#ifndef slic3r_Geometry_hpp_
#define slic3r_Geometry_hpp_

#include "libslic3r.h"
#include "BoundingBox.hpp"
#include "ExPolygon.hpp"
#include "Polygon.hpp"
#include "Polyline.hpp"

// Serialization through the Cereal library
#include <cereal/access.hpp>

#define BOOST_VORONOI_USE_GMP 1
#include "boost/polygon/voronoi.hpp"

namespace ClipperLib {
class PolyNode;
using PolyNodes = std::vector<PolyNode*>;
}

namespace Slic3r { namespace Geometry {

// Generic result of an orientation predicate.
enum Orientation
{
    ORIENTATION_CCW = 1,
    ORIENTATION_CW = -1,
    ORIENTATION_COLINEAR = 0
};

// Return orientation of the three points (clockwise, counter-clockwise, colinear)
// The predicate is exact for the coord_t type, using 64bit signed integers for the temporaries.
// which means, the coord_t types must not have some of the topmost bits utilized.
// As the points are limited to 30 bits + signum,
// the temporaries u, v, w are limited to 61 bits + signum,
// and d is limited to 63 bits + signum and we are good.
static inline Orientation orient(const Point &a, const Point &b, const Point &c)
{
    // BOOST_STATIC_ASSERT(sizeof(coord_t) * 2 == sizeof(int64_t));
    int64_t u = int64_t(b(0)) * int64_t(c(1)) - int64_t(b(1)) * int64_t(c(0));
    int64_t v = int64_t(a(0)) * int64_t(c(1)) - int64_t(a(1)) * int64_t(c(0));
    int64_t w = int64_t(a(0)) * int64_t(b(1)) - int64_t(a(1)) * int64_t(b(0));
    int64_t d = u - v + w;
    return (d > 0) ? ORIENTATION_CCW : ((d == 0) ? ORIENTATION_COLINEAR : ORIENTATION_CW);
}

// Return orientation of the polygon by checking orientation of the left bottom corner of the polygon
// using exact arithmetics. The input polygon must not contain duplicate points
// (or at least the left bottom corner point must not have duplicates).
static inline bool is_ccw(const Polygon &poly)
{
    // The polygon shall be at least a triangle.
    assert(poly.points.size() >= 3);
    if (poly.points.size() < 3)
        return true;

    // 1) Find the lowest lexicographical point.
    unsigned int imin = 0;
    for (unsigned int i = 1; i < poly.points.size(); ++ i) {
        const Point &pmin = poly.points[imin];
        const Point &p    = poly.points[i];
        if (p(0) < pmin(0) || (p(0) == pmin(0) && p(1) < pmin(1)))
            imin = i;
    }

    // 2) Detect the orientation of the corner imin.
    size_t iPrev = ((imin == 0) ? poly.points.size() : imin) - 1;
    size_t iNext = ((imin + 1 == poly.points.size()) ? 0 : imin + 1);
    Orientation o = orient(poly.points[iPrev], poly.points[imin], poly.points[iNext]);
    // The lowest bottom point must not be collinear if the polygon does not contain duplicate points
    // or overlapping segments.
    assert(o != ORIENTATION_COLINEAR);
    return o == ORIENTATION_CCW;
}

inline bool ray_ray_intersection(const Vec2d &p1, const Vec2d &v1, const Vec2d &p2, const Vec2d &v2, Vec2d &res)
{
    double denom = v1(0) * v2(1) - v2(0) * v1(1);
    if (std::abs(denom) < EPSILON)
        return false;
    double t = (v2(0) * (p1(1) - p2(1)) - v2(1) * (p1(0) - p2(0))) / denom;
    res(0) = p1(0) + t * v1(0);
    res(1) = p1(1) + t * v1(1);
    return true;
}

inline bool segment_segment_intersection(const Vec2d &p1, const Vec2d &v1, const Vec2d &p2, const Vec2d &v2, Vec2d &res)
{
    double denom = v1(0) * v2(1) - v2(0) * v1(1);
    if (std::abs(denom) < EPSILON)
        // Lines are collinear.
        return false;
    double s12_x = p1(0) - p2(0);
    double s12_y = p1(1) - p2(1);
    double s_numer = v1(0) * s12_y - v1(1) * s12_x;
    bool   denom_is_positive = false;
    if (denom < 0.) {
        denom_is_positive = true;
        denom   = - denom;
        s_numer = - s_numer;
    }
    if (s_numer < 0.)
        // Intersection outside of the 1st segment.
        return false;
    double t_numer = v2(0) * s12_y - v2(1) * s12_x;
    if (! denom_is_positive)
        t_numer = - t_numer;
    if (t_numer < 0. || s_numer > denom || t_numer > denom)
        // Intersection outside of the 1st or 2nd segment.
        return false;
    // Intersection inside both of the segments.
    double t = t_numer / denom;
    res(0) = p1(0) + t * v1(0);
    res(1) = p1(1) + t * v1(1);
    return true;
}


inline int segments_could_intersect(
	const Slic3r::Point &ip1, const Slic3r::Point &ip2, 
	const Slic3r::Point &jp1, const Slic3r::Point &jp2)
{
	Vec2i64 iv   = (ip2 - ip1).cast<int64_t>();
	Vec2i64 vij1 = (jp1 - ip1).cast<int64_t>();
	Vec2i64 vij2 = (jp2 - ip1).cast<int64_t>();
	int64_t tij1 = cross2(iv, vij1);
	int64_t tij2 = cross2(iv, vij2);
	int     sij1 = (tij1 > 0) ? 1 : ((tij1 < 0) ? -1 : 0); // signum
	int     sij2 = (tij2 > 0) ? 1 : ((tij2 < 0) ? -1 : 0);
	return sij1 * sij2;
}

inline bool segments_intersect(
	const Slic3r::Point &ip1, const Slic3r::Point &ip2, 
	const Slic3r::Point &jp1, const Slic3r::Point &jp2)
{
	return segments_could_intersect(ip1, ip2, jp1, jp2) <= 0 && 
		   segments_could_intersect(jp1, jp2, ip1, ip2) <= 0;
}

// Based on Liang-Barsky function by Daniel White @ http://www.skytopia.com/project/articles/compsci/clipping.html
template<typename T>
bool liang_barsky_line_clipping(
	// Start and end points of the source line, result will be stored there as well.
	Eigen::Matrix<T, 2, 1, Eigen::DontAlign> 						&x0,
	Eigen::Matrix<T, 2, 1, Eigen::DontAlign> 						&x1,
	// Bounding box to clip with.
	const BoundingBoxBase<Eigen::Matrix<T, 2, 1, Eigen::DontAlign>> &bbox)
{
    Eigen::Matrix<T, 2, 1, Eigen::DontAlign> v = x1 - x0;
    double t0 = 0.0;
    double t1 = 1.0;

	// Traverse through left, right, bottom, top edges.
    for (int edge = 0; edge < 4; ++ edge)
    {
		double p, q;
    	switch (edge) {
    	case 0:	 p = - v.x();    q = - bbox.min.x() + x0.x();	break;
        case 1:  p =   v.x();    q =   bbox.max.x() - x0.x();	break;
        case 2:  p = - v.y();    q = - bbox.min.y() + x0.y();	break;
        default: p =   v.y();    q =   bbox.max.y() - x0.y();   break;
    	}
        
		if (p == 0) {
			if (q < 0)
				// Line parallel to the bounding box edge is fully outside of the bounding box.
				return false;
			// else don't clip
		} else {
	        double r = q / p;
			if (p < 0) {
				if (r > t1)
            		// Fully clipped.
            		return false;
				if (r > t0)
            		// Partially clipped.
            		t0 = r;
			} else {
				assert(p > 0);
				if (r < t0)
            		// Fully clipped.
            		return false;
				if (r < t1)
            		// Partially clipped.
            		t1 = r;
			}
        }
    }

    // Clipped successfully.
    x1  = x0 + t1 * v;
    x0 += t0 * v;
    return true;
}

// Based on Liang-Barsky function by Daniel White @ http://www.skytopia.com/project/articles/compsci/clipping.html
template<typename T>
bool liang_barsky_line_clipping(
	// Start and end points of the source line.
	const Eigen::Matrix<T, 2, 1, Eigen::DontAlign> 					&x0src,
	const Eigen::Matrix<T, 2, 1, Eigen::DontAlign> 					&x1src,
	// Bounding box to clip with.
	const BoundingBoxBase<Eigen::Matrix<T, 2, 1, Eigen::DontAlign>> &bbox,
	// Start and end points of the clipped line.
	Eigen::Matrix<T, 2, 1, Eigen::DontAlign> 						&x0clip,
	Eigen::Matrix<T, 2, 1, Eigen::DontAlign> 						&x1clip)
{
	x0clip = x0src;
	x1clip = x1src;
	return liang_barsky_line_clipping(x0clip, x1clip, bbox);
}

Pointf3s convex_hull(Pointf3s points);
Polygon convex_hull(Points points);
Polygon convex_hull(const Polygons &polygons);

bool directions_parallel(double angle1, double angle2, double max_diff = 0);
template<class T> bool contains(const std::vector<T> &vector, const Point &point);
template<typename T> T rad2deg(T angle) { return T(180.0) * angle / T(PI); }
double rad2deg_dir(double angle);
template<typename T> T deg2rad(T angle) { return T(PI) * angle / T(180.0); }
template<typename T> T angle_to_0_2PI(T angle)
{
    static const T TWO_PI = T(2) * T(PI);
    while (angle < T(0))
    {
        angle += TWO_PI;
    }
    while (TWO_PI < angle)
    {
        angle -= TWO_PI;
    }

    return angle;
}

/// Find the center of the circle corresponding to the vector of Points as an arc.
Point circle_taubin_newton(const Points::const_iterator& input_start, const Points::const_iterator& input_end, size_t cycles = 20);
inline Point circle_taubin_newton(const Points& input, size_t cycles = 20) { return circle_taubin_newton(input.cbegin(), input.cend(), cycles); }

/// Find the center of the circle corresponding to the vector of Pointfs as an arc.
Vec2d circle_taubin_newton(const Vec2ds::const_iterator& input_start, const Vec2ds::const_iterator& input_end, size_t cycles = 20);
inline Vec2d circle_taubin_newton(const Vec2ds& input, size_t cycles = 20) { return circle_taubin_newton(input.cbegin(), input.cend(), cycles); }

void simplify_polygons(const Polygons &polygons, double tolerance, Polygons* retval);

double linint(double value, double oldmin, double oldmax, double newmin, double newmax);
bool arrange(
    // input
    size_t num_parts, const Vec2d &part_size, coordf_t gap, const BoundingBoxf* bed_bounding_box, 
    // output
    Pointfs &positions);

class VoronoiDiagram : public boost::polygon::voronoi_diagram<double> {
public:
    typedef double                                          coord_type;
    typedef boost::polygon::point_data<coordinate_type>     point_type;
    typedef boost::polygon::segment_data<coordinate_type>   segment_type;
    typedef boost::polygon::rectangle_data<coordinate_type> rect_type;
};

class MedialAxis {
public:
    Lines lines;
    const ExPolygon* expolygon;
    double max_width;
    double min_width;
    MedialAxis(double _max_width, double _min_width, const ExPolygon* _expolygon = NULL)
        : expolygon(_expolygon), max_width(_max_width), min_width(_min_width) {};
    void build(ThickPolylines* polylines);
    void build(Polylines* polylines);
    
private:
    using VD = VoronoiDiagram;
    VD vd;
    std::set<const VD::edge_type*> edges, valid_edges;
    std::map<const VD::edge_type*, std::pair<coordf_t,coordf_t> > thickness;
    void process_edge_neighbors(const VD::edge_type* edge, ThickPolyline* polyline);
    bool validate_edge(const VD::edge_type* edge);
    const Line& retrieve_segment(const VD::cell_type* cell) const;
    const Point& retrieve_endpoint(const VD::cell_type* cell) const;
};

// Sets the given transform by assembling the given transformations in the following order:
// 1) mirror
// 2) scale
// 3) rotate X
// 4) rotate Y
// 5) rotate Z
// 6) translate
void assemble_transform(Transform3d& transform, const Vec3d& translation = Vec3d::Zero(), const Vec3d& rotation = Vec3d::Zero(), const Vec3d& scale = Vec3d::Ones(), const Vec3d& mirror = Vec3d::Ones());

// Returns the transform obtained by assembling the given transformations in the following order:
// 1) mirror
// 2) scale
// 3) rotate X
// 4) rotate Y
// 5) rotate Z
// 6) translate
Transform3d assemble_transform(const Vec3d& translation = Vec3d::Zero(), const Vec3d& rotation = Vec3d::Zero(), const Vec3d& scale = Vec3d::Ones(), const Vec3d& mirror = Vec3d::Ones());

// Returns the euler angles extracted from the given rotation matrix
// Warning -> The matrix should not contain any scale or shear !!!
Vec3d extract_euler_angles(const Eigen::Matrix<double, 3, 3, Eigen::DontAlign>& rotation_matrix);

// Returns the euler angles extracted from the given affine transform
// Warning -> The transform should not contain any shear !!!
Vec3d extract_euler_angles(const Transform3d& transform);

class Transformation
{
    struct Flags
    {
        bool dont_translate;
        bool dont_rotate;
        bool dont_scale;
        bool dont_mirror;

        Flags();

        bool needs_update(bool dont_translate, bool dont_rotate, bool dont_scale, bool dont_mirror) const;
        void set(bool dont_translate, bool dont_rotate, bool dont_scale, bool dont_mirror);
    };

    Vec3d m_offset;              // In unscaled coordinates
    Vec3d m_rotation;            // Rotation around the three axes, in radians around mesh center point
    Vec3d m_scaling_factor;      // Scaling factors along the three axes
    Vec3d m_mirror;              // Mirroring along the three axes

    mutable Transform3d m_matrix;
    mutable Flags m_flags;
    mutable bool m_dirty;

public:
    Transformation();
    explicit Transformation(const Transform3d& transform);

    const Vec3d& get_offset() const { return m_offset; }
    double get_offset(Axis axis) const { return m_offset(axis); }

    void set_offset(const Vec3d& offset);
    void set_offset(Axis axis, double offset);

    const Vec3d& get_rotation() const { return m_rotation; }
    double get_rotation(Axis axis) const { return m_rotation(axis); }

    void set_rotation(const Vec3d& rotation);
    void set_rotation(Axis axis, double rotation);

    const Vec3d& get_scaling_factor() const { return m_scaling_factor; }
    double get_scaling_factor(Axis axis) const { return m_scaling_factor(axis); }

    void set_scaling_factor(const Vec3d& scaling_factor);
    void set_scaling_factor(Axis axis, double scaling_factor);
    bool is_scaling_uniform() const { return std::abs(m_scaling_factor.x() - m_scaling_factor.y()) < 1e-8 && std::abs(m_scaling_factor.x() - m_scaling_factor.z()) < 1e-8; }

    const Vec3d& get_mirror() const { return m_mirror; }
    double get_mirror(Axis axis) const { return m_mirror(axis); }
    bool is_left_handed() const { return m_mirror.x() * m_mirror.y() * m_mirror.z() < 0.; }

    void set_mirror(const Vec3d& mirror);
    void set_mirror(Axis axis, double mirror);

    void set_from_transform(const Transform3d& transform);

    void reset();

    const Transform3d& get_matrix(bool dont_translate = false, bool dont_rotate = false, bool dont_scale = false, bool dont_mirror = false) const;

    Transformation operator * (const Transformation& other) const;

    // Find volume transformation, so that the chained (instance_trafo * volume_trafo) will be as close to identity
    // as possible in least squares norm in regard to the 8 corners of bbox.
    // Bounding box is expected to be centered around zero in all axes.
    static Transformation volume_to_bed_transformation(const Transformation& instance_transformation, const BoundingBoxf3& bbox);

private:
	friend class cereal::access;
	template<class Archive> void serialize(Archive & ar) { ar(m_offset, m_rotation, m_scaling_factor, m_mirror); }
	explicit Transformation(int) : m_dirty(true) {}
	template <class Archive> static void load_and_construct(Archive &ar, cereal::construct<Transformation> &construct)
	{
		// Calling a private constructor with special "int" parameter to indicate that no construction is necessary.
		construct(1);
		ar(construct.ptr()->m_offset, construct.ptr()->m_rotation, construct.ptr()->m_scaling_factor, construct.ptr()->m_mirror);
	}
};

// For parsing a transformation matrix from 3MF / AMF.
extern Transform3d transform3d_from_string(const std::string& transform_str);

// Rotation when going from the first coordinate system with rotation rot_xyz_from applied
// to a coordinate system with rot_xyz_to applied.
extern Eigen::Quaterniond rotation_xyz_diff(const Vec3d &rot_xyz_from, const Vec3d &rot_xyz_to);
// Rotation by Z to align rot_xyz_from to rot_xyz_to.
// This should only be called if it is known, that the two rotations only differ in rotation around the Z axis.
extern double rotation_diff_z(const Vec3d &rot_xyz_from, const Vec3d &rot_xyz_to);

// Is the angle close to a multiple of 90 degrees?
inline bool is_rotation_ninety_degrees(double a)
{
    a = fmod(std::abs(a), 0.5 * M_PI);
    if (a > 0.25 * PI)
        a = 0.5 * PI - a;
    return a < 0.001;
}

// Is the angle close to a multiple of 90 degrees?
inline bool is_rotation_ninety_degrees(const Vec3d &rotation)
{
    return is_rotation_ninety_degrees(rotation.x()) && is_rotation_ninety_degrees(rotation.y()) && is_rotation_ninety_degrees(rotation.z());
}

} }

#endif