# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-02-03 21:27+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:299
msgid "Portions copyright"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:135 src/slic3r/GUI/AboutDialog.cpp:263
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:137
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:206
#, possible-c-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:238 src/slic3r/GUI/AboutDialog.cpp:361
#: src/slic3r/GUI/GUI_App.cpp:243 src/slic3r/GUI/MainFrame.cpp:151
msgid "Version"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:265 src/slic3r/GUI/GUI_App.cpp:248
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:266 src/slic3r/GUI/GUI_App.cpp:248
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:267
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:268
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:304
msgid "Copy Version Info"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:78
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
msgid "Unknown error occured during exporting G-code."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:171
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:174
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:177
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:180
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:187
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:536
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:189
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:194
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:243
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:238
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:539
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:562
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:93
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:221 src/slic3r/GUI/Plater.cpp:162
#: src/slic3r/GUI/Tab.cpp:2550
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:94
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:796
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:110
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:121
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:242
#: src/slic3r/GUI/ConfigWizard.cpp:1366 src/slic3r/GUI/ConfigWizard.cpp:1380
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:88
#: src/slic3r/GUI/GCodeViewer.cpp:3647 src/slic3r/GUI/GCodeViewer.cpp:3653
#: src/slic3r/GUI/GCodeViewer.cpp:3661 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:322
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:467
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:468
#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:77
#: src/libslic3r/PrintConfig.cpp:84 src/libslic3r/PrintConfig.cpp:95
#: src/libslic3r/PrintConfig.cpp:135 src/libslic3r/PrintConfig.cpp:244
#: src/libslic3r/PrintConfig.cpp:303 src/libslic3r/PrintConfig.cpp:328
#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:410
#: src/libslic3r/PrintConfig.cpp:460 src/libslic3r/PrintConfig.cpp:590
#: src/libslic3r/PrintConfig.cpp:601 src/libslic3r/PrintConfig.cpp:619
#: src/libslic3r/PrintConfig.cpp:799 src/libslic3r/PrintConfig.cpp:1085
#: src/libslic3r/PrintConfig.cpp:1094 src/libslic3r/PrintConfig.cpp:1347
#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1589
#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1625
#: src/libslic3r/PrintConfig.cpp:1683 src/libslic3r/PrintConfig.cpp:1693
#: src/libslic3r/PrintConfig.cpp:1818 src/libslic3r/PrintConfig.cpp:1826
#: src/libslic3r/PrintConfig.cpp:1867 src/libslic3r/PrintConfig.cpp:1875
#: src/libslic3r/PrintConfig.cpp:1885 src/libslic3r/PrintConfig.cpp:1893
#: src/libslic3r/PrintConfig.cpp:1901 src/libslic3r/PrintConfig.cpp:1964
#: src/libslic3r/PrintConfig.cpp:2230 src/libslic3r/PrintConfig.cpp:2301
#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2464
#: src/libslic3r/PrintConfig.cpp:2543 src/libslic3r/PrintConfig.cpp:2550
#: src/libslic3r/PrintConfig.cpp:2557 src/libslic3r/PrintConfig.cpp:2587
#: src/libslic3r/PrintConfig.cpp:2597 src/libslic3r/PrintConfig.cpp:2607
#: src/libslic3r/PrintConfig.cpp:2767 src/libslic3r/PrintConfig.cpp:2801
#: src/libslic3r/PrintConfig.cpp:2940 src/libslic3r/PrintConfig.cpp:2949
#: src/libslic3r/PrintConfig.cpp:2958 src/libslic3r/PrintConfig.cpp:2968
#: src/libslic3r/PrintConfig.cpp:3033 src/libslic3r/PrintConfig.cpp:3043
#: src/libslic3r/PrintConfig.cpp:3055 src/libslic3r/PrintConfig.cpp:3075
#: src/libslic3r/PrintConfig.cpp:3085 src/libslic3r/PrintConfig.cpp:3095
#: src/libslic3r/PrintConfig.cpp:3113 src/libslic3r/PrintConfig.cpp:3128
#: src/libslic3r/PrintConfig.cpp:3142 src/libslic3r/PrintConfig.cpp:3153
#: src/libslic3r/PrintConfig.cpp:3166 src/libslic3r/PrintConfig.cpp:3211
#: src/libslic3r/PrintConfig.cpp:3221 src/libslic3r/PrintConfig.cpp:3230
#: src/libslic3r/PrintConfig.cpp:3240 src/libslic3r/PrintConfig.cpp:3256
#: src/libslic3r/PrintConfig.cpp:3280
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:131
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:141
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:142
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:240
#: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:358
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:145
msgid "Invalid"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222
#: src/slic3r/GUI/GUI_ObjectList.cpp:2306
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:243
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1826
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:315
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413
#: src/slic3r/GUI/Tab.cpp:3502
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446
msgid "Not found:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:395
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:563
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619
#: src/slic3r/GUI/BedShapeDialog.cpp:642
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:581
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:589
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:593
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:608
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:631
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1325
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:224
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:231
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:36 src/slic3r/GUI/Preferences.cpp:517
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:53 src/slic3r/GUI/Preferences.cpp:528
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:48
msgid ""
"Zero layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:49
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1387
#: src/libslic3r/PrintConfig.cpp:73
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:60
msgid ""
"Zero first layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:994
msgid "First layer height"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:81
#, possible-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:89
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:90
msgid "Spiral Vase"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:115
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:119
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:120
#: src/slic3r/GUI/ConfigManipulation.cpp:140
msgid "Wipe Tower"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:136
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:139
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:159
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:162
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:163
msgid "Support Generator"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:198
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:201
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:202
#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93
#: src/slic3r/GUI/GUI_ObjectList.cpp:682 src/slic3r/GUI/Plater.cpp:389
#: src/slic3r/GUI/Tab.cpp:1444 src/slic3r/GUI/Tab.cpp:1446
#: src/libslic3r/PrintConfig.cpp:259 src/libslic3r/PrintConfig.cpp:497
#: src/libslic3r/PrintConfig.cpp:521 src/libslic3r/PrintConfig.cpp:873
#: src/libslic3r/PrintConfig.cpp:887 src/libslic3r/PrintConfig.cpp:924
#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1175
#: src/libslic3r/PrintConfig.cpp:1242 src/libslic3r/PrintConfig.cpp:1261
#: src/libslic3r/PrintConfig.cpp:1280 src/libslic3r/PrintConfig.cpp:2017
#: src/libslic3r/PrintConfig.cpp:2034
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:322
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:324
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:335
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:337
msgid "Invalid pinhead diameter"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:143
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28
#: src/slic3r/GUI/GUI_Preview.cpp:226 src/libslic3r/ExtrusionEntity.cpp:309
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44
msgid "Active"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1303
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/libslic3r/Preset.cpp:1305
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 src/slic3r/GUI/Plater.cpp:693
#: src/libslic3r/Preset.cpp:1306
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:62 src/libslic3r/Preset.cpp:1307
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 src/slic3r/GUI/Tab.cpp:1304
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:84
#, possible-c-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:87
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:113
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:242
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:246
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:310
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:310
msgid "Standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:311 src/slic3r/GUI/ConfigWizard.cpp:605
#: src/slic3r/GUI/Tab.cpp:3583 src/slic3r/GUI/UnsavedChangesDialog.cpp:933
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:312 src/slic3r/GUI/ConfigWizard.cpp:606
#: src/slic3r/GUI/DoubleSlider.cpp:1879 src/slic3r/GUI/Plater.cpp:361
#: src/slic3r/GUI/Plater.cpp:504 src/libslic3r/PrintConfig.cpp:1045
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:452
#, possible-c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:454
#, possible-c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:456
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:458
#, possible-c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:463
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:506
#, possible-c-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:594
msgid "Printer:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:596
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:597
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:669 src/slic3r/GUI/ConfigWizard.cpp:819
#: src/slic3r/GUI/ConfigWizard.cpp:880 src/slic3r/GUI/ConfigWizard.cpp:1017
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:698
msgid ""
"Filaments marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:701
msgid "All installed printers are compatible with the selected filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:721
msgid ""
"Only the following installed printers are compatible with the selected "
"filament:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1105
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1105
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1107
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1109
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1134
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1134
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1142 src/slic3r/GUI/Preferences.cpp:94
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1146
#, possible-c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1152 src/slic3r/GUI/Preferences.cpp:129
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1156
#, possible-c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1159
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1164
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1171 src/slic3r/GUI/GUI_ObjectList.cpp:1843
#: src/slic3r/GUI/GUI_ObjectList.cpp:4601 src/slic3r/GUI/Plater.cpp:3130
#: src/slic3r/GUI/Plater.cpp:4022 src/slic3r/GUI/Plater.cpp:4053
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1174
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1178
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1188
msgid "Files association"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1190 src/slic3r/GUI/Preferences.cpp:112
msgid "Associate .3mf files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1191 src/slic3r/GUI/Preferences.cpp:119
msgid "Associate .stl files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1202
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1204
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1209
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1210
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1211
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1217
msgid "The size of the object can be specified in inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1218
msgid "Use inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1252
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1256
#, possible-c-format
msgid "Pick another vendor supported by %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1287
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1287 src/slic3r/GUI/Tab.cpp:2186
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1291
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1325
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1328
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1348
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1348
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1362
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1365
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1375
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1376
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1379
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1413
msgid "Nozzle and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1413
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1429
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1430
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1433
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1434 src/slic3r/GUI/ConfigWizard.cpp:1448
#: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:975
#: src/libslic3r/PrintConfig.cpp:1019 src/libslic3r/PrintConfig.cpp:2383
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1443
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1444
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1447
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1907 src/slic3r/GUI/ConfigWizard.cpp:2580
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1907 src/slic3r/GUI/ConfigWizard.cpp:2582
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1961
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1966
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2272 src/slic3r/GUI/DoubleSlider.cpp:2265
#: src/slic3r/GUI/DoubleSlider.cpp:2285 src/slic3r/GUI/GUI.cpp:250
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2293
msgid "The following FFF printer models have no filament selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2297
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2311
msgid "The following SLA printer models have no materials selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2315
msgid "Do you want to select default SLA materials for these printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2543
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2546
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2547
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2548
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2549 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:656
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2562
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2565
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2580
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2580 src/slic3r/GUI/ConfigWizard.cpp:2582
#: src/slic3r/GUI/GUI_ObjectList.cpp:4178
msgid "Type:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2582
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2699
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2700
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2702
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2703
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:97
msgid "Place bearings in slots and resume printing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1244
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1246
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1250 src/slic3r/GUI/DoubleSlider.cpp:2015
msgid "Jump to move"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1253
#, possible-c-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1256
#, possible-c-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1261
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1271
msgid "Print mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1285
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1287
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1289
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1290
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1292
msgid "Add another code - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1293
msgid "Add another code - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1299
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1308
msgid "Color change (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1309
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1311
msgid "Pause print (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1313
msgid "Custom template (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1315
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1322
msgid "Note"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1324
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1327
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1330
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1333
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1338
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1340
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1341
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1437 src/slic3r/GUI/DoubleSlider.cpp:1471
#: src/slic3r/GUI/GUI_ObjectList.cpp:1882
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1438 src/slic3r/GUI/GUI_ObjectList.cpp:1883
msgid "active"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1447
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1447 src/slic3r/GUI/GUI_ObjectList.cpp:1850
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1448
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1450
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1472
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1480
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1481
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1817
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1828
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1832
msgid "Add custom template"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1835
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1853
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1854
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1855
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1861
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1862
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1863
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1864
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1874 src/slic3r/GUI/DoubleSlider.cpp:2015
msgid "Jump to height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1879
msgid "Hide ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1883
msgid "Show object height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1883
msgid "Show object height on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1887
msgid "Show estimated print time"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1887
msgid "Show estimated print time on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1891
msgid "Ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1891
msgid "Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1896
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1982
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1983
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1998
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1999
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2014
msgid "Enter the move you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2014
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2259
msgid "The last color change data was saved for a single extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2260 src/slic3r/GUI/DoubleSlider.cpp:2275
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2262
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2263 src/slic3r/GUI/DoubleSlider.cpp:2283
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2276
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2279
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2281
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2282
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:296 src/slic3r/GUI/GUI_ObjectList.cpp:526
#: src/slic3r/GUI/GUI_ObjectList.cpp:538 src/slic3r/GUI/GUI_ObjectList.cpp:1047
#: src/slic3r/GUI/GUI_ObjectList.cpp:4616
#: src/slic3r/GUI/GUI_ObjectList.cpp:4626
#: src/slic3r/GUI/GUI_ObjectList.cpp:4661
#: src/slic3r/GUI/ObjectDataViewModel.cpp:209
#: src/slic3r/GUI/ObjectDataViewModel.cpp:266
#: src/slic3r/GUI/ObjectDataViewModel.cpp:291
#: src/slic3r/GUI/ObjectDataViewModel.cpp:499 src/libslic3r/PrintConfig.cpp:577
msgid "default"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:24
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:40
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:53
#: src/libslic3r/PrintConfig.cpp:443 src/libslic3r/PrintConfig.cpp:1178
#: src/libslic3r/PrintConfig.cpp:1807 src/libslic3r/PrintConfig.cpp:1972
#: src/libslic3r/PrintConfig.cpp:2039 src/libslic3r/PrintConfig.cpp:2246
#: src/libslic3r/PrintConfig.cpp:2292
msgid "layers"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:137
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:183
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:193
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:197
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:200
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:211 src/slic3r/GUI/OptionsGroup.cpp:780
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:886
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:233
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:253 src/slic3r/GUI/Field.cpp:307
#: src/slic3r/GUI/Field.cpp:1507 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/Field.cpp:264
#, possible-c-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""

#: src/slic3r/GUI/Field.cpp:266 src/slic3r/GUI/Field.cpp:326
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/Field.cpp:279 src/slic3r/GUI/Field.cpp:373
#: src/slic3r/GUI/Field.cpp:1519
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:323
#, possible-c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:381
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, possible-c-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, possible-c-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:805
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:289
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:852
#: src/slic3r/GUI/Mouse3DController.cpp:551
#: src/slic3r/GUI/PrintHostDialogs.cpp:200
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:902
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:906
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:289
msgid "Tool position"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1418 src/slic3r/GUI/GCodeViewer.cpp:1918
msgid "Generating toolpaths"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1456 src/slic3r/GUI/GCodeViewer.cpp:2302
msgid "Generating vertex buffer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1719 src/slic3r/GUI/GCodeViewer.cpp:2390
msgid "Generating index buffers"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3535
msgid "Click to hide"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3535
msgid "Click to show"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3647
msgid "up to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3653
msgid "above"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3661
msgid "from"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3661
msgid "to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3689 src/slic3r/GUI/GCodeViewer.cpp:3697
#: src/slic3r/GUI/GUI_Preview.cpp:211 src/slic3r/GUI/GUI_Preview.cpp:536
#: src/slic3r/GUI/GUI_Preview.cpp:945
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3689 src/slic3r/GUI/GCodeViewer.cpp:3697
#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3697
msgid "Percentage"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3700
msgid "Height (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3701
msgid "Width (mm)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3702
msgid "Speed (mm/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3703
msgid "Fan Speed (%)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3704
msgid "Volumetric flow rate (mm³/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3705 src/slic3r/GUI/GUI_Preview.cpp:217
#: src/slic3r/GUI/GUI_Preview.cpp:323 src/slic3r/GUI/GUI_Preview.cpp:474
#: src/slic3r/GUI/GUI_Preview.cpp:535 src/slic3r/GUI/GUI_Preview.cpp:881
#: src/slic3r/GUI/GUI_Preview.cpp:945
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3706 src/slic3r/GUI/GUI_Preview.cpp:218
#: src/slic3r/GUI/GUI_Preview.cpp:533 src/slic3r/GUI/GUI_Preview.cpp:944
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3742 src/slic3r/GUI/GCodeViewer.cpp:3777
#: src/slic3r/GUI/GCodeViewer.cpp:3782 src/slic3r/GUI/GUI_ObjectList.cpp:326
#: src/slic3r/GUI/wxExtensions.cpp:519 src/libslic3r/PrintConfig.cpp:572
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3753
msgid "Default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3777
msgid "default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3872 src/slic3r/GUI/GCodeViewer.cpp:3918
msgid "Color change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3891 src/slic3r/GUI/GCodeViewer.cpp:3916
msgid "Print"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3917 src/slic3r/GUI/GCodeViewer.cpp:3934
msgid "Pause"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3922 src/slic3r/GUI/GCodeViewer.cpp:3925
msgid "Event"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3922 src/slic3r/GUI/GCodeViewer.cpp:3925
msgid "Remaining time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3925
msgid "Duration"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3960 src/slic3r/GUI/GUI_Preview.cpp:1026
#: src/libslic3r/PrintConfig.cpp:2469
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3963
msgid "Movement"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3964
msgid "Extrusion"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3965 src/slic3r/GUI/Tab.cpp:1708
#: src/slic3r/GUI/Tab.cpp:2596
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3982 src/slic3r/GUI/GCodeViewer.cpp:3985
#: src/slic3r/GUI/GUI_Preview.cpp:1027
msgid "Wipe"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4016 src/slic3r/GUI/GUI_Preview.cpp:245
#: src/slic3r/GUI/GUI_Preview.cpp:259
msgid "Options"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4019 src/slic3r/GUI/GUI_Preview.cpp:1028
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4020 src/slic3r/GUI/GUI_Preview.cpp:1029
msgid "Deretractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4021 src/slic3r/GUI/GUI_Preview.cpp:1030
msgid "Tool changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4022 src/slic3r/GUI/GUI_Preview.cpp:1031
msgid "Color changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4023 src/slic3r/GUI/GUI_Preview.cpp:1032
msgid "Print pauses"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4024 src/slic3r/GUI/GUI_Preview.cpp:1033
msgid "Custom G-codes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4035 src/slic3r/GUI/GCodeViewer.cpp:4059
#: src/slic3r/GUI/Plater.cpp:694 src/libslic3r/PrintConfig.cpp:117
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4037 src/slic3r/GUI/GCodeViewer.cpp:4064
#: src/slic3r/GUI/Plater.cpp:690
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4040 src/slic3r/GUI/GCodeViewer.cpp:4070
#: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Tab.cpp:1808
#: src/slic3r/GUI/Tab.cpp:1809
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4095 src/slic3r/GUI/GCodeViewer.cpp:4100
#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1143
#: src/slic3r/GUI/Plater.cpp:1228
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4095
msgid "Normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4100
msgid "Stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4128
msgid "Show stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:4132
msgid "Show normal mode"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:236 src/slic3r/GUI/GLCanvas3D.cpp:4619
msgid "Variable layer height"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:238
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:240
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:242
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:244
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:246
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:248
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:250
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:252
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:254
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:256
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:259
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:265
msgid "Quality / Speed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:268
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:279
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:285 src/libslic3r/PrintConfig.cpp:596
msgid "Radius"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:295
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:304 src/slic3r/GUI/GLCanvas3D.cpp:4055
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:566
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:634
msgid "An object outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:635
msgid "A toolpath outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:636
msgid "SLA supports outside the print area were detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:637
msgid "Some objects are not visible."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:639
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:949
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1455
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1463
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1471
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1876
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2746
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2832
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3389
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3859 src/slic3r/GUI/GLCanvas3D.cpp:4580
msgid "Switch to Settings"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3860 src/slic3r/GUI/GLCanvas3D.cpp:4580
msgid "Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3861 src/slic3r/GUI/GLCanvas3D.cpp:4581
msgid "Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3861 src/slic3r/GUI/GLCanvas3D.cpp:4581
msgid "Material Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3862 src/slic3r/GUI/GLCanvas3D.cpp:4582
msgid "Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3914
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3914
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3935
#, possible-c-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3935
#, possible-c-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3955 src/slic3r/GUI/GLCanvas3D.cpp:4598
#: src/slic3r/GUI/KBShortcutsDialog.cpp:98 src/slic3r/GUI/Search.cpp:348
msgid "Search"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3969 src/slic3r/GUI/GLCanvas3D.cpp:3977
#: src/slic3r/GUI/Search.cpp:355
msgid "Enter a search term"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4008
msgid "Arrange options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4038
msgid "Press %1%left mouse button to enter the exact value"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4040
msgid "Spacing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4047
msgid "Enable rotations (slow)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4065 src/slic3r/GUI/GLCanvas3D.cpp:4490
#: src/slic3r/GUI/KBShortcutsDialog.cpp:120 src/slic3r/GUI/Plater.cpp:1656
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4464
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4472 src/slic3r/GUI/GUI_ObjectList.cpp:1896
#: src/slic3r/GUI/Plater.cpp:4019 src/slic3r/GUI/Plater.cpp:4043
#: src/slic3r/GUI/Tab.cpp:3502
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4481 src/slic3r/GUI/KBShortcutsDialog.cpp:88
#: src/slic3r/GUI/Plater.cpp:5130
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4490 src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4490
msgid "Click right mouse button to show arrangement options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4512
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4521
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4533 src/slic3r/GUI/Plater.cpp:3878
#: src/slic3r/GUI/Plater.cpp:3890 src/slic3r/GUI/Plater.cpp:4028
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4544 src/slic3r/GUI/Plater.cpp:4030
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4557
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4567 src/slic3r/GUI/GUI_ObjectList.cpp:1668
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4669 src/slic3r/GUI/KBShortcutsDialog.cpp:89
#: src/slic3r/GUI/MainFrame.cpp:1125
msgid "Undo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4669 src/slic3r/GUI/GLCanvas3D.cpp:4708
msgid "Click right mouse button to open/close History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4692
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4708 src/slic3r/GUI/KBShortcutsDialog.cpp:90
#: src/slic3r/GUI/MainFrame.cpp:1128
msgid "Redo"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4730
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6354
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6373
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151 src/libslic3r/PrintConfig.cpp:3771
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:322
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:467
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:468
msgid "in"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:185
msgid "Keep upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:186
msgid "Keep lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:187
msgid "Rotate lower part upwards"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
msgid "Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
msgid "Clipping of view"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27
msgid "Brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28
msgid "Brush shape"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29
msgid "Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "Enforce supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
msgid "Right mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:373
msgid "Block supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Shift + Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:368
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:378
msgid "Remove selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Remove all selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
msgid "Circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
#: src/slic3r/GUI/GUI_ObjectList.cpp:1613
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:129
msgid "Autoset by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:118
msgid "Reset selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
msgid "Alt + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:159
msgid "Paints all facets inside, regardless of their orientation."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:173
msgid "Ignores facets facing away from the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:203
msgid "Ctrl + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233
msgid "Autoset custom supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235
msgid "Threshold:"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242
msgid "Enforce"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245
msgid "Block"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295
msgid "Block supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296
msgid "Add supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
#: src/libslic3r/PrintConfig.cpp:3272
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785
msgid "Hollow and drill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:508
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:543
#: src/libslic3r/PrintConfig.cpp:3820
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:528
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:544
#: src/libslic3r/PrintConfig.cpp:3835
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:381
msgid "Enforce seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:383
msgid "Block seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46
msgid "Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
msgid "Head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
msgid "Minimal points distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
#: src/libslic3r/PrintConfig.cpp:3102
msgid "Support points density"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
msgid "SLA gizmo turned on"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912
msgid "Save changes?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924
msgid "SLA gizmo turned off"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 src/slic3r/GUI/GUI.cpp:262
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:557
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:586
#: src/slic3r/GUI/WipeTowerDialog.cpp:45 src/slic3r/GUI/WipeTowerDialog.cpp:366
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:39
msgid "Entering Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40
msgid "Entering Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:47
msgid "Leaving Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48
msgid "Leaving Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:371
msgid "Add supports"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:247
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:249
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:250
msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:391
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:399
#, possible-c-format
msgid "%s - BREAKING CHANGE"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:401
msgid "Quit, I will move my data now"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:401
msgid "Start the application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:589
#, possible-c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:592
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:596
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:599
msgid "Critical error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:726
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:732
msgid ""
"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:787
#, possible-c-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:789 src/slic3r/GUI/UnsavedChangesDialog.cpp:665
msgid "Remember my choice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:827
msgid "Loading configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:892
msgid "Preparing settings tabs"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1149
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1153
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1155
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1158 src/slic3r/GUI/PhysicalPrinterDialog.cpp:631
msgid "Information"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1171 src/slic3r/GUI/GUI_App.cpp:1182
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1187
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1192
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1269
msgid "Choose one file (3MF/AMF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1281
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1293
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1304
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1427
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1427
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1576
msgid "modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1625
#, possible-c-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1629
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1629
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1630
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1630
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1631
msgid "Check for updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1631
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1634
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1640
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1645 src/slic3r/GUI/wxExtensions.cpp:685
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1645
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1647 src/slic3r/GUI/wxExtensions.cpp:687
msgctxt "Mode"
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1647
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1648 src/slic3r/GUI/wxExtensions.cpp:688
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1648
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1653
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1653
#, possible-c-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1656
msgid "&Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1659
msgid "Flash printer &firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1659
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1675
msgid "Taking configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1675
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1704
msgid "Failed to activate configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1754
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1756
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1758
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1785
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1816
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_App.cpp:1838
msgid "The uploads are still ongoing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1838
msgid "Stop them and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1841
msgid "Ongoing uploads"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2052 src/slic3r/GUI/Tab.cpp:3256
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2053
msgid "Please check and fix your object list."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2054 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
#: src/slic3r/GUI/Plater.cpp:2367 src/slic3r/GUI/Tab.cpp:3258
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2071
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:88 src/slic3r/GUI/GUI_Init.cpp:91
msgid "PrusaSlicer GUI initialization failed"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:91
msgid "Fatal error, exception catched: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:161
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:165
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92
#: src/slic3r/GUI/GUI_ObjectList.cpp:681 src/libslic3r/PrintConfig.cpp:74
#: src/libslic3r/PrintConfig.cpp:189 src/libslic3r/PrintConfig.cpp:231
#: src/libslic3r/PrintConfig.cpp:240 src/libslic3r/PrintConfig.cpp:489
#: src/libslic3r/PrintConfig.cpp:555 src/libslic3r/PrintConfig.cpp:563
#: src/libslic3r/PrintConfig.cpp:995 src/libslic3r/PrintConfig.cpp:1308
#: src/libslic3r/PrintConfig.cpp:1673 src/libslic3r/PrintConfig.cpp:1739
#: src/libslic3r/PrintConfig.cpp:1924 src/libslic3r/PrintConfig.cpp:2391
#: src/libslic3r/PrintConfig.cpp:2450 src/libslic3r/PrintConfig.cpp:2459
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95
#: src/slic3r/GUI/GUI_ObjectList.cpp:684 src/slic3r/GUI/GUI_Preview.cpp:237
#: src/slic3r/GUI/Tab.cpp:1486 src/slic3r/GUI/Tab.cpp:1488
#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:352
#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:1804
#: src/libslic3r/PrintConfig.cpp:2182 src/libslic3r/PrintConfig.cpp:2188
#: src/libslic3r/PrintConfig.cpp:2196 src/libslic3r/PrintConfig.cpp:2208
#: src/libslic3r/PrintConfig.cpp:2218 src/libslic3r/PrintConfig.cpp:2226
#: src/libslic3r/PrintConfig.cpp:2241 src/libslic3r/PrintConfig.cpp:2262
#: src/libslic3r/PrintConfig.cpp:2274 src/libslic3r/PrintConfig.cpp:2290
#: src/libslic3r/PrintConfig.cpp:2299 src/libslic3r/PrintConfig.cpp:2308
#: src/libslic3r/PrintConfig.cpp:2319 src/libslic3r/PrintConfig.cpp:2333
#: src/libslic3r/PrintConfig.cpp:2341 src/libslic3r/PrintConfig.cpp:2342
#: src/libslic3r/PrintConfig.cpp:2351 src/libslic3r/PrintConfig.cpp:2359
#: src/libslic3r/PrintConfig.cpp:2373
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99
#: src/slic3r/GUI/GUI_ObjectList.cpp:688 src/libslic3r/PrintConfig.cpp:2569
#: src/libslic3r/PrintConfig.cpp:2577
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:683
#: src/slic3r/GUI/GUI_Preview.cpp:233 src/slic3r/GUI/Tab.cpp:1454
#: src/libslic3r/ExtrusionEntity.cpp:316 src/libslic3r/ExtrusionEntity.cpp:344
#: src/libslic3r/PrintConfig.cpp:1315 src/libslic3r/PrintConfig.cpp:1321
#: src/libslic3r/PrintConfig.cpp:1335 src/libslic3r/PrintConfig.cpp:1345
#: src/libslic3r/PrintConfig.cpp:1353 src/libslic3r/PrintConfig.cpp:1355
msgid "Ironing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:685
#: src/slic3r/GUI/GUI_Preview.cpp:214 src/slic3r/GUI/Tab.cpp:1512
#: src/libslic3r/PrintConfig.cpp:291 src/libslic3r/PrintConfig.cpp:543
#: src/libslic3r/PrintConfig.cpp:1101 src/libslic3r/PrintConfig.cpp:1281
#: src/libslic3r/PrintConfig.cpp:1354 src/libslic3r/PrintConfig.cpp:1729
#: src/libslic3r/PrintConfig.cpp:2005 src/libslic3r/PrintConfig.cpp:2057
#: src/libslic3r/PrintConfig.cpp:2435
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:686
#: src/slic3r/GUI/Tab.cpp:1548 src/slic3r/GUI/Tab.cpp:2126
#: src/libslic3r/PrintConfig.cpp:573 src/libslic3r/PrintConfig.cpp:1235
#: src/libslic3r/PrintConfig.cpp:1707 src/libslic3r/PrintConfig.cpp:2026
#: src/libslic3r/PrintConfig.cpp:2254 src/libslic3r/PrintConfig.cpp:2281
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:687
#: src/libslic3r/PrintConfig.cpp:532 src/libslic3r/PrintConfig.cpp:641
#: src/libslic3r/PrintConfig.cpp:982 src/libslic3r/PrintConfig.cpp:1243
#: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:2046
#: src/libslic3r/PrintConfig.cpp:2263 src/libslic3r/PrintConfig.cpp:2423
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:100 src/slic3r/GUI/GUI_ObjectList.cpp:689
#: src/slic3r/GUI/Tab.cpp:1472 src/libslic3r/PrintConfig.cpp:301
#: src/libslic3r/PrintConfig.cpp:310 src/libslic3r/PrintConfig.cpp:326
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:691
#: src/slic3r/GUI/Tab.cpp:1428 src/slic3r/GUI/Tab.cpp:1464
#: src/slic3r/GUI/Tab.cpp:1569 src/slic3r/GUI/Tab.cpp:1572
#: src/slic3r/GUI/Tab.cpp:1869 src/slic3r/GUI/Tab.cpp:2211
#: src/slic3r/GUI/Tab.cpp:4132 src/libslic3r/PrintConfig.cpp:92
#: src/libslic3r/PrintConfig.cpp:132 src/libslic3r/PrintConfig.cpp:279
#: src/libslic3r/PrintConfig.cpp:1186 src/libslic3r/PrintConfig.cpp:1270
#: src/libslic3r/PrintConfig.cpp:2593 src/libslic3r/PrintConfig.cpp:2765
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:693
#: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4066
#: src/slic3r/GUI/Tab.cpp:4067 src/libslic3r/PrintConfig.cpp:2931
#: src/libslic3r/PrintConfig.cpp:2938 src/libslic3r/PrintConfig.cpp:2947
#: src/libslic3r/PrintConfig.cpp:2956 src/libslic3r/PrintConfig.cpp:2966
#: src/libslic3r/PrintConfig.cpp:2976 src/libslic3r/PrintConfig.cpp:3013
#: src/libslic3r/PrintConfig.cpp:3020 src/libslic3r/PrintConfig.cpp:3031
#: src/libslic3r/PrintConfig.cpp:3041 src/libslic3r/PrintConfig.cpp:3050
#: src/libslic3r/PrintConfig.cpp:3063 src/libslic3r/PrintConfig.cpp:3073
#: src/libslic3r/PrintConfig.cpp:3082 src/libslic3r/PrintConfig.cpp:3092
#: src/libslic3r/PrintConfig.cpp:3103 src/libslic3r/PrintConfig.cpp:3111
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:694
#: src/slic3r/GUI/Plater.cpp:500 src/slic3r/GUI/Tab.cpp:4107
#: src/slic3r/GUI/Tab.cpp:4108 src/slic3r/GUI/Tab.cpp:4179
#: src/libslic3r/PrintConfig.cpp:3119 src/libslic3r/PrintConfig.cpp:3126
#: src/libslic3r/PrintConfig.cpp:3140 src/libslic3r/PrintConfig.cpp:3151
#: src/libslic3r/PrintConfig.cpp:3161 src/libslic3r/PrintConfig.cpp:3183
#: src/libslic3r/PrintConfig.cpp:3194 src/libslic3r/PrintConfig.cpp:3201
#: src/libslic3r/PrintConfig.cpp:3208 src/libslic3r/PrintConfig.cpp:3219
#: src/libslic3r/PrintConfig.cpp:3228 src/libslic3r/PrintConfig.cpp:3237
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4125
#: src/slic3r/GUI/Tab.cpp:4126 src/libslic3r/SLA/Hollowing.cpp:45
#: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66
#: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3247
#: src/libslic3r/PrintConfig.cpp:3254 src/libslic3r/PrintConfig.cpp:3264
#: src/libslic3r/PrintConfig.cpp:3273
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:314
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:142
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:330 src/slic3r/GUI/GUI_ObjectList.cpp:471
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:416 src/slic3r/GUI/Plater.cpp:1074
#, possible-c-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:423 src/slic3r/GUI/Plater.cpp:1079
#, possible-c-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:425 src/slic3r/GUI/Plater.cpp:1081
#, possible-c-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:427 src/slic3r/GUI/Plater.cpp:1083
#, possible-c-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:429 src/slic3r/GUI/Plater.cpp:1085
#, possible-c-format
msgid "%1$d facet added"
msgid_plural "%1$d facets added"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:431 src/slic3r/GUI/Plater.cpp:1087
#, possible-c-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:433 src/slic3r/GUI/Plater.cpp:1089
#, possible-c-format
msgid "%1$d backwards edge"
msgid_plural "%1$d backwards edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:436
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:473
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:475
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:479
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:481
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:604
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:619
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:619
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1265
#: src/slic3r/GUI/GUI_ObjectList.cpp:4406
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1280
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1280
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1356
#: src/slic3r/GUI/GUI_ObjectList.cpp:1711
#: src/slic3r/GUI/GUI_ObjectList.cpp:1717
#: src/slic3r/GUI/GUI_ObjectList.cpp:2099
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1495
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1496
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1497
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1567
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1568
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1569
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1608
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1613
#: src/slic3r/GUI/GUI_ObjectList.cpp:1645
#: src/slic3r/GUI/GUI_ObjectList.cpp:1649
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1613
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1613
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1681
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1690
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1768
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1778
#: src/slic3r/GUI/GUI_ObjectList.cpp:1790
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1790
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1800
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1815
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1826
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1836 src/slic3r/GUI/Plater.cpp:4056
msgid "Export as STL"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1843
#: src/slic3r/GUI/GUI_ObjectList.cpp:4601 src/slic3r/GUI/Plater.cpp:4022
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1850
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1882 src/libslic3r/PrintConfig.cpp:416
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1902
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1902
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1931 src/slic3r/GUI/Plater.cpp:5247
msgid "Convert from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1933 src/slic3r/GUI/Plater.cpp:5247
msgid "Revert conversion from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1962
#: src/slic3r/GUI/GUI_ObjectList.cpp:1970
#: src/slic3r/GUI/GUI_ObjectList.cpp:2650 src/libslic3r/PrintConfig.cpp:3811
msgid "Merge"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1962
msgid "Merge objects to the one multipart object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1970
msgid "Merge objects to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2044
#: src/slic3r/GUI/GUI_ObjectList.cpp:2301
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2129
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2168
msgid "Error!"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2243
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2272
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2398
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2422
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2438
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2470
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2474
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2489
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2493
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2517 src/slic3r/GUI/Plater.cpp:2879
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2521
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2657
msgid "Merged"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2741
msgid "Merge all parts to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2773
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2927
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2939
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2952
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2956
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2961
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2967
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2973
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2980
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2980
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3166
msgid "Delete Selected Item"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3354
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3430
#: src/slic3r/GUI/GUI_ObjectList.cpp:3458
#: src/slic3r/GUI/GUI_ObjectList.cpp:3478
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3524
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3528
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3533
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3592
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3899
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3907
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4042
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4043
#: src/slic3r/GUI/GUI_ObjectList.cpp:4176
msgid "Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4043
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4045
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4046
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4047
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4050
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4055
#: src/slic3r/GUI/GUI_ObjectList.cpp:4130 src/slic3r/GUI/Plater.cpp:143
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4171
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4176
msgid "Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4176
msgid "Support Enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4176
msgid "Support Blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4178
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4183
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4428
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4428
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4444
#: src/slic3r/GUI/GUI_ObjectList.cpp:4571
#: src/slic3r/GUI/SavePresetDialog.cpp:101
#: src/slic3r/GUI/SavePresetDialog.cpp:109
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4445
#: src/slic3r/GUI/GUI_ObjectList.cpp:4572
#: src/slic3r/GUI/SavePresetDialog.cpp:102
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4620
msgid "Select extruder number:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4621
msgid "This extruder will be set for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4646
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4743 src/slic3r/GUI/Selection.cpp:1485
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4743 src/slic3r/GUI/Selection.cpp:1485
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:96
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:97
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:73
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:144 src/libslic3r/GCode.cpp:537
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:204
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:205
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
#: src/slic3r/GUI/Mouse3DController.cpp:486
#: src/slic3r/GUI/Mouse3DController.cpp:507
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:252
#, possible-c-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:286
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:326
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:338
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:353
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:375
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:388
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:390
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:404
msgid "Inches"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:542
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:606
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:778
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:809
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:874
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:906
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:909
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:62
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:98
msgid "Remove parameter"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:104
#, possible-c-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:157
#, possible-c-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:209
msgid "View"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:212 src/libslic3r/PrintConfig.cpp:585
msgid "Height"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:2555
msgid "Width"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1854
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:216
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:221
msgid "Show"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:242
msgid "Feature types"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/ExtrusionEntity.cpp:310
#: src/libslic3r/ExtrusionEntity.cpp:332
msgid "Perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/ExtrusionEntity.cpp:311
#: src/libslic3r/ExtrusionEntity.cpp:334
msgid "External perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/ExtrusionEntity.cpp:312
#: src/libslic3r/ExtrusionEntity.cpp:336
msgid "Overhang perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/ExtrusionEntity.cpp:313
#: src/libslic3r/ExtrusionEntity.cpp:338
msgid "Internal infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/ExtrusionEntity.cpp:314
#: src/libslic3r/ExtrusionEntity.cpp:340 src/libslic3r/PrintConfig.cpp:2045
#: src/libslic3r/PrintConfig.cpp:2056
msgid "Solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/ExtrusionEntity.cpp:315
#: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2422
#: src/libslic3r/PrintConfig.cpp:2434
msgid "Top solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/ExtrusionEntity.cpp:317
#: src/libslic3r/ExtrusionEntity.cpp:346
msgid "Bridge infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:235 src/libslic3r/ExtrusionEntity.cpp:318
#: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:1100
msgid "Gap fill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/Tab.cpp:1474
#: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/ExtrusionEntity.cpp:350
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:321
#: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:2307
msgid "Support material interface"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/slic3r/GUI/Tab.cpp:1559
#: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/ExtrusionEntity.cpp:356
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1034
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1035
msgid "Tool marker"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1036
msgid "Legend/Estimated printing time"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:804 src/slic3r/GUI/Search.cpp:386
msgid "Use for search"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:805 src/slic3r/GUI/Search.cpp:380
msgid "Category"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:382
msgid "Search in English"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:153
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:162
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:191
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:192
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Jobs/Job.cpp:89
msgid "ERROR: not enough resources to execute a new job."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35
msgid "Choose SLA archive:"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39
msgid "Import file"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46
msgid "Import model and profile"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
msgid "Import profile only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
msgid "Import model only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59
msgid "Accurate"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
msgid "Balanced"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
msgid "Quick"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
msgid "Importing SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159
msgid "Importing canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160
msgid "Importing done."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2365
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2366
#: src/slic3r/GUI/Tab.cpp:3257
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:17 src/slic3r/GUI/MainFrame.cpp:894
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:69
msgid "New project, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:70
msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:71
msgid "Save project (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:72
msgid "Save project as (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:73
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:75
msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:76
msgid "Import Config from ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:77
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:79 src/slic3r/GUI/Plater.cpp:767
#: src/slic3r/GUI/Plater.cpp:6081 src/libslic3r/PrintConfig.cpp:3716
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:80 src/slic3r/GUI/Plater.cpp:6082
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:81
msgid "Export config"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:82 src/slic3r/GUI/Plater.cpp:755
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:83
msgid "Eject SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:85
msgid "Select all objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
msgid "Deselect all"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:91
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
#: src/slic3r/GUI/KBShortcutsDialog.cpp:96
#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Reload plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
#: src/slic3r/GUI/PrintHostDialogs.cpp:176
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/MainFrame.cpp:65
#: src/slic3r/GUI/MainFrame.cpp:1191
msgid "Open new instance"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112 src/slic3r/GUI/Preferences.cpp:13
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
msgid "Commands"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
msgid "Press to activate selection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Press to activate deselection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Move selection 10 mm in positive Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
msgid "Move selection 10 mm in negative Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
msgid "Move selection 10 mm in negative X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
msgid "Move selection 10 mm in positive X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
msgid "Any arrow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
msgid "Movement step set to 1 mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
msgid "Movement in camera space"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Page Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Rotate selection 45 degrees CCW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Page Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Rotate selection 45 degrees CW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Gizmo SLA hollow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Unselect gizmo or clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Switch between Editor/Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Collapse/Expand the sidebar"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167 src/slic3r/GUI/MainFrame.cpp:331
#: src/slic3r/GUI/MainFrame.cpp:343
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Gizmo move: Press to snap by 1mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Gizmo scale: Press to snap by 5%"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
msgid "Gizmos"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:183 src/slic3r/GUI/MainFrame.cpp:1244
msgid "Open a G-code file"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185 src/slic3r/GUI/MainFrame.cpp:1142
#: src/slic3r/GUI/MainFrame.cpp:1146 src/slic3r/GUI/MainFrame.cpp:1249
#: src/slic3r/GUI/MainFrame.cpp:1253
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Vertical slider - Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Vertical slider - Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Horizontal slider - Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
msgid "Horizontal slider - Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
msgid "On/Off one layer mode of the vertical slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
msgid "Show/Hide Legend and Estimated printing time"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
msgid "Upper layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
msgid "Lower layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
msgid "Upper Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:210
msgid "Lower Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:211
msgid "Show/Hide Legend & Estimated printing time"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:215 src/slic3r/GUI/Plater.cpp:4221
#: src/slic3r/GUI/Tab.cpp:2616
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
msgid "Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
msgid "Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
msgid "Set upper thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
msgid "Set lower thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
msgid "Move current slider thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Move current slider thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
msgid "Set upper thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
msgid "Set lower thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid "Vertical Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
msgid "Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
msgid "Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Set left thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
msgid "Set right thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Move active slider thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Move active slider thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid "Horizontal Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:276
msgid "Keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:65 src/slic3r/GUI/MainFrame.cpp:79
#: src/slic3r/GUI/MainFrame.cpp:1191
msgid "Open a new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:68 src/slic3r/GUI/MainFrame.cpp:81
msgid "G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:68 src/slic3r/GUI/MainFrame.cpp:1091
msgid "Open G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:79 src/slic3r/GUI/MainFrame.cpp:1260
msgid "Open PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:81
msgid "Open new G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:153
msgid ""
"Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/"
"releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:510
msgid "based on Slic3r"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:866
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:866
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:868
msgid "Software &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:868
msgid "Open the software releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:874
#, possible-c-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:875
#, possible-c-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:881
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:881
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:883
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:883
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:885
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:885
#, possible-c-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:888 src/slic3r/GUI/MainFrame.cpp:891
#, possible-c-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:888 src/slic3r/GUI/MainFrame.cpp:891
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:894
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:908
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:908
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:912 src/libslic3r/PrintConfig.cpp:2449
#: src/libslic3r/PrintConfig.cpp:2458
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:912
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:915 src/libslic3r/PrintConfig.cpp:230
#: src/libslic3r/PrintConfig.cpp:239
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:915
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:917
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:917
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:919 src/libslic3r/PrintConfig.cpp:1934
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:919
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:921
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:921
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:923
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:923
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:936
msgid "&New Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:936
msgid "Start a new project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:939
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:939
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:944
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:953
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:953 src/slic3r/GUI/MainFrame.cpp:1343
#: src/slic3r/GUI/PrintHostDialogs.cpp:274
msgid "Error"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:978
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:978
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:984
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:984
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:992
msgid "Import STL/OBJ/AM&F/3MF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:992
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:996
msgid "Import STL (imperial units)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:996
msgid "Load an model saved with imperial units"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1000
msgid "Import SL1 archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1000
msgid "Load an SL1 archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1005
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1005
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1008
msgid "Import Config from &project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1008
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1012
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1012
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1015
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1018 src/slic3r/GUI/MainFrame.cpp:1305
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1018
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1022 src/slic3r/GUI/MainFrame.cpp:1306
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1022
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1026
msgid "Export G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1026
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1030
msgid "Export plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1030
msgid "Export current plate as STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1033
msgid "Export plate as STL &including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1033
msgid "Export current plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1036
msgid "Export plate as &AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1036
msgid "Export current plate as AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1040 src/slic3r/GUI/MainFrame.cpp:1257
msgid "Export &toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1040 src/slic3r/GUI/MainFrame.cpp:1257
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1044
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1044
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1047
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1047
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1050
msgid "Export Config Bundle With Physical Printers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1050
msgid "Export all presets including physical printers to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1053
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1055
msgid "Ejec&t SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1055
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1063
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1063
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1069
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1069
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1075
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1075
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1083
msgid "(Re)Slice No&w"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1083
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1087
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1087
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1091
msgid "&G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1094 src/slic3r/GUI/MainFrame.cpp:1264
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1094 src/slic3r/GUI/MainFrame.cpp:1264
#, possible-c-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1109
msgid "&Select all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1110
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1112
msgid "D&eselect all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1113
msgid "Deselects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1116
msgid "&Delete selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1117
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1119
msgid "Delete &all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1120
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1124
msgid "&Undo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1127
msgid "&Redo"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1132
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1133
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1135
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1136
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1141 src/slic3r/GUI/MainFrame.cpp:1145
#: src/slic3r/GUI/MainFrame.cpp:1248 src/slic3r/GUI/MainFrame.cpp:1252
msgid "Re&load from disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1151
msgid "Searc&h"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1152
msgid "Search in settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1160
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1160
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1168 src/slic3r/GUI/MainFrame.cpp:1308
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1168
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1172
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1172
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1178
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1178
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1181
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1181
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1187
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1187
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1201
msgid "Show &labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1201
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1204
msgid "&Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1204 src/slic3r/GUI/Plater.cpp:2255
msgid "Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1216 src/slic3r/GUI/MainFrame.cpp:1279
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1217
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1218
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1219 src/slic3r/GUI/MainFrame.cpp:1280
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1222 src/slic3r/GUI/MainFrame.cpp:1283
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1244
msgid "&Open G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1260
msgid "Open &PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1305
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1306
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1308
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1331
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1342
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1349
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384
#, possible-c-format
msgid "Save %s file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1384
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1396
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1405 src/slic3r/GUI/Plater.cpp:3023
#: src/slic3r/GUI/Plater.cpp:5604 src/slic3r/GUI/Tab.cpp:1589
#: src/slic3r/GUI/Tab.cpp:4133
msgid "Slicing"
msgstr ""

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:1407
#, possible-c-format
msgid "Processing %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1430
msgid "%1% was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1432
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1447
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1457
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1469
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1469 src/libslic3r/PrintConfig.cpp:3816
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1483
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1502 src/slic3r/GUI/MainFrame.cpp:1564
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1538
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1585
#, possible-c-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:461
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:472
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:477
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:480
#: src/slic3r/GUI/Mouse3DController.cpp:501
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:492
#: src/slic3r/GUI/Mouse3DController.cpp:501
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:498
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:513
msgid "Options:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:516
msgid "Swap Y/Z axes"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:70
#, possible-c-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:71
#, possible-c-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:471
msgid "3D Mouse disconnected."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:474
msgid "Configuration update is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:474
msgid "See more."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:481
msgid "New version is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:481
msgid "See Releases page."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:484
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:493
#: src/slic3r/GUI/NotificationManager.cpp:503
msgid "More"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:863
#: src/slic3r/GUI/NotificationManager.cpp:1134
msgid "Export G-Code."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:904
msgid "Open Folder."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:940
msgid "Eject drive"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1053
#: src/slic3r/GUI/NotificationManager.cpp:1069
#: src/slic3r/GUI/NotificationManager.cpp:1080
msgid "ERROR:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1058
#: src/slic3r/GUI/NotificationManager.cpp:1073
#: src/slic3r/GUI/NotificationManager.cpp:1088
msgid "WARNING:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1137
msgid "Slicing finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1184
msgid "Exporting finished."
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:58
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:62
#: src/slic3r/GUI/ObjectDataViewModel.cpp:225
#, possible-c-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3980
#: src/slic3r/GUI/Tab.cpp:4062
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:259
#, possible-c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:262
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:265
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:267
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:275
#, possible-c-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:276
msgid "Error loading shaders"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:334
msgctxt "Layers"
msgid "Top"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:334
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:51
msgid "Delete this preset from this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:81
msgid "This printer will be shown in the presets list as"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:155
msgid "Physical Printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:161
msgid "Type here the name of your printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:172
msgid "Descriptive name for the printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Add preset for this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 src/slic3r/GUI/Tab.cpp:2078
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:260
msgid "Connection to printers connected via the print host failed."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:302
msgid "Test"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:307
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:319
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:329
msgid "Refresh Printers"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:356
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:366
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:395
#: src/libslic3r/PrintConfig.cpp:124
msgid "HTTPS CA File"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:396
#, possible-c-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:397
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:543
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:547
msgid "You should change the name of your printer device."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:555
msgid "Printer with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:556
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:582
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:630
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:163
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:164
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:165
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:168
msgid "Manifold"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:218
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1159
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1171
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1178
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:240
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:241
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:243
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:360
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:2217
#: src/libslic3r/PrintConfig.cpp:3012
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:489
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:364
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:396 src/slic3r/GUI/Tab.cpp:1481
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:398
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:406
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:503
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:505
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:506
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:692
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:753 src/slic3r/GUI/Plater.cpp:6082
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:768 src/slic3r/GUI/Plater.cpp:3023
#: src/slic3r/GUI/Plater.cpp:5607
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:923
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1068
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1097
msgid "Yes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1118
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1121
msgid "object"
msgid_plural "objects"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1121
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1159
msgid "Used Filament (in)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1161 src/slic3r/GUI/Plater.cpp:1214
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1161 src/slic3r/GUI/Plater.cpp:1214
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1171
msgid "Used Filament (in³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1197
msgid "Filament at extruder %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1203
msgid "(including spool)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1212 src/libslic3r/PrintConfig.cpp:847
#: src/libslic3r/PrintConfig.cpp:2827 src/libslic3r/PrintConfig.cpp:2828
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1230
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1240
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1411 src/slic3r/GUI/Plater.cpp:4942
#, possible-c-format
msgid "%s - Drop project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1418 src/slic3r/GUI/Plater.cpp:4949
msgid "Open as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1419 src/slic3r/GUI/Plater.cpp:4950
msgid "Import geometry only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1420 src/slic3r/GUI/Plater.cpp:4951
msgid "Import config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1423 src/slic3r/GUI/Plater.cpp:4954
msgid "Select an action to apply to the file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1424 src/slic3r/GUI/Plater.cpp:4955
msgid "Action"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1432 src/slic3r/GUI/Plater.cpp:4963
msgid "Don't show again"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1477 src/slic3r/GUI/Plater.cpp:5000
msgid "You can open only one .gcode file at a time."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1478 src/slic3r/GUI/Plater.cpp:5001
msgid "Drag and drop G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1532 src/slic3r/GUI/Plater.cpp:4817
#: src/slic3r/GUI/Plater.cpp:5055
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1554 src/slic3r/GUI/Plater.cpp:5081
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1559 src/slic3r/GUI/Plater.cpp:5086
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1662
msgid "Fill bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1668
msgid "Optimize Rotation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1674
msgid "Import SLA archive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2137
#, possible-c-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2142
#, possible-c-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2161
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2254
msgid "Expand sidebar"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2327
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2337
msgid "Loading file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2427
#, possible-c-format
msgid ""
"The object in file %s looks like saved in inches.\n"
"Should I consider it as a saved in inches and convert it?"
msgid_plural ""
"Some objects in file %s look like saved in inches.\n"
"Should I consider them as a saved in inches and convert them?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2431
msgid "The object appears to be saved in inches"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2439
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2442 src/slic3r/GUI/Plater.cpp:2495
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2449
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2450
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2472
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2492
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2508
msgid "Loaded"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2610
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2611
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2673
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2680
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2686
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2692
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2788
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2799
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2871
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2882
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3007 src/slic3r/GUI/Plater.cpp:3744
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3017
msgid "Ready to slice"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3055 src/slic3r/GUI/PrintHostDialogs.cpp:275
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3074
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3191
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3226
msgid "It is not allowed to change the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3226
msgid "Do you want to retry"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3244
msgid "Reload from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3337
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3342
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3361
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3388
msgid ""
"ERROR: Please close all manipulators available from the left toolbar before "
"fixing the mesh."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3394
msgid "Fix through NetFabb"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3411
msgid "Custom supports and seams were removed after repairing the mesh."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3702
msgid "There are active warnings concerning sliced models:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3712
msgid "generated warnings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3752 src/slic3r/GUI/PrintHostDialogs.cpp:276
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4019 src/slic3r/GUI/Plater.cpp:4043
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4028
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4030
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4032
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4032
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4034
msgid "Fill bed with instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4034
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4053
msgid "Reload the selected object from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4056
msgid "Export the selected object as STL file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4086
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4086
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4088
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4088
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4090
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4090
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4093
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4093
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4105
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4105 src/slic3r/GUI/Plater.cpp:4125
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4107
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4107 src/slic3r/GUI/Plater.cpp:4143
msgid "Split the selected object into individual sub-parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4110 src/slic3r/GUI/Plater.cpp:4125
#: src/slic3r/GUI/Plater.cpp:4143 src/libslic3r/PrintConfig.cpp:3840
msgid "Split"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4110
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4132
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4133
msgid "Optimize the rotation of the object for better print results."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4213
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4585
msgid ""
"%1% printer was active at the time the target Undo / Redo snapshot was "
"taken. Switching to %1% printer requires reloading of %1% presets."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4789
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4821
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4887
msgid "The selected file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4887
msgid "does not contain valid gcode."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4888
msgid "Error while loading .gcode file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5130
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5138
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5146
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5180
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5211
msgid "Enter the number of copies:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5212
msgid "Copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5216
#, possible-c-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5282
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5339
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5339
msgid "Save SL1 file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5486
#, possible-c-format
msgid "STL file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5503
#, possible-c-format
msgid "AMF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5506
#, possible-c-format
msgid "Error exporting AMF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5535
#, possible-c-format
msgid "3MF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5540
#, possible-c-format
msgid "Error exporting 3MF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6081
msgid "Export"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6178
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:56 src/slic3r/GUI/Tab.cpp:2112
#: src/slic3r/GUI/Tab.cpp:2299 src/slic3r/GUI/Tab.cpp:2407
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1082
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:69
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:71
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:77
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:79
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:85
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:87
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:96
msgid ""
"If enabled, PrusaSlicer will check for the new versions of itself online. "
"When a new version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:102
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:104
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:114
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:121
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:131
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:136
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:138
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:144
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:146
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:152
msgid "Show drop project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:154
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application, shows a dialog asking to select the action to take on the file "
"to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:161 src/slic3r/GUI/Preferences.cpp:165
msgid "Allow just a single PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:163
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:167
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:173
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:671
msgid "Ask for unsaved changes when closing application"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:175
msgid "When closing the application, always ask for unsaved changes"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:180
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:672
msgid "Ask for unsaved changes when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:182
msgid "Always ask for unsaved changes when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:190
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:192
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:201
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:203
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:211 src/slic3r/GUI/Preferences.cpp:213
msgid "Show splash screen"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:220
msgid "Enable support for legacy 3DConnexion devices"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:222
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:232
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:237
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:239
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:244
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:246
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:251
msgid "Reverse direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:253
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:261
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:276
msgid "Sequential slider applied only to top layer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:278
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer. If disabled, changes made using the sequential slider, "
"in preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:285
msgid "Show sidebar collapse/expand button"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:287
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:292
msgid "Suppress to open hyperlink in browser"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:294
msgid ""
"If enabled, the descriptions of configuration parameters in settings tabs "
"wouldn't work as hyperlinks. If disabled, the descriptions of configuration "
"parameters in settings tabs will work as hyperlinks."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:300
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:302
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:321
msgid "Render"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:326
msgid "Use environment map"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:328
msgid "If enabled, renders object using the environment map."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:353
#, possible-c-format
msgid "You need to restart %s to make the changes effective."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:432
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:447
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:478
msgid "Old regular layout with the tab bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:479
msgid "New layout, access via settings button in the top menu"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:480
msgid "Settings in non-modal window"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:489
msgid "Layout Options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:510
msgid "Text color Settings"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:224
#: src/slic3r/GUI/PresetComboBoxes.cpp:262
#: src/slic3r/GUI/PresetComboBoxes.cpp:788
#: src/slic3r/GUI/PresetComboBoxes.cpp:838
#: src/slic3r/GUI/PresetComboBoxes.cpp:963
#: src/slic3r/GUI/PresetComboBoxes.cpp:1007
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:266
#: src/slic3r/GUI/PresetComboBoxes.cpp:842
#: src/slic3r/GUI/PresetComboBoxes.cpp:1011
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:277
msgid "Incompatible presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:312
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:314
msgid "Delete Physical Printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:651
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:707
#: src/slic3r/GUI/PresetComboBoxes.cpp:737
msgid "Add/Remove presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:712
#: src/slic3r/GUI/PresetComboBoxes.cpp:742 src/slic3r/GUI/Tab.cpp:3004
msgid "Add physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:726
msgid "Edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:730 src/slic3r/GUI/Tab.cpp:3004
msgid "Edit physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:733
msgid "Delete physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:853
#: src/slic3r/GUI/PresetComboBoxes.cpp:1025
msgid "Physical printers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:877
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:879
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:881
#: src/slic3r/GUI/PresetComboBoxes.cpp:1049
msgid "Add/Remove printers"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:32
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:39
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:49
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:51
msgid "During the other layers, fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:51
msgid "Fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:53
msgid "except for the first %1% layers."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
msgid "except for the first layer."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:58
msgid "During the other layers, fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:58
msgid "Fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:159
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:168
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:177
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:195
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:206
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:216
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:222
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:222
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:222
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:223
msgid "flow rate is maximized"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:226
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:227
msgid "when printing"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:228
msgid "with a volumetric rate"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:232
#, possible-c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:250
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:266
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:273
#, possible-c-format
msgid "%d lines: %.2f mm"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:277
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:306
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:319
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:322
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:325
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:338
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:341
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:344
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:37
msgid "Start printing after upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:45
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:58
msgid "Group"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:187
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:188
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:189
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:190
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:191
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:192
msgid "Error Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:195
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:197
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:239
#: src/slic3r/GUI/PrintHostDialogs.cpp:272
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:273
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:277
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:315
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
#: src/libslic3r/PrintConfig.cpp:731 src/libslic3r/PrintConfig.cpp:775
#: src/libslic3r/PrintConfig.cpp:790 src/libslic3r/PrintConfig.cpp:2725
#: src/libslic3r/PrintConfig.cpp:2734 src/libslic3r/PrintConfig.cpp:2844
#: src/libslic3r/PrintConfig.cpp:2852 src/libslic3r/PrintConfig.cpp:2860
#: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2875
#: src/libslic3r/PrintConfig.cpp:2883
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:688
#: src/libslic3r/PrintConfig.cpp:1547
msgid "mm³/s"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:57
#, possible-c-format
msgid "Save %s as:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:110
msgid "the following suffix is not allowed:"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:116
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:122
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:127
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:134
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:136
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:137
msgid "Note: This preset will be replaced after saving"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:142
msgid "The name cannot be empty."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:147
msgid "The name cannot start with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:152
msgid "The name cannot end with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:157
msgid "The name cannot be the same as a preset alias name."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:191
#: src/slic3r/GUI/SavePresetDialog.cpp:197
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:220
msgctxt "PresetName"
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:278
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:311
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:314
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:315
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:316
msgid "Just switch to \"%1%\" preset"
msgstr ""

#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2435
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2429
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:172
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:213
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:245
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:264
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:282
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:301
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:402
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:428
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:960
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1487
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:1487
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:83
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:164
msgid "Copy to Clipboard"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:109 src/libslic3r/PrintConfig.cpp:346
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:110
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:115 src/libslic3r/PrintConfig.cpp:361
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:116
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:211
#, possible-c-format
msgid "Save current %s"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:212
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:216
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:220
msgid "Search in settings [%1%]"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1237
msgid "Detach from system preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1250
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1251
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1254
msgid "Modifications to the current profile will be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1257
msgid ""
"This action is not revertable.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1259
msgid "Detach preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1285
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1287
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1289
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1293
msgid "Current preset is inherited from"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1297
msgid "It can't be deleted or modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1298
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1299
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1303
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1309
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1317
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1320
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1334
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1338
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1346
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1347
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1385 src/slic3r/GUI/Tab.cpp:4060
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1391
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1403
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1404 src/libslic3r/PrintConfig.cpp:2069
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1409
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1420
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1432
msgid "Fuzzy skin (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1460
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1494
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1498
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1513
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1526
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1529
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1532
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1539
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1547
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1555
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1573
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1583
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1586
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1595
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1598 src/slic3r/GUI/Tab.cpp:4136
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1599
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1601
msgid "Extruder clearance"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1606 src/slic3r/GUI/Tab.cpp:4137
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1613 src/libslic3r/PrintConfig.cpp:1751
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1619 src/slic3r/GUI/Tab.cpp:1620
#: src/slic3r/GUI/Tab.cpp:1941 src/slic3r/GUI/Tab.cpp:1942
#: src/slic3r/GUI/Tab.cpp:2280 src/slic3r/GUI/Tab.cpp:2281
#: src/slic3r/GUI/Tab.cpp:2356 src/slic3r/GUI/Tab.cpp:2357
#: src/slic3r/GUI/Tab.cpp:4003 src/slic3r/GUI/Tab.cpp:4004
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1626 src/slic3r/GUI/Tab.cpp:1949
#: src/slic3r/GUI/Tab.cpp:2287 src/slic3r/GUI/Tab.cpp:2363
#: src/slic3r/GUI/Tab.cpp:4011 src/slic3r/GUI/Tab.cpp:4142
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1627 src/slic3r/GUI/Tab.cpp:1950
#: src/slic3r/GUI/Tab.cpp:2288 src/slic3r/GUI/Tab.cpp:2364
#: src/slic3r/GUI/Tab.cpp:4012 src/slic3r/GUI/Tab.cpp:4143
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1707
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1829
msgid "Temperature"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1830
msgid "Nozzle"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1835
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1840
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1842 src/libslic3r/PrintConfig.cpp:1654
#: src/libslic3r/PrintConfig.cpp:2517
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1853
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1864
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1870
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1877
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1887
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1890
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1903
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1926 src/slic3r/GUI/Tab.cpp:2219
#: src/libslic3r/PrintConfig.cpp:2152
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1927 src/slic3r/GUI/Tab.cpp:2220
#: src/libslic3r/PrintConfig.cpp:2102 src/libslic3r/PrintConfig.cpp:2117
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1934 src/slic3r/GUI/Tab.cpp:2227
#: src/libslic3r/PrintConfig.cpp:466 src/libslic3r/PrintConfig.cpp:476
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1984
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2080
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2113 src/slic3r/GUI/Tab.cpp:2300
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2122 src/slic3r/GUI/UnsavedChangesDialog.cpp:1082
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2127
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2155
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2158 src/slic3r/GUI/Tab.cpp:2566
#: src/libslic3r/PrintConfig.cpp:1623
msgid "Nozzle diameter"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2234 src/libslic3r/PrintConfig.cpp:209
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2241 src/libslic3r/PrintConfig.cpp:1362
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2248 src/libslic3r/PrintConfig.cpp:2410
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2255
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2262
msgid "Color Change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2268 src/libslic3r/PrintConfig.cpp:2143
msgid "Pause Print G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2274
msgid "Template Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2307
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2322
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2323
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2329 src/slic3r/GUI/Tab.cpp:3987
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2346 src/slic3r/GUI/Tab.cpp:3983
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2405 src/slic3r/GUI/Tab.cpp:2499
#: src/libslic3r/PrintConfig.cpp:1391 src/libslic3r/PrintConfig.cpp:1426
#: src/libslic3r/PrintConfig.cpp:1443 src/libslic3r/PrintConfig.cpp:1460
#: src/libslic3r/PrintConfig.cpp:1476 src/libslic3r/PrintConfig.cpp:1486
#: src/libslic3r/PrintConfig.cpp:1496 src/libslic3r/PrintConfig.cpp:1506
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2428
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2434
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2443
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2448
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2455
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2460
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2524 src/slic3r/GUI/Tab.cpp:2532
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2533
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2564
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2588
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2593
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2599
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2612
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2619
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2797
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2799
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3390
msgid "Detached"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3453
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3453
msgid "delete"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3462
msgid "It's a last preset for this physical printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3467
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3479
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3484
msgid "Note, that selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that selected preset will be deleted from these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3489
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3494
msgid ""
"Note, that this printer will be deleted after deleting of the selected "
"preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting of the selected "
"preset."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3499
msgid "Are you sure you want to %1% the selected preset?"
msgstr ""

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3504
msgid "%1% Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3585 src/slic3r/GUI/Tab.cpp:3657
msgid "Set"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3721
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3724
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3728
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3750
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3752
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3754
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3756
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3761
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3763
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3766
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3768
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3778
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3780
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3783
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3786
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3788
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3794
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3795
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3801
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3802
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3946 src/slic3r/GUI/Tab.cpp:3948
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4070
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4075
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4098
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4103
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4177
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4179 src/libslic3r/PrintConfig.cpp:3091
msgid "Object elevation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4179 src/libslic3r/PrintConfig.cpp:3193
msgid "Pad around object"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:370 src/slic3r/GUI/Tab.hpp:492
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:401
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:442
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:476
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:149
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:158
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:857
msgid "Undef"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:537
msgid "PrusaSlicer is closing: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:554
msgid "Switching Presets: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:620
msgid "Old Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:621
msgid "New Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:652
msgid "Transfer"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:653
msgid "Discard"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:654
msgid "Save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:674
msgid "PrusaSlicer will remember your action."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:676
msgid ""
"You will not be asked about the unsaved changes the next time you close "
"PrusaSlicer."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:677
msgid ""
"You will not be asked about the unsaved changes the next time you switch a "
"preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:678
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:680
msgid "PrusaSlicer: Don't ask me again"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:747
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:749
msgid "All settings changes will be discarded."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:752
msgid "Save the selected options."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:752
msgid "Transfer the selected settings to the newly selected preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:756
msgid "Save the selected options to preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:757
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1021
msgid "The following presets were modified:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1026
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1030
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1031
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1077
msgid "Extruders count"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1199
msgid "Old value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
msgid "New value"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, possible-c-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:53
msgid "Changelog && Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125
#: src/slic3r/GUI/UpdateDialogs.cpp:183
msgid "Open changelog page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173
msgid "Comment:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210
#, possible-c-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:148
msgid "You must install a configuration update."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
#, possible-c-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246
#, possible-c-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:211
#, possible-c-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:216
#, possible-c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:225
#, possible-c-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:230
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:249
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:270
#, possible-c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:287
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:304
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:304
msgid "No updates available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:309
#, possible-c-format
msgid "%s has no configuration updates available."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:15
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:41
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:83
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:85
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:89
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:91
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:254
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:255
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:263
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:264
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:276
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:285
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:286
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:365
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:627
#, possible-c-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:628
#, possible-c-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:84
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:90
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:92
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:145
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:148
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model repair failed:"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:74
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:76
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:83
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:91
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:185
msgid "Connection to Prusa SL1 works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:191
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:727
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:731
#, possible-c-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:734
#, possible-c-format
msgid "requires max. %s"
msgstr ""

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""

#: src/slic3r/Utils/Http.cpp:78
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""

#: src/slic3r/Utils/Http.cpp:82
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""

#: src/slic3r/Utils/Process.cpp:157
msgid "Open G-code file:"
msgstr ""

#: src/libslic3r/GCode.cpp:518
msgid "There is an object with no extrusions on the first layer."
msgstr ""

#: src/libslic3r/GCode.cpp:536
msgid "Empty layers detected, the output would not be printable."
msgstr ""

#: src/libslic3r/GCode.cpp:537
msgid "Print z"
msgstr ""

#: src/libslic3r/GCode.cpp:538
msgid ""
"This is usually caused by negligibly small extrusions or by a faulty model. "
"Try to repair the model or change its orientation on the bed."
msgstr ""

#: src/libslic3r/GCode.cpp:1274
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""

#: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:360
msgid "Mixed"
msgstr ""

#: src/libslic3r/Flow.cpp:61
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1641
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:958
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Preset.cpp:1304
msgid "filament"
msgstr ""

#: src/libslic3r/Print.cpp:1257
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:1260
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:1264
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:1266
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:1275
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""

#: src/libslic3r/Print.cpp:1283
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:1296
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1302
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
"RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:1304
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:1306
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""

#: src/libslic3r/Print.cpp:1308
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:1310
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:1331
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:1333
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:1335
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:1337
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:1379
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:1405
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:1418
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1421
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:1432
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1440
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:1444
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/libslic3r/Print.cpp:1466
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1471
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1630
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:1656
msgid "Generating skirt"
msgstr ""

#: src/libslic3r/Print.cpp:1665
msgid "Generating brim"
msgstr ""

#: src/libslic3r/Print.cpp:1691
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1695
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/SLA/Pad.cpp:532
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:630
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:642
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:648
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:663
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:670
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:786
msgid "Slicing done"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:44
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:45
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:46
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:359
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:48
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:49
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:50
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:65
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:66
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:192
msgid "Too many overlapping holes."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:201
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:247
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:411 src/libslic3r/SLAPrintSteps.cpp:420
#: src/libslic3r/SLAPrintSteps.cpp:459
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:451
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:619
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:77
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:56
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:61
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:66
msgid "G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:67
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 files, in the following "
"format: \"XxY, XxY, ...\""
msgstr ""

#: src/libslic3r/PrintConfig.cpp:75
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:82
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:83
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:91
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:93
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:101
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:102
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:110
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:111
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:118
msgid "Name of the printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:125
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:131
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:133
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:149
msgid "Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:155
msgid "Printer preset name"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:156
msgid "Related printer preset name"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:161
msgid "Authorization Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:166
msgid "API key"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:167
msgid "HTTP digest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:180
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:181
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:188
msgid "Avoid crossing perimeters - Max detour length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:190
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:193
msgid "mm or % (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:199 src/libslic3r/PrintConfig.cpp:2380
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:200
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:203
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:210
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:220
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:221
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:232
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:233
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:241
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:243
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:249
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:250
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:252 src/libslic3r/PrintConfig.cpp:420
#: src/libslic3r/PrintConfig.cpp:965 src/libslic3r/PrintConfig.cpp:1168
#: src/libslic3r/PrintConfig.cpp:1449 src/libslic3r/PrintConfig.cpp:1498
#: src/libslic3r/PrintConfig.cpp:1508 src/libslic3r/PrintConfig.cpp:1701
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:258
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:260
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:263 src/libslic3r/PrintConfig.cpp:877
#: src/libslic3r/PrintConfig.cpp:1942 src/libslic3r/PrintConfig.cpp:1952
#: src/libslic3r/PrintConfig.cpp:2210 src/libslic3r/PrintConfig.cpp:2365
#: src/libslic3r/PrintConfig.cpp:2564 src/libslic3r/PrintConfig.cpp:3065
#: src/libslic3r/PrintConfig.cpp:3186
msgid "°"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:269
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:270
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:271 src/libslic3r/PrintConfig.cpp:889
#: src/libslic3r/PrintConfig.cpp:1337 src/libslic3r/PrintConfig.cpp:1516
#: src/libslic3r/PrintConfig.cpp:1579 src/libslic3r/PrintConfig.cpp:1834
#: src/libslic3r/PrintConfig.cpp:2742 src/libslic3r/PrintConfig.cpp:2979
#: src/libslic3r/PrintConfig.cpp:3105
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:278
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:280
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:290
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:292
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:293 src/libslic3r/PrintConfig.cpp:696
#: src/libslic3r/PrintConfig.cpp:704 src/libslic3r/PrintConfig.cpp:713
#: src/libslic3r/PrintConfig.cpp:721 src/libslic3r/PrintConfig.cpp:748
#: src/libslic3r/PrintConfig.cpp:767 src/libslic3r/PrintConfig.cpp:1104
#: src/libslic3r/PrintConfig.cpp:1283 src/libslic3r/PrintConfig.cpp:1356
#: src/libslic3r/PrintConfig.cpp:1432 src/libslic3r/PrintConfig.cpp:1466
#: src/libslic3r/PrintConfig.cpp:1478 src/libslic3r/PrintConfig.cpp:1488
#: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:1597
#: src/libslic3r/PrintConfig.cpp:1731 src/libslic3r/PrintConfig.cpp:1909
#: src/libslic3r/PrintConfig.cpp:1918 src/libslic3r/PrintConfig.cpp:2344
#: src/libslic3r/PrintConfig.cpp:2471
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:300
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:302
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:309
msgid "Brim type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:311
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:317
msgid "No brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:318
msgid "Outer brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:319
msgid "Inner brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:320
msgid "Outer and inner brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:325
msgid "Brim offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:327
msgid "The offset of the brim from the printed object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:333
msgid "Clip multi-part objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:334
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:341
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:342
msgid "Heights at which a filament change is to occur."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:352
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:353
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:367
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:368
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:385
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:386
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:394
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:395
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:400
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:401
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:408
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:409
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:417
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:426
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:427
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:433
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:434 src/libslic3r/PrintConfig.cpp:2909
#: src/libslic3r/PrintConfig.cpp:2920
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:440
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:441
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:450
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:452
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:458
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:459
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:467
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:477
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:488
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:490
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:496
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:498
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:508 src/libslic3r/PrintConfig.cpp:943
#: src/libslic3r/PrintConfig.cpp:2325
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:509
msgid "Monotonic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:510 src/libslic3r/PrintConfig.cpp:944
msgid "Aligned Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:511 src/libslic3r/PrintConfig.cpp:950
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:512 src/libslic3r/PrintConfig.cpp:954
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:513 src/libslic3r/PrintConfig.cpp:955
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:514 src/libslic3r/PrintConfig.cpp:956
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:520
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:522
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:531 src/libslic3r/PrintConfig.cpp:542
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:533
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:536 src/libslic3r/PrintConfig.cpp:646
#: src/libslic3r/PrintConfig.cpp:987 src/libslic3r/PrintConfig.cpp:1000
#: src/libslic3r/PrintConfig.cpp:1193 src/libslic3r/PrintConfig.cpp:1248
#: src/libslic3r/PrintConfig.cpp:1274 src/libslic3r/PrintConfig.cpp:1721
#: src/libslic3r/PrintConfig.cpp:2050 src/libslic3r/PrintConfig.cpp:2199
#: src/libslic3r/PrintConfig.cpp:2267 src/libslic3r/PrintConfig.cpp:2428
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:544
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:547 src/libslic3r/PrintConfig.cpp:1009
#: src/libslic3r/PrintConfig.cpp:2009 src/libslic3r/PrintConfig.cpp:2061
#: src/libslic3r/PrintConfig.cpp:2311 src/libslic3r/PrintConfig.cpp:2441
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:554
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:556
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:562
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:564
#, possible-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:574
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:586
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:597
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:607
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:608 src/libslic3r/PrintConfig.cpp:670
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:614
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:615
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:624
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:625
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:630
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:631
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:640
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:642
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:653
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:654
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:659
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:660
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:662 src/libslic3r/PrintConfig.cpp:1997
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:669
msgid "Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:675
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:676
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:684 src/libslic3r/PrintConfig.cpp:1544
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:685
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:694
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:695
msgid "Speed used for loading the filament on the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:702
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:703
msgid "Speed used at the very beginning of loading phase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:710
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:711
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:719
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:720
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:727
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:728
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:737
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:738
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:746
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:747
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:754
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:755
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:759
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:765
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:766
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:773
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:774
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:781
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:782
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:788
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:789
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:797
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:2820
#: src/libslic3r/PrintConfig.cpp:2821
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:805
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:808
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:813
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:814
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:841
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:842
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:848
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:849
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:854
msgid "Spool weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:855
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:859
msgid "g"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:868 src/libslic3r/PrintConfig.cpp:2904
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:872
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:874
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:886
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:888
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:923
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:925
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:945
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:946
msgid "Triangles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:947
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:948
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:949
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:951 src/libslic3r/PrintConfig.cpp:2327
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:952
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:953
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:957
msgid "Adaptive Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:958
msgid "Support Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:971
#: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:1015
msgid "First layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:963
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:972
msgid "First layer bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:973
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:983
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:996
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1005
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1006
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1016
msgid "First layer nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1017
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1025
msgid "Full fan speed at layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1026
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1036
msgid "Fuzzy skin perimeter mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1037 src/libslic3r/PrintConfig.cpp:1083
#: src/libslic3r/PrintConfig.cpp:1092
msgid "Fuzzy Skin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1038
msgid "Fuzzy skin perimeter mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1046
msgid "External"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1047
msgid "External (skip first layer)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1048
msgid "All perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1082
msgid "Fuzzy skin thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1091
msgid "Fuzzy skin point distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1102
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1110
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1111
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1118
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1119
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1144
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1149
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1150
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1157
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1158
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1166
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1174
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1176
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1179
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1185
msgid "Length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1187
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1202
msgid "0 (no open anchors)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1207 src/libslic3r/PrintConfig.cpp:1229
msgid "1000 (unlimited)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1212
msgid "Maximum length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1214
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1224
msgid "0 (not anchored)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1234
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1236
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1244
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1254
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1255
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1260
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1262
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1269
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1271
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1282
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1290
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1291
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1304
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1305
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1313
msgid "Enable ironing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1314
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1320 src/libslic3r/PrintConfig.cpp:1322
msgid "Ironing Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1327
msgid "All top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1328
msgid "Topmost surface only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1329
msgid "All solid surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1334
msgid "Flow rate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1336
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1344
msgid "Spacing between ironing passes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1346
msgid "Distance between ironing lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1363
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1374
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1375
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1383
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1384
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1389
msgid "How to apply limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1390
msgid "Purpose of Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1392
msgid "How to apply the Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1397
msgid "Emit to G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1398
msgid "Use for time estimate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1399
msgid "Ignore"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1422
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1423
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1424
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1425
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1428
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1429
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1430
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1431
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1439
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1440
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1441
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1442
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1445
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1446
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1447
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1448
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1456
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1457
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1458
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1459
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1462
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1463
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1464
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1465
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1475
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1477
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1485
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1487
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1495
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1497
msgid "Maximum acceleration when extruding (M204 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1505
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1507
msgid "Maximum acceleration when retracting (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1514 src/libslic3r/PrintConfig.cpp:1523
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1515
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1524
#, possible-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1534
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1535
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1545
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1554
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1555 src/libslic3r/PrintConfig.cpp:1566
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1559 src/libslic3r/PrintConfig.cpp:1570
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1565
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:1586
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1578
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1587
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1595
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1596
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1603
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1604
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1613
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1614
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1624
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1629
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1630
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1647
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1648
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1655
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1662
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1663
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1672
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1674
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1680
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1681
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1689
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1690
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1698 src/libslic3r/PrintConfig.cpp:1715
#: src/libslic3r/PrintConfig.cpp:1728 src/libslic3r/PrintConfig.cpp:1738
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1699
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1706
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1708
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1717
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1730
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1740
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1744
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1752
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1764
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1765
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1770
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1771
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1779
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1780
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1785
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1786
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1803
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1805
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1813
msgid "Resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1814
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1824
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1825
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1831
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1832
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1839
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1840
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1845 src/libslic3r/PrintConfig.cpp:1853
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1846
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1847
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1849 src/libslic3r/PrintConfig.cpp:1858
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1854
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1855
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1863
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1864
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1871
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1872
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1873
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1880
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1881
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1882
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1890 src/libslic3r/PrintConfig.cpp:1898
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1891
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1899
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1906 src/libslic3r/PrintConfig.cpp:1907
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1908
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1914 src/libslic3r/PrintConfig.cpp:1915
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1916
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1923
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1925
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1931
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1932
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1933
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1941
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1943
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1944
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1951
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1953
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1954
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1961
msgid "Distance from object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1962
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1969
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1970
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1977
msgid "Draft shield"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1978
msgid ""
"If enabled, the skirt will be as tall as a highest printed object. This is "
"useful to protect an ABS or ASA print from warping and detaching from print "
"bed due to wind draft."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1984
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1985
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1986
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1994
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1995
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2004
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2006
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2016
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2018
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2019
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2025
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2027
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2033
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2035
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2047
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2058
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2070
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2076 src/libslic3r/PrintConfig.cpp:2077
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2083
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2084
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2092
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2093
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2103
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2118
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2134
msgid "Color change G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2135
msgid "This G-code will be used as a code for the color change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2144
msgid "This G-code will be used as a code for the pause print"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2153
msgid "This G-code will be used as a custom code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2161
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2162
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2167
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2168
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2173
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2174
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2181
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2183
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2187
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2189
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2195
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2197
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2207
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2209
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2219 src/libslic3r/PrintConfig.cpp:3014
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2225
msgid "Contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2227
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2234
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2235
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2240
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2242
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2247
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2253
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2255
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2264
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2273
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2275
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2280
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2282
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2289
msgid "Interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2291
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2298
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2300
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2309
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2318
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2320
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2326
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2332
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2334
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2343
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2350
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2352
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2358
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2360
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2372
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2374
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2381
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2384
msgid "Nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2390
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2392
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2398
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2399
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2411
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {previous_extruder} and "
"{next_extruder} can be used. When a tool-changing command which changes to "
"the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2424
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2436
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2451
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2452
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2460
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2463
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2470
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2478
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2479
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2485
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2486
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2492
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2493
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2503
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2504
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2510
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2511
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2518
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2524
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2525
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2531
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2532
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2541
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2542
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2548
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2549
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2556
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2562
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2563
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2570
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2571
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2578
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2579
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2585
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2586
msgid "Maximal distance between supports on sparse infill sections."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2592
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2594
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2602
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2603
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2670
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2671
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2676
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2677
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2682
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2684
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2690
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2695
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2696
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2697
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2702
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2703
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2704
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2709
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2710
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2716
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2717
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2722
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2723
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2724
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2731
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2732
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2733
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2740
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2741
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2748 src/libslic3r/PrintConfig.cpp:2749
#: src/libslic3r/PrintConfig.cpp:2750
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2756 src/libslic3r/PrintConfig.cpp:2757
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2758
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2764
msgid "Elephant foot minimum width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2766
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2773 src/libslic3r/PrintConfig.cpp:2774
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2775
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2787 src/libslic3r/PrintConfig.cpp:2788
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2799 src/libslic3r/PrintConfig.cpp:2800
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2806 src/libslic3r/PrintConfig.cpp:2807
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2808
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2813 src/libslic3r/PrintConfig.cpp:2814
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2815
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2822
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2829
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2834
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2835
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2842 src/libslic3r/PrintConfig.cpp:2843
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2850 src/libslic3r/PrintConfig.cpp:2851
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2858 src/libslic3r/PrintConfig.cpp:2859
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2865 src/libslic3r/PrintConfig.cpp:2866
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2873 src/libslic3r/PrintConfig.cpp:2874
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2881 src/libslic3r/PrintConfig.cpp:2882
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2888 src/libslic3r/PrintConfig.cpp:2889
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2895
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2896
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2908 src/libslic3r/PrintConfig.cpp:2919
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2930
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2932
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2937
msgid "Pinhead front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2939
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2946
msgid "Head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2948
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2955
msgid "Pinhead width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2957
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2965
msgid "Pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2967
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2975
msgid "Small pillar diameter percent"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2977
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2986
msgid "Max bridges on a pillar"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2988
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2996
msgid "Pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2997
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3005
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3006
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3007
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3019
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3021
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3030
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3032
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3040
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3042
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3049
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3052
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3062
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3064
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3072
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3074
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3081
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3083
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3093
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3104
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3110
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3112
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3118
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3120
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3125
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3127
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3135
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3136
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3149
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3150
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3160
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3162
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3182
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3184
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3195
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3200
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3202
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3207
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3209
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3218
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3220
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3227
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3229
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3236
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3239
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3246
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3248
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3253
msgid "Wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3255
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3263
msgid "Accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3265
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3275
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3683
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3684
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3695
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3696
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3701
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3702
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3706
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3707
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3711
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3712
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3717
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3722
msgid "G-code viewer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3723
msgid "Visualize an already sliced and saved G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3728
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3729
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3734
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3735
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3740
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3741
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3745
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3746
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3750
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3751
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3755
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3756
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3766
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3767
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3772
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3793
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3794
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3798
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3799
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3802
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3803
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3807
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3808
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3812
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3817
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3821
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3825
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3826
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3830
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3831
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3836
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3841
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3844
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3845
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3854
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3855
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3858
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3859
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3862
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3863
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3867
msgid "Single instance mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3868
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3879
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3880
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3883
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3884
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3890
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3891
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/PrintObject.cpp:112
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObject.cpp:157
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:260
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:421
msgid "Generating support material"
msgstr ""