# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-01-31 11:12+0100\n"
"PO-Revision-Date: 2019-05-23 00:37+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: tr_TR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: src/slic3r/GUI/AboutDialog.cpp:46 src/slic3r/GUI/AboutDialog.cpp:306
msgid "Portions copyright"
msgstr "Bölümler telif hakkı"

#: src/slic3r/GUI/AboutDialog.cpp:143 src/slic3r/GUI/AboutDialog.cpp:270
msgid "Copyright"
msgstr "Telif Hakkı"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:145
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""
"İlgili tüm programların (kütüphanelerin) lisans sözleşmeleri, ana uygulama "
"lisans sözleşmesinin bir parçasıdır"

#: src/slic3r/GUI/AboutDialog.cpp:214
#, c-format, boost-format
msgid "About %s"
msgstr "%s Hakkında"

#: src/slic3r/GUI/AboutDialog.cpp:245 src/slic3r/GUI/AboutDialog.cpp:370
#: src/slic3r/GUI/GUI_App.cpp:271
msgid "Version"
msgstr "Sürüm"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:272 src/slic3r/GUI/GUI_App.cpp:277
msgid "is licensed under the"
msgstr "lisans türü"

#: src/slic3r/GUI/AboutDialog.cpp:273 src/slic3r/GUI/GUI_App.cpp:277
msgid "GNU Affero General Public License, version 3"
msgstr "GNU Affero Genel Kamu Lisansı, sürüm 3"

#: src/slic3r/GUI/AboutDialog.cpp:274
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""
"PrusaSlicer, Alessandro Ranellucci ve RepRap topluluğuna ait olan Slic3r alt "
"yapısına sahiptir."

#: src/slic3r/GUI/AboutDialog.cpp:275
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph "
"Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik ve diğerlerinin katkıları "
"ile."

#: src/slic3r/GUI/AboutDialog.cpp:311
msgid "Copy Version Info"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:80
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
#, boost-format
msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:86
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:177
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:203
msgid "Slicing complete"
msgstr "Dilimleme tamamlandı"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:198
#, boost-format
msgid "Masked SLA file exported to %1%"
msgstr "Dışa aktarılan maskelenmiş SLA dosyası %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:294
msgid "Access violation"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:296
msgid "Illegal instruction"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:298
msgid "Divide by zero"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300
msgid "Overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:302
msgid "Underflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:305
msgid "Floating reserved operand"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:308
msgid "Stack overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:667
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:734
msgid "Running post-processing scripts"
msgstr "İşlem sonrası komutlar çalıştırılıyor"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:698
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:718
msgid "Unknown error occured during exporting G-code."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:706
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:709
#, boost-format
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:712
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:723
#, boost-format
msgid "G-code file exported to %1%"
msgstr "Dışa aktarılan G-code dosyası %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:737
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""
"Geçici G-code bilgilerinin kalıcı G-code çıktısına kopyalanma işlemiş "
"başarısız oldu"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:753
#, boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
"%1% için karşıya yükleme planlanıyor. Bkz. Pencere -> Ana Bilgisayar Yükleme "
"Sırası"

#: src/slic3r/GUI/BedShapeDialog.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1577
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:241 src/slic3r/GUI/Plater.cpp:219
#: src/slic3r/GUI/Tab.cpp:2695
msgid "Size"
msgstr "Boyut"

#: src/slic3r/GUI/BedShapeDialog.cpp:32
msgid "Origin"
msgstr "Başlangıç Noktası"

#: src/slic3r/GUI/BedShapeDialog.cpp:33
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1994
#: src/libslic3r/PrintConfig.cpp:1080
msgid "Diameter"
msgstr "Çap"

#: src/slic3r/GUI/BedShapeDialog.cpp:49
msgid "Size in X and Y of the rectangular plate."
msgstr "Dikdörtgen tablanın X ve Y eksen ölçüsü."

#: src/slic3r/GUI/BedShapeDialog.cpp:58
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr "0,0 G-code koordinatının dikdörtgenin sol ön köşesine olan mesafesi."

#: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:291
#: src/slic3r/GUI/ConfigWizard.cpp:1795 src/slic3r/GUI/ConfigWizard.cpp:1831
#: src/slic3r/GUI/ConfigWizard.cpp:1845
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
#: src/slic3r/GUI/GCodeViewer.cpp:3449 src/slic3r/GUI/GCodeViewer.cpp:3455
#: src/slic3r/GUI/GCodeViewer.cpp:3463 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:229
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:487
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:515
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1603
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1211
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1977
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:652
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:653
#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
#: src/slic3r/GUI/WipeTowerDialog.cpp:118 src/libslic3r/PrintConfig.cpp:280
#: src/libslic3r/PrintConfig.cpp:307 src/libslic3r/PrintConfig.cpp:314
#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:578
#: src/libslic3r/PrintConfig.cpp:604 src/libslic3r/PrintConfig.cpp:679
#: src/libslic3r/PrintConfig.cpp:687 src/libslic3r/PrintConfig.cpp:737
#: src/libslic3r/PrintConfig.cpp:873 src/libslic3r/PrintConfig.cpp:884
#: src/libslic3r/PrintConfig.cpp:902 src/libslic3r/PrintConfig.cpp:1083
#: src/libslic3r/PrintConfig.cpp:1295 src/libslic3r/PrintConfig.cpp:1362
#: src/libslic3r/PrintConfig.cpp:1372 src/libslic3r/PrintConfig.cpp:1652
#: src/libslic3r/PrintConfig.cpp:1846 src/libslic3r/PrintConfig.cpp:1907
#: src/libslic3r/PrintConfig.cpp:1925 src/libslic3r/PrintConfig.cpp:1943
#: src/libslic3r/PrintConfig.cpp:2006 src/libslic3r/PrintConfig.cpp:2016
#: src/libslic3r/PrintConfig.cpp:2130 src/libslic3r/PrintConfig.cpp:2139
#: src/libslic3r/PrintConfig.cpp:2158 src/libslic3r/PrintConfig.cpp:2179
#: src/libslic3r/PrintConfig.cpp:2191 src/libslic3r/PrintConfig.cpp:2199
#: src/libslic3r/PrintConfig.cpp:2240 src/libslic3r/PrintConfig.cpp:2248
#: src/libslic3r/PrintConfig.cpp:2258 src/libslic3r/PrintConfig.cpp:2266
#: src/libslic3r/PrintConfig.cpp:2274 src/libslic3r/PrintConfig.cpp:2342
#: src/libslic3r/PrintConfig.cpp:2573 src/libslic3r/PrintConfig.cpp:2643
#: src/libslic3r/PrintConfig.cpp:2660 src/libslic3r/PrintConfig.cpp:2761
#: src/libslic3r/PrintConfig.cpp:2770 src/libslic3r/PrintConfig.cpp:2820
#: src/libslic3r/PrintConfig.cpp:2906 src/libslic3r/PrintConfig.cpp:2916
#: src/libslic3r/PrintConfig.cpp:3039 src/libslic3r/PrintConfig.cpp:3127
#: src/libslic3r/PrintConfig.cpp:3134 src/libslic3r/PrintConfig.cpp:3141
#: src/libslic3r/PrintConfig.cpp:3155 src/libslic3r/PrintConfig.cpp:3179
#: src/libslic3r/PrintConfig.cpp:3189 src/libslic3r/PrintConfig.cpp:3199
#: src/libslic3r/PrintConfig.cpp:3353 src/libslic3r/PrintConfig.cpp:3362
#: src/libslic3r/PrintConfig.cpp:3371 src/libslic3r/PrintConfig.cpp:3381
#: src/libslic3r/PrintConfig.cpp:3422 src/libslic3r/PrintConfig.cpp:3477
#: src/libslic3r/PrintConfig.cpp:3487 src/libslic3r/PrintConfig.cpp:3499
#: src/libslic3r/PrintConfig.cpp:3519 src/libslic3r/PrintConfig.cpp:3538
#: src/libslic3r/PrintConfig.cpp:3548 src/libslic3r/PrintConfig.cpp:3692
#: src/libslic3r/PrintConfig.cpp:3733 src/libslic3r/PrintConfig.cpp:3932
#: src/libslic3r/PrintConfig.cpp:3947 src/libslic3r/PrintConfig.cpp:3961
#: src/libslic3r/PrintConfig.cpp:3972 src/libslic3r/PrintConfig.cpp:3985
#: src/libslic3r/PrintConfig.cpp:4030 src/libslic3r/PrintConfig.cpp:4040
#: src/libslic3r/PrintConfig.cpp:4049 src/libslic3r/PrintConfig.cpp:4059
#: src/libslic3r/PrintConfig.cpp:4075 src/libslic3r/PrintConfig.cpp:4099
#: src/libslic3r/PrintConfig.cpp:4128
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:66
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
"Baskı tablasının çapı. Başlangıç noktasının (0,0) merkezde olduğu "
"varsayılmaktadır."

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Rectangular"
msgstr "Dikdörtgen"

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Circular"
msgstr "Dairesel"

#: src/slic3r/GUI/BedShapeDialog.cpp:81
msgid "Custom"
msgstr "Özel"

#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:179
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1566
#: src/slic3r/GUI/GUI_ObjectList.cpp:1798
msgid "Shape"
msgstr "Şekil"

#: src/slic3r/GUI/BedShapeDialog.cpp:203
msgid "Load shape from STL..."
msgstr "STL dosyadan şekil yükle..."

#: src/slic3r/GUI/BedShapeDialog.cpp:249 src/slic3r/GUI/GCodeViewer.cpp:3914
#: src/slic3r/GUI/MainFrame.cpp:2237
msgid "Settings"
msgstr "Ayarlar"

#: src/slic3r/GUI/BedShapeDialog.cpp:273
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:283 src/slic3r/GUI/BedShapeDialog.cpp:354
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/BedShapeDialog.cpp:362
#: src/slic3r/GUI/Tab.cpp:3971
msgid "Remove"
msgstr "Kaldır"

#: src/slic3r/GUI/BedShapeDialog.cpp:317 src/slic3r/GUI/BedShapeDialog.cpp:388
msgid "Not found:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:344
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:506
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:512 src/slic3r/GUI/BedShapeDialog.cpp:560
#: src/slic3r/GUI/BedShapeDialog.cpp:582
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:523
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:531
msgid "The selected file contains no geometry."
msgstr "Seçilen dosya geometri içermiyor."

#: src/slic3r/GUI/BedShapeDialog.cpp:535
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr "Seçilen dosya birçok ayrı alan içerir. Bu durum desteklennozülktedir."

#: src/slic3r/GUI/BedShapeDialog.cpp:550
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:572
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:96 src/slic3r/GUI/ConfigWizard.cpp:1731
msgid "Bed Shape"
msgstr "Tabla Şekli"

#: src/slic3r/GUI/BonjourDialog.cpp:58
msgid "Network lookup"
msgstr "Ağ araması"

#: src/slic3r/GUI/BonjourDialog.cpp:75 src/slic3r/GUI/BonjourDialog.cpp:253
msgid "Address"
msgstr "Adres"

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "Hostname"
msgstr "Ana bilgisayar adı"

#: src/slic3r/GUI/BonjourDialog.cpp:77
msgid "Service name"
msgstr "Servis ismi"

#: src/slic3r/GUI/BonjourDialog.cpp:79
msgid "OctoPrint version"
msgstr "OctoPrint sürümü"

#: src/slic3r/GUI/BonjourDialog.cpp:227
msgid "Searching for devices"
msgstr "Cihazlar aranıyor"

#: src/slic3r/GUI/BonjourDialog.cpp:234
msgid "Finished"
msgstr "Bitti"

#: src/slic3r/GUI/BonjourDialog.cpp:240
msgid "Multiple resolved IP addresses"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:249
#, boost-format
msgid ""
"There are several IP addresses resolving to hostname %1%.\n"
"Please select one that should be used."
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:21
msgid "Palette 1 (default)"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:22
msgid "Palette 2"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:23
msgid "Palette 3"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:24
msgid "Palette 4"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:25
msgid "Palette 5"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:26
msgid "Palette 6"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:27
msgid "Palette 7"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:28
msgid "Palette 8"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:112
msgid "Revert color to default"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:127
msgid "Value is the same as the system value"
msgstr "Girilen değer sistem değeriyle aynıdır"

#: src/slic3r/GUI/ButtonsDescription.cpp:128
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""
"Değer değiştirildi ve sistem değerine ya da son kaydedilen ön ayara eşit "
"değil"

#: src/slic3r/GUI/ButtonsDescription.cpp:155
msgid "Default palette for mode markers"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2411
#: src/slic3r/GUI/wxExtensions.cpp:759
msgid "Simple"
msgstr "Basit"

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2413
#: src/slic3r/GUI/wxExtensions.cpp:759
msgctxt "Mode"
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2414
#: src/slic3r/GUI/wxExtensions.cpp:759
msgid "Expert"
msgstr "Uzman"

#: src/slic3r/GUI/ButtonsDescription.cpp:182
msgid "Revert color"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:200
msgid "Buttons And Text Colors Description"
msgstr "Düğme ve Metin Renk Açıklamaları"

#: src/slic3r/GUI/ConfigManipulation.cpp:50
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:51
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1394
#: src/libslic3r/PrintConfig.cpp:303
msgid "Layer height"
msgstr "Katman yüksekliği"

#: src/slic3r/GUI/ConfigManipulation.cpp:62
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:63 src/libslic3r/PrintConfig.cpp:1291
msgid "First layer height"
msgstr "İlk katman yüksekliği"

#: src/slic3r/GUI/ConfigManipulation.cpp:83
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:91
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:92
msgid "Spiral Vase"
msgstr "Spiral Vazo"

#: src/slic3r/GUI/ConfigManipulation.cpp:122
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:126
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:127
#: src/slic3r/GUI/ConfigManipulation.cpp:147
msgid "Wipe Tower"
msgstr "Kule Sil"

#: src/slic3r/GUI/ConfigManipulation.cpp:143
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:146
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:165
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:168
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:169
msgid "Support Generator"
msgstr "Destek Üreticisi"

#: src/slic3r/GUI/ConfigManipulation.cpp:196
#, boost-format
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:199
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:200
#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
#: src/slic3r/GUI/Plater.cpp:466 src/slic3r/GUI/Tab.cpp:1451
#: src/slic3r/GUI/Tab.cpp:1453 src/libslic3r/PrintConfig.cpp:499
#: src/libslic3r/PrintConfig.cpp:774 src/libslic3r/PrintConfig.cpp:795
#: src/libslic3r/PrintConfig.cpp:1158 src/libslic3r/PrintConfig.cpp:1172
#: src/libslic3r/PrintConfig.cpp:1209 src/libslic3r/PrintConfig.cpp:1458
#: src/libslic3r/PrintConfig.cpp:1468 src/libslic3r/PrintConfig.cpp:1537
#: src/libslic3r/PrintConfig.cpp:1557 src/libslic3r/PrintConfig.cpp:1576
#: src/libslic3r/PrintConfig.cpp:2403 src/libslic3r/PrintConfig.cpp:2420
msgid "Infill"
msgstr "Dolgu"

#: src/slic3r/GUI/ConfigManipulation.cpp:345
msgid "Head penetration should not be greater than the head width."
msgstr "Kafa penetrasyonu kafa genişliğinden daha büyük olmamalıdır."

#: src/slic3r/GUI/ConfigManipulation.cpp:347
msgid "Invalid Head penetration"
msgstr "Geçersiz kafa penetrasyonu"

#: src/slic3r/GUI/ConfigManipulation.cpp:358
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "Pinhead çapı, sütun çapından daha küçük olmalıdır."

#: src/slic3r/GUI/ConfigManipulation.cpp:360
msgid "Invalid pinhead diameter"
msgstr "Geçersiz iğne başı çapı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Upgrade"
msgstr "Sürüm yükselt"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Downgrade"
msgstr "Sürüm düşür"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "Before roll back"
msgstr "Geri almadan önce"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:26 src/libslic3r/PrintConfig.cpp:357
msgid "User"
msgstr "Kullanıcı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:29
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1126
msgid "Unknown"
msgstr "Bilinmiyor"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "Active"
msgstr "Aktif"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 src/libslic3r/Preset.cpp:1478
msgid "print"
msgstr "yazdır"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64
msgid "filaments"
msgstr "filamentler"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67 src/libslic3r/Preset.cpp:1480
msgid "SLA print"
msgstr "SLA baskısı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
#: src/slic3r/GUI/ConfigWizard.cpp:794 src/slic3r/GUI/GUI.cpp:354
#: src/slic3r/GUI/Plater.cpp:848 src/libslic3r/Preset.cpp:1481
msgid "SLA material"
msgstr "SLA malzemesi"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70 src/libslic3r/Preset.cpp:1482
msgid "printer"
msgstr "yazıcı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:74 src/slic3r/GUI/Tab.cpp:1311
msgid "vendor"
msgstr "üretici"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:74
msgid "version"
msgstr "sürüm"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:77
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:80
msgid "model"
msgstr "model"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:80
msgid "variants"
msgstr "varyantlar"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:92
#, c-format, boost-format
msgid "Incompatible with this %s"
msgstr "%s ile uyumsuz"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:95
msgid "Activate"
msgstr "Etkinleştir"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:122
msgid "Configuration Snapshots"
msgstr "Yapılandırma Anlık Görüntüleri"

#: src/slic3r/GUI/ConfigWizard.cpp:291
msgid "nozzle"
msgstr "nozül"

#: src/slic3r/GUI/ConfigWizard.cpp:295
msgid "Alternate nozzles:"
msgstr "Alternatif nozüller:"

#: src/slic3r/GUI/ConfigWizard.cpp:359
msgid "All standard"
msgstr "Tüm standartlar"

#: src/slic3r/GUI/ConfigWizard.cpp:359
msgid "Standard"
msgstr "Standart"

#: src/slic3r/GUI/ConfigWizard.cpp:360 src/slic3r/GUI/ConfigWizard.cpp:681
#: src/slic3r/GUI/Preferences.cpp:556 src/slic3r/GUI/Tab.cpp:4056
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1182
msgid "All"
msgstr "Tümü"

#: src/slic3r/GUI/ConfigWizard.cpp:361 src/slic3r/GUI/ConfigWizard.cpp:682
#: src/slic3r/GUI/DoubleSlider.cpp:2099
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1984 src/slic3r/GUI/Plater.cpp:438
#: src/slic3r/GUI/Plater.cpp:592 src/slic3r/GUI/Preferences.cpp:556
#: src/libslic3r/PrintConfig.cpp:1351
msgid "None"
msgstr "Hiçbiri"

#: src/slic3r/GUI/ConfigWizard.cpp:513
#, c-format, boost-format
msgid "Welcome to the %s Configuration Assistant"
msgstr "%s Yapılandırma Asistanına Hoş Geldiniz"

#: src/slic3r/GUI/ConfigWizard.cpp:515
#, c-format, boost-format
msgid "Welcome to the %s Configuration Wizard"
msgstr "%s Yapılandırma Sihirbazına Hoş Geldiniz"

#: src/slic3r/GUI/ConfigWizard.cpp:517
msgid "Welcome"
msgstr "Hoşgeldiniz"

#: src/slic3r/GUI/ConfigWizard.cpp:519
#, c-format, boost-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""
"Merhaba, %s uygulamasına hoş geldiniz! Bu %s, ilk yapılandırmada size "
"yardımcı olacak ve sadece birkaç ayar yaptıktan sonra yazdırmaya hazır "
"olacaksınız."

#: src/slic3r/GUI/ConfigWizard.cpp:524
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:527
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:579
#, c-format, boost-format
msgid "%s Family"
msgstr "%s Ailesi"

#: src/slic3r/GUI/ConfigWizard.cpp:670
msgid "Printer:"
msgstr "Yazıcı:"

#: src/slic3r/GUI/ConfigWizard.cpp:672
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:673
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:750 src/slic3r/GUI/ConfigWizard.cpp:938
#: src/slic3r/GUI/ConfigWizard.cpp:1024 src/slic3r/GUI/ConfigWizard.cpp:1164
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:754 src/slic3r/GUI/ConfigWizard.cpp:1166
msgid "(Templates)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:789
#, boost-format
msgid ""
"%1% visible for <b>(\"Template\")</b> printer are universal profiles "
"available for all printers. These might not be compatible with your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:789 src/slic3r/GUI/ConfigWizard.cpp:791
#: src/slic3r/GUI/ConfigWizard.cpp:2409 src/slic3r/GUI/ConfigWizard.cpp:3353
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:789 src/slic3r/GUI/ConfigWizard.cpp:791
msgid "SLA materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:791
#, boost-format
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:794
#, boost-format
msgid "All installed printers are compatible with the selected %1%."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:794 src/libslic3r/Preset.cpp:1479
msgid "filament"
msgstr "filaman"

#: src/slic3r/GUI/ConfigWizard.cpp:818
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:819
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1214
msgid ""
"You have selected template filament. Please note that these filaments are "
"available for all printers but are NOT certain to be compatible with your "
"printer. Do you still wish to have this filament selected?\n"
"(This message won't be displayed again.)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1215 src/slic3r/GUI/ConfigWizard.cpp:2719
#: src/slic3r/GUI/ConfigWizard.cpp:2858 src/slic3r/GUI/DoubleSlider.cpp:2591
#: src/slic3r/GUI/DoubleSlider.cpp:2612 src/slic3r/GUI/GUI.cpp:245
#: src/slic3r/GUI/GUI_App.cpp:3416 src/slic3r/GUI/UpdateDialogs.cpp:204
#: src/slic3r/GUI/UpdateDialogs.cpp:212 src/slic3r/GUI/UpdateDialogs.cpp:217
#: src/slic3r/GUI/UpdateDialogs.cpp:222 src/slic3r/GUI/UpdateDialogs.cpp:229
#: src/slic3r/GUI/UpdateDialogs.cpp:234
msgid "Notice"
msgstr "Bilgilendirme"

#: src/slic3r/GUI/ConfigWizard.cpp:1263
msgid "Custom Printer Setup"
msgstr "Özel Yazıcı Ayarı"

#: src/slic3r/GUI/ConfigWizard.cpp:1263
msgid "Custom Printer"
msgstr "Özel Yazıcı"

#: src/slic3r/GUI/ConfigWizard.cpp:1265
msgid "Define a custom printer profile"
msgstr "Özel bir yazıcı profili tanımla"

#: src/slic3r/GUI/ConfigWizard.cpp:1266
msgid "Custom profile name:"
msgstr "Özel profil ismi:"

#: src/slic3r/GUI/ConfigWizard.cpp:1283
msgid "Automatic updates"
msgstr "Otomatik güncelleme"

#: src/slic3r/GUI/ConfigWizard.cpp:1283
msgid "Updates"
msgstr "Güncellemeler"

#: src/slic3r/GUI/ConfigWizard.cpp:1291
msgid "Check for application updates"
msgstr "Güncellemeleri kontrol et"

#: src/slic3r/GUI/ConfigWizard.cpp:1295
#, c-format, boost-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"Eğer etkinse, %s çevrimiçi olarak yeni uygulama sürümlerini kontrol eder. "
"Yeni bir sürüm kullanıma sunulduğunda, bir sonraki uygulama başlangıcında "
"(hiçbir zaman program kullanımı sırasında değil) bir bildirim görüntülenir. "
"Bu sadece bir bildirim mekanizmasıdır, otomatik kurulum yapılmaz."

#: src/slic3r/GUI/ConfigWizard.cpp:1301 src/slic3r/GUI/Preferences.cpp:309
msgid "Update built-in Presets automatically"
msgstr "Yerleşik Hazır Ayarları otomatik olarak güncelle"

#: src/slic3r/GUI/ConfigWizard.cpp:1305
#, c-format, boost-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Eğer etkinse, %s arka planda yerleşik sistem ön ayarları "
"güncelleştirmelerini indirir. Bu güncellemeler ayrı bir geçici konuma "
"indirilir. Yeni bir ön ayar sürümü kullanılabilir olduğunda, uygulama "
"başlangıcında sunulur."

#: src/slic3r/GUI/ConfigWizard.cpp:1308
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"Güncellemeler, kullanıcının izni olmadan asla uygulanmaz ve asla "
"kullanıcının kişisel ayarlarının üzerine yazılmaz."

#: src/slic3r/GUI/ConfigWizard.cpp:1313
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Ek olarak, bir güncelleme uygulanmadan önce tüm konfigürasyonun bir yedeği "
"oluşturulur."

#: src/slic3r/GUI/ConfigWizard.cpp:1362 src/slic3r/GUI/Preferences.cpp:1086
msgid "Download path"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1367 src/slic3r/GUI/FirmwareDialog.cpp:815
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:302
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:377
msgid "Browse"
msgstr "Gözat"

#: src/slic3r/GUI/ConfigWizard.cpp:1372
msgid "Choose folder:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1410
msgid "Downloads from URL"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1410
msgid "Downloads"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1418
msgid "Allow build-in downloader"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1425
#, c-format, boost-format
msgid ""
"If enabled, %s registers to start on custom URL on www.printables.com. You "
"will be able to use button with %s logo to open models in this %s. The model "
"will be downloaded into folder you choose bellow."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1432
msgid ""
"On Linux systems the process of registration also creates desktop "
"integration files for this version of application."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Chosen directory for downloads does not Exists."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1544 src/slic3r/GUI/GUI_Factories.cpp:810
#: src/slic3r/GUI/Plater.cpp:3677 src/slic3r/GUI/Plater.cpp:3828
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1547
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1551
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1560
msgid "Files association"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1562 src/slic3r/GUI/Preferences.cpp:295
msgid "Associate .3mf files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1563 src/slic3r/GUI/Preferences.cpp:300
msgid "Associate .stl files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1573
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1575
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1580
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1581
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1582
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1595
msgid "The size of the object can be specified in inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1596
msgid "Use inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1616
msgid "Other Vendors"
msgstr "Diğer Üreticiler"

#: src/slic3r/GUI/ConfigWizard.cpp:1620
#, c-format, boost-format
msgid "Pick another vendor supported by %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1653
msgid "Firmware Type"
msgstr "Yazılım Türü"

#: src/slic3r/GUI/ConfigWizard.cpp:1653 src/slic3r/GUI/Tab.cpp:2352
msgid "Firmware"
msgstr "Yazılım"

#: src/slic3r/GUI/ConfigWizard.cpp:1657
msgid "Choose the type of firmware used by your printer."
msgstr "Yazıcınız tarafından kullanılan yazılım türünü seçin."

#: src/slic3r/GUI/ConfigWizard.cpp:1706 src/slic3r/GUI/ConfigWizard.cpp:1777
#: src/slic3r/GUI/ConfigWizard.cpp:1782 src/slic3r/GUI/ConfigWizard.cpp:1787
#: src/slic3r/GUI/Field.cpp:255 src/slic3r/GUI/Field.cpp:325
#: src/slic3r/GUI/Field.cpp:1622 src/slic3r/GUI/GUI_ObjectLayers.cpp:435
msgid "Invalid numeric input."
msgstr "Geçersiz nümerik giriş."

#: src/slic3r/GUI/ConfigWizard.cpp:1731
msgid "Bed Shape and Size"
msgstr "Tabla Şekil ve Ölçüsü"

#: src/slic3r/GUI/ConfigWizard.cpp:1734
msgid "Set the shape of your printer's bed."
msgstr "Yazıcı tablasının şeklini ayarlayın."

#: src/slic3r/GUI/ConfigWizard.cpp:1754
msgid "Build Volume"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1757
msgid "Set vertical size of your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1794
msgid "Max print height:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1812
msgid "Filament and Nozzle Diameters"
msgstr "Filament ve Nozül Çapları"

#: src/slic3r/GUI/ConfigWizard.cpp:1812
msgid "Print Diameters"
msgstr "Baskı Çapları"

#: src/slic3r/GUI/ConfigWizard.cpp:1827
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "Yazıcınızın nozül çapını girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1830
msgid "Nozzle Diameter:"
msgstr "Nozül Çapı:"

#: src/slic3r/GUI/ConfigWizard.cpp:1840
msgid "Enter the diameter of your filament."
msgstr "Filament çapını girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1841
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"İyi bir hassasiyet gereklidir, bu nedenle bir kumpas kullanın ve filament "
"boyunca birçok ölçüm yapın, ardından ortalama değeri girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1844
msgid "Filament Diameter:"
msgstr "Filament Çapı:"

#: src/slic3r/GUI/ConfigWizard.cpp:1902
msgid "Nozzle and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1902
msgid "Temperatures"
msgstr "Sıcaklıklar"

#: src/slic3r/GUI/ConfigWizard.cpp:1918
msgid "Enter the temperature needed for extruding your filament."
msgstr "Filament ilerletmek için gereken sıcaklığı girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1919
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "Temel kural PLA için 160 ila 230 °C ve ABS için 215 ila 250 °C'dir."

#: src/slic3r/GUI/ConfigWizard.cpp:1922
msgid "Extrusion Temperature:"
msgstr "Ekstrüder Sıcaklığı:"

#: src/slic3r/GUI/ConfigWizard.cpp:1923 src/slic3r/GUI/ConfigWizard.cpp:1937
#: src/libslic3r/PrintConfig.cpp:442 src/libslic3r/PrintConfig.cpp:1271
#: src/libslic3r/PrintConfig.cpp:1326 src/libslic3r/PrintConfig.cpp:2949
#: src/libslic3r/PrintConfig.cpp:3741
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:1932
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""
"Filamentin ısıtılmış tablaya yapışmasını sağlamak için gereken sıcaklığı "
"girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1933
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"Genel kural PLA için 60 °C ve ABS için 110 °C'dir. Isıtılmış tabla yoksa "
"sıfır girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1936
msgid "Bed Temperature:"
msgstr "Tabla Sıcaklığı:"

#: src/slic3r/GUI/ConfigWizard.cpp:2409 src/slic3r/GUI/ConfigWizard.cpp:3356
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2463
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2468
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2717
#, boost-format
msgid ""
"Following printer profiles has no default filament: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2718
#, boost-format
msgid ""
"Following printer profiles has no default material: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2879
msgid "The following FFF printer models have no filament selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2883
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2897
msgid "The following SLA printer models have no materials selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2901
msgid "Do you want to select default SLA materials for these printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2943
msgid "Configuration is edited in ConfigWizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2996
msgid "All user presets will be deleted."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3033
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/ConfigWizard.cpp:3063
msgid "Do you want to continue changing the configuration?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3130
msgid "A new Printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3135
msgid "Some Printers were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3156
msgid "A new filament was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3157
msgid "A new SLA material was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3168
msgid "Some filaments were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3168
msgid "Some SLA materials were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3211
msgid "Custom printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3299
msgid "Select all standard printers"
msgstr "Tüm standart yazıcıları seç"

#: src/slic3r/GUI/ConfigWizard.cpp:3302
msgid "< &Back"
msgstr "< &Geri"

#: src/slic3r/GUI/ConfigWizard.cpp:3303
msgid "&Next >"
msgstr "&İleri >"

#: src/slic3r/GUI/ConfigWizard.cpp:3304
msgid "&Finish"
msgstr "&Bitti"

#: src/slic3r/GUI/ConfigWizard.cpp:3305
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:537
#: src/slic3r/GUI/FirmwareDialog.cpp:153
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1594
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1365
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:96
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:907
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1630
msgid "Cancel"
msgstr "İptal"

#: src/slic3r/GUI/ConfigWizard.cpp:3325
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF Teknoloji Yazıcılar"

#: src/slic3r/GUI/ConfigWizard.cpp:3333
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA Teknoloji Yazıcılar"

#: src/slic3r/GUI/ConfigWizard.cpp:3353
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3353 src/slic3r/GUI/ConfigWizard.cpp:3356
#: src/slic3r/GUI/GUI_ObjectList.cpp:4347
msgid "Type:"
msgstr "Tür:"

#: src/slic3r/GUI/ConfigWizard.cpp:3356
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3479
msgid "Configuration Assistant"
msgstr "Yapılandırma Asistanı"

#: src/slic3r/GUI/ConfigWizard.cpp:3480
msgid "Configuration &Assistant"
msgstr "Yapılandırma &Asistanı"

#: src/slic3r/GUI/ConfigWizard.cpp:3482
msgid "Configuration Wizard"
msgstr "Yapılandırma Sihirbazını"

#: src/slic3r/GUI/ConfigWizard.cpp:3483
msgid "Configuration &Wizard"
msgstr "Yapılandırma Sihirbazı"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
msgid "Performing desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:378
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:418
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:448
msgid ""
"Performing desktop integration failed - could not create URL Protocol "
"desktop file."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:506
#: src/slic3r/GUI/GUI_App.cpp:2396
msgid "Desktop Integration"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:513
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:527
msgid "Perform"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:533
#: src/slic3r/GUI/GLCanvas3D.cpp:4810 src/slic3r/GUI/KBShortcutsDialog.cpp:106
#: src/slic3r/GUI/MainFrame.cpp:1422
msgid "Undo"
msgstr "Geri Al"

#: src/slic3r/GUI/DoubleSlider.cpp:109
msgid "Place bearings in slots and resume printing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1448
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1450
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1454 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to move"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1457
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1460
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1465
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1467
msgid "This is wipe tower layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1477
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing sequentually."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1481
msgid "Print mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1495
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1497
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1499
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1500
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1502
msgid "Add another code - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1503
msgid "Add another code - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1509
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1527
msgid "continue"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1535
#, boost-format
msgid "Color change (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1536
#, boost-format
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1538
#, boost-format
msgid "Pause print (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1540
#, boost-format
msgid "Custom template (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1542
#, boost-format
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1549
msgid "Note"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1551
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1554
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1557
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1560
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1565
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1567
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1568
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1671 src/slic3r/GUI/DoubleSlider.cpp:1702
#: src/slic3r/GUI/GUI_Factories.cpp:862
#, c-format, boost-format
msgid "Extruder %d"
msgstr "Ekstrüder %d"

#: src/slic3r/GUI/DoubleSlider.cpp:1672 src/slic3r/GUI/GUI_Factories.cpp:863
msgid "active"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1681
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1681 src/slic3r/GUI/GUI_Factories.cpp:824
msgid "Change extruder"
msgstr "Ekstrüder değiştir"

#: src/slic3r/GUI/DoubleSlider.cpp:1682
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1684 src/slic3r/GUI/GUI_Factories.cpp:871
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1703
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1711
#, boost-format
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1712
#, boost-format
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2037
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2048
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2052
msgid "Add custom template"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2055
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2073
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2074
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2075
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2081
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2082
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2083
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2084
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2094 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2099
msgid "Hide ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2116
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2120
msgid "Set auto color changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2155
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2156 src/slic3r/GUI/Tab.cpp:1263
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2157
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:530
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1115 src/slic3r/GUI/GUI.cpp:258
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:719
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:749
#: src/slic3r/GUI/WipeTowerDialog.cpp:60 src/slic3r/GUI/WipeTowerDialog.cpp:445
msgid "Warning"
msgstr "Uyarı"

#: src/slic3r/GUI/DoubleSlider.cpp:2285
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2286
#, boost-format
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2307
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2308
#, boost-format
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the move you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2584
msgid "The last color change data was saved for a single extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2585 src/slic3r/GUI/DoubleSlider.cpp:2601
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2587
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2588 src/slic3r/GUI/DoubleSlider.cpp:2609
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2602
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2605
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2607
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2608
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:150
#, boost-format
msgid ""
"Download won't start. Download URL doesn't point to https://files.printables."
"com : %1%"
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:181
msgid "The download has failed:"
msgstr ""

#: src/slic3r/GUI/DownloaderFileGet.cpp:176
#, boost-format
msgid "Can't create file at %1%."
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:323 src/slic3r/GUI/GUI_ObjectList.cpp:571
#: src/slic3r/GUI/GUI_ObjectList.cpp:583 src/slic3r/GUI/GUI_ObjectList.cpp:1043
#: src/slic3r/GUI/GUI_ObjectList.cpp:2127
#: src/slic3r/GUI/GUI_ObjectList.cpp:3007
#: src/slic3r/GUI/GUI_ObjectList.cpp:4877
#: src/slic3r/GUI/ObjectDataViewModel.cpp:259 src/libslic3r/PrintConfig.cpp:860
msgid "default"
msgstr "varsayılan"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
#: src/libslic3r/PrintConfig.cpp:720 src/libslic3r/PrintConfig.cpp:1471
#: src/libslic3r/PrintConfig.cpp:2168 src/libslic3r/PrintConfig.cpp:2349
#: src/libslic3r/PrintConfig.cpp:2425 src/libslic3r/PrintConfig.cpp:2679
#: src/libslic3r/PrintConfig.cpp:2727 src/libslic3r/PrintConfig.cpp:2746
msgid "layers"
msgstr "katman"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
msgid "Random sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
msgid "Allow next color repetition"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:190
msgid "default value"
msgstr "varsayılan değer"

#: src/slic3r/GUI/Field.cpp:193
msgid "parameter name"
msgstr "parametre ismi"

#: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:840
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1095
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1107
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:226 src/slic3r/GUI/Field.cpp:299
#, c-format, boost-format
msgid "%s doesn't support percentage"
msgstr "%s yüzde değer desteklemiyor"

#: src/slic3r/GUI/Field.cpp:266
#, c-format, boost-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""

#: src/slic3r/GUI/Field.cpp:269 src/slic3r/GUI/Field.cpp:344
msgid "Parameter validation"
msgstr "Parametre doğrulama"

#: src/slic3r/GUI/Field.cpp:282 src/slic3r/GUI/Field.cpp:391
#: src/slic3r/GUI/Field.cpp:1634
msgid "Input value is out of range"
msgstr "Girilen değer limit dışı"

#: src/slic3r/GUI/Field.cpp:341
#, c-format, boost-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:398
#, boost-format
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:170
msgid "Archive preview"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flash!"
msgstr "Yükle!"

#: src/slic3r/GUI/FirmwareDialog.cpp:154
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "Yükleme devam ediyor. Lütfen yazıcı bağlantısını kesmeyin!"

#: src/slic3r/GUI/FirmwareDialog.cpp:201
msgid "Flashing failed"
msgstr "Yükleme başarısız"

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing succeeded!"
msgstr "Yükleme tamamlandı!"

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing failed. Please see the avrdude log below."
msgstr "Yükleme başarısız. Lütfen aşağıdaki avrdude olay kaydına bakınız."

#: src/slic3r/GUI/FirmwareDialog.cpp:285
msgid "Flashing cancelled."
msgstr "Yükleme iptal edildi."

#: src/slic3r/GUI/FirmwareDialog.cpp:333
#, c-format, boost-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"Yazılım dosyası yazıcı modeli ile uyumlu değil.\n"
"Yazılımın ait olduğu yazıcı: %s\n"
"Mevcut yazıcı: %s\n"
"\n"
"Yine de bu yazılım dosyasını yüklemek istiyor musunuz?\n"
"Lütfen bu işlemin doğru olduğundan eminseniz devam ediniz."

#: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455
#, c-format, boost-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""
"Birden çok %s yazıcı bulundu. Lütfen yükleme için bir defada yalnızca birini "
"bağlayın."

#: src/slic3r/GUI/FirmwareDialog.cpp:437
#, c-format, boost-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"%s aygıtı bulunamadı.\n"
"Cihaz bağlıysa, lütfen USB konektörünün yanındaki Sıfırla düğmesine basın ..."

#: src/slic3r/GUI/FirmwareDialog.cpp:549
#, c-format, boost-format
msgid "The %s device could not have been found"
msgstr "%s cihazı bulunamadı"

#: src/slic3r/GUI/FirmwareDialog.cpp:650
#, c-format, boost-format
msgid "Error accessing port at %s: %s"
msgstr "%s konumundaki bağlantı noktasına erişim hatası: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:652
#, c-format, boost-format
msgid "Error: %s"
msgstr "Hata : %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:787
msgid "Firmware flasher"
msgstr "Yazılım yükleme"

#: src/slic3r/GUI/FirmwareDialog.cpp:812
msgid "Firmware image:"
msgstr "Yazılım dosyası:"

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Select a file"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Serial port:"
msgstr "Bağlantı noktası:"

#: src/slic3r/GUI/FirmwareDialog.cpp:819
msgid "Autodetected"
msgstr "Otomatik tanımlandı"

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Rescan"
msgstr "Yenile"

#: src/slic3r/GUI/FirmwareDialog.cpp:827
msgid "Progress:"
msgstr "İlerleme:"

#: src/slic3r/GUI/FirmwareDialog.cpp:830
msgid "Status:"
msgstr "Durum:"

#: src/slic3r/GUI/FirmwareDialog.cpp:831
msgid "Ready"
msgstr "Hazır"

#: src/slic3r/GUI/FirmwareDialog.cpp:851
msgid "Advanced: Output log"
msgstr "Gelişmiş: Çıktı günlüğü"

#: src/slic3r/GUI/FirmwareDialog.cpp:862
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:358
#: src/slic3r/GUI/Mouse3DController.cpp:543
#: src/slic3r/GUI/PrintHostDialogs.cpp:312
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:125
msgid "Close"
msgstr "Kapat"

#: src/slic3r/GUI/FirmwareDialog.cpp:915
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"Yazılım yüklemesini iptal etmek istediğinize emin misiniz?\n"
"Bu işlem yazıcınızı kullanılamaz durumda bırakabilir!"

#: src/slic3r/GUI/FirmwareDialog.cpp:916
msgid "Confirmation"
msgstr "Onaylama"

#: src/slic3r/GUI/FirmwareDialog.cpp:919
msgid "Cancelling..."
msgstr "İptal ediliyor..."

#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1484
msgid "Shape Gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:76
msgid "Select shape from the gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:114 src/slic3r/GUI/Tab.cpp:4375
msgid "Add"
msgstr "Ekle"

#: src/slic3r/GUI/GalleryDialog.cpp:114
msgid "Add one or more custom shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:115 src/slic3r/GUI/GalleryDialog.cpp:528
#: src/slic3r/GUI/GLCanvas3D.cpp:4611
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1945
#: src/slic3r/GUI/GUI_Factories.cpp:460 src/slic3r/GUI/Tab.cpp:3971
msgid "Delete"
msgstr "Sil"

#: src/slic3r/GUI/GalleryDialog.cpp:115
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:142
msgid "Add to bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:142
msgid "OK"
msgstr "Tamam"

#: src/slic3r/GUI/GalleryDialog.cpp:143
msgid "Add selected shape(s) to the bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:422
msgid "Choose one or more files (STL, OBJ):"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:462
#, boost-format
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:473
msgid "Choose one PNG file:"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:486
msgid "Replacing of the PNG"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:530
msgid "Change thumbnail"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:571 src/slic3r/GUI/GalleryDialog.cpp:576
#, boost-format
msgid "Loading of the \"%1%\""
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:343
msgid "Tool position"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1547
msgid "Generating toolpaths"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1619
msgid "Generating vertex buffer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1979
msgid "Generating index buffers"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3271
msgid "Click to hide"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3271
msgid "Click to show"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3449
msgid "up to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3455
msgid "above"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3463
msgid "from"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3463
msgid "to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3513 src/slic3r/GUI/GCodeViewer.cpp:3514
#: src/slic3r/GUI/GCodeViewer.cpp:3592
msgid "Percentage"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3524 src/slic3r/GUI/GCodeViewer.cpp:3570
msgid "Feature type"
msgstr "Özellikler"

#: src/slic3r/GUI/GCodeViewer.cpp:3524 src/slic3r/GUI/GCodeViewer.cpp:3592
#: src/slic3r/GUI/RammingChart.cpp:90
msgid "Time"
msgstr "Zaman"

#: src/slic3r/GUI/GCodeViewer.cpp:3571
msgid "Height (mm)"
msgstr "Yükseklik (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3572
msgid "Width (mm)"
msgstr "Genişlik (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3573
msgid "Speed (mm/s)"
msgstr "Hız (mm / s)"

#: src/slic3r/GUI/GCodeViewer.cpp:3574
msgid "Fan speed (%)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3575
msgid "Temperature (°C)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3576
msgid "Volumetric flow rate (mm³/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3577
msgid "Layer time (linear)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3578
msgid "Layer time (logarithmic)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3579
msgid "Tool"
msgstr "Araç"

#: src/slic3r/GUI/GCodeViewer.cpp:3580
msgid "Color Print"
msgstr "Renkli baskı"

#: src/slic3r/GUI/GCodeViewer.cpp:3592 src/slic3r/GUI/GCodeViewer.cpp:3594
#: src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Used filament"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3623 src/slic3r/GUI/GCodeViewer.cpp:4067
#: src/libslic3r/PrintConfig.cpp:3044
msgid "Travel"
msgstr "Boşta ilerleme"

#: src/slic3r/GUI/GCodeViewer.cpp:3640 src/slic3r/GUI/GCodeViewer.cpp:3685
#: src/slic3r/GUI/GCodeViewer.cpp:3689 src/slic3r/GUI/GUI_ObjectList.cpp:338
#: src/slic3r/GUI/wxExtensions.cpp:547 src/libslic3r/PrintConfig.cpp:855
msgid "Extruder"
msgstr "Ekstrüder"

#: src/slic3r/GUI/GCodeViewer.cpp:3662
msgid "Default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3685
msgid "default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3785 src/slic3r/GUI/GCodeViewer.cpp:3841
msgid "Color change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3804 src/slic3r/GUI/GCodeViewer.cpp:3839
msgid "Print"
msgstr "Yazdır"

#: src/slic3r/GUI/GCodeViewer.cpp:3840 src/slic3r/GUI/GCodeViewer.cpp:3874
msgid "Pause"
msgstr "Duraklat"

#: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Event"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Remaining time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Duration"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3928 src/slic3r/GUI/GUI.cpp:355
#: src/slic3r/GUI/Plater.cpp:849 src/libslic3r/PrintConfig.cpp:339
msgid "Printer"
msgstr "Yazıcı"

#: src/slic3r/GUI/GCodeViewer.cpp:3931 src/slic3r/GUI/GUI.cpp:351
#: src/slic3r/GUI/Plater.cpp:845
msgid "Print settings"
msgstr "Baskı ayarları"

#: src/slic3r/GUI/GCodeViewer.cpp:3936 src/slic3r/GUI/GUI.cpp:353
#: src/slic3r/GUI/Plater.cpp:846 src/slic3r/GUI/Tab.cpp:1940
#: src/slic3r/GUI/Tab.cpp:1941
msgid "Filament"
msgstr "Filament"

#: src/slic3r/GUI/GCodeViewer.cpp:3950
msgid "Estimated printing times"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3969
msgid "Normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3970
msgid "Stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3979 src/libslic3r/PrintConfig.cpp:1249
#: src/libslic3r/PrintConfig.cpp:1267 src/libslic3r/PrintConfig.cpp:1277
#: src/libslic3r/PrintConfig.cpp:1322
msgid "First layer"
msgstr "İlk katman"

#: src/slic3r/GUI/GCodeViewer.cpp:3983
msgid "Total"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4002
msgid "Show stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4006
msgid "Show normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4071
msgid "Wipe"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4075
msgid "Retractions"
msgstr "Geri Çekme"

#: src/slic3r/GUI/GCodeViewer.cpp:4079
msgid "Deretractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4083
msgid "Seams"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4087
msgid "Tool changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4091
msgid "Color changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4095
msgid "Print pauses"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4099
msgid "Custom G-codes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4103
msgid "Center of gravity"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4108
msgid "Shells"
msgstr "Duvarlar"

#: src/slic3r/GUI/GCodeViewer.cpp:4113
msgid "Tool marker"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:185 src/slic3r/GUI/GLCanvas3D.cpp:4757
#: src/slic3r/GUI/ObjectDataViewModel.cpp:71
msgid "Variable layer height"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:187
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:189
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:191
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:193
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:195
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:197
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:199
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:201
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:203
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:205
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:208
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:214
msgid "Quality / Speed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:217
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:228
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:234 src/libslic3r/PrintConfig.cpp:879
msgid "Radius"
msgstr "Yarıçap"

#: src/slic3r/GUI/GLCanvas3D.cpp:246
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:255 src/slic3r/GUI/GLCanvas3D.cpp:4190
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:599
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:714
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1313
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1321
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1329
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1772
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2537 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:117
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2633
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:661
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3258
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3508
#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3873 src/slic3r/GUI/GLCanvas3D.cpp:4717
msgid "Switch to Settings"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3874 src/slic3r/GUI/GLCanvas3D.cpp:4717
msgid "Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3875 src/slic3r/GUI/GLCanvas3D.cpp:4718
msgid "Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3875 src/slic3r/GUI/GLCanvas3D.cpp:4718
msgid "Material Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3876 src/slic3r/GUI/GLCanvas3D.cpp:4719
msgid "Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4040
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4040
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4060
#, c-format, boost-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4060
#, c-format, boost-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4079 src/slic3r/GUI/GLCanvas3D.cpp:4735
#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Search.cpp:481
msgid "Search"
msgstr "Ara"

#: src/slic3r/GUI/GLCanvas3D.cpp:4093 src/slic3r/GUI/GLCanvas3D.cpp:4101
#: src/slic3r/GUI/Search.cpp:487
msgid "Enter a search term"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4133
msgid "Arrange options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4166
#, boost-format
msgid "Press %1%left mouse button to enter the exact value"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4168
msgid "Spacing"
msgstr "Aralık"

#: src/slic3r/GUI/GLCanvas3D.cpp:4175
msgid "Spacing from bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4182
msgid "Enable rotations (slow)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4201 src/slic3r/GUI/GLCanvas3D.cpp:4629
#: src/slic3r/GUI/KBShortcutsDialog.cpp:141 src/slic3r/GUI/Plater.cpp:7311
msgid "Arrange"
msgstr "Hizala"

#: src/slic3r/GUI/GLCanvas3D.cpp:4603
msgid "Add..."
msgstr "Ekle..."

#: src/slic3r/GUI/GLCanvas3D.cpp:4620 src/slic3r/GUI/KBShortcutsDialog.cpp:105
#: src/slic3r/GUI/Plater.cpp:6258 src/slic3r/GUI/Tab.cpp:4381
msgid "Delete all"
msgstr "Tümünü sil"

#: src/slic3r/GUI/GLCanvas3D.cpp:4629 src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4629
msgid "Click right mouse button to show arrangement options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4649
msgid "Copy"
msgstr "Kopyala"

#: src/slic3r/GUI/GLCanvas3D.cpp:4658
msgid "Paste"
msgstr "Yapıştır"

#: src/slic3r/GUI/GLCanvas3D.cpp:4670 src/slic3r/GUI/GUI_Factories.cpp:1231
#: src/slic3r/GUI/GUI_Factories.cpp:1255 src/slic3r/GUI/GUI_Factories.cpp:1266
msgid "Add instance"
msgstr "Kopyasını ekle"

#: src/slic3r/GUI/GLCanvas3D.cpp:4681 src/slic3r/GUI/GUI_Factories.cpp:1234
msgid "Remove instance"
msgstr "Kopyayı sil"

#: src/slic3r/GUI/GLCanvas3D.cpp:4694
msgid "Split to objects"
msgstr "Nesnelere böl"

#: src/slic3r/GUI/GLCanvas3D.cpp:4704
msgid "Split to parts"
msgstr "Paçalara böl"

#: src/slic3r/GUI/GLCanvas3D.cpp:4810 src/slic3r/GUI/GLCanvas3D.cpp:4847
msgid "Click right mouse button to open/close History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4832
#, boost-format
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4847 src/slic3r/GUI/KBShortcutsDialog.cpp:107
#: src/slic3r/GUI/MainFrame.cpp:1425
msgid "Redo"
msgstr "Yinele"

#: src/slic3r/GUI/GLCanvas3D.cpp:4868
#, boost-format
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6755
msgid "An object outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6756
msgid "A toolpath outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6757
msgid "SLA supports outside the print area were detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6758
msgid "Some objects are not visible during editing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6760
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6835
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6850
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:204
msgid "Planar"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:208
msgid "Auto"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:208
msgid "Manual"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:209
msgid "Plug"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:209
msgid "Dowel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:211
msgid "Prizm"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:211
msgid "Frustum"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:215
msgid "Triangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:215
msgid "Square"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:215
msgid "Hexagon"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:215
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:67
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
msgid "Circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:229
msgid "inch"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:233
msgid "Top part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:239
msgid "Bottom part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:245 src/libslic3r/PrintConfig.cpp:503
#: src/libslic3r/PrintConfig.cpp:1162 src/libslic3r/PrintConfig.cpp:2321
#: src/libslic3r/PrintConfig.cpp:2331 src/libslic3r/PrintConfig.cpp:2623
#: src/libslic3r/PrintConfig.cpp:2866 src/libslic3r/PrintConfig.cpp:2885
#: src/libslic3r/PrintConfig.cpp:2896 src/libslic3r/PrintConfig.cpp:2927
#: src/libslic3r/PrintConfig.cpp:3148 src/libslic3r/PrintConfig.cpp:3251
#: src/libslic3r/PrintConfig.cpp:3509 src/libslic3r/PrintConfig.cpp:4005
msgid "°"
msgstr "°"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:487
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:515
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1603
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1211
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1977
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:652
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:653
msgid "in"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:527
msgid "Tolerance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:845
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:848
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:849
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1256
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1259
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1260
msgid "Left click"
msgstr "Sol tık"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:845
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2233
msgid "Add connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:846
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1257
msgid "Right click"
msgstr "Sağ tık"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:846
msgid "Remove connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:847
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1258
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1261
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1262
msgid "Drag"
msgstr "Sürükle"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:847
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1195
msgid "Move connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:848
msgid "Add connector to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:849
msgid "Remove connector from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:850
msgid "Select all connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:877 src/libslic3r/PrintConfig.cpp:4697
msgid "Cut"
msgstr "Kes"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1206
msgid "Rotate cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1210
msgid "Move cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1454
msgid "Render cut plane as circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1543
msgid "Connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1547
msgid "Remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1551
msgid "Type"
msgstr "Tür"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1562 src/libslic3r/PrintConfig.cpp:2835
msgid "Style"
msgstr "Biçem"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1569
msgid "Depth ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1587
msgid "Confirm connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1612
msgid "Build size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1655
msgid "Hold SHIFT key and connect some two points of an object to cut by line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1661
msgid "Cut position: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1668
msgid "Reset cutting plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1673
msgid "Add/Edit connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1680
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1709
msgid "Upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1680
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1710
msgid "Lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1694
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:892
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
msgid "Keep"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1700
msgid "Place on cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1703
msgid "Flip"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1708
msgid "After cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1716
msgid "Perform cut"
msgstr "Kesme islemini uygula"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1806
msgid "Invalid connectors detected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1808
#, c-format, boost-format
msgid "%1$d connector is out of cut contour"
msgid_plural "%1$d connectors are out of cut contour"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1811
#, c-format, boost-format
msgid "%1$d connector is out of object"
msgid_plural "%1$d connectors are out of object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1814
msgid "Some connectors are overlapped"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1818
msgid ""
"Invalid state. \n"
"No one part is selected for keep after cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2048
msgid "Connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2078
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2204
msgid "Cut by line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2258
msgid "Delete connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:232
msgid "Entering Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:233
msgid "Leaving Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:234
msgid "Cut gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:595
msgid "Emboss"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:858
msgid "ERROR: Wait until ends or Cancel process."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:912
msgid "Text-Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:944
msgid "Font"
msgstr "Yazı türü"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:945
#: src/libslic3r/PrintConfig.cpp:868
msgid "Height"
msgstr "Yükseklik"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:946
msgid "Depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:954
msgid "Use surface"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:955
msgid "Char gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:956
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1574
msgid "Line gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:957
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1572
msgid "Boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:958
msgid "Skew ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:959
msgid "Z-move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:960
msgid "Z-rot"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:961
msgid "Collection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1030
msgid "NORMAL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1031
msgid "SMALL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1032
msgid "ITALIC"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1033
msgid "SWISS"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1034
msgid "MODERN"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1062
msgid "First font"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1067
msgid "Default font"
msgstr "Varsayılan yazı türü"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1072
msgid "Embossed text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1434
msgid "Warning: No font is selected. Select correct one."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1452
msgid "advanced"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1516
msgid "Fix settings possition"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1517
msgid "Allow floating window near text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1552
msgid "Can't write text by selected font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1553
msgid "Try to choose another font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1566
msgid "Empty"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1566
msgid "Embossed text can NOT contain only white spaces."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1568
msgid "Bad symbol"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1568
msgid "Text contain character glyph (represented by '?') unknown by font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1571
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:523
msgid "Skew"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1571
msgid "Unsupported visualization of font skew for text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1572
msgid "Unsupported visualization of font boldness for text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1574
msgid "Unsupported visualization of gap between lines inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1578
msgid "To tall"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1578
msgid "Diminished font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1580
msgid "To small"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1580
msgid "Enlarged font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1581
#, boost-format
msgid "%1% is NOT shown."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1885
msgid " No symbol"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1886
msgid " ... Loading"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1936
msgid " ... In queue"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2053
#, boost-format
msgid "Font face \"%1%\" can't be selected."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2101
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:754
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:367
msgid "Apply"
msgstr "Uygula"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2113
msgid "add file with font(.ttf, .ttc)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2123
msgid "Open dialog for choose from fonts."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2131
msgid "Text is to object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2145
msgid "Added"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2148
msgid "Click to change text into object part."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2151
#: src/slic3r/GUI/GUI_ObjectList.cpp:4315
msgid "You can't change a type of the last solid part of the object."
msgstr "Nesnenin son katı kısmının türünü değiştiremezsiniz."

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2152
msgid "Subtracted"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2158
msgid "Click to change part type into negative volume."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2164
#: src/slic3r/GUI/GUI_ObjectList.cpp:4332
msgid "Modifier"
msgstr "Niteleyici"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2170
msgid "Click to change part type into modifier."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2177
msgid "Change Text Type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2208
#, boost-format
msgid "Rename style(%1%) for embossing text: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2220
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2305
msgid "Name can't be empty."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2222
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2307
msgid "Name has to be unique."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2231
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2318
msgid "ok"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2233
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2322
msgid "cancel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2258
msgid "Rename style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2265
msgid "Rename actual style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2266
msgid "Can't rename temporary style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2283
msgid "First Add style to list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2285
#, boost-format
msgid "Save %1% style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2287
msgid "No changes to save."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2294
msgid "New name of style: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2343
msgid "Save as new style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2355
msgid "Only valid font can be added to style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2357
msgid "Add style to my list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2359
msgid "Add as new named style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2375
msgid "Remove style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2406
#, boost-format
msgid "Delete \"%1%\" style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2407
#, boost-format
msgid "Can't delete \"%1%\". It is last style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2408
#, boost-format
msgid "Can't delete temporary style \"%1%\"."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2415
#, boost-format
msgid ""
"Are you sure,\n"
"that you want permanently and unrecoverable \n"
"remove style \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2417
msgid "Yes"
msgstr "Evet"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2426
msgid "No"
msgstr "Hayır"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2476
msgid "Presets"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2485 src/slic3r/GUI/GUI_App.cpp:2312
msgid "modified"
msgstr "değiştirilmiş"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2538
#, boost-format
msgid "Modified style \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2539
#, boost-format
msgid "Current style is \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2546
msgid "Style modification will be lost."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2548
#, boost-format
msgid ""
"Changing style to '%1%' will discard current style modification.\n"
"\n"
" Would you like to continue anyway?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2564
msgid "Not valid style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2565
#, boost-format
msgid "Style '%1%' can't be used and will be removed from list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2612
msgid "Unset italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2629
msgid "Set italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2659
msgid "Unset bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2677
msgid "Set bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2843
msgid "WxFont is not loaded properly."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2878
msgid "Revert font changes."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2912
msgid "wx Make bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2923
msgid "Revert text size."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2950
msgid "Revert embossed depth."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3099
msgid ""
"Advanced font options could be change only for corect font.\n"
"Start with select correct font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3139
msgid "Revert using of model surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3152
msgid "font points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3161
msgid "Revert gap between letters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3162
msgid "Distance between letters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3177
msgid "Revert gap between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3178
msgid "Distance between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3192
msgid "Undo boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3193
msgid "Tiny / Wide glyphs"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3203
msgid "Undo letter's skew"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3204
msgid "Italic strength ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3224
msgid "Undo translation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3225
msgid "Distance center of text from model surface"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3270
msgid "Undo rotation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3272
msgid "Rotate text Clock-wise."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3306
msgid "Select from True Type Collection."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3315
msgid "Set text to face camera"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3322
msgid "Use camera direction for text orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3405
#, boost-format
msgid "Font '%1%' can't be used. Please select another."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3407
msgid "Selected font is NOT True-type."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3431
msgid "Choose one or more files (TTF, TTC):"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3458
msgid "Choose SVG file:"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3519
#, boost-format
msgid ""
"Can't load exactly same font(\"%1%\"), Aplication select similar one(\"%2%"
"\"). You have to specify font for enable edit text."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:81
msgid "Enter emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:82
msgid "Leave emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:83
msgid "Embossing actions"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:37
#: src/slic3r/GUI/ObjectDataViewModel.cpp:66
msgid "Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
msgid "Automatic painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "painting..."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Clipping of view"
msgstr "Görünüm kırpma"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
msgid "Reset direction"
msgstr "Yönü sıfırla"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
msgid "Brush shape"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1816
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
msgid "Enforce supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Right mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:566
msgid "Block supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Shift + Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:561
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:247
msgid "Remove selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Remove all selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Sphere"
msgstr "Küre"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:106
#: src/libslic3r/PrintConfig.cpp:1232
msgid "Triangles"
msgstr "Üçgenler"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
msgid "Highlight overhang by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63
msgid "Enforce"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
msgid "Tool type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
msgid "Brush"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
msgid "Smart fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Smart fill angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:72
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Split triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:73
msgid "On overhangs only"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:187
#, boost-format
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:230
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:371
msgid "Paints facets according to the chosen painting brush."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:238
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:384
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242
#, boost-format
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:257
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:412
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
msgid "Paints all facets inside, regardless of their orientation."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:266
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:421
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149
msgid "Ignores facets facing away from the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:275
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:430
msgid "Paints only one facet."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:283
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:298
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:438
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:455
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:129
msgid "Alt + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:288
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:321
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:476
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:167
msgid "Ctrl + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:326
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:481
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:172
msgid "Reset selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:382
msgid "Block supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:383
msgid "Add supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:528
msgid "Automatic painting will erase all currently painted areas."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:529
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1114
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:533
msgid "Automatic painting support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:564
msgid "Add supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:22
msgid "Entering Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:23
msgid "Leaving Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:24
msgid "Paint-on supports editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:87
msgid "Place on face"
msgstr "Yüzeye yerleştir"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:29
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
#: src/libslic3r/PrintConfig.cpp:4091
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:242
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:361
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:655
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:739
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:827
msgid "Hollow and drill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:869
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:64
msgid "No feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:65
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:76
msgid "Vertex"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:66
msgid "Edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:68
msgid "Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77
msgid "Point on edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:78
msgid "Point on circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:79
msgid "Point on plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:89
msgid "Center of edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:90
msgid "Center of circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:554
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2029
msgid "Measure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1236
msgid "Edit to scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1258
#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:161
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:236
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:765
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:783
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:806
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:820
#: src/libslic3r/PrintConfig.cpp:4766
msgid "Scale"
msgstr "Ölçek"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1362
msgctxt "Verb"
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1541
msgid "##angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1740
msgid "Measure tool debug"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1824
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1851
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1857
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1886
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1893
msgid "Unselect feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1830
msgid "Unselect center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1835
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1862
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1898
msgid "Select center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1840
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1867
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1903
msgid "Unselect point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1846
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1873
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1878
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1910
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1915
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1923
msgid "Select feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1878
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1915
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1923
msgid "Select point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1940
msgid "Shift"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1940
msgid "Enable point selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1945
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2007
msgid "Restart selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1952
msgid "Esc"
msgstr "Esc"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1955
msgid "Unselect"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1999
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2001
msgid "Selection"
msgstr "Seçim"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2021
#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Copy to clipboard"
msgstr "Panoya kopyala"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2038
msgid "Angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2052
msgid "Perpendicular distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2052
msgid "Distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2062
msgid "Direct distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2072
msgid "Distance XYZ"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:163
msgid "Entering Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:164
msgid "Leaving Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:165
msgid "Measure gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:28
#, boost-format
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46
#: src/slic3r/GUI/ObjectDataViewModel.cpp:69
msgid "Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
msgid "First color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
msgid "Second color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:642
msgid "Remove painted color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "Clear all"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
msgid "Bucket fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:397
msgid "Paints neighboring facets that have the same color."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:443
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:645
#, boost-format
msgid "Painted using: Extruder %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:118
msgid "Entering Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:119
msgid "Leaving Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:120
msgid "Multimaterial painting editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:76
msgid "Move"
msgstr "Taşı"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:643
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:733
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:764
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:802
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:819
#: src/libslic3r/PrintConfig.cpp:4751
msgid "Rotate"
msgstr "Çevir"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:707
msgid "Optimize orientation"
msgstr "Yönlendirmeyi optimize et"

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:194
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250
msgid "Enforce seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:252
msgid "Block seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
msgid "Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:23
msgid "Entering Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:24
msgid "Leaving Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:25
msgid "Paint-on seam editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:105
msgid "Mesh name"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:107
msgid "Detail level"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:108
msgid "Decimate ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:147
#, boost-format
msgid ""
"Processing model '%1%' with more than 1M triangles could be slow. It is "
"highly recommended to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:150
#: src/slic3r/GUI/GUI_Factories.cpp:789
msgid "Simplify model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:177
msgid "Simplify"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:190
msgid "Simplification is currently only allowed when a single part is selected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:191
#: src/slic3r/GUI/MainFrame.cpp:1245 src/slic3r/GUI/MainFrame.cpp:1712
#: src/slic3r/GUI/PrintHostDialogs.cpp:424
msgid "Error"
msgstr "Hata"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:294
msgid "Extra high"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295
msgid "High"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:296
msgid "Medium"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297
msgid "Low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:298
msgid "Extra low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322
#, boost-format
msgid ""
"Multipart object can be simplified only by %1%. If you want specify %2% "
"process it separately."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:352
#, c-format, boost-format
msgid "%d triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:355
msgid "Show wireframe"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:361
msgid "Operation already cancelling. Please wait few seconds."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:370
msgid "Can't apply when proccess preview."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:377
#, boost-format
msgid "Process %1% / 100"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:542
msgid "Simplify "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:67
msgid "Entering SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:68
msgid "Leaving SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:35
msgid "Head diameter"
msgstr "Başlık çapı"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:36
msgid "Lock supports under new islands"
msgstr "Yeni adalardaki destekleri kilitle"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:37
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1264
msgid "Remove selected points"
msgstr "Seçilen noktaları kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:38
msgid "Remove all points"
msgstr "Tüm noktaları kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
msgid "Apply changes"
msgstr "Değişiklikleri uygula"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
msgid "Discard changes"
msgstr "Değişiklikleri iptal et"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
msgid "Minimal points distance"
msgstr "En düşük nokta mesafesi"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
#: src/libslic3r/PrintConfig.cpp:3921
msgid "Support points density"
msgstr "Destek noktaları yoğunluğu"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
msgid "Auto-generate points"
msgstr "Noktaları otomatik oluştur"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
msgid "Manual editing"
msgstr "Manuel düzenleme"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:303
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:456
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:622
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:692
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:802
msgid "SLA Support Points"
msgstr "SLA Destek Noktaları"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:810
msgid "Do you want to save your manually edited support points?"
msgstr "El ile düzenlenen destek noktalarınızı kaydetmek ister misiniz?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:811
msgid "Save support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:876
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:983
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1113
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1120
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1227
msgid "SLA gizmo keyboard shortcuts"
msgstr "SLA gizmo klavye kısayolları"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1238
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr "Not: Bazı kısayollar yalnızca düzenleme modunda çalışır."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1256
msgid "Add point"
msgstr "Nokta ekle"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1257
msgid "Remove point"
msgstr "Noktayı kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1258
msgid "Move point"
msgstr "Hareket noktası"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1259
msgid "Add point to selection"
msgstr "Seçime nokta ekle"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1260
msgid "Remove point from selection"
msgstr "Seçimden noktayı kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1261
msgid "Select by rectangle"
msgstr "Dikdörtgene göre seç"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1262
msgid "Deselect by rectangle"
msgstr "Dikdörtgene göre seçimi kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1263
msgid "Select all points"
msgstr "Tüm noktaları seç"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
msgid "Mouse wheel"
msgstr "Fare tekerleği"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
msgid "Move clipping plane"
msgstr "Kırpma düzlemini taşı"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
msgid "Reset clipping plane"
msgstr "Kırpma düzlemini sıfırla"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
msgid "Switch to editing mode"
msgstr "Düzenleme moduna geç"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:204
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:997
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:306
msgid "Undefined"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:331
#, boost-format
msgid "%1% was substituted with %2%"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:340
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:341
msgid "The following values were substituted:"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:342
msgid "Review the substitutions and adjust them if needed."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:352 src/slic3r/GUI/Plater.cpp:847
msgid "SLA print settings"
msgstr "SLA yazdırma ayarları"

#: src/slic3r/GUI/GUI.cpp:356 src/slic3r/GUI/PhysicalPrinterDialog.cpp:158
msgid "Physical Printer"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:369
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:379
#, boost-format
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:275
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:276
msgid "Developed by Prusa Research."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:278
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:279
msgid "Artwork model by Creative Tools"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:420
#, boost-format
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:428
#, c-format, boost-format
msgid "%s - BREAKING CHANGE"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:430
msgid "Quit, I will move my data now"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:430
msgid "Start the application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:723
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:726
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:730
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:733
msgid "Critical error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:738
#, boost-format
msgid "Internal error: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:962 src/slic3r/GUI/GUI_App.cpp:1060
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:968 src/slic3r/GUI/GUI_App.cpp:1066
msgid ""
"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1015
#, boost-format
msgid "You are opening %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1018
#, boost-format
msgid ""
"The active configuration was created by <b>%1% %2%</b>,\n"
"while a newer configuration was found in <b>%3%</b>\n"
"created by <b>%1% %4%</b>.\n"
"\n"
"Shall the newer configuration be imported?\n"
"If so, your active configuration will be backed up before importing the new "
"configuration."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1026
#, boost-format
msgid ""
"An existing configuration was found in <b>%3%</b>\n"
"created by <b>%1% %2%</b>.\n"
"\n"
"Shall this configuration be imported?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1034
msgid "Import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1035
msgid "Don't import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1043
msgid "Continue and import newer configuration?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1104
msgid ""
"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
"available in the system.\n"
"Please download and install a 64 bit build of PrusaSlicer from https://www."
"prusa3d.cz/prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1187
#, c-format, boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1189 src/slic3r/GUI/GUI_App.cpp:3259
#: src/slic3r/GUI/Plater.cpp:1733 src/slic3r/GUI/UnsavedChangesDialog.cpp:917
msgid "Remember my choice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1231
msgid "Loading configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1262
#, boost-format
msgid "New prerelease version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1263
msgid "See Releases page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1318
msgid "Preparing settings tabs"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1395 src/slic3r/GUI/Preferences.cpp:408
msgid "Restore window position on start"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1397
msgid "PrusaSlicer started after a crash"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1398
#, boost-format
msgid ""
"PrusaSlicer crashed last time when attempting to set window position.\n"
"We are sorry for the inconvenience, it unfortunately happens with certain "
"multiple-monitor setups.\n"
"More precise reason for the crash: \"%1%\".\n"
"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
"\n"
"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
"Otherwise, the application will most likely crash again next time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1410
#, boost-format
msgid "Disable \"%1%\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1411
#, boost-format
msgid "Leave \"%1%\" enabled"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1786
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1790
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1792
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1796 src/slic3r/GUI/PhysicalPrinterDialog.cpp:796
msgid "Information"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1809 src/slic3r/GUI/GUI_App.cpp:1820
msgid "Recreating"
msgstr "Yeniden oluşturma"

#: src/slic3r/GUI/GUI_App.cpp:1823
msgid "Loading of current presets"
msgstr "Geçerli hazır ayarlar yükleniyor"

#: src/slic3r/GUI/GUI_App.cpp:1828
msgid "Loading of a mode view"
msgstr "Mod görünümü yükleniyor"

#: src/slic3r/GUI/GUI_App.cpp:1967
msgid "Choose one file (3MF/AMF):"
msgstr "Bir dosya seçin (3MF/AMF):"

#: src/slic3r/GUI/GUI_App.cpp:1979
msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
msgstr ""
"Bir veya daha fazla dosya seçin (STL / OBJ / AMF / 3MF / PRUSA / STEP):"

#: src/slic3r/GUI/GUI_App.cpp:1991
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2002
msgid "Changing of an application language"
msgstr "Bir uygulama dilinin değiştirilmesi"

#: src/slic3r/GUI/GUI_App.cpp:2143
msgid "Select the language"
msgstr "Dil seçiniz"

#: src/slic3r/GUI/GUI_App.cpp:2143
msgid "Language"
msgstr "Dil"

#: src/slic3r/GUI/GUI_App.cpp:2351
msgid ""
"Simple mode supports manipulation with single-part object(s)\n"
"or object(s) with support modifiers only."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2353
msgid "Please check your object list before mode changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2354
msgid "Change application mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2386
#, c-format, boost-format
msgid "Run %s"
msgstr "%s başlat"

#: src/slic3r/GUI/GUI_App.cpp:2390
msgid "&Configuration Snapshots"
msgstr "&Yapılandırma Anlık Görüntüleri"

#: src/slic3r/GUI/GUI_App.cpp:2390
msgid "Inspect / activate configuration snapshots"
msgstr "Yapılandırma anlık görüntülerini inceleme/etkinleştirme"

#: src/slic3r/GUI/GUI_App.cpp:2391
msgid "Take Configuration &Snapshot"
msgstr "Yapılandırma &Anlık Görüntüsü Al"

#: src/slic3r/GUI/GUI_App.cpp:2391
msgid "Capture a configuration snapshot"
msgstr "Yapılandırma anlık görüntüsünü kaydet"

#: src/slic3r/GUI/GUI_App.cpp:2392
msgid "Check for Configuration Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2392
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2393
msgid "Check for Application Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2393
msgid "Check for new version of application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2400
msgid "&Preferences"
msgstr "&Tercihler"

#: src/slic3r/GUI/GUI_App.cpp:2406
msgid "Application preferences"
msgstr "Uygulama tercihleri"

#: src/slic3r/GUI/GUI_App.cpp:2411
msgid "Simple View Mode"
msgstr "Basit görünüm modu"

#: src/slic3r/GUI/GUI_App.cpp:2413
msgid "Advanced View Mode"
msgstr "Gelişmiş Görünüm Modu"

#: src/slic3r/GUI/GUI_App.cpp:2414
msgid "Expert View Mode"
msgstr "Uzman Modu"

#: src/slic3r/GUI/GUI_App.cpp:2419
msgid "Mode"
msgstr "Mod"

#: src/slic3r/GUI/GUI_App.cpp:2419
#, c-format, boost-format
msgid "%s View Mode"
msgstr "%s Görüntüleme Modu"

#: src/slic3r/GUI/GUI_App.cpp:2422
msgid "&Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2425
msgid "Flash Printer &Firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2425
msgid "Upload a firmware image into an Arduino based printer"
msgstr "Arduino tabanlı bir yazıcıya yazılım yükle"

#: src/slic3r/GUI/GUI_App.cpp:2448
msgid "Taking a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2449
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2450
msgid "Snapshot name"
msgstr "Anlık görüntü adı"

#: src/slic3r/GUI/GUI_App.cpp:2466
msgid "Loading a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2475
#, boost-format
msgid "Continue to activate a configuration snapshot %1%?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2489
msgid "Failed to activate configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2509
msgid "Language selection"
msgstr "Dil seçimi"

#: src/slic3r/GUI/GUI_App.cpp:2512
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""
"Dilin değiştirilmesi uygulamanın yeniden başlatılmasını tetikler.\n"
"Tabla içeriğini kaybedeceksiniz."

#: src/slic3r/GUI/GUI_App.cpp:2514 src/slic3r/GUI/Preferences.cpp:732
#: src/slic3r/GUI/Selection.cpp:1721
msgid "Do you want to proceed?"
msgstr "Devam etmek istiyor musunuz?"

#: src/slic3r/GUI/GUI_App.cpp:2541
msgid "&Configuration"
msgstr "&Ayarlar"

#: src/slic3r/GUI/GUI_App.cpp:2549
msgid "Restart application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2715
msgid "For new project all modifications will be reseted"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2753
msgid "Loading a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2756
msgid "Project is loading"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2756
msgid "Opening new project while some presets are unsaved."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2775
msgid "The uploads are still ongoing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2775
msgid "Stop them and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2779
msgid "Ongoing uploads"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3014
msgid ""
"It's impossible to print object(s) which contains parameter modifiers with "
"SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3015 src/slic3r/GUI/Jobs/SLAImportJob.cpp:149
#: src/slic3r/GUI/Plater.cpp:2533
msgid "Please check your object list before preset changing."
msgstr ""
"Lütfen önceden ayarlanmış değişiklik yapmadan önce nesne listenizi kontrol "
"edin."

#: src/slic3r/GUI/GUI_App.cpp:3058
msgid "Configuration is editing from ConfigWizard"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3083
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3258 src/slic3r/GUI/GUI_App.cpp:3281
msgid "Open hyperlink in default browser?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3258 src/slic3r/GUI/GUI_App.cpp:3281
msgid "PrusaSlicer: Open hyperlink"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3263 src/slic3r/GUI/Preferences.cpp:596
msgid "Suppress to open hyperlink in browser"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3265 src/slic3r/GUI/Plater.cpp:1739
msgid "PrusaSlicer will remember your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3266
msgid "You will not be asked about it again on hyperlinks hovering."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3267 src/slic3r/GUI/Plater.cpp:1743
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to changes your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3269 src/slic3r/GUI/Plater.cpp:1745
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:934
msgid "PrusaSlicer: Don't ask me again"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3344
msgid "Check for application update has failed."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3345
#, boost-format
msgid "No new version is available. Latest release version is %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3416
msgid "Download of new version is already ongoing. Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:65 src/slic3r/GUI/GUI_Init.cpp:68
msgid "PrusaSlicer GUI initialization failed"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:68
#, boost-format
msgid "Fatal error, exception catched: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
#: src/libslic3r/PrintConfig.cpp:304 src/libslic3r/PrintConfig.cpp:428
#: src/libslic3r/PrintConfig.cpp:471 src/libslic3r/PrintConfig.cpp:480
#: src/libslic3r/PrintConfig.cpp:766 src/libslic3r/PrintConfig.cpp:830
#: src/libslic3r/PrintConfig.cpp:838 src/libslic3r/PrintConfig.cpp:847
#: src/libslic3r/PrintConfig.cpp:1292 src/libslic3r/PrintConfig.cpp:1379
#: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1996
#: src/libslic3r/PrintConfig.cpp:2063 src/libslic3r/PrintConfig.cpp:2297
#: src/libslic3r/PrintConfig.cpp:2957 src/libslic3r/PrintConfig.cpp:2965
#: src/libslic3r/PrintConfig.cpp:3025 src/libslic3r/PrintConfig.cpp:3034
#: src/libslic3r/PrintConfig.cpp:3205
msgid "Layers and Perimeters"
msgstr "Katmanlar ve Duvarlar"

#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
#: src/slic3r/GUI/Tab.cpp:1495 src/slic3r/GUI/Tab.cpp:1497
#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:2128
#: src/libslic3r/PrintConfig.cpp:2137 src/libslic3r/PrintConfig.cpp:2146
#: src/libslic3r/PrintConfig.cpp:2156 src/libslic3r/PrintConfig.cpp:2165
#: src/libslic3r/PrintConfig.cpp:2594 src/libslic3r/PrintConfig.cpp:2600
#: src/libslic3r/PrintConfig.cpp:2608 src/libslic3r/PrintConfig.cpp:2621
#: src/libslic3r/PrintConfig.cpp:2631 src/libslic3r/PrintConfig.cpp:2639
#: src/libslic3r/PrintConfig.cpp:2657 src/libslic3r/PrintConfig.cpp:2674
#: src/libslic3r/PrintConfig.cpp:2695 src/libslic3r/PrintConfig.cpp:2708
#: src/libslic3r/PrintConfig.cpp:2725 src/libslic3r/PrintConfig.cpp:2743
#: src/libslic3r/PrintConfig.cpp:2758 src/libslic3r/PrintConfig.cpp:2768
#: src/libslic3r/PrintConfig.cpp:2777 src/libslic3r/PrintConfig.cpp:2788
#: src/libslic3r/PrintConfig.cpp:2802 src/libslic3r/PrintConfig.cpp:2818
#: src/libslic3r/PrintConfig.cpp:2826 src/libslic3r/PrintConfig.cpp:2827
#: src/libslic3r/PrintConfig.cpp:2836 src/libslic3r/PrintConfig.cpp:2851
#: src/libslic3r/PrintConfig.cpp:2860 src/libslic3r/PrintConfig.cpp:2874
#: src/libslic3r/PrintConfig.cpp:2882 src/libslic3r/PrintConfig.cpp:2893
#: src/libslic3r/PrintConfig.cpp:2904 src/libslic3r/PrintConfig.cpp:2913
#: src/libslic3r/PrintConfig.cpp:2923 src/libslic3r/PrintConfig.cpp:2935
msgid "Support material"
msgstr "Destek"

#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
#: src/libslic3r/PrintConfig.cpp:3161 src/libslic3r/PrintConfig.cpp:3169
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:65
msgid "Pad and Support"
msgstr "Ped ve Destek"

#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/Tab.cpp:1461
#: src/libslic3r/PrintConfig.cpp:1620 src/libslic3r/PrintConfig.cpp:1626
#: src/libslic3r/PrintConfig.cpp:1640 src/libslic3r/PrintConfig.cpp:1650
#: src/libslic3r/PrintConfig.cpp:1658 src/libslic3r/PrintConfig.cpp:1660
msgid "Ironing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1343
#: src/libslic3r/PrintConfig.cpp:1344 src/libslic3r/PrintConfig.cpp:1359
#: src/libslic3r/PrintConfig.cpp:1369
msgid "Fuzzy Skin"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/Tab.cpp:1537
#: src/libslic3r/PrintConfig.cpp:531 src/libslic3r/PrintConfig.cpp:541
#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:563
#: src/libslic3r/PrintConfig.cpp:818 src/libslic3r/PrintConfig.cpp:1386
#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:1659
#: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/PrintConfig.cpp:2391
#: src/libslic3r/PrintConfig.cpp:2444 src/libslic3r/PrintConfig.cpp:3010
msgid "Speed"
msgstr "Hız"

#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1590
#: src/slic3r/GUI/Tab.cpp:2286 src/libslic3r/PrintConfig.cpp:856
#: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2030
#: src/libslic3r/PrintConfig.cpp:2412 src/libslic3r/PrintConfig.cpp:2687
#: src/libslic3r/PrintConfig.cpp:2715
msgid "Extruders"
msgstr "Ekstrüder sayısı"

#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:806
#: src/libslic3r/PrintConfig.cpp:924 src/libslic3r/PrintConfig.cpp:1278
#: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:2039
#: src/libslic3r/PrintConfig.cpp:2432 src/libslic3r/PrintConfig.cpp:2696
#: src/libslic3r/PrintConfig.cpp:2997
msgid "Extrusion Width"
msgstr "Ekstrüzyon genişliği"

#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1481
#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:586
#: src/libslic3r/PrintConfig.cpp:602
msgid "Skirt and brim"
msgstr "Etek ve kenar"

#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1438
#: src/slic3r/GUI/Tab.cpp:1473 src/slic3r/GUI/Tab.cpp:1612
#: src/slic3r/GUI/Tab.cpp:1616 src/slic3r/GUI/Tab.cpp:2004
#: src/slic3r/GUI/Tab.cpp:2388 src/slic3r/GUI/Tab.cpp:4983
#: src/libslic3r/PrintConfig.cpp:277 src/libslic3r/PrintConfig.cpp:519
#: src/libslic3r/PrintConfig.cpp:1479 src/libslic3r/PrintConfig.cpp:1566
#: src/libslic3r/PrintConfig.cpp:1613 src/libslic3r/PrintConfig.cpp:2570
#: src/libslic3r/PrintConfig.cpp:2580 src/libslic3r/PrintConfig.cpp:3185
#: src/libslic3r/PrintConfig.cpp:3220 src/libslic3r/PrintConfig.cpp:3231
#: src/libslic3r/PrintConfig.cpp:3246 src/libslic3r/PrintConfig.cpp:3259
#: src/libslic3r/PrintConfig.cpp:3268 src/libslic3r/PrintConfig.cpp:3280
#: src/libslic3r/PrintConfig.cpp:3690
msgid "Advanced"
msgstr "Gelişmiş"

#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:434
#: src/slic3r/GUI/Tab.cpp:4944 src/slic3r/GUI/Tab.cpp:4946
#: src/libslic3r/PrintConfig.cpp:3351 src/libslic3r/PrintConfig.cpp:3360
#: src/libslic3r/PrintConfig.cpp:3369 src/libslic3r/PrintConfig.cpp:3379
#: src/libslic3r/PrintConfig.cpp:3389 src/libslic3r/PrintConfig.cpp:3418
#: src/libslic3r/PrintConfig.cpp:3449 src/libslic3r/PrintConfig.cpp:3456
#: src/libslic3r/PrintConfig.cpp:3475 src/libslic3r/PrintConfig.cpp:3485
#: src/libslic3r/PrintConfig.cpp:3494 src/libslic3r/PrintConfig.cpp:3507
#: src/libslic3r/PrintConfig.cpp:3517 src/libslic3r/PrintConfig.cpp:3535
#: src/libslic3r/PrintConfig.cpp:3545 src/libslic3r/PrintConfig.cpp:3893
#: src/libslic3r/PrintConfig.cpp:3915 src/libslic3r/PrintConfig.cpp:3922
#: src/libslic3r/PrintConfig.cpp:3930
msgid "Supports"
msgstr "Destekler"

#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:588
#: src/slic3r/GUI/Tab.cpp:4958 src/slic3r/GUI/Tab.cpp:4959
#: src/slic3r/GUI/Tab.cpp:5024 src/libslic3r/PrintConfig.cpp:3938
#: src/libslic3r/PrintConfig.cpp:3945 src/libslic3r/PrintConfig.cpp:3959
#: src/libslic3r/PrintConfig.cpp:3970 src/libslic3r/PrintConfig.cpp:3980
#: src/libslic3r/PrintConfig.cpp:4002 src/libslic3r/PrintConfig.cpp:4013
#: src/libslic3r/PrintConfig.cpp:4020 src/libslic3r/PrintConfig.cpp:4027
#: src/libslic3r/PrintConfig.cpp:4038 src/libslic3r/PrintConfig.cpp:4047
#: src/libslic3r/PrintConfig.cpp:4056
msgid "Pad"
msgstr "Altlık"

#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4976
#: src/slic3r/GUI/Tab.cpp:4977 src/libslic3r/SLA/Hollowing.cpp:86
#: src/libslic3r/SLA/Hollowing.cpp:91 src/libslic3r/SLA/Hollowing.cpp:106
#: src/libslic3r/SLA/Hollowing.cpp:115 src/libslic3r/PrintConfig.cpp:4066
#: src/libslic3r/PrintConfig.cpp:4073 src/libslic3r/PrintConfig.cpp:4083
#: src/libslic3r/PrintConfig.cpp:4092
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:159
msgid "Add part"
msgstr "Bölüm ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Add negative volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:161
msgid "Add modifier"
msgstr "Niteleyici ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:162
msgid "Add support blocker"
msgstr "Destek engelleyici ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Add support enforcer"
msgstr "Destek uygulayıcısı ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:169
msgid "Add text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:170
msgid "Add negative text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:171
msgid "Add text modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:307
msgid "Select showing settings"
msgstr "Gösterme ayarlarını seç"

#: src/slic3r/GUI/GUI_Factories.cpp:414 src/slic3r/GUI/GUI_Factories.cpp:419
#: src/slic3r/GUI/GUI_Factories.cpp:625 src/slic3r/GUI/GUI_Factories.cpp:631
#, c-format, boost-format
msgid "Quick Add Settings (%s)"
msgstr "Hızlı Ekleme Ayarları ( %s )"

#: src/slic3r/GUI/GUI_Factories.cpp:460
msgid "Remove the selected object"
msgstr "Seçilen nesneyi kaldır"

#: src/slic3r/GUI/GUI_Factories.cpp:475
msgid "Load"
msgstr "Yükle"

#: src/slic3r/GUI/GUI_Factories.cpp:481 src/slic3r/GUI/GUI_Factories.cpp:566
#: src/slic3r/GUI/GUI_Factories.cpp:570
msgid "Box"
msgstr "Kutu"

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Cylinder"
msgstr "Silindir"

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Slab"
msgstr "Levha"

#: src/slic3r/GUI/GUI_Factories.cpp:493
msgid "Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:529 src/slic3r/GUI/GUI_Factories.cpp:549
#: src/slic3r/GUI/GUI_ObjectList.cpp:660
msgid "Text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:555 src/slic3r/GUI/GUI_Factories.cpp:558
#: src/slic3r/GUI/GUI_Factories.cpp:595
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:604
msgid "Add settings"
msgstr "Ekleme ayarları"

#: src/slic3r/GUI/GUI_Factories.cpp:695
msgid "Change type"
msgstr "Türünü değiştir"

#: src/slic3r/GUI/GUI_Factories.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Object"
msgstr "Ayrılmış Nesne Olarak Ayarla"

#: src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Objects"
msgstr "Ayrılmış Nesneler Olarak Ayarla"

#: src/slic3r/GUI/GUI_Factories.cpp:727
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:755 src/slic3r/GUI/GUI_ObjectList.cpp:2072
#: src/slic3r/GUI/GUI_ObjectList.cpp:2576
msgid "Invalidate cut info"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:770
msgid "Rename"
msgstr "Adını değiştirmek"

#: src/slic3r/GUI/GUI_Factories.cpp:780
msgid "Fix through the Netfabb"
msgstr "Netfabb ile düzelt"

#: src/slic3r/GUI/GUI_Factories.cpp:799
msgid "Export as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:810
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:817 src/slic3r/GUI/Plater.cpp:3626
msgid "Replace with STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:817
msgid "Replace the selected volume with new STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:824
msgid "Set extruder for selected items"
msgstr "Seçilen ürünler için ekstrüder seti"

#: src/slic3r/GUI/GUI_Factories.cpp:862 src/slic3r/Utils/Repetier.cpp:145
#: src/slic3r/Utils/Repetier.cpp:226 src/libslic3r/PrintConfig.cpp:693
#: src/libslic3r/PrintConfig.cpp:2810 src/libslic3r/PrintConfig.cpp:3904
msgid "Default"
msgstr "Varsayılan"

#: src/slic3r/GUI/GUI_Factories.cpp:879
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:879
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:921 src/slic3r/GUI/Plater.cpp:6407
msgid "Convert from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:922 src/slic3r/GUI/Plater.cpp:6408
msgid "Revert conversion from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:923 src/slic3r/GUI/Plater.cpp:6409
msgid "Convert from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:924 src/slic3r/GUI/Plater.cpp:6409
msgid "Revert conversion from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:945 src/slic3r/GUI/GUI_ObjectList.cpp:2284
#: src/libslic3r/PrintConfig.cpp:4742
msgid "Merge"
msgstr "Birleştir"

#: src/slic3r/GUI/GUI_Factories.cpp:945
msgid "Merge objects to the one multipart object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:964
msgid "Along X axis"
msgstr "X ekseni boyunca"

#: src/slic3r/GUI/GUI_Factories.cpp:964
msgid "Mirror the selected object along the X axis"
msgstr "Seçilen nesneyi X ekseni boyunca yansıt"

#: src/slic3r/GUI/GUI_Factories.cpp:966
msgid "Along Y axis"
msgstr "Y ekseni boyunca"

#: src/slic3r/GUI/GUI_Factories.cpp:966
msgid "Mirror the selected object along the Y axis"
msgstr "Seçilen nesneyi Y ekseni boyunca aynala"

#: src/slic3r/GUI/GUI_Factories.cpp:968
msgid "Along Z axis"
msgstr "Z ekseni boyunca"

#: src/slic3r/GUI/GUI_Factories.cpp:968
msgid "Mirror the selected object along the Z axis"
msgstr "Seçilen nesneyi Z ekseni boyunca aynalayın"

#: src/slic3r/GUI/GUI_Factories.cpp:971
msgid "Mirror"
msgstr "Ayna"

#: src/slic3r/GUI/GUI_Factories.cpp:971
msgid "Mirror the selected object"
msgstr "Seçilen nesneyi yansıtma"

#: src/slic3r/GUI/GUI_Factories.cpp:977
msgid "Edit text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:999
msgid "Ability to change text, font, size, ..."
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1021 src/slic3r/GUI/GUI_ObjectList.cpp:1793
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1059
msgid "To objects"
msgstr "Nesnelere"

#: src/slic3r/GUI/GUI_Factories.cpp:1059
msgid "Split the selected object into individual objects"
msgstr "Seçilen nesneyi ayrı nesnelere bölme"

#: src/slic3r/GUI/GUI_Factories.cpp:1062
msgid "To parts"
msgstr "Parçalara"

#: src/slic3r/GUI/GUI_Factories.cpp:1062 src/slic3r/GUI/GUI_Factories.cpp:1097
msgid "Split the selected object into individual parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1066 src/slic3r/GUI/GUI_Factories.cpp:1097
#: src/libslic3r/PrintConfig.cpp:4771
msgid "Split"
msgstr "Bölünmüş"

#: src/slic3r/GUI/GUI_Factories.cpp:1066
msgid "Split the selected object"
msgstr "Seçili nesneyi böl"

#: src/slic3r/GUI/GUI_Factories.cpp:1231
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1234
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1237
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1237
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1241
msgid "Fill bed with instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1241
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:323
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155
msgid "Name"
msgstr "İsim"

#: src/slic3r/GUI/GUI_ObjectList.cpp:342 src/slic3r/GUI/GUI_ObjectList.cpp:513
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:423
msgid "Wrong volume index "
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:433
msgid "No errors detected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:442
#, c-format, boost-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:448
#, c-format, boost-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:450
#, c-format, boost-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:452
#, c-format, boost-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:454
#, c-format, boost-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:456
#, c-format, boost-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:459 src/slic3r/GUI/GUI_ObjectList.cpp:462
#, c-format, boost-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:461
msgid "Remaining errors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:469
msgid "Right button click the icon to fix STL through Netfabb"
msgstr "STL'yi Netfabb ile düzeltmek için simgeye sağ tıklayın"

#: src/slic3r/GUI/GUI_ObjectList.cpp:515
msgid "Right button click the icon to change the object settings"
msgstr "Nesne ayarlarını değiştirmek için simgeye sağ tıklayın"

#: src/slic3r/GUI/GUI_ObjectList.cpp:517
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:521
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:523
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:649
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:669
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:669
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1307
#: src/slic3r/GUI/GUI_ObjectList.cpp:4583
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1313
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1313
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1363
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1364
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1365
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1404
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1405
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1406
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1486
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1486
msgid "Load Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1582 src/slic3r/GUI/Plater.cpp:2450
msgid "Loading"
msgstr "Yükleniyor"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1617 src/slic3r/GUI/Plater.cpp:2491
msgid "Loading file"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1625
msgid "Error!"
msgstr "Hata!"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1721
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1761
msgid "Generic"
msgstr "Genel"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1828
msgid "Add Shape from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1828
msgid "Add Shapes from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1947
msgid "Remove paint-on supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1954
msgid "Remove paint-on seam"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1968
msgid "Remove Multi Material painting"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1974
msgid "Shift objects to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1980
msgid "Remove variable layer height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2001
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2025
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2041
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2059
msgid "Delete connector from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2060
msgid "Delete solid part from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2061
msgid "Delete negative volume from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2063
msgid ""
"To save cut correspondence you can delete all connectors from all related "
"objects."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2066
msgid ""
"This action will break a cut correspondence.\n"
"After that PrusaSlicer can't guarantee model consistency.\n"
"\n"
"To manipulate with solid parts or negative volumes you have to invalidate "
"cut infornation first."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2074
#: src/slic3r/GUI/GUI_ObjectList.cpp:2606
msgid "Delete all connectors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2105
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2114
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2140
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2144
msgid "Instance cannot be deleted from cut object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2148
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2172
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr "Seçilen nesne bölünemedi çünkü yalnızca bir parça içeriyordu."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2176
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2291
msgid "Merged"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2386
msgid "Merge all parts to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2418
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2689
msgid "Cut Connectors information"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2699
#: src/slic3r/GUI/GUI_ObjectList.cpp:2762
msgid "Object manipulation"
msgstr "Nesne yönetimi"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2708
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1463
msgid "Group manipulation"
msgstr "Grup manipülasyonu"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2796
msgid "Object Settings to modify"
msgstr "Değiştirilecek Nesne Ayarları"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2800
msgid "Part Settings to modify"
msgstr "Değiştirilecek Parça Ayarları"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2805
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2811
msgid "Part manipulation"
msgstr "Bölüm manipülasyon"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2819
msgid "Instance manipulation"
msgstr "Kopya yönetimi"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2827
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2827
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3357
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3435
#: src/slic3r/GUI/GUI_ObjectList.cpp:3463
#: src/slic3r/GUI/GUI_ObjectList.cpp:3483
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3529
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3533
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3538
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3597
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3983
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3995
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4132
msgid "Object or Instance"
msgstr "Nesne veya Örnek"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4133
#: src/slic3r/GUI/GUI_ObjectList.cpp:4325
msgid "Part"
msgstr "Bölüm"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4133
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4135
msgid "Unsupported selection"
msgstr "Desteklenmeyen seçim"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4136
#, c-format, boost-format
msgid "You started your selection with %s Item."
msgstr "Seçiminize %s öğe ile başladınız."

#: src/slic3r/GUI/GUI_ObjectList.cpp:4137
#, c-format, boost-format
msgid "In this mode you can select only other %s Items%s"
msgstr "Bu modda sadece diğer %s maddeleri seçebilirsiniz. %s"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4140
msgid "of a current Object"
msgstr "geçerli bir Nesnenin"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4145
#: src/slic3r/GUI/GUI_ObjectList.cpp:4220 src/slic3r/GUI/Plater.cpp:196
msgid "Info"
msgstr "Bilgi"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4325
msgid "Negative Volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4337
msgid "Support Blocker"
msgstr "Destek Engelleyici"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4337
msgid "Support Enforcer"
msgstr "Destek Uygulayıcı"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4347
msgid "Select type of part"
msgstr "Parça türünü seçin"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4353
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4613
msgid "Enter new name"
msgstr "Yeni isim girin"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4613
msgid "Renaming"
msgstr "Yeniden adlandırma"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4675
msgid "Repairing model"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4704
msgid "Fix through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4707
msgid "Fixing through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4737
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4743
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4748
msgid "Repairing was canceled"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4862
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4983
msgid "Set Printable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4983
msgid "Set Unprintable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4985
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4985
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4986
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4986
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:61
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:96
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1123
msgid "World coordinates"
msgstr "Dünya koordinatları"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:97
msgid "Local coordinates"
msgstr "Yerel koordinatlar"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:67
msgid "Select coordinate space, in which the transformation will be performed."
msgstr "Dönüşümün gerçekleştirileceği koordinat alanını seçin."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:157 src/libslic3r/GCode.cpp:487
msgid "Object name"
msgstr "Nesne adı"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:221
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:698
msgid "Position"
msgstr "Pozisyon"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:222
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:699
#: src/slic3r/GUI/Mouse3DController.cpp:478
#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Rotation"
msgstr "Rotasyon"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:239
msgid "Size [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275
msgid "Mirror along"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275
#, c-format, boost-format
msgid " %c "
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275
msgid "axis"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:279
#, c-format, boost-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:329
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:374
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:387
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:393
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:401
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:428
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:445
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:468
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:481
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:503
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:534
msgid "Reset skew"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:541
msgid "Inches"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:700
msgid "Scale factors"
msgstr "Ölçek"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:728
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:740
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:782
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:790
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:800
msgid "Rotate (relative)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:739
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:789
msgid "Translate (relative) [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:818
msgid "Translate"
msgstr "Çeviri"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:894
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1015
msgid "Left handed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1124
msgid "Object coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1125
msgid "Part coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1167
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1211
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1342
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1359
msgid "Set Size"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1418
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""
"Hali hazırda yönetilen nesne eğiktir (dönme açıları 90 °'nin katları "
"değildir).\n"
"Eğik nesnelerin düzgün olmayan bir şekilde ölçeklendirilmesi sadece "
"koordinat sisteminde mümkündür, çünkü rotasyon nesne koordinatlarına gömülü "
"değildir."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1421
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""
"Bu işlem geri alınamaz.\n"
"Devam etmek ister misiniz?"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:63
msgid "Additional Settings"
msgstr "Ek ayarlar"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:99
msgid "Remove parameter"
msgstr "Parametre kaldır"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:105
#, c-format, boost-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
#, c-format, boost-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:581
msgid "NOTE:"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:582
#, boost-format
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:583
msgid "Apply color change automatically"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:773
#: src/slic3r/GUI/HintNotification.cpp:799
#: src/slic3r/GUI/NotificationManager.cpp:457
#: src/slic3r/GUI/NotificationManager.cpp:474
msgid "More"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:914
msgid "Open Preferences."
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:1006
msgid "Open Documentation in web browser."
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:657
msgid "Edit"
msgstr "Düzenle"

#: src/slic3r/GUI/ImGuiWrapper.cpp:1157 src/slic3r/GUI/Search.cpp:525
msgid "Use for search"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1158 src/slic3r/GUI/Search.cpp:518
msgid "Category"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1160 src/slic3r/GUI/Search.cpp:520
msgid "Search in English"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:168
msgid "Arranging"
msgstr "Düzenleme"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:205
msgid "Arranging done."
msgstr "Düzenleme yapıldı."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:225
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "Model nesneleri düzenlenemedi! Bazı geometriler geçersiz olabilir."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:265
#, c-format, boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:108
msgid "Filling bed"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:140
msgid "Bed filling canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:141
msgid "Bed filling done."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:148 src/slic3r/GUI/Jobs/EmbossJob.cpp:596
msgid "Can't create empty volume."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:201
msgid "Can't create empty object."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:208
msgid "Add Emboss text object"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:247
msgid "Created text volume is empty. Change text or font."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:465
msgid ""
"It is used default volume for embossed text, try to change text or font for "
"fix it."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:549
#, boost-format
msgid "Text: %1%"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:593
msgid "Bad object to create volume."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:598
msgid "Add Emboss text Volume"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:698
msgid "Font doesn't have any shape for given text."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:738
msgid "There is no volume in projection direction."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:787
msgid "There is no valid surface for text projection."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:823
msgid "Issue during embossing the text."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:22
msgid "Best surface quality"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24
msgid "Optimize object rotation for best surface quality."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:25
msgid "Reduced overhang slopes"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:27
msgid ""
"Optimize object rotation to have minimum amount of overhangs needing support "
"structures.\n"
"Note that this method will try to find the best surface of the object for "
"touching the print bed if no elevation is set."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31
msgid "Lowest Z height"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:33
msgid "Rotate the model to have the lowest z height for faster print time."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:53
msgid "Searching for optimal orientation"
msgstr "Optimum yönlendirme aranıyor"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:83
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:84
msgid "Orientation found."
msgstr "Oryantasyon bulundu."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
msgid "Importing SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:77
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81
msgid "Import is unavailable for this archive format."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:86
msgid "Importing canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:87
msgid "Importing done."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:108
msgid "The file does not exist."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:148 src/slic3r/GUI/Plater.cpp:2532
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:150 src/slic3r/GUI/Plater.cpp:2534
msgid "Attention!"
msgstr "Dikkat!"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:166
msgid "The profile in the imported archive is corrupt and will not be loaded."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:178
msgid ""
"No object could be retrieved from the archive. The slices might be corrupted "
"or missing."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1183
msgid "Keyboard Shortcuts"
msgstr "Klavye kısayolları"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
msgid "New project, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
msgid "Open project AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:88
msgid "Save project (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
msgid "Save project as (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:90
msgid "(Re)slice"
msgstr "(Tekrar) dilimle"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Import Config from ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:96 src/slic3r/GUI/Plater.cpp:945
#: src/slic3r/GUI/Plater.cpp:7354 src/libslic3r/PrintConfig.cpp:4628
msgid "Export G-code"
msgstr "G-code Dışa Aktar"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:97 src/slic3r/GUI/Plater.cpp:7355
msgid "Send G-code"
msgstr "G kodunu gönder"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
msgid "Export config"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99 src/slic3r/GUI/Plater.cpp:928
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Eject SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
msgid "Select all objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Deselect all"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
msgid "Delete selected"
msgstr "Seçileni sil"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Paste from clipboard"
msgstr "Panodan yapıştır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
msgid "Reload plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Select Plater Tab"
msgstr "Tabla Sekmesini Seç"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr "Yazdırma Ayarları Sekmesi"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr "Filament Ayarları Sekmesi"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr "Yazıcı Ayarları Sekmesi"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr "3B görünüme geç"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr "Ön izleme"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
#: src/slic3r/GUI/PrintHostDialogs.cpp:266
msgid "Print host upload queue"
msgstr "Ana bilgisayar yükleme kuyruğunu yazdır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124 src/slic3r/GUI/MainFrame.cpp:77
msgid "Open new instance"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Camera view"
msgstr "Kamera görünümü"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Preferences.cpp:57
#: src/slic3r/GUI/Preferences.cpp:165 src/slic3r/GUI/Preferences.cpp:191
#: src/slic3r/GUI/Preferences.cpp:210 src/slic3r/GUI/Preferences.cpp:218
msgid "Preferences"
msgstr "Tercihler"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Show keyboard shortcuts list"
msgstr "Klavye kısayolları listesini göster"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
msgid "Commands"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Add Instance of the selected object"
msgstr "Seçilen nesnenin örneğini ekle"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Remove Instance of the selected object"
msgstr "Seçilen nesnenin örneğini kaldır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Press to activate selection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Press to activate deselection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Arrow Up"
msgstr "Yukarı ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Move selection 10 mm in positive Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Arrow Down"
msgstr "Aşağı ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Move selection 10 mm in negative Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Arrow Left"
msgstr "Sol ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Move selection 10 mm in negative X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Arrow Right"
msgstr "Sağ Ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Move selection 10 mm in positive X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Any arrow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Movement step set to 1 mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Movement in camera space"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Page Up"
msgstr "Page Up"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Rotate selection 45 degrees CCW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Page Down"
msgstr "Page Down"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Rotate selection 45 degrees CW"
msgstr ""

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Gizmo move"
msgstr "Gizmo hareketi"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Gizmo scale"
msgstr "Gizmo ölçeği"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Gizmo rotate"
msgstr "Gizmo döndürme"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Gizmo cut"
msgstr "Gizmo kesim"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Gizmo Place face on bed"
msgstr "Gizmo yüzeyini tablaya yerleştir"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Gizmo SLA hollow"
msgstr ""

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Gizmo SLA support points"
msgstr "Gizmo SLA destek noktaları"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Gizmo FDM paint-on supports"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Gizmo FDM paint-on seam"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Gizmo Multi Material painting"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Gizmo Text emboss / engrave"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Unselect gizmo or clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Zoom to Bed"
msgstr "Tablaya Yakınlaştır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Zoom in"
msgstr "Yaklaş"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Zoom out"
msgstr "Uzaklaş"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Switch between Editor/Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Collapse/Expand the sidebar"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Minimize application"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187 src/slic3r/GUI/MainFrame.cpp:329
#: src/slic3r/GUI/MainFrame.cpp:378 src/slic3r/GUI/MainFrame.cpp:490
#: src/slic3r/GUI/MainFrame.cpp:493 src/slic3r/GUI/MainFrame.cpp:515
#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Plater"
msgstr "Tabla"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
msgid "Gizmo move: Press to snap by 1mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
msgid "Gizmo scale: Press to snap by 5%"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Gizmos"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Set selected items as Printable/Unprintable"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
msgid "Set default extruder for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
msgid "Set extruder number for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
msgid "Objects List"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1607
msgid "Open a G-code file"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1439
#: src/slic3r/GUI/MainFrame.cpp:1443 src/slic3r/GUI/MainFrame.cpp:1612
#: src/slic3r/GUI/MainFrame.cpp:1616
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Vertical slider - Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
msgid "Vertical slider - Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
msgid "Horizontal slider - Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
msgid "Horizontal slider - Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
msgid "On/Off one layer mode of the vertical slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
msgid "Show/Hide legend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Show/Hide G-code window"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236 src/slic3r/GUI/Plater.cpp:4750
#: src/slic3r/GUI/Tab.cpp:2734
msgid "Preview"
msgstr "Ön izleme"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
msgid "Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
msgid "Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
msgid "Set upper thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
msgid "Set lower thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Add color change marker for current layer"
msgstr "Mevcut katman için renk değiştirme işaretçisini ekle"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
msgid "Delete color change marker for current layer"
msgstr "Geçerli katman için renk değişikliği işaretçisini sil"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
#: src/slic3r/GUI/KBShortcutsDialog.cpp:257
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Vertical Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Set left thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Set right thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid "Horizontal Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:284
msgid "Keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:91
#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Open a new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:93
msgid "G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1384
msgid "Open G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1623
msgid "Open PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:93
msgid "Open new G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:227
msgid "Closing PrusaSlicer. Current project is modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "PrusaSlicer is closing"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "Closing PrusaSlicer while some presets are modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:330 src/slic3r/GUI/MainFrame.cpp:380
#: src/slic3r/GUI/Tab.hpp:413 src/slic3r/GUI/Tab.hpp:539
msgid "Print Settings"
msgstr "Baskı Ayarları"

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:384
#: src/slic3r/GUI/MainFrame.cpp:2193 src/slic3r/GUI/MainFrame.cpp:2194
#: src/slic3r/GUI/Tab.hpp:520
msgid "Material Settings"
msgstr "Malzeme Ayarları"

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:382
#: src/slic3r/GUI/MainFrame.cpp:2193 src/slic3r/GUI/MainFrame.cpp:2194
#: src/slic3r/GUI/Tab.hpp:448
msgid "Filament Settings"
msgstr "Filament Ayarları"

#: src/slic3r/GUI/MainFrame.cpp:332 src/slic3r/GUI/MainFrame.cpp:386
#: src/slic3r/GUI/Tab.hpp:488
msgid "Printer Settings"
msgstr "Yazıcı ayarları"

#: src/slic3r/GUI/MainFrame.cpp:684 src/slic3r/GUI/Plater.cpp:1725
#: src/slic3r/GUI/Plater.cpp:2875
msgid "Untitled"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:709
msgid "based on Slic3r"
msgstr "slic3r uygulamasına dayalı"

#: src/slic3r/GUI/MainFrame.cpp:1149
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D ve Sürücüler"

#: src/slic3r/GUI/MainFrame.cpp:1149
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "Prusa3D sürücüleri indirme sayfasını tarayıcınızda açar"

#: src/slic3r/GUI/MainFrame.cpp:1151
msgid "Software &Releases"
msgstr "Yazılım ve Bültenler"

#: src/slic3r/GUI/MainFrame.cpp:1151
msgid "Open the software releases page in your browser"
msgstr "Tarayıcınızda yazılım sürümleri sayfasını açar"

#: src/slic3r/GUI/MainFrame.cpp:1157
#, c-format, boost-format
msgid "%s &Website"
msgstr "%s &Web Sitesi"

#: src/slic3r/GUI/MainFrame.cpp:1158
#, c-format, boost-format
msgid "Open the %s website in your browser"
msgstr "Tarayıcınızda %s web sitesini açar"

#: src/slic3r/GUI/MainFrame.cpp:1164
msgid "System &Info"
msgstr "Sistem bilgisi"

#: src/slic3r/GUI/MainFrame.cpp:1164
msgid "Show system information"
msgstr "Sistem bilgisini göster"

#: src/slic3r/GUI/MainFrame.cpp:1166
msgid "Show &Configuration Folder"
msgstr "&Yapılandırma Klasörünü Göster"

#: src/slic3r/GUI/MainFrame.cpp:1166
msgid "Show user configuration folder (datadir)"
msgstr "Kullanıcı konfigürasyon klasörünü göster"

#: src/slic3r/GUI/MainFrame.cpp:1168
msgid "Report an I&ssue"
msgstr "Bir Görüş Bildirin"

#: src/slic3r/GUI/MainFrame.cpp:1168
#, c-format, boost-format
msgid "Report an issue on %s"
msgstr "%s ile ilgili görüş bildirin"

#: src/slic3r/GUI/MainFrame.cpp:1171 src/slic3r/GUI/MainFrame.cpp:1174
#, c-format, boost-format
msgid "&About %s"
msgstr "%s &Hakkında"

#: src/slic3r/GUI/MainFrame.cpp:1171 src/slic3r/GUI/MainFrame.cpp:1174
msgid "Show about dialog"
msgstr "Hakkında"

#: src/slic3r/GUI/MainFrame.cpp:1176
msgid "Show Tip of the Day"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1180
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1183
msgid "Show the list of the keyboard shortcuts"
msgstr "Klavye kısayollarının listesini göster"

#: src/slic3r/GUI/MainFrame.cpp:1197
msgid "Iso"
msgstr "Perspektif"

#: src/slic3r/GUI/MainFrame.cpp:1197
msgid "Iso View"
msgstr "Perspektif görünümü"

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1201 src/libslic3r/PrintConfig.cpp:3024
#: src/libslic3r/PrintConfig.cpp:3033
msgid "Top"
msgstr "Üst"

#: src/slic3r/GUI/MainFrame.cpp:1201
msgid "Top View"
msgstr "Üst Görünüm"

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1204 src/libslic3r/PrintConfig.cpp:470
#: src/libslic3r/PrintConfig.cpp:479
msgid "Bottom"
msgstr "Alt"

#: src/slic3r/GUI/MainFrame.cpp:1204
msgid "Bottom View"
msgstr "Alt Görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1206
msgid "Front"
msgstr "Ön"

#: src/slic3r/GUI/MainFrame.cpp:1206
msgid "Front View"
msgstr "Ön görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1208 src/libslic3r/PrintConfig.cpp:2307
msgid "Rear"
msgstr "Arka"

#: src/slic3r/GUI/MainFrame.cpp:1208
msgid "Rear View"
msgstr "Arka görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1210
msgid "Left"
msgstr "Sol"

#: src/slic3r/GUI/MainFrame.cpp:1210
msgid "Left View"
msgstr "Sol görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1212
msgid "Right"
msgstr "Sağ"

#: src/slic3r/GUI/MainFrame.cpp:1212
msgid "Right View"
msgstr "Sağ görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1225
msgid "&New Project"
msgstr "&Yeni Proje"

#: src/slic3r/GUI/MainFrame.cpp:1225
msgid "Start a new project"
msgstr "Yeni bir proje başlat"

#: src/slic3r/GUI/MainFrame.cpp:1228
msgid "&Open Project"
msgstr "& Proje Aç"

#: src/slic3r/GUI/MainFrame.cpp:1228
msgid "Open a project file"
msgstr "Bir proje dosyası açın"

#: src/slic3r/GUI/MainFrame.cpp:1233
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1245
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "&Save Project"
msgstr "& Projeyi Kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "Save current project file"
msgstr "Mevcut proje dosyasını kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save Project &as"
msgstr "Projeyi farklı kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save current project file as"
msgstr "Mevcut proje dosyasını farklı kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Import STL/3MF/STEP/OBJ/AM&F"
msgstr "STL/3MF/STEP/OBJ/AM&F"

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Load a model"
msgstr "Bir model yükle"

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Import STL (Imperial Units)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Load an model saved with imperial units"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Import SLA Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Load an SLA archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1297
msgid "Import &Config"
msgstr "&Ayarları İçe Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1297
msgid "Load exported configuration file"
msgstr "Dışa aktarılan yapılandırma dosyasını yükle"

#: src/slic3r/GUI/MainFrame.cpp:1300
msgid "Import Config from &Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1300
msgid "Load configuration from project file"
msgstr "Proje dosyasından yapılandırmayı yükle"

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Import Config &Bundle"
msgstr "Ha&zır Ayarları İçe Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Load presets from a bundle"
msgstr "Paketten hazır ayarları yükleme"

#: src/slic3r/GUI/MainFrame.cpp:1307
msgid "&Import"
msgstr "&İçe Aktarma"

#: src/slic3r/GUI/MainFrame.cpp:1310 src/slic3r/GUI/MainFrame.cpp:1672
msgid "Export &G-code"
msgstr "&G-code Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1310
msgid "Export current plate as G-code"
msgstr "Geçerli tablayı G-code olarak dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1314 src/slic3r/GUI/MainFrame.cpp:1673
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1314
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1318
msgid "Export G-code to SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1318
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export Plate as &STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export current plate as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1325
msgid "Export Plate as STL/OBJ &Including Supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1325
msgid "Export current plate as STL/OBJ including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1333 src/slic3r/GUI/MainFrame.cpp:1620
msgid "Export &Toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1333 src/slic3r/GUI/MainFrame.cpp:1620
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1337
msgid "Export &Config"
msgstr "Ayarları &Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1337
msgid "Export current configuration to file"
msgstr "Geçerli yapılandırmayı dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1340
msgid "Export Config &Bundle"
msgstr "&Hazır Ayarları Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1340
msgid "Export all presets to file"
msgstr "Tüm hazır ayarları dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1343
msgid "Export Config Bundle With Physical Printers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1343
msgid "Export all presets including physical printers to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1346
msgid "&Export"
msgstr "&Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid "Ejec&t SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1356
msgid "Quick Slice"
msgstr "Hızlı Dilim"

#: src/slic3r/GUI/MainFrame.cpp:1356
msgid "Slice a file into a G-code"
msgstr "Bir dosyayı G koduna dilimleme"

#: src/slic3r/GUI/MainFrame.cpp:1362
msgid "Quick Slice and Save As"
msgstr "Hızlı Dilim ve Farklı Kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1362
msgid "Slice a file into a G-code, save as"
msgstr "Bir dosyayı dilimle ve farklı kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1368
msgid "Repeat Last Quick Slice"
msgstr "Son Hızlı Dilimi Tekrarla"

#: src/slic3r/GUI/MainFrame.cpp:1368
msgid "Repeat last quick slice"
msgstr "Son hızlı dilimi tekrarla"

#: src/slic3r/GUI/MainFrame.cpp:1376
msgid "(Re)Slice No&w"
msgstr "(Tekrar)Dilimle"

#: src/slic3r/GUI/MainFrame.cpp:1376
msgid "Start new slicing process"
msgstr "Yeni dilimleme işlemine başla"

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "&Repair STL file"
msgstr "& STL dosyasını onar"

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "Automatically repair an STL file"
msgstr "Bir STL dosyasını otomatik olarak onar"

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "&G-code Preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "E&xit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1388 src/slic3r/GUI/UpdateDialogs.cpp:376
#: src/slic3r/GUI/UpdateDialogs.cpp:423
#, c-format, boost-format
msgid "Exit %s"
msgstr "%s Çıkış"

#: src/slic3r/GUI/MainFrame.cpp:1390 src/slic3r/GUI/MainFrame.cpp:1627
msgid "&Quit"
msgstr "&Çıkış"

#: src/slic3r/GUI/MainFrame.cpp:1390 src/slic3r/GUI/MainFrame.cpp:1627
#, c-format, boost-format
msgid "Quit %s"
msgstr "%s uygulamasını kapat"

#: src/slic3r/GUI/MainFrame.cpp:1406
msgid "&Select All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1407
msgid "Selects all objects"
msgstr "Tüm nesneleri seçer"

#: src/slic3r/GUI/MainFrame.cpp:1409
msgid "D&eselect All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1410
msgid "Deselects all objects"
msgstr "Tüm nesnelerin seçimini kaldırır"

#: src/slic3r/GUI/MainFrame.cpp:1413
msgid "&Delete Selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1414
msgid "Deletes the current selection"
msgstr "Mevcut seçimi siler"

#: src/slic3r/GUI/MainFrame.cpp:1416
msgid "Delete &All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1417
msgid "Deletes all objects"
msgstr "Tüm nesneleri sil"

#: src/slic3r/GUI/MainFrame.cpp:1421
msgid "&Undo"
msgstr "&Geri Al"

#: src/slic3r/GUI/MainFrame.cpp:1424
msgid "&Redo"
msgstr "&Yinele"

#: src/slic3r/GUI/MainFrame.cpp:1429
msgid "&Copy"
msgstr "&Kopyala"

#: src/slic3r/GUI/MainFrame.cpp:1430
msgid "Copy selection to clipboard"
msgstr "Seçimi panoya kopyala"

#: src/slic3r/GUI/MainFrame.cpp:1432
msgid "&Paste"
msgstr "&Yapıştır"

#: src/slic3r/GUI/MainFrame.cpp:1433
msgid "Paste clipboard"
msgstr "Panodan yapıştır"

#: src/slic3r/GUI/MainFrame.cpp:1438 src/slic3r/GUI/MainFrame.cpp:1442
#: src/slic3r/GUI/MainFrame.cpp:1611 src/slic3r/GUI/MainFrame.cpp:1615
msgid "Re&load from Disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1448
msgid "Searc&h"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1449
msgid "Search in settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1457
msgid "&Plater Tab"
msgstr "&Tabla Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1457
msgid "Show the plater"
msgstr "Tablayı göster"

#: src/slic3r/GUI/MainFrame.cpp:1462
msgid "P&rint Settings Tab"
msgstr "B&askı Ayarları Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1462
msgid "Show the print settings"
msgstr "Baskı ayarlarını göster"

#: src/slic3r/GUI/MainFrame.cpp:1465 src/slic3r/GUI/MainFrame.cpp:1675
msgid "&Filament Settings Tab"
msgstr "& Filament Ayarları Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1465
msgid "Show the filament settings"
msgstr "Filament ayarlarını göster"

#: src/slic3r/GUI/MainFrame.cpp:1469
msgid "Print&er Settings Tab"
msgstr "Yazıcı Ayarları S&ekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1469
msgid "Show the printer settings"
msgstr "Yazıcı ayarlarını göster"

#: src/slic3r/GUI/MainFrame.cpp:1475
msgid "3&D"
msgstr "3&B"

#: src/slic3r/GUI/MainFrame.cpp:1475
msgid "Show the 3D editing view"
msgstr "3B düzenleme görünümünü göster"

#: src/slic3r/GUI/MainFrame.cpp:1478
msgid "Pre&view"
msgstr "Ön izleme"

#: src/slic3r/GUI/MainFrame.cpp:1478
msgid "Show the 3D slices preview"
msgstr "3B dilimleme ön izlemesini göster"

#: src/slic3r/GUI/MainFrame.cpp:1484
msgid "Open the dialog to modify shape gallery"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1495
msgid "Print &Host Upload Queue"
msgstr "Yazdırma ve Ana Bilgisayar Yükleme Kuyruğu"

#: src/slic3r/GUI/MainFrame.cpp:1495
msgid "Display the Print Host Upload Queue window"
msgstr "Ana Bilgisayar Yükleme Sırasını Yazdır penceresini görüntüle"

#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Open New Instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1503
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1751
msgid "Compare Presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1503
msgid "Compare presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1513
msgid "Show &Labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1513
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1516
msgid "Show Legen&d"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1516
msgid "Show legend in preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1519
msgid "&Collapse Sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1519 src/slic3r/GUI/Plater.cpp:2344
msgid "Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1524
msgid "&Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1524
msgid "Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1539 src/slic3r/GUI/MainFrame.cpp:1646
msgid "&File"
msgstr "&Dosya"

#: src/slic3r/GUI/MainFrame.cpp:1540
msgid "&Edit"
msgstr "&Düzenle"

#: src/slic3r/GUI/MainFrame.cpp:1541
msgid "&Window"
msgstr "&Pencere"

#: src/slic3r/GUI/MainFrame.cpp:1542 src/slic3r/GUI/MainFrame.cpp:1647
msgid "&View"
msgstr "&Görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1545 src/slic3r/GUI/MainFrame.cpp:1650
msgid "&Help"
msgstr "&Yardım"

#: src/slic3r/GUI/MainFrame.cpp:1607
msgid "&Open G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1623
msgid "Open &PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1637
msgid "Show legen&d"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1637
msgid "Show legend"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1672
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1673
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1675
msgid "Mate&rial Settings Tab"
msgstr "Mate&ryal Ayarları Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1699
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Dilimlemek için bir dosya seçin (STL / OBJ / AMF / 3MF / PRUSA):"

#: src/slic3r/GUI/MainFrame.cpp:1711
msgid "No previously sliced file."
msgstr "Daha önce dilimlenmiş dosya yok."

#: src/slic3r/GUI/MainFrame.cpp:1718
msgid "Previously sliced file ("
msgstr "Önceden dilimlenmiş dosya ("

#: src/slic3r/GUI/MainFrame.cpp:1718
msgid ") not found."
msgstr ") bulunamadı."

#: src/slic3r/GUI/MainFrame.cpp:1719
msgid "File Not Found"
msgstr "Dosya bulunamadı"

#: src/slic3r/GUI/MainFrame.cpp:1754
#, c-format, boost-format
msgid "Save %s file as:"
msgstr "%s dosyasını farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1754
msgid "SVG"
msgstr "SVG"

#: src/slic3r/GUI/MainFrame.cpp:1754
msgid "G-code"
msgstr "G-kod"

#: src/slic3r/GUI/MainFrame.cpp:1766
msgid "Save zip file as:"
msgstr "Zip dosyasını farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1775 src/slic3r/GUI/Plater.cpp:3383
#: src/slic3r/GUI/Plater.cpp:6848 src/slic3r/GUI/Tab.cpp:1633
#: src/slic3r/GUI/Tab.cpp:4984
msgid "Slicing"
msgstr "Dilimleme"

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:1777
#, c-format, boost-format
msgid "Processing %s"
msgstr "%s"

#: src/slic3r/GUI/MainFrame.cpp:1800
#, boost-format
msgid "%1% was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1803
msgid "Slicing Done!"
msgstr "Dilimleme Yapıldı!"

#: src/slic3r/GUI/MainFrame.cpp:1819
msgid "Select the STL file to repair:"
msgstr "Onarılacak STL dosyasını seçin:"

#: src/slic3r/GUI/MainFrame.cpp:1829
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""
"OBJ dosyasını kaydet (hataları STL'den koordine etmeye daha az eğilimli):"

#: src/slic3r/GUI/MainFrame.cpp:1840
msgid "Your file was repaired."
msgstr "Dosyanız onarıldı."

#: src/slic3r/GUI/MainFrame.cpp:1840 src/libslic3r/PrintConfig.cpp:4747
msgid "Repair"
msgstr "Onar"

#: src/slic3r/GUI/MainFrame.cpp:1854
msgid "Save configuration as:"
msgstr "Yapılandırmayı farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1871
msgid "Loading of a configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1873 src/slic3r/GUI/MainFrame.cpp:1940
msgid "Select configuration to load:"
msgstr "Yüklenecek yapılandırmayı seçin:"

#: src/slic3r/GUI/MainFrame.cpp:1904
msgid "Exporting configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1905
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1914
msgid "Save presets bundle as:"
msgstr "Ön ayar paketini farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1937
msgid "Loading of a configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1967
#, c-format, boost-format
msgid "%d presets successfully imported."
msgstr "%d ön ayar başarıyla içe aktarıldı."

#: src/slic3r/GUI/Mouse3DController.cpp:453
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:464
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:472
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:484
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:490
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:505
msgid "Options:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Swap Y/Z axes"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:227
#, c-format, boost-format
msgid "%s error"
msgstr "%s hata"

#: src/slic3r/GUI/MsgDialog.cpp:228
#, c-format, boost-format
msgid "%s has encountered an error"
msgstr "%s bir hatayla karşılaştı"

#: src/slic3r/GUI/MsgDialog.cpp:247
#, c-format, boost-format
msgid "%s warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:248
#, c-format, boost-format
msgid "%s has a warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:261 src/slic3r/GUI/MsgDialog.cpp:274
#, c-format, boost-format
msgid "%s info"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:302
#, c-format, boost-format
msgid "%s information"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:897
msgid "3D Mouse disconnected."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:898
msgid "Configuration update is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:898
msgid "See more."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:906
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:909
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:911
msgid "Desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:913
msgid "Desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:915
msgid "Undo desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:917
msgid "Undo desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:918
msgid "Exporting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:773
msgid "Open Folder."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:811
msgid "Eject drive"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1054
#: src/slic3r/GUI/NotificationManager.cpp:1267
#: src/slic3r/GUI/NotificationManager.cpp:1472
msgid "ERROR"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1269
#: src/slic3r/GUI/NotificationManager.cpp:1377
msgid "COMPLETED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1467
msgid "RESOLVING ADDRESS"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1477
msgid "CANCELED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1539
msgid "Cancel upload"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1648
#, c-format, boost-format
msgid "%1$d object was loaded with custom supports."
msgid_plural "%1$d objects were loaded with custom supports."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1649
#, c-format, boost-format
msgid "%1$d object was loaded with custom seam."
msgid_plural "%1$d objects were loaded with custom seam."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1650
#, c-format, boost-format
msgid "%1$d object was loaded with multimaterial painting."
msgid_plural "%1$d objects were loaded with multimaterial painting."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1651
#, c-format, boost-format
msgid "%1$d object was loaded with variable layer height."
msgid_plural "%1$d objects were loaded with variable layer height."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1652
#, c-format, boost-format
msgid "%1$d object was loaded with partial sinking."
msgid_plural "%1$d objects were loaded with partial sinking."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1653
#, c-format, boost-format
msgid "%1$d object was loaded as a part of cut object."
msgid_plural "%1$d objects were loaded as parts of cut object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Slicing finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export G-Code."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2101
#: src/slic3r/GUI/NotificationManager.cpp:2108
#: src/slic3r/GUI/NotificationManager.cpp:2124
#: src/slic3r/GUI/NotificationManager.cpp:2130
#: src/slic3r/GUI/NotificationManager.cpp:2201
msgid "ERROR:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2113
#: src/slic3r/GUI/NotificationManager.cpp:2140
#: src/slic3r/GUI/NotificationManager.cpp:2148
#: src/slic3r/GUI/NotificationManager.cpp:2159 src/slic3r/GUI/Plater.cpp:3244
msgid "WARNING:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2275
msgid "Exporting finished."
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:67
msgid "Paint-on seam"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:68
msgid "Cut connectors"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:70
msgid "Sinking"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:110
msgid "Instances"
msgstr "Örnekleri"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:114
#: src/slic3r/GUI/ObjectDataViewModel.cpp:275
#, c-format, boost-format
msgid "Instance %d"
msgstr "Kopya %d"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:121 src/slic3r/GUI/Tab.cpp:4803
#: src/slic3r/GUI/Tab.cpp:4940
msgid "Layers"
msgstr "Katmanlar"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:376
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL ES 2.0 capable graphics driver to run "
"correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:379
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL %s capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:382
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:386
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:389
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:391
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:399
#, c-format, boost-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:400
msgid "Error loading shaders"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:375
msgctxt "Layers"
msgid "Top"
msgstr "Üst"

#: src/slic3r/GUI/OptionsGroup.cpp:375
msgctxt "Layers"
msgid "Bottom"
msgstr "Alt"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
msgid "Delete this preset from this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:84
msgid "This printer will be shown in the presets list as"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
msgid "Type here the name of your printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Descriptive name for the printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
msgid "Add preset for this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2237
msgid "Print Host upload"
msgstr "Ana Bilgisayar yüklemesini yazdır"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:273
msgid "Connection to printers connected via the print host failed."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:315
msgid "Test"
msgstr "Ölçek"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:320
msgid "Could not get a valid Printer Host reference"
msgstr "Geçerli bir Yazıcı Ana Bilgisayar başvurusu alınamadı"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:332
msgid "Success!"
msgstr "Başarı!"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:342
msgid "Refresh Printers"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:369
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS CA dosyası isteğe bağlıdır. HTTPS'yi kendinden imzalı bir sertifika "
"ile kullanıyorsanız gereklidir."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:379
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "Sertifika dosyaları (*.crt, *.pem) | *.crt; * Pem | Tüm dosyalar | *.*"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:380
msgid "Open CA certificate file"
msgstr "CA sertifika dosyasını aç"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:409
#: src/libslic3r/PrintConfig.cpp:347
msgid "HTTPS CA File"
msgstr "HTTPS CA Dosyası"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:410
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
"Bu sistemde, %s , sistem Sertifika Deposu veya Anahtarlıktan HTTPS "
"sertifikaları kullanır."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:411
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"Özel bir CA dosyası kullanmak için, lütfen CA dosyanızı Sertifika Deposu/"
"Anahtarlık içine aktarın."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:704
msgid "The supplied name is empty. It can't be saved."
msgstr "Sağlanan ad boş. Kurtarılamaz."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:708
msgid "You have to enter a printer name."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:716
#, boost-format
msgid "Printer with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:717
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:744
#, boost-format
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:794
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:157
msgid "The provided name is not valid;"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:158 src/slic3r/GUI/SavePresetDialog.cpp:166
msgid "the following characters are not allowed:"
msgstr "aşağıdaki karakterlere izin verilmez:"

#: src/slic3r/GUI/Plater.cpp:222
msgid ""
"For a multipart object, this value isn't accurate.\n"
"It doesn't take account of intersections and negative volumes."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:226
msgid "Volume"
msgstr "Hacim"

#: src/slic3r/GUI/Plater.cpp:228
msgid "Facets"
msgstr "Yüzey Sayısı"

#: src/slic3r/GUI/Plater.cpp:285
msgid "Sliced Info"
msgstr "Dilimlenmiş Bilgi"

#: src/slic3r/GUI/Plater.cpp:305 src/slic3r/GUI/Plater.cpp:1411
msgid "Used Filament (g)"
msgstr "Kullanılan Filament (g)"

#: src/slic3r/GUI/Plater.cpp:306 src/slic3r/GUI/Plater.cpp:1392
msgid "Used Filament (m)"
msgstr "Kullanılan Filament (m)"

#: src/slic3r/GUI/Plater.cpp:307 src/slic3r/GUI/Plater.cpp:1404
msgid "Used Filament (mm³)"
msgstr "Kullanılan Filament (mm³)"

#: src/slic3r/GUI/Plater.cpp:308
msgid "Used Material (unit)"
msgstr "Kullanılan Malzeme (birim)"

#: src/slic3r/GUI/Plater.cpp:309
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:310 src/slic3r/GUI/Plater.cpp:1374
#: src/slic3r/GUI/Plater.cpp:1461
msgid "Estimated printing time"
msgstr "Tahmini baskı süresi"

#: src/slic3r/GUI/Plater.cpp:311
msgid "Number of tool changes"
msgstr "Takım değişikliği sayısı"

#: src/slic3r/GUI/Plater.cpp:437
msgid "Select what kind of support do you need"
msgstr "Ne tür bir desteğe ihtiyacınız olduğunu seçin"

#: src/slic3r/GUI/Plater.cpp:439 src/libslic3r/PrintConfig.cpp:2630
#: src/libslic3r/PrintConfig.cpp:3448
msgid "Support on build plate only"
msgstr "Yalnızca tablada destek"

#: src/slic3r/GUI/Plater.cpp:440
msgid "For support enforcers only"
msgstr "Yalnızca destek uygulayıcıları için"

#: src/slic3r/GUI/Plater.cpp:441
msgid "Everywhere"
msgstr "Her yerde"

#: src/slic3r/GUI/Plater.cpp:473 src/slic3r/GUI/Tab.cpp:1490
msgid "Brim"
msgstr "Kenar (Brim)"

#: src/slic3r/GUI/Plater.cpp:475
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""
"Bu bayrak, ilk katmandaki her nesnenin etrafına basılacak kenarı (brim) "
"etkinleştirir."

#: src/slic3r/GUI/Plater.cpp:483
msgid "Purging volumes"
msgstr "Boşaltma hacimleri"

#: src/slic3r/GUI/Plater.cpp:591
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:593
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:594
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:926 src/slic3r/GUI/Plater.cpp:7355
msgid "Send to printer"
msgstr "Yazıcıya gönder"

#: src/slic3r/GUI/Plater.cpp:946 src/slic3r/GUI/Plater.cpp:3383
#: src/slic3r/GUI/Plater.cpp:6851
msgid "Slice now"
msgstr "Şimdi dilimle"

#: src/slic3r/GUI/Plater.cpp:1124
msgid "Hold Shift to Slice & Export G-code"
msgstr ""
"Dilimlemek ve G-code olarak Dışa Aktarmak için Üst Karakter(Shift) tuşunu "
"basılı tutun"

#: src/slic3r/GUI/Plater.cpp:1321
#, boost-format
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1349
msgid "Used Material (ml)"
msgstr "Kullanılan Malzeme (ml)"

#: src/slic3r/GUI/Plater.cpp:1352
msgid "object"
msgid_plural "objects"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1352
msgid "supports and pad"
msgstr "destekler ve ped"

#: src/slic3r/GUI/Plater.cpp:1392
msgid "Used Filament (in)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1394 src/slic3r/GUI/Plater.cpp:1447
msgid "objects"
msgstr "nesneleri"

#: src/slic3r/GUI/Plater.cpp:1394 src/slic3r/GUI/Plater.cpp:1447
msgid "wipe tower"
msgstr "temizleme kulesi"

#: src/slic3r/GUI/Plater.cpp:1404
msgid "Used Filament (in³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1430
#, boost-format
msgid "Filament at extruder %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1436
msgid "(including spool)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1445 src/libslic3r/PrintConfig.cpp:1132
#: src/libslic3r/PrintConfig.cpp:3768 src/libslic3r/PrintConfig.cpp:3769
msgid "Cost"
msgstr "Maliyet"

#: src/slic3r/GUI/Plater.cpp:1463
msgid "normal mode"
msgstr "normal mod"

#: src/slic3r/GUI/Plater.cpp:1470
msgid "stealth mode"
msgstr "gizli mod"

#: src/slic3r/GUI/Plater.cpp:1731
#, boost-format
msgid "Do you want to save the changes to \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1732 src/slic3r/GUI/UnsavedChangesDialog.cpp:905
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1623
msgid "Save"
msgstr "Kaydet"

#: src/slic3r/GUI/Plater.cpp:1732 src/slic3r/GUI/UnsavedChangesDialog.cpp:899
msgid "Discard"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1737 src/slic3r/GUI/Preferences.cpp:357
msgid "Ask for unsaved changes in project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1740
msgid ""
"You will not be asked about it again, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2211
#, c-format, boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2217
#, c-format, boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2236 src/slic3r/GUI/Plater.cpp:5421
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2343
msgid "Expand sidebar"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2425
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2580
#, boost-format
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2600
#, c-format, boost-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2604
msgid "The size of the object is zero"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2617
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2621 src/slic3r/GUI/Plater.cpp:2643
msgid "The object is too small"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2622 src/slic3r/GUI/Plater.cpp:2644
msgid "Apply to all the remaining small objects being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2639
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2656
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2659 src/slic3r/GUI/Plater.cpp:2707
msgid "Multi-part object detected"
msgstr "Çok parçalı nesne algılandı"

#: src/slic3r/GUI/Plater.cpp:2666
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2667
msgid "Detected advanced data"
msgstr "Gelişmiş veriler tespit edildi"

#: src/slic3r/GUI/Plater.cpp:2704
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2823
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""
"Nesneniz çok büyük görünüyor, bu nedenle baskı tablanıza uyacak şekilde "
"otomatik olarak küçültüldü."

#: src/slic3r/GUI/Plater.cpp:2824
msgid "Object too large?"
msgstr "Nesne çok mu büyük?"

#: src/slic3r/GUI/Plater.cpp:2904
msgid "Export STL file:"
msgstr "Dışa aktarılacak STL dosya:"

#: src/slic3r/GUI/Plater.cpp:2911
msgid "Export AMF file:"
msgstr "AMF dosyasını dışa aktar:"

#: src/slic3r/GUI/Plater.cpp:2917
msgid "Save file as:"
msgstr "Farklı kaydet:"

#: src/slic3r/GUI/Plater.cpp:2923
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3026
msgid "Delete object which is a part of cut object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3027
msgid ""
"You try to delete an object which is a part of a cut object.\n"
"This action will break a cut correspondence.\n"
"After that PrusaSlicer can't guarantee model consistency"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3031
msgid "Delete object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3036
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3053
msgid "Delete All Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3082
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3165
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3172
msgid "All non-solid parts (modifiers) were deleted"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3174
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3226
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3228
msgid "Enable supports for enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3363 src/slic3r/GUI/Plater.cpp:4426
msgid "Invalid data"
msgstr "Geçersiz veri"

#: src/slic3r/GUI/Plater.cpp:3434
msgid "Another export job is currently running."
msgstr "Şu anda başka bir dışa aktarma işlemi çalışıyor."

#: src/slic3r/GUI/Plater.cpp:3520
msgid "Replace from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3538
msgid "Unable to replace with more than one volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3538 src/slic3r/GUI/Plater.cpp:3621
msgid "Error during replace"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3613
msgid "Select the new file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3621
msgid "File for the replace wasn't selected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3776
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3807 src/slic3r/GUI/Plater.cpp:5566
#: src/slic3r/GUI/Plater.cpp:5576
msgid "The selected file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3808
msgid "differs from the original file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3808
msgid "Do you want to replace it"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3833 src/slic3r/GUI/Plater.cpp:3839
msgid "Reload from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4052
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4057
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4075
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4379
msgid "There are active warnings concerning sliced models:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4390
msgid "generated warnings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4742
msgid "3D editor view"
msgstr "3B düzenleme görünümü"

#: src/slic3r/GUI/Plater.cpp:5202
msgid "Undo / Redo is processing"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5204
#, boost-format
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5406
msgid "Creating a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5409
msgid "Creating a new project while some presets are modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5410
msgid "You can keep presets modifications to the new project or discard them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5411
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved then new project wouldn't keep them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5416
msgid "Creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5450
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5480
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5484
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5502
msgid "Import SLA archive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5566 src/slic3r/GUI/Plater.cpp:5576
msgid "does not contain valid gcode."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5567 src/slic3r/GUI/Plater.cpp:5577
msgid "Error while loading .gcode file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5644
#, c-format, boost-format
msgid "%s - Multiple projects file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5654
msgid "There are several files being loaded, including Project files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5654 src/slic3r/GUI/Plater.cpp:5657
msgid "Select an action to apply to all files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5657
msgid "There are several files being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5659 src/slic3r/GUI/Plater.cpp:6053
msgid "Action"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5680
msgid "Import geometry"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5693 src/slic3r/GUI/Plater.cpp:6045
msgid "Start new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5707
msgid "Select one to load as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5718
msgid "Select one to load config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5820
#, boost-format
msgid "Failed to unzip file to %1%: %2% "
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5829
#, boost-format
msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6032
#, c-format, boost-format
msgid "%s - Load project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6041
msgid "Open as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6042
msgid "Import geometry only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6043
msgid "Import config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6048
msgid "Select an action to apply to the file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6069
msgid "Don't show again"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6110
msgid "You can open only one .gcode file at a time."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6111
msgid "Drag and drop G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6203
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6208
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6258
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6269
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6278
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6312
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6363
msgid "Enter the number of copies:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6364
msgid "Copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6368
#, c-format, boost-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6381
msgid "Fill bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6517
msgid "Save G-code file as:"
msgstr "G kodu dosyasını farklı kaydet:"

#: src/slic3r/GUI/Plater.cpp:6517
msgid "Save SL1 / SL1S file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6530
msgid "The provided file name is not valid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6531
msgid "The following characters are not allowed by a FAT file system:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6725
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6725
msgid "Save project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6959
msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6959 src/slic3r/GUI/PrintHostDialogs.cpp:131
msgid "Upload and Print"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:7354
msgid "Export"
msgstr "Dışa Aktar"

#: src/slic3r/GUI/Plater.cpp:7386
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"repairing the mesh."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:7500
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:243 src/slic3r/GUI/Tab.cpp:2272
#: src/slic3r/GUI/Tab.cpp:2503 src/slic3r/GUI/Tab.cpp:2615
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1326
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1878
msgid "General"
msgstr "Genel"

#: src/slic3r/GUI/Preferences.cpp:261
msgid "Remember output directory"
msgstr "Çıkış dizinini hatırla"

#: src/slic3r/GUI/Preferences.cpp:262
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"Bu etkinse, Slic3r giriş dosyalarını içeren yerine son çıkış dizinini "
"soracaktır."

#: src/slic3r/GUI/Preferences.cpp:266
msgid "Auto-center parts"
msgstr "Parçaları otomatik ortala"

#: src/slic3r/GUI/Preferences.cpp:267
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""
"Bu etkinse, Slic3r nesneleri tabla merkezinin çevresinde otomatik ortalar."

#: src/slic3r/GUI/Preferences.cpp:271
msgid "Background processing"
msgstr "Arkaplan işleme"

#: src/slic3r/GUI/Preferences.cpp:272
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"Bu etkinse, Slic3r, G kodunu dışa aktarırken zaman kazanmak için nesneleri "
"yüklendikleri anda işleme koyar."

#: src/slic3r/GUI/Preferences.cpp:277
msgid "Alert when supports needed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:278
msgid ""
"If this is enabled, Slic3r will raise alerts when it detects issues in the "
"sliced object, that can be resolved with supports (and brim). Examples of "
"such issues are floating object parts, unsupported extrusions and low bed "
"adhesion."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:288
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:289
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:296
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:301
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:310
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Etkinleştirilirse Slic3r, arka planda yerleşik sistem ön ayarları "
"güncelleştirmelerini indirir. Bu güncellemeler ayrı bir geçici konuma "
"indirilir. Yeni önceden ayarlanmış bir sürüm kullanıma sunulduğunda, "
"uygulama başlangıcında sunulur."

#: src/slic3r/GUI/Preferences.cpp:315
msgid "Suppress \" - default - \" presets"
msgstr "\\ \"- varsayılan - \" ön ayarları bastır"

#: src/slic3r/GUI/Preferences.cpp:316
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"Kullanılabilir başka geçerli hazır ayarlar bulunduğunda, Yazdır / Filament / "
"Yazıcı seçimlerinde \\ \"- varsayılan - \" hazır ayarlarını bastırın."

#: src/slic3r/GUI/Preferences.cpp:320
msgid "Suppress \" Template \" filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:321
msgid ""
"Suppress \" Template \" filament presets in configuration wizard and sidebar "
"visibility."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:325
msgid "Show incompatible print and filament presets"
msgstr "Uyumsuz baskı ve filament hazır ayarları göster"

#: src/slic3r/GUI/Preferences.cpp:326
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"İşaretlendiğinde, yazdırma ve filament hazır ayarları, etkin yazıcıyla "
"uyumsuz olarak işaretlenmiş olsalar bile hazır ayar düzenleyicisinde "
"gösterilir"

#: src/slic3r/GUI/Preferences.cpp:334
msgid "Show load project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:335
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application or open it from a browser, shows a dialog asking to select the "
"action to take on the file to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:338
msgid "Show drop project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:339
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application, shows a dialog asking to select the action to take on the file "
"to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:345 src/slic3r/GUI/Preferences.cpp:349
msgid "Allow just a single PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:346
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:350
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:358
msgid ""
"Always ask for unsaved changes in project, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:366
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:925
msgid ""
"Ask to save unsaved changes in presets when closing the application or when "
"loading a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:367
msgid ""
"Always ask for unsaved changes in presets, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:373
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:924
msgid "Ask for unsaved changes in presets when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:374
msgid ""
"Always ask for unsaved changes in presets when selecting new preset or "
"resetting a preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:378
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:923
msgid "Ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:379
msgid "Always ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:385
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:386
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:393
msgid "Use Retina resolution for the 3D scene"
msgstr "3B sahne için Retina çözünürlüğünü kullan"

#: src/slic3r/GUI/Preferences.cpp:394
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"Etkinleştirilirse, 3D sahne Retina çözünürlüğünde oluşturulur. 3B performans "
"sorunları yaşıyorsanız, bu seçeneğin devre dışı bırakılması yardımcı "
"olabilir."

#: src/slic3r/GUI/Preferences.cpp:403 src/slic3r/GUI/Preferences.cpp:404
msgid "Show splash screen"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:409
msgid "If enabled, PrusaSlicer will be open at the position it was closed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:414
msgid "Clear Undo / Redo stack on new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:415
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:420
msgid "Enable support for legacy 3DConnexion devices"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:421
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:428
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:438
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:439
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:443
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:444
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:448
msgid "Reverse direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:449
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:455
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:496
msgid "Sequential slider applied only to top layer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:497
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer.If disabled, changes made using the sequential slider, in "
"preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:503
msgid "Show sidebar collapse/expand button"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:504
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:515
msgid "Use colors for axes values in Manipulation panel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:516
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:521
msgid "Order object volumes by types"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:522
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:527
msgid "Show non-manifold edges"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:528
msgid "If enabled, shows non-manifold edges."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:532
msgid "Allow automatically color change"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:533
msgid ""
"If enabled, related notification will be shown, when sliced object looks "
"like a logo or a sign."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:538
msgid "Set settings tabs as menu items (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:539
msgid ""
"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
"will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:546
msgid "Show \"Tip of the day\" notification after start"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:547
msgid "If enabled, useful hints are displayed at startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:551
msgid "Notify about new releases"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:552
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:556
msgid "Release only"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:561
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:562
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:580 src/slic3r/GUI/Tab.cpp:1641
#: src/slic3r/GUI/Tab.cpp:1667
msgid "Other"
msgstr "Diğer"

#: src/slic3r/GUI/Preferences.cpp:597
msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:603
msgid "Allow downloads from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:604
msgid "If enabled, PrusaSlicer will allow to download from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:613
msgid "Render"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:623
msgid "Use environment map"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:624
msgid "If enabled, renders object using the environment map."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:632
msgid "Dark mode (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:642
msgid "Enable dark mode"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:643
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:650
msgid "Use system menu for application"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:651
msgid ""
"If enabled, application will use the standart Windows system menu,\n"
"but on some combination od display scales it can look ugly. If disabled, old "
"UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:728
msgid "Changes for the critical options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:730
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:930
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:945
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:982
msgid "Layout Options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:991
msgid "Old regular layout with the tab bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:992
msgid "New layout, access via settings button in the top menu"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:993
msgid "Settings in non-modal window"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1035
msgid "Text colors"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1059
msgid "Mode markers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:254
#: src/slic3r/GUI/PresetComboBoxes.cpp:306
#: src/slic3r/GUI/PresetComboBoxes.cpp:846
#: src/slic3r/GUI/PresetComboBoxes.cpp:909
#: src/slic3r/GUI/PresetComboBoxes.cpp:1073
#: src/slic3r/GUI/PresetComboBoxes.cpp:1125
msgid "System presets"
msgstr "Sistem ön ayarları"

#: src/slic3r/GUI/PresetComboBoxes.cpp:310
#: src/slic3r/GUI/PresetComboBoxes.cpp:915
#: src/slic3r/GUI/PresetComboBoxes.cpp:1130
msgid "User presets"
msgstr "Kullanıcı ön ayarları"

#: src/slic3r/GUI/PresetComboBoxes.cpp:321
msgid "Incompatible presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:364
#, boost-format
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:366
msgid "Delete Physical Printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:612
msgid "Click to edit preset"
msgstr "Hazır ayarı düzenlemek için tıklayın"

#: src/slic3r/GUI/PresetComboBoxes.cpp:740
#: src/slic3r/GUI/PresetComboBoxes.cpp:788
msgid "Add/Remove presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:745
#: src/slic3r/GUI/PresetComboBoxes.cpp:793 src/slic3r/GUI/Tab.cpp:3310
msgid "Add physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:759
msgid "Edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:765
msgid "Change extruder color"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:773 src/slic3r/GUI/Tab.cpp:3310
msgid "Edit physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:779
msgid "Open physical printer URL"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:784
msgid "Delete physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:924
#: src/slic3r/GUI/PresetComboBoxes.cpp:1142
msgid "Template presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:935
#: src/slic3r/GUI/PresetComboBoxes.cpp:1156
msgid "Physical printers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:959
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:961
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:963
#: src/slic3r/GUI/PresetComboBoxes.cpp:1180
msgid "Add/Remove printers"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:32
#, boost-format
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""
"Tahmini katman süresi ~%1%s'nin altındaysa, fan %2%%% oranında çalışır ve "
"baskı hızı düşürülür, böylece bu katmana %3%s'den az harcanmaz (ancak hız "
"asla %4%mm/s altına düşürülmez)."

#: src/slic3r/GUI/PresetHints.cpp:40
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:44
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
#, boost-format
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "During the other layers, fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "Fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:59
#, boost-format
msgid "except for the first %1% layers."
msgstr "ilk %1% katman hariç."

#: src/slic3r/GUI/PresetHints.cpp:61
msgid "except for the first layer."
msgstr "ilk katman hariç."

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "During the other layers, fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "Fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:170
msgid "external perimeters"
msgstr "dış duvar"

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "perimeters"
msgstr "duvarlar"

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr "dolgu"

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "solid infill"
msgstr "katı dolgu"

#: src/slic3r/GUI/PresetHints.cpp:178
msgid "top solid infill"
msgstr "üst katı dolgu"

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "support"
msgstr "destek"

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "support interface"
msgstr "destek bağlantısı"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "First layer volumetric"
msgstr "İlk katman hacimsel"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Bridging volumetric"
msgstr "Hacimsel köprüleme"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Volumetric"
msgstr "Volumetrik"

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "flow rate is maximized"
msgstr "akış hızı en üst seviyeye ayarlandı"

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "by the print profile maximum"
msgstr "en yüksek baskı profiline göre"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "when printing"
msgstr "yazdırırken"

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "with a volumetric rate"
msgstr "hacimsel oranda"

#: src/slic3r/GUI/PresetHints.cpp:197
#, c-format, boost-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr "%3.2f mm³/s filament hızında %3.2f mm/s."

#: src/slic3r/GUI/PresetHints.cpp:215
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""
"Önerilen nesne duvar kalınlığı: Geçersiz katman yüksekliği nedeniyle mevcut "
"değil."

#: src/slic3r/GUI/PresetHints.cpp:221
#, c-format, boost-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr "Katman yüksekliği %.2f için önerilen duvar kalınlığı"

#: src/slic3r/GUI/PresetHints.cpp:236
#, c-format, boost-format
msgid "%d lines: %.2f mm"
msgstr "%d sıra: %.2f mm"

#: src/slic3r/GUI/PresetHints.cpp:240
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:282
#, boost-format
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:285
#, boost-format
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:288
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:301
#, boost-format
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:304
#, boost-format
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:307
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Send G-Code to printer host"
msgstr "G-Kodunu yazıcı ana bilgisayarına gönderin"

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Upload to Printer Host with the following filename:"
msgstr "Aşağıdaki dosya adıyla Yazıcı Ana Bilgisayarına yükleyin:"

#: src/slic3r/GUI/PrintHostDialogs.cpp:54
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr "Gerekirse, eğik çizgi (/) işlevini dizin ayırıcı olarak kullanın."

#: src/slic3r/GUI/PrintHostDialogs.cpp:63
msgid "Group"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:73
msgid "Upload to storage:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:82
msgid "Upload to storage: "
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:104
#, c-format, boost-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:111
msgid "Upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:121
msgid "Upload to Queue"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:142
msgid "Upload and Simulate"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:297
msgid "ID"
msgstr "İD"

#: src/slic3r/GUI/PrintHostDialogs.cpp:298
msgid "Progress"
msgstr "İlerleme"

#: src/slic3r/GUI/PrintHostDialogs.cpp:299
msgid "Status"
msgstr "Durum"

#: src/slic3r/GUI/PrintHostDialogs.cpp:300
msgid "Host"
msgstr "Sunucu"

#: src/slic3r/GUI/PrintHostDialogs.cpp:301
msgctxt "OfFile"
msgid "Size"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:302
msgid "Filename"
msgstr "Dosya adı"

#: src/slic3r/GUI/PrintHostDialogs.cpp:303
msgid "Message"
msgstr "İleti"

#: src/slic3r/GUI/PrintHostDialogs.cpp:307
msgid "Cancel selected"
msgstr "Seçileni iptal et"

#: src/slic3r/GUI/PrintHostDialogs.cpp:309
msgid "Show error message"
msgstr "Hata mesajını göster"

#: src/slic3r/GUI/PrintHostDialogs.cpp:367
#: src/slic3r/GUI/PrintHostDialogs.cpp:422
msgid "Enqueued"
msgstr "Sıraya alındı"

#: src/slic3r/GUI/PrintHostDialogs.cpp:423
msgid "Uploading"
msgstr "Yükleme"

#: src/slic3r/GUI/PrintHostDialogs.cpp:425
msgid "Cancelling"
msgstr "İptal ediliyor"

#: src/slic3r/GUI/PrintHostDialogs.cpp:426
msgid "Cancelled"
msgstr "İptal edildi"

#: src/slic3r/GUI/PrintHostDialogs.cpp:427
msgid "Completed"
msgstr "Tamamlandı"

#: src/slic3r/GUI/PrintHostDialogs.cpp:475
msgid "Error uploading to print host:"
msgstr "Ana makineye yüklerken hata oluştu:"

#: src/slic3r/GUI/RammingChart.cpp:29
msgid "NO RAMMING AT ALL"
msgstr "TÜMÜNDE SIKIŞTIRMA YOK"

#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:116
#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1059
#: src/libslic3r/PrintConfig.cpp:1074 src/libslic3r/PrintConfig.cpp:3617
#: src/libslic3r/PrintConfig.cpp:3626 src/libslic3r/PrintConfig.cpp:3635
#: src/libslic3r/PrintConfig.cpp:3785 src/libslic3r/PrintConfig.cpp:3793
#: src/libslic3r/PrintConfig.cpp:3801 src/libslic3r/PrintConfig.cpp:3808
#: src/libslic3r/PrintConfig.cpp:3816 src/libslic3r/PrintConfig.cpp:3824
msgid "s"
msgstr "s"

#: src/slic3r/GUI/RammingChart.cpp:95
msgid "Volumetric speed"
msgstr "Hacimsel hız"

#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:972
#: src/libslic3r/PrintConfig.cpp:1865
msgid "mm³/s"
msgstr "mm³/sn"

#: src/slic3r/GUI/SavePresetDialog.cpp:90
#, c-format, boost-format
msgid "Rename %s to:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:90
#, c-format, boost-format
msgid "Save %s as:"
msgstr "%s şu şekilde kaydet:"

#: src/slic3r/GUI/SavePresetDialog.cpp:165
#: src/slic3r/GUI/SavePresetDialog.cpp:173
msgid "The supplied name is not valid;"
msgstr "Sağlanan ad geçerli değil;"

#: src/slic3r/GUI/SavePresetDialog.cpp:174
msgid "the following suffix is not allowed:"
msgstr "aşağıdaki son eke izin verilmiyor:"

#: src/slic3r/GUI/SavePresetDialog.cpp:180
msgid "The supplied name is not available."
msgstr "Verilen isim mevcut değil."

#: src/slic3r/GUI/SavePresetDialog.cpp:186
msgid "The supplied name is used for a system profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:187
msgid "Cannot overwrite a system profile."
msgstr "Bir sistem profilinin üzerine yazılamaz."

#: src/slic3r/GUI/SavePresetDialog.cpp:192
msgid "The supplied name is used for a external profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:193
msgid "Cannot overwrite an external profile."
msgstr "Harici bir profilin üzerine yazılamaz."

#: src/slic3r/GUI/SavePresetDialog.cpp:203
msgid "Save preset modifications to existing user profile"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:205
msgid "Nothing changed"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:210
#, boost-format
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:212
#, boost-format
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:213
msgid "Note: This preset will be replaced after saving"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:219
msgid "The name cannot be empty."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:230
msgid "The name is too long."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:235
msgid "The name cannot start with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:240
msgid "The name cannot end with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:245
msgid "The name cannot be the same as a preset alias name."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:289
msgid "Save preset"
msgstr "Ön ayarı kaydet"

#: src/slic3r/GUI/SavePresetDialog.cpp:295
msgid "Save presets"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:302
msgid "Rename preset"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:327
msgctxt "PresetName"
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:347
msgid "Save as profile derived from current printer only."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:407
#, boost-format
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:446
#, boost-format
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:449
#, boost-format
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:450
#, boost-format
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:451
#, boost-format
msgid "Just switch to \"%1%\" preset"
msgstr ""

#: src/slic3r/GUI/Search.cpp:96 src/slic3r/GUI/Search.cpp:390
#: src/slic3r/GUI/Tab.cpp:2643
msgid "Stealth"
msgstr "Gizli"

#: src/slic3r/GUI/Search.cpp:96 src/slic3r/GUI/Search.cpp:390
#: src/slic3r/GUI/Tab.cpp:2637
msgid "Normal"
msgstr "Normal"

#: src/slic3r/GUI/Selection.cpp:180
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:221
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:253
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:272
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:290
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:309
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:406
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:431
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1344
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1717
msgid ""
"The currently manipulated object is tilted or contains tilted parts "
"(rotation angles are not multiples of 90°). Non-uniform scaling of tilted "
"objects is only possible in non-local coordinate systems, once the rotation "
"is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1720
msgid "This operation is irreversible."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:117
msgid "Data to send"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:557
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:624
msgid "Send system info"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:587
#, boost-format
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:594
msgid "Is it safe?"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:596
#, boost-format
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:620
msgid "Show verbatim data that will be sent"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:622
msgid "Ask me next time"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:623
msgid "Do not send anything"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:709
msgid "System info sent successfully. Thank you."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:712
msgid "Sending system info failed!"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:719
msgid "Sending system info was cancelled."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:726
msgid "Sending system info..."
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:92
msgid "System Information"
msgstr "Sistem bilgisi"

#: src/slic3r/GUI/SysInfoDialog.cpp:160
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:172
msgid "Eigen vectorization supported:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:179
msgid "Copy to Clipboard"
msgstr "Panoya Kopyala"

#: src/slic3r/GUI/Tab.cpp:68 src/libslic3r/PrintConfig.cpp:623
msgid "Compatible printers"
msgstr "Uyumlu yazıcılar"

#: src/slic3r/GUI/Tab.cpp:69
msgid "Select the printers this profile is compatible with."
msgstr "Bu profilin uyumlu olduğu yazıcıları seç."

#: src/slic3r/GUI/Tab.cpp:74 src/libslic3r/PrintConfig.cpp:638
msgid "Compatible print profiles"
msgstr "Uyumlu baskı profilleri"

#: src/slic3r/GUI/Tab.cpp:75
msgid "Select the print profiles this profile is compatible with."
msgstr "Bu profilin uyumlu olduğu baskı profillerini seçin."

#: src/slic3r/GUI/Tab.cpp:165
msgid "Compare this preset with some another"
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:167
#, c-format, boost-format
msgid "Save current %s"
msgstr "Mevcut %s değerini kaydet"

#: src/slic3r/GUI/Tab.cpp:168
#, c-format, boost-format
msgid "Rename current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:170
msgid "Delete this preset"
msgstr "Bu hazır ayarı sil"

#: src/slic3r/GUI/Tab.cpp:174
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"Daha fazla bilgi bulmak için imleci düğmelerin üzerine getirin \\ veya bu "
"düğmeye tıklayın."

#: src/slic3r/GUI/Tab.cpp:178
#, boost-format
msgid "Search in settings [%1%]"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1243
msgid "Detach from system preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1256
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1257
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1260
msgid "Modifications to the current profile will be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1266
msgid "Detach preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1292
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1294
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1296
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1300
msgid "Current preset is inherited from"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1304
msgid "It can't be deleted or modified."
msgstr "Silinemez veya değiştirilemez."

#: src/slic3r/GUI/Tab.cpp:1305
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""
"Herhangi bir değişiklik, bundan devralınan yeni bir ön ayar olarak "
"kaydedilmelidir."

#: src/slic3r/GUI/Tab.cpp:1306
msgid "To do that please specify a new name for the preset."
msgstr "Bunu yapmak için lütfen hazır ayar için yeni bir ad belirtin."

#: src/slic3r/GUI/Tab.cpp:1310
msgid "Additional information:"
msgstr "Ek bilgi:"

#: src/slic3r/GUI/Tab.cpp:1316
msgid "printer model"
msgstr "yazıcı modeli"

#: src/slic3r/GUI/Tab.cpp:1324
msgid "default print profile"
msgstr "varsayılan yazdırma profili"

#: src/slic3r/GUI/Tab.cpp:1327
msgid "default filament profile"
msgstr "varsayılan filament profili"

#: src/slic3r/GUI/Tab.cpp:1341
msgid "default SLA material profile"
msgstr "varsayılan SLA malzeme profili"

#: src/slic3r/GUI/Tab.cpp:1345
msgid "default SLA print profile"
msgstr "varsayılan SLA yazdırma profili"

#: src/slic3r/GUI/Tab.cpp:1353
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1354
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1392 src/slic3r/GUI/Tab.cpp:4938
msgid "Layers and perimeters"
msgstr "Katmanlar ve duvarlar"

#: src/slic3r/GUI/Tab.cpp:1398
msgid "Vertical shells"
msgstr "Duvar sayısı"

#: src/slic3r/GUI/Tab.cpp:1410
msgid "Horizontal shells"
msgstr "Yatay katmanlar"

#: src/slic3r/GUI/Tab.cpp:1411 src/libslic3r/PrintConfig.cpp:2456
msgid "Solid layers"
msgstr "Katı katmanlar"

#: src/slic3r/GUI/Tab.cpp:1416
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1427
msgid "Quality (slower slicing)"
msgstr "Kalite (daha yavaş dilimleme)"

#: src/slic3r/GUI/Tab.cpp:1445
msgid "Fuzzy skin (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1468
msgid "Reducing printing time"
msgstr "Baskı süresine etki eden ayarlar"

#: src/slic3r/GUI/Tab.cpp:1483
msgid "Skirt"
msgstr "Etek (Skirt)"

#: src/slic3r/GUI/Tab.cpp:1505
msgid "Raft"
msgstr "Alt Destek (Raft)"

#: src/slic3r/GUI/Tab.cpp:1510
msgid "Options for support material and raft"
msgstr "Destek ve alt destek (raft) için seçenekler"

#: src/slic3r/GUI/Tab.cpp:1529
msgid "Tree supports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1538
msgid "Speed for print moves"
msgstr "Baskı esnasında kullanılacak hızlar"

#: src/slic3r/GUI/Tab.cpp:1551
msgid "Dynamic overhang speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1565
msgid "Speed for non-print moves"
msgstr "Baskı haricinde kullanılacak hızlar"

#: src/slic3r/GUI/Tab.cpp:1569
msgid "Modifiers"
msgstr "Düzenleyiciler"

#: src/slic3r/GUI/Tab.cpp:1573
msgid "Acceleration control (advanced)"
msgstr "Hızlanma kontrolü (gelişmiş)"

#: src/slic3r/GUI/Tab.cpp:1581
msgid "Autospeed (advanced)"
msgstr "Otomatik hız (gelişmiş)"

#: src/slic3r/GUI/Tab.cpp:1585
msgid "Pressure equalizer (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1589
msgid "Multiple Extruders"
msgstr "Çoklu Ekstrüder"

#: src/slic3r/GUI/Tab.cpp:1597
msgid "Ooze prevention"
msgstr "Sızıntı önleme"

#: src/slic3r/GUI/Tab.cpp:1601
msgid "Wipe tower"
msgstr "Temizleme kulesi"

#: src/slic3r/GUI/Tab.cpp:1617
msgid "Extrusion width"
msgstr "Ekstrüzyon genişliği"

#: src/slic3r/GUI/Tab.cpp:1627
msgid "Overlap"
msgstr "Üzerine bindirme"

#: src/slic3r/GUI/Tab.cpp:1630
msgid "Flow"
msgstr "Akış"

#: src/slic3r/GUI/Tab.cpp:1644
msgid "Arachne perimeter generator"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1652 src/slic3r/GUI/Tab.cpp:4988
msgid "Output options"
msgstr "Çıktı seçenekleri"

#: src/slic3r/GUI/Tab.cpp:1653
msgid "Sequential printing"
msgstr "Sıralı baskı"

#: src/slic3r/GUI/Tab.cpp:1655
msgid "Extruder clearance"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1660 src/slic3r/GUI/Tab.cpp:4989
msgid "Output file"
msgstr "Çıktı dosyası"

#: src/slic3r/GUI/Tab.cpp:1679 src/libslic3r/PrintConfig.cpp:2075
msgid "Post-processing scripts"
msgstr "İşlem sonrası komut dosyaları"

#: src/slic3r/GUI/Tab.cpp:1691 src/slic3r/GUI/Tab.cpp:1692
#: src/slic3r/GUI/Tab.cpp:2083 src/slic3r/GUI/Tab.cpp:2084
#: src/slic3r/GUI/Tab.cpp:2484 src/slic3r/GUI/Tab.cpp:2485
#: src/slic3r/GUI/Tab.cpp:2562 src/slic3r/GUI/Tab.cpp:2563
#: src/slic3r/GUI/Tab.cpp:4180 src/slic3r/GUI/Tab.cpp:4820
#: src/slic3r/GUI/Tab.cpp:4821
msgid "Notes"
msgstr "Notlar"

#: src/slic3r/GUI/Tab.cpp:1698 src/slic3r/GUI/Tab.cpp:2091
#: src/slic3r/GUI/Tab.cpp:2491 src/slic3r/GUI/Tab.cpp:2569
#: src/slic3r/GUI/Tab.cpp:4828 src/slic3r/GUI/Tab.cpp:4994
msgid "Dependencies"
msgstr "Bağımlılıklar"

#: src/slic3r/GUI/Tab.cpp:1699 src/slic3r/GUI/Tab.cpp:2092
#: src/slic3r/GUI/Tab.cpp:2492 src/slic3r/GUI/Tab.cpp:2570
#: src/slic3r/GUI/Tab.cpp:4829 src/slic3r/GUI/Tab.cpp:4995
msgid "Profile dependencies"
msgstr "Profil bağımlılıkları"

#: src/slic3r/GUI/Tab.cpp:1731
msgid "Post processing scripts shall modify G-code file in place."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1812
#, c-format, boost-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:1817
msgid "Found reserved keywords in"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1879
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1880 src/slic3r/GUI/Tab.cpp:2825
msgid "Retraction"
msgstr "Geri çekme"

#: src/slic3r/GUI/Tab.cpp:1961
msgid "Temperature"
msgstr "Sıcaklık"

#: src/slic3r/GUI/Tab.cpp:1965
msgid "Nozzle"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1970
msgid "Bed"
msgstr "Tabla"

#: src/slic3r/GUI/Tab.cpp:1975
msgid "Cooling"
msgstr "Soğutma"

#: src/slic3r/GUI/Tab.cpp:1977 src/libslic3r/PrintConfig.cpp:1979
#: src/libslic3r/PrintConfig.cpp:3101
msgid "Enable"
msgstr "Etkin"

#: src/slic3r/GUI/Tab.cpp:1988
msgid "Fan settings"
msgstr "Fan ayarları"

#: src/slic3r/GUI/Tab.cpp:1989
msgid "Fan speed"
msgstr "Fan hızı"

#: src/slic3r/GUI/Tab.cpp:1999
msgid "Cooling thresholds"
msgstr "Soğutma eşikleri"

#: src/slic3r/GUI/Tab.cpp:2005
msgid "Filament properties"
msgstr "Filament özellikleri"

#: src/slic3r/GUI/Tab.cpp:2012
msgid "Print speed override"
msgstr "Baskı hızı geçersiz kılma"

#: src/slic3r/GUI/Tab.cpp:2022
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2025
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""
"Tek ekstrüder Çoklu Filament (MM) yazıcılarla takım değiştirme parametreleri"

#: src/slic3r/GUI/Tab.cpp:2038
msgid "Ramming settings"
msgstr "Sıkıştırma ayarları"

#: src/slic3r/GUI/Tab.cpp:2062 src/slic3r/GUI/Tab.cpp:2396
#: src/slic3r/GUI/Tab.cpp:4491 src/libslic3r/GCode.cpp:680
#: src/libslic3r/PrintConfig.cpp:2540
msgid "Custom G-code"
msgstr "Özel G-code"

#: src/slic3r/GUI/Tab.cpp:2063 src/slic3r/GUI/Tab.cpp:2397
#: src/libslic3r/GCode.cpp:654 src/libslic3r/PrintConfig.cpp:2490
#: src/libslic3r/PrintConfig.cpp:2505
msgid "Start G-code"
msgstr "Başlangıç G-code"

#: src/slic3r/GUI/Tab.cpp:2073 src/slic3r/GUI/Tab.cpp:2407
#: src/libslic3r/GCode.cpp:655 src/libslic3r/PrintConfig.cpp:743
#: src/libslic3r/PrintConfig.cpp:753
msgid "End G-code"
msgstr "Bitiş G-code"

#: src/slic3r/GUI/Tab.cpp:2118
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2239
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2273 src/slic3r/GUI/Tab.cpp:2504
msgid "Size and coordinates"
msgstr "Boyut ve koordinatlar"

#: src/slic3r/GUI/Tab.cpp:2282 src/slic3r/GUI/UnsavedChangesDialog.cpp:1326
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1878
msgid "Capabilities"
msgstr "Kabiliyetler"

#: src/slic3r/GUI/Tab.cpp:2287
msgid "Number of extruders of the printer."
msgstr "Yazıcının ekstrüder sayısı."

#: src/slic3r/GUI/Tab.cpp:2320
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2324 src/slic3r/GUI/Tab.cpp:2712
#: src/libslic3r/PrintConfig.cpp:1941
msgid "Nozzle diameter"
msgstr "Nozül çapı"

#: src/slic3r/GUI/Tab.cpp:2417 src/libslic3r/GCode.cpp:656
#: src/libslic3r/PrintConfig.cpp:449
msgid "Before layer change G-code"
msgstr "Katman değiştirmeden önce G-code"

#: src/slic3r/GUI/Tab.cpp:2427 src/libslic3r/GCode.cpp:657
#: src/libslic3r/PrintConfig.cpp:1667
msgid "After layer change G-code"
msgstr "Katman değişiminden sonra G-code"

#: src/slic3r/GUI/Tab.cpp:2437 src/libslic3r/GCode.cpp:658
#: src/libslic3r/PrintConfig.cpp:2984
msgid "Tool change G-code"
msgstr "Takım değiştirme G kodu"

#: src/slic3r/GUI/Tab.cpp:2447 src/libslic3r/GCode.cpp:659
msgid "Between objects G-code (for sequential printing)"
msgstr "Nesneler arasında Gcode (sıralı baskı için)"

#: src/slic3r/GUI/Tab.cpp:2457 src/libslic3r/GCode.cpp:660
msgid "Color Change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2466 src/libslic3r/GCode.cpp:661
#: src/libslic3r/PrintConfig.cpp:2531
msgid "Pause Print G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2475 src/libslic3r/GCode.cpp:662
msgid "Template Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2511
msgid "Display"
msgstr "Ekran"

#: src/slic3r/GUI/Tab.cpp:2526
msgid "Tilt"
msgstr "Eğim"

#: src/slic3r/GUI/Tab.cpp:2527
msgid "Tilt time"
msgstr "Yatırma zamanı"

#: src/slic3r/GUI/Tab.cpp:2534 src/slic3r/GUI/Tab.cpp:4810
msgid "Corrections"
msgstr "Düzeltmeler"

#: src/slic3r/GUI/Tab.cpp:2547 src/slic3r/GUI/Tab.cpp:4806
msgid "Exposure"
msgstr "Poz"

#: src/slic3r/GUI/Tab.cpp:2554
msgid "Output"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2613 src/slic3r/GUI/Tab.cpp:2873
#: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/PrintConfig.cpp:1731
#: src/libslic3r/PrintConfig.cpp:1748 src/libslic3r/PrintConfig.cpp:1765
#: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:1791
#: src/libslic3r/PrintConfig.cpp:1801 src/libslic3r/PrintConfig.cpp:1814
#: src/libslic3r/PrintConfig.cpp:1824
msgid "Machine limits"
msgstr "Makine sınırları"

#: src/slic3r/GUI/Tab.cpp:2636
msgid "Values in this column are for Normal mode"
msgstr "Bu sütundaki değerler Normal mod içindir"

#: src/slic3r/GUI/Tab.cpp:2642
msgid "Values in this column are for Stealth mode"
msgstr "Bu sütundaki değerler Gizli mod içindir"

#: src/slic3r/GUI/Tab.cpp:2651
msgid "Maximum feedrates"
msgstr "En yüksek hızlar"

#: src/slic3r/GUI/Tab.cpp:2656
msgid "Maximum accelerations"
msgstr "En yüksek ivme (Acceleration)"

#: src/slic3r/GUI/Tab.cpp:2665
msgid "Jerk limits"
msgstr "Ani Hareket (Jerk) sınırları"

#: src/slic3r/GUI/Tab.cpp:2671
msgid "Minimum feedrates"
msgstr "En düşük besleme hızı"

#: src/slic3r/GUI/Tab.cpp:2709
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2737
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2773
msgid "Apply below setting to other extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2818
msgid "Layer height limits"
msgstr "Katman yüksekliği sınırları"

#: src/slic3r/GUI/Tab.cpp:2822
msgid "Position (for multi-extruder printers)"
msgstr "Konum (çoklu ekstrüder yazıcıları için)"

#: src/slic3r/GUI/Tab.cpp:2828
msgid "Only lift Z"
msgstr "Koşullu Z kaldırma"

#: src/slic3r/GUI/Tab.cpp:2841
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""
"Takım devre dışı bırakıldığında geri çekme (çoklu ekstrüder ayarları için "
"gelişmiş ayarlar)"

#: src/slic3r/GUI/Tab.cpp:2898 src/slic3r/GUI/Tab.cpp:2907
msgid "Single extruder MM setup"
msgstr "Tek ekstrüder çoklu filament kurulumu"

#: src/slic3r/GUI/Tab.cpp:2908
msgid "Single extruder multimaterial parameters"
msgstr "Tek ekstrüder çok yönlü parametreler"

#: src/slic3r/GUI/Tab.cpp:3072
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"Donanımsal Geri Çekme kullanırken Temizleme seçeneği kullanılamaz.\n"
"\n"
"Donanımsal Geri Çekmeyi etkinleştirmek için Temizleme seçeneğini kapatmamı "
"iste misiniz?"

#: src/slic3r/GUI/Tab.cpp:3074
msgid "Firmware Retraction"
msgstr "Firmware Retraction"

#: src/slic3r/GUI/Tab.cpp:3382
msgid "New printer preset selected"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3756
msgid "Detached"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3855
msgid ""
"The physical printer below is based on the preset, you are going to rename."
msgid_plural ""
"The physical printers below are based on the preset, you are going to rename."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3860
msgid "Note, that the selected preset will be renamed in this printer too."
msgid_plural ""
"Note, that the selected preset will be renamed in these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3922
msgid "remove"
msgstr "kaldır"

#: src/slic3r/GUI/Tab.cpp:3922
msgid "delete"
msgstr "sil"

#: src/slic3r/GUI/Tab.cpp:3931
msgid "It's a last preset for this physical printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3936
#, boost-format
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3948
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3953
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3958
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3963
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3968
#, boost-format
msgid "Are you sure you want to %1% the selected preset?"
msgstr "%1% ayarını seçili ön ayar yapmak istediğinizden emin misiniz?"

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3973
#, boost-format
msgid "%1% Preset"
msgstr "%1% Ön Ayar"

#: src/slic3r/GUI/Tab.cpp:4059 src/slic3r/GUI/Tab.cpp:4421
msgid "Set"
msgstr "Ayarla"

#: src/slic3r/GUI/Tab.cpp:4178
msgid "Find"
msgstr "Bul"

#: src/slic3r/GUI/Tab.cpp:4179
msgid "Replace with"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4268
msgid "Regular expression"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4272
msgid "Case insensitive"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4276
msgid "Whole word"
msgstr "Tam kelime"

#: src/slic3r/GUI/Tab.cpp:4280
msgid "Match single line"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4383
msgid "Are you sure you want to delete all substitutions?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4519
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4522
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4526
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4548
msgid "LOCKED LOCK"
msgstr "KAPALI KİLİT"

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4550
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4552
msgid "UNLOCKED LOCK"
msgstr "AÇIK KİLİT"

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4554
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4559
msgid "WHITE BULLET"
msgstr "BEYAZ NOKTA"

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:4561
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4564
msgid "BACK ARROW"
msgstr "GERİ OK"

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:4566
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"ayarların değiştirildiğini ve mevcut seçenek grubunun son kaydedilen ön "
"ayarına eşit olmadığını gösterir.\n"
"Geçerli seçenek grubunun tüm ayarlarını en son kaydedilen ön ayara "
"sıfırlamak için GERİ OK tuşuna basın."

#: src/slic3r/GUI/Tab.cpp:4576
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4578
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4581
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4584
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""
"BEYAZ NOKTA simgesi ayarların geçerli seçenek grubu için en son kaydedilen "
"ön ayardakiyle aynı olduğunu gösterir."

#: src/slic3r/GUI/Tab.cpp:4586
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"GERİ OK simgesi ayarların değiştirildiğini ve geçerli seçenek grubunun son "
"kaydedilen ön ayarına eşit olmadığını gösterir.\n"
"Geçerli seçenek grubunun tüm ayarlarını en son kaydedilen ön ayara "
"sıfırlamak için tıklayın."

#: src/slic3r/GUI/Tab.cpp:4592
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4593
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4599
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""
"BEYAZ NOKTA simgesi, değerin son kaydedilen ön ayardakiyle aynı olduğunu "
"gösterir."

#: src/slic3r/GUI/Tab.cpp:4600
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"GERİ OK simgesi, değerin değiştirildiğini ve en son kaydedilen ön ayara eşit "
"olmadığını gösterir.\n"
"Geçerli değeri son kaydedilen ön ayara sıfırlamak için tıklayın."

#: src/slic3r/GUI/Tab.cpp:4762 src/slic3r/GUI/Tab.cpp:4764
msgid "Material"
msgstr "Malzeme"

#: src/slic3r/GUI/Tab.cpp:4849 src/slic3r/GUI/Tab.cpp:4850
msgid "Material printing profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4899
msgid "Support head"
msgstr "Destek kafa"

#: src/slic3r/GUI/Tab.cpp:4904
msgid "Support pillar"
msgstr "Destek ayağı"

#: src/slic3r/GUI/Tab.cpp:4927
msgid "Connection of the support sticks and junctions"
msgstr "Destek çubuklarının ve birleşimlerinin bağlantısı"

#: src/slic3r/GUI/Tab.cpp:4954
msgid "Automatic generation"
msgstr "Otomatik oluşturma"

#: src/slic3r/GUI/Tab.cpp:5022
#, boost-format
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5024 src/libslic3r/PrintConfig.cpp:3544
msgid "Object elevation"
msgstr "Nesne yüksekliği"

#: src/slic3r/GUI/Tab.cpp:5024 src/libslic3r/PrintConfig.cpp:4012
msgid "Pad around object"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:147
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:156
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:165
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1075
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1128
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1143
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1158
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1173
msgid "Undef"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:792
msgid "Unsaved Changes"
msgstr "Kaydedilmemiş Değişiklikler"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:810
msgid "Switching Presets: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:858
msgid "Original Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:859
msgid "Modified Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:861
msgid "New Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:892
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1593
msgid "Transfer"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
msgid "Don't save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:926
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"create new project"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:927
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"switch a preset"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:928
msgid ""
"You will not be asked about the unsaved changes in presets the next time "
"you: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:931
msgid "PrusaSlicer will remember your action."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:932
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:964
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1796
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:966
msgid "All settings changes will not be saved"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:966
msgid "All settings changes will be discarded."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
msgid "Save the selected options."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:970
msgid "Keep the selected settings."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:971
msgid "Transfer the selected settings to the newly selected preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:975
#, boost-format
msgid "Save the selected options to preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:976
#, boost-format
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1261
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1267
#, boost-format
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1271
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1272
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1321
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1874
msgid "Extruders count"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1350
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1539
msgid "Show all presets (including incompatible)"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1557
msgid "Select presets to compare"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1569
msgid "Left Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1570
msgid "Right Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1619
msgid ""
"Transfer the selected options from left preset to the right.\n"
"Note: New modified presets will be selected in setting stabs after close "
"this dialog."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1627
msgid "Save the selected options from left preset to the right."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1645
msgid "Transfer values from left to right"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1646
msgid ""
"If enabled, this dialog can be used for transver selected values from left "
"to right preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1831
msgid "One of the presets doesn't found"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1842
msgid "Compared presets has different printer technology"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1856
msgid "Presets are the same"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1864
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1888
msgid "Undef category"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1888
msgid "Undef group"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2040
msgid "Modified"
msgstr "Değişiklik"

#: src/slic3r/GUI/UpdateDialogs.cpp:41
msgid "Update available"
msgstr "Güncelleme uygun"

#: src/slic3r/GUI/UpdateDialogs.cpp:41
#, c-format, boost-format
msgid "New version of %s is available"
msgstr "%s yeni sürümü mevcut"

#: src/slic3r/GUI/UpdateDialogs.cpp:46 src/slic3r/GUI/UpdateDialogs.cpp:101
msgid "Current version:"
msgstr "Mevcut sürüm:"

#: src/slic3r/GUI/UpdateDialogs.cpp:48 src/slic3r/GUI/UpdateDialogs.cpp:103
#: src/slic3r/GUI/UpdateDialogs.cpp:141
msgid "New version:"
msgstr "Yeni sürüm:"

#: src/slic3r/GUI/UpdateDialogs.cpp:56
msgid "Changelog & Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:63 src/slic3r/GUI/UpdateDialogs.cpp:309
#: src/slic3r/GUI/UpdateDialogs.cpp:367
msgid "Open changelog page"
msgstr "Değişiklik sayfasını aç"

#: src/slic3r/GUI/UpdateDialogs.cpp:69
msgid "Open download page"
msgstr "İndirme sayfasını aç"

#: src/slic3r/GUI/UpdateDialogs.cpp:76 src/slic3r/GUI/UpdateDialogs.cpp:109
msgid "Don't notify about new releases any more"
msgstr "Artık yeni sürümlerden haberdar etme"

#: src/slic3r/GUI/UpdateDialogs.cpp:98
msgid "App Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:98
#, c-format, boost-format
msgid ""
"New version of %s is available.\n"
"Do you wish to download it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
msgid "App Update download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
#, c-format, boost-format
msgid "New version of %s is available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:146
msgid "Run installer after download. (Otherwise file explorer will be opened)"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
msgid "Target directory:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:158
msgid "Select directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:176
msgid "Select directory:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:193
msgid "Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:204
msgid "Directory path is empty."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:212
msgid "Directory path is incorrect."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:217
#, boost-format
msgid "Directory %1% doesn't exists. Do you wish to create it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:222
msgid "Failed to create directory."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:229
#, boost-format
msgid "File %1% already exists. Do you wish to overwrite it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:234
#, boost-format
msgid "Download path is %1%. Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270
msgid "Opening Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270 src/slic3r/GUI/UpdateDialogs.cpp:437
msgid "Configuration update"
msgstr "Yapılandırma güncelleme"

#: src/slic3r/GUI/UpdateDialogs.cpp:271
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:273
msgid "Configuration update is available"
msgstr "Yapılandırma güncellemesi var"

#: src/slic3r/GUI/UpdateDialogs.cpp:276
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"Yüklemek ister misiniz?\n"
"\n"
"Önce tam bir yapılandırma görüntüsünün oluşturulacağını unutmayın. Yeni "
"sürümde bir sorun olması durumunda herhangi bir zamanda geri yüklenebilir.\n"
"\n"
"Güncelleme yapılandırma paketleri:"

#: src/slic3r/GUI/UpdateDialogs.cpp:297 src/slic3r/GUI/UpdateDialogs.cpp:357
msgid "Comment:"
msgstr "Yorum:"

#: src/slic3r/GUI/UpdateDialogs.cpp:318
msgid "Install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:320
msgid "Don't install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:333 src/slic3r/GUI/UpdateDialogs.cpp:388
#, c-format, boost-format
msgid "%s incompatibility"
msgstr "%s uyumsuzluğu"

#: src/slic3r/GUI/UpdateDialogs.cpp:333
msgid "You must install a configuration update."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:336
#, c-format, boost-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:389
#, c-format, boost-format
msgid "%s configuration is incompatible"
msgstr "%s yapılandırması uyumlu değil"

#: src/slic3r/GUI/UpdateDialogs.cpp:392
#, c-format, boost-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:401
#, c-format, boost-format
msgid "This %s version: %s"
msgstr "Bu %s versiyonu: %s"

#: src/slic3r/GUI/UpdateDialogs.cpp:406
msgid "Incompatible bundles:"
msgstr "Uyumsuz paketler:"

#: src/slic3r/GUI/UpdateDialogs.cpp:422
msgid "Re-configure"
msgstr "Yeniden yapılandır"

#: src/slic3r/GUI/UpdateDialogs.cpp:441
#, c-format, boost-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"%s şimdi güncellenmiş bir konfigürasyon yapısı kullanıyor.\n"
"\n"
"Çeşitli yazıcılar için yerleşik varsayılan ayarları tutan 'Sistem ön "
"ayarları' adı verilen bir sistem tanıtıldı. Bu Sistem ön ayarları "
"değiştirilemez, bunun yerine, kullanıcılar artık Sistem ön ayarlarından "
"birinden ayarları devralarak kendi ön ayarlarını oluşturabilir.\n"
"Bir ön ayarın devralınması, üst öğesinden belirli bir değeri devralabilir "
"veya özelleştirilmiş bir değerle geçersiz kılabilir.\n"
"\n"
"Lütfen yeni hazır ayarları ayarlamak ve otomatik hazır ayar "
"güncellemelerinin etkinleştirilip etkinleştirilmeyeceğini seçmek için %s ile "
"devam edin."

#: src/slic3r/GUI/UpdateDialogs.cpp:458
msgid "For more information please visit our wiki page:"
msgstr "Daha fazla bilgi için lütfen wiki sayfamızı ziyaret edin:"

#: src/slic3r/GUI/UpdateDialogs.cpp:475
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:475 src/slic3r/GUI/UpdateDialogs.cpp:495
msgid "No updates available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:480
#, c-format, boost-format
msgid "%s has no configuration updates available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:495
msgid "App update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:500
#, c-format, boost-format
msgid "%s has no version updates available."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:23
msgid "Ramming customization"
msgstr "Sıkıştırma özelleştirme"

#: src/slic3r/GUI/WipeTowerDialog.cpp:56
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"Sıkıştırma, tek bir ekstrüder ile çoklu filament kullanan yazıcıda bir "
"filament değişikliğinden hemen önce hızlı ekstrüzyon işlemidir. Amacı, "
"boşaltılmamış filamentin sonunu düzgün bir şekilde biçimlendirmektir, "
"böylece yeni filamentin yerleştirilmesini engellemez ve daha sonra yeniden "
"yerleştirilebilir. Bu işlem önemlidir ve farklı malzemeler iyi bir şekil "
"elde etmek için farklı ekstrüzyon hızları gerektirebilir. Bu nedenle, "
"sıkıştırma sırasında ekstrüzyon hızları ayarlanabilir.\n"
"\n"
"Bu uzman düzeyinde bir ayardır, yanlış ayarlamalar sıkışmalara, ekstrüder "
"çarkının filamenti taşlanmasına vb. sebep olabilir."

#: src/slic3r/GUI/WipeTowerDialog.cpp:116
msgid "Total ramming time"
msgstr "Toplam sıkıştırma süresi"

#: src/slic3r/GUI/WipeTowerDialog.cpp:118
msgid "Total rammed volume"
msgstr "Toplam sıkıştırma hacmi"

#: src/slic3r/GUI/WipeTowerDialog.cpp:122
msgid "Ramming line width"
msgstr "Sıkıştırma genişliği"

#: src/slic3r/GUI/WipeTowerDialog.cpp:124
msgid "Ramming line spacing"
msgstr "Sıkıştırma satır boşluğu"

#: src/slic3r/GUI/WipeTowerDialog.cpp:175
msgid "Wipe tower - Purging volume adjustment"
msgstr "Temizleme kulesi - Boşaltma hacmi ayarı"

#: src/slic3r/GUI/WipeTowerDialog.cpp:301
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""
"Burada, herhangi bir takım çifti için gerekli temizleme hacmini (mm³) "
"ayarlayabilirsiniz."

#: src/slic3r/GUI/WipeTowerDialog.cpp:302
msgid "Extruder changed to"
msgstr "Ekstrüder şuna değiştirildi"

#: src/slic3r/GUI/WipeTowerDialog.cpp:310
msgid "unloaded"
msgstr "kaldırıldı"

#: src/slic3r/GUI/WipeTowerDialog.cpp:311
msgid "loaded"
msgstr "yüklü"

#: src/slic3r/GUI/WipeTowerDialog.cpp:354
msgid "Tool #"
msgstr "Araç #"

#: src/slic3r/GUI/WipeTowerDialog.cpp:363
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""
"Toplam temizleme hacmi, hangi araçların yüklü / boşaltıldığına bağlı olarak "
"aşağıdaki iki değer toplanarak hesaplanır."

#: src/slic3r/GUI/WipeTowerDialog.cpp:364
msgid "Volume to purge (mm³) when the filament is being"
msgstr "Filament olurken temizlenecek hacim (mm³)"

#: src/slic3r/GUI/WipeTowerDialog.cpp:378
msgid "From"
msgstr "From"

#: src/slic3r/GUI/WipeTowerDialog.cpp:444
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"Basit ayarlara geçmek, gelişmiş modda yapılan değişiklikleri iptal eder! \n"
"\n"
"Devam etmek ister misiniz?"

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show simplified settings"
msgstr "Basitleştirilmiş ayarları göster"

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show advanced settings"
msgstr "Gelişmiş ayarları göster"

#: src/slic3r/GUI/wxExtensions.cpp:672
#, c-format, boost-format
msgid "Switch to the %s mode"
msgstr "%s moda geç"

#: src/slic3r/GUI/wxExtensions.cpp:673
#, c-format, boost-format
msgid "Current mode is %s"
msgstr "Geçerli mod %s"

#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:206
#: src/slic3r/Utils/OctoPrint.cpp:255 src/slic3r/Utils/OctoPrint.cpp:667
#: src/slic3r/Utils/OctoPrint.cpp:814 src/slic3r/Utils/OctoPrint.cpp:887
#: src/slic3r/Utils/Repetier.cpp:88
#, c-format, boost-format
msgid "Mismatched type of print host: %s"
msgstr "Eşleşmeyen baskı sunucusu türü: %s"

#: src/slic3r/Utils/AstroBox.cpp:84
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:90
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:92
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr "Duet ile bağlantı düzgün çalışıyor."

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr "Duet ile bağlantı kurulamadı"

#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:157
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr "Bilinmeyen bir hata oluştu"

#: src/slic3r/Utils/Duet.cpp:151
msgid "Wrong password"
msgstr "Yanlış şifre"

#: src/slic3r/Utils/Duet.cpp:154
msgid "Could not get resources to create a new connection"
msgstr "Yeni bir bağlantı oluşturmak için kaynaklar alınamadı"

#: src/slic3r/Utils/FixModelByWin10.cpp:221
#: src/slic3r/Utils/FixModelByWin10.cpp:361
msgid "Exporting source model"
msgstr "Kaynak model dışa aktarılıyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:237
msgid "Failed loading the input model."
msgstr "Giriş modeli yüklenemedi."

#: src/slic3r/Utils/FixModelByWin10.cpp:244
msgid "Repairing model by the Netfabb service"
msgstr "Netfabb servisi tarafından tamir modeli"

#: src/slic3r/Utils/FixModelByWin10.cpp:250
msgid "Mesh repair failed."
msgstr "Ağ onarımı başarısız oldu."

#: src/slic3r/Utils/FixModelByWin10.cpp:253
#: src/slic3r/Utils/FixModelByWin10.cpp:388
msgid "Loading repaired model"
msgstr "Onarılan model yükleniyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:265
#: src/slic3r/Utils/FixModelByWin10.cpp:272
#: src/slic3r/Utils/FixModelByWin10.cpp:303
msgid "Saving mesh into the 3MF container failed."
msgstr "3MF kabına ağ kaydetme işlemi başarısız oldu."

#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Export of a temporary 3mf file failed"
msgstr "Geçici 3MF dosyasına dışa aktarım başarısız oldu"

#: src/slic3r/Utils/FixModelByWin10.cpp:394
msgid "Import of the repaired 3mf file failed"
msgstr "Onarılmış 3mf dosyasının içe aktarılması başarısız oldu"

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Repaired 3MF file does not contain any object"
msgstr "Onarılmış 3MF dosyası herhangi bir nesne içermiyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:398
msgid "Repaired 3MF file contains more than one object"
msgstr "Onarılmış 3MF dosyası birden fazla nesne içeriyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Repaired 3MF file does not contain any volume"
msgstr "Onarılmış 3MF dosyası herhangi bir birim içermiyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:402
msgid "Repaired 3MF file contains more than one volume"
msgstr "Onarılmış 3MF dosyası birden fazla cilt içeriyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:412
msgid "Model repair finished"
msgstr "Model onarımı bitti"

#: src/slic3r/Utils/FixModelByWin10.cpp:418
msgid "Model repair canceled"
msgstr "Model onarımı iptal edildi"

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:74
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:76
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:279
msgid "Connection to OctoPrint works correctly."
msgstr "OctoPrint ile bağlantı düzgün çalışıyor."

#: src/slic3r/Utils/OctoPrint.cpp:285
msgid "Could not connect to OctoPrint"
msgstr "OctoPrint ile bağlantı kurulamadı"

#: src/slic3r/Utils/OctoPrint.cpp:287
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "Not: OctoPrint sürümü en az 1.1.0 gereklidir."

#: src/slic3r/Utils/OctoPrint.cpp:529
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:535
msgid "Could not connect to Prusa SLA"
msgstr "Prusa SLA ile bağlantı kurulamadı"

#: src/slic3r/Utils/OctoPrint.cpp:574
msgid "Connection to PrusaLink works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:580
msgid "Could not connect to PrusaLink"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:766
msgid "Storages found:"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:768
msgid "read only"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:768
msgid "no free space"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:771
#, boost-format
msgid "Upload has failed. There is no suitable storage found at %1%.%2%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:64
#, boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:998
#: src/slic3r/Utils/PresetUpdater.cpp:1015
msgid "Continue and install configuration updates?"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1021
msgid "Installing profiles"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1071
#, boost-format
msgid "Downloading resources for %1%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1171
msgid ""
"Configuration Updates causes a lost of preset modification.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1173
msgid "Updating"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1202
#, c-format, boost-format
msgid "requires min. %s and max. %s"
msgstr "en az %s ve en çok %s gerektirir"

#: src/slic3r/Utils/PresetUpdater.cpp:1206
#, c-format, boost-format
msgid "requires min. %s"
msgstr "en az %s gerektirir"

#: src/slic3r/Utils/PresetUpdater.cpp:1209
#, c-format, boost-format
msgid "requires max. %s"
msgstr "en çok %s gerektirir"

#: src/slic3r/Utils/PresetUpdater.cpp:1362
#, boost-format
msgid "Couldn't locate idx file %1% when performing updates."
msgstr ""

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""

#: src/slic3r/Utils/Http.cpp:78
#, boost-format
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""

#: src/slic3r/Utils/Http.cpp:82
#, boost-format
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""

#: src/slic3r/Utils/Process.cpp:164
msgid "Open G-code file:"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:103
msgid "Connection to Repetier works correctly."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:109
msgid "Could not connect to Repetier"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:111
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:263
#, boost-format
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:270
#, boost-format
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:283
#, boost-format
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:584
msgid "Taking a configuration snapshot failed."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:598
msgid ""
"PrusaSlicer has encountered an error while taking a configuration snapshot."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:599
msgid "PrusaSlicer error"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Continue"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Abort"
msgstr ""

#: src/libslic3r/GCode.cpp:486
msgid "There is an object with no extrusions in the first layer."
msgstr ""

#: src/libslic3r/GCode.cpp:517
#, boost-format
msgid "Empty layer between %1% and %2%."
msgstr ""

#: src/libslic3r/GCode.cpp:520
msgid "(Some lines not shown)"
msgstr ""

#: src/libslic3r/GCode.cpp:522
#, boost-format
msgid "Object name: %1%"
msgstr ""

#: src/libslic3r/GCode.cpp:523
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""

#: src/libslic3r/GCode.cpp:665
msgid "Filament Start G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:672
msgid "Filament End G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:713
msgid "In the custom G-code were found reserved keywords:"
msgstr ""

#: src/libslic3r/GCode.cpp:715
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr ""

#: src/libslic3r/GCode.cpp:1116 src/libslic3r/GCode.cpp:1127
msgid "No extrusions were generated for objects."
msgstr ""

#: src/libslic3r/GCode.cpp:1320
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""

#: src/libslic3r/Flow.cpp:61
#, boost-format
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1900
#, boost-format
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1911
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1915
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1919
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:1010
#, boost-format
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/GCode/PostProcessor.cpp:289
#, boost-format
msgid ""
"Post-processing script %1% failed.\n"
"\n"
"The post-processing script is expected to change the G-code file %2% in "
"place, but the G-code file was deleted and likely saved under a new name.\n"
"Please adjust the post-processing script to change the G-code in place and "
"consult the manual on how to optionally rename the post-processed G-code "
"file.\n"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr "tanımsız hata"

#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr "çok fazla dosya"

#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr "dosya çok büyük"

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr "desteklenmeyen yöntem"

#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr "desteklenmeyen şifreleme"

#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr "desteklenmeyen özellik"

#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr "merkez dizini bulamadı"

#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr "dosya ZIP değil"

#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr "geçersiz başlık veya arşiv bozuk"

#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr "desteklenmeyen multidisk arşivi"

#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr "açma işlemi başarısız oldu veya arşiv bozuk"

#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr "sıkıştırma başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr "beklenmeyen sıkıştırılmış boyut"

#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr "CRC-32 kontrolü başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr "desteklenmeyen merkezi dizin boyutu"

#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr "tahsis başarısız"

#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr "dosya açılamadı"

#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr "dosya oluşturma başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr "dosya yazımı başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr "dosya okunamadı"

#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr "dosya kapatılamadı"

#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr "dosya arama başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr "dosya statüsü başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr "geçersiz parametre"

#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr "geçersiz dosya adı"

#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr "arabellek çok küçük"

#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr "iç hata"

#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr "dosya bulunamadı"

#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr "arşiv çok büyük"

#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr "doğrulama başarısız"

#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr "geri arama yazma başarısız oldu"

#: src/libslic3r/Print.cpp:465
msgid "All objects are outside of the print volume."
msgstr "Tüm nesneler baskı hacminin dışında."

#: src/libslic3r/Print.cpp:468
msgid "The supplied settings will cause an empty print."
msgstr "Verilen ayarlar boş yazdırmaya neden olur."

#: src/libslic3r/Print.cpp:472
msgid "Some objects are too close; your extruder will collide with them."
msgstr "Bazı nesneler çok yakın; Ekstrüderiniz onlarla çarpışacaktır."

#: src/libslic3r/Print.cpp:474
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr "Bazı nesneler çok uzun ve ekstrüder çarpışmaları olmadan basılamaz."

#: src/libslic3r/Print.cpp:483
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""

#: src/libslic3r/Print.cpp:487
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""
"Spiral Vazo seçeneği, yalnızca tek malzeme nesnelerini yazdırırken "
"kullanılabilir."

#: src/libslic3r/Print.cpp:500
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:506
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
"RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:508
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""
"Temizleme Kulesi şu anda yalnızca göreceli ekstrüder adreslemesi ile "
"desteklenmektedir (use_relative_e_distances = 1)."

#: src/libslic3r/Print.cpp:510
msgid ""
"Ooze prevention is only supported with the wipe tower when "
"'single_extruder_multi_material' is off."
msgstr ""

#: src/libslic3r/Print.cpp:512
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:514
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:535
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""
"Temizleme Kulesi, yalnızca eşit katman yüksekliğine sahipse birden çok nesne "
"için desteklenir"

#: src/libslic3r/Print.cpp:537
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""
"Temizleme Kulesi, yalnızca eşit sayıda sal katmanın üzerine basıldıysa, "
"yalnızca birden çok nesne için desteklenir"

#: src/libslic3r/Print.cpp:540
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"Temizleme Kulesi, yalnızca aynı support_material_contact_distance ile "
"yazdırılıyorsa, birden çok nesne için desteklenir"

#: src/libslic3r/Print.cpp:542
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""
"Temizleme Kulesi, yalnızca eşit şekilde dilimlenmeleri durumunda birden çok "
"nesne için desteklenir."

#: src/libslic3r/Print.cpp:566
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:590
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""
"Bir veya daha fazla nesneye, yazıcının sahip olmadığı bir ekstrüder "
"verilmiştir."

#: src/libslic3r/Print.cpp:603
#, boost-format
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:606
#, boost-format
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:617
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"Farklı nozül çaplarına sahip birden fazla ekstrüder ile baskı. Destek mevcut "
"ekstrüder ile basılacaksa (support_material_ekstrüder == 0 veya "
"support_material_interface_ekstrüder == 0), tüm nozullar aynı çapta "
"olmalıdır."

#: src/libslic3r/Print.cpp:625
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"Temizleme Kulesi'nin çözülebilir desteklerle çalışması için, destek "
"katmanlarının nesne katmanları ile senkronize edilmesi gerekir."

#: src/libslic3r/Print.cpp:629
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"Temizleme Kulesi şu anda çözülemeyen destekleri sadece bir takım "
"değişikliğini tetiklemeden mevcut ekstrüder ile basıldıysa desteklemektedir. "
"(Hem support_material_ekstrüder hem de support_material_interface_ekstrüder "
"0 olarak ayarlanmalıdır)."

#: src/libslic3r/Print.cpp:665
msgid "First layer height can't be greater than nozzle diameter"
msgstr "İlk katman yüksekliği nozül çapından büyük olamaz"

#: src/libslic3r/Print.cpp:670
msgid "Layer height can't be greater than nozzle diameter"
msgstr "Katman yüksekliği nozül çapından büyük olamaz"

#: src/libslic3r/Print.cpp:691
msgid ""
"Relative extruder addressing requires resetting the extruder position at "
"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
"layer_gcode."
msgstr ""

#: src/libslic3r/Print.cpp:693
msgid ""
"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
"absolute extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:695
msgid ""
"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
"extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:837
msgid "Infilling layers"
msgstr "Dolgu katmanları"

#: src/libslic3r/Print.cpp:865
msgid "Generating skirt and brim"
msgstr ""

#: src/libslic3r/Print.cpp:913
msgid "Exporting G-code"
msgstr "G-code dışa aktarılıyor"

#: src/libslic3r/Print.cpp:917
msgid "Generating G-code"
msgstr "G kodu oluşturma"

#: src/libslic3r/Print.cpp:1126
msgid "Alert if supports needed"
msgstr ""

#: src/libslic3r/Print.cpp:1131
msgid "long bridging extrusions"
msgstr ""

#: src/libslic3r/Print.cpp:1132
msgid "floating bridge anchors"
msgstr ""

#: src/libslic3r/Print.cpp:1135
msgid "collapsing overhang"
msgstr ""

#: src/libslic3r/Print.cpp:1137
msgid "loose extrusions"
msgstr ""

#: src/libslic3r/Print.cpp:1140
msgid "low bed adhesion"
msgstr ""

#: src/libslic3r/Print.cpp:1141
msgid "floating object part"
msgstr ""

#: src/libslic3r/Print.cpp:1142
msgid "thin fragile section"
msgstr ""

#: src/libslic3r/Print.cpp:1178
msgid "Detected print stability issues"
msgstr ""

#: src/libslic3r/Print.cpp:1193
msgid "Object"
msgstr ""

#: src/libslic3r/Print.cpp:1203
msgid "Consider enabling supports"
msgstr ""

#: src/libslic3r/Print.cpp:1203
msgid "and/or brim"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:533
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:546
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""
"Destek noktaları olmadan devam edemezsiniz! Destek noktaları ekleyin veya "
"destek oluşturmayı devre dışı bırakın."

#: src/libslic3r/SLAPrint.cpp:558
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:564
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:579
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:586
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:693
msgid "Slicing done"
msgstr "Dilimleme yapıldı"

#: src/libslic3r/SLAPrintSteps.cpp:57
msgid "Assembling model from parts"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:58
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:59
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:60
msgid "Slicing model"
msgstr "Dilimleme modeli"

#: src/libslic3r/SLAPrintSteps.cpp:61 src/libslic3r/SLAPrintSteps.cpp:691
msgid "Generating support points"
msgstr "Destek noktaları oluşturmak"

#: src/libslic3r/SLAPrintSteps.cpp:62
msgid "Generating support tree"
msgstr "Destek ağacı oluşturma"

#: src/libslic3r/SLAPrintSteps.cpp:63
msgid "Generating pad"
msgstr "Üreten ped"

#: src/libslic3r/SLAPrintSteps.cpp:64
msgid "Slicing supports"
msgstr "Dilimleme destekleri"

#: src/libslic3r/SLAPrintSteps.cpp:79
msgid "Merging slices and calculating statistics"
msgstr "Dilimleri birleştirme ve istatistik hesaplama"

#: src/libslic3r/SLAPrintSteps.cpp:80
msgid "Rasterizing layers"
msgstr "Rasterleştirme katmanları"

#: src/libslic3r/SLAPrintSteps.cpp:255
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:262
msgid "Unable to drill the current configuration of holes into the model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:271
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:279
msgid "Failed to drill some holes into the model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:289
msgid ""
"Can't perform full mesh booleans! Some parts of the print will be previewed "
"with approximated meshes. This does not affect the quality of slices or the "
"physical print in any way."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:510
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:740 src/libslic3r/SLAPrintSteps.cpp:749
#: src/libslic3r/SLAPrintSteps.cpp:787
msgid "Visualizing supports"
msgstr "Görselleştirme destekleri"

#: src/libslic3r/SLAPrintSteps.cpp:779
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:908
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:84
msgid "Failed processing of the output_filename_format template."
msgstr "Output_filename_format şablonunun işlenmesi başarısız oldu."

#: src/libslic3r/PrintConfig.cpp:253 src/libslic3r/PrintConfig.cpp:254
msgid "Printer technology"
msgstr "Yazıcı teknolojisi"

#: src/libslic3r/PrintConfig.cpp:261
msgid "Bed shape"
msgstr "Tabla şekli"

#: src/libslic3r/PrintConfig.cpp:266
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:271
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:276
msgid "Elephant foot compensation"
msgstr "Fil ayağı koruması"

#: src/libslic3r/PrintConfig.cpp:278
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"İlk katmanda ezilme, bir diğer ismiyle fil ayağı etkisini önlemek için ilk "
"katman XY düzleminde bu değer kadar küçültülecektir."

#: src/libslic3r/PrintConfig.cpp:286
msgid "G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:287
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
"following format: \"XxY, XxY, ...\""
msgstr ""

#: src/libslic3r/PrintConfig.cpp:293
msgid "Format of G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:294
msgid ""
"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
"QOI for low memory firmware"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:305
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"Bu ayar, dilimlerin / katmanların yüksekliğini (ve böylece toplam sayıyı) "
"kontrol eder. Daha ince katmanlar daha iyi doğruluk sağlar ancak yazdırması "
"daha uzun sürer."

#: src/libslic3r/PrintConfig.cpp:312
msgid "Max print height"
msgstr "En fazla baskı yüksekliği"

#: src/libslic3r/PrintConfig.cpp:313
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""
"Bunu, yazdırma sırasında ekstrüderinizin ulaşabileceği en fazla yüksekliğe "
"ayarlayın."

#: src/libslic3r/PrintConfig.cpp:321
msgid "Hostname, IP or URL"
msgstr "Ana bilgisayar adı, IP veya URL"

#: src/libslic3r/PrintConfig.cpp:322
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:331
msgid "API Key / Password"
msgstr "API Anahtarı / Şifre"

#: src/libslic3r/PrintConfig.cpp:332
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"Slic3r, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu "
"alan, API Anahtarını veya kimlik doğrulama için gereken şifreyi içermelidir."

#: src/libslic3r/PrintConfig.cpp:340
msgid "Name of the printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:348
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
"HTTPS OctoPrint bağlantıları için crt/pem biçiminde özel CA sertifika "
"dosyası belirtilebilir. Boş bırakılırsa, varsayılan OS CA sertifika "
"kullanılır."

#: src/libslic3r/PrintConfig.cpp:364
msgid "Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:372
msgid "Ignore HTTPS certificate revocation checks"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:373
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:380
msgid "Printer preset names"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:381
msgid "Names of presets related to the physical printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:386
msgid "Authorization Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:391
msgid "API key"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:392
msgid "HTTP digest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:411
msgid "Avoid crossing curled overhangs (Experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:412
msgid ""
"Plan travel moves such that the extruder avoids areas where the filament may "
"be curled up. This is mostly happening on steeper rounded overhangs and may "
"cause a crash with the nozzle. This feature slows down both the print and "
"the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:419
msgid "Avoid crossing perimeters"
msgstr "Yan duvarların üzerinden geçme"

#: src/libslic3r/PrintConfig.cpp:420
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"Nozülün duvarların üzerinden geçişini en aza indirmek için hareketleri "
"optimize eder. Bu çoğunlukla sızmaya maruz kalan Bowden ekstrüderleri ile "
"faydalıdır. Bu özellik hem yazdırmayı hem de G-code oluşumunu yavaşlatır."

#: src/libslic3r/PrintConfig.cpp:427
msgid "Avoid crossing perimeters - Max detour length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:429
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:432
msgid "mm or % (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:439 src/libslic3r/PrintConfig.cpp:2946
msgid "Other layers"
msgstr "Diğer katmanlar"

#: src/libslic3r/PrintConfig.cpp:440
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""
"İlk katman sonrasındaki katmanlar için tabla sıcaklığı. Tabla ısı kontrol "
"komutlarını devre dışı bırakmak için bunu sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:443
msgid "Bed temperature"
msgstr "Tabla sıcaklığı"

#: src/libslic3r/PrintConfig.cpp:450
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"Bu özel kod, Z hareketinden hemen önce her katman değişikliğinde eklenir. "
"Yer tutucu değişkenlerini tüm Slic3r ayarlarının yanı sıra [layer_num] ve "
"[layer_z] için kullanabileceğinizi unutmayın."

#: src/libslic3r/PrintConfig.cpp:460
msgid "Between objects G-code"
msgstr "Nesneler arasında G-code"

#: src/libslic3r/PrintConfig.cpp:461
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"Sıralı baskı kullanılırken bu kod nesneler arasına eklenir. Varsayılan "
"olarak ekstrüder ve tabla sıcaklığı, non-wait komutunu kullanarak "
"sıfırlanır; ancak bu özel kodda M104, M109, M140 veya M190 algılanırsa, "
"Slic3r sıcaklık komutları eklemeyecektir. Tüm Slic3r ayarları için yer "
"tutucu değişkenleri kullanabileceğinizi unutmayın, böylece istediğiniz yere "
"\\ \"M109 S [first_layer_temperature] \" komutunu koyabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:472
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "Alt yüzeylerde üretilecek katı katmanların sayısı."

#: src/libslic3r/PrintConfig.cpp:473
msgid "Bottom solid layers"
msgstr "Alt katı katman"

#: src/libslic3r/PrintConfig.cpp:481
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:483
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:489
msgid "Bridge"
msgstr "Köprü"

#: src/libslic3r/PrintConfig.cpp:490
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""
"Bu, yazıcınızın köprüler için kullanacağı hızlanmadır. Köprüler için "
"hızlanma kontrolünü devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:492 src/libslic3r/PrintConfig.cpp:697
#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1261
#: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:1754
#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1816
#: src/libslic3r/PrintConfig.cpp:1826 src/libslic3r/PrintConfig.cpp:2024
msgid "mm/s²"
msgstr "mm/s²"

#: src/libslic3r/PrintConfig.cpp:498
msgid "Bridging angle"
msgstr "Köprü açısı"

#: src/libslic3r/PrintConfig.cpp:500
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"Varsayılan köprü açısını geçersiz kılar. Sıfır olursa, köprü açısı otomatik "
"olarak hesaplanır. Aksi takdirde, verilen açı tüm köprüler için "
"kullanılacaktır. Sıfır açı için 180° kullanın."

#: src/libslic3r/PrintConfig.cpp:509
msgid "Bridges fan speed"
msgstr "Köprü fan hızı"

#: src/libslic3r/PrintConfig.cpp:510
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "Bu fan hızı tüm köprüler ve çıkıntılar sırasında uygulanır."

#: src/libslic3r/PrintConfig.cpp:511 src/libslic3r/PrintConfig.cpp:555
#: src/libslic3r/PrintConfig.cpp:1174 src/libslic3r/PrintConfig.cpp:1642
#: src/libslic3r/PrintConfig.cpp:1834 src/libslic3r/PrintConfig.cpp:1897
#: src/libslic3r/PrintConfig.cpp:2148 src/libslic3r/PrintConfig.cpp:2207
#: src/libslic3r/PrintConfig.cpp:2939 src/libslic3r/PrintConfig.cpp:3392
#: src/libslic3r/PrintConfig.cpp:3643 src/libslic3r/PrintConfig.cpp:3924
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:518
msgid "Bridge flow ratio"
msgstr "Köprü akış oranı"

#: src/libslic3r/PrintConfig.cpp:520
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"Bu faktör köprüleme için plastik miktarını etkiler. Ekstrüdatları çekmek ve "
"sarkmasını önlemek için hafifçe azaltabilirsiniz, bununla birlikte "
"varsayılan ayarlar genellikle iyidir ve ince ayar yapmadan önce soğutma (bir "
"fan kullanın) denemelisiniz."

#: src/libslic3r/PrintConfig.cpp:530
msgid "Bridges"
msgstr "Köprüler"

#: src/libslic3r/PrintConfig.cpp:532
msgid "Speed for printing bridges."
msgstr "Köprü yazdırma hızı."

#: src/libslic3r/PrintConfig.cpp:533 src/libslic3r/PrintConfig.cpp:980
#: src/libslic3r/PrintConfig.cpp:988 src/libslic3r/PrintConfig.cpp:997
#: src/libslic3r/PrintConfig.cpp:1005 src/libslic3r/PrintConfig.cpp:1032
#: src/libslic3r/PrintConfig.cpp:1051 src/libslic3r/PrintConfig.cpp:1389
#: src/libslic3r/PrintConfig.cpp:1579 src/libslic3r/PrintConfig.cpp:1661
#: src/libslic3r/PrintConfig.cpp:1737 src/libslic3r/PrintConfig.cpp:1771
#: src/libslic3r/PrintConfig.cpp:1783 src/libslic3r/PrintConfig.cpp:1793
#: src/libslic3r/PrintConfig.cpp:1856 src/libslic3r/PrintConfig.cpp:1915
#: src/libslic3r/PrintConfig.cpp:2055 src/libslic3r/PrintConfig.cpp:2282
#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2829
#: src/libslic3r/PrintConfig.cpp:3046 src/libslic3r/PrintConfig.cpp:3056
msgid "mm/s"
msgstr "mm/s"

#: src/libslic3r/PrintConfig.cpp:540
msgid "Enable dynamic overhang speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:542
msgid "This setting enables dynamic speed control on overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:547
msgid "Overhang overlap levels"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:549
msgid ""
"Controls overhang levels, expressed as a percentage of overlap of the "
"extrusion with the previous layer - 100% represents full overlap - no "
"overhang is present, while 0% represents full overhang (floating extrusion). "
"Each overhang level then corresponds with the overhang speed below. Speeds "
"for overhang levels in between are calculated via linear interpolation.If "
"you set multiple different speeds for the same overhang level, only the "
"largest speed is used. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:562
msgid "Dynamic speed on overhangs"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:564
msgid ""
"This setting controls the speed on the overhang with the overlap value set "
"above. The speed of the extrusion is calculated as a linear interpolation of "
"the speeds for higher and lower overlap. If set as percentage, the speed is "
"calculated over the external perimeter speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:568 src/libslic3r/PrintConfig.cpp:822
#: src/libslic3r/PrintConfig.cpp:1305 src/libslic3r/PrintConfig.cpp:1316
#: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:2448
#: src/libslic3r/PrintConfig.cpp:2780 src/libslic3r/PrintConfig.cpp:3016
msgid "mm/s or %"
msgstr "mm/s veya %"

#: src/libslic3r/PrintConfig.cpp:574
msgid "Brim width"
msgstr "Kenar genişliği"

#: src/libslic3r/PrintConfig.cpp:576
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:585
msgid "Brim type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:587
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:593
msgid "No brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:594
msgid "Outer brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:595
msgid "Inner brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:596
msgid "Outer and inner brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:601
msgid "Brim separation gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:603
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:610
msgid "Clip multi-part objects"
msgstr "Çok parçalı nesneleri kırp"

#: src/libslic3r/PrintConfig.cpp:611
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"Çok malzemeli nesneler yazdırırken, Slic3r çakışan nesne parçalarını birbiri "
"ardına kırpacaktır (ikinci parça birinci ile, üçüncü parça birinci ve ikinci "
"vb. ile kırpılacaktır)."

#: src/libslic3r/PrintConfig.cpp:618
msgid "Colorprint height"
msgstr "Renkli baskı yüksekliği"

#: src/libslic3r/PrintConfig.cpp:619
msgid "Heights at which a filament change is to occur."
msgstr "Bir filament değişiminin meydana geldiği yükseklikler."

#: src/libslic3r/PrintConfig.cpp:629
msgid "Compatible printers condition"
msgstr "Uyumlu yazıcılar durumu"

#: src/libslic3r/PrintConfig.cpp:630
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"Etkin bir yazıcı profilinin yapılandırma değerlerini kullanan bir boolean "
"ifadesi. Bu ifade doğru olarak değerlendirilirse, bu profil etkin yazıcı "
"profiliyle uyumlu olarak kabul edilir."

#: src/libslic3r/PrintConfig.cpp:644
msgid "Compatible print profiles condition"
msgstr "Uyumlu baskı profilleri koşulu"

#: src/libslic3r/PrintConfig.cpp:645
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"Aktif bir yazdırma profilinin yapılandırma değerlerini kullanan bir boolean "
"ifadesi. Bu ifade doğru olarak değerlendirilirse, bu profil aktif yazdırma "
"profiliyle uyumlu olarak kabul edilir."

#: src/libslic3r/PrintConfig.cpp:662
msgid "Complete individual objects"
msgstr "Tek tek nesneleri tamamla"

#: src/libslic3r/PrintConfig.cpp:663
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"Birden çok nesne veya kopya yazdırırken, bu özellik her nesneyi bir "
"sonrakine geçmeden önce tamamlar (ve onu alt katmanından başlatır). Bu "
"özellik, hatalı baskı riskini önlemek için kullanışlıdır. Slic3r sizi "
"ekstrüder çarpmalarına karşı uyarır ve önlem alır fakat yine de dikkatli "
"olun."

#: src/libslic3r/PrintConfig.cpp:671
msgid "Enable auto cooling"
msgstr "Otomatik soğutmayı etkinleştir"

#: src/libslic3r/PrintConfig.cpp:672
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""
"Bu bayrak, baskı hızını ve fan hızını katman baskı zamanına göre ayarlayan "
"otomatik soğutma mantığını etkinleştirir."

#: src/libslic3r/PrintConfig.cpp:677
msgid "Cooling tube position"
msgstr "Soğutma tüpü konumu"

#: src/libslic3r/PrintConfig.cpp:678
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "Soğutma tüpünün merkez noktasının ekstrüder ucundan mesafesi."

#: src/libslic3r/PrintConfig.cpp:685
msgid "Cooling tube length"
msgstr "Soğutma tüpü uzunluğu"

#: src/libslic3r/PrintConfig.cpp:686
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""
"Soğutma tüpünün içindeki hareketleri sınırlamak için soğutma tüpünün "
"uzunluğu."

#: src/libslic3r/PrintConfig.cpp:694
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"Özel hızlandırma değerleri kullanıldıktan sonra (duvar / dolgu) sıfırlanacak "
"olan ivmedir. Hızlanmayı sıfırlamayı önlemek için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:703
msgid "Default filament profile"
msgstr "Varsayılan filament profili"

#: src/libslic3r/PrintConfig.cpp:704
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"Geçerli yazıcı profiliyle ilişkilendirilmiş varsayılan filament profili. "
"Geçerli yazıcı profilinin seçilmesinde bu filament profili "
"etkinleştirilecektir."

#: src/libslic3r/PrintConfig.cpp:710
msgid "Default print profile"
msgstr "Varsayılan yazdırma profili"

#: src/libslic3r/PrintConfig.cpp:711 src/libslic3r/PrintConfig.cpp:3871
#: src/libslic3r/PrintConfig.cpp:3882
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"Geçerli yazıcı profiliyle ilişkilendirilmiş varsayılan yazdırma profili. "
"Geçerli yazıcı profili seçildiğinde, bu baskı profili etkinleştirilecektir."

#: src/libslic3r/PrintConfig.cpp:717
msgid "Disable fan for the first"
msgstr "Fanın devre dışı bırakılacağı katman sayısı"

#: src/libslic3r/PrintConfig.cpp:718
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"Bunu, ilk katmanlar sırasında fanı devre dışı bırakmak için pozitif bir "
"değere ayarlayabilirsiniz, böylece yapışma daha kötü olmaz."

#: src/libslic3r/PrintConfig.cpp:727
msgid "Don't support bridges"
msgstr "Köprüleri destekleme"

#: src/libslic3r/PrintConfig.cpp:729
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""
"Desteklerin köprülü alanlar altında oluşturulmasını önlemek için deneysel "
"seçenek."

#: src/libslic3r/PrintConfig.cpp:735
msgid "Distance between copies"
msgstr "Kopyalar arasındaki mesafe"

#: src/libslic3r/PrintConfig.cpp:736
msgid "Distance used for the auto-arrange feature of the plater."
msgstr "Tablanın otomatik düzenleme özelliği için kullanılan mesafesi."

#: src/libslic3r/PrintConfig.cpp:744
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:754
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:765
msgid "Ensure vertical shell thickness"
msgstr "Dikey kabuk kalınlığını sağlamlaştır"

#: src/libslic3r/PrintConfig.cpp:767
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""
"Dikey kabuk kalınlığını (üst + alt katı katmanlar) garanti altına almak için "
"eğimli yüzeylerin yanına katı dolgu ekler."

#: src/libslic3r/PrintConfig.cpp:773
msgid "Top fill pattern"
msgstr "Üst dolgu deseni"

#: src/libslic3r/PrintConfig.cpp:775
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""
"Üst dolgu deseni. Bu sadece üstteki görünür katmanı etkiler, bitişik katı "
"katmanları etkilemez."

#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:1229
#: src/libslic3r/PrintConfig.cpp:2794 src/libslic3r/PrintConfig.cpp:2811
msgid "Rectilinear"
msgstr "Düz çizgili"

#: src/libslic3r/PrintConfig.cpp:780
msgid "Monotonic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:781
msgid "Monotonic Lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:782 src/libslic3r/PrintConfig.cpp:1230
msgid "Aligned Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:783 src/libslic3r/PrintConfig.cpp:1236
#: src/libslic3r/PrintConfig.cpp:2812
msgid "Concentric"
msgstr "Ortak merkezli"

#: src/libslic3r/PrintConfig.cpp:784 src/libslic3r/PrintConfig.cpp:1240
msgid "Hilbert Curve"
msgstr "Hilbert Eğrisi"

#: src/libslic3r/PrintConfig.cpp:785 src/libslic3r/PrintConfig.cpp:1241
msgid "Archimedean Chords"
msgstr "Arşimet Akorları"

#: src/libslic3r/PrintConfig.cpp:786 src/libslic3r/PrintConfig.cpp:1242
msgid "Octagram Spiral"
msgstr "Octagram Spiral"

#: src/libslic3r/PrintConfig.cpp:794
msgid "Bottom fill pattern"
msgstr "Alt dolgu deseni"

#: src/libslic3r/PrintConfig.cpp:796
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""
"Alt dolgu deseni. Bu sadece alt dış görünür tabakayı etkiler, bitişik katı "
"katmanları etkilemez."

#: src/libslic3r/PrintConfig.cpp:805 src/libslic3r/PrintConfig.cpp:817
msgid "External perimeters"
msgstr "Dış duvar"

#: src/libslic3r/PrintConfig.cpp:807
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"Harici duvar için manuel ekstrüzyon genişliğini ayarlamak için bunu sıfır "
"olmayan bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı takdirde "
"varsayılan ekstrüzyon genişliği kullanılacaktır, aksi takdirde 1.125 x nozül "
"çapı kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% 200), katman "
"yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:810 src/libslic3r/PrintConfig.cpp:929
#: src/libslic3r/PrintConfig.cpp:1283 src/libslic3r/PrintConfig.cpp:1486
#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1570
#: src/libslic3r/PrintConfig.cpp:2044 src/libslic3r/PrintConfig.cpp:2436
#: src/libslic3r/PrintConfig.cpp:2611 src/libslic3r/PrintConfig.cpp:2700
#: src/libslic3r/PrintConfig.cpp:3002 src/libslic3r/PrintConfig.cpp:3224
#: src/libslic3r/PrintConfig.cpp:3239 src/libslic3r/PrintConfig.cpp:3273
#: src/libslic3r/PrintConfig.cpp:3285
msgid "mm or %"
msgstr "mm veya %"

#: src/libslic3r/PrintConfig.cpp:819
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Bu ayar harici duvar hızlarını (görünür olanları) etkiler. Yüzde olarak "
"ifade edilirse (örneğin:% 80), yukarıdaki duvar hız ayarında hesaplanır. "
"Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:829
msgid "External perimeters first"
msgstr "Önce dış duvarlar"

#: src/libslic3r/PrintConfig.cpp:831
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr "Duvarları önce en dıştan başlayarak en içe doğru basar."

#: src/libslic3r/PrintConfig.cpp:837
msgid "Extra perimeters if needed"
msgstr "Gerekirse fazladan duvar ekle"

#: src/libslic3r/PrintConfig.cpp:839
#, fuzzy, c-format, boost-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"Eğimli duvarlardaki boşlukları önlemek için gerektiğinde daha fazla duvar "
"ekler. Slic3r, hemen üstteki döngünün %70'inden fazlası desteklenene kadar "
"duvar eklemeye devam eder."

#: src/libslic3r/PrintConfig.cpp:846
msgid "Extra perimeters on overhangs (Experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:848
msgid ""
"Detect overhang areas where bridges cannot be anchored, and fill them with "
"extra perimeter paths. These paths are anchored to the nearby non-overhang "
"area when possible."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:857
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"Kullanılacak ekstrüder (daha spesifik ekstrüder ayarları belirtilmedikçe). "
"Bu değer, duvar ve dolgu ekstrüderlerini geçersiz kılar, ancak destek "
"ekstrüderlerini etkilemez."

#: src/libslic3r/PrintConfig.cpp:869
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"Bunu, nozül ucu ile (genellikle) X taşıyıcı çubukları arasındaki dikey "
"mesafeye ayarlayın. Başka bir deyişle, bu ekstrüderin etrafındaki boşaltma "
"silindirinin yüksekliğidir ve ekstrüderin diğer basılı nesnelerle "
"çarpışmadan önce gözetebileceği en fazla derinliği temsil eder."

#: src/libslic3r/PrintConfig.cpp:880
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"Bunu, ekstrüderinizin etrafındaki boşluk yarıçapına ayarlayın. Ekstrüder "
"ortalanmamışsa, güvenlik için en büyük değeri seçin. Bu ayar, çarpışmaları "
"kontrol etmek ve grafiksel ön izlemeyi tablada görüntülemek için kullanılır."

#: src/libslic3r/PrintConfig.cpp:890
msgid "Extruder Color"
msgstr "Ekstrüder Rengi"

#: src/libslic3r/PrintConfig.cpp:891 src/libslic3r/PrintConfig.cpp:954
#: src/libslic3r/PrintConfig.cpp:3714
msgid "This is only used in the Slic3r interface as a visual help."
msgstr "Bu sadece Slic3r arayüzünde görsel bir yardım olarak kullanılır."

#: src/libslic3r/PrintConfig.cpp:897
msgid "Extruder offset"
msgstr "Ekstrüder ofset"

#: src/libslic3r/PrintConfig.cpp:898
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"Ürün yazılımınız ekstrüder yer değiştirmesini işlemiyorsa, hesaba katmak "
"için G koduna ihtiyacınız vardır. Bu seçenek, her ekstrüderin birincisine "
"göre yer değiştirmesini belirtmenizi sağlar. Pozitif koordinatlar "
"girilmelidir (XY koordinatından çıkarılacaklar)."

#: src/libslic3r/PrintConfig.cpp:907
msgid "Extrusion axis"
msgstr "Ekstrüzyon ekseni"

#: src/libslic3r/PrintConfig.cpp:908
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"Yazıcınızın ekstrüderiyle ilişkili eksen harfini ayarlamak için bu seçeneği "
"kullanın (genellikle E ancak bazı yazıcılar A kullanır)."

#: src/libslic3r/PrintConfig.cpp:913
msgid "Extrusion multiplier"
msgstr "Ekstrüzyon çarpanı"

#: src/libslic3r/PrintConfig.cpp:914
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"Bu faktör, akış miktarını orantılı olarak değiştirir. Güzel yüzey kalitesi "
"elde etmek ve tek duvar genişliğini düzeltmek için bu ayarı ince ayar "
"yapmanız gerekebilir. Her zamanki değerler 0,9 ile 1,1 arasındadır. Bunu "
"daha fazla değiştirmeniz gerektiğini düşünüyorsanız, filament çapını ve ürün "
"yazılımı E adımlarınızı kontrol edin."

#: src/libslic3r/PrintConfig.cpp:923
msgid "Default extrusion width"
msgstr "Varsayılan ekstrüzyon genişliği"

#: src/libslic3r/PrintConfig.cpp:925
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"Manuel bir ekstrüzyon genişliği sağlamak için bunu sıfır olmayan bir değere "
"ayarlayın. Sıfır bırakılırsa Slic3r, nozül çapından ekstrüzyon "
"genişliklerini türetir (duvar ekstrüzyon genişliği, dolgu ekstrüzyon "
"genişliği vb. İçin araç ipuçlarına bakın). Yüzde olarak ifade edilirse "
"(örneğin:% 230), katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:937
msgid "Keep fan always on"
msgstr "Fanı daima açık tut"

#: src/libslic3r/PrintConfig.cpp:938
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"Bu etkinleştirilirse, fan hiçbir zaman devre dışı bırakılmaz ve en azından "
"en düşük hızında çalışmaya devam eder. PLA için faydalı, ABS için zararlı."

#: src/libslic3r/PrintConfig.cpp:943
msgid "Enable fan if layer print time is below"
msgstr "Katman yazdırma süresi bu değerin altındaysa fanı etkinleştir"

#: src/libslic3r/PrintConfig.cpp:944
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"Katman baskı süresi bu sürenin altında tahmin edilirse, fan etkinleşecek ve "
"hızı en az ve en fazla hızları kullanılarak hesaplanacaktır."

#: src/libslic3r/PrintConfig.cpp:946 src/libslic3r/PrintConfig.cpp:2383
msgid "approximate seconds"
msgstr "yaklaşık saniye"

#: src/libslic3r/PrintConfig.cpp:953 src/libslic3r/PrintConfig.cpp:3713
msgid "Color"
msgstr "Renk"

#: src/libslic3r/PrintConfig.cpp:959
msgid "Filament notes"
msgstr "Filament notları"

#: src/libslic3r/PrintConfig.cpp:960
msgid "You can put your notes regarding the filament here."
msgstr "Filament ile ilgili notlarınızı buraya yazabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:968 src/libslic3r/PrintConfig.cpp:1862
msgid "Max volumetric speed"
msgstr "En yüksek hacimsel hız"

#: src/libslic3r/PrintConfig.cpp:969
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"Bu filament için izin verilen en fazla hacimsel hız. Bir baskının en fazla "
"hacimsel hızını en düşük baskı ve filament hacimsel hızıyla sınırlandırır. "
"Limitsiz olarak sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:978
msgid "Loading speed"
msgstr "Yükleme hızı"

#: src/libslic3r/PrintConfig.cpp:979
msgid "Speed used for loading the filament on the wipe tower."
msgstr "Filamenti temizleme kulesi üzerinde yüklemek için kullanılan hız."

#: src/libslic3r/PrintConfig.cpp:986
msgid "Loading speed at the start"
msgstr "Başlangıçta yükleme hızı"

#: src/libslic3r/PrintConfig.cpp:987
msgid "Speed used at the very beginning of loading phase."
msgstr "Yükleme aşamasının başında kullanılan hız."

#: src/libslic3r/PrintConfig.cpp:994
msgid "Unloading speed"
msgstr "Boşaltma hızı"

#: src/libslic3r/PrintConfig.cpp:995
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""
"Temizleme kulesinde filamenti boşaltmak için kullanılan hız (boşaltmanın ilk "
"kısmını etkilemez)."

#: src/libslic3r/PrintConfig.cpp:1003
msgid "Unloading speed at the start"
msgstr "Başlangıçta boşaltma hızı"

#: src/libslic3r/PrintConfig.cpp:1004
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""
"Sıkıştırma işleminden hemen sonra filamentin ucunu boşaltmak için kullanılan "
"hız."

#: src/libslic3r/PrintConfig.cpp:1011
msgid "Delay after unloading"
msgstr "Boşaltma işleminden sonra gecikme"

#: src/libslic3r/PrintConfig.cpp:1012
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""
"Filament boşaltıldıktan sonra bekleme süresi. Orijinal boyutlarına küçültmek "
"için daha fazla zamana ihtiyaç duyan esnek malzemelerle güvenilir takım "
"değişimleri elde etmenize yardımcı olabilir."

#: src/libslic3r/PrintConfig.cpp:1021
msgid "Number of cooling moves"
msgstr "Soğutma hareketi sayısı"

#: src/libslic3r/PrintConfig.cpp:1022
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""
"Filament, soğutma tüplerinde ileri geri hareket ettirilerek soğutulur. Bu "
"hareketlerin istediğiniz sayısını belirtin."

#: src/libslic3r/PrintConfig.cpp:1030
msgid "Speed of the first cooling move"
msgstr "İlk soğutma hareketinin hızı"

#: src/libslic3r/PrintConfig.cpp:1031
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr "Soğutma hızı bu seviyeden başlayarak kademeli olarak artacaktır."

#: src/libslic3r/PrintConfig.cpp:1038
msgid "Minimal purge on wipe tower"
msgstr "Temizleme kulesinde en düşük temizleme"

#: src/libslic3r/PrintConfig.cpp:1039
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"Bir takım değişiminden sonra, yeni yüklenen filamentin tam konumu "
"bilinmeyebilir ve filament basıncı henüz sabit değildir. Nozülü bir dolgu "
"alanı veya gözden çıkarılmış bir nesne ile temizlemeden önce, Slic3r, arka "
"arkaya dolgulu veya gözden çıkarılmış nesne ekstrüzyonlarını güvenilir bir "
"şekilde üretmek için her zaman bu miktardaki malzemeyi temizleme kulesine "
"doldurur."

#: src/libslic3r/PrintConfig.cpp:1043
msgid "mm³"
msgstr "mm³"

#: src/libslic3r/PrintConfig.cpp:1049
msgid "Speed of the last cooling move"
msgstr "Son soğutma hareketinin hızı"

#: src/libslic3r/PrintConfig.cpp:1050
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr "Soğutma hızı yavaş yavaş bu hıza doğru artacaktır."

#: src/libslic3r/PrintConfig.cpp:1057
msgid "Filament load time"
msgstr "Filament yükleme süresi"

#: src/libslic3r/PrintConfig.cpp:1058
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Yazıcı yazılımının (veya Çok Malzemeli Ünite 2.0) takım değiştirme sırasında "
"(T kodu yürütülürken) yeni bir filament yükleme zamanı. Bu süre, G-code "
"zaman tahmincisi tarafından toplam yazdırma zamanına eklenir."

#: src/libslic3r/PrintConfig.cpp:1065
msgid "Ramming parameters"
msgstr "Sıkıştırma parametreleri"

#: src/libslic3r/PrintConfig.cpp:1066
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""
"Bu dize RammingDialog tarafından düzenlenmiştir ve sıkıştırma özel "
"parametrelerini içerir."

#: src/libslic3r/PrintConfig.cpp:1072
msgid "Filament unload time"
msgstr "Filament boşaltma süresi"

#: src/libslic3r/PrintConfig.cpp:1073
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Yazıcı yazılımının (veya Çok Malzemeli Birim 2.0) bir takım değişikliği "
"sırasında (T kodunu yürütürken) bir filamenti boşaltma süresi. Bu süre, G-"
"code zaman tahmincisi tarafından toplam yazdırma zamanına eklenir."

#: src/libslic3r/PrintConfig.cpp:1081
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"Filament çapınızı buraya girin. İyi bir hassasiyet gereklidir, bu nedenle "
"bir kumpas kullanın ve filament boyunca birçok ölçüm yapın, ardından "
"ortalamayı hesaplayın."

#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:3761
#: src/libslic3r/PrintConfig.cpp:3762
msgid "Density"
msgstr "Yoğunluk"

#: src/libslic3r/PrintConfig.cpp:1089
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"Filament yoğunluğunuzu buraya girin. Bu sadece istatistiksel bilgi içindir. "
"İyi bir yol, bilinen bir filament uzunluğunu tartmak ve uzunluğun hacme "
"oranını hesaplamaktır. Daha iyisi, hacmi doğrudan yer değiştirme yoluyla "
"hesaplamaktır."

#: src/libslic3r/PrintConfig.cpp:1092
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:1097
msgid "Filament type"
msgstr "Filament tipi"

#: src/libslic3r/PrintConfig.cpp:1098
msgid "The filament material type for use in custom G-codes."
msgstr "Özel G kodlarında kullanım için filament malzeme tipi."

#: src/libslic3r/PrintConfig.cpp:1126
msgid "Soluble material"
msgstr "Çözünür malzeme"

#: src/libslic3r/PrintConfig.cpp:1127
msgid "Soluble material is most likely used for a soluble support."
msgstr "Çözünebilir malzeme genellikle destekler için kullanılır."

#: src/libslic3r/PrintConfig.cpp:1133
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""
"Buraya kg başına filament maliyetinizi girin. Bu sadece istatistiksel bilgi "
"içindir."

#: src/libslic3r/PrintConfig.cpp:1134
msgid "money/kg"
msgstr "fiyat/kg"

#: src/libslic3r/PrintConfig.cpp:1139
msgid "Spool weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1140
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1144
msgid "g"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:3866
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1157
msgid "Fill angle"
msgstr "Doldurma açısı"

#: src/libslic3r/PrintConfig.cpp:1159
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"Dolgu oryantasyonu için varsayılan taban açısı. Buna çapraz tarama "
"uygulanacaktır. Köprüler, Slic3r uygulamasının algılayabileceği en iyi yön "
"kullanılarak doldurulur, bu nedenle bu ayar onları etkilemez."

#: src/libslic3r/PrintConfig.cpp:1171
msgid "Fill density"
msgstr "Dolgu yoğunluğu"

#: src/libslic3r/PrintConfig.cpp:1173
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "İç dolgu yoğunluğu, %0 - %100 aralığında ifade edilir."

#: src/libslic3r/PrintConfig.cpp:1208
msgid "Fill pattern"
msgstr "Dolgu deseni"

#: src/libslic3r/PrintConfig.cpp:1210
msgid "Fill pattern for general low-density infill."
msgstr "Genel düşük yoğunluklu dolgu için dolgu deseni."

#: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:2842
msgid "Grid"
msgstr "Kafes"

#: src/libslic3r/PrintConfig.cpp:1233
msgid "Stars"
msgstr "Yıldızlar"

#: src/libslic3r/PrintConfig.cpp:1234
msgid "Cubic"
msgstr "Kübik"

#: src/libslic3r/PrintConfig.cpp:1235
msgid "Line"
msgstr "Hat"

#: src/libslic3r/PrintConfig.cpp:1237 src/libslic3r/PrintConfig.cpp:2796
msgid "Honeycomb"
msgstr "Bal peteği"

#: src/libslic3r/PrintConfig.cpp:1238
msgid "3D Honeycomb"
msgstr "3B Petek"

#: src/libslic3r/PrintConfig.cpp:1239
msgid "Gyroid"
msgstr "Gyroid"

#: src/libslic3r/PrintConfig.cpp:1243
msgid "Adaptive Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1244
msgid "Support Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1245
msgid "Lightning"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1250
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""
"Bu, yazıcınızın ilk katman için kullanacağı hızlanmadır. İlk katman için "
"hızlanma kontrolünü devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1258
msgid "First object layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1259
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1268
msgid "First layer bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1269
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""
"İlk katman için ısıtılmış tabla sıcaklığı. G-code dosyası tabla sıcaklığı "
"kontrol komutlarını devre dışı bırakmak için bunu sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1279
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"İlk katman için manuel ekstrüzyon genişliğini ayarlamak üzere bunu sıfır "
"olmayan bir değere ayarlayın. Bunu, daha iyi yapışma için daha fazla "
"ekstrüder zorlamak için kullanabilirsiniz. Yüzde olarak ifade edilirse "
"(örneğin% 120), ilk katman yüksekliği üzerinden hesaplanır. Sıfıra "
"ayarlanırsa, varsayılan ekstrüzyon genişliğini kullanır."

#: src/libslic3r/PrintConfig.cpp:1293
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1301
msgid "First layer speed"
msgstr "İlk katman hızı"

#: src/libslic3r/PrintConfig.cpp:1302
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"Mutlak değer olarak mm/s cinsinden ifade edilirse, bu hız, türüne "
"bakılmaksızın, ilk katmanın tüm yazdırma hareketlerine uygulanır. Yüzde "
"olarak ifade edilirse (örneğin:% 40), varsayılan hızları ölçeklendirir."

#: src/libslic3r/PrintConfig.cpp:1312
msgid "Speed of object first layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1313
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1323
msgid "First layer nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1324
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1332
msgid "Full fan speed at layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1333
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1345
msgid "Fuzzy skin type."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1352
msgid "Outside walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1353
msgid "All walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1358
msgid "Fuzzy skin thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1360
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1368
msgid "Fuzzy skin point distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1370
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1378
msgid "Fill gaps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1380
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1385
msgid "Gap fill"
msgstr "Boşluk doldurma"

#: src/libslic3r/PrintConfig.cpp:1387
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"Kısa zikzak hamleleri kullanarak küçük boşlukları doldurma hızı. Çok fazla "
"titreme ve rezonans sorunlarından kaçınmak için bunu oldukça düşük tutun. "
"Boşluk doldurmayı devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1395
msgid "Verbose G-code"
msgstr "Ayrıntılı G-kodu"

#: src/libslic3r/PrintConfig.cpp:1396
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"G-code dosyası her satırına açıklayıcı birer metin eklemek için "
"etkinleştirin. SD karttan yazdırma işleminde dosya büyüklüğü artacağından "
"yazılıma ek bir yük getirebilir."

#: src/libslic3r/PrintConfig.cpp:1403
msgid "G-code flavor"
msgstr "G-code derleyici"

#: src/libslic3r/PrintConfig.cpp:1404
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1431
msgid "No extrusion"
msgstr "Ekstrüzyon yok"

#: src/libslic3r/PrintConfig.cpp:1436
msgid "Label objects"
msgstr "Nesneleri etiketle"

#: src/libslic3r/PrintConfig.cpp:1437
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""
"G-code dosyasına baskı hareketlerinin hangi nesneye ait olduklarını "
"belirtmesi amacıyla etiketler eklemek için bu seçeneği aktif edin. Octoprint "
"Nesne İptal (CancelObject) eklentisi için kullanışlıdır. Bu ayarlar, Tek "
"Ekstrüder Çoklu Malzeme ayarları ile uyumlu DEĞİLDİR."

#: src/libslic3r/PrintConfig.cpp:1444
msgid "G-code substitutions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1445
msgid "Find / replace patterns in G-code lines and substitute them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1450
msgid "High extruder current on filament swap"
msgstr "Filament değişiminde yüksek ekstrüder akımı"

#: src/libslic3r/PrintConfig.cpp:1451
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"Filament değiştirme sekansı sırasında ekstrüder motor akımını arttırmak, "
"hızlı sıkıştırma hızlarını sağlamak ve çirkin şekilli bir ucu olan bir "
"filament yüklenirken direncin üstesinden gelmek için faydalı olabilir."

#: src/libslic3r/PrintConfig.cpp:1459
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""
"Bu, yazıcınızın dolgu için kullanacağı hızlanmadır. Dolgu için hızlanma "
"kontrolünü devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1467
msgid "Combine infill every"
msgstr "Her n katmanda bir dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1469
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"Bu özellik, dolguyu birleştirmenize ve ince duvarları korurken daha kalın "
"dolgu katmanlarını sıkıştırarak baskınızı hızlandırır, böylece doğruluk "
"sağlar."

#: src/libslic3r/PrintConfig.cpp:1472
msgid "Combine infill every n layers"
msgstr "Her n katmanındaki dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1478
msgid "Length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1480
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1496
msgid "0 (no open anchors)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:1520
msgid "1 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1498 src/libslic3r/PrintConfig.cpp:1521
msgid "2 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1499 src/libslic3r/PrintConfig.cpp:1522
msgid "5 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1500 src/libslic3r/PrintConfig.cpp:1523
msgid "10 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1501 src/libslic3r/PrintConfig.cpp:1524
msgid "1000 (unlimited)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1506
msgid "Maximum length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1508
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1519
msgid "0 (not anchored)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1529
msgid "Infill extruder"
msgstr "Dolgu"

#: src/libslic3r/PrintConfig.cpp:1531
msgid "The extruder to use when printing infill."
msgstr "Dolgu yazdırırken kullanılacak ekstrüder."

#: src/libslic3r/PrintConfig.cpp:1539
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Dolgu için manuel ekstrüzyon genişliğini ayarlamak üzere bunu sıfır olmayan "
"bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı takdirde varsayılan "
"ekstrüzyon genişliği kullanılacaktır, aksi takdirde 1.125 x nozül çapı "
"kullanılacaktır. Dolguyu hızlandırmak ve parçalarınızı daha güçlü hale "
"getirmek için yağlı ekstrüdatlar kullanmak isteyebilirsiniz. Yüzde olarak "
"ifade edilirse (örneğin% 90), katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:1550
msgid "Infill before perimeters"
msgstr "Duvarlardan önce dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1551
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""
"Bu seçenek, varsayılanın aksine önce dolguyu yapıp daha sonra duvarların "
"basılmasını sağlar."

#: src/libslic3r/PrintConfig.cpp:1556
msgid "Only infill where needed"
msgstr "Sadece ihtiyaç duyulan yerlerde dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1558
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"Bu seçenek, tavanları desteklemek için gerçekte ihtiyaç duyulan alanlarla "
"dolumu sınırlayacaktır (iç destek olarak işlev görecektir). "
"Etkinleştirilirse, söz konusu birden fazla kontrol nedeniyle G kodu "
"oluşumunu yavaşlatır."

#: src/libslic3r/PrintConfig.cpp:1565
msgid "Infill/perimeters overlap"
msgstr "Dolgu/duvar üst üste binme"

#: src/libslic3r/PrintConfig.cpp:1567
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"Bu ayar daha iyi bir yapıştırma için dolgu ve duvar arasında ek bir üst üste "
"bindirme uygular. Teorik olarak buna ihtiyaç duyulmamalı, ancak geri tepme "
"boşluklara neden olabilir. Yüzde olarak ifade edilirse (örnek:% 15), duvar "
"ekstrüzyon genişliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:1578
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr "Dahili dolguyu yazdırma hızı. Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1586
msgid "Inherits profile"
msgstr "Miras profil"

#: src/libslic3r/PrintConfig.cpp:1587
msgid "Name of the profile, from which this profile inherits."
msgstr "Bu profilin devraldığı profilin adı."

#: src/libslic3r/PrintConfig.cpp:1600
msgid "Interface shells"
msgstr "Ara bağlantı duvarları"

#: src/libslic3r/PrintConfig.cpp:1601
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"Bitişik malzemeler/hacimler arasında katı kabuk oluşumuna zorlar. Yarı "
"saydam malzemelerle veya çözülebilir destek malzemeleriyle çoklu ekstrüder "
"baskıları için kullanışlıdır."

#: src/libslic3r/PrintConfig.cpp:1609
msgid "Maximum width of a segmented region"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1610
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1611 src/libslic3r/PrintConfig.cpp:2222
#: src/libslic3r/PrintConfig.cpp:2231
msgid "mm (zero to disable)"
msgstr "mm (devre dışı bırakmak için sıfır)"

#: src/libslic3r/PrintConfig.cpp:1618
msgid "Enable ironing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1619
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1625 src/libslic3r/PrintConfig.cpp:1627
msgid "Ironing Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1632
msgid "All top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1633
msgid "Topmost surface only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1634
msgid "All solid surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Flow rate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1641
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1649
msgid "Spacing between ironing passes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1651
msgid "Distance between ironing lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1668
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"Bu özel kod, Z hareketinden hemen sonra ve ekstrüder ilk katman noktasına "
"hareket etmeden önce her katman değişiminde eklenir. Yer tutucu "
"değişkenlerini tüm Slic3r ayarlarının yanı sıra [layer_num] ve [layer_z] "
"için kullanabileceğinizi unutmayın."

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Supports remaining times"
msgstr "Kalan süreleri destekler"

#: src/libslic3r/PrintConfig.cpp:1680
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"Yazılımın kalan süreyi doğru göstermesi için M73 P [yazdırılan yüzde] R "
"[dakika cinsinden kalan süre], G-code içine 1 dakikalık aralıklarla "
"uygulanır. Şu an itibariyle sadece Prusa i3 MK3 yazılımı M73'ü tanıyor. "
"Ayrıca i3 MK3 üretici yazılımı sessiz mod için M73 Qxx Sxx'i destekler."

#: src/libslic3r/PrintConfig.cpp:1688
msgid "Supports stealth mode"
msgstr "Gizli modu destekler"

#: src/libslic3r/PrintConfig.cpp:1689
msgid "The firmware supports stealth mode"
msgstr "Üretici yazılımı gizli modu destekliyor"

#: src/libslic3r/PrintConfig.cpp:1694
msgid "How to apply limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1695
msgid "Purpose of Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1697
msgid "How to apply the Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1702
msgid "Emit to G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1703
msgid "Use for time estimate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1704
msgid "Ignore"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1727
msgid "Maximum feedrate X"
msgstr "En yüksek hız X"

#: src/libslic3r/PrintConfig.cpp:1728
msgid "Maximum feedrate Y"
msgstr "En yüksek hız Y"

#: src/libslic3r/PrintConfig.cpp:1729
msgid "Maximum feedrate Z"
msgstr "En yüksek hız Z"

#: src/libslic3r/PrintConfig.cpp:1730
msgid "Maximum feedrate E"
msgstr "En yüksek hız E"

#: src/libslic3r/PrintConfig.cpp:1733
msgid "Maximum feedrate of the X axis"
msgstr "X ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1734
msgid "Maximum feedrate of the Y axis"
msgstr "Y ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1735
msgid "Maximum feedrate of the Z axis"
msgstr "Z ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1736
msgid "Maximum feedrate of the E axis"
msgstr "E ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1744
msgid "Maximum acceleration X"
msgstr "En yüksek hızlanma X"

#: src/libslic3r/PrintConfig.cpp:1745
msgid "Maximum acceleration Y"
msgstr "En yüksek hızlanma Y"

#: src/libslic3r/PrintConfig.cpp:1746
msgid "Maximum acceleration Z"
msgstr "En yüksek hızlanma Z"

#: src/libslic3r/PrintConfig.cpp:1747
msgid "Maximum acceleration E"
msgstr "En yüksek hızlanma E"

#: src/libslic3r/PrintConfig.cpp:1750
msgid "Maximum acceleration of the X axis"
msgstr "X ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1751
msgid "Maximum acceleration of the Y axis"
msgstr "Y ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1752
msgid "Maximum acceleration of the Z axis"
msgstr "Z ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1753
msgid "Maximum acceleration of the E axis"
msgstr "E ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1761
msgid "Maximum jerk X"
msgstr "En yüksek ani hareket X"

#: src/libslic3r/PrintConfig.cpp:1762
msgid "Maximum jerk Y"
msgstr "En yüksek ani hareket Y"

#: src/libslic3r/PrintConfig.cpp:1763
msgid "Maximum jerk Z"
msgstr "En yüksek ani hareket Z"

#: src/libslic3r/PrintConfig.cpp:1764
msgid "Maximum jerk E"
msgstr "En yüksek ani hareket E"

#: src/libslic3r/PrintConfig.cpp:1767
msgid "Maximum jerk of the X axis"
msgstr "X ekseninin en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1768
msgid "Maximum jerk of the Y axis"
msgstr "Y ekseninin en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1769
msgid "Maximum jerk of the Z axis"
msgstr "Z ekseni en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1770
msgid "Maximum jerk of the E axis"
msgstr "E ekseninin en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1780
msgid "Minimum feedrate when extruding"
msgstr "Ekstrüzyon sırasında en düşük ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1782
msgid "Minimum feedrate when extruding (M205 S)"
msgstr "Ekstrüzyon sırasında en düşük ilerleme hızı (M205 S)"

#: src/libslic3r/PrintConfig.cpp:1790
msgid "Minimum travel feedrate"
msgstr "En düşük boşta ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1792
msgid "Minimum travel feedrate (M205 T)"
msgstr "En düşük hareket hızı (M205 T)"

#: src/libslic3r/PrintConfig.cpp:1800
msgid "Maximum acceleration when extruding"
msgstr "Ekstrüzyon sırasında en yüksek hızlanma"

#: src/libslic3r/PrintConfig.cpp:1802
msgid ""
"Maximum acceleration when extruding (M204 P)\n"
"\n"
"Marlin (legacy) firmware flavor will use this also as travel acceleration "
"(M204 T)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1813
msgid "Maximum acceleration when retracting"
msgstr "Geri çekilirken en yüksek hızlanma"

#: src/libslic3r/PrintConfig.cpp:1815
msgid "Maximum acceleration when retracting (M204 R)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1823
msgid "Maximum acceleration for travel moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1825
msgid "Maximum acceleration for travel moves (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1832 src/libslic3r/PrintConfig.cpp:1841
msgid "Max"
msgstr "En fazla"

#: src/libslic3r/PrintConfig.cpp:1833
msgid "This setting represents the maximum speed of your fan."
msgstr "Bu ayar, fanınızın en fazla hızını gösterir."

#: src/libslic3r/PrintConfig.cpp:1842
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"Bu extrüder için basılabilir en yüksek katman kalınlığıdır ve değişken "
"katman yüksekliği ile destek katman yüksekliği için kullanılır. Katmanlar "
"arası en iyi yapışma sağlamak için tavsiye edilen en büyük katman yüksekliği "
"ekstrüzyon genişliğinin %75'idir. Eğer 0 olarak girilirse katman yüksekliği "
"nozül çapının %75'i ile sınırlandırılır."

#: src/libslic3r/PrintConfig.cpp:1852
msgid "Max print speed"
msgstr "En yüksek baskı hızı"

#: src/libslic3r/PrintConfig.cpp:1853
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"Diğer hız ayarlarını 0 olarak ayarlarken Slic3r, sabit ekstrüder basıncını "
"korumak için optimum hızı otomatik olarak hesaplayacaktır. Bu deneysel ayar, "
"izin vermek istediğiniz en yüksek baskı hızını ayarlamak için kullanılır."

#: src/libslic3r/PrintConfig.cpp:1863
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""
"Bu deneysel ayar, ekstrüderinizin desteklediği en fazla hacimsel hızı "
"ayarlamak için kullanılır."

#: src/libslic3r/PrintConfig.cpp:1871
msgid "Max volumetric slope positive"
msgstr "Max hacimsel eğim pozitif"

#: src/libslic3r/PrintConfig.cpp:1872
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
"(feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1877 src/libslic3r/PrintConfig.cpp:1889
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1883
msgid "Max volumetric slope negative"
msgstr "En yüksek hacimsel eğim negatif"

#: src/libslic3r/PrintConfig.cpp:1884
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
"(feedrate 20 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1895 src/libslic3r/PrintConfig.cpp:1904
msgid "Min"
msgstr "Min"

#: src/libslic3r/PrintConfig.cpp:1896
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""
"Bu ayar, fanınızın çalışması için gereken en düşük PWM değerini gösterir."

#: src/libslic3r/PrintConfig.cpp:1905
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"Bu ekstrüder için yazdırılabilir en düşük katman yüksekliğidir ve değişken "
"katman yüksekliği için çözünürlüğü sınırlar. Tipik değerler 0,05 mm ile 0,1 "
"mm arasındadır."

#: src/libslic3r/PrintConfig.cpp:1913
msgid "Min print speed"
msgstr "En düşük baskı hızı"

#: src/libslic3r/PrintConfig.cpp:1914
msgid "Slic3r will not scale speed down below this speed."
msgstr "Slic3r, hızı bu değerin altına düşürmez."

#: src/libslic3r/PrintConfig.cpp:1921
msgid "Minimal filament extrusion length"
msgstr "En düşük filament ekstrüzyon uzunluğu"

#: src/libslic3r/PrintConfig.cpp:1922
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"Eteği basmak için gereken filament uzunluğu belirtilen değerden daha az ise "
"en az bu değer kadar filament kullanılarak etek basılır. Çoklu ekstrüder "
"yazıcılarda bu her ekstrüder için geçerlidir."

#: src/libslic3r/PrintConfig.cpp:1931
msgid "Configuration notes"
msgstr "Yapılandırma notları"

#: src/libslic3r/PrintConfig.cpp:1932
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"Kişisel notlarınızı buraya yazabilirsiniz. Bu metin G-kod başlığı "
"yorumlarına eklenecektir."

#: src/libslic3r/PrintConfig.cpp:1942
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "Nozül çapı (örneğin: 0,5, 0,35 vb.)"

#: src/libslic3r/PrintConfig.cpp:1947
msgid "Host Type"
msgstr "Ana bilgisayar türü"

#: src/libslic3r/PrintConfig.cpp:1948
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"Slic3r, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu "
"alan, ana bilgisayarın türünü içermelidir."

#: src/libslic3r/PrintConfig.cpp:1972
msgid "Only retract when crossing perimeters"
msgstr "Yalnızca duvarların üzerinden geçerken geri çekme uygula"

#: src/libslic3r/PrintConfig.cpp:1973
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"Üst katmanın duvarları üzerinden geçilmeyecek ise geri çekmeyi devre dışı "
"bırak. (böylece herhangi bir sızıntı muhtemelen görünmez olacaktır)."

#: src/libslic3r/PrintConfig.cpp:1980
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1985
msgid "Output filename format"
msgstr "Çıktı dosya adı ve türü"

#: src/libslic3r/PrintConfig.cpp:1986
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"Tüm konfigürasyon seçeneklerini bu şablon içindeki değişkenler olarak "
"kullanabilirsiniz. Örneğin: [layer_height], [fill_density], [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."

#: src/libslic3r/PrintConfig.cpp:1995
msgid "Detect bridging perimeters"
msgstr "Köprüleme duvarlarını algıla"

#: src/libslic3r/PrintConfig.cpp:1997
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"Askıda kalan bölgelerde filament akışını ayarlamak için deneysel seçenek "
"(köprü akışı kullanılacaktır). Köprü işleminde geçerli hız uygulanır ve fan "
"etkinleştirilir."

#: src/libslic3r/PrintConfig.cpp:2003
msgid "Filament parking position"
msgstr "Filament park yeri"

#: src/libslic3r/PrintConfig.cpp:2004
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""
"Nozülün, filamentin boşaltıldığında park edildiği pozisyondan uzaklığı. Bu "
"değer yazıcı yazılımındaki değerle eşleşmelidir."

#: src/libslic3r/PrintConfig.cpp:2012
msgid "Extra loading distance"
msgstr "Fazladan yükleme mesafesi"

#: src/libslic3r/PrintConfig.cpp:2013
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""
"Sıfıra ayarlandığında, filamentin yükleme sırasında park konumundan hareket "
"ettirildiği mesafe, yükleme sırasında geri taşınan ile tamamen aynıdır. "
"Pozitif olduğunda, eklenirse, negatifse, yükleme hareketi boşaltmadan daha "
"kısadır."

#: src/libslic3r/PrintConfig.cpp:2021 src/libslic3r/PrintConfig.cpp:2038
#: src/libslic3r/PrintConfig.cpp:2052 src/libslic3r/PrintConfig.cpp:2062
msgid "Perimeters"
msgstr "Duvarlar"

#: src/libslic3r/PrintConfig.cpp:2022
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2029
msgid "Perimeter extruder"
msgstr "Duvar"

#: src/libslic3r/PrintConfig.cpp:2031
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""
"Duvar ve kenarları (brim) yazdırırken kullanılacak ekstrüder. İlk ekstrüder "
"1'dir."

#: src/libslic3r/PrintConfig.cpp:2040
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"Duvar için manuel ekstrüzyon genişliği ayarlamak için bunu sıfır olmayan bir "
"değere ayarlayın. Daha hassas yüzeyler elde etmek için daha ince "
"ekstrüderler kullanmak isteyebilirsiniz. Sıfır bırakılırsa, ayarlandığı "
"takdirde varsayılan ekstrüzyon genişliği kullanılacaktır, aksi takdirde "
"1.125 x nozül çapı kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% "
"200) katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2054
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr "Duvarlar için hız. Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2064
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"Bu seçenek, her katman için oluşturulacak duvar sayısını ayarlar. "
"Slic3r'nin, Fazladan Duvar seçeneği etkinse, daha yüksek sayıda duvarlardan "
"yararlanan eğimli yüzeyleri tespit ettiğinde bu sayıyı otomatik olarak "
"artırabileceğini unutmayın."

#: src/libslic3r/PrintConfig.cpp:2068
msgid "(minimum)"
msgstr "(En az)"

#: src/libslic3r/PrintConfig.cpp:2076
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"G-code satırlarını özel komut dosyaları aracılığıyla işlemek istiyorsanız, "
"burada mutlak yollarını listeleyebilirsiniz. Birden çok komut dosyasını "
"noktalı virgülle ayırın. Komut dosyaları, G argümanına giden mutlak yolu ilk "
"argüman olarak geçirir ve ortam değişkenlerini okuyarak Slic3r ayarlarına "
"erişebilirler."

#: src/libslic3r/PrintConfig.cpp:2088
msgid "Printer type"
msgstr "Yazıcı tipi"

#: src/libslic3r/PrintConfig.cpp:2089
msgid "Type of the printer."
msgstr "Yazıcının tipi."

#: src/libslic3r/PrintConfig.cpp:2094
msgid "Printer notes"
msgstr "Yazıcı notları"

#: src/libslic3r/PrintConfig.cpp:2095
msgid "You can put your notes regarding the printer here."
msgstr "Yazıcıyla ilgili notlarınızı buraya yazabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:2103
msgid "Printer vendor"
msgstr "Yazıcı satıcısı"

#: src/libslic3r/PrintConfig.cpp:2104
msgid "Name of the printer vendor."
msgstr "Yazıcı satıcısının adı."

#: src/libslic3r/PrintConfig.cpp:2109
msgid "Printer variant"
msgstr "Yazıcı varyantı"

#: src/libslic3r/PrintConfig.cpp:2110
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""
"Yazıcı varyantının adı. Örneğin, yazıcı varyantları bir nozül çapı ile ayırt "
"edilebilir."

#: src/libslic3r/PrintConfig.cpp:2127
msgid "Raft contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2129
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2136
msgid "Raft expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2138
msgid "Expansion of the raft in XY plane for better stability."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2145
msgid "First layer density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2147
msgid "Density of the first raft or support layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2155
msgid "First layer expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2157
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2164
msgid "Raft layers"
msgstr "Alt destek katman sayısı"

#: src/libslic3r/PrintConfig.cpp:2166
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""
"Nesne bu sayıda katman kadar yükseltilecek ve altında destek üretilecektir."

#: src/libslic3r/PrintConfig.cpp:2174
msgid "Slice resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2175
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"Dilimleme işini hızlandırmak ve bellek kullanımını azaltmak için girdi "
"dosyasını basitleştirmek için kullanılan en düşük detay çözünürlüğü. Yüksek "
"çözünürlüklü modeller genellikle yazıcıların verebileceğinden daha fazla "
"ayrıntı taşır. Herhangi bir basitleştirmeyi devre dışı bırakmak ve girişten "
"gelen tam çözünürlüğü kullanmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2185
msgid "G-code resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2186
msgid ""
"Maximum deviation of exported G-code paths from their full resolution "
"counterparts. Very high resolution G-code requires huge amount of RAM to "
"slice and preview, also a 3D printer may stutter not being able to process a "
"high resolution G-code in a timely manner. On the other hand, a low "
"resolution G-code will produce a low poly effect and because the G-code "
"reduction is performed at each layer independently, visible artifacts may be "
"produced."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2197
msgid "Minimum travel after retraction"
msgstr "Geri çekmeden sonra en düşük hareket"

#: src/libslic3r/PrintConfig.cpp:2198
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr "Boşta hareket bu uzunluktan kısa olduğunda geri çekme tetiklenmez."

#: src/libslic3r/PrintConfig.cpp:2204
msgid "Retract amount before wipe"
msgstr "Temizleme işleminden önce geri çekilecek miktar"

#: src/libslic3r/PrintConfig.cpp:2205
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"Bowden ekstrüderleri ile, temizleme hareketini yapmadan önce bir miktar "
"hızlı geri çekme yapmak akıllıca olabilir."

#: src/libslic3r/PrintConfig.cpp:2212
msgid "Retract on layer change"
msgstr "Katman değişiminde geri çek"

#: src/libslic3r/PrintConfig.cpp:2213
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "Bir Z hareketi yapıldığında bu seçenek geri çekmeye zorlar."

#: src/libslic3r/PrintConfig.cpp:2218 src/libslic3r/PrintConfig.cpp:2226
msgid "Length"
msgstr "Uzunluk"

#: src/libslic3r/PrintConfig.cpp:2219
msgid "Retraction Length"
msgstr "Geri çekme uzunluğu"

#: src/libslic3r/PrintConfig.cpp:2220
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"Geri çekme tetiklendiğinde, filament belirtilen miktarda geri çekilir "
"(uzunluk, ekstrüzyona girmeden önce ham filament üzerinde ölçülür)."

#: src/libslic3r/PrintConfig.cpp:2227
msgid "Retraction Length (Toolchange)"
msgstr "Geri Çekme Uzunluğu (Takım Değişimi)"

#: src/libslic3r/PrintConfig.cpp:2228
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"Alet değiştirilmeden önce geri çekme tetiklendiğinde, filament belirtilen "
"miktarda geri çekilir (uzunluk, ham filament üzerinde, ekstrüdere girmeden "
"önce ölçülür)."

#: src/libslic3r/PrintConfig.cpp:2236
msgid "Lift Z"
msgstr "Z kaldırma"

#: src/libslic3r/PrintConfig.cpp:2237
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"Bunu pozitif bir değere ayarlarsanız, her geri çekme tetiklendiğinde Z hızlı "
"bir şekilde yükselir. Birden fazla ekstrüder kullanıldığında, yalnızca ilk "
"ekstrüder için ayar dikkate alınacaktır."

#: src/libslic3r/PrintConfig.cpp:2244
msgid "Above Z"
msgstr "Z'nin üstünde"

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Only lift Z above"
msgstr "Sadece yukarıdaki Z kaldıracı"

#: src/libslic3r/PrintConfig.cpp:2246
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"Bunu pozitif bir değere ayarlarsanız, Z kaldırma yalnızca belirtilen mutlak "
"Z'nin üzerinde gerçekleşir. Bu ayarı, ilk katlarda kaldırmayı atlamak için "
"ayarlayabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:2253
msgid "Below Z"
msgstr "Z altında"

#: src/libslic3r/PrintConfig.cpp:2254
msgid "Only lift Z below"
msgstr "Sadece aşağıda Z kaldırarak"

#: src/libslic3r/PrintConfig.cpp:2255
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"Bunu pozitif bir değere ayarlarsanız, Z kaldırma yalnızca belirtilen mutlak "
"Z'nin altında gerçekleşir. Bu ayarı, asansörü ilk katmanlara sınırlamak için "
"ayarlayabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:2263 src/libslic3r/PrintConfig.cpp:2271
msgid "Extra length on restart"
msgstr "Yeniden başlatma sırasında fazladan uzunluk"

#: src/libslic3r/PrintConfig.cpp:2264
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"Geri çekme işlemi boşta hareketten sonra telafi edildiğinde, ekstrüder bu "
"ilave filament miktarını iter. Bu ayara nadiren ihtiyaç duyulur."

#: src/libslic3r/PrintConfig.cpp:2272
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""
"Alet değiştirildikten sonra geri çekme telafi edildiğinde, ekstrüder bu "
"ilave filament miktarını itecektir."

#: src/libslic3r/PrintConfig.cpp:2279 src/libslic3r/PrintConfig.cpp:2280
msgid "Retraction Speed"
msgstr "Geri çekme hızı"

#: src/libslic3r/PrintConfig.cpp:2281
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "Geri çekme hızı (sadece ekstrüder motoru için geçerlidir)."

#: src/libslic3r/PrintConfig.cpp:2287 src/libslic3r/PrintConfig.cpp:2288
msgid "Deretraction Speed"
msgstr "İleri İtme Hızı"

#: src/libslic3r/PrintConfig.cpp:2289
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"Çekme işleminden sonra bir filamentin ekstrüder içine yüklenme hızı (sadece "
"ekstrüder motoru için geçerlidir). Sıfır bırakılırsa, geri çekme hızı "
"kullanılır."

#: src/libslic3r/PrintConfig.cpp:2296
msgid "Seam position"
msgstr "Katman başlangıç konumu"

#: src/libslic3r/PrintConfig.cpp:2298
msgid "Position of perimeters starting points."
msgstr "Katman başlangıç noktalarının konumu."

#: src/libslic3r/PrintConfig.cpp:2304
msgid "Random"
msgstr "Rasgele"

#: src/libslic3r/PrintConfig.cpp:2305
msgid "Nearest"
msgstr "En yakın"

#: src/libslic3r/PrintConfig.cpp:2306
msgid "Aligned"
msgstr "Hizalı"

#: src/libslic3r/PrintConfig.cpp:2312
msgid "Staggered inner seams"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2313
msgid ""
"This option causes the inner seams to be shifted backwards based on their "
"depth, forming a zigzag pattern."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2320
msgid "Direction"
msgstr "Yön"

#: src/libslic3r/PrintConfig.cpp:2322
msgid "Preferred direction of the seam"
msgstr "Tercih edilen dikiş yönü"

#: src/libslic3r/PrintConfig.cpp:2323
msgid "Seam preferred direction"
msgstr "Dikiş yönü tercih"

#: src/libslic3r/PrintConfig.cpp:2330
msgid "Jitter"
msgstr "Değişimi"

#: src/libslic3r/PrintConfig.cpp:2332
msgid "Seam preferred direction jitter"
msgstr "Dikiş tercih edilen yön titreşimi"

#: src/libslic3r/PrintConfig.cpp:2333
msgid "Preferred direction of the seam - jitter"
msgstr "Dikişin tercih edilen yönü - titreme"

#: src/libslic3r/PrintConfig.cpp:2340
msgid "Distance from brim/object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2341
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2347
msgid "Skirt height"
msgstr "Etek yüksekliği"

#: src/libslic3r/PrintConfig.cpp:2348
msgid "Height of skirt expressed in layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2354
msgid "Draft shield"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2355
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2363
msgid "Disabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2364
msgid "Limited"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2365
msgid "Enabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2370
msgid "Loops (minimum)"
msgstr "Etek sayısı (en az)"

#: src/libslic3r/PrintConfig.cpp:2371
msgid "Skirt Loops"
msgstr "Etek Sayısı"

#: src/libslic3r/PrintConfig.cpp:2372
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"Etek için ilmek sayısı. En düşük Ekstrüzyon Uzunluğu seçeneği ayarlanmışsa, "
"döngü sayısı burada yapılandırılandan daha büyük olabilir. Eteği tamamen "
"devre dışı bırakmak için bunu sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2380
msgid "Slow down if layer print time is below"
msgstr "Katman yazdırma süresi bu değerden düşükse yavaşla"

#: src/libslic3r/PrintConfig.cpp:2381
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"Katman yazdırma süresi bu sürenin altında tahmin edilirse, süreyi bu değere "
"uzatmak için yazdırma hızı düşürülür."

#: src/libslic3r/PrintConfig.cpp:2390
msgid "Small perimeters"
msgstr "Küçük duvarlar"

#: src/libslic3r/PrintConfig.cpp:2392
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Bu ayar yarıçapı <= 6.5mm olan (genellikle delikler) duvar hızını etkiler. "
"Yüzde olarak ifade edilirse (örneğin:% 80), yukarıdaki duvar hız ayarında "
"hesaplanır. Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2402
msgid "Solid infill threshold area"
msgstr "Katı dolgu eşik alanı"

#: src/libslic3r/PrintConfig.cpp:2404
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""
"Belirtilen eşikten daha küçük bir alana sahip bölgeler için katı dolgu "
"yapılmasına zorlar."

#: src/libslic3r/PrintConfig.cpp:2405
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:2411
msgid "Solid infill extruder"
msgstr "Katı dolgu"

#: src/libslic3r/PrintConfig.cpp:2413
msgid "The extruder to use when printing solid infill."
msgstr "Katı dolguyu yazdırırken kullanılacak ekstrüder."

#: src/libslic3r/PrintConfig.cpp:2419
msgid "Solid infill every"
msgstr "Her n katmanda bir katı dolgu yap"

#: src/libslic3r/PrintConfig.cpp:2421
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"Bu özellik, verilen her katmanda katı bir katmanın basılmasını sağlar. Devre "
"dışı bırakmak için sıfır girin. Bunu herhangi bir değere ayarlayabilirsiniz "
"(örneğin 9999); Slic3r, nozül çapına ve katman yüksekliğine göre "
"birleştirilecek mümkün olan en fazla katman sayısını otomatik olarak "
"seçecektir."

#: src/libslic3r/PrintConfig.cpp:2431 src/libslic3r/PrintConfig.cpp:2443
msgid "Solid infill"
msgstr "Katı dolgu"

#: src/libslic3r/PrintConfig.cpp:2433
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"Katı yüzeyler için dolgu için manuel ekstrüzyon genişliğini ayarlamak üzere "
"bunu sıfır olmayan bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı "
"takdirde varsayılan ekstrüzyon genişliği kullanılacaktır, aksi takdirde "
"1.125 x nozül çapı kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% "
"90), katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2445
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"Katı bölgelerin yazdırılması için hız (üst / alt / iç yatay kabuklar). Bu, "
"yukarıdaki varsayılan doldurma hızına göre yüzde olarak ifade edilebilir "
"(örneğin:% 80). Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2457
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "Üst ve alt yüzeylerde üretilecek katı katmanların sayısı."

#: src/libslic3r/PrintConfig.cpp:2463 src/libslic3r/PrintConfig.cpp:2464
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2470
msgid "Spiral vase"
msgstr "Spiral vazo"

#: src/libslic3r/PrintConfig.cpp:2471
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2479
msgid "Temperature variation"
msgstr "Sıcaklık değişimi"

#: src/libslic3r/PrintConfig.cpp:2480
msgid ""
"Temperature difference to be applied when an extruder is not active. The "
"value is not used when 'idle_temperature' in filament settings is defined."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2491
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2506
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2522
msgid "Color change G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2523
msgid "This G-code will be used as a code for the color change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2532
msgid "This G-code will be used as a code for the pause print"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2541
msgid "This G-code will be used as a custom code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2549
msgid "Single Extruder Multi Material"
msgstr "Tek Ekstrüder Çoklu Filament"

#: src/libslic3r/PrintConfig.cpp:2550
msgid "The printer multiplexes filaments into a single hot end."
msgstr "Tek nozül çok extruder ile çoklu filament kullanan yazıcı türüdür."

#: src/libslic3r/PrintConfig.cpp:2555
msgid "Prime all printing extruders"
msgstr "Tüm ekstrüderleri temizle"

#: src/libslic3r/PrintConfig.cpp:2556
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""
"Etkinleştirildiğinde, tüm yazdırma ekstrüderleri, baskının başlangıcında "
"tablanın ön kenarından temizlenir."

#: src/libslic3r/PrintConfig.cpp:2561
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2562
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2569
msgid "Slice gap closing radius"
msgstr "Dilimleme boşluğu kapatma yarı çapı"

#: src/libslic3r/PrintConfig.cpp:2571
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"Üçgen yüzey dilimleme işlemi sırasında aralık kapatma yarıçapından 2 kat "
"küçük çatlaklar doldurulur. Aralık kapatma işlemi, nihai baskı çözünürlüğünü "
"azaltabilir, bu nedenle değerin makul derecede düşük tutulması önerilir."

#: src/libslic3r/PrintConfig.cpp:2579
msgid "Slicing Mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2581
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2586
msgid "Regular"
msgstr "Normal"

#: src/libslic3r/PrintConfig.cpp:2587
msgid "Even-odd"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2588
msgid "Close holes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2593
msgid "Generate support material"
msgstr "Destekleri aktif et"

#: src/libslic3r/PrintConfig.cpp:2595
msgid "Enable support material generation."
msgstr "Destekleri aktif et."

#: src/libslic3r/PrintConfig.cpp:2599
msgid "Auto generated supports"
msgstr "Destekleri otomatik oluştur"

#: src/libslic3r/PrintConfig.cpp:2601
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"İşaretliyse, çıkma eşik değerine göre destek otomatik olarak oluşturulur. "
"Denetlenmezse, yalnızca \"Destek Uygulayıcı\" birimleri içinde destekler "
"oluşturulur."

#: src/libslic3r/PrintConfig.cpp:2607
msgid "XY separation between an object and its support"
msgstr "Bir nesne ve destek arasındaki XY eksenlerdeki ayrım"

#: src/libslic3r/PrintConfig.cpp:2609
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"Bir nesne ve desteği arasındaki XY ayrımı. Yüzde olarak ifade edilirse "
"(örneğin% 50), dış duvar genişliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2620
msgid "Pattern angle"
msgstr "Desen açısı"

#: src/libslic3r/PrintConfig.cpp:2622
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "Destek desenini yatay düzlemde döndürmek için bu ayarı kullanın."

#: src/libslic3r/PrintConfig.cpp:2632 src/libslic3r/PrintConfig.cpp:3450
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""
"Yalnızca tablaya yerleştirilmiş ise destek oluştur. Baskıda destek oluşturma."

#: src/libslic3r/PrintConfig.cpp:2638
msgid "Top contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2640
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"Nesne ve destek ara bağlantısı arasındaki dikey mesafe. Bunu 0'a ayarlamak "
"ayrıca Slic3r'nin birinci nesne katmanı için köprü akışı ve hız kullanmasını "
"önleyecektir."

#: src/libslic3r/PrintConfig.cpp:2648
msgid "0 (soluble)"
msgstr "0 (çözülebilir)"

#: src/libslic3r/PrintConfig.cpp:2649
msgid "0.1 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2650
msgid "0.2 (detachable)"
msgstr "0.2 (çıkarılabilir)"

#: src/libslic3r/PrintConfig.cpp:2656
msgid "Bottom contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2658
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""

#. TRN To be shown in Print Settings "Bottom contact Z distance". Have to be as short as possible
#. TRN To be shown in Print Settings "Bottom interface layers". Have to be as short as possible
#: src/libslic3r/PrintConfig.cpp:2666 src/libslic3r/PrintConfig.cpp:2751
msgid "Same as top"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2673
msgid "Enforce support for the first"
msgstr "İlk katman için desteğe zorla"

#: src/libslic3r/PrintConfig.cpp:2675
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"Normal desteğin etkinleştirilip etkinleştirilmediğine bakılmaksızın ve "
"herhangi bir açı eşiğine bakılmaksızın, alttan sayılan belirli sayıda katman "
"için destek oluştur. Bu, tablada çok ince veya zayıf bir kaplama alanına "
"sahip nesnelerin daha fazla yapışmasını sağlamak için kullanışlıdır."

#: src/libslic3r/PrintConfig.cpp:2680
msgid "Enforce support for the first n layers"
msgstr "İlk n katman için desteğe zorla"

#: src/libslic3r/PrintConfig.cpp:2686
msgid "Support material/raft/skirt extruder"
msgstr "Destek/sal (raft)/etek (skirt) ekstrüder"

#: src/libslic3r/PrintConfig.cpp:2688
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"Destek, sal (raft) ve etek (skirt) yazdırırken kullanılacak ekstrüder (takım "
"değişimlerini en aza indirmek için mevcut ekstrüder kullanmak için 1+, 0)."

#: src/libslic3r/PrintConfig.cpp:2697
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Destek için manuel ekstrüzyon genişliğini ayarlamak üzere bunu sıfır olmayan "
"bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı takdirde varsayılan "
"ekstrüzyon genişliği kullanılacaktır, aksi takdirde nozül çapı "
"kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% 90), katman "
"yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2707
msgid "Interface loops"
msgstr "Ara bağlantı döngüsü"

#: src/libslic3r/PrintConfig.cpp:2709
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""
"Desteklerin üst temas katmanını spiral şeklinde kapat. Varsayılan olarak "
"devre dışı bırakılmıştır."

#: src/libslic3r/PrintConfig.cpp:2714
msgid "Support material/raft interface extruder"
msgstr "Destek/sal (raft) bağlantı ekstrüder"

#: src/libslic3r/PrintConfig.cpp:2716
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"Destek ara bağlantısı yazdırırken kullanılacak ekstrüder (takım "
"değişimlerini en aza indirmek için mevcut ekstrüder kullanmak için 1+, 0). "
"Bu da salı (raft) etkiler."

#: src/libslic3r/PrintConfig.cpp:2724
msgid "Top interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2726
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""
"Nesneler ve destek arasına eklenecek ara bağlantı katmanlarının sayısı."

#: src/libslic3r/PrintConfig.cpp:2733
msgid "0 (off)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2734
msgid "1 (light)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2735
msgid "2 (default)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2736
msgid "3 (heavy)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2742
msgid "Bottom interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2744
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2757
msgid "Closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2759
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2767
msgid "Interface pattern spacing"
msgstr "Ara bağlantı deseni aralığı"

#: src/libslic3r/PrintConfig.cpp:2769
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""
"Ara bağlantı çizgileri arasındaki boşluk. Sağlam bir ara bağlantı elde etmek "
"için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2776
msgid "Support material interface"
msgstr "Destek ara bağlantısı"

#: src/libslic3r/PrintConfig.cpp:2778
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"Destek ara bağlantı katmanlarını yazdırma hızı. Yüzde olarak ifade edilirse "
"(örneğin% 50) destek baskı hızı üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2787
msgid "Pattern"
msgstr "Desen"

#: src/libslic3r/PrintConfig.cpp:2789
msgid "Pattern used to generate support material."
msgstr "Destek için kullanılan desen."

#: src/libslic3r/PrintConfig.cpp:2795
msgid "Rectilinear grid"
msgstr "Doğrusal ızgara"

#: src/libslic3r/PrintConfig.cpp:2801
msgid "Interface pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2803
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2817
msgid "Pattern spacing"
msgstr "Desen aralığı"

#: src/libslic3r/PrintConfig.cpp:2819
msgid "Spacing between support material lines."
msgstr "Destek hatları arasındaki boşluk."

#: src/libslic3r/PrintConfig.cpp:2828
msgid "Speed for printing support material."
msgstr "Destek baskısı için hız."

#: src/libslic3r/PrintConfig.cpp:2837
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2843
msgid "Snug"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2844
msgid "Organic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2850
msgid "Synchronize with object layers"
msgstr "Nesne katmanları ile senkronize et"

#: src/libslic3r/PrintConfig.cpp:2852
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive. This option "
"is only available when top contact Z distance is set to zero."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2859
msgid "Overhang threshold"
msgstr "Destek konulacak açı"

#: src/libslic3r/PrintConfig.cpp:2861
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"Eğim açısı (90° = dikey) verilen eşiğin üstünde olan çıkıntılar için destek "
"üretilmez. Başka bir deyişle, bu değer, destek olmadan yazdırabileceğiniz en "
"yatay eğimi (yatay düzlemden ölçülen) temsil eder. Otomatik algılama için "
"sıfıra ayarlayın (önerilir)."

#: src/libslic3r/PrintConfig.cpp:2873
msgid "With sheath around the support"
msgstr "Destek etrafında kılıf"

#: src/libslic3r/PrintConfig.cpp:2875
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"Taban desteğinin etrafına bir kılıf (tek bir duvar çizgisi) ekler. Bu, "
"desteği daha güvenilir hale getirir, ancak kaldırılması da zorlaştırır."

#: src/libslic3r/PrintConfig.cpp:2881
msgid "Tree Support Maximum Branch Angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2883
msgid ""
"The maximum angle of the branches, when the branches have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle to be able to have more reach."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2892
msgid "Tree Support Preferred Branch Angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2894
msgid ""
"The preferred angle of the branches, when they do not have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle for branches to merge faster."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2903
msgid "Tree Support Tip Diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2905
msgid "The diameter of the top of the tip of the branches of tree support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2912
msgid "Tree Support Branch Diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2914
msgid ""
"The diameter of the thinnest branches of tree support. Thicker branches are "
"more sturdy. Branches towards the base will be thicker than this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2922
msgid "Tree Support Branch Diameter Angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2924
msgid ""
"The angle of the branches' diameter as they gradually become thicker towards "
"the bottom. An angle of 0 will cause the branches to have uniform thickness "
"over their length. A bit of an angle can increase stability of the tree "
"support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2934
msgid "Tree Support Branch Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2936
msgid ""
"Adjusts the density of the support structure used to generate the tips of "
"the branches. A higher value results in better overhangs, but the supports "
"are harder to remove. Use Support Roof for very high values or ensure "
"support density is similarly high at the top."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2947
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2950
msgid "Nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2956
msgid "Thick bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2958
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2964
msgid "Detect thin walls"
msgstr "İnce duvarları algıla"

#: src/libslic3r/PrintConfig.cpp:2966
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"Tek duvarları tespit et (iki sıra duvarın sığmadığı ve bunların tek bir ize "
"daraltılması gereken parçalar)."

#: src/libslic3r/PrintConfig.cpp:2972
msgid "Threads"
msgstr "İş Parçacığı"

#: src/libslic3r/PrintConfig.cpp:2973
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""
"İplikler uzun süren görevleri paralelleştirmek için kullanılır. En uygun iş "
"parçacığı sayısı, kullanılabilir çekirdek / işlemci sayısının biraz "
"üzerindedir."

#: src/libslic3r/PrintConfig.cpp:2985
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2996 src/libslic3r/PrintConfig.cpp:3009
msgid "Top solid infill"
msgstr "Üst katı dolgu"

#: src/libslic3r/PrintConfig.cpp:2998
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"Üst yüzeyler için dolgu için manuel ekstrüzyon genişliğini ayarlamak üzere "
"bunu sıfır olmayan bir değere ayarlayın. Tüm dar bölgeleri doldurmak ve daha "
"pürüzsüz bir yüzey elde etmek için daha ince ekstrüderler kullanmak "
"isteyebilirsiniz. Sıfır bırakılırsa, ayarlandığı takdirde varsayılan "
"ekstrüzyon genişliği kullanılacaktır, aksi takdirde nozül çapı "
"kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% 90), katman "
"yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:3011
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"Üst katı katmanları yazdırma hızı (yalnızca en üstteki dış katmanlara "
"uygulanır, iç katı katmanlarına uygulanmaz). Daha güzel bir yüzey elde etmek "
"için bunu yavaşlatmak isteyebilirsiniz. Bu, yukarıdaki katı doldurma hızına "
"göre yüzde (örneğin:% 80) olarak ifade edilebilir. Otomatik için sıfıra "
"ayarlayın."

#: src/libslic3r/PrintConfig.cpp:3026
msgid "Number of solid layers to generate on top surfaces."
msgstr "Üst yüzeylerde üretilecek katı katmanların sayısı."

#: src/libslic3r/PrintConfig.cpp:3027
msgid "Top solid layers"
msgstr "Üst katı katmanlar"

#: src/libslic3r/PrintConfig.cpp:3035
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3038
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3045
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "Boşta hareket için hız (uzak ekstrüzyon noktaları arasında atlar)."

#: src/libslic3r/PrintConfig.cpp:3053
msgid "Z travel"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3054
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3062
msgid "Use firmware retraction"
msgstr "Yazılım geri çekme özelliğini kullan"

#: src/libslic3r/PrintConfig.cpp:3063
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"Bu deneysel ayar, üretici yazılımının geri çekmeyi ele alması için G10 ve "
"G11 komutlarını kullanır. Bu sadece son Marlin'de desteklenir."

#: src/libslic3r/PrintConfig.cpp:3069
msgid "Use relative E distances"
msgstr "Bağıl E mesafeleri kullan"

#: src/libslic3r/PrintConfig.cpp:3070
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"Yazılımınız göreceli E değerleri gerektiriyorsa, bunu kontrol edin, aksi "
"halde işaretlemeden bırakın. Çoğu yazılım mutlak değerleri kullanır."

#: src/libslic3r/PrintConfig.cpp:3076
msgid "Use volumetric E"
msgstr "Hacimsel E kullan"

#: src/libslic3r/PrintConfig.cpp:3077
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"Bu deneysel ayar, E değerlerini doğrusal milimetre yerine kübik milimetre "
"cinsinden verir. Üretici yazılımınız zaten filament çapını bilmiyorsa, "
"volumetrik modu açmak ve seçilen filamentle ilişkili filament çapını "
"kullanmak için başlangıç kodunuzda 'M200 D [filament çapı] T0' gibi komutlar "
"ekleyebilirsiniz. Bu sadece son sürüm Marlin'de desteklenir."

#: src/libslic3r/PrintConfig.cpp:3087
msgid "Enable variable layer height feature"
msgstr "Değişken katman yüksekliği özelliğini etkinleştir"

#: src/libslic3r/PrintConfig.cpp:3088
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"Bazı yazıcılarda veya yazıcı ayarlarında, değişken katman yüksekliğinde "
"yazdırmakta zorluk olabilir. Varsayılan olarak etkindir."

#: src/libslic3r/PrintConfig.cpp:3094
msgid "Wipe while retracting"
msgstr "Geri çekerken temizlik de yap"

#: src/libslic3r/PrintConfig.cpp:3095
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"Bu seçenek sızdıran ekstrüderlerde olası kabarcıkları en aza indirmek için "
"geri çekme esnasında nozülü hareket ettirecektir."

#: src/libslic3r/PrintConfig.cpp:3102
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"Çok malzemeli yazıcıların ekstrüderleri takım değişikliklerinde doldurması "
"veya boşaltması gerekebilir. Fazla malzemeyi temizleme kulesine boşaltır."

#: src/libslic3r/PrintConfig.cpp:3108
msgid "Purging volumes - load/unload volumes"
msgstr "Boşaltma hacimleri - hacimleri yükleme / boşaltma"

#: src/libslic3r/PrintConfig.cpp:3109
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""
"Bu vektör, temizleme kulesinde kullanılan her bir aletten / a geçmek için "
"gereken hacimleri kaydeder. Bu değerler aşağıdaki tüm temizleme hacimlerinin "
"oluşturulmasını kolaylaştırmak için kullanılır."

#: src/libslic3r/PrintConfig.cpp:3115
msgid "Purging volumes - matrix"
msgstr "Boşaltma hacimleri - matris"

#: src/libslic3r/PrintConfig.cpp:3116
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""
"Bu matris, temizleme kulesinde yeni filamenti herhangi bir takım çifti için "
"temizlemek için gereken hacimleri (kübik milimetre cinsinden) açıklar."

#: src/libslic3r/PrintConfig.cpp:3125
msgid "Position X"
msgstr "X Konumu"

#: src/libslic3r/PrintConfig.cpp:3126
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "Temizleme kulesinin sol ön köşesinin X koordinatı"

#: src/libslic3r/PrintConfig.cpp:3132
msgid "Position Y"
msgstr "Y konumu"

#: src/libslic3r/PrintConfig.cpp:3133
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "Temizleme kulesinin sol ön köşesinin Y koordinatı"

#: src/libslic3r/PrintConfig.cpp:3139
msgid "Width"
msgstr "Genişlik"

#: src/libslic3r/PrintConfig.cpp:3140
msgid "Width of a wipe tower"
msgstr "Temizleme kulesinin genişliği"

#: src/libslic3r/PrintConfig.cpp:3146
msgid "Wipe tower rotation angle"
msgstr "Temizleme Kulesi dönme açısı"

#: src/libslic3r/PrintConfig.cpp:3147
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr "X eksenine göre temizleme kulesi dönme açısı."

#: src/libslic3r/PrintConfig.cpp:3153 src/libslic3r/PrintConfig.cpp:3154
msgid "Wipe tower brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3162
msgid "Wipe into this object's infill"
msgstr "Bu nesnenin dolgusu içinde temizlik işlemi yap"

#: src/libslic3r/PrintConfig.cpp:3163
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3170
msgid "Wipe into this object"
msgstr "Bu nesneye sil"

#: src/libslic3r/PrintConfig.cpp:3171
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"Alet değişiminden sonra, temizleme kulesinde bitecek ve baskı süresini "
"azaltacak malzemeden tasarruf etmek üzere nozülü temizlemek için nesne "
"kullanılacaktır. Sonuç olarak nesnelerin renkleri karışacaktır."

#: src/libslic3r/PrintConfig.cpp:3177
msgid "Maximal bridging distance"
msgstr "En fazla köprüleme mesafesi"

#: src/libslic3r/PrintConfig.cpp:3178
msgid "Maximal distance between supports on sparse infill sections."
msgstr "Seyrek dolgu bölümlerinde destekler arasındaki azami mesafe."

#: src/libslic3r/PrintConfig.cpp:3184
msgid "XY Size Compensation"
msgstr "XY Boyut Telafisi"

#: src/libslic3r/PrintConfig.cpp:3186
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"Nesne, XY düzleminde yapılandırılmış değerle büyütülecek / küçültülecektir "
"(negatif = içe, pozitif = dışarı doğru). Bu, ince ayar delik boyutları için "
"yararlı olabilir."

#: src/libslic3r/PrintConfig.cpp:3194
msgid "Z offset"
msgstr "Z ofset"

#: src/libslic3r/PrintConfig.cpp:3195
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"Bu değer G-code listesindeki tüm Z koordinatlarına eklenecek (veya "
"çıkartılacak). Hatalı Z limit anahtarı konumunu telafi etmek için "
"kullanılır: örneğin, limit anahtarı gerçekte nozülü tabladan 0.3 mm uzakta "
"bırakırsa, bunu -0.3 olarak ayarlayın (veya bu değeri 0 yapıp limit "
"anahtarınızı ayarlayın)."

#: src/libslic3r/PrintConfig.cpp:3204
msgid "Perimeter generator"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3206
msgid ""
"Classic perimeter generator produces perimeters with constant extrusion "
"width and for very thin areas is used gap-fill. Arachne engine produces "
"perimeters with variable extrusion width. This setting also affects the "
"Concentric infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3213
msgid "Classic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3214
msgid "Arachne"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3219
msgid "Perimeter transition length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3221
msgid ""
"When transitioning between different numbers of perimeters as the part "
"becomes thinner, a certain amount of space is allotted to split or join the "
"perimeter segments. If expressed as a percentage (for example 100%), it will "
"be computed based on the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3230
msgid "Perimeter transitioning filter margin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3232
msgid ""
"Prevent transitioning back and forth between one extra perimeter and one "
"less. This margin extends the range of extrusion widths which follow to "
"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
"Increasing this margin reduces the number of transitions, which reduces the "
"number of extrusion starts/stops and travel time. However, large extrusion "
"width variation can lead to under- or overextrusion problems. If expressed "
"as a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3245
msgid "Perimeter transitioning threshold angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3247
msgid ""
"When to create transitions between even and odd numbers of perimeters. A "
"wedge shape with an angle greater than this setting will not have "
"transitions and no perimeters will be printed in the center to fill the "
"remaining space. Reducing this setting reduces the number and length of "
"these center perimeters, but may leave gaps or overextrude."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3258
msgid "Perimeter distribution count"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3260
msgid ""
"The number of perimeters, counted from the center, over which the variation "
"needs to be spread. Lower values mean that the outer perimeters don't change "
"in width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3267
msgid "Minimum feature size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3269
msgid ""
"Minimum thickness of thin features. Model features that are thinner than "
"this value will not be printed, while features thicker than the Minimum "
"feature size will be widened to the Minimum perimeter width. If expressed as "
"a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3279
msgid "Minimum perimeter width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3281
msgid ""
"Width of the perimeter that will replace thin features (according to the "
"Minimum feature size) of the model. If the Minimum perimeter width is "
"thinner than the thickness of the feature, the perimeter will become as "
"thick as the feature itself. If expressed as a percentage (for example 85%), "
"it will be computed based on the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3346
msgid "Unavailable for this method.\n"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3350
msgid "Pinhead front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3352
msgid "Diameter of the pointing side of the head"
msgstr "Başın gösterdiği tarafın çapı"

#: src/libslic3r/PrintConfig.cpp:3359
msgid "Head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3361
msgid "How much the pinhead has to penetrate the model surface"
msgstr "Pinheadin model yüzeyine ne kadar nüfuz etmesi gerektiği"

#: src/libslic3r/PrintConfig.cpp:3368
msgid "Pinhead width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3370
msgid "Width from the back sphere center to the front sphere center"
msgstr "Arka küre merkezinden ön küre merkezine genişlik"

#: src/libslic3r/PrintConfig.cpp:3378
msgid "Pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3380
msgid "Diameter in mm of the support pillars"
msgstr "Destek direklerinin mm cinsinden çapı"

#: src/libslic3r/PrintConfig.cpp:3388
msgid "Small pillar diameter percent"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3390
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3403
msgid "Max bridges on a pillar"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3405
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3417
msgid "Max weight on model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3420
msgid ""
"Maximum weight of sub-trees that terminate on the model instead of the print "
"bed. The weight is the sum of the lenghts of all branches emanating from the "
"endpoint."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3432
msgid "Pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3433
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"İki komşu sütun arasındaki köprü tipini kontrol eder. İki sütunun mesafesine "
"bağlı olarak otomatik olarak ilk ikisi arasında geçiş yapacak zig-zag, "
"çapraz (çift zig-zag) veya dinamik olabilir."

#: src/libslic3r/PrintConfig.cpp:3441
msgid "Zig-Zag"
msgstr "Zikzaklı"

#: src/libslic3r/PrintConfig.cpp:3442
msgid "Cross"
msgstr "Çapraz"

#: src/libslic3r/PrintConfig.cpp:3443
msgid "Dynamic"
msgstr "Dinamik"

#: src/libslic3r/PrintConfig.cpp:3455
msgid "Pillar widening factor"
msgstr "Ayağı genişletme faktörü"

#: src/libslic3r/PrintConfig.cpp:3463
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase. The exact amount of "
"increase is unspecified and can change in the future."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3474
msgid "Support base diameter"
msgstr "Destek taban çapı"

#: src/libslic3r/PrintConfig.cpp:3476
msgid "Diameter in mm of the pillar base"
msgstr "Sütun tabanının mm cinsinden çapı"

#: src/libslic3r/PrintConfig.cpp:3484
msgid "Support base height"
msgstr "Destek taban yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3486
msgid "The height of the pillar base cone"
msgstr "Sütun tabanı konisinin yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3493
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3496
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3506
msgid "Critical angle"
msgstr "Kritik açı"

#: src/libslic3r/PrintConfig.cpp:3508
msgid "The default angle for connecting support sticks and junctions."
msgstr "Destek çubuklarını ve bağlantılarını bağlamak için varsayılan açı."

#: src/libslic3r/PrintConfig.cpp:3516
msgid "Max bridge length"
msgstr "En fazla köprü uzunluğu"

#: src/libslic3r/PrintConfig.cpp:3518
msgid "The max length of a bridge"
msgstr "Bir köprünün en fazla uzunluğu"

#: src/libslic3r/PrintConfig.cpp:3534
msgid "Max pillar linking distance"
msgstr "Max sütun bağlama mesafesi"

#: src/libslic3r/PrintConfig.cpp:3536
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""
"Birbiriyle bağlantı kurması için iki sütunun en fazla mesafesi. Sıfır "
"değeri, direk basamaklandırmasını yasaklar."

#: src/libslic3r/PrintConfig.cpp:3546
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3562
msgid "Display width"
msgstr "Ekran genişliği"

#: src/libslic3r/PrintConfig.cpp:3563
msgid "Width of the display"
msgstr "Ekranın genişliği"

#: src/libslic3r/PrintConfig.cpp:3568
msgid "Display height"
msgstr "Ekran yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3569
msgid "Height of the display"
msgstr "Ekran yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3574
msgid "Number of pixels in"
msgstr "Piksel sayısı"

#: src/libslic3r/PrintConfig.cpp:3576
msgid "Number of pixels in X"
msgstr "X'teki piksel sayısı"

#: src/libslic3r/PrintConfig.cpp:3582
msgid "Number of pixels in Y"
msgstr "Y cinsinden piksel sayısı"

#: src/libslic3r/PrintConfig.cpp:3587
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3588
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3589
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3594
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3595
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3596
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3601
msgid "Display orientation"
msgstr "Ekran yönü"

#: src/libslic3r/PrintConfig.cpp:3602
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"SLA yazıcısının içindeki LCD ekran yönünü ayarlayın. Portre modu, ekran "
"genişliği ve yükseklik parametrelerinin anlamını değiştirecek ve çıkış "
"görüntüleri 90 derece döndürülecektir."

#: src/libslic3r/PrintConfig.cpp:3608
msgid "Landscape"
msgstr "Peyzaj"

#: src/libslic3r/PrintConfig.cpp:3609
msgid "Portrait"
msgstr "Portre"

#: src/libslic3r/PrintConfig.cpp:3614 src/libslic3r/PrintConfig.cpp:4115
msgid "Fast"
msgstr "Hızlı"

#: src/libslic3r/PrintConfig.cpp:3615
msgid "Fast tilt"
msgstr "Hızlı eğim"

#: src/libslic3r/PrintConfig.cpp:3616
msgid "Time of the fast tilt"
msgstr "Hızlı yatırma zamanı"

#: src/libslic3r/PrintConfig.cpp:3623 src/libslic3r/PrintConfig.cpp:4114
msgid "Slow"
msgstr "Yavaş"

#: src/libslic3r/PrintConfig.cpp:3624
msgid "Slow tilt"
msgstr "Yavaş eğim"

#: src/libslic3r/PrintConfig.cpp:3625
msgid "Time of the slow tilt"
msgstr "Yavaş yatırma zamanı"

#: src/libslic3r/PrintConfig.cpp:3632 src/libslic3r/PrintConfig.cpp:4116
msgid "High viscosity"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3633
msgid "Tilt for high viscosity resin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3634
msgid "Time of the super slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3641
msgid "Area fill"
msgstr "Alan dolgusu"

#: src/libslic3r/PrintConfig.cpp:3642
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"Tabla alanının yüzdesi.\n"
"Baskı alanı belirtilen değeri aşarsa,\n"
"yavaş eğim kullanılır, aksi takdirde - hızlı eğim kullanılır"

#: src/libslic3r/PrintConfig.cpp:3649 src/libslic3r/PrintConfig.cpp:3650
#: src/libslic3r/PrintConfig.cpp:3651
msgid "Printer scaling correction"
msgstr "Yazıcı ölçeklendirme düzeltmesi"

#: src/libslic3r/PrintConfig.cpp:3657 src/libslic3r/PrintConfig.cpp:3659
msgid "Printer scaling correction in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3658
msgid "Printer scaling X axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3665 src/libslic3r/PrintConfig.cpp:3667
msgid "Printer scaling correction in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3666
msgid "Printer scaling Y axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3673 src/libslic3r/PrintConfig.cpp:3675
msgid "Printer scaling correction in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3674
msgid "Printer scaling Z axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3681 src/libslic3r/PrintConfig.cpp:3682
msgid "Printer absolute correction"
msgstr "Yazıcı mutlak düzeltme"

#: src/libslic3r/PrintConfig.cpp:3683
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""
"Dilimlenen 2D poligonları düzeltme işaretine göre şişirecek veya "
"söndürecektir."

#: src/libslic3r/PrintConfig.cpp:3689
msgid "Elephant foot minimum width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3691
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3698 src/libslic3r/PrintConfig.cpp:3699
msgid "Printer gamma correction"
msgstr "Yazıcı gama düzeltmesi"

#: src/libslic3r/PrintConfig.cpp:3700
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""
"Pikselleştirilmiş 2B poligonlara bir gama düzeltmesi uygulayacaktır. Sıfır "
"gamma değeri, ortadaki eşik ile eşik anlamına gelir. Bu davranış, "
"çokgenlerde delik kaybetmeden kenar bozulmalarını ortadan kaldırır."

#: src/libslic3r/PrintConfig.cpp:3719 src/libslic3r/PrintConfig.cpp:3720
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3731 src/libslic3r/PrintConfig.cpp:3732
msgid "Initial layer height"
msgstr "İlk katman yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3738
msgid "Idle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3739
msgid ""
"Nozzle temperature when the tool is currently not used in multi-tool setups."
"This is only used when 'Ooze prevention is active in Print Settings.'"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3747 src/libslic3r/PrintConfig.cpp:3748
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3749
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3754 src/libslic3r/PrintConfig.cpp:3755
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3756
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3763
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3770
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3775
msgid "Faded layers"
msgstr "Soluk katmanlar"

#: src/libslic3r/PrintConfig.cpp:3776
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""
"Maruz kalma süresi için gereken katman sayısı, ilk maruz kalma süresinden "
"maruz kalma süresine kadar kaybolur"

#: src/libslic3r/PrintConfig.cpp:3783 src/libslic3r/PrintConfig.cpp:3784
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3791 src/libslic3r/PrintConfig.cpp:3792
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3799 src/libslic3r/PrintConfig.cpp:3800
msgid "Exposure time"
msgstr "Pozlama süresi"

#: src/libslic3r/PrintConfig.cpp:3806 src/libslic3r/PrintConfig.cpp:3807
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3814 src/libslic3r/PrintConfig.cpp:3815
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3822 src/libslic3r/PrintConfig.cpp:3823
msgid "Initial exposure time"
msgstr "İlk maruz kalma süresi"

#: src/libslic3r/PrintConfig.cpp:3829 src/libslic3r/PrintConfig.cpp:3830
msgid "Correction for expansion"
msgstr "Genişleme için düzeltme"

#: src/libslic3r/PrintConfig.cpp:3836 src/libslic3r/PrintConfig.cpp:3837
msgid "Correction for expansion in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3843 src/libslic3r/PrintConfig.cpp:3844
msgid "Correction for expansion in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3850 src/libslic3r/PrintConfig.cpp:3851
msgid "Correction for expansion in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3857
msgid "SLA print material notes"
msgstr "SLA baskı malzemesi notları"

#: src/libslic3r/PrintConfig.cpp:3858
msgid "You can put your notes regarding the SLA print material here."
msgstr "SLA baskı malzemesi ile ilgili notlarınızı buraya yazabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:3870 src/libslic3r/PrintConfig.cpp:3881
msgid "Default SLA material profile"
msgstr "Varsayılan SLA malzeme profili"

#: src/libslic3r/PrintConfig.cpp:3892
msgid "Generate supports"
msgstr "Destek üret"

#: src/libslic3r/PrintConfig.cpp:3894
msgid "Generate supports for the models"
msgstr "Modeller için destek oluşturun"

#: src/libslic3r/PrintConfig.cpp:3899
msgid "Support tree type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3900
msgid "Support tree building strategy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3905
msgid "Branching (experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3914
msgid "Support only in enforced regions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3916
msgid "Only create support if it lies in a support enforcer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3923
msgid "This is a relative measure of support points density."
msgstr "Bu, destek noktalarının yoğunluğunun göreceli bir ölçüsüdür."

#: src/libslic3r/PrintConfig.cpp:3929
msgid "Minimal distance of the support points"
msgstr "Destek noktalarının en düşük mesafesi"

#: src/libslic3r/PrintConfig.cpp:3931
msgid "No support points will be placed closer than this threshold."
msgstr "Bu eşikten daha yakın hiçbir destek noktası yerleştirilmeyecektir."

#: src/libslic3r/PrintConfig.cpp:3937
msgid "Use pad"
msgstr "Ped kullan"

#: src/libslic3r/PrintConfig.cpp:3939
msgid "Add a pad underneath the supported model"
msgstr "Desteklenen modelin altına bir ped ekler"

#: src/libslic3r/PrintConfig.cpp:3944
msgid "Pad wall thickness"
msgstr "Ped duvar kalınlığı"

#: src/libslic3r/PrintConfig.cpp:3946
msgid "The thickness of the pad and its optional cavity walls."
msgstr "Pedin kalınlığı ve isteğe bağlı boşluk duvarları."

#: src/libslic3r/PrintConfig.cpp:3954
msgid "Pad wall height"
msgstr "Ped duvar yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3955
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""
"Ped boşluğu derinliğini tanımlar. Boşluğu devre dışı bırakmak için sıfıra "
"ayarlayın. Bu özelliği etkinleştirirken dikkatli olun, çünkü bazı reçineler "
"boşluğun içinde aşırı bir emme etkisi oluşturabilir ve bu da baskıyı "
"ayırmayı zorlaştırır."

#: src/libslic3r/PrintConfig.cpp:3968
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3969
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3979
msgid "Max merge distance"
msgstr "En fazla birleştirme mesafesi"

#: src/libslic3r/PrintConfig.cpp:3981
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"Bazı nesneler, tek bir büyük bir tane yerine birkaç daha küçük pedle "
"birlikte olabilir. Bu parametre iki küçük pedin ortasının ne kadar uzakta "
"olması gerektiğini tanımlar. Yaklaşırlarsa, bir pede birleştirilirler."

#: src/libslic3r/PrintConfig.cpp:4001
msgid "Pad wall slope"
msgstr "Ped duvar eğimi"

#: src/libslic3r/PrintConfig.cpp:4003
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""
"Ped duvarının tabla düzlemine göre eğimi. 90 derece, düz duvarlar anlamına "
"gelir."

#: src/libslic3r/PrintConfig.cpp:4014
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4019
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4021
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4026
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4028
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4037
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4039
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4046
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4048
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4055
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4058
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4065
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4067
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4072
msgid "Wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4074
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4082
msgid "Accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4084
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4094
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4106
msgid "Print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4108
msgid ""
"A slower printing profile might be necessary when using materials with "
"higher viscosity or with some hollowed parts. It slows down the tilt "
"movement and adds a delay before exposure."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4121
msgid "Format of the output SLA archive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4126
msgid "SLA output precision"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4127
msgid "Minimum resolution in nanometers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4595
msgid "Export OBJ"
msgstr "OBJ olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4596
msgid "Export the model(s) as OBJ."
msgstr "Model(ler)i OBJ olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4607
msgid "Export SLA"
msgstr "SLA olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4608
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""
"Modeli dilimleyin ve SLA yazdırma katmanlarını PNG olarak dışa aktarın."

#: src/libslic3r/PrintConfig.cpp:4613
msgid "Export 3MF"
msgstr "3MF Olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4614
msgid "Export the model(s) as 3MF."
msgstr "Model(ler)i 3MF olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4618
msgid "Export AMF"
msgstr "AMF Olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4619
msgid "Export the model(s) as AMF."
msgstr "Model(ler)i AMF olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4623
msgid "Export STL"
msgstr "STL olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4624
msgid "Export the model(s) as STL."
msgstr "Model(ler)i STL olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4629
msgid "Slice the model and export toolpaths as G-code."
msgstr "Modeli dilimleyin ve takım yollarını G kodu olarak dışa aktarın."

#: src/libslic3r/PrintConfig.cpp:4634
msgid "G-code viewer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4635
msgid "Visualize an already sliced and saved G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4641
msgid "OpenGL version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4642
msgid "Select the specified OpenGL version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4647
msgid "OpenGL debug output"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4648
msgid "Activate OpenGL debug output on graphic cards which support it"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4654
msgid "Slice"
msgstr "Dilim"

#: src/libslic3r/PrintConfig.cpp:4655
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""
"Modeli, printer_technology yapılandırma değerine göre FFF veya SLA olarak "
"dilimleyin."

#: src/libslic3r/PrintConfig.cpp:4660
msgid "Help"
msgstr "Yardım"

#: src/libslic3r/PrintConfig.cpp:4661
msgid "Show this help."
msgstr "Bu yardımı göster."

#: src/libslic3r/PrintConfig.cpp:4666
msgid "Help (FFF options)"
msgstr "Yardım (FFF seçenekleri)"

#: src/libslic3r/PrintConfig.cpp:4667
msgid "Show the full list of print/G-code configuration options."
msgstr "Baskı/G-code yapılandırma seçeneklerinin tam listesini göster."

#: src/libslic3r/PrintConfig.cpp:4671
msgid "Help (SLA options)"
msgstr "Yardım (SLA seçenekleri)"

#: src/libslic3r/PrintConfig.cpp:4672
msgid "Show the full list of SLA print configuration options."
msgstr "SLA yazdırma yapılandırma seçeneklerinin tam listesini göster."

#: src/libslic3r/PrintConfig.cpp:4676
msgid "Output Model Info"
msgstr "Çıktı Model Bilgisi"

#: src/libslic3r/PrintConfig.cpp:4677
msgid "Write information about the model to the console."
msgstr "Modelle ilgili bilgileri konsola yazın."

#: src/libslic3r/PrintConfig.cpp:4681
msgid "Save config file"
msgstr "Konfigürasyon dosyasını kaydet"

#: src/libslic3r/PrintConfig.cpp:4682
msgid "Save configuration to the specified file."
msgstr "Yapılandırmayı belirtilen dosyaya kaydeder."

#: src/libslic3r/PrintConfig.cpp:4692
msgid "Align XY"
msgstr "XY'yi Hizala"

#: src/libslic3r/PrintConfig.cpp:4693
msgid "Align the model to the given point."
msgstr "Modeli verilen noktaya hizala."

#: src/libslic3r/PrintConfig.cpp:4698
msgid "Cut model at the given Z."
msgstr "Modeli belirtilen Z seviyesinden kes."

#: src/libslic3r/PrintConfig.cpp:4719
msgid "Center"
msgstr "Merkez"

#: src/libslic3r/PrintConfig.cpp:4720
msgid "Center the print around the given center."
msgstr "Baskıyı verilen merkezin çevresine ortala."

#: src/libslic3r/PrintConfig.cpp:4724
msgid "Don't arrange"
msgstr "Düzenleme"

#: src/libslic3r/PrintConfig.cpp:4725
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""
"Birleştirmeden ve orijinal XY koordinatlarını saklamadan modelleri yeniden "
"düzenleme."

#: src/libslic3r/PrintConfig.cpp:4728
msgid "Ensure on bed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4729
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4733
msgid "Duplicate"
msgstr "Çoğalt"

#: src/libslic3r/PrintConfig.cpp:4734
msgid "Multiply copies by this factor."
msgstr "Kopyaları bu faktörle çarpın."

#: src/libslic3r/PrintConfig.cpp:4738
msgid "Duplicate by grid"
msgstr "Kılavuza göre çoğalt"

#: src/libslic3r/PrintConfig.cpp:4739
msgid "Multiply copies by creating a grid."
msgstr "Izgara oluşturarak kopyaları çarpın."

#: src/libslic3r/PrintConfig.cpp:4743
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"Tedarik edilen modelleri bir plaka içinde düzenleyin ve bir kez işlem yapmak "
"için bunları tek bir modelde birleştirin."

#: src/libslic3r/PrintConfig.cpp:4748
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"Herhangi bir manifold olmayan örgüyü onarmaya çalışın (bu seçenek, istenen "
"eylemi gerçekleştirmek için modeli dilimlememiz gerektiğinde dolaylı olarak "
"eklenir)."

#: src/libslic3r/PrintConfig.cpp:4752
msgid "Rotation angle around the Z axis in degrees."
msgstr "Z ekseni etrafındaki dönüş açısı, derece olarak."

#: src/libslic3r/PrintConfig.cpp:4756
msgid "Rotate around X"
msgstr "X etrafında döndür"

#: src/libslic3r/PrintConfig.cpp:4757
msgid "Rotation angle around the X axis in degrees."
msgstr "X ekseni etrafındaki dönüş açısı, derece olarak."

#: src/libslic3r/PrintConfig.cpp:4761
msgid "Rotate around Y"
msgstr "Y etrafında döndür"

#: src/libslic3r/PrintConfig.cpp:4762
msgid "Rotation angle around the Y axis in degrees."
msgstr "Y ekseni etrafındaki dönüş açısı, derece olarak."

#: src/libslic3r/PrintConfig.cpp:4767
msgid "Scaling factor or percentage."
msgstr "Ölçekleme faktörü veya yüzdesi."

#: src/libslic3r/PrintConfig.cpp:4772
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""
"Modellerde bağlı olmayan parçaları tespit et ve bunları ayrı nesnelere böl."

#: src/libslic3r/PrintConfig.cpp:4775
msgid "Scale to Fit"
msgstr "Uygun ölçek"

#: src/libslic3r/PrintConfig.cpp:4776
msgid "Scale to fit the given volume."
msgstr "Verilen hacme uyması için ölçeklendirin."

#: src/libslic3r/PrintConfig.cpp:4780
msgid "Delete files after loading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4781
msgid "Delete files after loading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4789
msgid "Ignore non-existent config files"
msgstr "Var olmayan config dosyalarını yoksay"

#: src/libslic3r/PrintConfig.cpp:4790
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "Do not fail if a file supplied to --load does not exist."

#: src/libslic3r/PrintConfig.cpp:4793
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4794
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4801
msgid "Bail out on unknown configuration values"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4802
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4803
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4807
msgid "Load config file"
msgstr "Konfigürasyon dosyası yükle"

#: src/libslic3r/PrintConfig.cpp:4808
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""
"Belirtilen dosyadan yapılandırmayı yükle. Seçenekleri birden fazla dosyadan "
"yüklemek için birden fazla kez kullanılabilir."

#: src/libslic3r/PrintConfig.cpp:4811
msgid "Output File"
msgstr "Çıktı dosyası"

#: src/libslic3r/PrintConfig.cpp:4812
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""
"Çıktının yazılacağı dosya (belirtilmemişse girdi dosyasına dayanacaktır)."

#: src/libslic3r/PrintConfig.cpp:4816
msgid "Single instance mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4817
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4828
msgid "Data directory"
msgstr "Veri dizini"

#: src/libslic3r/PrintConfig.cpp:4829
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"Ayarları verilen dizine yükleyin ve saklayın. Bu, farklı profilleri korumak "
"için veya bir ağ depolama birimindeki yapılandırmaları dahil etmek için "
"kullanışlıdır."

#: src/libslic3r/PrintConfig.cpp:4832
msgid "Logging level"
msgstr "Günlük seviyesi"

#: src/libslic3r/PrintConfig.cpp:4833
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4839
msgid "Render with a software renderer"
msgstr "Bir yazılım oluşturucuyla işleme"

#: src/libslic3r/PrintConfig.cpp:4840
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""
"Bir yazılım oluşturucuyla renderleyin. Birlikte verilen MESA yazılım "
"oluşturucusu, varsayılan OpenGL sürücüsü yerine yüklenir."

#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr "Zip arşivinde hata"

#: src/libslic3r/PrintObject.cpp:136
msgid "Generating perimeters"
msgstr "Duvar oluşturma"

#: src/libslic3r/PrintObject.cpp:241
msgid "Preparing infill"
msgstr "Dolgu hazırlama"

#: src/libslic3r/PrintObject.cpp:420
msgid "Searching support spots"
msgstr ""

#: src/libslic3r/PrintObject.cpp:441
msgid "Generating support material"
msgstr "Destek oluşturma"

#: src/libslic3r/PrintObject.cpp:462
msgid "Estimating curled extrusions"
msgstr ""

#: resources/data/hints.ini: [hint:Fuzzy skin]
msgid ""
"Fuzzy skin\n"
"Did you know that you can create rough fibre-like texture on the sides of "
"your models using the<a>Fuzzy skin</a>feature? You can also use modifiers to "
"apply fuzzy-skin only to a portion of your model."
msgstr ""

#: resources/data/hints.ini: [hint:Shapes gallery]
msgid ""
"Shapes gallery\n"
"Did you know that PrusaSlicer has a Shapes Gallery? You can use the included "
"models as modifiers, negative volumes or as printable objects. Right-click "
"the platter and select<a>Add Shape - Gallery</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Arrange settings]
msgid ""
"Arrange settings\n"
"Did you know that you can right-click the<a>Arrange icon</a>to adjust the "
"size of the gap between objects and to allow automatic rotations?"
msgstr ""

#: resources/data/hints.ini: [hint:Negative volume]
msgid ""
"Negative volume\n"
"Did you know that you can subtract one mesh from another using the Negative "
"volume modifier? That way you can, for example, create easily resizable "
"holes directly in PrusaSlicer. Read more in the documentation. (Requires "
"Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Simplify mesh]
msgid ""
"Simplify mesh\n"
"Did you know that you can reduce the number of triangles in a mesh using the "
"Simplify mesh feature? Right-click the model and select Simplify model. Read "
"more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Reload from disk]
msgid ""
"Reload from disk\n"
"Did you know that if you created a newer version of your model, you can "
"simply reload it in PrusaSlicer? Right-click the model in the 3D view and "
"choose Reload from disk. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Hiding sidebar]
msgid ""
"Hiding sidebar\n"
"Did you know that you can hide the right sidebar using the shortcut <b>Shift"
"+Tab</b>? You can also enable the icon for this from the<a>Preferences</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Perspective camera]
msgid ""
"Perspective camera\n"
"Did you know that you can use the <b>K</b> key to quickly switch between an "
"orthographic and perspective camera?"
msgstr ""

#: resources/data/hints.ini: [hint:Camera Views]
msgid ""
"Camera Views\n"
"Did you know that you can use the number keys <b>0-6</b> to quickly switch "
"between predefined camera angles?"
msgstr ""

#: resources/data/hints.ini: [hint:Place on face]
msgid ""
"Place on face\n"
"Did you know that you can quickly orient a model so that one of its faces "
"sits on the print bed? Select the<a>Place on face</a>function or press the "
"<b>F</b> key."
msgstr ""

#: resources/data/hints.ini: [hint:Set number of instances]
msgid ""
"Set number of instances\n"
"Did you know that you can right-click a model and set an exact number of "
"instances instead of copy-pasting it several times?"
msgstr ""

#: resources/data/hints.ini: [hint:Combine infill]
msgid ""
"Combine infill\n"
"Did you know that you can print the infill with a higher layer height "
"compared to perimeters to save print time using the setting<a>Combine infill "
"every</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Variable layer height]
msgid ""
"Variable layer height\n"
"Did you know that you can print different regions of your model with a "
"different layer height and smooth the transitions between them? Try "
"the<a>Variable layer height tool</a>. (Not available for SLA printers.)"
msgstr ""

#: resources/data/hints.ini: [hint:Undo/redo history]
msgid ""
"Undo/redo history\n"
"Did you know that you can right-click the<a>undo/redo arrows</a>to see the "
"history of changes and to undo or redo several actions at once?"
msgstr ""

#: resources/data/hints.ini: [hint:Different layer height for each model]
msgid ""
"Different layer height for each model\n"
"Did you know that you can print each model on the plater with a different "
"layer height? Right-click the model in the 3D view, choose Layers and "
"Perimeters and adjust the values in the right panel. Read more in the "
"documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Solid infill threshold area]
msgid ""
"Solid infill threshold area\n"
"Did you know that you can make parts of your model with a small cross-"
"section be filled with solid infill automatically? Set the<a>Solid infill "
"threshold area</a>. (Expert mode only.)"
msgstr ""

#: resources/data/hints.ini: [hint:Search functionality]
msgid ""
"Search functionality\n"
"Did you know that you use the<a>Search</a>tool to quickly find a specific "
"PrusaSlicer setting? Or use the familiar shortcut <b>Ctrl+F</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Box selection]
msgid ""
"Box selection\n"
"Did you know that you can do a box selection with Shift+Mouse drag? You can "
"also box-deselect objects with <b>Alt+Mouse drag</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Zoom on selected objects or all if none
#: selected]
msgid ""
"Zoom on selected objects or on all objects if none selected\n"
"Did you know that you can zoom in on selected objects by pressing the <b>Z</"
"b> key? If none are selected, the camera will zoom on all objects in the "
"scene."
msgstr ""

#: resources/data/hints.ini: [hint:Printable toggle]
msgid ""
"Printable toggle\n"
"Did you know that you can disable the G-code generation for the selected "
"model without having to move or delete it? Toggle the Printable property of "
"a model from the Right-click context menu."
msgstr ""

#: resources/data/hints.ini: [hint:Mirror]
msgid ""
"Mirror\n"
"Did you know that you can mirror the selected model to create a reversed "
"version of it? Right-click the model, select Mirror and pick the mirror axis."
msgstr ""

#: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45
#: degrees]
msgid ""
"PageUp / PageDown quick rotation by 45 degrees\n"
"Did you know that you can quickly rotate selected models by 45 degrees "
"around the Z-axis clockwise or counter-clockwise by pressing <b>Page Up</b> "
"or <b>Page Down</b> respectively?"
msgstr ""

#: resources/data/hints.ini: [hint:Load config from G-code]
msgid ""
"Load config from G-code\n"
"Did you know that you can use File-Import-Import Config to load print, "
"filament and printer profiles from an existing G-code file? Similarly, you "
"can use File-Import-Import SL1 / SL1S archive, which also lets you "
"reconstruct 3D models from the voxel data."
msgstr ""

#: resources/data/hints.ini: [hint:Ironing]
msgid ""
"Ironing\n"
"Did you know that you can smooth top surfaces of prints using Ironing? The "
"nozzle will run a special second infill phase at the same layer to fill in "
"holes and flatten any lifted plastic. Read more in the documentation. "
"(Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on supports]
msgid ""
"Paint-on supports\n"
"Did you know that you can paint directly on the object and select areas, "
"where supports should be enforced or blocked? Try the<a>Paint-on supports</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on seam]
msgid ""
"Paint-on seam\n"
"Did you know that you can paint directly on the object and select where to "
"place the start/endpoint of each perimeter loop? Try the<a>Seam painting</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Insert Pause]
msgid ""
"Insert Pause\n"
"Did you know that you can schedule the print to pause at a specific layer? "
"Right-click the layer slider in the Preview and select Add pause print "
"(M601). This can be used to insert magnets, weights or nuts into your "
"prints. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Insert Custom G-code]
msgid ""
"Insert Custom G-code\n"
"Did you know that you can insert a custom G-code at a specific layer? Left-"
"click the layer in the Preview, Right-click the plus icon and select Add "
"custom G-code. With this function you can, for example, create a temperature "
"tower. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Configuration snapshots]
msgid ""
"Configuration snapshots\n"
"Did you know that you can roll back to a complete backup of all system and "
"user profiles? You can view and move back and forth between snapshots using "
"the Configuration - <a>Configuration snapshots menu</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Minimum shell thickness]
msgid ""
"Minimum shell thickness\n"
"Did you know that instead of the number of top and bottom layers, you can "
"define the<a>Minimum shell thickness</a>in millimeters? This feature is "
"especially useful when using the variable layer height function."
msgstr ""

#: resources/data/hints.ini: [hint:Settings in non-modal window]
msgid ""
"Settings in non-modal window\n"
"Did you know that you can open the Settings in a new non-modal window? This "
"means you can have settings open on one screen and the G-code Preview on the "
"other. Go to the<a>Preferences</a>and select Settings in non-modal window."
msgstr ""

#: resources/data/hints.ini: [hint:Adaptive infills]
msgid ""
"Adaptive infills\n"
"Did you know that you can use the Adaptive cubic and Support cubic infills "
"to decrease the print time and lower the filament consumption? Read more in "
"the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Lightning infill]
msgid ""
"Lightning infill\n"
"Did you know that you can use the Lightning infill to support only the top "
"surfaces, save a lot of the filament, and decrease the print time? Read more "
"in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Fullscreen mode]
msgid ""
"Fullscreen mode\n"
"Did you know that you can switch PrusaSlicer to fullscreen mode? Use the "
"<b>F11</b> hotkey."
msgstr ""

#: resources/data/hints.ini: [hint:Printables integration]
msgid ""
"Printables.com integration\n"
"Did you know that when you are browsing Printables.com, you can send 3D "
"model files to PrusaSlicer with a single click? Learn more in the "
"documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Cut tool]
msgid ""
"Cut tool\n"
"Did you know that you can cut a model at any angle and even create aligning "
"pins with the updated Cut tool? Learn more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Measurement tool]
msgid ""
"Measurement tool\n"
"Did you know that you can measure the distances between points, edges and "
"planes, the radius of a hole or the angle between edges or planes? Learn "
"more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Text tool]
msgid ""
"Text tool\n"
"Did you know that you can add custom text labels to your models or even use "
"the text as a modifier? Learn more in the documentation."
msgstr ""

#: ../src/common/debugrpt.cpp:586
msgid ""
"\n"
"Please send this report to the program maintainer, thank you!\n"
msgstr ""
"\n"
"Lütfen bu raporu program geliştiricisine gönderin, teşekkürler!\n"

#: ../src/richtext/richtextstyledlg.cpp:210
#: ../src/richtext/richtextstyledlg.cpp:222
msgid " "
msgstr " "

#: ../src/generic/dbgrptg.cpp:326
msgid "              Thank you and we're sorry for the inconvenience!\n"
msgstr "              Teşekkürler, yaşadığınız sorundan dolayı özür dileriz!\n"

#: ../src/common/prntbase.cpp:573
#, c-format
msgid " (copy %d of %d)"
msgstr " (kopya %d / %d)"

#: ../src/common/log.cpp:421
#, c-format
msgid " (error %ld: %s)"
msgstr " (hata %ld: %s)"

#: ../src/common/imagtiff.cpp:72
#, c-format
msgid " (in module \"%s\")"
msgstr " (\"%s\" modülünde)"

#: ../src/osx/core/secretstore.cpp:138
msgid " (while overwriting an existing item)"
msgstr " (varolan bir ögenin üzerine yazılırken)"

#: ../src/common/docview.cpp:1642
msgid " - "
msgstr " - "

#: ../src/richtext/richtextprint.cpp:593 ../src/html/htmprint.cpp:714
msgid " Preview"
msgstr " Önizleme"

#: ../src/common/fontcmn.cpp:824
msgid " bold"
msgstr " koyu"

#: ../src/common/fontcmn.cpp:840
msgid " italic"
msgstr " yatık"

#: ../src/common/fontcmn.cpp:820
msgid " light"
msgstr " açık"

#: ../src/common/fontcmn.cpp:807
msgid " strikethrough"
msgstr " üstü çizili"

#: ../src/common/paper.cpp:117
msgid "#10 Envelope, 4 1/8 x 9 1/2 in"
msgstr "#10 Zarf, 4 1/8 x 9 1/2 inç"

#: ../src/common/paper.cpp:118
msgid "#11 Envelope, 4 1/2 x 10 3/8 in"
msgstr "#11 Zarf, 4 1/2 x 10 3/8 inç"

#: ../src/common/paper.cpp:119
msgid "#12 Envelope, 4 3/4 x 11 in"
msgstr "#12 Zarf, 4 3/4 x 11 inç"

#: ../src/common/paper.cpp:120
msgid "#14 Envelope, 5 x 11 1/2 in"
msgstr "#14 Zarf, 5 x 11 1/2 inç"

#: ../src/common/paper.cpp:116
msgid "#9 Envelope, 3 7/8 x 8 7/8 in"
msgstr "#9 Zarf, 3 7/8 x 8 7/8 inç"

#: ../src/html/helpwnd.cpp:1031
#, c-format
msgid "%d of %lu"
msgstr "%d / %lu"

#: ../src/html/helpwnd.cpp:1678
#, c-format
msgid "%i of %u"
msgstr "%i / %u"

#: ../src/generic/filectrlg.cpp:279
#, c-format
msgid "%ld byte"
msgid_plural "%ld bytes"
msgstr[0] "%ld bayt"

#: ../src/html/helpwnd.cpp:1033
#, c-format
msgid "%lu of %lu"
msgstr "%lu / %lu"

#: ../src/generic/datavgen.cpp:6028
#, c-format
msgid "%s (%d items)"
msgstr "%s (%d öge)"

#: ../src/common/cmdline.cpp:1221
#, c-format
msgid "%s (or %s)"
msgstr "%s (ya da %s)"

#: ../src/generic/logg.cpp:224
#, c-format
msgid "%s Error"
msgstr "%s Hata"

#: ../src/generic/logg.cpp:236
#, c-format
msgid "%s Information"
msgstr "%s Bilgileri"

#: ../src/generic/preferencesg.cpp:113
#, c-format
msgid "%s Preferences"
msgstr "%s Ayarları"

#: ../src/generic/logg.cpp:228
#, c-format
msgid "%s Warning"
msgstr "%s Uyarı"

#: ../src/common/tarstrm.cpp:1319
#, c-format
msgid "%s did not fit the tar header for entry '%s'"
msgstr "%s '%s' kaydının tar başlığına sığmadı"

#: ../src/common/fldlgcmn.cpp:124
#, c-format
msgid "%s files (%s)|%s"
msgstr "%s dosya (%s)|%s"

#: ../src/html/helpwnd.cpp:1716
#, c-format
msgid "%u of %u"
msgstr "%u / %u"

#: ../src/common/stockitem.cpp:139
msgid "&About"
msgstr "H&akkında"

#: ../src/common/stockitem.cpp:207
msgid "&Actual Size"
msgstr "&Geçerli Boyut"

#: ../src/richtext/richtextindentspage.cpp:262
msgid "&After a paragraph:"
msgstr "P&aragraftan sonra:"

#: ../src/richtext/richtextindentspage.cpp:128
#: ../src/richtext/richtextliststylepage.cpp:319
msgid "&Alignment"
msgstr "Hiz&alama"

#: ../src/common/stockitem.cpp:141
msgid "&Apply"
msgstr "Uygul&a"

#: ../src/richtext/richtextstyledlg.cpp:251
msgid "&Apply Style"
msgstr "Biçemi Uygul&a"

#: ../src/msw/mdi.cpp:179
msgid "&Arrange Icons"
msgstr "Si&mgeleri Düzenle"

#: ../src/common/stockitem.cpp:195
msgid "&Ascending"
msgstr "&Artan"

#: ../src/common/stockitem.cpp:142
msgid "&Back"
msgstr "&Geri"

#: ../src/richtext/richtextstylepage.cpp:115
msgid "&Based on:"
msgstr "&Kaynak:"

#: ../src/richtext/richtextindentspage.cpp:253
msgid "&Before a paragraph:"
msgstr "&Paragraftan önce:"

#: ../src/richtext/richtextfontpage.cpp:262
msgid "&Bg colour:"
msgstr "&Art alan rengi:"

#: ../src/richtext/richtextbackgroundpage.cpp:298
msgid "&Blur distance:"
msgstr "&Bulanıklık uzaklığı:"

#: ../src/common/stockitem.cpp:143
msgid "&Bold"
msgstr "&Koyu"

#: ../src/common/stockitem.cpp:144
msgid "&Bottom"
msgstr "Al&t"

#: ../src/richtext/richtextborderspage.cpp:345
#: ../src/richtext/richtextborderspage.cpp:513
#: ../src/richtext/richtextmarginspage.cpp:259
#: ../src/richtext/richtextmarginspage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:637
#: ../src/richtext/richtextsizepage.cpp:644
msgid "&Bottom:"
msgstr "Al&t:"

#: ../include/wx/richtext/richtextbuffer.h:3866
msgid "&Box"
msgstr "&Kutu"

#: ../src/richtext/richtextliststylepage.cpp:210
#: ../src/richtext/richtextbulletspage.cpp:146
msgid "&Bullet style:"
msgstr "&Madde imi biçemi:"

#: ../src/common/stockitem.cpp:146
msgid "&CD-Rom"
msgstr "&CD-Rom"

#: ../src/generic/wizard.cpp:434 ../src/generic/fontdlgg.cpp:470
#: ../src/generic/fontdlgg.cpp:489 ../src/osx/carbon/fontdlg.cpp:402
#: ../src/common/dlgcmn.cpp:279 ../src/common/stockitem.cpp:145
msgid "&Cancel"
msgstr "İ&ptal"

#: ../src/msw/mdi.cpp:175
msgid "&Cascade"
msgstr "Arka arkaya &diz"

#: ../include/wx/richtext/richtextbuffer.h:5960
msgid "&Cell"
msgstr "&Hücre"

#: ../src/richtext/richtextsymboldlg.cpp:439
msgid "&Character code:"
msgstr "&Karakter kodu:"

#: ../src/common/stockitem.cpp:147
msgid "&Clear"
msgstr "T&emizle"

#: ../src/generic/logg.cpp:516 ../src/common/stockitem.cpp:148
#: ../src/common/prntbase.cpp:1600 ../src/univ/themes/win32.cpp:3756
msgid "&Close"
msgstr "&Kapat"

#: ../src/common/stockitem.cpp:193
msgid "&Color"
msgstr "&Renk"

#: ../src/richtext/richtextfontpage.cpp:249
msgid "&Colour:"
msgstr "&Renk:"

#: ../src/common/stockitem.cpp:149
msgid "&Convert"
msgstr "&Dönüştür"

#: ../src/generic/hyperlinkg.cpp:156
msgid "&Copy URL"
msgstr "İnternet Adresini K&opyala"

#: ../src/common/headerctrlcmn.cpp:306
msgid "&Customize..."
msgstr "Ö&zelleştir..."

#: ../src/generic/dbgrptg.cpp:334
msgid "&Debug report preview:"
msgstr "&Hata ayıklama raporu ön izlemesi:"

#: ../src/richtext/richtexttabspage.cpp:138
#: ../src/richtext/richtextctrl.cpp:335 ../src/osx/textctrl_osx.cpp:579
#: ../src/common/stockitem.cpp:152 ../src/msw/textctrl.cpp:2510
msgid "&Delete"
msgstr "&Sil"

#: ../src/richtext/richtextstyledlg.cpp:269
msgid "&Delete Style..."
msgstr "&Biçemi Sil..."

#: ../src/common/stockitem.cpp:196
msgid "&Descending"
msgstr "A&zalan"

#: ../src/generic/logg.cpp:682
msgid "&Details"
msgstr "&Ayrıntılar"

#: ../src/common/stockitem.cpp:153
msgid "&Down"
msgstr "&Aşağı"

#: ../src/richtext/richtextstyledlg.cpp:263
msgid "&Edit Style..."
msgstr "Biçemi Düz&enle..."

#: ../src/common/stockitem.cpp:155
msgid "&Execute"
msgstr "&Yürüt"

#: ../src/common/stockitem.cpp:158
msgid "&Find"
msgstr "B&ul"

#: ../src/common/stockitem.cpp:159
msgid "&First"
msgstr "İ&lk"

#: ../src/richtext/richtextsizepage.cpp:244
msgid "&Floating mode:"
msgstr "&Yüzer kip:"

#: ../src/common/stockitem.cpp:160
msgid "&Floppy"
msgstr "&Esnek"

#: ../src/common/stockitem.cpp:194
msgid "&Font"
msgstr "&Yazı türü"

#: ../src/generic/fontdlgg.cpp:371
msgid "&Font family:"
msgstr "&Yazı türü ailesi:"

#: ../src/richtext/richtextliststylepage.cpp:194
msgid "&Font for Level..."
msgstr "&Düzeyin yazı türü..."

#: ../src/richtext/richtextfontpage.cpp:147
#: ../src/richtext/richtextsymboldlg.cpp:400
msgid "&Font:"
msgstr "&Yazı türü:"

#: ../src/common/stockitem.cpp:161
msgid "&Forward"
msgstr "İ&leri"

#: ../src/richtext/richtextsymboldlg.cpp:451
msgid "&From:"
msgstr "&Kaynak:"

#: ../src/common/stockitem.cpp:162
msgid "&Harddisk"
msgstr "&Sabit disk"

#: ../src/richtext/richtextsizepage.cpp:351
#: ../src/richtext/richtextsizepage.cpp:358
msgid "&Height:"
msgstr "&Yükseklik:"

#: ../include/wx/richmsgdlg.h:30
msgid "&Hide details"
msgstr "Ayrıntıları &gizle"

#: ../src/common/stockitem.cpp:164
msgid "&Home"
msgstr "&Açılış"

#: ../src/richtext/richtextbackgroundpage.cpp:212
msgid "&Horizontal offset:"
msgstr "&Yatay öteleme:"

#: ../src/richtext/richtextindentspage.cpp:184
#: ../src/richtext/richtextliststylepage.cpp:372
msgid "&Indentation (tenths of a mm)"
msgstr "İçe&rlek (1/10mm ölçeğinde)"

#: ../src/richtext/richtextindentspage.cpp:167
#: ../src/richtext/richtextliststylepage.cpp:356
msgid "&Indeterminate"
msgstr "&Belirsiz"

#: ../src/common/stockitem.cpp:166
msgid "&Index"
msgstr "D&izin"

#: ../src/common/stockitem.cpp:167
msgid "&Info"
msgstr "&Bilgiler"

#: ../src/common/stockitem.cpp:168
msgid "&Italic"
msgstr "&Yatık"

#: ../src/common/stockitem.cpp:169
msgid "&Jump to"
msgstr "A&tla"

#: ../src/richtext/richtextindentspage.cpp:153
#: ../src/richtext/richtextliststylepage.cpp:342
msgid "&Justified"
msgstr "&Hizalanmış"

#: ../src/common/stockitem.cpp:174
msgid "&Last"
msgstr "&Son"

#: ../src/richtext/richtextindentspage.cpp:139
#: ../src/richtext/richtextliststylepage.cpp:328
msgid "&Left"
msgstr "So&l"

#: ../src/richtext/richtextindentspage.cpp:195
#: ../src/richtext/richtextborderspage.cpp:243
#: ../src/richtext/richtextborderspage.cpp:411
#: ../src/richtext/richtextliststylepage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:186
#: ../src/richtext/richtextmarginspage.cpp:300
#: ../src/richtext/richtextsizepage.cpp:532
#: ../src/richtext/richtextsizepage.cpp:539
msgid "&Left:"
msgstr "So&l:"

#: ../src/richtext/richtextliststylepage.cpp:183
msgid "&List level:"
msgstr "&Liste düzeyi:"

#: ../src/generic/logg.cpp:517
msgid "&Log"
msgstr "Gün&lük"

#: ../src/univ/themes/win32.cpp:3748
msgid "&Move"
msgstr "&Taşı"

#: ../src/richtext/richtextsizepage.cpp:672
msgid "&Move the object to:"
msgstr "&Nesneyi şuraya taşı:"

#: ../src/common/stockitem.cpp:175
msgid "&Network"
msgstr "&Ağ"

#: ../src/richtext/richtexttabspage.cpp:132 ../src/common/stockitem.cpp:176
msgid "&New"
msgstr "Ye&ni"

#: ../src/aui/tabmdi.cpp:111 ../src/generic/mdig.cpp:100 ../src/msw/mdi.cpp:180
msgid "&Next"
msgstr "So&nraki"

#: ../src/richtext/richtextsizepage.cpp:681
msgid "&Next Paragraph"
msgstr "So&nraki Paragraf"

#: ../src/generic/tipdlg.cpp:240
msgid "&Next Tip"
msgstr "So&nraki İpucu"

#: ../src/richtext/richtextstylepage.cpp:125
msgid "&Next style:"
msgstr "So&nraki biçem:"

#: ../src/common/stockitem.cpp:177 ../src/msw/msgdlg.cpp:441
msgid "&No"
msgstr "&Hayır"

#: ../src/generic/dbgrptg.cpp:356
msgid "&Notes:"
msgstr "&Notlar:"

#: ../src/richtext/richtextbulletspage.cpp:251
msgid "&Number:"
msgstr "&Sayı:"

#: ../src/generic/fontdlgg.cpp:475 ../src/generic/fontdlgg.cpp:482
#: ../src/osx/carbon/fontdlg.cpp:408 ../src/common/stockitem.cpp:178
msgid "&OK"
msgstr "&Tamam"

#: ../src/generic/dbgrptg.cpp:342 ../src/common/stockitem.cpp:179
msgid "&Open..."
msgstr "&Aç..."

#: ../src/richtext/richtextindentspage.cpp:222
msgid "&Outline level:"
msgstr "Başlık &düzeyi:"

#: ../src/richtext/richtextindentspage.cpp:293
msgid "&Page Break"
msgstr "&Sayfa Sonu"

#: ../include/wx/richtext/richtextbuffer.h:5010
msgid "&Picture"
msgstr "&Görsel"

#: ../src/generic/fontdlgg.cpp:422
msgid "&Point size:"
msgstr "Yazı &boyutu:"

#: ../src/richtext/richtexttabspage.cpp:110
msgid "&Position (tenths of a mm):"
msgstr "&Konum (1/10mm):"

#: ../src/richtext/richtextsizepage.cpp:514
msgid "&Position mode:"
msgstr "&Konum kipi:"

#: ../src/aui/tabmdi.cpp:112 ../src/generic/mdig.cpp:101 ../src/msw/mdi.cpp:181
msgid "&Previous"
msgstr "Ö&nceki"

#: ../src/richtext/richtextsizepage.cpp:675
msgid "&Previous Paragraph"
msgstr "Önceki &Paragraf"

#: ../src/common/stockitem.cpp:183
msgid "&Print..."
msgstr "&Yazdır..."

#: ../src/richtext/richtextctrl.cpp:339 ../src/richtext/richtextctrl.cpp:5514
#: ../src/common/stockitem.cpp:184
msgid "&Properties"
msgstr "Ö&zellikler"

#: ../src/common/cmdproc.cpp:289 ../src/common/cmdproc.cpp:309
msgid "&Redo "
msgstr "&Yinele "

#: ../src/richtext/richtextstyledlg.cpp:257
msgid "&Rename Style..."
msgstr "Biçemi &yeniden adlandır..."

#: ../src/generic/fdrepdlg.cpp:179
msgid "&Replace"
msgstr "&Değiştir"

#: ../src/richtext/richtextstyledlg.cpp:287
msgid "&Restart numbering"
msgstr "Numa&ralandırmayı yeniden başlat"

#: ../src/univ/themes/win32.cpp:3747
msgid "&Restore"
msgstr "Ge&ri yükle"

#: ../src/richtext/richtextindentspage.cpp:146
#: ../src/richtext/richtextliststylepage.cpp:335
msgid "&Right"
msgstr "&Sağ"

#: ../src/richtext/richtextindentspage.cpp:213
#: ../src/richtext/richtextborderspage.cpp:277
#: ../src/richtext/richtextborderspage.cpp:445
#: ../src/richtext/richtextliststylepage.cpp:399
#: ../src/richtext/richtextmarginspage.cpp:211
#: ../src/richtext/richtextmarginspage.cpp:325
#: ../src/richtext/richtextsizepage.cpp:602
#: ../src/richtext/richtextsizepage.cpp:609
msgid "&Right:"
msgstr "&Sağ:"

#: ../src/common/stockitem.cpp:190
msgid "&Save"
msgstr "Kay&det"

#: ../src/common/stockitem.cpp:191
msgid "&Save as"
msgstr "&Farklı kaydet"

#: ../include/wx/richmsgdlg.h:29
msgid "&See details"
msgstr "&Ayrıntılar"

#: ../src/generic/tipdlg.cpp:236
msgid "&Show tips at startup"
msgstr "İpuçları &açılışta görüntülensin"

#: ../src/univ/themes/win32.cpp:3750
msgid "&Size"
msgstr "&Boyut"

#: ../src/richtext/richtextfontpage.cpp:159
msgid "&Size:"
msgstr "&Boyut:"

#: ../src/generic/progdlgg.cpp:252
msgid "&Skip"
msgstr "A&tla"

#: ../src/richtext/richtextindentspage.cpp:242
#: ../src/richtext/richtextliststylepage.cpp:417
msgid "&Spacing (tenths of a mm)"
msgstr "&Boşluk (1/10mm)"

#: ../src/common/stockitem.cpp:197
msgid "&Spell Check"
msgstr "&Yazım Denetimi"

#: ../src/common/stockitem.cpp:198
msgid "&Stop"
msgstr "&Durdur"

#: ../src/richtext/richtextfontpage.cpp:275 ../src/common/stockitem.cpp:199
msgid "&Strikethrough"
msgstr "Ü&stü çizili"

#: ../src/generic/fontdlgg.cpp:382 ../src/richtext/richtextstylepage.cpp:106
msgid "&Style:"
msgstr "&Biçem:"

#: ../src/richtext/richtextstyledlg.cpp:198
msgid "&Styles:"
msgstr "&Biçemler:"

#: ../src/richtext/richtextsymboldlg.cpp:413
msgid "&Subset:"
msgstr "A&lt küme:"

#: ../src/richtext/richtextliststylepage.cpp:268
#: ../src/richtext/richtextbulletspage.cpp:209
msgid "&Symbol:"
msgstr "&Simge:"

#: ../src/richtext/richtextborderspage.cpp:381
#: ../src/richtext/richtextborderspage.cpp:549
msgid "&Synchronize values"
msgstr "&Değerleri eşleştir"

#: ../include/wx/richtext/richtextbuffer.h:6069
msgid "&Table"
msgstr "&Tablo"

#: ../src/common/stockitem.cpp:200
msgid "&Top"
msgstr "Üs&t"

#: ../src/richtext/richtextborderspage.cpp:311
#: ../src/richtext/richtextborderspage.cpp:479
#: ../src/richtext/richtextmarginspage.cpp:234
#: ../src/richtext/richtextmarginspage.cpp:348
#: ../src/richtext/richtextsizepage.cpp:567
#: ../src/richtext/richtextsizepage.cpp:574
msgid "&Top:"
msgstr "Üs&t:"

#: ../src/generic/fontdlgg.cpp:444 ../src/common/stockitem.cpp:202
msgid "&Underline"
msgstr "&Altı çizili"

#: ../src/richtext/richtextfontpage.cpp:234
msgid "&Underlining:"
msgstr "&Altını çizme:"

#: ../src/common/cmdproc.cpp:265
msgid "&Undo "
msgstr "&Geri Al "

#: ../src/common/stockitem.cpp:204
msgid "&Unindent"
msgstr "İçerleği &geri al"

#: ../src/common/stockitem.cpp:205
msgid "&Up"
msgstr "Y&ukarı"

#: ../src/richtext/richtextsizepage.cpp:278
msgid "&Vertical alignment:"
msgstr "&Dikey hizalama:"

#: ../src/richtext/richtextbackgroundpage.cpp:235
msgid "&Vertical offset:"
msgstr "&Dikey öteleme:"

#: ../src/generic/dbgrptg.cpp:340
msgid "&View..."
msgstr "&Görünüm..."

#: ../src/generic/fontdlgg.cpp:393
msgid "&Weight:"
msgstr "&Yoğunluk:"

#: ../src/richtext/richtextsizepage.cpp:317
#: ../src/richtext/richtextsizepage.cpp:324
msgid "&Width:"
msgstr "&Genişlik:"

#: ../src/common/stockitem.cpp:206 ../src/msw/msgdlg.cpp:441
msgid "&Yes"
msgstr "&Evet"

#: ../src/common/valtext.cpp:256
#, c-format
msgid "'%s' contains illegal characters"
msgstr "'%s' içinde geçersiz karakterler var"

#: ../src/common/valtext.cpp:254
#, c-format
msgid "'%s' doesn't consist only of valid characters"
msgstr "'%s' yalnız geçerli karakterleri içermiyor"

#: ../src/common/config.cpp:519 ../src/msw/regconf.cpp:258
#, c-format
msgid "'%s' has extra '..', ignored."
msgstr "'%s' içindeki fazladan '..' yoksayıldı."

#: ../src/common/cmdline.cpp:1113 ../src/common/cmdline.cpp:1131
#, c-format
msgid "'%s' is not a correct numeric value for option '%s'."
msgstr "'%s' '%s' seçeneği için doğru bir sayısal değer değil."

#: ../src/common/translation.cpp:1100
#, c-format
msgid "'%s' is not a valid message catalog."
msgstr "'%s' geçerli bir ileti kataloğu değil."

#: ../src/common/valtext.cpp:165
#, c-format
msgid "'%s' is not one of the valid strings"
msgstr "'%s' geçerli dizgelerden biri değil"

#: ../src/common/valtext.cpp:167
#, c-format
msgid "'%s' is one of the invalid strings"
msgstr "'%s' geçersiz dizgelerden biri"

#: ../src/common/textbuf.cpp:237
#, c-format
msgid "'%s' is probably a binary buffer."
msgstr "'%s' muhtemelen ikili ara bellek."

#: ../src/common/valtext.cpp:252
#, c-format
msgid "'%s' should be numeric."
msgstr "'%s' sayısal olmalı."

#: ../src/common/valtext.cpp:244
#, c-format
msgid "'%s' should only contain ASCII characters."
msgstr "'%s' yalnız ASCII karakterler içermeli."

#: ../src/common/valtext.cpp:246
#, c-format
msgid "'%s' should only contain alphabetic characters."
msgstr "'%s' yalnız alfabetik karakterler içermeli."

#: ../src/common/valtext.cpp:248
#, c-format
msgid "'%s' should only contain alphabetic or numeric characters."
msgstr "'%s' yalnız alfabetik ya da sayısal karakterler içermeli."

#: ../src/common/valtext.cpp:250
#, c-format
msgid "'%s' should only contain digits."
msgstr "'%s' yalnız rakamlar içermeli."

#: ../src/richtext/richtextliststylepage.cpp:229
#: ../src/richtext/richtextbulletspage.cpp:166
msgid "(*)"
msgstr "(*)"

#: ../src/html/helpwnd.cpp:963
msgid "(Help)"
msgstr "(Yardım)"

#: ../src/richtext/richtextliststylepage.cpp:481
#: ../src/richtext/richtextbulletspage.cpp:273
msgid "(None)"
msgstr "(Hiçbiri)"

#: ../src/richtext/richtextsymboldlg.cpp:504
msgid "(Normal text)"
msgstr "(Normal metin)"

#: ../src/html/helpwnd.cpp:419 ../src/html/helpwnd.cpp:1106
#: ../src/html/helpwnd.cpp:1742
msgid "(bookmarks)"
msgstr "(yer imleri)"

#: ../src/richtext/richtextindentspage.cpp:274
#: ../src/richtext/richtextindentspage.cpp:286
#: ../src/richtext/richtextindentspage.cpp:287
#: ../src/richtext/richtextindentspage.cpp:311
#: ../src/richtext/richtextindentspage.cpp:326
#: ../src/richtext/richtextformatdlg.cpp:884
#: ../src/richtext/richtextfontpage.cpp:349
#: ../src/richtext/richtextfontpage.cpp:353
#: ../src/richtext/richtextfontpage.cpp:357
#: ../src/richtext/richtextliststylepage.cpp:448
#: ../src/richtext/richtextliststylepage.cpp:460
#: ../src/richtext/richtextliststylepage.cpp:461
msgid "(none)"
msgstr "(hiçbiri)"

#: ../src/richtext/richtextliststylepage.cpp:492
#: ../src/richtext/richtextbulletspage.cpp:284
msgid "*"
msgstr "*"

#: ../src/richtext/richtextliststylepage.cpp:236
#: ../src/richtext/richtextbulletspage.cpp:173
msgid "*)"
msgstr "*)"

#: ../src/richtext/richtextliststylepage.cpp:495
#: ../src/richtext/richtextbulletspage.cpp:287
msgid "+"
msgstr "+"

#: ../src/msw/utils.cpp:1152
msgid ", 64-bit edition"
msgstr ", 64-bit sürümü"

#: ../src/richtext/richtextliststylepage.cpp:493
#: ../src/richtext/richtextbulletspage.cpp:285
msgid "-"
msgstr "-"

#: ../src/generic/filepickerg.cpp:66
msgid "..."
msgstr "..."

#: ../src/richtext/richtextindentspage.cpp:276
#: ../src/richtext/richtextliststylepage.cpp:450
msgid "1.1"
msgstr "1.1"

#: ../src/richtext/richtextindentspage.cpp:277
#: ../src/richtext/richtextliststylepage.cpp:451
msgid "1.2"
msgstr "1.2"

#: ../src/richtext/richtextindentspage.cpp:278
#: ../src/richtext/richtextliststylepage.cpp:452
msgid "1.3"
msgstr "1.3"

#: ../src/richtext/richtextindentspage.cpp:279
#: ../src/richtext/richtextliststylepage.cpp:453
msgid "1.4"
msgstr "1.4"

#: ../src/richtext/richtextindentspage.cpp:280
#: ../src/richtext/richtextliststylepage.cpp:454
msgid "1.5"
msgstr "1.5"

#: ../src/richtext/richtextindentspage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:455
msgid "1.6"
msgstr "1.6"

#: ../src/richtext/richtextindentspage.cpp:282
#: ../src/richtext/richtextliststylepage.cpp:456
msgid "1.7"
msgstr "1.7"

#: ../src/richtext/richtextindentspage.cpp:283
#: ../src/richtext/richtextliststylepage.cpp:457
msgid "1.8"
msgstr "1.8"

#: ../src/richtext/richtextindentspage.cpp:284
#: ../src/richtext/richtextliststylepage.cpp:458
msgid "1.9"
msgstr "1.9"

#: ../src/common/paper.cpp:140
msgid "10 x 11 in"
msgstr "10 x 11 inç"

#: ../src/common/paper.cpp:113
msgid "10 x 14 in"
msgstr "10 x 14 inç"

#: ../src/common/paper.cpp:114
msgid "11 x 17 in"
msgstr "11 x 17 inç"

#: ../src/common/paper.cpp:184
msgid "12 x 11 in"
msgstr "12 x 11 inç"

#: ../src/common/paper.cpp:141
msgid "15 x 11 in"
msgstr "15 x 11 inç"

#: ../src/richtext/richtextindentspage.cpp:285
#: ../src/richtext/richtextliststylepage.cpp:459
msgid "2"
msgstr "2"

#: ../src/common/paper.cpp:132
msgid "6 3/4 Envelope, 3 5/8 x 6 1/2 in"
msgstr "6 3/4 Zarf, 3 5/8 x 6 1/2 inç"

#: ../src/common/paper.cpp:139
msgid "9 x 11 in"
msgstr "9 x 11 inç"

#: ../src/html/htmprint.cpp:431
msgid ": file does not exist!"
msgstr ": dosya bulunamadı!"

#: ../src/common/fontmap.cpp:199
msgid ": unknown charset"
msgstr ": karakter kümesi bilinmiyor"

#: ../src/common/fontmap.cpp:413
msgid ": unknown encoding"
msgstr ": kodlama bilinmiyor"

#: ../src/osx/carbon/fontdlg.cpp:422 ../src/osx/carbon/fontdlg.cpp:628
#: ../src/osx/carbon/fontdlg.cpp:648
msgid "<Any Decorative>"
msgstr "<Süslü>"

#: ../src/osx/carbon/fontdlg.cpp:423 ../src/osx/carbon/fontdlg.cpp:630
#: ../src/osx/carbon/fontdlg.cpp:650
msgid "<Any Modern>"
msgstr "<Modern>"

#: ../src/osx/carbon/fontdlg.cpp:421 ../src/osx/carbon/fontdlg.cpp:626
#: ../src/osx/carbon/fontdlg.cpp:646
msgid "<Any Roman>"
msgstr "<Roman>"

#: ../src/osx/carbon/fontdlg.cpp:424 ../src/osx/carbon/fontdlg.cpp:632
#: ../src/osx/carbon/fontdlg.cpp:652
msgid "<Any Script>"
msgstr "<Betik>"

#: ../src/osx/carbon/fontdlg.cpp:425 ../src/osx/carbon/fontdlg.cpp:637
#: ../src/osx/carbon/fontdlg.cpp:656
msgid "<Any Swiss>"
msgstr "<İsveç>"

#: ../src/osx/carbon/fontdlg.cpp:426 ../src/osx/carbon/fontdlg.cpp:634
#: ../src/osx/carbon/fontdlg.cpp:654
msgid "<Any Teletype>"
msgstr "<Teletype>"

#: ../src/osx/carbon/fontdlg.cpp:420
msgid "<Any>"
msgstr "<Herhangi>"

#: ../src/generic/filectrlg.cpp:250 ../src/generic/filectrlg.cpp:273
msgid "<DIR>"
msgstr "<DIR>"

#: ../src/generic/filectrlg.cpp:254 ../src/generic/filectrlg.cpp:277
msgid "<DRIVE>"
msgstr "<DRIVE>"

#: ../src/generic/filectrlg.cpp:252 ../src/generic/filectrlg.cpp:275
msgid "<LINK>"
msgstr "<LINK>"

#: ../src/html/helpwnd.cpp:1266
msgid "<b><i>Bold italic face.</i></b><br>"
msgstr "<b><i>Koyu yatık şekil.</i></b><br>"

#: ../src/html/helpwnd.cpp:1270
msgid "<b><i>bold italic <u>underlined</u></i></b><br>"
msgstr "<b><i>koyu yatık <u>altı çizili</u></i></b><br>"

#: ../src/html/helpwnd.cpp:1265
msgid "<b>Bold face.</b> "
msgstr "<b>Koyu şekil.</b> "

#: ../src/html/helpwnd.cpp:1264
msgid "<i>Italic face.</i> "
msgstr "<i>Yatık şekil.</i> "

#: ../src/richtext/richtextliststylepage.cpp:494
#: ../src/richtext/richtextbulletspage.cpp:286
msgid ">"
msgstr ">"

#: ../src/generic/dbgrptg.cpp:318
msgid "A debug report has been generated in the directory\n"
msgstr "Klasörde bir hata ayıklama raporu oluşturuldu\n"

#: ../src/common/debugrpt.cpp:573
msgid "A debug report has been generated. It can be found in"
msgstr "Hata ayıklama raporu oluşturuldu. Şurada bulabilirsiniz"

#: ../src/common/xtixml.cpp:418
msgid "A non empty collection must consist of 'element' nodes"
msgstr "Boş olmayan bir yığın 'element' düğümlerinden oluşmalıdır"

#: ../src/richtext/richtextliststylepage.cpp:304
#: ../src/richtext/richtextliststylepage.cpp:306
#: ../src/richtext/richtextbulletspage.cpp:244
#: ../src/richtext/richtextbulletspage.cpp:246
msgid "A standard bullet name."
msgstr "Standart bir madde imi adı."

#: ../src/common/paper.cpp:217
msgid "A0 sheet, 841 x 1189 mm"
msgstr "A0 sayfa, 841 x 1189 mm"

#: ../src/common/paper.cpp:218
msgid "A1 sheet, 594 x 841 mm"
msgstr "A1 sayfa, 594 x 841 mm"

#: ../src/common/paper.cpp:159
msgid "A2 420 x 594 mm"
msgstr "A2 420 x 594 mm"

#: ../src/common/paper.cpp:156
msgid "A3 Extra 322 x 445 mm"
msgstr "A3 Ekstra 322 x 445 mm"

#: ../src/common/paper.cpp:161
msgid "A3 Extra Transverse 322 x 445 mm"
msgstr "A3 Ekstra Enine 322 x 445 mm"

#: ../src/common/paper.cpp:170
msgid "A3 Rotated 420 x 297 mm"
msgstr "A3 Çevrilmiş 420 x 297 mm"

#: ../src/common/paper.cpp:160
msgid "A3 Transverse 297 x 420 mm"
msgstr "A3 Enine 297 x 420 mm"

#: ../src/common/paper.cpp:106
msgid "A3 sheet, 297 x 420 mm"
msgstr "A3 sayfa, 297 x 420 mm"

#: ../src/common/paper.cpp:146
msgid "A4 Extra 9.27 x 12.69 in"
msgstr "A4 Ekstra 9.27 x 12.69 inç"

#: ../src/common/paper.cpp:153
msgid "A4 Plus 210 x 330 mm"
msgstr "A4 Artı 210 x 330 mm"

#: ../src/common/paper.cpp:171
msgid "A4 Rotated 297 x 210 mm"
msgstr "A4 Çevrilmiş 297 x 210 mm"

#: ../src/common/paper.cpp:148
msgid "A4 Transverse 210 x 297 mm"
msgstr "A4 Enine 210 x 297 mm"

#: ../src/common/paper.cpp:97
msgid "A4 sheet, 210 x 297 mm"
msgstr "A4 sayfa, 210 x 297 mm"

#: ../src/common/paper.cpp:107
msgid "A4 small sheet, 210 x 297 mm"
msgstr "A4 küçük sayfa, 210 x 297 mm"

#: ../src/common/paper.cpp:157
msgid "A5 Extra 174 x 235 mm"
msgstr "A5 Ekstra 174 x 235 mm"

#: ../src/common/paper.cpp:172
msgid "A5 Rotated 210 x 148 mm"
msgstr "A5 Çevrilmiş 210 x 148 mm"

#: ../src/common/paper.cpp:154
msgid "A5 Transverse 148 x 210 mm"
msgstr "A5 Enine 148 x 210 mm"

#: ../src/common/paper.cpp:108
msgid "A5 sheet, 148 x 210 mm"
msgstr "A5 sayfa, 148 x 210 mm"

#: ../src/common/paper.cpp:164
msgid "A6 105 x 148 mm"
msgstr "A6 105 x 148 mm"

#: ../src/common/paper.cpp:177
msgid "A6 Rotated 148 x 105 mm"
msgstr "A6 Çevrilmiş 148 x 105 mm"

#: ../src/generic/fontdlgg.cpp:83 ../src/richtext/richtextformatdlg.cpp:529
#: ../src/osx/carbon/fontdlg.cpp:153
msgid "ABCDEFGabcdefg12345"
msgstr "ABCDEFGabcdefg12345"

#: ../src/richtext/richtextsymboldlg.cpp:458 ../src/common/ftp.cpp:403
msgid "ASCII"
msgstr "ASCII"

#: ../src/common/stockitem.cpp:139
msgid "About"
msgstr "Hakkında"

#: ../src/osx/menu_osx.cpp:560
msgid "About..."
msgstr "Hakkında..."

#: ../src/richtext/richtextsizepage.cpp:520
msgid "Absolute"
msgstr "Mutlak"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:873
msgid "ActiveBorder"
msgstr "EtkinKenarlık"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:874
msgid "ActiveCaption"
msgstr "EtkinBaşlık"

#: ../src/common/stockitem.cpp:207
msgid "Actual Size"
msgstr "Geçerli Boyut"

#: ../src/richtext/richtextbuffer.cpp:11455
msgid "Add Column"
msgstr "Sütun Ekle"

#: ../src/richtext/richtextbuffer.cpp:11392
msgid "Add Row"
msgstr "Satır Ekle"

#: ../src/html/helpwnd.cpp:432
msgid "Add current page to bookmarks"
msgstr "Geçerli sayfayı yer imlerine ekle"

#: ../src/generic/colrdlgg.cpp:366
msgid "Add to custom colours"
msgstr "Özel renklere ekle"

#: ../include/wx/xtiprop.h:255
msgid "AddToPropertyCollection called on a generic accessor"
msgstr "AddToPropertyCollection işlevi, genel bir erişici üzerinden çağrıldı"

#: ../include/wx/xtiprop.h:193
msgid "AddToPropertyCollection called w/o valid adder"
msgstr "AddToPropertyCollection işlevi, geçerli bir ekleyici olmadançağrıldı"

#: ../src/html/helpctrl.cpp:159
#, c-format
msgid "Adding book %s"
msgstr "%s kitabı ekleniyor"

#: ../src/richtext/richtextliststylepage.cpp:435
msgid "After a paragraph:"
msgstr "Paragraftan sonra:"

#: ../src/common/stockitem.cpp:172
msgid "Align Left"
msgstr "Sola Hizala"

#: ../src/common/stockitem.cpp:173
msgid "Align Right"
msgstr "Sağa Hizala"

#: ../src/richtext/richtextsizepage.cpp:266
msgid "Alignment"
msgstr "Hizalama"

#: ../src/generic/filectrlg.cpp:1197 ../src/common/fldlgcmn.cpp:107
#, c-format
msgid "All files (%s)|%s"
msgstr "Tüm dosyalar (%s)|%s"

#: ../include/wx/defs.h:2886
msgid "All files (*)|*"
msgstr "Tüm dosyalar (*)|*"

#: ../include/wx/defs.h:2883
msgid "All files (*.*)|*.*"
msgstr "Tüm dosyalar (*.*)|*.*"

#: ../src/richtext/richtextstyles.cpp:1061
msgid "All styles"
msgstr "Tüm biçemler"

#: ../src/propgrid/manager.cpp:1528
msgid "Alphabetic Mode"
msgstr "Alfabetik Kip"

#: ../src/common/xtistrm.cpp:425
msgid "Already Registered Object passed to SetObjectClassInfo"
msgstr "SetObjectClassInfo işlevi zaten kaydedilmiş bir nesne ile çağrıldı"

#: ../src/unix/dialup.cpp:353
msgid "Already dialling ISP."
msgstr "ISP zaten aranıyor."

#: ../src/common/accelcmn.cpp:331 ../src/univ/themes/win32.cpp:3756
msgid "Alt+"
msgstr "Alt+"

#: ../src/richtext/richtextborderspage.cpp:577
#: ../src/richtext/richtextborderspage.cpp:579
msgid "An optional corner radius for adding rounded corners."
msgstr "Yuvarlak köşeler eklemek için isteğe bağlı köşe yarıçapı."

#: ../src/common/debugrpt.cpp:576
msgid "And includes the following files:\n"
msgstr "Ve aşağıdaki dosyaları içeriyor:\n"

#: ../src/generic/animateg.cpp:162
#, c-format
msgid "Animation file is not of type %ld."
msgstr "Canlandırma dosyası %ld türünde değil."

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:872
msgid "AppWorkspace"
msgstr "UygulamaAlanı"

#: ../src/generic/logg.cpp:1014
#, c-format
msgid "Append log to file '%s' (choosing [No] will overwrite it)?"
msgstr "'%s' günlük dosyasına eklensin ([Hayır] seçilirse üzerine yazılacak)."

#: ../src/osx/menu_osx.cpp:577 ../src/osx/menu_osx.cpp:585
msgid "Application"
msgstr "Uygulama"

#: ../src/propgrid/advprops.cpp:1609
msgid "Aqua"
msgstr "Deniz Mavisi"

#: ../src/richtext/richtextliststylepage.cpp:482
#: ../src/richtext/richtextbulletspage.cpp:274
msgid "Arabic"
msgstr "Arapça"

#: ../src/common/fmapbase.cpp:153
msgid "Arabic (ISO-8859-6)"
msgstr "Arapça (ISO-8859-6)"

#: ../src/msw/ole/automtn.cpp:672
#, c-format
msgid "Argument %u not found."
msgstr "%u argümanı bulunamadı."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1753
msgid "Arrow"
msgstr "Ok"

#: ../src/generic/aboutdlgg.cpp:184
msgid "Artists"
msgstr "Sanatçılar"

#: ../src/common/stockitem.cpp:195
msgid "Ascending"
msgstr "Artan"

#: ../src/generic/filectrlg.cpp:433
msgid "Attributes"
msgstr "Öznitelikler"

#: ../src/richtext/richtextliststylepage.cpp:294
#: ../src/richtext/richtextbulletspage.cpp:232
#: ../src/richtext/richtextbulletspage.cpp:234
msgid "Available fonts."
msgstr "Kullanılabilecek yazı türleri."

#: ../src/common/paper.cpp:137
msgid "B4 (ISO) 250 x 353 mm"
msgstr "B4 (ISO) 250 x 353 mm"

#: ../src/common/paper.cpp:173
msgid "B4 (JIS) Rotated 364 x 257 mm"
msgstr "B4 (JIS) Çevrilmiş 364 x 257 mm"

#: ../src/common/paper.cpp:127
msgid "B4 Envelope, 250 x 353 mm"
msgstr "B4 Zarf, 250 x 353 mm"

#: ../src/common/paper.cpp:109
msgid "B4 sheet, 250 x 354 mm"
msgstr "B4 sayfa, 250 x 354 mm"

#: ../src/common/paper.cpp:158
msgid "B5 (ISO) Extra 201 x 276 mm"
msgstr "B5 (ISO) Ekstra 201 x 276 mm"

#: ../src/common/paper.cpp:174
msgid "B5 (JIS) Rotated 257 x 182 mm"
msgstr "B5 (JIS) Çevrilmiş 257 x 182 mm"

#: ../src/common/paper.cpp:155
msgid "B5 (JIS) Transverse 182 x 257 mm"
msgstr "B5 (JIS) Enine 182 x 257 mm"

#: ../src/common/paper.cpp:128
msgid "B5 Envelope, 176 x 250 mm"
msgstr "B5 Zarf, 176 x 250 mm"

#: ../src/common/paper.cpp:110
msgid "B5 sheet, 182 x 257 millimeter"
msgstr "B5 sayfa, 182 x 257 mm"

#: ../src/common/paper.cpp:182
msgid "B6 (JIS) 128 x 182 mm"
msgstr "B6 (JIS) 128 x 182 mm"

#: ../src/common/paper.cpp:183
msgid "B6 (JIS) Rotated 182 x 128 mm"
msgstr "B6 (JIS) Çevrilmiş 182 x 128 mm"

#: ../src/common/paper.cpp:129
msgid "B6 Envelope, 176 x 125 mm"
msgstr "B6 Zarf, 176 x 125 mm"

#: ../src/common/imagbmp.cpp:531 ../src/common/imagbmp.cpp:561
#: ../src/common/imagbmp.cpp:576
msgid "BMP: Couldn't allocate memory."
msgstr "BMP: bellek ayrılamadı."

#: ../src/common/imagbmp.cpp:100
msgid "BMP: Couldn't save invalid image."
msgstr "BMP: Geçersiz görüntü kaydedilemedi."

#: ../src/common/imagbmp.cpp:356
msgid "BMP: Couldn't write RGB color map."
msgstr "BMP: RGB renk haritası yazılamadı."

#: ../src/common/imagbmp.cpp:490
msgid "BMP: Couldn't write data."
msgstr "BMP: Veri yazılamadı."

#: ../src/common/imagbmp.cpp:246
msgid "BMP: Couldn't write the file (Bitmap) header."
msgstr "BMP: Dosya (Bitmap) başlık bilgisi yazılamadı."

#: ../src/common/imagbmp.cpp:269
msgid "BMP: Couldn't write the file (BitmapInfo) header."
msgstr "BMP: Dosya (BitmapInfo) başlık bilgisi yazılamadı."

#: ../src/common/imagbmp.cpp:140
msgid "BMP: wxImage doesn't have own wxPalette."
msgstr "BMP: wxImage için wxPalette yok."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:142 ../src/common/accelcmn.cpp:52
msgid "Back"
msgstr "Geri"

#: ../src/richtext/richtextbackgroundpage.cpp:148
#: ../src/richtext/richtextformatdlg.cpp:384
msgid "Background"
msgstr "Art alan"

#: ../src/richtext/richtextbackgroundpage.cpp:160
msgid "Background &colour:"
msgstr "Art alan &rengi:"

#: ../src/osx/carbon/fontdlg.cpp:220
msgid "Background colour"
msgstr "Art alan rengi"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:52
msgid "Backspace"
msgstr "Geri silme"

#: ../src/common/fmapbase.cpp:160
msgid "Baltic (ISO-8859-13)"
msgstr "Baltık (ISO-8859-13)"

#: ../src/common/fmapbase.cpp:151
msgid "Baltic (old) (ISO-8859-4)"
msgstr "Baltık (eski) (ISO-8859-4)"

#: ../src/richtext/richtextliststylepage.cpp:426
msgid "Before a paragraph:"
msgstr "Paragraftan önce:"

#: ../src/richtext/richtextliststylepage.cpp:489
#: ../src/richtext/richtextbulletspage.cpp:281
msgid "Bitmap"
msgstr "Bitmap"

#: ../src/propgrid/advprops.cpp:1594
msgid "Black"
msgstr "Siyah"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1755
msgid "Blank"
msgstr "Boş"

#: ../src/propgrid/advprops.cpp:1603
msgid "Blue"
msgstr "Mavi"

#: ../src/generic/colrdlgg.cpp:345
msgid "Blue:"
msgstr "Mavi:"

#: ../src/generic/fontdlgg.cpp:333 ../src/richtext/richtextfontpage.cpp:355
#: ../src/osx/carbon/fontdlg.cpp:354 ../src/common/stockitem.cpp:143
msgid "Bold"
msgstr "Kalın"

#: ../src/richtext/richtextborderspage.cpp:230
#: ../src/richtext/richtextborderspage.cpp:388
msgid "Border"
msgstr "Kenarlık"

#: ../src/richtext/richtextformatdlg.cpp:379
msgid "Borders"
msgstr "Kenarlıklar"

#: ../src/generic/prntdlgg.cpp:893
msgid "Bottom margin (mm):"
msgstr "Alt kenar boşluğu (mm):"

#: ../src/richtext/richtextbuffer.cpp:9383
msgid "Box Properties"
msgstr "Kutu Özellikleri"

#: ../src/richtext/richtextstyles.cpp:1065
msgid "Box styles"
msgstr "Kutu biçemleri"

#: ../src/propgrid/advprops.cpp:1602
msgid "Brown"
msgstr "Kahverengi"

#: ../src/richtext/richtextliststylepage.cpp:245
#: ../src/richtext/richtextbulletspage.cpp:182
msgid "Bullet &Alignment:"
msgstr "Madde İmi &Hizalaması:"

#: ../src/richtext/richtextliststylepage.cpp:309
msgid "Bullet style"
msgstr "Madde imi biçemi"

#: ../src/richtext/richtextformatdlg.cpp:359
msgid "Bullets"
msgstr "Madde imleri"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1756
msgid "Bullseye"
msgstr "Öküz gözü"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:875
msgid "ButtonFace"
msgstr "DüğmeÖnyüzü"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:876
msgid "ButtonHighlight"
msgstr "DüğmeVurgusu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:877
msgid "ButtonShadow"
msgstr "DüğmeGölgesi"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:878
msgid "ButtonText"
msgstr "DüğmeMetni"

#: ../src/common/paper.cpp:98
msgid "C sheet, 17 x 22 in"
msgstr "C sayfa, 17 x 22 inç"

#: ../src/generic/logg.cpp:514
msgid "C&lear"
msgstr "T&emizle"

#: ../src/generic/fontdlgg.cpp:406
msgid "C&olour:"
msgstr "&Renk:"

#: ../src/common/paper.cpp:123
msgid "C3 Envelope, 324 x 458 mm"
msgstr "C3 Zarf, 324 x 458 mm"

#: ../src/common/paper.cpp:124
msgid "C4 Envelope, 229 x 324 mm"
msgstr "C4 Zarf, 229 x 324 mm"

#: ../src/common/paper.cpp:122
msgid "C5 Envelope, 162 x 229 mm"
msgstr "C5 Zarf, 162 x 229 mm"

#: ../src/common/paper.cpp:125
msgid "C6 Envelope, 114 x 162 mm"
msgstr "C6 Zarf, 114 x 162 mm"

#: ../src/common/paper.cpp:126
msgid "C65 Envelope, 114 x 229 mm"
msgstr "C65 Zarf, 114 x 229 mm"

#: ../src/common/stockitem.cpp:146
msgid "CD-Rom"
msgstr "CD-Rom"

#: ../src/html/chm.cpp:815 ../src/html/chm.cpp:874
msgid "CHM handler currently supports only local files!"
msgstr "CHM işleyici şimdilik yalnız yerel dosyaları destekliyor!"

#: ../src/richtext/richtextfontpage.cpp:282
msgid "Ca&pitals"
msgstr "&Büyük harfler"

#: ../src/common/cmdproc.cpp:267
msgid "Can't &Undo "
msgstr "&Geri Alınamıyor "

#: ../src/common/image.cpp:2824
msgid "Can't automatically determine the image format for non-seekable input."
msgstr "Aranamayan giriş için görsel biçimi kendiliğinden belirlenemiyor."

#: ../src/msw/registry.cpp:506
#, c-format
msgid "Can't close registry key '%s'"
msgstr "'%s' kayıt anahtarı kapatılamadı"

#: ../src/msw/registry.cpp:584
#, c-format
msgid "Can't copy values of unsupported type %d."
msgstr "Desteklenmeyen %d türünün değerleri kopyalanamadı."

#: ../src/msw/registry.cpp:487
#, c-format
msgid "Can't create registry key '%s'"
msgstr "'%s' kayıt anahtarı oluşturulamadı"

#: ../src/msw/thread.cpp:665
msgid "Can't create thread"
msgstr "İş parçacığı oluşturulamadı"

#: ../src/msw/window.cpp:3691
#, c-format
msgid "Can't create window of class %s"
msgstr "%s sınıfının penceresi oluşturulamadı"

#: ../src/msw/registry.cpp:777
#, c-format
msgid "Can't delete key '%s'"
msgstr "'%s' anahtarı silinemedi"

#: ../src/msw/iniconf.cpp:458
#, c-format
msgid "Can't delete the INI file '%s'"
msgstr "'%s' INI dosyası silinemedi"

#: ../src/msw/registry.cpp:805
#, c-format
msgid "Can't delete value '%s' from key '%s'"
msgstr "'%s' değeri '%s' anahtarından silinemiyor"

#: ../src/msw/registry.cpp:1171
#, c-format
msgid "Can't enumerate subkeys of key '%s'"
msgstr "'%s' anahtarının alt anahtarları sayılamadı"

#: ../src/msw/registry.cpp:1132
#, c-format
msgid "Can't enumerate values of key '%s'"
msgstr "'%s' anahtarının değerleri sayılamadı"

#: ../src/msw/registry.cpp:1389
#, c-format
msgid "Can't export value of unsupported type %d."
msgstr "Desteklenmeyen %d türünün değeri verilemedi."

#: ../src/common/ffile.cpp:254
#, c-format
msgid "Can't find current position in file '%s'"
msgstr "'%s' dosyasındaki geçerli konum bulunamadı"

#: ../src/msw/registry.cpp:418
#, c-format
msgid "Can't get info about registry key '%s'"
msgstr "'%s' kayıt anahtarı hakkında bilgi alınamadı"

#: ../src/common/zstream.cpp:346
msgid "Can't initialize zlib deflate stream."
msgstr "Zlib sıkıştırma akışı başlatılamadı."

#: ../src/common/zstream.cpp:185
msgid "Can't initialize zlib inflate stream."
msgstr "Zlib ayıklama akışı başlatılamadı."

#: ../src/msw/fswatcher.cpp:476
#, c-format
msgid "Can't monitor non-existent directory \"%s\" for changes."
msgstr "\"%s\" klasörü bulunamadığından değişiklikleri izlenemiyor."

#: ../src/msw/registry.cpp:454
#, c-format
msgid "Can't open registry key '%s'"
msgstr "'%s' kayıt anahtarı açılamadı"

#: ../src/common/zstream.cpp:252
#, c-format
msgid "Can't read from inflate stream: %s"
msgstr "Ayıklama akışı okunamadı: %s"

#: ../src/common/zstream.cpp:244
msgid "Can't read inflate stream: unexpected EOF in underlying stream."
msgstr "Ayıklama akışı okunamadı: alt akışıta beklenmeyen dosya sonu."

#: ../src/msw/registry.cpp:1064
#, c-format
msgid "Can't read value of '%s'"
msgstr "'%s' değeri okunamadı"

#: ../src/msw/registry.cpp:878 ../src/msw/registry.cpp:910
#: ../src/msw/registry.cpp:975
#, c-format
msgid "Can't read value of key '%s'"
msgstr "'%s' anahtarının değeri okunamadı"

#: ../src/common/image.cpp:2620
#, c-format
msgid "Can't save image to file '%s': unknown extension."
msgstr "Görüntü '%s' dosyasına kaydedilemedi: bilinmeyen uzantı."

#: ../src/generic/logg.cpp:573 ../src/generic/logg.cpp:976
msgid "Can't save log contents to file."
msgstr "Günlük içeriği dosyaya kaydedilemedi."

#: ../src/msw/thread.cpp:629
msgid "Can't set thread priority"
msgstr "İş parçacığının önceliği ayarlanamadı"

#: ../src/msw/registry.cpp:896 ../src/msw/registry.cpp:938
#: ../src/msw/registry.cpp:1081
#, c-format
msgid "Can't set value of '%s'"
msgstr "'%s' değeri değiştirilemedi"

#: ../src/unix/utilsunx.cpp:351
msgid "Can't write to child process's stdin"
msgstr "Alt işlem stdin yazılamadı"

#: ../src/common/zstream.cpp:427
#, c-format
msgid "Can't write to deflate stream: %s"
msgstr "Sıkıştırma akışına yazılamadı: %s"

#: ../src/common/filefn.cpp:1261
#, c-format
msgid "Cannot enumerate files '%s'"
msgstr "'%s' dosyaları sayılamadı"

#: ../src/msw/dir.cpp:263
#, c-format
msgid "Cannot enumerate files in directory '%s'"
msgstr "'%s' klasöründeki dosyalar sayılamadı"

#: ../src/msw/dialup.cpp:523
#, c-format
msgid "Cannot find active dialup connection: %s"
msgstr "Etkin çevirmeli bağlantı bulunamadı: %s"

#: ../src/msw/dialup.cpp:827
msgid "Cannot find the location of address book file"
msgstr "Adres defteri dosyasının yeri bulunamadı"

#: ../src/msw/ole/automtn.cpp:562
#, c-format
msgid "Cannot get an active instance of \"%s\""
msgstr "Çalışan bir \"%s\" kopyası bulunamadı"

#: ../src/unix/threadpsx.cpp:1035
#, c-format
msgid "Cannot get priority range for scheduling policy %d."
msgstr "Zamanlama ilkesi %d için öncelik aralığı alınamadı."

#: ../src/unix/utilsunx.cpp:987
msgid "Cannot get the hostname"
msgstr "Sunucu adı alınamadı"

#: ../src/unix/utilsunx.cpp:1023
msgid "Cannot get the official hostname"
msgstr "Resmi sunucu adı alınamadı"

#: ../src/msw/dialup.cpp:928
msgid "Cannot hang up - no active dialup connection."
msgstr "Kapatılamadı - etkin çevirmeli bağlantı yok."

#: ../include/wx/msw/ole/oleutils.h:51
msgid "Cannot initialize OLE"
msgstr "OLE başlatılamadı"

#: ../src/common/socket.cpp:853
msgid "Cannot initialize sockets"
msgstr "Soketler başlatılamadı"

#: ../src/msw/volume.cpp:619
#, c-format
msgid "Cannot load icon from '%s'."
msgstr "'%s' içinden simge yüklenemedi."

#: ../src/xrc/xmlres.cpp:360
#, c-format
msgid "Cannot load resources from '%s'."
msgstr "Kaynaklar '%s' dosyasından yüklenemedi."

#: ../src/xrc/xmlres.cpp:742
#, c-format
msgid "Cannot load resources from file '%s'."
msgstr "Kaynaklar '%s' dosyasından yüklenemedi."

#: ../src/html/htmlfilt.cpp:137
#, c-format
msgid "Cannot open HTML document: %s"
msgstr "%s HTML belgesi açılamadı"

#: ../src/html/helpdata.cpp:667
#, c-format
msgid "Cannot open HTML help book: %s"
msgstr "%s HTML yardım kitabı açılamadı"

#: ../src/html/helpdata.cpp:299
#, c-format
msgid "Cannot open contents file: %s"
msgstr "%s içerik dosyası açılamadı"

#: ../src/generic/dcpsg.cpp:1667
msgid "Cannot open file for PostScript printing!"
msgstr "Dosya PostScript yazdırma için açılamadı!"

#: ../src/html/helpdata.cpp:313
#, c-format
msgid "Cannot open index file: %s"
msgstr "%s dizin dosyası açılamadı"

#: ../src/xrc/xmlres.cpp:724
#, c-format
msgid "Cannot open resources file '%s'."
msgstr "'%s' kaynak dosyası açılamadı."

#: ../src/html/helpwnd.cpp:1534
msgid "Cannot print empty page."
msgstr "Boş sayfa basılamaz."

#: ../src/msw/volume.cpp:507
#, c-format
msgid "Cannot read typename from '%s'!"
msgstr "'%s' içinden tür adı okunamadı!"

#: ../src/msw/thread.cpp:888
#, c-format
msgid "Cannot resume thread %lx"
msgstr "%lx iş parçacığı sürdürülemiyor"

#: ../src/unix/threadpsx.cpp:1016
msgid "Cannot retrieve thread scheduling policy."
msgstr "İş parçacığı zamanlama ilkesi alınamadı."

#: ../src/common/intl.cpp:558
#, c-format
msgid "Cannot set locale to language \"%s\"."
msgstr "Yerel ayarlar \"%s\" diline çevrilemedi."

#: ../src/unix/threadpsx.cpp:831 ../src/msw/thread.cpp:546
msgid "Cannot start thread: error writing TLS."
msgstr "İş parçacığı başlatılamadı: TLS yazma hatası."

#: ../src/msw/thread.cpp:872
#, c-format
msgid "Cannot suspend thread %lx"
msgstr "%lx iş parçacığı beklemeye alınamadı"

#: ../src/msw/thread.cpp:794
msgid "Cannot wait for thread termination"
msgstr "İş parçacığının sonlanması beklenemiyor"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:75
msgid "Capital"
msgstr "Büyük"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:879
msgid "CaptionText"
msgstr "BaşlıkMetni"

#: ../src/html/helpwnd.cpp:533
msgid "Case sensitive"
msgstr "Büyük küçük harfe duyarlı"

#: ../src/propgrid/manager.cpp:1509
msgid "Categorized Mode"
msgstr "Kategorize Kip"

#: ../src/richtext/richtextbuffer.cpp:9968
msgid "Cell Properties"
msgstr "Hücre Özellikleri"

#: ../src/common/fmapbase.cpp:161
msgid "Celtic (ISO-8859-14)"
msgstr "Keltçe (ISO-8859-14)"

#: ../src/richtext/richtextindentspage.cpp:160
#: ../src/richtext/richtextliststylepage.cpp:349
msgid "Cen&tred"
msgstr "Or&talanmış"

#: ../src/common/stockitem.cpp:170
msgid "Centered"
msgstr "Ortalanmış"

#: ../src/common/fmapbase.cpp:149
msgid "Central European (ISO-8859-2)"
msgstr "Orta Avrupa (ISO-8859-2)"

#: ../src/richtext/richtextliststylepage.cpp:250
#: ../src/richtext/richtextbulletspage.cpp:187
msgid "Centre"
msgstr "Orta"

#: ../src/richtext/richtextindentspage.cpp:162
#: ../src/richtext/richtextindentspage.cpp:164
#: ../src/richtext/richtextliststylepage.cpp:351
#: ../src/richtext/richtextliststylepage.cpp:353
msgid "Centre text."
msgstr "Metni ortala."

#: ../src/richtext/richtextsizepage.cpp:287
msgid "Centred"
msgstr "Ortalanmış"

#: ../src/richtext/richtextliststylepage.cpp:280
#: ../src/richtext/richtextbulletspage.cpp:219
msgid "Ch&oose..."
msgstr "S&eçin..."

#: ../src/richtext/richtextbuffer.cpp:4354
msgid "Change List Style"
msgstr "Liste Biçemini Değiştir"

#: ../src/richtext/richtextbuffer.cpp:3709
msgid "Change Object Style"
msgstr "Nesne Biçemini Değiştir"

#: ../src/richtext/richtextbuffer.cpp:3982
#: ../src/richtext/richtextbuffer.cpp:8129
msgid "Change Properties"
msgstr "Özellikleri Değiştir"

#: ../src/richtext/richtextbuffer.cpp:3526
msgid "Change Style"
msgstr "Biçemi Değiştir"

#: ../src/common/fileconf.cpp:341
#, c-format
msgid "Changes won't be saved to avoid overwriting the existing file \"%s\""
msgstr ""
"Varolan \"%s\" dosyasının üzerine yazılmasını önlemek için değişiklikler "
"kaydedilmeyecek"

#: ../src/gtk/filepicker.cpp:190 ../src/gtk/filedlg.cpp:87
#, c-format
msgid "Changing current directory to \"%s\" failed"
msgstr "Geçerli klasör \"%s\" olarak değiştirilemedi"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1757
msgid "Character"
msgstr "Karakter"

#: ../src/richtext/richtextstyles.cpp:1063
msgid "Character styles"
msgstr "Karakter biçemleri"

#: ../src/richtext/richtextliststylepage.cpp:224
#: ../src/richtext/richtextliststylepage.cpp:226
#: ../src/richtext/richtextbulletspage.cpp:161
#: ../src/richtext/richtextbulletspage.cpp:163
msgid "Check to add a period after the bullet."
msgstr "Madde iminin ardına nokta eklenmesi için işaretleyin."

#: ../src/richtext/richtextliststylepage.cpp:238
#: ../src/richtext/richtextliststylepage.cpp:240
#: ../src/richtext/richtextbulletspage.cpp:175
#: ../src/richtext/richtextbulletspage.cpp:177
msgid "Check to add a right parenthesis."
msgstr "Sağa bir parantez eklemek için işaretleyin."

#: ../src/richtext/richtextborderspage.cpp:383
#: ../src/richtext/richtextborderspage.cpp:385
#: ../src/richtext/richtextborderspage.cpp:551
#: ../src/richtext/richtextborderspage.cpp:553
msgid "Check to edit all borders simultaneously."
msgstr "Tüm kenarlıklara aynı anda uygulanması için işaretleyin."

#: ../src/richtext/richtextliststylepage.cpp:231
#: ../src/richtext/richtextliststylepage.cpp:233
#: ../src/richtext/richtextbulletspage.cpp:168
#: ../src/richtext/richtextbulletspage.cpp:170
msgid "Check to enclose the bullet in parentheses."
msgstr "Madde imini parantez içine almak için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:315
#: ../src/richtext/richtextfontpage.cpp:317
msgid "Check to indicate right-to-left text layout."
msgstr "Sağdan sola yazı için işaretleyin."

#: ../src/osx/carbon/fontdlg.cpp:356 ../src/osx/carbon/fontdlg.cpp:358
msgid "Check to make the font bold."
msgstr "Koyu yazı türü için işaretleyin."

#: ../src/osx/carbon/fontdlg.cpp:363 ../src/osx/carbon/fontdlg.cpp:365
msgid "Check to make the font italic."
msgstr "Yatık yazı türü için işaretleyin."

#: ../src/osx/carbon/fontdlg.cpp:372 ../src/osx/carbon/fontdlg.cpp:374
msgid "Check to make the font underlined."
msgstr "Altı çizili yazı türü için işaretleyin."

#: ../src/richtext/richtextstyledlg.cpp:289
#: ../src/richtext/richtextstyledlg.cpp:291
msgid "Check to restart numbering."
msgstr "Yeniden numaralandırmak için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:277
#: ../src/richtext/richtextfontpage.cpp:279
msgid "Check to show a line through the text."
msgstr "Metnin üzerini çizmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:284
#: ../src/richtext/richtextfontpage.cpp:286
msgid "Check to show the text in capitals."
msgstr "Metni büyük harfe dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:291
#: ../src/richtext/richtextfontpage.cpp:293
msgid "Check to show the text in small capitals."
msgstr "Metni küçük harfe dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:305
#: ../src/richtext/richtextfontpage.cpp:307
msgid "Check to show the text in subscript."
msgstr "Metni alt karaktere dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:298
#: ../src/richtext/richtextfontpage.cpp:300
msgid "Check to show the text in superscript."
msgstr "Metni üst karaktere dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:322
#: ../src/richtext/richtextfontpage.cpp:324
msgid "Check to suppress hyphenation."
msgstr "Hecelemeyi engellemek için işaretleyin."

#: ../src/msw/dialup.cpp:763
msgid "Choose ISP to dial"
msgstr "Aranacak servis sağlayıcıyı seçin"

#: ../src/propgrid/props.cpp:1922
msgid "Choose a directory:"
msgstr "Bir klasör seçin:"

#: ../src/propgrid/props.cpp:1975
msgid "Choose a file"
msgstr "Bir dosya seçin"

#: ../src/generic/colrdlgg.cpp:158 ../src/gtk/colordlg.cpp:54
msgid "Choose colour"
msgstr "Renk seçin"

#: ../src/generic/fontpickerg.cpp:50 ../src/gtk/fontdlg.cpp:77
#: ../src/gtk1/fontdlg.cpp:125
msgid "Choose font"
msgstr "Yazı türü seçin"

#: ../src/common/module.cpp:74
#, c-format
msgid "Circular dependency involving module \"%s\" detected."
msgstr "\"%s\" modülü ile döngüsel bağlılık algılandı."

#: ../src/aui/tabmdi.cpp:108 ../src/generic/mdig.cpp:97
msgid "Cl&ose"
msgstr "Kapa&t"

#: ../src/msw/ole/automtn.cpp:684
msgid "Class not registered."
msgstr "Sınıf kaydedilmemiş."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:147 ../src/common/accelcmn.cpp:72
msgid "Clear"
msgstr "Temizle"

#: ../src/generic/logg.cpp:514
msgid "Clear the log contents"
msgstr "Günlük içeriğini temizleyin"

#: ../src/richtext/richtextstyledlg.cpp:252
#: ../src/richtext/richtextstyledlg.cpp:254
msgid "Click to apply the selected style."
msgstr "Seçili biçemi uygulamak için tıklayın."

#: ../src/richtext/richtextliststylepage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:283
#: ../src/richtext/richtextbulletspage.cpp:220
#: ../src/richtext/richtextbulletspage.cpp:222
msgid "Click to browse for a symbol."
msgstr "Bir simge seçmek için tıklayın."

#: ../src/osx/carbon/fontdlg.cpp:403 ../src/osx/carbon/fontdlg.cpp:405
msgid "Click to cancel changes to the font."
msgstr "Yazı türü değişikliklerinden vazgeçmek için tıklayın."

#: ../src/generic/fontdlgg.cpp:472 ../src/generic/fontdlgg.cpp:491
msgid "Click to cancel the font selection."
msgstr "Yazı türü seçiminden vazgeçmek için tıklayın."

#: ../src/osx/carbon/fontdlg.cpp:384 ../src/osx/carbon/fontdlg.cpp:386
msgid "Click to change the font colour."
msgstr "Metin rengini değiştirmek için tıklayın."

#: ../src/richtext/richtextfontpage.cpp:267
#: ../src/richtext/richtextfontpage.cpp:269
msgid "Click to change the text background colour."
msgstr "Metin art alan rengini değiştirmek için tıklayın."

#: ../src/richtext/richtextfontpage.cpp:254
#: ../src/richtext/richtextfontpage.cpp:256
msgid "Click to change the text colour."
msgstr "Metin rengini değiştirmek için tıklayın."

#: ../src/richtext/richtextliststylepage.cpp:195
#: ../src/richtext/richtextliststylepage.cpp:197
msgid "Click to choose the font for this level."
msgstr "Bu düzeyin yazı türünü seçmek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:279
#: ../src/richtext/richtextstyledlg.cpp:281
msgid "Click to close this window."
msgstr "Pencereyi kapatmak için tıklayın."

#: ../src/osx/carbon/fontdlg.cpp:410 ../src/osx/carbon/fontdlg.cpp:412
msgid "Click to confirm changes to the font."
msgstr "Yazı türündeki değişiklikleri onaylamak için tıklayın."

#: ../src/generic/fontdlgg.cpp:477 ../src/generic/fontdlgg.cpp:479
#: ../src/generic/fontdlgg.cpp:484 ../src/generic/fontdlgg.cpp:486
msgid "Click to confirm the font selection."
msgstr "Yazı türü seçimini onaylamak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:244
#: ../src/richtext/richtextstyledlg.cpp:246
msgid "Click to create a new box style."
msgstr "Yeni bir kutu biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:226
#: ../src/richtext/richtextstyledlg.cpp:228
msgid "Click to create a new character style."
msgstr "Yeni bir karakter biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:238
#: ../src/richtext/richtextstyledlg.cpp:240
msgid "Click to create a new list style."
msgstr "Yeni bir liste biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:232
#: ../src/richtext/richtextstyledlg.cpp:234
msgid "Click to create a new paragraph style."
msgstr "Yeni bir paragraf biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtexttabspage.cpp:133
#: ../src/richtext/richtexttabspage.cpp:135
msgid "Click to create a new tab position."
msgstr "Yeni bir sekme konumu oluşturmak için tıklayın."

#: ../src/richtext/richtexttabspage.cpp:145
#: ../src/richtext/richtexttabspage.cpp:147
msgid "Click to delete all tab positions."
msgstr "Tüm sekme konumlarını silmek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:270
#: ../src/richtext/richtextstyledlg.cpp:272
msgid "Click to delete the selected style."
msgstr "Seçili biçemi silmek için tıklayın."

#: ../src/richtext/richtexttabspage.cpp:139
#: ../src/richtext/richtexttabspage.cpp:141
msgid "Click to delete the selected tab position."
msgstr "Seçili sekme konumunu silmek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:264
#: ../src/richtext/richtextstyledlg.cpp:266
msgid "Click to edit the selected style."
msgstr "Seçili biçemi düzenlemek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:258
#: ../src/richtext/richtextstyledlg.cpp:260
msgid "Click to rename the selected style."
msgstr "Seçili biçemi yeniden adlandırmak için tıklayın."

#: ../src/aui/tabmdi.cpp:109 ../src/generic/mdig.cpp:98
msgid "Close All"
msgstr "Tümünü Kapat"

#: ../src/common/stockitem.cpp:266
msgid "Close current document"
msgstr "Geçerli belgeyi kapat"

#: ../src/generic/logg.cpp:516
msgid "Close this window"
msgstr "Bu pencereyi kapat"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6006
msgid "Collapse"
msgstr "Daralt"

#: ../src/richtext/richtextformatdlg.cpp:776
msgid "Colour"
msgstr "Renk"

#: ../src/msw/colordlg.cpp:158
#, c-format
msgid "Colour selection dialog failed with error %0lx."
msgstr "Renk seçimi penceresi %0lx hatasıyla sonlandı."

#: ../src/osx/carbon/fontdlg.cpp:380
msgid "Colour:"
msgstr "Renk:"

#: ../src/generic/datavgen.cpp:6077
#, c-format
msgid "Column %u"
msgstr "Sütun %u"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:114
msgid "Command"
msgstr "Komut"

#: ../src/common/init.cpp:196
#, c-format
msgid ""
"Command line argument %d couldn't be converted to Unicode and will be "
"ignored."
msgstr "%d komut satırı değişkeni Unikoda çevrilemediğinden yok sayılacak."

#: ../src/msw/fontdlg.cpp:120
#, c-format
msgid "Common dialog failed with error code %0lx."
msgstr "Ortak diyalog %0lx hata koduyla sonlandı."

#: ../src/gtk/window.cpp:4649
msgid ""
"Compositing not supported by this system, please enable it in your Window "
"Manager."
msgstr ""
"Sistemin birleştirme (compositing) desteği etkin değil. Lütfen Pencere "
"Yöneticinizden etkinleştirin."

#: ../src/html/helpwnd.cpp:1551
msgid "Compressed HTML Help file (*.chm)|*.chm|"
msgstr "Sıkıştırılmış HTML Yardım dosyası (*.chm)|*.chm|"

#: ../src/generic/dirctrlg.cpp:444
msgid "Computer"
msgstr "Bilgisayarım"

#: ../src/common/fileconf.cpp:934
#, c-format
msgid "Config entry name cannot start with '%c'."
msgstr "Ayar kaydının adı '%c' ile başlayamaz."

#: ../src/generic/filedlgg.cpp:349 ../src/gtk/filedlg.cpp:60
msgid "Confirm"
msgstr "Onayla"

#: ../src/html/htmlwin.cpp:566
msgid "Connecting..."
msgstr "Bağlanılıyor..."

#: ../src/html/helpwnd.cpp:475
msgid "Contents"
msgstr "İçerik"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:880
msgid "ControlDark"
msgstr "DenetimKoyu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:881
msgid "ControlLight"
msgstr "DenetimAçık"

#: ../src/common/strconv.cpp:2262
#, c-format
msgid "Conversion to charset '%s' doesn't work."
msgstr "'%s' karakter kümesine dönüşüm çalışmıyor."

#: ../src/common/stockitem.cpp:149
msgid "Convert"
msgstr "Dönüştür"

#: ../src/html/htmlwin.cpp:1079
#, c-format
msgid "Copied to clipboard:\"%s\""
msgstr "\"%s\" panoya kopyalandı."

#: ../src/generic/prntdlgg.cpp:247
msgid "Copies:"
msgstr "Kopya sayısı:"

#: ../src/common/stockitem.cpp:258
msgid "Copy selection"
msgstr "Seçimi kopyala"

#: ../src/richtext/richtextborderspage.cpp:566
#: ../src/richtext/richtextborderspage.cpp:601
msgid "Corner"
msgstr "Köşe"

#: ../src/richtext/richtextborderspage.cpp:575
msgid "Corner &radius:"
msgstr "Köşe ça&pı:"

#: ../src/html/chm.cpp:718
#, c-format
msgid "Could not create temporary file '%s'"
msgstr "'%s' geçici dosyası oluşturulamadı."

#: ../src/html/chm.cpp:273
#, c-format
msgid "Could not extract %s into %s: %s"
msgstr "%s %s içine ayıklanamadı: %s"

#: ../src/generic/tabg.cpp:1048
msgid "Could not find tab for id"
msgstr "Kodun sekmesi bulunamadı."

#: ../src/gtk/notifmsg.cpp:108
msgid "Could not initalize libnotify."
msgstr "Libnotify başlatılamadı."

#: ../src/html/chm.cpp:444
#, c-format
msgid "Could not locate file '%s'."
msgstr "'%s' dosyası bulunamadı."

#: ../src/common/filefn.cpp:1403
msgid "Could not set current working directory"
msgstr "Geçerli çalışma klasörü ayarlanamadı."

#: ../src/common/prntbase.cpp:2015
msgid "Could not start document preview."
msgstr "Belge önizlemesi başlatılamadı."

#: ../src/generic/printps.cpp:178 ../src/msw/printwin.cpp:210
#: ../src/gtk/print.cpp:1132
msgid "Could not start printing."
msgstr "Yazdırma başlatılamadı."

#: ../src/common/wincmn.cpp:2125
msgid "Could not transfer data to window"
msgstr "Veri pencereye aktarılamadı."

#: ../src/msw/imaglist.cpp:187 ../src/msw/imaglist.cpp:224
#: ../src/msw/imaglist.cpp:249 ../src/msw/dragimag.cpp:185
#: ../src/msw/dragimag.cpp:220
msgid "Couldn't add an image to the image list."
msgstr "Görsel listesine bir görsel eklenemedi."

#: ../src/osx/glcanvas_osx.cpp:414 ../src/unix/glx11.cpp:558
#: ../src/msw/glcanvas.cpp:616
msgid "Couldn't create OpenGL context"
msgstr "OpenGL bağlamı oluşturulamadı"

#: ../src/msw/timer.cpp:134
msgid "Couldn't create a timer"
msgstr "Bir zamanlayıcı oluşturulamadı."

#: ../src/osx/carbon/overlay.cpp:122
msgid "Couldn't create the overlay window"
msgstr "Örtüşme penceresi oluşturulamadı."

#: ../src/common/translation.cpp:2024
msgid "Couldn't enumerate translations"
msgstr "Çeviriler sayılamadı."

#: ../src/common/dynlib.cpp:120
#, c-format
msgid "Couldn't find symbol '%s' in a dynamic library"
msgstr "'%s' simgesi devingen kitaplıkta bulunamadı."

#: ../src/msw/thread.cpp:915
msgid "Couldn't get the current thread pointer"
msgstr "Geçerli iş parçacığı imleci alınamadı."

#: ../src/osx/carbon/overlay.cpp:129
msgid "Couldn't init the context on the overlay window"
msgstr "Örtüşme penceresinde bağlam başlatılamadı."

#: ../src/common/imaggif.cpp:244
msgid "Couldn't initialize GIF hash table."
msgstr "GIF hash tablosu başlatılamadı."

#: ../src/common/imagpng.cpp:409
msgid "Couldn't load a PNG image - file is corrupted or not enough memory."
msgstr "PNG görseli yüklenemedi - dosya bozuk ya da bellek yetersiz."

#: ../src/unix/sound.cpp:470
#, c-format
msgid "Couldn't load sound data from '%s'."
msgstr "Ses verisi '%s' içinden yüklenemedi."

#: ../src/msw/dirdlg.cpp:435
msgid "Couldn't obtain folder name"
msgstr "Klasör adı alınamadı."

#: ../src/unix/sound_sdl.cpp:229
#, c-format
msgid "Couldn't open audio: %s"
msgstr "Ses açılamadı: %s"

#: ../src/msw/ole/dataobj.cpp:377
#, c-format
msgid "Couldn't register clipboard format '%s'."
msgstr "'%s' pano biçimi kaydedilemedi."

#: ../src/msw/listctrl.cpp:869
#, c-format
msgid "Couldn't retrieve information about list control item %d."
msgstr "%d liste denetimi ögesi hakkında bilgi alınamadı."

#: ../src/common/imagpng.cpp:498 ../src/common/imagpng.cpp:509
#: ../src/common/imagpng.cpp:519
msgid "Couldn't save PNG image."
msgstr "PNG görseli kaydedilemedi."

#: ../src/msw/thread.cpp:684
msgid "Couldn't terminate thread"
msgstr "İş parçacığı sonlandırılamadı."

#: ../src/common/xtistrm.cpp:166
#, c-format
msgid "Create Parameter %s not found in declared RTTI Parameters"
msgstr "'Create Parameter' %s bildirilen RTTI parametreleri içinde bulunamadı."

#: ../src/generic/dirdlgg.cpp:288
msgid "Create directory"
msgstr "Klasör oluştur"

#: ../src/generic/filedlgg.cpp:212 ../src/generic/dirdlgg.cpp:111
msgid "Create new directory"
msgstr "Yeni klasör oluştur"

#: ../src/xrc/xmlres.cpp:2460
#, c-format
msgid "Creating %s \"%s\" failed."
msgstr "%s \"%s\" oluşturulamadı."

#: ../src/common/accelcmn.cpp:333
msgid "Ctrl+"
msgstr "Ctrl+"

#: ../src/richtext/richtextctrl.cpp:332 ../src/osx/textctrl_osx.cpp:576
#: ../src/common/stockitem.cpp:151 ../src/msw/textctrl.cpp:2507
msgid "Cu&t"
msgstr "&Kesin"

#: ../src/generic/filectrlg.cpp:940
msgid "Current directory:"
msgstr "Geçerli klasör:"

#: ../src/gtk/print.cpp:217
msgid "Custom size"
msgstr "Özel boyut"

#: ../src/common/headerctrlcmn.cpp:60
msgid "Customize Columns"
msgstr "Sütunları Özelleştir"

#: ../src/common/stockitem.cpp:259
msgid "Cut selection"
msgstr "Seçimi kes"

#: ../src/common/fmapbase.cpp:152
msgid "Cyrillic (ISO-8859-5)"
msgstr "Kril (ISO-8859-5)"

#: ../src/common/paper.cpp:99
msgid "D sheet, 22 x 34 in"
msgstr "D sayfa, 22 x 34 inç"

#: ../src/msw/dde.cpp:703
msgid "DDE poke request failed"
msgstr "DDE itme isteği yapılamadı."

#: ../src/common/imagbmp.cpp:1169
msgid "DIB Header: Encoding doesn't match bitdepth."
msgstr "DIB Başlık Bilgisi: Kodlama, bit derinliğine uymuyor."

#: ../src/common/imagbmp.cpp:1074
msgid "DIB Header: Image height > 32767 pixels for file."
msgstr "DIB Başlık Bilgisi: Dosya için görsel yüksekliği > 32767 piksel."

#: ../src/common/imagbmp.cpp:1066
msgid "DIB Header: Image width > 32767 pixels for file."
msgstr "DIB Başlık Bilgisi: Dosya için görsel genişliği > 32767 piksel."

#: ../src/common/imagbmp.cpp:1094
msgid "DIB Header: Unknown bitdepth in file."
msgstr "DIB Başlık Bilgisi: Dosyada bilinmeyen bit derinliği."

#: ../src/common/imagbmp.cpp:1149
msgid "DIB Header: Unknown encoding in file."
msgstr "DIB Başlık Bilgisi: Dosyada bilinmeyen kodlama."

#: ../src/common/paper.cpp:121
msgid "DL Envelope, 110 x 220 mm"
msgstr "DL Zarf, 110 x 220 mm"

#: ../src/richtext/richtextborderspage.cpp:613
msgid "Dashed"
msgstr "Çizgili"

#: ../src/generic/dbgrptg.cpp:300
#, c-format
msgid "Debug report \"%s\""
msgstr "Hata ayıklama raporu \"%s\""

#: ../src/common/debugrpt.cpp:210
msgid "Debug report couldn't be created."
msgstr "Hata ayıklama raporu oluşturulamadı."

#: ../src/common/debugrpt.cpp:553
msgid "Debug report generation has failed."
msgstr "Hata ayıklama raporu oluşturulamadı."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:84
msgid "Decimal"
msgstr "Ondalık"

#: ../src/generic/fontdlgg.cpp:323
msgid "Decorative"
msgstr "Süslü"

#: ../src/common/fmapbase.cpp:796
msgid "Default encoding"
msgstr "Varsayılan kodlama"

#: ../src/generic/prntdlgg.cpp:510
msgid "Default printer"
msgstr "Varsayılan yazıcı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:51
msgid "Del"
msgstr "Del"

#: ../src/richtext/richtexttabspage.cpp:144
msgid "Delete A&ll"
msgstr "Tümünü Si&l"

#: ../src/richtext/richtextbuffer.cpp:11341
msgid "Delete Column"
msgstr "Sütunu Sil"

#: ../src/richtext/richtextbuffer.cpp:11291
msgid "Delete Row"
msgstr "Satırı Sil"

#: ../src/richtext/richtextstyledlg.cpp:782
msgid "Delete Style"
msgstr "Biçemi Sil"

#: ../src/richtext/richtextctrl.cpp:1345 ../src/richtext/richtextctrl.cpp:1584
msgid "Delete Text"
msgstr "Metni Sil"

#: ../src/generic/editlbox.cpp:170
msgid "Delete item"
msgstr "Ögeyi Sil"

#: ../src/common/stockitem.cpp:260
msgid "Delete selection"
msgstr "Seçimi sil"

#: ../src/richtext/richtextstyledlg.cpp:782
#, c-format
msgid "Delete style %s?"
msgstr "%s biçemi silinsin mi?"

#: ../src/unix/snglinst.cpp:301
#, c-format
msgid "Deleted stale lock file '%s'."
msgstr "Eski kilit dosyası '%s' silindi."

#: ../src/common/secretstore.cpp:220
#, c-format
msgid "Deleting password for \"%s/%s\" failed: %s."
msgstr "\"%s/%s\" için parola silinemedi: %s."

#: ../src/common/module.cpp:124
#, c-format
msgid "Dependency \"%s\" of module \"%s\" doesn't exist."
msgstr "\"%s\" bağlılığı \"%s\" modülü için bulunamadı."

#: ../src/common/stockitem.cpp:196
msgid "Descending"
msgstr "Azalan"

#. TRANSLATORS: Keyword of system colour
#: ../src/generic/dirctrlg.cpp:526 ../src/propgrid/advprops.cpp:882
msgid "Desktop"
msgstr "Masaüstü"

#: ../src/generic/aboutdlgg.cpp:70
msgid "Developed by "
msgstr "Geliştirici "

#: ../src/generic/aboutdlgg.cpp:176
msgid "Developers"
msgstr "Geliştiriciler"

#: ../src/msw/dialup.cpp:374
msgid ""
"Dial up functions are unavailable because the remote access service (RAS) is "
"not installed on this machine. Please install it."
msgstr ""
"Uzaktan erişim hizmeti (RAS) kurulu olmadığı için arama işlevleri "
"kullanılamıyor. Lütfen kurun."

#: ../src/generic/tipdlg.cpp:211
msgid "Did you know..."
msgstr "Biliyor musunuz..."

#: ../src/dfb/wrapdfb.cpp:63
#, c-format
msgid "DirectFB error %d occurred."
msgstr "%d DirectFB hatası oluştu."

#: ../src/motif/filedlg.cpp:219
msgid "Directories"
msgstr "Klasörler"

#: ../src/common/filefn.cpp:1183
#, c-format
msgid "Directory '%s' couldn't be created"
msgstr "'%s' klasörü oluşturulamadı"

#: ../src/common/filefn.cpp:1197
#, c-format
msgid "Directory '%s' couldn't be deleted"
msgstr "'%s' klasörü silinemedi"

#: ../src/generic/dirdlgg.cpp:204
msgid "Directory does not exist"
msgstr "Klasör bulunamadı"

#: ../src/generic/filectrlg.cpp:1399
msgid "Directory doesn't exist."
msgstr "Klasör bulunamadı."

#: ../src/common/docview.cpp:457
msgid "Discard changes and reload the last saved version?"
msgstr "Değişiklikler iptal edilip son kaydedilmiş sürüme dönülsün mü?"

#: ../src/html/helpwnd.cpp:502
msgid ""
"Display all index items that contain given substring. Search is case "
"insensitive."
msgstr ""
"Verilen alt dizgeyi içeren tüm dizin elemanları görüntülensin. Arama küçük-"
"büyük harfe duyarlıdır."

#: ../src/html/helpwnd.cpp:679
msgid "Display options dialog"
msgstr "Ayarlar penceresi görüntülensin"

#: ../src/html/helpwnd.cpp:322
msgid "Displays help as you browse the books on the left."
msgstr "Soldaki kitapları gezilirken yardım görüntülenir."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:85
msgid "Divide"
msgstr "Bölü"

#: ../src/common/docview.cpp:533
#, c-format
msgid "Do you want to save changes to %s?"
msgstr "%s üzerinde yapılan değişiklikleri kaydetmek istiyor musunuz?"

#: ../src/common/prntbase.cpp:542
msgid "Document:"
msgstr "Belge:"

#: ../src/generic/aboutdlgg.cpp:73
msgid "Documentation by "
msgstr "Belgeleyen "

#: ../src/generic/aboutdlgg.cpp:180
msgid "Documentation writers"
msgstr "Belge yazarları"

#: ../src/common/sizer.cpp:2799
msgid "Don't Save"
msgstr "Kaydedilmesin"

#: ../src/html/htmlwin.cpp:633
msgid "Done"
msgstr "Tamamlandı"

#: ../src/generic/progdlgg.cpp:448 ../src/msw/progdlg.cpp:407
msgid "Done."
msgstr "Tamamlandı."

#: ../src/richtext/richtextborderspage.cpp:612
msgid "Dotted"
msgstr "Noktalı"

#: ../src/richtext/richtextborderspage.cpp:614
msgid "Double"
msgstr "Çift"

#: ../src/common/paper.cpp:176
msgid "Double Japanese Postcard Rotated 148 x 200 mm"
msgstr "Japon Çift Postakartı Çevrilmiş 148 x 200 mm"

#: ../src/common/xtixml.cpp:273
#, c-format
msgid "Doubly used id : %d"
msgstr "Kod iki kez kullanılmış: %d"

#. TRANSLATORS: Name of keyboard key
#: ../src/generic/fdrepdlg.cpp:152 ../src/common/stockitem.cpp:153
#: ../src/common/accelcmn.cpp:64
msgid "Down"
msgstr "Aşağı"

#: ../src/common/paper.cpp:100
msgid "E sheet, 34 x 44 in"
msgstr "E sayfa, 34 x 44 inç"

#: ../src/unix/fswatcher_inotify.cpp:561
msgid "EOF while reading from inotify descriptor"
msgstr "inotify belirteci okunurken dosya sonuna ulaşıldı"

#: ../src/generic/editlbox.cpp:168
msgid "Edit item"
msgstr "Ögeyi düzenle"

#: ../include/wx/generic/progdlgg.h:84
msgid "Elapsed time:"
msgstr "Geçen süre:"

#: ../src/richtext/richtextsizepage.cpp:353
#: ../src/richtext/richtextsizepage.cpp:355
#: ../src/richtext/richtextsizepage.cpp:465
#: ../src/richtext/richtextsizepage.cpp:467
msgid "Enable the height value."
msgstr "Yükseklik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:438
#: ../src/richtext/richtextsizepage.cpp:440
msgid "Enable the maximum width value."
msgstr "En büyük genişlik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:411
#: ../src/richtext/richtextsizepage.cpp:413
msgid "Enable the minimum height value."
msgstr "En büyük yükseklik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:384
#: ../src/richtext/richtextsizepage.cpp:386
msgid "Enable the minimum width value."
msgstr "En küçük genişlik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:319
#: ../src/richtext/richtextsizepage.cpp:321
msgid "Enable the width value."
msgstr "Genişlik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:280
#: ../src/richtext/richtextsizepage.cpp:282
msgid "Enable vertical alignment."
msgstr "Dikey hizalama kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:162
#: ../src/richtext/richtextbackgroundpage.cpp:164
msgid "Enables a background colour."
msgstr "Art alan rengi kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:196
#: ../src/richtext/richtextbackgroundpage.cpp:198
msgid "Enables a shadow."
msgstr "Gölge kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:300
#: ../src/richtext/richtextbackgroundpage.cpp:302
msgid "Enables the blur distance."
msgstr "Bulanıklık uzaklığı kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:260
#: ../src/richtext/richtextbackgroundpage.cpp:262
msgid "Enables the shadow colour."
msgstr "Gölge rengi kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:327
#: ../src/richtext/richtextbackgroundpage.cpp:329
msgid "Enables the shadow opacity."
msgstr "Gölge matlığı kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:273
#: ../src/richtext/richtextbackgroundpage.cpp:275
msgid "Enables the shadow spread."
msgstr "Gölge yayma kullanılsın."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:66
msgid "End"
msgstr "End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:55
msgid "Enter"
msgstr "Enter"

#: ../src/richtext/richtextstyledlg.cpp:934
msgid "Enter a box style name"
msgstr "Bir kutu biçemi adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:606
msgid "Enter a character style name"
msgstr "Bir karakter biçemi adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:820
msgid "Enter a list style name"
msgstr "Bir liste biçemi adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:893
msgid "Enter a new style name"
msgstr "Yeni bir biçem adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:654
msgid "Enter a paragraph style name"
msgstr "Bir paragraf biçemi adı yazın"

#: ../src/generic/dbgrptg.cpp:174
#, c-format
msgid "Enter command to open file \"%s\":"
msgstr "\"%s\" dosyasını açacak komutu yazın:"

#: ../src/generic/helpext.cpp:459
msgid "Entries found"
msgstr "Bulunan kayıt"

#: ../src/common/paper.cpp:142
msgid "Envelope Invite 220 x 220 mm"
msgstr "Davetiye Zarf 220 x 220 mm"

#: ../src/common/config.cpp:469
#, c-format
msgid ""
"Environment variables expansion failed: missing '%c' at position %u in '%s'."
msgstr "Ortam değişkenleri açılamadı: eksik '%c', konum %u, '%s' içinde."

#: ../src/unix/epolldispatcher.cpp:103
msgid "Error closing epoll descriptor"
msgstr "Epoll tanımlayıcı kapatma hatası"

#: ../src/unix/fswatcher_kqueue.cpp:114
msgid "Error closing kqueue instance"
msgstr "Kqueue kopyası kapatılırken hata"

#: ../src/common/filefn.cpp:1049
#, c-format
msgid "Error copying the file '%s' to '%s'."
msgstr "'%s' dosyası '%s' içine kopyalanamadı."

#: ../src/generic/dirdlgg.cpp:222
msgid "Error creating directory"
msgstr "Klasör oluşturulurken sorun çıktı"

#: ../src/common/imagbmp.cpp:1181
msgid "Error in reading image DIB."
msgstr "DIB görüntüsü okuma sorunu."

#: ../src/propgrid/propgrid.cpp:6696
#, c-format
msgid "Error in resource: %s"
msgstr "%s kaynağında sorun"

#: ../src/common/fileconf.cpp:422
msgid "Error reading config options."
msgstr "Ayarlar okunurken sorun çıktı."

#: ../src/common/fileconf.cpp:1029
msgid "Error saving user configuration data."
msgstr "Kullanıcı ayarları kaydedilirken sorun çıktı."

#: ../src/gtk/print.cpp:722
msgid "Error while printing: "
msgstr "Yazdırma sorunu: "

#: ../src/common/log.cpp:219
msgid "Error: "
msgstr "Hata: "

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:70
msgid "Escape"
msgstr "Escape"

#: ../src/common/fmapbase.cpp:150
msgid "Esperanto (ISO-8859-3)"
msgstr "Esperanto (ISO-8859-3)"

#: ../include/wx/generic/progdlgg.h:85
msgid "Estimated time:"
msgstr "Öngörülen süre:"

#: ../src/generic/dbgrptg.cpp:234
msgid "Executable files (*.exe)|*.exe|"
msgstr "Yürütülebilir dosyalar (*.exe)|*.exe|"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:155 ../src/common/accelcmn.cpp:78
msgid "Execute"
msgstr "Yürüt"

#: ../src/msw/utilsexc.cpp:876
#, c-format
msgid "Execution of command '%s' failed"
msgstr "'%s' komutu yürütülemedi"

#: ../src/common/paper.cpp:105
msgid "Executive, 7 1/4 x 10 1/2 in"
msgstr "Executive, 7 1/4 x 10 1/2 inç"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6009
msgid "Expand"
msgstr "Genişlet"

#: ../src/msw/registry.cpp:1240
#, c-format
msgid ""
"Exporting registry key: file \"%s\" already exists and won't be overwritten."
msgstr "Kayıt anahtarı verme: \"%s\" dosyası zaten var, üzerine yazılmayacak."

#: ../src/common/fmapbase.cpp:195
msgid "Extended Unix Codepage for Japanese (EUC-JP)"
msgstr "Japonca için genişletilmiş Unix Codepage (EUC-JP)"

#: ../src/html/chm.cpp:725
#, c-format
msgid "Extraction of '%s' into '%s' failed."
msgstr "'%s'', '%s' içine açılamadı."

#: ../src/common/accelcmn.cpp:249 ../src/common/accelcmn.cpp:344
msgid "F"
msgstr "F"

#. TRANSLATORS: Label of font face name
#: ../src/propgrid/advprops.cpp:672
msgid "Face Name"
msgstr "Yazı Türü Adı"

#: ../src/unix/snglinst.cpp:269
msgid "Failed to access lock file."
msgstr "Kilit dosyasına erişilemedi."

#: ../src/unix/epolldispatcher.cpp:116
#, c-format
msgid "Failed to add descriptor %d to epoll descriptor %d"
msgstr "%d tanımlayıcısı %d epoll tanımlayısıcına eklenemedi"

#: ../src/msw/dib.cpp:489
#, c-format
msgid "Failed to allocate %luKb of memory for bitmap data."
msgstr "Bit eşlem verisi için %luKb bellek ayrılamadı."

#: ../src/common/glcmn.cpp:115
msgid "Failed to allocate colour for OpenGL"
msgstr "OpenGL için renk ayarlanamadı"

#: ../src/unix/displayx11.cpp:236
msgid "Failed to change video mode"
msgstr "Görüntü kipi değiştirilemedi"

#: ../src/common/image.cpp:3277
#, c-format
msgid "Failed to check format of image file \"%s\"."
msgstr "\"%s\" görsel dosyasının biçimi denetlenemedi."

#: ../src/common/debugrpt.cpp:239
#, c-format
msgid "Failed to clean up debug report directory \"%s\""
msgstr "\"%s\" hata ayıklama rapor klasörü temizlenemedi"

#: ../src/common/filename.cpp:192
msgid "Failed to close file handle"
msgstr "Dosya işleyici kapatılamadı"

#: ../src/unix/snglinst.cpp:340
#, c-format
msgid "Failed to close lock file '%s'"
msgstr "'%s' kilit dosyası kapatılamadı"

#: ../src/msw/clipbrd.cpp:112
msgid "Failed to close the clipboard."
msgstr "Pano kapatılamadı."

#: ../src/x11/utils.cpp:208
#, c-format
msgid "Failed to close the display \"%s\""
msgstr "\"%s\" görüntüsü kapatılamadı"

#: ../src/msw/dialup.cpp:797
msgid "Failed to connect: missing username/password."
msgstr "Bağlanılamadı: kullanıcı adı/parola eksik."

#: ../src/msw/dialup.cpp:743
msgid "Failed to connect: no ISP to dial."
msgstr "Bağlanılamadı: aranacak ISS yok."

#: ../src/common/textfile.cpp:203
#, c-format
msgid "Failed to convert file \"%s\" to Unicode."
msgstr "\"%s\" dosyası Unikoda çevrilemedi."

#: ../src/generic/logg.cpp:956
msgid "Failed to copy dialog contents to the clipboard."
msgstr "Pencere içeriği panoya kopyalanamadı."

#: ../src/msw/registry.cpp:692
#, c-format
msgid "Failed to copy registry value '%s'"
msgstr "'%s' kayıt değeri kopyalanamadı"

#: ../src/msw/registry.cpp:701
#, c-format
msgid "Failed to copy the contents of registry key '%s' to '%s'."
msgstr "'%s' kayıt anahtarının içeriği '%s' içine kopyalanamadı."

#: ../src/common/filefn.cpp:1015
#, c-format
msgid "Failed to copy the file '%s' to '%s'"
msgstr "'%s' dosyası '%s' içine kopyalanamadı"

#: ../src/msw/registry.cpp:679
#, c-format
msgid "Failed to copy the registry subkey '%s' to '%s'."
msgstr "'%s' kayıt alt anahtarı '%s' içine kopyalanamadı."

#: ../src/msw/dde.cpp:1070
msgid "Failed to create DDE string"
msgstr "DDE dizgesi oluşturulamadı"

#: ../src/msw/mdi.cpp:616
msgid "Failed to create MDI parent frame."
msgstr "MDI üst çerçevesi oluşturulamadı."

#: ../src/common/filename.cpp:1027
msgid "Failed to create a temporary file name"
msgstr "Geçici dosya adı oluşturulamadı"

#: ../src/msw/utilsexc.cpp:228
msgid "Failed to create an anonymous pipe"
msgstr "Anonim bir boru oluşturulamadı"

#: ../src/msw/ole/automtn.cpp:522
#, c-format
msgid "Failed to create an instance of \"%s\""
msgstr "\"%s\" kopyası oluşturulamadı"

#: ../src/msw/dde.cpp:437
#, c-format
msgid "Failed to create connection to server '%s' on topic '%s'"
msgstr "'%s' sunucusuna '%s' konusundan bağlantı kurulamadı"

#: ../src/msw/cursor.cpp:204
msgid "Failed to create cursor."
msgstr "İmleç oluşturulamadı."

#: ../src/common/debugrpt.cpp:209
#, c-format
msgid "Failed to create directory \"%s\""
msgstr "\"%s\" klasörü oluşturulamadı"

#: ../src/generic/dirdlgg.cpp:220
#, c-format
msgid ""
"Failed to create directory '%s'\n"
"(Do you have the required permissions?)"
msgstr ""
"'%s' klasörü oluşturulamadı\n"
"(Yeterli izniniz var mı?)"

#: ../src/unix/epolldispatcher.cpp:84
msgid "Failed to create epoll descriptor"
msgstr "Epoll tanımlayıcısı oluşturulamadı"

#: ../src/msw/mimetype.cpp:238
#, c-format
msgid "Failed to create registry entry for '%s' files."
msgstr "'%s' dosyaları için kayıt anahtarı oluşturulamadı."

#: ../src/msw/fdrepdlg.cpp:409
#, c-format
msgid "Failed to create the standard find/replace dialog (error code %d)"
msgstr "Standart bul/değiştir penceresi oluşturulamadı (hata kodu %d)"

#: ../src/unix/wakeuppipe.cpp:52
msgid "Failed to create wake up pipe used by event loop."
msgstr "Olay döngüsünde kullanılan uyandırma borusu oluşturulamadı."

#: ../src/html/winpars.cpp:730
#, c-format
msgid "Failed to display HTML document in %s encoding"
msgstr "HTML belgesi %s kodlamasıyla görüntülenemedi"

#: ../src/msw/clipbrd.cpp:124
msgid "Failed to empty the clipboard."
msgstr "Pano temizlenemedi."

#: ../src/unix/displayx11.cpp:212
msgid "Failed to enumerate video modes"
msgstr "Görüntü kipleri sıralanamadı"

#: ../src/msw/dde.cpp:722
msgid "Failed to establish an advise loop with DDE server"
msgstr "DDE sunucusuyla danışma döngüsü sağlanamadı"

#: ../src/msw/dialup.cpp:629 ../src/msw/dialup.cpp:863
#, c-format
msgid "Failed to establish dialup connection: %s"
msgstr "Çevirmeli bağlantı gerçekleştirilemedi: %s"

#: ../src/unix/utilsunx.cpp:611
#, c-format
msgid "Failed to execute '%s'\n"
msgstr "'%s' çalıştırılamadı\n"

#: ../src/common/debugrpt.cpp:720
msgid "Failed to execute curl, please install it in PATH."
msgstr "Curl çalıştırılamadı, lütfen YOL içine yükleyin."

#: ../src/msw/ole/automtn.cpp:505
#, c-format
msgid "Failed to find CLSID of \"%s\""
msgstr "\"%s\" için CLSID bulunamadı"

#: ../src/common/regex.cpp:431 ../src/common/regex.cpp:479
#, c-format
msgid "Failed to find match for regular expression: %s"
msgstr "Kurallı ifadeye uygun veri bulunamadı: %s"

#: ../src/msw/dialup.cpp:695
#, c-format
msgid "Failed to get ISP names: %s"
msgstr "ISS adları alınamadı: %s"

#: ../src/msw/ole/automtn.cpp:574
#, c-format
msgid "Failed to get OLE automation interface for \"%s\""
msgstr "\"%s\" için OLE otomasyonu arayüzü getirilemedi"

#: ../src/msw/clipbrd.cpp:711
msgid "Failed to get data from the clipboard"
msgstr "Panodan veri alınamadı"

#: ../src/common/time.cpp:223
msgid "Failed to get the local system time"
msgstr "Yerel sistem zamanı alınamadı"

#: ../src/common/filefn.cpp:1345
msgid "Failed to get the working directory"
msgstr "Çalışma klasörü alınamadı"

#: ../src/univ/theme.cpp:114
msgid "Failed to initialize GUI: no built-in themes found."
msgstr "GUI başlatılamadı: içsel bir tema bulunamadı."

#: ../src/msw/helpchm.cpp:63
msgid "Failed to initialize MS HTML Help."
msgstr "MS HTML Yardım başlatılamadı."

#: ../src/msw/glcanvas.cpp:1381
msgid "Failed to initialize OpenGL"
msgstr "OpenGL başlatılamadı"

#: ../src/msw/dialup.cpp:858
#, c-format
msgid "Failed to initiate dialup connection: %s"
msgstr "Çevirmeli bağlantı başlatılamadı: %s"

#: ../src/gtk/textctrl.cpp:1128
msgid "Failed to insert text in the control."
msgstr "Metin denetime eklenemedi."

#: ../src/unix/snglinst.cpp:241
#, c-format
msgid "Failed to inspect the lock file '%s'"
msgstr "'%s' kilit dosyası incelenemedi"

#: ../src/unix/appunix.cpp:182
msgid "Failed to install signal handler"
msgstr "İşaret işleyici kurulamadı"

#: ../src/unix/threadpsx.cpp:1167
msgid ""
"Failed to join a thread, potential memory leak detected - please restart the "
"program"
msgstr ""
"İş parçacığına bağlanılamadı, olası bellek taşması bulundu - lütfen programı "
"yeniden başlatın"

#: ../src/msw/utils.cpp:629
#, c-format
msgid "Failed to kill process %d"
msgstr "%d işlemi sonlandırılamadı"

#: ../src/common/image.cpp:2500
#, c-format
msgid "Failed to load bitmap \"%s\" from resources."
msgstr "Kaynaklardan \"%s\" bit eşlemi yüklenemedi."

#: ../src/common/image.cpp:2509
#, c-format
msgid "Failed to load icon \"%s\" from resources."
msgstr "Kaynaklardan \"%s\" simgesi yüklenemedi."

#: ../src/common/iconbndl.cpp:225
#, c-format
msgid "Failed to load icons from resource '%s'."
msgstr "'%s' kaynağından simgeler yüklenemedi."

#: ../src/common/iconbndl.cpp:200
#, c-format
msgid "Failed to load image %%d from file '%s'."
msgstr "%%d görseli '%s' dosyasından yüklenemedi."

#: ../src/common/iconbndl.cpp:208
#, c-format
msgid "Failed to load image %d from stream."
msgstr "%d görseli akıştan yüklenemedi."

#: ../src/common/image.cpp:2587 ../src/common/image.cpp:2606
#, c-format
msgid "Failed to load image from file \"%s\"."
msgstr "\"%s\" dosyasından görsel yüklenemedi."

#: ../src/msw/enhmeta.cpp:97
#, c-format
msgid "Failed to load metafile from file \"%s\"."
msgstr "\"%s\" dosyasından metafile yüklenemedi."

#: ../src/msw/volume.cpp:327
msgid "Failed to load mpr.dll."
msgstr "mpr.dll yüklenemedi."

#: ../src/msw/utils.cpp:953
#, c-format
msgid "Failed to load resource \"%s\"."
msgstr "\"%s\" kaynağı yüklenemedi."

#: ../src/common/dynlib.cpp:92
#, c-format
msgid "Failed to load shared library '%s'"
msgstr "'%s' paylaşılmış kitaplığı yüklenemedi"

#: ../src/osx/core/sound.cpp:145
#, c-format
msgid "Failed to load sound from \"%s\" (error %d)."
msgstr "\"%s\" üzerinden ses yüklenemedi (hata %d)."

#: ../src/msw/utils.cpp:960
#, c-format
msgid "Failed to lock resource \"%s\"."
msgstr "\"%s\" kaynağı kilitlenemedi."

#: ../src/unix/snglinst.cpp:198
#, c-format
msgid "Failed to lock the lock file '%s'"
msgstr "'%s' kilit dosyası kilitlenemedi"

#: ../src/unix/epolldispatcher.cpp:136
#, c-format
msgid "Failed to modify descriptor %d in epoll descriptor %d"
msgstr "%d tanımlayıcısı değiştirilemedi (epoll %d tanımlayıcısındaki)"

#: ../src/common/filename.cpp:2575
#, c-format
msgid "Failed to modify file times for '%s'"
msgstr "'%s' için dosya zamanları değiştirilemedi"

#: ../src/common/selectdispatcher.cpp:258
msgid "Failed to monitor I/O channels"
msgstr "Giriş/Çıkış kanalları izlenemedi"

#: ../src/common/filename.cpp:175
#, c-format
msgid "Failed to open '%s' for reading"
msgstr "'%s' okunmak üzere açılamadı"

#: ../src/common/filename.cpp:180
#, c-format
msgid "Failed to open '%s' for writing"
msgstr "'%s' yazılmak üzere açılamadı"

#: ../src/html/chm.cpp:141
#, c-format
msgid "Failed to open CHM archive '%s'."
msgstr "'%s' CHM arşivi açılamadı."

#: ../src/common/utilscmn.cpp:1126
#, c-format
msgid "Failed to open URL \"%s\" in default browser."
msgstr "'%s' İnternet adresi varsayılan tarayıcıyla açılamadı."

#: ../include/wx/msw/private/fswatcher.h:92
#, c-format
msgid "Failed to open directory \"%s\" for monitoring."
msgstr "\"%s\"klasörü izlenmek üzere açılamadı."

#: ../src/x11/utils.cpp:227
#, c-format
msgid "Failed to open display \"%s\"."
msgstr "\"%s\" görüntüsü açılamadı."

#: ../src/common/filename.cpp:1062
msgid "Failed to open temporary file."
msgstr "Geçici dosya açılamadı."

#: ../src/msw/clipbrd.cpp:91
msgid "Failed to open the clipboard."
msgstr "Pano açılamadı."

#: ../src/common/translation.cpp:1184
#, c-format
msgid "Failed to parse Plural-Forms: '%s'"
msgstr "Çoğul-formlar ayrıştırılamadı: '%s'"

#: ../src/unix/mediactrl.cpp:1214
#, c-format
msgid "Failed to prepare playing \"%s\"."
msgstr "\"%s\" oynatmaya hazırlanamadı."

#: ../src/msw/clipbrd.cpp:600
msgid "Failed to put data on the clipboard"
msgstr "Veri panoya konulamadı"

#: ../src/unix/snglinst.cpp:278
msgid "Failed to read PID from lock file."
msgstr "Kilit dosyasından PID okunamadı."

#: ../src/common/fileconf.cpp:433
msgid "Failed to read config options."
msgstr "Ayarlar okunamadı."

#: ../src/common/docview.cpp:681
#, c-format
msgid "Failed to read document from the file \"%s\"."
msgstr "\"%s\" dosyasından belge okunamadı."

#: ../src/dfb/evtloop.cpp:98
msgid "Failed to read event from DirectFB pipe"
msgstr "DirectFB borusundan olay okunamadı"

#: ../src/unix/wakeuppipe.cpp:120
msgid "Failed to read from wake-up pipe"
msgstr "Uyandırma borusu okunamadı"

#: ../src/unix/utilsunx.cpp:679
msgid "Failed to redirect child process input/output"
msgstr "Alt iş giriş/çıkışı yönlendirilemedi"

#: ../src/msw/utilsexc.cpp:701
msgid "Failed to redirect the child process IO"
msgstr "Alt iş giriş/çıkışı yönlendirilemedi"

#: ../src/msw/dde.cpp:288
#, c-format
msgid "Failed to register DDE server '%s'"
msgstr "'%s' DDE sunucusuna kayıt olunamadı"

#: ../src/common/fontmap.cpp:245
#, c-format
msgid "Failed to remember the encoding for the charset '%s'."
msgstr "'%s' karakter kümesi için kodlama anımsanamadı."

#: ../src/common/debugrpt.cpp:227
#, c-format
msgid "Failed to remove debug report file \"%s\""
msgstr "\"%s\" hata ayıklama rapor dosyası silinemedi"

#: ../src/unix/snglinst.cpp:328
#, c-format
msgid "Failed to remove lock file '%s'"
msgstr "'%s' kilit dosyası silinemedi"

#: ../src/unix/snglinst.cpp:288
#, c-format
msgid "Failed to remove stale lock file '%s'."
msgstr "'%s' eski kilit dosyası silinemedi."

#: ../src/msw/registry.cpp:529
#, c-format
msgid "Failed to rename registry value '%s' to '%s'."
msgstr "'%s' kayıt değeri '%s' olarak yeniden adlandırılamadı."

#: ../src/common/filefn.cpp:1122
#, c-format
msgid ""
"Failed to rename the file '%s' to '%s' because the destination file already "
"exists."
msgstr ""
"'%s' dosyası aynı adlı bir dosya olduğundan '%s' olarak yeniden "
"adlandırılamadı."

#: ../src/msw/registry.cpp:634
#, c-format
msgid "Failed to rename the registry key '%s' to '%s'."
msgstr "'%s' kayıt anahtarı '%s' olarak yeniden adlandırılamadı."

#: ../src/common/filename.cpp:2671
#, c-format
msgid "Failed to retrieve file times for '%s'"
msgstr "'%s' için dosya zamanları alınamadı"

#: ../src/msw/dialup.cpp:468
msgid "Failed to retrieve text of RAS error message"
msgstr "RAS hata iletisi metni alınamadı"

#: ../src/msw/clipbrd.cpp:748
msgid "Failed to retrieve the supported clipboard formats"
msgstr "Desteklenen pano biçimleri alınamadı"

#: ../src/common/docview.cpp:652
#, c-format
msgid "Failed to save document to the file \"%s\"."
msgstr "Belge \"%s\" dosyasına kaydedilemedi."

#: ../src/msw/dib.cpp:269
#, c-format
msgid "Failed to save the bitmap image to file \"%s\"."
msgstr "Bit eşlemi görüntüsü \"%s\" dosyasına kaydedilemedi."

#: ../src/msw/dde.cpp:763
msgid "Failed to send DDE advise notification"
msgstr "DDE danışma uyarısı gönderilemedi"

#: ../src/common/ftp.cpp:402
#, c-format
msgid "Failed to set FTP transfer mode to %s."
msgstr "FTP aktarım kipi %s olarak ayarlanamadı."

#: ../src/msw/clipbrd.cpp:427
msgid "Failed to set clipboard data."
msgstr "Pano verisi ayarlanamadı."

#: ../src/unix/snglinst.cpp:181
#, c-format
msgid "Failed to set permissions on lock file '%s'"
msgstr "'%s' kilit dosyasının izinleri ayarlanamadı"

#: ../src/unix/utilsunx.cpp:668
msgid "Failed to set process priority"
msgstr "İşlem önceliği ayarlanamadı"

#: ../src/common/file.cpp:559
msgid "Failed to set temporary file permissions"
msgstr "Geçici dosya izinleri ayarlanamadı"

#: ../src/gtk/textctrl.cpp:1072
msgid "Failed to set text in the text control."
msgstr "Metin denetime yerleştirilemedi."

#: ../src/unix/threadpsx.cpp:1298
#, c-format
msgid "Failed to set thread concurrency level to %lu"
msgstr "%lu iş parçacığı öncelik düzeyi ayarlanamadı."

#: ../src/unix/threadpsx.cpp:1424
#, c-format
msgid "Failed to set thread priority %d."
msgstr "%d iş parçacığı önceliği ayarlanamadı."

#: ../src/unix/utilsunx.cpp:783
msgid "Failed to set up non-blocking pipe, the program might hang."
msgstr "Engellemesiz boru kurulamadı, program takılabilir."

#: ../src/common/fs_mem.cpp:261
#, c-format
msgid "Failed to store image '%s' to memory VFS!"
msgstr "'%s' görüntüsü VFS belleğine yerleştirilemedi!"

#: ../src/dfb/evtloop.cpp:170
msgid "Failed to switch DirectFB pipe to non-blocking mode"
msgstr "DirectFB borusu engellemesiz kipe döndürülemedi"

#: ../src/unix/wakeuppipe.cpp:59
msgid "Failed to switch wake up pipe to non-blocking mode"
msgstr "Uyandırma borusu engellemesiz kipe döndürülemedi"

#: ../src/unix/threadpsx.cpp:1605
msgid "Failed to terminate a thread."
msgstr "Bir iş parçacığı sonlandırılamadı."

#: ../src/msw/dde.cpp:741
msgid "Failed to terminate the advise loop with DDE server"
msgstr "DDE sunucusuyla danışma döngüsü sonlandırılamadı"

#: ../src/msw/dialup.cpp:938
#, c-format
msgid "Failed to terminate the dialup connection: %s"
msgstr "Çevirmeli bağlantı sonlandırılamadı: %s"

#: ../src/common/filename.cpp:2590
#, c-format
msgid "Failed to touch the file '%s'"
msgstr "'%s' dosyasına dokunulamadı"

#: ../src/unix/snglinst.cpp:334
#, c-format
msgid "Failed to unlock lock file '%s'"
msgstr "'%s' kilit dosyasının kilidi kaldırılamadı"

#: ../src/msw/dde.cpp:309
#, c-format
msgid "Failed to unregister DDE server '%s'"
msgstr "'%s' DDE sunucusundan kayıt iptali yapılamadı"

#: ../src/unix/epolldispatcher.cpp:155
#, c-format
msgid "Failed to unregister descriptor %d from epoll descriptor %d"
msgstr "%d tanımlayıcısı kaldırılamadı (%d epoll tanımlayıcısından)"

#: ../src/common/fileconf.cpp:1006
msgid "Failed to update user configuration file."
msgstr "Kullanıcı ayarları dosyası kaydedilemedi."

#: ../src/common/debugrpt.cpp:733
#, c-format
msgid "Failed to upload the debug report (error code %d)."
msgstr "Hata ayıklama raporu yüklenemedi (hata kodu %d)."

#: ../src/unix/snglinst.cpp:168
#, c-format
msgid "Failed to write to lock file '%s'"
msgstr "'%s' kilit dosyasına yazılamadı"

#. TRANSLATORS: Name of Boolean false value
#: ../src/propgrid/propgrid.cpp:209
msgid "False"
msgstr "Yanlış"

#. TRANSLATORS: Label of font family
#: ../src/propgrid/advprops.cpp:694
msgid "Family"
msgstr "Aile"

#: ../src/common/stockitem.cpp:157
msgid "File"
msgstr "Dosya"

#: ../src/common/docview.cpp:669
#, c-format
msgid "File \"%s\" could not be opened for reading."
msgstr "\"%s\" dosyası okunmak üzere açılamadı."

#: ../src/common/docview.cpp:646
#, c-format
msgid "File \"%s\" could not be opened for writing."
msgstr "\"%s\" dosyası yazılmak üzere açılamadı."

#: ../src/generic/filedlgg.cpp:346 ../src/gtk/filedlg.cpp:57
#, c-format
msgid "File '%s' already exists, do you really want to overwrite it?"
msgstr "'%s' dosyası zaten var, üzerine yazılsın mı?"

#: ../src/common/filefn.cpp:1156
#, c-format
msgid "File '%s' couldn't be removed"
msgstr "'%s' dosyası silinemedi"

#: ../src/common/filefn.cpp:1139
#, c-format
msgid "File '%s' couldn't be renamed '%s'"
msgstr "'%s' dosyası '%s' olarak yeniden adlandırılamadı"

#: ../src/richtext/richtextctrl.cpp:3081 ../src/common/textcmn.cpp:953
msgid "File couldn't be loaded."
msgstr "Dosya yüklenemedi."

#: ../src/msw/filedlg.cpp:393
#, c-format
msgid "File dialog failed with error code %0lx."
msgstr "Dosya diyaloğu %0lx hata koduyla sonlandı."

#: ../src/common/docview.cpp:1789
msgid "File error"
msgstr "Dosya hatası"

#: ../src/generic/dirctrlg.cpp:588 ../src/generic/filectrlg.cpp:770
msgid "File name exists already."
msgstr "Aynı adlı bir dosya zaten var."

#: ../src/motif/filedlg.cpp:220
msgid "Files"
msgstr "Dosyalar"

#: ../src/common/filefn.cpp:1591
#, c-format
msgid "Files (%s)"
msgstr "Dosyalar (%s)"

#: ../src/motif/filedlg.cpp:218
msgid "Filter"
msgstr "Süzgeç"

#: ../src/common/stockitem.cpp:159
msgid "First"
msgstr "İlk"

#: ../src/common/prntbase.cpp:1548
msgid "First page"
msgstr "İlk sayfa"

#: ../src/richtext/richtextsizepage.cpp:521
msgid "Fixed"
msgstr "Sabit"

#: ../src/html/helpwnd.cpp:1206
msgid "Fixed font:"
msgstr "Sabit yazı türü:"

#: ../src/html/helpwnd.cpp:1269
msgid "Fixed size face.<br> <b>bold</b> <i>italic</i> "
msgstr "Sabit boyutlu tür.<br> <b>koyu</b> <i>eğik</i> "

#: ../src/richtext/richtextsizepage.cpp:229
msgid "Floating"
msgstr "Yüzen"

#: ../src/common/stockitem.cpp:160
msgid "Floppy"
msgstr "Esnek"

#: ../src/common/paper.cpp:111
msgid "Folio, 8 1/2 x 13 in"
msgstr "Kitap yaprağı, 8 1/2 x 13 inç"

#: ../src/richtext/richtextfontpage.cpp:221
msgid "Font &weight:"
msgstr "Yazı &koyuluğu:"

#: ../src/html/helpwnd.cpp:1207
msgid "Font size:"
msgstr "Yazı boyutu"

#: ../src/richtext/richtextfontpage.cpp:208
msgid "Font st&yle:"
msgstr "Yazı &biçemi:"

#: ../src/osx/carbon/fontdlg.cpp:329
msgid "Font:"
msgstr "Yazı türü:"

#: ../src/dfb/fontmgr.cpp:198
#, c-format
msgid "Fonts index file %s disappeared while loading fonts."
msgstr "Yazı türleri yüklenirken %s yazı türü dizin dosyası kayboldu."

#: ../src/unix/utilsunx.cpp:645
msgid "Fork failed"
msgstr "Ayrıştırma başarısız"

#: ../src/common/stockitem.cpp:161
msgid "Forward"
msgstr "İleri"

#: ../src/common/xtixml.cpp:235
msgid "Forward hrefs are not supported"
msgstr "Yönlendirme href biçimi desteklenmiyor"

#: ../src/html/helpwnd.cpp:875
#, c-format
msgid "Found %i matches"
msgstr "%i sonuç bulundu"

#: ../src/generic/prntdlgg.cpp:238
msgid "From:"
msgstr "Kaynak:"

#: ../src/propgrid/advprops.cpp:1604
msgid "Fuchsia"
msgstr "Fuşya"

#: ../src/common/imaggif.cpp:138
msgid "GIF: data stream seems to be truncated."
msgstr "GIF: veri akışı budanmış görünüyor."

#: ../src/common/imaggif.cpp:128
msgid "GIF: error in GIF image format."
msgstr "GIF: GIF görsel biçimi hatası."

#: ../src/common/imaggif.cpp:133
msgid "GIF: not enough memory."
msgstr "GIF: bellek yetersiz."

#: ../src/gtk/window.cpp:4631
msgid ""
"GTK+ installed on this machine is too old to support screen compositing, "
"please install GTK+ 2.12 or later."
msgstr ""
"Yüklü GTK+ çok eski ve ekran karmayı desteklemiyor. Lütfen GTK+ 2.12 ya da "
"üzeri bir sürüm yükleyin."

#: ../src/univ/themes/gtk.cpp:525
msgid "GTK+ theme"
msgstr "GTK+ teması"

#: ../src/common/prntbase.cpp:258
msgid "Generic PostScript"
msgstr "Genel PostScript"

#: ../src/common/paper.cpp:135
msgid "German Legal Fanfold, 8 1/2 x 13 in"
msgstr "Alman Legal Fanfold, 8 1/2 x 13 inç"

#: ../src/common/paper.cpp:134
msgid "German Std Fanfold, 8 1/2 x 12 in"
msgstr "Alman Standart Fanfold, 8 1/2 x 12 inç"

#: ../include/wx/xtiprop.h:184
msgid "GetProperty called w/o valid getter"
msgstr "'GetProperty' işlevi geçerli bir alıcı olmaksızın çağrıldı"

#: ../include/wx/xtiprop.h:262
msgid "GetPropertyCollection called on a generic accessor"
msgstr "'GetPropertyCollection' işlevi genel bir erişici üzerinden çağrıldı"

#: ../include/wx/xtiprop.h:202
msgid "GetPropertyCollection called w/o valid collection getter"
msgstr ""
"'GetPropertyCollection' işlevi geçerli bir koleksiyon alıcısı olmaksızın "
"çağrıldı"

#: ../src/html/helpwnd.cpp:660
msgid "Go back"
msgstr "Geri git"

#: ../src/html/helpwnd.cpp:661
msgid "Go forward"
msgstr "İleri git"

#: ../src/html/helpwnd.cpp:663
msgid "Go one level up in document hierarchy"
msgstr "Belge hiyerarşisinde bir düzey yukarı git"

#: ../src/generic/filedlgg.cpp:208 ../src/generic/dirdlgg.cpp:116
msgid "Go to home directory"
msgstr "Açılış klasörüne git"

#: ../src/generic/filedlgg.cpp:205
msgid "Go to parent directory"
msgstr "Üst klasöre git"

#: ../src/generic/aboutdlgg.cpp:76
msgid "Graphics art by "
msgstr "Grafikleri hazırlayan "

#: ../src/propgrid/advprops.cpp:1599
msgid "Gray"
msgstr "Gri"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:883
msgid "GrayText"
msgstr "GriMetin"

#: ../src/common/fmapbase.cpp:154
msgid "Greek (ISO-8859-7)"
msgstr "Yunanca (ISO-8859-7)"

#: ../src/propgrid/advprops.cpp:1600
msgid "Green"
msgstr "Yeşil"

#: ../src/generic/colrdlgg.cpp:342
msgid "Green:"
msgstr "Yeşil:"

#: ../src/richtext/richtextborderspage.cpp:615
msgid "Groove"
msgstr "Groove"

#: ../src/common/zstream.cpp:158 ../src/common/zstream.cpp:318
msgid "Gzip not supported by this version of zlib"
msgstr "Gzip bu Zlib sürümü tarafından desteklemiyor"

#: ../src/html/helpwnd.cpp:1549
msgid "HTML Help Project (*.hhp)|*.hhp|"
msgstr "HTML Yardım Projesi (*.hhp)|*.hhp|"

#: ../src/html/htmlwin.cpp:681
#, c-format
msgid "HTML anchor %s does not exist."
msgstr "%s HTML çapası bulunamadı."

#: ../src/html/helpwnd.cpp:1547
msgid "HTML files (*.html;*.htm)|*.html;*.htm|"
msgstr "HTML dosyaları (*.html;*.htm)|*.html;*.htm|"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1759
msgid "Hand"
msgstr "El"

#: ../src/common/stockitem.cpp:162
msgid "Harddisk"
msgstr "Sabit disk"

#: ../src/common/fmapbase.cpp:155
msgid "Hebrew (ISO-8859-8)"
msgstr "İbranice (ISO-8859-8)"

#: ../src/html/helpwnd.cpp:1200
msgid "Help Browser Options"
msgstr "Yardım Tarayıcısı Ayarları"

#: ../src/generic/helpext.cpp:454 ../src/generic/helpext.cpp:455
msgid "Help Index"
msgstr "Yardım Dizini"

#: ../src/html/helpwnd.cpp:1531
msgid "Help Printing"
msgstr "Yardım Yazdırma"

#: ../src/html/helpwnd.cpp:801
msgid "Help Topics"
msgstr "Yardım Konuları"

#: ../src/html/helpwnd.cpp:1548
msgid "Help books (*.htb)|*.htb|Help books (*.zip)|*.zip|"
msgstr "Yardım kitapları (*.htb)|*.htb|Yardım kitapları (*.zip)|*.zip|"

#: ../src/generic/helpext.cpp:267
#, c-format
msgid "Help directory \"%s\" not found."
msgstr "\"%s\" yardım klasörü bulunamadı."

#: ../src/generic/helpext.cpp:275
#, c-format
msgid "Help file \"%s\" not found."
msgstr "\"%s\" yardım dosyası bulunamadı."

#: ../src/html/helpctrl.cpp:63
#, c-format
msgid "Help: %s"
msgstr "Yardım: %s"

#: ../src/osx/menu_osx.cpp:577
#, c-format
msgid "Hide %s"
msgstr "%s gizle"

#: ../src/osx/menu_osx.cpp:579
msgid "Hide Others"
msgstr "Diğerlerini Gizle"

#: ../src/generic/infobar.cpp:84
msgid "Hide this notification message."
msgstr "Bu uyarı iletisini gizle."

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:884
msgid "Highlight"
msgstr "Vurgu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:885
msgid "HighlightText"
msgstr "VurguMetni"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:164 ../src/common/accelcmn.cpp:65
msgid "Home"
msgstr "Açılış"

#: ../src/generic/dirctrlg.cpp:524
msgid "Home directory"
msgstr "Açılış klasörü"

#: ../src/richtext/richtextsizepage.cpp:253
#: ../src/richtext/richtextsizepage.cpp:255
msgid "How the object will float relative to the text."
msgstr "Nesnenin metne göre nasıl yüzeceği."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1760
msgid "I-Beam"
msgstr "I-Işını"

#: ../src/common/imagbmp.cpp:1196
msgid "ICO: Error in reading mask DIB."
msgstr "ICO: DIB maskesi okuma sorunu."

#: ../src/common/imagbmp.cpp:1290 ../src/common/imagbmp.cpp:1390
#: ../src/common/imagbmp.cpp:1405 ../src/common/imagbmp.cpp:1416
#: ../src/common/imagbmp.cpp:1430 ../src/common/imagbmp.cpp:1478
#: ../src/common/imagbmp.cpp:1493 ../src/common/imagbmp.cpp:1507
#: ../src/common/imagbmp.cpp:1518
msgid "ICO: Error writing the image file!"
msgstr "ICO: Görsel dosyası yazma sorunu!"

#: ../src/common/imagbmp.cpp:1255
msgid "ICO: Image too tall for an icon."
msgstr "ICO: Görsel simge için çok uzun."

#: ../src/common/imagbmp.cpp:1263
msgid "ICO: Image too wide for an icon."
msgstr "ICO: Görsel simge için çok geniş."

#: ../src/common/imagbmp.cpp:1603
msgid "ICO: Invalid icon index."
msgstr "ICO: Simge dizini geçersiz."

#: ../src/common/imagiff.cpp:758
msgid "IFF: data stream seems to be truncated."
msgstr "IIF: veri akışı budanmış görünüyor."

#: ../src/common/imagiff.cpp:742
msgid "IFF: error in IFF image format."
msgstr "IIF: IFF görsel biçimi hatası."

#: ../src/common/imagiff.cpp:745
msgid "IFF: not enough memory."
msgstr "IIF: yetersiz bellek."

#: ../src/common/imagiff.cpp:748
msgid "IFF: unknown error!!!"
msgstr "IIF: bilinmeyen hata!!!"

#: ../src/common/fmapbase.cpp:197
msgid "ISO-2022-JP"
msgstr "ISO-2022-JP"

#: ../src/html/htmprint.cpp:282
msgid ""
"If possible, try changing the layout parameters to make the printout more "
"narrow."
msgstr ""
"Olabiliyorsa, çıktıyı daraltmak için sayfa ayarlarını değiştirmeyi deneyin."

#: ../src/generic/dbgrptg.cpp:358
msgid ""
"If you have any additional information pertaining to this bug\n"
"report, please enter it here and it will be joined to it:"
msgstr ""
"Bu hata raporuna ekleyeceğiniz bir bilgi varsa,\n"
"lütfen buraya yazın:"

#: ../src/generic/dbgrptg.cpp:324
msgid ""
"If you wish to suppress this debug report completely, please choose the "
"\"Cancel\" button,\n"
"but be warned that it may hinder improving the program, so if\n"
"at all possible please do continue with the report generation.\n"
msgstr ""
"Bu hata raporunu göndermek istemiyorsanız, \"İptal\" düğmesine tıklayın,\n"
"ancak bu rapor, yazılımın geliştirilmesine yardımcı olabilir, \n"
"bu nedenle olanağınız varsa raporu gönderin.\n"

#: ../src/msw/registry.cpp:1405
#, c-format
msgid "Ignoring value \"%s\" of the key \"%s\"."
msgstr "\"%s\" değeri \"%s\" anahtarı için yok sayılıyor."

#: ../src/common/xtistrm.cpp:295
msgid "Illegal Object Class (Non-wxEvtHandler) as Event Source"
msgstr "Olay kaynağı nesne sınıfı geçersiz (Non-wxEvtHandler)"

#: ../src/common/xti.cpp:513
msgid "Illegal Parameter Count for ConstructObject Method"
msgstr "ConstructObject yordamı için parametre sayısı geçersiz"

#: ../src/common/xti.cpp:501
msgid "Illegal Parameter Count for Create Method"
msgstr "Create yordamı için parametre sayısı geçersiz"

#: ../src/generic/dirctrlg.cpp:570 ../src/generic/filectrlg.cpp:756
msgid "Illegal directory name."
msgstr "Klasör adı geçersiz."

#: ../src/generic/filectrlg.cpp:1367
msgid "Illegal file specification."
msgstr "Dosya tanımı geçersiz."

#: ../src/common/image.cpp:2269
msgid "Image and mask have different sizes."
msgstr "Görsel ve maske farklı boyutlarda."

#: ../src/common/image.cpp:2746
#, c-format
msgid "Image file is not of type %d."
msgstr "Görsel dosyası %d türünde değil."

#: ../src/common/image.cpp:2877
#, c-format
msgid "Image is not of type %s."
msgstr "Görsel dosyası %s türünde değil."

#: ../src/msw/textctrl.cpp:488
msgid ""
"Impossible to create a rich edit control, using simple text control instead. "
"Please reinstall riched32.dll"
msgstr ""
"Zengin metin denetimi oluşturulamıyor. Onun yerine basit metin denetimi "
"kullanılacak. Lütfen riched32.dll kitaplığını yeniden yükleyin."

#: ../src/unix/utilsunx.cpp:301
msgid "Impossible to get child process input"
msgstr "Alt iş girdisi alınamıyor"

#: ../src/common/filefn.cpp:1028
#, c-format
msgid "Impossible to get permissions for file '%s'"
msgstr "'%s' dosyasının izinleri okunamıyor"

#: ../src/common/filefn.cpp:1042
#, c-format
msgid "Impossible to overwrite the file '%s'"
msgstr "'%s' dosyasının üzerine yazılamıyor"

#: ../src/common/filefn.cpp:1097
#, c-format
msgid "Impossible to set permissions for the file '%s'"
msgstr "'%s' dosyasının izinleri değiştirilemiyor"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:886
msgid "InactiveBorder"
msgstr "DevredışıKenarlık"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:887
msgid "InactiveCaption"
msgstr "DevredışıBaşlık"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:888
msgid "InactiveCaptionText"
msgstr "DevredışıBaşlıkMetni"

#: ../src/common/gifdecod.cpp:792
#, c-format
msgid "Incorrect GIF frame size (%u, %d) for the frame #%u"
msgstr "GIF kare sayısı yanlış (%u, %d) #%u karesi"

#: ../src/msw/ole/automtn.cpp:635
msgid "Incorrect number of arguments."
msgstr "Argüman sayısı hatalı."

#: ../src/common/stockitem.cpp:165
msgid "Indent"
msgstr "Girinti"

#: ../src/richtext/richtextformatdlg.cpp:349
msgid "Indents && Spacing"
msgstr "Girinti ve Boşluklar"

#: ../src/common/stockitem.cpp:166 ../src/html/helpwnd.cpp:515
msgid "Index"
msgstr "Dizin"

#: ../src/common/fmapbase.cpp:159
msgid "Indian (ISO-8859-12)"
msgstr "Hintçe (ISO-8859-12)"

#: ../src/common/init.cpp:287
msgid "Initialization failed in post init, aborting."
msgstr "Hazırlığın ardından başlatılamadı, vazgeçiliyor."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:54
msgid "Ins"
msgstr "Ins"

#. TRANSLATORS: Name of keyboard key
#: ../src/richtext/richtextsymboldlg.cpp:472 ../src/common/accelcmn.cpp:53
msgid "Insert"
msgstr "Ekle"

#: ../src/richtext/richtextbuffer.cpp:8067
msgid "Insert Field"
msgstr "Alan Ekle"

#: ../src/richtext/richtextbuffer.cpp:7978
#: ../src/richtext/richtextbuffer.cpp:8936
msgid "Insert Image"
msgstr "Görsel Ekle"

#: ../src/richtext/richtextbuffer.cpp:8025
msgid "Insert Object"
msgstr "Nesne Ekle"

#: ../src/richtext/richtextctrl.cpp:1286 ../src/richtext/richtextctrl.cpp:1494
#: ../src/richtext/richtextbuffer.cpp:7822
#: ../src/richtext/richtextbuffer.cpp:7852
#: ../src/richtext/richtextbuffer.cpp:7894
msgid "Insert Text"
msgstr "Metin Ekle"

#: ../src/richtext/richtextindentspage.cpp:295
#: ../src/richtext/richtextindentspage.cpp:297
msgid "Inserts a page break before the paragraph."
msgstr "Paragraftan önce bir sayfa sonu ekler."

#: ../src/richtext/richtextborderspage.cpp:617
msgid "Inset"
msgstr "Gömme"

#: ../src/gtk/app.cpp:425
#, c-format
msgid "Invalid GTK+ command line option, use \"%s --help\""
msgstr "Geçersiz GTK+ komut satırı seçeneği, \"%s --help\" yazarak yardım alın"

#: ../src/common/imagtiff.cpp:311
msgid "Invalid TIFF image index."
msgstr "TIFF görsel dizini geçersiz."

#: ../src/common/appcmn.cpp:273
#, c-format
msgid "Invalid display mode specification '%s'."
msgstr "'%s' görünüm kipi özelliği geçersiz."

#: ../src/x11/app.cpp:127
#, c-format
msgid "Invalid geometry specification '%s'"
msgstr "'%s' geometri özelliği geçersiz."

#: ../src/unix/fswatcher_inotify.cpp:323
#, c-format
msgid "Invalid inotify event for \"%s\""
msgstr "\"%s\" için inotify etkinliği geçersiz."

#: ../src/unix/snglinst.cpp:312
#, c-format
msgid "Invalid lock file '%s'."
msgstr "'%s' kilit dosyası geçersiz."

#: ../src/common/translation.cpp:1125
msgid "Invalid message catalog."
msgstr "İleti kataloğu geçersiz."

#: ../src/common/xtistrm.cpp:405 ../src/common/xtistrm.cpp:420
msgid "Invalid or Null Object ID passed to GetObjectClassInfo"
msgstr "GetObjectClassInfo işlevine geçersiz ya da boş nesne kodu gönderildi"

#: ../src/common/xtistrm.cpp:435
msgid "Invalid or Null Object ID passed to HasObjectClassInfo"
msgstr "HasObjectClassInfo işlevine geçersiz ya da boş nesne kodu gönderildi"

#: ../src/common/regex.cpp:310
#, c-format
msgid "Invalid regular expression '%s': %s"
msgstr "Kurallı ifade geçersiz '%s': %s"

#: ../src/common/config.cpp:226
#, c-format
msgid "Invalid value %ld for a boolean key \"%s\" in config file."
msgstr "Ayar dosyasındaki %ld değeri \"%s\" ikili anahtarı geçersiz."

#: ../src/generic/fontdlgg.cpp:329 ../src/richtext/richtextfontpage.cpp:351
#: ../src/osx/carbon/fontdlg.cpp:361 ../src/common/stockitem.cpp:168
msgid "Italic"
msgstr "Yatık"

#: ../src/common/paper.cpp:130
msgid "Italy Envelope, 110 x 230 mm"
msgstr "İtalyan Zarf, 110 x 230 mm"

#: ../src/common/imagjpeg.cpp:270
msgid "JPEG: Couldn't load - file is probably corrupted."
msgstr "JPEG: Yüklenemedi - dosya bozuk olabilir."

#: ../src/common/imagjpeg.cpp:449
msgid "JPEG: Couldn't save image."
msgstr "JPEG: Görsel kaydedilemedi."

#: ../src/common/paper.cpp:163
msgid "Japanese Double Postcard 200 x 148 mm"
msgstr "Japon Çift Postakartı 200 x 148 mm"

#: ../src/common/paper.cpp:167
msgid "Japanese Envelope Chou #3"
msgstr "Japon Zarf Chou #3"

#: ../src/common/paper.cpp:180
msgid "Japanese Envelope Chou #3 Rotated"
msgstr "Japon Zarf Chou #3 Çevrilmiş"

#: ../src/common/paper.cpp:168
msgid "Japanese Envelope Chou #4"
msgstr "Japon Zarf Chou #4"

#: ../src/common/paper.cpp:181
msgid "Japanese Envelope Chou #4 Rotated"
msgstr "Japon Zarf Chou #4 Çevrilmiş"

#: ../src/common/paper.cpp:165
msgid "Japanese Envelope Kaku #2"
msgstr "Japon Zarf Kaku #2"

#: ../src/common/paper.cpp:178
msgid "Japanese Envelope Kaku #2 Rotated"
msgstr "Japon Zarf Kaku #2 Çevrilmiş"

#: ../src/common/paper.cpp:166
msgid "Japanese Envelope Kaku #3"
msgstr "Japon Zarf Kaku #3"

#: ../src/common/paper.cpp:179
msgid "Japanese Envelope Kaku #3 Rotated"
msgstr "Japon Zarf Kaku #3 Çevrilmiş"

#: ../src/common/paper.cpp:185
msgid "Japanese Envelope You #4"
msgstr "Japon Zarf You #4"

#: ../src/common/paper.cpp:186
msgid "Japanese Envelope You #4 Rotated"
msgstr "Japon Zarf You #4 Çevrilmiş"

#: ../src/common/paper.cpp:138
msgid "Japanese Postcard 100 x 148 mm"
msgstr "Japon Postakartı 100 x 148 mm"

#: ../src/common/paper.cpp:175
msgid "Japanese Postcard Rotated 148 x 100 mm"
msgstr "Japon Postakartı Çevrilmiş 148 x 100 mm"

#: ../src/common/stockitem.cpp:169
msgid "Jump to"
msgstr "Atla"

#: ../src/common/stockitem.cpp:171
msgid "Justified"
msgstr "Hizalanmış"

#: ../src/richtext/richtextindentspage.cpp:155
#: ../src/richtext/richtextindentspage.cpp:157
#: ../src/richtext/richtextliststylepage.cpp:344
#: ../src/richtext/richtextliststylepage.cpp:346
msgid "Justify text left and right."
msgstr "Metin sola ve sağa hizalanır."

#: ../src/common/fmapbase.cpp:163
msgid "KOI8-R"
msgstr "KOI8-R"

#: ../src/common/fmapbase.cpp:164
msgid "KOI8-U"
msgstr "KOI8-U"

#: ../src/common/accelcmn.cpp:265 ../src/common/accelcmn.cpp:347
msgid "KP_"
msgstr "KP_"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "KP_Add"
msgstr "TT_Ekleme"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "KP_Begin"
msgstr "TT_Başlangıç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "KP_Decimal"
msgstr "TT_Ondalık"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "KP_Delete"
msgstr "TT_Del"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "KP_Divide"
msgstr "TT_Bölü"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "KP_Down"
msgstr "TT_Aşağı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:100
msgid "KP_End"
msgstr "TT_End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "KP_Enter"
msgstr "TT_Enter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "KP_Equal"
msgstr "TT_Eşit"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "KP_Home"
msgstr "TT_Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "KP_Insert"
msgstr "TT_Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "KP_Left"
msgstr "TT_Sol"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "KP_Multiply"
msgstr "TT_Çarpı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:99
msgid "KP_Next"
msgstr "TT_Next"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "KP_PageDown"
msgstr "TT_PageDown"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "KP_PageUp"
msgstr "TT_PageUp"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:98
msgid "KP_Prior"
msgstr "TT_Önceki"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "KP_Right"
msgstr "TT_Sağ"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "KP_Separator"
msgstr "TT_Ayıraç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "KP_Space"
msgstr "TT_Boşluk"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "KP_Subtract"
msgstr "TT_Eksi"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "KP_Tab"
msgstr "TT_Sekme"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "KP_Up"
msgstr "TT_Yukarı"

#: ../src/richtext/richtextindentspage.cpp:270
msgid "L&ine spacing:"
msgstr "&Satır aralığı:"

#: ../src/common/stockitem.cpp:174
msgid "Last"
msgstr "Son"

#: ../src/common/prntbase.cpp:1572
msgid "Last page"
msgstr "Son sayfa"

#: ../src/common/log.cpp:305
#, c-format
msgid "Last repeated message (\"%s\", %u time) wasn't output"
msgid_plural "Last repeated message (\"%s\", %u times) wasn't output"
msgstr[0] "Son yinelenen ileti (\"%s\", %u kez) çıkartılmadı"

#: ../src/common/paper.cpp:103
msgid "Ledger, 17 x 11 in"
msgstr "Ledger, 17 x 11 inç"

#: ../src/richtext/richtextindentspage.cpp:204
#: ../src/richtext/richtextliststylepage.cpp:390
msgid "Left (&first line):"
msgstr "Sol (i&lk satır):"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1761
msgid "Left Button"
msgstr "Sol Düğme"

#: ../src/generic/prntdlgg.cpp:880
msgid "Left margin (mm):"
msgstr "Sol kenar boşluğu (mm):"

#: ../src/richtext/richtextindentspage.cpp:141
#: ../src/richtext/richtextindentspage.cpp:143
#: ../src/richtext/richtextliststylepage.cpp:330
#: ../src/richtext/richtextliststylepage.cpp:332
msgid "Left-align text."
msgstr "Metin sola yaslanır."

#: ../src/common/paper.cpp:144
msgid "Legal Extra 9 1/2 x 15 in"
msgstr "Legal Ek 9 1/2 x 15 inç"

#: ../src/common/paper.cpp:96
msgid "Legal, 8 1/2 x 14 in"
msgstr "Legal, 8 1/2 x 14 inç"

#: ../src/common/paper.cpp:143
msgid "Letter Extra 9 1/2 x 12 in"
msgstr "Letter Ek 9 1/2 x 12 inç"

#: ../src/common/paper.cpp:149
msgid "Letter Extra Transverse 9.275 x 12 in"
msgstr "Letter Ek Enine 9.275 x 12 inç"

#: ../src/common/paper.cpp:152
msgid "Letter Plus 8 1/2 x 12.69 in"
msgstr "Letter Artı 8 1/2 x 12.69 inç"

#: ../src/common/paper.cpp:169
msgid "Letter Rotated 11 x 8 1/2 in"
msgstr "Letter Çevrilmiş 11 x 8 1/2 inç"

#: ../src/common/paper.cpp:101
msgid "Letter Small, 8 1/2 x 11 in"
msgstr "Letter Küçük, 8 1/2 x 11 inç"

#: ../src/common/paper.cpp:147
msgid "Letter Transverse 8 1/2 x 11 in"
msgstr "Letter Enine 8 1/2 x 11 inç"

#: ../src/common/paper.cpp:95
msgid "Letter, 8 1/2 x 11 in"
msgstr "Letter, 8 1/2 x 11 inç"

#: ../src/generic/aboutdlgg.cpp:173
msgid "License"
msgstr "Lisans"

#: ../src/generic/fontdlgg.cpp:332
msgid "Light"
msgstr "Açık"

#: ../src/propgrid/advprops.cpp:1608
msgid "Lime"
msgstr "Limon"

#: ../src/generic/helpext.cpp:294
#, c-format
msgid "Line %lu of map file \"%s\" has invalid syntax, skipped."
msgstr ""
"%lu satırında \"%s\" eşleştirme dosyası içinde sözdizimi hatası var, atlandı."

#: ../src/richtext/richtextliststylepage.cpp:444
msgid "Line spacing:"
msgstr "Satır aralığı:"

#: ../src/html/chm.cpp:838
msgid "Link contained '//', converted to absolute link."
msgstr "Bağlantı '//' içeriyor, mutlak bağlantıya dönüştürüldü."

#: ../src/richtext/richtextformatdlg.cpp:364
msgid "List Style"
msgstr "Liste Biçemi"

#: ../src/richtext/richtextstyles.cpp:1064
msgid "List styles"
msgstr "Liste biçemleri"

#: ../src/richtext/richtextfontpage.cpp:197
#: ../src/richtext/richtextfontpage.cpp:199
msgid "Lists font sizes in points."
msgstr "Yazı türü boyutları punto olarak listelenir."

#: ../src/richtext/richtextfontpage.cpp:190
#: ../src/richtext/richtextfontpage.cpp:192
msgid "Lists the available fonts."
msgstr "Kullanılabilir yazı türleri listelenir."

#: ../src/common/fldlgcmn.cpp:340
#, c-format
msgid "Load %s file"
msgstr "%s dosyasını yükle"

#: ../src/html/htmlwin.cpp:597
msgid "Loading : "
msgstr "Yükleniyor : "

#: ../src/unix/snglinst.cpp:246
#, c-format
msgid "Lock file '%s' has incorrect owner."
msgstr "'%s' kilit dosyasının sahibi hatalı."

#: ../src/unix/snglinst.cpp:251
#, c-format
msgid "Lock file '%s' has incorrect permissions."
msgstr "'%s' kilit dosyasının izinleri doğru değil."

#: ../src/generic/logg.cpp:576
#, c-format
msgid "Log saved to the file '%s'."
msgstr "Günlük '%s' dosyasına kaydedildi."

#: ../src/richtext/richtextliststylepage.cpp:484
#: ../src/richtext/richtextbulletspage.cpp:276
msgid "Lower case letters"
msgstr "Küçük harfler"

#: ../src/richtext/richtextliststylepage.cpp:486
#: ../src/richtext/richtextbulletspage.cpp:278
msgid "Lower case roman numerals"
msgstr "Küçük harf Romen rakamları"

#: ../src/gtk/mdi.cpp:422 ../src/gtk1/mdi.cpp:431
msgid "MDI child"
msgstr "MDI alt"

#: ../src/msw/helpchm.cpp:56
msgid ""
"MS HTML Help functions are unavailable because the MS HTML Help library is "
"not installed on this machine. Please install it."
msgstr ""
"MS HTML Yardım kitaplığı yüklü olmadığından yardım işlevleri kullanılamıyor. "
"Lütfen yükleyin."

#: ../src/univ/themes/win32.cpp:3754
msgid "Ma&ximize"
msgstr "Ekranı &kaplat"

#: ../src/common/fmapbase.cpp:203
msgid "MacArabic"
msgstr "MacArapça"

#: ../src/common/fmapbase.cpp:222
msgid "MacArmenian"
msgstr "MacErmenice"

#: ../src/common/fmapbase.cpp:211
msgid "MacBengali"
msgstr "MacBengalce"

#: ../src/common/fmapbase.cpp:217
msgid "MacBurmese"
msgstr "MacBurmese"

#: ../src/common/fmapbase.cpp:236
msgid "MacCeltic"
msgstr "MacKeltçe"

#: ../src/common/fmapbase.cpp:227
msgid "MacCentralEurRoman"
msgstr "MacOrtaAvrupaRoman"

#: ../src/common/fmapbase.cpp:223
msgid "MacChineseSimp"
msgstr "MacÇinceBasit"

#: ../src/common/fmapbase.cpp:201
msgid "MacChineseTrad"
msgstr "MacÇinceGeleneksel"

#: ../src/common/fmapbase.cpp:233
msgid "MacCroatian"
msgstr "MacHırvatça"

#: ../src/common/fmapbase.cpp:206
msgid "MacCyrillic"
msgstr "MacKiril"

#: ../src/common/fmapbase.cpp:207
msgid "MacDevanagari"
msgstr "MacDevanagari"

#: ../src/common/fmapbase.cpp:231
msgid "MacDingbats"
msgstr "MacDingbats"

#: ../src/common/fmapbase.cpp:226
msgid "MacEthiopic"
msgstr "MacEtyopça"

#: ../src/common/fmapbase.cpp:229
msgid "MacExtArabic"
msgstr "MacExtArapça"

#: ../src/common/fmapbase.cpp:237
msgid "MacGaelic"
msgstr "MacGaliçce"

#: ../src/common/fmapbase.cpp:221
msgid "MacGeorgian"
msgstr "MacAzerice"

#: ../src/common/fmapbase.cpp:205
msgid "MacGreek"
msgstr "MacYunanca"

#: ../src/common/fmapbase.cpp:209
msgid "MacGujarati"
msgstr "MacGujarati"

#: ../src/common/fmapbase.cpp:208
msgid "MacGurmukhi"
msgstr "MacGurmukhi"

#: ../src/common/fmapbase.cpp:204
msgid "MacHebrew"
msgstr "Macİbranice"

#: ../src/common/fmapbase.cpp:234
msgid "MacIcelandic"
msgstr "MacIzlandaca"

#: ../src/common/fmapbase.cpp:200
msgid "MacJapanese"
msgstr "MacJaponca"

#: ../src/common/fmapbase.cpp:214
msgid "MacKannada"
msgstr "MacKanada"

#: ../src/common/fmapbase.cpp:238
msgid "MacKeyboardGlyphs"
msgstr "MacKeyboardGlyphs"

#: ../src/common/fmapbase.cpp:218
msgid "MacKhmer"
msgstr "MacKmerce"

#: ../src/common/fmapbase.cpp:202
msgid "MacKorean"
msgstr "MacKorece"

#: ../src/common/fmapbase.cpp:220
msgid "MacLaotian"
msgstr "MacLaotian"

#: ../src/common/fmapbase.cpp:215
msgid "MacMalayalam"
msgstr "MacMalayca"

#: ../src/common/fmapbase.cpp:225
msgid "MacMongolian"
msgstr "MacMongolca"

#: ../src/common/fmapbase.cpp:210
msgid "MacOriya"
msgstr "MacOriya"

#: ../src/common/fmapbase.cpp:199
msgid "MacRoman"
msgstr "MacRoman"

#: ../src/common/fmapbase.cpp:235
msgid "MacRomanian"
msgstr "MacRomence"

#: ../src/common/fmapbase.cpp:216
msgid "MacSinhalese"
msgstr "MacSinhalese"

#: ../src/common/fmapbase.cpp:230
msgid "MacSymbol"
msgstr "MacSimge"

#: ../src/common/fmapbase.cpp:212
msgid "MacTamil"
msgstr "MacTamil"

#: ../src/common/fmapbase.cpp:213
msgid "MacTelugu"
msgstr "MacTelugu"

#: ../src/common/fmapbase.cpp:219
msgid "MacThai"
msgstr "MacTay"

#: ../src/common/fmapbase.cpp:224
msgid "MacTibetan"
msgstr "MacTibetçe"

#: ../src/common/fmapbase.cpp:232
msgid "MacTurkish"
msgstr "MacTürkçe"

#: ../src/common/fmapbase.cpp:228
msgid "MacVietnamese"
msgstr "MacVietnamca"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1762
msgid "Magnifier"
msgstr "Büyüteç"

#: ../src/propgrid/advprops.cpp:2143
msgid "Make a selection:"
msgstr "Bir seçim yapın:"

#: ../src/richtext/richtextformatdlg.cpp:374
#: ../src/richtext/richtextmarginspage.cpp:171
msgid "Margins"
msgstr "Kenar Boşlukları"

#: ../src/propgrid/advprops.cpp:1595
msgid "Maroon"
msgstr "Kestane"

#: ../src/generic/fdrepdlg.cpp:147
msgid "Match case"
msgstr "Küçük büyük harf eşleştirilsin"

#: ../src/richtext/richtextsizepage.cpp:463
msgid "Max height:"
msgstr "En fazla yükseklik:"

#: ../src/richtext/richtextsizepage.cpp:436
msgid "Max width:"
msgstr "En fazla genişlik:"

#: ../src/unix/mediactrl.cpp:947
#, c-format
msgid "Media playback error: %s"
msgstr "Ortam oynatma hatası: %s"

#: ../src/common/fs_mem.cpp:175
#, c-format
msgid "Memory VFS already contains file '%s'!"
msgstr "'%s' dosyası zaten VFS belleğinde yer alıyor!"

#. TRANSLATORS: Name of keyboard key
#. TRANSLATORS: Keyword of system colour
#: ../src/common/accelcmn.cpp:73 ../src/propgrid/advprops.cpp:889
msgid "Menu"
msgstr "Menü"

#: ../src/univ/themes/metal.cpp:168
msgid "Metal theme"
msgstr "Metal tema"

#: ../src/msw/ole/automtn.cpp:652
msgid "Method or property not found."
msgstr "Yordam ya da özellik bulunamadı."

#: ../src/univ/themes/win32.cpp:3752
msgid "Mi&nimize"
msgstr "Simge &durumuna küçült"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1763
msgid "Middle Button"
msgstr "Orta Düğme"

#: ../src/richtext/richtextsizepage.cpp:409
msgid "Min height:"
msgstr "En az yükseklik:"

#: ../src/richtext/richtextsizepage.cpp:382
msgid "Min width:"
msgstr "En az genişlik:"

#: ../src/msw/ole/automtn.cpp:668
msgid "Missing a required parameter."
msgstr "Gereken bir parametre eksik."

#: ../src/generic/fontdlgg.cpp:324
msgid "Modern"
msgstr "Modern"

#: ../src/common/module.cpp:133
#, c-format
msgid "Module \"%s\" initialization failed"
msgstr "\"%s\" modülü başlatılamadı"

#: ../src/common/paper.cpp:131
msgid "Monarch Envelope, 3 7/8 x 7 1/2 in"
msgstr "Monarşi Zarf, 3 7/8 x 7 1/2 inç"

#: ../src/msw/fswatcher.cpp:143
msgid "Monitoring individual files for changes is not supported currently."
msgstr "Tek tek dosyaların değişiminin izlenmesi şu anda desteklenmiyor."

#: ../src/generic/editlbox.cpp:172
msgid "Move down"
msgstr "Aşağı taşı"

#: ../src/generic/editlbox.cpp:171
msgid "Move up"
msgstr "Yukarı taşı"

#: ../src/richtext/richtextsizepage.cpp:682
#: ../src/richtext/richtextsizepage.cpp:684
msgid "Moves the object to the next paragraph."
msgstr "Nesneyi sonraki paragrafa taşır."

#: ../src/richtext/richtextsizepage.cpp:676
#: ../src/richtext/richtextsizepage.cpp:678
msgid "Moves the object to the previous paragraph."
msgstr "Nesneyi önceki paragrafa taşır."

#: ../src/richtext/richtextbuffer.cpp:9966
msgid "Multiple Cell Properties"
msgstr "Çoklu Hücre Özellikleri"

#: ../src/propgrid/advprops.cpp:1596
msgid "Navy"
msgstr "Lacivert"

#: ../src/common/stockitem.cpp:175
msgid "Network"
msgstr "Ağ"

#: ../src/common/stockitem.cpp:176
msgid "New"
msgstr "Yeni"

#: ../src/richtext/richtextstyledlg.cpp:243
msgid "New &Box Style..."
msgstr "Yeni &Kutu Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:225
msgid "New &Character Style..."
msgstr "Yeni &Karakter Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:237
msgid "New &List Style..."
msgstr "Yeni &Liste Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:231
msgid "New &Paragraph Style..."
msgstr "Yeni &Paragraf Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:606
#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:654
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:820
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:893
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:934
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "New Style"
msgstr "Yeni Biçem"

#: ../src/generic/editlbox.cpp:169
msgid "New item"
msgstr "Yeni öge"

#: ../src/generic/dirdlgg.cpp:297 ../src/generic/dirdlgg.cpp:307
#: ../src/generic/filectrlg.cpp:618 ../src/generic/filectrlg.cpp:627
msgid "NewName"
msgstr "YeniAd"

#: ../src/common/prntbase.cpp:1567 ../src/html/helpwnd.cpp:665
msgid "Next page"
msgstr "Sonraki sayfa"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1764
msgid "No Entry"
msgstr "Kayıt Yok"

#: ../src/generic/animateg.cpp:150
#, c-format
msgid "No animation handler for type %ld defined."
msgstr "%ld türü için canlandırma işleyicisi tanımlanmamış."

#: ../src/dfb/bitmap.cpp:642 ../src/dfb/bitmap.cpp:676
#, c-format
msgid "No bitmap handler for type %d defined."
msgstr "%d türü için bit eşlemi işleyicisi tanımlanmamış."

#: ../src/common/utilscmn.cpp:1077
msgid "No default application configured for HTML files."
msgstr "HTML dosyaları için varsayılan uygulama ayarlanmamış."

#: ../src/generic/helpext.cpp:445
msgid "No entries found."
msgstr "Hiç bir kayıt bulunamadı."

#: ../src/common/fontmap.cpp:421
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found,\n"
"but an alternative encoding '%s' is available.\n"
"Do you want to use this encoding (otherwise you will have to choose another "
"one)?"
msgstr ""
"Metni '%s' kodlamasıyla görüntüleyecek bir yazı türü yok,\n"
"ancak onun yerine '%s' kodlama seçeneği kullanılabilir.\n"
"Bu kodlamayı kullanmak istiyor musunuz (aksi halde başka bir tane "
"seçmelisiniz) ?"

#: ../src/common/fontmap.cpp:426
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found.\n"
"Would you like to select a font to be used for this encoding\n"
"(otherwise the text in this encoding will not be shown correctly)?"
msgstr ""
"Metni '%s' kodlamasıyla görüntüleyecek bir yazı türü yok.\n"
"Bu kodlamayı kullanabileceğiniz bir yazı türü seçmek istiyor musunuz\n"
"(aksi halde bu kodlamadaki metin doğru olarak görüntülenmez) ?"

#: ../src/generic/animateg.cpp:142
msgid "No handler found for animation type."
msgstr "Canlandırma türünün işleyicisi bulunamadı."

#: ../src/common/image.cpp:2728
msgid "No handler found for image type."
msgstr "Görüntü türünün işleyicisi bulunamadı."

#: ../src/common/image.cpp:2736 ../src/common/image.cpp:2848
#: ../src/common/image.cpp:2901
#, c-format
msgid "No image handler for type %d defined."
msgstr "%d türünün görüntü işleyicisi tanımlanmamış."

#: ../src/common/image.cpp:2871 ../src/common/image.cpp:2915
#, c-format
msgid "No image handler for type %s defined."
msgstr "%s türünün görüntü işleyicisi tanımlanmamış."

#: ../src/html/helpwnd.cpp:858
msgid "No matching page found yet"
msgstr "Henüz uyan bir sayfa bulunamadı"

#: ../src/unix/sound.cpp:81
msgid "No sound"
msgstr "Ses yok"

#: ../src/common/image.cpp:2277 ../src/common/image.cpp:2318
msgid "No unused colour in image being masked."
msgstr "Maskelenen görselde kullanılmamış renk yok."

#: ../src/common/image.cpp:3374
msgid "No unused colour in image."
msgstr "Görselde kullanılmamış renk yok."

#: ../src/generic/helpext.cpp:302
#, c-format
msgid "No valid mappings found in the file \"%s\"."
msgstr "\"%s\" dosyasında geçerli eşleme bulunamadı."

#: ../src/common/fmapbase.cpp:157
msgid "Nordic (ISO-8859-10)"
msgstr "Norveçce (ISO-8859-10)"

#: ../src/html/helpwnd.cpp:1263
msgid "Normal face<br>and <u>underlined</u>. "
msgstr "Normal yazı türü <br>ve <u>altı çizili</u>. "

#: ../src/html/helpwnd.cpp:1205
msgid "Normal font:"
msgstr "Normal yazı türü:"

#: ../src/propgrid/props.cpp:1128
#, c-format
msgid "Not %s"
msgstr "%s değil"

#: ../include/wx/filename.h:573 ../include/wx/filename.h:578
msgid "Not available"
msgstr "Kullanılamıyor"

#: ../src/richtext/richtextfontpage.cpp:358
msgid "Not underlined"
msgstr "Altı çizili değil"

#: ../src/common/paper.cpp:115
msgid "Note, 8 1/2 x 11 in"
msgstr "Not, 8 1/2 x 11 inç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "Num *"
msgstr "Num *"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "Num +"
msgstr "Num +"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "Num ,"
msgstr "Num ,"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "Num -"
msgstr "Num -"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "Num ."
msgstr "Num ."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "Num /"
msgstr "Num /"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "Num ="
msgstr "Num ="

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "Num Begin"
msgstr "Num Başlangıç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "Num Delete"
msgstr "Num Delete"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "Num Down"
msgstr "Num Aşağı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:100
msgid "Num End"
msgstr "Num Son"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "Num Enter"
msgstr "Num Enter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "Num Home"
msgstr "Num Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "Num Insert"
msgstr "Num Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:86
msgid "Num Lock"
msgstr "Num Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "Num Page Down"
msgstr "Num Page Down"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "Num Page Up"
msgstr "Num Page Up"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "Num Right"
msgstr "Num Sağ"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "Num Space"
msgstr "Num Boşluk"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "Num Tab"
msgstr "Num Sekme"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "Num Up"
msgstr "Num Yukarı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "Num left"
msgstr "Num sol"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:86
msgid "Num_lock"
msgstr "Num_lock"

#: ../src/richtext/richtextliststylepage.cpp:487
#: ../src/richtext/richtextbulletspage.cpp:279
msgid "Numbered outline"
msgstr "Numaralı taslak"

#: ../src/msw/ole/automtn.cpp:692
#, c-format
msgid "OLE Automation error in %s: %s"
msgstr "%s içinde OLE otomasyon hatası: %s"

#: ../include/wx/richtext/richtextimagedlg.h:37
msgid "Object Properties"
msgstr "Nesne Özellikleri"

#: ../src/msw/ole/automtn.cpp:660
msgid "Object implementation does not support named arguments."
msgstr "Nesne uygulaması adlandırılmış argümanları desteklemiyor."

#: ../src/common/xtixml.cpp:264
msgid "Objects must have an id attribute"
msgstr "Nesnelerin bir kod özniteliği olmalıdır"

#: ../src/propgrid/advprops.cpp:1601
msgid "Olive"
msgstr "Zeytin"

#: ../src/richtext/richtextbackgroundpage.cpp:325
msgid "Opaci&ty:"
msgstr "&Matlık:"

#: ../src/generic/colrdlgg.cpp:354
msgid "Opacity:"
msgstr "Matlık:"

#: ../src/common/docview.cpp:1773 ../src/common/docview.cpp:1815
msgid "Open File"
msgstr "Dosya Aç"

#: ../src/html/helpwnd.cpp:671 ../src/html/helpwnd.cpp:1554
msgid "Open HTML document"
msgstr "HTML belgesi aç"

#: ../src/generic/dbgrptg.cpp:163
#, c-format
msgid "Open file \"%s\""
msgstr "Dosya aç \"%s\""

#: ../src/common/stockitem.cpp:179
msgid "Open..."
msgstr "Aç..."

#: ../src/unix/glx11.cpp:506 ../src/msw/glcanvas.cpp:592
msgid "OpenGL 3.0 or later is not supported by the OpenGL driver."
msgstr ""
"OpenGL 3.0 ve üzerindeki sürümler OpenGL sürücüsü tarafından desteklenmiyor."

#: ../src/generic/dirctrlg.cpp:599 ../src/generic/dirdlgg.cpp:323
#: ../src/generic/filectrlg.cpp:642 ../src/generic/filectrlg.cpp:786
msgid "Operation not permitted."
msgstr "İşleme izin verilmiyor."

#: ../src/common/cmdline.cpp:900
#, c-format
msgid "Option '%s' can't be negated"
msgstr "'%s' seçeneği yok sayılamaz"

#: ../src/common/cmdline.cpp:1064
#, c-format
msgid "Option '%s' requires a value."
msgstr "'%s' seçeneğinin bir değeri olması gerekiyor."

#: ../src/common/cmdline.cpp:1147
#, c-format
msgid "Option '%s': '%s' cannot be converted to a date."
msgstr "'%s' seçeneği: '%s' tarihe dönüştürülemiyor."

#: ../src/generic/prntdlgg.cpp:618
msgid "Options"
msgstr "Ayarlar"

#: ../src/propgrid/advprops.cpp:1606
msgid "Orange"
msgstr "Turuncu"

#: ../src/generic/prntdlgg.cpp:615 ../src/generic/prntdlgg.cpp:869
msgid "Orientation"
msgstr "Yön"

#: ../src/common/windowid.cpp:242
msgid "Out of window IDs.  Recommend shutting down application."
msgstr "Pencere kodları tükendi. Uygulamayı kapatmanız önerilir."

#: ../src/richtext/richtextborderspage.cpp:398
#: ../src/richtext/richtextborderspage.cpp:556
msgid "Outline"
msgstr "Taslak"

#: ../src/richtext/richtextborderspage.cpp:618
msgid "Outset"
msgstr "Kabartma"

#: ../src/msw/ole/automtn.cpp:656
msgid "Overflow while coercing argument values."
msgstr "Arguman değerleri zorlanırken taşma oldu."

#: ../src/common/imagpcx.cpp:457 ../src/common/imagpcx.cpp:480
msgid "PCX: couldn't allocate memory"
msgstr "PCX: bellek ayrılamadı"

#: ../src/common/imagpcx.cpp:456
msgid "PCX: image format unsupported"
msgstr "PCX: görsel biçimi desteklenmiyor"

#: ../src/common/imagpcx.cpp:479
msgid "PCX: invalid image"
msgstr "PCX: görsel geçersiz"

#: ../src/common/imagpcx.cpp:442
msgid "PCX: this is not a PCX file."
msgstr "PCX: bu bir PCX dosyası değil."

#: ../src/common/imagpcx.cpp:459 ../src/common/imagpcx.cpp:481
msgid "PCX: unknown error !!!"
msgstr "PCX: bilinmeyen hata !!!"

#: ../src/common/imagpcx.cpp:458
msgid "PCX: version number too low"
msgstr "PCX: sürüm numarası çok küçük"

#: ../src/common/imagpnm.cpp:91
msgid "PNM: Couldn't allocate memory."
msgstr "PNM: Bellek ayrılamadı."

#: ../src/common/imagpnm.cpp:73
msgid "PNM: File format is not recognized."
msgstr "PNM: Dosya biçimi tanınamadı."

#: ../src/common/imagpnm.cpp:112 ../src/common/imagpnm.cpp:134
#: ../src/common/imagpnm.cpp:156
msgid "PNM: File seems truncated."
msgstr "PNM: Dosya budanmış görünüyor."

#: ../src/common/paper.cpp:187
msgid "PRC 16K 146 x 215 mm"
msgstr "PRC 16K 146 x 215 mm"

#: ../src/common/paper.cpp:200
msgid "PRC 16K Rotated"
msgstr "PRC 16K Çevrilmiş"

#: ../src/common/paper.cpp:188
msgid "PRC 32K 97 x 151 mm"
msgstr "PRC 32K 97 x 151 mm"

#: ../src/common/paper.cpp:201
msgid "PRC 32K Rotated"
msgstr "PRC 32K Çevrilmiş"

#: ../src/common/paper.cpp:189
msgid "PRC 32K(Big) 97 x 151 mm"
msgstr "PRC 32K(Büyük) 97 x 151 mm"

#: ../src/common/paper.cpp:202
msgid "PRC 32K(Big) Rotated"
msgstr "PRC 32K(Büyük) Çevrilmiş"

#: ../src/common/paper.cpp:190
msgid "PRC Envelope #1 102 x 165 mm"
msgstr "PRC Zarf #1 102 x 165 mm"

#: ../src/common/paper.cpp:203
msgid "PRC Envelope #1 Rotated 165 x 102 mm"
msgstr "PRC Zarf #1 Çevrilmiş 165 x 102 mm"

#: ../src/common/paper.cpp:199
msgid "PRC Envelope #10 324 x 458 mm"
msgstr "PRC Zarf #10 324 x 458 mm"

#: ../src/common/paper.cpp:212
msgid "PRC Envelope #10 Rotated 458 x 324 mm"
msgstr "PRC Zarf #10 Çevrilmiş 458 x 324 mm"

#: ../src/common/paper.cpp:191
msgid "PRC Envelope #2 102 x 176 mm"
msgstr "PRC Zarf #2 102 x 176 mm"

#: ../src/common/paper.cpp:204
msgid "PRC Envelope #2 Rotated 176 x 102 mm"
msgstr "PRC Zarf #2 Çevrilmiş 176 x 102 mm"

#: ../src/common/paper.cpp:192
msgid "PRC Envelope #3 125 x 176 mm"
msgstr "PRC Zarf #3 125 x 176 mm"

#: ../src/common/paper.cpp:205
msgid "PRC Envelope #3 Rotated 176 x 125 mm"
msgstr "PRC Zarf #3 Çevrilmiş 176 x 125 mm"

#: ../src/common/paper.cpp:193
msgid "PRC Envelope #4 110 x 208 mm"
msgstr "PRC Zarf #4 110 x 208 mm"

#: ../src/common/paper.cpp:206
msgid "PRC Envelope #4 Rotated 208 x 110 mm"
msgstr "PRC Zarf #4 Çevrilmiş 208 x 110 mm"

#: ../src/common/paper.cpp:194
msgid "PRC Envelope #5 110 x 220 mm"
msgstr "PRC Zarf #5 110 x 220 mm"

#: ../src/common/paper.cpp:207
msgid "PRC Envelope #5 Rotated 220 x 110 mm"
msgstr "PRC Zarf #5 Çevrilmiş 220 x 110 mm"

#: ../src/common/paper.cpp:195
msgid "PRC Envelope #6 120 x 230 mm"
msgstr "PRC Zarf #6 120 x 230 mm"

#: ../src/common/paper.cpp:208
msgid "PRC Envelope #6 Rotated 230 x 120 mm"
msgstr "PRC Zarf #6 Çevrilmiş 230 x 120 mm"

#: ../src/common/paper.cpp:196
msgid "PRC Envelope #7 160 x 230 mm"
msgstr "PRC Zarf #7 160 x 230 mm"

#: ../src/common/paper.cpp:209
msgid "PRC Envelope #7 Rotated 230 x 160 mm"
msgstr "PRC Zarf #7 Çevrilmiş 230 x 160 mm"

#: ../src/common/paper.cpp:197
msgid "PRC Envelope #8 120 x 309 mm"
msgstr "PRC Zarf #8 120 x 309 mm"

#: ../src/common/paper.cpp:210
msgid "PRC Envelope #8 Rotated 309 x 120 mm"
msgstr "PRC Zarf #8 Çevrilmiş 309 x 120 mm"

#: ../src/common/paper.cpp:198
msgid "PRC Envelope #9 229 x 324 mm"
msgstr "PRC Zarf #9 229 x 324 mm"

#: ../src/common/paper.cpp:211
msgid "PRC Envelope #9 Rotated 324 x 229 mm"
msgstr "PRC Zarf #9 Çevrilmiş 324 x 229 mm"

#: ../src/richtext/richtextmarginspage.cpp:285
msgid "Padding"
msgstr "Yastıklama"

#: ../src/common/prntbase.cpp:2074
#, c-format
msgid "Page %d"
msgstr "Sayfa %d"

#: ../src/common/prntbase.cpp:2072
#, c-format
msgid "Page %d of %d"
msgstr "Sayfa %d / %d"

#: ../src/gtk/print.cpp:826
msgid "Page Setup"
msgstr "Sayfa Düzeni"

#: ../src/generic/prntdlgg.cpp:828 ../src/common/prntbase.cpp:484
msgid "Page setup"
msgstr "Sayfa düzeni"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:58
msgid "PageDown"
msgstr "PageDown"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:57
msgid "PageUp"
msgstr "PageUp"

#: ../src/generic/prntdlgg.cpp:216
msgid "Pages"
msgstr "Sayfalar"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1765
msgid "Paint Brush"
msgstr "Boya Fırçası"

#: ../src/generic/prntdlgg.cpp:602 ../src/generic/prntdlgg.cpp:801
#: ../src/generic/prntdlgg.cpp:842 ../src/generic/prntdlgg.cpp:855
#: ../src/generic/prntdlgg.cpp:1052 ../src/generic/prntdlgg.cpp:1057
msgid "Paper size"
msgstr "Kağıt boyutu"

#: ../src/richtext/richtextstyles.cpp:1062
msgid "Paragraph styles"
msgstr "Paragraf biçemleri"

#: ../src/common/xtistrm.cpp:465
msgid "Passing a already registered object to SetObject"
msgstr "SetObject işlevine zaten kayıtlı olan bir nesne gönderildi"

#: ../src/common/xtistrm.cpp:476
msgid "Passing an unknown object to GetObject"
msgstr "GetObject işlevine bilinmeyen bir nesne gönderildi"

#: ../src/common/stockitem.cpp:262
msgid "Paste selection"
msgstr "Seçimi yapıştır"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1766
msgid "Pencil"
msgstr "Kalem"

#: ../src/richtext/richtextliststylepage.cpp:222
#: ../src/richtext/richtextbulletspage.cpp:159
msgid "Peri&od"
msgstr "N&okta"

#: ../src/generic/filectrlg.cpp:430
msgid "Permissions"
msgstr "İzinler"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:60
msgid "PgDn"
msgstr "PgDn"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:59
msgid "PgUp"
msgstr "PgUp"

#: ../src/richtext/richtextbuffer.cpp:12868
msgid "Picture Properties"
msgstr "Görsel Özellikleri"

#: ../include/wx/unix/pipe.h:47
msgid "Pipe creation failed"
msgstr "Boru oluşturulamadı"

#: ../src/gtk1/fontdlg.cpp:74
msgid "Please choose a valid font."
msgstr "Lütfen geçerli bir yazı türü seçin."

#: ../src/generic/filedlgg.cpp:357 ../src/gtk/filedlg.cpp:73
msgid "Please choose an existing file."
msgstr "Lütfen varolan bir dosya seçin."

#: ../src/html/helpwnd.cpp:800
msgid "Please choose the page to display:"
msgstr "Lütfen görüntülenecek sayfayı seçin:"

#: ../src/msw/dialup.cpp:764
msgid "Please choose which ISP do you want to connect to"
msgstr "Lütfen bağlanmak istediğiniz hizmet sağlayıcıyı seçin"

#: ../src/common/headerctrlcmn.cpp:59
msgid "Please select the columns to show and define their order:"
msgstr "Lütfen görüntülenecek sütunları seçin ve sıralarını belirleyin:"

#: ../src/common/prntbase.cpp:538
msgid "Please wait while printing..."
msgstr "Yazdırılıyor, lütfen bekleyin..."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1767
msgid "Point Left"
msgstr "Sola Ok"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1768
msgid "Point Right"
msgstr "Sağa Ok"

#. TRANSLATORS: Label of font point size
#: ../src/propgrid/advprops.cpp:662
msgid "Point Size"
msgstr "Punto Boyutu"

#: ../src/generic/prntdlgg.cpp:298
msgid "PostScript file"
msgstr "PostScript dosyası"

#: ../src/osx/menu_osx.cpp:568
msgid "Preferences..."
msgstr "Ayarlar..."

#: ../src/common/prntbase.cpp:546
msgid "Preparing"
msgstr "Hazırlanıyor"

#: ../src/generic/fontdlgg.cpp:455 ../src/osx/carbon/fontdlg.cpp:390
#: ../src/html/helpwnd.cpp:1222
msgid "Preview:"
msgstr "Önizleme:"

#: ../src/common/prntbase.cpp:1553 ../src/html/helpwnd.cpp:664
msgid "Previous page"
msgstr "Önceki sayfa"

#: ../include/wx/prntbase.h:399 ../src/common/docview.cpp:1268
msgid "Print Preview"
msgstr "Baskı Önizlemesi"

#: ../src/common/prntbase.cpp:2015 ../src/common/prntbase.cpp:2057
#: ../src/common/prntbase.cpp:2065
msgid "Print Preview Failure"
msgstr "Baskı Önizleme Sorunu"

#: ../src/generic/prntdlgg.cpp:224
msgid "Print Range"
msgstr "Yazdırma Aralığı"

#: ../src/generic/prntdlgg.cpp:449
msgid "Print Setup"
msgstr "Yazdırma Ayarları"

#: ../src/generic/prntdlgg.cpp:621
msgid "Print in colour"
msgstr "Renkli yazdır"

#: ../src/common/stockitem.cpp:182
msgid "Print previe&w..."
msgstr "Baskı ö&nizleme..."

#: ../src/common/docview.cpp:1262
msgid "Print preview creation failed."
msgstr "Baskı önizleme oluşturulamadı."

#: ../src/common/stockitem.cpp:182
msgid "Print preview..."
msgstr "Baskı önizleme..."

#: ../src/generic/prntdlgg.cpp:630
msgid "Print spooling"
msgstr "Yazdırma kuyruğu"

#: ../src/html/helpwnd.cpp:675
msgid "Print this page"
msgstr "Bu sayfayı yazdır"

#: ../src/generic/prntdlgg.cpp:185
msgid "Print to File"
msgstr "Dosyaya Yazdır"

#: ../src/common/stockitem.cpp:183
msgid "Print..."
msgstr "Yazdır..."

#: ../src/generic/prntdlgg.cpp:633
msgid "Printer command:"
msgstr "Yazıcı komutu:"

#: ../src/generic/prntdlgg.cpp:180
msgid "Printer options"
msgstr "Yazıcı ayarları"

#: ../src/generic/prntdlgg.cpp:645
msgid "Printer options:"
msgstr "Yazıcı ayarları:"

#: ../src/generic/prntdlgg.cpp:916
msgid "Printer..."
msgstr "Yazıcı..."

#: ../include/wx/richtext/richtextprint.h:163 ../src/common/prntbase.cpp:535
#: ../src/html/htmprint.cpp:277
msgid "Printing"
msgstr "Yazdırılıyor"

#: ../src/common/prntbase.cpp:612
msgid "Printing "
msgstr "Yazdırılıyor "

#: ../src/common/prntbase.cpp:347
msgid "Printing Error"
msgstr "Yazdırma Hatası"

#: ../src/common/prntbase.cpp:565
#, c-format
msgid "Printing page %d"
msgstr "Yazdırılan sayfa %d"

#: ../src/common/prntbase.cpp:570
#, c-format
msgid "Printing page %d of %d"
msgstr "Yazdırılan sayfa %d / %d"

#: ../src/generic/printps.cpp:201
#, c-format
msgid "Printing page %d..."
msgstr "Yazdırılan sayfa %d..."

#: ../src/generic/printps.cpp:161
msgid "Printing..."
msgstr "Yazdırılıyor..."

#: ../include/wx/richtext/richtextprint.h:109 ../include/wx/prntbase.h:267
#: ../src/common/docview.cpp:2132
msgid "Printout"
msgstr "Çıktı"

#: ../src/common/debugrpt.cpp:560
#, c-format
msgid ""
"Processing debug report has failed, leaving the files in \"%s\" directory."
msgstr ""
"Hata ayıklama raporu oluşturulamadı, dosyalar \"%s\" klasöründe bırakıldı."

#: ../src/common/stockitem.cpp:184
msgid "Properties"
msgstr "Özellikler"

#: ../src/propgrid/manager.cpp:237
msgid "Property"
msgstr "Özellik"

#. TRANSLATORS: Caption of message box displaying any property error
#: ../src/propgrid/propgrid.cpp:3185 ../src/propgrid/propgrid.cpp:3318
msgid "Property Error"
msgstr "Özellik Hatası"

#: ../src/propgrid/advprops.cpp:1597
msgid "Purple"
msgstr "Mor"

#: ../src/common/paper.cpp:112
msgid "Quarto, 215 x 275 mm"
msgstr "Quarto, 215 x 275 mm"

#: ../src/generic/logg.cpp:1016
msgid "Question"
msgstr "Soru"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1769
msgid "Question Arrow"
msgstr "Soru Oku"

#: ../src/common/stockitem.cpp:156
msgid "Quit"
msgstr "Çıkış"

#: ../src/common/stockitem.cpp:263
msgid "Quit this program"
msgstr "Bu uygulamayı kapat"

#: ../src/common/accelcmn.cpp:338
msgid "RawCtrl+"
msgstr "HamCtrl+"

#: ../src/common/ffile.cpp:109 ../src/common/ffile.cpp:133
#, c-format
msgid "Read error on file '%s'"
msgstr "'%s' dosyasında okuma sorunu"

#: ../src/common/secretstore.cpp:199
#, c-format
msgid "Reading password for \"%s/%s\" failed: %s."
msgstr "\"%s/%s\" için parola okunamadı: %s."

#: ../src/propgrid/advprops.cpp:1605
msgid "Red"
msgstr "Kırmızı"

#: ../src/generic/colrdlgg.cpp:339
msgid "Red:"
msgstr "Kırmızı:"

#: ../src/common/stockitem.cpp:264
msgid "Redo last action"
msgstr "Son eylemi yeniden yap"

#: ../src/common/stockitem.cpp:186
msgid "Refresh"
msgstr "Yenile"

#: ../src/msw/registry.cpp:626
#, c-format
msgid "Registry key '%s' already exists."
msgstr "'%s' kayıt anahtarı zaten var."

#: ../src/msw/registry.cpp:595
#, c-format
msgid "Registry key '%s' does not exist, cannot rename it."
msgstr "'%s' kayıt anahtarı bulunamadığından yeniden adlandırılamıyor."

#: ../src/msw/registry.cpp:727
#, c-format
msgid ""
"Registry key '%s' is needed for normal system operation,\n"
"deleting it will leave your system in unusable state:\n"
"operation aborted."
msgstr ""
"'%s' kayıt anahtarı normal sistem işlemleri için gerekiyor,\n"
"silinmesi sistemi kararsız bir hale getirir:\n"
"işlem iptal edildi."

#: ../src/msw/registry.cpp:954
#, c-format
msgid "Registry value \"%s\" is not binary (but of type %s)"
msgstr "\"%s\" kayıt anahtarı ikili (ya da %s türünde) değil"

#: ../src/msw/registry.cpp:917
#, c-format
msgid "Registry value \"%s\" is not numeric (but of type %s)"
msgstr "\"%s\" kayıt anahtarı sayısal (ya da %s türünde) değil"

#: ../src/msw/registry.cpp:1003
#, c-format
msgid "Registry value \"%s\" is not text (but of type %s)"
msgstr "\"%s\" kayıt anahtarı metin (ya da %s türünde) değil"

#: ../src/msw/registry.cpp:521
#, c-format
msgid "Registry value '%s' already exists."
msgstr "'%s' kayıt değeri zaten var."

#: ../src/richtext/richtextsizepage.cpp:519
msgid "Relative"
msgstr "Bağıl"

#: ../src/generic/helpext.cpp:458
msgid "Relevant entries:"
msgstr "İlgili kayıtlar:"

#: ../include/wx/generic/progdlgg.h:86
msgid "Remaining time:"
msgstr "Kalan süre:"

#: ../src/richtext/richtextctrl.cpp:1562
msgid "Remove Bullet"
msgstr "Madde İmini Kaldır"

#: ../src/html/helpwnd.cpp:433
msgid "Remove current page from bookmarks"
msgstr "Geçerli sayfayı yer imlerinden sil"

#: ../src/common/rendcmn.cpp:194
#, c-format
msgid "Renderer \"%s\" has incompatible version %d.%d and couldn't be loaded."
msgstr "\"%s\" görüntüleyicisinin %d.%d sürümü uyumsuz olduğundan yüklenemedi."

#: ../src/richtext/richtextbuffer.cpp:4527
msgid "Renumber List"
msgstr "Listeyi Yeniden Numarala"

#: ../src/common/stockitem.cpp:188
msgid "Rep&lace"
msgstr "&Değiştir"

#: ../src/richtext/richtextctrl.cpp:3673 ../src/common/stockitem.cpp:188
msgid "Replace"
msgstr "Değiştir"

#: ../src/generic/fdrepdlg.cpp:182
msgid "Replace &all"
msgstr "&Tümünü değiştir"

#: ../src/common/stockitem.cpp:261
msgid "Replace selection"
msgstr "Seçimi değiştir"

#: ../src/generic/fdrepdlg.cpp:124
msgid "Replace with:"
msgstr "Şununla değiştir:"

#: ../src/common/valtext.cpp:163
msgid "Required information entry is empty."
msgstr "Gereken bilgi kayıdı boş."

#: ../src/common/translation.cpp:1975
#, c-format
msgid "Resource '%s' is not a valid message catalog."
msgstr "'%s' kaynağı geçerli bir ileti kataloğu değil."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:56
msgid "Return"
msgstr "Return"

#: ../src/common/stockitem.cpp:189
msgid "Revert to Saved"
msgstr "Kaydedilmiş Olana Geri Dön"

#: ../src/richtext/richtextborderspage.cpp:616
msgid "Ridge"
msgstr "Sırt"

#: ../src/richtext/richtextfontpage.cpp:313
msgid "Rig&ht-to-left"
msgstr "Sağ&dan sola"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1754
msgid "Right Arrow"
msgstr "Sağ Ok"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1770
msgid "Right Button"
msgstr "Sağ Düğme"

#: ../src/generic/prntdlgg.cpp:892
msgid "Right margin (mm):"
msgstr "Sağ kenar boşluğu (mm):"

#: ../src/richtext/richtextindentspage.cpp:148
#: ../src/richtext/richtextindentspage.cpp:150
#: ../src/richtext/richtextliststylepage.cpp:337
#: ../src/richtext/richtextliststylepage.cpp:339
msgid "Right-align text."
msgstr "Metin sağa yaslanır."

#: ../src/generic/fontdlgg.cpp:322
msgid "Roman"
msgstr "Roman"

#: ../src/generic/datavgen.cpp:5916
#, c-format
msgid "Row %i"
msgstr "Satır %i"

#: ../src/richtext/richtextliststylepage.cpp:299
#: ../src/richtext/richtextbulletspage.cpp:239
msgid "S&tandard bullet name:"
msgstr "S&tandart madde imi adı:"

#: ../src/common/accelcmn.cpp:268 ../src/common/accelcmn.cpp:350
msgid "SPECIAL"
msgstr "SPECIAL"

#: ../src/common/fldlgcmn.cpp:342
#, c-format
msgid "Save %s file"
msgstr "%s dosyasını kaydet"

#: ../src/generic/logg.cpp:512
msgid "Save &As..."
msgstr "&Farklı Kaydet..."

#: ../src/common/docview.cpp:366
msgid "Save As"
msgstr "Farklı Kaydet"

#: ../src/common/stockitem.cpp:191
msgid "Save as"
msgstr "Farklı kaydet"

#: ../src/common/stockitem.cpp:267
msgid "Save current document"
msgstr "Geçerli belgeyi kaydet"

#: ../src/common/stockitem.cpp:268
msgid "Save current document with a different filename"
msgstr "Geçerli belgeyi farklı bir adla kaydet"

#: ../src/generic/logg.cpp:512
msgid "Save log contents to file"
msgstr "Günlük içeriğini dosyaya kaydet"

#: ../src/common/secretstore.cpp:179
#, c-format
msgid "Saving password for \"%s/%s\" failed: %s."
msgstr "\"%s/%s\" için parola kaydedilemedi: %s."

#: ../src/generic/fontdlgg.cpp:325
msgid "Script"
msgstr "Betik"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Scroll Lock"
msgstr "Scroll Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Scroll_lock"
msgstr "Scroll_lock"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:890
msgid "Scrollbar"
msgstr "Kaydırma çubuğu"

#: ../src/html/helpwnd.cpp:537
msgid ""
"Search contents of help book(s) for all occurrences of the text you typed "
"above"
msgstr "Yukarıya yazılan metin yardım kitapları içinde her türlü aranır"

#: ../src/generic/fdrepdlg.cpp:160
msgid "Search direction"
msgstr "Arama yönü"

#: ../src/generic/fdrepdlg.cpp:112
msgid "Search for:"
msgstr "Aranan:"

#: ../src/html/helpwnd.cpp:1052
msgid "Search in all books"
msgstr "Tüm kitaplarda ara"

#: ../src/html/helpwnd.cpp:857
msgid "Searching..."
msgstr "Aranıyor..."

#: ../src/generic/dirctrlg.cpp:446
msgid "Sections"
msgstr "Bölümler"

#: ../src/common/ffile.cpp:238
#, c-format
msgid "Seek error on file '%s'"
msgstr "'%s' dosyasında arama sorunu"

#: ../src/common/ffile.cpp:228
#, c-format
msgid "Seek error on file '%s' (large files not supported by stdio)"
msgstr ""
"'%s' dosyasında arama hatası (büyük dosyalar 'stdio' tarafından "
"desteklenmiyor)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:76
msgid "Select"
msgstr "Seçin"

#: ../src/richtext/richtextctrl.cpp:337 ../src/osx/textctrl_osx.cpp:581
#: ../src/common/stockitem.cpp:192 ../src/msw/textctrl.cpp:2512
msgid "Select &All"
msgstr "&Tümünü Seç"

#: ../src/common/stockitem.cpp:192 ../src/stc/stc_i18n.cpp:21
msgid "Select All"
msgstr "Tümünü Seç"

#: ../src/common/docview.cpp:1895
msgid "Select a document template"
msgstr "Bir belge şablonu seçin"

#: ../src/common/docview.cpp:1969
msgid "Select a document view"
msgstr "Bir belge görünümü seçin"

#: ../src/richtext/richtextfontpage.cpp:226
#: ../src/richtext/richtextfontpage.cpp:228
msgid "Select regular or bold."
msgstr "Normal ya da koyu biçemi seçin."

#: ../src/richtext/richtextfontpage.cpp:213
#: ../src/richtext/richtextfontpage.cpp:215
msgid "Select regular or italic style."
msgstr "Normal ya da yatık biçemi seçin."

#: ../src/richtext/richtextfontpage.cpp:239
#: ../src/richtext/richtextfontpage.cpp:241
msgid "Select underlining or no underlining."
msgstr "Altı çizili ya da normal biçemi seçin."

#: ../src/richtext/richtextliststylepage.cpp:187
#: ../src/richtext/richtextliststylepage.cpp:189
msgid "Selects the list level to edit."
msgstr "Düzenlenecek liste düzeyini seçer."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:82
msgid "Separator"
msgstr "Ayıraç"

#: ../src/common/cmdline.cpp:1083
#, c-format
msgid "Separator expected after the option '%s'."
msgstr "'%s' seçeneğinden sonra ayraç bekleniyor."

#: ../src/osx/menu_osx.cpp:572
msgid "Services"
msgstr "Hizmetler"

#: ../src/richtext/richtextbuffer.cpp:11217
msgid "Set Cell Style"
msgstr "Hücre Biçemini Ayarla"

#: ../include/wx/xtiprop.h:175
msgid "SetProperty called w/o valid setter"
msgstr "'SetProperty' işlevi geçerli bir yerleştirici olmaksızın çağrıldı"

#: ../src/generic/prntdlgg.cpp:188
msgid "Setup..."
msgstr "Kurulum..."

#: ../src/msw/dialup.cpp:544
msgid "Several active dialup connections found, choosing one randomly."
msgstr "Birkaç etkin çevirmeli bağlantı bulundu, rastgele biri seçiliyor."

#: ../src/richtext/richtextbackgroundpage.cpp:271
msgid "Sh&adow spread:"
msgstr "&Gölge yayılması:"

#: ../src/richtext/richtextbackgroundpage.cpp:179
msgid "Shadow"
msgstr "Gölge"

#: ../src/richtext/richtextbackgroundpage.cpp:258
msgid "Shadow c&olour:"
msgstr "Gölge re&ngi:"

#: ../src/common/accelcmn.cpp:335
msgid "Shift+"
msgstr "Shift+"

#: ../src/generic/dirdlgg.cpp:147
msgid "Show &hidden directories"
msgstr "Gizli &klasörleri görüntüle"

#: ../src/generic/filectrlg.cpp:983
msgid "Show &hidden files"
msgstr "Gizli &dosyaları görüntüle"

#: ../src/osx/menu_osx.cpp:580
msgid "Show All"
msgstr "Tümünü Görüntüle"

#: ../src/html/helpwnd.cpp:492
msgid "Show all"
msgstr "Tümünü görüntüle"

#: ../src/html/helpwnd.cpp:503
msgid "Show all items in index"
msgstr "Dizindeki tüm ögeleri görüntüle"

#: ../src/html/helpwnd.cpp:658
msgid "Show/hide navigation panel"
msgstr "Gezinti panosunu görüntüle/gizle"

#: ../src/richtext/richtextsymboldlg.cpp:421
#: ../src/richtext/richtextsymboldlg.cpp:423
msgid "Shows a Unicode subset."
msgstr "Bir Unikod alt kümesini görüntüler."

#: ../src/richtext/richtextliststylepage.cpp:472
#: ../src/richtext/richtextliststylepage.cpp:474
#: ../src/richtext/richtextbulletspage.cpp:263
#: ../src/richtext/richtextbulletspage.cpp:265
msgid "Shows a preview of the bullet settings."
msgstr "Madde imi ayarlarının önizlemesini görüntüler."

#: ../src/richtext/richtextfontpage.cpp:330
#: ../src/richtext/richtextfontpage.cpp:332
msgid "Shows a preview of the font settings."
msgstr "Yazı türü ayarlarının bir önizlemesini görüntüler."

#: ../src/osx/carbon/fontdlg.cpp:394 ../src/osx/carbon/fontdlg.cpp:396
msgid "Shows a preview of the font."
msgstr "Yazı türünün önizlemesini görüntüler."

#: ../src/richtext/richtextindentspage.cpp:303
#: ../src/richtext/richtextindentspage.cpp:305
msgid "Shows a preview of the paragraph settings."
msgstr "Paragraf ayarlarının önizlemesini görüntüler."

#: ../src/generic/fontdlgg.cpp:460 ../src/generic/fontdlgg.cpp:462
msgid "Shows the font preview."
msgstr "Yazı türünün önizlemesini görüntüler."

#: ../src/propgrid/advprops.cpp:1607
msgid "Silver"
msgstr "Gümüş"

#: ../src/univ/themes/mono.cpp:516
msgid "Simple monochrome theme"
msgstr "Basit tek renkli tema"

#: ../src/richtext/richtextindentspage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:449
msgid "Single"
msgstr "Tek"

#: ../src/osx/carbon/fontdlg.cpp:339
msgid "Size:"
msgstr "Boyut:"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1775
msgid "Sizing"
msgstr "Boyutlandırma"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1772
msgid "Sizing N-S"
msgstr "Boyutlandırma K-G"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1771
msgid "Sizing NE-SW"
msgstr "Boyutlandırma KD-GB"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1773
msgid "Sizing NW-SE"
msgstr "Boyutlandırma KB-GD"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1774
msgid "Sizing W-E"
msgstr "Boyutlandırma B-D"

#: ../src/msw/progdlg.cpp:801
msgid "Skip"
msgstr "Atla"

#: ../src/generic/fontdlgg.cpp:330
msgid "Slant"
msgstr "Eğik"

#: ../src/richtext/richtextfontpage.cpp:289
msgid "Small C&apitals"
msgstr "Küçük H&arfler"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:79
msgid "Snapshot"
msgstr "Ekran görüntüsü"

#: ../src/richtext/richtextborderspage.cpp:611
msgid "Solid"
msgstr "Katı"

#: ../src/common/docview.cpp:1791
msgid "Sorry, could not open this file."
msgstr "Maalesef bu dosya açılamıyor."

#: ../src/common/prntbase.cpp:2057 ../src/common/prntbase.cpp:2065
msgid "Sorry, not enough memory to create a preview."
msgstr "Maalesef önizleme oluşturmak için yeterli bellek yok."

#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "Sorry, that name is taken. Please choose another."
msgstr "Maalesef bu ad kullanılmış. Lütfen başka bir ad seçin."

#: ../src/common/docview.cpp:1814
msgid "Sorry, the format for this file is unknown."
msgstr "Maalesef bu dosyanın biçimi bilinmiyor."

#: ../src/unix/sound.cpp:492
msgid "Sound data are in unsupported format."
msgstr "Ses verisi biçimi desteklenmiyor."

#: ../src/unix/sound.cpp:477
#, c-format
msgid "Sound file '%s' is in unsupported format."
msgstr "'%s' ses dosyasının biçimi desteklenmiyor."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:67
msgid "Space"
msgstr "Boşluk"

#: ../src/common/stockitem.cpp:197
msgid "Spell Check"
msgstr "Yazım Denetimi"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1776
msgid "Spraycan"
msgstr "Sprey"

#: ../src/common/paper.cpp:104
msgid "Statement, 5 1/2 x 8 1/2 in"
msgstr "Statement, 5 1/2 x 8 1/2 inç"

#: ../src/richtext/richtextsizepage.cpp:518
#: ../src/richtext/richtextsizepage.cpp:523
msgid "Static"
msgstr "Durağan"

#: ../src/common/stockitem.cpp:198
msgid "Stop"
msgstr "Durdur"

#: ../src/common/stockitem.cpp:199
msgid "Strikethrough"
msgstr "Üstü çizili"

#: ../src/common/colourcmn.cpp:45
#, c-format
msgid "String To Colour : Incorrect colour specification : %s"
msgstr "Dizgeden Renge: Hatalı renk tanımı: %s"

#: ../include/wx/richtext/richtextstyledlg.h:46
msgid "Style Organiser"
msgstr "Biçem Düzenleyici"

#: ../src/osx/carbon/fontdlg.cpp:348
msgid "Style:"
msgstr "Biçem:"

#: ../src/richtext/richtextfontpage.cpp:303
msgid "Subscrip&t"
msgstr "Al&t karakter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:83
msgid "Subtract"
msgstr "Eksi"

#: ../src/richtext/richtextfontpage.cpp:296
msgid "Supe&rscript"
msgstr "Ü&st karakter"

#: ../src/common/paper.cpp:150
msgid "SuperA/SuperA/A4 227 x 356 mm"
msgstr "SuperA/SuperA/A4 227 x 356 mm"

#: ../src/common/paper.cpp:151
msgid "SuperB/SuperB/A3 305 x 487 mm"
msgstr "SuperB/SuperB/A3 305 x 487 mm"

#: ../src/richtext/richtextfontpage.cpp:320
msgid "Suppress hyphe&nation"
msgstr "Heceleme e&ngellensin"

#: ../src/generic/fontdlgg.cpp:326
msgid "Swiss"
msgstr "İsveç"

#: ../src/richtext/richtextliststylepage.cpp:488
#: ../src/richtext/richtextbulletspage.cpp:280
msgid "Symbol"
msgstr "Simge"

#: ../src/richtext/richtextliststylepage.cpp:288
#: ../src/richtext/richtextbulletspage.cpp:227
msgid "Symbol &font:"
msgstr "Simge &yazı türü:"

#: ../include/wx/richtext/richtextsymboldlg.h:47
msgid "Symbols"
msgstr "Simgeler"

#: ../src/common/imagtiff.cpp:369 ../src/common/imagtiff.cpp:382
#: ../src/common/imagtiff.cpp:741
msgid "TIFF: Couldn't allocate memory."
msgstr "TIFF: Bellek ayrılamadı."

#: ../src/common/imagtiff.cpp:301
msgid "TIFF: Error loading image."
msgstr "TIFF: Görsel yükleme sorunu."

#: ../src/common/imagtiff.cpp:468
msgid "TIFF: Error reading image."
msgstr "TIFF: Görsel okuma sorunu."

#: ../src/common/imagtiff.cpp:608
msgid "TIFF: Error saving image."
msgstr "TIFF: Görsel kaydetme sorunu."

#: ../src/common/imagtiff.cpp:846
msgid "TIFF: Error writing image."
msgstr "TIFF: Görsel yazma sorunu."

#: ../src/common/imagtiff.cpp:355
msgid "TIFF: Image size is abnormally big."
msgstr "TIFF: Görsel boyutu anormal büyük."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:68
msgid "Tab"
msgstr "Sekme"

#: ../src/richtext/richtextbuffer.cpp:11498
msgid "Table Properties"
msgstr "Tablo Özellikleri"

#: ../src/common/paper.cpp:145
msgid "Tabloid Extra 11.69 x 18 in"
msgstr "Tabloid Ek 11.69 x 18 inç"

#: ../src/common/paper.cpp:102
msgid "Tabloid, 11 x 17 in"
msgstr "Tabloid, 11 x 17 inç"

#: ../src/richtext/richtextformatdlg.cpp:354
msgid "Tabs"
msgstr "Sekmeler"

#: ../src/propgrid/advprops.cpp:1598
msgid "Teal"
msgstr "Yeşilimsi mavi"

#: ../src/generic/fontdlgg.cpp:327
msgid "Teletype"
msgstr "Teletype"

#: ../src/common/docview.cpp:1896
msgid "Templates"
msgstr "Kalıplar"

#: ../src/common/fmapbase.cpp:158
msgid "Thai (ISO-8859-11)"
msgstr "Thai (ISO-8859-11)"

#: ../src/common/ftp.cpp:619
msgid "The FTP server doesn't support passive mode."
msgstr "FTP sunucusu pasif kipi desteklemiyor."

#: ../src/common/ftp.cpp:605
msgid "The FTP server doesn't support the PORT command."
msgstr "FTP sunucusu PORT komutunu desteklemiyor."

#: ../src/richtext/richtextliststylepage.cpp:215
#: ../src/richtext/richtextliststylepage.cpp:217
#: ../src/richtext/richtextbulletspage.cpp:151
#: ../src/richtext/richtextbulletspage.cpp:153
msgid "The available bullet styles."
msgstr "Kullanılabilecek madde imi biçemleri."

#: ../src/richtext/richtextstyledlg.cpp:202
#: ../src/richtext/richtextstyledlg.cpp:204
msgid "The available styles."
msgstr "Kullanılabilecek biçemler."

#: ../src/richtext/richtextbackgroundpage.cpp:168
#: ../src/richtext/richtextbackgroundpage.cpp:170
msgid "The background colour."
msgstr "Art alan rengi."

#: ../src/richtext/richtextborderspage.cpp:267
#: ../src/richtext/richtextborderspage.cpp:269
#: ../src/richtext/richtextborderspage.cpp:301
#: ../src/richtext/richtextborderspage.cpp:303
#: ../src/richtext/richtextborderspage.cpp:335
#: ../src/richtext/richtextborderspage.cpp:337
#: ../src/richtext/richtextborderspage.cpp:369
#: ../src/richtext/richtextborderspage.cpp:371
#: ../src/richtext/richtextborderspage.cpp:435
#: ../src/richtext/richtextborderspage.cpp:437
#: ../src/richtext/richtextborderspage.cpp:469
#: ../src/richtext/richtextborderspage.cpp:471
#: ../src/richtext/richtextborderspage.cpp:503
#: ../src/richtext/richtextborderspage.cpp:505
#: ../src/richtext/richtextborderspage.cpp:537
#: ../src/richtext/richtextborderspage.cpp:539
msgid "The border line style."
msgstr "Kenarlık çizgisi biçemi."

#: ../src/richtext/richtextmarginspage.cpp:267
#: ../src/richtext/richtextmarginspage.cpp:269
msgid "The bottom margin size."
msgstr "Alt kenar boşluğunun boyutu."

#: ../src/richtext/richtextmarginspage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:383
msgid "The bottom padding size."
msgstr "Alt yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:639
#: ../src/richtext/richtextsizepage.cpp:641
#: ../src/richtext/richtextsizepage.cpp:653
#: ../src/richtext/richtextsizepage.cpp:655
msgid "The bottom position."
msgstr "Alt konum."

#: ../src/richtext/richtextliststylepage.cpp:254
#: ../src/richtext/richtextliststylepage.cpp:256
#: ../src/richtext/richtextliststylepage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:277
#: ../src/richtext/richtextbulletspage.cpp:191
#: ../src/richtext/richtextbulletspage.cpp:193
#: ../src/richtext/richtextbulletspage.cpp:214
#: ../src/richtext/richtextbulletspage.cpp:216
msgid "The bullet character."
msgstr "Madde imi karakteri."

#: ../src/richtext/richtextsymboldlg.cpp:443
#: ../src/richtext/richtextsymboldlg.cpp:445
msgid "The character code."
msgstr "Karakter kodu."

#: ../src/common/fontmap.cpp:203
#, c-format
msgid ""
"The charset '%s' is unknown. You may select\n"
"another charset to replace it with or choose\n"
"[Cancel] if it cannot be replaced"
msgstr ""
"'%s' karakter kümesi bilinmiyor. Yerine\n"
"başka bir tane seçebilir ya da \n"
"seçemiyorsanız [İptal] düğmesine tıklayabilirsiniz"

#: ../src/msw/ole/dataobj.cpp:394
#, c-format
msgid "The clipboard format '%d' doesn't exist."
msgstr "'%d' pano biçimi bulunamıyor."

#: ../src/richtext/richtextstylepage.cpp:130
#: ../src/richtext/richtextstylepage.cpp:132
msgid "The default style for the next paragraph."
msgstr "Sonraki paragraf için varsayılan biçem."

#: ../src/generic/dirdlgg.cpp:202
#, c-format
msgid ""
"The directory '%s' does not exist\n"
"Create it now?"
msgstr ""
"'%s' klasörü bulunamadı\n"
"Şimdi oluşturulsun mu?"

#: ../src/html/htmprint.cpp:271
#, c-format
msgid ""
"The document \"%s\" doesn't fit on the page horizontally and will be "
"truncated if printed.\n"
"\n"
"Would you like to proceed with printing it nevertheless?"
msgstr ""
"\"%s\" belgesi sayfaya yatay olarak sığmıyor ve yazdırılırsa budanacak.\n"
"\n"
"Buna rağmen yazdırmak istiyor musunuz?"

#: ../src/common/docview.cpp:1202
#, c-format
msgid ""
"The file '%s' doesn't exist and couldn't be opened.\n"
"It has been removed from the most recently used files list."
msgstr ""
"'%s' dosyası yok ve açılamadı.\n"
"Son kullanılan dosyalar listesinden kaldırıldı."

#: ../src/richtext/richtextindentspage.cpp:208
#: ../src/richtext/richtextindentspage.cpp:210
#: ../src/richtext/richtextliststylepage.cpp:394
#: ../src/richtext/richtextliststylepage.cpp:396
msgid "The first line indent."
msgstr "İlk satır girintisi."

#: ../src/gtk/utilsgtk.cpp:481
msgid "The following standard GTK+ options are also supported:\n"
msgstr "Aşağıdaki standart GTK+ seçenekleri de desteklenmektedir:\n"

#: ../src/generic/fontdlgg.cpp:414 ../src/generic/fontdlgg.cpp:416
msgid "The font colour."
msgstr "Yazı türü rengi."

#: ../src/generic/fontdlgg.cpp:375 ../src/generic/fontdlgg.cpp:377
msgid "The font family."
msgstr "Yazı türü ailesi."

#: ../src/richtext/richtextsymboldlg.cpp:405
#: ../src/richtext/richtextsymboldlg.cpp:407
msgid "The font from which to take the symbol."
msgstr "Simgenin alınacağı yazı türü."

#: ../src/generic/fontdlgg.cpp:427 ../src/generic/fontdlgg.cpp:429
#: ../src/generic/fontdlgg.cpp:434 ../src/generic/fontdlgg.cpp:436
msgid "The font point size."
msgstr "Yazı türü punto boyutu."

#: ../src/osx/carbon/fontdlg.cpp:343 ../src/osx/carbon/fontdlg.cpp:345
msgid "The font size in points."
msgstr "Punto cinsinden yazı türü boyutu."

#: ../src/richtext/richtextfontpage.cpp:181
#: ../src/richtext/richtextfontpage.cpp:183
msgid "The font size units, points or pixels."
msgstr "Yazı türü boyutu birimi, punto ya da piksel."

#: ../src/generic/fontdlgg.cpp:386 ../src/generic/fontdlgg.cpp:388
msgid "The font style."
msgstr "Yazı türü biçemi."

#: ../src/generic/fontdlgg.cpp:397 ../src/generic/fontdlgg.cpp:399
msgid "The font weight."
msgstr "Yazı türü yoğunluğu."

#: ../src/common/docview.cpp:1483
#, c-format
msgid "The format of file '%s' couldn't be determined."
msgstr "'%s' dosyasının biçimi belirlenemedi."

#: ../src/richtext/richtextbackgroundpage.cpp:219
#: ../src/richtext/richtextbackgroundpage.cpp:221
msgid "The horizontal offset."
msgstr "Yatay öteleme."

#: ../src/richtext/richtextindentspage.cpp:199
#: ../src/richtext/richtextindentspage.cpp:201
#: ../src/richtext/richtextliststylepage.cpp:385
#: ../src/richtext/richtextliststylepage.cpp:387
msgid "The left indent."
msgstr "Sol girinti."

#: ../src/richtext/richtextmarginspage.cpp:194
#: ../src/richtext/richtextmarginspage.cpp:196
msgid "The left margin size."
msgstr "Sol kenar boşluğu boyutu."

#: ../src/richtext/richtextmarginspage.cpp:308
#: ../src/richtext/richtextmarginspage.cpp:310
msgid "The left padding size."
msgstr "Sol yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:534
#: ../src/richtext/richtextsizepage.cpp:536
#: ../src/richtext/richtextsizepage.cpp:548
#: ../src/richtext/richtextsizepage.cpp:550
msgid "The left position."
msgstr "Sol konum."

#: ../src/richtext/richtextindentspage.cpp:288
#: ../src/richtext/richtextindentspage.cpp:290
#: ../src/richtext/richtextliststylepage.cpp:462
#: ../src/richtext/richtextliststylepage.cpp:464
msgid "The line spacing."
msgstr "Satır aralığı."

#: ../src/richtext/richtextbulletspage.cpp:255
#: ../src/richtext/richtextbulletspage.cpp:257
msgid "The list item number."
msgstr "Liste ögesi numarası."

#: ../src/msw/ole/automtn.cpp:664
msgid "The locale ID is unknown."
msgstr "Yerel kodu bilinmiyor."

#: ../src/richtext/richtextsizepage.cpp:366
#: ../src/richtext/richtextsizepage.cpp:368
msgid "The object height."
msgstr "Nesne yüksekliği."

#: ../src/richtext/richtextsizepage.cpp:474
#: ../src/richtext/richtextsizepage.cpp:476
msgid "The object maximum height."
msgstr "En fazla nesne yüksekliği."

#: ../src/richtext/richtextsizepage.cpp:447
#: ../src/richtext/richtextsizepage.cpp:449
msgid "The object maximum width."
msgstr "En fazla nesne genişliği."

#: ../src/richtext/richtextsizepage.cpp:420
#: ../src/richtext/richtextsizepage.cpp:422
msgid "The object minimum height."
msgstr "En az nesne yüksekliği."

#: ../src/richtext/richtextsizepage.cpp:393
#: ../src/richtext/richtextsizepage.cpp:395
msgid "The object minimum width."
msgstr "En az nesne genişliği."

#: ../src/richtext/richtextsizepage.cpp:332
#: ../src/richtext/richtextsizepage.cpp:334
msgid "The object width."
msgstr "Nesne genişliği."

#: ../src/richtext/richtextindentspage.cpp:227
#: ../src/richtext/richtextindentspage.cpp:229
msgid "The outline level."
msgstr "Taslak düzeyi."

#: ../src/common/log.cpp:277
#, c-format
msgid "The previous message repeated %u time."
msgid_plural "The previous message repeated %u times."
msgstr[0] "Önceki ileti %u kez yinelendi."

#: ../src/common/log.cpp:270
msgid "The previous message repeated once."
msgstr "Önceki ileti bir kez yinelendi."

#: ../src/richtext/richtextsymboldlg.cpp:462
#: ../src/richtext/richtextsymboldlg.cpp:464
msgid "The range to show."
msgstr "Görüntülenecek aralık."

#: ../src/generic/dbgrptg.cpp:322
msgid ""
"The report contains the files listed below. If any of these files contain "
"private information,\n"
"please uncheck them and they will be removed from the report.\n"
msgstr ""
"Bu rapor aşağıdaki dosyaları içermektedir. Bu dosyalarda özel bilgileriniz "
"varsa,\n"
"rapordan çıkarmak istediğiniz dosyaların işaretini kaldırın.\n"

#: ../src/common/cmdline.cpp:1254
#, c-format
msgid "The required parameter '%s' was not specified."
msgstr "Gerekli '%s' parametresi belirtilmemiş."

#: ../src/richtext/richtextindentspage.cpp:217
#: ../src/richtext/richtextindentspage.cpp:219
#: ../src/richtext/richtextliststylepage.cpp:403
#: ../src/richtext/richtextliststylepage.cpp:405
msgid "The right indent."
msgstr "Sağ girinti."

#: ../src/richtext/richtextmarginspage.cpp:219
#: ../src/richtext/richtextmarginspage.cpp:221
msgid "The right margin size."
msgstr "Sağ kenar boşluğu boyutu."

#: ../src/richtext/richtextmarginspage.cpp:333
#: ../src/richtext/richtextmarginspage.cpp:335
msgid "The right padding size."
msgstr "Sağ yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:604
#: ../src/richtext/richtextsizepage.cpp:606
#: ../src/richtext/richtextsizepage.cpp:618
#: ../src/richtext/richtextsizepage.cpp:620
msgid "The right position."
msgstr "Sağ konum."

#: ../src/richtext/richtextbackgroundpage.cpp:309
#: ../src/richtext/richtextbackgroundpage.cpp:311
msgid "The shadow blur distance."
msgstr "Gölge bulanıklaştırma uzaklığı."

#: ../src/richtext/richtextbackgroundpage.cpp:266
#: ../src/richtext/richtextbackgroundpage.cpp:268
msgid "The shadow colour."
msgstr "Gölge rengi.."

#: ../src/richtext/richtextbackgroundpage.cpp:336
#: ../src/richtext/richtextbackgroundpage.cpp:338
msgid "The shadow opacity."
msgstr "Gölge matlığı."

#: ../src/richtext/richtextbackgroundpage.cpp:282
#: ../src/richtext/richtextbackgroundpage.cpp:284
msgid "The shadow spread."
msgstr "Gölge yayılması."

#: ../src/richtext/richtextindentspage.cpp:267
#: ../src/richtext/richtextliststylepage.cpp:439
#: ../src/richtext/richtextliststylepage.cpp:441
msgid "The spacing after the paragraph."
msgstr "Paragraftan sonraki boşluk."

#: ../src/richtext/richtextindentspage.cpp:257
#: ../src/richtext/richtextindentspage.cpp:259
#: ../src/richtext/richtextliststylepage.cpp:430
#: ../src/richtext/richtextliststylepage.cpp:432
msgid "The spacing before the paragraph."
msgstr "Paragraftan önceki boşluk."

#: ../src/richtext/richtextstylepage.cpp:110
#: ../src/richtext/richtextstylepage.cpp:112
msgid "The style name."
msgstr "Biçem adı."

#: ../src/richtext/richtextstylepage.cpp:120
#: ../src/richtext/richtextstylepage.cpp:122
msgid "The style on which this style is based."
msgstr "Bu biçemin temel alındığı biçem."

#: ../src/richtext/richtextstyledlg.cpp:214
#: ../src/richtext/richtextstyledlg.cpp:216
msgid "The style preview."
msgstr "Biçem önizlemesi."

#: ../src/msw/ole/automtn.cpp:680
msgid "The system cannot find the file specified."
msgstr "Sistem belirtilen dosyayı bulamadı."

#: ../src/richtext/richtexttabspage.cpp:114
#: ../src/richtext/richtexttabspage.cpp:116
msgid "The tab position."
msgstr "Sekme konumu."

#: ../src/richtext/richtexttabspage.cpp:120
msgid "The tab positions."
msgstr "Sekme konumları."

#: ../src/richtext/richtextctrl.cpp:3098
msgid "The text couldn't be saved."
msgstr "Metin kaydedilemedi."

#: ../src/richtext/richtextmarginspage.cpp:242
#: ../src/richtext/richtextmarginspage.cpp:244
msgid "The top margin size."
msgstr "Üst kenar boşluğu boyutu."

#: ../src/richtext/richtextmarginspage.cpp:356
#: ../src/richtext/richtextmarginspage.cpp:358
msgid "The top padding size."
msgstr "Üst yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:569
#: ../src/richtext/richtextsizepage.cpp:571
#: ../src/richtext/richtextsizepage.cpp:583
#: ../src/richtext/richtextsizepage.cpp:585
msgid "The top position."
msgstr "Üst konum."

#: ../src/common/cmdline.cpp:1232
#, c-format
msgid "The value for the option '%s' must be specified."
msgstr "'%s' seçeneği için değer belirtilmelidir."

#: ../src/richtext/richtextborderspage.cpp:585
#: ../src/richtext/richtextborderspage.cpp:587
msgid "The value of the corner radius."
msgstr "Köşe yarıçapı değeri."

#: ../src/msw/dialup.cpp:433
#, c-format
msgid ""
"The version of remote access service (RAS) installed on this machine is too "
"old, please upgrade (the following required function is missing: %s)."
msgstr ""
"Bu bilgisayarda kurulu uzak erişim hizmetinin (RAS) sürümü çok eski, lütfen "
"yükseltin (gereken şu işlev eksik: %s)."

#: ../src/richtext/richtextbackgroundpage.cpp:242
#: ../src/richtext/richtextbackgroundpage.cpp:244
msgid "The vertical offset."
msgstr "Dikey öteleme."

#: ../src/richtext/richtextprint.cpp:619 ../src/html/htmprint.cpp:745
msgid ""
"There was a problem during page setup: you may need to set a default printer."
msgstr ""
"Sayfa ayarlanırken bir sorun çıktı: bir varsayılan yazıcı belirlemeniz "
"gerekebilir."

#: ../src/html/htmprint.cpp:255
msgid ""
"This document doesn't fit on the page horizontally and will be truncated "
"when it is printed."
msgstr "Bu belge sayfaya yatay olarak sığmıyor ve yazdırılırsa budanacak."

#: ../src/common/image.cpp:2854
#, c-format
msgid "This is not a %s."
msgstr "Bu bir %s değil."

#: ../src/common/wincmn.cpp:1653
msgid "This platform does not support background transparency."
msgstr "Bu platformda art alan saydamlığı desteklenmiyor."

#: ../src/gtk/window.cpp:4660
msgid ""
"This program was compiled with a too old version of GTK+, please rebuild "
"with GTK+ 2.12 or newer."
msgstr ""
"Bu program çok eski bir GTK+ sürümüyle derlenmiş. Lütfen GTK+ 2.12 ya da "
"üzeri bir sürümle yeniden derleyin."

#: ../src/msw/thread.cpp:1240
msgid ""
"Thread module initialization failed: cannot store value in thread local "
"storage"
msgstr "İş parçacığı modülü başlatılamadı: yerel depoya değer koyulamıyor"

#: ../src/unix/threadpsx.cpp:1794
msgid "Thread module initialization failed: failed to create thread key"
msgstr ""
"İş parçacığı modülü başlatılamadı: iş parçacığı anahtarı oluşturulamadı"

#: ../src/msw/thread.cpp:1228
msgid ""
"Thread module initialization failed: impossible to allocate index in thread "
"local storage"
msgstr "İş parçacığı modülü başlatılamadı: yerel depoda dizin oluşturulamıyor"

#: ../src/unix/threadpsx.cpp:1043
msgid "Thread priority setting is ignored."
msgstr "İş parçacığı öncelik ayarları yok sayıldı."

#: ../src/msw/mdi.cpp:176
msgid "Tile &Horizontally"
msgstr "&Yatay Döşe"

#: ../src/msw/mdi.cpp:177
msgid "Tile &Vertically"
msgstr "&Dikey Döşe"

#: ../src/common/ftp.cpp:200
msgid "Timeout while waiting for FTP server to connect, try passive mode."
msgstr "FTP sunucu bağlantısı zaman aşımına uğradı, pasif kipi deneyin."

#: ../src/generic/tipdlg.cpp:201
msgid "Tip of the Day"
msgstr "Günün İpucu"

#: ../src/generic/tipdlg.cpp:140
msgid "Tips not available, sorry!"
msgstr "Maalesef herhangi bir ipucu yok!"

#: ../src/generic/prntdlgg.cpp:242
msgid "To:"
msgstr "Kime:"

#: ../src/richtext/richtextbuffer.cpp:8363
msgid "Too many EndStyle calls!"
msgstr "Çok fazla EndStyle çağrısı!"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:891
msgid "Tooltip"
msgstr "İpucu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:892
msgid "TooltipText"
msgstr "İpucuMetni"

#: ../src/generic/prntdlgg.cpp:881
msgid "Top margin (mm):"
msgstr "Üst kenar boşluğu (mm):"

#: ../src/generic/aboutdlgg.cpp:79
msgid "Translations by "
msgstr "Çeviren "

#: ../src/generic/aboutdlgg.cpp:188
msgid "Translators"
msgstr "Çevirmenler"

#. TRANSLATORS: Name of Boolean true value
#: ../src/propgrid/propgrid.cpp:211
msgid "True"
msgstr "Doğru"

#: ../src/common/fs_mem.cpp:227
#, c-format
msgid "Trying to remove file '%s' from memory VFS, but it is not loaded!"
msgstr ""
"'%s' dosyası yüklü olmadığı halde VFS belleğinden silinmeye çalışılıyor!"

#: ../src/common/fmapbase.cpp:156
msgid "Turkish (ISO-8859-9)"
msgstr "Türkçe (ISO-8859-9)"

#: ../src/richtext/richtextfontpage.cpp:151
#: ../src/richtext/richtextfontpage.cpp:153
msgid "Type a font name."
msgstr "Bir yazı türü adı yazın."

#: ../src/richtext/richtextfontpage.cpp:166
#: ../src/richtext/richtextfontpage.cpp:168
msgid "Type a size in points."
msgstr "Punto cinsinden bir boyut yazın."

#: ../src/msw/ole/automtn.cpp:676
#, c-format
msgid "Type mismatch in argument %u."
msgstr "%u argümanında tür uyuşmazlığı."

#: ../src/common/xtixml.cpp:356 ../src/common/xtixml.cpp:509
#: ../src/common/xtistrm.cpp:318
msgid "Type must have enum - long conversion"
msgstr "Tür enum - long çevrimini desteklemelidir"

#: ../src/propgrid/propgridiface.cpp:401
#, c-format
msgid ""
"Type operation \"%s\" failed: Property labeled \"%s\" is of type \"%s\", NOT "
"\"%s\"."
msgstr ""
"\"%s\" tür işlemi yapılamadı: Etiketlenen özellik \"%s\" \"%s\" türünde, \"%s"
"\" türünde DEĞİL."

#: ../src/common/paper.cpp:133
msgid "US Std Fanfold, 14 7/8 x 11 in"
msgstr "US Std Fanfold, 14 7/8 x 11 inç"

#: ../src/common/fmapbase.cpp:196
msgid "US-ASCII"
msgstr "US-ASCII"

#: ../src/unix/fswatcher_inotify.cpp:109
msgid "Unable to add inotify watch"
msgstr "inotify izlemesi eklenemedi"

#: ../src/unix/fswatcher_kqueue.cpp:136
msgid "Unable to add kqueue watch"
msgstr "kqueue izlemesi eklenemedi"

#: ../include/wx/msw/private/fswatcher.h:142
msgid "Unable to associate handle with I/O completion port"
msgstr "Giriş/Çıkış tamamlanma kapısı işleyici ile ilişkilendirilemedi"

#: ../include/wx/msw/private/fswatcher.h:125
msgid "Unable to close I/O completion port handle"
msgstr "Giriş/Çıkış tamamlanma kapısı işleyicisi kapatılamadı"

#: ../src/unix/fswatcher_inotify.cpp:97
msgid "Unable to close inotify instance"
msgstr "inotify kopyası kapatılamadı"

#: ../include/wx/unix/private/fswatcher_kqueue.h:74
#, c-format
msgid "Unable to close path '%s'"
msgstr "'%s' yolu kapatılamadı"

#: ../include/wx/msw/private/fswatcher.h:48
#, c-format
msgid "Unable to close the handle for '%s'"
msgstr "'%s' işleyicisi kapatılamadı"

#: ../include/wx/msw/private/fswatcher.h:273
msgid "Unable to create I/O completion port"
msgstr "Giriş/Çıkış tamamlanma kapısı oluşturulamadı"

#: ../src/msw/fswatcher.cpp:84
msgid "Unable to create IOCP worker thread"
msgstr "IOCP iş parçacığı oluşturulamadı"

#: ../src/unix/fswatcher_inotify.cpp:74
msgid "Unable to create inotify instance"
msgstr "inotify kopyası oluşturulamadı"

#: ../src/unix/fswatcher_kqueue.cpp:97
msgid "Unable to create kqueue instance"
msgstr "kqueue kopyası oluşturulamadı"

#: ../include/wx/msw/private/fswatcher.h:262
msgid "Unable to dequeue completion packet"
msgstr "Tamamlanma paketi kuyruktan çıkarılamadı"

#: ../src/unix/fswatcher_kqueue.cpp:185
msgid "Unable to get events from kqueue"
msgstr "Olaylar kqueue üzerinden alınamadı"

#: ../src/gtk/app.cpp:435
msgid "Unable to initialize GTK+, is DISPLAY set properly?"
msgstr "GTK+ başlatılamadı, DISPLAY düzgün ayarlanmış mı?"

#: ../include/wx/unix/private/fswatcher_kqueue.h:57
#, c-format
msgid "Unable to open path '%s'"
msgstr "'%s' yolu açılamadı"

#: ../src/html/htmlwin.cpp:583
#, c-format
msgid "Unable to open requested HTML document: %s"
msgstr "İstenen HTML belgesi açılamıyor: %s"

#: ../src/unix/sound.cpp:368
msgid "Unable to play sound asynchronously."
msgstr "Ses zaman eşlemesiz olarak çalınamıyor."

#: ../include/wx/msw/private/fswatcher.h:213
msgid "Unable to post completion status"
msgstr "Tamamlanma durumu gönderilemedi"

#: ../src/unix/fswatcher_inotify.cpp:556
msgid "Unable to read from inotify descriptor"
msgstr "inotify tanımlayıcısı okunamadı"

#: ../src/unix/fswatcher_inotify.cpp:141
#, c-format
msgid "Unable to remove inotify watch %i"
msgstr "%i inotify izlemesi kaldırılamadı"

#: ../src/unix/fswatcher_kqueue.cpp:153
msgid "Unable to remove kqueue watch"
msgstr "kqueue izlemesi kaldırılamadı"

#: ../src/msw/fswatcher.cpp:168
#, c-format
msgid "Unable to set up watch for '%s'"
msgstr "'%s' izlemesi kurulamadı"

#: ../src/msw/fswatcher.cpp:91
msgid "Unable to start IOCP worker thread"
msgstr "IOCP iş parçacığı başlatılamadı"

#: ../src/common/stockitem.cpp:201
msgid "Undelete"
msgstr "Silmeyi geri al"

#: ../src/common/stockitem.cpp:202
msgid "Underline"
msgstr "Altı çizili"

#. TRANSLATORS: Label of underlined font
#: ../src/richtext/richtextfontpage.cpp:359 ../src/osx/carbon/fontdlg.cpp:370
#: ../src/propgrid/advprops.cpp:690
msgid "Underlined"
msgstr "Altı çizili"

#: ../src/common/stockitem.cpp:265
msgid "Undo last action"
msgstr "Son işlemi geri al"

#: ../src/common/cmdline.cpp:1029
#, c-format
msgid "Unexpected characters following option '%s'."
msgstr "'%s' seçeneğinden sonra beklenmeyen karakterler."

#: ../src/unix/fswatcher_inotify.cpp:274
#, c-format
msgid "Unexpected event for \"%s\": no matching watch descriptor."
msgstr "\"%s\" için beklenmeyen etkinlik: uyan izleme belirteci yok."

#: ../src/common/cmdline.cpp:1195
#, c-format
msgid "Unexpected parameter '%s'"
msgstr "Beklenmeyen parametre '%s'"

#: ../include/wx/msw/private/fswatcher.h:148
msgid "Unexpectedly new I/O completion port was created"
msgstr "Beklenmedik şekilde yeni Giriş/Çıkış tamamlanma kapısı oluşturuldu"

#: ../src/msw/fswatcher.cpp:70
msgid "Ungraceful worker thread termination"
msgstr "Uygunsuz iş parçacığı sonlandırması"

#: ../src/richtext/richtextsymboldlg.cpp:459
#: ../src/richtext/richtextsymboldlg.cpp:460
#: ../src/richtext/richtextsymboldlg.cpp:461
msgid "Unicode"
msgstr "Unikod"

#: ../src/common/fmapbase.cpp:185 ../src/common/fmapbase.cpp:191
msgid "Unicode 16 bit (UTF-16)"
msgstr "Unikod 16 bit (UTF-16)"

#: ../src/common/fmapbase.cpp:190
msgid "Unicode 16 bit Big Endian (UTF-16BE)"
msgstr "Unikod 16 bit Big Endian (UTF-16BE)"

#: ../src/common/fmapbase.cpp:186
msgid "Unicode 16 bit Little Endian (UTF-16LE)"
msgstr "Unikod 16 bit Little Endian (UTF-16LE)"

#: ../src/common/fmapbase.cpp:187 ../src/common/fmapbase.cpp:193
msgid "Unicode 32 bit (UTF-32)"
msgstr "Unikod 32 bit (UTF-32)"

#: ../src/common/fmapbase.cpp:192
msgid "Unicode 32 bit Big Endian (UTF-32BE)"
msgstr "Unikod 32 bit Big Endian (UTF-32BE)"

#: ../src/common/fmapbase.cpp:188
msgid "Unicode 32 bit Little Endian (UTF-32LE)"
msgstr "Unikod 32 bit Little Endian (UTF-32LE)"

#: ../src/common/fmapbase.cpp:182
msgid "Unicode 7 bit (UTF-7)"
msgstr "7 bit Unikod (UTF-7)"

#: ../src/common/fmapbase.cpp:183
msgid "Unicode 8 bit (UTF-8)"
msgstr "8 bit Unikod (UTF-8)"

#: ../src/common/stockitem.cpp:204
msgid "Unindent"
msgstr "Girintiyi geri al"

#: ../src/richtext/richtextborderspage.cpp:360
#: ../src/richtext/richtextborderspage.cpp:362
msgid "Units for the bottom border width."
msgstr "Alt kenarlık genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:277
#: ../src/richtext/richtextmarginspage.cpp:279
msgid "Units for the bottom margin."
msgstr "Alt kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:528
#: ../src/richtext/richtextborderspage.cpp:530
msgid "Units for the bottom outline width."
msgstr "Alt taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:391
#: ../src/richtext/richtextmarginspage.cpp:393
msgid "Units for the bottom padding."
msgstr "Alt yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:664
#: ../src/richtext/richtextsizepage.cpp:666
msgid "Units for the bottom position."
msgstr "Alt konumun birimleri."

#: ../src/richtext/richtextborderspage.cpp:596
#: ../src/richtext/richtextborderspage.cpp:598
msgid "Units for the corner radius."
msgstr "Köşe yarıçapı birimi."

#: ../src/richtext/richtextborderspage.cpp:258
#: ../src/richtext/richtextborderspage.cpp:260
msgid "Units for the left border width."
msgstr "Sol sınır genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:204
#: ../src/richtext/richtextmarginspage.cpp:206
msgid "Units for the left margin."
msgstr "Sol kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:426
#: ../src/richtext/richtextborderspage.cpp:428
msgid "Units for the left outline width."
msgstr "Sol taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:318
#: ../src/richtext/richtextmarginspage.cpp:320
msgid "Units for the left padding."
msgstr "Sol yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:559
#: ../src/richtext/richtextsizepage.cpp:561
msgid "Units for the left position."
msgstr "Sol konumun birimleri."

#: ../src/richtext/richtextsizepage.cpp:485
#: ../src/richtext/richtextsizepage.cpp:487
msgid "Units for the maximum object height."
msgstr "En fazla nesne yüksekliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:458
#: ../src/richtext/richtextsizepage.cpp:460
msgid "Units for the maximum object width."
msgstr "En fazla nesne genişliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:431
#: ../src/richtext/richtextsizepage.cpp:433
msgid "Units for the minimum object height."
msgstr "En az nesne yüksekliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:404
#: ../src/richtext/richtextsizepage.cpp:406
msgid "Units for the minimum object width."
msgstr "En az nesne genişliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:377
#: ../src/richtext/richtextsizepage.cpp:379
msgid "Units for the object height."
msgstr "Nesne yüksekliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:343
#: ../src/richtext/richtextsizepage.cpp:345
msgid "Units for the object width."
msgstr "Nesne genişliğinin birimleri."

#: ../src/richtext/richtextborderspage.cpp:292
#: ../src/richtext/richtextborderspage.cpp:294
msgid "Units for the right border width."
msgstr "Sağ sınır genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:229
#: ../src/richtext/richtextmarginspage.cpp:231
msgid "Units for the right margin."
msgstr "Sağ kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:460
#: ../src/richtext/richtextborderspage.cpp:462
msgid "Units for the right outline width."
msgstr "Sağ taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:343
#: ../src/richtext/richtextmarginspage.cpp:345
msgid "Units for the right padding."
msgstr "Sağ yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:629
#: ../src/richtext/richtextsizepage.cpp:631
msgid "Units for the right position."
msgstr "Sağ konumun birimleri."

#: ../src/richtext/richtextborderspage.cpp:326
#: ../src/richtext/richtextborderspage.cpp:328
msgid "Units for the top border width."
msgstr "Üst kenarlık genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:252
#: ../src/richtext/richtextmarginspage.cpp:254
msgid "Units for the top margin."
msgstr "Üst kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:494
#: ../src/richtext/richtextborderspage.cpp:496
msgid "Units for the top outline width."
msgstr "Üst taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:366
#: ../src/richtext/richtextmarginspage.cpp:368
msgid "Units for the top padding."
msgstr "Üst yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:594
#: ../src/richtext/richtextsizepage.cpp:596
msgid "Units for the top position."
msgstr "Üst konumun birimleri."

#: ../src/richtext/richtextbackgroundpage.cpp:230
#: ../src/richtext/richtextbackgroundpage.cpp:232
#: ../src/richtext/richtextbackgroundpage.cpp:253
#: ../src/richtext/richtextbackgroundpage.cpp:255
#: ../src/richtext/richtextbackgroundpage.cpp:293
#: ../src/richtext/richtextbackgroundpage.cpp:295
#: ../src/richtext/richtextbackgroundpage.cpp:320
#: ../src/richtext/richtextbackgroundpage.cpp:322
msgid "Units for this value."
msgstr "Bu değerin birimleri."

#: ../src/msw/dde.cpp:1174
#, c-format
msgid "Unknown DDE error %08x"
msgstr "Bilinmeyen DDE hatası %08x"

#: ../src/common/xtistrm.cpp:410
msgid "Unknown Object passed to GetObjectClassInfo"
msgstr "GetObjectClassInfo işlevi bilinmeyen nesne ile çağrıldı"

#: ../src/common/imagpng.cpp:366
#, c-format
msgid "Unknown PNG resolution unit %d"
msgstr "Bilinmeyen PNG çözünürlük birimi %d"

#: ../src/common/xtixml.cpp:327
#, c-format
msgid "Unknown Property %s"
msgstr "Bilinmeyen Özellik %s"

#: ../src/common/imagtiff.cpp:529
#, c-format
msgid "Unknown TIFF resolution unit %d ignored"
msgstr "Bilinmeyen TIFF %d çözünürlük birimi yok sayıldı"

#: ../src/unix/dlunix.cpp:160
msgid "Unknown dynamic library error"
msgstr "Blinmeyen devingen kitaplık sorunu"

#: ../src/common/fmapbase.cpp:810
#, c-format
msgid "Unknown encoding (%d)"
msgstr "Bilinmeyen kodlama (%d)"

#: ../src/msw/ole/automtn.cpp:688
#, c-format
msgid "Unknown error %08x"
msgstr "Bilinmeyen sorun %08x"

#: ../src/msw/ole/automtn.cpp:647
msgid "Unknown exception"
msgstr "Bilinmeyen istisna"

#: ../src/common/image.cpp:2839
msgid "Unknown image data format."
msgstr "Bilinmeyen görsel veri biçimi."

#: ../src/common/cmdline.cpp:914
#, c-format
msgid "Unknown long option '%s'"
msgstr "Blinmeyen long seçeneği '%s'"

#: ../src/msw/ole/automtn.cpp:631
msgid "Unknown name or named argument."
msgstr "Bilinmeyen ad ya da adlandırılmış argüman."

#: ../src/common/cmdline.cpp:929 ../src/common/cmdline.cpp:951
#, c-format
msgid "Unknown option '%s'"
msgstr "Bilinmeyen seçenek '%s'"

#: ../src/common/mimecmn.cpp:225
#, c-format
msgid "Unmatched '{' in an entry for mime type %s."
msgstr "%s MIME türü kaydına uymayan '{'."

#: ../src/common/cmdproc.cpp:262 ../src/common/cmdproc.cpp:288
#: ../src/common/cmdproc.cpp:308
msgid "Unnamed command"
msgstr "Adsız komut"

#. TRANSLATORS: Text  displayed for unspecified value
#: ../src/propgrid/propgrid.cpp:413
msgid "Unspecified"
msgstr "Belirtilmemiş"

#: ../src/msw/clipbrd.cpp:311
msgid "Unsupported clipboard format."
msgstr "Desteklenmeyen pano biçimi."

#: ../src/common/appcmn.cpp:256
#, c-format
msgid "Unsupported theme '%s'."
msgstr "Desteklenmeyen tema '%s'."

#. TRANSLATORS: Name of keyboard key
#: ../src/generic/fdrepdlg.cpp:152 ../src/common/stockitem.cpp:205
#: ../src/common/accelcmn.cpp:63
msgid "Up"
msgstr "Yukarı"

#: ../src/richtext/richtextliststylepage.cpp:483
#: ../src/richtext/richtextbulletspage.cpp:275
msgid "Upper case letters"
msgstr "Büyük harfler"

#: ../src/richtext/richtextliststylepage.cpp:485
#: ../src/richtext/richtextbulletspage.cpp:277
msgid "Upper case roman numerals"
msgstr "Büyük harf romen rakamları"

#: ../src/common/cmdline.cpp:1326
#, c-format
msgid "Usage: %s"
msgstr "Kullanım: %s"

#: ../src/richtext/richtextbackgroundpage.cpp:194
msgid "Use &shadow"
msgstr "&Gölge kullanılsın"

#: ../src/richtext/richtextindentspage.cpp:169
#: ../src/richtext/richtextindentspage.cpp:171
#: ../src/richtext/richtextliststylepage.cpp:358
#: ../src/richtext/richtextliststylepage.cpp:360
msgid "Use the current alignment setting."
msgstr "Geçerli hizalama ayarları kullanılsın."

#: ../src/common/valtext.cpp:179
msgid "Validation conflict"
msgstr "Doğrulama çelişkisi"

#: ../src/propgrid/manager.cpp:238
msgid "Value"
msgstr "Değer"

#: ../src/propgrid/props.cpp:386 ../src/propgrid/props.cpp:500
#, c-format
msgid "Value must be %s or higher."
msgstr "Değer %s ya da daha büyük olmalı."

#: ../src/propgrid/props.cpp:417 ../src/propgrid/props.cpp:531
#, c-format
msgid "Value must be %s or less."
msgstr "Değer %s ya da daha küçük olmalı."

#: ../src/propgrid/props.cpp:393 ../src/propgrid/props.cpp:424
#: ../src/propgrid/props.cpp:507 ../src/propgrid/props.cpp:538
#, c-format
msgid "Value must be between %s and %s."
msgstr "Değer %s ile %s arasında olmalı."

#: ../src/generic/aboutdlgg.cpp:128
msgid "Version "
msgstr "Sürüm "

#: ../src/richtext/richtextsizepage.cpp:291
#: ../src/richtext/richtextsizepage.cpp:293
msgid "Vertical alignment."
msgstr "Dikey hizalama."

#: ../src/generic/filedlgg.cpp:202
msgid "View files as a detailed view"
msgstr "Dosyalar ayrıntılı görünümde görüntülensin"

#: ../src/generic/filedlgg.cpp:200
msgid "View files as a list view"
msgstr "Dosyalar liste görünümünde görüntülensin"

#: ../src/common/docview.cpp:1970
msgid "Views"
msgstr "Görünümler"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1777
msgid "Wait"
msgstr "Bekleme"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1779
msgid "Wait Arrow"
msgstr "Bekleme Oku"

#: ../src/unix/epolldispatcher.cpp:213
#, c-format
msgid "Waiting for IO on epoll descriptor %d failed"
msgstr "%d epoll tanımlayıcısı üstündeki GÇ beklemesi başarısız"

#: ../src/common/log.cpp:223
msgid "Warning: "
msgstr "Uyarı: "

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1778
msgid "Watch"
msgstr "İzleme"

#. TRANSLATORS: Label of font weight
#: ../src/propgrid/advprops.cpp:685
msgid "Weight"
msgstr "Yoğunluk"

#: ../src/common/fmapbase.cpp:148
msgid "Western European (ISO-8859-1)"
msgstr "Batı Avrupa (ISO-8859-1)"

#: ../src/common/fmapbase.cpp:162
msgid "Western European with Euro (ISO-8859-15)"
msgstr "Batı Avrupa (Euro) (ISO-8859-15)"

#: ../src/generic/fontdlgg.cpp:446 ../src/generic/fontdlgg.cpp:448
msgid "Whether the font is underlined."
msgstr "Yazı türünün altı çizili olup olmadığı."

#: ../src/propgrid/advprops.cpp:1611
msgid "White"
msgstr "Beyaz"

#: ../src/html/helpwnd.cpp:534
msgid "Whole words only"
msgstr "Yalnız tam kelimeler"

#: ../src/univ/themes/win32.cpp:1102
msgid "Win32 theme"
msgstr "Win32 teması"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:893
msgid "Window"
msgstr "Pencere"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:894
msgid "WindowFrame"
msgstr "PencereÇerçevesi"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:895
msgid "WindowText"
msgstr "PencereMetni"

#: ../src/common/fmapbase.cpp:177
msgid "Windows Arabic (CP 1256)"
msgstr "Windows Arapça (CP 1256)"

#: ../src/common/fmapbase.cpp:178
msgid "Windows Baltic (CP 1257)"
msgstr "Windows Baltık (CP 1257)"

#: ../src/common/fmapbase.cpp:171
msgid "Windows Central European (CP 1250)"
msgstr "Windows Orta Avrupa (CP 1250)"

#: ../src/common/fmapbase.cpp:168
msgid "Windows Chinese Simplified (CP 936) or GB-2312"
msgstr "Windows Basitleştirilmiş Çince (CP 936) ya da GB-2312"

#: ../src/common/fmapbase.cpp:170
msgid "Windows Chinese Traditional (CP 950) or Big-5"
msgstr "Windows Geleneksel Çince (CP 950) ya da Big-5"

#: ../src/common/fmapbase.cpp:172
msgid "Windows Cyrillic (CP 1251)"
msgstr "Windows Kiril (CP 1251)"

#: ../src/common/fmapbase.cpp:174
msgid "Windows Greek (CP 1253)"
msgstr "Windows Yunanca (CP 1253)"

#: ../src/common/fmapbase.cpp:176
msgid "Windows Hebrew (CP 1255)"
msgstr "Windows İbranice (CP 1255)"

#: ../src/common/fmapbase.cpp:167
msgid "Windows Japanese (CP 932) or Shift-JIS"
msgstr "Windows Japonca (CP 932) ya da Shift-JIS"

#: ../src/common/fmapbase.cpp:180
msgid "Windows Johab (CP 1361)"
msgstr "Windows Johab (CP 1361)"

#: ../src/common/fmapbase.cpp:169
msgid "Windows Korean (CP 949)"
msgstr "Windows Korece (CP 949)"

#: ../src/common/fmapbase.cpp:166
msgid "Windows Thai (CP 874)"
msgstr "Windows Tai (CP 874)"

#: ../src/common/fmapbase.cpp:175
msgid "Windows Turkish (CP 1254)"
msgstr "Windows Türkçe (CP 1254)"

#: ../src/common/fmapbase.cpp:179
msgid "Windows Vietnamese (CP 1258)"
msgstr "Windows Vietnamca (CP 1258)"

#: ../src/common/fmapbase.cpp:173
msgid "Windows Western European (CP 1252)"
msgstr "Windows Batı Avrupa (CP 1252)"

#: ../src/common/fmapbase.cpp:181
msgid "Windows/DOS OEM (CP 437)"
msgstr "Windows/DOS OEM (CP 437)"

#: ../src/common/fmapbase.cpp:165
msgid "Windows/DOS OEM Cyrillic (CP 866)"
msgstr "Windows/DOS OEM Kiril (CP 866)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:111
msgid "Windows_Left"
msgstr "Pencere_Sol"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:113
msgid "Windows_Menu"
msgstr "Pencere_Menü"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:112
msgid "Windows_Right"
msgstr "Pencere_Sağ"

#: ../src/common/ffile.cpp:150
#, c-format
msgid "Write error on file '%s'"
msgstr "'%s' dosyasına yazma hatası"

#: ../src/xml/xml.cpp:914
#, c-format
msgid "XML parsing error: '%s' at line %d"
msgstr "XML işleme hatası: '%s' %d satırında"

#: ../src/common/xpmdecod.cpp:796
msgid "XPM: Malformed pixel data!"
msgstr "XPM: Bozuk piksel verisi!"

#: ../src/common/xpmdecod.cpp:705
#, c-format
msgid "XPM: incorrect colour description in line %d"
msgstr "XPM: %d satırında hatalı renk açıklaması"

#: ../src/common/xpmdecod.cpp:680
msgid "XPM: incorrect header format!"
msgstr "XPM: hatalı üst bilgi biçimi!"

#: ../src/common/xpmdecod.cpp:716 ../src/common/xpmdecod.cpp:725
#, c-format
msgid "XPM: malformed colour definition '%s' at line %d!"
msgstr "XPM: '%s' bozuk renk tanımı %d satırında!"

#: ../src/common/xpmdecod.cpp:755
msgid "XPM: no colors left to use for mask!"
msgstr "XPM: maske için kullanılacak renk kalmadı!"

#: ../src/common/xpmdecod.cpp:782
#, c-format
msgid "XPM: truncated image data at line %d!"
msgstr "XPM: %d satırında budanmış görüntü verisi!"

#: ../src/propgrid/advprops.cpp:1610
msgid "Yellow"
msgstr "Sarı"

#: ../src/osx/carbon/overlay.cpp:155
msgid "You cannot Clear an overlay that is not inited"
msgstr "Hazırlanmamış bir örtüşmeyi temizleyemezsiniz"

#: ../src/osx/carbon/overlay.cpp:107 ../src/dfb/overlay.cpp:61
msgid "You cannot Init an overlay twice"
msgstr "Bir örtüşmeyi iki kez hazırlayamazsınız"

#: ../src/generic/dirdlgg.cpp:287
msgid "You cannot add a new directory to this section."
msgstr "Bu bölüme yeni bir klasör ekleyemezsiniz."

#: ../src/propgrid/propgrid.cpp:3299
msgid "You have entered invalid value. Press ESC to cancel editing."
msgstr ""
"Geçersiz bir değer yazdınız, düzenlemeyi iptal etmek için ESC tuşuna basın."

#: ../src/common/stockitem.cpp:209
msgid "Zoom &In"
msgstr "&Büyüt"

#: ../src/common/stockitem.cpp:210
msgid "Zoom &Out"
msgstr "&Küçült"

#: ../src/common/stockitem.cpp:209 ../src/common/prntbase.cpp:1594
msgid "Zoom In"
msgstr "Büyüt"

#: ../src/common/stockitem.cpp:210 ../src/common/prntbase.cpp:1580
msgid "Zoom Out"
msgstr "Küçült"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to &Fit"
msgstr "&Sığdır"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to Fit"
msgstr "Sığdır"

#: ../src/msw/dde.cpp:1141
msgid "a DDEML application has created a prolonged race condition."
msgstr "bir DDEML uygulaması uzun koşu durumu oluşturdu."

#: ../src/msw/dde.cpp:1129
msgid ""
"a DDEML function was called without first calling the DdeInitialize "
"function,\n"
"or an invalid instance identifier\n"
"was passed to a DDEML function."
msgstr ""
"DDEML işlevi DdeInitialize işlevi çağrılmadan önce çağrıldı,\n"
"ya da DDEML işlevine geçersiz bir \n"
"örnek tanımlayıcısı gönderildi."

#: ../src/msw/dde.cpp:1147
msgid "a client's attempt to establish a conversation has failed."
msgstr "bir istemcinin konuşma başlatma denemesi başarısız oldu."

#: ../src/msw/dde.cpp:1144
msgid "a memory allocation failed."
msgstr "bellek ayrılamadı."

#: ../src/msw/dde.cpp:1138
msgid "a parameter failed to be validated by the DDEML."
msgstr "parametre DDEML tarafından doğrulanamadı."

#: ../src/msw/dde.cpp:1120
msgid "a request for a synchronous advise transaction has timed out."
msgstr "eşzamanlı danışma işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1126
msgid "a request for a synchronous data transaction has timed out."
msgstr "eşzamanlı veri işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1135
msgid "a request for a synchronous execute transaction has timed out."
msgstr "eşzamanlı çalıştırma işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1153
msgid "a request for a synchronous poke transaction has timed out."
msgstr "eşzamanlı itme işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1168
msgid "a request to end an advise transaction has timed out."
msgstr "danışma işlemi bitirme isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1162
msgid ""
"a server-side transaction was attempted on a conversation\n"
"that was terminated by the client, or the server\n"
"terminated before completing a transaction."
msgstr ""
"istemci tarafından sonlandırılmış bir görüşme üstünde\n"
"sunucu tarafında bir işlem denendi, ya da sunucu\n"
"işlem tamamlanmadan sonlandırıldı."

#: ../src/msw/dde.cpp:1150
msgid "a transaction failed."
msgstr "işlem tamamlanamadı.."

#: ../src/common/accelcmn.cpp:189
msgid "alt"
msgstr "alt"

#: ../src/msw/dde.cpp:1132
msgid ""
"an application initialized as APPCLASS_MONITOR has\n"
"attempted to perform a DDE transaction,\n"
"or an application initialized as APPCMD_CLIENTONLY has \n"
"attempted to perform server transactions."
msgstr ""
"APPCLASS_MONITOR olarak başlatılmış bir uygulama\n"
"DDE hareketi gerçekleştirmeyi denedi,\n"
"ya da APPCMD_CLIENTONLY olarak başlatılmış bir uygulama\n"
"sunucu hareketi gerçekleştirmeyi denedi."

#: ../src/msw/dde.cpp:1156
msgid "an internal call to the PostMessage function has failed. "
msgstr "PostMessage işlevine içsel çağrı yapılamadı. "

#: ../src/msw/dde.cpp:1165
msgid "an internal error has occurred in the DDEML."
msgstr "DDEML içsel hatası."

#: ../src/msw/dde.cpp:1171
msgid ""
"an invalid transaction identifier was passed to a DDEML function.\n"
"Once the application has returned from an XTYP_XACT_COMPLETE callback,\n"
"the transaction identifier for that callback is no longer valid."
msgstr ""
"DDEML işlevine geçersiz hareket kimliği gönderilmiş.\n"
"Uygulama XTYP_XACT_COMPLETE çağrısından döndüğünde\n"
"bu çağrının hareket kimliği geçersiz olacak."

#: ../src/common/zipstrm.cpp:1483
msgid "assuming this is a multi-part zip concatenated"
msgstr "bunun çok parçalı birleştirilmiş bir zip olduğu varsayılıyor"

#: ../src/common/fileconf.cpp:1847
#, c-format
msgid "attempt to change immutable key '%s' ignored."
msgstr "'%s' değişmez anahtarını değiştirme denemesi yok sayıldı."

#: ../src/html/chm.cpp:329
msgid "bad arguments to library function"
msgstr "kitaplık işlevi için hatalı değişkenler"

#: ../src/html/chm.cpp:341
msgid "bad signature"
msgstr "imza kötü"

#: ../src/common/zipstrm.cpp:1918
msgid "bad zipfile offset to entry"
msgstr "kayıt için hatalı zip dosyası konumu"

#: ../src/common/ftp.cpp:403
msgid "binary"
msgstr "ikili"

#: ../src/common/fontcmn.cpp:996
msgid "bold"
msgstr "koyu"

#: ../src/msw/utils.cpp:1144
#, c-format
msgid "build %lu"
msgstr "yapım %lu"

#: ../src/common/ffile.cpp:75
#, c-format
msgid "can't close file '%s'"
msgstr "'%s' dosyası kapatılamıyor"

#: ../src/common/file.cpp:245
#, c-format
msgid "can't close file descriptor %d"
msgstr "%d dosya tanımlayıcısı kapatılamıyor"

#: ../src/common/file.cpp:586
#, c-format
msgid "can't commit changes to file '%s'"
msgstr "'%s' dosyasındaki değişiklikler işlenemiyor"

#: ../src/common/file.cpp:178
#, c-format
msgid "can't create file '%s'"
msgstr "'%s' dosyası oluşturulamıyor"

#: ../src/common/fileconf.cpp:1141
#, c-format
msgid "can't delete user configuration file '%s'"
msgstr "kullanıcı yapılandırma dosyası '%s' silinemiyor"

#: ../src/common/file.cpp:495
#, c-format
msgid "can't determine if the end of file is reached on descriptor %d"
msgstr ""
"%d tanımlayıcısı üstündeki dosyanın sonuna ulaşılıp ulaşılamadığı "
"belirlenemiyor"

#: ../src/common/zipstrm.cpp:1692
msgid "can't find central directory in zip"
msgstr "zip içinde merkez klasör bulunamıyor"

#: ../src/common/file.cpp:465
#, c-format
msgid "can't find length of file on file descriptor %d"
msgstr "%d tanımlayıcısı üstündeki dosyanın uzunluğu bulunamıyor"

#: ../src/msw/utils.cpp:341
msgid "can't find user's HOME, using current directory."
msgstr "kullanıcının klasörü bulunamadığından geçerli klasör kullanılıyor."

#: ../src/common/file.cpp:366
#, c-format
msgid "can't flush file descriptor %d"
msgstr "%d dosya tanımlayıcısı temizlenemiyor"

#: ../src/common/file.cpp:422
#, c-format
msgid "can't get seek position on file descriptor %d"
msgstr "%d dosya tanımlayıcısı üstündeki arama konumu alınamıyor"

#: ../src/common/fontmap.cpp:325
msgid "can't load any font, aborting"
msgstr "herhangi bir yazı türü yüklenemedi, vazgeçiliyor"

#: ../src/common/file.cpp:231 ../src/common/ffile.cpp:59
#, c-format
msgid "can't open file '%s'"
msgstr "'%s' dosyası açılamıyor"

#: ../src/common/fileconf.cpp:320
#, c-format
msgid "can't open global configuration file '%s'."
msgstr "'%s' genel ayar dosyası açılamıyor"

#: ../src/common/fileconf.cpp:336
#, c-format
msgid "can't open user configuration file '%s'."
msgstr "'%s' kullanıcı ayar dosyası açılamıyor"

#: ../src/common/fileconf.cpp:986
msgid "can't open user configuration file."
msgstr "kullanıcı ayar dosyası açılamıyor."

#: ../src/common/zipstrm.cpp:579
msgid "can't re-initialize zlib deflate stream"
msgstr "zlib ayıklama akışı yeniden başlatılamadı"

#: ../src/common/zipstrm.cpp:604
msgid "can't re-initialize zlib inflate stream"
msgstr "zlib sıkıştırma akışı yeniden başlatılamadı"

#: ../src/common/file.cpp:304
#, c-format
msgid "can't read from file descriptor %d"
msgstr "%d dosya tanımlayıcısından okunamıyor"

#: ../src/common/file.cpp:581
#, c-format
msgid "can't remove file '%s'"
msgstr "'%s' dosyası silinemedi"

#: ../src/common/file.cpp:598
#, c-format
msgid "can't remove temporary file '%s'"
msgstr "'%s' geçici dosyası silinemedi"

#: ../src/common/file.cpp:408
#, c-format
msgid "can't seek on file descriptor %d"
msgstr "%d dosya tanımlayıcısı üzerinde arama yapılamıyor"

#: ../src/common/textfile.cpp:273
#, c-format
msgid "can't write buffer '%s' to disk."
msgstr "'%s' ara belleği diske yazılamadı."

#: ../src/common/file.cpp:323
#, c-format
msgid "can't write to file descriptor %d"
msgstr "%d dosya tanımlayıcısına yazılamıyor"

#: ../src/common/fileconf.cpp:1000
msgid "can't write user configuration file."
msgstr "kullanıcı ayar dosyası yazılamadı."

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:482 ../src/generic/datavgen.cpp:1261
msgid "checked"
msgstr "doğrulandı"

#: ../src/html/chm.cpp:345
msgid "checksum error"
msgstr "sağlama sorunu"

#: ../src/common/tarstrm.cpp:820
msgid "checksum failure reading tar header block"
msgstr "tar başlık bloğu okunurken sağlama sorunu"

#: ../src/richtext/richtextbackgroundpage.cpp:226
#: ../src/richtext/richtextbackgroundpage.cpp:249
#: ../src/richtext/richtextbackgroundpage.cpp:289
#: ../src/richtext/richtextbackgroundpage.cpp:316
#: ../src/richtext/richtextborderspage.cpp:254
#: ../src/richtext/richtextborderspage.cpp:288
#: ../src/richtext/richtextborderspage.cpp:322
#: ../src/richtext/richtextborderspage.cpp:356
#: ../src/richtext/richtextborderspage.cpp:422
#: ../src/richtext/richtextborderspage.cpp:456
#: ../src/richtext/richtextborderspage.cpp:490
#: ../src/richtext/richtextborderspage.cpp:524
#: ../src/richtext/richtextborderspage.cpp:592
#: ../src/richtext/richtextmarginspage.cpp:201
#: ../src/richtext/richtextmarginspage.cpp:226
#: ../src/richtext/richtextmarginspage.cpp:249
#: ../src/richtext/richtextmarginspage.cpp:274
#: ../src/richtext/richtextmarginspage.cpp:315
#: ../src/richtext/richtextmarginspage.cpp:340
#: ../src/richtext/richtextmarginspage.cpp:363
#: ../src/richtext/richtextmarginspage.cpp:388
#: ../src/richtext/richtextsizepage.cpp:339
#: ../src/richtext/richtextsizepage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:400
#: ../src/richtext/richtextsizepage.cpp:427
#: ../src/richtext/richtextsizepage.cpp:454
#: ../src/richtext/richtextsizepage.cpp:481
#: ../src/richtext/richtextsizepage.cpp:555
#: ../src/richtext/richtextsizepage.cpp:590
#: ../src/richtext/richtextsizepage.cpp:625
#: ../src/richtext/richtextsizepage.cpp:660
msgid "cm"
msgstr "cm"

#: ../src/html/chm.cpp:347
msgid "compression error"
msgstr "sıkıştırma sorunu"

#: ../src/common/regex.cpp:236
msgid "conversion to 8-bit encoding failed"
msgstr "8-bit kodlama dönüşümü yapılamadı"

#: ../src/common/accelcmn.cpp:187
msgid "ctrl"
msgstr "ctrl"

#: ../src/common/cmdline.cpp:1500
msgid "date"
msgstr "tarih"

#: ../src/html/chm.cpp:349
msgid "decompression error"
msgstr "ayıklama sorunu"

#: ../src/common/cmdline.cpp:1496
msgid "double"
msgstr "çift"

#: ../src/common/debugrpt.cpp:538
msgid "dump of the process state (binary)"
msgstr "işlem durum dökümü (ikili)"

#: ../src/common/datetimefmt.cpp:1969
msgid "eighteenth"
msgstr "onsekizinci"

#: ../src/common/datetimefmt.cpp:1959
msgid "eighth"
msgstr "sekizinci"

#: ../src/common/datetimefmt.cpp:1962
msgid "eleventh"
msgstr "onbirinci"

#: ../src/common/fileconf.cpp:1833
#, c-format
msgid "entry '%s' appears more than once in group '%s'"
msgstr "'%s' kaydı '%s' grubunda birden çok kez var"

#: ../src/html/chm.cpp:343
msgid "error in data format"
msgstr "veri biçimi sorunu"

#: ../src/html/chm.cpp:331
msgid "error opening file"
msgstr "dosya açma sorunu"

#: ../src/common/zipstrm.cpp:1778
msgid "error reading zip central directory"
msgstr "zip merkez klasörünü okuma sorunu"

#: ../src/common/zipstrm.cpp:1870
msgid "error reading zip local header"
msgstr "zip yerel başlığını okuma sorunu"

#: ../src/common/zipstrm.cpp:2531
#, c-format
msgid "error writing zip entry '%s': bad crc or length"
msgstr "'%s' zip kaydı yazma sorunu: hatalı CRC ya da uzunluk"

#: ../src/common/ffile.cpp:188
#, c-format
msgid "failed to flush the file '%s'"
msgstr "'%s' dosyası temizlenemedi"

#. TRANSLATORS: Name of Boolean false value
#: ../src/generic/datavgen.cpp:1030
msgid "false"
msgstr "yanlış"

#: ../src/common/datetimefmt.cpp:1966
msgid "fifteenth"
msgstr "onbeşinci"

#: ../src/common/datetimefmt.cpp:1956
msgid "fifth"
msgstr "beşinci"

#: ../src/common/fileconf.cpp:579
#, c-format
msgid "file '%s', line %zu: '%s' ignored after group header."
msgstr "dosya '%s', satır %zu: '%s' grup üst bilgisinden sonra yok sayıldı."

#: ../src/common/fileconf.cpp:608
#, c-format
msgid "file '%s', line %zu: '=' expected."
msgstr "dosya '%s', satır %zu: '=' bekleniyor."

#: ../src/common/fileconf.cpp:631
#, c-format
msgid "file '%s', line %zu: key '%s' was first found at line %d."
msgstr "dosya '%s', satır %zu: anahtar '%s' ilk olarak %d satırında bulundu."

#: ../src/common/fileconf.cpp:621
#, c-format
msgid "file '%s', line %zu: value for immutable key '%s' ignored."
msgstr "dosya '%s', satır %zu: '%s' değişmez anahtarı için değer yok sayıldı."

#: ../src/common/fileconf.cpp:543
#, c-format
msgid "file '%s': unexpected character %c at line %zu."
msgstr "dosya '%s': beklenmedik karakter %c, satır: %zu."

#: ../src/richtext/richtextbuffer.cpp:8738
msgid "files"
msgstr "dosyalar"

#: ../src/common/datetimefmt.cpp:1952
msgid "first"
msgstr "birinci"

#: ../src/html/helpwnd.cpp:1252
msgid "font size"
msgstr "yazı türü boyutu"

#: ../src/common/datetimefmt.cpp:1965
msgid "fourteenth"
msgstr "ondördüncü"

#: ../src/common/datetimefmt.cpp:1955
msgid "fourth"
msgstr "dördüncü"

#: ../src/common/appbase.cpp:783
msgid "generate verbose log messages"
msgstr "ayrıntılı günlük iletileri oluşturulsun"

#: ../src/richtext/richtextbuffer.cpp:13138
#: ../src/richtext/richtextbuffer.cpp:13248
msgid "image"
msgstr "görsel"

#: ../src/common/tarstrm.cpp:796
msgid "incomplete header block in tar"
msgstr "tar başlık bloğu eksik"

#: ../src/common/xtixml.cpp:489
msgid "incorrect event handler string, missing dot"
msgstr "hatalı olay işleyici dizgesi, nokta eksik"

#: ../src/common/tarstrm.cpp:1381
msgid "incorrect size given for tar entry"
msgstr "tar kaydının boyutu hatalı verilmiş"

#: ../src/common/tarstrm.cpp:993
msgid "invalid data in extended tar header"
msgstr "ek tar başlığında hatalı veri"

#: ../src/generic/logg.cpp:1030
msgid "invalid message box return value"
msgstr "geçersiz ileti penceresi sonuç değeri"

#: ../src/common/zipstrm.cpp:1647
msgid "invalid zip file"
msgstr "geçersiz zip dosyası"

#: ../src/common/fontcmn.cpp:1001
msgid "italic"
msgstr "yatık"

#: ../src/common/fontcmn.cpp:991
msgid "light"
msgstr "açık"

#: ../src/common/intl.cpp:303
#, c-format
msgid "locale '%s' cannot be set."
msgstr "'%s' yerel ayarları seçilemiyor."

#: ../src/common/datetimefmt.cpp:2125
msgid "midnight"
msgstr "gece yarısı"

#: ../src/common/datetimefmt.cpp:1970
msgid "nineteenth"
msgstr "ondokuzuncu"

#: ../src/common/datetimefmt.cpp:1960
msgid "ninth"
msgstr "dokuzuncu"

#: ../src/msw/dde.cpp:1116
msgid "no DDE error."
msgstr "DDE bulunamadı hatası."

#: ../src/html/chm.cpp:327
msgid "no error"
msgstr "hata yok"

#: ../src/dfb/fontmgr.cpp:174
#, c-format
msgid "no fonts found in %s, using builtin font"
msgstr "%s içinde yazı türü yok, içsel yazı türü kullanılıyor"

#: ../src/html/helpdata.cpp:657
msgid "noname"
msgstr "adsız"

#: ../src/common/datetimefmt.cpp:2124
msgid "noon"
msgstr "öğlen"

#: ../src/richtext/richtextstyles.cpp:779
msgid "normal"
msgstr "normal"

#: ../src/common/cmdline.cpp:1492
msgid "num"
msgstr "tamsayı"

#: ../src/common/xtixml.cpp:259
msgid "objects cannot have XML Text Nodes"
msgstr "nesnelerin XML Metin Düğümleri olamaz"

#: ../src/html/chm.cpp:339
msgid "out of memory"
msgstr "bellek yetersiz"

#: ../src/common/debugrpt.cpp:514
msgid "process context description"
msgstr "işlem bağlamı tanımı"

#: ../src/richtext/richtextbackgroundpage.cpp:227
#: ../src/richtext/richtextbackgroundpage.cpp:250
#: ../src/richtext/richtextbackgroundpage.cpp:290
#: ../src/richtext/richtextbackgroundpage.cpp:317
#: ../src/richtext/richtextfontpage.cpp:177
#: ../src/richtext/richtextfontpage.cpp:180
#: ../src/richtext/richtextborderspage.cpp:255
#: ../src/richtext/richtextborderspage.cpp:289
#: ../src/richtext/richtextborderspage.cpp:323
#: ../src/richtext/richtextborderspage.cpp:357
#: ../src/richtext/richtextborderspage.cpp:423
#: ../src/richtext/richtextborderspage.cpp:457
#: ../src/richtext/richtextborderspage.cpp:491
#: ../src/richtext/richtextborderspage.cpp:525
#: ../src/richtext/richtextborderspage.cpp:593
msgid "pt"
msgstr "punto"

#: ../src/richtext/richtextbackgroundpage.cpp:225
#: ../src/richtext/richtextbackgroundpage.cpp:228
#: ../src/richtext/richtextbackgroundpage.cpp:229
#: ../src/richtext/richtextbackgroundpage.cpp:248
#: ../src/richtext/richtextbackgroundpage.cpp:251
#: ../src/richtext/richtextbackgroundpage.cpp:252
#: ../src/richtext/richtextbackgroundpage.cpp:288
#: ../src/richtext/richtextbackgroundpage.cpp:291
#: ../src/richtext/richtextbackgroundpage.cpp:292
#: ../src/richtext/richtextbackgroundpage.cpp:315
#: ../src/richtext/richtextbackgroundpage.cpp:318
#: ../src/richtext/richtextbackgroundpage.cpp:319
#: ../src/richtext/richtextfontpage.cpp:178
#: ../src/richtext/richtextborderspage.cpp:253
#: ../src/richtext/richtextborderspage.cpp:256
#: ../src/richtext/richtextborderspage.cpp:257
#: ../src/richtext/richtextborderspage.cpp:287
#: ../src/richtext/richtextborderspage.cpp:290
#: ../src/richtext/richtextborderspage.cpp:291
#: ../src/richtext/richtextborderspage.cpp:321
#: ../src/richtext/richtextborderspage.cpp:324
#: ../src/richtext/richtextborderspage.cpp:325
#: ../src/richtext/richtextborderspage.cpp:355
#: ../src/richtext/richtextborderspage.cpp:358
#: ../src/richtext/richtextborderspage.cpp:359
#: ../src/richtext/richtextborderspage.cpp:421
#: ../src/richtext/richtextborderspage.cpp:424
#: ../src/richtext/richtextborderspage.cpp:425
#: ../src/richtext/richtextborderspage.cpp:455
#: ../src/richtext/richtextborderspage.cpp:458
#: ../src/richtext/richtextborderspage.cpp:459
#: ../src/richtext/richtextborderspage.cpp:489
#: ../src/richtext/richtextborderspage.cpp:492
#: ../src/richtext/richtextborderspage.cpp:493
#: ../src/richtext/richtextborderspage.cpp:523
#: ../src/richtext/richtextborderspage.cpp:526
#: ../src/richtext/richtextborderspage.cpp:527
#: ../src/richtext/richtextborderspage.cpp:591
#: ../src/richtext/richtextborderspage.cpp:594
#: ../src/richtext/richtextborderspage.cpp:595
#: ../src/richtext/richtextmarginspage.cpp:200
#: ../src/richtext/richtextmarginspage.cpp:202
#: ../src/richtext/richtextmarginspage.cpp:203
#: ../src/richtext/richtextmarginspage.cpp:225
#: ../src/richtext/richtextmarginspage.cpp:227
#: ../src/richtext/richtextmarginspage.cpp:228
#: ../src/richtext/richtextmarginspage.cpp:248
#: ../src/richtext/richtextmarginspage.cpp:250
#: ../src/richtext/richtextmarginspage.cpp:251
#: ../src/richtext/richtextmarginspage.cpp:273
#: ../src/richtext/richtextmarginspage.cpp:275
#: ../src/richtext/richtextmarginspage.cpp:276
#: ../src/richtext/richtextmarginspage.cpp:314
#: ../src/richtext/richtextmarginspage.cpp:316
#: ../src/richtext/richtextmarginspage.cpp:317
#: ../src/richtext/richtextmarginspage.cpp:339
#: ../src/richtext/richtextmarginspage.cpp:341
#: ../src/richtext/richtextmarginspage.cpp:342
#: ../src/richtext/richtextmarginspage.cpp:362
#: ../src/richtext/richtextmarginspage.cpp:364
#: ../src/richtext/richtextmarginspage.cpp:365
#: ../src/richtext/richtextmarginspage.cpp:387
#: ../src/richtext/richtextmarginspage.cpp:389
#: ../src/richtext/richtextmarginspage.cpp:390
#: ../src/richtext/richtextsizepage.cpp:338
#: ../src/richtext/richtextsizepage.cpp:341
#: ../src/richtext/richtextsizepage.cpp:342
#: ../src/richtext/richtextsizepage.cpp:372
#: ../src/richtext/richtextsizepage.cpp:375
#: ../src/richtext/richtextsizepage.cpp:376
#: ../src/richtext/richtextsizepage.cpp:399
#: ../src/richtext/richtextsizepage.cpp:402
#: ../src/richtext/richtextsizepage.cpp:403
#: ../src/richtext/richtextsizepage.cpp:426
#: ../src/richtext/richtextsizepage.cpp:429
#: ../src/richtext/richtextsizepage.cpp:430
#: ../src/richtext/richtextsizepage.cpp:453
#: ../src/richtext/richtextsizepage.cpp:456
#: ../src/richtext/richtextsizepage.cpp:457
#: ../src/richtext/richtextsizepage.cpp:480
#: ../src/richtext/richtextsizepage.cpp:483
#: ../src/richtext/richtextsizepage.cpp:484
#: ../src/richtext/richtextsizepage.cpp:554
#: ../src/richtext/richtextsizepage.cpp:557
#: ../src/richtext/richtextsizepage.cpp:558
#: ../src/richtext/richtextsizepage.cpp:589
#: ../src/richtext/richtextsizepage.cpp:592
#: ../src/richtext/richtextsizepage.cpp:593
#: ../src/richtext/richtextsizepage.cpp:624
#: ../src/richtext/richtextsizepage.cpp:627
#: ../src/richtext/richtextsizepage.cpp:628
#: ../src/richtext/richtextsizepage.cpp:659
#: ../src/richtext/richtextsizepage.cpp:662
#: ../src/richtext/richtextsizepage.cpp:663
msgid "px"
msgstr "piksel"

#: ../src/common/accelcmn.cpp:193
msgid "rawctrl"
msgstr "hamctrl"

#: ../src/html/chm.cpp:333
msgid "read error"
msgstr "okuma hatası"

#: ../src/common/zipstrm.cpp:2085
#, c-format
msgid "reading zip stream (entry %s): bad crc"
msgstr "zip akışı okuma (kayıt %s): CRC hatalı"

#: ../src/common/zipstrm.cpp:2080
#, c-format
msgid "reading zip stream (entry %s): bad length"
msgstr "zip akışı okuma (kayıt %s): uzunluk hatalı"

#: ../src/msw/dde.cpp:1159
msgid "reentrancy problem."
msgstr "yeniden giriş sorunu."

#: ../src/common/datetimefmt.cpp:1953
msgid "second"
msgstr "ikinci"

#: ../src/html/chm.cpp:337
msgid "seek error"
msgstr "arama hatası"

#: ../src/common/datetimefmt.cpp:1968
msgid "seventeenth"
msgstr "onyedinci"

#: ../src/common/datetimefmt.cpp:1958
msgid "seventh"
msgstr "yedinci"

#: ../src/common/accelcmn.cpp:191
msgid "shift"
msgstr "shift"

#: ../src/common/appbase.cpp:773
msgid "show this help message"
msgstr "bu yardım iletisi görüntülensin"

#: ../src/common/datetimefmt.cpp:1967
msgid "sixteenth"
msgstr "onaltıncı"

#: ../src/common/datetimefmt.cpp:1957
msgid "sixth"
msgstr "altıncı"

#: ../src/common/appcmn.cpp:234
msgid "specify display mode to use (e.g. 640x480-16)"
msgstr "kullanılacak görüntü kipini belirleyin (ör. 640x480-16)"

#: ../src/common/appcmn.cpp:220
msgid "specify the theme to use"
msgstr "kullanılacak temayı belirleyin"

#: ../src/richtext/richtextbuffer.cpp:9340
msgid "standard/circle"
msgstr "standart/daire"

#: ../src/richtext/richtextbuffer.cpp:9341
msgid "standard/circle-outline"
msgstr "standart/daire-çerçeve"

#: ../src/richtext/richtextbuffer.cpp:9343
msgid "standard/diamond"
msgstr "standart/elmas"

#: ../src/richtext/richtextbuffer.cpp:9342
msgid "standard/square"
msgstr "standart/kare"

#: ../src/richtext/richtextbuffer.cpp:9344
msgid "standard/triangle"
msgstr "standart/üçgen"

#: ../src/common/zipstrm.cpp:1985
msgid "stored file length not in Zip header"
msgstr "kayıtlı dosya uzunluğu Zip başlığında yok"

#: ../src/common/cmdline.cpp:1488
msgid "str"
msgstr "str"

#: ../src/common/fontcmn.cpp:982
msgid "strikethrough"
msgstr "üstü çizili"

#: ../src/common/tarstrm.cpp:1003 ../src/common/tarstrm.cpp:1025
#: ../src/common/tarstrm.cpp:1507 ../src/common/tarstrm.cpp:1529
msgid "tar entry not open"
msgstr "tar kaydı açık değil"

#: ../src/common/datetimefmt.cpp:1961
msgid "tenth"
msgstr "onuncu"

#: ../src/msw/dde.cpp:1123
msgid "the response to the transaction caused the DDE_FBUSY bit to be set."
msgstr "harekete yanıt DDE_FBUSY bayrak bitinin kaldırılmasına yol açtı."

#: ../src/common/datetimefmt.cpp:1954
msgid "third"
msgstr "üçüncü"

#: ../src/common/datetimefmt.cpp:1964
msgid "thirteenth"
msgstr "onüçüncü"

#: ../src/common/datetimefmt.cpp:1758
msgid "today"
msgstr "bugün"

#: ../src/common/datetimefmt.cpp:1760
msgid "tomorrow"
msgstr "yarın"

#: ../src/common/fileconf.cpp:1944
#, c-format
msgid "trailing backslash ignored in '%s'"
msgstr "'%s' sonundaki ters eğik çizgi yok sayıldı"

#: ../src/gtk/aboutdlg.cpp:218
msgid "translator-credits"
msgstr "çevirmenler"

#. TRANSLATORS: Name of Boolean true value
#: ../src/generic/datavgen.cpp:1028
msgid "true"
msgstr "doğru"

#: ../src/common/datetimefmt.cpp:1963
msgid "twelfth"
msgstr "yirminci"

#: ../src/common/datetimefmt.cpp:1971
msgid "twentieth"
msgstr "onikinci"

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:486 ../src/generic/datavgen.cpp:1263
msgid "unchecked"
msgstr "işaretlenmemiş"

#: ../src/common/fontcmn.cpp:802 ../src/common/fontcmn.cpp:978
msgid "underlined"
msgstr "altı çizili"

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:490
msgid "undetermined"
msgstr "belirlenmemiş"

#: ../src/common/fileconf.cpp:1979
#, c-format
msgid "unexpected \" at position %d in '%s'."
msgstr "%d konumunda, '%s' içinde beklenmeyen \"."

#: ../src/common/tarstrm.cpp:1045
msgid "unexpected end of file"
msgstr "beklenmeyen dosya sonu"

#: ../src/generic/progdlgg.cpp:370 ../src/common/tarstrm.cpp:371
#: ../src/common/tarstrm.cpp:394 ../src/common/tarstrm.cpp:425
msgid "unknown"
msgstr "bilinmiyor"

#: ../src/msw/registry.cpp:150
#, c-format
msgid "unknown (%lu)"
msgstr "bilinmiyor (%lu)"

#: ../src/common/xtixml.cpp:253
#, c-format
msgid "unknown class %s"
msgstr "bilinmeyen sınıf %s"

#: ../src/common/regex.cpp:258 ../src/html/chm.cpp:351
msgid "unknown error"
msgstr "bilinmeyen hata"

#: ../src/msw/dialup.cpp:471
#, c-format
msgid "unknown error (error code %08x)."
msgstr "bilinmeyen hata (hata kodu %08x)."

#: ../src/common/fmapbase.cpp:834
#, c-format
msgid "unknown-%d"
msgstr "bilinmeyen-%d"

#: ../src/common/docview.cpp:509
msgid "unnamed"
msgstr "adsız"

#: ../src/common/docview.cpp:1624
#, c-format
msgid "unnamed%d"
msgstr "adsız%d"

#: ../src/common/zipstrm.cpp:1999 ../src/common/zipstrm.cpp:2319
msgid "unsupported Zip compression method"
msgstr "desteklenmeyen Zip sıkıştırma yöntemi"

#: ../src/common/translation.cpp:1892
#, c-format
msgid "using catalog '%s' from '%s'."
msgstr "'%s' kataloğu '%s' üzerinden kullanılıyor."

#: ../src/html/chm.cpp:335
msgid "write error"
msgstr "yazma sorunu"

#: ../src/common/time.cpp:292
msgid "wxGetTimeOfDay failed."
msgstr "wxGetTimeOfDay başarısız."

#: ../src/motif/app.cpp:242
#, c-format
msgid "wxWidgets could not open display for '%s': exiting."
msgstr "wxWidgets '%s' için görünümü açamadı: çıkılıyor."

#: ../src/x11/app.cpp:170
msgid "wxWidgets could not open display. Exiting."
msgstr "wxWidgets görünümü açamadı. Çıkılıyor."

#: ../src/richtext/richtextsymboldlg.cpp:434
msgid "xxxx"
msgstr "xxxx"

#: ../src/common/datetimefmt.cpp:1759
msgid "yesterday"
msgstr "dün"

#: ../src/common/zstream.cpp:251 ../src/common/zstream.cpp:426
#, c-format
msgid "zlib error %d"
msgstr "zlib hatası %d"

#: ../src/richtext/richtextliststylepage.cpp:496
#: ../src/richtext/richtextbulletspage.cpp:288
msgid "~"
msgstr "~"