#include <cassert>
#include "PresetBundle.hpp"
#include "libslic3r.h"
#include "Utils.hpp"
#include "Model.hpp"
#include "format.hpp"
#include <algorithm>
#include <set>
#include <fstream>
#include <unordered_set>
#include <boost/filesystem.hpp>
#include <boost/algorithm/clamp.hpp>
#include <boost/algorithm/string/predicate.hpp>
#include <boost/nowide/cenv.hpp>
#include <boost/nowide/cstdio.hpp>
#include <boost/nowide/fstream.hpp>
#include <boost/property_tree/ini_parser.hpp>
#include <boost/property_tree/ptree.hpp>
#include <boost/locale.hpp>
#include <boost/log/trivial.hpp>
// Store the print/filament/printer presets into a "presets" subdirectory of the Slic3rPE config dir.
// This breaks compatibility with the upstream Slic3r if the --datadir is used to switch between the two versions.
// #define SLIC3R_PROFILE_USE_PRESETS_SUBDIR
namespace Slic3r {
static std::vector<std::string> s_project_options {
"colorprint_heights",
"wiping_volumes_extruders",
"wiping_volumes_matrix"
};
const char *PresetBundle::PRUSA_BUNDLE = "PrusaResearch";
PresetBundle::PresetBundle() :
prints(Preset::TYPE_PRINT, Preset::print_options(), static_cast<const PrintRegionConfig&>(FullPrintConfig::defaults())),
filaments(Preset::TYPE_FILAMENT, Preset::filament_options(), static_cast<const PrintRegionConfig&>(FullPrintConfig::defaults())),
sla_materials(Preset::TYPE_SLA_MATERIAL, Preset::sla_material_options(), static_cast<const SLAMaterialConfig&>(SLAFullPrintConfig::defaults())),
sla_prints(Preset::TYPE_SLA_PRINT, Preset::sla_print_options(), static_cast<const SLAPrintObjectConfig&>(SLAFullPrintConfig::defaults())),
printers(Preset::TYPE_PRINTER, Preset::printer_options(), static_cast<const PrintRegionConfig&>(FullPrintConfig::defaults()), "- default FFF -"),
physical_printers(PhysicalPrinter::printer_options())
{
// The following keys are handled by the UI, they do not have a counterpart in any StaticPrintConfig derived classes,
// therefore they need to be handled differently. As they have no counterpart in StaticPrintConfig, they are not being
// initialized based on PrintConfigDef(), but to empty values (zeros, empty vectors, empty strings).
//
// "compatible_printers", "compatible_printers_condition", "inherits",
// "print_settings_id", "filament_settings_id", "printer_settings_id", "printer_settings_id"
// "printer_vendor", "printer_model", "printer_variant", "default_print_profile", "default_filament_profile"
// Create the ID config keys, as they are not part of the Static print config classes.
this->prints.default_preset().config.optptr("print_settings_id", true);
this->prints.default_preset().compatible_printers_condition();
this->prints.default_preset().inherits();
this->filaments.default_preset().config.option<ConfigOptionStrings>("filament_settings_id", true)->values = { "" };
this->filaments.default_preset().compatible_printers_condition();
this->filaments.default_preset().inherits();
// Set all the nullable values to nils.
this->filaments.default_preset().config.null_nullables();
this->sla_materials.default_preset().config.optptr("sla_material_settings_id", true);
this->sla_materials.default_preset().compatible_printers_condition();
this->sla_materials.default_preset().inherits();
this->sla_prints.default_preset().config.optptr("sla_print_settings_id", true);
this->sla_prints.default_preset().config.opt_string("output_filename_format", true) = "[input_filename_base].sl1";
this->sla_prints.default_preset().compatible_printers_condition();
this->sla_prints.default_preset().inherits();
this->printers.add_default_preset(Preset::sla_printer_options(), static_cast<const SLAMaterialConfig&>(SLAFullPrintConfig::defaults()), "- default SLA -");
this->printers.preset(1).printer_technology_ref() = ptSLA;
for (size_t i = 0; i < 2; ++ i) {
// The following ugly switch is to avoid printers.preset(0) to return the edited instance, as the 0th default is the current one.
Preset &preset = this->printers.default_preset(i);
for (const char *key : {
"printer_settings_id", "printer_vendor", "printer_model", "printer_variant", "thumbnails",
//FIXME the following keys are only created here for compatibility to be able to parse legacy Printer profiles.
// These keys are converted to Physical Printer profile. After the conversion, they shall be removed.
"host_type", "print_host", "printhost_apikey", "printhost_cafile"})
preset.config.optptr(key, true);
if (i == 0) {
preset.config.optptr("default_print_profile", true);
preset.config.option<ConfigOptionStrings>("default_filament_profile", true);
} else {
preset.config.optptr("default_sla_print_profile", true);
preset.config.optptr("default_sla_material_profile", true);
}
// default_sla_material_profile
preset.inherits();
}
// Re-activate the default presets, so their "edited" preset copies will be updated with the additional configuration values above.
this->prints .select_preset(0);
this->sla_prints .select_preset(0);
this->filaments .select_preset(0);
this->sla_materials.select_preset(0);
this->printers .select_preset(0);
this->project_config.apply_only(FullPrintConfig::defaults(), s_project_options);
}
PresetBundle::PresetBundle(const PresetBundle &rhs)
{
*this = rhs;
}
PresetBundle& PresetBundle::operator=(const PresetBundle &rhs)
{
prints = rhs.prints;
sla_prints = rhs.sla_prints;
filaments = rhs.filaments;
sla_materials = rhs.sla_materials;
printers = rhs.printers;
physical_printers = rhs.physical_printers;
filament_presets = rhs.filament_presets;
project_config = rhs.project_config;
vendors = rhs.vendors;
obsolete_presets = rhs.obsolete_presets;
// Adjust Preset::vendor pointers to point to the copied vendors map.
prints .update_vendor_ptrs_after_copy(this->vendors);
sla_prints .update_vendor_ptrs_after_copy(this->vendors);
filaments .update_vendor_ptrs_after_copy(this->vendors);
sla_materials.update_vendor_ptrs_after_copy(this->vendors);
printers .update_vendor_ptrs_after_copy(this->vendors);
return *this;
}
void PresetBundle::reset(bool delete_files)
{
// Clear the existing presets, delete their respective files.
this->vendors.clear();
this->prints .reset(delete_files);
this->sla_prints .reset(delete_files);
this->filaments .reset(delete_files);
this->sla_materials.reset(delete_files);
this->printers .reset(delete_files);
this->filament_presets.clear();
this->filament_presets.emplace_back(this->filaments.get_selected_preset_name());
this->obsolete_presets.prints.clear();
this->obsolete_presets.sla_prints.clear();
this->obsolete_presets.filaments.clear();
this->obsolete_presets.sla_materials.clear();
this->obsolete_presets.printers.clear();
}
void PresetBundle::setup_directories()
{
boost::filesystem::path data_dir = boost::filesystem::path(Slic3r::data_dir());
std::initializer_list<boost::filesystem::path> paths = {
data_dir,
data_dir / "vendor",
data_dir / "cache",
data_dir / "shapes",
#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR
// Store the print/filament/printer presets into a "presets" directory.
data_dir / "presets",
data_dir / "presets" / "print",
data_dir / "presets" / "filament",
data_dir / "presets" / "sla_print",
data_dir / "presets" / "sla_material",
data_dir / "presets" / "printer",
data_dir / "presets" / "physical_printer"
#else
// Store the print/filament/printer presets at the same location as the upstream Slic3r.
data_dir / "print",
data_dir / "filament",
data_dir / "sla_print",
data_dir / "sla_material",
data_dir / "printer",
data_dir / "physical_printer"
#endif
};
for (const boost::filesystem::path &path : paths) {
boost::filesystem::path subdir = path;
subdir.make_preferred();
if (! boost::filesystem::is_directory(subdir) &&
! boost::filesystem::create_directory(subdir))
throw Slic3r::RuntimeError(std::string("Slic3r was unable to create its data directory at ") + subdir.string());
}
}
// recursively copy all files and dirs in from_dir to to_dir
static void copy_dir(const boost::filesystem::path& from_dir, const boost::filesystem::path& to_dir)
{
if(!boost::filesystem::is_directory(from_dir))
return;
// i assume to_dir.parent surely exists
if (!boost::filesystem::is_directory(to_dir))
boost::filesystem::create_directory(to_dir);
for (auto& dir_entry : boost::filesystem::directory_iterator(from_dir)) {
if (!boost::filesystem::is_directory(dir_entry.path())) {
std::string em;
CopyFileResult cfr = copy_file(dir_entry.path().string(), (to_dir / dir_entry.path().filename()).string(), em, false);
if (cfr != SUCCESS) {
BOOST_LOG_TRIVIAL(error) << "Error when copying files from " << from_dir << " to " << to_dir << ": " << em;
}
} else {
copy_dir(dir_entry.path(), to_dir / dir_entry.path().filename());
}
}
}
// Import newer configuration from alternate PrusaSlicer configuration directory.
// AppConfig from the alternate location is already loaded.
// User profiles are being merged (old files are not being deleted),
// while old vendors and cache folders are being deleted before newer are copied.
void PresetBundle::import_newer_configs(const std::string& from)
{
boost::filesystem::path data_dir = boost::filesystem::path(Slic3r::data_dir());
// Clean-up vendors from the target directory, as the existing vendors will not be referenced
// by the copied PrusaSlicer.ini
try {
boost::filesystem::remove_all(data_dir / "cache");
} catch (const std::exception &ex) {
BOOST_LOG_TRIVIAL(error) << "Error deleting old cache " << (data_dir / "cache").string() << ": " << ex.what();
}
try {
boost::filesystem::remove_all(data_dir / "vendor");
} catch (const std::exception &ex) {
BOOST_LOG_TRIVIAL(error) << "Error deleting old vendors " << (data_dir / "vendor").string() << ": " << ex.what();
}
// list of searched paths based on current directory system in setup_directories()
// do not copy cache and snapshots
boost::filesystem::path from_data_dir = boost::filesystem::path(from);
std::initializer_list<boost::filesystem::path> from_dirs= {
from_data_dir / "cache",
from_data_dir / "vendor",
from_data_dir / "shapes",
#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR
// Store the print/filament/printer presets into a "presets" directory.
data_dir / "presets" / "print",
data_dir / "presets" / "filament",
data_dir / "presets" / "sla_print",
data_dir / "presets" / "sla_material",
data_dir / "presets" / "printer",
data_dir / "presets" / "physical_printer"
#else
// Store the print/filament/printer presets at the same location as the upstream Slic3r.
from_data_dir / "print",
from_data_dir / "filament",
from_data_dir / "sla_print",
from_data_dir / "sla_material",
from_data_dir / "printer",
from_data_dir / "physical_printer"
#endif
};
// copy recursively all files
for (const boost::filesystem::path& from_dir : from_dirs) {
copy_dir(from_dir, data_dir / from_dir.filename());
}
}
PresetsConfigSubstitutions PresetBundle::load_presets(AppConfig &config, ForwardCompatibilitySubstitutionRule substitution_rule,
const PresetPreferences& preferred_selection/* = PresetPreferences()*/)
{
// First load the vendor specific system presets.
PresetsConfigSubstitutions substitutions;
std::string errors_cummulative;
std::tie(substitutions, errors_cummulative) = this->load_system_presets(substitution_rule);
const std::string dir_user_presets = data_dir()
#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR
// Store the print/filament/printer presets into a "presets" directory.
+ "/presets"
#else
// Store the print/filament/printer presets at the same location as the upstream Slic3r.
#endif
;
try {
this->prints.load_presets(dir_user_presets, "print", substitutions, substitution_rule);
} catch (const std::runtime_error &err) {
errors_cummulative += err.what();
}
try {
this->sla_prints.load_presets(dir_user_presets, "sla_print", substitutions, substitution_rule);
} catch (const std::runtime_error &err) {
errors_cummulative += err.what();
}
try {
this->filaments.load_presets(dir_user_presets, "filament", substitutions, substitution_rule);
} catch (const std::runtime_error &err) {
errors_cummulative += err.what();
}
try {
this->sla_materials.load_presets(dir_user_presets, "sla_material", substitutions, substitution_rule);
} catch (const std::runtime_error &err) {
errors_cummulative += err.what();
}
try {
this->printers.load_presets(dir_user_presets, "printer", substitutions, substitution_rule);
} catch (const std::runtime_error &err) {
errors_cummulative += err.what();
}
try {
this->physical_printers.load_printers(dir_user_presets, "physical_printer", substitutions, substitution_rule);
} catch (const std::runtime_error &err) {
errors_cummulative += err.what();
}
this->update_multi_material_filament_presets();
this->update_compatible(PresetSelectCompatibleType::Never);
if (! errors_cummulative.empty())
throw Slic3r::RuntimeError(errors_cummulative);
this->load_selections(config, preferred_selection);
return substitutions;
}
// Load system presets into this PresetBundle.
// For each vendor, there will be a single PresetBundle loaded.
std::pair<PresetsConfigSubstitutions, std::string> PresetBundle::load_system_presets(ForwardCompatibilitySubstitutionRule compatibility_rule)
{
if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSystemSilent)
// Loading system presets, don't log substitutions.
compatibility_rule = ForwardCompatibilitySubstitutionRule::EnableSilent;
else if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSilentDisableSystem)
// Loading system presets, throw on unknown option value.
compatibility_rule = ForwardCompatibilitySubstitutionRule::Disable;
// Here the vendor specific read only Config Bundles are stored.
boost::filesystem::path dir = (boost::filesystem::path(data_dir()) / "vendor").make_preferred();
PresetsConfigSubstitutions substitutions;
std::string errors_cummulative;
bool first = true;
for (auto &dir_entry : boost::filesystem::directory_iterator(dir))
if (Slic3r::is_ini_file(dir_entry)) {
std::string name = dir_entry.path().filename().string();
// Remove the .ini suffix.
name.erase(name.size() - 4);
try {
// Load the config bundle, flatten it.
if (first) {
// Reset this PresetBundle and load the first vendor config.
append(substitutions, this->load_configbundle(dir_entry.path().string(), PresetBundle::LoadSystem, compatibility_rule).first);
first = false;
} else {
// Load the other vendor configs, merge them with this PresetBundle.
// Report duplicate profiles.
PresetBundle other;
append(substitutions, other.load_configbundle(dir_entry.path().string(), PresetBundle::LoadSystem, compatibility_rule).first);
std::vector<std::string> duplicates = this->merge_presets(std::move(other));
if (! duplicates.empty()) {
errors_cummulative += "Vendor configuration file " + name + " contains the following presets with names used by other vendors: ";
for (size_t i = 0; i < duplicates.size(); ++ i) {
if (i > 0)
errors_cummulative += ", ";
errors_cummulative += duplicates[i];
}
}
}
} catch (const std::runtime_error &err) {
errors_cummulative += err.what();
errors_cummulative += "\n";
}
}
if (first) {
// No config bundle loaded, reset.
this->reset(false);
}
this->update_system_maps();
return std::make_pair(std::move(substitutions), errors_cummulative);
}
// Merge one vendor's presets with the other vendor's presets, report duplicates.
std::vector<std::string> PresetBundle::merge_presets(PresetBundle &&other)
{
this->vendors.insert(other.vendors.begin(), other.vendors.end());
std::vector<std::string> duplicate_prints = this->prints .merge_presets(std::move(other.prints), this->vendors);
std::vector<std::string> duplicate_sla_prints = this->sla_prints .merge_presets(std::move(other.sla_prints), this->vendors);
std::vector<std::string> duplicate_filaments = this->filaments .merge_presets(std::move(other.filaments), this->vendors);
std::vector<std::string> duplicate_sla_materials = this->sla_materials.merge_presets(std::move(other.sla_materials), this->vendors);
std::vector<std::string> duplicate_printers = this->printers .merge_presets(std::move(other.printers), this->vendors);
append(this->obsolete_presets.prints, std::move(other.obsolete_presets.prints));
append(this->obsolete_presets.sla_prints, std::move(other.obsolete_presets.sla_prints));
append(this->obsolete_presets.filaments, std::move(other.obsolete_presets.filaments));
append(this->obsolete_presets.sla_materials, std::move(other.obsolete_presets.sla_materials));
append(this->obsolete_presets.printers, std::move(other.obsolete_presets.printers));
append(duplicate_prints, std::move(duplicate_sla_prints));
append(duplicate_prints, std::move(duplicate_filaments));
append(duplicate_prints, std::move(duplicate_sla_materials));
append(duplicate_prints, std::move(duplicate_printers));
return duplicate_prints;
}
void PresetBundle::update_system_maps()
{
this->prints .update_map_system_profile_renamed();
this->sla_prints .update_map_system_profile_renamed();
this->filaments .update_map_system_profile_renamed();
this->sla_materials.update_map_system_profile_renamed();
this->printers .update_map_system_profile_renamed();
this->prints .update_map_alias_to_profile_name();
this->sla_prints .update_map_alias_to_profile_name();
this->filaments .update_map_alias_to_profile_name();
this->sla_materials.update_map_alias_to_profile_name();
}
static inline std::string remove_ini_suffix(const std::string &name)
{
std::string out = name;
if (boost::iends_with(out, ".ini"))
out.erase(out.end() - 4, out.end());
return out;
}
// Set the "enabled" flag for printer vendors, printer models and printer variants
// based on the user configuration.
// If the "vendor" section is missing, enable all models and variants of the particular vendor.
void PresetBundle::load_installed_printers(const AppConfig &config)
{
this->update_system_maps();
for (auto &preset : printers)
preset.set_visible_from_appconfig(config);
}
const std::string& PresetBundle::get_preset_name_by_alias( const Preset::Type& preset_type, const std::string& alias) const
{
// there are not aliases for Printers profiles
if (preset_type == Preset::TYPE_PRINTER || preset_type == Preset::TYPE_INVALID)
return alias;
const PresetCollection& presets = preset_type == Preset::TYPE_PRINT ? prints :
preset_type == Preset::TYPE_SLA_PRINT ? sla_prints :
preset_type == Preset::TYPE_FILAMENT ? filaments :
sla_materials;
return presets.get_preset_name_by_alias(alias);
}
void PresetBundle::save_changes_for_preset(const std::string& new_name, Preset::Type type,
const std::vector<std::string>& unselected_options)
{
PresetCollection& presets = type == Preset::TYPE_PRINT ? prints :
type == Preset::TYPE_SLA_PRINT ? sla_prints :
type == Preset::TYPE_FILAMENT ? filaments :
type == Preset::TYPE_SLA_MATERIAL ? sla_materials : printers;
// if we want to save just some from selected options
if (!unselected_options.empty()) {
// revert unselected options to the old values
presets.get_edited_preset().config.apply_only(presets.get_selected_preset().config, unselected_options);
}
// Save the preset into Slic3r::data_dir / presets / section_name / preset_name.ini
presets.save_current_preset(new_name);
// Mark the print & filament enabled if they are compatible with the currently selected preset.
// If saving the preset changes compatibility with other presets, keep the now incompatible dependent presets selected, however with a "red flag" icon showing that they are no more compatible.
update_compatible(PresetSelectCompatibleType::Never);
if (type == Preset::TYPE_FILAMENT) {
// synchronize the first filament presets.
set_filament_preset(0, filaments.get_selected_preset_name());
}
}
void PresetBundle::load_installed_filaments(AppConfig &config)
{
if (! config.has_section(AppConfig::SECTION_FILAMENTS)) {
// Compatibility with the PrusaSlicer 2.1.1 and older, where the filament profiles were not installable yet.
// Find all filament profiles, which are compatible with installed printers, and act as if these filament profiles
// were installed.
std::unordered_set<const Preset*> compatible_filaments;
for (const Preset &printer : printers)
if (printer.is_visible && printer.printer_technology() == ptFFF) {
const PresetWithVendorProfile printer_with_vendor_profile = printers.get_preset_with_vendor_profile(printer);
for (const Preset &filament : filaments)
if (filament.is_system && is_compatible_with_printer(filaments.get_preset_with_vendor_profile(filament), printer_with_vendor_profile))
compatible_filaments.insert(&filament);
}
// and mark these filaments as installed, therefore this code will not be executed at the next start of the application.
for (const auto &filament: compatible_filaments)
config.set(AppConfig::SECTION_FILAMENTS, filament->name, "1");
}
for (auto &preset : filaments)
preset.set_visible_from_appconfig(config);
}
void PresetBundle::load_installed_sla_materials(AppConfig &config)
{
if (! config.has_section(AppConfig::SECTION_MATERIALS)) {
std::unordered_set<const Preset*> comp_sla_materials;
// Compatibility with the PrusaSlicer 2.1.1 and older, where the SLA material profiles were not installable yet.
// Find all SLA material profiles, which are compatible with installed printers, and act as if these SLA material profiles
// were installed.
for (const Preset &printer : printers)
if (printer.is_visible && printer.printer_technology() == ptSLA) {
const PresetWithVendorProfile printer_with_vendor_profile = printers.get_preset_with_vendor_profile(printer);
for (const Preset &material : sla_materials)
if (material.is_system && is_compatible_with_printer(sla_materials.get_preset_with_vendor_profile(material), printer_with_vendor_profile))
comp_sla_materials.insert(&material);
}
// and mark these SLA materials as installed, therefore this code will not be executed at the next start of the application.
for (const auto &material: comp_sla_materials)
config.set(AppConfig::SECTION_MATERIALS, material->name, "1");
}
for (auto &preset : sla_materials)
preset.set_visible_from_appconfig(config);
}
// Load selections (current print, current filaments, current printer) from config.ini
// This is done on application start up or after updates are applied.
void PresetBundle::load_selections(AppConfig &config, const PresetPreferences& preferred_selection/* = PresetPreferences()*/)
{
// Update visibility of presets based on application vendor / model / variant configuration.
this->load_installed_printers(config);
// Update visibility of filament and sla material presets
this->load_installed_filaments(config);
this->load_installed_sla_materials(config);
// Parse the initial print / filament / printer profile names.
std::string initial_print_profile_name = remove_ini_suffix(config.get("presets", "print"));
std::string initial_sla_print_profile_name = remove_ini_suffix(config.get("presets", "sla_print"));
std::string initial_filament_profile_name = remove_ini_suffix(config.get("presets", "filament"));
std::string initial_sla_material_profile_name = remove_ini_suffix(config.get("presets", "sla_material"));
std::string initial_printer_profile_name = remove_ini_suffix(config.get("presets", "printer"));
// Activate print / filament / printer profiles from either the config,
// or from the preferred_model_id suggestion passed in by ConfigWizard.
// If the printer profile enumerated by the config are not visible, select an alternate preset.
// Do not select alternate profiles for the print / filament profiles as those presets
// will be selected by the following call of this->update_compatible(PresetSelectCompatibleType::Always).
const Preset *initial_printer = printers.find_preset(initial_printer_profile_name);
// If executed due to a Config Wizard update, preferred_printer contains the first newly installed printer, otherwise nullptr.
const Preset *preferred_printer = printers.find_system_preset_by_model_and_variant(preferred_selection.printer_model_id, preferred_selection.printer_variant);
printers.select_preset_by_name(preferred_printer ? preferred_printer->name : initial_printer_profile_name, true);
// Selects the profile, leaves it to -1 if the initial profile name is empty or if it was not found.
prints.select_preset_by_name_strict(initial_print_profile_name);
filaments.select_preset_by_name_strict(initial_filament_profile_name);
sla_prints.select_preset_by_name_strict(initial_sla_print_profile_name);
sla_materials.select_preset_by_name_strict(initial_sla_material_profile_name);
// Load the names of the other filament profiles selected for a multi-material printer.
// Load it even if the current printer technology is SLA.
// The possibly excessive filament names will be later removed with this->update_multi_material_filament_presets()
// once the FFF technology gets selected.
this->filament_presets = { filaments.get_selected_preset_name() };
for (unsigned int i = 1; i < 1000; ++ i) {
char name[64];
sprintf(name, "filament_%u", i);
if (! config.has("presets", name))
break;
this->filament_presets.emplace_back(remove_ini_suffix(config.get("presets", name)));
}
// Update visibility of presets based on their compatibility with the active printer.
// Always try to select a compatible print and filament preset to the current printer preset,
// as the application may have been closed with an active "external" preset, which does not
// exist.
this->update_compatible(PresetSelectCompatibleType::Always);
this->update_multi_material_filament_presets();
if (initial_printer != nullptr && (preferred_printer == nullptr || initial_printer == preferred_printer)) {
// Don't run the following code, as we want to activate default filament / SLA material profiles when installing and selecting a new printer.
// Only run this code if just a filament / SLA material was installed by Config Wizard for an active Printer.
auto printer_technology = printers.get_selected_preset().printer_technology();
if (printer_technology == ptFFF && ! preferred_selection.filament.empty()) {
std::string preferred_preset_name = get_preset_name_by_alias(Preset::Type::TYPE_FILAMENT, preferred_selection.filament);
if (auto it = filaments.find_preset_internal(preferred_preset_name);
it != filaments.end() && it->is_visible && it->is_compatible) {
filaments.select_preset_by_name_strict(preferred_preset_name);
this->filament_presets.front() = filaments.get_selected_preset_name();
}
} else if (printer_technology == ptSLA && ! preferred_selection.sla_material.empty()) {
std::string preferred_preset_name = get_preset_name_by_alias(Preset::Type::TYPE_SLA_MATERIAL, preferred_selection.sla_material);
if (auto it = sla_materials.find_preset_internal(preferred_preset_name);
it != sla_materials.end() && it->is_visible && it->is_compatible)
sla_materials.select_preset_by_name_strict(preferred_preset_name);
}
}
// Parse the initial physical printer name.
std::string initial_physical_printer_name = remove_ini_suffix(config.get("presets", "physical_printer"));
// Activate physical printer from the config
if (!initial_physical_printer_name.empty())
physical_printers.select_printer(initial_physical_printer_name);
}
// Export selections (current print, current filaments, current printer) into config.ini
void PresetBundle::export_selections(AppConfig &config)
{
assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() >= 1);
assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() > 1 || filaments.get_selected_preset_name() == filament_presets.front());
config.clear_section("presets");
config.set("presets", "print", prints.get_selected_preset_name());
config.set("presets", "filament", filament_presets.front());
for (unsigned i = 1; i < filament_presets.size(); ++i) {
char name[64];
sprintf(name, "filament_%u", i);
config.set("presets", name, filament_presets[i]);
}
config.set("presets", "sla_print", sla_prints.get_selected_preset_name());
config.set("presets", "sla_material", sla_materials.get_selected_preset_name());
config.set("presets", "printer", printers.get_selected_preset_name());
config.set("presets", "physical_printer", physical_printers.get_selected_full_printer_name());
}
DynamicPrintConfig PresetBundle::full_config() const
{
return (this->printers.get_edited_preset().printer_technology() == ptFFF) ?
this->full_fff_config() :
this->full_sla_config();
}
DynamicPrintConfig PresetBundle::full_config_secure() const
{
DynamicPrintConfig config = this->full_config();
//FIXME legacy, the keys should not be there after conversion to a Physical Printer profile.
config.erase("print_host");
config.erase("printhost_apikey");
config.erase("printhost_cafile");
return config;
}
DynamicPrintConfig PresetBundle::full_fff_config() const
{
DynamicPrintConfig out;
out.apply(FullPrintConfig::defaults());
out.apply(this->prints.get_edited_preset().config);
// Add the default filament preset to have the "filament_preset_id" defined.
out.apply(this->filaments.default_preset().config);
out.apply(this->printers.get_edited_preset().config);
out.apply(this->project_config);
auto *nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(out.option("nozzle_diameter"));
size_t num_extruders = nozzle_diameter->values.size();
// Collect the "compatible_printers_condition" and "inherits" values over all presets (print, filaments, printers) into a single vector.
std::vector<std::string> compatible_printers_condition;
std::vector<std::string> compatible_prints_condition;
std::vector<std::string> inherits;
compatible_printers_condition.emplace_back(this->prints.get_edited_preset().compatible_printers_condition());
inherits .emplace_back(this->prints.get_edited_preset().inherits());
if (num_extruders <= 1) {
out.apply(this->filaments.get_edited_preset().config);
compatible_printers_condition.emplace_back(this->filaments.get_edited_preset().compatible_printers_condition());
compatible_prints_condition .emplace_back(this->filaments.get_edited_preset().compatible_prints_condition());
inherits .emplace_back(this->filaments.get_edited_preset().inherits());
} else {
// Retrieve filament presets and build a single config object for them.
// First collect the filament configurations based on the user selection of this->filament_presets.
// Here this->filaments.find_preset() and this->filaments.first_visible() return the edited copy of the preset if active.
std::vector<const DynamicPrintConfig*> filament_configs;
for (const std::string &filament_preset_name : this->filament_presets)
filament_configs.emplace_back(&this->filaments.find_preset(filament_preset_name, true)->config);
while (filament_configs.size() < num_extruders)
filament_configs.emplace_back(&this->filaments.first_visible().config);
for (const DynamicPrintConfig *cfg : filament_configs) {
// The compatible_prints/printers_condition() returns a reference to configuration key, which may not yet exist.
DynamicPrintConfig &cfg_rw = *const_cast<DynamicPrintConfig*>(cfg);
compatible_printers_condition.emplace_back(Preset::compatible_printers_condition(cfg_rw));
compatible_prints_condition .emplace_back(Preset::compatible_prints_condition(cfg_rw));
inherits .emplace_back(Preset::inherits(cfg_rw));
}
// Option values to set a ConfigOptionVector from.
std::vector<const ConfigOption*> filament_opts(num_extruders, nullptr);
// loop through options and apply them to the resulting config.
for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) {
if (key == "compatible_prints" || key == "compatible_printers")
continue;
// Get a destination option.
ConfigOption *opt_dst = out.option(key, false);
if (opt_dst->is_scalar()) {
// Get an option, do not create if it does not exist.
const ConfigOption *opt_src = filament_configs.front()->option(key);
if (opt_src != nullptr)
opt_dst->set(opt_src);
} else {
// Setting a vector value from all filament_configs.
for (size_t i = 0; i < filament_opts.size(); ++ i)
filament_opts[i] = filament_configs[i]->option(key);
static_cast<ConfigOptionVectorBase*>(opt_dst)->set(filament_opts);
}
}
}
// Don't store the "compatible_printers_condition" for the printer profile, there is none.
inherits.emplace_back(this->printers.get_edited_preset().inherits());
// These value types clash between the print and filament profiles. They should be renamed.
out.erase("compatible_prints");
out.erase("compatible_prints_condition");
out.erase("compatible_printers");
out.erase("compatible_printers_condition");
out.erase("inherits");
static const char *keys[] = { "perimeter", "infill", "solid_infill", "support_material", "support_material_interface" };
for (size_t i = 0; i < sizeof(keys) / sizeof(keys[0]); ++ i) {
std::string key = std::string(keys[i]) + "_extruder";
auto *opt = dynamic_cast<ConfigOptionInt*>(out.option(key, false));
assert(opt != nullptr);
opt->value = boost::algorithm::clamp<int>(opt->value, 0, int(num_extruders));
}
out.option<ConfigOptionString >("print_settings_id", true)->value = this->prints.get_selected_preset_name();
out.option<ConfigOptionStrings>("filament_settings_id", true)->values = this->filament_presets;
out.option<ConfigOptionString >("printer_settings_id", true)->value = this->printers.get_selected_preset_name();
out.option<ConfigOptionString >("physical_printer_settings_id", true)->value = this->physical_printers.get_selected_printer_name();
// Serialize the collected "compatible_printers_condition" and "inherits" fields.
// There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored.
// The vector will not be stored if all fields are empty strings.
auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) {
bool nonempty = false;
for (const std::string &v : values)
if (! v.empty()) {
nonempty = true;
break;
}
if (nonempty)
out.set_key_value(key, new ConfigOptionStrings(std::move(values)));
};
add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_printers_condition_cummulative");
add_if_some_non_empty(std::move(compatible_prints_condition), "compatible_prints_condition_cummulative");
add_if_some_non_empty(std::move(inherits), "inherits_cummulative");
out.option<ConfigOptionEnumGeneric>("printer_technology", true)->value = ptFFF;
return out;
}
DynamicPrintConfig PresetBundle::full_sla_config() const
{
DynamicPrintConfig out;
out.apply(SLAFullPrintConfig::defaults());
out.apply(this->sla_prints.get_edited_preset().config);
out.apply(this->sla_materials.get_edited_preset().config);
out.apply(this->printers.get_edited_preset().config);
// There are no project configuration values as of now, the project_config is reserved for FFF printers.
// out.apply(this->project_config);
// Collect the "compatible_printers_condition" and "inherits" values over all presets (sla_prints, sla_materials, printers) into a single vector.
std::vector<std::string> compatible_printers_condition;
std::vector<std::string> compatible_prints_condition;
std::vector<std::string> inherits;
compatible_printers_condition.emplace_back(this->sla_prints.get_edited_preset().compatible_printers_condition());
inherits .emplace_back(this->sla_prints.get_edited_preset().inherits());
compatible_printers_condition.emplace_back(this->sla_materials.get_edited_preset().compatible_printers_condition());
compatible_prints_condition .emplace_back(this->sla_materials.get_edited_preset().compatible_prints_condition());
inherits .emplace_back(this->sla_materials.get_edited_preset().inherits());
inherits .emplace_back(this->printers.get_edited_preset().inherits());
// These two value types clash between the print and filament profiles. They should be renamed.
out.erase("compatible_printers");
out.erase("compatible_printers_condition");
out.erase("inherits");
out.option<ConfigOptionString >("sla_print_settings_id", true)->value = this->sla_prints.get_selected_preset_name();
out.option<ConfigOptionString >("sla_material_settings_id", true)->value = this->sla_materials.get_selected_preset_name();
out.option<ConfigOptionString >("printer_settings_id", true)->value = this->printers.get_selected_preset_name();
out.option<ConfigOptionString >("physical_printer_settings_id", true)->value = this->physical_printers.get_selected_printer_name();
// Serialize the collected "compatible_printers_condition" and "inherits" fields.
// There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored.
// The vector will not be stored if all fields are empty strings.
auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) {
bool nonempty = false;
for (const std::string &v : values)
if (! v.empty()) {
nonempty = true;
break;
}
if (nonempty)
out.set_key_value(key, new ConfigOptionStrings(std::move(values)));
};
add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_printers_condition_cummulative");
add_if_some_non_empty(std::move(compatible_prints_condition), "compatible_prints_condition_cummulative");
add_if_some_non_empty(std::move(inherits), "inherits_cummulative");
out.option<ConfigOptionEnumGeneric>("printer_technology", true)->value = ptSLA;
return out;
}
// Load an external config file containing the print, filament and printer presets.
// Instead of a config file, a G-code may be loaded containing the full set of parameters.
// In the future the configuration will likely be read from an AMF file as well.
// If the file is loaded successfully, its print / filament / printer profiles will be activated.
ConfigSubstitutions PresetBundle::load_config_file(const std::string &path, ForwardCompatibilitySubstitutionRule compatibility_rule)
{
if (is_gcode_file(path)) {
DynamicPrintConfig config;
config.apply(FullPrintConfig::defaults());
ConfigSubstitutions config_substitutions = config.load_from_gcode_file(path, compatibility_rule);
Preset::normalize(config);
load_config_file_config(path, true, std::move(config));
return config_substitutions;
}
// 1) Try to load the config file into a boost property tree.
boost::property_tree::ptree tree;
try {
boost::nowide::ifstream ifs(path);
boost::property_tree::read_ini(ifs, tree);
} catch (const std::ifstream::failure &err) {
throw Slic3r::RuntimeError(std::string("The Config Bundle cannot be loaded: ") + path + "\n\tReason: " + err.what());
} catch (const boost::property_tree::file_parser_error &err) {
throw Slic3r::RuntimeError(format("Failed loading the Config Bundle \"%1%\": %2% at line %3%",
err.filename(), err.message(), err.line()));
} catch (const std::runtime_error &err) {
throw Slic3r::RuntimeError(std::string("Failed loading the preset file: ") + path + "\n\tReason: " + err.what());
}
// 2) Continue based on the type of the configuration file.
ConfigFileType config_file_type = guess_config_file_type(tree);
ConfigSubstitutions config_substitutions;
try {
switch (config_file_type) {
case CONFIG_FILE_TYPE_UNKNOWN:
throw Slic3r::RuntimeError(std::string("Unknown configuration file type: ") + path);
case CONFIG_FILE_TYPE_APP_CONFIG:
throw Slic3r::RuntimeError(std::string("Invalid configuration file: ") + path + ". This is an application config file.");
case CONFIG_FILE_TYPE_CONFIG:
{
// Initialize a config from full defaults.
DynamicPrintConfig config;
config.apply(FullPrintConfig::defaults());
config_substitutions = config.load(tree, compatibility_rule);
Preset::normalize(config);
load_config_file_config(path, true, std::move(config));
return config_substitutions;
}
case CONFIG_FILE_TYPE_CONFIG_BUNDLE:
return load_config_file_config_bundle(path, tree, compatibility_rule);
}
} catch (const ConfigurationError &e) {
throw Slic3r::RuntimeError(format("Invalid configuration file %1%: %2%", path, e.what()));
}
// This shall never happen. Suppres compiler warnings.
assert(false);
return ConfigSubstitutions{};
}
// Load a config file from a boost property_tree. This is a private method called from load_config_file.
// is_external == false on if called from ConfigWizard
void PresetBundle::load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config)
{
PrinterTechnology printer_technology = Preset::printer_technology(config);
// The "compatible_printers" field should not have been exported into a config.ini or a G-code anyway,
// but some of the alpha versions of Slic3r did.
{
ConfigOption *opt_compatible = config.optptr("compatible_printers");
if (opt_compatible != nullptr) {
assert(opt_compatible->type() == coStrings);
if (opt_compatible->type() == coStrings)
static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear();
}
}
size_t num_extruders = (printer_technology == ptFFF) ?
std::min(config.option<ConfigOptionFloats>("nozzle_diameter" )->values.size(),
config.option<ConfigOptionFloats>("filament_diameter")->values.size()) :
// 1 SLA material
1;
// Make a copy of the "compatible_printers_condition_cummulative" and "inherits_cummulative" vectors, which
// accumulate values over all presets (print, filaments, printers).
// These values will be distributed into their particular presets when loading.
std::vector<std::string> compatible_printers_condition_values = std::move(config.option<ConfigOptionStrings>("compatible_printers_condition_cummulative", true)->values);
std::vector<std::string> compatible_prints_condition_values = std::move(config.option<ConfigOptionStrings>("compatible_prints_condition_cummulative", true)->values);
std::vector<std::string> inherits_values = std::move(config.option<ConfigOptionStrings>("inherits_cummulative", true)->values);
std::string &compatible_printers_condition = Preset::compatible_printers_condition(config);
std::string &compatible_prints_condition = Preset::compatible_prints_condition(config);
std::string &inherits = Preset::inherits(config);
compatible_printers_condition_values.resize(num_extruders + 2, std::string());
compatible_prints_condition_values.resize(num_extruders, std::string());
inherits_values.resize(num_extruders + 2, std::string());
// The "default_filament_profile" will be later extracted into the printer profile.
switch (printer_technology) {
case ptFFF:
config.option<ConfigOptionString>("default_print_profile", true);
config.option<ConfigOptionStrings>("default_filament_profile", true);
break;
case ptSLA:
config.option<ConfigOptionString>("default_sla_print_profile", true);
config.option<ConfigOptionString>("default_sla_material_profile", true);
break;
default: break;
}
// 1) Create a name from the file name.
// Keep the suffix (.ini, .gcode, .amf, .3mf etc) to differentiate it from the normal profiles.
std::string name = is_external ? boost::filesystem::path(name_or_path).filename().string() : name_or_path;
// 2) If the loading succeeded, split and load the config into print / filament / printer settings.
// First load the print and printer presets.
auto load_preset =
[&config, &inherits, &inherits_values,
&compatible_printers_condition, &compatible_printers_condition_values,
&compatible_prints_condition, &compatible_prints_condition_values,
is_external, &name, &name_or_path]
(PresetCollection &presets, size_t idx, const std::string &key) {
// Split the "compatible_printers_condition" and "inherits" values one by one from a single vector to the print & printer profiles.
inherits = inherits_values[idx];
compatible_printers_condition = compatible_printers_condition_values[idx];
if (idx > 0 && idx - 1 < compatible_prints_condition_values.size())
compatible_prints_condition = compatible_prints_condition_values[idx - 1];
if (is_external)
presets.load_external_preset(name_or_path, name, config.opt_string(key, true), config);
else
presets.load_preset(presets.path_from_name(name), name, config).save();
};
switch (Preset::printer_technology(config)) {
case ptFFF:
{
load_preset(this->prints, 0, "print_settings_id");
load_preset(this->printers, num_extruders + 1, "printer_settings_id");
// 3) Now load the filaments. If there are multiple filament presets, split them and load them.
auto old_filament_profile_names = config.option<ConfigOptionStrings>("filament_settings_id", true);
old_filament_profile_names->values.resize(num_extruders, std::string());
if (num_extruders <= 1) {
// Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets.
inherits = inherits_values[1];
compatible_printers_condition = compatible_printers_condition_values[1];
compatible_prints_condition = compatible_prints_condition_values.front();
Preset *loaded = nullptr;
if (is_external)
loaded = this->filaments.load_external_preset(name_or_path, name, old_filament_profile_names->values.front(), config).first;
else {
// called from Config Wizard.
loaded= &this->filaments.load_preset(this->filaments.path_from_name(name), name, config);
loaded->save();
}
this->filament_presets.clear();
this->filament_presets.emplace_back(loaded->name);
} else {
assert(is_external);
// Split the filament presets, load each of them separately.
std::vector<DynamicPrintConfig> configs(num_extruders, this->filaments.default_preset().config);
// loop through options and scatter them into configs.
for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) {
const ConfigOption *other_opt = config.option(key);
if (other_opt == nullptr)
continue;
if (other_opt->is_scalar()) {
for (size_t i = 0; i < configs.size(); ++ i)
configs[i].option(key, false)->set(other_opt);
} else if (key != "compatible_printers" && key != "compatible_prints") {
for (size_t i = 0; i < configs.size(); ++ i)
static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set_at(other_opt, 0, i);
}
}
// Load the configs into this->filaments and make them active.
this->filament_presets = std::vector<std::string>(configs.size());
// To avoid incorrect selection of the first filament preset (means a value of Preset->m_idx_selected)
// in a case when next added preset take a place of previosly selected preset,
// we should add presets from last to first
bool any_modified = false;
for (int i = (int)configs.size()-1; i >= 0; i--) {
DynamicPrintConfig &cfg = configs[i];
// Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets.
cfg.opt_string("compatible_printers_condition", true) = compatible_printers_condition_values[i + 1];
cfg.opt_string("compatible_prints_condition", true) = compatible_prints_condition_values[i];
cfg.opt_string("inherits", true) = inherits_values[i + 1];
// Load all filament presets, but only select the first one in the preset dialog.
auto [loaded, modified] = this->filaments.load_external_preset(name_or_path, name,
(i < int(old_filament_profile_names->values.size())) ? old_filament_profile_names->values[i] : "",
std::move(cfg),
i == 0 ?
PresetCollection::LoadAndSelect::Always :
any_modified ?
PresetCollection::LoadAndSelect::Never :
PresetCollection::LoadAndSelect::OnlyIfModified);
any_modified |= modified;
this->filament_presets[i] = loaded->name;
}
}
// 4) Load the project config values (the per extruder wipe matrix etc).
this->project_config.apply_only(config, s_project_options);
break;
}
case ptSLA:
load_preset(this->sla_prints, 0, "sla_print_settings_id");
load_preset(this->sla_materials, 1, "sla_material_settings_id");
load_preset(this->printers, 2, "printer_settings_id");
break;
default:
break;
}
this->update_compatible(PresetSelectCompatibleType::Never);
const std::string &physical_printer = config.option<ConfigOptionString>("physical_printer_settings_id", true)->value;
if (this->printers.get_edited_preset().is_external || physical_printer.empty()) {
this->physical_printers.unselect_printer();
} else {
// Activate the physical printer profile if possible.
PhysicalPrinter *pp = this->physical_printers.find_printer(physical_printer, true);
if (pp != nullptr && std::find(pp->preset_names.begin(), pp->preset_names.end(), this->printers.get_edited_preset().name) != pp->preset_names.end())
this->physical_printers.select_printer(pp->name, this->printers.get_edited_preset().name);
else
this->physical_printers.unselect_printer();
}
}
// Load the active configuration of a config bundle from a boost property_tree. This is a private method called from load_config_file.
ConfigSubstitutions PresetBundle::load_config_file_config_bundle(
const std::string &path, const boost::property_tree::ptree &tree, ForwardCompatibilitySubstitutionRule compatibility_rule)
{
// 1) Load the config bundle into a temp data.
PresetBundle tmp_bundle;
// Load the config bundle, but don't save the loaded presets to user profile directory, as only the presets marked as active in the loaded preset bundle
// will be loaded into the master PresetBundle and activated.
auto [presets_substitutions, presets_imported] = tmp_bundle.load_configbundle(path, {}, compatibility_rule);
UNUSED(presets_imported);
std::string bundle_name = std::string(" - ") + boost::filesystem::path(path).filename().string();
// 2) Extract active configs from the config bundle, copy them and activate them in this bundle.
ConfigSubstitutions config_substitutions;
auto load_one = [&path, &bundle_name, &presets_substitutions = presets_substitutions, &config_substitutions](
PresetCollection &collection_dst, PresetCollection &collection_src, const std::string &preset_name_src, bool activate) -> std::string {
// If there are substitutions reported for this preset, move them to config_substitutions.
if (auto it = std::find_if(presets_substitutions.begin(), presets_substitutions.end(), [&preset_name_src](const PresetConfigSubstitutions& subs){ return subs.preset_name == preset_name_src; });
it != presets_substitutions.end() && ! it->substitutions.empty())
append(config_substitutions, std::move(it->substitutions));
Preset *preset_src = collection_src.find_preset(preset_name_src, false);
Preset *preset_dst = collection_dst.find_preset(preset_name_src, false);
assert(preset_src != nullptr);
std::string preset_name_dst;
if (preset_dst != nullptr && preset_dst->is_default) {
// No need to copy a default preset, it always exists in collection_dst.
if (activate)
collection_dst.select_preset(0);
return preset_name_src;
} else if (preset_dst != nullptr && preset_src->config == preset_dst->config) {
// Don't save as the config exists in the current bundle and its content is the same.
return preset_name_src;
} else {
// Generate a new unique name.
preset_name_dst = preset_name_src + bundle_name;
Preset *preset_dup = nullptr;
for (size_t i = 1; (preset_dup = collection_dst.find_preset(preset_name_dst, false)) != nullptr; ++ i) {
if (preset_src->config == preset_dup->config)
// The preset has been already copied into collection_dst.
return preset_name_dst;
// Try to generate another name.
char buf[64];
sprintf(buf, " (%d)", (int)i);
preset_name_dst = preset_name_src + buf + bundle_name;
}
}
assert(! preset_name_dst.empty());
// Save preset_src->config into collection_dst under preset_name_dst.
// The "compatible_printers" field should not have been exported into a config.ini or a G-code anyway,
// but some of the alpha versions of Slic3r did.
ConfigOption *opt_compatible = preset_src->config.optptr("compatible_printers");
if (opt_compatible != nullptr) {
assert(opt_compatible->type() == coStrings);
if (opt_compatible->type() == coStrings)
static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear();
}
(collection_dst.type() == Preset::TYPE_FILAMENT ?
collection_dst.load_preset(path, preset_name_dst, preset_src->config, activate) :
// Only move the source config for non filament profiles, as single filament profile may be referenced multiple times.
collection_dst.load_preset(path, preset_name_dst, std::move(preset_src->config), activate))
.is_external = true;
return preset_name_dst;
};
load_one(this->prints, tmp_bundle.prints, tmp_bundle.prints .get_selected_preset_name(), true);
load_one(this->sla_prints, tmp_bundle.sla_prints, tmp_bundle.sla_prints .get_selected_preset_name(), true);
load_one(this->filaments, tmp_bundle.filaments, tmp_bundle.filaments .get_selected_preset_name(), true);
load_one(this->sla_materials, tmp_bundle.sla_materials, tmp_bundle.sla_materials.get_selected_preset_name(), true);
load_one(this->printers, tmp_bundle.printers, tmp_bundle.printers .get_selected_preset_name(), true);
this->update_multi_material_filament_presets();
for (size_t i = 1; i < std::min(tmp_bundle.filament_presets.size(), this->filament_presets.size()); ++ i)
this->filament_presets[i] = load_one(this->filaments, tmp_bundle.filaments, tmp_bundle.filament_presets[i], false);
this->update_compatible(PresetSelectCompatibleType::Never);
sort_remove_duplicates(config_substitutions);
return config_substitutions;
}
// Process the Config Bundle loaded as a Boost property tree.
// For each print, filament and printer preset (group defined by group_name), apply the inherited presets.
// The presets starting with '*' are considered non-terminal and they are
// removed through the flattening process by this function.
// This function will never fail, but it will produce error messages through boost::log.
// system_profiles will not be flattened, and they will be kept inside the "inherits" field
static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const std::string &group_name, const std::vector<std::string> &system_profiles)
{
namespace pt = boost::property_tree;
// 1) For the group given by group_name, initialize the presets.
struct Prst {
Prst(const std::string &name, pt::ptree *node) : name(name), node(node) {}
// Name of this preset. If the name starts with '*', it is an intermediate preset,
// which will not make it into the result.
const std::string name;
// Link to the source boost property tree node, owned by tree.
pt::ptree *node;
// Link to the presets, from which this preset inherits.
std::vector<Prst*> inherits;
// Link to the presets, for which this preset is a direct parent.
std::vector<Prst*> parent_of;
// When running the Kahn's Topological sorting algorithm, this counter is decreased from inherits.size() to zero.
// A cycle is indicated, if the number does not drop to zero after the Kahn's algorithm finishes.
size_t num_incoming_edges_left = 0;
// Sorting by the name, to be used when inserted into std::set.
bool operator==(const Prst &rhs) const { return this->name == rhs.name; }
bool operator< (const Prst &rhs) const { return this->name < rhs.name; }
};
// Find the presets, store them into a std::map, addressed by their names.
std::set<Prst> presets;
std::string group_name_preset = group_name + ":";
for (auto §ion : tree)
if (boost::starts_with(section.first, group_name_preset) && section.first.size() > group_name_preset.size())
presets.emplace(section.first.substr(group_name_preset.size()), §ion.second);
// Fill in the "inherits" and "parent_of" members, report invalid inheritance fields.
for (const Prst &prst : presets) {
// Parse the list of comma separated values, possibly enclosed in quotes.
std::vector<std::string> inherits_names;
std::vector<std::string> inherits_system;
if (Slic3r::unescape_strings_cstyle(prst.node->get<std::string>("inherits", ""), inherits_names)) {
// Resolve the inheritance by name.
std::vector<Prst*> &inherits_nodes = const_cast<Prst&>(prst).inherits;
for (const std::string &node_name : inherits_names) {
auto it_system = std::lower_bound(system_profiles.begin(), system_profiles.end(), node_name);
if (it_system != system_profiles.end() && *it_system == node_name) {
// Loading a user config budnle, this preset is derived from a system profile.
inherits_system.emplace_back(node_name);
} else {
auto it = presets.find(Prst(node_name, nullptr));
if (it == presets.end())
BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits an unknown preset \"" << node_name << "\"";
else {
inherits_nodes.emplace_back(const_cast<Prst*>(&(*it)));
inherits_nodes.back()->parent_of.emplace_back(const_cast<Prst*>(&prst));
}
}
}
} else {
BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has an invalid \"inherits\" field";
}
// Remove the "inherits" key, it has no meaning outside of the config bundle.
const_cast<pt::ptree*>(prst.node)->erase("inherits");
if (! inherits_system.empty()) {
// Loaded a user config bundle, where a profile inherits a system profile.
// User profile should be derived from a single system profile only.
assert(inherits_system.size() == 1);
if (inherits_system.size() > 1)
BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits from more than single system preset";
prst.node->put("inherits", Slic3r::escape_string_cstyle(inherits_system.front()));
}
}
// 2) Create a linear ordering for the directed acyclic graph of preset inheritance.
// https://en.wikipedia.org/wiki/Topological_sorting
// Kahn's algorithm.
std::vector<Prst*> sorted;
{
// Initialize S with the set of all nodes with no incoming edge.
std::deque<Prst*> S;
for (const Prst &prst : presets)
if (prst.inherits.empty())
S.emplace_back(const_cast<Prst*>(&prst));
else
const_cast<Prst*>(&prst)->num_incoming_edges_left = prst.inherits.size();
while (! S.empty()) {
Prst *n = S.front();
S.pop_front();
sorted.emplace_back(n);
for (Prst *m : n->parent_of) {
assert(m->num_incoming_edges_left > 0);
if (-- m->num_incoming_edges_left == 0) {
// We have visited all parents of m.
S.emplace_back(m);
}
}
}
if (sorted.size() < presets.size()) {
for (const Prst &prst : presets)
if (prst.num_incoming_edges_left)
BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has cyclic dependencies";
}
}
// Apply the dependencies in their topological ordering.
for (Prst *prst : sorted) {
// Merge the preset nodes in their order of application.
// Iterate in a reverse order, so the last change will be placed first in merged.
for (auto it_inherits = prst->inherits.rbegin(); it_inherits != prst->inherits.rend(); ++ it_inherits)
for (auto it = (*it_inherits)->node->begin(); it != (*it_inherits)->node->end(); ++ it)
if (it->first == "renamed_from") {
// Don't inherit "renamed_from" flag, it does not make sense. The "renamed_from" flag only makes sense for a concrete preset.
if (boost::starts_with((*it_inherits)->name, "*"))
BOOST_LOG_TRIVIAL(error) << boost::format("Nonpublic intermediate preset %1% contains a \"renamed_from\" field, which is ignored") % (*it_inherits)->name;
} else if (prst->node->find(it->first) == prst->node->not_found())
prst->node->add_child(it->first, it->second);
}
// Remove the "internal" presets from the ptree. These presets are marked with '*'.
group_name_preset += '*';
for (auto it_section = tree.begin(); it_section != tree.end(); ) {
if (boost::starts_with(it_section->first, group_name_preset) && it_section->first.size() > group_name_preset.size())
// Remove the "internal" preset from the ptree.
it_section = tree.erase(it_section);
else
// Keep the preset.
++ it_section;
}
}
// preset_bundle is set when loading user config bundles, which must not overwrite the system profiles.
static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const PresetBundle *preset_bundle)
{
flatten_configbundle_hierarchy(tree, "print", preset_bundle ? preset_bundle->prints.system_preset_names() : std::vector<std::string>());
flatten_configbundle_hierarchy(tree, "filament", preset_bundle ? preset_bundle->filaments.system_preset_names() : std::vector<std::string>());
flatten_configbundle_hierarchy(tree, "sla_print", preset_bundle ? preset_bundle->sla_prints.system_preset_names() : std::vector<std::string>());
flatten_configbundle_hierarchy(tree, "sla_material", preset_bundle ? preset_bundle->sla_materials.system_preset_names() : std::vector<std::string>());
flatten_configbundle_hierarchy(tree, "printer", preset_bundle ? preset_bundle->printers.system_preset_names() : std::vector<std::string>());
}
// Load a config bundle file, into presets and store the loaded presets into separate files
// of the local configuration directory.
std::pair<PresetsConfigSubstitutions, size_t> PresetBundle::load_configbundle(
const std::string &path, LoadConfigBundleAttributes flags, ForwardCompatibilitySubstitutionRule compatibility_rule)
{
// Enable substitutions for user config bundle, throw an exception when loading a system profile.
ConfigSubstitutionContext substitution_context { compatibility_rule };
PresetsConfigSubstitutions substitutions;
if (flags.has(LoadConfigBundleAttribute::ResetUserProfile) || flags.has(LoadConfigBundleAttribute::LoadSystem))
// Reset this bundle, delete user profile files if SaveImported.
this->reset(flags.has(LoadConfigBundleAttribute::SaveImported));
// 1) Read the complete config file into a boost::property_tree.
namespace pt = boost::property_tree;
pt::ptree tree;
{
boost::nowide::ifstream ifs(path);
try {
pt::read_ini(ifs, tree);
} catch (const boost::property_tree::ini_parser::ini_parser_error &err) {
throw Slic3r::RuntimeError(format("Failed loading config bundle \"%1%\"\nError: \"%2%\" at line %3%", path, err.message(), err.line()).c_str());
}
}
const VendorProfile *vendor_profile = nullptr;
if (flags.has(LoadConfigBundleAttribute::LoadSystem) || flags.has(LoadConfigBundleAttribute::LoadVendorOnly)) {
auto vp = VendorProfile::from_ini(tree, path);
if (vp.models.size() == 0) {
BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No printer model defined.") % path;
return std::make_pair(PresetsConfigSubstitutions{}, 0);
} else if (vp.num_variants() == 0) {
BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No printer variant defined") % path;
return std::make_pair(PresetsConfigSubstitutions{}, 0);
}
vendor_profile = &this->vendors.insert({vp.id, vp}).first->second;
}
if (flags.has(LoadConfigBundleAttribute::LoadVendorOnly))
return std::make_pair(PresetsConfigSubstitutions{}, 0);
// 1.5) Flatten the config bundle by applying the inheritance rules. Internal profiles (with names starting with '*') are removed.
// If loading a user config bundle, do not flatten with the system profiles, but keep the "inherits" flag intact.
flatten_configbundle_hierarchy(tree, flags.has(LoadConfigBundleAttribute::LoadSystem) ? nullptr : this);
// 2) Parse the property_tree, extract the active preset names and the profiles, save them into local config files.
// Parse the obsolete preset names, to be deleted when upgrading from the old configuration structure.
std::vector<std::string> loaded_prints;
std::vector<std::string> loaded_filaments;
std::vector<std::string> loaded_sla_prints;
std::vector<std::string> loaded_sla_materials;
std::vector<std::string> loaded_printers;
std::vector<std::string> loaded_physical_printers;
std::string active_print;
std::vector<std::string> active_filaments;
std::string active_sla_print;
std::string active_sla_material;
std::string active_printer;
std::string active_physical_printer;
size_t presets_loaded = 0;
size_t ph_printers_loaded = 0;
for (const auto §ion : tree) {
PresetCollection *presets = nullptr;
std::string preset_name;
PhysicalPrinterCollection *ph_printers = nullptr;
std::string ph_printer_name;
if (boost::starts_with(section.first, "print:")) {
presets = &this->prints;
preset_name = section.first.substr(6);
} else if (boost::starts_with(section.first, "filament:")) {
presets = &this->filaments;
preset_name = section.first.substr(9);
} else if (boost::starts_with(section.first, "sla_print:")) {
presets = &this->sla_prints;
preset_name = section.first.substr(10);
} else if (boost::starts_with(section.first, "sla_material:")) {
presets = &this->sla_materials;
preset_name = section.first.substr(13);
} else if (boost::starts_with(section.first, "printer:")) {
presets = &this->printers;
preset_name = section.first.substr(8);
} else if (boost::starts_with(section.first, "physical_printer:")) {
ph_printers = &this->physical_printers;
ph_printer_name = section.first.substr(17);
} else if (section.first == "presets") {
// Load the names of the active presets.
for (auto &kvp : section.second) {
if (kvp.first == "print") {
active_print = kvp.second.data();
} else if (boost::starts_with(kvp.first, "filament")) {
int idx = 0;
if (kvp.first == "filament" || sscanf(kvp.first.c_str(), "filament_%d", &idx) == 1) {
if (int(active_filaments.size()) <= idx)
active_filaments.resize(idx + 1, std::string());
active_filaments[idx] = kvp.second.data();
}
} else if (kvp.first == "sla_print") {
active_sla_print = kvp.second.data();
} else if (kvp.first == "sla_material") {
active_sla_material = kvp.second.data();
} else if (kvp.first == "printer") {
active_printer = kvp.second.data();
} else if (kvp.first == "physical_printer") {
active_physical_printer = kvp.second.data();
}
}
} else if (section.first == "obsolete_presets") {
// Parse the names of obsolete presets. These presets will be deleted from user's
// profile directory on installation of this vendor preset.
for (auto &kvp : section.second) {
std::vector<std::string> *dst = nullptr;
if (kvp.first == "print")
dst = &this->obsolete_presets.prints;
else if (kvp.first == "filament")
dst = &this->obsolete_presets.filaments;
else if (kvp.first == "sla_print")
dst = &this->obsolete_presets.sla_prints;
else if (kvp.first == "sla_material")
dst = &this->obsolete_presets.sla_materials;
else if (kvp.first == "printer")
dst = &this->obsolete_presets.printers;
if (dst)
unescape_strings_cstyle(kvp.second.data(), *dst);
}
} else if (section.first == "settings") {
// Load the settings.
for (auto &kvp : section.second) {
if (kvp.first == "autocenter") {
}
}
} else
// Ignore an unknown section.
continue;
if (presets != nullptr) {
// Load the print, filament or printer preset.
const DynamicPrintConfig *default_config = nullptr;
DynamicPrintConfig config;
std::string alias_name;
std::vector<std::string> renamed_from;
try {
auto parse_config_section = [§ion, &alias_name, &renamed_from, &substitution_context, &path](DynamicPrintConfig &config) {
substitution_context.substitutions.clear();
for (auto &kvp : section.second) {
if (kvp.first == "alias")
alias_name = kvp.second.data();
else if (kvp.first == "renamed_from") {
if (! unescape_strings_cstyle(kvp.second.data(), renamed_from)) {
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The preset \"" <<
section.first << "\" contains invalid \"renamed_from\" key, which is being ignored.";
}
}
// Throws on parsing error. For system presets, no substituion is being done, but an exception is thrown.
config.set_deserialize(kvp.first, kvp.second.data(), substitution_context);
}
};
if (presets == &this->printers) {
// Select the default config based on the printer_technology field extracted from kvp.
DynamicPrintConfig config_src;
parse_config_section(config_src);
default_config = &presets->default_preset_for(config_src).config;
config = *default_config;
config.apply(config_src);
} else {
default_config = &presets->default_preset().config;
config = *default_config;
parse_config_section(config);
}
} catch (const ConfigurationError &e) {
throw ConfigurationError(format("Invalid configuration bundle \"%1%\", section [%2%]: ", path, section.first) + e.what());
}
Preset::normalize(config);
// Report configuration fields, which are misplaced into a wrong group.
std::string incorrect_keys = Preset::remove_invalid_keys(config, *default_config);
if (! incorrect_keys.empty())
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
section.first << "\" contains the following incorrect keys: " << incorrect_keys << ", which were removed";
if (flags.has(LoadConfigBundleAttribute::LoadSystem) && presets == &printers) {
// Filter out printer presets, which are not mentioned in the vendor profile.
// These presets are considered not installed.
auto printer_model = config.opt_string("printer_model");
if (printer_model.empty()) {
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
section.first << "\" defines no printer model, it will be ignored.";
continue;
}
auto printer_variant = config.opt_string("printer_variant");
if (printer_variant.empty()) {
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
section.first << "\" defines no printer variant, it will be ignored.";
continue;
}
auto it_model = std::find_if(vendor_profile->models.cbegin(), vendor_profile->models.cend(),
[&](const VendorProfile::PrinterModel &m) { return m.id == printer_model; }
);
if (it_model == vendor_profile->models.end()) {
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
section.first << "\" defines invalid printer model \"" << printer_model << "\", it will be ignored.";
continue;
}
auto it_variant = it_model->variant(printer_variant);
if (it_variant == nullptr) {
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
section.first << "\" defines invalid printer variant \"" << printer_variant << "\", it will be ignored.";
continue;
}
const Preset *preset_existing = presets->find_preset(section.first, false);
if (preset_existing != nullptr) {
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
section.first << "\" has already been loaded from another Confing Bundle.";
continue;
}
} else if (! flags.has(LoadConfigBundleAttribute::LoadSystem)) {
// This is a user config bundle.
const Preset *existing = presets->find_preset(preset_name, false);
if (existing != nullptr) {
if (existing->is_system) {
assert(existing->vendor != nullptr);
BOOST_LOG_TRIVIAL(error) << "Error in a user provided Config Bundle \"" << path << "\": The " << presets->name() << " preset \"" <<
existing->name << "\" is a system preset of vendor " << existing->vendor->name << " and it will be ignored.";
continue;
} else {
assert(existing->vendor == nullptr);
BOOST_LOG_TRIVIAL(trace) << "A " << presets->name() << " preset \"" << existing->name << "\" was overwritten with a preset from user Config Bundle \"" << path << "\"";
}
} else {
BOOST_LOG_TRIVIAL(trace) << "A new " << presets->name() << " preset \"" << preset_name << "\" was imported from user Config Bundle \"" << path << "\"";
}
}
// Decide a full path to this .ini file.
auto file_name = boost::algorithm::iends_with(preset_name, ".ini") ? preset_name : preset_name + ".ini";
auto file_path = (boost::filesystem::path(data_dir())
#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR
// Store the print/filament/printer presets into a "presets" directory.
/ "presets"
#else
// Store the print/filament/printer presets at the same location as the upstream Slic3r.
#endif
/ presets->section_name() / file_name).make_preferred();
// Load the preset into the list of presets, save it to disk.
Preset &loaded = presets->load_preset(file_path.string(), preset_name, std::move(config), false);
if (flags.has(LoadConfigBundleAttribute::SaveImported))
loaded.save();
if (flags.has(LoadConfigBundleAttribute::LoadSystem)) {
loaded.is_system = true;
loaded.vendor = vendor_profile;
}
// Derive the profile logical name aka alias from the preset name if the alias was not stated explicitely.
if (alias_name.empty()) {
size_t end_pos = preset_name.find_first_of("@");
if (end_pos != std::string::npos) {
alias_name = preset_name.substr(0, end_pos);
if (renamed_from.empty())
// Add the preset name with the '@' character removed into the "renamed_from" list.
renamed_from.emplace_back(alias_name + preset_name.substr(end_pos + 1));
boost::trim_right(alias_name);
}
}
if (alias_name.empty())
loaded.alias = preset_name;
else
loaded.alias = std::move(alias_name);
loaded.renamed_from = std::move(renamed_from);
if (! substitution_context.empty())
substitutions.push_back({
preset_name, presets->type(), PresetConfigSubstitutions::Source::ConfigBundle,
std::string(), std::move(substitution_context.substitutions) });
++ presets_loaded;
}
if (ph_printers != nullptr) {
// Load the physical printer
const DynamicPrintConfig& default_config = ph_printers->default_config();
DynamicPrintConfig config = default_config;
substitution_context.substitutions.clear();
try {
for (auto& kvp : section.second)
config.set_deserialize(kvp.first, kvp.second.data(), substitution_context);
} catch (const ConfigurationError &e) {
throw ConfigurationError(format("Invalid configuration bundle \"%1%\", section [%2%]: ", path, section.first) + e.what());
}
// Report configuration fields, which are misplaced into a wrong group.
std::string incorrect_keys = Preset::remove_invalid_keys(config, default_config);
if (!incorrect_keys.empty())
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The physical printer \"" <<
section.first << "\" contains the following incorrect keys: " << incorrect_keys << ", which were removed";
const PhysicalPrinter* ph_printer_existing = ph_printers->find_printer(ph_printer_name, false);
if (ph_printer_existing != nullptr) {
BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The physical printer \"" <<
section.first << "\" has already been loaded from another Confing Bundle.";
continue;
}
// Decide a full path to this .ini file.
auto file_name = boost::algorithm::iends_with(ph_printer_name, ".ini") ? ph_printer_name : ph_printer_name + ".ini";
auto file_path = (boost::filesystem::path(data_dir())
#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR
// Store the physical printers into a "presets" directory.
/ "presets"
#else
// Store the physical printers at the same location as the upstream Slic3r.
#endif
/ "physical_printer" / file_name).make_preferred();
// Load the preset into the list of presets, save it to disk.
ph_printers->load_printer(file_path.string(), ph_printer_name, std::move(config), false, flags.has(LoadConfigBundleAttribute::SaveImported));
if (! substitution_context.empty())
substitutions.push_back({
ph_printer_name, Preset::TYPE_PHYSICAL_PRINTER, PresetConfigSubstitutions::Source::ConfigBundle,
std::string(), std::move(substitution_context.substitutions) });
++ ph_printers_loaded;
}
}
// 3) Activate the presets and physical printer if any exists.
if (! flags.has(LoadConfigBundleAttribute::LoadSystem)) {
if (! active_print.empty())
prints.select_preset_by_name(active_print, true);
if (! active_sla_print.empty())
sla_prints.select_preset_by_name(active_sla_print, true);
if (! active_sla_material.empty())
sla_materials.select_preset_by_name(active_sla_material, true);
if (! active_printer.empty())
printers.select_preset_by_name(active_printer, true);
if (! active_physical_printer.empty())
physical_printers.select_printer(active_physical_printer, active_printer);
// Activate the first filament preset.
if (! active_filaments.empty() && ! active_filaments.front().empty())
filaments.select_preset_by_name(active_filaments.front(), true);
this->update_multi_material_filament_presets();
for (size_t i = 0; i < std::min(this->filament_presets.size(), active_filaments.size()); ++ i)
this->filament_presets[i] = filaments.find_preset(active_filaments[i], true)->name;
this->update_compatible(PresetSelectCompatibleType::Never);
}
return std::make_pair(std::move(substitutions), presets_loaded + ph_printers_loaded);
}
void PresetBundle::update_multi_material_filament_presets()
{
if (printers.get_edited_preset().printer_technology() != ptFFF)
return;
// Verify and select the filament presets.
auto *nozzle_diameter = static_cast<const ConfigOptionFloats*>(printers.get_edited_preset().config.option("nozzle_diameter"));
size_t num_extruders = nozzle_diameter->values.size();
// Verify validity of the current filament presets.
for (size_t i = 0; i < std::min(this->filament_presets.size(), num_extruders); ++ i)
this->filament_presets[i] = this->filaments.find_preset(this->filament_presets[i], true)->name;
// Append the rest of filament presets.
this->filament_presets.resize(num_extruders, this->filament_presets.empty() ? this->filaments.first_visible().name : this->filament_presets.back());
// Now verify if wiping_volumes_matrix has proper size (it is used to deduce number of extruders in wipe tower generator):
std::vector<double> old_matrix = this->project_config.option<ConfigOptionFloats>("wiping_volumes_matrix")->values;
size_t old_number_of_extruders = size_t(sqrt(old_matrix.size())+EPSILON);
if (num_extruders != old_number_of_extruders) {
// First verify if purging volumes presets for each extruder matches number of extruders
std::vector<double>& extruders = this->project_config.option<ConfigOptionFloats>("wiping_volumes_extruders")->values;
while (extruders.size() < 2*num_extruders) {
extruders.push_back(extruders.size()>1 ? extruders[0] : 50.); // copy the values from the first extruder
extruders.push_back(extruders.size()>1 ? extruders[1] : 50.);
}
while (extruders.size() > 2*num_extruders) {
extruders.pop_back();
extruders.pop_back();
}
std::vector<double> new_matrix;
for (unsigned int i=0;i<num_extruders;++i)
for (unsigned int j=0;j<num_extruders;++j) {
// append the value for this pair from the old matrix (if it's there):
if (i<old_number_of_extruders && j<old_number_of_extruders)
new_matrix.push_back(old_matrix[i*old_number_of_extruders + j]);
else
new_matrix.push_back( i==j ? 0. : extruders[2*i]+extruders[2*j+1]); // so it matches new extruder volumes
}
this->project_config.option<ConfigOptionFloats>("wiping_volumes_matrix")->values = new_matrix;
}
}
void PresetBundle::update_compatible(PresetSelectCompatibleType select_other_print_if_incompatible, PresetSelectCompatibleType select_other_filament_if_incompatible)
{
const Preset &printer_preset = this->printers.get_edited_preset();
const PresetWithVendorProfile printer_preset_with_vendor_profile = this->printers.get_preset_with_vendor_profile(printer_preset);
class PreferedProfileMatch
{
public:
PreferedProfileMatch(const std::string &prefered_alias, const std::string &prefered_name) :
m_prefered_alias(prefered_alias), m_prefered_name(prefered_name) {}
int operator()(const Preset &preset) const
{
return
preset.is_default || preset.is_external ?
// Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
0 :
! m_prefered_alias.empty() && m_prefered_alias == preset.alias ?
// Matching an alias, always take this preset with priority.
std::numeric_limits<int>::max() :
// Otherwise take the prefered profile, or the first compatible.
preset.name == m_prefered_name;
}
private:
const std::string m_prefered_alias;
const std::string &m_prefered_name;
};
// Matching by the layer height in addition.
class PreferedPrintProfileMatch : public PreferedProfileMatch
{
public:
PreferedPrintProfileMatch(const Preset *preset, const std::string &prefered_name) :
PreferedProfileMatch(preset ? preset->alias : std::string(), prefered_name), m_prefered_layer_height(preset ? preset->config.opt_float("layer_height") : 0) {}
int operator()(const Preset &preset) const
{
// Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
if (preset.is_default || preset.is_external)
return 0;
int match_quality = PreferedProfileMatch::operator()(preset);
if (match_quality < std::numeric_limits<int>::max()) {
match_quality += 1;
if (m_prefered_layer_height > 0. && std::abs(preset.config.opt_float("layer_height") - m_prefered_layer_height) < 0.0005)
match_quality *= 10;
}
return match_quality;
}
private:
const double m_prefered_layer_height;
};
// Matching by the layer height in addition.
class PreferedFilamentProfileMatch : public PreferedProfileMatch
{
public:
PreferedFilamentProfileMatch(const Preset *preset, const std::string &prefered_name) :
PreferedProfileMatch(preset ? preset->alias : std::string(), prefered_name),
m_prefered_filament_type(preset ? preset->config.opt_string("filament_type", 0) : std::string()) {}
int operator()(const Preset &preset) const
{
// Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
if (preset.is_default || preset.is_external)
return 0;
int match_quality = PreferedProfileMatch::operator()(preset);
if (match_quality < std::numeric_limits<int>::max()) {
match_quality += 1;
if (! m_prefered_filament_type.empty() && m_prefered_filament_type == preset.config.opt_string("filament_type", 0))
match_quality *= 10;
}
return match_quality;
}
private:
const std::string m_prefered_filament_type;
};
// Matching by the layer height in addition.
class PreferedFilamentsProfileMatch
{
public:
PreferedFilamentsProfileMatch(const Preset *preset, const std::vector<std::string> &prefered_names) :
m_prefered_alias(preset ? preset->alias : std::string()),
m_prefered_filament_type(preset ? preset->config.opt_string("filament_type", 0) : std::string()),
m_prefered_names(prefered_names)
{}
int operator()(const Preset &preset) const
{
// Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
if (preset.is_default || preset.is_external)
return 0;
if (! m_prefered_alias.empty() && m_prefered_alias == preset.alias)
// Matching an alias, always take this preset with priority.
return std::numeric_limits<int>::max();
int match_quality = (std::find(m_prefered_names.begin(), m_prefered_names.end(), preset.name) != m_prefered_names.end()) + 1;
if (! m_prefered_filament_type.empty() && m_prefered_filament_type == preset.config.opt_string("filament_type", 0))
match_quality *= 10;
return match_quality;
}
private:
const std::string m_prefered_alias;
const std::string m_prefered_filament_type;
const std::vector<std::string> &m_prefered_names;
};
switch (printer_preset.printer_technology()) {
case ptFFF:
{
assert(printer_preset.config.has("default_print_profile"));
assert(printer_preset.config.has("default_filament_profile"));
const std::vector<std::string> &prefered_filament_profiles = printer_preset.config.option<ConfigOptionStrings>("default_filament_profile")->values;
this->prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible,
PreferedPrintProfileMatch(this->prints.get_selected_idx() == size_t(-1) ? nullptr : &this->prints.get_edited_preset(), printer_preset.config.opt_string("default_print_profile")));
const PresetWithVendorProfile print_preset_with_vendor_profile = this->prints.get_edited_preset_with_vendor_profile();
// Remember whether the filament profiles were compatible before updating the filament compatibility.
std::vector<char> filament_preset_was_compatible(this->filament_presets.size(), false);
for (size_t idx = 0; idx < this->filament_presets.size(); ++ idx) {
Preset *preset = this->filaments.find_preset(this->filament_presets[idx], false);
filament_preset_was_compatible[idx] = preset != nullptr && preset->is_compatible;
}
// First select a first compatible profile for the preset editor.
this->filaments.update_compatible(printer_preset_with_vendor_profile, &print_preset_with_vendor_profile, select_other_filament_if_incompatible,
PreferedFilamentsProfileMatch(this->filaments.get_selected_idx() == size_t(-1) ? nullptr : &this->filaments.get_edited_preset(), prefered_filament_profiles));
if (select_other_filament_if_incompatible != PresetSelectCompatibleType::Never) {
// Verify validity of the current filament presets.
const std::string prefered_filament_profile = prefered_filament_profiles.empty() ? std::string() : prefered_filament_profiles.front();
if (this->filament_presets.size() == 1) {
// The compatible profile should have been already selected for the preset editor. Just use it.
if (select_other_filament_if_incompatible == PresetSelectCompatibleType::Always || filament_preset_was_compatible.front())
this->filament_presets.front() = this->filaments.get_edited_preset().name;
} else {
for (size_t idx = 0; idx < this->filament_presets.size(); ++ idx) {
std::string &filament_name = this->filament_presets[idx];
Preset *preset = this->filaments.find_preset(filament_name, false);
if (preset == nullptr || (! preset->is_compatible && (select_other_filament_if_incompatible == PresetSelectCompatibleType::Always || filament_preset_was_compatible[idx])))
// Pick a compatible profile. If there are prefered_filament_profiles, use them.
filament_name = this->filaments.first_compatible(
PreferedFilamentProfileMatch(preset,
(idx < prefered_filament_profiles.size()) ? prefered_filament_profiles[idx] : prefered_filament_profile)).name;
}
}
}
break;
}
case ptSLA:
{
assert(printer_preset.config.has("default_sla_print_profile"));
assert(printer_preset.config.has("default_sla_material_profile"));
this->sla_prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible,
PreferedPrintProfileMatch(this->sla_prints.get_selected_idx() == size_t(-1) ? nullptr : &this->sla_prints.get_edited_preset(), printer_preset.config.opt_string("default_sla_print_profile")));
const PresetWithVendorProfile sla_print_preset_with_vendor_profile = this->sla_prints.get_edited_preset_with_vendor_profile();
this->sla_materials.update_compatible(printer_preset_with_vendor_profile, &sla_print_preset_with_vendor_profile, select_other_filament_if_incompatible,
PreferedProfileMatch(this->sla_materials.get_selected_idx() == size_t(-1) ? std::string() : this->sla_materials.get_edited_preset().alias, printer_preset.config.opt_string("default_sla_material_profile")));
break;
}
default: break;
}
}
void PresetBundle::export_configbundle(const std::string &path, bool export_system_settings, bool export_physical_printers/* = false*/)
{
boost::nowide::ofstream c;
c.open(path, std::ios::out | std::ios::trunc);
// Put a comment at the first line including the time stamp and Slic3r version.
c << "# " << Slic3r::header_slic3r_generated() << std::endl;
// Export the print, filament and printer profiles.
for (const PresetCollection *presets : {
(const PresetCollection*)&this->prints, (const PresetCollection*)&this->filaments,
(const PresetCollection*)&this->sla_prints, (const PresetCollection*)&this->sla_materials,
(const PresetCollection*)&this->printers }) {
for (const Preset &preset : (*presets)()) {
if (preset.is_default || preset.is_external || (preset.is_system && ! export_system_settings))
// Only export the common presets, not external files or the default preset.
continue;
c << std::endl << "[" << presets->section_name() << ":" << preset.name << "]" << std::endl;
for (const std::string &opt_key : preset.config.keys())
c << opt_key << " = " << preset.config.opt_serialize(opt_key) << std::endl;
}
}
if (export_physical_printers) {
for (const PhysicalPrinter& ph_printer : this->physical_printers) {
c << std::endl << "[physical_printer:" << ph_printer.name << "]" << std::endl;
for (const std::string& opt_key : ph_printer.config.keys())
c << opt_key << " = " << ph_printer.config.opt_serialize(opt_key) << std::endl;
}
}
// Export the names of the active presets.
c << std::endl << "[presets]" << std::endl;
c << "print = " << this->prints.get_selected_preset_name() << std::endl;
c << "sla_print = " << this->sla_prints.get_selected_preset_name() << std::endl;
c << "sla_material = " << this->sla_materials.get_selected_preset_name() << std::endl;
c << "printer = " << this->printers.get_selected_preset_name() << std::endl;
for (size_t i = 0; i < this->filament_presets.size(); ++ i) {
char suffix[64];
if (i > 0)
sprintf(suffix, "_%d", (int)i);
else
suffix[0] = 0;
c << "filament" << suffix << " = " << this->filament_presets[i] << std::endl;
}
if (export_physical_printers && this->physical_printers.get_selected_idx() >= 0)
c << "physical_printer = " << this->physical_printers.get_selected_printer_name() << std::endl;
#if 0
// Export the following setting values from the provided setting repository.
static const char *settings_keys[] = { "autocenter" };
c << "[settings]" << std::endl;
for (size_t i = 0; i < sizeof(settings_keys) / sizeof(settings_keys[0]); ++ i)
c << settings_keys[i] << " = " << settings.serialize(settings_keys[i]) << std::endl;
#endif
c.close();
}
// Set the filament preset name. As the name could come from the UI selection box,
// an optional "(modified)" suffix will be removed from the filament name.
void PresetBundle::set_filament_preset(size_t idx, const std::string &name)
{
if (idx >= filament_presets.size())
filament_presets.resize(idx + 1, filaments.default_preset().name);
filament_presets[idx] = Preset::remove_suffix_modified(name);
}
void PresetBundle::set_default_suppressed(bool default_suppressed)
{
prints.set_default_suppressed(default_suppressed);
filaments.set_default_suppressed(default_suppressed);
sla_prints.set_default_suppressed(default_suppressed);
sla_materials.set_default_suppressed(default_suppressed);
printers.set_default_suppressed(default_suppressed);
}
} // namespace Slic3r