# Print profiles for the Prusa Research printers. [vendor] # Vendor name will be shown by the Config Wizard. name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 0.8.3 # Where to get the updates from? config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. #TODO: One day we may differentiate variants of the nozzles / hot ends, #for example by the melt zone size, or whether the nozzle is hardened. # Printer model name will be shown by the installation wizard. [printer_model:MK3S] name = Original Prusa i3 MK3S variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 [printer_model:MK3] name = Original Prusa i3 MK3 variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 [printer_model:MK3SMMU2S] name = Original Prusa i3 MK3S MMU2S variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 [printer_model:MK3MMU2] name = Original Prusa i3 MK3 MMU2 variants = 0.4; 0.25; 0.6 technology = FFF family = MK3 [printer_model:MK2.5S] name = Original Prusa i3 MK2.5S variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 [printer_model:MK2.5] name = Original Prusa i3 MK2.5 variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 [printer_model:MK2.5SMMU2S] name = Original Prusa i3 MK2.5S MMU2S variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 [printer_model:MK2.5MMU2] name = Original Prusa i3 MK2.5 MMU2 variants = 0.4; 0.25; 0.6 technology = FFF family = MK2.5 [printer_model:MK2S] name = Original Prusa i3 MK2S variants = 0.4; 0.25; 0.6 technology = FFF family = MK2 [printer_model:MK2SMM] name = Original Prusa i3 MK2S MMU1 variants = 0.4; 0.6 technology = FFF family = MK2 [printer_model:SL1] name = Original Prusa SL1 variants = default technology = SLA family = SL1 # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. # Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle. # All other print presets will derive from the *common* print preset. [print:*common*] avoid_crossing_perimeters = 0 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeters_first = 0 external_perimeter_extrusion_width = 0.45 extra_perimeters = 0 extruder_clearance_height = 25 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = cubic first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% interface_shells = 0 max_print_speed = 100 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = overhangs = 0 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeters = 2 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 1 skirts = 1 skirt_distance = 2 skirt_height = 3 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 support_material_contact_distance = 0.1 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 55 support_material_with_sheath = 0 support_material_xy_spacing = 50% thin_walls = 0 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 40 travel_speed = 180 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 140 xy_size_compensation = 0 [print:*MK3*] fill_pattern = grid single_extruder_multi_material_priming = 0 travel_speed = 180 wipe_tower_x = 170 wipe_tower_y = 125 [print:*MK306*] fill_pattern = gyroid fill_density = 15% single_extruder_multi_material_priming = 0 travel_speed = 180 wipe_tower_x = 170 wipe_tower_y = 125 # Print parameters common to a 0.25mm diameter nozzle. [print:*0.25nozzle*] external_perimeter_extrusion_width = 0.25 extrusion_width = 0.25 first_layer_extrusion_width = 0.25 infill_extrusion_width = 0.25 perimeter_extrusion_width = 0.25 solid_infill_extrusion_width = 0.25 top_infill_extrusion_width = 0.25 support_material_extrusion_width = 0.2 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*0.25nozzleMK3*] external_perimeter_extrusion_width = 0.25 extrusion_width = 0.25 first_layer_extrusion_width = 0.35 infill_extrusion_width = 0.25 perimeter_extrusion_width = 0.25 solid_infill_extrusion_width = 0.25 top_infill_extrusion_width = 0.25 support_material_extrusion_width = 0.2 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% perimeter_speed = 30 external_perimeter_speed = 20 small_perimeter_speed = 20 infill_speed = 45 solid_infill_speed = 45 top_solid_infill_speed = 30 support_material_speed = 40 bridge_speed = 20 gap_fill_speed = 30 perimeter_acceleration = 500 infill_acceleration = 1000 bridge_acceleration = 500 first_layer_acceleration = 500 default_acceleration = 1000 max_print_speed = 80 perimeters = 3 fill_pattern = grid fill_density = 20% output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode # Print parameters common to a 0.6mm diameter nozzle. [print:*0.6nozzle*] external_perimeter_extrusion_width = 0.61 extrusion_width = 0.67 first_layer_extrusion_width = 0.65 infill_extrusion_width = 0.7 perimeter_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.55 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*0.6nozzleMK3*] external_perimeter_extrusion_width = 0.65 extrusion_width = 0.65 first_layer_extrusion_width = 0.65 infill_extrusion_width = 0.7 perimeter_extrusion_width = 0.65 solid_infill_extrusion_width = 0.7 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.55 bridge_flow_ratio = 0.95 bridge_speed = 25 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode [print:*soluble_support*] overhangs = 1 skirts = 0 support_material = 1 support_material_contact_distance = 0 support_material_extruder = 4 support_material_extrusion_width = 0.45 support_material_interface_extruder = 4 support_material_interface_spacing = 0.1 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 1 wipe_tower_bridging = 8 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.05mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.05mm*] inherits = *common* bottom_solid_layers = 10 bridge_acceleration = 300 bridge_flow_ratio = 0.7 default_acceleration = 500 external_perimeter_speed = 20 fill_density = 20% first_layer_acceleration = 500 gap_fill_speed = 20 infill_acceleration = 800 infill_speed = 30 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 30 support_material_extrusion_width = 0.3 support_material_spacing = 1.5 layer_height = 0.05 perimeter_acceleration = 300 perimeter_speed = 30 perimeters = 3 support_material_speed = 30 top_solid_infill_speed = 20 top_solid_layers = 15 [print:0.05mm ULTRADETAIL] inherits = *0.05mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 infill_extrusion_width = 0.5 # MK3 # [print:0.05mm ULTRADETAIL MK3] inherits = *0.05mm*; *MK3* fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 # MK2 # [print:0.05mm ULTRADETAIL 0.25 nozzle] inherits = *0.05mm*; *0.25nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_density = 20% infill_speed = 20 max_print_speed = 100 perimeter_speed = 20 small_perimeter_speed = 15 solid_infill_speed = 20 support_material_speed = 20 # MK3 # [print:0.05mm ULTRADETAIL 0.25 nozzle MK3] inherits = *0.05mm*; *0.25nozzle*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_pattern = grid fill_density = 20% first_layer_extrusion_width = 0.35 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.07mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.07mm*] inherits = *common* bottom_solid_layers = 8 bridge_acceleration = 300 bridge_flow_ratio = 0.7 bridge_speed = 20 default_acceleration = 500 external_perimeter_speed = 20 fill_density = 15% first_layer_acceleration = 500 gap_fill_speed = 20 infill_acceleration = 800 infill_speed = 40 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 40 support_material_extrusion_width = 0.3 support_material_spacing = 1.5 layer_height = 0.07 perimeter_acceleration = 300 perimeter_speed = 30 perimeters = 3 support_material_speed = 40 top_solid_infill_speed = 30 top_solid_layers = 11 # MK3 # [print:0.07mm ULTRADETAIL MK3] inherits = *0.07mm*; *MK3* fill_pattern = gyroid compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 [print:0.07mm ULTRADETAIL 0.25 nozzle MK3] inherits = *0.07mm*; *0.25nozzle*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 infill_speed = 30 solid_infill_speed = 30 support_material_speed = 30 top_solid_infill_speed = 20 fill_pattern = grid fill_density = 20% first_layer_extrusion_width = 0.35 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.10mm ---XXX # XXXXXXXXXXXXXXXXXXXX # MK2 # [print:*0.10mm*] inherits = *common* bottom_solid_layers = 7 bridge_flow_ratio = 0.7 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 layer_height = 0.1 perimeter_acceleration = 800 top_solid_layers = 9 # MK2 # [print:0.10mm DETAIL] inherits = *0.10mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 perimeter_speed = 50 solid_infill_speed = 50 # MK3 # [print:0.10mm DETAIL MK3] inherits = *0.10mm*; *MK3* bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material external_perimeter_speed = 25 infill_acceleration = 1250 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% # MK2 # [print:0.10mm DETAIL 0.25 nozzle] inherits = *0.10mm*; *0.25nozzle* bridge_acceleration = 600 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 external_perimeter_speed = 20 infill_acceleration = 1600 infill_speed = 40 perimeter_acceleration = 600 perimeter_speed = 25 small_perimeter_speed = 15 solid_infill_speed = 40 top_solid_infill_speed = 30 # MK3 # [print:0.10mm DETAIL 0.25 nozzle MK3] inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.15mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.15mm*] inherits = *common* bottom_solid_layers = 5 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.15 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 7 # MK2 # [print:0.15mm 100mms Linear Advance] inherits = *0.15mm* bridge_flow_ratio = 0.95 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 infill_speed = 100 max_print_speed = 150 perimeter_speed = 60 small_perimeter_speed = 30 solid_infill_speed = 100 support_material_speed = 60 top_solid_infill_speed = 70 # MK2 # [print:0.15mm OPTIMAL] inherits = *0.15mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.45 # MK2 # [print:0.15mm OPTIMAL 0.25 nozzle] inherits = *0.15mm*; *0.25nozzle* bridge_acceleration = 600 bridge_flow_ratio = 0.7 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 external_perimeter_speed = 20 infill_acceleration = 1600 infill_speed = 40 perimeter_acceleration = 600 perimeter_speed = 25 small_perimeter_speed = 15 solid_infill_speed = 40 top_solid_infill_speed = 30 # MK2 # [print:0.15mm OPTIMAL 0.6 nozzle] inherits = *0.15mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK3 # [print:0.15mm QUALITY MK3] inherits = *0.15mm*; *MK3* bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 infill_acceleration = 1250 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% [print:0.15mm SPEED MK3] inherits = *0.15mm*; *MK3* bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 200 max_print_speed = 200 perimeter_speed = 60 solid_infill_speed = 200 top_solid_infill_speed = 50 # MK3 MMU # [print:0.15mm SOLUBLE FULL MK3] inherits = 0.15mm SPEED MK3; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK3 MMU # [print:0.15mm SOLUBLE INTERFACE MK3] inherits = 0.15mm SOLUBLE FULL MK3 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 # MK2 MMU # [print:0.15mm OPTIMAL SOLUBLE FULL] inherits = *0.15mm*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 external_perimeter_speed = 25 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK2 MMU # [print:0.15mm OPTIMAL SOLUBLE INTERFACE] inherits = 0.15mm OPTIMAL SOLUBLE FULL notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # [print:0.15mm QUALITY 0.25 nozzle MK3] inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% # MK3 # [print:0.15mm DETAIL 0.6 nozzle MK3] inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.20mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.20mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.2 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 5 # MK2 # [print:0.20mm 100mms Linear Advance] inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 infill_speed = 100 max_print_speed = 150 perimeter_speed = 60 small_perimeter_speed = 30 solid_infill_speed = 100 support_material_speed = 60 top_solid_infill_speed = 70 # MK3 # [print:0.20mm QUALITY MK3] inherits = *0.20mm*; *MK3* bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 infill_acceleration = 1250 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% [print:0.20mm SPEED MK3] inherits = *0.20mm*; *MK3* bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 200 max_print_speed = 200 perimeter_speed = 60 solid_infill_speed = 200 top_solid_infill_speed = 50 # MK3 MMU # [print:0.20mm SOLUBLE FULL MK3] inherits = 0.20mm SPEED MK3; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 # MK3 MMU # [print:0.20mm SOLUBLE INTERFACE MK3] inherits = 0.20mm SOLUBLE FULL MK3 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 # MK2 # [print:0.20mm NORMAL] inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 # MK2 # [print:0.20mm NORMAL 0.6 nozzle] inherits = *0.20mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK2 MMU # [print:0.20mm NORMAL SOLUBLE FULL] inherits = *0.20mm*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 external_perimeter_speed = 30 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder perimeter_speed = 40 solid_infill_speed = 40 top_solid_infill_speed = 30 # MK2 MMU # [print:0.20mm NORMAL SOLUBLE INTERFACE] inherits = 0.20mm NORMAL SOLUBLE FULL notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% # MK3 # [print:0.20mm DETAIL 0.6 nozzle MK3] inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.30mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.30mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.3 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 4 [print:0.30mm QUALITY 0.6 nozzle MK3] inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 [print:0.30mm DRAFT MK3] inherits = *0.30mm*; *MK3* bottom_solid_layers = 3 bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 85 max_print_speed = 200 perimeter_speed = 50 small_perimeter_speed = 30 solid_infill_speed = 80 top_solid_infill_speed = 40 support_material_speed = 45 external_perimeter_extrusion_width = 0.6 extrusion_width = 0.5 first_layer_extrusion_width = 0.42 infill_extrusion_width = 0.5 perimeter_extrusion_width = 0.5 solid_infill_extrusion_width = 0.5 top_infill_extrusion_width = 0.45 support_material_extrusion_width = 0.35 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.35mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.35mm*] inherits = *common* bottom_solid_layers = 3 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 40 first_layer_extrusion_width = 0.75 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.35 perimeter_acceleration = 800 perimeter_extrusion_width = 0.65 perimeter_speed = 50 solid_infill_extrusion_width = 0.65 solid_infill_speed = 60 top_solid_infill_speed = 50 top_solid_layers = 4 # MK2 # [print:0.35mm FAST] inherits = *0.35mm* bridge_flow_ratio = 0.95 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 first_layer_extrusion_width = 0.42 perimeter_extrusion_width = 0.43 solid_infill_extrusion_width = 0.7 top_infill_extrusion_width = 0.43 # MK2 # [print:0.35mm FAST 0.6 nozzle] inherits = *0.35mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 # MK2 MMU # [print:0.35mm FAST sol full 0.6 nozzle] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder perimeter_speed = 40 support_material_interface_layers = 3 support_material_xy_spacing = 120% top_infill_extrusion_width = 0.57 # MK2 MMU # [print:0.35mm FAST sol int 0.6 nozzle] inherits = 0.35mm FAST sol full 0.6 nozzle support_material_extruder = 0 support_material_interface_layers = 2 support_material_with_sheath = 0 support_material_xy_spacing = 150% # MK3 # [print:0.35mm SPEED 0.6 nozzle MK3] inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 # XXXXXXXXXXXXXXXXXXXX # XXX--- 0.40mm ---XXX # XXXXXXXXXXXXXXXXXXXX [print:*0.40mm*] inherits = *common* bottom_solid_layers = 3 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 40 first_layer_extrusion_width = 0.65 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.4 perimeter_acceleration = 800 perimeter_extrusion_width = 0.65 perimeter_speed = 50 solid_infill_extrusion_width = 0.65 solid_infill_speed = 60 top_solid_infill_speed = 40 top_solid_layers = 4 # MK3 # [print:0.40mm DRAFT 0.6 nozzle MK3] inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1250 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.7 perimeter_extrusion_width = 0.7 infill_extrusion_width = 0.72 solid_infill_extrusion_width = 0.72 # XXXXXXXXXXXXXXXXXXXXXX # XXX----- MK2.5 ----XXX # XXXXXXXXXXXXXXXXXXXXXX # MK2.5 # [print:0.15mm 100mms Linear Advance MK2.5] inherits = 0.15mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 # [print:0.15mm OPTIMAL MK2.5] inherits = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # [print:0.15mm OPTIMAL SOLUBLE FULL MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 # MK2.5 MMU2 # [print:0.15mm OPTIMAL SOLUBLE INTERFACE MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 # MK2.5 # [print:0.20mm 100mms Linear Advance MK2.5] inherits = 0.20mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 # [print:0.20mm NORMAL MK2.5] inherits = 0.20mm NORMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # [print:0.20mm NORMAL SOLUBLE FULL MK2.5] inherits = 0.20mm NORMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 # [print:0.20mm NORMAL SOLUBLE INTERFACE MK2.5] inherits = 0.20mm NORMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 # MK2.5 # [print:0.35mm FAST MK2.5] inherits = 0.35mm FAST compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 # XXXXXXxxXXXXXXXXXXXXXX # XXX--- filament ---XXX # XXXXXXXXxxXXXXXXXXXXXX [filament:*common*] cooling = 1 compatible_printers = # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_toolchange_delay = 0 filament_cooling_moves = 4 filament_cooling_initial_speed = 2.2 filament_cooling_final_speed = 3.4 filament_load_time = 0 filament_unload_time = 0 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_minimal_purge_on_wipe_tower = 15 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode" [filament:*PLA*] inherits = *common* bed_temperature = 60 bridge_fan_speed = 100 disable_fan_first_layers = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #FF3232 filament_max_volumetric_speed = 15 filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 temperature = 210 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" [filament:*PET*] inherits = *common* bed_temperature = 90 bridge_fan_speed = 50 disable_fan_first_layers = 3 fan_always_on = 1 fan_below_layer_time = 20 filament_colour = #FF8000 filament_max_volumetric_speed = 8 filament_type = PET first_layer_bed_temperature = 85 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode" temperature = 240 [filament:*PET06*] inherits = *PET* compatible_printers_condition = nozzle_diameter[0]==0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_max_volumetric_speed = 15 [filament:*ABS*] inherits = *common* bed_temperature = 110 bridge_fan_speed = 30 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #3A80CA filament_max_volumetric_speed = 11 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_type = ABS first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 20 temperature = 255 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" [filament:*FLEX*] inherits = *common* bed_temperature = 50 bridge_fan_speed = 100 # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) cooling = 0 disable_fan_first_layers = 1 extrusion_multiplier = 1.2 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #00CA0A filament_max_volumetric_speed = 1.5 filament_type = FLEX first_layer_bed_temperature = 50 first_layer_temperature = 240 max_fan_speed = 90 min_fan_speed = 70 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 240 [filament:ColorFabb Brass Bronze] inherits = *PLA* # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 56.64 filament_density = 3.9 filament_colour = #804040 filament_max_volumetric_speed = 9 filament_notes = "List of materials tested with standard print settings:\n\nColorFabb bronzeFill\nColorFabb brassFill\nColorFabb steelFill\nColorFabb copperFill" [filament:ColorFabb HT] inherits = *PET* bed_temperature = 110 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 10 filament_cost = 58.66 filament_density = 1.18 first_layer_bed_temperature = 105 first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 [filament:ColorFabb PLA-PHA] inherits = *PLA* filament_cost = 55.5 filament_density = 1.24 [filament:ColorFabb woodFill] inherits = *PLA* # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 62.9 filament_density = 1.15 filament_colour = #dfc287 filament_max_volumetric_speed = 10 first_layer_temperature = 200 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 200 [filament:ColorFabb corkFill] inherits = *PLA* compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 45.45 filament_density = 1.18 filament_colour = #634d33 filament_max_volumetric_speed = 6 first_layer_temperature = 220 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 [filament:ColorFabb XT] inherits = *PET* filament_type = PET filament_cost = 62.9 filament_density = 1.27 first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 270 [filament:ColorFabb XT-CF20] inherits = *PET* compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 80.65 filament_density = 1.35 filament_colour = #804040 filament_max_volumetric_speed = 1 first_layer_bed_temperature = 90 first_layer_temperature = 260 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 [filament:ColorFabb nGen] inherits = *PET* filament_cost = 21.2 filament_density = 1.2 bridge_fan_speed = 40 fan_always_on = 0 fan_below_layer_time = 10 filament_type = NGEN first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 [filament:ColorFabb nGen flex] inherits = *FLEX* filament_cost = 0 filament_density = 1 bed_temperature = 85 bridge_fan_speed = 40 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_below_layer_time = 10 filament_max_volumetric_speed = 5 first_layer_bed_temperature = 85 first_layer_temperature = 260 max_fan_speed = 35 min_fan_speed = 20 temperature = 260 [filament:E3D Edge] inherits = *PET* filament_cost = 56.9 filament_density = 1.26 filament_type = EDGE filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" [filament:E3D PC-ABS] inherits = *ABS* filament_cost = 0 filament_type = PC filament_density = 1.05 first_layer_temperature = 270 temperature = 270 [filament:Fillamentum ABS] inherits = *ABS* filament_cost = 32.4 filament_density = 1.04 first_layer_temperature = 240 temperature = 240 [filament:Fillamentum ASA] inherits = *ABS* filament_cost = 38.7 filament_density = 1.04 fan_always_on = 1 first_layer_temperature = 265 temperature = 265 filament_type = ASA [filament:Fillamentum CPE HG100 HM100] inherits = *PET* filament_cost = 54.1 filament_density = 1.25 filament_notes = "CPE HG100 , CPE HM100" filament_type = CPE first_layer_bed_temperature = 90 first_layer_temperature = 275 max_fan_speed = 50 min_fan_speed = 50 temperature = 275 [filament:Fillamentum Timberfill] inherits = *PLA* # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 68 filament_density = 1.15 filament_colour = #804040 filament_max_volumetric_speed = 10 first_layer_temperature = 190 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 190 [filament:Generic ABS] inherits = *ABS* filament_cost = 27.82 filament_density = 1.04 filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS" [filament:Generic PET] inherits = *PET* filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" [filament:Generic PLA] inherits = *PLA* filament_cost = 25.4 filament_density = 1.24 filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" [filament:Polymaker PC-Max] inherits = *ABS* filament_cost = 77.3 filament_density = 1.20 filament_type = PC bed_temperature = 115 filament_colour = #3A80CA first_layer_bed_temperature = 100 first_layer_temperature = 270 temperature = 270 [filament:PrimaSelect PVA+] inherits = *PLA* filament_cost = 108 filament_density = 1.23 cooling = 0 fan_always_on = 0 filament_colour = #FFFFD7 filament_max_volumetric_speed = 4 filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'" filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_soluble = 1 filament_type = PLA first_layer_temperature = 195 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 195 [filament:Prusa ABS] inherits = *ABS* filament_cost = 27.82 filament_density = 1.08 filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS" [filament:*ABS MMU2*] inherits = Prusa ABS compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_cooling_final_speed = 50 filament_cooling_initial_speed = 10 filament_cooling_moves = 5 filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"; filament_loading_speed_start = 19 filament_load_time = 15 filament_unload_time = 12 filament_loading_speed = 14 filament_unloading_speed = 20 [filament:Generic ABS MMU2] inherits = *ABS MMU2* [filament:Prusa ABS MMU2] inherits = *ABS MMU2* [filament:Prusa HIPS] inherits = *ABS* filament_cost = 27.3 filament_density = 1.04 bridge_fan_speed = 50 cooling = 1 extrusion_multiplier = 0.9 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #FFFFD7 filament_soluble = 1 filament_type = HIPS first_layer_temperature = 220 max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 [filament:Prusa PET] inherits = *PET* filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG" compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PETG] inherits = *PET* first_layer_temperature = 240 temperature = 250 filament_cost = 24.99 filament_density = 1.27 filament_type = PETG compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusa PET 0.6 nozzle] inherits = *PET06* filament_cost = 27.82 filament_density = 1.27 filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG" [filament:Prusament PETG 0.6 nozzle] inherits = *PET06* first_layer_temperature = 240 temperature = 250 filament_cost = 24.99 filament_density = 1.27 filament_type = PETG [filament:*PET MMU2*] inherits = Prusa PET compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 230 first_layer_temperature = 230 filament_cooling_final_speed = 1 filament_cooling_initial_speed = 2 filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_notes = PET filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 120 filament_loading_speed_start = 19 [filament:Generic PET MMU2] inherits = *PET MMU2* [filament:Prusa PET MMU2] inherits = *PET MMU2* [filament:Prusament PETG MMU2] inherits = *PET MMU2* filament_type = PETG [filament:Prusa PLA] inherits = *PLA* filament_cost = 25.4 filament_density = 1.24 filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFiberlogy PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nAmazonBasics PLA" [filament:Prusament PLA] inherits = *PLA* temperature = 215 filament_cost = 24.99 filament_density = 1.24 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" [filament:*PLA MMU2*] inherits = Prusa PLA compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 205 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_loading_speed_start = 19 filament_minimal_purge_on_wipe_tower = 15 filament_unloading_speed_start = 100 [filament:Generic PLA MMU2] inherits = *PLA MMU2* [filament:Prusa PLA MMU2] inherits = *PLA MMU2* [filament:Prusament PLA MMU2] inherits = *PLA MMU2* [filament:SemiFlex or Flexfill 98A] inherits = *FLEX* filament_cost = 82 filament_density = 1.22 [filament:Taulman Bridge] inherits = *common* filament_cost = 40 filament_density = 1.13 bed_temperature = 90 bridge_fan_speed = 40 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #DEE0E6 filament_max_volumetric_speed = 10 filament_soluble = 0 filament_type = NYLON first_layer_bed_temperature = 60 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 250 [filament:Taulman T-Glase] inherits = *PET* filament_cost = 40 filament_density = 1.27 bridge_fan_speed = 40 cooling = 0 fan_always_on = 0 first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" [filament:Verbatim BVOH] inherits = *common* filament_cost = 218 filament_density = 1.23 bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 filament_max_volumetric_speed = 4 filament_notes = "List of materials tested with standard PVA print settings:\n\nVerbatim BVOH" filament_soluble = 1 filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 210 [filament:Verbatim BVOH MMU2] inherits = Verbatim BVOH compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 195 fan_always_on = 1 first_layer_temperature = 200 filament_cooling_final_speed = 1 filament_cooling_initial_speed = 2 filament_max_volumetric_speed = 4 filament_type = PLA filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 100 filament_loading_speed_start = 19 [filament:PrimaSelect PVA+ MMU2] inherits = *common* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 disable_fan_first_layers = 1 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 4 filament_cooling_moves = 2 filament_cost = 25.4 filament_density = 1.24 filament_diameter = 1.75 filament_load_time = 15 filament_loading_speed = 14 filament_loading_speed_start = 19 filament_max_volumetric_speed = 4 filament_minimal_purge_on_wipe_tower = 5 filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+" filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6" filament_soluble = 1 filament_toolchange_delay = 0 filament_type = PLA filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 100 first_layer_bed_temperature = 60 first_layer_temperature = 200 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 195 [filament:Verbatim PP] inherits = *common* filament_cost = 72 filament_density = 0.89 bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 2 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #DEE0E6 filament_max_volumetric_speed = 5 filament_notes = "List of materials tested with standard PLA print settings:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" filament_type = PP first_layer_bed_temperature = 100 first_layer_temperature = 220 max_fan_speed = 100 min_fan_speed = 100 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 [sla_print:*common*] compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ layer_height = 0.05 output_filename_format = [input_filename_base].sl1 pad_edge_radius = 0.5 pad_enable = 1 pad_max_merge_distance = 50 pad_wall_height = 0 pad_wall_thickness = 1 pad_wall_slope = 90 slice_closing_radius = 0.005 support_base_diameter = 3 support_base_height = 1 support_critical_angle = 45 support_density_at_45 = 250 support_density_at_horizontal = 500 support_head_front_diameter = 0.4 support_head_penetration = 0.4 support_head_width = 3 support_max_bridge_length = 10 support_minimal_z = 0 support_object_elevation = 5 support_pillar_diameter = 1 support_pillar_connection_mode = zigzag support_pillar_widening_factor = 0 supports_enable = 1 [sla_print:0.025 UltraDetail] inherits = *common* layer_height = 0.025 support_head_width = 2 [sla_print:0.035 Detail] inherits = *common* layer_height = 0.035 [sla_print:0.05 Normal] inherits = *common* layer_height = 0.05 [sla_print:0.1 Fast] inherits = *common* layer_height = 0.1 support_head_front_diameter = 0.5 support_head_penetration = 0.5 support_pillar_diameter = 1.3 ########### Materials 0.025 [sla_material:*common 0.05*] compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/ compatible_prints_condition = layer_height == 0.05 exposure_time = 12 initial_exposure_time = 45 initial_layer_height = 0.05 material_correction = 1,1,1 material_notes = [sla_material:*common 0.025*] inherits = *common 0.05* compatible_prints_condition = layer_height == 0.025 exposure_time = 10 initial_exposure_time = 35 initial_layer_height = 0.025 [sla_material:*common 0.035*] inherits = *common 0.05* compatible_prints_condition = layer_height == 0.035 exposure_time = 13 initial_exposure_time = 40 initial_layer_height = 0.035 [sla_material:*common 0.1*] inherits = *common 0.05* compatible_prints_condition = layer_height == 0.1 exposure_time = 20 initial_exposure_time = 45 initial_layer_height = 0.1 ########### Materials 0.025 [sla_material:BlueCast Phrozen Wax 0.025] inherits = *common 0.025* exposure_time = 15 initial_exposure_time = 50 [sla_material:BlueCast EcoGray 0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 40 [sla_material:BlueCast Keramaster Dental 0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 45 [sla_material:BlueCast X10 0.025] inherits = *common 0.025* exposure_time = 4 initial_exposure_time = 100 [sla_material:Prusa Orange Tough 0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 [sla_material:Prusa Grey Tough 0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 30 [sla_material:Prusa Azure Blue Tough 0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 30 [sla_material:Prusa Maroon Tough 0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 [sla_material:Prusa Beige Tough 0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 [sla_material:Prusa Pink Tough 0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 30 [sla_material:Prusa White Tough 0.025] inherits = *common 0.025* exposure_time = 6.5 initial_exposure_time = 30 [sla_material:Prusa Transparent Tough 0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 15 [sla_material:Prusa Green Casting 0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 35 ## [sla_material:Prusa Transparent Green Tough 0.025] ## inherits = *common 0.025* ## exposure_time = 5 ## initial_exposure_time = 30 ########### Materials 0.05 [sla_material:BlueCast EcoGray 0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 [sla_material:BlueCast Keramaster 0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 45 [sla_material:BlueCast Keramaster Dental 0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 50 [sla_material:BlueCast LCD-DLP Original 0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 60 [sla_material:BlueCast Phrozen Wax 0.05] inherits = *common 0.05* exposure_time = 16 initial_exposure_time = 50 [sla_material:BlueCast S+ 0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 45 [sla_material:BlueCast X10 0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 100 [sla_material:Monocure 3D Black Rapid Resin 0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 40 [sla_material:Monocure 3D Blue Rapid Resin 0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 40 [sla_material:Monocure 3D Clear Rapid Resin 0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 40 [sla_material:Monocure 3D Grey Rapid Resin 0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 [sla_material:Monocure 3D White Rapid Resin 0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 40 [sla_material:3DM-HTR140 (high temperature) 0.05] inherits = *common 0.05* exposure_time = 12 initial_exposure_time = 45 [sla_material:3DM-ABS 0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 25 [sla_material:3DM-BLACK 0.05] inherits = *common 0.05* exposure_time = 20 initial_exposure_time = 40 [sla_material:3DM-DENT 0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 45 [sla_material:3DM-HR Green 0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 40 [sla_material:3DM-HR Red Wine 0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 [sla_material:3DM-XPRO White 0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 [sla_material:FTD Ash Grey 0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 40 [sla_material:Harz Labs Model Resin Cherry 0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 45 [sla_material:Photocentric Hard Grey 0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 ## Prusa [sla_material:Prusa Beige Tough 0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 [sla_material:Prusa Orange Tough 0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 30 [sla_material:Prusa Grey Tough 0.05] inherits = *common 0.05* exposure_time = 8.5 initial_exposure_time = 30 [sla_material:Prusa Black Tough 0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 30 ## [sla_material:Prusa Beige Super Low Odor 0.05] ## inherits = *common 0.05* ## exposure_time = 7.5 ## initial_exposure_time = 30 ## [sla_material:Prusa White Super Low Odor 0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 30 ## [sla_material:Prusa Grey Super Low Odor 0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 30 ## [sla_material:Prusa Black High Tenacity 0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 30 [sla_material:Prusa Green Casting 0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 40 ## [sla_material:Prusa Yellow Solid 0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 30 [sla_material:Prusa White Tough 0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 30 ## [sla_material:Prusa Transparent Green Tough 0.05] ## inherits = *common 0.05* ## exposure_time = 6 ## initial_exposure_time = 30 [sla_material:Prusa Transparent Red Tough 0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 30 [sla_material:Prusa Maroon Tough 0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 30 [sla_material:Prusa Pink Tough 0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 [sla_material:Prusa Azure Blue Tough 0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 [sla_material:Prusa Transparent Tough 0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 15 ## [sla_material:Prusa Yellow Flexible 0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 30 ## [sla_material:Prusa Clear Flexible 0.05] ## inherits = *common 0.05* ## exposure_time = 5 ## initial_exposure_time = 15 ## [sla_material:Prusa White Flexible 0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 30 ## [sla_material:Prusa Blue Flexible 0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 30 ## [sla_material:Prusa Black Flexible 0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 30 ## [sla_material:Prusa Red Flexible 0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 30 ########### Materials 0.035 [sla_material:Prusa Orange Tough 0.035] inherits = *common 0.035* exposure_time = 6 initial_exposure_time = 30 ########### Materials 0.1 [sla_material:Prusa Orange Tough 0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 [sla_material:Prusa Beige Tough 0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 [sla_material:Prusa Pink Tough 0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 [sla_material:Prusa Azure Blue Tough 0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 [sla_material:Prusa Maroon Tough 0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 [sla_material:Prusa White Tough 0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 [sla_material:Prusa Black Tough 0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 55 [sla_material:Prusa Transparent Tough 0.1] inherits = *common 0.1* exposure_time = 8 initial_exposure_time = 30 [sla_material:Prusa Green Casting 0.1] inherits = *common 0.1* exposure_time = 15 initial_exposure_time = 50 [printer:*common*] printer_technology = FFF bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n between_objects_gcode = deretract_speed = 0 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors extruder_colour = #FFFF00 extruder_offset = 0x0 gcode_flavor = marlin silent_mode = 0 remaining_times = 1 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] max_layer_height = 0.25 min_layer_height = 0.07 max_print_height = 200 nozzle_diameter = 0.4 octoprint_apikey = octoprint_host = printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n printer_settings_id = retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 0.8 retract_length_toolchange = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 start_gcode = M115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 printer_model = MK2S printer_variant = 0.4 default_print_profile = 0.15mm OPTIMAL default_filament_profile = Prusament PLA [printer:*multimaterial*] inherits = *common* deretract_speed = 50 retract_before_travel = 3 retract_before_wipe = 60% retract_layer_change = 0 retract_length = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 80 parking_pos_retraction = 92 cooling_tube_length = 5 cooling_tube_retraction = 91.5 single_extruder_multi_material = 1 variable_layer_height = 1 printer_model = MK2SMM [printer:*mm-single*] inherits = *multimaterial* end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN start_gcode = M115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0 default_print_profile = 0.15mm OPTIMAL [printer:*mm-multi*] inherits = *multimaterial* high_current_on_filament_swap = 1 end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259 nozzle_diameter = 0.4,0.4,0.4,0.4 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN start_gcode = M115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0 default_print_profile = 0.15mm OPTIMAL # XXXXXXXXXXXXXXXXX # XXX--- MK2 ---XXX # XXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2S] inherits = *common* [printer:Original Prusa i3 MK2S 0.25 nozzle] inherits = *common* max_layer_height = 0.15 min_layer_height = 0.05 nozzle_diameter = 0.25 retract_length = 1 retract_speed = 50 variable_layer_height = 1 printer_variant = 0.25 default_print_profile = 0.10mm DETAIL 0.25 nozzle [printer:Original Prusa i3 MK2S 0.6 nozzle] inherits = *common* max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL 0.6 nozzle # XXXXXXXXXXXXXXXXXXX # XXX--- MK2MM ---XXX # XXXXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2S MMU1 Single] inherits = *mm-single* max_layer_height = 0.25 min_layer_height = 0.07 [printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle] inherits = *mm-single* nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL 0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 [printer:Original Prusa i3 MK2S MMU1] inherits = *mm-multi* nozzle_diameter = 0.4,0.4,0.4,0.4 max_layer_height = 0.25 min_layer_height = 0.07 [printer:Original Prusa i3 MK2S MMU1 0.6 nozzle] inherits = *mm-multi* nozzle_diameter = 0.6,0.6,0.6,0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL 0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 # XXXXXXXXXXXXXXXXXXX # XXX--- MK2.5 ---XXX # XXXXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2.5] inherits = Original Prusa i3 MK2S printer_model = MK2.5 remaining_times = 1 start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.25 nozzle] inherits = Original Prusa i3 MK2S 0.25 nozzle printer_model = MK2.5 remaining_times = 1 start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 0.6 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 remaining_times = 1 start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5 MMU2 Single] inherits = Original Prusa i3 MK2.5; *mm2* printer_model = MK2.5MMU2 single_extruder_multi_material = 0 max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2] inherits = Original Prusa i3 MK2.5; *mm2* printer_model = MK2.5MMU2 max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 # The 5x nozzle diameter defines the number of extruders. Other extruder parameters # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S] inherits = Original Prusa i3 MK2.5 printer_model = MK2.5S start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.25 nozzle] inherits = Original Prusa i3 MK2.5 0.25 nozzle printer_model = MK2.5S start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.6 nozzle] inherits = Original Prusa i3 MK2.5 0.6 nozzle printer_model = MK2.5S start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S MMU2S Single] inherits = Original Prusa i3 MK2.5; *mm2s* printer_model = MK2.5SMMU2S single_extruder_multi_material = 0 max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL 0.6 nozzle [printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n max_layer_height = 0.15 min_layer_height = 0.05 nozzle_diameter = 0.25 printer_variant = 0.25 default_print_profile = 0.10mm DETAIL 0.25 nozzle start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n [printer:Original Prusa i3 MK2.5S MMU2S] inherits = Original Prusa i3 MK2.5; *mm2s* printer_model = MK2.5SMMU2S max_print_height = 200 remaining_times = 1 silent_mode = 0 retract_lift_below = 199 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 # The 5x nozzle diameter defines the number of extruders. Other extruder parameters # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n # XXXXXXXXXXXXXXXXX # XXX--- MK3 ---XXX # XXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK3] inherits = *common* end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_x = 1000,960 machine_max_acceleration_y = 1000,960 machine_max_acceleration_z = 1000,1000 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 200,100 machine_max_feedrate_y = 200,100 machine_max_feedrate_z = 12,12 machine_max_jerk_e = 1.5,1.5 machine_max_jerk_x = 8,8 machine_max_jerk_y = 8,8 machine_max_jerk_z = 0.4,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 silent_mode = 1 remaining_times = 1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n retract_lift_below = 209 max_print_height = 210 start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} printer_model = MK3 default_print_profile = 0.15mm QUALITY MK3 [printer:Original Prusa i3 MK3 0.25 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 [printer:Original Prusa i3 MK3 0.6 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 [printer:Original Prusa i3 MK3S] inherits = Original Prusa i3 MK3 printer_model = MK3S start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:Original Prusa i3 MK3S 0.25 nozzle] inherits = Original Prusa i3 MK3 0.25 nozzle printer_model = MK3S start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:Original Prusa i3 MK3S 0.6 nozzle] inherits = Original Prusa i3 MK3 0.6 nozzle printer_model = MK3S start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:*mm2*] inherits = Original Prusa i3 MK3 single_extruder_multi_material = 1 cooling_tube_length = 10 cooling_tube_retraction = 30 parking_pos_retraction = 85 retract_length_toolchange = 3 extra_loading_move = -13 printer_model = MK3MMU2 default_print_profile = 0.15mm QUALITY MK3 default_filament_profile = Prusament PLA MMU2 [printer:*mm2s*] inherits = Original Prusa i3 MK3 single_extruder_multi_material = 1 cooling_tube_length = 20 cooling_tube_retraction = 40 parking_pos_retraction = 85 retract_length_toolchange = 3 extra_loading_move = -25 printer_model = MK3SMMU2S default_print_profile = 0.15mm QUALITY MK3 default_filament_profile = Prusament PLA MMU2 [printer:Original Prusa i3 MK3 MMU2 Single] inherits = *mm2* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single single_extruder_multi_material = 0 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single single_extruder_multi_material = 0 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2] inherits = *mm2* # The 5x nozzle diameter defines the number of extruders. Other extruder parameters # (for example the retract values) are duplicaed from the first value, so they do not need # to be defined explicitely. machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK3S MMU2S Single] inherits = *mm2s* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors [printer:Original Prusa i3 MK3S MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK3S MMU2S Single single_extruder_multi_material = 0 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 [printer:Original Prusa i3 MK3S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK3S MMU2S Single single_extruder_multi_material = 0 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 [printer:Original Prusa i3 MK3S MMU2S] inherits = *mm2s* machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n # 0.6 nozzle MMU printer profile - only for single mode for now # [printer:Original Prusa i3 MK3S MMU2S 0.6 nozzle] # inherits = Original Prusa i3 MK3S MMU2S # nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 # max_layer_height = 0.40 # min_layer_height = 0.15 # printer_variant = 0.6 # default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3 [printer:Original Prusa SL1] printer_technology = SLA printer_model = SL1 printer_variant = default default_sla_material_profile = Prusa Orange Tough 0.05 default_sla_print_profile = 0.05 Normal bed_shape = 0.98x1.02,119.98x1.02,119.98x67.02,0.98x67.02 display_height = 68.04 display_orientation = portrait display_pixels_x = 2560 display_pixels_y = 1440 display_width = 120.96 max_print_height = 150 printer_correction = 1,1,1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer. [obsolete_presets] print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2" filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"