# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-12-18 13:59+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:299 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:135 src/slic3r/GUI/AboutDialog.cpp:263 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:137 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:206 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:238 src/slic3r/GUI/AboutDialog.cpp:361 #: src/slic3r/GUI/GUI_App.cpp:235 src/slic3r/GUI/MainFrame.cpp:151 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:265 src/slic3r/GUI/GUI_App.cpp:240 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:266 src/slic3r/GUI/GUI_App.cpp:240 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:267 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:268 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:304 msgid "Copy Version Info" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:78 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183 msgid "Unknown error occured during exporting G-code." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?\n" "Error message: %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:171 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:174 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:177 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:180 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:187 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:536 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:189 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:194 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:243 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:238 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:539 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:562 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162 #: src/slic3r/GUI/Tab.cpp:2536 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:94 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:771 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:110 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:121 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:242 #: src/slic3r/GUI/ConfigWizard.cpp:1368 src/slic3r/GUI/ConfigWizard.cpp:1382 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:88 #: src/slic3r/GUI/GCodeViewer.cpp:2337 src/slic3r/GUI/GCodeViewer.cpp:2343 #: src/slic3r/GUI/GCodeViewer.cpp:2351 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:77 #: src/libslic3r/PrintConfig.cpp:84 src/libslic3r/PrintConfig.cpp:95 #: src/libslic3r/PrintConfig.cpp:135 src/libslic3r/PrintConfig.cpp:244 #: src/libslic3r/PrintConfig.cpp:302 src/libslic3r/PrintConfig.cpp:377 #: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:435 #: src/libslic3r/PrintConfig.cpp:565 src/libslic3r/PrintConfig.cpp:576 #: src/libslic3r/PrintConfig.cpp:594 src/libslic3r/PrintConfig.cpp:774 #: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:1439 #: src/libslic3r/PrintConfig.cpp:1500 src/libslic3r/PrintConfig.cpp:1518 #: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1594 #: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1729 #: src/libslic3r/PrintConfig.cpp:1737 src/libslic3r/PrintConfig.cpp:1778 #: src/libslic3r/PrintConfig.cpp:1786 src/libslic3r/PrintConfig.cpp:1796 #: src/libslic3r/PrintConfig.cpp:1804 src/libslic3r/PrintConfig.cpp:1812 #: src/libslic3r/PrintConfig.cpp:1875 src/libslic3r/PrintConfig.cpp:2141 #: src/libslic3r/PrintConfig.cpp:2212 src/libslic3r/PrintConfig.cpp:2246 #: src/libslic3r/PrintConfig.cpp:2375 src/libslic3r/PrintConfig.cpp:2454 #: src/libslic3r/PrintConfig.cpp:2461 src/libslic3r/PrintConfig.cpp:2468 #: src/libslic3r/PrintConfig.cpp:2498 src/libslic3r/PrintConfig.cpp:2508 #: src/libslic3r/PrintConfig.cpp:2518 src/libslic3r/PrintConfig.cpp:2678 #: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2851 #: src/libslic3r/PrintConfig.cpp:2860 src/libslic3r/PrintConfig.cpp:2869 #: src/libslic3r/PrintConfig.cpp:2879 src/libslic3r/PrintConfig.cpp:2944 #: src/libslic3r/PrintConfig.cpp:2954 src/libslic3r/PrintConfig.cpp:2966 #: src/libslic3r/PrintConfig.cpp:2986 src/libslic3r/PrintConfig.cpp:2996 #: src/libslic3r/PrintConfig.cpp:3006 src/libslic3r/PrintConfig.cpp:3024 #: src/libslic3r/PrintConfig.cpp:3039 src/libslic3r/PrintConfig.cpp:3053 #: src/libslic3r/PrintConfig.cpp:3064 src/libslic3r/PrintConfig.cpp:3077 #: src/libslic3r/PrintConfig.cpp:3122 src/libslic3r/PrintConfig.cpp:3132 #: src/libslic3r/PrintConfig.cpp:3141 src/libslic3r/PrintConfig.cpp:3151 #: src/libslic3r/PrintConfig.cpp:3167 src/libslic3r/PrintConfig.cpp:3191 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:131 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:141 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:142 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:243 #: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:358 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:145 msgid "Invalid" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222 #: src/slic3r/GUI/GUI_ObjectList.cpp:2288 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:243 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1826 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:315 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413 #: src/slic3r/GUI/Tab.cpp:3484 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:395 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:563 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619 #: src/slic3r/GUI/BedShapeDialog.cpp:642 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:581 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:589 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:593 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:608 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:631 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1327 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:48 msgid "" "Zero layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:49 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1387 #: src/libslic3r/PrintConfig.cpp:73 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:60 msgid "" "Zero first layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:969 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:81 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:89 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:90 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:115 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:119 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:120 #: src/slic3r/GUI/ConfigManipulation.cpp:140 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:136 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:139 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:159 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:162 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:163 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:198 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:201 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:202 #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93 #: src/slic3r/GUI/GUI_ObjectList.cpp:668 src/slic3r/GUI/Plater.cpp:389 #: src/slic3r/GUI/Tab.cpp:1432 src/slic3r/GUI/Tab.cpp:1434 #: src/libslic3r/PrintConfig.cpp:259 src/libslic3r/PrintConfig.cpp:472 #: src/libslic3r/PrintConfig.cpp:496 src/libslic3r/PrintConfig.cpp:848 #: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:899 #: src/libslic3r/PrintConfig.cpp:1076 src/libslic3r/PrintConfig.cpp:1086 #: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1172 #: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1928 #: src/libslic3r/PrintConfig.cpp:1945 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:320 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:322 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:333 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:335 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:143 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28 #: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/ExtrusionEntity.cpp:309 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1298 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/libslic3r/Preset.cpp:1300 msgid "SLA print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 src/slic3r/GUI/Plater.cpp:696 #: src/libslic3r/Preset.cpp:1301 msgid "SLA material" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:62 src/libslic3r/Preset.cpp:1302 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 src/slic3r/GUI/Tab.cpp:1304 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:84 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:87 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:113 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:242 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:246 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:310 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:310 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:311 src/slic3r/GUI/ConfigWizard.cpp:605 #: src/slic3r/GUI/Tab.cpp:3565 src/slic3r/GUI/UnsavedChangesDialog.cpp:933 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:312 src/slic3r/GUI/ConfigWizard.cpp:606 #: src/slic3r/GUI/DoubleSlider.cpp:1859 src/slic3r/GUI/Plater.cpp:361 #: src/slic3r/GUI/Plater.cpp:504 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:452 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:454 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:456 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:458 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:463 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:506 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:594 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:596 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:597 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:669 src/slic3r/GUI/ConfigWizard.cpp:819 #: src/slic3r/GUI/ConfigWizard.cpp:880 src/slic3r/GUI/ConfigWizard.cpp:1017 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:698 msgid "" "Filaments marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:701 msgid "All installed printers are compatible with the selected filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:721 msgid "" "Only the following installed printers are compatible with the selected " "filament:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1107 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1107 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1109 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1111 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1136 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1136 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1144 src/slic3r/GUI/Preferences.cpp:94 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1148 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1154 src/slic3r/GUI/Preferences.cpp:129 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1158 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1161 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1166 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1173 src/slic3r/GUI/GUI_ObjectList.cpp:1825 #: src/slic3r/GUI/GUI_ObjectList.cpp:4567 src/slic3r/GUI/Plater.cpp:3116 #: src/slic3r/GUI/Plater.cpp:4001 src/slic3r/GUI/Plater.cpp:4032 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1176 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1180 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1190 msgid "Files association" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1192 src/slic3r/GUI/Preferences.cpp:112 msgid "Associate .3mf files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1193 src/slic3r/GUI/Preferences.cpp:119 msgid "Associate .stl files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1204 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1206 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1211 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1212 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1213 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1219 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1220 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1254 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1258 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1289 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1289 src/slic3r/GUI/Tab.cpp:2172 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1293 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1327 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1330 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1350 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1350 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1364 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1367 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1377 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1378 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1381 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1415 msgid "Nozzle and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1415 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1431 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1432 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1435 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1436 src/slic3r/GUI/ConfigWizard.cpp:1450 #: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:950 #: src/libslic3r/PrintConfig.cpp:994 src/libslic3r/PrintConfig.cpp:2294 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1445 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1446 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1449 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1909 src/slic3r/GUI/ConfigWizard.cpp:2582 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1909 src/slic3r/GUI/ConfigWizard.cpp:2584 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1963 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1968 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2274 src/slic3r/GUI/DoubleSlider.cpp:2245 #: src/slic3r/GUI/DoubleSlider.cpp:2265 src/slic3r/GUI/GUI.cpp:244 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2295 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2299 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2313 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2317 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2545 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2548 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2549 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2550 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2551 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:656 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2564 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2567 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2582 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2582 src/slic3r/GUI/ConfigWizard.cpp:2584 #: src/slic3r/GUI/GUI_ObjectList.cpp:4144 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2584 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2701 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2702 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2704 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2705 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:97 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1224 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1226 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1230 src/slic3r/GUI/DoubleSlider.cpp:1995 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1233 #, possible-c-format msgid "" "Jump to height %s\n" "Set ruler mode\n" "or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1236 #, possible-c-format msgid "" "Jump to height %s\n" "or Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1241 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1251 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1265 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1267 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1269 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1270 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1272 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1273 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1279 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1288 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1289 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1291 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1293 msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1295 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1302 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1304 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1307 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1310 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1313 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1318 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1320 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1321 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1417 src/slic3r/GUI/DoubleSlider.cpp:1451 #: src/slic3r/GUI/GUI_ObjectList.cpp:1864 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1418 src/slic3r/GUI/GUI_ObjectList.cpp:1865 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1427 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1427 src/slic3r/GUI/GUI_ObjectList.cpp:1832 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1428 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1430 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1452 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1460 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1461 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1797 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1808 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1812 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1815 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1833 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1834 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1835 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1841 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1842 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1843 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1844 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1854 src/slic3r/GUI/DoubleSlider.cpp:1995 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1859 msgid "Hide ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1863 msgid "Show object height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1863 msgid "Show object height on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1867 msgid "Show estimated print time" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1867 msgid "Show estimated print time on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1871 msgid "Ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1871 msgid "Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1876 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1962 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1963 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1978 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1979 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1994 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1994 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2239 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2240 src/slic3r/GUI/DoubleSlider.cpp:2255 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2242 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2243 src/slic3r/GUI/DoubleSlider.cpp:2263 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2256 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2259 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2261 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2262 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:512 #: src/slic3r/GUI/GUI_ObjectList.cpp:524 src/slic3r/GUI/GUI_ObjectList.cpp:1033 #: src/slic3r/GUI/GUI_ObjectList.cpp:4582 #: src/slic3r/GUI/GUI_ObjectList.cpp:4592 #: src/slic3r/GUI/GUI_ObjectList.cpp:4627 #: src/slic3r/GUI/ObjectDataViewModel.cpp:209 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266 #: src/slic3r/GUI/ObjectDataViewModel.cpp:291 #: src/slic3r/GUI/ObjectDataViewModel.cpp:499 src/libslic3r/PrintConfig.cpp:552 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:24 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:40 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:53 #: src/libslic3r/PrintConfig.cpp:418 src/libslic3r/PrintConfig.cpp:1089 #: src/libslic3r/PrintConfig.cpp:1718 src/libslic3r/PrintConfig.cpp:1883 #: src/libslic3r/PrintConfig.cpp:1950 src/libslic3r/PrintConfig.cpp:2157 #: src/libslic3r/PrintConfig.cpp:2203 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:137 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:183 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:193 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:197 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:200 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:211 src/slic3r/GUI/OptionsGroup.cpp:781 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:886 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:233 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:253 src/slic3r/GUI/Field.cpp:307 #: src/slic3r/GUI/Field.cpp:1520 src/slic3r/GUI/GUI_ObjectLayers.cpp:413 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:264 #, possible-c-format msgid "" "Input value is out of range\n" "Are you sure that %s is a correct value and that you want to continue?" msgstr "" #: src/slic3r/GUI/Field.cpp:266 src/slic3r/GUI/Field.cpp:326 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/Field.cpp:279 src/slic3r/GUI/Field.cpp:373 #: src/slic3r/GUI/Field.cpp:1532 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:323 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:381 msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:805 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:289 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 #: src/slic3r/GUI/Mouse3DController.cpp:551 #: src/slic3r/GUI/PrintHostDialogs.cpp:189 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:902 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:906 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:239 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1016 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1405 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1496 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2225 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2225 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2337 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2343 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2351 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2351 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2379 src/slic3r/GUI/GCodeViewer.cpp:2387 #: src/slic3r/GUI/GUI_Preview.cpp:214 src/slic3r/GUI/GUI_Preview.cpp:533 #: src/slic3r/GUI/GUI_Preview.cpp:942 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2379 src/slic3r/GUI/GCodeViewer.cpp:2387 #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2387 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2390 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2391 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2392 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2393 msgid "Fan Speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2394 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2395 src/slic3r/GUI/GUI_Preview.cpp:220 #: src/slic3r/GUI/GUI_Preview.cpp:326 src/slic3r/GUI/GUI_Preview.cpp:471 #: src/slic3r/GUI/GUI_Preview.cpp:532 src/slic3r/GUI/GUI_Preview.cpp:878 #: src/slic3r/GUI/GUI_Preview.cpp:942 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2396 src/slic3r/GUI/GUI_Preview.cpp:221 #: src/slic3r/GUI/GUI_Preview.cpp:530 src/slic3r/GUI/GUI_Preview.cpp:941 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2432 src/slic3r/GUI/GCodeViewer.cpp:2467 #: src/slic3r/GUI/GCodeViewer.cpp:2472 src/slic3r/GUI/GUI_ObjectList.cpp:312 #: src/slic3r/GUI/wxExtensions.cpp:519 src/libslic3r/PrintConfig.cpp:547 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2443 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2467 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2562 src/slic3r/GUI/GCodeViewer.cpp:2608 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2581 src/slic3r/GUI/GCodeViewer.cpp:2606 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2607 src/slic3r/GUI/GCodeViewer.cpp:2624 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2612 src/slic3r/GUI/GCodeViewer.cpp:2615 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2612 src/slic3r/GUI/GCodeViewer.cpp:2615 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2615 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2650 src/slic3r/GUI/GUI_Preview.cpp:1023 #: src/libslic3r/PrintConfig.cpp:2380 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2653 msgid "Movement" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2654 msgid "Extrusion" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2655 src/slic3r/GUI/Tab.cpp:1694 #: src/slic3r/GUI/Tab.cpp:2582 msgid "Retraction" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2672 src/slic3r/GUI/GCodeViewer.cpp:2675 #: src/slic3r/GUI/GUI_Preview.cpp:1024 msgid "Wipe" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2706 src/slic3r/GUI/GUI_Preview.cpp:248 #: src/slic3r/GUI/GUI_Preview.cpp:262 msgid "Options" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2709 src/slic3r/GUI/GUI_Preview.cpp:1025 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2710 src/slic3r/GUI/GUI_Preview.cpp:1026 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2711 src/slic3r/GUI/GUI_Preview.cpp:1027 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2712 src/slic3r/GUI/GUI_Preview.cpp:1028 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2713 src/slic3r/GUI/GUI_Preview.cpp:1029 msgid "Print pauses" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2714 src/slic3r/GUI/GUI_Preview.cpp:1030 msgid "Custom G-codes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2725 src/slic3r/GUI/GCodeViewer.cpp:2749 #: src/slic3r/GUI/Plater.cpp:697 src/libslic3r/PrintConfig.cpp:117 msgid "Printer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2727 src/slic3r/GUI/GCodeViewer.cpp:2754 #: src/slic3r/GUI/Plater.cpp:693 msgid "Print settings" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2730 src/slic3r/GUI/GCodeViewer.cpp:2760 #: src/slic3r/GUI/Plater.cpp:694 src/slic3r/GUI/Tab.cpp:1794 #: src/slic3r/GUI/Tab.cpp:1795 msgid "Filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2785 src/slic3r/GUI/GCodeViewer.cpp:2790 #: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1135 #: src/slic3r/GUI/Plater.cpp:1220 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2785 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2790 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2817 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2821 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:236 src/slic3r/GUI/GLCanvas3D.cpp:4610 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:238 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:240 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:242 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:244 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:246 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:248 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:250 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:252 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:254 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:256 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:259 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:265 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:268 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:279 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:285 src/libslic3r/PrintConfig.cpp:571 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:295 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:304 src/slic3r/GUI/GLCanvas3D.cpp:4050 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:566 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:634 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:635 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:636 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:637 msgid "Some objects are not visible." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:639 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:949 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1455 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1463 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1471 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1876 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2746 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2832 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3388 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3858 src/slic3r/GUI/GLCanvas3D.cpp:4571 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3859 src/slic3r/GUI/GLCanvas3D.cpp:4571 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3860 src/slic3r/GUI/GLCanvas3D.cpp:4572 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3860 src/slic3r/GUI/GLCanvas3D.cpp:4572 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3861 src/slic3r/GUI/GLCanvas3D.cpp:4573 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3909 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3909 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3930 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3930 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3950 src/slic3r/GUI/GLCanvas3D.cpp:4589 #: src/slic3r/GUI/KBShortcutsDialog.cpp:98 src/slic3r/GUI/Search.cpp:351 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3964 src/slic3r/GUI/GLCanvas3D.cpp:3972 #: src/slic3r/GUI/Search.cpp:358 msgid "Enter a search term" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4003 msgid "Arrange options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4033 msgid "Press %1%left mouse button to enter the exact value" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4035 msgid "Spacing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4042 msgid "Enable rotations (slow)" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4060 src/slic3r/GUI/GLCanvas3D.cpp:4481 #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 src/slic3r/GUI/Plater.cpp:1648 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4455 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4463 src/slic3r/GUI/GUI_ObjectList.cpp:1878 #: src/slic3r/GUI/Plater.cpp:3998 src/slic3r/GUI/Plater.cpp:4022 #: src/slic3r/GUI/Tab.cpp:3484 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4472 src/slic3r/GUI/KBShortcutsDialog.cpp:88 #: src/slic3r/GUI/Plater.cpp:5107 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4481 src/slic3r/GUI/KBShortcutsDialog.cpp:121 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4481 msgid "Click right mouse button to show arrangement options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4503 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4512 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4524 src/slic3r/GUI/Plater.cpp:3857 #: src/slic3r/GUI/Plater.cpp:3869 src/slic3r/GUI/Plater.cpp:4007 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4535 src/slic3r/GUI/Plater.cpp:4009 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4548 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4558 src/slic3r/GUI/GUI_ObjectList.cpp:1650 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4660 src/slic3r/GUI/KBShortcutsDialog.cpp:89 #: src/slic3r/GUI/MainFrame.cpp:1125 msgid "Undo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4660 src/slic3r/GUI/GLCanvas3D.cpp:4699 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4683 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4699 src/slic3r/GUI/KBShortcutsDialog.cpp:90 #: src/slic3r/GUI/MainFrame.cpp:1128 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4721 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6345 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6364 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151 src/libslic3r/PrintConfig.cpp:3690 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 msgid "in" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:185 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:186 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:187 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33 msgid "Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27 msgid "Brush size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28 msgid "Brush shape" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:373 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:368 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:378 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 #: src/slic3r/GUI/GUI_ObjectList.cpp:1595 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:129 msgid "Autoset by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:118 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:159 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:173 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:203 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233 msgid "Autoset custom supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235 msgid "Threshold:" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245 msgid "Block" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43 #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44 #: src/libslic3r/PrintConfig.cpp:3183 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 #: src/libslic3r/PrintConfig.cpp:3739 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/libslic3r/PrintConfig.cpp:3754 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:381 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:383 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46 msgid "Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 #: src/libslic3r/PrintConfig.cpp:3013 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897 msgid "SLA gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924 msgid "SLA gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 src/slic3r/GUI/GUI.cpp:256 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:557 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:581 #: src/slic3r/GUI/WipeTowerDialog.cpp:45 src/slic3r/GUI/WipeTowerDialog.cpp:366 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:39 msgid "Entering Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40 msgid "Entering Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:47 msgid "Leaving Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48 msgid "Leaving Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:371 msgid "Add supports" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:239 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:241 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:242 msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:382 msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " "(according to XDG Base Directory Specification) to \n" "%2%.\n" "\n" "This directory did not exist yet (maybe you run the new version for the " "first time).\n" "However, an old %1% configuration directory was detected in \n" "%3%.\n" "\n" "Consider moving the contents of the old directory to the new location in " "order to access your profiles, etc.\n" "Note that if you decide to downgrade %1% in future, it will use the old " "location again.\n" "\n" "What do you want to do now?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:390 #, possible-c-format msgid "%s - BREAKING CHANGE" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:392 msgid "Quit, I will move my data now" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:392 msgid "Start the application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:580 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:583 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:587 msgid "" "PrusaSlicer has encountered a localization error. Please report to " "PrusaSlicer team, what language was active and in which scenario this issue " "happened. Thank you.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:590 msgid "Critical error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:711 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:717 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:771 #, possible-c-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:773 src/slic3r/GUI/UnsavedChangesDialog.cpp:665 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:808 msgid "Loading configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:876 msgid "Preparing settings tabs" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1115 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1119 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" "Settings will be available in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1121 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1124 src/slic3r/GUI/PhysicalPrinterDialog.cpp:626 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1137 src/slic3r/GUI/GUI_App.cpp:1148 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1153 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1158 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1234 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1246 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1258 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1269 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1392 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1392 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1541 msgid "modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1590 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1594 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1594 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1595 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1595 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1596 msgid "Check for updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1596 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1599 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1605 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1610 src/slic3r/GUI/wxExtensions.cpp:685 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1610 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1612 src/slic3r/GUI/wxExtensions.cpp:687 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1612 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1613 src/slic3r/GUI/wxExtensions.cpp:688 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1613 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1618 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1618 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1621 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1624 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1624 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1640 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1640 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1669 msgid "Failed to activate configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1719 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1721 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1723 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1750 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1781 msgid "The preset(s) modifications are successfully saved" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1802 msgid "The uploads are still ongoing" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1802 msgid "Stop them and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1805 msgid "Ongoing uploads" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2019 src/slic3r/GUI/Tab.cpp:3242 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2020 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2021 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 #: src/slic3r/GUI/Plater.cpp:2359 src/slic3r/GUI/Tab.cpp:3244 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2038 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:73 src/slic3r/GUI/GUI_Init.cpp:76 msgid "PrusaSlicer GUI initialization failed" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:76 msgid "Fatal error, exception catched: %1%" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:161 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:165 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92 #: src/slic3r/GUI/GUI_ObjectList.cpp:667 src/libslic3r/PrintConfig.cpp:74 #: src/libslic3r/PrintConfig.cpp:189 src/libslic3r/PrintConfig.cpp:231 #: src/libslic3r/PrintConfig.cpp:240 src/libslic3r/PrintConfig.cpp:464 #: src/libslic3r/PrintConfig.cpp:530 src/libslic3r/PrintConfig.cpp:538 #: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1219 #: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:1650 #: src/libslic3r/PrintConfig.cpp:1835 src/libslic3r/PrintConfig.cpp:2302 #: src/libslic3r/PrintConfig.cpp:2361 src/libslic3r/PrintConfig.cpp:2370 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95 #: src/slic3r/GUI/GUI_ObjectList.cpp:670 src/slic3r/GUI/GUI_Preview.cpp:240 #: src/slic3r/GUI/Tab.cpp:1472 src/slic3r/GUI/Tab.cpp:1474 #: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:352 #: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:1715 #: src/libslic3r/PrintConfig.cpp:2093 src/libslic3r/PrintConfig.cpp:2099 #: src/libslic3r/PrintConfig.cpp:2107 src/libslic3r/PrintConfig.cpp:2119 #: src/libslic3r/PrintConfig.cpp:2129 src/libslic3r/PrintConfig.cpp:2137 #: src/libslic3r/PrintConfig.cpp:2152 src/libslic3r/PrintConfig.cpp:2173 #: src/libslic3r/PrintConfig.cpp:2185 src/libslic3r/PrintConfig.cpp:2201 #: src/libslic3r/PrintConfig.cpp:2210 src/libslic3r/PrintConfig.cpp:2219 #: src/libslic3r/PrintConfig.cpp:2230 src/libslic3r/PrintConfig.cpp:2244 #: src/libslic3r/PrintConfig.cpp:2252 src/libslic3r/PrintConfig.cpp:2253 #: src/libslic3r/PrintConfig.cpp:2262 src/libslic3r/PrintConfig.cpp:2270 #: src/libslic3r/PrintConfig.cpp:2284 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99 #: src/slic3r/GUI/GUI_ObjectList.cpp:674 src/libslic3r/PrintConfig.cpp:2480 #: src/libslic3r/PrintConfig.cpp:2488 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:45 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:51 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:52 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:53 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:54 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:669 #: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/Tab.cpp:1442 #: src/libslic3r/ExtrusionEntity.cpp:316 src/libslic3r/ExtrusionEntity.cpp:344 #: src/libslic3r/PrintConfig.cpp:1226 src/libslic3r/PrintConfig.cpp:1232 #: src/libslic3r/PrintConfig.cpp:1246 src/libslic3r/PrintConfig.cpp:1256 #: src/libslic3r/PrintConfig.cpp:1264 src/libslic3r/PrintConfig.cpp:1266 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:671 #: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/Tab.cpp:1498 #: src/libslic3r/PrintConfig.cpp:291 src/libslic3r/PrintConfig.cpp:518 #: src/libslic3r/PrintConfig.cpp:1012 src/libslic3r/PrintConfig.cpp:1192 #: src/libslic3r/PrintConfig.cpp:1265 src/libslic3r/PrintConfig.cpp:1640 #: src/libslic3r/PrintConfig.cpp:1916 src/libslic3r/PrintConfig.cpp:1968 #: src/libslic3r/PrintConfig.cpp:2346 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:672 #: src/slic3r/GUI/Tab.cpp:1534 src/slic3r/GUI/Tab.cpp:2112 #: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:1146 #: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:1937 #: src/libslic3r/PrintConfig.cpp:2165 src/libslic3r/PrintConfig.cpp:2192 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:673 #: src/libslic3r/PrintConfig.cpp:507 src/libslic3r/PrintConfig.cpp:616 #: src/libslic3r/PrintConfig.cpp:957 src/libslic3r/PrintConfig.cpp:1154 #: src/libslic3r/PrintConfig.cpp:1627 src/libslic3r/PrintConfig.cpp:1957 #: src/libslic3r/PrintConfig.cpp:2174 src/libslic3r/PrintConfig.cpp:2334 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:677 #: src/slic3r/GUI/Tab.cpp:1428 src/slic3r/GUI/Tab.cpp:1452 #: src/slic3r/GUI/Tab.cpp:1555 src/slic3r/GUI/Tab.cpp:1558 #: src/slic3r/GUI/Tab.cpp:1855 src/slic3r/GUI/Tab.cpp:2197 #: src/slic3r/GUI/Tab.cpp:4114 src/libslic3r/PrintConfig.cpp:92 #: src/libslic3r/PrintConfig.cpp:132 src/libslic3r/PrintConfig.cpp:279 #: src/libslic3r/PrintConfig.cpp:1097 src/libslic3r/PrintConfig.cpp:1181 #: src/libslic3r/PrintConfig.cpp:2504 src/libslic3r/PrintConfig.cpp:2676 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:679 #: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4048 #: src/slic3r/GUI/Tab.cpp:4049 src/libslic3r/PrintConfig.cpp:2842 #: src/libslic3r/PrintConfig.cpp:2849 src/libslic3r/PrintConfig.cpp:2858 #: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2877 #: src/libslic3r/PrintConfig.cpp:2887 src/libslic3r/PrintConfig.cpp:2924 #: src/libslic3r/PrintConfig.cpp:2931 src/libslic3r/PrintConfig.cpp:2942 #: src/libslic3r/PrintConfig.cpp:2952 src/libslic3r/PrintConfig.cpp:2961 #: src/libslic3r/PrintConfig.cpp:2974 src/libslic3r/PrintConfig.cpp:2984 #: src/libslic3r/PrintConfig.cpp:2993 src/libslic3r/PrintConfig.cpp:3003 #: src/libslic3r/PrintConfig.cpp:3014 src/libslic3r/PrintConfig.cpp:3022 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:680 #: src/slic3r/GUI/Plater.cpp:500 src/slic3r/GUI/Tab.cpp:4089 #: src/slic3r/GUI/Tab.cpp:4090 src/slic3r/GUI/Tab.cpp:4161 #: src/libslic3r/PrintConfig.cpp:3030 src/libslic3r/PrintConfig.cpp:3037 #: src/libslic3r/PrintConfig.cpp:3051 src/libslic3r/PrintConfig.cpp:3062 #: src/libslic3r/PrintConfig.cpp:3072 src/libslic3r/PrintConfig.cpp:3094 #: src/libslic3r/PrintConfig.cpp:3105 src/libslic3r/PrintConfig.cpp:3112 #: src/libslic3r/PrintConfig.cpp:3119 src/libslic3r/PrintConfig.cpp:3130 #: src/libslic3r/PrintConfig.cpp:3139 src/libslic3r/PrintConfig.cpp:3148 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4107 #: src/slic3r/GUI/Tab.cpp:4108 src/libslic3r/SLA/Hollowing.cpp:45 #: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66 #: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3158 #: src/libslic3r/PrintConfig.cpp:3165 src/libslic3r/PrintConfig.cpp:3175 #: src/libslic3r/PrintConfig.cpp:3184 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:300 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:457 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:402 #, possible-c-format msgid "Auto-repaired (%d errors):" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:409 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:410 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:411 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:412 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:413 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:414 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:422 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:459 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:461 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:465 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:467 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:590 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:605 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:605 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1247 #: src/slic3r/GUI/GUI_ObjectList.cpp:4372 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1262 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1262 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1338 #: src/slic3r/GUI/GUI_ObjectList.cpp:1693 #: src/slic3r/GUI/GUI_ObjectList.cpp:1699 #: src/slic3r/GUI/GUI_ObjectList.cpp:2081 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1428 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1477 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1478 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1479 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1549 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1550 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1551 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1590 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1595 #: src/slic3r/GUI/GUI_ObjectList.cpp:1627 #: src/slic3r/GUI/GUI_ObjectList.cpp:1631 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1595 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1595 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1663 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1672 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1750 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1760 #: src/slic3r/GUI/GUI_ObjectList.cpp:1772 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1772 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1782 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1797 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1808 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1818 src/slic3r/GUI/Plater.cpp:4035 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1825 #: src/slic3r/GUI/GUI_ObjectList.cpp:4567 src/slic3r/GUI/Plater.cpp:4001 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1832 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1864 src/libslic3r/PrintConfig.cpp:391 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1884 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1884 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1913 src/slic3r/GUI/Plater.cpp:5224 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1915 src/slic3r/GUI/Plater.cpp:5224 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1944 #: src/slic3r/GUI/GUI_ObjectList.cpp:1952 #: src/slic3r/GUI/GUI_ObjectList.cpp:2630 src/libslic3r/PrintConfig.cpp:3730 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1944 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1952 msgid "Merge objects to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2026 #: src/slic3r/GUI/GUI_ObjectList.cpp:2283 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2111 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2150 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2225 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2254 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2380 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2402 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2418 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2450 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2454 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2469 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2473 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2497 src/slic3r/GUI/Plater.cpp:2865 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2501 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2637 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2721 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2753 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2907 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2919 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2932 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2936 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2941 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2947 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2953 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2960 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2960 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3144 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3332 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3408 #: src/slic3r/GUI/GUI_ObjectList.cpp:3436 #: src/slic3r/GUI/GUI_ObjectList.cpp:3456 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3502 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3506 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3511 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3570 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3865 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3873 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4008 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4009 #: src/slic3r/GUI/GUI_ObjectList.cpp:4142 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4009 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4011 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4012 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4013 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4016 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4021 #: src/slic3r/GUI/GUI_ObjectList.cpp:4096 src/slic3r/GUI/Plater.cpp:143 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4137 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4142 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4142 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4142 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4144 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4149 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4394 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4394 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4410 #: src/slic3r/GUI/GUI_ObjectList.cpp:4537 #: src/slic3r/GUI/SavePresetDialog.cpp:101 #: src/slic3r/GUI/SavePresetDialog.cpp:109 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4411 #: src/slic3r/GUI/GUI_ObjectList.cpp:4538 #: src/slic3r/GUI/SavePresetDialog.cpp:102 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4586 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4587 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4612 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4709 src/slic3r/GUI/Selection.cpp:1485 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4709 src/slic3r/GUI/Selection.cpp:1485 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:537 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:505 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506 #: src/slic3r/GUI/Mouse3DController.cpp:486 #: src/slic3r/GUI/Mouse3DController.cpp:507 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:423 msgid "Inches" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:561 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:625 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:828 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:893 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:925 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:928 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:62 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:98 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:104 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:157 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:212 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:215 src/libslic3r/PrintConfig.cpp:560 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:216 src/libslic3r/PrintConfig.cpp:2466 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/Tab.cpp:1840 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:219 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:224 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:227 src/slic3r/GUI/GUI_Preview.cpp:245 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/ExtrusionEntity.cpp:310 #: src/libslic3r/ExtrusionEntity.cpp:332 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/ExtrusionEntity.cpp:311 #: src/libslic3r/ExtrusionEntity.cpp:334 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/ExtrusionEntity.cpp:312 #: src/libslic3r/ExtrusionEntity.cpp:336 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/ExtrusionEntity.cpp:313 #: src/libslic3r/ExtrusionEntity.cpp:338 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/ExtrusionEntity.cpp:314 #: src/libslic3r/ExtrusionEntity.cpp:340 src/libslic3r/PrintConfig.cpp:1956 #: src/libslic3r/PrintConfig.cpp:1967 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:235 src/libslic3r/ExtrusionEntity.cpp:315 #: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2333 #: src/libslic3r/PrintConfig.cpp:2345 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/ExtrusionEntity.cpp:317 #: src/libslic3r/ExtrusionEntity.cpp:346 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:318 #: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:1011 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:239 src/slic3r/GUI/Tab.cpp:1462 #: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/ExtrusionEntity.cpp:350 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:321 #: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:2218 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:242 src/slic3r/GUI/Tab.cpp:1545 #: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/ExtrusionEntity.cpp:356 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1031 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1032 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1033 msgid "Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:804 src/slic3r/GUI/Search.cpp:389 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:805 src/slic3r/GUI/Search.cpp:383 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:385 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:145 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:175 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:181 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/Job.cpp:75 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35 msgid "Choose SLA archive:" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39 msgid "Import file" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46 msgid "Import model and profile" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47 msgid "Import profile only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48 msgid "Import model only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59 msgid "Accurate" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60 msgid "Balanced" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61 msgid "Quick" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2357 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2358 #: src/slic3r/GUI/Tab.cpp:3243 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:17 src/slic3r/GUI/MainFrame.cpp:894 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:69 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:70 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:71 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:72 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:73 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:75 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:76 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:77 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:79 src/slic3r/GUI/Plater.cpp:770 #: src/slic3r/GUI/Plater.cpp:6054 src/libslic3r/PrintConfig.cpp:3635 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:80 src/slic3r/GUI/Plater.cpp:6055 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:81 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:82 src/slic3r/GUI/Plater.cpp:758 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:83 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:85 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:86 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:91 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:92 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:94 #: src/slic3r/GUI/KBShortcutsDialog.cpp:96 #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:100 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:101 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:102 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:103 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:105 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 #: src/slic3r/GUI/PrintHostDialogs.cpp:165 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/MainFrame.cpp:65 #: src/slic3r/GUI/MainFrame.cpp:1191 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:110 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 src/slic3r/GUI/Preferences.cpp:13 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 #: src/slic3r/GUI/KBShortcutsDialog.cpp:191 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:124 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:125 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 #: src/slic3r/GUI/KBShortcutsDialog.cpp:244 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 #: src/slic3r/GUI/KBShortcutsDialog.cpp:228 #: src/slic3r/GUI/KBShortcutsDialog.cpp:241 #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:131 #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:131 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 src/slic3r/GUI/MainFrame.cpp:331 #: src/slic3r/GUI/MainFrame.cpp:343 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Gizmo move: Press to snap by 1mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Gizmo scale: Press to snap by 5%" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Gizmo scale: Scale selection to fit print volume" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Gizmo scale: Press to activate one direction scaling" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:175 msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 msgid "" "The following shortcuts are applicable when the specified gizmo is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:183 src/slic3r/GUI/MainFrame.cpp:1244 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 src/slic3r/GUI/MainFrame.cpp:1142 #: src/slic3r/GUI/MainFrame.cpp:1146 src/slic3r/GUI/MainFrame.cpp:1249 #: src/slic3r/GUI/MainFrame.cpp:1253 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 #: src/slic3r/GUI/KBShortcutsDialog.cpp:200 msgid "Vertical slider - Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 #: src/slic3r/GUI/KBShortcutsDialog.cpp:201 msgid "Vertical slider - Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 #: src/slic3r/GUI/KBShortcutsDialog.cpp:202 msgid "Horizontal slider - Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 #: src/slic3r/GUI/KBShortcutsDialog.cpp:203 msgid "Horizontal slider - Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:204 msgid "On/Off one layer mode of the vertical slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 msgid "Show/Hide Legend and Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 msgid "Upper layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 msgid "Lower layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:210 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:211 msgid "Show/Hide Legend & Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 src/slic3r/GUI/Plater.cpp:4200 #: src/slic3r/GUI/Tab.cpp:2602 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 msgid "Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 msgid "Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 msgid "Set upper thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Set lower thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 #: src/slic3r/GUI/KBShortcutsDialog.cpp:231 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:228 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 #: src/slic3r/GUI/KBShortcutsDialog.cpp:250 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "Vertical Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "" "The following shortcuts are applicable in G-code preview when the vertical " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:241 msgid "Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 msgid "Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Set left thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:244 msgid "Set right thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Move active slider thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Move active slider thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:253 msgid "Horizontal Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:253 msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:276 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:65 src/slic3r/GUI/MainFrame.cpp:79 #: src/slic3r/GUI/MainFrame.cpp:1191 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:68 src/slic3r/GUI/MainFrame.cpp:81 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:68 src/slic3r/GUI/MainFrame.cpp:1091 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:79 src/slic3r/GUI/MainFrame.cpp:1260 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:81 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:153 msgid "" "Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/" "releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:510 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:866 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:866 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:868 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:868 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:874 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:875 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:881 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:881 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:883 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:883 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:885 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:885 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:888 src/slic3r/GUI/MainFrame.cpp:891 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:888 src/slic3r/GUI/MainFrame.cpp:891 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:894 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:908 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:908 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:912 src/libslic3r/PrintConfig.cpp:2360 #: src/libslic3r/PrintConfig.cpp:2369 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:912 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:915 src/libslic3r/PrintConfig.cpp:230 #: src/libslic3r/PrintConfig.cpp:239 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:915 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:917 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:917 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:919 src/libslic3r/PrintConfig.cpp:1845 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:919 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:921 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:921 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:923 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:923 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:936 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:936 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:939 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:939 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:944 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:953 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:953 src/slic3r/GUI/MainFrame.cpp:1343 #: src/slic3r/GUI/PrintHostDialogs.cpp:263 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:978 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:978 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:984 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:984 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:992 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:992 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:996 msgid "Import STL (imperial units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:996 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1000 msgid "Import SL1 archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1000 msgid "Load an SL1 archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1005 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1005 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1008 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1008 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1012 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1012 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1015 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1018 src/slic3r/GUI/MainFrame.cpp:1305 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1018 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1022 src/slic3r/GUI/MainFrame.cpp:1306 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1022 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1026 msgid "Export G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1026 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1030 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1030 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1033 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1033 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1036 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1036 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1040 src/slic3r/GUI/MainFrame.cpp:1257 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1040 src/slic3r/GUI/MainFrame.cpp:1257 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1044 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1044 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1047 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1047 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1050 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1050 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1053 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1055 msgid "Ejec&t SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1055 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1063 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1063 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1069 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1069 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1075 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1075 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1083 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1083 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1087 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1087 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1091 msgid "&G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1094 src/slic3r/GUI/MainFrame.cpp:1264 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1094 src/slic3r/GUI/MainFrame.cpp:1264 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1109 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1110 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1112 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1113 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1116 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1117 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1119 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1120 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1124 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1127 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1132 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1133 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1135 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1136 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1141 src/slic3r/GUI/MainFrame.cpp:1145 #: src/slic3r/GUI/MainFrame.cpp:1248 src/slic3r/GUI/MainFrame.cpp:1252 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1151 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1152 msgid "Search in settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1160 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1160 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1165 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1165 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1168 src/slic3r/GUI/MainFrame.cpp:1308 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1168 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1172 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1172 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1178 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1178 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1181 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1181 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1187 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1187 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1201 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1201 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1204 msgid "&Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1204 src/slic3r/GUI/Plater.cpp:2247 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1216 src/slic3r/GUI/MainFrame.cpp:1279 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1217 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1218 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1219 src/slic3r/GUI/MainFrame.cpp:1280 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1222 src/slic3r/GUI/MainFrame.cpp:1283 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1244 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1260 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1305 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1306 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1308 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1331 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1342 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1348 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1348 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1349 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1384 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1384 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1384 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1396 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1405 src/slic3r/GUI/Plater.cpp:3009 #: src/slic3r/GUI/Plater.cpp:5581 src/slic3r/GUI/Tab.cpp:1575 #: src/slic3r/GUI/Tab.cpp:4115 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1407 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1430 msgid "%1% was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1432 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1447 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1457 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1469 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1469 src/libslic3r/PrintConfig.cpp:3735 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1483 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1502 src/slic3r/GUI/MainFrame.cpp:1564 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1538 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1585 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:461 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:472 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:477 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:480 #: src/slic3r/GUI/Mouse3DController.cpp:501 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:492 #: src/slic3r/GUI/Mouse3DController.cpp:501 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:498 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:513 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:516 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:70 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:71 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:471 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:474 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:474 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:476 msgid "New version is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:476 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:479 msgid "" "You have just added a G-code for color change, but its value is empty.\n" "To export the G-code correctly, check the \"Color Change G-code\" in " "\"Printer Settings > Custom G-code\"" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:490 #: src/slic3r/GUI/NotificationManager.cpp:500 msgid "More" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:864 #: src/slic3r/GUI/NotificationManager.cpp:1141 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:908 msgid "Open Folder." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:946 msgid "Eject drive" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1060 #: src/slic3r/GUI/NotificationManager.cpp:1076 #: src/slic3r/GUI/NotificationManager.cpp:1087 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1065 #: src/slic3r/GUI/NotificationManager.cpp:1080 #: src/slic3r/GUI/NotificationManager.cpp:1095 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1144 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1186 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:58 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:62 #: src/slic3r/GUI/ObjectDataViewModel.cpp:225 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3962 #: src/slic3r/GUI/Tab.cpp:4044 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:259 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:262 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw_renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:267 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:275 #, possible-c-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:276 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:335 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:335 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:51 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:81 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:155 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:161 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:172 msgid "Descriptive name for the printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 src/slic3r/GUI/Tab.cpp:2064 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:260 msgid "Connection to printers connected via the print host failed." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:302 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:307 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:319 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:329 msgid "Refresh Printers" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:356 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:366 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:395 #: src/libslic3r/PrintConfig.cpp:124 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:396 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:397 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:543 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:547 msgid "You should change the name of your printer device." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:555 msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:556 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:579 msgid "" "Following printer preset(s) is duplicated:%1%The above preset for printer " "\"%2%\" will be used just once." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:625 msgid "It's not possible to delete the last related preset for the printer." msgstr "" #: src/slic3r/GUI/Plater.cpp:163 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:164 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:165 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:168 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:218 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1151 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1163 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1170 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:240 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:241 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:243 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:360 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:2128 #: src/libslic3r/PrintConfig.cpp:2923 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:489 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:364 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:396 src/slic3r/GUI/Tab.cpp:1469 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:398 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:406 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:503 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:505 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:506 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:695 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:756 src/slic3r/GUI/Plater.cpp:6055 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:771 src/slic3r/GUI/Plater.cpp:3009 #: src/slic3r/GUI/Plater.cpp:5584 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:926 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1071 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1076 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1079 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:1089 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1110 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1113 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1113 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1151 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1206 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1206 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1163 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1189 msgid "Filament at extruder %1%" msgstr "" #: src/slic3r/GUI/Plater.cpp:1195 msgid "(including spool)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1204 src/libslic3r/PrintConfig.cpp:822 #: src/libslic3r/PrintConfig.cpp:2738 src/libslic3r/PrintConfig.cpp:2739 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1222 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1232 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1403 src/slic3r/GUI/Plater.cpp:4923 #, possible-c-format msgid "%s - Drop project file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1410 src/slic3r/GUI/Plater.cpp:4930 msgid "Open as project" msgstr "" #: src/slic3r/GUI/Plater.cpp:1411 src/slic3r/GUI/Plater.cpp:4931 msgid "Import geometry only" msgstr "" #: src/slic3r/GUI/Plater.cpp:1412 src/slic3r/GUI/Plater.cpp:4932 msgid "Import config only" msgstr "" #: src/slic3r/GUI/Plater.cpp:1415 src/slic3r/GUI/Plater.cpp:4935 msgid "Select an action to apply to the file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1416 src/slic3r/GUI/Plater.cpp:4936 msgid "Action" msgstr "" #: src/slic3r/GUI/Plater.cpp:1424 src/slic3r/GUI/Plater.cpp:4944 msgid "Don't show again" msgstr "" #: src/slic3r/GUI/Plater.cpp:1469 src/slic3r/GUI/Plater.cpp:4981 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:1470 src/slic3r/GUI/Plater.cpp:4982 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1524 src/slic3r/GUI/Plater.cpp:4796 #: src/slic3r/GUI/Plater.cpp:5036 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:1546 src/slic3r/GUI/Plater.cpp:5058 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:1551 src/slic3r/GUI/Plater.cpp:5063 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:1654 msgid "Fill bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:1660 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:1666 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:2129 #, possible-c-format msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2134 #, possible-c-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2153 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2246 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2319 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:2329 msgid "Loading file" msgstr "" #: src/slic3r/GUI/Plater.cpp:2415 #, possible-c-format msgid "" "Some object(s) in file %s looks like saved in inches.\n" "Should I consider them as a saved in inches and convert them?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2417 msgid "The object appears to be saved in inches" msgstr "" #: src/slic3r/GUI/Plater.cpp:2425 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2428 src/slic3r/GUI/Plater.cpp:2481 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2435 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2436 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2458 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2478 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2494 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:2596 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2597 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2659 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2666 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2672 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2678 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2774 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2785 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2857 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2868 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2993 src/slic3r/GUI/Plater.cpp:3723 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:3003 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:3041 src/slic3r/GUI/PrintHostDialogs.cpp:264 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:3060 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3177 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3212 msgid "It is not allowed to change the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3212 msgid "Do you want to retry" msgstr "" #: src/slic3r/GUI/Plater.cpp:3230 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3323 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3328 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3347 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3374 msgid "" "ERROR: Please close all manipulators available from the left toolbar before " "fixing the mesh." msgstr "" #: src/slic3r/GUI/Plater.cpp:3380 msgid "Fix through NetFabb" msgstr "" #: src/slic3r/GUI/Plater.cpp:3397 msgid "Custom supports and seams were removed after repairing the mesh." msgstr "" #: src/slic3r/GUI/Plater.cpp:3680 msgid "There are active warnings concerning sliced models:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3691 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:3731 src/slic3r/GUI/PrintHostDialogs.cpp:265 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:3998 src/slic3r/GUI/Plater.cpp:4022 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4007 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4009 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4011 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4011 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4013 msgid "Fill bed with instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4013 msgid "Fill the remaining area of bed with instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4032 msgid "Reload the selected object from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:4035 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:4065 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4065 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4067 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4067 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4069 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4069 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4072 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:4072 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4084 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4084 src/slic3r/GUI/Plater.cpp:4104 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4086 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4086 src/slic3r/GUI/Plater.cpp:4122 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4089 src/slic3r/GUI/Plater.cpp:4104 #: src/slic3r/GUI/Plater.cpp:4122 src/libslic3r/PrintConfig.cpp:3759 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:4089 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4111 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:4112 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:4192 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4564 msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" #: src/slic3r/GUI/Plater.cpp:4768 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:4800 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4868 msgid "The selected file" msgstr "" #: src/slic3r/GUI/Plater.cpp:4868 msgid "does not contain valid gcode." msgstr "" #: src/slic3r/GUI/Plater.cpp:4869 msgid "Error while loading .gcode file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5107 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5115 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5123 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5157 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5188 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5189 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5193 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:5259 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:5316 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5316 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5463 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5480 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5483 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5512 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5517 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:6054 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:6149 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:56 src/slic3r/GUI/Tab.cpp:2098 #: src/slic3r/GUI/Tab.cpp:2285 src/slic3r/GUI/Tab.cpp:2393 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1080 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:69 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:71 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:77 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:79 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:85 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:87 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:96 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:102 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:104 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:114 msgid "If enabled, sets PrusaSlicer as default application to open .3mf files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:121 msgid "If enabled, sets PrusaSlicer as default application to open .stl files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:131 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:136 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:138 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:144 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:146 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:152 msgid "Show drop project dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:154 msgid "" "When checked, whenever dragging and dropping a project file on the " "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" #: src/slic3r/GUI/Preferences.cpp:161 src/slic3r/GUI/Preferences.cpp:165 msgid "Allow just a single PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/Preferences.cpp:163 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:167 msgid "" "If this is enabled, when starting PrusaSlicer and another instance of the " "same PrusaSlicer is already running, that instance will be reactivated " "instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:173 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:671 msgid "Ask for unsaved changes when closing application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:175 msgid "When closing the application, always ask for unsaved changes" msgstr "" #: src/slic3r/GUI/Preferences.cpp:180 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:672 msgid "Ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:182 msgid "Always ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:190 msgid "Associate .gcode files to PrusaSlicer G-code Viewer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:192 msgid "" "If enabled, sets PrusaSlicer G-code Viewer as default application to open ." "gcode files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:201 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:203 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:211 src/slic3r/GUI/Preferences.cpp:213 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:220 msgid "Enable support for legacy 3DConnexion devices" msgstr "" #: src/slic3r/GUI/Preferences.cpp:222 msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" #: src/slic3r/GUI/Preferences.cpp:232 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:237 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:239 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:244 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:246 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:251 msgid "Reverse direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:253 msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:261 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:276 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:278 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer. If disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:285 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:287 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:292 msgid "Suppress to open hyperlink in browser" msgstr "" #: src/slic3r/GUI/Preferences.cpp:294 msgid "" "If enabled, the descriptions of configuration parameters in settings tabs " "wouldn't work as hyperlinks. If disabled, the descriptions of configuration " "parameters in settings tabs will work as hyperlinks." msgstr "" #: src/slic3r/GUI/Preferences.cpp:300 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:302 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:320 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:325 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:327 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:352 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preferences.cpp:427 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:442 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:473 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:474 msgid "New layout, access via settings button in the top menu" msgstr "" #: src/slic3r/GUI/Preferences.cpp:475 msgid "Settings in non-modal window" msgstr "" #: src/slic3r/GUI/Preferences.cpp:484 msgid "Layout Options" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:197 #: src/slic3r/GUI/PresetComboBoxes.cpp:235 #: src/slic3r/GUI/PresetComboBoxes.cpp:761 #: src/slic3r/GUI/PresetComboBoxes.cpp:811 #: src/slic3r/GUI/PresetComboBoxes.cpp:925 #: src/slic3r/GUI/PresetComboBoxes.cpp:969 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:239 #: src/slic3r/GUI/PresetComboBoxes.cpp:815 #: src/slic3r/GUI/PresetComboBoxes.cpp:973 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:250 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:285 msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:287 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:624 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:680 #: src/slic3r/GUI/PresetComboBoxes.cpp:710 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:685 #: src/slic3r/GUI/PresetComboBoxes.cpp:715 src/slic3r/GUI/Tab.cpp:2990 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:699 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:703 src/slic3r/GUI/Tab.cpp:2990 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:706 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:826 #: src/slic3r/GUI/PresetComboBoxes.cpp:987 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:850 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:852 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:854 #: src/slic3r/GUI/PresetComboBoxes.cpp:1011 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:32 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:39 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:49 msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:51 msgid "During the other layers, fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:51 msgid "Fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:53 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:55 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:58 msgid "During the other layers, fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:58 msgid "Fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:159 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:168 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:177 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:195 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:206 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:216 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:223 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:226 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:227 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:228 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:232 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:250 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:266 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:273 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:277 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:306 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:319 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:322 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:325 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:338 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:341 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:344 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:37 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:45 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:58 msgid "Group" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:176 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:177 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:178 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:179 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:180 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:181 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:184 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:186 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:228 #: src/slic3r/GUI/PrintHostDialogs.cpp:261 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:262 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:266 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:304 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83 #: src/libslic3r/PrintConfig.cpp:706 src/libslic3r/PrintConfig.cpp:750 #: src/libslic3r/PrintConfig.cpp:765 src/libslic3r/PrintConfig.cpp:2636 #: src/libslic3r/PrintConfig.cpp:2645 src/libslic3r/PrintConfig.cpp:2755 #: src/libslic3r/PrintConfig.cpp:2763 src/libslic3r/PrintConfig.cpp:2771 #: src/libslic3r/PrintConfig.cpp:2778 src/libslic3r/PrintConfig.cpp:2786 #: src/libslic3r/PrintConfig.cpp:2794 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:663 #: src/libslic3r/PrintConfig.cpp:1458 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:57 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:110 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:116 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:122 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:127 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:134 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:136 msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " "printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:137 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:142 msgid "The name cannot be empty." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:147 msgid "The name cannot start with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:152 msgid "The name cannot end with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:186 #: src/slic3r/GUI/SavePresetDialog.cpp:192 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:215 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:273 msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:306 msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:309 msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:310 msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:311 msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2421 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2415 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:172 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:213 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:245 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:264 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:282 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:301 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:402 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:428 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:960 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/Selection.cpp:1487 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:1487 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:82 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:158 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:109 src/libslic3r/PrintConfig.cpp:321 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:110 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:115 src/libslic3r/PrintConfig.cpp:336 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:116 msgid "Select the print profiles this profile is compatible with." msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:211 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:212 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:216 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:220 msgid "Search in settings [%1%]" msgstr "" #: src/slic3r/GUI/Tab.cpp:1237 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1250 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1251 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1254 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1257 msgid "" "This action is not revertable.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1259 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1285 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1287 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1289 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1293 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1297 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1298 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1299 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1303 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1309 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1317 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1320 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1334 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1338 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1346 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1347 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1385 src/slic3r/GUI/Tab.cpp:4042 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1391 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1403 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1404 src/libslic3r/PrintConfig.cpp:1980 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1409 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1420 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1448 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1460 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1480 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1484 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1499 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1512 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1515 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1518 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1525 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1533 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1541 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1559 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1569 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1572 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1581 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1584 src/slic3r/GUI/Tab.cpp:4118 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1585 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1587 msgid "Extruder clearance" msgstr "" #: src/slic3r/GUI/Tab.cpp:1592 src/slic3r/GUI/Tab.cpp:4119 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1599 src/libslic3r/PrintConfig.cpp:1662 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1605 src/slic3r/GUI/Tab.cpp:1606 #: src/slic3r/GUI/Tab.cpp:1927 src/slic3r/GUI/Tab.cpp:1928 #: src/slic3r/GUI/Tab.cpp:2266 src/slic3r/GUI/Tab.cpp:2267 #: src/slic3r/GUI/Tab.cpp:2342 src/slic3r/GUI/Tab.cpp:2343 #: src/slic3r/GUI/Tab.cpp:3985 src/slic3r/GUI/Tab.cpp:3986 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1612 src/slic3r/GUI/Tab.cpp:1935 #: src/slic3r/GUI/Tab.cpp:2273 src/slic3r/GUI/Tab.cpp:2349 #: src/slic3r/GUI/Tab.cpp:3993 src/slic3r/GUI/Tab.cpp:4124 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1613 src/slic3r/GUI/Tab.cpp:1936 #: src/slic3r/GUI/Tab.cpp:2274 src/slic3r/GUI/Tab.cpp:2350 #: src/slic3r/GUI/Tab.cpp:3994 src/slic3r/GUI/Tab.cpp:4125 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1693 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1815 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1816 msgid "Nozzle" msgstr "" #: src/slic3r/GUI/Tab.cpp:1821 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1826 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1828 src/libslic3r/PrintConfig.cpp:1565 #: src/libslic3r/PrintConfig.cpp:2428 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1839 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1850 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1856 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1863 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1873 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1876 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1889 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1912 src/slic3r/GUI/Tab.cpp:2205 #: src/libslic3r/PrintConfig.cpp:2063 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1913 src/slic3r/GUI/Tab.cpp:2206 #: src/libslic3r/PrintConfig.cpp:2013 src/libslic3r/PrintConfig.cpp:2028 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1920 src/slic3r/GUI/Tab.cpp:2213 #: src/libslic3r/PrintConfig.cpp:441 src/libslic3r/PrintConfig.cpp:451 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1970 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2066 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"Add physical " "printer\" item in the Printer combo box. The Physical Printer profile editor " "opens also when clicking on the \"cog\" icon in the Printer settings tab. " "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2099 src/slic3r/GUI/Tab.cpp:2286 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2108 src/slic3r/GUI/UnsavedChangesDialog.cpp:1080 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2113 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2141 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2144 src/slic3r/GUI/Tab.cpp:2552 #: src/libslic3r/PrintConfig.cpp:1534 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2220 src/libslic3r/PrintConfig.cpp:209 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2227 src/libslic3r/PrintConfig.cpp:1273 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2234 src/libslic3r/PrintConfig.cpp:2321 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2241 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2248 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2254 src/libslic3r/PrintConfig.cpp:2054 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2260 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2293 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2308 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2309 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2315 src/slic3r/GUI/Tab.cpp:3969 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2332 src/slic3r/GUI/Tab.cpp:3965 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2391 src/slic3r/GUI/Tab.cpp:2485 #: src/libslic3r/PrintConfig.cpp:1302 src/libslic3r/PrintConfig.cpp:1337 #: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1371 #: src/libslic3r/PrintConfig.cpp:1387 src/libslic3r/PrintConfig.cpp:1397 #: src/libslic3r/PrintConfig.cpp:1407 src/libslic3r/PrintConfig.cpp:1417 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2414 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2420 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2429 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2434 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2441 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2446 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2510 src/slic3r/GUI/Tab.cpp:2518 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2519 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2550 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2574 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2579 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2585 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2598 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2605 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2783 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2785 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3376 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3439 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3439 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3448 msgid "It's a last preset for this physical printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:3453 msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3465 msgid "" "The physical printer(s) below is based on the preset, you are going to " "delete." msgstr "" #: src/slic3r/GUI/Tab.cpp:3469 msgid "" "Note, that selected preset will be deleted from this/those printer(s) too." msgstr "" #: src/slic3r/GUI/Tab.cpp:3473 msgid "" "The physical printer(s) below is based only on the preset, you are going to " "delete." msgstr "" #: src/slic3r/GUI/Tab.cpp:3477 msgid "" "Note, that this/those printer(s) will be deleted after deleting of the " "selected preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3481 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3486 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3567 src/slic3r/GUI/Tab.cpp:3639 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3703 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:3706 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:3710 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:3732 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3734 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3736 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3738 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3743 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3745 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3748 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3750 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3760 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3762 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3765 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3768 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3770 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3776 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3777 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3783 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3784 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3928 src/slic3r/GUI/Tab.cpp:3930 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4052 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4057 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4080 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4085 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4159 msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:4161 src/libslic3r/PrintConfig.cpp:3002 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4161 src/libslic3r/PrintConfig.cpp:3104 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/Tab.hpp:370 src/slic3r/GUI/Tab.hpp:492 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:401 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:442 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:476 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:149 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:158 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:857 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:537 msgid "PrusaSlicer is closing: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:554 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:620 msgid "Old Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:621 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:652 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:653 msgid "Discard" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:654 msgid "Save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:674 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:676 msgid "" "You will not be asked about the unsaved changes the next time you close " "PrusaSlicer." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:677 msgid "" "You will not be asked about the unsaved changes the next time you switch a " "preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:678 msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:680 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:747 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:749 msgid "All settings changes will be discarded." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:752 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:752 msgid "Transfer the selected settings to the newly selected preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:756 msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:757 msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1019 msgid "The following presets were modified:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1024 msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1028 msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1029 msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1075 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1197 msgid "Old value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1198 msgid "New value" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125 #: src/slic3r/GUI/UpdateDialogs.cpp:183 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:249 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:287 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:309 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:15 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:41 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:83 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:85 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:89 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:91 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:142 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:254 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:255 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:263 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:264 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:276 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:285 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:286 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:365 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:627 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:628 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:145 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:148 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed:" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:83 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:89 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:91 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:185 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:191 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:727 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:731 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:734 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:151 msgid "Open G-code file:" msgstr "" #: src/libslic3r/GCode.cpp:518 msgid "There is an object with no extrusions on the first layer." msgstr "" #: src/libslic3r/GCode.cpp:536 msgid "Empty layers detected, the output would not be printable." msgstr "" #: src/libslic3r/GCode.cpp:537 msgid "Print z" msgstr "" #: src/libslic3r/GCode.cpp:538 msgid "" "This is usually caused by negligibly small extrusions or by a faulty model. " "Try to repair the model or change its orientation on the bed." msgstr "" #: src/libslic3r/GCode.cpp:1261 msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:360 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1668 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:958 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Preset.cpp:1299 msgid "filament" msgstr "" #: src/libslic3r/Print.cpp:1251 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1254 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1258 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1260 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1269 msgid "" "Only a single object may be printed at a time in Spiral Vase mode. Either " "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" #: src/libslic3r/Print.cpp:1277 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1290 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:1296 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1298 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1300 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:1302 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:1304 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:1325 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1327 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1329 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1331 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1373 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:1399 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1408 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1411 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1422 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1430 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1434 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1456 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1461 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1620 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1646 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1655 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1678 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1682 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLA/Pad.cpp:532 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:630 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:642 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:648 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:663 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:670 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:786 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:44 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:359 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:65 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:192 msgid "Too many overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:201 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:247 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:411 src/libslic3r/SLAPrintSteps.cpp:420 #: src/libslic3r/SLAPrintSteps.cpp:459 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:451 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:619 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:72 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:56 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:61 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:66 msgid "G-code thumbnails" msgstr "" #: src/libslic3r/PrintConfig.cpp:67 msgid "" "Picture sizes to be stored into a .gcode and .sl1 files, in the following " "format: \"XxY, XxY, ...\"" msgstr "" #: src/libslic3r/PrintConfig.cpp:75 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:82 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:83 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:91 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:93 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:101 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:102 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" #: src/libslic3r/PrintConfig.cpp:110 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:111 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:118 msgid "Name of the printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:125 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:131 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:133 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:149 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:155 msgid "Printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:156 msgid "Related printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:161 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:166 msgid "API key" msgstr "" #: src/libslic3r/PrintConfig.cpp:167 msgid "HTTP digest" msgstr "" #: src/libslic3r/PrintConfig.cpp:180 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:181 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:188 msgid "Avoid crossing perimeters - Max detour length" msgstr "" #: src/libslic3r/PrintConfig.cpp:190 msgid "" "The maximum detour length for avoid crossing perimeters. If the detour is " "longer than this value, avoid crossing perimeters is not applied for this " "travel path. Detour length could be specified either as an absolute value or " "as percentage (for example 50%) of a direct travel path." msgstr "" #: src/libslic3r/PrintConfig.cpp:193 msgid "mm or % (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:199 src/libslic3r/PrintConfig.cpp:2291 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:200 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:203 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:210 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:220 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:221 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:232 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:233 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:241 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:243 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:249 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:250 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:252 src/libslic3r/PrintConfig.cpp:395 #: src/libslic3r/PrintConfig.cpp:940 src/libslic3r/PrintConfig.cpp:1079 #: src/libslic3r/PrintConfig.cpp:1360 src/libslic3r/PrintConfig.cpp:1409 #: src/libslic3r/PrintConfig.cpp:1419 src/libslic3r/PrintConfig.cpp:1612 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:258 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:260 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:263 src/libslic3r/PrintConfig.cpp:852 #: src/libslic3r/PrintConfig.cpp:1853 src/libslic3r/PrintConfig.cpp:1863 #: src/libslic3r/PrintConfig.cpp:2121 src/libslic3r/PrintConfig.cpp:2276 #: src/libslic3r/PrintConfig.cpp:2475 src/libslic3r/PrintConfig.cpp:2976 #: src/libslic3r/PrintConfig.cpp:3097 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:269 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:270 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:271 src/libslic3r/PrintConfig.cpp:864 #: src/libslic3r/PrintConfig.cpp:1248 src/libslic3r/PrintConfig.cpp:1427 #: src/libslic3r/PrintConfig.cpp:1490 src/libslic3r/PrintConfig.cpp:1745 #: src/libslic3r/PrintConfig.cpp:2653 src/libslic3r/PrintConfig.cpp:2890 #: src/libslic3r/PrintConfig.cpp:3016 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:278 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:280 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:290 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:292 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:293 src/libslic3r/PrintConfig.cpp:671 #: src/libslic3r/PrintConfig.cpp:679 src/libslic3r/PrintConfig.cpp:688 #: src/libslic3r/PrintConfig.cpp:696 src/libslic3r/PrintConfig.cpp:723 #: src/libslic3r/PrintConfig.cpp:742 src/libslic3r/PrintConfig.cpp:1015 #: src/libslic3r/PrintConfig.cpp:1194 src/libslic3r/PrintConfig.cpp:1267 #: src/libslic3r/PrintConfig.cpp:1343 src/libslic3r/PrintConfig.cpp:1377 #: src/libslic3r/PrintConfig.cpp:1389 src/libslic3r/PrintConfig.cpp:1399 #: src/libslic3r/PrintConfig.cpp:1449 src/libslic3r/PrintConfig.cpp:1508 #: src/libslic3r/PrintConfig.cpp:1642 src/libslic3r/PrintConfig.cpp:1820 #: src/libslic3r/PrintConfig.cpp:1829 src/libslic3r/PrintConfig.cpp:2255 #: src/libslic3r/PrintConfig.cpp:2382 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:300 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:301 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:308 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:309 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:316 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:317 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:327 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:328 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:342 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:343 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:360 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:361 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:369 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:370 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:375 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:376 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:383 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:384 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:392 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:401 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:402 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:408 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:409 src/libslic3r/PrintConfig.cpp:2820 #: src/libslic3r/PrintConfig.cpp:2831 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:415 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:416 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:425 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:427 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:433 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:434 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:442 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:452 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:463 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:465 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:471 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:473 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:918 #: src/libslic3r/PrintConfig.cpp:2236 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:484 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:485 src/libslic3r/PrintConfig.cpp:919 msgid "Aligned Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:486 src/libslic3r/PrintConfig.cpp:925 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:487 src/libslic3r/PrintConfig.cpp:929 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:930 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:489 src/libslic3r/PrintConfig.cpp:931 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:495 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:497 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:506 src/libslic3r/PrintConfig.cpp:517 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:508 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:511 src/libslic3r/PrintConfig.cpp:621 #: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:975 #: src/libslic3r/PrintConfig.cpp:1104 src/libslic3r/PrintConfig.cpp:1159 #: src/libslic3r/PrintConfig.cpp:1185 src/libslic3r/PrintConfig.cpp:1632 #: src/libslic3r/PrintConfig.cpp:1961 src/libslic3r/PrintConfig.cpp:2110 #: src/libslic3r/PrintConfig.cpp:2178 src/libslic3r/PrintConfig.cpp:2339 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:519 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:522 src/libslic3r/PrintConfig.cpp:984 #: src/libslic3r/PrintConfig.cpp:1920 src/libslic3r/PrintConfig.cpp:1972 #: src/libslic3r/PrintConfig.cpp:2222 src/libslic3r/PrintConfig.cpp:2352 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:529 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:531 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:537 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:539 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:549 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:561 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:572 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:582 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:583 src/libslic3r/PrintConfig.cpp:645 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:589 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:590 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:599 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:600 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:605 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:606 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:615 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:617 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:628 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:629 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:634 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:635 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:637 src/libslic3r/PrintConfig.cpp:1908 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:644 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:650 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:651 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:659 src/libslic3r/PrintConfig.cpp:1455 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:660 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:669 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:670 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:677 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:678 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:685 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:686 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:694 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:695 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:702 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:703 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:712 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:713 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:721 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:722 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:729 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:730 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:734 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:740 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:741 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:748 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:749 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:756 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:757 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:763 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:764 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:772 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:2731 #: src/libslic3r/PrintConfig.cpp:2732 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:780 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:783 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:788 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:789 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:816 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:817 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:823 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:824 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:829 msgid "Spool weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:830 msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " "filament spool before printing and one may compare the measured weight with " "the calculated weight of the filament with the spool to find out whether the " "amount of filament on the spool is sufficient to finish the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:834 msgid "g" msgstr "" #: src/libslic3r/PrintConfig.cpp:843 src/libslic3r/PrintConfig.cpp:2815 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:847 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:849 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:861 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:863 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:898 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:900 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:920 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:921 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:922 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:923 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:924 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:926 src/libslic3r/PrintConfig.cpp:2238 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:927 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:928 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:932 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:933 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:937 src/libslic3r/PrintConfig.cpp:946 #: src/libslic3r/PrintConfig.cpp:956 src/libslic3r/PrintConfig.cpp:990 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:938 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:947 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:948 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:958 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:971 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:980 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:981 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:991 msgid "First layer nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:992 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:1000 msgid "Full fan speed at layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:1001 msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " "\"full_fan_speed_layer\" will be ignored if lower than " "\"disable_fan_first_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"disable_fan_first_layers\" + 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1013 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:1021 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1022 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:1029 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1030 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1055 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1060 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1061 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1068 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1069 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1077 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1085 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1087 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1090 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1096 msgid "Length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1098 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " "anchor_length_max. Set this parameter to zero to disable anchoring " "perimeters connected to a single infill line." msgstr "" #: src/libslic3r/PrintConfig.cpp:1113 msgid "0 (no open anchors)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1118 src/libslic3r/PrintConfig.cpp:1140 msgid "1000 (unlimited)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1123 msgid "Maximum length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1125 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " "parameter. Set this parameter to zero to disable anchoring." msgstr "" #: src/libslic3r/PrintConfig.cpp:1135 msgid "0 (not anchored)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1145 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1147 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1155 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1165 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1166 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1171 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1173 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1180 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1182 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1193 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1201 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1202 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1215 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1216 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1224 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1225 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1233 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1238 msgid "All top surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1239 msgid "Topmost surface only" msgstr "" #: src/libslic3r/PrintConfig.cpp:1240 msgid "All solid surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1245 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1247 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1255 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1257 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1274 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1285 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1286 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1294 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1295 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1300 msgid "How to apply limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1301 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1303 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1308 msgid "Emit to G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1309 msgid "Use for time estimate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1310 msgid "Ignore" msgstr "" #: src/libslic3r/PrintConfig.cpp:1333 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1334 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1335 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1336 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1339 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1340 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1341 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1342 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1350 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1351 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1352 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1353 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1356 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1357 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1358 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1359 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1367 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1368 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1369 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1370 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1373 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1374 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1375 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1376 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1386 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1388 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1396 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1398 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1406 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1408 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1416 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1418 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1425 src/libslic3r/PrintConfig.cpp:1434 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1426 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1435 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1445 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1446 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1456 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1465 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1466 src/libslic3r/PrintConfig.cpp:1477 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1470 src/libslic3r/PrintConfig.cpp:1481 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1476 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1488 src/libslic3r/PrintConfig.cpp:1497 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1489 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1498 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1506 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1507 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1514 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1515 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1524 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1525 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1535 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1540 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1541 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1558 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1559 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1566 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1573 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1574 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1583 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1585 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1591 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1592 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1600 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1601 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1609 src/libslic3r/PrintConfig.cpp:1626 #: src/libslic3r/PrintConfig.cpp:1639 src/libslic3r/PrintConfig.cpp:1649 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1610 msgid "" "This is the acceleration your printer will use for perimeters. Set zero to " "disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1617 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1619 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1628 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1641 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1655 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1663 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1675 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1676 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1681 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1682 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1690 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1691 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1696 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1714 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1716 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1724 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1725 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1735 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1736 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1742 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1743 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1750 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1751 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1756 src/libslic3r/PrintConfig.cpp:1764 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1757 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1758 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1760 src/libslic3r/PrintConfig.cpp:1769 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1765 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1766 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1774 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1775 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1782 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1783 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1784 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1791 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1792 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1793 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1801 src/libslic3r/PrintConfig.cpp:1809 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1802 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1810 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1817 src/libslic3r/PrintConfig.cpp:1818 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1819 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1825 src/libslic3r/PrintConfig.cpp:1826 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1827 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1834 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1836 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1842 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1843 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1844 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1852 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1854 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1855 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1862 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1864 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1865 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1872 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1873 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1880 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1881 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1888 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:1889 msgid "" "If enabled, the skirt will be as tall as a highest printed object. This is " "useful to protect an ABS or ASA print from warping and detaching from print " "bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:1895 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1896 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1897 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1905 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1906 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1915 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1917 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1927 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1929 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1930 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1936 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1938 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1944 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1946 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1958 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1969 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1981 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1987 src/libslic3r/PrintConfig.cpp:1988 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:1994 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1995 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" #: src/libslic3r/PrintConfig.cpp:2003 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2004 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:2014 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:2029 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:2045 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2046 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2055 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:2064 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2072 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2073 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:2078 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:2079 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2084 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2085 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2092 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2094 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2098 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2100 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2106 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2108 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2118 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2120 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2130 src/libslic3r/PrintConfig.cpp:2925 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2136 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2138 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2145 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2146 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2151 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2153 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2158 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2164 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2166 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2175 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2184 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2186 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2191 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2193 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2200 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2202 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2209 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2211 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2220 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2229 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2231 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2237 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2243 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2245 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2254 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2261 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2263 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2269 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2271 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2283 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2285 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2292 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2295 msgid "Nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2301 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2303 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2309 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2310 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2322 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {previous_extruder} and " "{next_extruder} can be used. When a tool-changing command which changes to " "the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2335 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2347 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2362 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2363 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2371 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2374 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2381 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2389 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2390 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2396 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2397 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2403 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2404 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2414 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2415 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2421 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2422 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2429 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2435 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2436 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2442 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2443 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2452 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2453 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2459 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2460 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2467 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2473 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2474 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2481 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2482 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2489 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2490 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2496 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2497 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2503 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2505 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2513 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2514 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2581 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2582 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2587 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2588 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2593 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2595 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2601 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2606 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2607 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:2608 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2613 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2614 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:2615 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2620 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2621 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2627 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2628 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2633 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2634 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2635 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2642 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2643 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2644 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2651 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2652 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2659 src/libslic3r/PrintConfig.cpp:2660 #: src/libslic3r/PrintConfig.cpp:2661 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2668 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2669 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2675 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2677 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2685 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2686 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2699 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2710 src/libslic3r/PrintConfig.cpp:2711 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2717 src/libslic3r/PrintConfig.cpp:2718 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:2719 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2724 src/libslic3r/PrintConfig.cpp:2725 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:2726 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:2733 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2740 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2745 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2746 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2753 src/libslic3r/PrintConfig.cpp:2754 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2761 src/libslic3r/PrintConfig.cpp:2762 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2769 src/libslic3r/PrintConfig.cpp:2770 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2776 src/libslic3r/PrintConfig.cpp:2777 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2784 src/libslic3r/PrintConfig.cpp:2785 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2792 src/libslic3r/PrintConfig.cpp:2793 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2799 src/libslic3r/PrintConfig.cpp:2800 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2806 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2807 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2819 src/libslic3r/PrintConfig.cpp:2830 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2841 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2843 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2848 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2850 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2857 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2859 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2866 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2868 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2876 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2878 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2886 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:2888 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:2897 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:2899 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:2907 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2908 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2916 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2917 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2918 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2930 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2932 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2941 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2943 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2951 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2953 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2960 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2963 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2973 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2975 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2983 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2985 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2992 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2994 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:3004 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:3015 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:3021 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:3023 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:3029 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:3031 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:3036 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3038 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3046 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3047 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:3060 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:3061 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:3071 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3073 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3093 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3095 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3106 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3111 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3113 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3118 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3120 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3129 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3131 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3138 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3140 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3147 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3150 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3157 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:3159 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:3164 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3166 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:3174 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:3176 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:3186 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3602 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:3603 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:3614 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:3615 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:3620 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3621 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3625 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3626 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3630 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:3631 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:3636 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:3641 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3642 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:3647 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:3648 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3653 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3654 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3659 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3660 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3664 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3665 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3669 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3670 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3674 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3675 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3685 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3686 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3691 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3712 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3713 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3717 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3718 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3721 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3722 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3726 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3727 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3731 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3736 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3740 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3744 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3745 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3749 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3750 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3755 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3760 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3763 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3764 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3773 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3774 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3777 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3778 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3781 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3782 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3786 msgid "Single instance mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:3787 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:3798 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3799 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3802 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3803 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:3809 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3810 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:112 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:157 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:260 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:421 msgid "Generating support material" msgstr ""