# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-05-26 13:11+0200\n"
"PO-Revision-Date: 2022-09-27 15:39+0200\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: nl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 3.1.1\n"

#: src/slic3r/GUI/AboutDialog.cpp:46 src/slic3r/GUI/AboutDialog.cpp:304
msgid "Portions copyright"
msgstr "Gedeeltelijk auteursrecht"

#: src/slic3r/GUI/AboutDialog.cpp:143 src/slic3r/GUI/AboutDialog.cpp:269
msgid "Copyright"
msgstr "Auteursrecht"

#: src/slic3r/GUI/AboutDialog.cpp:144
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""
"Licentieovereenkomst van alle volgende programma's maken deel uit van de "
"software-licentieovereenkomst"

#: src/slic3r/GUI/AboutDialog.cpp:213
#, c-format, boost-format
msgid "About %s"
msgstr "Over %s"

#: src/slic3r/GUI/AboutDialog.cpp:244 src/slic3r/GUI/AboutDialog.cpp:368
#: src/slic3r/GUI/GUI_App.cpp:282
msgid "Version"
msgstr "Versie"

#. TRN AboutDialog: "Slic3r %1% GNU Affero General Public License"
#: src/slic3r/GUI/AboutDialog.cpp:271 src/slic3r/GUI/GUI_App.cpp:288
msgid "is licensed under the"
msgstr "is gelicenseerd onder de"

#: src/slic3r/GUI/AboutDialog.cpp:272 src/slic3r/GUI/GUI_App.cpp:288
msgid "GNU Affero General Public License, version 3"
msgstr "GNU Affero Algemene Publieke Licentie, versie 3"

#: src/slic3r/GUI/AboutDialog.cpp:273
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""
"PrusaSlicer is gebaseerd op Slic3r van Alessandro Ranellucci en de RepRap-"
"community."

#: src/slic3r/GUI/AboutDialog.cpp:274
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Bijdragen van Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr "
"Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Simon "
"Tillema en vele anderen."

#: src/slic3r/GUI/AboutDialog.cpp:309
msgid "Copy Version Info"
msgstr "Kopieer versie-info"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""
"%s heeft een fout opgelopen. Mogelijk komt dit door een tekort aan RAM "
"geheugen. Als u zeker weet genoeg RAM geheugen te hebben, kan dit een andere "
"oorzaak hebben. We stellen het op prijs als u het aan ons rapporteert."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
#, boost-format
msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
msgstr "PrusaSlicer heeft een fatale fout opgelopen: \"%1%\""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr ""
"Sla het project op en herstart PrusaSlicer. We zouden het waarderen als u "
"deze fout rapporteert."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188
msgid "Slicing complete"
msgstr "Slicen gelukt"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
#, boost-format
msgid "Masked SLA file exported to %1%"
msgstr "Gemaskeerd SLA bestand geëxporteerd naar %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:279
msgid "Access violation"
msgstr "Toegangsschending"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:281
msgid "Illegal instruction"
msgstr "Ongeldige instructie"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:283
msgid "Divide by zero"
msgstr "Delen door nul"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:285
msgid "Overflow"
msgstr "Overvloei"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:287
msgid "Underflow"
msgstr "Ondervloei"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
msgid "Floating reserved operand"
msgstr "Fout: floating reserved operand"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:293
msgid "Stack overflow"
msgstr "Stack Overflow"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:652
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:719
msgid "Running post-processing scripts"
msgstr "Uitvoeren van nabewerkingsscripts"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:683
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703
msgid "Unknown error occured during exporting G-code."
msgstr "Onbekende fout opgetreden tijdens exporteren van de G-code."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:688
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""
"Fout bij het exporteren naar output-G-code. Is de SD-kaart geblokkeerd tegen "
"schrijven?\n"
"Foutbericht: %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:691
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""
"Fout bij het exporteren naar output-G-code. Het probleem ligt mogelijk bij "
"het doelapparaat. Probeer het opnieuw te exporteren of gebruik een ander "
"apparat. De beschadigde G-code is opgeslagen als %1%.tmp."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:694
#, boost-format
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""
"Fout bij het exporteren naar output-G-code. Hernoemen van het bestand "
"mislukt. Huidige locatie is %1%.tmp. Probeer opnieuw te exporteren."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:697
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""
"Fout bij het exporteren naar output-G-code. Exporteren gelukt, maar kan het "
"bestand %1% niet openen om te controleren. De output is %2%.tmp."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:700
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""
"Fout bij het exporteren naar output-G-code. Exporteren gelukt, maar kan het "
"bestand niet openen om te controleren. De output is %1%.tmp."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:708
#, boost-format
msgid "G-code file exported to %1%"
msgstr ".gcode-bestand geëxporteerd naar %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:738
#, boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
"Plannen van de upload naar '%1%'. Zie Venster -> printhost-uploadwachtrij"

#: src/slic3r/GUI/BedShapeDialog.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:224 src/slic3r/GUI/Plater.cpp:222
#: src/slic3r/GUI/Tab.cpp:2874
msgid "Size"
msgstr "Grootte"

#: src/slic3r/GUI/BedShapeDialog.cpp:32
msgid "Origin"
msgstr "Nulpunt"

#: src/slic3r/GUI/BedShapeDialog.cpp:33
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1993
#: src/libslic3r/PrintConfig.cpp:1107
msgid "Diameter"
msgstr "Diameter"

#: src/slic3r/GUI/BedShapeDialog.cpp:49
msgid "Size in X and Y of the rectangular plate."
msgstr "Afmeting in X en Y van het rechthoekig platform."

#: src/slic3r/GUI/BedShapeDialog.cpp:58
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""
"Afstand van het nulpunt in de G-code naar de linkervoorhoek van het printbed."

#: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:336
#: src/slic3r/GUI/ConfigWizard.cpp:1845 src/slic3r/GUI/ConfigWizard.cpp:1881
#: src/slic3r/GUI/ConfigWizard.cpp:1895
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
#: src/slic3r/GUI/GCodeViewer.cpp:3462 src/slic3r/GUI/GCodeViewer.cpp:3468
#: src/slic3r/GUI/GCodeViewer.cpp:3476 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:494
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:514
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1826
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1210
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1976
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:309
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:433
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:554
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:555
#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
#: src/slic3r/GUI/WipeTowerDialog.cpp:118 src/libslic3r/PrintConfig.cpp:276
#: src/libslic3r/PrintConfig.cpp:300 src/libslic3r/PrintConfig.cpp:307
#: src/libslic3r/PrintConfig.cpp:476 src/libslic3r/PrintConfig.cpp:632
#: src/libslic3r/PrintConfig.cpp:655 src/libslic3r/PrintConfig.cpp:722
#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:780
#: src/libslic3r/PrintConfig.cpp:900 src/libslic3r/PrintConfig.cpp:911
#: src/libslic3r/PrintConfig.cpp:929 src/libslic3r/PrintConfig.cpp:1110
#: src/libslic3r/PrintConfig.cpp:1293 src/libslic3r/PrintConfig.cpp:1357
#: src/libslic3r/PrintConfig.cpp:1367 src/libslic3r/PrintConfig.cpp:1657
#: src/libslic3r/PrintConfig.cpp:1848 src/libslic3r/PrintConfig.cpp:1909
#: src/libslic3r/PrintConfig.cpp:1927 src/libslic3r/PrintConfig.cpp:1945
#: src/libslic3r/PrintConfig.cpp:2003 src/libslic3r/PrintConfig.cpp:2013
#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2144
#: src/libslic3r/PrintConfig.cpp:2163 src/libslic3r/PrintConfig.cpp:2184
#: src/libslic3r/PrintConfig.cpp:2196 src/libslic3r/PrintConfig.cpp:2204
#: src/libslic3r/PrintConfig.cpp:2245 src/libslic3r/PrintConfig.cpp:2253
#: src/libslic3r/PrintConfig.cpp:2263 src/libslic3r/PrintConfig.cpp:2271
#: src/libslic3r/PrintConfig.cpp:2279 src/libslic3r/PrintConfig.cpp:2345
#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2652
#: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2766
#: src/libslic3r/PrintConfig.cpp:2775 src/libslic3r/PrintConfig.cpp:2821
#: src/libslic3r/PrintConfig.cpp:2910 src/libslic3r/PrintConfig.cpp:2922
#: src/libslic3r/PrintConfig.cpp:2948 src/libslic3r/PrintConfig.cpp:3075
#: src/libslic3r/PrintConfig.cpp:3163 src/libslic3r/PrintConfig.cpp:3170
#: src/libslic3r/PrintConfig.cpp:3177 src/libslic3r/PrintConfig.cpp:3191
#: src/libslic3r/PrintConfig.cpp:3234 src/libslic3r/PrintConfig.cpp:3244
#: src/libslic3r/PrintConfig.cpp:3254 src/libslic3r/PrintConfig.cpp:3404
#: src/libslic3r/PrintConfig.cpp:3413 src/libslic3r/PrintConfig.cpp:3422
#: src/libslic3r/PrintConfig.cpp:3432 src/libslic3r/PrintConfig.cpp:3465
#: src/libslic3r/PrintConfig.cpp:3508 src/libslic3r/PrintConfig.cpp:3518
#: src/libslic3r/PrintConfig.cpp:3530 src/libslic3r/PrintConfig.cpp:3550
#: src/libslic3r/PrintConfig.cpp:3565 src/libslic3r/PrintConfig.cpp:3575
#: src/libslic3r/PrintConfig.cpp:3718 src/libslic3r/PrintConfig.cpp:3755
#: src/libslic3r/PrintConfig.cpp:3956 src/libslic3r/PrintConfig.cpp:3971
#: src/libslic3r/PrintConfig.cpp:3985 src/libslic3r/PrintConfig.cpp:3996
#: src/libslic3r/PrintConfig.cpp:4009 src/libslic3r/PrintConfig.cpp:4054
#: src/libslic3r/PrintConfig.cpp:4064 src/libslic3r/PrintConfig.cpp:4073
#: src/libslic3r/PrintConfig.cpp:4083 src/libslic3r/PrintConfig.cpp:4099
#: src/libslic3r/PrintConfig.cpp:4123 src/libslic3r/PrintConfig.cpp:4150
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:66
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
"Diameter van het printbed. Aangenomen wordt dat het nulpunt in het midden "
"ligt."

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Rectangular"
msgstr "Rechthoekig"

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Circular"
msgstr "Rond"

#: src/slic3r/GUI/BedShapeDialog.cpp:81 src/libslic3r/ExtrusionRole.cpp:51
#: src/libslic3r/ExtrusionRole.cpp:85
msgid "Custom"
msgstr "Aangepast"

#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:182
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:222
#: src/slic3r/GUI/GUI_ObjectList.cpp:1804
msgid "Shape"
msgstr "Vorm"

#: src/slic3r/GUI/BedShapeDialog.cpp:131 src/slic3r/GUI/ConfigWizard.cpp:1780
msgid "Bed Shape"
msgstr "Bedvorm"

#: src/slic3r/GUI/BedShapeDialog.cpp:206
msgid "Load shape from STL..."
msgstr "Laad vorm van STL..."

#: src/slic3r/GUI/BedShapeDialog.cpp:252 src/slic3r/GUI/GCodeViewer.cpp:3924
#: src/slic3r/GUI/MainFrame.cpp:2241
msgid "Settings"
msgstr "Instellingen"

#: src/slic3r/GUI/BedShapeDialog.cpp:276
msgid "Texture"
msgstr "Textuur"

#: src/slic3r/GUI/BedShapeDialog.cpp:286 src/slic3r/GUI/BedShapeDialog.cpp:357
msgid "Load..."
msgstr "Laad..."

#: src/slic3r/GUI/BedShapeDialog.cpp:295 src/slic3r/GUI/BedShapeDialog.cpp:365
#: src/slic3r/GUI/Tab.cpp:4160
msgid "Remove"
msgstr "Verwijder"

#: src/slic3r/GUI/BedShapeDialog.cpp:320 src/slic3r/GUI/BedShapeDialog.cpp:391
msgid "Not found:"
msgstr "Niet gevonden:"

#: src/slic3r/GUI/BedShapeDialog.cpp:347
msgid "Model"
msgstr "Model"

#: src/slic3r/GUI/BedShapeDialog.cpp:509
msgid "Choose an STL file to import bed shape from:"
msgstr "Kies een .STL-bestand om te importeren als bedvorm:"

#: src/slic3r/GUI/BedShapeDialog.cpp:515 src/slic3r/GUI/BedShapeDialog.cpp:563
#: src/slic3r/GUI/BedShapeDialog.cpp:585
msgid "Invalid file format."
msgstr "Ongeldig bestandsformaat."

#: src/slic3r/GUI/BedShapeDialog.cpp:526
msgid "Error! Invalid model"
msgstr "Fout! Ongeldig model"

#: src/slic3r/GUI/BedShapeDialog.cpp:534
msgid "The selected file contains no geometry."
msgstr "Het geselecteerde bestand bevat geen geometrie."

#: src/slic3r/GUI/BedShapeDialog.cpp:538
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""
"Het geselecteerde model bevat meerdere losse delen. Dit wordt niet "
"ondersteund."

#: src/slic3r/GUI/BedShapeDialog.cpp:553
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr "Kies een bestand om te importeren als bedtextuur (PNG/SVG):"

#: src/slic3r/GUI/BedShapeDialog.cpp:575
msgid "Choose an STL file to import bed model from:"
msgstr "Kies een .STL-bestand om te importeren als bedvorm:"

#: src/slic3r/GUI/BonjourDialog.cpp:58
msgid "Network lookup"
msgstr "Netwerk zoeken"

#: src/slic3r/GUI/BonjourDialog.cpp:75 src/slic3r/GUI/BonjourDialog.cpp:253
msgid "Address"
msgstr "Adres"

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "Hostname"
msgstr "Hostnaam"

#: src/slic3r/GUI/BonjourDialog.cpp:77
msgid "Service name"
msgstr "Servicenaam"

#: src/slic3r/GUI/BonjourDialog.cpp:79
msgid "OctoPrint version"
msgstr "OctoPrint-versie"

#: src/slic3r/GUI/BonjourDialog.cpp:227
msgid "Searching for devices"
msgstr "Zoeken naar apparaten"

#: src/slic3r/GUI/BonjourDialog.cpp:234
msgid "Finished"
msgstr "Gereed"

#: src/slic3r/GUI/BonjourDialog.cpp:240
msgid "Multiple resolved IP addresses"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:249
#, boost-format
msgid ""
"There are several IP addresses resolving to hostname %1%.\n"
"Please select one that should be used."
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:21
msgid "Palette 1 (default)"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:22
msgid "Palette 2"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:23
msgid "Palette 3"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:24
msgid "Palette 4"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:25
msgid "Palette 5"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:26
msgid "Palette 6"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:27
msgid "Palette 7"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:28
msgid "Palette 8"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:112
msgid "Revert color to default"
msgstr "Zet kleur terug op standaard"

#: src/slic3r/GUI/ButtonsDescription.cpp:127
msgid "Value is the same as the system value"
msgstr "Waarde is niet gelijk aan systeemwaarde"

#: src/slic3r/GUI/ButtonsDescription.cpp:128
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""
"Waarde is veranderd en niet gelijk aan systeemwaarde of laatst opgeslagen "
"preset"

#: src/slic3r/GUI/ButtonsDescription.cpp:155
msgid "Default palette for mode markers"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2417
#: src/slic3r/GUI/wxExtensions.cpp:714
msgid "Simple"
msgstr "Eenvoudig"

#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2420
#: src/slic3r/GUI/wxExtensions.cpp:714
msgid "Expert"
msgstr "Expert"

#: src/slic3r/GUI/ButtonsDescription.cpp:182
msgid "Revert color"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:200
msgid "Buttons And Text Colors Description"
msgstr "Knoppen- en tekstkleurbeschrijving"

#: src/slic3r/GUI/ConfigManipulation.cpp:50
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""
"Laagdikte is niet geldig.\n"
"\n"
"De laagdikte wordt ingesteld op 0,01."

#: src/slic3r/GUI/ConfigManipulation.cpp:51
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1401
#: src/libslic3r/PrintConfig.cpp:296
msgid "Layer height"
msgstr "Laagdikte"

#: src/slic3r/GUI/ConfigManipulation.cpp:62
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""
"Laagdikte eerste laag is niet geldig.\n"
"\n"
"De laagdikte wordt ingesteld op 0,01."

#: src/slic3r/GUI/ConfigManipulation.cpp:63 src/libslic3r/PrintConfig.cpp:1289
msgid "First layer height"
msgstr "Laagdikte eerste laag"

#: src/slic3r/GUI/ConfigManipulation.cpp:82
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Detect thin walls disabled"
msgstr ""
"De spiraalmodus vereist:\n"
"- één perimeter\n"
"- geen dichte toplagen\n"
"- 0% vullingsdichtheid\n"
"- geen supportmateriaal\n"
"- 'Detecteer dunne wanden' uit"

#: src/slic3r/GUI/ConfigManipulation.cpp:89
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""
"Moeten deze instellingen aangepast worden om de spiraalmodus te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:90
msgid "Spiral Vase"
msgstr "Spiraalmodus"

#: src/slic3r/GUI/ConfigManipulation.cpp:121
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""
"De supportlagen moeten gesynchroniseerd worden om oplosbaar support\n"
"met het afveegblok te laten werken."

#: src/slic3r/GUI/ConfigManipulation.cpp:124
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""
"Moeten de supportlagen gesynchroniseerd worden met de overige lagen om het "
"afveegblok te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:125
#: src/slic3r/GUI/ConfigManipulation.cpp:143
msgid "Wipe Tower"
msgstr "Afveegblok"

#: src/slic3r/GUI/ConfigManipulation.cpp:138 src/libslic3r/Print.cpp:676
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"Het afveegblok ondersteunt alleen niet-oplosbaar support als dat geprint "
"worden met de huidige extruder zonder toolwissel (Zet zowel "
"'support_material_extruder' en 'support_material_interface_extruder' op 0)."

#: src/slic3r/GUI/ConfigManipulation.cpp:142
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""
"Moeten deze instellingen aangepast worden om het afveegblok te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:164
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""
"Support werkt beter als de volgende instellingen zijn geactiveerd:\n"
"- \"Detecteer brugperimeters\""

#: src/slic3r/GUI/ConfigManipulation.cpp:167
msgid "Shall I adjust those settings for supports?"
msgstr ""
"Moeten deze instellingen aangepast worden om supportmateriaal te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:168
msgid "Support Generator"
msgstr "Supportgenerator"

#: src/slic3r/GUI/ConfigManipulation.cpp:192
#, boost-format
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr "Het %1% vullingspatroon wordt niet ondersteunt bij 100%% dichtheid."

#: src/slic3r/GUI/ConfigManipulation.cpp:194
msgid "Shall I switch to rectilinear fill pattern?"
msgstr "Moet dit aangepast worden naar het rechtlijnig patroon?"

#: src/slic3r/GUI/ConfigManipulation.cpp:195
#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
#: src/slic3r/GUI/Plater.cpp:470 src/slic3r/GUI/Tab.cpp:1457
#: src/slic3r/GUI/Tab.cpp:1459 src/libslic3r/PrintConfig.cpp:491
#: src/libslic3r/PrintConfig.cpp:809 src/libslic3r/PrintConfig.cpp:829
#: src/libslic3r/PrintConfig.cpp:1185 src/libslic3r/PrintConfig.cpp:1198
#: src/libslic3r/PrintConfig.cpp:1223 src/libslic3r/PrintConfig.cpp:1443
#: src/libslic3r/PrintConfig.cpp:1480 src/libslic3r/PrintConfig.cpp:1544
#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:2404
#: src/libslic3r/PrintConfig.cpp:2421
msgid "Infill"
msgstr "Vulling"

#: src/slic3r/GUI/ConfigManipulation.cpp:348
msgid "Head penetration should not be greater than the head width."
msgstr "Koppenetratie mag niet groter zijn dan de kopbreedte."

#: src/slic3r/GUI/ConfigManipulation.cpp:350
msgid "Invalid Head penetration"
msgstr "Ongeldige koppenetratie"

#: src/slic3r/GUI/ConfigManipulation.cpp:361
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "Pinkopdiameter moet kleiner zijn dan de pijlerdiameter."

#: src/slic3r/GUI/ConfigManipulation.cpp:363
msgid "Invalid pinhead diameter"
msgstr "Ongeldige pinkopdiameter"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Upgrade"
msgstr "Upgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "Downgrade"
msgstr "Downgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
msgid "Before roll back"
msgstr "Voor terugrollen"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 src/libslic3r/PrintConfig.cpp:350
msgid "User"
msgstr "Gebruiker"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:30
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:855
#: src/libslic3r/ExtrusionRole.cpp:37
msgid "Unknown"
msgstr "Onbekend"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "Active"
msgstr "Actief"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "PrusaSlicer version"
msgstr "PrusaSlicer versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1485
msgid "print"
msgstr "print"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
msgid "filaments"
msgstr "filamenten"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1487
msgid "SLA print"
msgstr "SLA-print"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
#: src/slic3r/GUI/ConfigWizard.cpp:842 src/slic3r/GUI/GUI.cpp:331
#: src/slic3r/GUI/Plater.cpp:854 src/libslic3r/Preset.cpp:1488
msgid "SLA material"
msgstr "SLA-materiaal"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1489
msgid "printer"
msgstr "printer"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1318
msgid "vendor"
msgstr "leverancier"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "version"
msgstr "versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76
msgid "min PrusaSlicer version"
msgstr "min. PrusaSlicer versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "max PrusaSlicer version"
msgstr "max. PrusaSlicer versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "model"
msgstr "model"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "variants"
msgstr "varianten"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93
#, c-format, boost-format
msgid "Incompatible with this %s"
msgstr "Niet compatibel met deze %s"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96
msgid "Activate"
msgstr "Activeer"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123
msgid "Configuration Snapshots"
msgstr "Configuratieopnamen"

#: src/slic3r/GUI/ConfigWizard.cpp:336
msgid "nozzle"
msgstr "nozzle"

#: src/slic3r/GUI/ConfigWizard.cpp:340
msgid "Alternate nozzles:"
msgstr "Overige nozzles:"

#: src/slic3r/GUI/ConfigWizard.cpp:404
msgid "All standard"
msgstr "Alle standaard"

#: src/slic3r/GUI/ConfigWizard.cpp:404
msgid "Standard"
msgstr "Standaard"

#: src/slic3r/GUI/ConfigWizard.cpp:405 src/slic3r/GUI/ConfigWizard.cpp:726
#: src/slic3r/GUI/FileArchiveDialog.cpp:264
#: src/slic3r/GUI/FileArchiveDialog.cpp:286 src/slic3r/GUI/Preferences.cpp:527
#: src/slic3r/GUI/Tab.cpp:4245 src/slic3r/GUI/UnsavedChangesDialog.cpp:1164
msgid "All"
msgstr "Alles"

#: src/slic3r/GUI/ConfigWizard.cpp:406 src/slic3r/GUI/ConfigWizard.cpp:727
#: src/slic3r/GUI/DoubleSlider.cpp:2099
#: src/slic3r/GUI/FileArchiveDialog.cpp:268
#: src/slic3r/GUI/FileArchiveDialog.cpp:286
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1983 src/slic3r/GUI/Plater.cpp:441
#: src/slic3r/GUI/Plater.cpp:596 src/slic3r/GUI/Preferences.cpp:529
#: src/libslic3r/PrintConfig.cpp:1345
msgid "None"
msgstr "Geen"

#: src/slic3r/GUI/ConfigWizard.cpp:558
#, c-format, boost-format
msgid "Welcome to the %s Configuration Assistant"
msgstr "Welkom bij de %s configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:560
#, c-format, boost-format
msgid "Welcome to the %s Configuration Wizard"
msgstr "Welkom bij de %s configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:562
msgid "Welcome"
msgstr "Welkom"

#: src/slic3r/GUI/ConfigWizard.cpp:564
#, c-format, boost-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""
"Hallo, welkom bij %s! Deze %s helpt u bij de eerste configuratie; nog een "
"paar stappen te gaan en u bent klaar om te printen."

#: src/slic3r/GUI/ConfigWizard.cpp:569
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr "Verwijder gebruikersprofielen (vooraf wordt een snapshot gemaakt)"

#: src/slic3r/GUI/ConfigWizard.cpp:572
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr ""
"Voer desktopintegratie uit (stel in op binair zodat deze door het systeem "
"gezocht kan worden)."

#: src/slic3r/GUI/ConfigWizard.cpp:624
#, c-format, boost-format
msgid "%s Family"
msgstr "%s serie"

#: src/slic3r/GUI/ConfigWizard.cpp:715
msgid "Printer:"
msgstr "Printer:"

#: src/slic3r/GUI/ConfigWizard.cpp:717
msgid "Vendor:"
msgstr "Leverancier:"

#: src/slic3r/GUI/ConfigWizard.cpp:718
msgid "Profile:"
msgstr "Profiel:"

#: src/slic3r/GUI/ConfigWizard.cpp:795 src/slic3r/GUI/ConfigWizard.cpp:986
#: src/slic3r/GUI/ConfigWizard.cpp:1072 src/slic3r/GUI/ConfigWizard.cpp:1211
msgid "(All)"
msgstr "(Alles)"

#: src/slic3r/GUI/ConfigWizard.cpp:799 src/slic3r/GUI/ConfigWizard.cpp:1213
msgid "(Templates)"
msgstr ""

#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
#: src/slic3r/GUI/ConfigWizard.cpp:835
#, boost-format
msgid ""
"%1% visible for <b>(\"Template\")</b> printer are universal profiles "
"available for all printers. These might not be compatible with your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:835 src/slic3r/GUI/ConfigWizard.cpp:838
#: src/slic3r/GUI/ConfigWizard.cpp:2459 src/slic3r/GUI/ConfigWizard.cpp:3413
msgid "Filaments"
msgstr "Filamenten"

#: src/slic3r/GUI/ConfigWizard.cpp:835 src/slic3r/GUI/ConfigWizard.cpp:838
msgid "SLA materials"
msgstr "SLA materialen"

#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
#: src/slic3r/GUI/ConfigWizard.cpp:838
#, boost-format
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""
"%1% gemarkeerd met <b>*</b> zijn <b>niet</b> compatibel met sommige "
"geïnstalleerde printers."

#. TRN ConfigWizard: Materials : "%1%" = "filament"/"SLA material"
#: src/slic3r/GUI/ConfigWizard.cpp:842
#, boost-format
msgid "All installed printers are compatible with the selected %1%."
msgstr "Alle geïnstalleerde printers zijn compatibel met de geselecteerde %1%."

#: src/slic3r/GUI/ConfigWizard.cpp:842 src/libslic3r/Preset.cpp:1486
msgid "filament"
msgstr "filament"

#: src/slic3r/GUI/ConfigWizard.cpp:866
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr ""
"Alleen de volgende geïnstalleerde printers zijn compatibel met de "
"geselecteerde filamenten"

#: src/slic3r/GUI/ConfigWizard.cpp:867
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr ""
"Alleen de volgende geïnstalleerde printers zijn compatibel met de "
"geselecteerde SLA materialen"

#: src/slic3r/GUI/ConfigWizard.cpp:1261
msgid ""
"You have selected template filament. Please note that these filaments are "
"available for all printers but are NOT certain to be compatible with your "
"printer. Do you still wish to have this filament selected?\n"
"(This message won't be displayed again.)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/ConfigWizard.cpp:2769
#: src/slic3r/GUI/ConfigWizard.cpp:2909 src/slic3r/GUI/DoubleSlider.cpp:2591
#: src/slic3r/GUI/DoubleSlider.cpp:2612 src/slic3r/GUI/GUI.cpp:245
#: src/slic3r/GUI/GUI_App.cpp:3447 src/slic3r/GUI/UpdateDialogs.cpp:204
#: src/slic3r/GUI/UpdateDialogs.cpp:212 src/slic3r/GUI/UpdateDialogs.cpp:217
#: src/slic3r/GUI/UpdateDialogs.cpp:222 src/slic3r/GUI/UpdateDialogs.cpp:229
#: src/slic3r/GUI/UpdateDialogs.cpp:234
msgid "Notice"
msgstr "Let op"

#: src/slic3r/GUI/ConfigWizard.cpp:1310
msgid "Custom Printer Setup"
msgstr "Custom printersetup"

#: src/slic3r/GUI/ConfigWizard.cpp:1310
msgid "Custom Printer"
msgstr "Custom printer"

#: src/slic3r/GUI/ConfigWizard.cpp:1312
msgid "Define a custom printer profile"
msgstr "Definieer een custom printerprofiel"

#: src/slic3r/GUI/ConfigWizard.cpp:1313
msgid "Custom profile name:"
msgstr "Custom profielnaam:"

#: src/slic3r/GUI/ConfigWizard.cpp:1330
msgid "Automatic updates"
msgstr "Automatische updates"

#: src/slic3r/GUI/ConfigWizard.cpp:1330
msgid "Updates"
msgstr "Updates"

#: src/slic3r/GUI/ConfigWizard.cpp:1338
msgid "Check for application updates"
msgstr "Controleer op programma-updates"

#: src/slic3r/GUI/ConfigWizard.cpp:1342
#, c-format, boost-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"%s controleert naar nieuwe versies online als dit is ingeschakeld. Als een "
"nieuwe versie beschikbaar komt, wordt bij de volgende keer opstarten een "
"melding getoond (nooit tijdens gebruik). Dit is slechts een melding."

#: src/slic3r/GUI/ConfigWizard.cpp:1348 src/slic3r/GUI/Preferences.cpp:288
msgid "Update built-in Presets automatically"
msgstr "Update ingebouwde presets automatisch"

#: src/slic3r/GUI/ConfigWizard.cpp:1352
#, c-format, boost-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Als dit aanstaat download %s updates op ingebouwde presets in de "
"achtergrond. De updates worden in een tijdelijke locatie opgeslagen. Wanneer "
"een nieuwe preset beschikbaar komt, wordt een melding getoond tijdens het "
"opstarten."

#: src/slic3r/GUI/ConfigWizard.cpp:1355
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"Updates worden nooit toegepast zonder toestemming van de gebruiker en zullen "
"nooit aangepaste instellingen overschrijven."

#: src/slic3r/GUI/ConfigWizard.cpp:1360
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Daarnaast wordt een backup-opname van de hele configuratie gemaakt voor een "
"update wordt toegepast."

#: src/slic3r/GUI/ConfigWizard.cpp:1409 src/slic3r/GUI/Preferences.cpp:1119
msgid "Download path"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1414 src/slic3r/GUI/FirmwareDialog.cpp:815
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:300
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
msgid "Browse"
msgstr "Zoek"

#: src/slic3r/GUI/ConfigWizard.cpp:1419
msgid "Choose folder"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Downloads from URL"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Downloads"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1465
msgid "Allow built-in downloader"
msgstr ""

#. TRN ConfigWizard : Downloader : %1% = "PrusaSlicer"
#: src/slic3r/GUI/ConfigWizard.cpp:1472
#, boost-format
msgid ""
"If enabled, %1% registers to start on custom URL on www.printables.com. You "
"will be able to use button with %1% logo to open models in this %1%. The "
"model will be downloaded into folder you choose bellow."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1479
msgid ""
"On Linux systems the process of registration also creates desktop "
"integration files for this version of application."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1506
msgid "Chosen directory for downloads does not exist."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1593 src/slic3r/GUI/GUI_Factories.cpp:818
#: src/slic3r/GUI/Plater.cpp:3751
msgid "Reload from disk"
msgstr "Herlaad van schijf"

#: src/slic3r/GUI/ConfigWizard.cpp:1596
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""
"Exporteer volledige padnaam van modellen en bronnen in .3MF- en .AMF-"
"bestanden"

#: src/slic3r/GUI/ConfigWizard.cpp:1600
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""
"Sta toe om bestanden automatisch te vinden bij het herladen van de schijf "
"als dit is ingeschakeld.\n"
"Als dit niet is geactiveerd vraagt het programma elke bestand apart te "
"selecteren."

#: src/slic3r/GUI/ConfigWizard.cpp:1609
msgid "Files association"
msgstr "Bestandsassociatie"

#: src/slic3r/GUI/ConfigWizard.cpp:1611 src/slic3r/GUI/Preferences.cpp:274
msgid "Associate .3mf files to PrusaSlicer"
msgstr "Open .3MF-bestanden met PrusaSlicer"

#: src/slic3r/GUI/ConfigWizard.cpp:1612 src/slic3r/GUI/Preferences.cpp:279
msgid "Associate .stl files to PrusaSlicer"
msgstr "Open .STL-bestanden met PrusaSlicer"

#: src/slic3r/GUI/ConfigWizard.cpp:1622
msgid "View mode"
msgstr "Toon modus"

#: src/slic3r/GUI/ConfigWizard.cpp:1624
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""
"De interface van PrusaSlicer kent drie varianten:\n"
"Eenvoudig, Geavanceerd en Expert.\n"
"De eenvoudige modus toont alleen de meest frequent gebruikte instellingen. "
"De andere twee tonen meer geavanceerdere instellingen voor het fine-tunen. "
"Ze zijn van toepassing voor respectievelijk experts en gevorderden."

#: src/slic3r/GUI/ConfigWizard.cpp:1629
msgid "Simple mode"
msgstr "Eenvoudige modus"

#: src/slic3r/GUI/ConfigWizard.cpp:1630
msgid "Advanced mode"
msgstr "Geavanceerde modus"

#: src/slic3r/GUI/ConfigWizard.cpp:1631
msgid "Expert mode"
msgstr "Expertmodus"

#: src/slic3r/GUI/ConfigWizard.cpp:1644
msgid "The size of the object can be specified in inches"
msgstr "De maten van het object kunnen worden ingesteld op inches"

#: src/slic3r/GUI/ConfigWizard.cpp:1645
msgid "Use inches"
msgstr "Gebruik inches"

#: src/slic3r/GUI/ConfigWizard.cpp:1665
msgid "Other Vendors"
msgstr "Overige leveranciers"

#: src/slic3r/GUI/ConfigWizard.cpp:1669
#, c-format, boost-format
msgid "Pick another vendor supported by %s"
msgstr "Kies een andere leverancier die ondersteund wordt door %s"

#: src/slic3r/GUI/ConfigWizard.cpp:1702
msgid "Firmware Type"
msgstr "Firmwaretype"

#: src/slic3r/GUI/ConfigWizard.cpp:1702 src/slic3r/GUI/Tab.cpp:2473
msgid "Firmware"
msgstr "Firmware"

#: src/slic3r/GUI/ConfigWizard.cpp:1706
msgid "Choose the type of firmware used by your printer."
msgstr "Kies het type firmware dat de printer gebruikt."

#: src/slic3r/GUI/ConfigWizard.cpp:1755 src/slic3r/GUI/ConfigWizard.cpp:1827
#: src/slic3r/GUI/ConfigWizard.cpp:1832 src/slic3r/GUI/ConfigWizard.cpp:1837
#: src/slic3r/GUI/Field.cpp:258 src/slic3r/GUI/Field.cpp:328
#: src/slic3r/GUI/Field.cpp:1585 src/slic3r/GUI/GUI_ObjectLayers.cpp:435
msgid "Invalid numeric input."
msgstr "Ongeldige numerieke invoer."

#: src/slic3r/GUI/ConfigWizard.cpp:1780
msgid "Bed Shape and Size"
msgstr "Bedvorm en -grootte"

#: src/slic3r/GUI/ConfigWizard.cpp:1783
msgid "Set the shape of your printer's bed."
msgstr "Stel de vorm van het printbed in."

#. TRN ConfigWizard : Size of possible print, related on printer size
#: src/slic3r/GUI/ConfigWizard.cpp:1804
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1834
msgid "Build Volume"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1807
msgid "Set the printer height."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1844 src/libslic3r/PrintConfig.cpp:305
msgid "Max print height"
msgstr "Maximale printhoogte"

#: src/slic3r/GUI/ConfigWizard.cpp:1862
msgid "Filament and Nozzle Diameters"
msgstr "Filament en nozzle diameters"

#: src/slic3r/GUI/ConfigWizard.cpp:1862
msgid "Print Diameters"
msgstr "Printdiameter"

#: src/slic3r/GUI/ConfigWizard.cpp:1877
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "Voer de diameter van de nozzle in."

#: src/slic3r/GUI/ConfigWizard.cpp:1880
msgid "Nozzle Diameter"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1890
msgid "Enter the diameter of your filament."
msgstr "Voer de diameter van het filament in."

#: src/slic3r/GUI/ConfigWizard.cpp:1891
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"Goede nauwkeurigheid is van belang. Gebruik dus een schuifmaat en doe "
"verschillende metingen op het filament. Bereken dan het gemiddelde."

#: src/slic3r/GUI/ConfigWizard.cpp:1894
msgid "Filament Diameter"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1952
msgid "Nozzle and Bed Temperatures"
msgstr "Nozzle- en bedtemperaturen"

#: src/slic3r/GUI/ConfigWizard.cpp:1952
msgid "Temperatures"
msgstr "Temperaturen"

#: src/slic3r/GUI/ConfigWizard.cpp:1968
msgid "Enter the temperature needed for extruding your filament."
msgstr "Voer de temperatuur in die nodig is om filament te extruderen."

#: src/slic3r/GUI/ConfigWizard.cpp:1969
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "Een vuistregel is 180 tot 230 °C voor PLA en 230 tot 260 °C voor ABS."

#: src/slic3r/GUI/ConfigWizard.cpp:1972
msgid "Extrusion Temperature:"
msgstr "Extrusietemperatuur:"

#: src/slic3r/GUI/ConfigWizard.cpp:1973 src/slic3r/GUI/ConfigWizard.cpp:1987
#: src/libslic3r/PrintConfig.cpp:435 src/libslic3r/PrintConfig.cpp:1269
#: src/libslic3r/PrintConfig.cpp:1324 src/libslic3r/PrintConfig.cpp:2986
#: src/libslic3r/PrintConfig.cpp:3763
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:1982
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""
"Voer de bedtemperatuur in die nodig is om filament aan het bed te laten "
"hechten."

#: src/slic3r/GUI/ConfigWizard.cpp:1983
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"Een vuistregel is 60 °C voor PLA en 110 °C voor ABS. Laat op 0 staan als er "
"geen verwarmd bed is."

#: src/slic3r/GUI/ConfigWizard.cpp:1986
msgid "Bed Temperature"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2459 src/slic3r/GUI/ConfigWizard.cpp:3416
msgid "SLA Materials"
msgstr "SLA materialen"

#: src/slic3r/GUI/ConfigWizard.cpp:2513
msgid "FFF Technology Printers"
msgstr "FFF-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:2518
msgid "SLA Technology Printers"
msgstr "SLA-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:2767
#, boost-format
msgid ""
"Following printer profiles has no default filament: %1%Please select one "
"manually."
msgstr ""
"De volgende printerprofielen hebben geen standaard filament: %1%Kies "
"alstublieft een handmatig."

#: src/slic3r/GUI/ConfigWizard.cpp:2768
#, boost-format
msgid ""
"Following printer profiles has no default material: %1%Please select one "
"manually."
msgstr ""
"De volgende printerprofielen hebben geen standaard materiaal: %1%Kies "
"alstublieft een handmatig."

#: src/slic3r/GUI/ConfigWizard.cpp:2932
msgid "The following FFF printer models have no filament selected:"
msgstr "Er is geen filament geselecteerd voor de volgende FFF-printers:"

#: src/slic3r/GUI/ConfigWizard.cpp:2936
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr "Wil je standaardfilamenten selecteren voor deze FFF-printers?"

#: src/slic3r/GUI/ConfigWizard.cpp:2950
msgid "The following SLA printer models have no materials selected:"
msgstr "Er is geen materiaal geselecteerd voor de volgende SLA-printers:"

#: src/slic3r/GUI/ConfigWizard.cpp:2954
msgid "Do you want to select default SLA materials for these printer models?"
msgstr "Wil je standard SLA-materialen selecteren voor deze printers?"

#: src/slic3r/GUI/ConfigWizard.cpp:2996
msgid "Configuration is edited in ConfigWizard"
msgstr "Configuratie is gewijzigd in ConfigWizard"

#: src/slic3r/GUI/ConfigWizard.cpp:3049
msgid "All user presets will be deleted."
msgstr "Alle presets van de gebruiker worden verwijderd."

#: src/slic3r/GUI/ConfigWizard.cpp:3086
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] ""
"Een nieuwe leverancier is geïnstalleerd en één van diens printers zal worden "
"geactiveerd"
msgstr[1] ""
"Nieuwe leveranciers zijn geïnstalleerd en één van diens printers zal worden "
"geactiveerd"

#: src/slic3r/GUI/ConfigWizard.cpp:3118
msgid "Do you want to continue changing the configuration?"
msgstr "Wil je doorgaan met het wijzigen van de configuratie?"

#: src/slic3r/GUI/ConfigWizard.cpp:3185
msgid "A new Printer was installed and it will be activated."
msgstr "Een nieuwe printer is geïnstalleerd en zal worden geactiveerd."

#: src/slic3r/GUI/ConfigWizard.cpp:3190
msgid "Some Printers were uninstalled."
msgstr "Sommige printers zijn verwijderd."

#: src/slic3r/GUI/ConfigWizard.cpp:3211
msgid "A new filament was installed and it will be activated."
msgstr "Een nieuw filament is geïnstalleerd en zal worden geactiveerd."

#: src/slic3r/GUI/ConfigWizard.cpp:3212
msgid "A new SLA material was installed and it will be activated."
msgstr "Een niet SLA-materiaal is geïnstalleerd en zal worden geactiveerd."

#: src/slic3r/GUI/ConfigWizard.cpp:3225
msgid "Some filaments were uninstalled."
msgstr "Sommige filamenten zijn verwijderd."

#: src/slic3r/GUI/ConfigWizard.cpp:3225
msgid "Some SLA materials were uninstalled."
msgstr "Sommige SLA-materialen zijn verwijderd."

#: src/slic3r/GUI/ConfigWizard.cpp:3269
msgid "Custom printer was installed and it will be activated."
msgstr "Custom printer is geïnstalleerd en zal worden geactiveerd."

#: src/slic3r/GUI/ConfigWizard.cpp:3359
msgid "Select all standard printers"
msgstr "Select alle standaardprinters"

#: src/slic3r/GUI/ConfigWizard.cpp:3362
msgid "< &Back"
msgstr "< Terug"

#: src/slic3r/GUI/ConfigWizard.cpp:3363
msgid "&Next >"
msgstr "Volgende >"

#: src/slic3r/GUI/ConfigWizard.cpp:3364
msgid "&Finish"
msgstr "Voltooi"

#: src/slic3r/GUI/ConfigWizard.cpp:3365
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:657
#: src/slic3r/GUI/FileArchiveDialog.cpp:277
#: src/slic3r/GUI/FileArchiveDialog.cpp:286
#: src/slic3r/GUI/FirmwareDialog.cpp:153
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1817
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2180
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2269
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1364
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:96
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:909
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1611
msgid "Cancel"
msgstr "Annuleren"

#: src/slic3r/GUI/ConfigWizard.cpp:3385
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:3393
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:3413
msgid "Filament Profiles Selection"
msgstr "Filament profielselectie"

#: src/slic3r/GUI/ConfigWizard.cpp:3413 src/slic3r/GUI/ConfigWizard.cpp:3416
#: src/slic3r/GUI/GUI_ObjectList.cpp:4369
msgid "Type:"
msgstr "Type:"

#: src/slic3r/GUI/ConfigWizard.cpp:3416
msgid "SLA Material Profiles Selection"
msgstr "SLA-materiaal profielselectie"

#: src/slic3r/GUI/ConfigWizard.cpp:3539
msgid "Configuration Assistant"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:3540
msgid "Configuration &Assistant"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:3542
msgid "Configuration Wizard"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:3543
msgid "Configuration &Wizard"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr ""
"Uitvoeren van desktopintegratie mislukt - boost::filesystem::canonical gaf "
"geen appimage pad terug."

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
msgid "Performing desktop integration failed - Could not find executable."
msgstr "Uitvoeren van desktopintegratie mislukt - kon executable niet vinden."

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:383
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr ""
"Uitvoeren van desktopintegratie mislukt omdat de locatie van het programma "
"niet is gevonden."

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:423
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""
"Uitvoeren van desktopintegratie mislukt - kon geen Gcodeviewer-"
"desktopbestand aanmaken. PrusaSlicer-desktopbestand is mogelijk succesvol "
"aangemaakt."

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:472
msgid ""
"Performing downloader desktop integration failed - boost::filesystem::"
"canonical did not return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:484
msgid ""
"Performing downloader desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:602
msgid ""
"Performing downloader desktop integration failed because the application "
"directory was not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:626
#: src/slic3r/GUI/GUI_App.cpp:2402
msgid "Desktop Integration"
msgstr "Desktopintegratie"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:633
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""
"Desktopintegratie zet deze binary om het te laten vinden door het systeem.\n"
"\n"
"Druk op \"Uitvoeren\" om door te gaan."

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:647
msgid "Perform"
msgstr "Uitvoeren"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:653
#: src/slic3r/GUI/GLCanvas3D.cpp:5506 src/slic3r/GUI/KBShortcutsDialog.cpp:106
#: src/slic3r/GUI/MainFrame.cpp:1426
msgid "Undo"
msgstr "Maak ongedaan"

#: src/slic3r/GUI/DoubleSlider.cpp:109
msgid "Place bearings in slots and resume printing"
msgstr "Plaats lagers in gleuven en ga door met printen"

#: src/slic3r/GUI/DoubleSlider.cpp:711 src/libslic3r/Utils.cpp:1015
#, boost-format
msgid "%1%d"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:712 src/libslic3r/Utils.cpp:1016
#, boost-format
msgid "%1%h"
msgstr ""

#. TRN "m" means "minutes"
#: src/slic3r/GUI/DoubleSlider.cpp:713 src/libslic3r/Utils.cpp:1018
#, boost-format
msgid "%1%m"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:714 src/libslic3r/Utils.cpp:1026
#, boost-format
msgid "%1%s"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1448
msgid "One layer mode"
msgstr "Enkele-laagsmodus"

#: src/slic3r/GUI/DoubleSlider.cpp:1450
msgid "Discard all custom changes"
msgstr "Verwijder alle wijzigingen"

#: src/slic3r/GUI/DoubleSlider.cpp:1454 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to move"
msgstr "Ga naar beweging"

#: src/slic3r/GUI/DoubleSlider.cpp:1457
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""
"Ga naar hoogte %s\n"
"Stel meetlintmodus in\n"
"of stel extrudervolgorde in voor de gehele print"

#: src/slic3r/GUI/DoubleSlider.cpp:1460
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""
"Ga naar hoogte %s\n"
"of stel meetlintmodus in"

#: src/slic3r/GUI/DoubleSlider.cpp:1465
msgid "Edit current color - Right click the colored slider segment"
msgstr ""
"Huidige kleur aanpassen - rechtermuisklik op het gekleurde schuifsegment"

#: src/slic3r/GUI/DoubleSlider.cpp:1467
msgid "This is wipe tower layer"
msgstr "Dit is de afveegblok-laag"

#: src/slic3r/GUI/DoubleSlider.cpp:1477
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing sequentually."
msgstr ""
"Het achtereenvolgens printen staat aan.\n"
"Het is onmogelijk om custom G-codes toe te voegen voor het achtereenvolgens "
"printen van objecten."

#: src/slic3r/GUI/DoubleSlider.cpp:1481
msgid "Print mode"
msgstr "Printmodus"

#: src/slic3r/GUI/DoubleSlider.cpp:1495
msgid "Add extruder change - Left click"
msgstr "Voeg extruderwissel toe - linkermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1497
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""
"Kleurwissel toevoegen: linkermuisklik voor ingestelde kleur of shift + "
"linkermuisklik voor aangepaste kleurselectie"

#: src/slic3r/GUI/DoubleSlider.cpp:1499
msgid "Add color change - Left click"
msgstr "Kleurwissel toevoegen: linkermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1500
msgid "or press \"+\" key"
msgstr "of druk op de \"+\"-toets"

#: src/slic3r/GUI/DoubleSlider.cpp:1502
msgid "Add another code - Ctrl + Left click"
msgstr "Voeg andere code toe: Ctrl + linkermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1503
msgid "Add another code - Right click"
msgstr "Voeg andere code toe: rechtermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1509
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Het achtereenvolgens printen staat aan.\n"
"Het is niet mogelijk om custom G-codes aan objecten toe te voegen voor het "
"achtereenvolgens printen.\n"
"Deze code wordt niet uitgevoerd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1527
msgid "continue"
msgstr "doorgaan"

#: src/slic3r/GUI/DoubleSlider.cpp:1535
#, boost-format
msgid "Color change (\"%1%\")"
msgstr "Kleurwissel (%1%)"

#: src/slic3r/GUI/DoubleSlider.cpp:1536
#, boost-format
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr "Kleurwissel (%1%) voor extruder %2%"

#: src/slic3r/GUI/DoubleSlider.cpp:1538
#, boost-format
msgid "Pause print (\"%1%\")"
msgstr "Pauzeer print (%1%)"

#: src/slic3r/GUI/DoubleSlider.cpp:1540
#, boost-format
msgid "Custom template (\"%1%\")"
msgstr "Aangepaste template (\"%1%\")"

#: src/slic3r/GUI/DoubleSlider.cpp:1542
#, boost-format
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr "Extruder (tool) is veranderd naar extruder %1%"

#: src/slic3r/GUI/DoubleSlider.cpp:1549
msgid "Note"
msgstr "Let op"

#: src/slic3r/GUI/DoubleSlider.cpp:1551
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""
"De G-code die is gekoppeld aan deze markering is in strijd met de "
"printmodus.\n"
"Dit aanpassen zal de gegevens van de schuif ook wijzigen."

#: src/slic3r/GUI/DoubleSlider.cpp:1554
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Er is een kleurwissel voor een extruder die niet wordt gebruikt tot het eind "
"van de print.\n"
"Deze code wordt niet toegevoegd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1557
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Er is een extruderwissel naar dezelfde extruder ingesteld.\n"
"Deze code wordt niet toegevoegd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1560
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""
"Er is een kleurwissel voor een extruder die niet eerder gebruikt is.\n"
"Controleer de instellingen om overbodige kleurwisselingen te voorkomen."

#: src/slic3r/GUI/DoubleSlider.cpp:1565
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr "Verwijder markering; linkermuisknop of druk op de '-'-knop"

#: src/slic3r/GUI/DoubleSlider.cpp:1567
msgid "Edit tick mark - Ctrl + Left click"
msgstr "Bewerk markering; CTRL + linkermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:1568
msgid "Edit tick mark - Right click"
msgstr "Bewerk markering; rechtermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:1671 src/slic3r/GUI/DoubleSlider.cpp:1702
#: src/slic3r/GUI/GUI_Factories.cpp:870
#, c-format, boost-format
msgid "Extruder %d"
msgstr "Extruder %d"

#: src/slic3r/GUI/DoubleSlider.cpp:1672 src/slic3r/GUI/GUI_Factories.cpp:871
msgid "active"
msgstr "actief"

#: src/slic3r/GUI/DoubleSlider.cpp:1681
msgid "Switch code to Change extruder"
msgstr "Code om van extruder te wisselen"

#: src/slic3r/GUI/DoubleSlider.cpp:1681 src/slic3r/GUI/GUI_Factories.cpp:832
msgid "Change extruder"
msgstr "Wissel extruder"

#: src/slic3r/GUI/DoubleSlider.cpp:1682
msgid "Change extruder (N/A)"
msgstr "Wissel extruder (n.v.t.)"

#: src/slic3r/GUI/DoubleSlider.cpp:1684 src/slic3r/GUI/GUI_Factories.cpp:879
msgid "Use another extruder"
msgstr "Gebruik een andere extruder"

#: src/slic3r/GUI/DoubleSlider.cpp:1703
msgid "used"
msgstr "gebruikt"

#: src/slic3r/GUI/DoubleSlider.cpp:1711
#, boost-format
msgid "Switch code to Color change (%1%) for:"
msgstr "Code om naar kleur %1% te wisselen voor:"

#: src/slic3r/GUI/DoubleSlider.cpp:1712
#, boost-format
msgid "Add color change (%1%) for:"
msgstr "Kleurwissel (%1%) toevoegen voor:"

#: src/slic3r/GUI/DoubleSlider.cpp:2037
msgid "Add color change"
msgstr "Kleurwissel toevoegen"

#: src/slic3r/GUI/DoubleSlider.cpp:2048
msgid "Add pause print"
msgstr "Voeg printpauze toe"

#: src/slic3r/GUI/DoubleSlider.cpp:2052
msgid "Add custom template"
msgstr "Voeg aangepaste template toe"

#: src/slic3r/GUI/DoubleSlider.cpp:2055
msgid "Add custom G-code"
msgstr "Custom G-code toevoegen"

#: src/slic3r/GUI/DoubleSlider.cpp:2073
msgid "Edit color"
msgstr "Bewerk kleur"

#: src/slic3r/GUI/DoubleSlider.cpp:2074
msgid "Edit pause print message"
msgstr "Bewerk printpauze-bericht"

#: src/slic3r/GUI/DoubleSlider.cpp:2075
msgid "Edit custom G-code"
msgstr "Bewerk custom G-code"

#: src/slic3r/GUI/DoubleSlider.cpp:2081
msgid "Delete color change"
msgstr "Verwijder kleurwissel"

#: src/slic3r/GUI/DoubleSlider.cpp:2082
msgid "Delete tool change"
msgstr "Verwijder toolwissel"

#: src/slic3r/GUI/DoubleSlider.cpp:2083
msgid "Delete pause print"
msgstr "Verwijder printpauze"

#: src/slic3r/GUI/DoubleSlider.cpp:2084
msgid "Delete custom G-code"
msgstr "Verwijder custom G-code"

#: src/slic3r/GUI/DoubleSlider.cpp:2094 src/slic3r/GUI/DoubleSlider.cpp:2324
msgid "Jump to height"
msgstr "Ga naar hoogte"

#: src/slic3r/GUI/DoubleSlider.cpp:2099
msgid "Hide ruler"
msgstr "Verberg meetlint"

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height"
msgstr "Toon objecthoogte"

#: src/slic3r/GUI/DoubleSlider.cpp:2103
msgid "Show object height on the ruler"
msgstr "Toon objecthoogte op het meetlint"

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time"
msgstr "Toon geschatte printtijd"

#: src/slic3r/GUI/DoubleSlider.cpp:2107
msgid "Show estimated print time on the ruler"
msgstr "Toon geschatte printtijd op het meetlint"

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Ruler mode"
msgstr "Meetlintmodus"

#: src/slic3r/GUI/DoubleSlider.cpp:2111
msgid "Set ruler mode"
msgstr "Stel meetlintmodus in"

#: src/slic3r/GUI/DoubleSlider.cpp:2116
msgid "Set extruder sequence for the entire print"
msgstr "Stel extrudervolgorde in voor de hele print"

#: src/slic3r/GUI/DoubleSlider.cpp:2120
msgid "Set auto color changes"
msgstr "Stel automatische kleurwisseling in"

#: src/slic3r/GUI/DoubleSlider.cpp:2155
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr ""
"Deze actie veroorzaakt een verwijdering van alle punten op de verticale "
"slider."

#: src/slic3r/GUI/DoubleSlider.cpp:2156 src/slic3r/GUI/Tab.cpp:1270
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""
"Deze actie is niet terug te draaien.\n"
"Wilt u doorgaan?"

#: src/slic3r/GUI/DoubleSlider.cpp:2157
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2491
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:539
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1124 src/slic3r/GUI/GUI.cpp:258
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:716
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:746
#: src/slic3r/GUI/WipeTowerDialog.cpp:60 src/slic3r/GUI/WipeTowerDialog.cpp:445
msgid "Warning"
msgstr "Waarschuwing"

#: src/slic3r/GUI/DoubleSlider.cpp:2285
msgid "Enter custom G-code used on current layer"
msgstr "Voer custom G-code in voor de huidige laag"

#: src/slic3r/GUI/DoubleSlider.cpp:2286
#, boost-format
msgid "Custom G-code on current layer (%1% mm)."
msgstr "Custom G-code voor huidige laag (%1% mm)."

#: src/slic3r/GUI/DoubleSlider.cpp:2307
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""
"Voer een kort bericht in om te tonen op het printscherm tijdens een pauze"

#: src/slic3r/GUI/DoubleSlider.cpp:2308
#, boost-format
msgid "Message for pause print on current layer (%1% mm)."
msgstr "Kort bericht voor printpauze bij huidige laag (%1% mm)."

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the move you want to jump to"
msgstr "Voer de beweging in waar u naartoe wilt"

#: src/slic3r/GUI/DoubleSlider.cpp:2323
msgid "Enter the height you want to jump to"
msgstr "Voer de hoogte in waar u naartoe wilt"

#: src/slic3r/GUI/DoubleSlider.cpp:2584
msgid "The last color change data was saved for a single extruder printing."
msgstr ""
"De laatste gegevens van de kleurwissel zijn opgeslagen voor enkel-"
"extruderprinters."

#: src/slic3r/GUI/DoubleSlider.cpp:2585 src/slic3r/GUI/DoubleSlider.cpp:2601
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""
"De laatste gegevens van de kleurwissel zijn opgeslagen voor een multi-"
"extruderprinter."

#: src/slic3r/GUI/DoubleSlider.cpp:2587
msgid "Your current changes will delete all saved color changes."
msgstr "De huidige wijzigingen zullen alle kleurwisselingen verwijderen."

#: src/slic3r/GUI/DoubleSlider.cpp:2588 src/slic3r/GUI/DoubleSlider.cpp:2609
msgid "Are you sure you want to continue?"
msgstr "Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/DoubleSlider.cpp:2602
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""
"Selecteer JA als u alle toolwisselingen wil opslaan,\n"
"of NEE als u alle toolwisselingen wilt veranderen in kleurwisselingen\n"
"of klik op annuleren om wijzingen ongedaan te maken."

#: src/slic3r/GUI/DoubleSlider.cpp:2605
msgid "Do you want to delete all saved tool changes?"
msgstr "Wilt u alle opgeslagen toolwisselingen verwijderen?"

#: src/slic3r/GUI/DoubleSlider.cpp:2607
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""
"De laatste gegevens van de kleurwisseling zijn opgeslagen voor een multi-"
"extruderprinter met toolwisselingen voor de hele print."

#: src/slic3r/GUI/DoubleSlider.cpp:2608
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""
"De huidige wijzigingen worden verwijderd voor alle extruder "
"(tool)wisselingen."

#: src/slic3r/GUI/Downloader.cpp:150
#, boost-format
msgid ""
"Download won't start. Download URL doesn't point to https://printables.com : "
"%1%"
msgstr ""

#: src/slic3r/GUI/Downloader.cpp:181
msgid "The download has failed"
msgstr ""

#. TRN %1% = file path
#: src/slic3r/GUI/DownloaderFileGet.cpp:194 src/slic3r/Utils/AppUpdater.cpp:224
#: src/slic3r/Utils/AppUpdater.cpp:269
#, boost-format
msgid "Can't create file at %1%"
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:323 src/slic3r/GUI/GUI_ObjectList.cpp:582
#: src/slic3r/GUI/GUI_ObjectList.cpp:594 src/slic3r/GUI/GUI_ObjectList.cpp:1064
#: src/slic3r/GUI/GUI_ObjectList.cpp:2131
#: src/slic3r/GUI/GUI_ObjectList.cpp:3031
#: src/slic3r/GUI/GUI_ObjectList.cpp:4903
#: src/slic3r/GUI/ObjectDataViewModel.cpp:259 src/libslic3r/PrintConfig.cpp:892
msgid "default"
msgstr "standaard"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
msgid "Set extruder sequence"
msgstr "Stel extrudervolgorde in"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
msgid "Set extruder change for every"
msgstr "Stel toolwissel in voor elke"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
#: src/libslic3r/PrintConfig.cpp:763 src/libslic3r/PrintConfig.cpp:1483
#: src/libslic3r/PrintConfig.cpp:2173 src/libslic3r/PrintConfig.cpp:2352
#: src/libslic3r/PrintConfig.cpp:2426 src/libslic3r/PrintConfig.cpp:2685
#: src/libslic3r/PrintConfig.cpp:2732 src/libslic3r/PrintConfig.cpp:2748
msgid "layers"
msgstr "lagen"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
msgid "Random sequence"
msgstr "Willekeurige volgorde"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr ""
"Willekeurige volgorde van de geselecteerde extruders wordt toegestaan als "
"dit is ingeschakeld."

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
msgid "Allow next color repetition"
msgstr "Sta volgende kleur volgorde toe"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr ""
"Een herhaling van de volgende willekeurige kleur wordt toegestaan als dit is "
"ingeschakeld."

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Set extruder(tool) sequence"
msgstr "Stel toolvolgorde in"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
msgid "Remove extruder from sequence"
msgstr "Verwijder extruder uit de reeks"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
msgid "Add extruder to sequence"
msgstr "Voeg extruder toe aan de reeks"

#: src/slic3r/GUI/Field.cpp:188
msgid "default value"
msgstr "standaardwaarde"

#: src/slic3r/GUI/Field.cpp:191
msgid "parameter name"
msgstr "parameternaam"

#: src/slic3r/GUI/Field.cpp:206 src/slic3r/GUI/OptionsGroup.cpp:852
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1077
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1089
msgid "N/A"
msgstr "n.v.t."

#: src/slic3r/GUI/Field.cpp:229 src/slic3r/GUI/Field.cpp:302
#, c-format, boost-format
msgid "%s doesn't support percentage"
msgstr "%s ondersteunt geen percentage"

#: src/slic3r/GUI/Field.cpp:269
#, c-format, boost-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""
"Ingevoerde waarde is buiten bereik\n"
"Weet u zeker dat %s een juiste waarde is en dat u door wilt gaan?"

#: src/slic3r/GUI/Field.cpp:272 src/slic3r/GUI/Field.cpp:348
msgid "Parameter validation"
msgstr "Parametervalidatie"

#: src/slic3r/GUI/Field.cpp:285 src/slic3r/GUI/Field.cpp:395
#: src/slic3r/GUI/Field.cpp:1597
msgid "Input value is out of range"
msgstr "Ingevoerde waarde valt buiten het bereik"

#. TRN %1% = Value, %2% = units
#: src/slic3r/GUI/Field.cpp:345
#, boost-format
msgid ""
"Do you mean %1%%% instead of %1% %2%?\n"
"Select YES if you want to change this value to %1%%%, \n"
"or NO if you are sure that %1% %2% is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:402
#, boost-format
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""
"Ongeldige invoer. Verwachte waarde moet in het volgende format: \"%1%\""

#: src/slic3r/GUI/FileArchiveDialog.cpp:170
msgid "Archive preview"
msgstr ""

#: src/slic3r/GUI/FileArchiveDialog.cpp:273
#: src/slic3r/GUI/FileArchiveDialog.cpp:286
msgid "Open"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flash!"
msgstr "Flash!"

#: src/slic3r/GUI/FirmwareDialog.cpp:154
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "Flashen in uitvoering. Ontkoppel de printer niet!"

#: src/slic3r/GUI/FirmwareDialog.cpp:201
msgid "Flashing failed"
msgstr "Flashen mislukt"

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing succeeded!"
msgstr "Flashen succesvol!"

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing failed. Please see the avrdude log below."
msgstr "Flashen mislukt. Check het AVRDUDE-logboek hieronder."

#: src/slic3r/GUI/FirmwareDialog.cpp:285
msgid "Flashing cancelled."
msgstr "Flashen geannuleerd."

#: src/slic3r/GUI/FirmwareDialog.cpp:333
#, c-format, boost-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"Dit HEX-bestand is niet geschikt voor deze printer.\n"
"Het HEX-bestand is bedoeld voor: %s\n"
"Geïdentificeerde printer: %s\n"
"\n"
"Weet u zeker dat u door wilt gaan met dit HEX-bestand?\n"
"Ga alleen door als u zeker weet dat dit juist is."

#: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455
#, c-format, boost-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""
"Meerdere %s apparaten gevonden. Verbind één printer per keer voor het "
"flashen."

#: src/slic3r/GUI/FirmwareDialog.cpp:437
#, c-format, boost-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"Het %s apparaat is niet gevonden.\n"
"Klik op de reset-knop naast de USB-aansluiting als het apparaat is verbonden."

#: src/slic3r/GUI/FirmwareDialog.cpp:549
#, c-format, boost-format
msgid "The %s device could not have been found"
msgstr "Het %s apparaat kon niet gevonden worden"

#: src/slic3r/GUI/FirmwareDialog.cpp:650
#, c-format, boost-format
msgid "Error accessing port at %s: %s"
msgstr "Fout bij het openen van de poort op %s: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:652
#, c-format, boost-format
msgid "Error: %s"
msgstr "Fout: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:787
msgid "Firmware flasher"
msgstr "Firmwareflasher"

#: src/slic3r/GUI/FirmwareDialog.cpp:812
msgid "Firmware image:"
msgstr "Firmwarebestand:"

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Select a file"
msgstr "Selecteer een bestand"

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Serial port:"
msgstr "Seriële poort:"

#: src/slic3r/GUI/FirmwareDialog.cpp:819
msgid "Autodetected"
msgstr "Automatisch gedetecteerd"

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Rescan"
msgstr "Opnieuw scannen"

#: src/slic3r/GUI/FirmwareDialog.cpp:827
msgid "Progress:"
msgstr "Voortgang:"

#: src/slic3r/GUI/FirmwareDialog.cpp:830
msgid "Status:"
msgstr "Status:"

#: src/slic3r/GUI/FirmwareDialog.cpp:831
msgid "Ready"
msgstr "Klaar"

#: src/slic3r/GUI/FirmwareDialog.cpp:851
msgid "Advanced: Output log"
msgstr "Geavanceerd: Output logboek"

#: src/slic3r/GUI/FirmwareDialog.cpp:862
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:356
#: src/slic3r/GUI/Mouse3DController.cpp:543
#: src/slic3r/GUI/PrintHostDialogs.cpp:313
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:125
msgid "Close"
msgstr "Sluit"

#: src/slic3r/GUI/FirmwareDialog.cpp:915
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"Weet u zeker dat u het firmware flashen wilt stoppen?\n"
"Dit kan er voor zorgen dat de printer onbruikbaar wordt!"

#: src/slic3r/GUI/FirmwareDialog.cpp:916
msgid "Confirmation"
msgstr "Bevestiging"

#: src/slic3r/GUI/FirmwareDialog.cpp:919
msgid "Cancelling..."
msgstr "Annuleren..."

#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1488
msgid "Shape Gallery"
msgstr "Vormengalerij"

#: src/slic3r/GUI/GalleryDialog.cpp:76
msgid "Select shape from the gallery"
msgstr "Selecteer vorm uit de galerij"

#: src/slic3r/GUI/GalleryDialog.cpp:114 src/slic3r/GUI/Tab.cpp:4564
msgid "Add"
msgstr "Voeg toe"

#: src/slic3r/GUI/GalleryDialog.cpp:114
msgid "Add one or more custom shapes"
msgstr "Voeg een of meer aangepaste vormen toe"

#: src/slic3r/GUI/GalleryDialog.cpp:115 src/slic3r/GUI/GalleryDialog.cpp:528
#: src/slic3r/GUI/GLCanvas3D.cpp:5307 src/slic3r/GUI/GUI_Factories.cpp:460
#: src/slic3r/GUI/Tab.cpp:4160
msgid "Delete"
msgstr "Verwijder"

#: src/slic3r/GUI/GalleryDialog.cpp:115
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr ""
"Verwijder een of meer aangepaste vormen. U kunt geen standaardvormen "
"verwijderen"

#: src/slic3r/GUI/GalleryDialog.cpp:142
msgid "Add to bed"
msgstr "Voeg toe aan bed"

#: src/slic3r/GUI/GalleryDialog.cpp:142
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2178
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2265
msgid "OK"
msgstr "OK"

#: src/slic3r/GUI/GalleryDialog.cpp:143
msgid "Add selected shape(s) to the bed"
msgstr "Voeg geselecteerd(e) object(en) toe aan bed"

#: src/slic3r/GUI/GalleryDialog.cpp:422
msgid "Choose one or more files (STL, OBJ):"
msgstr "Kies een of meer bestanden (STL, OBJ):"

#: src/slic3r/GUI/GalleryDialog.cpp:462
#, boost-format
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""
"Het lijkt erop dat de geselecteerde %1%-bestand een error geeft of is "
"vernietigd.\n"
"Het bestand kan niet geladen worden"

#: src/slic3r/GUI/GalleryDialog.cpp:473
msgid "Choose one PNG file:"
msgstr "Kies een PNG-bestand:"

#: src/slic3r/GUI/GalleryDialog.cpp:486
msgid "Replacing of the PNG"
msgstr "Herplaats de PNG"

#: src/slic3r/GUI/GalleryDialog.cpp:530
msgid "Change thumbnail"
msgstr "Verander miniatuur"

#: src/slic3r/GUI/GalleryDialog.cpp:571 src/slic3r/GUI/GalleryDialog.cpp:576
#, boost-format
msgid "Loading of the \"%1%\""
msgstr "Laden van de \"%1%\""

#: src/slic3r/GUI/GCodeViewer.cpp:343
msgid "Tool position"
msgstr "Toolpositie"

#: src/slic3r/GUI/GCodeViewer.cpp:1550
msgid "Generating toolpaths"
msgstr "Toolpaden genereren"

#: src/slic3r/GUI/GCodeViewer.cpp:1622
msgid "Generating vertex buffer"
msgstr "Vertex buffer genereren"

#: src/slic3r/GUI/GCodeViewer.cpp:1982
msgid "Generating index buffers"
msgstr "Index buffers genereren"

#: src/slic3r/GUI/GCodeViewer.cpp:3276 src/libslic3r/PrintConfig.cpp:1171
msgid "g"
msgstr "g"

#: src/slic3r/GUI/GCodeViewer.cpp:3277 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:494
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:514
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1826
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1210
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1976
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:309
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:433
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:554
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:555
msgid "in"
msgstr "in"

#: src/slic3r/GUI/GCodeViewer.cpp:3278
msgctxt "Metre"
msgid "m"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3289
msgid "Click to hide"
msgstr "Klik om te verbergen"

#: src/slic3r/GUI/GCodeViewer.cpp:3289
msgid "Click to show"
msgstr "Klik om te tonen"

#: src/slic3r/GUI/GCodeViewer.cpp:3462
msgid "up to"
msgstr "tot op"

#: src/slic3r/GUI/GCodeViewer.cpp:3468
msgid "above"
msgstr "boven"

#: src/slic3r/GUI/GCodeViewer.cpp:3476
msgid "from"
msgstr "vanaf"

#: src/slic3r/GUI/GCodeViewer.cpp:3476
msgid "to"
msgstr "naar"

#: src/slic3r/GUI/GCodeViewer.cpp:3526 src/slic3r/GUI/GCodeViewer.cpp:3527
#: src/slic3r/GUI/GCodeViewer.cpp:3602
msgid "Percentage"
msgstr "Percentage"

#: src/slic3r/GUI/GCodeViewer.cpp:3537 src/slic3r/GUI/GCodeViewer.cpp:3580
msgid "Feature type"
msgstr "Type optie"

#: src/slic3r/GUI/GCodeViewer.cpp:3537 src/slic3r/GUI/GCodeViewer.cpp:3602
#: src/slic3r/GUI/RammingChart.cpp:90
msgid "Time"
msgstr "Tijd"

#: src/slic3r/GUI/GCodeViewer.cpp:3581
msgid "Height (mm)"
msgstr "Hoogte (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3582
msgid "Width (mm)"
msgstr "Breedte (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3583
msgid "Speed (mm/s)"
msgstr "Snelheid (mm/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:3584
msgid "Fan speed (%)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3585
msgid "Temperature (°C)"
msgstr "Temperatuur (°C)"

#: src/slic3r/GUI/GCodeViewer.cpp:3586
msgid "Volumetric flow rate (mm³/s)"
msgstr "Volumetrisch debiet (mm³/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:3587
msgid "Layer time (linear)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3588
msgid "Layer time (logarithmic)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3589
msgid "Tool"
msgstr "Tool"

#: src/slic3r/GUI/GCodeViewer.cpp:3590
msgid "Color Print"
msgstr "Kleurenprint"

#: src/slic3r/GUI/GCodeViewer.cpp:3602 src/slic3r/GUI/GCodeViewer.cpp:3604
#: src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Used filament"
msgstr "Gebruikt filament"

#: src/slic3r/GUI/GCodeViewer.cpp:3633 src/slic3r/GUI/GCodeViewer.cpp:4080
#: src/libslic3r/PrintConfig.cpp:1470 src/libslic3r/PrintConfig.cpp:3080
msgid "Travel"
msgstr "Beweging"

#: src/slic3r/GUI/GCodeViewer.cpp:3650 src/slic3r/GUI/GCodeViewer.cpp:3695
#: src/slic3r/GUI/GCodeViewer.cpp:3699
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:74
#: src/slic3r/GUI/GUI_ObjectList.cpp:349 src/slic3r/GUI/Tab.cpp:1959
#: src/slic3r/GUI/wxExtensions.cpp:510 src/libslic3r/PrintConfig.cpp:886
msgid "Extruder"
msgstr "Extruder"

#: src/slic3r/GUI/GCodeViewer.cpp:3672
msgid "Default color"
msgstr "Standaardkleur"

#: src/slic3r/GUI/GCodeViewer.cpp:3695
msgid "default color"
msgstr "standaardkleur"

#: src/slic3r/GUI/GCodeViewer.cpp:3795 src/slic3r/GUI/GCodeViewer.cpp:3851
msgid "Color change"
msgstr "Kleurwissel"

#: src/slic3r/GUI/GCodeViewer.cpp:3814 src/slic3r/GUI/GCodeViewer.cpp:3849
msgid "Print"
msgstr "Print"

#: src/slic3r/GUI/GCodeViewer.cpp:3850 src/slic3r/GUI/GCodeViewer.cpp:3884
msgid "Pause"
msgstr "Pauzeer"

#: src/slic3r/GUI/GCodeViewer.cpp:3867 src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Event"
msgstr "Gebeurtenis"

#: src/slic3r/GUI/GCodeViewer.cpp:3867 src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Remaining time"
msgstr "Resterende tijd"

#: src/slic3r/GUI/GCodeViewer.cpp:3867 src/slic3r/GUI/GCodeViewer.cpp:3870
msgid "Duration"
msgstr "Duur"

#: src/slic3r/GUI/GCodeViewer.cpp:3938 src/slic3r/GUI/GUI.cpp:332
#: src/slic3r/GUI/Plater.cpp:855 src/libslic3r/PrintConfig.cpp:332
msgid "Printer"
msgstr "Printer"

#: src/slic3r/GUI/GCodeViewer.cpp:3941 src/slic3r/GUI/GUI.cpp:328
#: src/slic3r/GUI/Plater.cpp:851
msgid "Print settings"
msgstr "Printinstellingen"

#: src/slic3r/GUI/GCodeViewer.cpp:3946 src/slic3r/GUI/GUI.cpp:330
#: src/slic3r/GUI/Plater.cpp:852 src/slic3r/GUI/Tab.cpp:1998
#: src/slic3r/GUI/Tab.cpp:1999
msgid "Filament"
msgstr "Filament"

#: src/slic3r/GUI/GCodeViewer.cpp:3961
msgid "Hide Custom G-code"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3961
msgid "Show Custom G-code"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3974
msgid "Estimated printing times"
msgstr "Geschatte printtijden"

#: src/slic3r/GUI/GCodeViewer.cpp:3993
msgid "Normal mode"
msgstr "Normale modus"

#: src/slic3r/GUI/GCodeViewer.cpp:3994
msgid "Stealth mode"
msgstr "Stille modus"

#: src/slic3r/GUI/GCodeViewer.cpp:4003 src/libslic3r/PrintConfig.cpp:1247
#: src/libslic3r/PrintConfig.cpp:1265 src/libslic3r/PrintConfig.cpp:1275
#: src/libslic3r/PrintConfig.cpp:1320
msgid "First layer"
msgstr "Eerste laag"

#: src/slic3r/GUI/GCodeViewer.cpp:4007
msgid "Total"
msgstr "Totaal"

#: src/slic3r/GUI/GCodeViewer.cpp:4026
msgid "Show stealth mode"
msgstr "Toon stille modus"

#: src/slic3r/GUI/GCodeViewer.cpp:4030
msgid "Show normal mode"
msgstr "Toon normale modus"

#: src/slic3r/GUI/GCodeViewer.cpp:4084
msgid "Wipe"
msgstr "Afvegen"

#: src/slic3r/GUI/GCodeViewer.cpp:4088
msgid "Retractions"
msgstr "Retracties"

#: src/slic3r/GUI/GCodeViewer.cpp:4092
msgid "Deretractions"
msgstr "Deretracties"

#: src/slic3r/GUI/GCodeViewer.cpp:4096
msgid "Seams"
msgstr "Naad"

#: src/slic3r/GUI/GCodeViewer.cpp:4100
msgid "Tool changes"
msgstr "Toolwisselingen"

#: src/slic3r/GUI/GCodeViewer.cpp:4104
msgid "Color changes"
msgstr "Kleurwisselingen"

#: src/slic3r/GUI/GCodeViewer.cpp:4108
msgid "Print pauses"
msgstr "Printpauzes"

#: src/slic3r/GUI/GCodeViewer.cpp:4112
msgid "Custom G-codes"
msgstr "Aangepaste G-code"

#: src/slic3r/GUI/GCodeViewer.cpp:4116
msgid "Center of gravity"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4121
msgid "Shells"
msgstr "Shells"

#: src/slic3r/GUI/GCodeViewer.cpp:4126
msgid "Tool marker"
msgstr "Toolmarkering"

#: src/slic3r/GUI/GLCanvas3D.cpp:189 src/slic3r/GUI/GLCanvas3D.cpp:5453
#: src/slic3r/GUI/ObjectDataViewModel.cpp:71
msgid "Variable layer height"
msgstr "Variabele laagdikte"

#: src/slic3r/GUI/GLCanvas3D.cpp:191
msgid "Left mouse button:"
msgstr "Linkermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:193
msgid "Add detail"
msgstr "Voeg detail toe"

#: src/slic3r/GUI/GLCanvas3D.cpp:195
msgid "Right mouse button:"
msgstr "Rechtermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:197
msgid "Remove detail"
msgstr "Verwijder detail"

#: src/slic3r/GUI/GLCanvas3D.cpp:199
msgid "Shift + Left mouse button:"
msgstr "Shift + linkermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:201
msgid "Reset to base"
msgstr "Reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:203
msgid "Shift + Right mouse button:"
msgstr "Shift + rechtermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:205
msgid "Smoothing"
msgstr "Egaliseren"

#: src/slic3r/GUI/GLCanvas3D.cpp:207
msgid "Mouse wheel:"
msgstr "Scrollwieltje:"

#: src/slic3r/GUI/GLCanvas3D.cpp:209
msgid "Increase/decrease edit area"
msgstr "Vergroot/verklein bewerkgebied"

#: src/slic3r/GUI/GLCanvas3D.cpp:212
msgid "Adaptive"
msgstr "Adaptief"

#: src/slic3r/GUI/GLCanvas3D.cpp:218
msgid "Quality / Speed"
msgstr "Kwaliteit / Snelheid"

#: src/slic3r/GUI/GLCanvas3D.cpp:221
msgid "Higher print quality versus higher print speed."
msgstr "Hogere printkwaliteit tegenover een hogere printsnelheid."

#: src/slic3r/GUI/GLCanvas3D.cpp:232
msgid "Smooth"
msgstr "Egaliseer"

#: src/slic3r/GUI/GLCanvas3D.cpp:238 src/libslic3r/PrintConfig.cpp:906
msgid "Radius"
msgstr "Radius"

#: src/slic3r/GUI/GLCanvas3D.cpp:250
msgid "Keep min"
msgstr "Behoud min"

#: src/slic3r/GUI/GLCanvas3D.cpp:259 src/slic3r/GUI/GLCanvas3D.cpp:4878
msgid "Reset"
msgstr "Reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:621
msgid "Variable layer height - Manual edit"
msgstr "Variabele laagdikte - handmatig bewerken"

#: src/slic3r/GUI/GLCanvas3D.cpp:736
msgid "Seq."
msgstr "Volg."

#: src/slic3r/GUI/GLCanvas3D.cpp:1305
msgid "SLA view"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1324
msgid "Show as processed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1325
msgid "Show as original"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1758
msgid "Variable layer height - Reset"
msgstr "Variabele laagdikte - reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:1766
msgid "Variable layer height - Adaptive"
msgstr "Variabele laagdikte - adaptief"

#: src/slic3r/GUI/GLCanvas3D.cpp:1774
msgid "Variable layer height - Smooth all"
msgstr "Variabele laagdikte - egaliseer alles"

#: src/slic3r/GUI/GLCanvas3D.cpp:2231
msgid "Mirror Object"
msgstr "Spiegel object"

#: src/slic3r/GUI/GLCanvas3D.cpp:3127 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:78
msgid "Gizmo-Move"
msgstr "Verplaatsen"

#: src/slic3r/GUI/GLCanvas3D.cpp:3219
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:583
msgid "Gizmo-Rotate"
msgstr "Roteren"

#: src/slic3r/GUI/GLCanvas3D.cpp:3861
msgid "Move Object"
msgstr "Verplaats object"

#: src/slic3r/GUI/GLCanvas3D.cpp:4113
#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:33
msgid "Gizmo-Place on Face"
msgstr "Plaats op vlak"

#: src/slic3r/GUI/GLCanvas3D.cpp:4497 src/slic3r/GUI/GLCanvas3D.cpp:5413
msgid "Switch to Settings"
msgstr "Schakel over naar instellingen"

#: src/slic3r/GUI/GLCanvas3D.cpp:4498 src/slic3r/GUI/GLCanvas3D.cpp:5413
msgid "Print Settings Tab"
msgstr "Printinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4499 src/slic3r/GUI/GLCanvas3D.cpp:5414
msgid "Filament Settings Tab"
msgstr "Filamentinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4499 src/slic3r/GUI/GLCanvas3D.cpp:5414
msgid "Material Settings Tab"
msgstr "Materiaalinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4500 src/slic3r/GUI/GLCanvas3D.cpp:5415
msgid "Printer Settings Tab"
msgstr "Printerinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4717
msgid "Undo History"
msgstr "Geschiedenis ongedaan maken"

#: src/slic3r/GUI/GLCanvas3D.cpp:4717
msgid "Redo History"
msgstr "Geschiedenis opnieuw doen"

#: src/slic3r/GUI/GLCanvas3D.cpp:4737
#, c-format, boost-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] "Maak %1$d actie ongedaan"
msgstr[1] "Maak %1$d acties ongedaan"

#: src/slic3r/GUI/GLCanvas3D.cpp:4737
#, c-format, boost-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] "Doe %1$d actie opnieuw"
msgstr[1] "Doe %1$d acties opnieuw"

#: src/slic3r/GUI/GLCanvas3D.cpp:4756 src/slic3r/GUI/GLCanvas3D.cpp:5431
#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Search.cpp:482
msgid "Search"
msgstr "Zoek"

#: src/slic3r/GUI/GLCanvas3D.cpp:4770 src/slic3r/GUI/GLCanvas3D.cpp:4778
#: src/slic3r/GUI/Search.cpp:488
msgid "Enter a search term"
msgstr "Voer een zoekterm in"

#: src/slic3r/GUI/GLCanvas3D.cpp:4810
msgid "Arrange options"
msgstr "Schikopties"

#: src/slic3r/GUI/GLCanvas3D.cpp:4845
#, boost-format
msgid "Press %1%left mouse button to enter the exact value"
msgstr "Druk de %1%linkermuisknop om de exacte waarde in te voeren"

#: src/slic3r/GUI/GLCanvas3D.cpp:4847
msgid "Spacing"
msgstr "Tussenruimte"

#: src/slic3r/GUI/GLCanvas3D.cpp:4854
msgid "Spacing from bed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4861
msgid "Enable rotations (slow)"
msgstr "Sta draaien toe (vertraagd het slicen)"

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Alignment"
msgstr "Uitlijning"

#: src/slic3r/GUI/GLCanvas3D.cpp:4870 src/libslic3r/PrintConfig.cpp:4761
msgid "Center"
msgstr "Centreer"

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Rear left"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Front left"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Front right"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870
msgid "Rear right"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4870 src/libslic3r/PrintConfig.cpp:2305
msgid "Random"
msgstr "Willekeurig"

#: src/slic3r/GUI/GLCanvas3D.cpp:4897 src/slic3r/GUI/GLCanvas3D.cpp:5325
#: src/slic3r/GUI/KBShortcutsDialog.cpp:141 src/slic3r/GUI/Plater.cpp:7196
msgid "Arrange"
msgstr "Schikken"

#: src/slic3r/GUI/GLCanvas3D.cpp:5299
msgid "Add..."
msgstr "Voeg toe..."

#: src/slic3r/GUI/GLCanvas3D.cpp:5316 src/slic3r/GUI/KBShortcutsDialog.cpp:105
#: src/slic3r/GUI/Plater.cpp:6062 src/slic3r/GUI/Tab.cpp:4570
msgid "Delete all"
msgstr "Verwijder alles"

#: src/slic3r/GUI/GLCanvas3D.cpp:5325 src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Arrange selection"
msgstr "Schik selectie"

#: src/slic3r/GUI/GLCanvas3D.cpp:5325
msgid "Click right mouse button to show arrangement options"
msgstr "Rechtermuisklik om schikopties te tonen"

#: src/slic3r/GUI/GLCanvas3D.cpp:5345
msgid "Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/GLCanvas3D.cpp:5354
msgid "Paste"
msgstr "Plak"

#: src/slic3r/GUI/GLCanvas3D.cpp:5366 src/slic3r/GUI/GUI_Factories.cpp:1246
#: src/slic3r/GUI/GUI_Factories.cpp:1270 src/slic3r/GUI/GUI_Factories.cpp:1281
msgid "Add instance"
msgstr "Voeg instantie toe"

#: src/slic3r/GUI/GLCanvas3D.cpp:5377 src/slic3r/GUI/GUI_Factories.cpp:1249
msgid "Remove instance"
msgstr "Verwijder instantie"

#: src/slic3r/GUI/GLCanvas3D.cpp:5390
msgid "Split to objects"
msgstr "Verdeel in objecten"

#: src/slic3r/GUI/GLCanvas3D.cpp:5400
msgid "Split to parts"
msgstr "Verdeel in onderdelen"

#: src/slic3r/GUI/GLCanvas3D.cpp:5506 src/slic3r/GUI/GLCanvas3D.cpp:5543
msgid "Click right mouse button to open/close History"
msgstr "Rechtermuisklik om geschiedenis te openen/sluiten"

#: src/slic3r/GUI/GLCanvas3D.cpp:5528
#, boost-format
msgid "Next Undo action: %1%"
msgstr "Volgende ongedaan maken: %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:5543 src/slic3r/GUI/KBShortcutsDialog.cpp:107
#: src/slic3r/GUI/MainFrame.cpp:1429
msgid "Redo"
msgstr "Doe opnieuw"

#: src/slic3r/GUI/GLCanvas3D.cpp:5564
#, boost-format
msgid "Next Redo action: %1%"
msgstr "Volgende opnieuw doen: %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:7459
msgid "An object outside the print area was detected."
msgstr "Er is een object buiten het printbereik gedetecteerd."

#: src/slic3r/GUI/GLCanvas3D.cpp:7460
msgid "A toolpath outside the print area was detected."
msgstr "Er is een toolpad buiten het printbereik gedetecteerd."

#: src/slic3r/GUI/GLCanvas3D.cpp:7461
msgid "SLA supports outside the print area were detected."
msgstr "Er zijn SLA-supports buiten het printbereik gedetecteerd."

#: src/slic3r/GUI/GLCanvas3D.cpp:7462
msgid "Some objects are not visible during editing."
msgstr "Sommige objecten zijn niet zichtbaar tijdens het bewerken."

#: src/slic3r/GUI/GLCanvas3D.cpp:7464
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""
"Er is een object buiten het printbereik gedetecteerd.\n"
"Los het probleem op om door te gaan met slicen."

#: src/slic3r/GUI/GLCanvas3D.cpp:7539
msgid "Selection-Add from rectangle"
msgstr "Selectie - Voeg toe van boxselectie"

#: src/slic3r/GUI/GLCanvas3D.cpp:7554
msgid "Selection-Remove from rectangle"
msgstr "Selectie - Verwijder van boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:190
msgid "Auto"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:190
msgid "Manual"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
msgid "Plug"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
msgid "Dowel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:202
msgid "Prism"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:202
msgid "Frustum"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
msgid "Triangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
msgid "Square"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
msgid "Hexagon"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
msgid "Circle"
msgstr "Cirkel"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:213
msgid "Keep orientation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:214
msgid "Place on cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:215
msgid "Flip upside down"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:219
msgid "Connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:220
msgid "Type"
msgstr "Type"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:221 src/libslic3r/PrintConfig.cpp:2836
msgid "Style"
msgstr "Type"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:223
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:875
msgid "Depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2022
#: src/slic3r/GUI/GUI_ObjectList.cpp:4155
#: src/slic3r/GUI/GUI_ObjectList.cpp:4347
msgid "Part"
msgstr "Onderdeel"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2022
msgid "Object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:253
msgid ""
"Click to flip the cut plane\n"
"Drag to move the cut plane\n"
"Right-click a part to assign it to the other side"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:259 src/libslic3r/PrintConfig.cpp:495
#: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:2324
#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2633
#: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2887
#: src/libslic3r/PrintConfig.cpp:2899 src/libslic3r/PrintConfig.cpp:2936
#: src/libslic3r/PrintConfig.cpp:3184 src/libslic3r/PrintConfig.cpp:3200
#: src/libslic3r/PrintConfig.cpp:3305 src/libslic3r/PrintConfig.cpp:3540
#: src/libslic3r/PrintConfig.cpp:4029
msgid "°"
msgstr "°"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:383
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:557
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1205
msgid "Move cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:530
msgid "Value"
msgstr "Waarde"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:535
msgid "Tolerance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:823
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:826
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:827
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
msgid "Left click"
msgstr "Linkermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:823
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2821
msgid "Add connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:824
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
msgid "Right click"
msgstr "Rechtermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:824
msgid "Remove connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:825
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
msgid "Drag"
msgstr "Versleep"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:825
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1189
msgid "Move connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:826
msgid "Add connector to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:827
msgid "Remove connector from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:828
msgid "Select all connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:852 src/libslic3r/PrintConfig.cpp:4739
msgid "Cut"
msgstr "Snij door"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1200
msgid "Rotate cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1765
msgid "Remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1810
msgid "Confirm connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1879
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1918
msgid "Flip cut plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1962
msgid "Hold SHIFT key to draw a cut line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1968
msgid "Cut position"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1977
msgid "Reset cutting plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1989
msgid "Edit connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1989
msgid "Add connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1996
msgid "Reset cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1997
msgid "Reset cutting plane and remove connectors"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2052
msgid "Cut result"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2072
msgid "Cut into"
msgstr ""

#. TRN CutGizmo: RadioButton Cut into ...
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2079
msgid "Objects"
msgstr ""

#. TRN CutGizmo: RadioButton Cut into ...
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2083
msgid "Parts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2097
msgid "Perform cut"
msgstr "Snij door"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2195
msgid "Invalid connectors detected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2197
#, c-format, boost-format
msgid "%1$d connector is out of cut contour"
msgid_plural "%1$d connectors are out of cut contour"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2200
#, c-format, boost-format
msgid "%1$d connector is out of object"
msgid_plural "%1$d connectors are out of object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2203
msgid "Some connectors are overlapped"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2207
msgid "Select at least one object to keep after cutting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2209
msgid "Cut plane is placed out of object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2446
msgid "Connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2487
msgid "Cut by Plane"
msgstr "Snij met behulp van vlak"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2796
msgid "Cut by line"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2847
msgid "Delete connector"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:296
msgid "Entering Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:297
msgid "Leaving Cut gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:298
msgid "Cut gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:358
msgid "Embossed text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:572
msgid "Emboss"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:833
msgid "Text-Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:873
msgid "Font"
msgstr "Lettertype"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:874
#: src/libslic3r/PrintConfig.cpp:895
msgid "Height"
msgstr "Hoogte"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:884
msgid "Use surface"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:885
msgid "Char gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:886
msgid "Line gap"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:887
msgid "Boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:888
msgid "Skew ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:889
msgid "From surface"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:890
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:203
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:607
#: src/slic3r/GUI/Mouse3DController.cpp:478
#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Rotation"
msgstr "Rotatie"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:892
msgid "Collection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:966
msgid "NORMAL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:967
msgid "SMALL"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:968
msgid "ITALIC"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:969
msgid "SWISS"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:970
msgid "MODERN"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1006
msgid "First font"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1011
msgid "Default font"
msgstr "Standaard lettertype"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1343
#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1444
#: src/slic3r/GUI/Tab.cpp:1479 src/slic3r/GUI/Tab.cpp:1619
#: src/slic3r/GUI/Tab.cpp:1623 src/slic3r/GUI/Tab.cpp:2069
#: src/slic3r/GUI/Tab.cpp:2537 src/slic3r/GUI/Tab.cpp:5188
#: src/libslic3r/PrintConfig.cpp:273 src/libslic3r/PrintConfig.cpp:511
#: src/libslic3r/PrintConfig.cpp:1491 src/libslic3r/PrintConfig.cpp:1573
#: src/libslic3r/PrintConfig.cpp:1620 src/libslic3r/PrintConfig.cpp:2582
#: src/libslic3r/PrintConfig.cpp:2592 src/libslic3r/PrintConfig.cpp:3240
#: src/libslic3r/PrintConfig.cpp:3274 src/libslic3r/PrintConfig.cpp:3285
#: src/libslic3r/PrintConfig.cpp:3300 src/libslic3r/PrintConfig.cpp:3313
#: src/libslic3r/PrintConfig.cpp:3322 src/libslic3r/PrintConfig.cpp:3334
#: src/libslic3r/PrintConfig.cpp:3716
msgid "Advanced"
msgstr "Geavanceerd"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1444
msgid ""
"The text cannot be written using the selected font. Please try choosing a "
"different font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1453
msgid "Embossed text cannot contain only white spaces."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1455
msgid "Text contains character glyph (represented by '?') unknown by font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1458
msgid "Text input doesn't show font skew."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1459
msgid "Text input doesn't show font boldness."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1461
msgid "Text input doesn't show gap between lines."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1465
msgid "Too tall, diminished font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1467
msgid "Too small, enlarged font height inside text input."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1774
msgid "No symbol"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1775
#: src/slic3r/GUI/GUI_ObjectList.cpp:1608 src/slic3r/GUI/Plater.cpp:2444
msgid "Loading"
msgstr "Aan het laden"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1825
msgid "Queue"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1881
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:676
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:365
msgid "Apply"
msgstr "Toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1899
msgid "Revert font changes."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2003
#, boost-format
msgid "Font \"%1%\" can't be selected."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2077
msgid "Operation"
msgstr ""

#. TRN EmbossOperation
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2092
msgid "Join"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2095
msgid "Click to change text into object part."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2098
#: src/slic3r/GUI/GUI_ObjectList.cpp:4337
msgid "You can't change a type of the last solid part of the object."
msgstr ""
"U kunt het type van het laatste onderdeel van een object niet wijzigen."

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2099
msgctxt "EmbossOperation"
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2105
msgid "Click to change part type into negative volume."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2111
#: src/slic3r/GUI/GUI_ObjectList.cpp:4354
msgid "Modifier"
msgstr "Modificator"

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2117
msgid "Click to change part type into modifier."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2124
msgid "Change Text Type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2155
#, boost-format
msgid "Rename style(%1%) for embossing text"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2167
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2252
msgid "Name can't be empty."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2169
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2254
msgid "Name has to be unique."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2205
msgid "Rename style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2212
msgid "Rename current style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2213
msgid "Can't rename temporary style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2230
msgid "First Add style to list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2232
#, boost-format
msgid "Save %1% style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2234
msgid "No changes to save."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2241
msgid "New name of style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2290
msgid "Save as new style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2302
msgid "Only valid font can be added to style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2304
msgid "Add style to my list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2306
msgid "Save as new style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2324
msgid "Remove style"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2335
msgid "Can't remove the last existing style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2348
#, boost-format
msgid "Are you sure you want to permanently remove the \"%1%\" style?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2368
#, boost-format
msgid "Delete \"%1%\" style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2369
#, boost-format
msgid "Can't delete \"%1%\". It is last style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2370
#, boost-format
msgid "Can't delete temporary style \"%1%\"."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2419
msgid "Styles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2481
#, boost-format
msgid "Modified style \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2482
#, boost-format
msgid "Current style is \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2490
#, boost-format
msgid ""
"Changing style to \"%1%\" will discard current style modification.\n"
"\n"
"Would you like to continue anyway?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2506
msgid "Not valid style."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2507
#, boost-format
msgid "Style \"%1%\" can't be used and will be removed from a list."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2553
msgid "Unset italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2570
msgid "Set italic"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2599
msgid "Unset bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2617
msgid "Set bold"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2772
msgid "Revert text size."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2795
msgid "Revert embossed depth."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2905
msgid ""
"Advanced options cannot be changed for the selected font.\n"
"Select another font."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2946
msgid "Revert using of model surface."
msgstr ""

#. TRN EmbossGizmo: font units
#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2959
msgid "points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2968
msgid "Revert gap between characters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2969
msgid "Distance between characters"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2984
msgid "Revert gap between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2985
msgid "Distance between lines"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2999
msgid "Undo boldness"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3000
msgid "Tiny / Wide glyphs"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3010
msgid "Undo letter's skew"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3011
msgid "Italic strength ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3030
msgid "Undo translation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3031
msgid "Distance of the center of the text to the model surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3076
msgid "Undo rotation"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3078
msgid "Rotate text Clock-wise."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3113
msgid "Unlock the text's rotation when moving text along the object's surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3114
msgid "Lock the text's rotation when moving text along the object's surface."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3137
msgid "Select from True Type Collection."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3146
msgid "Set text to face camera"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3153
msgid "Orient the text towards the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3303
msgid "Choose SVG file"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3351
#, boost-format
msgid ""
"Can't load exactly same font(\"%1%\"). Aplication selected a similar "
"one(\"%2%\"). You have to specify font for enable edit text."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:80
msgid "Enter emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:81
msgid "Leave emboss gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:82
msgid "Embossing actions"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:38
#: src/slic3r/GUI/ObjectDataViewModel.cpp:66
msgid "Paint-on supports"
msgstr "Inkleur-supports"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "Automatic painting"
msgstr ""

#. TRN GizmoFdmSupports : message line during the waiting for autogenerated supports
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
msgid "painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
msgid "Clipping of view"
msgstr "Weergave samenvoegen"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
msgid "Reset direction"
msgstr "Reset-richting"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Brush size"
msgstr "Penseelgrootte"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
msgid "Brush shape"
msgstr "Penseelvorm"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1815
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Left mouse button"
msgstr "Linkermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
msgid "Enforce supports"
msgstr "Forceer supportmateriaal"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Right mouse button"
msgstr "Rechtermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:575
msgid "Block supports"
msgstr "Blokkeer supportmateriaal"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Shift + Left mouse button"
msgstr "Shift + linkermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:570
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:247
msgid "Remove selection"
msgstr "Verwijder selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Remove all selection"
msgstr "Verwijder alle selecties"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Sphere"
msgstr "Bol"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:106
#: src/libslic3r/PrintConfig.cpp:1229
msgid "Triangles"
msgstr "Facetten"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
msgid "Highlight overhang by angle"
msgstr "Markeer overhanging bij hoek"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:65
msgid "Enforce"
msgstr "Forceer"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
msgid "Tool type"
msgstr "Tooltype"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:69
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
msgid "Brush"
msgstr "Kwast"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
msgid "Smart fill"
msgstr "Slim vullen"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:72
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Smart fill angle"
msgstr "Slim hoekvullen"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:74
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Split triangles"
msgstr "Split facetten"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:75
msgid "On overhangs only"
msgstr "Alleen bij overhangingen"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:189
#, boost-format
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""
"Selecteert facetten met bepaalde overhangingshoek. Het is mogelijk om "
"overschilderbare facetten te beperken tot alleen voorgeselecteerde facetten "
"als de optie \"%1%\" aan staat."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:232
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:378
msgid "Paints facets according to the chosen painting brush."
msgstr "Schildert facetten volgens de gekozen schilderkwast."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:240
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:391
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr ""
"Schildert naastgelegen facetten van welke de relatieve hoek kleiner dan of "
"gelijk aan een gegeven hoek is."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:244
#, boost-format
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr ""
"Staat toe om alleen te schilderen op facetten geselecteerd door: \"%1%\""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:259
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:419
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
msgid "Paints all facets inside, regardless of their orientation."
msgstr "Kleurt alle binnenfacetten, onafhankelijk van hun oriëntatie."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:268
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:428
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149
msgid "Ignores facets facing away from the camera."
msgstr "Negeer facetten die niet in beeld zijn."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:277
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:437
msgid "Paints only one facet."
msgstr "Schildert slechts één facet."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:300
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:462
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:129
msgid "Alt + Mouse wheel"
msgstr "Alt + scrollwieltje"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:290
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr ""
"Splitst grote facetten in kleinere terwijl het object wordt geschilderd."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:323
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:483
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:167
msgid "Ctrl + Mouse wheel"
msgstr "Ctrl + scrollwieltje"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:328
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:488
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:172
msgid "Reset selection"
msgstr "Reset selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:380
msgid "Block supports by angle"
msgstr "Blokkeer supports op basis van hoek"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:381
msgid "Add supports by angle"
msgstr "Voeg supports to op basis van hoek"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
msgid "Automatic painting requires valid print setup."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
msgid "Automatic painting requires printable object."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:537
msgid "Automatic painting will erase all currently painted areas."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:538
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1123
msgid "Are you sure you want to do it?"
msgstr "Weet u zeker dat u dit wilt doen?"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:542
msgid "Automatic painting support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:573
msgid "Add supports"
msgstr "Voeg supports toe"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:24
msgid "Entering Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:25
msgid "Leaving Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:26
msgid "Paint-on supports editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:75
msgid "Place on face"
msgstr "Plaats op vlak"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:29
msgid "Hollow this object"
msgstr "Dit object uithollen"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
msgid "Preview hollowed and drilled model"
msgstr "Toon voorbeeld van uitgehold model met gat"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
msgid "Offset"
msgstr "Shelldikte"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
msgid "Quality"
msgstr "Kwaliteit"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
#: src/libslic3r/PrintConfig.cpp:4115
msgid "Closing distance"
msgstr "Sluitafstand"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
msgid "Hole diameter"
msgstr "Gatdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Hole depth"
msgstr "Gatdiepte"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Remove selected holes"
msgstr "Verwijder geselecteerde gaten"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
msgid "Remove all holes"
msgstr "Verwijder alle gaten"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
msgid "Show supports"
msgstr "Toon support"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:240
msgid "Add drainage hole"
msgstr "Voeg afvoergat toe"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:359
msgid "Delete drainage hole"
msgstr "Verwijder afvoergat"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:653
msgid "Hollowing parameter change"
msgstr "Wijziging van uitholparameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:737
msgid "Change drainage hole diameter"
msgstr "Verander afvoergatdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:839
msgid "Hollow and drill"
msgstr "Uithollen en gat toevoegen"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:881
msgid "Move drainage hole"
msgstr "Verplaats afvoergat"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:75
msgid "Vertex"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:65
msgid "Edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:67
msgid "Plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:76
msgid "Point on edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77
msgid "Point on circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:78
msgid "Point on plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:88
msgid "Center of edge"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:89
msgid "Center of circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:553
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2035
msgid "Measure"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1235
msgid "Edit to scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1257
#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:118
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:217
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:653
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:670
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:680
#: src/libslic3r/PrintConfig.cpp:4808
msgid "Scale"
msgstr "Verschaal"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1361
msgctxt "Verb"
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1823
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1850
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1856
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1885
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1892
msgid "Unselect feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1829
msgid "Unselect center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1834
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1861
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1897
msgid "Select center"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1839
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1866
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1902
msgid "Unselect point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1845
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1872
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1877
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1909
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1914
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1922
msgid "Select feature"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1877
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1914
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1922
msgid "Select point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1939
msgid "Enable point selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1944
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2013
msgid "Restart selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1954
msgid "Unselect"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2000
#: src/libslic3r/PrintConfig.cpp:2223 src/libslic3r/PrintConfig.cpp:2231
msgid "Length"
msgstr "Lengte"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2005
#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2007
msgid "Selection"
msgstr "Selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2027
#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Copy to clipboard"
msgstr "Kopieer naar klembord"

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2044
msgid "Angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2058
msgid "Perpendicular distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2058
msgid "Distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2068
msgid "Direct distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2078
msgid "Distance XYZ"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:164
msgid "Entering Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:165
msgid "Leaving Measure gizmo"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:166
msgid "Measure gizmo editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:28
#, boost-format
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""
"Uw printer heeft meer extruders dan de multi-materialschilderoptie "
"ondersteunt. Daarom worden alleen de eerste %1% extruders gebruiker voor het "
"schilderen."

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46
#: src/slic3r/GUI/ObjectDataViewModel.cpp:69
msgid "Multimaterial painting"
msgstr "Multi-material schilderen"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
msgid "First color"
msgstr "Eerste kleur"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
msgid "Second color"
msgstr "Tweede kleur"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:649
msgid "Remove painted color"
msgstr "Verwijder geschilderde kleur"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "Clear all"
msgstr "Herstel alles"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
msgid "Bucket fill"
msgstr "Vlakvullen"

#. TRN Means "current color"
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:340
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
msgid "Current"
msgstr ""

#. TRN Means "original color"
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:342
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
msgid "Original"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:404
msgid "Paints neighboring facets that have the same color."
msgstr "Schildert naastgelegen facetten die dezelfde kleur hebben."

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr ""
"Splitst groter facetten in kleinere terwijl het object wordt geschilderd."

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:652
#, boost-format
msgid "Painted using: Extruder %1%"
msgstr "Geschilderd met: Extruder %1%"

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:120
msgid "Entering Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:121
msgid "Leaving Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:122
msgid "Multimaterial painting editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:58
msgid "Move"
msgstr "Verplaats"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:565
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:639
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:679
#: src/libslic3r/PrintConfig.cpp:4793
msgid "Rotate"
msgstr "Roteer"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:629
msgid "Optimize orientation"
msgstr "Optimaliseer oriëntatie"

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:140
msgid "Gizmo-Scale"
msgstr "Verschalen"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250
msgid "Enforce seam"
msgstr "Forceer naad"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:252
msgid "Block seam"
msgstr "Blokkeer naad"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
msgid "Seam painting"
msgstr "Naad kleuren"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:25
msgid "Entering Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:26
msgid "Leaving Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:27
msgid "Paint-on seam editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:105
msgid "Mesh name"
msgstr "Mesh-naam"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:107
msgid "Level of detail"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:108
msgid "Decimate ratio"
msgstr "Decimeerverhouding"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:147
#, boost-format
msgid ""
"Processing model \"%1%\" with more than 1M triangles could be slow. It is "
"highly recommended to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:150
#: src/slic3r/GUI/GUI_Factories.cpp:797
msgid "Simplify model"
msgstr "Vereenvoudig model"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:177
msgid "Simplify"
msgstr "Vereenvoudig"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:190
msgid "Simplification is currently only allowed when a single part is selected"
msgstr ""
"Vereenvoudiging wordt nu alleen ondersteund als een enkel onderdeel is "
"geselecteerd"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:191
#: src/slic3r/GUI/MainFrame.cpp:1246 src/slic3r/GUI/MainFrame.cpp:1717
#: src/slic3r/GUI/PrintHostDialogs.cpp:425
msgid "Error"
msgstr "Fout"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:294
msgid "Extra high"
msgstr "Extra hoog"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295
msgid "High"
msgstr "Hoog"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:296
msgid "Medium"
msgstr "Gemiddeld"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297
msgid "Low"
msgstr "Laag"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:298
msgid "Extra low"
msgstr "Extra laag"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:321
msgid ""
"A multipart object can be simplified using only a Level of detail. If you "
"want to enter a Decimate ratio, do the simplification separately."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:350
#, c-format, boost-format
msgid "%d triangles"
msgstr "%d facetten"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:353
msgid "Show wireframe"
msgstr "Toon draadmodel"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:359
msgid "Operation already cancelling. Please wait few seconds."
msgstr "Operatie wordt geannuleerd. Even geduld alstublieft."

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:368
msgid "Can't apply when proccess preview."
msgstr "Kan niet toepassen tijdens verwerken van sliceweergave."

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:375
#, boost-format
msgid "Process %1% / 100"
msgstr "Proces %1% / 100"

#. TRN %1% = volumes name
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:541
#, boost-format
msgid "Simplify %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:542
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"simplifying the mesh."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:68
msgid "Entering SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:69
msgid "Leaving SLA support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:36
msgid "Head diameter"
msgstr "Kopdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:37
msgid "Lock supports under new islands"
msgstr "Vergrendel support onder nieuwe eilanden"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273
msgid "Remove selected points"
msgstr "Verwijder geselecteerde punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
msgid "Remove all points"
msgstr "Verwijder alle punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1276
msgid "Apply changes"
msgstr "Wijzigingen toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1277
msgid "Discard changes"
msgstr "Wijzigingen afwijzen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
msgid "Minimal points distance"
msgstr "Minimale puntafstand"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
#: src/libslic3r/PrintConfig.cpp:3945
msgid "Support points density"
msgstr "Dichtheid van supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1279
msgid "Auto-generate points"
msgstr "Genereer automatisch punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Manual editing"
msgstr "Handmatig bewerken"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:313
msgid "Add support point"
msgstr "Voeg supportpunt toe"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:466
msgid "Delete support point"
msgstr "Verwijder supportpunt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:632
msgid "Change point head diameter"
msgstr "Wijzig puntkopdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:702
msgid "Support parameter change"
msgstr "Wijzig supportparameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:818
msgid "SLA Support Points"
msgstr "SLA-supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:823
msgid "Do you want to save your manually edited support points?"
msgstr "Wilt u handmatig aangepaste supportpunten opslaan?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:824
msgid "Save support points?"
msgstr "Supportpunten opslaan?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:885
msgid "Move support point"
msgstr "Verplaats supportpunt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:992
msgid "Support points edit"
msgstr "Bewerk supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1122
msgid "Autogeneration will erase all manually edited points."
msgstr ""
"Automatisch genereren zal alle handmatig aangepaste punten verwijderen."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129
msgid "Autogenerate support points"
msgstr "Automatisch gegenereerde supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
msgid "SLA gizmo keyboard shortcuts"
msgstr "SLA sneltoetsen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1247
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr "Let op: sommige sneltoetsen werken alleen in bewerkmodus."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1265
msgid "Add point"
msgstr "Voeg punt toe"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
msgid "Remove point"
msgstr "Verwijder punt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
msgid "Move point"
msgstr "Verplaats punt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
msgid "Add point to selection"
msgstr "Voeg punt toe aan selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
msgid "Remove point from selection"
msgstr "Verwijder punt uit selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
msgid "Select by rectangle"
msgstr "Selecteer met boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
msgid "Deselect by rectangle"
msgstr "Deselecteer met boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
msgid "Select all points"
msgstr "Selecteer alle punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
msgid "Mouse wheel"
msgstr "Scrollwieltje"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
msgid "Move clipping plane"
msgstr "Verplaats snijvlak"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1275
msgid "Reset clipping plane"
msgstr "Reset snijvlak"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1278
msgid "Switch to editing mode"
msgstr "Schakel over naar bewerkmodus"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:205
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr ""
"FOUT: Sluit alstublieft eerst alle bewerkingen zoals beschikbaar op de "
"linker werkbalk"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1011
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr ""
"U bewerkt momenteel SLA-supportpunten. Pas de wijzigingen toe of negeer ze "
"eerst."

#: src/slic3r/GUI/GUI.cpp:287
msgid "Undefined"
msgstr "Ongedefinieerd"

#: src/slic3r/GUI/GUI.cpp:308
#, boost-format
msgid "%1% was substituted with %2%"
msgstr "%1% is gesubstitueerd met %2%"

#: src/slic3r/GUI/GUI.cpp:317
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""
"Waarschijnlijk is de configuratie gemaakt door een nieuwere versie van "
"PrusaSlicer of een afgeleide daarvan."

#: src/slic3r/GUI/GUI.cpp:318
msgid "The following values were substituted:"
msgstr "De volgende waarden zijn gesubstitueerd:"

#: src/slic3r/GUI/GUI.cpp:319
msgid "Review the substitutions and adjust them if needed."
msgstr "Beoordeel de substituties en pas aan indien gewenst."

#: src/slic3r/GUI/GUI.cpp:329 src/slic3r/GUI/Plater.cpp:853
msgid "SLA print settings"
msgstr "SLA-printinstellingen"

#: src/slic3r/GUI/GUI.cpp:333 src/slic3r/GUI/PhysicalPrinterDialog.cpp:158
msgid "Physical Printer"
msgstr "Fysieke printer"

#: src/slic3r/GUI/GUI.cpp:346
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr ""
"Configuratiebundel is geladen, hoewel sommige configuratiewaarden niet "
"herkend werden."

#: src/slic3r/GUI/GUI.cpp:356
#, boost-format
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr ""
"Configuratiebestand \"%1%\" is geladen, hoewel sommige configuratiewaarden "
"niet herkend werden."

#: src/slic3r/GUI/GUI_App.cpp:286
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""
"is gebaseerd op Slic3R van Allessandro Ranellucci en de RepRap-community."

#: src/slic3r/GUI/GUI_App.cpp:287
msgid "Developed by Prusa Research."
msgstr "Ontwikkeld door Prusa Research."

#: src/slic3r/GUI/GUI_App.cpp:289
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""
"Bijdragen van Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik, Simon Tillema en vele "
"anderen."

#: src/slic3r/GUI/GUI_App.cpp:290
msgid "Artwork model by Creative Tools"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:431
#, boost-format
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""
"Beginnend bij %1% 2.3, de configuratie-locatie op Linux is veranderd "
"(volgens de XDG Base Directory Specification) naar\n"
"%2%.\n"
"\n"
"Deze locatie bestaat nog niet (misschien omdat je een nieuwere versie voor "
"het eerst draait).\n"
"Desondanks is een oude %1%-configuratie-locatie gedetecteerd in\n"
"%3%.\n"
"\n"
"Overweeg om de inhoud uit de oude locatie naar de nieuwe te verplaatsen om "
"toegang te krijgen tot je profielen, etc.\n"
"Let op dat je besluit %1% in de toekomst te downgraden als je de vorige "
"locatie weer wil gebruiken.\n"
"\n"
"Wat wil je nu doen?"

#: src/slic3r/GUI/GUI_App.cpp:439
#, c-format, boost-format
msgid "%s - BREAKING CHANGE"
msgstr "%s- INGRIJPENDE WIJZIGING"

#: src/slic3r/GUI/GUI_App.cpp:441
msgid "Quit, I will move my data now"
msgstr "Afsluiten, ik zal mijn data nu verplaatsen"

#: src/slic3r/GUI/GUI_App.cpp:441
msgid "Start the application"
msgstr "Start het programma"

#: src/slic3r/GUI/GUI_App.cpp:736
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""
"%s heeft een fout opgelopen. Dit komt mogelijk door een geheugentekort. Als "
"u zeker weet genoeg RAM geheugen te hebben, kan dit ook een andere fout "
"zijn. We waarderen het als u dit meldt.\n"
"\n"
"Het programma zal nu afsluiten."

#: src/slic3r/GUI/GUI_App.cpp:739
msgid "Fatal error"
msgstr "Fatale fout"

#: src/slic3r/GUI/GUI_App.cpp:743
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""
"PrusaSlicer heeft een vertalingsprobleem opgelopen. We zouden het waarderen "
"als u dit meldt bij het PrusaSlicer team; welke taal actief is en in welk "
"scenario dit gebeurde. Hartelijk dank.\n"
"\n"
"Het programma zal nu sluiten."

#: src/slic3r/GUI/GUI_App.cpp:746
msgid "Critical error"
msgstr "Kritische fout"

#: src/slic3r/GUI/GUI_App.cpp:751
#, boost-format
msgid "Internal error: %1%"
msgstr "Interne fout: %1%"

#: src/slic3r/GUI/GUI_App.cpp:1015
#, boost-format
msgid "You are opening %1% version %2%."
msgstr "U opent %1%, versie %2%."

#: src/slic3r/GUI/GUI_App.cpp:1018
#, boost-format
msgid ""
"The active configuration was created by <b>%1% %2%</b>,\n"
"while a newer configuration was found in <b>%3%</b>\n"
"created by <b>%1% %4%</b>.\n"
"\n"
"Shall the newer configuration be imported?\n"
"If so, your active configuration will be backed up before importing the new "
"configuration."
msgstr ""
"De actieve configuratie is aangemaakt door <b>%1% %2%</b>\n"
"terwijl een nieuwere configuratie is gevonden in <b>%3%</b>,\n"
"aangemaakt door <b>%1% %4%</b>.\n"
"\n"
"Moet de nieuwe configuratie worden geïmporteerd?\n"
"In dat geval wordt uw actieve configuratie opgeslagen voor het importeren "
"van de nieuwe configuratie."

#: src/slic3r/GUI/GUI_App.cpp:1026
#, boost-format
msgid ""
"An existing configuration was found in <b>%3%</b>\n"
"created by <b>%1% %2%</b>.\n"
"\n"
"Shall this configuration be imported?"
msgstr ""
"Een bestaande configuratie is gevonden in <b>%3%</b>,\n"
"aangemaakt door b>%1% %2%</b>.\n"
"Moet de nieuwe configuratie worden geïmporteerd?"

#: src/slic3r/GUI/GUI_App.cpp:1034
msgid "Import"
msgstr "Importeer"

#: src/slic3r/GUI/GUI_App.cpp:1035
msgid "Don't import"
msgstr "Niet importeren"

#: src/slic3r/GUI/GUI_App.cpp:1043
msgid "Continue and import newer configuration?"
msgstr "Doorgaan en nieuwere configuraties importeren?"

#: src/slic3r/GUI/GUI_App.cpp:1102
msgid ""
"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
"available in the system.\n"
"Please download and install a 64 bit build of PrusaSlicer from https://www."
"prusa3d.cz/prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""
"U draait een 32-bit versie van PrusaSlicer op 64-bit Windows.\n"
"32-bit versies van PrusaSlicer kunnen probelemen veroorzaken met het "
"beschikbare RAM-geheugen in het systeem.\n"
"Download en installeer alstublieft een 64-bit versie van PrusaSlicer van "
"https://www.prusa3d.com/prusaslicer/.\n"
"Wilt u doorgaan?"

#: src/slic3r/GUI/GUI_App.cpp:1189
#, c-format, boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""
"%s\n"
"Wilt u doorgaan?"

#: src/slic3r/GUI/GUI_App.cpp:1191 src/slic3r/GUI/GUI_App.cpp:3288
#: src/slic3r/GUI/Plater.cpp:1730 src/slic3r/GUI/UnsavedChangesDialog.cpp:920
msgid "Remember my choice"
msgstr "Onthoud mijn keuze"

#: src/slic3r/GUI/GUI_App.cpp:1233
msgid "Loading configuration"
msgstr "Configuratie aan het laden"

#: src/slic3r/GUI/GUI_App.cpp:1264
#, boost-format
msgid "New prerelease version %1% is available."
msgstr "Nieuwe pre-release versie %1% is beschikbaar."

#: src/slic3r/GUI/GUI_App.cpp:1265
msgid "See Releases page."
msgstr "Zie Release-pagina."

#: src/slic3r/GUI/GUI_App.cpp:1320
msgid "Preparing settings tabs"
msgstr "Instellingentab voorbereiden"

#: src/slic3r/GUI/GUI_App.cpp:1400 src/slic3r/GUI/Preferences.cpp:382
msgid "Restore window position on start"
msgstr "Herstel vensterpositie na opstarten"

#: src/slic3r/GUI/GUI_App.cpp:1402
msgid "PrusaSlicer started after a crash"
msgstr "PrusaSlicer is opgestart na een crash"

#: src/slic3r/GUI/GUI_App.cpp:1403
#, boost-format
msgid ""
"PrusaSlicer crashed last time when attempting to set window position.\n"
"We are sorry for the inconvenience, it unfortunately happens with certain "
"multiple-monitor setups.\n"
"More precise reason for the crash: \"%1%\".\n"
"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
"\n"
"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
"Otherwise, the application will most likely crash again next time."
msgstr ""
"PrusaSlicer is de vorige keer gecrasht tijdens een poging om de "
"vensterpositie in te stellen.\n"
"Sorry voor het ongemak. Het gebeurt helaas met sommige meer-schermen "
"opstellingen.\n"
"Exacte reden van de crash: \"%1%\".\n"
"For meer informatie, zie onze Github probleemtracker: \"%2%\" en \"%3%\"\n"
"\n"
"Overweeg om \"%4%\" in voorkeuren uit te zetten om dit probleem te "
"voorkomen. Waarschijnlijk zal anders het programma de volgende keer weer "
"crashen."

#: src/slic3r/GUI/GUI_App.cpp:1415
#, boost-format
msgid "Disable \"%1%\""
msgstr "\"%1%\" uitschakelen"

#: src/slic3r/GUI/GUI_App.cpp:1416
#, boost-format
msgid "Leave \"%1%\" enabled"
msgstr "Laat \"%1%\" aanstaan"

#: src/slic3r/GUI/GUI_App.cpp:1787
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""
"Je hebt de volgende presets opgeslagen voor de printhost-uploadwachtrij"

#: src/slic3r/GUI/GUI_App.cpp:1791
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""
"Maar sinds deze versie van PrusaSlicer, wordt de informatie niet meer "
"getoond in de printerinstellingen.\n"
"Instellingen zijn beschikbaar in de fysieke-printerinstellingen."

#: src/slic3r/GUI/GUI_App.cpp:1793
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""
"Nieuwe printers worden automatisch \"Printer N\" genoemd bij het aanmaken.\n"
"Let op: deze naam kan later worden aangepast in de fysieke-"
"printerinstellingen"

#: src/slic3r/GUI/GUI_App.cpp:1797 src/slic3r/GUI/PhysicalPrinterDialog.cpp:793
msgid "Information"
msgstr "Informatie"

#: src/slic3r/GUI/GUI_App.cpp:1810 src/slic3r/GUI/GUI_App.cpp:1821
msgid "Recreating"
msgstr "Opnieuw aanmaken"

#: src/slic3r/GUI/GUI_App.cpp:1824
msgid "Loading of current presets"
msgstr "Laden van huidige presets"

#: src/slic3r/GUI/GUI_App.cpp:1829
msgid "Loading of a mode view"
msgstr "Laden van de weergavemodus"

#: src/slic3r/GUI/GUI_App.cpp:1968
msgid "Choose one file (3MF/AMF):"
msgstr "Kies een .3MF- of .AMF-bestand:"

#: src/slic3r/GUI/GUI_App.cpp:1980
msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1991
msgid "Choose ZIP file"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2003
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr "Kies een bestand (.gcode/.GCO/.G/.ngc):"

#: src/slic3r/GUI/GUI_App.cpp:2014
msgid "Changing of an application language"
msgstr "Veranderen van de taal van het programma"

#: src/slic3r/GUI/GUI_App.cpp:2155
msgid "Select the language"
msgstr "Taalselectie"

#: src/slic3r/GUI/GUI_App.cpp:2155
msgid "Language"
msgstr "Wijzig taal (change language)"

#: src/slic3r/GUI/GUI_App.cpp:2319
msgid "modified"
msgstr "aangepast"

#: src/slic3r/GUI/GUI_App.cpp:2358
msgid ""
"Simple mode supports manipulation with single-part object(s)\n"
"or object(s) with support modifiers only."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2360
msgid "Please check your object list before mode changing."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2361
msgid "Change application mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2392
#, c-format, boost-format
msgid "Run %s"
msgstr "Voer %s uit"

#: src/slic3r/GUI/GUI_App.cpp:2396
msgid "&Configuration Snapshots"
msgstr "Configuratiesnapshots"

#: src/slic3r/GUI/GUI_App.cpp:2396
msgid "Inspect / activate configuration snapshots"
msgstr "Inspecteer/activeer configuratiesnapshots"

#: src/slic3r/GUI/GUI_App.cpp:2397
msgid "Take Configuration &Snapshot"
msgstr "Neem configuratiesnapshot"

#: src/slic3r/GUI/GUI_App.cpp:2397
msgid "Capture a configuration snapshot"
msgstr "Neem een configuratiesnapshot op"

#: src/slic3r/GUI/GUI_App.cpp:2398
msgid "Check for Configuration Updates"
msgstr "Controleer op configuratie-updates"

#: src/slic3r/GUI/GUI_App.cpp:2398
msgid "Check for configuration updates"
msgstr "Controleer op configuratie-updates"

#: src/slic3r/GUI/GUI_App.cpp:2399
msgid "Check for Application Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2399
msgid "Check for new version of application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2406
msgid "&Preferences"
msgstr "Voorkeuren"

#: src/slic3r/GUI/GUI_App.cpp:2412
msgid "Application preferences"
msgstr "Programmavoorkeuren"

#: src/slic3r/GUI/GUI_App.cpp:2417
msgid "Simple View Mode"
msgstr "Eenvoudige weergave"

#: src/slic3r/GUI/GUI_App.cpp:2419
msgid "Advanced View Mode"
msgstr "Geavanceerde weergave"

#: src/slic3r/GUI/GUI_App.cpp:2420
msgid "Expert View Mode"
msgstr "Expertweergave"

#: src/slic3r/GUI/GUI_App.cpp:2425
msgid "Mode"
msgstr "Modus"

#: src/slic3r/GUI/GUI_App.cpp:2425
#, c-format, boost-format
msgid "%s View Mode"
msgstr "%s-weergavemodus"

#: src/slic3r/GUI/GUI_App.cpp:2428
msgid "&Language"
msgstr "Wijzig taal (change language)"

#: src/slic3r/GUI/GUI_App.cpp:2431
msgid "Flash Printer &Firmware"
msgstr "Flash printer firmware"

#: src/slic3r/GUI/GUI_App.cpp:2431
msgid "Upload a firmware image into an Arduino based printer"
msgstr "Upload een firmwarebestand op een Arduino-gebaseerde printer"

#: src/slic3r/GUI/GUI_App.cpp:2454
msgid "Taking a configuration snapshot"
msgstr "Neemt een configuratiesnapshot"

#: src/slic3r/GUI/GUI_App.cpp:2455
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr ""
"Sommige presets zijn aangepast en onopgeslagen instellingen worden niet "
"meegenomen bij de configuratiesnapshot."

#: src/slic3r/GUI/GUI_App.cpp:2456
msgid "Snapshot name"
msgstr "Snapshotnaam"

#: src/slic3r/GUI/GUI_App.cpp:2472
msgid "Loading a configuration snapshot"
msgstr "Laad een configuratiesnapshot"

#: src/slic3r/GUI/GUI_App.cpp:2481
#, boost-format
msgid "Continue to activate a configuration snapshot %1%?"
msgstr "Doorgaan om configuratiesnapshot %1% te activeren?"

#: src/slic3r/GUI/GUI_App.cpp:2495
msgid "Failed to activate configuration snapshot."
msgstr "Activeren van configuratiesnapshot mislukt."

#: src/slic3r/GUI/GUI_App.cpp:2515
msgid "Language selection"
msgstr "Taalselectie"

#: src/slic3r/GUI/GUI_App.cpp:2518
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""
"Het veranderen van de taal zorgt dat het programma opnieuw opstart.\n"
"U verliest de geladen inhoud zoals getoond in de modelweergave."

#: src/slic3r/GUI/GUI_App.cpp:2520 src/slic3r/GUI/Preferences.cpp:706
#: src/slic3r/GUI/Selection.cpp:1419
msgid "Do you want to proceed?"
msgstr ""
"Weet u zeker dat u door wilt gaan?\n"
"Do you want to proceed?"

#: src/slic3r/GUI/GUI_App.cpp:2547
msgid "&Configuration"
msgstr "Configuratie"

#: src/slic3r/GUI/GUI_App.cpp:2555
msgid "Restart application"
msgstr "Herstart programma"

#: src/slic3r/GUI/GUI_App.cpp:2721
msgid "For new project all modifications will be reseted"
msgstr "Voor nieuwe projecten worden alle aanpassingen gereset"

#: src/slic3r/GUI/GUI_App.cpp:2759
msgid "Loading a new project while the current project is modified."
msgstr "Laad een nieuw project terwijl het huidige project is aangepast."

#: src/slic3r/GUI/GUI_App.cpp:2762
msgid "Project is loading"
msgstr "Project is aan het laden"

#: src/slic3r/GUI/GUI_App.cpp:2762
msgid "Opening new project while some presets are unsaved."
msgstr "Openen van nieuw project terwijl sommige presets niet opgeslagen zijn."

#: src/slic3r/GUI/GUI_App.cpp:2781
msgid "The uploads are still ongoing"
msgstr "De uploads zijn nog bezig"

#: src/slic3r/GUI/GUI_App.cpp:2781
msgid "Stop them and continue anyway?"
msgstr "Stop ze en ga toch door?"

#: src/slic3r/GUI/GUI_App.cpp:2785
msgid "Ongoing uploads"
msgstr "Lopende uploads"

#: src/slic3r/GUI/GUI_App.cpp:3021
msgid ""
"It's impossible to print object(s) which contains parameter modifiers with "
"SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3022 src/slic3r/GUI/Jobs/SLAImportJob.cpp:149
#: src/slic3r/GUI/Plater.cpp:2527
msgid "Please check your object list before preset changing."
msgstr "Controleer de objectenlijst voor het wijzigen van de preset."

#: src/slic3r/GUI/GUI_App.cpp:3056
msgid "Configuration is editing from ConfigWizard"
msgstr "Configuratie is aangepast van de configuratiewizard"

#: src/slic3r/GUI/GUI_App.cpp:3074
#, boost-format
msgid "Welcome to %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3076
#, boost-format
msgid ""
"Do you wish to register downloads from <b>Printables.com</b>\n"
"for this <b>%1% %2%</b> executable?\n"
"\n"
"Downloads can be registered for only 1 executable at time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3104
msgid "Select a gcode file:"
msgstr "Selecteer een .gcode-bestand:"

#: src/slic3r/GUI/GUI_App.cpp:3287 src/slic3r/GUI/GUI_App.cpp:3310
msgid "Open hyperlink in default browser?"
msgstr "Open hyperlinks in de standaardbrowser?"

#: src/slic3r/GUI/GUI_App.cpp:3287 src/slic3r/GUI/GUI_App.cpp:3310
msgid "PrusaSlicer: Open hyperlink"
msgstr "PrusaSlicer: Open hyperlink"

#: src/slic3r/GUI/GUI_App.cpp:3292 src/slic3r/GUI/Preferences.cpp:570
msgid "Suppress to open hyperlink in browser"
msgstr "Hyperlinks openen in browser uitzetten"

#: src/slic3r/GUI/GUI_App.cpp:3294 src/slic3r/GUI/Plater.cpp:1736
msgid "PrusaSlicer will remember your choice."
msgstr "PrusaSlicer onthoudt uw keuze."

#: src/slic3r/GUI/GUI_App.cpp:3295
msgid "You will not be asked about it again on hyperlinks hovering."
msgstr "U wordt niet opnieuw gevraagd over het bewegen over hyperlinks."

#: src/slic3r/GUI/GUI_App.cpp:3296 src/slic3r/GUI/Plater.cpp:1740
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to changes your choice."
msgstr ""
"Ga naar Voorkeuren en controleer \"%1%\"\n"
"om uw keuze te wijzigen."

#: src/slic3r/GUI/GUI_App.cpp:3298 src/slic3r/GUI/Plater.cpp:1742
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
msgid "PrusaSlicer: Don't ask me again"
msgstr "PrusaSlicer: vraag het niet nogmaals"

#: src/slic3r/GUI/GUI_App.cpp:3372
msgid "Check for application update has failed."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3373
#, boost-format
msgid "You are currently running the latest released version %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3376
#, boost-format
msgid ""
"There are no new released versions online. The latest release version is %1%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3437
#, boost-format
msgid "Downloading %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3447
msgid "Downloading of the new version is in progress. Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3465
msgid ""
"Could not start URL download. Destination folder is not set. Please choose "
"destination folder in Configuration Wizard."
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:64 src/slic3r/GUI/GUI_Init.cpp:67
msgid "PrusaSlicer GUI initialization failed"
msgstr "Initialisatie van PrusaSlicer GUI mislukt"

#: src/slic3r/GUI/GUI_Init.cpp:67
#, boost-format
msgid "Fatal error, exception catched: %1%"
msgstr "Fatale fout, uitzondering gevonden: %1%"

#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
#: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:421
#: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:472
#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:870
#: src/libslic3r/PrintConfig.cpp:879 src/libslic3r/PrintConfig.cpp:1290
#: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1611
#: src/libslic3r/PrintConfig.cpp:1993 src/libslic3r/PrintConfig.cpp:2068
#: src/libslic3r/PrintConfig.cpp:2302 src/libslic3r/PrintConfig.cpp:2994
#: src/libslic3r/PrintConfig.cpp:3002 src/libslic3r/PrintConfig.cpp:3062
#: src/libslic3r/PrintConfig.cpp:3070 src/libslic3r/PrintConfig.cpp:3260
msgid "Layers and Perimeters"
msgstr "Lagen en perimeters"

#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
#: src/slic3r/GUI/Tab.cpp:1501 src/slic3r/GUI/Tab.cpp:1503
#: src/libslic3r/ExtrusionRole.cpp:48 src/libslic3r/ExtrusionRole.cpp:79
#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2133
#: src/libslic3r/PrintConfig.cpp:2142 src/libslic3r/PrintConfig.cpp:2151
#: src/libslic3r/PrintConfig.cpp:2161 src/libslic3r/PrintConfig.cpp:2170
#: src/libslic3r/PrintConfig.cpp:2604 src/libslic3r/PrintConfig.cpp:2610
#: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2631
#: src/libslic3r/PrintConfig.cpp:2641 src/libslic3r/PrintConfig.cpp:2648
#: src/libslic3r/PrintConfig.cpp:2664 src/libslic3r/PrintConfig.cpp:2680
#: src/libslic3r/PrintConfig.cpp:2701 src/libslic3r/PrintConfig.cpp:2714
#: src/libslic3r/PrintConfig.cpp:2730 src/libslic3r/PrintConfig.cpp:2745
#: src/libslic3r/PrintConfig.cpp:2763 src/libslic3r/PrintConfig.cpp:2773
#: src/libslic3r/PrintConfig.cpp:2782 src/libslic3r/PrintConfig.cpp:2793
#: src/libslic3r/PrintConfig.cpp:2805 src/libslic3r/PrintConfig.cpp:2819
#: src/libslic3r/PrintConfig.cpp:2827 src/libslic3r/PrintConfig.cpp:2828
#: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2851
#: src/libslic3r/PrintConfig.cpp:2861 src/libslic3r/PrintConfig.cpp:2875
#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2895
#: src/libslic3r/PrintConfig.cpp:2907 src/libslic3r/PrintConfig.cpp:2918
#: src/libslic3r/PrintConfig.cpp:2931 src/libslic3r/PrintConfig.cpp:2944
#: src/libslic3r/PrintConfig.cpp:2960 src/libslic3r/PrintConfig.cpp:2970
msgid "Support material"
msgstr "Support"

#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
#: src/libslic3r/PrintConfig.cpp:3216 src/libslic3r/PrintConfig.cpp:3224
msgid "Wipe options"
msgstr "Afveegopties"

#: src/slic3r/GUI/GUI_Factories.cpp:65
msgid "Pad and Support"
msgstr "Basisplaat en support"

#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/Tab.cpp:1467
#: src/libslic3r/ExtrusionRole.cpp:44 src/libslic3r/ExtrusionRole.cpp:71
#: src/libslic3r/PrintConfig.cpp:1627 src/libslic3r/PrintConfig.cpp:1633
#: src/libslic3r/PrintConfig.cpp:1645 src/libslic3r/PrintConfig.cpp:1655
#: src/libslic3r/PrintConfig.cpp:1663 src/libslic3r/PrintConfig.cpp:1665
msgid "Ironing"
msgstr "Strijken"

#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1341
#: src/libslic3r/PrintConfig.cpp:1342 src/libslic3r/PrintConfig.cpp:1354
#: src/libslic3r/PrintConfig.cpp:1364
msgid "Fuzzy Skin"
msgstr "Oneffen oppervlak"

#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/Tab.cpp:1545
#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:533
#: src/libslic3r/PrintConfig.cpp:546 src/libslic3r/PrintConfig.cpp:555
#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:573
#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:1381
#: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:1664
#: src/libslic3r/PrintConfig.cpp:2058 src/libslic3r/PrintConfig.cpp:2392
#: src/libslic3r/PrintConfig.cpp:2445 src/libslic3r/PrintConfig.cpp:3047
msgid "Speed"
msgstr "Snelheid"

#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1595
#: src/slic3r/GUI/Tab.cpp:2400 src/libslic3r/PrintConfig.cpp:887
#: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:2035
#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2693
#: src/libslic3r/PrintConfig.cpp:2721
msgid "Extruders"
msgstr "Extruders"

#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:838
#: src/libslic3r/PrintConfig.cpp:951 src/libslic3r/PrintConfig.cpp:1276
#: src/libslic3r/PrintConfig.cpp:1545 src/libslic3r/PrintConfig.cpp:2044
#: src/libslic3r/PrintConfig.cpp:2433 src/libslic3r/PrintConfig.cpp:2702
#: src/libslic3r/PrintConfig.cpp:3034
msgid "Extrusion Width"
msgstr "Extrusiebreedte"

#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1487
#: src/libslic3r/PrintConfig.cpp:629 src/libslic3r/PrintConfig.cpp:640
#: src/libslic3r/PrintConfig.cpp:653
msgid "Skirt and brim"
msgstr "Skirt en brim"

#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:437
#: src/slic3r/GUI/Tab.cpp:5150 src/slic3r/GUI/Tab.cpp:5152
#: src/libslic3r/PrintConfig.cpp:3402 src/libslic3r/PrintConfig.cpp:3411
#: src/libslic3r/PrintConfig.cpp:3420 src/libslic3r/PrintConfig.cpp:3430
#: src/libslic3r/PrintConfig.cpp:3440 src/libslic3r/PrintConfig.cpp:3461
#: src/libslic3r/PrintConfig.cpp:3484 src/libslic3r/PrintConfig.cpp:3491
#: src/libslic3r/PrintConfig.cpp:3506 src/libslic3r/PrintConfig.cpp:3516
#: src/libslic3r/PrintConfig.cpp:3525 src/libslic3r/PrintConfig.cpp:3538
#: src/libslic3r/PrintConfig.cpp:3548 src/libslic3r/PrintConfig.cpp:3562
#: src/libslic3r/PrintConfig.cpp:3572 src/libslic3r/PrintConfig.cpp:3917
#: src/libslic3r/PrintConfig.cpp:3939 src/libslic3r/PrintConfig.cpp:3946
#: src/libslic3r/PrintConfig.cpp:3954
msgid "Supports"
msgstr "Support"

#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:592
#: src/slic3r/GUI/Tab.cpp:5163 src/slic3r/GUI/Tab.cpp:5164
#: src/slic3r/GUI/Tab.cpp:5229 src/libslic3r/PrintConfig.cpp:3962
#: src/libslic3r/PrintConfig.cpp:3969 src/libslic3r/PrintConfig.cpp:3983
#: src/libslic3r/PrintConfig.cpp:3994 src/libslic3r/PrintConfig.cpp:4004
#: src/libslic3r/PrintConfig.cpp:4026 src/libslic3r/PrintConfig.cpp:4037
#: src/libslic3r/PrintConfig.cpp:4044 src/libslic3r/PrintConfig.cpp:4051
#: src/libslic3r/PrintConfig.cpp:4062 src/libslic3r/PrintConfig.cpp:4071
#: src/libslic3r/PrintConfig.cpp:4080
msgid "Pad"
msgstr "Basisplaat"

#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:5181
#: src/slic3r/GUI/Tab.cpp:5182 src/libslic3r/SLA/Hollowing.cpp:82
#: src/libslic3r/SLA/Hollowing.cpp:87 src/libslic3r/SLA/Hollowing.cpp:102
#: src/libslic3r/SLA/Hollowing.cpp:111 src/libslic3r/PrintConfig.cpp:4090
#: src/libslic3r/PrintConfig.cpp:4097 src/libslic3r/PrintConfig.cpp:4107
#: src/libslic3r/PrintConfig.cpp:4116
msgid "Hollowing"
msgstr "Uithollen"

#: src/slic3r/GUI/GUI_Factories.cpp:159
msgid "Add part"
msgstr "Voeg onderdeel toe"

#: src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Add negative volume"
msgstr "Voeg negatief volume toe"

#: src/slic3r/GUI/GUI_Factories.cpp:161
msgid "Add modifier"
msgstr "Voeg modificator toe"

#: src/slic3r/GUI/GUI_Factories.cpp:162
msgid "Add support blocker"
msgstr "Voeg supportblokkering toe"

#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Add support enforcer"
msgstr "Voeg supportforcering toe"

#: src/slic3r/GUI/GUI_Factories.cpp:169
msgid "Add text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:170
msgid "Add negative text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:171
msgid "Add text modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:307
msgid "Select showing settings"
msgstr "Selecteer getoonde instellingen"

#: src/slic3r/GUI/GUI_Factories.cpp:414 src/slic3r/GUI/GUI_Factories.cpp:419
#: src/slic3r/GUI/GUI_Factories.cpp:625 src/slic3r/GUI/GUI_Factories.cpp:631
#, c-format, boost-format
msgid "Quick Add Settings (%s)"
msgstr "Snel instellingen toevoegen (%s)"

#: src/slic3r/GUI/GUI_Factories.cpp:460
msgid "Remove the selected object"
msgstr "Verwijder het geselecteerde object"

#: src/slic3r/GUI/GUI_Factories.cpp:475
msgid "Load"
msgstr "Laad"

#: src/slic3r/GUI/GUI_Factories.cpp:481 src/slic3r/GUI/GUI_Factories.cpp:566
#: src/slic3r/GUI/GUI_Factories.cpp:570
msgid "Box"
msgstr "Blok"

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Cylinder"
msgstr "Cilinder"

#: src/slic3r/GUI/GUI_Factories.cpp:481
msgid "Slab"
msgstr "Plaat"

#: src/slic3r/GUI/GUI_Factories.cpp:493
msgid "Gallery"
msgstr "Galerij"

#: src/slic3r/GUI/GUI_Factories.cpp:529 src/slic3r/GUI/GUI_Factories.cpp:549
#: src/slic3r/GUI/GUI_ObjectList.cpp:671
msgid "Text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:555 src/slic3r/GUI/GUI_Factories.cpp:558
#: src/slic3r/GUI/GUI_Factories.cpp:595
msgid "Height range Modifier"
msgstr "Modificator voor hoogtebereik"

#: src/slic3r/GUI/GUI_Factories.cpp:604
msgid "Add settings"
msgstr "Voeg instellingen toe"

#: src/slic3r/GUI/GUI_Factories.cpp:695
msgid "Change type"
msgstr "Wijzig type"

#: src/slic3r/GUI/GUI_Factories.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Object"
msgstr "Stel in als apart object"

#: src/slic3r/GUI/GUI_Factories.cpp:717
msgid "Set as a Separated Objects"
msgstr "Stel in als aparte objecten"

#: src/slic3r/GUI/GUI_Factories.cpp:727
msgid "Printable"
msgstr "Printbaar"

#: src/slic3r/GUI/GUI_Factories.cpp:763 src/slic3r/GUI/GUI_ObjectList.cpp:2076
#: src/slic3r/GUI/GUI_ObjectList.cpp:2588
msgid "Invalidate cut info"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:778
msgid "Rename"
msgstr "Hernoem"

#: src/slic3r/GUI/GUI_Factories.cpp:788
msgid "Fix through the Netfabb"
msgstr "Repareer met NetFabb"

#: src/slic3r/GUI/GUI_Factories.cpp:807
msgid "Export as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:818
msgid "Reload the selected volumes from disk"
msgstr "Herlaad de geselecteerde volumes vanaf schijf"

#: src/slic3r/GUI/GUI_Factories.cpp:825 src/slic3r/GUI/Plater.cpp:3621
msgid "Replace with STL"
msgstr "Vervang met STL"

#: src/slic3r/GUI/GUI_Factories.cpp:825
msgid "Replace the selected volume with new STL"
msgstr "Vervang het geselecteerde volume met nieuwe STL"

#: src/slic3r/GUI/GUI_Factories.cpp:832
msgid "Set extruder for selected items"
msgstr "Stel extruder in voor de geselecteerde items"

#: src/slic3r/GUI/GUI_Factories.cpp:870 src/slic3r/GUI/Tab.cpp:5157
#: src/slic3r/Utils/Repetier.cpp:145 src/slic3r/Utils/Repetier.cpp:226
#: src/libslic3r/PrintConfig.cpp:736 src/libslic3r/PrintConfig.cpp:2810
#: src/libslic3r/PrintConfig.cpp:3927
msgid "Default"
msgstr "Standaard"

#: src/slic3r/GUI/GUI_Factories.cpp:887
msgid "Scale to print volume"
msgstr "Verschaal tot printvolume"

#: src/slic3r/GUI/GUI_Factories.cpp:887
msgid "Scale the selected object to fit the print volume"
msgstr "Verschaal het geselecteerde object tot deze in het printvolume past"

#: src/slic3r/GUI/GUI_Factories.cpp:929 src/slic3r/GUI/Plater.cpp:6247
msgid "Convert from imperial units"
msgstr "Converteer naar Engelse eenheden"

#: src/slic3r/GUI/GUI_Factories.cpp:930 src/slic3r/GUI/Plater.cpp:6248
msgid "Revert conversion from imperial units"
msgstr "Conversie van Engelse eenheden ongedaan maken"

#: src/slic3r/GUI/GUI_Factories.cpp:931 src/slic3r/GUI/Plater.cpp:6249
msgid "Convert from meters"
msgstr "Converteer vanaf meters"

#: src/slic3r/GUI/GUI_Factories.cpp:932 src/slic3r/GUI/Plater.cpp:6249
msgid "Revert conversion from meters"
msgstr "Omrekenen van meters terugdraaien"

#: src/slic3r/GUI/GUI_Factories.cpp:953 src/slic3r/GUI/GUI_ObjectList.cpp:2296
#: src/libslic3r/PrintConfig.cpp:4784
msgid "Merge"
msgstr "Samenvoegen"

#: src/slic3r/GUI/GUI_Factories.cpp:953
msgid "Merge objects to the one multipart object"
msgstr "Voeg objecten samen tot één meerdelig object"

#: src/slic3r/GUI/GUI_Factories.cpp:972
msgid "Along X axis"
msgstr "Over de X-as"

#: src/slic3r/GUI/GUI_Factories.cpp:972
msgid "Mirror the selected object along the X axis"
msgstr "Spiegel het geselecteerde object over de X-as"

#: src/slic3r/GUI/GUI_Factories.cpp:974
msgid "Along Y axis"
msgstr "Over de Y-as"

#: src/slic3r/GUI/GUI_Factories.cpp:974
msgid "Mirror the selected object along the Y axis"
msgstr "Spiegel het geselecteerde object over de Y-as"

#: src/slic3r/GUI/GUI_Factories.cpp:976
msgid "Along Z axis"
msgstr "Over de Z-as"

#: src/slic3r/GUI/GUI_Factories.cpp:976
msgid "Mirror the selected object along the Z axis"
msgstr "Spiegel het geselecteerde object over de Z-as"

#: src/slic3r/GUI/GUI_Factories.cpp:979
msgid "Mirror"
msgstr "Spiegelen"

#: src/slic3r/GUI/GUI_Factories.cpp:979
msgid "Mirror the selected object"
msgstr "Spiegel het geselecteerde object"

#: src/slic3r/GUI/GUI_Factories.cpp:985
msgid "Edit text"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1007
msgid "Ability to change text, font, size, ..."
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1030 src/slic3r/GUI/GUI_ObjectList.cpp:1799
msgid "Add Shape"
msgstr "Voeg vorm toe"

#: src/slic3r/GUI/GUI_Factories.cpp:1068
msgid "To objects"
msgstr "Aan objecten"

#: src/slic3r/GUI/GUI_Factories.cpp:1068
msgid "Split the selected object into individual objects"
msgstr "Verdeel het geselecteerde object in individuele objecten"

#: src/slic3r/GUI/GUI_Factories.cpp:1071
msgid "To parts"
msgstr "Aan onderdelen"

#: src/slic3r/GUI/GUI_Factories.cpp:1071 src/slic3r/GUI/GUI_Factories.cpp:1106
msgid "Split the selected object into individual parts"
msgstr "Splits de geselecteerde objecten in individuele onderdelen"

#: src/slic3r/GUI/GUI_Factories.cpp:1075 src/slic3r/GUI/GUI_Factories.cpp:1106
#: src/libslic3r/PrintConfig.cpp:4813
msgid "Split"
msgstr "Splits"

#: src/slic3r/GUI/GUI_Factories.cpp:1075
msgid "Split the selected object"
msgstr "Verdeel het geselecteerde object"

#: src/slic3r/GUI/GUI_Factories.cpp:1234 src/slic3r/GUI/GUI_Factories.cpp:1252
msgid "Set number of instances"
msgstr "Stel aantal instanties in"

#: src/slic3r/GUI/GUI_Factories.cpp:1234
msgid "Change the number of instances of the selected objects"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1246
msgid "Add one more instance of the selected object"
msgstr "Voeg een instantie van het geselecteerde object toe"

#: src/slic3r/GUI/GUI_Factories.cpp:1249
msgid "Remove one instance of the selected object"
msgstr "Verwijder een instantie van het geselecteerde object"

#: src/slic3r/GUI/GUI_Factories.cpp:1252
msgid "Change the number of instances of the selected object"
msgstr "Wijzig het aantal instanties van het geselecteerde object"

#: src/slic3r/GUI/GUI_Factories.cpp:1256
msgid "Fill bed with instances"
msgstr "Vul het bed met instanties"

#: src/slic3r/GUI/GUI_Factories.cpp:1256
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""
"Vul het overige deel van het bed met instanties van het geselecteerde object"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr "Start op hoogte"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr "Stop op hoogte"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
msgid "Remove layer range"
msgstr "Verwijder laagbereik"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Add layer range"
msgstr "Voeg laagbereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:334
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:142
msgid "Name"
msgstr "Naam"

#: src/slic3r/GUI/GUI_ObjectList.cpp:353 src/slic3r/GUI/GUI_ObjectList.cpp:524
msgid "Editing"
msgstr "Bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:434
msgid "Invalid object part index"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:444
msgid "No errors detected"
msgstr "Geen fouten gevonden"

#: src/slic3r/GUI/GUI_ObjectList.cpp:453
#, c-format, boost-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] "%1$d fout automatisch hersteld"
msgstr[1] "%1$d fouten automatisch hersteld"

#: src/slic3r/GUI/GUI_ObjectList.cpp:459
#, c-format, boost-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] "%1$d degenereer facet"
msgstr[1] "%1$d degenereer facetten"

#: src/slic3r/GUI/GUI_ObjectList.cpp:461
#, c-format, boost-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] "%1$d lijn gerepareerd"
msgstr[1] "%1$d lijnen gerepareerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:463
#, c-format, boost-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] "%1$d facet verwijderd"
msgstr[1] "%1$d facetten verwijderd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:465
#, c-format, boost-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] "%1$d facet omgekeerd"
msgstr[1] "%1$d facetten omgekeerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:467
#, c-format, boost-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] "%1$d lijn achterstevoren"
msgstr[1] "%1$d lijnen achterstevoren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:470 src/slic3r/GUI/GUI_ObjectList.cpp:473
#, c-format, boost-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] "%1$d open lijn"
msgstr[1] "%1$d open lijnen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:472
msgid "Remaining errors"
msgstr "Resterende fouten"

#: src/slic3r/GUI/GUI_ObjectList.cpp:480
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""
"Rechtermuisklik op het pictogram om het .STL-bestand met NetFabb te repareren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:526
msgid "Right button click the icon to change the object settings"
msgstr "Rechtermuisklik op het icoontje om de objectinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:528
msgid "Click the icon to change the object settings"
msgstr "Klik op het pictogram om de objectinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:532
msgid "Right button click the icon to change the object printable property"
msgstr "Rechtermuisklik op het pictogram om de printinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:534
msgid "Click the icon to change the object printable property"
msgstr "Klik op het pictogram om de printinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:660
msgid "Change Extruder"
msgstr "Wijzig extruder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:680
msgid "Rename Object"
msgstr "Hernoem object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:680
msgid "Rename Sub-object"
msgstr "Hernoem subobject"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1333
#: src/slic3r/GUI/GUI_ObjectList.cpp:4605
msgid "Instances to Separated Objects"
msgstr "Zet instanties om in objecten"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
msgid "Volumes in Object reordered"
msgstr "Volumes in object opnieuw geordend"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
msgid "Object reordered"
msgstr "Object opnieuw geordend"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1389
msgid "Add Settings for Layers"
msgstr "Voeg laaginstellingen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1390
msgid "Add Settings for Sub-object"
msgstr "Voeg instellingen voor subobject toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1391
msgid "Add Settings for Object"
msgstr "Voeg instellingen voor object toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Add Settings Bundle for Height range"
msgstr "Voeg instellingen voor hoogtebereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1431
msgid "Add Settings Bundle for Sub-object"
msgstr "Voeg instellingen voor subobject toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1432
msgid "Add Settings Bundle for Object"
msgstr "Voeg instellingen voor een object toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
msgid "Load Part"
msgstr "Laad onderdeel"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
msgid "Load Modifier"
msgstr "Laad bewerker"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1639 src/slic3r/GUI/Plater.cpp:2485
msgid "Loading file"
msgstr "Bestand laden"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1647
msgid "Error!"
msgstr "Fout!"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1737
msgid "Add Generic Subobject"
msgstr "Voeg algemene subobjecten toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1767
msgid "Generic"
msgstr "Algemeen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1832
msgid "Add Shape from Gallery"
msgstr "Voeg vorm uit galerij toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1832
msgid "Add Shapes from Gallery"
msgstr "Voeg vormen uit galerij toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1952
msgid "Remove paint-on supports"
msgstr "Verwijder inkleur-supports"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1959
msgid "Remove paint-on seam"
msgstr "Verwijder inkleur-naad"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1973
msgid "Remove Multi Material painting"
msgstr "Verwijder multi-materiaal inkleuring"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1979
msgid "Shift objects to bed"
msgstr "Verplaats objecten naar bed"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1985
msgid "Remove variable layer height"
msgstr "Verwijder variabele laagdikte"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2006
msgid "Delete Settings"
msgstr "Verwijder instellingen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2030
msgid "Delete All Instances from Object"
msgstr "Verwijder alle instanties van het object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2046
msgid "Delete Height Range"
msgstr "Verwijder hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2064
msgid "Delete connector from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2065
msgid "Delete solid part from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2066
msgid "Delete negative volume from object which is a part of cut"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2068
msgid ""
"To save cut information you can delete all connectors from all related "
"objects."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2071
msgid ""
"This action will break a cut information.\n"
"After that PrusaSlicer can't guarantee model consistency."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2073
msgid ""
"To manipulate with solid parts or negative volumes you have to invalidate "
"cut information first."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2078
#: src/slic3r/GUI/GUI_ObjectList.cpp:2618
msgid "Delete all connectors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2109
msgid "From Object List You can't delete the last solid part from object."
msgstr "Het laatste onderdeel van de objectenlijst kan niet verwijderd worden."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2118
msgid "Delete Subobject"
msgstr "Verwijder subobject"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2144
msgid "Last instance of an object cannot be deleted."
msgstr "Laatste instantie van een object kan niet verwijderd worden."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2148
msgid "Instance cannot be deleted from cut object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2152
msgid "Delete Instance"
msgstr "Verwijder instantie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2176
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""
"Het geselecteerde object kan niet opgedeeld worden omdat het maar één "
"geometrie bevat."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2180
msgid "Split to Parts"
msgstr "Splits naar onderdelen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2183 src/slic3r/GUI/Plater.cpp:3140
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"splitting the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2303
msgid "Merged"
msgstr "Samengevoegd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2398
msgid "Merge all parts to the one single object"
msgstr "Voeg alle delen samen tot een enkel object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2430
msgid "Add Layers"
msgstr "Voeg lagen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2703
msgid "Cut Connectors information"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2713
#: src/slic3r/GUI/GUI_ObjectList.cpp:2778
msgid "Object manipulation"
msgstr "Object bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2723
msgid "Group manipulation"
msgstr "Groep bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2814
msgid "Object Settings to modify"
msgstr "Objectinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2818
msgid "Part Settings to modify"
msgstr "Onderdeelinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2823
msgid "Layer range Settings to modify"
msgstr "Laagbereikinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2829
msgid "Part manipulation"
msgstr "Onderdeel bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2837
msgid "Instance manipulation"
msgstr "Instantie bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2845
msgid "Height ranges"
msgstr "Hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2845
msgid "Settings for height range"
msgstr "Instellingen voor hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3381
msgid "Delete Selected"
msgstr "Verwijder selectie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3459
#: src/slic3r/GUI/GUI_ObjectList.cpp:3487
#: src/slic3r/GUI/GUI_ObjectList.cpp:3507
msgid "Add Height Range"
msgstr "Voeg hoogtebereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3553
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""
"Kan geen laagbereik toevoegen na het huidige laagbereik.\n"
"Het volgende laagbereik is te dun om in tweeën te splitsen\n"
"zonder over de minimale laagdikte heen te gaan."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3557
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""
"Kan geen laagbereik toevoegen tussen het huidige en het volgende "
"laagbereik.\n"
"Het gat tussen het huidige en volgende laagbereik is kleiner dan\n"
"de minimum toegestane laagdikte."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3562
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""
"Kan geen nieuw laagbereik toevoegen na het huidige laagbereik.\n"
"Het huidige laagbereik overlapt met het volgende laagbereik."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3621
msgid "Edit Height Range"
msgstr "Bewerk hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4003
msgid "Selection-Remove from list"
msgstr "Selectie - Verwijder van lijst"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4015
msgid "Selection-Add from list"
msgstr "Selectie - Voeg toe aan lijst"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4154
msgid "Object or Instance"
msgstr "Object of instantie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4155
msgid "Layer"
msgstr "Laag"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4157
msgid "Unsupported selection"
msgstr "Niet-ondersteunde selectie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4158
#, c-format, boost-format
msgid "You started your selection with %s Item."
msgstr "De selectie is gestart met item %s."

#: src/slic3r/GUI/GUI_ObjectList.cpp:4159
#, c-format, boost-format
msgid "In this mode you can select only other %s Items%s"
msgstr "In deze modus kunt u alleen andere %s items %s selecteren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4162
msgid "of a current Object"
msgstr "van het huidige object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4167
#: src/slic3r/GUI/GUI_ObjectList.cpp:4242 src/slic3r/GUI/Plater.cpp:199
msgid "Info"
msgstr "Info"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4347
msgid "Negative Volume"
msgstr "Negatief volume"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4359
msgid "Support Blocker"
msgstr "Supportblokkering"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4359
msgid "Support Enforcer"
msgstr "Supportforcering"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4369
msgid "Select type of part"
msgstr "Selecteer onderdeeltype"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4375
msgid "Change Part Type"
msgstr "Wijzig onderdeeltype"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4635
msgid "Enter new name"
msgstr "Voer nieuwe naam in"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4635
msgid "Renaming"
msgstr "Hernoemen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4697
msgid "Repairing model"
msgstr "Model repareren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4707
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"repairing the mesh."
msgstr ""
"Aangepaste supports, naden en multi-material schilderingen zijn verwijderd "
"bij het repareren van de mesh."

#: src/slic3r/GUI/GUI_ObjectList.cpp:4727
msgid "Fix through NetFabb"
msgstr "Repareer met NetFabb"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4730
msgid "Fixing through NetFabb"
msgstr "Repareren met NetFabb"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4760
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] "Het volgende model is succesvol gerepareerd"
msgstr[1] "De volgende modellen zijn succesvol gerepareerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4766
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] "Volgende model repareren mislukt"
msgstr[1] "Volgende modellen repareren mislukt"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4771
msgid "Repairing was canceled"
msgstr "Repareren is stopgezet"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4888
msgid "Change Extruders"
msgstr "Wijzig extruders"

#: src/slic3r/GUI/GUI_ObjectList.cpp:5014
msgid "Set Printable group"
msgstr "Stel printbare groep in"

#: src/slic3r/GUI/GUI_ObjectList.cpp:5014
msgid "Set Unprintable group"
msgstr "Stel onprintbare groep in"

#: src/slic3r/GUI/GUI_ObjectList.cpp:5016
msgid "Set Printable"
msgstr "Stel in op printbaar"

#: src/slic3r/GUI/GUI_ObjectList.cpp:5016
msgid "Set Unprintable"
msgstr "Stel in op niet-printbaar"

#: src/slic3r/GUI/GUI_ObjectList.cpp:5017
msgid "Set Printable Instance"
msgstr "Stel printbare instanties in"

#: src/slic3r/GUI/GUI_ObjectList.cpp:5017
msgid "Set Unprintable Instance"
msgstr "Stel instantie in op niet-printbaar"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
msgid "Select coordinate space, in which the transformation will be performed."
msgstr "Stel een coördinatenstelsel in. Hierin wordt de wijziging uitgevoerd."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:144 src/libslic3r/GCode.cpp:599
#: src/libslic3r/PrintObjectSlice.cpp:736
msgid "Object name"
msgstr "Objectnaam"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:606
msgid "Position"
msgstr "Positie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219
msgid "Size [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:251
#, boost-format
msgid "Mirror along %1% axis"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:272
msgid "Set Mirror"
msgstr "Stel spiegeling in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:313
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:331
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:347
msgid "Drop to bed"
msgstr "Plaats op het bed"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:361
msgid "Reset rotation"
msgstr "Reset rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:388
msgid "Reset Rotation"
msgstr "Reset rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:401
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:426
msgid "Reset scale"
msgstr "Reset verschaling"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:438
msgid "Skew [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:442
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:449
msgid "Reset skew"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:455
msgid "Inches"
msgstr "Inches"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:608
msgid "Scale factors"
msgstr "Verschalingsfactoren"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:619
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:624
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:652
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:660
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:668
msgid "Rotate (relative)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:623
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:659
msgid "Translate (relative) [World]"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:678
msgid "Translate"
msgstr "Verplaats"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797
msgid "Left handed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:852
msgid "World coordinates"
msgstr "Wereldcoördinaten"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:853
msgid "Object coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:854
msgid "Part coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:904
msgid "Set Position"
msgstr "Stel positie in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:937
msgid "Set Orientation"
msgstr "Stel oriëntatie in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1026
msgid "Set Scale"
msgstr "Stel verschaling in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1042
msgid "Set Size"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:64
msgid "Additional Settings"
msgstr "Extra instellingen"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:100
msgid "Remove parameter"
msgstr "Verwijder parameter"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:106
#, c-format, boost-format
msgid "Delete Option %s"
msgstr "Verwijder optie %s"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:155
#, c-format, boost-format
msgid "Change Option %s"
msgstr "Wijzig optie %s"

#: src/slic3r/GUI/GUI_Preview.cpp:582
msgid "NOTE:"
msgstr "Let op:"

#: src/slic3r/GUI/GUI_Preview.cpp:583
#, boost-format
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr "Gesliced object \"%1%\" lijkt op een logo of bord"

#: src/slic3r/GUI/GUI_Preview.cpp:584
msgid "Apply color change automatically"
msgstr "Pas kleurverandering automatisch toe"

#: src/slic3r/GUI/HintNotification.cpp:773
#: src/slic3r/GUI/HintNotification.cpp:799
#: src/slic3r/GUI/NotificationManager.cpp:457
#: src/slic3r/GUI/NotificationManager.cpp:474
msgid "More"
msgstr "Meer"

#: src/slic3r/GUI/HintNotification.cpp:914
msgid "Open Preferences."
msgstr "Open voorkeuren."

#: src/slic3r/GUI/HintNotification.cpp:1006
msgid "Open Documentation in web browser."
msgstr "Open documentatie in de webbrowser."

#: src/slic3r/GUI/ImGuiWrapper.cpp:680
msgid "Edit"
msgstr "Bewerk"

#: src/slic3r/GUI/ImGuiWrapper.cpp:1186 src/slic3r/GUI/Search.cpp:531
msgid "Use for search"
msgstr "Gebruik om te zoeken"

#: src/slic3r/GUI/ImGuiWrapper.cpp:1187 src/slic3r/GUI/Search.cpp:524
msgid "Category"
msgstr "Categorie"

#: src/slic3r/GUI/ImGuiWrapper.cpp:1189 src/slic3r/GUI/Search.cpp:526
msgid "Search in English"
msgstr "Zoek in het Engels"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:268
msgid "Arranging"
msgstr "Schikken"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:306
msgid "Arranging canceled."
msgstr "Schikken geannuleerd."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:307
msgid "Arranging done."
msgstr "Schikken voltooid."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:327
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "Kan modellen niet schikken. Sommige vormen kunnen ongeldig zijn."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:367
#, c-format, boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""
"De opstelling negeerde de volgende objecten die niet passen op één bed:\n"
"%s"

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:130
msgid "Filling bed"
msgstr "Vul bed"

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:161
msgid "Bed filling canceled."
msgstr "Bed vullen geannuleerd."

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:162
msgid "Bed filling done."
msgstr "Bed vullen klaar."

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:208
msgid "Add Emboss text object"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:579
#, boost-format
msgid "Text: %1%"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:628
msgid "Add Emboss text Volume"
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:733
msgid "Font doesn't have any shape for given text."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:773
msgid "There is no volume in projection direction."
msgstr ""

#: src/slic3r/GUI/Jobs/EmbossJob.cpp:822
msgid "There is no valid surface for text projection."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:22
msgid "Best surface quality"
msgstr "Beste oppervlaktekwaliteit"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24
msgid "Optimize object rotation for best surface quality."
msgstr "Optimaliseer objectrotatie voor beste oppervlaktekwaliteit."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:25
msgid "Reduced overhang slopes"
msgstr "Gereduceerde overhanghellingen"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:27
msgid ""
"Optimize object rotation to have minimum amount of overhangs needing support "
"structures.\n"
"Note that this method will try to find the best surface of the object for "
"touching the print bed if no elevation is set."
msgstr ""
"Optimaliseer objectrotatie voor een minimale hoeveelheid overhangingen die "
"support nodig hebben.\n"
"Let op dat deze methode zoekt naar het beste vlak van het object om op het "
"printbed te leggen als geen verhoging ingesteld is."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31
msgid "Lowest Z height"
msgstr "Laagste Z-hoogte"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:33
msgid "Rotate the model to have the lowest z height for faster print time."
msgstr "Roteer het model voor een minimale hoogte voor snellere printtijd."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:53
msgid "Searching for optimal orientation"
msgstr "Zoeken naar optimale oriëntatie"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:83
msgid "Orientation search canceled."
msgstr "Oriëntatie zoeken geannuleerd."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:84
msgid "Orientation found."
msgstr "Oriëntatie gevonden."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
msgid "Importing SLA archive"
msgstr "Importeer SLA-archief"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:77
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""
"Het SLA-archief bevat geen presets. Activeer alstublieft eerste sommige SLA-"
"printerpresets voor het importeren van dat SLA-archief."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81
msgid "Import is unavailable for this archive format."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:86
msgid "Importing canceled."
msgstr "Importeren geannuleerd."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:87
msgid "Importing done."
msgstr "Succesvol geïmporteerd."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:108
msgid "The file does not exist."
msgstr "Het bestand bestaat niet."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr ""
"Het geïmporteerde SLA-archief bevat geen presets. De huidige SLA-presets "
"worden gebruikt als oplossing."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:148 src/slic3r/GUI/Plater.cpp:2526
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr "U kunt geen SLA-project laden met een meerdelig object op het bed"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:150 src/slic3r/GUI/Plater.cpp:2528
msgid "Attention!"
msgstr "Attentie!"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:166
msgid ""
"The profile in the imported archive is corrupted and will not be loaded."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:178
msgid ""
"No object could be retrieved from the archive. The slices might be corrupted "
"or missing."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1184
msgid "Keyboard Shortcuts"
msgstr "Sneltoetsen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
msgid "New project, clear plater"
msgstr "Start nieuw project, verwijder modellen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
msgid "Open project AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:88
msgid "Save project (3mf)"
msgstr ".3MF-project opslaan"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
msgid "Save project as (3mf)"
msgstr ".3MF-project opslaan als"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:90
msgid "(Re)slice"
msgstr "(Her)slice"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Import Config from ini/amf/3mf/gcode"
msgstr "Importeer configuratie van .INI-, .AMF-, .3MF- of .gcode-bestand"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""
"Laad configuratie van .INI-, .AMF-, .3MF- of .gcode-bestanden en voeg samen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:96 src/slic3r/GUI/Plater.cpp:951
#: src/slic3r/GUI/Plater.cpp:7239 src/libslic3r/PrintConfig.cpp:4670
msgid "Export G-code"
msgstr "Exporteer .gcode-bestand"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:97 src/slic3r/GUI/Plater.cpp:7240
msgid "Send G-code"
msgstr "Stuur G-code"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
msgid "Export config"
msgstr "Exporteer configuratie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99 src/slic3r/GUI/Plater.cpp:934
msgid "Export to SD card / Flash drive"
msgstr "Exporteer naar SD-kaart / USB-stick"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Eject SD card / Flash drive"
msgstr "SD-kaart/USB-stick uitwerpen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
msgid "Select all objects"
msgstr "Selecteer alle objecten"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Deselect all"
msgstr "Deselecteer alles"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
msgid "Delete selected"
msgstr "Deselecteer selectie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Paste from clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
msgid "Reload plater from disk"
msgstr "Herlaad modellen van schijf"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Select Plater Tab"
msgstr "Selecteer modelweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr "Selecteer printinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr "Selecteer filamentinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr "Selecteer printerinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr "Schakel over naar 3D-bewerkingsweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr "Schakel over naar sliceweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
#: src/slic3r/GUI/PrintHostDialogs.cpp:267
msgid "Print host upload queue"
msgstr "Printhost-uploadwachtrij"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124 src/slic3r/GUI/MainFrame.cpp:77
msgid "Open new instance"
msgstr "Open nieuw venster"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Camera view"
msgstr "Weergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Show/Hide object/instance labels"
msgstr "Toon/verberg objecten- of instantielabels"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Preferences.cpp:58
#: src/slic3r/GUI/Preferences.cpp:166 src/slic3r/GUI/Preferences.cpp:189
#: src/slic3r/GUI/Preferences.cpp:197
msgid "Preferences"
msgstr "Voorkeuren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Show keyboard shortcuts list"
msgstr "Toon lijst met sneltoetsen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
msgid "Commands"
msgstr "Commando's"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Add Instance of the selected object"
msgstr "Voeg instantie van het geselecteerde object toe"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Remove Instance of the selected object"
msgstr "Verwijder instanties van het geselecteerde object"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""
"Druk om meerdere objecten te selecteren\n"
"of beweeg meerdere objecten met de muis"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Press to activate selection rectangle"
msgstr "Druk om selectiebox te activeren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Press to activate deselection rectangle"
msgstr "Druk om deselectiebox te activeren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Arrow Up"
msgstr "Pijltje naar boven"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Move selection 10 mm in positive Y direction"
msgstr "Verplaats selectie +10 mm in Y-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Arrow Down"
msgstr "Pijltje naar beneden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Move selection 10 mm in negative Y direction"
msgstr "Verplaats selectie -10 mm in Y-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Arrow Left"
msgstr "Pijltje naar links"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Move selection 10 mm in negative X direction"
msgstr "Verplaats selectie -10 mm in X-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Arrow Right"
msgstr "Pijltje naar rechts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Move selection 10 mm in positive X direction"
msgstr "Verplaats selectie +10 mm in X-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Any arrow"
msgstr "Elke pijl"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Movement step set to 1 mm"
msgstr "Verplaatsingsstap instellen op 1 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Movement in camera space"
msgstr "Verplaatsing in cameraruimte"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Page Up"
msgstr "Page Up"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Rotate selection 45 degrees CCW"
msgstr "Roteer selectie 45° tegen de klok in"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Page Down"
msgstr "Page Down"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Rotate selection 45 degrees CW"
msgstr "Roteer selectie 45° met de klok mee"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Gizmo move"
msgstr "Verplaats"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Gizmo scale"
msgstr "Verschaal"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Gizmo rotate"
msgstr "Roteer"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Gizmo cut"
msgstr "Snijden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Gizmo Place face on bed"
msgstr "Plaats vlak op bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Gizmo SLA hollow"
msgstr "SLA uithollen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Gizmo SLA support points"
msgstr "SLA-supportpunten"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Gizmo FDM paint-on supports"
msgstr "FDM inkleur-supports"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Gizmo FDM paint-on seam"
msgstr "FDM inkleur-naad"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Gizmo Multi Material painting"
msgstr "Multi-materiaal schilderen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Gizmo Text emboss / engrave"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Unselect gizmo or clear selection"
msgstr "Deselecteer bewerker of selectie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
msgid "Change camera type (perspective, orthographic)"
msgstr "Wijzig weergavetype (perspectief of orthografisch)"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Zoom to Bed"
msgstr "Zoom in op bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""
"Zoom in op geselecteerde objecten\n"
"of alle objecten in de modelweergave als niets is geselecteerd"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Zoom in"
msgstr "Zoom in"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Zoom out"
msgstr "Zoom uit"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Switch between Editor/Preview"
msgstr "Schakel tussen model- en sliceweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Collapse/Expand the sidebar"
msgstr "Klap de zijbalk in/uit"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""
"Toon/verberg 3DConnexion-apparaten-instellingenvenster als dit is "
"ingeschakeld"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr "Toon/verberg het dialoogvenster van 3Dconnexion-apparaatinstellingen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Minimize application"
msgstr "Minimaliseer programma"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187 src/slic3r/GUI/MainFrame.cpp:329
#: src/slic3r/GUI/MainFrame.cpp:378 src/slic3r/GUI/MainFrame.cpp:490
#: src/slic3r/GUI/MainFrame.cpp:493 src/slic3r/GUI/MainFrame.cpp:515
#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Plater"
msgstr "Modelweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr "Alle bewerkingen: roteer - linkermuisknop, beweeg - rechtermuisknop"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
msgid "Gizmo move: Press to snap by 1mm"
msgstr "Bewerken: Druk om te snappen per 1mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
msgid "Gizmo scale: Press to snap by 5%"
msgstr "Verschalen: Druk om te snappen per 5%"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr "Verschalen: Verschaal selectie tot het past in het printvolume"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr "Verschalen: Druk om in een enkele richting te verschalen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""
"Verschalen: Druk om geselecteerde modellen rond hun eigen middelpunt te "
"verschalen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""
"Roteren: Druk om geselecteerde modellen rond hun eigen middelpunt te draaien"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Gizmos"
msgstr "Bewerkers"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""
"De volgende sneltoetsen zijn van toepassing als de gespecificeerde bewerking "
"actief is"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Set selected items as Printable/Unprintable"
msgstr "Stel de geselecteerde items in als printbaar/onprintbaar"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
msgid "Set default extruder for the selected items"
msgstr "Stel de standaardextruder in voor de geselecteerde items"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
msgid "Set extruder number for the selected items"
msgstr "Stel het extrudernummer in voor de geselecteerde items"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
msgid "Objects List"
msgstr "Objectenlijst"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1612
msgid "Open a G-code file"
msgstr "Open een G-code-bestand"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1443
#: src/slic3r/GUI/MainFrame.cpp:1447 src/slic3r/GUI/MainFrame.cpp:1617
#: src/slic3r/GUI/MainFrame.cpp:1621
msgid "Reload the plater from disk"
msgstr "Herlaad modellen van schijf"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Vertical slider - Move active thumb Up"
msgstr "Verticale schuif - verplaats actieve markering naar boven"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
msgid "Vertical slider - Move active thumb Down"
msgstr "Verticale schuif - verplaats actieve markering naar beneden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
msgid "Horizontal slider - Move active thumb Left"
msgstr "Horizontale schuif - verplaats actieve markering naar links"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
msgid "Horizontal slider - Move active thumb Right"
msgstr "Horizontale schuif - verplaats actieve markering naar rechts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
msgid "On/Off one layer mode of the vertical slider"
msgstr "Zet eenlaagsmodus aan/uit van de verticale schuif"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
msgid "Show/Hide legend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Show/Hide G-code window"
msgstr "Toon/verberg G-code venster"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236 src/slic3r/GUI/Plater.cpp:4577
#: src/slic3r/GUI/Tab.cpp:2925
msgid "Preview"
msgstr "Sliceweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
msgid "Move active thumb Up"
msgstr "Verplaats actieve markering omhoog"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
msgid "Move active thumb Down"
msgstr "Verplaats actieve markering omlaag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
msgid "Set upper thumb as active"
msgstr "Activeer bovenste markering"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
msgid "Set lower thumb as active"
msgstr "Activeer onderste markering"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Add color change marker for current layer"
msgstr "Kleurwisselmarkering voor de huidige laag toevoegen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
msgid "Delete color change marker for current layer"
msgstr "Verwijder kleurwisselmarkering voor de huidige laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
#: src/slic3r/GUI/KBShortcutsDialog.cpp:257
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""
"Druk om 5x zo snel te gaan bij het verplaatsen van de markering\n"
"met pijltjestoetsen of het scrollwieltje"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Vertical Slider"
msgstr "Verticale schuif"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""
"De volgende sneltoetsen zijn van toepassing in de sliceweergave als de "
"verticale schuif actief is"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
msgid "Move active thumb Left"
msgstr "Verplaats actieve markering naar links"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Move active thumb Right"
msgstr "Verplaats actieve markering naar rechts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Set left thumb as active"
msgstr "Activeer linker markering"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
msgid "Set right thumb as active"
msgstr "Activeer rechter markering"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid "Horizontal Slider"
msgstr "Horizontale schuif"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""
"De volgende sneltoetsen zijn van toepassing in de sliceweergave als de "
"horizontale schuif actief is"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:284
msgid "Keyboard shortcuts"
msgstr "Sneltoetsen"

#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:91
#: src/slic3r/GUI/MainFrame.cpp:1503
msgid "Open a new PrusaSlicer instance"
msgstr "Open een PrusaSlicer venster"

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:93
msgid "G-code preview"
msgstr "Sliceweergave"

#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1388
msgid "Open G-code viewer"
msgstr "Open de G-code weergave"

#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1628
msgid "Open PrusaSlicer"
msgstr "Open PrusaSlicer"

#: src/slic3r/GUI/MainFrame.cpp:93
msgid "Open new G-code viewer"
msgstr "Open G-code weergave"

#: src/slic3r/GUI/MainFrame.cpp:227
msgid "Closing PrusaSlicer. Current project is modified."
msgstr "PrusaSlicer wordt afgesloten. Het huidig project is gewijzigd."

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "PrusaSlicer is closing"
msgstr "PrusaSlicer sluit nu"

#: src/slic3r/GUI/MainFrame.cpp:234
msgid "Closing PrusaSlicer while some presets are modified."
msgstr "PrusaSlicer sluit terwijl sommige presets aangepast zijn."

#: src/slic3r/GUI/MainFrame.cpp:330 src/slic3r/GUI/MainFrame.cpp:380
#: src/slic3r/GUI/Tab.hpp:418 src/slic3r/GUI/Tab.hpp:558
msgid "Print Settings"
msgstr "Printinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:384
#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
#: src/slic3r/GUI/Tab.hpp:539
msgid "Material Settings"
msgstr "Materiaalinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:382
#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
#: src/slic3r/GUI/Tab.hpp:455
msgid "Filament Settings"
msgstr "Filamentinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:332 src/slic3r/GUI/MainFrame.cpp:386
#: src/slic3r/GUI/Tab.hpp:507
msgid "Printer Settings"
msgstr "Printerinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:685 src/slic3r/GUI/Plater.cpp:1722
#: src/slic3r/GUI/Plater.cpp:2873
msgid "Untitled"
msgstr "Zonder titel"

#: src/slic3r/GUI/MainFrame.cpp:710
msgid "based on Slic3r"
msgstr "gebaseerd op Slic3r"

#: src/slic3r/GUI/MainFrame.cpp:1150
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D-stuurprogramma"

#: src/slic3r/GUI/MainFrame.cpp:1150
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "Open de Prusa3D drivers-downloadpagina in uw browser"

#: src/slic3r/GUI/MainFrame.cpp:1152
msgid "Software &Releases"
msgstr "Laatste versie downloaden"

#: src/slic3r/GUI/MainFrame.cpp:1152
msgid "Open the software releases page in your browser"
msgstr "Download de laatste softwareversie vanuit uw browser"

#: src/slic3r/GUI/MainFrame.cpp:1158
#, c-format, boost-format
msgid "%s &Website"
msgstr "%s-website"

#: src/slic3r/GUI/MainFrame.cpp:1159
#, c-format, boost-format
msgid "Open the %s website in your browser"
msgstr "Open de %s website in uw browser"

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "System &Info"
msgstr "Systeeminfo"

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "Show system information"
msgstr "Toon systeeminformatie"

#: src/slic3r/GUI/MainFrame.cpp:1167
msgid "Show &Configuration Folder"
msgstr "Toon configuratiemap"

#: src/slic3r/GUI/MainFrame.cpp:1167
msgid "Show user configuration folder (datadir)"
msgstr "Toon gebruikersconfiguratiemap (datadir)"

#: src/slic3r/GUI/MainFrame.cpp:1169
msgid "Report an I&ssue"
msgstr "Rapporteer een fout"

#: src/slic3r/GUI/MainFrame.cpp:1169
#, c-format, boost-format
msgid "Report an issue on %s"
msgstr "Rapporteer een fout op %s"

#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
#, c-format, boost-format
msgid "&About %s"
msgstr "Over %s"

#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
msgid "Show about dialog"
msgstr "Toon Over-dialoogvenster"

#: src/slic3r/GUI/MainFrame.cpp:1177
msgid "Show Tip of the Day"
msgstr "Toon tip van de dag"

#: src/slic3r/GUI/MainFrame.cpp:1181
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr ""
"Opent tip van de dag melding in de rechteronderhoek, of toont een andere tip "
"als die al open staat."

#: src/slic3r/GUI/MainFrame.cpp:1184
msgid "Show the list of the keyboard shortcuts"
msgstr "Toon de lijst met sneltoetsen"

#: src/slic3r/GUI/MainFrame.cpp:1198
msgid "Iso"
msgstr "Isometrisch"

#: src/slic3r/GUI/MainFrame.cpp:1198
msgid "Iso View"
msgstr "Isometrisch aanzicht"

#. TRN Main menu: View->Top
#: src/slic3r/GUI/MainFrame.cpp:1202
msgid "Top"
msgstr "Bovenkant"

#: src/slic3r/GUI/MainFrame.cpp:1202
msgid "Top View"
msgstr "Bovenaanzicht"

#. TRN Main menu: View->Bottom
#: src/slic3r/GUI/MainFrame.cpp:1205
msgid "Bottom"
msgstr "Onderkant"

#: src/slic3r/GUI/MainFrame.cpp:1205
msgid "Bottom View"
msgstr "Onderaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Front"
msgstr "Voorkant"

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Front View"
msgstr "Vooraanzicht"

#: src/slic3r/GUI/MainFrame.cpp:1209 src/libslic3r/PrintConfig.cpp:2308
msgid "Rear"
msgstr "Achterzijde"

#: src/slic3r/GUI/MainFrame.cpp:1209
msgid "Rear View"
msgstr "Achteraanzicht"

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Left"
msgstr "Links"

#: src/slic3r/GUI/MainFrame.cpp:1211
msgid "Left View"
msgstr "Linkerzijaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:1213
msgid "Right"
msgstr "Rechts"

#: src/slic3r/GUI/MainFrame.cpp:1213
msgid "Right View"
msgstr "Rechterzijaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "&New Project"
msgstr "Nieuw project"

#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "Start a new project"
msgstr "Start nieuw project"

#: src/slic3r/GUI/MainFrame.cpp:1229
msgid "&Open Project"
msgstr "Open project"

#: src/slic3r/GUI/MainFrame.cpp:1229
msgid "Open a project file"
msgstr "Open een projectbestand"

#: src/slic3r/GUI/MainFrame.cpp:1234
msgid "Recent projects"
msgstr "Huidige projecten"

#: src/slic3r/GUI/MainFrame.cpp:1246
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""
"Het geselecteerde project is niet langer beschikbaar.\n"
"Wilt u het verwijderen uit de lijst met recente projecten?"

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "&Save Project"
msgstr "Project opslaan"

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "Save current project file"
msgstr "Projectbestand opslaan"

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save Project &as"
msgstr "Project opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
msgid "Save current project file as"
msgstr "Projectbestand opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Import STL/3MF/STEP/OBJ/AM&F"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1284
msgid "Load a model"
msgstr "Laad een model"

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Import STL (Imperial Units)"
msgstr "Importeer STL (Engelse eenheden)"

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Load an model saved with imperial units"
msgstr "Laad een model dat is opgeslagen met Engelse eenheden"

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Import SLA Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1292
msgid "Load an SLA archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1296
msgid "Import ZIP Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1296
msgid "Load a ZIP archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1301
msgid "Import &Config"
msgstr "Importeer configuratiebestand"

#: src/slic3r/GUI/MainFrame.cpp:1301
msgid "Load exported configuration file"
msgstr "Laad geëxporteerd configuratiebestand"

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Import Config from &Project"
msgstr "Importeer configuratie van project"

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "Load configuration from project file"
msgstr "Laad configuratie van projectbestand"

#: src/slic3r/GUI/MainFrame.cpp:1308
msgid "Import Config &Bundle"
msgstr "Importeer configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:1308
msgid "Load presets from a bundle"
msgstr "Laad presets van een bundel"

#: src/slic3r/GUI/MainFrame.cpp:1311
msgid "&Import"
msgstr "Importeer"

#: src/slic3r/GUI/MainFrame.cpp:1314 src/slic3r/GUI/MainFrame.cpp:1677
msgid "Export &G-code"
msgstr "Exporteer G-code"

#: src/slic3r/GUI/MainFrame.cpp:1314
msgid "Export current plate as G-code"
msgstr "Exporteer modellen als .gcode-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1318 src/slic3r/GUI/MainFrame.cpp:1678
msgid "S&end G-code"
msgstr "Stuur G-code"

#: src/slic3r/GUI/MainFrame.cpp:1318
msgid "Send to print current plate as G-code"
msgstr "Stuur huidige weergave als G-code"

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export G-code to SD Card / Flash Drive"
msgstr "Exporteer G-code naar SD-kaart / USB-stick"

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr "Exporteer modellen als G-code naar SD-kaart/USB-stick"

#: src/slic3r/GUI/MainFrame.cpp:1326
msgid "Export Plate as &STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1326
msgid "Export current plate as STL/OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1329
msgid "Export Plate as STL/OBJ &Including Supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1329
msgid "Export current plate as STL/OBJ including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
msgid "Export &Toolpaths as OBJ"
msgstr "Exporteer toolpaden als OBJ"

#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
msgid "Export toolpaths as OBJ"
msgstr "Exporteer toolpaden als .OBJ-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1341
msgid "Export &Config"
msgstr "Exporteer configuratie"

#: src/slic3r/GUI/MainFrame.cpp:1341
msgid "Export current configuration to file"
msgstr "Exporteer huidige configuratie naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:1344
msgid "Export Config &Bundle"
msgstr "Exporteer configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:1344
msgid "Export all presets to file"
msgstr "Exporteer alle presets naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:1347
msgid "Export Config Bundle With Physical Printers"
msgstr "Exporteer configuratiebundel met fysieke printers"

#: src/slic3r/GUI/MainFrame.cpp:1347
msgid "Export all presets including physical printers to file"
msgstr "Exporteer alle presets, inclusief fysieke printers naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:1350
msgid "&Export"
msgstr "Exporteer"

#: src/slic3r/GUI/MainFrame.cpp:1352
msgid "Ejec&t SD Card / Flash Drive"
msgstr "SD-kaart / USB-stick uitwerpen"

#: src/slic3r/GUI/MainFrame.cpp:1352
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr "SD-kaart/USB-stick uitwerpen nadat de G-code geëxporteerd is."

#: src/slic3r/GUI/MainFrame.cpp:1360
msgid "Quick Slice"
msgstr "Snel slicen"

#: src/slic3r/GUI/MainFrame.cpp:1360
msgid "Slice a file into a G-code"
msgstr "Slice naar een .gcode-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1366
msgid "Quick Slice and Save As"
msgstr "Snel slicen en opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1366
msgid "Slice a file into a G-code, save as"
msgstr "Slice naar .gcode-bestand, opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1372
msgid "Repeat Last Quick Slice"
msgstr "Herhaal laatste snelle slice"

#: src/slic3r/GUI/MainFrame.cpp:1372
msgid "Repeat last quick slice"
msgstr "Herhaal laatste snelle slice"

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "(Re)Slice No&w"
msgstr "(Her)slice nu"

#: src/slic3r/GUI/MainFrame.cpp:1380
msgid "Start new slicing process"
msgstr "Start nieuw sliceproces"

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "&Repair STL file"
msgstr "Repareer .STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "Automatically repair an STL file"
msgstr "Automatisch een .STL-bestand repareren"

#: src/slic3r/GUI/MainFrame.cpp:1388
msgid "&G-code Preview"
msgstr "Voorbeeldweergave"

#: src/slic3r/GUI/MainFrame.cpp:1392
msgid "E&xit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1392 src/slic3r/GUI/UpdateDialogs.cpp:376
#: src/slic3r/GUI/UpdateDialogs.cpp:423
#, c-format, boost-format
msgid "Exit %s"
msgstr "%s afsluiten"

#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
msgid "&Quit"
msgstr "Afsluiten"

#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
#, c-format, boost-format
msgid "Quit %s"
msgstr "%s afsluiten"

#: src/slic3r/GUI/MainFrame.cpp:1410
msgid "&Select All"
msgstr "Selecteer alles"

#: src/slic3r/GUI/MainFrame.cpp:1411
msgid "Selects all objects"
msgstr "Selecteer alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:1413
msgid "D&eselect All"
msgstr "Deselecteer alles"

#: src/slic3r/GUI/MainFrame.cpp:1414
msgid "Deselects all objects"
msgstr "Deselecteer alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:1417
msgid "&Delete Selected"
msgstr "Verwijder geselecteerde"

#: src/slic3r/GUI/MainFrame.cpp:1418
msgid "Deletes the current selection"
msgstr "Verwijdert huidige selectie"

#: src/slic3r/GUI/MainFrame.cpp:1420
msgid "Delete &All"
msgstr "Verwijder alles"

#: src/slic3r/GUI/MainFrame.cpp:1421
msgid "Deletes all objects"
msgstr "Verwijdert alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:1425
msgid "&Undo"
msgstr "Ongedaan maken"

#: src/slic3r/GUI/MainFrame.cpp:1428
msgid "&Redo"
msgstr "Opnieuw doen"

#: src/slic3r/GUI/MainFrame.cpp:1433
msgid "&Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/MainFrame.cpp:1434
msgid "Copy selection to clipboard"
msgstr "Kopieer selectie naar klembord"

#: src/slic3r/GUI/MainFrame.cpp:1436
msgid "&Paste"
msgstr "Plak"

#: src/slic3r/GUI/MainFrame.cpp:1437
msgid "Paste clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/MainFrame.cpp:1442 src/slic3r/GUI/MainFrame.cpp:1446
#: src/slic3r/GUI/MainFrame.cpp:1616 src/slic3r/GUI/MainFrame.cpp:1620
msgid "Re&load from Disk"
msgstr "Herlaad van schijf"

#: src/slic3r/GUI/MainFrame.cpp:1452
msgid "Searc&h"
msgstr "Zoek"

#: src/slic3r/GUI/MainFrame.cpp:1453
msgid "Search in settings"
msgstr "Zoek in instellingen"

#: src/slic3r/GUI/MainFrame.cpp:1461
msgid "&Plater Tab"
msgstr "Tabblad modelweergave"

#: src/slic3r/GUI/MainFrame.cpp:1461
msgid "Show the plater"
msgstr "Toon de modelweergave"

#: src/slic3r/GUI/MainFrame.cpp:1466
msgid "P&rint Settings Tab"
msgstr "Tabblad printinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1466
msgid "Show the print settings"
msgstr "Toon de printinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1469 src/slic3r/GUI/MainFrame.cpp:1680
msgid "&Filament Settings Tab"
msgstr "Tabblad filamentinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1469
msgid "Show the filament settings"
msgstr "Toon de filamentinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1473
msgid "Print&er Settings Tab"
msgstr "Tabblad printerinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1473
msgid "Show the printer settings"
msgstr "Toon de printerinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1479
msgid "3&D"
msgstr "3D-bewerkingsweergave"

#: src/slic3r/GUI/MainFrame.cpp:1479
msgid "Show the 3D editing view"
msgstr "Toon de modelweergave"

#: src/slic3r/GUI/MainFrame.cpp:1482
msgid "Pre&view"
msgstr "Sliceweergave"

#: src/slic3r/GUI/MainFrame.cpp:1482
msgid "Show the 3D slices preview"
msgstr "Toon de weergave van de slice"

#: src/slic3r/GUI/MainFrame.cpp:1488
msgid "Open the dialog to modify shape gallery"
msgstr "Open het venster voor bewerken van de vormengalerij"

#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Print &Host Upload Queue"
msgstr "Printhost-uploadwachtrij"

#: src/slic3r/GUI/MainFrame.cpp:1499
msgid "Display the Print Host Upload Queue window"
msgstr "Toon het venster van de printhost-uploadwachtrij"

#: src/slic3r/GUI/MainFrame.cpp:1503
msgid "Open New Instance"
msgstr "Open nieuwe instantie"

#: src/slic3r/GUI/MainFrame.cpp:1507
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1733
msgid "Compare Presets"
msgstr "Vergelijk presets"

#: src/slic3r/GUI/MainFrame.cpp:1507
msgid "Compare presets"
msgstr "Vergelijk presets"

#: src/slic3r/GUI/MainFrame.cpp:1517
msgid "Show &Labels"
msgstr "Toon labels"

#: src/slic3r/GUI/MainFrame.cpp:1517
msgid "Show object/instance labels in 3D scene"
msgstr "Toon object-/instantielabels in de modelweergave"

#: src/slic3r/GUI/MainFrame.cpp:1520 src/slic3r/GUI/MainFrame.cpp:1642
msgid "Show Legen&d"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1520
msgid "Show legend in preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1523
msgid "&Collapse Sidebar"
msgstr "Zijbalk inklappen"

#: src/slic3r/GUI/MainFrame.cpp:1523 src/slic3r/GUI/Plater.cpp:2336
msgid "Collapse sidebar"
msgstr "Zijbalk inklappen"

#: src/slic3r/GUI/MainFrame.cpp:1528
msgid "&Fullscreen"
msgstr "Volledig scherm"

#: src/slic3r/GUI/MainFrame.cpp:1528
msgid "Fullscreen"
msgstr "Volledig scherm"

#: src/slic3r/GUI/MainFrame.cpp:1544 src/slic3r/GUI/MainFrame.cpp:1651
msgid "&File"
msgstr "Bestand"

#: src/slic3r/GUI/MainFrame.cpp:1545
msgid "&Edit"
msgstr "Bewerken"

#: src/slic3r/GUI/MainFrame.cpp:1546
msgid "&Window"
msgstr "Venster"

#: src/slic3r/GUI/MainFrame.cpp:1547 src/slic3r/GUI/MainFrame.cpp:1652
msgid "&View"
msgstr "Toon"

#: src/slic3r/GUI/MainFrame.cpp:1550 src/slic3r/GUI/MainFrame.cpp:1655
msgid "&Help"
msgstr "Help"

#: src/slic3r/GUI/MainFrame.cpp:1612
msgid "&Open G-code"
msgstr "Open G-code"

#: src/slic3r/GUI/MainFrame.cpp:1628
msgid "Open &PrusaSlicer"
msgstr "Open PrusaSlicer"

#: src/slic3r/GUI/MainFrame.cpp:1642
msgid "Show legend"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1677
msgid "E&xport"
msgstr "Exporteer"

#: src/slic3r/GUI/MainFrame.cpp:1678
msgid "S&end to print"
msgstr "Stuur om te printen"

#: src/slic3r/GUI/MainFrame.cpp:1680
msgid "Mate&rial Settings Tab"
msgstr "Materiaalinstellingentab"

#: src/slic3r/GUI/MainFrame.cpp:1704
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Kies een .STL-, .OBJ-, .AMF-, .3MF- of .PRUSA-bestand om te slicen:"

#: src/slic3r/GUI/MainFrame.cpp:1716
msgid "No previously sliced file."
msgstr "Niet eerder gesliced bestand."

#: src/slic3r/GUI/MainFrame.cpp:1723
msgid "Previously sliced file ("
msgstr "Eerder gesliced bestand ("

#: src/slic3r/GUI/MainFrame.cpp:1723
msgid ") not found."
msgstr ") niet gevonden."

#: src/slic3r/GUI/MainFrame.cpp:1724
msgid "File Not Found"
msgstr "Bestand niet gevonden"

#: src/slic3r/GUI/MainFrame.cpp:1759
#, c-format, boost-format
msgid "Save %s file as:"
msgstr "%s-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1759
msgid "SVG"
msgstr "SVG"

#: src/slic3r/GUI/MainFrame.cpp:1759
msgid "G-code"
msgstr "G-code"

#: src/slic3r/GUI/MainFrame.cpp:1771
msgid "Save ZIP file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1780 src/slic3r/GUI/Plater.cpp:3382
#: src/slic3r/GUI/Plater.cpp:6714 src/slic3r/GUI/Tab.cpp:1640
#: src/slic3r/GUI/Tab.cpp:5189
msgid "Slicing"
msgstr "Slicen"

#. TRN ProgressDialog on reslicing: "input file basename"
#: src/slic3r/GUI/MainFrame.cpp:1782
#, c-format, boost-format
msgid "Processing %s"
msgstr "%s verwerken"

#: src/slic3r/GUI/MainFrame.cpp:1805
#, boost-format
msgid "%1% was successfully sliced."
msgstr "%1% is succesvol gesliced."

#: src/slic3r/GUI/MainFrame.cpp:1808
msgid "Slicing Done!"
msgstr "Slicen klaar!"

#: src/slic3r/GUI/MainFrame.cpp:1824
msgid "Select the STL file to repair:"
msgstr "Selecteer het .STL-bestand om te repareren:"

#: src/slic3r/GUI/MainFrame.cpp:1834
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ".OBJ-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1845
msgid "Your file was repaired."
msgstr "Het bestand is gerepareerd."

#: src/slic3r/GUI/MainFrame.cpp:1845 src/libslic3r/PrintConfig.cpp:4789
msgid "Repair"
msgstr "Repareer"

#: src/slic3r/GUI/MainFrame.cpp:1859
msgid "Save configuration as:"
msgstr "Configuratie opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1876
msgid "Loading of a configuration file"
msgstr "Laden van een configuratiebestand"

#: src/slic3r/GUI/MainFrame.cpp:1878 src/slic3r/GUI/MainFrame.cpp:1945
msgid "Select configuration to load:"
msgstr "Selecteer configuratie om te laden:"

#: src/slic3r/GUI/MainFrame.cpp:1909
msgid "Exporting configuration bundle"
msgstr "Exporteren van configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:1910
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr ""
"Sommige presets zijn aangepast en de niet-opgeslagen wijzigingen zullen niet "
"worden geëxporteerd in de configuratiebundel."

#: src/slic3r/GUI/MainFrame.cpp:1919
msgid "Save presets bundle as:"
msgstr "Presetbundel opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1942
msgid "Loading of a configuration bundle"
msgstr "Laden van een configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:1972
#, c-format, boost-format
msgid "%d presets successfully imported."
msgstr "%d presets succesvol geïmporteerd."

#: src/slic3r/GUI/Mouse3DController.cpp:453
msgid "3Dconnexion settings"
msgstr "3Dconnexion-instellingen"

#: src/slic3r/GUI/Mouse3DController.cpp:464
msgid "Device:"
msgstr "Apparaat:"

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Speed:"
msgstr "Snelheid:"

#: src/slic3r/GUI/Mouse3DController.cpp:472
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Translation"
msgstr "Verplaatsing"

#: src/slic3r/GUI/Mouse3DController.cpp:484
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Zoom"
msgstr "Zoom"

#: src/slic3r/GUI/Mouse3DController.cpp:490
msgid "Deadzone:"
msgstr "Deadzone:"

#: src/slic3r/GUI/Mouse3DController.cpp:505
msgid "Options:"
msgstr "Opties:"

#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Swap Y/Z axes"
msgstr "Wissel Y/Z-assen"

#: src/slic3r/GUI/MsgDialog.cpp:227
#, c-format, boost-format
msgid "%s error"
msgstr "%s fout"

#: src/slic3r/GUI/MsgDialog.cpp:228
#, c-format, boost-format
msgid "%s has encountered an error"
msgstr "%s heeft een fout opgelopen"

#: src/slic3r/GUI/MsgDialog.cpp:247
#, c-format, boost-format
msgid "%s warning"
msgstr "%s waarschuwing"

#: src/slic3r/GUI/MsgDialog.cpp:248
#, c-format, boost-format
msgid "%s has a warning"
msgstr "%s heeft een waarschuwing"

#: src/slic3r/GUI/MsgDialog.cpp:261 src/slic3r/GUI/MsgDialog.cpp:274
#, c-format, boost-format
msgid "%s info"
msgstr "%s info"

#: src/slic3r/GUI/MsgDialog.cpp:302
#, c-format, boost-format
msgid "%s information"
msgstr "%s informatie"

#: src/slic3r/GUI/NotificationManager.hpp:899
msgid "3D Mouse disconnected."
msgstr "3D-muis ontkoppeld."

#: src/slic3r/GUI/NotificationManager.hpp:900
msgid "Configuration update is available."
msgstr "Configuratie-update is beschikbaar."

#: src/slic3r/GUI/NotificationManager.hpp:900
msgid "See more."
msgstr "Zie meer."

#: src/slic3r/GUI/NotificationManager.hpp:908
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""
"U heeft een G-code toegevoegd voor kleurwisseling, maar de waarde is leeg.\n"
"Om de G-code juist te exporteren, moet u de kleurwissel-G-code in "
"printerinstellingen > custom G-code controleren."

#: src/slic3r/GUI/NotificationManager.hpp:911
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr ""
"Geen kleurwisseling toegevoegd aan de print. De print lijkt niet op een logo "
"of bord."

#: src/slic3r/GUI/NotificationManager.hpp:913
msgid "Desktop integration was successful."
msgstr "Desktopintegratie is succesvol."

#: src/slic3r/GUI/NotificationManager.hpp:915
msgid "Desktop integration failed."
msgstr "Desktopintegratie mislukt."

#: src/slic3r/GUI/NotificationManager.hpp:917
msgid "Undo desktop integration was successful."
msgstr "Desktopintegratie ongedaan maken is succesvol."

#: src/slic3r/GUI/NotificationManager.hpp:919
msgid "Undo desktop integration failed."
msgstr "Desktopintegratie ongedaan maken mislukt."

#: src/slic3r/GUI/NotificationManager.hpp:920
msgid "Exporting."
msgstr "Exporteren."

#: src/slic3r/GUI/NotificationManager.hpp:924
msgid ""
"PrusaSlicer recieved a download request from Printables.com, but it's not "
"allowed. You can allow it"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:925
msgid "here."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:773
msgid "Open Folder."
msgstr "Open map."

#: src/slic3r/GUI/NotificationManager.cpp:811
msgid "Eject drive"
msgstr "Schijf uitwerpen"

#: src/slic3r/GUI/NotificationManager.cpp:869
msgid "Ejecting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1054
#: src/slic3r/GUI/NotificationManager.cpp:1267
#: src/slic3r/GUI/NotificationManager.cpp:1472
msgid "ERROR"
msgstr "FOUT"

#: src/slic3r/GUI/NotificationManager.cpp:1269
#: src/slic3r/GUI/NotificationManager.cpp:1377
msgid "COMPLETED"
msgstr "VOLTOOID"

#: src/slic3r/GUI/NotificationManager.cpp:1467
msgid "RESOLVING ADDRESS"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1477
msgid "CANCELED"
msgstr "GEANNULEERD"

#: src/slic3r/GUI/NotificationManager.cpp:1539
msgid "Cancel upload"
msgstr "Annuleer upload"

#: src/slic3r/GUI/NotificationManager.cpp:1648
#, c-format, boost-format
msgid "%1$d object was loaded with custom supports."
msgid_plural "%1$d objects were loaded with custom supports."
msgstr[0] "%1$d object is geladen met custom supports."
msgstr[1] "%1$d objecten zijn geladen met custom supports."

#: src/slic3r/GUI/NotificationManager.cpp:1649
#, c-format, boost-format
msgid "%1$d object was loaded with custom seam."
msgid_plural "%1$d objects were loaded with custom seam."
msgstr[0] "%1$d object is geladen met een custom naad."
msgstr[1] "%1$d objecten zijn geladen met een custom naad."

#: src/slic3r/GUI/NotificationManager.cpp:1650
#, c-format, boost-format
msgid "%1$d object was loaded with multimaterial painting."
msgid_plural "%1$d objects were loaded with multimaterial painting."
msgstr[0] "%1$d object is geladen met multi-materiaal schilderingen."
msgstr[1] "%1$d objecten zijn geladen met multi-materiaal schilderingen."

#: src/slic3r/GUI/NotificationManager.cpp:1651
#, c-format, boost-format
msgid "%1$d object was loaded with variable layer height."
msgid_plural "%1$d objects were loaded with variable layer height."
msgstr[0] "%1$d object is geladen met variabele laagdikte."
msgstr[1] "%1$d objecten zijn geladen met variabele laagdikte."

#: src/slic3r/GUI/NotificationManager.cpp:1652
#, c-format, boost-format
msgid "%1$d object was loaded with partial sinking."
msgid_plural "%1$d objects were loaded with partial sinking."
msgstr[0] "%1$d object is geladen met gedeeltelijk verzakken."
msgstr[1] "%1$d objecten zijn geladen met gedeeltelijk verzakken."

#: src/slic3r/GUI/NotificationManager.cpp:1653
#, c-format, boost-format
msgid "%1$d object was loaded as a part of cut object."
msgid_plural "%1$d objects were loaded as parts of cut object"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Slicing finished."
msgstr "Slicen gelukt."

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export G-Code."
msgstr "Exporteer G-code."

#: src/slic3r/GUI/NotificationManager.cpp:1766
msgid "Export."
msgstr "Exporteer."

#: src/slic3r/GUI/NotificationManager.cpp:2101
#: src/slic3r/GUI/NotificationManager.cpp:2108
#: src/slic3r/GUI/NotificationManager.cpp:2124
#: src/slic3r/GUI/NotificationManager.cpp:2130
#: src/slic3r/GUI/NotificationManager.cpp:2201
msgid "ERROR:"
msgstr "Fout:"

#: src/slic3r/GUI/NotificationManager.cpp:2113
#: src/slic3r/GUI/NotificationManager.cpp:2140
#: src/slic3r/GUI/NotificationManager.cpp:2148
#: src/slic3r/GUI/NotificationManager.cpp:2159 src/slic3r/GUI/Plater.cpp:3229
msgid "WARNING:"
msgstr "Waarschuwing:"

#: src/slic3r/GUI/NotificationManager.cpp:2274
msgid "Exporting finished."
msgstr "Exporteren gelukt."

#: src/slic3r/GUI/NotificationManager.cpp:2449
#: src/slic3r/GUI/UpdateDialogs.cpp:193
msgid "Download"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:67
msgid "Paint-on seam"
msgstr "Naad schilderen"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:68
msgid "Cut connectors"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:70
msgid "Sinking"
msgstr "Verzakken"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:110
msgid "Instances"
msgstr "Instanties"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:114
#: src/slic3r/GUI/ObjectDataViewModel.cpp:275
#, c-format, boost-format
msgid "Instance %d"
msgstr "Instantie %d"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:121 src/slic3r/GUI/Tab.cpp:5009
#: src/slic3r/GUI/Tab.cpp:5146
msgid "Layers"
msgstr "Lagen"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
msgid "Range"
msgstr "Bereik"

#: src/slic3r/GUI/OpenGLManager.cpp:377
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL ES 2.0 capable graphics driver to run "
"correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:380
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL %s capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:383
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""
"PrusaSlicer vereist een grafische driver die OpenGL 2.0 kan draaien,\n"
"terwijl OpenGL-versie %s, render %s, leverancier %s is gedetecteerd."

#: src/slic3r/GUI/OpenGLManager.cpp:387
msgid "You may need to update your graphics card driver."
msgstr "U moet mogelijk uw grafische kaart updaten."

#: src/slic3r/GUI/OpenGLManager.cpp:390
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""
"Als tijdelijke oplossing kunt u PrusaSlicer draaien met software gerenderde "
"modelweergave door prusa-slicer.exe te draaien met de --sw-renderer "
"parameter."

#: src/slic3r/GUI/OpenGLManager.cpp:392
msgid "Unsupported OpenGL version"
msgstr "Niet-ondersteunde OpenGL-versie"

#: src/slic3r/GUI/OpenGLManager.cpp:399
#, c-format, boost-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""
"Kan de volgende sjablonen niet laden:\n"
"%s"

#: src/slic3r/GUI/OpenGLManager.cpp:400
msgid "Error loading shaders"
msgstr "Fout bij het laden van de sjablonen"

#: src/slic3r/GUI/OptionsGroup.cpp:126
msgid "Unavailable for this method."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
msgid "Delete this preset from this printer device"
msgstr "Verwijderen van deze preset van deze printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:84
msgid "This printer will be shown in the presets list as"
msgstr "De printer wordt getoond in de presets als"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
msgid "Type here the name of your printer device"
msgstr "Type hier de naam van je printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Descriptive name for the printer"
msgstr "Beschrijvende naam voor de printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
msgid "Add preset for this printer device"
msgstr "Voeg preset toe voor deze printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2345
msgid "Print Host upload"
msgstr "Printhost-upload"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271
msgid "Connection to printers connected via the print host failed."
msgstr "Verbinding met printers die via printhost verbonden zijn niet gelukt."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:313
msgid "Test"
msgstr "Test"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:318
msgid "Could not get a valid Printer Host reference"
msgstr "Kan geen geldige printerhost-referentie krijgen"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330
msgid "Success!"
msgstr "Gelukt!"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:340
msgid "Refresh Printers"
msgstr "Ververs printers"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS-CA-bestand is optioneel. Het is alleen nodig als u werkt met een zelf "
"ondertekend certificaat."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:377
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "Certificaatbestanden (*.crt, *.pem)|*.crt;*.pem|Alle betanden|*.*"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:378
msgid "Open CA certificate file"
msgstr "Open een CA-certificaatbestand"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:407
#: src/libslic3r/PrintConfig.cpp:340
msgid "HTTPS CA File"
msgstr "HTTPS-CA-bestand"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:408
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
"Op dit systeem gebruikt %s HTTPS-certificaten van de Certificate Store of "
"Keychain."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:409
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"Importeer een CA-bestand in de Certificate Store of Keychain om deze te "
"gebruiken."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:705
msgid "You have to enter a printer name."
msgstr "U moet een printernaam invoeren."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:713
#, boost-format
msgid "Printer with name \"%1%\" already exists."
msgstr "Printer met naam \"%1%\" bestaat al."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:714
msgid "Replace?"
msgstr "Vervangen?"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:741
#, boost-format
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""
"De volgende printerpreset is gedupliceerd:%1%De bovenste preset voor printer "
"\"%2%\" zal eenmalig worden gebruikt."
msgstr[1] ""
"De volgende printerpresets zijn gedupliceerd:%1%De bovenste preset voor "
"printer \"%2%\" zal eenmalig worden gebruikt."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:791
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""
"Het is niet mogelijk om de laatst gerelateerde preset voor de printer te "
"verwijderen."

#: src/slic3r/GUI/Plater.cpp:160
msgid "The provided name is not valid;"
msgstr "De gegeven naam is niet geldig;"

#: src/slic3r/GUI/Plater.cpp:161
msgid "the following characters are not allowed:"
msgstr "de volgende karakters zijn niet toegestaan:"

#: src/slic3r/GUI/Plater.cpp:225
msgid ""
"For a multipart object, this value isn't accurate.\n"
"It doesn't take account of intersections and negative volumes."
msgstr ""
"Voor een meerdelig object is deze waarde niet accuraat.\n"
"Intersecties en negatieve volumes worden niet meegenomen."

#: src/slic3r/GUI/Plater.cpp:229
msgid "Volume"
msgstr "Volume"

#: src/slic3r/GUI/Plater.cpp:231
msgid "Facets"
msgstr "Vlakken"

#: src/slic3r/GUI/Plater.cpp:288
msgid "Sliced Info"
msgstr "Slice-info"

#: src/slic3r/GUI/Plater.cpp:308 src/slic3r/GUI/Plater.cpp:1411
msgid "Used Filament (g)"
msgstr "Filamentverbruik (g)"

#: src/slic3r/GUI/Plater.cpp:309 src/slic3r/GUI/Plater.cpp:1392
msgid "Used Filament (m)"
msgstr "Filamentverbruik (m)"

#: src/slic3r/GUI/Plater.cpp:310 src/slic3r/GUI/Plater.cpp:1404
msgid "Used Filament (mm³)"
msgstr "Filamentverbruik (mm³)"

#: src/slic3r/GUI/Plater.cpp:311
msgid "Used Material (unit)"
msgstr "Materiaalverbruik (eenheid)"

#: src/slic3r/GUI/Plater.cpp:312
msgid "Cost (money)"
msgstr "Kosten (€)"

#: src/slic3r/GUI/Plater.cpp:313 src/slic3r/GUI/Plater.cpp:1374
#: src/slic3r/GUI/Plater.cpp:1376 src/slic3r/GUI/Plater.cpp:1459
#: src/slic3r/GUI/Plater.cpp:1464
msgid "Estimated printing time"
msgstr "Geschatte printtijd"

#: src/slic3r/GUI/Plater.cpp:314
msgid "Number of tool changes"
msgstr "Aantal toolwisselingen"

#: src/slic3r/GUI/Plater.cpp:439
msgid "Select what kind of support do you need"
msgstr "Selecteer welk type support nodig is"

#: src/slic3r/GUI/Plater.cpp:442 src/libslic3r/PrintConfig.cpp:2640
#: src/libslic3r/PrintConfig.cpp:3483
msgid "Support on build plate only"
msgstr "Support alleen op het bed"

#: src/slic3r/GUI/Plater.cpp:443
msgid "For support enforcers only"
msgstr "Alleen voor supportforceringen"

#: src/slic3r/GUI/Plater.cpp:444
msgid "Everywhere"
msgstr "Overal"

#: src/slic3r/GUI/Plater.cpp:477 src/slic3r/GUI/Tab.cpp:1496
msgid "Brim"
msgstr "Brim"

#: src/slic3r/GUI/Plater.cpp:479
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr "Door dit aan te vinken zal een brim rond elke object geprint worden."

#: src/slic3r/GUI/Plater.cpp:487
msgid "Purging volumes"
msgstr "Afveegvolume"

#: src/slic3r/GUI/Plater.cpp:594
msgid "Select what kind of pad do you need"
msgstr "Selecteer welk soort basisplaat nodig is"

#: src/slic3r/GUI/Plater.cpp:597
msgid "Below object"
msgstr "Onder het object"

#: src/slic3r/GUI/Plater.cpp:598
msgid "Around object"
msgstr "Rondom het object"

#: src/slic3r/GUI/Plater.cpp:932 src/slic3r/GUI/Plater.cpp:7240
msgid "Send to printer"
msgstr "Stuur naar printer"

#: src/slic3r/GUI/Plater.cpp:952 src/slic3r/GUI/Plater.cpp:3382
#: src/slic3r/GUI/Plater.cpp:6717
msgid "Slice now"
msgstr "Slice nu"

#: src/slic3r/GUI/Plater.cpp:1124
msgid "Hold Shift to Slice & Export G-code"
msgstr "Houdt shift ingedrukt om te slicen en de G-code te exporteren"

#: src/slic3r/GUI/Plater.cpp:1321
#, boost-format
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] "%1% (%2$d shell)"
msgstr[1] "%1% (%2$d shells)"

#: src/slic3r/GUI/Plater.cpp:1349
msgid "Used Material (ml)"
msgstr "Materiaalgebruik (ml)"

#: src/slic3r/GUI/Plater.cpp:1352
msgid "object"
msgid_plural "objects"
msgstr[0] "object"
msgstr[1] "objecten"

#: src/slic3r/GUI/Plater.cpp:1352
msgid "supports and pad"
msgstr "support en basisplaat"

#: src/slic3r/GUI/Plater.cpp:1392
msgid "Used Filament (in)"
msgstr "Gebruikt filament (in)"

#: src/slic3r/GUI/Plater.cpp:1394 src/slic3r/GUI/Plater.cpp:1445
msgid "objects"
msgstr "objecten"

#: src/slic3r/GUI/Plater.cpp:1394 src/slic3r/GUI/Plater.cpp:1445
msgid "wipe tower"
msgstr "afveegblok"

#: src/slic3r/GUI/Plater.cpp:1404
msgid "Used Filament (in³)"
msgstr "Gebruikt filament (in³)"

#: src/slic3r/GUI/Plater.cpp:1428
#, boost-format
msgid "Filament at extruder %1%"
msgstr "Filament in extruder %1%"

#: src/slic3r/GUI/Plater.cpp:1434
msgid "(including spool)"
msgstr "(inclusief spoel)"

#: src/slic3r/GUI/Plater.cpp:1443 src/libslic3r/PrintConfig.cpp:1159
#: src/libslic3r/PrintConfig.cpp:3790 src/libslic3r/PrintConfig.cpp:3791
msgid "Cost"
msgstr "Kosten"

#: src/slic3r/GUI/Plater.cpp:1461
msgid "normal mode"
msgstr "normale modus"

#: src/slic3r/GUI/Plater.cpp:1468
msgid "stealth mode"
msgstr "stille modus"

#: src/slic3r/GUI/Plater.cpp:1728
#, boost-format
msgid "Do you want to save the changes to \"%1%\"?"
msgstr "Wilt u de wijzigingen opslaan naar \"%1%\"?"

#: src/slic3r/GUI/Plater.cpp:1729 src/slic3r/GUI/UnsavedChangesDialog.cpp:907
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1604
msgid "Save"
msgstr "Opslaan"

#: src/slic3r/GUI/Plater.cpp:1729 src/slic3r/GUI/UnsavedChangesDialog.cpp:901
msgid "Discard"
msgstr "Afwijzen"

#: src/slic3r/GUI/Plater.cpp:1734 src/slic3r/GUI/Preferences.cpp:331
msgid "Ask for unsaved changes in project"
msgstr "Vraag naar niet-opgeslagen wijzigingen in dit project"

#: src/slic3r/GUI/Plater.cpp:1737
msgid ""
"You will not be asked about it again, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""
"U wordt hier niet opnieuw over gevraagd bij:\n"
"- het sluiten van PrusaSlicer;\n"
"- het laden of openen van een nieuw project"

#: src/slic3r/GUI/Plater.cpp:2203
#, c-format, boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""
"Succesvol ontkoppeld. Het apparat %s(%s) kan nu veilig worden verwijderd uit "
"de computer."

#: src/slic3r/GUI/Plater.cpp:2209
#, c-format, boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr "Uitwerpen van apparat %s(%s) mislukt."

#: src/slic3r/GUI/Plater.cpp:2228 src/slic3r/GUI/Plater.cpp:5210
msgid "New Project"
msgstr "Nieuw project"

#: src/slic3r/GUI/Plater.cpp:2335
msgid "Expand sidebar"
msgstr "Zijbalk uitklappen"

#: src/slic3r/GUI/Plater.cpp:2417
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] ""
"De vorige preset is tijdelijk geïnstalleerd op de actieve instantie van "
"PrusaSlicer"
msgstr[1] ""
"De vorige presets zijn tijdelijk geïnstalleerd op de actieve instantie van "
"PrusaSlicer"

#: src/slic3r/GUI/Plater.cpp:2574
#, boost-format
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr "Laden van bestand \"%1%\" mislukt dankzij een ongeldige configuratie."

#: src/slic3r/GUI/Plater.cpp:2594
#, c-format, boost-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""
"Objectgrootte van bestand %s blijkt nul te zijn.\n"
"Het object is verwijderd van het model"
msgstr[1] ""
"Objectengrootte van bestand %s blijken nul te zijn.\n"
"Het object is verwijderd van het model"

#: src/slic3r/GUI/Plater.cpp:2598
msgid "The size of the object is zero"
msgstr "De afmetingen van het object zijn nul"

#: src/slic3r/GUI/Plater.cpp:2611
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
"De afmetingen van het object van bestand %s lijken in meters te zijn.\n"
"De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen "
"van het object verschalen?"
msgstr[1] ""
"De afmetingen van sommige objecten van bestand %s lijken in meters te zijn.\n"
"De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen "
"van het object verschalen?"

#: src/slic3r/GUI/Plater.cpp:2615 src/slic3r/GUI/Plater.cpp:2637
msgid "The object is too small"
msgstr "Het object is te klein"

#: src/slic3r/GUI/Plater.cpp:2616 src/slic3r/GUI/Plater.cpp:2638
msgid "Apply to all the remaining small objects being loaded."
msgstr "Pas toe op alle resterende kleine objecten die worden geladen."

#: src/slic3r/GUI/Plater.cpp:2633
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
"De afmetingen van het object van bestand %s lijken in inches te zijn.\n"
"De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen "
"van het object verschalen?"
msgstr[1] ""
"De afmetingen van sommige objecten van bestand %s lijken in inches te zijn.\n"
"De gebruikte eenheid van PrusaSlicer is millimeters. Wilt u de afmetingen "
"van het object verschalen?"

#: src/slic3r/GUI/Plater.cpp:2650
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""
"Het bestand bevat meerdere objecten gepositioneerd op verschillende "
"hoogtes.\n"
"Moet het bestand worden geladen als één object met meerdere onderdelen\n"
"in plaats van deze te beschouwen als meerdere objecten?"

#: src/slic3r/GUI/Plater.cpp:2653 src/slic3r/GUI/Plater.cpp:2705
msgid "Multi-part object detected"
msgstr "Meerdelig object gedetecteerd"

#: src/slic3r/GUI/Plater.cpp:2660
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""
"Dit bestand kan niet geladen worden in eenvoudige modus. Wilt u overstappen "
"op geavanceerde modus?"

#: src/slic3r/GUI/Plater.cpp:2661
msgid "Detected advanced data"
msgstr "Geavanceerde data gedetecteerd"

#: src/slic3r/GUI/Plater.cpp:2702
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""
"Meerdere objecten zijn geladen voor een multi-materialprinter.\n"
"Moeten deze objecten beschouwd worden als één object\n"
"met meerdere onderdelen, of als meerdere objecten?"

#: src/slic3r/GUI/Plater.cpp:2821
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""
"Het object is te groot. Daarom is het automatisch verschaald tot de grootte "
"van het printbed."

#: src/slic3r/GUI/Plater.cpp:2822
msgid "Object too large?"
msgstr "Object te groot?"

#: src/slic3r/GUI/Plater.cpp:2902
msgid "Export STL file:"
msgstr "Exporteer .STL-bestand:"

#: src/slic3r/GUI/Plater.cpp:2909
msgid "Export AMF file:"
msgstr "Exporteer .AMF-bestand:"

#: src/slic3r/GUI/Plater.cpp:2915
msgid "Save file as:"
msgstr "Bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:2921
msgid "Export OBJ file:"
msgstr "Exporteer .OBJ-bestand:"

#: src/slic3r/GUI/Plater.cpp:3035
msgid "Delete object which is a part of cut object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3036
msgid "You try to delete an object which is a part of a cut object."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3037
msgid ""
"This action will break a cut information.\n"
"After that PrusaSlicer can't guarantee model consistency"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3040
msgid "Delete object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3045
msgid "Delete Object"
msgstr "Verwijder object"

#: src/slic3r/GUI/Plater.cpp:3064
msgid "Delete All Objects"
msgstr "Verwijder alle objecten"

#: src/slic3r/GUI/Plater.cpp:3093
msgid "Reset Project"
msgstr "Reset project"

#: src/slic3r/GUI/Plater.cpp:3148
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr ""
"Het geselecteerde object kan niet gesplitst worden omdat het maar één "
"onderdeel bevat."

#: src/slic3r/GUI/Plater.cpp:3155
msgid "All non-solid parts (modifiers) were deleted"
msgstr "Alle niet-solide onderdelen (bewerkers) zijn verwijderd"

#: src/slic3r/GUI/Plater.cpp:3157
msgid "Split to Objects"
msgstr "Splits op naar objecten"

#: src/slic3r/GUI/Plater.cpp:3211
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr ""
"Een object heeft custom supportforcering die niet gebruikt worden omdat "
"supports uit staan."

#: src/slic3r/GUI/Plater.cpp:3213
msgid "Enable supports for enforcers only"
msgstr "Sta supports voor forceringen alleen toe"

#: src/slic3r/GUI/Plater.cpp:3362 src/slic3r/GUI/Plater.cpp:4258
msgid "Invalid data"
msgstr "Ongeldige data"

#: src/slic3r/GUI/Plater.cpp:3433
msgid "Another export job is currently running."
msgstr "Een andere export loopt op dit moment."

#: src/slic3r/GUI/Plater.cpp:3519
msgid "Replace from:"
msgstr "Vervangen door:"

#: src/slic3r/GUI/Plater.cpp:3537
msgid "Unable to replace with more than one volume"
msgstr "Niet mogelijk om te vervangen met meer dan één volume"

#: src/slic3r/GUI/Plater.cpp:3537 src/slic3r/GUI/Plater.cpp:3616
msgid "Error during replace"
msgstr "Fout tijdens vervangen"

#: src/slic3r/GUI/Plater.cpp:3608
msgid "Select the new file"
msgstr "Selecteer het nieuwe bestand"

#: src/slic3r/GUI/Plater.cpp:3616
msgid "File for the replace wasn't selected"
msgstr "Vervangbestand is niet geselecteerd"

#: src/slic3r/GUI/Plater.cpp:3703
msgid "Please select the file to reload"
msgstr "Selecteer het bestand om te herladen"

#: src/slic3r/GUI/Plater.cpp:3734 src/slic3r/GUI/Plater.cpp:5366
#: src/slic3r/GUI/Plater.cpp:5376
msgid "The selected file"
msgstr "Het geselecteerde bestand"

#: src/slic3r/GUI/Plater.cpp:3735
msgid "differs from the original file"
msgstr "verschilt ten opzichte van het originele bestand"

#: src/slic3r/GUI/Plater.cpp:3735
msgid "Do you want to replace it"
msgstr "Wilt u het vervangen"

#: src/slic3r/GUI/Plater.cpp:3755 src/slic3r/GUI/Plater.cpp:3761
msgid "Reload from:"
msgstr "Herladen van:"

#: src/slic3r/GUI/Plater.cpp:3876
msgid "Unable to reload:"
msgstr "Niet in staat om te herladen:"

#: src/slic3r/GUI/Plater.cpp:3881
msgid "Error during reload"
msgstr "Fout tijdens herladen"

#: src/slic3r/GUI/Plater.cpp:3899
msgid "Reload all from disk"
msgstr "Herlaad alles van schijf"

#: src/slic3r/GUI/Plater.cpp:4211
msgid "There are active warnings concerning sliced models:"
msgstr "Er zijn actieve waarschuwingen wat betreft de slice:"

#: src/slic3r/GUI/Plater.cpp:4222
msgid "generated warnings"
msgstr "gegeven waarschuwingen"

#: src/slic3r/GUI/Plater.cpp:4267
msgid "Slicing Cancelled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4569
msgid "3D editor view"
msgstr "3D-bewerkingsweergave"

#: src/slic3r/GUI/Plater.cpp:4991
msgid "Undo / Redo is processing"
msgstr "Ongedaan maken / opnieuw doen wordt verwerkt"

#: src/slic3r/GUI/Plater.cpp:4993
#, boost-format
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""
"Wijzigen van het soort printer van %1% naar %2%.\n"
"Sommige %1% presets zijn aangepast. Deze gaan verloren bij het wijzigen van "
"het soort printer."

#: src/slic3r/GUI/Plater.cpp:5195
msgid "Creating a new project while the current project is modified."
msgstr "Een nieuw project aanmaken terwijl het huidige project is aangepast."

#: src/slic3r/GUI/Plater.cpp:5198
msgid "Creating a new project while some presets are modified."
msgstr "Een nieuw project aanmaken terwijl sommige presets zijn aangepast."

#: src/slic3r/GUI/Plater.cpp:5199
msgid "You can keep presets modifications to the new project or discard them"
msgstr ""
"U kunt de aanpassingen in de preset behouden bij het nieuwe project, of deze "
"verwijderen"

#: src/slic3r/GUI/Plater.cpp:5200
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved then new project wouldn't keep them"
msgstr ""
"U kunt preset-wijzigingen behouden, verwerpen of opslaan als nieuwe preset "
"in het nieuwe project.\n"
"Let op dat als de wijzigingen worden opgeslagen, deze niet bewaard worden in "
"het nieuwe project"

#: src/slic3r/GUI/Plater.cpp:5205
msgid "Creating a new project"
msgstr "Maak een nieuw project aan"

#: src/slic3r/GUI/Plater.cpp:5239
msgid "Load Project"
msgstr "Laad project"

#: src/slic3r/GUI/Plater.cpp:5269
msgid "Import Object"
msgstr "Importeer object"

#: src/slic3r/GUI/Plater.cpp:5273
msgid "Import Objects"
msgstr "Importeer objecten"

#: src/slic3r/GUI/Plater.cpp:5302
msgid "Import SLA archive"
msgstr "Importeer SLA-archief"

#: src/slic3r/GUI/Plater.cpp:5366 src/slic3r/GUI/Plater.cpp:5376
msgid "does not contain valid gcode."
msgstr "bevat geen geldige G-code."

#: src/slic3r/GUI/Plater.cpp:5367 src/slic3r/GUI/Plater.cpp:5377
msgid "Error while loading .gcode file"
msgstr "Probleem bij het laden van het .gcode-bestand"

#: src/slic3r/GUI/Plater.cpp:5444
#, boost-format
msgid "%1% - Multiple projects file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5454
msgid "There are several files being loaded, including Project files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5454 src/slic3r/GUI/Plater.cpp:5457
msgid "Select an action to apply to all files."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5457
msgid "There are several files being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5459 src/slic3r/GUI/Plater.cpp:5855
msgid "Action"
msgstr "Actie"

#: src/slic3r/GUI/Plater.cpp:5480
msgid "Import 3D models"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5493
msgid "Start a new instance of PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5507
msgid "Select one to load as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5518
msgid "Select only one file to load the configuration."
msgstr ""

#. TRN %1% is archive path
#: src/slic3r/GUI/Plater.cpp:5565
#, boost-format
msgid "Loading of a ZIP archive on path %1% has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5624
#, boost-format
msgid "Failed to unzip file to %1%: %2% "
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5634
#, boost-format
msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5834
msgid "Load project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5843
msgid "Open as project"
msgstr "Open als project"

#: src/slic3r/GUI/Plater.cpp:5844
msgid "Import 3D models only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5845
msgid "Import config only"
msgstr "Importeer alleen de configuratie"

#: src/slic3r/GUI/Plater.cpp:5847
msgid "Start new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5850
msgid "Select an action to apply to the file"
msgstr "Selecteer een commando om toe te passen op het bestand"

#: src/slic3r/GUI/Plater.cpp:5871
msgid "Don't show again"
msgstr "Laat niet meer zien"

#: src/slic3r/GUI/Plater.cpp:5912
msgid "You can open only one .gcode file at a time."
msgstr "Je kunt maar één .gcode-bestand tegelijk openen."

#: src/slic3r/GUI/Plater.cpp:5913
msgid "Drag and drop G-code file"
msgstr "Versleep en plaats G-code-bestand"

#: src/slic3r/GUI/Plater.cpp:6007
msgid "Load File"
msgstr "Laad bestand"

#: src/slic3r/GUI/Plater.cpp:6012
msgid "Load Files"
msgstr "Laad bestanden"

#: src/slic3r/GUI/Plater.cpp:6062
msgid "All objects will be removed, continue?"
msgstr "Alle objecten worden verwijderd. Doorgaan?"

#: src/slic3r/GUI/Plater.cpp:6073
msgid "Delete Selected Objects"
msgstr "Verwijder geselecteerde objecten"

#: src/slic3r/GUI/Plater.cpp:6082
msgid "Increase Instances"
msgstr "Verhoog aantal instanties"

#: src/slic3r/GUI/Plater.cpp:6138
msgid "Decrease Instances"
msgstr "Verlaag aantal instanties"

#: src/slic3r/GUI/Plater.cpp:6196
msgid "Enter the number of copies:"
msgstr "Voer het aantal kopieën in:"

#: src/slic3r/GUI/Plater.cpp:6197
msgid "Copies of the selected object"
msgstr "Kopieën van het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:6200
#, c-format, boost-format
msgid "Set numbers of copies to %d"
msgstr "Stel aantal kopieën in voor %d"

#: src/slic3r/GUI/Plater.cpp:6221
msgid "Fill bed"
msgstr "Vul het bed"

#: src/slic3r/GUI/Plater.cpp:6363
msgid "Save G-code file as:"
msgstr ".gcode-bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:6363
msgid "Save SL1 / SL1S file as:"
msgstr "SL1 / SL1S bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:6376
msgid "The provided file name is not valid."
msgstr "De gegeven naam is niet geldig."

#: src/slic3r/GUI/Plater.cpp:6377
msgid "The following characters are not allowed by a FAT file system:"
msgstr ""
"De volgende karakters worden niet toegestaan in een FAT-bestandssysteem:"

#: src/slic3r/GUI/Plater.cpp:6437
msgid ""
"Unable to perform boolean operation on model meshes. Only positive parts "
"will be exported."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6591
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""
"Het bed is leeg.\n"
"Wilt u toch het project opslaan?"

#: src/slic3r/GUI/Plater.cpp:6591
msgid "Save project"
msgstr "Project opslaan"

#: src/slic3r/GUI/Plater.cpp:6826
msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6826 src/slic3r/GUI/PrintHostDialogs.cpp:132
msgid "Upload and Print"
msgstr "Upload en print"

#: src/slic3r/GUI/Plater.cpp:7239
msgid "Export"
msgstr "Exporteer"

#: src/slic3r/GUI/Plater.cpp:7384
msgid "Paste From Clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/Preferences.cpp:222 src/slic3r/GUI/Tab.cpp:2386
#: src/slic3r/GUI/Tab.cpp:2655 src/slic3r/GUI/Tab.cpp:2773
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
msgid "General"
msgstr "Algemeen"

#: src/slic3r/GUI/Preferences.cpp:240
msgid "Remember output directory"
msgstr "Onthoud de opslaglocatie"

#: src/slic3r/GUI/Preferences.cpp:241
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"Als dit aan staat zal PrusaSlicer de opslaglocatie gebruiken in plaats van "
"de originele locatie."

#: src/slic3r/GUI/Preferences.cpp:245
msgid "Auto-center parts"
msgstr "Centreer onderdelen automatisch"

#: src/slic3r/GUI/Preferences.cpp:246
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""
"Als dit aan staat zal PrusaSlicer objecten automatisch centreren in het "
"midden."

#: src/slic3r/GUI/Preferences.cpp:250
msgid "Background processing"
msgstr "Slicen op de achtergrond"

#: src/slic3r/GUI/Preferences.cpp:251
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"Als dit aanstaat zal PrusaSlicer objecten op de achtergrond slicen om tijd "
"te besparen bij het exporteren van de G-code."

#: src/slic3r/GUI/Preferences.cpp:256
msgid "Alert when supports needed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:257
msgid ""
"If this is enabled, Slic3r will raise alerts when it detects issues in the "
"sliced object, that can be resolved with supports (and brim). Examples of "
"such issues are floating object parts, unsupported extrusions and low bed "
"adhesion."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:267
msgid "Export sources full pathnames to 3mf and amf"
msgstr "Exporteer de volledige padnamen naar .3MF- en .AMF-bestanden"

#: src/slic3r/GUI/Preferences.cpp:268
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""
"Als dit is ingeschakeld is het 'herladen van de schijf'-commando toegestaan "
"om automatisch bestanden te vinden en laden als deze worden aangeroepen."

#: src/slic3r/GUI/Preferences.cpp:275
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""
"Als dit aanstaat wordt PrusaSlicer als standaardprogramma ingesteld om .3MF-"
"bestanden te openen."

#: src/slic3r/GUI/Preferences.cpp:280
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""
"Als dit aanstaat wordt PrusaSlicer als standaardprogramma ingesteld om .STL-"
"bestanden te openen."

#: src/slic3r/GUI/Preferences.cpp:289
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer updates of ingebouwde presets op de "
"achtergrond downloaden. Deze updates worden gedownload naar een tijdelijke "
"locatie. Als een nieuwe preset beschikbaar komt, zal dit gemeld worden bij "
"de eerstvolgende keer opstarten."

#: src/slic3r/GUI/Preferences.cpp:294
msgid "Suppress \" - default - \" presets"
msgstr "Verberg standaardpresets"

#: src/slic3r/GUI/Preferences.cpp:295
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"Verberg standaardpresets bij de print-, filament- en printerpresets als er "
"andere geldige presets beschikbaar zijn."

#: src/slic3r/GUI/Preferences.cpp:299
msgid "Suppress \" Template \" filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:300
msgid ""
"Suppress \" Template \" filament presets in configuration wizard and sidebar "
"visibility."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:304
msgid "Show incompatible print and filament presets"
msgstr "Toon niet compatibele print- en filamentpresets"

#: src/slic3r/GUI/Preferences.cpp:305
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"Als dit aan staat worden de print- en filamentpresets getoond in de presets-"
"editor, zelfs als ze als niet compatibel met de actieve printer zijn "
"gemarkeerd"

#: src/slic3r/GUI/Preferences.cpp:312
msgid "Show load project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:313
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application or open it from a browser, shows a dialog asking to select the "
"action to take on the file to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:319 src/slic3r/GUI/Preferences.cpp:323
msgid "Allow just a single PrusaSlicer instance"
msgstr "Sta één PrusaSlicer-instantie toe"

#: src/slic3r/GUI/Preferences.cpp:320
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""
"Op OSX draait er altijd slechts één instantie van het programma. Het is "
"mogelijk om meerdere instanties van hetzelfde programma te draaien via het "
"commandoprompt. In zulke gevallen geldt deze instelling slechts voor één "
"instantie."

#: src/slic3r/GUI/Preferences.cpp:324
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer een andere instantie van PrusaSlicer "
"openen als die wordt gestart."

#: src/slic3r/GUI/Preferences.cpp:332
msgid ""
"Always ask for unsaved changes in project, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""
"Vraag altijd naar niet-opgeslagen wijzigingen in het project als:\n"
"- PrusaSlicer afgesloten wordt,\n"
"- Een nieuw project wordt geladen of aangemaakt"

#: src/slic3r/GUI/Preferences.cpp:340
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:928
msgid ""
"Ask to save unsaved changes in presets when closing the application or when "
"loading a new project"
msgstr ""
"Vraag om niet-opgeslagen wijziging op te slaan in presets bij het sluiten "
"van het programma of het laden van een nieuw project"

#: src/slic3r/GUI/Preferences.cpp:341
msgid ""
"Always ask for unsaved changes in presets, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""
"Vraag altijd naar niet-opgeslagen wijzigingen in presets als:\n"
"- PrusaSlicer afgesloten wordt terwijl presets zijn gewijzigd,\n"
"- Een nieuw project wordt geladen terwijl sommige presets zijn gewijzigd"

#: src/slic3r/GUI/Preferences.cpp:347
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:927
msgid "Ask for unsaved changes in presets when selecting new preset"
msgstr ""
"Vraag naar niet-opgeslagen wijzigingen in presets bij het selecteren van een "
"nieuwe preset"

#: src/slic3r/GUI/Preferences.cpp:348
msgid ""
"Always ask for unsaved changes in presets when selecting new preset or "
"resetting a preset"
msgstr ""
"Vraag altijd naar niet-opgeslagen wijzigingen in presets bij het resetten "
"van een preset of het selecteren van een nieuwe preset"

#: src/slic3r/GUI/Preferences.cpp:352
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:926
msgid "Ask for unsaved changes in presets when creating new project"
msgstr ""
"Vraag naar niet-opgeslagen wijzigingen in presets bij het aanmaken van een "
"nieuw project"

#: src/slic3r/GUI/Preferences.cpp:353
msgid "Always ask for unsaved changes in presets when creating new project"
msgstr ""
"Vraag altijd naar niet-opgeslagen wijzigingen in presets bij het aanmaken "
"van een new project"

#: src/slic3r/GUI/Preferences.cpp:359
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr "Open .gcode-bestanden met de PrusaSlicer G-code weergave"

#: src/slic3r/GUI/Preferences.cpp:360
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""
"Als dit aanstaat wordt PrusaSlicer G-code Viewer als standaardprogramma "
"ingesteld om .gcode-bestanden te openen."

#: src/slic3r/GUI/Preferences.cpp:367
msgid "Use Retina resolution for the 3D scene"
msgstr "Gebruik hoge resolutie voor de modelweergave"

#: src/slic3r/GUI/Preferences.cpp:368
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"Als dit is ingeschakeld zal de modelweergave worden gerenderd in hoge "
"resolutie. Als u problemen ondervindt met de prestaties kan het uitschakelen "
"van deze optie mogelijk helpen."

#: src/slic3r/GUI/Preferences.cpp:377 src/slic3r/GUI/Preferences.cpp:378
msgid "Show splash screen"
msgstr "Toon startscherm"

#: src/slic3r/GUI/Preferences.cpp:383
msgid "If enabled, PrusaSlicer will be open at the position it was closed"
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer openen op de positie waarop die is "
"afgesloten"

#: src/slic3r/GUI/Preferences.cpp:388
msgid "Clear Undo / Redo stack on new project"
msgstr "Leeg lijst met ongedaan maken / opnieuw doen bij nieuwe projecten"

#: src/slic3r/GUI/Preferences.cpp:389
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr ""
"Leeg lijst met ongedaan maken / opnieuw doen bij nieuwe projecten of wanneer "
"een bestaand project is geladen."

#: src/slic3r/GUI/Preferences.cpp:394
msgid "Enable support for legacy 3DConnexion devices"
msgstr "Sta support voor oudere 3DConnexion-apparaten toe"

#: src/slic3r/GUI/Preferences.cpp:395
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""
"Als dit aanstaat is de oudere 3DConnexion-apparaten-instellingenvenster "
"beschikbaar door te drukken op CTRL+M"

#: src/slic3r/GUI/Preferences.cpp:402
msgid "Camera"
msgstr "Camera"

#: src/slic3r/GUI/Preferences.cpp:412
msgid "Use perspective camera"
msgstr "Gebruik perspectiefweergave"

#: src/slic3r/GUI/Preferences.cpp:413
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""
"Als dit is ingeschakeld zal de weergave op perspectief worden gezet. Anders "
"wordt een orthografische weergave gebruikt."

#: src/slic3r/GUI/Preferences.cpp:417
msgid "Use free camera"
msgstr "Gebruik vrij beweegbare camera"

#: src/slic3r/GUI/Preferences.cpp:418
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""
"Als dit is ingeschakeld wordt de vrij beweegbare camera gebruikt, anders een "
"vaste camera."

#: src/slic3r/GUI/Preferences.cpp:422
msgid "Reverse direction of zoom with mouse wheel"
msgstr "Zoomrichting van scrollwieltje omkeren"

#: src/slic3r/GUI/Preferences.cpp:423
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr "Als dit aanstaat wordt de scrollrichting de andere kant op ingesteld"

#: src/slic3r/GUI/Preferences.cpp:429
msgid "GUI"
msgstr "GUI"

#: src/slic3r/GUI/Preferences.cpp:469
msgid "Sequential slider applied only to top layer"
msgstr "Opeenvolgende schuif alleen toegepast op toplaag"

#: src/slic3r/GUI/Preferences.cpp:470
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer. If disabled, changes made using the sequential slider, "
"in preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:476
msgid "Show sidebar collapse/expand button"
msgstr "Toon zijbalk in-/uitklappen-knop"

#: src/slic3r/GUI/Preferences.cpp:477
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""
"Als dit is ingeschakeld zal de knop om de zijbalk in te klappen getoond "
"worden in de rechterbovenhoek van de modelweergave"

#: src/slic3r/GUI/Preferences.cpp:488
msgid "Use colors for axes values in Manipulation panel"
msgstr "Gebruik kleuren voor waarden voor assen in het bewerkingsmenu"

#: src/slic3r/GUI/Preferences.cpp:489
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""
"Als dit is ingeschakeld worden namen en waarden van assen gekleurd volgens "
"de kleur van de as. Als dit uitstaat wordt de oude interface gebruikt."

#: src/slic3r/GUI/Preferences.cpp:494
msgid "Order object volumes by types"
msgstr "Sorteer objectvolumes op type"

#: src/slic3r/GUI/Preferences.cpp:495
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""
"Als dit is ingeschakeld worden volumes altijd gesorteerd binnen een object. "
"De juiste volgorde is Model - Negatieve volumes - Modificators - "
"Supportblokkering - Supportforcering. Als dit uitstaat kan u de onderdelen "
"zelf schikken. Een van de modellen moet op de eerste plaats staan."

#: src/slic3r/GUI/Preferences.cpp:500
msgid "Show non-manifold edges"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:501
msgid "If enabled, shows non-manifold edges."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:505
msgid "Allow automatically color change"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:506
msgid ""
"If enabled, related notification will be shown, when sliced object looks "
"like a logo or a sign."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:511
msgid "Set settings tabs as menu items (experimental)"
msgstr "Stel instellingentabs in als menu-onderdelen (experimenteel)"

#: src/slic3r/GUI/Preferences.cpp:512
msgid ""
"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
"will be used."
msgstr ""
"Als dit is ingeschakeld worden instellingentabs geplaatst als menu-"
"onderdelen. Als dit uitstaat wordt de oude interface gebruikt."

#: src/slic3r/GUI/Preferences.cpp:519
msgid "Show \"Tip of the day\" notification after start"
msgstr "Toon \"Tip van de dag\" melding bij het starten"

#: src/slic3r/GUI/Preferences.cpp:520
msgid "If enabled, useful hints are displayed at startup."
msgstr "Als dit is ingeschakeld worden handige tips getoond bij het starten."

#: src/slic3r/GUI/Preferences.cpp:524
msgid "Notify about new releases"
msgstr "Notificaties over nieuwe versies"

#: src/slic3r/GUI/Preferences.cpp:525
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""
"U wordt op de hoogte gebracht over nieuwe versies bij het opstarten: Alles = "
"reguliere versies en alpha/beta-versies. Standaardversies = alleen reguliere "
"versies."

#: src/slic3r/GUI/Preferences.cpp:528
msgid "Release only"
msgstr "Alleen standaardversies"

#: src/slic3r/GUI/Preferences.cpp:535
msgid "Use custom size for toolbar icons"
msgstr "Aangepaste pictogramgrootte in de modelweergave"

#: src/slic3r/GUI/Preferences.cpp:536
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""
"Hiermee kan de grootte van werkbalkpictogrammen handmatig ingesteld worden."

#: src/slic3r/GUI/Preferences.cpp:554 src/slic3r/GUI/Tab.cpp:1671
msgid "Other"
msgstr "Overige"

#: src/slic3r/GUI/Preferences.cpp:571
msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:577
msgid "Allow downloads from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:578
msgid "If enabled, PrusaSlicer will be allowed to download from Printables.com"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:588
msgid "Render"
msgstr "Render"

#: src/slic3r/GUI/Preferences.cpp:598
msgid "Use environment map"
msgstr "Gebruik omgevingskaart"

#: src/slic3r/GUI/Preferences.cpp:599
msgid "If enabled, renders object using the environment map."
msgstr ""
"Als dit is ingeschakeld worden objecten gerenderd met de omgevingskaart."

#: src/slic3r/GUI/Preferences.cpp:607
msgid "Dark mode (experimental)"
msgstr "Donkere modus (experimenteel)"

#: src/slic3r/GUI/Preferences.cpp:617
msgid "Enable dark mode"
msgstr "Gebruik donkere modus"

#: src/slic3r/GUI/Preferences.cpp:618
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr ""
"Als dit is ingeschakeld worden kleuren van de donkere modus gebruikt. De "
"oude kleuren worden gebruikt als dit uit staat."

#: src/slic3r/GUI/Preferences.cpp:625
msgid "Use system menu for application"
msgstr "Gebruik systeemmenu voor programma"

#: src/slic3r/GUI/Preferences.cpp:626
msgid ""
"If enabled, application will use the standard Windows system menu,\n"
"but on some combination of display scales it can look ugly. If disabled, old "
"UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:702
msgid "Changes for the critical options"
msgstr "Aanpassingen voor de kritische opties"

#: src/slic3r/GUI/Preferences.cpp:704
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""
"Sommige opties aanpassen kan een herstart veroorzaken.\n"
"U kunt de inhoud van het bed kwijtraken."

#: src/slic3r/GUI/Preferences.cpp:897
msgid "Icon size in a respect to the default size"
msgstr "Pictogramgrootte vergeleken met de originele grootte"

#: src/slic3r/GUI/Preferences.cpp:912
msgid "Select toolbar icon size in respect to the default one."
msgstr "Selecteer werkbalk-pictogramgrootte in verhouding tot de originele."

#: src/slic3r/GUI/Preferences.cpp:947
msgid "Layout Options"
msgstr "Layout-opties"

#: src/slic3r/GUI/Preferences.cpp:956
msgid "Old regular layout with the tab bar"
msgstr "Oude standaardlayout met de tabbladen"

#: src/slic3r/GUI/Preferences.cpp:957
msgid "New layout, access via settings button in the top menu"
msgstr ""
"Nieuwe layout, krijg toegang tot de instellingen via de instellingenknop in "
"het topmenu"

#: src/slic3r/GUI/Preferences.cpp:958
msgid "Settings in non-modal window"
msgstr "Instelling voor niet-modaal venster"

#: src/slic3r/GUI/Preferences.cpp:1000
msgid "Text colors"
msgstr "Tekstkleuren"

#: src/slic3r/GUI/Preferences.cpp:1024
msgid "Mode markers"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1052
msgid "Application font size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1087
msgid "Revert font to default"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:1099
msgid "Font size"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:254
#: src/slic3r/GUI/PresetComboBoxes.cpp:306
#: src/slic3r/GUI/PresetComboBoxes.cpp:844
#: src/slic3r/GUI/PresetComboBoxes.cpp:911
#: src/slic3r/GUI/PresetComboBoxes.cpp:1078
#: src/slic3r/GUI/PresetComboBoxes.cpp:1135
msgid "System presets"
msgstr "Systeempresets"

#: src/slic3r/GUI/PresetComboBoxes.cpp:310
#: src/slic3r/GUI/PresetComboBoxes.cpp:917
#: src/slic3r/GUI/PresetComboBoxes.cpp:1140
msgid "User presets"
msgstr "Presets van de gebruiker"

#: src/slic3r/GUI/PresetComboBoxes.cpp:321
msgid "Incompatible presets"
msgstr "Niet compatibele presets"

#: src/slic3r/GUI/PresetComboBoxes.cpp:364
#, boost-format
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr "Weet je zeker dat je \"%1%\"-printer wilt verwijderen?"

#: src/slic3r/GUI/PresetComboBoxes.cpp:366
msgid "Delete Physical Printer"
msgstr "Verwijder fysieke printer"

#: src/slic3r/GUI/PresetComboBoxes.cpp:612
msgid "Click to edit preset"
msgstr "Klik om de preset te wijzigen"

#: src/slic3r/GUI/PresetComboBoxes.cpp:734
#: src/slic3r/GUI/PresetComboBoxes.cpp:782
msgid "Add/Remove presets"
msgstr "Toevoegen/verwijderen van presets"

#: src/slic3r/GUI/PresetComboBoxes.cpp:739
#: src/slic3r/GUI/PresetComboBoxes.cpp:787 src/slic3r/GUI/Tab.cpp:3503
msgid "Add physical printer"
msgstr "Voeg fysieke printer toe"

#: src/slic3r/GUI/PresetComboBoxes.cpp:753
msgid "Edit preset"
msgstr "Bewerk preset"

#: src/slic3r/GUI/PresetComboBoxes.cpp:759
msgid "Change extruder color"
msgstr "Verander extruderkleur"

#: src/slic3r/GUI/PresetComboBoxes.cpp:767 src/slic3r/GUI/Tab.cpp:3503
msgid "Edit physical printer"
msgstr "Bewerk fysieke printer"

#: src/slic3r/GUI/PresetComboBoxes.cpp:773
msgid "Open the physical printer URL"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:778
msgid "Delete physical printer"
msgstr "Verwijder fysieke printer"

#: src/slic3r/GUI/PresetComboBoxes.cpp:925
#: src/slic3r/GUI/PresetComboBoxes.cpp:1151
msgid "Template presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:936
#: src/slic3r/GUI/PresetComboBoxes.cpp:1165
msgid "Physical printers"
msgstr "Fysieke printers"

#: src/slic3r/GUI/PresetComboBoxes.cpp:960
msgid "Add/Remove filaments"
msgstr "Verwijder of voeg filamenten toe"

#: src/slic3r/GUI/PresetComboBoxes.cpp:962
msgid "Add/Remove materials"
msgstr "Verwijder of voeg materialen toe"

#: src/slic3r/GUI/PresetComboBoxes.cpp:964
#: src/slic3r/GUI/PresetComboBoxes.cpp:1189
msgid "Add/Remove printers"
msgstr "Voeg toe/verwijder printers"

#: src/slic3r/GUI/PresetHints.cpp:32
#, boost-format
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""
"Als de geschatte laagtijd onder de ~%1%s komt, zal de ventilator draaien op "
"%2%%% en de printsnelheid wordt zover gereduceerd dat niet meer dan %3%s "
"worden gebruikt voor die laag (echter nooit langzamer dan %4%mm/s)."

#: src/slic3r/GUI/PresetHints.cpp:40
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""
"Als de geschatte laagtijd groter is, maar nog steeds onder de ~%1%s, zal de "
"ventilator draaien op een proportioneel verlagende snelheid tussen %2%%% en "
"%3%%%."

#: src/slic3r/GUI/PresetHints.cpp:44
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr ""
"Als de geschatte laagtijd groter is, maar nog onder ~%1%s, draait de "
"ventilator op %2%%%"

#: src/slic3r/GUI/PresetHints.cpp:55
#, boost-format
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""
"Ventilatorsnelheid wordt gelijkmatig opgevoerd vanaf 0 op laag %1% naar %2%"
"%% op laag %3%."

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "During the other layers, fan will always run at %1%%%"
msgstr "Tijdens de overige lagen draait de ventilator altijd op %1%%%"

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "Fan will always run at %1%%%"
msgstr "Ventilator zal altijd draaien op %1%%%"

#: src/slic3r/GUI/PresetHints.cpp:59
#, boost-format
msgid "except for the first %1% layers."
msgstr "behalve voor de eerste %1% lagen."

#: src/slic3r/GUI/PresetHints.cpp:61
msgid "except for the first layer."
msgstr "behalve voor de eerste laag."

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "During the other layers, fan will be turned off."
msgstr "Tijdens de overige lagen wordt de ventilator uitgezet."

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "Fan will be turned off."
msgstr "Ventilator wordt uitgezet."

#: src/slic3r/GUI/PresetHints.cpp:170
msgid "external perimeters"
msgstr "buitenperimeters"

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "perimeters"
msgstr "perimeters"

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr "vulling"

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "solid infill"
msgstr "dichte vulling"

#: src/slic3r/GUI/PresetHints.cpp:178
msgid "top solid infill"
msgstr "bovenste dichte vulling"

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "support"
msgstr "support"

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "support interface"
msgstr "supportinterface"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "First layer volumetric"
msgstr "Eerste laag volumetrisch"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Bridging volumetric"
msgstr "Volumetrische bruggen"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Volumetric"
msgstr "Volumetrisch"

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "flow rate is maximized"
msgstr "debiet is gemaximaliseerd"

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "by the print profile maximum"
msgstr "door het printprofiel maximaal"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "when printing"
msgstr "tijdens het printen van"

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "with a volumetric rate"
msgstr "met een volumetrisch debiet van"

#: src/slic3r/GUI/PresetHints.cpp:197
#, c-format, boost-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr "%3.2f mm³/s en een filamentsnelheid van %3.2f mm/s."

#: src/slic3r/GUI/PresetHints.cpp:215
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""
"Aanbevolen minimale wanddikte. Niet beschikbaar in verband met ongeldige "
"laagdikte."

#: src/slic3r/GUI/PresetHints.cpp:221
#, c-format, boost-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr "Aanbevolen objecten met dunne wanden voor laagdikte %.2fmm en"

#: src/slic3r/GUI/PresetHints.cpp:236
#, c-format, boost-format
msgid "%d lines: %.2f mm"
msgstr "%d lijnen: %.2fmm"

#: src/slic3r/GUI/PresetHints.cpp:240
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""
"Aanbevolen dunne wanden: not beschikbaar door extreem smalle extrusiebreedte."

#: src/slic3r/GUI/PresetHints.cpp:269
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""
"Top/bodem-shelldikte hint: niet beschikbaar door een ongeldige laagdikte."

#: src/slic3r/GUI/PresetHints.cpp:282
#, boost-format
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr "Bovenzijde is %1% mm dik bij een laagdikte van %2% mm."

#: src/slic3r/GUI/PresetHints.cpp:285
#, boost-format
msgid "Minimum top shell thickness is %1% mm."
msgstr "Minimale dikte van de bovenzijde is %1% mm."

#: src/slic3r/GUI/PresetHints.cpp:288
msgid "Top is open."
msgstr "Bovenzijde is open."

#: src/slic3r/GUI/PresetHints.cpp:301
#, boost-format
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr "Onderzijde is %1% mm dik bij een laagdikte van %2% mm."

#: src/slic3r/GUI/PresetHints.cpp:304
#, boost-format
msgid "Minimum bottom shell thickness is %1% mm."
msgstr "Minimale dikte van onderzijde is %1% mm."

#: src/slic3r/GUI/PresetHints.cpp:307
msgid "Bottom is open."
msgstr "Onderzijde is open."

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Send G-Code to printer host"
msgstr "Stuur G-code naar printerhost"

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Upload to Printer Host with the following filename:"
msgstr "Upload naar printerhost met de volgende bestandsnaam:"

#: src/slic3r/GUI/PrintHostDialogs.cpp:55
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""
"Gebruik schuine streepjes ( / ) als mapscheidingstekens als dat nodig is."

#: src/slic3r/GUI/PrintHostDialogs.cpp:64
msgid "Group"
msgstr "Groep"

#: src/slic3r/GUI/PrintHostDialogs.cpp:74
#: src/slic3r/GUI/PrintHostDialogs.cpp:83
msgid "Upload to storage"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:105
#, c-format, boost-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr "Bestandsnaam eindigt niet op \"%s\". Wilt u doorgaan?"

#: src/slic3r/GUI/PrintHostDialogs.cpp:112
msgid "Upload"
msgstr "Upload"

#: src/slic3r/GUI/PrintHostDialogs.cpp:122
msgid "Upload to Queue"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:143
msgid "Upload and Simulate"
msgstr "Uploaden en simuleren"

#: src/slic3r/GUI/PrintHostDialogs.cpp:298
msgid "ID"
msgstr "ID"

#: src/slic3r/GUI/PrintHostDialogs.cpp:299
msgid "Progress"
msgstr "Voortgang"

#: src/slic3r/GUI/PrintHostDialogs.cpp:300
msgid "Status"
msgstr "Status"

#: src/slic3r/GUI/PrintHostDialogs.cpp:301
msgid "Host"
msgstr "Host"

#: src/slic3r/GUI/PrintHostDialogs.cpp:302
msgctxt "OfFile"
msgid "Size"
msgstr "Grootte"

#: src/slic3r/GUI/PrintHostDialogs.cpp:303
msgid "Filename"
msgstr "Bestandsnaam"

#: src/slic3r/GUI/PrintHostDialogs.cpp:304
msgid "Message"
msgstr "Bericht"

#: src/slic3r/GUI/PrintHostDialogs.cpp:308
msgid "Cancel selected"
msgstr "Annuleren geselecteerd"

#: src/slic3r/GUI/PrintHostDialogs.cpp:310
msgid "Show error message"
msgstr "Toon foutbericht"

#: src/slic3r/GUI/PrintHostDialogs.cpp:368
#: src/slic3r/GUI/PrintHostDialogs.cpp:423
msgid "Enqueued"
msgstr "In de wachtrij geplaatst"

#: src/slic3r/GUI/PrintHostDialogs.cpp:424
msgid "Uploading"
msgstr "Uploaden"

#: src/slic3r/GUI/PrintHostDialogs.cpp:426
msgid "Cancelling"
msgstr "Annuleren"

#: src/slic3r/GUI/PrintHostDialogs.cpp:427
msgid "Cancelled"
msgstr "Geannuleerd"

#: src/slic3r/GUI/PrintHostDialogs.cpp:428
msgid "Completed"
msgstr "Voltooid"

#: src/slic3r/GUI/PrintHostDialogs.cpp:476
msgid "Error uploading to print host"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:29
msgid "NO RAMMING AT ALL"
msgstr "Fout: geen ramming"

#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:116
#: src/libslic3r/PrintConfig.cpp:1042 src/libslic3r/PrintConfig.cpp:1086
#: src/libslic3r/PrintConfig.cpp:1101 src/libslic3r/PrintConfig.cpp:3643
#: src/libslic3r/PrintConfig.cpp:3652 src/libslic3r/PrintConfig.cpp:3661
#: src/libslic3r/PrintConfig.cpp:3807 src/libslic3r/PrintConfig.cpp:3815
#: src/libslic3r/PrintConfig.cpp:3823 src/libslic3r/PrintConfig.cpp:3830
#: src/libslic3r/PrintConfig.cpp:3838 src/libslic3r/PrintConfig.cpp:3846
msgid "s"
msgstr "s"

#: src/slic3r/GUI/RammingChart.cpp:95
msgid "Volumetric speed"
msgstr "Volumetrische snelheid"

#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:999
#: src/libslic3r/PrintConfig.cpp:1867
msgid "mm³/s"
msgstr "mm³/s"

#: src/slic3r/GUI/SavePresetDialog.cpp:91
#: src/slic3r/GUI/SavePresetDialog.cpp:92
msgid "Save print settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:93
msgid "Save filament settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:94
msgid "Save material settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:95
msgid "Save printer settings as"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:169
msgid "The following characters are not allowed in the name"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:176
msgid "The following suffix is not allowed in the name"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:182
msgid "This name is reserved, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:188
msgid "This name is used for a system profile name, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:189
msgid "Cannot overwrite a system profile."
msgstr "Een systeemprofiel kan niet overschreven worden."

#: src/slic3r/GUI/SavePresetDialog.cpp:194
msgid "This name is used for an external profile name, use another."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:195
msgid "Cannot overwrite an external profile."
msgstr "Een extern profiel kan niet overschreven worden."

#: src/slic3r/GUI/SavePresetDialog.cpp:205
msgid "Save preset modifications to existing user profile"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:210
#, boost-format
msgid "Preset with name \"%1%\" already exists."
msgstr "Preset met de naam '%1%' bestaat al."

#: src/slic3r/GUI/SavePresetDialog.cpp:212
#, boost-format
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""
"Preset met de naam \"%1%\" bestaat al en is niet compatibel met de "
"geselecteerde printer."

#: src/slic3r/GUI/SavePresetDialog.cpp:213
msgid "Note: This preset will be replaced after saving"
msgstr "Let op: deze preset wordt vervangen na het opslaan"

#: src/slic3r/GUI/SavePresetDialog.cpp:219
msgid "The name cannot be empty."
msgstr "De naam is ongeldig."

#: src/slic3r/GUI/SavePresetDialog.cpp:230
msgid "The name is too long."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:235
msgid "The name cannot start with space character."
msgstr "De naam kan niet beginnen met een spatie."

#: src/slic3r/GUI/SavePresetDialog.cpp:240
msgid "The name cannot end with space character."
msgstr "De naam kan niet eindigen met een spatie."

#: src/slic3r/GUI/SavePresetDialog.cpp:245
msgid "The name cannot be the same as a preset alias name."
msgstr "De naam kan niet gelijk zijn als de presetnaam."

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/SavePresetDialog.cpp:289 src/slic3r/GUI/Tab.cpp:169
msgid "Save preset"
msgstr "Preset opslaan"

#: src/slic3r/GUI/SavePresetDialog.cpp:289
msgid "Save presets"
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/SavePresetDialog.cpp:297 src/slic3r/GUI/Tab.cpp:171
msgid "Rename preset"
msgstr ""

#. TRN Suffix for the preset name. Have to be a noun.
#: src/slic3r/GUI/SavePresetDialog.cpp:325
msgctxt "PresetName"
msgid "Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/SavePresetDialog.cpp:345
msgid "Save as profile derived from current printer only."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:405
#, boost-format
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""
"Je heb de fysieke printer \"%1%\" geselecteerd\n"
"met gerelateerde printerpreset \"%2%\""

#: src/slic3r/GUI/SavePresetDialog.cpp:444
#, boost-format
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr "Wat wil je doen met de preset \"%1%\" na het opslaan?"

#: src/slic3r/GUI/SavePresetDialog.cpp:447
#, boost-format
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr "Verander \"%1%\" naar \"%2%\" voor deze fysieke printer \"%3%\""

#: src/slic3r/GUI/SavePresetDialog.cpp:448
#, boost-format
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr "Voeg \"%1%\" als volgende preset toe aan de fysieke printer \"%2%\""

#: src/slic3r/GUI/SavePresetDialog.cpp:449
#, boost-format
msgid "Just switch to \"%1%\" preset"
msgstr "Schakel naar de \"%1%\"-preset"

#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
#: src/slic3r/GUI/Tab.cpp:2822
msgid "Stealth"
msgstr "Stille modus"

#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
#: src/slic3r/GUI/Tab.cpp:2816
msgid "Normal"
msgstr "Normaal"

#: src/slic3r/GUI/Selection.cpp:169
msgid "Selection-Add"
msgstr "Selectie - Voeg toe"

#: src/slic3r/GUI/Selection.cpp:210
msgid "Selection-Remove"
msgstr "Selectie - Verwijder"

#: src/slic3r/GUI/Selection.cpp:242
msgid "Selection-Add Object"
msgstr "Selectie - Voeg object toe"

#: src/slic3r/GUI/Selection.cpp:261
msgid "Selection-Remove Object"
msgstr "Selectie - Verwijder object"

#: src/slic3r/GUI/Selection.cpp:279
msgid "Selection-Add Instance"
msgstr "Selectie - Voeg instantie toe"

#: src/slic3r/GUI/Selection.cpp:298
msgid "Selection-Remove Instance"
msgstr "Selectie - Verwijder instantie"

#: src/slic3r/GUI/Selection.cpp:395
msgid "Selection-Add All"
msgstr "Selectie - Voeg alle toe"

#: src/slic3r/GUI/Selection.cpp:420
msgid "Selection-Remove All"
msgstr "Selectie - Verwijder alle"

#: src/slic3r/GUI/Selection.cpp:1080
msgid "Scale To Fit"
msgstr "Verschaal tot het past"

#: src/slic3r/GUI/Selection.cpp:1415
msgid ""
"The currently manipulated object is tilted or contains tilted parts "
"(rotation angles are not multiples of 90°). Non-uniform scaling of tilted "
"objects is only possible in non-local coordinate systems, once the rotation "
"is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1418
msgid "This operation is irreversible."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:117
msgid "Data to send"
msgstr "Data om te sturen"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:557
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:624
msgid "Send system info"
msgstr "Stuur systeeminfo"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:587
#, boost-format
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""
"Dit is de eerste keer dat u %1% draait. We zouden u graag willen vragen om "
"uw systeeminformatie met ons te delen. Dit gebeurt maar eenmaal, en we "
"zullen u niet nogmaals vragen om dit te doen (tenzij u upgrade naar een "
"volgende versie)."

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""
"Als we uw hardware, besturingssysteem, etc. kennen, zal dit ons erg helpen "
"bij de ontwikkeling en prioritering, omdat we dan beter weten waar de focus "
"ligt, en efficiënter de tijd besteden op delen die veel tijd kosten."

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:594
msgid "Is it safe?"
msgstr "Is het veilig?"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:596
#, boost-format
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""
"We sturen geen persoonlijke informatie of andere dingen die ons in staat "
"stellen uw identiteit vast te leggen. Om duplicaten te detecteren, wordt een "
"uniek nummer uit uw systeem gehaald, maar de inhoud daarvan kan niet worden "
"bekeken. Daarnaast, alleen algemene informatie over uw besturingssysteem, "
"hardware en OpenGL-installatie worden gestuurd. PrusaSlicer is open-source, "
"wat inhoudt dat u de broncode kunt bekijken om uzelf ervan te verzekeren hoe "
"de communicatie is. Zie %1%."

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:620
msgid "Show verbatim data that will be sent"
msgstr "Toon de data die zal worden gestuurd"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:622
msgid "Ask me next time"
msgstr "Vraag me volgende keer"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:623
msgid "Do not send anything"
msgstr "Stuur niets"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:709
msgid "System info sent successfully. Thank you."
msgstr "Systeeminfo succesvol verzonden. Hartelijk dank."

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:712
msgid "Sending system info failed!"
msgstr "Systeeminfo verzenden mislukt!"

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:719
msgid "Sending system info was cancelled."
msgstr "Systeeminfo verzenden is geannuleerd."

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:726
msgid "Sending system info..."
msgstr "Systeeminfo sturen..."

#: src/slic3r/GUI/SysInfoDialog.cpp:92
msgid "System Information"
msgstr "Systeeminformatie"

#: src/slic3r/GUI/SysInfoDialog.cpp:160
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr "Zwarte-lijstlibrary's geladen in het PrusaSlicer proces:"

#: src/slic3r/GUI/SysInfoDialog.cpp:172
msgid "Eigen vectorization supported:"
msgstr "Eigen-vectorisatie ondersteund:"

#: src/slic3r/GUI/SysInfoDialog.cpp:179
msgid "Copy to Clipboard"
msgstr "Kopieer van klembord"

#: src/slic3r/GUI/Tab.cpp:69 src/libslic3r/PrintConfig.cpp:666
msgid "Compatible printers"
msgstr "Compatibele printers"

#: src/slic3r/GUI/Tab.cpp:70
msgid "Select the printers this profile is compatible with."
msgstr "Selecteer de printers die compatibel zijn met dit profiel."

#: src/slic3r/GUI/Tab.cpp:75 src/libslic3r/PrintConfig.cpp:681
msgid "Compatible print profiles"
msgstr "Compatibele printprofielen"

#: src/slic3r/GUI/Tab.cpp:76
msgid "Select the print profiles this profile is compatible with."
msgstr "Selecteer de printprofielen die compatibel zijn met dit profiel."

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/Tab.cpp:167
msgid "Compare preset with another"
msgstr ""

#. TRN Settings Tab: tooltip for toolbar button
#: src/slic3r/GUI/Tab.cpp:174
msgid "Delete preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:178
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"Beweeg de cursor over de knoppen voor meer informatie\n"
"of klik op deze knop."

#: src/slic3r/GUI/Tab.cpp:182
#, boost-format
msgid "Search in settings [%1%]"
msgstr "Zoek in instellingen [%1%]"

#: src/slic3r/GUI/Tab.cpp:1250
msgid "Detach from system preset"
msgstr "Ontkoppel van systeempreset"

#: src/slic3r/GUI/Tab.cpp:1263
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""
"Een kopie van de huidige systeempreset wordt aangemaakt. Deze wordt "
"ontkoppeld van het origineel."

#: src/slic3r/GUI/Tab.cpp:1264
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr "De huidige custom preset wordt ontkoppeld van de originele preset."

#: src/slic3r/GUI/Tab.cpp:1267
msgid "Modifications to the current profile will be saved."
msgstr "Aanpassingen aan het huidige profiel worden opgeslagen."

#: src/slic3r/GUI/Tab.cpp:1273
msgid "Detach preset"
msgstr "Ontkoppel preset"

#: src/slic3r/GUI/Tab.cpp:1299
msgid "This is a default preset."
msgstr "Dit is een standaard preset."

#: src/slic3r/GUI/Tab.cpp:1301
msgid "This is a system preset."
msgstr "Dit is een systeempreset."

#: src/slic3r/GUI/Tab.cpp:1303
msgid "Current preset is inherited from the default preset."
msgstr "Huidige preset is gebaseerd op de standaard preset."

#: src/slic3r/GUI/Tab.cpp:1307
msgid "Current preset is inherited from"
msgstr "Huidige preset is afgeleid van"

#: src/slic3r/GUI/Tab.cpp:1311
msgid "It can't be deleted or modified."
msgstr "Kan niet verwijderd of aangepast worden."

#: src/slic3r/GUI/Tab.cpp:1312
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""
"Eventuele wijzigingen moet worden opgeslagen als een nieuwe preset die is "
"gebaseerd op de huidige."

#: src/slic3r/GUI/Tab.cpp:1313
msgid "To do that please specify a new name for the preset."
msgstr "Geef daarvoor een nieuwe naam aan de preset."

#: src/slic3r/GUI/Tab.cpp:1317
msgid "Additional information:"
msgstr "Overige informatie:"

#: src/slic3r/GUI/Tab.cpp:1323
msgid "printer model"
msgstr "printermodel"

#: src/slic3r/GUI/Tab.cpp:1331
msgid "default print profile"
msgstr "standaard printprofiel"

#: src/slic3r/GUI/Tab.cpp:1334
msgid "default filament profile"
msgstr "standaard filamentprofiel"

#: src/slic3r/GUI/Tab.cpp:1348
msgid "default SLA material profile"
msgstr "standaard SLA-materiaalprofiel"

#: src/slic3r/GUI/Tab.cpp:1352
msgid "default SLA print profile"
msgstr "standaard SLA-printprofiel"

#: src/slic3r/GUI/Tab.cpp:1360
msgid "full profile name"
msgstr "volledige profielnaam"

#: src/slic3r/GUI/Tab.cpp:1361
msgid "symbolic profile name"
msgstr "symbolische profielnaam"

#: src/slic3r/GUI/Tab.cpp:1399 src/slic3r/GUI/Tab.cpp:5144
msgid "Layers and perimeters"
msgstr "Lagen en perimeters"

#: src/slic3r/GUI/Tab.cpp:1405
msgid "Vertical shells"
msgstr "Verticale shells"

#: src/slic3r/GUI/Tab.cpp:1417
msgid "Horizontal shells"
msgstr "Horizontale shells"

#: src/slic3r/GUI/Tab.cpp:1418 src/libslic3r/PrintConfig.cpp:2457
msgid "Solid layers"
msgstr "Dichte lagen"

#: src/slic3r/GUI/Tab.cpp:1423
msgid "Minimum shell thickness"
msgstr "Minimale shelldikte"

#: src/slic3r/GUI/Tab.cpp:1434
msgid "Quality (slower slicing)"
msgstr "Kwaliteit (slicen kan langer duren)"

#: src/slic3r/GUI/Tab.cpp:1451
msgid "Fuzzy skin (experimental)"
msgstr "Oneffen oppervlak (experimenteel)"

#: src/slic3r/GUI/Tab.cpp:1474
msgid "Reducing printing time"
msgstr "Printtijd verkorten"

#: src/slic3r/GUI/Tab.cpp:1489 src/libslic3r/ExtrusionRole.cpp:77
msgid "Skirt"
msgstr "Skirt"

#: src/slic3r/GUI/Tab.cpp:1511
msgid "Raft"
msgstr "Raft"

#: src/slic3r/GUI/Tab.cpp:1516
msgid "Options for support material and raft"
msgstr "Opties voor support en raft"

#: src/slic3r/GUI/Tab.cpp:1535
msgid "Organic supports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1546
msgid "Speed for print moves"
msgstr "Snelheid voor printbewegingen"

#: src/slic3r/GUI/Tab.cpp:1559
msgid "Dynamic overhang speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1566
msgid "Speed for non-print moves"
msgstr "Snelheid voor niet-print bewegingen"

#: src/slic3r/GUI/Tab.cpp:1570
msgid "Modifiers"
msgstr "Modificators"

#: src/slic3r/GUI/Tab.cpp:1574
msgid "Acceleration control (advanced)"
msgstr "Acceleraties (geavanceerd)"

#: src/slic3r/GUI/Tab.cpp:1586
msgid "Autospeed (advanced)"
msgstr "Automatische snelheid (geavanceerd)"

#: src/slic3r/GUI/Tab.cpp:1590
msgid "Pressure equalizer (experimental)"
msgstr "Drukverdeler (experimenteel)"

#: src/slic3r/GUI/Tab.cpp:1594
msgid "Multiple Extruders"
msgstr "Meerdere extruders"

#: src/slic3r/GUI/Tab.cpp:1602
msgid "Ooze prevention"
msgstr "Druippreventie"

#: src/slic3r/GUI/Tab.cpp:1606 src/libslic3r/ExtrusionRole.cpp:50
#: src/libslic3r/ExtrusionRole.cpp:83
msgid "Wipe tower"
msgstr "Afveegblok"

#: src/slic3r/GUI/Tab.cpp:1624
msgid "Extrusion width"
msgstr "Extrusiebreedte"

#: src/slic3r/GUI/Tab.cpp:1634
msgid "Overlap"
msgstr "Overlapping"

#: src/slic3r/GUI/Tab.cpp:1637
msgid "Flow"
msgstr "Stroom"

#: src/slic3r/GUI/Tab.cpp:1648
msgid "Arachne perimeter generator"
msgstr "Arachne-perimetergeneratie"

#: src/slic3r/GUI/Tab.cpp:1656 src/slic3r/GUI/Tab.cpp:5193
msgid "Output options"
msgstr "Output-opties"

#: src/slic3r/GUI/Tab.cpp:1657
msgid "Sequential printing"
msgstr "Achtereenvolgens printen"

#: src/slic3r/GUI/Tab.cpp:1659
msgid "Extruder clearance"
msgstr "Extruderruimte"

#: src/slic3r/GUI/Tab.cpp:1664 src/slic3r/GUI/Tab.cpp:5194
msgid "Output file"
msgstr "Outputbestand"

#: src/slic3r/GUI/Tab.cpp:1683 src/libslic3r/PrintConfig.cpp:2080
msgid "Post-processing scripts"
msgstr "Scripts voor nabewerking"

#: src/slic3r/GUI/Tab.cpp:1695 src/slic3r/GUI/Tab.cpp:1696
#: src/slic3r/GUI/Tab.cpp:2148 src/slic3r/GUI/Tab.cpp:2149
#: src/slic3r/GUI/Tab.cpp:2636 src/slic3r/GUI/Tab.cpp:2637
#: src/slic3r/GUI/Tab.cpp:2714 src/slic3r/GUI/Tab.cpp:2715
#: src/slic3r/GUI/Tab.cpp:4369 src/slic3r/GUI/Tab.cpp:5026
#: src/slic3r/GUI/Tab.cpp:5027
msgid "Notes"
msgstr "Opmerkingen"

#: src/slic3r/GUI/Tab.cpp:1702 src/slic3r/GUI/Tab.cpp:2156
#: src/slic3r/GUI/Tab.cpp:2643 src/slic3r/GUI/Tab.cpp:2721
#: src/slic3r/GUI/Tab.cpp:5034 src/slic3r/GUI/Tab.cpp:5199
msgid "Dependencies"
msgstr "Afhankelijkheden"

#: src/slic3r/GUI/Tab.cpp:1703 src/slic3r/GUI/Tab.cpp:2157
#: src/slic3r/GUI/Tab.cpp:2644 src/slic3r/GUI/Tab.cpp:2722
#: src/slic3r/GUI/Tab.cpp:5035 src/slic3r/GUI/Tab.cpp:5200
msgid "Profile dependencies"
msgstr "Profielafhankelijkheden"

#: src/slic3r/GUI/Tab.cpp:1735
msgid "Post processing scripts shall modify G-code file in place."
msgstr "Nabewerkscripts zullen de G-code wijzigen."

#: src/slic3r/GUI/Tab.cpp:1814
#, c-format, boost-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""
"De volgende regel %s bevat gereserveerde sleutelwoorden.\n"
"Verwijder deze alstublieft; dit kan problemen veroorzaken in de visualisatie "
"en printtijdschattingen."
msgstr[1] ""
"De volgende regels %s bevatten gereserveerde sleutelwoorden.\n"
"Verwijder deze alstublieft; dit kan problemen veroorzaken in de visualisatie "
"en printtijdschattingen."

#: src/slic3r/GUI/Tab.cpp:1819
msgid "Found reserved keywords in"
msgstr "Gereserveerde sleutelwoorden gevonden in"

#: src/slic3r/GUI/Tab.cpp:1881
msgid "Filament Overrides"
msgstr "Overschrijven door filament"

#: src/slic3r/GUI/Tab.cpp:1882 src/slic3r/GUI/Tab.cpp:3016
msgid "Retraction"
msgstr "Retractie"

#: src/slic3r/GUI/Tab.cpp:2019
msgid "Temperature"
msgstr "Temperatuur"

#: src/slic3r/GUI/Tab.cpp:2023
msgid "Nozzle"
msgstr "Nozzle"

#: src/slic3r/GUI/Tab.cpp:2028
msgid "Bed"
msgstr "Bed"

#: src/slic3r/GUI/Tab.cpp:2033
msgid "Cooling"
msgstr "Koeling"

#: src/slic3r/GUI/Tab.cpp:2035 src/libslic3r/PrintConfig.cpp:1975
#: src/libslic3r/PrintConfig.cpp:3137
msgid "Enable"
msgstr "Toestaan"

#: src/slic3r/GUI/Tab.cpp:2046
msgid "Fan settings"
msgstr "Ventilatorinstellingen"

#: src/slic3r/GUI/Tab.cpp:2047
msgid "Fan speed"
msgstr "Ventilatorsnelheid"

#: src/slic3r/GUI/Tab.cpp:2057
msgid "Dynamic fan speeds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2064
msgid "Cooling thresholds"
msgstr "Koeldrempels"

#: src/slic3r/GUI/Tab.cpp:2070
msgid "Filament properties"
msgstr "Filamenteigenschappen"

#: src/slic3r/GUI/Tab.cpp:2077
msgid "Print speed override"
msgstr "Printsnelheid overschrijven"

#: src/slic3r/GUI/Tab.cpp:2087
msgid "Wipe tower parameters"
msgstr "Afveegblokparameters"

#: src/slic3r/GUI/Tab.cpp:2090
msgid "Toolchange parameters with single extruder MM printers"
msgstr "Toolwisselparameter voor multi-materialprinters met één extruder"

#: src/slic3r/GUI/Tab.cpp:2103
msgid "Ramming settings"
msgstr "Ramming-instellingen"

#: src/slic3r/GUI/Tab.cpp:2127 src/slic3r/GUI/Tab.cpp:2545
#: src/slic3r/GUI/Tab.cpp:4680 src/libslic3r/GCode.cpp:792
#: src/libslic3r/PrintConfig.cpp:2552
msgid "Custom G-code"
msgstr "Custom G-code"

#: src/slic3r/GUI/Tab.cpp:2128 src/slic3r/GUI/Tab.cpp:2546
#: src/libslic3r/GCode.cpp:766 src/libslic3r/PrintConfig.cpp:2507
#: src/libslic3r/PrintConfig.cpp:2517
msgid "Start G-code"
msgstr "Start G-code"

#: src/slic3r/GUI/Tab.cpp:2138 src/slic3r/GUI/Tab.cpp:2559
#: src/libslic3r/GCode.cpp:767 src/libslic3r/PrintConfig.cpp:786
#: src/libslic3r/PrintConfig.cpp:796
msgid "End G-code"
msgstr "Eind G-code"

#: src/slic3r/GUI/Tab.cpp:2183
msgid "Volumetric flow hints not available"
msgstr "Volumetrische stroom - opmerkingen niet beschikbaar"

#: src/slic3r/GUI/Tab.cpp:2347
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""
"Let op dat alle parameters van deze groep zijn verplaatst naar de fysieke-"
"printerinstellingen (zie wijzigingslogboek).\n"
"\n"
"Een nieuw fysieke printerprofiel wordt aangemaakt door te klikken op het "
"tandwiel-icoon, rechts van het printerprofiel-selectievak, en \"Fysieke "
"printer toevoegen\" te selecteren. Het fysieke printerprofiel bewerker opent "
"ook als slechts geklikt wordt op het tandwiel-icoon in de "
"printerinstellingentab. Het fysieke printerprofiel is opgeslagen in de "
"locatie PrusaSlicer/physical_printer."

#: src/slic3r/GUI/Tab.cpp:2366
msgid ""
"Emitting machine limits to G-code is not supported with Klipper G-code "
"flavor.\n"
"The option was switched to \"Use for time estimate\"."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2387 src/slic3r/GUI/Tab.cpp:2656
msgid "Size and coordinates"
msgstr "Grootte en coördinaten"

#: src/slic3r/GUI/Tab.cpp:2396 src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
msgid "Capabilities"
msgstr "Mogelijkheden"

#: src/slic3r/GUI/Tab.cpp:2401
msgid "Number of extruders of the printer."
msgstr "Aantal extruders van de printer."

#: src/slic3r/GUI/Tab.cpp:2434
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""
"Multi-material met één extruder is geselecteerd.\n"
"Alle extruders moeten daarvoor dezelfde diameter hebben.\n"
"Wilt u de diameters voor alle extruders aanpassen gelijk aan die van de "
"eerste extruder?"

#: src/slic3r/GUI/Tab.cpp:2437 src/slic3r/GUI/Tab.cpp:2894
#: src/libslic3r/PrintConfig.cpp:1943
msgid "Nozzle diameter"
msgstr "Nozzlediameter"

#: src/slic3r/GUI/Tab.cpp:2519
msgid ""
"The selected G-code flavor does not support the machine limitation for "
"Stealth mode.\n"
"Stealth mode will not be applied and will be disabled."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2527
msgid "G-code flavor is switched"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2556
msgid "Start G-Code options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2569 src/libslic3r/GCode.cpp:768
#: src/libslic3r/PrintConfig.cpp:442
msgid "Before layer change G-code"
msgstr "G-code die komt vóór de laagwisseling"

#: src/slic3r/GUI/Tab.cpp:2579 src/libslic3r/GCode.cpp:769
#: src/libslic3r/PrintConfig.cpp:1672
msgid "After layer change G-code"
msgstr "G-code die komt na de laagwisseling"

#: src/slic3r/GUI/Tab.cpp:2589 src/libslic3r/GCode.cpp:770
#: src/libslic3r/PrintConfig.cpp:3021
msgid "Tool change G-code"
msgstr "Toolwisseling G-code"

#: src/slic3r/GUI/Tab.cpp:2599 src/libslic3r/GCode.cpp:771
msgid "Between objects G-code (for sequential printing)"
msgstr "G-code die komt tussen objecten (bij achtereenvolgens printen)"

#: src/slic3r/GUI/Tab.cpp:2609 src/libslic3r/GCode.cpp:772
msgid "Color Change G-code"
msgstr "Kleurwissel G-code"

#: src/slic3r/GUI/Tab.cpp:2618 src/libslic3r/GCode.cpp:773
#: src/libslic3r/PrintConfig.cpp:2543
msgid "Pause Print G-code"
msgstr "Pauzeer print G-code"

#: src/slic3r/GUI/Tab.cpp:2627 src/libslic3r/GCode.cpp:774
msgid "Template Custom G-code"
msgstr "Template custom G-code"

#: src/slic3r/GUI/Tab.cpp:2663
msgid "Display"
msgstr "Scherm"

#: src/slic3r/GUI/Tab.cpp:2678
msgid "Tilt"
msgstr "Draaiing"

#: src/slic3r/GUI/Tab.cpp:2679
msgid "Tilt time"
msgstr "Draaitijd"

#: src/slic3r/GUI/Tab.cpp:2686 src/slic3r/GUI/Tab.cpp:5016
msgid "Corrections"
msgstr "Correcties"

#: src/slic3r/GUI/Tab.cpp:2699 src/slic3r/GUI/Tab.cpp:5012
msgid "Exposure"
msgstr "Belichtingstijd"

#: src/slic3r/GUI/Tab.cpp:2706
msgid "Output"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2771 src/slic3r/GUI/Tab.cpp:3064
#: src/libslic3r/PrintConfig.cpp:1701 src/libslic3r/PrintConfig.cpp:1734
#: src/libslic3r/PrintConfig.cpp:1751 src/libslic3r/PrintConfig.cpp:1768
#: src/libslic3r/PrintConfig.cpp:1784 src/libslic3r/PrintConfig.cpp:1794
#: src/libslic3r/PrintConfig.cpp:1804 src/libslic3r/PrintConfig.cpp:1815
#: src/libslic3r/PrintConfig.cpp:1826
msgid "Machine limits"
msgstr "Machinelimieten"

#: src/slic3r/GUI/Tab.cpp:2815
msgid "Values in this column are for Normal mode"
msgstr "Waarden in deze kolom zijn voor de normale modus"

#: src/slic3r/GUI/Tab.cpp:2821
msgid "Values in this column are for Stealth mode"
msgstr "Waarden in deze kolom zijn voor de stille modus"

#: src/slic3r/GUI/Tab.cpp:2830
msgid "Maximum feedrates"
msgstr "Maximale snelheden"

#: src/slic3r/GUI/Tab.cpp:2835
msgid "Maximum accelerations"
msgstr "Maximale acceleraties"

#: src/slic3r/GUI/Tab.cpp:2844
msgid "Jerk limits"
msgstr "Ruklimieten"

#: src/slic3r/GUI/Tab.cpp:2850
msgid "Minimum feedrates"
msgstr "Minimale snelheden"

#: src/slic3r/GUI/Tab.cpp:2891
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""
"Dit is een multi-materialprinter met één extruder. De diameters van alle "
"extruders worden ingesteld op de nieuwe waarde. Weet u zeker dat u wilt "
"doorgaan?"

#: src/slic3r/GUI/Tab.cpp:2928
msgid "Reset to Filament Color"
msgstr "Reset naar filamentkleur"

#: src/slic3r/GUI/Tab.cpp:2964
msgid "Apply below setting to other extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3009
msgid "Layer height limits"
msgstr "Laagdiktelimieten"

#: src/slic3r/GUI/Tab.cpp:3013
msgid "Position (for multi-extruder printers)"
msgstr "Positie (voor multi-extruderprinters)"

#: src/slic3r/GUI/Tab.cpp:3019
msgid "Only lift Z"
msgstr "Beweeg alleen omhoog"

#: src/slic3r/GUI/Tab.cpp:3032
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""
"Retractie als de tool uit staat (geavanceerde instelling voor multi-"
"extrudersetups)"

#: src/slic3r/GUI/Tab.cpp:3089 src/slic3r/GUI/Tab.cpp:3098
msgid "Single extruder MM setup"
msgstr "Multi-materialsetup met één extruder"

#: src/slic3r/GUI/Tab.cpp:3099
msgid "Single extruder multimaterial parameters"
msgstr "Parameter voor multi-material met één extruder"

#: src/slic3r/GUI/Tab.cpp:3264
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"De afveegoptie is niet beschikbaar als firmwareretractie aanstaat.\n"
"\n"
"Moet deze uitgezet worden om firmwareretractie te gebruiken?"

#: src/slic3r/GUI/Tab.cpp:3266
msgid "Firmware Retraction"
msgstr "Firmware-retractie"

#: src/slic3r/GUI/Tab.cpp:3575
msgid "New printer preset selected"
msgstr "Nieuwe printerpreset geselecteerd"

#: src/slic3r/GUI/Tab.cpp:3948
msgid "Detached"
msgstr "Ontkoppeld"

#: src/slic3r/GUI/Tab.cpp:4044
msgid ""
"The physical printer below is based on the preset, you are going to rename."
msgid_plural ""
"The physical printers below are based on the preset, you are going to rename."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:4049
msgid "Note, that the selected preset will be renamed in this printer too."
msgid_plural ""
"Note, that the selected preset will be renamed in these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:4111
msgid "remove"
msgstr "verwijder"

#: src/slic3r/GUI/Tab.cpp:4111
msgid "delete"
msgstr "verwijderen"

#: src/slic3r/GUI/Tab.cpp:4119
msgid "It's a last preset for this physical printer."
msgstr "Het is een laatste preset voor deze fysieke printer."

#: src/slic3r/GUI/Tab.cpp:4124
#, boost-format
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""
"Weet je zeker dat je \"%1%\" wilt verwijderen van de fysieke printer \"%2%\"?"

#: src/slic3r/GUI/Tab.cpp:4136
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""
"De onderstaande fysieke printer is gebaseerd op de preset die u wilt "
"verwijderen."
msgstr[1] ""
"De onderstaande fysieke printers zijn gebaseerd op de preset die u wilt "
"verwijderen."

#: src/slic3r/GUI/Tab.cpp:4141
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] ""
"Let op dat de geselecteerde preset ook voor deze printer wordt verwijderd."
msgstr[1] ""
"Let op dat de geselecteerde preset ook voor deze printers wordt verwijderd."

#: src/slic3r/GUI/Tab.cpp:4146
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""
"De onderstaande fysieke printer is alleen gebaseerd op de preset die u wilt "
"verwijderen."
msgstr[1] ""
"De onderstaande fysieke printers zijn alleen gebaseerd op de preset die u "
"wilt verwijderen."

#: src/slic3r/GUI/Tab.cpp:4151
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] ""
"Let op dat deze printer wordt verwijderd na het verwijderen van de "
"geselecteerde preset."
msgstr[1] ""
"Let op dat deze printers worden verwijderd na het verwijderen van de "
"geselecteerde preset."

#. TRN "remove/delete"
#: src/slic3r/GUI/Tab.cpp:4157
#, boost-format
msgid "Are you sure you want to %1% the selected preset?"
msgstr "Weet u zeker dat u de geselecteerde preset %1% wilt?"

#. TRN Settings Tabs: Button in toolbar: "Remove/Delete"
#: src/slic3r/GUI/Tab.cpp:4162
#, boost-format
msgid "%1% Preset"
msgstr "Preset %1%"

#: src/slic3r/GUI/Tab.cpp:4248 src/slic3r/GUI/Tab.cpp:4610
msgid "Set"
msgstr "Stel in"

#: src/slic3r/GUI/Tab.cpp:4367
msgid "Find"
msgstr "Zoek"

#: src/slic3r/GUI/Tab.cpp:4368
msgid "Replace with"
msgstr "Vervang met"

#: src/slic3r/GUI/Tab.cpp:4457
msgid "Regular expression"
msgstr "Reguliere uitdrukking"

#: src/slic3r/GUI/Tab.cpp:4461
msgid "Case insensitive"
msgstr "Hoofdletterongevoelig"

#: src/slic3r/GUI/Tab.cpp:4465
msgid "Whole word"
msgstr "Geheel woord"

#: src/slic3r/GUI/Tab.cpp:4469
msgid "Match single line"
msgstr "Laat overeenkomen met enkele lijn"

#: src/slic3r/GUI/Tab.cpp:4572
msgid "Are you sure you want to delete all substitutions?"
msgstr "Weet je zeker dat je alle substituties wilt verwijderen?"

#: src/slic3r/GUI/Tab.cpp:4710
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""
"Machinelimieten worden opgenomen in de G-code en gebruikt voor de geschatte "
"printtijd."

#: src/slic3r/GUI/Tab.cpp:4713
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""
"Machinelimieten worden NIET opgenomen in de G-code, hoewel ze worden "
"gebruikt om de printtijd te schatten, waardoor ze niet nauwkeurig kunnen "
"zijn bij een printer met andere machinelimieten."

#: src/slic3r/GUI/Tab.cpp:4717
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""
"Machinelimieten zijn niet ingesteld, waardoor de geschatte printtijd niet "
"nauwkeurig is."

#: src/slic3r/GUI/Tab.cpp:4739
msgid "LOCKED LOCK"
msgstr "Vergrendeld"

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4741
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""
"geeft aan dat de instellingen gelijk zijn aan de systeemwaarden voor de "
"huidige optiegroep"

#: src/slic3r/GUI/Tab.cpp:4743
msgid "UNLOCKED LOCK"
msgstr "Ontgrendeld"

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4745
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""
"geeft aan dat sommige instellingen zijn veranderd en niet gelijk zijn aan de "
"standaardwaarde voor de huidige optiegroep.\n"
"Klik op het ontgrendeld-pictogram om de instelling te resetten naar de "
"systeemwaarden voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:4750
msgid "WHITE BULLET"
msgstr "Wit bolletje"

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:4752
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""
"de linkerknop geeft aan dat het niet een systeempreset is,\n"
"de rechterknop geeft aan of de instelling is gewijzigd."

#: src/slic3r/GUI/Tab.cpp:4755
msgid "BACK ARROW"
msgstr "Pijltje terug"

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:4757
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"geeft aan dat de instellingen zijn veranderd en niet gelijk zijn aan de "
"laatst opgeslagen preset voor de huidige optiegroep.\n"
"Klik op het pijltje-terug-pictogram om alle instellingen te resetten naar de "
"laatst opgeslagen preset voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:4767
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""
"Vergrendeld-pictogram geeft aan dat de instellingen gelijk zijn aan de "
"systeemwaarde van de huidige optiegroep"

#: src/slic3r/GUI/Tab.cpp:4769
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""
"Ontgrendeld-pictogram geeft aan dat sommige instellingen zijn veranderd en "
"niet gelijk zijn aan de systeemwaarde voor de huidige optiegroep.\n"
"Klik om alle instellingen voor de huidige optiegroep te resetten naar "
"systeemwaarden."

#: src/slic3r/GUI/Tab.cpp:4772
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr "Het witte bolletje geeft aan dat het geen systeempreset betreft."

#: src/slic3r/GUI/Tab.cpp:4775
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""
"Het witte bolletje geeft aan dat de instelling gelijk is aan de laatst "
"opgeslagen preset voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:4777
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"Het pijltje-terug-pictogram geeft aan dat de instellingen zijn gewijzigd en "
"niet gelijk zijn aan de laatst opgeslagen preset voor de huidige "
"optiegroep.\n"
"Klik om alle instellingen terug te zetten voor de huidige optiegroep naar de "
"laatst opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:4783
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""
"Vergrendeld-pictogram geeft aan dat de waarde gelijk is aan de systeemwaarde."

#: src/slic3r/GUI/Tab.cpp:4784
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""
"Ontgrendeld-pictogram geeft aan dat de waarde is veranderd en niet gelijk is "
"aan de systeemwaarde.\n"
"Klik om de huidige waarde te resetten naar de systeemwaarde."

#: src/slic3r/GUI/Tab.cpp:4790
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""
"Het witte bolletje geeft aan dat de waarde gelijk is aan de laatst "
"opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:4791
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"Het pijltje-terug-pictogram geeft aan dat de waarde is veranderd en niet "
"gelijk is aan de laatst opgeslagen preset.\n"
"Klik om de waarde te resetten naar de laatst opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:4968 src/slic3r/GUI/Tab.cpp:4970
msgid "Material"
msgstr "Materiaal"

#: src/slic3r/GUI/Tab.cpp:5055 src/slic3r/GUI/Tab.cpp:5056
msgid "Material printing profile"
msgstr "Materiaal-printprofiel"

#: src/slic3r/GUI/Tab.cpp:5105
msgid "Support head"
msgstr "Supportkop"

#: src/slic3r/GUI/Tab.cpp:5110
msgid "Support pillar"
msgstr "Supportpijler"

#: src/slic3r/GUI/Tab.cpp:5133
msgid "Connection of the support sticks and junctions"
msgstr "Verbindingen van de supporttakken en kruisingen"

#: src/slic3r/GUI/Tab.cpp:5157
msgid "Branching"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:5159
msgid "Automatic generation"
msgstr "Automatisch genereren"

#: src/slic3r/GUI/Tab.cpp:5227
#, boost-format
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""
"\"%1%\" is uitgeschakeld omdat \"%2%\" aanstaat in \"%3%\"-categorie.\n"
"Om \"%1%\" aan te zetten moet \"%2%\" uit staan"

#: src/slic3r/GUI/Tab.cpp:5229 src/libslic3r/PrintConfig.cpp:3571
msgid "Object elevation"
msgstr "Objectverhoging"

#: src/slic3r/GUI/Tab.cpp:5229 src/libslic3r/PrintConfig.cpp:4036
msgid "Pad around object"
msgstr "Basisplaat rondom object"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:147
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:156
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:165
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1110
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1125
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1140
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1155
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
msgid "Undef"
msgstr "Ongedefinieerd"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:792
msgid "Unsaved Changes"
msgstr "Onopgeslagen wijzigingen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:810
msgid "Switching Presets: Unsaved Changes"
msgstr "Wisselen van presets: niet-opgeslagen wijzigingen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:860
msgid "Original value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:861
msgid "Modified value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
msgid "New value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
msgid "Keep"
msgstr "Behoud"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1574
msgid "Transfer"
msgstr "Omzetten"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:901
msgid "Don't save"
msgstr "Niet opslaan"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:929
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"create new project"
msgstr ""
"U wordt niet gevraagd naar niet-opgeslagen wijzigingen in presets de "
"volgende keer als u een nieuw project aanmaakt"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:930
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"switch a preset"
msgstr ""
"U wordt niet gevraagd naar niet-opgeslagen wijzigingen in presets de "
"volgende keer als u wisselt van preset"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:931
msgid ""
"You will not be asked about the unsaved changes in presets the next time "
"you: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""
"U wordt niet gevraagd naar niet-opgeslagen wijzigingen in presets de "
"volgende keer als:\n"
"- PrusaSlicer afgesloten wordt terwijl sommige presets zijn aangepast;\n"
"- een nieuw project wordt geladen terwijl sommige presets zijn aangepast"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:934
msgid "PrusaSlicer will remember your action."
msgstr "PrusaSlicer onthoudt je keuze."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""
"Kijk naar \"Voorkeuren\" en check \"%1%\"\n"
"om weer te vragen over niet-opgeslagen wijzigingen."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:967
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1778
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""
"Sommige velden zijn te lang om te passen. Rechtermuisklik toont de volledige "
"tekst."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
msgid "All settings changes will not be saved"
msgstr "Alle gewijzigde instellingen worden niet opgeslagen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
msgid "All settings changes will be discarded."
msgstr "Gewijzigde instellingen worden niet opgeslagen."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:972
msgid "Save the selected options."
msgstr "Geselecteerde opties opslaan."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:973
msgid "Keep the selected settings."
msgstr "Behoud de geselecteerde instellingen."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:974
msgid "Transfer the selected settings to the newly selected preset."
msgstr "Ze de geselecteerde instelling om in de nieuw geselecteerde preset."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:978
#, boost-format
msgid "Save the selected options to preset \"%1%\"."
msgstr "Geselecteerde opties voor preset \"%1%\" opslaan."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:979
#, boost-format
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""
"Zet de geselecteerde optie om in de nieuw geselecteerde preset \"%1%\"."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1240
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] "De volgende preset is aangepast"
msgstr[1] "De volgende presets zijn aangepast"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1246
#, boost-format
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr "Preset \"%1%\" heeft de volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1250
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""
"Preset \"%1%\" is niet compatibel met het nieuwe printerprofiel en heeft de "
"volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1251
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""
"Preset \"%1%\" is niet compatibel met het nieuwe printprofiel en heeft de "
"volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1300
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1856
msgid "Extruders count"
msgstr "Aantal extruders"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1329
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] "De preset-aanpassing is succesvol opgeslagen"
msgstr[1] "De presets-aanpassing is succesvol opgeslagen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
msgid "Show all presets (including incompatible)"
msgstr "Toon alle presets (inclusief niet compatibele)"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1538
msgid "Select presets to compare"
msgstr "Selecteer presets om te vergelijken"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1550
msgid "Left Preset Value"
msgstr "Linker presetwaarde"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1551
msgid "Right Preset Value"
msgstr "Rechter presetwaarde"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1600
msgid ""
"Transfer the selected options from left preset to the right.\n"
"Note: New modified presets will be selected in settings tabs after close "
"this dialog."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1608
msgid "Save the selected options from left preset to the right."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
msgid "Transfer values from left to right"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1627
msgid ""
"If enabled, this dialog can be used for transver selected values from left "
"to right preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1813
msgid "One of the presets doesn't found"
msgstr "Een van de presets niet gevonden"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1824
msgid "Compared presets has different printer technology"
msgstr "Vergeleken presets hebben verschillende soorten printers"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1838
msgid "Presets are the same"
msgstr "Presets zijn gelijk"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1846
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""
"Presets verschillen.\n"
"Klik op deze knop om dezelfde preset te selecteren voor de rechter en linker "
"preset."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
msgid "Undef category"
msgstr "Ongedefinieerde categorie"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
msgid "Undef group"
msgstr "Ongedefinieerde groep"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2022
msgid "Modified"
msgstr "Gewijzigd"

#: src/slic3r/GUI/UpdateDialogs.cpp:41
msgid "Update available"
msgstr "Update beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:41
#, c-format, boost-format
msgid "New version of %s is available"
msgstr "Nieuwe versie van %s beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:46 src/slic3r/GUI/UpdateDialogs.cpp:101
msgid "Current version:"
msgstr "Huidige versie:"

#: src/slic3r/GUI/UpdateDialogs.cpp:48 src/slic3r/GUI/UpdateDialogs.cpp:103
msgid "New version:"
msgstr "Nieuwe versie:"

#: src/slic3r/GUI/UpdateDialogs.cpp:56
msgid "Changelog & Download"
msgstr "Wijzigingslogboek downloaden"

#: src/slic3r/GUI/UpdateDialogs.cpp:63 src/slic3r/GUI/UpdateDialogs.cpp:309
#: src/slic3r/GUI/UpdateDialogs.cpp:367
msgid "Open changelog page"
msgstr "Open wijzigingslogboekpagina"

#: src/slic3r/GUI/UpdateDialogs.cpp:69
msgid "Open download page"
msgstr "Open downloadpagina"

#: src/slic3r/GUI/UpdateDialogs.cpp:76 src/slic3r/GUI/UpdateDialogs.cpp:109
msgid "Don't notify about new releases any more"
msgstr "Geef geen meldingen over nieuwe versies meer"

#: src/slic3r/GUI/UpdateDialogs.cpp:98
msgid "App Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:98
#, c-format, boost-format
msgid ""
"New version of %s is available.\n"
"Do you wish to download it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
msgid "App Update download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:138
#, boost-format
msgid "New version of %1% is available."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:141
msgid "New version"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:146
msgid "Run installer after download. (Otherwise file explorer will be opened)"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
msgid "Target directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:158 src/slic3r/GUI/UpdateDialogs.cpp:176
msgid "Select directory"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:204
msgid "Directory path is empty."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:212
msgid "Directory path is incorrect."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:217
#, boost-format
msgid "Directory %1% doesn't exists. Do you wish to create it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:222
msgid "Failed to create directory."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:229
#, boost-format
msgid "File %1% already exists. Do you wish to overwrite it?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:234
#, boost-format
msgid "Download path is %1%. Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270
msgid "Opening Configuration Wizard"
msgstr "Configuratiewizard openen"

#: src/slic3r/GUI/UpdateDialogs.cpp:270 src/slic3r/GUI/UpdateDialogs.cpp:437
msgid "Configuration update"
msgstr "Configuratie-update"

#: src/slic3r/GUI/UpdateDialogs.cpp:271
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed."
msgstr ""
"PrusaSlicer gebruikt niet de nieuwst beschikbare configuratie.\n"
"De configuratiewizard toont niet de nieuwste printers, filamenten en SLA-"
"materialen om te installeren."

#: src/slic3r/GUI/UpdateDialogs.cpp:273
msgid "Configuration update is available"
msgstr "Configuratie-update is beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:276
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"Wilt u het installeren?\n"
"\n"
"Er wordt eerst een configuratiesnapshot gemaakt. Deze kan op elk moment "
"hersteld worden en zal geen probleem geven bij nieuwere versies.\n"
"\n"
"Geüpdatete configuratiebundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:297 src/slic3r/GUI/UpdateDialogs.cpp:357
msgid "Comment:"
msgstr "Opmerking:"

#: src/slic3r/GUI/UpdateDialogs.cpp:318
msgid "Install"
msgstr "Installeer"

#: src/slic3r/GUI/UpdateDialogs.cpp:320
msgid "Don't install"
msgstr "Niet installeren"

#: src/slic3r/GUI/UpdateDialogs.cpp:333 src/slic3r/GUI/UpdateDialogs.cpp:388
#, c-format, boost-format
msgid "%s incompatibility"
msgstr "%s incompatibiliteit"

#: src/slic3r/GUI/UpdateDialogs.cpp:333
msgid "You must install a configuration update."
msgstr "U moet een configuratie-update installeren."

#: src/slic3r/GUI/UpdateDialogs.cpp:336
#, c-format, boost-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"%s zal nu updates starten, anders is het niet mogelijk dit programma correct "
"te draaien.\n"
"\n"
"Vooraf wordt een volledige configuratiesnapshot gemaakt. Het kan dan altijd "
"hersteld worden, mochten de updates problemen geven met de nieuwe versie.\n"
"\n"
"Geüpdatete configuratiebundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:389
#, c-format, boost-format
msgid "%s configuration is incompatible"
msgstr "%s configuratie is niet compatibel"

#: src/slic3r/GUI/UpdateDialogs.cpp:392
#, c-format, boost-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""
"Deze versie van %s is niet compatibel voor de huidig geïnstalleerde "
"configuratiebundels.\n"
"Dit kan mogelijk ontstaan als resultaat van het draaien van een ouder %s na "
"het gebruik van een nieuwere.\n"
"\n"
"U kunt kiezen om %s af te sluiten en opnieuw te proberen met een nieuwere "
"versie of de startconfiguratie opnieuw te draaien. In geval van dat laatste "
"wordt een backup-snapshot gemaakt van de bestaande configuratie voor het "
"installeren van bestanden die geschikt zijn voor deze %s."

#: src/slic3r/GUI/UpdateDialogs.cpp:401
#, c-format, boost-format
msgid "This %s version: %s"
msgstr "Deze %s versie: %s"

#: src/slic3r/GUI/UpdateDialogs.cpp:406
msgid "Incompatible bundles:"
msgstr "Niet compatibele bundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:422
msgid "Re-configure"
msgstr "Herconfigureer"

#: src/slic3r/GUI/UpdateDialogs.cpp:440
#, c-format, boost-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"%s gebruikt nu een geüpdatete configuratiestructuur.\n"
"\n"
"Presets van het systeem zijn geïntroduceerd. Deze bevatten ingebouwde "
"standaardinstellingen voor meerdere printers. Deze systemen kunnen niet "
"aangepast worden. In plaats daarvan kunt u nu uw eigen presets creëren op "
"basis van een van de preset.\n"
"Een overgenomen preset kan een bepaalde waarde van bovenliggende "
"instellingen meekrijgen, maar ook overschrijven met een aangepaste waarde.\n"
"\n"
"Ga verdere met de %s die volgt om de nieuwe presets in te stellen en om te "
"kiezen of automatische presets moeten worden ingeschakeld."

#: src/slic3r/GUI/UpdateDialogs.cpp:455
msgid "For more information please visit our wiki page:"
msgstr "Voor meer informatie kunt u naar onze wiki-pagina gaan:"

#. TRN %s = PrusaSlicer
#: src/slic3r/GUI/UpdateDialogs.cpp:459
#, c-format, boost-format
msgid "%s 1.40 configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:473
msgid "Configuration updates"
msgstr "Configuratie-updates"

#: src/slic3r/GUI/UpdateDialogs.cpp:473 src/slic3r/GUI/UpdateDialogs.cpp:493
msgid "No updates available"
msgstr "Geen updates beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:478
#, c-format, boost-format
msgid "%s has no configuration updates available."
msgstr "%s heeft geen configuratie-updates beschikbaar."

#: src/slic3r/GUI/UpdateDialogs.cpp:493
msgid "App update"
msgstr ""

#. TRN %1% is PrusaSlicer
#: src/slic3r/GUI/UpdateDialogs.cpp:496
#, boost-format
msgid "Your %1% is up to date."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:23
msgid "Ramming customization"
msgstr "Ramming aanpassen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:56
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"Ramming wordt gebruikt voor het snel extruderen vlak voor een toolwisseling "
"bij multi-materialprinters met één extruder. Het doel daarvan is om het "
"einde van het ongeladen filament goed te vormen (zodat het later weer "
"geladen kan worden) en nieuw filament niet verhinderd wordt. Deze fase is "
"belangrijk. Verschillende materialen vereisen verschillende "
"extrusiesnelheden voor de juiste vorm. Daarom zijn de waarden tijdens de "
"ramming aan te passen.\n"
"\n"
"Dit is een expert-level instelling. Onjuiste aanpassingen kunnen zorgen voor "
"verstoppingen en andere problemen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:116
msgid "Total ramming time"
msgstr "Totale ramming-tijd"

#: src/slic3r/GUI/WipeTowerDialog.cpp:118
msgid "Total rammed volume"
msgstr "Totaal ramming-volume"

#: src/slic3r/GUI/WipeTowerDialog.cpp:122
msgid "Ramming line width"
msgstr "Lijnbreedte voor ramming"

#: src/slic3r/GUI/WipeTowerDialog.cpp:124
msgid "Ramming line spacing"
msgstr "Lijnafstand voor ramming"

#: src/slic3r/GUI/WipeTowerDialog.cpp:175
msgid "Wipe tower - Purging volume adjustment"
msgstr "Afveegblok - afveegvolume aanpassen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:301
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""
"Hier kunt u het benodigde afveegvolume (mm³) voor elk soort tool aanpassen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:302
msgid "Extruder changed to"
msgstr "Extruder veranderd naar"

#: src/slic3r/GUI/WipeTowerDialog.cpp:310
msgid "unloaded"
msgstr "ontladen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:311
msgid "loaded"
msgstr "geladen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:354
msgid "Tool #"
msgstr "Tool #"

#: src/slic3r/GUI/WipeTowerDialog.cpp:363
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""
"Totaal afveegvolume dat de som is van de twee onderstaande waarden, "
"afhankelijk van welke tools zijn geladen/ontladen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:364
msgid "Volume to purge (mm³) when the filament is being"
msgstr "Afveegvolume (mm³) als het filament wordt gebruikt"

#: src/slic3r/GUI/WipeTowerDialog.cpp:378
msgid "From"
msgstr "Van"

#: src/slic3r/GUI/WipeTowerDialog.cpp:444
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"Overschakelen naar eenvoudige modus zorgt dat de gewijzigde instellingen uit "
"de geavanceerde modus vervallen!\n"
"\n"
"Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show simplified settings"
msgstr "Toon eenvoudige instellingen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:456
msgid "Show advanced settings"
msgstr "Toon geavanceerde instellingen"

#: src/slic3r/GUI/wxExtensions.cpp:628
#, c-format, boost-format
msgid "Switch to the %s mode"
msgstr "Schakel over naar de %s modus"

#: src/slic3r/GUI/wxExtensions.cpp:629
#, c-format, boost-format
msgid "Current mode is %s"
msgstr "Huidige modus is: %s"

#: src/slic3r/GUI/wxExtensions.cpp:714
msgctxt "Mode"
msgid "Advanced"
msgstr "Geavanceerd"

#: src/slic3r/Utils/AstroBox.cpp:70 src/slic3r/Utils/OctoPrint.cpp:206
#: src/slic3r/Utils/OctoPrint.cpp:255 src/slic3r/Utils/OctoPrint.cpp:643
#: src/slic3r/Utils/OctoPrint.cpp:806 src/slic3r/Utils/OctoPrint.cpp:879
#: src/slic3r/Utils/Repetier.cpp:88
#, c-format, boost-format
msgid "Mismatched type of print host: %s"
msgstr "Onjuist type printhost: %s"

#: src/slic3r/Utils/AstroBox.cpp:85
msgid "Connection to AstroBox works correctly."
msgstr "Verbinding met AstroBox werkt naar behoren."

#: src/slic3r/Utils/AstroBox.cpp:91
msgid "Could not connect to AstroBox"
msgstr "Kan niet verbinden met AstroBox"

#: src/slic3r/Utils/AstroBox.cpp:93
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr "Let op: AstroBox-versie 1.1.0 is tenminste vereist."

#: src/slic3r/Utils/AppUpdater.cpp:42
#, boost-format
msgid ""
"Running downloaded instaler of %1% has failed:\n"
"%2%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:206
#, boost-format
msgid "Internal download error for url %1%:"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:207
msgid "Destination path is empty."
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:223
#, boost-format
msgid "Download from %1% couldn't start:"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:265
#, boost-format
msgid "Downloaded file has wrong size. Expected size: %1% Downloaded size: %2%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:280
#, boost-format
msgid ""
"Failed to write to file or to move %1% to %2%:\n"
"%3%"
msgstr ""

#: src/slic3r/Utils/AppUpdater.cpp:296
#, boost-format
msgid ""
"Downloading new %1% has failed:\n"
"%2%"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:48
msgid "Connection to Duet works correctly."
msgstr "Verbinding met Duet werkt naar behoren."

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr "Kan niet verbinden met Duet"

#: src/slic3r/Utils/Duet.cpp:87 src/slic3r/Utils/Duet.cpp:156
#: src/slic3r/Utils/FlashAir.cpp:123 src/slic3r/Utils/FlashAir.cpp:144
#: src/slic3r/Utils/FlashAir.cpp:160
msgid "Unknown error occured"
msgstr "Onbekende fout opgetreden"

#: src/slic3r/Utils/Duet.cpp:150
msgid "Wrong password"
msgstr "Verkeerd wachtwoord"

#: src/slic3r/Utils/Duet.cpp:153
msgid "Could not get resources to create a new connection"
msgstr "Kan geen middelen krijgen om nieuwe verbinding te maken"

#: src/slic3r/Utils/FixModelByWin10.cpp:221
#: src/slic3r/Utils/FixModelByWin10.cpp:361
msgid "Exporting source model"
msgstr "Exporteer bronmodel"

#: src/slic3r/Utils/FixModelByWin10.cpp:244
msgid "Repairing model by the Netfabb service"
msgstr "Repareer model met de NetFabb-service"

#: src/slic3r/Utils/FixModelByWin10.cpp:253
#: src/slic3r/Utils/FixModelByWin10.cpp:388
msgid "Loading repaired model"
msgstr "Gerepareerd model aan het laden"

#: src/slic3r/Utils/FixModelByWin10.cpp:412
msgid "Model repair finished"
msgstr "Model repareren voltooid"

#: src/slic3r/Utils/FixModelByWin10.cpp:418
msgid "Model repair canceled"
msgstr "Model repareren geannuleerd"

#: src/slic3r/Utils/FlashAir.cpp:59
msgid "Upload not enabled on FlashAir card."
msgstr "Uploaden naar een FlashAir-kaart niet toegestaan."

#: src/slic3r/Utils/FlashAir.cpp:69
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr "Verbinding met FlashAir werkt naar behoren en uploaden is toegestaan."

#: src/slic3r/Utils/FlashAir.cpp:75
msgid "Could not connect to FlashAir"
msgstr "Kan niet verbinden met FlashAir"

#: src/slic3r/Utils/FlashAir.cpp:77
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""
"Let op: FlashAir met firmware 2.00.02 (of nieuwer) en een geactiveerde "
"upload zijn vereist."

#: src/slic3r/Utils/OctoPrint.cpp:278
msgid "Connection to OctoPrint works correctly."
msgstr "Verbinding met OctoPrint werkt naar behoren."

#: src/slic3r/Utils/OctoPrint.cpp:284
msgid "Could not connect to OctoPrint"
msgstr "Kan niet verbinden met OctoPrint"

#: src/slic3r/Utils/OctoPrint.cpp:286
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "Let op: de minimaal vereiste versie van OctoPrint is 1.1.0."

#: src/slic3r/Utils/OctoPrint.cpp:525
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr "Verbinding met Prusa SL1 / SL1S werkt naar behoren."

#: src/slic3r/Utils/OctoPrint.cpp:530
msgid "Could not connect to Prusa SLA"
msgstr "Kan niet verbinden met Prusa SLA"

#: src/slic3r/Utils/OctoPrint.cpp:552
msgid "Connection to PrusaLink works correctly."
msgstr "Verbinding met PrusaLink werkt naar behoren."

#: src/slic3r/Utils/OctoPrint.cpp:557
msgid "Could not connect to PrusaLink"
msgstr "Kan niet verbinden met PrusaLink"

#: src/slic3r/Utils/OctoPrint.cpp:753
msgid "Storages found"
msgstr ""

#. TRN %1% = storage path
#: src/slic3r/Utils/OctoPrint.cpp:757
#, boost-format
msgid "%1% : read only"
msgstr ""

#. TRN %1% = storage path
#: src/slic3r/Utils/OctoPrint.cpp:759
#, boost-format
msgid "%1% : no free space"
msgstr ""

#. TRN %1% = host
#: src/slic3r/Utils/OctoPrint.cpp:763
#, boost-format
msgid "Upload has failed. There is no suitable storage found at %1%."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:1122
msgid "Connection to Prusa Connect works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:1127
msgid "Could not connect to Prusa Connect"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:64
#, boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr "Kopiëren van bestand %1% naar %2% mislukt: %3%"

#: src/slic3r/Utils/PresetUpdater.cpp:998
#: src/slic3r/Utils/PresetUpdater.cpp:1015
msgid "Continue and install configuration updates?"
msgstr "Doorgaan en configuratie-updates installeren?"

#: src/slic3r/Utils/PresetUpdater.cpp:1021
msgid "Installing profiles"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1071
#, boost-format
msgid "Downloading resources for %1%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1171
msgid ""
"Configuration Update will cause the preset modification to be lost.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1173
msgid "Updating"
msgstr "Updaten"

#: src/slic3r/Utils/PresetUpdater.cpp:1202
#, c-format, boost-format
msgid "requires min. %s and max. %s"
msgstr "vereist minimaal %s en maximaal %s"

#: src/slic3r/Utils/PresetUpdater.cpp:1206
#, c-format, boost-format
msgid "requires min. %s"
msgstr "vereist minimaal %s"

#: src/slic3r/Utils/PresetUpdater.cpp:1209
#, c-format, boost-format
msgid "requires max. %s"
msgstr "vereist maximaal %s"

#: src/slic3r/Utils/PresetUpdater.cpp:1334
#, boost-format
msgid ""
"Couldn't locate index file for vendor %1% when performing updates. The "
"profile will not be installed."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1344
#, boost-format
msgid ""
"Couldn't load index file for vendor %1% when performing updates. The profile "
"will not be installed. Reason: Corrupted index file %2%."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:1382
#, boost-format
msgid ""
"Couldn't open profile file for vendor %1% when performing updates. The "
"profile will not be installed. This installation might be corrupted."
msgstr ""

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""
"Kan geen systeem SSL certicate store detecteren. PrusaSlicer is niet in "
"staat om een veilige netwerkverbinding in te stellen."

#: src/slic3r/Utils/Http.cpp:78
#, boost-format
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""
"PrusaSlicer heeft een system SSL certificate store gedetecteerd in: %1%"

#: src/slic3r/Utils/Http.cpp:82
#, boost-format
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""
"Om het systeemcertificaat handmatig op te slaan, stel je de %1% "
"omgevingsvariabele in op de juiste CA bundel en start je het programma "
"opnieuw."

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""
"Initialisatie van CURL mislukt. PrusaSlicer is niet in staat een "
"netwerkverbinding in te stellen. Zie het wijzigingslogboek voor verdere "
"details."

#: src/slic3r/Utils/Process.cpp:164
msgid "Open G-code file:"
msgstr "Open .gcode-bestand:"

#: src/slic3r/Utils/Repetier.cpp:103
msgid "Connection to Repetier works correctly."
msgstr "Verbinding met Repetier werkt naar behoren."

#: src/slic3r/Utils/Repetier.cpp:109
msgid "Could not connect to Repetier"
msgstr "Kan niet verbinden met Repetier"

#: src/slic3r/Utils/Repetier.cpp:111
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr "Let op dat minimaal Repetier-versie 0.90.0 is vereist."

#: src/slic3r/Utils/Repetier.cpp:263
#, boost-format
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""
"HTTP-status: %1%\n"
"Bericht: \"%2%\""

#: src/slic3r/Utils/Repetier.cpp:270
#, boost-format
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""
"Verwerken van host respons mislukt.\n"
"Bericht: \"%1%\"\n"
"Fout: \"%2%\""

#: src/slic3r/Utils/Repetier.cpp:283
#, boost-format
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""
"Opsommen van hostprinters mislukt.\n"
"Bericht: \"%1%\"\n"
"Fout: \"%2%\""

#: src/slic3r/Config/Snapshot.cpp:584
msgid "Taking a configuration snapshot failed."
msgstr "Configuratiesnapshot nemen is mislukt."

#: src/slic3r/Config/Snapshot.cpp:598
msgid ""
"PrusaSlicer has encountered an error while taking a configuration snapshot."
msgstr ""
"PrusaSlicer heeft een fout opgelopen bij het maken van een "
"configuratiesnapshot."

#: src/slic3r/Config/Snapshot.cpp:599
msgid "PrusaSlicer error"
msgstr "PrusaSlicer-fout"

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Continue"
msgstr "Doorgaan"

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Abort"
msgstr "Stoppen"

#: src/libslic3r/GCode.cpp:598
msgid "There is an object with no extrusions in the first layer."
msgstr "Er is een object zonder extrusie op de eerste laag."

#: src/libslic3r/GCode.cpp:629
#, boost-format
msgid "Empty layer between %1% and %2%."
msgstr "Lege lagen tussen %1% en %2%."

#: src/libslic3r/GCode.cpp:632
msgid "(Some lines not shown)"
msgstr "(Sommige lijnen niet getoond)"

#: src/libslic3r/GCode.cpp:634
#, boost-format
msgid "Object name: %1%"
msgstr "Objectnaam: %1%"

#: src/libslic3r/GCode.cpp:635
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""
"Let er op dat het object printbaar is. Dit wordt meestal veroorzaakt door te "
"kleine extrusies of een corrupt model. Probeer het model te repareren of "
"verander de oriëntatie op het bed."

#: src/libslic3r/GCode.cpp:777
msgid "Filament Start G-code"
msgstr "Filament start-G-code"

#: src/libslic3r/GCode.cpp:784
msgid "Filament End G-code"
msgstr "Filament eind-G-code"

#: src/libslic3r/GCode.cpp:825
msgid "In the custom G-code were found reserved keywords:"
msgstr "In de custom G-code zijn gereserveerde sleutelwoorden gevonden:"

#: src/libslic3r/GCode.cpp:827
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr ""
"Dit kan problemen veroorzaken in de visualisatie en printtijdschattingen."

#: src/libslic3r/GCode.cpp:1222 src/libslic3r/GCode.cpp:1233
msgid "No extrusions were generated for objects."
msgstr "Geen extrusies werden gegenereerd voor de objecten."

#: src/libslic3r/GCode.cpp:1425
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""
"Uw print is dichtbij de afveeggebieden. Let op dat dit geen botsingen "
"veroorzaakt."

#: src/libslic3r/ExtrusionRole.cpp:38 src/libslic3r/ExtrusionRole.cpp:59
msgid "Perimeter"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:39 src/libslic3r/ExtrusionRole.cpp:61
msgid "External perimeter"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:40 src/libslic3r/ExtrusionRole.cpp:63
msgid "Overhang perimeter"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:41 src/libslic3r/ExtrusionRole.cpp:65
msgid "Internal infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:42 src/libslic3r/ExtrusionRole.cpp:67
#: src/libslic3r/PrintConfig.cpp:1452 src/libslic3r/PrintConfig.cpp:2432
#: src/libslic3r/PrintConfig.cpp:2444
msgid "Solid infill"
msgstr "Dichte vulling"

#: src/libslic3r/ExtrusionRole.cpp:43 src/libslic3r/ExtrusionRole.cpp:69
#: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:3033
#: src/libslic3r/PrintConfig.cpp:3046
msgid "Top solid infill"
msgstr "Bovenste dichte vulling"

#: src/libslic3r/ExtrusionRole.cpp:45 src/libslic3r/ExtrusionRole.cpp:73
msgid "Bridge infill"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:46 src/libslic3r/ExtrusionRole.cpp:75
#: src/libslic3r/PrintConfig.cpp:1380
msgid "Gap fill"
msgstr "Gatenvulling"

#: src/libslic3r/ExtrusionRole.cpp:47 src/libslic3r/ExtrusionRole.cpp:77
msgid "Skirt/Brim"
msgstr ""

#: src/libslic3r/ExtrusionRole.cpp:49 src/libslic3r/ExtrusionRole.cpp:81
#: src/libslic3r/PrintConfig.cpp:2781
msgid "Support material interface"
msgstr "Supportinterface"

#: src/libslic3r/Flow.cpp:58
#, boost-format
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""
"Kan de extrusiebreedte niet berekenen voor %1%: Variabele '%2%' niet "
"beschikbaar."

#: src/libslic3r/Format/3mf.cpp:1878
#, boost-format
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""
"Het geselecteerde .3MF-bestand is opgeslagen in een nieuwere versie van %1% "
"en is niet compatibel."

#: src/libslic3r/Format/3mf.cpp:1889
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""
"De geselecteerde 3MF bevat een FDM-supports geschilderd object van een "
"nieuwere versie van PrusaSlicer en is niet compatibel."

#: src/libslic3r/Format/3mf.cpp:1893
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr ""
"De geselecteerde 3MF bevat een naadschildering object van een nieuwere "
"versie van PrusaSlicer en is niet compatibel."

#: src/libslic3r/Format/3mf.cpp:1897
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr ""
"De geselecteerde 3MF bevat een multi-material geschilderd object van een "
"nieuwere versie van PrusaSlicer en is niet compatibel."

#: src/libslic3r/Format/AMF.cpp:996
#, boost-format
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""
"Het geselecteerde .AMF-bestand is opgeslagen in een nieuwere versie van %1% "
"en is niet compatibel."

#: src/libslic3r/GCode/PostProcessor.cpp:284
#, boost-format
msgid ""
"Post-processing script %1% failed.\n"
"\n"
"The post-processing script is expected to change the G-code file %2% in "
"place, but the G-code file was deleted and likely saved under a new name.\n"
"Please adjust the post-processing script to change the G-code in place and "
"consult the manual on how to optionally rename the post-processed G-code "
"file.\n"
msgstr ""
"Nabewerkscript %1% gaf een fout.\n"
"\n"
"Het nabewerkscript zou de het .gcode-bestand %2% moeten aanpassen, maar het "
"bestand is verwijderd en waarschijnlijk opgeslagen onder een andere naam.\n"
"Pas alstublieft het nabewerkscript aan om de G-code aan te passen en "
"raadpleeg de handleiding over de benoeming van het nabewerkte .gcode-"
"bestand.\n"

#: src/libslic3r/miniz_extension.cpp:87
msgid "undefined error"
msgstr "onbekende fout"

#: src/libslic3r/miniz_extension.cpp:89
msgid "too many files"
msgstr "te veel bestanden"

#: src/libslic3r/miniz_extension.cpp:91
msgid "file too large"
msgstr "bestand te groot"

#: src/libslic3r/miniz_extension.cpp:93
msgid "unsupported method"
msgstr "niet-ondersteunde methode"

#: src/libslic3r/miniz_extension.cpp:95
msgid "unsupported encryption"
msgstr "niet-ondersteunde encryptie"

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported feature"
msgstr "niet-ondersteunde optie"

#: src/libslic3r/miniz_extension.cpp:99
msgid "failed finding central directory"
msgstr "centrale map niet gevonden"

#: src/libslic3r/miniz_extension.cpp:101
msgid "not a ZIP archive"
msgstr "geen ZIP-archief"

#: src/libslic3r/miniz_extension.cpp:103
msgid "invalid header or archive is corrupted"
msgstr "ongeldige koptekst of het archief is beschadigd"

#: src/libslic3r/miniz_extension.cpp:105
msgid "unsupported multidisk archive"
msgstr "niet-ondersteund multi-disk archief"

#: src/libslic3r/miniz_extension.cpp:107
msgid "decompression failed or archive is corrupted"
msgstr "decompressie mislukt of archief is beschadigd"

#: src/libslic3r/miniz_extension.cpp:109
msgid "compression failed"
msgstr "compressie mislukt"

#: src/libslic3r/miniz_extension.cpp:111
msgid "unexpected decompressed size"
msgstr "onverwachte gedecomprimeerde grootte"

#: src/libslic3r/miniz_extension.cpp:113
msgid "CRC-32 check failed"
msgstr "CRC-32 check mislukt"

#: src/libslic3r/miniz_extension.cpp:115
msgid "unsupported central directory size"
msgstr "niet-ondersteunde centrale mapgrootte"

#: src/libslic3r/miniz_extension.cpp:117
msgid "allocation failed"
msgstr "toewijzing mislukt"

#: src/libslic3r/miniz_extension.cpp:119
msgid "file open failed"
msgstr "bestand openen mislukt"

#: src/libslic3r/miniz_extension.cpp:121
msgid "file create failed"
msgstr "bestand creëren mislukt"

#: src/libslic3r/miniz_extension.cpp:123
msgid "file write failed"
msgstr "bestand schrijven mislukt"

#: src/libslic3r/miniz_extension.cpp:125
msgid "file read failed"
msgstr "bestand lezen mislukt"

#: src/libslic3r/miniz_extension.cpp:127
msgid "file close failed"
msgstr "bestand sluiten mislukt"

#: src/libslic3r/miniz_extension.cpp:129
msgid "file seek failed"
msgstr "bestand zoeken mislukt"

#: src/libslic3r/miniz_extension.cpp:131
msgid "file stat failed"
msgstr "bestandsstatus mislukt"

#: src/libslic3r/miniz_extension.cpp:133
msgid "invalid parameter"
msgstr "ongeldige parameter"

#: src/libslic3r/miniz_extension.cpp:135
msgid "invalid filename"
msgstr "ongeldige bestandsnaam"

#: src/libslic3r/miniz_extension.cpp:137
msgid "buffer too small"
msgstr "buffer te klein"

#: src/libslic3r/miniz_extension.cpp:139
msgid "internal error"
msgstr "interne fout"

#: src/libslic3r/miniz_extension.cpp:141
msgid "file not found"
msgstr "bestand niet gevonden"

#: src/libslic3r/miniz_extension.cpp:143
msgid "archive is too large"
msgstr "archief te groot"

#: src/libslic3r/miniz_extension.cpp:145
msgid "validation failed"
msgstr "validatie mislukt"

#: src/libslic3r/miniz_extension.cpp:147
msgid "write calledback failed"
msgstr "terugschrijven mislukt"

#: src/libslic3r/Print.cpp:466
msgid "All objects are outside of the print volume."
msgstr "Alle objecten bevinden zich buiten het printvolume."

#: src/libslic3r/Print.cpp:469
msgid "The supplied settings will cause an empty print."
msgstr "De ingevoerde instellingen resulteren in een lege print."

#: src/libslic3r/Print.cpp:473
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""
"Sommige objecten staan te dicht op elkaar. De extruder zal er tegenaan "
"botsen."

#: src/libslic3r/Print.cpp:475
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""
"Sommige objecten zijn te groot en kunnen niet geprint worden zonder "
"botsingen."

#: src/libslic3r/Print.cpp:481
msgid ""
"Avoid crossing perimeters option and avoid crossing curled overhangs option "
"cannot be both enabled together."
msgstr ""

#: src/libslic3r/Print.cpp:490
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""
"Alleen een enkel object mag geprint worden in de spiraalmodus. Verwijder "
"alle objecten op één na, of sta achtereenvolgens printen toe bij "
"\"complete_objects\"."

#: src/libslic3r/Print.cpp:494
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""
"De spiraalmodus kan alleen gebruikt worden met enkel-materiaal objecten."

#: src/libslic3r/Print.cpp:498
msgid ""
"Machine limits cannot be emitted to G-Code when Klipper firmware flavor is "
"used. Change the value of machine_limits_usage."
msgstr ""

#: src/libslic3r/Print.cpp:525
#, boost-format
msgid "The object %1% exceeds the maximum build volume height."
msgstr ""

#: src/libslic3r/Print.cpp:526
#, boost-format
msgid ""
"While the object %1% itself fits the build volume, its last layer exceeds "
"the maximum build volume height."
msgstr ""

#: src/libslic3r/Print.cpp:527
msgid ""
"You might want to reduce the size of your model or change current print "
"settings and retry."
msgstr ""

#: src/libslic3r/Print.cpp:543
msgid "Variable layer height is not supported with Organic supports."
msgstr ""

#: src/libslic3r/Print.cpp:556
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""
"Het afveegblok wordt alleen ondersteunt als alle extruders dezelfde nozzle- "
"en filamentdiameter hebben."

#: src/libslic3r/Print.cpp:563
msgid ""
"The Wipe Tower is currently only supported for the Marlin, Klipper, RepRap/"
"Sprinter, RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:565
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""
"Het afveegblok wordt alleen ondersteunt met de relatieve extruderinstelling "
"('use_relative_e_distances' = 1)."

#: src/libslic3r/Print.cpp:567
msgid ""
"Ooze prevention is only supported with the wipe tower when "
"'single_extruder_multi_material' is off."
msgstr ""

#: src/libslic3r/Print.cpp:569
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""
"Het afveegblok niet ondersteunt bij volumetrische extrusiewaarden "
"('use_volumetric_e' = 0)."

#: src/libslic3r/Print.cpp:571
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""
"Het afveegblok wordt momenteel niet ondersteund voor multi-materiaal "
"achtereenvolgens printen."

#: src/libslic3r/Print.cpp:581
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze een "
"gelijke laagdikte hebben"

#: src/libslic3r/Print.cpp:583
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze op "
"een gelijk aantal raftlagen zijn geplaatst"

#: src/libslic3r/Print.cpp:586
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als de "
"instelling 'support_material_contact_distance' gelijk staat"

#: src/libslic3r/Print.cpp:588
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als ze "
"tegelijk gesliced worden."

#: src/libslic3r/Print.cpp:613
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""
"Het afveegblok wordt alleen ondersteunt als alle objecten dezelfde variabele "
"laagdikte hebben"

#: src/libslic3r/Print.cpp:637
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""
"Een of meer objecten staan ingesteld op een extruder die de printer niet "
"heeft."

#: src/libslic3r/Print.cpp:650
#, boost-format
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr "%1%=%2% mm is te weinig om te printen bij een laagdikte van %3% mm"

#: src/libslic3r/Print.cpp:653
#, boost-format
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr "Te veel %1%=%2% mm om te printen met een nozzlediameter van %3% mm"

#: src/libslic3r/Print.cpp:664
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"Printen met meerdere extruders met verschillende nozzlediameters. Als "
"support met de huidige extruder geprint moet worden, moeten alle nozzles "
"dezelfde diameter hebben ('support_material_extruder' = 0 of "
"'support_material_interface_extruder' = 0)."

#: src/libslic3r/Print.cpp:672
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"Om het afveegblok te laten samenwerken met oplosbare support, moeten de "
"supportlagen gesynchroniseerd worden met de objectlagen."

#: src/libslic3r/Print.cpp:712
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""
"Laagdikte van de eerste laag kan niet groter zijn dan de nozzlediameter"

#: src/libslic3r/Print.cpp:717
msgid "Layer height can't be greater than nozzle diameter"
msgstr "Laagdikte kan niet groter zijn dan de nozzlediameter"

#: src/libslic3r/Print.cpp:738
msgid ""
"Relative extruder addressing requires resetting the extruder position at "
"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
"layer_gcode."
msgstr ""
"Relatieve extruderwaarden vereist het resetten van de extruderpositie op "
"elke laag om decimale onnauwkeurigheid te voorkomen. Voeg \"G92 E0\" toe aan "
"layer_gcode."

#: src/libslic3r/Print.cpp:740
msgid ""
"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
"absolute extruder addressing."
msgstr ""
"\"G92 E0\" gevonden in before_layer_gcode, wat niet compatibel is met "
"absolute positionering."

#: src/libslic3r/Print.cpp:742
msgid ""
"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
"extruder addressing."
msgstr ""
"\"G92 E0\" gevonden in layer_gcode, wat niet compatibel is met absolute "
"positionering."

#: src/libslic3r/Print.cpp:911
msgid "Generating skirt and brim"
msgstr "Genereer skirt en brim"

#: src/libslic3r/Print.cpp:959
msgid "Exporting G-code"
msgstr "G-code exporteren"

#: src/libslic3r/Print.cpp:963
msgid "Generating G-code"
msgstr "G-code genereren"

#: src/libslic3r/Print.cpp:1183
msgid "Alert if supports needed"
msgstr ""

#. TRN Alert when support is needed. Describes that the model has long bridging extrusions which may print badly
#: src/libslic3r/Print.cpp:1189
msgid "Long bridging extrusions"
msgstr ""

#. TRN Alert when support is needed. Describes bridge anchors/turns in the air, which will definitely print badly
#: src/libslic3r/Print.cpp:1191
msgid "Floating bridge anchors"
msgstr ""

#. TRN Alert when support is needed. Describes that the print has large overhang area which will print badly or not print at all.
#: src/libslic3r/Print.cpp:1195
msgid "Collapsing overhang"
msgstr ""

#. TRN Alert when support is needed. Describes extrusions that are not supported enough and come out curled or loose.
#: src/libslic3r/Print.cpp:1198
msgid "Loose extrusions"
msgstr ""

#. TRN Alert when support is needed. Describes that the print has low bed adhesion and may became loose.
#: src/libslic3r/Print.cpp:1202
msgid "Low bed adhesion"
msgstr ""

#. TRN Alert when support is needed. Describes that the object has part that is not connected to the bed and will not print at all without supports.
#: src/libslic3r/Print.cpp:1204
msgid "Floating object part"
msgstr ""

#. TRN Alert when support is needed. Describes that the object has thin part that may brake during printing
#: src/libslic3r/Print.cpp:1206
msgid "Thin fragile part"
msgstr ""

#. TRN this translation rule is used to translate lists of uknown size on single line. The first argument is element of the list,
#. the second argument may be element or rest of the list. For most languages, this does not need translation, but some use different
#. separator than comma and some use blank space in front of the separator.
#: src/libslic3r/Print.cpp:1215
#, boost-format
msgid "%1%, %2%"
msgstr ""

#: src/libslic3r/Print.cpp:1314
msgid "Consider enabling supports."
msgstr ""

#: src/libslic3r/Print.cpp:1316
msgid "Also consider enabling brim."
msgstr ""

#. TRN Alert message for detected print issues. first argument is a list of detected issues.
#: src/libslic3r/Print.cpp:1320
#, boost-format
msgid ""
"Detected print stability issues:\n"
"%1%"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:530
msgid "Pad brim size is too small for the current configuration."
msgstr "Brimgrootte is te klein voor de huidige configuratie."

#: src/libslic3r/SLAPrint.cpp:547
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""
"Kan niet doorgaan zonder supportpunten! Voeg supportpunten toe of schakel "
"supportgeneratie uit."

#: src/libslic3r/SLAPrint.cpp:559
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""
"Verhoging is te klein voor het object. Gebruik de 'Basisplaat rondom object'-"
"optie om het object zonder verhoging te printen."

#: src/libslic3r/SLAPrint.cpp:565
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""
"De uiteinden van de pijlers worden ingezet op de gaten tussen het object en "
"de basisplaat. De instelling 'Veilige afstand voor supportbasis' moet groter "
"zijn dan de 'Basisplaat-objectgat'-parameter hiervoor."

#: src/libslic3r/SLAPrint.cpp:580
msgid "Exposition time is out of printer profile bounds."
msgstr "De belichtingstijd valt buiten de grenzen van het printerprofiel."

#: src/libslic3r/SLAPrint.cpp:587
msgid "Initial exposition time is out of printer profile bounds."
msgstr "Initiële belichtingstijd valt buiten de printerprofielgrenzen."

#: src/libslic3r/SLAPrint.cpp:597
#, c-format, boost-format
msgid "Unknown archive format: %s"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:703
msgid "Slicing done"
msgstr "Slicen voltooid"

#. TRN Status of the SLA print calculation
#: src/libslic3r/SLAPrintSteps.cpp:55
msgid "Assembling model from parts"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:56
msgid "Hollowing model"
msgstr "Model uithollen"

#: src/libslic3r/SLAPrintSteps.cpp:57
msgid "Drilling holes into model."
msgstr "Afvoergaten toevoegen."

#: src/libslic3r/SLAPrintSteps.cpp:58
msgid "Slicing model"
msgstr "Model slicen"

#: src/libslic3r/SLAPrintSteps.cpp:59 src/libslic3r/SLAPrintSteps.cpp:692
msgid "Generating support points"
msgstr "Supportpunten genereren"

#: src/libslic3r/SLAPrintSteps.cpp:60
msgid "Generating support tree"
msgstr "Supportboom genereren"

#: src/libslic3r/SLAPrintSteps.cpp:61
msgid "Generating pad"
msgstr "Basisplaat genereren"

#: src/libslic3r/SLAPrintSteps.cpp:62
msgid "Slicing supports"
msgstr "Support slicen"

#: src/libslic3r/SLAPrintSteps.cpp:77
msgid "Merging slices and calculating statistics"
msgstr "Slices samenvoegen en statistieken berekenen"

#: src/libslic3r/SLAPrintSteps.cpp:78
msgid "Rasterizing layers"
msgstr "Lagen roosteren"

#: src/libslic3r/SLAPrintSteps.cpp:259
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr "Mesh uithollen is niet geschikt voor dit model (heeft geen volume)."

#: src/libslic3r/SLAPrintSteps.cpp:266
msgid "Unable to drill the current configuration of holes into the model."
msgstr ""
"Niet mogelijk om de huidige configuratie van gaten te maken in het model."

#: src/libslic3r/SLAPrintSteps.cpp:275
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""
"Afvoergaten toevoegen mislukt. Dit komt meestal door een incorrect model. "
"Probeer die eerst te repareren."

#: src/libslic3r/SLAPrintSteps.cpp:283
msgid "Failed to drill some holes into the model"
msgstr "Gaten maken in het model is mislukt"

#: src/libslic3r/SLAPrintSteps.cpp:293
msgid ""
"Some parts of the print will be previewed with approximated meshes. This "
"does not affect the quality of slices or the physical print in any way."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:741 src/libslic3r/SLAPrintSteps.cpp:750
#: src/libslic3r/SLAPrintSteps.cpp:788
msgid "Visualizing supports"
msgstr "Visualiseer support"

#: src/libslic3r/SLAPrintSteps.cpp:780
msgid "No pad can be generated for this model with the current configuration"
msgstr ""
"Met de huidige configuratie kan voor dit model geen basisplaat gegenereerd "
"worden"

#: src/libslic3r/SLAPrintSteps.cpp:909
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""
"Er zijn niet-printbare objecten. Probeer de supportinstellingen te "
"veranderen om het object printbaar te maken."

#: src/libslic3r/PrintBase.cpp:80
msgid "Failed processing of the output_filename_format template."
msgstr "Verwerken van de 'output_filename_format'-template mislukt."

#: src/libslic3r/PrintConfig.cpp:251 src/libslic3r/PrintConfig.cpp:252
msgid "Printer technology"
msgstr "Printtechnologie"

#: src/libslic3r/PrintConfig.cpp:257
msgid "Bed shape"
msgstr "Bedvorm"

#: src/libslic3r/PrintConfig.cpp:262
msgid "Bed custom texture"
msgstr "Custom bedtextuur"

#: src/libslic3r/PrintConfig.cpp:267
msgid "Bed custom model"
msgstr "Custom bedmodel"

#: src/libslic3r/PrintConfig.cpp:272
msgid "Elephant foot compensation"
msgstr "Squish-compensatie"

#: src/libslic3r/PrintConfig.cpp:274
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"De eerste laag wordt verkleind in horizontale richting met de ingestelde "
"waarde ter compensatie van het platdrukken."

#: src/libslic3r/PrintConfig.cpp:282
msgid "G-code thumbnails"
msgstr "G-code miniaturen"

#: src/libslic3r/PrintConfig.cpp:283
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
"following format: \"XxY, XxY, ...\""
msgstr ""
"Afbeeldingsgrootte wordt opgeslagen in de .gcode en .sl1/.sl1s-bestanden in "
"het formaat: \"XxY, XxY, ...\""

#: src/libslic3r/PrintConfig.cpp:289
msgid "Format of G-code thumbnails"
msgstr "Bestandstype van G-code-voorbeelden"

#: src/libslic3r/PrintConfig.cpp:290
msgid ""
"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
"QOI for low memory firmware"
msgstr ""
"Bestandstype van G-code-voorbeelden: PNG voor de beste kwaliteit, JPG voor "
"kleinste bestand, QOI voor firmware met weinig geheugen"

#: src/libslic3r/PrintConfig.cpp:298
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"Deze instelling is voor de laagdikte (en dus het totaal aantal lagen). "
"Dunnere lagen geven een betere nauwkeurigheid, maar het printen duurt langer."

#: src/libslic3r/PrintConfig.cpp:306
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""
"Stel dit in als maximale hoogte die bereikt kan worden door de printer."

#: src/libslic3r/PrintConfig.cpp:314
msgid "Hostname, IP or URL"
msgstr "Hostnaam, IP of URL"

#: src/libslic3r/PrintConfig.cpp:315
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""
"PrusaSlicer kan .gcode-bestanden uploaden naar een printerhost. Dit tekstvak "
"bevat de hostnaam, IP-adres of URL van de printerhostinstantie. Als de "
"printerhost achter HAProxy met basis-authorisatie aan staat, kan toegang "
"worden verkregen door gebruikersnaam en wachtwoord in te voeren in bij de "
"URL in de vorm: https://gebruikersnaam:wachtwoord@je-octopi-adres/"

#: src/libslic3r/PrintConfig.cpp:324
msgid "API Key / Password"
msgstr "API-key / wachtwoord"

#: src/libslic3r/PrintConfig.cpp:325
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"PrusaSlicer kan .gcode-bestanden naar een printerhost uploaden. Dit veld "
"moet de API-key of het wachtwoord voor authenticatie bevatten."

#: src/libslic3r/PrintConfig.cpp:333
msgid "Name of the printer"
msgstr "Naam van de printer"

#: src/libslic3r/PrintConfig.cpp:341
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
"Aangepast CA-certificaatbestand kan gespecificeerd worden voor HTTPS-"
"OctoPrint verbindingen in CRT/PEM-formaat. Als er niets wordt ingevuld, "
"wordt de standaard OS-CA-certificaatopslaglocatie gebruikt."

#: src/libslic3r/PrintConfig.cpp:357
msgid "Password"
msgstr "Wachtwoord"

#: src/libslic3r/PrintConfig.cpp:365
msgid "Ignore HTTPS certificate revocation checks"
msgstr "Negeer HTTPS-certificaat herroepingscontrole"

#: src/libslic3r/PrintConfig.cpp:366
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""
"Negeer HTTPS-certificaat herroepingscontrole in geval van missende of "
"offline distributiepunten. U kunt dit aanzetten voor zelf-gesigneerde "
"certificaten als de verbinding mislukt."

#: src/libslic3r/PrintConfig.cpp:373
msgid "Printer preset names"
msgstr "Printerpresetnamen"

#: src/libslic3r/PrintConfig.cpp:374
msgid "Names of presets related to the physical printer"
msgstr "Namen van de presets gerelateerd aan de fysieke printer"

#: src/libslic3r/PrintConfig.cpp:379
msgid "Authorization Type"
msgstr "Authorisatietype"

#: src/libslic3r/PrintConfig.cpp:382
msgid "API key"
msgstr "API-sleutel"

#: src/libslic3r/PrintConfig.cpp:383
msgid "HTTP digest"
msgstr "HTTP weergave"

#: src/libslic3r/PrintConfig.cpp:403
msgid "Avoid crossing curled overhangs (Experimental)"
msgstr ""

#. TRN PrintSettings: "Avoid crossing curled overhangs (Experimental)"
#: src/libslic3r/PrintConfig.cpp:405
msgid ""
"Plan travel moves such that the extruder avoids areas where the filament may "
"be curled up. This is mostly happening on steeper rounded overhangs and may "
"cause a crash with the nozzle. This feature slows down both the print and "
"the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:412
msgid "Avoid crossing perimeters"
msgstr "Vermijd kruisende perimeters"

#: src/libslic3r/PrintConfig.cpp:413
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"Optimaliseer de bewegingen om kruisende perimeters te minimaliseren. Dit is "
"handig bij bowden-extruders die gevoelig zijn voor druipen. Deze aanpassing "
"vertraagd zowel de print als de G-code-generatie."

#: src/libslic3r/PrintConfig.cpp:420
msgid "Avoid crossing perimeters - Max detour length"
msgstr "Vermijd kruisende perimeters - maximale omleidingslengte"

#: src/libslic3r/PrintConfig.cpp:422
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""
"De maximale omleidingsafstand voor vermijden van perimeterkruisingen. Als de "
"omleidingsafstand groter is dan deze waarde, worden perimeterkruisingen niet "
"toegepast voor deze beweging. De omleidingsafstand kan ingesteld worden als "
"een absolute waarde of als percentage (bijv. 50%) van een rechtlijnige "
"beweging."

#: src/libslic3r/PrintConfig.cpp:425
msgid "mm or % (zero to disable)"
msgstr "mm of % (stel in op 0 om uit te zetten)"

#: src/libslic3r/PrintConfig.cpp:432 src/libslic3r/PrintConfig.cpp:2983
msgid "Other layers"
msgstr "Overige lagen"

#: src/libslic3r/PrintConfig.cpp:433
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""
"Bedtemperatuur voor lagen na de eerste laag. Als dit ingesteld is op 0, "
"worden bedverwarmingscommando's uitgezet."

#: src/libslic3r/PrintConfig.cpp:436
msgid "Bed temperature"
msgstr "Bedtemperatuur"

#: src/libslic3r/PrintConfig.cpp:443
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"Deze custom code wordt toegevoegd bij elke laagwisseling, vlak voor de Z-"
"beweging. U kunt hier variabelen gebruiken voor alle instellingen zoals "
"'layer_num' en 'layer_z'."

#: src/libslic3r/PrintConfig.cpp:453
msgid "Between objects G-code"
msgstr "G-code die komt tussen objecten"

#: src/libslic3r/PrintConfig.cpp:454
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"Deze code wordt ingevoegd tussen objecten bij het achtereenvolgens printen. "
"Standaard worden de extruder- en bedtemperatuur gereset met een wacht-niet-"
"commando, hoewel, als M104, M109, M140 of M190 in de custom code worden "
"gedetecteerd zal PrusaSlicer deze commando's niet meenemen. Merk op dat "
"variabelen voor alle instellingen gebruikt kunnen worden."

#. TRN Print Settings: "Bottom solid layers"
#: src/libslic3r/PrintConfig.cpp:463 src/libslic3r/PrintConfig.cpp:471
msgctxt "Layers"
msgid "Bottom"
msgstr "Onderkant"

#: src/libslic3r/PrintConfig.cpp:465
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "Aantal te genereren dichte lagen voor ondervlakken."

#: src/libslic3r/PrintConfig.cpp:466
msgid "Bottom solid layers"
msgstr "Dichte bodemlagen"

#: src/libslic3r/PrintConfig.cpp:473
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""
"Het aantal dichte bodemlagen wordt verhoogd als blijkt dat het nodig is om "
"de minimale bodemshelldikte te garanderen."

#: src/libslic3r/PrintConfig.cpp:475
msgid "Minimum bottom shell thickness"
msgstr "Minimale shelldikte aan de onderzijde"

#: src/libslic3r/PrintConfig.cpp:481
msgid "Bridge"
msgstr "Brug"

#: src/libslic3r/PrintConfig.cpp:482
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor bruggen. Als dit ingesteld is "
"op 0, wordt de acceleratie-instelling voor bruggen uitgezet."

#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:740
#: src/libslic3r/PrintConfig.cpp:1250 src/libslic3r/PrintConfig.cpp:1259
#: src/libslic3r/PrintConfig.cpp:1446 src/libslic3r/PrintConfig.cpp:1455
#: src/libslic3r/PrintConfig.cpp:1464 src/libslic3r/PrintConfig.cpp:1473
#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1806
#: src/libslic3r/PrintConfig.cpp:1818 src/libslic3r/PrintConfig.cpp:1828
#: src/libslic3r/PrintConfig.cpp:2021 src/libslic3r/PrintConfig.cpp:2029
msgid "mm/s²"
msgstr "mm/s²"

#: src/libslic3r/PrintConfig.cpp:490
msgid "Bridging angle"
msgstr "Brughoek"

#: src/libslic3r/PrintConfig.cpp:492
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"Brughoek overschrijven. Als dit ingesteld is op 0, wordt de optimale hoek "
"automatisch berekend, anders wordt de opgegeven hoek voor alle bruggen "
"gebruikt. 180° staat gelijk aan 0°."

#: src/libslic3r/PrintConfig.cpp:501
msgid "Bridges fan speed"
msgstr "Ventilatorsnelheid voor bruggen"

#: src/libslic3r/PrintConfig.cpp:502
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "Deze ventilatorsnelheid wordt aangehouden bij bruggen en overhanging."

#: src/libslic3r/PrintConfig.cpp:503 src/libslic3r/PrintConfig.cpp:594
#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:612
#: src/libslic3r/PrintConfig.cpp:621 src/libslic3r/PrintConfig.cpp:1200
#: src/libslic3r/PrintConfig.cpp:1647 src/libslic3r/PrintConfig.cpp:1836
#: src/libslic3r/PrintConfig.cpp:1899 src/libslic3r/PrintConfig.cpp:2153
#: src/libslic3r/PrintConfig.cpp:2212 src/libslic3r/PrintConfig.cpp:2976
#: src/libslic3r/PrintConfig.cpp:3209 src/libslic3r/PrintConfig.cpp:3443
#: src/libslic3r/PrintConfig.cpp:3669 src/libslic3r/PrintConfig.cpp:3948
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:510
msgid "Bridge flow ratio"
msgstr "Brugextrusieverhouding"

#: src/libslic3r/PrintConfig.cpp:512
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"Deze factor beïnvloedt de hoeveelheid plastic voor bruggen. Deze kan "
"verlaagd worden om het extrudaat strak te trekken en doorzakking te "
"voorkomen. Hoewel de systeemwaarden goed zijn, kan geëxperimenteerd worden "
"met de koeling voor dit aangepast wordt."

#: src/libslic3r/PrintConfig.cpp:522
msgid "Bridges"
msgstr "Bruggen"

#: src/libslic3r/PrintConfig.cpp:524
msgid "Speed for printing bridges."
msgstr "Printsnelheid voor bruggen."

#: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:1007
#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1024
#: src/libslic3r/PrintConfig.cpp:1032 src/libslic3r/PrintConfig.cpp:1059
#: src/libslic3r/PrintConfig.cpp:1078 src/libslic3r/PrintConfig.cpp:1384
#: src/libslic3r/PrintConfig.cpp:1586 src/libslic3r/PrintConfig.cpp:1666
#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:1774
#: src/libslic3r/PrintConfig.cpp:1786 src/libslic3r/PrintConfig.cpp:1796
#: src/libslic3r/PrintConfig.cpp:1858 src/libslic3r/PrintConfig.cpp:1917
#: src/libslic3r/PrintConfig.cpp:2060 src/libslic3r/PrintConfig.cpp:2287
#: src/libslic3r/PrintConfig.cpp:2296 src/libslic3r/PrintConfig.cpp:2830
#: src/libslic3r/PrintConfig.cpp:3082 src/libslic3r/PrintConfig.cpp:3092
msgid "mm/s"
msgstr "mm/s"

#: src/libslic3r/PrintConfig.cpp:532
msgid "Enable dynamic overhang speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:534
msgid "This setting enables dynamic speed control on overhangs."
msgstr ""

#. TRN PrintSettings : "Dynamic overhang speed"
#: src/libslic3r/PrintConfig.cpp:539
msgid ""
"Overhang size is expressed as a percentage of overlap of the extrusion with "
"the previous layer: 100% would be full overlap (no overhang), while 0% "
"represents full overhang (floating extrusion, bridge). Speeds for overhang "
"sizes in between are calculated via linear interpolation. If set as "
"percentage, the speed is calculated over the external perimeter speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:545 src/libslic3r/PrintConfig.cpp:592
msgid "speed for 0% overlap (bridge)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:557
#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:575
#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:1303
#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:2396
#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2785
#: src/libslic3r/PrintConfig.cpp:3053
msgid "mm/s or %"
msgstr "mm/s of %"

#: src/libslic3r/PrintConfig.cpp:554 src/libslic3r/PrintConfig.cpp:601
msgid "speed for 25% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:563 src/libslic3r/PrintConfig.cpp:610
msgid "speed for 50% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:572 src/libslic3r/PrintConfig.cpp:619
msgid "speed for 75% overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:581
msgid "Enable dynamic fan speeds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:582
msgid "This setting enables dynamic fan speed control on overhangs."
msgstr ""

#. TRN FilamentSettings : "Dynamic fan speeds"
#: src/libslic3r/PrintConfig.cpp:587
msgid ""
"Overhang size is expressed as a percentage of overlap of the extrusion with "
"the previous layer: 100% would be full overlap (no overhang), while 0% "
"represents full overhang (floating extrusion, bridge). Fan speeds for "
"overhang sizes in between are calculated via linear interpolation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:628
msgid "Brim width"
msgstr "Breedte van de brim"

#: src/libslic3r/PrintConfig.cpp:630
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""
"De horizontale breedte van de brim die geprint wordt rondom elk object op de "
"eerste laag. Als een raft wordt gebruikt, staat de brim uit (gebruik "
"raft_first_layer_expansion)."

#: src/libslic3r/PrintConfig.cpp:639
msgid "Brim type"
msgstr "Brimtype"

#: src/libslic3r/PrintConfig.cpp:641
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""
"De plaatsen waar de brim wordt geprint rond elk object op de eerste laag."

#: src/libslic3r/PrintConfig.cpp:643
msgid "No brim"
msgstr "Geen brim"

#: src/libslic3r/PrintConfig.cpp:644
msgid "Outer brim only"
msgstr "Alleen buitenste brim"

#: src/libslic3r/PrintConfig.cpp:645
msgid "Inner brim only"
msgstr "Alleen binnenste brim"

#: src/libslic3r/PrintConfig.cpp:646
msgid "Outer and inner brim"
msgstr "Buitenste en binnenste brim"

#: src/libslic3r/PrintConfig.cpp:652
msgid "Brim separation gap"
msgstr "Brim-scheidingsgat"

#: src/libslic3r/PrintConfig.cpp:654
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr ""
"Afstand van de brim van het geprinte object. De afstand wordt toegepast na "
"het compenseren van de squish-compensatie."

#: src/libslic3r/PrintConfig.cpp:661
msgid "Colorprint height"
msgstr "Kleurenprinthoogte"

#: src/libslic3r/PrintConfig.cpp:662
msgid "Heights at which a filament change is to occur."
msgstr "Hoogte waarbij de filamentwissel plaatsvindt."

#: src/libslic3r/PrintConfig.cpp:672
msgid "Compatible printers condition"
msgstr "Voorwaarden compatibele printers"

#: src/libslic3r/PrintConfig.cpp:673
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van "
"een actief printerprofiel. Als deze aanduiding op waar staat, wordt dit "
"profiel beschouwd als compatibel voor het actieve printerprofiel."

#: src/libslic3r/PrintConfig.cpp:687
msgid "Compatible print profiles condition"
msgstr "Voorwaarden compatibele printprofielen"

#: src/libslic3r/PrintConfig.cpp:688
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van "
"een actief printprofiel. Als deze aanduiding op waar staat, wordt dit "
"profiel beschouwd als compatibel met het actieve printprofiel."

#: src/libslic3r/PrintConfig.cpp:705
msgid "Complete individual objects"
msgstr "Achtereenvolgens objecten printen"

#: src/libslic3r/PrintConfig.cpp:706
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"Als meerdere objecten geprint worden, zorgt deze optie dat de objecten "
"afzonderlijk voltooid worden voordat bewogen wordt naar de volgende. "
"PrusaSlicer voorkomt botsingen van de extruder tegen eerder geprinte "
"objecten en zal u daar ook voor waarschuwen, maar blijf wel alert."

#: src/libslic3r/PrintConfig.cpp:714
msgid "Enable auto cooling"
msgstr "Automatisch koelen toestaan"

#: src/libslic3r/PrintConfig.cpp:715
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""
"Dit vinkje zorgt dat automatisch gekoeld wordt; de print- en "
"ventilatorsnelheid worden aangepast op basis van de laagprinttijd."

#: src/libslic3r/PrintConfig.cpp:720
msgid "Cooling tube position"
msgstr "Koelbuispositie"

#: src/libslic3r/PrintConfig.cpp:721
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "Afstand vanaf de nozzle tot het middelpunt van de koelbuis."

#: src/libslic3r/PrintConfig.cpp:728
msgid "Cooling tube length"
msgstr "Koelbuislengte"

#: src/libslic3r/PrintConfig.cpp:729
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""
"Lengte van de koelbuis om de ruimte voor koelbewegingen daarin te beperken."

#: src/libslic3r/PrintConfig.cpp:737
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"Dit is de acceleratie waarop uw printer wordt ingesteld na een specifieke "
"acceleratiewaarde (perimeters/vulling). Als dit ingesteld is op 0, worden "
"geen acceleratiewaarden opnieuw ingesteld."

#: src/libslic3r/PrintConfig.cpp:746
msgid "Default filament profile"
msgstr "Standaard filamentprofiel"

#: src/libslic3r/PrintConfig.cpp:747
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"Standaard filamentprofiel dat geassocieerd wordt met huidig printerprofiel. "
"Bij selectie van het huidige printerprofiel wordt dit filamentprofiel "
"geactiveerd."

#: src/libslic3r/PrintConfig.cpp:753
msgid "Default print profile"
msgstr "Standaard printprofiel"

#: src/libslic3r/PrintConfig.cpp:754 src/libslic3r/PrintConfig.cpp:3895
#: src/libslic3r/PrintConfig.cpp:3906
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"Standaard printprofiel dat geassocieerd wordt met huidig printerprofiel. Bij "
"selectie van het huidige printerprofiel wordt dit printprofiel geactiveerd."

#: src/libslic3r/PrintConfig.cpp:760
msgid "Disable fan for the first"
msgstr "Zet ventilator uit voor de eerste"

#: src/libslic3r/PrintConfig.cpp:761
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"U kunt dit instellen op een positieve waarde om de ventilator uit te "
"schakelen tijdens het printen van de eerste lagen voor een betere adhesie."

#: src/libslic3r/PrintConfig.cpp:770
msgid "Don't support bridges"
msgstr "Geen support voor bruggen"

#: src/libslic3r/PrintConfig.cpp:772
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr "Experimentele optie om support onder brugvlakken te vermijden."

#: src/libslic3r/PrintConfig.cpp:778
msgid "Distance between copies"
msgstr "Ruimte tussen kopieën"

#: src/libslic3r/PrintConfig.cpp:779
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""
"Gebruikte afstand tussen objecten bij automatisch schikken in de "
"modelweergave."

#: src/libslic3r/PrintConfig.cpp:787
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""
"Deze eindprocedure wordt aan het eind van het outputbestand ingevoegd. Merk "
"op dat variabelen voor alle instellingen gebruikt kunnen worden."

#: src/libslic3r/PrintConfig.cpp:797
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""
"Deze eindprocedure is ingevoegd aan het eind van het outputbestand, nog voor "
"de eind G-code (en voor de toolwisselingen). Merk op dat variabelen voor "
"alle instellingen gebruikt kunnen worden. Als de printer meerdere extruders "
"heeft, wordt deze G-code in de extrudervolgorde uitgevoerd."

#: src/libslic3r/PrintConfig.cpp:808
msgid "Top fill pattern"
msgstr "Vulpatroon voor bovenzijde"

#: src/libslic3r/PrintConfig.cpp:810
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""
"Vullingspatroon voor bovenste lagen. Dit heeft alleen invloed op de bovenste "
"zichtbare laag en niet de aangrenzende horizontale dichte shells."

#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:1226
#: src/libslic3r/PrintConfig.cpp:2796 src/libslic3r/PrintConfig.cpp:2811
msgid "Rectilinear"
msgstr "Rechtlijnig"

#: src/libslic3r/PrintConfig.cpp:814
msgid "Monotonic"
msgstr "Monotoon"

#: src/libslic3r/PrintConfig.cpp:815
msgid "Monotonic Lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:1227
msgid "Aligned Rectilinear"
msgstr "Parallel rechtlijnig"

#: src/libslic3r/PrintConfig.cpp:817 src/libslic3r/PrintConfig.cpp:1233
#: src/libslic3r/PrintConfig.cpp:2812
msgid "Concentric"
msgstr "Concentrisch"

#: src/libslic3r/PrintConfig.cpp:818 src/libslic3r/PrintConfig.cpp:1237
msgid "Hilbert Curve"
msgstr "Hilbert-kromme"

#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:1238
msgid "Archimedean Chords"
msgstr "Archimedes-spiraal"

#: src/libslic3r/PrintConfig.cpp:820 src/libslic3r/PrintConfig.cpp:1239
msgid "Octagram Spiral"
msgstr "Octagramspiraal"

#: src/libslic3r/PrintConfig.cpp:828
msgid "Bottom fill pattern"
msgstr "Vulpatroon voor onderzijde"

#: src/libslic3r/PrintConfig.cpp:830
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""
"Vulpatroon voor de bodemlaag. Dit heeft alleen invloed op de onderste "
"zichtbare laag en niet de aangrenzende horizontale dichte shells."

#: src/libslic3r/PrintConfig.cpp:837 src/libslic3r/PrintConfig.cpp:849
#: src/libslic3r/PrintConfig.cpp:2026
msgid "External perimeters"
msgstr "Buitenste perimeters"

#: src/libslic3r/PrintConfig.cpp:839
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de buitenste perimeters. Als die op 0 blijft staan, zal PrusaSlicer de "
"breedte instellen op 1,125x de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:842 src/libslic3r/PrintConfig.cpp:956
#: src/libslic3r/PrintConfig.cpp:1281 src/libslic3r/PrintConfig.cpp:1498
#: src/libslic3r/PrintConfig.cpp:1550 src/libslic3r/PrintConfig.cpp:1577
#: src/libslic3r/PrintConfig.cpp:2049 src/libslic3r/PrintConfig.cpp:2437
#: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2706
#: src/libslic3r/PrintConfig.cpp:3039 src/libslic3r/PrintConfig.cpp:3278
#: src/libslic3r/PrintConfig.cpp:3293 src/libslic3r/PrintConfig.cpp:3327
#: src/libslic3r/PrintConfig.cpp:3339
msgid "mm or %"
msgstr "mm of %"

#: src/libslic3r/PrintConfig.cpp:851
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Deze instelling heeft effect op de snelheid van buitenste perimeters. Als "
"dit is uitgedrukt als percentage, wordt deze genomen over de snelheid van de "
"perimeters. Als dit ingesteld is op 0, wordt een automatische snelheid "
"genomen."

#: src/libslic3r/PrintConfig.cpp:861
msgid "External perimeters first"
msgstr "Buitenste perimeters eerst"

#: src/libslic3r/PrintConfig.cpp:863
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""
"Print de buitenste perimeters eerder dan de binnenste in plaats van andersom."

#: src/libslic3r/PrintConfig.cpp:869
msgid "Extra perimeters if needed"
msgstr "Extra perimeters indien nodig"

#: src/libslic3r/PrintConfig.cpp:871
#, fuzzy
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"Voeg meer perimeters toe waar nodig om gaten in hellende vlakken te "
"voorkomen. PrusaSlicer blijft perimeters toevoegen, tot meer dan 70% van de "
"rondgang erboven volledig wordt ondersteund."

#: src/libslic3r/PrintConfig.cpp:878
msgid "Extra perimeters on overhangs (Experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:880
msgid ""
"Detect overhang areas where bridges cannot be anchored, and fill them with "
"extra perimeter paths. These paths are anchored to the nearby non-overhang "
"area when possible."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:888
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"De extruder die gebruikt wordt (behalve als meer specifieke "
"extruderinstellingen zijn aangegeven). Deze waarde overschrijft de "
"perimeter- en vullingsextruder, maar niet de supportextruders."

#: src/libslic3r/PrintConfig.cpp:896
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"Stel dit in als verticale afstand tussen de nozzlepunt en de geleidestangen "
"van de X-as. In andere woorden; dit is de hoogte van de vrijloopcilinder "
"rond de extruder en geeft de maximale diepte weer die de extruder kan halen "
"zonder te botsen met eerder geprinte objecten."

#: src/libslic3r/PrintConfig.cpp:907
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"Stel dit in als vrijloopradius rond de extruder. Kies de hoogste waarde "
"(voor de veiligheid) als de extruder niet is gecentreerd. Deze instelling "
"wordt gebruikt om te controleren op botsingen en om te tonen in de "
"modelweergave."

#: src/libslic3r/PrintConfig.cpp:917
msgid "Extruder Color"
msgstr "Extruderkleur"

#: src/libslic3r/PrintConfig.cpp:918 src/libslic3r/PrintConfig.cpp:981
#: src/libslic3r/PrintConfig.cpp:3740
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""
"Dit wordt alleen gebruikt in de PrusaSlicer-interface als een visueel "
"hulpmiddel."

#: src/libslic3r/PrintConfig.cpp:924
msgid "Extruder offset"
msgstr "Extruder-offset"

#: src/libslic3r/PrintConfig.cpp:925
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"Als uw firmware extrudercompensatie niet toestaat, kan daar rekening mee "
"gehouden worden in de G-code. Met deze optie kunt u de compensatie per "
"extruder specificeren op basis van de eerste extruder. Hiervoor zijn "
"positieve coördinaten nodig (die worden van de X- en Y-coördinaten "
"afgetrokken)."

#: src/libslic3r/PrintConfig.cpp:934
msgid "Extrusion axis"
msgstr "Extrusie-as"

#: src/libslic3r/PrintConfig.cpp:935
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"Gebruik deze optie om de naam van de as van de extruder in te stellen "
"(normaal gesproken E, maar soms A)."

#: src/libslic3r/PrintConfig.cpp:940
msgid "Extrusion multiplier"
msgstr "Extrusie vermenigvuldigingsfactor"

#: src/libslic3r/PrintConfig.cpp:941
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"Deze factor verandert het debiet proportioneel. U kunt deze fijnstellen om "
"een mooi oppervlak en dunne wanden te krijgen. Waarden liggen normaal tussen "
"0.9 en 1.1. Check eventueel de filamentdiameter en de extruderstappen (uit "
"de firmware) als u denkt dat dit aangepast moet worden."

#: src/libslic3r/PrintConfig.cpp:950
msgid "Default extrusion width"
msgstr "Standaard extrusiebreedte"

#: src/libslic3r/PrintConfig.cpp:952
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte. Als "
"die op 0 blijft staan, zal PrusaSlicer de extrusiebreedte aanpassen op basis "
"van de nozzlediameter. Als dit is uitgedrukt als percentage, wordt dit "
"berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:964
msgid "Keep fan always on"
msgstr "Laat ventilator altijd aan"

#: src/libslic3r/PrintConfig.cpp:965
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"Als dit is ingeschakeld zal de ventilator nooit uitgezet worden, maar "
"tenminste de ingestelde minimale snelheid aanhouden."

#: src/libslic3r/PrintConfig.cpp:970
msgid "Enable fan if layer print time is below"
msgstr "Schakel de ventilator in bij een printtijd korter dan"

#: src/libslic3r/PrintConfig.cpp:971
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"Als de printtijd voor een laag onder dit aantal seconden komt, zal de "
"ventilator aangezet worden en wordt de snelheid berekend door te "
"interpoleren tussen de minimale en maximale snelheid."

#: src/libslic3r/PrintConfig.cpp:973 src/libslic3r/PrintConfig.cpp:2384
msgid "approximate seconds"
msgstr "geschat aantal seconden"

#: src/libslic3r/PrintConfig.cpp:980 src/libslic3r/PrintConfig.cpp:3739
msgid "Color"
msgstr "Kleur"

#: src/libslic3r/PrintConfig.cpp:986
msgid "Filament notes"
msgstr "Filamentopmerkingen"

#: src/libslic3r/PrintConfig.cpp:987
msgid "You can put your notes regarding the filament here."
msgstr "Hier kunt u opmerkingen over het filament plaatsen."

#: src/libslic3r/PrintConfig.cpp:995 src/libslic3r/PrintConfig.cpp:1864
msgid "Max volumetric speed"
msgstr "Maximale volumetrische snelheid"

#: src/libslic3r/PrintConfig.cpp:996
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"Maximale volumetrische snelheid is toegestaan voor dit filament. Dit beperkt "
"de maximale volumetrische snelheid van een print tot het minimum van de "
"maximale volumetrische snelheid van de print en het filament. Als dit "
"ingesteld is op 0, geldt er geen limiet."

#: src/libslic3r/PrintConfig.cpp:1005
msgid "Loading speed"
msgstr "Laadsnelheid"

#: src/libslic3r/PrintConfig.cpp:1006
msgid "Speed used for loading the filament on the wipe tower."
msgstr "Snelheid die gebruikt wordt voor het afveegblok."

#: src/libslic3r/PrintConfig.cpp:1013
msgid "Loading speed at the start"
msgstr "Laadsnelheid aan het begin"

#: src/libslic3r/PrintConfig.cpp:1014
msgid "Speed used at the very beginning of loading phase."
msgstr "Snelheid die gebruikt wordt aan het begin van de laadfase."

#: src/libslic3r/PrintConfig.cpp:1021
msgid "Unloading speed"
msgstr "Ontlaadsnelheid"

#: src/libslic3r/PrintConfig.cpp:1022
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""
"Snelheid die gebruikt wordt voor het ontladen van het afveegblok (heeft geen "
"effect op het initiële onderdeel van het ontladen direct na de ramming)."

#: src/libslic3r/PrintConfig.cpp:1030
msgid "Unloading speed at the start"
msgstr "Ontlaadsnelheid in het begin"

#: src/libslic3r/PrintConfig.cpp:1031
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""
"Snelheid die gebruikt wordt voor het ontladen van het filament direct na de "
"ramming."

#: src/libslic3r/PrintConfig.cpp:1038
msgid "Delay after unloading"
msgstr "Vertraging na het ontladen"

#: src/libslic3r/PrintConfig.cpp:1039
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""
"Wachttijd voor het ontladen van het filament. Dit kan helpen om betrouwbare "
"toolwisselingen te krijgen met flexibele materialen die meer tijd nodig "
"hebben om te krimpen naar de originele afmetingen."

#: src/libslic3r/PrintConfig.cpp:1048
msgid "Number of cooling moves"
msgstr "Aantal koelbewegingen"

#: src/libslic3r/PrintConfig.cpp:1049
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""
"Het filament wordt gekoeld tijdens het terug en voorwaarts bewegen in de "
"koelbuis. Specificeer het benodigd aantal bewegingen."

#: src/libslic3r/PrintConfig.cpp:1057
msgid "Speed of the first cooling move"
msgstr "Snelheid voor de eerste koelbeweging"

#: src/libslic3r/PrintConfig.cpp:1058
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""
"Koelbewegingen worden gelijkmatig versneld, beginnend vanaf deze snelheid."

#: src/libslic3r/PrintConfig.cpp:1065
msgid "Minimal purge on wipe tower"
msgstr "Minimale afstand op afveegblok"

#: src/libslic3r/PrintConfig.cpp:1066
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"Na een toolwissel is de exacte locatie van het geladen filament onbekend en "
"zal de druk op het filament niet stabiel zijn. Voor het afvegen van de "
"printkop in de vulling zal PrusaSlicer eerst deze hoeveelheid materiaal "
"afvegen aan het afveegblok om vervolgens de vulling of overige objecten goed "
"te kunnen printen."

#: src/libslic3r/PrintConfig.cpp:1070
msgid "mm³"
msgstr "mm³"

#: src/libslic3r/PrintConfig.cpp:1076
msgid "Speed of the last cooling move"
msgstr "Snelheid voor de laatste koelbeweging"

#: src/libslic3r/PrintConfig.cpp:1077
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr "Koelbewegingen versnellen gelijkmatig tot aan deze snelheid."

#: src/libslic3r/PrintConfig.cpp:1084
msgid "Filament load time"
msgstr "Laadtijd van het filament"

#: src/libslic3r/PrintConfig.cpp:1085
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Tijd voor de printerfirmware (of de MMU 2.0) om nieuw filament te laden "
"tijdens een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd "
"wordt toegevoegd aan de totale printtijd in de tijdsschatting."

#: src/libslic3r/PrintConfig.cpp:1092
msgid "Ramming parameters"
msgstr "Rammingparameters"

#: src/libslic3r/PrintConfig.cpp:1093
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""
"Deze frase is bewerkt door het Rammingdialoog en bevat parameters voor de "
"ramming."

#: src/libslic3r/PrintConfig.cpp:1099
msgid "Filament unload time"
msgstr "Ontlaadtijd voor filament"

#: src/libslic3r/PrintConfig.cpp:1100
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Tijd voor de printerfirmware (of de MMU 2.0) om filament te ontladen tijdens "
"een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd wordt "
"toegevoegd aan de totale printtijd in de tijdsschatting."

#: src/libslic3r/PrintConfig.cpp:1108
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"Stel hier de filamentdiameter in. De juiste precisie is benodigd. Gebruik "
"daarom een schuifmaat en doe meerdere metingen over het hele filament. "
"Bereken vervolgens het gemiddelde."

#: src/libslic3r/PrintConfig.cpp:1115 src/libslic3r/PrintConfig.cpp:3783
#: src/libslic3r/PrintConfig.cpp:3784
msgid "Density"
msgstr "Dichtheid"

#: src/libslic3r/PrintConfig.cpp:1116
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"Stel hier de dichtheid van het filament in. Dit is slechts voor de "
"statistieken. Formule voor dichtheid: dichtheid[g/cm³] = massa[g] / "
"volume[cm³]. Formule voor volume: volume[cm³] = 1000 * (diameter[mm])² * π / "
"4 * lengte[mm]."

#: src/libslic3r/PrintConfig.cpp:1119
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:1124
msgid "Filament type"
msgstr "Filamenttype"

#: src/libslic3r/PrintConfig.cpp:1125
msgid "The filament material type for use in custom G-codes."
msgstr "Het filamenttype voor het gebruik van de custom G-codes."

#: src/libslic3r/PrintConfig.cpp:1153
msgid "Soluble material"
msgstr "Oplosbaar materiaal"

#: src/libslic3r/PrintConfig.cpp:1154
msgid "Soluble material is most likely used for a soluble support."
msgstr "Oplosbaar materiaal wordt vaak gebruikt voor oplosbaar support."

#: src/libslic3r/PrintConfig.cpp:1160
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""
"Voer hier de filamentkosten per kilogram in. Dit is alleen voor statistische "
"informatie."

#: src/libslic3r/PrintConfig.cpp:1161
msgid "money/kg"
msgstr "€/kg"

#: src/libslic3r/PrintConfig.cpp:1166
msgid "Spool weight"
msgstr "Spoelgewicht"

#: src/libslic3r/PrintConfig.cpp:1167
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""
"Voer het gewicht van een lege filamentspoel in. Je kunt een halfvolle "
"filamentspoel wegen voor het printen en gemeten gewicht vergelijken met het "
"berekende gewicht van de filamentspoel om te weten te komen of de "
"hoeveelheid filament op de spoel voldoende is om de print te voltooien."

#: src/libslic3r/PrintConfig.cpp:1180 src/libslic3r/PrintConfig.cpp:3890
msgid "(Unknown)"
msgstr "(Onbekend)"

#: src/libslic3r/PrintConfig.cpp:1184
msgid "Fill angle"
msgstr "Vullingshoek"

#: src/libslic3r/PrintConfig.cpp:1186
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"Standaard basishoek voor de vullingsrichting. Hier wordt kruislings overheen "
"geprint. Bruggen worden geprint met de optimale richting. Deze instelling "
"zal die richting niet beïnvloeden."

#: src/libslic3r/PrintConfig.cpp:1197
msgid "Fill density"
msgstr "Vullingsdichtheid"

#: src/libslic3r/PrintConfig.cpp:1199
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""
"Dichtheid van inwendige vulling, uitgedrukt in een percentage (0 - 100%)"

#: src/libslic3r/PrintConfig.cpp:1222
msgid "Fill pattern"
msgstr "Vullingspatroon"

#: src/libslic3r/PrintConfig.cpp:1224
msgid "Fill pattern for general low-density infill."
msgstr "Vulpatroon voor algemene lagere-dichtheidsvulling."

#: src/libslic3r/PrintConfig.cpp:1228 src/libslic3r/PrintConfig.cpp:2842
msgid "Grid"
msgstr "Raster"

#: src/libslic3r/PrintConfig.cpp:1230
msgid "Stars"
msgstr "Sterren"

#: src/libslic3r/PrintConfig.cpp:1231
msgid "Cubic"
msgstr "Kubisch"

#: src/libslic3r/PrintConfig.cpp:1232
msgid "Line"
msgstr "Lijn"

#: src/libslic3r/PrintConfig.cpp:1234 src/libslic3r/PrintConfig.cpp:2798
msgid "Honeycomb"
msgstr "Honingraat"

#: src/libslic3r/PrintConfig.cpp:1235
msgid "3D Honeycomb"
msgstr "3D-honingraat"

#: src/libslic3r/PrintConfig.cpp:1236
msgid "Gyroid"
msgstr "Gyroïde"

#: src/libslic3r/PrintConfig.cpp:1240
msgid "Adaptive Cubic"
msgstr "Adaptief kubisch"

#: src/libslic3r/PrintConfig.cpp:1241
msgid "Support Cubic"
msgstr "Ondersteunend kubisch"

#: src/libslic3r/PrintConfig.cpp:1242
msgid "Lightning"
msgstr "Bliksem"

#: src/libslic3r/PrintConfig.cpp:1248
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor de eerste laag. Als dit "
"ingesteld is op 0, wordt de standaard acceleratie gebruikt."

#: src/libslic3r/PrintConfig.cpp:1256
msgid "First object layer over raft interface"
msgstr "Eerste laag van het object boven de raft-interface"

#: src/libslic3r/PrintConfig.cpp:1257
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""
"Dit is de acceleratie die uw printer gebruikt voor de eerste laag boven de "
"raft-interface. Stel in op 0 om acceleratiecontrole uit te schakelen voor de "
"eerste laag boven de raft-interface."

#: src/libslic3r/PrintConfig.cpp:1266
msgid "First layer bed temperature"
msgstr "Bedtemperatuur eerste laag"

#: src/libslic3r/PrintConfig.cpp:1267
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""
"Bedtemperatuur voor de eerste laag. Als dit ingesteld is op 0, worden "
"bedtemperatuur-commando's weggelaten in de output."

#: src/libslic3r/PrintConfig.cpp:1277
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de eerste laag. Dit kan gebruikt worden om dikkere lagen voor een betere "
"hechting aan het bed te gebruiken. Als dit is uitgedrukt als percentage, "
"wordt dit berekend over de laagdikte van de eerste laag. Als dit is "
"ingesteld op 0, wordt de standaard extrusiebreedte gebruikt."

#: src/libslic3r/PrintConfig.cpp:1291
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""
"Tijdens het printen van zeer dunne lagen kunt u een dikkere bodemlaag "
"printen om bedhechting en tolerantie te verbeteren op niet-perfecte "
"printbedden."

#: src/libslic3r/PrintConfig.cpp:1299
msgid "First layer speed"
msgstr "Snelheid eerste laag"

#: src/libslic3r/PrintConfig.cpp:1300
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"Als dit uitgedrukt wordt als absolute waarde (in mm/s), zal deze snelheid "
"toegepast worden bij alle printbewegingen van de eerste laag, onafhankelijk "
"van het type. Als dit is uitgedrukt als percentage, wordt dit berekend over "
"de standaardsnelheid."

#: src/libslic3r/PrintConfig.cpp:1310
msgid "Speed of object first layer over raft interface"
msgstr "Snelheid van de eerste laag boven de raft-interface"

#: src/libslic3r/PrintConfig.cpp:1311
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""
"Als dit is uitgedrukt als absolute waarde in mm/s wordt de snelheid "
"toegepast voor alle printbewegingen van de eerste laag boven een raft-"
"interface, onafhankelijk van het type. Als dit is uitgedrukt als percentage "
"(bijv. 40%) worden de standaard snelheden verschaald."

#: src/libslic3r/PrintConfig.cpp:1321
msgid "First layer nozzle temperature"
msgstr "Nozzletemperatuur eerste laag"

#: src/libslic3r/PrintConfig.cpp:1322
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""
"Nozzletemperatuur voor de eerste laag. Als je handmatig de temperatuur wilt "
"wijzigen in de print, stel dit dan in op 0 om temperatuurregeling uit te "
"zetten in de G-code."

#: src/libslic3r/PrintConfig.cpp:1330
msgid "Full fan speed at layer"
msgstr "Volledige ventilatorsnelheid op laag"

#: src/libslic3r/PrintConfig.cpp:1331
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""
"De ventilatorsnelheid wordt geleidelijk opgebouwd van 0 op laag "
"\"disable_fan_first_layers\" naar het maximale op laag \"full_fan_speed_layer"
"\". \"full_fan_speed_layer\" wordt genegeerd als die lager is dan "
"\"disable_fan_first_layers\" in welk geval de ventilator zal draaien op de "
"maximaal toegestane snelheid op laag \"disable_fan_first_layers\" + 1."

#: src/libslic3r/PrintConfig.cpp:1343
msgid "Fuzzy skin type."
msgstr "Type oneffen oppervlak."

#: src/libslic3r/PrintConfig.cpp:1346
msgid "Outside walls"
msgstr "Alleen buitenwanden"

#: src/libslic3r/PrintConfig.cpp:1347
msgid "All walls"
msgstr "Alle wanden"

#: src/libslic3r/PrintConfig.cpp:1353
msgid "Fuzzy skin thickness"
msgstr "Dikte van oneffen oppervlak"

#: src/libslic3r/PrintConfig.cpp:1355
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr ""
"De maximale afstand die elke punt kan hebben (naar beide kanten), haaks "
"gemeten op de perimeterwand."

#: src/libslic3r/PrintConfig.cpp:1363
msgid "Fuzzy skin point distance"
msgstr "Puntafstand van oneffen oppervlak"

#: src/libslic3r/PrintConfig.cpp:1365
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""
"Perimeters worden gesplitst in meerdere segmenten bij het toevoegen van "
"punten voor oneffen oppervlak. Verlagen van de afstand zorgt voor een "
"verhoging van het aantal willekeurige punten op de perimeterwand."

#: src/libslic3r/PrintConfig.cpp:1373
msgid "Fill gaps"
msgstr "Vul gaten"

#: src/libslic3r/PrintConfig.cpp:1375
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr ""
"Toestaan van het vullen van gaten tussen perimeters en de binnenste "
"perimeter en vulling."

#: src/libslic3r/PrintConfig.cpp:1382
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"Printsnelheid voor het gatvullen waarbij zigzag-bewegingen worden gebruikt. "
"Houd deze waarde laag om schudden te voorkomen (wat resulteert in "
"resonantieproblemen). Als dit is ingesteld op 0, worden gaten niet gevuld."

#: src/libslic3r/PrintConfig.cpp:1390
msgid "Verbose G-code"
msgstr "Opmerkingen in G-code"

#: src/libslic3r/PrintConfig.cpp:1391
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"Sta dit toe om een G-code met opmerkingen te genereren. Bij elk blok "
"commando's wordt een opmerking geplaatst. Als u print vanaf een SD-kaart, "
"kan de extra grootte van het bestand de firmware vertragen."

#: src/libslic3r/PrintConfig.cpp:1398
msgid "G-code flavor"
msgstr "G-code-variant"

#: src/libslic3r/PrintConfig.cpp:1399
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""
"Sommige G- en M-commando's zijn niet universeel. Stel deze optie in om een "
"compatibele uitvoer te krijgen voor uw printer. De 'Geen extrusie'-"
"instelling kan gebruikt worden om te printen zonder materiaal te extruderen."

#: src/libslic3r/PrintConfig.cpp:1415
msgid "No extrusion"
msgstr "Geen extrusie"

#: src/libslic3r/PrintConfig.cpp:1421
msgid "Label objects"
msgstr "Label objecten"

#: src/libslic3r/PrintConfig.cpp:1422
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""
"Schakel dit in om opmerkingen in de G-code toe te voegen voor bewegingen die "
"behoren tot een object. Dit is handig voor de OctoPrint CancelObject-plugin. "
"Deze instelling is NIET compatibel met een multi-materialsetup met één "
"extruder en 'Afvegen in object' en 'Afvegen in vulling'."

#: src/libslic3r/PrintConfig.cpp:1429
msgid "G-code substitutions"
msgstr "G-code-substituties"

#: src/libslic3r/PrintConfig.cpp:1430
msgid "Find / replace patterns in G-code lines and substitute them."
msgstr "Zoek / vervang patronen in G-coderegels en substitueer ze."

#: src/libslic3r/PrintConfig.cpp:1435
msgid "High extruder current on filament swap"
msgstr "Hoge stroomsterkte bij extruder voor filamentwissel"

#: src/libslic3r/PrintConfig.cpp:1436
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"Het kan nuttig zijn om de stroomsterkte van de extrudermotor te verhogen "
"tijdens het uitvoeren van de filamentwisseling om snelle ramming mogelijk te "
"maken en om weerstand te overwinnen tijdens het laden van filament met een "
"misvormde kop."

#: src/libslic3r/PrintConfig.cpp:1444
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor de vulling. Als dit is "
"ingesteld op 0, wordt de acceleratiecontrole uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:1453
msgid ""
"This is the acceleration your printer will use for solid infill. Set zero to "
"use the value for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1462
msgid ""
"This is the acceleration your printer will use for top solid infill. Set "
"zero to use the value for solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1471
msgid ""
"This is the acceleration your printer will use for travel moves. Set zero to "
"disable acceleration control for travel."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1479
msgid "Combine infill every"
msgstr "Combineer vulling elke"

#: src/libslic3r/PrintConfig.cpp:1481
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"Deze optie staat vullingslagen combineren toe voor een snellere print door "
"de vullingslagen stapsgewijs dikker te maken, terwijl de laagdikte van "
"perimeters behouden wordt."

#: src/libslic3r/PrintConfig.cpp:1484
msgid "Combine infill every n layers"
msgstr "Combineer vulling elke n lagen"

#: src/libslic3r/PrintConfig.cpp:1490
msgid "Length of the infill anchor"
msgstr "Lengte van de vullingsbevestiging"

#: src/libslic3r/PrintConfig.cpp:1492
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""
"Verbind een vullingslijn van een interne perimeter met een kort segment van "
"een extra perimeter. Als dit wordt uitgedrukt als percentage (bijvoorbeeld: "
"15%), wordt dit genomen over de extrusiebreedte van de vulling. PrusaSlicer "
"probeert twee korte vullingslijnen te verbinden met een kort "
"perimetersegment. Als een perimetersegment niet korter is dan deze "
"parameter, dan wordt de vullingslijn aan slechts één zijde verbonden met een "
"perimetersegment en de lengte van het perimetersegment wordt gelimiteerd tot "
"deze parameter, maar niet langer dan \"anchor_length_max\". Stel in op 0 om "
"uit te zetten."

#: src/libslic3r/PrintConfig.cpp:1502
msgid "0 (no open anchors)"
msgstr "0 (geen losse bevestiging)"

#: src/libslic3r/PrintConfig.cpp:1503 src/libslic3r/PrintConfig.cpp:1526
msgid "1 mm"
msgstr "1 mm"

#: src/libslic3r/PrintConfig.cpp:1504 src/libslic3r/PrintConfig.cpp:1527
msgid "2 mm"
msgstr "2 mm"

#: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1528
msgid "5 mm"
msgstr "5 mm"

#: src/libslic3r/PrintConfig.cpp:1506 src/libslic3r/PrintConfig.cpp:1529
msgid "10 mm"
msgstr "10 mm"

#: src/libslic3r/PrintConfig.cpp:1507 src/libslic3r/PrintConfig.cpp:1530
msgid "1000 (unlimited)"
msgstr "1000 (ongelimiteerd)"

#: src/libslic3r/PrintConfig.cpp:1513
msgid "Maximum length of the infill anchor"
msgstr "Maximale lengte van de vullingsbevestiging"

#: src/libslic3r/PrintConfig.cpp:1515
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""
"Verbind een vullingslijn van een interne perimeter met een kort segment van "
"een extra perimeter. Als dit wordt uitgedrukt als percentage (bijvoorbeeld: "
"15%), wordt dit genomen over de extrusiebreedte van de vulling. PrusaSlicer "
"probeert twee korte vullingslijnen te verbinden met een kort "
"perimetersegment. Als zo een perimetersegment niet korter is dan "
"\"infill_anchor_max\"-instelling, dan wordt de vullingslijn aan slechts één "
"zijde verbonden met een perimetersegment en de lengte van het "
"perimetersegment wordt gelimiteerd tot \"infill_anchor\", maar niet langer "
"dan deze parameter. Stel in op 0 om uit te zetten."

#: src/libslic3r/PrintConfig.cpp:1525
msgid "0 (not anchored)"
msgstr "0 (niet bevestigd)"

#: src/libslic3r/PrintConfig.cpp:1536
msgid "Infill extruder"
msgstr "Vullingsextruder"

#: src/libslic3r/PrintConfig.cpp:1538
msgid "The extruder to use when printing infill."
msgstr "De extruder die gebruikt wordt voor het printen van de vulling."

#: src/libslic3r/PrintConfig.cpp:1546
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Stel dit in op een niet-nulwaarde om handmatige extrusiebreedte in te "
"stellen. Als die op 0 blijft staan, zal PrusaSlicer de breedte instellen op "
"1,125x de nozzlediameter. Mogelijk wilt u de vulling wat sneller laten "
"printen en het onderdeel sterker maken met deze optie. Als dit is uitgedrukt "
"als percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1557
msgid "Infill before perimeters"
msgstr "Vulling vóór perimeters"

#: src/libslic3r/PrintConfig.cpp:1558
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""
"Deze optie verandert de printvolgorde van perimeters en vulling; de "
"laatstgenoemde eerst."

#: src/libslic3r/PrintConfig.cpp:1572
msgid "Infill/perimeters overlap"
msgstr "Overlapping van vulling/perimeters"

#: src/libslic3r/PrintConfig.cpp:1574
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"Deze instelling zorgt voor een extra overlapping tussen vulling en "
"perimeters voor een betere hechting. Theoretisch gezien is dit niet nodig, "
"maar terugslag kan zorgen voor gaten. Als dit is uitgedrukt als percentage, "
"wordt dit berekend over de extrusiebreedte van de perimeters."

#: src/libslic3r/PrintConfig.cpp:1585
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""
"Printsnelheid voor vulling. Als dit ingesteld is op 0, wordt de snelheid "
"automatisch berekend."

#: src/libslic3r/PrintConfig.cpp:1593
msgid "Inherits profile"
msgstr "Afgeleid profiel"

#: src/libslic3r/PrintConfig.cpp:1594
msgid "Name of the profile, from which this profile inherits."
msgstr "Profielnaam waar profiel op is gebaseerd."

#: src/libslic3r/PrintConfig.cpp:1607
msgid "Interface shells"
msgstr "Interfaceshells"

#: src/libslic3r/PrintConfig.cpp:1608
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"Forceer de generatie van dichte shells tussen aangrenzende materialen/"
"volumes. Dit is handig voor multi-extruderprints met transparante materialen "
"of handmatig oplosbaar support."

#: src/libslic3r/PrintConfig.cpp:1616
msgid "Maximum width of a segmented region"
msgstr "Maximale breedte van een gesegmenteerd gebied"

#: src/libslic3r/PrintConfig.cpp:1617
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr ""
"Maximale breedte van een gesegmenteerd gebied. Stel in op 0 om uit te "
"schakelen."

#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:2227
#: src/libslic3r/PrintConfig.cpp:2236
msgid "mm (zero to disable)"
msgstr "mm (stel in op 0 om uit te schakelen)"

#: src/libslic3r/PrintConfig.cpp:1625
msgid "Enable ironing"
msgstr "Sta strijken toe"

#: src/libslic3r/PrintConfig.cpp:1626
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""
"Sta strijken van de toplagen toe met het hete hotend voor een gladder "
"oppervlak"

#: src/libslic3r/PrintConfig.cpp:1632 src/libslic3r/PrintConfig.cpp:1634
msgid "Ironing Type"
msgstr "Strijktype"

#: src/libslic3r/PrintConfig.cpp:1636
msgid "All top surfaces"
msgstr "Alle bovenvlakken"

#: src/libslic3r/PrintConfig.cpp:1637
msgid "Topmost surface only"
msgstr "Alleen bovenste vlak"

#: src/libslic3r/PrintConfig.cpp:1638
msgid "All solid surfaces"
msgstr "Alle dichte vlakken"

#: src/libslic3r/PrintConfig.cpp:1644
msgid "Flow rate"
msgstr "Debiet"

#: src/libslic3r/PrintConfig.cpp:1646
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""
"Percentage van het debiet ten opzichte van de standaard laagdikte van het "
"model."

#: src/libslic3r/PrintConfig.cpp:1654
msgid "Spacing between ironing passes"
msgstr "Ruimte tussen strijkpassages"

#: src/libslic3r/PrintConfig.cpp:1656
msgid "Distance between ironing lines"
msgstr "Afstand tussen strijkpaden"

#: src/libslic3r/PrintConfig.cpp:1673
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"Deze custom code wordt ingevoegd bij elke laagwisseling, direct na de Z-"
"beweging en voor de extruder naar het volgende punt beweegt. Hier kunt u "
"variabelen gebruiken voor alle instellingen zoals 'layer_num' en 'layer_z'."

#: src/libslic3r/PrintConfig.cpp:1684
msgid "Supports remaining times"
msgstr "Ondersteunt resterende tijd"

#: src/libslic3r/PrintConfig.cpp:1685
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"Zet M73 P[geprint percentage] R[resterende tijd in minuten] na elke minuut "
"in de G-code om de firmware de exacte resterende tijd te laten weten. Vanaf "
"nu herkent de Prusa i3 MK3 de M73-commando's. Ook ondersteunt de i3 MK3 "
"firmware M73 Qxx Sxx voor de stille modus."

#: src/libslic3r/PrintConfig.cpp:1693
msgid "Supports stealth mode"
msgstr "Ondersteunt stille modus"

#: src/libslic3r/PrintConfig.cpp:1694
msgid "The firmware supports stealth mode"
msgstr "De firmware ondersteunt stille modus"

#: src/libslic3r/PrintConfig.cpp:1699
msgid "How to apply limits"
msgstr "Hoe limieten toe te voegen"

#: src/libslic3r/PrintConfig.cpp:1700
msgid "Purpose of Machine Limits"
msgstr "Doel van de machinelimieten"

#: src/libslic3r/PrintConfig.cpp:1702
msgid "How to apply the Machine Limits"
msgstr "Hoe machinelimieten toe te voegen"

#: src/libslic3r/PrintConfig.cpp:1704
msgid "Emit to G-code"
msgstr "Invoegen in de G-code"

#: src/libslic3r/PrintConfig.cpp:1705
msgid "Use for time estimate"
msgstr "Gebruik om tijd te schatten"

#: src/libslic3r/PrintConfig.cpp:1706
msgid "Ignore"
msgstr "Negeren"

#: src/libslic3r/PrintConfig.cpp:1730
msgid "Maximum feedrate X"
msgstr "Maximale snelheid van de X-as"

#: src/libslic3r/PrintConfig.cpp:1731
msgid "Maximum feedrate Y"
msgstr "Maximale snelheid van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1732
msgid "Maximum feedrate Z"
msgstr "Maximale snelheid van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1733
msgid "Maximum feedrate E"
msgstr "Maximale extrusiesnelheid"

#: src/libslic3r/PrintConfig.cpp:1736
msgid "Maximum feedrate of the X axis"
msgstr "Maximale snelheid van de X-as"

#: src/libslic3r/PrintConfig.cpp:1737
msgid "Maximum feedrate of the Y axis"
msgstr "Maximale snelheid van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1738
msgid "Maximum feedrate of the Z axis"
msgstr "Maximale snelheid van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1739
msgid "Maximum feedrate of the E axis"
msgstr "Maximale extrusiesnelheid"

#: src/libslic3r/PrintConfig.cpp:1747
msgid "Maximum acceleration X"
msgstr "Maximale acceleratie X"

#: src/libslic3r/PrintConfig.cpp:1748
msgid "Maximum acceleration Y"
msgstr "Maximale acceleratie Y"

#: src/libslic3r/PrintConfig.cpp:1749
msgid "Maximum acceleration Z"
msgstr "Maximale acceleratie Z"

#: src/libslic3r/PrintConfig.cpp:1750
msgid "Maximum acceleration E"
msgstr "Maximale acceleratie E"

#: src/libslic3r/PrintConfig.cpp:1753
msgid "Maximum acceleration of the X axis"
msgstr "Maximale acceleratie van de X-as"

#: src/libslic3r/PrintConfig.cpp:1754
msgid "Maximum acceleration of the Y axis"
msgstr "Maximale acceleratie van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1755
msgid "Maximum acceleration of the Z axis"
msgstr "Maximale acceleratie van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1756
msgid "Maximum acceleration of the E axis"
msgstr "Maximale extrusie-acceleratie"

#: src/libslic3r/PrintConfig.cpp:1764
msgid "Maximum jerk X"
msgstr "Maximale ruk X"

#: src/libslic3r/PrintConfig.cpp:1765
msgid "Maximum jerk Y"
msgstr "Maximale ruk Y"

#: src/libslic3r/PrintConfig.cpp:1766
msgid "Maximum jerk Z"
msgstr "Maximale ruk Z"

#: src/libslic3r/PrintConfig.cpp:1767
msgid "Maximum jerk E"
msgstr "Maximale ruk E"

#: src/libslic3r/PrintConfig.cpp:1770
msgid "Maximum jerk of the X axis"
msgstr "Maximale ruk van de X-as"

#: src/libslic3r/PrintConfig.cpp:1771
msgid "Maximum jerk of the Y axis"
msgstr "Maximale ruk van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1772
msgid "Maximum jerk of the Z axis"
msgstr "Maximale ruk van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1773
msgid "Maximum jerk of the E axis"
msgstr "Maximale extrusie-ruk"

#: src/libslic3r/PrintConfig.cpp:1783
msgid "Minimum feedrate when extruding"
msgstr "Minimale snelheid tijdens extruderen"

#: src/libslic3r/PrintConfig.cpp:1785
msgid "Minimum feedrate when extruding (M205 S)"
msgstr "Minimale snelheid tijdens extruderen (M205 S)"

#: src/libslic3r/PrintConfig.cpp:1793
msgid "Minimum travel feedrate"
msgstr "Minimale snelheid voor bewegingen"

#: src/libslic3r/PrintConfig.cpp:1795
msgid "Minimum travel feedrate (M205 T)"
msgstr "Minimale snelheid voor bewegingen (M205 T)"

#: src/libslic3r/PrintConfig.cpp:1803 src/libslic3r/PrintConfig.cpp:1805
msgid "Maximum acceleration when extruding"
msgstr "Maximale acceleratie tijdens extruderen"

#: src/libslic3r/PrintConfig.cpp:1814
msgid "Maximum acceleration when retracting"
msgstr "Maximale acceleratie tijdens retracten"

#: src/libslic3r/PrintConfig.cpp:1816
msgid ""
"Maximum acceleration when retracting.\n"
"\n"
"Not used for RepRapFirmware, which does not support it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1825
msgid "Maximum acceleration for travel moves"
msgstr "Maximale acceleratie voor bewegingen"

#: src/libslic3r/PrintConfig.cpp:1827
msgid "Maximum acceleration for travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1834 src/libslic3r/PrintConfig.cpp:1843
msgid "Max"
msgstr "Max"

#: src/libslic3r/PrintConfig.cpp:1835
msgid "This setting represents the maximum speed of your fan."
msgstr "Deze instelling gaat over de maximale snelheid van uw ventilator."

#: src/libslic3r/PrintConfig.cpp:1844
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"Dit is de dikst printbare laag voor deze extruder, gebruikt voor de "
"variabele laagdikte en supportlaagdikte. Maximaal aanbevolen laagdikte is "
"75% van de extrusiebreedte voor een goede interfacehechting. Als dit op 0 "
"staat, wordt de hoogte gelimiteerd tot 75% van de nozzlediameter."

#: src/libslic3r/PrintConfig.cpp:1854
msgid "Max print speed"
msgstr "Maximale printsnelheid"

#: src/libslic3r/PrintConfig.cpp:1855
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"Als de alle snelheidsinstellingen op 0 staan, berekent PrusaSlicer "
"automatisch de optimale snelheid voor een constante extrusiedruk. Deze "
"experimentele instelling wordt gebruikt voor de hoogste printsnelheid die u "
"toestaat."

#: src/libslic3r/PrintConfig.cpp:1865
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""
"Deze experimentele instelling wordt gebruikt voor de maximale volumetrische "
"snelheid van de extruder."

#: src/libslic3r/PrintConfig.cpp:1873
msgid "Max volumetric slope positive"
msgstr "Maximale volumetrische stijging"

#: src/libslic3r/PrintConfig.cpp:1874
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
"(feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"Deze experimentele instelling wordt gebruikt om de extrusiesnelheidsratio te "
"limiteren voor een transitie van lage tot hoge snelheid. Een waarde van 1,8 "
"mm³/s² verzekert dat een wijziging in extrusieratio van 1,8 mm³/s (0,45 mm "
"extrusiebreedte, 0,2 mm laagdikte, voedingssnelheid 20 mm/s) naar 5,4 mm³/s "
"(voedingssnelheid 60 mm/s) tenminste 2 seconden duurt."

#: src/libslic3r/PrintConfig.cpp:1879 src/libslic3r/PrintConfig.cpp:1891
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1885
msgid "Max volumetric slope negative"
msgstr "Maximale volumetrische daling"

#: src/libslic3r/PrintConfig.cpp:1886
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
"(feedrate 20 mm/s) will take at least 2 seconds."
msgstr ""
"Deze experimentele instelling wordt gebruikt om de extrusiesnelheidsratio te "
"limiteren voor een transitie van hoge tot lage snelheid. Een waarde van 1,8 "
"mm³/s² verzekert dat een wijziging in extrusieratio van 5,4 mm³/s (0,45 mm "
"extrusiebreedte, 0,2 mm laagdikte, voedingssnelheid 60 mm/s) naar 1,8 mm³/s "
"(voedingssnelheid 20 mm/s) tenminste 2 seconden duurt."

#: src/libslic3r/PrintConfig.cpp:1897 src/libslic3r/PrintConfig.cpp:1906
msgid "Min"
msgstr "Min"

#: src/libslic3r/PrintConfig.cpp:1898
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""
"Deze instelling geeft de minimale snelheid van uw ventilator aan waarbij de "
"ventilator draait."

#: src/libslic3r/PrintConfig.cpp:1907
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"Dit is de kleinst printbare laagdikte voor deze extruder en limiteert de "
"resolutie voor variabele laagdikte. Typische waarden zijn tussen 0,05 en 0,1 "
"mm."

#: src/libslic3r/PrintConfig.cpp:1915
msgid "Min print speed"
msgstr "Minimale printsnelheid"

#: src/libslic3r/PrintConfig.cpp:1916
msgid "Slic3r will not scale speed down below this speed."
msgstr ""
"PrusaSlicer zal de printsnelheid niet verlagen tot onder deze snelheid."

#: src/libslic3r/PrintConfig.cpp:1923
msgid "Minimal filament extrusion length"
msgstr "Minimale extrusielengte"

#: src/libslic3r/PrintConfig.cpp:1924
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"Genereer meer dan dit aantal skirtlijnen dat nodig is om de aangegeven "
"hoeveelheid filament op de eerste laag te verbruiken. Voor multi-"
"extruderprinters is dit het minimum voor elke extruder."

#: src/libslic3r/PrintConfig.cpp:1933
msgid "Configuration notes"
msgstr "Configuratie-opmerkingen"

#: src/libslic3r/PrintConfig.cpp:1934
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"Hier kunt u eigen opmerkingen plaatsen. Deze tekst wordt bovenin de G-code "
"toegevoegd."

#: src/libslic3r/PrintConfig.cpp:1944
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "Dit is de diameter van uw extruder-nozzle (bijvoorbeeld 0.4)"

#: src/libslic3r/PrintConfig.cpp:1949
msgid "Host Type"
msgstr "Hosttype"

#: src/libslic3r/PrintConfig.cpp:1950
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"PrusaSlicer kan .gcode-bestanden uploaden naar een printerhost. Dit veld "
"moet het type host bevatten."

#: src/libslic3r/PrintConfig.cpp:1968
msgid "Only retract when crossing perimeters"
msgstr "Alleen retracten bij kruisende perimeters"

#: src/libslic3r/PrintConfig.cpp:1969
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"Schakelt retracten uit als de bewegingspaden de perimeters van de bovenste "
"laag niet overschrijdt (en maakt eventueel druipen dus onzichtbaar)."

#. TRN PrintSettings: Enable ooze prevention
#: src/libslic3r/PrintConfig.cpp:1977
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1982
msgid "Output filename format"
msgstr "Formaat van bestandsnaam"

#: src/libslic3r/PrintConfig.cpp:1983
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"U kunt alle instellingen gebruiken in deze template. U kunt hier ook andere "
"variabelen gebruiken, zoals 'layer_height', 'fill_density', 'timestamp', "
"'year', 'month', 'day', 'hour', 'minute', 'second', 'version', "
"'input_filename', 'input_filename_base', etc."

#: src/libslic3r/PrintConfig.cpp:1992
msgid "Detect bridging perimeters"
msgstr "Detecteer brugperimeters"

#: src/libslic3r/PrintConfig.cpp:1994
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"Experimentele optie om het debiet voor overhanging aan te passen. Het debiet "
"voor bruggen wordt aangehouden, evenals de printsnelheid en de koeling."

#: src/libslic3r/PrintConfig.cpp:2000
msgid "Filament parking position"
msgstr "Filament parkeerpositie"

#: src/libslic3r/PrintConfig.cpp:2001
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""
"Afstand van de nozzlepunt tot de positie waar het filament wordt geparkeerd "
"wanneer dat niet geladen is. Deze moet overeenkomen met de waarde in de "
"firmware."

#: src/libslic3r/PrintConfig.cpp:2009
msgid "Extra loading distance"
msgstr "Extra laadafstand"

#: src/libslic3r/PrintConfig.cpp:2010
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""
"Als dit ingesteld is op 0, zal de afstand die het filament tijdens het laden "
"uit de parkeerpositie even groot zijn als wanneer het filament "
"teruggetrokken wordt. Als de waarde positief is, zal het verder geladen "
"worden. Als het negatief is, is de laadafstand dus korter."

#: src/libslic3r/PrintConfig.cpp:2018 src/libslic3r/PrintConfig.cpp:2043
#: src/libslic3r/PrintConfig.cpp:2057 src/libslic3r/PrintConfig.cpp:2067
msgid "Perimeters"
msgstr "Perimeters"

#: src/libslic3r/PrintConfig.cpp:2019
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor de perimeters. Als dit is "
"ingesteld op 0, wordt de acceleratiecontrole uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:2027
msgid ""
"This is the acceleration your printer will use for external perimeters. Set "
"zero to use the value for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2034
msgid "Perimeter extruder"
msgstr "Perimeterextruder"

#: src/libslic3r/PrintConfig.cpp:2036
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""
"De extruder die gebruikt wordt voor het printen van perimeters en de brim."

#: src/libslic3r/PrintConfig.cpp:2045
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de perimeters. Dit kan gebruikt worden voor nauwkeurigere details. Als dit "
"op 0 blijft staan, zal PrusaSlicer de breedte instellen op 1,125x de "
"nozzlediameter. Als dit is uitgedrukt als percentage, wordt dit berekend "
"over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:2059
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""
"Printsnelheid voor de perimeters (contouren, ook wel bekend als verticale "
"shells). Als dit ingesteld is op 0, wordt een automatische snelheid genomen."

#: src/libslic3r/PrintConfig.cpp:2069
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"Instelling voor het te genereren aantal perimeters per laag. PrusaSlicer kan "
"dit aantal verhogen als het schuine vlakken detecteert die gebruik maken van "
"een hoger aantal perimeters als de optie voor extra perimeters is "
"ingeschakeld."

#: src/libslic3r/PrintConfig.cpp:2073
msgid "(minimum)"
msgstr "(minimum)"

#: src/libslic3r/PrintConfig.cpp:2081
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"Als u de output-G-code via custom scripts wilt verwerken, hoeft u alleen de "
"paden hier te plaatsen. Scheid meerdere scripts met een puntkomma. Scripts "
"krijgen als eerste argument het pad naar het .gcode-bestand. Ze hebben ook "
"toegang tot de configuratie-instellingen door het lezen van variabelen."

#: src/libslic3r/PrintConfig.cpp:2093
msgid "Printer type"
msgstr "Printertype"

#: src/libslic3r/PrintConfig.cpp:2094
msgid "Type of the printer."
msgstr "Type van de printer."

#: src/libslic3r/PrintConfig.cpp:2099
msgid "Printer notes"
msgstr "Printeropmerkingen"

#: src/libslic3r/PrintConfig.cpp:2100
msgid "You can put your notes regarding the printer here."
msgstr "Hier kunnen opmerkingen over de printer geplaatst worden."

#: src/libslic3r/PrintConfig.cpp:2108
msgid "Printer vendor"
msgstr "Printerleverancier"

#: src/libslic3r/PrintConfig.cpp:2109
msgid "Name of the printer vendor."
msgstr "Naam van de printerleverancier."

#: src/libslic3r/PrintConfig.cpp:2114
msgid "Printer variant"
msgstr "Printervariant"

#: src/libslic3r/PrintConfig.cpp:2115
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""
"Naam van de printervariant. De nozzlediameter kan bijvoorbeeld afwijken voor "
"verschillende varianten."

#: src/libslic3r/PrintConfig.cpp:2132
msgid "Raft contact Z distance"
msgstr "Z-afstand voor raft"

#: src/libslic3r/PrintConfig.cpp:2134
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr ""
"De verticale afstand tussen object en raft. Wordt genegeerd bij oplosbare "
"interface."

#: src/libslic3r/PrintConfig.cpp:2141
msgid "Raft expansion"
msgstr "Raftuitbreiding"

#: src/libslic3r/PrintConfig.cpp:2143
msgid "Expansion of the raft in XY plane for better stability."
msgstr "Uitbreiding van de raft in het XY-vlak voor betere stabiliteit."

#: src/libslic3r/PrintConfig.cpp:2150
msgid "First layer density"
msgstr "Dichtheid eerste laag"

#: src/libslic3r/PrintConfig.cpp:2152
msgid "Density of the first raft or support layer."
msgstr "Dichtheid van de eerste raft- of supportlaag."

#: src/libslic3r/PrintConfig.cpp:2160
msgid "First layer expansion"
msgstr "Uitbreiding van eerste laag"

#: src/libslic3r/PrintConfig.cpp:2162
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr ""
"Uitbreiding van de eerste raft- of supportlaag voor verbetering van de "
"bedhechting."

#: src/libslic3r/PrintConfig.cpp:2169
msgid "Raft layers"
msgstr "Raftlagen"

#: src/libslic3r/PrintConfig.cpp:2171
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""
"Het object wordt verhoogd met dit aantal lagen. Support wordt onder het "
"object gegenereerd."

#: src/libslic3r/PrintConfig.cpp:2179
msgid "Slice resolution"
msgstr "Slice-resolutie"

#: src/libslic3r/PrintConfig.cpp:2180
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"Minimale resolutie van details. Dit wordt gebruikt om het geïmporteerde "
"bestand sneller te slicen, evenals de grootte van de G-code. Modellen met "
"een hoge resolutie vragen meer van een printer dan mogelijk. Als dit "
"ingesteld is op 0, wordt simplificatie uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:2190
msgid "G-code resolution"
msgstr "G-code-resolutie"

#: src/libslic3r/PrintConfig.cpp:2191
msgid ""
"Maximum deviation of exported G-code paths from their full resolution "
"counterparts. Very high resolution G-code requires huge amount of RAM to "
"slice and preview, also a 3D printer may stutter not being able to process a "
"high resolution G-code in a timely manner. On the other hand, a low "
"resolution G-code will produce a low poly effect and because the G-code "
"reduction is performed at each layer independently, visible artifacts may be "
"produced."
msgstr ""
"Maximale afwijking van geëxporteerde G-code-paden van de originele "
"resolutie. Hele hoge G-code-resolutie vereist een groot RAM-geheugen om te "
"slicen en weer te geven. Ook kan de 3D-printer problemen veroorzaken doordat "
"een hoge resolutie niet snel genoeg verwerkt kan worden. Aan de andere kant "
"kan een te lage resolutie zorgen voor een low-poly effect en omdat de G-code-"
"reductie is toegepast per laag, kan dit zorgen voor oneffenheden tijdens het "
"printen."

#: src/libslic3r/PrintConfig.cpp:2202
msgid "Minimum travel after retraction"
msgstr "Minimale beweging na retracten"

#: src/libslic3r/PrintConfig.cpp:2203
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""
"Retracten is niet geactiveerd als bewegingen korter zijn dan de hier "
"ingevoerde lengte."

#: src/libslic3r/PrintConfig.cpp:2209
msgid "Retract amount before wipe"
msgstr "Retracthoeveelheid voor het afvegen"

#: src/libslic3r/PrintConfig.cpp:2210
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"Met bowden-extruders is het verstandig om een aantal maal snel te retracten "
"voor het afvegen."

#: src/libslic3r/PrintConfig.cpp:2217
msgid "Retract on layer change"
msgstr "Retracten bij laagwisselingen"

#: src/libslic3r/PrintConfig.cpp:2218
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "Dit vinkje geeft aan of wordt teruggetrokken bij een Z-beweging."

#: src/libslic3r/PrintConfig.cpp:2224
msgid "Retraction Length"
msgstr "Retractielengte"

#: src/libslic3r/PrintConfig.cpp:2225
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"Als retracten is geactiveerd, wordt filament teruggetrokken op de ingestelde "
"waarde (filamentlengte voor het de extruder in gaat)."

#: src/libslic3r/PrintConfig.cpp:2232
msgid "Retraction Length (Toolchange)"
msgstr "Retractielengte (toolwissel)"

#: src/libslic3r/PrintConfig.cpp:2233
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"Als retracten is geactiveerd voor toolwisseling wordt filament "
"teruggetrokken op de ingestelde waarde (filamentlengte voor het de extruder "
"in gaat)."

#: src/libslic3r/PrintConfig.cpp:2241
msgid "Lift Z"
msgstr "Beweeg Z omhoog"

#: src/libslic3r/PrintConfig.cpp:2242
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"Als u dit instelt op een positieve waarde, beweegt de nozzle telkens "
"enigszins omhoog bij het retracten. Als meerdere extruders worden gebruikt, "
"wordt alleen de instelling van de eerste extruder aangehouden."

#: src/libslic3r/PrintConfig.cpp:2249
msgid "Above Z"
msgstr "Boven Z"

#: src/libslic3r/PrintConfig.cpp:2250
msgid "Only lift Z above"
msgstr "Beweeg Z alleen omhoog boven"

#: src/libslic3r/PrintConfig.cpp:2251
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"Als dit ingesteld is op een positieve waarde, zal de nozzle alleen boven de "
"ingestelde waarde omhoog bewegen voor het retracten. Deze kan aangepast "
"worden om warping te voorkomen bij de eerste lagen."

#: src/libslic3r/PrintConfig.cpp:2258
msgid "Below Z"
msgstr "Onder Z"

#: src/libslic3r/PrintConfig.cpp:2259
msgid "Only lift Z below"
msgstr "Beweeg Z alleen omhoog onder"

#: src/libslic3r/PrintConfig.cpp:2260
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"Als dit ingesteld is op een positieve waarde, zal de nozzle alleen onder de "
"ingestelde waarde omhoog bewegen bij het retracten."

#: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:2276
msgid "Extra length on restart"
msgstr "Extra lengte bij herstart"

#: src/libslic3r/PrintConfig.cpp:2269
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"Als retracten wordt gecompenseerd na een beweging, wordt deze extra "
"hoeveelheid filament geëxtrudeerd. Deze instelling is zelden van toepassing."

#: src/libslic3r/PrintConfig.cpp:2277
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""
"Als retracten wordt gecompenseerd na een toolwisseling, wordt deze extra "
"hoeveelheid filament geëxtrudeerd."

#: src/libslic3r/PrintConfig.cpp:2284 src/libslic3r/PrintConfig.cpp:2285
msgid "Retraction Speed"
msgstr "Retractiesnelheid"

#: src/libslic3r/PrintConfig.cpp:2286
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "De snelheid voor retracties (geldt alleen voor de extrudermotor)."

#: src/libslic3r/PrintConfig.cpp:2292 src/libslic3r/PrintConfig.cpp:2293
msgid "Deretraction Speed"
msgstr "Deretractiesnelheid"

#: src/libslic3r/PrintConfig.cpp:2294
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"De laadsnelheid van filament in de extruder na het retracten (geldt alleen "
"voor de extrudermotor). Als dit ingesteld is op 0, wordt de "
"retractiesnelheid gebruikt."

#: src/libslic3r/PrintConfig.cpp:2301
msgid "Seam position"
msgstr "Naadpositie"

#: src/libslic3r/PrintConfig.cpp:2303
msgid "Position of perimeters starting points."
msgstr "Startpuntpositie van perimeters."

#: src/libslic3r/PrintConfig.cpp:2306
msgid "Nearest"
msgstr "Dichtstbijzijnd"

#: src/libslic3r/PrintConfig.cpp:2307
msgid "Aligned"
msgstr "Uitgelijnd"

#: src/libslic3r/PrintConfig.cpp:2314
msgid "Staggered inner seams"
msgstr ""

#. TRN PrintSettings: "Staggered inner seams"
#: src/libslic3r/PrintConfig.cpp:2316
msgid ""
"This option causes the inner seams to be shifted backwards based on their "
"depth, forming a zigzag pattern."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2323
msgid "Direction"
msgstr "Richting"

#: src/libslic3r/PrintConfig.cpp:2325
msgid "Preferred direction of the seam"
msgstr "Richtingsvoorkeur voor de naad"

#: src/libslic3r/PrintConfig.cpp:2326
msgid "Seam preferred direction"
msgstr "Richtingsvoorkeur voor de naad"

#: src/libslic3r/PrintConfig.cpp:2333
msgid "Jitter"
msgstr "Jitter"

#: src/libslic3r/PrintConfig.cpp:2335
msgid "Seam preferred direction jitter"
msgstr "Voorkeursrichting voor de naad - jitter"

#: src/libslic3r/PrintConfig.cpp:2336
msgid "Preferred direction of the seam - jitter"
msgstr "Voorkeursrichting voor de naad - jitter"

#: src/libslic3r/PrintConfig.cpp:2343
msgid "Distance from brim/object"
msgstr "Afstand van brim en object"

#: src/libslic3r/PrintConfig.cpp:2344
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr ""
"Afstand tussen de skirt en de brim of objecten (wanneer tochtscherm niet "
"wordt gebruikt)."

#: src/libslic3r/PrintConfig.cpp:2350
msgid "Skirt height"
msgstr "Skirthoogte"

#: src/libslic3r/PrintConfig.cpp:2351
msgid "Height of skirt expressed in layers."
msgstr "Hoogte van de skirt uitgedrukt in het aantal lagen."

#: src/libslic3r/PrintConfig.cpp:2357
msgid "Draft shield"
msgstr "Tochtscherm"

#: src/libslic3r/PrintConfig.cpp:2358
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""
"De skirt wordt geprint op skirt_distance van het object met tochtscherm "
"actief, maar doorkruist mogelijk de brim.\n"
"Aan = skirt is net zo hoog als het hoogste object.\n"
"Gelimiteerd = skirt is net zo hoog als skirt_height.\n"
"Dit is handig om een ABS of ASA print te beschermen tegen opkrullen en "
"loslaten van het printbed door tocht."

#: src/libslic3r/PrintConfig.cpp:2363
msgid "Disabled"
msgstr "Uit"

#: src/libslic3r/PrintConfig.cpp:2364
msgid "Limited"
msgstr "Gelimiteerd"

#: src/libslic3r/PrintConfig.cpp:2365
msgid "Enabled"
msgstr "Aan"

#: src/libslic3r/PrintConfig.cpp:2371
msgid "Loops (minimum)"
msgstr "Rondgangen (minimaal)"

#: src/libslic3r/PrintConfig.cpp:2372
msgid "Skirt Loops"
msgstr "Rondgangen voor de skirt"

#: src/libslic3r/PrintConfig.cpp:2373
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"Het aantal rondgangen van de skirt. Als de minimale extrusielengte is "
"ingesteld kan dit aantal rondgangen groter zijn dan hier is ingesteld. Als "
"dit ingesteld is op 0, wordt de skirt uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:2381
msgid "Slow down if layer print time is below"
msgstr "Vertraag bij een kortere laagprinttijd dan"

#: src/libslic3r/PrintConfig.cpp:2382
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"Als de laagprinttijd wordt berekend onder dit aantal seconden, wordt de "
"printsnelheid verlaagd om de laagprinttijd te verlengen."

#: src/libslic3r/PrintConfig.cpp:2391
msgid "Small perimeters"
msgstr "Smalle perimeters"

#: src/libslic3r/PrintConfig.cpp:2393
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Deze instelling heeft effect op de snelheid van perimeters met een radius "
"die kleiner of gelijk is aan 6.5mm. Als dit is uitgedrukt als percentage, "
"wordt deze genomen over de snelheid van de perimeters. Als dit ingesteld is "
"op 0, wordt een automatische snelheid genomen."

#: src/libslic3r/PrintConfig.cpp:2403
msgid "Solid infill threshold area"
msgstr "Dichte vulling bij oppervlak"

#: src/libslic3r/PrintConfig.cpp:2405
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""
"Forceer dichte vulling voor delen met een kleiner doorsnee-oppervlak dan de "
"hier ingestelde waarde."

#: src/libslic3r/PrintConfig.cpp:2406
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:2412
msgid "Solid infill extruder"
msgstr "Extruder voor dichte vulling"

#: src/libslic3r/PrintConfig.cpp:2414
msgid "The extruder to use when printing solid infill."
msgstr "De extruder die gebruikt wordt voor het printen van dichte vullingen."

#: src/libslic3r/PrintConfig.cpp:2420
msgid "Solid infill every"
msgstr "Dichte vulling elke"

#: src/libslic3r/PrintConfig.cpp:2422
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"Deze optie staat het genereren van een dichte laag tussen het ingestelde "
"aantal lagen toe. Stel in op 0 om dit uit te schakelen. Stel dit in op een "
"waarde; PrusaSlicer zal dan automatisch het maximaal aantal lagen kiezen om "
"te combineren op basis van de nozzlediameter en de laagdikte."

#: src/libslic3r/PrintConfig.cpp:2434
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de vulling van dichte lagen. Als die op 0 blijft staan, zal PrusaSlicer de "
"breedte instellen op 1,125x de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:2446
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"Printsnelheid van dichte delen. Als dit is uitgedrukt als percentage, wordt "
"dit berekend over de standaard vullingssnelheid. Als dit ingesteld is op 0, "
"worden automatische waarden genomen."

#: src/libslic3r/PrintConfig.cpp:2458
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "Aantal te genereren dichte lagen voor boven- en ondervlakken."

#: src/libslic3r/PrintConfig.cpp:2464 src/libslic3r/PrintConfig.cpp:2465
msgid "Minimum thickness of a top / bottom shell"
msgstr "Minimale dikte van top-/bodemshell"

#: src/libslic3r/PrintConfig.cpp:2471
msgid "Spiral vase"
msgstr "Spiraalmodus"

#: src/libslic3r/PrintConfig.cpp:2472
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""
"Deze optie verhoogt de Z-as geleidelijk tijdens het printen van een "
"enkelwandig object om zichtbare naden te voorkomen. Deze optie vereist een "
"enkele perimeter, geen vulling, geen dichte bovenlagen en geen "
"supportmateriaal. U kunt nog wel een aantal bodemlagen instellen, net als "
"skirt- en brimrondgangen. Het werkt niet bij het printen van meer dan één "
"object."

#: src/libslic3r/PrintConfig.cpp:2480
msgid "Temperature variation"
msgstr "Temperatuurverschil"

#. TRN PrintSettings : "Ooze prevention" > "Temperature variation"
#: src/libslic3r/PrintConfig.cpp:2482
msgid ""
"Temperature difference to be applied when an extruder is not active. The "
"value is not used when 'idle_temperature' in filament settings is defined."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2492
msgid "Emit temperature commands automatically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2493
msgid ""
"When enabled, PrusaSlicer will check whether your Custom Start G-Code "
"contains M104 or M190. If so, the temperatures will not be emitted "
"automatically so you're free to customize the order of heating commands and "
"other custom actions. Note that you can use placeholder variables for all "
"PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" "
"command wherever you want.\n"
"If your Custom Start G-Code does NOT contain M104 or M190, PrusaSlicer will "
"execute the Start G-Code after bed reached its target temperature and "
"extruder just started heating.\n"
"\n"
"When disabled, PrusaSlicer will NOT emit commands to heat up extruder and "
"bed, leaving both to Custom Start G-Code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2508
msgid ""
"This start procedure is inserted at the beginning, possibly prepended by "
"temperature-changing commands. See 'autoemit_temperature_commands'."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2518
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""
"Deze startprocedure wordt aan het begin ingevoegd, na een eventuele "
"printerstart G-code (en na een eventuele toolwissel op dit filament in het "
"geval van multi-materialprinters). Dit wordt gebruikt om de instellingen "
"voor een specifieke filament te overschrijven. Als PrusaSlicer M104, M109, "
"M140 of M190 detecteert in de custom codes, zullen dergelijke commando's "
"niet automatisch worden voorgeprogrammeerd, zodat u vrij bent om de volgorde "
"van de verwarmingscommando's en andere aangepaste acties aan te passen. Merk "
"op dat u variabelen kunt gebruiken voor alle PrusaSlicer-instellingen. Als u "
"meerdere extruders hebt, wordt de G-code in de volgorde van de extruders "
"verwerkt."

#: src/libslic3r/PrintConfig.cpp:2534
msgid "Color change G-code"
msgstr "Kleurwissel-G-code"

#: src/libslic3r/PrintConfig.cpp:2535
msgid "This G-code will be used as a code for the color change"
msgstr "Deze G-code wordt gebruikt voor een kleurwisseling"

#: src/libslic3r/PrintConfig.cpp:2544
msgid "This G-code will be used as a code for the pause print"
msgstr "Deze G-code wordt gebruikt bij het pauzeren van de print"

#: src/libslic3r/PrintConfig.cpp:2553
msgid "This G-code will be used as a custom code"
msgstr "Deze G-code wordt gebruikt als custom G-code"

#: src/libslic3r/PrintConfig.cpp:2561
msgid "Single Extruder Multi Material"
msgstr "Multi-material met één extruder"

#: src/libslic3r/PrintConfig.cpp:2562
msgid "The printer multiplexes filaments into a single hot end."
msgstr "De printer mengt filament in een enkele extruder."

#: src/libslic3r/PrintConfig.cpp:2567
msgid "Prime all printing extruders"
msgstr "Veeg alle printextruders af"

#: src/libslic3r/PrintConfig.cpp:2568
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""
"Alle extruders worden afgeveegd aan de voorzijde van het printbed aan het "
"begin van de print als dit is ingeschakeld."

#: src/libslic3r/PrintConfig.cpp:2573
msgid "No sparse layers (EXPERIMENTAL)"
msgstr "Geen smalle lagen (experimenteel)"

#: src/libslic3r/PrintConfig.cpp:2574
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""
"Het afveegblok wordt niet geprint bij lagen zonder toolwisselingen als dit "
"is ingeschakeld. Op lagen met een toolwissel zal de extruder neerwaarts "
"bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele "
"botsingen met de print."

#: src/libslic3r/PrintConfig.cpp:2581
msgid "Slice gap closing radius"
msgstr "Gatvulradius"

#: src/libslic3r/PrintConfig.cpp:2583
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"Gaten die kleiner zijn dan tweemaal de gatvulradius worden opgevuld tijdens "
"het slicen. Het vullen kan zorgen dat de printresolutie minder wordt. Daarom "
"wordt geadviseerd de waarde laag te houden."

#: src/libslic3r/PrintConfig.cpp:2591
msgid "Slicing Mode"
msgstr "Slicemodus"

#: src/libslic3r/PrintConfig.cpp:2593
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""
"Gebruik \"even-oneven\" voor 3DLabPrint vliegtuigmodellen. Gebruik \"Sluit "
"gaten\" om alle gaten in het model te vullen."

#: src/libslic3r/PrintConfig.cpp:2595
msgid "Regular"
msgstr "Normaal"

#: src/libslic3r/PrintConfig.cpp:2596
msgid "Even-odd"
msgstr "Even-oneven"

#: src/libslic3r/PrintConfig.cpp:2597
msgid "Close holes"
msgstr "Sluit gaten"

#: src/libslic3r/PrintConfig.cpp:2603
msgid "Generate support material"
msgstr "Genereer support"

#: src/libslic3r/PrintConfig.cpp:2605
msgid "Enable support material generation."
msgstr "Sta de generatie van support toe."

#: src/libslic3r/PrintConfig.cpp:2609
msgid "Auto generated supports"
msgstr "Automatisch gegenereerd support"

#: src/libslic3r/PrintConfig.cpp:2611
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"Support wordt automatisch gegenereerd als dit aan staat. Als dit niet "
"aanstaat zal support alleen bij supportforceringen gegenereerd worden."

#: src/libslic3r/PrintConfig.cpp:2617
msgid "XY separation between an object and its support"
msgstr "Horizontale ruimte tussen het object en het support"

#: src/libslic3r/PrintConfig.cpp:2619
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"Horizontale ruimte tussen object en support. Als dit is uitgedrukt als "
"percentage, wordt deze berekend over de breedte van de buitenste perimeter."

#: src/libslic3r/PrintConfig.cpp:2630
msgid "Pattern angle"
msgstr "Patroonhoek"

#: src/libslic3r/PrintConfig.cpp:2632
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "Gebruik deze instelling om het patroon van het support te draaien."

#: src/libslic3r/PrintConfig.cpp:2642 src/libslic3r/PrintConfig.cpp:3485
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""
"Genereer alleen support als dit op het bed geplaatst wordt, dus niet op de "
"print zelf."

#: src/libslic3r/PrintConfig.cpp:2647
msgid "Top contact Z distance"
msgstr "Z-afstand aan de bovenkant"

#: src/libslic3r/PrintConfig.cpp:2649
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"De afstand tussen objecten en het support. Stel in op 0 om te voorkomen dat "
"PrusaSlicer bruginstellingen gebruikt voor de eerste laag boven de "
"supportinterface."

#: src/libslic3r/PrintConfig.cpp:2655
msgid "0 (soluble)"
msgstr "0 (oplosbaar)"

#: src/libslic3r/PrintConfig.cpp:2656
msgid "0.1 (detachable)"
msgstr "0,1 (losbreekbaar)"

#: src/libslic3r/PrintConfig.cpp:2657
msgid "0.2 (detachable)"
msgstr "0,2 (losbreekbaar)"

#: src/libslic3r/PrintConfig.cpp:2663
msgid "Bottom contact Z distance"
msgstr "Z-afstand aan de onderkant"

#: src/libslic3r/PrintConfig.cpp:2665
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""
"De verticale afstand tussen de bovenlaag van het object en de support-"
"interface. Als dit ingesteld op 0 zal support_material_contact_distance "
"worden gebruikt voor Z-afstand van zowel onder- als bovenkant."

#. TRN Print Settings: "Bottom contact Z distance". Have to be as short as possible
#. TRN Print Settings: "Bottom interface layers". Have to be as short as possible
#: src/libslic3r/PrintConfig.cpp:2671 src/libslic3r/PrintConfig.cpp:2752
msgid "Same as top"
msgstr "Zelfde als bovenkant"

#: src/libslic3r/PrintConfig.cpp:2679
msgid "Enforce support for the first"
msgstr "Forceer support voor de eerste"

#: src/libslic3r/PrintConfig.cpp:2681
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"Genereer support voor het ingevoerd aantal lagen, tellend vanaf de bodem, "
"ongeacht de plekken waar standaard support al dan niet is toegestaan, "
"waarbij de ingesteld hoek wordt aangehouden. Dit is handig om meer hechting "
"op het bed te verkrijgen bij objecten met een klein contactoppervlak."

#: src/libslic3r/PrintConfig.cpp:2686
msgid "Enforce support for the first n layers"
msgstr "Forceer support voor de eerste n lagen"

#: src/libslic3r/PrintConfig.cpp:2692
msgid "Support material/raft/skirt extruder"
msgstr "Extruder voor support/raft/skirt"

#: src/libslic3r/PrintConfig.cpp:2694
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"De extruder die gebruikt wordt voor support, raft en skirt (stel in op 1 of "
"op 0 om de huidige extruder te gebruiken)."

#: src/libslic3r/PrintConfig.cpp:2703
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"het support. Als die op 0 blijft staan, zal PrusaSlicer de breedte instellen "
"zelf bepalen op basis van de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:2713
msgid "Interface loops"
msgstr "Interface rondgangen"

#: src/libslic3r/PrintConfig.cpp:2715
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""
"Bedek de bovenste interfacelagen van het support met rondgangen. Dit staat "
"standaard uit."

#: src/libslic3r/PrintConfig.cpp:2720
msgid "Support material/raft interface extruder"
msgstr "Extruder voor supportinterfacce en de bovenlaag van de raft"

#: src/libslic3r/PrintConfig.cpp:2722
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"De extruder die gebruikt wordt voor de supportinterface (stel in op hoger "
"dan 1 of op 0 om de huidige extruder te gebruiken voor minder "
"toolwisselingen). Dit heeft ook effect op de raft."

#: src/libslic3r/PrintConfig.cpp:2729
msgid "Top interface layers"
msgstr "Interfacelagen bovenkant"

#: src/libslic3r/PrintConfig.cpp:2731
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr "Aantal interfacelagen tussen het support en het object."

#: src/libslic3r/PrintConfig.cpp:2735 src/libslic3r/PrintConfig.cpp:2753
msgid "0 (off)"
msgstr "0 (uit)"

#: src/libslic3r/PrintConfig.cpp:2736 src/libslic3r/PrintConfig.cpp:2754
msgid "1 (light)"
msgstr "1 (licht)"

#: src/libslic3r/PrintConfig.cpp:2737 src/libslic3r/PrintConfig.cpp:2755
msgid "2 (default)"
msgstr "2 (standaard)"

#: src/libslic3r/PrintConfig.cpp:2738 src/libslic3r/PrintConfig.cpp:2756
msgid "3 (heavy)"
msgstr "3 (zwaar)"

#: src/libslic3r/PrintConfig.cpp:2744
msgid "Bottom interface layers"
msgstr "Interfacelagen onderkant"

#: src/libslic3r/PrintConfig.cpp:2746
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""
"Het aantal interfacelagen tussen de objecten en het supportmateriaal. Stel "
"in op -1 om evenveel lagen als op bovenkant te gebruiken"

#: src/libslic3r/PrintConfig.cpp:2762
msgid "Closing radius"
msgstr "Sluitradius"

#: src/libslic3r/PrintConfig.cpp:2764
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""
"Voor handvaste supports worden supportdelen samengevoegd met een "
"morfologische sluitmethode. Gaten kleiner dan de sluitradius worden gevuld."

#: src/libslic3r/PrintConfig.cpp:2772
msgid "Interface pattern spacing"
msgstr "Tussenafstand voor interface"

#: src/libslic3r/PrintConfig.cpp:2774
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""
"Ruimte tussen lijnen van supportinterface. Als dit ingesteld is op 0, wordt "
"een dichte supportinterface gegenereerd."

#: src/libslic3r/PrintConfig.cpp:2783
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"Printsnelheid van supportinterfacelagen. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de snelheid van het support."

#: src/libslic3r/PrintConfig.cpp:2792
msgid "Pattern"
msgstr "Patroon"

#: src/libslic3r/PrintConfig.cpp:2794
msgid "Pattern used to generate support material."
msgstr "Patroon dat gebruikt wordt voor het support."

#: src/libslic3r/PrintConfig.cpp:2797
msgid "Rectilinear grid"
msgstr "Rechtlijnig raster"

#: src/libslic3r/PrintConfig.cpp:2804
msgid "Interface pattern"
msgstr "Interfacepatroon"

#: src/libslic3r/PrintConfig.cpp:2806
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""
"Patroon dat gebruikt wordt voor supportmateriaal-interface. Standaard voor "
"niet-oplosbaar support is rechtlijnig, terwijl het patroon voor oplosbaar "
"support concentrisch is."

#: src/libslic3r/PrintConfig.cpp:2818
msgid "Pattern spacing"
msgstr "Tussenafstand van het patroon"

#: src/libslic3r/PrintConfig.cpp:2820
msgid "Spacing between support material lines."
msgstr "Afstand tussen supportlijnen."

#: src/libslic3r/PrintConfig.cpp:2829
msgid "Speed for printing support material."
msgstr "Printsnelheid voor support."

#: src/libslic3r/PrintConfig.cpp:2838
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""
"Stijl en vorm van de supportpijlers. Het projecteren van de supports in een "
"regelmatig raster creëert stabielere supports, terwijl handvaste supports "
"materiaal besparen en een lelijk oppervlak reduceert."

#: src/libslic3r/PrintConfig.cpp:2843
msgid "Snug"
msgstr "Handvast"

#: src/libslic3r/PrintConfig.cpp:2844
msgid "Organic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2850
msgid "Synchronize with object layers"
msgstr "Synchroniseer met objectlagen"

#. TRN PrintSettings : "Synchronize with object layers"
#: src/libslic3r/PrintConfig.cpp:2853
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive. This option "
"is only available when top contact Z distance is set to zero."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2860
msgid "Overhang threshold"
msgstr "Maximale overhanghoek"

#: src/libslic3r/PrintConfig.cpp:2862
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"Support wordt niet gegenereerd als de overhanghoek boven de gegeven waarde "
"ligt. In andere woorden; deze waarde geeft de hoek met het bed aan die "
"geprint moet worden met support. Als dit ingesteld is op 0, wordt dit "
"automatisch gedetecteerd (aanbevolen)."

#: src/libslic3r/PrintConfig.cpp:2874
msgid "With sheath around the support"
msgstr "Met schild rond het support"

#: src/libslic3r/PrintConfig.cpp:2876
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"Voeg een schild (één perimeterlijn) rondom het support toe. Dit maakt het "
"support betrouwbaarder maar ook moeilijker te verwijderen."

#: src/libslic3r/PrintConfig.cpp:2882
msgid "Maximum Branch Angle"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Maximum Branch Angle"
#: src/libslic3r/PrintConfig.cpp:2885
msgid ""
"The maximum angle of the branches, when the branches have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle to be able to have more reach."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2894
msgid "Preferred Branch Angle"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
#: src/libslic3r/PrintConfig.cpp:2897
msgid ""
"The preferred angle of the branches, when they do not have to avoid the "
"model. Use a lower angle to make them more vertical and more stable. Use a "
"higher angle for branches to merge faster."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2906
msgid "Tip Diameter"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Tip Diameter"
#: src/libslic3r/PrintConfig.cpp:2909
msgid "Branch tip diameter for organic supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2917
msgid "Branch Diameter"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
#: src/libslic3r/PrintConfig.cpp:2920
msgid ""
"The diameter of the thinnest branches of organic support. Thicker branches "
"are more sturdy. Branches towards the base will be thicker than this."
msgstr ""

#. TRN PrintSettings: #lmFIXME
#: src/libslic3r/PrintConfig.cpp:2930
msgid "Branch Diameter Angle"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
#: src/libslic3r/PrintConfig.cpp:2933
msgid ""
"The angle of the branches' diameter as they gradually become thicker towards "
"the bottom. An angle of 0 will cause the branches to have uniform thickness "
"over their length. A bit of an angle can increase stability of the organic "
"support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2943
msgid "Branch Diameter with double walls"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
#: src/libslic3r/PrintConfig.cpp:2946
msgid ""
"Branches with area larger than the area of a circle of this diameter will be "
"printed with double walls for stability. Set this value to zero for no "
"double walls."
msgstr ""

#. TRN PrintSettings: #lmFIXME
#: src/libslic3r/PrintConfig.cpp:2959
msgid "Branch Distance"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Distance"
#: src/libslic3r/PrintConfig.cpp:2962
msgid ""
"How far apart the branches need to be when they touch the model. Making this "
"distance small will cause the tree support to touch the model at more "
"points, causing better overhang but making support harder to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2969
msgid "Branch Density"
msgstr ""

#. TRN PrintSettings: "Organic supports" > "Branch Density"
#: src/libslic3r/PrintConfig.cpp:2972
msgid ""
"Adjusts the density of the support structure used to generate the tips of "
"the branches. A higher value results in better overhangs but the supports "
"are harder to remove, thus it is recommended to enable top support "
"interfaces instead of a high branch density value if dense interfaces are "
"needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2984
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""
"Nozzletemperatuur voor lagen na de eerste laag. Stel in op 0 om "
"temperatuurregeling uit te zetten in de G-code."

#: src/libslic3r/PrintConfig.cpp:2987
msgid "Nozzle temperature"
msgstr "Nozzletemperatuur"

#: src/libslic3r/PrintConfig.cpp:2993
msgid "Thick bridges"
msgstr "Dikke bruggen"

#: src/libslic3r/PrintConfig.cpp:2995
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""
"Als dit is ingeschakeld worden bruggen betrouwbaarder, kunnen langere "
"bruggen printen, maar er minder mooi uitzien. Als dit uitstaat zien bruggen "
"er beter uit, maar zijn alleen betrouwbaar over korte afstanden."

#: src/libslic3r/PrintConfig.cpp:3001
msgid "Detect thin walls"
msgstr "Detecteer dunne wanden"

#: src/libslic3r/PrintConfig.cpp:3003
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"Detecteer éénlijnige wanden (delen waar 2 extrusielijnen niet passen en dit "
"geprint moet worden met 1 lijn)."

#: src/libslic3r/PrintConfig.cpp:3009
msgid "Threads"
msgstr "Processen"

#: src/libslic3r/PrintConfig.cpp:3010
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""
"Meerdere processen worden gebruikt om langdurige commando's parallel te "
"draaien. Het optimaal aantal processen is vlak boven het aanwezige aantal "
"kernen/processoren."

#: src/libslic3r/PrintConfig.cpp:3022
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""
"Deze custom code wordt ingevoegd voor elke toolwisseling. Variabelen voor "
"alle PrusaSlicer-instellingen kunnen gebruikt worden, evenals "
"{toolchange_z}, {previous_extruder} en {next_extruder}. Als een "
"toolwisseling-commando is toegevoegd die wisselt naar dezelfde extruder "
"(zoals T{next_extruder}), zal PrusaSlicer deze verder negeren. Het is daarom "
"mogelijk om een custom script toe te passen voor en na de toolwisseling."

#: src/libslic3r/PrintConfig.cpp:3035
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de vulling van bovenvlakken. Dit kan gebruikt worden voor een dunner "
"extrudaat in smalle gebieden voor een gladdere afwerking. Als dit is "
"uitgedrukt als percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:3048
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"Printsnelheid voor dichte toplagen (alleen de buitenste zichtbare laag). Als "
"deze waarde lager wordt gezet, resulteert dit in een gladder oppervlak. Als "
"dit is uitgedrukt als percentage, wordt dit berekend over de "
"vullingssnelheid. Als dit ingesteld is op 0, wordt een automatische snelheid "
"genomen."

#. TRN Print Settings: "Top solid layers"
#: src/libslic3r/PrintConfig.cpp:3061 src/libslic3r/PrintConfig.cpp:3069
msgctxt "Layers"
msgid "Top"
msgstr "Bovenkant"

#: src/libslic3r/PrintConfig.cpp:3063
msgid "Number of solid layers to generate on top surfaces."
msgstr "Aantal te genereren dichte lagen voor bovenvlakken."

#: src/libslic3r/PrintConfig.cpp:3064
msgid "Top solid layers"
msgstr "Bovenste dichte vulling"

#: src/libslic3r/PrintConfig.cpp:3071
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""
"Het aantal dichte bovenlagen wordt verhoogd als blijkt dat dit nodig is om "
"de minimale shelldikte te garanderen. Dit is handig om kussenvorming te "
"voorkomen bij het printen met variabele laagdikte."

#: src/libslic3r/PrintConfig.cpp:3074
msgid "Minimum top shell thickness"
msgstr "Minimale shelldikte aan de bovenzijde"

#: src/libslic3r/PrintConfig.cpp:3081
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "Bewegingssnelheid als niet geëxtrudeerd wordt."

#: src/libslic3r/PrintConfig.cpp:3089
msgid "Z travel"
msgstr "Z-beweging"

#: src/libslic3r/PrintConfig.cpp:3090
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""
"Snelheid voor bewegingen van de Z-as.\n"
"Als dit ingesteld is op 0, zal de waarde worden genegeerd en "
"standaardwaarden worden gebruikt."

#: src/libslic3r/PrintConfig.cpp:3098
msgid "Use firmware retraction"
msgstr "Gebruik de firmware-retractie"

#: src/libslic3r/PrintConfig.cpp:3099
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"Deze experimentele instelling gebruikt G10 en G11 commando's voor het "
"retracten in de firmware. Dit wordt alleen ondersteunt bij de recente Marlin-"
"variant."

#: src/libslic3r/PrintConfig.cpp:3105
msgid "Use relative E distances"
msgstr "Gebruik relatieve E-waarden"

#: src/libslic3r/PrintConfig.cpp:3106
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"Als uw firmware relatieve extrusiewaarden nodig heeft, vink dit dan aan. "
"Laat het ander uit staan. De meeste firmware gebruiken absolute waarden."

#: src/libslic3r/PrintConfig.cpp:3112
msgid "Use volumetric E"
msgstr "Gebruik volumetrische E-waarden"

#: src/libslic3r/PrintConfig.cpp:3113
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"Deze experimentele instelling gebruikt E-waarden in kubieke millimeters in "
"plaats van lineaire millimeters. Als uw firmware nog niet weet wat de "
"filamentdiameter is, kunt u een commando zoals 'M200 D[filament_diameter_0] "
"T0' in de start G-code invoegen om de volumetrische modus te gebruiken. Deze "
"variabele gebruikt de filamentdiameter zoals ingevoerd bij de "
"filamentinstellingen. Dit wordt alleen ondersteund in de recente Marlin-"
"variant."

#: src/libslic3r/PrintConfig.cpp:3123
msgid "Enable variable layer height feature"
msgstr "Variabele laagdikte toestaan"

#: src/libslic3r/PrintConfig.cpp:3124
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"Sommige printers of printersetups kunnen niet printen met een variabele "
"laagdikte. Staat standaard aan."

#: src/libslic3r/PrintConfig.cpp:3130
msgid "Wipe while retracting"
msgstr "Veeg af bij het retracten"

#: src/libslic3r/PrintConfig.cpp:3131
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"Als u dit aanvinkt beweegt de nozzle tijdens het retracten om een blob of "
"lekkende extruders tegen te gaan."

#: src/libslic3r/PrintConfig.cpp:3138
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"Multi-materialprinters moeten afvegen bij toolwisselingen. Extrudeer het "
"overtollige materiaal op het afveegblok."

#: src/libslic3r/PrintConfig.cpp:3144
msgid "Purging volumes - load/unload volumes"
msgstr "Afveegvolume - laad/ontlaad volumes"

#: src/libslic3r/PrintConfig.cpp:3145
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""
"Deze vector bespaart de benodigde volumes om van/naar elke extruder dat op "
"het afveegblok wordt gebruikt te wisselen. Deze waarden worden gebruikt om "
"het creëren van de onderstaande volledige reinigingsvolumes te "
"vereenvoudigen."

#: src/libslic3r/PrintConfig.cpp:3151
msgid "Purging volumes - matrix"
msgstr "Afveegvolume - matrix"

#: src/libslic3r/PrintConfig.cpp:3152
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""
"Deze matrix beschrijft volume (in mm³) dat is vereist om nieuw filament af "
"te vegen aan het afveegblok voor elk paar van extruders."

#: src/libslic3r/PrintConfig.cpp:3161
msgid "Position X"
msgstr "X-positie"

#: src/libslic3r/PrintConfig.cpp:3162
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "X-coördinaat van de linkervoorhoek van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:3168
msgid "Position Y"
msgstr "Y-positie"

#: src/libslic3r/PrintConfig.cpp:3169
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "Y-coördinaat van de linkervoorhoek van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:3175
msgid "Width"
msgstr "Breedte"

#: src/libslic3r/PrintConfig.cpp:3176
msgid "Width of a wipe tower"
msgstr "Breedte van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:3182
msgid "Wipe tower rotation angle"
msgstr "Rotatie van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:3183
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr "Rotatie van het afveegblok ten opzichte van de X-as."

#: src/libslic3r/PrintConfig.cpp:3189 src/libslic3r/PrintConfig.cpp:3190
msgid "Wipe tower brim width"
msgstr "Brimbreedte van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:3197
msgid "Stabilization cone apex angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3198
msgid ""
"Angle at the apex of the cone that is used to stabilize the wipe tower. "
"Larger angle means wider base."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3207
msgid "Wipe tower purge lines spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3208
msgid "Spacing of purge lines on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3217
msgid "Wipe into this object's infill"
msgstr "Afvegen in de vulling van het object"

#: src/libslic3r/PrintConfig.cpp:3218
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""
"Afvegen na een toolwisseling wordt gedaan in de vulling van het object. Dit "
"reduceert de hoeveelheid afval, maar kan resulteren in langere printtijden "
"door meer bewegingen."

#: src/libslic3r/PrintConfig.cpp:3225
msgid "Wipe into this object"
msgstr "Afvegen in dit object"

#: src/libslic3r/PrintConfig.cpp:3226
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"Het object wordt gebruikt om de nozzle af te vegen bij een toolwissel om "
"materiaal dat anders in het afveegblok gebruikt wordt te besparen. Kleuren "
"kunnen dan gemengd worden."

#: src/libslic3r/PrintConfig.cpp:3232
msgid "Maximal bridging distance"
msgstr "Maximale brugafstand"

#: src/libslic3r/PrintConfig.cpp:3233
msgid "Maximal distance between supports on sparse infill sections."
msgstr "Maximale afstand tussen support op dunne vullingsdelen."

#: src/libslic3r/PrintConfig.cpp:3239
msgid "XY Size Compensation"
msgstr "Compensatie voor X- en Y-grootte"

#: src/libslic3r/PrintConfig.cpp:3241
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"Het object wordt in horizontale richting verbreed/versmald in de ingestelde "
"waarde (negatief = naar binnen, positief = naar buiten). Dit kan handig zijn "
"voor het verfijnen van gaten."

#: src/libslic3r/PrintConfig.cpp:3249
msgid "Z offset"
msgstr "Z-hoogte"

#: src/libslic3r/PrintConfig.cpp:3250
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"Deze waarde wordt toegevoegd (of afgetrokken) van alle Z-coördinaten in de G-"
"code. Het wordt gebruikt voor een slechte Z-eindstop positie. Als de Z-"
"eindstop bijvoorbeeld een waarde gebruikt die 0.3mm van het printbed is, kan "
"dit ingesteld worden op -0.3mm."

#: src/libslic3r/PrintConfig.cpp:3259
msgid "Perimeter generator"
msgstr "Perimetergeneratie"

#: src/libslic3r/PrintConfig.cpp:3261
msgid ""
"Classic perimeter generator produces perimeters with constant extrusion "
"width and for very thin areas is used gap-fill. Arachne engine produces "
"perimeters with variable extrusion width. This setting also affects the "
"Concentric infill."
msgstr ""
"Klassieke perimetergeneratie produceert perimeters met constante "
"extrusiebreedte en gebruikt gatenvulling voor dunne stukken. Arachne "
"produceert perimeters met variabele extrusiebreedte. Deze instelling heeft "
"ook effect op concentrische vulling."

#: src/libslic3r/PrintConfig.cpp:3266
msgid "Classic"
msgstr "Klassiek"

#: src/libslic3r/PrintConfig.cpp:3267
msgid "Arachne"
msgstr "Arachne"

#: src/libslic3r/PrintConfig.cpp:3273
msgid "Perimeter transition length"
msgstr "Transitielengte voor perimeters"

#: src/libslic3r/PrintConfig.cpp:3275
msgid ""
"When transitioning between different numbers of perimeters as the part "
"becomes thinner, a certain amount of space is allotted to split or join the "
"perimeter segments. If expressed as a percentage (for example 100%), it will "
"be computed based on the nozzle diameter."
msgstr ""
"Bij de overgang naar een verschillend aantal perimeters bij dunnere diktes "
"wordt een bepaalde ruimte gebruikt om te splitten of samenvoegen van "
"perimetersegmenten. Als dit wordt uitgedrukt als percentage (bijvoorbeeld "
"100%), wordt deze berekend op basis van de nozzlediameter."

#: src/libslic3r/PrintConfig.cpp:3284
msgid "Perimeter transitioning filter margin"
msgstr "Marge voor transitielengte voor perimeters"

#: src/libslic3r/PrintConfig.cpp:3286
msgid ""
"Prevent transitioning back and forth between one extra perimeter and one "
"less. This margin extends the range of extrusion widths which follow to "
"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
"Increasing this margin reduces the number of transitions, which reduces the "
"number of extrusion starts/stops and travel time. However, large extrusion "
"width variation can lead to under- or overextrusion problems. If expressed "
"as a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""
"Voorkom transities tussen één en meerdere perimeters. Deze marge breidt het "
"bereik uit van de extrusiebreedte die volgt op [minimale perimeterbreedte - "
"marge, 2x minimale perimeterbreedte + marge]. Verhogen van deze marge "
"reduceert het aantal transities, wat het aantal terugtrekkingen verlaagt. "
"Hoewel, een hogere variatie van de extrusiebreedte kan leiden tot onder- of "
"overextrusie problemen. Als dit wordt uitgedrukt als percentage "
"(bijvoorbeeld 25%) wordt dit berekend op basis van de nozzlediameter."

#: src/libslic3r/PrintConfig.cpp:3299
msgid "Perimeter transitioning threshold angle"
msgstr "Transitiehoek voor perimeters"

#: src/libslic3r/PrintConfig.cpp:3301
msgid ""
"When to create transitions between even and odd numbers of perimeters. A "
"wedge shape with an angle greater than this setting will not have "
"transitions and no perimeters will be printed in the center to fill the "
"remaining space. Reducing this setting reduces the number and length of "
"these center perimeters, but may leave gaps or overextrude."
msgstr ""
"When to create transitions between even and odd numbers of perimeters. A "
"wedge shape with an angle greater than this setting will not have "
"transitions and no perimeters will be printed in the center to fill the "
"remaining space. Reducing this setting reduces the number and length of "
"these center perimeters, but may leave gaps or overextrude."

#: src/libslic3r/PrintConfig.cpp:3312
msgid "Perimeter distribution count"
msgstr "Perimeterdistributieaantal"

#: src/libslic3r/PrintConfig.cpp:3314
msgid ""
"The number of perimeters, counted from the center, over which the variation "
"needs to be spread. Lower values mean that the outer perimeters don't change "
"in width."
msgstr ""
"Het aantal perimeters, geteld vanaf het midden waarover de variatie gespreid "
"wordt. Lagere waarde betekenen dat de buitenste perimeter niet in breedte "
"verandert."

#: src/libslic3r/PrintConfig.cpp:3321
msgid "Minimum feature size"
msgstr "Minimale objectgrootte"

#: src/libslic3r/PrintConfig.cpp:3323
msgid ""
"Minimum thickness of thin features. Model features that are thinner than "
"this value will not be printed, while features thicker than the Minimum "
"feature size will be widened to the Minimum perimeter width. If expressed as "
"a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""
"Minimale dikte van dunne delen. Delen van het model die dunner zijn dan deze "
"waarde worden niet geprint, terwijl delen van het model dikker dan de "
"minimale dikte van dunnen delen worden verbreed tot de minimale "
"perimeterbreedte. Als dit is uitgedrukt als percentage (bijvoorbeeld 25%), "
"wordt dit berekend op basis van de nozzlediameter."

#: src/libslic3r/PrintConfig.cpp:3333
msgid "Minimum perimeter width"
msgstr "Minimale perimeterbreedte"

#: src/libslic3r/PrintConfig.cpp:3335
msgid ""
"Width of the perimeter that will replace thin features (according to the "
"Minimum feature size) of the model. If the Minimum perimeter width is "
"thinner than the thickness of the feature, the perimeter will become as "
"thick as the feature itself. If expressed as a percentage (for example 85%), "
"it will be computed based on the nozzle diameter."
msgstr ""
"Perimeterbreedte die dunne delen vervangt (volgens de minimale dikte van "
"dunne delen) van het model. Als die minimale perimeterbreedte dunner is dan "
"de dikte van de dunne delen, wordt de perimeter net zo dik als het de dunne "
"delen. Als dit is uitgedrukt als percentage (bijvoorbeeld 85%), dan wordt "
"dit berekend op basis van de nozzlediameter."

#: src/libslic3r/PrintConfig.cpp:3401
msgid "Pinhead front diameter"
msgstr "Diameter voorzijde pinkop"

#: src/libslic3r/PrintConfig.cpp:3403
msgid "Diameter of the pointing side of the head"
msgstr "Diameter van de puntige zijde van de kop"

#: src/libslic3r/PrintConfig.cpp:3410
msgid "Head penetration"
msgstr "Koppenetratie"

#: src/libslic3r/PrintConfig.cpp:3412
msgid "How much the pinhead has to penetrate the model surface"
msgstr "Hoe ver de supportkop in het model moet steken"

#: src/libslic3r/PrintConfig.cpp:3419
msgid "Pinhead width"
msgstr "Pinkopbreedte"

#: src/libslic3r/PrintConfig.cpp:3421
msgid "Width from the back sphere center to the front sphere center"
msgstr "Centerafstand van de achterste tot de voorste bol"

#: src/libslic3r/PrintConfig.cpp:3429
msgid "Pillar diameter"
msgstr "Pijlerdiameter"

#: src/libslic3r/PrintConfig.cpp:3431
msgid "Diameter in mm of the support pillars"
msgstr "Diameter van de supportpijlers (in mm)"

#: src/libslic3r/PrintConfig.cpp:3439
msgid "Small pillar diameter percent"
msgstr "Percentage van smalle pijlerdiameter"

#: src/libslic3r/PrintConfig.cpp:3441
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""
"Het percentage van smallere pijlers vergeleken met normale pijlerdiameters "
"die worden gebruikt in moeilijk te bereiken plekken."

#: src/libslic3r/PrintConfig.cpp:3450
msgid "Max bridges on a pillar"
msgstr "Maximaal aantal bruggen op een pijler"

#: src/libslic3r/PrintConfig.cpp:3452
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""
"Maximaal aantal bruggen dat op een pijler geplaatst kan worden. Bruggen "
"houden supportpuntkop bij elkaar en verbinden pijlers as smalle takken."

#: src/libslic3r/PrintConfig.cpp:3460
msgid "Max weight on model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3463
msgid ""
"Maximum weight of sub-trees that terminate on the model instead of the print "
"bed. The weight is the sum of the lenghts of all branches emanating from the "
"endpoint."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3471
msgid "Pillar connection mode"
msgstr "Pijlerverbindingsmodus"

#: src/libslic3r/PrintConfig.cpp:3472
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"Geeft het type brug tussen twee aangrenzende pijlers aan. Dit kan zigzag, "
"kruisend (dubbele zigzag) of dynamisch zijn. Dynamisch houdt in dat wordt "
"geschakeld tussen de eerste twee, afhankelijk van de pijlerafstand."

#: src/libslic3r/PrintConfig.cpp:3478
msgid "Zig-Zag"
msgstr "Zigzag"

#: src/libslic3r/PrintConfig.cpp:3478
msgid "Cross"
msgstr "Kruisend"

#: src/libslic3r/PrintConfig.cpp:3478
msgid "Dynamic"
msgstr "Dynamisch"

#: src/libslic3r/PrintConfig.cpp:3490
msgid "Pillar widening factor"
msgstr "Pijlervergrotingsfactor"

#: src/libslic3r/PrintConfig.cpp:3494
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase. The exact amount of "
"increase is unspecified and can change in the future."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3505
msgid "Support base diameter"
msgstr "Supportbasis - diameter"

#: src/libslic3r/PrintConfig.cpp:3507
msgid "Diameter in mm of the pillar base"
msgstr "Diameter van de pijlerbasis (in mm)"

#: src/libslic3r/PrintConfig.cpp:3515
msgid "Support base height"
msgstr "Supportbasis - hoogte"

#: src/libslic3r/PrintConfig.cpp:3517
msgid "The height of the pillar base cone"
msgstr "Hoogte van de pijlerbasiskegel"

#: src/libslic3r/PrintConfig.cpp:3524
msgid "Support base safety distance"
msgstr "Supportbasis - veilige afstand"

#: src/libslic3r/PrintConfig.cpp:3527
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""
"Minimale afstand tussen pijlerbasis en model (in mm). Dit is handig bij de "
"modus zonder verhoging waar een gat volgens deze parameter wordt ingevoegd "
"tussen het model en de basisplaat."

#: src/libslic3r/PrintConfig.cpp:3537
msgid "Critical angle"
msgstr "Kritische hoek"

#: src/libslic3r/PrintConfig.cpp:3539
msgid "The default angle for connecting support sticks and junctions."
msgstr "De standaardhoek voor de verbinding van supporttakken en kruisingen."

#: src/libslic3r/PrintConfig.cpp:3547
msgid "Max bridge length"
msgstr "Maximale bruglengte"

#: src/libslic3r/PrintConfig.cpp:3549
msgid "The max length of a bridge"
msgstr "Maximale bruglengte"

#: src/libslic3r/PrintConfig.cpp:3561
msgid "Max pillar linking distance"
msgstr "Maximale pijler-verbindafstand"

#: src/libslic3r/PrintConfig.cpp:3563
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""
"Maximale verbindingsafstand van twee pijlers. Een waarde van 0 schakelt aan "
"elkaar verbonden pijlers uit."

#: src/libslic3r/PrintConfig.cpp:3573
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""
"Hoe veel het support omhoog moet bewegen op het ondersteunde object. Als "
"'Basisplaat rondom object' is ingeschakeld wordt deze waarde genegeerd."

#: src/libslic3r/PrintConfig.cpp:3589
msgid "Display width"
msgstr "Schermbreedte"

#: src/libslic3r/PrintConfig.cpp:3590
msgid "Width of the display"
msgstr "Breedte van het scherm"

#: src/libslic3r/PrintConfig.cpp:3595
msgid "Display height"
msgstr "Schermhoogte"

#: src/libslic3r/PrintConfig.cpp:3596
msgid "Height of the display"
msgstr "Hoogte van het scherm"

#: src/libslic3r/PrintConfig.cpp:3601
msgid "Number of pixels in"
msgstr "Aantal pixels"

#: src/libslic3r/PrintConfig.cpp:3603
msgid "Number of pixels in X"
msgstr "Aantal pixels in de breedte"

#: src/libslic3r/PrintConfig.cpp:3609
msgid "Number of pixels in Y"
msgstr "Aantal pixels in de hoogte"

#: src/libslic3r/PrintConfig.cpp:3614
msgid "Display horizontal mirroring"
msgstr "Scherm horizontaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:3615
msgid "Mirror horizontally"
msgstr "Spiegel horizontaal"

#: src/libslic3r/PrintConfig.cpp:3616
msgid "Enable horizontal mirroring of output images"
msgstr "Horizontaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:3621
msgid "Display vertical mirroring"
msgstr "Scherm verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:3622
msgid "Mirror vertically"
msgstr "Verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:3623
msgid "Enable vertical mirroring of output images"
msgstr "Verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:3628
msgid "Display orientation"
msgstr "Schermoriëntatie"

#: src/libslic3r/PrintConfig.cpp:3629
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"Stel de werkelijke oriëntatie van het LCD-scherm van de SLA-printer in. "
"Staande modus zal de breedte- en hoogteparameters omwisselen en de output "
"wordt 90 graden gedraaid."

#: src/libslic3r/PrintConfig.cpp:3633
msgid "Landscape"
msgstr "Liggend"

#: src/libslic3r/PrintConfig.cpp:3634
msgid "Portrait"
msgstr "Staand"

#: src/libslic3r/PrintConfig.cpp:3640 src/libslic3r/PrintConfig.cpp:4136
msgid "Fast"
msgstr "Snel"

#: src/libslic3r/PrintConfig.cpp:3641
msgid "Fast tilt"
msgstr "Snelle draaiing"

#: src/libslic3r/PrintConfig.cpp:3642
msgid "Time of the fast tilt"
msgstr "Tijd van de snelle draaiing"

#: src/libslic3r/PrintConfig.cpp:3649 src/libslic3r/PrintConfig.cpp:4135
msgid "Slow"
msgstr "Langzaam"

#: src/libslic3r/PrintConfig.cpp:3650
msgid "Slow tilt"
msgstr "Langzaam draaien"

#: src/libslic3r/PrintConfig.cpp:3651
msgid "Time of the slow tilt"
msgstr "Tijd van de langzame draaiing"

#: src/libslic3r/PrintConfig.cpp:3658 src/libslic3r/PrintConfig.cpp:4137
msgid "High viscosity"
msgstr "Hoge viscositeit"

#: src/libslic3r/PrintConfig.cpp:3659
msgid "Tilt for high viscosity resin"
msgstr "Draaiing voor hoogvisceuze resin"

#: src/libslic3r/PrintConfig.cpp:3660
msgid "Time of the super slow tilt"
msgstr "Tijd van de zeer langzame draaiing"

#: src/libslic3r/PrintConfig.cpp:3667
msgid "Area fill"
msgstr "Vulgebied"

#: src/libslic3r/PrintConfig.cpp:3668
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"Percentage van het printbed. \n"
"Als het printgebied buiten een specifieke waarde valt \n"
"wordt een korte draaiing gebruikt, anders een snelle"

#: src/libslic3r/PrintConfig.cpp:3675 src/libslic3r/PrintConfig.cpp:3676
#: src/libslic3r/PrintConfig.cpp:3677
msgid "Printer scaling correction"
msgstr "Verschalingscorrectie voor printer"

#: src/libslic3r/PrintConfig.cpp:3683 src/libslic3r/PrintConfig.cpp:3685
msgid "Printer scaling correction in X axis"
msgstr "Verschalingscorrectie over de X-as"

#: src/libslic3r/PrintConfig.cpp:3684
msgid "Printer scaling X axis correction"
msgstr "Verschalingscorrectie in X-richting"

#: src/libslic3r/PrintConfig.cpp:3691 src/libslic3r/PrintConfig.cpp:3693
msgid "Printer scaling correction in Y axis"
msgstr "Verschalingscorrectie over de Y-as"

#: src/libslic3r/PrintConfig.cpp:3692
msgid "Printer scaling Y axis correction"
msgstr "Verschalingscorrectie in Y-riching"

#: src/libslic3r/PrintConfig.cpp:3699 src/libslic3r/PrintConfig.cpp:3701
msgid "Printer scaling correction in Z axis"
msgstr "Verschalingscorrectie over de Z-as"

#: src/libslic3r/PrintConfig.cpp:3700
msgid "Printer scaling Z axis correction"
msgstr "Verschalingscorrectie in Z-riching"

#: src/libslic3r/PrintConfig.cpp:3707 src/libslic3r/PrintConfig.cpp:3708
msgid "Printer absolute correction"
msgstr "Absolute correctie voor printer"

#: src/libslic3r/PrintConfig.cpp:3709
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""
"Zal de geslicede veelhoeken uitrekken of laten krimpen, afhankelijk van de "
"correctiewaarde."

#: src/libslic3r/PrintConfig.cpp:3715
msgid "Elephant foot minimum width"
msgstr "Squish-compensatiebreedte"

#: src/libslic3r/PrintConfig.cpp:3717
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr "Minimale breedte van delen waarop squish-compensatie wordt toegepast."

#: src/libslic3r/PrintConfig.cpp:3724 src/libslic3r/PrintConfig.cpp:3725
msgid "Printer gamma correction"
msgstr "Gammacorrectie voor printer"

#: src/libslic3r/PrintConfig.cpp:3726
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""
"Dit zorgt voor een gammacorrectie voor de veelhoeken. Een gammawaarde van 0 "
"betekent een waarde die in het midden ligt. Dit gedrag elimineert anti-"
"aliasing zonder dat gaten in de veelhoeken verloren gaan."

#: src/libslic3r/PrintConfig.cpp:3745 src/libslic3r/PrintConfig.cpp:3746
msgid "SLA material type"
msgstr "SLA-materiaaltype"

#: src/libslic3r/PrintConfig.cpp:3753 src/libslic3r/PrintConfig.cpp:3754
msgid "Initial layer height"
msgstr "Laagdikte eerste laag"

#: src/libslic3r/PrintConfig.cpp:3760
msgid "Idle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3761
msgid ""
"Nozzle temperature when the tool is currently not used in multi-tool setups."
"This is only used when 'Ooze prevention' is active in Print Settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3769 src/libslic3r/PrintConfig.cpp:3770
msgid "Bottle volume"
msgstr "Flesinhoud (volume)"

#: src/libslic3r/PrintConfig.cpp:3771
msgid "ml"
msgstr "ml"

#: src/libslic3r/PrintConfig.cpp:3776 src/libslic3r/PrintConfig.cpp:3777
msgid "Bottle weight"
msgstr "Flesinhoud (gewicht)"

#: src/libslic3r/PrintConfig.cpp:3778
msgid "kg"
msgstr "kg"

#: src/libslic3r/PrintConfig.cpp:3785
msgid "g/ml"
msgstr "g/ml"

#: src/libslic3r/PrintConfig.cpp:3792
msgid "money/bottle"
msgstr "€/fles"

#: src/libslic3r/PrintConfig.cpp:3797
msgid "Faded layers"
msgstr "Transitielagen"

#: src/libslic3r/PrintConfig.cpp:3798
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""
"Aantal lagen waarin de initiële belichtingstijd stapsgewijs wordt "
"teruggebracht naar de standaard belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:3805 src/libslic3r/PrintConfig.cpp:3806
msgid "Minimum exposure time"
msgstr "Minimale belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:3813 src/libslic3r/PrintConfig.cpp:3814
msgid "Maximum exposure time"
msgstr "Maximale belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:3821 src/libslic3r/PrintConfig.cpp:3822
msgid "Exposure time"
msgstr "Belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:3828 src/libslic3r/PrintConfig.cpp:3829
msgid "Minimum initial exposure time"
msgstr "Minimale initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:3836 src/libslic3r/PrintConfig.cpp:3837
msgid "Maximum initial exposure time"
msgstr "Maximale initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:3844 src/libslic3r/PrintConfig.cpp:3845
msgid "Initial exposure time"
msgstr "Initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:3851 src/libslic3r/PrintConfig.cpp:3852
msgid "Correction for expansion"
msgstr "Vergrotingscorrectie"

#: src/libslic3r/PrintConfig.cpp:3858 src/libslic3r/PrintConfig.cpp:3859
msgid "Correction for expansion in X axis"
msgstr "Uitzettingscorrectie over de X-as"

#: src/libslic3r/PrintConfig.cpp:3865 src/libslic3r/PrintConfig.cpp:3866
msgid "Correction for expansion in Y axis"
msgstr "Uitzettingscorrectie over de Y-as"

#: src/libslic3r/PrintConfig.cpp:3872 src/libslic3r/PrintConfig.cpp:3873
msgid "Correction for expansion in Z axis"
msgstr "Uitzettingscorrectie over de Z-as"

#: src/libslic3r/PrintConfig.cpp:3879
msgid "SLA print material notes"
msgstr "SLA-printmateriaal opmerkingen"

#: src/libslic3r/PrintConfig.cpp:3880
msgid "You can put your notes regarding the SLA print material here."
msgstr "U kunt hier opmerkingen plaatsen wat betreft het SLA-materiaal."

#: src/libslic3r/PrintConfig.cpp:3894 src/libslic3r/PrintConfig.cpp:3905
msgid "Default SLA material profile"
msgstr "Standaard SLA-materiaalprofiel"

#: src/libslic3r/PrintConfig.cpp:3916
msgid "Generate supports"
msgstr "Genereer support"

#: src/libslic3r/PrintConfig.cpp:3918
msgid "Generate supports for the models"
msgstr "Genereer support voor de modellen"

#: src/libslic3r/PrintConfig.cpp:3923
msgid "Support tree type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3924
msgid "Support tree building strategy"
msgstr ""

#. TRN One of the "Support tree type"s on SLAPrintSettings : Supports
#: src/libslic3r/PrintConfig.cpp:3929
msgid "Branching (experimental)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3938
msgid "Support only in enforced regions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3940
msgid "Only create support if it lies in a support enforcer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3947
msgid "This is a relative measure of support points density."
msgstr "Relatieve waarde van de dichtheid van supportpunten."

#: src/libslic3r/PrintConfig.cpp:3953
msgid "Minimal distance of the support points"
msgstr "Minimale supportpuntafstand"

#: src/libslic3r/PrintConfig.cpp:3955
msgid "No support points will be placed closer than this threshold."
msgstr "Minimale afstand tussen supportpunten."

#: src/libslic3r/PrintConfig.cpp:3961
msgid "Use pad"
msgstr "Gebruik basisplaat"

#: src/libslic3r/PrintConfig.cpp:3963
msgid "Add a pad underneath the supported model"
msgstr "Voeg een basisplaat toe onder het model met support"

#: src/libslic3r/PrintConfig.cpp:3968
msgid "Pad wall thickness"
msgstr "Basisplaat - wanddikte"

#: src/libslic3r/PrintConfig.cpp:3970
msgid "The thickness of the pad and its optional cavity walls."
msgstr "Dikte van de basisplaat en optionele wanden."

#: src/libslic3r/PrintConfig.cpp:3978
msgid "Pad wall height"
msgstr "Basisplaat - wandhoogte"

#: src/libslic3r/PrintConfig.cpp:3979
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""
"Geeft de basisplaat-wandhoogte aan. Als dit ingesteld is op 0, wordt dit "
"uitgeschakeld. Wees voorzichtig met het aanzetten van deze optie, omdat "
"sommige resins een sterk zuigeffect in de holte produceren, wat het afpellen "
"van de print van het folie lastig kan maken."

#: src/libslic3r/PrintConfig.cpp:3992
msgid "Pad brim size"
msgstr "Basisplaat - expansie"

#: src/libslic3r/PrintConfig.cpp:3993
msgid "How far should the pad extend around the contained geometry"
msgstr "Hoe ver de basisplaat moet uitsteken buiten de geometrie"

#: src/libslic3r/PrintConfig.cpp:4003
msgid "Max merge distance"
msgstr "Maximale combineerafstand"

#: src/libslic3r/PrintConfig.cpp:4005
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"Sommige objecten werken beter met een aantal kleinere basisplaten in plaats "
"van één grote. Deze parameter bepaalt hoe ver de tussenafstand van de "
"kleinere basisplaten mogen zijn."

#: src/libslic3r/PrintConfig.cpp:4025
msgid "Pad wall slope"
msgstr "Basisplaat - zijhoek"

#: src/libslic3r/PrintConfig.cpp:4027
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""
"Hoek van de basisplaatzijde ten opzichte van het bed. 90 graden betekent een "
"rechte zijkant."

#: src/libslic3r/PrintConfig.cpp:4038
msgid "Create pad around object and ignore the support elevation"
msgstr "Genereer basisplaat rondom object en schakel objectverhoging uit"

#: src/libslic3r/PrintConfig.cpp:4043
msgid "Pad around object everywhere"
msgstr "Overal basisplaat rondom object"

#: src/libslic3r/PrintConfig.cpp:4045
msgid "Force pad around object everywhere"
msgstr "Forceer basisplaat overal rondom het object"

#: src/libslic3r/PrintConfig.cpp:4050
msgid "Pad object gap"
msgstr "Basisplaat - gat"

#: src/libslic3r/PrintConfig.cpp:4052
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""
"Het gat tussen de onderkant van het object en de gegenereerde basisplaat in "
"de modus zonder verhoging."

#: src/libslic3r/PrintConfig.cpp:4061
msgid "Pad object connector stride"
msgstr "Basisplaat - verbindingstakafstand"

#: src/libslic3r/PrintConfig.cpp:4063
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""
"Afstand tussen twee verbindingstakken die het object verbinden aan de "
"basisplaat."

#: src/libslic3r/PrintConfig.cpp:4070
msgid "Pad object connector width"
msgstr "Basisplaat - verbindingstakbreedte"

#: src/libslic3r/PrintConfig.cpp:4072
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""
"Breedte van de verbindingstakken die het object en de basisplaat met elkaar "
"verbinden."

#: src/libslic3r/PrintConfig.cpp:4079
msgid "Pad object connector penetration"
msgstr "Basisplaat - Verbindingstakinsteek"

#: src/libslic3r/PrintConfig.cpp:4082
msgid "How much should the tiny connectors penetrate into the model body."
msgstr "Hoe ver de verbindingstakken in het model steken."

#: src/libslic3r/PrintConfig.cpp:4089
msgid "Enable hollowing"
msgstr "Uithollen toestaan"

#: src/libslic3r/PrintConfig.cpp:4091
msgid "Hollow out a model to have an empty interior"
msgstr "Hol een model uit voor een leeg binnenste"

#: src/libslic3r/PrintConfig.cpp:4096
msgid "Wall thickness"
msgstr "Wanddikte"

#: src/libslic3r/PrintConfig.cpp:4098
msgid "Minimum wall thickness of a hollowed model."
msgstr "Minimale wanddikte van een uitgehold model."

#: src/libslic3r/PrintConfig.cpp:4106
msgid "Accuracy"
msgstr "Nauwkeurigheid"

#: src/libslic3r/PrintConfig.cpp:4108
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""
"Prestatie tegenover nauwkeurigheid van berekenen. Lagere waarde kunnen "
"ongewenste artefacten produceren."

#: src/libslic3r/PrintConfig.cpp:4118
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""
"Uithollen voltooid in twee stappen: eerst is een denkbeeldig binnenste in "
"het model berekend (wanddikte + sluitafstand). Daarna is het opgeblazen, "
"terug naar de aangegeven wanddikte. Een grotere sluitafstand maakt het "
"binnenste ronder. Bij een waarde van 0 is het binnenste vrijwel gelijk aan "
"de buitenzijde."

#: src/libslic3r/PrintConfig.cpp:4130
msgid "Print speed"
msgstr "Printsnelheid"

#: src/libslic3r/PrintConfig.cpp:4132
msgid ""
"A slower printing profile might be necessary when using materials with "
"higher viscosity or with some hollowed parts. It slows down the tilt "
"movement and adds a delay before exposure."
msgstr ""
"Een langzamer printprofiel kan nodig zijn bij materialen met een hogere "
"vloeibaarheid of met holle delen. Het vertraagt de kantelbeweging en voegt "
"een vertraging toe na de belichting."

#: src/libslic3r/PrintConfig.cpp:4143
msgid "Format of the output SLA archive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4148
msgid "SLA output precision"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4149
msgid "Minimum resolution in nanometers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4637
msgid "Export OBJ"
msgstr "Exporteer OBJ"

#: src/libslic3r/PrintConfig.cpp:4638
msgid "Export the model(s) as OBJ."
msgstr "Exporteer de modellen als .OBJ-bestand."

#: src/libslic3r/PrintConfig.cpp:4649
msgid "Export SLA"
msgstr "Exporteer SLA"

#: src/libslic3r/PrintConfig.cpp:4650
msgid "Slice the model and export SLA printing layers as PNG."
msgstr "Slice het model en exporteer SLA-printlagen als .PNG-bestanden."

#: src/libslic3r/PrintConfig.cpp:4655
msgid "Export 3MF"
msgstr "Exporteer 3MF"

#: src/libslic3r/PrintConfig.cpp:4656
msgid "Export the model(s) as 3MF."
msgstr "Exporteer de modellen als .3MF-bestanden."

#: src/libslic3r/PrintConfig.cpp:4660
msgid "Export AMF"
msgstr "Exporteer AMF"

#: src/libslic3r/PrintConfig.cpp:4661
msgid "Export the model(s) as AMF."
msgstr "Exporteer de modellen als .AMF-bestanden."

#: src/libslic3r/PrintConfig.cpp:4665
msgid "Export STL"
msgstr "Exporteer STL"

#: src/libslic3r/PrintConfig.cpp:4666
msgid "Export the model(s) as STL."
msgstr "Exporteer de modellen als .STL-bestand."

#: src/libslic3r/PrintConfig.cpp:4671
msgid "Slice the model and export toolpaths as G-code."
msgstr "Slice het model en exporteer de paden als .gcode-bestand."

#: src/libslic3r/PrintConfig.cpp:4676
msgid "G-code viewer"
msgstr "G-code weergave"

#: src/libslic3r/PrintConfig.cpp:4677
msgid "Visualize an already sliced and saved G-code"
msgstr "Visualiseer een reeds opgeslagen G-code"

#: src/libslic3r/PrintConfig.cpp:4683
msgid "OpenGL version"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4684
msgid "Select a specific version of OpenGL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4689
msgid "OpenGL debug output"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4690
msgid "Activate OpenGL debug output on graphic cards which support it"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4696
msgid "Slice"
msgstr "Slice"

#: src/libslic3r/PrintConfig.cpp:4697
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""
"Slice het model als FFF of SLA, gebaseerd op de 'printer_technology'-"
"configuratiewaarde."

#: src/libslic3r/PrintConfig.cpp:4702
msgid "Help"
msgstr "Help"

#: src/libslic3r/PrintConfig.cpp:4703
msgid "Show this help."
msgstr "Toon deze hulp zien."

#: src/libslic3r/PrintConfig.cpp:4708
msgid "Help (FFF options)"
msgstr "Help (FFF-opties)"

#: src/libslic3r/PrintConfig.cpp:4709
msgid "Show the full list of print/G-code configuration options."
msgstr "Toon de volledige lijst van print- of G-code-configuratie-opties."

#: src/libslic3r/PrintConfig.cpp:4713
msgid "Help (SLA options)"
msgstr "Help (SLA opties)"

#: src/libslic3r/PrintConfig.cpp:4714
msgid "Show the full list of SLA print configuration options."
msgstr "Toon de volledige lijst van SLA-printconfiguratie-opties."

#: src/libslic3r/PrintConfig.cpp:4718
msgid "Output Model Info"
msgstr "Output model-info"

#: src/libslic3r/PrintConfig.cpp:4719
msgid "Write information about the model to the console."
msgstr "Schrijf informatie over het model naar de console."

#: src/libslic3r/PrintConfig.cpp:4723
msgid "Save config file"
msgstr "Sla configuratiebestand op"

#: src/libslic3r/PrintConfig.cpp:4724
msgid "Save configuration to the specified file."
msgstr "Sla configuratie op in aangegeven bestand."

#: src/libslic3r/PrintConfig.cpp:4734
msgid "Align XY"
msgstr "XY uitlijnen"

#: src/libslic3r/PrintConfig.cpp:4735
msgid "Align the model to the given point."
msgstr "Lijn de modellen uit op het gegeven punt."

#: src/libslic3r/PrintConfig.cpp:4740
msgid "Cut model at the given Z."
msgstr "Snijdt model op de ingestelde hoogte."

#: src/libslic3r/PrintConfig.cpp:4762
msgid "Center the print around the given center."
msgstr "Centreer de print op het middelpunt."

#: src/libslic3r/PrintConfig.cpp:4766
msgid "Don't arrange"
msgstr "Niet schikken"

#: src/libslic3r/PrintConfig.cpp:4767
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""
"Herschik de modellen niet voor het samenvoegen en behoudt de originele X- en "
"Y-coördinaten."

#: src/libslic3r/PrintConfig.cpp:4770
msgid "Ensure on bed"
msgstr "Plaats op bed"

#: src/libslic3r/PrintConfig.cpp:4771
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""
"Til het object boven het bed als deze er gedeeltelijk onder valt. Staat "
"standaard aan. Gebruik \"no_ensure_on_bed\" om uit te zetten."

#: src/libslic3r/PrintConfig.cpp:4775
msgid "Duplicate"
msgstr "Dupliceer"

#: src/libslic3r/PrintConfig.cpp:4776
msgid "Multiply copies by this factor."
msgstr "Meerdere kopieën van dit aantal."

#: src/libslic3r/PrintConfig.cpp:4780
msgid "Duplicate by grid"
msgstr "Dupliceer in raster"

#: src/libslic3r/PrintConfig.cpp:4781
msgid "Multiply copies by creating a grid."
msgstr "Meerdere kopieën in raster."

#: src/libslic3r/PrintConfig.cpp:4785
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"Schik de toegevoegde modellen en combineer ze tot één model om eenmalig "
"acties uit te voeren."

#: src/libslic3r/PrintConfig.cpp:4790
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"Probeer alle niet-gesloten meshes te repareren (deze optie is impliciet "
"toegevoegd om, wanneer dat nodig is, onmogelijke modellen toch te slicen)."

#: src/libslic3r/PrintConfig.cpp:4794
msgid "Rotation angle around the Z axis in degrees."
msgstr "Rotatiehoek rond de Z-as in graden."

#: src/libslic3r/PrintConfig.cpp:4798
msgid "Rotate around X"
msgstr "Draai over de X-as"

#: src/libslic3r/PrintConfig.cpp:4799
msgid "Rotation angle around the X axis in degrees."
msgstr "Rotatiehoek rond de X-as in graden."

#: src/libslic3r/PrintConfig.cpp:4803
msgid "Rotate around Y"
msgstr "Draai over de Y-as"

#: src/libslic3r/PrintConfig.cpp:4804
msgid "Rotation angle around the Y axis in degrees."
msgstr "Rotatiehoek rond de Y-as in graden."

#: src/libslic3r/PrintConfig.cpp:4809
msgid "Scaling factor or percentage."
msgstr "Schalingsfactor of percentage."

#: src/libslic3r/PrintConfig.cpp:4814
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""
"Detecteer niet-verbonden onderdelen in het model en deel ze op in "
"verschillende objecten."

#: src/libslic3r/PrintConfig.cpp:4817
msgid "Scale to Fit"
msgstr "Verschaal naar passing"

#: src/libslic3r/PrintConfig.cpp:4818
msgid "Scale to fit the given volume."
msgstr "Verschaal naar passing in het gegeven volume."

#: src/libslic3r/PrintConfig.cpp:4822
msgid "Delete files after loading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4823
msgid "Delete files after loading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4831
msgid "Ignore non-existent config files"
msgstr "Negeer niet-bestaande configuratiebestanden"

#: src/libslic3r/PrintConfig.cpp:4832
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "Geef geen fout als een bestand om te laden niet bestaat."

#: src/libslic3r/PrintConfig.cpp:4835
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr ""
"Doorgang-compatibiliteitsregel bij het laden van configuraties van "
"configuratie- en projectbestanden (3MF, AMF)."

#: src/libslic3r/PrintConfig.cpp:4836
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""
"Deze versie van PrusaSlicer snapt configuraties geproduceerd door nieuwere "
"versie van PrusaSlicer niet. Ter illustratie: nieuwere versies van "
"PrusaSlicer ondersteunen meer firmwarevarianten. Besloten kan worden om een "
"onbekende waarde zonder melding of woordelijk te vervangen door een "
"standaardwaarde."

#: src/libslic3r/PrintConfig.cpp:4840
msgid "Bail out on unknown configuration values"
msgstr "Sla onbekende configuratiewaarden over"

#: src/libslic3r/PrintConfig.cpp:4841
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr ""
"Sta to om onbekende configuratiewaarden te lezen door woordelijk te "
"substitueren met standaardwaarden."

#: src/libslic3r/PrintConfig.cpp:4842
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr ""
"Sta to om onbekende configuratiewaarden te lezen door zonder melding te "
"substitueren met standaardwaarden."

#: src/libslic3r/PrintConfig.cpp:4847
msgid "Load config file"
msgstr "Laad configuratiebestand"

#: src/libslic3r/PrintConfig.cpp:4848
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""
"Laad configuratie uit een specifiek bestand. Dit kan meerdere keren gebruikt "
"worden om instellingen uit meerdere bestanden te laden."

#: src/libslic3r/PrintConfig.cpp:4851
msgid "Output File"
msgstr "Outputbestand"

#: src/libslic3r/PrintConfig.cpp:4852
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""
"Het bestand waaroverheen wordt geschreven (als dit niet aangegeven is, wort "
"dit gebaseerd op het inputbestand)."

#: src/libslic3r/PrintConfig.cpp:4856
msgid "Single instance mode"
msgstr "Enkele instantiemodus"

#: src/libslic3r/PrintConfig.cpp:4857
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""
"Als dit is ingeschakeld worden de commando-argumenten naar een bestaande "
"instantie van de PrusaSlicer GUI of een geopend PrusaSlicer venster "
"gestuurd. Dit overschrijft de \"enkele instantie\"-configuratiewaarde van de "
"programmavoorkeuren."

#: src/libslic3r/PrintConfig.cpp:4862
msgid "Data directory"
msgstr "Bestandslocatie voor de data"

#: src/libslic3r/PrintConfig.cpp:4863
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"Laad fabrieksinstellingen en sla op. Dit is handig voor het onderhouden van "
"verschillende profielen of het opnemen van configuraties van een "
"netwerkopslag."

#: src/libslic3r/PrintConfig.cpp:4866
msgid "Logging level"
msgstr "Logboekniveau"

#: src/libslic3r/PrintConfig.cpp:4867
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""
"Stel log-gevoeligheid in. 0: fataal, 1: fout, 2: waarschuwing, 3: info, 4: "
"debug, 5: traceer\n"
"Voorbeeld: loglevel = 2 geeft fataal-, fout- en waarschuwingslevelberichten."

#: src/libslic3r/PrintConfig.cpp:4873
msgid "Render with a software renderer"
msgstr "Render met software-renderer"

#: src/libslic3r/PrintConfig.cpp:4874
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""
"Render met software-renderer. De meegeleverde MESA-software-renderer is "
"geladen in plaats van het standaard OpenGL stuurprogramma."

#: src/libslic3r/Zipper.cpp:23
msgid "Error with ZIP archive"
msgstr ""

#: src/libslic3r/PrintObject.cpp:169
msgid "Generating perimeters"
msgstr "Perimeters genereren"

#: src/libslic3r/PrintObject.cpp:276
msgid "Preparing infill"
msgstr "Vulling voorbereiden"

#. TRN Status for the Print calculation
#: src/libslic3r/PrintObject.cpp:422
msgid "Making infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:471
msgid "Searching support spots"
msgstr ""

#: src/libslic3r/PrintObject.cpp:496
msgid "Generating support material"
msgstr "Support genereren"

#: src/libslic3r/PrintObject.cpp:519
msgid "Estimating curled extrusions"
msgstr ""

#: src/libslic3r/PrintObjectSlice.cpp:500
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObjectSlice.cpp:734
msgid ""
"An object has enabled XY Size compensation which will not be used because it "
"is also multi-material painted.\n"
"XY Size compensation cannot be combined with multi-material painting."
msgstr ""

#: resources/data/hints.ini: [hint:Fuzzy skin]
msgid ""
"Fuzzy skin\n"
"Did you know that you can create rough fibre-like texture on the sides of "
"your models using the<a>Fuzzy skin</a>feature? You can also use modifiers to "
"apply fuzzy-skin only to a portion of your model."
msgstr ""
"Oneffen oppervlak\n"
"Wist u dat u een vezelachtige textuur op de zijden van uw object kan "
"aanbrengen met de <a>Oneffen oppervlak<a/> optie? U kunt ook modificators "
"toepassen op een oneffen oppervlak voor een gedeelte van het model."

#: resources/data/hints.ini: [hint:Shapes gallery]
msgid ""
"Shapes gallery\n"
"Did you know that PrusaSlicer has a Shapes Gallery? You can use the included "
"models as modifiers, negative volumes or as printable objects. Right-click "
"the platter and select<a>Add Shape - Gallery</a>."
msgstr ""
"Vormengalerij\n"
"Wist u dat PrusaSlicer een vormengalerij heeft? U kunt de vormen daaruit "
"gebruiken als modificators, negatieve volumes, of als printbare objecten. "
"Rechtermuisklik in de modelweergave en selecteer <a>Voeg vorm toe - "
"galerij<a/>."

#: resources/data/hints.ini: [hint:Arrange settings]
msgid ""
"Arrange settings\n"
"Did you know that you can right-click the<a>Arrange icon</a>to adjust the "
"size of the gap between objects and to allow automatic rotations?"
msgstr ""
"Schikken-instellingen\n"
"Wist u dat u met de rechtermuisklik op het <a>Schikken icoon<a/> de afstand "
"tussen de objecten en automatisch roteren kunt instellen?"

#: resources/data/hints.ini: [hint:Negative volume]
msgid ""
"Negative volume\n"
"Did you know that you can subtract one mesh from another using the Negative "
"volume modifier? That way you can, for example, create easily resizable "
"holes directly in PrusaSlicer. Read more in the documentation. (Requires "
"Advanced or Expert mode.)"
msgstr ""
"Negatief volume\n"
"Wist u dat u volumes van elkaar kunt aftrekken met een negatief volume als "
"modificator? Daarmee kunt u bijvoorbeeld makkelijk verschaalbare gaten "
"aanbrengen, direct in PrusaSlicer. Lees meer in de documentatie (vereist "
"geavanceerde- of expertmodus)."

#: resources/data/hints.ini: [hint:Simplify mesh]
msgid ""
"Simplify mesh\n"
"Did you know that you can reduce the number of triangles in a mesh using the "
"Simplify mesh feature? Right-click the model and select Simplify model. Read "
"more in the documentation."
msgstr ""
"Mesh vereenvoudigen\n"
"Wist u dat het u het aantal facetten van een mesh kunt reduceren met de Mesh "
"vereenvoudigen optie? Rechtermuisklik op het model en selecteer Mesh "
"vereenvoudigen. Lees meer in de documentatie."

#: resources/data/hints.ini: [hint:Reload from disk]
msgid ""
"Reload from disk\n"
"Did you know that if you created a newer version of your model, you can "
"simply reload it in PrusaSlicer? Right-click the model in the 3D view and "
"choose Reload from disk. Read more in the documentation."
msgstr ""
"Herlaad van schijf\n"
"Wist u dat als u een nieuwere versie van het model heeft gemaakt, u deze "
"eenvoudig kunt herladen in PrusaSlicer? Rechtermuisklik op het model in de "
"modelweergave en kies Herlaad van schijf. Lees meer in de documentatie."

#: resources/data/hints.ini: [hint:Hiding sidebar]
msgid ""
"Hiding sidebar\n"
"Did you know that you can hide the right sidebar using the shortcut <b>Shift"
"+Tab</b>? You can also enable the icon for this from the<a>Preferences</a>."
msgstr ""
"Verberg zijbalk\n"
"Wist u dat u de rechter zijbalk kan verbergen met de sneltoets <b>Shift+Tab</"
"b>? U kunt ook het icoontje aanzetten via de <a>Voorkeuren</a>."

#: resources/data/hints.ini: [hint:Perspective camera]
msgid ""
"Perspective camera\n"
"Did you know that you can use the <b>K</b> key to quickly switch between an "
"orthographic and perspective camera?"
msgstr ""
"Perspectiefweergave\n"
"Wist u dat u de <b>K<b/>-toets kunt gebruiken om snel te schakelen tussen "
"orthografische en perspectiefweergave?"

#: resources/data/hints.ini: [hint:Camera Views]
msgid ""
"Camera Views\n"
"Did you know that you can use the number keys <b>0-6</b> to quickly switch "
"between predefined camera angles?"
msgstr ""
"Weergave\n"
"Wist us dat u de getallen <b>0-6</b> kunt gebruiken voor het snel schakelen "
"tussen vooraf ingestelde camerahoeken?"

#: resources/data/hints.ini: [hint:Place on face]
msgid ""
"Place on face\n"
"Did you know that you can quickly orient a model so that one of its faces "
"sits on the print bed? Select the<a>Place on face</a>function or press the "
"<b>F</b> key."
msgstr ""
"Plaats op vlak\n"
"Wist u dat u snel een model zo kan oriënteren dat het met een vlak van het "
"model op het bed geplaatst wordt? Selecteer <a>Plaats op vlak</a>-functie of "
"druk op de <b>F</b>-toets."

#: resources/data/hints.ini: [hint:Set number of instances]
msgid ""
"Set number of instances\n"
"Did you know that you can right-click a model and set an exact number of "
"instances instead of copy-pasting it several times?"
msgstr ""
"Stel aantal instanties in\n"
"Wist u dat u met de rechtermuisklik op een model een exact aantal instanties "
"kan instellen zonder meerdere keren te kopiëren en plakken?"

#: resources/data/hints.ini: [hint:Combine infill]
msgid ""
"Combine infill\n"
"Did you know that you can print the infill with a higher layer height "
"compared to perimeters to save print time using the setting<a>Combine infill "
"every</a>."
msgstr ""
"Combineer vulling\n"
"Wist u dat u tijd kunt besparen door de laagdikte van de vulling te "
"vermenigvuldigen ten opzichte van die van de perimeters met de instelling "
"<a>Combineer vulling elke</a>."

#: resources/data/hints.ini: [hint:Variable layer height]
msgid ""
"Variable layer height\n"
"Did you know that you can print different regions of your model with a "
"different layer height and smooth the transitions between them? Try "
"the<a>Variable layer height tool</a>. (Not available for SLA printers.)"
msgstr ""
"Variabele laagdikte\n"
"Wist u dat u verschillende delen van uw model kunt printen met een "
"verschillende laagdikte om zo transities tussen delen vloeiender te maken? "
"Probeer de <a>Variabele laagdikte</a>. (Niet beschikbaar voor SLA printers.)"

#: resources/data/hints.ini: [hint:Undo/redo history]
msgid ""
"Undo/redo history\n"
"Did you know that you can right-click the<a>undo/redo arrows</a>to see the "
"history of changes and to undo or redo several actions at once?"
msgstr ""
"Ongedaan maken / Opnieuw doen lijst\n"
"Wist u dat u met de rechtermuisklik op <a>Ongedaan maken / opnieuw doen "
"pijlen</a> kunt klikken voor een lijst van aanpassingen en meerdere acties "
"tegelijk kunt doen?"

#: resources/data/hints.ini: [hint:Different layer height for each model]
msgid ""
"Different layer height for each model\n"
"Did you know that you can print each model on the plater with a different "
"layer height? Right-click the model in the 3D view, choose Layers and "
"Perimeters and adjust the values in the right panel. Read more in the "
"documentation."
msgstr ""
"Verschillende laagdikte voor elk model\n"
"Wist u dat u elk model op het bed met een andere laagdikte kunt printen? "
"Rechtermuisklik op het model in de modelweergave, kies Lagen en Perimeters "
"en pas de waarde aan in het rechter menu. Lees meer in de documentatie."

#: resources/data/hints.ini: [hint:Solid infill threshold area]
msgid ""
"Solid infill threshold area\n"
"Did you know that you can make parts of your model with a small cross-"
"section be filled with solid infill automatically? Set the<a>Solid infill "
"threshold area</a>. (Expert mode only.)"
msgstr ""
"Dichte vulling bij oppervlak\n"
"Wist u dat u delen van uw model met een klein doorsnee-oppervlak automatisch "
"met dichte vulling kan vullen? Stel de optie <a>Dichte vulling bij "
"oppervlak</a> in. (alleen in expertmodus)."

#: resources/data/hints.ini: [hint:Search functionality]
msgid ""
"Search functionality\n"
"Did you know that you use the<a>Search</a>tool to quickly find a specific "
"PrusaSlicer setting? Or use the familiar shortcut <b>Ctrl+F</b>."
msgstr ""
"Zoekfuncties\n"
"Wist u dat u de <a>Zoekfunctie</a> kunt gebruiken om snel een specifieke "
"instelling in PrusaSlicer te vinden? Of gebruik de bekende sneltoets <b>Ctrl"
"+F</b>."

#: resources/data/hints.ini: [hint:Box selection]
msgid ""
"Box selection\n"
"Did you know that you can do a box selection with Shift+Mouse drag? You can "
"also box-deselect objects with <b>Alt+Mouse drag</b>."
msgstr ""
"Boxselectie\n"
"Wist u dat u een boxselectie kunt doen door Shift in te drukken en dan met "
"de muis te slepen? U kunt ook deselecteren op deze manier met <b>Alt+muis "
"bewegen</b>."

#: resources/data/hints.ini: [hint:Zoom on selected objects or all if none
#: selected]
msgid ""
"Zoom on selected objects or on all objects if none selected\n"
"Did you know that you can zoom in on selected objects by pressing the <b>Z</"
"b> key? If none are selected, the camera will zoom on all objects in the "
"scene."
msgstr ""
"Zoom op geselecteerde objecten of op alle objecten als geen geselecteerd is\n"
"Wist u dat u in kunt zoomen op geselecteerde objecten door te drukken op de "
"<b>Z</b>-toets? Als niets geselecteerd is, wordt ingezoomd op alle objecten."

#: resources/data/hints.ini: [hint:Printable toggle]
msgid ""
"Printable toggle\n"
"Did you know that you can disable the G-code generation for the selected "
"model without having to move or delete it? Toggle the Printable property of "
"a model from the Right-click context menu."
msgstr ""
"Als printbaar instellen\n"
"Wist u dat u G-code-generatie kunt uitzetten voor geselecteerde modellen "
"zonder deze te verplaatsen of verwijderen? Zet de Printbaar-optie aan of uit "
"van een model met de rechtermuisklik op een object."

#: resources/data/hints.ini: [hint:Mirror]
msgid ""
"Mirror\n"
"Did you know that you can mirror the selected model to create a reversed "
"version of it? Right-click the model, select Mirror and pick the mirror axis."
msgstr ""
"Spiegelen\n"
"Wist u dat u de geselecteerde modellen kunt spiegelen om een omgekeerd "
"object te verkrijgen? Rechtermuisklik op het model, kies voor Spiegelen en "
"kies over welke as gespiegeld moet worden."

#: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45
#: degrees]
msgid ""
"PageUp / PageDown quick rotation by 45 degrees\n"
"Did you know that you can quickly rotate selected models by 45 degrees "
"around the Z-axis clockwise or counter-clockwise by pressing <b>Page Up</b> "
"or <b>Page Down</b> respectively?"
msgstr ""
"PageUp / PageDown snel roteren bij 45 graden\n"
"Wist u dat u snel modellen kunt roteren over 45 graden rond de Z-as (met de "
"klok mee of er tegenin) door te klikken op de <b>PageUp</b>- of <b>PageDown</"
"b>-toetsen?"

#: resources/data/hints.ini: [hint:Load config from G-code]
msgid ""
"Load config from G-code\n"
"Did you know that you can use File-Import-Import Config to load print, "
"filament and printer profiles from an existing G-code file? Similarly, you "
"can use File-Import-Import SL1 / SL1S archive, which also lets you "
"reconstruct 3D models from the voxel data."
msgstr ""
"Laad configuratie van G-code\n"
"Wist u dat u een configuratie voor printen, filament, en printerprofielen "
"kunt laden door te klikken op Bestand - Importeer - Importeer configuratie? "
"Dit geldt ook voor SL1 / SL1S archieven die u een 3D-model laten "
"reconstrueren van de voxel-data."

#: resources/data/hints.ini: [hint:Ironing]
msgid ""
"Ironing\n"
"Did you know that you can smooth top surfaces of prints using Ironing? The "
"nozzle will run a special second infill phase at the same layer to fill in "
"holes and flatten any lifted plastic. Read more in the documentation. "
"(Requires Advanced or Expert mode.)"
msgstr ""
"Strijken\n"
"Wist u dat u een glad bovenoppervlak kunt maken door deze te laten strijken? "
"De nozzle gaat dan nogmaals over het oppervlak om kleine gaatjes te vullen "
"en oneffenheden plat te drukken (vereist geavanceerde of expertmodus). Lees "
"meer in de documentatie."

#: resources/data/hints.ini: [hint:Paint-on supports]
msgid ""
"Paint-on supports\n"
"Did you know that you can paint directly on the object and select areas, "
"where supports should be enforced or blocked? Try the<a>Paint-on supports</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""
"Support schilderen\n"
"Wist u dat u direct op het model regios kunt schilderen waar support moet of "
"niet mag worden geplaatst? Probeer de <a>support schilderen</a>-functie "
"(vereist geavanceerde of expertmodus)."

#: resources/data/hints.ini: [hint:Paint-on seam]
msgid ""
"Paint-on seam\n"
"Did you know that you can paint directly on the object and select where to "
"place the start/endpoint of each perimeter loop? Try the<a>Seam painting</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""
"Naad schilderen\n"
"Wist u dat u direct op het model regios kunt schilderen waar de naad zich "
"moet bevinden? Probeer de <a>Naad schilderen</a>-functie (vereist "
"geavanceerde of expertmodus)."

#: resources/data/hints.ini: [hint:Insert Pause]
msgid ""
"Insert Pause\n"
"Did you know that you can schedule the print to pause at a specific layer? "
"Right-click the layer slider in the Preview and select Add pause print "
"(M601). This can be used to insert magnets, weights or nuts into your "
"prints. Read more in the documentation."
msgstr ""
"Pauze invoegen\n"
"Wist u dat u een pauze kunt inplannen op een specifieke laag? "
"Rechtermuisklik op de slider in de sliceweergave en selecteer Voeg pauze toe "
"(M601). Dit kan handig zijn voor het plaatsen van magneetjes, gewichtjes, "
"moertjes, etc. in het model. Lees meer in de documentatie."

#: resources/data/hints.ini: [hint:Insert Custom G-code]
msgid ""
"Insert Custom G-code\n"
"Did you know that you can insert a custom G-code at a specific layer? Left-"
"click the layer in the Preview, Right-click the plus icon and select Add "
"custom G-code. With this function you can, for example, create a temperature "
"tower. Read more in the documentation."
msgstr ""
"Custom G-code invoegen\n"
"Wist u dat u een custom G-code kunt invoegen op een specifieke laag? "
"Linkermuisklik op de laag in de voorbeeldweergave. Dan rechtermuisklik het "
"plus-icoon en selecteer Voeg custom G-code toe. Met deze functie kunt u "
"bijvoorbeeld een temperatuurtoren printen. Lees meer in de documentatie."

#: resources/data/hints.ini: [hint:Configuration snapshots]
msgid ""
"Configuration snapshots\n"
"Did you know that you can roll back to a complete backup of all system and "
"user profiles? You can view and move back and forth between snapshots using "
"the Configuration - <a>Configuration snapshots menu</a>."
msgstr ""
"Configuratiesnapshots\n"
"Wist u dat u terug kunt gaan naar een complete backup van alle systeem- en "
"gebruikersprofielen? U kunt heen en weer bewegen tussen snapshots door "
"middel van het <a>Configuratiesnapshots-menu</a>."

#: resources/data/hints.ini: [hint:Minimum shell thickness]
msgid ""
"Minimum shell thickness\n"
"Did you know that instead of the number of top and bottom layers, you can "
"define the<a>Minimum shell thickness</a>in millimeters? This feature is "
"especially useful when using the variable layer height function."
msgstr ""
"Minimale shelldikte\n"
"Wist u dat u in plaats van het aantal boven- en onderlagen de <a>Minimale "
"shelldikte</a> kunt aangeven? Deze optie is handig wanneer een variabele "
"laagdikte wordt gebruikt."

#: resources/data/hints.ini: [hint:Settings in non-modal window]
msgid ""
"Settings in non-modal window\n"
"Did you know that you can open the Settings in a new non-modal window? This "
"means you can have settings open on one screen and the G-code Preview on the "
"other. Go to the<a>Preferences</a>and select Settings in non-modal window."
msgstr ""
"Instellingen in niet-modaal venster\n"
"Wist u dat u de instellingen kunt openen in een niet-modaal venster? Dit "
"houdt in dat u de instellingen open kunt hebben staan op één scherm en de "
"sliceweergave op een ander scherm. Ga naar <a>Voorkeuren</a> en selecteer "
"Instellingen in niet-modaal venster."

#: resources/data/hints.ini: [hint:Adaptive infills]
msgid ""
"Adaptive infills\n"
"Did you know that you can use the Adaptive cubic and Support cubic infills "
"to decrease the print time and lower the filament consumption? Read more in "
"the documentation."
msgstr ""
"Adaptieve vulling\n"
"Wist u dat u adaptief kubische en ondersteunend kubische vulling kunt "
"gebruiken om de printtijd te verkorten en de hoeveelheid filament te "
"reduceren? Lees meer in de documentatie."

#: resources/data/hints.ini: [hint:Lightning infill]
msgid ""
"Lightning infill\n"
"Did you know that you can use the Lightning infill to support only the top "
"surfaces, save a lot of the filament, and decrease the print time? Read more "
"in the documentation."
msgstr ""
"Bliksemvulling\n"
"Wist u dat u bliksemvulling kunt toepassen om alleen topvlakken te "
"ondersteunen? Dit bespaart veel filament en reduceert de printtijd. Lees "
"meer in de documentatie."

#: resources/data/hints.ini: [hint:Fullscreen mode]
msgid ""
"Fullscreen mode\n"
"Did you know that you can switch PrusaSlicer to fullscreen mode? Use the "
"<b>F11</b> hotkey."
msgstr ""
"Volledig scherm\n"
"Wist u dat u in PrusaSlicer kunt wisselen naar volledig scherm? Gebruik "
"daarvoor de <b>F11</b>-toets."

#: resources/data/hints.ini: [hint:Printables integration]
msgid ""
"Printables.com integration\n"
"Did you know that when you are browsing Printables.com, you can send 3D "
"model files to PrusaSlicer with a single click? Learn more in the "
"documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Cut tool]
msgid ""
"Cut tool\n"
"Did you know that you can cut a model at any angle and even create aligning "
"pins with the updated <a>Cut tool</a>? Learn more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Measurement tool]
msgid ""
"Measurement tool\n"
"Did you know that you can <a>measure</a> the distances between points, edges "
"and planes, the radius of a hole or the angle between edges or planes? Learn "
"more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Text tool]
msgid ""
"Text tool\n"
"Did you know that you can add custom text labels to your models or even use "
"the text as a modifier? Learn more in the documentation."
msgstr ""

#: ../src/common/debugrpt.cpp:586
msgid ""
"\n"
"Please send this report to the program maintainer, thank you!\n"
msgstr ""
"\n"
"Zend dit rapport naar de programmabeheerder, bedankt!\n"

#: ../src/richtext/richtextstyledlg.cpp:210
#: ../src/richtext/richtextstyledlg.cpp:222
msgid " "
msgstr " "

#: ../src/generic/dbgrptg.cpp:326
msgid "              Thank you and we're sorry for the inconvenience!\n"
msgstr "              Dank u en onze excuses voor het ongemak!\n"

#: ../src/common/prntbase.cpp:573
#, c-format
msgid " (copy %d of %d)"
msgstr " (%d van %d kopiëren)"

#: ../src/common/log.cpp:421
#, c-format
msgid " (error %ld: %s)"
msgstr " (fout %ld: %s)"

#: ../src/common/imagtiff.cpp:72
#, c-format
msgid " (in module \"%s\")"
msgstr " (in module \"%s\")"

#: ../src/osx/core/secretstore.cpp:138
msgid " (while overwriting an existing item)"
msgstr ""

#: ../src/common/docview.cpp:1642
msgid " - "
msgstr " - "

#: ../src/richtext/richtextprint.cpp:593 ../src/html/htmprint.cpp:714
msgid " Preview"
msgstr " Voorbeeld"

#: ../src/common/fontcmn.cpp:824
msgid " bold"
msgstr "vet"

#: ../src/common/fontcmn.cpp:840
msgid " italic"
msgstr "cursief"

#: ../src/common/fontcmn.cpp:820
msgid " light"
msgstr "licht"

#: ../src/common/fontcmn.cpp:807
msgid " strikethrough"
msgstr " doorhalen"

#: ../src/common/paper.cpp:117
msgid "#10 Envelope, 4 1/8 x 9 1/2 in"
msgstr "Envelop nr.10, 4 1/8 x 9 1/2 inch"

#: ../src/common/paper.cpp:118
msgid "#11 Envelope, 4 1/2 x 10 3/8 in"
msgstr "Envelop nr.11, 4 1/2 x 10 3/8 inch"

#: ../src/common/paper.cpp:119
msgid "#12 Envelope, 4 3/4 x 11 in"
msgstr "Envelop nr.12, 4 3/4 x 11 inch"

#: ../src/common/paper.cpp:120
msgid "#14 Envelope, 5 x 11 1/2 in"
msgstr "Envelop nr.14, 5 x 11 1/2 inch"

#: ../src/common/paper.cpp:116
msgid "#9 Envelope, 3 7/8 x 8 7/8 in"
msgstr "Envelop nr.9, 3 7/8 x 8 7/8 inch"

#: ../src/html/helpwnd.cpp:1031
#, c-format
msgid "%d of %lu"
msgstr "%d of %lu"

#: ../src/html/helpwnd.cpp:1678
#, c-format
msgid "%i of %u"
msgstr "%i van %u"

#: ../src/generic/filectrlg.cpp:279
#, c-format
msgid "%ld byte"
msgid_plural "%ld bytes"
msgstr[0] "%ld byte"
msgstr[1] "%ld bytes"

#: ../src/html/helpwnd.cpp:1033
#, c-format
msgid "%lu of %lu"
msgstr "%lu van %lu"

#: ../src/generic/datavgen.cpp:6028
#, fuzzy, c-format
msgid "%s (%d items)"
msgstr "%s (of %s)"

#: ../src/common/cmdline.cpp:1221
#, c-format
msgid "%s (or %s)"
msgstr "%s (of %s)"

#: ../src/generic/logg.cpp:224
#, c-format
msgid "%s Error"
msgstr "%s Fout"

#: ../src/generic/logg.cpp:236
#, c-format
msgid "%s Information"
msgstr "%s Informatie"

#: ../src/generic/preferencesg.cpp:113
#, c-format
msgid "%s Preferences"
msgstr "%s voorkeuren"

#: ../src/generic/logg.cpp:228
#, c-format
msgid "%s Warning"
msgstr "%s Waarschuwing"

#: ../src/common/tarstrm.cpp:1319
#, c-format
msgid "%s did not fit the tar header for entry '%s'"
msgstr "%s paste niet bij de tar-header voor regel '%s'"

#: ../src/common/fldlgcmn.cpp:124
#, c-format
msgid "%s files (%s)|%s"
msgstr "%s bestanden (%s)|%s"

#: ../src/html/helpwnd.cpp:1716
#, c-format
msgid "%u of %u"
msgstr "%u van %u"

#: ../src/common/stockitem.cpp:139
msgid "&About"
msgstr "&Over"

#: ../src/common/stockitem.cpp:207
msgid "&Actual Size"
msgstr "&Werkelijke grootte"

#: ../src/richtext/richtextindentspage.cpp:262
msgid "&After a paragraph:"
msgstr "&Na een paragraaf:"

#: ../src/richtext/richtextindentspage.cpp:128
#: ../src/richtext/richtextliststylepage.cpp:319
msgid "&Alignment"
msgstr "&Uitlijning"

#: ../src/common/stockitem.cpp:141
msgid "&Apply"
msgstr "Toe&passen"

#: ../src/richtext/richtextstyledlg.cpp:251
msgid "&Apply Style"
msgstr "Stijl toe&passen"

#: ../src/msw/mdi.cpp:179
msgid "&Arrange Icons"
msgstr "&Pictogrammen Schikken"

#: ../src/common/stockitem.cpp:195
msgid "&Ascending"
msgstr "&Oplopend"

#: ../src/common/stockitem.cpp:142
msgid "&Back"
msgstr "&Terug"

#: ../src/richtext/richtextstylepage.cpp:115
msgid "&Based on:"
msgstr "Ge&baseerd op:"

#: ../src/richtext/richtextindentspage.cpp:253
msgid "&Before a paragraph:"
msgstr "&Voor een paragraaf:"

#: ../src/richtext/richtextfontpage.cpp:262
msgid "&Bg colour:"
msgstr "&Bg kleur:"

#: ../src/richtext/richtextbackgroundpage.cpp:298
msgid "&Blur distance:"
msgstr "&Vervagingsafstand:"

#: ../src/common/stockitem.cpp:143
msgid "&Bold"
msgstr "&Vet"

#: ../src/common/stockitem.cpp:144
msgid "&Bottom"
msgstr "&Bodem"

#: ../src/richtext/richtextborderspage.cpp:345
#: ../src/richtext/richtextborderspage.cpp:513
#: ../src/richtext/richtextmarginspage.cpp:259
#: ../src/richtext/richtextmarginspage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:637
#: ../src/richtext/richtextsizepage.cpp:644
msgid "&Bottom:"
msgstr "&Bodem:"

#: ../include/wx/richtext/richtextbuffer.h:3866
msgid "&Box"
msgstr "&Vak"

#: ../src/richtext/richtextliststylepage.cpp:210
#: ../src/richtext/richtextbulletspage.cpp:146
msgid "&Bullet style:"
msgstr "&Opsommingstijl:"

#: ../src/common/stockitem.cpp:146
msgid "&CD-Rom"
msgstr "&CD-rom"

#: ../src/generic/wizard.cpp:434 ../src/generic/fontdlgg.cpp:470
#: ../src/generic/fontdlgg.cpp:489 ../src/osx/carbon/fontdlg.cpp:402
#: ../src/common/dlgcmn.cpp:279 ../src/common/stockitem.cpp:145
msgid "&Cancel"
msgstr "&Annuleren"

#: ../src/msw/mdi.cpp:175
msgid "&Cascade"
msgstr "&Trapsgewijs"

#: ../include/wx/richtext/richtextbuffer.h:5960
msgid "&Cell"
msgstr "&Cel"

#: ../src/richtext/richtextsymboldlg.cpp:439
msgid "&Character code:"
msgstr "&Lettertekencode:"

#: ../src/common/stockitem.cpp:147
msgid "&Clear"
msgstr "&Wissen"

#: ../src/generic/logg.cpp:516 ../src/common/stockitem.cpp:148
#: ../src/common/prntbase.cpp:1600 ../src/univ/themes/win32.cpp:3756
msgid "&Close"
msgstr "&Sluiten"

#: ../src/common/stockitem.cpp:193
msgid "&Color"
msgstr "&Kleur:"

#: ../src/richtext/richtextfontpage.cpp:249
msgid "&Colour:"
msgstr "&Kleur:"

#: ../src/common/stockitem.cpp:149
msgid "&Convert"
msgstr "&Converteren"

#: ../src/generic/hyperlinkg.cpp:156
msgid "&Copy URL"
msgstr "URL &kopiëren"

#: ../src/common/headerctrlcmn.cpp:306
msgid "&Customize..."
msgstr "&Aanpassen..."

#: ../src/generic/dbgrptg.cpp:334
msgid "&Debug report preview:"
msgstr "Voorbeeld &foutopsporingsrapport:"

#: ../src/richtext/richtexttabspage.cpp:138
#: ../src/richtext/richtextctrl.cpp:335 ../src/osx/textctrl_osx.cpp:579
#: ../src/common/stockitem.cpp:152 ../src/msw/textctrl.cpp:2510
msgid "&Delete"
msgstr "&Verwijderen"

#: ../src/richtext/richtextstyledlg.cpp:269
msgid "&Delete Style..."
msgstr "Stijl &verwijderen..."

#: ../src/common/stockitem.cpp:196
msgid "&Descending"
msgstr "&Aflopend"

#: ../src/generic/logg.cpp:682
msgid "&Details"
msgstr "&Details"

#: ../src/common/stockitem.cpp:153
msgid "&Down"
msgstr "O&mlaag"

#: ../src/richtext/richtextstyledlg.cpp:263
msgid "&Edit Style..."
msgstr "S&tijl bewerken..."

#: ../src/common/stockitem.cpp:155
msgid "&Execute"
msgstr "&Uitvoeren"

#: ../src/common/stockitem.cpp:158
msgid "&Find"
msgstr "&Zoeken"

#: ../src/common/stockitem.cpp:159
msgid "&First"
msgstr "&Eerste"

#: ../src/richtext/richtextsizepage.cpp:244
msgid "&Floating mode:"
msgstr "&Zwevende modus:"

#: ../src/common/stockitem.cpp:160
msgid "&Floppy"
msgstr "&Diskette"

#: ../src/common/stockitem.cpp:194
msgid "&Font"
msgstr "&Lettertype"

#: ../src/generic/fontdlgg.cpp:371
msgid "&Font family:"
msgstr "&Lettertypefamilie:"

#: ../src/richtext/richtextliststylepage.cpp:194
msgid "&Font for Level..."
msgstr "&Lettertype voor niveau..."

#: ../src/richtext/richtextfontpage.cpp:147
#: ../src/richtext/richtextsymboldlg.cpp:400
msgid "&Font:"
msgstr "&Lettertype:"

#: ../src/common/stockitem.cpp:161
msgid "&Forward"
msgstr "&Verder"

#: ../src/richtext/richtextsymboldlg.cpp:451
msgid "&From:"
msgstr "&Van:"

#: ../src/common/stockitem.cpp:162
msgid "&Harddisk"
msgstr "&Hardeschijf"

#: ../src/richtext/richtextsizepage.cpp:351
#: ../src/richtext/richtextsizepage.cpp:358
msgid "&Height:"
msgstr "&Hoogte:"

#: ../include/wx/richmsgdlg.h:30
msgid "&Hide details"
msgstr "&Verbergen details"

#: ../src/common/stockitem.cpp:164
msgid "&Home"
msgstr "S&tart"

#: ../src/richtext/richtextbackgroundpage.cpp:212
msgid "&Horizontal offset:"
msgstr "&Horizontale verschuiving:"

#: ../src/richtext/richtextindentspage.cpp:184
#: ../src/richtext/richtextliststylepage.cpp:372
msgid "&Indentation (tenths of a mm)"
msgstr "I&nspringing (tienden van een mm)"

#: ../src/richtext/richtextindentspage.cpp:167
#: ../src/richtext/richtextliststylepage.cpp:356
msgid "&Indeterminate"
msgstr "&Onduidelijk"

#: ../src/common/stockitem.cpp:166
msgid "&Index"
msgstr "&Index"

#: ../src/common/stockitem.cpp:167
msgid "&Info"
msgstr "&Info"

#: ../src/common/stockitem.cpp:168
msgid "&Italic"
msgstr "C&ursief"

#: ../src/common/stockitem.cpp:169
msgid "&Jump to"
msgstr "&Spring naar"

#: ../src/richtext/richtextindentspage.cpp:153
#: ../src/richtext/richtextliststylepage.cpp:342
msgid "&Justified"
msgstr "Uit&gevuld"

#: ../src/common/stockitem.cpp:174
msgid "&Last"
msgstr "&Laatste"

#: ../src/richtext/richtextindentspage.cpp:139
#: ../src/richtext/richtextliststylepage.cpp:328
msgid "&Left"
msgstr "&Links"

#: ../src/richtext/richtextindentspage.cpp:195
#: ../src/richtext/richtextborderspage.cpp:243
#: ../src/richtext/richtextborderspage.cpp:411
#: ../src/richtext/richtextliststylepage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:186
#: ../src/richtext/richtextmarginspage.cpp:300
#: ../src/richtext/richtextsizepage.cpp:532
#: ../src/richtext/richtextsizepage.cpp:539
msgid "&Left:"
msgstr "&Links:"

#: ../src/richtext/richtextliststylepage.cpp:183
msgid "&List level:"
msgstr "&Lijstniveau:"

#: ../src/generic/logg.cpp:517
msgid "&Log"
msgstr "&Log"

#: ../src/univ/themes/win32.cpp:3748
msgid "&Move"
msgstr "&Verplaatsen"

#: ../src/richtext/richtextsizepage.cpp:672
msgid "&Move the object to:"
msgstr "&Verplaats object naar:"

#: ../src/common/stockitem.cpp:175
msgid "&Network"
msgstr "&Netwerk"

#: ../src/richtext/richtexttabspage.cpp:132 ../src/common/stockitem.cpp:176
msgid "&New"
msgstr "&Nieuw"

#: ../src/aui/tabmdi.cpp:111 ../src/generic/mdig.cpp:100 ../src/msw/mdi.cpp:180
msgid "&Next"
msgstr "&Volgende"

#: ../src/richtext/richtextsizepage.cpp:681
msgid "&Next Paragraph"
msgstr "&Volgende paragraaf"

#: ../src/generic/tipdlg.cpp:240
msgid "&Next Tip"
msgstr "&Volgende tip"

#: ../src/richtext/richtextstylepage.cpp:125
msgid "&Next style:"
msgstr "Volge&nde stijl:"

#: ../src/common/stockitem.cpp:177 ../src/msw/msgdlg.cpp:441
msgid "&No"
msgstr "&Nee"

#: ../src/generic/dbgrptg.cpp:356
msgid "&Notes:"
msgstr "&Notities:"

#: ../src/richtext/richtextbulletspage.cpp:251
msgid "&Number:"
msgstr "&Nummer:"

#: ../src/generic/fontdlgg.cpp:475 ../src/generic/fontdlgg.cpp:482
#: ../src/osx/carbon/fontdlg.cpp:408 ../src/common/stockitem.cpp:178
msgid "&OK"
msgstr "&OK"

#: ../src/generic/dbgrptg.cpp:342 ../src/common/stockitem.cpp:179
msgid "&Open..."
msgstr "&Openen..."

#: ../src/richtext/richtextindentspage.cpp:222
msgid "&Outline level:"
msgstr "&Outline niveau:"

#: ../src/richtext/richtextindentspage.cpp:293
msgid "&Page Break"
msgstr "&Pagina-einde"

#: ../include/wx/richtext/richtextbuffer.h:5010
msgid "&Picture"
msgstr "&Afbeelding"

#: ../src/generic/fontdlgg.cpp:422
msgid "&Point size:"
msgstr "&Puntgrootte:"

#: ../src/richtext/richtexttabspage.cpp:110
msgid "&Position (tenths of a mm):"
msgstr "&Positie (tienden van een mm):"

#: ../src/richtext/richtextsizepage.cpp:514
msgid "&Position mode:"
msgstr "&Positiemodus:"

#: ../src/aui/tabmdi.cpp:112 ../src/generic/mdig.cpp:101 ../src/msw/mdi.cpp:181
msgid "&Previous"
msgstr "&Vorig"

#: ../src/richtext/richtextsizepage.cpp:675
msgid "&Previous Paragraph"
msgstr "&Vorige paragraaf"

#: ../src/common/stockitem.cpp:183
msgid "&Print..."
msgstr "Af&drukken..."

#: ../src/richtext/richtextctrl.cpp:339 ../src/richtext/richtextctrl.cpp:5514
#: ../src/common/stockitem.cpp:184
msgid "&Properties"
msgstr "Eigenscha&ppen"

#: ../src/common/cmdproc.cpp:289 ../src/common/cmdproc.cpp:309
msgid "&Redo "
msgstr "Opnie&uw "

#: ../src/richtext/richtextstyledlg.cpp:257
msgid "&Rename Style..."
msgstr "Stijl he&rnoemen…"

#: ../src/generic/fdrepdlg.cpp:179
msgid "&Replace"
msgstr "&Vervangen"

#: ../src/richtext/richtextstyledlg.cpp:287
msgid "&Restart numbering"
msgstr "Nummering he&rstarten..."

#: ../src/univ/themes/win32.cpp:3747
msgid "&Restore"
msgstr "&Herstellen"

#: ../src/richtext/richtextindentspage.cpp:146
#: ../src/richtext/richtextliststylepage.cpp:335
msgid "&Right"
msgstr "&Rechts"

#: ../src/richtext/richtextindentspage.cpp:213
#: ../src/richtext/richtextborderspage.cpp:277
#: ../src/richtext/richtextborderspage.cpp:445
#: ../src/richtext/richtextliststylepage.cpp:399
#: ../src/richtext/richtextmarginspage.cpp:211
#: ../src/richtext/richtextmarginspage.cpp:325
#: ../src/richtext/richtextsizepage.cpp:602
#: ../src/richtext/richtextsizepage.cpp:609
msgid "&Right:"
msgstr "&Rechts:"

#: ../src/common/stockitem.cpp:190
msgid "&Save"
msgstr "Op&slaan"

#: ../src/common/stockitem.cpp:191
msgid "&Save as"
msgstr "&Opslaan Als"

#: ../include/wx/richmsgdlg.h:29
msgid "&See details"
msgstr "&Zie details"

#: ../src/generic/tipdlg.cpp:236
msgid "&Show tips at startup"
msgstr "&Toon tips bij opstarten"

#: ../src/univ/themes/win32.cpp:3750
msgid "&Size"
msgstr "&Grootte"

#: ../src/richtext/richtextfontpage.cpp:159
msgid "&Size:"
msgstr "&Grootte:"

#: ../src/generic/progdlgg.cpp:252
msgid "&Skip"
msgstr "Over&slaan"

#: ../src/richtext/richtextindentspage.cpp:242
#: ../src/richtext/richtextliststylepage.cpp:417
msgid "&Spacing (tenths of a mm)"
msgstr "&Tussenruimte (tienden van een mm)"

#: ../src/common/stockitem.cpp:197
msgid "&Spell Check"
msgstr "&Spellingscontrole"

#: ../src/common/stockitem.cpp:198
msgid "&Stop"
msgstr "&Stoppen"

#: ../src/richtext/richtextfontpage.cpp:275 ../src/common/stockitem.cpp:199
msgid "&Strikethrough"
msgstr "&Doorhalen"

#: ../src/generic/fontdlgg.cpp:382 ../src/richtext/richtextstylepage.cpp:106
msgid "&Style:"
msgstr "&Stijl:"

#: ../src/richtext/richtextstyledlg.cpp:198
msgid "&Styles:"
msgstr "&Stijlen:"

#: ../src/richtext/richtextsymboldlg.cpp:413
msgid "&Subset:"
msgstr "&Subset:"

#: ../src/richtext/richtextliststylepage.cpp:268
#: ../src/richtext/richtextbulletspage.cpp:209
msgid "&Symbol:"
msgstr "&Symbool:"

#: ../src/richtext/richtextborderspage.cpp:381
#: ../src/richtext/richtextborderspage.cpp:549
msgid "&Synchronize values"
msgstr "Waarden &synchroniseren"

#: ../include/wx/richtext/richtextbuffer.h:6069
msgid "&Table"
msgstr "&Tabel"

#: ../src/common/stockitem.cpp:200
msgid "&Top"
msgstr "&Top"

#: ../src/richtext/richtextborderspage.cpp:311
#: ../src/richtext/richtextborderspage.cpp:479
#: ../src/richtext/richtextmarginspage.cpp:234
#: ../src/richtext/richtextmarginspage.cpp:348
#: ../src/richtext/richtextsizepage.cpp:567
#: ../src/richtext/richtextsizepage.cpp:574
msgid "&Top:"
msgstr "&Top:"

#: ../src/generic/fontdlgg.cpp:444 ../src/common/stockitem.cpp:202
msgid "&Underline"
msgstr "Onderstre&pen"

#: ../src/richtext/richtextfontpage.cpp:234
msgid "&Underlining:"
msgstr "Onderstre&ping:"

#: ../src/common/cmdproc.cpp:265
msgid "&Undo "
msgstr "Maak &ongedaan: "

#: ../src/common/stockitem.cpp:204
msgid "&Unindent"
msgstr "&Niet Inspringen"

#: ../src/common/stockitem.cpp:205
msgid "&Up"
msgstr "&Omhoog"

#: ../src/richtext/richtextsizepage.cpp:278
msgid "&Vertical alignment:"
msgstr "&Vertikale uitlijning:"

#: ../src/richtext/richtextbackgroundpage.cpp:235
msgid "&Vertical offset:"
msgstr "&Verticale verschuiving:"

#: ../src/generic/dbgrptg.cpp:340
msgid "&View..."
msgstr "&Beeld..."

#: ../src/generic/fontdlgg.cpp:393
msgid "&Weight:"
msgstr "Ge&wicht:"

#: ../src/richtext/richtextsizepage.cpp:317
#: ../src/richtext/richtextsizepage.cpp:324
msgid "&Width:"
msgstr "&Breedte:"

#: ../src/common/stockitem.cpp:206 ../src/msw/msgdlg.cpp:441
msgid "&Yes"
msgstr "&Ja"

#: ../src/common/valtext.cpp:256
#, c-format
msgid "'%s' contains illegal characters"
msgstr "'%s' bevat ongeldige tekens"

#: ../src/common/valtext.cpp:254
#, c-format
msgid "'%s' doesn't consist only of valid characters"
msgstr "'%s' bestaat niet alleen uit geldige tekens"

#: ../src/common/config.cpp:519 ../src/msw/regconf.cpp:258
#, c-format
msgid "'%s' has extra '..', ignored."
msgstr "'%s' heeft extra '..', genegeerd"

#: ../src/common/cmdline.cpp:1113 ../src/common/cmdline.cpp:1131
#, c-format
msgid "'%s' is not a correct numeric value for option '%s'."
msgstr "'%s' is geen geldige numerieke waarde voor optie '%s'."

#: ../src/common/translation.cpp:1100
#, c-format
msgid "'%s' is not a valid message catalog."
msgstr "'%s' is geen geldige berichtcatalogus."

#: ../src/common/valtext.cpp:165
#, c-format
msgid "'%s' is not one of the valid strings"
msgstr "'%s' is niet een van de geldige strings"

#: ../src/common/valtext.cpp:167
#, c-format
msgid "'%s' is one of the invalid strings"
msgstr "'%s' is een van de ongeldige strings"

#: ../src/common/textbuf.cpp:237
#, c-format
msgid "'%s' is probably a binary buffer."
msgstr "'%s' is waarschijnlijk een binaire buffer."

#: ../src/common/valtext.cpp:252
#, c-format
msgid "'%s' should be numeric."
msgstr "'%s' moet numeriek zijn."

#: ../src/common/valtext.cpp:244
#, c-format
msgid "'%s' should only contain ASCII characters."
msgstr "'%s' mag alleen ASCII-tekens bevatten."

#: ../src/common/valtext.cpp:246
#, c-format
msgid "'%s' should only contain alphabetic characters."
msgstr "'%s' mag alleen letters bevatten."

#: ../src/common/valtext.cpp:248
#, c-format
msgid "'%s' should only contain alphabetic or numeric characters."
msgstr "'%s' mag alleen alfa-numerieke tekens bevatten."

#: ../src/common/valtext.cpp:250
#, c-format
msgid "'%s' should only contain digits."
msgstr "'%s' mag alleen cijfers bevatten."

#: ../src/richtext/richtextliststylepage.cpp:229
#: ../src/richtext/richtextbulletspage.cpp:166
msgid "(*)"
msgstr "(*)"

#: ../src/html/helpwnd.cpp:963
msgid "(Help)"
msgstr "(Help)"

#: ../src/richtext/richtextliststylepage.cpp:481
#: ../src/richtext/richtextbulletspage.cpp:273
msgid "(None)"
msgstr "(Geen)"

#: ../src/richtext/richtextsymboldlg.cpp:504
msgid "(Normal text)"
msgstr "(Normale tekst)"

#: ../src/html/helpwnd.cpp:419 ../src/html/helpwnd.cpp:1106
#: ../src/html/helpwnd.cpp:1742
msgid "(bookmarks)"
msgstr "(favorieten)"

#: ../src/richtext/richtextindentspage.cpp:274
#: ../src/richtext/richtextindentspage.cpp:286
#: ../src/richtext/richtextindentspage.cpp:287
#: ../src/richtext/richtextindentspage.cpp:311
#: ../src/richtext/richtextindentspage.cpp:326
#: ../src/richtext/richtextformatdlg.cpp:884
#: ../src/richtext/richtextfontpage.cpp:349
#: ../src/richtext/richtextfontpage.cpp:353
#: ../src/richtext/richtextfontpage.cpp:357
#: ../src/richtext/richtextliststylepage.cpp:448
#: ../src/richtext/richtextliststylepage.cpp:460
#: ../src/richtext/richtextliststylepage.cpp:461
msgid "(none)"
msgstr "(geen)"

#: ../src/richtext/richtextliststylepage.cpp:492
#: ../src/richtext/richtextbulletspage.cpp:284
msgid "*"
msgstr "*"

#: ../src/richtext/richtextliststylepage.cpp:236
#: ../src/richtext/richtextbulletspage.cpp:173
msgid "*)"
msgstr "*)"

#: ../src/richtext/richtextliststylepage.cpp:495
#: ../src/richtext/richtextbulletspage.cpp:287
msgid "+"
msgstr "+"

#: ../src/msw/utils.cpp:1152
msgid ", 64-bit edition"
msgstr ", 64-bit editie"

#: ../src/richtext/richtextliststylepage.cpp:493
#: ../src/richtext/richtextbulletspage.cpp:285
msgid "-"
msgstr "-"

#: ../src/generic/filepickerg.cpp:66
msgid "..."
msgstr "..."

#: ../src/richtext/richtextindentspage.cpp:276
#: ../src/richtext/richtextliststylepage.cpp:450
msgid "1.1"
msgstr "1.1"

#: ../src/richtext/richtextindentspage.cpp:277
#: ../src/richtext/richtextliststylepage.cpp:451
msgid "1.2"
msgstr "1.2"

#: ../src/richtext/richtextindentspage.cpp:278
#: ../src/richtext/richtextliststylepage.cpp:452
msgid "1.3"
msgstr "1.3"

#: ../src/richtext/richtextindentspage.cpp:279
#: ../src/richtext/richtextliststylepage.cpp:453
msgid "1.4"
msgstr "1.4"

#: ../src/richtext/richtextindentspage.cpp:280
#: ../src/richtext/richtextliststylepage.cpp:454
msgid "1.5"
msgstr "1.5"

#: ../src/richtext/richtextindentspage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:455
msgid "1.6"
msgstr "1.6"

#: ../src/richtext/richtextindentspage.cpp:282
#: ../src/richtext/richtextliststylepage.cpp:456
msgid "1.7"
msgstr "1.7"

#: ../src/richtext/richtextindentspage.cpp:283
#: ../src/richtext/richtextliststylepage.cpp:457
msgid "1.8"
msgstr "1.8"

#: ../src/richtext/richtextindentspage.cpp:284
#: ../src/richtext/richtextliststylepage.cpp:458
msgid "1.9"
msgstr "1.9"

#: ../src/common/paper.cpp:140
msgid "10 x 11 in"
msgstr "10 x 11 inch"

#: ../src/common/paper.cpp:113
msgid "10 x 14 in"
msgstr "10 x 14 inch"

#: ../src/common/paper.cpp:114
msgid "11 x 17 in"
msgstr "11 x 17 inch"

#: ../src/common/paper.cpp:184
msgid "12 x 11 in"
msgstr "12 x 11 inch"

#: ../src/common/paper.cpp:141
msgid "15 x 11 in"
msgstr "15 x 11 inch"

#: ../src/richtext/richtextindentspage.cpp:285
#: ../src/richtext/richtextliststylepage.cpp:459
msgid "2"
msgstr "2"

#: ../src/common/paper.cpp:132
msgid "6 3/4 Envelope, 3 5/8 x 6 1/2 in"
msgstr "6 3/4 envelop, 3 5/8 x 6 1/2 inch"

#: ../src/common/paper.cpp:139
msgid "9 x 11 in"
msgstr "9 x 11 inch"

#: ../src/html/htmprint.cpp:431
msgid ": file does not exist!"
msgstr ": bestand bestaat niet!"

#: ../src/common/fontmap.cpp:199
msgid ": unknown charset"
msgstr ": onbekende tekenset"

#: ../src/common/fontmap.cpp:413
msgid ": unknown encoding"
msgstr ": onbekende codering"

#: ../src/osx/carbon/fontdlg.cpp:422 ../src/osx/carbon/fontdlg.cpp:628
#: ../src/osx/carbon/fontdlg.cpp:648
msgid "<Any Decorative>"
msgstr "<Elke Decoratief>"

#: ../src/osx/carbon/fontdlg.cpp:423 ../src/osx/carbon/fontdlg.cpp:630
#: ../src/osx/carbon/fontdlg.cpp:650
msgid "<Any Modern>"
msgstr "<Elke Modern>"

#: ../src/osx/carbon/fontdlg.cpp:421 ../src/osx/carbon/fontdlg.cpp:626
#: ../src/osx/carbon/fontdlg.cpp:646
msgid "<Any Roman>"
msgstr "<Elke Romaans>"

#: ../src/osx/carbon/fontdlg.cpp:424 ../src/osx/carbon/fontdlg.cpp:632
#: ../src/osx/carbon/fontdlg.cpp:652
msgid "<Any Script>"
msgstr "<Elke Script>"

#: ../src/osx/carbon/fontdlg.cpp:425 ../src/osx/carbon/fontdlg.cpp:637
#: ../src/osx/carbon/fontdlg.cpp:656
msgid "<Any Swiss>"
msgstr "<Elke Helvetica>"

#: ../src/osx/carbon/fontdlg.cpp:426 ../src/osx/carbon/fontdlg.cpp:634
#: ../src/osx/carbon/fontdlg.cpp:654
msgid "<Any Teletype>"
msgstr "<Elke Teletype>"

#: ../src/osx/carbon/fontdlg.cpp:420
msgid "<Any>"
msgstr "<Elke>"

#: ../src/generic/filectrlg.cpp:250 ../src/generic/filectrlg.cpp:273
msgid "<DIR>"
msgstr "<DIR>"

#: ../src/generic/filectrlg.cpp:254 ../src/generic/filectrlg.cpp:277
msgid "<DRIVE>"
msgstr "<STATION>"

#: ../src/generic/filectrlg.cpp:252 ../src/generic/filectrlg.cpp:275
msgid "<LINK>"
msgstr "<LINK>"

#: ../src/html/helpwnd.cpp:1266
msgid "<b><i>Bold italic face.</i></b><br>"
msgstr "<b><i>Vet cursief lettertype.</i></b><br>"

#: ../src/html/helpwnd.cpp:1270
msgid "<b><i>bold italic <u>underlined</u></i></b><br>"
msgstr "<b><i>vet cursief <u>onderstreept</u></i></b><br>"

#: ../src/html/helpwnd.cpp:1265
msgid "<b>Bold face.</b> "
msgstr "<b>Vet lettertype.</b> "

#: ../src/html/helpwnd.cpp:1264
msgid "<i>Italic face.</i> "
msgstr "<i>Cursief lettertype.</i> "

#: ../src/richtext/richtextliststylepage.cpp:494
#: ../src/richtext/richtextbulletspage.cpp:286
msgid ">"
msgstr ">"

#: ../src/generic/dbgrptg.cpp:318
msgid "A debug report has been generated in the directory\n"
msgstr "Een foutopsporingsrapport is aangemaakt in de map\n"

#: ../src/common/debugrpt.cpp:573
msgid "A debug report has been generated. It can be found in"
msgstr "Er is een foutopsporingsrapport gemaakt. Het kan gevonden worden in"

#: ../src/common/xtixml.cpp:418
msgid "A non empty collection must consist of 'element' nodes"
msgstr "Een niet lege verzameling moet bestaan uit 'element'-knopen"

#: ../src/richtext/richtextliststylepage.cpp:304
#: ../src/richtext/richtextliststylepage.cpp:306
#: ../src/richtext/richtextbulletspage.cpp:244
#: ../src/richtext/richtextbulletspage.cpp:246
msgid "A standard bullet name."
msgstr "Een standaard opsommingstekennaam."

#: ../src/common/paper.cpp:217
msgid "A0 sheet, 841 x 1189 mm"
msgstr "A0, 841 x 1189 mm"

#: ../src/common/paper.cpp:218
msgid "A1 sheet, 594 x 841 mm"
msgstr "A1, 594 x 841 mm"

#: ../src/common/paper.cpp:159
msgid "A2 420 x 594 mm"
msgstr "A2 420 x 594 mm"

#: ../src/common/paper.cpp:156
msgid "A3 Extra 322 x 445 mm"
msgstr "A3 Extra 322 x 445 mm"

#: ../src/common/paper.cpp:161
msgid "A3 Extra Transverse 322 x 445 mm"
msgstr "A3 Extra Transverse 322 x 445 mm"

#: ../src/common/paper.cpp:170
msgid "A3 Rotated 420 x 297 mm"
msgstr "A3 gedraaid 420 x 297 mm"

#: ../src/common/paper.cpp:160
msgid "A3 Transverse 297 x 420 mm"
msgstr "A3 Transverse 297 x 420 mm"

#: ../src/common/paper.cpp:106
msgid "A3 sheet, 297 x 420 mm"
msgstr "A3, 297 x 420 mm"

#: ../src/common/paper.cpp:146
msgid "A4 Extra 9.27 x 12.69 in"
msgstr "A4 Extra 9.27 x 12.69 inch"

#: ../src/common/paper.cpp:153
msgid "A4 Plus 210 x 330 mm"
msgstr "A4 Plus 210 x 330 mm"

#: ../src/common/paper.cpp:171
msgid "A4 Rotated 297 x 210 mm"
msgstr "A4 gedraaid 297 x 210 mm"

#: ../src/common/paper.cpp:148
msgid "A4 Transverse 210 x 297 mm"
msgstr "A4 Transverse 210 x 297 mm"

#: ../src/common/paper.cpp:97
msgid "A4 sheet, 210 x 297 mm"
msgstr "A4, 210 x 297 mm"

#: ../src/common/paper.cpp:107
msgid "A4 small sheet, 210 x 297 mm"
msgstr "A4 klein, 210 x 297 mm"

#: ../src/common/paper.cpp:157
msgid "A5 Extra 174 x 235 mm"
msgstr "A5 Extra 174 x 235 mm"

#: ../src/common/paper.cpp:172
msgid "A5 Rotated 210 x 148 mm"
msgstr "A5 gedraaid 210 x 148 mm"

#: ../src/common/paper.cpp:154
msgid "A5 Transverse 148 x 210 mm"
msgstr "A5 Transverse 148 x 210 mm"

#: ../src/common/paper.cpp:108
msgid "A5 sheet, 148 x 210 mm"
msgstr "A5, 148 x 210 mm"

#: ../src/common/paper.cpp:164
msgid "A6 105 x 148 mm"
msgstr "A6 105 x 148 mm"

#: ../src/common/paper.cpp:177
msgid "A6 Rotated 148 x 105 mm"
msgstr "A6 gedraaid 148 x 105 mm"

#: ../src/generic/fontdlgg.cpp:83 ../src/richtext/richtextformatdlg.cpp:529
#: ../src/osx/carbon/fontdlg.cpp:153
msgid "ABCDEFGabcdefg12345"
msgstr "ABCDEFGabcdefg12345"

#: ../src/richtext/richtextsymboldlg.cpp:458 ../src/common/ftp.cpp:403
msgid "ASCII"
msgstr "ASCII"

#: ../src/common/stockitem.cpp:139
msgid "About"
msgstr "Over"

#: ../src/osx/menu_osx.cpp:560
msgid "About..."
msgstr "Over..."

#: ../src/richtext/richtextsizepage.cpp:520
msgid "Absolute"
msgstr "Absoluut"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:873
msgid "ActiveBorder"
msgstr "ActiveBorder"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:874
msgid "ActiveCaption"
msgstr "ActiveCaption"

#: ../src/common/stockitem.cpp:207
msgid "Actual Size"
msgstr "Werkelijke grootte"

#: ../src/richtext/richtextbuffer.cpp:11455
msgid "Add Column"
msgstr "Kolom toevoegen"

#: ../src/richtext/richtextbuffer.cpp:11392
msgid "Add Row"
msgstr "Rij toevoegen"

#: ../src/html/helpwnd.cpp:432
msgid "Add current page to bookmarks"
msgstr "Voeg huidige pagina toe aan favorieten"

#: ../src/generic/colrdlgg.cpp:366
msgid "Add to custom colours"
msgstr "Voeg toe aan aangepaste kleuren"

#: ../include/wx/xtiprop.h:255
msgid "AddToPropertyCollection called on a generic accessor"
msgstr "AddToPropertyCollection riep een generieke 'accessor' aan"

#: ../include/wx/xtiprop.h:193
msgid "AddToPropertyCollection called w/o valid adder"
msgstr "AddToPropertyCollection deed een aanroep zonder geldige 'adder'"

#: ../src/html/helpctrl.cpp:159
#, c-format
msgid "Adding book %s"
msgstr "Bezig met toevoegen van boek %s"

#: ../src/richtext/richtextliststylepage.cpp:435
msgid "After a paragraph:"
msgstr "Na een alinea:"

#: ../src/common/stockitem.cpp:172
msgid "Align Left"
msgstr "Links uitlijnen"

#: ../src/common/stockitem.cpp:173
msgid "Align Right"
msgstr "Rechts uitlijnen"

#: ../src/generic/filectrlg.cpp:1197 ../src/common/fldlgcmn.cpp:107
#, c-format
msgid "All files (%s)|%s"
msgstr "Alle bestanden (%s)|%s"

#: ../include/wx/defs.h:2886
msgid "All files (*)|*"
msgstr "Alle bestanden (*)|*"

#: ../include/wx/defs.h:2883
msgid "All files (*.*)|*.*"
msgstr "Alle bestanden (*.*)|*.*"

#: ../src/richtext/richtextstyles.cpp:1061
msgid "All styles"
msgstr "Alle stijlen"

#: ../src/propgrid/manager.cpp:1528
msgid "Alphabetic Mode"
msgstr "Alfabetische modus"

#: ../src/common/xtistrm.cpp:425
msgid "Already Registered Object passed to SetObjectClassInfo"
msgstr "Al geregistreerd object doorgegeven aan SetObjectClassInfo"

#: ../src/unix/dialup.cpp:353
msgid "Already dialling ISP."
msgstr "Al bezig internetaanbieder te bellen."

#: ../src/common/accelcmn.cpp:331 ../src/univ/themes/win32.cpp:3756
msgid "Alt+"
msgstr "Alt+"

#: ../src/richtext/richtextborderspage.cpp:577
#: ../src/richtext/richtextborderspage.cpp:579
msgid "An optional corner radius for adding rounded corners."
msgstr "Een optionele hoek-straal om afgeronde hoeken toe te voegen"

#: ../src/common/debugrpt.cpp:576
msgid "And includes the following files:\n"
msgstr "En omvat de volgende bestanden:\n"

#: ../src/generic/animateg.cpp:162
#, c-format
msgid "Animation file is not of type %ld."
msgstr "Animatiebestand is niet van type %ld."

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:872
msgid "AppWorkspace"
msgstr "AppWorkspace"

#: ../src/generic/logg.cpp:1014
#, c-format
msgid "Append log to file '%s' (choosing [No] will overwrite it)?"
msgstr "Voeg log toe aan bestand '%s' (kies [Nee] om te overschrijven)?"

#: ../src/osx/menu_osx.cpp:577 ../src/osx/menu_osx.cpp:585
msgid "Application"
msgstr "Applicatie"

#: ../src/propgrid/advprops.cpp:1609
msgid "Aqua"
msgstr "Agua"

#: ../src/richtext/richtextliststylepage.cpp:482
#: ../src/richtext/richtextbulletspage.cpp:274
msgid "Arabic"
msgstr "Arabisch"

#: ../src/common/fmapbase.cpp:153
msgid "Arabic (ISO-8859-6)"
msgstr "Arabisch (ISO-8859-6)"

#: ../src/msw/ole/automtn.cpp:672
#, c-format
msgid "Argument %u not found."
msgstr "Argument %u niet gevonden."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1753
msgid "Arrow"
msgstr "Pijl"

#: ../src/generic/aboutdlgg.cpp:184
msgid "Artists"
msgstr "Kunstenaars"

#: ../src/common/stockitem.cpp:195
msgid "Ascending"
msgstr "Oplopend"

#: ../src/generic/filectrlg.cpp:433
msgid "Attributes"
msgstr "Attributen"

#: ../src/richtext/richtextliststylepage.cpp:294
#: ../src/richtext/richtextbulletspage.cpp:232
#: ../src/richtext/richtextbulletspage.cpp:234
msgid "Available fonts."
msgstr "Beschikbare lettertypen."

#: ../src/common/paper.cpp:137
msgid "B4 (ISO) 250 x 353 mm"
msgstr "B4 (ISO) 250 x 353 mm"

#: ../src/common/paper.cpp:173
msgid "B4 (JIS) Rotated 364 x 257 mm"
msgstr "B4 (JIS) gedraaid 364 x 257 mm"

#: ../src/common/paper.cpp:127
msgid "B4 Envelope, 250 x 353 mm"
msgstr "Envelop B4, 250 x 353 mm"

#: ../src/common/paper.cpp:109
msgid "B4 sheet, 250 x 354 mm"
msgstr "B4, 250 x 354 mm"

#: ../src/common/paper.cpp:158
msgid "B5 (ISO) Extra 201 x 276 mm"
msgstr "B5 (ISO) Extra 201 x 276 mm"

#: ../src/common/paper.cpp:174
msgid "B5 (JIS) Rotated 257 x 182 mm"
msgstr "B5 (JIS) gedraaid 257 x 182 mm"

#: ../src/common/paper.cpp:155
msgid "B5 (JIS) Transverse 182 x 257 mm"
msgstr "B5 (JIS) Transverse 182 x 257 mm"

#: ../src/common/paper.cpp:128
msgid "B5 Envelope, 176 x 250 mm"
msgstr "Envelop B5, 176 x 250 mm"

#: ../src/common/paper.cpp:110
msgid "B5 sheet, 182 x 257 millimeter"
msgstr "B5, 182, 257 mm"

#: ../src/common/paper.cpp:182
msgid "B6 (JIS) 128 x 182 mm"
msgstr "B6 (JIS) 128 x 182 mm"

#: ../src/common/paper.cpp:183
msgid "B6 (JIS) Rotated 182 x 128 mm"
msgstr "B6 (JIS) gedraaid 182 x 128 mm"

#: ../src/common/paper.cpp:129
msgid "B6 Envelope, 176 x 125 mm"
msgstr "Envelop B6, 176 x 125 mm"

#: ../src/common/imagbmp.cpp:531 ../src/common/imagbmp.cpp:561
#: ../src/common/imagbmp.cpp:576
msgid "BMP: Couldn't allocate memory."
msgstr "BMP: kon geen geheugen reserveren."

#: ../src/common/imagbmp.cpp:100
msgid "BMP: Couldn't save invalid image."
msgstr "BMP: kon ongeldige afbeelding niet opslaan"

#: ../src/common/imagbmp.cpp:356
msgid "BMP: Couldn't write RGB color map."
msgstr "BMP: Kon RGB kleur map niet schrijven."

#: ../src/common/imagbmp.cpp:490
msgid "BMP: Couldn't write data."
msgstr "BMP: kon gegevens niet wegschrijven"

#: ../src/common/imagbmp.cpp:246
msgid "BMP: Couldn't write the file (Bitmap) header."
msgstr "BMP: Kon header van bestand (Bitmap) niet schrijven"

#: ../src/common/imagbmp.cpp:269
msgid "BMP: Couldn't write the file (BitmapInfo) header."
msgstr "BMP: kon de bestandsheader niet schrijven."

#: ../src/common/imagbmp.cpp:140
msgid "BMP: wxImage doesn't have own wxPalette."
msgstr "BMP: wxImage heeft geen eigen wxPalette."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:142 ../src/common/accelcmn.cpp:52
msgid "Back"
msgstr "Terug"

#: ../src/richtext/richtextbackgroundpage.cpp:148
#: ../src/richtext/richtextformatdlg.cpp:384
msgid "Background"
msgstr "Achtergrond"

#: ../src/richtext/richtextbackgroundpage.cpp:160
msgid "Background &colour:"
msgstr "Achtergrond&kleur:"

#: ../src/osx/carbon/fontdlg.cpp:220
msgid "Background colour"
msgstr "Achtergrondkleur"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:52
msgid "Backspace"
msgstr "Backspace"

#: ../src/common/fmapbase.cpp:160
msgid "Baltic (ISO-8859-13)"
msgstr "Baltisch (ISO-8859-13)"

#: ../src/common/fmapbase.cpp:151
msgid "Baltic (old) (ISO-8859-4)"
msgstr "Baltisch (oud) (ISO-8859-4)"

#: ../src/richtext/richtextliststylepage.cpp:426
msgid "Before a paragraph:"
msgstr "Vóór een alinea:"

#: ../src/richtext/richtextliststylepage.cpp:489
#: ../src/richtext/richtextbulletspage.cpp:281
msgid "Bitmap"
msgstr "Bitmap"

#: ../src/propgrid/advprops.cpp:1594
msgid "Black"
msgstr "Zwart"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1755
msgid "Blank"
msgstr "Blanco"

#: ../src/propgrid/advprops.cpp:1603
msgid "Blue"
msgstr "Blauw"

#: ../src/generic/colrdlgg.cpp:345
#, fuzzy
msgid "Blue:"
msgstr "Blauw"

#: ../src/generic/fontdlgg.cpp:333 ../src/richtext/richtextfontpage.cpp:355
#: ../src/osx/carbon/fontdlg.cpp:354 ../src/common/stockitem.cpp:143
msgid "Bold"
msgstr "Vet"

#: ../src/richtext/richtextborderspage.cpp:230
#: ../src/richtext/richtextborderspage.cpp:388
msgid "Border"
msgstr "Rand"

#: ../src/richtext/richtextformatdlg.cpp:379
msgid "Borders"
msgstr "Randen"

#: ../src/generic/prntdlgg.cpp:893
msgid "Bottom margin (mm):"
msgstr "Ondermarge (mm):"

#: ../src/richtext/richtextbuffer.cpp:9383
msgid "Box Properties"
msgstr "Vak Eigenschappen"

#: ../src/richtext/richtextstyles.cpp:1065
msgid "Box styles"
msgstr "Vak stijlen"

#: ../src/propgrid/advprops.cpp:1602
msgid "Brown"
msgstr "Bruin"

#: ../src/richtext/richtextliststylepage.cpp:245
#: ../src/richtext/richtextbulletspage.cpp:182
msgid "Bullet &Alignment:"
msgstr "Opsommings&teken-uitlijning:"

#: ../src/richtext/richtextliststylepage.cpp:309
msgid "Bullet style"
msgstr "Opsommingsteken-stijl"

#: ../src/richtext/richtextformatdlg.cpp:359
msgid "Bullets"
msgstr "Opsommingtekens"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1756
msgid "Bullseye"
msgstr "Roos"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:875
msgid "ButtonFace"
msgstr "ButtonFace"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:876
msgid "ButtonHighlight"
msgstr "ButtonHighlight"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:877
msgid "ButtonShadow"
msgstr "ButtonShadow"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:878
msgid "ButtonText"
msgstr "ButtonText"

#: ../src/common/paper.cpp:98
msgid "C sheet, 17 x 22 in"
msgstr "C, 17 x 22 inch"

#: ../src/generic/logg.cpp:514
msgid "C&lear"
msgstr "&Wissen"

#: ../src/generic/fontdlgg.cpp:406
msgid "C&olour:"
msgstr "&Kleur:"

#: ../src/common/paper.cpp:123
msgid "C3 Envelope, 324 x 458 mm"
msgstr "Envelop C3, 324 x 458 mm"

#: ../src/common/paper.cpp:124
msgid "C4 Envelope, 229 x 324 mm"
msgstr "Envelop C4, 229 x 324 mm"

#: ../src/common/paper.cpp:122
msgid "C5 Envelope, 162 x 229 mm"
msgstr "Envelop C5, 162 x 229 mm"

#: ../src/common/paper.cpp:125
msgid "C6 Envelope, 114 x 162 mm"
msgstr "Envelop C6, 114 x 162 mm"

#: ../src/common/paper.cpp:126
msgid "C65 Envelope, 114 x 229 mm"
msgstr "Envelop C65, 114 x 229 mm"

#: ../src/common/stockitem.cpp:146
msgid "CD-Rom"
msgstr "CD-Rom"

#: ../src/html/chm.cpp:815 ../src/html/chm.cpp:874
msgid "CHM handler currently supports only local files!"
msgstr "CHM-afhandeling ondersteunt momenteel alleen lokale bestanden!"

#: ../src/richtext/richtextfontpage.cpp:282
msgid "Ca&pitals"
msgstr "&Hoofdletters"

#: ../src/common/cmdproc.cpp:267
msgid "Can't &Undo "
msgstr "Kan niet &ongedaan maken: "

#: ../src/common/image.cpp:2824
msgid "Can't automatically determine the image format for non-seekable input."
msgstr ""
"Kan niet automatisch het afbeeldingsformaat bepalen voor niet vindbare input."

#: ../src/msw/registry.cpp:506
#, c-format
msgid "Can't close registry key '%s'"
msgstr "Kan registersleutel '%s' niet sluiten"

#: ../src/msw/registry.cpp:584
#, c-format
msgid "Can't copy values of unsupported type %d."
msgstr "Kan geen waarden kopiëren van niet ondersteund type %d"

#: ../src/msw/registry.cpp:487
#, c-format
msgid "Can't create registry key '%s'"
msgstr "Kan registersleutel '%s' niet maken"

#: ../src/msw/thread.cpp:665
msgid "Can't create thread"
msgstr "Kan thread niet maken"

#: ../src/msw/window.cpp:3691
#, c-format
msgid "Can't create window of class %s"
msgstr "Kan venster van klasse '%s' niet maken"

#: ../src/msw/registry.cpp:777
#, c-format
msgid "Can't delete key '%s'"
msgstr "Kan sleutel '%s' niet verwijderen"

#: ../src/msw/iniconf.cpp:458
#, c-format
msgid "Can't delete the INI file '%s'"
msgstr "Kan INI-bestand '%s' niet verwijderen"

#: ../src/msw/registry.cpp:805
#, c-format
msgid "Can't delete value '%s' from key '%s'"
msgstr "Kan waarde '%s' niet verwijderen uit sleutel '%s'"

#: ../src/msw/registry.cpp:1171
#, c-format
msgid "Can't enumerate subkeys of key '%s'"
msgstr "Kan subsleutels van sleutel '%s' niet opsommen"

#: ../src/msw/registry.cpp:1132
#, c-format
msgid "Can't enumerate values of key '%s'"
msgstr "Kan waarden van sleutel '%s' niet opsommen"

#: ../src/msw/registry.cpp:1389
#, c-format
msgid "Can't export value of unsupported type %d."
msgstr "Kan geen waarden exporteren van niet ondersteund type %d"

#: ../src/common/ffile.cpp:254
#, c-format
msgid "Can't find current position in file '%s'"
msgstr "Kan huidige positie in bestand '%s' niet vinden"

#: ../src/msw/registry.cpp:418
#, c-format
msgid "Can't get info about registry key '%s'"
msgstr "Kan geen informatie krijgen over registersleutel '%s'"

#: ../src/common/zstream.cpp:346
msgid "Can't initialize zlib deflate stream."
msgstr "Kan zlib deflate stream niet initialiseren."

#: ../src/common/zstream.cpp:185
msgid "Can't initialize zlib inflate stream."
msgstr "Kan zlib inflate stream niet initialiseren."

#: ../src/msw/fswatcher.cpp:476
#, c-format
msgid "Can't monitor non-existent directory \"%s\" for changes."
msgstr "Kan niet bestaande map \"%s\" niet controleren op veranderingen."

#: ../src/msw/registry.cpp:454
#, c-format
msgid "Can't open registry key '%s'"
msgstr "Kan registersleutel '%s' niet openen"

#: ../src/common/zstream.cpp:252
#, c-format
msgid "Can't read from inflate stream: %s"
msgstr "kan niet lezen van inflate stream: %s"

#: ../src/common/zstream.cpp:244
msgid "Can't read inflate stream: unexpected EOF in underlying stream."
msgstr ""
"Kan stream niet uitpakken: onverwacht einde-van-bestand in onderliggende "
"stream."

#: ../src/msw/registry.cpp:1064
#, c-format
msgid "Can't read value of '%s'"
msgstr "Kan waarde van '%s' niet lezen"

#: ../src/msw/registry.cpp:878 ../src/msw/registry.cpp:910
#: ../src/msw/registry.cpp:975
#, c-format
msgid "Can't read value of key '%s'"
msgstr "Kan waarde van sleutel '%s' niet lezen"

#: ../src/common/image.cpp:2620
#, c-format
msgid "Can't save image to file '%s': unknown extension."
msgstr "Kan afbeelding niet opslaan naar bestand '%s': Onbekende extensie."

#: ../src/generic/logg.cpp:573 ../src/generic/logg.cpp:976
msgid "Can't save log contents to file."
msgstr "Kan log inhoud niet in bestand opslaan."

#: ../src/msw/thread.cpp:629
msgid "Can't set thread priority"
msgstr "Kan thread-prioriteit niet instellen"

#: ../src/msw/registry.cpp:896 ../src/msw/registry.cpp:938
#: ../src/msw/registry.cpp:1081
#, c-format
msgid "Can't set value of '%s'"
msgstr "Kan waarde van '%s' niet instellen"

#: ../src/unix/utilsunx.cpp:351
msgid "Can't write to child process's stdin"
msgstr "Kan niet schrijven naar child proces's stdin"

#: ../src/common/zstream.cpp:427
#, c-format
msgid "Can't write to deflate stream: %s"
msgstr "Kan niet schrijven naar deflate stream: %s"

#: ../src/common/filefn.cpp:1261
#, c-format
msgid "Cannot enumerate files '%s'"
msgstr "Kan bestanden in map '%s' niet opsommen"

#: ../src/msw/dir.cpp:263
#, c-format
msgid "Cannot enumerate files in directory '%s'"
msgstr "Kan bestanden in map '%s' niet opsommen"

#: ../src/msw/dialup.cpp:523
#, c-format
msgid "Cannot find active dialup connection: %s"
msgstr "Kan geen actieve inbelverbinding vinden: %s"

#: ../src/msw/dialup.cpp:827
msgid "Cannot find the location of address book file"
msgstr "Kan locatie van adresboek niet vinden"

#: ../src/msw/ole/automtn.cpp:562
#, c-format
msgid "Cannot get an active instance of \"%s\""
msgstr "Kan geen actief exemplaarset verkrijgen van \"%s\""

#: ../src/unix/threadpsx.cpp:1035
#, c-format
msgid "Cannot get priority range for scheduling policy %d."
msgstr "Kan prioriteitbereik niet verkrijgen voor planningstrategie %d."

#: ../src/unix/utilsunx.cpp:987
msgid "Cannot get the hostname"
msgstr "Kan hostnaam niet verkrijgen"

#: ../src/unix/utilsunx.cpp:1023
msgid "Cannot get the official hostname"
msgstr "Kan officiële hostnaam niet verkrijgen"

#: ../src/msw/dialup.cpp:928
msgid "Cannot hang up - no active dialup connection."
msgstr "Kan niet ophangen - geen actieve inbelverbinding"

#: ../include/wx/msw/ole/oleutils.h:51
msgid "Cannot initialize OLE"
msgstr "Kan OLE niet initialiseren"

#: ../src/common/socket.cpp:853
msgid "Cannot initialize sockets"
msgstr "Kan sockets niet initiëren"

#: ../src/msw/volume.cpp:619
#, c-format
msgid "Cannot load icon from '%s'."
msgstr "Kan pictogram niet laden van '%s'."

#: ../src/xrc/xmlres.cpp:360
#, c-format
msgid "Cannot load resources from '%s'."
msgstr "Kan bronnen niet laden uit '%s'."

#: ../src/xrc/xmlres.cpp:742
#, c-format
msgid "Cannot load resources from file '%s'."
msgstr "Kan bronnen niet laden uit bestand '%s'."

#: ../src/html/htmlfilt.cpp:137
#, c-format
msgid "Cannot open HTML document: %s"
msgstr "Kan HTML-document '%s' niet openen"

#: ../src/html/helpdata.cpp:667
#, c-format
msgid "Cannot open HTML help book: %s"
msgstr "Kan HTML-helpbestand '%s' niet openen"

#: ../src/html/helpdata.cpp:299
#, c-format
msgid "Cannot open contents file: %s"
msgstr "Kon inhoudsopgave-bestand niet openen: %s"

#: ../src/generic/dcpsg.cpp:1667
msgid "Cannot open file for PostScript printing!"
msgstr "Kan bestand voor PostScript-afdrukken niet openen!"

#: ../src/html/helpdata.cpp:313
#, c-format
msgid "Cannot open index file: %s"
msgstr "Kan index-bestand niet openen: %s"

#: ../src/xrc/xmlres.cpp:724
#, c-format
msgid "Cannot open resources file '%s'."
msgstr "Kan bronbestand '%s' niet openen."

#: ../src/html/helpwnd.cpp:1534
msgid "Cannot print empty page."
msgstr "Kan geen lege pagina afdrukken."

#: ../src/msw/volume.cpp:507
#, c-format
msgid "Cannot read typename from '%s'!"
msgstr "Kan typenaam van '%s' niet lezen!"

#: ../src/msw/thread.cpp:888
#, c-format
msgid "Cannot resume thread %lx"
msgstr "Kan thread %lx niet voortzetten"

#: ../src/unix/threadpsx.cpp:1016
msgid "Cannot retrieve thread scheduling policy."
msgstr "Kan thread-planningstrategie niet verkrijgen."

#: ../src/common/intl.cpp:558
#, c-format
msgid "Cannot set locale to language \"%s\"."
msgstr "Kan de lokale niet naar Taal \"%s\" omzetten."

#: ../src/unix/threadpsx.cpp:831 ../src/msw/thread.cpp:546
msgid "Cannot start thread: error writing TLS."
msgstr "Kan thread niet starten: fout bij schrijven TLS."

#: ../src/msw/thread.cpp:872
#, c-format
msgid "Cannot suspend thread %lx"
msgstr "Kan thread %lx niet tijdelijk buiten dienst stellen"

#: ../src/msw/thread.cpp:794
msgid "Cannot wait for thread termination"
msgstr "Kan niet wachten op thread-beëindiging"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:75
msgid "Capital"
msgstr "Hoofdletter"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:879
msgid "CaptionText"
msgstr "CaptionText"

#: ../src/html/helpwnd.cpp:533
msgid "Case sensitive"
msgstr "Hoofdlettergevoelig"

#: ../src/propgrid/manager.cpp:1509
msgid "Categorized Mode"
msgstr "Gecatogoriseerde modus"

#: ../src/richtext/richtextbuffer.cpp:9968
msgid "Cell Properties"
msgstr "Cel Eigenschappen"

#: ../src/common/fmapbase.cpp:161
msgid "Celtic (ISO-8859-14)"
msgstr "Celtic (ISO-8859-14)"

#: ../src/richtext/richtextindentspage.cpp:160
#: ../src/richtext/richtextliststylepage.cpp:349
msgid "Cen&tred"
msgstr "Gecen&treerd"

#: ../src/common/stockitem.cpp:170
msgid "Centered"
msgstr "Gecentreerd"

#: ../src/common/fmapbase.cpp:149
msgid "Central European (ISO-8859-2)"
msgstr "Centraal-Europees (ISO-8859-2)"

#: ../src/richtext/richtextliststylepage.cpp:250
#: ../src/richtext/richtextbulletspage.cpp:187
msgid "Centre"
msgstr "Centrum"

#: ../src/richtext/richtextindentspage.cpp:162
#: ../src/richtext/richtextindentspage.cpp:164
#: ../src/richtext/richtextliststylepage.cpp:351
#: ../src/richtext/richtextliststylepage.cpp:353
msgid "Centre text."
msgstr "Tekst Centreren."

#: ../src/richtext/richtextsizepage.cpp:287
msgid "Centred"
msgstr "Gecentreerd"

#: ../src/richtext/richtextliststylepage.cpp:280
#: ../src/richtext/richtextbulletspage.cpp:219
msgid "Ch&oose..."
msgstr "K&iezen..."

#: ../src/richtext/richtextbuffer.cpp:4354
msgid "Change List Style"
msgstr "Verander lijst Stijl"

#: ../src/richtext/richtextbuffer.cpp:3709
msgid "Change Object Style"
msgstr "Verander lijst Stijl"

#: ../src/richtext/richtextbuffer.cpp:3982
#: ../src/richtext/richtextbuffer.cpp:8129
msgid "Change Properties"
msgstr "Wijzig Eigenschappen"

#: ../src/richtext/richtextbuffer.cpp:3526
msgid "Change Style"
msgstr "Verander Stijl"

#: ../src/common/fileconf.cpp:341
#, c-format
msgid "Changes won't be saved to avoid overwriting the existing file \"%s\""
msgstr ""
"Wijzigingen worden niet opgeslagen om te vermijden dat het bestaande bestand "
"\"%s\" zal worden overschreven"

#: ../src/gtk/filepicker.cpp:190 ../src/gtk/filedlg.cpp:87
#, c-format
msgid "Changing current directory to \"%s\" failed"
msgstr "Het veranderen van de huidige directory naar \"%s\" is mislukt"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1757
msgid "Character"
msgstr "Letterteken"

#: ../src/richtext/richtextstyles.cpp:1063
msgid "Character styles"
msgstr "Letterteken Stijlen"

#: ../src/richtext/richtextliststylepage.cpp:224
#: ../src/richtext/richtextliststylepage.cpp:226
#: ../src/richtext/richtextbulletspage.cpp:161
#: ../src/richtext/richtextbulletspage.cpp:163
msgid "Check to add a period after the bullet."
msgstr "Klik om een punt toe te voegen na het opsommingsteken."

#: ../src/richtext/richtextliststylepage.cpp:238
#: ../src/richtext/richtextliststylepage.cpp:240
#: ../src/richtext/richtextbulletspage.cpp:175
#: ../src/richtext/richtextbulletspage.cpp:177
msgid "Check to add a right parenthesis."
msgstr "Klik om een rechterhaakje toe te voegen."

#: ../src/richtext/richtextborderspage.cpp:383
#: ../src/richtext/richtextborderspage.cpp:385
#: ../src/richtext/richtextborderspage.cpp:551
#: ../src/richtext/richtextborderspage.cpp:553
msgid "Check to edit all borders simultaneously."
msgstr "Aanvinken om alle hoeken tegelijk te bewerken."

#: ../src/richtext/richtextliststylepage.cpp:231
#: ../src/richtext/richtextliststylepage.cpp:233
#: ../src/richtext/richtextbulletspage.cpp:168
#: ../src/richtext/richtextbulletspage.cpp:170
msgid "Check to enclose the bullet in parentheses."
msgstr "Klik om het opsommingsteken tussen haakjes te zetten."

#: ../src/richtext/richtextfontpage.cpp:315
#: ../src/richtext/richtextfontpage.cpp:317
msgid "Check to indicate right-to-left text layout."
msgstr "Aanvinken om rechts-naar-links tekstlay-out aan te geven"

#: ../src/osx/carbon/fontdlg.cpp:356 ../src/osx/carbon/fontdlg.cpp:358
msgid "Check to make the font bold."
msgstr "Aanvinken voor Vet Lettertype"

#: ../src/osx/carbon/fontdlg.cpp:363 ../src/osx/carbon/fontdlg.cpp:365
msgid "Check to make the font italic."
msgstr "Aanvinken voor Cursief Lettertype."

#: ../src/osx/carbon/fontdlg.cpp:372 ../src/osx/carbon/fontdlg.cpp:374
msgid "Check to make the font underlined."
msgstr "Aanvinken voor Onderstreept Lettertype"

#: ../src/richtext/richtextstyledlg.cpp:289
#: ../src/richtext/richtextstyledlg.cpp:291
msgid "Check to restart numbering."
msgstr "Aanvinken voor herstart nummering."

#: ../src/richtext/richtextfontpage.cpp:277
#: ../src/richtext/richtextfontpage.cpp:279
msgid "Check to show a line through the text."
msgstr "Aanvinken voor doorgehaalde tekst."

#: ../src/richtext/richtextfontpage.cpp:284
#: ../src/richtext/richtextfontpage.cpp:286
msgid "Check to show the text in capitals."
msgstr "Aanvinken voor tekst in Hoofdletters."

#: ../src/richtext/richtextfontpage.cpp:291
#: ../src/richtext/richtextfontpage.cpp:293
msgid "Check to show the text in small capitals."
msgstr "Aanvinken voor tekst in klein kapitaal"

#: ../src/richtext/richtextfontpage.cpp:305
#: ../src/richtext/richtextfontpage.cpp:307
msgid "Check to show the text in subscript."
msgstr "Aanvinken voor tekst in onderschrift."

#: ../src/richtext/richtextfontpage.cpp:298
#: ../src/richtext/richtextfontpage.cpp:300
msgid "Check to show the text in superscript."
msgstr "Aanvinken voor tekst in bovenschrift."

#: ../src/richtext/richtextfontpage.cpp:322
#: ../src/richtext/richtextfontpage.cpp:324
msgid "Check to suppress hyphenation."
msgstr "Aanvinken om woordafbreking te onderdrukken."

#: ../src/msw/dialup.cpp:763
msgid "Choose ISP to dial"
msgstr "Kies internetaanbieder om te bellen"

#: ../src/propgrid/props.cpp:1922
msgid "Choose a directory:"
msgstr "Kies een map:"

#: ../src/propgrid/props.cpp:1975
msgid "Choose a file"
msgstr "Kies een bestand"

#: ../src/generic/colrdlgg.cpp:158 ../src/gtk/colordlg.cpp:54
msgid "Choose colour"
msgstr "Kies Kleur"

#: ../src/generic/fontpickerg.cpp:50 ../src/gtk/fontdlg.cpp:77
#: ../src/gtk1/fontdlg.cpp:125
msgid "Choose font"
msgstr "Kies lettertype"

#: ../src/common/module.cpp:74
#, c-format
msgid "Circular dependency involving module \"%s\" detected."
msgstr ""
"Circulaire afhankelijkheid met betrekking tot module ‘%s’ gedetecteerd."

#: ../src/aui/tabmdi.cpp:108 ../src/generic/mdig.cpp:97
msgid "Cl&ose"
msgstr "Sl&uiten"

#: ../src/msw/ole/automtn.cpp:684
msgid "Class not registered."
msgstr "Klasse niet geregistreerd."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:147 ../src/common/accelcmn.cpp:72
msgid "Clear"
msgstr "Wissen"

#: ../src/generic/logg.cpp:514
msgid "Clear the log contents"
msgstr "Wis de inhoud van het logbestand"

#: ../src/richtext/richtextstyledlg.cpp:252
#: ../src/richtext/richtextstyledlg.cpp:254
msgid "Click to apply the selected style."
msgstr "Klik voor toepassen geselecteerde stijl."

#: ../src/richtext/richtextliststylepage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:283
#: ../src/richtext/richtextbulletspage.cpp:220
#: ../src/richtext/richtextbulletspage.cpp:222
msgid "Click to browse for a symbol."
msgstr "Klik voor zoeken naar symbool."

#: ../src/osx/carbon/fontdlg.cpp:403 ../src/osx/carbon/fontdlg.cpp:405
msgid "Click to cancel changes to the font."
msgstr "Klik om lettertype veranderingen te annuleren."

#: ../src/generic/fontdlgg.cpp:472 ../src/generic/fontdlgg.cpp:491
msgid "Click to cancel the font selection."
msgstr "Klik voor het annuleren van lettertypekeuze."

#: ../src/osx/carbon/fontdlg.cpp:384 ../src/osx/carbon/fontdlg.cpp:386
msgid "Click to change the font colour."
msgstr "Klik voor het veranderen van lettertypekleur."

#: ../src/richtext/richtextfontpage.cpp:267
#: ../src/richtext/richtextfontpage.cpp:269
msgid "Click to change the text background colour."
msgstr "Klik voor het veranderen van tekst achtergrondkleur."

#: ../src/richtext/richtextfontpage.cpp:254
#: ../src/richtext/richtextfontpage.cpp:256
msgid "Click to change the text colour."
msgstr "Klik voor het veranderen van tekstkleur."

#: ../src/richtext/richtextliststylepage.cpp:195
#: ../src/richtext/richtextliststylepage.cpp:197
msgid "Click to choose the font for this level."
msgstr "Klik voor het kiezen van het lettertype voor dit niveau."

#: ../src/richtext/richtextstyledlg.cpp:279
#: ../src/richtext/richtextstyledlg.cpp:281
msgid "Click to close this window."
msgstr "Klik om dit venster te sluiten."

#: ../src/osx/carbon/fontdlg.cpp:410 ../src/osx/carbon/fontdlg.cpp:412
msgid "Click to confirm changes to the font."
msgstr "Klik voor bevestiging van lettertypeveranderingen."

#: ../src/generic/fontdlgg.cpp:477 ../src/generic/fontdlgg.cpp:479
#: ../src/generic/fontdlgg.cpp:484 ../src/generic/fontdlgg.cpp:486
msgid "Click to confirm the font selection."
msgstr "Klik voor bevestiging van lettertypeselectie."

#: ../src/richtext/richtextstyledlg.cpp:244
#: ../src/richtext/richtextstyledlg.cpp:246
msgid "Click to create a new box style."
msgstr "Klik voor het maken van een nieuwe vak stijl."

#: ../src/richtext/richtextstyledlg.cpp:226
#: ../src/richtext/richtextstyledlg.cpp:228
msgid "Click to create a new character style."
msgstr "Klik voor het maken van een nieuwe letterteken stijl."

#: ../src/richtext/richtextstyledlg.cpp:238
#: ../src/richtext/richtextstyledlg.cpp:240
msgid "Click to create a new list style."
msgstr "Klik voor het maken van een nieuwe lijst stijl."

#: ../src/richtext/richtextstyledlg.cpp:232
#: ../src/richtext/richtextstyledlg.cpp:234
msgid "Click to create a new paragraph style."
msgstr "Klik voor het maken van een nieuwe paragraaf stijl."

#: ../src/richtext/richtexttabspage.cpp:133
#: ../src/richtext/richtexttabspage.cpp:135
msgid "Click to create a new tab position."
msgstr "Klik voor het maken van een nieuwe tab positie."

#: ../src/richtext/richtexttabspage.cpp:145
#: ../src/richtext/richtexttabspage.cpp:147
msgid "Click to delete all tab positions."
msgstr "Klik om alle tabposities te verwijderen."

#: ../src/richtext/richtextstyledlg.cpp:270
#: ../src/richtext/richtextstyledlg.cpp:272
msgid "Click to delete the selected style."
msgstr "Klik voor het verwijderen van geselecteerde stijl."

#: ../src/richtext/richtexttabspage.cpp:139
#: ../src/richtext/richtexttabspage.cpp:141
msgid "Click to delete the selected tab position."
msgstr "Klik voor het verwijderen van geselecteerd tab positie."

#: ../src/richtext/richtextstyledlg.cpp:264
#: ../src/richtext/richtextstyledlg.cpp:266
msgid "Click to edit the selected style."
msgstr "Klik voor het bewerken van geselecteerde stijl."

#: ../src/richtext/richtextstyledlg.cpp:258
#: ../src/richtext/richtextstyledlg.cpp:260
msgid "Click to rename the selected style."
msgstr "Klik voor het hernoemen van geselecteerde stijl."

#: ../src/aui/tabmdi.cpp:109 ../src/generic/mdig.cpp:98
msgid "Close All"
msgstr "Alles Sluiten"

#: ../src/common/stockitem.cpp:266
msgid "Close current document"
msgstr "Sluit het huidige document."

#: ../src/generic/logg.cpp:516
msgid "Close this window"
msgstr "Sluit dit venster"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6006
msgid "Collapse"
msgstr ""

#: ../src/richtext/richtextformatdlg.cpp:776
msgid "Colour"
msgstr "Kleur"

#: ../src/msw/colordlg.cpp:158
#, c-format
msgid "Colour selection dialog failed with error %0lx."
msgstr "Kleurenselectie dialoog mislukt met fout %0lx."

#: ../src/osx/carbon/fontdlg.cpp:380
msgid "Colour:"
msgstr "Kleur:"

#: ../src/generic/datavgen.cpp:6077
#, fuzzy, c-format
msgid "Column %u"
msgstr "Kolom toevoegen"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:114
msgid "Command"
msgstr "Commando"

#: ../src/common/init.cpp:196
#, c-format
msgid ""
"Command line argument %d couldn't be converted to Unicode and will be "
"ignored."
msgstr ""
"Commandoregel argument %d kon niet omgezet worden naar Unicode en zal worden "
"genegeerd."

#: ../src/msw/fontdlg.cpp:120
#, c-format
msgid "Common dialog failed with error code %0lx."
msgstr "Common dialoog mislukt met fout %0lx."

#: ../src/gtk/window.cpp:4649
msgid ""
"Compositing not supported by this system, please enable it in your Window "
"Manager."
msgstr ""
"Samenstellen niet ondersteund door dit systeem. U kunt dit inschakelen in uw "
"Vensterbeheer."

#: ../src/html/helpwnd.cpp:1551
msgid "Compressed HTML Help file (*.chm)|*.chm|"
msgstr "Gecomprimeerd HTML-hulpbestand (*.chm)|*.chm|"

#: ../src/generic/dirctrlg.cpp:444
msgid "Computer"
msgstr "Computer"

#: ../src/common/fileconf.cpp:934
#, c-format
msgid "Config entry name cannot start with '%c'."
msgstr "Naam van configuratie-ingang kan niet beginnen met '%c'."

#: ../src/generic/filedlgg.cpp:349 ../src/gtk/filedlg.cpp:60
msgid "Confirm"
msgstr "Bevestig"

#: ../src/html/htmlwin.cpp:566
msgid "Connecting..."
msgstr "Bezig te verbinden..."

#: ../src/html/helpwnd.cpp:475
msgid "Contents"
msgstr "Inhoud"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:880
msgid "ControlDark"
msgstr "ControlDark"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:881
msgid "ControlLight"
msgstr "ControlLight"

#: ../src/common/strconv.cpp:2262
#, c-format
msgid "Conversion to charset '%s' doesn't work."
msgstr "Conversie naar karakterset '%s' werkt niet."

#: ../src/common/stockitem.cpp:149
msgid "Convert"
msgstr "Converteren"

#: ../src/html/htmlwin.cpp:1079
#, c-format
msgid "Copied to clipboard:\"%s\""
msgstr "Gekopieerd naar klembord:\"%s\""

#: ../src/generic/prntdlgg.cpp:247
msgid "Copies:"
msgstr "Kopieën:"

#: ../src/common/stockitem.cpp:258
msgid "Copy selection"
msgstr "Selectie kopiëren"

#: ../src/richtext/richtextborderspage.cpp:566
#: ../src/richtext/richtextborderspage.cpp:601
msgid "Corner"
msgstr "Hoek"

#: ../src/richtext/richtextborderspage.cpp:575
msgid "Corner &radius:"
msgstr "Hoek-st&raal:"

#: ../src/html/chm.cpp:718
#, c-format
msgid "Could not create temporary file '%s'"
msgstr "Kon tijdelijk bestand '%s' niet aanmaken"

#: ../src/html/chm.cpp:273
#, c-format
msgid "Could not extract %s into %s: %s"
msgstr "Kon %s niet extraheren in %s: %s"

#: ../src/generic/tabg.cpp:1048
msgid "Could not find tab for id"
msgstr "Kon tabblad niet vinden voor id"

#: ../src/gtk/notifmsg.cpp:108
#, fuzzy
msgid "Could not initalize libnotify."
msgstr "Kon uitlijning niet instellen."

#: ../src/html/chm.cpp:444
#, c-format
msgid "Could not locate file '%s'."
msgstr "Kan bestand  '%s' niet lokaliseren"

#: ../src/common/filefn.cpp:1403
msgid "Could not set current working directory"
msgstr "Instellen van huidige werk map mislukt"

#: ../src/common/prntbase.cpp:2015
msgid "Could not start document preview."
msgstr "Kon afdrukvoorbeeld niet starten."

#: ../src/generic/printps.cpp:178 ../src/msw/printwin.cpp:210
#: ../src/gtk/print.cpp:1132
msgid "Could not start printing."
msgstr "Kon printen niet starten."

#: ../src/common/wincmn.cpp:2125
msgid "Could not transfer data to window"
msgstr "Kon gegevens niet naar venster overdragen"

#: ../src/msw/imaglist.cpp:187 ../src/msw/imaglist.cpp:224
#: ../src/msw/imaglist.cpp:249 ../src/msw/dragimag.cpp:185
#: ../src/msw/dragimag.cpp:220
msgid "Couldn't add an image to the image list."
msgstr "Kon geen afbeelding aan de lijst toevoegen"

#: ../src/osx/glcanvas_osx.cpp:414 ../src/unix/glx11.cpp:558
#: ../src/msw/glcanvas.cpp:616
#, fuzzy
msgid "Couldn't create OpenGL context"
msgstr "Kon geen timer creëren"

#: ../src/msw/timer.cpp:134
msgid "Couldn't create a timer"
msgstr "Kon geen timer creëren"

#: ../src/osx/carbon/overlay.cpp:122
msgid "Couldn't create the overlay window"
msgstr "Kon geen overlay venster aanmaken"

#: ../src/common/translation.cpp:2024
msgid "Couldn't enumerate translations"
msgstr "Kon vertalingen niet opsommen"

#: ../src/common/dynlib.cpp:120
#, c-format
msgid "Couldn't find symbol '%s' in a dynamic library"
msgstr "Kon symbool %s niet vinden in een dynamische bibliotheek"

#: ../src/msw/thread.cpp:915
msgid "Couldn't get the current thread pointer"
msgstr "Kon pointer naar huidige thread niet verkrijgen"

#: ../src/osx/carbon/overlay.cpp:129
msgid "Couldn't init the context on the overlay window"
msgstr "Kon de context in het overlay venster niet initiëren"

#: ../src/common/imaggif.cpp:244
msgid "Couldn't initialize GIF hash table."
msgstr "Kon GIF hash-tabel niet initiëren."

#: ../src/common/imagpng.cpp:409
msgid "Couldn't load a PNG image - file is corrupted or not enough memory."
msgstr ""
"Kon PNG-afbeelding niet laden: bestand is corrupt of onvoldoende geheugen."

#: ../src/unix/sound.cpp:470
#, c-format
msgid "Couldn't load sound data from '%s'."
msgstr "Kon geen geluidsgegevens laden van '%s'."

#: ../src/msw/dirdlg.cpp:435
msgid "Couldn't obtain folder name"
msgstr "Kon de mapnaam niet verkrijgen"

#: ../src/unix/sound_sdl.cpp:229
#, c-format
msgid "Couldn't open audio: %s"
msgstr "Kon audio: %s niet openen"

#: ../src/msw/ole/dataobj.cpp:377
#, c-format
msgid "Couldn't register clipboard format '%s'."
msgstr "Kon klembord-formaat '%s' niet registreren."

#: ../src/msw/listctrl.cpp:869
#, c-format
msgid "Couldn't retrieve information about list control item %d."
msgstr "Kon geen informatie verkrijgen over lijst-control element %d."

#: ../src/common/imagpng.cpp:498 ../src/common/imagpng.cpp:509
#: ../src/common/imagpng.cpp:519
msgid "Couldn't save PNG image."
msgstr "Kon PNG afbeelding niet opslaan."

#: ../src/msw/thread.cpp:684
msgid "Couldn't terminate thread"
msgstr "Kon thread niet beëindigen"

#: ../src/common/xtistrm.cpp:166
#, c-format
msgid "Create Parameter %s not found in declared RTTI Parameters"
msgstr "Create Parameter %s niet gevonden in gedeclareerde RTTI Parameters"

#: ../src/generic/dirdlgg.cpp:288
msgid "Create directory"
msgstr "Maak map"

#: ../src/generic/filedlgg.cpp:212 ../src/generic/dirdlgg.cpp:111
msgid "Create new directory"
msgstr "Maak nieuwe map"

#: ../src/xrc/xmlres.cpp:2460
#, c-format
msgid "Creating %s \"%s\" failed."
msgstr "Aanmaken van '%s' in '%s' mislukte."

#: ../src/common/accelcmn.cpp:333
msgid "Ctrl+"
msgstr "Ctrl+"

#: ../src/richtext/richtextctrl.cpp:332 ../src/osx/textctrl_osx.cpp:576
#: ../src/common/stockitem.cpp:151 ../src/msw/textctrl.cpp:2507
msgid "Cu&t"
msgstr "Kni&ppen"

#: ../src/generic/filectrlg.cpp:940
msgid "Current directory:"
msgstr "Huidige map:"

#: ../src/gtk/print.cpp:217
msgid "Custom size"
msgstr "Aangepaste grootte"

#: ../src/common/headerctrlcmn.cpp:60
msgid "Customize Columns"
msgstr "Kolommen aanpassen"

#: ../src/common/stockitem.cpp:259
msgid "Cut selection"
msgstr "Selectie knippen"

#: ../src/common/fmapbase.cpp:152
msgid "Cyrillic (ISO-8859-5)"
msgstr "Cyrillic (ISO-8859-5)"

#: ../src/common/paper.cpp:99
msgid "D sheet, 22 x 34 in"
msgstr "D, 22 x34 inch"

#: ../src/msw/dde.cpp:703
msgid "DDE poke request failed"
msgstr "DDE poke verzoek mislukt"

#: ../src/common/imagbmp.cpp:1169
msgid "DIB Header: Encoding doesn't match bitdepth."
msgstr "DIB Header: Codering komt niet overeen met bit-diepte."

#: ../src/common/imagbmp.cpp:1074
msgid "DIB Header: Image height > 32767 pixels for file."
msgstr "DIB Header: Afbeeldingshoogte > 32767 pixels in bestand."

#: ../src/common/imagbmp.cpp:1066
msgid "DIB Header: Image width > 32767 pixels for file."
msgstr "DIB Header: Afbeeldingsbreedte > 32767 pixels in bestand."

#: ../src/common/imagbmp.cpp:1094
msgid "DIB Header: Unknown bitdepth in file."
msgstr "DIB Header: Onbekende bitdiepte in bestand."

#: ../src/common/imagbmp.cpp:1149
msgid "DIB Header: Unknown encoding in file."
msgstr "DIB Header: Onbekende codering in bestand."

#: ../src/common/paper.cpp:121
msgid "DL Envelope, 110 x 220 mm"
msgstr "Envelop DL, 110 x 220 mm"

#: ../src/richtext/richtextborderspage.cpp:613
msgid "Dashed"
msgstr "Gestreept"

#: ../src/generic/dbgrptg.cpp:300
#, c-format
msgid "Debug report \"%s\""
msgstr "foutopsporingsrapport \"%s\""

#: ../src/common/debugrpt.cpp:210
msgid "Debug report couldn't be created."
msgstr "foutopsporingsrapport kon niet worden gemaakt"

#: ../src/common/debugrpt.cpp:553
msgid "Debug report generation has failed."
msgstr "Genereren van foutopsporingsrapport mislukt."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:84
msgid "Decimal"
msgstr "Decimaal"

#: ../src/generic/fontdlgg.cpp:323
msgid "Decorative"
msgstr "Decoratief"

#: ../src/common/fmapbase.cpp:796
msgid "Default encoding"
msgstr "Standaardcodering"

#: ../src/generic/prntdlgg.cpp:510
msgid "Default printer"
msgstr "Standaardprinter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:51
msgid "Del"
msgstr "Del"

#: ../src/richtext/richtexttabspage.cpp:144
msgid "Delete A&ll"
msgstr "A&lles verwijderen"

#: ../src/richtext/richtextbuffer.cpp:11341
msgid "Delete Column"
msgstr "Kolom verwijderen"

#: ../src/richtext/richtextbuffer.cpp:11291
msgid "Delete Row"
msgstr "Rij verwijderen"

#: ../src/richtext/richtextstyledlg.cpp:782
msgid "Delete Style"
msgstr "&Stijl verwijderen..."

#: ../src/richtext/richtextctrl.cpp:1345 ../src/richtext/richtextctrl.cpp:1584
msgid "Delete Text"
msgstr "Tekst verwijderen"

#: ../src/generic/editlbox.cpp:170
msgid "Delete item"
msgstr "element verwijderen"

#: ../src/common/stockitem.cpp:260
msgid "Delete selection"
msgstr "Selectie verwijderen"

#: ../src/richtext/richtextstyledlg.cpp:782
#, c-format
msgid "Delete style %s?"
msgstr "Stijl %s verwijderen?"

#: ../src/unix/snglinst.cpp:301
#, c-format
msgid "Deleted stale lock file '%s'."
msgstr "Verouderd vergrendeld bestand '%s' verwijderd."

#: ../src/common/secretstore.cpp:220
#, fuzzy, c-format
msgid "Deleting password for \"%s/%s\" failed: %s."
msgstr "Aanmaken van '%s' in '%s' mislukte."

#: ../src/common/module.cpp:124
#, c-format
msgid "Dependency \"%s\" of module \"%s\" doesn't exist."
msgstr "Afhankelijkheid \"%s\" van module \"%s\" bestaat niet."

#: ../src/common/stockitem.cpp:196
msgid "Descending"
msgstr "Aflopend"

#. TRANSLATORS: Keyword of system colour
#: ../src/generic/dirctrlg.cpp:526 ../src/propgrid/advprops.cpp:882
msgid "Desktop"
msgstr "Bureaublad"

#: ../src/generic/aboutdlgg.cpp:70
msgid "Developed by "
msgstr "Ontwikkeld door"

#: ../src/generic/aboutdlgg.cpp:176
msgid "Developers"
msgstr "Ontwikkelaars"

#: ../src/msw/dialup.cpp:374
msgid ""
"Dial up functions are unavailable because the remote access service (RAS) is "
"not installed on this machine. Please install it."
msgstr ""
"Inbelfuncties zijn niet beschikbaar omdat de inbelverbindingsoftware (RAS) "
"niet op deze machine is geïnstalleerd. Installeer het a.u.b."

#: ../src/generic/tipdlg.cpp:211
msgid "Did you know..."
msgstr "Wist u dat..."

#: ../src/dfb/wrapdfb.cpp:63
#, c-format
msgid "DirectFB error %d occurred."
msgstr "DirectFB fout %d opgetreden."

#: ../src/motif/filedlg.cpp:219
msgid "Directories"
msgstr "Mappen"

#: ../src/common/filefn.cpp:1183
#, c-format
msgid "Directory '%s' couldn't be created"
msgstr "Map '%s' kon niet worden gemaakt"

#: ../src/common/filefn.cpp:1197
#, c-format
msgid "Directory '%s' couldn't be deleted"
msgstr "Map '%s' kon niet worden verwijderd"

#: ../src/generic/dirdlgg.cpp:204
msgid "Directory does not exist"
msgstr "Map bestaat niet"

#: ../src/generic/filectrlg.cpp:1399
msgid "Directory doesn't exist."
msgstr "Map bestaat niet."

#: ../src/common/docview.cpp:457
msgid "Discard changes and reload the last saved version?"
msgstr "Wijzigingen negeren en laatst opgeslagen versie herladen? "

#: ../src/html/helpwnd.cpp:502
msgid ""
"Display all index items that contain given substring. Search is case "
"insensitive."
msgstr ""
"Toon alle index elementen die de gegeven subtekenreeks bevatten. Niet "
"hoofdlettergevoelig."

#: ../src/html/helpwnd.cpp:679
msgid "Display options dialog"
msgstr "Toon optie-dialoog"

#: ../src/html/helpwnd.cpp:322
msgid "Displays help as you browse the books on the left."
msgstr "Toont hulptekst terwijl u de boeken aan de linkerzijde doorbladert."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:85
msgid "Divide"
msgstr "Scheiding"

#: ../src/common/docview.cpp:533
#, c-format
msgid "Do you want to save changes to %s?"
msgstr "Wilt u de veranderingen aan %s opslaan?"

#: ../src/common/prntbase.cpp:542
msgid "Document:"
msgstr "Document:"

#: ../src/generic/aboutdlgg.cpp:73
msgid "Documentation by "
msgstr "Documentatie door"

#: ../src/generic/aboutdlgg.cpp:180
msgid "Documentation writers"
msgstr "Documentatie schrijvers"

#: ../src/common/sizer.cpp:2799
msgid "Don't Save"
msgstr "Niet Opslaan"

#: ../src/html/htmlwin.cpp:633
msgid "Done"
msgstr "Klaar"

#: ../src/generic/progdlgg.cpp:448 ../src/msw/progdlg.cpp:407
msgid "Done."
msgstr "Klaar."

#: ../src/richtext/richtextborderspage.cpp:612
msgid "Dotted"
msgstr "Gestippeld"

#: ../src/richtext/richtextborderspage.cpp:614
msgid "Double"
msgstr "Dubbel"

#: ../src/common/paper.cpp:176
msgid "Double Japanese Postcard Rotated 148 x 200 mm"
msgstr "Dubbele Japanse briefkaart gedraaid 148 x 200 mm"

#: ../src/common/xtixml.cpp:273
#, c-format
msgid "Doubly used id : %d"
msgstr "Dubbel gebruikt ID: %d"

#. TRANSLATORS: Name of keyboard key
#: ../src/generic/fdrepdlg.cpp:152 ../src/common/stockitem.cpp:153
#: ../src/common/accelcmn.cpp:64
msgid "Down"
msgstr "Omlaag"

#: ../src/common/paper.cpp:100
msgid "E sheet, 34 x 44 in"
msgstr "E, 34 x 44 inch"

#: ../src/unix/fswatcher_inotify.cpp:561
msgid "EOF while reading from inotify descriptor"
msgstr "EOF tijdens lezen van inotify descriptor"

#: ../src/generic/editlbox.cpp:168
msgid "Edit item"
msgstr "element bewerken"

#: ../include/wx/generic/progdlgg.h:84
msgid "Elapsed time:"
msgstr "Verstreken tijd:"

#: ../src/richtext/richtextsizepage.cpp:353
#: ../src/richtext/richtextsizepage.cpp:355
#: ../src/richtext/richtextsizepage.cpp:465
#: ../src/richtext/richtextsizepage.cpp:467
msgid "Enable the height value."
msgstr "De hoogte-waarde inschakelen. "

#: ../src/richtext/richtextsizepage.cpp:438
#: ../src/richtext/richtextsizepage.cpp:440
msgid "Enable the maximum width value."
msgstr "Maximum breedte inschakelen."

#: ../src/richtext/richtextsizepage.cpp:411
#: ../src/richtext/richtextsizepage.cpp:413
msgid "Enable the minimum height value."
msgstr "De minimale hoogte-waarde inschakelen."

#: ../src/richtext/richtextsizepage.cpp:384
#: ../src/richtext/richtextsizepage.cpp:386
msgid "Enable the minimum width value."
msgstr "Minimum breedte inschakelen."

#: ../src/richtext/richtextsizepage.cpp:319
#: ../src/richtext/richtextsizepage.cpp:321
msgid "Enable the width value."
msgstr "De breedte-waarde inschakelen."

#: ../src/richtext/richtextsizepage.cpp:280
#: ../src/richtext/richtextsizepage.cpp:282
msgid "Enable vertical alignment."
msgstr "Vertikale uitlijning inschakelen."

#: ../src/richtext/richtextbackgroundpage.cpp:162
#: ../src/richtext/richtextbackgroundpage.cpp:164
msgid "Enables a background colour."
msgstr "Achtergrondkleur inschakelen."

#: ../src/richtext/richtextbackgroundpage.cpp:196
#: ../src/richtext/richtextbackgroundpage.cpp:198
msgid "Enables a shadow."
msgstr "Schakelt een schaduw in."

#: ../src/richtext/richtextbackgroundpage.cpp:300
#: ../src/richtext/richtextbackgroundpage.cpp:302
msgid "Enables the blur distance."
msgstr "Schakelt de vervagingsafstand in."

#: ../src/richtext/richtextbackgroundpage.cpp:260
#: ../src/richtext/richtextbackgroundpage.cpp:262
msgid "Enables the shadow colour."
msgstr "Schakelt de schaduwkleur in."

#: ../src/richtext/richtextbackgroundpage.cpp:327
#: ../src/richtext/richtextbackgroundpage.cpp:329
msgid "Enables the shadow opacity."
msgstr "Schakelt de schaduwondoorzichtigheid in."

#: ../src/richtext/richtextbackgroundpage.cpp:273
#: ../src/richtext/richtextbackgroundpage.cpp:275
msgid "Enables the shadow spread."
msgstr "Schakelt de schaduwbreedte in."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:66
msgid "End"
msgstr "End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:55
msgid "Enter"
msgstr "Enter"

#: ../src/richtext/richtextstyledlg.cpp:934
msgid "Enter a box style name"
msgstr "Vul een vak stijlnaam in"

#: ../src/richtext/richtextstyledlg.cpp:606
msgid "Enter a character style name"
msgstr "Vul een lettertekenstijlnaam in"

#: ../src/richtext/richtextstyledlg.cpp:820
msgid "Enter a list style name"
msgstr "Vul een lijststijl in"

#: ../src/richtext/richtextstyledlg.cpp:893
msgid "Enter a new style name"
msgstr "Vul een nieuwe stijlnaam in"

#: ../src/richtext/richtextstyledlg.cpp:654
msgid "Enter a paragraph style name"
msgstr "Vul een paragraafstijl in"

#: ../src/generic/dbgrptg.cpp:174
#, c-format
msgid "Enter command to open file \"%s\":"
msgstr "Opdracht invoeren voor openen van bestand  \"%s\":"

#: ../src/generic/helpext.cpp:459
msgid "Entries found"
msgstr "Ingangen gevonden"

#: ../src/common/paper.cpp:142
msgid "Envelope Invite 220 x 220 mm"
msgstr "Envelop Invite 220 x 220 mm"

#: ../src/common/config.cpp:469
#, c-format
msgid ""
"Environment variables expansion failed: missing '%c' at position %u in '%s'."
msgstr ""
"Uitbreiding van omgevingsvariabelen mislukt: ontbrekende '%c' op positie %u "
"in '%s'."

#: ../src/unix/epolldispatcher.cpp:103
msgid "Error closing epoll descriptor"
msgstr "Fout bij sluiten van epoll descriptor"

#: ../src/unix/fswatcher_kqueue.cpp:114
msgid "Error closing kqueue instance"
msgstr "Fout bij sluiten van kqueue exemplaarset"

#: ../src/common/filefn.cpp:1049
#, fuzzy, c-format
msgid "Error copying the file '%s' to '%s'."
msgstr "Kopiëren van bestand '%s' naar '%s' mislukt"

#: ../src/generic/dirdlgg.cpp:222
msgid "Error creating directory"
msgstr "Fout bij het maken van map"

#: ../src/common/imagbmp.cpp:1181
msgid "Error in reading image DIB."
msgstr "Fout bij lezen afbeelding DIB."

#: ../src/propgrid/propgrid.cpp:6696
#, c-format
msgid "Error in resource: %s"
msgstr "Fout in bron: %s"

#: ../src/common/fileconf.cpp:422
msgid "Error reading config options."
msgstr "Fout bij lezen van configuratie opties."

#: ../src/common/fileconf.cpp:1029
msgid "Error saving user configuration data."
msgstr "Fout van bij het opslaan van de instellingsgegevens."

#: ../src/gtk/print.cpp:722
msgid "Error while printing: "
msgstr "Fout bij het printen: "

#: ../src/common/log.cpp:219
msgid "Error: "
msgstr "Fout: "

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:69
msgid "Esc"
msgstr "Esc"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:70
msgid "Escape"
msgstr "Escape"

#: ../src/common/fmapbase.cpp:150
msgid "Esperanto (ISO-8859-3)"
msgstr "Esperanto (ISO-8859-3)"

#: ../include/wx/generic/progdlgg.h:85
msgid "Estimated time:"
msgstr "Geschatte tijd:"

#: ../src/generic/dbgrptg.cpp:234
msgid "Executable files (*.exe)|*.exe|"
msgstr "Uitvoerbare bestanden (*.exe)|*.exe|"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:155 ../src/common/accelcmn.cpp:78
msgid "Execute"
msgstr "Uitvoeren"

#: ../src/msw/utilsexc.cpp:876
#, c-format
msgid "Execution of command '%s' failed"
msgstr "Uitvoering van opdracht '%s' mislukt"

#: ../src/common/paper.cpp:105
msgid "Executive, 7 1/4 x 10 1/2 in"
msgstr "USA Executive, 7 1/4 x 10 1/2 inch"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6009
msgid "Expand"
msgstr ""

#: ../src/msw/registry.cpp:1240
#, c-format
msgid ""
"Exporting registry key: file \"%s\" already exists and won't be overwritten."
msgstr ""
"Exporteren registersleutel: bestand \"%s\" bestaat al en wordt niet "
"overschreven."

#: ../src/common/fmapbase.cpp:195
msgid "Extended Unix Codepage for Japanese (EUC-JP)"
msgstr "Extended Unix Codepage voor Japans (EUC-JP)"

#: ../src/html/chm.cpp:725
#, c-format
msgid "Extraction of '%s' into '%s' failed."
msgstr "Extractie van '%s' in '%s' mislukt."

#: ../src/common/accelcmn.cpp:249 ../src/common/accelcmn.cpp:344
msgid "F"
msgstr "F"

#. TRANSLATORS: Label of font face name
#: ../src/propgrid/advprops.cpp:672
msgid "Face Name"
msgstr "Letterbeeld Naam"

#: ../src/unix/snglinst.cpp:269
msgid "Failed to access lock file."
msgstr "Toegang naar beveiligd bestand mislukt."

#: ../src/unix/epolldispatcher.cpp:116
#, c-format
msgid "Failed to add descriptor %d to epoll descriptor %d"
msgstr "Kon geen descriptor %d toevoegen aan epoll descriptor %d"

#: ../src/msw/dib.cpp:489
#, c-format
msgid "Failed to allocate %luKb of memory for bitmap data."
msgstr "Allokeren van %luKb geheugen voor bitmap-data is mislukt."

#: ../src/common/glcmn.cpp:115
msgid "Failed to allocate colour for OpenGL"
msgstr "Kon geen kleur allokeren voor OpenGL"

#: ../src/unix/displayx11.cpp:236
msgid "Failed to change video mode"
msgstr "Kon video modus niet veranderen"

#: ../src/common/image.cpp:3277
#, c-format
msgid "Failed to check format of image file \"%s\"."
msgstr "Controleren van formaat afbeeldingsbestand \"%s\" mislukt."

#: ../src/common/debugrpt.cpp:239
#, c-format
msgid "Failed to clean up debug report directory \"%s\""
msgstr "Opschonen van de foutopsporingsrapportage map  \"%s\" is mislukt"

#: ../src/common/filename.cpp:192
msgid "Failed to close file handle"
msgstr "Sluiten van bestands handle mislukt."

#: ../src/unix/snglinst.cpp:340
#, c-format
msgid "Failed to close lock file '%s'"
msgstr "Sluiten van vergrendeld bestand '%s' mislukt"

#: ../src/msw/clipbrd.cpp:112
msgid "Failed to close the clipboard."
msgstr "Sluiten van klembord mislukt."

#: ../src/x11/utils.cpp:208
#, c-format
msgid "Failed to close the display \"%s\""
msgstr "Kon de display \"%s\" niet sluiten"

#: ../src/msw/dialup.cpp:797
msgid "Failed to connect: missing username/password."
msgstr "Verbinding mislukt: gebruikersnaam/wachtwoord ontbreekt."

#: ../src/msw/dialup.cpp:743
msgid "Failed to connect: no ISP to dial."
msgstr "Verbinding mislukt: geen internetaanbieder om te bellen."

#: ../src/common/textfile.cpp:203
#, c-format
msgid "Failed to convert file \"%s\" to Unicode."
msgstr "Conversie bestand \"%s\" naar Unicode mislukt."

#: ../src/generic/logg.cpp:956
msgid "Failed to copy dialog contents to the clipboard."
msgstr "Kopiëren inhoud dialoogvenster naar klembord mislukt."

#: ../src/msw/registry.cpp:692
#, c-format
msgid "Failed to copy registry value '%s'"
msgstr "Kopiëren van registerwaarde '%s' mislukt"

#: ../src/msw/registry.cpp:701
#, c-format
msgid "Failed to copy the contents of registry key '%s' to '%s'."
msgstr "Kopiëren van registersleutel '%s' naar '%s' mislukt."

#: ../src/common/filefn.cpp:1015
#, c-format
msgid "Failed to copy the file '%s' to '%s'"
msgstr "Kopiëren van bestand '%s' naar '%s' mislukt"

#: ../src/msw/registry.cpp:679
#, c-format
msgid "Failed to copy the registry subkey '%s' to '%s'."
msgstr "Kopiëren van registersubsleutel '%s' naar '%s' mislukt."

#: ../src/msw/dde.cpp:1070
msgid "Failed to create DDE string"
msgstr "Maken van DDE-string mislukt"

#: ../src/msw/mdi.cpp:616
msgid "Failed to create MDI parent frame."
msgstr "Maken van MDI-hoofdvenster mislukt."

#: ../src/common/filename.cpp:1027
msgid "Failed to create a temporary file name"
msgstr "Maken van een tijdelijke bestandsnaam mislukt"

#: ../src/msw/utilsexc.cpp:228
msgid "Failed to create an anonymous pipe"
msgstr "Maken van een anonieme pipe mislukt"

#: ../src/msw/ole/automtn.cpp:522
#, c-format
msgid "Failed to create an instance of \"%s\""
msgstr "Aanmaken exemplaarset van \"%s\" mislukt"

#: ../src/msw/dde.cpp:437
#, c-format
msgid "Failed to create connection to server '%s' on topic '%s'"
msgstr "Maken van verbinding met server '%s' voor onderwerp '%s' mislukt"

#: ../src/msw/cursor.cpp:204
msgid "Failed to create cursor."
msgstr "Cursor aanmaken mislukt."

#: ../src/common/debugrpt.cpp:209
#, c-format
msgid "Failed to create directory \"%s\""
msgstr "Aanmaken map \"%s\" mislukt"

#: ../src/generic/dirdlgg.cpp:220
#, c-format
msgid ""
"Failed to create directory '%s'\n"
"(Do you have the required permissions?)"
msgstr ""
"Maken van map '%s' mislukt\n"
"(Heeft u de benodigde machtiging?)"

#: ../src/unix/epolldispatcher.cpp:84
msgid "Failed to create epoll descriptor"
msgstr "aanmaken epoll descriptor mislukt"

#: ../src/msw/mimetype.cpp:238
#, c-format
msgid "Failed to create registry entry for '%s' files."
msgstr "Maken van registersleutel '%s' mislukt."

#: ../src/msw/fdrepdlg.cpp:409
#, c-format
msgid "Failed to create the standard find/replace dialog (error code %d)"
msgstr "Maken van het standaard zoek/vervang dialoog mislukt (foutcode %d)"

#: ../src/unix/wakeuppipe.cpp:52
msgid "Failed to create wake up pipe used by event loop."
msgstr "Aanmaken wake-up pipe gebruikt door gebeurtenis-lus mislukt."

#: ../src/html/winpars.cpp:730
#, c-format
msgid "Failed to display HTML document in %s encoding"
msgstr "Weergeven van HTML-document in %s-codering mislukt"

#: ../src/msw/clipbrd.cpp:124
msgid "Failed to empty the clipboard."
msgstr "Legen van klembord mislukt."

#: ../src/unix/displayx11.cpp:212
msgid "Failed to enumerate video modes"
msgstr "Enumereren van video modes mislukt"

#: ../src/msw/dde.cpp:722
msgid "Failed to establish an advise loop with DDE server"
msgstr "Opzetten van advies-lus met de DDE-server mislukt"

#: ../src/msw/dialup.cpp:629 ../src/msw/dialup.cpp:863
#, c-format
msgid "Failed to establish dialup connection: %s"
msgstr "Maken van inbelverbinding mislukt: %s"

#: ../src/unix/utilsunx.cpp:611
#, c-format
msgid "Failed to execute '%s'\n"
msgstr "Uitvoeren van '%s' mislukt\n"

#: ../src/common/debugrpt.cpp:720
msgid "Failed to execute curl, please install it in PATH."
msgstr "Uitvoeren van curl mislukt, installeer het alstublieft in PATH."

#: ../src/msw/ole/automtn.cpp:505
#, c-format
msgid "Failed to find CLSID of \"%s\""
msgstr "Vinden van CLSID \"%s\" mislukt."

#: ../src/common/regex.cpp:431 ../src/common/regex.cpp:479
#, c-format
msgid "Failed to find match for regular expression: %s"
msgstr "Vinden van overeenkomst voor reguliere expressie '%s' mislukt"

#: ../src/msw/dialup.cpp:695
#, c-format
msgid "Failed to get ISP names: %s"
msgstr "Verkrijgen van namen van internetaanbieders mislukt: %s"

#: ../src/msw/ole/automtn.cpp:574
#, c-format
msgid "Failed to get OLE automation interface for \"%s\""
msgstr "Verkrijgen van OLE automation interface voor \"%s\" mislukt"

#: ../src/msw/clipbrd.cpp:711
msgid "Failed to get data from the clipboard"
msgstr "Gegevens van klembord ophalen mislukt"

#: ../src/common/time.cpp:223
msgid "Failed to get the local system time"
msgstr "Verkrijgen van lokale systeemtijd mislukt"

#: ../src/common/filefn.cpp:1345
msgid "Failed to get the working directory"
msgstr "Verkrijgen van de werk map mislukt"

#: ../src/univ/theme.cpp:114
msgid "Failed to initialize GUI: no built-in themes found."
msgstr "Initialiseren van GUI mislukt: Geen ingebouwd thema gevonden."

#: ../src/msw/helpchm.cpp:63
msgid "Failed to initialize MS HTML Help."
msgstr "Initialiseren van MS HTML Help mislukt."

#: ../src/msw/glcanvas.cpp:1381
msgid "Failed to initialize OpenGL"
msgstr "Initialiseren van OpenGL mislukt."

#: ../src/msw/dialup.cpp:858
#, c-format
msgid "Failed to initiate dialup connection: %s"
msgstr "Maken van inbelverbinding mislukt: %s"

#: ../src/gtk/textctrl.cpp:1128
msgid "Failed to insert text in the control."
msgstr "Kan geen tekst aanbrengen in de control."

#: ../src/unix/snglinst.cpp:241
#, c-format
msgid "Failed to inspect the lock file '%s'"
msgstr "Inspecteren van grendelbestand '%s' mislukt"

#: ../src/unix/appunix.cpp:182
msgid "Failed to install signal handler"
msgstr "Installeren van signaal handler mislukt"

#: ../src/unix/threadpsx.cpp:1167
msgid ""
"Failed to join a thread, potential memory leak detected - please restart the "
"program"
msgstr ""
"Aansluiten bij een thread mislukt, mogelijk geheugenlek aangetroffen - "
"herstart het programma a.u.b."

#: ../src/msw/utils.cpp:629
#, c-format
msgid "Failed to kill process %d"
msgstr "Abrupt afsluiten van proces %d mislukt"

#: ../src/common/image.cpp:2500
#, c-format
msgid "Failed to load bitmap \"%s\" from resources."
msgstr "Laden van bitmap \"%s\" van bronnen mislukt."

#: ../src/common/image.cpp:2509
#, c-format
msgid "Failed to load icon \"%s\" from resources."
msgstr "Laden van icoon \"%s\" van bronnen mislukt."

#: ../src/common/iconbndl.cpp:225
#, fuzzy, c-format
msgid "Failed to load icons from resource '%s'."
msgstr "Laden van icoon \"%s\" van bronnen mislukt."

#: ../src/common/iconbndl.cpp:200
#, c-format
msgid "Failed to load image %%d from file '%s'."
msgstr "Laden van afbeelding %%d van bestand '%s' mislukt."

#: ../src/common/iconbndl.cpp:208
#, c-format
msgid "Failed to load image %d from stream."
msgstr "Laden van afbeelding %d van stream mislukt."

#: ../src/common/image.cpp:2587 ../src/common/image.cpp:2606
#, c-format
msgid "Failed to load image from file \"%s\"."
msgstr "Laden van afbeelding van bestand \"'%s\" mislukt."

#: ../src/msw/enhmeta.cpp:97
#, c-format
msgid "Failed to load metafile from file \"%s\"."
msgstr "Laden van metabestand uit bestand \"%s\" mislukt."

#: ../src/msw/volume.cpp:327
msgid "Failed to load mpr.dll."
msgstr "Laden van mpr.dll mislukt."

#: ../src/msw/utils.cpp:953
#, c-format
msgid "Failed to load resource \"%s\"."
msgstr "Laden van bronbestand \"%s\" mislukt."

#: ../src/common/dynlib.cpp:92
#, c-format
msgid "Failed to load shared library '%s'"
msgstr "Laden van gedeelde bibliotheek '%s' mislukt"

#: ../src/osx/core/sound.cpp:145
#, c-format
msgid "Failed to load sound from \"%s\" (error %d)."
msgstr "Laden van geluid \"%s\" mislukt (fout %d)."

#: ../src/msw/utils.cpp:960
#, c-format
msgid "Failed to lock resource \"%s\"."
msgstr "Vergrendelen van bronbestand \"%s\" mislukt."

#: ../src/unix/snglinst.cpp:198
#, c-format
msgid "Failed to lock the lock file '%s'"
msgstr "Vergrendelen van het vergrendelde bestand '%s' mislukt"

#: ../src/unix/epolldispatcher.cpp:136
#, c-format
msgid "Failed to modify descriptor %d in epoll descriptor %d"
msgstr "Modificeren van descriptor %d in epoll descriptor %d mislukt"

#: ../src/common/filename.cpp:2575
#, c-format
msgid "Failed to modify file times for '%s'"
msgstr "Veranderen van bestandstijden van '%s' mislukt"

#: ../src/common/selectdispatcher.cpp:258
msgid "Failed to monitor I/O channels"
msgstr "Toezicht houden op I/O kanalen mislukt"

#: ../src/common/filename.cpp:175
#, c-format
msgid "Failed to open '%s' for reading"
msgstr "Openen van '%s'  voor lezen mislukt"

#: ../src/common/filename.cpp:180
#, c-format
msgid "Failed to open '%s' for writing"
msgstr "Openen van '%s'  voor schrijven mislukt"

#: ../src/html/chm.cpp:141
#, c-format
msgid "Failed to open CHM archive '%s'."
msgstr "Openen van CHM archief  '%s' mislukt."

#: ../src/common/utilscmn.cpp:1126
#, c-format
msgid "Failed to open URL \"%s\" in default browser."
msgstr "Openen van URL \"%s\" in standaard browser mislukt."

#: ../include/wx/msw/private/fswatcher.h:92
#, c-format
msgid "Failed to open directory \"%s\" for monitoring."
msgstr "Openen van map \"%s\"  voor controleren mislukt."

#: ../src/x11/utils.cpp:227
#, c-format
msgid "Failed to open display \"%s\"."
msgstr "Openen van display \"%s\" mislukt."

#: ../src/common/filename.cpp:1062
msgid "Failed to open temporary file."
msgstr "Openen van tijdelijk bestand mislukt."

#: ../src/msw/clipbrd.cpp:91
msgid "Failed to open the clipboard."
msgstr "Openen van klembord mislukt."

#: ../src/common/translation.cpp:1184
#, c-format
msgid "Failed to parse Plural-Forms: '%s'"
msgstr "Kan Plural-Forms:'%s' niet parseren"

#: ../src/unix/mediactrl.cpp:1214
#, c-format
msgid "Failed to prepare playing \"%s\"."
msgstr "Voorbereiden om \"%s\" af te spelen mislukt."

#: ../src/msw/clipbrd.cpp:600
msgid "Failed to put data on the clipboard"
msgstr "Bewaren van gegevens op klembord mislukt"

#: ../src/unix/snglinst.cpp:278
msgid "Failed to read PID from lock file."
msgstr "Lezen van PID van vergrendeld bestand mislukt."

#: ../src/common/fileconf.cpp:433
msgid "Failed to read config options."
msgstr "Lezen van config opties mislukt."

#: ../src/common/docview.cpp:681
#, c-format
msgid "Failed to read document from the file \"%s\"."
msgstr "Lezen van document van het bestand \"%s\" mislukt."

#: ../src/dfb/evtloop.cpp:98
msgid "Failed to read event from DirectFB pipe"
msgstr "Lezen van gebeurtenis uit DirectFB pipe mislukt"

#: ../src/unix/wakeuppipe.cpp:120
msgid "Failed to read from wake-up pipe"
msgstr "Lezen van wake-up pipe mislukt"

#: ../src/unix/utilsunx.cpp:679
msgid "Failed to redirect child process input/output"
msgstr "Omleiden van I/O van child proces mislukt"

#: ../src/msw/utilsexc.cpp:701
msgid "Failed to redirect the child process IO"
msgstr "Omleiden van I/O van child proces mislukt"

#: ../src/msw/dde.cpp:288
#, c-format
msgid "Failed to register DDE server '%s'"
msgstr "Registratie van DDE-server '%s' mislukt"

#: ../src/common/fontmap.cpp:245
#, c-format
msgid "Failed to remember the encoding for the charset '%s'."
msgstr "Onthouden van codering voor tekenset '%s' mislukt."

#: ../src/common/debugrpt.cpp:227
#, c-format
msgid "Failed to remove debug report file \"%s\""
msgstr "Verwijderen van foutopsporingsrapport bestand \"%s\" is mislukt."

#: ../src/unix/snglinst.cpp:328
#, c-format
msgid "Failed to remove lock file '%s'"
msgstr "Verwijderen van vergrendeld bestand '%s' mislukt"

#: ../src/unix/snglinst.cpp:288
#, c-format
msgid "Failed to remove stale lock file '%s'."
msgstr "Verwijderen van verouderd vergrendeld bestand '%s' mislukt."

#: ../src/msw/registry.cpp:529
#, c-format
msgid "Failed to rename registry value '%s' to '%s'."
msgstr "Hernoemen van registerwaarde '%s' naar '%s' mislukt"

#: ../src/common/filefn.cpp:1122
#, c-format
msgid ""
"Failed to rename the file '%s' to '%s' because the destination file already "
"exists."
msgstr ""
"Hernoemen van het bestand ‘%s’ naar ‘%s’ mislukt omdat het doelbestand al "
"bestaat."

#: ../src/msw/registry.cpp:634
#, c-format
msgid "Failed to rename the registry key '%s' to '%s'."
msgstr "Hernoemen van registersleutel '%s' naar '%s' mislukt"

#: ../src/common/filename.cpp:2671
#, c-format
msgid "Failed to retrieve file times for '%s'"
msgstr "Verkrijgen van bestandstijden voor '%s' mislukt"

#: ../src/msw/dialup.cpp:468
msgid "Failed to retrieve text of RAS error message"
msgstr "Verkrijgen van tekst van inbel-foutmelding mislukt"

#: ../src/msw/clipbrd.cpp:748
msgid "Failed to retrieve the supported clipboard formats"
msgstr "Verkrijgen van ondersteunde klembord-formaten mislukt"

#: ../src/common/docview.cpp:652
#, c-format
msgid "Failed to save document to the file \"%s\"."
msgstr "Opslaan van document naar het bestand \"%s\" mislukt."

#: ../src/msw/dib.cpp:269
#, c-format
msgid "Failed to save the bitmap image to file \"%s\"."
msgstr "Opslaan van bitmap afbeelding naar bestand \"%s\" mislukt."

#: ../src/msw/dde.cpp:763
msgid "Failed to send DDE advise notification"
msgstr "Versturen van DDE-adviesnotificatie mislukt"

#: ../src/common/ftp.cpp:402
#, c-format
msgid "Failed to set FTP transfer mode to %s."
msgstr "Instellen van FTP transfer mode naar %s mislukt."

#: ../src/msw/clipbrd.cpp:427
msgid "Failed to set clipboard data."
msgstr "Instellen van klembordgegevens mislukt."

#: ../src/unix/snglinst.cpp:181
#, c-format
msgid "Failed to set permissions on lock file '%s'"
msgstr "Instellen van permissies op grendelbestand '%s' mislukt"

#: ../src/unix/utilsunx.cpp:668
msgid "Failed to set process priority"
msgstr "Instellen van prioriteit van proces mislukt"

#: ../src/common/file.cpp:559
msgid "Failed to set temporary file permissions"
msgstr "Instellen van machtigingen van tijdelijk bestand mislukt"

#: ../src/gtk/textctrl.cpp:1072
msgid "Failed to set text in the text control."
msgstr "Kan geen tekst aanbrengen in tekst-control."

#: ../src/unix/threadpsx.cpp:1298
#, c-format
msgid "Failed to set thread concurrency level to %lu"
msgstr "Instellen van concurrency-niveau van thread op %lu mislukt"

#: ../src/unix/threadpsx.cpp:1424
#, c-format
msgid "Failed to set thread priority %d."
msgstr "Instellen van prioriteit van thread %d mislukt."

#: ../src/unix/utilsunx.cpp:783
msgid "Failed to set up non-blocking pipe, the program might hang."
msgstr "Niet-blokkerende pipe instellen mislukt. Het programma kan hangen."

#: ../src/common/fs_mem.cpp:261
#, c-format
msgid "Failed to store image '%s' to memory VFS!"
msgstr "Opslaan van afbeelding '%s' in geheugen VFS mislukt!"

#: ../src/dfb/evtloop.cpp:170
msgid "Failed to switch DirectFB pipe to non-blocking mode"
msgstr "Overschakelen van DirectFB pipe naar non-blocking modus mislukt "

#: ../src/unix/wakeuppipe.cpp:59
msgid "Failed to switch wake up pipe to non-blocking mode"
msgstr "Overschakelen van wake-up pipe naar non-blocking modus mislukt "

#: ../src/unix/threadpsx.cpp:1605
msgid "Failed to terminate a thread."
msgstr "Beëindigen van thread mislukt."

#: ../src/msw/dde.cpp:741
msgid "Failed to terminate the advise loop with DDE server"
msgstr "Beëindigen van advies-lus met de DDE-server mislukt"

#: ../src/msw/dialup.cpp:938
#, c-format
msgid "Failed to terminate the dialup connection: %s"
msgstr "Ophangen van inbelverbinding mislukt: %s"

#: ../src/common/filename.cpp:2590
#, c-format
msgid "Failed to touch the file '%s'"
msgstr "Touchen van bestand '%s' mislukt"

#: ../src/unix/snglinst.cpp:334
#, c-format
msgid "Failed to unlock lock file '%s'"
msgstr "Ontgrendelen van het vergrendelde bestand '%s' mislukt"

#: ../src/msw/dde.cpp:309
#, c-format
msgid "Failed to unregister DDE server '%s'"
msgstr "Deregistreren van DDE-server %s mislukt"

#: ../src/unix/epolldispatcher.cpp:155
#, c-format
msgid "Failed to unregister descriptor %d from epoll descriptor %d"
msgstr ""
"Registratie teniet doen van descriptor %d van epoll descriptor %d mislukt"

#: ../src/common/fileconf.cpp:1006
msgid "Failed to update user configuration file."
msgstr "Updaten van gebruikersconfiguratie bestand is mislukt."

#: ../src/common/debugrpt.cpp:733
#, c-format
msgid "Failed to upload the debug report (error code %d)."
msgstr "Uploaden van het foutopsporingsrapport is mislukt (foutcode %d)."

#: ../src/unix/snglinst.cpp:168
#, c-format
msgid "Failed to write to lock file '%s'"
msgstr "Schrijven naar vergrendeld bestand '%s' mislukt"

#. TRANSLATORS: Name of Boolean false value
#: ../src/propgrid/propgrid.cpp:209
msgid "False"
msgstr "Onwaar"

#. TRANSLATORS: Label of font family
#: ../src/propgrid/advprops.cpp:694
msgid "Family"
msgstr "Familie"

#: ../src/common/stockitem.cpp:157
msgid "File"
msgstr "Bestand"

#: ../src/common/docview.cpp:669
#, c-format
msgid "File \"%s\" could not be opened for reading."
msgstr "Openen van bestand \"%s\"  voor lezen mislukt."

#: ../src/common/docview.cpp:646
#, c-format
msgid "File \"%s\" could not be opened for writing."
msgstr "Openen van bestand \"%s\" voor schrijven mislukt."

#: ../src/generic/filedlgg.cpp:346 ../src/gtk/filedlg.cpp:57
#, c-format
msgid "File '%s' already exists, do you really want to overwrite it?"
msgstr "Bestand '%s' bestaat al, overschrijven?"

#: ../src/common/filefn.cpp:1156
#, c-format
msgid "File '%s' couldn't be removed"
msgstr "Bestand '%s' kon niet worden verwijderd"

#: ../src/common/filefn.cpp:1139
#, c-format
msgid "File '%s' couldn't be renamed '%s'"
msgstr "Bestand '%s' kon niet worden hernoemd naar '%s'"

#: ../src/richtext/richtextctrl.cpp:3081 ../src/common/textcmn.cpp:953
msgid "File couldn't be loaded."
msgstr "Bestand kon niet worden geladen."

#: ../src/msw/filedlg.cpp:393
#, c-format
msgid "File dialog failed with error code %0lx."
msgstr "Bestandsdialoog mislukt met foutcode %0lx."

#: ../src/common/docview.cpp:1789
msgid "File error"
msgstr "Bestandsfout"

#: ../src/generic/dirctrlg.cpp:588 ../src/generic/filectrlg.cpp:770
msgid "File name exists already."
msgstr "Bestandsnaam bestaat al."

#: ../src/motif/filedlg.cpp:220
msgid "Files"
msgstr "Bestanden"

#: ../src/common/filefn.cpp:1591
#, c-format
msgid "Files (%s)"
msgstr "Bestanden (%s)"

#: ../src/motif/filedlg.cpp:218
msgid "Filter"
msgstr "Filter"

#: ../src/common/stockitem.cpp:159
msgid "First"
msgstr "Eerste"

#: ../src/common/prntbase.cpp:1548
msgid "First page"
msgstr "Eerste pagina"

#: ../src/richtext/richtextsizepage.cpp:521
msgid "Fixed"
msgstr "Vast"

#: ../src/html/helpwnd.cpp:1206
msgid "Fixed font:"
msgstr "Niet proportioneel lettertype:"

#: ../src/html/helpwnd.cpp:1269
msgid "Fixed size face.<br> <b>bold</b> <i>italic</i> "
msgstr "Lettertype met vaste breedte.<br> <b>vet</b> <i>cursief</i> "

#: ../src/richtext/richtextsizepage.cpp:229
msgid "Floating"
msgstr "Zwevend"

#: ../src/common/stockitem.cpp:160
msgid "Floppy"
msgstr "Diskette"

#: ../src/common/paper.cpp:111
msgid "Folio, 8 1/2 x 13 in"
msgstr "Folio, 8 1/2 x 13 inch"

#: ../src/richtext/richtextfontpage.cpp:221
msgid "Font &weight:"
msgstr "Lettertype z&waarte:"

#: ../src/html/helpwnd.cpp:1207
msgid "Font size:"
msgstr "Lettertype-grootte:"

#: ../src/richtext/richtextfontpage.cpp:208
msgid "Font st&yle:"
msgstr "Lettertype st&ijl:"

#: ../src/osx/carbon/fontdlg.cpp:329
msgid "Font:"
msgstr "Lettertype:"

#: ../src/dfb/fontmgr.cpp:198
#, c-format
msgid "Fonts index file %s disappeared while loading fonts."
msgstr ""
"Lettertype index bestand %s verdwenen tijdens het laden van lettertypes."

#: ../src/unix/utilsunx.cpp:645
msgid "Fork failed"
msgstr "Vork mislukt"

#: ../src/common/stockitem.cpp:161
msgid "Forward"
msgstr "Verder"

#: ../src/common/xtixml.cpp:235
msgid "Forward hrefs are not supported"
msgstr "Doorsturen van hrefs wordt niet ondersteund"

#: ../src/html/helpwnd.cpp:875
#, c-format
msgid "Found %i matches"
msgstr "%i Overeenkomsten gevonden"

#: ../src/generic/prntdlgg.cpp:238
msgid "From:"
msgstr "Van:"

#: ../src/propgrid/advprops.cpp:1604
msgid "Fuchsia"
msgstr "Fuchsiapaars"

#: ../src/common/imaggif.cpp:138
msgid "GIF: data stream seems to be truncated."
msgstr "GIF: gegevensstroom lijkt afgekapt."

#: ../src/common/imaggif.cpp:128
msgid "GIF: error in GIF image format."
msgstr "GIF: fout in GIF-bestandsformaat."

#: ../src/common/imaggif.cpp:133
msgid "GIF: not enough memory."
msgstr "GIF: onvoldoende geheugen."

#: ../src/gtk/window.cpp:4631
msgid ""
"GTK+ installed on this machine is too old to support screen compositing, "
"please install GTK+ 2.12 or later."
msgstr ""
"GTK+ geïnstalleerd op deze machine is te oud om schermsamenstellingen te "
"ondersteunen. Installeer GTK+ 2.12 of nieuwer."

#: ../src/univ/themes/gtk.cpp:525
msgid "GTK+ theme"
msgstr "GTK+ thema"

#: ../src/common/prntbase.cpp:258
msgid "Generic PostScript"
msgstr "Generiek Postscript"

#: ../src/common/paper.cpp:135
msgid "German Legal Fanfold, 8 1/2 x 13 in"
msgstr "Duitse Legal Fanfold, 8 1/2 x 13 inch"

#: ../src/common/paper.cpp:134
msgid "German Std Fanfold, 8 1/2 x 12 in"
msgstr "Duitse Std Fanfold, 8 1/2 x 12 inch"

#: ../include/wx/xtiprop.h:184
msgid "GetProperty called w/o valid getter"
msgstr "GetProperty aangeroepen zonder geldige “getter”"

#: ../include/wx/xtiprop.h:262
msgid "GetPropertyCollection called on a generic accessor"
msgstr "GetPropertyCollection aangeroepen op een generieke “accessor”"

#: ../include/wx/xtiprop.h:202
msgid "GetPropertyCollection called w/o valid collection getter"
msgstr "GetPropertyCollection aangeroepen zonder geldige “collection getter”"

#: ../src/html/helpwnd.cpp:660
msgid "Go back"
msgstr "Ga terug"

#: ../src/html/helpwnd.cpp:661
msgid "Go forward"
msgstr "Ga vooruit"

#: ../src/html/helpwnd.cpp:663
msgid "Go one level up in document hierarchy"
msgstr "Ga niveau hoger in document-hiërarchie"

#: ../src/generic/filedlgg.cpp:208 ../src/generic/dirdlgg.cpp:116
msgid "Go to home directory"
msgstr "Ga naar startmap"

#: ../src/generic/filedlgg.cpp:205
msgid "Go to parent directory"
msgstr "Ga naar bovenliggende map"

#: ../src/generic/aboutdlgg.cpp:76
msgid "Graphics art by "
msgstr "Grafische kunst door "

#: ../src/propgrid/advprops.cpp:1599
msgid "Gray"
msgstr "Grijs"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:883
msgid "GrayText"
msgstr "GrayText"

#: ../src/common/fmapbase.cpp:154
msgid "Greek (ISO-8859-7)"
msgstr "Grieks (ISO-8859-7)"

#: ../src/propgrid/advprops.cpp:1600
msgid "Green"
msgstr "Groen"

#: ../src/generic/colrdlgg.cpp:342
#, fuzzy
msgid "Green:"
msgstr "Groen"

#: ../src/richtext/richtextborderspage.cpp:615
msgid "Groove"
msgstr "Groef"

#: ../src/common/zstream.cpp:158 ../src/common/zstream.cpp:318
msgid "Gzip not supported by this version of zlib"
msgstr "Gzip niet ondersteund door deze versie van zlib"

#: ../src/html/helpwnd.cpp:1549
msgid "HTML Help Project (*.hhp)|*.hhp|"
msgstr "HTML Help Project (*.hhp)|*.hhp|"

#: ../src/html/htmlwin.cpp:681
#, c-format
msgid "HTML anchor %s does not exist."
msgstr "HTML-anchor %s bestaat niet."

#: ../src/html/helpwnd.cpp:1547
msgid "HTML files (*.html;*.htm)|*.html;*.htm|"
msgstr "HTML bestanden (*.html;*.htm)|*.html;*.htm|"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1759
msgid "Hand"
msgstr "Hand"

#: ../src/common/stockitem.cpp:162
msgid "Harddisk"
msgstr "Hardeschijf"

#: ../src/common/fmapbase.cpp:155
msgid "Hebrew (ISO-8859-8)"
msgstr "Hebreeuws (ISO-8859-8)"

#: ../src/html/helpwnd.cpp:1200
msgid "Help Browser Options"
msgstr "Help Browser Instellingen"

#: ../src/generic/helpext.cpp:454 ../src/generic/helpext.cpp:455
msgid "Help Index"
msgstr "Help Index"

#: ../src/html/helpwnd.cpp:1531
msgid "Help Printing"
msgstr "Help Afdrukken"

#: ../src/html/helpwnd.cpp:801
msgid "Help Topics"
msgstr "Hulp-onderwerpen"

#: ../src/html/helpwnd.cpp:1548
msgid "Help books (*.htb)|*.htb|Help books (*.zip)|*.zip|"
msgstr "Helpboeken (*.htb)|*.htb|Helpboeken (*.zip)|*.zip|"

#: ../src/generic/helpext.cpp:267
#, c-format
msgid "Help directory \"%s\" not found."
msgstr "Helpmap \"%s\" niet gevonden."

#: ../src/generic/helpext.cpp:275
#, c-format
msgid "Help file \"%s\" not found."
msgstr "Helpbestand \"%s\" niet gevonden."

#: ../src/html/helpctrl.cpp:63
#, c-format
msgid "Help: %s"
msgstr "Help: %s"

#: ../src/osx/menu_osx.cpp:577
#, c-format
msgid "Hide %s"
msgstr "Verberg %s"

#: ../src/osx/menu_osx.cpp:579
msgid "Hide Others"
msgstr "Verberg anderen"

#: ../src/generic/infobar.cpp:84
msgid "Hide this notification message."
msgstr "Verberg dit notificatiebericht."

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:884
msgid "Highlight"
msgstr "Markeer"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:885
msgid "HighlightText"
msgstr "Gemarkeerde tekst"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:164 ../src/common/accelcmn.cpp:65
msgid "Home"
msgstr "Thuis"

#: ../src/generic/dirctrlg.cpp:524
msgid "Home directory"
msgstr "Thuismap"

#: ../src/richtext/richtextsizepage.cpp:253
#: ../src/richtext/richtextsizepage.cpp:255
msgid "How the object will float relative to the text."
msgstr "Hoe het object zweeft relatief t.o.v. de tekst."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1760
msgid "I-Beam"
msgstr "I-Beam"

#: ../src/common/imagbmp.cpp:1196
msgid "ICO: Error in reading mask DIB."
msgstr "ICO: Fout bij lezen masker DIB."

#: ../src/common/imagbmp.cpp:1290 ../src/common/imagbmp.cpp:1390
#: ../src/common/imagbmp.cpp:1405 ../src/common/imagbmp.cpp:1416
#: ../src/common/imagbmp.cpp:1430 ../src/common/imagbmp.cpp:1478
#: ../src/common/imagbmp.cpp:1493 ../src/common/imagbmp.cpp:1507
#: ../src/common/imagbmp.cpp:1518
msgid "ICO: Error writing the image file!"
msgstr "ICO: Fout bij het wegschrijven van de afbeelding!"

#: ../src/common/imagbmp.cpp:1255
msgid "ICO: Image too tall for an icon."
msgstr "ICO: Afbeelding is te hoog voor een pictogram."

#: ../src/common/imagbmp.cpp:1263
msgid "ICO: Image too wide for an icon."
msgstr "ICO: Afbeelding is te breed voor een pictogram."

#: ../src/common/imagbmp.cpp:1603
msgid "ICO: Invalid icon index."
msgstr "ICO: Ongeldige pictogram index."

#: ../src/common/imagiff.cpp:758
msgid "IFF: data stream seems to be truncated."
msgstr "IFFF: gegevensstroom lijkt afgekapt."

#: ../src/common/imagiff.cpp:742
msgid "IFF: error in IFF image format."
msgstr "IFF: fout in IFF bestandsformaat."

#: ../src/common/imagiff.cpp:745
msgid "IFF: not enough memory."
msgstr "IFF: onvoldoende geheugen."

#: ../src/common/imagiff.cpp:748
msgid "IFF: unknown error!!!"
msgstr "IFF: onbekende fout!!!"

#: ../src/common/fmapbase.cpp:197
msgid "ISO-2022-JP"
msgstr "ISO-2022-JP"

#: ../src/html/htmprint.cpp:282
msgid ""
"If possible, try changing the layout parameters to make the printout more "
"narrow."
msgstr ""
"Indien mogelijk, probeer de opmaakparameters te veranderen om de afdruk "
"smaller te maken. "

#: ../src/generic/dbgrptg.cpp:358
msgid ""
"If you have any additional information pertaining to this bug\n"
"report, please enter it here and it will be joined to it:"
msgstr ""
"Als u additionele informatie heeft met betrekking tot deze fout,\n"
"rapporteer dit, voer het hier in en het zal er worden bijgevoegd:"

#: ../src/generic/dbgrptg.cpp:324
msgid ""
"If you wish to suppress this debug report completely, please choose the "
"\"Cancel\" button,\n"
"but be warned that it may hinder improving the program, so if\n"
"at all possible please do continue with the report generation.\n"
msgstr ""
"Als u dit foutopsporingsrapport totaal wilt onderdrukken, kies dan de "
"\"Annuleren\" knop,\n"
"maar wees gewaarschuwd dat het 't verbeteren van het programma kan "
"verhinderen, dus als\n"
"het enigszins mogelijk is, ga dan door met het genereren van het rapport.\n"

#: ../src/msw/registry.cpp:1405
#, c-format
msgid "Ignoring value \"%s\" of the key \"%s\"."
msgstr "Negeren van waarde \"%s\" van de sleutel \"%s\"."

#: ../src/common/xtistrm.cpp:295
msgid "Illegal Object Class (Non-wxEvtHandler) as Event Source"
msgstr "Illegale Object Class (Non-wxEvtHandler) als Event Source"

#: ../src/common/xti.cpp:513
msgid "Illegal Parameter Count for ConstructObject Method"
msgstr "Ilegale aantal Parameters voor ConstructObject Methode"

#: ../src/common/xti.cpp:501
msgid "Illegal Parameter Count for Create Method"
msgstr "Ilegale aantal Parameters voor Create Methode"

#: ../src/generic/dirctrlg.cpp:570 ../src/generic/filectrlg.cpp:756
msgid "Illegal directory name."
msgstr "Ongeldige mapnaam."

#: ../src/generic/filectrlg.cpp:1367
msgid "Illegal file specification."
msgstr "Ongeldige bestandsspecificatie."

#: ../src/common/image.cpp:2269
msgid "Image and mask have different sizes."
msgstr "Afbeelding en masker hebben verschillende afmetingen."

#: ../src/common/image.cpp:2746
#, c-format
msgid "Image file is not of type %d."
msgstr "Afbeeldingsbestand is niet van type %d."

#: ../src/common/image.cpp:2877
#, c-format
msgid "Image is not of type %s."
msgstr "Afbeelding is niet van type %s."

#: ../src/msw/textctrl.cpp:488
msgid ""
"Impossible to create a rich edit control, using simple text control instead. "
"Please reinstall riched32.dll"
msgstr ""
"Niet mogelijk om Rich Edit control te maken, gewone tekst wordt gebruikt. "
"Installeer riched32.dll a.u.b. opnieuw"

#: ../src/unix/utilsunx.cpp:301
msgid "Impossible to get child process input"
msgstr "Onmogelijk om child proces input te verkrijgen"

#: ../src/common/filefn.cpp:1028
#, c-format
msgid "Impossible to get permissions for file '%s'"
msgstr "Onmogelijk om machtigingen voor bestand '%s' te krijgen"

#: ../src/common/filefn.cpp:1042
#, c-format
msgid "Impossible to overwrite the file '%s'"
msgstr "Overschrijven van bestand '%s' mislukt"

#: ../src/common/filefn.cpp:1097
#, c-format
msgid "Impossible to set permissions for the file '%s'"
msgstr "Onmogelijk om machtigingen voor het bestand '%s' in te stellen"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:886
msgid "InactiveBorder"
msgstr "InactiveBorder"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:887
msgid "InactiveCaption"
msgstr "InactiveCaption"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:888
msgid "InactiveCaptionText"
msgstr "InactiveCaptionText"

#: ../src/common/gifdecod.cpp:792
#, c-format
msgid "Incorrect GIF frame size (%u, %d) for the frame #%u"
msgstr "Onjuiste GIF frame grootte (%u, %d) voor het frame #%u"

#: ../src/msw/ole/automtn.cpp:635
msgid "Incorrect number of arguments."
msgstr "Onjuist aantal argumenten. "

#: ../src/common/stockitem.cpp:165
msgid "Indent"
msgstr "Inspringen"

#: ../src/richtext/richtextformatdlg.cpp:349
msgid "Indents && Spacing"
msgstr "Inspringingen && Tussenruimtes"

#: ../src/common/stockitem.cpp:166 ../src/html/helpwnd.cpp:515
msgid "Index"
msgstr "Index"

#: ../src/common/fmapbase.cpp:159
msgid "Indian (ISO-8859-12)"
msgstr "Indisch (ISO-8859-12)"

#: ../src/common/init.cpp:287
msgid "Initialization failed in post init, aborting."
msgstr "Initialisatie mislukt in post init: voortijdig beëindigd.."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:54
msgid "Ins"
msgstr "Ins"

#. TRANSLATORS: Name of keyboard key
#: ../src/richtext/richtextsymboldlg.cpp:472 ../src/common/accelcmn.cpp:53
msgid "Insert"
msgstr "Invoegen"

#: ../src/richtext/richtextbuffer.cpp:8067
msgid "Insert Field"
msgstr "Veld invoegen"

#: ../src/richtext/richtextbuffer.cpp:7978
#: ../src/richtext/richtextbuffer.cpp:8936
msgid "Insert Image"
msgstr "Afbeelding Invoegen"

#: ../src/richtext/richtextbuffer.cpp:8025
msgid "Insert Object"
msgstr "Object invoegen"

#: ../src/richtext/richtextctrl.cpp:1286 ../src/richtext/richtextctrl.cpp:1494
#: ../src/richtext/richtextbuffer.cpp:7822
#: ../src/richtext/richtextbuffer.cpp:7852
#: ../src/richtext/richtextbuffer.cpp:7894
msgid "Insert Text"
msgstr "Tekst invoegen"

#: ../src/richtext/richtextindentspage.cpp:295
#: ../src/richtext/richtextindentspage.cpp:297
msgid "Inserts a page break before the paragraph."
msgstr "een pagina-einde invoegen voor de paragraaf."

#: ../src/richtext/richtextborderspage.cpp:617
msgid "Inset"
msgstr "Invoeging"

#: ../src/gtk/app.cpp:425
#, c-format
msgid "Invalid GTK+ command line option, use \"%s --help\""
msgstr "Ongeldig GTK+ commandoregel  optie, gebruik \"%s --help\""

#: ../src/common/imagtiff.cpp:311
msgid "Invalid TIFF image index."
msgstr "Ongeldige TIFF-afbeeldingsindex."

#: ../src/common/appcmn.cpp:273
#, c-format
msgid "Invalid display mode specification '%s'."
msgstr "Ongeldige beeldscherm mode specificatie. '%s'."

#: ../src/x11/app.cpp:127
#, c-format
msgid "Invalid geometry specification '%s'"
msgstr "Ongeldige geometrie specificatie '%s'"

#: ../src/unix/fswatcher_inotify.cpp:323
#, c-format
msgid "Invalid inotify event for \"%s\""
msgstr "Ongeldige inotify-gebeurtenis voor \"%s\""

#: ../src/unix/snglinst.cpp:312
#, c-format
msgid "Invalid lock file '%s'."
msgstr "Ongeldig vergrendeld bestand '%s'."

#: ../src/common/translation.cpp:1125
msgid "Invalid message catalog."
msgstr "Ongeldige berichtencatalogus."

#: ../src/common/xtistrm.cpp:405 ../src/common/xtistrm.cpp:420
msgid "Invalid or Null Object ID passed to GetObjectClassInfo"
msgstr "Ongeldig of Null Object ID doorgegeven naar GetObjectClassInfo"

#: ../src/common/xtistrm.cpp:435
msgid "Invalid or Null Object ID passed to HasObjectClassInfo"
msgstr "Ongeldig of Null Object ID doorgegeven naar HasObjectClassInfo"

#: ../src/common/regex.cpp:310
#, c-format
msgid "Invalid regular expression '%s': %s"
msgstr "Ongeldige reguliere expressie '%s': %s"

#: ../src/common/config.cpp:226
#, c-format
msgid "Invalid value %ld for a boolean key \"%s\" in config file."
msgstr ""
"Ongeldige waarde %ld voor een boolean sleutel \"%s\" in config bestand."

#: ../src/generic/fontdlgg.cpp:329 ../src/richtext/richtextfontpage.cpp:351
#: ../src/osx/carbon/fontdlg.cpp:361 ../src/common/stockitem.cpp:168
msgid "Italic"
msgstr "Cursief"

#: ../src/common/paper.cpp:130
msgid "Italy Envelope, 110 x 230 mm"
msgstr "Envelop 'Italy', 110 x 230 mm"

#: ../src/common/imagjpeg.cpp:270
msgid "JPEG: Couldn't load - file is probably corrupted."
msgstr "JPEG: kon niet laden - bestand is waarschijnlijk corrupt."

#: ../src/common/imagjpeg.cpp:449
msgid "JPEG: Couldn't save image."
msgstr "JPEG: kon afbeelding niet opslaan."

#: ../src/common/paper.cpp:163
msgid "Japanese Double Postcard 200 x 148 mm"
msgstr "Japanse Dubbele Briefkaart 200 x 148 mm"

#: ../src/common/paper.cpp:167
msgid "Japanese Envelope Chou #3"
msgstr "Japanse Envelop Chou #3"

#: ../src/common/paper.cpp:180
msgid "Japanese Envelope Chou #3 Rotated"
msgstr "Japanse Envelop Chou #3 gedraaid"

#: ../src/common/paper.cpp:168
msgid "Japanese Envelope Chou #4"
msgstr "Japanse Envelop Chou #4"

#: ../src/common/paper.cpp:181
msgid "Japanese Envelope Chou #4 Rotated"
msgstr "Japanse Envelop Chou #4 Gedraaid"

#: ../src/common/paper.cpp:165
msgid "Japanese Envelope Kaku #2"
msgstr "Japanse Envelop Kaku #2"

#: ../src/common/paper.cpp:178
msgid "Japanese Envelope Kaku #2 Rotated"
msgstr "Japanse Envelop Kaku #2 Gedraaid"

#: ../src/common/paper.cpp:166
msgid "Japanese Envelope Kaku #3"
msgstr "Japanse Envelop Kaku #3"

#: ../src/common/paper.cpp:179
msgid "Japanese Envelope Kaku #3 Rotated"
msgstr "Japanse Envelop Kaku #3 Gedraaid"

#: ../src/common/paper.cpp:185
msgid "Japanese Envelope You #4"
msgstr "Japanse Envelop You #4"

#: ../src/common/paper.cpp:186
msgid "Japanese Envelope You #4 Rotated"
msgstr "Japanse Envelop You #4 Gedraaid"

#: ../src/common/paper.cpp:138
msgid "Japanese Postcard 100 x 148 mm"
msgstr "Japanse Briefkaart 100 x 148 mm"

#: ../src/common/paper.cpp:175
msgid "Japanese Postcard Rotated 148 x 100 mm"
msgstr "Japanse Breifkaart Gedraaid 148 x 100 mm"

#: ../src/common/stockitem.cpp:169
msgid "Jump to"
msgstr "Spring naar"

#: ../src/common/stockitem.cpp:171
msgid "Justified"
msgstr "Uitgevuld"

#: ../src/richtext/richtextindentspage.cpp:155
#: ../src/richtext/richtextindentspage.cpp:157
#: ../src/richtext/richtextliststylepage.cpp:344
#: ../src/richtext/richtextliststylepage.cpp:346
msgid "Justify text left and right."
msgstr "Tekst Links en rechts uitlijnen."

#: ../src/common/fmapbase.cpp:163
msgid "KOI8-R"
msgstr "KOI8-R"

#: ../src/common/fmapbase.cpp:164
msgid "KOI8-U"
msgstr "KOI8-U"

#: ../src/common/accelcmn.cpp:265 ../src/common/accelcmn.cpp:347
msgid "KP_"
msgstr "KP_"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "KP_Add"
msgstr "KP_Add"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "KP_Begin"
msgstr "KP_Begin"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "KP_Decimal"
msgstr "KP_Decimal"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "KP_Delete"
msgstr "KP_Delete"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "KP_Divide"
msgstr "KP_Divide"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "KP_Down"
msgstr "KP_Down"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:100
msgid "KP_End"
msgstr "KP_End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "KP_Enter"
msgstr "KP_Enter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "KP_Equal"
msgstr "KP_Equal"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "KP_Home"
msgstr "KP_Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "KP_Insert"
msgstr "KP_Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "KP_Left"
msgstr "KP_Left"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "KP_Multiply"
msgstr "KP_Multiply"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:99
msgid "KP_Next"
msgstr "KP_Next"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "KP_PageDown"
msgstr "KP_PageDown"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "KP_PageUp"
msgstr "KP_PageUp"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:98
msgid "KP_Prior"
msgstr "KP_Prior"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "KP_Right"
msgstr "KP_Right"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "KP_Separator"
msgstr "KP_Separator"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "KP_Space"
msgstr "KP_Space"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "KP_Subtract"
msgstr "KP_Subtract"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "KP_Tab"
msgstr "KP_Tab"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "KP_Up"
msgstr "KP_Up"

#: ../src/richtext/richtextindentspage.cpp:270
msgid "L&ine spacing:"
msgstr "R&egel tussenruimte:"

#: ../src/common/stockitem.cpp:174
msgid "Last"
msgstr "Laatste"

#: ../src/common/prntbase.cpp:1572
msgid "Last page"
msgstr "Laatste pagina"

#: ../src/common/log.cpp:305
#, c-format
msgid "Last repeated message (\"%s\", %u time) wasn't output"
msgid_plural "Last repeated message (\"%s\", %u times) wasn't output"
msgstr[0] "Laatst herhaald bericht (\"%s\", %u keer) is niet uitgevoerd"
msgstr[1] "Laatst herhaald berichten (\"%s\", %u keer) zijn niet uitgevoerd"

#: ../src/common/paper.cpp:103
msgid "Ledger, 17 x 11 in"
msgstr "USA Ledger, 17 x 11 inch"

#: ../src/richtext/richtextindentspage.cpp:204
#: ../src/richtext/richtextliststylepage.cpp:390
msgid "Left (&first line):"
msgstr "Links (&eerste regel):"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1761
msgid "Left Button"
msgstr "Linker knop"

#: ../src/generic/prntdlgg.cpp:880
msgid "Left margin (mm):"
msgstr "Linkermarge (mm):"

#: ../src/richtext/richtextindentspage.cpp:141
#: ../src/richtext/richtextindentspage.cpp:143
#: ../src/richtext/richtextliststylepage.cpp:330
#: ../src/richtext/richtextliststylepage.cpp:332
msgid "Left-align text."
msgstr "Links uitgelijnde tekst."

#: ../src/common/paper.cpp:144
msgid "Legal Extra 9 1/2 x 15 in"
msgstr "Legal Extra 9 1/2 x 15 in"

#: ../src/common/paper.cpp:96
msgid "Legal, 8 1/2 x 14 in"
msgstr "USA Legal, 8 1/2 x 14 inch"

#: ../src/common/paper.cpp:143
msgid "Letter Extra 9 1/2 x 12 in"
msgstr "Letter Extra 9 1/2 x 12 in"

#: ../src/common/paper.cpp:149
msgid "Letter Extra Transverse 9.275 x 12 in"
msgstr "Letter Extra Transverse 9.275 x 12 in"

#: ../src/common/paper.cpp:152
msgid "Letter Plus 8 1/2 x 12.69 in"
msgstr "Letter Plus 8 1/2 x 12.69 in"

#: ../src/common/paper.cpp:169
msgid "Letter Rotated 11 x 8 1/2 in"
msgstr "Letter Gedraaid 11 x 8 1/2 in"

#: ../src/common/paper.cpp:101
msgid "Letter Small, 8 1/2 x 11 in"
msgstr "Letter Klein, 8 1/2 x 11 inch"

#: ../src/common/paper.cpp:147
msgid "Letter Transverse 8 1/2 x 11 in"
msgstr "Letter Transverse 8 1/2 x 11 in"

#: ../src/common/paper.cpp:95
msgid "Letter, 8 1/2 x 11 in"
msgstr "Letter, 8 1/2 x 11 inch"

#: ../src/generic/aboutdlgg.cpp:173
msgid "License"
msgstr "Licentie"

#: ../src/generic/fontdlgg.cpp:332
msgid "Light"
msgstr "Licht"

#: ../src/propgrid/advprops.cpp:1608
msgid "Lime"
msgstr "Citroengeel"

#: ../src/generic/helpext.cpp:294
#, c-format
msgid "Line %lu of map file \"%s\" has invalid syntax, skipped."
msgstr ""
"Line %lu van mappingbestand \"%s\" heeft een ongeldige syntax: overgeslagen."

#: ../src/richtext/richtextliststylepage.cpp:444
msgid "Line spacing:"
msgstr "Regel tussenruimte:"

#: ../src/html/chm.cpp:838
msgid "Link contained '//', converted to absolute link."
msgstr "Koppeling bevatte '//': omgezet naar absolute koppeling."

#: ../src/richtext/richtextformatdlg.cpp:364
msgid "List Style"
msgstr "Lijst Stijl"

#: ../src/richtext/richtextstyles.cpp:1064
msgid "List styles"
msgstr "Lijst stijlen"

#: ../src/richtext/richtextfontpage.cpp:197
#: ../src/richtext/richtextfontpage.cpp:199
msgid "Lists font sizes in points."
msgstr "Maakt overzicht van lettertypegroottes in punten."

#: ../src/richtext/richtextfontpage.cpp:190
#: ../src/richtext/richtextfontpage.cpp:192
msgid "Lists the available fonts."
msgstr "Geef overzicht beschikbare lettertypes."

#: ../src/common/fldlgcmn.cpp:340
#, c-format
msgid "Load %s file"
msgstr "Laad %s-bestand"

#: ../src/html/htmlwin.cpp:597
msgid "Loading : "
msgstr "Bezig met laden: "

#: ../src/unix/snglinst.cpp:246
#, c-format
msgid "Lock file '%s' has incorrect owner."
msgstr "grendelbestand '%s' heeft incorrecte eigenaar."

#: ../src/unix/snglinst.cpp:251
#, c-format
msgid "Lock file '%s' has incorrect permissions."
msgstr "vergrendelbestand '%s' heeft onjuiste permissies."

#: ../src/generic/logg.cpp:576
#, c-format
msgid "Log saved to the file '%s'."
msgstr "Log opgeslagen in bestand '%s'."

#: ../src/richtext/richtextliststylepage.cpp:484
#: ../src/richtext/richtextbulletspage.cpp:276
msgid "Lower case letters"
msgstr "kleineletters"

#: ../src/richtext/richtextliststylepage.cpp:486
#: ../src/richtext/richtextbulletspage.cpp:278
msgid "Lower case roman numerals"
msgstr "Kleineletters Romeinse telwoorden"

#: ../src/gtk/mdi.cpp:422 ../src/gtk1/mdi.cpp:431
msgid "MDI child"
msgstr "MDI subvenster"

#: ../src/msw/helpchm.cpp:56
msgid ""
"MS HTML Help functions are unavailable because the MS HTML Help library is "
"not installed on this machine. Please install it."
msgstr ""
"MS HTML Help functies zijn niet beschikbaar omdat de MS HTML Help "
"bibliotheek niet op deze machine is geïnstalleerd. Installeer het a.u.b."

#: ../src/univ/themes/win32.cpp:3754
msgid "Ma&ximize"
msgstr "Maximaliseren"

#: ../src/common/fmapbase.cpp:203
msgid "MacArabic"
msgstr "MacArabic"

#: ../src/common/fmapbase.cpp:222
msgid "MacArmenian"
msgstr "MacArmenian"

#: ../src/common/fmapbase.cpp:211
msgid "MacBengali"
msgstr "MacBengali"

#: ../src/common/fmapbase.cpp:217
msgid "MacBurmese"
msgstr "MacBurmese"

#: ../src/common/fmapbase.cpp:236
msgid "MacCeltic"
msgstr "MacCeltic"

#: ../src/common/fmapbase.cpp:227
msgid "MacCentralEurRoman"
msgstr "MacCentralEurRoman"

#: ../src/common/fmapbase.cpp:223
msgid "MacChineseSimp"
msgstr "MacChineseSimp"

#: ../src/common/fmapbase.cpp:201
msgid "MacChineseTrad"
msgstr "MacChineseTrad"

#: ../src/common/fmapbase.cpp:233
msgid "MacCroatian"
msgstr "MacCroatian"

#: ../src/common/fmapbase.cpp:206
msgid "MacCyrillic"
msgstr "MacCyrillic"

#: ../src/common/fmapbase.cpp:207
msgid "MacDevanagari"
msgstr "MacDevanagari"

#: ../src/common/fmapbase.cpp:231
msgid "MacDingbats"
msgstr "MacDingbats"

#: ../src/common/fmapbase.cpp:226
msgid "MacEthiopic"
msgstr "MacEthiopic"

#: ../src/common/fmapbase.cpp:229
msgid "MacExtArabic"
msgstr "MacExtArabic"

#: ../src/common/fmapbase.cpp:237
msgid "MacGaelic"
msgstr "MacGaelic"

#: ../src/common/fmapbase.cpp:221
msgid "MacGeorgian"
msgstr "MacGeorgian"

#: ../src/common/fmapbase.cpp:205
msgid "MacGreek"
msgstr "MacGreek"

#: ../src/common/fmapbase.cpp:209
msgid "MacGujarati"
msgstr "MacGujarati"

#: ../src/common/fmapbase.cpp:208
msgid "MacGurmukhi"
msgstr "MacGurmukhi"

#: ../src/common/fmapbase.cpp:204
msgid "MacHebrew"
msgstr "MacHebrew"

#: ../src/common/fmapbase.cpp:234
msgid "MacIcelandic"
msgstr "MacIcelandic"

#: ../src/common/fmapbase.cpp:200
msgid "MacJapanese"
msgstr "MacJapanese"

#: ../src/common/fmapbase.cpp:214
msgid "MacKannada"
msgstr "MacKannada"

#: ../src/common/fmapbase.cpp:238
msgid "MacKeyboardGlyphs"
msgstr "MacKeyboardGlyphs"

#: ../src/common/fmapbase.cpp:218
msgid "MacKhmer"
msgstr "MacKhmer"

#: ../src/common/fmapbase.cpp:202
msgid "MacKorean"
msgstr "MacKorean"

#: ../src/common/fmapbase.cpp:220
msgid "MacLaotian"
msgstr "MacLaotian"

#: ../src/common/fmapbase.cpp:215
msgid "MacMalayalam"
msgstr "MacMalayalam"

#: ../src/common/fmapbase.cpp:225
msgid "MacMongolian"
msgstr "MacMongolian"

#: ../src/common/fmapbase.cpp:210
msgid "MacOriya"
msgstr "MacOriya"

#: ../src/common/fmapbase.cpp:199
msgid "MacRoman"
msgstr "MacRoman"

#: ../src/common/fmapbase.cpp:235
msgid "MacRomanian"
msgstr "MacRomanian"

#: ../src/common/fmapbase.cpp:216
msgid "MacSinhalese"
msgstr "MacSinhalese"

#: ../src/common/fmapbase.cpp:230
msgid "MacSymbol"
msgstr "MacSymbol"

#: ../src/common/fmapbase.cpp:212
msgid "MacTamil"
msgstr "MacTamil"

#: ../src/common/fmapbase.cpp:213
msgid "MacTelugu"
msgstr "MacTelugu"

#: ../src/common/fmapbase.cpp:219
msgid "MacThai"
msgstr "MacThai"

#: ../src/common/fmapbase.cpp:224
msgid "MacTibetan"
msgstr "MacTibetan"

#: ../src/common/fmapbase.cpp:232
msgid "MacTurkish"
msgstr "MacTurkish"

#: ../src/common/fmapbase.cpp:228
msgid "MacVietnamese"
msgstr "MacVietnamese"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1762
msgid "Magnifier"
msgstr "Vergrootglas"

#: ../src/propgrid/advprops.cpp:2143
msgid "Make a selection:"
msgstr "Maak een selectie:"

#: ../src/richtext/richtextformatdlg.cpp:374
#: ../src/richtext/richtextmarginspage.cpp:171
msgid "Margins"
msgstr "Marges"

#: ../src/propgrid/advprops.cpp:1595
msgid "Maroon"
msgstr "Kastanjebruin"

#: ../src/generic/fdrepdlg.cpp:147
msgid "Match case"
msgstr "Hoofdlettergevoelig"

#: ../src/richtext/richtextsizepage.cpp:463
msgid "Max height:"
msgstr "Maximale hoogte:"

#: ../src/richtext/richtextsizepage.cpp:436
msgid "Max width:"
msgstr "Maximale breedte:"

#: ../src/unix/mediactrl.cpp:947
#, c-format
msgid "Media playback error: %s"
msgstr "Media-afspeelfout: %s"

#: ../src/common/fs_mem.cpp:175
#, c-format
msgid "Memory VFS already contains file '%s'!"
msgstr "Geheugen VFS bevat al bestand '%s'!"

#. TRANSLATORS: Name of keyboard key
#. TRANSLATORS: Keyword of system colour
#: ../src/common/accelcmn.cpp:73 ../src/propgrid/advprops.cpp:889
msgid "Menu"
msgstr "Menu"

#: ../src/univ/themes/metal.cpp:168
msgid "Metal theme"
msgstr "Metaal thema"

#: ../src/msw/ole/automtn.cpp:652
msgid "Method or property not found."
msgstr "Methode of eigenschap niet gevonden."

#: ../src/univ/themes/win32.cpp:3752
msgid "Mi&nimize"
msgstr "Minimaliseren"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1763
msgid "Middle Button"
msgstr "middelste knop"

#: ../src/richtext/richtextsizepage.cpp:409
msgid "Min height:"
msgstr "Minimale hoogte:"

#: ../src/richtext/richtextsizepage.cpp:382
msgid "Min width:"
msgstr "Minimale breedte:"

#: ../src/msw/ole/automtn.cpp:668
msgid "Missing a required parameter."
msgstr "Er ontbreekt een vereiste parameter."

#: ../src/generic/fontdlgg.cpp:324
msgid "Modern"
msgstr "Modern"

#: ../src/common/module.cpp:133
#, c-format
msgid "Module \"%s\" initialization failed"
msgstr "Initialisatie Module \"%s\" mislukt"

#: ../src/common/paper.cpp:131
msgid "Monarch Envelope, 3 7/8 x 7 1/2 in"
msgstr "Envelop 'Monarch', 3 7/8 x 7 1/2 inch"

#: ../src/msw/fswatcher.cpp:143
msgid "Monitoring individual files for changes is not supported currently."
msgstr ""
"Controleren van individuele bestanden op veranderingen wordt nog niet "
"ondersteund."

#: ../src/generic/editlbox.cpp:172
msgid "Move down"
msgstr "Verplaats omlaag"

#: ../src/generic/editlbox.cpp:171
msgid "Move up"
msgstr "Verplaats naar boven"

#: ../src/richtext/richtextsizepage.cpp:682
#: ../src/richtext/richtextsizepage.cpp:684
msgid "Moves the object to the next paragraph."
msgstr "Verplaatst het object naar de volgende paragraaf."

#: ../src/richtext/richtextsizepage.cpp:676
#: ../src/richtext/richtextsizepage.cpp:678
msgid "Moves the object to the previous paragraph."
msgstr "Verplaatst het object naar de vorige paragraaf."

#: ../src/richtext/richtextbuffer.cpp:9966
msgid "Multiple Cell Properties"
msgstr "Mutiple Cel eigenschappen"

#: ../src/propgrid/advprops.cpp:1596
msgid "Navy"
msgstr "Marineblauw"

#: ../src/common/stockitem.cpp:175
msgid "Network"
msgstr "Netwerk"

#: ../src/common/stockitem.cpp:176
msgid "New"
msgstr "Nieuw"

#: ../src/richtext/richtextstyledlg.cpp:243
msgid "New &Box Style..."
msgstr "Nieuwe &Vak Stijl..."

#: ../src/richtext/richtextstyledlg.cpp:225
msgid "New &Character Style..."
msgstr "Nieuw &Letterteken Stijl..."

#: ../src/richtext/richtextstyledlg.cpp:237
msgid "New &List Style..."
msgstr "Nieuwe &Lijst Stijl..."

#: ../src/richtext/richtextstyledlg.cpp:231
msgid "New &Paragraph Style..."
msgstr "Nieuwe &Paragraaf Stijl..."

#: ../src/richtext/richtextstyledlg.cpp:606
#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:654
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:820
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:893
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:934
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "New Style"
msgstr "Nieuw Stijl"

#: ../src/generic/editlbox.cpp:169
msgid "New item"
msgstr "Nieuw element"

#: ../src/generic/dirdlgg.cpp:297 ../src/generic/dirdlgg.cpp:307
#: ../src/generic/filectrlg.cpp:618 ../src/generic/filectrlg.cpp:627
msgid "NewName"
msgstr "Nieuwe map"

#: ../src/common/prntbase.cpp:1567 ../src/html/helpwnd.cpp:665
msgid "Next page"
msgstr "Volgende pagina"

#: ../include/wx/msgdlg.h:277 ../src/common/stockitem.cpp:177
#: ../src/motif/msgdlg.cpp:196
msgid "No"
msgstr "Nee"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1764
msgid "No Entry"
msgstr "Geen toegang"

#: ../src/generic/animateg.cpp:150
#, c-format
msgid "No animation handler for type %ld defined."
msgstr "Geen animatie handler voor type %ld gedefinieerd."

#: ../src/dfb/bitmap.cpp:642 ../src/dfb/bitmap.cpp:676
#, c-format
msgid "No bitmap handler for type %d defined."
msgstr "Geen bitmap handler voor type %d gedefinieerd."

#: ../src/common/utilscmn.cpp:1077
msgid "No default application configured for HTML files."
msgstr "Er is geen standaard toepassing geconfigureerd voor HTML bestanden."

#: ../src/generic/helpext.cpp:445
msgid "No entries found."
msgstr "Geen ingangen gevonden."

#: ../src/common/fontmap.cpp:421
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found,\n"
"but an alternative encoding '%s' is available.\n"
"Do you want to use this encoding (otherwise you will have to choose another "
"one)?"
msgstr ""
"Er is geen lettertype gevonden voor het tonen van tekst in de versleuteling "
"'%s',\n"
"maar een alternatieve versleuteling '%s' is beschikbaar.\n"
"Wilt u deze versleuteling gebruiken (Anders moet u een andere kiezen)?"

#: ../src/common/fontmap.cpp:426
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found.\n"
"Would you like to select a font to be used for this encoding\n"
"(otherwise the text in this encoding will not be shown correctly)?"
msgstr ""
"Geen lettertype voor het tonen van tekst in versleuteling '%s' gevonden.\n"
"Wilt u een lettertype selecteren voor deze versleuteling \n"
"(anders zal de tekst in deze versleuteling niet correct weergegeven worden)?"

#: ../src/generic/animateg.cpp:142
msgid "No handler found for animation type."
msgstr "Geen handler gevonden voor animatietype."

#: ../src/common/image.cpp:2728
msgid "No handler found for image type."
msgstr "Geen handler gevonden voor afbeeldingstype."

#: ../src/common/image.cpp:2736 ../src/common/image.cpp:2848
#: ../src/common/image.cpp:2901
#, c-format
msgid "No image handler for type %d defined."
msgstr "Geen afbeeldingshandler voor het type %d gedefinieerd."

#: ../src/common/image.cpp:2871 ../src/common/image.cpp:2915
#, c-format
msgid "No image handler for type %s defined."
msgstr "Geen afbeeldingshandler voor het type %s gedefinieerd."

#: ../src/html/helpwnd.cpp:858
msgid "No matching page found yet"
msgstr "Nog geen overeenkomende pagina gevonden"

#: ../src/unix/sound.cpp:81
msgid "No sound"
msgstr "geen geluid"

#: ../src/common/image.cpp:2277 ../src/common/image.cpp:2318
msgid "No unused colour in image being masked."
msgstr "Geen ongebruikte kleur in afbeelding gemaskeerd."

#: ../src/common/image.cpp:3374
msgid "No unused colour in image."
msgstr "Geen ongebruikte kleuren in afbeelding."

#: ../src/generic/helpext.cpp:302
#, c-format
msgid "No valid mappings found in the file \"%s\"."
msgstr "Geen geldige mappingen gevonden in het bestand \"%s\"."

#: ../src/common/fmapbase.cpp:157
msgid "Nordic (ISO-8859-10)"
msgstr "Noors (ISO-8859-10)"

#: ../src/html/helpwnd.cpp:1263
msgid "Normal face<br>and <u>underlined</u>. "
msgstr "Normale letter<br>en <u>onderstreept</u>. "

#: ../src/html/helpwnd.cpp:1205
msgid "Normal font:"
msgstr "Normaal lettertype: "

#: ../src/propgrid/props.cpp:1128
#, c-format
msgid "Not %s"
msgstr "Niet %s"

#: ../include/wx/filename.h:573 ../include/wx/filename.h:578
msgid "Not available"
msgstr "Niet beschikbaar"

#: ../src/richtext/richtextfontpage.cpp:358
msgid "Not underlined"
msgstr "Niet onderstreept"

#: ../src/common/paper.cpp:115
msgid "Note, 8 1/2 x 11 in"
msgstr "Notitie, 8 1/2 x 11 inch"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "Num *"
msgstr "Num *"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "Num +"
msgstr "Num +"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "Num ,"
msgstr "Num ,"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "Num -"
msgstr "Num -"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "Num ."
msgstr "Num ."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "Num /"
msgstr "Num /"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "Num ="
msgstr "Num ="

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "Num Begin"
msgstr "Num Begin"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "Num Delete"
msgstr "Num Delete"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "Num Down"
msgstr "Num Down"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:100
msgid "Num End"
msgstr "Num End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "Num Enter"
msgstr "Num Enter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "Num Home"
msgstr "Num Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "Num Insert"
msgstr "Num Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:86
msgid "Num Lock"
msgstr "Num Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "Num Page Down"
msgstr "Num Page Down"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "Num Page Up"
msgstr "Num Page Up"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "Num Right"
msgstr "Num Right"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "Num Space"
msgstr "Num Space"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "Num Tab"
msgstr "Num Tab"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "Num Up"
msgstr "Num Up"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "Num left"
msgstr "Num left"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:86
msgid "Num_lock"
msgstr "Num_lock"

#: ../src/richtext/richtextliststylepage.cpp:487
#: ../src/richtext/richtextbulletspage.cpp:279
msgid "Numbered outline"
msgstr "Genummerde outline"

#: ../src/msw/ole/automtn.cpp:692
#, c-format
msgid "OLE Automation error in %s: %s"
msgstr "OLE Automatiseringsfout in %s: %s"

#: ../include/wx/richtext/richtextimagedlg.h:37
msgid "Object Properties"
msgstr "Object eigenschappen"

#: ../src/msw/ole/automtn.cpp:660
msgid "Object implementation does not support named arguments."
msgstr "Object implementatie ondersteunt geen benoemde argumenten."

#: ../src/common/xtixml.cpp:264
msgid "Objects must have an id attribute"
msgstr "Objecten moeten een id attribuut hebben"

#: ../src/propgrid/advprops.cpp:1601
msgid "Olive"
msgstr "Olijfgroen"

#: ../src/richtext/richtextbackgroundpage.cpp:325
msgid "Opaci&ty:"
msgstr "Ondoorzich&tigheid:"

#: ../src/generic/colrdlgg.cpp:354
#, fuzzy
msgid "Opacity:"
msgstr "Ondoorzich&tigheid:"

#: ../src/common/docview.cpp:1773 ../src/common/docview.cpp:1815
msgid "Open File"
msgstr "Open Bestand"

#: ../src/html/helpwnd.cpp:671 ../src/html/helpwnd.cpp:1554
msgid "Open HTML document"
msgstr "HTML-document openen"

#: ../src/generic/dbgrptg.cpp:163
#, c-format
msgid "Open file \"%s\""
msgstr "Open bestand \"%s\""

#: ../src/common/stockitem.cpp:179
msgid "Open..."
msgstr "Openen..."

#: ../src/unix/glx11.cpp:506 ../src/msw/glcanvas.cpp:592
#, fuzzy
msgid "OpenGL 3.0 or later is not supported by the OpenGL driver."
msgstr "Core OpenGL-profiel wordt niet ondersteund door de OpenGL-driver."

#: ../src/generic/dirctrlg.cpp:599 ../src/generic/dirdlgg.cpp:323
#: ../src/generic/filectrlg.cpp:642 ../src/generic/filectrlg.cpp:786
msgid "Operation not permitted."
msgstr "Bewerking niet toegestaan."

#: ../src/common/cmdline.cpp:900
#, c-format
msgid "Option '%s' can't be negated"
msgstr "Optie '%s' kon niet worden genegeerd"

#: ../src/common/cmdline.cpp:1064
#, c-format
msgid "Option '%s' requires a value."
msgstr "Optie '%s' vereist een waarde."

#: ../src/common/cmdline.cpp:1147
#, c-format
msgid "Option '%s': '%s' cannot be converted to a date."
msgstr "Optie '%s': '%s' kan niet naar een datum worden geconverteerd."

#: ../src/generic/prntdlgg.cpp:618
msgid "Options"
msgstr "Instellingen"

#: ../src/propgrid/advprops.cpp:1606
msgid "Orange"
msgstr "Oranje"

#: ../src/generic/prntdlgg.cpp:615 ../src/generic/prntdlgg.cpp:869
msgid "Orientation"
msgstr "Oriëntatie"

#: ../src/common/windowid.cpp:242
msgid "Out of window IDs.  Recommend shutting down application."
msgstr "Geen Venster ID's meer. Aanbevolen de toepassing af te sluiten."

#: ../src/richtext/richtextborderspage.cpp:398
#: ../src/richtext/richtextborderspage.cpp:556
msgid "Outline"
msgstr "Outline"

#: ../src/richtext/richtextborderspage.cpp:618
msgid "Outset"
msgstr "Aanvang"

#: ../src/msw/ole/automtn.cpp:656
msgid "Overflow while coercing argument values."
msgstr "Overloop tijdens afdwingen argument waarden."

#: ../src/common/imagpcx.cpp:457 ../src/common/imagpcx.cpp:480
msgid "PCX: couldn't allocate memory"
msgstr "PCX: kon geen geheugen reserveren"

#: ../src/common/imagpcx.cpp:456
msgid "PCX: image format unsupported"
msgstr "PCX: bestandsformaat niet ondersteund"

#: ../src/common/imagpcx.cpp:479
msgid "PCX: invalid image"
msgstr "PCX: ongeldige afbeelding"

#: ../src/common/imagpcx.cpp:442
msgid "PCX: this is not a PCX file."
msgstr "PCX: dit is geen PCX-bestand."

#: ../src/common/imagpcx.cpp:459 ../src/common/imagpcx.cpp:481
msgid "PCX: unknown error !!!"
msgstr "PCX: onbekende fout!"

#: ../src/common/imagpcx.cpp:458
msgid "PCX: version number too low"
msgstr "PCX: versienummer te laag"

#: ../src/common/imagpnm.cpp:91
msgid "PNM: Couldn't allocate memory."
msgstr "PNM: kon geen geheugen reserveren."

#: ../src/common/imagpnm.cpp:73
msgid "PNM: File format is not recognized."
msgstr "PNM: bestandsformaat niet herkend"

#: ../src/common/imagpnm.cpp:112 ../src/common/imagpnm.cpp:134
#: ../src/common/imagpnm.cpp:156
msgid "PNM: File seems truncated."
msgstr "PNM: bestand lijkt afgekapt."

#: ../src/common/paper.cpp:187
msgid "PRC 16K 146 x 215 mm"
msgstr "PRC 16K 146 x 215 mm"

#: ../src/common/paper.cpp:200
msgid "PRC 16K Rotated"
msgstr "PRC 16K Gedraaid"

#: ../src/common/paper.cpp:188
msgid "PRC 32K 97 x 151 mm"
msgstr "PRC 32K 97 x 151 mm"

#: ../src/common/paper.cpp:201
msgid "PRC 32K Rotated"
msgstr "PRC 32K Gedraaid"

#: ../src/common/paper.cpp:189
msgid "PRC 32K(Big) 97 x 151 mm"
msgstr "PRC 32K(Big) 97 x 151 mm"

#: ../src/common/paper.cpp:202
msgid "PRC 32K(Big) Rotated"
msgstr "PRC 32K(Groot) Gedraaid"

#: ../src/common/paper.cpp:190
msgid "PRC Envelope #1 102 x 165 mm"
msgstr "PRC Envelop #1 102 x 165 mm"

#: ../src/common/paper.cpp:203
msgid "PRC Envelope #1 Rotated 165 x 102 mm"
msgstr "PRC Envelop #1 Gedraaid 165 x 102 mm"

#: ../src/common/paper.cpp:199
msgid "PRC Envelope #10 324 x 458 mm"
msgstr "PRC Envelop #10 324 x 458 mm"

#: ../src/common/paper.cpp:212
msgid "PRC Envelope #10 Rotated 458 x 324 mm"
msgstr "PRC Envelop #10 Gedraaid 458 x 324 mm"

#: ../src/common/paper.cpp:191
msgid "PRC Envelope #2 102 x 176 mm"
msgstr "PRC Envelop #2 102 x 176 mm"

#: ../src/common/paper.cpp:204
msgid "PRC Envelope #2 Rotated 176 x 102 mm"
msgstr "PRC Envelop #2 Gedraaid 176 x 102 mm"

#: ../src/common/paper.cpp:192
msgid "PRC Envelope #3 125 x 176 mm"
msgstr "PRC Envelop #3 125 x 176 mm"

#: ../src/common/paper.cpp:205
msgid "PRC Envelope #3 Rotated 176 x 125 mm"
msgstr "PRC Envelop #3 Gedraaid 176 x 125 mm"

#: ../src/common/paper.cpp:193
msgid "PRC Envelope #4 110 x 208 mm"
msgstr "PRC Envelop #4 110 x 208 mm"

#: ../src/common/paper.cpp:206
msgid "PRC Envelope #4 Rotated 208 x 110 mm"
msgstr "PRC Envelop #4 Gedraaid 208 x 110 mm"

#: ../src/common/paper.cpp:194
msgid "PRC Envelope #5 110 x 220 mm"
msgstr "PRC Envelop #5 110 x 220 mm"

#: ../src/common/paper.cpp:207
msgid "PRC Envelope #5 Rotated 220 x 110 mm"
msgstr "PRC Envelop #5 Gedraaid 220 x 110 mm"

#: ../src/common/paper.cpp:195
msgid "PRC Envelope #6 120 x 230 mm"
msgstr "PRC Envelop #6 120 x 230 mm"

#: ../src/common/paper.cpp:208
msgid "PRC Envelope #6 Rotated 230 x 120 mm"
msgstr "Envelop C5, 162 x 229 mm"

#: ../src/common/paper.cpp:196
msgid "PRC Envelope #7 160 x 230 mm"
msgstr "PRC Envelop #7 160 x 230 mm"

#: ../src/common/paper.cpp:209
msgid "PRC Envelope #7 Rotated 230 x 160 mm"
msgstr "PRC Envelop #7 Gedraaid 230 x 160 mm"

#: ../src/common/paper.cpp:197
msgid "PRC Envelope #8 120 x 309 mm"
msgstr "PRC Envelop #8 120 x 309 mm"

#: ../src/common/paper.cpp:210
msgid "PRC Envelope #8 Rotated 309 x 120 mm"
msgstr "PRC Envelop #8 Gedraaid 309 x 120 mm"

#: ../src/common/paper.cpp:198
msgid "PRC Envelope #9 229 x 324 mm"
msgstr "PRC Envelop #9 229 x 324 mm"

#: ../src/common/paper.cpp:211
msgid "PRC Envelope #9 Rotated 324 x 229 mm"
msgstr "PRC Envelop #9 Gedraaid 324 x 229 mm"

#: ../src/richtext/richtextmarginspage.cpp:285
msgid "Padding"
msgstr "Uitvulling"

#: ../src/common/prntbase.cpp:2074
#, c-format
msgid "Page %d"
msgstr "Pagina %d"

#: ../src/common/prntbase.cpp:2072
#, c-format
msgid "Page %d of %d"
msgstr "Pagina %d van %d"

#: ../src/gtk/print.cpp:826
msgid "Page Setup"
msgstr "Pagina-instellingen"

#: ../src/generic/prntdlgg.cpp:828 ../src/common/prntbase.cpp:484
msgid "Page setup"
msgstr "Pagina instellingen"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:58
msgid "PageDown"
msgstr "PageDown"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:57
msgid "PageUp"
msgstr "PageUp"

#: ../src/generic/prntdlgg.cpp:216
msgid "Pages"
msgstr "Pagina's"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1765
msgid "Paint Brush"
msgstr "Penseel"

#: ../src/generic/prntdlgg.cpp:602 ../src/generic/prntdlgg.cpp:801
#: ../src/generic/prntdlgg.cpp:842 ../src/generic/prntdlgg.cpp:855
#: ../src/generic/prntdlgg.cpp:1052 ../src/generic/prntdlgg.cpp:1057
msgid "Paper size"
msgstr "Papierformaat"

#: ../src/richtext/richtextstyles.cpp:1062
msgid "Paragraph styles"
msgstr "Paragraaf stijlen"

#: ../src/common/xtistrm.cpp:465
msgid "Passing a already registered object to SetObject"
msgstr "Al geregistreerd object doorgegeven aan SetObject"

#: ../src/common/xtistrm.cpp:476
msgid "Passing an unknown object to GetObject"
msgstr "Doorgave van een onbekend object naar GetObject"

#: ../src/common/stockitem.cpp:262
msgid "Paste selection"
msgstr "Selectie plakken"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1766
msgid "Pencil"
msgstr "Potlood"

#: ../src/richtext/richtextliststylepage.cpp:222
#: ../src/richtext/richtextbulletspage.cpp:159
msgid "Peri&od"
msgstr "Peri&ode"

#: ../src/generic/filectrlg.cpp:430
msgid "Permissions"
msgstr "Machtigingen"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:60
msgid "PgDn"
msgstr "PgDn"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:59
msgid "PgUp"
msgstr "PgUp"

#: ../src/richtext/richtextbuffer.cpp:12868
msgid "Picture Properties"
msgstr "Afbeelding Eigenschappen"

#: ../include/wx/unix/pipe.h:47
msgid "Pipe creation failed"
msgstr "Maken van pipe mislukt"

#: ../src/gtk1/fontdlg.cpp:74
msgid "Please choose a valid font."
msgstr "Kies a.u.b. een geldig lettertype."

#: ../src/generic/filedlgg.cpp:357 ../src/gtk/filedlg.cpp:73
msgid "Please choose an existing file."
msgstr "Kies a.u.b. een bestaand bestand."

#: ../src/html/helpwnd.cpp:800
msgid "Please choose the page to display:"
msgstr "Selecteer een pagina om te tonen:"

#: ../src/msw/dialup.cpp:764
msgid "Please choose which ISP do you want to connect to"
msgstr "Kies a.u.b. een internetaanbieder waarmee u verbinding wilt maken"

#: ../src/common/headerctrlcmn.cpp:59
msgid "Please select the columns to show and define their order:"
msgstr "Selecteer de kolommen voor weergeven en definiëren van hun volgorde:"

#: ../src/common/prntbase.cpp:538
msgid "Please wait while printing..."
msgstr "Een ogenblik geduld. Bezig met printen..."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1767
msgid "Point Left"
msgstr "Wijs links"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1768
msgid "Point Right"
msgstr "Wijs rechts"

#. TRANSLATORS: Label of font point size
#: ../src/propgrid/advprops.cpp:662
msgid "Point Size"
msgstr "Puntgrootte"

#: ../src/generic/prntdlgg.cpp:298
msgid "PostScript file"
msgstr "PostScript-bestand"

#: ../src/osx/menu_osx.cpp:568
msgid "Preferences..."
msgstr "Voorkeuren..."

#: ../src/common/prntbase.cpp:546
msgid "Preparing"
msgstr "Voorbereiden"

#: ../src/generic/fontdlgg.cpp:455 ../src/osx/carbon/fontdlg.cpp:390
#: ../src/html/helpwnd.cpp:1222
msgid "Preview:"
msgstr "Afdrukvoorbeeld:"

#: ../src/common/prntbase.cpp:1553 ../src/html/helpwnd.cpp:664
msgid "Previous page"
msgstr "Vorige pagina"

#: ../include/wx/prntbase.h:399 ../src/common/docview.cpp:1268
msgid "Print Preview"
msgstr "Afdrukvoorbeeld"

#: ../src/common/prntbase.cpp:2015 ../src/common/prntbase.cpp:2057
#: ../src/common/prntbase.cpp:2065
msgid "Print Preview Failure"
msgstr "Afdrukvoorbeeld mislukt"

#: ../src/generic/prntdlgg.cpp:224
msgid "Print Range"
msgstr "Afdrukbereik"

#: ../src/generic/prntdlgg.cpp:449
msgid "Print Setup"
msgstr "Afdrukinstellingen"

#: ../src/generic/prntdlgg.cpp:621
msgid "Print in colour"
msgstr "In kleur afdrukken"

#: ../src/common/stockitem.cpp:182
msgid "Print previe&w..."
msgstr "&Afdrukvoorbeeld..."

#: ../src/common/docview.cpp:1262
msgid "Print preview creation failed."
msgstr "Maken afdrukvoorbeeld mislukt."

#: ../src/common/stockitem.cpp:182
msgid "Print preview..."
msgstr "Afdrukvoorbeeld..."

#: ../src/generic/prntdlgg.cpp:630
msgid "Print spooling"
msgstr "Afdruk-spoolen"

#: ../src/html/helpwnd.cpp:675
msgid "Print this page"
msgstr "Deze pagina afdrukken"

#: ../src/generic/prntdlgg.cpp:185
msgid "Print to File"
msgstr "Naar bestand afdrukken"

#: ../src/common/stockitem.cpp:183
msgid "Print..."
msgstr "Afdrukken..."

#: ../src/generic/prntdlgg.cpp:633
msgid "Printer command:"
msgstr "Printercommando:"

#: ../src/generic/prntdlgg.cpp:180
msgid "Printer options"
msgstr "Printer-opties"

#: ../src/generic/prntdlgg.cpp:645
msgid "Printer options:"
msgstr "Printer-opties:"

#: ../src/generic/prntdlgg.cpp:916
msgid "Printer..."
msgstr "Printer..."

#: ../include/wx/richtext/richtextprint.h:163 ../src/common/prntbase.cpp:535
#: ../src/html/htmprint.cpp:277
msgid "Printing"
msgstr "Bezig met afdrukken"

#: ../src/common/prntbase.cpp:612
msgid "Printing "
msgstr "Bezig met afdrukken"

#: ../src/common/prntbase.cpp:347
msgid "Printing Error"
msgstr "Afdrukfout"

#: ../src/common/prntbase.cpp:565
#, c-format
msgid "Printing page %d"
msgstr "Bezig met afdrukken van pagina %d..."

#: ../src/common/prntbase.cpp:570
#, c-format
msgid "Printing page %d of %d"
msgstr "Bezig met afdrukken van pagina %d van %d"

#: ../src/generic/printps.cpp:201
#, c-format
msgid "Printing page %d..."
msgstr "Bezig met afdrukken van pagina %d..."

#: ../src/generic/printps.cpp:161
msgid "Printing..."
msgstr "Bezig met afdrukken..."

#: ../include/wx/richtext/richtextprint.h:109 ../include/wx/prntbase.h:267
#: ../src/common/docview.cpp:2132
msgid "Printout"
msgstr "Afdruk"

#: ../src/common/debugrpt.cpp:560
#, c-format
msgid ""
"Processing debug report has failed, leaving the files in \"%s\" directory."
msgstr ""
"Verwerking van foutopsporingsrapport mislukt. Bestanden zijn achtergelaten "
"in de \"%s\" map."

#: ../src/common/stockitem.cpp:184
msgid "Properties"
msgstr "Eigenschappen"

#: ../src/propgrid/manager.cpp:237
msgid "Property"
msgstr "Eigenschap"

#. TRANSLATORS: Caption of message box displaying any property error
#: ../src/propgrid/propgrid.cpp:3185 ../src/propgrid/propgrid.cpp:3318
msgid "Property Error"
msgstr "Eigenschapsfout"

#: ../src/propgrid/advprops.cpp:1597
msgid "Purple"
msgstr "Paars"

#: ../src/common/paper.cpp:112
msgid "Quarto, 215 x 275 mm"
msgstr "Kwarto, 215 x 275 mm"

#: ../src/generic/logg.cpp:1016
msgid "Question"
msgstr "Vraag"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1769
msgid "Question Arrow"
msgstr "Vraagteken pijl"

#: ../src/common/stockitem.cpp:156
msgid "Quit"
msgstr "Afsluiten"

#: ../src/common/stockitem.cpp:263
msgid "Quit this program"
msgstr "Dit programma afsluiten"

#: ../src/common/accelcmn.cpp:338
msgid "RawCtrl+"
msgstr "RawCtrl+"

#: ../src/common/ffile.cpp:109 ../src/common/ffile.cpp:133
#, c-format
msgid "Read error on file '%s'"
msgstr "Leesfout bij bestand '%s'"

#: ../src/common/secretstore.cpp:199
#, fuzzy, c-format
msgid "Reading password for \"%s/%s\" failed: %s."
msgstr "Aanmaken van '%s' in '%s' mislukte."

#: ../src/propgrid/advprops.cpp:1605
msgid "Red"
msgstr "Rood"

#: ../src/generic/colrdlgg.cpp:339
msgid "Red:"
msgstr ""

#: ../src/common/stockitem.cpp:264
msgid "Redo last action"
msgstr "Herhaal laatste actie"

#: ../src/common/stockitem.cpp:186
msgid "Refresh"
msgstr "Verversen"

#: ../src/msw/registry.cpp:626
#, c-format
msgid "Registry key '%s' already exists."
msgstr "Registersleutel '%s' bestaat al."

#: ../src/msw/registry.cpp:595
#, c-format
msgid "Registry key '%s' does not exist, cannot rename it."
msgstr "Registersleutel '%s' bestaat niet, kan niet hernoemen."

#: ../src/msw/registry.cpp:727
#, c-format
msgid ""
"Registry key '%s' is needed for normal system operation,\n"
"deleting it will leave your system in unusable state:\n"
"operation aborted."
msgstr ""
"Registersleutel '%s' is nodig voor normaal systeemgebruik,\n"
"wissen maakt uw systeem onbruikbaar:\n"
"bewerking afgebroken."

#: ../src/msw/registry.cpp:954
#, c-format
msgid "Registry value \"%s\" is not binary (but of type %s)"
msgstr ""

#: ../src/msw/registry.cpp:917
#, c-format
msgid "Registry value \"%s\" is not numeric (but of type %s)"
msgstr ""

#: ../src/msw/registry.cpp:1003
#, c-format
msgid "Registry value \"%s\" is not text (but of type %s)"
msgstr ""

#: ../src/msw/registry.cpp:521
#, c-format
msgid "Registry value '%s' already exists."
msgstr "Registerwaarde '%s' bestaat al."

#: ../src/richtext/richtextsizepage.cpp:519
msgid "Relative"
msgstr "Relatief"

#: ../src/generic/helpext.cpp:458
msgid "Relevant entries:"
msgstr "Relevante ingangen:"

#: ../include/wx/generic/progdlgg.h:86
msgid "Remaining time:"
msgstr "Resterende tijd:"

#: ../src/richtext/richtextctrl.cpp:1562
msgid "Remove Bullet"
msgstr "Bolletje weghalen"

#: ../src/html/helpwnd.cpp:433
msgid "Remove current page from bookmarks"
msgstr "Verwijder huidige pagina uit favorieten"

#: ../src/common/rendcmn.cpp:194
#, c-format
msgid "Renderer \"%s\" has incompatible version %d.%d and couldn't be loaded."
msgstr ""
"Renderer \"%s\" heeft incompatibele versie %d.%d en kan niet worden geladen."

#: ../src/richtext/richtextbuffer.cpp:4527
msgid "Renumber List"
msgstr "Hernummer lijst"

#: ../src/common/stockitem.cpp:188
msgid "Rep&lace"
msgstr "&Vervangen"

#: ../src/richtext/richtextctrl.cpp:3673 ../src/common/stockitem.cpp:188
msgid "Replace"
msgstr "Vervangen"

#: ../src/generic/fdrepdlg.cpp:182
msgid "Replace &all"
msgstr "Allemaal vervangen"

#: ../src/common/stockitem.cpp:261
msgid "Replace selection"
msgstr "Selectie vervangen"

#: ../src/generic/fdrepdlg.cpp:124
msgid "Replace with:"
msgstr "Vervangen met:"

#: ../src/common/valtext.cpp:163
msgid "Required information entry is empty."
msgstr "Vereiste informatieregel is leeg."

#: ../src/common/translation.cpp:1975
#, c-format
msgid "Resource '%s' is not a valid message catalog."
msgstr "Bronbestand '%s' is geen geldige berichtencatalogus."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:56
msgid "Return"
msgstr "Terugtoets"

#: ../src/common/stockitem.cpp:189
msgid "Revert to Saved"
msgstr "Terug naar Opgeslagen"

#: ../src/richtext/richtextborderspage.cpp:616
msgid "Ridge"
msgstr "Rug"

#: ../src/richtext/richtextfontpage.cpp:313
msgid "Rig&ht-to-left"
msgstr "Rech&ts-naar-links"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1754
msgid "Right Arrow"
msgstr "Right Arrow"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1770
msgid "Right Button"
msgstr "Rechter knop"

#: ../src/generic/prntdlgg.cpp:892
msgid "Right margin (mm):"
msgstr "Rechtermarge (mm):"

#: ../src/richtext/richtextindentspage.cpp:148
#: ../src/richtext/richtextindentspage.cpp:150
#: ../src/richtext/richtextliststylepage.cpp:337
#: ../src/richtext/richtextliststylepage.cpp:339
msgid "Right-align text."
msgstr "Rechtsuitgelijnde tekst."

#: ../src/generic/fontdlgg.cpp:322
msgid "Roman"
msgstr "Romein"

#: ../src/generic/datavgen.cpp:5916
#, c-format
msgid "Row %i"
msgstr ""

#: ../src/richtext/richtextliststylepage.cpp:299
#: ../src/richtext/richtextbulletspage.cpp:239
msgid "S&tandard bullet name:"
msgstr "S&tandaard naam opsommingsteken:"

#: ../src/common/accelcmn.cpp:268 ../src/common/accelcmn.cpp:350
msgid "SPECIAL"
msgstr "SPECIAAL"

#: ../src/common/fldlgcmn.cpp:342
#, c-format
msgid "Save %s file"
msgstr "Sla %s-bestand op"

#: ../src/generic/logg.cpp:512
msgid "Save &As..."
msgstr "Opslaan &Als..."

#: ../src/common/docview.cpp:366
msgid "Save As"
msgstr "Opslaan Als"

#: ../src/common/stockitem.cpp:191
msgid "Save as"
msgstr "Opslaan Als"

#: ../src/common/stockitem.cpp:267
msgid "Save current document"
msgstr "Huidig document opslaan"

#: ../src/common/stockitem.cpp:268
msgid "Save current document with a different filename"
msgstr "Het huidige bestand onder een nieuwe naam opslaan"

#: ../src/generic/logg.cpp:512
msgid "Save log contents to file"
msgstr "Sla log-gegevens op in bestand"

#: ../src/common/secretstore.cpp:179
#, fuzzy, c-format
msgid "Saving password for \"%s/%s\" failed: %s."
msgstr "Aanmaken van '%s' in '%s' mislukte."

#: ../src/generic/fontdlgg.cpp:325
msgid "Script"
msgstr "Script"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Scroll Lock"
msgstr "Scroll Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Scroll_lock"
msgstr "Scroll_lock"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:890
msgid "Scrollbar"
msgstr "Scrollbar"

#: ../src/html/helpwnd.cpp:537
msgid ""
"Search contents of help book(s) for all occurrences of the text you typed "
"above"
msgstr ""
"Zoek in inhoudsopgave van helpbestand(en) naar alle plaatsen waar de tekst "
"die u boven heeft getypt voorkomt."

#: ../src/generic/fdrepdlg.cpp:160
msgid "Search direction"
msgstr "Zoek richting"

#: ../src/generic/fdrepdlg.cpp:112
msgid "Search for:"
msgstr "Zoeken naar:"

#: ../src/html/helpwnd.cpp:1052
msgid "Search in all books"
msgstr "Zoek in alle boeken"

#: ../src/html/helpwnd.cpp:857
msgid "Searching..."
msgstr "Bezig met zoeken..."

#: ../src/generic/dirctrlg.cpp:446
msgid "Sections"
msgstr "Secties"

#: ../src/common/ffile.cpp:238
#, c-format
msgid "Seek error on file '%s'"
msgstr "Zoekfout bij bestand '%s'"

#: ../src/common/ffile.cpp:228
#, c-format
msgid "Seek error on file '%s' (large files not supported by stdio)"
msgstr ""
"opzoek fout bij bestand  '%s' (grote bestanden niet ondersteund door stdio)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:76
msgid "Select"
msgstr "Selecteer"

#: ../src/richtext/richtextctrl.cpp:337 ../src/osx/textctrl_osx.cpp:581
#: ../src/common/stockitem.cpp:192 ../src/msw/textctrl.cpp:2512
msgid "Select &All"
msgstr "Selecteer alles"

#: ../src/common/stockitem.cpp:192 ../src/stc/stc_i18n.cpp:21
msgid "Select All"
msgstr "Selecteer alles"

#: ../src/common/docview.cpp:1895
msgid "Select a document template"
msgstr "Selecteer een documentsjabloon"

#: ../src/common/docview.cpp:1969
msgid "Select a document view"
msgstr "Selecteer een documentweergave"

#: ../src/richtext/richtextfontpage.cpp:226
#: ../src/richtext/richtextfontpage.cpp:228
msgid "Select regular or bold."
msgstr "Selecteer Normaal of Vet."

#: ../src/richtext/richtextfontpage.cpp:213
#: ../src/richtext/richtextfontpage.cpp:215
msgid "Select regular or italic style."
msgstr "Selecteer normale of cursieve stijl."

#: ../src/richtext/richtextfontpage.cpp:239
#: ../src/richtext/richtextfontpage.cpp:241
msgid "Select underlining or no underlining."
msgstr "Selecteer onderstreept of normaal."

#: ../src/richtext/richtextliststylepage.cpp:187
#: ../src/richtext/richtextliststylepage.cpp:189
msgid "Selects the list level to edit."
msgstr "Selecteert het lijstniveau voor bewerking."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:82
msgid "Separator"
msgstr "Scheidingsteken"

#: ../src/common/cmdline.cpp:1083
#, c-format
msgid "Separator expected after the option '%s'."
msgstr "Scheidingsteken verwacht na de optie '%s'."

#: ../src/osx/menu_osx.cpp:572
msgid "Services"
msgstr "Diensten"

#: ../src/richtext/richtextbuffer.cpp:11217
msgid "Set Cell Style"
msgstr "Cel stijl instellen"

#: ../include/wx/xtiprop.h:175
msgid "SetProperty called w/o valid setter"
msgstr "SetProperty aangeroepen zonder geldige \"setter\""

#: ../src/generic/prntdlgg.cpp:188
msgid "Setup..."
msgstr "Instellingen..."

#: ../src/msw/dialup.cpp:544
msgid "Several active dialup connections found, choosing one randomly."
msgstr ""
"Meerdere actieve inbelverbindingen gevonden, willekeurige keuze gemaakt."

#: ../src/richtext/richtextbackgroundpage.cpp:271
msgid "Sh&adow spread:"
msgstr "Sch&aduwbreedte:"

#: ../src/richtext/richtextbackgroundpage.cpp:179
msgid "Shadow"
msgstr "Schaduw"

#: ../src/richtext/richtextbackgroundpage.cpp:258
msgid "Shadow c&olour:"
msgstr "Schad&uwkleur:"

#: ../src/common/accelcmn.cpp:335
msgid "Shift+"
msgstr "Shift+"

#: ../src/generic/dirdlgg.cpp:147
msgid "Show &hidden directories"
msgstr "Toon &verborgen mappen"

#: ../src/generic/filectrlg.cpp:983
msgid "Show &hidden files"
msgstr "Toon &Verborgen bestanden"

#: ../src/osx/menu_osx.cpp:580
msgid "Show All"
msgstr "Toon alles"

#: ../src/html/helpwnd.cpp:492
msgid "Show all"
msgstr "Toon alles"

#: ../src/html/helpwnd.cpp:503
msgid "Show all items in index"
msgstr "Toon alle elementen in de index"

#: ../src/html/helpwnd.cpp:658
msgid "Show/hide navigation panel"
msgstr "Toon/verberg navigatie-paneel"

#: ../src/richtext/richtextsymboldlg.cpp:421
#: ../src/richtext/richtextsymboldlg.cpp:423
msgid "Shows a Unicode subset."
msgstr "Toont een Unicode subset."

#: ../src/richtext/richtextliststylepage.cpp:472
#: ../src/richtext/richtextliststylepage.cpp:474
#: ../src/richtext/richtextbulletspage.cpp:263
#: ../src/richtext/richtextbulletspage.cpp:265
msgid "Shows a preview of the bullet settings."
msgstr "Toont een voorbeeld van de opsommingtekens instellingen."

#: ../src/richtext/richtextfontpage.cpp:330
#: ../src/richtext/richtextfontpage.cpp:332
msgid "Shows a preview of the font settings."
msgstr "Toon een voorbeeld van de lettertype instellingen."

#: ../src/osx/carbon/fontdlg.cpp:394 ../src/osx/carbon/fontdlg.cpp:396
msgid "Shows a preview of the font."
msgstr "Toont een voorbeeld van het lettertype."

#: ../src/richtext/richtextindentspage.cpp:303
#: ../src/richtext/richtextindentspage.cpp:305
msgid "Shows a preview of the paragraph settings."
msgstr "Toont een voorbeeld van de paragraaf instellingen."

#: ../src/generic/fontdlgg.cpp:460 ../src/generic/fontdlgg.cpp:462
msgid "Shows the font preview."
msgstr "Toont het lettertype voorbeeld."

#: ../src/propgrid/advprops.cpp:1607
msgid "Silver"
msgstr "Zilver"

#: ../src/univ/themes/mono.cpp:516
msgid "Simple monochrome theme"
msgstr "Eenvoudig monochroom thema"

#: ../src/richtext/richtextindentspage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:449
msgid "Single"
msgstr "Enkel"

#: ../src/osx/carbon/fontdlg.cpp:339
msgid "Size:"
msgstr "Grootte:"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1775
msgid "Sizing"
msgstr "Dimensionering"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1772
msgid "Sizing N-S"
msgstr "Dimensionering N-Z"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1771
msgid "Sizing NE-SW"
msgstr "Dimensionering NO-ZW"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1773
msgid "Sizing NW-SE"
msgstr "Dimensionering NW-ZO"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1774
msgid "Sizing W-E"
msgstr "Dimensionering W-O"

#: ../src/msw/progdlg.cpp:801
msgid "Skip"
msgstr "Overslaan"

#: ../src/generic/fontdlgg.cpp:330
msgid "Slant"
msgstr "Schuin"

#: ../src/richtext/richtextfontpage.cpp:289
msgid "Small C&apitals"
msgstr "Klein kapitaal"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:79
msgid "Snapshot"
msgstr "Momentopname"

#: ../src/richtext/richtextborderspage.cpp:611
msgid "Solid"
msgstr "Solide"

#: ../src/common/docview.cpp:1791
msgid "Sorry, could not open this file."
msgstr "Sorry, kon dit bestand niet openen."

#: ../src/common/prntbase.cpp:2057 ../src/common/prntbase.cpp:2065
msgid "Sorry, not enough memory to create a preview."
msgstr "Sorry, onvoldoende geheugen voor afdrukweergave."

#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "Sorry, that name is taken. Please choose another."
msgstr "Helaas, die naam bestaat al. Kies een andere."

#: ../src/common/docview.cpp:1814
msgid "Sorry, the format for this file is unknown."
msgstr "Helaas, het formaat van dit bestand is onbekend."

#: ../src/unix/sound.cpp:492
msgid "Sound data are in unsupported format."
msgstr "De geluidsdata zijn in een niet ondersteund formaat."

#: ../src/unix/sound.cpp:477
#, c-format
msgid "Sound file '%s' is in unsupported format."
msgstr "Geluidsbestand '%s' heeft een niet ondersteund formaat."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:67
msgid "Space"
msgstr "Spatie"

#: ../src/common/stockitem.cpp:197
msgid "Spell Check"
msgstr "Spellingscontrole"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1776
msgid "Spraycan"
msgstr "Spuitbus"

#: ../src/common/paper.cpp:104
msgid "Statement, 5 1/2 x 8 1/2 in"
msgstr "USA Statement, 5 1/2 x 8 1/2 inch"

#: ../src/richtext/richtextsizepage.cpp:518
#: ../src/richtext/richtextsizepage.cpp:523
msgid "Static"
msgstr "Statisch"

#: ../src/common/stockitem.cpp:198
msgid "Stop"
msgstr "Stoppen"

#: ../src/common/stockitem.cpp:199
msgid "Strikethrough"
msgstr "Doorhalen"

#: ../src/common/colourcmn.cpp:45
#, c-format
msgid "String To Colour : Incorrect colour specification : %s"
msgstr "Tekenreeks Naar Kleur : Incorrecte kleur specificatie: %s"

#: ../include/wx/richtext/richtextstyledlg.h:46
msgid "Style Organiser"
msgstr "Stijl Organiseren"

#: ../src/osx/carbon/fontdlg.cpp:348
msgid "Style:"
msgstr "Stijl:"

#: ../src/richtext/richtextfontpage.cpp:303
msgid "Subscrip&t"
msgstr "Onderschrif&t"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:83
msgid "Subtract"
msgstr "Aftrekken"

#: ../src/richtext/richtextfontpage.cpp:296
msgid "Supe&rscript"
msgstr "Bovensch&rift"

#: ../src/common/paper.cpp:150
msgid "SuperA/SuperA/A4 227 x 356 mm"
msgstr "SuperA/SuperA/A4 227 x 356 mm"

#: ../src/common/paper.cpp:151
msgid "SuperB/SuperB/A3 305 x 487 mm"
msgstr "SuperB/SuperB/A3 305 x 487 mm"

#: ../src/richtext/richtextfontpage.cpp:320
msgid "Suppress hyphe&nation"
msgstr "Woordafbreking onderdrukken"

#: ../src/generic/fontdlgg.cpp:326
msgid "Swiss"
msgstr "Schreefloos"

#: ../src/richtext/richtextliststylepage.cpp:488
#: ../src/richtext/richtextbulletspage.cpp:280
msgid "Symbol"
msgstr "Symbool"

#: ../src/richtext/richtextliststylepage.cpp:288
#: ../src/richtext/richtextbulletspage.cpp:227
msgid "Symbol &font:"
msgstr "Symbool &lettertype"

#: ../include/wx/richtext/richtextsymboldlg.h:47
msgid "Symbols"
msgstr "Symbolen"

#: ../src/common/imagtiff.cpp:369 ../src/common/imagtiff.cpp:382
#: ../src/common/imagtiff.cpp:741
msgid "TIFF: Couldn't allocate memory."
msgstr "TIFF: kon geen geheugen reserveren."

#: ../src/common/imagtiff.cpp:301
msgid "TIFF: Error loading image."
msgstr "TIFF: fout bij laden van afbeelding."

#: ../src/common/imagtiff.cpp:468
msgid "TIFF: Error reading image."
msgstr "TIFF: fout bij lezen van afbeelding."

#: ../src/common/imagtiff.cpp:608
msgid "TIFF: Error saving image."
msgstr "TIFF: fout bij opslaan van afbeelding."

#: ../src/common/imagtiff.cpp:846
msgid "TIFF: Error writing image."
msgstr "TIFF: fout bij schrijven van afbeelding."

#: ../src/common/imagtiff.cpp:355
msgid "TIFF: Image size is abnormally big."
msgstr "TIFF: Afbeeldingsgrootte is abnormaal groot."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:68
msgid "Tab"
msgstr "Tab"

#: ../src/richtext/richtextbuffer.cpp:11498
msgid "Table Properties"
msgstr "Tabel eigenschappen"

#: ../src/common/paper.cpp:145
msgid "Tabloid Extra 11.69 x 18 in"
msgstr "Tabloid Extra 11.69 x 18 in"

#: ../src/common/paper.cpp:102
msgid "Tabloid, 11 x 17 in"
msgstr "USA Tabloid, 11 x 17 inch"

#: ../src/richtext/richtextformatdlg.cpp:354
msgid "Tabs"
msgstr "Tabs"

#: ../src/propgrid/advprops.cpp:1598
msgid "Teal"
msgstr "Blauwgroen"

#: ../src/generic/fontdlgg.cpp:327
msgid "Teletype"
msgstr "Niet proportioneel (Teletype)"

#: ../src/common/docview.cpp:1896
msgid "Templates"
msgstr "Sjablonen"

#: ../src/common/fmapbase.cpp:158
msgid "Thai (ISO-8859-11)"
msgstr "Thais (ISO-8859-11)"

#: ../src/common/ftp.cpp:619
msgid "The FTP server doesn't support passive mode."
msgstr "De FTP server ondersteunt niet passieve mode."

#: ../src/common/ftp.cpp:605
msgid "The FTP server doesn't support the PORT command."
msgstr "De FTP server ondersteunt het PORT commando niet."

#: ../src/richtext/richtextliststylepage.cpp:215
#: ../src/richtext/richtextliststylepage.cpp:217
#: ../src/richtext/richtextbulletspage.cpp:151
#: ../src/richtext/richtextbulletspage.cpp:153
msgid "The available bullet styles."
msgstr "De beschikbare opsommingsteken stijlen."

#: ../src/richtext/richtextstyledlg.cpp:202
#: ../src/richtext/richtextstyledlg.cpp:204
msgid "The available styles."
msgstr "De beschikbare Stijlen."

#: ../src/richtext/richtextbackgroundpage.cpp:168
#: ../src/richtext/richtextbackgroundpage.cpp:170
msgid "The background colour."
msgstr "De achtergrondkleur."

#: ../src/richtext/richtextborderspage.cpp:267
#: ../src/richtext/richtextborderspage.cpp:269
#: ../src/richtext/richtextborderspage.cpp:301
#: ../src/richtext/richtextborderspage.cpp:303
#: ../src/richtext/richtextborderspage.cpp:335
#: ../src/richtext/richtextborderspage.cpp:337
#: ../src/richtext/richtextborderspage.cpp:369
#: ../src/richtext/richtextborderspage.cpp:371
#: ../src/richtext/richtextborderspage.cpp:435
#: ../src/richtext/richtextborderspage.cpp:437
#: ../src/richtext/richtextborderspage.cpp:469
#: ../src/richtext/richtextborderspage.cpp:471
#: ../src/richtext/richtextborderspage.cpp:503
#: ../src/richtext/richtextborderspage.cpp:505
#: ../src/richtext/richtextborderspage.cpp:537
#: ../src/richtext/richtextborderspage.cpp:539
msgid "The border line style."
msgstr "Lijnstijl van de rand"

#: ../src/richtext/richtextmarginspage.cpp:267
#: ../src/richtext/richtextmarginspage.cpp:269
msgid "The bottom margin size."
msgstr "De grootte van de bodem marge."

#: ../src/richtext/richtextmarginspage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:383
msgid "The bottom padding size."
msgstr "De grootte van de bodem uitvulruimte."

#: ../src/richtext/richtextsizepage.cpp:639
#: ../src/richtext/richtextsizepage.cpp:641
#: ../src/richtext/richtextsizepage.cpp:653
#: ../src/richtext/richtextsizepage.cpp:655
msgid "The bottom position."
msgstr "De onderpositie."

#: ../src/richtext/richtextliststylepage.cpp:254
#: ../src/richtext/richtextliststylepage.cpp:256
#: ../src/richtext/richtextliststylepage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:277
#: ../src/richtext/richtextbulletspage.cpp:191
#: ../src/richtext/richtextbulletspage.cpp:193
#: ../src/richtext/richtextbulletspage.cpp:214
#: ../src/richtext/richtextbulletspage.cpp:216
msgid "The bullet character."
msgstr "Het opsommingsteken letterteken."

#: ../src/richtext/richtextsymboldlg.cpp:443
#: ../src/richtext/richtextsymboldlg.cpp:445
msgid "The character code."
msgstr "De Letterteken code."

#: ../src/common/fontmap.cpp:203
#, c-format
msgid ""
"The charset '%s' is unknown. You may select\n"
"another charset to replace it with or choose\n"
"[Cancel] if it cannot be replaced"
msgstr ""
"De tekenset '%s' is onbekend. U kunt een andere\n"
"tekenset kiezen om te vervangen of kies [Annuleer]\n"
"als het niet vervangen kan worden"

#: ../src/msw/ole/dataobj.cpp:394
#, c-format
msgid "The clipboard format '%d' doesn't exist."
msgstr "Het klembord-formaat '%d' bestaat niet."

#: ../src/richtext/richtextstylepage.cpp:130
#: ../src/richtext/richtextstylepage.cpp:132
msgid "The default style for the next paragraph."
msgstr "De standaard stijl voor de volgende paragraaf."

#: ../src/generic/dirdlgg.cpp:202
#, c-format
msgid ""
"The directory '%s' does not exist\n"
"Create it now?"
msgstr ""
"De map '%s' bestaat niet\n"
"Nu maken?"

#: ../src/html/htmprint.cpp:271
#, c-format
msgid ""
"The document \"%s\" doesn't fit on the page horizontally and will be "
"truncated if printed.\n"
"\n"
"Would you like to proceed with printing it nevertheless?"
msgstr ""
"Het document \"%s\" past niet horizontaal op de pagina en zal worden "
"afgekapt bij het afdrukken.\n"
"\n"
"Wilt u ondanks dat toch doorgaan met afdrukken?"

#: ../src/common/docview.cpp:1202
#, c-format
msgid ""
"The file '%s' doesn't exist and couldn't be opened.\n"
"It has been removed from the most recently used files list."
msgstr ""
"Het bestand '%s' bestaat niet en kon niet geopend worden.\n"
"Het is verwijderd van de lijst 'recente bestanden'."

#: ../src/richtext/richtextindentspage.cpp:208
#: ../src/richtext/richtextindentspage.cpp:210
#: ../src/richtext/richtextliststylepage.cpp:394
#: ../src/richtext/richtextliststylepage.cpp:396
msgid "The first line indent."
msgstr "De eerste regel inspringing."

#: ../src/gtk/utilsgtk.cpp:481
msgid "The following standard GTK+ options are also supported:\n"
msgstr "De volgende standaard GTK+ opties worden ook ondersteund:\n"

#: ../src/generic/fontdlgg.cpp:414 ../src/generic/fontdlgg.cpp:416
msgid "The font colour."
msgstr "De lettertypekleur."

#: ../src/generic/fontdlgg.cpp:375 ../src/generic/fontdlgg.cpp:377
msgid "The font family."
msgstr "De lettertypefamilie"

#: ../src/richtext/richtextsymboldlg.cpp:405
#: ../src/richtext/richtextsymboldlg.cpp:407
msgid "The font from which to take the symbol."
msgstr "Het lettertype waar het symbool van wordt genomen."

#: ../src/generic/fontdlgg.cpp:427 ../src/generic/fontdlgg.cpp:429
#: ../src/generic/fontdlgg.cpp:434 ../src/generic/fontdlgg.cpp:436
msgid "The font point size."
msgstr "De lettertype puntgrootte."

#: ../src/osx/carbon/fontdlg.cpp:343 ../src/osx/carbon/fontdlg.cpp:345
msgid "The font size in points."
msgstr "De lettertypegrootte in punten."

#: ../src/richtext/richtextfontpage.cpp:181
#: ../src/richtext/richtextfontpage.cpp:183
msgid "The font size units, points or pixels."
msgstr "De lettertypegrootte in units, punten of pixels."

#: ../src/generic/fontdlgg.cpp:386 ../src/generic/fontdlgg.cpp:388
msgid "The font style."
msgstr "De lettertypestijl."

#: ../src/generic/fontdlgg.cpp:397 ../src/generic/fontdlgg.cpp:399
msgid "The font weight."
msgstr "De lettertypegewicht."

#: ../src/common/docview.cpp:1483
#, c-format
msgid "The format of file '%s' couldn't be determined."
msgstr "Het formaat van bestand '%s' kan niet worden bepaald."

#: ../src/richtext/richtextbackgroundpage.cpp:219
#: ../src/richtext/richtextbackgroundpage.cpp:221
msgid "The horizontal offset."
msgstr "De horizontale verschuiving."

#: ../src/richtext/richtextindentspage.cpp:199
#: ../src/richtext/richtextindentspage.cpp:201
#: ../src/richtext/richtextliststylepage.cpp:385
#: ../src/richtext/richtextliststylepage.cpp:387
msgid "The left indent."
msgstr "De Linkse inspringing."

#: ../src/richtext/richtextmarginspage.cpp:194
#: ../src/richtext/richtextmarginspage.cpp:196
msgid "The left margin size."
msgstr "De grootte van de linkermarge."

#: ../src/richtext/richtextmarginspage.cpp:308
#: ../src/richtext/richtextmarginspage.cpp:310
msgid "The left padding size."
msgstr "De grootte van de linker uitvulruimte."

#: ../src/richtext/richtextsizepage.cpp:534
#: ../src/richtext/richtextsizepage.cpp:536
#: ../src/richtext/richtextsizepage.cpp:548
#: ../src/richtext/richtextsizepage.cpp:550
msgid "The left position."
msgstr "De linkerpositie"

#: ../src/richtext/richtextindentspage.cpp:288
#: ../src/richtext/richtextindentspage.cpp:290
#: ../src/richtext/richtextliststylepage.cpp:462
#: ../src/richtext/richtextliststylepage.cpp:464
msgid "The line spacing."
msgstr "De regeltussenruimte."

#: ../src/richtext/richtextbulletspage.cpp:255
#: ../src/richtext/richtextbulletspage.cpp:257
msgid "The list item number."
msgstr "Het nummer van de elementenlijst."

#: ../src/msw/ole/automtn.cpp:664
msgid "The locale ID is unknown."
msgstr "De lokale ID is onbekend."

#: ../src/richtext/richtextsizepage.cpp:366
#: ../src/richtext/richtextsizepage.cpp:368
msgid "The object height."
msgstr "De hoogte van het object."

#: ../src/richtext/richtextsizepage.cpp:474
#: ../src/richtext/richtextsizepage.cpp:476
msgid "The object maximum height."
msgstr "De maximale hoogte van het object."

#: ../src/richtext/richtextsizepage.cpp:447
#: ../src/richtext/richtextsizepage.cpp:449
msgid "The object maximum width."
msgstr "De maximale breedte van het object."

#: ../src/richtext/richtextsizepage.cpp:420
#: ../src/richtext/richtextsizepage.cpp:422
msgid "The object minimum height."
msgstr "De minimale hoogte van het object."

#: ../src/richtext/richtextsizepage.cpp:393
#: ../src/richtext/richtextsizepage.cpp:395
msgid "The object minimum width."
msgstr "De minimale breedte van het object."

#: ../src/richtext/richtextsizepage.cpp:332
#: ../src/richtext/richtextsizepage.cpp:334
msgid "The object width."
msgstr "De breedte van het object."

#: ../src/richtext/richtextindentspage.cpp:227
#: ../src/richtext/richtextindentspage.cpp:229
msgid "The outline level."
msgstr "Het Outline niveau."

#: ../src/common/log.cpp:277
#, c-format
msgid "The previous message repeated %u time."
msgid_plural "The previous message repeated %u times."
msgstr[0] "Het vorige bericht  is %u keer herhaald."
msgstr[1] "Het vorige berichten zijn  %u keer herhaald."

#: ../src/common/log.cpp:270
msgid "The previous message repeated once."
msgstr "Het vorige bericht eenmaal herhaald."

#: ../src/richtext/richtextsymboldlg.cpp:462
#: ../src/richtext/richtextsymboldlg.cpp:464
msgid "The range to show."
msgstr "De te tonen range."

#: ../src/generic/dbgrptg.cpp:322
msgid ""
"The report contains the files listed below. If any of these files contain "
"private information,\n"
"please uncheck them and they will be removed from the report.\n"
msgstr ""
"Het rapport bevat de hieronder opgesomde bestanden. Wanneer een van deze "
"bestanden persoonlijke informatie bevat,\n"
"haal dan het vinkje weg en ze zullen verwijderd worden uit het rapport.\n"

#: ../src/common/cmdline.cpp:1254
#, c-format
msgid "The required parameter '%s' was not specified."
msgstr "De benodigde parameter '%s' was niet gespecificeerd."

#: ../src/richtext/richtextindentspage.cpp:217
#: ../src/richtext/richtextindentspage.cpp:219
#: ../src/richtext/richtextliststylepage.cpp:403
#: ../src/richtext/richtextliststylepage.cpp:405
msgid "The right indent."
msgstr "De rechts inspringing."

#: ../src/richtext/richtextmarginspage.cpp:219
#: ../src/richtext/richtextmarginspage.cpp:221
msgid "The right margin size."
msgstr "De grootte van de rechtermarge."

#: ../src/richtext/richtextmarginspage.cpp:333
#: ../src/richtext/richtextmarginspage.cpp:335
msgid "The right padding size."
msgstr "De grootte van de rechteruitvulruimte."

#: ../src/richtext/richtextsizepage.cpp:604
#: ../src/richtext/richtextsizepage.cpp:606
#: ../src/richtext/richtextsizepage.cpp:618
#: ../src/richtext/richtextsizepage.cpp:620
msgid "The right position."
msgstr "De rechterpositie."

#: ../src/richtext/richtextbackgroundpage.cpp:309
#: ../src/richtext/richtextbackgroundpage.cpp:311
msgid "The shadow blur distance."
msgstr "De vervagingsafstand van de schaduw."

#: ../src/richtext/richtextbackgroundpage.cpp:266
#: ../src/richtext/richtextbackgroundpage.cpp:268
msgid "The shadow colour."
msgstr "De schaduwkleur."

#: ../src/richtext/richtextbackgroundpage.cpp:336
#: ../src/richtext/richtextbackgroundpage.cpp:338
msgid "The shadow opacity."
msgstr "De schaduwondoorzichtigheid."

#: ../src/richtext/richtextbackgroundpage.cpp:282
#: ../src/richtext/richtextbackgroundpage.cpp:284
msgid "The shadow spread."
msgstr "De schaduwspreiding."

#: ../src/richtext/richtextindentspage.cpp:267
#: ../src/richtext/richtextliststylepage.cpp:439
#: ../src/richtext/richtextliststylepage.cpp:441
msgid "The spacing after the paragraph."
msgstr "De ruimte na de paragraaf."

#: ../src/richtext/richtextindentspage.cpp:257
#: ../src/richtext/richtextindentspage.cpp:259
#: ../src/richtext/richtextliststylepage.cpp:430
#: ../src/richtext/richtextliststylepage.cpp:432
msgid "The spacing before the paragraph."
msgstr "De tussenruimte voor de paragraaf."

#: ../src/richtext/richtextstylepage.cpp:110
#: ../src/richtext/richtextstylepage.cpp:112
msgid "The style name."
msgstr "De stijl naam."

#: ../src/richtext/richtextstylepage.cpp:120
#: ../src/richtext/richtextstylepage.cpp:122
msgid "The style on which this style is based."
msgstr "De stijl waarop deze stijl is gebaseerd."

#: ../src/richtext/richtextstyledlg.cpp:214
#: ../src/richtext/richtextstyledlg.cpp:216
msgid "The style preview."
msgstr "Afdrukvoorbeeld van de stijl."

#: ../src/msw/ole/automtn.cpp:680
msgid "The system cannot find the file specified."
msgstr "Het systeem kan het opgegeven bestand niet vinden."

#: ../src/richtext/richtexttabspage.cpp:114
#: ../src/richtext/richtexttabspage.cpp:116
msgid "The tab position."
msgstr "De tab positie."

#: ../src/richtext/richtexttabspage.cpp:120
msgid "The tab positions."
msgstr "De tab posities."

#: ../src/richtext/richtextctrl.cpp:3098
msgid "The text couldn't be saved."
msgstr "De tekst kon niet worden opgeslagen."

#: ../src/richtext/richtextmarginspage.cpp:242
#: ../src/richtext/richtextmarginspage.cpp:244
msgid "The top margin size."
msgstr "De grootte van de bovenmarge."

#: ../src/richtext/richtextmarginspage.cpp:356
#: ../src/richtext/richtextmarginspage.cpp:358
msgid "The top padding size."
msgstr "De grootte van de bovenuitvulruimte."

#: ../src/richtext/richtextsizepage.cpp:569
#: ../src/richtext/richtextsizepage.cpp:571
#: ../src/richtext/richtextsizepage.cpp:583
#: ../src/richtext/richtextsizepage.cpp:585
msgid "The top position."
msgstr "De bovenpositie."

#: ../src/common/cmdline.cpp:1232
#, c-format
msgid "The value for the option '%s' must be specified."
msgstr "De waarde voor de optie '%s' moet worden opgegeven/"

#: ../src/richtext/richtextborderspage.cpp:585
#: ../src/richtext/richtextborderspage.cpp:587
msgid "The value of the corner radius."
msgstr "Waarde van de hoek-straal."

#: ../src/msw/dialup.cpp:433
#, c-format
msgid ""
"The version of remote access service (RAS) installed on this machine is too "
"old, please upgrade (the following required function is missing: %s)."
msgstr ""
"De versie van de inbelverbindingsoftware (RAS) op deze machine is te oud. "
"Bijwerken naar nieuwere versie is aanbevolen (de volgende benodigde functie "
"ontbreekt: %s)."

#: ../src/richtext/richtextbackgroundpage.cpp:242
#: ../src/richtext/richtextbackgroundpage.cpp:244
msgid "The vertical offset."
msgstr "De verticale verschuiving."

#: ../src/richtext/richtextprint.cpp:619 ../src/html/htmprint.cpp:745
msgid ""
"There was a problem during page setup: you may need to set a default printer."
msgstr ""
"Er was een probleem tijdens pagina-instellingen: u moet mogelijk een "
"standaard printer instellen."

#: ../src/html/htmprint.cpp:255
msgid ""
"This document doesn't fit on the page horizontally and will be truncated "
"when it is printed."
msgstr ""
"Dit document pas horizontaal niet op de pagina en zal worden afgekapt als "
"het wordt afgedrukt."

#: ../src/common/image.cpp:2854
#, c-format
msgid "This is not a %s."
msgstr "dit is niet een %s."

#: ../src/common/wincmn.cpp:1653
msgid "This platform does not support background transparency."
msgstr "Dit platform ondersteunt  geen transparante achtergrond."

#: ../src/gtk/window.cpp:4660
msgid ""
"This program was compiled with a too old version of GTK+, please rebuild "
"with GTK+ 2.12 or newer."
msgstr ""
"Dit programma is gecompileerd met een te oude versie van GTK+. Herbouw het "
"met GTK+ 2.12 of nieuwer."

#: ../src/msw/thread.cpp:1240
msgid ""
"Thread module initialization failed: cannot store value in thread local "
"storage"
msgstr ""
"Threadmodule-initialisatie mislukt: kan geen waarde opslaan in lokale thread-"
"geheugenruimte."

#: ../src/unix/threadpsx.cpp:1794
msgid "Thread module initialization failed: failed to create thread key"
msgstr "Threadmodule-initialisatie mislukt: maken van thread-sleutel mislukt"

#: ../src/msw/thread.cpp:1228
msgid ""
"Thread module initialization failed: impossible to allocate index in thread "
"local storage"
msgstr ""
"Threadmodule-initialisatie mislukt: niet mogelijk een index te reserveren in "
"lokale thread-geheugenruimte."

#: ../src/unix/threadpsx.cpp:1043
msgid "Thread priority setting is ignored."
msgstr "Thread-prioriteitsinstelling is genegeerd."

#: ../src/msw/mdi.cpp:176
msgid "Tile &Horizontally"
msgstr "Onder elkaar"

#: ../src/msw/mdi.cpp:177
msgid "Tile &Vertically"
msgstr "Naast elkaar"

#: ../src/common/ftp.cpp:200
msgid "Timeout while waiting for FTP server to connect, try passive mode."
msgstr ""
"Time-out tijdens het wachten op FTP server verbinding: probeer de passieve "
"modus."

#: ../src/generic/tipdlg.cpp:201
msgid "Tip of the Day"
msgstr "Tip van de dag"

#: ../src/generic/tipdlg.cpp:140
msgid "Tips not available, sorry!"
msgstr "Geen tips beschikbaar, sorry!"

#: ../src/generic/prntdlgg.cpp:242
msgid "To:"
msgstr "Aan:"

#: ../src/richtext/richtextbuffer.cpp:8363
msgid "Too many EndStyle calls!"
msgstr "Te veel EindStijl aanroepen!"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:891
msgid "Tooltip"
msgstr "Tooltip"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:892
msgid "TooltipText"
msgstr "TooltipText"

#: ../src/generic/prntdlgg.cpp:881
msgid "Top margin (mm):"
msgstr "Bovenmarge (mm):"

#: ../src/generic/aboutdlgg.cpp:79
msgid "Translations by "
msgstr "Vertalingen door"

#: ../src/generic/aboutdlgg.cpp:188
msgid "Translators"
msgstr "Vertalers"

#. TRANSLATORS: Name of Boolean true value
#: ../src/propgrid/propgrid.cpp:211
msgid "True"
msgstr "Waar"

#: ../src/common/fs_mem.cpp:227
#, c-format
msgid "Trying to remove file '%s' from memory VFS, but it is not loaded!"
msgstr ""
"Bezig met poging om bestand '%s' uit geheugen VFS te verwijderen, maar het "
"is niet geladen!"

#: ../src/common/fmapbase.cpp:156
msgid "Turkish (ISO-8859-9)"
msgstr "Turks (ISO-8859-9)"

#: ../src/richtext/richtextfontpage.cpp:151
#: ../src/richtext/richtextfontpage.cpp:153
msgid "Type a font name."
msgstr "Typ een lettertype naam."

#: ../src/richtext/richtextfontpage.cpp:166
#: ../src/richtext/richtextfontpage.cpp:168
msgid "Type a size in points."
msgstr "Typ een grootte in punten."

#: ../src/msw/ole/automtn.cpp:676
#, c-format
msgid "Type mismatch in argument %u."
msgstr "Type komt niet overeen in argument %u."

#: ../src/common/xtixml.cpp:356 ../src/common/xtixml.cpp:509
#: ../src/common/xtistrm.cpp:318
msgid "Type must have enum - long conversion"
msgstr "Type moet enum hebben - long conversie."

#: ../src/propgrid/propgridiface.cpp:401
#, c-format
msgid ""
"Type operation \"%s\" failed: Property labeled \"%s\" is of type \"%s\", NOT "
"\"%s\"."
msgstr ""
"Type handeling \"%s\" mislukt: Eigenschap met label \"%s\" is van type \"%s"
"\", NIET \"%s\"."

#: ../src/common/paper.cpp:133
msgid "US Std Fanfold, 14 7/8 x 11 in"
msgstr "USA Std Fanfold, 14 7/8 x 11 inch"

#: ../src/common/fmapbase.cpp:196
msgid "US-ASCII"
msgstr "US-ASCII"

#: ../src/unix/fswatcher_inotify.cpp:109
msgid "Unable to add inotify watch"
msgstr "Kan geen inotify controle toevoegen"

#: ../src/unix/fswatcher_kqueue.cpp:136
msgid "Unable to add kqueue watch"
msgstr "Kan geen kqueue controle toevoegen"

#: ../include/wx/msw/private/fswatcher.h:142
msgid "Unable to associate handle with I/O completion port"
msgstr "Kan handle niet associëren met I/O voltooiingspoort"

#: ../include/wx/msw/private/fswatcher.h:125
msgid "Unable to close I/O completion port handle"
msgstr "Sluiten van I/O voltooiingspoort ingang niet mogelijk"

#: ../src/unix/fswatcher_inotify.cpp:97
msgid "Unable to close inotify instance"
msgstr "Sluiten van inotify exemplaarset niet mogelijk"

#: ../include/wx/unix/private/fswatcher_kqueue.h:74
#, c-format
msgid "Unable to close path '%s'"
msgstr "Sluiten van pad '%s' niet mogelijk"

#: ../include/wx/msw/private/fswatcher.h:48
#, c-format
msgid "Unable to close the handle for '%s'"
msgstr "Sluiten van de ingang voor '%s' niet mogelijk."

#: ../include/wx/msw/private/fswatcher.h:273
msgid "Unable to create I/O completion port"
msgstr "Niet mogelijk een I/O voltooiingspoort aan te maken"

#: ../src/msw/fswatcher.cpp:84
msgid "Unable to create IOCP worker thread"
msgstr "Niet mogelijk een IOCP WorklerThread aan te maken"

#: ../src/unix/fswatcher_inotify.cpp:74
msgid "Unable to create inotify instance"
msgstr "Niet mogelijk een inotify exemplaarset aan te maken"

#: ../src/unix/fswatcher_kqueue.cpp:97
msgid "Unable to create kqueue instance"
msgstr "Niet mogelijk een kqueue exemplaarset aan te maken"

#: ../include/wx/msw/private/fswatcher.h:262
msgid "Unable to dequeue completion packet"
msgstr "Kan voltooiingspakket niet uit de wachtrij halen "

#: ../src/unix/fswatcher_kqueue.cpp:185
msgid "Unable to get events from kqueue"
msgstr "Kan gebeurtenissen niet uit kqueue halen"

#: ../src/gtk/app.cpp:435
msgid "Unable to initialize GTK+, is DISPLAY set properly?"
msgstr "Niet in staat GTK+ te initialiseren. Is DISPLAY juist ingesteld?"

#: ../include/wx/unix/private/fswatcher_kqueue.h:57
#, c-format
msgid "Unable to open path '%s'"
msgstr "Niet mogelijk pad '%s' te openen"

#: ../src/html/htmlwin.cpp:583
#, c-format
msgid "Unable to open requested HTML document: %s"
msgstr "Kan gevraagd HTML-document niet openen: %s"

#: ../src/unix/sound.cpp:368
msgid "Unable to play sound asynchronously."
msgstr "Niet in staat geluid asynchroon af te spelen."

#: ../include/wx/msw/private/fswatcher.h:213
msgid "Unable to post completion status"
msgstr "Kan voltooiingstatus niet plaatsen"

#: ../src/unix/fswatcher_inotify.cpp:556
msgid "Unable to read from inotify descriptor"
msgstr "kan inotify descriptor niet lezen"

#: ../src/unix/fswatcher_inotify.cpp:141
#, fuzzy, c-format
msgid "Unable to remove inotify watch %i"
msgstr "Kan inotify controle niet verwijderen"

#: ../src/unix/fswatcher_kqueue.cpp:153
msgid "Unable to remove kqueue watch"
msgstr "Kan kqueue controle niet verwijderen"

#: ../src/msw/fswatcher.cpp:168
#, c-format
msgid "Unable to set up watch for '%s'"
msgstr "Kan controle op '%s' niet instellen"

#: ../src/msw/fswatcher.cpp:91
msgid "Unable to start IOCP worker thread"
msgstr "Kan IOCP WorkerThread niet opstarten"

#: ../src/common/stockitem.cpp:201
msgid "Undelete"
msgstr "terughalen"

#: ../src/common/stockitem.cpp:202
msgid "Underline"
msgstr "Onderstrepen"

#. TRANSLATORS: Label of underlined font
#: ../src/richtext/richtextfontpage.cpp:359 ../src/osx/carbon/fontdlg.cpp:370
#: ../src/propgrid/advprops.cpp:690
msgid "Underlined"
msgstr "onderstreept"

#: ../src/common/stockitem.cpp:265
msgid "Undo last action"
msgstr "Laatste actie ongedaan maken"

#: ../src/common/cmdline.cpp:1029
#, c-format
msgid "Unexpected characters following option '%s'."
msgstr "Onverwachte lettertekens na de optie '%s'."

#: ../src/unix/fswatcher_inotify.cpp:274
#, c-format
msgid "Unexpected event for \"%s\": no matching watch descriptor."
msgstr ""
"Onverwachte gebeurtenis voor \"%s\": geen overeenkomende watch descriptor."

#: ../src/common/cmdline.cpp:1195
#, c-format
msgid "Unexpected parameter '%s'"
msgstr "Onverwachte parameter '%s'"

#: ../include/wx/msw/private/fswatcher.h:148
msgid "Unexpectedly new I/O completion port was created"
msgstr "Er is onverwacht een nieuwe I/O voltooiingspoort aangemaakt"

#: ../src/msw/fswatcher.cpp:70
msgid "Ungraceful worker thread termination"
msgstr "Onbevallige WorkerThread beëindiging"

#: ../src/richtext/richtextsymboldlg.cpp:459
#: ../src/richtext/richtextsymboldlg.cpp:460
#: ../src/richtext/richtextsymboldlg.cpp:461
msgid "Unicode"
msgstr "Unicode"

#: ../src/common/fmapbase.cpp:185 ../src/common/fmapbase.cpp:191
msgid "Unicode 16 bit (UTF-16)"
msgstr "Unicode 16 bit (UTF-16)"

#: ../src/common/fmapbase.cpp:190
msgid "Unicode 16 bit Big Endian (UTF-16BE)"
msgstr "Unicode 16 bit Big Endian (UTF-16BE)"

#: ../src/common/fmapbase.cpp:186
msgid "Unicode 16 bit Little Endian (UTF-16LE)"
msgstr "Unicode 16 bit Little Endian (UTF-16LE)"

#: ../src/common/fmapbase.cpp:187 ../src/common/fmapbase.cpp:193
msgid "Unicode 32 bit (UTF-32)"
msgstr "Unicode 32 bit (UTF-32)"

#: ../src/common/fmapbase.cpp:192
msgid "Unicode 32 bit Big Endian (UTF-32BE)"
msgstr "Unicode 32 bit Big Endian (UTF-32BE)"

#: ../src/common/fmapbase.cpp:188
msgid "Unicode 32 bit Little Endian (UTF-32LE)"
msgstr "Unicode 32 bit Little Endian (UTF-32LE)"

#: ../src/common/fmapbase.cpp:182
msgid "Unicode 7 bit (UTF-7)"
msgstr "Unicode 7 bit (UTF-7)"

#: ../src/common/fmapbase.cpp:183
msgid "Unicode 8 bit (UTF-8)"
msgstr "Unicode 8 bit (UTF-8)"

#: ../src/common/stockitem.cpp:204
msgid "Unindent"
msgstr "Inspringing opheffen"

#: ../src/richtext/richtextborderspage.cpp:360
#: ../src/richtext/richtextborderspage.cpp:362
msgid "Units for the bottom border width."
msgstr "Eenheden voor de bodemrand breedte."

#: ../src/richtext/richtextmarginspage.cpp:277
#: ../src/richtext/richtextmarginspage.cpp:279
msgid "Units for the bottom margin."
msgstr "Eenheden voor de bodemmarge breedte."

#: ../src/richtext/richtextborderspage.cpp:528
#: ../src/richtext/richtextborderspage.cpp:530
msgid "Units for the bottom outline width."
msgstr "Eenheden voor de bodem outline breedte."

#: ../src/richtext/richtextmarginspage.cpp:391
#: ../src/richtext/richtextmarginspage.cpp:393
msgid "Units for the bottom padding."
msgstr "Eenheden voor de bodem uitvulbreedte."

#: ../src/richtext/richtextsizepage.cpp:664
#: ../src/richtext/richtextsizepage.cpp:666
msgid "Units for the bottom position."
msgstr "Eenheden voor de onderpositie."

#: ../src/richtext/richtextborderspage.cpp:596
#: ../src/richtext/richtextborderspage.cpp:598
msgid "Units for the corner radius."
msgstr "Eenheid van de hoek-straal."

#: ../src/richtext/richtextborderspage.cpp:258
#: ../src/richtext/richtextborderspage.cpp:260
msgid "Units for the left border width."
msgstr "Eenheden voor de linkerrand breedte."

#: ../src/richtext/richtextmarginspage.cpp:204
#: ../src/richtext/richtextmarginspage.cpp:206
msgid "Units for the left margin."
msgstr "Eenheden voor de linkermarge breedte."

#: ../src/richtext/richtextborderspage.cpp:426
#: ../src/richtext/richtextborderspage.cpp:428
msgid "Units for the left outline width."
msgstr "Eenheden voor de linker outline breedte."

#: ../src/richtext/richtextmarginspage.cpp:318
#: ../src/richtext/richtextmarginspage.cpp:320
msgid "Units for the left padding."
msgstr "Eenheden voor de linker uitvulbreedte."

#: ../src/richtext/richtextsizepage.cpp:559
#: ../src/richtext/richtextsizepage.cpp:561
msgid "Units for the left position."
msgstr "Eenheden voor de linkerpositie."

#: ../src/richtext/richtextsizepage.cpp:485
#: ../src/richtext/richtextsizepage.cpp:487
msgid "Units for the maximum object height."
msgstr "Eenheden voor de maximale object hoogte."

#: ../src/richtext/richtextsizepage.cpp:458
#: ../src/richtext/richtextsizepage.cpp:460
msgid "Units for the maximum object width."
msgstr "Eenheden voor de maximale object breedte."

#: ../src/richtext/richtextsizepage.cpp:431
#: ../src/richtext/richtextsizepage.cpp:433
msgid "Units for the minimum object height."
msgstr "Eenheden voor de minimale object hoogte."

#: ../src/richtext/richtextsizepage.cpp:404
#: ../src/richtext/richtextsizepage.cpp:406
msgid "Units for the minimum object width."
msgstr "Eenheden voor de minimale object breedte."

#: ../src/richtext/richtextsizepage.cpp:377
#: ../src/richtext/richtextsizepage.cpp:379
msgid "Units for the object height."
msgstr "Eenheden voor de objecthoogte."

#: ../src/richtext/richtextsizepage.cpp:343
#: ../src/richtext/richtextsizepage.cpp:345
msgid "Units for the object width."
msgstr "Eenheden voor de objectbreedte."

#: ../src/richtext/richtextborderspage.cpp:292
#: ../src/richtext/richtextborderspage.cpp:294
msgid "Units for the right border width."
msgstr "Eenheden voor de rechter randbreedte."

#: ../src/richtext/richtextmarginspage.cpp:229
#: ../src/richtext/richtextmarginspage.cpp:231
msgid "Units for the right margin."
msgstr "Eenheden voor de rechter marge breedte."

#: ../src/richtext/richtextborderspage.cpp:460
#: ../src/richtext/richtextborderspage.cpp:462
msgid "Units for the right outline width."
msgstr "Eenheden voor de rechter outline breedte."

#: ../src/richtext/richtextmarginspage.cpp:343
#: ../src/richtext/richtextmarginspage.cpp:345
msgid "Units for the right padding."
msgstr "Eenheden voor de rechter uitvulbreedte."

#: ../src/richtext/richtextsizepage.cpp:629
#: ../src/richtext/richtextsizepage.cpp:631
msgid "Units for the right position."
msgstr "Eenheden voor de rechterpositie."

#: ../src/richtext/richtextborderspage.cpp:326
#: ../src/richtext/richtextborderspage.cpp:328
msgid "Units for the top border width."
msgstr "Eenheden voor de bovenrand breedte."

#: ../src/richtext/richtextmarginspage.cpp:252
#: ../src/richtext/richtextmarginspage.cpp:254
msgid "Units for the top margin."
msgstr "Eenheden voor de bovenmarge."

#: ../src/richtext/richtextborderspage.cpp:494
#: ../src/richtext/richtextborderspage.cpp:496
msgid "Units for the top outline width."
msgstr "Eenheden voor de boven outline breedte."

#: ../src/richtext/richtextmarginspage.cpp:366
#: ../src/richtext/richtextmarginspage.cpp:368
msgid "Units for the top padding."
msgstr "Eenheden voor de boven uitvulbreedte."

#: ../src/richtext/richtextsizepage.cpp:594
#: ../src/richtext/richtextsizepage.cpp:596
msgid "Units for the top position."
msgstr "Eenheden voor de bovenpositie."

#: ../src/richtext/richtextbackgroundpage.cpp:230
#: ../src/richtext/richtextbackgroundpage.cpp:232
#: ../src/richtext/richtextbackgroundpage.cpp:253
#: ../src/richtext/richtextbackgroundpage.cpp:255
#: ../src/richtext/richtextbackgroundpage.cpp:293
#: ../src/richtext/richtextbackgroundpage.cpp:295
#: ../src/richtext/richtextbackgroundpage.cpp:320
#: ../src/richtext/richtextbackgroundpage.cpp:322
msgid "Units for this value."
msgstr "eenheden voor deze waarde."

#: ../src/msw/dde.cpp:1174
#, c-format
msgid "Unknown DDE error %08x"
msgstr "Onbekende DDE-fout %08x"

#: ../src/common/xtistrm.cpp:410
msgid "Unknown Object passed to GetObjectClassInfo"
msgstr "Onbekend  Object doorgegeven aan GetObjectClassInfo"

#: ../src/common/imagpng.cpp:366
#, c-format
msgid "Unknown PNG resolution unit %d"
msgstr "Onbekende PNG resolutie eenheid %d"

#: ../src/common/xtixml.cpp:327
#, c-format
msgid "Unknown Property %s"
msgstr "Onbekende Eigenschap %s"

#: ../src/common/imagtiff.cpp:529
#, c-format
msgid "Unknown TIFF resolution unit %d ignored"
msgstr "Onbekende TIFF resolutie eenheid%d genegeerd"

#: ../src/unix/dlunix.cpp:160
msgid "Unknown dynamic library error"
msgstr "Onbekende dynamische bibliotheek fout"

#: ../src/common/fmapbase.cpp:810
#, c-format
msgid "Unknown encoding (%d)"
msgstr "Onbekende codering (%d)"

#: ../src/msw/ole/automtn.cpp:688
#, c-format
msgid "Unknown error %08x"
msgstr "Onbekende fout %08x"

#: ../src/msw/ole/automtn.cpp:647
msgid "Unknown exception"
msgstr "Onbekende uitzondering"

#: ../src/common/image.cpp:2839
msgid "Unknown image data format."
msgstr "Onbekende afbeelding gegevensformaat"

#: ../src/common/cmdline.cpp:914
#, c-format
msgid "Unknown long option '%s'"
msgstr "Onbekende lange optie '%s'"

#: ../src/msw/ole/automtn.cpp:631
msgid "Unknown name or named argument."
msgstr "Onbekende naam of benoemd argument."

#: ../src/common/cmdline.cpp:929 ../src/common/cmdline.cpp:951
#, c-format
msgid "Unknown option '%s'"
msgstr "Onbekende optie '%s'"

#: ../src/common/mimecmn.cpp:225
#, c-format
msgid "Unmatched '{' in an entry for mime type %s."
msgstr "Niet afgesloten '{' in ingang voor mime-type %s."

#: ../src/common/cmdproc.cpp:262 ../src/common/cmdproc.cpp:288
#: ../src/common/cmdproc.cpp:308
msgid "Unnamed command"
msgstr "Naamloze opdracht"

#. TRANSLATORS: Text  displayed for unspecified value
#: ../src/propgrid/propgrid.cpp:413
msgid "Unspecified"
msgstr "Ongespecifieerd"

#: ../src/msw/clipbrd.cpp:311
msgid "Unsupported clipboard format."
msgstr "Niet ondersteund klembord-formaat."

#: ../src/common/appcmn.cpp:256
#, c-format
msgid "Unsupported theme '%s'."
msgstr "Niet ondersteund thema '%s'."

#. TRANSLATORS: Name of keyboard key
#: ../src/generic/fdrepdlg.cpp:152 ../src/common/stockitem.cpp:205
#: ../src/common/accelcmn.cpp:63
msgid "Up"
msgstr "Omhoog"

#: ../src/richtext/richtextliststylepage.cpp:483
#: ../src/richtext/richtextbulletspage.cpp:275
msgid "Upper case letters"
msgstr "Hoofdletters"

#: ../src/richtext/richtextliststylepage.cpp:485
#: ../src/richtext/richtextbulletspage.cpp:277
msgid "Upper case roman numerals"
msgstr "Kapitale Romeinse cijfers"

#: ../src/common/cmdline.cpp:1326
#, c-format
msgid "Usage: %s"
msgstr "Gebruik: %s"

#: ../src/richtext/richtextbackgroundpage.cpp:194
msgid "Use &shadow"
msgstr "Gebruik &schaduw"

#: ../src/richtext/richtextindentspage.cpp:169
#: ../src/richtext/richtextindentspage.cpp:171
#: ../src/richtext/richtextliststylepage.cpp:358
#: ../src/richtext/richtextliststylepage.cpp:360
msgid "Use the current alignment setting."
msgstr "Gebruik de actuele uitlijningsinstelling."

#: ../src/common/valtext.cpp:179
msgid "Validation conflict"
msgstr "Validatie-conflict"

#: ../src/propgrid/props.cpp:386 ../src/propgrid/props.cpp:500
#, c-format
msgid "Value must be %s or higher."
msgstr "Waarde moet %s zijn of meer."

#: ../src/propgrid/props.cpp:417 ../src/propgrid/props.cpp:531
#, c-format
msgid "Value must be %s or less."
msgstr "Waarde moet %s zijn of minder."

#: ../src/propgrid/props.cpp:393 ../src/propgrid/props.cpp:424
#: ../src/propgrid/props.cpp:507 ../src/propgrid/props.cpp:538
#, c-format
msgid "Value must be between %s and %s."
msgstr "Waarde moet tussen %s en %s liggen."

#: ../src/generic/aboutdlgg.cpp:128
msgid "Version "
msgstr "Versie"

#: ../src/richtext/richtextsizepage.cpp:291
#: ../src/richtext/richtextsizepage.cpp:293
msgid "Vertical alignment."
msgstr "Vertikale uitlijning."

#: ../src/generic/filedlgg.cpp:202
msgid "View files as a detailed view"
msgstr "Toon bestanden in detail-weergave"

#: ../src/generic/filedlgg.cpp:200
msgid "View files as a list view"
msgstr "Toon bestanden in lijst-weergave"

#: ../src/common/docview.cpp:1970
msgid "Views"
msgstr "Weergaven"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1777
msgid "Wait"
msgstr "Wacht"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1779
msgid "Wait Arrow"
msgstr "Wacht pijl"

#: ../src/unix/epolldispatcher.cpp:213
#, c-format
msgid "Waiting for IO on epoll descriptor %d failed"
msgstr "Het wachten op IO voor epoll beschrijver %d mislukte"

#: ../src/common/log.cpp:223
msgid "Warning: "
msgstr "Waarschuwing: "

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1778
msgid "Watch"
msgstr "Bekijk"

#. TRANSLATORS: Label of font weight
#: ../src/propgrid/advprops.cpp:685
msgid "Weight"
msgstr "Gewicht"

#: ../src/common/fmapbase.cpp:148
msgid "Western European (ISO-8859-1)"
msgstr "West-Europees (ISO-8859-1)"

#: ../src/common/fmapbase.cpp:162
msgid "Western European with Euro (ISO-8859-15)"
msgstr "West-Europees met Euro teken (ISO-8859-15)"

#: ../src/generic/fontdlgg.cpp:446 ../src/generic/fontdlgg.cpp:448
msgid "Whether the font is underlined."
msgstr "Of het lettertype is onderstreept."

#: ../src/propgrid/advprops.cpp:1611
msgid "White"
msgstr "Wit"

#: ../src/html/helpwnd.cpp:534
msgid "Whole words only"
msgstr "Alleen hele woorden"

#: ../src/univ/themes/win32.cpp:1102
msgid "Win32 theme"
msgstr "Win32 thema"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:893
msgid "Window"
msgstr "Venster"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:894
msgid "WindowFrame"
msgstr "WindowFrame"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:895
msgid "WindowText"
msgstr "WindowText"

#: ../src/common/fmapbase.cpp:177
msgid "Windows Arabic (CP 1256)"
msgstr "Windows Arabisch (CP 1256)"

#: ../src/common/fmapbase.cpp:178
msgid "Windows Baltic (CP 1257)"
msgstr "Windows Baltisch (CP 1257)"

#: ../src/common/fmapbase.cpp:171
msgid "Windows Central European (CP 1250)"
msgstr "Windows Centraal Europees (CP 1250)"

#: ../src/common/fmapbase.cpp:168
msgid "Windows Chinese Simplified (CP 936) or GB-2312"
msgstr "Windows Chinees Gesimplificeerd (CP 936) of GB-2312"

#: ../src/common/fmapbase.cpp:170
msgid "Windows Chinese Traditional (CP 950) or Big-5"
msgstr "Windows Traditioneel Chinees (CP 950) of Big-5"

#: ../src/common/fmapbase.cpp:172
msgid "Windows Cyrillic (CP 1251)"
msgstr "Windows Cyrillisch (CP 1251)"

#: ../src/common/fmapbase.cpp:174
msgid "Windows Greek (CP 1253)"
msgstr "Windows Grieks (CP 1253)"

#: ../src/common/fmapbase.cpp:176
msgid "Windows Hebrew (CP 1255)"
msgstr "Windows Hebreeuws (CP 1255)"

#: ../src/common/fmapbase.cpp:167
msgid "Windows Japanese (CP 932) or Shift-JIS"
msgstr "Windows Japans (CP 932) of Shift-JIS"

#: ../src/common/fmapbase.cpp:180
msgid "Windows Johab (CP 1361)"
msgstr "Windows Johab (CP 1361)"

#: ../src/common/fmapbase.cpp:169
msgid "Windows Korean (CP 949)"
msgstr "Windows Koreaans (CP 949)"

#: ../src/common/fmapbase.cpp:166
msgid "Windows Thai (CP 874)"
msgstr "Windows Thai (CP 874)"

#: ../src/common/fmapbase.cpp:175
msgid "Windows Turkish (CP 1254)"
msgstr "Windows Turks (CP 1254)"

#: ../src/common/fmapbase.cpp:179
msgid "Windows Vietnamese (CP 1258)"
msgstr "Windows Vietnamees (CP 1258)"

#: ../src/common/fmapbase.cpp:173
msgid "Windows Western European (CP 1252)"
msgstr "Windows West Europees (CP 1252)"

#: ../src/common/fmapbase.cpp:181
msgid "Windows/DOS OEM (CP 437)"
msgstr "Windows/DOS OEM (CP 437)"

#: ../src/common/fmapbase.cpp:165
msgid "Windows/DOS OEM Cyrillic (CP 866)"
msgstr "Windows/DOS OEM Cyrillic (CP 866)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:111
msgid "Windows_Left"
msgstr "Windows_Left"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:113
msgid "Windows_Menu"
msgstr "Windows_Menu"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:112
msgid "Windows_Right"
msgstr "Windows_Right"

#: ../src/common/ffile.cpp:150
#, c-format
msgid "Write error on file '%s'"
msgstr "Schrijffout bij bestand '%s'"

#: ../src/xml/xml.cpp:914
#, c-format
msgid "XML parsing error: '%s' at line %d"
msgstr "XML ontleed fout: '%s' in lijn %d"

#: ../src/common/xpmdecod.cpp:796
msgid "XPM: Malformed pixel data!"
msgstr "XPM: Misvormde pixel gegevens!"

#: ../src/common/xpmdecod.cpp:705
#, c-format
msgid "XPM: incorrect colour description in line %d"
msgstr "XPM: incorrecte kleurbeschrijving in regel %d"

#: ../src/common/xpmdecod.cpp:680
msgid "XPM: incorrect header format!"
msgstr "XPM: incorrecte header formaat!"

#: ../src/common/xpmdecod.cpp:716 ../src/common/xpmdecod.cpp:725
#, c-format
msgid "XPM: malformed colour definition '%s' at line %d!"
msgstr "XPM: misvormde kleur definitie '%s' op regel %d!"

#: ../src/common/xpmdecod.cpp:755
msgid "XPM: no colors left to use for mask!"
msgstr "XPM: geen kleuren over voor maskering!"

#: ../src/common/xpmdecod.cpp:782
#, c-format
msgid "XPM: truncated image data at line %d!"
msgstr "XPM: afgeknotte afbeeldingsgegevens op regel %d!"

#: ../src/propgrid/advprops.cpp:1610
msgid "Yellow"
msgstr "Geel"

#: ../include/wx/msgdlg.h:276 ../src/common/stockitem.cpp:206
#: ../src/motif/msgdlg.cpp:196
msgid "Yes"
msgstr "Ja"

#: ../src/osx/carbon/overlay.cpp:155
msgid "You cannot Clear an overlay that is not inited"
msgstr "U kunt geen overlay wissen die niet is geïnitieerd"

#: ../src/osx/carbon/overlay.cpp:107 ../src/dfb/overlay.cpp:61
msgid "You cannot Init an overlay twice"
msgstr "U kunt niet een overlay twee keer initiëren"

#: ../src/generic/dirdlgg.cpp:287
msgid "You cannot add a new directory to this section."
msgstr "U kunt geen nieuwe map aan deze sectie toevoegen."

#: ../src/propgrid/propgrid.cpp:3299
msgid "You have entered invalid value. Press ESC to cancel editing."
msgstr ""
"U heeft een ongeldige waarde ingevoerd. Druk op Esc om de bewerking te "
"annuleren."

#: ../src/common/stockitem.cpp:209
msgid "Zoom &In"
msgstr "In&zoomen"

#: ../src/common/stockitem.cpp:210
msgid "Zoom &Out"
msgstr "&Uitzoomen"

#: ../src/common/stockitem.cpp:209 ../src/common/prntbase.cpp:1594
msgid "Zoom In"
msgstr "Inzoomen"

#: ../src/common/stockitem.cpp:210 ../src/common/prntbase.cpp:1580
msgid "Zoom Out"
msgstr "Uitzoomen"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to &Fit"
msgstr "Inzoomen tot &Passend"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to Fit"
msgstr "Inzoomen tot Passend"

#: ../src/msw/dde.cpp:1141
msgid "a DDEML application has created a prolonged race condition."
msgstr ""
"een DDEML-applicatie heeft door een 'race'-conditie geheugengebrek "
"veroorzaakt."

#: ../src/msw/dde.cpp:1129
msgid ""
"a DDEML function was called without first calling the DdeInitialize "
"function,\n"
"or an invalid instance identifier\n"
"was passed to a DDEML function."
msgstr ""
"een DDEML-functie was aangeroepen zonder eerst de DdeInitialize-functie aan "
"te roepen\n"
"of een ongeldige applicatie-pid was doorgegeven aan een DDEML-functie."

#: ../src/msw/dde.cpp:1147
msgid "a client's attempt to establish a conversation has failed."
msgstr "een poging van een cliënt om een conversatie op te zetten is mislukt."

#: ../src/msw/dde.cpp:1144
msgid "a memory allocation failed."
msgstr "een geheugenreservering is mislukt."

#: ../src/msw/dde.cpp:1138
msgid "a parameter failed to be validated by the DDEML."
msgstr "een parameter kon niet door de DDEML gevalideerd worden."

#: ../src/msw/dde.cpp:1120
msgid "a request for a synchronous advise transaction has timed out."
msgstr ""
"aanvraag voor synchrone adviestransactie heeft een time-out veroorzaakt."

#: ../src/msw/dde.cpp:1126
msgid "a request for a synchronous data transaction has timed out."
msgstr ""
"aanvraag voor synchrone gegevenstransactie heeft een time-out veroorzaakt."

#: ../src/msw/dde.cpp:1135
msgid "a request for a synchronous execute transaction has timed out."
msgstr ""
"aanvraag voor synchrone uitvoeringstransactie heeft een time-out veroorzaakt."

#: ../src/msw/dde.cpp:1153
msgid "a request for a synchronous poke transaction has timed out."
msgstr ""
"aanvraag voor synchrone 'poke' transactie heeft een time-out veroorzaakt."

#: ../src/msw/dde.cpp:1168
msgid "a request to end an advise transaction has timed out."
msgstr ""
"aanvraag voor beëindigen  van adviestransactie heeft een time-out "
"veroorzaakt."

#: ../src/msw/dde.cpp:1162
msgid ""
"a server-side transaction was attempted on a conversation\n"
"that was terminated by the client, or the server\n"
"terminated before completing a transaction."
msgstr ""
"vanaf de server werd een transactie geprobeerd op een conversatie\n"
"die door de cliënt was beëindigd of de server heeft afgebroken\n"
"voordat de transactie was afgerond."

#: ../src/msw/dde.cpp:1150
msgid "a transaction failed."
msgstr "een transactie is mislukt."

#: ../src/common/accelcmn.cpp:189
msgid "alt"
msgstr "alt"

#: ../src/msw/dde.cpp:1132
msgid ""
"an application initialized as APPCLASS_MONITOR has\n"
"attempted to perform a DDE transaction,\n"
"or an application initialized as APPCMD_CLIENTONLY has \n"
"attempted to perform server transactions."
msgstr ""
"een applicatie die als APPCLASS_MONITOR is gestart heeft geprobeerd\n"
"een DDE-transactie uit te voeren of een applicatie die als APPCMD_CLIENTONLY "
"is\n"
"gestart heeft geprobeerd een server-transactie uit te voeren."

#: ../src/msw/dde.cpp:1156
msgid "an internal call to the PostMessage function has failed. "
msgstr "een interne oproep van de PostMessage-functie is mislukt."

#: ../src/msw/dde.cpp:1165
msgid "an internal error has occurred in the DDEML."
msgstr "een interne fout is opgetreden in de DDEML."

#: ../src/msw/dde.cpp:1171
msgid ""
"an invalid transaction identifier was passed to a DDEML function.\n"
"Once the application has returned from an XTYP_XACT_COMPLETE callback,\n"
"the transaction identifier for that callback is no longer valid."
msgstr ""
"een ongeldige transactie-id werd doorgegeven aan een DDEML-functie.\n"
"Als de applicatie verdergaat na een XTYP_XACT_COMPLETE-callback dan is\n"
"de transactie-id voor die callback niet meer geldig."

#: ../src/common/zipstrm.cpp:1483
msgid "assuming this is a multi-part zip concatenated"
msgstr "Aangenomen dat dit een multi-part zip concatenatie is"

#: ../src/common/fileconf.cpp:1847
#, c-format
msgid "attempt to change immutable key '%s' ignored."
msgstr "poging tot wijzigen van onveranderbare sleutel '%s' genegeerd."

#: ../src/html/chm.cpp:329
msgid "bad arguments to library function"
msgstr "Foute argumenten voor bibliotheek functie"

#: ../src/html/chm.cpp:341
msgid "bad signature"
msgstr "slechte handtekening"

#: ../src/common/zipstrm.cpp:1918
msgid "bad zipfile offset to entry"
msgstr "Foute zipbestand offset voor invoer"

#: ../src/common/ftp.cpp:403
msgid "binary"
msgstr "binair"

#: ../src/common/fontcmn.cpp:996
msgid "bold"
msgstr "vet"

#: ../src/msw/utils.cpp:1144
#, c-format
msgid "build %lu"
msgstr "build %lu"

#: ../src/common/ffile.cpp:75
#, c-format
msgid "can't close file '%s'"
msgstr "kan bestand '%s' niet sluiten"

#: ../src/common/file.cpp:245
#, c-format
msgid "can't close file descriptor %d"
msgstr "kan bestandsbeschrijving %d niet sluiten"

#: ../src/common/file.cpp:586
#, c-format
msgid "can't commit changes to file '%s'"
msgstr "kan verandering niet doorvoeren in bestand '%s'"

#: ../src/common/file.cpp:178
#, c-format
msgid "can't create file '%s'"
msgstr "kan bestand '%s' niet maken"

#: ../src/common/fileconf.cpp:1141
#, c-format
msgid "can't delete user configuration file '%s'"
msgstr "kan bestand met gebruikersinstellingen '%s' niet wissen"

#: ../src/common/file.cpp:495
#, c-format
msgid "can't determine if the end of file is reached on descriptor %d"
msgstr ""
"kan niet bepalen of bestandseinde is bereikt bij bestandsbeschrijving %d"

#: ../src/common/zipstrm.cpp:1692
msgid "can't find central directory in zip"
msgstr "kan centrale map in zipbestand niet vinden"

#: ../src/common/file.cpp:465
#, c-format
msgid "can't find length of file on file descriptor %d"
msgstr "kan bestandslengte niet vinden bij bestandsbeschrijving %d"

#: ../src/msw/utils.cpp:341
msgid "can't find user's HOME, using current directory."
msgstr "kan gebruikers startlocatie niet vinden, gebruik huidige map."

#: ../src/common/file.cpp:366
#, c-format
msgid "can't flush file descriptor %d"
msgstr "kan bestandsbeschrijving %d niet legen"

#: ../src/common/file.cpp:422
#, c-format
msgid "can't get seek position on file descriptor %d"
msgstr "kan zoekpositie niet verkrijgen bij bestandsbeschrijving %d"

#: ../src/common/fontmap.cpp:325
msgid "can't load any font, aborting"
msgstr "kan geen lettertype laden, wordt afgebroken"

#: ../src/common/file.cpp:231 ../src/common/ffile.cpp:59
#, c-format
msgid "can't open file '%s'"
msgstr "kan bestand '%s' niet openen"

#: ../src/common/fileconf.cpp:320
#, c-format
msgid "can't open global configuration file '%s'."
msgstr "kan globaal configuratiebestand '%s' niet openen."

#: ../src/common/fileconf.cpp:336
#, c-format
msgid "can't open user configuration file '%s'."
msgstr "kan gebruikers-configuratiebestand '%s' niet openen."

#: ../src/common/fileconf.cpp:986
msgid "can't open user configuration file."
msgstr "kan gebruikers-configuratiebestand niet openen."

#: ../src/common/zipstrm.cpp:579
msgid "can't re-initialize zlib deflate stream"
msgstr "kan zlib deflate stream niet opnieuw starten"

#: ../src/common/zipstrm.cpp:604
msgid "can't re-initialize zlib inflate stream"
msgstr "kan zlib inflate stream niet opnieuw starten"

#: ../src/common/file.cpp:304
#, c-format
msgid "can't read from file descriptor %d"
msgstr "kan niet lezen van bestandsbeschrijving %d"

#: ../src/common/file.cpp:581
#, c-format
msgid "can't remove file '%s'"
msgstr "kan bestand '%s' niet verwijderen"

#: ../src/common/file.cpp:598
#, c-format
msgid "can't remove temporary file '%s'"
msgstr "kan tijdelijk bestand '%s' niet verwijderen"

#: ../src/common/file.cpp:408
#, c-format
msgid "can't seek on file descriptor %d"
msgstr "kan niet zoeken bij bestandsbeschrijving %d"

#: ../src/common/textfile.cpp:273
#, c-format
msgid "can't write buffer '%s' to disk."
msgstr "kan buffer '%s' niet naar schijf schrijven."

#: ../src/common/file.cpp:323
#, c-format
msgid "can't write to file descriptor %d"
msgstr "kan niet schrijven naar bestandsbeschrijving %d"

#: ../src/common/fileconf.cpp:1000
msgid "can't write user configuration file."
msgstr "kan gebruikers-configuratiebestand niet schrijven."

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:482 ../src/generic/datavgen.cpp:1261
msgid "checked"
msgstr ""

#: ../src/html/chm.cpp:345
msgid "checksum error"
msgstr "checksum fout"

#: ../src/common/tarstrm.cpp:820
msgid "checksum failure reading tar header block"
msgstr "checksum mislukt tijdens lezen tar header blok"

#: ../src/richtext/richtextbackgroundpage.cpp:226
#: ../src/richtext/richtextbackgroundpage.cpp:249
#: ../src/richtext/richtextbackgroundpage.cpp:289
#: ../src/richtext/richtextbackgroundpage.cpp:316
#: ../src/richtext/richtextborderspage.cpp:254
#: ../src/richtext/richtextborderspage.cpp:288
#: ../src/richtext/richtextborderspage.cpp:322
#: ../src/richtext/richtextborderspage.cpp:356
#: ../src/richtext/richtextborderspage.cpp:422
#: ../src/richtext/richtextborderspage.cpp:456
#: ../src/richtext/richtextborderspage.cpp:490
#: ../src/richtext/richtextborderspage.cpp:524
#: ../src/richtext/richtextborderspage.cpp:592
#: ../src/richtext/richtextmarginspage.cpp:201
#: ../src/richtext/richtextmarginspage.cpp:226
#: ../src/richtext/richtextmarginspage.cpp:249
#: ../src/richtext/richtextmarginspage.cpp:274
#: ../src/richtext/richtextmarginspage.cpp:315
#: ../src/richtext/richtextmarginspage.cpp:340
#: ../src/richtext/richtextmarginspage.cpp:363
#: ../src/richtext/richtextmarginspage.cpp:388
#: ../src/richtext/richtextsizepage.cpp:339
#: ../src/richtext/richtextsizepage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:400
#: ../src/richtext/richtextsizepage.cpp:427
#: ../src/richtext/richtextsizepage.cpp:454
#: ../src/richtext/richtextsizepage.cpp:481
#: ../src/richtext/richtextsizepage.cpp:555
#: ../src/richtext/richtextsizepage.cpp:590
#: ../src/richtext/richtextsizepage.cpp:625
#: ../src/richtext/richtextsizepage.cpp:660
msgid "cm"
msgstr "cm"

#: ../src/html/chm.cpp:347
msgid "compression error"
msgstr "compressie fout"

#: ../src/common/regex.cpp:236
msgid "conversion to 8-bit encoding failed"
msgstr "conversie naar 8-bit versleuteling mislukt"

#: ../src/common/accelcmn.cpp:187
msgid "ctrl"
msgstr "ctrl"

#: ../src/common/cmdline.cpp:1500
msgid "date"
msgstr "datum"

#: ../src/html/chm.cpp:349
msgid "decompression error"
msgstr "decompressie fout"

#: ../src/common/cmdline.cpp:1496
msgid "double"
msgstr "dubbel"

#: ../src/common/debugrpt.cpp:538
msgid "dump of the process state (binary)"
msgstr "dump van de proces status (binair)"

#: ../src/common/datetimefmt.cpp:1969
msgid "eighteenth"
msgstr "achttiende"

#: ../src/common/datetimefmt.cpp:1959
msgid "eighth"
msgstr "achtste"

#: ../src/common/datetimefmt.cpp:1962
msgid "eleventh"
msgstr "elfde"

#: ../src/common/fileconf.cpp:1833
#, c-format
msgid "entry '%s' appears more than once in group '%s'"
msgstr "ingang '%s' komt meer dan één keer voor in groep '%s'"

#: ../src/html/chm.cpp:343
msgid "error in data format"
msgstr "fout in gegevens formaat"

#: ../src/html/chm.cpp:331
msgid "error opening file"
msgstr "fout bij openen bestand"

#: ../src/common/zipstrm.cpp:1778
msgid "error reading zip central directory"
msgstr "fout bij het lezen van zip centrale map"

#: ../src/common/zipstrm.cpp:1870
msgid "error reading zip local header"
msgstr "Fout bij lezen lokale header."

#: ../src/common/zipstrm.cpp:2531
#, c-format
msgid "error writing zip entry '%s': bad crc or length"
msgstr "fout schrijven zip invoer '%s': foute crc of lengte"

#: ../src/common/ffile.cpp:188
#, c-format
msgid "failed to flush the file '%s'"
msgstr "legen van bestand '%s' mislukt"

#. TRANSLATORS: Name of Boolean false value
#: ../src/generic/datavgen.cpp:1030
#, fuzzy
msgid "false"
msgstr "Onwaar"

#: ../src/common/datetimefmt.cpp:1966
msgid "fifteenth"
msgstr "vijftiende"

#: ../src/common/datetimefmt.cpp:1956
msgid "fifth"
msgstr "vijfde"

#: ../src/common/fileconf.cpp:579
#, fuzzy, c-format
msgid "file '%s', line %zu: '%s' ignored after group header."
msgstr "bestand '%s', regel %d: '%s' genegeerd na groepsheader."

#: ../src/common/fileconf.cpp:608
#, fuzzy, c-format
msgid "file '%s', line %zu: '=' expected."
msgstr "bestand '%s', regel %d: '=' verwacht."

#: ../src/common/fileconf.cpp:631
#, fuzzy, c-format
msgid "file '%s', line %zu: key '%s' was first found at line %d."
msgstr ""
"bestand '%s', regel %d: sleutel '%s' voor het eerst gevonden op regel %d."

#: ../src/common/fileconf.cpp:621
#, fuzzy, c-format
msgid "file '%s', line %zu: value for immutable key '%s' ignored."
msgstr ""
"bestand '%s', regel %d: waarde voor onveranderbare sleutel '%s' genegeerd."

#: ../src/common/fileconf.cpp:543
#, fuzzy, c-format
msgid "file '%s': unexpected character %c at line %zu."
msgstr "bestand '%s': onverwacht letterteken %c in regel %d."

#: ../src/richtext/richtextbuffer.cpp:8738
msgid "files"
msgstr "bestanden"

#: ../src/common/datetimefmt.cpp:1952
msgid "first"
msgstr "eerste"

#: ../src/html/helpwnd.cpp:1252
msgid "font size"
msgstr "Lettertype grootte"

#: ../src/common/datetimefmt.cpp:1965
msgid "fourteenth"
msgstr "veertiende"

#: ../src/common/datetimefmt.cpp:1955
msgid "fourth"
msgstr "vierde"

#: ../src/common/appbase.cpp:783
msgid "generate verbose log messages"
msgstr "genereer uitgebreide log meldingen"

#: ../src/richtext/richtextbuffer.cpp:13138
#: ../src/richtext/richtextbuffer.cpp:13248
msgid "image"
msgstr "afbeelding"

#: ../src/common/tarstrm.cpp:796
msgid "incomplete header block in tar"
msgstr "onvolledige header blok in tar"

#: ../src/common/xtixml.cpp:489
msgid "incorrect event handler string, missing dot"
msgstr "onjuiste gebeurtenis handler string, punt mist "

#: ../src/common/tarstrm.cpp:1381
msgid "incorrect size given for tar entry"
msgstr "onjuiste grootte aangegeven voor tar invoer"

#: ../src/common/tarstrm.cpp:993
msgid "invalid data in extended tar header"
msgstr "ongeldige data in extended tar header"

#: ../src/generic/logg.cpp:1030
msgid "invalid message box return value"
msgstr "ongeldige return-waarde van berichtvenster"

#: ../src/common/zipstrm.cpp:1647
msgid "invalid zip file"
msgstr "Ongeldig zip-bestand"

#: ../src/common/fontcmn.cpp:1001
msgid "italic"
msgstr "cursief"

#: ../src/common/fontcmn.cpp:991
msgid "light"
msgstr "licht"

#: ../src/common/intl.cpp:303
#, c-format
msgid "locale '%s' cannot be set."
msgstr "landinstelling '%s' kan niet worden ingesteld."

#: ../src/common/datetimefmt.cpp:2125
msgid "midnight"
msgstr "middernacht"

#: ../src/common/datetimefmt.cpp:1970
msgid "nineteenth"
msgstr "negentiende"

#: ../src/common/datetimefmt.cpp:1960
msgid "ninth"
msgstr "negende"

#: ../src/msw/dde.cpp:1116
msgid "no DDE error."
msgstr "geen DDE-fout."

#: ../src/html/chm.cpp:327
msgid "no error"
msgstr "geen fout"

#: ../src/dfb/fontmgr.cpp:174
#, c-format
msgid "no fonts found in %s, using builtin font"
msgstr "geen lettertypes gevonden in %s. Gebruik ingebouwde lettertype"

#: ../src/html/helpdata.cpp:657
msgid "noname"
msgstr "naamloos"

#: ../src/common/datetimefmt.cpp:2124
msgid "noon"
msgstr "middag"

#: ../src/richtext/richtextstyles.cpp:779
msgid "normal"
msgstr "normaal"

#: ../src/common/cmdline.cpp:1492
msgid "num"
msgstr "num"

#: ../src/common/xtixml.cpp:259
msgid "objects cannot have XML Text Nodes"
msgstr "objecten kunnen geen XML teskt Nodes hebben"

#: ../src/html/chm.cpp:339
msgid "out of memory"
msgstr "geheugen uitgeput"

#: ../src/common/debugrpt.cpp:514
msgid "process context description"
msgstr "procesinhoud beschrijving"

#: ../src/richtext/richtextbackgroundpage.cpp:227
#: ../src/richtext/richtextbackgroundpage.cpp:250
#: ../src/richtext/richtextbackgroundpage.cpp:290
#: ../src/richtext/richtextbackgroundpage.cpp:317
#: ../src/richtext/richtextfontpage.cpp:177
#: ../src/richtext/richtextfontpage.cpp:180
#: ../src/richtext/richtextborderspage.cpp:255
#: ../src/richtext/richtextborderspage.cpp:289
#: ../src/richtext/richtextborderspage.cpp:323
#: ../src/richtext/richtextborderspage.cpp:357
#: ../src/richtext/richtextborderspage.cpp:423
#: ../src/richtext/richtextborderspage.cpp:457
#: ../src/richtext/richtextborderspage.cpp:491
#: ../src/richtext/richtextborderspage.cpp:525
#: ../src/richtext/richtextborderspage.cpp:593
msgid "pt"
msgstr "pt"

#: ../src/richtext/richtextbackgroundpage.cpp:225
#: ../src/richtext/richtextbackgroundpage.cpp:228
#: ../src/richtext/richtextbackgroundpage.cpp:229
#: ../src/richtext/richtextbackgroundpage.cpp:248
#: ../src/richtext/richtextbackgroundpage.cpp:251
#: ../src/richtext/richtextbackgroundpage.cpp:252
#: ../src/richtext/richtextbackgroundpage.cpp:288
#: ../src/richtext/richtextbackgroundpage.cpp:291
#: ../src/richtext/richtextbackgroundpage.cpp:292
#: ../src/richtext/richtextbackgroundpage.cpp:315
#: ../src/richtext/richtextbackgroundpage.cpp:318
#: ../src/richtext/richtextbackgroundpage.cpp:319
#: ../src/richtext/richtextfontpage.cpp:178
#: ../src/richtext/richtextborderspage.cpp:253
#: ../src/richtext/richtextborderspage.cpp:256
#: ../src/richtext/richtextborderspage.cpp:257
#: ../src/richtext/richtextborderspage.cpp:287
#: ../src/richtext/richtextborderspage.cpp:290
#: ../src/richtext/richtextborderspage.cpp:291
#: ../src/richtext/richtextborderspage.cpp:321
#: ../src/richtext/richtextborderspage.cpp:324
#: ../src/richtext/richtextborderspage.cpp:325
#: ../src/richtext/richtextborderspage.cpp:355
#: ../src/richtext/richtextborderspage.cpp:358
#: ../src/richtext/richtextborderspage.cpp:359
#: ../src/richtext/richtextborderspage.cpp:421
#: ../src/richtext/richtextborderspage.cpp:424
#: ../src/richtext/richtextborderspage.cpp:425
#: ../src/richtext/richtextborderspage.cpp:455
#: ../src/richtext/richtextborderspage.cpp:458
#: ../src/richtext/richtextborderspage.cpp:459
#: ../src/richtext/richtextborderspage.cpp:489
#: ../src/richtext/richtextborderspage.cpp:492
#: ../src/richtext/richtextborderspage.cpp:493
#: ../src/richtext/richtextborderspage.cpp:523
#: ../src/richtext/richtextborderspage.cpp:526
#: ../src/richtext/richtextborderspage.cpp:527
#: ../src/richtext/richtextborderspage.cpp:591
#: ../src/richtext/richtextborderspage.cpp:594
#: ../src/richtext/richtextborderspage.cpp:595
#: ../src/richtext/richtextmarginspage.cpp:200
#: ../src/richtext/richtextmarginspage.cpp:202
#: ../src/richtext/richtextmarginspage.cpp:203
#: ../src/richtext/richtextmarginspage.cpp:225
#: ../src/richtext/richtextmarginspage.cpp:227
#: ../src/richtext/richtextmarginspage.cpp:228
#: ../src/richtext/richtextmarginspage.cpp:248
#: ../src/richtext/richtextmarginspage.cpp:250
#: ../src/richtext/richtextmarginspage.cpp:251
#: ../src/richtext/richtextmarginspage.cpp:273
#: ../src/richtext/richtextmarginspage.cpp:275
#: ../src/richtext/richtextmarginspage.cpp:276
#: ../src/richtext/richtextmarginspage.cpp:314
#: ../src/richtext/richtextmarginspage.cpp:316
#: ../src/richtext/richtextmarginspage.cpp:317
#: ../src/richtext/richtextmarginspage.cpp:339
#: ../src/richtext/richtextmarginspage.cpp:341
#: ../src/richtext/richtextmarginspage.cpp:342
#: ../src/richtext/richtextmarginspage.cpp:362
#: ../src/richtext/richtextmarginspage.cpp:364
#: ../src/richtext/richtextmarginspage.cpp:365
#: ../src/richtext/richtextmarginspage.cpp:387
#: ../src/richtext/richtextmarginspage.cpp:389
#: ../src/richtext/richtextmarginspage.cpp:390
#: ../src/richtext/richtextsizepage.cpp:338
#: ../src/richtext/richtextsizepage.cpp:341
#: ../src/richtext/richtextsizepage.cpp:342
#: ../src/richtext/richtextsizepage.cpp:372
#: ../src/richtext/richtextsizepage.cpp:375
#: ../src/richtext/richtextsizepage.cpp:376
#: ../src/richtext/richtextsizepage.cpp:399
#: ../src/richtext/richtextsizepage.cpp:402
#: ../src/richtext/richtextsizepage.cpp:403
#: ../src/richtext/richtextsizepage.cpp:426
#: ../src/richtext/richtextsizepage.cpp:429
#: ../src/richtext/richtextsizepage.cpp:430
#: ../src/richtext/richtextsizepage.cpp:453
#: ../src/richtext/richtextsizepage.cpp:456
#: ../src/richtext/richtextsizepage.cpp:457
#: ../src/richtext/richtextsizepage.cpp:480
#: ../src/richtext/richtextsizepage.cpp:483
#: ../src/richtext/richtextsizepage.cpp:484
#: ../src/richtext/richtextsizepage.cpp:554
#: ../src/richtext/richtextsizepage.cpp:557
#: ../src/richtext/richtextsizepage.cpp:558
#: ../src/richtext/richtextsizepage.cpp:589
#: ../src/richtext/richtextsizepage.cpp:592
#: ../src/richtext/richtextsizepage.cpp:593
#: ../src/richtext/richtextsizepage.cpp:624
#: ../src/richtext/richtextsizepage.cpp:627
#: ../src/richtext/richtextsizepage.cpp:628
#: ../src/richtext/richtextsizepage.cpp:659
#: ../src/richtext/richtextsizepage.cpp:662
#: ../src/richtext/richtextsizepage.cpp:663
msgid "px"
msgstr "px"

#: ../src/common/accelcmn.cpp:193
msgid "rawctrl"
msgstr "rawctrl"

#: ../src/html/chm.cpp:333
msgid "read error"
msgstr "fout bij lezen"

#: ../src/common/zipstrm.cpp:2085
#, c-format
msgid "reading zip stream (entry %s): bad crc"
msgstr "Inlezen van zip stream (regel %s): foute crc"

#: ../src/common/zipstrm.cpp:2080
#, c-format
msgid "reading zip stream (entry %s): bad length"
msgstr "Inlezen van zip stream (regel %s): foute lengte"

#: ../src/msw/dde.cpp:1159
msgid "reentrancy problem."
msgstr "probleem met 'reentrancy'."

#: ../src/common/datetimefmt.cpp:1953
msgid "second"
msgstr "tweede"

#: ../src/html/chm.cpp:337
msgid "seek error"
msgstr "zoekfout"

#: ../src/common/datetimefmt.cpp:1968
msgid "seventeenth"
msgstr "zeventiende"

#: ../src/common/datetimefmt.cpp:1958
msgid "seventh"
msgstr "zevende"

#: ../src/common/accelcmn.cpp:191
msgid "shift"
msgstr "shift"

#: ../src/common/appbase.cpp:773
msgid "show this help message"
msgstr "Toon deze help boodschap"

#: ../src/common/datetimefmt.cpp:1967
msgid "sixteenth"
msgstr "zestiende"

#: ../src/common/datetimefmt.cpp:1957
msgid "sixth"
msgstr "zesde"

#: ../src/common/appcmn.cpp:234
msgid "specify display mode to use (e.g. 640x480-16)"
msgstr "Kies de te gebruiken beeldscherm mode (B.V. 640x480-16)"

#: ../src/common/appcmn.cpp:220
msgid "specify the theme to use"
msgstr "Kies het te gebruiken thema"

#: ../src/richtext/richtextbuffer.cpp:9340
msgid "standard/circle"
msgstr "standaard/circel"

#: ../src/richtext/richtextbuffer.cpp:9341
msgid "standard/circle-outline"
msgstr "standaard/circel-buitenrand"

#: ../src/richtext/richtextbuffer.cpp:9343
msgid "standard/diamond"
msgstr "standaard/diamant"

#: ../src/richtext/richtextbuffer.cpp:9342
msgid "standard/square"
msgstr "standaard/vierkant"

#: ../src/richtext/richtextbuffer.cpp:9344
msgid "standard/triangle"
msgstr "standaard/driehoek"

#: ../src/common/zipstrm.cpp:1985
msgid "stored file length not in Zip header"
msgstr "opgeslagen bestandslengte niet in Zip header"

#: ../src/common/cmdline.cpp:1488
msgid "str"
msgstr "str"

#: ../src/common/fontcmn.cpp:982
msgid "strikethrough"
msgstr "doorhalen"

#: ../src/common/tarstrm.cpp:1003 ../src/common/tarstrm.cpp:1025
#: ../src/common/tarstrm.cpp:1507 ../src/common/tarstrm.cpp:1529
msgid "tar entry not open"
msgstr "tar ingang niet open"

#: ../src/common/datetimefmt.cpp:1961
msgid "tenth"
msgstr "tiende"

#: ../src/msw/dde.cpp:1123
msgid "the response to the transaction caused the DDE_FBUSY bit to be set."
msgstr "het antwoord op de transactie heeft de DDE_FBUSY-bit op 1 gezet."

#: ../src/common/datetimefmt.cpp:1954
msgid "third"
msgstr "derde"

#: ../src/common/datetimefmt.cpp:1964
msgid "thirteenth"
msgstr "dertiende"

#: ../src/common/datetimefmt.cpp:1758
msgid "today"
msgstr "vandaag"

#: ../src/common/datetimefmt.cpp:1760
msgid "tomorrow"
msgstr "morgen"

#: ../src/common/fileconf.cpp:1944
#, c-format
msgid "trailing backslash ignored in '%s'"
msgstr "trailing backslash genegeerd in '%s'"

#: ../src/gtk/aboutdlg.cpp:218
msgid "translator-credits"
msgstr ""
"Dimitri <dimitri@shortcut.nl>\n"
"Reinout van Schouwen <reinouts@gnome.org>\n"
"Kijk voor meer informatie op http://nl.gnome.org/"

#. TRANSLATORS: Name of Boolean true value
#: ../src/generic/datavgen.cpp:1028
msgid "true"
msgstr ""

#: ../src/common/datetimefmt.cpp:1963
msgid "twelfth"
msgstr "twaalfde"

#: ../src/common/datetimefmt.cpp:1971
msgid "twentieth"
msgstr "twintigste"

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:486 ../src/generic/datavgen.cpp:1263
msgid "unchecked"
msgstr ""

#: ../src/common/fontcmn.cpp:802 ../src/common/fontcmn.cpp:978
msgid "underlined"
msgstr "onderstreept"

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:490
#, fuzzy
msgid "undetermined"
msgstr "onderstreept"

#: ../src/common/fileconf.cpp:1979
#, c-format
msgid "unexpected \" at position %d in '%s'."
msgstr "onverwachte \" op positie %d in '%s'."

#: ../src/common/tarstrm.cpp:1045
msgid "unexpected end of file"
msgstr "onverwacht einde van bestand"

#: ../src/generic/progdlgg.cpp:370 ../src/common/tarstrm.cpp:371
#: ../src/common/tarstrm.cpp:394 ../src/common/tarstrm.cpp:425
msgid "unknown"
msgstr "onbekend"

#: ../src/msw/registry.cpp:150
#, fuzzy, c-format
msgid "unknown (%lu)"
msgstr "onbekend"

#: ../src/common/xtixml.cpp:253
#, c-format
msgid "unknown class %s"
msgstr "onbekende klasse %s"

#: ../src/common/regex.cpp:258 ../src/html/chm.cpp:351
msgid "unknown error"
msgstr "onbekende fout"

#: ../src/msw/dialup.cpp:471
#, c-format
msgid "unknown error (error code %08x)."
msgstr "onbekende fout (foutnummer %08x)."

#: ../src/common/fmapbase.cpp:834
#, c-format
msgid "unknown-%d"
msgstr "onbekend-%d"

#: ../src/common/docview.cpp:509
msgid "unnamed"
msgstr "naamloos"

#: ../src/common/docview.cpp:1624
#, c-format
msgid "unnamed%d"
msgstr "naamloos%d"

#: ../src/common/zipstrm.cpp:1999 ../src/common/zipstrm.cpp:2319
msgid "unsupported Zip compression method"
msgstr "niet ondersteunde Zip-compressiemethode"

#: ../src/common/translation.cpp:1892
#, c-format
msgid "using catalog '%s' from '%s'."
msgstr "catalogus '%s' van '%s' wordt gebruikt."

#: ../src/html/chm.cpp:335
msgid "write error"
msgstr "fout bij schrijven"

#: ../src/common/time.cpp:292
msgid "wxGetTimeOfDay failed."
msgstr "wxGetTimeOfDay mislukt."

#: ../src/motif/app.cpp:242
#, c-format
msgid "wxWidgets could not open display for '%s': exiting."
msgstr "wxWidgets kon beeldscherm niet openen voor '%s': afbreken."

#: ../src/x11/app.cpp:170
msgid "wxWidgets could not open display. Exiting."
msgstr "wxWidgets kon beeldscherm niet openen. Afbreken."

#: ../src/richtext/richtextsymboldlg.cpp:434
msgid "xxxx"
msgstr "xxxx"

#: ../src/common/datetimefmt.cpp:1759
msgid "yesterday"
msgstr "gisteren"

#: ../src/common/zstream.cpp:251 ../src/common/zstream.cpp:426
#, c-format
msgid "zlib error %d"
msgstr "zlib-fout %d"

#: ../src/richtext/richtextliststylepage.cpp:496
#: ../src/richtext/richtextbulletspage.cpp:288
msgid "~"
msgstr "~"