# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-02-06 20:24+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: src/slic3r/GUI/AboutDialog.cpp:39 src/slic3r/GUI/AboutDialog.cpp:291
msgid "Portions copyright"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:127 src/slic3r/GUI/AboutDialog.cpp:256
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:129
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:199
#, possible-c-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:231 src/slic3r/GUI/MainFrame.cpp:64
msgid "Version"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:258
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:259
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:260
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:261
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/AppConfig.cpp:118
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:118
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:120
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:470
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:122
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:126
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:176
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:214
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:472
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:497
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:66 src/slic3r/GUI/GUI_ObjectList.cpp:2038
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:73
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:77
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:162
#: src/slic3r/GUI/Tab.cpp:2306
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:78
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:84
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:85
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:89
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:92 src/slic3r/GUI/ConfigWizard.cpp:218
#: src/slic3r/GUI/ConfigWizard.cpp:971 src/slic3r/GUI/ConfigWizard.cpp:985
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:135
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:333
#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75
#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:91
#: src/libslic3r/PrintConfig.cpp:178 src/libslic3r/PrintConfig.cpp:236
#: src/libslic3r/PrintConfig.cpp:311 src/libslic3r/PrintConfig.cpp:319
#: src/libslic3r/PrintConfig.cpp:369 src/libslic3r/PrintConfig.cpp:379
#: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:516
#: src/libslic3r/PrintConfig.cpp:534 src/libslic3r/PrintConfig.cpp:713
#: src/libslic3r/PrintConfig.cpp:1240 src/libslic3r/PrintConfig.cpp:1301
#: src/libslic3r/PrintConfig.cpp:1319 src/libslic3r/PrintConfig.cpp:1337
#: src/libslic3r/PrintConfig.cpp:1393 src/libslic3r/PrintConfig.cpp:1403
#: src/libslic3r/PrintConfig.cpp:1525 src/libslic3r/PrintConfig.cpp:1533
#: src/libslic3r/PrintConfig.cpp:1574 src/libslic3r/PrintConfig.cpp:1582
#: src/libslic3r/PrintConfig.cpp:1592 src/libslic3r/PrintConfig.cpp:1600
#: src/libslic3r/PrintConfig.cpp:1608 src/libslic3r/PrintConfig.cpp:1691
#: src/libslic3r/PrintConfig.cpp:1924 src/libslic3r/PrintConfig.cpp:1995
#: src/libslic3r/PrintConfig.cpp:2029 src/libslic3r/PrintConfig.cpp:2157
#: src/libslic3r/PrintConfig.cpp:2236 src/libslic3r/PrintConfig.cpp:2243
#: src/libslic3r/PrintConfig.cpp:2250 src/libslic3r/PrintConfig.cpp:2280
#: src/libslic3r/PrintConfig.cpp:2290 src/libslic3r/PrintConfig.cpp:2300
#: src/libslic3r/PrintConfig.cpp:2485 src/libslic3r/PrintConfig.cpp:2624
#: src/libslic3r/PrintConfig.cpp:2633 src/libslic3r/PrintConfig.cpp:2642
#: src/libslic3r/PrintConfig.cpp:2652 src/libslic3r/PrintConfig.cpp:2696
#: src/libslic3r/PrintConfig.cpp:2706 src/libslic3r/PrintConfig.cpp:2718
#: src/libslic3r/PrintConfig.cpp:2738 src/libslic3r/PrintConfig.cpp:2748
#: src/libslic3r/PrintConfig.cpp:2758 src/libslic3r/PrintConfig.cpp:2776
#: src/libslic3r/PrintConfig.cpp:2791 src/libslic3r/PrintConfig.cpp:2805
#: src/libslic3r/PrintConfig.cpp:2816 src/libslic3r/PrintConfig.cpp:2829
#: src/libslic3r/PrintConfig.cpp:2874 src/libslic3r/PrintConfig.cpp:2884
#: src/libslic3r/PrintConfig.cpp:2893 src/libslic3r/PrintConfig.cpp:2903
#: src/libslic3r/PrintConfig.cpp:2919
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:93 src/libslic3r/PrintConfig.cpp:710
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:94
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:98 src/slic3r/GUI/GUI_Preview.cpp:251
#: src/libslic3r/ExtrusionEntity.cpp:322
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:102
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:155
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:172
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:182 src/slic3r/GUI/BedShapeDialog.cpp:261
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:190 src/slic3r/GUI/BedShapeDialog.cpp:269
#: src/slic3r/GUI/Tab.cpp:3094
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:223 src/slic3r/GUI/BedShapeDialog.cpp:302
msgid "Not found: "
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:251
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:487
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:494 src/slic3r/GUI/BedShapeDialog.cpp:543
#: src/slic3r/GUI/BedShapeDialog.cpp:566
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:505
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:513
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:517
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:532
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:555
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:930
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:53
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:48
msgid ""
"Zero layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:49
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 src/slic3r/GUI/Tab.cpp:1039
#: src/libslic3r/PrintConfig.cpp:71
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:60
msgid ""
"Zero first layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:890
msgid "First layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:75
#, no-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- inactive Ensure vertical shell thickness"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:82
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:83
msgid "Spiral Vase"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:107
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:111
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:112
#: src/slic3r/GUI/ConfigManipulation.cpp:132
msgid "Wipe Tower"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:128
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:131
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:151
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:154
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:155
msgid "Support Generator"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:200
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:202
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:203
#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:94
#: src/slic3r/GUI/GUI_ObjectList.cpp:612 src/slic3r/GUI/Plater.cpp:524
#: src/slic3r/GUI/Tab.cpp:1081 src/slic3r/GUI/Tab.cpp:1082
#: src/libslic3r/PrintConfig.cpp:193 src/libslic3r/PrintConfig.cpp:416
#: src/libslic3r/PrintConfig.cpp:436 src/libslic3r/PrintConfig.cpp:777
#: src/libslic3r/PrintConfig.cpp:791 src/libslic3r/PrintConfig.cpp:828
#: src/libslic3r/PrintConfig.cpp:982 src/libslic3r/PrintConfig.cpp:992
#: src/libslic3r/PrintConfig.cpp:1010 src/libslic3r/PrintConfig.cpp:1029
#: src/libslic3r/PrintConfig.cpp:1048 src/libslic3r/PrintConfig.cpp:1738
#: src/libslic3r/PrintConfig.cpp:1755
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:309
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:311
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:322
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:324
msgid "Invalid pinhead diameter"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
msgid "Active"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1452
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/slic3r/GUI/Preset.cpp:1456
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:961
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:63
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
#, possible-c-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:104
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:218
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:222
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:289
msgid "Standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:290 src/slic3r/GUI/ConfigWizard.cpp:573
#: src/slic3r/GUI/Tab.cpp:3144
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:291 src/slic3r/GUI/ConfigWizard.cpp:574
#: src/slic3r/GUI/Plater.cpp:496 src/slic3r/GUI/Plater.cpp:636
#: src/libslic3r/ExtrusionEntity.cpp:309
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:427
#, possible-c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:429
#, possible-c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:431
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:433
#, possible-c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:438
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:481
#, possible-c-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:565
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:566
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:603 src/slic3r/GUI/ConfigWizard.cpp:631
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:732
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:732
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:734
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:736
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:760
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:760
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:768 src/slic3r/GUI/Preferences.cpp:64
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:772
#, possible-c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:778 src/slic3r/GUI/Preferences.cpp:82
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:782
#, possible-c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:785
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:790
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:798 src/slic3r/GUI/GUI_ObjectList.cpp:1655
#: src/slic3r/GUI/GUI_ObjectList.cpp:1658
#: src/slic3r/GUI/GUI_ObjectList.cpp:3932
#: src/slic3r/GUI/GUI_ObjectList.cpp:3935 src/slic3r/GUI/Plater.cpp:3211
#: src/slic3r/GUI/Plater.cpp:3946 src/slic3r/GUI/Plater.cpp:3949
#: src/slic3r/GUI/Plater.cpp:3980 src/slic3r/GUI/Plater.cpp:3983
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:801
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:805
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:814
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:816
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:821
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:822
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:823
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:857
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:861
#, possible-c-format
msgid "Pick another vendor supported by %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:892
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:892 src/slic3r/GUI/Tab.cpp:1931
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:896
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:930
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:933
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:953
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:953
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:967
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:970
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:980
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:981
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:984
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1018
msgid "Extruder and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1018
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1034
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1035
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1038
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1039 src/slic3r/GUI/ConfigWizard.cpp:1053
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1048
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1049
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1052
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1474 src/slic3r/GUI/ConfigWizard.cpp:2014
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1474 src/slic3r/GUI/ConfigWizard.cpp:2016
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1528
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1533
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1751 src/slic3r/GUI/DoubleSlider.cpp:1877
#: src/slic3r/GUI/DoubleSlider.cpp:1898 src/slic3r/GUI/GUI.cpp:240
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1760
msgid "You have to select at least one filament for selected printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1761
msgid "Do you want to automatic select default filaments?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1771
msgid "You have to select at least one material for selected printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1772
msgid "Do you want to automatic select default materials?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1979
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1982
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1983
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1984
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1985 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1998
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2001
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2014
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2014 src/slic3r/GUI/GUI_ObjectList.cpp:3528
msgid "Type:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2016
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2016
msgid "Layer height:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2112
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2113
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2115
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2116
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:79
msgid "Place bearings in slots and resume"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:923
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:925
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:928
msgid "For jump to print Z use left mouse button click OR (Shift+G)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:929
msgid "For set extruder sequence for whole print use right mouse button click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:930 src/slic3r/GUI/DoubleSlider.cpp:1495
msgid "Jump to print Z"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:933
msgid "For edit current color use right mouse button click on colored band"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:941
msgid "Slider(print) mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:955
msgid "For add change extruder use left mouse button click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:957
msgid ""
"For add color change use left mouse button click if you want to use colors "
"from default color list, or Shift + left mouse button click if you want to "
"select a color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:960
msgid "For add color change use left mouse button click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:961
msgid "OR pres \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:963
msgid "For add another code use Ctrl + left mouse button click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:964
msgid "For add another code use right mouse button click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:973
msgid "Color change (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:974
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:977
msgid "Pause print (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:979
msgid "Extruder(tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:980
msgid "\"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:986
msgid "Note"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:988
msgid ""
"G-code of this tick has a conflict with slider(print) mode.\n"
"Any its editing will cause a changes of DoubleSlider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:991
msgid ""
"There is a color change for extruder that wouldn't be used till the end of "
"printing.\n"
"This code wouldn't be processed during GCode generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:994
msgid ""
"There is a extruder change to the same extruder.\n"
"This code wouldn't be processed during GCode generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:997
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your choice to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1002
msgid "For Delete tick use left mouse button click OR pres \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1004
msgid "For Edit tick use Ctrl + Left mouse button click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1005
msgid "For Edit tick use right mouse button click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1099 src/slic3r/GUI/DoubleSlider.cpp:1135
#: src/slic3r/GUI/GLCanvas3D.cpp:982 src/slic3r/GUI/Tab.cpp:2302
#: src/libslic3r/GCode/PreviewData.cpp:445
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1100
msgid "active"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1109
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1109 src/slic3r/GUI/GUI_ObjectList.cpp:1666
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1110
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1112
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1136
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1144
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1145
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1443
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1453
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1456
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1474
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1475
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1476
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1482
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1483
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1484
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1485
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1498
msgid "Set extruder sequence for whole print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1584
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1585
msgid "Custom Gcode on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1600
msgid "Enter short message shown on Printer display during pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1601
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1616
msgid "Enter print z value to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1617
msgid "Jump to print z"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1871
msgid ""
"The last color change data was saved for a single extruder printer profile."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1872
msgid ""
"The last color change data was saved for a multiple extruder printer profile."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1874
msgid "Your current changes will cause a deletion of all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1875 src/slic3r/GUI/DoubleSlider.cpp:1896
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1888
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1889
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"\tNO if you want all tool changes switch to color changes, \n"
"\tor CANCEL for do nothing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1892
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1894
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1895
msgid "Your current changes will cause a deletion of all saved tool changes."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
#: src/libslic3r/PrintConfig.cpp:352 src/libslic3r/PrintConfig.cpp:995
#: src/libslic3r/PrintConfig.cpp:1514 src/libslic3r/PrintConfig.cpp:1699
#: src/libslic3r/PrintConfig.cpp:1760 src/libslic3r/PrintConfig.cpp:1940
#: src/libslic3r/PrintConfig.cpp:1986
msgid "layers"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:131
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:134
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:145 src/slic3r/GUI/OptionsGroup.cpp:570
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:170
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:190 src/slic3r/GUI/Field.cpp:221
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:376
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/Field.cpp:199
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:235
#, possible-c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:238
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, possible-c-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, possible-c-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1649
#: src/slic3r/GUI/Tab.cpp:1705
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:852
#: src/slic3r/GUI/Mouse3DController.cpp:387
#: src/slic3r/GUI/PrintHostDialogs.cpp:161
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:902
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:906
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:239 src/slic3r/GUI/GLCanvas3D.cpp:4622
msgid "Variable layer height"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:242
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:245
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:248
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:251
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:254
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:257
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:260
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:263
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:266
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:269
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:272
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:278
msgid "Quality / Speed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:282
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:293
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:299 src/libslic3r/PrintConfig.cpp:511
msgid "Radius"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:309
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:318
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:604
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:690
msgid "An object outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:691
msgid "A toolpath outside the print area was detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:692
msgid "SLA supports outside the print area were detected"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:693
msgid "Some objects are not visible"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:695
msgid ""
"An object outside the print area was detected\n"
"Resolve the current problem to continue slicing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:909 src/slic3r/GUI/GLCanvas3D.cpp:938
msgid "Default print color"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:939 src/slic3r/GUI/GLCanvas3D.cpp:948
#: src/slic3r/GUI/GLCanvas3D.cpp:987
msgid "Pause print or custom G-code"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:960
#, possible-c-format
msgid "up to %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:964
#, possible-c-format
msgid "above %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:968
#, possible-c-format
msgid "%.2f - %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:995
#, possible-c-format
msgid "Color change for Extruder %d at %.2f mm"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1306
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1705
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1713
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1721
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2075
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2945
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:571
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3025
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:573
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3538
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4085
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4085
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4103
#, possible-c-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4103
#, possible-c-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4516
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4524 src/slic3r/GUI/GUI_ObjectList.cpp:1697
#: src/slic3r/GUI/Plater.cpp:3942 src/slic3r/GUI/Plater.cpp:3969
#: src/slic3r/GUI/Tab.cpp:3094
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4533 src/slic3r/GUI/Plater.cpp:4693
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4542 src/slic3r/GUI/KBShortcutsDialog.cpp:137
#: src/slic3r/GUI/Plater.cpp:2740
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4542 src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4554
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4563
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4575 src/slic3r/GUI/Plater.cpp:3799
#: src/slic3r/GUI/Plater.cpp:3811 src/slic3r/GUI/Plater.cpp:3956
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4586 src/slic3r/GUI/Plater.cpp:3958
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4599
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4609 src/slic3r/GUI/GUI_ObjectList.cpp:1485
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4673 src/slic3r/GUI/MainFrame.cpp:581
msgid "Undo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4673 src/slic3r/GUI/GLCanvas3D.cpp:4706
msgid "Click right mouse button to open History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4690
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4706 src/slic3r/GUI/MainFrame.cpp:584
msgid "Redo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4722
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6659
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6678
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:284
#, possible-c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:287
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:290
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
msgstr ""

#: src/slic3r/GUI/GLCanvas3DManager.cpp:292
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:144 src/libslic3r/PrintConfig.cpp:3397
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:168
msgid "Keep upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:169
msgid "Keep lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
msgid "Rotate lower part upwards"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:175
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:45
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:59
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:52
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:413
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:530
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:786
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:858
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:948
msgid "Hollowing and drilling"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:1027
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:48
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:480
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:499
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517
#: src/libslic3r/PrintConfig.cpp:3446
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:47
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:518
#: src/libslic3r/PrintConfig.cpp:3461
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1350
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1353
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1354
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
#: src/libslic3r/PrintConfig.cpp:2765
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1356
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:479
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:615
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:804
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:872
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:978
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:999
msgid "SLA gizmo turned on"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025
msgid "Save changes?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1037
msgid "SLA gizmo turned off"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1076
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1175
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1247
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1248
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1249 src/slic3r/GUI/GUI.cpp:246
#: src/slic3r/GUI/Tab.cpp:3054 src/slic3r/GUI/WipeTowerDialog.cpp:45
#: src/slic3r/GUI/WipeTowerDialog.cpp:366
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1252
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1313
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1324
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1342
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1345
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1346
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1342
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1343
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1343
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1344
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1347
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1348
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1344
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1345
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1346
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1347
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1348
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1349
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1351
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1351
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1352
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1355
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:498
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:572
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:138
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:141
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:442
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:450 src/slic3r/GUI/GUI_App.cpp:459
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:466
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:474
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:555
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:567
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:629
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:629
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:797
#, possible-c-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:800
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:800
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:801
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:801
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:802
msgid "Check for updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:802
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:804
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:810
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:813 src/slic3r/GUI/wxExtensions.cpp:730
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:813
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:814 src/slic3r/GUI/GUI_ObjectList.cpp:102
#: src/slic3r/GUI/GUI_ObjectList.cpp:620 src/slic3r/GUI/Tab.cpp:1077
#: src/slic3r/GUI/Tab.cpp:1092 src/slic3r/GUI/Tab.cpp:1191
#: src/slic3r/GUI/Tab.cpp:1194 src/slic3r/GUI/Tab.cpp:1464
#: src/slic3r/GUI/Tab.cpp:1951 src/slic3r/GUI/Tab.cpp:3633
#: src/slic3r/GUI/wxExtensions.cpp:731 src/libslic3r/PrintConfig.cpp:88
#: src/libslic3r/PrintConfig.cpp:213 src/libslic3r/PrintConfig.cpp:376
#: src/libslic3r/PrintConfig.cpp:1038 src/libslic3r/PrintConfig.cpp:2286
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:814
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:815 src/slic3r/GUI/wxExtensions.cpp:732
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:815
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:820
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:820
#, possible-c-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:822
msgid "Change Application &Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:824
msgid "Flash printer &firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:824
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Taking configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:839
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:882
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:884
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:885
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:908
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:932
msgid "The presets on the following tabs were modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:932 src/slic3r/GUI/Tab.cpp:2916
msgid "Discard changes and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:935
msgid "Unsaved Presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1084 src/slic3r/GUI/Tab.cpp:2928
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1085
msgid "Please check and fix your object list."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1086 src/slic3r/GUI/Plater.cpp:2299
#: src/slic3r/GUI/Tab.cpp:2930
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1103
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:153
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:162
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:93
#: src/slic3r/GUI/GUI_ObjectList.cpp:611 src/libslic3r/PrintConfig.cpp:72
#: src/libslic3r/PrintConfig.cpp:165 src/libslic3r/PrintConfig.cpp:174
#: src/libslic3r/PrintConfig.cpp:408 src/libslic3r/PrintConfig.cpp:470
#: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:891
#: src/libslic3r/PrintConfig.cpp:1076 src/libslic3r/PrintConfig.cpp:1383
#: src/libslic3r/PrintConfig.cpp:1450 src/libslic3r/PrintConfig.cpp:1631
#: src/libslic3r/PrintConfig.cpp:2084 src/libslic3r/PrintConfig.cpp:2143
#: src/libslic3r/PrintConfig.cpp:2152
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95
#: src/slic3r/GUI/GUI_ObjectList.cpp:613 src/slic3r/GUI/GUI_Preview.cpp:248
#: src/slic3r/GUI/Tab.cpp:1110 src/slic3r/GUI/Tab.cpp:1111
#: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/PrintConfig.cpp:360
#: src/libslic3r/PrintConfig.cpp:1511 src/libslic3r/PrintConfig.cpp:1876
#: src/libslic3r/PrintConfig.cpp:1882 src/libslic3r/PrintConfig.cpp:1890
#: src/libslic3r/PrintConfig.cpp:1902 src/libslic3r/PrintConfig.cpp:1912
#: src/libslic3r/PrintConfig.cpp:1920 src/libslic3r/PrintConfig.cpp:1935
#: src/libslic3r/PrintConfig.cpp:1956 src/libslic3r/PrintConfig.cpp:1968
#: src/libslic3r/PrintConfig.cpp:1984 src/libslic3r/PrintConfig.cpp:1993
#: src/libslic3r/PrintConfig.cpp:2002 src/libslic3r/PrintConfig.cpp:2013
#: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/PrintConfig.cpp:2035
#: src/libslic3r/PrintConfig.cpp:2036 src/libslic3r/PrintConfig.cpp:2045
#: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/PrintConfig.cpp:2067
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99
#: src/slic3r/GUI/GUI_ObjectList.cpp:617 src/libslic3r/PrintConfig.cpp:2262
#: src/libslic3r/PrintConfig.cpp:2270
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:614
#: src/slic3r/GUI/GUI_Preview.cpp:226 src/slic3r/GUI/Tab.cpp:1135
#: src/libslic3r/PrintConfig.cpp:225 src/libslic3r/PrintConfig.cpp:458
#: src/libslic3r/PrintConfig.cpp:920 src/libslic3r/PrintConfig.cpp:1049
#: src/libslic3r/PrintConfig.cpp:1440 src/libslic3r/PrintConfig.cpp:1677
#: src/libslic3r/PrintConfig.cpp:1726 src/libslic3r/PrintConfig.cpp:1778
#: src/libslic3r/PrintConfig.cpp:2128
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:615
#: src/slic3r/GUI/Tab.cpp:1170 src/slic3r/GUI/Tab.cpp:1822
#: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:1003
#: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1747
#: src/libslic3r/PrintConfig.cpp:1948 src/libslic3r/PrintConfig.cpp:1975
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:616
#: src/libslic3r/PrintConfig.cpp:447 src/libslic3r/PrintConfig.cpp:555
#: src/libslic3r/PrintConfig.cpp:878 src/libslic3r/PrintConfig.cpp:1011
#: src/libslic3r/PrintConfig.cpp:1427 src/libslic3r/PrintConfig.cpp:1767
#: src/libslic3r/PrintConfig.cpp:1957 src/libslic3r/PrintConfig.cpp:2116
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:622
#: src/slic3r/GUI/Plater.cpp:492 src/slic3r/GUI/Tab.cpp:3576
#: src/slic3r/GUI/Tab.cpp:3577 src/libslic3r/PrintConfig.cpp:2615
#: src/libslic3r/PrintConfig.cpp:2622 src/libslic3r/PrintConfig.cpp:2631
#: src/libslic3r/PrintConfig.cpp:2640 src/libslic3r/PrintConfig.cpp:2650
#: src/libslic3r/PrintConfig.cpp:2676 src/libslic3r/PrintConfig.cpp:2683
#: src/libslic3r/PrintConfig.cpp:2694 src/libslic3r/PrintConfig.cpp:2704
#: src/libslic3r/PrintConfig.cpp:2713 src/libslic3r/PrintConfig.cpp:2726
#: src/libslic3r/PrintConfig.cpp:2736 src/libslic3r/PrintConfig.cpp:2745
#: src/libslic3r/PrintConfig.cpp:2755 src/libslic3r/PrintConfig.cpp:2766
#: src/libslic3r/PrintConfig.cpp:2774
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:623
#: src/slic3r/GUI/Plater.cpp:632 src/slic3r/GUI/Tab.cpp:3608
#: src/slic3r/GUI/Tab.cpp:3609 src/libslic3r/PrintConfig.cpp:2782
#: src/libslic3r/PrintConfig.cpp:2789 src/libslic3r/PrintConfig.cpp:2803
#: src/libslic3r/PrintConfig.cpp:2814 src/libslic3r/PrintConfig.cpp:2824
#: src/libslic3r/PrintConfig.cpp:2846 src/libslic3r/PrintConfig.cpp:2857
#: src/libslic3r/PrintConfig.cpp:2864 src/libslic3r/PrintConfig.cpp:2871
#: src/libslic3r/PrintConfig.cpp:2882 src/libslic3r/PrintConfig.cpp:2891
#: src/libslic3r/PrintConfig.cpp:2900
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:3626
#: src/slic3r/GUI/Tab.cpp:3627 src/libslic3r/SLA/Hollowing.cpp:46
#: src/libslic3r/SLA/Hollowing.cpp:58 src/libslic3r/SLA/Hollowing.cpp:67
#: src/libslic3r/SLA/Hollowing.cpp:76 src/libslic3r/PrintConfig.cpp:2910
#: src/libslic3r/PrintConfig.cpp:2917 src/libslic3r/PrintConfig.cpp:2927
#: src/libslic3r/PrintConfig.cpp:2936
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:268
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:276 src/slic3r/GUI/Tab.cpp:1428
#: src/slic3r/GUI/wxExtensions.cpp:589 src/libslic3r/PrintConfig.cpp:487
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:280 src/slic3r/GUI/GUI_ObjectList.cpp:392
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:337
#, possible-c-format
msgid "Auto-repaired (%d errors):"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:344
msgid "degenerate facets"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:345
msgid "edges fixed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:346
msgid "facets removed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:347
msgid "facets added"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:348
msgid "facets reversed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:349
msgid "backwards edges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:357
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:394
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:396
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:400
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:402
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:455 src/slic3r/GUI/GUI_ObjectList.cpp:467
#: src/slic3r/GUI/GUI_ObjectList.cpp:915 src/slic3r/GUI/GUI_ObjectList.cpp:3947
#: src/slic3r/GUI/GUI_ObjectList.cpp:3957
#: src/slic3r/GUI/GUI_ObjectList.cpp:3992
#: src/slic3r/GUI/ObjectDataViewModel.cpp:200
#: src/slic3r/GUI/ObjectDataViewModel.cpp:257
#: src/slic3r/GUI/ObjectDataViewModel.cpp:282
#: src/slic3r/GUI/ObjectDataViewModel.cpp:490
#: src/slic3r/GUI/ObjectDataViewModel.cpp:1725
msgid "default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:534
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:549
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:549
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1089
#: src/slic3r/GUI/GUI_ObjectList.cpp:3756
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1104
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1104
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1180
#: src/slic3r/GUI/GUI_ObjectList.cpp:1528
#: src/slic3r/GUI/GUI_ObjectList.cpp:1534
#: src/slic3r/GUI/GUI_ObjectList.cpp:1828
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1263
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1312
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1313
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1314
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1384
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1385
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1386
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1425
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
#: src/slic3r/GUI/GUI_ObjectList.cpp:1462
#: src/slic3r/GUI/GUI_ObjectList.cpp:1466
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1498
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1507
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1582
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1589
#: src/slic3r/GUI/GUI_ObjectList.cpp:1601
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1601
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1611
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1626
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1637
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1647 src/slic3r/GUI/Plater.cpp:3987
msgid "Export as STL"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1655
#: src/slic3r/GUI/GUI_ObjectList.cpp:1658
#: src/slic3r/GUI/GUI_ObjectList.cpp:3932
#: src/slic3r/GUI/GUI_ObjectList.cpp:3935 src/slic3r/GUI/Plater.cpp:3946
#: src/slic3r/GUI/Plater.cpp:3949
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1685 src/libslic3r/PrintConfig.cpp:325
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1691
msgid "Select new extruder for the object/part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1703
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1703
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1772
#: src/slic3r/GUI/GUI_ObjectList.cpp:2030
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1858
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1897
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1972
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2001
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2119
#: src/slic3r/GUI/GUI_ObjectList.cpp:2221
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2131
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2155
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2171
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2202
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2206
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2225
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2249 src/slic3r/GUI/Plater.cpp:2964
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2253
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2305
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2431
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2443
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2456
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2460
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2465
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2471
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2477
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2484
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2484
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2670
msgid "Delete Selected Item"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2807
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2873
#: src/slic3r/GUI/GUI_ObjectList.cpp:2902
#: src/slic3r/GUI/GUI_ObjectList.cpp:2920
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2980
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3266
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3274
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3392
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3393
#: src/slic3r/GUI/GUI_ObjectList.cpp:3526
msgid "Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3393
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3395
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3396
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3397
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3400
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3405
#: src/slic3r/GUI/GUI_ObjectList.cpp:3480 src/slic3r/GUI/Plater.cpp:143
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3521
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3526
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3526
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3526
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3528
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3533
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3778
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3778
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3794
#: src/slic3r/GUI/GUI_ObjectList.cpp:3901 src/slic3r/GUI/Tab.cpp:3426
#: src/slic3r/GUI/Tab.cpp:3430
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3795
#: src/slic3r/GUI/GUI_ObjectList.cpp:3902 src/slic3r/GUI/Tab.cpp:3427
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3927
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3928
msgid "Select extruder number for selected objects and/or parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3951
msgid "Select extruder number:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3952
msgid "This extruder will be set for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3977
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4074 src/slic3r/GUI/Selection.cpp:1474
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4074 src/slic3r/GUI/Selection.cpp:1474
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155 src/libslic3r/GCode.cpp:638
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:215
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:457
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:458
#: src/slic3r/GUI/Mouse3DController.cpp:321
#: src/slic3r/GUI/Mouse3DController.cpp:344
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:263
#, possible-c-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:297
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:397
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:459
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:750
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:781
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:846
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:875
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:878
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:59
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:95
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:101
#, possible-c-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
#, possible-c-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:220
msgid "View"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:223 src/slic3r/GUI/GUI_Preview.cpp:577
#: src/libslic3r/GCode/PreviewData.cpp:345
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:224 src/libslic3r/PrintConfig.cpp:500
msgid "Height"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:225 src/libslic3r/PrintConfig.cpp:2248
msgid "Width"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:227 src/slic3r/GUI/Tab.cpp:1451
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:228
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:229 src/slic3r/GUI/GUI_Preview.cpp:337
#: src/slic3r/GUI/GUI_Preview.cpp:521 src/slic3r/GUI/GUI_Preview.cpp:576
#: src/slic3r/GUI/GUI_Preview.cpp:831 src/libslic3r/GCode/PreviewData.cpp:357
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:230 src/slic3r/GUI/GUI_Preview.cpp:574
#: src/libslic3r/GCode/PreviewData.cpp:359
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:233
msgid "Show"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:237
msgid "Feature types"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:310
msgid "Perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:311
msgid "External perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:312
msgid "Overhang perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:313
msgid "Internal infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:314
#: src/libslic3r/PrintConfig.cpp:1766 src/libslic3r/PrintConfig.cpp:1777
msgid "Solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:315
#: src/libslic3r/PrintConfig.cpp:2115 src/libslic3r/PrintConfig.cpp:2127
msgid "Top solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:245 src/libslic3r/ExtrusionEntity.cpp:316
msgid "Bridge infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:317
#: src/libslic3r/PrintConfig.cpp:919
msgid "Gap fill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:247 src/slic3r/GUI/Tab.cpp:1101
#: src/libslic3r/ExtrusionEntity.cpp:318
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:249 src/libslic3r/ExtrusionEntity.cpp:320
#: src/libslic3r/PrintConfig.cpp:2001
msgid "Support material interface"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:250 src/slic3r/GUI/Tab.cpp:1181
#: src/libslic3r/ExtrusionEntity.cpp:321
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:255 src/libslic3r/PrintConfig.cpp:2162
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:256
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:257
msgid "Unretractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:258
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:259
msgid "Legend"
msgstr ""

#: src/slic3r/GUI/Job.hpp:123
msgid "ERROR: not enough resources to execute a new job."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:14 src/slic3r/GUI/MainFrame.cpp:710
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Load Config from .ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:888
#: src/slic3r/GUI/Plater.cpp:5544 src/libslic3r/PrintConfig.cpp:3348
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Save project (3MF)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Load Config from .ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
#: src/slic3r/GUI/PrintHostDialogs.cpp:136
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
msgid "Press to select multiple object or move multiple object with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
msgid "Main Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Select All objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Delete All"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
#, no-c-format
msgid ""
"Press to activate selection rectangle\n"
"or to snap by 5% in Gizmo scale\n"
"or to snap by 1mm in Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid ""
"Press to scale selection to fit print volume\n"
"in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid ""
"Press to activate deselection rectangle\n"
"or to scale or rotate selected objects\n"
"around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Press to activate one direction scaling in Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Zoom to all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Zoom to selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Unselect gizmo / Clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Plater Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Upper Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
#: src/slic3r/GUI/KBShortcutsDialog.cpp:188
msgid "Lower Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
msgid "Show/Hide (L)egend"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
msgid "Preview Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Move current slider thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Move current slider thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Set upper thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Set lower thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
msgid "Layers Slider Shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:66
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
"releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:174
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:204
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:405
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:405
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:413
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:422
msgid "The selected project is no more available"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:422 src/slic3r/GUI/MainFrame.cpp:787
#: src/slic3r/GUI/PrintHostDialogs.cpp:231
msgid "Error"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:446
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:446
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:450 src/slic3r/GUI/MainFrame.cpp:452
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Import STL/OBJ/AM&F/3MF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:464
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:467
msgid "Import Config from &project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:467
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:471
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:471
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:474
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:477 src/slic3r/GUI/MainFrame.cpp:751
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:477
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:481 src/slic3r/GUI/MainFrame.cpp:752
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:481
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:486
msgid "Export plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:486
msgid "Export current plate as STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export plate as STL &including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:489
msgid "Export current plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export plate as &AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Export current plate as AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:496
msgid "Export &toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:496
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:500
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:500
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:503
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:506
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:512
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:512
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:518
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:536
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:536
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:540
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:540
#, possible-c-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:565
msgid "&Select all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:566
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:568
msgid "D&eselect all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:569
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:572
msgid "&Delete selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:573
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:575
msgid "Delete &all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:576
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:580
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:583
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:588
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:589
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:591
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:592
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:596
msgid "Re&load from disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:597
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:606
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:614
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:614
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:617 src/slic3r/GUI/MainFrame.cpp:754
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:617
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:621
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:621
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:626
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:626
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:629
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:648
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:648
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:658
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:658
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:662 src/libslic3r/PrintConfig.cpp:2142
#: src/libslic3r/PrintConfig.cpp:2151
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:662
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:665 src/libslic3r/PrintConfig.cpp:164
#: src/libslic3r/PrintConfig.cpp:173
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:665
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:667
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:667
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:669 src/libslic3r/PrintConfig.cpp:1641
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:669
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:671
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:671
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:673
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:673
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:677
msgid "Show &labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:677
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:688
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:688
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:694
#, possible-c-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:695
#, possible-c-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:701
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:701
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:703
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:703
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:705
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:705
#, possible-c-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:707
#, possible-c-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:707
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:710
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:723
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:724
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:725
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:726
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:729
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:751
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:752
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:754
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:775
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:786
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:792
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:792
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:793
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:828
#, possible-c-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:828
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:828
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:840
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:849 src/slic3r/GUI/Plater.cpp:3107
#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Tab.cpp:1211
#: src/slic3r/GUI/Tab.cpp:3634
msgid "Slicing"
msgstr ""

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:851
#, possible-c-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:874
msgid " was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:876
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:891
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:901
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:913
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:913 src/libslic3r/PrintConfig.cpp:3442
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:927
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:946 src/slic3r/GUI/MainFrame.cpp:1008
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:982
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1029
#, possible-c-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:291
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:306
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:313
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:317
#: src/slic3r/GUI/Mouse3DController.cpp:337
#: src/slic3r/GUI/Mouse3DController.cpp:339
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:326
#: src/slic3r/GUI/Mouse3DController.cpp:337
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:332
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:73
#, possible-c-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:74
#, possible-c-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:56
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:60
#: src/slic3r/GUI/ObjectDataViewModel.cpp:216
#, possible-c-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:67 src/slic3r/GUI/Tab.cpp:3482
#: src/slic3r/GUI/Tab.cpp:3572
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:249
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:249
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:163
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:164
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:165
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:168
msgid "Manifold"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:218
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1226
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:238
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:239
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:240
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:241
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1213
#: src/slic3r/GUI/Plater.cpp:1255
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:243
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:340
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:495
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:497 src/libslic3r/PrintConfig.cpp:1911
#: src/libslic3r/PrintConfig.cpp:2675
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:498 src/slic3r/GUI/Plater.cpp:621
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:499
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:531 src/slic3r/GUI/Tab.cpp:1107
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:533
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:541
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:635
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:637
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:638
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:812
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:813 src/slic3r/GUI/Tab.cpp:1419
#: src/slic3r/GUI/Tab.cpp:1420
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:814
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:815 src/slic3r/GUI/Preset.cpp:1455
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:816
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:875 src/slic3r/GUI/Plater.cpp:5545
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:876
msgid "Remove device"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:877
msgid "Export to SD card/ USB thumb drive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:889 src/slic3r/GUI/Plater.cpp:3107
#: src/slic3r/GUI/Plater.cpp:5129
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1039
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1149
#, possible-c-format
msgid "%d (%d shells)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1154
#, possible-c-format
msgid "Auto-repaired (%d errors)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1157
#, possible-c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1167
msgid "Yes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1188
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1191
msgid "object(s)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1191
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1228 src/slic3r/GUI/Plater.cpp:1243
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1228 src/slic3r/GUI/Plater.cpp:1243
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1241 src/libslic3r/PrintConfig.cpp:761
#: src/libslic3r/PrintConfig.cpp:2511 src/libslic3r/PrintConfig.cpp:2512
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1258
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1262 src/slic3r/GUI/Plater.cpp:1271
#: src/libslic3r/PrintConfig.cpp:583
msgid "Color"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1267
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1375
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1379
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2137
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2259
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2269
#, possible-c-format
msgid "Processing input file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2297
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2298 src/slic3r/GUI/Tab.cpp:2929
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2343
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2346 src/slic3r/GUI/Plater.cpp:2399
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2353
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2354
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2376
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2396
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2412
msgid "Loaded"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2514
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2515
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2577
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2584
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2590
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2596
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2698
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2709
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2746
msgid "Hollow"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2753
msgid "Optimize Rotation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2799
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2821
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2827
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2828
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2844
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2877
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2878
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2908
msgid "Indexing hollowed object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2912
msgid "Hollowing cancelled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2913
msgid "Hollowing done."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2915
msgid "Hollowing failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2956
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2967
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3092
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3101
msgid "Ready to slice"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3139 src/slic3r/GUI/PrintHostDialogs.cpp:232
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3156
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3274
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3309
msgid "It is not allowed to change the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3309
msgid "Do you want to retry"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3330
msgid "Reload from: "
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3438
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3443
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3463
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3484
msgid "Fix Throught NetFabb"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3675
msgid "Export failed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3680 src/slic3r/GUI/PrintHostDialogs.cpp:233
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3942 src/slic3r/GUI/Plater.cpp:3969
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3956
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3958
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3960
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3960
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3980 src/slic3r/GUI/Plater.cpp:3983
msgid "Reload the selected object from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3987
msgid "Export the selected object as STL file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4016
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4016
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4018
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4018
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4020
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4020
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4023
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4023
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4035
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4035 src/slic3r/GUI/Plater.cpp:4055
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4037
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4037 src/slic3r/GUI/Plater.cpp:4069
msgid "Split the selected object into individual sub-parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4040 src/slic3r/GUI/Plater.cpp:4055
#: src/slic3r/GUI/Plater.cpp:4069 src/libslic3r/PrintConfig.cpp:3466
msgid "Split"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4040
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4061
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4061
msgid "Optimize the rotation of the object for better print results."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4120
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4128 src/slic3r/GUI/Tab.cpp:2372
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4422
msgid ""
"%1% printer was active at the time the target Undo / Redo snapshot was "
"taken. Switching to %1% printer requires reloading of %1% presets."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4597
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4625
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4629
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4693
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4701
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4709
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4744
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4780
#, possible-c-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4810
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4863
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4863
msgid "Save SL1 file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4990
#, possible-c-format
msgid "STL file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5011
#, possible-c-format
msgid "AMF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5014
#, possible-c-format
msgid "Error exporting AMF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5057
#, possible-c-format
msgid "3MF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5062
#, possible-c-format
msgid "Error exporting 3MF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5544
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5545
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5629
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1780
#: src/slic3r/GUI/Tab.cpp:2024
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:39
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:41
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:47
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:49
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:55
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:57
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:66
msgid ""
"If enabled, PrusaSlicer will check for the new versions of itself online. "
"When a new version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:73
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:75
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:84
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:89
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:91
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:97
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:99
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:106
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:108
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:115
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:121
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:123
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:129
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:131
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:137
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:147
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:149
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:176
#, possible-c-format
msgid "You need to restart %s to make the changes effective."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:226
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:241
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preset.cpp:247
msgid "modified"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1059 src/slic3r/GUI/Preset.cpp:1106
#: src/slic3r/GUI/Preset.cpp:1182 src/slic3r/GUI/Preset.cpp:1216
#: src/slic3r/GUI/PresetBundle.cpp:1576 src/slic3r/GUI/PresetBundle.cpp:1665
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1110 src/slic3r/GUI/Preset.cpp:1220
#: src/slic3r/GUI/PresetBundle.cpp:1670
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1141 src/slic3r/GUI/Tab.cpp:243
msgid "Add a new printer"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1143
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1453
msgid "filament"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1454
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/PresetBundle.cpp:1681
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:29
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:36
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:40
msgid "During the other layers, fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:42
msgid "Fan"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:48
msgid "will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:51
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:53
msgid "except for the first layer."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
msgid "will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:156
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:165
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:184
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:203
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:213
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:220
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:223
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:224
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:225
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:229
#, possible-c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:247
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:263
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
#, possible-c-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:300
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:313
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:316
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:319
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:332
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:335
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:338
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Start printing after upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:149
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:150
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:151
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:152
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:153
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:154
msgid "Error Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:157
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:159
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:198
#: src/slic3r/GUI/PrintHostDialogs.cpp:229
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:230
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:234
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:272
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
#: src/libslic3r/PrintConfig.cpp:645 src/libslic3r/PrintConfig.cpp:689
#: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:2418
#: src/libslic3r/PrintConfig.cpp:2427 src/libslic3r/PrintConfig.cpp:2528
#: src/libslic3r/PrintConfig.cpp:2536 src/libslic3r/PrintConfig.cpp:2544
#: src/libslic3r/PrintConfig.cpp:2551 src/libslic3r/PrintConfig.cpp:2559
#: src/libslic3r/PrintConfig.cpp:2567
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:602
#: src/libslic3r/PrintConfig.cpp:1259
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:146
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:187
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:219
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:238
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:256
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:275
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:376
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:402
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:939
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1475
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1475
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:78
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:154
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:255
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:53
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:270
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:59
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:135
#, possible-c-format
msgid "Save current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:136
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:141
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:943
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:945
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:947
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:950
#, possible-c-format
msgid ""
"Current preset is inherited from:\n"
"\t%s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:954
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:955
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:956
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:960
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:966
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:974
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:977
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:991
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:995
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1003
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1004
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1038 src/slic3r/GUI/Tab.cpp:3570
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1043
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1054
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1055 src/libslic3r/PrintConfig.cpp:1790
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1059
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1070
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1088
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1100
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1117
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1121
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1136
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1148
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1151
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1154
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1161
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1169
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1177
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1195
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1205
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1208
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1217
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1220 src/slic3r/GUI/Tab.cpp:3637
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1221
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1223
msgid "Extruder clearance (mm)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1232 src/slic3r/GUI/Tab.cpp:3638
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1239 src/libslic3r/PrintConfig.cpp:1462
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1245 src/slic3r/GUI/Tab.cpp:1246
#: src/slic3r/GUI/Tab.cpp:1531 src/slic3r/GUI/Tab.cpp:1532
#: src/slic3r/GUI/Tab.cpp:1996 src/slic3r/GUI/Tab.cpp:1997
#: src/slic3r/GUI/Tab.cpp:2110 src/slic3r/GUI/Tab.cpp:2111
#: src/slic3r/GUI/Tab.cpp:3507 src/slic3r/GUI/Tab.cpp:3508
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1252 src/slic3r/GUI/Tab.cpp:1539
#: src/slic3r/GUI/Tab.cpp:2003 src/slic3r/GUI/Tab.cpp:2117
#: src/slic3r/GUI/Tab.cpp:3515 src/slic3r/GUI/Tab.cpp:3643
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1253 src/slic3r/GUI/Tab.cpp:1540
#: src/slic3r/GUI/Tab.cpp:2004 src/slic3r/GUI/Tab.cpp:2118
#: src/slic3r/GUI/Tab.cpp:3516 src/slic3r/GUI/Tab.cpp:3644
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1317 src/slic3r/GUI/Tab.cpp:1372
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1318 src/slic3r/GUI/Tab.cpp:1377
#: src/slic3r/GUI/Tab.cpp:2352
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1427 src/libslic3r/PrintConfig.cpp:2077
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1433
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1438
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1439 src/libslic3r/PrintConfig.cpp:1364
#: src/libslic3r/PrintConfig.cpp:2210
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1450
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1459
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1465
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1469
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1479
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1482
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1496
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1518 src/slic3r/GUI/Tab.cpp:1959
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1519 src/slic3r/GUI/Tab.cpp:1960
#: src/libslic3r/PrintConfig.cpp:1823 src/libslic3r/PrintConfig.cpp:1838
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1525 src/slic3r/GUI/Tab.cpp:1966
#: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:395
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1582
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1668 src/slic3r/GUI/Tab.cpp:1899
msgid "Test"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1678
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1684 src/slic3r/GUI/Tab.cpp:1912
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1699
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1712
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1713
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1741
#, possible-c-format
msgid ""
"HTTPS CA File:\n"
"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"    \tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1781 src/slic3r/GUI/Tab.cpp:2025
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1786 src/slic3r/GUI/Tab.cpp:2030
#: src/slic3r/GUI/Tab.cpp:3146
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1818
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1823
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1851
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1854 src/slic3r/GUI/Tab.cpp:2322
#: src/libslic3r/PrintConfig.cpp:1335
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1884
msgid "USB/Serial connection"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1885 src/libslic3r/PrintConfig.cpp:1670
msgid "Serial port"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1890
msgid "Rescan serial ports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1912
msgid "Connection to printer works correctly."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1915
msgid "Connection failed."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1928 src/slic3r/GUI/Tab.cpp:2105
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1972 src/libslic3r/PrintConfig.cpp:143
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1978 src/libslic3r/PrintConfig.cpp:1081
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1984 src/libslic3r/PrintConfig.cpp:2103
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1990
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2062
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2077
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2078
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2084 src/slic3r/GUI/Tab.cpp:3489
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2099 src/slic3r/GUI/Tab.cpp:3485
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2170 src/slic3r/GUI/Tab.cpp:2255
#: src/libslic3r/PrintConfig.cpp:1131 src/libslic3r/PrintConfig.cpp:1149
#: src/libslic3r/PrintConfig.cpp:1167 src/libslic3r/PrintConfig.cpp:1184
#: src/libslic3r/PrintConfig.cpp:1195 src/libslic3r/PrintConfig.cpp:1206
#: src/libslic3r/PrintConfig.cpp:1217
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2184
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2185
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2190
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2191
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2199
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2204
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2211
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2216
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2280 src/slic3r/GUI/Tab.cpp:2288
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2289
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2320
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2344
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2349
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2355
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2368
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2376
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2557
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2559
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2889
#, possible-c-format
msgid "Default preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2890
#, possible-c-format
msgid "Preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2907
msgid "has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2910
msgid "is not compatible with printer"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2911
msgid "is not compatible with print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2913
msgid "and it has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2917
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3015
msgctxt "PresetName"
msgid "%1% - Copy"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3038
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3043
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3047
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3052
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3053
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3091
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3091
msgid "delete"
msgstr ""

#. TRN  remove/delete
#: src/slic3r/GUI/Tab.cpp:3093
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3096
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3222
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3224
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3226
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3228
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3233
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3235
msgid ""
"for the left button: \tindicates a non-system (or non-default) preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3238
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3240
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3250
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3252
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3255
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3258
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3260
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3266
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3267
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3273
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3274
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#. TRN Preset
#: src/slic3r/GUI/Tab.cpp:3387
#, possible-c-format
msgid "Save %s as:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3431
msgid "the following suffix is not allowed:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3435
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3448 src/slic3r/GUI/Tab.cpp:3450
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3580
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3585
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3599
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3604
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:327 src/slic3r/GUI/Tab.hpp:429
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:354
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:390
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:414
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:441
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, possible-c-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:53
msgid "Changelog && Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125
#: src/slic3r/GUI/UpdateDialogs.cpp:183
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173
msgid "Comment:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210
#, possible-c-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:148
msgid "Configuration update is necessary to install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
#, possible-c-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246
#, possible-c-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:211
#, possible-c-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:216
#, possible-c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:225
#, possible-c-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:230
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:249
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270
#, possible-c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:286
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:303
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:303
msgid "No updates aviable"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:308
#, possible-c-format
msgid "%s has no configuration updates aviable."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:15
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:41
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:83
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:85
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:89
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:91
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:254
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:255
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:263
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:264
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:276
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:285
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:286
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:365
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:680
#, possible-c-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:681
#, possible-c-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:68 src/slic3r/Utils/OctoPrint.cpp:68
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:83
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:89
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:89
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:49
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:54
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:82 src/slic3r/Utils/Duet.cpp:137
#: src/slic3r/Utils/FlashAir.cpp:119 src/slic3r/Utils/FlashAir.cpp:140
#: src/slic3r/Utils/FlashAir.cpp:156
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:131
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:134
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model..."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:369
#: src/slic3r/Utils/FixModelByWin10.cpp:374
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:390
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:392
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:394
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:398
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:407
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:413
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:430
msgid "Model repaired successfully"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:430
#: src/slic3r/Utils/FixModelByWin10.cpp:433
msgid "Model Repair by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:433
msgid "Model repair failed:"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:73
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:73
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:83
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:176
msgid "Connection to Prusa SL1 works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:181
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:705
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:710
#, possible-c-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:713
#, possible-c-format
msgid "requires max. %s"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:691
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/Zipper.cpp:32
msgid "undefined error"
msgstr ""

#: src/libslic3r/Zipper.cpp:34
msgid "too many files"
msgstr ""

#: src/libslic3r/Zipper.cpp:36
msgid "file too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:38
msgid "unsupported method"
msgstr ""

#: src/libslic3r/Zipper.cpp:40
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/Zipper.cpp:42
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/Zipper.cpp:44
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/Zipper.cpp:46
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:48
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:50
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:52
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:54
msgid "compression failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:56
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/Zipper.cpp:58
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:60
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/Zipper.cpp:62
msgid "allocation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:64
msgid "file open failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:66
msgid "file create failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:68
msgid "file write failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:70
msgid "file read failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:72
msgid "file close failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:74
msgid "file seek failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:76
msgid "file stat failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:78
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/Zipper.cpp:80
msgid "invalid filename"
msgstr ""

#: src/libslic3r/Zipper.cpp:82
msgid "buffer too small"
msgstr ""

#: src/libslic3r/Zipper.cpp:84
msgid "internal error"
msgstr ""

#: src/libslic3r/Zipper.cpp:86
msgid "file not found"
msgstr ""

#: src/libslic3r/Zipper.cpp:88
msgid "archive is too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:90
msgid "validation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:92
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:102
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/GCode.cpp:637
msgid "Empty layers detected, the output would not be printable."
msgstr ""

#: src/libslic3r/GCode.cpp:638
msgid "Print z"
msgstr ""

#: src/libslic3r/GCode.cpp:639
msgid ""
"This is usually caused by negligibly small extrusions or by a faulty model. "
"Try to repair  the model or change its orientation on the bed."
msgstr ""

#: src/libslic3r/ExtrusionEntity.cpp:323
msgid "Mixed"
msgstr ""

#: src/libslic3r/Flow.cpp:55
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1630
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:934
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Print.cpp:1158
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:1161
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:1188
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:1203
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:1213
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr ""

#: src/libslic3r/Print.cpp:1220
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:1233
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1238
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:1240
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:1242
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""

#: src/libslic3r/Print.cpp:1244
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:1246
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:1267
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:1269
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:1271
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:1273
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:1315
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:1341
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:1350
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1353
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1364
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1372
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:1376
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/libslic3r/Print.cpp:1398
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1403
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1557
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:1577
msgid "Generating skirt"
msgstr ""

#: src/libslic3r/Print.cpp:1585
msgid "Generating brim"
msgstr ""

#: src/libslic3r/Print.cpp:1609
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1613
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:613
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:625
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:631
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:646
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:653
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:760
msgid "Slicing done"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:41
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:42
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:43
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:44 src/libslic3r/SLAPrintSteps.cpp:308
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:45
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:46
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:47
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:62
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:63
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:154
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:202
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:365 src/libslic3r/SLAPrintSteps.cpp:374
#: src/libslic3r/SLAPrintSteps.cpp:413
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:405
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:579
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:71
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:56
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:61
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:66
msgid "Picture sizes to be stored into a .gcode and .sl1 files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:73
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:80
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:81
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:87
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:89
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:97
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:98
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:104
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:105
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:111
msgid "HTTPS CA File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:112
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:126
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:127
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:134 src/libslic3r/PrintConfig.cpp:2074
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:135
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:137
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:144
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:154
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:155
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:166
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:167
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:175
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:177
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:183
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:184
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:186 src/libslic3r/PrintConfig.cpp:329
#: src/libslic3r/PrintConfig.cpp:863 src/libslic3r/PrintConfig.cpp:985
#: src/libslic3r/PrintConfig.cpp:1155 src/libslic3r/PrintConfig.cpp:1208
#: src/libslic3r/PrintConfig.cpp:1219 src/libslic3r/PrintConfig.cpp:1412
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:192
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:194
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:197 src/libslic3r/PrintConfig.cpp:781
#: src/libslic3r/PrintConfig.cpp:1649 src/libslic3r/PrintConfig.cpp:1659
#: src/libslic3r/PrintConfig.cpp:1904 src/libslic3r/PrintConfig.cpp:2059
#: src/libslic3r/PrintConfig.cpp:2257 src/libslic3r/PrintConfig.cpp:2728
#: src/libslic3r/PrintConfig.cpp:2849
msgid "°"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:203
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:204
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:205 src/libslic3r/PrintConfig.cpp:793
#: src/libslic3r/PrintConfig.cpp:1228 src/libslic3r/PrintConfig.cpp:1291
#: src/libslic3r/PrintConfig.cpp:1541 src/libslic3r/PrintConfig.cpp:2435
#: src/libslic3r/PrintConfig.cpp:2768
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:212
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:214
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:224
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:226
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:227 src/libslic3r/PrintConfig.cpp:610
#: src/libslic3r/PrintConfig.cpp:618 src/libslic3r/PrintConfig.cpp:627
#: src/libslic3r/PrintConfig.cpp:635 src/libslic3r/PrintConfig.cpp:662
#: src/libslic3r/PrintConfig.cpp:681 src/libslic3r/PrintConfig.cpp:923
#: src/libslic3r/PrintConfig.cpp:1051 src/libslic3r/PrintConfig.cpp:1137
#: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:1186
#: src/libslic3r/PrintConfig.cpp:1197 src/libslic3r/PrintConfig.cpp:1250
#: src/libslic3r/PrintConfig.cpp:1309 src/libslic3r/PrintConfig.cpp:1442
#: src/libslic3r/PrintConfig.cpp:1616 src/libslic3r/PrintConfig.cpp:1625
#: src/libslic3r/PrintConfig.cpp:2038 src/libslic3r/PrintConfig.cpp:2164
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:234
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:235
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:242
msgid "Clip multi-part objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:243
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:250
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:251
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:261
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:262
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:276
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:277
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:294
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:295
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:303
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:304
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:309
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:310
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:317
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:318
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:326
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:335
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:336
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:342
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:343 src/libslic3r/PrintConfig.cpp:2593
#: src/libslic3r/PrintConfig.cpp:2604
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:349
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:350
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:359
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:361
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:367
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:368
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:375
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:377
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:386
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:396
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:407
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:409
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:415
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:417
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:844
#: src/libslic3r/PrintConfig.cpp:2019
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:850
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:427 src/libslic3r/PrintConfig.cpp:854
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:428 src/libslic3r/PrintConfig.cpp:855
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:856
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:435
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:437
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:457
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:448
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:560
#: src/libslic3r/PrintConfig.cpp:883 src/libslic3r/PrintConfig.cpp:896
#: src/libslic3r/PrintConfig.cpp:1016 src/libslic3r/PrintConfig.cpp:1042
#: src/libslic3r/PrintConfig.cpp:1432 src/libslic3r/PrintConfig.cpp:1771
#: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:1961
#: src/libslic3r/PrintConfig.cpp:2121
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:459
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:905
#: src/libslic3r/PrintConfig.cpp:1730 src/libslic3r/PrintConfig.cpp:1782
#: src/libslic3r/PrintConfig.cpp:2005 src/libslic3r/PrintConfig.cpp:2134
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:469
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:471
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:477
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:479
#, no-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:489
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:501
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:512
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:522
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:584
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:529
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:530
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:539
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:540
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:545
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:546
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:554
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:556
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:566
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:567
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:572
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:573
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:1717
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:589
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:590
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:598 src/libslic3r/PrintConfig.cpp:1256
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:599
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:608
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:609
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:616
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:617
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:624
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:625
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:633
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:634
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:641
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:642
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:651
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:652
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:660
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:661
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:668
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:669
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:673
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:679
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:680
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:687
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:688
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:695
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:696
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:702
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:703
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:711
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:718 src/libslic3r/PrintConfig.cpp:2504
#: src/libslic3r/PrintConfig.cpp:2505
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:719
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:722
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:727
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:728
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:755
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:756
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:762
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:763
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:772 src/libslic3r/PrintConfig.cpp:2588
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:776
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:778
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:790
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:792
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:827
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:829
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:845
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:846
msgid "Triangles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:847
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:848
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:849
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:851 src/libslic3r/PrintConfig.cpp:2021
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:852
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:853
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:869
#: src/libslic3r/PrintConfig.cpp:877 src/libslic3r/PrintConfig.cpp:911
msgid "First layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:861
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:870
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:879
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:892
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:901
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:902
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:912
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:921
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:929
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:930
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:937
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:938
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:961
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:966
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:967
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:974
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:975
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:983
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:991
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:993
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:996
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1002
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1004
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1012
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1022
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1023
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1028
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1030
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1037
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1039
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1050
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1058
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1059
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1072
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1073
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1082
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1093
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1094
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1102
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1103
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1127
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1128
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1129
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1130
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1133
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1134
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1135
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1136
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1145
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1146
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1147
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1148
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1151
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1152
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1153
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1154
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1163
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1164
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1165
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1166
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1169
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1170
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1171
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1172
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1183
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1185
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1194
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1196
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1205
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1207
msgid "Maximum acceleration when extruding (M204 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1216
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1218
msgid "Maximum acceleration when retracting (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1226 src/libslic3r/PrintConfig.cpp:1235
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1227
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1236
#, no-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1246
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1247
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1257
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1266
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1267 src/libslic3r/PrintConfig.cpp:1278
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1271 src/libslic3r/PrintConfig.cpp:1282
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1277
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1289 src/libslic3r/PrintConfig.cpp:1298
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1290
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1299
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1307
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1308
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1315
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1316
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1325
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1326
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1336
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1341
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1342
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1357
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1358
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1365
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1372
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1373
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1382
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1384
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1390
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1391
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1399
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1400
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1408 src/libslic3r/PrintConfig.cpp:1426
#: src/libslic3r/PrintConfig.cpp:1439 src/libslic3r/PrintConfig.cpp:1449
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1409
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1417
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1419
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1428
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1441
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1451
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1455
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1463
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1475
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1476
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1481
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1482
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1490
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1491
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1496
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1497
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1510
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1512
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1520
msgid "Resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1521
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1531
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1532
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1538
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1539
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1546
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1547
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1552 src/libslic3r/PrintConfig.cpp:1560
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1553
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1554
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1556 src/libslic3r/PrintConfig.cpp:1565
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1561
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1562
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1570
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1571
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1578
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1579
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1580
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1587
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1588
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1589
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1597 src/libslic3r/PrintConfig.cpp:1605
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1598
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1606
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1613 src/libslic3r/PrintConfig.cpp:1614
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1615
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1621 src/libslic3r/PrintConfig.cpp:1622
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1623
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1630
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1632
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1638
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1640
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1648
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1650
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1651
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1658
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1660
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1661
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1671
msgid "USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1678
msgid "Serial port speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1688
msgid "Distance from object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1689
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1696
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1697
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1704
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1705
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1706
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1714
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1715
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1725
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1727
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1737
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1739
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1740
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1746
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1748
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1754
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1756
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1768
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1779
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1791
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1797 src/libslic3r/PrintConfig.cpp:1798
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1804
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1805
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1813
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1814
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1824
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1839
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1855
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1856
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1861
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1862
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1867
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1868
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1875
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1877
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1881
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1883
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1889
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1891
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1901
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1903
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1913 src/libslic3r/PrintConfig.cpp:2677
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1919
msgid "Contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1921
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1928
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1929
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1934
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1936
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1941
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1947
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1949
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1958
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1967
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1969
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1974
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1976
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1983
msgid "Interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1985
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1992
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1994
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2003
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2012
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2014
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2020
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2026
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2028
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2037
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2044
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2046
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2052
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2054
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2066
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2068
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2075
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2083
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2085
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2091
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2092
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2104
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {previous_extruder} and "
"{next_extruder} can be used. When a tool-changing command which changes to "
"the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2117
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2129
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2144
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2145
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2153
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2156
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2163
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2171
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2172
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2178
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2179
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2185
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2186
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2196
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2197
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2203
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2204
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2211
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2217
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2218
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2224
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2225
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2234
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2235
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2241
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2242
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2249
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2255
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2256
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2263
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2264
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2271
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2272
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2278
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2279
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2285
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2287
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2295
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2296
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2363
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2364
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2369
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2370
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2375
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2377
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2383
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2388
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2389
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2390
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2395
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2396
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2397
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2402
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2403
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2409
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2410
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2415
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2416
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2417
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2424
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2425
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2426
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2433
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2434
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2441 src/libslic3r/PrintConfig.cpp:2442
#: src/libslic3r/PrintConfig.cpp:2443
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2450
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2451
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2457 src/libslic3r/PrintConfig.cpp:2458
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2459
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2471 src/libslic3r/PrintConfig.cpp:2472
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2483 src/libslic3r/PrintConfig.cpp:2484
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2490 src/libslic3r/PrintConfig.cpp:2491
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2492
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2497 src/libslic3r/PrintConfig.cpp:2498
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2499
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2506
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2513
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2518
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2519
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2526 src/libslic3r/PrintConfig.cpp:2527
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2534 src/libslic3r/PrintConfig.cpp:2535
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2542 src/libslic3r/PrintConfig.cpp:2543
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2549 src/libslic3r/PrintConfig.cpp:2550
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2557 src/libslic3r/PrintConfig.cpp:2558
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2565 src/libslic3r/PrintConfig.cpp:2566
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2572 src/libslic3r/PrintConfig.cpp:2573
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2579
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2580
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2592 src/libslic3r/PrintConfig.cpp:2603
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2614
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2616
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2621
msgid "Support head front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2623
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2630
msgid "Support head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2632
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2639
msgid "Support head width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2641
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2649
msgid "Support pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2651
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2659
msgid "Support pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2660
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2668
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2669
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2670
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2682
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2684
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2693
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2695
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2703
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2705
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2712
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2715
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2725
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2727
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2735
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2737
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2744
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2746
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2754
msgid "Object elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2756
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2767
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2773
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2775
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2781
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2783
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2788
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2790
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2798
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2799
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2812
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2813
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2823
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2825
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2845
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2847
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2856
msgid "Pad around object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2858
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2863
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2865
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2870
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2872
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2881
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2883
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2890
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2892
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2899
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2902
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2909
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2911
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2916
msgid "Hollowing thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2918
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2926
msgid "Hollowing accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2928
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2935
msgid "Hollowing closing distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3315
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3316
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3327
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3328
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3333
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3334
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3338
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3339
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3343
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3344
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3349
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3354
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3355
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3360
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3361
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3366
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3367
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3371
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3372
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3376
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3377
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3381
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3382
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3392
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3393
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3398
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3419
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3420
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3424
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3425
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3428
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3429
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3433
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3434
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3437
msgid "Merge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3438
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3443
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3447
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3451
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3452
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3456
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3457
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3462
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3467
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3470
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3471
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3480
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3481
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3484
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3485
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3488
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3489
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3499
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3500
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3503
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3504
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3510
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3511
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/PrintObject.cpp:108
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObject.cpp:152
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:255
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:395
msgid "Generating support material"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:347
msgid "Height (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:349
msgid "Width (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:351
msgid "Speed (mm/s)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:353
msgid "Fan Speed (%)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:355
msgid "Volumetric flow rate (mm³/s)"
msgstr ""