# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2018-03-14 15:32+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:39 msgid "Shape" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:46 msgid "Rectangular" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:50 xs/src/slic3r/GUI/Tab.cpp:1270 #: lib/Slic3r/GUI/Plater.pm:411 msgid "Size" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:51 msgid "Size in X and Y of the rectangular plate." msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:57 msgid "Origin" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:58 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:62 msgid "Circular" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:65 xs/src/libslic3r/PrintConfig.cpp:129 #: xs/src/libslic3r/PrintConfig.cpp:200 xs/src/libslic3r/PrintConfig.cpp:211 #: xs/src/libslic3r/PrintConfig.cpp:325 xs/src/libslic3r/PrintConfig.cpp:336 #: xs/src/libslic3r/PrintConfig.cpp:355 xs/src/libslic3r/PrintConfig.cpp:434 #: xs/src/libslic3r/PrintConfig.cpp:781 xs/src/libslic3r/PrintConfig.cpp:801 #: xs/src/libslic3r/PrintConfig.cpp:860 xs/src/libslic3r/PrintConfig.cpp:878 #: xs/src/libslic3r/PrintConfig.cpp:896 xs/src/libslic3r/PrintConfig.cpp:1051 #: xs/src/libslic3r/PrintConfig.cpp:1059 xs/src/libslic3r/PrintConfig.cpp:1101 #: xs/src/libslic3r/PrintConfig.cpp:1110 xs/src/libslic3r/PrintConfig.cpp:1120 #: xs/src/libslic3r/PrintConfig.cpp:1128 xs/src/libslic3r/PrintConfig.cpp:1136 #: xs/src/libslic3r/PrintConfig.cpp:1222 xs/src/libslic3r/PrintConfig.cpp:1428 #: xs/src/libslic3r/PrintConfig.cpp:1498 xs/src/libslic3r/PrintConfig.cpp:1534 #: xs/src/libslic3r/PrintConfig.cpp:1711 xs/src/libslic3r/PrintConfig.cpp:1718 #: xs/src/libslic3r/PrintConfig.cpp:1725 xs/src/libslic3r/PrintConfig.cpp:1734 #: xs/src/libslic3r/PrintConfig.cpp:1744 xs/src/libslic3r/PrintConfig.cpp:1754 msgid "mm" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:66 xs/src/libslic3r/PrintConfig.cpp:431 msgid "Diameter" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:67 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:71 #: xs/src/libslic3r/GCode/PreviewData.cpp:150 #: lib/Slic3r/GUI/Plater/3DPreview.pm:92 msgid "Custom" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:75 msgid "Load shape from STL..." msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:120 msgid "Settings" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:298 msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:315 msgid "Error! " msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:324 msgid "The selected file contains no geometry." msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.cpp:328 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: xs/src/slic3r/GUI/BedShapeDialog.hpp:42 msgid "Bed Shape" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:234 msgid "Array of language names and identifiers should have the same size." msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:245 msgid "Select the language" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:245 msgid "Language" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:312 xs/src/libslic3r/PrintConfig.cpp:170 msgid "Default" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:337 msgid "Change Application Language" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:344 msgid "Application will be restarted" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:344 msgid "Attention!" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:351 msgid "&Localization" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:494 lib/Slic3r/GUI/MainFrame.pm:465 #: lib/Slic3r/GUI/Plater.pm:1304 msgid "Error" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:499 msgid "Notice" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:504 msgid "GLUquadricObjPtr | Attempt to free unreferenced scalar" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:506 msgid "Warning" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:655 msgid "Support" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:658 msgid "Select what kind of support do you need" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:659 xs/src/libslic3r/GCode/PreviewData.cpp:137 msgid "None" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:660 xs/src/libslic3r/PrintConfig.cpp:1415 msgid "Support on build plate only" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:661 msgid "Everywhere" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:673 xs/src/slic3r/GUI/Tab.cpp:441 msgid "Brim" msgstr "" #: xs/src/slic3r/GUI/GUI.cpp:675 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:57 msgid "Save current " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:58 msgid "Delete this preset" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:383 msgid "Layers and perimeters" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:384 xs/src/libslic3r/PrintConfig.cpp:777 msgid "Layer height" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:388 msgid "Vertical shells" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:399 msgid "Horizontal shells" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:400 xs/src/libslic3r/PrintConfig.cpp:1321 msgid "Solid layers" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:405 msgid "Quality (slower slicing)" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:412 xs/src/slic3r/GUI/Tab.cpp:426 #: xs/src/slic3r/GUI/Tab.cpp:519 xs/src/slic3r/GUI/Tab.cpp:522 #: xs/src/slic3r/GUI/Tab.cpp:905 xs/src/slic3r/GUI/Tab.cpp:1191 #: xs/src/libslic3r/PrintConfig.cpp:107 xs/src/libslic3r/PrintConfig.cpp:208 #: xs/src/libslic3r/PrintConfig.cpp:736 xs/src/libslic3r/PrintConfig.cpp:1740 msgid "Advanced" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:416 xs/src/slic3r/GUI/Tab.cpp:417 #: xs/src/slic3r/GUI/Tab.cpp:735 xs/src/libslic3r/PrintConfig.cpp:87 #: xs/src/libslic3r/PrintConfig.cpp:247 xs/src/libslic3r/PrintConfig.cpp:488 #: xs/src/libslic3r/PrintConfig.cpp:502 xs/src/libslic3r/PrintConfig.cpp:540 #: xs/src/libslic3r/PrintConfig.cpp:681 xs/src/libslic3r/PrintConfig.cpp:691 #: xs/src/libslic3r/PrintConfig.cpp:709 xs/src/libslic3r/PrintConfig.cpp:727 #: xs/src/libslic3r/PrintConfig.cpp:746 xs/src/libslic3r/PrintConfig.cpp:1270 #: xs/src/libslic3r/PrintConfig.cpp:1287 msgid "Infill" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:422 msgid "Reducing printing time" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:434 msgid "Skirt and brim" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:435 xs/src/libslic3r/GCode/PreviewData.cpp:146 #: lib/Slic3r/GUI/Plater/3DPreview.pm:88 msgid "Skirt" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:444 xs/src/slic3r/GUI/Tab.cpp:445 #: xs/src/libslic3r/PrintConfig.cpp:191 xs/src/libslic3r/PrintConfig.cpp:1037 #: xs/src/libslic3r/PrintConfig.cpp:1387 xs/src/libslic3r/PrintConfig.cpp:1394 #: xs/src/libslic3r/PrintConfig.cpp:1406 xs/src/libslic3r/PrintConfig.cpp:1416 #: xs/src/libslic3r/PrintConfig.cpp:1424 xs/src/libslic3r/PrintConfig.cpp:1439 #: xs/src/libslic3r/PrintConfig.cpp:1460 xs/src/libslic3r/PrintConfig.cpp:1471 #: xs/src/libslic3r/PrintConfig.cpp:1487 xs/src/libslic3r/PrintConfig.cpp:1496 #: xs/src/libslic3r/PrintConfig.cpp:1505 xs/src/libslic3r/PrintConfig.cpp:1516 #: xs/src/libslic3r/PrintConfig.cpp:1532 xs/src/libslic3r/PrintConfig.cpp:1540 #: xs/src/libslic3r/PrintConfig.cpp:1541 xs/src/libslic3r/PrintConfig.cpp:1550 #: xs/src/libslic3r/PrintConfig.cpp:1558 xs/src/libslic3r/PrintConfig.cpp:1572 #: xs/src/libslic3r/GCode/PreviewData.cpp:147 #: lib/Slic3r/GUI/Plater/3DPreview.pm:89 msgid "Support material" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:450 msgid "Raft" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:454 msgid "Options for support material and raft" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:468 xs/src/libslic3r/PrintConfig.cpp:118 #: xs/src/libslic3r/PrintConfig.cpp:278 xs/src/libslic3r/PrintConfig.cpp:635 #: xs/src/libslic3r/PrintConfig.cpp:747 xs/src/libslic3r/PrintConfig.cpp:986 #: xs/src/libslic3r/PrintConfig.cpp:1208 xs/src/libslic3r/PrintConfig.cpp:1258 #: xs/src/libslic3r/PrintConfig.cpp:1309 xs/src/libslic3r/PrintConfig.cpp:1632 #: lib/Slic3r/GUI/Plater/3DPreview.pm:71 msgid "Speed" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:469 msgid "Speed for print moves" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:481 msgid "Speed for non-print moves" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:484 msgid "Modifiers" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:487 msgid "Acceleration control (advanced)" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:494 msgid "Autospeed (advanced)" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:500 msgid "Multiple Extruders" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:501 xs/src/slic3r/GUI/Tab.cpp:1040 #: xs/src/libslic3r/PrintConfig.cpp:308 xs/src/libslic3r/PrintConfig.cpp:702 #: xs/src/libslic3r/PrintConfig.cpp:965 xs/src/libslic3r/PrintConfig.cpp:1279 #: xs/src/libslic3r/PrintConfig.cpp:1452 xs/src/libslic3r/PrintConfig.cpp:1478 msgid "Extruders" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:508 msgid "Ooze prevention" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:512 xs/src/libslic3r/GCode/PreviewData.cpp:149 #: lib/Slic3r/GUI/Plater/3DPreview.pm:91 msgid "Wipe tower" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:523 msgid "Extrusion width" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:533 msgid "Overlap" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:536 msgid "Flow" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:539 msgid "Other" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:546 msgid "Output options" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:547 msgid "Sequential printing" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:549 msgid "Extruder clearance (mm)" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:558 msgid "Output file" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:564 xs/src/libslic3r/PrintConfig.cpp:1008 msgid "Post-processing scripts" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:570 xs/src/slic3r/GUI/Tab.cpp:571 #: xs/src/slic3r/GUI/Tab.cpp:933 xs/src/slic3r/GUI/Tab.cpp:934 #: xs/src/slic3r/GUI/Tab.cpp:1234 xs/src/slic3r/GUI/Tab.cpp:1235 msgid "Notes" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:577 xs/src/slic3r/GUI/Tab.cpp:941 msgid "Dependencies" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:578 xs/src/slic3r/GUI/Tab.cpp:942 msgid "Profile dependencies" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:579 xs/src/slic3r/GUI/Tab.cpp:943 #: xs/src/slic3r/GUI/Tab.cpp:1746 xs/src/libslic3r/PrintConfig.cpp:143 msgid "Compatible printers" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:603 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- no ensure_vertical_shell_thickness\n" "\n" "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:610 msgid "Spiral Vase" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:630 msgid "" "The Wipe Tower currently supports only:\n" "- first layer height 0.2mm\n" "- layer height from 0.15mm to 0.35mm\n" "\n" "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:634 xs/src/slic3r/GUI/Tab.cpp:656 #: xs/src/slic3r/GUI/Tab.cpp:673 msgid "Wipe Tower" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:652 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0).\n" "\n" "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:670 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers.\n" "\n" "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:688 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters\n" "\n" "Shall I adjust those settings for supports?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:691 msgid "Support Generator" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:733 msgid "The " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:733 #, possible-c-format msgid "" " infill pattern is not supposed to work at 100% density.\n" "\n" "Shall I switch to rectilinear fill pattern?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:860 xs/src/slic3r/GUI/Tab.cpp:861 #: lib/Slic3r/GUI/Plater.pm:368 msgid "Filament" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:868 msgid "Temperature " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:869 xs/src/slic3r/GUI/Tab.cpp:1313 #: xs/src/libslic3r/PrintConfig.cpp:307 msgid "Extruder" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:874 msgid "Bed" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:879 msgid "Cooling" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:880 xs/src/libslic3r/PrintConfig.cpp:929 #: xs/src/libslic3r/PrintConfig.cpp:1702 msgid "Enable" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:891 msgid "Fan settings" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:892 msgid "Fan speed" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:900 msgid "Cooling thresholds" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:906 msgid "Filament properties" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:910 msgid "Print speed override" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:920 xs/src/slic3r/GUI/Tab.cpp:1197 msgid "Custom G-code" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:921 xs/src/slic3r/GUI/Tab.cpp:1198 #: xs/src/libslic3r/PrintConfig.cpp:1349 xs/src/libslic3r/PrintConfig.cpp:1364 msgid "Start G-code" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:927 xs/src/slic3r/GUI/Tab.cpp:1204 #: xs/src/libslic3r/PrintConfig.cpp:217 xs/src/libslic3r/PrintConfig.cpp:227 msgid "End G-code" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1011 xs/src/slic3r/GUI/Preferences.cpp:11 msgid "General" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1012 msgid "Size and coordinates" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1014 xs/src/libslic3r/PrintConfig.cpp:34 msgid "Bed shape" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1016 xs/src/slic3r/GUI/Tab.cpp:1715 msgid " Set " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1036 msgid "Capabilities" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1041 msgid "Number of extruders of the printer." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1063 msgid "USB/Serial connection" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1064 xs/src/libslic3r/PrintConfig.cpp:1200 msgid "Serial port" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1069 msgid "Rescan serial ports" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1078 xs/src/slic3r/GUI/Tab.cpp:1125 msgid "Test" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1091 msgid "Connection to printer works correctly." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1091 xs/src/slic3r/GUI/Tab.cpp:1135 msgid "Success!" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1094 msgid "Connection failed." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1106 msgid "OctoPrint upload" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1109 xs/src/slic3r/GUI/Tab.cpp:1156 msgid " Browse " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1135 lib/Slic3r/GUI/MainFrame.pm:209 msgid "Connection to OctoPrint works correctly." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1138 msgid "Could not connect to OctoPrint" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1138 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1162 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1163 msgid "Open CA certificate file" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1177 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1188 msgid "Firmware" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1210 xs/src/libslic3r/PrintConfig.cpp:48 msgid "Before layer change G-code" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1216 xs/src/libslic3r/PrintConfig.cpp:766 msgid "After layer change G-code" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1222 xs/src/libslic3r/PrintConfig.cpp:1609 msgid "Tool change G-code" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1228 msgid "Between objects G-code (for sequential printing)" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1266 xs/src/libslic3r/GCode/PreviewData.cpp:400 #, possible-c-format msgid "Extruder %d" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1273 msgid "Layer height limits" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1278 msgid "Position (for multi-extruder printers)" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1281 msgid "Retraction" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1284 msgid "Only lift Z" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1297 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1301 lib/Slic3r/GUI/Plater.pm:150 #: lib/Slic3r/GUI/Plater.pm:2095 msgid "Preview" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1386 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1388 msgid "Firmware Retraction" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1547 msgid "Default " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1547 msgid " preset" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1548 msgid " preset\n" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1566 msgid "" "\n" "\n" "is not compatible with printer\n" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1566 msgid "" "\n" "\n" "and it has the following unsaved changes:" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1567 msgid "" "\n" "\n" "has the following unsaved changes:" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1569 msgid "" "\n" "\n" "Discard changes and continue anyway?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1570 msgid "Unsaved Changes" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1638 msgid "The supplied name is empty. It can't be saved." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1658 msgid "remove" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1658 msgid "delete" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1659 msgid "Are you sure you want to " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1659 msgid " the selected preset?" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1660 msgid "Remove" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1660 lib/Slic3r/GUI/Plater.pm:178 #: lib/Slic3r/GUI/Plater.pm:196 lib/Slic3r/GUI/Plater.pm:1991 msgid "Delete" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1661 msgid " Preset" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1714 msgid "All" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1745 msgid "Select the printers this profile is compatible with." msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1834 lib/Slic3r/GUI/MainFrame.pm:509 #: lib/Slic3r/GUI/Plater.pm:1615 msgid "Save " msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1834 msgid " as:" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1868 msgid "" "The supplied name is not valid; the following characters are not allowed:" msgstr "" #: xs/src/slic3r/GUI/Tab.cpp:1871 msgid "The supplied name is not available." msgstr "" #: xs/src/slic3r/GUI/Tab.hpp:185 msgid "Print Settings" msgstr "" #: xs/src/slic3r/GUI/Tab.hpp:205 msgid "Filament Settings" msgstr "" #: xs/src/slic3r/GUI/Tab.hpp:226 msgid "Printer Settings" msgstr "" #: xs/src/slic3r/GUI/Tab.hpp:240 msgid "Save preset" msgstr "" #: xs/src/slic3r/GUI/Field.cpp:59 msgid "default" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:27 #, possible-c-format msgid "" "If estimated layer time is below ~%ds, fan will run at %d%% and print speed " "will be reduced so that no less than %ds are spent on that layer (however, " "speed will never be reduced below %dmm/s)." msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:31 #, possible-c-format msgid "" "\n" "If estimated layer time is greater, but still below ~%ds, fan will run at a " "proportionally decreasing speed between %d%% and %d%%." msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:35 msgid "" "\n" "During the other layers, fan " msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:37 msgid "Fan " msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:42 #, possible-c-format msgid "will always run at %d%% " msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:45 #, possible-c-format msgid "except for the first %d layers" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:49 msgid "except for the first layer" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:51 msgid "will be turned off." msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:152 msgid "external perimeters" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:161 msgid "perimeters" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:170 msgid "infill" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:180 msgid "solid infill" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:188 msgid "top solid infill" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:199 msgid "support" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:209 msgid "support interface" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:215 msgid "First layer volumetric" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:215 msgid "Bridging volumetric" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:215 msgid "Volumetric" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:216 msgid " flow rate is maximized " msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:219 msgid "by the print profile maximum" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:220 msgid "when printing " msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:221 msgid " with a volumetric rate " msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:225 #, possible-c-format msgid "%3.2f mm³/s" msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:227 #, possible-c-format msgid " at filament speed %3.2f mm/s." msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:246 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:263 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and " msgstr "" #: xs/src/slic3r/GUI/PresetHints.cpp:270 #, possible-c-format msgid "%d lines: %.2lf mm" msgstr "" #: xs/src/slic3r/GUI/Preferences.hpp:17 msgid "Preferences" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:27 msgid "Remember output directory" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:29 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:35 msgid "Auto-center parts" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:37 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:43 msgid "Background processing" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:45 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:51 msgid "Disable USB/serial connection" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:53 msgid "" "Disable communication with the printer over a serial / USB cable. This " "simplifies the user interface in case the printer is never attached to the " "computer." msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:59 msgid "Suppress \" - default - \" presets" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:61 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:67 msgid "Show incompatible print and filament presets" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:69 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:75 msgid "Use legacy OpenGL 1.1 rendering" msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:77 msgid "" "If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may " "try to check this checkbox. This will disable the layer height editing and " "anti aliasing, so it is likely better to upgrade your graphics driver." msgstr "" #: xs/src/slic3r/GUI/Preferences.cpp:101 msgid "You need to restart Slic3r to make the changes effective." msgstr "" #: xs/src/slic3r/GUI/BonjourDialog.cpp:53 msgid "Network lookup" msgstr "" #: xs/src/slic3r/GUI/BonjourDialog.cpp:66 msgid "Address" msgstr "" #: xs/src/slic3r/GUI/BonjourDialog.cpp:67 msgid "Hostname" msgstr "" #: xs/src/slic3r/GUI/BonjourDialog.cpp:68 msgid "Service name" msgstr "" #: xs/src/slic3r/GUI/BonjourDialog.cpp:69 msgid "OctoPrint version" msgstr "" #: xs/src/slic3r/GUI/BonjourDialog.cpp:187 msgid "Searching for devices" msgstr "" #: xs/src/slic3r/GUI/BonjourDialog.cpp:194 msgid "Finished." msgstr "" #: xs/src/slic3r/Utils/OctoPrint.cpp:53 msgid "G-code file successfully uploaded to the OctoPrint server" msgstr "" #: xs/src/slic3r/Utils/OctoPrint.cpp:67 msgid "Error while uploading to the OctoPrint server" msgstr "" #: xs/src/slic3r/Utils/OctoPrint.cpp:102 msgid "Invalid API key" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:26 msgid "Avoid crossing perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:27 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:38 xs/src/libslic3r/PrintConfig.cpp:1579 msgid "Other layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:39 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:42 msgid "Bed temperature" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:49 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:59 msgid "Between objects G-code" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:60 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:68 lib/Slic3r/GUI/MainFrame.pm:364 msgid "Bottom" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:69 xs/src/libslic3r/PrintConfig.cpp:239 #: xs/src/libslic3r/PrintConfig.cpp:290 xs/src/libslic3r/PrintConfig.cpp:298 #: xs/src/libslic3r/PrintConfig.cpp:604 xs/src/libslic3r/PrintConfig.cpp:762 #: xs/src/libslic3r/PrintConfig.cpp:778 xs/src/libslic3r/PrintConfig.cpp:948 #: xs/src/libslic3r/PrintConfig.cpp:996 xs/src/libslic3r/PrintConfig.cpp:1159 #: xs/src/libslic3r/PrintConfig.cpp:1590 xs/src/libslic3r/PrintConfig.cpp:1646 msgid "Layers and Perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:70 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:72 msgid "Bottom solid layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:77 msgid "Bridge" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:78 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:80 xs/src/libslic3r/PrintConfig.cpp:174 #: xs/src/libslic3r/PrintConfig.cpp:576 xs/src/libslic3r/PrintConfig.cpp:684 #: xs/src/libslic3r/PrintConfig.cpp:959 msgid "mm/s²" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:86 msgid "Bridging angle" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:88 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:91 xs/src/libslic3r/PrintConfig.cpp:492 #: xs/src/libslic3r/PrintConfig.cpp:1177 xs/src/libslic3r/PrintConfig.cpp:1188 #: xs/src/libslic3r/PrintConfig.cpp:1408 xs/src/libslic3r/PrintConfig.cpp:1564 msgid "°" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:97 msgid "Bridges fan speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:98 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:99 xs/src/libslic3r/PrintConfig.cpp:504 #: xs/src/libslic3r/PrintConfig.cpp:789 xs/src/libslic3r/PrintConfig.cpp:850 #: xs/src/libslic3r/PrintConfig.cpp:1067 msgid "%" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:106 msgid "Bridge flow ratio" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:108 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:117 msgid "Bridges" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:119 msgid "Speed for printing bridges." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:120 xs/src/libslic3r/PrintConfig.cpp:638 #: xs/src/libslic3r/PrintConfig.cpp:749 xs/src/libslic3r/PrintConfig.cpp:811 #: xs/src/libslic3r/PrintConfig.cpp:868 xs/src/libslic3r/PrintConfig.cpp:988 #: xs/src/libslic3r/PrintConfig.cpp:1144 xs/src/libslic3r/PrintConfig.cpp:1153 #: xs/src/libslic3r/PrintConfig.cpp:1543 xs/src/libslic3r/PrintConfig.cpp:1656 msgid "mm/s" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:127 msgid "Brim width" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:128 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:135 msgid "Clip multi-part objects" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:136 msgid "" "When printing multi-material objects, this settings will make slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:147 msgid "Compatible printers condition" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:148 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:154 msgid "Complete individual objects" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:155 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:163 msgid "Enable auto cooling" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:164 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:171 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:180 msgid "Disable fan for the first" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:181 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:183 xs/src/libslic3r/PrintConfig.cpp:694 #: xs/src/libslic3r/PrintConfig.cpp:1040 xs/src/libslic3r/PrintConfig.cpp:1231 #: xs/src/libslic3r/PrintConfig.cpp:1292 xs/src/libslic3r/PrintConfig.cpp:1444 #: xs/src/libslic3r/PrintConfig.cpp:1489 msgid "layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:190 msgid "Don't support bridges" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:192 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:198 msgid "Distance between copies" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:199 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:207 msgid "Elephant foot compensation" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:209 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:218 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all Slic3r settings." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:228 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode. Note that you can use placeholder variables for all " "Slic3r settings. If you have multiple extruders, the gcode is processed in " "extruder order." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:238 msgid "Ensure vertical shell thickness" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:240 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:246 msgid "Top/bottom fill pattern" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:248 msgid "" "Fill pattern for top/bottom infill. This only affects the external visible " "layer, and not its adjacent solid shells." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:267 xs/src/libslic3r/PrintConfig.cpp:277 msgid "External perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:268 xs/src/libslic3r/PrintConfig.cpp:377 #: xs/src/libslic3r/PrintConfig.cpp:592 xs/src/libslic3r/PrintConfig.cpp:710 #: xs/src/libslic3r/PrintConfig.cpp:974 xs/src/libslic3r/PrintConfig.cpp:1299 #: xs/src/libslic3r/PrintConfig.cpp:1461 xs/src/libslic3r/PrintConfig.cpp:1621 msgid "Extrusion Width" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:269 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:272 xs/src/libslic3r/PrintConfig.cpp:597 #: xs/src/libslic3r/PrintConfig.cpp:715 xs/src/libslic3r/PrintConfig.cpp:979 #: xs/src/libslic3r/PrintConfig.cpp:1303 xs/src/libslic3r/PrintConfig.cpp:1465 #: xs/src/libslic3r/PrintConfig.cpp:1626 msgid "mm or % (leave 0 for default)" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:279 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:282 xs/src/libslic3r/PrintConfig.cpp:619 #: xs/src/libslic3r/PrintConfig.cpp:1262 xs/src/libslic3r/PrintConfig.cpp:1313 #: xs/src/libslic3r/PrintConfig.cpp:1508 xs/src/libslic3r/PrintConfig.cpp:1638 msgid "mm/s or %" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:289 msgid "External perimeters first" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:291 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:297 msgid "Extra perimeters if needed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:299 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:309 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:320 lib/Slic3r/GUI/Plater/3DPreview.pm:69 msgid "Height" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:321 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:331 msgid "Radius" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:332 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:342 msgid "Extruder Color" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:343 xs/src/libslic3r/PrintConfig.cpp:406 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:350 msgid "Extruder offset" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:351 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:360 msgid "Extrusion axis" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:361 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:367 msgid "Extrusion multiplier" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:368 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:376 msgid "Default extrusion width" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:378 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:382 msgid "mm or % (leave 0 for auto)" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:387 msgid "Keep fan always on" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:388 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:394 msgid "Enable fan if layer print time is below" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:395 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:397 xs/src/libslic3r/PrintConfig.cpp:1249 msgid "approximate seconds" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:405 msgid "Color" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:412 msgid "Filament notes" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:413 msgid "You can put your notes regarding the filament here." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:421 xs/src/libslic3r/PrintConfig.cpp:817 msgid "Max volumetric speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:422 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:425 xs/src/libslic3r/PrintConfig.cpp:820 msgid "mm³/s" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:432 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:440 msgid "Density" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:441 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:444 msgid "g/cm³" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:450 msgid "Filament type" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:451 xs/src/libslic3r/PrintConfig.cpp:1009 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:470 msgid "Soluble material" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:471 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:476 lib/Slic3r/GUI/Plater.pm:453 msgid "Cost" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:477 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:478 msgid "money/kg" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:487 msgid "Fill angle" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:489 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:501 msgid "Fill density" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:503 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:539 msgid "Fill pattern" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:541 msgid "Fill pattern for general low-density infill." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:573 xs/src/libslic3r/PrintConfig.cpp:582 #: xs/src/libslic3r/PrintConfig.cpp:591 xs/src/libslic3r/PrintConfig.cpp:625 msgid "First layer" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:574 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:583 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:593 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:603 msgid "First layer height" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:605 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:609 xs/src/libslic3r/PrintConfig.cpp:740 #: xs/src/libslic3r/PrintConfig.cpp:1397 msgid "mm or %" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:615 msgid "First layer speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:616 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:626 msgid "" "Extruder temperature for first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output file." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:634 #: xs/src/libslic3r/GCode/PreviewData.cpp:145 #: lib/Slic3r/GUI/Plater/3DPreview.pm:87 msgid "Gap fill" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:636 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:644 msgid "Verbose G-code" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:645 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:652 msgid "G-code flavor" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:653 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents Slic3r from exporting any " "extrusion value at all." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:682 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:690 msgid "Combine infill every" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:692 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:696 msgid "Combine infill every n layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:701 msgid "Infill extruder" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:703 msgid "The extruder to use when printing infill." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:711 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:720 msgid "Infill before perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:721 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:726 msgid "Only infill where needed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:728 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:735 msgid "Infill/perimeters overlap" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:737 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:748 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:757 msgid "Interface shells" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:758 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:767 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:779 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:787 xs/src/libslic3r/PrintConfig.cpp:796 msgid "Max" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:788 msgid "This setting represents the maximum speed of your fan." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:797 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:807 msgid "Max print speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:808 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:818 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:826 msgid "Max volumetric slope positive" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:827 xs/src/libslic3r/PrintConfig.cpp:838 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:831 xs/src/libslic3r/PrintConfig.cpp:842 msgid "mm³/s²" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:837 msgid "Max volumetric slope negative" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:848 xs/src/libslic3r/PrintConfig.cpp:857 msgid "Min" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:849 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:858 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:866 msgid "Min print speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:867 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:874 msgid "Minimum extrusion length" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:875 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:884 msgid "Configuration notes" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:885 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:894 msgid "Nozzle diameter" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:895 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:901 msgid "API Key" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:902 msgid "" "Slic3r can upload G-code files to OctoPrint. This field should contain the " "API Key required for authentication." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:915 msgid "Hostname, IP or URL" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:916 msgid "" "Slic3r can upload G-code files to OctoPrint. This field should contain the " "hostname, IP address or URL of the OctoPrint instance." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:922 msgid "Only retract when crossing perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:923 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:930 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:937 msgid "Output filename format" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:938 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:947 msgid "Detect bridging perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:949 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:955 xs/src/libslic3r/PrintConfig.cpp:973 #: xs/src/libslic3r/PrintConfig.cpp:985 xs/src/libslic3r/PrintConfig.cpp:995 msgid "Perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:956 msgid "" "This is the acceleration your printer will use for perimeters. A high value " "like 9000 usually gives good results if your hardware is up to the job. Set " "zero to disable acceleration control for perimeters." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:964 msgid "Perimeter extruder" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:966 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:975 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:987 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:997 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1001 msgid "(minimum)" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1021 msgid "Printer notes" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1022 msgid "You can put your notes regarding the printer here." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1036 msgid "Raft layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1038 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1046 msgid "Resolution" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1047 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1057 msgid "Minimum travel after retraction" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1058 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1064 msgid "Retract amount before wipe" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1065 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1072 msgid "Retract on layer change" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1073 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1078 xs/src/libslic3r/PrintConfig.cpp:1087 msgid "Length" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1079 msgid "Retraction Length" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1080 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1082 xs/src/libslic3r/PrintConfig.cpp:1092 msgid "mm (zero to disable)" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1088 msgid "Retraction Length (Toolchange)" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1089 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1097 msgid "Lift Z" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1098 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1106 msgid "Above Z" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1107 msgid "Only lift Z above" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1108 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1115 msgid "Below Z" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1116 msgid "Only lift Z below" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1117 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1125 xs/src/libslic3r/PrintConfig.cpp:1133 msgid "Extra length on restart" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1126 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1134 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1141 xs/src/libslic3r/PrintConfig.cpp:1142 msgid "Retraction Speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1143 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1149 xs/src/libslic3r/PrintConfig.cpp:1150 msgid "Deretraction Speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1151 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1158 msgid "Seam position" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1160 msgid "Position of perimeters starting points." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1176 msgid "Direction" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1178 msgid "Preferred direction of the seam" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1179 msgid "Seam preferred direction" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1187 msgid "Jitter" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1189 msgid "Seam preferred direction jitter" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1190 msgid "Preferred direction of the seam - jitter" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1201 msgid "USB/serial port for printer connection." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1209 msgid "Serial port speed" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1210 msgid "Speed (baud) of USB/serial port for printer connection." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1219 msgid "Distance from object" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1220 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1228 msgid "Skirt height" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1229 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1236 msgid "Loops (minimum)" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1237 msgid "Skirt Loops" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1238 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1246 msgid "Slow down if layer print time is below" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1247 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1257 msgid "Small perimeters" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1259 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1269 msgid "Solid infill threshold area" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1271 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1272 msgid "mm²" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1278 msgid "Solid infill extruder" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1280 msgid "The extruder to use when printing solid infill." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1286 msgid "Solid infill every" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1288 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1298 xs/src/libslic3r/PrintConfig.cpp:1308 #: xs/src/libslic3r/GCode/PreviewData.cpp:142 #: lib/Slic3r/GUI/Plater/3DPreview.pm:84 msgid "Solid infill" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1300 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1310 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1322 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1329 msgid "Spiral vase" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1330 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1339 msgid "Temperature variation" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1340 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1350 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If Slic3r detects M104 or M190 in your custom codes, " "such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all Slic3r settings, so you can put a " "\"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1365 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode. This is used to override settings for a specific filament. If Slic3r " "detects M104, M109, M140 or M190 in your custom codes, such commands will " "not be prepended automatically so you're free to customize the order of " "heating commands and other custom actions. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1380 msgid "Single Extruder Multi Material" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1381 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1386 msgid "Generate support material" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1388 msgid "Enable support material generation." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1393 msgid "XY separation between an object and its support" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1395 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1405 msgid "Pattern angle" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1407 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1417 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1423 msgid "Contact Z distance" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1425 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1438 msgid "Enforce support for the first" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1440 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1446 msgid "Enforce support for the first n layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1451 msgid "Support material/raft/skirt extruder" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1453 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1462 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1470 msgid "Interface loops" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1472 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1477 msgid "Support material/raft interface extruder" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1479 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1486 msgid "Interface layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1488 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1495 msgid "Interface pattern spacing" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1497 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1504 #: xs/src/libslic3r/GCode/PreviewData.cpp:148 #: lib/Slic3r/GUI/Plater/3DPreview.pm:90 msgid "Support material interface" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1506 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1515 msgid "Pattern" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1517 msgid "Pattern used to generate support material." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1531 msgid "Pattern spacing" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1533 msgid "Spacing between support material lines." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1542 msgid "Speed for printing support material." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1549 msgid "Synchronize with object layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1551 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1557 msgid "Overhang threshold" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1559 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1571 msgid "With sheath around the support" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1573 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1580 msgid "" "Extruder temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1583 msgid "Temperature" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1589 msgid "Detect thin walls" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1591 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1597 msgid "Threads" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1598 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1610 msgid "" "This custom code is inserted right before every extruder change. Note that " "you can use placeholder variables for all Slic3r settings as well as " "[previous_extruder] and [next_extruder]." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1620 xs/src/libslic3r/PrintConfig.cpp:1631 #: xs/src/libslic3r/GCode/PreviewData.cpp:143 #: lib/Slic3r/GUI/Plater/3DPreview.pm:85 msgid "Top solid infill" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1622 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1633 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1645 lib/Slic3r/GUI/MainFrame.pm:363 msgid "Top" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1647 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1649 msgid "Top solid layers" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1654 lib/Slic3r/GUI/Plater/3DPreview.pm:95 msgid "Travel" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1655 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1663 msgid "Use firmware retraction" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1664 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1670 msgid "Use relative E distances" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1671 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1677 msgid "Use volumetric E" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1678 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1688 msgid "Enable variable layer height feature" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1689 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1695 msgid "Wipe while retracting" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1696 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1703 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1709 msgid "Position X" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1710 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1716 msgid "Position Y" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1717 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1723 lib/Slic3r/GUI/Plater/3DPreview.pm:70 msgid "Width" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1724 msgid "Width of a wipe tower" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1730 msgid "Per color change depth" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1731 msgid "" "Depth of a wipe color per color change. For N colors, there will be maximum " "(N-1) tool switches performed, therefore the total depth of the wipe tower " "will be (N-1) times this value." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1739 msgid "XY Size Compensation" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1741 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1749 msgid "Z offset" msgstr "" #: xs/src/libslic3r/PrintConfig.cpp:1750 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:138 #: lib/Slic3r/GUI/Plater/3DPreview.pm:80 msgid "Perimeter" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:139 #: lib/Slic3r/GUI/Plater/3DPreview.pm:81 msgid "External perimeter" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:140 #: lib/Slic3r/GUI/Plater/3DPreview.pm:82 msgid "Overhang perimeter" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:141 #: lib/Slic3r/GUI/Plater/3DPreview.pm:83 msgid "Internal infill" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:144 #: lib/Slic3r/GUI/Plater/3DPreview.pm:86 msgid "Bridge infill" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:151 msgid "Mixed" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:330 #: lib/Slic3r/GUI/Plater/3DPreview.pm:68 msgid "Feature type" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:332 msgid "Height (mm)" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:334 msgid "Width (mm)" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:336 msgid "Speed (mm/s)" msgstr "" #: xs/src/libslic3r/GCode/PreviewData.cpp:338 #: lib/Slic3r/GUI/Plater/3DPreview.pm:72 msgid "Tool" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:66 msgid "Version " msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:66 msgid "" " - Remember to check for updates at http://github.com/prusa3d/slic3r/releases" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:118 msgid "Plater" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:120 msgid "Controller" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:191 msgid "No Bonjour device found" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:191 msgid "Device Browser" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:212 msgid "I wasn't able to connect to OctoPrint (" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:213 msgid "). Check hostname and OctoPrint version (at least 1.1.0 is required)." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:245 msgid "Open STL/OBJ/AMF…\tCtrl+O" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:245 msgid "Open a model" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:248 msgid "&Load Config…\tCtrl+L" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:248 msgid "Load exported configuration file" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:251 msgid "&Export Config…\tCtrl+E" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:251 msgid "Export current configuration to file" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:254 msgid "&Load Config Bundle…" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:254 msgid "Load presets from a bundle" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:257 msgid "&Export Config Bundle…" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:257 msgid "Export all presets to file" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:262 msgid "Q&uick Slice…\tCtrl+U" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:262 msgid "Slice a file into a G-code" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:268 msgid "Quick Slice and Save &As…\tCtrl+Alt+U" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:268 msgid "Slice a file into a G-code, save as" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:274 msgid "&Repeat Last Quick Slice\tCtrl+Shift+U" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:274 msgid "Repeat last quick slice" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:281 msgid "Slice to SV&G…\tCtrl+G" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:281 msgid "Slice file to a multi-layer SVG" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:285 msgid "(&Re)Slice Now\tCtrl+S" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:285 msgid "Start new slicing process" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:288 msgid "Repair STL file…" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:288 msgid "Automatically repair an STL file" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:293 msgid "Preferences…\tCtrl+," msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:293 msgid "Application preferences" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:298 msgid "&Quit" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:298 msgid "Quit Slic3r" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:308 msgid "Export G-code..." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:308 msgid "Export current plate as G-code" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:311 msgid "Export plate as STL..." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:311 msgid "Export current plate as STL" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:314 msgid "Export plate as AMF..." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:314 msgid "Export current plate as AMF" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:317 msgid "Export plate as 3MF..." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:317 msgid "Export current plate as 3MF" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:330 msgid "Select &Plater Tab\tCtrl+1" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:330 msgid "Show the plater" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:336 msgid "Select &Controller Tab\tCtrl+T" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:336 msgid "Show the printer controller" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:344 msgid "Select P&rint Settings Tab\tCtrl+2" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:344 msgid "Show the print settings" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:347 msgid "Select &Filament Settings Tab\tCtrl+3" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:347 msgid "Show the filament settings" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:350 msgid "Select Print&er Settings Tab\tCtrl+4" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:350 msgid "Show the printer settings" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:362 msgid "Iso" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:362 msgid "Iso View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:363 msgid "Top View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:364 msgid "Bottom View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:365 msgid "Front" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:365 msgid "Front View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:366 msgid "Rear" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:366 msgid "Rear View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:367 msgid "Left" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:367 msgid "Left View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:368 msgid "Right" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:368 msgid "Right View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:374 msgid "&Configuration " msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:374 msgid "Run Configuration " msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:379 msgid "Prusa 3D Drivers" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:379 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:382 msgid "Prusa Edition Releases" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:382 msgid "Open the Prusa Edition releases page in your browser" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:389 msgid "Slic3r &Website" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:389 msgid "Open the Slic3r website in your browser" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:392 msgid "Slic3r &Manual" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:392 msgid "Open the Slic3r manual in your browser" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:396 msgid "System Info" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:396 msgid "Show system information" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:399 msgid "Report an Issue" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:399 msgid "Report an issue on the Slic3r Prusa Edition" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:402 msgid "&About Slic3r" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:402 msgid "Show about dialog" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:412 msgid "&File" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:413 msgid "&Plater" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:414 msgid "&Object" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:415 msgid "&Window" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:416 msgid "&View" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:420 msgid "&Help" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:452 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:464 msgid "No previously sliced file." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:469 msgid "Previously sliced file (" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:469 msgid ") not found." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:470 msgid "File Not Found" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:509 msgid "SVG" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:509 msgid "G-code" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:509 lib/Slic3r/GUI/Plater.pm:1615 msgid " file as:" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:523 msgid "Slicing…" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:523 msgid "Processing " msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:543 msgid " was successfully sliced." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:545 msgid "Slicing Done!" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:561 msgid "Select the STL file to repair:" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:575 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:589 msgid "Your file was repaired." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:589 msgid "Repair" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:600 msgid "Save configuration as:" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:618 lib/Slic3r/GUI/MainFrame.pm:662 msgid "Select configuration to load:" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:641 msgid "Save presets bundle as:" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:682 #, possible-perl-format msgid "%d presets successfully imported." msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:744 msgid "You have unsaved changes " msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:744 msgid ". Discard changes and continue anyway?" msgstr "" #: lib/Slic3r/GUI/MainFrame.pm:745 msgid "Unsaved Presets" msgstr "" #: lib/Slic3r/GUI/Plater.pm:104 lib/Slic3r/GUI/Plater.pm:2094 msgid "3D" msgstr "" #: lib/Slic3r/GUI/Plater.pm:138 msgid "2D" msgstr "" #: lib/Slic3r/GUI/Plater.pm:157 msgid "Layers" msgstr "" #: lib/Slic3r/GUI/Plater.pm:177 lib/Slic3r/GUI/Plater.pm:195 msgid "Add…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:179 lib/Slic3r/GUI/Plater.pm:197 msgid "Delete All" msgstr "" #: lib/Slic3r/GUI/Plater.pm:180 lib/Slic3r/GUI/Plater.pm:198 msgid "Arrange" msgstr "" #: lib/Slic3r/GUI/Plater.pm:182 msgid "More" msgstr "" #: lib/Slic3r/GUI/Plater.pm:183 msgid "Fewer" msgstr "" #: lib/Slic3r/GUI/Plater.pm:185 msgid "45° ccw" msgstr "" #: lib/Slic3r/GUI/Plater.pm:186 msgid "45° cw" msgstr "" #: lib/Slic3r/GUI/Plater.pm:187 lib/Slic3r/GUI/Plater.pm:203 msgid "Scale…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:188 lib/Slic3r/GUI/Plater.pm:204 #: lib/Slic3r/GUI/Plater.pm:2069 msgid "Split" msgstr "" #: lib/Slic3r/GUI/Plater.pm:189 lib/Slic3r/GUI/Plater.pm:205 #: lib/Slic3r/GUI/Plater.pm:2072 msgid "Cut…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:191 lib/Slic3r/GUI/Plater.pm:206 #: lib/Slic3r/GUI/Plater.pm:2076 msgid "Settings…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:192 msgid "Layer Editing" msgstr "" #: lib/Slic3r/GUI/Plater.pm:207 msgid "Layer editing" msgstr "" #: lib/Slic3r/GUI/Plater.pm:220 msgid "Name" msgstr "" #: lib/Slic3r/GUI/Plater.pm:221 lib/Slic3r/GUI/Plater.pm:904 msgid "Copies" msgstr "" #: lib/Slic3r/GUI/Plater.pm:222 lib/Slic3r/GUI/Plater.pm:1060 #: lib/Slic3r/GUI/Plater.pm:1065 lib/Slic3r/GUI/Plater.pm:2038 msgid "Scale" msgstr "" #: lib/Slic3r/GUI/Plater.pm:236 msgid "Export G-code…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:237 msgid "Slice now" msgstr "" #: lib/Slic3r/GUI/Plater.pm:238 msgid "Print…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:239 msgid "Send to printer" msgstr "" #: lib/Slic3r/GUI/Plater.pm:240 msgid "Export STL…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:367 msgid "Print settings" msgstr "" #: lib/Slic3r/GUI/Plater.pm:369 msgid "Printer" msgstr "" #: lib/Slic3r/GUI/Plater.pm:401 msgid "Info" msgstr "" #: lib/Slic3r/GUI/Plater.pm:412 msgid "Volume" msgstr "" #: lib/Slic3r/GUI/Plater.pm:413 msgid "Facets" msgstr "" #: lib/Slic3r/GUI/Plater.pm:414 msgid "Materials" msgstr "" #: lib/Slic3r/GUI/Plater.pm:415 msgid "Manifold" msgstr "" #: lib/Slic3r/GUI/Plater.pm:441 msgid "Sliced Info" msgstr "" #: lib/Slic3r/GUI/Plater.pm:450 msgid "Used Filament (m)" msgstr "" #: lib/Slic3r/GUI/Plater.pm:451 msgid "Used Filament (mm³)" msgstr "" #: lib/Slic3r/GUI/Plater.pm:452 msgid "Used Filament (g)" msgstr "" #: lib/Slic3r/GUI/Plater.pm:454 msgid "Estimated printing time" msgstr "" #: lib/Slic3r/GUI/Plater.pm:633 msgid "Loading…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:633 lib/Slic3r/GUI/Plater.pm:647 msgid "Processing input file\n" msgstr "" #: lib/Slic3r/GUI/Plater.pm:667 msgid "" "This file contains several objects positioned at multiple heights. Instead " "of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?\n" msgstr "" #: lib/Slic3r/GUI/Plater.pm:670 lib/Slic3r/GUI/Plater.pm:687 msgid "Multi-part object detected" msgstr "" #: lib/Slic3r/GUI/Plater.pm:684 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?\n" msgstr "" #: lib/Slic3r/GUI/Plater.pm:696 msgid "Loaded " msgstr "" #: lib/Slic3r/GUI/Plater.pm:748 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: lib/Slic3r/GUI/Plater.pm:749 msgid "Object too large?" msgstr "" #: lib/Slic3r/GUI/Plater.pm:904 msgid "Enter the number of copies of the selected object:" msgstr "" #: lib/Slic3r/GUI/Plater.pm:931 msgid "" "\n" "Non-positive value." msgstr "" #: lib/Slic3r/GUI/Plater.pm:932 msgid "" "\n" "Not a numeric value." msgstr "" #: lib/Slic3r/GUI/Plater.pm:933 msgid "Slic3r Error" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1034 #, possible-perl-format msgid "Enter the new size for the selected object (print bed: %smm):" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1035 lib/Slic3r/GUI/Plater.pm:1039 msgid "Scale along " msgstr "" #: lib/Slic3r/GUI/Plater.pm:1035 lib/Slic3r/GUI/Plater.pm:1039 #: lib/Slic3r/GUI/Plater.pm:1060 lib/Slic3r/GUI/Plater.pm:1065 msgid "Invalid scaling value entered" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1039 lib/Slic3r/GUI/Plater.pm:1065 #, possible-perl-format msgid "Enter the scale % for the selected object:" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1060 msgid "Enter the new max size for the selected object:" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1116 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: lib/Slic3r/GUI/Plater.pm:1125 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: lib/Slic3r/GUI/Plater.pm:1290 msgid "Slicing cancelled" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1304 msgid "Another export job is currently running." msgstr "" #: lib/Slic3r/GUI/Plater.pm:1335 msgid "Save G-code file as:" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1352 msgid "Export cancelled" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1449 msgid "File added to print queue" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1452 msgid "Sending G-code file to the OctoPrint server..." msgstr "" #: lib/Slic3r/GUI/Plater.pm:1455 msgid "G-code file exported to " msgstr "" #: lib/Slic3r/GUI/Plater.pm:1458 msgid "Export failed" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1509 lib/Slic3r/GUI/Plater.pm:1551 msgid "STL file exported to " msgstr "" #: lib/Slic3r/GUI/Plater.pm:1562 msgid "AMF file exported to " msgstr "" #: lib/Slic3r/GUI/Plater.pm:1566 msgid "Error exporting AMF file " msgstr "" #: lib/Slic3r/GUI/Plater.pm:1578 msgid "3MF file exported to " msgstr "" #: lib/Slic3r/GUI/Plater.pm:1582 msgid "Error exporting 3MF file " msgstr "" #: lib/Slic3r/GUI/Plater.pm:1818 msgid "" "Please install the OpenGL modules to use this feature (see build " "instructions)." msgstr "" #: lib/Slic3r/GUI/Plater.pm:1928 #, possible-perl-format msgid "%d (%d shells)" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1930 #, possible-perl-format msgid "Auto-repaired (%d errors)" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1935 #, possible-perl-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1940 msgid "Yes" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1991 msgid "Remove the selected object" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1994 msgid "Increase copies" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1994 msgid "Place one more copy of the selected object" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1997 msgid "Decrease copies" msgstr "" #: lib/Slic3r/GUI/Plater.pm:1997 msgid "Remove one copy of the selected object" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2000 msgid "Set number of copies…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2000 msgid "Change the number of copies of the selected object" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2004 msgid "Rotate 45° clockwise" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2004 msgid "Rotate the selected object by 45° clockwise" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2007 msgid "Rotate 45° counter-clockwise" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2007 msgid "Rotate the selected object by 45° counter-clockwise" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2012 msgid "Rotate" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2012 msgid "Rotate the selected object by an arbitrary angle" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2014 msgid "Around X axis…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2014 msgid "Rotate the selected object by an arbitrary angle around X axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2017 msgid "Around Y axis…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2017 msgid "Rotate the selected object by an arbitrary angle around Y axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2020 msgid "Around Z axis…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2020 msgid "Rotate the selected object by an arbitrary angle around Z axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2025 msgid "Mirror" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2025 msgid "Mirror the selected object" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2027 lib/Slic3r/GUI/Plater.pm:2043 #: lib/Slic3r/GUI/Plater.pm:2059 msgid "Along X axis…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2027 msgid "Mirror the selected object along the X axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2030 lib/Slic3r/GUI/Plater.pm:2046 #: lib/Slic3r/GUI/Plater.pm:2062 msgid "Along Y axis…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2030 msgid "Mirror the selected object along the Y axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2033 lib/Slic3r/GUI/Plater.pm:2049 #: lib/Slic3r/GUI/Plater.pm:2065 msgid "Along Z axis…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2033 msgid "Mirror the selected object along the Z axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2038 lib/Slic3r/GUI/Plater.pm:2054 msgid "Scale the selected object along a single axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2040 lib/Slic3r/GUI/Plater.pm:2056 msgid "Uniformly…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2040 lib/Slic3r/GUI/Plater.pm:2056 msgid "Scale the selected object along the XYZ axes" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2043 lib/Slic3r/GUI/Plater.pm:2059 msgid "Scale the selected object along the X axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2046 lib/Slic3r/GUI/Plater.pm:2062 msgid "Scale the selected object along the Y axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2049 lib/Slic3r/GUI/Plater.pm:2065 msgid "Scale the selected object along the Z axis" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2054 msgid "Scale to size" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2069 msgid "Split the selected object into individual parts" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2072 msgid "Open the 3D cutting tool" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2076 msgid "Open the object editor dialog" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2080 msgid "Reload from Disk" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2080 msgid "Reload the selected file from Disk" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2083 msgid "Export object as STL…" msgstr "" #: lib/Slic3r/GUI/Plater.pm:2083 msgid "Export this single object as STL file" msgstr "" #: lib/Slic3r/GUI/Plater/2D.pm:131 msgid "What do you want to print today? ™" msgstr "" #: lib/Slic3r/GUI/Plater/2D.pm:132 msgid "Drag your objects here" msgstr "" #: lib/Slic3r/GUI/Plater/3DPreview.pm:63 msgid "1 Layer" msgstr "" #: lib/Slic3r/GUI/Plater/3DPreview.pm:65 msgid "View" msgstr "" #: lib/Slic3r/GUI/Plater/3DPreview.pm:75 msgid "Show" msgstr "" #: lib/Slic3r/GUI/Plater/3DPreview.pm:78 lib/Slic3r/GUI/Plater/3DPreview.pm:79 msgid "Feature types" msgstr "" #: lib/Slic3r/GUI/Plater/3DPreview.pm:96 msgid "Retractions" msgstr "" #: lib/Slic3r/GUI/Plater/3DPreview.pm:97 msgid "Unretractions" msgstr "" #: lib/Slic3r/GUI/Plater/3DPreview.pm:98 msgid "Shells" msgstr ""