# Print profiles for the Anycubic printers. [vendor] # Vendor name will be shown by the Config Wizard. name = Anycubic # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 0.2.1 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/ # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. [printer_model:AKLP] name = Anycubic Kossel Linear Plus variants = 0.4 technology = FFF family = KOSSEL bed_model = AKLP_Bed.stl bed_texture = AK.svg default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL [printer_model:AK] name = Anycubic Kossel Pulley (Linear) variants = 0.4 technology = FFF family = KOSSEL bed_model = AK_Bed.stl bed_texture = AK.svg default_materials = Generic PLA @AKOSSEL; Generic PETG @AKOSSEL; Generic ABS @AKOSSEL [printer_model:MEGA0] name = Anycubic Mega Zero variants = 0.4 technology = FFF family = MEGA bed_model = mega0_bed.stl bed_texture = mega0.svg default_materials = Generic PLA @MEGA0; Generic PETG @MEGA0; Anycubic PLA @MEGA0; Prusament PLA @MEGA0; Prusament PETG @MEGA0 [printer_model:I3MEGA] name = Anycubic i3 Mega variants = 0.4 technology = FFF family = MEGA bed_model = i3megas_bed.stl bed_texture = i3megas.svg [printer_model:I3MEGAS] name = Anycubic i3 Mega S variants = 0.4 technology = FFF family = MEGA bed_model = i3megas_bed.stl bed_texture = i3megas.svg [printer_model:4MAXPRO20] name = Anycubic 4Max Pro 2.0 variants = 0.4 technology = FFF family = 4Max bed_model = 4MAXPRO20_bed.stl bed_texture = 4MAXPRO20_texture.svg default_materials = Generic PLA @4Max Pro 2.0; Generic TPU @4Max Pro 2.0; Generic ABS @4Max Pro 2.0 [printer_model:PREDATOR] name = Anycubic Predator variants = 0.4; 0.6; 0.8 technology = FFF family = PREDATOR default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @PREDATOR [printer_model:PHOTON MONO] name = Photon Mono variants = default technology = SLA family = PHOTON MONO default_materials = Generic Blue Resin @MONO 0.05 [printer_model:PHOTON MONO X] name = Photon Mono X variants = default technology = SLA family = PHOTON MONO default_materials = Generic Blue Resin @MONO 0.05 [printer_model:PHOTON MONO SE] name = Photon Mono SE variants = default technology = SLA family = PHOTON MONO default_materials = Generic Blue Resin @MONO 0.05 # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. ## Anycubic KOSSEL ## Author: https://github.com/tc0fh ## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4220 # Common print preset [print:*common_akossel*] avoid_crossing_perimeters = 0 bottom_solid_min_thickness = 0.5 bridge_angle = 0 bridge_flow_ratio = 0.8 bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeters_first = 0 external_perimeter_extrusion_width = 0.45 extra_perimeters = 0 extruder_clearance_height = 25 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = grid first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% interface_shells = 0 max_print_speed = 200 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = overhangs = 0 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeters = 2 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 45 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 0 skirts = 2 skirt_distance = 5 skirt_height = 1 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_extruder = 0 support_material_extrusion_width = 0.38 support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 support_material_contact_distance = 0.15 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 top_solid_min_thickness = 0.6 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 140 xy_size_compensation = 0 bridge_acceleration = 1000 default_acceleration = 1500 first_layer_acceleration = 1000 infill_acceleration = 1500 perimeter_acceleration = 800 [print:*0.08mm_akossel*] inherits = *common_akossel* bottom_solid_layers = 10 bridge_acceleration = 300 bridge_flow_ratio = 0.7 bridge_speed = 20 external_perimeter_speed = 20 first_layer_acceleration = 500 gap_fill_speed = 20 infill_acceleration = 800 infill_speed = 40 layer_height = 0.08 max_print_speed = 80 perimeter_acceleration = 300 perimeter_speed = 30 perimeters = 3 small_perimeter_speed = 20 solid_infill_speed = 40 support_material_extrusion_width = 0.3 support_material_spacing = 1.5 support_material_speed = 40 top_solid_infill_speed = 30 top_solid_layers = 12 [print:*0.16mm_akossel*] inherits = *common_akossel* bottom_solid_layers = 5 layer_height = 0.16 top_solid_layers = 6 [print:*0.20mm_akossel*] inherits = *common_akossel* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 layer_height = 0.20 top_solid_layers = 5 [print:*0.24mm_akossel*] inherits = *common_akossel* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 layer_height = 0.24 perimeter_speed = 50 external_perimeter_speed = 35 top_solid_layers = 4 infill_speed = 100 solid_infill_speed = 100 top_solid_infill_speed = 40 [print:*0.30mm_akossel*] inherits = *common_akossel* bottom_solid_layers = 3 bridge_flow_ratio = 0.95 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 35 extrusion_width = 0.5 infill_extrusion_width = 0.5 infill_speed = 70 layer_height = 0.30 perimeter_extrusion_width = 0.5 perimeter_speed = 50 small_perimeter_speed = 30 solid_infill_extrusion_width = 0.5 solid_infill_speed = 70 support_material_speed = 45 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 50 top_solid_layers = 3 [print:0.08mm ULTRADETAIL @AKOSSEL] inherits = *0.08mm_akossel* fill_density = 15% fill_pattern = gyroid compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4 [print:0.16mm QUALITY @AKOSSEL] inherits = *0.16mm_akossel* external_perimeter_speed = 25 fill_density = 15% fill_pattern = gyroid infill_speed = 80 compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4 [print:0.16mm SPEED @AKOSSEL] inherits = *0.16mm_akossel* external_perimeter_speed = 35 infill_speed = 120 perimeter_speed = 60 solid_infill_speed = 120 top_solid_infill_speed = 50 compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4 [print:0.20mm QUALITY @AKOSSEL] inherits = *0.20mm_akossel* external_perimeter_speed = 25 fill_density = 15% fill_pattern = gyroid infill_speed = 80 compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4 [print:0.20mm SPEED @AKOSSEL] inherits = *0.20mm_akossel* external_perimeter_speed = 35 infill_speed = 120 perimeter_speed = 60 solid_infill_speed = 120 top_solid_infill_speed = 50 compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4 [print:0.24mm DRAFT @AKOSSEL] inherits = *0.24mm_akossel* compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4 [print:0.30mm FAST @AKOSSEL] inherits = *0.30mm_akossel* compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ and nozzle_diameter[0]==0.4 # Common filament preset [filament:*common_akossel*] cooling = 0 compatible_printers = extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Anycubic.*/ and printer_notes=~/.*PRINTER_MODEL_AK(|LP).*/ [filament:*PLA_akossel*] inherits = *common_akossel* bed_temperature = 60 fan_below_layer_time = 100 filament_colour = #FF3232 filament_max_volumetric_speed = 10 filament_type = PLA filament_density = 1.24 filament_cost = 20 first_layer_bed_temperature = 60 first_layer_temperature = 200 fan_always_on = 1 cooling = 1 max_fan_speed = 100 min_fan_speed = 100 bridge_fan_speed = 100 disable_fan_first_layers = 1 temperature = 200 [filament:*PET_akossel*] inherits = *common_akossel* bed_temperature = 70 cooling = 1 disable_fan_first_layers = 3 fan_below_layer_time = 20 filament_colour = #FF8000 filament_max_volumetric_speed = 8 filament_type = PETG filament_density = 1.27 filament_cost = 30 first_layer_bed_temperature =70 first_layer_temperature = 240 fan_always_on = 1 max_fan_speed = 50 min_fan_speed = 20 bridge_fan_speed = 100 temperature = 240 [filament:*ABS_akossel*] inherits = *common_akossel* bed_temperature = 100 cooling = 0 disable_fan_first_layers = 3 fan_below_layer_time = 20 filament_colour = #3A80CA filament_max_volumetric_speed = 10 filament_type = ABS filament_density = 1.04 filament_cost = 20 first_layer_bed_temperature = 100 first_layer_temperature = 245 fan_always_on = 0 max_fan_speed = 0 min_fan_speed = 0 bridge_fan_speed = 30 top_fan_speed = 0 temperature = 245 [filament:Generic PLA @AKOSSEL] inherits = *PLA_akossel* filament_vendor = Generic [filament:Generic PETG @AKOSSEL] inherits = *PET_akossel* filament_vendor = Generic [filament:Generic ABS @AKOSSEL] inherits = *ABS_akossel* filament_vendor = Generic # Common printer preset [printer:*common_akossel*] printer_technology = FFF bed_shape = before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z] between_objects_gcode = deretract_speed = 40 extruder_colour = #FFFF00 extruder_offset = 0x0 gcode_flavor = marlin silent_mode = 0 remaining_times = 0 machine_max_acceleration_e = 3000 machine_max_acceleration_extruding = 1000 machine_max_acceleration_retracting = 1000 machine_max_acceleration_x = 1500 machine_max_acceleration_y = 1500 machine_max_acceleration_z = 1500 machine_max_feedrate_e = 60 machine_max_feedrate_x = 200 machine_max_feedrate_y = 200 machine_max_feedrate_z = 200 machine_max_jerk_e = 5 machine_max_jerk_x = 5 machine_max_jerk_y = 5 machine_max_jerk_z = 5 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] max_layer_height = 0.3 min_layer_height = 0.08 max_print_height = 300 nozzle_diameter = 0.4 printer_notes = printer_settings_id = retract_before_travel = 2 retract_before_wipe = 70% retract_layer_change = 1 retract_length = 5 retract_length_toolchange = 1 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 60 single_extruder_multi_material = 0 start_gcode = end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG28 ; home\nM84 ; disable motors toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 default_print_profile = 0.20mm QUALITY @AKOSSEL default_filament_profile = Generic PLA @AKOSSEL [printer:Anycubic Kossel Linear Plus] inherits = *common_akossel* printer_model = AKLP printer_variant = 0.4 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AKLP\nPRINTER_HAS_BOWDEN\n bed_shape = 114.562x10.0229,113.253x19.9695,111.081x29.7642,108.065x39.3323,104.225x48.6011,99.5929x57.5,94.2025x65.9613,88.0951x73.9206,81.3173x81.3173,73.9206x88.0951,65.9613x94.2025,57.5x99.5929,48.6011x104.225,39.3323x108.065,29.7642x111.081,19.9695x113.253,10.0229x114.562,7.04172e-15x115,-10.0229x114.562,-19.9695x113.253,-29.7642x111.081,-39.3323x108.065,-48.6011x104.225,-57.5x99.5929,-65.9613x94.2025,-73.9206x88.0951,-81.3173x81.3173,-88.0951x73.9206,-94.2025x65.9613,-99.5929x57.5,-104.225x48.6011,-108.065x39.3323,-111.081x29.7642,-113.253x19.9695,-114.562x10.0229,-115x1.40834e-14,-114.562x-10.0229,-113.253x-19.9695,-111.081x-29.7642,-108.065x-39.3323,-104.225x-48.6011,-99.5929x-57.5,-94.2025x-65.9613,-88.0951x-73.9206,-81.3173x-81.3173,-73.9206x-88.0951,-65.9613x-94.2025,-57.5x-99.5929,-48.6011x-104.225,-39.3323x-108.065,-29.7642x-111.081,-19.9695x-113.253,-10.0229x-114.562,-2.11252e-14x-115,10.0229x-114.562,19.9695x-113.253,29.7642x-111.081,39.3323x-108.065,48.6011x-104.225,57.5x-99.5929,65.9613x-94.2025,73.9206x-88.0951,81.3173x-81.3173,88.0951x-73.9206,94.2025x-65.9613,99.5929x-57.5,104.225x-48.6011,108.065x-39.3323,111.081x-29.7642,113.253x-19.9695,114.562x-10.0229,115x-2.81669e-14 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-54.672 Y95.203 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-52.931 Y96.185 E0.300\nG1 X-50.985 Y97.231 E0.331\nG1 X-49.018 Y98.238 E0.331\nG1 X-47.032 Y99.205 E0.331\nG1 X-45.026 Y100.132 E0.331\nG1 X-43.003 Y101.019 E0.331\nG1 X-40.961 Y101.864 E0.331\nG1 X-38.904 Y102.668 E0.331\nG1 X-36.83 Y103.431 E0.331\nG1 X-34.742 Y104.152 E0.331\nG1 X-32.639 Y104.83 E0.331\nG1 X-30.523 Y105.466 E0.331\nG1 X-28.395 Y106.06 E0.331\nG1 X-26.255 Y106.61 E0.331\nG1 X-24.105 Y107.117 E0.331\nG1 X-21.945 Y107.581 E0.331\nG1 X-19.776 Y108.001 E0.331\nG1 X-17.599 Y108.377 E0.331\nG1 X-15.415 Y108.71 E0.331\nG1 X-13.224 Y108.998 E0.331\nG1 X-11.028 Y109.242 E0.331\nG1 X-8.828 Y109.442 E0.331\nG1 X-6.624 Y109.598 E0.331\nG1 X-4.418 Y109.709 E0.331\nG1 X-2.209 Y109.776 E0.332\nG1 X0 Y109.798 E0.331\nG1 X2.209 Y109.776 E0.690\nG1 X4.418 Y109.709 E0.691\nG1 X6.624 Y109.598 E0.690\nG1 X8.828 Y109.442 E0.690\nG1 X11.028 Y109.242 E0.690\nG1 X13.224 Y108.998 E0.690\nG1 X15.415 Y108.71 E0.691\nG1 X17.599 Y108.377 E0.690\nG1 X19.776 Y108.001 E0.690\nG1 X21.945 Y107.581 E0.690\nG1 X24.105 Y107.117 E0.690\nG1 X26.255 Y106.61 E0.690\nG1 X28.395 Y106.06 E0.690\nG1 X30.523 Y105.466 E0.690\nG1 X32.639 Y104.83 E0.690\nG1 X34.742 Y104.152 E0.690\nG1 X36.83 Y103.431 E0.690\nG1 X38.904 Y102.668 E0.691\nG1 X40.961 Y101.864 E0.690\nG1 X43.003 Y101.019 E0.691\nG1 X45.026 Y100.132 E0.690\nG1 X47.032 Y99.205 E0.691\nG1 X49.018 Y98.238 E0.690\nG1 X50.985 Y97.231 E0.691\nG1 X52.931 Y96.185 E0.690\nG1 X54.672 Y95.203 E0.625\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y96.185 F1000 ; wipe\nG1 X50.985 Y97.231 F1000 ; wipe\nG1 X49.018 Y98.238 F1000 ; wipe\nG1 X0 Y109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:Anycubic Kossel Pulley (Linear)] inherits = *common_akossel* printer_model = AK printer_variant = 0.4 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AK\nPRINTER_HAS_BOWDEN\n bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-39.672 Y69.712 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-38.457 Y70.397 E0.209\nG1 X-37.043 Y71.157 E0.241\nG1 X-35.614 Y71.889 E0.241\nG1 X-34.171 Y72.591 E0.241\nG1 X-32.714 Y73.265 E0.241\nG1 X-31.244 Y73.909 E0.241\nG1 X-29.761 Y74.523 E0.241\nG1 X-28.266 Y75.108 E0.241\nG1 X-26.759 Y75.662 E0.241\nG1 X-25.242 Y76.185 E0.241\nG1 X-23.714 Y76.678 E0.241\nG1 X-22.177 Y77.14 E0.241\nG1 X-20.63 Y77.571 E0.241\nG1 X-19.076 Y77.971 E0.241\nG1 X-17.514 Y78.34 E0.241\nG1 X-15.944 Y78.677 E0.241\nG1 X-14.368 Y78.982 E0.241\nG1 X-12.786 Y79.255 E0.241\nG1 X-11.199 Y79.497 E0.241\nG1 X-9.608 Y79.706 E0.241\nG1 X-8.013 Y79.884 E0.241\nG1 X-6.414 Y80.029 E0.241\nG1 X-4.813 Y80.142 E0.241\nG1 X-3.21 Y80.223 E0.241\nG1 X-1.605 Y80.271 E0.241\nG1 X0 Y80.287 E0.241\nG1 X1.605 Y80.271 E0.502\nG1 X3.21 Y80.223 E0.502\nG1 X4.813 Y80.142 E0.502\nG1 X6.414 Y80.029 E0.502\nG1 X8.013 Y79.884 E0.502\nG1 X9.608 Y79.706 E0.502\nG1 X11.199 Y79.497 E0.501\nG1 X12.786 Y79.255 E0.502\nG1 X14.368 Y78.982 E0.502\nG1 X15.944 Y78.677 E0.502\nG1 X17.514 Y78.34 E0.502\nG1 X19.076 Y77.971 E0.502\nG1 X20.63 Y77.571 E0.501\nG1 X22.177 Y77.14 E0.502\nG1 X23.714 Y76.678 E0.502\nG1 X25.242 Y76.185 E0.502\nG1 X26.759 Y75.662 E0.501\nG1 X28.266 Y75.108 E0.502\nG1 X29.761 Y74.523 E0.502\nG1 X31.244 Y73.909 E0.502\nG1 X32.714 Y73.265 E0.502\nG1 X34.171 Y72.591 E0.502\nG1 X35.614 Y71.889 E0.501\nG1 X37.043 Y71.157 E0.502\nG1 X38.457 Y70.397 E0.502\nG1 X39.672 Y69.712 E0.436\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} ## Anycubic MEGA ZERO ## Author: https://github.com/kad ## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4057 # Common print preset [print:*common_mega0*] avoid_crossing_perimeters = 1 bridge_angle = 0 bridge_flow_ratio = 0.7 bridge_speed = 25 brim_width = 0 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeters_first = 0 external_perimeter_extrusion_width = 0.45 extra_perimeters = 0 extruder_clearance_height = 25 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = grid first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 30 gcode_comments = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% interface_shells = 0 max_print_speed = 100 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = overhangs = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeters = 2 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 1 skirts = 2 skirt_distance = 2 skirt_height = 2 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_extruder = 0 support_material_extrusion_width = 0.4 support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 support_material_contact_distance = 0.15 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 40 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 40 travel_speed = 100 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 140 xy_size_compensation = 0 [print:*0.10mm_mega0*] inherits = *common_mega0* perimeter_speed = 40 external_perimeter_speed = 25 infill_speed = 50 solid_infill_speed = 40 layer_height = 0.10 perimeters = 3 top_infill_extrusion_width = 0.4 bottom_solid_layers = 6 top_solid_layers = 7 [print:*0.20mm_mega0*] inherits = *common_mega0* perimeter_speed = 40 external_perimeter_speed = 25 infill_speed = 50 solid_infill_speed = 40 layer_height = 0.20 top_infill_extrusion_width = 0.4 bottom_solid_layers = 4 top_solid_layers = 5 [print:*0.30mm_mega0*] inherits = *common_mega0* perimeter_speed = 40 external_perimeter_speed = 25 infill_speed = 50 solid_infill_speed = 40 layer_height = 0.24 top_infill_extrusion_width = 0.45 bottom_solid_layers = 3 top_solid_layers = 4 [print:0.10mm DETAIL @MEGA0] inherits = *0.10mm_mega0* travel_speed = 120 infill_speed = 50 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="MEGA0" and nozzle_diameter[0]==0.4 [print:0.20mm NORMAL @MEGA0] inherits = *0.20mm_mega0* travel_speed = 120 infill_speed = 50 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="MEGA0" and nozzle_diameter[0]==0.4 [print:0.30mm DRAFT @MEGA0] inherits = *0.30mm_mega0* travel_speed = 120 infill_speed = 50 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_extrusion_width = 0.38 compatible_printers_condition = printer_model=="MEGA0" and nozzle_diameter[0]==0.4 # Common filament preset [filament:*common_mega0*] cooling = 0 compatible_printers = extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = printer_model=="MEGA0" [filament:*PLA_mega0*] inherits = *common_mega0* bed_temperature = 40 fan_below_layer_time = 100 filament_colour = #FF3232 filament_max_volumetric_speed = 15 filament_type = PLA filament_density = 1.24 filament_cost = 20 first_layer_bed_temperature = 40 first_layer_temperature = 215 fan_always_on = 1 cooling = 1 max_fan_speed = 100 min_fan_speed = 100 bridge_fan_speed = 100 disable_fan_first_layers = 1 temperature = 210 [filament:*PET_mega0*] inherits = *common_mega0* bed_temperature = 70 cooling = 1 disable_fan_first_layers = 3 fan_below_layer_time = 20 filament_colour = #FF8000 filament_max_volumetric_speed = 8 filament_type = PETG filament_density = 1.27 filament_cost = 30 first_layer_bed_temperature =70 first_layer_temperature = 240 fan_always_on = 1 max_fan_speed = 50 min_fan_speed = 20 bridge_fan_speed = 100 temperature = 240 [filament:*ABS_mega0*] inherits = *common_mega0* bed_temperature = 100 cooling = 0 disable_fan_first_layers = 3 fan_below_layer_time = 20 filament_colour = #3A80CA filament_max_volumetric_speed = 11 filament_type = ABS filament_density = 1.04 filament_cost = 20 first_layer_bed_temperature = 100 first_layer_temperature = 245 fan_always_on = 0 max_fan_speed = 0 min_fan_speed = 0 bridge_fan_speed = 30 top_fan_speed = 0 temperature = 245 [filament:Generic PLA @MEGA0] inherits = *PLA_mega0* filament_vendor = Generic [filament:Generic PETG @MEGA0] inherits = *PET_mega0* filament_vendor = Generic [filament:Generic ABS @MEGA0] inherits = *ABS_mega0* filament_vendor = Generic [filament:Anycubic PLA @MEGA0] inherits = *PLA_mega0* filament_vendor = Anycubic temperature = 190 first_layer_temperature = 195 filament_cost = 24.99 filament_density = 1.25 [filament:Prusament PLA @MEGA0] inherits = *PLA_mega0* filament_vendor = Prusa Polymers temperature = 215 bed_temperature = 40 first_layer_temperature = 215 filament_cost = 24.99 filament_density = 1.24 [filament:Prusament PETG @MEGA0] inherits = *PET_mega0* filament_vendor = Prusa Polymers temperature = 245 bed_temperature = 70 first_layer_temperature = 245 filament_cost = 24.99 filament_density = 1.27 [filament:VOXELPLA PLUS @MEGA0] inherits = *PLA_mega0* filament_vendor = VOXELPLA temperature = 200 bed_temperature = 55 first_layer_temperature = 200 first_layer_bed_temperature = 55 filament_cost = 16.99 filament_density = 1.24 filament_colour = #FF4640 # Common printer preset [printer:*common_mega0*] printer_technology = FFF bed_shape = 0x0,220x0,220x220,0x220 before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm\nG92 E0 between_objects_gcode = deretract_speed = 0 extruder_colour = #FFFF00 extruder_offset = 0x0 gcode_flavor = marlin silent_mode = 0 remaining_times = 0 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 3000 machine_max_acceleration_y = 3000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 20 machine_max_jerk_y = 20 machine_max_jerk_z = 0.4 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm max_layer_height = 0.3 min_layer_height = 0.1 max_print_height = 200 nozzle_diameter = 0.4 printer_notes = printer_settings_id = retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 6 retract_length_toolchange = 1 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 single_extruder_multi_material = 0 start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 printer_model = default_print_profile = default_filament_profile = [printer:Anycubic Mega Zero] inherits = *common_mega0* printer_model = MEGA0 printer_variant = 0.4 max_layer_height = 0.3 min_layer_height = 0.1 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_MEGA0 bed_shape = 0x0,220x0,220x220,0x220 max_print_height = 250 machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 500 machine_max_acceleration_retracting = 500 machine_max_acceleration_x = 500 machine_max_acceleration_y = 500 machine_max_acceleration_z = 100 machine_max_feedrate_e = 25 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 5 machine_max_jerk_e = 5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.4 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 nozzle_diameter = 0.4 retract_before_travel = 2 retract_layer_change = 0 retract_length = 7 retract_speed = 30 retract_lift = 0.2 deretract_speed = 30 retract_before_wipe = 70% default_print_profile = 0.20mm NORMAL @MEGA0 default_filament_profile = Anycubic PLA @MEGA0 start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n ## Anycubic i3 Mega and i3 Mega S ## Author: https://github.com/Igami ## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4619 [print:*common_mega*] bottom_solid_min_thickness = 0.5 bridge_acceleration = 1000 bridge_flow_ratio = 0.95 bridge_speed = 25 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ and nozzle_diameter[0]==0.4 default_acceleration = 1000 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 40 extruder_clearance_height = 35 extruder_clearance_radius = 60 extrusion_width = 0.45 fill_density = 15% fill_pattern = gyroid first_layer_acceleration = 800 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 1 infill_acceleration = 1000 infill_anchor = 2.5 infill_anchor_max = 12 infill_extrusion_width = 0.45 max_print_speed = 100 min_skirt_length = 4 only_retract_when_crossing_perimeters = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeter_acceleration = 800 perimeter_extrusion_width = 0.45 perimeter_speed = 50 perimeters = 2 seam_position = nearest skirt_distance = 2 skirt_height = 3 skirts = 1 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_extrusion_width = 0.45 solid_infill_speed = 50 support_material = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.1 support_material_extrusion_width = 0.35 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 80% support_material_spacing = 2 support_material_speed = 50 support_material_threshold = 50 support_material_xy_spacing = 60% thin_walls = 0 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 top_solid_min_thickness = 0.7 travel_speed = 180 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.15mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.15mm_mega*] inherits = *common_mega* bottom_solid_layers = 5 bridge_flow_ratio = 1 infill_speed = 60 layer_height = 0.15 top_solid_layers = 7 [print:0.15mm QUALITY @MEGA] inherits = *0.15mm_mega* # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.20mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.20mm_mega*] inherits = *common_mega* bottom_solid_layers = 4 infill_speed = 60 layer_height = 0.2 top_solid_layers = 5 [print:0.20mm QUALITY @MEGA] inherits = *0.20mm_mega* # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.30mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.30mm_mega*] inherits = *common_mega* bottom_solid_layers = 4 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 35 extrusion_width = 0.5 fill_pattern = cubic infill_extrusion_width = 0.5 infill_speed = 85 layer_height = 0.3 perimeter_extrusion_width = 0.5 small_perimeter_speed = 30 solid_infill_extrusion_width = 0.5 support_material_extrusion_width = 0.38 support_material_speed = 45 top_solid_layers = 4 [print:0.30mm DRAFT @MEGA] inherits = *0.30mm_mega* # XXXXXXXXXXXXXXXXXXXXXX # XXX--- filament ---XXX # XXXXXXXXXXXXXXXXXXXXXX [filament:*common_mega*] compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ end_filament_gcode = "; Filament-specific end gcode" fan_always_on = 1 fan_below_layer_time = 100 filament_vendor = Generic min_print_speed = 15 slowdown_below_layer_time = 20 [filament:*ABS_mega*] inherits = *common_mega* bed_temperature = 110 bridge_fan_speed = 25 cooling = 0 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #3A80CA filament_cost = 27.82 filament_density = 1.04 filament_max_volumetric_speed = 11 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_type = ABS first_layer_bed_temperature = 105 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 20 temperature = 255 [filament:Generic ABS @MEGA] inherits = *ABS_mega* [filament:*FLEX_mega*] inherits = *common_mega* bed_temperature = 50 bridge_fan_speed = 80 cooling = 0 extrusion_multiplier = 1.15 fan_always_on = 0 filament_colour = #008000 filament_cost = 82.00 filament_density = 1.22 filament_deretract_speed = 25 filament_max_volumetric_speed = 1.2 filament_retract_length = 0.8 filament_type = FLEX first_layer_bed_temperature = 55 first_layer_temperature = 240 max_fan_speed = 90 min_fan_speed = 70 temperature = 240 [filament:Generic FLEX @MEGA] inherits = *FLEX_mega* [filament:SainSmart TPU @MEGA] inherits = *FLEX_mega* filament_vendor = SainSmart bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 4 filament_cost = 39.99 filament_density = 1.21 filament_deretract_speed = 15 filament_max_volumetric_speed = 1.8 filament_notes = "SainSmart TPU gains popularity among 3D Printing community for its balance of rigidity and flexibility. In addition, with a 95A Shore Hardness and improved bed adhesion, it is easier to print even with a stock elementary 3D Printer like the Creality Ender 3. SainSmart TPU will not disappoint if you are looking for flexible filament. From drone parts, phone cases, to small toys, all can be printed with ease.\n\nhttps://www.sainsmart.com/collections/tpu-filament/products/all-colors-tpu-flexible-filament-1-75mm-0-8kg-1-76lb" filament_retract_before_travel = 5 filament_retract_length = 4 filament_retract_speed = 40 filament_unloading_speed = 90 first_layer_bed_temperature = 55 first_layer_temperature = 235 full_fan_speed_layer = 6 max_fan_speed = 80 min_fan_speed = 80 slowdown_below_layer_time = 10 temperature = 235 [filament:*PETG_mega*] inherits = *common_mega* bed_temperature = 90 bridge_fan_speed = 50 fan_below_layer_time = 20 filament_colour = #FF8000 filament_cost = 27.82 filament_density = 1.27 filament_max_volumetric_speed = 8 filament_type = PETG first_layer_bed_temperature = 90 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 temperature = 240 [filament:Eolas Prints PLA @MEGA] inherits = *PLA_mega* filament_vendor = Eolas Prints filament_cost = 23.50 filament_density = 1.24 filament_spool_weight = 0 filament_colour = #4D9398 first_layer_bed_temperature = 65 first_layer_temperature = 212 temperature = 208 bed_temperature = 60 [filament:Eolas Prints PLA Matte @MEGA] inherits = Eolas Prints PLA @MEGA filament_cost = 25.50 filament_max_volumetric_speed = 14 temperature = 212 [filament:Eolas Prints INGEO 850 @MEGA] inherits = Eolas Prints PLA @MEGA filament_cost = 25.90 temperature = 210 [filament:Eolas Prints INGEO 870 @MEGA] inherits = Eolas Prints PLA @MEGA filament_cost = 25.90 temperature = 215 first_layer_bed_temperature = 68 first_layer_temperature = 220 bed_temperature = 65 [filament:Eolas Prints PETG @MEGA] inherits = *PETG_mega* filament_vendor = Eolas Prints filament_cost = 29.90 filament_density = 1.27 filament_spool_weight = 0 filament_colour = #4D9398 temperature = 240 first_layer_bed_temperature = 85 first_layer_temperature = 235 bed_temperature = 90 [filament:Eolas Prints PETG - UV Resistant @MEGA] inherits = Eolas Prints PETG @MEGA filament_cost = 35.90 temperature = 242 first_layer_temperature = 237 [filament:Eolas Prints TPU 93A @MEGA] inherits = *FLEX_mega* filament_vendor = Eolas Prints filament_cost = 34.99 filament_density = 1.21 filament_colour = #4D9398 filament_max_volumetric_speed = 1.2 temperature = 235 first_layer_bed_temperature = 30 bed_temperature = 30 filament_retract_length = 0 extrusion_multiplier = 1.16 [filament:Generic PETG @MEGA] inherits = *PETG_mega* [filament:ColorFabb XT-CF20 @MEGA] inherits = *PETG_mega* compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ extrusion_multiplier = 1.05 filament_colour = #804040 filament_cost = 66.60 filament_density = 1.35 filament_deretract_speed = 25 filament_max_volumetric_speed = 2 filament_notes = "Based on colorFabb_XT, XT-CF20 is a carbon fiber composite material. Loaded with no less than 20% specially sourced carbon fibers we have developed a very stiff and tough 3D printing filament made for functional parts. It is truly a professional printers go-to material, especially for users looking for high melt strength, high melt viscosity and good dimensional accuracy and stability.\n\nhttps://colorfabb.com/xt-cf20" filament_retract_before_travel = 1 filament_retract_length = 1.4 filament_retract_speed = 40 filament_spool_weight = 236 filament_vendor = ColorFabb first_layer_temperature = 260 full_fan_speed_layer = 5 slowdown_below_layer_time = 15 temperature = 260 [filament:ERYONE PETG @MEGA] inherits = *PETG_mega* filament_vendor = ERYONE filament_cost = 20.99 filament_notes = "https://eryone.com/petg/show/10.html" [filament:FormFutura HDglass @MEGA] inherits = *PETG_mega* filament_vendor = FormFutura filament_cost = 46.65 filament_notes = "HDglass is a high performance PETG type of 3D printer with unsurpassed 3D printing properties and improved mechanical strength, flexibility, toughness and heat resistance.\n\nhttps://www.formfutura.com/shop/product/hdglass-2812" [filament:FormFutura ReForm rPET @MEGA] inherits = *PETG_mega* filament_vendor = FormFutura filament_cost = 26.65 filament_notes = "ReForm rPET is a recycled PETG type of 3D printer filament that is made from post-industrial waste streams of a nearby located plastic bottle manufacturer.\n\nhttps://www.formfutura.com/shop/product/reform-rpet-2836" filament_spool_weight = 176 [filament:Janbex transparent PETG @MEGA] inherits = *PETG_mega* filament_vendor = Janbex filament_cost = 31.99 filament_spool_weight = 222 first_layer_temperature = 215 min_fan_speed = 100 temperature = 210 [filament:DAS FILAMENT PETG @MEGA] inherits = *PETG_mega* filament_vendor = DAS FILAMENT bed_temperature = 75 first_layer_bed_temperature = 75 first_layer_temperature = 220 temperature = 225 [filament:*PLA_mega*] inherits = *common_mega* bed_temperature = 60 disable_fan_first_layers = 1 filament_colour = #FF3232 filament_cost = 25.40 filament_density = 1.24 filament_max_volumetric_speed = 10 first_layer_bed_temperature = 65 first_layer_temperature = 215 min_fan_speed = 100 temperature = 210 [filament:Generic PLA @MEGA] inherits = *PLA_mega* [filament:3Dmensionals PLA @MEGA] inherits = *PLA_mega* filament_vendor = 3Dmensionals filament_cost = 22.90 filament_notes = "Das 3DFilaments - PLA von 3Dmensionals ist ein sehr leicht zu druckendes 3D-Drucker Filament. Dabei handelt es sich um ein etwas härteres PLA mit einer exzellenten thermischen Stabilität. Das Filament zeichnet sich vor allem durch verzugfreies 3D-Drucken aus und weist minimale bis keine Verformung nach dem Abkühlen auf. Daher ist es besonders gut für den Druck größerer Objekte geeignet. Zudem bietet 3DFilaments - PLA über die gesamte Fadenläge eine hervorragende Durchmesser- und Rundheitstoleranz.\n\nhttps://www.3dmensionals.de/3dfilaments?number=PSU3DM001V" [filament:3D Warhorse PLA @MEGA] inherits = *PLA_mega* filament_vendor = 3D Warhorse filament_cost = 19.99 [filament:AMOLEN wood PLA] inherits = *PLA_mega* filament_vendor = AMOLEN compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ extrusion_multiplier = 1.1 filament_colour = #DFC287 filament_cost = 33.99 filament_density = 1.23 filament_max_volumetric_speed = 9 filament_notes = "https://amolen.com/collections/wood/products/amolen-pla-filament-1-75mm-wood-color-3d-printer-filament-1kg2-2lb" [filament:FormFutura EasyFil PLA @MEGA] inherits = *PLA_mega* filament_vendor = FormFutura filament_cost = 39.93 filament_notes = "EasyFil PLA is an easy to print PLA type of 3D printer filament that is available in a wide variety of colors. Its improved flowing behavior make 3D printed layers flow more into each other.\n\nhttps://www.formfutura.com/shop/product/easyfil-pla-2801" [filament:FormFutura ReForm rPLA @MEGA] inherits = *PLA_mega* filament_vendor = FormFutura filament_cost = 26.65 filament_notes = "ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.\n\nhttps://www.formfutura.com/shop/product/reform-rpla-2838" [filament:GIANTARM PLA @MEGA] inherits = *PLA_mega* filament_vendor = GIANTARM filament_cost = 24.99 [filament:Prusament PLA @MEGA] inherits = *PLA_mega* filament_vendor = Prusa Polymers filament_cost = 30.24 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" filament_spool_weight = 201 temperature = 215 [filament:Verbatim PLA @MEGA] inherits = *PLA_mega* filament_vendor = Verbatim filament_cost = 23.88 [filament:VOXELPLA PLUS @MEGA] inherits = *PLA_mega* filament_vendor = VOXELPLA temperature = 200 bed_temperature = 55 first_layer_temperature = 200 first_layer_bed_temperature = 55 filament_cost = 16.99 filament_density = 1.24 filament_colour = #FF4640 [printer:*common_mega*] printer_technology = FFF bed_shape = 0x0,210x0,210x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z] default_filament_profile = Generic PLA @MEGA default_print_profile = 0.15mm QUALITY @MEGA deretract_speed = 50 end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors extruder_colour = #808080 gcode_flavor = marlin layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] max_layer_height = 0.36 max_print_height = 205 remaining_times = 1 retract_before_travel = 1.5 retract_before_wipe = 60% retract_layer_change = 1 retract_length = 6 retract_lift = 0.075 retract_lift_below = 204 retract_speed = 40 silent_mode = 0 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0 thumbnails = 16x16,220x124 use_relative_e_distances = 1 wipe = 1 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 1250 machine_max_acceleration_retracting = 1250 machine_max_acceleration_x = 3000 machine_max_acceleration_y = 2000 machine_max_acceleration_z = 60 machine_max_feedrate_e = 60 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 6 machine_max_jerk_e = 5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.4 [printer:Anycubic i3 Mega] inherits = *common_mega* printer_model = I3MEGA printer_variant = 0.4 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA\nPRINTER_HAS_BOWDEN [printer:Anycubic i3 Mega S] inherits = *common_mega* printer_model = I3MEGAS printer_variant = 0.4 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN machine_max_feedrate_e = 30 machine_max_feedrate_z = 8 ## Anycubic PREDATOR ## Author: https://github.com/tillverka3d ## Initial PR: https://github.com/prusa3d/PrusaSlicer/pull/4960 ######################################### ###### begin common print presets ####### ######################################### # Common print preset [print:*common predator*] spiral_vase = 0 top_solid_min_thickness = 0.8 bottom_solid_min_thickness = 0.6 extra_perimeters = 0 ensure_vertical_shell_thickness = 1 avoid_crossing_perimeters = 0 thin_walls = 0 overhangs = 1 seam_position = nearest external_perimeters_first = 0 fill_density = 20% external_fill_pattern = rectilinear infill_every_layers = 1 infill_only_where_needed = 0 solid_infill_every_layers = 0 fill_angle = 45 solid_infill_below_area = 20 bridge_angle = 0 only_retract_when_crossing_perimeters = 0 infill_first = 0 skirts = 1 skirt_distance = 4 skirt_height = 1 min_skirt_length = 8 brim_width = 0 support_material = 0 support_material_auto = 1 support_material_threshold = 50 support_material_enforce_layers = 0 raft_layers = 0 support_material_contact_distance = 0.1 support_material_pattern = rectilinear support_material_with_sheath = 0 support_material_spacing = 2 support_material_angle = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_contact_loops = 0 support_material_buildplate_only = 0 support_material_xy_spacing = 60% dont_support_bridges = 1 support_material_synchronize_layers = 0 travel_speed = 94 first_layer_speed = 15 perimeter_acceleration = 0 infill_acceleration = 0 bridge_acceleration = 0 first_layer_acceleration = 0 default_acceleration = 0 max_volumetric_speed = 15 perimeter_extruder = 1 infill_extruder = 1 solid_infill_extruder = 1 support_material_extruder = 0 support_material_interface_extruder = 0 ooze_prevention = 0 standby_temperature_delta = -5 wipe_tower = 0 wipe_tower_x = 170 wipe_tower_y = 140 wipe_tower_width = 60 wipe_tower_rotation_angle = 0 wipe_tower_bridging = 10 interface_shells = 0 bridge_flow_ratio = 0.8 resolution = 0 xy_size_compensation = 0 elefant_foot_compensation = 0.2 clip_multipart_objects = 1 complete_objects = 0 extruder_clearance_radius = 45 extruder_clearance_height = 25 gcode_comments = 0 output_filename_format = {input_filename_base}.gcode post_process = notes = max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 print_settings_id = # Common print preset [print:*common predator 0.4 nozzle*] inherits = *common predator* first_layer_height = 0.16 infill_overlap = 25% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_PREDATOR.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/ and nozzle_diameter[0]==0.4 # Common print preset [print:*common predator 0.6 nozzle*] inherits = *common predator* first_layer_height = 0.24 infill_overlap = 27% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_PREDATOR.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/ and nozzle_diameter[0]==0.6 # Common print preset [print:*common predator 0.8 nozzle*] inherits = *common predator* first_layer_height = 0.32 infill_overlap = 30% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_PREDATOR.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/ and nozzle_diameter[0]==0.8 # Common print preset [print:*common predator quality*] perimeter_speed = 50 small_perimeter_speed = 15 external_perimeter_speed = 70% infill_speed = 65 solid_infill_speed = 85% top_solid_infill_speed = 85% support_material_speed = 30 support_material_interface_speed = 85% bridge_speed = 30 gap_fill_speed = 40 ironing_speed = 15 # Common print preset [print:*common predator speed*] perimeter_speed = 70 small_perimeter_speed = 15 external_perimeter_speed = 70% infill_speed = 85 solid_infill_speed = 85% top_solid_infill_speed = 85% support_material_speed = 30 support_material_interface_speed = 85% bridge_speed = 30 gap_fill_speed = 40 ironing_speed = 15 # Common print preset [print:*common predator 0.4 nozzle detailed*] inherits = *common predator 0.4 nozzle* extrusion_width = 0.42 first_layer_extrusion_width = 0.41 perimeter_extrusion_width = 0.42 external_perimeter_extrusion_width = 0.42 infill_extrusion_width = 0.4 solid_infill_extrusion_width = 0.4 top_infill_extrusion_width = 0.4 support_material_extrusion_width = 0.38 # Common print preset [print:*common predator 0.4 nozzle coarse*] inherits = *common predator 0.4 nozzle* extrusion_width = 0.44 first_layer_extrusion_width = 0.42 perimeter_extrusion_width = 0.5 external_perimeter_extrusion_width = 0.5 infill_extrusion_width = 0.5 solid_infill_extrusion_width = 0.5 top_infill_extrusion_width = 0.4 support_material_extrusion_width = 0.38 # Common print preset [print:*common predator 0.6 nozzle detailed*] inherits = *common predator 0.6 nozzle* extrusion_width = 0.64 first_layer_extrusion_width = 0.62 perimeter_extrusion_width = 0.64 external_perimeter_extrusion_width = 0.64 infill_extrusion_width = 0.6 solid_infill_extrusion_width = 0.6 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.56 # Common print preset [print:*common predator 0.6 nozzle coarse*] inherits = *common predator 0.6 nozzle* extrusion_width = 0.67 first_layer_extrusion_width = 0.64 perimeter_extrusion_width = 0.7 external_perimeter_extrusion_width = 0.7 infill_extrusion_width = 0.7 solid_infill_extrusion_width = 0.7 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.56 # Common print preset [print:*common predator 0.8 nozzle detailed*] inherits = *common predator 0.8 nozzle* extrusion_width = 0.84 first_layer_extrusion_width = 0.82 perimeter_extrusion_width = 0.84 external_perimeter_extrusion_width = 0.84 infill_extrusion_width = 0.8 solid_infill_extrusion_width = 0.8 top_infill_extrusion_width = 0.8 support_material_extrusion_width = 0.72 # Common print preset [print:*common predator 0.8 nozzle coarse*] inherits = *common predator 0.8 nozzle* extrusion_width = 0.87 first_layer_extrusion_width = 0.84 perimeter_extrusion_width = 0.9 external_perimeter_extrusion_width = 0.9 infill_extrusion_width = 0.9 solid_infill_extrusion_width = 0.9 top_infill_extrusion_width = 0.8 support_material_extrusion_width = 0.72 ######################################### ####### end common print presets ######## ######################################### ######################################### ########## begin print presets ########## ######################################### [print:0.08mm 0.4 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.4 nozzle detailed*; *common predator quality* layer_height = 0.08 max_print_speed = 50 perimeters = 3 fill_pattern = grid [print:0.16mm 0.4 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.4 nozzle detailed*; *common predator quality* layer_height = 0.16 max_print_speed = 60 perimeters = 3 fill_pattern = grid [print:0.16mm 0.4 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.4 nozzle coarse*; *common predator quality* layer_height = 0.16 max_print_speed = 60 perimeters = 3 fill_pattern = grid [print:0.24mm 0.4 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.4 nozzle detailed*; *common predator quality* layer_height = 0.24 max_print_speed = 70 perimeters = 3 fill_pattern = grid [print:0.24mm 0.4 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.4 nozzle coarse*; *common predator quality* layer_height = 0.24 max_print_speed = 70 perimeters = 3 fill_pattern = grid [print:0.32mm 0.4 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.4 nozzle detailed*; *common predator quality* layer_height = 0.32 max_print_speed = 70 perimeters = 3 fill_pattern = grid [print:0.32mm 0.4 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.4 nozzle coarse*; *common predator quality* layer_height = 0.32 max_print_speed = 70 perimeters = 3 fill_pattern = grid [print:0.16mm 0.6 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator quality* layer_height = 0.16 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.16mm 0.6 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator speed* layer_height = 0.16 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.16mm 0.6 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator quality* layer_height = 0.16 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.16mm 0.6 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator speed* layer_height = 0.16 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.6 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator quality* layer_height = 0.24 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.6 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator speed* layer_height = 0.24 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.6 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator quality* layer_height = 0.24 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.6 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator speed* layer_height = 0.24 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.6 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator quality* layer_height = 0.32 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.6 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator speed* layer_height = 0.32 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.6 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator quality* layer_height = 0.32 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.6 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator speed* layer_height = 0.32 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.6 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator quality* layer_height = 0.4 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.6 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.6 nozzle detailed*; *common predator speed* layer_height = 0.4 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.6 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator quality* layer_height = 0.4 max_print_speed = 70 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.6 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.6 nozzle coarse*; *common predator speed* layer_height = 0.4 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.8 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator quality* layer_height = 0.24 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.8 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator speed* layer_height = 0.24 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.8 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator quality* layer_height = 0.24 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.24mm 0.8 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator speed* layer_height = 0.24 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.8 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator quality* layer_height = 0.32 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.8 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator speed* layer_height = 0.32 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.8 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator quality* layer_height = 0.32 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.32mm 0.8 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator speed* layer_height = 0.32 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.8 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator quality* layer_height = 0.4 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.8 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator speed* layer_height = 0.4 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.8 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator quality* layer_height = 0.4 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.4mm 0.8 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator speed* layer_height = 0.4 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid [print:0.48mm 0.8 nozzle DETAILED QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator quality* layer_height = 0.48 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.48mm 0.8 nozzle DETAILED SPEED @PREDATOR] inherits = *common predator 0.8 nozzle detailed*; *common predator speed* layer_height = 0.48 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid [print:0.48mm 0.8 nozzle COARSE QUALITY @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator quality* layer_height = 0.48 max_print_speed = 80 perimeters = 2 fill_pattern = gyroid [print:0.48mm 0.8 nozzle COARSE SPEED @PREDATOR] inherits = *common predator 0.8 nozzle coarse*; *common predator speed* layer_height = 0.48 max_print_speed = 90 perimeters = 2 fill_pattern = gyroid ######################################### ########### end print presets ########### ######################################### ######################################### ######## begin filament presets ######### ######################################### # Common filament preset [filament:*common predator*] cooling = 0 compatible_printers = extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_PREDATOR.*/ [filament:*PLA predator*] inherits = *common predator* bed_temperature = 60 fan_below_layer_time = 100 filament_colour = #FF3232 filament_max_volumetric_speed = 10 filament_type = PLA filament_density = 1.24 filament_cost = 20 first_layer_bed_temperature = 60 first_layer_temperature = 200 fan_always_on = 1 cooling = 1 max_fan_speed = 100 min_fan_speed = 100 bridge_fan_speed = 100 disable_fan_first_layers = 1 temperature = 200 [filament:*PET predator*] inherits = *common predator* bed_temperature = 70 cooling = 1 disable_fan_first_layers = 3 fan_below_layer_time = 20 filament_colour = #FF8000 filament_max_volumetric_speed = 8 filament_type = PETG filament_density = 1.27 filament_cost = 30 first_layer_bed_temperature =70 first_layer_temperature = 240 fan_always_on = 1 max_fan_speed = 50 min_fan_speed = 20 bridge_fan_speed = 100 temperature = 240 [filament:*ABS predator*] inherits = *common predator* bed_temperature = 100 cooling = 0 disable_fan_first_layers = 3 fan_below_layer_time = 20 filament_colour = #3A80CA filament_max_volumetric_speed = 10 filament_type = ABS filament_density = 1.04 filament_cost = 20 first_layer_bed_temperature = 100 first_layer_temperature = 245 fan_always_on = 0 max_fan_speed = 0 min_fan_speed = 0 bridge_fan_speed = 30 top_fan_speed = 0 temperature = 245 [filament:Generic PLA @PREDATOR] inherits = *PLA predator* filament_vendor = Generic [filament:Generic PETG @PREDATOR] inherits = *PET predator* filament_vendor = Generic [filament:Generic ABS @PREDATOR] inherits = *ABS predator* filament_vendor = Generic ######################################### ######### end filament presets ########## ######################################### ######################################### ######### begin printer presets ######### ######################################### # Anycubic predator common printer preset [printer:*common predator*] printer_vendor = Anycubic printer_model = Predator printer_technology = FFF printer_variant = 0.4 thumbnails = 16x16,220x124 bed_shape = 188.779x16.516,186.621x32.9063,183.043x49.0462,178.072x64.8128,171.745x80.0862,164.112x94.75,155.229x108.693,145.165x121.808,133.997x133.997,121.808x145.165,108.693x155.229,94.75x164.112,80.0862x171.745,64.8128x178.072,49.0462x183.043,32.9063x186.621,16.516x188.779,1.16035e-14x189.5,-16.516x188.779,-32.9063x186.621,-49.0462x183.043,-64.8128x178.072,-80.0862x171.745,-94.75x164.112,-108.693x155.229,-121.808x145.165,-133.997x133.997,-145.165x121.808,-155.229x108.693,-164.112x94.75,-171.745x80.0862,-178.072x64.8128,-183.043x49.0462,-186.621x32.9063,-188.779x16.516,-189.5x2.32071e-14,-188.779x-16.516,-186.621x-32.9063,-183.043x-49.0462,-178.072x-64.8128,-171.745x-80.0862,-164.112x-94.75,-155.229x-108.693,-145.165x-121.808,-133.997x-133.997,-121.808x-145.165,-108.693x-155.229,-94.75x-164.112,-80.0862x-171.745,-64.8128x-178.072,-49.0462x-183.043,-32.9063x-186.621,-16.516x-188.779,-3.48106e-14x-189.5,16.516x-188.779,32.9063x-186.621,49.0462x-183.043,64.8128x-178.072,80.0862x-171.745,94.75x-164.112,108.693x-155.229,121.808x-145.165,133.997x-133.997,145.165x-121.808,155.229x-108.693,164.112x-94.75,171.745x-80.0862,178.072x-64.8128,183.043x-49.0462,186.621x-32.9063,188.779x-16.516,189.5x-4.64141e-14 max_print_height = 445 z_offset = 0 single_extruder_multi_material = 0 gcode_flavor = reprap silent_mode = 0 remaining_times = 0 use_relative_e_distances = 0 use_firmware_retraction = 0 use_volumetric_e = 0 variable_layer_height = 1 start_gcode = ; start_gcode | start\n\n; v11 2020-11-14_11-27 tillverka\n\n; set metric values\n\nG21\n\n; use absolute positioning\n\nG90\n\n; set extruder to absolute mode\n\nM82\n\n; start with fan off\n\nM107\n\n; set temps\n\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\n\n; home xy\n\nG28 X0 Y0\n\n; home z\n\nG28 Z0\n\n; move the head down to Z 94mm\n\nG1 Z94.0 F2394\n\n; set and wait for temps\n\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\n\n; zero the extruded length\n\nG92 E0\n\n; extrude 3mm of feed stock\n\nG1 F200 E3\n\n; zero the extruded length again\n\nG92 E0\n\n; set speed\n\nG1 F{travel_speed}\n\n; print preskirt\n\nG92 E0\nG1 E3.94000 F2520.00000\n\nG1 X125.464 Y-139.310\nG1 Z0.329 F3994.000\n\nG1 F994.000\n\nG1 X125.464 Y-139.310 E4.19679\nG1 X130.218 Y-134.876 E4.70359\nG1 X132.569 Y-132.567 E4.96053\nG1 X137.099 Y-127.877 E5.46890\nG1 X139.325 Y-125.447 E5.72585\nG1 X141.507 Y-122.981 E5.98254\nG1 X145.685 Y-118.002 E6.48934\nG1 X149.741 Y-112.810 E7.00296\nG1 X153.561 Y-107.552 E7.50975\nG1 X155.440 Y-104.819 E7.76827\nG1 X158.980 Y-99.367 E8.27506\nG1 X160.702 Y-96.558 E8.53201\nG1 X163.962 Y-90.911 E9.04038\nG1 X165.535 Y-88.015 E9.29732\nG1 X168.496 Y-82.205 E9.80570\nG1 X169.915 Y-79.231 E10.06264\nG1 X171.280 Y-76.235 E10.31934\nG1 X173.819 Y-70.251 E10.82613\nG1 X176.180 Y-64.101 E11.33975\nG1 X178.297 Y-57.955 E11.84654\nG1 X179.294 Y-54.793 E12.10507\nG1 X181.085 Y-48.544 E12.61186\nG1 X181.911 Y-45.354 E12.86880\nG1 X183.378 Y-39.001 E13.37718\nG1 X184.035 Y-35.771 E13.63412\nG1 X185.168 Y-29.350 E14.14250\nG1 X185.655 Y-26.091 E14.39944\nG1 X186.084 Y-22.826 E14.65614\nG1 X186.764 Y-16.362 E15.16293\nG1 X187.223 Y-9.790 E15.67655\nG1 X187.450 Y-3.294 E16.18334\nG1 X187.479 Y0.002 E16.44028\nG1 X187.450 Y3.294 E16.69698\nG1 X187.223 Y9.810 E17.20529\nG1 X187.021 Y13.100 E17.46229\nG1 X186.454 Y19.575 E17.96909\nG1 X186.079 Y22.870 E18.22761\nG1 X185.174 Y29.307 E18.73440\nG1 X184.031 Y35.794 E19.24802\nG1 X182.679 Y42.152 E19.75481\nG1 X181.910 Y45.357 E20.01176\nG1 X180.223 Y51.655 E20.52013\nG1 X179.287 Y54.815 E20.77708\nG1 X177.272 Y61.017 E21.28545\nG1 X176.172 Y64.123 E21.54239\nG1 X175.019 Y67.207 E21.79909\nG1 X172.584 Y73.234 E22.30588\nG1 X169.905 Y79.252 E22.81950\nG1 X167.055 Y85.094 E23.32629\nG1 X165.524 Y88.035 E23.58482\nG1 X162.373 Y93.721 E24.09161\nG1 X160.700 Y96.560 E24.34855\nG1 X157.245 Y102.090 E24.85693\nG1 X155.427 Y104.838 E25.11387\nG1 X151.687 Y110.180 E25.62225\nG1 X149.727 Y112.829 E25.87919\nG1 X147.722 Y115.441 E26.13588\nG1 X143.631 Y120.493 E26.64268\nG1 X139.310 Y125.464 E27.15629\nG1 X134.876 Y130.218 E27.66309\nG1 X132.567 Y132.569 E27.92003\nG1 X127.877 Y137.099 E28.42840\nG1 X125.447 Y139.325 E28.68535\nG1 X122.981 Y141.507 E28.94204\nG1 X118.002 Y145.685 E29.44883\nG1 X112.810 Y149.741 E29.96245\nG1 X107.552 Y153.561 E30.46924\nG1 X104.819 Y155.440 E30.72777\nG1 X99.367 Y158.980 E31.23456\nG1 X96.558 Y160.702 E31.49151\nG1 X90.911 Y163.962 E31.99988\nG1 X88.015 Y165.535 E32.25682\nG1 X82.205 Y168.496 E32.76520\nG1 X79.231 Y169.915 E33.02214\nG1 X76.235 Y171.280 E33.27884\nG1 X70.251 Y173.819 E33.78563\nG1 X64.101 Y176.180 E34.29925\nG1 X57.955 Y178.297 E34.80604\nG1 X54.793 Y179.294 E35.06457\nG1 X48.544 Y181.085 E35.57136\nG1 X45.354 Y181.911 E35.82830\nG1 X39.001 Y183.378 E36.33668\nG1 X35.771 Y184.035 E36.59362\nG1 X29.350 Y185.168 E37.10200\nG1 X26.091 Y185.655 E37.35894\nG1 X22.826 Y186.084 E37.61563\nG1 X16.362 Y186.764 E38.12242\nG1 X9.790 Y187.223 E38.63605\nG1 X3.294 Y187.450 E39.14283\nG1 X-0.002 Y187.479 E39.39978\nG1 X-3.294 Y187.450 E39.65648\nG1 X-9.810 Y187.223 E40.16479\nG1 X-13.100 Y187.021 E40.42179\nG1 X-19.575 Y186.454 E40.92858\nG1 X-22.870 Y186.079 E41.18711\nG1 X-29.307 Y185.174 E41.69390\nG1 X-35.794 Y184.031 E42.20752\nG1 X-42.152 Y182.679 E42.71431\nG1 X-45.357 Y181.910 E42.97126\nG1 X-51.655 Y180.223 E43.47963\nG1 X-54.815 Y179.287 E43.73657\nG1 X-61.017 Y177.272 E44.24495\nG1 X-64.123 Y176.172 E44.50189\nG1 X-67.207 Y175.019 E44.75859\nG1 X-73.234 Y172.584 E45.26538\nG1 X-79.252 Y169.905 E45.77900\nG1 X-85.094 Y167.055 E46.28579\nG1 X-88.035 Y165.524 E46.54432\nG1 X-93.721 Y162.373 E47.05111\nG1 X-96.560 Y160.700 E47.30805\nG1 X-102.090 Y157.245 E47.81643\nG1 X-104.838 Y155.427 E48.07337\nG1 X-110.180 Y151.687 E48.58174\nG1 X-112.829 Y149.727 E48.83869\nG1 X-115.441 Y147.722 E49.09538\nG1 X-120.493 Y143.631 E49.60218\nG1 X-125.464 Y139.310 E50.11579\nG1 X-130.218 Y134.876 E50.62259\nG1 X-132.569 Y132.567 E50.87953\nG1 X-137.099 Y127.877 E51.38790\nG1 X-139.325 Y125.447 E51.64485\nG1 X-141.507 Y122.981 E51.90154\nG1 X-145.685 Y118.002 E52.40833\nG1 X-149.741 Y112.810 E52.92195\nG1 X-153.561 Y107.552 E53.42874\nG1 X-155.440 Y104.819 E53.68727\nG1 X-158.980 Y99.367 E54.19406\nG1 X-160.702 Y96.558 E54.45101\nG1 X-163.962 Y90.911 E54.95938\nG1 X-165.535 Y88.015 E55.21632\nG1 X-168.496 Y82.205 E55.72470\nG1 X-169.915 Y79.231 E55.98164\nG1 X-171.280 Y76.235 E56.23834\nG1 X-173.819 Y70.251 E56.74513\nG1 X-176.180 Y64.101 E57.25875\nG1 X-178.297 Y57.955 E57.76554\nG1 X-179.294 Y54.793 E58.02407\nG1 X-181.085 Y48.544 E58.53086\nG1 X-181.911 Y45.354 E58.78780\nG1 X-183.378 Y39.001 E59.29618\nG1 X-184.035 Y35.771 E59.55312\nG1 X-185.168 Y29.350 E60.06149\nG1 X-185.655 Y26.091 E60.31844\nG1 X-186.084 Y22.826 E60.57513\nG1 X-186.764 Y16.362 E61.08192\nG1 X-187.223 Y9.790 E61.59554\nG1 X-187.450 Y3.294 E62.10233\nG1 X-187.479 Y-0.002 E62.35928\nG1 X-187.450 Y-3.294 E62.61598\nG1 X-187.223 Y-9.810 E63.12429\nG1 X-187.021 Y-13.100 E63.38129\nG1 X-186.454 Y-19.575 E63.88808\nG1 X-186.079 Y-22.870 E64.14661\nG1 X-185.174 Y-29.307 E64.65340\nG1 X-184.031 Y-35.794 E65.16702\nG1 X-182.679 Y-42.152 E65.67381\nG1 X-181.910 Y-45.357 E65.93076\nG1 X-180.223 Y-51.655 E66.43913\nG1 X-179.287 Y-54.815 E66.69607\nG1 X-177.272 Y-61.017 E67.20445\nG1 X-176.172 Y-64.123 E67.46139\nG1 X-175.019 Y-67.207 E67.71809\nG1 X-172.584 Y-73.234 E68.22488\nG1 X-169.905 Y-79.252 E68.73850\nG1 X-167.055 Y-85.094 E69.24529\nG1 X-165.524 Y-88.035 E69.50382\nG1 X-162.373 Y-93.721 E70.01061\nG1 X-160.700 Y-96.560 E70.26755\nG1 X-157.245 Y-102.090 E70.77593\nG1 X-155.427 Y-104.838 E71.03287\nG1 X-151.687 Y-110.180 E71.54124\nG1 X-149.727 Y-112.829 E71.79819\nG1 X-147.722 Y-115.441 E72.05488\nG1 X-143.631 Y-120.493 E72.56167\nG1 X-139.310 Y-125.464 E73.07529\nG1 X-134.876 Y-130.218 E73.58209\nG1 X-132.567 Y-132.569 E73.83903\nG1 X-127.877 Y-137.099 E74.34740\nG1 X-125.447 Y-139.325 E74.60435\nG1 X-122.981 Y-141.507 E74.86104\nG1 X-118.002 Y-145.685 E75.36783\nG1 X-112.810 Y-149.741 E75.88145\nG1 X-107.552 Y-153.561 E76.38824\nG1 X-104.819 Y-155.440 E76.64677\nG1 X-99.367 Y-158.980 E77.15356\nG1 X-96.558 Y-160.702 E77.41051\nG1 X-90.911 Y-163.962 E77.91888\nG1 X-88.015 Y-165.535 E78.17582\nG1 X-82.205 Y-168.496 E78.68420\nG1 X-79.231 Y-169.915 E78.94114\nG1 X-76.235 Y-171.280 E79.19784\nG1 X-70.251 Y-173.819 E79.70463\nG1 X-64.101 Y-176.180 E80.21825\nG1 X-57.955 Y-178.297 E80.72504\nG1 X-54.793 Y-179.294 E80.98356\nG1 X-48.544 Y-181.085 E81.49036\nG1 X-45.354 Y-181.911 E81.74730\nG1 X-39.001 Y-183.378 E82.25568\nG1 X-35.771 Y-184.035 E82.51262\nG1 X-29.350 Y-185.168 E83.02099\nG1 X-26.091 Y-185.655 E83.27794\nG1 X-22.826 Y-186.084 E83.53463\nG1 X-16.362 Y-186.764 E84.04142\nG1 X-9.790 Y-187.223 E84.55504\nG1 X-3.294 Y-187.450 E85.06183\nG1 X0.006 Y-187.479 E85.31908\nG1 X6.521 Y-187.366 E85.82715\nG1 X9.810 Y-187.223 E86.08379\nG1 X13.100 Y-187.021 E86.34079\nG1 X19.575 Y-186.454 E86.84758\nG1 X22.870 Y-186.079 E87.10611\nG1 X29.307 Y-185.174 E87.61290\nG1 X35.794 Y-184.031 E88.12652\nG1 X42.152 Y-182.679 E88.63331\nG1 X45.357 Y-181.910 E88.89025\nG1 X51.655 Y-180.223 E89.39863\nG1 X54.815 Y-179.287 E89.65557\nG1 X61.017 Y-177.272 E90.16395\nG1 X64.123 Y-176.172 E90.42089\nG1 X67.207 Y-175.019 E90.67759\nG1 X73.234 Y-172.584 E91.18438\nG1 X79.252 Y-169.905 E91.69800\nG1 X85.094 Y-167.055 E92.20479\nG1 X88.035 Y-165.524 E92.46332\nG1 X93.721 Y-162.373 E92.97011\nG1 X96.560 Y-160.700 E93.22705\nG1 X102.090 Y-157.245 E93.73543\nG1 X104.838 Y-155.427 E93.99237\nG1 X110.180 Y-151.687 E94.50074\nG1 X112.829 Y-149.727 E94.75768\nG1 X115.441 Y-147.722 E95.01438\nG1 X120.493 Y-143.631 E95.52117\nG1 X122.911 Y-141.529 E95.77098\n\n; end preskirt\n; start_gcode | end end_gcode = ; end_gcode | start\n\n; v11 2020-11-14_11-27 tillverka\n\n; use relative positioning\n\nG91\n\n; retract the filament a bit before lifting the nozzle to release some of the pressure\n\nG1 E-1 F300\n\n; home\n\nG28\n\n; use absolute positioning\n\nG90\n\n; cooldown\n\nM104 S0\nM140 S0\n\n; end_gcode | end\n before_layer_gcode = layer_gcode = toolchange_gcode = between_objects_gcode = retract_length = 4 retract_lift = 0.3 retract_lift_above = 0 retract_lift_below = 449 retract_speed = 30 deretract_speed = 0 retract_restart_extra = 0 retract_before_travel = 2 retract_layer_change = 1 wipe = 1 retract_before_wipe = 70% retract_length_toolchange = 10 retract_restart_extra_toolchange = 0 extruder_colour = #1193FF machine_max_acceleration_e = 3000 machine_max_acceleration_extruding = 1000 machine_max_acceleration_retracting = 1000 machine_max_acceleration_x = 1500 machine_max_acceleration_y = 1500 machine_max_acceleration_z = 1500 machine_max_feedrate_e = 60 machine_max_feedrate_x = 200 machine_max_feedrate_y = 200 machine_max_feedrate_z = 200 machine_max_jerk_e = 5 machine_max_jerk_x = 5 machine_max_jerk_y = 5 machine_max_jerk_z = 5 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 printer_settings_id = printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PREDATOR\nPRINTER_HAS_BOWDEN\n default_filament_profile = Generic PLA @PREDATOR [printer:Anycubic Predator 0.4 nozzle] inherits = *common predator* printer_model = PREDATOR printer_variant = 0.4 nozzle_diameter = 0.4 min_layer_height = 0.08 max_layer_height = 0.32 default_print_profile = 0.16mm 0.4 nozzle DETAILED QUALITY @PREDATOR [printer:Anycubic Predator 0.6 nozzle] inherits = *common predator* printer_model = PREDATOR printer_variant = 0.6 nozzle_diameter = 0.6 min_layer_height = 0.12 max_layer_height = 0.4 default_print_profile = 0.24mm 0.8 nozzle DETAILED QUALITY @PREDATOR [printer:Anycubic Predator 0.8 nozzle] inherits = *common predator* printer_model = PREDATOR printer_variant = 0.8 nozzle_diameter = 0.8 min_layer_height = 0.16 max_layer_height = 0.48 default_print_profile = 0.24mm 0.8 nozzle DETAILED QUALITY @PREDATOR ## Anycubic 4MAX Pro 2.0 ## based on https://hartrusion.com/en/prusaslicer-config-for-anycubic-4max-pro-2-0/ [print:*common_4max*] avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic bottom_solid_layers = 4 bridge_acceleration = 300 bridge_angle = 0 bridge_flow_ratio = 0.65 bridge_speed = 30 brim_separation = 0 brim_type = outer_only brim_width = 0 clip_multipart_objects = 1 compatible_printers_condition = printer_model=="4MAXPRO20" and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 900 dont_support_bridges = 1 draft_shield = disabled elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = gyroid first_layer_acceleration = 300 first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 first_layer_speed = 20 first_layer_speed_over_raft = 30 fuzzy_skin = none fuzzy_skin_point_dist = 0.8 fuzzy_skin_thickness = 0.3 gap_fill_enabled = 1 gap_fill_speed = 40 gcode_comments = 0 gcode_label_objects = 0 gcode_resolution = 0.0125 infill_acceleration = 600 infill_anchor = 400% infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 23% infill_speed = 45 inherits = interface_shells = 0 ironing = 0 ironing_flowrate = 15% ironing_spacing = 0.1 ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 50 max_volumetric_speed = 0 min_skirt_length = 0 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode overhangs = 1 perimeter_acceleration = 500 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 45 perimeters = 3 post_process = print_settings_id = raft_contact_distance = 0.1 raft_expansion = 1.5 raft_first_layer_density = 90% raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 5 skirt_height = 1 skirts = 2 slicing_mode = regular small_perimeter_speed = 20 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 45 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_bottom_contact_distance = 0 support_material_bottom_interface_layers = -1 support_material_buildplate_only = 1 support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.4 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_pattern = rectilinear support_material_interface_spacing = 0.2 support_material_interface_speed = 30 support_material_pattern = rectilinear-grid support_material_spacing = 2.5 support_material_speed = 45 support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 1 support_material_xy_spacing = 60% thick_bridges = 1 thin_walls = 0 top_fill_pattern = monotonic top_infill_extrusion_width = 0.4 top_solid_infill_speed = 30 top_solid_layers = 5 travel_speed = 60 travel_speed_z = 0 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_brim_width = 2 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [print:0.15mm Detail @4Max Pro 2.0] inherits = *common_4max* layer_height = 0.15 bottom_solid_layers = 5 top_solid_layers = 7 perimeter_speed = 40 external_perimeter_speed = 25 [print:0.20mm Quality @4Max Pro 2.0] inherits = *common_4max* external_perimeter_speed = 25 [print:0.30mm Draft @4Max Pro 2.0] inherits = *common_4max* layer_height = 0.3 bottom_solid_layers = 3 top_solid_layers = 3 [filament:*common_4max*] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers_condition = printer_model=="4MAXPRO20" cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 30 filament_density = 1.24 filament_diameter = 1.75 filament_max_volumetric_speed = 0 filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 210 full_fan_speed_layer = 5 max_fan_speed = 100 min_fan_speed = 80 min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 205 [filament:*PLA_4max*] inherits = *common_4max* [filament:Generic PLA @4Max Pro 2.0] inherits = *PLA_4max* filament_vendor = Generic [filament:Anycubic PLA @4Max Pro 2.0] inherits = *PLA_4max* first_layer_temperature = 215 temperature = 207 filament_vendor = Anycubic [filament:Generic ABS @4Max Pro 2.0] filament_vendor = Generic compatible_printers_condition = printer_model=="4MAXPRO20" bed_temperature = 100 first_layer_bed_temperature = 100 temperature = 245 first_layer_temperature = 245 bridge_fan_speed = 15 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #800000 filament_density = 1.04 filament_diameter = 1.75 filament_type = ABS full_fan_speed_layer = 0 max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 10 slowdown_below_layer_time = 25 [filament:Generic TPU @4Max Pro 2.0] filament_vendor = Generic bed_temperature = 60 bridge_fan_speed = 0 compatible_printers_condition = printer_model=="4MAXPRO20" cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #211AB5 filament_density = 1.19 filament_deretract_speed = 20 filament_diameter = 1.75 filament_retract_speed = 30 filament_type = FLEX filament_max_volumetric_speed = 1.65 first_layer_bed_temperature = 60 first_layer_temperature = 215 full_fan_speed_layer = 0 max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 10 slowdown_below_layer_time = 20 temperature = 215 [filament:Polymaker PolyFlex TPU95 @4Max Pro 2.0] filament_vendor = Polymaker bed_temperature = 45 bridge_fan_speed = 80 compatible_printers_condition = printer_model=="4MAXPRO20" cooling = 1 disable_fan_first_layers = 5 extrusion_multiplier = 1.04 fan_always_on = 1 fan_below_layer_time = 45 filament_colour = #FD7D2F filament_density = 1.22 filament_deretract_speed = 25 filament_diameter = 1.75 filament_max_volumetric_speed = 1.65 filament_retract_length = 4 filament_retract_restart_extra = 0.1 filament_retract_speed = 60 filament_type = FLEX first_layer_bed_temperature = 55 first_layer_temperature = 215 full_fan_speed_layer = 8 max_fan_speed = 50 min_fan_speed = 25 min_print_speed = 10 slowdown_below_layer_time = 10 temperature = 217 [printer:Anycubic 4Max Pro 2.0] printer_model = 4MAXPRO20 printer_variant = 0.4 printer_technology = FFF bed_shape = 0x0,270x0,270x210,0x210 color_change_gcode = M600 default_filament_profile = Generic PLA @4Max Pro 2.0 default_print_profile = 0.20mm Quality @4Max Pro 2.0 deretract_speed = 25 end_gcode = M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_feedrate_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_feedrate_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n extruder_offset = 0x0 gcode_flavor = marlin machine_limits_usage = time_estimate_only machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 1250 machine_max_acceleration_retracting = 1250 machine_max_acceleration_travel = 1500 machine_max_acceleration_x = 900 machine_max_acceleration_y = 900 machine_max_acceleration_z = 100 machine_max_feedrate_e = 120 machine_max_feedrate_x = 200 machine_max_feedrate_y = 200 machine_max_feedrate_z = 16 machine_max_jerk_e = 5 machine_max_jerk_x = 6 machine_max_jerk_y = 6 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 max_layer_height = 0.3 max_print_height = 190 min_layer_height = 0.07 nozzle_diameter = 0.4 pause_print_gcode = M601 remaining_times = 0 retract_before_travel = 2 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 2.5 retract_length_toolchange = 10 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_feedrate_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[first_layer_temperature] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retract_length] F{retract_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retract_length] F{retract_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retract_length] F{retract_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retract_length] F{retract_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5 use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 variable_layer_height = 1 wipe = 0 z_offset = 0 ## SLA printers [sla_print:*common print ANYCUBIC SLA*] compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ layer_height = 0.05 pad_edge_radius = 0.5 pad_enable = 1 pad_max_merge_distance = 50 pad_wall_height = 0 pad_wall_thickness = 1 pad_wall_slope = 45 faded_layers = 8 slice_closing_radius = 0.005 support_base_diameter = 3 support_base_height = 1 support_critical_angle = 45 support_density_at_45 = 250 support_density_at_horizontal = 500 support_head_front_diameter = 0.4 support_head_penetration = 0.4 support_head_width = 3 support_max_bridge_length = 10 support_minimal_z = 0 support_object_elevation = 5 support_pillar_diameter = 1 support_pillar_connection_mode = zigzag support_pillar_widening_factor = 0 supports_enable = 1 support_small_pillar_diameter_percent = 60% [sla_print:0.05 Normal @ANYCUBIC ABSTRACT] inherits = *common print ANYCUBIC SLA* compatible_printers_condition = printer_notes=~/.*ABSTRACT_ONLY.*/ layer_height = 0.05 [sla_print:0.05 Normal @ANYCUBIC MONO] inherits = 0.05 Normal @ANYCUBIC ABSTRACT compatible_printers_condition = printer_notes=~/.*PHOTONMONO\n.*/ output_filename_format = [input_filename_base].pwmo [sla_print:0.05 Normal @ANYCUBIC MONO X] inherits = 0.05 Normal @ANYCUBIC ABSTRACT compatible_printers_condition = printer_notes=~/.*PHOTONMONOX\n.*/ output_filename_format = [input_filename_base].pwmx [sla_print:0.05 Normal @ANYCUBIC MONO SE] inherits = 0.05 Normal @ANYCUBIC ABSTRACT compatible_printers_condition = printer_notes=~/.*PHOTONMONOSE\n.*/ output_filename_format = [input_filename_base].pwma ## SLA materials #MONO series printer need a significantly reduced exposure time but are otherwise compatible [sla_material:*common ANYCUBIC SLA*] compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ compatible_prints_condition = layer_height == 0.05 exposure_time = 7 initial_exposure_time = 40 initial_layer_height = 0.05 material_correction = 1,1,1 material_notes = #Distances are defined in mm, speeds are defined in mm/s.\n#Delay is defined in s.\nLIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5\nANTIALIASING=1 [sla_material:*common 0.05 ANYCUBIC SLA*] inherits = *common ANYCUBIC SLA* [sla_material:Generic Blue Resin @MONO 0.05] inherits = *common 0.05 ANYCUBIC SLA* exposure_time = 2.5 initial_exposure_time = 40 material_type = Tough material_vendor = Generic material_colour = #6080EC compatible_printers_condition = printer_notes=~/.*MONO.*/ and printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ ## Printers [printer:Anycubic Photon Mono] printer_technology = SLA printer_model = PHOTON MONO printer_variant = default default_sla_material_profile = Generic Blue Resin @MONO 0.05 default_sla_print_profile = 0.05 Normal @ANYCUBIC thumbnails = 224x168 sla_archive_format = pwmo bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56 display_orientation = landscape display_mirror_x = 1 display_mirror_y = 0 display_pixels_x = 1620 display_pixels_y = 2560 display_width = 82.62 display_height = 130.56 max_print_height = 165 elefant_foot_compensation = 0.2 elefant_foot_min_width = 0.2 min_exposure_time = 0.8 max_exposure_time = 120 min_initial_exposure_time = 0.8 max_initial_exposure_time = 300 printer_correction = 1,1,1 gamma_correction = 1 area_fill = 50 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONO\nPRINTER_TECHNOLOGY_SLA\n [printer:Anycubic Photon Mono SE] printer_technology = SLA printer_model = PHOTON MONO SE printer_variant = default default_sla_material_profile = Generic Blue Resin @MONO 0.05 default_sla_print_profile = 0.05 Normal @ANYCUBIC thumbnails = 224x168 sla_archive_format = pwms bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56 display_orientation = landscape display_mirror_x = 1 display_mirror_y = 0 display_pixels_x = 1620 display_pixels_y = 2560 display_width = 82.62 display_height = 130.56 max_print_height = 160 elefant_foot_compensation = 0.2 elefant_foot_min_width = 0.2 min_exposure_time = 0.8 max_exposure_time = 120 min_initial_exposure_time = 0.8 max_initial_exposure_time = 300 printer_correction = 1,1,1 gamma_correction = 1 area_fill = 45 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOSE\nPRINTER_TECHNOLOGY_SLA\n [printer:Anycubic Photon Mono X] printer_technology = SLA printer_model = PHOTON MONO X printer_variant = default default_sla_material_profile = Generic Blue Resin @MONO 0.05 default_sla_print_profile = 0.05 Normal @ANYCUBIC thumbnails = 224x168 sla_archive_format = pwmx bed_shape = 1.48x1.02,193.48x1.02,193.48x121.02,1.48x121.02 display_height = 120 display_orientation = landscape display_mirror_x = 1 display_mirror_y = 0 display_pixels_x = 3840 display_pixels_y = 2400 display_width = 192 max_print_height = 245 elefant_foot_compensation = 0.2 elefant_foot_min_width = 0.2 min_exposure_time = 1 max_exposure_time = 120 min_initial_exposure_time = 1 max_initial_exposure_time = 300 printer_correction = 1,1,1 gamma_correction = 1 area_fill = 45 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX\nPRINTER_TECHNOLOGY_SLA\n