# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-02-27 09:50+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: src/slic3r/GUI/AboutDialog.cpp:46 src/slic3r/GUI/AboutDialog.cpp:306
msgid "Portions copyright"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:143 src/slic3r/GUI/AboutDialog.cpp:270
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:145
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:214
#, possible-c-format, possible-boost-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:245 src/slic3r/GUI/AboutDialog.cpp:370
#: src/slic3r/GUI/GUI_App.cpp:271
msgid "Version"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:272 src/slic3r/GUI/GUI_App.cpp:277
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:273 src/slic3r/GUI/GUI_App.cpp:277
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:274
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:275
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:311
msgid "Copy Version Info"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
#, possible-c-format, possible-boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
#, possible-boost-format
msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
#, possible-boost-format
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:279
msgid "Access violation"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:281
msgid "Illegal instruction"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:283
msgid "Divide by zero"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:285
msgid "Overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:287
msgid "Underflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
msgid "Floating reserved operand"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:293
msgid "Stack overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:652
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:719
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:683
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703
msgid "Unknown error occured during exporting G-code."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:688
#, possible-boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:691
#, possible-boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:694
#, possible-boost-format
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:697
#, possible-boost-format
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:700
#, possible-boost-format
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:708
#, possible-boost-format
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:722
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:738
#, possible-boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1572
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:241 src/slic3r/GUI/Plater.cpp:219
#: src/slic3r/GUI/Tab.cpp:2693
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:32
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:33
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1994
#: src/libslic3r/PrintConfig.cpp:1056
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:49
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:58
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:291
#: src/slic3r/GUI/ConfigWizard.cpp:1796 src/slic3r/GUI/ConfigWizard.cpp:1832
#: src/slic3r/GUI/ConfigWizard.cpp:1846
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
#: src/slic3r/GUI/GCodeViewer.cpp:3449 src/slic3r/GUI/GCodeViewer.cpp:3455
#: src/slic3r/GUI/GCodeViewer.cpp:3463 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:246
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:508
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:528
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1598
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1211
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1977
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:657
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:658
#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
#: src/slic3r/GUI/WipeTowerDialog.cpp:118 src/libslic3r/PrintConfig.cpp:279
#: src/libslic3r/PrintConfig.cpp:303 src/libslic3r/PrintConfig.cpp:310
#: src/libslic3r/PrintConfig.cpp:479 src/libslic3r/PrintConfig.cpp:573
#: src/libslic3r/PrintConfig.cpp:596 src/libslic3r/PrintConfig.cpp:663
#: src/libslic3r/PrintConfig.cpp:671 src/libslic3r/PrintConfig.cpp:721
#: src/libslic3r/PrintConfig.cpp:849 src/libslic3r/PrintConfig.cpp:860
#: src/libslic3r/PrintConfig.cpp:878 src/libslic3r/PrintConfig.cpp:1059
#: src/libslic3r/PrintConfig.cpp:1242 src/libslic3r/PrintConfig.cpp:1306
#: src/libslic3r/PrintConfig.cpp:1316 src/libslic3r/PrintConfig.cpp:1597
#: src/libslic3r/PrintConfig.cpp:1789 src/libslic3r/PrintConfig.cpp:1850
#: src/libslic3r/PrintConfig.cpp:1868 src/libslic3r/PrintConfig.cpp:1886
#: src/libslic3r/PrintConfig.cpp:1942 src/libslic3r/PrintConfig.cpp:1952
#: src/libslic3r/PrintConfig.cpp:2074 src/libslic3r/PrintConfig.cpp:2083
#: src/libslic3r/PrintConfig.cpp:2102 src/libslic3r/PrintConfig.cpp:2123
#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2143
#: src/libslic3r/PrintConfig.cpp:2184 src/libslic3r/PrintConfig.cpp:2192
#: src/libslic3r/PrintConfig.cpp:2202 src/libslic3r/PrintConfig.cpp:2210
#: src/libslic3r/PrintConfig.cpp:2218 src/libslic3r/PrintConfig.cpp:2283
#: src/libslic3r/PrintConfig.cpp:2512 src/libslic3r/PrintConfig.cpp:2579
#: src/libslic3r/PrintConfig.cpp:2594 src/libslic3r/PrintConfig.cpp:2693
#: src/libslic3r/PrintConfig.cpp:2702 src/libslic3r/PrintConfig.cpp:2748
#: src/libslic3r/PrintConfig.cpp:2833 src/libslic3r/PrintConfig.cpp:2843
#: src/libslic3r/PrintConfig.cpp:2967 src/libslic3r/PrintConfig.cpp:3055
#: src/libslic3r/PrintConfig.cpp:3062 src/libslic3r/PrintConfig.cpp:3069
#: src/libslic3r/PrintConfig.cpp:3083 src/libslic3r/PrintConfig.cpp:3107
#: src/libslic3r/PrintConfig.cpp:3117 src/libslic3r/PrintConfig.cpp:3127
#: src/libslic3r/PrintConfig.cpp:3280 src/libslic3r/PrintConfig.cpp:3289
#: src/libslic3r/PrintConfig.cpp:3298 src/libslic3r/PrintConfig.cpp:3308
#: src/libslic3r/PrintConfig.cpp:3349 src/libslic3r/PrintConfig.cpp:3400
#: src/libslic3r/PrintConfig.cpp:3410 src/libslic3r/PrintConfig.cpp:3422
#: src/libslic3r/PrintConfig.cpp:3442 src/libslic3r/PrintConfig.cpp:3461
#: src/libslic3r/PrintConfig.cpp:3471 src/libslic3r/PrintConfig.cpp:3614
#: src/libslic3r/PrintConfig.cpp:3651 src/libslic3r/PrintConfig.cpp:3848
#: src/libslic3r/PrintConfig.cpp:3863 src/libslic3r/PrintConfig.cpp:3877
#: src/libslic3r/PrintConfig.cpp:3888 src/libslic3r/PrintConfig.cpp:3901
#: src/libslic3r/PrintConfig.cpp:3946 src/libslic3r/PrintConfig.cpp:3956
#: src/libslic3r/PrintConfig.cpp:3965 src/libslic3r/PrintConfig.cpp:3975
#: src/libslic3r/PrintConfig.cpp:3991 src/libslic3r/PrintConfig.cpp:4015
#: src/libslic3r/PrintConfig.cpp:4042
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:66
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:81
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:179
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1561
#: src/slic3r/GUI/GUI_ObjectList.cpp:1798
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:203
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:249 src/slic3r/GUI/GCodeViewer.cpp:3914
#: src/slic3r/GUI/MainFrame.cpp:2236
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:273
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:283 src/slic3r/GUI/BedShapeDialog.cpp:354
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/BedShapeDialog.cpp:362
#: src/slic3r/GUI/Tab.cpp:3969
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:317 src/slic3r/GUI/BedShapeDialog.cpp:388
msgid "Not found:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:344
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:506
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:512 src/slic3r/GUI/BedShapeDialog.cpp:560
#: src/slic3r/GUI/BedShapeDialog.cpp:582
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:523
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:531
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:535
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:550
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:572
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:96 src/slic3r/GUI/ConfigWizard.cpp:1732
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:58
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:75 src/slic3r/GUI/BonjourDialog.cpp:253
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:77
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:79
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:227
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:234
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:240
msgid "Multiple resolved IP addresses"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:249
#, possible-boost-format
msgid ""
"There are several IP addresses resolving to hostname %1%.\n"
"Please select one that should be used."
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:21
msgid "Palette 1 (default)"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:22
msgid "Palette 2"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:23
msgid "Palette 3"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:24
msgid "Palette 4"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:25
msgid "Palette 5"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:26
msgid "Palette 6"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:27
msgid "Palette 7"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:28
msgid "Palette 8"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:112
msgid "Revert color to default"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:127
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:128
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:155
msgid "Default palette for mode markers"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2410
#: src/slic3r/GUI/wxExtensions.cpp:759
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2412
#: src/slic3r/GUI/wxExtensions.cpp:759
msgctxt "Mode"
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2413
#: src/slic3r/GUI/wxExtensions.cpp:759
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:182
msgid "Revert color"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:200
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:50
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:51
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1394
#: src/libslic3r/PrintConfig.cpp:299
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:62
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:63 src/libslic3r/PrintConfig.cpp:1238
msgid "First layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:83
#, possible-c-format, possible-boost-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:91
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:92
msgid "Spiral Vase"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:126
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:129
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:130
#: src/slic3r/GUI/ConfigManipulation.cpp:148
msgid "Wipe Tower"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:143 src/libslic3r/Print.cpp:667
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:147
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:169
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:172
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:173
msgid "Support Generator"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:197
#, possible-boost-format
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:199
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:200
#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
#: src/slic3r/GUI/Plater.cpp:467 src/slic3r/GUI/Tab.cpp:1451
#: src/slic3r/GUI/Tab.cpp:1453 src/libslic3r/PrintConfig.cpp:494
#: src/libslic3r/PrintConfig.cpp:758 src/libslic3r/PrintConfig.cpp:778
#: src/libslic3r/PrintConfig.cpp:1134 src/libslic3r/PrintConfig.cpp:1147
#: src/libslic3r/PrintConfig.cpp:1172 src/libslic3r/PrintConfig.cpp:1391
#: src/libslic3r/PrintConfig.cpp:1420 src/libslic3r/PrintConfig.cpp:1484
#: src/libslic3r/PrintConfig.cpp:1504 src/libslic3r/PrintConfig.cpp:1523
#: src/libslic3r/PrintConfig.cpp:2342 src/libslic3r/PrintConfig.cpp:2359
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:353
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:355
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:366
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:368
msgid "Invalid pinhead diameter"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:26 src/libslic3r/PrintConfig.cpp:353
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:29
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1128
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "Active"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63 src/libslic3r/Preset.cpp:1479
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67 src/libslic3r/Preset.cpp:1481
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
#: src/slic3r/GUI/ConfigWizard.cpp:794 src/slic3r/GUI/GUI.cpp:331
#: src/slic3r/GUI/Plater.cpp:850 src/libslic3r/Preset.cpp:1482
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70 src/libslic3r/Preset.cpp:1483
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:74 src/slic3r/GUI/Tab.cpp:1311
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:74
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:77
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:80
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:80
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:92
#, possible-c-format, possible-boost-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:95
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:122
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:291
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:295
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:359
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:359
msgid "Standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:360 src/slic3r/GUI/ConfigWizard.cpp:681
#: src/slic3r/GUI/FileArchiveDialog.cpp:261
#: src/slic3r/GUI/FileArchiveDialog.cpp:283 src/slic3r/GUI/Preferences.cpp:550
#: src/slic3r/GUI/Tab.cpp:4054 src/slic3r/GUI/UnsavedChangesDialog.cpp:1161
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:361 src/slic3r/GUI/ConfigWizard.cpp:682
#: src/slic3r/GUI/DoubleSlider.cpp:2099
#: src/slic3r/GUI/FileArchiveDialog.cpp:265
#: src/slic3r/GUI/FileArchiveDialog.cpp:283
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1984 src/slic3r/GUI/Plater.cpp:438
#: src/slic3r/GUI/Plater.cpp:593 src/slic3r/GUI/Preferences.cpp:552
#: src/libslic3r/PrintConfig.cpp:1294
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:513
#, possible-c-format, possible-boost-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:515
#, possible-c-format, possible-boost-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:517
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:519
#, possible-c-format, possible-boost-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:524
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:527
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:579
#, possible-c-format, possible-boost-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:670
msgid "Printer:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:672
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:673
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:750 src/slic3r/GUI/ConfigWizard.cpp:938
#: src/slic3r/GUI/ConfigWizard.cpp:1024 src/slic3r/GUI/ConfigWizard.cpp:1163
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:754 src/slic3r/GUI/ConfigWizard.cpp:1165
msgid "(Templates)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:789
#, possible-boost-format
msgid ""
"%1% visible for <b>(\"Template\")</b> printer are universal profiles "
"available for all printers. These might not be compatible with your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:789 src/slic3r/GUI/ConfigWizard.cpp:791
#: src/slic3r/GUI/ConfigWizard.cpp:2410 src/slic3r/GUI/ConfigWizard.cpp:3360
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:789 src/slic3r/GUI/ConfigWizard.cpp:791
msgid "SLA materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:791
#, possible-boost-format
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:794
#, possible-boost-format
msgid "All installed printers are compatible with the selected %1%."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:794 src/libslic3r/Preset.cpp:1480
msgid "filament"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:818
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:819
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1213
msgid ""
"You have selected template filament. Please note that these filaments are "
"available for all printers but are NOT certain to be compatible with your "
"printer. Do you still wish to have this filament selected?\n"
"(This message won't be displayed again.)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1214 src/slic3r/GUI/ConfigWizard.cpp:2720
#: src/slic3r/GUI/ConfigWizard.cpp:2860 src/slic3r/GUI/DoubleSlider.cpp:2591
#: src/slic3r/GUI/DoubleSlider.cpp:2612 src/slic3r/GUI/GUI.cpp:245
#: src/slic3r/GUI/GUI_App.cpp:3446 src/slic3r/GUI/UpdateDialogs.cpp:204
#: src/slic3r/GUI/UpdateDialogs.cpp:212 src/slic3r/GUI/UpdateDialogs.cpp:217
#: src/slic3r/GUI/UpdateDialogs.cpp:222 src/slic3r/GUI/UpdateDialogs.cpp:229
#: src/slic3r/GUI/UpdateDialogs.cpp:234
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1262
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1262
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1264
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1265
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1282
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1282
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1290
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1294
#, possible-c-format, possible-boost-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1300 src/slic3r/GUI/Preferences.cpp:306
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1304
#, possible-c-format, possible-boost-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1307
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1312
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1361 src/slic3r/GUI/Preferences.cpp:1076
msgid "Download path"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1366 src/slic3r/GUI/FirmwareDialog.cpp:815
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:300
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1371
msgid "Choose folder:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1409
msgid "Downloads from URL"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1409
msgid "Downloads"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1417
msgid "Allow built-in downloader"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1424
#, possible-c-format, possible-boost-format
msgid ""
"If enabled, %s registers to start on custom URL on www.printables.com. You "
"will be able to use button with %s logo to open models in this %s. The model "
"will be downloaded into folder you choose bellow."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1431
msgid ""
"On Linux systems the process of registration also creates desktop "
"integration files for this version of application."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1458
msgid "Chosen directory for downloads does not Exists."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1545 src/slic3r/GUI/GUI_Factories.cpp:810
#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:3802
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1548
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1552
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1561
msgid "Files association"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1563 src/slic3r/GUI/Preferences.cpp:292
msgid "Associate .3mf files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1564 src/slic3r/GUI/Preferences.cpp:297
msgid "Associate .stl files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1574
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1576
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1581
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1582
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1583
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1596
msgid "The size of the object can be specified in inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1597
msgid "Use inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1617
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1621
#, possible-c-format, possible-boost-format
msgid "Pick another vendor supported by %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1654
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1654 src/slic3r/GUI/Tab.cpp:2350
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1658
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1707 src/slic3r/GUI/ConfigWizard.cpp:1778
#: src/slic3r/GUI/ConfigWizard.cpp:1783 src/slic3r/GUI/ConfigWizard.cpp:1788
#: src/slic3r/GUI/Field.cpp:262 src/slic3r/GUI/Field.cpp:332
#: src/slic3r/GUI/Field.cpp:1589 src/slic3r/GUI/GUI_ObjectLayers.cpp:435
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1732
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1735
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1755
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1606
msgid "Build Volume"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1758
msgid "Set vertical size of your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1795
msgid "Max print height:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1813
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1813
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1828
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1831
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1841
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1842
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1845
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1903
msgid "Nozzle and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1903
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1919
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1920
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1923
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1924 src/slic3r/GUI/ConfigWizard.cpp:1938
#: src/libslic3r/PrintConfig.cpp:437 src/libslic3r/PrintConfig.cpp:1218
#: src/libslic3r/PrintConfig.cpp:1273 src/libslic3r/PrintConfig.cpp:2877
#: src/libslic3r/PrintConfig.cpp:3659
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1933
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1934
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1937
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2410 src/slic3r/GUI/ConfigWizard.cpp:3363
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2464
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2469
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2718
#, possible-boost-format
msgid ""
"Following printer profiles has no default filament: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2719
#, possible-boost-format
msgid ""
"Following printer profiles has no default material: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2883
msgid "The following FFF printer models have no filament selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2887
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2901
msgid "The following SLA printer models have no materials selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2905
msgid "Do you want to select default SLA materials for these printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2947
msgid "Configuration is edited in ConfigWizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3000
msgid "All user presets will be deleted."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3037
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/ConfigWizard.cpp:3069
msgid "Do you want to continue changing the configuration?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3136
msgid "A new Printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3141
msgid "Some Printers were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3162
msgid "A new filament was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3163
msgid "A new SLA material was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3174
msgid "Some filaments were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3174
msgid "Some SLA materials were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3218
msgid "Custom printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3306
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3309
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3310
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3311
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3312
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:657
#: src/slic3r/GUI/FileArchiveDialog.cpp:274
#: src/slic3r/GUI/FileArchiveDialog.cpp:283
#: src/slic3r/GUI/FirmwareDialog.cpp:153
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1589
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1365
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:96
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:907
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1606
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3332
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3340
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3360
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3360 src/slic3r/GUI/ConfigWizard.cpp:3363
#: src/slic3r/GUI/GUI_ObjectList.cpp:4355
msgid "Type:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3363
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3486
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3487
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3489
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3490
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
msgid "Performing desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:383
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:423
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:472
msgid ""
"Performing downloader desktop integration failed - boost::filesystem::"
"canonical did not return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:484
msgid ""
"Performing downloader desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:602
msgid ""
"Performing downloader desktop integration failed because the application "
"directory was not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:626
#: src/slic3r/GUI/GUI_App.cpp:2395
msgid "Desktop Integration"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:633
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:647
msgid "Perform"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:653
#: src/slic3r/GUI/GLCanvas3D.cpp:4811 src/slic3r/GUI/KBShortcutsDialog.cpp:106
#: src/slic3r/GUI/MainFrame.cpp:1422
msgid "Undo"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:109
msgid "Place bearings in slots and resume printing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1448
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1450
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1454 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to move"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1457
#, possible-c-format, possible-boost-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1460
#, possible-c-format, possible-boost-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1465
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1467
msgid "This is wipe tower layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1477
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing sequentually."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1481
msgid "Print mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1495
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1497
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1499
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1500
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1502
msgid "Add another code - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1503
msgid "Add another code - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1509
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1527
msgid "continue"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1535
#, possible-boost-format
msgid "Color change (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1536
#, possible-boost-format
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1538
#, possible-boost-format
msgid "Pause print (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1540
#, possible-boost-format
msgid "Custom template (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1542
#, possible-boost-format
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1549
msgid "Note"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1551
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1554
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1557
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1560
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1565
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1567
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1568
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1671 src/slic3r/GUI/DoubleSlider.cpp:1702
#: src/slic3r/GUI/GUI_Factories.cpp:862
#, possible-c-format, possible-boost-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1672 src/slic3r/GUI/GUI_Factories.cpp:863
msgid "active"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1681
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1681 src/slic3r/GUI/GUI_Factories.cpp:824
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1682
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1684 src/slic3r/GUI/GUI_Factories.cpp:871
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1703
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1711
#, possible-boost-format
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1712
#, possible-boost-format
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2037
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2048
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2052
msgid "Add custom template"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2055
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2073
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2074
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2075
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2081
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2082
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2083
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2084
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2094 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2099
msgid "Hide ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2116
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2120
msgid "Set auto color changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2155
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2156 src/slic3r/GUI/Tab.cpp:1263
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2157
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:524
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:537
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1119 src/slic3r/GUI/GUI.cpp:258
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:720
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:750
#: src/slic3r/GUI/WipeTowerDialog.cpp:60 src/slic3r/GUI/WipeTowerDialog.cpp:445
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2285
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2286
#, possible-boost-format
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2307
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2308
#, possible-boost-format
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the move you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2584
msgid "The last color change data was saved for a single extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2585 src/slic3r/GUI/DoubleSlider.cpp:2601
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2587
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2588 src/slic3r/GUI/DoubleSlider.cpp:2609
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2602
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2605
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2607
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2608
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:150
#, possible-boost-format
msgid ""
"Download won't start. Download URL doesn't point to https://files.printables."
"com : %1%"
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:181
msgid "The download has failed:"
msgstr ""

#: src/slic3r/GUI/DownloaderFileGet.cpp:193
#, possible-boost-format
msgid "Can't create file at %1%."
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:323 src/slic3r/GUI/GUI_ObjectList.cpp:571
#: src/slic3r/GUI/GUI_ObjectList.cpp:583 src/slic3r/GUI/GUI_ObjectList.cpp:1043
#: src/slic3r/GUI/GUI_ObjectList.cpp:2127
#: src/slic3r/GUI/GUI_ObjectList.cpp:3015
#: src/slic3r/GUI/GUI_ObjectList.cpp:4886
#: src/slic3r/GUI/ObjectDataViewModel.cpp:259 src/libslic3r/PrintConfig.cpp:841
msgid "default"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
#: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:1423
#: src/libslic3r/PrintConfig.cpp:2112 src/libslic3r/PrintConfig.cpp:2290
#: src/libslic3r/PrintConfig.cpp:2364 src/libslic3r/PrintConfig.cpp:2612
#: src/libslic3r/PrintConfig.cpp:2659 src/libslic3r/PrintConfig.cpp:2675
msgid "layers"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
msgid "Random sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
msgid "Allow next color repetition"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:190
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:193
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:210 src/slic3r/GUI/OptionsGroup.cpp:839
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1074
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1086
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:233 src/slic3r/GUI/Field.cpp:306
#, possible-c-format, possible-boost-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:273
#, possible-c-format, possible-boost-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""

#: src/slic3r/GUI/Field.cpp:276 src/slic3r/GUI/Field.cpp:351
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/Field.cpp:289 src/slic3r/GUI/Field.cpp:398
#: src/slic3r/GUI/Field.cpp:1601
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:348
#, possible-c-format, possible-boost-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:405
#, possible-boost-format
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:170
msgid "Archive preview"
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:270
#: src/slic3r/GUI/FileArchiveDialog.cpp:283
msgid "Open"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:154
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:201
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:285
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:333
#, possible-c-format, possible-boost-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455
#, possible-c-format, possible-boost-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:437
#, possible-c-format, possible-boost-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:549
#, possible-c-format, possible-boost-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:650
#, possible-c-format, possible-boost-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:652
#, possible-c-format, possible-boost-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:787
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:812
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Select a file"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:819
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:827
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:830
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:831
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:851
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:862
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:358
#: src/slic3r/GUI/Mouse3DController.cpp:543
#: src/slic3r/GUI/PrintHostDialogs.cpp:312
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:125
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:915
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:916
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:919
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1484
msgid "Shape Gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:76
msgid "Select shape from the gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:114 src/slic3r/GUI/Tab.cpp:4373
msgid "Add"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:114
msgid "Add one or more custom shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:115 src/slic3r/GUI/GalleryDialog.cpp:528
#: src/slic3r/GUI/GLCanvas3D.cpp:4612
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1945
#: src/slic3r/GUI/GUI_Factories.cpp:460 src/slic3r/GUI/Tab.cpp:3969
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:115
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:142
msgid "Add to bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:142
msgid "OK"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:143
msgid "Add selected shape(s) to the bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:422
msgid "Choose one or more files (STL, OBJ):"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:462
#, possible-boost-format
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:473
msgid "Choose one PNG file:"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:486
msgid "Replacing of the PNG"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:530
msgid "Change thumbnail"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:571 src/slic3r/GUI/GalleryDialog.cpp:576
#, possible-boost-format
msgid "Loading of the \"%1%\""
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:343
msgid "Tool position"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1547
msgid "Generating toolpaths"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1619
msgid "Generating vertex buffer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1979
msgid "Generating index buffers"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3271
msgid "Click to hide"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3271
msgid "Click to show"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3449
msgid "up to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3455
msgid "above"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3463
msgid "from"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3463
msgid "to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3513 src/slic3r/GUI/GCodeViewer.cpp:3514
#: src/slic3r/GUI/GCodeViewer.cpp:3592
msgid "Percentage"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3524 src/slic3r/GUI/GCodeViewer.cpp:3570
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3524 src/slic3r/GUI/GCodeViewer.cpp:3592
#: src/slic3r/GUI/RammingChart.cpp:90
msgid "Time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3571
msgid "Height (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3572
msgid "Width (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3573
msgid "Speed (mm/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3574
msgid "Fan speed (%)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3575
msgid "Temperature (°C)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3576
msgid "Volumetric flow rate (mm³/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3577
msgid "Layer time (linear)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3578
msgid "Layer time (logarithmic)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3579
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3580
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3592 src/slic3r/GUI/GCodeViewer.cpp:3594
#: src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Used filament"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3623 src/slic3r/GUI/GCodeViewer.cpp:4067
#: src/libslic3r/PrintConfig.cpp:2972
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3640 src/slic3r/GUI/GCodeViewer.cpp:3685
#: src/slic3r/GUI/GCodeViewer.cpp:3689 src/slic3r/GUI/GUI_ObjectList.cpp:338
#: src/slic3r/GUI/wxExtensions.cpp:547 src/libslic3r/PrintConfig.cpp:835
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3662
msgid "Default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3685
msgid "default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3785 src/slic3r/GUI/GCodeViewer.cpp:3841
msgid "Color change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3804 src/slic3r/GUI/GCodeViewer.cpp:3839
msgid "Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3840 src/slic3r/GUI/GCodeViewer.cpp:3874
msgid "Pause"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Event"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Remaining time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3857 src/slic3r/GUI/GCodeViewer.cpp:3860
msgid "Duration"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3928 src/slic3r/GUI/GUI.cpp:332
#: src/slic3r/GUI/Plater.cpp:851 src/libslic3r/PrintConfig.cpp:335
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3931 src/slic3r/GUI/GUI.cpp:328
#: src/slic3r/GUI/Plater.cpp:847
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3936 src/slic3r/GUI/GUI.cpp:330
#: src/slic3r/GUI/Plater.cpp:848 src/slic3r/GUI/Tab.cpp:1938
#: src/slic3r/GUI/Tab.cpp:1939
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3950
msgid "Estimated printing times"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3969
msgid "Normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3970
msgid "Stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3979 src/libslic3r/PrintConfig.cpp:1196
#: src/libslic3r/PrintConfig.cpp:1214 src/libslic3r/PrintConfig.cpp:1224
#: src/libslic3r/PrintConfig.cpp:1269
msgid "First layer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3983
msgid "Total"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4002
msgid "Show stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4006
msgid "Show normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4071
msgid "Wipe"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4075
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4079
msgid "Deretractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4083
msgid "Seams"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4087
msgid "Tool changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4091
msgid "Color changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4095
msgid "Print pauses"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4099
msgid "Custom G-codes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4103
msgid "Center of gravity"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4108
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4113
msgid "Tool marker"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:185 src/slic3r/GUI/GLCanvas3D.cpp:4758
#: src/slic3r/GUI/ObjectDataViewModel.cpp:71
msgid "Variable layer height"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:187
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:189
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:191
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:193
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:195
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:197
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:199
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:201
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:203
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:205
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:208
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:214
msgid "Quality / Speed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:217
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:228
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:234 src/libslic3r/PrintConfig.cpp:855
msgid "Radius"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:246
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:255 src/slic3r/GUI/GLCanvas3D.cpp:4191
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:602
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:717
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1319
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1327
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1335
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1778
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2542 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:117
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2638
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:667
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3263
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3513
#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3878 src/slic3r/GUI/GLCanvas3D.cpp:4718
msgid "Switch to Settings"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3879 src/slic3r/GUI/GLCanvas3D.cpp:4718
msgid "Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3880 src/slic3r/GUI/GLCanvas3D.cpp:4719
msgid "Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3880 src/slic3r/GUI/GLCanvas3D.cpp:4719
msgid "Material Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3881 src/slic3r/GUI/GLCanvas3D.cpp:4720
msgid "Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4041
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4041
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4061
#, possible-c-format, possible-boost-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4061
#, possible-c-format, possible-boost-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4080 src/slic3r/GUI/GLCanvas3D.cpp:4736
#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Search.cpp:482
msgid "Search"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4094 src/slic3r/GUI/GLCanvas3D.cpp:4102
#: src/slic3r/GUI/Search.cpp:488
msgid "Enter a search term"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4134
msgid "Arrange options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4167
#, possible-boost-format
msgid "Press %1%left mouse button to enter the exact value"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4169
msgid "Spacing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4176
msgid "Spacing from bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4183
msgid "Enable rotations (slow)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4202 src/slic3r/GUI/GLCanvas3D.cpp:4630
#: src/slic3r/GUI/KBShortcutsDialog.cpp:141 src/slic3r/GUI/Plater.cpp:7288
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4604
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4621 src/slic3r/GUI/KBShortcutsDialog.cpp:105
#: src/slic3r/GUI/Plater.cpp:6232 src/slic3r/GUI/Tab.cpp:4379
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4630 src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4630
msgid "Click right mouse button to show arrangement options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4650
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4659
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4671 src/slic3r/GUI/GUI_Factories.cpp:1237
#: src/slic3r/GUI/GUI_Factories.cpp:1261 src/slic3r/GUI/GUI_Factories.cpp:1272
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4682 src/slic3r/GUI/GUI_Factories.cpp:1240
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4695
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4705
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4811 src/slic3r/GUI/GLCanvas3D.cpp:4848
msgid "Click right mouse button to open/close History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4833
#, possible-boost-format
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4848 src/slic3r/GUI/KBShortcutsDialog.cpp:107
#: src/slic3r/GUI/MainFrame.cpp:1425
msgid "Redo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4869
#, possible-boost-format
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6756
msgid "An object outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6757
msgid "A toolpath outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6758
msgid "SLA supports outside the print area were detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6759
msgid "Some objects are not visible during editing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6761
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6836
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6851
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
msgid "Planar"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:210
msgid "Auto"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:210
msgid "Manual"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:213
msgid "Plug"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:214
msgid "Dowel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:222
msgid "Prism"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:222
msgid "Frustum"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226
msgid "Triangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226
msgid "Square"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226
msgid "Hexagon"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:67
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
msgid "Circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:233
msgid "Keep orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:234
msgid "Place on cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
msgid "Flip upside down"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:246
msgid "inch"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:249
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1766
#: src/slic3r/GUI/GUI_ObjectList.cpp:4141
#: src/slic3r/GUI/GUI_ObjectList.cpp:4333
msgid "Part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:249
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1766 src/libslic3r/Print.cpp:1231
msgid "Object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:264
msgid ""
"Click to flip the cut plane\n"
"Drag to move the cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:269 src/libslic3r/PrintConfig.cpp:498
#: src/libslic3r/PrintConfig.cpp:1138 src/libslic3r/PrintConfig.cpp:2262
#: src/libslic3r/PrintConfig.cpp:2272 src/libslic3r/PrintConfig.cpp:2560
#: src/libslic3r/PrintConfig.cpp:2793 src/libslic3r/PrintConfig.cpp:2812
#: src/libslic3r/PrintConfig.cpp:2823 src/libslic3r/PrintConfig.cpp:2854
#: src/libslic3r/PrintConfig.cpp:3076 src/libslic3r/PrintConfig.cpp:3178
#: src/libslic3r/PrintConfig.cpp:3432 src/libslic3r/PrintConfig.cpp:3921
msgid "°"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:367
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:571
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1229
msgid "Move cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:508
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:528
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1598
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1211
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1977
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:657
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:658
msgid "in"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:544
msgid "Value"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:549
msgid "Tolerance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:865
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:868
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:869
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1260
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1263
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1264
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:865
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2335
msgid "Add connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:866
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1261
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:866
msgid "Remove connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:867
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1262
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:867
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1213
msgid "Move connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:868
msgid "Add connector to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:869
msgid "Remove connector from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:870
msgid "Select all connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:894 src/libslic3r/PrintConfig.cpp:4612
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1224
msgid "Rotate cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1444
msgid "Render cut plane as circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1533
msgid "Connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1537
msgid "Remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1546
msgid "Type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1557 src/libslic3r/PrintConfig.cpp:2763
msgid "Style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1564
msgid "Depth ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1582
msgid "Confirm connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1648
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1662
msgid "Flip cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1706
msgid "Hold SHIFT key to draw a cut line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1712
msgid "Cut position: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1721
msgid "Reset cutting plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1733
msgid "Edit connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1733
msgid "Add connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1740
msgid "Reset cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1741
msgid "Reset cutting plane and remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1796
msgid "After cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1816
msgid "Cut to"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1819
msgid "Objects"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1822
msgid "Parts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1836
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1926
msgid "Invalid connectors detected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1928
#, possible-c-format, possible-boost-format
msgid "%1$d connector is out of cut contour"
msgid_plural "%1$d connectors are out of cut contour"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1931
#, possible-c-format, possible-boost-format
msgid "%1$d connector is out of object"
msgid_plural "%1$d connectors are out of object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1934
msgid "Some connectors are overlapped"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1938
msgid ""
"Invalid state. \n"
"No one part is selected for keep after cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1940
msgid ""
"Warning state. \n"
"Cut plane is placed out of object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2140
msgid "Connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2170
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2310
msgid "Cut by line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2360
msgid "Delete connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:252
msgid "Entering Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:253
msgid "Leaving Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:254
msgid "Cut gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:601
msgid "Emboss"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:866
msgid "ERROR: Wait until ends or Cancel process."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:921
msgid "Text-Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:953
msgid "Font"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:954
#: src/libslic3r/PrintConfig.cpp:844
msgid "Height"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:955
msgid "Depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:963
msgid "Use surface"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:964
msgid "Char gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:965
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1653
msgid "Line gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:966
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1651
msgid "Boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:967
msgid "Skew ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:968
msgid "Z-move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:969
msgid "Z-rot"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:970
msgid "Collection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1047
msgid "NORMAL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1048
msgid "SMALL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1049
msgid "ITALIC"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1050
msgid "SWISS"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1051
msgid "MODERN"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1088
msgid "First font"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1093
msgid "Default font"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1098
msgid "Embossed text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1513
msgid "Warning: No font is selected. Select correct one."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1531
#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1438
#: src/slic3r/GUI/Tab.cpp:1473 src/slic3r/GUI/Tab.cpp:1615
#: src/slic3r/GUI/Tab.cpp:1619 src/slic3r/GUI/Tab.cpp:2002
#: src/slic3r/GUI/Tab.cpp:2386 src/slic3r/GUI/Tab.cpp:4981
#: src/libslic3r/PrintConfig.cpp:276 src/libslic3r/PrintConfig.cpp:514
#: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1513
#: src/libslic3r/PrintConfig.cpp:1560 src/libslic3r/PrintConfig.cpp:2509
#: src/libslic3r/PrintConfig.cpp:2519 src/libslic3r/PrintConfig.cpp:3113
#: src/libslic3r/PrintConfig.cpp:3147 src/libslic3r/PrintConfig.cpp:3158
#: src/libslic3r/PrintConfig.cpp:3173 src/libslic3r/PrintConfig.cpp:3186
#: src/libslic3r/PrintConfig.cpp:3195 src/libslic3r/PrintConfig.cpp:3207
#: src/libslic3r/PrintConfig.cpp:3612
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1631
msgid "Can't write text by selected font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1632
msgid "Try to choose another font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1645
msgid "Empty"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1645
msgid "Embossed text can NOT contain only white spaces."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1647
msgid "Bad symbol"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1647
msgid "Text contain character glyph (represented by '?') unknown by font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1650
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:528
msgid "Skew"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1650
msgid "Unsupported visualization of font skew for text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1651
msgid "Unsupported visualization of font boldness for text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1653
msgid "Unsupported visualization of gap between lines inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1657
msgid "Too tall"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1657
msgid "Diminished font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1659
msgid "Too small"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1659
msgid "Enlarged font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1660
#, possible-boost-format
msgid "%1% is NOT shown."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1964
msgid " No symbol"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1965
msgid " ... Loading"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2015
msgid " ... In queue"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2132
#, possible-boost-format
msgid "Font face \"%1%\" can't be selected."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2180
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:760
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:367
msgid "Apply"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2192
msgid "add file with font(.ttf, .ttc)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2202
msgid "Open dialog for choose from fonts."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2210
msgid "Text is to object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2224
msgid "Added"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2227
msgid "Click to change text into object part."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2230
#: src/slic3r/GUI/GUI_ObjectList.cpp:4323
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2231
msgid "Subtracted"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2237
msgid "Click to change part type into negative volume."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2243
#: src/slic3r/GUI/GUI_ObjectList.cpp:4340
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2249
msgid "Click to change part type into modifier."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2256
msgid "Change Text Type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2287
#, possible-boost-format
msgid "Rename style(%1%) for embossing text: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2299
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2384
msgid "Name can't be empty."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2301
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2386
msgid "Name has to be unique."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2310
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2397
msgid "ok"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2312
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2401
msgid "cancel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2337
msgid "Rename style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2344
msgid "Rename current style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2345
msgid "Can't rename temporary style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2362
msgid "First Add style to list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2364
#, possible-boost-format
msgid "Save %1% style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2366
msgid "No changes to save."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2373
msgid "New name of style: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2422
msgid "Save as new style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2434
msgid "Only valid font can be added to style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2436
msgid "Add style to my list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2438
msgid "Add as new named style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2454
msgid "Remove style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2485
#, possible-boost-format
msgid "Delete \"%1%\" style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2486
#, possible-boost-format
msgid "Can't delete \"%1%\". It is last style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2487
#, possible-boost-format
msgid "Can't delete temporary style \"%1%\"."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2494
#, possible-boost-format
msgid ""
"Are you sure,\n"
"that you want permanently and unrecoverable \n"
"remove style \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2496
msgid "Yes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2505
msgid "No"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2555
msgid "Presets"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2564 src/slic3r/GUI/GUI_App.cpp:2312
msgid "modified"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2617
#, possible-boost-format
msgid "Modified style \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2618
#, possible-boost-format
msgid "Current style is \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2625
msgid "Style modification will be lost."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2627
#, possible-boost-format
msgid ""
"Changing style to '%1%' will discard current style modification.\n"
"\n"
" Would you like to continue anyway?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2643
msgid "Not valid style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2644
#, possible-boost-format
msgid "Style '%1%' can't be used and will be removed from list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2691
msgid "Unset italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2708
msgid "Set italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2738
msgid "Unset bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2756
msgid "Set bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2922
msgid "WxFont is not loaded properly."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2957
msgid "Revert font changes."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2991
msgid "wx Make bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3002
msgid "Revert text size."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3029
msgid "Revert embossed depth."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3178
msgid ""
"Advanced font options could be changed only for correct font.\n"
"Start with select correct font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3219
msgid "Revert using of model surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3232
msgid "font points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3241
msgid "Revert gap between letters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3242
msgid "Distance between letters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3257
msgid "Revert gap between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3258
msgid "Distance between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3272
msgid "Undo boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3273
msgid "Tiny / Wide glyphs"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3283
msgid "Undo letter's skew"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3284
msgid "Italic strength ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3304
msgid "Undo translation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3305
msgid "Distance of the center of text from model surface"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3350
msgid "Undo rotation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3352
msgid "Rotate text Clock-wise."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3386
msgid "Select from True Type Collection."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3395
msgid "Set text to face camera"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3402
msgid "Use camera direction for text orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3486
#, possible-boost-format
msgid "Font '%1%' can't be used. Please select another."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3488
msgid "Selected font is NOT True-type."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3512
msgid "Choose one or more files (TTF, TTC):"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3539
msgid "Choose SVG file:"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3600
#, possible-boost-format
msgid ""
"Can't load exactly same font(\"%1%\"), Aplication selected a similar "
"one(\"%2%\"). You have to specify font for enable edit text."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:81
msgid "Enter emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:82
msgid "Leave emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:83
msgid "Embossing actions"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:37
#: src/slic3r/GUI/ObjectDataViewModel.cpp:66
msgid "Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
msgid "Automatic painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "painting..."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
msgid "Brush shape"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1816
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
msgid "Enforce supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Right mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:573
msgid "Block supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Shift + Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:568
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:247
msgid "Remove selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Remove all selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:106
#: src/libslic3r/PrintConfig.cpp:1178
msgid "Triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
msgid "Highlight overhang by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63
msgid "Enforce"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
msgid "Tool type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
msgid "Brush"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
msgid "Smart fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Smart fill angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:72
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Split triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:73
msgid "On overhangs only"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:187
#, possible-boost-format
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:230
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:371
msgid "Paints facets according to the chosen painting brush."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:238
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:384
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242
#, possible-boost-format
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:257
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:412
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
msgid "Paints all facets inside, regardless of their orientation."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:266
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:421
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149
msgid "Ignores facets facing away from the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:275
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:430
msgid "Paints only one facet."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:283
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:298
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:438
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:455
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:129
msgid "Alt + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:288
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:321
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:476
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:167
msgid "Ctrl + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:326
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:481
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:172
msgid "Reset selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:382
msgid "Block supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:383
msgid "Add supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:524
msgid "Automatic painting requires valid print setup."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:535
msgid "Automatic painting will erase all currently painted areas."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:536
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1118
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:540
msgid "Automatic painting support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:571
msgid "Add supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:22
msgid "Entering Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:23
msgid "Leaving Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:24
msgid "Paint-on supports editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:88
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:29
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
#: src/libslic3r/PrintConfig.cpp:4007
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:242
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:361
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:655
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:739
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:827
msgid "Hollow and drill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:869
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:64
msgid "No feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:65
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:76
msgid "Vertex"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:66
msgid "Edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:68
msgid "Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77
msgid "Point on edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:78
msgid "Point on circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:79
msgid "Point on plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:89
msgid "Center of edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:90
msgid "Center of circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:554
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2029
msgid "Measure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1236
msgid "Edit to scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1258
#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:161
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:236
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:769
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:787
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:810
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:824
#: src/libslic3r/PrintConfig.cpp:4681
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1362
msgctxt "Verb"
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1541
msgid "##angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1740
msgid "Measure tool debug"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1824
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1851
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1857
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1886
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1893
msgid "Unselect feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1830
msgid "Unselect center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1835
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1862
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1898
msgid "Select center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1840
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1867
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1903
msgid "Unselect point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1846
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1873
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1878
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1910
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1915
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1923
msgid "Select feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1878
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1915
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1923
msgid "Select point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1940
msgid "Shift"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1940
msgid "Enable point selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1945
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2007
msgid "Restart selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1952
msgid "Esc"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1955
msgid "Unselect"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1999
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2001
msgid "Selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2021
#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2038
msgid "Angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2052
msgid "Perpendicular distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2052
msgid "Distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2062
msgid "Direct distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2072
msgid "Distance XYZ"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:163
msgid "Entering Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:164
msgid "Leaving Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:165
msgid "Measure gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:28
#, possible-boost-format
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46
#: src/slic3r/GUI/ObjectDataViewModel.cpp:69
msgid "Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
msgid "First color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
msgid "Second color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:642
msgid "Remove painted color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "Clear all"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
msgid "Bucket fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:397
msgid "Paints neighboring facets that have the same color."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:443
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:645
#, possible-boost-format
msgid "Painted using: Extruder %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:118
msgid "Entering Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:119
msgid "Leaving Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:120
msgid "Multimaterial painting editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:76
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:649
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:738
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:768
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:806
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:823
#: src/libslic3r/PrintConfig.cpp:4666
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:713
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:194
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250
msgid "Enforce seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:252
msgid "Block seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
msgid "Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:23
msgid "Entering Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:24
msgid "Leaving Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:25
msgid "Paint-on seam editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:105
msgid "Mesh name"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:107
msgid "Detail level"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:108
msgid "Decimate ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:147
#, possible-boost-format
msgid ""
"Processing model '%1%' with more than 1M triangles could be slow. It is "
"highly recommended to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:150
#: src/slic3r/GUI/GUI_Factories.cpp:789
msgid "Simplify model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:177
msgid "Simplify"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:190
msgid "Simplification is currently only allowed when a single part is selected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:191
#: src/slic3r/GUI/MainFrame.cpp:1246 src/slic3r/GUI/MainFrame.cpp:1712
#: src/slic3r/GUI/PrintHostDialogs.cpp:424
msgid "Error"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:294
msgid "Extra high"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295
msgid "High"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:296
msgid "Medium"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297
msgid "Low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:298
msgid "Extra low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322
#, possible-boost-format
msgid ""
"Multipart object can be simplified only by %1%. If you want specify %2% "
"process it separately."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:352
#, possible-c-format, possible-boost-format
msgid "%d triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:355
msgid "Show wireframe"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:361
msgid "Operation already cancelling. Please wait few seconds."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:370
msgid "Can't apply when proccess preview."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:377
#, possible-boost-format
msgid "Process %1% / 100"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:542
msgid "Simplify "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:543
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"simplifying the mesh."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:67
msgid "Entering SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:68
msgid "Leaving SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:35
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:36
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:37
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:38
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
#: src/libslic3r/PrintConfig.cpp:3837
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:307
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:460
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:626
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:696
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:806
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:814
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:815
msgid "Save support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:880
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:987
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1117
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1124
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1260
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1261
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1262
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1263
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1264
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:204
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:998
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:287
msgid "Undefined"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:308
#, possible-boost-format
msgid "%1% was substituted with %2%"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:317
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:318
msgid "The following values were substituted:"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:319
msgid "Review the substitutions and adjust them if needed."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:329 src/slic3r/GUI/Plater.cpp:849
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:333 src/slic3r/GUI/PhysicalPrinterDialog.cpp:158
msgid "Physical Printer"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:346
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:356
#, possible-boost-format
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:275
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:276
msgid "Developed by Prusa Research."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:278
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:279
msgid "Artwork model by Creative Tools"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:420
#, possible-boost-format
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:428
#, possible-c-format, possible-boost-format
msgid "%s - BREAKING CHANGE"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:430
msgid "Quit, I will move my data now"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:430
msgid "Start the application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:723
#, possible-c-format, possible-boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:726
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:730
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:733
msgid "Critical error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:738
#, possible-boost-format
msgid "Internal error: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:956 src/slic3r/GUI/GUI_App.cpp:1053
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:962 src/slic3r/GUI/GUI_App.cpp:1059
msgid ""
"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1008
#, possible-boost-format
msgid "You are opening %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1011
#, possible-boost-format
msgid ""
"The active configuration was created by <b>%1% %2%</b>,\n"
"while a newer configuration was found in <b>%3%</b>\n"
"created by <b>%1% %4%</b>.\n"
"\n"
"Shall the newer configuration be imported?\n"
"If so, your active configuration will be backed up before importing the new "
"configuration."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1019
#, possible-boost-format
msgid ""
"An existing configuration was found in <b>%3%</b>\n"
"created by <b>%1% %2%</b>.\n"
"\n"
"Shall this configuration be imported?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1027
msgid "Import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1028
msgid "Don't import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1036
msgid "Continue and import newer configuration?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1097
msgid ""
"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
"available in the system.\n"
"Please download and install a 64 bit build of PrusaSlicer from https://www."
"prusa3d.cz/prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1184
#, possible-c-format, possible-boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1186 src/slic3r/GUI/GUI_App.cpp:3290
#: src/slic3r/GUI/Plater.cpp:1735 src/slic3r/GUI/UnsavedChangesDialog.cpp:917
msgid "Remember my choice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1228
msgid "Loading configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1259
#, possible-boost-format
msgid "New prerelease version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1260
msgid "See Releases page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1315
msgid "Preparing settings tabs"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1392 src/slic3r/GUI/Preferences.cpp:405
msgid "Restore window position on start"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1394
msgid "PrusaSlicer started after a crash"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1395
#, possible-boost-format
msgid ""
"PrusaSlicer crashed last time when attempting to set window position.\n"
"We are sorry for the inconvenience, it unfortunately happens with certain "
"multiple-monitor setups.\n"
"More precise reason for the crash: \"%1%\".\n"
"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
"\n"
"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
"Otherwise, the application will most likely crash again next time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1407
#, possible-boost-format
msgid "Disable \"%1%\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1408
#, possible-boost-format
msgid "Leave \"%1%\" enabled"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1779
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1783
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1785
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1789 src/slic3r/GUI/PhysicalPrinterDialog.cpp:797
msgid "Information"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1802 src/slic3r/GUI/GUI_App.cpp:1813
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1816
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1821
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1960
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1972
msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1984
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1995
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2136
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2136
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2351
msgid ""
"Simple mode supports manipulation with single-part object(s)\n"
"or object(s) with support modifiers only."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2353
msgid "Please check your object list before mode changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2354
msgid "Change application mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2385
#, possible-c-format, possible-boost-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2389
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2389
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2390
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2390
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2391
msgid "Check for Configuration Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2391
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2392
msgid "Check for Application Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2392
msgid "Check for new version of application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2399
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2405
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2410
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2412
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2413
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2418
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2418
#, possible-c-format, possible-boost-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2421
msgid "&Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2424
msgid "Flash Printer &Firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2424
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2447
msgid "Taking a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2448
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2449
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2465
msgid "Loading a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2474
#, possible-boost-format
msgid "Continue to activate a configuration snapshot %1%?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2488
msgid "Failed to activate configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2508
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2511
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2513 src/slic3r/GUI/Preferences.cpp:730
#: src/slic3r/GUI/Selection.cpp:1689
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2540
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2548
msgid "Restart application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2714
msgid "For new project all modifications will be reseted"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2752
msgid "Loading a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2755
msgid "Project is loading"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2755
msgid "Opening new project while some presets are unsaved."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2774
msgid "The uploads are still ongoing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2774
msgid "Stop them and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2778
msgid "Ongoing uploads"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3014
msgid ""
"It's impossible to print object(s) which contains parameter modifiers with "
"SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3015 src/slic3r/GUI/Jobs/SLAImportJob.cpp:149
#: src/slic3r/GUI/Plater.cpp:2535
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3058
msgid "Configuration is editing from ConfigWizard"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3076
#, possible-boost-format
msgid "Welcome to %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3078
#, possible-boost-format
msgid ""
"Do you wish to register downloads from <b>Printables.com</b>\n"
"for this <b>%1% %2%</b> executable?\n"
"\n"
"Downloads can be registered for only 1 executable at time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3106
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3289 src/slic3r/GUI/GUI_App.cpp:3312
msgid "Open hyperlink in default browser?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3289 src/slic3r/GUI/GUI_App.cpp:3312
msgid "PrusaSlicer: Open hyperlink"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3294 src/slic3r/GUI/Preferences.cpp:593
msgid "Suppress to open hyperlink in browser"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3296 src/slic3r/GUI/Plater.cpp:1741
msgid "PrusaSlicer will remember your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3297
msgid "You will not be asked about it again on hyperlinks hovering."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3298 src/slic3r/GUI/Plater.cpp:1745
#, possible-boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to changes your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3300 src/slic3r/GUI/Plater.cpp:1747
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:934
msgid "PrusaSlicer: Don't ask me again"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3374
msgid "Check for application update has failed."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3375
#, possible-boost-format
msgid "No new version is available. Latest release version is %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3446
msgid "Download of new version is already ongoing. Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:64 src/slic3r/GUI/GUI_Init.cpp:67
msgid "PrusaSlicer GUI initialization failed"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:67
#, possible-boost-format
msgid "Fatal error, exception catched: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
#: src/libslic3r/PrintConfig.cpp:300 src/libslic3r/PrintConfig.cpp:423
#: src/libslic3r/PrintConfig.cpp:466 src/libslic3r/PrintConfig.cpp:475
#: src/libslic3r/PrintConfig.cpp:750 src/libslic3r/PrintConfig.cpp:811
#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:828
#: src/libslic3r/PrintConfig.cpp:1239 src/libslic3r/PrintConfig.cpp:1323
#: src/libslic3r/PrintConfig.cpp:1551 src/libslic3r/PrintConfig.cpp:1932
#: src/libslic3r/PrintConfig.cpp:2007 src/libslic3r/PrintConfig.cpp:2241
#: src/libslic3r/PrintConfig.cpp:2885 src/libslic3r/PrintConfig.cpp:2893
#: src/libslic3r/PrintConfig.cpp:2953 src/libslic3r/PrintConfig.cpp:2962
#: src/libslic3r/PrintConfig.cpp:3133
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
#: src/slic3r/GUI/Tab.cpp:1495 src/slic3r/GUI/Tab.cpp:1497
#: src/libslic3r/PrintConfig.cpp:712 src/libslic3r/PrintConfig.cpp:2072
#: src/libslic3r/PrintConfig.cpp:2081 src/libslic3r/PrintConfig.cpp:2090
#: src/libslic3r/PrintConfig.cpp:2100 src/libslic3r/PrintConfig.cpp:2109
#: src/libslic3r/PrintConfig.cpp:2531 src/libslic3r/PrintConfig.cpp:2537
#: src/libslic3r/PrintConfig.cpp:2545 src/libslic3r/PrintConfig.cpp:2558
#: src/libslic3r/PrintConfig.cpp:2568 src/libslic3r/PrintConfig.cpp:2575
#: src/libslic3r/PrintConfig.cpp:2591 src/libslic3r/PrintConfig.cpp:2607
#: src/libslic3r/PrintConfig.cpp:2628 src/libslic3r/PrintConfig.cpp:2641
#: src/libslic3r/PrintConfig.cpp:2657 src/libslic3r/PrintConfig.cpp:2672
#: src/libslic3r/PrintConfig.cpp:2690 src/libslic3r/PrintConfig.cpp:2700
#: src/libslic3r/PrintConfig.cpp:2709 src/libslic3r/PrintConfig.cpp:2720
#: src/libslic3r/PrintConfig.cpp:2732 src/libslic3r/PrintConfig.cpp:2746
#: src/libslic3r/PrintConfig.cpp:2754 src/libslic3r/PrintConfig.cpp:2755
#: src/libslic3r/PrintConfig.cpp:2764 src/libslic3r/PrintConfig.cpp:2778
#: src/libslic3r/PrintConfig.cpp:2787 src/libslic3r/PrintConfig.cpp:2801
#: src/libslic3r/PrintConfig.cpp:2809 src/libslic3r/PrintConfig.cpp:2820
#: src/libslic3r/PrintConfig.cpp:2831 src/libslic3r/PrintConfig.cpp:2840
#: src/libslic3r/PrintConfig.cpp:2850 src/libslic3r/PrintConfig.cpp:2862
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
#: src/libslic3r/PrintConfig.cpp:3089 src/libslic3r/PrintConfig.cpp:3097
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:65
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/Tab.cpp:1461
#: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1573
#: src/libslic3r/PrintConfig.cpp:1585 src/libslic3r/PrintConfig.cpp:1595
#: src/libslic3r/PrintConfig.cpp:1603 src/libslic3r/PrintConfig.cpp:1605
msgid "Ironing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1290
#: src/libslic3r/PrintConfig.cpp:1291 src/libslic3r/PrintConfig.cpp:1303
#: src/libslic3r/PrintConfig.cpp:1313
msgid "Fuzzy Skin"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/Tab.cpp:1537
#: src/libslic3r/PrintConfig.cpp:526 src/libslic3r/PrintConfig.cpp:536
#: src/libslic3r/PrintConfig.cpp:543 src/libslic3r/PrintConfig.cpp:558
#: src/libslic3r/PrintConfig.cpp:799 src/libslic3r/PrintConfig.cpp:1330
#: src/libslic3r/PrintConfig.cpp:1524 src/libslic3r/PrintConfig.cpp:1604
#: src/libslic3r/PrintConfig.cpp:1997 src/libslic3r/PrintConfig.cpp:2330
#: src/libslic3r/PrintConfig.cpp:2383 src/libslic3r/PrintConfig.cpp:2938
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1593
#: src/slic3r/GUI/Tab.cpp:2284 src/libslic3r/PrintConfig.cpp:836
#: src/libslic3r/PrintConfig.cpp:1477 src/libslic3r/PrintConfig.cpp:1974
#: src/libslic3r/PrintConfig.cpp:2351 src/libslic3r/PrintConfig.cpp:2620
#: src/libslic3r/PrintConfig.cpp:2648
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:787
#: src/libslic3r/PrintConfig.cpp:900 src/libslic3r/PrintConfig.cpp:1225
#: src/libslic3r/PrintConfig.cpp:1485 src/libslic3r/PrintConfig.cpp:1983
#: src/libslic3r/PrintConfig.cpp:2371 src/libslic3r/PrintConfig.cpp:2629
#: src/libslic3r/PrintConfig.cpp:2925
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1481
#: src/libslic3r/PrintConfig.cpp:570 src/libslic3r/PrintConfig.cpp:581
#: src/libslic3r/PrintConfig.cpp:594
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:434
#: src/slic3r/GUI/Tab.cpp:4942 src/slic3r/GUI/Tab.cpp:4944
#: src/libslic3r/PrintConfig.cpp:3278 src/libslic3r/PrintConfig.cpp:3287
#: src/libslic3r/PrintConfig.cpp:3296 src/libslic3r/PrintConfig.cpp:3306
#: src/libslic3r/PrintConfig.cpp:3316 src/libslic3r/PrintConfig.cpp:3345
#: src/libslic3r/PrintConfig.cpp:3372 src/libslic3r/PrintConfig.cpp:3379
#: src/libslic3r/PrintConfig.cpp:3398 src/libslic3r/PrintConfig.cpp:3408
#: src/libslic3r/PrintConfig.cpp:3417 src/libslic3r/PrintConfig.cpp:3430
#: src/libslic3r/PrintConfig.cpp:3440 src/libslic3r/PrintConfig.cpp:3458
#: src/libslic3r/PrintConfig.cpp:3468 src/libslic3r/PrintConfig.cpp:3811
#: src/libslic3r/PrintConfig.cpp:3831 src/libslic3r/PrintConfig.cpp:3838
#: src/libslic3r/PrintConfig.cpp:3846
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:589
#: src/slic3r/GUI/Tab.cpp:4956 src/slic3r/GUI/Tab.cpp:4957
#: src/slic3r/GUI/Tab.cpp:5022 src/libslic3r/PrintConfig.cpp:3854
#: src/libslic3r/PrintConfig.cpp:3861 src/libslic3r/PrintConfig.cpp:3875
#: src/libslic3r/PrintConfig.cpp:3886 src/libslic3r/PrintConfig.cpp:3896
#: src/libslic3r/PrintConfig.cpp:3918 src/libslic3r/PrintConfig.cpp:3929
#: src/libslic3r/PrintConfig.cpp:3936 src/libslic3r/PrintConfig.cpp:3943
#: src/libslic3r/PrintConfig.cpp:3954 src/libslic3r/PrintConfig.cpp:3963
#: src/libslic3r/PrintConfig.cpp:3972
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4974
#: src/slic3r/GUI/Tab.cpp:4975 src/libslic3r/SLA/Hollowing.cpp:86
#: src/libslic3r/SLA/Hollowing.cpp:91 src/libslic3r/SLA/Hollowing.cpp:106
#: src/libslic3r/SLA/Hollowing.cpp:115 src/libslic3r/PrintConfig.cpp:3982
#: src/libslic3r/PrintConfig.cpp:3989 src/libslic3r/PrintConfig.cpp:3999
#: src/libslic3r/PrintConfig.cpp:4008
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:159
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Add negative volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:161
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:162
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:169
msgid "Add text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:170
msgid "Add negative text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:171
msgid "Add text modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:307
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:414 src/slic3r/GUI/GUI_Factories.cpp:419
#: src/slic3r/GUI/GUI_Factories.cpp:625 src/slic3r/GUI/GUI_Factories.cpp:631
#, possible-c-format, possible-boost-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:460
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:475
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:481 src/slic3r/GUI/GUI_Factories.cpp:566
#: src/slic3r/GUI/GUI_Factories.cpp:570
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:493
msgid "Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:529 src/slic3r/GUI/GUI_Factories.cpp:549
#: src/slic3r/GUI/GUI_ObjectList.cpp:660
msgid "Text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:555 src/slic3r/GUI/GUI_Factories.cpp:558
#: src/slic3r/GUI/GUI_Factories.cpp:595
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:604
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:695
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:727
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:755 src/slic3r/GUI/GUI_ObjectList.cpp:2072
#: src/slic3r/GUI/GUI_ObjectList.cpp:2584
msgid "Invalidate cut info"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:770
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:780
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:799
msgid "Export as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:810
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:817 src/slic3r/GUI/Plater.cpp:3600
msgid "Replace with STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:817
msgid "Replace the selected volume with new STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:824
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:862 src/slic3r/Utils/Repetier.cpp:145
#: src/slic3r/Utils/Repetier.cpp:226 src/libslic3r/PrintConfig.cpp:677
#: src/libslic3r/PrintConfig.cpp:2737 src/libslic3r/PrintConfig.cpp:3821
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:879
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:879
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:921 src/slic3r/GUI/Plater.cpp:6384
msgid "Convert from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:922 src/slic3r/GUI/Plater.cpp:6385
msgid "Revert conversion from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:923 src/slic3r/GUI/Plater.cpp:6386
msgid "Convert from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:924 src/slic3r/GUI/Plater.cpp:6386
msgid "Revert conversion from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:945 src/slic3r/GUI/GUI_ObjectList.cpp:2292
#: src/libslic3r/PrintConfig.cpp:4657
msgid "Merge"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:945
msgid "Merge objects to the one multipart object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:964
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:964
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:966
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:966
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:968
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:968
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:971
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:971
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:977
msgid "Edit text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:999
msgid "Ability to change text, font, size, ..."
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1021 src/slic3r/GUI/GUI_ObjectList.cpp:1793
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1059
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1059
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1062
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1062 src/slic3r/GUI/GUI_Factories.cpp:1097
msgid "Split the selected object into individual parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1066 src/slic3r/GUI/GUI_Factories.cpp:1097
#: src/libslic3r/PrintConfig.cpp:4686
msgid "Split"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1066
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1225 src/slic3r/GUI/GUI_Factories.cpp:1243
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1225
msgid "Change the number of instances of the selected objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1237
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1240
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1243
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1247
msgid "Fill bed with instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1247
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:323
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:342 src/slic3r/GUI/GUI_ObjectList.cpp:513
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:423
msgid "Wrong volume index "
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:433
msgid "No errors detected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:442
#, possible-c-format, possible-boost-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:448
#, possible-c-format, possible-boost-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:450
#, possible-c-format, possible-boost-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:452
#, possible-c-format, possible-boost-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:454
#, possible-c-format, possible-boost-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:456
#, possible-c-format, possible-boost-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:459 src/slic3r/GUI/GUI_ObjectList.cpp:462
#, possible-c-format, possible-boost-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:461
msgid "Remaining errors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:469
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:515
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:517
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:521
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:523
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:649
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:669
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:669
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1307
#: src/slic3r/GUI/GUI_ObjectList.cpp:4591
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1313
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1313
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1363
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1364
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1365
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1404
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1405
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1406
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1486
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1486
msgid "Load Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1582 src/slic3r/GUI/Plater.cpp:2452
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1617 src/slic3r/GUI/Plater.cpp:2493
msgid "Loading file"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1625
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1721
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1761
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1828
msgid "Add Shape from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1828
msgid "Add Shapes from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1947
msgid "Remove paint-on supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1954
msgid "Remove paint-on seam"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1968
msgid "Remove Multi Material painting"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1974
msgid "Shift objects to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1980
msgid "Remove variable layer height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2001
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2025
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2041
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2059
msgid "Delete connector from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2060
msgid "Delete solid part from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2061
msgid "Delete negative volume from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2063
msgid ""
"To save cut information you can delete all connectors from all related "
"objects."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2066
msgid ""
"This action will break a cut information.\n"
"After that PrusaSlicer can't guarantee model consistency.\n"
"\n"
"To manipulate with solid parts or negative volumes you have to invalidate "
"cut infornation first."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2074
#: src/slic3r/GUI/GUI_ObjectList.cpp:2614
msgid "Delete all connectors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2105
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2114
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2140
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2144
msgid "Instance cannot be deleted from cut object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2148
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2172
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2176
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2179 src/slic3r/GUI/Plater.cpp:3131
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"splitting the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2299
msgid "Merged"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2394
msgid "Merge all parts to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2426
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2697
msgid "Cut Connectors information"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2707
#: src/slic3r/GUI/GUI_ObjectList.cpp:2770
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2716
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1465
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2804
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2808
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2813
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2819
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2827
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2835
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2835
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3365
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3443
#: src/slic3r/GUI/GUI_ObjectList.cpp:3471
#: src/slic3r/GUI/GUI_ObjectList.cpp:3491
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3537
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3541
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3546
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3605
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3991
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4003
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4140
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4141
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4143
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4144
#, possible-c-format, possible-boost-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4145
#, possible-c-format, possible-boost-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4148
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4153
#: src/slic3r/GUI/GUI_ObjectList.cpp:4228 src/slic3r/GUI/Plater.cpp:196
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4333
msgid "Negative Volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4345
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4345
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4355
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4361
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4621
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4621
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4683
msgid "Repairing model"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4693
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"repairing the mesh."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4713
msgid "Fix through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4716
msgid "Fixing through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4746
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4752
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4757
msgid "Repairing was canceled"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4871
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4992
msgid "Set Printable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4992
msgid "Set Unprintable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4994
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4994
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4995
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4995
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:61
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:96
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1125
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:97
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:67
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:157 src/libslic3r/GCode.cpp:489
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:221
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:703
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:222
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:704
#: src/slic3r/GUI/Mouse3DController.cpp:478
#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:239
msgid "Size [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275
msgid "Mirror along"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275
#, possible-c-format, possible-boost-format
msgid " %c "
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:275
msgid "axis"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:279
#, possible-c-format, possible-boost-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:329
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:374
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:387
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:393
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:401
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:428
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:445
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:475
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:509
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:512
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:532
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:539
msgid "Reset skew"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546
msgid "Inches"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:705
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:733
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:745
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:786
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:794
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:804
msgid "Rotate (relative)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:744
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:793
msgid "Translate (relative) [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:822
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:898
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:973
msgid "Left handed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1126
msgid "Object coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1127
msgid "Part coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1169
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1213
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1344
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1361
msgid "Set Size"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1420
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1423
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:63
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:99
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:105
#, possible-c-format, possible-boost-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
#, possible-c-format, possible-boost-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:581
msgid "NOTE:"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:582
#, possible-boost-format
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:583
msgid "Apply color change automatically"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:773
#: src/slic3r/GUI/HintNotification.cpp:799
#: src/slic3r/GUI/NotificationManager.cpp:457
#: src/slic3r/GUI/NotificationManager.cpp:474
msgid "More"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:914
msgid "Open Preferences."
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:1006
msgid "Open Documentation in web browser."
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:666
msgid "Edit"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1166 src/slic3r/GUI/Search.cpp:531
msgid "Use for search"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1167 src/slic3r/GUI/Search.cpp:524
msgid "Category"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:1169 src/slic3r/GUI/Search.cpp:526
msgid "Search in English"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:168
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:205
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:225
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:265
#, possible-c-format, possible-boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:108
msgid "Filling bed"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:140
msgid "Bed filling canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:141
msgid "Bed filling done."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:148 src/slic3r/GUI/Jobs/EmbossJob.cpp:596
msgid "Can't create empty volume."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:201
msgid "Can't create empty object."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:208
msgid "Add Emboss text object"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:247
msgid "Created text volume is empty. Change text or font."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:465
msgid ""
"It is used default volume for embossed text, try to change text or font to "
"fix it."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:549
#, possible-boost-format
msgid "Text: %1%"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:593
msgid "Bad object to create volume."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:598
msgid "Add Emboss text Volume"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:698
msgid "Font doesn't have any shape for given text."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:738
msgid "There is no volume in projection direction."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:787
msgid "There is no valid surface for text projection."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:823
msgid "Issue during embossing the text."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:22
msgid "Best surface quality"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24
msgid "Optimize object rotation for best surface quality."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:25
msgid "Reduced overhang slopes"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:27
msgid ""
"Optimize object rotation to have minimum amount of overhangs needing support "
"structures.\n"
"Note that this method will try to find the best surface of the object for "
"touching the print bed if no elevation is set."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31
msgid "Lowest Z height"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:33
msgid "Rotate the model to have the lowest z height for faster print time."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:53
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:83
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:84
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
msgid "Importing SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:77
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81
msgid "Import is unavailable for this archive format."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:86
msgid "Importing canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:87
msgid "Importing done."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:108
msgid "The file does not exist."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:148 src/slic3r/GUI/Plater.cpp:2534
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:150 src/slic3r/GUI/Plater.cpp:2536
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:166
msgid "The profile in the imported archive is corrupt and will not be loaded."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:178
msgid ""
"No object could be retrieved from the archive. The slices might be corrupted "
"or missing."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1184
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
msgid "New project, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
msgid "Open project AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:88
msgid "Save project (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
msgid "Save project as (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:90
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Import Config from ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:96 src/slic3r/GUI/Plater.cpp:947
#: src/slic3r/GUI/Plater.cpp:7331 src/libslic3r/PrintConfig.cpp:4543
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:97 src/slic3r/GUI/Plater.cpp:7332
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
msgid "Export config"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99 src/slic3r/GUI/Plater.cpp:930
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Eject SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
msgid "Select all objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Deselect all"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
msgid "Reload plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
#: src/slic3r/GUI/PrintHostDialogs.cpp:266
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124 src/slic3r/GUI/MainFrame.cpp:77
msgid "Open new instance"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Preferences.cpp:57
#: src/slic3r/GUI/Preferences.cpp:165 src/slic3r/GUI/Preferences.cpp:188
#: src/slic3r/GUI/Preferences.cpp:207 src/slic3r/GUI/Preferences.cpp:215
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
msgid "Commands"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Press to activate selection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Press to activate deselection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Move selection 10 mm in positive Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Move selection 10 mm in negative Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Move selection 10 mm in negative X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Move selection 10 mm in positive X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Any arrow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Movement step set to 1 mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Movement in camera space"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Page Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Rotate selection 45 degrees CCW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Page Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Rotate selection 45 degrees CW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Gizmo SLA hollow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Gizmo FDM paint-on supports"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Gizmo FDM paint-on seam"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Gizmo Multi Material painting"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Gizmo Text emboss / engrave"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Unselect gizmo or clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Switch between Editor/Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Collapse/Expand the sidebar"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Minimize application"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187 src/slic3r/GUI/MainFrame.cpp:329
#: src/slic3r/GUI/MainFrame.cpp:378 src/slic3r/GUI/MainFrame.cpp:490
#: src/slic3r/GUI/MainFrame.cpp:493 src/slic3r/GUI/MainFrame.cpp:515
#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
msgid "Gizmo move: Press to snap by 1mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
msgid "Gizmo scale: Press to snap by 5%"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Gizmos"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Set selected items as Printable/Unprintable"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
msgid "Set default extruder for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
msgid "Set extruder number for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
msgid "Objects List"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1607
msgid "Open a G-code file"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1439
#: src/slic3r/GUI/MainFrame.cpp:1443 src/slic3r/GUI/MainFrame.cpp:1612
#: src/slic3r/GUI/MainFrame.cpp:1616
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Vertical slider - Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
msgid "Vertical slider - Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
msgid "Horizontal slider - Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
msgid "Horizontal slider - Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
msgid "On/Off one layer mode of the vertical slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
msgid "Show/Hide legend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Show/Hide G-code window"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236 src/slic3r/GUI/Plater.cpp:4724
#: src/slic3r/GUI/Tab.cpp:2732
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
msgid "Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
msgid "Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
msgid "Set upper thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
msgid "Set lower thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
#: src/slic3r/GUI/KBShortcutsDialog.cpp:257
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Vertical Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Set left thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Set right thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid "Horizontal Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:284
msgid "Keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:91
#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Open a new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:93
msgid "G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1384
msgid "Open G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1623
msgid "Open PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:93
msgid "Open new G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:227
msgid "Closing PrusaSlicer. Current project is modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "PrusaSlicer is closing"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "Closing PrusaSlicer while some presets are modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:330 src/slic3r/GUI/MainFrame.cpp:380
#: src/slic3r/GUI/Tab.hpp:413 src/slic3r/GUI/Tab.hpp:539
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:384
#: src/slic3r/GUI/MainFrame.cpp:2192 src/slic3r/GUI/MainFrame.cpp:2193
#: src/slic3r/GUI/Tab.hpp:520
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:382
#: src/slic3r/GUI/MainFrame.cpp:2192 src/slic3r/GUI/MainFrame.cpp:2193
#: src/slic3r/GUI/Tab.hpp:448
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:332 src/slic3r/GUI/MainFrame.cpp:386
#: src/slic3r/GUI/Tab.hpp:488
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:685 src/slic3r/GUI/Plater.cpp:1727
#: src/slic3r/GUI/Plater.cpp:2877
msgid "Untitled"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:710
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1150
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1150
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1152
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1152
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1158
#, possible-c-format, possible-boost-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1159
#, possible-c-format, possible-boost-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1167
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1167
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1169
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1169
#, possible-c-format, possible-boost-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
#, possible-c-format, possible-boost-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1177
msgid "Show Tip of the Day"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1181
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1184
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1198
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1198
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1202 src/libslic3r/PrintConfig.cpp:2952
#: src/libslic3r/PrintConfig.cpp:2961
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1202
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1205 src/libslic3r/PrintConfig.cpp:465
#: src/libslic3r/PrintConfig.cpp:474
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1205
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1209 src/libslic3r/PrintConfig.cpp:2247
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1209
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1213
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1213
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1229
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1229
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1234
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1246
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Import STL/3MF/STEP/OBJ/AM&F"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Import STL (Imperial Units)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Load an model saved with imperial units"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Import SLA Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Load an SLA archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1297
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1297
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1300
msgid "Import Config from &Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1300
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1307
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1310 src/slic3r/GUI/MainFrame.cpp:1672
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1310
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1314 src/slic3r/GUI/MainFrame.cpp:1673
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1314
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1318
msgid "Export G-code to SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1318
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export Plate as &STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export current plate as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1325
msgid "Export Plate as STL/OBJ &Including Supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1325
msgid "Export current plate as STL/OBJ including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1333 src/slic3r/GUI/MainFrame.cpp:1620
msgid "Export &Toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1333 src/slic3r/GUI/MainFrame.cpp:1620
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1337
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1337
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1340
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1340
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1343
msgid "Export Config Bundle With Physical Printers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1343
msgid "Export all presets including physical printers to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1346
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid "Ejec&t SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1356
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1356
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1362
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1362
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1368
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1368
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1376
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1376
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "&G-code Preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "E&xit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1388 src/slic3r/GUI/UpdateDialogs.cpp:376
#: src/slic3r/GUI/UpdateDialogs.cpp:423
#, possible-c-format, possible-boost-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1390 src/slic3r/GUI/MainFrame.cpp:1627
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1390 src/slic3r/GUI/MainFrame.cpp:1627
#, possible-c-format, possible-boost-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1406
msgid "&Select All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1407
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1409
msgid "D&eselect All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1410
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1413
msgid "&Delete Selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1414
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1416
msgid "Delete &All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1417
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1421
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1424
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1429
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1430
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1432
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1433
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1438 src/slic3r/GUI/MainFrame.cpp:1442
#: src/slic3r/GUI/MainFrame.cpp:1611 src/slic3r/GUI/MainFrame.cpp:1615
msgid "Re&load from Disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1448
msgid "Searc&h"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1449
msgid "Search in settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1457
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1457
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1462
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1462
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1465 src/slic3r/GUI/MainFrame.cpp:1675
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1465
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1469
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1469
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1475
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1475
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1478
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1478
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1484
msgid "Open the dialog to modify shape gallery"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1495
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1495
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Open New Instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1503
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1727
msgid "Compare Presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1503
msgid "Compare presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1513
msgid "Show &Labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1513
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1516
msgid "Show Legen&d"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1516
msgid "Show legend in preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1519
msgid "&Collapse Sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1519 src/slic3r/GUI/Plater.cpp:2346
msgid "Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1524
msgid "&Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1524
msgid "Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1539 src/slic3r/GUI/MainFrame.cpp:1646
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1540
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1541
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1542 src/slic3r/GUI/MainFrame.cpp:1647
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1545 src/slic3r/GUI/MainFrame.cpp:1650
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1607
msgid "&Open G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1623
msgid "Open &PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1637
msgid "Show legen&d"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1637
msgid "Show legend"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1672
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1673
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1675
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1699
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1711
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1718
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1718
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1719
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1754
#, possible-c-format, possible-boost-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1754
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1754
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1766
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1775 src/slic3r/GUI/Plater.cpp:3357
#: src/slic3r/GUI/Plater.cpp:6825 src/slic3r/GUI/Tab.cpp:1636
#: src/slic3r/GUI/Tab.cpp:4982
msgid "Slicing"
msgstr ""

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:1777
#, possible-c-format, possible-boost-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1800
#, possible-boost-format
msgid "%1% was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1803
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1819
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1829
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1840
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1840 src/libslic3r/PrintConfig.cpp:4662
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1854
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1871
msgid "Loading of a configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1873 src/slic3r/GUI/MainFrame.cpp:1940
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1904
msgid "Exporting configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1905
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1914
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1937
msgid "Loading of a configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1967
#, possible-c-format, possible-boost-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:453
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:464
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:472
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:484
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:490
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:505
msgid "Options:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Swap Y/Z axes"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:227
#, possible-c-format, possible-boost-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:228
#, possible-c-format, possible-boost-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:247
#, possible-c-format, possible-boost-format
msgid "%s warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:248
#, possible-c-format, possible-boost-format
msgid "%s has a warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:261 src/slic3r/GUI/MsgDialog.cpp:274
#, possible-c-format, possible-boost-format
msgid "%s info"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:302
#, possible-c-format, possible-boost-format
msgid "%s information"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:899
msgid "3D Mouse disconnected."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:900
msgid "Configuration update is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:900
msgid "See more."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:908
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:911
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:913
msgid "Desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:915
msgid "Desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:917
msgid "Undo desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:919
msgid "Undo desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:920
msgid "Exporting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:924
msgid ""
"PrusaSlicer recieved a download request from Printables.com, but it's not "
"allowed. You can allow it"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:925
msgid "here."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:773
msgid "Open Folder."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:811
msgid "Eject drive"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1054
#: src/slic3r/GUI/NotificationManager.cpp:1267
#: src/slic3r/GUI/NotificationManager.cpp:1472
msgid "ERROR"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1269
#: src/slic3r/GUI/NotificationManager.cpp:1377
msgid "COMPLETED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1467
msgid "RESOLVING ADDRESS"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1477
msgid "CANCELED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1539
msgid "Cancel upload"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1648
#, possible-c-format, possible-boost-format
msgid "%1$d object was loaded with custom supports."
msgid_plural "%1$d objects were loaded with custom supports."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1649
#, possible-c-format, possible-boost-format
msgid "%1$d object was loaded with custom seam."
msgid_plural "%1$d objects were loaded with custom seam."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1650
#, possible-c-format, possible-boost-format
msgid "%1$d object was loaded with multimaterial painting."
msgid_plural "%1$d objects were loaded with multimaterial painting."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1651
#, possible-c-format, possible-boost-format
msgid "%1$d object was loaded with variable layer height."
msgid_plural "%1$d objects were loaded with variable layer height."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1652
#, possible-c-format, possible-boost-format
msgid "%1$d object was loaded with partial sinking."
msgid_plural "%1$d objects were loaded with partial sinking."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1653
#, possible-c-format, possible-boost-format
msgid "%1$d object was loaded as a part of cut object."
msgid_plural "%1$d objects were loaded as parts of cut object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Slicing finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export G-Code."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2101
#: src/slic3r/GUI/NotificationManager.cpp:2108
#: src/slic3r/GUI/NotificationManager.cpp:2124
#: src/slic3r/GUI/NotificationManager.cpp:2130
#: src/slic3r/GUI/NotificationManager.cpp:2201
msgid "ERROR:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2113
#: src/slic3r/GUI/NotificationManager.cpp:2140
#: src/slic3r/GUI/NotificationManager.cpp:2148
#: src/slic3r/GUI/NotificationManager.cpp:2159 src/slic3r/GUI/Plater.cpp:3218
msgid "WARNING:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:2275
msgid "Exporting finished."
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:67
msgid "Paint-on seam"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:68
msgid "Cut connectors"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:70
msgid "Sinking"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:110
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:114
#: src/slic3r/GUI/ObjectDataViewModel.cpp:275
#, possible-c-format, possible-boost-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:121 src/slic3r/GUI/Tab.cpp:4801
#: src/slic3r/GUI/Tab.cpp:4938
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:376
#, possible-c-format, possible-boost-format
msgid ""
"PrusaSlicer requires OpenGL ES 2.0 capable graphics driver to run "
"correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:379
#, possible-c-format, possible-boost-format
msgid ""
"PrusaSlicer requires OpenGL %s capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:382
#, possible-c-format, possible-boost-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:386
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:389
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:391
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:399
#, possible-c-format, possible-boost-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:400
msgid "Error loading shaders"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:374
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:374
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
msgid "Delete this preset from this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:84
msgid "This printer will be shown in the presets list as"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
msgid "Type here the name of your printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Descriptive name for the printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
msgid "Add preset for this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2235
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271
msgid "Connection to printers connected via the print host failed."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:313
msgid "Test"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:318
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:340
msgid "Refresh Printers"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:377
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:378
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:407
#: src/libslic3r/PrintConfig.cpp:343
msgid "HTTPS CA File"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:408
#, possible-c-format, possible-boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:409
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:705
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:709
msgid "You have to enter a printer name."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:717
#, possible-boost-format
msgid "Printer with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:718
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:745
#, possible-boost-format
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:795
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:157
msgid "The provided name is not valid;"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:158 src/slic3r/GUI/SavePresetDialog.cpp:166
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:222
msgid ""
"For a multipart object, this value isn't accurate.\n"
"It doesn't take account of intersections and negative volumes."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:226
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:228
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:285
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:305 src/slic3r/GUI/Plater.cpp:1413
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:306 src/slic3r/GUI/Plater.cpp:1394
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:307 src/slic3r/GUI/Plater.cpp:1406
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:308
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:309
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:310 src/slic3r/GUI/Plater.cpp:1376
#: src/slic3r/GUI/Plater.cpp:1463
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:311
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:436
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:439 src/libslic3r/PrintConfig.cpp:2567
#: src/libslic3r/PrintConfig.cpp:3371
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:440
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:441
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:474 src/slic3r/GUI/Tab.cpp:1490
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:476
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:484
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:591
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:594
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:595
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:928 src/slic3r/GUI/Plater.cpp:7332
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:948 src/slic3r/GUI/Plater.cpp:3357
#: src/slic3r/GUI/Plater.cpp:6828
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1126
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1323
#, possible-boost-format
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1351
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1354
msgid "object"
msgid_plural "objects"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1354
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1394
msgid "Used Filament (in)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1396 src/slic3r/GUI/Plater.cpp:1449
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1396 src/slic3r/GUI/Plater.cpp:1449
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1406
msgid "Used Filament (in³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1432
#, possible-boost-format
msgid "Filament at extruder %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1438
msgid "(including spool)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1447 src/libslic3r/PrintConfig.cpp:1108
#: src/libslic3r/PrintConfig.cpp:3686 src/libslic3r/PrintConfig.cpp:3687
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1465
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1472
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1733
#, possible-boost-format
msgid "Do you want to save the changes to \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1734 src/slic3r/GUI/UnsavedChangesDialog.cpp:905
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1599
msgid "Save"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1734 src/slic3r/GUI/UnsavedChangesDialog.cpp:899
msgid "Discard"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1739 src/slic3r/GUI/Preferences.cpp:354
msgid "Ask for unsaved changes in project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1742
msgid ""
"You will not be asked about it again, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2213
#, possible-c-format, possible-boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2219
#, possible-c-format, possible-boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2238 src/slic3r/GUI/Plater.cpp:5395
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2345
msgid "Expand sidebar"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2427
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2582
#, possible-boost-format
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2602
#, possible-c-format, possible-boost-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2606
msgid "The size of the object is zero"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2619
#, possible-c-format, possible-boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2623 src/slic3r/GUI/Plater.cpp:2645
msgid "The object is too small"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2624 src/slic3r/GUI/Plater.cpp:2646
msgid "Apply to all the remaining small objects being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2641
#, possible-c-format, possible-boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2658
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2661 src/slic3r/GUI/Plater.cpp:2709
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2668
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2669
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2706
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2825
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2826
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2906
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2913
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2919
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2925
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3028
msgid "Delete object which is a part of cut object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3029
msgid ""
"You try to delete an object which is a part of a cut object.\n"
"This action will break a cut correspondence.\n"
"After that PrusaSlicer can't guarantee model consistency"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3033
msgid "Delete object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3038
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3055
msgid "Delete All Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3084
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3139
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3146
msgid "All non-solid parts (modifiers) were deleted"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3148
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3200
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3202
msgid "Enable supports for enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3337 src/slic3r/GUI/Plater.cpp:4400
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3408
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3494
msgid "Replace from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3512
msgid "Unable to replace with more than one volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3512 src/slic3r/GUI/Plater.cpp:3595
msgid "Error during replace"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3587
msgid "Select the new file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3595
msgid "File for the replace wasn't selected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3750
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3781 src/slic3r/GUI/Plater.cpp:5540
#: src/slic3r/GUI/Plater.cpp:5550
msgid "The selected file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3782
msgid "differs from the original file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3782
msgid "Do you want to replace it"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3807 src/slic3r/GUI/Plater.cpp:3813
msgid "Reload from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4026
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4031
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4049
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4353
msgid "There are active warnings concerning sliced models:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4364
msgid "generated warnings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4716
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5176
msgid "Undo / Redo is processing"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5178
#, possible-boost-format
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5380
msgid "Creating a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5383
msgid "Creating a new project while some presets are modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5384
msgid "You can keep presets modifications to the new project or discard them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5385
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved then new project wouldn't keep them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5390
msgid "Creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5424
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5454
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5458
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5476
msgid "Import SLA archive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5540 src/slic3r/GUI/Plater.cpp:5550
msgid "does not contain valid gcode."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5541 src/slic3r/GUI/Plater.cpp:5551
msgid "Error while loading .gcode file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5618
#, possible-c-format, possible-boost-format
msgid "%s - Multiple projects file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5628
msgid "There are several files being loaded, including Project files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5628 src/slic3r/GUI/Plater.cpp:5631
msgid "Select an action to apply to all files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5631
msgid "There are several files being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5633 src/slic3r/GUI/Plater.cpp:6027
msgid "Action"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5654
msgid "Import geometry"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5667 src/slic3r/GUI/Plater.cpp:6019
msgid "Start new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5681
msgid "Select one to load as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5692
msgid "Select one to load config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5794
#, possible-boost-format
msgid "Failed to unzip file to %1%: %2% "
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5803
#, possible-boost-format
msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6006
#, possible-c-format, possible-boost-format
msgid "%s - Load project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6015
msgid "Open as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6016
msgid "Import geometry only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6017
msgid "Import config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6022
msgid "Select an action to apply to the file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6043
msgid "Don't show again"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6084
msgid "You can open only one .gcode file at a time."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6085
msgid "Drag and drop G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6177
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6182
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6232
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6243
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6252
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6287
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6338
msgid "Enter the number of copies:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6339
msgid "Copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6342
#, possible-c-format, possible-boost-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6358
msgid "Fill bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6494
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6494
msgid "Save SL1 / SL1S file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6507
msgid "The provided file name is not valid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6508
msgid "The following characters are not allowed by a FAT file system:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6702
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6702
msgid "Save project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6936
msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6936 src/slic3r/GUI/PrintHostDialogs.cpp:131
msgid "Upload and Print"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:7331
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:7476
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:240 src/slic3r/GUI/Tab.cpp:2270
#: src/slic3r/GUI/Tab.cpp:2501 src/slic3r/GUI/Tab.cpp:2613
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1302
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1854
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:258
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:259
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:263
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:264
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:268
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:269
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:274
msgid "Alert when supports needed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:275
msgid ""
"If this is enabled, Slic3r will raise alerts when it detects issues in the "
"sliced object, that can be resolved with supports (and brim). Examples of "
"such issues are floating object parts, unsupported extrusions and low bed "
"adhesion."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:285
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:286
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:293
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:298
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:307
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:312
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:313
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:317
msgid "Suppress \" Template \" filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:318
msgid ""
"Suppress \" Template \" filament presets in configuration wizard and sidebar "
"visibility."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:322
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:323
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:331
msgid "Show load project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:332
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application or open it from a browser, shows a dialog asking to select the "
"action to take on the file to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:335
msgid "Show drop project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:336
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application, shows a dialog asking to select the action to take on the file "
"to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:342 src/slic3r/GUI/Preferences.cpp:346
msgid "Allow just a single PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:343
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:347
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:355
msgid ""
"Always ask for unsaved changes in project, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:363
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:925
msgid ""
"Ask to save unsaved changes in presets when closing the application or when "
"loading a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:364
msgid ""
"Always ask for unsaved changes in presets, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:370
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:924
msgid "Ask for unsaved changes in presets when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:371
msgid ""
"Always ask for unsaved changes in presets when selecting new preset or "
"resetting a preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:375
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:923
msgid "Ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:376
msgid "Always ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:382
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:383
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:390
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:391
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:400 src/slic3r/GUI/Preferences.cpp:401
msgid "Show splash screen"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:406
msgid "If enabled, PrusaSlicer will be open at the position it was closed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:411
msgid "Clear Undo / Redo stack on new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:412
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:417
msgid "Enable support for legacy 3DConnexion devices"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:418
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:425
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:435
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:436
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:440
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:441
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:445
msgid "Reverse direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:446
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:452
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:492
msgid "Sequential slider applied only to top layer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:493
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer.If disabled, changes made using the sequential slider, in "
"preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:499
msgid "Show sidebar collapse/expand button"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:500
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:511
msgid "Use colors for axes values in Manipulation panel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:512
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:517
msgid "Order object volumes by types"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:518
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:523
msgid "Show non-manifold edges"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:524
msgid "If enabled, shows non-manifold edges."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:528
msgid "Allow automatically color change"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:529
msgid ""
"If enabled, related notification will be shown, when sliced object looks "
"like a logo or a sign."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:534
msgid "Set settings tabs as menu items (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:535
msgid ""
"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
"will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:542
msgid "Show \"Tip of the day\" notification after start"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:543
msgid "If enabled, useful hints are displayed at startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:547
msgid "Notify about new releases"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:548
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:551
msgid "Release only"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:558
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:559
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:577 src/slic3r/GUI/Tab.cpp:1667
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:594
msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:600
msgid "Allow downloads from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:601
msgid "If enabled, PrusaSlicer will be allowed to download from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:610
msgid "Render"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:620
msgid "Use environment map"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:621
msgid "If enabled, renders object using the environment map."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:629
msgid "Dark mode (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:639
msgid "Enable dark mode"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:640
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:647
msgid "Use system menu for application"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:648
msgid ""
"If enabled, application will use the standard Windows system menu,\n"
"but on some combination od display scales it can look ugly. If disabled, old "
"UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:726
msgid "Changes for the critical options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:728
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:921
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:936
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:972
msgid "Layout Options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:981
msgid "Old regular layout with the tab bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:982
msgid "New layout, access via settings button in the top menu"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:983
msgid "Settings in non-modal window"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1025
msgid "Text colors"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1049
msgid "Mode markers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:254
#: src/slic3r/GUI/PresetComboBoxes.cpp:306
#: src/slic3r/GUI/PresetComboBoxes.cpp:846
#: src/slic3r/GUI/PresetComboBoxes.cpp:909
#: src/slic3r/GUI/PresetComboBoxes.cpp:1073
#: src/slic3r/GUI/PresetComboBoxes.cpp:1125
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:310
#: src/slic3r/GUI/PresetComboBoxes.cpp:915
#: src/slic3r/GUI/PresetComboBoxes.cpp:1130
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:321
msgid "Incompatible presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:364
#, possible-boost-format
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:366
msgid "Delete Physical Printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:612
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:740
#: src/slic3r/GUI/PresetComboBoxes.cpp:788
msgid "Add/Remove presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:745
#: src/slic3r/GUI/PresetComboBoxes.cpp:793 src/slic3r/GUI/Tab.cpp:3308
msgid "Add physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:759
msgid "Edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:765
msgid "Change extruder color"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:773 src/slic3r/GUI/Tab.cpp:3308
msgid "Edit physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:779
msgid "Open physical printer URL"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:784
msgid "Delete physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:924
#: src/slic3r/GUI/PresetComboBoxes.cpp:1142
msgid "Template presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:935
#: src/slic3r/GUI/PresetComboBoxes.cpp:1156
msgid "Physical printers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:959
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:961
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:963
#: src/slic3r/GUI/PresetComboBoxes.cpp:1180
msgid "Add/Remove printers"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:32
#, possible-boost-format
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:40
#, possible-boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:44
#, possible-boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
#, possible-boost-format
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, possible-boost-format
msgid "During the other layers, fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, possible-boost-format
msgid "Fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:59
#, possible-boost-format
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:61
msgid "except for the first layer."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "During the other layers, fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "Fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:170
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:178
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:197
#, possible-c-format, possible-boost-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:215
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:221
#, possible-c-format, possible-boost-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:236
#, possible-c-format, possible-boost-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:240
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:282
#, possible-boost-format
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:285
#, possible-boost-format
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:288
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:301
#, possible-boost-format
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:304
#, possible-boost-format
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:307
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:54
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:63
msgid "Group"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:73
msgid "Upload to storage:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:82
msgid "Upload to storage: "
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:104
#, possible-c-format, possible-boost-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:111
msgid "Upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:121
msgid "Upload to Queue"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:142
msgid "Upload and Simulate"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:297
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:298
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:299
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:300
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:301
msgctxt "OfFile"
msgid "Size"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:302
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:303
msgid "Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:307
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:309
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:367
#: src/slic3r/GUI/PrintHostDialogs.cpp:422
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:423
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:425
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:426
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:427
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:475
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:29
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:116
#: src/libslic3r/PrintConfig.cpp:991 src/libslic3r/PrintConfig.cpp:1035
#: src/libslic3r/PrintConfig.cpp:1050 src/libslic3r/PrintConfig.cpp:3539
#: src/libslic3r/PrintConfig.cpp:3548 src/libslic3r/PrintConfig.cpp:3557
#: src/libslic3r/PrintConfig.cpp:3703 src/libslic3r/PrintConfig.cpp:3711
#: src/libslic3r/PrintConfig.cpp:3719 src/libslic3r/PrintConfig.cpp:3726
#: src/libslic3r/PrintConfig.cpp:3734 src/libslic3r/PrintConfig.cpp:3742
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:95
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:948
#: src/libslic3r/PrintConfig.cpp:1808
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:90
#, possible-c-format, possible-boost-format
msgid "Rename %s to:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:90
#, possible-c-format, possible-boost-format
msgid "Save %s as:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:165
#: src/slic3r/GUI/SavePresetDialog.cpp:173
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:174
msgid "the following suffix is not allowed:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:180
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:186
msgid "The supplied name is used for a system profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:187
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:192
msgid "The supplied name is used for a external profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:193
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:203
msgid "Save preset modifications to existing user profile"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:205
msgid "Nothing changed"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:210
#, possible-boost-format
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:212
#, possible-boost-format
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:213
msgid "Note: This preset will be replaced after saving"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:219
msgid "The name cannot be empty."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:230
msgid "The name is too long."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:235
msgid "The name cannot start with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:240
msgid "The name cannot end with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:245
msgid "The name cannot be the same as a preset alias name."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:289
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:295
msgid "Save presets"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:302
msgid "Rename preset"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:327
msgctxt "PresetName"
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:347
msgid "Save as profile derived from current printer only."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:407
#, possible-boost-format
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:446
#, possible-boost-format
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:449
#, possible-boost-format
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:450
#, possible-boost-format
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:451
#, possible-boost-format
msgid "Just switch to \"%1%\" preset"
msgstr ""

#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
#: src/slic3r/GUI/Tab.cpp:2641
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
#: src/slic3r/GUI/Tab.cpp:2635
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:180
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:221
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:253
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:272
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:290
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:309
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:406
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:431
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1312
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1685
msgid ""
"The currently manipulated object is tilted or contains tilted parts "
"(rotation angles are not multiples of 90°). Non-uniform scaling of tilted "
"objects is only possible in non-local coordinate systems, once the rotation "
"is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1688
msgid "This operation is irreversible."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:117
msgid "Data to send"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:557
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:624
msgid "Send system info"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:587
#, possible-boost-format
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:594
msgid "Is it safe?"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:596
#, possible-boost-format
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:620
msgid "Show verbatim data that will be sent"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:622
msgid "Ask me next time"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:623
msgid "Do not send anything"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:709
msgid "System info sent successfully. Thank you."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:712
msgid "Sending system info failed!"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:719
msgid "Sending system info was cancelled."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:726
msgid "Sending system info..."
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:92
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:160
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:172
msgid "Eigen vectorization supported:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:179
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:68 src/libslic3r/PrintConfig.cpp:607
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:69
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:74 src/libslic3r/PrintConfig.cpp:622
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:75
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:165
msgid "Compare this preset with some another"
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:167
#, possible-c-format, possible-boost-format
msgid "Save current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:168
#, possible-c-format, possible-boost-format
msgid "Rename current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:170
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:174
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:178
#, possible-boost-format
msgid "Search in settings [%1%]"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1243
msgid "Detach from system preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1256
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1257
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1260
msgid "Modifications to the current profile will be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1266
msgid "Detach preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1292
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1294
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1296
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1300
msgid "Current preset is inherited from"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1304
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1305
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1306
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1310
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1316
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1324
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1327
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1341
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1345
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1353
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1354
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1392 src/slic3r/GUI/Tab.cpp:4936
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1398
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1410
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1411 src/libslic3r/PrintConfig.cpp:2395
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1416
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1427
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1445
msgid "Fuzzy skin (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1468
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1483
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1505
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1510
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1529
msgid "Organic supports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1538
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1551
msgid "Dynamic overhang speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1565
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1569
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1573
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1584
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1588
msgid "Pressure equalizer (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1592
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1600
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1604
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1620
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1630
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1633
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1644
msgid "Arachne perimeter generator"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1652 src/slic3r/GUI/Tab.cpp:4986
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1653
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1655
msgid "Extruder clearance"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1660 src/slic3r/GUI/Tab.cpp:4987
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1679 src/libslic3r/PrintConfig.cpp:2019
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1691 src/slic3r/GUI/Tab.cpp:1692
#: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2082
#: src/slic3r/GUI/Tab.cpp:2482 src/slic3r/GUI/Tab.cpp:2483
#: src/slic3r/GUI/Tab.cpp:2560 src/slic3r/GUI/Tab.cpp:2561
#: src/slic3r/GUI/Tab.cpp:4178 src/slic3r/GUI/Tab.cpp:4818
#: src/slic3r/GUI/Tab.cpp:4819
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1698 src/slic3r/GUI/Tab.cpp:2089
#: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2567
#: src/slic3r/GUI/Tab.cpp:4826 src/slic3r/GUI/Tab.cpp:4992
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1699 src/slic3r/GUI/Tab.cpp:2090
#: src/slic3r/GUI/Tab.cpp:2490 src/slic3r/GUI/Tab.cpp:2568
#: src/slic3r/GUI/Tab.cpp:4827 src/slic3r/GUI/Tab.cpp:4993
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1731
msgid "Post processing scripts shall modify G-code file in place."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1810
#, possible-c-format, possible-boost-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:1815
msgid "Found reserved keywords in"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1877
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1878 src/slic3r/GUI/Tab.cpp:2823
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1959
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1963
msgid "Nozzle"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1968
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1973
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1975 src/libslic3r/PrintConfig.cpp:1915
#: src/libslic3r/PrintConfig.cpp:3029
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1986
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1987
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1997
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2003
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2010
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2020
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2023
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2036
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2060 src/slic3r/GUI/Tab.cpp:2394
#: src/slic3r/GUI/Tab.cpp:4489 src/libslic3r/GCode.cpp:682
#: src/libslic3r/PrintConfig.cpp:2479
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2061 src/slic3r/GUI/Tab.cpp:2395
#: src/libslic3r/GCode.cpp:656 src/libslic3r/PrintConfig.cpp:2429
#: src/libslic3r/PrintConfig.cpp:2444
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2071 src/slic3r/GUI/Tab.cpp:2405
#: src/libslic3r/GCode.cpp:657 src/libslic3r/PrintConfig.cpp:727
#: src/libslic3r/PrintConfig.cpp:737
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2116
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2237
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2271 src/slic3r/GUI/Tab.cpp:2502
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2280 src/slic3r/GUI/UnsavedChangesDialog.cpp:1302
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1854
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2285
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2318
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2322 src/slic3r/GUI/Tab.cpp:2710
#: src/libslic3r/PrintConfig.cpp:1884
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2415 src/libslic3r/GCode.cpp:658
#: src/libslic3r/PrintConfig.cpp:444
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2425 src/libslic3r/GCode.cpp:659
#: src/libslic3r/PrintConfig.cpp:1612
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2435 src/libslic3r/GCode.cpp:660
#: src/libslic3r/PrintConfig.cpp:2912
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2445 src/libslic3r/GCode.cpp:661
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2455 src/libslic3r/GCode.cpp:662
msgid "Color Change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2464 src/libslic3r/GCode.cpp:663
#: src/libslic3r/PrintConfig.cpp:2470
msgid "Pause Print G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2473 src/libslic3r/GCode.cpp:664
msgid "Template Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2509
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2524
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2525
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2532 src/slic3r/GUI/Tab.cpp:4808
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2545 src/slic3r/GUI/Tab.cpp:4804
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2552
msgid "Output"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2611 src/slic3r/GUI/Tab.cpp:2871
#: src/libslic3r/PrintConfig.cpp:1641 src/libslic3r/PrintConfig.cpp:1674
#: src/libslic3r/PrintConfig.cpp:1691 src/libslic3r/PrintConfig.cpp:1708
#: src/libslic3r/PrintConfig.cpp:1724 src/libslic3r/PrintConfig.cpp:1734
#: src/libslic3r/PrintConfig.cpp:1744 src/libslic3r/PrintConfig.cpp:1757
#: src/libslic3r/PrintConfig.cpp:1767
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2634
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2640
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2649
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2654
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2663
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2669
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2707
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2735
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2771
msgid "Apply below setting to other extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2816
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2820
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2826
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2839
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2896 src/slic3r/GUI/Tab.cpp:2905
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2906
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3070
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3072
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3380
msgid "New printer preset selected"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3754
msgid "Detached"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3853
msgid ""
"The physical printer below is based on the preset, you are going to rename."
msgid_plural ""
"The physical printers below are based on the preset, you are going to rename."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3858
msgid "Note, that the selected preset will be renamed in this printer too."
msgid_plural ""
"Note, that the selected preset will be renamed in these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3920
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3920
msgid "delete"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3929
msgid "It's a last preset for this physical printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3934
#, possible-boost-format
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3946
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3951
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3956
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3961
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3966
#, possible-boost-format
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3971
#, possible-boost-format
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4057 src/slic3r/GUI/Tab.cpp:4419
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4176
msgid "Find"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4177
msgid "Replace with"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4266
msgid "Regular expression"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4270
msgid "Case insensitive"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4274
msgid "Whole word"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4278
msgid "Match single line"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4381
msgid "Are you sure you want to delete all substitutions?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4517
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4520
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4524
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4546
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4548
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4550
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4552
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4557
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:4559
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4562
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:4564
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4574
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4576
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4579
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4582
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4584
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4590
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4591
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4597
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4598
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4760 src/slic3r/GUI/Tab.cpp:4762
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4847 src/slic3r/GUI/Tab.cpp:4848
msgid "Material printing profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4897
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4902
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4925
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4952
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5020
#, possible-boost-format
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5022 src/libslic3r/PrintConfig.cpp:3467
msgid "Object elevation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5022 src/libslic3r/PrintConfig.cpp:3928
msgid "Pad around object"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:147
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:156
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:165
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1107
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1122
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1137
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1152
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1197
msgid "Undef"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:792
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:810
msgid "Switching Presets: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:858
msgid "Original Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:859
msgid "Modified Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:861
msgid "New Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:892
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
msgid "Keep"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:892
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1569
msgid "Transfer"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
msgid "Don't save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:926
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"create new project"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:927
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"switch a preset"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:928
msgid ""
"You will not be asked about the unsaved changes in presets the next time "
"you: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:931
msgid "PrusaSlicer will remember your action."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:932
#, possible-boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:964
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1772
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:966
msgid "All settings changes will not be saved"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:966
msgid "All settings changes will be discarded."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
msgid "Save the selected options."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:970
msgid "Keep the selected settings."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:971
msgid "Transfer the selected settings to the newly selected preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:975
#, possible-boost-format
msgid "Save the selected options to preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:976
#, possible-boost-format
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1237
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1243
#, possible-boost-format
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1247
#, possible-boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1248
#, possible-boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1297
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1850
msgid "Extruders count"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1326
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1515
msgid "Show all presets (including incompatible)"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1533
msgid "Select presets to compare"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1545
msgid "Left Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1546
msgid "Right Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1595
msgid ""
"Transfer the selected options from left preset to the right.\n"
"Note: New modified presets will be selected in settings tabs after close "
"this dialog."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1603
msgid "Save the selected options from left preset to the right."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1621
msgid "Transfer values from left to right"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1622
msgid ""
"If enabled, this dialog can be used for transver selected values from left "
"to right preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1807
msgid "One of the presets doesn't found"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1818
msgid "Compared presets has different printer technology"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1832
msgid "Presets are the same"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1840
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1864
msgid "Undef category"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1864
msgid "Undef group"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2016
msgid "Modified"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:41
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:41
#, possible-c-format, possible-boost-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:46 src/slic3r/GUI/UpdateDialogs.cpp:101
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:48 src/slic3r/GUI/UpdateDialogs.cpp:103
#: src/slic3r/GUI/UpdateDialogs.cpp:141
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:56
msgid "Changelog & Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:63 src/slic3r/GUI/UpdateDialogs.cpp:309
#: src/slic3r/GUI/UpdateDialogs.cpp:367
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:69
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:76 src/slic3r/GUI/UpdateDialogs.cpp:109
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:98
msgid "App Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:98
#, possible-c-format, possible-boost-format
msgid ""
"New version of %s is available.\n"
"Do you wish to download it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:120
msgid "Next"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
msgid "App Update download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
#, possible-c-format, possible-boost-format
msgid "New version of %s is available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:146
msgid "Run installer after download. (Otherwise file explorer will be opened)"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
msgid "Target directory:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:158
msgid "Select directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:176
msgid "Select directory:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:193
msgid "Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:204
msgid "Directory path is empty."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:212
msgid "Directory path is incorrect."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:217
#, possible-boost-format
msgid "Directory %1% doesn't exists. Do you wish to create it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:222
msgid "Failed to create directory."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:229
#, possible-boost-format
msgid "File %1% already exists. Do you wish to overwrite it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:234
#, possible-boost-format
msgid "Download path is %1%. Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270
msgid "Opening Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270 src/slic3r/GUI/UpdateDialogs.cpp:437
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:271
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:273
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:276
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:297 src/slic3r/GUI/UpdateDialogs.cpp:357
msgid "Comment:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:318
msgid "Install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:320
msgid "Don't install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:333 src/slic3r/GUI/UpdateDialogs.cpp:388
#, possible-c-format, possible-boost-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:333
msgid "You must install a configuration update."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:336
#, possible-c-format, possible-boost-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:389
#, possible-c-format, possible-boost-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:392
#, possible-c-format, possible-boost-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:401
#, possible-c-format, possible-boost-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:406
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:422
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:441
#, possible-c-format, possible-boost-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:458
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:475
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:475 src/slic3r/GUI/UpdateDialogs.cpp:495
msgid "No updates available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:480
#, possible-c-format, possible-boost-format
msgid "%s has no configuration updates available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:495
msgid "App update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:500
#, possible-c-format, possible-boost-format
msgid "%s has no version updates available."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:23
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:56
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:116
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:118
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:122
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:124
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:175
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:301
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:302
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:310
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:311
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:354
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:363
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:364
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:378
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:444
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:672
#, possible-c-format, possible-boost-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:673
#, possible-c-format, possible-boost-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:206
#: src/slic3r/Utils/OctoPrint.cpp:255 src/slic3r/Utils/OctoPrint.cpp:667
#: src/slic3r/Utils/OctoPrint.cpp:817 src/slic3r/Utils/OctoPrint.cpp:890
#: src/slic3r/Utils/Repetier.cpp:88
#, possible-c-format, possible-boost-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:84
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:90
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:92
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:157
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:151
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:154
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:221
#: src/slic3r/Utils/FixModelByWin10.cpp:361
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:237
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:244
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:250
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:253
#: src/slic3r/Utils/FixModelByWin10.cpp:388
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:265
#: src/slic3r/Utils/FixModelByWin10.cpp:272
#: src/slic3r/Utils/FixModelByWin10.cpp:303
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:394
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:398
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:402
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:412
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:418
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:74
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:76
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:279
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:285
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:287
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:529
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:535
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:574
msgid "Connection to PrusaLink works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:580
msgid "Could not connect to PrusaLink"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:769
msgid "Storages found:"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:771
msgid "read only"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:771
msgid "no free space"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:774
#, possible-boost-format
msgid "Upload has failed. There is no suitable storage found at %1%.%2%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:64
#, possible-boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:998
#: src/slic3r/Utils/PresetUpdater.cpp:1015
msgid "Continue and install configuration updates?"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1021
msgid "Installing profiles"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1071
#, possible-boost-format
msgid "Downloading resources for %1%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1171
msgid ""
"Configuration Update will cause the preset modification to be lost.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1173
msgid "Updating"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1202
#, possible-c-format, possible-boost-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1206
#, possible-c-format, possible-boost-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1209
#, possible-c-format, possible-boost-format
msgid "requires max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1362
#, possible-boost-format
msgid "Couldn't locate idx file %1% when performing updates."
msgstr ""

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""

#: src/slic3r/Utils/Http.cpp:78
#, possible-boost-format
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""

#: src/slic3r/Utils/Http.cpp:82
#, possible-boost-format
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""

#: src/slic3r/Utils/Process.cpp:164
msgid "Open G-code file:"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:103
msgid "Connection to Repetier works correctly."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:109
msgid "Could not connect to Repetier"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:111
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:263
#, possible-boost-format
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:270
#, possible-boost-format
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:283
#, possible-boost-format
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:584
msgid "Taking a configuration snapshot failed."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:598
msgid ""
"PrusaSlicer has encountered an error while taking a configuration snapshot."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:599
msgid "PrusaSlicer error"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Continue"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Abort"
msgstr ""

#: src/libslic3r/GCode.cpp:488
msgid "There is an object with no extrusions in the first layer."
msgstr ""

#: src/libslic3r/GCode.cpp:519
#, possible-boost-format
msgid "Empty layer between %1% and %2%."
msgstr ""

#: src/libslic3r/GCode.cpp:522
msgid "(Some lines not shown)"
msgstr ""

#: src/libslic3r/GCode.cpp:524
#, possible-boost-format
msgid "Object name: %1%"
msgstr ""

#: src/libslic3r/GCode.cpp:525
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""

#: src/libslic3r/GCode.cpp:667
msgid "Filament Start G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:674
msgid "Filament End G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:715
msgid "In the custom G-code were found reserved keywords:"
msgstr ""

#: src/libslic3r/GCode.cpp:717
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr ""

#: src/libslic3r/GCode.cpp:1122 src/libslic3r/GCode.cpp:1133
msgid "No extrusions were generated for objects."
msgstr ""

#: src/libslic3r/GCode.cpp:1326
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""

#: src/libslic3r/Flow.cpp:61
#, possible-boost-format
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1900
#, possible-boost-format
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1911
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1915
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1919
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:1010
#, possible-boost-format
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/GCode/PostProcessor.cpp:289
#, possible-boost-format
msgid ""
"Post-processing script %1% failed.\n"
"\n"
"The post-processing script is expected to change the G-code file %2% in "
"place, but the G-code file was deleted and likely saved under a new name.\n"
"Please adjust the post-processing script to change the G-code in place and "
"consult the manual on how to optionally rename the post-processed G-code "
"file.\n"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Print.cpp:468
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:471
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:475
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:477
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:481
msgid ""
"Avoid crossing perimeters option and avoid crossing curled overhangs option "
"cannot be both enabled together."
msgstr ""

#: src/libslic3r/Print.cpp:490
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""

#: src/libslic3r/Print.cpp:494
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:518
msgid ""
"The print is taller than the maximum allowed height. You might want to "
"reduce the size of your model or change current print settings and retry."
msgstr ""

#: src/libslic3r/Print.cpp:535
msgid "Variable layer height is not supported with Organic supports."
msgstr ""

#: src/libslic3r/Print.cpp:548
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:554
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
"RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:556
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:558
msgid ""
"Ooze prevention is only supported with the wipe tower when "
"'single_extruder_multi_material' is off."
msgstr ""

#: src/libslic3r/Print.cpp:560
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:562
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:572
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:574
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:577
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:579
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:604
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:628
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:641
#, possible-boost-format
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:644
#, possible-boost-format
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:655
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:663
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:703
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:708
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:729
msgid ""
"Relative extruder addressing requires resetting the extruder position at "
"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
"layer_gcode."
msgstr ""

#: src/libslic3r/Print.cpp:731
msgid ""
"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
"absolute extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:733
msgid ""
"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
"extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:875
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:903
msgid "Generating skirt and brim"
msgstr ""

#: src/libslic3r/Print.cpp:951
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:955
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1164
msgid "Alert if supports needed"
msgstr ""

#: src/libslic3r/Print.cpp:1169
msgid "long bridging extrusions"
msgstr ""

#: src/libslic3r/Print.cpp:1170
msgid "floating bridge anchors"
msgstr ""

#: src/libslic3r/Print.cpp:1173
msgid "collapsing overhang"
msgstr ""

#: src/libslic3r/Print.cpp:1175
msgid "loose extrusions"
msgstr ""

#: src/libslic3r/Print.cpp:1178
msgid "low bed adhesion"
msgstr ""

#: src/libslic3r/Print.cpp:1179
msgid "floating object part"
msgstr ""

#: src/libslic3r/Print.cpp:1180
msgid "thin fragile section"
msgstr ""

#: src/libslic3r/Print.cpp:1216
msgid "Detected print stability issues"
msgstr ""

#: src/libslic3r/Print.cpp:1242
msgid "or"
msgstr ""

#: src/libslic3r/Print.cpp:1242
msgid "and"
msgstr ""

#: src/libslic3r/Print.cpp:1242
msgid "brim"
msgstr ""

#: src/libslic3r/Print.cpp:1243
msgid "Consider enabling supports"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:533
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:546
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:558
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:564
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:579
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:586
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:693
msgid "Slicing done"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:57
msgid "Assembling model from parts"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:58
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:59
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:60
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:61 src/libslic3r/SLAPrintSteps.cpp:691
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:62
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:63
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:64
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:79
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:80
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:255
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:262
msgid "Unable to drill the current configuration of holes into the model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:271
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:279
msgid "Failed to drill some holes into the model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:289
msgid ""
"Can't perform full mesh booleans! Some parts of the print will be previewed "
"with approximated meshes. This does not affect the quality of slices or the "
"physical print in any way."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:510
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:740 src/libslic3r/SLAPrintSteps.cpp:749
#: src/libslic3r/SLAPrintSteps.cpp:787
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:779
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:908
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:84
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:254 src/libslic3r/PrintConfig.cpp:255
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:260
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:265
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:270
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:275
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:277
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:285
msgid "G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:286
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
"following format: \"XxY, XxY, ...\""
msgstr ""

#: src/libslic3r/PrintConfig.cpp:292
msgid "Format of G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:293
msgid ""
"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
"QOI for low memory firmware"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:301
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:308
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:309
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:317
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:318
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:327
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:328
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:336
msgid "Name of the printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:344
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:360
msgid "Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:368
msgid "Ignore HTTPS certificate revocation checks"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:369
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:376
msgid "Printer preset names"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:377
msgid "Names of presets related to the physical printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:382
msgid "Authorization Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:385
msgid "API key"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:386
msgid "HTTP digest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:406
msgid "Avoid crossing curled overhangs (Experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:407
msgid ""
"Plan travel moves such that the extruder avoids areas where the filament may "
"be curled up. This is mostly happening on steeper rounded overhangs and may "
"cause a crash with the nozzle. This feature slows down both the print and "
"the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:414
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:415
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:422
msgid "Avoid crossing perimeters - Max detour length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:424
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:427
msgid "mm or % (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:434 src/libslic3r/PrintConfig.cpp:2874
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:435
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:438
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:445
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:455
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:456
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:467
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:468
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:476
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:478
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:484
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:485
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:487 src/libslic3r/PrintConfig.cpp:681
#: src/libslic3r/PrintConfig.cpp:1199 src/libslic3r/PrintConfig.cpp:1208
#: src/libslic3r/PrintConfig.cpp:1394 src/libslic3r/PrintConfig.cpp:1403
#: src/libslic3r/PrintConfig.cpp:1412 src/libslic3r/PrintConfig.cpp:1697
#: src/libslic3r/PrintConfig.cpp:1748 src/libslic3r/PrintConfig.cpp:1759
#: src/libslic3r/PrintConfig.cpp:1769 src/libslic3r/PrintConfig.cpp:1960
#: src/libslic3r/PrintConfig.cpp:1968
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:493
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:495
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:504
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:505
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:506 src/libslic3r/PrintConfig.cpp:550
#: src/libslic3r/PrintConfig.cpp:1149 src/libslic3r/PrintConfig.cpp:1587
#: src/libslic3r/PrintConfig.cpp:1777 src/libslic3r/PrintConfig.cpp:1840
#: src/libslic3r/PrintConfig.cpp:2092 src/libslic3r/PrintConfig.cpp:2151
#: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:3319
#: src/libslic3r/PrintConfig.cpp:3565 src/libslic3r/PrintConfig.cpp:3840
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:513
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:515
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:525
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:527
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:528 src/libslic3r/PrintConfig.cpp:956
#: src/libslic3r/PrintConfig.cpp:964 src/libslic3r/PrintConfig.cpp:973
#: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:1008
#: src/libslic3r/PrintConfig.cpp:1027 src/libslic3r/PrintConfig.cpp:1333
#: src/libslic3r/PrintConfig.cpp:1526 src/libslic3r/PrintConfig.cpp:1606
#: src/libslic3r/PrintConfig.cpp:1680 src/libslic3r/PrintConfig.cpp:1714
#: src/libslic3r/PrintConfig.cpp:1726 src/libslic3r/PrintConfig.cpp:1736
#: src/libslic3r/PrintConfig.cpp:1799 src/libslic3r/PrintConfig.cpp:1858
#: src/libslic3r/PrintConfig.cpp:1999 src/libslic3r/PrintConfig.cpp:2226
#: src/libslic3r/PrintConfig.cpp:2235 src/libslic3r/PrintConfig.cpp:2757
#: src/libslic3r/PrintConfig.cpp:2974 src/libslic3r/PrintConfig.cpp:2984
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:535
msgid "Enable dynamic overhang speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:537
msgid "This setting enables dynamic speed control on overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:542
msgid "Overhang overlap levels"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:544
msgid ""
"Controls overhang levels, expressed as a percentage of overlap of the "
"extrusion with the previous layer - 100% represents full overlap - no "
"overhang is present, while 0% represents full overhang (floating extrusion). "
"Each overhang level then corresponds with the overhang speed below. Speeds "
"for overhang levels in between are calculated via linear interpolation.If "
"you set multiple different speeds for the same overhang level, only the "
"largest speed is used. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:557
msgid "Dynamic speed on overhangs"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:559
msgid ""
"This setting controls the speed on the overhang with the overlap value set "
"above. The speed of the extrusion is calculated as a linear interpolation of "
"the speeds for higher and lower overlap. If set as percentage, the speed is "
"calculated over the external perimeter speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:563 src/libslic3r/PrintConfig.cpp:803
#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1263
#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2387
#: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2944
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:569
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:571
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:580
msgid "Brim type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:582
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:584
msgid "No brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:585
msgid "Outer brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:586
msgid "Inner brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:587
msgid "Outer and inner brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:593
msgid "Brim separation gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:595
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:602
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:603
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:613
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:614
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:628
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:629
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:646
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:647
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:655
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:656
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:661
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:662
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:669
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:670
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:678
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:687
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:688
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:694
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:695 src/libslic3r/PrintConfig.cpp:3789
#: src/libslic3r/PrintConfig.cpp:3800
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:701
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:702
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:711
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:713
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:719
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:720
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:728
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:738
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:749
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:751
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:757
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:759
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:762 src/libslic3r/PrintConfig.cpp:1175
#: src/libslic3r/PrintConfig.cpp:2723 src/libslic3r/PrintConfig.cpp:2738
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:763
msgid "Monotonic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:764
msgid "Monotonic Lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:765 src/libslic3r/PrintConfig.cpp:1176
msgid "Aligned Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:766 src/libslic3r/PrintConfig.cpp:1182
#: src/libslic3r/PrintConfig.cpp:2739
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:767 src/libslic3r/PrintConfig.cpp:1186
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:768 src/libslic3r/PrintConfig.cpp:1187
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:769 src/libslic3r/PrintConfig.cpp:1188
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:777
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:779
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:786 src/libslic3r/PrintConfig.cpp:798
#: src/libslic3r/PrintConfig.cpp:1965
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:788
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:791 src/libslic3r/PrintConfig.cpp:905
#: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:1438
#: src/libslic3r/PrintConfig.cpp:1490 src/libslic3r/PrintConfig.cpp:1517
#: src/libslic3r/PrintConfig.cpp:1988 src/libslic3r/PrintConfig.cpp:2375
#: src/libslic3r/PrintConfig.cpp:2548 src/libslic3r/PrintConfig.cpp:2633
#: src/libslic3r/PrintConfig.cpp:2930 src/libslic3r/PrintConfig.cpp:3151
#: src/libslic3r/PrintConfig.cpp:3166 src/libslic3r/PrintConfig.cpp:3200
#: src/libslic3r/PrintConfig.cpp:3212
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:800
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:810
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:812
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:818
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:820
#, possible-c-format, possible-boost-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:827
msgid "Extra perimeters on overhangs (Experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:829
msgid ""
"Detect overhang areas where bridges cannot be anchored, and fill them with "
"extra perimeter paths. These paths are anchored to the nearby non-overhang "
"area when possible."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:837
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:845
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:856
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:866
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:867 src/libslic3r/PrintConfig.cpp:930
#: src/libslic3r/PrintConfig.cpp:3636
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:873
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:874
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:883
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:884
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:889
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:890
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:899
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:901
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:913
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:914
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:919
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:920
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:922 src/libslic3r/PrintConfig.cpp:2322
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:929 src/libslic3r/PrintConfig.cpp:3635
msgid "Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:935
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:936
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:944 src/libslic3r/PrintConfig.cpp:1805
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:945
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:954
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:955
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:962
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:963
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:970
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:971
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:979
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:980
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:987
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:988
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:997
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:998
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1006
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1007
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1014
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1015
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1019
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1025
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1026
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1033
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1034
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1041
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1042
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1048
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1049
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1057
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1064 src/libslic3r/PrintConfig.cpp:3679
#: src/libslic3r/PrintConfig.cpp:3680
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1065
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1068
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1073
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1074
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1102
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1103
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1109
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1110
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1115
msgid "Spool weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1116
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1120
msgid "g"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:3784
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1133
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1135
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1146
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1148
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1171
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1173
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1177 src/libslic3r/PrintConfig.cpp:2769
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1179
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1180
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1181
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1183 src/libslic3r/PrintConfig.cpp:2725
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1184
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1185
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1189
msgid "Adaptive Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1190
msgid "Support Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1191
msgid "Lightning"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1197
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1205
msgid "First object layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1206
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1215
msgid "First layer bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1216
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1226
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1240
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1248
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1249
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1259
msgid "Speed of object first layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1260
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1270
msgid "First layer nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1271
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1279
msgid "Full fan speed at layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1280
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1292
msgid "Fuzzy skin type."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1295
msgid "Outside walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1296
msgid "All walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1302
msgid "Fuzzy skin thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1304
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1312
msgid "Fuzzy skin point distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1314
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1322
msgid "Fill gaps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1324
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1329
msgid "Gap fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1331
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1339
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1340
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1347
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1348
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1363
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1369
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1370
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1377
msgid "G-code substitutions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1378
msgid "Find / replace patterns in G-code lines and substitute them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1383
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1384
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1392
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1400 src/libslic3r/PrintConfig.cpp:2370
#: src/libslic3r/PrintConfig.cpp:2382
msgid "Solid infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1401
msgid ""
"This is the acceleration your printer will use for solid infill. Set zero to "
"use the value for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:2924
#: src/libslic3r/PrintConfig.cpp:2937
msgid "Top solid infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1410
msgid ""
"This is the acceleration your printer will use for top solid infill. Set "
"zero to use the value for solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1419
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1421
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1424
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1430
msgid "Length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1432
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1442
msgid "0 (no open anchors)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1443 src/libslic3r/PrintConfig.cpp:1466
msgid "1 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1444 src/libslic3r/PrintConfig.cpp:1467
msgid "2 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1445 src/libslic3r/PrintConfig.cpp:1468
msgid "5 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1446 src/libslic3r/PrintConfig.cpp:1469
msgid "10 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1447 src/libslic3r/PrintConfig.cpp:1470
msgid "1000 (unlimited)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1453
msgid "Maximum length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1455
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1465
msgid "0 (not anchored)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1476
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1478
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1486
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1497
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1498
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1503
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1505
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1512
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1514
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1525
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1533
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1534
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1547
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1548
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1556
msgid "Maximum width of a segmented region"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1557
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1558 src/libslic3r/PrintConfig.cpp:2166
#: src/libslic3r/PrintConfig.cpp:2175
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1565
msgid "Enable ironing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1566
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1572 src/libslic3r/PrintConfig.cpp:1574
msgid "Ironing Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1576
msgid "All top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1577
msgid "Topmost surface only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1578
msgid "All solid surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1584
msgid "Flow rate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1586
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1594
msgid "Spacing between ironing passes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1596
msgid "Distance between ironing lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1613
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1624
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1625
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1633
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1634
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1639
msgid "How to apply limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1640
msgid "Purpose of Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1642
msgid "How to apply the Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1644
msgid "Emit to G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1645
msgid "Use for time estimate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1646
msgid "Ignore"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1670
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1671
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1672
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1673
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1676
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1677
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1678
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1687
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1688
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1689
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1690
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1693
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1694
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1695
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1696
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1704
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1705
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1706
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1707
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1710
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1711
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1712
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1713
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1723
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1725
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1733
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1735
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1743
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1745
msgid ""
"Maximum acceleration when extruding (M204 P)\n"
"\n"
"Marlin (legacy) firmware flavor will use this also as travel acceleration "
"(M204 T)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1756
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1758
msgid "Maximum acceleration when retracting (M204 R)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1766
msgid "Maximum acceleration for travel moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1768
msgid "Maximum acceleration for travel moves (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1775 src/libslic3r/PrintConfig.cpp:1784
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1776
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1785
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1795
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1796
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1806
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1814
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1815
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
"(feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1820 src/libslic3r/PrintConfig.cpp:1832
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1826
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1827
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
"(feedrate 20 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1838 src/libslic3r/PrintConfig.cpp:1847
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1839
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1848
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1856
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1857
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1864
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1865
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1874
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1875
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1885
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1890
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1891
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1908
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1909
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1916
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1921
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1922
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1931
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1933
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1939
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1940
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1948
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1949
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1957 src/libslic3r/PrintConfig.cpp:1982
#: src/libslic3r/PrintConfig.cpp:1996 src/libslic3r/PrintConfig.cpp:2006
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1958
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1966
msgid ""
"This is the acceleration your printer will use for external perimeters. Set "
"zero to use the value for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1973
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1975
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1984
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1998
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2008
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2012
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2020
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2032
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2033
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2038
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2039
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2047
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2048
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2053
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2054
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2071
msgid "Raft contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2073
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2080
msgid "Raft expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2082
msgid "Expansion of the raft in XY plane for better stability."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2089
msgid "First layer density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2091
msgid "Density of the first raft or support layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2099
msgid "First layer expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2101
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2108
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2110
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2118
msgid "Slice resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2119
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2129
msgid "G-code resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2130
msgid ""
"Maximum deviation of exported G-code paths from their full resolution "
"counterparts. Very high resolution G-code requires huge amount of RAM to "
"slice and preview, also a 3D printer may stutter not being able to process a "
"high resolution G-code in a timely manner. On the other hand, a low "
"resolution G-code will produce a low poly effect and because the G-code "
"reduction is performed at each layer independently, visible artifacts may be "
"produced."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2141
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2142
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2148
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2149
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2156
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2157
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2162 src/libslic3r/PrintConfig.cpp:2170
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2163
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2164
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2171
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2172
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2180
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2181
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2188
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2189
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2190
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2197
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2198
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2199
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2207 src/libslic3r/PrintConfig.cpp:2215
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2208
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2216
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2223 src/libslic3r/PrintConfig.cpp:2224
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2225
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2231 src/libslic3r/PrintConfig.cpp:2232
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2233
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2240
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2242
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2244
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2245
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2246
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2253
msgid "Staggered inner seams"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2254
msgid ""
"This option causes the inner seams to be shifted backwards based on their "
"depth, forming a zigzag pattern."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2261
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2263
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2264
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2271
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2273
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2274
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2281
msgid "Distance from brim/object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2282
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2288
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2289
msgid "Height of skirt expressed in layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2295
msgid "Draft shield"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2296
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2301
msgid "Disabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2302
msgid "Limited"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2303
msgid "Enabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2309
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2310
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2311
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2319
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2320
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2329
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2331
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2341
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2343
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2344
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2350
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2352
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2358
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2360
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2372
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2384
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2396
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2402 src/libslic3r/PrintConfig.cpp:2403
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2409
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2410
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2418
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2419
msgid ""
"Temperature difference to be applied when an extruder is not active. The "
"value is not used when 'idle_temperature' in filament settings is defined."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2430
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2445
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2461
msgid "Color change G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2462
msgid "This G-code will be used as a code for the color change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2471
msgid "This G-code will be used as a code for the pause print"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2480
msgid "This G-code will be used as a custom code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2488
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2489
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2494
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2495
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2500
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2501
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2508
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2510
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2518
msgid "Slicing Mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2520
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2522
msgid "Regular"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2523
msgid "Even-odd"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2524
msgid "Close holes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2530
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2532
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2536
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2538
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2544
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2546
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2557
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2559
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2569 src/libslic3r/PrintConfig.cpp:3373
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2574
msgid "Top contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2576
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2582
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2583
msgid "0.1 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2584
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2590
msgid "Bottom contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2592
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2598 src/libslic3r/PrintConfig.cpp:2679
msgid "Same as top"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2606
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2608
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2613
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2619
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2621
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2630
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2640
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2642
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2647
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2649
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2656
msgid "Top interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2658
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2662 src/libslic3r/PrintConfig.cpp:2680
msgid "0 (off)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2663 src/libslic3r/PrintConfig.cpp:2681
msgid "1 (light)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2664 src/libslic3r/PrintConfig.cpp:2682
msgid "2 (default)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2665 src/libslic3r/PrintConfig.cpp:2683
msgid "3 (heavy)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2671
msgid "Bottom interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2673
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2689
msgid "Closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2691
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2699
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2701
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2708
msgid "Support material interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2710
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2719
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2721
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2724
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2731
msgid "Interface pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2733
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2745
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2747
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2756
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2765
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2770
msgid "Snug"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2771
msgid "Organic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2777
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2779
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive. This option "
"is only available when top contact Z distance is set to zero."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2786
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2788
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2800
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2802
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2808
msgid "Maximum Branch Angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2810
msgid ""
"The maximum angle of the branches, when the branches have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle to be able to have more reach."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2819
msgid "Preferred Branch Angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2821
msgid ""
"The preferred angle of the branches, when they do not have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle for branches to merge faster."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2830
msgid "Tip Diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2832
msgid "The diameter of the top of the tip of the branches of organic support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2839
msgid "Branch Diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2841
msgid ""
"The diameter of the thinnest branches of organic support. Thicker branches "
"are more sturdy. Branches towards the base will be thicker than this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2849
msgid "Branch Diameter Angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2851
msgid ""
"The angle of the branches' diameter as they gradually become thicker towards "
"the bottom. An angle of 0 will cause the branches to have uniform thickness "
"over their length. A bit of an angle can increase stability of the organic "
"support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2861
msgid "Branch Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2863
msgid ""
"Adjusts the density of the support structure used to generate the tips of "
"the branches. A higher value results in better overhangs but the supports "
"are harder to remove, thus it is recommended to enable top support "
"interfaces instead of a high branch density value if dense interfaces are "
"needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2875
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2878
msgid "Nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2884
msgid "Thick bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2886
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2892
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2894
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2900
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2901
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2913
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2926
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2939
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2954
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2955
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2963
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2966
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2973
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2981
msgid "Z travel"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2982
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2990
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2991
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2997
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2998
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3004
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3005
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3015
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3016
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3022
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3023
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3030
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3036
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3037
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3043
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3044
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3053
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3054
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3060
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3061
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3067
msgid "Width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3068
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3074
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3075
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3081 src/libslic3r/PrintConfig.cpp:3082
msgid "Wipe tower brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3090
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3091
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3098
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3099
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3105
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3106
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3112
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3114
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3122
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3123
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3132
msgid "Perimeter generator"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3134
msgid ""
"Classic perimeter generator produces perimeters with constant extrusion "
"width and for very thin areas is used gap-fill. Arachne engine produces "
"perimeters with variable extrusion width. This setting also affects the "
"Concentric infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3139
msgid "Classic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3140
msgid "Arachne"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3146
msgid "Perimeter transition length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3148
msgid ""
"When transitioning between different numbers of perimeters as the part "
"becomes thinner, a certain amount of space is allotted to split or join the "
"perimeter segments. If expressed as a percentage (for example 100%), it will "
"be computed based on the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3157
msgid "Perimeter transitioning filter margin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3159
msgid ""
"Prevent transitioning back and forth between one extra perimeter and one "
"less. This margin extends the range of extrusion widths which follow to "
"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
"Increasing this margin reduces the number of transitions, which reduces the "
"number of extrusion starts/stops and travel time. However, large extrusion "
"width variation can lead to under- or overextrusion problems. If expressed "
"as a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3172
msgid "Perimeter transitioning threshold angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3174
msgid ""
"When to create transitions between even and odd numbers of perimeters. A "
"wedge shape with an angle greater than this setting will not have "
"transitions and no perimeters will be printed in the center to fill the "
"remaining space. Reducing this setting reduces the number and length of "
"these center perimeters, but may leave gaps or overextrude."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3185
msgid "Perimeter distribution count"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3187
msgid ""
"The number of perimeters, counted from the center, over which the variation "
"needs to be spread. Lower values mean that the outer perimeters don't change "
"in width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3194
msgid "Minimum feature size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3196
msgid ""
"Minimum thickness of thin features. Model features that are thinner than "
"this value will not be printed, while features thicker than the Minimum "
"feature size will be widened to the Minimum perimeter width. If expressed as "
"a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3206
msgid "Minimum perimeter width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3208
msgid ""
"Width of the perimeter that will replace thin features (according to the "
"Minimum feature size) of the model. If the Minimum perimeter width is "
"thinner than the thickness of the feature, the perimeter will become as "
"thick as the feature itself. If expressed as a percentage (for example 85%), "
"it will be computed based on the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3273
msgid "Unavailable for this method.\n"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3277
msgid "Pinhead front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3279
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3286
msgid "Head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3288
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3295
msgid "Pinhead width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3297
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3305
msgid "Pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3307
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3315
msgid "Small pillar diameter percent"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3317
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3330
msgid "Max bridges on a pillar"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3332
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3344
msgid "Max weight on model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3347
msgid ""
"Maximum weight of sub-trees that terminate on the model instead of the print "
"bed. The weight is the sum of the lenghts of all branches emanating from the "
"endpoint."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3359
msgid "Pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3360
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3366
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3366
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3366
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3378
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3386
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase. The exact amount of "
"increase is unspecified and can change in the future."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3397
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3399
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3407
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3409
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3416
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3419
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3429
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3431
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3439
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3441
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3457
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3459
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3469
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3485
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3486
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3491
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3492
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3497
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3499
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3505
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3510
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3511
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3512
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3517
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3518
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3519
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3524
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3525
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3529
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3530
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3536 src/libslic3r/PrintConfig.cpp:4028
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3537
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3538
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3545 src/libslic3r/PrintConfig.cpp:4027
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3546
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3547
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3554 src/libslic3r/PrintConfig.cpp:4029
msgid "High viscosity"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3555
msgid "Tilt for high viscosity resin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3556
msgid "Time of the super slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3563
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3564
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3571 src/libslic3r/PrintConfig.cpp:3572
#: src/libslic3r/PrintConfig.cpp:3573
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3579 src/libslic3r/PrintConfig.cpp:3581
msgid "Printer scaling correction in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3580
msgid "Printer scaling X axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3587 src/libslic3r/PrintConfig.cpp:3589
msgid "Printer scaling correction in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3588
msgid "Printer scaling Y axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3595 src/libslic3r/PrintConfig.cpp:3597
msgid "Printer scaling correction in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3596
msgid "Printer scaling Z axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3603 src/libslic3r/PrintConfig.cpp:3604
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3605
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3611
msgid "Elephant foot minimum width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3613
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3620 src/libslic3r/PrintConfig.cpp:3621
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3622
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3641 src/libslic3r/PrintConfig.cpp:3642
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3649 src/libslic3r/PrintConfig.cpp:3650
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3656
msgid "Idle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3657
msgid ""
"Nozzle temperature when the tool is currently not used in multi-tool setups."
"This is only used when 'Ooze prevention' is active in Print Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3665 src/libslic3r/PrintConfig.cpp:3666
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3667
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3672 src/libslic3r/PrintConfig.cpp:3673
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3674
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3681
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3688
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3693
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3694
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3701 src/libslic3r/PrintConfig.cpp:3702
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3709 src/libslic3r/PrintConfig.cpp:3710
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3717 src/libslic3r/PrintConfig.cpp:3718
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3724 src/libslic3r/PrintConfig.cpp:3725
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3732 src/libslic3r/PrintConfig.cpp:3733
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3740 src/libslic3r/PrintConfig.cpp:3741
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3747 src/libslic3r/PrintConfig.cpp:3748
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3754 src/libslic3r/PrintConfig.cpp:3755
msgid "Correction for expansion in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3761 src/libslic3r/PrintConfig.cpp:3762
msgid "Correction for expansion in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3768 src/libslic3r/PrintConfig.cpp:3769
msgid "Correction for expansion in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3775
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3776
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3788 src/libslic3r/PrintConfig.cpp:3799
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3810
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3812
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3817
msgid "Support tree type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3818
msgid "Support tree building strategy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3821
msgid "Branching (experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3830
msgid "Support only in enforced regions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3832
msgid "Only create support if it lies in a support enforcer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3839
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3845
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3847
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3853
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3855
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3860
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3862
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3870
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3871
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3884
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3885
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3895
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3897
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3917
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3919
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3930
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3935
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3937
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3942
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3944
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3953
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3955
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3962
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3964
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3971
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3974
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3981
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3983
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3988
msgid "Wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3990
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3998
msgid "Accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4000
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4010
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4022
msgid "Print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4024
msgid ""
"A slower printing profile might be necessary when using materials with "
"higher viscosity or with some hollowed parts. It slows down the tilt "
"movement and adds a delay before exposure."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4035
msgid "Format of the output SLA archive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4040
msgid "SLA output precision"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4041
msgid "Minimum resolution in nanometers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4510
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4511
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4522
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4523
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4528
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4529
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4533
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4534
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4538
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4539
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4544
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4549
msgid "G-code viewer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4550
msgid "Visualize an already sliced and saved G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4556
msgid "OpenGL version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4557
msgid "Select the specified OpenGL version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4562
msgid "OpenGL debug output"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4563
msgid "Activate OpenGL debug output on graphic cards which support it"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4569
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4570
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4575
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4576
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4581
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4582
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4586
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4587
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4591
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4592
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4596
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4597
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4607
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4608
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4613
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4634
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4635
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4639
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4640
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4643
msgid "Ensure on bed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4644
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4648
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4649
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4653
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4654
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4658
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4663
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4667
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4671
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4672
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4676
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4677
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4682
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4687
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4690
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4691
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4695
msgid "Delete files after loading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4696
msgid "Delete files after loading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4704
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4705
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4708
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4709
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4713
msgid "Bail out on unknown configuration values"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4714
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4715
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4720
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4721
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4724
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4725
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4729
msgid "Single instance mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4730
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4735
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4736
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4739
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4740
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4746
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4747
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/PrintObject.cpp:136
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:241
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:420
msgid "Searching support spots"
msgstr ""

#: src/libslic3r/PrintObject.cpp:445
msgid "Generating support material"
msgstr ""

#: src/libslic3r/PrintObject.cpp:466
msgid "Estimating curled extrusions"
msgstr ""

#: resources/data/hints.ini: [hint:Fuzzy skin]
msgid "Fuzzy skin\nDid you know that you can create rough fibre-like texture on the sides of your models using the<a>Fuzzy skin</a>feature? You can also use modifiers to apply fuzzy-skin only to a portion of your model."
msgstr ""

#: resources/data/hints.ini: [hint:Shapes gallery]
msgid "Shapes gallery\nDid you know that PrusaSlicer has a Shapes Gallery? You can use the included models as modifiers, negative volumes or as printable objects. Right-click the platter and select<a>Add Shape - Gallery</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Arrange settings]
msgid "Arrange settings\nDid you know that you can right-click the<a>Arrange icon</a>to adjust the size of the gap between objects and to allow automatic rotations?"
msgstr ""

#: resources/data/hints.ini: [hint:Negative volume]
msgid "Negative volume\nDid you know that you can subtract one mesh from another using the Negative volume modifier? That way you can, for example, create easily resizable holes directly in PrusaSlicer. Read more in the documentation. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Simplify mesh]
msgid "Simplify mesh\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Reload from disk]
msgid "Reload from disk\nDid you know that if you created a newer version of your model, you can simply reload it in PrusaSlicer? Right-click the model in the 3D view and choose Reload from disk. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Hiding sidebar]
msgid "Hiding sidebar\nDid you know that you can hide the right sidebar using the shortcut <b>Shift+Tab</b>? You can also enable the icon for this from the<a>Preferences</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Perspective camera]
msgid "Perspective camera\nDid you know that you can use the <b>K</b> key to quickly switch between an orthographic and perspective camera?"
msgstr ""

#: resources/data/hints.ini: [hint:Camera Views]
msgid "Camera Views\nDid you know that you can use the number keys <b>0-6</b> to quickly switch between predefined camera angles?"
msgstr ""

#: resources/data/hints.ini: [hint:Place on face]
msgid "Place on face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the<a>Place on face</a>function or press the <b>F</b> key."
msgstr ""

#: resources/data/hints.ini: [hint:Set number of instances]
msgid "Set number of instances\nDid you know that you can right-click a model and set an exact number of instances instead of copy-pasting it several times?"
msgstr ""

#: resources/data/hints.ini: [hint:Combine infill]
msgid "Combine infill\nDid you know that you can print the infill with a higher layer height compared to perimeters to save print time using the setting<a>Combine infill every</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Variable layer height]
msgid "Variable layer height\nDid you know that you can print different regions of your model with a different layer height and smooth the transitions between them? Try the<a>Variable layer height tool</a>. (Not available for SLA printers.)"
msgstr ""

#: resources/data/hints.ini: [hint:Undo/redo history]
msgid "Undo/redo history\nDid you know that you can right-click the<a>undo/redo arrows</a>to see the history of changes and to undo or redo several actions at once?"
msgstr ""

#: resources/data/hints.ini: [hint:Different layer height for each model]
msgid "Different layer height for each model\nDid you know that you can print each model on the plater with a different layer height? Right-click the model in the 3D view, choose Layers and Perimeters and adjust the values in the right panel. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Solid infill threshold area]
msgid "Solid infill threshold area\nDid you know that you can make parts of your model with a small cross-section be filled with solid infill automatically? Set the<a>Solid infill threshold area</a>. (Expert mode only.)"
msgstr ""

#: resources/data/hints.ini: [hint:Search functionality]
msgid "Search functionality\nDid you know that you use the<a>Search</a>tool to quickly find a specific PrusaSlicer setting? Or use the familiar shortcut <b>Ctrl+F</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Box selection]
msgid "Box selection\nDid you know that you can do a box selection with Shift+Mouse drag? You can also box-deselect objects with <b>Alt+Mouse drag</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Zoom on selected objects or on all objects if none selected]
msgid "Zoom on selected objects or on all objects if none selected\nDid you know that you can zoom in on selected objects by pressing the <b>Z</b> key? If none are selected, the camera will zoom on all objects in the scene."
msgstr ""

#: resources/data/hints.ini: [hint:Printable toggle]
msgid "Printable toggle\nDid you know that you can disable the G-code generation for the selected model without having to move or delete it? Toggle the Printable property of a model from the Right-click context menu."
msgstr ""

#: resources/data/hints.ini: [hint:Mirror]
msgid "Mirror\nDid you know that you can mirror the selected model to create a reversed version of it? Right-click the model, select Mirror and pick the mirror axis."
msgstr ""

#: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45 degrees]
msgid "PageUp / PageDown quick rotation by 45 degrees\nDid you know that you can quickly rotate selected models by 45 degrees around the Z-axis clockwise or counter-clockwise by pressing <b>Page Up</b> or <b>Page Down</b> respectively?"
msgstr ""

#: resources/data/hints.ini: [hint:Load config from G-code]
msgid "Load config from G-code\nDid you know that you can use File-Import-Import Config to load print, filament and printer profiles from an existing G-code file? Similarly, you can use File-Import-Import SL1 / SL1S archive, which also lets you reconstruct 3D models from the voxel data."
msgstr ""

#: resources/data/hints.ini: [hint:Ironing]
msgid "Ironing\nDid you know that you can smooth top surfaces of prints using Ironing? The nozzle will run a special second infill phase at the same layer to fill in holes and flatten any lifted plastic. Read more in the documentation. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on supports]
msgid "Paint-on supports\nDid you know that you can paint directly on the object and select areas, where supports should be enforced or blocked? Try the<a>Paint-on supports</a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on seam]
msgid "Paint-on seam\nDid you know that you can paint directly on the object and select where to place the start/endpoint of each perimeter loop? Try the<a>Seam painting</a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Insert Pause]
msgid "Insert Pause\nDid you know that you can schedule the print to pause at a specific layer? Right-click the layer slider in the Preview and select Add pause print (M601). This can be used to insert magnets, weights or nuts into your prints. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Insert Custom G-code]
msgid "Insert Custom G-code\nDid you know that you can insert a custom G-code at a specific layer? Left-click the layer in the Preview, Right-click the plus icon and select Add custom G-code. With this function you can, for example, create a temperature tower. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Configuration snapshots]
msgid "Configuration snapshots\nDid you know that you can roll back to a complete backup of all system and user profiles? You can view and move back and forth between snapshots using the Configuration - <a>Configuration snapshots menu</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Minimum shell thickness]
msgid "Minimum shell thickness\nDid you know that instead of the number of top and bottom layers, you can define the<a>Minimum shell thickness</a>in millimeters? This feature is especially useful when using the variable layer height function."
msgstr ""

#: resources/data/hints.ini: [hint:Settings in non-modal window]
msgid "Settings in non-modal window\nDid you know that you can open the Settings in a new non-modal window? This means you can have settings open on one screen and the G-code Preview on the other. Go to the<a>Preferences</a>and select Settings in non-modal window."
msgstr ""

#: resources/data/hints.ini: [hint:Adaptive infills]
msgid "Adaptive infills\nDid you know that you can use the Adaptive cubic and Support cubic infills to decrease the print time and lower the filament consumption? Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Lightning infill]
msgid "Lightning infill\nDid you know that you can use the Lightning infill to support only the top surfaces, save a lot of the filament, and decrease the print time? Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Fullscreen mode]
msgid "Fullscreen mode\nDid you know that you can switch PrusaSlicer to fullscreen mode? Use the <b>F11</b> hotkey."
msgstr ""

#: resources/data/hints.ini: [hint:Printables integration]
msgid "Printables.com integration\nDid you know that when you are browsing Printables.com, you can send 3D model files to PrusaSlicer with a single click? Learn more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Cut tool]
msgid "Cut tool\nDid you know that you can cut a model at any angle and even create aligning pins with the updated <a>Cut tool</a>? Learn more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Measurement tool]
msgid "Measurement tool\nDid you know that you can <a>measure</a> the distances between points, edges and planes, the radius of a hole or the angle between edges or planes? Learn more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Text tool]
msgid "Text tool\nDid you know that you can add custom text labels to your models or even use the text as a modifier? Learn more in the documentation."
msgstr ""