# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-12-01 09:16+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:303 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:267 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:141 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:210 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:367 #: src/slic3r/GUI/GUI_App.cpp:262 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:269 src/slic3r/GUI/GUI_App.cpp:268 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:270 src/slic3r/GUI/GUI_App.cpp:268 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:271 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:272 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:308 msgid "Copy Version Info" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85 msgid "" "Please save your project and restart PrusaSlicer. We would be glad if you " "reported the issue." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:204 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:199 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:286 msgid "Access violation" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:288 msgid "Illegal instruction" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290 msgid "Divide by zero" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:292 msgid "Overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:294 msgid "Underflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:297 msgid "Floating reserved operand" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300 msgid "Stack overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:659 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:726 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:690 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710 msgid "Unknown error occured during exporting G-code." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:695 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?\n" "Error message: %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:698 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:701 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:704 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:707 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:729 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:751 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:31 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:218 src/slic3r/GUI/Plater.cpp:205 #: src/slic3r/GUI/Tab.cpp:2697 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:32 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:33 src/libslic3r/PrintConfig.cpp:991 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:49 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:58 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:262 #: src/slic3r/GUI/ConfigWizard.cpp:1476 src/slic3r/GUI/ConfigWizard.cpp:1490 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100 #: src/slic3r/GUI/GCodeViewer.cpp:3125 src/slic3r/GUI/GCodeViewer.cpp:3131 #: src/slic3r/GUI/GCodeViewer.cpp:3139 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478 #: src/slic3r/GUI/ObjectDataViewModel.cpp:134 #: src/slic3r/GUI/WipeTowerDialog.cpp:116 src/libslic3r/PrintConfig.cpp:247 #: src/libslic3r/PrintConfig.cpp:264 src/libslic3r/PrintConfig.cpp:271 #: src/libslic3r/PrintConfig.cpp:434 src/libslic3r/PrintConfig.cpp:494 #: src/libslic3r/PrintConfig.cpp:520 src/libslic3r/PrintConfig.cpp:595 #: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:653 #: src/libslic3r/PrintConfig.cpp:784 src/libslic3r/PrintConfig.cpp:795 #: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:994 #: src/libslic3r/PrintConfig.cpp:1203 src/libslic3r/PrintConfig.cpp:1269 #: src/libslic3r/PrintConfig.cpp:1279 src/libslic3r/PrintConfig.cpp:1553 #: src/libslic3r/PrintConfig.cpp:1747 src/libslic3r/PrintConfig.cpp:1808 #: src/libslic3r/PrintConfig.cpp:1826 src/libslic3r/PrintConfig.cpp:1844 #: src/libslic3r/PrintConfig.cpp:1907 src/libslic3r/PrintConfig.cpp:1917 #: src/libslic3r/PrintConfig.cpp:2031 src/libslic3r/PrintConfig.cpp:2040 #: src/libslic3r/PrintConfig.cpp:2059 src/libslic3r/PrintConfig.cpp:2080 #: src/libslic3r/PrintConfig.cpp:2092 src/libslic3r/PrintConfig.cpp:2100 #: src/libslic3r/PrintConfig.cpp:2141 src/libslic3r/PrintConfig.cpp:2149 #: src/libslic3r/PrintConfig.cpp:2159 src/libslic3r/PrintConfig.cpp:2167 #: src/libslic3r/PrintConfig.cpp:2175 src/libslic3r/PrintConfig.cpp:2237 #: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2537 #: src/libslic3r/PrintConfig.cpp:2554 src/libslic3r/PrintConfig.cpp:2653 #: src/libslic3r/PrintConfig.cpp:2662 src/libslic3r/PrintConfig.cpp:2712 #: src/libslic3r/PrintConfig.cpp:2864 src/libslic3r/PrintConfig.cpp:2952 #: src/libslic3r/PrintConfig.cpp:2959 src/libslic3r/PrintConfig.cpp:2966 #: src/libslic3r/PrintConfig.cpp:2980 src/libslic3r/PrintConfig.cpp:3004 #: src/libslic3r/PrintConfig.cpp:3014 src/libslic3r/PrintConfig.cpp:3024 #: src/libslic3r/PrintConfig.cpp:3208 src/libslic3r/PrintConfig.cpp:3249 #: src/libslic3r/PrintConfig.cpp:3409 src/libslic3r/PrintConfig.cpp:3418 #: src/libslic3r/PrintConfig.cpp:3427 src/libslic3r/PrintConfig.cpp:3437 #: src/libslic3r/PrintConfig.cpp:3502 src/libslic3r/PrintConfig.cpp:3512 #: src/libslic3r/PrintConfig.cpp:3524 src/libslic3r/PrintConfig.cpp:3544 #: src/libslic3r/PrintConfig.cpp:3554 src/libslic3r/PrintConfig.cpp:3564 #: src/libslic3r/PrintConfig.cpp:3582 src/libslic3r/PrintConfig.cpp:3597 #: src/libslic3r/PrintConfig.cpp:3611 src/libslic3r/PrintConfig.cpp:3622 #: src/libslic3r/PrintConfig.cpp:3635 src/libslic3r/PrintConfig.cpp:3680 #: src/libslic3r/PrintConfig.cpp:3690 src/libslic3r/PrintConfig.cpp:3699 #: src/libslic3r/PrintConfig.cpp:3709 src/libslic3r/PrintConfig.cpp:3725 #: src/libslic3r/PrintConfig.cpp:3749 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:66 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:79 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:80 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:81 src/slic3r/GUI/GUI_Preview.cpp:252 #: src/libslic3r/ExtrusionEntity.cpp:331 src/libslic3r/ExtrusionEntity.cpp:366 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:179 #: src/slic3r/GUI/GUI_ObjectList.cpp:1695 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:203 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:249 src/slic3r/GUI/GCodeViewer.cpp:3654 #: src/slic3r/GUI/MainFrame.cpp:2135 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:273 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:283 src/slic3r/GUI/BedShapeDialog.cpp:354 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/BedShapeDialog.cpp:362 #: src/slic3r/GUI/Tab.cpp:3672 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:317 src/slic3r/GUI/BedShapeDialog.cpp:388 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:344 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:508 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:514 src/slic3r/GUI/BedShapeDialog.cpp:562 #: src/slic3r/GUI/BedShapeDialog.cpp:584 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:525 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:533 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:537 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:552 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:574 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:95 src/slic3r/GUI/ConfigWizard.cpp:1396 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:224 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:231 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:42 msgid "Revert color to default" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:57 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:58 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:62 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:49 msgid "" "Layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:51 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1436 #: src/libslic3r/PrintConfig.cpp:260 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:62 msgid "" "First layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:64 src/libslic3r/PrintConfig.cpp:1199 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:84 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:92 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:94 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:124 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:128 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:130 #: src/slic3r/GUI/ConfigManipulation.cpp:151 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:146 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:149 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:168 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:171 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:172 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:199 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:202 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:204 #: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128 #: src/slic3r/GUI/Plater.cpp:457 src/slic3r/GUI/Tab.cpp:1489 #: src/slic3r/GUI/Tab.cpp:1491 src/libslic3r/PrintConfig.cpp:449 #: src/libslic3r/PrintConfig.cpp:690 src/libslic3r/PrintConfig.cpp:714 #: src/libslic3r/PrintConfig.cpp:1068 src/libslic3r/PrintConfig.cpp:1082 #: src/libslic3r/PrintConfig.cpp:1119 src/libslic3r/PrintConfig.cpp:1359 #: src/libslic3r/PrintConfig.cpp:1369 src/libslic3r/PrintConfig.cpp:1438 #: src/libslic3r/PrintConfig.cpp:1458 src/libslic3r/PrintConfig.cpp:1477 #: src/libslic3r/PrintConfig.cpp:2298 src/libslic3r/PrintConfig.cpp:2315 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:332 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:335 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:346 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:349 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:314 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28 #: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:317 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1323 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1325 msgid "SLA print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340 #: src/slic3r/GUI/Plater.cpp:817 src/libslic3r/Preset.cpp:1326 msgid "SLA material" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1327 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1353 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:262 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:266 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:330 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:330 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651 #: src/slic3r/GUI/Preferences.cpp:414 src/slic3r/GUI/Tab.cpp:3754 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1157 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:332 src/slic3r/GUI/ConfigWizard.cpp:652 #: src/slic3r/GUI/DoubleSlider.cpp:2032 src/slic3r/GUI/Plater.cpp:429 #: src/slic3r/GUI/Plater.cpp:575 src/slic3r/GUI/Preferences.cpp:416 #: src/libslic3r/PrintConfig.cpp:1258 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:484 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:486 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:488 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:490 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:495 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:498 msgid "" "Perform desktop integration (Sets this binary to be searchable by the " "system)." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:550 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:640 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:642 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:643 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:720 src/slic3r/GUI/ConfigWizard.cpp:892 #: src/slic3r/GUI/ConfigWizard.cpp:952 src/slic3r/GUI/ConfigWizard.cpp:1088 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:752 msgid "" "%1% marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:752 src/slic3r/GUI/ConfigWizard.cpp:2043 #: src/slic3r/GUI/ConfigWizard.cpp:2910 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:752 msgid "SLA materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:755 msgid "All installed printers are compatible with the selected %1%." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1324 msgid "filament" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:778 msgid "" "Only the following installed printers are compatible with the selected " "filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:779 msgid "" "Only the following installed printers are compatible with the selected SLA " "materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1175 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1175 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1177 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1179 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1206 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1206 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1214 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1218 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1224 src/slic3r/GUI/Preferences.cpp:174 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1228 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1231 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1236 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726 #: src/slic3r/GUI/Plater.cpp:3489 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1246 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1250 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1259 msgid "Files association" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1261 src/slic3r/GUI/Preferences.cpp:156 msgid "Associate .3mf files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/Preferences.cpp:163 msgid "Associate .stl files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1272 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1274 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1279 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1280 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1281 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1287 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1288 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1322 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1326 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1357 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1357 src/slic3r/GUI/Tab.cpp:2304 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1361 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1396 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1399 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1433 src/slic3r/GUI/Field.cpp:255 #: src/slic3r/GUI/Field.cpp:314 src/slic3r/GUI/Field.cpp:1553 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:429 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1457 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1457 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1472 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1475 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1485 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1486 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1489 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1547 msgid "Nozzle and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1547 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1563 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1564 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1567 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1568 src/slic3r/GUI/ConfigWizard.cpp:1582 #: src/libslic3r/PrintConfig.cpp:392 src/libslic3r/PrintConfig.cpp:1179 #: src/libslic3r/PrintConfig.cpp:1233 src/libslic3r/PrintConfig.cpp:2774 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1577 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1578 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1581 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2043 src/slic3r/GUI/ConfigWizard.cpp:2913 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2097 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2102 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2338 msgid "" "Following printer profiles has no default filament: %1%Please select one " "manually." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2339 msgid "" "Following printer profiles has no default material: %1%Please select one " "manually." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2340 src/slic3r/GUI/ConfigWizard.cpp:2438 #: src/slic3r/GUI/DoubleSlider.cpp:2523 src/slic3r/GUI/DoubleSlider.cpp:2544 #: src/slic3r/GUI/GUI.cpp:232 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2459 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2463 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2477 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2481 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2523 msgid "Configuration is edited in ConfigWizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2566 msgid "All user presets will be deleted." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2596 msgid "A new vendor was installed and one of its printers will be activated" msgid_plural "" "New vendors were installed and one of theirs printers will be activated" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/ConfigWizard.cpp:2625 msgid "Do you want to continue changing the configuration?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2691 msgid "A new Printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2696 msgid "Some Printers were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2717 msgid "A new filament was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2718 msgid "A new SLA material was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2726 msgid "Some filaments were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2726 msgid "Some SLA materials were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2770 msgid "Custom printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2855 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2858 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2859 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2860 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2861 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:490 #: src/slic3r/GUI/FirmwareDialog.cpp:153 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:878 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2881 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2889 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2910 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2910 src/slic3r/GUI/ConfigWizard.cpp:2913 #: src/slic3r/GUI/GUI_ObjectList.cpp:3775 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2913 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3034 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3035 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3037 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3038 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232 msgid "" "Performing desktop integration failed - boost::filesystem::canonical did not " "return appimage path." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243 msgid "Performing desktop integration failed - Could not find executable." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:378 msgid "" "Performing desktop integration failed because the application directory was " "not found." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:419 msgid "" "Performing desktop integration failed - could not create Gcodeviewer desktop " "file. PrusaSlicer desktop file was probably created successfully." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459 #: src/slic3r/GUI/GUI_App.cpp:2129 msgid "Desktop Integration" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:466 msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:480 msgid "Perform" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:486 #: src/slic3r/GUI/GLCanvas3D.cpp:4704 src/slic3r/GUI/KBShortcutsDialog.cpp:97 #: src/slic3r/GUI/MainFrame.cpp:1330 msgid "Undo" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:111 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1381 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1383 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1387 src/slic3r/GUI/DoubleSlider.cpp:2256 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1390 #, possible-c-format msgid "" "Jump to height %s\n" "Set ruler mode\n" "or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1393 #, possible-c-format msgid "" "Jump to height %s\n" "or Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1398 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1400 msgid "This is wipe tower layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1410 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing sequentually." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1414 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1428 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1430 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1432 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1433 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1435 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1436 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1442 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1460 msgid "continue" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1468 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1469 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1471 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1473 msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1475 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1482 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1484 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1487 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1490 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1493 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1498 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1500 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1501 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1604 src/slic3r/GUI/DoubleSlider.cpp:1635 #: src/slic3r/GUI/GUI_Factories.cpp:778 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1605 src/slic3r/GUI/GUI_Factories.cpp:779 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1614 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1614 src/slic3r/GUI/GUI_Factories.cpp:740 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1615 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1617 src/slic3r/GUI/GUI_Factories.cpp:787 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1636 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1644 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1645 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1970 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1981 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1985 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1988 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2006 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2007 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2008 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2014 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2015 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2016 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2017 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2027 src/slic3r/GUI/DoubleSlider.cpp:2256 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2032 msgid "Hide ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2036 msgid "Show object height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2036 msgid "Show object height on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2040 msgid "Show estimated print time" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2040 msgid "Show estimated print time on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2044 msgid "Ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2044 msgid "Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2049 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2053 msgid "Set auto color changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2088 msgid "This action will cause deletion of all ticks on vertical slider." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2089 src/slic3r/GUI/Tab.cpp:1305 msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2090 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1137 src/slic3r/GUI/GUI.cpp:245 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:645 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:675 #: src/slic3r/GUI/WipeTowerDialog.cpp:58 src/slic3r/GUI/WipeTowerDialog.cpp:443 msgid "Warning" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2217 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2218 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2239 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2240 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2255 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2255 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2516 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2517 src/slic3r/GUI/DoubleSlider.cpp:2533 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2519 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2520 src/slic3r/GUI/DoubleSlider.cpp:2541 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2534 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2537 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2539 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2540 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:537 #: src/slic3r/GUI/GUI_ObjectList.cpp:549 src/slic3r/GUI/GUI_ObjectList.cpp:978 #: src/slic3r/GUI/GUI_ObjectList.cpp:1960 #: src/slic3r/GUI/GUI_ObjectList.cpp:4276 #: src/slic3r/GUI/ObjectDataViewModel.cpp:250 #: src/slic3r/GUI/ObjectDataViewModel.cpp:352 #: src/slic3r/GUI/ObjectDataViewModel.cpp:376 #: src/slic3r/GUI/ObjectDataViewModel.cpp:607 src/libslic3r/PrintConfig.cpp:771 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60 #: src/libslic3r/PrintConfig.cpp:636 src/libslic3r/PrintConfig.cpp:1372 #: src/libslic3r/PrintConfig.cpp:2069 src/libslic3r/PrintConfig.cpp:2244 #: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2572 #: src/libslic3r/PrintConfig.cpp:2620 src/libslic3r/PrintConfig.cpp:2639 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166 msgid "If enabled, random sequence of the selected extruders will be used." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174 msgid "If enabled, a repetition of the next random color will be allowed." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:190 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:193 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:825 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1070 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1082 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:226 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:266 #, possible-c-format msgid "" "Input value is out of range\n" "Are you sure that %s is a correct value and that you want to continue?" msgstr "" #: src/slic3r/GUI/Field.cpp:269 src/slic3r/GUI/Field.cpp:333 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/Field.cpp:282 src/slic3r/GUI/Field.cpp:380 #: src/slic3r/GUI/Field.cpp:1565 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:330 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:387 msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:154 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:201 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:285 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:286 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:334 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:421 src/slic3r/GUI/FirmwareDialog.cpp:456 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:438 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:550 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:651 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:653 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:788 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:813 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:816 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:297 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:372 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:818 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:828 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:831 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:832 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:863 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:310 #: src/slic3r/GUI/Mouse3DController.cpp:543 #: src/slic3r/GUI/PrintHostDialogs.cpp:259 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:122 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:916 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:917 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:920 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1392 msgid "Shape Gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:76 msgid "Select shape from the gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:100 msgid "Add to bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:101 msgid "Add selected shape(s) to the bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:117 msgid "Add" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:117 msgid "Add one or more custom shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/GalleryDialog.cpp:508 #: src/slic3r/GUI/GLCanvas3D.cpp:4495 src/slic3r/GUI/GUI_Factories.cpp:444 #: src/slic3r/GUI/Tab.cpp:3672 msgid "Delete" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:118 msgid "Delete one or more custom shape. You can't delete system shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:402 msgid "Choose one or more files (STL, OBJ):" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:442 msgid "" "It looks like selected %1%-file has an error or is destructed.\n" "We can't load this file" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:453 msgid "Choose one PNG file:" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:466 msgid "Replacing of the PNG" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:510 msgid "Change thumbnail" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:551 src/slic3r/GUI/GalleryDialog.cpp:556 msgid "Loading of the \"%1%\"" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:264 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1449 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1509 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1844 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2991 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2991 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3125 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3131 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3139 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3139 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3189 src/slic3r/GUI/GCodeViewer.cpp:3190 #: src/slic3r/GUI/GCodeViewer.cpp:3239 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3200 src/slic3r/GUI/GCodeViewer.cpp:3239 #: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:957 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3200 src/slic3r/GUI/GCodeViewer.cpp:3239 #: src/slic3r/GUI/RammingChart.cpp:90 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3239 src/slic3r/GUI/GCodeViewer.cpp:3250 #: src/slic3r/GUI/GCodeViewer.cpp:3511 msgid "Used filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3242 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3243 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3244 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3245 msgid "Fan Speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3246 msgid "Temperature (°C)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3247 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3250 src/slic3r/GUI/GUI_Preview.cpp:224 #: src/slic3r/GUI/GUI_Preview.cpp:957 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3253 src/slic3r/GUI/GUI_Preview.cpp:225 #: src/slic3r/GUI/GUI_Preview.cpp:956 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3291 src/slic3r/GUI/GCodeViewer.cpp:3337 #: src/slic3r/GUI/GCodeViewer.cpp:3342 src/slic3r/GUI/GUI_ObjectList.cpp:312 #: src/slic3r/GUI/wxExtensions.cpp:536 src/libslic3r/PrintConfig.cpp:766 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3314 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3337 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3436 src/slic3r/GUI/GCodeViewer.cpp:3492 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3455 src/slic3r/GUI/GCodeViewer.cpp:3490 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3491 src/slic3r/GUI/GCodeViewer.cpp:3525 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3508 src/slic3r/GUI/GCodeViewer.cpp:3511 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3508 src/slic3r/GUI/GCodeViewer.cpp:3511 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3508 src/slic3r/GUI/GCodeViewer.cpp:3511 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3554 src/slic3r/GUI/GUI_Preview.cpp:1048 #: src/libslic3r/PrintConfig.cpp:2869 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3557 msgid "Movement" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3558 msgid "Extrusion" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3559 src/slic3r/GUI/Tab.cpp:1808 #: src/slic3r/GUI/Tab.cpp:2744 msgid "Retraction" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3576 src/slic3r/GUI/GCodeViewer.cpp:3579 #: src/slic3r/GUI/GUI_Preview.cpp:1049 msgid "Wipe" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3611 src/slic3r/GUI/GUI_Preview.cpp:257 #: src/slic3r/GUI/GUI_Preview.cpp:272 msgid "Options" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3614 src/slic3r/GUI/GUI_Preview.cpp:1050 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3615 src/slic3r/GUI/GUI_Preview.cpp:1051 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3616 src/slic3r/GUI/GUI_Preview.cpp:1052 msgid "Seams" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3617 src/slic3r/GUI/GUI_Preview.cpp:1053 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3618 src/slic3r/GUI/GUI_Preview.cpp:1054 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3619 src/slic3r/GUI/GUI_Preview.cpp:1055 msgid "Print pauses" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3620 src/slic3r/GUI/GUI_Preview.cpp:1056 msgid "Custom G-codes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3640 src/slic3r/GUI/GCodeViewer.cpp:3659 #: src/slic3r/GUI/GUI.cpp:341 src/slic3r/GUI/Plater.cpp:818 #: src/libslic3r/PrintConfig.cpp:296 msgid "Printer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3642 src/slic3r/GUI/GCodeViewer.cpp:3664 #: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:814 msgid "Print settings" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3645 src/slic3r/GUI/GCodeViewer.cpp:3671 #: src/slic3r/GUI/GUI.cpp:339 src/slic3r/GUI/Plater.cpp:815 #: src/slic3r/GUI/Tab.cpp:1908 src/slic3r/GUI/Tab.cpp:1909 msgid "Filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3684 msgid "Estimated printing times" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3703 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3704 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3711 src/libslic3r/PrintConfig.cpp:1157 #: src/libslic3r/PrintConfig.cpp:1175 src/libslic3r/PrintConfig.cpp:1185 #: src/libslic3r/PrintConfig.cpp:1229 msgid "First layer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3712 msgid "Total" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3746 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3750 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:225 src/slic3r/GUI/GLCanvas3D.cpp:4642 #: src/slic3r/GUI/ObjectDataViewModel.cpp:53 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:227 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:229 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:231 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:233 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:235 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:237 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:239 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:241 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:243 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:245 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:248 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:254 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:257 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:268 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:274 src/libslic3r/PrintConfig.cpp:790 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:286 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:295 src/slic3r/GUI/GLCanvas3D.cpp:4071 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:561 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:676 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1276 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1284 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1292 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1704 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2573 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:560 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2656 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:562 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3260 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3781 src/slic3r/GUI/GLCanvas3D.cpp:4603 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3782 src/slic3r/GUI/GLCanvas3D.cpp:4603 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3783 src/slic3r/GUI/GLCanvas3D.cpp:4604 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3783 src/slic3r/GUI/GLCanvas3D.cpp:4604 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3784 src/slic3r/GUI/GLCanvas3D.cpp:4605 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3931 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3931 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3951 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3951 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3971 src/slic3r/GUI/GLCanvas3D.cpp:4621 #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 src/slic3r/GUI/Search.cpp:435 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3985 src/slic3r/GUI/GLCanvas3D.cpp:3993 #: src/slic3r/GUI/Search.cpp:441 msgid "Enter a search term" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4024 msgid "Arrange options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4054 msgid "Press %1%left mouse button to enter the exact value" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4056 msgid "Spacing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4063 msgid "Enable rotations (slow)" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4081 src/slic3r/GUI/GLCanvas3D.cpp:4513 #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Plater.cpp:1658 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4487 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4504 src/slic3r/GUI/KBShortcutsDialog.cpp:96 #: src/slic3r/GUI/Plater.cpp:5402 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4513 src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4513 msgid "Click right mouse button to show arrangement options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4535 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4544 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4556 src/slic3r/GUI/GUI_Factories.cpp:1089 #: src/slic3r/GUI/GUI_Factories.cpp:1113 src/slic3r/GUI/GUI_Factories.cpp:1124 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4567 src/slic3r/GUI/GUI_Factories.cpp:1092 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4580 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4590 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4704 src/slic3r/GUI/GLCanvas3D.cpp:4743 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4727 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4743 src/slic3r/GUI/KBShortcutsDialog.cpp:98 #: src/slic3r/GUI/MainFrame.cpp:1333 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4765 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6382 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6383 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6384 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6385 msgid "Some objects are not visible during editing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6387 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6461 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6476 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4308 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478 msgid "in" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:199 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:200 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:205 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33 #: src/slic3r/GUI/ObjectDataViewModel.cpp:49 msgid "Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Brush size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 msgid "Brush shape" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:474 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:469 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:270 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43 #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:68 #: src/libslic3r/PrintConfig.cpp:1141 msgid "Triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56 msgid "Highlight overhang by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126 msgid "Tool type" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127 msgid "Brush" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:128 msgid "Smart fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:131 msgid "Smart fill angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:132 msgid "Split triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67 msgid "On overhangs only" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:179 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:199 msgid "" "Preselects faces by overhang angle. It is possible to restrict paintable " "facets to only preselected faces when the option \"%1%\" is enabled." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:231 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:382 msgid "Paints facets according to the chosen painting brush." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:239 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:395 msgid "" "Paints neighboring facets whose relative angle is less or equal to set angle." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:243 msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:258 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:423 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:155 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:267 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:432 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:163 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:276 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:441 msgid "Paints only one facet." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:290 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:307 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:319 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:455 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:474 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:486 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:137 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:142 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296 msgid "Splits bigger facets into smaller ones while the object is painted." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:340 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:348 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:505 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:513 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:182 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:190 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:353 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:518 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:195 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:404 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:405 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:472 msgid "Add supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:41 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33 #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:57 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34 #: src/libslic3r/PrintConfig.cpp:3741 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:286 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:402 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:596 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:673 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:767 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:817 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:27 msgid "" "Your printer has more extruders than the multi-material painting gizmo " "supports. For this reason, only the first %1% extruders will be able to be " "used for painting." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:45 #: src/slic3r/GUI/ObjectDataViewModel.cpp:51 msgid "Multimaterial painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116 msgid "First color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118 msgid "Second color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:120 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:701 msgid "Remove painted color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121 msgid "Clear all" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:129 msgid "Bucket fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:408 msgid "Paints neighboring facets that have the same color." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:461 msgid "Split bigger facets into smaller ones while the object is painted." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:704 msgid "Painted using: Extruder %1%" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:55 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:466 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:543 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578 #: src/libslic3r/PrintConfig.cpp:4362 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:505 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:552 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:319 msgid "Apply" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:579 #: src/libslic3r/PrintConfig.cpp:4377 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:273 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:275 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52 msgid "Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:67 msgid "Mesh name" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:69 msgid "Detail level" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:70 msgid "Decimate ratio" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:113 msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommend to reduce amount of triangles." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:116 #: src/slic3r/GUI/GUI_Factories.cpp:705 msgid "Simplify model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:143 msgid "Simplify" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:156 msgid "Simplification is currently only allowed when a single part is selected" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:157 #: src/slic3r/GUI/MainFrame.cpp:1157 src/slic3r/GUI/MainFrame.cpp:1614 #: src/slic3r/GUI/PrintHostDialogs.cpp:371 msgid "Error" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:250 msgid "Extra high" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:251 msgid "High" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:252 msgid "Medium" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:253 msgid "Low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:254 msgid "Extra low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:304 #, possible-c-format msgid "%d triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:307 msgid "Show wireframe" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:313 msgid "Operation already cancelling. Please wait few seconds." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322 msgid "Can't apply when proccess preview." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:329 msgid "Process %1% / 100" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:479 msgid "Simplify %1%" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1227 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1230 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46 #: src/libslic3r/PrintConfig.cpp:3571 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:372 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:522 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:706 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:774 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:880 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:901 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:902 msgid "Save support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:962 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1055 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1135 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1136 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1142 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1190 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1201 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1226 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1229 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:196 msgid "" "ERROR: Please close all manipulators available from the left toolbar first" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:561 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:673 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1270 msgid "" "You are currently editing SLA support points. Please, apply or discard your " "changes first." msgstr "" #: src/slic3r/GUI/GUI.cpp:292 msgid "Undefined" msgstr "" #: src/slic3r/GUI/GUI.cpp:317 msgid "%1% was substituted with %2%" msgstr "" #: src/slic3r/GUI/GUI.cpp:326 msgid "" "Most likely the configuration was produced by a newer version of PrusaSlicer " "or by some PrusaSlicer fork." msgstr "" #: src/slic3r/GUI/GUI.cpp:327 msgid "The following values were substituted:" msgstr "" #: src/slic3r/GUI/GUI.cpp:328 msgid "Review the substitutions and adjust them if needed." msgstr "" #: src/slic3r/GUI/GUI.cpp:338 src/slic3r/GUI/Plater.cpp:816 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/GUI.cpp:342 src/slic3r/GUI/PhysicalPrinterDialog.cpp:157 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/GUI.cpp:355 msgid "" "Configuration bundle was loaded, however some configuration values were not " "recognized." msgstr "" #: src/slic3r/GUI/GUI.cpp:365 msgid "" "Configuration file \"%1%\" was loaded, however some configuration values " "were not recognized." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:266 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:267 msgid "Developed by Prusa Research." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:269 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:270 msgid "Artwork model by M Boyer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:411 msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " "(according to XDG Base Directory Specification) to \n" "%2%.\n" "\n" "This directory did not exist yet (maybe you run the new version for the " "first time).\n" "However, an old %1% configuration directory was detected in \n" "%3%.\n" "\n" "Consider moving the contents of the old directory to the new location in " "order to access your profiles, etc.\n" "Note that if you decide to downgrade %1% in future, it will use the old " "location again.\n" "\n" "What do you want to do now?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:419 #, possible-c-format msgid "%s - BREAKING CHANGE" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:421 msgid "Quit, I will move my data now" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:421 msgid "Start the application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:698 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:701 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:705 msgid "" "PrusaSlicer has encountered a localization error. Please report to " "PrusaSlicer team, what language was active and in which scenario this issue " "happened. Thank you.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:708 msgid "Critical error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:713 msgid "Internal error: %1%" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:899 src/slic3r/GUI/GUI_App.cpp:990 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:905 src/slic3r/GUI/GUI_App.cpp:996 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:946 #, possible-c-format msgid "" "PrusaSlicer detected another configuration folder at %s.\n" "Its version is %s.\n" "Last version you used in current configuration folder is %s.\n" "Please note that PrusaSlicer uses different folders to save configuration of " "alpha, beta and full release versions.\n" "Would you like to copy found configuration to your current configuration " "folder?\n" "\n" "If you select yes, PrusaSlicer will copy all profiles and other files from " "found folder to the current one. Overwriting any existing file with matching " "name.\n" "If you select no, you will continue with current configuration." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:955 #, possible-c-format msgid "" "PrusaSlicer detected another configuration folder at %s.\n" "Its version is %s.\n" "There is no configuration file in current configuration folder.\n" "Please note that PrusaSlicer uses different folders to save configuration of " "alpha, beta and full release versions.\n" "Would you like to copy found configuration to your current configuration " "folder?\n" "\n" "If you select yes, PrusaSlicer will copy all profiles and other files from " "found folder to the current one.\n" "If you select no, you will start with clean installation with configuration " "wizard." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:964 msgid "PrusaSlicer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1036 msgid "" "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n" "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM " "available in the system.\n" "Please download and install a 64 bit build of PrusaSlicer from https://www." "prusa3d.cz/prusaslicer/.\n" "Do you wish to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1083 #, possible-c-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1085 src/slic3r/GUI/GUI_App.cpp:2956 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:888 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1133 msgid "Loading configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1165 msgid "New release version %1% is available." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1166 msgid "See Download page." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1180 msgid "New prerelease version %1% is available." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1181 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1222 msgid "Preparing settings tabs" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1572 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1576 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" "Settings will be available in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1578 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1582 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1595 src/slic3r/GUI/GUI_App.cpp:1606 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1609 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1614 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1743 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1755 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1767 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1778 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1917 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1917 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2066 msgid "modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2120 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2124 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2124 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2125 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2125 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2126 msgid "Check for Configuration Updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2126 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2133 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2139 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2144 src/slic3r/GUI/wxExtensions.cpp:707 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2144 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2146 src/slic3r/GUI/wxExtensions.cpp:709 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2146 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2147 src/slic3r/GUI/wxExtensions.cpp:710 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2147 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2152 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2152 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2155 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2158 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2158 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2178 msgid "Taking a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2179 msgid "" "Some presets are modified and the unsaved changes will not be captured by " "the configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2180 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2196 msgid "Loading a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2205 msgid "Continue to activate a configuration snapshot %1%?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2219 msgid "Failed to activate configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2238 msgid "Restart application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2272 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2275 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2277 src/slic3r/GUI/Preferences.cpp:554 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2304 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2421 src/slic3r/GUI/GUI_App.cpp:2482 msgid "The preset modifications are successfully saved" msgid_plural "The presets modifications are successfully saved" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_App.cpp:2485 msgid "For new project all modifications will be reseted" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2523 msgid "Loading a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2526 msgid "Project is loading" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2526 msgid "Opening new project while some presets are unsaved." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2545 msgid "The uploads are still ongoing" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2545 msgid "Stop them and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2549 msgid "Ongoing uploads" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2755 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2756 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224 #: src/slic3r/GUI/Plater.cpp:2395 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2780 msgid "Configuration is editing from ConfigWizard" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2805 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2955 msgid "Open hyperlink in default browser?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2955 msgid "PrusaSlicer: Open hyperlink" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:57 src/slic3r/GUI/GUI_Init.cpp:60 msgid "PrusaSlicer GUI initialization failed" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:60 msgid "Fatal error, exception catched: %1%" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127 #: src/libslic3r/PrintConfig.cpp:261 src/libslic3r/PrintConfig.cpp:378 #: src/libslic3r/PrintConfig.cpp:421 src/libslic3r/PrintConfig.cpp:430 #: src/libslic3r/PrintConfig.cpp:682 src/libslic3r/PrintConfig.cpp:749 #: src/libslic3r/PrintConfig.cpp:757 src/libslic3r/PrintConfig.cpp:1200 #: src/libslic3r/PrintConfig.cpp:1286 src/libslic3r/PrintConfig.cpp:1505 #: src/libslic3r/PrintConfig.cpp:1897 src/libslic3r/PrintConfig.cpp:1964 #: src/libslic3r/PrintConfig.cpp:2198 src/libslic3r/PrintConfig.cpp:2782 #: src/libslic3r/PrintConfig.cpp:2790 src/libslic3r/PrintConfig.cpp:2850 #: src/libslic3r/PrintConfig.cpp:2859 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131 #: src/slic3r/GUI/GUI_Preview.cpp:249 src/slic3r/GUI/Tab.cpp:1533 #: src/slic3r/GUI/Tab.cpp:1535 src/libslic3r/ExtrusionEntity.cpp:328 #: src/libslic3r/ExtrusionEntity.cpp:360 src/libslic3r/PrintConfig.cpp:644 #: src/libslic3r/PrintConfig.cpp:2029 src/libslic3r/PrintConfig.cpp:2038 #: src/libslic3r/PrintConfig.cpp:2047 src/libslic3r/PrintConfig.cpp:2057 #: src/libslic3r/PrintConfig.cpp:2066 src/libslic3r/PrintConfig.cpp:2488 #: src/libslic3r/PrintConfig.cpp:2494 src/libslic3r/PrintConfig.cpp:2502 #: src/libslic3r/PrintConfig.cpp:2515 src/libslic3r/PrintConfig.cpp:2525 #: src/libslic3r/PrintConfig.cpp:2533 src/libslic3r/PrintConfig.cpp:2551 #: src/libslic3r/PrintConfig.cpp:2567 src/libslic3r/PrintConfig.cpp:2588 #: src/libslic3r/PrintConfig.cpp:2601 src/libslic3r/PrintConfig.cpp:2618 #: src/libslic3r/PrintConfig.cpp:2636 src/libslic3r/PrintConfig.cpp:2650 #: src/libslic3r/PrintConfig.cpp:2660 src/libslic3r/PrintConfig.cpp:2669 #: src/libslic3r/PrintConfig.cpp:2680 src/libslic3r/PrintConfig.cpp:2694 #: src/libslic3r/PrintConfig.cpp:2710 src/libslic3r/PrintConfig.cpp:2718 #: src/libslic3r/PrintConfig.cpp:2719 src/libslic3r/PrintConfig.cpp:2728 #: src/libslic3r/PrintConfig.cpp:2742 src/libslic3r/PrintConfig.cpp:2750 #: src/libslic3r/PrintConfig.cpp:2764 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135 #: src/libslic3r/PrintConfig.cpp:2986 src/libslic3r/PrintConfig.cpp:2994 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:65 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/GUI_Preview.cpp:245 #: src/slic3r/GUI/Tab.cpp:1499 src/libslic3r/ExtrusionEntity.cpp:324 #: src/libslic3r/ExtrusionEntity.cpp:352 src/libslic3r/PrintConfig.cpp:1521 #: src/libslic3r/PrintConfig.cpp:1527 src/libslic3r/PrintConfig.cpp:1541 #: src/libslic3r/PrintConfig.cpp:1551 src/libslic3r/PrintConfig.cpp:1559 #: src/libslic3r/PrintConfig.cpp:1561 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1250 #: src/libslic3r/PrintConfig.cpp:1251 src/libslic3r/PrintConfig.cpp:1266 #: src/libslic3r/PrintConfig.cpp:1276 msgid "Fuzzy Skin" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/GUI_Preview.cpp:220 #: src/slic3r/GUI/Tab.cpp:1567 src/libslic3r/PrintConfig.cpp:481 #: src/libslic3r/PrintConfig.cpp:737 src/libslic3r/PrintConfig.cpp:1293 #: src/libslic3r/PrintConfig.cpp:1478 src/libslic3r/PrintConfig.cpp:1560 #: src/libslic3r/PrintConfig.cpp:1954 src/libslic3r/PrintConfig.cpp:2286 #: src/libslic3r/PrintConfig.cpp:2339 src/libslic3r/PrintConfig.cpp:2835 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1606 #: src/slic3r/GUI/Tab.cpp:2242 src/libslic3r/PrintConfig.cpp:767 #: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1931 #: src/libslic3r/PrintConfig.cpp:2307 src/libslic3r/PrintConfig.cpp:2580 #: src/libslic3r/PrintConfig.cpp:2608 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:725 #: src/libslic3r/PrintConfig.cpp:835 src/libslic3r/PrintConfig.cpp:1186 #: src/libslic3r/PrintConfig.cpp:1439 src/libslic3r/PrintConfig.cpp:1940 #: src/libslic3r/PrintConfig.cpp:2327 src/libslic3r/PrintConfig.cpp:2589 #: src/libslic3r/PrintConfig.cpp:2822 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1519 #: src/libslic3r/PrintConfig.cpp:491 src/libslic3r/PrintConfig.cpp:502 #: src/libslic3r/PrintConfig.cpp:518 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1478 #: src/slic3r/GUI/Tab.cpp:1511 src/slic3r/GUI/Tab.cpp:1628 #: src/slic3r/GUI/Tab.cpp:1632 src/slic3r/GUI/Tab.cpp:1969 #: src/slic3r/GUI/Tab.cpp:2336 src/slic3r/GUI/Tab.cpp:4360 #: src/libslic3r/PrintConfig.cpp:244 src/libslic3r/PrintConfig.cpp:469 #: src/libslic3r/PrintConfig.cpp:1380 src/libslic3r/PrintConfig.cpp:1467 #: src/libslic3r/PrintConfig.cpp:1514 src/libslic3r/PrintConfig.cpp:2464 #: src/libslic3r/PrintConfig.cpp:2474 src/libslic3r/PrintConfig.cpp:3010 #: src/libslic3r/PrintConfig.cpp:3206 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:425 #: src/slic3r/GUI/Tab.cpp:4294 src/slic3r/GUI/Tab.cpp:4295 #: src/libslic3r/PrintConfig.cpp:3400 src/libslic3r/PrintConfig.cpp:3407 #: src/libslic3r/PrintConfig.cpp:3416 src/libslic3r/PrintConfig.cpp:3425 #: src/libslic3r/PrintConfig.cpp:3435 src/libslic3r/PrintConfig.cpp:3445 #: src/libslic3r/PrintConfig.cpp:3482 src/libslic3r/PrintConfig.cpp:3489 #: src/libslic3r/PrintConfig.cpp:3500 src/libslic3r/PrintConfig.cpp:3510 #: src/libslic3r/PrintConfig.cpp:3519 src/libslic3r/PrintConfig.cpp:3532 #: src/libslic3r/PrintConfig.cpp:3542 src/libslic3r/PrintConfig.cpp:3551 #: src/libslic3r/PrintConfig.cpp:3561 src/libslic3r/PrintConfig.cpp:3572 #: src/libslic3r/PrintConfig.cpp:3580 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:571 #: src/slic3r/GUI/Tab.cpp:4335 src/slic3r/GUI/Tab.cpp:4336 #: src/slic3r/GUI/Tab.cpp:4408 src/libslic3r/PrintConfig.cpp:3588 #: src/libslic3r/PrintConfig.cpp:3595 src/libslic3r/PrintConfig.cpp:3609 #: src/libslic3r/PrintConfig.cpp:3620 src/libslic3r/PrintConfig.cpp:3630 #: src/libslic3r/PrintConfig.cpp:3652 src/libslic3r/PrintConfig.cpp:3663 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3677 #: src/libslic3r/PrintConfig.cpp:3688 src/libslic3r/PrintConfig.cpp:3697 #: src/libslic3r/PrintConfig.cpp:3706 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4353 #: src/slic3r/GUI/Tab.cpp:4354 src/libslic3r/SLA/Hollowing.cpp:72 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3716 #: src/libslic3r/PrintConfig.cpp:3723 src/libslic3r/PrintConfig.cpp:3733 #: src/libslic3r/PrintConfig.cpp:3742 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:160 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:161 msgid "Add negative volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:162 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:163 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:164 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:300 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:407 src/slic3r/GUI/GUI_Factories.cpp:412 #: src/slic3r/GUI/GUI_Factories.cpp:556 src/slic3r/GUI/GUI_Factories.cpp:562 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:444 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:456 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 src/slic3r/GUI/GUI_Factories.cpp:501 #: src/slic3r/GUI/GUI_Factories.cpp:505 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:471 msgid "Gallery" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:488 src/slic3r/GUI/GUI_Factories.cpp:526 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:535 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:626 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:636 src/slic3r/GUI/GUI_Factories.cpp:648 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:648 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:658 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:686 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:696 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:715 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:726 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3475 msgid "Replace with STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:733 msgid "Replace the selected volume with new STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:740 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:778 src/slic3r/Utils/Repetier.cpp:126 #: src/slic3r/Utils/Repetier.cpp:209 src/libslic3r/PrintConfig.cpp:609 #: src/libslic3r/PrintConfig.cpp:2702 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:796 src/slic3r/GUI/GUI_Factories.cpp:800 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:796 src/slic3r/GUI/GUI_Factories.cpp:800 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:840 src/slic3r/GUI/Plater.cpp:5544 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:841 src/slic3r/GUI/Plater.cpp:5545 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:842 src/slic3r/GUI/Plater.cpp:5546 msgid "Convert from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:843 src/slic3r/GUI/Plater.cpp:5546 msgid "Revert conversion from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:864 src/slic3r/GUI/GUI_ObjectList.cpp:2127 #: src/libslic3r/PrintConfig.cpp:4353 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:864 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:883 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:883 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:885 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:885 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:887 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:887 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:890 msgid "Mirror" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:890 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:906 src/slic3r/GUI/GUI_ObjectList.cpp:1690 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:942 msgid "To objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:942 src/slic3r/GUI/GUI_Factories.cpp:959 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:945 msgid "To parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:945 src/slic3r/GUI/GUI_Factories.cpp:980 msgid "Split the selected object into individual parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:949 src/slic3r/GUI/GUI_Factories.cpp:959 #: src/slic3r/GUI/GUI_Factories.cpp:980 src/libslic3r/PrintConfig.cpp:4382 msgid "Split" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:949 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1089 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1092 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1095 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1095 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1099 msgid "Fill bed with instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1099 msgid "Fill the remaining area of bed with instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:160 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:164 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:297 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:139 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:479 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:399 msgid "No errors detected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:408 #, possible-c-format msgid "Auto-repaired %1$d error" msgid_plural "Auto-repaired %1$d errors" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:414 #, possible-c-format msgid "%1$d degenerate facet" msgid_plural "%1$d degenerate facets" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:416 #, possible-c-format msgid "%1$d edge fixed" msgid_plural "%1$d edges fixed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:418 #, possible-c-format msgid "%1$d facet removed" msgid_plural "%1$d facets removed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:420 #, possible-c-format msgid "%1$d facet reversed" msgid_plural "%1$d facets reversed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:422 #, possible-c-format msgid "%1$d backward edge" msgid_plural "%1$d backward edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:425 src/slic3r/GUI/GUI_ObjectList.cpp:428 #, possible-c-format msgid "%1$d open edge" msgid_plural "%1$d open edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:427 msgid "Remaning errors" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:435 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:481 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:483 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:487 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:489 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:615 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:630 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:630 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1241 #: src/slic3r/GUI/GUI_ObjectList.cpp:3991 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1247 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1247 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1297 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1298 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1299 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1338 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1339 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1340 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1411 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1411 msgid "Load Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1509 src/slic3r/GUI/Plater.cpp:2347 msgid "Loading" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2367 msgid "Loading file" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1548 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1632 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1657 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1721 msgid "Add Shape from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1721 msgid "Add Shapes from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1824 msgid "Remove paint-on supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1831 msgid "Remove paint-on seam" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1838 msgid "Remove Multi Material painting" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1844 msgid "Shift objects to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1850 msgid "Remove variable layer height" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1871 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1895 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1911 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1943 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1947 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1970 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1974 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1998 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2002 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2134 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2222 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2254 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2423 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2438 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2471 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2475 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2480 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2486 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2492 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2499 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2499 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2735 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2928 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3004 #: src/slic3r/GUI/GUI_ObjectList.cpp:3032 #: src/slic3r/GUI/GUI_ObjectList.cpp:3052 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3098 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3102 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3107 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3166 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3485 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3497 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3634 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3635 #: src/slic3r/GUI/GUI_ObjectList.cpp:3774 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3635 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3637 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3638 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3639 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3642 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3647 #: src/slic3r/GUI/GUI_ObjectList.cpp:3722 src/slic3r/GUI/Plater.cpp:182 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3769 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3774 msgid "Negative Volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3774 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3774 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3774 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3775 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4013 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4013 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4076 msgid "Repairing model" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4105 msgid "Fix through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4108 msgid "Fixing through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4138 msgid "The following model was repaired successfully" msgid_plural "The following models were repaired successfully" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4144 msgid "Folowing model repair failed" msgid_plural "Folowing models repair failed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4149 msgid "Repairing was canceled" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4261 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4401 msgid "Set Printable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4401 msgid "Set Unprintable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4403 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4403 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4404 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4404 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:55 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:56 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:85 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:141 src/libslic3r/GCode.cpp:525 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:521 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522 #: src/slic3r/GUI/Mouse3DController.cpp:478 #: src/slic3r/GUI/Mouse3DController.cpp:499 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:250 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:336 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:348 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:398 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:400 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414 msgid "Inches" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:523 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:577 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:820 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:852 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:931 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:980 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:983 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:63 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:99 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:105 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:158 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:211 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:218 src/libslic3r/PrintConfig.cpp:779 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:219 src/libslic3r/PrintConfig.cpp:2964 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/Tab.cpp:1954 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:222 src/slic3r/GUI/Tab.cpp:1929 msgid "Temperature" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:223 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:228 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:254 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:318 #: src/libslic3r/ExtrusionEntity.cpp:340 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:319 #: src/libslic3r/ExtrusionEntity.cpp:342 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:320 #: src/libslic3r/ExtrusionEntity.cpp:344 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:321 #: src/libslic3r/ExtrusionEntity.cpp:346 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:322 #: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:2326 #: src/libslic3r/PrintConfig.cpp:2338 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:323 #: src/libslic3r/ExtrusionEntity.cpp:350 src/libslic3r/PrintConfig.cpp:2821 #: src/libslic3r/PrintConfig.cpp:2834 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:325 #: src/libslic3r/ExtrusionEntity.cpp:354 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:326 #: src/libslic3r/ExtrusionEntity.cpp:356 src/libslic3r/PrintConfig.cpp:1292 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:248 src/libslic3r/ExtrusionEntity.cpp:327 #: src/libslic3r/ExtrusionEntity.cpp:358 msgid "Skirt/Brim" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:250 src/libslic3r/ExtrusionEntity.cpp:329 #: src/libslic3r/ExtrusionEntity.cpp:362 src/libslic3r/PrintConfig.cpp:2668 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:251 src/slic3r/GUI/Tab.cpp:1617 #: src/libslic3r/ExtrusionEntity.cpp:330 src/libslic3r/ExtrusionEntity.cpp:364 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:728 msgid "NOTE:" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:729 msgid "Sliced object \"%1%\" looks like a logo or a sign" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:730 msgid "Apply color change automatically" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1057 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1058 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1059 msgid "Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:762 #: src/slic3r/GUI/HintNotification.cpp:788 #: src/slic3r/GUI/NotificationManager.cpp:405 #: src/slic3r/GUI/NotificationManager.cpp:422 msgid "More" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:903 msgid "Open Preferences." msgstr "" #: src/slic3r/GUI/HintNotification.cpp:995 msgid "Open Documentation in web browser." msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:526 msgid "Edit" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:979 src/slic3r/GUI/Search.cpp:479 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:980 src/slic3r/GUI/Search.cpp:472 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:982 src/slic3r/GUI/Search.cpp:474 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:171 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:180 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:205 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:250 #, possible-c-format msgid "" "Arrangement ignored the following objects which can't fit into a single " "bed:\n" "%s" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:123 msgid "Filling bed" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:134 msgid "Bed filling canceled." msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:135 msgid "Bed filling done." msgstr "" #: src/slic3r/GUI/Jobs/Job.cpp:111 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Jobs/PlaterJob.cpp:13 msgid "An unexpected error occured" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:59 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:77 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:78 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:36 msgid "Choose SLA archive:" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:40 msgid "Import file" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47 msgid "Import model and profile" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48 msgid "Import profile only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49 msgid "Import model only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60 msgid "Accurate" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61 msgid "Balanced" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:62 msgid "Quick" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:140 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:158 msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:164 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:165 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2394 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2396 msgid "Attention!" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1095 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:77 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:78 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:79 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:80 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:81 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:83 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:84 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:85 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:909 #: src/slic3r/GUI/Plater.cpp:6446 src/libslic3r/PrintConfig.cpp:4253 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6447 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:89 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:90 src/slic3r/GUI/Plater.cpp:892 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:91 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:93 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:94 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:95 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:99 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:100 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:102 #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:110 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 #: src/slic3r/GUI/PrintHostDialogs.cpp:215 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/MainFrame.cpp:75 #: src/slic3r/GUI/MainFrame.cpp:1408 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:47 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 #: src/slic3r/GUI/KBShortcutsDialog.cpp:248 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Gizmo FDM paint-on supports" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Gizmo FDM paint-on seam" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Gizmo Multi Material painting" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Minimize application" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:181 src/slic3r/GUI/MainFrame.cpp:284 #: src/slic3r/GUI/MainFrame.cpp:328 src/slic3r/GUI/MainFrame.cpp:440 #: src/slic3r/GUI/MainFrame.cpp:443 src/slic3r/GUI/MainFrame.cpp:465 #: src/slic3r/GUI/MainFrame.cpp:468 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:184 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "Gizmo move: Press to snap by 1mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:186 msgid "Gizmo scale: Press to snap by 5%" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Gizmo scale: Scale selection to fit print volume" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:188 msgid "Gizmo scale: Press to activate one direction scaling" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:189 msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "" "The following shortcuts are applicable when the specified gizmo is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 msgid "Set selected items as Printable/Unprintable" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 msgid "Set default extruder for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 msgid "Set extruder number for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:201 msgid "Objects List" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 src/slic3r/GUI/MainFrame.cpp:1513 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 src/slic3r/GUI/MainFrame.cpp:1347 #: src/slic3r/GUI/MainFrame.cpp:1351 src/slic3r/GUI/MainFrame.cpp:1518 #: src/slic3r/GUI/MainFrame.cpp:1522 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 msgid "Vertical slider - Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Vertical slider - Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 msgid "Horizontal slider - Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 msgid "Horizontal slider - Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 msgid "On/Off one layer mode of the vertical slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 msgid "Show/Hide Legend and Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Show/Hide G-code window" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4383 #: src/slic3r/GUI/Tab.cpp:2764 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 msgid "Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 msgid "Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 msgid "Set upper thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 msgid "Set lower thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:238 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 #: src/slic3r/GUI/KBShortcutsDialog.cpp:240 #: src/slic3r/GUI/KBShortcutsDialog.cpp:250 #: src/slic3r/GUI/KBShortcutsDialog.cpp:251 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Vertical Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "" "The following shortcuts are applicable in G-code preview when the vertical " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:248 msgid "Set left thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "Set right thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "Horizontal Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:278 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:75 src/slic3r/GUI/MainFrame.cpp:89 #: src/slic3r/GUI/MainFrame.cpp:1408 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:91 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:1296 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:89 src/slic3r/GUI/MainFrame.cpp:1529 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:91 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:225 msgid "Closing PrusaSlicer. Current project is modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:232 msgid "PrusaSlicer is closing" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:232 msgid "Closing PrusaSlicer while some presets are modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:330 #: src/slic3r/GUI/Tab.hpp:376 src/slic3r/GUI/Tab.hpp:493 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:334 #: src/slic3r/GUI/MainFrame.cpp:2091 src/slic3r/GUI/MainFrame.cpp:2092 #: src/slic3r/GUI/Tab.hpp:478 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:332 #: src/slic3r/GUI/MainFrame.cpp:2091 src/slic3r/GUI/MainFrame.cpp:2092 #: src/slic3r/GUI/Tab.hpp:405 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:336 #: src/slic3r/GUI/Tab.hpp:446 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:627 src/slic3r/GUI/Plater.cpp:1713 #: src/slic3r/GUI/Plater.cpp:2785 msgid "Untitled" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:650 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1065 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1065 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1067 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1067 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1073 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1074 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1080 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1080 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1082 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1082 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1084 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1084 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1087 src/slic3r/GUI/MainFrame.cpp:1090 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1087 src/slic3r/GUI/MainFrame.cpp:1090 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1092 msgid "Show Tip of the day" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1092 msgid "" "Opens Tip of the day notification in bottom right corner or shows another " "tip if already opened." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1095 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1109 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1109 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1113 src/libslic3r/PrintConfig.cpp:2849 #: src/libslic3r/PrintConfig.cpp:2858 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1113 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1116 src/libslic3r/PrintConfig.cpp:420 #: src/libslic3r/PrintConfig.cpp:429 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1116 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1118 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1118 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1120 src/libslic3r/PrintConfig.cpp:2208 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1120 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1122 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1122 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1124 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1124 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1140 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1140 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1145 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1157 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1182 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1182 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1186 src/slic3r/GUI/MainFrame.cpp:1188 msgid "Save project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1186 src/slic3r/GUI/MainFrame.cpp:1188 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1196 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1196 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1200 msgid "Import STL (imperial units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1200 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1204 msgid "Import SL1 / SL1S archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1204 msgid "Load an SL1 / Sl1S archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1209 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1209 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1212 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1212 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1216 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1216 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1219 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1222 src/slic3r/GUI/MainFrame.cpp:1574 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1222 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1226 src/slic3r/GUI/MainFrame.cpp:1575 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1226 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1230 msgid "Export G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1230 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1234 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1234 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1237 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1237 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1245 src/slic3r/GUI/MainFrame.cpp:1526 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1245 src/slic3r/GUI/MainFrame.cpp:1526 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1249 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1249 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1252 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1252 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1255 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1255 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1258 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1260 msgid "Ejec&t SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1260 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1268 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1268 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1274 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1274 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1280 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1280 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1288 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1288 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1292 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1292 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1296 msgid "&G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1299 src/slic3r/GUI/MainFrame.cpp:1533 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1299 src/slic3r/GUI/MainFrame.cpp:1533 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1314 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1315 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1317 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1318 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1321 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1322 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1324 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1325 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1329 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1332 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1337 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1338 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1340 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1341 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1346 src/slic3r/GUI/MainFrame.cpp:1350 #: src/slic3r/GUI/MainFrame.cpp:1517 src/slic3r/GUI/MainFrame.cpp:1521 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1356 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1357 msgid "Search in settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1365 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1365 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1370 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1370 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1373 src/slic3r/GUI/MainFrame.cpp:1577 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1373 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1377 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1377 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1383 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1383 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1386 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1386 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1392 msgid "Open the dialog to modify shape gallery" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1404 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1404 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1412 msgid "Compare presets" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1422 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1422 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1425 msgid "&Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1425 src/slic3r/GUI/Plater.cpp:2287 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1430 msgid "&Full screen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1430 msgid "Full screen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1445 src/slic3r/GUI/MainFrame.cpp:1548 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1446 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1447 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1448 src/slic3r/GUI/MainFrame.cpp:1549 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1451 src/slic3r/GUI/MainFrame.cpp:1552 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1513 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1529 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1574 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1575 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1577 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1601 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1613 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1620 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1620 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1621 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1656 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1656 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1656 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1668 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1677 src/slic3r/GUI/Plater.cpp:3266 #: src/slic3r/GUI/Plater.cpp:5956 src/slic3r/GUI/Tab.cpp:1649 #: src/slic3r/GUI/Tab.cpp:4361 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1679 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1702 msgid "%1% was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1705 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1721 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1731 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1742 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1742 src/libslic3r/PrintConfig.cpp:4358 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1756 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1773 msgid "Loading of a configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1775 src/slic3r/GUI/MainFrame.cpp:1840 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1804 msgid "Exporting configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1805 msgid "" "Some presets are modified and the unsaved changes will not be exported into " "configuration bundle." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1814 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1837 msgid "Loading of a configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1867 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:453 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:464 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:469 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:472 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:484 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:490 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:505 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:508 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:171 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:172 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:191 #, possible-c-format msgid "%s warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:192 #, possible-c-format msgid "%s has a warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:205 src/slic3r/GUI/MsgDialog.cpp:218 #, possible-c-format msgid "%s info" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:246 #, possible-c-format msgid "%s information" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:37 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:38 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:38 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:46 msgid "" "You have just added a G-code for color change, but its value is empty.\n" "To export the G-code correctly, check the \"Color Change G-code\" in " "\"Printer Settings > Custom G-code\"" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:49 msgid "" "No color change event was added to the print. The print does not look like a " "sign." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:51 msgid "Desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:53 msgid "Desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:55 msgid "Undo desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:57 msgid "Undo desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:58 msgid "Exporting." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:694 msgid "Open Folder." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:731 msgid "Eject drive" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:913 msgid "ERROR" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:918 msgid "CANCELED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:923 msgid "COMPLETED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:965 msgid "Cancel upload" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1024 #, possible-c-format msgid "%1$d Object was loaded with custom supports." msgid_plural "%1$d Objects were loaded with custom supports." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1025 #, possible-c-format msgid "%1$d Object was loaded with custom seam." msgid_plural "%1$d Objects were loaded with custom seam." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1026 #, possible-c-format msgid "%1$d Object was loaded with multimaterial painting." msgid_plural "%1$d Objects were loaded with multimaterial painting." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1027 #, possible-c-format msgid "%1$d Object was loaded with variable layer height." msgid_plural "%1$d Objects were loaded with variable layer height." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1028 #, possible-c-format msgid "%1$d Object was loaded with partial sinking." msgid_plural "%1$d Objects were loaded with partial sinking." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1141 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1141 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1141 msgid "Export." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1475 #: src/slic3r/GUI/NotificationManager.cpp:1482 #: src/slic3r/GUI/NotificationManager.cpp:1498 #: src/slic3r/GUI/NotificationManager.cpp:1504 #: src/slic3r/GUI/NotificationManager.cpp:1575 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1487 #: src/slic3r/GUI/NotificationManager.cpp:1514 #: src/slic3r/GUI/NotificationManager.cpp:1522 #: src/slic3r/GUI/NotificationManager.cpp:1533 src/slic3r/GUI/Plater.cpp:3134 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1626 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:50 msgid "Paint-on seam" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:52 msgid "Sinking" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:94 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:98 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4198 #: src/slic3r/GUI/Tab.cpp:4290 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:134 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:257 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:260 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:263 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw-renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:273 #, possible-c-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:274 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:347 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:347 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:83 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Descriptive name for the printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2193 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:268 msgid "Connection to printers connected via the print host failed." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:310 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:315 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337 msgid "Refresh Printers" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:374 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:404 #: src/libslic3r/PrintConfig.cpp:304 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:405 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:406 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:630 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:634 msgid "You should change the name of your printer device." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:642 msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:643 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:670 msgid "" "Following printer preset is duplicated:%1%The above preset for printer \"%2%" "\" will be used just once." msgid_plural "" "Following printer presets are duplicated:%1%The above presets for printer " "\"%2%\" will be used just once." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:720 msgid "It's not possible to delete the last related preset for the printer." msgstr "" #: src/slic3r/GUI/Plater.cpp:141 src/slic3r/GUI/SavePresetDialog.cpp:101 #: src/slic3r/GUI/SavePresetDialog.cpp:109 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/Plater.cpp:142 src/slic3r/GUI/SavePresetDialog.cpp:102 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/Plater.cpp:208 msgid "" "For a multipart object, this value isn't accurate.\n" "It doesn't take account of intersections and negative volumes." msgstr "" #: src/slic3r/GUI/Plater.cpp:212 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:214 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:273 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:293 src/slic3r/GUI/Plater.cpp:1349 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:294 src/slic3r/GUI/Plater.cpp:1361 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:295 src/slic3r/GUI/Plater.cpp:1368 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:296 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:297 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:298 src/slic3r/GUI/Plater.cpp:1331 #: src/slic3r/GUI/Plater.cpp:1418 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:299 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:428 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:430 src/libslic3r/PrintConfig.cpp:2524 #: src/libslic3r/PrintConfig.cpp:3481 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:431 src/slic3r/GUI/Plater.cpp:560 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:432 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:464 src/slic3r/GUI/Tab.cpp:1528 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:466 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:474 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:574 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:576 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:577 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:890 src/slic3r/GUI/Plater.cpp:6447 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:910 src/slic3r/GUI/Plater.cpp:3266 #: src/slic3r/GUI/Plater.cpp:5959 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:1083 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1278 msgid "%1% (%2$d shell)" msgid_plural "%1% (%2$d shells)" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1306 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1309 msgid "object" msgid_plural "objects" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1309 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1349 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1351 src/slic3r/GUI/Plater.cpp:1404 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1351 src/slic3r/GUI/Plater.cpp:1404 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1361 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1387 msgid "Filament at extruder %1%" msgstr "" #: src/slic3r/GUI/Plater.cpp:1393 msgid "(including spool)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1402 src/libslic3r/PrintConfig.cpp:1042 #: src/libslic3r/PrintConfig.cpp:3275 src/libslic3r/PrintConfig.cpp:3276 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1420 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1427 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1664 msgid "Fill bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:1670 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:1676 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:1715 msgid "Do you want to save the changes to \"%1%\"?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2166 #, possible-c-format msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2171 #, possible-c-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2190 src/slic3r/GUI/Plater.cpp:5013 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2286 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2454 msgid "" "The preset below was temporarily installed on the active instance of " "PrusaSlicer" msgid_plural "" "The presets below were temporarily installed on the active instance of " "PrusaSlicer" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2484 msgid "Failed loading file \"%1%\" due to an invalid configuration." msgstr "" #: src/slic3r/GUI/Plater.cpp:2504 #, possible-c-format msgid "" "Object size from file %s appears to be zero.\n" "This object has been removed from the model" msgid_plural "" "Objects size from file %s appears to be zero.\n" "These objects have been removed from the model" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2508 msgid "The size of the object is zero" msgstr "" #: src/slic3r/GUI/Plater.cpp:2521 #, possible-c-format msgid "" "The dimensions of the object from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2525 src/slic3r/GUI/Plater.cpp:2547 msgid "The object is too small" msgstr "" #: src/slic3r/GUI/Plater.cpp:2526 src/slic3r/GUI/Plater.cpp:2548 msgid "Apply to all the remaining small objects being loaded." msgstr "" #: src/slic3r/GUI/Plater.cpp:2543 #, possible-c-format msgid "" "The dimensions of the object from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2561 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2564 src/slic3r/GUI/Plater.cpp:2619 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2572 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2573 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2593 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2616 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2735 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2736 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2813 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2820 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2826 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2832 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2930 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2942 msgid "Delete All Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2970 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:3053 msgid "" "The selected object couldn't be split because it contains only one solid " "part." msgstr "" #: src/slic3r/GUI/Plater.cpp:3060 msgid "All non-solid parts (modifiers) were deleted" msgstr "" #: src/slic3r/GUI/Plater.cpp:3062 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3116 msgid "" "An object has custom support enforcers which will not be used because " "supports are disabled." msgstr "" #: src/slic3r/GUI/Plater.cpp:3118 msgid "Enable supports for enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:3247 src/slic3r/GUI/Plater.cpp:4079 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:3317 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3375 msgid "Replace from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3391 msgid "Unable to replace with more than one volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:3391 src/slic3r/GUI/Plater.cpp:3470 msgid "Error during replace" msgstr "" #: src/slic3r/GUI/Plater.cpp:3462 msgid "Select the new file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3470 msgid "File for the replace wasn't selected" msgstr "" #: src/slic3r/GUI/Plater.cpp:3561 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3592 src/slic3r/GUI/Plater.cpp:5141 msgid "The selected file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3593 msgid "differs from the original file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3593 msgid "Do you want to replace it" msgstr "" #: src/slic3r/GUI/Plater.cpp:3615 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3715 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3720 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3738 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:4033 msgid "There are active warnings concerning sliced models:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4044 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:4375 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4798 msgid "Undo / Redo is processing" msgstr "" #: src/slic3r/GUI/Plater.cpp:4800 msgid "" "Switching the printer technology from %1% to %2%.\n" "Some %1% presets were modified, which will be lost after switching the " "printer technology." msgstr "" #: src/slic3r/GUI/Plater.cpp:4997 msgid "Creating a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:5000 msgid "Creating a new project while some presets are modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:5001 msgid "You can keep presets modifications to the new project or discard them" msgstr "" #: src/slic3r/GUI/Plater.cpp:5002 msgid "" "You can keep presets modifications to the new project, discard them or save " "changes as new presets.\n" "Note, if changes will be saved then new project wouldn't keep them" msgstr "" #: src/slic3r/GUI/Plater.cpp:5008 msgid "Creating a new project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5039 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5065 src/slic3r/GUI/Plater.cpp:5325 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5069 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5141 msgid "does not contain valid gcode." msgstr "" #: src/slic3r/GUI/Plater.cpp:5142 msgid "Error while loading .gcode file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5195 #, possible-c-format msgid "%s - Drop project file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5202 msgid "Open as project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5203 msgid "Import geometry only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5204 msgid "Import config only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5207 msgid "Select an action to apply to the file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5212 msgid "Action" msgstr "" #: src/slic3r/GUI/Plater.cpp:5228 msgid "Don't show again" msgstr "" #: src/slic3r/GUI/Plater.cpp:5269 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:5270 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5347 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:5352 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:5402 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5413 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5422 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5456 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5507 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5508 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5512 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:5586 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:5646 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5646 msgid "Save SL1 / SL1S file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5849 msgid "" "The plater is empty.\n" "Do you want to save the project?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5849 msgid "Save project" msgstr "" #: src/slic3r/GUI/Plater.cpp:6446 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:6480 msgid "" "Custom supports, seams and multimaterial painting were removed after " "repairing the mesh." msgstr "" #: src/slic3r/GUI/Plater.cpp:6594 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:107 src/slic3r/GUI/Tab.cpp:2228 #: src/slic3r/GUI/Tab.cpp:2451 src/slic3r/GUI/Tab.cpp:2558 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:120 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:122 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:128 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:130 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:136 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:138 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:147 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:149 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:158 msgid "If enabled, sets PrusaSlicer as default application to open .3mf files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:165 msgid "If enabled, sets PrusaSlicer as default application to open .stl files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:176 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:181 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:183 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:189 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:191 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:199 msgid "Show drop project dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:201 msgid "" "When checked, whenever dragging and dropping a project file on the " "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" #: src/slic3r/GUI/Preferences.cpp:207 src/slic3r/GUI/Preferences.cpp:211 msgid "Allow just a single PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/Preferences.cpp:209 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:213 msgid "" "If this is enabled, when starting PrusaSlicer and another instance of the " "same PrusaSlicer is already running, that instance will be reactivated " "instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:221 msgid "" "Ask to save unsaved changes when closing the application or when loading a " "new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:223 msgid "" "Always ask for unsaved changes, when: \n" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" #: src/slic3r/GUI/Preferences.cpp:230 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:895 msgid "Ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:232 msgid "" "Always ask for unsaved changes when selecting new preset or resetting a " "preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:237 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:894 msgid "Ask for unsaved changes when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:239 msgid "Always ask for unsaved changes when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:246 msgid "Associate .gcode files to PrusaSlicer G-code Viewer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:248 msgid "" "If enabled, sets PrusaSlicer G-code Viewer as default application to open ." "gcode files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:256 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:258 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:268 src/slic3r/GUI/Preferences.cpp:270 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:276 msgid "Clear Undo / Redo stack on new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:278 msgid "" "Clear Undo / Redo stack on new project or when an existing project is loaded." msgstr "" #: src/slic3r/GUI/Preferences.cpp:284 msgid "Enable support for legacy 3DConnexion devices" msgstr "" #: src/slic3r/GUI/Preferences.cpp:286 msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" #: src/slic3r/GUI/Preferences.cpp:295 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:300 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:302 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:307 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:309 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:314 msgid "Reverse direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:316 msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:324 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:347 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:349 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer.If disabled, changes made using the sequential slider, in " "preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:356 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:358 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:363 msgid "Suppress to open hyperlink in browser" msgstr "" #: src/slic3r/GUI/Preferences.cpp:365 msgid "" "If enabled, the descriptions of configuration parameters in settings tabs " "wouldn't work as hyperlinks. If disabled, the descriptions of configuration " "parameters in settings tabs will work as hyperlinks." msgstr "" #: src/slic3r/GUI/Preferences.cpp:371 msgid "Use colors for axes values in Manipulation panel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:373 msgid "" "If enabled, the axes names and axes values will be colorized according to " "the axes colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:379 msgid "Order object volumes by types" msgstr "" #: src/slic3r/GUI/Preferences.cpp:381 msgid "" "If enabled, volumes will be always ordered inside the object. Correct order " "is Model Part, Negative Volume, Modifier, Support Blocker and Support " "Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " "Modifiers. But one of the model parts have to be on the first place." msgstr "" #: src/slic3r/GUI/Preferences.cpp:388 msgid "Set settings tabs as menu items (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:390 msgid "" "If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " "will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:399 msgid "Show \"Tip of the day\" notification after start" msgstr "" #: src/slic3r/GUI/Preferences.cpp:401 msgid "If enabled, useful hints are displayed at startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:407 msgid "Notify about new releases" msgstr "" #: src/slic3r/GUI/Preferences.cpp:409 msgid "" "You will be notified about new release after startup acordingly: All = " "Regular release and alpha / beta releases. Release only = regular release." msgstr "" #: src/slic3r/GUI/Preferences.cpp:415 msgid "Release only" msgstr "" #: src/slic3r/GUI/Preferences.cpp:424 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:426 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:451 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:456 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:458 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:471 msgid "Dark mode (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:476 msgid "Enable dark mode" msgstr "" #: src/slic3r/GUI/Preferences.cpp:478 msgid "" "If enabled, UI will use Dark mode colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:487 msgid "Use system menu for application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:489 msgid "" "If enabled, application will use the standart Windows system menu,\n" "but on some combination of display scales it can looks ugly. If disabled, " "old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:550 msgid "Changes for the critical options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:552 msgid "" "Changing some options will trigger application restart.\n" "You will lose the content of the plater." msgstr "" #: src/slic3r/GUI/Preferences.cpp:660 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:675 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:709 src/slic3r/GUI/Preferences.cpp:720 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:710 msgid "New layout, access via settings button in the top menu" msgstr "" #: src/slic3r/GUI/Preferences.cpp:711 src/slic3r/GUI/Preferences.cpp:721 msgid "Settings in non-modal window" msgstr "" #: src/slic3r/GUI/Preferences.cpp:729 msgid "Layout Options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:772 msgid "Text colors" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:249 #: src/slic3r/GUI/PresetComboBoxes.cpp:287 #: src/slic3r/GUI/PresetComboBoxes.cpp:794 #: src/slic3r/GUI/PresetComboBoxes.cpp:849 #: src/slic3r/GUI/PresetComboBoxes.cpp:989 #: src/slic3r/GUI/PresetComboBoxes.cpp:1033 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:291 #: src/slic3r/GUI/PresetComboBoxes.cpp:853 #: src/slic3r/GUI/PresetComboBoxes.cpp:1037 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:302 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:337 msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:340 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:581 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:697 #: src/slic3r/GUI/PresetComboBoxes.cpp:737 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:702 #: src/slic3r/GUI/PresetComboBoxes.cpp:742 src/slic3r/GUI/Tab.cpp:3179 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:716 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:722 msgid "Change extruder color" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:730 src/slic3r/GUI/Tab.cpp:3179 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:733 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:864 #: src/slic3r/GUI/PresetComboBoxes.cpp:1051 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:888 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:890 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:892 #: src/slic3r/GUI/PresetComboBoxes.cpp:1075 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:32 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:40 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:44 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at " "%2%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:55 msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:57 msgid "During the other layers, fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:57 msgid "Fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:59 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:61 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:64 msgid "During the other layers, fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:64 msgid "Fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:170 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:171 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:174 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:176 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:178 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:181 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:183 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:188 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:192 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:193 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:197 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:215 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:221 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:236 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:240 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:269 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:282 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:285 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:288 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:301 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:304 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:307 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:40 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:40 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:50 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:59 msgid "Group" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:83 #, possible-c-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:91 msgid "Upload and Print" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:101 msgid "Upload and Simulate" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:113 msgid "Upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:245 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:246 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:247 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:248 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:249 msgctxt "OfFile" msgid "Size" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:250 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:251 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:254 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:256 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:314 #: src/slic3r/GUI/PrintHostDialogs.cpp:369 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:370 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:372 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:373 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:374 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:422 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:29 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:114 #: src/libslic3r/PrintConfig.cpp:926 src/libslic3r/PrintConfig.cpp:970 #: src/libslic3r/PrintConfig.cpp:985 src/libslic3r/PrintConfig.cpp:3142 #: src/libslic3r/PrintConfig.cpp:3151 src/libslic3r/PrintConfig.cpp:3292 #: src/libslic3r/PrintConfig.cpp:3300 src/libslic3r/PrintConfig.cpp:3308 #: src/libslic3r/PrintConfig.cpp:3315 src/libslic3r/PrintConfig.cpp:3323 #: src/libslic3r/PrintConfig.cpp:3331 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:883 #: src/libslic3r/PrintConfig.cpp:1766 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:57 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:110 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:116 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:122 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:127 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:134 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:136 msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " "printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:137 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:142 msgid "The name cannot be empty." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:147 msgid "The name cannot start with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:152 msgid "The name cannot end with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:157 msgid "The name cannot be the same as a preset alias name." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:191 #: src/slic3r/GUI/SavePresetDialog.cpp:197 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:221 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:283 msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:322 msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:325 msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:326 msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:327 msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345 #: src/slic3r/GUI/Tab.cpp:2586 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345 #: src/slic3r/GUI/Tab.cpp:2580 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:170 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:211 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:243 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:262 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:280 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:299 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:396 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:421 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:961 src/slic3r/GUI/Selection.cpp:1062 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:114 msgid "Data to send" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:550 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:618 msgid "Send system info" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:581 msgid "" "This is the first time you are running %1%. We would like to ask you to send " "some of your system information to us. This will only happen once and we " "will not ask you to do this again (only after you upgrade to the next " "version)." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:585 msgid "" "If we know your hardware, operating system, etc., it will greatly help us in " "development and prioritization, because we will be able to focus our effort " "more efficiently and spend time on features that are needed the most." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:588 msgid "Is it safe?" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:590 msgid "" "We do not send any personal information nor anything that would allow us to " "identify you later. To detect duplicate entries, a unique number derived " "from your system is sent, but the source information cannot be " "reconstructed. Apart from that, only general data about your OS, hardware " "and OpenGL installation are sent. PrusaSlicer is open source, if you want to " "inspect the code actually performing the communication, see %1%." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:614 msgid "Show verbatim data that will be sent" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:616 msgid "Ask me next time" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:617 msgid "Do not send anything" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:703 msgid "System info sent successfully. Thank you." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:706 msgid "Sending system info failed!" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:713 msgid "Sending system info was cancelled." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:720 msgid "Sending system info..." msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:84 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:150 msgid "Blacklisted libraries loaded into PrusaSlicer process:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:162 msgid "Eigen vectorization supported:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:169 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:114 src/libslic3r/PrintConfig.cpp:539 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:115 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:120 src/libslic3r/PrintConfig.cpp:554 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:121 msgid "Select the print profiles this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:216 msgid "Compare this preset with some another" msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:218 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:219 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:223 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:227 msgid "Search in settings [%1%]" msgstr "" #: src/slic3r/GUI/Tab.cpp:1285 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1298 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1299 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1302 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1308 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1334 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1336 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1338 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1342 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1346 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1347 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1348 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1352 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1358 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1366 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1369 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1383 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1387 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1395 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1396 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1434 src/slic3r/GUI/Tab.cpp:4288 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1440 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1452 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1453 src/libslic3r/PrintConfig.cpp:2351 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1458 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1469 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1483 msgid "Fuzzy skin (experimental)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1506 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1521 src/libslic3r/ExtrusionEntity.cpp:358 msgid "Skirt" msgstr "" #: src/slic3r/GUI/Tab.cpp:1543 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1548 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1568 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1581 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1585 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1589 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1597 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1605 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1613 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1633 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1643 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1646 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1657 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1660 src/slic3r/GUI/Tab.cpp:4365 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1661 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1663 msgid "Extruder clearance" msgstr "" #: src/slic3r/GUI/Tab.cpp:1668 src/slic3r/GUI/Tab.cpp:4366 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1675 src/libslic3r/PrintConfig.cpp:1976 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1681 src/slic3r/GUI/Tab.cpp:1682 #: src/slic3r/GUI/Tab.cpp:2048 src/slic3r/GUI/Tab.cpp:2049 #: src/slic3r/GUI/Tab.cpp:2432 src/slic3r/GUI/Tab.cpp:2433 #: src/slic3r/GUI/Tab.cpp:2505 src/slic3r/GUI/Tab.cpp:2506 #: src/slic3r/GUI/Tab.cpp:4216 src/slic3r/GUI/Tab.cpp:4217 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1688 src/slic3r/GUI/Tab.cpp:2056 #: src/slic3r/GUI/Tab.cpp:2439 src/slic3r/GUI/Tab.cpp:2512 #: src/slic3r/GUI/Tab.cpp:4224 src/slic3r/GUI/Tab.cpp:4371 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1689 src/slic3r/GUI/Tab.cpp:2057 #: src/slic3r/GUI/Tab.cpp:2440 src/slic3r/GUI/Tab.cpp:2513 #: src/slic3r/GUI/Tab.cpp:4225 src/slic3r/GUI/Tab.cpp:4372 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1788 #, possible-c-format msgid "" "The following line %s contains reserved keywords.\n" "Please remove it, as it may cause problems in G-code visualization and " "printing time estimation." msgid_plural "" "The following lines %s contain reserved keywords.\n" "Please remove them, as they may cause problems in G-code visualization and " "printing time estimation." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:1793 msgid "Found reserved keywords in" msgstr "" #: src/slic3r/GUI/Tab.cpp:1807 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1930 msgid "Nozzle" msgstr "" #: src/slic3r/GUI/Tab.cpp:1935 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1940 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1942 src/libslic3r/PrintConfig.cpp:1878 #: src/libslic3r/PrintConfig.cpp:2926 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1953 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1964 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1970 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1977 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1987 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1990 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:2003 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:2027 src/slic3r/GUI/Tab.cpp:2344 #: src/slic3r/GUI/Tab.cpp:3896 src/libslic3r/GCode.cpp:718 #: src/libslic3r/PrintConfig.cpp:2434 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2028 src/slic3r/GUI/Tab.cpp:2345 #: src/libslic3r/GCode.cpp:692 src/libslic3r/PrintConfig.cpp:2384 #: src/libslic3r/PrintConfig.cpp:2399 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2038 src/slic3r/GUI/Tab.cpp:2355 #: src/libslic3r/GCode.cpp:693 src/libslic3r/PrintConfig.cpp:659 #: src/libslic3r/PrintConfig.cpp:669 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2091 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2195 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"Add physical " "printer\" item in the Printer combo box. The Physical Printer profile editor " "opens also when clicking on the \"cog\" icon in the Printer settings tab. " "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2229 src/slic3r/GUI/Tab.cpp:2452 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2238 src/slic3r/GUI/UnsavedChangesDialog.cpp:1279 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2243 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2272 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2276 src/slic3r/GUI/Tab.cpp:2714 #: src/libslic3r/PrintConfig.cpp:1842 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2365 src/libslic3r/GCode.cpp:694 #: src/libslic3r/PrintConfig.cpp:399 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2375 src/libslic3r/GCode.cpp:695 #: src/libslic3r/PrintConfig.cpp:1568 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2385 src/libslic3r/GCode.cpp:696 #: src/libslic3r/PrintConfig.cpp:2809 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2395 src/libslic3r/GCode.cpp:697 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2405 src/libslic3r/GCode.cpp:698 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2414 src/libslic3r/GCode.cpp:699 #: src/libslic3r/PrintConfig.cpp:2425 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2423 src/libslic3r/GCode.cpp:700 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2459 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2474 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2475 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2481 src/slic3r/GUI/Tab.cpp:4205 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2495 src/slic3r/GUI/Tab.cpp:4201 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2556 src/slic3r/GUI/Tab.cpp:2641 #: src/libslic3r/PrintConfig.cpp:1597 src/libslic3r/PrintConfig.cpp:1632 #: src/libslic3r/PrintConfig.cpp:1649 src/libslic3r/PrintConfig.cpp:1666 #: src/libslic3r/PrintConfig.cpp:1682 src/libslic3r/PrintConfig.cpp:1692 #: src/libslic3r/PrintConfig.cpp:1702 src/libslic3r/PrintConfig.cpp:1715 #: src/libslic3r/PrintConfig.cpp:1725 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2579 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2585 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2594 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2599 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2608 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2613 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2666 src/slic3r/GUI/Tab.cpp:2675 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2676 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2711 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2736 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2741 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2747 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2760 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2767 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2947 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2949 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3250 msgid "New printer preset selected" msgstr "" #: src/slic3r/GUI/Tab.cpp:3556 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3623 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3623 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3632 msgid "It's a last preset for this physical printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:3637 msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3649 msgid "" "The physical printer below is based on the preset, you are going to delete." msgid_plural "" "The physical printers below are based on the preset, you are going to delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3654 msgid "Note, that the selected preset will be deleted from this printer too." msgid_plural "" "Note, that the selected preset will be deleted from these printers too." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3659 msgid "" "The physical printer below is based only on the preset, you are going to " "delete." msgid_plural "" "The physical printers below are based only on the preset, you are going to " "delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3664 msgid "" "Note, that this printer will be deleted after deleting the selected preset." msgid_plural "" "Note, that these printers will be deleted after deleting the selected preset." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3669 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3674 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3757 src/slic3r/GUI/Tab.cpp:3830 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3922 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:3925 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:3929 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:3951 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3953 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3955 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3957 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3962 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3964 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3967 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3969 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3979 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3981 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3984 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3987 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3989 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3995 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3996 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:4002 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4003 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4157 src/slic3r/GUI/Tab.cpp:4159 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4245 src/slic3r/GUI/Tab.cpp:4246 msgid "Material printing profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:4298 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4303 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4326 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4331 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4406 msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:4408 src/libslic3r/PrintConfig.cpp:3560 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4408 src/libslic3r/PrintConfig.cpp:3662 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1050 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1103 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1118 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1133 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1148 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:771 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:789 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:831 msgid "Old Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:832 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:863 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:866 msgid "Keep" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:863 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:870 msgid "Don't save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:870 msgid "Discard" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:876 msgid "Save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:896 msgid "Ask for unsaved changes when ??closing application??" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:897 msgid "" "You will not be asked about the unsaved changes the next time you create new " "project" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:898 msgid "" "You will not be asked about the unsaved changes the next time you switch a " "preset" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:899 msgid "" "You will not be asked about the unsaved changes the next time you: \n" "- close the application,\n" "- load project,\n" "- process Undo / Redo with a change of print technology,\n" "- take/load snapshot,\n" "- load config file/bundle,\n" "- export config_bundle" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:906 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:907 msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:909 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:939 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:941 msgid "All settings changes will not be saved" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:941 msgid "All settings changes will be discarded." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:944 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:945 msgid "Keep the selected settings." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:946 msgid "Transfer the selected settings to the newly selected preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:950 msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:951 msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1218 msgid "The following preset was modified" msgid_plural "The following presets were modified" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224 msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228 msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1229 msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1275 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1663 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1497 msgid "Show all preset (including incompatible)" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1512 msgid "Left Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1513 msgid "Right Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1558 msgid "Compare Presets" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1558 msgid "Compare %1% Presets" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1620 msgid "One of the presets doesn't found" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1631 msgid "Compared presets has different printer technology" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1645 msgid "Presets are the same" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1653 msgid "" "Presets are different.\n" "Click this button to select the same preset for the right and left preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1677 msgid "Undef category" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1677 msgid "Undef group" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:37 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:37 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:42 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:44 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:52 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:59 src/slic3r/GUI/UpdateDialogs.cpp:133 #: src/slic3r/GUI/UpdateDialogs.cpp:190 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:72 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:94 msgid "Opening Configuration Wizard" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:94 src/slic3r/GUI/UpdateDialogs.cpp:259 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:95 msgid "" "PrusaSlicer is not using the newest configuration available.\n" "Configuration Wizard may not offer the latest printers, filaments and SLA " "materials to be installed." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:97 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:100 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:121 src/slic3r/GUI/UpdateDialogs.cpp:180 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:141 msgid "Install" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:143 msgid "Don't install" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:156 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:156 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:159 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:198 src/slic3r/GUI/UpdateDialogs.cpp:245 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:214 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:223 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:228 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:244 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:263 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:280 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:297 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:297 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:302 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:21 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:54 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:114 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:116 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:120 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:122 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:173 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:299 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:308 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:309 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:352 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:361 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:362 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:376 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:442 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:454 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:454 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:643 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:644 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:70 #: src/slic3r/Utils/Repetier.cpp:69 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:157 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:151 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:154 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:221 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:237 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:244 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:250 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:253 #: src/slic3r/Utils/FixModelByWin10.cpp:386 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:265 #: src/slic3r/Utils/FixModelByWin10.cpp:272 #: src/slic3r/Utils/FixModelByWin10.cpp:304 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:376 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:392 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:394 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:396 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:398 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:410 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:416 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:91 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:97 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:99 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:227 msgid "Connection to Prusa SL1 / SL1S works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:233 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:271 msgid "Connection to PrusaLink works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:277 msgid "Could not connect to PrusaLink" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:61 msgid "Copying of file %1% to %2% failed: %3%" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:645 #: src/slic3r/Utils/PresetUpdater.cpp:662 msgid "Continue and install configuration updates?" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:777 msgid "" "Configuration Updates causes a lost of preset modification.\n" "So, check unsaved changes and save them if necessary." msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:779 msgid "Updating" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:808 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:812 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:815 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:157 msgid "Open G-code file:" msgstr "" #: src/slic3r/Utils/Repetier.cpp:84 msgid "Connection to Repetier works correctly." msgstr "" #: src/slic3r/Utils/Repetier.cpp:90 msgid "Could not connect to Repetier" msgstr "" #: src/slic3r/Utils/Repetier.cpp:92 msgid "Note: Repetier version at least 0.90.0 is required." msgstr "" #: src/slic3r/Utils/Repetier.cpp:246 msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:253 msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:266 msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/libslic3r/GCode.cpp:524 msgid "There is an object with no extrusions in the first layer." msgstr "" #: src/libslic3r/GCode.cpp:555 msgid "Empty layer between %1% and %2%." msgstr "" #: src/libslic3r/GCode.cpp:558 msgid "(Some lines not shown)" msgstr "" #: src/libslic3r/GCode.cpp:560 msgid "Object name: %1%" msgstr "" #: src/libslic3r/GCode.cpp:561 msgid "" "Make sure the object is printable. This is usually caused by negligibly " "small extrusions or by a faulty model. Try to repair the model or change its " "orientation on the bed." msgstr "" #: src/libslic3r/GCode.cpp:703 msgid "Filament Start G-code" msgstr "" #: src/libslic3r/GCode.cpp:710 msgid "Filament End G-code" msgstr "" #: src/libslic3r/GCode.cpp:749 msgid "In the custom G-code were found reserved keywords:" msgstr "" #: src/libslic3r/GCode.cpp:751 msgid "" "This may cause problems in g-code visualization and printing time estimation." msgstr "" #: src/libslic3r/GCode.cpp:1405 msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:332 src/libslic3r/ExtrusionEntity.cpp:368 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1734 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1745 msgid "" "The selected 3MF contains FDM supports painted object using a newer version " "of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1749 msgid "" "The selected 3MF contains seam painted object using a newer version of " "PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1753 msgid "" "The selected 3MF contains multi-material painted object using a newer " "version of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:993 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Print.cpp:446 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:449 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:453 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:455 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:464 msgid "" "Only a single object may be printed at a time in Spiral Vase mode. Either " "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" #: src/libslic3r/Print.cpp:468 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:481 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:487 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:489 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:491 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:493 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:495 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:516 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:518 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:521 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:523 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:536 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:558 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:571 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:574 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:585 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:593 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:597 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:633 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:638 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:792 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:814 msgid "Generating skirt and brim" msgstr "" #: src/libslic3r/Print.cpp:862 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:866 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLA/Pad.cpp:533 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:628 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:640 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:646 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:661 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:668 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:784 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 src/libslic3r/SLAPrintSteps.cpp:630 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:51 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:67 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:426 msgid "Too many overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:433 msgid "" "Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:441 msgid "Unable to drill the current configuration of holes into the model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:461 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:467 msgid "Failed to drill some holes into the model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:511 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:682 src/libslic3r/SLAPrintSteps.cpp:691 #: src/libslic3r/SLAPrintSteps.cpp:729 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:721 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:845 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:84 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:220 src/libslic3r/PrintConfig.cpp:221 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:228 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:233 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:238 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:243 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:245 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:253 msgid "G-code thumbnails" msgstr "" #: src/libslic3r/PrintConfig.cpp:254 msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" #: src/libslic3r/PrintConfig.cpp:262 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:269 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:270 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:278 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:279 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" #: src/libslic3r/PrintConfig.cpp:288 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:289 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:297 msgid "Name of the printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:305 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:321 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:329 msgid "Ignore HTTPS certificate revocation checks" msgstr "" #: src/libslic3r/PrintConfig.cpp:330 msgid "" "Ignore HTTPS certificate revocation checks in case of missing or offline " "distribution points. One may want to enable this option for self signed " "certificates if connection fails." msgstr "" #: src/libslic3r/PrintConfig.cpp:337 msgid "Printer preset names" msgstr "" #: src/libslic3r/PrintConfig.cpp:338 msgid "Names of presets related to the physical printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:343 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:348 msgid "API key" msgstr "" #: src/libslic3r/PrintConfig.cpp:349 msgid "HTTP digest" msgstr "" #: src/libslic3r/PrintConfig.cpp:369 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:370 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:377 msgid "Avoid crossing perimeters - Max detour length" msgstr "" #: src/libslic3r/PrintConfig.cpp:379 msgid "" "The maximum detour length for avoid crossing perimeters. If the detour is " "longer than this value, avoid crossing perimeters is not applied for this " "travel path. Detour length could be specified either as an absolute value or " "as percentage (for example 50%) of a direct travel path." msgstr "" #: src/libslic3r/PrintConfig.cpp:382 msgid "mm or % (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:389 src/libslic3r/PrintConfig.cpp:2771 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:390 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:393 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:400 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:410 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:411 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:422 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:423 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:431 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:433 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:439 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:440 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:442 src/libslic3r/PrintConfig.cpp:613 #: src/libslic3r/PrintConfig.cpp:1160 src/libslic3r/PrintConfig.cpp:1169 #: src/libslic3r/PrintConfig.cpp:1362 src/libslic3r/PrintConfig.cpp:1655 #: src/libslic3r/PrintConfig.cpp:1706 src/libslic3r/PrintConfig.cpp:1717 #: src/libslic3r/PrintConfig.cpp:1727 src/libslic3r/PrintConfig.cpp:1925 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:448 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:450 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:453 src/libslic3r/PrintConfig.cpp:1072 #: src/libslic3r/PrintConfig.cpp:2216 src/libslic3r/PrintConfig.cpp:2226 #: src/libslic3r/PrintConfig.cpp:2517 src/libslic3r/PrintConfig.cpp:2756 #: src/libslic3r/PrintConfig.cpp:2973 src/libslic3r/PrintConfig.cpp:3534 #: src/libslic3r/PrintConfig.cpp:3655 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:459 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:460 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:461 src/libslic3r/PrintConfig.cpp:1084 #: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1735 #: src/libslic3r/PrintConfig.cpp:1798 src/libslic3r/PrintConfig.cpp:2049 #: src/libslic3r/PrintConfig.cpp:2108 src/libslic3r/PrintConfig.cpp:3159 #: src/libslic3r/PrintConfig.cpp:3448 src/libslic3r/PrintConfig.cpp:3574 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:468 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:470 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:480 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:482 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:891 #: src/libslic3r/PrintConfig.cpp:899 src/libslic3r/PrintConfig.cpp:908 #: src/libslic3r/PrintConfig.cpp:916 src/libslic3r/PrintConfig.cpp:943 #: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:1296 #: src/libslic3r/PrintConfig.cpp:1480 src/libslic3r/PrintConfig.cpp:1562 #: src/libslic3r/PrintConfig.cpp:1638 src/libslic3r/PrintConfig.cpp:1672 #: src/libslic3r/PrintConfig.cpp:1684 src/libslic3r/PrintConfig.cpp:1694 #: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1816 #: src/libslic3r/PrintConfig.cpp:1956 src/libslic3r/PrintConfig.cpp:2183 #: src/libslic3r/PrintConfig.cpp:2192 src/libslic3r/PrintConfig.cpp:2721 #: src/libslic3r/PrintConfig.cpp:2871 src/libslic3r/PrintConfig.cpp:2881 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:490 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:492 msgid "" "The horizontal width of the brim that will be printed around each object on " "the first layer. When raft is used, no brim is generated (use " "raft_first_layer_expansion)." msgstr "" #: src/libslic3r/PrintConfig.cpp:501 msgid "Brim type" msgstr "" #: src/libslic3r/PrintConfig.cpp:503 msgid "" "The places where the brim will be printed around each object on the first " "layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:509 msgid "No brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:510 msgid "Outer brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:511 msgid "Inner brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:512 msgid "Outer and inner brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:517 msgid "Brim separation gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:519 msgid "" "Offset of brim from the printed object. The offset is applied after the " "elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:526 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:527 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:534 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:535 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:545 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:546 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:560 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:561 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:578 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:579 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:587 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:588 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:593 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:594 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:601 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:602 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:610 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:619 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:620 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:626 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:627 src/libslic3r/PrintConfig.cpp:3378 #: src/libslic3r/PrintConfig.cpp:3389 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:633 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:634 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:643 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:645 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:651 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:652 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:660 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:670 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:681 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:683 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:689 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:691 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:701 src/libslic3r/PrintConfig.cpp:1138 #: src/libslic3r/PrintConfig.cpp:2686 src/libslic3r/PrintConfig.cpp:2703 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:702 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:703 src/libslic3r/PrintConfig.cpp:1139 msgid "Aligned Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:1145 #: src/libslic3r/PrintConfig.cpp:2704 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:705 src/libslic3r/PrintConfig.cpp:1149 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:706 src/libslic3r/PrintConfig.cpp:1150 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:1151 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:713 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:715 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:724 src/libslic3r/PrintConfig.cpp:736 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:726 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:840 #: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1387 #: src/libslic3r/PrintConfig.cpp:1444 src/libslic3r/PrintConfig.cpp:1471 #: src/libslic3r/PrintConfig.cpp:1945 src/libslic3r/PrintConfig.cpp:2331 #: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2593 #: src/libslic3r/PrintConfig.cpp:2827 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:738 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:741 src/libslic3r/PrintConfig.cpp:1212 #: src/libslic3r/PrintConfig.cpp:1223 src/libslic3r/PrintConfig.cpp:2290 #: src/libslic3r/PrintConfig.cpp:2343 src/libslic3r/PrintConfig.cpp:2672 #: src/libslic3r/PrintConfig.cpp:2841 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:748 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:750 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:756 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:758 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:768 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:780 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:791 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:801 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:802 src/libslic3r/PrintConfig.cpp:865 #: src/libslic3r/PrintConfig.cpp:3230 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:808 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:809 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:818 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:819 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:824 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:825 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:834 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:836 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:848 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:849 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:854 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:855 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:857 src/libslic3r/PrintConfig.cpp:2278 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:864 src/libslic3r/PrintConfig.cpp:3229 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:870 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:871 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:879 src/libslic3r/PrintConfig.cpp:1763 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:880 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:889 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:890 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:897 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:898 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:905 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:906 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:914 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:915 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:922 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:923 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:932 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:933 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:941 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:942 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:949 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:950 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:954 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:960 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:961 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:968 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:969 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:976 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:977 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:983 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:984 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:992 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:3268 #: src/libslic3r/PrintConfig.cpp:3269 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:1000 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1003 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:1008 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1009 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:1036 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1037 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:1043 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:1044 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:1049 msgid "Spool weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:1050 msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " "filament spool before printing and one may compare the measured weight with " "the calculated weight of the filament with the spool to find out whether the " "amount of filament on the spool is sufficient to finish the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1054 msgid "g" msgstr "" #: src/libslic3r/PrintConfig.cpp:1063 src/libslic3r/PrintConfig.cpp:3373 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1067 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1069 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:1081 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:1083 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:1118 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:1120 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1140 src/libslic3r/PrintConfig.cpp:2735 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1142 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:1143 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1144 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:2688 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1147 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1148 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1152 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1153 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1158 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1166 msgid "First object layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1167 msgid "" "This is the acceleration your printer will use for first layer of object " "above raft interface. Set zero to disable acceleration control for first " "layer of object above raft interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:1176 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1177 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:1187 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1201 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates." msgstr "" #: src/libslic3r/PrintConfig.cpp:1208 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1209 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1219 msgid "Speed of object first layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1220 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first object layer above raft interface, regardless " "of their type. If expressed as a percentage (for example: 40%) it will scale " "the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1230 msgid "First layer nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1231 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:1239 msgid "Full fan speed at layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:1240 msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " "\"full_fan_speed_layer\" will be ignored if lower than " "\"disable_fan_first_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"disable_fan_first_layers\" + 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1252 msgid "Fuzzy skin type." msgstr "" #: src/libslic3r/PrintConfig.cpp:1259 msgid "Outside walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:1260 msgid "All walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:1265 msgid "Fuzzy skin thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:1267 msgid "" "The maximum distance that each skin point can be offset (both ways), " "measured perpendicular to the perimeter wall." msgstr "" #: src/libslic3r/PrintConfig.cpp:1275 msgid "Fuzzy skin point distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1277 msgid "" "Perimeters will be split into multiple segments by inserting Fuzzy skin " "points. Lowering the Fuzzy skin point distance will increase the number of " "randomly offset points on the perimeter wall." msgstr "" #: src/libslic3r/PrintConfig.cpp:1285 msgid "Fill gaps" msgstr "" #: src/libslic3r/PrintConfig.cpp:1287 msgid "" "Enables filling of gaps between perimeters and between the inner most " "perimeters and infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1294 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:1302 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1303 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:1310 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1311 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1338 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1343 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1344 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1351 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1352 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1360 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1368 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1370 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1373 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1379 msgid "Length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1381 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " "anchor_length_max. Set this parameter to zero to disable anchoring " "perimeters connected to a single infill line." msgstr "" #: src/libslic3r/PrintConfig.cpp:1397 msgid "0 (no open anchors)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1402 src/libslic3r/PrintConfig.cpp:1425 msgid "1000 (unlimited)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1407 msgid "Maximum length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1409 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " "parameter. Set this parameter to zero to disable anchoring." msgstr "" #: src/libslic3r/PrintConfig.cpp:1420 msgid "0 (not anchored)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1430 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1432 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1440 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1451 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1452 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1457 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1459 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1466 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1468 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1479 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1487 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1488 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1501 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1502 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1510 msgid "Maximum width of a segmented region" msgstr "" #: src/libslic3r/PrintConfig.cpp:1511 msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" #: src/libslic3r/PrintConfig.cpp:1512 src/libslic3r/PrintConfig.cpp:2123 #: src/libslic3r/PrintConfig.cpp:2132 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1519 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1520 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1526 src/libslic3r/PrintConfig.cpp:1528 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1533 msgid "All top surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1534 msgid "Topmost surface only" msgstr "" #: src/libslic3r/PrintConfig.cpp:1535 msgid "All solid surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1540 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1542 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1550 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1552 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1569 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1580 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1581 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1589 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1590 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1595 msgid "How to apply limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1596 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1598 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1603 msgid "Emit to G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1604 msgid "Use for time estimate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1605 msgid "Ignore" msgstr "" #: src/libslic3r/PrintConfig.cpp:1628 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1629 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1634 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1635 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1636 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1637 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1645 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1646 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1647 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1648 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1652 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1653 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1654 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1662 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1663 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1664 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1665 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1668 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1669 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1670 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1671 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1681 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1683 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1691 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1693 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1701 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1703 msgid "" "Maximum acceleration when extruding (M204 P)\n" "\n" "Marlin (legacy) firmware flavor will use this also as travel acceleration " "(M204 T)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1714 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1716 msgid "Maximum acceleration when retracting (M204 R)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1724 msgid "Maximum acceleration for travel moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:1726 msgid "Maximum acceleration for travel moves (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1733 src/libslic3r/PrintConfig.cpp:1742 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1734 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1743 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1753 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1754 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1764 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1773 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1774 src/libslic3r/PrintConfig.cpp:1785 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1778 src/libslic3r/PrintConfig.cpp:1789 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1784 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1796 src/libslic3r/PrintConfig.cpp:1805 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1797 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1806 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1814 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1815 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1822 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1823 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1832 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1833 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1843 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1848 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1849 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1871 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1872 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1879 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1886 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1887 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1896 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1898 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1904 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1905 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1913 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1914 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1922 src/libslic3r/PrintConfig.cpp:1939 #: src/libslic3r/PrintConfig.cpp:1953 src/libslic3r/PrintConfig.cpp:1963 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1923 msgid "" "This is the acceleration your printer will use for perimeters. Set zero to " "disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1930 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1932 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1941 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1955 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1965 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1969 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1977 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1989 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1990 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1995 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1996 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2004 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2005 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:2010 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:2011 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:2028 msgid "Raft contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2030 msgid "" "The vertical distance between object and raft. Ignored for soluble interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2037 msgid "Raft expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2039 msgid "Expansion of the raft in XY plane for better stability." msgstr "" #: src/libslic3r/PrintConfig.cpp:2046 msgid "First layer density" msgstr "" #: src/libslic3r/PrintConfig.cpp:2048 msgid "Density of the first raft or support layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2056 msgid "First layer expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2058 msgid "" "Expansion of the first raft or support layer to improve adhesion to print " "bed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2065 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2067 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:2075 msgid "Slice resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:2076 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:2086 msgid "G-code resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:2087 msgid "" "Maximum deviation of exported G-code paths from their full resolution " "counterparts. Very high resolution G-code requires huge amount of RAM to " "slice and preview, also a 3D printer may stutter not being able to process a " "high resolution G-code in a timely manner. On the other hand, a low " "resolution G-code will produce a low poly effect and because the G-code " "reduction is performed at each layer independently, visible artifacts may be " "produced." msgstr "" #: src/libslic3r/PrintConfig.cpp:2098 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2099 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:2105 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:2106 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:2113 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2114 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:2119 src/libslic3r/PrintConfig.cpp:2127 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2120 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2121 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2128 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2129 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2137 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2138 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:2145 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2146 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:2147 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2154 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2155 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2156 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2164 src/libslic3r/PrintConfig.cpp:2172 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:2165 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2173 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:2180 src/libslic3r/PrintConfig.cpp:2181 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2182 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2188 src/libslic3r/PrintConfig.cpp:2189 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2190 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:2197 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:2199 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:2205 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:2206 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:2207 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:2215 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2217 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:2218 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2225 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2227 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2228 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2235 msgid "Distance from brim/object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2236 msgid "" "Distance between skirt and brim (when draft shield is not used) or objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:2242 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2243 msgid "Height of skirt expressed in layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2249 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:2250 msgid "" "With draft shield active, the skirt will be printed skirt_distance from the " "object, possibly intersecting brim.\n" "Enabled = skirt is as tall as the highest printed object.\n" "Limited = skirt is as tall as specified by skirt_height.\n" "This is useful to protect an ABS or ASA print from warping and detaching " "from print bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:2258 msgid "Disabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2259 msgid "Limited" msgstr "" #: src/libslic3r/PrintConfig.cpp:2260 msgid "Enabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2265 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2266 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2267 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:2275 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2276 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:2285 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:2287 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2297 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:2299 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2300 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:2306 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2308 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:2314 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:2316 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2328 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2340 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2352 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2358 src/libslic3r/PrintConfig.cpp:2359 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:2365 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:2366 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" #: src/libslic3r/PrintConfig.cpp:2374 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2375 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:2385 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:2400 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:2416 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2417 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2426 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:2435 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2443 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2444 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:2449 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:2450 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2455 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2456 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2463 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2465 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:2473 msgid "Slicing Mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2475 msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" #: src/libslic3r/PrintConfig.cpp:2480 msgid "Regular" msgstr "" #: src/libslic3r/PrintConfig.cpp:2481 msgid "Even-odd" msgstr "" #: src/libslic3r/PrintConfig.cpp:2482 msgid "Close holes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2487 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2489 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2493 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2495 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2501 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2503 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2514 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2516 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2526 src/libslic3r/PrintConfig.cpp:3483 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2532 msgid "Top contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2534 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2542 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2543 msgid "0.1 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2544 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2550 msgid "Bottom contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2552 msgid "" "The vertical distance between the object top surface and the support " "material interface. If set to zero, support_material_contact_distance will " "be used for both top and bottom contact Z distances." msgstr "" #: src/libslic3r/PrintConfig.cpp:2559 src/libslic3r/PrintConfig.cpp:2643 msgid "same as top" msgstr "" #: src/libslic3r/PrintConfig.cpp:2560 msgid "0.1" msgstr "" #: src/libslic3r/PrintConfig.cpp:2561 msgid "0.2" msgstr "" #: src/libslic3r/PrintConfig.cpp:2566 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2568 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2573 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2579 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2581 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2590 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2600 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2602 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2607 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2609 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2617 msgid "Top interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2619 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2626 msgid "0 (off)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2627 msgid "1 (light)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2628 msgid "2 (default)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2629 msgid "3 (heavy)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2635 msgid "Bottom interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2637 msgid "" "Number of interface layers to insert between the object(s) and support " "material. Set to -1 to use support_material_interface_layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2649 msgid "Closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2651 msgid "" "For snug supports, the support regions will be merged using morphological " "closing operation. Gaps smaller than the closing radius will be filled in." msgstr "" #: src/libslic3r/PrintConfig.cpp:2659 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2661 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2670 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2679 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2681 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2687 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2693 msgid "Interface pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2695 msgid "" "Pattern used to generate support material interface. Default pattern for non-" "soluble support interface is Rectilinear, while default pattern for soluble " "support interface is Concentric." msgstr "" #: src/libslic3r/PrintConfig.cpp:2709 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2711 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2720 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2727 msgid "Style" msgstr "" #: src/libslic3r/PrintConfig.cpp:2729 msgid "" "Style and shape of the support towers. Projecting the supports into a " "regular grid will create more stable supports, while snug support towers " "will save material and reduce object scarring." msgstr "" #: src/libslic3r/PrintConfig.cpp:2736 msgid "Snug" msgstr "" #: src/libslic3r/PrintConfig.cpp:2741 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2743 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2749 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2751 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2763 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2765 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2772 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2775 msgid "Nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2781 msgid "Thick bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:2783 msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" #: src/libslic3r/PrintConfig.cpp:2789 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2791 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2797 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2798 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2810 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} " "and {next_extruder} can be used. When a tool-changing command which changes " "to the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2823 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2836 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2851 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2852 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2860 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2863 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2870 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2878 msgid "Z travel" msgstr "" #: src/libslic3r/PrintConfig.cpp:2879 msgid "" "Speed for movements along the Z axis.\n" "When set to zero, the value is ignored and regular travel speed is used " "instead." msgstr "" #: src/libslic3r/PrintConfig.cpp:2887 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2888 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2894 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2895 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2901 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2902 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2912 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2913 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2919 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2920 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2927 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2933 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2934 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2940 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2941 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2950 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2951 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2957 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2958 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2965 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2971 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2972 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2978 src/libslic3r/PrintConfig.cpp:2979 msgid "Wipe tower brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2987 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2988 msgid "" "Purging after toolchange will be done inside this object's infills. This " "lowers the amount of waste but may result in longer print time due to " "additional travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2995 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2996 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:3002 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3003 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:3009 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3011 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:3019 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:3020 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3087 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3088 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3093 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3094 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3099 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:3101 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3107 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3112 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3113 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:3114 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3119 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3120 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:3121 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3126 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3127 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3133 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:3134 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:3139 src/libslic3r/PrintConfig.cpp:3764 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:3140 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3141 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3148 src/libslic3r/PrintConfig.cpp:3763 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:3149 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3150 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3157 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:3158 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3165 src/libslic3r/PrintConfig.cpp:3166 #: src/libslic3r/PrintConfig.cpp:3167 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3173 src/libslic3r/PrintConfig.cpp:3175 msgid "Printer scaling correction in X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3174 src/libslic3r/PrintConfig.cpp:3182 #: src/libslic3r/PrintConfig.cpp:3190 msgid "Printer scaling X axis correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3181 src/libslic3r/PrintConfig.cpp:3183 msgid "Printer scaling correction in Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3189 src/libslic3r/PrintConfig.cpp:3191 msgid "Printer scaling correction in Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3197 src/libslic3r/PrintConfig.cpp:3198 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3199 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:3205 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3207 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:3214 src/libslic3r/PrintConfig.cpp:3215 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3216 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:3235 src/libslic3r/PrintConfig.cpp:3236 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:3247 src/libslic3r/PrintConfig.cpp:3248 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3254 src/libslic3r/PrintConfig.cpp:3255 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:3256 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3261 src/libslic3r/PrintConfig.cpp:3262 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:3263 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:3270 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3277 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3282 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:3283 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3290 src/libslic3r/PrintConfig.cpp:3291 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3298 src/libslic3r/PrintConfig.cpp:3299 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3306 src/libslic3r/PrintConfig.cpp:3307 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3313 src/libslic3r/PrintConfig.cpp:3314 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3321 src/libslic3r/PrintConfig.cpp:3322 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3329 src/libslic3r/PrintConfig.cpp:3330 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3336 src/libslic3r/PrintConfig.cpp:3337 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:3343 src/libslic3r/PrintConfig.cpp:3344 msgid "Correction for expansion in X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3350 src/libslic3r/PrintConfig.cpp:3351 msgid "Correction for expansion in Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3357 src/libslic3r/PrintConfig.cpp:3358 msgid "Correction for expansion in Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3364 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:3365 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:3377 src/libslic3r/PrintConfig.cpp:3388 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:3399 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:3401 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:3406 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3408 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:3415 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3417 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:3424 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3426 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3434 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3436 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:3444 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:3446 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:3455 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:3457 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:3465 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:3466 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:3474 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:3475 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:3476 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:3488 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:3490 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:3499 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3501 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:3509 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3511 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:3518 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3521 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3531 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3533 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:3541 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:3543 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3550 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3552 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:3562 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:3573 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:3579 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:3581 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:3587 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:3589 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:3594 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3596 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3604 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3605 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:3618 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:3619 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:3629 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3631 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3651 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3653 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3664 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3669 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3671 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3676 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3678 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3687 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3689 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3696 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3698 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3705 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3708 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3715 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:3717 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:3722 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3724 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:3732 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:3734 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:3744 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3756 msgid "Print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:3758 msgid "" "A slower printing profile might be necessary when using materials with " "higher viscosity or with some hollowed parts. It slows down the tilt " "movement and adds a delay before exposure." msgstr "" #: src/libslic3r/PrintConfig.cpp:4220 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:4221 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:4232 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:4233 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:4238 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4239 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4243 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4244 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4248 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:4249 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:4254 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:4259 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4260 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:4265 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:4266 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:4271 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:4272 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:4277 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4278 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4282 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4283 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4287 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:4288 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:4292 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4293 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:4303 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:4304 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:4309 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:4330 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:4331 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:4335 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:4336 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:4339 msgid "Ensure on bed" msgstr "" #: src/libslic3r/PrintConfig.cpp:4340 msgid "" "Lift the object above the bed when it is partially below. Enabled by " "default, use --no-ensure-on-bed to disable." msgstr "" #: src/libslic3r/PrintConfig.cpp:4344 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:4345 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:4349 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:4350 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:4354 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:4359 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4363 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4367 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:4368 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4372 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:4373 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4378 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4383 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:4386 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:4387 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:4396 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:4397 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:4400 msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4401 msgid "" "This version of PrusaSlicer may not understand configurations produced by " "the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend " "the list of supported firmware flavors. One may decide to bail out or to " "substitute an unknown value with a default silently or verbosely." msgstr "" #: src/libslic3r/PrintConfig.cpp:4408 msgid "Bail out on unknown configuration values" msgstr "" #: src/libslic3r/PrintConfig.cpp:4409 msgid "" "Enable reading unknown configuration values by verbosely substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4410 msgid "" "Enable reading unknown configuration values by silently substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4414 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4415 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:4418 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:4419 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4423 msgid "Single instance mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:4424 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:4435 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:4436 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4439 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:4440 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:4446 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4447 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:124 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:227 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:389 msgid "Generating support material" msgstr "" #: resources/data/hints.ini: [hint:Fuzzy skin] msgid "Fuzzy skin\nDid you know that you can create rough fibre-like texture on the sides of your models using theFuzzy skinfeature? You can also use modifiers to apply fuzzy-skin only to a portion of your model." msgstr "" #: resources/data/hints.ini: [hint:Shapes gallery] msgid "Shapes gallery\nDid you know that PrusaSlicer has a Shapes Gallery? You can use the included models as modifiers, negative volumes or as printable objects. Right-click the platter and selectAdd Shape - Gallery." msgstr "" #: resources/data/hints.ini: [hint:Arrange settings] msgid "Arrange settings\nDid you know that you can right-click theArrange iconto adjust the size of the gap between objects and to allow automatic rotations?" msgstr "" #: resources/data/hints.ini: [hint:Negative volume] msgid "Negative volume\nDid you know that you can subtract one mesh from another using the Negative volume modifier? That way you can, for example, create easily resizable holes directly in PrusaSlicer. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Simplify mesh] msgid "Simplify mesh\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Reload from disk] msgid "Reload from disk\nDid you know that if you created a newer version of your model, you can simply reload it in PrusaSlicer? Right-click the model in the 3D view and choose Reload from disk. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Hiding sidebar] msgid "Hiding sidebar\nDid you know that you can hide the right sidebar using the shortcut Shift+Tab? You can also enable the icon for this from thePreferences." msgstr "" #: resources/data/hints.ini: [hint:Perspective camera] msgid "Perspective camera\nDid you know that you can use the K key to quickly switch between an orthographic and perspective camera?" msgstr "" #: resources/data/hints.ini: [hint:Camera Views] msgid "Camera Views\nDid you know that you can use the number keys 0-6 to quickly switch between predefined camera angles?" msgstr "" #: resources/data/hints.ini: [hint:Place on face] msgid "Place on face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select thePlace on facefunction or press the F key." msgstr "" #: resources/data/hints.ini: [hint:Set number of instances] msgid "Set number of instances\nDid you know that you can right-click a model and set an exact number of instances instead of copy-pasting it several times?" msgstr "" #: resources/data/hints.ini: [hint:Combine infill] msgid "Combine infill\nDid you know that you can print the infill with a higher layer height compared to perimeters to save print time using the settingCombine infill every." msgstr "" #: resources/data/hints.ini: [hint:Variable layer height] msgid "Variable layer height\nDid you know that you can print different regions of your model with a different layer height and smooth the transitions between them? Try theVariable layer height tool.(Not available for SLA printers.)" msgstr "" #: resources/data/hints.ini: [hint:Undo/redo history] msgid "Undo/redo history\nDid you know that you can right-click theundo/redo arrowsto see the history of changes and to undo or redo several actions at once?" msgstr "" #: resources/data/hints.ini: [hint:Different layer height for each model] msgid "Different layer height for each model\nDid you know that you can print each model on the plater with a different layer height? Right-click the model in the 3D view, choose Layers and Perimeters and adjust the values in the right panel. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Solid infill threshold area] msgid "Solid infill threshold area\nDid you know that you can make parts of your model with a small cross-section be filled with solid infill automatically? Set theSolid infill threshold area.(Expert mode only.)" msgstr "" #: resources/data/hints.ini: [hint:Search functionality] msgid "Search functionality\nDid you know that you use theSearchtool to quickly find a specific PrusaSlicer setting? Or use the familiar shortcut Ctrl+F." msgstr "" #: resources/data/hints.ini: [hint:Box selection] msgid "Box selection\nDid you know that you can do a box selection with Shift+Mouse drag? You can also box-deselect objects with Alt+Mouse drag." msgstr "" #: resources/data/hints.ini: [hint:Zoom on selected objects or on all objects if none selected] msgid "Zoom on selected objects or on all objects if none selected\nDid you know that you can zoom in on selected objects by pressing the Z key? If none are selected, the camera will zoom on all objects in the scene." msgstr "" #: resources/data/hints.ini: [hint:Printable toggle] msgid "Printable toggle\nDid you know that you can disable the G-code generation for the selected model without having to move or delete it? Toggle the Printable property of a model from the Right-click context menu." msgstr "" #: resources/data/hints.ini: [hint:Mirror] msgid "Mirror\nDid you know that you can mirror the selected model to create a reversed version of it? Right-click the model, select Mirror and pick the mirror axis." msgstr "" #: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45 degrees] msgid "PageUp / PageDown quick rotation by 45 degrees\nDid you know that you can quickly rotate selected models by 45 degrees around the Z-axis clockwise or counter-clockwise by pressing Page Up or Page Down respectively?" msgstr "" #: resources/data/hints.ini: [hint:Load config from G-code] msgid "Load config from G-code\nDid you know that you can use File-Import-Import Config to load print, filament and printer profiles from an existing G-code file? Similarly, you can use File-Import-Import SL1 / SL1S archive, which also lets you reconstruct 3D models from the voxel data." msgstr "" #: resources/data/hints.ini: [hint:Ironing] msgid "Ironing\nDid you know that you can smooth top surfaces of prints using Ironing? The nozzle will run a special second infill phase at the same layer to fill in holes and flatten any lifted plastic. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on supports] msgid "Paint-on supports\nDid you know that you can paint directly on the object and select areas, where supports should be enforced or blocked? Try thePaint-on supportsfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on seam] msgid "Paint-on seam\nDid you know that you can paint directly on the object and select where to place the start/endpoint of each perimeter loop? Try theSeam paintingfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Insert Pause] msgid "Insert Pause\nDid you know that you can schedule the print to pause at a specific layer? Right-click the layer slider in the Preview and select Add pause print (M601). This can be used to insert magnets, weights or nuts into your prints. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Insert Custom G-code] msgid "Insert Custom G-code\nDid you know that you can insert a custom G-code at a specific layer? Left-click the layer in the Preview, Right-click the plus icon and select Add custom G-code. With this function you can, for example, create a temperature tower. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Configuration snapshots] msgid "Configuration snapshots\nDid you know that roll back to a complete backup of all system and user profiles? You can view and move back and forth between snapshots using the Configuration - Configuration snapshots menu." msgstr "" #: resources/data/hints.ini: [hint:Minimum shell thickness] msgid "Minimum shell thickness\nDid you know that instead of the number of top and bottom layers, you can define theMinimum shell thicknessin millimeters? This feature is especially useful when using the variable layer height function." msgstr "" #: resources/data/hints.ini: [hint:Settings in non-modal window] msgid "Settings in non-modal window\nDid you know that you can open the Settings in a new non-modal window? This means you can have settings open on one screen and the G-code Preview on the other. Go to thePreferencesand select Settings in non-modal window." msgstr "" #: resources/data/hints.ini: [hint:Adaptive infills] msgid "Adaptive infills\nDid you know that you can use the Adaptive cubic and Support cubic infills to decrease the print time and lower the filament consumption? Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Fullscreen mode] msgid "Fullscreen mode\nDid you know that you can switch PrusaSlicer to fullscreen mode? Use the F11 hotkey." msgstr ""