# Print profiles for the TriLAB printers # based on https://github.com/trilab3d/PrusaSlicer-settings/tree/master/live/TriLAB [vendor] # Vendor name will be shown by the Config Wizard. name = TriLAB # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 0.0.9 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/ # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. [printer_model:AQI] name = AzteQ Industrial variants = 0.4; 0.6 technology = FFF family = AzteQ bed_model = aq_bed.stl bed_texture = aq_bed_texture.svg default_materials = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum);AzteQ Industrial (Door Opened) - PLA - Generic;AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum);AzteQ Industrial - ABS - ExtraFill (Fillamentum);AzteQ Industrial - ABS - Generic;AzteQ Industrial - ASA - ExtraFill (Fillamentum);AzteQ Industrial - ASA - Generic;AzteQ Industrial - ASA - Prusament (Prusa);AzteQ Industrial - PA - Nylon PA12 (Fiberlogy);AzteQ Industrial - PC Blend - Prusament (Prusa);AzteQ Industrial - PC - PolyMax (Polymaker);AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle;AzteQ Industrial - PC/ABS - (Fillamentum);AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle;AzteQ Industrial - PA - Nylon FX256 (Fillamentum);AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle [printer_model:DQ2] name = DeltiQ 2 variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle;DeltiQ - PA - Nylon PA12 (Fiberlogy);DeltiQ - PA - Nylon CF15 Carbon (Fillamentum);DeltiQ - MoldLay (Wax-Alike) [printer_model:DQ2P] name = DeltiQ 2 Plus variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle;DeltiQ - PA - Nylon PA12 (Fiberlogy);DeltiQ - PA - Nylon CF15 Carbon (Fillamentum);DeltiQ - MoldLay (Wax-Alike) [printer_model:DQ2+FP2] name = DeltiQ 2 + FlexPrint 2 variants = 0.4 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL);DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum) [printer_model:DQ2P+FP2] name = DeltiQ 2 Plus + FlexPrint 2 variants = 0.4 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL);DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum) [printer_model:DQ2+FP] name = DeltiQ 2 + FlexPrint variants = 0.4 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic [printer_model:DQ2P+FP] name = DeltiQ 2 Plus + FlexPrint variants = 0.4 technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic [printer_model:DQM] name = DeltiQ M variants = 0.4 technology = FFF family = DeltiQ default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE [printer_model:DQL] name = DeltiQ L variants = 0.4 technology = FFF family = DeltiQ default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE [printer_model:DQXL] name = DeltiQ XL variants = 0.4 technology = FFF family = DeltiQ default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE # DeltiQ print styles # [print:DeltiQ 0.20mm Normal] avoid_crossing_perimeters = 0 bottom_fill_pattern = monotonic bottom_solid_layers = 4 bottom_solid_min_thickness = 0.7 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.95 bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 2000 dont_support_bridges = 0 draft_shield = 0 elefant_foot_compensation = 0.0 ensure_vertical_shell_thickness = 0 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 30 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 60 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 2000 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 60 interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 60 max_volumetric_speed = 0 min_skirt_length = 4 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode overhangs = 1 perimeter_acceleration = 1500 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 0 skirt_distance = 3 skirt_height = 2 skirts = 1 slice_closing_radius = 0.049 small_perimeter_speed = 20 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 30 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance = 0.1 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 4 support_material_interface_spacing = 0.4 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 40 support_material_with_sheath = 0 support_material_xy_spacing = 0.6 thin_walls = 0 threads = 12 top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 top_solid_layers = 5 top_solid_min_thickness = 0.7 travel_speed = 150 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:DeltiQ 0.10mm Detail] inherits = DeltiQ 0.20mm Normal bottom_solid_layers = 7 bottom_solid_min_thickness = 0.7 bridge_flow_ratio = 0.7 bridge_speed = 30 ensure_vertical_shell_thickness = 1 layer_height = 0.1 first_layer_height = 0.2 top_solid_layers = 9 top_solid_min_thickness = 0.7 top_infill_extrusion_width = 0.4 fill_pattern = grid fill_density = 20% [print:DeltiQ 0.15mm Normal] inherits = DeltiQ 0.20mm Normal bottom_solid_layers = 5 bottom_solid_min_thickness = 0.7 bridge_flow_ratio = 0.7 bridge_speed = 30 ensure_vertical_shell_thickness = 1 layer_height = 0.15 first_layer_height = 0.2 top_solid_layers = 7 top_solid_min_thickness = 0.7 fill_pattern = grid fill_density = 20% [print:DeltiQ 0.20mm Vase] inherits = DeltiQ 0.20mm Normal perimeters = 1 top_solid_layers = 0 fill_density = 0 support_material = 0 spiral_vase = 1 ensure_vertical_shell_thickness = 1 thin_walls = 0 [print:DeltiQ 0.20mm FLEX] inherits = DeltiQ 0.20mm Normal avoid_crossing_perimeters = 0 bridge_flow_ratio = 0.80 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4 extra_perimeters = 1 only_retract_when_crossing_perimeters = 1 extrusion_width = 0.40 overhangs = 0 seam_position = nearest thin_walls = 0 bridge_speed = 20 external_perimeter_speed = 20 first_layer_speed = 20 gap_fill_speed = 25 infill_extrusion_width = 0.55 infill_speed = 40 infill_overlap = 27% perimeter_speed = 25 small_perimeter_speed = 20 solid_infill_speed = 30 solid_infill_extrusion_width = 0.45 support_material_contact_distance = 0.3 support_material_speed = 30 top_solid_infill_speed = 20 top_fill_pattern = rectilinear fill_pattern = grid fill_density = 25% travel_speed = 200 max_print_speed = 40 complete_objects = 1 [print:DeltiQ 0.07mm Quality @0.25 nozzle] inherits = DeltiQ 0.20mm Normal bottom_solid_layers = 6 bottom_solid_min_thickness = 0.5 bridge_speed = 60 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.25 elefant_foot_compensation = 0.0 external_perimeter_extrusion_width = 0.27 extrusion_width = 0.25 first_layer_extrusion_width = 0.26 first_layer_height = 0.1 infill_extrusion_width = 0.27 infill_overlap = 50% layer_height = 0.07 overhangs = 1 perimeter_extrusion_width = 0.27 perimeters = 5 solid_infill_extrusion_width = 0.27 skirts = 2 support_material_extrusion_width = 0.27 support_material_contact_distance = 0.1 top_infill_extrusion_width = 0.27 top_solid_layers = 6 top_solid_min_thickness = 0.5 thin_walls = 1 [print:DeltiQ 0.20mm Normal @0.25 nozzle] inherits = DeltiQ 0.07mm Quality @0.25 nozzle first_layer_height = 0.2 layer_height = 0.2 [print:DeltiQ 0.30mm Normal @0.6 nozzle] inherits = DeltiQ 0.20mm Normal compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.6 external_perimeter_extrusion_width = 0.68 extrusion_width = 0.65 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 infill_extrusion_width = 0.68 layer_height = 0.3 perimeter_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 support_material_contact_distance = 0.2 support_material_extrusion_width = 0.55 support_material_interface_spacing = 0.6 support_material_xy_spacing = 0.9 top_infill_extrusion_width = 0.6 [print:DeltiQ 0.30mm Strong @0.6 nozzle] inherits = DeltiQ 0.30mm Normal @0.6 nozzle fill_density = 50% perimeters = 3 [print:DeltiQ 0.35mm Fast @0.6 nozzle] inherits = DeltiQ 0.30mm Normal @0.6 nozzle fill_density = 10% layer_height = 0.35 [print:DeltiQ 0.40mm Normal @0.8 nozzle] inherits = DeltiQ 0.20mm Normal bottom_solid_layers = 3 bottom_solid_min_thickness = 1.2 bridge_flow_ratio = 0.90 bridge_speed = 20 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.8 elefant_foot_compensation = 0.0 external_perimeter_extrusion_width = 0.80 external_perimeter_speed = 30 extrusion_width = 0.80 first_layer_extrusion_width = 0.80 first_layer_height = 0.4 first_layer_speed = 20 gap_fill_speed = 40 infill_extrusion_width = 0.9 infill_overlap = 28% infill_speed = 60 layer_height = 0.4 max_print_speed = 80 max_volumetric_speed = 40 overhangs = 1 perimeter_extrusion_width = 0.80 perimeter_speed = 45 perimeters = 2 small_perimeter_speed = 20 solid_infill_extrusion_width = 0.8 solid_infill_speed = 60 support_material_extrusion_width = 0.8 support_material_contact_distance = 0.2 top_infill_extrusion_width = 0.8 top_solid_infill_speed = 40 top_solid_layers = 4 top_solid_min_thickness = 1.2 [print:DeltiQ 0.40mm Vase @0.8 nozzle] inherits = DeltiQ 0.40mm Normal @0.8 nozzle bottom_solid_layers = 4 perimeters = 1 top_solid_layers = 0 fill_density = 0 support_material = 0 spiral_vase = 1 ensure_vertical_shell_thickness = 1 thin_walls = 0 # AzteQ print styles # [print:AzteQ Industrial 0.20mm Normal] avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic bottom_solid_layers = 4 bottom_solid_min_thickness = 0.7 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.95 bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 2000 dont_support_bridges = 0 draft_shield = 0 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 0 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 30 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 65 extruder_clearance_radius = 65 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 2000 infill_anchor = 600% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 60 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 60 max_volumetric_speed = 0 min_skirt_length = 4 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode overhangs = 1 perimeter_acceleration = 1500 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 0 skirt_distance = 10 skirt_height = 2 skirts = 1 slice_closing_radius = 0.049 small_perimeter_speed = 20 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 30 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance = 0.1 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 4 support_material_interface_spacing = 0.4 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 40 support_material_with_sheath = 0 support_material_xy_spacing = 0.6 thin_walls = 0 threads = 12 top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 top_solid_layers = 5 top_solid_min_thickness = 0.7 travel_speed = 200 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:AzteQ Industrial 0.15mm Detail] inherits = AzteQ Industrial 0.20mm Normal layer_height = 0.15 [print:AzteQ Industrial 0.20mm Strong] inherits = AzteQ Industrial 0.20mm Normal fill_density = 50% perimeters = 3 [print:AzteQ Industrial 0.20mm Vase] inherits = AzteQ Industrial 0.20mm Normal ensure_vertical_shell_thickness = 1 fill_density = 0% perimeters = 1 spiral_vase = 1 top_solid_layers = 0 [print:AzteQ Industrial 0.25mm Fast] inherits = AzteQ Industrial 0.20mm Normal fill_density = 10% layer_height = 0.25 [print:AzteQ Industrial 0.30mm Normal @0.6 nozzle] inherits = AzteQ Industrial 0.20mm Normal compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 external_perimeter_extrusion_width = 0.68 extrusion_width = 0.65 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 infill_extrusion_width = 0.68 layer_height = 0.3 perimeter_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 support_material_contact_distance = 0.2 support_material_extrusion_width = 0.55 support_material_interface_spacing = 0.6 support_material_xy_spacing = 0.9 top_infill_extrusion_width = 0.6 [print:AzteQ Industrial 0.30mm Strong @0.6 nozzle] inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle fill_density = 50% perimeters = 3 [print:AzteQ Industrial 0.35mm Fast @0.6 nozzle] inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle fill_density = 10% layer_height = 0.35 # DeltiQ filaments # [filament:*DeltiQ common*] compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.4 disable_fan_first_layers = 3 extrusion_multiplier = 1 filament_colour = #FF0000 filament_diameter = 1.75 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_settings_id = "" filament_soluble = 0 filament_toolchange_delay = 0 start_filament_gcode = "; FILAMENT_START_GCODE" end_filament_gcode = "; FILAMENT_END_GCODE" filament_vendor = Generic # DeltiQ PLA filaments # [filament:DeltiQ - PLA - Generic] inherits = *DeltiQ common* bed_temperature = 55 bridge_fan_speed = 100 cooling = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_cost = 750 filament_density = 1.24 filament_max_volumetric_speed = 8 filament_retract_before_travel = 2 filament_retract_before_wipe = 90% filament_retract_layer_change = 1 filament_retract_length = 4.0 filament_retract_lift = 0.2 filament_retract_speed = 30 filament_type = PLA filament_wipe = 1 first_layer_bed_temperature = 55 first_layer_temperature = 220 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 4 temperature = 215 [filament:DeltiQ - PLA - ExtraFill (Fillamentum)] inherits = DeltiQ - PLA - Generic filament_cost = 750 filament_density = 1.24 filament_vendor = Fillamentum [filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle] inherits = DeltiQ - PLA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 [filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle] inherits = DeltiQ - PLA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle] inherits = DeltiQ - PLA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 disable_fan_first_layers = 1 filament_max_volumetric_speed = 40 first_layer_temperature = 230 slowdown_below_layer_time = 8 temperature = 230 filament_retract_layer_change = 0 filament_retract_length = 4.1 filament_retract_speed = 45 filament_deretract_speed = 25 [filament:DeltiQ FP - PLA - Generic] inherits = DeltiQ - PLA - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.7 filament_retract_speed = 28 [filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)] inherits = DeltiQ FP - PLA - Generic [filament:DeltiQ FP2 - PLA - Generic] inherits = DeltiQ FP - PLA - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 1.2 filament_retract_speed = 28 [filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)] inherits = DeltiQ FP2 - PLA - Generic # DeltiQ PETG filaments # [filament:DeltiQ - PETG - Generic] inherits = *DeltiQ common* bed_temperature = 80 bridge_fan_speed = 50 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 480 filament_density = 1.27 filament_deretract_speed = 25 filament_max_volumetric_speed = 8 filament_retract_before_travel = 2 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.2 filament_retract_speed = 45 filament_type = PET filament_wipe = 1 first_layer_bed_temperature = 80 first_layer_temperature = 240 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 10 slowdown_below_layer_time = 5 temperature = 245 [filament:DeltiQ - PETG (Devil Design)] inherits = DeltiQ - PETG - Generic filament_cost = 480 filament_density = 1.27 filament_vendor = DevilDesign [filament:DeltiQ - PETG (Devil Design) @0.25 nozzle] inherits = DeltiQ - PETG (Devil Design) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 first_layer_temperature = 225 temperature = 220 max_fan_speed = 65 min_fan_speed = 40 bridge_fan_speed = 100 [filament:DeltiQ - PETG (Devil Design) @0.6 nozzle] inherits = DeltiQ - PETG (Devil Design) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:DeltiQ - PETG (Devil Design) @0.8 nozzle] inherits = DeltiQ - PETG (Devil Design) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 filament_max_volumetric_speed = 40 first_layer_temperature = 240 slowdown_below_layer_time = 8 temperature = 240 filament_retract_layer_change = 0 filament_retract_length = 4.3 filament_retract_speed = 45 filament_deretract_speed = 25 filament_retract_before_wipe = 80% filament_wipe = 1 [filament:DeltiQ FP - PETG - Generic] inherits = DeltiQ - PETG - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.7 filament_retract_speed = 25 [filament:DeltiQ FP - PETG (Devil Design)] inherits = DeltiQ FP - PETG - Generic [filament:DeltiQ FP2 - PETG - Generic] inherits = DeltiQ FP - PETG - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 1.4 filament_retract_speed = 35 filament_retract_before_wipe = 0% [filament:DeltiQ FP2 - PETG (Devil Design)] inherits = DeltiQ FP2 - PETG - Generic # DeltiQ ABS filaments # [filament:DeltiQ - ABS - Generic] inherits = *DeltiQ common* bed_temperature = 100 bridge_fan_speed = 25 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 639 filament_density = 1.04 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.2 filament_retract_speed = 25 filament_type = ABS filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 15 min_fan_speed = 5 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 255 [filament:DeltiQ - ABS - ExtraFill (Fillamentum)] inherits = DeltiQ - ABS - Generic filament_cost = 639 filament_density = 1.04 filament_vendor = Fillamentum [filament:DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle] inherits = DeltiQ - ABS - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:DeltiQ FP - ABS - Generic] inherits = DeltiQ - ABS - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.7 filament_retract_speed = 25 [filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)] inherits = DeltiQ FP - ABS - Generic [filament:DeltiQ FP2 - ABS - Generic] inherits = DeltiQ FP - ABS - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.8 filament_retract_speed = 25 [filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)] inherits = DeltiQ FP2 - ABS - Generic # DeltiQ ASA filaments # [filament:DeltiQ - ASA - ExtraFill (Fillamentum)] inherits = DeltiQ - ABS - Generic filament_cost = 739 filament_density = 1.07 filament_type = ASA filament_vendor = Fillamentum first_layer_temperature = 265 temperature = 265 [filament:DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle] inherits = DeltiQ - ASA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)] inherits = DeltiQ - ASA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.7 filament_retract_speed = 25 [filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)] inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 [filament:DeltiQ - ASA - ASA 275 (Spectrum)] inherits = *DeltiQ common* bed_temperature = 55 bridge_fan_speed = 80 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Spectrum filament_cost = 587 filament_density = 1.07 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.3 filament_retract_speed = 25 filament_type = ASA filament_wipe = 1 first_layer_bed_temperature = 55 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 230 [filament:DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle] inherits = DeltiQ - ASA - ASA 275 (Spectrum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 # DeltiQ CPE filaments # [filament:DeltiQ - CPE - HG100 (Fillamentum)] inherits = *DeltiQ common* bed_temperature = 90 bridge_fan_speed = 50 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum filament_cost = 1003 filament_density = 1.25 filament_deretract_speed = 25 filament_max_volumetric_speed = 8 filament_retract_before_travel = 2 filament_retract_before_wipe = 70% filament_retract_layer_change = 0 filament_retract_length = 4.3 filament_retract_lift = 0.2 filament_retract_speed = 45 filament_type = CPE filament_wipe = 1 first_layer_bed_temperature = 90 first_layer_temperature = 265 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 10 slowdown_below_layer_time = 5 temperature = 260 [filament:DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle] inherits = DeltiQ - CPE - HG100 (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:DeltiQ FP - CPE - HG100 (Fillamentum)] inherits = DeltiQ - CPE - HG100 (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.7 filament_retract_speed = 25 filament_deretract_speed = 0 filament_retract_before_wipe = 0% [filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)] inherits = DeltiQ FP - CPE - HG100 (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 filament_retract_length = 0.8 filament_retract_speed = 35 filament_deretract_speed = 0 filament_retract_before_wipe = 0% # DeltiQ FLEX filaments # [filament:DeltiQ FP - FLEX - Generic] inherits = *DeltiQ common* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1.07 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Generic filament_cost = 1870 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 filament_retract_before_travel = 2 filament_retract_before_wipe = 70% filament_retract_layer_change = 0 filament_retract_length = 2.5 filament_retract_lift = 0.2 filament_retract_restart_extra = nil filament_retract_speed = 20 filament_type = FLEX filament_wipe = 1 first_layer_bed_temperature = 50 first_layer_temperature = 240 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 slowdown_below_layer_time = 4 temperature = 240 [filament:DeltiQ FP2 - FLEX - Generic] inherits = DeltiQ FP - FLEX - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1.07 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum filament_cost = 1870 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 filament_retract_before_travel = 2 filament_retract_before_wipe = 70% filament_retract_layer_change = 0 filament_retract_length = 2.5 filament_retract_lift = 0.2 filament_retract_restart_extra = nil filament_retract_speed = 20 filament_type = FLEX filament_wipe = 1 first_layer_bed_temperature = 50 first_layer_temperature = 225 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 slowdown_below_layer_time = 4 temperature = 225 [filament:DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)] inherits = DeltiQ FP2 - FLEX - Generic bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1.10 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum filament_cost = 1870 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 filament_retract_before_travel = 2 filament_retract_before_wipe = 70% filament_retract_layer_change = 0 filament_retract_length = 2.5 filament_retract_lift = 0.2 filament_retract_restart_extra = nil filament_retract_speed = 20 filament_type = TPU92A filament_wipe = 1 first_layer_bed_temperature = 50 first_layer_temperature = 230 max_fan_speed = 70 min_fan_speed = 50 min_print_speed = 5 slowdown_below_layer_time = 4 temperature = 230 [filament:DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)] inherits = DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum) extrusion_multiplier = 1.10 filament_cost = 1870 filament_density = 1.23 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 filament_retract_before_wipe = 70% filament_retract_length = 2.5 filament_retract_speed = 20 filament_type = TPU98A [filament:DeltiQ FP2 - TPU 93A (SMARTFIL)] inherits = DeltiQ FP2 - FLEX - Generic bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1.00 fan_always_on = 1 fan_below_layer_time = 10 filament_vendor = Smartfil filament_cost = 1209 filament_density = 1.21 filament_deretract_speed = nil filament_max_volumetric_speed = 2.5 filament_retract_before_travel = 2 filament_retract_before_wipe = nil filament_retract_layer_change = 0 filament_retract_length = 2.9 filament_retract_lift = 0.2 filament_retract_restart_extra = nil filament_retract_speed = 35 filament_type = TPU93A filament_wipe = 0 first_layer_bed_temperature = 50 first_layer_temperature = 235 max_fan_speed = 70 min_fan_speed = 30 min_print_speed = 10 slowdown_below_layer_time = 4 temperature = 235 [filament:DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)] inherits = DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum) extrusion_multiplier = 1.1 filament_cost = 3578 filament_density = 1.00 filament_max_volumetric_speed = 2.9 filament_retract_length = 0.0 filament_type = PEBA90A bridge_fan_speed = 100 max_fan_speed = 50 min_fan_speed = 50 disable_fan_first_layers = 2 first_layer_bed_temperature = 75 first_layer_temperature = 245 bed_temperature = 75 temperature = 245 [filament:DeltiQ - PA - Nylon PA12 (Fiberlogy)] inherits = DeltiQ - ABS - Generic bed_temperature = 100 filament_cost = 1213 filament_density = 1.02 filament_retract_length = 4.1 filament_type = NYLON first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 20 temperature = 255 [filament:DeltiQ - PA - Nylon CF15 Carbon (Fillamentum)] inherits = DeltiQ - ABS - Generic bed_temperature = 100 filament_cost = 2287 filament_density = 1.08 filament_retract_length = 2.0 filament_type = NYLON first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 50 min_fan_speed = 20 temperature = 255 extrusion_multiplier = 0.95 [filament:DeltiQ - MoldLay (Wax-Alike)] inherits = DeltiQ - PLA - Generic bed_temperature = 50 filament_cost = 1951 filament_retract_length = 2.0 filament_type = PLA first_layer_bed_temperature = 50 first_layer_temperature = 175 max_fan_speed = 70 min_fan_speed = 70 temperature = 175 filament_vendor = Wax-Alike # AzteQ filaments # [filament:*AzteQ common*] inherits = *DeltiQ common* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4 # AzteQ Industrial filaments # [filament:AzteQ Industrial (Door Opened) - PLA - Generic] inherits = *AzteQ common* bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 750 filament_density = 1.24 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.2 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = PLA filament_vendor = Generic filament_wipe = 1 first_layer_bed_temperature = 50 first_layer_temperature = 215 full_fan_speed_layer = 0 max_fan_speed = 100 min_fan_speed = 90 min_print_speed = 10 slowdown_below_layer_time = 15 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature" temperature = 210 [filament:AzteQ Industrial (Door Opened) - PLA - Generic @0.6 nozzle] inherits = AzteQ Industrial (Door Opened) - PLA - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)] inherits = AzteQ Industrial (Door Opened) - PLA - Generic filament_vendor = Fillamentum filament_cost = 750 filament_density = 1.24 [filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum)] inherits = *AzteQ common* bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 750 filament_density = 1.24 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 6 filament_retract_lift = 0.2 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = PLA filament_vendor = Fillamentum filament_wipe = 1 first_layer_bed_temperature = 50 first_layer_temperature = 220 full_fan_speed_layer = 0 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature" temperature = 215 [filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - ABS - Generic] inherits = *AzteQ common* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 639 filament_density = 1.04 filament_deretract_speed = nil filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.2 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_type = ABS filament_vendor = Generic filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 255 full_fan_speed_layer = 0 max_fan_speed = 100 min_fan_speed = 80 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" temperature = 255 [filament:AzteQ Industrial - ABS - Generic @0.6 nozzle] inherits = AzteQ Industrial - ABS - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum)] inherits = AzteQ Industrial - ABS - Generic filament_vendor = Fillamentum filament_cost = 639 filament_density = 1.04 [filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial - ABS - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - PC/ABS - (Fillamentum)] inherits = AzteQ Industrial - ABS - Generic filament_vendor = Fillamentum filament_type = PCABS filament_cost = 1324 filament_density = 1.07 bed_temperature = 100 filament_retract_length = 4.0 first_layer_bed_temperature = 100 first_layer_temperature = 265 max_fan_speed = 50 min_fan_speed = 50 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" temperature = 265 filament_notes = "S180 ; Probing temperature" [filament:AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial - PC/ABS - (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - PC - PolyMax (Polymaker)] inherits = AzteQ Industrial - ABS - Generic filament_vendor = Polymaker filament_cost = 1290 filament_density = 1.21 bed_temperature = 100 filament_retract_length = 4.0 first_layer_bed_temperature = 100 first_layer_temperature = 265 max_fan_speed = 50 min_fan_speed = 50 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" temperature = 265 filament_notes = "S180 ; Probing temperature" [filament:AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle] inherits = AzteQ Industrial - PC - PolyMax (Polymaker) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - ASA - Generic] inherits = *AzteQ common* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 739 filament_density = 1.07 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.2 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_type = ASA filament_vendor = Generic filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 265 full_fan_speed_layer = 0 max_fan_speed = 75 min_fan_speed = 50 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" temperature = 265 [filament:AzteQ Industrial - ASA - Generic @0.6 nozzle] inherits = AzteQ Industrial - ASA - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum)] inherits = AzteQ Industrial - ASA - Generic filament_vendor = Fillamentum first_layer_temperature = 255 temperature = 255 max_fan_speed = 80 min_fan_speed = 60 [filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial - ASA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - ASA - Prusament (Prusa)] inherits = AzteQ Industrial - ASA - Generic filament_cost = 680 filament_density = 1.07 filament_spool_weight = 0 filament_vendor = Prusa first_layer_temperature = 260 max_fan_speed = 70 min_fan_speed = 70 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" temperature = 260 [filament:AzteQ Industrial - ASA - Prusament (Prusa) @0.6 nozzle] inherits = AzteQ Industrial - ASA - Prusament (Prusa) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)] inherits = *AzteQ common* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 1212 filament_density = 1.02 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.2 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = NYLON filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = Fiberlogy filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 255 full_fan_speed_layer = 0 max_fan_speed = 75 min_fan_speed = 50 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" temperature = 255 [filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) @0.6 nozzle] inherits = AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - PA - Nylon FX256 (Fillamentum)] inherits = *AzteQ common* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 1565 filament_density = 1.01 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 6.1 filament_retract_lift = 0.2 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = NYLON filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_vendor = Fillamentum filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 255 full_fan_speed_layer = 0 max_fan_speed = 85 min_fan_speed = 50 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S60 ; Set and wait - chamber temperature" temperature = 255 [filament:AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial - PA - Nylon FX256 (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - PC Blend - Prusament (Prusa)] inherits = *AzteQ common* bed_temperature = 100 bridge_fan_speed = 75 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_cost = 1156 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 filament_retract_before_wipe = 70% filament_retract_layer_change = 1 filament_retract_length = 4.1 filament_retract_lift = 0.2 filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_type = PC filament_vendor = Prusa filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 270 full_fan_speed_layer = 0 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" temperature = 270 filament_notes = "S180 ; Probing temperature" [filament:AzteQ Industrial - PC Blend - Prusament (Prusa) @0.6 nozzle] inherits = AzteQ Industrial - PC Blend - Prusament (Prusa) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 # DeltiQ Printer # [printer:*DeltiQ*] inherits = bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z] between_objects_gcode = cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_filament_profile = "DeltiQ PLA" default_print_profile = DeltiQ 0.20mm Normal deretract_speed = 0 end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning extra_loading_move = -2 extruder_colour = #FF0000 extruder_offset = 0x0 gcode_flavor = repetier layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n max_layer_height = 0.25 max_print_height = 300 min_layer_height = 0.15 nozzle_diameter = 0.4 parking_pos_retraction = 92 printer_model = printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL printer_settings_id = printer_variant = printer_vendor = TriLAB Group s.r.o. remaining_times = 0 retract_before_travel = 3 retract_before_wipe = 100% retract_layer_change = 1 retract_length = 4.0 retract_length_toolchange = 10 retract_lift = 0.2 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder thumbnails = toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 0 wipe = 1 z_offset = 0 [printer:DeltiQ L] inherits = *DeltiQ* printer_model = DQL printer_variant = 0.4 bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013 max_print_height = 300 [printer:DeltiQ M] inherits = *DeltiQ* printer_variant = 0.4 bed_shape = 89.507x9.40756,88.0333x18.7121,85.5951x27.8115,82.2191x36.6063,77.9423x45,72.8115x52.9007,66.883x60.2218,60.2218x66.883,52.9007x72.8115,45x77.9423,36.6063x82.2191,27.8115x85.5951,18.7121x88.0333,9.40756x89.507,2.54949e-014x90,-9.40756x89.507,-18.7121x88.0333,-27.8115x85.5951,-36.6063x82.2191,-45x77.9423,-52.9007x72.8115,-60.2218x66.883,-66.883x60.2218,-72.8115x52.9007,-77.9423x45,-82.2191x36.6063,-85.5951x27.8115,-88.0333x18.7121,-89.507x9.40756,-90x5.09899e-014,-89.507x-9.40756,-88.0333x-18.7121,-85.5951x-27.8115,-82.2191x-36.6063,-77.9423x-45,-72.8115x-52.9007,-66.883x-60.2218,-60.2218x-66.883,-52.9007x-72.8115,-45x-77.9423,-36.6063x-82.2191,-27.8115x-85.5951,-18.7121x-88.0333,-9.40756x-89.507,-1.65327e-014x-90,9.40756x-89.507,18.7121x-88.0333,27.8115x-85.5951,36.6063x-82.2191,45x-77.9423,52.9007x-72.8115,60.2218x-66.883,66.883x-60.2218,72.8115x-52.9007,77.9423x-45,82.2191x-36.6063,85.5951x-27.8115,88.0333x-18.7121,89.507x-9.40756,90x-1.0198e-013 max_print_height = 230 printer_model = DQM retract_length = 3.7 retract_length_toolchange = 10 retract_speed = 30 start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-45 Y-77 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set Extruder Temperature and Wait\nG3 X45 Y-77 I45 J77 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder [printer:DeltiQ XL] inherits = *DeltiQ* printer_model = DQXL printer_variant = 0.4 bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013 max_print_height = 500 retract_length = 4.5 retract_speed = 35 [printer:*DeltiQ 2*] inherits = *DeltiQ* before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors gcode_flavor = reprapfirmware layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z] pause_print_gcode = M0 start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2 [printer:DeltiQ 2] inherits = *DeltiQ 2* printer_model = DQ2 printer_variant = 0.4 max_print_height = 300 [printer:DeltiQ 2 - 0.25 nozzle] inherits = DeltiQ 2 printer_variant = 0.25 max_layer_height = 0.15 min_layer_height = 0.07 nozzle_diameter = 0.25 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle" default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle [printer:DeltiQ 2 - 0.6 nozzle] inherits = DeltiQ 2 printer_variant = 0.6 max_layer_height = 0.4 min_layer_height = 0.2 nozzle_diameter = 0.6 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle" default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle [printer:DeltiQ 2 - 0.8 nozzle] inherits = DeltiQ 2 printer_variant = 0.8 max_layer_height = 0.6 min_layer_height = 0.3 nozzle_diameter = 0.8 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle [printer:DeltiQ 2 Plus] inherits = *DeltiQ 2* printer_model = DQ2P printer_variant = 0.4 max_print_height = 500 [printer:DeltiQ 2 Plus - 0.25 nozzle] inherits = DeltiQ 2 Plus printer_variant = 0.25 max_layer_height = 0.15 min_layer_height = 0.07 nozzle_diameter = 0.25 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle" default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle [printer:DeltiQ 2 Plus - 0.6 nozzle] inherits = DeltiQ 2 Plus printer_variant = 0.6 max_layer_height = 0.4 min_layer_height = 0.2 nozzle_diameter = 0.6 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle" default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle [printer:DeltiQ 2 Plus - 0.8 nozzle] inherits = DeltiQ 2 Plus printer_variant = 0.8 max_layer_height = 0.6 min_layer_height = 0.3 nozzle_diameter = 0.8 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle [printer:*DeltiQ 2 FlexPrint*] inherits = *DeltiQ 2* start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder default_print_profile = DeltiQ 0.20mm FLEX default_filament_profile = "DeltiQ FP2 - FLEX - Generic" retract_length = 0.7 retract_speed = 25 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1 [printer:DeltiQ 2 + FlexPrint] inherits = *DeltiQ 2 FlexPrint* printer_model = DQ2+FP printer_variant = 0.4 max_print_height = 300 [printer:DeltiQ 2 Plus + FlexPrint] inherits = *DeltiQ 2 FlexPrint* printer_model = DQ2P+FP printer_variant = 0.4 max_print_height = 500 [printer:*DeltiQ 2 FlexPrint 2*] inherits = *DeltiQ 2 FlexPrint* default_filament_profile = "DeltiQ FP2 - FLEX - Generic" retract_length = 0.8 retract_speed = 25 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2 [printer:DeltiQ 2 + FlexPrint 2] inherits = *DeltiQ 2 FlexPrint 2* printer_model = DQ2+FP2 printer_variant = 0.4 max_print_height = 300 [printer:DeltiQ 2 Plus + FlexPrint 2] inherits = *DeltiQ 2 FlexPrint 2* printer_model = DQ2P+FP2 printer_variant = 0.4 max_print_height = 500 [printer:*AzteQ*] inherits = *DeltiQ 2* max_print_height = 400 bed_shape = 149.429x13.0734,147.721x26.0472,144.889x38.8229,140.954x51.303,135.946x63.3927,129.904x75,122.873x86.0365,114.907x96.4181,106.066x106.066,96.4181x114.907,86.0365x122.873,75x129.904,63.3927x135.946,51.303x140.954,38.8229x144.889,26.0472x147.721,13.0734x149.429,9.18485e-15x150,-13.0734x149.429,-26.0472x147.721,-38.8229x144.889,-51.303x140.954,-63.3927x135.946,-75x129.904,-86.0365x122.873,-96.4181x114.907,-106.066x106.066,-114.907x96.4181,-122.873x86.0365,-129.904x75,-135.946x63.3927,-140.954x51.303,-144.889x38.8229,-147.721x26.0472,-149.429x13.0734,-150x1.83697e-14,-149.429x-13.0734,-147.721x-26.0472,-144.889x-38.8229,-140.954x-51.303,-135.946x-63.3927,-129.904x-75,-122.873x-86.0365,-114.907x-96.4181,-106.066x-106.066,-96.4181x-114.907,-86.0365x-122.873,-75x-129.904,-63.3927x-135.946,-51.303x-140.954,-38.8229x-144.889,-26.0472x-147.721,-13.0734x-149.429,-2.75546e-14x-150,13.0734x-149.429,26.0472x-147.721,38.8229x-144.889,51.303x-140.954,63.3927x-135.946,75x-129.904,86.0365x-122.873,96.4181x-114.907,106.066x-106.066,114.907x-96.4181,122.873x-86.0365,129.904x-75,135.946x-63.3927,140.954x-51.303,144.889x-38.8229,147.721x-26.0472,149.429x-13.0734,150x-3.67394e-14 before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed heater\nM141 S0 ; Turn off chamber heater\nM104 S0 ; Turn off hotend heater\n\nG28 ; Home all axes\n\nM107 ; Turn off layer fan\n\nG90 ; Absolute positioning for motion\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5 ; Disable motor hold layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z] printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_AQ\nPRINTER_MODEL_AQI retract_before_travel = 3 retract_before_wipe = 100% retract_layer_change = 1 retract_length = 4 retract_length_toolchange = 10 retract_lift = 0.2 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nM140 S[first_layer_bed_temperature] ; Set and continue - bed temperature\nM104 S150 ; Set and continue - hotend probing temperature\n[start_filament_gcode]\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM109 [filament_notes] ; Set and wait for material specific hotend probing temperature\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S[first_layer_temperature] ; Set and continue - printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder wipe = 1 [printer:AzteQ Industrial] inherits = *AzteQ* printer_model = AQI printer_variant = 0.4 max_print_height = 400 default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum)" default_print_profile = AzteQ Industrial 0.30mm Normal [printer:AzteQ Industrial - 0.6 nozzle] inherits = AzteQ Industrial printer_variant = 0.6 max_layer_height = 0.4 min_layer_height = 0.2 nozzle_diameter = 0.6 default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle" default_print_profile = AzteQ Industrial 0.30mm Normal @0.6 nozzle [presets] print = DeltiQ 0.20mm Normal printer = DeltiQ 2 filament = DeltiQ - PLA - Generic