# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-10-05 16:27+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:303 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:267 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:141 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:210 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:367 #: src/slic3r/GUI/GUI_App.cpp:255 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:269 src/slic3r/GUI/GUI_App.cpp:261 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:270 src/slic3r/GUI/GUI_App.cpp:261 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:271 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:272 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:308 msgid "Copy Version Info" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85 msgid "" "Please save your project and restart PrusaSlicer. We would be glad if you " "reported the issue." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:204 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:199 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:286 msgid "Access violation" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:288 msgid "Illegal instruction" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290 msgid "Divide by zero" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:292 msgid "Overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:294 msgid "Underflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:297 msgid "Floating reserved operand" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300 msgid "Stack overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:659 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:726 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:690 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710 msgid "Unknown error occured during exporting G-code." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:695 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?\n" "Error message: %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:698 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:701 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:704 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:707 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:729 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:751 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:92 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219 src/slic3r/GUI/Plater.cpp:171 #: src/slic3r/GUI/Tab.cpp:2686 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:94 src/libslic3r/PrintConfig.cpp:981 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:109 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:120 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:128 src/slic3r/GUI/ConfigWizard.cpp:258 #: src/slic3r/GUI/ConfigWizard.cpp:1466 src/slic3r/GUI/ConfigWizard.cpp:1480 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100 #: src/slic3r/GUI/GCodeViewer.cpp:3448 src/slic3r/GUI/GCodeViewer.cpp:3454 #: src/slic3r/GUI/GCodeViewer.cpp:3462 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:321 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:410 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:479 #: src/slic3r/GUI/ObjectDataViewModel.cpp:134 #: src/slic3r/GUI/WipeTowerDialog.cpp:116 src/libslic3r/PrintConfig.cpp:240 #: src/libslic3r/PrintConfig.cpp:257 src/libslic3r/PrintConfig.cpp:264 #: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:486 #: src/libslic3r/PrintConfig.cpp:512 src/libslic3r/PrintConfig.cpp:587 #: src/libslic3r/PrintConfig.cpp:595 src/libslic3r/PrintConfig.cpp:645 #: src/libslic3r/PrintConfig.cpp:775 src/libslic3r/PrintConfig.cpp:786 #: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:984 #: src/libslic3r/PrintConfig.cpp:1192 src/libslic3r/PrintConfig.cpp:1256 #: src/libslic3r/PrintConfig.cpp:1265 src/libslic3r/PrintConfig.cpp:1536 #: src/libslic3r/PrintConfig.cpp:1730 src/libslic3r/PrintConfig.cpp:1791 #: src/libslic3r/PrintConfig.cpp:1809 src/libslic3r/PrintConfig.cpp:1827 #: src/libslic3r/PrintConfig.cpp:1888 src/libslic3r/PrintConfig.cpp:1898 #: src/libslic3r/PrintConfig.cpp:2011 src/libslic3r/PrintConfig.cpp:2020 #: src/libslic3r/PrintConfig.cpp:2039 src/libslic3r/PrintConfig.cpp:2060 #: src/libslic3r/PrintConfig.cpp:2068 src/libslic3r/PrintConfig.cpp:2109 #: src/libslic3r/PrintConfig.cpp:2117 src/libslic3r/PrintConfig.cpp:2127 #: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2143 #: src/libslic3r/PrintConfig.cpp:2205 src/libslic3r/PrintConfig.cpp:2434 #: src/libslic3r/PrintConfig.cpp:2503 src/libslic3r/PrintConfig.cpp:2520 #: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2627 #: src/libslic3r/PrintConfig.cpp:2677 src/libslic3r/PrintConfig.cpp:2827 #: src/libslic3r/PrintConfig.cpp:2915 src/libslic3r/PrintConfig.cpp:2922 #: src/libslic3r/PrintConfig.cpp:2929 src/libslic3r/PrintConfig.cpp:2943 #: src/libslic3r/PrintConfig.cpp:2967 src/libslic3r/PrintConfig.cpp:2977 #: src/libslic3r/PrintConfig.cpp:2987 src/libslic3r/PrintConfig.cpp:3147 #: src/libslic3r/PrintConfig.cpp:3181 src/libslic3r/PrintConfig.cpp:3320 #: src/libslic3r/PrintConfig.cpp:3329 src/libslic3r/PrintConfig.cpp:3338 #: src/libslic3r/PrintConfig.cpp:3348 src/libslic3r/PrintConfig.cpp:3413 #: src/libslic3r/PrintConfig.cpp:3423 src/libslic3r/PrintConfig.cpp:3435 #: src/libslic3r/PrintConfig.cpp:3455 src/libslic3r/PrintConfig.cpp:3465 #: src/libslic3r/PrintConfig.cpp:3475 src/libslic3r/PrintConfig.cpp:3493 #: src/libslic3r/PrintConfig.cpp:3508 src/libslic3r/PrintConfig.cpp:3522 #: src/libslic3r/PrintConfig.cpp:3533 src/libslic3r/PrintConfig.cpp:3546 #: src/libslic3r/PrintConfig.cpp:3591 src/libslic3r/PrintConfig.cpp:3601 #: src/libslic3r/PrintConfig.cpp:3610 src/libslic3r/PrintConfig.cpp:3620 #: src/libslic3r/PrintConfig.cpp:3636 src/libslic3r/PrintConfig.cpp:3660 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:130 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:140 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:141 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:142 src/slic3r/GUI/GUI_Preview.cpp:251 #: src/libslic3r/ExtrusionEntity.cpp:325 src/libslic3r/ExtrusionEntity.cpp:360 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:144 msgid "Invalid" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:155 src/slic3r/GUI/BedShapeDialog.cpp:225 #: src/slic3r/GUI/GUI_ObjectList.cpp:1682 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:249 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:298 src/slic3r/GUI/GCodeViewer.cpp:3981 #: src/slic3r/GUI/MainFrame.cpp:2146 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:322 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:332 src/slic3r/GUI/BedShapeDialog.cpp:414 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:341 src/slic3r/GUI/BedShapeDialog.cpp:422 #: src/slic3r/GUI/Tab.cpp:3660 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:374 src/slic3r/GUI/BedShapeDialog.cpp:455 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:404 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:572 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:579 src/slic3r/GUI/BedShapeDialog.cpp:628 #: src/slic3r/GUI/BedShapeDialog.cpp:651 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:590 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:598 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:602 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:617 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:640 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1386 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:224 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:231 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Revert color to default" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:51 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:52 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:56 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:49 msgid "" "Layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:51 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1436 #: src/libslic3r/PrintConfig.cpp:253 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:62 msgid "" "First layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:64 src/libslic3r/PrintConfig.cpp:1188 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:84 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:92 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:94 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:124 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:128 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:130 #: src/slic3r/GUI/ConfigManipulation.cpp:151 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:146 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:149 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:170 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:173 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:174 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:201 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:204 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:206 #: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128 #: src/slic3r/GUI/Plater.cpp:416 src/slic3r/GUI/Tab.cpp:1490 #: src/slic3r/GUI/Tab.cpp:1492 src/libslic3r/PrintConfig.cpp:441 #: src/libslic3r/PrintConfig.cpp:682 src/libslic3r/PrintConfig.cpp:706 #: src/libslic3r/PrintConfig.cpp:1058 src/libslic3r/PrintConfig.cpp:1072 #: src/libslic3r/PrintConfig.cpp:1109 src/libslic3r/PrintConfig.cpp:1345 #: src/libslic3r/PrintConfig.cpp:1355 src/libslic3r/PrintConfig.cpp:1422 #: src/libslic3r/PrintConfig.cpp:1441 src/libslic3r/PrintConfig.cpp:1460 #: src/libslic3r/PrintConfig.cpp:2266 src/libslic3r/PrintConfig.cpp:2283 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:334 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:337 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:348 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:351 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:307 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28 #: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/ExtrusionEntity.cpp:311 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1313 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1315 msgid "SLA print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69 #: src/slic3r/GUI/ConfigWizard.cpp:749 src/slic3r/GUI/ConfigWizard.cpp:769 #: src/slic3r/GUI/ConfigWizard.cpp:2673 src/slic3r/GUI/GUI.cpp:340 #: src/slic3r/GUI/Plater.cpp:742 src/libslic3r/Preset.cpp:1316 msgid "SLA material" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1317 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1353 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:258 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:262 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:326 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:326 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:327 src/slic3r/GUI/ConfigWizard.cpp:645 #: src/slic3r/GUI/Tab.cpp:3742 src/slic3r/GUI/UnsavedChangesDialog.cpp:1157 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:328 src/slic3r/GUI/ConfigWizard.cpp:646 #: src/slic3r/GUI/DoubleSlider.cpp:2010 src/slic3r/GUI/Plater.cpp:388 #: src/slic3r/GUI/Plater.cpp:533 src/libslic3r/PrintConfig.cpp:1246 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:480 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:482 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:484 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:486 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:491 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:494 msgid "" "Perform desktop integration (Sets this binary to be searchable by the " "system)." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:546 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:634 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:636 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:637 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:714 src/slic3r/GUI/ConfigWizard.cpp:882 #: src/slic3r/GUI/ConfigWizard.cpp:942 src/slic3r/GUI/ConfigWizard.cpp:1078 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:746 msgid "" "%1% marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:746 src/slic3r/GUI/ConfigWizard.cpp:2028 #: src/slic3r/GUI/ConfigWizard.cpp:2681 src/slic3r/GUI/ConfigWizard.cpp:2853 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:746 src/slic3r/GUI/ConfigWizard.cpp:2681 msgid "SLA materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:749 msgid "All installed printers are compatible with the selected %1%." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:749 src/slic3r/GUI/ConfigWizard.cpp:769 #: src/libslic3r/Preset.cpp:1314 msgid "filament" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:769 msgid "" "Only the following installed printers are compatible with the selected %1%:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1165 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1165 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1167 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1169 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1196 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1196 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1204 src/slic3r/GUI/Preferences.cpp:112 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1208 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1214 src/slic3r/GUI/Preferences.cpp:145 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1218 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1221 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1226 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1233 src/slic3r/GUI/GUI_Factories.cpp:720 #: src/slic3r/GUI/Plater.cpp:3422 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1236 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1240 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1249 msgid "Files association" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1251 src/slic3r/GUI/Preferences.cpp:129 msgid "Associate .3mf files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1252 src/slic3r/GUI/Preferences.cpp:136 msgid "Associate .stl files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1262 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1264 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1269 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1270 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1271 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1277 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1278 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1312 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1316 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1347 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1347 src/slic3r/GUI/Tab.cpp:2290 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1351 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1386 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1389 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1423 src/slic3r/GUI/Field.cpp:255 #: src/slic3r/GUI/Field.cpp:314 src/slic3r/GUI/Field.cpp:1554 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:429 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1447 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1447 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1462 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1465 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1475 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1476 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1479 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1537 msgid "Nozzle and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1537 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1553 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1554 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1557 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1558 src/slic3r/GUI/ConfigWizard.cpp:1572 #: src/libslic3r/PrintConfig.cpp:384 src/libslic3r/PrintConfig.cpp:1169 #: src/libslic3r/PrintConfig.cpp:1221 src/libslic3r/PrintConfig.cpp:2739 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1567 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1568 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1571 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2028 src/slic3r/GUI/ConfigWizard.cpp:2855 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2082 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2087 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2395 src/slic3r/GUI/DoubleSlider.cpp:2487 #: src/slic3r/GUI/DoubleSlider.cpp:2508 src/slic3r/GUI/GUI.cpp:232 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2416 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2420 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2434 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2438 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2480 src/slic3r/GUI/GUI_App.cpp:2471 msgid "Configuration is editing from ConfigWizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2523 msgid "All user presets will be deleted." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2553 msgid "New vendor was installed and one of its printer will be activated" msgid_plural "" "New vendors were installed and one of theirs printer will be activated" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/ConfigWizard.cpp:2582 msgid "Continue with applying configuration changes?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2648 msgid "A new Printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2653 msgid "Some Printers were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2673 msgid "A new %1% was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2673 src/slic3r/GUI/GCodeViewer.cpp:3972 #: src/slic3r/GUI/GCodeViewer.cpp:3998 src/slic3r/GUI/GUI.cpp:339 #: src/slic3r/GUI/Plater.cpp:740 src/slic3r/GUI/Tab.cpp:1894 #: src/slic3r/GUI/Tab.cpp:1895 msgid "Filament" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2681 msgid "Some %1% were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2725 msgid "Custom printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2810 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2813 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2814 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2815 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2816 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:490 #: src/slic3r/GUI/FirmwareDialog.cpp:153 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:215 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:243 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:82 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:878 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2835 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2838 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2853 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2853 src/slic3r/GUI/ConfigWizard.cpp:2855 #: src/slic3r/GUI/GUI_ObjectList.cpp:3771 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2855 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2976 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2977 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2979 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2980 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232 msgid "" "Performing desktop integration failed - boost::filesystem::canonical did not " "return appimage path." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243 msgid "Performing desktop integration failed - Could not find executable." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:378 msgid "" "Performing desktop integration failed - could not find applications " "directory." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:419 msgid "" "Performing desktop integration failed - could not create Gcodeviewer desktop " "file. PrusaSlicer desktop file was probably created successfully." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459 #: src/slic3r/GUI/GUI_App.cpp:1825 msgid "Desktop Integration" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:466 msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:480 msgid "Perform" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:486 #: src/slic3r/GUI/GLCanvas3D.cpp:4675 src/slic3r/GUI/KBShortcutsDialog.cpp:97 #: src/slic3r/GUI/MainFrame.cpp:1341 msgid "Undo" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:101 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1371 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1373 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1377 src/slic3r/GUI/DoubleSlider.cpp:2220 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1380 #, possible-c-format msgid "" "Jump to height %s\n" "Set ruler mode\n" "or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1383 #, possible-c-format msgid "" "Jump to height %s\n" "or Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1388 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1390 msgid "This is wipe tower layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1400 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1404 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1418 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1420 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1422 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1423 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1425 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1426 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1432 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1446 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1447 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1449 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1451 msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1453 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1460 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1462 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1465 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1468 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1471 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1476 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1478 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1479 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1582 src/slic3r/GUI/DoubleSlider.cpp:1613 #: src/slic3r/GUI/GUI_Factories.cpp:772 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1583 src/slic3r/GUI/GUI_Factories.cpp:773 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1592 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1592 src/slic3r/GUI/GUI_Factories.cpp:734 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1593 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1595 src/slic3r/GUI/GUI_Factories.cpp:781 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1614 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1622 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1623 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1948 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1959 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1963 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1966 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1984 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1985 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1986 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1992 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1993 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1994 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1995 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2005 src/slic3r/GUI/DoubleSlider.cpp:2220 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2010 msgid "Hide ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2014 msgid "Show object height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2014 msgid "Show object height on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2018 msgid "Show estimated print time" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2018 msgid "Show estimated print time on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2022 msgid "Ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2022 msgid "Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2027 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2031 msgid "Set auto color changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2040 msgid "This action will cause deletion of all ticks on vertical slider." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2041 src/slic3r/GUI/Tab.cpp:1305 msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2042 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1124 src/slic3r/GUI/GUI.cpp:245 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:640 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:670 #: src/slic3r/GUI/WipeTowerDialog.cpp:58 src/slic3r/GUI/WipeTowerDialog.cpp:443 msgid "Warning" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2181 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2182 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2203 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2204 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2219 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2219 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2480 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2481 src/slic3r/GUI/DoubleSlider.cpp:2497 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2483 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2484 src/slic3r/GUI/DoubleSlider.cpp:2505 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2498 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2501 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2503 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2504 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:320 src/slic3r/GUI/GUI_ObjectList.cpp:520 #: src/slic3r/GUI/GUI_ObjectList.cpp:532 src/slic3r/GUI/GUI_ObjectList.cpp:968 #: src/slic3r/GUI/GUI_ObjectList.cpp:1952 #: src/slic3r/GUI/GUI_ObjectList.cpp:4294 #: src/slic3r/GUI/ObjectDataViewModel.cpp:250 #: src/slic3r/GUI/ObjectDataViewModel.cpp:352 #: src/slic3r/GUI/ObjectDataViewModel.cpp:376 #: src/slic3r/GUI/ObjectDataViewModel.cpp:607 src/libslic3r/PrintConfig.cpp:762 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60 #: src/libslic3r/PrintConfig.cpp:628 src/libslic3r/PrintConfig.cpp:1358 #: src/libslic3r/PrintConfig.cpp:2049 src/libslic3r/PrintConfig.cpp:2212 #: src/libslic3r/PrintConfig.cpp:2288 src/libslic3r/PrintConfig.cpp:2538 #: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2604 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166 msgid "If enabled, random sequence of the selected extruders will be used." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174 msgid "If enabled, a repetition of the next random color will be allowed." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:190 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:193 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:807 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1070 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1082 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:226 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:266 #, possible-c-format msgid "" "Input value is out of range\n" "Are you sure that %s is a correct value and that you want to continue?" msgstr "" #: src/slic3r/GUI/Field.cpp:269 src/slic3r/GUI/Field.cpp:334 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/Field.cpp:282 src/slic3r/GUI/Field.cpp:381 #: src/slic3r/GUI/Field.cpp:1566 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:330 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:388 msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:154 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:201 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:285 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:286 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:334 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:421 src/slic3r/GUI/FirmwareDialog.cpp:456 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:438 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:550 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:651 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:653 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:788 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:813 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:816 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:297 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:372 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:818 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:828 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:831 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:832 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:863 #: src/slic3r/GUI/Mouse3DController.cpp:543 #: src/slic3r/GUI/PrintHostDialogs.cpp:244 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:111 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:916 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:917 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:920 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:69 msgid "Shapes Gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:76 msgid "Select shape from the gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:98 msgid "Add to bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:99 msgid "Add selected shape(s) to the bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:123 msgid "Add" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:123 msgid "Add one or more custom shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:124 src/slic3r/GUI/GLCanvas3D.cpp:4466 #: src/slic3r/GUI/GUI_Factories.cpp:444 src/slic3r/GUI/Tab.cpp:3660 msgid "Delete" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:124 msgid "Delete one or more custom shape. You can't delete system shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:125 msgid "Replace PNG" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:125 msgid "Replace PNG for custom shape. You can't raplace PNG for system shape" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:395 msgid "Choose one or more files (STL, OBJ):" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:435 msgid "" "It looks like selected %1%-file has an error or is destructed.\n" "We can't load this file" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:446 msgid "Choose one PNG file:" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:459 msgid "Replacing of the PNG" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:524 src/slic3r/GUI/GalleryDialog.cpp:529 msgid "Loading of the \"%1%\"" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:267 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1539 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1610 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2028 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3318 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3318 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3448 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3454 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3462 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3462 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3512 src/slic3r/GUI/GCodeViewer.cpp:3513 #: src/slic3r/GUI/GCodeViewer.cpp:3562 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3523 src/slic3r/GUI/GCodeViewer.cpp:3562 #: src/slic3r/GUI/GUI_Preview.cpp:216 src/slic3r/GUI/GUI_Preview.cpp:958 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3523 src/slic3r/GUI/GCodeViewer.cpp:3562 #: src/slic3r/GUI/RammingChart.cpp:90 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3562 src/slic3r/GUI/GCodeViewer.cpp:3573 #: src/slic3r/GUI/GCodeViewer.cpp:3834 msgid "Used filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3565 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3566 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3567 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3568 msgid "Fan Speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3569 msgid "Temperature (°C)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3570 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3573 src/slic3r/GUI/GUI_Preview.cpp:223 #: src/slic3r/GUI/GUI_Preview.cpp:958 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3576 src/slic3r/GUI/GUI_Preview.cpp:224 #: src/slic3r/GUI/GUI_Preview.cpp:957 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3614 src/slic3r/GUI/GCodeViewer.cpp:3660 #: src/slic3r/GUI/GCodeViewer.cpp:3665 src/slic3r/GUI/GUI_ObjectList.cpp:312 #: src/slic3r/GUI/wxExtensions.cpp:535 src/libslic3r/PrintConfig.cpp:757 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3637 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3660 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3759 src/slic3r/GUI/GCodeViewer.cpp:3815 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3778 src/slic3r/GUI/GCodeViewer.cpp:3813 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3814 src/slic3r/GUI/GCodeViewer.cpp:3848 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3831 src/slic3r/GUI/GCodeViewer.cpp:3834 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3831 src/slic3r/GUI/GCodeViewer.cpp:3834 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3831 src/slic3r/GUI/GCodeViewer.cpp:3834 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3877 src/slic3r/GUI/GUI_Preview.cpp:1049 #: src/libslic3r/PrintConfig.cpp:2832 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3880 msgid "Movement" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3881 msgid "Extrusion" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3882 src/slic3r/GUI/Tab.cpp:1794 #: src/slic3r/GUI/Tab.cpp:2733 msgid "Retraction" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3899 src/slic3r/GUI/GCodeViewer.cpp:3902 #: src/slic3r/GUI/GUI_Preview.cpp:1050 msgid "Wipe" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3938 src/slic3r/GUI/GUI_Preview.cpp:256 #: src/slic3r/GUI/GUI_Preview.cpp:271 msgid "Options" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3941 src/slic3r/GUI/GUI_Preview.cpp:1051 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3942 src/slic3r/GUI/GUI_Preview.cpp:1052 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3943 src/slic3r/GUI/GUI_Preview.cpp:1053 msgid "Seams" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3944 src/slic3r/GUI/GUI_Preview.cpp:1054 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3945 src/slic3r/GUI/GUI_Preview.cpp:1055 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3946 src/slic3r/GUI/GUI_Preview.cpp:1056 msgid "Print pauses" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3947 src/slic3r/GUI/GUI_Preview.cpp:1057 msgid "Custom G-codes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3967 src/slic3r/GUI/GCodeViewer.cpp:3986 #: src/slic3r/GUI/GUI.cpp:341 src/slic3r/GUI/Plater.cpp:743 #: src/libslic3r/PrintConfig.cpp:289 msgid "Printer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3969 src/slic3r/GUI/GCodeViewer.cpp:3991 #: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:739 msgid "Print settings" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4011 msgid "Estimated printing times" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4030 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4031 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4038 src/libslic3r/PrintConfig.cpp:1147 #: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1175 #: src/libslic3r/PrintConfig.cpp:1217 msgid "First layer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4039 msgid "Total" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4069 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:4073 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:218 src/slic3r/GUI/GLCanvas3D.cpp:4613 #: src/slic3r/GUI/ObjectDataViewModel.cpp:53 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:220 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:222 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:224 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:226 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:228 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:230 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:232 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:234 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:236 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:238 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:241 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:247 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:250 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:261 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:267 src/libslic3r/PrintConfig.cpp:781 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:277 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:286 src/slic3r/GUI/GLCanvas3D.cpp:4033 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:552 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:667 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1259 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1267 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1275 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1684 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2541 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:560 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2623 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:562 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3223 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3743 src/slic3r/GUI/GLCanvas3D.cpp:4574 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3744 src/slic3r/GUI/GLCanvas3D.cpp:4574 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3745 src/slic3r/GUI/GLCanvas3D.cpp:4575 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3745 src/slic3r/GUI/GLCanvas3D.cpp:4575 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3746 src/slic3r/GUI/GLCanvas3D.cpp:4576 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3893 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3893 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3913 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3913 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3933 src/slic3r/GUI/GLCanvas3D.cpp:4592 #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 src/slic3r/GUI/Search.cpp:423 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3947 src/slic3r/GUI/GLCanvas3D.cpp:3955 #: src/slic3r/GUI/Search.cpp:429 msgid "Enter a search term" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3986 msgid "Arrange options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4016 msgid "Press %1%left mouse button to enter the exact value" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4018 msgid "Spacing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4025 msgid "Enable rotations (slow)" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4043 src/slic3r/GUI/GLCanvas3D.cpp:4484 #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Plater.cpp:1543 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4458 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4475 src/slic3r/GUI/KBShortcutsDialog.cpp:96 #: src/slic3r/GUI/Plater.cpp:5378 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4484 src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4484 msgid "Click right mouse button to show arrangement options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4506 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4515 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4527 src/slic3r/GUI/GUI_Factories.cpp:1081 #: src/slic3r/GUI/GUI_Factories.cpp:1105 src/slic3r/GUI/GUI_Factories.cpp:1116 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4538 src/slic3r/GUI/GUI_Factories.cpp:1084 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4551 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4561 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4675 src/slic3r/GUI/GLCanvas3D.cpp:4714 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4698 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4714 src/slic3r/GUI/KBShortcutsDialog.cpp:98 #: src/slic3r/GUI/MainFrame.cpp:1344 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4736 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6358 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6359 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6360 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6361 msgid "Some objects are not visible during editing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6363 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6437 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6452 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4165 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:321 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:410 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:479 msgid "in" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:196 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:201 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:32 #: src/slic3r/GUI/ObjectDataViewModel.cpp:49 msgid "Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:41 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Brush size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 msgid "Brush shape" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:373 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:368 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:281 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:125 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43 #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 msgid "Highlight by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:169 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:507 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:125 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:196 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:441 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:475 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:151 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:214 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:398 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:168 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:228 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:412 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:182 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:262 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:500 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:215 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:303 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:304 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:371 msgid "Add supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33 #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:57 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34 #: src/libslic3r/PrintConfig.cpp:3652 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:286 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:402 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:605 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:682 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:776 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:826 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:27 msgid "" "Your printer has more extruders than the multi-material painting gizmo " "supports. For this reason, only the first %1% extruders will be able to be " "used for painting." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46 #: src/slic3r/GUI/ObjectDataViewModel.cpp:51 msgid "Multimaterial painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118 msgid "First color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:120 msgid "Second color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:696 msgid "Remove painted color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123 msgid "Remove all painted areas" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126 msgid "Pointer" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:128 msgid "Tool type" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:129 msgid "Brush" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:130 msgid "Smart fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:131 msgid "Bucket fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:133 msgid "Smart fill angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:342 msgid "Paints facets according to the chosen painting brush." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:360 msgid "" "Paints neighboring facets whose relative angle is less or equal to set angle." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:378 msgid "Paints neighboring facets that have the same color." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:426 msgid "Paints only one facet." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:446 msgid "Split triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:451 msgid "Split bigger facets into smaller ones while the object is painted." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:699 msgid "Painted using: Extruder %1%" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:55 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:466 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:544 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:579 #: src/libslic3r/PrintConfig.cpp:4219 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:505 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:517 msgid "Choose goal" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:538 msgid "Optimize" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:217 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:564 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:580 #: src/libslic3r/PrintConfig.cpp:4234 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:284 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:286 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52 msgid "Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:28 msgid "Mesh name" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:29 #: src/libslic3r/PrintConfig.cpp:1131 msgid "Triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:30 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:224 #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4375 #: src/slic3r/GUI/Tab.cpp:2753 msgid "Preview" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:31 msgid "Detail level" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:32 msgid "Decimate ratio" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:53 msgid "Simplify" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:153 msgid "Extra high" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:154 msgid "High" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:155 msgid "Medium" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:156 msgid "Low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:157 msgid "Extra low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:206 #, possible-c-format msgid "%d triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:209 msgid "Show wireframe" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:230 msgid "Apply" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:249 #, possible-c-format msgid "Process %d / 100" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:288 msgid "Model simplification has been canceled" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295 msgid "Simplify " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:372 msgid "ERROR: Wait until Simplification ends or Cancel process." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46 #: src/libslic3r/PrintConfig.cpp:3482 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:372 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:513 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:693 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:761 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:867 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:888 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:889 msgid "Save support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:949 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1042 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1122 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1123 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1177 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1188 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1206 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1209 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1206 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1207 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1207 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1208 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1208 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1209 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:196 msgid "" "ERROR: Please close all manipulators available from the left toolbar first" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:561 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:673 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1260 msgid "" "You are currently editing SLA support points. Please, apply or discard your " "changes first." msgstr "" #: src/slic3r/GUI/GUI.cpp:207 msgid "Internal error when changing value for %1%: %2%" msgstr "" #: src/slic3r/GUI/GUI.cpp:292 msgid "Undefined" msgstr "" #: src/slic3r/GUI/GUI.cpp:317 msgid "%1% was substituted with %2%" msgstr "" #: src/slic3r/GUI/GUI.cpp:326 msgid "" "Most likely the configuration was produced by a newer version of PrusaSlicer " "or by some PrusaSlicer fork." msgstr "" #: src/slic3r/GUI/GUI.cpp:327 msgid "The following values were substituted:" msgstr "" #: src/slic3r/GUI/GUI.cpp:328 msgid "Review the substitutions and adjust them if needed." msgstr "" #: src/slic3r/GUI/GUI.cpp:338 src/slic3r/GUI/Plater.cpp:741 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/GUI.cpp:342 src/slic3r/GUI/PhysicalPrinterDialog.cpp:157 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/GUI.cpp:355 msgid "" "Configuration bundle was loaded, however some configuration values were not " "recognized." msgstr "" #: src/slic3r/GUI/GUI.cpp:365 msgid "" "Configuration file \"%1%\" was loaded, however some configuration values " "were not recognized." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:259 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:260 msgid "Developed by Prusa Research." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:262 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:263 msgid "Artwork model by M Boyer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:404 msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " "(according to XDG Base Directory Specification) to \n" "%2%.\n" "\n" "This directory did not exist yet (maybe you run the new version for the " "first time).\n" "However, an old %1% configuration directory was detected in \n" "%3%.\n" "\n" "Consider moving the contents of the old directory to the new location in " "order to access your profiles, etc.\n" "Note that if you decide to downgrade %1% in future, it will use the old " "location again.\n" "\n" "What do you want to do now?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:412 #, possible-c-format msgid "%s - BREAKING CHANGE" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:414 msgid "Quit, I will move my data now" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:414 msgid "Start the application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:604 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:607 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:611 msgid "" "PrusaSlicer has encountered a localization error. Please report to " "PrusaSlicer team, what language was active and in which scenario this issue " "happened. Thank you.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:614 msgid "Critical error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:619 msgid "Internal error: %1%" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:778 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:784 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:847 #, possible-c-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:849 src/slic3r/GUI/GUI_App.cpp:2647 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:888 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:891 msgid "Loading configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:953 msgid "Preparing settings tabs" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1304 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1308 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" "Settings will be available in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1310 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1314 src/slic3r/GUI/PhysicalPrinterDialog.cpp:717 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/GUI_App.cpp:1338 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1341 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1346 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1439 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1451 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1463 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1474 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1613 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1613 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1762 msgid "modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1816 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1820 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1820 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1821 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1821 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1822 msgid "Check for updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1822 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1829 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1835 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1840 src/slic3r/GUI/wxExtensions.cpp:706 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1840 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1842 src/slic3r/GUI/wxExtensions.cpp:708 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1842 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1843 src/slic3r/GUI/wxExtensions.cpp:709 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1843 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1848 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1848 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1851 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1854 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1854 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1874 msgid "Taking a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1875 msgid "" "Some presets are modified and the unsaved changes will not be captured by " "the configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1876 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1892 msgid "Loading a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1901 msgid "Continue to activate a configuration snapshot %1%?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1915 msgid "Failed to activate configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1934 msgid "Restart application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1968 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1971 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1973 src/slic3r/GUI/Preferences.cpp:440 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2000 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2117 src/slic3r/GUI/GUI_App.cpp:2178 msgid "The preset modifications are successfully saved" msgid_plural "The presets modifications are successfully saved" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_App.cpp:2181 msgid "For new project all modifications will be reseted" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2219 msgid "Loading a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2222 msgid "Project is loading" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2222 msgid "Loading a new project while some presets are modified." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2241 msgid "The uploads are still ongoing" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2241 msgid "Stop them and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2245 msgid "Ongoing uploads" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2446 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2447 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224 #: src/slic3r/GUI/Plater.cpp:2296 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2496 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2646 msgid "Should we open this hyperlink in your default browser?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2646 msgid "PrusaSlicer: Open hyperlink" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:57 src/slic3r/GUI/GUI_Init.cpp:60 msgid "PrusaSlicer GUI initialization failed" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:60 msgid "Fatal error, exception catched: %1%" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127 #: src/libslic3r/PrintConfig.cpp:254 src/libslic3r/PrintConfig.cpp:371 #: src/libslic3r/PrintConfig.cpp:413 src/libslic3r/PrintConfig.cpp:422 #: src/libslic3r/PrintConfig.cpp:674 src/libslic3r/PrintConfig.cpp:740 #: src/libslic3r/PrintConfig.cpp:748 src/libslic3r/PrintConfig.cpp:1189 #: src/libslic3r/PrintConfig.cpp:1272 src/libslic3r/PrintConfig.cpp:1488 #: src/libslic3r/PrintConfig.cpp:1878 src/libslic3r/PrintConfig.cpp:1944 #: src/libslic3r/PrintConfig.cpp:2166 src/libslic3r/PrintConfig.cpp:2747 #: src/libslic3r/PrintConfig.cpp:2754 src/libslic3r/PrintConfig.cpp:2813 #: src/libslic3r/PrintConfig.cpp:2822 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131 #: src/slic3r/GUI/GUI_Preview.cpp:248 src/slic3r/GUI/Tab.cpp:1532 #: src/slic3r/GUI/Tab.cpp:1534 src/libslic3r/ExtrusionEntity.cpp:322 #: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:636 #: src/libslic3r/PrintConfig.cpp:2009 src/libslic3r/PrintConfig.cpp:2018 #: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/PrintConfig.cpp:2037 #: src/libslic3r/PrintConfig.cpp:2046 src/libslic3r/PrintConfig.cpp:2455 #: src/libslic3r/PrintConfig.cpp:2461 src/libslic3r/PrintConfig.cpp:2469 #: src/libslic3r/PrintConfig.cpp:2481 src/libslic3r/PrintConfig.cpp:2491 #: src/libslic3r/PrintConfig.cpp:2499 src/libslic3r/PrintConfig.cpp:2517 #: src/libslic3r/PrintConfig.cpp:2533 src/libslic3r/PrintConfig.cpp:2554 #: src/libslic3r/PrintConfig.cpp:2566 src/libslic3r/PrintConfig.cpp:2583 #: src/libslic3r/PrintConfig.cpp:2601 src/libslic3r/PrintConfig.cpp:2615 #: src/libslic3r/PrintConfig.cpp:2625 src/libslic3r/PrintConfig.cpp:2634 #: src/libslic3r/PrintConfig.cpp:2645 src/libslic3r/PrintConfig.cpp:2659 #: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:2683 #: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2693 #: src/libslic3r/PrintConfig.cpp:2707 src/libslic3r/PrintConfig.cpp:2715 #: src/libslic3r/PrintConfig.cpp:2729 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135 #: src/libslic3r/PrintConfig.cpp:2949 src/libslic3r/PrintConfig.cpp:2957 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:65 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/GUI_Preview.cpp:244 #: src/slic3r/GUI/Tab.cpp:1500 src/libslic3r/ExtrusionEntity.cpp:318 #: src/libslic3r/ExtrusionEntity.cpp:346 src/libslic3r/PrintConfig.cpp:1504 #: src/libslic3r/PrintConfig.cpp:1510 src/libslic3r/PrintConfig.cpp:1524 #: src/libslic3r/PrintConfig.cpp:1534 src/libslic3r/PrintConfig.cpp:1542 #: src/libslic3r/PrintConfig.cpp:1544 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1238 #: src/libslic3r/PrintConfig.cpp:1239 src/libslic3r/PrintConfig.cpp:1254 #: src/libslic3r/PrintConfig.cpp:1263 msgid "Fuzzy Skin" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/GUI_Preview.cpp:219 #: src/slic3r/GUI/Tab.cpp:1566 src/libslic3r/PrintConfig.cpp:473 #: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:1279 #: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:1543 #: src/libslic3r/PrintConfig.cpp:1934 src/libslic3r/PrintConfig.cpp:2254 #: src/libslic3r/PrintConfig.cpp:2306 src/libslic3r/PrintConfig.cpp:2798 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1605 #: src/slic3r/GUI/Tab.cpp:2228 src/libslic3r/PrintConfig.cpp:758 #: src/libslic3r/PrintConfig.cpp:1415 src/libslic3r/PrintConfig.cpp:1912 #: src/libslic3r/PrintConfig.cpp:2275 src/libslic3r/PrintConfig.cpp:2546 #: src/libslic3r/PrintConfig.cpp:2573 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:717 #: src/libslic3r/PrintConfig.cpp:826 src/libslic3r/PrintConfig.cpp:1176 #: src/libslic3r/PrintConfig.cpp:1423 src/libslic3r/PrintConfig.cpp:1921 #: src/libslic3r/PrintConfig.cpp:2295 src/libslic3r/PrintConfig.cpp:2555 #: src/libslic3r/PrintConfig.cpp:2786 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1518 #: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:494 #: src/libslic3r/PrintConfig.cpp:510 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1478 #: src/slic3r/GUI/Tab.cpp:1510 src/slic3r/GUI/Tab.cpp:1627 #: src/slic3r/GUI/Tab.cpp:1631 src/slic3r/GUI/Tab.cpp:1955 #: src/slic3r/GUI/Tab.cpp:2322 src/slic3r/GUI/Tab.cpp:4334 #: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:461 #: src/libslic3r/PrintConfig.cpp:1366 src/libslic3r/PrintConfig.cpp:1450 #: src/libslic3r/PrintConfig.cpp:1497 src/libslic3r/PrintConfig.cpp:2431 #: src/libslic3r/PrintConfig.cpp:2441 src/libslic3r/PrintConfig.cpp:2973 #: src/libslic3r/PrintConfig.cpp:3145 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:384 #: src/slic3r/GUI/Tab.cpp:4268 src/slic3r/GUI/Tab.cpp:4269 #: src/libslic3r/PrintConfig.cpp:3311 src/libslic3r/PrintConfig.cpp:3318 #: src/libslic3r/PrintConfig.cpp:3327 src/libslic3r/PrintConfig.cpp:3336 #: src/libslic3r/PrintConfig.cpp:3346 src/libslic3r/PrintConfig.cpp:3356 #: src/libslic3r/PrintConfig.cpp:3393 src/libslic3r/PrintConfig.cpp:3400 #: src/libslic3r/PrintConfig.cpp:3411 src/libslic3r/PrintConfig.cpp:3421 #: src/libslic3r/PrintConfig.cpp:3430 src/libslic3r/PrintConfig.cpp:3443 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3462 #: src/libslic3r/PrintConfig.cpp:3472 src/libslic3r/PrintConfig.cpp:3483 #: src/libslic3r/PrintConfig.cpp:3491 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:529 #: src/slic3r/GUI/Tab.cpp:4309 src/slic3r/GUI/Tab.cpp:4310 #: src/slic3r/GUI/Tab.cpp:4382 src/libslic3r/PrintConfig.cpp:3499 #: src/libslic3r/PrintConfig.cpp:3506 src/libslic3r/PrintConfig.cpp:3520 #: src/libslic3r/PrintConfig.cpp:3531 src/libslic3r/PrintConfig.cpp:3541 #: src/libslic3r/PrintConfig.cpp:3563 src/libslic3r/PrintConfig.cpp:3574 #: src/libslic3r/PrintConfig.cpp:3581 src/libslic3r/PrintConfig.cpp:3588 #: src/libslic3r/PrintConfig.cpp:3599 src/libslic3r/PrintConfig.cpp:3608 #: src/libslic3r/PrintConfig.cpp:3617 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4327 #: src/slic3r/GUI/Tab.cpp:4328 src/libslic3r/SLA/Hollowing.cpp:72 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3627 #: src/libslic3r/PrintConfig.cpp:3634 src/libslic3r/PrintConfig.cpp:3644 #: src/libslic3r/PrintConfig.cpp:3653 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:160 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:161 msgid "Add negative volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:162 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:163 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:164 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:300 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:407 src/slic3r/GUI/GUI_Factories.cpp:412 #: src/slic3r/GUI/GUI_Factories.cpp:550 src/slic3r/GUI/GUI_Factories.cpp:556 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:444 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:456 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 src/slic3r/GUI/GUI_Factories.cpp:497 #: src/slic3r/GUI/GUI_Factories.cpp:501 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:471 msgid "Gallery" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:520 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:529 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:620 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:630 src/slic3r/GUI/GUI_Factories.cpp:642 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:642 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:652 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:680 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:690 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:699 src/slic3r/GUI/Plater.cpp:3731 msgid "Simplify model" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:709 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:720 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:727 src/slic3r/GUI/Plater.cpp:3345 #: src/slic3r/GUI/Plater.cpp:3371 msgid "Replace with STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:727 msgid "Replace the selected volume with new STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:734 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:772 src/slic3r/Utils/Repetier.cpp:124 #: src/slic3r/Utils/Repetier.cpp:203 src/libslic3r/PrintConfig.cpp:601 #: src/libslic3r/PrintConfig.cpp:2667 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:789 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:789 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:828 src/slic3r/GUI/Plater.cpp:5518 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:829 src/slic3r/GUI/Plater.cpp:5519 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:830 src/slic3r/GUI/Plater.cpp:5520 msgid "Convert from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:831 src/slic3r/GUI/Plater.cpp:5520 msgid "Revert conversion from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:852 src/slic3r/GUI/GUI_ObjectList.cpp:2123 #: src/libslic3r/PrintConfig.cpp:4210 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:852 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:871 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:871 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:873 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:873 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:875 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:875 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:878 msgid "Mirror" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:878 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:894 src/slic3r/GUI/GUI_ObjectList.cpp:1677 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:930 msgid "To objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:930 src/slic3r/GUI/GUI_Factories.cpp:951 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:933 msgid "To parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:933 src/slic3r/GUI/GUI_Factories.cpp:972 msgid "Split the selected object into individual parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:937 src/slic3r/GUI/GUI_Factories.cpp:951 #: src/slic3r/GUI/GUI_Factories.cpp:972 src/libslic3r/PrintConfig.cpp:4239 msgid "Split" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:937 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1081 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1084 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1087 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1087 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1091 msgid "Fill bed with instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1091 msgid "Fill the remaining area of bed with instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:160 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:164 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:297 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:140 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:465 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:396 msgid "No errors detected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:405 #, possible-c-format msgid "Auto-repaired %1$d error" msgid_plural "Auto-repaired %1$d errors" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:409 #, possible-c-format msgid "%1$d degenerate facet" msgid_plural "%1$d degenerate facets" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:411 #, possible-c-format msgid "%1$d edge fixed" msgid_plural "%1$d edges fixed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:413 #, possible-c-format msgid "%1$d facet removed" msgid_plural "%1$d facets removed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:415 #, possible-c-format msgid "%1$d facet reversed" msgid_plural "%1$d facets reversed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:417 #, possible-c-format msgid "%1$d backwards edge" msgid_plural "%1$d backwards edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:420 #, possible-c-format msgid "Remaining %1$d open edge" msgid_plural "Remaining %1$d open edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:422 msgid "Remaning errors" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:423 #, possible-c-format msgid "%1$d open edge" msgid_plural "%1$d open edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:430 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:467 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:469 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:473 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:475 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:598 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:613 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:613 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1231 #: src/slic3r/GUI/GUI_ObjectList.cpp:3987 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1237 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1237 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1287 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1288 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1289 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1328 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1329 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1330 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1399 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1399 msgid "Load Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1437 #: src/slic3r/GUI/GUI_ObjectList.cpp:1496 src/slic3r/GUI/Plater.cpp:2251 msgid "Loading" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1444 #: src/slic3r/GUI/GUI_ObjectList.cpp:1527 src/slic3r/GUI/Plater.cpp:2268 msgid "Loading file" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1452 #: src/slic3r/GUI/GUI_ObjectList.cpp:1535 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1619 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1644 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1708 msgid "Add Shape from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1708 msgid "Add Shapes from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1816 msgid "Remove paint-on supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1823 msgid "Remove paint-on seam" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1830 msgid "Remove Multi Material painting" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1836 msgid "Shift objects to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1842 msgid "Remove variable layer height" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1863 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1887 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1903 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1935 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1939 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1962 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1966 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1990 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1994 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2130 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2215 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2247 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2416 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2431 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2464 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2468 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2473 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2479 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2485 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2492 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2492 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2728 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2924 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3000 #: src/slic3r/GUI/GUI_ObjectList.cpp:3028 #: src/slic3r/GUI/GUI_ObjectList.cpp:3048 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3094 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3098 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3103 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3162 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3481 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3493 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3630 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3631 #: src/slic3r/GUI/GUI_ObjectList.cpp:3770 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3631 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3633 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3634 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3635 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3638 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3643 #: src/slic3r/GUI/GUI_ObjectList.cpp:3718 src/slic3r/GUI/Plater.cpp:151 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3765 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3770 msgid "Negative Volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3770 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3770 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3770 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3771 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3776 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4009 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4009 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4025 #: src/slic3r/GUI/GUI_ObjectList.cpp:4256 #: src/slic3r/GUI/SavePresetDialog.cpp:101 #: src/slic3r/GUI/SavePresetDialog.cpp:109 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4026 #: src/slic3r/GUI/GUI_ObjectList.cpp:4257 #: src/slic3r/GUI/SavePresetDialog.cpp:102 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4082 msgid "Repairing model" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4111 msgid "Fix through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4114 msgid "Fixing through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4145 msgid "Folowing model is repaired successfully" msgid_plural "Folowing models are repaired successfully" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4151 msgid "Folowing model repair failed" msgid_plural "Folowing models repair failed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4156 msgid "Repairing was canceled" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4159 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4279 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4419 msgid "Set Printable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4419 msgid "Set Unprintable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4421 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4421 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4422 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4422 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:56 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:85 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:57 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:86 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:61 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:142 src/libslic3r/GCode.cpp:522 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:203 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:523 #: src/slic3r/GUI/Mouse3DController.cpp:478 #: src/slic3r/GUI/Mouse3DController.cpp:499 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:251 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:285 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:364 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:386 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:401 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:415 msgid "Inches" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:524 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:642 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:819 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:850 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:915 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:948 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:951 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:63 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:99 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:105 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:158 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:210 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:217 src/libslic3r/PrintConfig.cpp:770 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:218 src/libslic3r/PrintConfig.cpp:2927 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:220 src/slic3r/GUI/Tab.cpp:1940 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/Tab.cpp:1915 msgid "Temperature" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:222 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:227 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/GUI_Preview.cpp:253 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:312 #: src/libslic3r/ExtrusionEntity.cpp:334 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:313 #: src/libslic3r/ExtrusionEntity.cpp:336 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:314 #: src/libslic3r/ExtrusionEntity.cpp:338 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:315 #: src/libslic3r/ExtrusionEntity.cpp:340 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:316 #: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2294 #: src/libslic3r/PrintConfig.cpp:2305 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:317 #: src/libslic3r/ExtrusionEntity.cpp:344 src/libslic3r/PrintConfig.cpp:2785 #: src/libslic3r/PrintConfig.cpp:2797 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:245 src/libslic3r/ExtrusionEntity.cpp:319 #: src/libslic3r/ExtrusionEntity.cpp:348 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:320 #: src/libslic3r/ExtrusionEntity.cpp:350 src/libslic3r/PrintConfig.cpp:1278 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:321 #: src/libslic3r/ExtrusionEntity.cpp:352 msgid "Skirt/Brim" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:249 src/libslic3r/ExtrusionEntity.cpp:323 #: src/libslic3r/ExtrusionEntity.cpp:356 src/libslic3r/PrintConfig.cpp:2633 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:250 src/slic3r/GUI/Tab.cpp:1616 #: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:358 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:731 msgid "NOTE:" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:731 msgid "Sliced object looks like the sign" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:732 msgid "Apply auto color change to print" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1058 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1059 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1060 msgid "Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:762 #: src/slic3r/GUI/HintNotification.cpp:788 #: src/slic3r/GUI/NotificationManager.cpp:399 #: src/slic3r/GUI/NotificationManager.cpp:416 msgid "More" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:903 msgid "Open Preferences." msgstr "" #: src/slic3r/GUI/HintNotification.cpp:995 msgid "Open Documentation in web browser." msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:848 src/slic3r/GUI/Search.cpp:467 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:849 src/slic3r/GUI/Search.cpp:460 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:851 src/slic3r/GUI/Search.cpp:462 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:170 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:179 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:203 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:249 #, possible-c-format msgid "" "Arrangement ignored the following objects which can't fit into a single " "bed:\n" "%s" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:123 msgid "Filling bed" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:134 msgid "Bed filling canceled." msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:135 msgid "Bed filling done." msgstr "" #: src/slic3r/GUI/Jobs/Job.cpp:108 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Jobs/PlaterJob.cpp:13 msgid "An unexpected error occured: " msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:59 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:77 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:78 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:36 msgid "Choose SLA archive:" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:40 msgid "Import file" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47 msgid "Import model and profile" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48 msgid "Import profile only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49 msgid "Import model only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60 msgid "Accurate" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61 msgid "Balanced" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:62 msgid "Quick" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:138 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:156 msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:162 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:163 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2295 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2297 msgid "Attention!" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1106 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:77 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:78 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:79 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:80 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:81 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:83 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:84 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:85 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:826 #: src/slic3r/GUI/Plater.cpp:6415 src/libslic3r/PrintConfig.cpp:4110 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6416 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:89 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:90 src/slic3r/GUI/Plater.cpp:809 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:91 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:93 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:94 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:95 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:99 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:100 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:102 #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:110 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 #: src/slic3r/GUI/PrintHostDialogs.cpp:200 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/MainFrame.cpp:75 #: src/slic3r/GUI/MainFrame.cpp:1419 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:16 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 #: src/slic3r/GUI/KBShortcutsDialog.cpp:248 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Gizmo FDM paint-on supports" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Gizmo FDM paint-on seam" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Gizmo Multi Material painting" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Minimize application" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:181 src/slic3r/GUI/MainFrame.cpp:284 #: src/slic3r/GUI/MainFrame.cpp:328 src/slic3r/GUI/MainFrame.cpp:440 #: src/slic3r/GUI/MainFrame.cpp:443 src/slic3r/GUI/MainFrame.cpp:465 #: src/slic3r/GUI/MainFrame.cpp:468 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:184 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "Gizmo move: Press to snap by 1mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:186 msgid "Gizmo scale: Press to snap by 5%" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Gizmo scale: Scale selection to fit print volume" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:188 msgid "Gizmo scale: Press to activate one direction scaling" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:189 msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "" "The following shortcuts are applicable when the specified gizmo is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 msgid "Set selected items as Ptrintable/Unprintable" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 msgid "Set default extruder for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 msgid "Set extruder number for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:201 msgid "Objects List" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 src/slic3r/GUI/MainFrame.cpp:1524 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 src/slic3r/GUI/MainFrame.cpp:1358 #: src/slic3r/GUI/MainFrame.cpp:1362 src/slic3r/GUI/MainFrame.cpp:1529 #: src/slic3r/GUI/MainFrame.cpp:1533 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 msgid "Vertical slider - Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Vertical slider - Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 msgid "Horizontal slider - Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 msgid "Horizontal slider - Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 msgid "On/Off one layer mode of the vertical slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 msgid "Show/Hide Legend and Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Show/Hide G-code window" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 msgid "Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 msgid "Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 msgid "Set upper thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 msgid "Set lower thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:238 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 #: src/slic3r/GUI/KBShortcutsDialog.cpp:240 #: src/slic3r/GUI/KBShortcutsDialog.cpp:250 #: src/slic3r/GUI/KBShortcutsDialog.cpp:251 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Vertical Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "" "The following shortcuts are applicable in G-code preview when the vertical " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:248 msgid "Set left thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "Set right thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "Horizontal Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:278 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:75 src/slic3r/GUI/MainFrame.cpp:89 #: src/slic3r/GUI/MainFrame.cpp:1419 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:91 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:1307 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:89 src/slic3r/GUI/MainFrame.cpp:1540 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:91 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:225 msgid "Closing PrusaSlicer. Current project is modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:232 msgid "PrusaSlicer is closing" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:232 msgid "Closing PrusaSlicer while some presets are modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:330 #: src/slic3r/GUI/Tab.hpp:376 src/slic3r/GUI/Tab.hpp:493 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:334 #: src/slic3r/GUI/MainFrame.cpp:2102 src/slic3r/GUI/MainFrame.cpp:2103 #: src/slic3r/GUI/Tab.hpp:478 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:332 #: src/slic3r/GUI/MainFrame.cpp:2102 src/slic3r/GUI/MainFrame.cpp:2103 #: src/slic3r/GUI/Tab.hpp:405 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:336 #: src/slic3r/GUI/Tab.hpp:446 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:627 src/slic3r/GUI/Plater.cpp:1597 #: src/slic3r/GUI/Plater.cpp:2656 msgid "Untitled" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:650 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1076 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1076 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1078 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1078 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1084 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1085 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1091 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1091 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1093 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1093 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1095 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1095 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1098 src/slic3r/GUI/MainFrame.cpp:1101 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1098 src/slic3r/GUI/MainFrame.cpp:1101 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1103 msgid "Show Tip of the day" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1103 msgid "" "Opens Tip of the day notification in bottom right corner or shows another " "tip if already opened." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1106 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1120 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1120 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1124 src/libslic3r/PrintConfig.cpp:2812 #: src/libslic3r/PrintConfig.cpp:2821 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1124 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1127 src/libslic3r/PrintConfig.cpp:412 #: src/libslic3r/PrintConfig.cpp:421 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1127 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1129 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1129 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1131 src/libslic3r/PrintConfig.cpp:2176 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1131 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1133 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1133 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1135 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1135 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1148 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1148 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1151 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1151 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1156 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1168 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1168 src/slic3r/GUI/MainFrame.cpp:1625 #: src/slic3r/GUI/PrintHostDialogs.cpp:348 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1193 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1193 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1197 src/slic3r/GUI/MainFrame.cpp:1199 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1197 src/slic3r/GUI/MainFrame.cpp:1199 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1207 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1207 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1211 msgid "Import STL (imperial units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1211 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1215 msgid "Import SL1 / SL1S archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1215 msgid "Load an SL1 / Sl1S archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1220 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1220 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1223 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1223 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1227 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1227 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1230 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1233 src/slic3r/GUI/MainFrame.cpp:1585 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1233 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1237 src/slic3r/GUI/MainFrame.cpp:1586 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1237 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1241 msgid "Export G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1241 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1245 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1245 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1248 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1248 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1256 src/slic3r/GUI/MainFrame.cpp:1537 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1256 src/slic3r/GUI/MainFrame.cpp:1537 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1260 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1260 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1263 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1263 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1266 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1266 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1269 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1271 msgid "Ejec&t SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1271 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1279 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1279 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1285 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1285 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1291 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1291 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1299 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1299 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1303 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1303 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1307 msgid "&G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1310 src/slic3r/GUI/MainFrame.cpp:1544 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1310 src/slic3r/GUI/MainFrame.cpp:1544 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1325 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1326 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1328 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1329 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1332 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1333 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1335 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1336 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1340 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1343 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1348 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1349 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1351 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1352 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1357 src/slic3r/GUI/MainFrame.cpp:1361 #: src/slic3r/GUI/MainFrame.cpp:1528 src/slic3r/GUI/MainFrame.cpp:1532 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1367 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1368 msgid "Search in settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1376 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1376 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1381 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1381 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1384 src/slic3r/GUI/MainFrame.cpp:1588 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1384 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1388 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1388 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1394 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1394 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1397 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1397 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1403 msgid "Modify Shapes Gallery" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1403 msgid "Open the dialog to modify shapes gallery" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1415 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1415 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1423 msgid "Compare presets" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1433 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1433 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1436 msgid "&Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1436 src/slic3r/GUI/Plater.cpp:2178 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1441 msgid "&Full screen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1441 msgid "Full screen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1456 src/slic3r/GUI/MainFrame.cpp:1559 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1457 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1458 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1459 src/slic3r/GUI/MainFrame.cpp:1560 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1462 src/slic3r/GUI/MainFrame.cpp:1563 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1524 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1540 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1585 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1586 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1588 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1612 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1624 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1631 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1631 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1632 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1667 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1667 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1667 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1679 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1688 src/slic3r/GUI/Plater.cpp:3134 #: src/slic3r/GUI/Plater.cpp:5928 src/slic3r/GUI/Tab.cpp:1648 #: src/slic3r/GUI/Tab.cpp:4335 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1690 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1713 msgid "%1% was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1716 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1732 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1742 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1753 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1753 src/libslic3r/PrintConfig.cpp:4215 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1767 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1784 msgid "Loading of a configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1786 src/slic3r/GUI/MainFrame.cpp:1851 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1815 msgid "Exporting configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1816 msgid "" "Some presets are modified and the unsaved changes will not be exported into " "configuration bundle." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1825 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1848 msgid "Loading of a configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1878 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:453 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:464 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:469 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:472 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:484 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:490 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:505 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:508 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:148 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:149 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:172 #, possible-c-format msgid "%s warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:173 #, possible-c-format msgid "%s has a warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:195 #, possible-c-format msgid "%s info" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:218 #, possible-c-format msgid "%s information" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:36 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:37 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:37 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:44 msgid "New version is available." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:44 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:47 msgid "" "You have just added a G-code for color change, but its value is empty.\n" "To export the G-code correctly, check the \"Color Change G-code\" in " "\"Printer Settings > Custom G-code\"" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:50 msgid "" "No color change event was added to the print. The print does not look like a " "sign." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:52 msgid "Desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:54 msgid "Desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:56 msgid "Undo desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:58 msgid "Undo desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:688 msgid "Open Folder." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:725 msgid "Eject drive" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:958 msgid "ERROR" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:963 msgid "CANCELED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:968 msgid "COMPLETED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1010 msgid "Cancel upload" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1069 msgid " Object was loaded with " msgid_plural " Objects were loaded with " msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1170 #: src/slic3r/GUI/NotificationManager.cpp:1184 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1170 #: src/slic3r/GUI/NotificationManager.cpp:1184 msgid "Export." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1184 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1508 #: src/slic3r/GUI/NotificationManager.cpp:1515 #: src/slic3r/GUI/NotificationManager.cpp:1531 #: src/slic3r/GUI/NotificationManager.cpp:1537 #: src/slic3r/GUI/NotificationManager.cpp:1608 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1520 #: src/slic3r/GUI/NotificationManager.cpp:1547 #: src/slic3r/GUI/NotificationManager.cpp:1555 #: src/slic3r/GUI/NotificationManager.cpp:1566 src/slic3r/GUI/Plater.cpp:3001 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1659 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:50 msgid "Paint-on seam" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:52 msgid "Sinking" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:94 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:98 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4179 #: src/slic3r/GUI/Tab.cpp:4264 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:134 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:248 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:251 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:254 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw-renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:256 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:264 #, possible-c-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:333 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:333 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:83 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Descriptive name for the printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2179 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:268 msgid "Connection to printers connected via the print host failed." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:310 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:315 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337 msgid "Refresh Printers" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:374 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:404 #: src/libslic3r/PrintConfig.cpp:297 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:405 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:406 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:625 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:629 msgid "You should change the name of your printer device." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:637 msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:638 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:665 msgid "" "Following printer preset is duplicated:%1%The above preset for printer \"%2%" "\" will be used just once." msgid_plural "" "Following printer presets are duplicated:%1%The above presets for printer " "\"%2%\" will be used just once." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:715 msgid "It's not possible to delete the last related preset for the printer." msgstr "" #: src/slic3r/GUI/Plater.cpp:172 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:173 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:174 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:232 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:252 src/slic3r/GUI/Plater.cpp:1234 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:253 src/slic3r/GUI/Plater.cpp:1246 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:254 src/slic3r/GUI/Plater.cpp:1253 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:255 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:256 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:257 src/slic3r/GUI/Plater.cpp:1216 #: src/slic3r/GUI/Plater.cpp:1303 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:258 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:387 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:389 src/libslic3r/PrintConfig.cpp:2490 #: src/libslic3r/PrintConfig.cpp:3392 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:390 src/slic3r/GUI/Plater.cpp:518 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:391 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:423 src/slic3r/GUI/Tab.cpp:1527 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:425 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:433 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:532 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:534 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:535 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:807 src/slic3r/GUI/Plater.cpp:6416 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:827 src/slic3r/GUI/Plater.cpp:3134 #: src/slic3r/GUI/Plater.cpp:5931 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:993 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1165 msgid "%1% (%2$d shell)" msgid_plural "%1% (%2$d shells)" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1191 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1194 msgid "object" msgid_plural "objects" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1194 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1234 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1236 src/slic3r/GUI/Plater.cpp:1289 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1236 src/slic3r/GUI/Plater.cpp:1289 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1246 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1272 msgid "Filament at extruder %1%" msgstr "" #: src/slic3r/GUI/Plater.cpp:1278 msgid "(including spool)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1287 src/libslic3r/PrintConfig.cpp:1032 #: src/libslic3r/PrintConfig.cpp:3207 src/libslic3r/PrintConfig.cpp:3208 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1305 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1312 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1549 msgid "Fill bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:1555 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:1561 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:1599 msgid "Do you want to save the changes to \"%1%\"?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2052 #, possible-c-format msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2057 #, possible-c-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2076 src/slic3r/GUI/Plater.cpp:4996 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2177 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2355 msgid "" "The preset below was temporarily installed on active instance of PrusaSlicer" msgid_plural "" "The presets below were temporarily installed on active instance of " "PrusaSlicer" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2385 msgid "Failed loading file \"%1%\" due to an invalid configuration." msgstr "" #: src/slic3r/GUI/Plater.cpp:2408 #, possible-c-format msgid "" "The dimensions of the object from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer are millimeters. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer are millimeters. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2412 src/slic3r/GUI/Plater.cpp:2423 msgid "The object is too small" msgstr "" #: src/slic3r/GUI/Plater.cpp:2419 #, possible-c-format msgid "" "The dimensions of the object from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer are millimeters. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer are millimeters. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2432 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "should the file be loaded as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2435 src/slic3r/GUI/Plater.cpp:2490 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2443 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2444 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2464 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2487 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2606 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2607 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2684 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2691 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2697 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2703 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2800 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2811 msgid "Delete All Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2837 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2918 msgid "" "The selected object couldn't be split because it contains only one solid " "part." msgstr "" #: src/slic3r/GUI/Plater.cpp:2925 msgid "All non-solid parts (modifiers) were deleted" msgstr "" #: src/slic3r/GUI/Plater.cpp:2927 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2983 msgid "" "An object has custom support enforcers which will not be used because " "supports are disabled." msgstr "" #: src/slic3r/GUI/Plater.cpp:2985 msgid "Enable supports for enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:3115 src/slic3r/GUI/Plater.cpp:4078 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:3185 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3243 src/slic3r/GUI/Plater.cpp:3350 msgid "Replace from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3259 src/slic3r/GUI/Plater.cpp:3366 msgid "Unable to replace with more than one volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:3259 src/slic3r/GUI/Plater.cpp:3339 #: src/slic3r/GUI/Plater.cpp:3366 msgid "Error during replace" msgstr "" #: src/slic3r/GUI/Plater.cpp:3331 msgid "Please select the file to replace" msgstr "" #: src/slic3r/GUI/Plater.cpp:3339 msgid "File for the replace wasn't selected" msgstr "" #: src/slic3r/GUI/Plater.cpp:3501 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3533 src/slic3r/GUI/Plater.cpp:5122 msgid "The selected file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3534 msgid "differs from the original file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3534 msgid "Do you want to replace it" msgstr "" #: src/slic3r/GUI/Plater.cpp:3541 msgid "It is not allowed to change the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3541 msgid "Do you want to retry" msgstr "" #: src/slic3r/GUI/Plater.cpp:3565 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3667 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3672 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3690 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3724 msgid "" "Processing model '@object_name' with more than 1M triangles could be slow. " "It is highly recommend to reduce amount of triangles." msgstr "" #: src/slic3r/GUI/Plater.cpp:4032 msgid "There are active warnings concerning sliced models:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4043 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:4367 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4782 msgid "Undo / Redo is processing" msgstr "" #: src/slic3r/GUI/Plater.cpp:4784 msgid "" "Switching the printer technology from %1% to %2%.\n" "Some %1% presets were modified, which will be lost after switching the " "printer technology." msgstr "" #: src/slic3r/GUI/Plater.cpp:4980 msgid "Creating a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:4983 msgid "Creating a new project while some presets are modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:4984 msgid "You can keep presets modifications to the new project or discard them" msgstr "" #: src/slic3r/GUI/Plater.cpp:4985 msgid "" "You can keep presets modifications to the new project, discard them or save " "changes as new presets.\n" "Note, if changes will be saved than new project wouldn't keep them" msgstr "" #: src/slic3r/GUI/Plater.cpp:4991 msgid "New Project is creating" msgstr "" #: src/slic3r/GUI/Plater.cpp:5021 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5047 src/slic3r/GUI/Plater.cpp:5306 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5051 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5122 msgid "does not contain valid gcode." msgstr "" #: src/slic3r/GUI/Plater.cpp:5123 msgid "Error while loading .gcode file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5176 #, possible-c-format msgid "%s - Drop project file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5183 msgid "Open as project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5184 msgid "Import geometry only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5185 msgid "Import config only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5188 msgid "Select an action to apply to the file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5193 msgid "Action" msgstr "" #: src/slic3r/GUI/Plater.cpp:5209 msgid "Don't show again" msgstr "" #: src/slic3r/GUI/Plater.cpp:5250 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:5251 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5328 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:5333 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:5378 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5389 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5397 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5431 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5482 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5483 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5487 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:5560 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:5620 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5620 msgid "Save SL1 / SL1S file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5817 msgid "" "The plater is empty.\n" "Confirm you want to save the project ?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5817 msgid "Save project" msgstr "" #: src/slic3r/GUI/Plater.cpp:6415 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:6449 msgid "" "Custom supports, seams and multimaterial painting were removed after " "repairing the mesh." msgstr "" #: src/slic3r/GUI/Plater.cpp:6563 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:74 src/slic3r/GUI/Tab.cpp:2214 #: src/slic3r/GUI/Tab.cpp:2437 src/slic3r/GUI/Tab.cpp:2547 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:87 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:89 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:95 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:97 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:103 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:105 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:114 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:120 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:122 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:131 msgid "If enabled, sets PrusaSlicer as default application to open .3mf files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:138 msgid "If enabled, sets PrusaSlicer as default application to open .stl files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:147 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:152 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:154 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:160 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:162 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:168 msgid "Show drop project dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:170 msgid "" "When checked, whenever dragging and dropping a project file on the " "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" #: src/slic3r/GUI/Preferences.cpp:177 src/slic3r/GUI/Preferences.cpp:181 msgid "Allow just a single PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/Preferences.cpp:179 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:183 msgid "" "If this is enabled, when starting PrusaSlicer and another instance of the " "same PrusaSlicer is already running, that instance will be reactivated " "instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:189 msgid "Ask for unsaved changes when closing application or loading new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:191 msgid "" "Always ask for unsaved changes, when: \n" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" #: src/slic3r/GUI/Preferences.cpp:198 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:895 msgid "Ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:200 msgid "" "Always ask for unsaved changes when selecting new preset or resetting a " "preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:205 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:894 msgid "Ask for unsaved changes when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:207 msgid "Always ask for unsaved changes when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:214 msgid "Associate .gcode files to PrusaSlicer G-code Viewer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:216 msgid "" "If enabled, sets PrusaSlicer G-code Viewer as default application to open ." "gcode files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:224 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:226 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:234 src/slic3r/GUI/Preferences.cpp:236 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:242 msgid "Clear Undo / Redo stack on new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:244 msgid "" "Clear Undo / Redo stack on new project or when an existing project is loaded." msgstr "" #: src/slic3r/GUI/Preferences.cpp:250 msgid "Enable support for legacy 3DConnexion devices" msgstr "" #: src/slic3r/GUI/Preferences.cpp:252 msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" #: src/slic3r/GUI/Preferences.cpp:261 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:266 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:268 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:273 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:275 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:280 msgid "Reverse direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:282 msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:290 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:305 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:307 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer.If disabled, changes made using the sequential slider, in " "preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:314 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:316 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:321 msgid "Suppress to open hyperlink in browser" msgstr "" #: src/slic3r/GUI/Preferences.cpp:323 msgid "" "If enabled, the descriptions of configuration parameters in settings tabs " "wouldn't work as hyperlinks. If disabled, the descriptions of configuration " "parameters in settings tabs will work as hyperlinks." msgstr "" #: src/slic3r/GUI/Preferences.cpp:329 msgid "Use colors for axes values in Manipulation panel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:331 msgid "" "If enabled, the axes names and axes values will be colorized according to " "the axes colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:337 msgid "Order object volumes by types" msgstr "" #: src/slic3r/GUI/Preferences.cpp:339 msgid "" "If enabled, volumes will be always ordered inside the object. Correct order " "is Model Part, Negative Volume, Modifier, Support Blocker and Support " "Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " "Modifiers. But one of the model parts have to be on the first place." msgstr "" #: src/slic3r/GUI/Preferences.cpp:346 msgid "Use Dark color mode (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:348 msgid "" "If enabled, UI will use Dark mode colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:354 msgid "Set settings tabs as menu items (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:356 msgid "" "If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " "will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:363 msgid "Show \"Tip of the day\" notification after start" msgstr "" #: src/slic3r/GUI/Preferences.cpp:365 msgid "If enabled, useful hints are displayed at startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:370 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:372 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:391 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:396 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:398 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:436 msgid "Changes for the critical options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:438 msgid "" "Changing fo some options will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/Preferences.cpp:543 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:558 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:592 src/slic3r/GUI/Preferences.cpp:603 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:593 msgid "New layout, access via settings button in the top menu" msgstr "" #: src/slic3r/GUI/Preferences.cpp:594 src/slic3r/GUI/Preferences.cpp:604 msgid "Settings in non-modal window" msgstr "" #: src/slic3r/GUI/Preferences.cpp:612 msgid "Layout Options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:655 msgid "Text color Settings" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:249 #: src/slic3r/GUI/PresetComboBoxes.cpp:287 #: src/slic3r/GUI/PresetComboBoxes.cpp:778 #: src/slic3r/GUI/PresetComboBoxes.cpp:828 #: src/slic3r/GUI/PresetComboBoxes.cpp:968 #: src/slic3r/GUI/PresetComboBoxes.cpp:1012 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:291 #: src/slic3r/GUI/PresetComboBoxes.cpp:832 #: src/slic3r/GUI/PresetComboBoxes.cpp:1016 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:302 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:337 msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:340 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:601 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:691 #: src/slic3r/GUI/PresetComboBoxes.cpp:721 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:696 #: src/slic3r/GUI/PresetComboBoxes.cpp:726 src/slic3r/GUI/Tab.cpp:3168 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:710 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:714 src/slic3r/GUI/Tab.cpp:3168 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:717 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:843 #: src/slic3r/GUI/PresetComboBoxes.cpp:1030 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:867 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:869 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:871 #: src/slic3r/GUI/PresetComboBoxes.cpp:1054 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:32 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:39 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:49 msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:51 msgid "During the other layers, fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:51 msgid "Fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:53 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:55 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:58 msgid "During the other layers, fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:58 msgid "Fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:164 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:165 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:168 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:170 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:172 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:175 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:177 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:181 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:181 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:181 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:182 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:185 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:186 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:209 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:215 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:230 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:234 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:263 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:276 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:279 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:282 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:295 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:298 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:301 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:44 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:52 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:65 msgid "Group" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:97 #, possible-c-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:230 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:231 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:232 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:233 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:234 msgctxt "OfFile" msgid "Size" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:235 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:236 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:239 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:241 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:299 #: src/slic3r/GUI/PrintHostDialogs.cpp:346 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:347 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:349 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:350 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:351 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:399 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:29 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:114 #: src/libslic3r/PrintConfig.cpp:916 src/libslic3r/PrintConfig.cpp:960 #: src/libslic3r/PrintConfig.cpp:975 src/libslic3r/PrintConfig.cpp:3105 #: src/libslic3r/PrintConfig.cpp:3114 src/libslic3r/PrintConfig.cpp:3224 #: src/libslic3r/PrintConfig.cpp:3232 src/libslic3r/PrintConfig.cpp:3240 #: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3255 #: src/libslic3r/PrintConfig.cpp:3263 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:873 #: src/libslic3r/PrintConfig.cpp:1749 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:57 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:110 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:116 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:122 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:127 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:134 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:136 msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " "printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:137 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:142 msgid "The name cannot be empty." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:147 msgid "The name cannot start with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:152 msgid "The name cannot end with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:157 msgid "The name cannot be the same as a preset alias name." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:191 #: src/slic3r/GUI/SavePresetDialog.cpp:197 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:221 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:283 msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:322 msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:325 msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:326 msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:327 msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345 #: src/slic3r/GUI/Tab.cpp:2575 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345 #: src/slic3r/GUI/Tab.cpp:2569 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:166 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:207 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:239 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:258 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:276 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:295 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:392 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:417 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:952 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:103 msgid "Data to send" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:453 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:526 msgid "Send system info" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:485 msgid "" "This is the first time you are running %1%. We would like to ask you to send " "some of your system information to us. This will only happen once and we " "will not ask you to do this again (only after you upgrade to the next " "version)." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:489 msgid "" "If we know your hardware, operating system, etc., it will greatly help us in " "development and prioritization, because we will be able to focus our effort " "more efficiently and spend time on features that are needed the most." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:492 msgid "Is it safe?" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:494 msgid "" "We do not send any personal information nor anything that would allow us to " "identify you later. To detect duplicate entries, a unique number derived " "from your system is sent, but the source information cannot be " "reconstructed. Apart from that, only general data about your OS, hardware " "and OpenGL installation are sent. PrusaSlicer is open source, if you want to " "inspect the code actually performing the communication, see %1%." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:501 msgid "Show verbatim data that will be sent" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:524 msgid "Ask me next time" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:525 msgid "Do not send anything" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:600 msgid "System info sent successfully. Thank you." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:603 msgid "Sending system info failed! Status: %1%" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:609 msgid "Sending system info was cancelled." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:616 msgid "Sending system info..." msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:84 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:150 msgid "Blacklisted libraries loaded into PrusaSlicer process:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:162 msgid "Eigen vectorization supported:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:169 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:114 src/libslic3r/PrintConfig.cpp:531 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:115 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:120 src/libslic3r/PrintConfig.cpp:546 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:121 msgid "Select the print profiles this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:216 msgid "Compare this preset with some another" msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:218 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:219 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:223 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:227 msgid "Search in settings [%1%]" msgstr "" #: src/slic3r/GUI/Tab.cpp:1285 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1298 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1299 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1302 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1308 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1334 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1336 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1338 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1342 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1346 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1347 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1348 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1352 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1358 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1366 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1369 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1383 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1387 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1395 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1396 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1434 src/slic3r/GUI/Tab.cpp:4262 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1440 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1452 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1453 src/libslic3r/PrintConfig.cpp:2318 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1458 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1469 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1483 msgid "Fuzzy skin (experimental)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1506 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1520 src/libslic3r/ExtrusionEntity.cpp:352 msgid "Skirt" msgstr "" #: src/slic3r/GUI/Tab.cpp:1542 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1547 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1567 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1580 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1584 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1588 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1596 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1604 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1612 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1632 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1642 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1645 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1655 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1658 src/slic3r/GUI/Tab.cpp:4339 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1659 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1661 msgid "Extruder clearance" msgstr "" #: src/slic3r/GUI/Tab.cpp:1666 src/slic3r/GUI/Tab.cpp:4340 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1673 src/libslic3r/PrintConfig.cpp:1956 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1679 src/slic3r/GUI/Tab.cpp:1680 #: src/slic3r/GUI/Tab.cpp:2034 src/slic3r/GUI/Tab.cpp:2035 #: src/slic3r/GUI/Tab.cpp:2418 src/slic3r/GUI/Tab.cpp:2419 #: src/slic3r/GUI/Tab.cpp:2494 src/slic3r/GUI/Tab.cpp:2495 #: src/slic3r/GUI/Tab.cpp:4202 src/slic3r/GUI/Tab.cpp:4203 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1686 src/slic3r/GUI/Tab.cpp:2042 #: src/slic3r/GUI/Tab.cpp:2425 src/slic3r/GUI/Tab.cpp:2501 #: src/slic3r/GUI/Tab.cpp:4210 src/slic3r/GUI/Tab.cpp:4345 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1687 src/slic3r/GUI/Tab.cpp:2043 #: src/slic3r/GUI/Tab.cpp:2426 src/slic3r/GUI/Tab.cpp:2502 #: src/slic3r/GUI/Tab.cpp:4211 src/slic3r/GUI/Tab.cpp:4346 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1774 #, possible-c-format msgid "" "The following line %s contains reserved keywords.\n" "Please remove it, as it may cause problems in G-code visualization and " "printing time estimation." msgid_plural "" "The following lines %s contain reserved keywords.\n" "Please remove them, as they may cause problems in G-code visualization and " "printing time estimation." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:1779 msgid "Found reserved keywords in" msgstr "" #: src/slic3r/GUI/Tab.cpp:1793 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1916 msgid "Nozzle" msgstr "" #: src/slic3r/GUI/Tab.cpp:1921 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1926 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1928 src/libslic3r/PrintConfig.cpp:1859 #: src/libslic3r/PrintConfig.cpp:2889 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1939 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1950 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1956 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1963 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1973 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1976 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1989 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:2013 src/slic3r/GUI/Tab.cpp:2330 #: src/slic3r/GUI/Tab.cpp:3884 src/libslic3r/GCode.cpp:704 #: src/libslic3r/PrintConfig.cpp:2401 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2014 src/slic3r/GUI/Tab.cpp:2331 #: src/libslic3r/GCode.cpp:678 src/libslic3r/PrintConfig.cpp:2351 #: src/libslic3r/PrintConfig.cpp:2366 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2024 src/slic3r/GUI/Tab.cpp:2341 #: src/libslic3r/GCode.cpp:679 src/libslic3r/PrintConfig.cpp:651 #: src/libslic3r/PrintConfig.cpp:661 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2077 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2181 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"Add physical " "printer\" item in the Printer combo box. The Physical Printer profile editor " "opens also when clicking on the \"cog\" icon in the Printer settings tab. " "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2215 src/slic3r/GUI/Tab.cpp:2438 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2224 src/slic3r/GUI/UnsavedChangesDialog.cpp:1279 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2229 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2258 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2262 src/slic3r/GUI/Tab.cpp:2703 #: src/libslic3r/PrintConfig.cpp:1825 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2351 src/libslic3r/GCode.cpp:680 #: src/libslic3r/PrintConfig.cpp:391 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2361 src/libslic3r/GCode.cpp:681 #: src/libslic3r/PrintConfig.cpp:1551 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2371 src/libslic3r/GCode.cpp:682 #: src/libslic3r/PrintConfig.cpp:2773 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2381 src/libslic3r/GCode.cpp:683 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2391 src/libslic3r/GCode.cpp:684 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2400 src/libslic3r/GCode.cpp:685 #: src/libslic3r/PrintConfig.cpp:2392 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2409 src/libslic3r/GCode.cpp:686 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2445 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2460 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2461 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2467 src/slic3r/GUI/Tab.cpp:4186 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2484 src/slic3r/GUI/Tab.cpp:4182 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2545 src/slic3r/GUI/Tab.cpp:2630 #: src/libslic3r/PrintConfig.cpp:1580 src/libslic3r/PrintConfig.cpp:1615 #: src/libslic3r/PrintConfig.cpp:1632 src/libslic3r/PrintConfig.cpp:1649 #: src/libslic3r/PrintConfig.cpp:1665 src/libslic3r/PrintConfig.cpp:1675 #: src/libslic3r/PrintConfig.cpp:1685 src/libslic3r/PrintConfig.cpp:1698 #: src/libslic3r/PrintConfig.cpp:1708 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2568 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2574 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2583 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2588 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2597 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2602 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2655 src/slic3r/GUI/Tab.cpp:2664 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2665 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2700 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2725 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2730 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2736 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2749 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2756 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2936 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2938 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3239 msgid "New printer preset is selecting" msgstr "" #: src/slic3r/GUI/Tab.cpp:3545 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3611 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3611 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3620 msgid "It's a last preset for this physical printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:3625 msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3637 msgid "" "The physical printer below is based on the preset, you are going to delete." msgid_plural "" "The physical printers below are based on the preset, you are going to delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3642 msgid "Note, that selected preset will be deleted from this printer too." msgid_plural "" "Note, that selected preset will be deleted from these printers too." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3647 msgid "" "The physical printer below is based only on the preset, you are going to " "delete." msgid_plural "" "The physical printers below are based only on the preset, you are going to " "delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3652 msgid "" "Note, that this printer will be deleted after deleting of the selected " "preset." msgid_plural "" "Note, that these printers will be deleted after deleting of the selected " "preset." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3657 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3662 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3745 src/slic3r/GUI/Tab.cpp:3818 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3910 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:3913 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:3917 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:3939 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3941 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3943 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3945 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3950 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3952 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3955 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3957 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3967 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3969 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3972 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3975 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3977 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3983 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3984 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3990 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3991 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4145 src/slic3r/GUI/Tab.cpp:4147 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4272 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4277 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4300 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4305 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4380 msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:4382 src/libslic3r/PrintConfig.cpp:3471 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4382 src/libslic3r/PrintConfig.cpp:3573 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1050 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1103 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1118 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1133 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1148 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:771 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:789 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:831 msgid "Old Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:832 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:863 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:866 msgid "Keep" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:863 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:870 msgid "Don't save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:870 msgid "Discard" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:876 msgid "Save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:896 msgid "Ask for unsaved changes when ??closing application??" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:897 msgid "" "You will not be asked about the unsaved changes the next time you create new " "project" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:898 msgid "" "You will not be asked about the unsaved changes the next time you switch a " "preset" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:899 msgid "" "You will not be asked about the unsaved changes the next time you: \n" "- close the application,\n" "- load project,\n" "- process Undo / Redo with change of print technologie,\n" "- take/load snapshot,\n" "- load config file/bundle,\n" "- export config_bundle" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:906 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:907 msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:909 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:939 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:941 msgid "All settings changes will not be saved" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:941 msgid "All settings changes will be discarded." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:944 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:945 msgid "Keep the selected settings." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:946 msgid "Transfer the selected settings to the newly selected preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:950 msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:951 msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1218 msgid "The following preset was modified" msgid_plural "The following presets were modified" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224 msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228 msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1229 msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1275 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1663 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1497 msgid "Show all preset (including incompatible)" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1512 msgid "Left Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1513 msgid "Right Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1558 msgid "Compare Presets" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1558 msgid "Compare %1% Presets" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1620 msgid "One of the presets doesn't found" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1631 msgid "Comparable printer presets has different printer technology" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1645 msgid "Presets are the same" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1653 msgid "" "Presets are different.\n" "Click this button to select the same as left preset for the right preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1677 msgid "Undef category" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1677 msgid "Undef group" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:128 #: src/slic3r/GUI/UpdateDialogs.cpp:194 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Opening Configuration Wizard" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:277 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:90 msgid "" "PrusaSlicer is not using the newest configuration available.\n" "Configuration Wizard may not offer the latest printers, filaments and SLA " "materials to be installed. " msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:95 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:116 src/slic3r/GUI/UpdateDialogs.cpp:184 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:136 msgid "Install" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:159 src/slic3r/GUI/UpdateDialogs.cpp:221 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:159 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:162 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:202 src/slic3r/GUI/UpdateDialogs.cpp:257 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:222 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:227 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:236 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:241 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:260 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:281 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:298 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:317 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:317 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:322 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:21 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:54 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:114 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:116 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:120 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:122 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:173 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:299 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:308 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:309 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:352 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:361 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:362 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:376 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:442 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:454 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:454 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:642 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:643 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:69 #: src/slic3r/Utils/Repetier.cpp:69 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:145 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:148 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:221 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:237 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:244 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:250 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:253 #: src/slic3r/Utils/FixModelByWin10.cpp:386 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:265 #: src/slic3r/Utils/FixModelByWin10.cpp:272 #: src/slic3r/Utils/FixModelByWin10.cpp:304 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:376 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:392 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:394 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:396 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:398 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:410 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:416 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:87 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:93 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:95 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:192 msgid "Connection to Prusa SL1 / SL1S works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:198 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:236 msgid "Connection to PrusaLink works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:242 msgid "Could not connect to PrusaLink" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:65 msgid "Copying of file %1% to %2% failed: %3%" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:593 #: src/slic3r/Utils/PresetUpdater.cpp:610 msgid "Continue and install configuration updates?" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:725 msgid "" "Configuration Updates causes a lost of preset modification.\n" "So, check unsaved changes and save them if necessary." msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:727 msgid "Updater is processing" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:756 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:760 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:763 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:157 msgid "Open G-code file:" msgstr "" #: src/slic3r/Utils/Repetier.cpp:84 msgid "Connection to Repetier works correctly." msgstr "" #: src/slic3r/Utils/Repetier.cpp:90 msgid "Could not connect to Repetier" msgstr "" #: src/slic3r/Utils/Repetier.cpp:92 msgid "Note: Repetier version at least 0.90.0 is required." msgstr "" #: src/slic3r/Utils/Repetier.cpp:240 msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:247 msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:260 msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/libslic3r/GCode.cpp:521 msgid "There is an object with no extrusions in the first layer." msgstr "" #: src/libslic3r/GCode.cpp:540 msgid "" "Empty layer detected between heights %1% and %2%. Make sure the object is " "printable." msgstr "" #: src/libslic3r/GCode.cpp:543 msgid "Object name: %1%" msgstr "" #: src/libslic3r/GCode.cpp:544 msgid "" "This is usually caused by negligibly small extrusions or by a faulty model. " "Try to repair the model or change its orientation on the bed." msgstr "" #: src/libslic3r/GCode.cpp:689 msgid "Filament Start G-code" msgstr "" #: src/libslic3r/GCode.cpp:696 msgid "Filament End G-code" msgstr "" #: src/libslic3r/GCode.cpp:735 msgid "Found reserved keyword(s) into custom g-code:" msgstr "" #: src/libslic3r/GCode.cpp:737 msgid "" "This may cause problems in g-code visualization and printing time estimation." msgstr "" #: src/libslic3r/GCode.cpp:1391 msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:326 src/libslic3r/ExtrusionEntity.cpp:362 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1715 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1726 msgid "" "The selected 3MF contains FDM supports painted object using a newer version " "of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1730 msgid "" "The selected 3MF contains seam painted object using a newer version of " "PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1734 msgid "" "The selected 3MF contains multi-material painted object using a newer " "version of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:988 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Print.cpp:445 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:448 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:452 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:454 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:463 msgid "" "Only a single object may be printed at a time in Spiral Vase mode. Either " "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" #: src/libslic3r/Print.cpp:467 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:480 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:486 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:488 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:490 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:492 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:494 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:515 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:517 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:520 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:522 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:535 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:557 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:570 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:573 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:584 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:592 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:596 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:632 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:637 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:791 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:813 msgid "Generating skirt and brim" msgstr "" #: src/libslic3r/Print.cpp:861 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:865 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLA/Pad.cpp:533 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:628 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:640 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:646 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:661 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:668 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:784 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 src/libslic3r/SLAPrintSteps.cpp:632 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:51 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:67 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:426 msgid "Too many overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:433 msgid "" "Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:441 msgid "Unable to drill the current configuration of holes into the model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:461 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:467 msgid "Failed to drill some holes into the model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:511 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:684 src/libslic3r/SLAPrintSteps.cpp:693 #: src/libslic3r/SLAPrintSteps.cpp:731 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:723 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:847 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:78 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:213 src/libslic3r/PrintConfig.cpp:214 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:221 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:226 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:231 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:236 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:238 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:246 msgid "G-code thumbnails" msgstr "" #: src/libslic3r/PrintConfig.cpp:247 msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" #: src/libslic3r/PrintConfig.cpp:255 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:262 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:263 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:271 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:272 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" #: src/libslic3r/PrintConfig.cpp:281 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:282 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:290 msgid "Name of the printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:298 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:314 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:322 msgid "Ignore HTTPS certificate revocation checks" msgstr "" #: src/libslic3r/PrintConfig.cpp:323 msgid "" "Ignore HTTPS certificate revocation checks in case of missing or offline " "distribution points. One may want to enable this option for self signed " "certificates if connection fails." msgstr "" #: src/libslic3r/PrintConfig.cpp:330 msgid "Printer preset names" msgstr "" #: src/libslic3r/PrintConfig.cpp:331 msgid "Names of presets related to the physical printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:336 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:341 msgid "API key" msgstr "" #: src/libslic3r/PrintConfig.cpp:342 msgid "HTTP digest" msgstr "" #: src/libslic3r/PrintConfig.cpp:362 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:363 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:370 msgid "Avoid crossing perimeters - Max detour length" msgstr "" #: src/libslic3r/PrintConfig.cpp:372 msgid "" "The maximum detour length for avoid crossing perimeters. If the detour is " "longer than this value, avoid crossing perimeters is not applied for this " "travel path. Detour length could be specified either as an absolute value or " "as percentage (for example 50%) of a direct travel path." msgstr "" #: src/libslic3r/PrintConfig.cpp:375 msgid "mm or % (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:381 src/libslic3r/PrintConfig.cpp:2736 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:382 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:385 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:392 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:402 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:403 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:414 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:415 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:423 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:425 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:431 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:432 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:434 src/libslic3r/PrintConfig.cpp:605 #: src/libslic3r/PrintConfig.cpp:1150 src/libslic3r/PrintConfig.cpp:1159 #: src/libslic3r/PrintConfig.cpp:1348 src/libslic3r/PrintConfig.cpp:1638 #: src/libslic3r/PrintConfig.cpp:1689 src/libslic3r/PrintConfig.cpp:1700 #: src/libslic3r/PrintConfig.cpp:1710 src/libslic3r/PrintConfig.cpp:1906 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:440 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:442 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:1062 #: src/libslic3r/PrintConfig.cpp:2184 src/libslic3r/PrintConfig.cpp:2194 #: src/libslic3r/PrintConfig.cpp:2483 src/libslic3r/PrintConfig.cpp:2721 #: src/libslic3r/PrintConfig.cpp:2936 src/libslic3r/PrintConfig.cpp:3445 #: src/libslic3r/PrintConfig.cpp:3566 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:451 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:452 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:453 src/libslic3r/PrintConfig.cpp:1074 #: src/libslic3r/PrintConfig.cpp:1526 src/libslic3r/PrintConfig.cpp:1718 #: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:2029 #: src/libslic3r/PrintConfig.cpp:2076 src/libslic3r/PrintConfig.cpp:3122 #: src/libslic3r/PrintConfig.cpp:3359 src/libslic3r/PrintConfig.cpp:3485 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:460 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:462 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:472 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:474 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:475 src/libslic3r/PrintConfig.cpp:881 #: src/libslic3r/PrintConfig.cpp:889 src/libslic3r/PrintConfig.cpp:898 #: src/libslic3r/PrintConfig.cpp:906 src/libslic3r/PrintConfig.cpp:933 #: src/libslic3r/PrintConfig.cpp:952 src/libslic3r/PrintConfig.cpp:1282 #: src/libslic3r/PrintConfig.cpp:1463 src/libslic3r/PrintConfig.cpp:1545 #: src/libslic3r/PrintConfig.cpp:1621 src/libslic3r/PrintConfig.cpp:1655 #: src/libslic3r/PrintConfig.cpp:1667 src/libslic3r/PrintConfig.cpp:1677 #: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:1799 #: src/libslic3r/PrintConfig.cpp:1936 src/libslic3r/PrintConfig.cpp:2151 #: src/libslic3r/PrintConfig.cpp:2160 src/libslic3r/PrintConfig.cpp:2686 #: src/libslic3r/PrintConfig.cpp:2834 src/libslic3r/PrintConfig.cpp:2844 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:482 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:484 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer.When raft is used, no brim is generated (use " "raft_first_layer_expansion)." msgstr "" #: src/libslic3r/PrintConfig.cpp:493 msgid "Brim type" msgstr "" #: src/libslic3r/PrintConfig.cpp:495 msgid "" "The places where the brim will be printed around each object on the first " "layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:501 msgid "No brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:502 msgid "Outer brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:503 msgid "Inner brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:504 msgid "Outer and inner brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:509 msgid "Brim separation gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:511 msgid "" "Offset of brim from the printed object. The offset is applied after the " "elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:518 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:519 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:526 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:527 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:537 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:538 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:552 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:553 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:570 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:571 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:579 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:580 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:585 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:586 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:593 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:594 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:602 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:611 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:612 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:618 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:619 src/libslic3r/PrintConfig.cpp:3289 #: src/libslic3r/PrintConfig.cpp:3300 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:625 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:626 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:635 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:637 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:643 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:644 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:652 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:662 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:673 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:675 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:681 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:683 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:693 src/libslic3r/PrintConfig.cpp:1128 #: src/libslic3r/PrintConfig.cpp:2651 src/libslic3r/PrintConfig.cpp:2668 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:694 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:695 src/libslic3r/PrintConfig.cpp:1129 msgid "Aligned Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:696 src/libslic3r/PrintConfig.cpp:1135 #: src/libslic3r/PrintConfig.cpp:2669 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:697 src/libslic3r/PrintConfig.cpp:1139 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:698 src/libslic3r/PrintConfig.cpp:1140 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:699 src/libslic3r/PrintConfig.cpp:1141 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:705 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:707 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:716 src/libslic3r/PrintConfig.cpp:727 #: src/libslic3r/PrintConfig.cpp:1247 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:718 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:721 src/libslic3r/PrintConfig.cpp:831 #: src/libslic3r/PrintConfig.cpp:1181 src/libslic3r/PrintConfig.cpp:1373 #: src/libslic3r/PrintConfig.cpp:1428 src/libslic3r/PrintConfig.cpp:1454 #: src/libslic3r/PrintConfig.cpp:1926 src/libslic3r/PrintConfig.cpp:2299 #: src/libslic3r/PrintConfig.cpp:2472 src/libslic3r/PrintConfig.cpp:2559 #: src/libslic3r/PrintConfig.cpp:2791 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:729 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:1201 #: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:2258 #: src/libslic3r/PrintConfig.cpp:2310 src/libslic3r/PrintConfig.cpp:2637 #: src/libslic3r/PrintConfig.cpp:2804 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:739 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:741 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:747 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:749 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:759 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:771 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:782 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:792 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:793 src/libslic3r/PrintConfig.cpp:855 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:799 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:800 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:809 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:810 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:815 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:816 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:825 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:827 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:838 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:839 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:844 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:845 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:847 src/libslic3r/PrintConfig.cpp:2246 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:854 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:860 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:861 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:869 src/libslic3r/PrintConfig.cpp:1746 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:870 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:879 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:880 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:887 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:888 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:895 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:896 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:904 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:905 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:912 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:913 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:922 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:923 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:931 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:932 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:939 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:940 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:944 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:950 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:951 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:958 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:959 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:966 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:967 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:973 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:974 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:982 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:3200 #: src/libslic3r/PrintConfig.cpp:3201 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:990 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:993 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:998 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:999 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:1026 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1027 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:1033 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:1034 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:1039 msgid "Spool weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:1040 msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " "filament spool before printing and one may compare the measured weight with " "the calculated weight of the filament with the spool to find out whether the " "amount of filament on the spool is sufficient to finish the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1044 msgid "g" msgstr "" #: src/libslic3r/PrintConfig.cpp:1053 src/libslic3r/PrintConfig.cpp:3284 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1057 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1059 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:1071 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:1073 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:1108 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:1110 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:2700 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1132 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:1133 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1134 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:1136 src/libslic3r/PrintConfig.cpp:2653 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1137 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1138 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1142 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1143 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1148 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1156 msgid "First object layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1157 msgid "" "This is the acceleration your printer will use for first layer of object " "above raft interface. Set zero to disable acceleration control for first " "layer of object above raft interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:1166 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1167 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:1177 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1190 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates." msgstr "" #: src/libslic3r/PrintConfig.cpp:1197 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1198 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1207 msgid "Speed of object first layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1208 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first object layer above raft interface, regardless " "of their type. If expressed as a percentage (for example: 40%) it will scale " "the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1218 msgid "First layer nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1219 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:1227 msgid "Full fan speed at layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:1228 msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " "\"full_fan_speed_layer\" will be ignored if lower than " "\"disable_fan_first_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"disable_fan_first_layers\" + 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1240 msgid "Fuzzy skin type." msgstr "" #: src/libslic3r/PrintConfig.cpp:1248 msgid "All perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1253 msgid "Fuzzy skin thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:1262 msgid "Fuzzy skin point distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1271 msgid "Fill gaps" msgstr "" #: src/libslic3r/PrintConfig.cpp:1273 msgid "" "Enables filling of gaps between perimeters and between the inner most " "perimeters and infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1280 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:1288 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1289 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:1296 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1297 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1324 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1329 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1330 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1337 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1338 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1346 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1354 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1356 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1359 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1365 msgid "Length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1367 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " "anchor_length_max. Set this parameter to zero to disable anchoring " "perimeters connected to a single infill line." msgstr "" #: src/libslic3r/PrintConfig.cpp:1382 msgid "0 (no open anchors)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1387 src/libslic3r/PrintConfig.cpp:1409 msgid "1000 (unlimited)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1392 msgid "Maximum length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1394 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " "parameter. Set this parameter to zero to disable anchoring." msgstr "" #: src/libslic3r/PrintConfig.cpp:1404 msgid "0 (not anchored)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1414 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1416 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1424 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1434 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1435 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1440 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1442 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1449 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1451 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1462 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1470 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1471 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1484 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1485 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1493 msgid "Maximum width of a segmented region" msgstr "" #: src/libslic3r/PrintConfig.cpp:1494 msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" #: src/libslic3r/PrintConfig.cpp:1495 src/libslic3r/PrintConfig.cpp:2091 #: src/libslic3r/PrintConfig.cpp:2100 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1502 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1503 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1509 src/libslic3r/PrintConfig.cpp:1511 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1516 msgid "All top surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1517 msgid "Topmost surface only" msgstr "" #: src/libslic3r/PrintConfig.cpp:1518 msgid "All solid surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1523 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1525 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1533 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1535 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1552 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1563 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1564 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1572 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1573 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1578 msgid "How to apply limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1579 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1581 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1586 msgid "Emit to G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1587 msgid "Use for time estimate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1588 msgid "Ignore" msgstr "" #: src/libslic3r/PrintConfig.cpp:1611 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1612 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1613 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1614 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1617 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1618 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1619 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1620 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1628 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1629 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1634 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1635 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1636 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1637 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1645 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1646 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1647 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1648 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1652 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1653 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1654 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1664 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1666 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1674 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1676 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1684 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1686 msgid "" "Maximum acceleration when extruding (M204 P)\n" "\n" "Marlin (legacy) firmware flavor will use this also as travel acceleration " "(M204 T)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1699 msgid "Maximum acceleration when retracting (M204 R)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1707 msgid "Maximum acceleration for travel moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:1709 msgid "Maximum acceleration for travel moves (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1725 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1717 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1726 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1736 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1737 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1747 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1756 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1768 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1772 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1767 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1779 src/libslic3r/PrintConfig.cpp:1788 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1780 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1789 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1797 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1798 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1805 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1806 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1815 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1816 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1826 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1831 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1832 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1852 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1853 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1860 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1867 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1868 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1877 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1879 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1885 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1886 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1894 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1895 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:1920 #: src/libslic3r/PrintConfig.cpp:1933 src/libslic3r/PrintConfig.cpp:1943 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1904 msgid "" "This is the acceleration your printer will use for perimeters. Set zero to " "disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1911 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1913 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1922 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1935 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1945 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1949 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1957 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1969 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1970 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1975 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1976 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1984 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1985 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1990 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1991 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:2008 msgid "Raft contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2010 msgid "" "The vertical distance between object and raft. Ignored for soluble interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2017 msgid "Raft expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2019 msgid "Expansion of the raft in XY plane for better stability." msgstr "" #: src/libslic3r/PrintConfig.cpp:2026 msgid "First layer density" msgstr "" #: src/libslic3r/PrintConfig.cpp:2028 msgid "Density of the first raft or support layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2036 msgid "First layer expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2038 msgid "" "Expansion of the first raft or support layer to improve adhesion to print " "bed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2045 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2047 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:2055 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:2056 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:2066 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2067 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:2073 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:2074 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:2081 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2082 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:2087 src/libslic3r/PrintConfig.cpp:2095 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2088 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2089 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2096 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2097 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2105 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2106 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:2113 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2114 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:2115 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2122 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2123 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2124 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2132 src/libslic3r/PrintConfig.cpp:2140 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:2133 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2141 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:2148 src/libslic3r/PrintConfig.cpp:2149 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2150 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2156 src/libslic3r/PrintConfig.cpp:2157 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2158 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:2165 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:2167 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:2173 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:2174 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:2175 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:2183 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2185 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:2186 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2193 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2195 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2196 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2203 msgid "Distance from brim/object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2204 msgid "" "Distance between skirt and brim (when draft shield is not used) or objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:2210 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2211 msgid "Height of skirt expressed in layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2217 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:2218 msgid "" "With draft shield active, the skirt will be printed skirt_distance from the " "object, possibly intersecting brim.\n" "Enabled = skirt is as tall as the highest printed object.\n" "Limited = skirt is as tall as specified by skirt_height.\n" "This is useful to protect an ABS or ASA print from warping and detaching " "from print bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:2226 msgid "Disabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2227 msgid "Limited" msgstr "" #: src/libslic3r/PrintConfig.cpp:2228 msgid "Enabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2233 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2234 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2235 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:2243 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2244 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:2253 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:2255 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2265 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:2267 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2268 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:2274 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2276 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:2282 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:2284 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2296 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2307 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2319 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2325 src/libslic3r/PrintConfig.cpp:2326 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:2332 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:2333 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" #: src/libslic3r/PrintConfig.cpp:2341 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2342 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:2352 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:2367 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:2383 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2384 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2393 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:2402 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2410 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2411 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:2416 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:2417 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2422 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2423 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2430 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2432 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:2440 msgid "Slicing Mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2442 msgid "" "Use \"Even / Odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" #: src/libslic3r/PrintConfig.cpp:2447 msgid "Regular" msgstr "" #: src/libslic3r/PrintConfig.cpp:2448 msgid "Even / Odd" msgstr "" #: src/libslic3r/PrintConfig.cpp:2449 msgid "Close holes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2454 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2456 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2460 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2462 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2468 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2470 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2480 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2482 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2492 src/libslic3r/PrintConfig.cpp:3394 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2498 msgid "Top contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2500 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2508 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2509 msgid "0.1 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2510 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2516 msgid "Bottom contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2518 msgid "" "The vertical distance between the object top surface and the support " "material interface. If set to zero, support_material_contact_distance will " "be used for both top and bottom contact Z distances." msgstr "" #: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2608 msgid "same as top" msgstr "" #: src/libslic3r/PrintConfig.cpp:2526 msgid "0.1" msgstr "" #: src/libslic3r/PrintConfig.cpp:2527 msgid "0.2" msgstr "" #: src/libslic3r/PrintConfig.cpp:2532 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2534 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2539 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2545 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2547 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2556 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2565 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2567 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2572 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2574 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2582 msgid "Top interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2584 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2591 msgid "0 (off)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2592 msgid "1 (light)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2593 msgid "2 (default)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2594 msgid "3 (heavy)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2600 msgid "Bottom interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2602 msgid "" "Number of interface layers to insert between the object(s) and support " "material. Set to -1 to use support_material_interface_layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2614 msgid "Closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2616 msgid "" "For snug supports, the support regions will be merged using morphological " "closing operation. Gaps smaller than the closing radius will be filled in." msgstr "" #: src/libslic3r/PrintConfig.cpp:2624 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2626 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2635 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2644 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2646 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2652 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2658 msgid "Interface pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2660 msgid "" "Pattern used to generate support material interface. Default pattern for non-" "soluble support interface is Rectilinear, while default pattern for soluble " "support interface is Concentric." msgstr "" #: src/libslic3r/PrintConfig.cpp:2674 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2676 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2685 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2692 msgid "Style" msgstr "" #: src/libslic3r/PrintConfig.cpp:2694 msgid "" "Style and shape of the support towers. Projecting the supports into a " "regular grid will create more stable supports, while snug support towers " "will save material and reduce object scarring." msgstr "" #: src/libslic3r/PrintConfig.cpp:2701 msgid "Snug" msgstr "" #: src/libslic3r/PrintConfig.cpp:2706 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2708 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2714 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2716 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2728 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2730 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2737 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2740 msgid "Nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2746 msgid "Thick bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:2748 msgid "Print bridges with round extrusions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2753 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2755 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2761 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2762 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2774 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} " "and {next_extruder} can be used. When a tool-changing command which changes " "to the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2787 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2799 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2814 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2815 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2823 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2826 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2833 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2841 msgid "Z travel" msgstr "" #: src/libslic3r/PrintConfig.cpp:2842 msgid "" "Speed for movements along the Z axis.\n" "When set to zero, the value is ignored and regular travel speed is used " "instead." msgstr "" #: src/libslic3r/PrintConfig.cpp:2850 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2851 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2857 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2858 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2864 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2865 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2875 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2876 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2882 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2883 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2890 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2896 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2897 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2903 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2904 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2913 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2914 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2920 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2921 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2928 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2934 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2935 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2941 src/libslic3r/PrintConfig.cpp:2942 msgid "Wipe tower brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2950 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2951 msgid "" "Purging after toolchange will be done inside this object's infills. This " "lowers the amount of waste but may result in longer print time due to " "additional travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2958 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2959 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2965 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2966 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2972 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2974 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2982 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2983 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3050 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3051 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3056 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3057 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3062 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:3064 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3070 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3075 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3076 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:3077 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3082 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3083 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:3084 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3089 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3090 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3096 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:3097 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:3102 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:3103 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3104 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3111 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:3112 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3113 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3120 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:3121 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3128 src/libslic3r/PrintConfig.cpp:3129 #: src/libslic3r/PrintConfig.cpp:3130 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3136 src/libslic3r/PrintConfig.cpp:3137 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3138 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:3144 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3146 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:3153 src/libslic3r/PrintConfig.cpp:3154 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3155 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:3167 src/libslic3r/PrintConfig.cpp:3168 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:3179 src/libslic3r/PrintConfig.cpp:3180 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3186 src/libslic3r/PrintConfig.cpp:3187 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:3188 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3193 src/libslic3r/PrintConfig.cpp:3194 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:3195 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:3202 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3209 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3214 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:3215 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3222 src/libslic3r/PrintConfig.cpp:3223 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3230 src/libslic3r/PrintConfig.cpp:3231 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3238 src/libslic3r/PrintConfig.cpp:3239 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3245 src/libslic3r/PrintConfig.cpp:3246 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3253 src/libslic3r/PrintConfig.cpp:3254 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3261 src/libslic3r/PrintConfig.cpp:3262 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3268 src/libslic3r/PrintConfig.cpp:3269 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:3275 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:3276 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:3288 src/libslic3r/PrintConfig.cpp:3299 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:3310 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:3312 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:3317 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3319 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:3326 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3328 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:3335 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3337 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3345 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3347 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:3355 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:3357 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:3366 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:3368 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:3376 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:3377 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:3385 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:3386 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:3387 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:3399 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:3401 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:3410 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3412 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:3420 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3422 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:3429 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3432 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3442 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3444 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:3452 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:3454 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3461 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3463 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:3473 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:3484 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:3490 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:3492 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:3498 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:3500 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:3505 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3507 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3515 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3516 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:3529 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:3530 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:3540 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3542 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3562 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3564 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3575 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3580 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3582 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3587 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3589 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3598 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3600 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3607 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3609 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3616 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3619 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3626 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:3628 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:3633 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3635 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:3643 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:3645 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:3655 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:4077 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:4078 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:4089 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:4090 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:4095 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4096 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4100 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4101 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4105 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:4106 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:4111 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:4116 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4117 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:4122 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:4123 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:4128 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:4129 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:4134 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4135 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4139 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4140 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4144 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:4145 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:4149 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4150 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:4160 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:4161 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:4166 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:4187 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:4188 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:4192 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:4193 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:4196 msgid "Ensure on bed" msgstr "" #: src/libslic3r/PrintConfig.cpp:4197 msgid "" "Lift the object above the bed when it is partially below. Enabled by " "default, use --no-ensure-on-bed to disable." msgstr "" #: src/libslic3r/PrintConfig.cpp:4201 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:4202 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:4206 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:4207 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:4211 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:4216 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4220 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4224 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:4225 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4229 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:4230 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4235 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4240 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:4243 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:4244 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:4253 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:4254 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:4257 msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4258 msgid "" "This version of PrusaSlicer may not understand configurations produced by " "newest PrusaSlicer versions. For example, newer PrusaSlicer may extend the " "list of supported firmware flavors. One may decide to bail out or to " "substitute an unknown value with a default silently or verbosely." msgstr "" #: src/libslic3r/PrintConfig.cpp:4265 msgid "Bail out on unknown configuration values" msgstr "" #: src/libslic3r/PrintConfig.cpp:4266 msgid "" "Enable reading unknown configuration values by verbosely substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4267 msgid "" "Enable reading unknown configuration values by silently substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4271 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4272 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:4275 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:4276 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4280 msgid "Single instance mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:4281 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:4292 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:4293 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4296 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:4297 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:4303 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4304 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:124 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:227 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:389 msgid "Generating support material" msgstr "" #: resources/data/hints.ini: [hint:Fuzzy skin] msgid "Fuzzy skin\nDid you know that you can create rough fibre-like texture on the sides of your models using theFuzzy skinfeature? You can also use modifiers to apply fuzzy-skin only to a portion of your model." msgstr "" #: resources/data/hints.ini: [hint:Shapes gallery] msgid "Shapes gallery\nDid you know that PrusaSlicer has a Shapes Gallery? You can use the included models as modifiers, negative volumes or as printable objects. Right-click the platter and selectAdd Shape - Gallery." msgstr "" #: resources/data/hints.ini: [hint:Auto-arrange settings] msgid "Auto-arrange settings\nDid you know that you can right-click theauto-arrange iconto adjust the size of the gap between objects and to allow automatic rotations?" msgstr "" #: resources/data/hints.ini: [hint:Negative volume] msgid "Negative volume\nDid you know that you can subtract one mesh from another using the Negative volume modifier? That way you can, for example, create easily resizable holes directly in PrusaSlicer. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Simplify mesh] msgid "Simplify mesh\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Reload from disk] msgid "Reload from disk\nDid you know that if you created a newer version of your model, you can simply reload it in PrusaSlicer? Right-click the model in the 3D view and choose Reload from disk. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Hiding sidebar] msgid "Hiding sidebar\nDid you know that you can hide the right sidebar using the shortcut Shift+Tab? You can also enable the icon for this from thePreferences." msgstr "" #: resources/data/hints.ini: [hint:Perspective camera] msgid "Perspective camera\nDid you know that you can use the K key to quickly switch between an orthographic and perspective camera?" msgstr "" #: resources/data/hints.ini: [hint:Camera Views] msgid "Camera Views\nDid you know that you can use the number keys 0-6 to quickly switch between predefined camera angles?" msgstr "" #: resources/data/hints.ini: [hint:Place on face] msgid "Place on face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select thePlace on facefunction or press the F key." msgstr "" #: resources/data/hints.ini: [hint:Set number of instances] msgid "Set number of instances\nDid you know that you can right-click a model and set an exact number of instances instead of copy-pasting it several times?" msgstr "" #: resources/data/hints.ini: [hint:Combine infill] msgid "Combine infill\nDid you know that you can print the infill with a higher layer height compared to perimeters to save print time using the settingCombine infill every." msgstr "" #: resources/data/hints.ini: [hint:Variable layer height] msgid "Variable layer height\nDid you know that you can print different regions of your model with a different layer height and smooth the transitions between them? Try theVariable layer height tool.(Not available for SLA printers.)" msgstr "" #: resources/data/hints.ini: [hint:Undo/redo history] msgid "Undo/redo history\nDid you know that you can right-click theundo/redo arrowsto see the history of changes and to undo or redo several actions at once?" msgstr "" #: resources/data/hints.ini: [hint:Different layer height for each model] msgid "Different layer height for each model\nDid you know that you can print each model on the plater with a different layer height? Right-click the model in the 3D view, choose Layers and Perimeters and adjust the values in the right panel. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Solid infill threshold area] msgid "Solid infill threshold area\nDid you know that you can make parts of your model with a small cross-section be filled with solid infill automatically? Set theSolid infill threshold area.(Expert mode only.)" msgstr "" #: resources/data/hints.ini: [hint:Search functionality] msgid "Search functionality\nDid you know that you use theSearchtool to quickly find a specific PrusaSlicer setting? Or use the familiar shortcut Ctrl+F." msgstr "" #: resources/data/hints.ini: [hint:Box selection] msgid "Box selection\nDid you know that you can do a box selection with Shift+Mouse drag? You can also box-deselect objects with Alt+Mouse drag." msgstr "" #: resources/data/hints.ini: [hint:Zoom on selected objects or on all objects if none selected] msgid "Zoom on selected objects or on all objects if none selected\nDid you know that you can zoom in on selected objects by pressing the Z key? If none are selected, the camera will zoom on all objects in the scene." msgstr "" #: resources/data/hints.ini: [hint:Printable toggle] msgid "Printable toggle\nDid you know that you can disable the G-code generation for the selected model without having to move or delete it? Toggle the Printable property of a model from the Right-click context menu." msgstr "" #: resources/data/hints.ini: [hint:Mirror] msgid "Mirror\nDid you know that you can mirror the selected model to create a reversed version of it? Right-click the model, select Mirror and pick the mirror axis." msgstr "" #: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45 degrees] msgid "PageUp / PageDown quick rotation by 45 degrees\nDid you know that you can quickly rotate selected models by 45 degrees around the Z-axis clockwise or counter-clockwise by pressing Page Up or Page Down respectively?" msgstr "" #: resources/data/hints.ini: [hint:Load config from G-code] msgid "Load config from G-code\nDid you know that you can use File-Import Config to load print, filament and printer profiles from an existing G-code file? Similarly, you can use File-Import SL1 archive, which also lets you reconstruct 3D models from the voxel data." msgstr "" #: resources/data/hints.ini: [hint:Ironing] msgid "Ironing\nDid you know that you can smooth top surfaces of prints using Ironing? The nozzle will run a special second infill phase at the same layer to fill in holes and flatten any lifted plastic. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on supports] msgid "Paint-on supports\nDid you know that you can paint directly on the object and select areas, where supports should be enforced or blocked? Try thePaint-on supportsfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on seam] msgid "Paint-on seam\nDid you know that you can paint directly on the object and select where to place the start/endpoint of each perimeter loop? Try theSeam paintingfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Insert Pause] msgid "Insert Pause\nDid you know that you can schedule the print to pause at a specific layer? Right-click the layer slider in the Preview and select Add pause print (M601). This can be used to insert magnets, weights or nuts into your prints. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Insert Custom G-code] msgid "Insert Custom G-code\nDid you know that you can insert a custom G-code at a specific layer? Right-click the layer in the Preview and select Add custom G-code. With this function you can, for example, create a temperature tower. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Configuration snapshots] msgid "Configuration snapshots\nDid you know that roll back to a complete backup of all system and user profiles? You can view and move back and forth between snapshots using the Configuration - Configuration snapshots menu." msgstr "" #: resources/data/hints.ini: [hint:Minimum wall thickness] msgid "Minimum wall thickness\nDid you know that instead of the number of top and bottom layers, you can define theMinimum shell thicknessin millimeters? This feature is especially useful when using the variable layer height function." msgstr "" #: resources/data/hints.ini: [hint:Settings in non-modal window] msgid "Settings in non-modal window\nDid you know that you can open the Settings in a new non-modal window? This means you can have settings open on one screen and the G-code Preview on the other. Go to thePreferencesand select Settings in non-modal window." msgstr "" #: resources/data/hints.ini: [hint:Adaptive infills] msgid "Adaptive infills\nDid you know that you can use the Adaptive cubic and Support cubic infills to decrease the print time and lower the filament consumption? Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Fullscreen mode] msgid "Fullscreen mode\nDid you know that you can switch PrusaSlicer to fullscreen mode? Use the F11 hotkey." msgstr ""