@setlocal disableDelayedExpansion enableExtensions @IF "%PS_ECHO_ON%" NEQ "" (echo on) ELSE (echo off) @GOTO :MAIN :HELP @ECHO. @ECHO Performs initial build or rebuild of the app (build) and deps (build/deps). @ECHO Default options are determined from build directories and system state. @ECHO. @ECHO Usage: build_win [-ARCH ^<arch^>] [-CONFIG ^<config^>] [-DESTDIR ^<directory^>] @ECHO [-STEPS ^<all^|all-dirty^|app^|app-dirty^|deps^|deps-dirty^>] @ECHO [-RUN ^<console^|custom^|none^|viewer^|window^>] @ECHO. @ECHO -a -ARCH Target processor architecture @ECHO Default: %PS_ARCH_HOST% @ECHO -c -CONFIG MSVC project config @ECHO Default: %PS_CONFIG_DEFAULT% @ECHO -s -STEPS Performs only the specified build steps: @ECHO all - clean and build deps and app @ECHO all-dirty - build deps and app without cleaning @ECHO app - clean and build main applications @ECHO app-dirty - build main applications without cleaning @ECHO deps - clean and build deps @ECHO deps-dirty - build deps without cleaning @ECHO Default: %PS_STEPS_DEFAULT% @ECHO -r -RUN Specifies what to perform at the run step: @ECHO console - run and wait on prusa-slicer-console.exe @ECHO custom - run and wait on your custom build/%PS_CUSTOM_RUN_FILE% @ECHO ide - open project in Visual Studio if not open (no wait) @ECHO none - run step does nothing @ECHO viewer - run prusa-gcodeviewer.exe (no wait) @ECHO window - run prusa-slicer.exe (no wait) @ECHO Default: none @ECHO -d -DESTDIR Deps destination directory @ECHO Warning: Changing destdir path will not delete the old destdir. @ECHO Default: %PS_DESTDIR_DEFAULT_MSG% @ECHO. @ECHO Examples: @ECHO. @ECHO Initial build: build_win -d "c:\src\PrusaSlicer-deps" @ECHO Build post deps change: build_win -s all @ECHO App dirty build: build_win @ECHO App dirty build ^& run: build_win -r console @ECHO All clean build ^& run: build_win -s all -r console -d "deps\build\out_deps" @ECHO. GOTO :END :MAIN REM Script constants SET START_TIME=%TIME% SET PS_START_DIR=%CD% SET PS_SOLUTION_NAME=PrusaSlicer SET PS_CHOICE_TIMEOUT=30 SET PS_CUSTOM_RUN_FILE=custom_run.bat SET PS_DEPS_PATH_FILE_NAME=.DEPS_PATH.txt SET PS_DEPS_PATH_FILE=%~dp0deps\build\%PS_DEPS_PATH_FILE_NAME% SET PS_CONFIG_LIST="Debug;MinSizeRel;Release;RelWithDebInfo" REM Probe build directories and system state for reasonable default arguments pushd %~dp0 SET PS_CONFIG=RelWithDebInfo SET PS_ARCH=%PROCESSOR_ARCHITECTURE:amd64=x64% CALL :TOLOWER PS_ARCH SET PS_RUN=none SET PS_DESTDIR= CALL :RESOLVE_DESTDIR_CACHE REM Set up parameters used by help menu SET PS_CONFIG_DEFAULT=%PS_CONFIG% SET PS_ARCH_HOST=%PS_ARCH% (echo " -help /help -h /h -? /? ")| findstr /I /C:" %~1 ">nul && GOTO :HELP REM Parse arguments SET EXIT_STATUS=1 SET PS_CURRENT_STEP=arguments SET PARSER_STATE= SET PARSER_FAIL= FOR %%I in (%*) DO CALL :PARSE_OPTION "ARCH CONFIG DESTDIR STEPS RUN" PARSER_STATE "%%~I" IF "%PARSER_FAIL%" NEQ "" ( @ECHO ERROR: Invalid switch: %PARSER_FAIL% 1>&2 GOTO :HELP )ELSE IF "%PARSER_STATE%" NEQ "" ( @ECHO ERROR: Missing parameter for: %PARSER_STATE% 1>&2 GOTO :HELP ) REM Validate arguments SET PS_ASK_TO_CONTINUE= CALL :TOLOWER PS_ARCH SET PS_ARCH=%PS_ARCH:amd64=x64% CALL :PARSE_OPTION_VALUE %PS_CONFIG_LIST:;= % PS_CONFIG IF "%PS_CONFIG%" EQU "" GOTO :HELP REM RESOLVE_DESTDIR_CACHE must go after PS_ARCH and PS_CONFIG, but before PS STEPS CALL :RESOLVE_DESTDIR_CACHE IF "%PS_STEPS%" EQU "" SET PS_STEPS=%PS_STEPS_DEFAULT% CALL :PARSE_OPTION_VALUE "all all-dirty deps-dirty deps app-dirty app app-cmake" PS_STEPS IF "%PS_STEPS%" EQU "" GOTO :HELP (echo %PS_STEPS%)| findstr /I /C:"dirty">nul && SET PS_STEPS_DIRTY=1 || SET PS_STEPS_DIRTY= IF "%PS_STEPS%" EQU "app-cmake" SET PS_STEPS_DIRTY=1 IF "%PS_DESTDIR%" EQU "" SET PS_DESTDIR=%PS_DESTDIR_CACHED% IF "%PS_DESTDIR%" EQU "" ( @ECHO ERROR: Parameter required: -DESTDIR 1>&2 GOTO :HELP ) CALL :CANONICALIZE_PATH PS_DESTDIR "%PS_START_DIR%" IF "%PS_DESTDIR%" NEQ "%PS_DESTDIR_CACHED%" ( (echo "all deps all-dirty deps-dirty")| findstr /I /C:"%PS_STEPS%">nul || ( IF EXIST "%PS_DESTDIR%" ( @ECHO WARNING: DESTDIR does not match cache: 1>&2 @ECHO WARNING: new: %PS_DESTDIR% 1>&2 @ECHO WARNING: old: %PS_DESTDIR_CACHED% 1>&2 SET PS_ASK_TO_CONTINUE=1 ) ELSE ( @ECHO ERROR: Invalid parameter: DESTDIR=%PS_DESTDIR% 1>&2 GOTO :HELP ) ) ) SET PS_DESTDIR_DEFAULT_MSG= CALL :PARSE_OPTION_VALUE "console custom ide none viewer window" PS_RUN IF "%PS_RUN%" EQU "" GOTO :HELP IF "%PS_RUN%" NEQ "none" IF "%PS_STEPS:~0,4%" EQU "deps" ( @ECHO ERROR: RUN=%PS_RUN% specified with STEPS=%PS_STEPS% @ECHO ERROR: RUN=none is the only valid option for STEPS "deps" or "deps-dirty" GOTO :HELP ) REM Give the user a chance to cancel if we found something odd. IF "%PS_ASK_TO_CONTINUE%" EQU "" GOTO :BUILD_ENV @ECHO. @ECHO Unexpected parameters detected. Build paused for %PS_CHOICE_TIMEOUT% seconds. choice /T %PS_CHOICE_TIMEOUT% /C YN /D N /M "Continue" IF %ERRORLEVEL% NEQ 1 GOTO :HELP REM Set up MSVC environment :BUILD_ENV SET EXIT_STATUS=2 SET PS_CURRENT_STEP=environment @ECHO ********************************************************************** @ECHO ** Build Config: %PS_CONFIG% @ECHO ** Target Arch: %PS_ARCH% @ECHO ** Build Steps: %PS_STEPS% @ECHO ** Run App: %PS_RUN% @ECHO ** Deps path: %PS_DESTDIR% @ECHO ** Using Microsoft Visual Studio installation found at: SET VSWHERE=%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe IF NOT EXIST "%VSWHERE%" SET VSWHERE=%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe FOR /F "tokens=* USEBACKQ" %%I IN (`"%VSWHERE%" -nologo -property installationPath`) DO SET MSVC_DIR=%%I @ECHO ** %MSVC_DIR% CALL "%MSVC_DIR%\Common7\Tools\vsdevcmd.bat" -arch=%PS_ARCH% -host_arch=%PS_ARCH_HOST% -app_platform=Desktop IF %ERRORLEVEL% NEQ 0 GOTO :END REM Need to reset the echo state after vsdevcmd.bat clobbers it. @IF "%PS_ECHO_ON%" NEQ "" (echo on) ELSE (echo off) IF "%PS_DRY_RUN_ONLY%" NEQ "" ( @ECHO Script terminated early because PS_DRY_RUN_ONLY is set. 1>&2 GOTO :END ) IF /I "%PS_STEPS:~0,3%" EQU "app" GOTO :BUILD_APP REM Build deps :BUILD_DEPS SET EXIT_STATUS=3 SET PS_CURRENT_STEP=deps IF "%PS_STEPS_DIRTY%" EQU "" CALL :MAKE_OR_CLEAN_DIRECTORY deps\build "%PS_DEPS_PATH_FILE_NAME%" cd deps\build || GOTO :END cmake.exe .. -DDESTDIR="%PS_DESTDIR%" || GOTO :END (echo %PS_DESTDIR%)> "%PS_DEPS_PATH_FILE%" msbuild /m ALL_BUILD.vcxproj /p:Configuration=%PS_CONFIG% || GOTO :END cd ..\.. IF /I "%PS_STEPS:~0,4%" EQU "deps" GOTO :RUN_APP REM Build app :BUILD_APP SET EXIT_STATUS=4 SET PS_CURRENT_STEP=app IF "%PS_STEPS_DIRTY%" EQU "" CALL :MAKE_OR_CLEAN_DIRECTORY build "%PS_CUSTOM_RUN_FILE%" cd build || GOTO :END REM Make sure we have a custom batch file skeleton for the run stage set PS_CUSTOM_BAT=%PS_CUSTOM_RUN_FILE% CALL :CANONICALIZE_PATH PS_CUSTOM_BAT IF NOT EXIST %PS_CUSTOM_BAT% CALL :WRITE_CUSTOM_SCRIPT_SKELETON %PS_CUSTOM_BAT% SET PS_PROJECT_IS_OPEN= FOR /F "tokens=2 delims=," %%I in ( 'tasklist /V /FI "IMAGENAME eq devenv.exe " /NH /FO CSV ^| find "%PS_SOLUTION_NAME%"' ) do SET PS_PROJECT_IS_OPEN=%%~I cmake.exe .. -DCMAKE_PREFIX_PATH="%PS_DESTDIR%\usr\local" -DCMAKE_CONFIGURATION_TYPES=%PS_CONFIG_LIST% || GOTO :END REM Skip the build step if we're using the undocumented app-cmake to regenerate the full config from inside devenv IF "%PS_STEPS%" NEQ "app-cmake" msbuild /m ALL_BUILD.vcxproj /p:Configuration=%PS_CONFIG% || GOTO :END (echo %PS_DESTDIR%)> "%PS_DEPS_PATH_FILE_FOR_CONFIG%" REM Run app :RUN_APP REM All build steps complete. CALL :DIFF_TIME ELAPSED_TIME %START_TIME% %TIME% IF "%PS_CURRENT_STEP%" NEQ "arguments" ( @ECHO. @ECHO Total Build Time Elapsed %ELAPSED_TIME% ) SET EXIT_STATUS=5 SET PS_CURRENT_STEP=run cd src\%PS_CONFIG% || GOTO :END IF "%PS_RUN%" EQU "none" GOTO :PROLOGUE SET PS_PROJECT_IS_OPEN= FOR /F "tokens=2 delims=," %%I in ( 'tasklist /V /FI "IMAGENAME eq devenv.exe " /NH /FO CSV ^| find "%PS_SOLUTION_NAME%"' ) do SET PS_PROJECT_IS_OPEN=%%~I @ECHO. @ECHO Running %PS_RUN% application... @REM icacls below is just a hack for file-not-found error handling IF "%PS_RUN%" EQU "console" ( icacls prusa-slicer-console.exe >nul || GOTO :END start /wait /b prusa-slicer-console.exe ) ELSE IF "%PS_RUN%" EQU "window" ( icacls prusa-slicer.exe >nul || GOTO :END start prusa-slicer.exe ) ELSE IF "%PS_RUN%" EQU "viewer" ( icacls prusa-gcodeviewer.exe >nul || GOTO :END start prusa-gcodeviewer.exe ) ELSE IF "%PS_RUN%" EQU "custom" ( icacls %PS_CUSTOM_BAT% >nul || GOTO :END CALL %PS_CUSTOM_BAT% ) ELSE IF "%PS_RUN%" EQU "ide" ( IF "%PS_PROJECT_IS_OPEN%" NEQ "" ( @ECHO WARNING: Solution is already open in Visual Studio. Skipping ide run step. 1>&2 ) ELSE ( @ECHO Preparing to run Visual Studio... cd ..\.. || GOTO :END REM This hack generates a single config for MSVS, guaranteeing it gets set as the active config. cmake.exe .. -DCMAKE_PREFIX_PATH="%PS_DESTDIR%\usr\local" -DCMAKE_CONFIGURATION_TYPES=%PS_CONFIG% > nul 2> nul || GOTO :END REM Now launch devenv with the single config (setting it active) and a /command switch to re-run cmake and generate the full config list start devenv.exe %PS_SOLUTION_NAME%.sln /command ^"shell /o ^^^"%~f0^^^" -d ^^^"%PS_DESTDIR%^^^" -c %PS_CONFIG% -a %PS_ARCH% -r none -s app-cmake^" REM If devenv fails to launch just directly regenerate the full config list. IF %ERRORLEVEL% NEQ 0 ( cmake.exe .. -DCMAKE_PREFIX_PATH="%PS_DESTDIR%\usr\local" -DCMAKE_CONFIGURATION_TYPES=%PS_CONFIG_LIST% 2> nul 1> nul || GOTO :END ) ) ) @REM ********** DON'T ADD ANY CODE BETWEEN THESE TWO SECTIONS ********** @REM RUN_APP may hand off control, so let exit codes fall through to PROLOGUE. :PROLOGUE SET EXIT_STATUS=%ERRORLEVEL% :END @IF "%PS_ECHO_ON%%PS_DRY_RUN_ONLY%" NEQ "" ( @ECHO ********************************************************************** @ECHO ** Script Parameters: @ECHO ********************************************************************** @SET PS_ ) IF "%EXIT_STATUS%" NEQ "0" ( IF "%PS_CURRENT_STEP%" NEQ "arguments" ( @ECHO. @ECHO ERROR: *** Build process failed at %PS_CURRENT_STEP% step. *** 1>&2 ) ) ELSE ( @ECHO All steps completed successfully. ) popd exit /B %EXIT_STATUS% GOTO :EOF REM Functions and stubs start here. :RESOLVE_DESTDIR_CACHE @REM Resolves all DESTDIR cache values and sets PS_STEPS_DEFAULT @REM Note: This just sets global variableq, so it doesn't use setlocal. SET PS_DEPS_PATH_FILE_FOR_CONFIG=%~dp0build\%PS_ARCH%\%PS_CONFIG%\%PS_DEPS_PATH_FILE_NAME% CALL :CANONICALIZE_PATH PS_DEPS_PATH_FILE_FOR_CONFIG IF EXIST "%PS_DEPS_PATH_FILE_FOR_CONFIG%" ( FOR /F "tokens=* USEBACKQ" %%I IN ("%PS_DEPS_PATH_FILE_FOR_CONFIG%") DO ( SET PS_DESTDIR_CACHED=%%I SET PS_DESTDIR_DEFAULT_MSG=%%I ) SET PS_STEPS_DEFAULT=app-dirty ) ELSE IF EXIST "%PS_DEPS_PATH_FILE%" ( FOR /F "tokens=* USEBACKQ" %%I IN ("%PS_DEPS_PATH_FILE%") DO ( SET PS_DESTDIR_CACHED=%%I SET PS_DESTDIR_DEFAULT_MSG=%%I ) SET PS_STEPS_DEFAULT=app ) ELSE ( SET PS_DESTDIR_CACHED= SET PS_DESTDIR_DEFAULT_MSG=Cache missing. Argument required. SET PS_STEPS_DEFAULT=all ) GOTO :EOF :PARSE_OPTION @REM Argument parser called for each argument @REM %1 - Valid option list @REM %2 - Variable name for parser state; must be unset when parsing finished @REM %3 - Current argument value @REM PARSER_FAIL will be set on an error @REM Note: Must avoid delayed expansion since filenames may contain ! character setlocal disableDelayedExpansion IF "%PARSER_FAIL%" NEQ "" GOTO :EOF CALL SET LAST_ARG=%%%2%% IF "%LAST_ARG%" EQU "" ( CALL :PARSE_OPTION_NAME %1 %~2 %~3 1 SET ARG_TYPE=NAME ) ELSE ( SET PS_SET_COMMAND=SET PS_%LAST_ARG%=%~3 SET ARG_TYPE=LAST_ARG SET %~2= ) CALL SET LAST_ARG=%%%2%% IF "%LAST_ARG%%ARG_TYPE%" EQU "NAME" SET PARSER_FAIL=%~3 ( endlocal SET PARSER_FAIL=%PARSER_FAIL% SET %~2=%LAST_ARG% %PS_SET_COMMAND% ) GOTO :EOF :PARSE_OPTION_VALUE setlocal disableDelayedExpansion @REM Parses value and verifies it is within the supplied list @REM %1 - Valid option list @REM %2 - In/out variable name; unset on error CALL SET NAME=%~2 CALL SET SAVED_VALUE=%%%NAME%%% CALL :PARSE_OPTION_NAME %1 %NAME% -%SAVED_VALUE% CALL SET NEW_VALUE=%%%NAME%%% IF "%NEW_VALUE%" EQU "" ( @ECHO ERROR: Invalid parameter: %NAME:~3%=%SAVED_VALUE% 1>&2 ) endlocal & SET %NAME%=%NEW_VALUE% GOTO :EOF :PARSE_OPTION_NAME @REM Parses an option name @REM %1 - Valid option list @REM %2 - Out variable name; unset on error @REM %3 - Current argument value @REM %4 - Boolean indicating single character switches are valid @REM Note: Delayed expansion safe because ! character is invalid in option name setlocal enableDelayedExpansion IF "%4" NEQ "" FOR %%I IN (%~1) DO @( SET SHORT_NAME=%%~I SET SHORT_ARG_!SHORT_NAME:~0,1!=%%~I ) @SET OPTION_NAME=%~3 @(echo %OPTION_NAME%)| findstr /R /C:"[-/]..*">nul || GOTO :PARSE_OPTION_NAME_FAIL @SET OPTION_NAME=%OPTION_NAME:~1% IF "%4" NEQ "" ( IF "%OPTION_NAME%" EQU "%OPTION_NAME:~0,1%" ( IF "!SHORT_ARG_%OPTION_NAME:~0,1%!" NEQ "" SET OPTION_NAME=!SHORT_ARG_%OPTION_NAME:~0,1%! ) ) @(echo %OPTION_NAME%)| findstr /R /C:".[ ][ ]*.">nul && GOTO :PARSE_OPTION_NAME_FAIL @(echo %~1 )| findstr /I /C:" %OPTION_NAME% ">nul || GOTO :PARSE_OPTION_NAME_FAIL FOR %%I IN (%~1) DO SET OPTION_NAME=!OPTION_NAME:%%~I=%%~I! endlocal & SET %~2=%OPTION_NAME% GOTO :EOF :PARSE_OPTION_NAME_FAIL endlocal & SET %~2= GOTO :EOF :MAKE_OR_CLEAN_DIRECTORY @REM Create directory if it doesn't exist or clean it if it does @REM %1 - Directory path to clean or create @REM %* - Optional list of files/dirs to keep (in the base directory only) setlocal disableDelayedExpansion IF NOT EXIST "%~1" ( @ECHO Creating %~1 mkdir "%~1" && ( endlocal GOTO :EOF ) ) @ECHO Cleaning %~1 ... SET KEEP_LIST= :MAKE_OR_CLEAN_DIRECTORY_ARG_LOOP IF "%~2" NEQ "" ( SET KEEP_LIST=%KEEP_LIST% "%~2" SHIFT /2 GOTO :MAKE_OR_CLEAN_DIRECTORY_ARG_LOOP ) for /F "usebackq delims=" %%I in (`dir /a /b "%~1"`) do ( (echo %KEEP_LIST%)| findstr /I /L /C:"\"%%I\"">nul || ( rmdir /s /q "%~1\%%I" 2>nul ) || del /q /f "%~1\%%I" ) endlocal GOTO :EOF :TOLOWER @REM Converts supplied environment variable to lowercase @REM %1 - Input/output variable name @REM Note: This is slow on very long strings, but is used only on very short ones setlocal disableDelayedExpansion @FOR %%b IN (a b c d e f g h i j k l m n o p q r s t u v w x y z) DO @CALL set %~1=%%%1:%%b=%%b%% @CALL SET OUTPUT=%%%~1%% endlocal & SET %~1=%OUTPUT% GOTO :EOF :CANONICALIZE_PATH @REM Canonicalizes the path in the supplied variable @REM %1 - Input/output variable containing path to canonicalize @REM %2 - Optional base directory setlocal CALL :CANONICALIZE_PATH_INNER %1 %%%~1%% %2 endlocal & SET %~1=%OUTPUT% GOTO :EOF :CANONICALIZE_PATH_INNER if "%~3" NEQ "" (pushd %3 || GOTO :EOF) SET OUTPUT=%~f2 if "%~3" NEQ "" popd GOTO :EOF :DIFF_TIME @REM Calculates elapsed time between two timestamps (TIME environment variable format) @REM %1 - Output variable @REM %2 - Start time @REM %3 - End time setlocal EnableDelayedExpansion set START_ARG=%2 set END_ARG=%3 set END=!END_ARG:%TIME:~8,1%=%%100)*100+1! set START=!START_ARG:%TIME:~8,1%=%%100)*100+1! set /A DIFF=((((10!END:%TIME:~2,1%=%%100)*60+1!%%100)-((((10!START:%TIME:~2,1%=%%100)*60+1!%%100), DIFF-=(DIFF^>^>31)*24*60*60*100 set /A CC=DIFF%%100+100,DIFF/=100,SS=DIFF%%60+100,DIFF/=60,MM=DIFF%%60+100,HH=DIFF/60+100 @endlocal & set %1=%HH:~1%%TIME:~2,1%%MM:~1%%TIME:~2,1%%SS:~1%%TIME:~8,1%%CC:~1% @GOTO :EOF :WRITE_CUSTOM_SCRIPT_SKELETON @REM Writes the following text to the supplied file @REM %1 - Output filename setlocal @( ECHO @ECHO. ECHO @ECHO ******************************************************************************** ECHO @ECHO ** This is a custom run script skeleton. ECHO @ECHO ******************************************************************************** ECHO @ECHO. ECHO @ECHO ******************************************************************************** ECHO @ECHO ** The working directory is: ECHO @ECHO ******************************************************************************** ECHO dir ECHO @ECHO. ECHO @ECHO ******************************************************************************** ECHO @ECHO ** The environment is: ECHO @ECHO ******************************************************************************** ECHO set ECHO @ECHO. ECHO @ECHO ******************************************************************************** ECHO @ECHO ** Edit or replace this script to run custom steps after a successful build: ECHO @ECHO ** %~1 ECHO @ECHO ******************************************************************************** ECHO @ECHO. ) > "%~1" endlocal GOTO :EOF