# Print profiles for the Prusa Research printers. [vendor] # Vendor name will be shown by the Config Wizard. name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 1.4.0-alpha5 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. [printer_model:MINI] name = Original Prusa MINI && MINI+ variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MINI bed_model = mini_bed.stl bed_texture = mini.svg default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PC Blend Carbon Fiber @MINI; Prusament PVB [printer_model:MK3S] name = Original Prusa i3 MK3S && MK3S+ variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK3] name = Original Prusa i3 MK3 variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK3SMMU2S] name = Original Prusa i3 MK3S && MK3S+ MMU2S variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK3MMU2] name = Original Prusa i3 MK3 MMU2 variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK3 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK2.5S] name = Original Prusa i3 MK2.5S variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK2.5] name = Original Prusa i3 MK2.5 variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK2.5SMMU2S] name = Original Prusa i3 MK2.5S MMU2S variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK2.5MMU2] name = Original Prusa i3 MK2.5 MMU2 variants = 0.4; 0.25; 0.6; 0.8 technology = FFF family = MK2.5 bed_model = mk3_bed.stl bed_texture = mk3.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2 [printer_model:MK2S] name = Original Prusa i3 MK2S variants = 0.4; 0.25; 0.6 technology = FFF family = MK2 bed_model = mk2_bed.stl bed_texture = mk2.svg default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:MK2SMM] name = Original Prusa i3 MK2S MMU1 variants = 0.4; 0.6 technology = FFF family = MK2 bed_model = mk2_bed.stl bed_texture = mk2.svg default_materials = Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB [printer_model:SL1] name = Original Prusa SL1 variants = default technology = SLA family = SL1 bed_model = sl1_bed.stl bed_texture = sl1.svg default_materials = Prusa Orange Tough @0.05 [printer_model:SL1S] name = Original Prusa SL1S SPEED variants = default technology = SLA family = SL1 bed_model = sl1s_bed.stl bed_texture = sl1s.svg default_materials = Prusa Orange Tough @0.05 SL1S # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. # Common print presets [print:*common*] avoid_crossing_perimeters = 0 thick_bridges = 0 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 1 bridge_speed = 25 brim_width = 0 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 0 elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeters_first = 0 external_perimeter_extrusion_width = 0.45 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = cubic first_layer_acceleration = 800 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 gap_fill_speed = 40 gcode_comments = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% interface_shells = 0 max_print_speed = 100 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = overhangs = 0 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeters = 2 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 post_process = print_settings_id = raft_layers = 0 raft_first_layer_density = 90% resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 1 skirts = 1 skirt_distance = 2 skirt_height = 3 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 support_material_contact_distance = 0.2 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 80% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 50 support_material_with_sheath = 0 support_material_xy_spacing = 60% support_material_bottom_interface_layers = 0 thin_walls = 0 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 40 travel_speed = 180 travel_speed_z = 12 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 140 xy_size_compensation = 0 top_solid_min_thickness = 0.7 bottom_solid_min_thickness = 0.5 gcode_label_objects = 1 infill_anchor = 2.5 infill_anchor_max = 12 [print:*MK3*] fill_pattern = grid single_extruder_multi_material_priming = 0 travel_speed = 180 wipe_tower_x = 170 wipe_tower_y = 125 [print:*MK306*] inherits = *MK3* fill_pattern = gyroid fill_density = 15% [print:*MINI*] fill_pattern = grid travel_speed = 150 wipe_tower = 0 default_acceleration = 1000 first_layer_acceleration = 800 infill_acceleration = 1000 bridge_acceleration = 1000 support_material_speed = 40 max_print_speed = 150 extruder_clearance_height = 20 extruder_clearance_radius = 35 [print:*0.25nozzle*] elefant_foot_compensation = 0 external_perimeter_extrusion_width = 0.25 extrusion_width = 0.25 first_layer_extrusion_width = 0.3 infill_extrusion_width = 0.25 perimeter_extrusion_width = 0.25 solid_infill_extrusion_width = 0.25 top_infill_extrusion_width = 0.25 support_material_extrusion_width = 0.25 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% support_material_contact_distance = 0.1 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode thick_bridges = 0 bridge_flow_ratio = 1 bridge_speed = 20 [print:*0.25nozzleMK3*] inherits = *0.25nozzle* perimeter_speed = 30 external_perimeter_speed = 20 small_perimeter_speed = 20 infill_speed = 45 solid_infill_speed = 45 top_solid_infill_speed = 30 support_material_speed = 40 gap_fill_speed = 30 perimeter_acceleration = 500 infill_acceleration = 1000 bridge_acceleration = 500 first_layer_acceleration = 500 default_acceleration = 1000 max_print_speed = 80 perimeters = 3 fill_pattern = grid fill_density = 20% [print:*0.25nozzleMINI*] inherits = *0.25nozzleMK3* infill_speed = 40 solid_infill_speed = 40 infill_acceleration = 800 first_layer_acceleration = 500 [print:*0.6nozzle*] external_perimeter_extrusion_width = 0.61 extrusion_width = 0.67 first_layer_extrusion_width = 0.65 infill_extrusion_width = 0.7 perimeter_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.55 support_material_contact_distance = 0.15 support_material_xy_spacing = 80% support_material_interface_spacing = 0.3 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode infill_anchor_max = 15 top_solid_min_thickness = 0.9 bottom_solid_min_thickness = 0.6 thick_bridges = 1 bridge_flow_ratio = 0.95 bridge_speed = 25 [print:*0.6nozzleMK3*] inherits = *0.6nozzle* external_perimeter_extrusion_width = 0.65 extrusion_width = 0.65 infill_extrusion_width = 0.65 thick_bridges = 0 [print:*0.6nozzleMINI*] inherits = *0.6nozzleMK3* infill_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 fill_pattern = gyroid fill_density = 15% travel_speed = 150 perimeter_acceleration = 800 infill_acceleration = 1000 bridge_acceleration = 1000 first_layer_acceleration = 800 default_acceleration = 1250 support_material_speed = 40 support_material_interface_speed = 100% [print:*0.8nozzle*] external_perimeter_extrusion_width = 0.9 extrusion_width = 0.9 first_layer_extrusion_width = 0.9 infill_extrusion_width = 0.9 perimeter_extrusion_width = 0.9 solid_infill_extrusion_width = 0.9 top_infill_extrusion_width = 0.8 support_material_extrusion_width = 0.7 support_material_contact_distance = 0.25 support_material_interface_spacing = 0.4 support_material_interface_speed = 100% support_material_spacing = 2 support_material_xy_spacing = 80% support_material_threshold = 50 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode fill_pattern = gyroid fill_density = 15% infill_anchor_max = 20 top_solid_layers = 4 bottom_solid_layers = 3 skirt_distance = 3 skirt_height = 2 first_layer_height = 0.3 infill_overlap = 30% bridge_speed = 22 gap_fill_speed = 30 bridge_flow_ratio = 0.9 perimeter_acceleration = 800 infill_acceleration = 1000 bridge_acceleration = 1000 first_layer_acceleration = 800 default_acceleration = 1000 top_solid_min_thickness = 1.2 bottom_solid_min_thickness = 0.8 single_extruder_multi_material_priming = 0 thick_bridges = 1 [print:*soluble_support*] overhangs = 1 skirts = 0 support_material = 1 support_material_contact_distance = 0 support_material_extruder = 4 support_material_extrusion_width = 0.45 support_material_interface_extruder = 4 support_material_interface_spacing = 0.1 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 1 wipe_tower_bridging = 6 support_material_interface_speed = 80% support_material_bottom_interface_layers = -1 thick_bridges = 1 [print:*0.05mm*] inherits = *common* layer_height = 0.05 bottom_solid_layers = 10 bridge_acceleration = 300 bridge_flow_ratio = 1.15 bridge_speed = 15 default_acceleration = 1000 external_perimeter_speed = 20 fill_density = 20% first_layer_acceleration = 800 gap_fill_speed = 20 infill_acceleration = 800 infill_speed = 30 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 30 support_material_extrusion_width = 0.33 support_material_spacing = 1.5 support_material_contact_distance = 0.15 perimeter_acceleration = 300 perimeter_speed = 30 perimeters = 3 support_material_speed = 30 top_solid_infill_speed = 20 top_solid_layers = 15 [print:*0.07mm*] inherits = *0.05mm* layer_height = 0.07 bottom_solid_layers = 8 bridge_flow_ratio = 1 fill_density = 15% infill_speed = 40 solid_infill_speed = 40 support_material_speed = 40 top_solid_infill_speed = 30 top_solid_layers = 11 [print:*0.10mm*] inherits = *common* bottom_solid_layers = 7 bridge_flow_ratio = 1 bridge_speed = 20 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 layer_height = 0.1 perimeter_acceleration = 800 top_solid_layers = 9 support_material_contact_distance = 0.17 [print:*0.15mm*] inherits = *common* bottom_solid_layers = 5 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.15 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 7 bridge_flow_ratio = 1 bridge_speed = 25 [print:*0.20mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.2 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 5 [print:*0.25mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 perimeter_acceleration = 800 layer_height = 0.25 perimeter_speed = 50 top_solid_layers = 4 [print:*0.30mm*] inherits = *common* bottom_solid_layers = 4 bridge_flow_ratio = 0.95 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.3 perimeter_acceleration = 800 perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 4 support_material_contact_distance = 0.3 [print:*0.35mm*] inherits = *common* bottom_solid_layers = 3 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 40 first_layer_extrusion_width = 0.75 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.35 perimeter_acceleration = 800 perimeter_extrusion_width = 0.65 perimeter_speed = 50 solid_infill_extrusion_width = 0.65 solid_infill_speed = 60 top_solid_infill_speed = 50 top_solid_layers = 4 [print:*0.40mm*] inherits = *common* bottom_solid_layers = 3 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 40 first_layer_extrusion_width = 0.65 infill_acceleration = 2000 infill_speed = 60 layer_height = 0.4 perimeter_acceleration = 800 perimeter_extrusion_width = 0.65 perimeter_speed = 50 solid_infill_extrusion_width = 0.65 solid_infill_speed = 60 top_solid_infill_speed = 40 top_solid_layers = 4 ## MK2 family ## ## MK2 - 0.4mm nozzle [print:0.05mm ULTRADETAIL] inherits = *0.05mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 infill_extrusion_width = 0.5 [print:0.10mm DETAIL] inherits = *0.10mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 external_perimeter_speed = 40 infill_acceleration = 2000 infill_speed = 60 perimeter_speed = 50 solid_infill_speed = 50 perimeters = 3 bridge_acceleration = 800 [print:0.15mm 100mms Linear Advance] inherits = *0.15mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 infill_speed = 100 max_print_speed = 150 perimeter_speed = 60 small_perimeter_speed = 30 solid_infill_speed = 100 support_material_speed = 60 top_solid_infill_speed = 70 [print:0.15mm OPTIMAL] inherits = *0.15mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.45 [print:0.20mm 100mms Linear Advance] inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 50 infill_speed = 100 max_print_speed = 150 perimeter_speed = 60 small_perimeter_speed = 30 solid_infill_speed = 100 support_material_speed = 60 top_solid_infill_speed = 70 [print:0.20mm NORMAL] inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 [print:0.35mm FAST] inherits = *0.35mm* bridge_flow_ratio = 0.95 bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 first_layer_extrusion_width = 0.42 perimeter_extrusion_width = 0.43 solid_infill_extrusion_width = 0.7 top_infill_extrusion_width = 0.45 support_material_extrusion_width = 0.37 support_material_contact_distance = 0.1 top_solid_infill_speed = 40 thick_bridges = 1 ## MMU1 specific [print:0.15mm OPTIMAL SOLUBLE FULL] inherits = *0.15mm*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 external_perimeter_speed = 25 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 bridge_flow_ratio = 0.8 bridge_speed = 30 [print:0.15mm OPTIMAL SOLUBLE INTERFACE] inherits = 0.15mm OPTIMAL SOLUBLE FULL notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% [print:0.20mm NORMAL SOLUBLE FULL] inherits = *0.20mm*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 external_perimeter_speed = 30 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder perimeter_speed = 40 solid_infill_speed = 40 top_solid_infill_speed = 30 bridge_flow_ratio = 0.95 bridge_speed = 30 [print:0.20mm NORMAL SOLUBLE INTERFACE] inherits = 0.20mm NORMAL SOLUBLE FULL notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% ## MK2 - 0.25mm nozzle [print:0.05mm ULTRADETAIL @0.25 nozzle] inherits = *0.05mm*; *0.25nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_density = 20% infill_speed = 20 max_print_speed = 100 perimeter_speed = 20 small_perimeter_speed = 15 solid_infill_speed = 20 support_material_speed = 20 support_material_contact_distance = 0.07 [print:0.10mm DETAIL @0.25 nozzle] inherits = *0.10mm*; *0.25nozzle* bridge_acceleration = 600 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 external_perimeter_speed = 20 infill_acceleration = 1000 infill_speed = 40 perimeter_acceleration = 600 perimeter_speed = 25 small_perimeter_speed = 15 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_contact_distance = 0.07 [print:0.15mm OPTIMAL @0.25 nozzle] inherits = *0.15mm*; *0.25nozzle* bridge_acceleration = 600 bridge_flow_ratio = 0.8 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 external_perimeter_speed = 20 infill_acceleration = 1000 infill_speed = 40 perimeter_acceleration = 600 perimeter_speed = 25 small_perimeter_speed = 15 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_contact_distance = 0.08 ## MK2 - 0.6mm nozzle [print:0.15mm OPTIMAL @0.6 nozzle] inherits = *0.15mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 [print:0.20mm NORMAL @0.6 nozzle] inherits = *0.20mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 [print:0.35mm FAST @0.6 nozzle] inherits = *0.35mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 ## MMU1 specific [print:0.35mm FAST sol full @0.6 nozzle] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder perimeter_speed = 40 support_material_speed = 40 support_material_interface_layers = 2 support_material_xy_spacing = 120% top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 [print:0.35mm FAST sol int @0.6 nozzle] inherits = 0.35mm FAST sol full @0.6 nozzle support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 150% ## MK2.5 [print:0.10mm DETAIL @MK2.5] inherits = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 [print:0.15mm 100mms Linear Advance @MK2.5] inherits = 0.15mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 [print:0.15mm OPTIMAL @MK2.5] inherits = 0.15mm OPTIMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 [print:0.20mm 100mms Linear Advance @MK2.5] inherits = 0.20mm 100mms Linear Advance compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 [print:0.20mm NORMAL @MK2.5] inherits = 0.20mm NORMAL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 [print:0.35mm FAST @MK2.5] inherits = 0.35mm FAST compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 single_extruder_multi_material_priming = 0 ## MK2.5 - MMU2 specific [print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 [print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 [print:0.20mm NORMAL SOLUBLE FULL @MK2.5] inherits = 0.20mm NORMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 [print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.20mm NORMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 # MK2.5 MMU2 0.6 nozzle [print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder perimeter_speed = 40 support_material_speed = 40 support_material_interface_layers = 2 support_material_xy_spacing = 80% support_material_extruder = 5 support_material_interface_extruder = 5 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 [print:0.35mm SOLUBLE INTERFACE @0.6 nozzle MK2.5] inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5 support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% ## MK3 family ## ## MK3 - 0.4mm nozzle [print:0.05mm ULTRADETAIL @MK3] inherits = *0.05mm*; *MK3* fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 [print:0.07mm ULTRADETAIL @MK3] inherits = *0.07mm*; *MK3* fill_pattern = gyroid compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material top_infill_extrusion_width = 0.4 [print:0.10mm DETAIL @MK3] inherits = *0.10mm*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 infill_acceleration = 1000 bridge_acceleration = 800 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% perimeters = 3 [print:0.15mm QUALITY @MK3] inherits = *0.15mm*; *MK3* bridge_speed = 25 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% [print:0.15mm SPEED @MK3] inherits = *0.15mm*; *MK3* bridge_speed = 25 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 200 max_print_speed = 200 perimeter_speed = 60 solid_infill_speed = 200 top_solid_infill_speed = 50 [print:0.20mm QUALITY @MK3] inherits = *0.20mm*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 80 max_print_speed = 200 perimeter_speed = 45 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% [print:0.20mm SPEED @MK3] inherits = *0.20mm*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 200 max_print_speed = 200 perimeter_speed = 60 solid_infill_speed = 200 top_solid_infill_speed = 50 [print:0.30mm DRAFT @MK3] inherits = *0.30mm*; *MK3* bottom_solid_layers = 3 bridge_speed = 25 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 85 max_print_speed = 200 perimeter_speed = 50 small_perimeter_speed = 30 solid_infill_speed = 80 top_solid_infill_speed = 40 support_material_speed = 45 external_perimeter_extrusion_width = 0.6 extrusion_width = 0.5 first_layer_extrusion_width = 0.42 infill_extrusion_width = 0.5 perimeter_extrusion_width = 0.5 solid_infill_extrusion_width = 0.5 top_infill_extrusion_width = 0.45 support_material_extrusion_width = 0.38 support_material_contact_distance = 0.2 ## MK3 - MMU2 specific [print:0.15mm SOLUBLE FULL @MK3] inherits = 0.15mm SPEED @MK3; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 perimeter_speed = 40 solid_infill_speed = 40 infill_speed = 80 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 support_material_speed = 45 bridge_flow_ratio = 0.8 bridge_speed = 30 [print:0.15mm SOLUBLE INTERFACE @MK3] inherits = 0.15mm SOLUBLE FULL @MK3 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 [print:0.20mm SOLUBLE FULL @MK3] inherits = 0.20mm SPEED @MK3; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 perimeter_speed = 40 solid_infill_speed = 40 infill_speed = 80 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 support_material_speed = 45 bridge_flow_ratio = 0.95 bridge_speed = 30 [print:0.20mm SOLUBLE INTERFACE @MK3] inherits = 0.20mm SOLUBLE FULL @MK3 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 ## MK3 - 0.25mm nozzle [print:0.05mm ULTRADETAIL @0.25 nozzle MK3] inherits = *0.05mm*; *0.25nozzle*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.07 [print:0.07mm ULTRADETAIL @0.25 nozzle MK3] inherits = *0.07mm*; *0.25nozzle*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 infill_speed = 30 solid_infill_speed = 30 support_material_speed = 30 top_solid_infill_speed = 20 fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.07 [print:0.10mm DETAIL @0.25 nozzle MK3] inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.07 [print:0.15mm QUALITY @0.25 nozzle MK3] inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.08 ## MK3 - 0.6mm nozzle [print:0.15mm DETAIL @0.6 nozzle MK3] inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 support_material_contact_distance = 0.22 bridge_flow_ratio = 1 [print:0.20mm DETAIL @0.6 nozzle MK3] inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 support_material_contact_distance = 0.22 bridge_flow_ratio = 1 [print:0.30mm QUALITY @0.6 nozzle MK3] inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 support_material_contact_distance = 0.25 bridge_flow_ratio = 1 [print:0.35mm SPEED @0.6 nozzle MK3] inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 infill_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 support_material_contact_distance = 0.25 bridge_flow_ratio = 0.95 [print:0.40mm DRAFT @0.6 nozzle MK3] inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_acceleration = 1000 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 infill_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 support_material_contact_distance = 0.25 bridge_flow_ratio = 0.95 ## MK3 - MMU2 specific [print:0.30mm SOLUBLE FULL @0.6 nozzle MK3] inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder support_material_extruder = 5 support_material_interface_extruder = 5 support_material_speed = 40 perimeter_speed = 40 solid_infill_speed = 40 top_infill_extrusion_width = 0.6 support_material_extrusion_width = 0.6 top_solid_infill_speed = 30 support_material_xy_spacing = 80% [print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3] inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3 notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder support_material_extruder = 0 support_material_interface_layers = 3 support_material_with_sheath = 0 ## 0.8mm nozzle - MK2.5 and MK3 ## Only for MMU2 Single mode at the moment [print:0.30mm DETAIL @0.8 nozzle] inherits = *common*; *0.8nozzle* layer_height = 0.30 compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 perimeter_speed = 35 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 50 max_print_speed = 80 solid_infill_speed = 50 top_solid_infill_speed = 35 support_material_speed = 40 [print:0.40mm QUALITY @0.8 nozzle] inherits = *common*; *0.8nozzle* layer_height = 0.4 compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 perimeter_speed = 35 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 50 max_print_speed = 50 solid_infill_speed = 45 top_solid_infill_speed = 35 support_material_speed = 40 [print:0.55mm DRAFT @0.8 nozzle] inherits = *common*; *0.8nozzle* layer_height = 0.55 compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 perimeter_speed = 30 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 50 max_print_speed = 50 solid_infill_speed = 40 support_material_speed = 35 support_material_contact_distance = 0.25 top_solid_infill_speed = 30 external_perimeter_extrusion_width = 1 perimeter_extrusion_width = 1 ## MINI ## # MINI - 0.4mm nozzle [print:0.05mm ULTRADETAIL @MINI] inherits = *0.05mm*; *MINI* fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.4 small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% support_material_speed = 30 support_material_extrusion_width = 0.35 bridge_acceleration = 300 [print:0.07mm ULTRADETAIL @MINI] inherits = *0.07mm*; *MINI* fill_pattern = gyroid fill_density = 15% compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 top_infill_extrusion_width = 0.4 small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% support_material_extrusion_width = 0.35 bridge_acceleration = 300 [print:0.10mm DETAIL @MINI] inherits = *0.10mm*; *MINI* bridge_speed = 20 bridge_acceleration = 700 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 infill_speed = 80 solid_infill_speed = 80 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% perimeters = 3 support_material_xy_spacing = 60% [print:0.15mm QUALITY @MINI] inherits = *0.15mm*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 infill_speed = 80 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% support_material_xy_spacing = 60% [print:0.15mm SPEED @MINI] inherits = *0.15mm*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 external_perimeter_speed = 40 infill_speed = 140 solid_infill_speed = 140 top_solid_infill_speed = 40 support_material_xy_spacing = 60% [print:0.20mm QUALITY @MINI] inherits = *0.20mm*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 infill_speed = 80 solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% support_material_xy_spacing = 60% [print:0.20mm SPEED @MINI] inherits = *0.20mm*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 external_perimeter_speed = 40 infill_speed = 140 max_print_speed = 150 solid_infill_speed = 140 top_solid_infill_speed = 40 support_material_xy_spacing = 60% [print:0.25mm DRAFT @MINI] inherits = *0.25mm*; *MINI* bridge_speed = 25 bridge_flow_ratio = 0.95 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 40 infill_speed = 110 perimeter_speed = 55 small_perimeter_speed = 25 solid_infill_speed = 100 top_solid_infill_speed = 45 first_layer_extrusion_width = 0.42 infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45 top_infill_extrusion_width = 0.4 support_material_xy_spacing = 60% support_material_contact_distance = 0.2 # MINI - 0.25mm nozzle [print:0.05mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.05mm*; *0.25nozzle*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% support_material_speed = 30 support_material_contact_distance = 0.07 [print:0.07mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.07mm*; *0.25nozzle*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 infill_speed = 30 solid_infill_speed = 30 support_material_speed = 30 top_solid_infill_speed = 20 fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.07 [print:0.10mm DETAIL @0.25 nozzle MINI] inherits = *0.10mm*; *0.25nozzleMINI*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.07 [print:0.15mm QUALITY @0.25 nozzle MINI] inherits = *0.15mm*; *0.25nozzleMINI*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.08 # MINI - 0.6mm nozzle [print:0.15mm DETAIL @0.6 nozzle MINI] inherits = *0.15mm*; *0.6nozzleMINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 infill_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 support_material_contact_distance = 0.22 bridge_flow_ratio = 1 [print:0.20mm DETAIL @0.6 nozzle MINI] inherits = *0.20mm*; *0.6nozzleMINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 70 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 70 top_solid_infill_speed = 45 infill_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 support_material_contact_distance = 0.22 bridge_flow_ratio = 1 [print:0.30mm QUALITY @0.6 nozzle MINI] inherits = *0.30mm*; *0.6nozzleMINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 65 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 65 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 support_material_contact_distance = 0.25 bridge_flow_ratio = 1 [print:0.35mm SPEED @0.6 nozzle MINI] inherits = *0.35mm*; *0.6nozzleMINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 60 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 60 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 support_material_contact_distance = 0.25 bridge_flow_ratio = 0.95 [print:0.40mm DRAFT @0.6 nozzle MINI] inherits = *0.40mm*; *0.6nozzleMINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6 external_perimeter_speed = 35 infill_speed = 50 max_print_speed = 100 perimeter_speed = 45 solid_infill_speed = 50 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 infill_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 support_material_contact_distance = 0.25 bridge_flow_ratio = 0.95 # MINI - 0.8mm nozzle [print:0.30mm DETAIL @0.8 nozzle MINI] inherits = 0.30mm DETAIL @0.8 nozzle compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8 perimeter_speed = 35 external_perimeter_speed = 25 infill_acceleration = 1000 infill_speed = 50 max_print_speed = 80 solid_infill_speed = 45 top_solid_infill_speed = 35 support_material_speed = 40 travel_speed = 150 [print:0.40mm QUALITY @0.8 nozzle MINI] inherits = 0.40mm QUALITY @0.8 nozzle compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8 infill_speed = 40 max_print_speed = 50 solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_speed = 40 travel_speed = 150 [print:0.55mm DRAFT @0.8 nozzle MINI] inherits = 0.55mm DRAFT @0.8 nozzle compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8 infill_acceleration = 1000 infill_speed = 40 solid_infill_speed = 40 support_material_speed = 35 support_material_contact_distance = 0.25 top_solid_infill_speed = 28 external_perimeter_extrusion_width = 1 perimeter_extrusion_width = 1 travel_speed = 150 # XXXXXXxxXXXXXXXXXXXXXX # XXX--- filament ---XXX # XXXXXXXXxxXXXXXXXXXXXX [filament:*common*] cooling = 1 compatible_printers = # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_toolchange_delay = 0 filament_cooling_moves = 4 filament_cooling_initial_speed = 2.2 filament_cooling_final_speed = 3.4 filament_load_time = 0 filament_unload_time = 0 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_minimal_purge_on_wipe_tower = 15 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 15 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode" [filament:*PLA*] inherits = *common* bed_temperature = 60 bridge_fan_speed = 100 disable_fan_first_layers = 1 full_fan_speed_layer = 4 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #FF8000 filament_max_volumetric_speed = 15 filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 temperature = 210 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" [filament:*PET*] inherits = *common* bed_temperature = 90 bridge_fan_speed = 50 disable_fan_first_layers = 3 full_fan_speed_layer = 5 fan_always_on = 1 fan_below_layer_time = 20 filament_colour = #FF8000 filament_max_volumetric_speed = 8 filament_type = PETG first_layer_bed_temperature = 85 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" temperature = 240 filament_retract_length = 1 filament_retract_lift = 0.2 compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*PET06*] inherits = *PET* compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_max_volumetric_speed = 15 [filament:*PETMMU1*] # inherits = *PET* filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = 0.2 compatible_printers_condition = printer_model=="MK2SMM" [filament:*PETMINI*] # inherits = *PET* filament_retract_length = nil filament_retract_speed = 40 filament_deretract_speed = 25 filament_retract_lift = nil filament_retract_before_travel = 1 filament_max_volumetric_speed = 7 compatible_printers_condition = printer_model=="MINI" start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" [filament:*PETMINI06*] # inherits = *PET* filament_retract_length = nil filament_retract_speed = 40 filament_deretract_speed = 25 filament_retract_lift = nil filament_retract_before_travel = 1 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.6 start_filament_gcode = "M900 K0.12 ; Filament gcode" filament_max_volumetric_speed = 13 [filament:*ABSMINI*] # inherits = *ABS* bed_temperature = 100 filament_retract_length = 2.7 filament_retract_speed = nil filament_deretract_speed = nil filament_retract_lift = nil filament_retract_before_travel = 3 filament_wipe = 0 filament_max_volumetric_speed = 10 slowdown_below_layer_time = 20 compatible_printers_condition = printer_model=="MINI" start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" [filament:*FLEXMINI*] inherits = *FLEX* first_layer_temperature = 245 temperature = 245 filament_retract_length = 4 filament_retract_speed = 40 filament_deretract_speed = 15 filament_retract_lift = 0 filament_retract_before_travel = 7 filament_wipe = 0 bridge_fan_speed = 80 fan_always_on = 1 cooling = 0 max_fan_speed = 50 min_fan_speed = 50 filament_max_volumetric_speed = 1.35 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" disable_fan_first_layers = 4 full_fan_speed_layer = 6 extrusion_multiplier = 1.15 filament_density = 1.22 filament_colour = #F2F200 start_filament_gcode = "M900 K0 ; Filament gcode" [filament:*ABS*] inherits = *common* bed_temperature = 110 bridge_fan_speed = 25 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #FFF2EC filament_max_volumetric_speed = 11 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_type = ABS first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 20 temperature = 255 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*ABSC*] inherits = *common* bed_temperature = 110 bridge_fan_speed = 25 cooling = 1 disable_fan_first_layers = 4 fan_always_on = 0 fan_below_layer_time = 30 slowdown_below_layer_time = 20 filament_colour = #FFF2EC filament_max_volumetric_speed = 11 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_type = ABS first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 15 min_fan_speed = 15 min_print_speed = 15 temperature = 255 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*FLEX*] inherits = *common* bed_temperature = 50 bridge_fan_speed = 80 # For now, all but selected filaments are disabled for the MMU 2.0 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) cooling = 0 disable_fan_first_layers = 3 extrusion_multiplier = 1.15 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #008000 filament_max_volumetric_speed = 1.5 filament_type = FLEX first_layer_bed_temperature = 50 first_layer_temperature = 240 max_fan_speed = 90 min_fan_speed = 70 start_filament_gcode = "M900 K0"; Filament gcode" temperature = 240 filament_retract_length = 0.8 filament_deretract_speed = 25 filament_retract_lift = 0 filament_wipe = 0 [filament:ColorFabb bronzeFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 80.65 filament_density = 3.9 filament_spool_weight = 236 filament_colour = #804040 filament_max_volumetric_speed = 9 [filament:ColorFabb steelFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 80.65 filament_density = 3.13 filament_spool_weight = 236 filament_colour = #808080 filament_max_volumetric_speed = 8 [filament:ColorFabb copperFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.2 filament_cost = 80.65 filament_density = 3.9 filament_spool_weight = 236 filament_colour = #82603E filament_max_volumetric_speed = 9 [filament:ColorFabb HT] inherits = *PET* filament_vendor = ColorFabb bed_temperature = 110 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 10 filament_cost = 65.66 filament_density = 1.18 filament_spool_weight = 236 first_layer_bed_temperature = 105 first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 temperature = 270 [filament:ColorFabb PLA-PHA] inherits = *PLA* filament_vendor = ColorFabb filament_cost = 54.84 filament_density = 1.24 filament_spool_weight = 236 [filament:ColorFabb woodFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 78.63 filament_density = 1.15 filament_spool_weight = 236 filament_colour = #dfc287 filament_max_volumetric_speed = 9 first_layer_temperature = 200 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 200 filament_retract_lift = 0.2 [filament:ColorFabb corkFill] inherits = *PLA* filament_vendor = ColorFabb compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 78.63 filament_density = 1.18 filament_spool_weight = 236 filament_colour = #634d33 filament_max_volumetric_speed = 6 first_layer_temperature = 220 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 220 filament_retract_lift = 0.2 [filament:ColorFabb XT] inherits = *PET* filament_vendor = ColorFabb filament_cost = 62.90 filament_density = 1.27 filament_spool_weight = 236 first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 270 [filament:ColorFabb XT-CF20] inherits = *PET* filament_vendor = ColorFabb extrusion_multiplier = 1.05 filament_cost = 80.65 filament_density = 1.35 filament_spool_weight = 236 filament_colour = #804040 filament_max_volumetric_speed = 2 first_layer_bed_temperature = 90 first_layer_temperature = 260 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" temperature = 260 filament_retract_length = nil filament_retract_lift = 0.4 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:ColorFabb nGen] inherits = *PET* filament_vendor = ColorFabb filament_cost = 52.46 filament_density = 1.2 filament_spool_weight = 236 bridge_fan_speed = 40 fan_always_on = 0 fan_below_layer_time = 10 filament_type = NGEN first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 [filament:ColorFabb nGen flex] inherits = *FLEX* filament_vendor = ColorFabb filament_cost = 58.30 filament_density = 1 filament_spool_weight = 236 bed_temperature = 85 bridge_fan_speed = 40 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_below_layer_time = 10 filament_max_volumetric_speed = 5 first_layer_bed_temperature = 85 first_layer_temperature = 260 max_fan_speed = 35 min_fan_speed = 20 temperature = 260 filament_retract_length = nil filament_retract_lift = 0 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) [filament:Kimya PETG Carbon] inherits = *PET* filament_vendor = Kimya extrusion_multiplier = 1.05 filament_cost = 150.02 filament_density = 1.317 filament_colour = #804040 filament_max_volumetric_speed = 6 first_layer_bed_temperature = 85 first_layer_temperature = 240 temperature = 240 filament_retract_length = nil filament_retract_lift = 0.3 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Kimya ABS Carbon] inherits = *ABSC* filament_vendor = Kimya filament_cost = 140.34 filament_density = 1.032 filament_colour = #804040 filament_max_volumetric_speed = 6 first_layer_temperature = 260 temperature = 260 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Kimya ABS Kevlar] inherits = Kimya ABS Carbon filament_vendor = Kimya filament_density = 1.037 [filament:E3D Edge] inherits = *PET* filament_vendor = E3D filament_cost = 56.9 filament_density = 1.26 filament_type = EDGE compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:E3D PC-ABS] inherits = *ABS* filament_vendor = E3D filament_cost = 0 filament_type = PC filament_density = 1.05 first_layer_temperature = 270 temperature = 270 [filament:Fillamentum PLA] inherits = *PLA* filament_vendor = Fillamentum filament_cost = 35.48 filament_density = 1.24 filament_spool_weight = 230 [filament:Fillamentum ABS] inherits = *ABSC* filament_vendor = Fillamentum filament_cost = 32.4 filament_density = 1.04 filament_spool_weight = 230 first_layer_temperature = 240 temperature = 240 [filament:Fillamentum ASA] inherits = *ABS* filament_vendor = Fillamentum filament_cost = 38.7 filament_density = 1.07 filament_spool_weight = 230 fan_always_on = 1 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 first_layer_temperature = 260 temperature = 260 filament_type = ASA [filament:Prusament ASA] inherits = *ABS* filament_vendor = Prusa Polymers filament_cost = 42.69 filament_density = 1.07 filament_spool_weight = 201 fan_always_on = 1 first_layer_temperature = 260 first_layer_bed_temperature = 105 temperature = 260 bed_temperature = 110 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 bridge_fan_speed = 30 min_print_speed = 15 slowdown_below_layer_time = 15 disable_fan_first_layers = 4 filament_type = ASA filament_colour = #FFF2EC start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PC Blend] inherits = *ABS* filament_vendor = Prusa Polymers filament_cost = 62.36 filament_density = 1.22 filament_spool_weight = 201 fan_always_on = 0 first_layer_temperature = 275 first_layer_bed_temperature = 110 temperature = 275 bed_temperature = 115 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 bridge_fan_speed = 30 min_print_speed = 15 slowdown_below_layer_time = 20 disable_fan_first_layers = 4 fan_below_layer_time = 30 filament_type = PC filament_colour = #DEE0E6 filament_max_volumetric_speed = 8 filament_retract_lift = 0.2 compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Prusament PC Blend @MK2] inherits = Prusament PC Blend first_layer_bed_temperature = 105 bed_temperature = 110 disable_fan_first_layers = 6 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) [filament:Prusament PC Blend Carbon Fiber] inherits = Prusament PC Blend filament_cost = 90.73 filament_density = 1.16 extrusion_multiplier = 1.04 first_layer_temperature = 285 temperature = 285 disable_fan_first_layers = 4 fan_below_layer_time = 10 filament_colour = #BBBBBB filament_retract_length = nil filament_retract_lift = nil compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material [filament:Prusament PC Blend Carbon Fiber @MK2] inherits = Prusament PC Blend Carbon Fiber first_layer_bed_temperature = 105 bed_temperature = 110 disable_fan_first_layers = 6 compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Fillamentum CPE] inherits = *PET* filament_vendor = Fillamentum filament_cost = 56.45 filament_density = 1.25 filament_spool_weight = 230 filament_type = CPE first_layer_bed_temperature = 90 first_layer_temperature = 275 min_fan_speed = 30 max_fan_speed = 50 disable_fan_first_layers = 3 full_fan_speed_layer = 5 temperature = 275 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Fillamentum Timberfill] inherits = *PLA* filament_vendor = Fillamentum compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 68 filament_density = 1.15 filament_spool_weight = 230 filament_colour = #804040 filament_max_volumetric_speed = 10 first_layer_temperature = 190 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 190 filament_retract_lift = 0.2 [filament:Smartfil Wood] inherits = *PLA* filament_vendor = Smart Materials 3D compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) extrusion_multiplier = 1.1 filament_cost = 68 filament_density = 1.58 filament_colour = #804040 filament_max_volumetric_speed = 9 first_layer_temperature = 220 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 220 filament_retract_lift = 0.2 [filament:Generic ABS] inherits = *ABSC* filament_vendor = Generic filament_cost = 27.82 filament_density = 1.04 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Esun ABS] inherits = *ABSC* filament_vendor = Esun filament_cost = 27.82 filament_density = 1.01 filament_spool_weight = 265 [filament:Hatchbox ABS] inherits = *ABSC* filament_vendor = Hatchbox filament_cost = 27.82 filament_density = 1.04 filament_spool_weight = 245 [filament:Filament PM ABS] inherits = *ABSC* renamed_from = "Plasty Mladec ABS" filament_vendor = Filament PM filament_cost = 27.82 filament_density = 1.08 filament_spool_weight = 230 [filament:Verbatim ABS] inherits = *ABSC* filament_vendor = Verbatim filament_cost = 25.87 filament_density = 1.05 filament_spool_weight = 235 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" [filament:Generic PETG] inherits = *PET* renamed_from = "Generic PET" filament_vendor = Generic filament_cost = 27.82 filament_density = 1.27 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Extrudr DuraPro ASA] inherits = Fillamentum ASA filament_vendor = Extrudr bed_temperature = 90 filament_cost = 25.98 filament_density = 1.05 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120" first_layer_bed_temperature = 90 first_layer_temperature = 220 temperature = 220 filament_max_volumetric_speed = 10 compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_spool_weight = 230 [filament:Extrudr PETG] inherits = *PET* filament_vendor = Extrudr bed_temperature = 70 filament_cost = 35.45 filament_density = 1.29 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=94" first_layer_bed_temperature = 70 first_layer_temperature = 220 temperature = 220 slowdown_below_layer_time = 20 filament_retract_length = nil filament_retract_lift = nil filament_spool_weight = 262 full_fan_speed_layer = 0 compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Extrudr PETG @MINI] inherits = Extrudr PETG; *PETMINI* filament_vendor = Extrudr [filament:Extrudr XPETG CF] inherits = Extrudr PETG filament_cost = 49.99 filament_density = 1.41 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198" first_layer_temperature = 235 temperature = 235 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) filament_spool_weight = 230 [filament:Extrudr XPETG CF @MINI] inherits = Extrudr XPETG CF; *PETMINI* compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Extrudr XPETG Matt] inherits = Extrudr PETG filament_cost = 29.99 filament_density = 1.41 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=199" first_layer_temperature = 230 temperature = 230 [filament:Extrudr XPETG Matt @MINI] inherits = Extrudr XPETG Matt; *PETMINI* [filament:Extrudr BioFusion] inherits = *PLA* filament_vendor = Extrudr disable_fan_first_layers = 3 full_fan_speed_layer = 0 filament_cost = 31.23 filament_density = 1.25 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=121" first_layer_temperature = 220 temperature = 220 max_fan_speed = 45 min_fan_speed = 25 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K43{endif} ; Filament gcode LA 1.0" filament_spool_weight = 230 [filament:Extrudr Flax] inherits = *PLA* filament_vendor = Extrudr filament_cost = 56.23 filament_density = 1.45 filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131" first_layer_temperature = 190 temperature = 190 max_fan_speed = 80 min_fan_speed = 30 full_fan_speed_layer = 0 slowdown_below_layer_time = 20 filament_max_volumetric_speed = 11 filament_spool_weight = 262 [filament:Extrudr GreenTEC] inherits = *PLA* filament_vendor = Extrudr filament_cost = 56 filament_density = 1.3 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=106" first_layer_temperature = 208 temperature = 208 slowdown_below_layer_time = 20 filament_spool_weight = 230 [filament:Extrudr GreenTEC Pro] inherits = *PLA* filament_vendor = Extrudr filament_cost = 56.23 filament_density = 1.35 filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134" temperature = 215 max_fan_speed = 80 min_fan_speed = 30 full_fan_speed_layer = 0 slowdown_below_layer_time = 20 filament_spool_weight = 230 [filament:Extrudr GreenTEC Pro Carbon] inherits = *PLA* filament_vendor = Extrudr filament_cost = 56.23 filament_density = 1.2 filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138" first_layer_temperature = 225 max_fan_speed = 80 min_fan_speed = 30 temperature = 225 full_fan_speed_layer = 0 slowdown_below_layer_time = 20 filament_spool_weight = 230 compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Extrudr PLA NX1] inherits = *PLA* filament_vendor = Extrudr filament_cost = 22.76 filament_density = 1.24 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=97" temperature = 205 bed_temperature = 60 first_layer_temperature = 205 first_layer_bed_temperature = 60 full_fan_speed_layer = 0 max_fan_speed = 90 min_fan_speed = 30 slowdown_below_layer_time = 20 filament_spool_weight = 262 [filament:Extrudr PLA NX2] inherits = Extrudr PLA NX1 filament_cost = 23.63 filament_density = 1.3 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128" [filament:Extrudr Flex Hard] inherits = *FLEX* filament_vendor = Extrudr disable_fan_first_layers = 1 extrusion_multiplier = 1.2 filament_cost = 39.98 filament_density = 1.2 filament_deretract_speed = nil filament_max_volumetric_speed = 3 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115" filament_retract_length = 0.4 filament_wipe = nil filament_spool_weight = 230 slowdown_below_layer_time = 20 [filament:Extrudr Flex Medium] inherits = *FLEX* filament_vendor = Extrudr disable_fan_first_layers = 1 extrusion_multiplier = 1.2 filament_cost = 39.98 filament_density = 1.19 filament_deretract_speed = nil filament_max_volumetric_speed = 2 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115" filament_retract_length = 0.4 filament_wipe = nil filament_spool_weight = 230 slowdown_below_layer_time = 20 [filament:Extrudr Flex SemiSoft] inherits = *FLEX* filament_vendor = Extrudr disable_fan_first_layers = 1 extrusion_multiplier = 1.2 filament_cost = 39.98 filament_density = 1.18 filament_deretract_speed = nil filament_max_volumetric_speed = 1.2 filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115" filament_retract_length = 0.4 filament_wipe = nil filament_spool_weight = 230 slowdown_below_layer_time = 20 [filament:addnorth Adamant S1] inherits = *FLEX* filament_vendor = addnorth disable_fan_first_layers = 3 extrusion_multiplier = 1 filament_cost = filament_density = 1.22 temperature = 250 bed_temperature = 50 first_layer_temperature = 245 first_layer_bed_temperature = 50 slowdown_below_layer_time = 20 min_print_speed = 20 fan_below_layer_time = 15 fan_always_on = 1 cooling = 1 min_fan_speed = 40 max_fan_speed = 70 bridge_fan_speed = 60 filament_deretract_speed = nil filament_max_volumetric_speed = 1.7 filament_retract_length = 0.6 filament_retract_lift = 0.5 filament_spool_weight = 0 filament_retract_restart_extra = 0.1 filament_wipe = nil [filament:addnorth Adura X] inherits = *PET* filament_vendor = addnorth filament_cost = 29.99 filament_density = 1.27 filament_type = NYLON extrusion_multiplier = 0.98 bed_temperature = 60 first_layer_bed_temperature = 60 first_layer_temperature = 265 temperature = 270 fan_always_on = 0 min_fan_speed = 20 max_fan_speed = 40 bridge_fan_speed = 70 slowdown_below_layer_time = 10 min_print_speed = 20 fan_below_layer_time = 10 disable_fan_first_layers = 3 full_fan_speed_layer = 0 filament_retract_length = 1.4 filament_retract_lift = 0.4 filament_max_volumetric_speed = 4 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" filament_spool_weight = 0 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:addnorth Adura X @MINI] inherits = addnorth Adura X filament_retract_length = nil filament_retract_lift = nil filament_retract_speed = 40 filament_deretract_speed = 25 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:addnorth Adura X @MMU1] inherits = addnorth Adura X filament_retract_length = nil filament_retract_lift = nil compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" [filament:addnorth E-PLA] inherits = *PLA* filament_vendor = addnorth filament_cost = 24.99 filament_density = 1.24 extrusion_multiplier = 0.98 temperature = 215 bed_temperature = 60 first_layer_temperature = 215 first_layer_bed_temperature = 60 full_fan_speed_layer = 3 slowdown_below_layer_time = 15 filament_spool_weight = 0 [filament:addnorth ESD-PETG] inherits = *PET* filament_vendor = addnorth filament_cost = 29.99 filament_density = 1.27 extrusion_multiplier = 0.98 bed_temperature = 80 first_layer_bed_temperature = 85 first_layer_temperature = 245 temperature = 265 fan_always_on = 1 min_fan_speed = 15 max_fan_speed = 30 bridge_fan_speed = 35 slowdown_below_layer_time = 10 min_print_speed = 15 fan_below_layer_time = 8 disable_fan_first_layers = 3 full_fan_speed_layer = 0 filament_retract_length = 1.2 filament_retract_lift = 0 filament_max_volumetric_speed = 2 filament_spool_weight = 0 [filament:addnorth ESD-PETG @MINI] inherits = addnorth ESD-PETG filament_retract_length = nil filament_retract_speed = 40 filament_deretract_speed = 25 filament_max_volumetric_speed = 2 compatible_printers_condition = printer_model=="MINI" [filament:addnorth ESD-PETG @MMU1] inherits = addnorth ESD-PETG filament_retract_length = nil filament_max_volumetric_speed = 2 compatible_printers_condition = printer_model=="MK2SMM" [filament:addnorth OBC Polyethylene] inherits = *FLEX* filament_vendor = addnorth disable_fan_first_layers = 3 extrusion_multiplier = 1 filament_cost = 82 filament_density = 1.22 temperature = 200 bed_temperature = 100 first_layer_temperature = 195 first_layer_bed_temperature = 100 slowdown_below_layer_time = 5 fan_below_layer_time = 15 fan_always_on = 1 cooling = 1 min_fan_speed = 20 max_fan_speed = 30 bridge_fan_speed = 40 min_print_speed = 20 filament_max_volumetric_speed = 4 filament_retract_length = nil filament_retract_lift = nil filament_retract_speed = 40 filament_deretract_speed = 25 filament_spool_weight = 0 filament_notes = "Use Magigoo PP bed adhesive or PP packing tape (on a cold printbed)." [filament:addnorth PETG] inherits = *PET* filament_vendor = addnorth filament_cost = 29.99 filament_density = 1.27 bed_temperature = 80 first_layer_bed_temperature = 85 first_layer_temperature = 240 temperature = 250 fan_always_on = 1 min_fan_speed = 15 max_fan_speed = 40 bridge_fan_speed = 50 slowdown_below_layer_time = 10 min_print_speed = 15 fan_below_layer_time = 15 disable_fan_first_layers = 3 full_fan_speed_layer = 0 filament_retract_length = 1.4 filament_max_volumetric_speed = 8 filament_spool_weight = 0 [filament:addnorth PETG @MINI] inherits = addnorth PETG filament_retract_length = nil filament_retract_lift = nil filament_retract_speed = 40 filament_deretract_speed = 25 filament_max_volumetric_speed = 7 compatible_printers_condition = printer_model=="MINI" [filament:addnorth PETG @MMU1] inherits = addnorth PETG filament_retract_length = nil filament_retract_lift = nil filament_max_volumetric_speed = 7 compatible_printers_condition = printer_model=="MK2SMM" [filament:addnorth Rigid X] inherits = *PET* filament_vendor = addnorth filament_cost = 29.99 filament_density = 1.27 extrusion_multiplier = 0.98 bed_temperature = 85 first_layer_bed_temperature = 90 first_layer_temperature = 250 temperature = 260 fan_always_on = 1 min_fan_speed = 20 max_fan_speed = 60 bridge_fan_speed = 70 slowdown_below_layer_time = 10 fan_below_layer_time = 20 min_print_speed = 20 disable_fan_first_layers = 3 full_fan_speed_layer = 0 filament_retract_length = 1.4 filament_max_volumetric_speed = 5 filament_spool_weight = 0 filament_notes = "Please use a nozzle that is resistant to abrasive filaments, like hardened steel." compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:addnorth Rigid X @MINI] inherits = addnorth Rigid X filament_retract_length = nil filament_retract_lift = nil filament_retract_speed = 40 filament_deretract_speed = 25 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:addnorth Rigid X @MMU1] inherits = addnorth Rigid X filament_retract_length = nil filament_retract_lift = nil compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" [filament:addnorth Textura] inherits = *PLA* filament_vendor = addnorth filament_cost = 24.99 filament_density = 1.24 extrusion_multiplier = 0.95 temperature = 215 bed_temperature = 65 first_layer_temperature = 215 first_layer_bed_temperature = 65 min_fan_speed = 20 max_fan_speed = 40 bridge_fan_speed = 60 full_fan_speed_layer = 0 slowdown_below_layer_time = 15 min_print_speed = 20 filament_spool_weight = 0 filament_retract_length = 1 compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:addnorth Textura @MINI] inherits = addnorth Textura filament_retract_length = nil compatible_printers_condition = printer_model=="MINI" [filament:addnorth Textura @MMU1] inherits = addnorth Textura filament_retract_length = nil compatible_printers_condition = printer_model=="MK2SMM" [filament:Filament PM PETG] inherits = *PET* renamed_from = "Plasty Mladec PETG" filament_vendor = Filament PM filament_cost = 27.82 filament_density = 1.27 filament_spool_weight = 230 compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Generic PLA] inherits = *PLA* filament_vendor = Generic filament_cost = 25.4 filament_density = 1.24 compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Devil Design PLA] inherits = *PLA* filament_vendor = Devil Design filament_cost = 20.99 filament_density = 1.24 filament_spool_weight = 250 [filament:Devil Design PETG] inherits = *PET* filament_vendor = Devil Design filament_cost = 20.99 filament_density = 1.23 filament_spool_weight = 250 first_layer_temperature = 230 first_layer_bed_temperature = 85 temperature = 230 bed_temperature = 90 [filament:Spectrum PLA] inherits = *PLA* filament_vendor = Spectrum filament_cost = 21.50 filament_density = 1.24 [filament:Generic FLEX] inherits = *FLEX* filament_vendor = Generic filament_cost = 82 filament_density = 1.22 filament_max_volumetric_speed = 1.2 filament_retract_length = 0 filament_retract_speed = nil filament_retract_lift = nil compatible_printers_condition = nozzle_diameter[0]>0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) [filament:Fillamentum Flexfill 92A] inherits = *FLEX* filament_vendor = Fillamentum filament_cost = 33.99 filament_density = 1.20 filament_spool_weight = 230 filament_max_volumetric_speed = 1.2 filament_retract_length = 0.4 filament_retract_speed = nil filament_deretract_speed = 20 fan_always_on = 1 cooling = 0 max_fan_speed = 60 min_fan_speed = 60 disable_fan_first_layers = 4 full_fan_speed_layer = 6 [filament:AmazonBasics TPU] inherits = *FLEX* filament_vendor = AmazonBasics fan_always_on = 1 filament_max_volumetric_speed = 1.8 extrusion_multiplier = 1.14 first_layer_temperature = 235 first_layer_bed_temperature = 50 temperature = 235 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 80 min_fan_speed = 80 filament_retract_before_travel = 3 filament_cost = 19.99 filament_density = 1.21 filament_retract_length = 2 filament_retract_speed = 45 filament_deretract_speed = 20 filament_retract_lift = 0 filament_wipe = 0 disable_fan_first_layers = 4 full_fan_speed_layer = 6 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 [filament:SainSmart TPU] inherits = *FLEX* filament_vendor = SainSmart fan_always_on = 1 filament_max_volumetric_speed = 2.5 extrusion_multiplier = 1.1 first_layer_temperature = 230 first_layer_bed_temperature = 50 temperature = 230 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 80 min_fan_speed = 80 filament_retract_before_travel = 3 filament_cost = 32.99 filament_density = 1.21 filament_retract_length = 1 filament_retract_speed = nil filament_deretract_speed = 25 filament_retract_lift = 0 filament_wipe = 0 disable_fan_first_layers = 4 full_fan_speed_layer = 6 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 [filament:Filatech FilaFlex40] inherits = *FLEX* filament_vendor = Filatech fan_always_on = 1 filament_max_volumetric_speed = 2.5 extrusion_multiplier = 1.1 first_layer_temperature = 230 first_layer_bed_temperature = 50 temperature = 230 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 50 min_fan_speed = 50 filament_retract_before_travel = 3 filament_cost = 84.68 filament_density = 1.22 filament_retract_length = 2 filament_retract_speed = 50 filament_deretract_speed = 25 filament_retract_lift = 0 filament_wipe = 0 disable_fan_first_layers = 4 full_fan_speed_layer = 6 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 [filament:Polymaker PC-Max] inherits = *ABS* filament_vendor = Polymaker filament_cost = 77.3 filament_density = 1.20 filament_type = PC bed_temperature = 115 filament_colour = #FFF2EC first_layer_bed_temperature = 100 first_layer_temperature = 270 temperature = 270 bridge_fan_speed = 0 filament_max_volumetric_speed = 8 [filament:PrimaSelect PVA+] inherits = *PLA* filament_vendor = PrimaSelect filament_cost = 122.1 filament_density = 1.23 cooling = 0 fan_always_on = 0 filament_colour = #FFFFD7 filament_max_volumetric_speed = 3.8 filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_soluble = 1 filament_type = PVA first_layer_temperature = 195 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 195 [filament:Prusa ABS] inherits = *ABSC* filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.08 filament_spool_weight = 230 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:*ABS MMU2*] inherits = Prusa ABS compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_cooling_final_speed = 50 filament_cooling_initial_speed = 10 filament_cooling_moves = 5 filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"; filament_loading_speed_start = 19 filament_load_time = 15 filament_unload_time = 12 filament_loading_speed = 14 filament_unloading_speed = 20 [filament:Generic ABS @MMU2] inherits = *ABS MMU2* filament_vendor = Generic [filament:Generic HIPS @MMU2] inherits = *ABS MMU2* filament_vendor = Generic filament_cost = 27.3 filament_density = 1.04 fan_always_on = 1 first_layer_temperature = 230 first_layer_bed_temperature = 100 temperature = 230 bed_temperature = 110 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 bridge_fan_speed = 50 min_print_speed = 15 slowdown_below_layer_time = 20 disable_fan_first_layers = 3 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_type = HIPS filament_soluble = 1 filament_colour = #FFFFD7 filament_ramming_parameters = "130 120 2.74194 2.96774 3.25806 3.77419 4.83871 6.3871 8.09677 9.64516 10.7419 11.2903| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 7.13871 1.95 10.2806 2.45 11.4194 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" [filament:Prusament ASA @MMU2] inherits = *ABS MMU2* filament_vendor = Prusa Polymers filament_cost = 42.69 filament_density = 1.07 filament_spool_weight = 201 fan_always_on = 1 first_layer_temperature = 260 first_layer_bed_temperature = 105 temperature = 260 bed_temperature = 110 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 bridge_fan_speed = 30 min_print_speed = 15 slowdown_below_layer_time = 15 disable_fan_first_layers = 4 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_type = ASA filament_colour = #FFF2EC start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" [filament:Prusament PC Blend @MMU2] inherits = *ABS MMU2* filament_vendor = Prusa Polymers filament_cost = 62.36 filament_density = 1.22 filament_spool_weight = 201 fan_always_on = 0 fan_below_layer_time = 30 first_layer_temperature = 265 first_layer_bed_temperature = 105 temperature = 265 bed_temperature = 110 cooling = 1 min_fan_speed = 20 max_fan_speed = 20 bridge_fan_speed = 30 min_print_speed = 15 slowdown_below_layer_time = 20 disable_fan_first_layers = 4 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_max_volumetric_speed = 8 filament_retract_lift = 0.2 filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_type = PC filament_colour = #DEE0E6 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0" [filament:Prusament PC Blend Carbon Fiber @MMU2] inherits = Prusament PC Blend @MMU2 filament_cost = 90.73 filament_density = 1.16 extrusion_multiplier = 1.04 fan_below_layer_time = 10 first_layer_temperature = 280 temperature = 280 disable_fan_first_layers = 4 filament_retract_lift = nil filament_colour = #BBBBBB compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material [filament:Prusa ABS @MMU2] inherits = *ABS MMU2* filament_vendor = Made for Prusa filament_cost = 27.82 filament_spool_weight = 230 [filament:Filament PM ABS @MMU2] inherits = *ABS MMU2* renamed_from = "Plasty Mladec ABS @MMU2" filament_vendor = Filament PM filament_density = 1.08 filament_cost = 27.82 filament_spool_weight = 230 [filament:Prusa HIPS] inherits = *ABS* filament_vendor = Made for Prusa filament_cost = 27.3 filament_density = 1.04 filament_spool_weight = 230 bridge_fan_speed = 50 cooling = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #FFFFD7 filament_soluble = 1 filament_type = HIPS first_layer_temperature = 220 max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 220 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Generic HIPS] inherits = *ABS* filament_vendor = Generic filament_cost = 27.3 filament_density = 1.04 bridge_fan_speed = 50 cooling = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #FFFFD7 filament_soluble = 1 filament_type = HIPS first_layer_temperature = 230 max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 230 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusa PETG] inherits = *PET* renamed_from = "Prusa PET" filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 filament_spool_weight = 230 compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Verbatim PETG] inherits = *PET* filament_vendor = Verbatim filament_cost = 27.90 filament_density = 1.27 filament_spool_weight = 235 compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Fiberlogy PETG] inherits = *PET* filament_vendor = Fiberlogy filament_cost = 21.50 filament_density = 1.27 compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PETG] inherits = *PET* filament_vendor = Prusa Polymers first_layer_temperature = 240 temperature = 250 filament_cost = 36.29 filament_density = 1.27 filament_spool_weight = 201 filament_type = PETG compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusa PETG @0.6 nozzle] inherits = *PET06* renamed_from = "Prusa PET 0.6 nozzle"; "Prusa PETG 0.6 nozzle" filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.27 filament_spool_weight = 230 [filament:Prusament PETG @0.6 nozzle] inherits = *PET06* filament_vendor = Prusa Polymers first_layer_temperature = 240 temperature = 250 filament_cost = 36.29 filament_density = 1.27 filament_spool_weight = 201 filament_type = PETG [filament:Filament PM PETG @0.6 nozzle] inherits = *PET06* renamed_from = "Plasty Mladec PETG @0.6 nozzle" filament_vendor = Filament PM first_layer_temperature = 230 temperature = 240 filament_cost = 27.82 filament_density = 1.27 filament_spool_weight = 230 filament_type = PETG [filament:Devil Design PETG @0.6 nozzle] inherits = *PET06* filament_vendor = Devil Design first_layer_temperature = 230 first_layer_bed_temperature = 85 temperature = 230 bed_temperature = 90 filament_cost = 20.99 filament_density = 1.23 filament_spool_weight = 250 filament_type = PETG [filament:Verbatim PETG @0.6 nozzle] inherits = *PET06* filament_vendor = Verbatim first_layer_temperature = 230 temperature = 240 filament_cost = 27.90 filament_density = 1.27 filament_spool_weight = 235 filament_type = PETG [filament:Fiberlogy PETG @0.6 nozzle] inherits = *PET06* filament_vendor = Fiberlogy first_layer_temperature = 230 temperature = 240 filament_cost = 21.50 filament_density = 1.27 filament_type = PETG [filament:*PET MMU2*] inherits = Prusa PETG compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 230 first_layer_temperature = 230 filament_cooling_final_speed = 1 filament_cooling_initial_speed = 2 filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 120 filament_loading_speed_start = 19 filament_retract_length = 1 filament_retract_lift = 0.2 filament_max_volumetric_speed = 7 [filament:*PET MMU2 06*] inherits = *PET MMU2* compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 13 [filament:Generic PETG @MMU2] inherits = *PET MMU2* renamed_from = "Generic PET MMU2"; "Generic PETG MMU2" filament_vendor = Generic [filament:Filament PM PETG @MMU2] inherits = *PET MMU2* renamed_from = "Plasty Mladec PETG @MMU2" filament_vendor = Filament PM filament_spool_weight = 230 [filament:Prusa PETG @MMU2] inherits = *PET MMU2* renamed_from = "Prusa PET MMU2"; "Prusa PETG MMU2" filament_vendor = Made for Prusa filament_cost = 27.82 filament_spool_weight = 230 [filament:Prusament PETG @MMU2] inherits = *PET MMU2* filament_type = PETG filament_vendor = Prusa Polymers filament_cost = 36.29 filament_density = 1.27 filament_spool_weight = 201 [filament:Generic PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* renamed_from = "Generic PET MMU2 0.6 nozzle"; "Generic PETG MMU2 0.6 nozzle" filament_vendor = Generic [filament:Prusa PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* renamed_from = "Prusa PET MMU2 0.6 nozzle"; "Prusa PETG MMU2 0.6 nozzle" filament_vendor = Made for Prusa filament_spool_weight = 230 [filament:Prusament PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* filament_type = PETG filament_vendor = Prusa Polymers filament_cost = 36.29 filament_density = 1.27 filament_spool_weight = 201 [filament:Filament PM PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* renamed_from = "Plasty Mladec PETG @MMU2 0.6 nozzle" filament_type = PETG filament_vendor = Filament PM filament_spool_weight = 230 [filament:Prusa PLA] inherits = *PLA* filament_vendor = Made for Prusa filament_cost = 27.82 filament_density = 1.24 filament_spool_weight = 230 compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Fiberlogy PLA] inherits = *PLA* filament_vendor = Fiberlogy filament_cost = 25.4 filament_density = 1.24 [filament:Filament PM PLA] inherits = *PLA* renamed_from = "Plasty Mladec PLA" filament_vendor = Filament PM filament_cost = 27.82 filament_density = 1.24 filament_spool_weight = 230 [filament:AmazonBasics PLA] inherits = *PLA* filament_vendor = AmazonBasics filament_cost = 25.4 filament_density = 1.24 [filament:Overture PLA] inherits = *PLA* filament_vendor = Overture filament_cost = 22 filament_density = 1.24 filament_spool_weight = 235 [filament:Hatchbox PLA] inherits = *PLA* filament_vendor = Hatchbox filament_cost = 25.4 filament_density = 1.27 filament_spool_weight = 245 [filament:Esun PLA] inherits = *PLA* filament_vendor = Esun filament_cost = 25.4 filament_density = 1.24 filament_spool_weight = 265 [filament:Das Filament PLA] inherits = *PLA* filament_vendor = Das Filament filament_cost = 25.4 filament_density = 1.24 [filament:EUMAKERS PLA] inherits = *PLA* filament_vendor = EUMAKERS filament_cost = 25.4 filament_density = 1.24 [filament:Floreon3D PLA] inherits = *PLA* filament_vendor = Floreon3D filament_cost = 25.4 filament_density = 1.24 [filament:Prusament PLA] inherits = *PLA* filament_vendor = Prusa Polymers temperature = 215 filament_cost = 30.24 filament_density = 1.24 filament_spool_weight = 201 filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PVB] inherits = *PLA* filament_vendor = Prusa Polymers temperature = 215 bed_temperature = 75 first_layer_bed_temperature = 75 filament_cost = 60.48 filament_density = 1.09 filament_spool_weight = 201 filament_max_volumetric_speed = 8 filament_type = PVB filament_soluble = 1 filament_colour = #FFFF6F compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:*PLA MMU2*] inherits = Prusa PLA compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 205 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_loading_speed_start = 19 filament_minimal_purge_on_wipe_tower = 15 filament_unloading_speed_start = 100 full_fan_speed_layer = 4 [filament:Generic PLA @MMU2] inherits = *PLA MMU2* filament_vendor = Generic [filament:Prusa PLA @MMU2] inherits = *PLA MMU2* filament_vendor = Made for Prusa filament_cost = 27.82 filament_spool_weight = 230 [filament:Prusament PLA @MMU2] inherits = *PLA MMU2* filament_vendor = Prusa Polymers filament_cost = 30.24 filament_density = 1.24 filament_spool_weight = 201 [filament:Prusament PVB @MMU2] inherits = *PLA MMU2* filament_vendor = Prusa Polymers filament_cost = 60.48 filament_density = 1.09 filament_max_volumetric_speed = 8 filament_soluble = 1 filament_type = PVB filament_colour = #FFFF6F filament_spool_weight = 201 slowdown_below_layer_time = 20 filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Fillamentum PLA @MMU2] inherits = *PLA MMU2* filament_vendor = Fillamentum filament_cost = 35.48 filament_density = 1.24 filament_spool_weight = 230 [filament:SemiFlex] inherits = *FLEX* renamed_from = "SemiFlex or Flexfill 98A" filament_vendor = Generic filament_cost = 82.26 filament_density = 1.22 extrusion_multiplier = 1.12 filament_max_volumetric_speed = 1.35 fan_always_on = 1 cooling = 0 max_fan_speed = 30 min_fan_speed = 30 filament_retract_length = nil [filament:Fillamentum Flexfill 98A] inherits = *FLEX* filament_vendor = Fillamentum filament_cost = 82.26 filament_density = 1.23 filament_spool_weight = 230 extrusion_multiplier = 1.12 filament_max_volumetric_speed = 1.35 fan_always_on = 1 cooling = 0 max_fan_speed = 60 min_fan_speed = 60 disable_fan_first_layers = 4 full_fan_speed_layer = 6 filament_retract_length = 1.2 filament_deretract_speed = 20 [filament:Taulman Bridge] inherits = *common* filament_vendor = Taulman filament_cost = 40 filament_density = 1.13 bed_temperature = 90 bridge_fan_speed = 40 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #DEE0E6 filament_max_volumetric_speed = 7 filament_soluble = 0 filament_type = NYLON first_layer_bed_temperature = 60 first_layer_temperature = 240 max_fan_speed = 0 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" temperature = 250 [filament:Fillamentum Nylon FX256] inherits = *common* filament_vendor = Fillamentum filament_cost = 56.99 filament_density = 1.01 filament_spool_weight = 230 bed_temperature = 90 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 6 fan_always_on = 0 fan_below_layer_time = 20 min_print_speed = 15 slowdown_below_layer_time = 20 filament_colour = #DEE0E6 filament_max_volumetric_speed = 6 filament_soluble = 0 filament_type = NYLON first_layer_bed_temperature = 90 first_layer_temperature = 250 max_fan_speed = 0 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{elsif nozzle_diameter[0]==0.8};{else}M900 K48{endif} ; Filament gcode LA 1.0" temperature = 250 [filament:Fiberthree F3 PA Pure Pro] inherits = *common* filament_vendor = Fiberthree filament_cost = 200.84 filament_density = 1.2 bed_temperature = 70 first_layer_bed_temperature = 75 first_layer_temperature = 270 temperature = 270 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 1 fan_below_layer_time = 20 min_print_speed = 15 slowdown_below_layer_time = 10 filament_colour = #DEE0E6 filament_max_volumetric_speed = 5 filament_soluble = 0 filament_type = NYLON max_fan_speed = 20 min_fan_speed = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" filament_retract_length = 2 filament_retract_speed = 40 filament_retract_lift = nil filament_retract_before_travel = 1.5 filament_wipe = 0 compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Fiberthree F3 PA-CF Pro] inherits = *common* filament_vendor = Fiberthree filament_cost = 208.1 filament_density = 1.25 bed_temperature = 70 first_layer_bed_temperature = 75 first_layer_temperature = 275 temperature = 275 bridge_fan_speed = 30 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 min_print_speed = 15 slowdown_below_layer_time = 10 filament_colour = #DEE0E6 filament_max_volumetric_speed = 5 filament_soluble = 0 filament_type = NYLON max_fan_speed = 0 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" filament_retract_length = 2 filament_retract_speed = 40 filament_retract_lift = nil filament_retract_before_travel = 1.5 filament_wipe = 0 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Fiberthree F3 PA-GF Pro] inherits = Fiberthree F3 PA-CF Pro filament_vendor = Fiberthree filament_cost = 205.68 filament_density = 1.27 fan_always_on = 1 max_fan_speed = 15 min_fan_speed = 15 [filament:Taulman T-Glase] inherits = *PET* filament_vendor = Taulman filament_cost = 40 filament_density = 1.27 bridge_fan_speed = 40 cooling = 0 fan_always_on = 0 first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" [filament:Verbatim PLA] inherits = *PLA* filament_vendor = Verbatim filament_cost = 42.99 filament_density = 1.24 filament_spool_weight = 235 [filament:Verbatim BVOH] inherits = *common* filament_vendor = Verbatim filament_cost = 193.58 filament_density = 1.14 filament_spool_weight = 235 bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 filament_max_volumetric_speed = 4 filament_soluble = 1 filament_type = PVA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 100 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 210 [filament:Verbatim BVOH @MMU2] inherits = Verbatim BVOH filament_vendor = Verbatim compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 195 fan_always_on = 1 first_layer_temperature = 200 filament_cooling_final_speed = 1 filament_cooling_initial_speed = 2 filament_max_volumetric_speed = 4 filament_type = PVA filament_cooling_moves = 1 filament_load_time = 15 filament_loading_speed = 14 filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 100 filament_loading_speed_start = 19 [filament:PrimaSelect PVA+ @MMU2] inherits = *common* filament_vendor = PrimaSelect compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 disable_fan_first_layers = 1 fan_always_on = 0 fan_below_layer_time = 100 filament_colour = #FFFFD7 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 4 filament_cooling_moves = 2 filament_cost = 122.1 filament_density = 1.24 filament_diameter = 1.75 filament_load_time = 15 filament_loading_speed = 14 filament_loading_speed_start = 19 filament_max_volumetric_speed = 3.8 filament_minimal_purge_on_wipe_tower = 15 filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6" filament_soluble = 1 filament_toolchange_delay = 0 filament_type = PVA filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 100 first_layer_bed_temperature = 60 first_layer_temperature = 200 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" temperature = 195 [filament:Verbatim PP] inherits = *common* filament_vendor = Verbatim filament_cost = 72 filament_density = 0.89 filament_spool_weight = 235 bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 2 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #DEE0E6 filament_max_volumetric_speed = 5 filament_type = PP first_layer_bed_temperature = 100 first_layer_temperature = 220 max_fan_speed = 100 min_fan_speed = 100 start_filament_gcode = "M900 K0 ; Filament gcode" temperature = 220 ## Filaments MMU1 [filament:ColorFabb HT @MMU1] inherits = ColorFabb HT; *PETMMU1* start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" [filament:ColorFabb XT @MMU1] inherits = ColorFabb XT; *PETMMU1* [filament:ColorFabb XT-CF20 @MMU1] inherits = ColorFabb XT-CF20; *PETMMU1* start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" [filament:ColorFabb nGen @MMU1] inherits = ColorFabb nGen; *PETMMU1* [filament:E3D Edge @MMU1] inherits = E3D Edge; *PETMMU1* [filament:Fillamentum CPE @MMU1] inherits = Fillamentum CPE; *PETMMU1* [filament:Generic PETG @MMU1] inherits = Generic PETG; *PETMMU1* renamed_from = "Generic PET MMU1"; "Generic PETG MMU1" [filament:Devil Design PETG @MMU1] inherits = Devil Design PETG; *PETMMU1* [filament:Filament PM PETG @MMU1] inherits = Filament PM PETG; *PETMMU1* renamed_from = "Plasty Mladec PETG @MMU1" [filament:Verbatim PETG @MMU1] inherits = Verbatim PETG; *PETMMU1* [filament:Fiberlogy PETG @MMU1] inherits = Fiberlogy PETG; *PETMMU1* [filament:Prusa PETG @MMU1] inherits = Prusa PETG; *PETMMU1* renamed_from = "Prusa PET MMU1"; "Prusa PETG MMU1" [filament:Prusament PETG @MMU1] inherits = Prusament PETG; *PETMMU1* [filament:Taulman T-Glase @MMU1] inherits = Taulman T-Glase; *PETMMU1* start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" [filament:Fiberthree F3 PA Pure Pro @MMU1] inherits = Fiberthree F3 PA Pure Pro filament_max_volumetric_speed = 4 filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = nil filament_retract_before_travel = nil filament_wipe = nil compatible_printers_condition = printer_model=="MK2SMM" [filament:Fiberthree F3 PA-CF Pro @MMU1] inherits = Fiberthree F3 PA-CF Pro filament_max_volumetric_speed = 4 filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = nil filament_retract_before_travel = nil filament_wipe = nil compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" [filament:Fiberthree F3 PA-GF Pro @MMU1] inherits = Fiberthree F3 PA-CF Pro @MMU1 filament_vendor = Fiberthree filament_cost = 205.68 filament_density = 1.27 fan_always_on = 1 max_fan_speed = 15 min_fan_speed = 15 [filament:SemiFlex @MMU1] inherits = *FLEX* renamed_from = "SemiFlex or Flexfill 98A @MMU1" filament_vendor = Generic filament_cost = 82.26 filament_density = 1.22 extrusion_multiplier = 1.12 filament_max_volumetric_speed = 1.35 filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = nil compatible_printers_condition = printer_model=="MK2SMM" fan_always_on = 1 cooling = 0 max_fan_speed = 30 min_fan_speed = 30 [filament:Generic FLEX @MMU1] inherits = *FLEX* filament_vendor = Generic filament_cost = 82 filament_density = 1.22 filament_max_volumetric_speed = 1.2 filament_retract_length = 0 filament_retract_speed = nil filament_retract_lift = nil compatible_printers_condition = printer_model=="MK2SMM" ## Filaments MINI [filament:Generic PETG @MINI] inherits = Generic PETG; *PETMINI* renamed_from = "Generic PET MINI"; "Generic PETG MINI" compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 [filament:Devil Design PETG @MINI] inherits = Devil Design PETG; *PETMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Filament PM PETG @MINI] inherits = Filament PM PETG; *PETMINI* renamed_from = "Plasty Mladec PETG @MINI" compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Verbatim PETG @MINI] inherits = Verbatim PETG; *PETMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Fiberlogy PETG @MINI] inherits = Fiberlogy PETG; *PETMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Generic ABS @MINI] inherits = Generic ABS; *ABSMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Fiberthree F3 PA Pure Pro @MINI] inherits = Fiberthree F3 PA Pure Pro filament_max_volumetric_speed = 4 filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = nil filament_retract_before_travel = nil filament_wipe = nil compatible_printers_condition = printer_model=="MINI" [filament:Fiberthree F3 PA-CF Pro @MINI] inherits = Fiberthree F3 PA-CF Pro filament_max_volumetric_speed = 4 filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = nil filament_retract_before_travel = nil filament_wipe = nil compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Fiberthree F3 PA-GF Pro @MINI] inherits = Fiberthree F3 PA-CF Pro @MINI filament_vendor = Fiberthree filament_cost = 205.68 filament_density = 1.27 fan_always_on = 1 max_fan_speed = 15 min_fan_speed = 15 [filament:Kimya ABS Carbon @MINI] inherits = Kimya ABS Carbon; *ABSMINI* filament_max_volumetric_speed = 6 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Kimya ABS Kevlar @MINI] inherits = Kimya ABS Carbon @MINI filament_vendor = Kimya filament_density = 1.037 [filament:Esun ABS @MINI] inherits = Esun ABS; *ABSMINI* [filament:Hatchbox ABS @MINI] inherits = Hatchbox ABS; *ABSMINI* [filament:Filament PM ABS @MINI] inherits = Filament PM ABS; *ABSMINI* renamed_from = "Plasty Mladec ABS @MINI" [filament:Verbatim ABS @MINI] inherits = Verbatim ABS; *ABSMINI* [filament:Prusament PETG @MINI] inherits = Prusament PETG; *PETMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 [filament:Kimya PETG Carbon @MINI] inherits = Kimya PETG Carbon; *PETMINI* filament_max_volumetric_speed = 6 filament_retract_length = nil filament_retract_lift = 0.3 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Prusament PETG @0.6 nozzle MINI] inherits = Prusament PETG; *PETMINI06* [filament:Generic PETG @0.6 nozzle MINI] inherits = Generic PETG; *PETMINI06* renamed_from = "Generic PET 0.6 nozzle MINI"; "Generic PETG 0.6 nozzle MINI" [filament:Devil Design PETG @0.6 nozzle MINI] inherits = Devil Design PETG; *PETMINI06* [filament:Filament PM PETG @0.6 nozzle MINI] inherits = Filament PM PETG; *PETMINI06* renamed_from = "Plasty Mladec PETG @0.6 nozzle MINI" [filament:Verbatim PETG @0.6 nozzle MINI] inherits = Verbatim PETG; *PETMINI06* [filament:Fiberlogy PETG @0.6 nozzle MINI] inherits = Fiberlogy PETG; *PETMINI06* [filament:Prusament ASA @MINI] inherits = Prusament ASA; *ABSMINI* first_layer_bed_temperature = 100 bed_temperature = 100 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Fillamentum Flexfill 98A @MINI] inherits = SemiFlex; *FLEXMINI* filament_vendor = Fillamentum first_layer_temperature = 240 temperature = 240 filament_max_volumetric_speed = 1.35 filament_cost = 82.26 filament_spool_weight = 230 max_fan_speed = 60 min_fan_speed = 60 [filament:Generic FLEX @MINI] inherits = SemiFlex; *FLEXMINI* filament_vendor = Generic fan_always_on = 0 bridge_fan_speed = 80 first_layer_temperature = 240 temperature = 240 filament_retract_length = 3 filament_max_volumetric_speed = 1.35 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:AmazonBasics TPU @MINI] inherits = *FLEXMINI* filament_vendor = AmazonBasics filament_max_volumetric_speed = 1.5 first_layer_temperature = 235 first_layer_bed_temperature = 50 temperature = 235 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 80 min_fan_speed = 80 filament_retract_before_travel = 5 filament_cost = 19.99 filament_density = 1.21 [filament:SainSmart TPU @MINI] inherits = *FLEXMINI* filament_vendor = SainSmart filament_max_volumetric_speed = 1.8 first_layer_temperature = 235 first_layer_bed_temperature = 50 temperature = 235 bed_temperature = 50 bridge_fan_speed = 100 max_fan_speed = 80 min_fan_speed = 80 filament_retract_before_travel = 5 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 filament_cost = 32.99 filament_density = 1.21 [filament:Filatech FilaFlex40 @MINI] inherits = *FLEXMINI* filament_vendor = Filatech filament_max_volumetric_speed = 1.8 fan_always_on = 1 first_layer_temperature = 240 first_layer_bed_temperature = 55 temperature = 240 bed_temperature = 55 filament_retract_length = 4 filament_retract_before_travel = 5 bridge_fan_speed = 80 max_fan_speed = 50 min_fan_speed = 50 min_print_speed = 15 slowdown_below_layer_time = 10 cooling = 1 filament_cost = 84.68 [filament:Fillamentum Flexfill 92A @MINI] inherits = *FLEXMINI* filament_vendor = Fillamentum first_layer_temperature = 245 temperature = 245 filament_retract_length = 3 filament_retract_speed = 40 filament_deretract_speed = 15 filament_retract_lift = 0 filament_retract_before_travel = 7 filament_wipe = 0 filament_density = 1.20 filament_spool_weight = 230 filament_cost = 33.95 bridge_fan_speed = 70 fan_always_on = 1 cooling = 0 max_fan_speed = 60 min_fan_speed = 60 filament_max_volumetric_speed = 1.2 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI" disable_fan_first_layers = 4 extrusion_multiplier = 1.15 start_filament_gcode = "M900 K0 ; Filament gcode" [filament:Fillamentum CPE @MINI] inherits = Fillamentum CPE; *PETMINI* first_layer_temperature = 265 first_layer_bed_temperature = 90 temperature = 265 disable_fan_first_layers = 3 full_fan_speed_layer = 5 [filament:ColorFabb nGen @MINI] inherits = ColorFabb nGen; *PETMINI* [filament:E3D PC-ABS @MINI] inherits = E3D PC-ABS; *ABSMINI* filament_retract_length = nil filament_retract_before_travel = nil filament_wipe = nil [filament:Fillamentum ABS @MINI] inherits = Fillamentum ABS; *ABSMINI* [filament:Fillamentum ASA @MINI] inherits = Fillamentum ASA; *ABSMINI* first_layer_bed_temperature = 100 bed_temperature = 100 [filament:Polymaker PC-Max @MINI] inherits = Polymaker PC-Max; *ABSMINI* filament_max_volumetric_speed = 7 bed_temperature = 100 first_layer_bed_temperature = 100 first_layer_temperature = 270 temperature = 270 filament_retract_length = nil filament_retract_before_travel = nil filament_wipe = nil [filament:Prusament PC Blend @MINI] inherits = Prusament PC Blend; *ABSMINI* first_layer_temperature = 275 first_layer_bed_temperature = 100 temperature = 275 bed_temperature = 100 filament_max_volumetric_speed = 7 filament_retract_length = nil filament_retract_speed = nil filament_deretract_speed = nil filament_retract_lift = nil filament_retract_before_travel = nil filament_wipe = nil compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Prusament PC Blend Carbon Fiber @MINI] inherits = Prusament PC Blend @MINI filament_cost = 90.73 filament_density = 1.16 extrusion_multiplier = 1.04 first_layer_temperature = 280 temperature = 280 disable_fan_first_layers = 4 fan_below_layer_time = 10 filament_max_volumetric_speed = 6.5 filament_colour = #BBBBBB compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 [filament:Prusa ABS @MINI] inherits = Prusa ABS; *ABSMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Generic HIPS @MINI] inherits = Generic HIPS; *ABSMINI* [filament:ColorFabb HT @MINI] inherits = ColorFabb HT; *PETMINI* bed_temperature = 100 first_layer_bed_temperature = 100 min_fan_speed = 15 [filament:ColorFabb XT @MINI] inherits = ColorFabb XT; *PETMINI* first_layer_bed_temperature = 90 [filament:ColorFabb XT-CF20 @MINI] inherits = ColorFabb XT-CF20; *PETMINI* compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 260 [filament:Taulman T-Glase @MINI] inherits = Taulman T-Glase; *PETMINI* [filament:E3D Edge @MINI] inherits = E3D Edge; *PETMINI* [filament:Prusa PETG @MINI] inherits = Prusa PETG; *PETMINI* renamed_from = "Prusa PET MINI"; "Prusa PETG MINI" compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 [filament:Prusa PETG @0.6 nozzle MINI] inherits = Prusa PETG; *PETMINI06* renamed_from = "Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI" ## Filaments 0.8 nozzle [filament:Generic PLA @0.8 nozzle] inherits = Generic PLA first_layer_temperature = 220 temperature = 220 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Generic ABS @0.8 nozzle] inherits = Generic ABS first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 15 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Generic PETG @0.8 nozzle] inherits = Generic PETG first_layer_temperature = 240 temperature = 250 filament_max_volumetric_speed = 20 filament_retract_lift = 0.2 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusa PLA @0.8 nozzle] inherits = Prusa PLA first_layer_temperature = 220 temperature = 220 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusa PETG @0.8 nozzle] inherits = Prusa PETG first_layer_temperature = 240 temperature = 250 filament_max_volumetric_speed = 20 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusa ABS @0.8 nozzle] inherits = Prusa ABS first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 15 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Generic FLEX @0.8 nozzle] inherits = Generic FLEX filament_max_volumetric_speed = 4.3 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) [filament:Generic HIPS @0.8 nozzle] inherits = Generic HIPS first_layer_temperature = 240 temperature = 240 filament_max_volumetric_speed = 15 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PLA @0.8 nozzle] inherits = Prusament PLA first_layer_temperature = 225 temperature = 225 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PETG @0.8 nozzle] inherits = Prusament PETG first_layer_temperature = 250 temperature = 260 filament_max_volumetric_speed = 20 filament_retract_lift = 0.2 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament ASA @0.8 nozzle] inherits = Prusament ASA first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) [filament:Prusament PC Blend @0.8 nozzle] inherits = Prusament PC Blend filament_max_volumetric_speed = 13 filament_retract_lift = 0.25 compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material [filament:Prusament PC Blend Carbon Fiber @0.8 nozzle] inherits = Prusament PC Blend Carbon Fiber filament_max_volumetric_speed = 13 filament_retract_lift = 0.25 compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material [filament:Prusament PC Blend @0.8 nozzle MK2] inherits = Prusament PC Blend @MK2 filament_max_volumetric_speed = 13 filament_retract_lift = 0.25 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material) [filament:Prusament PVB @0.8 nozzle] inherits = Prusament PVB first_layer_temperature = 225 temperature = 225 filament_max_volumetric_speed = 15 compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) slowdown_below_layer_time = 20 ## Filaments 0.8 nozzle MMU2 [filament:Generic HIPS @MMU2 0.8 nozzle] inherits = Generic HIPS @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material [filament:Prusament ASA @MMU2 0.8 nozzle] inherits = Prusament ASA @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material slowdown_below_layer_time = 20 filament_max_volumetric_speed = 14 [filament:Prusament PC Blend @MMU2 0.8 nozzle] inherits = Prusament PC Blend @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 12 [filament:Generic PETG @MMU2 0.8 nozzle] inherits = Generic PETG @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 18 first_layer_temperature = 240 temperature = 240 slowdown_below_layer_time = 20 filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6" [filament:Prusament PETG @MMU2 0.8 nozzle] inherits = Prusament PETG @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 18 first_layer_temperature = 240 temperature = 240 slowdown_below_layer_time = 20 filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6" [filament:Generic PLA @MMU2 0.8 nozzle] inherits = Generic PLA @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 14 first_layer_temperature = 215 temperature = 210 [filament:Prusament PLA @MMU2 0.8 nozzle] inherits = Prusament PLA @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 14 first_layer_temperature = 215 temperature = 210 [filament:Verbatim BVOH @MMU2 0.8 nozzle] inherits = Verbatim BVOH @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 8 [filament:PrimaSelect PVA+ @MMU2 0.8 nozzle] inherits = PrimaSelect PVA+ @MMU2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_max_volumetric_speed = 8 ## Filaments 0.8 nozzle MINI [filament:Generic ABS @0.8 nozzle MINI] inherits = Generic ABS @MINI first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 13 filament_retract_length = 3.2 filament_wipe = nil filament_retract_speed = nil filament_deretract_speed = nil filament_retract_lift = nil filament_retract_before_travel = 2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Generic PETG @0.8 nozzle MINI] inherits = Generic PETG @MINI first_layer_temperature = 240 temperature = 250 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Prusa PETG @0.8 nozzle MINI] inherits = Prusa PETG @MINI first_layer_temperature = 240 temperature = 250 filament_max_volumetric_speed = 15 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Prusa ABS @0.8 nozzle MINI] inherits = Prusa ABS @MINI first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 13 slowdown_below_layer_time = 20 filament_retract_length = 3.2 filament_wipe = nil filament_retract_speed = nil filament_deretract_speed = nil filament_retract_lift = nil filament_retract_before_travel = 2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Generic FLEX @0.8 nozzle MINI] inherits = Generic FLEX @MINI filament_max_volumetric_speed = 4.3 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Prusament PETG @0.8 nozzle MINI] inherits = Prusament PETG @MINI first_layer_temperature = 245 temperature = 255 filament_max_volumetric_speed = 15 filament_retract_lift = 0.25 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Prusament ASA @0.8 nozzle MINI] inherits = Prusament ASA @MINI first_layer_temperature = 265 temperature = 265 filament_max_volumetric_speed = 13 slowdown_below_layer_time = 20 filament_retract_length = 3.2 filament_wipe = nil filament_retract_speed = nil filament_deretract_speed = nil filament_retract_lift = nil filament_retract_before_travel = 2 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Prusament PC Blend @0.8 nozzle MINI] inherits = Prusament PC Blend @MINI filament_max_volumetric_speed = 11 filament_retract_lift = 0.25 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MINI] inherits = Prusament PC Blend Carbon Fiber @MINI filament_max_volumetric_speed = 10 filament_retract_lift = 0.25 slowdown_below_layer_time = 20 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI" [sla_print:*common*] compatible_printers_condition = printer_model=="SL1" layer_height = 0.05 output_filename_format = [input_filename_base].sl1 pad_edge_radius = 0.5 pad_enable = 1 pad_max_merge_distance = 50 pad_wall_height = 0 pad_wall_thickness = 1 pad_wall_slope = 90 slice_closing_radius = 0.005 support_base_diameter = 3 support_base_height = 1 support_critical_angle = 45 support_density_at_45 = 250 support_density_at_horizontal = 500 support_head_front_diameter = 0.4 support_head_penetration = 0.4 support_head_width = 3 support_max_bridge_length = 10 support_minimal_z = 0 support_object_elevation = 5 support_pillar_diameter = 1 support_pillar_connection_mode = zigzag support_pillar_widening_factor = 0 supports_enable = 1 support_small_pillar_diameter_percent = 60% [sla_print:*SL1S*] inherits = *common* support_head_front_diameter = 0.5 support_head_penetration = 0.5 support_pillar_diameter = 1 output_filename_format = [input_filename_base].sl1s compatible_printers_condition = printer_model=="SL1S" # SL1 # [sla_print:0.025 UltraDetail] inherits = *common* layer_height = 0.025 support_head_width = 2 [sla_print:0.035 Detail] inherits = *common* layer_height = 0.035 [sla_print:0.05 Normal] inherits = *common* layer_height = 0.05 [sla_print:0.1 Fast] inherits = *common* layer_height = 0.1 support_head_front_diameter = 0.5 support_head_penetration = 0.5 support_pillar_diameter = 1.3 # SL1S # [sla_print:0.025 UltraDetail @SL1S] inherits = *SL1S* layer_height = 0.025 support_head_width = 3 [sla_print:0.05 Normal @SL1S] inherits = *SL1S* layer_height = 0.05 [sla_print:0.1 Fast @SL1S] inherits = *SL1S* layer_height = 0.1 support_head_front_diameter = 0.6 support_head_penetration = 0.6 ########### Materials [sla_material:*common*] compatible_printers_condition = printer_model=="SL1" compatible_prints_condition = layer_height == 0.05 exposure_time = 12 initial_exposure_time = 45 initial_layer_height = 0.05 material_correction = 1,1,1 material_notes = [sla_material:*common 0.025*] inherits = *common* compatible_prints_condition = layer_height == 0.025 exposure_time = 10 initial_exposure_time = 35 initial_layer_height = 0.025 [sla_material:*common 0.035*] inherits = *common* compatible_prints_condition = layer_height == 0.035 exposure_time = 13 initial_exposure_time = 40 initial_layer_height = 0.035 [sla_material:*common 0.05*] inherits = *common* [sla_material:*common 0.1*] inherits = *common* compatible_prints_condition = layer_height == 0.1 exposure_time = 20 initial_exposure_time = 45 initial_layer_height = 0.1 [sla_material:*0.025_sl1s*] inherits = *common* compatible_prints_condition = layer_height == 0.025 compatible_printers_condition = printer_model=="SL1S" exposure_time = 1.3 initial_exposure_time = 25 initial_layer_height = 0.025 [sla_material:*0.05_sl1s*] inherits = *common* compatible_printers_condition = printer_model=="SL1S" exposure_time = 1.7 initial_exposure_time = 25 [sla_material:*0.1_sl1s*] inherits = *common* compatible_prints_condition = layer_height == 0.1 compatible_printers_condition = printer_model=="SL1S" exposure_time = 2.6 initial_exposure_time = 25 initial_layer_height = 0.1 ########### Materials 0.025 [sla_material:3DM-ABS @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM [sla_material:3DM-Vulcan Gold @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:3DM-TOUGH Clear @0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:3DM-HR Red Wine @0.025] inherits = *common 0.025* exposure_time = 14 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM [sla_material:BlueCast Phrozen Wax @0.025] inherits = *common 0.025* exposure_time = 15 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Castable Wax @0.025] inherits = *common 0.025* exposure_time = 8 initial_exposure_time = 35 material_type = Casting material_vendor = BlueCast [sla_material:BlueCast EcoGray @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 40 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Kera Master Dental @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 45 material_type = Dental material_vendor = BlueCast [sla_material:BlueCast Model Dental Gray @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Dental material_vendor = BlueCast [sla_material:BlueCast X10 @0.025] inherits = *common 0.025* exposure_time = 4 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast [sla_material:DruckWege Type D High Temp @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 20 material_type = Tough material_vendor = DruckWege [sla_material:Esun Bio-Photopolymer Resin White @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:FunToDo Castable Blend Red @0.025] inherits = *common 0.025* exposure_time = 10 initial_exposure_time = 35 material_type = Casting material_vendor = FunToDo [sla_material:FunToDo Snow White @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = FunToDo [sla_material:Harz Labs Basic Resin Red @0.025] inherits = *common 0.025* exposure_time = 10 initial_exposure_time = 20 material_type = Tough material_vendor = Harz Labs [sla_material:Harz Labs Model Resin Cherry @0.025] inherits = *common 0.025* exposure_time = 10 initial_exposure_time = 20 material_type = Tough material_vendor = Harz Labs [sla_material:Harz Labs Model Resin Black @0.025] inherits = *common 0.025* exposure_time = 10 initial_exposure_time = 20 material_type = Tough material_vendor = Harz Labs [sla_material:Harz Labs Dental Cast Red @0.025] inherits = *common 0.025* exposure_time = 10 initial_exposure_time = 20 material_type = Dental material_vendor = Harz Labs [sla_material:Esun Standard Resin Black @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:Photocentric Ash Grey @0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric [sla_material:Resinworks 3D Violet @0.025] inherits = *common 0.025* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D [sla_material:Resinworks 3D Green @0.025] inherits = *common 0.025* exposure_time = 17 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D [sla_material:Monocure 3D Black Rapid Resin @0.025] inherits = *common 0.025* exposure_time = 4 initial_exposure_time = 35 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D Blue Rapid Resin @0.025] inherits = *common 0.025* exposure_time = 4 initial_exposure_time = 35 material_type = Tough material_vendor = Monocure ## Prusa [sla_material:Prusa Orange Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Blue Tough @0.025] ## inherits = *common 0.025* ## exposure_time = 5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Beige Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White Tough @0.025] inherits = *common 0.025* exposure_time = 6.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 15 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Green Dental Casting @0.025] inherits = *common 0.025* exposure_time = 12 initial_exposure_time = 40 material_type = Casting material_vendor = Made for Prusa [sla_material:Prusa Transparent Green Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Clear ABS like @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White ABS like @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey High Tenacity @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Cyan Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Magenta Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Yellow Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Orange-Yellow Teeth Model @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Vibrant Orange Tough @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Rich Black Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Deep Blue Transparent Tough @0.025] inherits = *common 0.025* exposure_time = 5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Yellow Jewelry Casting @0.025] inherits = *common 0.025* exposure_time = 8 initial_exposure_time = 45 material_type = Casting material_vendor = Made for Prusa [sla_material:Siraya Tech Simple Clear @0.025] inherits = *common 0.025* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Blu Clear V2 @0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 30 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Blu Blue @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Fast Grey @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Tenacious @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Easy @0.025] inherits = *common 0.025* exposure_time = 11 initial_exposure_time = 15 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Sculpt @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Fast Black @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:NextDent Model 2.0 Grey @0.025] inherits = *common 0.025* exposure_time = 14 initial_exposure_time = 35 material_type = Dental material_vendor = NextDent [sla_material:NextDent Surgical Guide @0.025] inherits = *common 0.025* exposure_time = 6 initial_exposure_time = 35 material_type = Dental material_vendor = NextDent [sla_material:NextDent Cast Purple @0.025] inherits = *common 0.025* exposure_time = 7 initial_exposure_time = 20 material_type = Casting material_vendor = NextDent [sla_material:MakerJuice Labs Standard Red @0.025] inherits = *common 0.025* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = MakerJuice Labs [sla_material:3DJake High Precision Grey @0.025] inherits = *common 0.025* exposure_time = 8.5 initial_exposure_time = 35 material_type = Tough material_vendor = 3DJake [sla_material:3DJake High Precision Blue @0.025] inherits = *common 0.025* exposure_time = 6.5 initial_exposure_time = 35 material_type = Tough material_vendor = 3DJake [sla_material:Zortrax Black @0.025] inherits = *common 0.025* exposure_time = 4 initial_exposure_time = 35 material_type = Tough material_vendor = Zortrax ########### Materials 0.05 [sla_material:Asiga Denta Model @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Dental material_vendor = Asiga [sla_material:Asiga PlasGRAY @0.05] inherits = *common 0.05* exposure_time = 29 initial_exposure_time = 60 material_type = Tough material_vendor = Asiga [sla_material:Ameralabs AMD 3 LED @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 30 material_type = Tough material_vendor = Ameralabs [sla_material:BlueCast EcoGray @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Kera Master Dental @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 50 material_type = Dental material_vendor = BlueCast [sla_material:BlueCast Model Dental Gray @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Dental material_vendor = BlueCast [sla_material:BlueCast LCD-DLP Original @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 60 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Phrozen Wax @0.05] inherits = *common 0.05* exposure_time = 16 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Castable Wax @0.05] inherits = *common 0.05* exposure_time = 11 initial_exposure_time = 35 material_type = Casting material_vendor = BlueCast [sla_material:BlueCast S+ @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 45 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast X5 @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast X10 @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 100 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast 23LS @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast [sla_material:DruckWege Type D High Temp @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 20 material_type = Tough material_vendor = DruckWege [sla_material:Monocure 3D Black Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D Blue Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D Clear Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 40 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D Grey Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 material_type = Tough material_vendor = Monocure [sla_material:Monocure 3D White Rapid Resin @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = Monocure [sla_material:3DM-HTR140 (high temperature) @0.05] inherits = *common 0.05* exposure_time = 12 initial_exposure_time = 45 material_type = Tough material_vendor = Monocure [sla_material:Esun Bio-Photopolymer Resin White @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:Esun Standard Resin Black @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Esun [sla_material:FunToDo Castable Blend Red @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 35 material_type = Casting material_vendor = FunToDo [sla_material:FunToDo Industrial Blend Unpigmented @0.05] inherits = *common 0.05* exposure_time = 4 initial_exposure_time = 35 material_type = Tough material_vendor = FunToDo [sla_material:FunToDo Snow White @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = FunToDo [sla_material:3DM-ABS @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:3DM-BLACK @0.05] inherits = *common 0.05* exposure_time = 20 initial_exposure_time = 40 material_type = Tough material_vendor = 3DM [sla_material:3DM-DENT @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 45 material_type = Dental material_vendor = 3DM [sla_material:3DM-HR Green @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 40 material_type = Tough material_vendor = 3DM [sla_material:3DM-HR Red Wine @0.05] inherits = *common 0.05* exposure_time = 18 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM [sla_material:3DM-XPRO White @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = 3DM [sla_material:3DM-Vulcan Gold @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:3DM-TOUGH Clear @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = 3DM [sla_material:FunToDo Ash Grey @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 40 material_type = Tough material_vendor = FunToDo [sla_material:Harz Labs Model Resin Cherry @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 20 material_type = Tough material_vendor = Harz Labs [sla_material:Harz Labs Basic Resin Red @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 20 material_type = Tough material_vendor = Harz Labs [sla_material:Harz Labs Model Resin Black @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 20 material_type = Tough material_vendor = Harz Labs [sla_material:Harz Labs Dental Cast Red @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 20 material_type = Dental material_vendor = Harz Labs [sla_material:Resinworks 3D Violet @0.05] inherits = *common 0.05* exposure_time = 17 initial_exposure_time = 30 material_type = Tough material_vendor = Resinworks 3D [sla_material:Resinworks 3D Green @0.05] inherits = *common 0.05* exposure_time = 21 initial_exposure_time = 35 material_type = Tough material_vendor = Resinworks 3D [sla_material:Photocentric Hard Grey @0.05] inherits = *common 0.05* exposure_time = 15 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric [sla_material:Photocentric Ash Grey @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 material_type = Tough material_vendor = Photocentric [sla_material:Siraya Tech Simple Clear @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Blu Clear V2 @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 30 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Blu Blue @0.05] inherits = *common 0.05* exposure_time = 12 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Fast Grey @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Tenacious @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Easy @0.05] inherits = *common 0.05* exposure_time = 12 initial_exposure_time = 15 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Sculpt @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:Siraya Tech Fast Black @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = Siraya Tech [sla_material:NextDent Model 2.0 Grey @0.05] inherits = *common 0.05* exposure_time = 12 initial_exposure_time = 35 material_type = Dental material_vendor = NextDent [sla_material:NextDent Surgical Guide @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Dental material_vendor = NextDent [sla_material:NextDent Cast Purple @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 20 material_type = Casting material_vendor = NextDent [sla_material:NextDent Crown Bridge @0.05] inherits = *common 0.05* exposure_time = 11 initial_exposure_time = 35 material_type = Dental material_vendor = NextDent [sla_material:MakerJuice Labs Standard Red @0.05] inherits = *common 0.05* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = MakerJuice Labs [sla_material:3DJake High Precision Grey @0.05] inherits = *common 0.05* exposure_time = 9 initial_exposure_time = 35 material_type = Tough material_vendor = 3DJake [sla_material:3DJake High Precision Blue @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = 3DJake [sla_material:Dragon Resin Metalshine Metal Grey @0.05] inherits = *common 0.05* exposure_time = 30 initial_exposure_time = 50 material_type = Tough material_vendor = Dragon Resin [sla_material:Dragon Resin Metalshine Dark Brass @0.05] inherits = *common 0.05* exposure_time = 30 initial_exposure_time = 50 material_type = Tough material_vendor = Dragon Resin [sla_material:Dragon Resin Metalshine Brass @0.05] inherits = *common 0.05* exposure_time = 30 initial_exposure_time = 50 material_type = Tough material_vendor = Dragon Resin [sla_material:Zortrax Black @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Zortrax ## Prusa [sla_material:Prusa Beige Tough @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Orange Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey Tough @0.05] inherits = *common 0.05* exposure_time = 8.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Black Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Super Low Odor Beige Tough @0.05] ## inherits = *common 0.05* ## exposure_time = 7.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa ## [sla_material:Prusa Super Low Odor White Tough @0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa ## [sla_material:Prusa Super Low Odor Grey Tough @0.05] ## inherits = *common 0.05* ## exposure_time = 6.5 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Cyan Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Magenta Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Super Low Odor Yellow Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Black High Tenacity @0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa [sla_material:Prusa Orange-Yellow Teeth Model @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Green Dental Casting @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 50 material_type = Casting material_vendor = Made for Prusa ## [sla_material:Prusa Yellow Solid @0.05] ## inherits = *common 0.05* ## exposure_time = 7 ## initial_exposure_time = 35 [sla_material:Prusa White Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Green Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Red Tough @0.05] inherits = *common 0.05* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.05] inherits = *common 0.05* exposure_time = 7.5 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Blue Tough @0.05] ## inherits = *common 0.05* ## exposure_time = 8 ## initial_exposure_time = 35 ## material_type = Tough ## material_vendor = Made for Prusa [sla_material:Prusa Transparent Tough @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 15 material_type = Tough material_vendor = Made for Prusa ## [sla_material:Prusa Yellow Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 [sla_material:Prusa Transparent Flexible @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 15 material_type = Flexible material_vendor = Made for Prusa ## [sla_material:Prusa White Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 [sla_material:Prusa Blue Flexible @0.05] inherits = *common 0.05* exposure_time = 5 initial_exposure_time = 15 material_type = Flexible material_vendor = Made for Prusa ## [sla_material:Prusa Black Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 ## [sla_material:Prusa Red Flexible @0.05] ## inherits = *common 0.05* ## exposure_time = 9 ## initial_exposure_time = 35 [sla_material:Prusa Clear ABS like @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White ABS like @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Yellow Jewelry Casting @0.05] inherits = *common 0.05* exposure_time = 13 initial_exposure_time = 45 material_type = Casting material_vendor = Made for Prusa [sla_material:Prusa Grey High Tenacity @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 30 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Vibrant Orange Tough @0.05] inherits = *common 0.05* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Rich Black Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Deep Blue Transparent Tough @0.05] inherits = *common 0.05* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ########### Materials 0.035 [sla_material:Prusa Orange Tough @0.035] inherits = *common 0.035* exposure_time = 6 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ########### Materials 0.1 [sla_material:BlueCast EcoGray @0.1] inherits = *common 0.1* exposure_time = 10 initial_exposure_time = 35 material_type = Tough material_vendor = BlueCast [sla_material:BlueCast Kera Master Dental @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 50 material_type = Tough material_vendor = BlueCast ## Prusa [sla_material:Prusa Orange Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Beige Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 45 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Black Tough @0.1] inherits = *common 0.1* exposure_time = 13 initial_exposure_time = 55 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Transparent Tough @0.1] inherits = *common 0.1* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Green Dental Casting @0.1] inherits = *common 0.1* exposure_time = 15 initial_exposure_time = 50 material_type = Casting material_vendor = Made for Prusa [sla_material:Prusa Transparent Green Tough @0.1] inherits = *common 0.1* exposure_time = 7 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Vibrant Orange Tough @0.1] inherits = *common 0.1* exposure_time = 8 initial_exposure_time = 35 material_type = Tough material_vendor = Made for Prusa ## SL1S materials ## ## 0.025 SL1S [sla_material:Prusa Orange Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White ABS like @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Black Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Cyan Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Magenta Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey Tough @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Blue Flexible @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Flexible material_vendor = Made for Prusa [sla_material:Prusa Grey High Tenacity @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:3DM-ABS Orange @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:3DM-TOUGH Clear @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:Peopoly Deft White @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Peopoly [sla_material:Peopoly Neo Clear @0.025 SL1S] inherits = *0.025_sl1s* exposure_time = 1.8 initial_exposure_time = 25 material_type = Tough material_vendor = Peopoly ## 0.05 SL1S [sla_material:Prusa Orange Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White ABS like @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Black Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2.4 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Cyan Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Magenta Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2.4 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Blue Flexible @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Flexible material_vendor = Made for Prusa [sla_material:Prusa Grey Tough @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2.4 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey High Tenacity @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:3DM-ABS Orange @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:3DM-TOUGH Clear @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:Peopoly Deft White @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Peopoly [sla_material:Peopoly Neo Clear @0.05 SL1S] inherits = *0.05_sl1s* exposure_time = 2 initial_exposure_time = 25 material_type = Tough material_vendor = Peopoly ## 0.1 SL1S [sla_material:Prusa Orange Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White ABS like @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Azure Blue Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Black Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 3 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Cyan Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Magenta Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Maroon Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 3 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa White Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Pink Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Blue Flexible @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Flexible material_vendor = Made for Prusa [sla_material:Prusa Grey Tough @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 3 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:Prusa Grey High Tenacity @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Made for Prusa [sla_material:3DM-ABS Orange @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 3 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:3DM-TOUGH Clear @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 3 initial_exposure_time = 25 material_type = Tough material_vendor = 3DM [sla_material:Peopoly Deft White @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Peopoly [sla_material:Peopoly Neo Clear @0.1 SL1S] inherits = *0.1_sl1s* exposure_time = 2.6 initial_exposure_time = 25 material_type = Tough material_vendor = Peopoly [printer:*common*] printer_technology = FFF bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n between_objects_gcode = deretract_speed = 0 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors extruder_offset = 0x0 gcode_flavor = marlin silent_mode = 0 remaining_times = 1 machine_max_acceleration_e = 10000 machine_max_acceleration_extruding = 2000 machine_max_acceleration_retracting = 1500 machine_max_acceleration_x = 9000 machine_max_acceleration_y = 9000 machine_max_acceleration_z = 500 machine_max_feedrate_e = 120 machine_max_feedrate_x = 500 machine_max_feedrate_y = 500 machine_max_feedrate_z = 12 machine_max_jerk_e = 2.5 machine_max_jerk_x = 10 machine_max_jerk_y = 10 machine_max_jerk_z = 0.2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] max_layer_height = 0.25 min_layer_height = 0.07 max_print_height = 200 nozzle_diameter = 0.4 octoprint_apikey = octoprint_host = printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n printer_settings_id = retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 0.8 retract_length_toolchange = 4 retract_lift = 0.4 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-2 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 printer_model = MK2S printer_variant = 0.4 default_print_profile = 0.15mm OPTIMAL default_filament_profile = Prusament PLA [printer:*multimaterial*] inherits = *common* deretract_speed = 50 retract_before_travel = 3 retract_before_wipe = 60% retract_layer_change = 0 retract_length = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 80 parking_pos_retraction = 92 cooling_tube_length = 5 cooling_tube_retraction = 91.5 single_extruder_multi_material = 1 variable_layer_height = 1 printer_model = MK2SMM [printer:*mm-single*] inherits = *multimaterial* end_gcode = G1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n\n printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100\nM92 E140\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\nG92 E0 default_print_profile = 0.15mm OPTIMAL [printer:*mm-multi*] inherits = *multimaterial* high_current_on_filament_swap = 1 end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259 nozzle_diameter = 0.4,0.4,0.4,0.4 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\n{endif}\nG92 E0 default_print_profile = 0.15mm OPTIMAL # XXXXXXXXXXXXXXXXX # XXX--- MK2 ---XXX # XXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2S] inherits = *common* [printer:Original Prusa i3 MK2S 0.25 nozzle] inherits = *common* max_layer_height = 0.15 min_layer_height = 0.05 nozzle_diameter = 0.25 retract_length = 1 retract_speed = 50 variable_layer_height = 1 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle [printer:Original Prusa i3 MK2S 0.6 nozzle] inherits = *common* max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle # XXXXXXXXXXXXXXXXXXX # XXX--- MK2MM ---XXX # XXXXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2S MMU1 Single] inherits = *mm-single* max_layer_height = 0.25 min_layer_height = 0.07 [printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle] inherits = *mm-single* nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 [printer:Original Prusa i3 MK2S MMU1] inherits = *mm-multi* nozzle_diameter = 0.4,0.4,0.4,0.4 max_layer_height = 0.25 min_layer_height = 0.07 [printer:Original Prusa i3 MK2S MMU1 0.6 nozzle] inherits = *mm-multi* nozzle_diameter = 0.6,0.6,0.6,0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle max_layer_height = 0.35 min_layer_height = 0.1 # XXXXXXXXXXXXXXXXXXX # XXX--- MK2.5 ---XXX # XXXXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK2.5] inherits = Original Prusa i3 MK2S printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.25 nozzle] inherits = Original Prusa i3 MK2S 0.25 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.6 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.8 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 nozzle_diameter = 0.8 printer_variant = 0.8 max_layer_height = 0.6 min_layer_height = 0.2 retract_length = 1 remaining_times = 1 machine_max_jerk_e = 4.5 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle [printer:Original Prusa i3 MK2.5 MMU2 Single] inherits = *25mm2* printer_model = MK2.5MMU2 single_extruder_multi_material = 0 max_print_height = 200 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; load to nozzle\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.20 F1000\nG1 X5 E4 F1000\nG92 E0\n end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2] inherits = *25mm2* printer_model = MK2.5MMU2 max_print_height = 200 default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S] inherits = Original Prusa i3 MK2.5 printer_model = MK2.5S [printer:Original Prusa i3 MK2.5S 0.25 nozzle] inherits = Original Prusa i3 MK2.5 0.25 nozzle printer_model = MK2.5S [printer:Original Prusa i3 MK2.5S 0.6 nozzle] inherits = Original Prusa i3 MK2.5 0.6 nozzle printer_model = MK2.5S [printer:Original Prusa i3 MK2.5S 0.8 nozzle] inherits = Original Prusa i3 MK2.5 0.8 nozzle printer_model = MK2.5S [printer:Original Prusa i3 MK2.5S MMU2S Single] inherits = *25mm2s* printer_model = MK2.5SMMU2S single_extruder_multi_material = 0 max_print_height = 200 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n max_layer_height = 0.6 min_layer_height = 0.2 nozzle_diameter = 0.8 printer_variant = 0.8 retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle [printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle [printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n max_layer_height = 0.15 min_layer_height = 0.05 nozzle_diameter = 0.25 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n [printer:Original Prusa i3 MK2.5S MMU2S] inherits = *25mm2s* printer_model = MK2.5SMMU2S max_print_height = 200 default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle [printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK2.5 MMU2 nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle ## 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. ## [printer:Original Prusa i3 MK2.5S MMU2S 0.8 nozzle] ## inherits = Original Prusa i3 MK2.5S MMU2S ## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 ## retract_length = 1 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n ## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle] ## inherits = Original Prusa i3 MK2.5 MMU2 ## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 ## retract_length = 1 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n # XXXXXXXXXXXXXXXXX # XXX--- MK3 ---XXX # XXXXXXXXXXXXXXXXX [printer:Original Prusa i3 MK3] inherits = *common* end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_x = 1000,960 machine_max_acceleration_y = 1000,960 machine_max_acceleration_z = 200,200 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 200,100 machine_max_feedrate_y = 200,100 machine_max_feedrate_z = 12,12 machine_max_jerk_e = 4.5,4.5 machine_max_jerk_x = 8,8 machine_max_jerk_y = 8,8 machine_max_jerk_z = 0.4,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 silent_mode = 1 remaining_times = 1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n retract_lift_below = 209 max_print_height = 210 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} printer_model = MK3 default_print_profile = 0.15mm QUALITY @MK3 [printer:Original Prusa i3 MK3 0.25 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 0.6 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 0.8 nozzle] inherits = Original Prusa i3 MK3 nozzle_diameter = 0.8 max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle [printer:Original Prusa i3 MK3S & MK3S+] inherits = Original Prusa i3 MK3 renamed_from = "Original Prusa i3 MK3S" printer_model = MK3S [printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle] inherits = Original Prusa i3 MK3 0.25 nozzle renamed_from = "Original Prusa i3 MK3S 0.25 nozzle" printer_model = MK3S [printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle] inherits = Original Prusa i3 MK3 0.6 nozzle renamed_from = "Original Prusa i3 MK3S 0.6 nozzle" printer_model = MK3S [printer:Original Prusa i3 MK3S & MK3S+ 0.8 nozzle] inherits = Original Prusa i3 MK3 0.8 nozzle printer_model = MK3S [printer:*mm2*] inherits = Original Prusa i3 MK3 single_extruder_multi_material = 1 cooling_tube_length = 10 cooling_tube_retraction = 30 parking_pos_retraction = 85 retract_length_toolchange = 0 extra_loading_move = -13 printer_model = MK3MMU2 default_print_profile = 0.15mm QUALITY @MK3 default_filament_profile = Prusament PLA @MMU2 [printer:*mm2s*] inherits = Original Prusa i3 MK3 single_extruder_multi_material = 1 cooling_tube_length = 20 cooling_tube_retraction = 40 parking_pos_retraction = 85 retract_length_toolchange = 0 extra_loading_move = -25 printer_model = MK3SMMU2S default_print_profile = 0.15mm QUALITY @MK3 default_filament_profile = Prusament PLA @MMU2 [printer:*25mm2*] inherits = Original Prusa i3 MK2.5 single_extruder_multi_material = 1 cooling_tube_length = 10 cooling_tube_retraction = 30 parking_pos_retraction = 85 retract_length_toolchange = 0 extra_loading_move = -13 default_filament_profile = Prusament PLA @MMU2 [printer:*25mm2s*] inherits = Original Prusa i3 MK2.5S single_extruder_multi_material = 1 cooling_tube_length = 20 cooling_tube_retraction = 40 parking_pos_retraction = 85 retract_length_toolchange = 0 extra_loading_move = -25 default_filament_profile = Prusament PLA @MMU2 [printer:Original Prusa i3 MK3 MMU2 Single] inherits = *mm2* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single single_extruder_multi_material = 0 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle single_extruder_multi_material = 0 nozzle_diameter = 0.8 max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle [printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single single_extruder_multi_material = 0 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F1000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2] inherits = *mm2* machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single] inherits = *mm2s* renamed_from = "Original Prusa i3 MK3S MMU2S Single" single_extruder_multi_material = 0 default_filament_profile = Prusament PLA start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.6 nozzle" single_extruder_multi_material = 0 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle single_extruder_multi_material = 0 nozzle_diameter = 0.8 max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.25 nozzle" single_extruder_multi_material = 0 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S] inherits = *mm2s* renamed_from = "Original Prusa i3 MK3S MMU2S" machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n ## 0.6mm nozzle MMU2/S printer profiles [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S renamed_from = "Original Prusa i3 MK3S MMU2S 0.6 nozzle" nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 ## 0.8mm nozzle MMU2/S printer profiles ## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. ## [printer:Original Prusa i3 MK3 MMU2 0.8 nozzle] ## inherits = Original Prusa i3 MK3 MMU2 ## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 ## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle] ## inherits = Original Prusa i3 MK3S & MK3S+ MMU2S ## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8 ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 ## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## MINI [printer:Original Prusa MINI & MINI+] inherits = *common* renamed_from = "Original Prusa MINI" printer_model = MINI printer_technology = FFF printer_variant = 0.4 printer_vendor = thumbnails = 16x16,220x124 bed_shape = 0x0,180x0,180x180,0x180 default_filament_profile = "Prusament PLA" default_print_profile = 0.15mm QUALITY @MINI gcode_flavor = marlin2 machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 1250 machine_max_acceleration_retracting = 1250 machine_max_acceleration_travel = 2500 machine_max_acceleration_x = 2500 machine_max_acceleration_y = 2500 machine_max_acceleration_z = 400 machine_max_feedrate_e = 80 machine_max_feedrate_x = 180 machine_max_feedrate_y = 180 machine_max_feedrate_z = 12 machine_max_jerk_e = 10 machine_max_jerk_x = 8 machine_max_jerk_y = 8 machine_max_jerk_z = 2 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 max_layer_height = 0.25 max_print_height = 180 min_layer_height = 0.07 nozzle_diameter = 0.4 retract_length = 3.2 retract_lift = 0.2 retract_speed = 70 deretract_speed = 40 wipe = 1 retract_before_wipe = 70% retract_before_travel = 1.5 retract_lift_above = 0 retract_lift_below = 179 retract_layer_change = 1 silent_mode = 0 remaining_times = 1 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n extruder_colour = [printer:Original Prusa MINI & MINI+ 0.25 nozzle] inherits = Original Prusa MINI & MINI+ renamed_from = "Original Prusa MINI 0.25 nozzle" printer_variant = 0.25 nozzle_diameter = 0.25 max_layer_height = 0.15 min_layer_height = 0.05 default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI retract_length = 3 retract_lift = 0.15 retract_before_travel = 1 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow [printer:Original Prusa MINI & MINI+ 0.6 nozzle] inherits = Original Prusa MINI & MINI+ renamed_from = "Original Prusa MINI 0.6 nozzle" printer_variant = 0.6 nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI retract_length = 3.5 retract_before_travel = 1.5 [printer:Original Prusa MINI & MINI+ 0.8 nozzle] inherits = Original Prusa MINI & MINI+ printer_variant = 0.8 nozzle_diameter = 0.8 max_layer_height = 0.55 min_layer_height = 0.2 default_print_profile = 0.40mm QUALITY @0.8 nozzle MINI default_filament_profile = Prusament PLA @0.8 nozzle retract_length = 3.5 retract_before_travel = 1.5 [printer:Original Prusa SL1] printer_technology = SLA printer_model = SL1 printer_variant = default default_sla_material_profile = Prusa Orange Tough @0.05 default_sla_print_profile = 0.05 Normal thumbnails = 400x400,800x480 bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02 display_height = 68.04 display_orientation = portrait display_pixels_x = 2560 display_pixels_y = 1440 display_width = 120.96 max_print_height = 150 min_exposure_time = 1 max_exposure_time = 120 min_initial_exposure_time = 1 max_initial_exposure_time = 300 printer_correction = 1,1,1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n [printer:Original Prusa SL1S SPEED] printer_technology = SLA printer_model = SL1S printer_variant = default default_sla_material_profile = Prusa Orange Tough @0.05 SL1S default_sla_print_profile = 0.05 Normal @SL1S thumbnails = 400x400,800x480 bed_shape = 0.5x0.5,127.5x0.5,127.5x80.5,0.5x80.5 display_height = 81 display_mirror_x = 1 display_mirror_y = 0 display_orientation = portrait display_pixels_x = 2560 display_pixels_y = 1620 display_width = 128 elefant_foot_compensation = 0.2 elefant_foot_min_width = 0.2 fast_tilt_time = 2.5 slow_tilt_time = 5 gamma_correction = 1 max_print_height = 150 min_exposure_time = 1 max_exposure_time = 120 min_initial_exposure_time = 1 max_initial_exposure_time = 300 printer_correction = 1,1,1 relative_correction = 1,1 area_fill = 45 # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer. [obsolete_presets] print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2" filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"