# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-02-27 14:12+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:39 src/slic3r/GUI/AboutDialog.cpp:291 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:127 src/slic3r/GUI/AboutDialog.cpp:256 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:129 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:199 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:231 src/slic3r/GUI/MainFrame.cpp:64 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:258 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:259 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:260 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:261 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/AppConfig.cpp:114 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:109 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:112 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:115 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:118 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:121 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:128 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:478 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:130 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:134 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:184 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:180 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:222 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:480 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:505 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:66 src/slic3r/GUI/GUI_ObjectList.cpp:2059 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:73 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:77 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:160 #: src/slic3r/GUI/Tab.cpp:2324 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:78 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:84 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:85 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:89 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:92 src/slic3r/GUI/ConfigWizard.cpp:218 #: src/slic3r/GUI/ConfigWizard.cpp:970 src/slic3r/GUI/ConfigWizard.cpp:984 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:135 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:333 #: src/slic3r/GUI/ObjectDataViewModel.cpp:94 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75 #: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:91 #: src/libslic3r/PrintConfig.cpp:122 src/libslic3r/PrintConfig.cpp:188 #: src/libslic3r/PrintConfig.cpp:246 src/libslic3r/PrintConfig.cpp:321 #: src/libslic3r/PrintConfig.cpp:329 src/libslic3r/PrintConfig.cpp:379 #: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:516 #: src/libslic3r/PrintConfig.cpp:534 src/libslic3r/PrintConfig.cpp:712 #: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1292 #: src/libslic3r/PrintConfig.cpp:1310 src/libslic3r/PrintConfig.cpp:1328 #: src/libslic3r/PrintConfig.cpp:1384 src/libslic3r/PrintConfig.cpp:1394 #: src/libslic3r/PrintConfig.cpp:1516 src/libslic3r/PrintConfig.cpp:1524 #: src/libslic3r/PrintConfig.cpp:1565 src/libslic3r/PrintConfig.cpp:1573 #: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1591 #: src/libslic3r/PrintConfig.cpp:1599 src/libslic3r/PrintConfig.cpp:1682 #: src/libslic3r/PrintConfig.cpp:1914 src/libslic3r/PrintConfig.cpp:1985 #: src/libslic3r/PrintConfig.cpp:2019 src/libslic3r/PrintConfig.cpp:2147 #: src/libslic3r/PrintConfig.cpp:2226 src/libslic3r/PrintConfig.cpp:2233 #: src/libslic3r/PrintConfig.cpp:2240 src/libslic3r/PrintConfig.cpp:2270 #: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2290 #: src/libslic3r/PrintConfig.cpp:2450 src/libslic3r/PrintConfig.cpp:2484 #: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2632 #: src/libslic3r/PrintConfig.cpp:2641 src/libslic3r/PrintConfig.cpp:2651 #: src/libslic3r/PrintConfig.cpp:2695 src/libslic3r/PrintConfig.cpp:2705 #: src/libslic3r/PrintConfig.cpp:2717 src/libslic3r/PrintConfig.cpp:2737 #: src/libslic3r/PrintConfig.cpp:2747 src/libslic3r/PrintConfig.cpp:2757 #: src/libslic3r/PrintConfig.cpp:2775 src/libslic3r/PrintConfig.cpp:2790 #: src/libslic3r/PrintConfig.cpp:2804 src/libslic3r/PrintConfig.cpp:2815 #: src/libslic3r/PrintConfig.cpp:2828 src/libslic3r/PrintConfig.cpp:2873 #: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2892 #: src/libslic3r/PrintConfig.cpp:2902 src/libslic3r/PrintConfig.cpp:2918 #: src/libslic3r/PrintConfig.cpp:2942 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 src/libslic3r/PrintConfig.cpp:709 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:94 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:98 src/slic3r/GUI/GUI_Preview.cpp:249 #: src/libslic3r/ExtrusionEntity.cpp:322 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:102 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:155 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:172 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:182 src/slic3r/GUI/BedShapeDialog.cpp:261 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:190 src/slic3r/GUI/BedShapeDialog.cpp:269 #: src/slic3r/GUI/Tab.cpp:3124 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:223 src/slic3r/GUI/BedShapeDialog.cpp:302 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:251 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:487 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:494 src/slic3r/GUI/BedShapeDialog.cpp:543 #: src/slic3r/GUI/BedShapeDialog.cpp:566 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:505 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:513 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:517 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:532 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:555 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:929 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:48 msgid "" "Zero layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:49 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 src/slic3r/GUI/Tab.cpp:1049 #: src/libslic3r/PrintConfig.cpp:71 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:60 msgid "" "Zero first layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:889 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:81 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:89 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:90 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:115 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:119 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:120 #: src/slic3r/GUI/ConfigManipulation.cpp:140 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:136 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:139 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:159 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:162 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:163 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:208 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:210 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:211 #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:96 #: src/slic3r/GUI/GUI_ObjectList.cpp:614 src/slic3r/GUI/Plater.cpp:527 #: src/slic3r/GUI/Tab.cpp:1091 src/slic3r/GUI/Tab.cpp:1092 #: src/libslic3r/PrintConfig.cpp:203 src/libslic3r/PrintConfig.cpp:416 #: src/libslic3r/PrintConfig.cpp:436 src/libslic3r/PrintConfig.cpp:776 #: src/libslic3r/PrintConfig.cpp:790 src/libslic3r/PrintConfig.cpp:827 #: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:991 #: src/libslic3r/PrintConfig.cpp:1009 src/libslic3r/PrintConfig.cpp:1028 #: src/libslic3r/PrintConfig.cpp:1047 src/libslic3r/PrintConfig.cpp:1728 #: src/libslic3r/PrintConfig.cpp:1745 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:317 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:319 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:330 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:332 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1521 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/slic3r/GUI/Preset.cpp:1525 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:971 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:104 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:218 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:222 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:289 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:289 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:290 src/slic3r/GUI/ConfigWizard.cpp:573 #: src/slic3r/GUI/Tab.cpp:3174 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:291 src/slic3r/GUI/ConfigWizard.cpp:574 #: src/slic3r/GUI/Plater.cpp:499 src/slic3r/GUI/Plater.cpp:639 #: src/libslic3r/ExtrusionEntity.cpp:309 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:427 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:429 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:431 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:433 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:438 msgid "" "Remove user profiles - install from scratch (a snapshot will be taken " "beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:481 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:565 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:566 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:603 src/slic3r/GUI/ConfigWizard.cpp:631 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:732 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:732 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:734 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:736 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:761 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:761 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:769 src/slic3r/GUI/Preferences.cpp:64 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:773 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:779 src/slic3r/GUI/Preferences.cpp:80 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:783 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:786 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:791 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:798 src/slic3r/GUI/GUI_ObjectList.cpp:1664 #: src/slic3r/GUI/GUI_ObjectList.cpp:3956 src/slic3r/GUI/Plater.cpp:3225 #: src/slic3r/GUI/Plater.cpp:3934 src/slic3r/GUI/Plater.cpp:3963 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:801 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:805 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:813 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:815 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:820 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:821 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:822 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:856 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:860 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:891 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:891 src/slic3r/GUI/Tab.cpp:1947 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:895 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:929 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:932 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:952 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:952 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:966 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:969 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:979 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:980 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:983 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1017 msgid "Extruder and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1017 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1033 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1034 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1037 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1038 src/slic3r/GUI/ConfigWizard.cpp:1052 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1047 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1048 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1051 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1471 src/slic3r/GUI/ConfigWizard.cpp:2013 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1471 src/slic3r/GUI/ConfigWizard.cpp:2015 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1525 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1530 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1751 src/slic3r/GUI/DoubleSlider.cpp:1905 #: src/slic3r/GUI/DoubleSlider.cpp:1926 src/slic3r/GUI/GUI.cpp:245 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1760 msgid "You have to select at least one filament for selected printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1761 msgid "Do you want to automatic select default filaments?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1771 msgid "You have to select at least one material for selected printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1772 msgid "Do you want to automatic select default materials?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1976 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1979 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1980 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1981 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1982 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1995 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1998 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2013 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2013 src/slic3r/GUI/GUI_ObjectList.cpp:3553 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2015 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2015 msgid "Layer height:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2109 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2110 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2112 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2113 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:79 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:950 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:952 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:955 #, possible-c-format msgid "Jump to height %s or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:957 src/slic3r/GUI/DoubleSlider.cpp:1529 #: src/slic3r/GUI/DoubleSlider.cpp:1651 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:960 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:970 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:984 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:986 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:988 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:989 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:991 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:992 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:998 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1005 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1006 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1009 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1011 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1019 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1021 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1024 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1027 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1030 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1035 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1037 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1038 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1134 src/slic3r/GUI/DoubleSlider.cpp:1170 #: src/slic3r/GUI/GLCanvas3D.cpp:977 src/slic3r/GUI/GUI_ObjectList.cpp:1704 #: src/slic3r/GUI/Tab.cpp:2320 src/libslic3r/GCode/PreviewData.cpp:445 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1135 src/slic3r/GUI/GUI_ObjectList.cpp:1705 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1144 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1144 src/slic3r/GUI/GUI_ObjectList.cpp:1671 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1145 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1147 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1171 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1179 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1180 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1477 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1487 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1490 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1508 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1509 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1510 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1516 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1517 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1518 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1519 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1532 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1618 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1619 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1634 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1635 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1650 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1899 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1900 src/slic3r/GUI/DoubleSlider.cpp:1916 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1902 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1903 src/slic3r/GUI/DoubleSlider.cpp:1924 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1917 msgid "" "Select YES if you want to delete all saved tool changes, \n" "\tNO if you want all tool changes switch to color changes, \n" "\tor CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1920 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1922 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1923 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52 #: src/libslic3r/PrintConfig.cpp:362 src/libslic3r/PrintConfig.cpp:994 #: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1690 #: src/libslic3r/PrintConfig.cpp:1750 src/libslic3r/PrintConfig.cpp:1930 #: src/libslic3r/PrintConfig.cpp:1976 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:136 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:139 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:150 src/slic3r/GUI/OptionsGroup.cpp:580 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:175 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:195 src/slic3r/GUI/Field.cpp:226 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:376 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:204 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:240 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:243 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1658 #: src/slic3r/GUI/Tab.cpp:1721 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 #: src/slic3r/GUI/Mouse3DController.cpp:364 #: src/slic3r/GUI/PrintHostDialogs.cpp:161 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:902 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:906 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:234 src/slic3r/GUI/GLCanvas3D.cpp:4573 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:237 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:240 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:243 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:246 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:249 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:252 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:255 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:258 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:261 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:264 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:267 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:273 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:277 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:288 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:294 src/libslic3r/PrintConfig.cpp:511 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:304 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:313 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:599 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:685 msgid "An object outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:686 msgid "A toolpath outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:687 msgid "SLA supports outside the print area were detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:688 msgid "Some objects are not visible" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:690 msgid "" "An object outside the print area was detected\n" "Resolve the current problem to continue slicing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:904 src/slic3r/GUI/GLCanvas3D.cpp:933 msgid "Default print color" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:934 src/slic3r/GUI/GLCanvas3D.cpp:943 #: src/slic3r/GUI/GLCanvas3D.cpp:982 msgid "Pause print or custom G-code" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:955 #, possible-c-format msgid "up to %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:959 #, possible-c-format msgid "above %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:963 #, possible-c-format msgid "%.2f - %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:995 #, possible-c-format msgid "Color change for Extruder %d at %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1305 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1701 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1709 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1717 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2053 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2921 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:562 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3001 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:564 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3505 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4047 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4047 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4065 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4065 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4467 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4475 src/slic3r/GUI/GUI_ObjectList.cpp:1718 #: src/slic3r/GUI/Plater.cpp:3931 src/slic3r/GUI/Plater.cpp:3953 #: src/slic3r/GUI/Tab.cpp:3124 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4484 src/slic3r/GUI/KBShortcutsDialog.cpp:129 #: src/slic3r/GUI/Plater.cpp:4669 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4493 src/slic3r/GUI/KBShortcutsDialog.cpp:157 #: src/slic3r/GUI/Plater.cpp:2754 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4493 src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4505 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4514 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4526 src/slic3r/GUI/Plater.cpp:3788 #: src/slic3r/GUI/Plater.cpp:3800 src/slic3r/GUI/Plater.cpp:3940 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4537 src/slic3r/GUI/Plater.cpp:3942 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4550 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4560 src/slic3r/GUI/GUI_ObjectList.cpp:1487 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4624 src/slic3r/GUI/KBShortcutsDialog.cpp:130 #: src/slic3r/GUI/MainFrame.cpp:581 msgid "Undo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4624 src/slic3r/GUI/GLCanvas3D.cpp:4657 msgid "Click right mouse button to open History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4641 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4657 src/slic3r/GUI/KBShortcutsDialog.cpp:131 #: src/slic3r/GUI/MainFrame.cpp:584 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4673 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6598 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6617 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:284 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:287 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:290 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw_renderer parameter." msgstr "" #: src/slic3r/GUI/GLCanvas3DManager.cpp:292 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:144 src/libslic3r/PrintConfig.cpp:3402 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:168 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:169 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:175 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:45 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45 #: src/libslic3r/PrintConfig.cpp:2934 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:59 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:52 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:421 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:539 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:813 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:885 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:977 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:1059 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:48 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:480 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:499 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517 #: src/libslic3r/PrintConfig.cpp:3451 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:47 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:518 #: src/libslic3r/PrintConfig.cpp:3466 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1371 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1374 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1375 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 #: src/libslic3r/PrintConfig.cpp:2764 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1377 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:494 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:631 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:820 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:888 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:996 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1017 msgid "SLA gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1045 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1046 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1058 msgid "SLA gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1097 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1196 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270 src/slic3r/GUI/GUI.cpp:251 #: src/slic3r/GUI/Tab.cpp:3084 src/slic3r/GUI/WipeTowerDialog.cpp:45 #: src/slic3r/GUI/WipeTowerDialog.cpp:366 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1334 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1345 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1363 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1366 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1367 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1363 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1364 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1364 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1365 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1368 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1369 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1365 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1366 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1367 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1368 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1369 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1370 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1372 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1372 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1373 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1376 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:489 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:563 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:138 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:141 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:442 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:450 src/slic3r/GUI/GUI_App.cpp:459 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:466 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:474 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:555 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:567 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:629 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:629 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:797 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:800 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:800 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:801 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:801 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:802 msgid "Check for updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:802 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:804 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:810 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:813 src/slic3r/GUI/wxExtensions.cpp:753 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:813 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:814 src/slic3r/GUI/GUI_ObjectList.cpp:104 #: src/slic3r/GUI/GUI_ObjectList.cpp:622 src/slic3r/GUI/Tab.cpp:1087 #: src/slic3r/GUI/Tab.cpp:1102 src/slic3r/GUI/Tab.cpp:1201 #: src/slic3r/GUI/Tab.cpp:1204 src/slic3r/GUI/Tab.cpp:1470 #: src/slic3r/GUI/Tab.cpp:1967 src/slic3r/GUI/Tab.cpp:3661 #: src/slic3r/GUI/wxExtensions.cpp:754 src/libslic3r/PrintConfig.cpp:88 #: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:223 #: src/libslic3r/PrintConfig.cpp:1037 src/libslic3r/PrintConfig.cpp:2276 #: src/libslic3r/PrintConfig.cpp:2448 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:814 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:815 src/slic3r/GUI/wxExtensions.cpp:755 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:815 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:820 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:820 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:822 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:824 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:824 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:839 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:839 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:882 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:884 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:885 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:908 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:932 msgid "The presets on the following tabs were modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:932 src/slic3r/GUI/Tab.cpp:2946 msgid "Discard changes and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:935 msgid "Unsaved Presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1084 src/slic3r/GUI/Tab.cpp:2958 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1085 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1086 src/slic3r/GUI/Plater.cpp:2313 #: src/slic3r/GUI/Tab.cpp:2960 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1103 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:153 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:162 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:95 #: src/slic3r/GUI/GUI_ObjectList.cpp:613 src/libslic3r/PrintConfig.cpp:72 #: src/libslic3r/PrintConfig.cpp:175 src/libslic3r/PrintConfig.cpp:184 #: src/libslic3r/PrintConfig.cpp:408 src/libslic3r/PrintConfig.cpp:470 #: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:890 #: src/libslic3r/PrintConfig.cpp:1075 src/libslic3r/PrintConfig.cpp:1374 #: src/libslic3r/PrintConfig.cpp:1441 src/libslic3r/PrintConfig.cpp:1622 #: src/libslic3r/PrintConfig.cpp:2074 src/libslic3r/PrintConfig.cpp:2133 #: src/libslic3r/PrintConfig.cpp:2142 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:97 #: src/slic3r/GUI/GUI_ObjectList.cpp:615 src/slic3r/GUI/GUI_Preview.cpp:246 #: src/slic3r/GUI/Tab.cpp:1120 src/slic3r/GUI/Tab.cpp:1121 #: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/PrintConfig.cpp:370 #: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1866 #: src/libslic3r/PrintConfig.cpp:1872 src/libslic3r/PrintConfig.cpp:1880 #: src/libslic3r/PrintConfig.cpp:1892 src/libslic3r/PrintConfig.cpp:1902 #: src/libslic3r/PrintConfig.cpp:1910 src/libslic3r/PrintConfig.cpp:1925 #: src/libslic3r/PrintConfig.cpp:1946 src/libslic3r/PrintConfig.cpp:1958 #: src/libslic3r/PrintConfig.cpp:1974 src/libslic3r/PrintConfig.cpp:1983 #: src/libslic3r/PrintConfig.cpp:1992 src/libslic3r/PrintConfig.cpp:2003 #: src/libslic3r/PrintConfig.cpp:2017 src/libslic3r/PrintConfig.cpp:2025 #: src/libslic3r/PrintConfig.cpp:2026 src/libslic3r/PrintConfig.cpp:2035 #: src/libslic3r/PrintConfig.cpp:2043 src/libslic3r/PrintConfig.cpp:2057 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:101 #: src/slic3r/GUI/GUI_ObjectList.cpp:619 src/libslic3r/PrintConfig.cpp:2252 #: src/libslic3r/PrintConfig.cpp:2260 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:45 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:51 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:52 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:53 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:54 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:616 #: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/Tab.cpp:1145 #: src/libslic3r/PrintConfig.cpp:235 src/libslic3r/PrintConfig.cpp:458 #: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:1048 #: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1668 #: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1768 #: src/libslic3r/PrintConfig.cpp:2118 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:99 src/slic3r/GUI/GUI_ObjectList.cpp:617 #: src/slic3r/GUI/Tab.cpp:1180 src/slic3r/GUI/Tab.cpp:1838 #: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:1002 #: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1737 #: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1965 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:100 src/slic3r/GUI/GUI_ObjectList.cpp:618 #: src/libslic3r/PrintConfig.cpp:447 src/libslic3r/PrintConfig.cpp:555 #: src/libslic3r/PrintConfig.cpp:877 src/libslic3r/PrintConfig.cpp:1010 #: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1757 #: src/libslic3r/PrintConfig.cpp:1947 src/libslic3r/PrintConfig.cpp:2106 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/GUI_ObjectList.cpp:624 #: src/slic3r/GUI/Plater.cpp:495 src/slic3r/GUI/Tab.cpp:3604 #: src/slic3r/GUI/Tab.cpp:3605 src/libslic3r/PrintConfig.cpp:2614 #: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2630 #: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2649 #: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:2682 #: src/libslic3r/PrintConfig.cpp:2693 src/libslic3r/PrintConfig.cpp:2703 #: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2725 #: src/libslic3r/PrintConfig.cpp:2735 src/libslic3r/PrintConfig.cpp:2744 #: src/libslic3r/PrintConfig.cpp:2754 src/libslic3r/PrintConfig.cpp:2765 #: src/libslic3r/PrintConfig.cpp:2773 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:107 src/slic3r/GUI/GUI_ObjectList.cpp:625 #: src/slic3r/GUI/Plater.cpp:635 src/slic3r/GUI/Tab.cpp:3636 #: src/slic3r/GUI/Tab.cpp:3637 src/libslic3r/PrintConfig.cpp:2781 #: src/libslic3r/PrintConfig.cpp:2788 src/libslic3r/PrintConfig.cpp:2802 #: src/libslic3r/PrintConfig.cpp:2813 src/libslic3r/PrintConfig.cpp:2823 #: src/libslic3r/PrintConfig.cpp:2845 src/libslic3r/PrintConfig.cpp:2856 #: src/libslic3r/PrintConfig.cpp:2863 src/libslic3r/PrintConfig.cpp:2870 #: src/libslic3r/PrintConfig.cpp:2881 src/libslic3r/PrintConfig.cpp:2890 #: src/libslic3r/PrintConfig.cpp:2899 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:108 src/slic3r/GUI/Tab.cpp:3654 #: src/slic3r/GUI/Tab.cpp:3655 src/libslic3r/SLA/Hollowing.cpp:46 #: src/libslic3r/SLA/Hollowing.cpp:58 src/libslic3r/SLA/Hollowing.cpp:67 #: src/libslic3r/SLA/Hollowing.cpp:76 src/libslic3r/PrintConfig.cpp:2909 #: src/libslic3r/PrintConfig.cpp:2916 src/libslic3r/PrintConfig.cpp:2926 #: src/libslic3r/PrintConfig.cpp:2935 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:270 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:278 src/slic3r/GUI/Tab.cpp:1434 #: src/slic3r/GUI/wxExtensions.cpp:598 src/libslic3r/PrintConfig.cpp:487 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:282 src/slic3r/GUI/GUI_ObjectList.cpp:394 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:339 #, possible-c-format msgid "Auto-repaired (%d errors):" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:346 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:347 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:348 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:349 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:350 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:351 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:359 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:396 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:398 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:402 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:404 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:457 src/slic3r/GUI/GUI_ObjectList.cpp:469 #: src/slic3r/GUI/GUI_ObjectList.cpp:917 src/slic3r/GUI/GUI_ObjectList.cpp:3967 #: src/slic3r/GUI/GUI_ObjectList.cpp:3977 #: src/slic3r/GUI/GUI_ObjectList.cpp:4012 #: src/slic3r/GUI/ObjectDataViewModel.cpp:200 #: src/slic3r/GUI/ObjectDataViewModel.cpp:257 #: src/slic3r/GUI/ObjectDataViewModel.cpp:282 #: src/slic3r/GUI/ObjectDataViewModel.cpp:490 #: src/slic3r/GUI/ObjectDataViewModel.cpp:1753 msgid "default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:536 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:551 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:551 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1091 #: src/slic3r/GUI/GUI_ObjectList.cpp:3781 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1106 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1106 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1182 #: src/slic3r/GUI/GUI_ObjectList.cpp:1530 #: src/slic3r/GUI/GUI_ObjectList.cpp:1536 #: src/slic3r/GUI/GUI_ObjectList.cpp:1849 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1265 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1314 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1315 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1316 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1386 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1387 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1388 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1427 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1432 #: src/slic3r/GUI/GUI_ObjectList.cpp:1464 #: src/slic3r/GUI/GUI_ObjectList.cpp:1468 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1432 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1432 msgid "Sphere" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1432 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1500 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1509 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1589 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1599 #: src/slic3r/GUI/GUI_ObjectList.cpp:1611 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1611 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1621 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1636 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1647 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1657 src/slic3r/GUI/Plater.cpp:3966 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1664 #: src/slic3r/GUI/GUI_ObjectList.cpp:3956 src/slic3r/GUI/Plater.cpp:3934 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1671 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1704 src/libslic3r/PrintConfig.cpp:335 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1724 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1724 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1793 #: src/slic3r/GUI/GUI_ObjectList.cpp:2051 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1879 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1918 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1993 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2022 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2140 #: src/slic3r/GUI/GUI_ObjectList.cpp:2242 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2152 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2176 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2192 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2223 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2227 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2246 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2270 src/slic3r/GUI/Plater.cpp:2978 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2274 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2328 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2454 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2466 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2479 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2483 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2488 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2494 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2500 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2507 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2507 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2693 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2830 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2896 #: src/slic3r/GUI/GUI_ObjectList.cpp:2925 #: src/slic3r/GUI/GUI_ObjectList.cpp:2943 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3003 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3291 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3299 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3417 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3418 #: src/slic3r/GUI/GUI_ObjectList.cpp:3551 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3418 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3420 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3421 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3422 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3425 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3430 #: src/slic3r/GUI/GUI_ObjectList.cpp:3505 src/slic3r/GUI/Plater.cpp:141 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3546 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3551 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3551 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3551 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3553 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3558 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3803 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3803 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3819 #: src/slic3r/GUI/GUI_ObjectList.cpp:3926 src/slic3r/GUI/Tab.cpp:3456 #: src/slic3r/GUI/Tab.cpp:3460 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3820 #: src/slic3r/GUI/GUI_ObjectList.cpp:3927 src/slic3r/GUI/Tab.cpp:3457 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3971 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3972 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3997 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4094 src/slic3r/GUI/Selection.cpp:1474 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4094 src/slic3r/GUI/Selection.cpp:1474 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155 src/libslic3r/GCode.cpp:638 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:215 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:457 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:458 #: src/slic3r/GUI/Mouse3DController.cpp:304 #: src/slic3r/GUI/Mouse3DController.cpp:321 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:263 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:297 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:397 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:459 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:750 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:781 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:846 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:875 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:878 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:59 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:95 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:101 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:152 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:218 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/GUI_Preview.cpp:575 #: src/libslic3r/GCode/PreviewData.cpp:345 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:222 src/libslic3r/PrintConfig.cpp:500 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:223 src/libslic3r/PrintConfig.cpp:2238 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:225 src/slic3r/GUI/Tab.cpp:1457 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:226 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:227 src/slic3r/GUI/GUI_Preview.cpp:335 #: src/slic3r/GUI/GUI_Preview.cpp:519 src/slic3r/GUI/GUI_Preview.cpp:574 #: src/slic3r/GUI/GUI_Preview.cpp:835 src/libslic3r/GCode/PreviewData.cpp:357 msgid "Tool" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:228 src/slic3r/GUI/GUI_Preview.cpp:572 #: src/libslic3r/GCode/PreviewData.cpp:359 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:231 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:234 src/slic3r/GUI/GUI_Preview.cpp:235 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/ExtrusionEntity.cpp:310 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:311 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:312 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:313 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:314 #: src/libslic3r/PrintConfig.cpp:1756 src/libslic3r/PrintConfig.cpp:1767 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:315 #: src/libslic3r/PrintConfig.cpp:2105 src/libslic3r/PrintConfig.cpp:2117 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:316 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:317 #: src/libslic3r/PrintConfig.cpp:918 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:245 src/slic3r/GUI/Tab.cpp:1111 #: src/libslic3r/ExtrusionEntity.cpp:318 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:320 #: src/libslic3r/PrintConfig.cpp:1991 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:248 src/slic3r/GUI/Tab.cpp:1191 #: src/libslic3r/ExtrusionEntity.cpp:321 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:253 src/libslic3r/PrintConfig.cpp:2152 msgid "Travel" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:254 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:255 msgid "Unretractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:256 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:257 msgid "Legend" msgstr "" #: src/slic3r/GUI/Job.hpp:123 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:41 src/slic3r/GUI/MainFrame.cpp:708 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:116 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Plater.cpp:891 #: src/slic3r/GUI/Plater.cpp:5521 src/libslic3r/PrintConfig.cpp:3353 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Plater.cpp:5522 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:124 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 #: src/slic3r/GUI/PrintHostDialogs.cpp:136 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 src/slic3r/GUI/Preferences.cpp:10 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 #: src/slic3r/GUI/KBShortcutsDialog.cpp:204 #: src/slic3r/GUI/KBShortcutsDialog.cpp:214 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 #: src/slic3r/GUI/KBShortcutsDialog.cpp:216 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:175 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:177 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:178 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:180 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:181 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:182 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:183 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:184 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:192 src/slic3r/GUI/MainFrame.cpp:204 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:195 #, possible-c-format msgid "" "Press to snap by 5% in Gizmo scale\n" "or to snap by 1mm in Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 msgid "" "Scale selection to fit print volume\n" "in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 msgid "Press to activate one direction scaling in Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 msgid "" "Press to scale (in Gizmo scale) or rotate (in Gizmo rotate)\n" "selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:201 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:204 #: src/slic3r/GUI/KBShortcutsDialog.cpp:206 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 msgid "Show/Hide Legend" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/Plater.cpp:4105 #: src/slic3r/GUI/Tab.cpp:2390 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:214 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:216 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Layers Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:245 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:66 msgid "" " - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/" "releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:174 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:405 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:405 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:408 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:408 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:413 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:422 msgid "The selected project is no more available" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:422 src/slic3r/GUI/MainFrame.cpp:785 #: src/slic3r/GUI/PrintHostDialogs.cpp:231 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:446 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:446 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:460 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:460 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:464 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:464 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:467 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:467 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:471 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:471 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:474 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:477 src/slic3r/GUI/MainFrame.cpp:749 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:477 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:481 src/slic3r/GUI/MainFrame.cpp:750 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:481 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:486 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:486 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:489 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:489 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:492 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:492 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:496 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:496 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:500 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:500 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:503 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:503 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:506 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:512 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:512 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:518 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:518 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:524 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:524 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:532 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:532 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:536 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:536 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:540 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:540 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:565 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:566 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:568 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:569 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:572 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:573 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:575 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:576 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:580 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:583 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:588 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:589 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:591 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:592 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:596 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:597 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:606 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:606 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:614 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:614 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:617 src/slic3r/GUI/MainFrame.cpp:752 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:617 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:621 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:621 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:626 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:626 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:629 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:629 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:648 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:648 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:658 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:658 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:662 src/libslic3r/PrintConfig.cpp:2132 #: src/libslic3r/PrintConfig.cpp:2141 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:662 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:665 src/libslic3r/PrintConfig.cpp:174 #: src/libslic3r/PrintConfig.cpp:183 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:665 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:667 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:667 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:669 src/libslic3r/PrintConfig.cpp:1632 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:669 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:671 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:671 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:673 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:673 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:676 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:676 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:684 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:684 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:686 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:686 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:692 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:693 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:699 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:699 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:701 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:701 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:703 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:703 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:705 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:705 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:708 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:721 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:722 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:723 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:724 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:727 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:749 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:750 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:752 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:773 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:784 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:790 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:790 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:791 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:826 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:826 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:826 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:838 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:847 src/slic3r/GUI/Plater.cpp:3121 #: src/slic3r/GUI/Plater.cpp:5107 src/slic3r/GUI/Tab.cpp:1221 #: src/slic3r/GUI/Tab.cpp:3662 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:849 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:872 msgid " was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:874 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:889 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:899 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:911 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:911 src/libslic3r/PrintConfig.cpp:3447 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:925 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:944 src/slic3r/GUI/MainFrame.cpp:1006 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:980 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1027 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:274 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:289 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:296 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:300 #: src/slic3r/GUI/Mouse3DController.cpp:317 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:308 #: src/slic3r/GUI/Mouse3DController.cpp:317 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:313 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:73 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:74 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:56 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:60 #: src/slic3r/GUI/ObjectDataViewModel.cpp:216 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:67 src/slic3r/GUI/Tab.cpp:3512 #: src/slic3r/GUI/Tab.cpp:3600 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:94 msgid "Range" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:258 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:258 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/Plater.cpp:161 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:162 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:163 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:166 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:216 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:235 src/slic3r/GUI/Plater.cpp:1229 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:236 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:237 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:238 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:239 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:240 src/slic3r/GUI/Plater.cpp:1216 #: src/slic3r/GUI/Plater.cpp:1258 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:241 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:343 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/Plater.cpp:498 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:500 src/libslic3r/PrintConfig.cpp:1901 #: src/libslic3r/PrintConfig.cpp:2674 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:501 src/slic3r/GUI/Plater.cpp:624 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:502 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:534 src/slic3r/GUI/Tab.cpp:1117 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:536 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:544 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:638 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:640 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:641 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:815 msgid "Print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:816 src/slic3r/GUI/Tab.cpp:1425 #: src/slic3r/GUI/Tab.cpp:1426 msgid "Filament" msgstr "" #: src/slic3r/GUI/Plater.cpp:817 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:818 src/slic3r/GUI/Preset.cpp:1524 msgid "SLA material" msgstr "" #: src/slic3r/GUI/Plater.cpp:819 msgid "Printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:878 src/slic3r/GUI/Plater.cpp:5522 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:879 msgid "Remove device" msgstr "" #: src/slic3r/GUI/Plater.cpp:880 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/Plater.cpp:892 src/slic3r/GUI/Plater.cpp:3121 #: src/slic3r/GUI/Plater.cpp:5110 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:1042 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1152 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1157 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1160 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:1170 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1191 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1194 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1194 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1231 src/slic3r/GUI/Plater.cpp:1245 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1231 src/slic3r/GUI/Plater.cpp:1245 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1243 src/libslic3r/PrintConfig.cpp:760 #: src/libslic3r/PrintConfig.cpp:2510 src/libslic3r/PrintConfig.cpp:2511 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1260 src/libslic3r/PrintConfig.cpp:582 msgid "Color" msgstr "" #: src/slic3r/GUI/Plater.cpp:1261 msgid "Pause" msgstr "" #: src/slic3r/GUI/Plater.cpp:1286 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1291 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1395 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:1399 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:2151 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2273 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:2283 #, possible-c-format msgid "Processing input file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:2311 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:2312 src/slic3r/GUI/Tab.cpp:2959 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/Plater.cpp:2357 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2360 src/slic3r/GUI/Plater.cpp:2413 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2367 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2368 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2390 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2410 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2426 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:2528 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2529 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2591 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2598 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2604 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2610 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2712 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2723 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2760 msgid "Hollow" msgstr "" #: src/slic3r/GUI/Plater.cpp:2767 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:2813 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Plater.cpp:2835 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Plater.cpp:2841 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2842 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Plater.cpp:2858 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:2891 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2892 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Plater.cpp:2922 msgid "Indexing hollowed object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2926 msgid "Hollowing cancelled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2927 msgid "Hollowing done." msgstr "" #: src/slic3r/GUI/Plater.cpp:2929 msgid "Hollowing failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2970 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2981 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3106 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:3115 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:3153 src/slic3r/GUI/PrintHostDialogs.cpp:232 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:3170 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3286 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3321 msgid "It is not allowed to change the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3321 msgid "Do you want to retry" msgstr "" #: src/slic3r/GUI/Plater.cpp:3339 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3428 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3433 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3452 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3473 msgid "Fix Throught NetFabb" msgstr "" #: src/slic3r/GUI/Plater.cpp:3664 msgid "Export failed" msgstr "" #: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/PrintHostDialogs.cpp:233 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:3931 src/slic3r/GUI/Plater.cpp:3953 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3940 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3942 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3944 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:3944 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3963 msgid "Reload the selected object from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3966 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3995 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3995 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3997 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3997 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3999 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3999 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4002 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:4002 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4014 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4014 src/slic3r/GUI/Plater.cpp:4034 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4016 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4016 src/slic3r/GUI/Plater.cpp:4048 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4019 src/slic3r/GUI/Plater.cpp:4034 #: src/slic3r/GUI/Plater.cpp:4048 src/libslic3r/PrintConfig.cpp:3471 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:4019 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4040 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:4040 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:4097 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4400 msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" #: src/slic3r/GUI/Plater.cpp:4575 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:4603 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4607 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4669 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:4677 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4685 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4720 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4751 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4752 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4756 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:4786 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:4839 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4839 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4985 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5002 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5005 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5038 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5043 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5203 #, possible-c-format msgid "" "Unmounting successful. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:5521 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:5606 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1796 #: src/slic3r/GUI/Tab.cpp:2040 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:39 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:41 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:47 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:49 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:55 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:57 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:66 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:72 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:74 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:82 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:87 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:89 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:95 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:97 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:104 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:106 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:113 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:119 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:121 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:126 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:128 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:133 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:143 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:145 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:172 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preferences.cpp:222 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:237 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preset.cpp:247 msgid "modified" msgstr "" #: src/slic3r/GUI/Preset.cpp:1109 src/slic3r/GUI/Preset.cpp:1164 #: src/slic3r/GUI/Preset.cpp:1242 src/slic3r/GUI/Preset.cpp:1284 #: src/slic3r/GUI/PresetBundle.cpp:1583 src/slic3r/GUI/PresetBundle.cpp:1672 msgid "System presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:1168 src/slic3r/GUI/Preset.cpp:1288 #: src/slic3r/GUI/PresetBundle.cpp:1677 msgid "User presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:1201 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/Preset.cpp:1203 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/Preset.cpp:1522 msgid "filament" msgstr "" #: src/slic3r/GUI/Preset.cpp:1523 msgid "SLA print" msgstr "" #: src/slic3r/GUI/PresetBundle.cpp:1704 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:29 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:36 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:40 msgid "During the other layers, fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:42 msgid "Fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:48 msgid "will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:51 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:53 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:55 msgid "will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:156 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:165 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:174 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:184 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:192 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:203 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:213 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:220 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:223 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:224 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:225 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:229 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:247 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:263 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:270 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:274 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:304 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:317 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:320 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:323 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:336 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:339 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:342 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:149 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:150 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:151 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:152 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:153 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:154 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:157 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:159 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:198 #: src/slic3r/GUI/PrintHostDialogs.cpp:229 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:230 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:234 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:272 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83 #: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:688 #: src/libslic3r/PrintConfig.cpp:703 src/libslic3r/PrintConfig.cpp:2408 #: src/libslic3r/PrintConfig.cpp:2417 src/libslic3r/PrintConfig.cpp:2527 #: src/libslic3r/PrintConfig.cpp:2535 src/libslic3r/PrintConfig.cpp:2543 #: src/libslic3r/PrintConfig.cpp:2550 src/libslic3r/PrintConfig.cpp:2558 #: src/libslic3r/PrintConfig.cpp:2566 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:601 #: src/libslic3r/PrintConfig.cpp:1250 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/Selection.cpp:146 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:187 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:219 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:238 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:256 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:275 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:376 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:402 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:939 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/Selection.cpp:1475 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:1475 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:78 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:154 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:50 src/libslic3r/PrintConfig.cpp:265 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:51 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:56 src/libslic3r/PrintConfig.cpp:280 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:57 msgid "Select the print profiles this profile is compatible with." msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:133 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:134 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:139 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:241 msgid "Add a new printer" msgstr "" #: src/slic3r/GUI/Tab.cpp:953 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:955 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:957 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:960 #, possible-c-format msgid "" "Current preset is inherited from:\n" "\t%s" msgstr "" #: src/slic3r/GUI/Tab.cpp:964 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:965 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:966 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:970 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:976 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:984 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:987 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1001 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1005 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1013 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1014 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1048 src/slic3r/GUI/Tab.cpp:3598 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1053 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1064 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1065 src/libslic3r/PrintConfig.cpp:1780 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1069 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1080 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1098 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1110 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1127 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1131 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1146 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1158 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1161 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1164 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1171 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1179 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1187 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1205 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1215 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1218 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1227 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1230 src/slic3r/GUI/Tab.cpp:3665 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1231 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1233 msgid "Extruder clearance (mm)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1238 src/slic3r/GUI/Tab.cpp:3666 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1245 src/libslic3r/PrintConfig.cpp:1453 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1251 src/slic3r/GUI/Tab.cpp:1252 #: src/slic3r/GUI/Tab.cpp:1540 src/slic3r/GUI/Tab.cpp:1541 #: src/slic3r/GUI/Tab.cpp:2012 src/slic3r/GUI/Tab.cpp:2013 #: src/slic3r/GUI/Tab.cpp:2128 src/slic3r/GUI/Tab.cpp:2129 #: src/slic3r/GUI/Tab.cpp:3535 src/slic3r/GUI/Tab.cpp:3536 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1258 src/slic3r/GUI/Tab.cpp:1548 #: src/slic3r/GUI/Tab.cpp:2019 src/slic3r/GUI/Tab.cpp:2135 #: src/slic3r/GUI/Tab.cpp:3543 src/slic3r/GUI/Tab.cpp:3671 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1259 src/slic3r/GUI/Tab.cpp:1549 #: src/slic3r/GUI/Tab.cpp:2020 src/slic3r/GUI/Tab.cpp:2136 #: src/slic3r/GUI/Tab.cpp:3544 src/slic3r/GUI/Tab.cpp:3672 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1323 src/slic3r/GUI/Tab.cpp:1378 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1324 src/slic3r/GUI/Tab.cpp:1383 #: src/slic3r/GUI/Tab.cpp:2370 msgid "Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:1433 src/libslic3r/PrintConfig.cpp:2067 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1439 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1444 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1445 src/libslic3r/PrintConfig.cpp:1355 #: src/libslic3r/PrintConfig.cpp:2200 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1456 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1465 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1471 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1478 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1488 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1491 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1505 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1527 src/slic3r/GUI/Tab.cpp:1975 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1976 #: src/libslic3r/PrintConfig.cpp:1813 src/libslic3r/PrintConfig.cpp:1828 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1534 src/slic3r/GUI/Tab.cpp:1982 #: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:395 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1591 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:1915 msgid "Test" msgstr "" #: src/slic3r/GUI/Tab.cpp:1687 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/Tab.cpp:1693 src/slic3r/GUI/Tab.cpp:1928 msgid "Success!" msgstr "" #: src/slic3r/GUI/Tab.cpp:1713 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/Tab.cpp:1728 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/Tab.cpp:1729 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1757 #, possible-c-format msgid "" "HTTPS CA File:\n" " \tOn this system, %s uses HTTPS certificates from the system Certificate " "Store or Keychain.\n" " \tTo use a custom CA file, please import your CA file into Certificate " "Store / Keychain." msgstr "" #: src/slic3r/GUI/Tab.cpp:1797 src/slic3r/GUI/Tab.cpp:2041 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:1802 src/slic3r/GUI/Tab.cpp:2046 #: src/slic3r/GUI/Tab.cpp:3176 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:1834 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:1839 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:1867 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1870 src/slic3r/GUI/Tab.cpp:2340 #: src/libslic3r/PrintConfig.cpp:1326 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:1900 msgid "USB/Serial connection" msgstr "" #: src/slic3r/GUI/Tab.cpp:1901 src/libslic3r/PrintConfig.cpp:1661 msgid "Serial port" msgstr "" #: src/slic3r/GUI/Tab.cpp:1906 msgid "Rescan serial ports" msgstr "" #: src/slic3r/GUI/Tab.cpp:1928 msgid "Connection to printer works correctly." msgstr "" #: src/slic3r/GUI/Tab.cpp:1931 msgid "Connection failed." msgstr "" #: src/slic3r/GUI/Tab.cpp:1944 src/slic3r/GUI/Tab.cpp:2123 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/Tab.cpp:1988 src/libslic3r/PrintConfig.cpp:153 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1994 src/libslic3r/PrintConfig.cpp:1080 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2000 src/libslic3r/PrintConfig.cpp:2093 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2006 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2078 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2093 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2094 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2100 src/slic3r/GUI/Tab.cpp:3519 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2117 src/slic3r/GUI/Tab.cpp:3515 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2188 src/slic3r/GUI/Tab.cpp:2273 #: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:1146 #: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1179 #: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:1199 #: src/libslic3r/PrintConfig.cpp:1209 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2202 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2203 msgid "Normal" msgstr "" #: src/slic3r/GUI/Tab.cpp:2208 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2209 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Tab.cpp:2217 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2222 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2229 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2234 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2298 src/slic3r/GUI/Tab.cpp:2306 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2307 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2338 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2362 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2367 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2373 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2386 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2394 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2575 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2577 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:2919 #, possible-c-format msgid "Default preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2920 #, possible-c-format msgid "Preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2937 msgid "has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:2940 msgid "is not compatible with printer" msgstr "" #: src/slic3r/GUI/Tab.cpp:2941 msgid "is not compatible with print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:2943 msgid "and it has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:2947 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/Tab.cpp:3045 msgctxt "PresetName" msgid "%1% - Copy" msgstr "" #: src/slic3r/GUI/Tab.cpp:3068 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:3073 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:3077 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:3082 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/Tab.cpp:3083 msgid "Replace?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3121 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3121 msgid "delete" msgstr "" #. TRN remove/delete #: src/slic3r/GUI/Tab.cpp:3123 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3126 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3252 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3254 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3256 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3258 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3263 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3265 msgid "" "for the left button: \tindicates a non-system (or non-default) preset,\n" "for the right button: \tindicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3268 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3270 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3280 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3282 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3285 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3288 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3290 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3296 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3297 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3303 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3304 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #. TRN Preset #: src/slic3r/GUI/Tab.cpp:3417 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3461 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3465 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/Tab.cpp:3478 src/slic3r/GUI/Tab.cpp:3480 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:3608 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:3613 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:3627 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:3632 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.hpp:328 src/slic3r/GUI/Tab.hpp:431 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:355 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:391 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:416 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:443 msgid "Save preset" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125 #: src/slic3r/GUI/UpdateDialogs.cpp:183 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:249 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:286 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:303 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:303 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:308 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:15 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:41 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:83 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:85 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:89 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:91 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:142 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:254 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:255 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:263 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:264 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:276 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:285 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:286 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:365 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:703 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:704 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:68 src/slic3r/Utils/OctoPrint.cpp:68 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:83 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:89 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:89 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:49 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:54 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:82 src/slic3r/Utils/Duet.cpp:137 #: src/slic3r/Utils/FlashAir.cpp:119 src/slic3r/Utils/FlashAir.cpp:140 #: src/slic3r/Utils/FlashAir.cpp:156 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:131 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:134 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model..." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed:" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:73 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:73 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:83 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:89 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:89 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:176 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:181 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:705 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:710 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:713 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/libslic3r/SLA/Pad.cpp:691 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/Zipper.cpp:32 msgid "undefined error" msgstr "" #: src/libslic3r/Zipper.cpp:34 msgid "too many files" msgstr "" #: src/libslic3r/Zipper.cpp:36 msgid "file too large" msgstr "" #: src/libslic3r/Zipper.cpp:38 msgid "unsupported method" msgstr "" #: src/libslic3r/Zipper.cpp:40 msgid "unsupported encryption" msgstr "" #: src/libslic3r/Zipper.cpp:42 msgid "unsupported feature" msgstr "" #: src/libslic3r/Zipper.cpp:44 msgid "failed finding central directory" msgstr "" #: src/libslic3r/Zipper.cpp:46 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/Zipper.cpp:48 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:50 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/Zipper.cpp:52 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:54 msgid "compression failed" msgstr "" #: src/libslic3r/Zipper.cpp:56 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/Zipper.cpp:58 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/Zipper.cpp:60 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/Zipper.cpp:62 msgid "allocation failed" msgstr "" #: src/libslic3r/Zipper.cpp:64 msgid "file open failed" msgstr "" #: src/libslic3r/Zipper.cpp:66 msgid "file create failed" msgstr "" #: src/libslic3r/Zipper.cpp:68 msgid "file write failed" msgstr "" #: src/libslic3r/Zipper.cpp:70 msgid "file read failed" msgstr "" #: src/libslic3r/Zipper.cpp:72 msgid "file close failed" msgstr "" #: src/libslic3r/Zipper.cpp:74 msgid "file seek failed" msgstr "" #: src/libslic3r/Zipper.cpp:76 msgid "file stat failed" msgstr "" #: src/libslic3r/Zipper.cpp:78 msgid "invalid parameter" msgstr "" #: src/libslic3r/Zipper.cpp:80 msgid "invalid filename" msgstr "" #: src/libslic3r/Zipper.cpp:82 msgid "buffer too small" msgstr "" #: src/libslic3r/Zipper.cpp:84 msgid "internal error" msgstr "" #: src/libslic3r/Zipper.cpp:86 msgid "file not found" msgstr "" #: src/libslic3r/Zipper.cpp:88 msgid "archive is too large" msgstr "" #: src/libslic3r/Zipper.cpp:90 msgid "validation failed" msgstr "" #: src/libslic3r/Zipper.cpp:92 msgid "write calledback failed" msgstr "" #: src/libslic3r/Zipper.cpp:102 msgid "Error with zip archive" msgstr "" #: src/libslic3r/GCode.cpp:637 msgid "Empty layers detected, the output would not be printable." msgstr "" #: src/libslic3r/GCode.cpp:638 msgid "Print z" msgstr "" #: src/libslic3r/GCode.cpp:639 msgid "" "This is usually caused by negligibly small extrusions or by a faulty model. " "Try to repair the model or change its orientation on the bed." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:323 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1630 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:934 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Print.cpp:1219 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1222 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1226 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1228 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1237 msgid "The Spiral Vase option can only be used when printing a single object." msgstr "" #: src/libslic3r/Print.cpp:1244 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1257 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:1262 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " "and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1264 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1266 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:1268 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:1270 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:1291 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1293 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1295 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1297 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1339 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:1365 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1374 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1377 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1388 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1396 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1400 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1422 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1427 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1584 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1606 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1614 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1638 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1642 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLAPrint.cpp:613 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:625 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:631 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:646 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:653 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:760 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:43 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:44 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 src/libslic3r/SLAPrintSteps.cpp:356 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:64 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:65 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:190 msgid "Too much overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:199 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:245 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:413 src/libslic3r/SLAPrintSteps.cpp:422 #: src/libslic3r/SLAPrintSteps.cpp:461 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:453 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:621 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:71 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:56 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:61 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:66 msgid "Picture sizes to be stored into a .gcode and .sl1 files" msgstr "" #: src/libslic3r/PrintConfig.cpp:73 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:80 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:81 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:87 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:89 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:97 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:98 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance." msgstr "" #: src/libslic3r/PrintConfig.cpp:104 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:105 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:111 msgid "HTTPS CA File" msgstr "" #: src/libslic3r/PrintConfig.cpp:112 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:118 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:120 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:136 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:137 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:144 src/libslic3r/PrintConfig.cpp:2064 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:145 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:147 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:154 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:164 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:165 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:176 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:177 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:185 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:187 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:193 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:194 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:196 src/libslic3r/PrintConfig.cpp:339 #: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:984 #: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:1201 #: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1403 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:202 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:204 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:207 src/libslic3r/PrintConfig.cpp:780 #: src/libslic3r/PrintConfig.cpp:1640 src/libslic3r/PrintConfig.cpp:1650 #: src/libslic3r/PrintConfig.cpp:1894 src/libslic3r/PrintConfig.cpp:2049 #: src/libslic3r/PrintConfig.cpp:2247 src/libslic3r/PrintConfig.cpp:2727 #: src/libslic3r/PrintConfig.cpp:2848 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:213 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:214 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:215 src/libslic3r/PrintConfig.cpp:792 #: src/libslic3r/PrintConfig.cpp:1219 src/libslic3r/PrintConfig.cpp:1282 #: src/libslic3r/PrintConfig.cpp:1532 src/libslic3r/PrintConfig.cpp:2425 #: src/libslic3r/PrintConfig.cpp:2767 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:222 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:224 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:234 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:236 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:609 #: src/libslic3r/PrintConfig.cpp:617 src/libslic3r/PrintConfig.cpp:626 #: src/libslic3r/PrintConfig.cpp:634 src/libslic3r/PrintConfig.cpp:661 #: src/libslic3r/PrintConfig.cpp:680 src/libslic3r/PrintConfig.cpp:922 #: src/libslic3r/PrintConfig.cpp:1050 src/libslic3r/PrintConfig.cpp:1135 #: src/libslic3r/PrintConfig.cpp:1169 src/libslic3r/PrintConfig.cpp:1181 #: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1241 #: src/libslic3r/PrintConfig.cpp:1300 src/libslic3r/PrintConfig.cpp:1433 #: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1616 #: src/libslic3r/PrintConfig.cpp:2028 src/libslic3r/PrintConfig.cpp:2154 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:244 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:245 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:252 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:253 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:260 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:261 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:271 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:272 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:286 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:287 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:304 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:305 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:313 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:314 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:319 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:320 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:327 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:328 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:336 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:345 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:346 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:352 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:353 src/libslic3r/PrintConfig.cpp:2592 #: src/libslic3r/PrintConfig.cpp:2603 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:359 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:360 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:369 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:371 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:377 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:378 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:386 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:396 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:407 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:409 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:415 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:417 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:843 #: src/libslic3r/PrintConfig.cpp:2009 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:849 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:427 src/libslic3r/PrintConfig.cpp:853 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:428 src/libslic3r/PrintConfig.cpp:854 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:435 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:437 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:457 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:448 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:560 #: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:895 #: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1041 #: src/libslic3r/PrintConfig.cpp:1423 src/libslic3r/PrintConfig.cpp:1761 #: src/libslic3r/PrintConfig.cpp:1883 src/libslic3r/PrintConfig.cpp:1951 #: src/libslic3r/PrintConfig.cpp:2111 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:459 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:904 #: src/libslic3r/PrintConfig.cpp:1720 src/libslic3r/PrintConfig.cpp:1772 #: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/PrintConfig.cpp:2124 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:469 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:471 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:477 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:479 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:489 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:501 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:512 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:522 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:583 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:529 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:530 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:539 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:540 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:545 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:546 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:554 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:556 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:566 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:567 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:572 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:573 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:1708 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:588 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:589 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:597 src/libslic3r/PrintConfig.cpp:1247 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:598 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:607 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:608 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:615 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:616 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:623 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:624 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:632 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:633 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:640 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:641 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:650 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:651 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:659 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:660 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:667 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:668 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:672 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:678 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:679 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:686 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:687 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:694 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:695 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:701 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:702 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:710 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:717 src/libslic3r/PrintConfig.cpp:2503 #: src/libslic3r/PrintConfig.cpp:2504 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:718 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:721 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:726 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:727 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:754 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:755 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:761 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:762 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2587 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:775 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:777 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:789 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:791 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:826 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:828 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:844 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:845 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:846 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:847 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:848 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:2011 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:851 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:852 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:859 src/libslic3r/PrintConfig.cpp:868 #: src/libslic3r/PrintConfig.cpp:876 src/libslic3r/PrintConfig.cpp:910 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:860 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:869 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:878 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:891 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:900 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:901 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:911 msgid "" "Extruder temperature for first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output file." msgstr "" #: src/libslic3r/PrintConfig.cpp:920 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:928 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:929 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:936 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:937 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:960 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:965 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:966 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:973 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:974 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:982 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:990 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:992 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:995 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1001 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1003 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1011 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1021 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1022 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1027 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1029 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1036 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1038 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1049 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1057 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1058 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1071 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1072 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1081 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1092 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1093 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1101 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1102 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1125 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1126 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1127 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1128 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1131 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1132 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1133 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1134 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1142 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1143 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1144 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1145 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1148 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1149 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1150 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1151 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1159 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1160 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1161 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1162 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1165 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1166 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1167 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1168 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1178 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1180 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1188 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1190 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1198 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1200 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1208 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1210 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1217 src/libslic3r/PrintConfig.cpp:1226 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1218 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1227 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1237 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1238 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1248 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1257 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:1269 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1262 src/libslic3r/PrintConfig.cpp:1273 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1268 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1280 src/libslic3r/PrintConfig.cpp:1289 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1281 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1290 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1298 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1299 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1306 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1307 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1316 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1317 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1327 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1332 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1333 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1348 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1349 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1356 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1363 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1364 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1373 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1375 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1381 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1382 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1390 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1391 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1417 #: src/libslic3r/PrintConfig.cpp:1430 src/libslic3r/PrintConfig.cpp:1440 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1400 msgid "" "This is the acceleration your printer will use for perimeters. A high value " "like 9000 usually gives good results if your hardware is up to the job. Set " "zero to disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1408 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1410 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1419 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1432 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1442 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1446 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1454 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1466 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1467 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1472 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1473 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1481 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1482 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1487 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1488 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1501 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1503 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1511 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1512 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1522 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1523 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1529 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1530 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1537 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1538 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1544 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1545 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1547 src/libslic3r/PrintConfig.cpp:1556 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1552 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1553 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1561 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1562 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1569 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1570 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1571 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1578 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1579 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1580 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1588 src/libslic3r/PrintConfig.cpp:1596 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1589 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1597 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1605 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1606 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1612 src/libslic3r/PrintConfig.cpp:1613 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1614 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1621 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1623 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1629 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1639 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1641 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1642 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1649 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1652 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1662 msgid "USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1669 msgid "Serial port speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1670 msgid "Speed (baud) of USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1679 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1680 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1687 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1688 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1695 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1696 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1705 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1706 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1715 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1717 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1727 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1729 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1730 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1736 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1738 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1744 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1746 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1758 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1769 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1781 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1787 src/libslic3r/PrintConfig.cpp:1788 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:1794 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1795 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: src/libslic3r/PrintConfig.cpp:1803 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:1804 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:1814 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:1829 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:1845 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1846 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:1851 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:1852 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1857 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1858 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1865 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1867 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:1871 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:1873 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:1879 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:1881 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1891 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1893 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2676 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1909 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1911 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1918 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1919 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1924 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:1926 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:1931 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1937 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1939 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1948 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1957 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1959 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:1964 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1966 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:1973 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1975 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1982 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1984 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:1993 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2002 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2004 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2010 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2016 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2018 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2027 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2034 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2036 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2042 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2044 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2056 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2058 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2065 msgid "" "Extruder temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:2073 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2075 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2081 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2082 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2094 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {previous_extruder} and " "{next_extruder} can be used. When a tool-changing command which changes to " "the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2107 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2119 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2134 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2135 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2143 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2146 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2153 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2161 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2162 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2168 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2169 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2175 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2176 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2186 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2187 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2193 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2194 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2201 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2207 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2208 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2214 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2215 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2224 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2225 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2231 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2232 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2239 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2245 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2246 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2253 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2254 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2261 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2262 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2268 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2269 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2275 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2277 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2285 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2286 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2353 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2354 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2359 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2360 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2365 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2367 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2373 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2378 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2379 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:2380 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2385 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2386 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:2387 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2392 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2393 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2399 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2400 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2405 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2406 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2407 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2414 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2415 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2416 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2423 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2424 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2431 src/libslic3r/PrintConfig.cpp:2432 #: src/libslic3r/PrintConfig.cpp:2433 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2439 src/libslic3r/PrintConfig.cpp:2440 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2441 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2447 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2449 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2456 src/libslic3r/PrintConfig.cpp:2457 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2458 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2470 src/libslic3r/PrintConfig.cpp:2471 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2482 src/libslic3r/PrintConfig.cpp:2483 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2489 src/libslic3r/PrintConfig.cpp:2490 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:2491 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2496 src/libslic3r/PrintConfig.cpp:2497 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:2498 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:2505 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2512 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2517 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2518 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2526 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2533 src/libslic3r/PrintConfig.cpp:2534 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2542 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2548 src/libslic3r/PrintConfig.cpp:2549 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2556 src/libslic3r/PrintConfig.cpp:2557 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2564 src/libslic3r/PrintConfig.cpp:2565 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2571 src/libslic3r/PrintConfig.cpp:2572 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2578 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2579 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2591 src/libslic3r/PrintConfig.cpp:2602 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2613 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2615 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2620 msgid "Support head front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2622 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2629 msgid "Support head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2631 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2638 msgid "Support head width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2640 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2648 msgid "Support pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2650 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2658 msgid "Support pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2659 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2667 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2668 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2669 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2681 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2683 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2692 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2694 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2702 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2704 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2711 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2714 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2724 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2726 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2734 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2736 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2743 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2745 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2753 msgid "Object elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2755 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:2766 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:2772 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:2774 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2780 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:2782 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:2787 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2789 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2797 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2798 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:2811 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:2812 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:2822 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2824 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2844 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:2846 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2855 msgid "Pad around object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2857 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2862 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:2864 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:2869 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:2871 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:2880 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:2882 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2889 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2891 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2898 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2901 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:2908 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2910 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:2915 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2917 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:2925 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:2927 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:2937 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3320 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:3321 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:3332 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:3333 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:3338 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3339 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3343 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3344 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3348 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:3349 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:3354 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:3359 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:3360 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3365 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3366 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3371 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3372 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3376 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3377 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3381 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3382 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3386 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3387 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3397 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3398 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3403 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3424 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3425 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3429 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3430 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3433 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3434 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3438 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3439 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3442 msgid "Merge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3443 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3448 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3452 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3456 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3457 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3461 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3462 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3467 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3472 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3475 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3476 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3485 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3486 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3489 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3490 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3493 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3494 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3504 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3505 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3508 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3509 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:3515 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3516 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/PrintObject.cpp:108 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:152 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:255 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:395 msgid "Generating support material" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:347 msgid "Height (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:349 msgid "Width (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:351 msgid "Speed (mm/s)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:353 msgid "Fan Speed (%)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:355 msgid "Volumetric flow rate (mm³/s)" msgstr ""