#include "Flow.hpp"
#include "I18N.hpp"
#include "Print.hpp"
#include <cmath>
#include <assert.h>

#include <boost/algorithm/string/predicate.hpp>

// Overlap factor of perimeter lines. Currently no overlap.
// #define HAS_PERIMETER_LINE_OVERLAP
#ifdef HAS_PERIMETER_LINE_OVERLAP
    #define PERIMETER_LINE_OVERLAP_FACTOR 1.0
#endif

// Mark string for localization and translate.
#define L(s) Slic3r::I18N::translate(s)

namespace Slic3r {

FlowErrorNegativeSpacing::FlowErrorNegativeSpacing() : 
	FlowError("Flow::spacing() produced negative spacing. Did you set some extrusion width too small?") {}

FlowErrorNegativeFlow::FlowErrorNegativeFlow() :
    FlowError("Flow::mm3_per_mm() produced negative flow. Did you set some extrusion width too small?") {}

// This static method returns a sane extrusion width default.
float Flow::auto_extrusion_width(FlowRole role, float nozzle_diameter)
{
    switch (role) {
    case frSupportMaterial:
    case frSupportMaterialInterface:
    case frTopSolidInfill:
        return nozzle_diameter;
    default:
    case frExternalPerimeter:
    case frPerimeter:
    case frSolidInfill:
    case frInfill:
        return 1.125f * nozzle_diameter;
    }
}

// Used by the Flow::extrusion_width() funtion to provide hints to the user on default extrusion width values,
// and to provide reasonable values to the PlaceholderParser.
static inline FlowRole opt_key_to_flow_role(const std::string &opt_key)
{
 	if (opt_key == "perimeter_extrusion_width" || 
 		// or all the defaults:
 		opt_key == "extrusion_width" || opt_key == "first_layer_extrusion_width")
        return frPerimeter;
    else if (opt_key == "external_perimeter_extrusion_width")
        return frExternalPerimeter;
    else if (opt_key == "infill_extrusion_width")
        return frInfill;
    else if (opt_key == "solid_infill_extrusion_width")
        return frSolidInfill;
	else if (opt_key == "top_infill_extrusion_width")
		return frTopSolidInfill;
	else if (opt_key == "support_material_extrusion_width")
    	return frSupportMaterial;
    else 
    	throw Slic3r::RuntimeError("opt_key_to_flow_role: invalid argument");
};

static inline void throw_on_missing_variable(const std::string &opt_key, const char *dependent_opt_key) 
{
	throw FlowErrorMissingVariable((boost::format(L("Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible.")) % opt_key % dependent_opt_key).str());
}

// Used to provide hints to the user on default extrusion width values, and to provide reasonable values to the PlaceholderParser.
double Flow::extrusion_width(const std::string& opt_key, const ConfigOptionFloatOrPercent* opt, const ConfigOptionResolver& config, const unsigned int first_printing_extruder)
{
	assert(opt != nullptr);

	bool first_layer = boost::starts_with(opt_key, "first_layer_");

#if 0
// This is the logic used for skit / brim, but not for the rest of the 1st layer.
	if (opt->value == 0. && first_layer) {
		// The "first_layer_extrusion_width" was set to zero, try a substitute.
		opt = config.option<ConfigOptionFloatOrPercent>("perimeter_extrusion_width");
		if (opt == nullptr)
    		throw_on_missing_variable(opt_key, "perimeter_extrusion_width");
	}
#endif

	if (opt->value == 0.) {
		// The role specific extrusion width value was set to zero, try the role non-specific extrusion width.
		opt = config.option<ConfigOptionFloatOrPercent>("extrusion_width");
		if (opt == nullptr)
    		throw_on_missing_variable(opt_key, "extrusion_width");
    	// Use the "layer_height" instead of "first_layer_height".
    	first_layer = false;
	}

	if (opt->percent) {
		auto opt_key_layer_height = first_layer ? "first_layer_height" : "layer_height";
    	auto opt_layer_height = config.option(opt_key_layer_height);
    	if (opt_layer_height == nullptr)
    		throw_on_missing_variable(opt_key, opt_key_layer_height);
    	double layer_height = opt_layer_height->getFloat();
    	if (first_layer && static_cast<const ConfigOptionFloatOrPercent*>(opt_layer_height)->percent) {
    		// first_layer_height depends on layer_height.
	    	opt_layer_height = config.option("layer_height");
	    	if (opt_layer_height == nullptr)
	    		throw_on_missing_variable(opt_key, "layer_height");
	    	layer_height *= 0.01 * opt_layer_height->getFloat();
    	}
		return opt->get_abs_value(layer_height);
	}

	if (opt->value == 0.) {
        // If user left option to 0, calculate a sane default width.
    	auto opt_nozzle_diameters = config.option<ConfigOptionFloats>("nozzle_diameter");
    	if (opt_nozzle_diameters == nullptr)
    		throw_on_missing_variable(opt_key, "nozzle_diameter");
        return auto_extrusion_width(opt_key_to_flow_role(opt_key), float(opt_nozzle_diameters->get_at(first_printing_extruder)));
    }

	return opt->value;
}

// Used to provide hints to the user on default extrusion width values, and to provide reasonable values to the PlaceholderParser.
double Flow::extrusion_width(const std::string& opt_key, const ConfigOptionResolver &config, const unsigned int first_printing_extruder)
{
    return extrusion_width(opt_key, config.option<ConfigOptionFloatOrPercent>(opt_key), config, first_printing_extruder);
}

// This constructor builds a Flow object from an extrusion width config setting
// and other context properties.
Flow Flow::new_from_config_width(FlowRole role, const ConfigOptionFloatOrPercent &width, float nozzle_diameter, float height)
{
    if (height <= 0)
        throw Slic3r::InvalidArgument("Invalid flow height supplied to new_from_config_width()");

    float w;
    if (! width.percent && width.value == 0.) {
        // If user left option to 0, calculate a sane default width.
        w = auto_extrusion_width(role, nozzle_diameter);
    } else {
        // If user set a manual value, use it.
        w = float(width.get_abs_value(height));
    }
    
    return Flow(w, height, nozzle_diameter, false);
}

// This constructor builds a Flow object from a given centerline spacing.
Flow Flow::new_from_spacing(float spacing, float nozzle_diameter, float height) 
{
    if (height <= 0) 
        throw Slic3r::InvalidArgument("Invalid flow height supplied to new_from_spacing()");
    // Calculate width from spacing.
    // For normal extrusons, extrusion width is wider than the spacing due to the rounding and squishing of the extrusions.
    float width = float(
#ifdef HAS_PERIMETER_LINE_OVERLAP
        (spacing + PERIMETER_LINE_OVERLAP_FACTOR * height * (1. - 0.25 * PI));
#else
        (spacing + height * (1. - 0.25 * PI)));
#endif
    return Flow(width, height, nozzle_diameter);
}

// This method returns the centerline spacing between two adjacent extrusions 
// having the same extrusion width (and other properties).
float Flow::spacing() const 
{
#ifdef HAS_PERIMETER_LINE_OVERLAP
    if (m_bridge)
        return m_width + BRIDGE_EXTRA_SPACING;
    // rectangle with semicircles at the ends
    float min_flow_spacing = m_width - m_height * (1. - 0.25 * PI);
    float res = m_width - PERIMETER_LINE_OVERLAP_FACTOR * (m_width - min_flow_spacing);
#else
    float res = float(m_bridge ? (m_width + BRIDGE_EXTRA_SPACING) : (m_width - m_height * (1. - 0.25 * PI)));
#endif
//    assert(res > 0.f);
	if (res <= 0.f)
		throw FlowErrorNegativeSpacing();
	return res;
}

// This method returns the centerline spacing between an extrusion using this
// flow and another one using another flow.
// this->spacing(other) shall return the same value as other.spacing(*this)
float Flow::spacing(const Flow &other) const
{
    assert(m_height == other.m_height);
    assert(m_bridge == other.m_bridge);
    float res = float(m_bridge ? 
        0.5 * m_width + 0.5 * other.m_width + BRIDGE_EXTRA_SPACING :
        0.5 * this->spacing() + 0.5 * other.spacing());
//    assert(res > 0.f);
	if (res <= 0.f)
		throw FlowErrorNegativeSpacing();
	return res;
}

// This method returns extrusion volume per head move unit.
double Flow::mm3_per_mm() const 
{
    float res = m_bridge ?
        // Area of a circle with dmr of this->width.
        float((m_width * m_width) * 0.25 * PI) :
        // Rectangle with semicircles at the ends. ~ h (w - 0.215 h)
        float(m_height * (m_width - m_height * (1. - 0.25 * PI)));
    //assert(res > 0.);
	if (res <= 0.)
		throw FlowErrorNegativeFlow();
    return res;
}

Flow support_material_flow(const PrintObject *object, float layer_height)
{
    return Flow::new_from_config_width(
        frSupportMaterial,
        // The width parameter accepted by new_from_config_width is of type ConfigOptionFloatOrPercent, the Flow class takes care of the percent to value substitution.
        (object->config().support_material_extrusion_width.value > 0) ? object->config().support_material_extrusion_width : object->config().extrusion_width,
        // if object->config().support_material_extruder == 0 (which means to not trigger tool change, but use the current extruder instead), get_at will return the 0th component.
        float(object->print()->config().nozzle_diameter.get_at(object->config().support_material_extruder-1)),
        (layer_height > 0.f) ? layer_height : float(object->config().layer_height.value));
}

Flow support_material_1st_layer_flow(const PrintObject *object, float layer_height)
{
    const auto &width = (object->print()->config().first_layer_extrusion_width.value > 0) ? object->print()->config().first_layer_extrusion_width : object->config().support_material_extrusion_width;
    return Flow::new_from_config_width(
        frSupportMaterial,
        // The width parameter accepted by new_from_config_width is of type ConfigOptionFloatOrPercent, the Flow class takes care of the percent to value substitution.
        (width.value > 0) ? width : object->config().extrusion_width,
        float(object->print()->config().nozzle_diameter.get_at(object->config().support_material_extruder-1)),
        (layer_height > 0.f) ? layer_height : float(object->config().first_layer_height.get_abs_value(object->config().layer_height.value)));
}

Flow support_material_interface_flow(const PrintObject *object, float layer_height)
{
    return Flow::new_from_config_width(
        frSupportMaterialInterface,
        // The width parameter accepted by new_from_config_width is of type ConfigOptionFloatOrPercent, the Flow class takes care of the percent to value substitution.
        (object->config().support_material_extrusion_width > 0) ? object->config().support_material_extrusion_width : object->config().extrusion_width,
        // if object->config().support_material_interface_extruder == 0 (which means to not trigger tool change, but use the current extruder instead), get_at will return the 0th component.
        float(object->print()->config().nozzle_diameter.get_at(object->config().support_material_interface_extruder-1)),
        (layer_height > 0.f) ? layer_height : float(object->config().layer_height.value));
}

}