# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC [vendor] # Vendor name will be shown by the Config Wizard. name = Lulzbot config_version = 0.0.1 config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Lulzbot/ [printer_model:MINI_AERO] name = Mini Aero variants = 0.5 technology = FFF #bed_model = mini_bed.stl #bed_texture = mini.svg default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot [printer_model:TAZ6_AERO] name = Taz6 Aero variants = 0.5 technology = FFF default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot [print:0.3mm @lulzbot] avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 3 bridge_acceleration = 500 bridge_angle = 0 bridge_flow_ratio = 1 bridge_speed = 30 brim_width = 0 clip_multipart_objects = 0 compatible_printers = compatible_printers_condition = complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 0 external_perimeter_extrusion_width = 0.56 external_perimeter_speed = 50% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.56 fill_angle = 45 fill_density = 20% fill_pattern = gyroid first_layer_acceleration = 500 first_layer_extrusion_width = 0.6 first_layer_height = 100% first_layer_speed = 40% gap_fill_speed = 20 gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.56 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 60 inherits = interface_shells = 0 layer_height = 0.3 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode overhangs = 1 perimeter_acceleration = 500 perimeter_extruder = 1 perimeter_extrusion_width = 0.56 perimeter_speed = 60 perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 1 skirt_distance = 3 skirt_height = 1 skirts = 3 slice_closing_radius = 0.049 small_perimeter_speed = 15 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.56 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.44 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_synchronize_layers = 0 support_material_threshold = 0 support_material_with_sheath = 1 support_material_xy_spacing = 50% thin_walls = 1 threads = 12 top_fill_pattern = rectilinear top_infill_extrusion_width = 0.52 top_solid_infill_speed = 40 top_solid_layers = 3 travel_speed = 175 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 [filament:ColorFabb PLA-PHA @lulzbot] filament_vendor = ColorFabb bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #29B2B2 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 0 filament_density = 1.25 filament_deretract_speed = nil filament_diameter = 2.85 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_soluble = 0 filament_toolchange_delay = 0 filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 200 inherits = max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 200 [filament:PrintedSolid Jesse PLA @lulzbot] filament_vendor = PrintedSolid bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = compatible_printers_condition = compatible_prints = compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #29B2B2 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 27 filament_density = 1.25 filament_deretract_speed = nil filament_diameter = 2.85 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 0 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_soluble = 0 filament_toolchange_delay = 0 filament_type = PLA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 220 inherits = max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 220 [printer:Mini Aero 0.5mm] printer_model = MINI_AERO printer_variant = 0.5 default_print_profile = 0.3mm @lulzbot default_filament_profile = PrintedSolid Jesse PLA @lulzbot bed_shape = 0x0,154x0,154x154,0x154 before_layer_gcode = between_objects_gcode = cooling_tube_length = 5 cooling_tube_retraction = 91.5 deretract_speed = 20 end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG92 E1 ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000 ; move to cooling position\nG1 E1 ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77 ; Stop GLCD Timer\nG1 X145 F1000 ; move extruder out of the way\nG1 Y175 F1000 ; present finished print\nM140 S0; cool downs\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n extra_loading_move = -2 extruder_colour = "" extruder_offset = 0x0 gcode_flavor = marlin high_current_on_filament_swap = 0 host_type = octoprint inherits = layer_gcode = machine_max_acceleration_e = 10000,5000 machine_max_acceleration_extruding = 1500,1250 machine_max_acceleration_retracting = 1500,1250 machine_max_acceleration_x = 9000,1000 machine_max_acceleration_y = 9000,1000 machine_max_acceleration_z = 100,200 machine_max_feedrate_e = 40,120 machine_max_feedrate_x = 800,200 machine_max_feedrate_y = 800,200 machine_max_feedrate_z = 8,12 machine_max_jerk_e = 2.5,2.5 machine_max_jerk_x = 20,10 machine_max_jerk_y = 20,10 machine_max_jerk_z = 0.2,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 max_layer_height = 0 max_print_height = 158 min_layer_height = 0.07 nozzle_diameter = 0.5 parking_pos_retraction = 92 print_host = printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center. printhost_apikey = printhost_cafile = remaining_times = 0 retract_before_travel = 2 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 1 retract_length_toolchange = 10 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 serial_port = serial_speed = 250000 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier. thumbnails = toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 [printer:Taz6 Aero 0.5mm] printer_model = TAZ6_AERO printer_variant = 0.5 default_print_profile = 0.3mm @lulzbot default_filament_profile = PrintedSolid Jesse PLA @lulzbot bed_shape = 0x0,280x0,280x280,0x280 before_layer_gcode = between_objects_gcode = cooling_tube_length = 5 cooling_tube_retraction = 91.5 deretract_speed = 20 end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG91 ; relative positioning\nG1 E-1 F300 ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000 ; lift up and retract even more filament\nG1 E6 ; re-prime extruder\nM117 Cooling please wait ; progress indicator message on LCD\nG90 ; absolute positioning\nG1 Y0 F3000 ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000 ; present finished print\nM140 S0; cool downs\nM77 ; stop GLCD timer\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n extra_loading_move = -2 extruder_colour = "" extruder_offset = 0x0 gcode_flavor = marlin high_current_on_filament_swap = 0 host_type = octoprint inherits = layer_gcode = machine_max_acceleration_e = 1000,5000 machine_max_acceleration_extruding = 1000,1250 machine_max_acceleration_retracting = 1000,1250 machine_max_acceleration_x = 9000,1000 machine_max_acceleration_y = 9000,1000 machine_max_acceleration_z = 100,200 machine_max_feedrate_e = 40,120 machine_max_feedrate_x = 800,200 machine_max_feedrate_y = 800,200 machine_max_feedrate_z = 3,12 machine_max_jerk_e = 2.5,2.5 machine_max_jerk_x = 12,10 machine_max_jerk_y = 12,10 machine_max_jerk_z = 0.2,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 max_layer_height = 0 max_print_height = 250 min_layer_height = 0.07 nozzle_diameter = 0.5 parking_pos_retraction = 92 print_host = printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center. printer_technology = FFF printhost_apikey = printhost_cafile = remaining_times = 0 retract_before_travel = 2 retract_before_wipe = 0% retract_layer_change = 0 retract_length = 2 retract_length_toolchange = 10 retract_lift = 0 retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 serial_port = serial_speed = 250000 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n thumbnails = toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0