# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2022-01-20 11:08+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:303 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:267 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:141 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:210 #, possible-c-format, possible-boost-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:367 #: src/slic3r/GUI/GUI_App.cpp:262 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:269 src/slic3r/GUI/GUI_App.cpp:268 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:270 src/slic3r/GUI/GUI_App.cpp:268 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:271 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:272 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:308 msgid "Copy Version Info" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79 #, possible-c-format, possible-boost-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84 #, possible-boost-format msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85 msgid "" "Please save your project and restart PrusaSlicer. We would be glad if you " "reported the issue." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:204 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:199 #, possible-boost-format msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:286 msgid "Access violation" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:288 msgid "Illegal instruction" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290 msgid "Divide by zero" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:292 msgid "Overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:294 msgid "Underflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:297 msgid "Floating reserved operand" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300 msgid "Stack overflow" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:659 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:726 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:690 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710 msgid "Unknown error occured during exporting G-code." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:695 #, possible-boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?\n" "Error message: %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:698 #, possible-boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:701 #, possible-boost-format msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:704 #, possible-boost-format msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:707 #, possible-boost-format msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715 #, possible-boost-format msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:729 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:751 #, possible-boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:31 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:218 src/slic3r/GUI/Plater.cpp:204 #: src/slic3r/GUI/Tab.cpp:2755 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:32 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:33 src/libslic3r/PrintConfig.cpp:994 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:49 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:58 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:262 #: src/slic3r/GUI/ConfigWizard.cpp:1476 src/slic3r/GUI/ConfigWizard.cpp:1490 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100 #: src/slic3r/GUI/GCodeViewer.cpp:3176 src/slic3r/GUI/GCodeViewer.cpp:3182 #: src/slic3r/GUI/GCodeViewer.cpp:3190 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478 #: src/slic3r/GUI/ObjectDataViewModel.cpp:134 #: src/slic3r/GUI/WipeTowerDialog.cpp:116 src/libslic3r/PrintConfig.cpp:250 #: src/libslic3r/PrintConfig.cpp:267 src/libslic3r/PrintConfig.cpp:274 #: src/libslic3r/PrintConfig.cpp:437 src/libslic3r/PrintConfig.cpp:497 #: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:598 #: src/libslic3r/PrintConfig.cpp:606 src/libslic3r/PrintConfig.cpp:656 #: src/libslic3r/PrintConfig.cpp:787 src/libslic3r/PrintConfig.cpp:798 #: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:997 #: src/libslic3r/PrintConfig.cpp:1212 src/libslic3r/PrintConfig.cpp:1279 #: src/libslic3r/PrintConfig.cpp:1289 src/libslic3r/PrintConfig.cpp:1569 #: src/libslic3r/PrintConfig.cpp:1763 src/libslic3r/PrintConfig.cpp:1824 #: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:1860 #: src/libslic3r/PrintConfig.cpp:1923 src/libslic3r/PrintConfig.cpp:1933 #: src/libslic3r/PrintConfig.cpp:2047 src/libslic3r/PrintConfig.cpp:2056 #: src/libslic3r/PrintConfig.cpp:2075 src/libslic3r/PrintConfig.cpp:2096 #: src/libslic3r/PrintConfig.cpp:2108 src/libslic3r/PrintConfig.cpp:2116 #: src/libslic3r/PrintConfig.cpp:2157 src/libslic3r/PrintConfig.cpp:2165 #: src/libslic3r/PrintConfig.cpp:2175 src/libslic3r/PrintConfig.cpp:2183 #: src/libslic3r/PrintConfig.cpp:2191 src/libslic3r/PrintConfig.cpp:2253 #: src/libslic3r/PrintConfig.cpp:2483 src/libslic3r/PrintConfig.cpp:2553 #: src/libslic3r/PrintConfig.cpp:2570 src/libslic3r/PrintConfig.cpp:2671 #: src/libslic3r/PrintConfig.cpp:2680 src/libslic3r/PrintConfig.cpp:2730 #: src/libslic3r/PrintConfig.cpp:2882 src/libslic3r/PrintConfig.cpp:2970 #: src/libslic3r/PrintConfig.cpp:2977 src/libslic3r/PrintConfig.cpp:2984 #: src/libslic3r/PrintConfig.cpp:2998 src/libslic3r/PrintConfig.cpp:3022 #: src/libslic3r/PrintConfig.cpp:3032 src/libslic3r/PrintConfig.cpp:3042 #: src/libslic3r/PrintConfig.cpp:3226 src/libslic3r/PrintConfig.cpp:3267 #: src/libslic3r/PrintConfig.cpp:3427 src/libslic3r/PrintConfig.cpp:3436 #: src/libslic3r/PrintConfig.cpp:3445 src/libslic3r/PrintConfig.cpp:3455 #: src/libslic3r/PrintConfig.cpp:3520 src/libslic3r/PrintConfig.cpp:3530 #: src/libslic3r/PrintConfig.cpp:3542 src/libslic3r/PrintConfig.cpp:3562 #: src/libslic3r/PrintConfig.cpp:3572 src/libslic3r/PrintConfig.cpp:3582 #: src/libslic3r/PrintConfig.cpp:3600 src/libslic3r/PrintConfig.cpp:3615 #: src/libslic3r/PrintConfig.cpp:3629 src/libslic3r/PrintConfig.cpp:3640 #: src/libslic3r/PrintConfig.cpp:3653 src/libslic3r/PrintConfig.cpp:3698 #: src/libslic3r/PrintConfig.cpp:3708 src/libslic3r/PrintConfig.cpp:3717 #: src/libslic3r/PrintConfig.cpp:3727 src/libslic3r/PrintConfig.cpp:3743 #: src/libslic3r/PrintConfig.cpp:3767 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:66 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:79 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:80 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:81 src/slic3r/GUI/GUI_Preview.cpp:252 #: src/libslic3r/ExtrusionEntity.cpp:331 src/libslic3r/ExtrusionEntity.cpp:366 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:179 #: src/slic3r/GUI/GUI_ObjectList.cpp:1701 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:203 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:249 src/slic3r/GUI/GCodeViewer.cpp:3705 #: src/slic3r/GUI/MainFrame.cpp:2140 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:273 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:283 src/slic3r/GUI/BedShapeDialog.cpp:354 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/BedShapeDialog.cpp:362 #: src/slic3r/GUI/Tab.cpp:3734 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:317 src/slic3r/GUI/BedShapeDialog.cpp:388 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:344 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:508 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:514 src/slic3r/GUI/BedShapeDialog.cpp:562 #: src/slic3r/GUI/BedShapeDialog.cpp:584 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:525 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:533 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:537 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:552 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:574 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:95 src/slic3r/GUI/ConfigWizard.cpp:1396 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:224 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:231 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:42 msgid "Revert color to default" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:57 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:58 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:62 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:49 msgid "" "Layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:50 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1453 #: src/libslic3r/PrintConfig.cpp:263 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:61 msgid "" "First layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:62 src/libslic3r/PrintConfig.cpp:1208 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:82 msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:90 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:91 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:121 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:125 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:126 #: src/slic3r/GUI/ConfigManipulation.cpp:146 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:142 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:145 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:164 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:167 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:168 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:195 #, possible-boost-format msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:198 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:199 #: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128 #: src/slic3r/GUI/Plater.cpp:460 src/slic3r/GUI/Tab.cpp:1506 #: src/slic3r/GUI/Tab.cpp:1508 src/libslic3r/PrintConfig.cpp:452 #: src/libslic3r/PrintConfig.cpp:693 src/libslic3r/PrintConfig.cpp:717 #: src/libslic3r/PrintConfig.cpp:1071 src/libslic3r/PrintConfig.cpp:1085 #: src/libslic3r/PrintConfig.cpp:1122 src/libslic3r/PrintConfig.cpp:1375 #: src/libslic3r/PrintConfig.cpp:1385 src/libslic3r/PrintConfig.cpp:1454 #: src/libslic3r/PrintConfig.cpp:1474 src/libslic3r/PrintConfig.cpp:1493 #: src/libslic3r/PrintConfig.cpp:2314 src/libslic3r/PrintConfig.cpp:2331 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:327 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:329 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:340 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:342 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:317 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28 #: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:317 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1337 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1339 msgid "SLA print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340 #: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1340 msgid "SLA material" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1341 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1370 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93 #, possible-c-format, possible-boost-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:262 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:266 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:330 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:330 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:332 src/slic3r/GUI/ConfigWizard.cpp:652 #: src/slic3r/GUI/DoubleSlider.cpp:2030 src/slic3r/GUI/Plater.cpp:432 #: src/slic3r/GUI/Plater.cpp:578 src/slic3r/GUI/Preferences.cpp:436 #: src/libslic3r/PrintConfig.cpp:1268 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:484 #, possible-c-format, possible-boost-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:486 #, possible-c-format, possible-boost-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:488 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:490 #, possible-c-format, possible-boost-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:495 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:498 msgid "" "Perform desktop integration (Sets this binary to be searchable by the " "system)." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:550 #, possible-c-format, possible-boost-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:640 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:642 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:643 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:720 src/slic3r/GUI/ConfigWizard.cpp:892 #: src/slic3r/GUI/ConfigWizard.cpp:952 src/slic3r/GUI/ConfigWizard.cpp:1088 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:752 #, possible-boost-format msgid "" "%1% marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:752 src/slic3r/GUI/ConfigWizard.cpp:2043 #: src/slic3r/GUI/ConfigWizard.cpp:2912 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:752 msgid "SLA materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:755 #, possible-boost-format msgid "All installed printers are compatible with the selected %1%." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1338 msgid "filament" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:778 msgid "" "Only the following installed printers are compatible with the selected " "filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:779 msgid "" "Only the following installed printers are compatible with the selected SLA " "materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1175 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1175 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1177 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1179 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1206 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1206 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1214 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1218 #, possible-c-format, possible-boost-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1224 src/slic3r/GUI/Preferences.cpp:175 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1228 #, possible-c-format, possible-boost-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1231 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1236 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726 #: src/slic3r/GUI/Plater.cpp:3548 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1246 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1250 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1259 msgid "Files association" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1261 src/slic3r/GUI/Preferences.cpp:157 msgid "Associate .3mf files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/Preferences.cpp:164 msgid "Associate .stl files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1272 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1274 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1279 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1280 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1281 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1287 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1288 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1322 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1326 #, possible-c-format, possible-boost-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1357 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1357 src/slic3r/GUI/Tab.cpp:2358 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1361 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1396 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1399 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1433 src/slic3r/GUI/Field.cpp:255 #: src/slic3r/GUI/Field.cpp:324 src/slic3r/GUI/Field.cpp:1563 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:429 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1457 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1457 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1472 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1475 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1485 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1486 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1489 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1547 msgid "Nozzle and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1547 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1563 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1564 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1567 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1568 src/slic3r/GUI/ConfigWizard.cpp:1582 #: src/libslic3r/PrintConfig.cpp:395 src/libslic3r/PrintConfig.cpp:1188 #: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:2792 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1577 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1578 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1581 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2043 src/slic3r/GUI/ConfigWizard.cpp:2915 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2097 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2102 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2338 #, possible-boost-format msgid "" "Following printer profiles has no default filament: %1%Please select one " "manually." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2339 #, possible-boost-format msgid "" "Following printer profiles has no default material: %1%Please select one " "manually." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2340 src/slic3r/GUI/ConfigWizard.cpp:2438 #: src/slic3r/GUI/DoubleSlider.cpp:2521 src/slic3r/GUI/DoubleSlider.cpp:2542 #: src/slic3r/GUI/GUI.cpp:232 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2459 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2463 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2477 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2481 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2523 msgid "Configuration is edited in ConfigWizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2566 msgid "All user presets will be deleted." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2596 msgid "A new vendor was installed and one of its printers will be activated" msgid_plural "" "New vendors were installed and one of theirs printers will be activated" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/ConfigWizard.cpp:2625 msgid "Do you want to continue changing the configuration?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2691 msgid "A new Printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2696 msgid "Some Printers were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2717 msgid "A new filament was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2718 msgid "A new SLA material was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2729 msgid "Some filaments were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2729 msgid "Some SLA materials were uninstalled." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2773 msgid "Custom printer was installed and it will be activated." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2858 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2861 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2862 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2863 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2864 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:490 #: src/slic3r/GUI/FirmwareDialog.cpp:153 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:878 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2884 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2892 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2912 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2912 src/slic3r/GUI/ConfigWizard.cpp:2915 #: src/slic3r/GUI/GUI_ObjectList.cpp:3781 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2915 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3036 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3037 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3039 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:3040 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232 msgid "" "Performing desktop integration failed - boost::filesystem::canonical did not " "return appimage path." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243 msgid "Performing desktop integration failed - Could not find executable." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:378 msgid "" "Performing desktop integration failed because the application directory was " "not found." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:419 msgid "" "Performing desktop integration failed - could not create Gcodeviewer desktop " "file. PrusaSlicer desktop file was probably created successfully." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459 #: src/slic3r/GUI/GUI_App.cpp:2222 msgid "Desktop Integration" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:466 msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:480 msgid "Perform" msgstr "" #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:486 #: src/slic3r/GUI/GLCanvas3D.cpp:4689 src/slic3r/GUI/KBShortcutsDialog.cpp:97 #: src/slic3r/GUI/MainFrame.cpp:1335 msgid "Undo" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:109 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1379 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1381 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1385 src/slic3r/GUI/DoubleSlider.cpp:2254 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1388 #, possible-c-format, possible-boost-format msgid "" "Jump to height %s\n" "Set ruler mode\n" "or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1391 #, possible-c-format, possible-boost-format msgid "" "Jump to height %s\n" "or Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1396 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1398 msgid "This is wipe tower layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1408 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing sequentually." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1412 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1426 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1428 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1430 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1431 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1433 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1434 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1440 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1458 msgid "continue" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1466 #, possible-boost-format msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1467 #, possible-boost-format msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1469 #, possible-boost-format msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1471 #, possible-boost-format msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1473 #, possible-boost-format msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1480 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1482 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1485 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1488 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1491 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1496 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1498 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1499 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1602 src/slic3r/GUI/DoubleSlider.cpp:1633 #: src/slic3r/GUI/GUI_Factories.cpp:778 #, possible-c-format, possible-boost-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1603 src/slic3r/GUI/GUI_Factories.cpp:779 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1612 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1612 src/slic3r/GUI/GUI_Factories.cpp:740 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1613 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1615 src/slic3r/GUI/GUI_Factories.cpp:787 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1634 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1642 #, possible-boost-format msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1643 #, possible-boost-format msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1968 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1979 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1983 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1986 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2004 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2005 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2006 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2012 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2013 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2014 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2015 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2025 src/slic3r/GUI/DoubleSlider.cpp:2254 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2030 msgid "Hide ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2034 msgid "Show object height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2034 msgid "Show object height on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2038 msgid "Show estimated print time" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2038 msgid "Show estimated print time on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2042 msgid "Ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2042 msgid "Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2047 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2051 msgid "Set auto color changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2086 msgid "This action will cause deletion of all ticks on vertical slider." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2087 src/slic3r/GUI/Tab.cpp:1322 msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2088 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1133 src/slic3r/GUI/GUI.cpp:245 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:645 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:675 #: src/slic3r/GUI/WipeTowerDialog.cpp:58 src/slic3r/GUI/WipeTowerDialog.cpp:443 msgid "Warning" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2215 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2216 #, possible-boost-format msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2237 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2238 #, possible-boost-format msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2253 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2253 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2514 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2515 src/slic3r/GUI/DoubleSlider.cpp:2531 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2517 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2518 src/slic3r/GUI/DoubleSlider.cpp:2539 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2532 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2535 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2537 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2538 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:538 #: src/slic3r/GUI/GUI_ObjectList.cpp:550 src/slic3r/GUI/GUI_ObjectList.cpp:979 #: src/slic3r/GUI/GUI_ObjectList.cpp:1966 #: src/slic3r/GUI/GUI_ObjectList.cpp:4282 #: src/slic3r/GUI/ObjectDataViewModel.cpp:250 #: src/slic3r/GUI/ObjectDataViewModel.cpp:352 #: src/slic3r/GUI/ObjectDataViewModel.cpp:376 #: src/slic3r/GUI/ObjectDataViewModel.cpp:607 src/libslic3r/PrintConfig.cpp:774 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60 #: src/libslic3r/PrintConfig.cpp:639 src/libslic3r/PrintConfig.cpp:1388 #: src/libslic3r/PrintConfig.cpp:2085 src/libslic3r/PrintConfig.cpp:2260 #: src/libslic3r/PrintConfig.cpp:2336 src/libslic3r/PrintConfig.cpp:2589 #: src/libslic3r/PrintConfig.cpp:2637 src/libslic3r/PrintConfig.cpp:2656 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164 msgid "Random sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166 msgid "If enabled, random sequence of the selected extruders will be used." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172 msgid "Allow next color repetition" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174 msgid "If enabled, a repetition of the next random color will be allowed." msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:190 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:193 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:226 src/slic3r/GUI/Field.cpp:298 #, possible-c-format, possible-boost-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:266 #, possible-c-format, possible-boost-format msgid "" "Input value is out of range\n" "Are you sure that %s is a correct value and that you want to continue?" msgstr "" #: src/slic3r/GUI/Field.cpp:269 src/slic3r/GUI/Field.cpp:343 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/Field.cpp:282 src/slic3r/GUI/Field.cpp:390 #: src/slic3r/GUI/Field.cpp:1575 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:340 #, possible-c-format, possible-boost-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:397 #, possible-boost-format msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:154 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:201 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:285 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:333 #, possible-c-format, possible-boost-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455 #, possible-c-format, possible-boost-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:437 #, possible-c-format, possible-boost-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:549 #, possible-c-format, possible-boost-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:650 #, possible-c-format, possible-boost-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:652 #, possible-c-format, possible-boost-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:787 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:812 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:813 msgid "Select a file" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:815 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:297 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:372 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:819 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:827 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:830 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:831 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:851 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:862 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:310 #: src/slic3r/GUI/Mouse3DController.cpp:543 #: src/slic3r/GUI/PrintHostDialogs.cpp:261 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:122 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:915 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:916 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:919 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1397 msgid "Shape Gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:76 msgid "Select shape from the gallery" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:100 msgid "Add to bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:101 msgid "Add selected shape(s) to the bed" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4088 msgid "Add" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:117 msgid "Add one or more custom shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/GalleryDialog.cpp:508 #: src/slic3r/GUI/GLCanvas3D.cpp:4480 src/slic3r/GUI/GUI_Factories.cpp:444 #: src/slic3r/GUI/Tab.cpp:3734 msgid "Delete" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:118 msgid "Delete one or more custom shape. You can't delete system shapes" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:402 msgid "Choose one or more files (STL, OBJ):" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:442 #, possible-boost-format msgid "" "It looks like selected %1%-file has an error or is destructed.\n" "We can't load this file" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:453 msgid "Choose one PNG file:" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:466 msgid "Replacing of the PNG" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:510 msgid "Change thumbnail" msgstr "" #: src/slic3r/GUI/GalleryDialog.cpp:551 src/slic3r/GUI/GalleryDialog.cpp:556 #, possible-boost-format msgid "Loading of the \"%1%\"" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:274 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1457 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1517 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1852 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3047 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3047 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3176 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3182 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3190 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3190 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3240 src/slic3r/GUI/GCodeViewer.cpp:3241 #: src/slic3r/GUI/GCodeViewer.cpp:3290 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3251 src/slic3r/GUI/GCodeViewer.cpp:3290 #: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:958 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3251 src/slic3r/GUI/GCodeViewer.cpp:3290 #: src/slic3r/GUI/RammingChart.cpp:90 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3290 src/slic3r/GUI/GCodeViewer.cpp:3301 #: src/slic3r/GUI/GCodeViewer.cpp:3562 msgid "Used filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3293 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3294 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3295 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3296 msgid "Fan Speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3297 msgid "Temperature (°C)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3298 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3301 src/slic3r/GUI/GUI_Preview.cpp:224 #: src/slic3r/GUI/GUI_Preview.cpp:958 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3304 src/slic3r/GUI/GUI_Preview.cpp:225 #: src/slic3r/GUI/GUI_Preview.cpp:957 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3342 src/slic3r/GUI/GCodeViewer.cpp:3388 #: src/slic3r/GUI/GCodeViewer.cpp:3393 src/slic3r/GUI/GUI_ObjectList.cpp:312 #: src/slic3r/GUI/wxExtensions.cpp:536 src/libslic3r/PrintConfig.cpp:769 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3365 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3388 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3487 src/slic3r/GUI/GCodeViewer.cpp:3543 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3506 src/slic3r/GUI/GCodeViewer.cpp:3541 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3542 src/slic3r/GUI/GCodeViewer.cpp:3576 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3559 src/slic3r/GUI/GCodeViewer.cpp:3562 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3559 src/slic3r/GUI/GCodeViewer.cpp:3562 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3559 src/slic3r/GUI/GCodeViewer.cpp:3562 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3605 src/slic3r/GUI/GUI_Preview.cpp:1049 #: src/libslic3r/PrintConfig.cpp:2887 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3608 msgid "Movement" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3609 msgid "Extrusion" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3610 src/slic3r/GUI/Tab.cpp:1862 #: src/slic3r/GUI/Tab.cpp:2802 msgid "Retraction" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3627 src/slic3r/GUI/GCodeViewer.cpp:3630 #: src/slic3r/GUI/GUI_Preview.cpp:1050 msgid "Wipe" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3662 src/slic3r/GUI/GUI_Preview.cpp:257 #: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906 msgid "Options" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3665 src/slic3r/GUI/GUI_Preview.cpp:1051 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3666 src/slic3r/GUI/GUI_Preview.cpp:1052 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:1053 msgid "Seams" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3668 src/slic3r/GUI/GUI_Preview.cpp:1054 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3669 src/slic3r/GUI/GUI_Preview.cpp:1055 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3670 src/slic3r/GUI/GUI_Preview.cpp:1056 msgid "Print pauses" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3671 src/slic3r/GUI/GUI_Preview.cpp:1057 msgid "Custom G-codes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3691 src/slic3r/GUI/GCodeViewer.cpp:3710 #: src/slic3r/GUI/GUI.cpp:341 src/slic3r/GUI/Plater.cpp:821 #: src/libslic3r/PrintConfig.cpp:299 msgid "Printer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3693 src/slic3r/GUI/GCodeViewer.cpp:3715 #: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:817 msgid "Print settings" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3696 src/slic3r/GUI/GCodeViewer.cpp:3722 #: src/slic3r/GUI/GUI.cpp:339 src/slic3r/GUI/Plater.cpp:818 #: src/slic3r/GUI/Tab.cpp:1962 src/slic3r/GUI/Tab.cpp:1963 msgid "Filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3735 msgid "Estimated printing times" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3754 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3755 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3762 src/libslic3r/PrintConfig.cpp:1166 #: src/libslic3r/PrintConfig.cpp:1184 src/libslic3r/PrintConfig.cpp:1194 #: src/libslic3r/PrintConfig.cpp:1239 msgid "First layer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3763 msgid "Total" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3792 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:3796 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:225 src/slic3r/GUI/GLCanvas3D.cpp:4627 #: src/slic3r/GUI/ObjectDataViewModel.cpp:53 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:227 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:229 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:231 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:233 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:235 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:237 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:239 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:241 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:243 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:245 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:248 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:254 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:257 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:268 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:274 src/libslic3r/PrintConfig.cpp:793 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:286 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:295 src/slic3r/GUI/GLCanvas3D.cpp:4056 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:561 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:676 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1265 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1273 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1281 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1684 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2557 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:560 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2640 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:562 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3245 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3766 src/slic3r/GUI/GLCanvas3D.cpp:4588 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3767 src/slic3r/GUI/GLCanvas3D.cpp:4588 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3768 src/slic3r/GUI/GLCanvas3D.cpp:4589 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3768 src/slic3r/GUI/GLCanvas3D.cpp:4589 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3769 src/slic3r/GUI/GLCanvas3D.cpp:4590 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3916 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3916 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3936 #, possible-c-format, possible-boost-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3936 #, possible-c-format, possible-boost-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3956 src/slic3r/GUI/GLCanvas3D.cpp:4606 #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 src/slic3r/GUI/Search.cpp:435 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3970 src/slic3r/GUI/GLCanvas3D.cpp:3978 #: src/slic3r/GUI/Search.cpp:441 msgid "Enter a search term" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4009 msgid "Arrange options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4039 #, possible-boost-format msgid "Press %1%left mouse button to enter the exact value" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4041 msgid "Spacing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4048 msgid "Enable rotations (slow)" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4066 src/slic3r/GUI/GLCanvas3D.cpp:4498 #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Plater.cpp:1666 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4472 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96 #: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4094 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4498 src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4498 msgid "Click right mouse button to show arrangement options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4520 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4529 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4541 src/slic3r/GUI/GUI_Factories.cpp:1084 #: src/slic3r/GUI/GUI_Factories.cpp:1108 src/slic3r/GUI/GUI_Factories.cpp:1119 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4552 src/slic3r/GUI/GUI_Factories.cpp:1087 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4565 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4575 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4689 src/slic3r/GUI/GLCanvas3D.cpp:4728 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4712 #, possible-boost-format msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4728 src/slic3r/GUI/KBShortcutsDialog.cpp:98 #: src/slic3r/GUI/MainFrame.cpp:1338 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4750 #, possible-boost-format msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6367 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6368 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6369 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6370 msgid "Some objects are not visible during editing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6372 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6446 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6461 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4326 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478 msgid "in" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:196 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:201 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33 #: src/slic3r/GUI/ObjectDataViewModel.cpp:49 msgid "Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Brush size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 msgid "Brush shape" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:434 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:429 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43 #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:68 #: src/libslic3r/PrintConfig.cpp:1147 msgid "Triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56 msgid "Highlight overhang by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126 msgid "Tool type" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127 msgid "Brush" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:128 msgid "Smart fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:131 msgid "Smart fill angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:132 msgid "Split triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67 msgid "On overhangs only" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:174 #, possible-boost-format msgid "" "Preselects faces by overhang angle. It is possible to restrict paintable " "facets to only preselected faces when the option \"%1%\" is enabled." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:217 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:378 msgid "Paints facets according to the chosen painting brush." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:391 msgid "" "Paints neighboring facets whose relative angle is less or equal to set angle." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:229 #, possible-boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:244 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:419 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:144 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:253 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:428 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:152 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:262 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:437 msgid "Paints only one facet." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:270 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:462 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:132 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:275 msgid "Splits bigger facets into smaller ones while the object is painted." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:308 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:483 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:170 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:313 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:488 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:175 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:364 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:365 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:432 msgid "Add supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:41 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33 #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:57 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34 #: src/libslic3r/PrintConfig.cpp:3759 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:286 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:402 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:589 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:666 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:760 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:810 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:27 #, possible-boost-format msgid "" "Your printer has more extruders than the multi-material painting gizmo " "supports. For this reason, only the first %1% extruders will be able to be " "used for painting." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:45 #: src/slic3r/GUI/ObjectDataViewModel.cpp:51 msgid "Multimaterial painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116 msgid "First color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118 msgid "Second color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:120 #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:671 msgid "Remove painted color" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121 msgid "Clear all" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:129 msgid "Bucket fill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:404 msgid "Paints neighboring facets that have the same color." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450 msgid "Split bigger facets into smaller ones while the object is painted." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:674 #, possible-boost-format msgid "Painted using: Extruder %1%" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:55 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:466 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:543 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578 #: src/libslic3r/PrintConfig.cpp:4380 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:505 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:552 #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:319 msgid "Apply" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:579 #: src/libslic3r/PrintConfig.cpp:4395 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:253 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:255 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52 msgid "Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:67 msgid "Mesh name" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:69 msgid "Detail level" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:70 msgid "Decimate ratio" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:113 #, possible-boost-format msgid "" "Processing model '%1%' with more than 1M triangles could be slow. It is " "highly recommend to reduce amount of triangles." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:116 #: src/slic3r/GUI/GUI_Factories.cpp:705 msgid "Simplify model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:143 msgid "Simplify" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:156 msgid "Simplification is currently only allowed when a single part is selected" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:157 #: src/slic3r/GUI/MainFrame.cpp:1162 src/slic3r/GUI/MainFrame.cpp:1619 #: src/slic3r/GUI/PrintHostDialogs.cpp:373 msgid "Error" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:250 msgid "Extra high" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:251 msgid "High" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:252 msgid "Medium" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:253 msgid "Low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:254 msgid "Extra low" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:304 #, possible-c-format, possible-boost-format msgid "%d triangles" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:307 msgid "Show wireframe" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:313 msgid "Operation already cancelling. Please wait few seconds." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322 msgid "Can't apply when proccess preview." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:329 #, possible-boost-format msgid "Process %1% / 100" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:479 #, possible-boost-format msgid "Simplify %1%" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1226 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1227 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46 #: src/libslic3r/PrintConfig.cpp:3589 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1229 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:372 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:522 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:702 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:770 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:876 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:898 msgid "Save support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:958 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1051 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1131 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1132 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1138 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1186 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1197 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:196 msgid "" "ERROR: Please close all manipulators available from the left toolbar first" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:561 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:673 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1270 msgid "" "You are currently editing SLA support points. Please, apply or discard your " "changes first." msgstr "" #: src/slic3r/GUI/GUI.cpp:292 msgid "Undefined" msgstr "" #: src/slic3r/GUI/GUI.cpp:317 #, possible-boost-format msgid "%1% was substituted with %2%" msgstr "" #: src/slic3r/GUI/GUI.cpp:326 msgid "" "Most likely the configuration was produced by a newer version of PrusaSlicer " "or by some PrusaSlicer fork." msgstr "" #: src/slic3r/GUI/GUI.cpp:327 msgid "The following values were substituted:" msgstr "" #: src/slic3r/GUI/GUI.cpp:328 msgid "Review the substitutions and adjust them if needed." msgstr "" #: src/slic3r/GUI/GUI.cpp:338 src/slic3r/GUI/Plater.cpp:819 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/GUI.cpp:342 src/slic3r/GUI/PhysicalPrinterDialog.cpp:157 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/GUI.cpp:355 msgid "" "Configuration bundle was loaded, however some configuration values were not " "recognized." msgstr "" #: src/slic3r/GUI/GUI.cpp:365 #, possible-boost-format msgid "" "Configuration file \"%1%\" was loaded, however some configuration values " "were not recognized." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:266 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:267 msgid "Developed by Prusa Research." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:269 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:270 msgid "Artwork model by M Boyer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:411 #, possible-boost-format msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " "(according to XDG Base Directory Specification) to \n" "%2%.\n" "\n" "This directory did not exist yet (maybe you run the new version for the " "first time).\n" "However, an old %1% configuration directory was detected in \n" "%3%.\n" "\n" "Consider moving the contents of the old directory to the new location in " "order to access your profiles, etc.\n" "Note that if you decide to downgrade %1% in future, it will use the old " "location again.\n" "\n" "What do you want to do now?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:419 #, possible-c-format, possible-boost-format msgid "%s - BREAKING CHANGE" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:421 msgid "Quit, I will move my data now" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:421 msgid "Start the application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:698 #, possible-c-format, possible-boost-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:701 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:705 msgid "" "PrusaSlicer has encountered a localization error. Please report to " "PrusaSlicer team, what language was active and in which scenario this issue " "happened. Thank you.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:708 msgid "Critical error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:713 #, possible-boost-format msgid "Internal error: %1%" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:954 #, possible-boost-format msgid "You are opening %1% version %2%." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:957 #, possible-boost-format msgid "" "The active configuration was created by %1% %2%,\n" "while a newer configuration was found in %3%\n" "created by %1% %4%.\n" "\n" "Shall the newer configuration be imported?\n" "If so, your active configuration will be backed up before importing the new " "configuration." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:965 #, possible-boost-format msgid "" "An existing configuration was found in %3%\n" "created by %1% %2%.\n" "\n" "Shall this configuration be imported?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:973 msgid "Import" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:974 msgid "Don't import" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:982 msgid "Continue and import newer configuration?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1043 msgid "" "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n" "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM " "available in the system.\n" "Please download and install a 64 bit build of PrusaSlicer from https://www." "prusa3d.cz/prusaslicer/.\n" "Do you wish to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1126 #, possible-c-format, possible-boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3068 #: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1170 msgid "Loading configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1203 #, possible-boost-format msgid "New release version %1% is available." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1204 msgid "See Download page." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1218 #, possible-boost-format msgid "New prerelease version %1% is available." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1219 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1256 msgid "Preparing settings tabs" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287 msgid "Restore window position on start" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1329 msgid "PrusaSlicer started after a crash" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1330 #, possible-boost-format msgid "" "PrusaSlicer crashed last time when attempting to set window position.\n" "We are sorry for the inconvenience, it unfortunately happens with certain " "multiple-monitor setups.\n" "More precise reason for the crash: \"%1%\".\n" "For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n" "\n" "To avoid this problem, consider disabling \"%4%\" in \"Preferences\". " "Otherwise, the application will most likely crash again next time." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1342 #, possible-boost-format msgid "Disable \"%1%\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1343 #, possible-boost-format msgid "Leave \"%1%\" enabled" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1656 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1660 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" "Settings will be available in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1662 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1666 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1679 src/slic3r/GUI/GUI_App.cpp:1690 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1693 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1698 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1836 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1848 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1860 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1871 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2010 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2010 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2159 msgid "modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2213 #, possible-c-format, possible-boost-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2217 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2217 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2218 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2218 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2219 msgid "Check for Configuration Updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2219 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2226 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2232 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2237 src/slic3r/GUI/wxExtensions.cpp:707 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2237 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2239 src/slic3r/GUI/wxExtensions.cpp:709 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2239 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2240 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2245 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2245 #, possible-c-format, possible-boost-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2248 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2251 msgid "Flash Printer &Firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2251 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2271 msgid "Taking a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2272 msgid "" "Some presets are modified and the unsaved changes will not be captured by " "the configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2273 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2289 msgid "Loading a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2298 #, possible-boost-format msgid "Continue to activate a configuration snapshot %1%?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2312 msgid "Failed to activate configuration snapshot." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2331 msgid "Restart application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2365 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2368 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2370 src/slic3r/GUI/Preferences.cpp:582 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2397 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2514 src/slic3r/GUI/GUI_App.cpp:2575 msgid "The preset modifications are successfully saved" msgid_plural "The presets modifications are successfully saved" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_App.cpp:2578 msgid "For new project all modifications will be reseted" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2616 msgid "Loading a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2619 msgid "Project is loading" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2619 msgid "Opening new project while some presets are unsaved." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2638 msgid "The uploads are still ongoing" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2638 msgid "Stop them and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2642 msgid "Ongoing uploads" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2848 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2849 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224 #: src/slic3r/GUI/Plater.cpp:2427 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2873 msgid "Configuration is editing from ConfigWizard" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:2898 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3067 src/slic3r/GUI/GUI_App.cpp:3090 msgid "Open hyperlink in default browser?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3067 src/slic3r/GUI/GUI_App.cpp:3090 msgid "PrusaSlicer: Open hyperlink" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3072 src/slic3r/GUI/Preferences.cpp:382 msgid "Suppress to open hyperlink in browser" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Plater.cpp:1734 msgid "PrusaSlicer will remember your choice." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3075 msgid "You will not be asked about it again on hyperlinks hovering." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1738 #, possible-boost-format msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to changes your choice." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1740 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:905 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:57 src/slic3r/GUI/GUI_Init.cpp:60 msgid "PrusaSlicer GUI initialization failed" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:60 #, possible-boost-format msgid "Fatal error, exception catched: %1%" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127 #: src/libslic3r/PrintConfig.cpp:264 src/libslic3r/PrintConfig.cpp:381 #: src/libslic3r/PrintConfig.cpp:424 src/libslic3r/PrintConfig.cpp:433 #: src/libslic3r/PrintConfig.cpp:685 src/libslic3r/PrintConfig.cpp:752 #: src/libslic3r/PrintConfig.cpp:760 src/libslic3r/PrintConfig.cpp:1209 #: src/libslic3r/PrintConfig.cpp:1296 src/libslic3r/PrintConfig.cpp:1521 #: src/libslic3r/PrintConfig.cpp:1913 src/libslic3r/PrintConfig.cpp:1980 #: src/libslic3r/PrintConfig.cpp:2214 src/libslic3r/PrintConfig.cpp:2800 #: src/libslic3r/PrintConfig.cpp:2808 src/libslic3r/PrintConfig.cpp:2868 #: src/libslic3r/PrintConfig.cpp:2877 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131 #: src/slic3r/GUI/GUI_Preview.cpp:249 src/slic3r/GUI/Tab.cpp:1550 #: src/slic3r/GUI/Tab.cpp:1552 src/libslic3r/ExtrusionEntity.cpp:328 #: src/libslic3r/ExtrusionEntity.cpp:360 src/libslic3r/PrintConfig.cpp:647 #: src/libslic3r/PrintConfig.cpp:2045 src/libslic3r/PrintConfig.cpp:2054 #: src/libslic3r/PrintConfig.cpp:2063 src/libslic3r/PrintConfig.cpp:2073 #: src/libslic3r/PrintConfig.cpp:2082 src/libslic3r/PrintConfig.cpp:2504 #: src/libslic3r/PrintConfig.cpp:2510 src/libslic3r/PrintConfig.cpp:2518 #: src/libslic3r/PrintConfig.cpp:2531 src/libslic3r/PrintConfig.cpp:2541 #: src/libslic3r/PrintConfig.cpp:2549 src/libslic3r/PrintConfig.cpp:2567 #: src/libslic3r/PrintConfig.cpp:2584 src/libslic3r/PrintConfig.cpp:2605 #: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2635 #: src/libslic3r/PrintConfig.cpp:2653 src/libslic3r/PrintConfig.cpp:2668 #: src/libslic3r/PrintConfig.cpp:2678 src/libslic3r/PrintConfig.cpp:2687 #: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2712 #: src/libslic3r/PrintConfig.cpp:2728 src/libslic3r/PrintConfig.cpp:2736 #: src/libslic3r/PrintConfig.cpp:2737 src/libslic3r/PrintConfig.cpp:2746 #: src/libslic3r/PrintConfig.cpp:2760 src/libslic3r/PrintConfig.cpp:2768 #: src/libslic3r/PrintConfig.cpp:2782 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135 #: src/libslic3r/PrintConfig.cpp:3004 src/libslic3r/PrintConfig.cpp:3012 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:65 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/GUI_Preview.cpp:245 #: src/slic3r/GUI/Tab.cpp:1516 src/libslic3r/ExtrusionEntity.cpp:324 #: src/libslic3r/ExtrusionEntity.cpp:352 src/libslic3r/PrintConfig.cpp:1537 #: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1557 #: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1575 #: src/libslic3r/PrintConfig.cpp:1577 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1260 #: src/libslic3r/PrintConfig.cpp:1261 src/libslic3r/PrintConfig.cpp:1276 #: src/libslic3r/PrintConfig.cpp:1286 msgid "Fuzzy Skin" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/GUI_Preview.cpp:220 #: src/slic3r/GUI/Tab.cpp:1584 src/libslic3r/PrintConfig.cpp:484 #: src/libslic3r/PrintConfig.cpp:740 src/libslic3r/PrintConfig.cpp:1303 #: src/libslic3r/PrintConfig.cpp:1494 src/libslic3r/PrintConfig.cpp:1576 #: src/libslic3r/PrintConfig.cpp:1970 src/libslic3r/PrintConfig.cpp:2302 #: src/libslic3r/PrintConfig.cpp:2355 src/libslic3r/PrintConfig.cpp:2853 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1623 #: src/slic3r/GUI/Tab.cpp:2296 src/libslic3r/PrintConfig.cpp:770 #: src/libslic3r/PrintConfig.cpp:1447 src/libslic3r/PrintConfig.cpp:1947 #: src/libslic3r/PrintConfig.cpp:2323 src/libslic3r/PrintConfig.cpp:2597 #: src/libslic3r/PrintConfig.cpp:2625 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:728 #: src/libslic3r/PrintConfig.cpp:838 src/libslic3r/PrintConfig.cpp:1195 #: src/libslic3r/PrintConfig.cpp:1455 src/libslic3r/PrintConfig.cpp:1956 #: src/libslic3r/PrintConfig.cpp:2343 src/libslic3r/PrintConfig.cpp:2606 #: src/libslic3r/PrintConfig.cpp:2840 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1536 #: src/libslic3r/PrintConfig.cpp:494 src/libslic3r/PrintConfig.cpp:505 #: src/libslic3r/PrintConfig.cpp:521 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023 #: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4661 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480 #: src/libslic3r/PrintConfig.cpp:2490 src/libslic3r/PrintConfig.cpp:3028 #: src/libslic3r/PrintConfig.cpp:3224 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428 #: src/slic3r/GUI/Tab.cpp:4595 src/slic3r/GUI/Tab.cpp:4596 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463 #: src/libslic3r/PrintConfig.cpp:3500 src/libslic3r/PrintConfig.cpp:3507 #: src/libslic3r/PrintConfig.cpp:3518 src/libslic3r/PrintConfig.cpp:3528 #: src/libslic3r/PrintConfig.cpp:3537 src/libslic3r/PrintConfig.cpp:3550 #: src/libslic3r/PrintConfig.cpp:3560 src/libslic3r/PrintConfig.cpp:3569 #: src/libslic3r/PrintConfig.cpp:3579 src/libslic3r/PrintConfig.cpp:3590 #: src/libslic3r/PrintConfig.cpp:3598 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574 #: src/slic3r/GUI/Tab.cpp:4636 src/slic3r/GUI/Tab.cpp:4637 #: src/slic3r/GUI/Tab.cpp:4709 src/libslic3r/PrintConfig.cpp:3606 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681 #: src/libslic3r/PrintConfig.cpp:3688 src/libslic3r/PrintConfig.cpp:3695 #: src/libslic3r/PrintConfig.cpp:3706 src/libslic3r/PrintConfig.cpp:3715 #: src/libslic3r/PrintConfig.cpp:3724 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4654 #: src/slic3r/GUI/Tab.cpp:4655 src/libslic3r/SLA/Hollowing.cpp:72 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751 #: src/libslic3r/PrintConfig.cpp:3760 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:160 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:161 msgid "Add negative volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:162 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:163 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:164 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:300 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:407 src/slic3r/GUI/GUI_Factories.cpp:412 #: src/slic3r/GUI/GUI_Factories.cpp:556 src/slic3r/GUI/GUI_Factories.cpp:562 #, possible-c-format, possible-boost-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:444 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:456 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 src/slic3r/GUI/GUI_Factories.cpp:501 #: src/slic3r/GUI/GUI_Factories.cpp:505 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:461 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:471 msgid "Gallery" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:488 src/slic3r/GUI/GUI_Factories.cpp:526 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:535 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:626 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:636 src/slic3r/GUI/GUI_Factories.cpp:648 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:648 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:658 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:686 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:696 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:715 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:726 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534 msgid "Replace with STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:733 msgid "Replace the selected volume with new STL" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:740 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:778 src/slic3r/Utils/Repetier.cpp:126 #: src/slic3r/Utils/Repetier.cpp:209 src/libslic3r/PrintConfig.cpp:612 #: src/libslic3r/PrintConfig.cpp:2720 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:795 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:795 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607 msgid "Convert from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607 msgid "Revert conversion from meters" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:859 src/slic3r/GUI/GUI_ObjectList.cpp:2133 #: src/libslic3r/PrintConfig.cpp:4371 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:859 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:878 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:878 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:880 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:880 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:882 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:882 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:885 msgid "Mirror" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:885 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:901 src/slic3r/GUI/GUI_ObjectList.cpp:1696 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:937 msgid "To objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:937 src/slic3r/GUI/GUI_Factories.cpp:954 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:940 msgid "To parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:940 src/slic3r/GUI/GUI_Factories.cpp:975 msgid "Split the selected object into individual parts" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:944 src/slic3r/GUI/GUI_Factories.cpp:954 #: src/slic3r/GUI/GUI_Factories.cpp:975 src/libslic3r/PrintConfig.cpp:4400 msgid "Split" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:944 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1084 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1087 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1090 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1090 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1094 msgid "Fill bed with instances" msgstr "" #: src/slic3r/GUI/GUI_Factories.cpp:1094 msgid "Fill the remaining area of bed with instances of the selected object" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:160 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:164 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:297 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:139 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:480 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:400 msgid "No errors detected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:409 #, possible-c-format, possible-boost-format msgid "Auto-repaired %1$d error" msgid_plural "Auto-repaired %1$d errors" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:415 #, possible-c-format, possible-boost-format msgid "%1$d degenerate facet" msgid_plural "%1$d degenerate facets" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:417 #, possible-c-format, possible-boost-format msgid "%1$d edge fixed" msgid_plural "%1$d edges fixed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:419 #, possible-c-format, possible-boost-format msgid "%1$d facet removed" msgid_plural "%1$d facets removed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:421 #, possible-c-format, possible-boost-format msgid "%1$d facet reversed" msgid_plural "%1$d facets reversed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:423 #, possible-c-format, possible-boost-format msgid "%1$d backward edge" msgid_plural "%1$d backward edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:426 src/slic3r/GUI/GUI_ObjectList.cpp:429 #, possible-c-format, possible-boost-format msgid "%1$d open edge" msgid_plural "%1$d open edges" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:428 msgid "Remaining errors" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:436 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:482 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:484 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:488 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:490 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:616 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:631 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:631 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1242 #: src/slic3r/GUI/GUI_ObjectList.cpp:3997 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1248 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1248 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1298 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1299 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1300 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1339 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1340 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1341 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1413 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1413 msgid "Load Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1509 src/slic3r/GUI/Plater.cpp:2379 msgid "Loading" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399 msgid "Loading file" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1548 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1638 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1663 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1727 msgid "Add Shape from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1727 msgid "Add Shapes from Gallery" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1830 msgid "Remove paint-on supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1837 msgid "Remove paint-on seam" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1844 msgid "Remove Multi Material painting" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1850 msgid "Shift objects to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1856 msgid "Remove variable layer height" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1877 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1901 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1917 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1949 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1953 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1976 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1980 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2004 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2008 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2140 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2228 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2260 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2429 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2444 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2477 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2481 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2486 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2492 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2498 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2505 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2505 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2741 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2934 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3010 #: src/slic3r/GUI/GUI_ObjectList.cpp:3038 #: src/slic3r/GUI/GUI_ObjectList.cpp:3058 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3104 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3108 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3113 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3172 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3491 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3503 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3640 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3641 #: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3641 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3643 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3644 #, possible-c-format, possible-boost-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3645 #, possible-c-format, possible-boost-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3648 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3653 #: src/slic3r/GUI/GUI_ObjectList.cpp:3728 src/slic3r/GUI/Plater.cpp:181 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3775 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Negative Volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3780 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3781 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3786 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4019 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4019 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4082 msgid "Repairing model" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4111 msgid "Fix through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4114 msgid "Fixing through NetFabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4144 msgid "The following model was repaired successfully" msgid_plural "The following models were repaired successfully" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4150 msgid "Folowing model repair failed" msgid_plural "Folowing models repair failed" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4155 msgid "Repairing was canceled" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4267 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4407 msgid "Set Printable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4407 msgid "Set Unprintable group" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4409 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4409 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4410 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4410 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:55 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:56 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:85 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:141 src/libslic3r/GCode.cpp:540 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:521 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522 #: src/slic3r/GUI/Mouse3DController.cpp:478 #: src/slic3r/GUI/Mouse3DController.cpp:499 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:250 #, possible-c-format, possible-boost-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:336 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:348 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:398 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:400 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414 msgid "Inches" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:523 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:577 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:820 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:852 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:931 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:980 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:983 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:63 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:99 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:105 #, possible-c-format, possible-boost-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:152 #, possible-c-format, possible-boost-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:211 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:218 src/libslic3r/PrintConfig.cpp:782 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:219 src/libslic3r/PrintConfig.cpp:2982 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/Tab.cpp:2008 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:222 src/slic3r/GUI/Tab.cpp:1983 msgid "Temperature" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:223 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:228 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:254 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:318 #: src/libslic3r/ExtrusionEntity.cpp:340 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:319 #: src/libslic3r/ExtrusionEntity.cpp:342 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:320 #: src/libslic3r/ExtrusionEntity.cpp:344 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:321 #: src/libslic3r/ExtrusionEntity.cpp:346 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:322 #: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:2342 #: src/libslic3r/PrintConfig.cpp:2354 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:323 #: src/libslic3r/ExtrusionEntity.cpp:350 src/libslic3r/PrintConfig.cpp:2839 #: src/libslic3r/PrintConfig.cpp:2852 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:325 #: src/libslic3r/ExtrusionEntity.cpp:354 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:326 #: src/libslic3r/ExtrusionEntity.cpp:356 src/libslic3r/PrintConfig.cpp:1302 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:248 src/libslic3r/ExtrusionEntity.cpp:327 #: src/libslic3r/ExtrusionEntity.cpp:358 msgid "Skirt/Brim" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:250 src/libslic3r/ExtrusionEntity.cpp:329 #: src/libslic3r/ExtrusionEntity.cpp:362 src/libslic3r/PrintConfig.cpp:2686 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:251 src/slic3r/GUI/Tab.cpp:1634 #: src/libslic3r/ExtrusionEntity.cpp:330 src/libslic3r/ExtrusionEntity.cpp:364 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:728 msgid "NOTE:" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:729 #, possible-boost-format msgid "Sliced object \"%1%\" looks like a logo or a sign" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:730 msgid "Apply color change automatically" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1058 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1059 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1060 msgid "Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:767 #: src/slic3r/GUI/HintNotification.cpp:793 #: src/slic3r/GUI/NotificationManager.cpp:374 #: src/slic3r/GUI/NotificationManager.cpp:391 msgid "More" msgstr "" #: src/slic3r/GUI/HintNotification.cpp:908 msgid "Open Preferences." msgstr "" #: src/slic3r/GUI/HintNotification.cpp:1000 msgid "Open Documentation in web browser." msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:527 msgid "Edit" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:960 src/slic3r/GUI/Search.cpp:479 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:961 src/slic3r/GUI/Search.cpp:472 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:963 src/slic3r/GUI/Search.cpp:474 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:171 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:180 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:205 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:250 #, possible-c-format, possible-boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single " "bed:\n" "%s" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:123 msgid "Filling bed" msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:134 msgid "Bed filling canceled." msgstr "" #: src/slic3r/GUI/Jobs/FillBedJob.cpp:135 msgid "Bed filling done." msgstr "" #: src/slic3r/GUI/Jobs/Job.cpp:111 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Jobs/PlaterJob.cpp:13 msgid "An unexpected error occured" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:21 msgid "Best surface quality" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:23 msgid "Optimize object rotation for best surface quality." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24 msgid "Reduced overhang slopes" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:26 msgid "" "Optimize object rotation to have minimum amount of overhangs needing support " "structures.\n" "Note that this method will try to find the best surface of the object for " "touching the print bed if no elevation is set." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:30 msgid "Lowest Z height" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:32 msgid "Rotate the model to have the lowest z height for faster print time." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:59 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:77 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:78 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:36 msgid "Choose SLA archive:" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:40 msgid "Import file" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47 msgid "Import model and profile" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48 msgid "Import profile only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49 msgid "Import model only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60 msgid "Accurate" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61 msgid "Balanced" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:62 msgid "Quick" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:140 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:158 msgid "" "The SLA archive doesn't contain any presets. Please activate some SLA " "printer preset first before importing that SLA archive." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:164 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:165 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 msgid "" "The imported SLA archive did not contain any presets. The current SLA " "presets were used as fallback." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428 msgid "Attention!" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1100 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:77 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:78 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:79 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:80 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:81 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:83 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:84 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:85 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912 #: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:89 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:90 src/slic3r/GUI/Plater.cpp:895 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:91 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:93 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:94 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:95 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:99 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:100 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:102 #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:110 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 #: src/slic3r/GUI/PrintHostDialogs.cpp:217 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/MainFrame.cpp:75 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:46 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 #: src/slic3r/GUI/KBShortcutsDialog.cpp:248 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Gizmo FDM paint-on supports" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Gizmo FDM paint-on seam" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Gizmo Multi Material painting" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Minimize application" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:181 src/slic3r/GUI/MainFrame.cpp:284 #: src/slic3r/GUI/MainFrame.cpp:333 src/slic3r/GUI/MainFrame.cpp:445 #: src/slic3r/GUI/MainFrame.cpp:448 src/slic3r/GUI/MainFrame.cpp:470 #: src/slic3r/GUI/MainFrame.cpp:473 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:184 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "Gizmo move: Press to snap by 1mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:186 msgid "Gizmo scale: Press to snap by 5%" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Gizmo scale: Scale selection to fit print volume" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:188 msgid "Gizmo scale: Press to activate one direction scaling" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:189 msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "" "The following shortcuts are applicable when the specified gizmo is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 msgid "Set selected items as Printable/Unprintable" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 msgid "Set default extruder for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 msgid "Set extruder number for the selected items" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:201 msgid "Objects List" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:205 src/slic3r/GUI/MainFrame.cpp:1518 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 src/slic3r/GUI/MainFrame.cpp:1352 #: src/slic3r/GUI/MainFrame.cpp:1356 src/slic3r/GUI/MainFrame.cpp:1523 #: src/slic3r/GUI/MainFrame.cpp:1527 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:217 #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 msgid "Vertical slider - Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Vertical slider - Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 msgid "Horizontal slider - Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 msgid "Horizontal slider - Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 msgid "On/Off one layer mode of the vertical slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 msgid "Show/Hide Legend and Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Show/Hide G-code window" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446 #: src/slic3r/GUI/Tab.cpp:2822 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 msgid "Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 msgid "Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 msgid "Set upper thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 msgid "Set lower thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:238 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 #: src/slic3r/GUI/KBShortcutsDialog.cpp:240 #: src/slic3r/GUI/KBShortcutsDialog.cpp:250 #: src/slic3r/GUI/KBShortcutsDialog.cpp:251 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Vertical Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "" "The following shortcuts are applicable in G-code preview when the vertical " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:248 msgid "Set left thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 msgid "Set right thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "Horizontal Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:254 msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:278 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:75 src/slic3r/GUI/MainFrame.cpp:89 #: src/slic3r/GUI/MainFrame.cpp:1413 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:91 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:1301 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:89 src/slic3r/GUI/MainFrame.cpp:1534 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:91 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:225 msgid "Closing PrusaSlicer. Current project is modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:232 msgid "PrusaSlicer is closing" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:232 msgid "Closing PrusaSlicer while some presets are modified." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335 #: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097 #: src/slic3r/GUI/Tab.hpp:522 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097 #: src/slic3r/GUI/Tab.hpp:448 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341 #: src/slic3r/GUI/Tab.hpp:490 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721 #: src/slic3r/GUI/Plater.cpp:2818 msgid "Untitled" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:655 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1070 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1070 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1072 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1072 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1078 #, possible-c-format, possible-boost-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1079 #, possible-c-format, possible-boost-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1085 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1085 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1087 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1087 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1089 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1089 #, possible-c-format, possible-boost-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1092 src/slic3r/GUI/MainFrame.cpp:1095 #, possible-c-format, possible-boost-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1092 src/slic3r/GUI/MainFrame.cpp:1095 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1097 msgid "Show Tip of the Day" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1097 msgid "" "Opens Tip of the day notification in bottom right corner or shows another " "tip if already opened." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1100 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1114 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1114 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1118 src/libslic3r/PrintConfig.cpp:2867 #: src/libslic3r/PrintConfig.cpp:2876 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1118 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1121 src/libslic3r/PrintConfig.cpp:423 #: src/libslic3r/PrintConfig.cpp:432 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1121 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1123 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1123 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1125 src/libslic3r/PrintConfig.cpp:2224 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1125 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1127 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1127 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1129 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1129 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1142 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1142 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1145 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1145 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1150 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1162 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1187 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1187 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1191 src/slic3r/GUI/MainFrame.cpp:1193 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1191 src/slic3r/GUI/MainFrame.cpp:1193 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1201 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1201 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1205 msgid "Import STL (Imperial Units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1205 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1209 msgid "Import SL1 / SL1S Archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1209 msgid "Load an SL1 / Sl1S archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1214 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1214 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1217 msgid "Import Config from &Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1217 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1221 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1221 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1224 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1227 src/slic3r/GUI/MainFrame.cpp:1579 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1227 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1231 src/slic3r/GUI/MainFrame.cpp:1580 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1231 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1235 msgid "Export G-code to SD Card / Flash Drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1235 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1239 msgid "Export Plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1239 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1242 msgid "Export Plate as STL &Including Supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1242 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1250 src/slic3r/GUI/MainFrame.cpp:1531 msgid "Export &Toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1250 src/slic3r/GUI/MainFrame.cpp:1531 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1254 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1254 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1257 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1257 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1260 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1260 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1263 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1265 msgid "Ejec&t SD Card / Flash Drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1265 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1273 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1273 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1279 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1279 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1285 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1285 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1293 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1293 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1297 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1297 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1301 msgid "&G-code Preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1304 src/slic3r/GUI/MainFrame.cpp:1538 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1304 src/slic3r/GUI/MainFrame.cpp:1538 #, possible-c-format, possible-boost-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1319 msgid "&Select All" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1320 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1322 msgid "D&eselect All" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1323 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1326 msgid "&Delete Selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1327 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1329 msgid "Delete &All" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1330 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1334 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1337 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1342 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1343 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1345 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1346 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1351 src/slic3r/GUI/MainFrame.cpp:1355 #: src/slic3r/GUI/MainFrame.cpp:1522 src/slic3r/GUI/MainFrame.cpp:1526 msgid "Re&load from Disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1361 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1362 msgid "Search in settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1370 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1370 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1375 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1375 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1378 src/slic3r/GUI/MainFrame.cpp:1582 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1378 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1382 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1382 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1388 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1388 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1391 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1391 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1397 msgid "Open the dialog to modify shape gallery" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1409 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1409 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1413 msgid "Open New Instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1417 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562 msgid "Compare Presets" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1417 msgid "Compare presets" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1427 msgid "Show &Labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1427 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1430 msgid "&Collapse Sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1430 src/slic3r/GUI/Plater.cpp:2319 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1435 msgid "&Fullscreen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1435 msgid "Fullscreen" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1450 src/slic3r/GUI/MainFrame.cpp:1553 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1451 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1452 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1453 src/slic3r/GUI/MainFrame.cpp:1554 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1456 src/slic3r/GUI/MainFrame.cpp:1557 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1518 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1534 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1579 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1580 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1582 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1606 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1618 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1625 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1625 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1626 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1661 #, possible-c-format, possible-boost-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1661 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1661 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1673 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295 #: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666 #: src/slic3r/GUI/Tab.cpp:4662 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1684 #, possible-c-format, possible-boost-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1707 #, possible-boost-format msgid "%1% was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1710 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1726 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1736 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1747 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1747 src/libslic3r/PrintConfig.cpp:4376 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1761 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1778 msgid "Loading of a configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1780 src/slic3r/GUI/MainFrame.cpp:1845 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1809 msgid "Exporting configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1810 msgid "" "Some presets are modified and the unsaved changes will not be exported into " "configuration bundle." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1819 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1842 msgid "Loading of a configuration bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1872 #, possible-c-format, possible-boost-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:453 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:464 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:469 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:472 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:484 #: src/slic3r/GUI/Mouse3DController.cpp:493 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:490 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:505 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:508 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:212 #, possible-c-format, possible-boost-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:213 #, possible-c-format, possible-boost-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:232 #, possible-c-format, possible-boost-format msgid "%s warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:233 #, possible-c-format, possible-boost-format msgid "%s has a warning" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:246 src/slic3r/GUI/MsgDialog.cpp:259 #, possible-c-format, possible-boost-format msgid "%s info" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:287 #, possible-c-format, possible-boost-format msgid "%s information" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:752 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:753 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:753 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:761 msgid "" "You have just added a G-code for color change, but its value is empty.\n" "To export the G-code correctly, check the \"Color Change G-code\" in " "\"Printer Settings > Custom G-code\"" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:764 msgid "" "No color change event was added to the print. The print does not look like a " "sign." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:766 msgid "Desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:768 msgid "Desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:770 msgid "Undo desktop integration was successful." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:772 msgid "Undo desktop integration failed." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:773 msgid "Exporting." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:664 msgid "Open Folder." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:701 msgid "Eject drive" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:885 msgid "ERROR" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:890 msgid "CANCELED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:895 msgid "COMPLETED" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:937 msgid "Cancel upload" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:996 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with custom supports." msgid_plural "%1$d objects were loaded with custom supports." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:997 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with custom seam." msgid_plural "%1$d objects were loaded with custom seam." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:998 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with multimaterial painting." msgid_plural "%1$d objects were loaded with multimaterial painting." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:999 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with variable layer height." msgid_plural "%1$d objects were loaded with variable layer height." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1000 #, possible-c-format, possible-boost-format msgid "%1$d object was loaded with partial sinking." msgid_plural "%1$d objects were loaded with partial sinking." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/NotificationManager.cpp:1113 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1113 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1113 msgid "Export." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1447 #: src/slic3r/GUI/NotificationManager.cpp:1454 #: src/slic3r/GUI/NotificationManager.cpp:1470 #: src/slic3r/GUI/NotificationManager.cpp:1476 #: src/slic3r/GUI/NotificationManager.cpp:1547 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1459 #: src/slic3r/GUI/NotificationManager.cpp:1486 #: src/slic3r/GUI/NotificationManager.cpp:1494 #: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1598 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:50 msgid "Paint-on seam" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:52 msgid "Sinking" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:94 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:98 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266 #, possible-c-format, possible-boost-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4500 #: src/slic3r/GUI/Tab.cpp:4591 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:134 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:257 #, possible-c-format, possible-boost-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:260 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:263 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw-renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:273 #, possible-c-format, possible-boost-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:274 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:352 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:352 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:83 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Descriptive name for the printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2247 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:268 msgid "Connection to printers connected via the print host failed." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:310 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:315 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337 msgid "Refresh Printers" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:374 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:404 #: src/libslic3r/PrintConfig.cpp:307 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:405 #, possible-c-format, possible-boost-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:406 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:630 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:634 msgid "You should change the name of your printer device." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:642 #, possible-boost-format msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:643 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:670 #, possible-boost-format msgid "" "Following printer preset is duplicated:%1%The above preset for printer \"%2%" "\" will be used just once." msgid_plural "" "Following printer presets are duplicated:%1%The above presets for printer " "\"%2%\" will be used just once." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:720 msgid "It's not possible to delete the last related preset for the printer." msgstr "" #: src/slic3r/GUI/Plater.cpp:141 msgid "The provided name is not valid;" msgstr "" #: src/slic3r/GUI/Plater.cpp:142 src/slic3r/GUI/SavePresetDialog.cpp:102 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/Plater.cpp:207 msgid "" "For a multipart object, this value isn't accurate.\n" "It doesn't take account of intersections and negative volumes." msgstr "" #: src/slic3r/GUI/Plater.cpp:211 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:213 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:276 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:296 src/slic3r/GUI/Plater.cpp:1376 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:297 src/slic3r/GUI/Plater.cpp:1357 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:298 src/slic3r/GUI/Plater.cpp:1369 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:299 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:300 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:301 src/slic3r/GUI/Plater.cpp:1339 #: src/slic3r/GUI/Plater.cpp:1426 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:302 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:431 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:433 src/libslic3r/PrintConfig.cpp:2540 #: src/libslic3r/PrintConfig.cpp:3499 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:434 src/slic3r/GUI/Plater.cpp:563 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:435 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:467 src/slic3r/GUI/Tab.cpp:1545 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:469 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:477 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:577 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:579 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:580 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295 #: src/slic3r/GUI/Plater.cpp:6014 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:1086 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1286 #, possible-boost-format msgid "%1% (%2$d shell)" msgid_plural "%1% (%2$d shells)" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1314 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1317 msgid "object" msgid_plural "objects" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:1317 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1357 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1359 src/slic3r/GUI/Plater.cpp:1412 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1359 src/slic3r/GUI/Plater.cpp:1412 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1369 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1395 #, possible-boost-format msgid "Filament at extruder %1%" msgstr "" #: src/slic3r/GUI/Plater.cpp:1401 msgid "(including spool)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1410 src/libslic3r/PrintConfig.cpp:1045 #: src/libslic3r/PrintConfig.cpp:3293 src/libslic3r/PrintConfig.cpp:3294 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1428 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1435 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1672 msgid "Fill bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:1678 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:1684 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:1727 #, possible-boost-format msgid "Do you want to save the changes to \"%1%\"?" msgstr "" #: src/slic3r/GUI/Plater.cpp:1732 src/slic3r/GUI/Preferences.cpp:222 msgid "Ask for unsaved changes in project" msgstr "" #: src/slic3r/GUI/Plater.cpp:1735 msgid "" "You will not be asked about it again, when: \n" "- Closing PrusaSlicer,\n" "- Loading or creating a new project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2197 #, possible-c-format, possible-boost-format msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2202 #, possible-c-format, possible-boost-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2318 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2486 msgid "" "The preset below was temporarily installed on the active instance of " "PrusaSlicer" msgid_plural "" "The presets below were temporarily installed on the active instance of " "PrusaSlicer" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2516 #, possible-boost-format msgid "Failed loading file \"%1%\" due to an invalid configuration." msgstr "" #: src/slic3r/GUI/Plater.cpp:2536 #, possible-c-format, possible-boost-format msgid "" "Object size from file %s appears to be zero.\n" "This object has been removed from the model" msgid_plural "" "Objects size from file %s appears to be zero.\n" "These objects have been removed from the model" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2540 msgid "The size of the object is zero" msgstr "" #: src/slic3r/GUI/Plater.cpp:2553 #, possible-c-format, possible-boost-format msgid "" "The dimensions of the object from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in meters.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579 msgid "The object is too small" msgstr "" #: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580 msgid "Apply to all the remaining small objects being loaded." msgstr "" #: src/slic3r/GUI/Plater.cpp:2575 #, possible-c-format, possible-boost-format msgid "" "The dimensions of the object from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of the object?" msgid_plural "" "The dimensions of some objects from file %s seem to be defined in inches.\n" "The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate " "the dimensions of these objects?" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Plater.cpp:2593 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2604 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2605 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2625 #, possible-c-format, possible-boost-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2648 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2767 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2768 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2846 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2853 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2859 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2865 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2963 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2975 msgid "Delete All Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3003 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:3086 msgid "" "The selected object couldn't be split because it contains only one solid " "part." msgstr "" #: src/slic3r/GUI/Plater.cpp:3093 msgid "All non-solid parts (modifiers) were deleted" msgstr "" #: src/slic3r/GUI/Plater.cpp:3095 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3145 msgid "" "An object has custom support enforcers which will not be used because " "supports are disabled." msgstr "" #: src/slic3r/GUI/Plater.cpp:3147 msgid "Enable supports for enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:3346 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3432 msgid "Replace from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3450 msgid "Unable to replace with more than one volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529 msgid "Error during replace" msgstr "" #: src/slic3r/GUI/Plater.cpp:3521 msgid "Select the new file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3529 msgid "File for the replace wasn't selected" msgstr "" #: src/slic3r/GUI/Plater.cpp:3620 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202 msgid "The selected file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3652 msgid "differs from the original file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3652 msgid "Do you want to replace it" msgstr "" #: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3778 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3783 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3801 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:4096 msgid "There are active warnings concerning sliced models:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4107 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:4438 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4859 msgid "Undo / Redo is processing" msgstr "" #: src/slic3r/GUI/Plater.cpp:4861 #, possible-boost-format msgid "" "Switching the printer technology from %1% to %2%.\n" "Some %1% presets were modified, which will be lost after switching the " "printer technology." msgstr "" #: src/slic3r/GUI/Plater.cpp:5058 msgid "Creating a new project while the current project is modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:5061 msgid "Creating a new project while some presets are modified." msgstr "" #: src/slic3r/GUI/Plater.cpp:5062 msgid "You can keep presets modifications to the new project or discard them" msgstr "" #: src/slic3r/GUI/Plater.cpp:5063 msgid "" "You can keep presets modifications to the new project, discard them or save " "changes as new presets.\n" "Note, if changes will be saved then new project wouldn't keep them" msgstr "" #: src/slic3r/GUI/Plater.cpp:5069 msgid "Creating a new project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5100 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5130 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5202 msgid "does not contain valid gcode." msgstr "" #: src/slic3r/GUI/Plater.cpp:5203 msgid "Error while loading .gcode file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5256 #, possible-c-format, possible-boost-format msgid "%s - Drop project file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5263 msgid "Open as project" msgstr "" #: src/slic3r/GUI/Plater.cpp:5264 msgid "Import geometry only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5265 msgid "Import config only" msgstr "" #: src/slic3r/GUI/Plater.cpp:5268 msgid "Select an action to apply to the file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5273 msgid "Action" msgstr "" #: src/slic3r/GUI/Plater.cpp:5289 msgid "Don't show again" msgstr "" #: src/slic3r/GUI/Plater.cpp:5330 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:5331 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5408 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:5413 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:5463 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5474 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5483 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5517 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5568 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5569 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5573 #, possible-c-format, possible-boost-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:5647 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:5707 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5707 msgid "Save SL1 / SL1S file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5716 msgid "The provided file name is not valid." msgstr "" #: src/slic3r/GUI/Plater.cpp:5717 msgid "The following characters are not allowed by a FAT file system:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5904 msgid "" "The plater is empty.\n" "Do you want to save the project?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5904 msgid "Save project" msgstr "" #: src/slic3r/GUI/Plater.cpp:6492 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:6526 msgid "" "Custom supports, seams and multimaterial painting were removed after " "repairing the mesh." msgstr "" #: src/slic3r/GUI/Plater.cpp:6640 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:121 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:123 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:129 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:131 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:137 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:139 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:148 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:150 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:159 msgid "If enabled, sets PrusaSlicer as default application to open .3mf files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:166 msgid "If enabled, sets PrusaSlicer as default application to open .stl files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:177 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:182 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:184 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:190 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:192 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:200 msgid "Show drop project dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:202 msgid "" "When checked, whenever dragging and dropping a project file on the " "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" #: src/slic3r/GUI/Preferences.cpp:208 src/slic3r/GUI/Preferences.cpp:212 msgid "Allow just a single PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/Preferences.cpp:210 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:214 msgid "" "If this is enabled, when starting PrusaSlicer and another instance of the " "same PrusaSlicer is already running, that instance will be reactivated " "instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:224 msgid "" "Always ask for unsaved changes in project, when: \n" "- Closing PrusaSlicer,\n" "- Loading or creating a new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:233 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:896 msgid "" "Ask to save unsaved changes in presets when closing the application or when " "loading a new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:235 msgid "" "Always ask for unsaved changes in presets, when: \n" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" #: src/slic3r/GUI/Preferences.cpp:242 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:895 msgid "Ask for unsaved changes in presets when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:244 msgid "" "Always ask for unsaved changes in presets when selecting new preset or " "resetting a preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:249 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:894 msgid "Ask for unsaved changes in presets when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:251 msgid "Always ask for unsaved changes in presets when creating new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:258 msgid "Associate .gcode files to PrusaSlicer G-code Viewer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:260 msgid "" "If enabled, sets PrusaSlicer G-code Viewer as default application to open ." "gcode files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:268 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:270 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:280 src/slic3r/GUI/Preferences.cpp:282 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:289 msgid "If enabled, PrusaSlicer will be open at the position it was closed" msgstr "" #: src/slic3r/GUI/Preferences.cpp:295 msgid "Clear Undo / Redo stack on new project" msgstr "" #: src/slic3r/GUI/Preferences.cpp:297 msgid "" "Clear Undo / Redo stack on new project or when an existing project is loaded." msgstr "" #: src/slic3r/GUI/Preferences.cpp:303 msgid "Enable support for legacy 3DConnexion devices" msgstr "" #: src/slic3r/GUI/Preferences.cpp:305 msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" #: src/slic3r/GUI/Preferences.cpp:314 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:319 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:321 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:326 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:328 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:333 msgid "Reverse direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:335 msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:343 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:366 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:368 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer. If disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:375 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:377 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:384 msgid "If enabled, PrusaSlicer will not open hyperlinks in your browser." msgstr "" #: src/slic3r/GUI/Preferences.cpp:391 msgid "Use colors for axes values in Manipulation panel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:393 msgid "" "If enabled, the axes names and axes values will be colorized according to " "the axes colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:399 msgid "Order object volumes by types" msgstr "" #: src/slic3r/GUI/Preferences.cpp:401 msgid "" "If enabled, volumes will be always ordered inside the object. Correct order " "is Model Part, Negative Volume, Modifier, Support Blocker and Support " "Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " "Modifiers. But one of the model parts have to be on the first place." msgstr "" #: src/slic3r/GUI/Preferences.cpp:408 msgid "Set settings tabs as menu items (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:410 msgid "" "If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " "will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:419 msgid "Show \"Tip of the day\" notification after start" msgstr "" #: src/slic3r/GUI/Preferences.cpp:421 msgid "If enabled, useful hints are displayed at startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:427 msgid "Notify about new releases" msgstr "" #: src/slic3r/GUI/Preferences.cpp:429 msgid "" "You will be notified about new release after startup acordingly: All = " "Regular release and alpha / beta releases. Release only = regular release." msgstr "" #: src/slic3r/GUI/Preferences.cpp:435 msgid "Release only" msgstr "" #: src/slic3r/GUI/Preferences.cpp:444 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:446 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:471 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:476 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:478 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:491 msgid "Dark mode (experimental)" msgstr "" #: src/slic3r/GUI/Preferences.cpp:496 msgid "Enable dark mode" msgstr "" #: src/slic3r/GUI/Preferences.cpp:498 msgid "" "If enabled, UI will use Dark mode colors. If disabled, old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:507 msgid "Use system menu for application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:509 msgid "" "If enabled, application will use the standard Windows system menu,\n" "but on some combination of display scales it can looks ugly. If disabled, " "old UI will be used." msgstr "" #: src/slic3r/GUI/Preferences.cpp:578 msgid "Changes for the critical options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:580 msgid "" "Changing some options will trigger application restart.\n" "You will lose the content of the plater." msgstr "" #: src/slic3r/GUI/Preferences.cpp:694 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:709 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:743 src/slic3r/GUI/Preferences.cpp:754 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:744 msgid "New layout, access via settings button in the top menu" msgstr "" #: src/slic3r/GUI/Preferences.cpp:745 src/slic3r/GUI/Preferences.cpp:755 msgid "Settings in non-modal window" msgstr "" #: src/slic3r/GUI/Preferences.cpp:763 msgid "Layout Options" msgstr "" #: src/slic3r/GUI/Preferences.cpp:806 msgid "Text colors" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:249 #: src/slic3r/GUI/PresetComboBoxes.cpp:287 #: src/slic3r/GUI/PresetComboBoxes.cpp:794 #: src/slic3r/GUI/PresetComboBoxes.cpp:849 #: src/slic3r/GUI/PresetComboBoxes.cpp:989 #: src/slic3r/GUI/PresetComboBoxes.cpp:1033 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:291 #: src/slic3r/GUI/PresetComboBoxes.cpp:853 #: src/slic3r/GUI/PresetComboBoxes.cpp:1037 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:302 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:337 #, possible-boost-format msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:340 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:581 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:697 #: src/slic3r/GUI/PresetComboBoxes.cpp:737 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:702 #: src/slic3r/GUI/PresetComboBoxes.cpp:742 src/slic3r/GUI/Tab.cpp:3241 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:716 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:722 msgid "Change extruder color" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:730 src/slic3r/GUI/Tab.cpp:3241 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:733 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:864 #: src/slic3r/GUI/PresetComboBoxes.cpp:1051 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:888 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:890 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:892 #: src/slic3r/GUI/PresetComboBoxes.cpp:1075 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:32 #, possible-boost-format msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:40 #, possible-boost-format msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:44 #, possible-boost-format msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at " "%2%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:55 #, possible-boost-format msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:57 #, possible-boost-format msgid "During the other layers, fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:57 #, possible-boost-format msgid "Fan will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:59 #, possible-boost-format msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:61 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:64 msgid "During the other layers, fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:64 msgid "Fan will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:170 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:171 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:174 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:176 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:178 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:181 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:183 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:187 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:188 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:192 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:193 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:197 #, possible-c-format, possible-boost-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:215 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:221 #, possible-c-format, possible-boost-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:236 #, possible-c-format, possible-boost-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:240 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:269 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:282 #, possible-boost-format msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:285 #, possible-boost-format msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:288 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:301 #, possible-boost-format msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:304 #, possible-boost-format msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:307 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:40 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:40 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:50 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:59 msgid "Group" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:84 #, possible-c-format, possible-boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:92 msgid "Upload and Print" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:103 msgid "Upload and Simulate" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:115 msgid "Upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:247 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:248 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:249 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:250 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:251 msgctxt "OfFile" msgid "Size" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:252 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:253 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:256 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:258 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:316 #: src/slic3r/GUI/PrintHostDialogs.cpp:371 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:372 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:374 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:375 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:376 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:424 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:29 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:114 #: src/libslic3r/PrintConfig.cpp:929 src/libslic3r/PrintConfig.cpp:973 #: src/libslic3r/PrintConfig.cpp:988 src/libslic3r/PrintConfig.cpp:3160 #: src/libslic3r/PrintConfig.cpp:3169 src/libslic3r/PrintConfig.cpp:3310 #: src/libslic3r/PrintConfig.cpp:3318 src/libslic3r/PrintConfig.cpp:3326 #: src/libslic3r/PrintConfig.cpp:3333 src/libslic3r/PrintConfig.cpp:3341 #: src/libslic3r/PrintConfig.cpp:3349 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:886 #: src/libslic3r/PrintConfig.cpp:1782 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:57 #, possible-c-format, possible-boost-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:101 #: src/slic3r/GUI/SavePresetDialog.cpp:109 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:110 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:116 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:122 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:127 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:134 #, possible-boost-format msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:136 #, possible-boost-format msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " "printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:137 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:142 msgid "The name cannot be empty." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:147 msgid "The name cannot start with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:152 msgid "The name cannot end with space character." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:157 msgid "The name cannot be the same as a preset alias name." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:191 #: src/slic3r/GUI/SavePresetDialog.cpp:197 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:221 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:283 #, possible-boost-format msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:322 #, possible-boost-format msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:325 #, possible-boost-format msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:326 #, possible-boost-format msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:327 #, possible-boost-format msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345 #: src/slic3r/GUI/Tab.cpp:2642 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:345 #: src/slic3r/GUI/Tab.cpp:2636 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:168 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:209 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:241 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:260 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:278 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:297 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:394 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:419 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:950 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:114 msgid "Data to send" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:550 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:618 msgid "Send system info" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:581 #, possible-boost-format msgid "" "This is the first time you are running %1%. We would like to ask you to send " "some of your system information to us. This will only happen once and we " "will not ask you to do this again (only after you upgrade to the next " "version)." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:585 msgid "" "If we know your hardware, operating system, etc., it will greatly help us in " "development and prioritization, because we will be able to focus our effort " "more efficiently and spend time on features that are needed the most." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:588 msgid "Is it safe?" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:590 #, possible-boost-format msgid "" "We do not send any personal information nor anything that would allow us to " "identify you later. To detect duplicate entries, a unique number derived " "from your system is sent, but the source information cannot be " "reconstructed. Apart from that, only general data about your OS, hardware " "and OpenGL installation are sent. PrusaSlicer is open source, if you want to " "inspect the code actually performing the communication, see %1%." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:614 msgid "Show verbatim data that will be sent" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:616 msgid "Ask me next time" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:617 msgid "Do not send anything" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:703 msgid "System info sent successfully. Thank you." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:706 msgid "Sending system info failed!" msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:713 msgid "Sending system info was cancelled." msgstr "" #: src/slic3r/GUI/SendSystemInfoDialog.cpp:720 msgid "Sending system info..." msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:84 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:150 msgid "Blacklisted libraries loaded into PrusaSlicer process:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:162 msgid "Eigen vectorization supported:" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:169 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:114 src/libslic3r/PrintConfig.cpp:542 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:115 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:120 src/libslic3r/PrintConfig.cpp:557 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:121 msgid "Select the print profiles this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:216 msgid "Compare this preset with some another" msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:218 #, possible-c-format, possible-boost-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:219 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:223 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:227 #, possible-boost-format msgid "Search in settings [%1%]" msgstr "" #: src/slic3r/GUI/Tab.cpp:1302 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1315 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1316 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1319 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1325 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1351 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1353 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1355 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1359 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1363 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1364 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1365 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1369 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1375 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1383 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1386 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1400 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1404 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1412 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1413 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4589 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1457 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1469 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1470 src/libslic3r/PrintConfig.cpp:2367 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1475 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1486 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1500 msgid "Fuzzy skin (experimental)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1523 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1538 src/libslic3r/ExtrusionEntity.cpp:358 msgid "Skirt" msgstr "" #: src/slic3r/GUI/Tab.cpp:1560 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1565 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1585 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1598 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1602 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1606 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1614 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1622 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1630 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1650 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1660 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1663 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4666 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1678 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1680 msgid "Extruder clearance" msgstr "" #: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4667 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1716 src/slic3r/GUI/Tab.cpp:1717 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562 #: src/slic3r/GUI/Tab.cpp:4517 src/slic3r/GUI/Tab.cpp:4518 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568 #: src/slic3r/GUI/Tab.cpp:4525 src/slic3r/GUI/Tab.cpp:4672 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569 #: src/slic3r/GUI/Tab.cpp:4526 src/slic3r/GUI/Tab.cpp:4673 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1763 msgid "Post processing scripts shall modify G-code file in place." msgstr "" #: src/slic3r/GUI/Tab.cpp:1842 #, possible-c-format, possible-boost-format msgid "" "The following line %s contains reserved keywords.\n" "Please remove it, as it may cause problems in G-code visualization and " "printing time estimation." msgid_plural "" "The following lines %s contain reserved keywords.\n" "Please remove them, as they may cause problems in G-code visualization and " "printing time estimation." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:1847 msgid "Found reserved keywords in" msgstr "" #: src/slic3r/GUI/Tab.cpp:1861 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1984 msgid "Nozzle" msgstr "" #: src/slic3r/GUI/Tab.cpp:1989 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1994 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1996 src/libslic3r/PrintConfig.cpp:1894 #: src/libslic3r/PrintConfig.cpp:2944 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:2007 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:2018 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:2024 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:2031 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:2041 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2044 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:2057 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401 #: src/slic3r/GUI/Tab.cpp:4196 src/libslic3r/GCode.cpp:733 #: src/libslic3r/PrintConfig.cpp:2450 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2082 src/slic3r/GUI/Tab.cpp:2402 #: src/libslic3r/GCode.cpp:707 src/libslic3r/PrintConfig.cpp:2400 #: src/libslic3r/PrintConfig.cpp:2415 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2092 src/slic3r/GUI/Tab.cpp:2412 #: src/libslic3r/GCode.cpp:708 src/libslic3r/PrintConfig.cpp:662 #: src/libslic3r/PrintConfig.cpp:672 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2145 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2249 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"Add physical " "printer\" item in the Printer combo box. The Physical Printer profile editor " "opens also when clicking on the \"cog\" icon in the Printer settings tab. " "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2283 src/slic3r/GUI/Tab.cpp:2509 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2297 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2326 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2330 src/slic3r/GUI/Tab.cpp:2772 #: src/libslic3r/PrintConfig.cpp:1858 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2422 src/libslic3r/GCode.cpp:709 #: src/libslic3r/PrintConfig.cpp:402 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2432 src/libslic3r/GCode.cpp:710 #: src/libslic3r/PrintConfig.cpp:1584 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2442 src/libslic3r/GCode.cpp:711 #: src/libslic3r/PrintConfig.cpp:2827 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2452 src/libslic3r/GCode.cpp:712 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2462 src/libslic3r/GCode.cpp:713 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2471 src/libslic3r/GCode.cpp:714 #: src/libslic3r/PrintConfig.cpp:2441 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2480 src/libslic3r/GCode.cpp:715 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2516 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2531 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2532 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4507 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4503 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2612 src/slic3r/GUI/Tab.cpp:2699 #: src/libslic3r/PrintConfig.cpp:1613 src/libslic3r/PrintConfig.cpp:1648 #: src/libslic3r/PrintConfig.cpp:1665 src/libslic3r/PrintConfig.cpp:1682 #: src/libslic3r/PrintConfig.cpp:1698 src/libslic3r/PrintConfig.cpp:1708 #: src/libslic3r/PrintConfig.cpp:1718 src/libslic3r/PrintConfig.cpp:1731 #: src/libslic3r/PrintConfig.cpp:1741 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2635 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2641 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2650 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2655 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2664 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2670 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2724 src/slic3r/GUI/Tab.cpp:2733 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2734 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2769 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2794 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2799 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2805 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2818 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2825 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:3005 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3007 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3312 msgid "New printer preset selected" msgstr "" #: src/slic3r/GUI/Tab.cpp:3618 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3685 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3685 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3694 msgid "It's a last preset for this physical printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:3699 #, possible-boost-format msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3711 msgid "" "The physical printer below is based on the preset, you are going to delete." msgid_plural "" "The physical printers below are based on the preset, you are going to delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3716 msgid "Note, that the selected preset will be deleted from this printer too." msgid_plural "" "Note, that the selected preset will be deleted from these printers too." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3721 msgid "" "The physical printer below is based only on the preset, you are going to " "delete." msgid_plural "" "The physical printers below are based only on the preset, you are going to " "delete." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3726 msgid "" "Note, that this printer will be deleted after deleting the selected preset." msgid_plural "" "Note, that these printers will be deleted after deleting the selected preset." msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/Tab.cpp:3731 #, possible-boost-format msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3736 #, possible-boost-format msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4130 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3906 msgid "Find" msgstr "" #: src/slic3r/GUI/Tab.cpp:3906 msgid "Replace with" msgstr "" #: src/slic3r/GUI/Tab.cpp:4224 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:4227 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:4231 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:4253 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:4255 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:4257 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:4259 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:4264 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:4266 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:4269 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:4271 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4281 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:4283 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:4286 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4289 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:4291 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4297 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:4298 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:4304 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4305 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:4459 src/slic3r/GUI/Tab.cpp:4461 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4546 src/slic3r/GUI/Tab.cpp:4547 msgid "Material printing profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:4599 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4604 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4627 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4632 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4707 #, possible-boost-format msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:4709 src/libslic3r/PrintConfig.cpp:3578 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4709 src/libslic3r/PrintConfig.cpp:3680 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:771 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:789 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:831 msgid "Old Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:832 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:863 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:866 msgid "Keep" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:863 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:870 msgid "Don't save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:870 msgid "Discard" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:876 msgid "Save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:897 msgid "" "You will not be asked about the unsaved changes in presets the next time you " "create new project" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:898 msgid "" "You will not be asked about the unsaved changes in presets the next time you " "switch a preset" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:899 msgid "" "You will not be asked about the unsaved changes in presets the next time " "you: \n" "- Closing PrusaSlicer while some presets are modified,\n" "- Loading a new project while some presets are modified" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:902 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:903 #, possible-boost-format msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:935 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:937 msgid "All settings changes will not be saved" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:937 msgid "All settings changes will be discarded." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:940 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:941 msgid "Keep the selected settings." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:942 msgid "Transfer the selected settings to the newly selected preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:946 #, possible-boost-format msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:947 #, possible-boost-format msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222 msgid "The following preset was modified" msgid_plural "The following presets were modified" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228 #, possible-boost-format msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232 #, possible-boost-format msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233 #, possible-boost-format msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452 msgid "Select presets to compare" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501 msgid "Show all presets (including incompatible)" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516 msgid "Left Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517 msgid "Right Preset Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624 msgid "One of the presets doesn't found" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635 msgid "Compared presets has different printer technology" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649 msgid "Presets are the same" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657 msgid "" "Presets are different.\n" "Click this button to select the same preset for the right and left preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681 msgid "Undef category" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681 msgid "Undef group" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:37 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:37 #, possible-c-format, possible-boost-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:42 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:44 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:52 msgid "Changelog & Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:59 src/slic3r/GUI/UpdateDialogs.cpp:133 #: src/slic3r/GUI/UpdateDialogs.cpp:191 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:72 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:94 msgid "Opening Configuration Wizard" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:94 src/slic3r/GUI/UpdateDialogs.cpp:261 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:95 msgid "" "PrusaSlicer is not using the newest configuration available.\n" "Configuration Wizard may not offer the latest printers, filaments and SLA " "materials to be installed." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:97 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:100 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:121 src/slic3r/GUI/UpdateDialogs.cpp:181 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:142 msgid "Install" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:144 msgid "Don't install" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:157 src/slic3r/GUI/UpdateDialogs.cpp:212 #, possible-c-format, possible-boost-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:157 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:160 #, possible-c-format, possible-boost-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:200 src/slic3r/GUI/UpdateDialogs.cpp:247 #, possible-c-format, possible-boost-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:213 #, possible-c-format, possible-boost-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, possible-c-format, possible-boost-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format, possible-boost-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:246 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:265 #, possible-c-format, possible-boost-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:282 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:299 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:299 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 #, possible-c-format, possible-boost-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:21 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:54 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:114 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:116 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:120 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:122 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:173 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:299 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:308 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:309 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:352 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:361 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:362 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:376 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:442 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:454 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:454 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:643 #, possible-c-format, possible-boost-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:644 #, possible-c-format, possible-boost-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:141 #: src/slic3r/Utils/Repetier.cpp:69 #, possible-c-format, possible-boost-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:157 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:151 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:154 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:221 #: src/slic3r/Utils/FixModelByWin10.cpp:362 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:237 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:244 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:250 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:253 #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:265 #: src/slic3r/Utils/FixModelByWin10.cpp:272 #: src/slic3r/Utils/FixModelByWin10.cpp:303 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:379 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:395 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:397 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:399 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:401 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:403 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:413 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:419 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:164 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:170 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:172 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:292 msgid "Connection to Prusa SL1 / SL1S works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:298 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:336 msgid "Connection to PrusaLink works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:342 msgid "Could not connect to PrusaLink" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:61 #, possible-boost-format msgid "Copying of file %1% to %2% failed: %3%" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:645 #: src/slic3r/Utils/PresetUpdater.cpp:662 msgid "Continue and install configuration updates?" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:777 msgid "" "Configuration Updates causes a lost of preset modification.\n" "So, check unsaved changes and save them if necessary." msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:779 msgid "Updating" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:808 #, possible-c-format, possible-boost-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:812 #, possible-c-format, possible-boost-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:815 #, possible-c-format, possible-boost-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 #, possible-boost-format msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 #, possible-boost-format msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:157 msgid "Open G-code file:" msgstr "" #: src/slic3r/Utils/Repetier.cpp:84 msgid "Connection to Repetier works correctly." msgstr "" #: src/slic3r/Utils/Repetier.cpp:90 msgid "Could not connect to Repetier" msgstr "" #: src/slic3r/Utils/Repetier.cpp:92 msgid "Note: Repetier version at least 0.90.0 is required." msgstr "" #: src/slic3r/Utils/Repetier.cpp:246 #, possible-boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:253 #, possible-boost-format msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/slic3r/Utils/Repetier.cpp:266 #, possible-boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #: src/slic3r/Config/Snapshot.cpp:584 msgid "Taking a configuration snapshot failed." msgstr "" #: src/slic3r/Config/Snapshot.cpp:598 msgid "" "PrusaSlicer has encountered an error while taking a configuration snapshot." msgstr "" #: src/slic3r/Config/Snapshot.cpp:599 msgid "PrusaSlicer error" msgstr "" #: src/slic3r/Config/Snapshot.cpp:601 msgid "Continue" msgstr "" #: src/slic3r/Config/Snapshot.cpp:601 msgid "Abort" msgstr "" #: src/libslic3r/GCode.cpp:539 msgid "There is an object with no extrusions in the first layer." msgstr "" #: src/libslic3r/GCode.cpp:570 #, possible-boost-format msgid "Empty layer between %1% and %2%." msgstr "" #: src/libslic3r/GCode.cpp:573 msgid "(Some lines not shown)" msgstr "" #: src/libslic3r/GCode.cpp:575 #, possible-boost-format msgid "Object name: %1%" msgstr "" #: src/libslic3r/GCode.cpp:576 msgid "" "Make sure the object is printable. This is usually caused by negligibly " "small extrusions or by a faulty model. Try to repair the model or change its " "orientation on the bed." msgstr "" #: src/libslic3r/GCode.cpp:718 msgid "Filament Start G-code" msgstr "" #: src/libslic3r/GCode.cpp:725 msgid "Filament End G-code" msgstr "" #: src/libslic3r/GCode.cpp:764 msgid "In the custom G-code were found reserved keywords:" msgstr "" #: src/libslic3r/GCode.cpp:766 msgid "" "This may cause problems in g-code visualization and printing time estimation." msgstr "" #: src/libslic3r/GCode.cpp:1236 src/libslic3r/GCode.cpp:1247 msgid "No extrusions were generated for objects." msgstr "" #: src/libslic3r/GCode.cpp:1445 msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:332 src/libslic3r/ExtrusionEntity.cpp:368 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 #, possible-boost-format msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1734 #, possible-boost-format msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1745 msgid "" "The selected 3MF contains FDM supports painted object using a newer version " "of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1749 msgid "" "The selected 3MF contains seam painted object using a newer version of " "PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1753 msgid "" "The selected 3MF contains multi-material painted object using a newer " "version of PrusaSlicer and is not compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:993 #, possible-boost-format msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/GCode/PostProcessor.cpp:289 #, possible-boost-format msgid "" "Post-processing script %1% failed.\n" "\n" "The post-processing script is expected to change the G-code file %2% in " "place, but the G-code file was deleted and likely saved under a new name.\n" "Please adjust the post-processing script to change the G-code in place and " "consult the manual on how to optionally rename the post-processed G-code " "file.\n" msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Print.cpp:447 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:450 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:454 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:456 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:465 msgid "" "Only a single object may be printed at a time in Spiral Vase mode. Either " "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" #: src/libslic3r/Print.cpp:469 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:482 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:488 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:490 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:492 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:494 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:496 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:517 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:519 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:522 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:524 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:537 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:559 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:572 #, possible-boost-format msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:575 #, possible-boost-format msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:586 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:594 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:598 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:634 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:639 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:793 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:815 msgid "Generating skirt and brim" msgstr "" #: src/libslic3r/Print.cpp:863 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:867 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLA/Pad.cpp:533 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:628 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:640 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:646 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:661 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:668 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:784 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 src/libslic3r/SLAPrintSteps.cpp:630 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:51 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:67 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:426 msgid "Too many overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:433 msgid "" "Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:441 msgid "Unable to drill the current configuration of holes into the model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:461 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:467 msgid "Failed to drill some holes into the model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:511 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:682 src/libslic3r/SLAPrintSteps.cpp:691 #: src/libslic3r/SLAPrintSteps.cpp:729 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:721 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:845 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:84 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:223 src/libslic3r/PrintConfig.cpp:224 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:231 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:236 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:241 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:246 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:248 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:256 msgid "G-code thumbnails" msgstr "" #: src/libslic3r/PrintConfig.cpp:257 msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" #: src/libslic3r/PrintConfig.cpp:265 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:272 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:273 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:281 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:282 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" #: src/libslic3r/PrintConfig.cpp:291 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:292 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:300 msgid "Name of the printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:308 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:324 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:332 msgid "Ignore HTTPS certificate revocation checks" msgstr "" #: src/libslic3r/PrintConfig.cpp:333 msgid "" "Ignore HTTPS certificate revocation checks in case of missing or offline " "distribution points. One may want to enable this option for self signed " "certificates if connection fails." msgstr "" #: src/libslic3r/PrintConfig.cpp:340 msgid "Printer preset names" msgstr "" #: src/libslic3r/PrintConfig.cpp:341 msgid "Names of presets related to the physical printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:346 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:351 msgid "API key" msgstr "" #: src/libslic3r/PrintConfig.cpp:352 msgid "HTTP digest" msgstr "" #: src/libslic3r/PrintConfig.cpp:372 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:373 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:380 msgid "Avoid crossing perimeters - Max detour length" msgstr "" #: src/libslic3r/PrintConfig.cpp:382 msgid "" "The maximum detour length for avoid crossing perimeters. If the detour is " "longer than this value, avoid crossing perimeters is not applied for this " "travel path. Detour length could be specified either as an absolute value or " "as percentage (for example 50%) of a direct travel path." msgstr "" #: src/libslic3r/PrintConfig.cpp:385 msgid "mm or % (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:392 src/libslic3r/PrintConfig.cpp:2789 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:393 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:396 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:403 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:413 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:414 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:425 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:426 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:434 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:436 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:442 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:443 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:616 #: src/libslic3r/PrintConfig.cpp:1169 src/libslic3r/PrintConfig.cpp:1178 #: src/libslic3r/PrintConfig.cpp:1378 src/libslic3r/PrintConfig.cpp:1671 #: src/libslic3r/PrintConfig.cpp:1722 src/libslic3r/PrintConfig.cpp:1733 #: src/libslic3r/PrintConfig.cpp:1743 src/libslic3r/PrintConfig.cpp:1941 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:451 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:453 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:456 src/libslic3r/PrintConfig.cpp:1075 #: src/libslic3r/PrintConfig.cpp:2232 src/libslic3r/PrintConfig.cpp:2242 #: src/libslic3r/PrintConfig.cpp:2533 src/libslic3r/PrintConfig.cpp:2774 #: src/libslic3r/PrintConfig.cpp:2991 src/libslic3r/PrintConfig.cpp:3552 #: src/libslic3r/PrintConfig.cpp:3673 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:462 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:463 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:1087 #: src/libslic3r/PrintConfig.cpp:1559 src/libslic3r/PrintConfig.cpp:1751 #: src/libslic3r/PrintConfig.cpp:1814 src/libslic3r/PrintConfig.cpp:2065 #: src/libslic3r/PrintConfig.cpp:2124 src/libslic3r/PrintConfig.cpp:3177 #: src/libslic3r/PrintConfig.cpp:3466 src/libslic3r/PrintConfig.cpp:3592 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:471 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:473 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:483 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:485 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:486 src/libslic3r/PrintConfig.cpp:894 #: src/libslic3r/PrintConfig.cpp:902 src/libslic3r/PrintConfig.cpp:911 #: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:946 #: src/libslic3r/PrintConfig.cpp:965 src/libslic3r/PrintConfig.cpp:1306 #: src/libslic3r/PrintConfig.cpp:1496 src/libslic3r/PrintConfig.cpp:1578 #: src/libslic3r/PrintConfig.cpp:1654 src/libslic3r/PrintConfig.cpp:1688 #: src/libslic3r/PrintConfig.cpp:1700 src/libslic3r/PrintConfig.cpp:1710 #: src/libslic3r/PrintConfig.cpp:1773 src/libslic3r/PrintConfig.cpp:1832 #: src/libslic3r/PrintConfig.cpp:1972 src/libslic3r/PrintConfig.cpp:2199 #: src/libslic3r/PrintConfig.cpp:2208 src/libslic3r/PrintConfig.cpp:2739 #: src/libslic3r/PrintConfig.cpp:2889 src/libslic3r/PrintConfig.cpp:2899 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:493 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:495 msgid "" "The horizontal width of the brim that will be printed around each object on " "the first layer. When raft is used, no brim is generated (use " "raft_first_layer_expansion)." msgstr "" #: src/libslic3r/PrintConfig.cpp:504 msgid "Brim type" msgstr "" #: src/libslic3r/PrintConfig.cpp:506 msgid "" "The places where the brim will be printed around each object on the first " "layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:512 msgid "No brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:513 msgid "Outer brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:514 msgid "Inner brim only" msgstr "" #: src/libslic3r/PrintConfig.cpp:515 msgid "Outer and inner brim" msgstr "" #: src/libslic3r/PrintConfig.cpp:520 msgid "Brim separation gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:522 msgid "" "Offset of brim from the printed object. The offset is applied after the " "elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:529 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:530 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:537 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:538 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:548 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:549 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:563 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:564 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:581 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:582 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:590 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:591 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:596 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:597 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:604 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:605 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:613 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:622 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:623 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:629 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:630 src/libslic3r/PrintConfig.cpp:3396 #: src/libslic3r/PrintConfig.cpp:3407 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:636 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:637 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:646 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:648 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:654 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:655 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:663 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:673 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:684 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:686 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:692 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:694 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:1144 #: src/libslic3r/PrintConfig.cpp:2704 src/libslic3r/PrintConfig.cpp:2721 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:705 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:706 src/libslic3r/PrintConfig.cpp:1145 msgid "Aligned Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:1151 #: src/libslic3r/PrintConfig.cpp:2722 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:708 src/libslic3r/PrintConfig.cpp:1155 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:709 src/libslic3r/PrintConfig.cpp:1156 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:710 src/libslic3r/PrintConfig.cpp:1157 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:716 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:718 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:727 src/libslic3r/PrintConfig.cpp:739 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:729 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:843 #: src/libslic3r/PrintConfig.cpp:1200 src/libslic3r/PrintConfig.cpp:1403 #: src/libslic3r/PrintConfig.cpp:1460 src/libslic3r/PrintConfig.cpp:1487 #: src/libslic3r/PrintConfig.cpp:1961 src/libslic3r/PrintConfig.cpp:2347 #: src/libslic3r/PrintConfig.cpp:2521 src/libslic3r/PrintConfig.cpp:2610 #: src/libslic3r/PrintConfig.cpp:2845 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:741 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:1222 #: src/libslic3r/PrintConfig.cpp:1233 src/libslic3r/PrintConfig.cpp:2306 #: src/libslic3r/PrintConfig.cpp:2359 src/libslic3r/PrintConfig.cpp:2690 #: src/libslic3r/PrintConfig.cpp:2859 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:751 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:753 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:759 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:761 msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:771 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:783 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:794 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:804 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:805 src/libslic3r/PrintConfig.cpp:868 #: src/libslic3r/PrintConfig.cpp:3248 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:811 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:812 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:821 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:822 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:827 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:828 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:837 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:839 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:851 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:852 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:857 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:858 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:2294 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:867 src/libslic3r/PrintConfig.cpp:3247 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:873 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:874 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:1779 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:883 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:892 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:893 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:900 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:901 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:908 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:909 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:917 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:918 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:925 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:926 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:935 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:936 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:944 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:945 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:952 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:953 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:957 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:963 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:964 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:971 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:972 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:979 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:980 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:986 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:987 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:995 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:1002 src/libslic3r/PrintConfig.cpp:3286 #: src/libslic3r/PrintConfig.cpp:3287 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:1003 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1006 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:1011 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1012 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:1039 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1040 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:1046 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:1047 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:1052 msgid "Spool weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:1053 msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " "filament spool before printing and one may compare the measured weight with " "the calculated weight of the filament with the spool to find out whether the " "amount of filament on the spool is sufficient to finish the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1057 msgid "g" msgstr "" #: src/libslic3r/PrintConfig.cpp:1066 src/libslic3r/PrintConfig.cpp:3391 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1070 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1072 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:1084 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:1086 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:1121 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:1123 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:2753 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1148 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:1149 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1150 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:2706 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1153 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:1154 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1158 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1159 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:1161 msgid "Lightning" msgstr "" #: src/libslic3r/PrintConfig.cpp:1167 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1175 msgid "First object layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1176 msgid "" "This is the acceleration your printer will use for first layer of object " "above raft interface. Set zero to disable acceleration control for first " "layer of object above raft interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:1185 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1186 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:1196 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1210 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates." msgstr "" #: src/libslic3r/PrintConfig.cpp:1218 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1219 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1229 msgid "Speed of object first layer over raft interface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1230 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first object layer above raft interface, regardless " "of their type. If expressed as a percentage (for example: 40%) it will scale " "the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1240 msgid "First layer nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:1241 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:1249 msgid "Full fan speed at layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:1250 msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " "\"full_fan_speed_layer\" will be ignored if lower than " "\"disable_fan_first_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"disable_fan_first_layers\" + 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1262 msgid "Fuzzy skin type." msgstr "" #: src/libslic3r/PrintConfig.cpp:1269 msgid "Outside walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:1270 msgid "All walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:1275 msgid "Fuzzy skin thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:1277 msgid "" "The maximum distance that each skin point can be offset (both ways), " "measured perpendicular to the perimeter wall." msgstr "" #: src/libslic3r/PrintConfig.cpp:1285 msgid "Fuzzy skin point distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1287 msgid "" "Perimeters will be split into multiple segments by inserting Fuzzy skin " "points. Lowering the Fuzzy skin point distance will increase the number of " "randomly offset points on the perimeter wall." msgstr "" #: src/libslic3r/PrintConfig.cpp:1295 msgid "Fill gaps" msgstr "" #: src/libslic3r/PrintConfig.cpp:1297 msgid "" "Enables filling of gaps between perimeters and between the inner most " "perimeters and infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1304 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:1312 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1313 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:1320 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1321 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1348 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1353 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1354 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1361 msgid "G-code substitutions" msgstr "" #: src/libslic3r/PrintConfig.cpp:1362 msgid "Find / replace patterns in G-code lines and substitute them." msgstr "" #: src/libslic3r/PrintConfig.cpp:1367 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1368 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1376 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1384 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1386 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1389 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1395 msgid "Length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1397 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " "anchor_length_max. Set this parameter to zero to disable anchoring " "perimeters connected to a single infill line." msgstr "" #: src/libslic3r/PrintConfig.cpp:1413 msgid "0 (no open anchors)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1414 src/libslic3r/PrintConfig.cpp:1437 msgid "1 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1415 src/libslic3r/PrintConfig.cpp:1438 msgid "2 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1416 src/libslic3r/PrintConfig.cpp:1439 msgid "5 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1417 src/libslic3r/PrintConfig.cpp:1440 msgid "10 mm" msgstr "" #: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1441 msgid "1000 (unlimited)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1423 msgid "Maximum length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1425 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " "parameter. Set this parameter to zero to disable anchoring." msgstr "" #: src/libslic3r/PrintConfig.cpp:1436 msgid "0 (not anchored)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1446 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1448 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1456 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1467 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1468 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1473 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1475 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1482 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1484 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1495 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1503 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1504 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1517 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1518 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1526 msgid "Maximum width of a segmented region" msgstr "" #: src/libslic3r/PrintConfig.cpp:1527 msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" #: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:2139 #: src/libslic3r/PrintConfig.cpp:2148 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1535 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1536 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1542 src/libslic3r/PrintConfig.cpp:1544 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1549 msgid "All top surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1550 msgid "Topmost surface only" msgstr "" #: src/libslic3r/PrintConfig.cpp:1551 msgid "All solid surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1556 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1558 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1566 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1568 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1585 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1596 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1597 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1605 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1606 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1611 msgid "How to apply limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1612 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1614 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1619 msgid "Emit to G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1620 msgid "Use for time estimate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1621 msgid "Ignore" msgstr "" #: src/libslic3r/PrintConfig.cpp:1644 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1645 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1646 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1647 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1650 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1652 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1653 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1661 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1662 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1663 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1664 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1667 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1668 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1669 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1670 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1678 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1679 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1680 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1681 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1684 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1685 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1686 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1687 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1699 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1707 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1709 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1717 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1719 msgid "" "Maximum acceleration when extruding (M204 P)\n" "\n" "Marlin (legacy) firmware flavor will use this also as travel acceleration " "(M204 T)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1730 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1732 msgid "Maximum acceleration when retracting (M204 R)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1740 msgid "Maximum acceleration for travel moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:1742 msgid "Maximum acceleration for travel moves (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1749 src/libslic3r/PrintConfig.cpp:1758 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1750 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1759 msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1769 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1770 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1780 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1789 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1790 src/libslic3r/PrintConfig.cpp:1801 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1794 src/libslic3r/PrintConfig.cpp:1805 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1800 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1812 src/libslic3r/PrintConfig.cpp:1821 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1813 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1822 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1830 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1831 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1838 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1839 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1848 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1849 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1859 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1864 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1865 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1887 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1888 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1895 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1902 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1903 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1912 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1914 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1920 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1921 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1929 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1930 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1955 #: src/libslic3r/PrintConfig.cpp:1969 src/libslic3r/PrintConfig.cpp:1979 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1939 msgid "" "This is the acceleration your printer will use for perimeters. Set zero to " "disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1946 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1948 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1957 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1971 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1981 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1985 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1993 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:2005 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2006 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2011 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2012 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2020 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2021 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:2026 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:2027 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:2044 msgid "Raft contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2046 msgid "" "The vertical distance between object and raft. Ignored for soluble interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2053 msgid "Raft expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2055 msgid "Expansion of the raft in XY plane for better stability." msgstr "" #: src/libslic3r/PrintConfig.cpp:2062 msgid "First layer density" msgstr "" #: src/libslic3r/PrintConfig.cpp:2064 msgid "Density of the first raft or support layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2072 msgid "First layer expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2074 msgid "" "Expansion of the first raft or support layer to improve adhesion to print " "bed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2081 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2083 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:2091 msgid "Slice resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:2092 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:2102 msgid "G-code resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:2103 msgid "" "Maximum deviation of exported G-code paths from their full resolution " "counterparts. Very high resolution G-code requires huge amount of RAM to " "slice and preview, also a 3D printer may stutter not being able to process a " "high resolution G-code in a timely manner. On the other hand, a low " "resolution G-code will produce a low poly effect and because the G-code " "reduction is performed at each layer independently, visible artifacts may be " "produced." msgstr "" #: src/libslic3r/PrintConfig.cpp:2114 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2115 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:2121 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:2122 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:2129 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2130 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2143 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2136 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2137 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2144 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2145 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2153 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2154 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:2161 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2162 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:2163 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2170 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:2171 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2172 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2180 src/libslic3r/PrintConfig.cpp:2188 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:2181 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2189 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:2196 src/libslic3r/PrintConfig.cpp:2197 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2198 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2204 src/libslic3r/PrintConfig.cpp:2205 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:2206 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:2213 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:2215 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:2221 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:2222 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:2223 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:2231 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2233 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:2234 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2241 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2243 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2244 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2251 msgid "Distance from brim/object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2252 msgid "" "Distance between skirt and brim (when draft shield is not used) or objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:2258 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2259 msgid "Height of skirt expressed in layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:2265 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:2266 msgid "" "With draft shield active, the skirt will be printed skirt_distance from the " "object, possibly intersecting brim.\n" "Enabled = skirt is as tall as the highest printed object.\n" "Limited = skirt is as tall as specified by skirt_height.\n" "This is useful to protect an ABS or ASA print from warping and detaching " "from print bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:2274 msgid "Disabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2275 msgid "Limited" msgstr "" #: src/libslic3r/PrintConfig.cpp:2276 msgid "Enabled" msgstr "" #: src/libslic3r/PrintConfig.cpp:2281 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2282 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2283 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:2291 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:2292 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:2301 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:2303 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2313 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:2315 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2316 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:2322 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2324 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:2330 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:2332 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2344 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2356 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2368 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2374 src/libslic3r/PrintConfig.cpp:2375 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:2381 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:2382 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" #: src/libslic3r/PrintConfig.cpp:2390 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2391 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:2401 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:2416 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:2432 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2433 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2442 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:2451 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2459 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2460 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:2465 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:2466 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2471 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2472 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2479 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2481 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:2489 msgid "Slicing Mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2491 msgid "" "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " "close all holes in the model." msgstr "" #: src/libslic3r/PrintConfig.cpp:2496 msgid "Regular" msgstr "" #: src/libslic3r/PrintConfig.cpp:2497 msgid "Even-odd" msgstr "" #: src/libslic3r/PrintConfig.cpp:2498 msgid "Close holes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2503 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2505 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2509 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2511 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2517 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2519 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2530 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2532 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2542 src/libslic3r/PrintConfig.cpp:3501 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2548 msgid "Top contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2550 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2558 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2559 msgid "0.1 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2560 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2566 msgid "Bottom contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2568 msgid "" "The vertical distance between the object top surface and the support " "material interface. If set to zero, support_material_contact_distance will " "be used for both top and bottom contact Z distances." msgstr "" #. TRN To be shown in Print Settings "Bottom contact Z distance". Have to be as short as possible #. TRN To be shown in Print Settings "Bottom interface layers". Have to be as short as possible #: src/libslic3r/PrintConfig.cpp:2576 src/libslic3r/PrintConfig.cpp:2661 msgid "Same as top" msgstr "" #: src/libslic3r/PrintConfig.cpp:2583 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2585 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2590 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2596 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2598 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2607 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2617 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2619 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2624 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2626 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2634 msgid "Top interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2636 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2643 msgid "0 (off)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2644 msgid "1 (light)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2645 msgid "2 (default)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2646 msgid "3 (heavy)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2652 msgid "Bottom interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2654 msgid "" "Number of interface layers to insert between the object(s) and support " "material. Set to -1 to use support_material_interface_layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2667 msgid "Closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2669 msgid "" "For snug supports, the support regions will be merged using morphological " "closing operation. Gaps smaller than the closing radius will be filled in." msgstr "" #: src/libslic3r/PrintConfig.cpp:2677 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2679 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2688 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2697 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2699 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2705 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2711 msgid "Interface pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2713 msgid "" "Pattern used to generate support material interface. Default pattern for non-" "soluble support interface is Rectilinear, while default pattern for soluble " "support interface is Concentric." msgstr "" #: src/libslic3r/PrintConfig.cpp:2727 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2729 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2738 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2745 msgid "Style" msgstr "" #: src/libslic3r/PrintConfig.cpp:2747 msgid "" "Style and shape of the support towers. Projecting the supports into a " "regular grid will create more stable supports, while snug support towers " "will save material and reduce object scarring." msgstr "" #: src/libslic3r/PrintConfig.cpp:2754 msgid "Snug" msgstr "" #: src/libslic3r/PrintConfig.cpp:2759 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2761 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2767 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2769 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2781 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2783 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2790 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2793 msgid "Nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2799 msgid "Thick bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:2801 msgid "" "If enabled, bridges are more reliable, can bridge longer distances, but may " "look worse. If disabled, bridges look better but are reliable just for " "shorter bridged distances." msgstr "" #: src/libslic3r/PrintConfig.cpp:2807 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2809 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2815 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2816 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2828 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} " "and {next_extruder} can be used. When a tool-changing command which changes " "to the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2841 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2854 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2869 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2870 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2878 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2881 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2888 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2896 msgid "Z travel" msgstr "" #: src/libslic3r/PrintConfig.cpp:2897 msgid "" "Speed for movements along the Z axis.\n" "When set to zero, the value is ignored and regular travel speed is used " "instead." msgstr "" #: src/libslic3r/PrintConfig.cpp:2905 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2906 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2912 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2913 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2919 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2920 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2930 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2931 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2937 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2938 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2945 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2951 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2952 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2958 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2959 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2968 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2969 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2975 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2976 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2983 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2989 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2990 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2996 src/libslic3r/PrintConfig.cpp:2997 msgid "Wipe tower brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3005 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:3006 msgid "" "Purging after toolchange will be done inside this object's infills. This " "lowers the amount of waste but may result in longer print time due to " "additional travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:3013 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:3014 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:3020 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3021 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:3027 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3029 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:3037 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:3038 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3105 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3106 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3111 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3112 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:3117 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:3119 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3125 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3130 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3131 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:3132 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3137 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:3138 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:3139 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:3144 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3145 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3151 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:3152 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:3157 src/libslic3r/PrintConfig.cpp:3782 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:3158 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3159 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3166 src/libslic3r/PrintConfig.cpp:3781 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:3167 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3168 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3175 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:3176 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:3183 src/libslic3r/PrintConfig.cpp:3184 #: src/libslic3r/PrintConfig.cpp:3185 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3191 src/libslic3r/PrintConfig.cpp:3193 msgid "Printer scaling correction in X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3192 msgid "Printer scaling X axis correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3199 src/libslic3r/PrintConfig.cpp:3201 msgid "Printer scaling correction in Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3200 msgid "Printer scaling Y axis correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3207 src/libslic3r/PrintConfig.cpp:3209 msgid "Printer scaling correction in Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3208 msgid "Printer scaling Z axis correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3215 src/libslic3r/PrintConfig.cpp:3216 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3217 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:3223 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3225 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:3232 src/libslic3r/PrintConfig.cpp:3233 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:3234 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:3253 src/libslic3r/PrintConfig.cpp:3254 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:3265 src/libslic3r/PrintConfig.cpp:3266 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3272 src/libslic3r/PrintConfig.cpp:3273 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:3274 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3279 src/libslic3r/PrintConfig.cpp:3280 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:3281 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:3288 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:3295 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3300 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:3301 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3308 src/libslic3r/PrintConfig.cpp:3309 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3316 src/libslic3r/PrintConfig.cpp:3317 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3324 src/libslic3r/PrintConfig.cpp:3325 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3331 src/libslic3r/PrintConfig.cpp:3332 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3339 src/libslic3r/PrintConfig.cpp:3340 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3347 src/libslic3r/PrintConfig.cpp:3348 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:3354 src/libslic3r/PrintConfig.cpp:3355 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:3361 src/libslic3r/PrintConfig.cpp:3362 msgid "Correction for expansion in X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3368 src/libslic3r/PrintConfig.cpp:3369 msgid "Correction for expansion in Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3375 src/libslic3r/PrintConfig.cpp:3376 msgid "Correction for expansion in Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:3382 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:3383 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:3395 src/libslic3r/PrintConfig.cpp:3406 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:3417 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:3419 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:3424 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3426 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:3433 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3435 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:3442 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3444 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3452 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3454 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:3462 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:3464 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:3473 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:3475 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:3483 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:3484 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:3492 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:3493 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:3494 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:3506 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:3508 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:3517 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:3519 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:3527 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3529 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:3536 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3539 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3549 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:3551 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:3559 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:3561 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3568 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3570 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:3580 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:3591 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:3597 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:3599 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:3605 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:3607 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:3612 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3614 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3622 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3623 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:3636 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:3637 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:3647 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3649 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3669 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3671 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3682 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3687 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3689 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3694 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3696 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3705 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3707 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3714 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3716 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3723 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3726 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3733 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:3735 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:3740 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3742 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:3750 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:3752 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:3762 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3774 msgid "Print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:3776 msgid "" "A slower printing profile might be necessary when using materials with " "higher viscosity or with some hollowed parts. It slows down the tilt " "movement and adds a delay before exposure." msgstr "" #: src/libslic3r/PrintConfig.cpp:4238 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:4239 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:4250 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:4251 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:4256 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4257 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4261 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:4262 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:4266 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:4267 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:4272 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:4277 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4278 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:4283 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:4284 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:4289 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:4290 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:4295 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4296 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4300 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:4301 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:4305 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:4306 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:4310 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4311 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:4321 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:4322 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:4327 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:4348 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:4349 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:4353 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:4354 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:4357 msgid "Ensure on bed" msgstr "" #: src/libslic3r/PrintConfig.cpp:4358 msgid "" "Lift the object above the bed when it is partially below. Enabled by " "default, use --no-ensure-on-bed to disable." msgstr "" #: src/libslic3r/PrintConfig.cpp:4362 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:4363 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:4367 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:4368 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:4372 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:4377 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4381 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4385 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:4386 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4390 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:4391 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:4396 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4401 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:4404 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:4405 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:4414 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:4415 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:4418 msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4419 msgid "" "This version of PrusaSlicer may not understand configurations produced by " "the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend " "the list of supported firmware flavors. One may decide to bail out or to " "substitute an unknown value with a default silently or verbosely." msgstr "" #: src/libslic3r/PrintConfig.cpp:4426 msgid "Bail out on unknown configuration values" msgstr "" #: src/libslic3r/PrintConfig.cpp:4427 msgid "" "Enable reading unknown configuration values by verbosely substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4428 msgid "" "Enable reading unknown configuration values by silently substituting them " "with defaults." msgstr "" #: src/libslic3r/PrintConfig.cpp:4432 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:4433 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:4436 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:4437 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:4441 msgid "Single instance mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:4442 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:4453 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:4454 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:4457 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:4458 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:4464 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:4465 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:125 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:228 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:401 msgid "Generating support material" msgstr "" #: resources/data/hints.ini: [hint:Fuzzy skin] msgid "Fuzzy skin\nDid you know that you can create rough fibre-like texture on the sides of your models using theFuzzy skinfeature? You can also use modifiers to apply fuzzy-skin only to a portion of your model." msgstr "" #: resources/data/hints.ini: [hint:Shapes gallery] msgid "Shapes gallery\nDid you know that PrusaSlicer has a Shapes Gallery? You can use the included models as modifiers, negative volumes or as printable objects. Right-click the platter and selectAdd Shape - Gallery." msgstr "" #: resources/data/hints.ini: [hint:Arrange settings] msgid "Arrange settings\nDid you know that you can right-click theArrange iconto adjust the size of the gap between objects and to allow automatic rotations?" msgstr "" #: resources/data/hints.ini: [hint:Negative volume] msgid "Negative volume\nDid you know that you can subtract one mesh from another using the Negative volume modifier? That way you can, for example, create easily resizable holes directly in PrusaSlicer. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Simplify mesh] msgid "Simplify mesh\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Reload from disk] msgid "Reload from disk\nDid you know that if you created a newer version of your model, you can simply reload it in PrusaSlicer? Right-click the model in the 3D view and choose Reload from disk. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Hiding sidebar] msgid "Hiding sidebar\nDid you know that you can hide the right sidebar using the shortcut Shift+Tab? You can also enable the icon for this from thePreferences." msgstr "" #: resources/data/hints.ini: [hint:Perspective camera] msgid "Perspective camera\nDid you know that you can use the K key to quickly switch between an orthographic and perspective camera?" msgstr "" #: resources/data/hints.ini: [hint:Camera Views] msgid "Camera Views\nDid you know that you can use the number keys 0-6 to quickly switch between predefined camera angles?" msgstr "" #: resources/data/hints.ini: [hint:Place on face] msgid "Place on face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select thePlace on facefunction or press the F key." msgstr "" #: resources/data/hints.ini: [hint:Set number of instances] msgid "Set number of instances\nDid you know that you can right-click a model and set an exact number of instances instead of copy-pasting it several times?" msgstr "" #: resources/data/hints.ini: [hint:Combine infill] msgid "Combine infill\nDid you know that you can print the infill with a higher layer height compared to perimeters to save print time using the settingCombine infill every." msgstr "" #: resources/data/hints.ini: [hint:Variable layer height] msgid "Variable layer height\nDid you know that you can print different regions of your model with a different layer height and smooth the transitions between them? Try theVariable layer height tool. (Not available for SLA printers.)" msgstr "" #: resources/data/hints.ini: [hint:Undo/redo history] msgid "Undo/redo history\nDid you know that you can right-click theundo/redo arrowsto see the history of changes and to undo or redo several actions at once?" msgstr "" #: resources/data/hints.ini: [hint:Different layer height for each model] msgid "Different layer height for each model\nDid you know that you can print each model on the plater with a different layer height? Right-click the model in the 3D view, choose Layers and Perimeters and adjust the values in the right panel. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Solid infill threshold area] msgid "Solid infill threshold area\nDid you know that you can make parts of your model with a small cross-section be filled with solid infill automatically? Set theSolid infill threshold area. (Expert mode only.)" msgstr "" #: resources/data/hints.ini: [hint:Search functionality] msgid "Search functionality\nDid you know that you use theSearchtool to quickly find a specific PrusaSlicer setting? Or use the familiar shortcut Ctrl+F." msgstr "" #: resources/data/hints.ini: [hint:Box selection] msgid "Box selection\nDid you know that you can do a box selection with Shift+Mouse drag? You can also box-deselect objects with Alt+Mouse drag." msgstr "" #: resources/data/hints.ini: [hint:Zoom on selected objects or on all objects if none selected] msgid "Zoom on selected objects or on all objects if none selected\nDid you know that you can zoom in on selected objects by pressing the Z key? If none are selected, the camera will zoom on all objects in the scene." msgstr "" #: resources/data/hints.ini: [hint:Printable toggle] msgid "Printable toggle\nDid you know that you can disable the G-code generation for the selected model without having to move or delete it? Toggle the Printable property of a model from the Right-click context menu." msgstr "" #: resources/data/hints.ini: [hint:Mirror] msgid "Mirror\nDid you know that you can mirror the selected model to create a reversed version of it? Right-click the model, select Mirror and pick the mirror axis." msgstr "" #: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45 degrees] msgid "PageUp / PageDown quick rotation by 45 degrees\nDid you know that you can quickly rotate selected models by 45 degrees around the Z-axis clockwise or counter-clockwise by pressing Page Up or Page Down respectively?" msgstr "" #: resources/data/hints.ini: [hint:Load config from G-code] msgid "Load config from G-code\nDid you know that you can use File-Import-Import Config to load print, filament and printer profiles from an existing G-code file? Similarly, you can use File-Import-Import SL1 / SL1S archive, which also lets you reconstruct 3D models from the voxel data." msgstr "" #: resources/data/hints.ini: [hint:Ironing] msgid "Ironing\nDid you know that you can smooth top surfaces of prints using Ironing? The nozzle will run a special second infill phase at the same layer to fill in holes and flatten any lifted plastic. Read more in the documentation. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on supports] msgid "Paint-on supports\nDid you know that you can paint directly on the object and select areas, where supports should be enforced or blocked? Try thePaint-on supportsfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Paint-on seam] msgid "Paint-on seam\nDid you know that you can paint directly on the object and select where to place the start/endpoint of each perimeter loop? Try theSeam paintingfeature. (Requires Advanced or Expert mode.)" msgstr "" #: resources/data/hints.ini: [hint:Insert Pause] msgid "Insert Pause\nDid you know that you can schedule the print to pause at a specific layer? Right-click the layer slider in the Preview and select Add pause print (M601). This can be used to insert magnets, weights or nuts into your prints. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Insert Custom G-code] msgid "Insert Custom G-code\nDid you know that you can insert a custom G-code at a specific layer? Left-click the layer in the Preview, Right-click the plus icon and select Add custom G-code. With this function you can, for example, create a temperature tower. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Configuration snapshots] msgid "Configuration snapshots\nDid you know that you can roll back to a complete backup of all system and user profiles? You can view and move back and forth between snapshots using the Configuration - Configuration snapshots menu." msgstr "" #: resources/data/hints.ini: [hint:Minimum shell thickness] msgid "Minimum shell thickness\nDid you know that instead of the number of top and bottom layers, you can define theMinimum shell thicknessin millimeters? This feature is especially useful when using the variable layer height function." msgstr "" #: resources/data/hints.ini: [hint:Settings in non-modal window] msgid "Settings in non-modal window\nDid you know that you can open the Settings in a new non-modal window? This means you can have settings open on one screen and the G-code Preview on the other. Go to thePreferencesand select Settings in non-modal window." msgstr "" #: resources/data/hints.ini: [hint:Adaptive infills] msgid "Adaptive infills\nDid you know that you can use the Adaptive cubic and Support cubic infills to decrease the print time and lower the filament consumption? Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Fullscreen mode] msgid "Fullscreen mode\nDid you know that you can switch PrusaSlicer to fullscreen mode? Use the F11 hotkey." msgstr ""