# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-11-15 08:28+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:303
msgid "Portions copyright"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:267
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:141
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:210
#, possible-c-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:367
#: src/slic3r/GUI/GUI_App.cpp:259
msgid "Version"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:269 src/slic3r/GUI/GUI_App.cpp:265
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:270 src/slic3r/GUI/GUI_App.cpp:265
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:271
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:272
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:308
msgid "Copy Version Info"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:204
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:199
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:286
msgid "Access violation"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:288
msgid "Illegal instruction"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
msgid "Divide by zero"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:292
msgid "Overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:294
msgid "Underflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:297
msgid "Floating reserved operand"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300
msgid "Stack overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:659
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:726
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:690
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710
msgid "Unknown error occured during exporting G-code."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:695
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:698
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:701
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:704
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:707
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:729
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:751
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:122
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:218 src/slic3r/GUI/Plater.cpp:177
#: src/slic3r/GUI/Tab.cpp:2699
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:123
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:124 src/libslic3r/PrintConfig.cpp:981
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:139
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:150
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:158 src/slic3r/GUI/ConfigWizard.cpp:262
#: src/slic3r/GUI/ConfigWizard.cpp:1476 src/slic3r/GUI/ConfigWizard.cpp:1490
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
#: src/slic3r/GUI/GCodeViewer.cpp:3513 src/slic3r/GUI/GCodeViewer.cpp:3519
#: src/slic3r/GUI/GCodeViewer.cpp:3527 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
#: src/slic3r/GUI/ObjectDataViewModel.cpp:134
#: src/slic3r/GUI/WipeTowerDialog.cpp:116 src/libslic3r/PrintConfig.cpp:240
#: src/libslic3r/PrintConfig.cpp:257 src/libslic3r/PrintConfig.cpp:264
#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:486
#: src/libslic3r/PrintConfig.cpp:512 src/libslic3r/PrintConfig.cpp:587
#: src/libslic3r/PrintConfig.cpp:595 src/libslic3r/PrintConfig.cpp:645
#: src/libslic3r/PrintConfig.cpp:775 src/libslic3r/PrintConfig.cpp:786
#: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:984
#: src/libslic3r/PrintConfig.cpp:1192 src/libslic3r/PrintConfig.cpp:1257
#: src/libslic3r/PrintConfig.cpp:1267 src/libslic3r/PrintConfig.cpp:1538
#: src/libslic3r/PrintConfig.cpp:1732 src/libslic3r/PrintConfig.cpp:1793
#: src/libslic3r/PrintConfig.cpp:1811 src/libslic3r/PrintConfig.cpp:1829
#: src/libslic3r/PrintConfig.cpp:1890 src/libslic3r/PrintConfig.cpp:1900
#: src/libslic3r/PrintConfig.cpp:2013 src/libslic3r/PrintConfig.cpp:2022
#: src/libslic3r/PrintConfig.cpp:2041 src/libslic3r/PrintConfig.cpp:2062
#: src/libslic3r/PrintConfig.cpp:2070 src/libslic3r/PrintConfig.cpp:2111
#: src/libslic3r/PrintConfig.cpp:2119 src/libslic3r/PrintConfig.cpp:2129
#: src/libslic3r/PrintConfig.cpp:2137 src/libslic3r/PrintConfig.cpp:2145
#: src/libslic3r/PrintConfig.cpp:2207 src/libslic3r/PrintConfig.cpp:2436
#: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2522
#: src/libslic3r/PrintConfig.cpp:2620 src/libslic3r/PrintConfig.cpp:2629
#: src/libslic3r/PrintConfig.cpp:2679 src/libslic3r/PrintConfig.cpp:2830
#: src/libslic3r/PrintConfig.cpp:2918 src/libslic3r/PrintConfig.cpp:2925
#: src/libslic3r/PrintConfig.cpp:2932 src/libslic3r/PrintConfig.cpp:2946
#: src/libslic3r/PrintConfig.cpp:2970 src/libslic3r/PrintConfig.cpp:2980
#: src/libslic3r/PrintConfig.cpp:2990 src/libslic3r/PrintConfig.cpp:3150
#: src/libslic3r/PrintConfig.cpp:3191 src/libslic3r/PrintConfig.cpp:3330
#: src/libslic3r/PrintConfig.cpp:3339 src/libslic3r/PrintConfig.cpp:3348
#: src/libslic3r/PrintConfig.cpp:3358 src/libslic3r/PrintConfig.cpp:3423
#: src/libslic3r/PrintConfig.cpp:3433 src/libslic3r/PrintConfig.cpp:3445
#: src/libslic3r/PrintConfig.cpp:3465 src/libslic3r/PrintConfig.cpp:3475
#: src/libslic3r/PrintConfig.cpp:3485 src/libslic3r/PrintConfig.cpp:3503
#: src/libslic3r/PrintConfig.cpp:3518 src/libslic3r/PrintConfig.cpp:3532
#: src/libslic3r/PrintConfig.cpp:3543 src/libslic3r/PrintConfig.cpp:3556
#: src/libslic3r/PrintConfig.cpp:3601 src/libslic3r/PrintConfig.cpp:3611
#: src/libslic3r/PrintConfig.cpp:3620 src/libslic3r/PrintConfig.cpp:3630
#: src/libslic3r/PrintConfig.cpp:3646 src/libslic3r/PrintConfig.cpp:3670
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:160
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:171 src/slic3r/GUI/BedShapeDialog.cpp:182
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:172 src/slic3r/GUI/BedShapeDialog.cpp:183
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:173 src/slic3r/GUI/BedShapeDialog.cpp:184
#: src/slic3r/GUI/GUI_Preview.cpp:252 src/libslic3r/ExtrusionEntity.cpp:331
#: src/libslic3r/ExtrusionEntity.cpp:366
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:175 src/slic3r/GUI/BedShapeDialog.cpp:186
msgid "Invalid"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:202 src/slic3r/GUI/BedShapeDialog.cpp:288
#: src/slic3r/GUI/GUI_ObjectList.cpp:1702
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:324
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:370 src/slic3r/GUI/GCodeViewer.cpp:4046
#: src/slic3r/GUI/MainFrame.cpp:2146
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:394
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:404 src/slic3r/GUI/BedShapeDialog.cpp:475
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:413 src/slic3r/GUI/BedShapeDialog.cpp:483
#: src/slic3r/GUI/Tab.cpp:3673
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:438 src/slic3r/GUI/BedShapeDialog.cpp:509
msgid "Not found:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:465
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:639
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:645 src/slic3r/GUI/BedShapeDialog.cpp:693
#: src/slic3r/GUI/BedShapeDialog.cpp:715
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:656
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:664
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:668
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:683
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:705
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:115 src/slic3r/GUI/ConfigWizard.cpp:1396
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:224
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:231
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Revert color to default"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:51
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:52
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:56
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:49
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:51
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1436
#: src/libslic3r/PrintConfig.cpp:253
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:62
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:64 src/libslic3r/PrintConfig.cpp:1188
msgid "First layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:84
#, possible-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:92
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:94
msgid "Spiral Vase"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:124
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:128
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:130
#: src/slic3r/GUI/ConfigManipulation.cpp:151
msgid "Wipe Tower"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:146
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:149
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:168
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:171
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:172
msgid "Support Generator"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:199
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:202
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:204
#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
#: src/slic3r/GUI/Plater.cpp:422 src/slic3r/GUI/Tab.cpp:1489
#: src/slic3r/GUI/Tab.cpp:1491 src/libslic3r/PrintConfig.cpp:441
#: src/libslic3r/PrintConfig.cpp:682 src/libslic3r/PrintConfig.cpp:706
#: src/libslic3r/PrintConfig.cpp:1058 src/libslic3r/PrintConfig.cpp:1072
#: src/libslic3r/PrintConfig.cpp:1109 src/libslic3r/PrintConfig.cpp:1347
#: src/libslic3r/PrintConfig.cpp:1357 src/libslic3r/PrintConfig.cpp:1424
#: src/libslic3r/PrintConfig.cpp:1443 src/libslic3r/PrintConfig.cpp:1462
#: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:2285
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:332
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:335
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:346
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:349
msgid "Invalid pinhead diameter"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:307
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28
#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:317
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "Active"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1314
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1316
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
#: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/ConfigWizard.cpp:2688
#: src/slic3r/GUI/GUI.cpp:340 src/slic3r/GUI/Plater.cpp:782
#: src/libslic3r/Preset.cpp:1317
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1318
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1353
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93
#, possible-c-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:262
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:266
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:330
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:330
msgid "Standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
#: src/slic3r/GUI/Preferences.cpp:414 src/slic3r/GUI/Tab.cpp:3755
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1157
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:332 src/slic3r/GUI/ConfigWizard.cpp:652
#: src/slic3r/GUI/DoubleSlider.cpp:2018 src/slic3r/GUI/Plater.cpp:394
#: src/slic3r/GUI/Plater.cpp:540 src/slic3r/GUI/Preferences.cpp:416
#: src/libslic3r/PrintConfig.cpp:1246
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:484
#, possible-c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:486
#, possible-c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:488
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:490
#, possible-c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:495
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:498
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:550
#, possible-c-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:640
msgid "Printer:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:642
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:643
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:720 src/slic3r/GUI/ConfigWizard.cpp:892
#: src/slic3r/GUI/ConfigWizard.cpp:952 src/slic3r/GUI/ConfigWizard.cpp:1088
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752 src/slic3r/GUI/ConfigWizard.cpp:2043
#: src/slic3r/GUI/ConfigWizard.cpp:2696 src/slic3r/GUI/ConfigWizard.cpp:2880
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752 src/slic3r/GUI/ConfigWizard.cpp:2696
msgid "SLA materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:755
msgid "All installed printers are compatible with the selected %1%."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1315
msgid "filament"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:778
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:779
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1175
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1175
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1177
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1179
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1206
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1206
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1214
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1218
#, possible-c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1224 src/slic3r/GUI/Preferences.cpp:174
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1228
#, possible-c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1231
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1236
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:720
#: src/slic3r/GUI/Plater.cpp:3525
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1246
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1250
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1259
msgid "Files association"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1261 src/slic3r/GUI/Preferences.cpp:156
msgid "Associate .3mf files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/Preferences.cpp:163
msgid "Associate .stl files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1272
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1274
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1279
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1280
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1281
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1287
msgid "The size of the object can be specified in inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1288
msgid "Use inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1322
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1326
#, possible-c-format
msgid "Pick another vendor supported by %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1357
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1357 src/slic3r/GUI/Tab.cpp:2303
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1361
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1396
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1399
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1433 src/slic3r/GUI/Field.cpp:255
#: src/slic3r/GUI/Field.cpp:314 src/slic3r/GUI/Field.cpp:1554
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:429
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1472
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1475
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1485
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1486
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1489
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1547
msgid "Nozzle and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1547
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1563
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1564
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1567
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1568 src/slic3r/GUI/ConfigWizard.cpp:1582
#: src/libslic3r/PrintConfig.cpp:384 src/libslic3r/PrintConfig.cpp:1169
#: src/libslic3r/PrintConfig.cpp:1221 src/libslic3r/PrintConfig.cpp:2741
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1577
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1578
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1581
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2043 src/slic3r/GUI/ConfigWizard.cpp:2883
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2097
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2102
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2410 src/slic3r/GUI/DoubleSlider.cpp:2509
#: src/slic3r/GUI/DoubleSlider.cpp:2530 src/slic3r/GUI/GUI.cpp:232
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2431
msgid "The following FFF printer models have no filament selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2435
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2449
msgid "The following SLA printer models have no materials selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2453
msgid "Do you want to select default SLA materials for these printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2495
msgid "Configuration is edited in ConfigWizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2538
msgid "All user presets will be deleted."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2568
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/ConfigWizard.cpp:2597
msgid "Do you want to continue changing the configuration?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2663
msgid "A new Printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2668
msgid "Some Printers were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2688
msgid "A new %1% was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2688 src/slic3r/GUI/GCodeViewer.cpp:4037
#: src/slic3r/GUI/GCodeViewer.cpp:4063 src/slic3r/GUI/GUI.cpp:339
#: src/slic3r/GUI/Plater.cpp:780 src/slic3r/GUI/Tab.cpp:1907
#: src/slic3r/GUI/Tab.cpp:1908
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2696
msgid "Some %1% were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2740
msgid "Custom printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2825
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2828
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2829
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2830
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2831
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:490
#: src/slic3r/GUI/FirmwareDialog.cpp:153
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2851
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2859
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2880
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2880 src/slic3r/GUI/ConfigWizard.cpp:2883
#: src/slic3r/GUI/GUI_ObjectList.cpp:3785
msgid "Type:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2883
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3004
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3005
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3007
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3008
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
msgid "Performing desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:378
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:419
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
#: src/slic3r/GUI/GUI_App.cpp:2101
msgid "Desktop Integration"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:466
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:480
msgid "Perform"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:486
#: src/slic3r/GUI/GLCanvas3D.cpp:4728 src/slic3r/GUI/KBShortcutsDialog.cpp:97
#: src/slic3r/GUI/MainFrame.cpp:1341
msgid "Undo"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:109
msgid "Place bearings in slots and resume printing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1379
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1381
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1385 src/slic3r/GUI/DoubleSlider.cpp:2242
msgid "Jump to move"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1388
#, possible-c-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1391
#, possible-c-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1396
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1398
msgid "This is wipe tower layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1408
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1412
msgid "Print mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1426
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1428
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1430
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1431
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1433
msgid "Add another code - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1434
msgid "Add another code - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1440
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1454
msgid "Color change (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1455
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1457
msgid "Pause print (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1459
msgid "Custom template (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1461
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1468
msgid "Note"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1470
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1473
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1476
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1479
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1484
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1486
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1487
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1590 src/slic3r/GUI/DoubleSlider.cpp:1621
#: src/slic3r/GUI/GUI_Factories.cpp:772
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1591 src/slic3r/GUI/GUI_Factories.cpp:773
msgid "active"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1600
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1600 src/slic3r/GUI/GUI_Factories.cpp:734
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1601
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1603 src/slic3r/GUI/GUI_Factories.cpp:781
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1622
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1630
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1631
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1956
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1967
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1971
msgid "Add custom template"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1974
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1992
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1993
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1994
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2000
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2001
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2002
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2003
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2013 src/slic3r/GUI/DoubleSlider.cpp:2242
msgid "Jump to height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2018
msgid "Hide ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2022
msgid "Show object height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2022
msgid "Show object height on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2026
msgid "Show estimated print time"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2026
msgid "Show estimated print time on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2030
msgid "Ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2030
msgid "Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2035
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2039
msgid "Set auto color changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2074
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2075 src/slic3r/GUI/Tab.cpp:1305
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2076
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1137 src/slic3r/GUI/GUI.cpp:245
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:640
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:670
#: src/slic3r/GUI/WipeTowerDialog.cpp:58 src/slic3r/GUI/WipeTowerDialog.cpp:443
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2203
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2204
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2225
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2226
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2241
msgid "Enter the move you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2241
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2502
msgid "The last color change data was saved for a single extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2503 src/slic3r/GUI/DoubleSlider.cpp:2519
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2505
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2506 src/slic3r/GUI/DoubleSlider.cpp:2527
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2520
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2523
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2525
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2526
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:320 src/slic3r/GUI/GUI_ObjectList.cpp:537
#: src/slic3r/GUI/GUI_ObjectList.cpp:549 src/slic3r/GUI/GUI_ObjectList.cpp:985
#: src/slic3r/GUI/GUI_ObjectList.cpp:1970
#: src/slic3r/GUI/GUI_ObjectList.cpp:4299
#: src/slic3r/GUI/ObjectDataViewModel.cpp:250
#: src/slic3r/GUI/ObjectDataViewModel.cpp:352
#: src/slic3r/GUI/ObjectDataViewModel.cpp:376
#: src/slic3r/GUI/ObjectDataViewModel.cpp:607 src/libslic3r/PrintConfig.cpp:762
msgid "default"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
#: src/libslic3r/PrintConfig.cpp:628 src/libslic3r/PrintConfig.cpp:1360
#: src/libslic3r/PrintConfig.cpp:2051 src/libslic3r/PrintConfig.cpp:2214
#: src/libslic3r/PrintConfig.cpp:2290 src/libslic3r/PrintConfig.cpp:2540
#: src/libslic3r/PrintConfig.cpp:2587 src/libslic3r/PrintConfig.cpp:2606
msgid "layers"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:190
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:193
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:825
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1070
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1082
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:226
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:266
#, possible-c-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""

#: src/slic3r/GUI/Field.cpp:269 src/slic3r/GUI/Field.cpp:334
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/Field.cpp:282 src/slic3r/GUI/Field.cpp:381
#: src/slic3r/GUI/Field.cpp:1566
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:330
#, possible-c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:388
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:154
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:201
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:285
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:286
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:334
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:421 src/slic3r/GUI/FirmwareDialog.cpp:456
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:438
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:550
#, possible-c-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:651
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:653
#, possible-c-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:788
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:816
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:297
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:372
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:818
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:828
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:831
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:832
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:852
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:863
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:303
#: src/slic3r/GUI/Mouse3DController.cpp:543
#: src/slic3r/GUI/PrintHostDialogs.cpp:252
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:122
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:916
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:917
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:920
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1403
msgid "Shape Gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:76
msgid "Select shape from the gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:100
msgid "Add to bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:101
msgid "Add selected shape(s) to the bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:117
msgid "Add"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:117
msgid "Add one or more custom shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/GalleryDialog.cpp:510
#: src/slic3r/GUI/GLCanvas3D.cpp:4519 src/slic3r/GUI/GUI_Factories.cpp:444
#: src/slic3r/GUI/Tab.cpp:3673
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:118
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:404
msgid "Choose one or more files (STL, OBJ):"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:444
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:455
msgid "Choose one PNG file:"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:468
msgid "Replacing of the PNG"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:512
msgid "Change thumbnail"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:553 src/slic3r/GUI/GalleryDialog.cpp:558
msgid "Loading of the \"%1%\""
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:272
msgid "Tool position"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1558
msgid "Generating toolpaths"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1671
msgid "Generating vertex buffer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:2089
msgid "Generating index buffers"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3379
msgid "Click to hide"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3379
msgid "Click to show"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3513
msgid "up to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3519
msgid "above"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3527
msgid "from"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3527
msgid "to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3577 src/slic3r/GUI/GCodeViewer.cpp:3578
#: src/slic3r/GUI/GCodeViewer.cpp:3627
msgid "Percentage"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3588 src/slic3r/GUI/GCodeViewer.cpp:3627
#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:957
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3588 src/slic3r/GUI/GCodeViewer.cpp:3627
#: src/slic3r/GUI/RammingChart.cpp:90
msgid "Time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3627 src/slic3r/GUI/GCodeViewer.cpp:3638
#: src/slic3r/GUI/GCodeViewer.cpp:3899
msgid "Used filament"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3630
msgid "Height (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3631
msgid "Width (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3632
msgid "Speed (mm/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3633
msgid "Fan Speed (%)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3634
msgid "Temperature (°C)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3635
msgid "Volumetric flow rate (mm³/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3638 src/slic3r/GUI/GUI_Preview.cpp:224
#: src/slic3r/GUI/GUI_Preview.cpp:957
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3641 src/slic3r/GUI/GUI_Preview.cpp:225
#: src/slic3r/GUI/GUI_Preview.cpp:956
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3679 src/slic3r/GUI/GCodeViewer.cpp:3725
#: src/slic3r/GUI/GCodeViewer.cpp:3730 src/slic3r/GUI/GUI_ObjectList.cpp:312
#: src/slic3r/GUI/wxExtensions.cpp:536 src/libslic3r/PrintConfig.cpp:757
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3702
msgid "Default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3725
msgid "default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3824 src/slic3r/GUI/GCodeViewer.cpp:3880
msgid "Color change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3843 src/slic3r/GUI/GCodeViewer.cpp:3878
msgid "Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3879 src/slic3r/GUI/GCodeViewer.cpp:3913
msgid "Pause"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3896 src/slic3r/GUI/GCodeViewer.cpp:3899
msgid "Event"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3896 src/slic3r/GUI/GCodeViewer.cpp:3899
msgid "Remaining time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3896 src/slic3r/GUI/GCodeViewer.cpp:3899
msgid "Duration"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3942 src/slic3r/GUI/GUI_Preview.cpp:1048
#: src/libslic3r/PrintConfig.cpp:2835
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3945
msgid "Movement"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3946
msgid "Extrusion"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3947 src/slic3r/GUI/Tab.cpp:1807
#: src/slic3r/GUI/Tab.cpp:2746
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3964 src/slic3r/GUI/GCodeViewer.cpp:3967
#: src/slic3r/GUI/GUI_Preview.cpp:1049
msgid "Wipe"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4003 src/slic3r/GUI/GUI_Preview.cpp:257
#: src/slic3r/GUI/GUI_Preview.cpp:272
msgid "Options"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4006 src/slic3r/GUI/GUI_Preview.cpp:1050
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4007 src/slic3r/GUI/GUI_Preview.cpp:1051
msgid "Deretractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4008 src/slic3r/GUI/GUI_Preview.cpp:1052
msgid "Seams"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4009 src/slic3r/GUI/GUI_Preview.cpp:1053
msgid "Tool changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4010 src/slic3r/GUI/GUI_Preview.cpp:1054
msgid "Color changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4011 src/slic3r/GUI/GUI_Preview.cpp:1055
msgid "Print pauses"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4012 src/slic3r/GUI/GUI_Preview.cpp:1056
msgid "Custom G-codes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4032 src/slic3r/GUI/GCodeViewer.cpp:4051
#: src/slic3r/GUI/GUI.cpp:341 src/slic3r/GUI/Plater.cpp:783
#: src/libslic3r/PrintConfig.cpp:289
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4034 src/slic3r/GUI/GCodeViewer.cpp:4056
#: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:779
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4076
msgid "Estimated printing times"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4095
msgid "Normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4096
msgid "Stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4103 src/libslic3r/PrintConfig.cpp:1147
#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1175
#: src/libslic3r/PrintConfig.cpp:1217
msgid "First layer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4104
msgid "Total"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4138
msgid "Show stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4142
msgid "Show normal mode"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:219 src/slic3r/GUI/GLCanvas3D.cpp:4666
#: src/slic3r/GUI/ObjectDataViewModel.cpp:53
msgid "Variable layer height"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:221
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:223
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:225
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:227
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:229
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:231
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:233
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:235
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:237
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:239
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:242
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:248
msgid "Quality / Speed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:251
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:262
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:268 src/libslic3r/PrintConfig.cpp:781
msgid "Radius"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:278
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:287 src/slic3r/GUI/GLCanvas3D.cpp:4086
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:553
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:668
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1275
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1283
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1291
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1702
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2583
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:560
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2668
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:562
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3276
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3796 src/slic3r/GUI/GLCanvas3D.cpp:4627
msgid "Switch to Settings"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3797 src/slic3r/GUI/GLCanvas3D.cpp:4627
msgid "Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3798 src/slic3r/GUI/GLCanvas3D.cpp:4628
msgid "Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3798 src/slic3r/GUI/GLCanvas3D.cpp:4628
msgid "Material Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3799 src/slic3r/GUI/GLCanvas3D.cpp:4629
msgid "Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3946
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3946
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3966
#, possible-c-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3966
#, possible-c-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3986 src/slic3r/GUI/GLCanvas3D.cpp:4645
#: src/slic3r/GUI/KBShortcutsDialog.cpp:106 src/slic3r/GUI/Search.cpp:435
msgid "Search"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4000 src/slic3r/GUI/GLCanvas3D.cpp:4008
#: src/slic3r/GUI/Search.cpp:441
msgid "Enter a search term"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4039
msgid "Arrange options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4069
msgid "Press %1%left mouse button to enter the exact value"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4071
msgid "Spacing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4078
msgid "Enable rotations (slow)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4096 src/slic3r/GUI/GLCanvas3D.cpp:4537
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Plater.cpp:1606
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4511
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4528 src/slic3r/GUI/KBShortcutsDialog.cpp:96
#: src/slic3r/GUI/Plater.cpp:5442
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4537 src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4537
msgid "Click right mouse button to show arrangement options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4559
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4568
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4580 src/slic3r/GUI/GUI_Factories.cpp:1081
#: src/slic3r/GUI/GUI_Factories.cpp:1105 src/slic3r/GUI/GUI_Factories.cpp:1116
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4591 src/slic3r/GUI/GUI_Factories.cpp:1084
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4604
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4614
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4728 src/slic3r/GUI/GLCanvas3D.cpp:4767
msgid "Click right mouse button to open/close History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4751
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4767 src/slic3r/GUI/KBShortcutsDialog.cpp:98
#: src/slic3r/GUI/MainFrame.cpp:1344
msgid "Redo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4789
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6509
msgid "An object outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6510
msgid "A toolpath outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6511
msgid "SLA supports outside the print area were detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6512
msgid "Some objects are not visible during editing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6514
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6588
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6603
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4181
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
msgid "in"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198
msgid "Keep upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:199
msgid "Keep lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:200
msgid "Rotate lower part upwards"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:205
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
#: src/slic3r/GUI/ObjectDataViewModel.cpp:49
msgid "Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
msgid "Brush shape"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "Enforce supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Right mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:465
msgid "Block supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Shift + Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:460
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:263
msgid "Remove selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Remove all selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
msgid "Circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:67
#: src/libslic3r/PrintConfig.cpp:1131
msgid "Triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
msgid "Highlight overhang by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
msgid "Enforce"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Tool type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Brush"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:128
msgid "Smart fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:131
msgid "Smart fill angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:132
msgid "Split triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67
msgid "On overhangs only"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:174
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:193
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:377
msgid "Paints facets according to the chosen painting brush."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:390
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:237
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:252
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:418
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149
msgid "Paints all facets inside, regardless of their orientation."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:261
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:427
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:157
msgid "Ignores facets facing away from the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:270
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:436
msgid "Paints only one facet."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:279
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:283
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:300
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:311
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:449
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:468
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:479
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:132
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:136
msgid "Alt + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:289
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:332
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:339
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:498
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:505
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:176
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:183
msgid "Ctrl + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:344
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:510
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:188
msgid "Reset selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:395
msgid "Block supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:396
msgid "Add supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:463
msgid "Add supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:57
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
#: src/libslic3r/PrintConfig.cpp:3662
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:286
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:402
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:596
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:673
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:767
msgid "Hollow and drill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:817
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:27
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:45
#: src/slic3r/GUI/ObjectDataViewModel.cpp:51
msgid "Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "First color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
msgid "Second color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:120
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:693
msgid "Remove painted color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
msgid "Clear all"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:129
msgid "Bucket fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:403
msgid "Paints neighboring facets that have the same color."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:455
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:696
msgid "Painted using: Extruder %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:55
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:466
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:543
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
#: src/libslic3r/PrintConfig.cpp:4235
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:505
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:552
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:312
msgid "Apply"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:579
#: src/libslic3r/PrintConfig.cpp:4250
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:266
msgid "Enforce seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:268
msgid "Block seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
msgid "Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:66
msgid "Mesh name"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:68
msgid "Detail level"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:69
msgid "Decimate ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:112
msgid ""
"Processing model '%1%' with more than 1M triangles could be slow. It is "
"highly recommend to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:115
#: src/slic3r/GUI/GUI_Factories.cpp:699
msgid "Simplify model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:142
msgid "Simplify"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:243
msgid "Extra high"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:244
msgid "High"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:245
msgid "Medium"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:246
msgid "Low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:247
msgid "Extra low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297
#, possible-c-format
msgid "%d triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:300
msgid "Show wireframe"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:306
msgid "Operation already cancelling. Please wait few seconds."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:315
msgid "Can't apply when proccess preview."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322
msgid "Process %1% / 100"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:472
msgid "Simplify "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1227
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1230
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
#: src/libslic3r/PrintConfig.cpp:3492
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:372
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:522
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:706
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:774
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:880
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:901
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:902
msgid "Save support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:962
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1055
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1135
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1136
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1142
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1190
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1201
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1226
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1229
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:196
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:561
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:673
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1276
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:292
msgid "Undefined"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:317
msgid "%1% was substituted with %2%"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:326
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:327
msgid "The following values were substituted:"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:328
msgid "Review the substitutions and adjust them if needed."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:338 src/slic3r/GUI/Plater.cpp:781
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:342 src/slic3r/GUI/PhysicalPrinterDialog.cpp:157
msgid "Physical Printer"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:355
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:365
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:263
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:264
msgid "Developed by Prusa Research."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:266
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:267
msgid "Artwork model by M Boyer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:408
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:416
#, possible-c-format
msgid "%s - BREAKING CHANGE"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:418
msgid "Quit, I will move my data now"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:418
msgid "Start the application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:658
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:661
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:665
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:668
msgid "Critical error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:673
msgid "Internal error: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:862 src/slic3r/GUI/GUI_App.cpp:953
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:868 src/slic3r/GUI/GUI_App.cpp:959
msgid ""
"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:909
#, possible-c-format
msgid ""
"PrusaSlicer detected another configuration folder at %s.\n"
"Its version is %s.\n"
"Last version you used in current configuration folder is %s.\n"
"Please note that PrusaSlicer uses different folders to save configuration of "
"alpha, beta and full release versions.\n"
"Would you like to copy found configuration to your current configuration "
"folder?\n"
"\n"
"If you select yes, PrusaSlicer will copy all profiles and other files from "
"found folder to the current one. Overwriting any existing file with matching "
"name.\n"
"If you select no, you will continue with current configuration."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:918
#, possible-c-format
msgid ""
"PrusaSlicer detected another configuration folder at %s.\n"
"Its version is %s.\n"
"There is no configuration file in current configuration folder.\n"
"Please note that PrusaSlicer uses different folders to save configuration of "
"alpha, beta and full release versions.\n"
"Would you like to copy found configuration to your current configuration "
"folder?\n"
"\n"
"If you select yes, PrusaSlicer will copy all profiles and other files from "
"found folder to the current one.\n"
"If you select no, you will start with clean installation with configuration "
"wizard."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:927
msgid "PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:999
msgid ""
"You have started PrusaSlicer for 64-bit architecture on 32-bit system.\n"
"Please download and install correct version at https://www.prusa3d.cz/"
"prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1009
msgid ""
"You have started PrusaSlicer for 32-bit architecture on 64-bit system.\n"
"Please download and install correct version at https://www.prusa3d.cz/"
"prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1055
#, possible-c-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1057 src/slic3r/GUI/GUI_App.cpp:2923
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:888
msgid "Remember my choice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1105
msgid "Loading configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1137
msgid "New release version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1138
msgid "See Download page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1152
msgid "New prerelease version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1153
msgid "See Releases page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1194
msgid "Preparing settings tabs"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1544
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1548
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1550
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1554 src/slic3r/GUI/PhysicalPrinterDialog.cpp:717
msgid "Information"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1567 src/slic3r/GUI/GUI_App.cpp:1578
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1581
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1586
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1715
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1727
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1739
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1750
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1889
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1889
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2038
msgid "modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2092
#, possible-c-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2096
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2096
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2097
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2097
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2098
msgid "Check for Configuration Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2098
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2105
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2111
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2116 src/slic3r/GUI/wxExtensions.cpp:707
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2116
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2118 src/slic3r/GUI/wxExtensions.cpp:709
msgctxt "Mode"
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2118
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2119 src/slic3r/GUI/wxExtensions.cpp:710
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2119
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2124
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2124
#, possible-c-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2127
msgid "&Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2130
msgid "Flash printer &firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2130
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2150
msgid "Taking a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2151
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2152
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2168
msgid "Loading a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2177
msgid "Continue to activate a configuration snapshot %1%?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2191
msgid "Failed to activate configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2210
msgid "Restart application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2244
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2247
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2249 src/slic3r/GUI/Preferences.cpp:547
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2276
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2393 src/slic3r/GUI/GUI_App.cpp:2454
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_App.cpp:2457
msgid "For new project all modifications will be reseted"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2495
msgid "Loading a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2498
msgid "Project is loading"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2498
msgid "Opening new project while some presets are unsaved."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2517
msgid "The uploads are still ongoing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2517
msgid "Stop them and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2521
msgid "Ongoing uploads"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2722
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2723 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
#: src/slic3r/GUI/Plater.cpp:2361
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2747
msgid "Configuration is editing from ConfigWizard"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2772
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2922
msgid "Open hyperlink in default browser?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2922
msgid "PrusaSlicer: Open hyperlink"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:57 src/slic3r/GUI/GUI_Init.cpp:60
msgid "PrusaSlicer GUI initialization failed"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:60
msgid "Fatal error, exception catched: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
#: src/libslic3r/PrintConfig.cpp:254 src/libslic3r/PrintConfig.cpp:371
#: src/libslic3r/PrintConfig.cpp:413 src/libslic3r/PrintConfig.cpp:422
#: src/libslic3r/PrintConfig.cpp:674 src/libslic3r/PrintConfig.cpp:740
#: src/libslic3r/PrintConfig.cpp:748 src/libslic3r/PrintConfig.cpp:1189
#: src/libslic3r/PrintConfig.cpp:1274 src/libslic3r/PrintConfig.cpp:1490
#: src/libslic3r/PrintConfig.cpp:1880 src/libslic3r/PrintConfig.cpp:1946
#: src/libslic3r/PrintConfig.cpp:2168 src/libslic3r/PrintConfig.cpp:2749
#: src/libslic3r/PrintConfig.cpp:2757 src/libslic3r/PrintConfig.cpp:2816
#: src/libslic3r/PrintConfig.cpp:2825
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
#: src/slic3r/GUI/GUI_Preview.cpp:249 src/slic3r/GUI/Tab.cpp:1533
#: src/slic3r/GUI/Tab.cpp:1535 src/libslic3r/ExtrusionEntity.cpp:328
#: src/libslic3r/ExtrusionEntity.cpp:360 src/libslic3r/PrintConfig.cpp:636
#: src/libslic3r/PrintConfig.cpp:2011 src/libslic3r/PrintConfig.cpp:2020
#: src/libslic3r/PrintConfig.cpp:2029 src/libslic3r/PrintConfig.cpp:2039
#: src/libslic3r/PrintConfig.cpp:2048 src/libslic3r/PrintConfig.cpp:2457
#: src/libslic3r/PrintConfig.cpp:2463 src/libslic3r/PrintConfig.cpp:2471
#: src/libslic3r/PrintConfig.cpp:2483 src/libslic3r/PrintConfig.cpp:2493
#: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:2519
#: src/libslic3r/PrintConfig.cpp:2535 src/libslic3r/PrintConfig.cpp:2556
#: src/libslic3r/PrintConfig.cpp:2568 src/libslic3r/PrintConfig.cpp:2585
#: src/libslic3r/PrintConfig.cpp:2603 src/libslic3r/PrintConfig.cpp:2617
#: src/libslic3r/PrintConfig.cpp:2627 src/libslic3r/PrintConfig.cpp:2636
#: src/libslic3r/PrintConfig.cpp:2647 src/libslic3r/PrintConfig.cpp:2661
#: src/libslic3r/PrintConfig.cpp:2677 src/libslic3r/PrintConfig.cpp:2685
#: src/libslic3r/PrintConfig.cpp:2686 src/libslic3r/PrintConfig.cpp:2695
#: src/libslic3r/PrintConfig.cpp:2709 src/libslic3r/PrintConfig.cpp:2717
#: src/libslic3r/PrintConfig.cpp:2731
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
#: src/libslic3r/PrintConfig.cpp:2952 src/libslic3r/PrintConfig.cpp:2960
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:65
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/GUI_Preview.cpp:245
#: src/slic3r/GUI/Tab.cpp:1499 src/libslic3r/ExtrusionEntity.cpp:324
#: src/libslic3r/ExtrusionEntity.cpp:352 src/libslic3r/PrintConfig.cpp:1506
#: src/libslic3r/PrintConfig.cpp:1512 src/libslic3r/PrintConfig.cpp:1526
#: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1544
#: src/libslic3r/PrintConfig.cpp:1546
msgid "Ironing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1238
#: src/libslic3r/PrintConfig.cpp:1239 src/libslic3r/PrintConfig.cpp:1254
#: src/libslic3r/PrintConfig.cpp:1264
msgid "Fuzzy Skin"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/GUI_Preview.cpp:220
#: src/slic3r/GUI/Tab.cpp:1567 src/libslic3r/PrintConfig.cpp:473
#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:1281
#: src/libslic3r/PrintConfig.cpp:1463 src/libslic3r/PrintConfig.cpp:1545
#: src/libslic3r/PrintConfig.cpp:1936 src/libslic3r/PrintConfig.cpp:2256
#: src/libslic3r/PrintConfig.cpp:2308 src/libslic3r/PrintConfig.cpp:2801
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1606
#: src/slic3r/GUI/Tab.cpp:2241 src/libslic3r/PrintConfig.cpp:758
#: src/libslic3r/PrintConfig.cpp:1417 src/libslic3r/PrintConfig.cpp:1914
#: src/libslic3r/PrintConfig.cpp:2277 src/libslic3r/PrintConfig.cpp:2548
#: src/libslic3r/PrintConfig.cpp:2575
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:717
#: src/libslic3r/PrintConfig.cpp:826 src/libslic3r/PrintConfig.cpp:1176
#: src/libslic3r/PrintConfig.cpp:1425 src/libslic3r/PrintConfig.cpp:1923
#: src/libslic3r/PrintConfig.cpp:2297 src/libslic3r/PrintConfig.cpp:2557
#: src/libslic3r/PrintConfig.cpp:2789
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1519
#: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:494
#: src/libslic3r/PrintConfig.cpp:510
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1478
#: src/slic3r/GUI/Tab.cpp:1511 src/slic3r/GUI/Tab.cpp:1628
#: src/slic3r/GUI/Tab.cpp:1632 src/slic3r/GUI/Tab.cpp:1968
#: src/slic3r/GUI/Tab.cpp:2335 src/slic3r/GUI/Tab.cpp:4354
#: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:461
#: src/libslic3r/PrintConfig.cpp:1368 src/libslic3r/PrintConfig.cpp:1452
#: src/libslic3r/PrintConfig.cpp:1499 src/libslic3r/PrintConfig.cpp:2433
#: src/libslic3r/PrintConfig.cpp:2443 src/libslic3r/PrintConfig.cpp:2976
#: src/libslic3r/PrintConfig.cpp:3148
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:390
#: src/slic3r/GUI/Tab.cpp:4288 src/slic3r/GUI/Tab.cpp:4289
#: src/libslic3r/PrintConfig.cpp:3321 src/libslic3r/PrintConfig.cpp:3328
#: src/libslic3r/PrintConfig.cpp:3337 src/libslic3r/PrintConfig.cpp:3346
#: src/libslic3r/PrintConfig.cpp:3356 src/libslic3r/PrintConfig.cpp:3366
#: src/libslic3r/PrintConfig.cpp:3403 src/libslic3r/PrintConfig.cpp:3410
#: src/libslic3r/PrintConfig.cpp:3421 src/libslic3r/PrintConfig.cpp:3431
#: src/libslic3r/PrintConfig.cpp:3440 src/libslic3r/PrintConfig.cpp:3453
#: src/libslic3r/PrintConfig.cpp:3463 src/libslic3r/PrintConfig.cpp:3472
#: src/libslic3r/PrintConfig.cpp:3482 src/libslic3r/PrintConfig.cpp:3493
#: src/libslic3r/PrintConfig.cpp:3501
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:536
#: src/slic3r/GUI/Tab.cpp:4329 src/slic3r/GUI/Tab.cpp:4330
#: src/slic3r/GUI/Tab.cpp:4402 src/libslic3r/PrintConfig.cpp:3509
#: src/libslic3r/PrintConfig.cpp:3516 src/libslic3r/PrintConfig.cpp:3530
#: src/libslic3r/PrintConfig.cpp:3541 src/libslic3r/PrintConfig.cpp:3551
#: src/libslic3r/PrintConfig.cpp:3573 src/libslic3r/PrintConfig.cpp:3584
#: src/libslic3r/PrintConfig.cpp:3591 src/libslic3r/PrintConfig.cpp:3598
#: src/libslic3r/PrintConfig.cpp:3609 src/libslic3r/PrintConfig.cpp:3618
#: src/libslic3r/PrintConfig.cpp:3627
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4347
#: src/slic3r/GUI/Tab.cpp:4348 src/libslic3r/SLA/Hollowing.cpp:72
#: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
#: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3637
#: src/libslic3r/PrintConfig.cpp:3644 src/libslic3r/PrintConfig.cpp:3654
#: src/libslic3r/PrintConfig.cpp:3663
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:161
msgid "Add negative volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:162
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:164
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:300
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:407 src/slic3r/GUI/GUI_Factories.cpp:412
#: src/slic3r/GUI/GUI_Factories.cpp:550 src/slic3r/GUI/GUI_Factories.cpp:556
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:444
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:456
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:461 src/slic3r/GUI/GUI_Factories.cpp:497
#: src/slic3r/GUI/GUI_Factories.cpp:501
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:471
msgid "Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:520
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:529
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:620
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:630 src/slic3r/GUI/GUI_Factories.cpp:642
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:642
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:652
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:680
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:690
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:709
msgid "Export as STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:720
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:727 src/slic3r/GUI/Plater.cpp:3448
#: src/slic3r/GUI/Plater.cpp:3474
msgid "Replace with STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:727
msgid "Replace the selected volume with new STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:734
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:772 src/slic3r/Utils/Repetier.cpp:124
#: src/slic3r/Utils/Repetier.cpp:207 src/libslic3r/PrintConfig.cpp:601
#: src/libslic3r/PrintConfig.cpp:2669
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:789
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:789
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:828 src/slic3r/GUI/Plater.cpp:5582
msgid "Convert from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:829 src/slic3r/GUI/Plater.cpp:5583
msgid "Revert conversion from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:830 src/slic3r/GUI/Plater.cpp:5584
msgid "Convert from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:831 src/slic3r/GUI/Plater.cpp:5584
msgid "Revert conversion from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:852 src/slic3r/GUI/GUI_ObjectList.cpp:2137
#: src/libslic3r/PrintConfig.cpp:4226
msgid "Merge"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:852
msgid "Merge objects to the one multipart object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:871
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:871
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:873
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:873
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:875
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:875
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:878
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:878
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:894 src/slic3r/GUI/GUI_ObjectList.cpp:1697
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:930
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:930 src/slic3r/GUI/GUI_Factories.cpp:951
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:933
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:933 src/slic3r/GUI/GUI_Factories.cpp:972
msgid "Split the selected object into individual parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:937 src/slic3r/GUI/GUI_Factories.cpp:951
#: src/slic3r/GUI/GUI_Factories.cpp:972 src/libslic3r/PrintConfig.cpp:4255
msgid "Split"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:937
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1081
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1084
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1087
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1087
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1091
msgid "Fill bed with instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1091
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:297
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:139
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:479
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:399
msgid "No errors detected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:408
#, possible-c-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:414
#, possible-c-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:416
#, possible-c-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:418
#, possible-c-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:420
#, possible-c-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:422
#, possible-c-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:425 src/slic3r/GUI/GUI_ObjectList.cpp:428
#, possible-c-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:427
msgid "Remaning errors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:435
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:481
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:483
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:487
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:489
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:615
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:630
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:630
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1248
#: src/slic3r/GUI/GUI_ObjectList.cpp:4001
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1254
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1254
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1304
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1305
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1306
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1345
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1346
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1347
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1418
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1418
msgid "Load Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1516 src/slic3r/GUI/Plater.cpp:2313
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1547 src/slic3r/GUI/Plater.cpp:2333
msgid "Loading file"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1555
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1639
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1664
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1728
msgid "Add Shape from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1728
msgid "Add Shapes from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1834
msgid "Remove paint-on supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1841
msgid "Remove paint-on seam"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1848
msgid "Remove Multi Material painting"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1854
msgid "Shift objects to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1860
msgid "Remove variable layer height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1881
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1905
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1921
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1953
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1957
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1980
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1984
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2012
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2144
msgid "Merged"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2232
msgid "Merge all parts to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2264
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2433
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2448
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2481
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2485
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2490
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2496
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2502
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2509
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2509
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2745
msgid "Delete Selected Item"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2938
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3014
#: src/slic3r/GUI/GUI_ObjectList.cpp:3042
#: src/slic3r/GUI/GUI_ObjectList.cpp:3062
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3108
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3112
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3117
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3176
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3495
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3507
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3644
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3645
#: src/slic3r/GUI/GUI_ObjectList.cpp:3784
msgid "Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3645
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3647
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3648
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3649
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3652
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3657
#: src/slic3r/GUI/GUI_ObjectList.cpp:3732 src/slic3r/GUI/Plater.cpp:157
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3779
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3784
msgid "Negative Volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3784
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3784
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3784
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3785
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3790
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4023
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4023
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
#: src/slic3r/GUI/GUI_ObjectList.cpp:4261
#: src/slic3r/GUI/SavePresetDialog.cpp:101
#: src/slic3r/GUI/SavePresetDialog.cpp:109
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4040
#: src/slic3r/GUI/GUI_ObjectList.cpp:4262
#: src/slic3r/GUI/SavePresetDialog.cpp:102
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4096
msgid "Repairing model"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4125
msgid "Fix through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4128
msgid "Fixing through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4158
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4164
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4169
msgid "Repairing was canceled"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4284
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4424
msgid "Set Printable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4424
msgid "Set Unprintable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4426
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4426
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4427
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4427
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:55
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:56
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:85
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:141 src/libslic3r/GCode.cpp:524
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:521
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522
#: src/slic3r/GUI/Mouse3DController.cpp:478
#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:250
#, possible-c-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:336
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:348
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:398
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:400
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414
msgid "Inches"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:523
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:577
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:826
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:860
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:941
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:990
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:993
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:63
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:99
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:105
#, possible-c-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:158
#, possible-c-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:211
msgid "View"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:218 src/libslic3r/PrintConfig.cpp:770
msgid "Height"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:219 src/libslic3r/PrintConfig.cpp:2930
msgid "Width"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/Tab.cpp:1953
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:222 src/slic3r/GUI/Tab.cpp:1928
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:223
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:228
msgid "Show"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:254
msgid "Feature types"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:318
#: src/libslic3r/ExtrusionEntity.cpp:340
msgid "Perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:319
#: src/libslic3r/ExtrusionEntity.cpp:342
msgid "External perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:320
#: src/libslic3r/ExtrusionEntity.cpp:344
msgid "Overhang perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:321
#: src/libslic3r/ExtrusionEntity.cpp:346
msgid "Internal infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:322
#: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:2296
#: src/libslic3r/PrintConfig.cpp:2307
msgid "Solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:323
#: src/libslic3r/ExtrusionEntity.cpp:350 src/libslic3r/PrintConfig.cpp:2788
#: src/libslic3r/PrintConfig.cpp:2800
msgid "Top solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:325
#: src/libslic3r/ExtrusionEntity.cpp:354
msgid "Bridge infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:326
#: src/libslic3r/ExtrusionEntity.cpp:356 src/libslic3r/PrintConfig.cpp:1280
msgid "Gap fill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:248 src/libslic3r/ExtrusionEntity.cpp:327
#: src/libslic3r/ExtrusionEntity.cpp:358
msgid "Skirt/Brim"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:250 src/libslic3r/ExtrusionEntity.cpp:329
#: src/libslic3r/ExtrusionEntity.cpp:362 src/libslic3r/PrintConfig.cpp:2635
msgid "Support material interface"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:251 src/slic3r/GUI/Tab.cpp:1617
#: src/libslic3r/ExtrusionEntity.cpp:330 src/libslic3r/ExtrusionEntity.cpp:364
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:728
msgid "NOTE:"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:729
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:730
msgid "Apply color change automatically"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1057
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1058
msgid "Tool marker"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1059
msgid "Legend/Estimated printing time"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:762
#: src/slic3r/GUI/HintNotification.cpp:788
#: src/slic3r/GUI/NotificationManager.cpp:402
#: src/slic3r/GUI/NotificationManager.cpp:419
msgid "More"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:903
msgid "Open Preferences."
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:995
msgid "Open Documentation in web browser."
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:520
msgid "Edit"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:960 src/slic3r/GUI/Search.cpp:479
msgid "Use for search"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:961 src/slic3r/GUI/Search.cpp:472
msgid "Category"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:963 src/slic3r/GUI/Search.cpp:474
msgid "Search in English"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:170
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:179
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:203
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:249
#, possible-c-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:123
msgid "Filling bed"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:134
msgid "Bed filling canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:135
msgid "Bed filling done."
msgstr ""

#: src/slic3r/GUI/Jobs/Job.cpp:111
msgid "ERROR: not enough resources to execute a new job."
msgstr ""

#: src/slic3r/GUI/Jobs/PlaterJob.cpp:13
msgid "An unexpected error occured: "
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:59
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:77
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:78
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:36
msgid "Choose SLA archive:"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:40
msgid "Import file"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
msgid "Import model and profile"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
msgid "Import profile only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
msgid "Import model only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
msgid "Accurate"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
msgid "Balanced"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:62
msgid "Quick"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:140
msgid "Importing SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:158
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:164
msgid "Importing canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:165
msgid "Importing done."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2360
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2362
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1106
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:77
msgid "New project, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:78
msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:79
msgid "Save project (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:80
msgid "Save project as (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:81
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:83
msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:84
msgid "Import Config from ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:85
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:874
#: src/slic3r/GUI/Plater.cpp:6482 src/libslic3r/PrintConfig.cpp:4126
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6483
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
msgid "Export config"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:90 src/slic3r/GUI/Plater.cpp:857
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:91
msgid "Eject SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Select all objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Deselect all"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:95
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
msgid "Reload plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
#: src/slic3r/GUI/PrintHostDialogs.cpp:208
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/MainFrame.cpp:75
#: src/slic3r/GUI/MainFrame.cpp:1419
msgid "Open new instance"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:47
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
msgid "Commands"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Press to activate selection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Press to activate deselection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Move selection 10 mm in positive Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Move selection 10 mm in negative Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Move selection 10 mm in negative X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Move selection 10 mm in positive X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Any arrow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Movement step set to 1 mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Movement in camera space"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Page Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Rotate selection 45 degrees CCW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Page Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Rotate selection 45 degrees CW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Gizmo SLA hollow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Gizmo FDM paint-on supports"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Gizmo FDM paint-on seam"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Gizmo Multi Material painting"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Unselect gizmo or clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Switch between Editor/Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Collapse/Expand the sidebar"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Minimize application"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:181 src/slic3r/GUI/MainFrame.cpp:284
#: src/slic3r/GUI/MainFrame.cpp:328 src/slic3r/GUI/MainFrame.cpp:440
#: src/slic3r/GUI/MainFrame.cpp:443 src/slic3r/GUI/MainFrame.cpp:465
#: src/slic3r/GUI/MainFrame.cpp:468
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Gizmo move: Press to snap by 1mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
msgid "Gizmo scale: Press to snap by 5%"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:188
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Gizmos"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Set selected items as Printable/Unprintable"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Set default extruder for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Set extruder number for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Objects List"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:205 src/slic3r/GUI/MainFrame.cpp:1524
msgid "Open a G-code file"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207 src/slic3r/GUI/MainFrame.cpp:1358
#: src/slic3r/GUI/MainFrame.cpp:1362 src/slic3r/GUI/MainFrame.cpp:1529
#: src/slic3r/GUI/MainFrame.cpp:1533
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
msgid "Vertical slider - Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
msgid "Vertical slider - Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
msgid "Horizontal slider - Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
msgid "Horizontal slider - Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
msgid "On/Off one layer mode of the vertical slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
msgid "Show/Hide Legend and Estimated printing time"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Show/Hide G-code window"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4438
#: src/slic3r/GUI/Tab.cpp:2766
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
msgid "Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
msgid "Set upper thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
msgid "Set lower thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:238
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
#: src/slic3r/GUI/KBShortcutsDialog.cpp:251
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Vertical Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
msgid "Set left thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Set right thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Horizontal Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:278
msgid "Keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:75 src/slic3r/GUI/MainFrame.cpp:89
#: src/slic3r/GUI/MainFrame.cpp:1419
msgid "Open a new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:91
msgid "G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:1307
msgid "Open G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:89 src/slic3r/GUI/MainFrame.cpp:1540
msgid "Open PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:91
msgid "Open new G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:225
msgid "Closing PrusaSlicer. Current project is modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:232
msgid "PrusaSlicer is closing"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:232
msgid "Closing PrusaSlicer while some presets are modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:330
#: src/slic3r/GUI/Tab.hpp:376 src/slic3r/GUI/Tab.hpp:493
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:334
#: src/slic3r/GUI/MainFrame.cpp:2102 src/slic3r/GUI/MainFrame.cpp:2103
#: src/slic3r/GUI/Tab.hpp:478
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:332
#: src/slic3r/GUI/MainFrame.cpp:2102 src/slic3r/GUI/MainFrame.cpp:2103
#: src/slic3r/GUI/Tab.hpp:405
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:336
#: src/slic3r/GUI/Tab.hpp:446
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:627 src/slic3r/GUI/Plater.cpp:1660
#: src/slic3r/GUI/Plater.cpp:2752
msgid "Untitled"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:650
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1076
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1076
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1078
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1078
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1084
#, possible-c-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1085
#, possible-c-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1091
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1091
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1093
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1093
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1095
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1095
#, possible-c-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1098 src/slic3r/GUI/MainFrame.cpp:1101
#, possible-c-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1098 src/slic3r/GUI/MainFrame.cpp:1101
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1103
msgid "Show Tip of the day"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1103
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1106
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1120
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1120
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1124 src/libslic3r/PrintConfig.cpp:2815
#: src/libslic3r/PrintConfig.cpp:2824
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1124
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1127 src/libslic3r/PrintConfig.cpp:412
#: src/libslic3r/PrintConfig.cpp:421
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1127
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1129
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1129
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1131 src/libslic3r/PrintConfig.cpp:2178
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1131
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1133
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1133
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1135
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1135
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1148
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1148
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1151
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1151
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1156
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1168
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1168 src/slic3r/GUI/MainFrame.cpp:1625
#: src/slic3r/GUI/PrintHostDialogs.cpp:364
msgid "Error"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1193
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1193
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1197 src/slic3r/GUI/MainFrame.cpp:1199
msgid "Save project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1197 src/slic3r/GUI/MainFrame.cpp:1199
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Import STL/OBJ/AM&F/3MF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Import STL (imperial units)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Load an model saved with imperial units"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1215
msgid "Import SL1 / SL1S archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1215
msgid "Load an SL1 / Sl1S archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1220
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1220
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1223
msgid "Import Config from &project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1223
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1227
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1227
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1230
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1233 src/slic3r/GUI/MainFrame.cpp:1585
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1233
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1237 src/slic3r/GUI/MainFrame.cpp:1586
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1237
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1241
msgid "Export G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1241
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1245
msgid "Export plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1245
msgid "Export current plate as STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1248
msgid "Export plate as STL &including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1248
msgid "Export current plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1256 src/slic3r/GUI/MainFrame.cpp:1537
msgid "Export &toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1256 src/slic3r/GUI/MainFrame.cpp:1537
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1260
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1260
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1263
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1263
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1266
msgid "Export Config Bundle With Physical Printers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1266
msgid "Export all presets including physical printers to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1269
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1271
msgid "Ejec&t SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1271
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1279
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1279
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1285
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1285
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1291
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1291
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1299
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1299
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1303
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1303
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1307
msgid "&G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1310 src/slic3r/GUI/MainFrame.cpp:1544
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1310 src/slic3r/GUI/MainFrame.cpp:1544
#, possible-c-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1325
msgid "&Select all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1326
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1328
msgid "D&eselect all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1329
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1332
msgid "&Delete selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1333
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1335
msgid "Delete &all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1336
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1340
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1343
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1349
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1351
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1352
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1357 src/slic3r/GUI/MainFrame.cpp:1361
#: src/slic3r/GUI/MainFrame.cpp:1528 src/slic3r/GUI/MainFrame.cpp:1532
msgid "Re&load from disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1367
msgid "Searc&h"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1368
msgid "Search in settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1376
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1376
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1381
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1381
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384 src/slic3r/GUI/MainFrame.cpp:1588
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1394
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1394
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1397
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1397
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1403
msgid "Open the dialog to modify shape gallery"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1415
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1415
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1423
msgid "Compare presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1433
msgid "Show &labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1433
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1436
msgid "&Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1436 src/slic3r/GUI/Plater.cpp:2240
msgid "Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1441
msgid "&Full screen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1441
msgid "Full screen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1456 src/slic3r/GUI/MainFrame.cpp:1559
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1457
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1458
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1459 src/slic3r/GUI/MainFrame.cpp:1560
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1462 src/slic3r/GUI/MainFrame.cpp:1563
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1524
msgid "&Open G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1540
msgid "Open &PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1585
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1586
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1588
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1612
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1624
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1631
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1631
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1632
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1667
#, possible-c-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1667
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1667
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1679
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1688 src/slic3r/GUI/Plater.cpp:3236
#: src/slic3r/GUI/Plater.cpp:5992 src/slic3r/GUI/Tab.cpp:1649
#: src/slic3r/GUI/Tab.cpp:4355
msgid "Slicing"
msgstr ""

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:1690
#, possible-c-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1713
msgid "%1% was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1716
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1732
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1742
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1753
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1753 src/libslic3r/PrintConfig.cpp:4231
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1767
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1784
msgid "Loading of a configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1786 src/slic3r/GUI/MainFrame.cpp:1851
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1815
msgid "Exporting configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1816
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1825
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1848
msgid "Loading of a configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1878
#, possible-c-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:453
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:464
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:472
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:484
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:490
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:505
msgid "Options:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Swap Y/Z axes"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:171
#, possible-c-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:172
#, possible-c-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:191
#, possible-c-format
msgid "%s warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:192
#, possible-c-format
msgid "%s has a warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:205 src/slic3r/GUI/MsgDialog.cpp:218
#, possible-c-format
msgid "%s info"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:246
#, possible-c-format
msgid "%s information"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:36
msgid "3D Mouse disconnected."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:37
msgid "Configuration update is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:37
msgid "See more."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:45
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:48
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:50
msgid "Desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:52
msgid "Desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:54
msgid "Undo desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:56
msgid "Undo desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:57
msgid "Exporting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:691
msgid "Open Folder."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:728
msgid "Eject drive"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:961
msgid "ERROR"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:966
msgid "CANCELED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:971
msgid "COMPLETED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1013
msgid "Cancel upload"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1072
#, possible-c-format
msgid "%1$d Object was loaded with custom supports."
msgid_plural "%1$d Objects were loaded with custom supports."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1073
#, possible-c-format
msgid "%1$d Object was loaded with custom seam."
msgid_plural "%1$d Objects were loaded with custom seam."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1074
#, possible-c-format
msgid "%1$d Object was loaded with multimaterial painting."
msgid_plural "%1$d Objects were loaded with multimaterial painting."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1075
#, possible-c-format
msgid "%1$d Object was loaded with variable layer height."
msgid_plural "%1$d Objects were loaded with variable layer height."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1076
#, possible-c-format
msgid "%1$d Object was loaded with partial sinking."
msgid_plural "%1$d Objects were loaded with partial sinking."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1173
#: src/slic3r/GUI/NotificationManager.cpp:1187
msgid "Export G-Code."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1173
#: src/slic3r/GUI/NotificationManager.cpp:1187
msgid "Export."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1187
msgid "Slicing finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1521
#: src/slic3r/GUI/NotificationManager.cpp:1528
#: src/slic3r/GUI/NotificationManager.cpp:1544
#: src/slic3r/GUI/NotificationManager.cpp:1550
#: src/slic3r/GUI/NotificationManager.cpp:1621
msgid "ERROR:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1533
#: src/slic3r/GUI/NotificationManager.cpp:1560
#: src/slic3r/GUI/NotificationManager.cpp:1568
#: src/slic3r/GUI/NotificationManager.cpp:1579 src/slic3r/GUI/Plater.cpp:3104
msgid "WARNING:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1672
msgid "Exporting finished."
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:50
msgid "Paint-on seam"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:52
msgid "Sinking"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:98
#: src/slic3r/GUI/ObjectDataViewModel.cpp:266
#, possible-c-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4199
#: src/slic3r/GUI/Tab.cpp:4284
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:134
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:257
#, possible-c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:260
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:263
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:265
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:273
#, possible-c-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:274
msgid "Error loading shaders"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:347
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:347
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
msgid "Delete this preset from this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:83
msgid "This printer will be shown in the presets list as"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
msgid "Type here the name of your printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Descriptive name for the printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
msgid "Add preset for this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2192
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:268
msgid "Connection to printers connected via the print host failed."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:310
msgid "Test"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:315
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337
msgid "Refresh Printers"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:374
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:404
#: src/libslic3r/PrintConfig.cpp:297
msgid "HTTPS CA File"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:405
#, possible-c-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:406
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:625
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:629
msgid "You should change the name of your printer device."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:637
msgid "Printer with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:638
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:665
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:715
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:178
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:179
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:180
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:238
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:258 src/slic3r/GUI/Plater.cpp:1297
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:259 src/slic3r/GUI/Plater.cpp:1309
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:260 src/slic3r/GUI/Plater.cpp:1316
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:261
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:262
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:263 src/slic3r/GUI/Plater.cpp:1279
#: src/slic3r/GUI/Plater.cpp:1366
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:264
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:393
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:395 src/libslic3r/PrintConfig.cpp:2492
#: src/libslic3r/PrintConfig.cpp:3402
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:396 src/slic3r/GUI/Plater.cpp:525
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:397
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:429 src/slic3r/GUI/Tab.cpp:1528
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:431
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:439
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:539
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:541
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:542
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:855 src/slic3r/GUI/Plater.cpp:6483
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:875 src/slic3r/GUI/Plater.cpp:3236
#: src/slic3r/GUI/Plater.cpp:5995
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1048
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1228
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1254
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1257
msgid "object"
msgid_plural "objects"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1257
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1297
msgid "Used Filament (in)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1299 src/slic3r/GUI/Plater.cpp:1352
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1299 src/slic3r/GUI/Plater.cpp:1352
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1309
msgid "Used Filament (in³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1335
msgid "Filament at extruder %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1341
msgid "(including spool)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1350 src/libslic3r/PrintConfig.cpp:1032
#: src/libslic3r/PrintConfig.cpp:3217 src/libslic3r/PrintConfig.cpp:3218
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1368
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1375
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1612
msgid "Fill bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1618
msgid "Optimize Rotation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1624
msgid "Import SLA archive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1662
msgid "Do you want to save the changes to \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2114
#, possible-c-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2119
#, possible-c-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2138 src/slic3r/GUI/Plater.cpp:5059
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2239
msgid "Expand sidebar"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2420
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2450
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2470
#, possible-c-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2474
msgid "The size of the object is zero"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2487
#, possible-c-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2491 src/slic3r/GUI/Plater.cpp:2513
msgid "The object is too small"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2492 src/slic3r/GUI/Plater.cpp:2514
msgid "Apply to all the remaining small objects being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2509
#, possible-c-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2527
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2530 src/slic3r/GUI/Plater.cpp:2585
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2538
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2539
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2559
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2582
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2702
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2703
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2780
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2787
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2793
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2799
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2896
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2907
msgid "Delete All Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2933
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3014
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3021
msgid "All non-solid parts (modifiers) were deleted"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3023
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3086
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3088
msgid "Enable supports for enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3217 src/slic3r/GUI/Plater.cpp:4134
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3287
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3346 src/slic3r/GUI/Plater.cpp:3453
msgid "Replace from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3362 src/slic3r/GUI/Plater.cpp:3469
msgid "Unable to replace with more than one volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3362 src/slic3r/GUI/Plater.cpp:3442
#: src/slic3r/GUI/Plater.cpp:3469
msgid "Error during replace"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3434
msgid "Select the new file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3442
msgid "File for the replace wasn't selected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3604
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3636 src/slic3r/GUI/Plater.cpp:5186
msgid "The selected file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3637
msgid "differs from the original file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3637
msgid "Do you want to replace it"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3644
msgid "It is not allowed to change the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3644
msgid "Do you want to retry"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3668
msgid "Reload from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3770
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3775
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3793
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4088
msgid "There are active warnings concerning sliced models:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4099
msgid "generated warnings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4430
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4845
msgid "Undo / Redo is processing"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4847
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5043
msgid "Creating a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5046
msgid "Creating a new project while some presets are modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5047
msgid "You can keep presets modifications to the new project or discard them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5048
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved than new project wouldn't keep them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5054
msgid "Creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5085
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5111 src/slic3r/GUI/Plater.cpp:5370
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5115
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5186
msgid "does not contain valid gcode."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5187
msgid "Error while loading .gcode file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5240
#, possible-c-format
msgid "%s - Drop project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5247
msgid "Open as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5248
msgid "Import geometry only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5249
msgid "Import config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5252
msgid "Select an action to apply to the file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5257
msgid "Action"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5273
msgid "Don't show again"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5314
msgid "You can open only one .gcode file at a time."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5315
msgid "Drag and drop G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5392
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5397
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5442
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5453
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5461
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5495
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5546
msgid "Enter the number of copies:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5547
msgid "Copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5551
#, possible-c-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5624
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5684
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5684
msgid "Save SL1 / SL1S file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5881
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5881
msgid "Save project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6482
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6516
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"repairing the mesh."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6630
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:107 src/slic3r/GUI/Tab.cpp:2227
#: src/slic3r/GUI/Tab.cpp:2450 src/slic3r/GUI/Tab.cpp:2560
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:120
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:122
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:128
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:130
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:136
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:138
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:147
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:149
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:158
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:165
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:176
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:181
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:183
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:189
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:191
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:199
msgid "Show drop project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:201
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application, shows a dialog asking to select the action to take on the file "
"to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:207 src/slic3r/GUI/Preferences.cpp:211
msgid "Allow just a single PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:209
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:213
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:221
msgid ""
"Ask to save unsaved changes when closing the application or when loading a "
"new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:223
msgid ""
"Always ask for unsaved changes, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:230
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
msgid "Ask for unsaved changes when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:232
msgid ""
"Always ask for unsaved changes when selecting new preset or resetting a "
"preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:237
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
msgid "Ask for unsaved changes when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:239
msgid "Always ask for unsaved changes when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:246
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:248
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:256
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:258
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:268 src/slic3r/GUI/Preferences.cpp:270
msgid "Show splash screen"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:276
msgid "Clear Undo / Redo stack on new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:278
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:284
msgid "Enable support for legacy 3DConnexion devices"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:286
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:295
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:300
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:302
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:307
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:309
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:314
msgid "Reverse direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:316
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:324
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:347
msgid "Sequential slider applied only to top layer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:349
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer.If disabled, changes made using the sequential slider, in "
"preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:356
msgid "Show sidebar collapse/expand button"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:358
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:363
msgid "Suppress to open hyperlink in browser"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:365
msgid ""
"If enabled, the descriptions of configuration parameters in settings tabs "
"wouldn't work as hyperlinks. If disabled, the descriptions of configuration "
"parameters in settings tabs will work as hyperlinks."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:371
msgid "Use colors for axes values in Manipulation panel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:373
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:379
msgid "Order object volumes by types"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:381
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:388
msgid "Set settings tabs as menu items (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:390
msgid ""
"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
"will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:399
msgid "Show \"Tip of the day\" notification after start"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:401
msgid "If enabled, useful hints are displayed at startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:407
msgid "Notify about new releases"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:409
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:415
msgid "Release only"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:424
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:426
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:451
msgid "Render"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:456
msgid "Use environment map"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:458
msgid "If enabled, renders object using the environment map."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:471
msgid "Dark mode IU (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:476
msgid "Enable dark mode"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:478
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:484
msgid "Use system menu for application"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:486
msgid ""
"If enabled, application will use standart Windows system menu,\n"
"but on some combination od display scales it can looks ugly. If disabled, "
"old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:543
msgid "Changes for the critical options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:545
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:653
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:668
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:702 src/slic3r/GUI/Preferences.cpp:713
msgid "Old regular layout with the tab bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:703
msgid "New layout, access via settings button in the top menu"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:704 src/slic3r/GUI/Preferences.cpp:714
msgid "Settings in non-modal window"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:722
msgid "Layout Options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:765
msgid "Text colors"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:249
#: src/slic3r/GUI/PresetComboBoxes.cpp:287
#: src/slic3r/GUI/PresetComboBoxes.cpp:794
#: src/slic3r/GUI/PresetComboBoxes.cpp:846
#: src/slic3r/GUI/PresetComboBoxes.cpp:986
#: src/slic3r/GUI/PresetComboBoxes.cpp:1030
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:291
#: src/slic3r/GUI/PresetComboBoxes.cpp:850
#: src/slic3r/GUI/PresetComboBoxes.cpp:1034
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:302
msgid "Incompatible presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:337
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:340
msgid "Delete Physical Printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:581
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:697
#: src/slic3r/GUI/PresetComboBoxes.cpp:737
msgid "Add/Remove presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:702
#: src/slic3r/GUI/PresetComboBoxes.cpp:742 src/slic3r/GUI/Tab.cpp:3181
msgid "Add physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:716
msgid "Edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:722
msgid "Change extruder color"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:730 src/slic3r/GUI/Tab.cpp:3181
msgid "Edit physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:733
msgid "Delete physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:861
#: src/slic3r/GUI/PresetComboBoxes.cpp:1048
msgid "Physical printers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:885
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:887
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:889
#: src/slic3r/GUI/PresetComboBoxes.cpp:1072
msgid "Add/Remove printers"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:32
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:40
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:44
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
msgid "During the other layers, fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
msgid "Fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:59
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:61
msgid "except for the first layer."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "During the other layers, fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "Fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:170
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:178
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:197
#, possible-c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:215
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:221
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:236
#, possible-c-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:240
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:282
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:285
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:288
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:301
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:304
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:307
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:51
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:60
msgid "Group"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:83
msgid "Upload and Print"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:89
#: src/slic3r/GUI/PrintHostDialogs.cpp:106
#, possible-c-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:100
msgid "Upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:238
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:239
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:240
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:241
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:242
msgctxt "OfFile"
msgid "Size"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:243
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:244
msgid "Error Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:247
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:249
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:307
#: src/slic3r/GUI/PrintHostDialogs.cpp:362
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:363
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:365
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:366
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:367
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:415
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:29
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:114
#: src/libslic3r/PrintConfig.cpp:916 src/libslic3r/PrintConfig.cpp:960
#: src/libslic3r/PrintConfig.cpp:975 src/libslic3r/PrintConfig.cpp:3108
#: src/libslic3r/PrintConfig.cpp:3117 src/libslic3r/PrintConfig.cpp:3234
#: src/libslic3r/PrintConfig.cpp:3242 src/libslic3r/PrintConfig.cpp:3250
#: src/libslic3r/PrintConfig.cpp:3257 src/libslic3r/PrintConfig.cpp:3265
#: src/libslic3r/PrintConfig.cpp:3273
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:95
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:873
#: src/libslic3r/PrintConfig.cpp:1751
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:57
#, possible-c-format
msgid "Save %s as:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:110
msgid "the following suffix is not allowed:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:116
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:122
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:127
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:134
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:136
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:137
msgid "Note: This preset will be replaced after saving"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:142
msgid "The name cannot be empty."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:147
msgid "The name cannot start with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:152
msgid "The name cannot end with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:157
msgid "The name cannot be the same as a preset alias name."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:191
#: src/slic3r/GUI/SavePresetDialog.cpp:197
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:221
msgctxt "PresetName"
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:283
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:322
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:325
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:326
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:327
msgid "Just switch to \"%1%\" preset"
msgstr ""

#: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345
#: src/slic3r/GUI/Tab.cpp:2588
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345
#: src/slic3r/GUI/Tab.cpp:2582
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:169
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:210
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:242
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:261
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:279
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:298
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:395
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:420
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:982
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:114
msgid "Data to send"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:550
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:621
msgid "Send system info"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:584
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:588
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
msgid "Is it safe?"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:593
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:617
msgid "Show verbatim data that will be sent"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:619
msgid "Ask me next time"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:620
msgid "Do not send anything"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:703
msgid "System info sent successfully. Thank you."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:706
msgid "Sending system info failed!"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:713
msgid "Sending system info was cancelled."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:720
msgid "Sending system info..."
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:84
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:150
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:162
msgid "Eigen vectorization supported:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:169
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:114 src/libslic3r/PrintConfig.cpp:531
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:115
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:120 src/libslic3r/PrintConfig.cpp:546
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:121
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:216
msgid "Compare this preset with some another"
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:218
#, possible-c-format
msgid "Save current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:219
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:223
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:227
msgid "Search in settings [%1%]"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1285
msgid "Detach from system preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1298
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1299
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1302
msgid "Modifications to the current profile will be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1308
msgid "Detach preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1334
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1336
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1338
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1342
msgid "Current preset is inherited from"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1346
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1347
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1348
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1352
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1358
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1366
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1369
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1383
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1387
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1395
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1396
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1434 src/slic3r/GUI/Tab.cpp:4282
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1440
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1452
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1453 src/libslic3r/PrintConfig.cpp:2320
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1458
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1469
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1483
msgid "Fuzzy skin (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1506
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1521 src/libslic3r/ExtrusionEntity.cpp:358
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1543
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1548
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1568
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1581
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1585
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1589
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1597
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1605
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1613
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1633
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1643
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1646
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1656
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1659 src/slic3r/GUI/Tab.cpp:4359
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1660
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1662
msgid "Extruder clearance"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1667 src/slic3r/GUI/Tab.cpp:4360
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1674 src/libslic3r/PrintConfig.cpp:1958
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1680 src/slic3r/GUI/Tab.cpp:1681
#: src/slic3r/GUI/Tab.cpp:2047 src/slic3r/GUI/Tab.cpp:2048
#: src/slic3r/GUI/Tab.cpp:2431 src/slic3r/GUI/Tab.cpp:2432
#: src/slic3r/GUI/Tab.cpp:2507 src/slic3r/GUI/Tab.cpp:2508
#: src/slic3r/GUI/Tab.cpp:4222 src/slic3r/GUI/Tab.cpp:4223
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1687 src/slic3r/GUI/Tab.cpp:2055
#: src/slic3r/GUI/Tab.cpp:2438 src/slic3r/GUI/Tab.cpp:2514
#: src/slic3r/GUI/Tab.cpp:4230 src/slic3r/GUI/Tab.cpp:4365
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1688 src/slic3r/GUI/Tab.cpp:2056
#: src/slic3r/GUI/Tab.cpp:2439 src/slic3r/GUI/Tab.cpp:2515
#: src/slic3r/GUI/Tab.cpp:4231 src/slic3r/GUI/Tab.cpp:4366
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1787
#, possible-c-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:1792
msgid "Found reserved keywords in"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1806
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1929
msgid "Nozzle"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1934
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1939
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1941 src/libslic3r/PrintConfig.cpp:1861
#: src/libslic3r/PrintConfig.cpp:2892
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1952
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1963
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1969
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1976
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1986
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1989
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2002
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2026 src/slic3r/GUI/Tab.cpp:2343
#: src/slic3r/GUI/Tab.cpp:3897 src/libslic3r/GCode.cpp:716
#: src/libslic3r/PrintConfig.cpp:2403
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2027 src/slic3r/GUI/Tab.cpp:2344
#: src/libslic3r/GCode.cpp:690 src/libslic3r/PrintConfig.cpp:2353
#: src/libslic3r/PrintConfig.cpp:2368
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2037 src/slic3r/GUI/Tab.cpp:2354
#: src/libslic3r/GCode.cpp:691 src/libslic3r/PrintConfig.cpp:651
#: src/libslic3r/PrintConfig.cpp:661
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2090
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2194
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2228 src/slic3r/GUI/Tab.cpp:2451
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2237 src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2242
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2271
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2275 src/slic3r/GUI/Tab.cpp:2716
#: src/libslic3r/PrintConfig.cpp:1827
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2364 src/libslic3r/GCode.cpp:692
#: src/libslic3r/PrintConfig.cpp:391
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2374 src/libslic3r/GCode.cpp:693
#: src/libslic3r/PrintConfig.cpp:1553
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2384 src/libslic3r/GCode.cpp:694
#: src/libslic3r/PrintConfig.cpp:2776
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2394 src/libslic3r/GCode.cpp:695
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2404 src/libslic3r/GCode.cpp:696
msgid "Color Change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2413 src/libslic3r/GCode.cpp:697
#: src/libslic3r/PrintConfig.cpp:2394
msgid "Pause Print G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2422 src/libslic3r/GCode.cpp:698
msgid "Template Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2458
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2473
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2474
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2480 src/slic3r/GUI/Tab.cpp:4206
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:4202
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2558 src/slic3r/GUI/Tab.cpp:2643
#: src/libslic3r/PrintConfig.cpp:1582 src/libslic3r/PrintConfig.cpp:1617
#: src/libslic3r/PrintConfig.cpp:1634 src/libslic3r/PrintConfig.cpp:1651
#: src/libslic3r/PrintConfig.cpp:1667 src/libslic3r/PrintConfig.cpp:1677
#: src/libslic3r/PrintConfig.cpp:1687 src/libslic3r/PrintConfig.cpp:1700
#: src/libslic3r/PrintConfig.cpp:1710
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2581
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2587
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2596
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2601
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2610
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2615
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2668 src/slic3r/GUI/Tab.cpp:2677
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2678
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2713
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2738
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2743
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2749
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2762
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2769
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2949
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2951
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3252
msgid "New printer preset selected"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3558
msgid "Detached"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3624
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3624
msgid "delete"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3633
msgid "It's a last preset for this physical printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3638
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3650
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3655
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3660
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3665
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3670
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3675
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3758 src/slic3r/GUI/Tab.cpp:3831
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3923
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3926
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3930
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3952
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3954
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3956
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3958
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3963
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3965
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3968
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3970
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3980
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3982
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3985
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3988
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3990
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3996
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3997
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4003
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4004
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4158 src/slic3r/GUI/Tab.cpp:4160
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4292
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4297
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4320
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4325
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4400
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4402 src/libslic3r/PrintConfig.cpp:3481
msgid "Object elevation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4402 src/libslic3r/PrintConfig.cpp:3583
msgid "Pad around object"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1050
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1103
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1118
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1133
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1148
msgid "Undef"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
msgid "Switching Presets: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
msgid "Old Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
msgid "New Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
msgid "Keep"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
msgid "Transfer"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
msgid "Don't save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
msgid "Discard"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
msgid "Save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
msgid "Ask for unsaved changes when ??closing application??"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
msgid ""
"You will not be asked about the unsaved changes the next time you create new "
"project"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
msgid ""
"You will not be asked about the unsaved changes the next time you switch a "
"preset"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
msgid ""
"You will not be asked about the unsaved changes the next time you: \n"
"- close the application,\n"
"- load project,\n"
"- process Undo / Redo with a change of print technology,\n"
"- take/load snapshot,\n"
"- load config file/bundle,\n"
"- export config_bundle"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
msgid "PrusaSlicer will remember your action."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:907
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:909
msgid "PrusaSlicer: Don't ask me again"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:939
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
msgid "All settings changes will not be saved"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
msgid "All settings changes will be discarded."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:944
msgid "Save the selected options."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:945
msgid "Keep the selected settings."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
msgid "Transfer the selected settings to the newly selected preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:950
msgid "Save the selected options to preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:951
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1218
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1229
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1275
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1663
msgid "Extruders count"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1497
msgid "Show all preset (including incompatible)"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1512
msgid "Left Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1513
msgid "Right Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1558
msgid "Compare Presets"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1558
msgid "Compare %1% Presets"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1620
msgid "One of the presets doesn't found"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1631
msgid "Compared presets has different printer technology"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1645
msgid "Presets are the same"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1653
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1677
msgid "Undef category"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1677
msgid "Undef group"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, possible-c-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:53
msgid "Changelog && Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:128
#: src/slic3r/GUI/UpdateDialogs.cpp:185
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Opening Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:254
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:90
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed. "
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:95
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:116 src/slic3r/GUI/UpdateDialogs.cpp:175
msgid "Comment:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:136
msgid "Install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
msgid "Don't install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151 src/slic3r/GUI/UpdateDialogs.cpp:205
#, possible-c-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
msgid "You must install a configuration update."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:154
#, possible-c-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:193 src/slic3r/GUI/UpdateDialogs.cpp:240
#, possible-c-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:206
#, possible-c-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:209
#, possible-c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:218
#, possible-c-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:223
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:239
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:258
#, possible-c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:275
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:292
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:292
msgid "No updates available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:297
#, possible-c-format
msgid "%s has no configuration updates available."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:21
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:54
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:114
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:116
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:120
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:122
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:173
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:299
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:308
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:309
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:352
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:361
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:362
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:376
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:442
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:454
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:454
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:643
#, possible-c-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:644
#, possible-c-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:69
#: src/slic3r/Utils/Repetier.cpp:69
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:84
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:90
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:92
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:145
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:148
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:221
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:237
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:244
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:250
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:253
#: src/slic3r/Utils/FixModelByWin10.cpp:386
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:265
#: src/slic3r/Utils/FixModelByWin10.cpp:272
#: src/slic3r/Utils/FixModelByWin10.cpp:304
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:376
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:392
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:394
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:398
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:410
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:416
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:74
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:76
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:87
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:93
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:95
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:192
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:198
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:236
msgid "Connection to PrusaLink works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:242
msgid "Could not connect to PrusaLink"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:61
msgid "Copying of file %1% to %2% failed: %3%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:645
#: src/slic3r/Utils/PresetUpdater.cpp:662
msgid "Continue and install configuration updates?"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:777
msgid ""
"Configuration Updates causes a lost of preset modification.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:779
msgid "Updating"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:808
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:812
#, possible-c-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:815
#, possible-c-format
msgid "requires max. %s"
msgstr ""

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""

#: src/slic3r/Utils/Http.cpp:78
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""

#: src/slic3r/Utils/Http.cpp:82
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""

#: src/slic3r/Utils/Process.cpp:157
msgid "Open G-code file:"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:84
msgid "Connection to Repetier works correctly."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:90
msgid "Could not connect to Repetier"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:92
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:244
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:251
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:264
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/libslic3r/GCode.cpp:523
msgid "There is an object with no extrusions in the first layer."
msgstr ""

#: src/libslic3r/GCode.cpp:553
msgid "Empty layer between %1% and %2%."
msgstr ""

#: src/libslic3r/GCode.cpp:556
msgid "(Some lines not shown)"
msgstr ""

#: src/libslic3r/GCode.cpp:558
msgid "Object name: %1%"
msgstr ""

#: src/libslic3r/GCode.cpp:559
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""

#: src/libslic3r/GCode.cpp:701
msgid "Filament Start G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:708
msgid "Filament End G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:747
msgid "In the custom G-code were found reserved keywords:"
msgstr ""

#: src/libslic3r/GCode.cpp:749
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr ""

#: src/libslic3r/GCode.cpp:1403
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""

#: src/libslic3r/ExtrusionEntity.cpp:332 src/libslic3r/ExtrusionEntity.cpp:368
msgid "Mixed"
msgstr ""

#: src/libslic3r/Flow.cpp:61
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1734
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1745
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1749
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1753
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:993
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Print.cpp:445
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:448
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:452
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:454
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:463
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""

#: src/libslic3r/Print.cpp:467
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:480
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:486
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
"RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:488
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:490
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""

#: src/libslic3r/Print.cpp:492
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:494
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:515
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:517
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:520
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:522
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:535
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:557
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:570
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:573
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:584
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:592
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:596
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/libslic3r/Print.cpp:632
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:637
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:791
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:813
msgid "Generating skirt and brim"
msgstr ""

#: src/libslic3r/Print.cpp:861
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:865
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:533
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:628
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:640
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:646
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:661
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:668
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:784
msgid "Slicing done"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:45
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:46
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:47
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:48 src/libslic3r/SLAPrintSteps.cpp:630
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:49
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:50
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:51
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:66
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:67
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:426
msgid "Too many overlapping holes."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:433
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:441
msgid "Unable to drill the current configuration of holes into the model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:461
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:467
msgid "Failed to drill some holes into the model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:511
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:682 src/libslic3r/SLAPrintSteps.cpp:691
#: src/libslic3r/SLAPrintSteps.cpp:729
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:721
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:845
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:84
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:213 src/libslic3r/PrintConfig.cpp:214
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:221
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:226
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:231
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:236
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:238
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:246
msgid "G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:247
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
"following format: \"XxY, XxY, ...\""
msgstr ""

#: src/libslic3r/PrintConfig.cpp:255
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:262
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:263
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:271
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:272
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:281
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:282
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:290
msgid "Name of the printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:298
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:314
msgid "Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:322
msgid "Ignore HTTPS certificate revocation checks"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:323
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:330
msgid "Printer preset names"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:331
msgid "Names of presets related to the physical printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:336
msgid "Authorization Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:341
msgid "API key"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:342
msgid "HTTP digest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:362
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:363
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:370
msgid "Avoid crossing perimeters - Max detour length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:372
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:375
msgid "mm or % (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:381 src/libslic3r/PrintConfig.cpp:2738
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:382
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:385
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:392
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:402
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:403
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:414
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:415
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:423
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:425
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:431
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:432
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:434 src/libslic3r/PrintConfig.cpp:605
#: src/libslic3r/PrintConfig.cpp:1150 src/libslic3r/PrintConfig.cpp:1159
#: src/libslic3r/PrintConfig.cpp:1350 src/libslic3r/PrintConfig.cpp:1640
#: src/libslic3r/PrintConfig.cpp:1691 src/libslic3r/PrintConfig.cpp:1702
#: src/libslic3r/PrintConfig.cpp:1712 src/libslic3r/PrintConfig.cpp:1908
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:440
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:442
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:1062
#: src/libslic3r/PrintConfig.cpp:2186 src/libslic3r/PrintConfig.cpp:2196
#: src/libslic3r/PrintConfig.cpp:2485 src/libslic3r/PrintConfig.cpp:2723
#: src/libslic3r/PrintConfig.cpp:2939 src/libslic3r/PrintConfig.cpp:3455
#: src/libslic3r/PrintConfig.cpp:3576
msgid "°"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:451
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:452
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:453 src/libslic3r/PrintConfig.cpp:1074
#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1720
#: src/libslic3r/PrintConfig.cpp:1783 src/libslic3r/PrintConfig.cpp:2031
#: src/libslic3r/PrintConfig.cpp:2078 src/libslic3r/PrintConfig.cpp:3125
#: src/libslic3r/PrintConfig.cpp:3369 src/libslic3r/PrintConfig.cpp:3495
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:460
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:462
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:472
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:474
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:475 src/libslic3r/PrintConfig.cpp:881
#: src/libslic3r/PrintConfig.cpp:889 src/libslic3r/PrintConfig.cpp:898
#: src/libslic3r/PrintConfig.cpp:906 src/libslic3r/PrintConfig.cpp:933
#: src/libslic3r/PrintConfig.cpp:952 src/libslic3r/PrintConfig.cpp:1284
#: src/libslic3r/PrintConfig.cpp:1465 src/libslic3r/PrintConfig.cpp:1547
#: src/libslic3r/PrintConfig.cpp:1623 src/libslic3r/PrintConfig.cpp:1657
#: src/libslic3r/PrintConfig.cpp:1669 src/libslic3r/PrintConfig.cpp:1679
#: src/libslic3r/PrintConfig.cpp:1742 src/libslic3r/PrintConfig.cpp:1801
#: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:2153
#: src/libslic3r/PrintConfig.cpp:2162 src/libslic3r/PrintConfig.cpp:2688
#: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2847
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:482
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:484
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:493
msgid "Brim type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:495
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:501
msgid "No brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:502
msgid "Outer brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:503
msgid "Inner brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:504
msgid "Outer and inner brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:509
msgid "Brim separation gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:511
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:518
msgid "Clip multi-part objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:519
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:526
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:527
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:537
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:538
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:552
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:553
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:570
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:571
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:579
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:580
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:585
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:586
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:593
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:594
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:602
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:611
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:612
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:618
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:619 src/libslic3r/PrintConfig.cpp:3299
#: src/libslic3r/PrintConfig.cpp:3310
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:625
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:626
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:635
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:637
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:643
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:644
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:652
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:662
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:673
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:675
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:681
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:683
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:693 src/libslic3r/PrintConfig.cpp:1128
#: src/libslic3r/PrintConfig.cpp:2653 src/libslic3r/PrintConfig.cpp:2670
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:694
msgid "Monotonic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:695 src/libslic3r/PrintConfig.cpp:1129
msgid "Aligned Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:696 src/libslic3r/PrintConfig.cpp:1135
#: src/libslic3r/PrintConfig.cpp:2671
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:697 src/libslic3r/PrintConfig.cpp:1139
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:698 src/libslic3r/PrintConfig.cpp:1140
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:699 src/libslic3r/PrintConfig.cpp:1141
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:705
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:707
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:716 src/libslic3r/PrintConfig.cpp:727
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:718
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:721 src/libslic3r/PrintConfig.cpp:831
#: src/libslic3r/PrintConfig.cpp:1181 src/libslic3r/PrintConfig.cpp:1375
#: src/libslic3r/PrintConfig.cpp:1430 src/libslic3r/PrintConfig.cpp:1456
#: src/libslic3r/PrintConfig.cpp:1928 src/libslic3r/PrintConfig.cpp:2301
#: src/libslic3r/PrintConfig.cpp:2474 src/libslic3r/PrintConfig.cpp:2561
#: src/libslic3r/PrintConfig.cpp:2794
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:729
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:1201
#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:2260
#: src/libslic3r/PrintConfig.cpp:2312 src/libslic3r/PrintConfig.cpp:2639
#: src/libslic3r/PrintConfig.cpp:2807
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:739
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:741
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:747
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:749
#, possible-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:759
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:771
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:782
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:792
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:793 src/libslic3r/PrintConfig.cpp:855
#: src/libslic3r/PrintConfig.cpp:3172
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:799
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:800
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:809
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:810
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:815
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:816
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:825
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:827
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:838
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:839
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:844
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:845
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:847 src/libslic3r/PrintConfig.cpp:2248
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:3171
msgid "Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:860
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:861
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:869 src/libslic3r/PrintConfig.cpp:1748
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:870
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:879
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:880
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:887
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:888
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:895
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:896
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:904
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:905
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:912
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:913
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:922
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:923
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:931
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:932
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:939
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:940
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:944
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:950
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:951
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:958
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:959
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:966
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:967
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:973
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:974
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:982
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:3210
#: src/libslic3r/PrintConfig.cpp:3211
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:990
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:993
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:998
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:999
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1026
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1027
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1033
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1034
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1039
msgid "Spool weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1040
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1044
msgid "g"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1053 src/libslic3r/PrintConfig.cpp:3294
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1057
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1059
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1071
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1073
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1108
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1110
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:2702
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1132
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1133
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1134
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1136 src/libslic3r/PrintConfig.cpp:2655
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1137
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1138
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1142
msgid "Adaptive Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1143
msgid "Support Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1148
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1156
msgid "First object layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1157
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1166
msgid "First layer bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1167
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1177
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1190
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1197
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1198
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1207
msgid "Speed of object first layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1208
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1218
msgid "First layer nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1219
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1227
msgid "Full fan speed at layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1228
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1240
msgid "Fuzzy skin type."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1247
msgid "Outside walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1248
msgid "All walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1253
msgid "Fuzzy skin thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1255
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1263
msgid "Fuzzy skin point distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1265
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1273
msgid "Fill gaps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1275
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1282
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1290
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1291
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1298
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1299
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1326
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1331
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1332
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1339
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1340
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1348
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1356
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1358
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1361
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1367
msgid "Length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1369
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1384
msgid "0 (no open anchors)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1389 src/libslic3r/PrintConfig.cpp:1411
msgid "1000 (unlimited)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1394
msgid "Maximum length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1396
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1406
msgid "0 (not anchored)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1416
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1418
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1426
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1436
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1437
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1442
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1444
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1451
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1453
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1464
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1472
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1473
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1486
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1487
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1495
msgid "Maximum width of a segmented region"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1496
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:2093
#: src/libslic3r/PrintConfig.cpp:2102
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1504
msgid "Enable ironing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1505
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1511 src/libslic3r/PrintConfig.cpp:1513
msgid "Ironing Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1518
msgid "All top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1519
msgid "Topmost surface only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1520
msgid "All solid surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1525
msgid "Flow rate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1527
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1535
msgid "Spacing between ironing passes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1537
msgid "Distance between ironing lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1554
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1565
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1566
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1574
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1575
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1580
msgid "How to apply limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1581
msgid "Purpose of Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1583
msgid "How to apply the Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1588
msgid "Emit to G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1589
msgid "Use for time estimate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1590
msgid "Ignore"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1613
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1614
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1615
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1616
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1619
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1620
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1621
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1622
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1630
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1631
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1632
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1633
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1636
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1637
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1638
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1647
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1648
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1649
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1650
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1653
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1654
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1655
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1656
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1666
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1668
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1676
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1678
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1686
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1688
msgid ""
"Maximum acceleration when extruding (M204 P)\n"
"\n"
"Marlin (legacy) firmware flavor will use this also as travel acceleration "
"(M204 T)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1699
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1701
msgid "Maximum acceleration when retracting (M204 R)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1709
msgid "Maximum acceleration for travel moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1711
msgid "Maximum acceleration for travel moves (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1718 src/libslic3r/PrintConfig.cpp:1727
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1719
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1728
#, possible-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1738
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1739
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1749
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1758
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1759 src/libslic3r/PrintConfig.cpp:1770
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1763 src/libslic3r/PrintConfig.cpp:1774
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1769
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:1790
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1782
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1791
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1799
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1800
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1807
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1808
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1817
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1818
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1828
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1833
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1834
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1854
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1855
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1862
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1869
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1870
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1879
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1881
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1887
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1888
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1896
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1897
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1905 src/libslic3r/PrintConfig.cpp:1922
#: src/libslic3r/PrintConfig.cpp:1935 src/libslic3r/PrintConfig.cpp:1945
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1906
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1913
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1915
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1924
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1937
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1947
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1951
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1959
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1971
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1972
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1977
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1978
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1986
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1987
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1992
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1993
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2010
msgid "Raft contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2012
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2019
msgid "Raft expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2021
msgid "Expansion of the raft in XY plane for better stability."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2028
msgid "First layer density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2030
msgid "Density of the first raft or support layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2038
msgid "First layer expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2040
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2047
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2049
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2057
msgid "Resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2058
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2068
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2069
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2075
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2076
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2083
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2084
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2089 src/libslic3r/PrintConfig.cpp:2097
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2090
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2091
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2098
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2099
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2107
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2108
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2115
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2116
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2117
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2124
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2125
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2126
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2134 src/libslic3r/PrintConfig.cpp:2142
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2135
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2143
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2150 src/libslic3r/PrintConfig.cpp:2151
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2152
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2158 src/libslic3r/PrintConfig.cpp:2159
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2160
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2167
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2169
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2175
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2176
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2177
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2185
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2187
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2188
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2195
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2197
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2198
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2205
msgid "Distance from brim/object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2206
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2212
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2213
msgid "Height of skirt expressed in layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2219
msgid "Draft shield"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2220
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2228
msgid "Disabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2229
msgid "Limited"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2230
msgid "Enabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2235
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2236
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2237
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2246
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2255
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2257
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2267
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2269
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2270
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2276
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2278
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2284
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2286
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2298
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2309
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2321
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2327 src/libslic3r/PrintConfig.cpp:2328
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2334
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2335
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2343
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2344
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2354
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2369
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2385
msgid "Color change G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2386
msgid "This G-code will be used as a code for the color change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2395
msgid "This G-code will be used as a code for the pause print"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2404
msgid "This G-code will be used as a custom code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2412
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2413
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2418
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2419
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2424
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2425
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2432
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2434
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2442
msgid "Slicing Mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2444
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2449
msgid "Regular"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2450
msgid "Even-odd"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2451
msgid "Close holes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2456
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2458
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2462
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2464
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2470
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2472
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2482
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2484
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2494 src/libslic3r/PrintConfig.cpp:3404
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2500
msgid "Top contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2502
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2510
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2511
msgid "0.1 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2512
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2518
msgid "Bottom contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2520
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2527 src/libslic3r/PrintConfig.cpp:2610
msgid "same as top"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2528
msgid "0.1"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2529
msgid "0.2"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2534
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2536
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2541
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2547
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2549
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2558
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2567
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2569
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2574
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2576
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2584
msgid "Top interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2586
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2593
msgid "0 (off)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2594
msgid "1 (light)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2595
msgid "2 (default)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2596
msgid "3 (heavy)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2602
msgid "Bottom interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2604
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2616
msgid "Closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2618
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2626
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2628
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2637
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2646
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2648
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2654
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2660
msgid "Interface pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2662
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2676
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2678
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2687
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2694
msgid "Style"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2696
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2703
msgid "Snug"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2708
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2710
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2716
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2718
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2730
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2732
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2739
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2742
msgid "Nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2748
msgid "Thick bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2750
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2756
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2758
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2764
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2765
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2777
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2790
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2802
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2817
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2818
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2826
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2829
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2836
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2844
msgid "Z travel"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2845
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2853
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2854
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2860
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2861
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2867
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2868
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2878
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2879
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2885
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2886
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2893
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2899
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2900
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2906
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2907
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2916
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2917
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2923
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2924
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2931
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2937
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2938
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2944 src/libslic3r/PrintConfig.cpp:2945
msgid "Wipe tower brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2953
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2954
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2961
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2962
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2968
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2969
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2975
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2977
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2985
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2986
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3053
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3054
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3059
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3060
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3065
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3067
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3073
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3078
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3079
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3080
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3085
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3086
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3087
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3092
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3093
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3099
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3100
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3105
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3106
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3107
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3114
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3115
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3116
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3123
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3124
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3131 src/libslic3r/PrintConfig.cpp:3132
#: src/libslic3r/PrintConfig.cpp:3133
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3139 src/libslic3r/PrintConfig.cpp:3140
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3141
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3147
msgid "Elephant foot minimum width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3149
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3156 src/libslic3r/PrintConfig.cpp:3157
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3158
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3177 src/libslic3r/PrintConfig.cpp:3178
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3189 src/libslic3r/PrintConfig.cpp:3190
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3196 src/libslic3r/PrintConfig.cpp:3197
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3198
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3203 src/libslic3r/PrintConfig.cpp:3204
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3205
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3212
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3219
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3224
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3225
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3232 src/libslic3r/PrintConfig.cpp:3233
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3240 src/libslic3r/PrintConfig.cpp:3241
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3248 src/libslic3r/PrintConfig.cpp:3249
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3255 src/libslic3r/PrintConfig.cpp:3256
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3263 src/libslic3r/PrintConfig.cpp:3264
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3271 src/libslic3r/PrintConfig.cpp:3272
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3278 src/libslic3r/PrintConfig.cpp:3279
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3285
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3286
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3298 src/libslic3r/PrintConfig.cpp:3309
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3320
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3322
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3327
msgid "Pinhead front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3329
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3336
msgid "Head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3338
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3345
msgid "Pinhead width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3347
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3355
msgid "Pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3357
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3365
msgid "Small pillar diameter percent"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3367
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3376
msgid "Max bridges on a pillar"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3378
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3386
msgid "Pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3387
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3395
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3396
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3397
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3409
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3411
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3420
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3422
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3430
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3432
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3439
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3442
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3452
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3454
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3462
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3464
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3471
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3473
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3483
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3494
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3500
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3502
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3508
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3510
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3515
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3517
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3525
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3526
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3539
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3540
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3550
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3552
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3572
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3574
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3585
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3590
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3592
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3597
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3599
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3608
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3610
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3617
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3619
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3626
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3629
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3636
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3638
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3643
msgid "Wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3645
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3653
msgid "Accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3655
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3665
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4093
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4094
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4105
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4106
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4111
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4112
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4116
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4117
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4121
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4122
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4127
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4132
msgid "G-code viewer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4133
msgid "Visualize an already sliced and saved G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4138
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4139
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4144
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4145
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4150
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4151
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4155
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4156
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4160
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4161
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4165
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4166
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4176
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4177
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4182
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4203
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4204
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4208
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4209
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4212
msgid "Ensure on bed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4213
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4217
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4218
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4222
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4223
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4227
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4232
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4236
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4240
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4241
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4245
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4246
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4251
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4256
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4259
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4260
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4269
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4270
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4273
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4274
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4281
msgid "Bail out on unknown configuration values"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4282
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4283
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4287
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4288
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4291
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4292
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4296
msgid "Single instance mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4297
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4308
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4309
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4312
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4313
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4319
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4320
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/PrintObject.cpp:124
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:227
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:389
msgid "Generating support material"
msgstr ""

#: resources/data/hints.ini: [hint:Fuzzy skin]
msgid "Fuzzy skin\nDid you know that you can create rough fibre-like texture on the sides of your models using the<a>Fuzzy skin</a>feature? You can also use modifiers to apply fuzzy-skin only to a portion of your model."
msgstr ""

#: resources/data/hints.ini: [hint:Shapes gallery]
msgid "Shapes gallery\nDid you know that PrusaSlicer has a Shapes Gallery? You can use the included models as modifiers, negative volumes or as printable objects. Right-click the platter and select<a>Add Shape - Gallery</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Arrange settings]
msgid "Arrange settings\nDid you know that you can right-click the<a>Arrange icon</a>to adjust the size of the gap between objects and to allow automatic rotations?"
msgstr ""

#: resources/data/hints.ini: [hint:Negative volume]
msgid "Negative volume\nDid you know that you can subtract one mesh from another using the Negative volume modifier? That way you can, for example, create easily resizable holes directly in PrusaSlicer. Read more in the documentation. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Simplify mesh]
msgid "Simplify mesh\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Reload from disk]
msgid "Reload from disk\nDid you know that if you created a newer version of your model, you can simply reload it in PrusaSlicer? Right-click the model in the 3D view and choose Reload from disk. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Hiding sidebar]
msgid "Hiding sidebar\nDid you know that you can hide the right sidebar using the shortcut <b>Shift+Tab</b>? You can also enable the icon for this from the<a>Preferences</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Perspective camera]
msgid "Perspective camera\nDid you know that you can use the <b>K</b> key to quickly switch between an orthographic and perspective camera?"
msgstr ""

#: resources/data/hints.ini: [hint:Camera Views]
msgid "Camera Views\nDid you know that you can use the number keys <b>0-6</b> to quickly switch between predefined camera angles?"
msgstr ""

#: resources/data/hints.ini: [hint:Place on face]
msgid "Place on face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the<a>Place on face</a>function or press the <b>F</b> key."
msgstr ""

#: resources/data/hints.ini: [hint:Set number of instances]
msgid "Set number of instances\nDid you know that you can right-click a model and set an exact number of instances instead of copy-pasting it several times?"
msgstr ""

#: resources/data/hints.ini: [hint:Combine infill]
msgid "Combine infill\nDid you know that you can print the infill with a higher layer height compared to perimeters to save print time using the setting<a>Combine infill every</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Variable layer height]
msgid "Variable layer height\nDid you know that you can print different regions of your model with a different layer height and smooth the transitions between them? Try the<a>Variable layer height tool.</a>(Not available for SLA printers.)"
msgstr ""

#: resources/data/hints.ini: [hint:Undo/redo history]
msgid "Undo/redo history\nDid you know that you can right-click the<a>undo/redo arrows</a>to see the history of changes and to undo or redo several actions at once?"
msgstr ""

#: resources/data/hints.ini: [hint:Different layer height for each model]
msgid "Different layer height for each model\nDid you know that you can print each model on the plater with a different layer height? Right-click the model in the 3D view, choose Layers and Perimeters and adjust the values in the right panel. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Solid infill threshold area]
msgid "Solid infill threshold area\nDid you know that you can make parts of your model with a small cross-section be filled with solid infill automatically? Set the<a>Solid infill threshold area</a>.(Expert mode only.)"
msgstr ""

#: resources/data/hints.ini: [hint:Search functionality]
msgid "Search functionality\nDid you know that you use the<a>Search</a>tool to quickly find a specific PrusaSlicer setting? Or use the familiar shortcut <b>Ctrl+F</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Box selection]
msgid "Box selection\nDid you know that you can do a box selection with Shift+Mouse drag? You can also box-deselect objects with <b>Alt+Mouse drag</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Zoom on selected objects or on all objects if none selected]
msgid "Zoom on selected objects or on all objects if none selected\nDid you know that you can zoom in on selected objects by pressing the <b>Z</b> key? If none are selected, the camera will zoom on all objects in the scene."
msgstr ""

#: resources/data/hints.ini: [hint:Printable toggle]
msgid "Printable toggle\nDid you know that you can disable the G-code generation for the selected model without having to move or delete it? Toggle the Printable property of a model from the Right-click context menu."
msgstr ""

#: resources/data/hints.ini: [hint:Mirror]
msgid "Mirror\nDid you know that you can mirror the selected model to create a reversed version of it? Right-click the model, select Mirror and pick the mirror axis."
msgstr ""

#: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45 degrees]
msgid "PageUp / PageDown quick rotation by 45 degrees\nDid you know that you can quickly rotate selected models by 45 degrees around the Z-axis clockwise or counter-clockwise by pressing <b>Page Up</b> or <b>Page Down</b> respectively?"
msgstr ""

#: resources/data/hints.ini: [hint:Load config from G-code]
msgid "Load config from G-code\nDid you know that you can use File-Import-Import Config to load print, filament and printer profiles from an existing G-code file? Similarly, you can use File-Import-Import SL1 / SL1S archive, which also lets you reconstruct 3D models from the voxel data."
msgstr ""

#: resources/data/hints.ini: [hint:Ironing]
msgid "Ironing\nDid you know that you can smooth top surfaces of prints using Ironing? The nozzle will run a special second infill phase at the same layer to fill in holes and flatten any lifted plastic. Read more in the documentation. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on supports]
msgid "Paint-on supports\nDid you know that you can paint directly on the object and select areas, where supports should be enforced or blocked? Try the<a>Paint-on supports</a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on seam]
msgid "Paint-on seam\nDid you know that you can paint directly on the object and select where to place the start/endpoint of each perimeter loop? Try the<a>Seam painting</a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Insert Pause]
msgid "Insert Pause\nDid you know that you can schedule the print to pause at a specific layer? Right-click the layer slider in the Preview and select Add pause print (M601). This can be used to insert magnets, weights or nuts into your prints. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Insert Custom G-code]
msgid "Insert Custom G-code\nDid you know that you can insert a custom G-code at a specific layer? Right-click the layer in the Preview and select Add custom G-code. With this function you can, for example, create a temperature tower. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Configuration snapshots]
msgid "Configuration snapshots\nDid you know that roll back to a complete backup of all system and user profiles? You can view and move back and forth between snapshots using the Configuration - <a>Configuration snapshots menu</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Minimum wall thickness]
msgid "Minimum wall thickness\nDid you know that instead of the number of top and bottom layers, you can define the<a>Minimum shell thickness</a>in millimeters? This feature is especially useful when using the variable layer height function."
msgstr ""

#: resources/data/hints.ini: [hint:Settings in non-modal window]
msgid "Settings in non-modal window\nDid you know that you can open the Settings in a new non-modal window? This means you can have settings open on one screen and the G-code Preview on the other. Go to the<a>Preferences</a>and select Settings in non-modal window."
msgstr ""

#: resources/data/hints.ini: [hint:Adaptive infills]
msgid "Adaptive infills\nDid you know that you can use the Adaptive cubic and Support cubic infills to decrease the print time and lower the filament consumption? Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Fullscreen mode]
msgid "Fullscreen mode\nDid you know that you can switch PrusaSlicer to fullscreen mode? Use the <b>F11</b> hotkey."
msgstr ""