# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-12 21:27+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:43 src/slic3r/GUI/AboutDialog.cpp:48 #: src/slic3r/GUI/AboutDialog.cpp:317 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:281 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:141 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:212 src/slic3r/GUI/AboutDialog.cpp:215 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:256 src/slic3r/GUI/GUI_App.cpp:239 #: src/slic3r/GUI/MainFrame.cpp:164 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:283 src/slic3r/GUI/GUI_App.cpp:244 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:284 src/slic3r/GUI/GUI_App.cpp:244 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:285 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:286 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:77 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:160 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?\n" "Error message: %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:166 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:169 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:175 msgid "Unknown error occured during exporting G-code." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:180 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:540 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:182 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:187 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:236 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:231 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:543 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:566 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:161 #: src/slic3r/GUI/Tab.cpp:2506 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:94 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:752 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:110 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:121 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:240 #: src/slic3r/GUI/ConfigWizard.cpp:1346 src/slic3r/GUI/ConfigWizard.cpp:1360 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87 #: src/slic3r/GUI/GCodeViewer.cpp:2219 src/slic3r/GUI/GCodeViewer.cpp:2225 #: src/slic3r/GUI/GCodeViewer.cpp:2233 src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75 #: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:93 #: src/libslic3r/PrintConfig.cpp:131 src/libslic3r/PrintConfig.cpp:229 #: src/libslic3r/PrintConfig.cpp:287 src/libslic3r/PrintConfig.cpp:362 #: src/libslic3r/PrintConfig.cpp:370 src/libslic3r/PrintConfig.cpp:420 #: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:559 #: src/libslic3r/PrintConfig.cpp:577 src/libslic3r/PrintConfig.cpp:755 #: src/libslic3r/PrintConfig.cpp:1167 src/libslic3r/PrintConfig.cpp:1348 #: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1427 #: src/libslic3r/PrintConfig.cpp:1445 src/libslic3r/PrintConfig.cpp:1503 #: src/libslic3r/PrintConfig.cpp:1513 src/libslic3r/PrintConfig.cpp:1635 #: src/libslic3r/PrintConfig.cpp:1643 src/libslic3r/PrintConfig.cpp:1684 #: src/libslic3r/PrintConfig.cpp:1692 src/libslic3r/PrintConfig.cpp:1702 #: src/libslic3r/PrintConfig.cpp:1710 src/libslic3r/PrintConfig.cpp:1718 #: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:2047 #: src/libslic3r/PrintConfig.cpp:2118 src/libslic3r/PrintConfig.cpp:2152 #: src/libslic3r/PrintConfig.cpp:2281 src/libslic3r/PrintConfig.cpp:2360 #: src/libslic3r/PrintConfig.cpp:2367 src/libslic3r/PrintConfig.cpp:2374 #: src/libslic3r/PrintConfig.cpp:2404 src/libslic3r/PrintConfig.cpp:2414 #: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2584 #: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2757 #: src/libslic3r/PrintConfig.cpp:2766 src/libslic3r/PrintConfig.cpp:2775 #: src/libslic3r/PrintConfig.cpp:2785 src/libslic3r/PrintConfig.cpp:2850 #: src/libslic3r/PrintConfig.cpp:2860 src/libslic3r/PrintConfig.cpp:2872 #: src/libslic3r/PrintConfig.cpp:2892 src/libslic3r/PrintConfig.cpp:2902 #: src/libslic3r/PrintConfig.cpp:2912 src/libslic3r/PrintConfig.cpp:2930 #: src/libslic3r/PrintConfig.cpp:2945 src/libslic3r/PrintConfig.cpp:2959 #: src/libslic3r/PrintConfig.cpp:2970 src/libslic3r/PrintConfig.cpp:2983 #: src/libslic3r/PrintConfig.cpp:3028 src/libslic3r/PrintConfig.cpp:3038 #: src/libslic3r/PrintConfig.cpp:3047 src/libslic3r/PrintConfig.cpp:3057 #: src/libslic3r/PrintConfig.cpp:3073 src/libslic3r/PrintConfig.cpp:3097 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:131 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:141 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:142 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:309 #: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:358 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:145 msgid "Invalid" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222 #: src/slic3r/GUI/GUI_ObjectList.cpp:2215 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:243 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1981 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:315 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413 #: src/slic3r/GUI/Tab.cpp:3449 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:395 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:563 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619 #: src/slic3r/GUI/BedShapeDialog.cpp:642 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:581 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:589 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:593 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:608 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:631 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1305 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:47 msgid "" "Zero layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:48 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1376 #: src/libslic3r/PrintConfig.cpp:71 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:59 msgid "" "Zero first layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:938 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:80 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:88 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:89 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:114 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:118 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:119 #: src/slic3r/GUI/ConfigManipulation.cpp:139 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:135 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:138 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:158 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:161 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:162 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:207 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:209 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:210 #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93 #: src/slic3r/GUI/GUI_ObjectList.cpp:652 src/slic3r/GUI/Plater.cpp:388 #: src/slic3r/GUI/Tab.cpp:1420 src/slic3r/GUI/Tab.cpp:1422 #: src/libslic3r/PrintConfig.cpp:244 src/libslic3r/PrintConfig.cpp:457 #: src/libslic3r/PrintConfig.cpp:479 src/libslic3r/PrintConfig.cpp:819 #: src/libslic3r/PrintConfig.cpp:833 src/libslic3r/PrintConfig.cpp:870 #: src/libslic3r/PrintConfig.cpp:1034 src/libslic3r/PrintConfig.cpp:1044 #: src/libslic3r/PrintConfig.cpp:1062 src/libslic3r/PrintConfig.cpp:1081 #: src/libslic3r/PrintConfig.cpp:1100 src/libslic3r/PrintConfig.cpp:1834 #: src/libslic3r/PrintConfig.cpp:1851 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:322 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:324 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:335 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:337 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 src/libslic3r/PrintConfig.cpp:139 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 #: src/slic3r/GUI/GUI_Preview.cpp:294 src/libslic3r/ExtrusionEntity.cpp:309 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54 src/libslic3r/Preset.cpp:1257 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 src/libslic3r/Preset.cpp:1259 msgid "SLA print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/slic3r/GUI/Plater.cpp:688 #: src/libslic3r/Preset.cpp:1260 msgid "SLA material" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:61 src/libslic3r/Preset.cpp:1261 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 src/slic3r/GUI/Tab.cpp:1293 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:83 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:86 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:112 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:240 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:244 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:308 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:308 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:309 src/slic3r/GUI/ConfigWizard.cpp:599 #: src/slic3r/GUI/Tab.cpp:3530 src/slic3r/GUI/UnsavedChangesDialog.cpp:921 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:310 src/slic3r/GUI/ConfigWizard.cpp:600 #: src/slic3r/GUI/Plater.cpp:360 src/slic3r/GUI/Plater.cpp:500 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:446 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:448 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:450 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:452 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:457 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:500 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:588 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:590 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:591 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:663 src/slic3r/GUI/ConfigWizard.cpp:813 #: src/slic3r/GUI/ConfigWizard.cpp:874 src/slic3r/GUI/ConfigWizard.cpp:1011 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:692 msgid "" "Filaments marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:695 msgid "All installed printers are compatible with the selected filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:715 msgid "" "Only the following installed printers are compatible with the selected " "filament:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1101 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1101 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1103 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1105 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1130 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1130 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1138 src/slic3r/GUI/Preferences.cpp:81 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1142 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1148 src/slic3r/GUI/Preferences.cpp:97 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1152 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1155 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1160 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1167 src/slic3r/GUI/GUI_ObjectList.cpp:1793 #: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3045 #: src/slic3r/GUI/Plater.cpp:3878 src/slic3r/GUI/Plater.cpp:3907 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1170 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1174 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1182 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1184 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1189 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1190 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1191 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1197 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1198 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1232 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1236 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1267 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1267 src/slic3r/GUI/Tab.cpp:2145 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1271 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1305 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1308 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1328 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1328 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1342 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1345 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1355 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1356 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1359 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1393 msgid "Nozzle and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1393 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1409 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1410 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1413 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1414 src/slic3r/GUI/ConfigWizard.cpp:1428 #: src/libslic3r/PrintConfig.cpp:187 src/libslic3r/PrintConfig.cpp:919 #: src/libslic3r/PrintConfig.cpp:963 src/libslic3r/PrintConfig.cpp:2200 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1423 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1424 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1427 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1882 src/slic3r/GUI/ConfigWizard.cpp:2534 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1882 src/slic3r/GUI/ConfigWizard.cpp:2536 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1936 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1941 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2247 src/slic3r/GUI/DoubleSlider.cpp:2133 #: src/slic3r/GUI/DoubleSlider.cpp:2153 src/slic3r/GUI/GUI.cpp:244 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2267 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2271 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2285 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2289 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2497 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2500 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2501 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2502 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2503 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:644 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2516 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2519 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2534 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2534 src/slic3r/GUI/ConfigWizard.cpp:2536 #: src/slic3r/GUI/GUI_ObjectList.cpp:4016 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2536 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2634 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2635 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2637 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2638 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:106 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1075 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1077 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1082 src/slic3r/GUI/DoubleSlider.cpp:1863 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1086 #, possible-c-format msgid "Jump to height %s or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1088 src/slic3r/GUI/DoubleSlider.cpp:1732 #: src/slic3r/GUI/DoubleSlider.cpp:1863 src/slic3r/GUI/DoubleSlider.cpp:1867 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1094 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1104 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1118 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1120 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1122 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1123 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1125 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1126 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1132 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1141 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1142 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1144 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1146 msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1148 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1155 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1157 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1160 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1163 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1166 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1171 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1173 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1174 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1274 src/slic3r/GUI/DoubleSlider.cpp:1308 #: src/slic3r/GUI/GLCanvas3D.cpp:980 src/slic3r/GUI/GUI_ObjectList.cpp:1832 #: src/slic3r/GUI/Tab.cpp:2502 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1275 src/slic3r/GUI/GUI_ObjectList.cpp:1833 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1284 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1284 src/slic3r/GUI/GUI_ObjectList.cpp:1800 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1285 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1287 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1309 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1317 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1318 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1676 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1686 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1690 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1693 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1711 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1712 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1713 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1719 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1720 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1721 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1722 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1739 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1825 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1826 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1841 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1842 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1862 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1862 src/slic3r/GUI/DoubleSlider.cpp:1866 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2127 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2128 src/slic3r/GUI/DoubleSlider.cpp:2143 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2130 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2131 src/slic3r/GUI/DoubleSlider.cpp:2151 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2144 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2147 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2149 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2150 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:496 #: src/slic3r/GUI/GUI_ObjectList.cpp:508 src/slic3r/GUI/GUI_ObjectList.cpp:1015 #: src/slic3r/GUI/GUI_ObjectList.cpp:4454 #: src/slic3r/GUI/GUI_ObjectList.cpp:4464 #: src/slic3r/GUI/GUI_ObjectList.cpp:4499 #: src/slic3r/GUI/ObjectDataViewModel.cpp:209 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266 #: src/slic3r/GUI/ObjectDataViewModel.cpp:291 #: src/slic3r/GUI/ObjectDataViewModel.cpp:499 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52 #: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:1047 #: src/libslic3r/PrintConfig.cpp:1624 src/libslic3r/PrintConfig.cpp:1789 #: src/libslic3r/PrintConfig.cpp:1856 src/libslic3r/PrintConfig.cpp:2063 #: src/libslic3r/PrintConfig.cpp:2109 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:184 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:187 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:198 src/slic3r/GUI/OptionsGroup.cpp:761 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:874 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:220 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:240 src/slic3r/GUI/Field.cpp:271 #: src/slic3r/GUI/Field.cpp:1412 src/slic3r/GUI/GUI_ObjectLayers.cpp:413 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:249 src/slic3r/GUI/Field.cpp:1424 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:285 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:288 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:805 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:289 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 #: src/slic3r/GUI/Mouse3DController.cpp:552 #: src/slic3r/GUI/PrintHostDialogs.cpp:187 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:902 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:906 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:221 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:965 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1352 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1426 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2107 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2107 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2219 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2225 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2233 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2233 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2261 src/slic3r/GUI/GCodeViewer.cpp:2269 #: src/slic3r/GUI/GUI_Preview.cpp:270 src/slic3r/GUI/GUI_Preview.cpp:788 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2261 src/slic3r/GUI/GCodeViewer.cpp:2269 #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2269 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2272 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2273 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2274 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2275 msgid "Fan Speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2276 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2277 src/slic3r/GUI/GUI_Preview.cpp:276 #: src/slic3r/GUI/GUI_Preview.cpp:447 src/slic3r/GUI/GUI_Preview.cpp:694 #: src/slic3r/GUI/GUI_Preview.cpp:787 src/slic3r/GUI/GUI_Preview.cpp:1266 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2278 src/slic3r/GUI/GUI_Preview.cpp:277 #: src/slic3r/GUI/GUI_Preview.cpp:785 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2314 src/slic3r/GUI/GCodeViewer.cpp:2349 #: src/slic3r/GUI/GCodeViewer.cpp:2354 src/slic3r/GUI/GUI_ObjectList.cpp:296 #: src/slic3r/GUI/wxExtensions.cpp:515 src/libslic3r/PrintConfig.cpp:530 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2325 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2349 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2444 src/slic3r/GUI/GCodeViewer.cpp:2490 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2463 src/slic3r/GUI/GCodeViewer.cpp:2488 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2489 src/slic3r/GUI/GCodeViewer.cpp:2506 #: src/slic3r/GUI/Plater.cpp:1201 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2494 src/slic3r/GUI/GCodeViewer.cpp:2497 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2494 src/slic3r/GUI/GCodeViewer.cpp:2497 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2497 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2532 src/slic3r/GUI/GUI_Preview.cpp:330 #: src/slic3r/GUI/GUI_Preview.cpp:1468 src/libslic3r/PrintConfig.cpp:2286 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2535 msgid "Movement" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2536 msgid "Extrusion" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2537 src/slic3r/GUI/Tab.cpp:1680 #: src/slic3r/GUI/Tab.cpp:2552 msgid "Retraction" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2568 src/slic3r/GUI/GUI_Preview.cpp:315 #: src/slic3r/GUI/GUI_Preview.cpp:328 msgid "Options" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2571 src/slic3r/GUI/GUI_Preview.cpp:331 #: src/slic3r/GUI/GUI_Preview.cpp:1469 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2572 src/slic3r/GUI/GUI_Preview.cpp:332 #: src/slic3r/GUI/GUI_Preview.cpp:1470 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2573 src/slic3r/GUI/GUI_Preview.cpp:1471 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2574 src/slic3r/GUI/GUI_Preview.cpp:1472 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2575 src/slic3r/GUI/GUI_Preview.cpp:1473 msgid "Print pauses" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2576 src/slic3r/GUI/GUI_Preview.cpp:1474 msgid "Custom G-codes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2587 src/slic3r/GUI/GCodeViewer.cpp:2611 #: src/slic3r/GUI/Plater.cpp:689 src/libslic3r/PrintConfig.cpp:113 msgid "Printer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2589 src/slic3r/GUI/GCodeViewer.cpp:2616 #: src/slic3r/GUI/Plater.cpp:685 msgid "Print settings" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2592 src/slic3r/GUI/GCodeViewer.cpp:2622 #: src/slic3r/GUI/Plater.cpp:686 src/slic3r/GUI/Tab.cpp:1780 #: src/slic3r/GUI/Tab.cpp:1781 msgid "Filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2645 src/slic3r/GUI/GCodeViewer.cpp:2650 #: src/slic3r/GUI/Plater.cpp:241 src/slic3r/GUI/Plater.cpp:1127 #: src/slic3r/GUI/Plater.cpp:1177 src/slic3r/GUI/Plater.cpp:1198 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2645 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2650 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2677 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2681 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:228 src/slic3r/GUI/GLCanvas3D.cpp:4961 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:230 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:232 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:234 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:236 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:238 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:240 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:242 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:244 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:246 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:248 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:251 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:257 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:260 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:271 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:277 src/libslic3r/PrintConfig.cpp:554 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:287 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:296 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:562 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:630 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:631 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:632 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:633 msgid "Some objects are not visible." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:635 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:907 src/slic3r/GUI/GLCanvas3D.cpp:936 msgid "Default print color" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:937 src/slic3r/GUI/GLCanvas3D.cpp:946 #: src/slic3r/GUI/GLCanvas3D.cpp:985 msgid "Pause print or custom G-code" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:958 #, possible-c-format msgid "up to %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:962 #, possible-c-format msgid "above %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:966 #, possible-c-format msgid "%.2f - %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:998 #, possible-c-format msgid "Color change for Extruder %d at %.2f mm" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1309 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1776 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1784 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1792 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2224 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3187 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3271 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3798 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4285 src/slic3r/GUI/GLCanvas3D.cpp:4922 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4286 src/slic3r/GUI/GLCanvas3D.cpp:4922 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4287 src/slic3r/GUI/GLCanvas3D.cpp:4923 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4287 src/slic3r/GUI/GLCanvas3D.cpp:4923 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4288 src/slic3r/GUI/GLCanvas3D.cpp:4924 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4344 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4344 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4365 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4365 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:4385 src/slic3r/GUI/GLCanvas3D.cpp:4940 #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 src/slic3r/GUI/Search.cpp:426 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4399 src/slic3r/GUI/GLCanvas3D.cpp:4407 #: src/slic3r/GUI/Search.cpp:433 msgid "Enter a search term" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4816 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4824 src/slic3r/GUI/GUI_ObjectList.cpp:1846 #: src/slic3r/GUI/Plater.cpp:3875 src/slic3r/GUI/Plater.cpp:3897 #: src/slic3r/GUI/Tab.cpp:3449 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4833 src/slic3r/GUI/KBShortcutsDialog.cpp:124 #: src/slic3r/GUI/Plater.cpp:4807 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4842 src/slic3r/GUI/KBShortcutsDialog.cpp:151 #: src/slic3r/GUI/Plater.cpp:1558 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4842 src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4854 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4863 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4875 src/slic3r/GUI/Plater.cpp:3734 #: src/slic3r/GUI/Plater.cpp:3746 src/slic3r/GUI/Plater.cpp:3884 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4886 src/slic3r/GUI/Plater.cpp:3886 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4899 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4909 src/slic3r/GUI/GUI_ObjectList.cpp:1618 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5011 src/slic3r/GUI/KBShortcutsDialog.cpp:125 #: src/slic3r/GUI/MainFrame.cpp:1199 msgid "Undo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5011 src/slic3r/GUI/GLCanvas3D.cpp:5050 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5034 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5050 src/slic3r/GUI/KBShortcutsDialog.cpp:126 #: src/slic3r/GUI/MainFrame.cpp:1202 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:5072 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:7175 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:7194 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:3593 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33 msgid "Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27 msgid "Brush size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28 msgid "Brush shape" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:373 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:368 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:378 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:129 msgid "Autoset by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:118 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:159 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:173 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:203 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233 msgid "Autoset custom supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235 msgid "Threshold:" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245 msgid "Block" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44 #: src/libslic3r/PrintConfig.cpp:3089 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 #: src/libslic3r/PrintConfig.cpp:3642 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/libslic3r/PrintConfig.cpp:3657 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:381 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:383 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46 msgid "Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 #: src/libslic3r/PrintConfig.cpp:2919 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897 msgid "SLA gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924 msgid "SLA gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 src/slic3r/GUI/GUI.cpp:256 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:557 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:581 #: src/slic3r/GUI/WipeTowerDialog.cpp:45 src/slic3r/GUI/WipeTowerDialog.cpp:366 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:39 msgid "Entering Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40 msgid "Entering Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:47 msgid "Leaving Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48 msgid "Leaving Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:371 msgid "Add supports" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:243 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:245 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:246 msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:386 msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " "(according to XDG Base Directory Specification) to \n" "%2%.\n" "\n" "This directory did not exist yet (maybe you run the new version for the " "first time).\n" "However, an old %1% configuration directory was detected in \n" "%3%.\n" "\n" "Consider moving the contents of the old directory to the new location in " "order to access your profiles, etc.\n" "Note that if you decide to downgrade %1% in future, it will use the old " "location again.\n" "\n" "What do you want to do now?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:394 #, possible-c-format msgid "%s - BREAKING CHANGE" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:396 msgid "Quit, I will move my data now" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:396 msgid "Start the application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:585 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:588 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:723 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:730 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:788 #, possible-c-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:790 src/slic3r/GUI/UnsavedChangesDialog.cpp:653 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:829 msgid "Loading configuration..." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:895 msgid "Preparing settings tabs..." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1148 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1152 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" "Settings will be available in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1154 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1157 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1172 src/slic3r/GUI/GUI_App.cpp:1185 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1190 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1195 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1278 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1290 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1303 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1315 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1365 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1365 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1495 msgid "modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1544 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1550 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1550 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1551 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1551 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1552 msgid "Check for updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1552 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1557 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1563 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1574 src/slic3r/GUI/wxExtensions.cpp:673 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1574 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1576 src/slic3r/GUI/wxExtensions.cpp:675 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1576 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1577 src/slic3r/GUI/wxExtensions.cpp:676 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1577 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1582 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1582 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1587 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1592 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1592 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1610 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1610 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1675 src/slic3r/GUI/GUI_App.cpp:1684 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1678 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1680 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1715 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1746 msgid "The preset(s) modifications are successfully saved" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1946 src/slic3r/GUI/Tab.cpp:3207 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1947 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1948 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 #: src/slic3r/GUI/Plater.cpp:2272 src/slic3r/GUI/Tab.cpp:3209 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1965 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:85 src/slic3r/GUI/GUI_Init.cpp:88 msgid "PrusaSlicer GUI initialization failed" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:88 msgid "Fatal error, exception catched: %1%" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:161 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:165 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92 #: src/slic3r/GUI/GUI_ObjectList.cpp:651 src/libslic3r/PrintConfig.cpp:72 #: src/libslic3r/PrintConfig.cpp:216 src/libslic3r/PrintConfig.cpp:225 #: src/libslic3r/PrintConfig.cpp:449 src/libslic3r/PrintConfig.cpp:513 #: src/libslic3r/PrintConfig.cpp:521 src/libslic3r/PrintConfig.cpp:939 #: src/libslic3r/PrintConfig.cpp:1128 src/libslic3r/PrintConfig.cpp:1493 #: src/libslic3r/PrintConfig.cpp:1560 src/libslic3r/PrintConfig.cpp:1741 #: src/libslic3r/PrintConfig.cpp:2208 src/libslic3r/PrintConfig.cpp:2267 #: src/libslic3r/PrintConfig.cpp:2276 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95 #: src/slic3r/GUI/GUI_ObjectList.cpp:654 src/slic3r/GUI/GUI_Preview.cpp:306 #: src/slic3r/GUI/Tab.cpp:1458 src/slic3r/GUI/Tab.cpp:1460 #: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:352 #: src/libslic3r/PrintConfig.cpp:411 src/libslic3r/PrintConfig.cpp:1621 #: src/libslic3r/PrintConfig.cpp:1999 src/libslic3r/PrintConfig.cpp:2005 #: src/libslic3r/PrintConfig.cpp:2013 src/libslic3r/PrintConfig.cpp:2025 #: src/libslic3r/PrintConfig.cpp:2035 src/libslic3r/PrintConfig.cpp:2043 #: src/libslic3r/PrintConfig.cpp:2058 src/libslic3r/PrintConfig.cpp:2079 #: src/libslic3r/PrintConfig.cpp:2091 src/libslic3r/PrintConfig.cpp:2107 #: src/libslic3r/PrintConfig.cpp:2116 src/libslic3r/PrintConfig.cpp:2125 #: src/libslic3r/PrintConfig.cpp:2136 src/libslic3r/PrintConfig.cpp:2150 #: src/libslic3r/PrintConfig.cpp:2158 src/libslic3r/PrintConfig.cpp:2159 #: src/libslic3r/PrintConfig.cpp:2168 src/libslic3r/PrintConfig.cpp:2176 #: src/libslic3r/PrintConfig.cpp:2190 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99 #: src/slic3r/GUI/GUI_ObjectList.cpp:658 src/libslic3r/PrintConfig.cpp:2386 #: src/libslic3r/PrintConfig.cpp:2394 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:45 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:51 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:52 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:53 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:54 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:653 #: src/slic3r/GUI/GUI_Preview.cpp:302 src/slic3r/GUI/Tab.cpp:1428 #: src/libslic3r/ExtrusionEntity.cpp:316 src/libslic3r/ExtrusionEntity.cpp:344 #: src/libslic3r/PrintConfig.cpp:1135 src/libslic3r/PrintConfig.cpp:1141 #: src/libslic3r/PrintConfig.cpp:1155 src/libslic3r/PrintConfig.cpp:1165 #: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:1175 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:655 #: src/slic3r/GUI/GUI_Preview.cpp:273 src/slic3r/GUI/Tab.cpp:1484 #: src/libslic3r/PrintConfig.cpp:276 src/libslic3r/PrintConfig.cpp:501 #: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1101 #: src/libslic3r/PrintConfig.cpp:1174 src/libslic3r/PrintConfig.cpp:1550 #: src/libslic3r/PrintConfig.cpp:1822 src/libslic3r/PrintConfig.cpp:1874 #: src/libslic3r/PrintConfig.cpp:2252 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:656 #: src/slic3r/GUI/Tab.cpp:1520 src/slic3r/GUI/Tab.cpp:2085 #: src/libslic3r/PrintConfig.cpp:531 src/libslic3r/PrintConfig.cpp:1055 #: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1843 #: src/libslic3r/PrintConfig.cpp:2071 src/libslic3r/PrintConfig.cpp:2098 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:657 #: src/libslic3r/PrintConfig.cpp:490 src/libslic3r/PrintConfig.cpp:598 #: src/libslic3r/PrintConfig.cpp:926 src/libslic3r/PrintConfig.cpp:1063 #: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:1863 #: src/libslic3r/PrintConfig.cpp:2080 src/libslic3r/PrintConfig.cpp:2240 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:661 #: src/slic3r/GUI/Tab.cpp:1416 src/slic3r/GUI/Tab.cpp:1438 #: src/slic3r/GUI/Tab.cpp:1541 src/slic3r/GUI/Tab.cpp:1544 #: src/slic3r/GUI/Tab.cpp:1828 src/slic3r/GUI/Tab.cpp:2165 #: src/slic3r/GUI/Tab.cpp:4079 src/libslic3r/PrintConfig.cpp:90 #: src/libslic3r/PrintConfig.cpp:128 src/libslic3r/PrintConfig.cpp:264 #: src/libslic3r/PrintConfig.cpp:1090 src/libslic3r/PrintConfig.cpp:2410 #: src/libslic3r/PrintConfig.cpp:2582 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:663 #: src/slic3r/GUI/Plater.cpp:356 src/slic3r/GUI/Tab.cpp:4013 #: src/slic3r/GUI/Tab.cpp:4014 src/libslic3r/PrintConfig.cpp:2748 #: src/libslic3r/PrintConfig.cpp:2755 src/libslic3r/PrintConfig.cpp:2764 #: src/libslic3r/PrintConfig.cpp:2773 src/libslic3r/PrintConfig.cpp:2783 #: src/libslic3r/PrintConfig.cpp:2793 src/libslic3r/PrintConfig.cpp:2830 #: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2848 #: src/libslic3r/PrintConfig.cpp:2858 src/libslic3r/PrintConfig.cpp:2867 #: src/libslic3r/PrintConfig.cpp:2880 src/libslic3r/PrintConfig.cpp:2890 #: src/libslic3r/PrintConfig.cpp:2899 src/libslic3r/PrintConfig.cpp:2909 #: src/libslic3r/PrintConfig.cpp:2920 src/libslic3r/PrintConfig.cpp:2928 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:664 #: src/slic3r/GUI/Plater.cpp:496 src/slic3r/GUI/Tab.cpp:4054 #: src/slic3r/GUI/Tab.cpp:4055 src/slic3r/GUI/Tab.cpp:4126 #: src/libslic3r/PrintConfig.cpp:2936 src/libslic3r/PrintConfig.cpp:2943 #: src/libslic3r/PrintConfig.cpp:2957 src/libslic3r/PrintConfig.cpp:2968 #: src/libslic3r/PrintConfig.cpp:2978 src/libslic3r/PrintConfig.cpp:3000 #: src/libslic3r/PrintConfig.cpp:3011 src/libslic3r/PrintConfig.cpp:3018 #: src/libslic3r/PrintConfig.cpp:3025 src/libslic3r/PrintConfig.cpp:3036 #: src/libslic3r/PrintConfig.cpp:3045 src/libslic3r/PrintConfig.cpp:3054 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4072 #: src/slic3r/GUI/Tab.cpp:4073 src/libslic3r/SLA/Hollowing.cpp:45 #: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66 #: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3064 #: src/libslic3r/PrintConfig.cpp:3071 src/libslic3r/PrintConfig.cpp:3081 #: src/libslic3r/PrintConfig.cpp:3090 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:284 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:300 src/slic3r/GUI/GUI_ObjectList.cpp:441 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:386 #, possible-c-format msgid "Auto-repaired (%d errors):" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:393 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:394 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:395 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:396 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:397 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:398 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:406 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:443 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:445 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:449 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:451 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:574 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:589 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:589 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1215 #: src/slic3r/GUI/GUI_ObjectList.cpp:4244 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1230 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1230 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1306 #: src/slic3r/GUI/GUI_ObjectList.cpp:1661 #: src/slic3r/GUI/GUI_ObjectList.cpp:1667 #: src/slic3r/GUI/GUI_ObjectList.cpp:2008 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1396 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1445 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1446 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1447 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1517 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1518 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1519 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1558 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 #: src/slic3r/GUI/GUI_ObjectList.cpp:1595 #: src/slic3r/GUI/GUI_ObjectList.cpp:1599 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1631 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1640 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1718 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1728 #: src/slic3r/GUI/GUI_ObjectList.cpp:1740 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1740 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1750 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1765 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1776 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1786 src/slic3r/GUI/Plater.cpp:3910 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1793 #: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3878 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1800 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1832 src/libslic3r/PrintConfig.cpp:376 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1852 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1852 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1858 src/slic3r/GUI/Plater.cpp:4919 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1861 src/slic3r/GUI/Plater.cpp:4919 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1868 #: src/slic3r/GUI/GUI_ObjectList.cpp:1876 #: src/slic3r/GUI/GUI_ObjectList.cpp:2569 src/libslic3r/PrintConfig.cpp:3633 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1868 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1876 msgid "Merge objects to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1953 #: src/slic3r/GUI/GUI_ObjectList.cpp:2210 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2038 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2077 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2152 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2181 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2307 #: src/slic3r/GUI/GUI_ObjectList.cpp:2408 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2319 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2341 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2357 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2389 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2393 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2412 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2436 src/slic3r/GUI/Plater.cpp:2787 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2440 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2576 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2660 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2692 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2846 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2858 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2871 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2875 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2880 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2886 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2892 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2899 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2899 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3083 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3221 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3297 #: src/slic3r/GUI/GUI_ObjectList.cpp:3325 #: src/slic3r/GUI/GUI_ObjectList.cpp:3345 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3391 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3395 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3400 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3459 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3754 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3762 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3880 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3881 #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3881 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3883 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3884 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3885 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3888 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3893 #: src/slic3r/GUI/GUI_ObjectList.cpp:3968 src/slic3r/GUI/Plater.cpp:142 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4009 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4016 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4021 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4266 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4266 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4282 #: src/slic3r/GUI/GUI_ObjectList.cpp:4409 #: src/slic3r/GUI/SavePresetDialog.cpp:101 #: src/slic3r/GUI/SavePresetDialog.cpp:109 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4283 #: src/slic3r/GUI/GUI_ObjectList.cpp:4410 #: src/slic3r/GUI/SavePresetDialog.cpp:102 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4458 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4459 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4484 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1531 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1531 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:621 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:505 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506 #: src/slic3r/GUI/Mouse3DController.cpp:487 #: src/slic3r/GUI/Mouse3DController.cpp:508 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 msgid "in" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:561 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:625 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:828 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:893 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:925 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:928 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:62 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:98 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:104 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:157 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:260 src/slic3r/GUI/GUI_Preview.cpp:266 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/PrintConfig.cpp:543 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:272 src/libslic3r/PrintConfig.cpp:2372 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:274 src/slic3r/GUI/Tab.cpp:1814 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:275 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:281 src/slic3r/GUI/GUI_Preview.cpp:283 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:288 src/slic3r/GUI/GUI_Preview.cpp:290 #: src/slic3r/GUI/GUI_Preview.cpp:311 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:296 src/libslic3r/ExtrusionEntity.cpp:310 #: src/libslic3r/ExtrusionEntity.cpp:332 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:297 src/libslic3r/ExtrusionEntity.cpp:311 #: src/libslic3r/ExtrusionEntity.cpp:334 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:298 src/libslic3r/ExtrusionEntity.cpp:312 #: src/libslic3r/ExtrusionEntity.cpp:336 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:299 src/libslic3r/ExtrusionEntity.cpp:313 #: src/libslic3r/ExtrusionEntity.cpp:338 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:300 src/libslic3r/ExtrusionEntity.cpp:314 #: src/libslic3r/ExtrusionEntity.cpp:340 src/libslic3r/PrintConfig.cpp:1862 #: src/libslic3r/PrintConfig.cpp:1873 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:301 src/libslic3r/ExtrusionEntity.cpp:315 #: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2239 #: src/libslic3r/PrintConfig.cpp:2251 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:303 src/libslic3r/ExtrusionEntity.cpp:317 #: src/libslic3r/ExtrusionEntity.cpp:346 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:304 src/libslic3r/ExtrusionEntity.cpp:318 #: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:969 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:305 src/slic3r/GUI/Tab.cpp:1448 #: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/ExtrusionEntity.cpp:350 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:307 src/libslic3r/ExtrusionEntity.cpp:321 #: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:2124 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:308 src/slic3r/GUI/Tab.cpp:1531 #: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/ExtrusionEntity.cpp:356 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:333 src/slic3r/GUI/GUI_Preview.cpp:1475 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:334 msgid "Legend" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1476 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:1477 msgid "Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:804 src/slic3r/GUI/Search.cpp:464 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:805 src/slic3r/GUI/Search.cpp:458 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:460 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:149 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:176 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/Job.cpp:75 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35 msgid "Choose SLA archive:" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39 msgid "Import file: " msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46 msgid "Import model and profile" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47 msgid "Import profile only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48 msgid "Import model only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56 msgid "Quality: " msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59 msgid "Accurate" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60 msgid "Balanced" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61 msgid "Quick" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2270 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2271 #: src/slic3r/GUI/Tab.cpp:3208 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:37 #: src/slic3r/GUI/KBShortcutsDialog.cpp:39 src/slic3r/GUI/MainFrame.cpp:953 #: src/slic3r/GUI/MainFrame.cpp:1344 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:105 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:107 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Plater.cpp:762 #: src/slic3r/GUI/Plater.cpp:5774 src/libslic3r/PrintConfig.cpp:3538 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Plater.cpp:5775 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:134 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 #: src/slic3r/GUI/PrintHostDialogs.cpp:163 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Preferences.cpp:12 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 #: src/slic3r/GUI/KBShortcutsDialog.cpp:212 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:175 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:177 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:178 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:179 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:180 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:182 #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:194 src/slic3r/GUI/MainFrame.cpp:351 #: src/slic3r/GUI/MainFrame.cpp:363 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 msgid "Gizmo move: Press to snap by 1mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 msgid "Gizmo scale: Press to snap by 5%" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:200 msgid "Gizmo scale: Scale selection to fit print volume" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:201 msgid "Gizmo scale: Press to activate one direction scaling" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:202 msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:203 msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:206 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:212 #: src/slic3r/GUI/KBShortcutsDialog.cpp:214 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:216 msgid "Show/Hide Legend & Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 src/slic3r/GUI/Plater.cpp:4078 #: src/slic3r/GUI/Tab.cpp:2572 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:225 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:228 #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 #: src/slic3r/GUI/KBShortcutsDialog.cpp:238 #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:232 msgid "Layers Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 msgid "Move current slider thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "Move current slider thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 msgid "Sequential Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:270 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:1274 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:77 #: src/slic3r/GUI/MainFrame.cpp:1274 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:79 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:1153 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:1410 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:79 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:166 msgid "" " - Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/" "releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:550 src/slic3r/GUI/MainFrame.cpp:552 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:921 src/slic3r/GUI/MainFrame.cpp:1320 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:921 src/slic3r/GUI/MainFrame.cpp:1320 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:923 src/slic3r/GUI/MainFrame.cpp:1322 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:923 src/slic3r/GUI/MainFrame.cpp:1322 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:929 src/slic3r/GUI/MainFrame.cpp:1328 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:930 src/slic3r/GUI/MainFrame.cpp:1329 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:936 src/slic3r/GUI/MainFrame.cpp:1335 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:936 src/slic3r/GUI/MainFrame.cpp:1335 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:938 src/slic3r/GUI/MainFrame.cpp:1337 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:938 src/slic3r/GUI/MainFrame.cpp:1337 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:940 src/slic3r/GUI/MainFrame.cpp:1339 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:940 src/slic3r/GUI/MainFrame.cpp:1339 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:945 src/slic3r/GUI/MainFrame.cpp:949 #: src/slic3r/GUI/MainFrame.cpp:1341 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:945 src/slic3r/GUI/MainFrame.cpp:949 #: src/slic3r/GUI/MainFrame.cpp:1341 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:953 src/slic3r/GUI/MainFrame.cpp:1344 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1287 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1287 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:971 src/slic3r/GUI/MainFrame.cpp:1291 #: src/libslic3r/PrintConfig.cpp:2266 src/libslic3r/PrintConfig.cpp:2275 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:971 src/slic3r/GUI/MainFrame.cpp:1291 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:974 src/slic3r/GUI/MainFrame.cpp:1294 #: src/libslic3r/PrintConfig.cpp:215 src/libslic3r/PrintConfig.cpp:224 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:974 src/slic3r/GUI/MainFrame.cpp:1294 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:976 src/slic3r/GUI/MainFrame.cpp:1296 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:976 src/slic3r/GUI/MainFrame.cpp:1296 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:978 src/slic3r/GUI/MainFrame.cpp:1298 #: src/libslic3r/PrintConfig.cpp:1751 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:978 src/slic3r/GUI/MainFrame.cpp:1298 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:980 src/slic3r/GUI/MainFrame.cpp:1300 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:980 src/slic3r/GUI/MainFrame.cpp:1300 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:1302 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:1302 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:998 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:998 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1001 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1001 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1006 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1015 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1015 src/slic3r/GUI/MainFrame.cpp:1498 #: src/slic3r/GUI/PrintHostDialogs.cpp:259 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1040 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1040 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1044 src/slic3r/GUI/MainFrame.cpp:1046 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1044 src/slic3r/GUI/MainFrame.cpp:1046 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1054 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1054 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 msgid "Import STL (imperial units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1062 msgid "Import SL1 archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1062 msgid "Load an SL1 archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1067 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1067 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1070 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1070 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1074 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1074 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1077 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1080 src/slic3r/GUI/MainFrame.cpp:1460 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1080 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1084 src/slic3r/GUI/MainFrame.cpp:1461 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1084 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1088 msgid "Export G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1088 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1092 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1092 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1095 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1095 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1098 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1098 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1102 src/slic3r/GUI/MainFrame.cpp:1407 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1102 src/slic3r/GUI/MainFrame.cpp:1407 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1106 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1106 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1109 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1109 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1112 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1112 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1115 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1117 msgid "Ejec&t SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1117 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1125 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1125 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1131 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1131 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1145 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1145 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1149 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1149 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1153 msgid "&G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1156 src/slic3r/GUI/MainFrame.cpp:1414 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1156 src/slic3r/GUI/MainFrame.cpp:1414 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1183 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1184 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1186 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1187 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1190 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1191 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1193 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1194 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1198 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1201 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1206 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1207 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1209 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1210 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1214 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1215 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1219 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1220 msgid "Search in settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1228 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1228 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1233 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1233 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1236 src/slic3r/GUI/MainFrame.cpp:1463 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1236 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1240 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1240 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1246 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1246 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1249 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1249 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1270 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1270 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1306 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1306 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1309 msgid "&Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1309 src/slic3r/GUI/Plater.cpp:2160 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1359 src/slic3r/GUI/MainFrame.cpp:1369 #: src/slic3r/GUI/MainFrame.cpp:1429 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1360 src/slic3r/GUI/MainFrame.cpp:1370 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1361 src/slic3r/GUI/MainFrame.cpp:1371 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1362 src/slic3r/GUI/MainFrame.cpp:1372 #: src/slic3r/GUI/MainFrame.cpp:1430 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1365 src/slic3r/GUI/MainFrame.cpp:1375 #: src/slic3r/GUI/MainFrame.cpp:1435 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1403 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1403 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1410 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1460 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1461 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1463 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1486 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1497 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1503 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1503 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1504 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1539 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1539 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1539 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1551 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1560 src/slic3r/GUI/Plater.cpp:2938 #: src/slic3r/GUI/Plater.cpp:5275 src/slic3r/GUI/Tab.cpp:1561 #: src/slic3r/GUI/Tab.cpp:4080 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1562 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1585 msgid " was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1587 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1602 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1612 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1624 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1624 src/libslic3r/PrintConfig.cpp:3638 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1638 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1657 src/slic3r/GUI/MainFrame.cpp:1719 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1693 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1740 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:462 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:473 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:478 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:481 #: src/slic3r/GUI/Mouse3DController.cpp:502 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:493 #: src/slic3r/GUI/Mouse3DController.cpp:502 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:499 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:514 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:517 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:73 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:74 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:395 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:398 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:398 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:400 msgid "New version is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:400 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:387 #: src/slic3r/GUI/NotificationManager.cpp:397 msgid "More" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:690 #: src/slic3r/GUI/NotificationManager.cpp:961 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:734 msgid "Open Folder." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:772 msgid "Eject drive" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:880 #: src/slic3r/GUI/NotificationManager.cpp:896 #: src/slic3r/GUI/NotificationManager.cpp:907 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:885 #: src/slic3r/GUI/NotificationManager.cpp:900 #: src/slic3r/GUI/NotificationManager.cpp:915 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:964 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1007 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:58 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:62 #: src/slic3r/GUI/ObjectDataViewModel.cpp:225 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3927 #: src/slic3r/GUI/Tab.cpp:4009 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:259 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:262 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw_renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:267 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:275 #, possible-c-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:276 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:315 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:315 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:51 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:81 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:155 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:161 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:172 msgid "Descriptive name for the printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 src/slic3r/GUI/Tab.cpp:2037 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:260 msgid "Connection to printers connected via the print host failed." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:302 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:307 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:319 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:329 msgid "Refresh Printers" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:356 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:366 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:395 #: src/libslic3r/PrintConfig.cpp:120 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:396 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:397 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:543 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:547 msgid "You should to change a name of your printer device. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:555 msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:556 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:579 msgid "" "Following printer preset(s) is duplicated:%1%The above preset for printer " "\"%2%\" will be used just once." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:625 msgid "It's not possible to delete the last related preset for the printer." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:626 msgid "Infornation" msgstr "" #: src/slic3r/GUI/Plater.cpp:162 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:163 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:164 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:167 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:217 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:236 src/slic3r/GUI/Plater.cpp:1143 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1155 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:238 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:239 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:240 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:242 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:359 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:361 src/libslic3r/PrintConfig.cpp:2034 #: src/libslic3r/PrintConfig.cpp:2829 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:362 src/slic3r/GUI/Plater.cpp:485 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:363 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:395 src/slic3r/GUI/Tab.cpp:1455 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:397 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:405 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:499 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:501 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:502 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:687 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:748 msgid "Send to printer " msgstr "" #: src/slic3r/GUI/Plater.cpp:750 msgid "Export to SD card / Flash drive " msgstr "" #: src/slic3r/GUI/Plater.cpp:763 src/slic3r/GUI/Plater.cpp:2938 #: src/slic3r/GUI/Plater.cpp:5278 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:918 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1063 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1068 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1071 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:1081 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1102 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1105 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1105 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1143 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1145 src/slic3r/GUI/Plater.cpp:1162 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1145 src/slic3r/GUI/Plater.cpp:1162 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1155 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1160 src/libslic3r/PrintConfig.cpp:803 #: src/libslic3r/PrintConfig.cpp:2644 src/libslic3r/PrintConfig.cpp:2645 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1179 src/slic3r/GUI/Plater.cpp:1226 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1189 src/slic3r/GUI/Plater.cpp:1237 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1200 src/libslic3r/PrintConfig.cpp:625 msgid "Color" msgstr "" #: src/slic3r/GUI/Plater.cpp:1407 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:1408 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1438 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:1442 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:1564 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:1570 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:2048 #, possible-c-format msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2051 #, possible-c-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2072 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2159 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2232 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:2242 msgid "Loading file" msgstr "" #: src/slic3r/GUI/Plater.cpp:2325 #, possible-c-format msgid "" "Some object(s) in file %s looks like saved in inches.\n" "Should I consider them as a saved in inches and convert them?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2327 msgid "The object appears to be saved in inches" msgstr "" #: src/slic3r/GUI/Plater.cpp:2335 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2338 src/slic3r/GUI/Plater.cpp:2391 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2345 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2346 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2368 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2388 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2404 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:2506 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2507 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2569 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2576 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2582 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2588 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2689 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2700 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2779 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2790 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2922 src/slic3r/GUI/Plater.cpp:3605 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2932 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:2970 src/slic3r/GUI/PrintHostDialogs.cpp:260 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:2989 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3106 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3141 msgid "It is not allowed to change the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3141 msgid "Do you want to retry" msgstr "" #: src/slic3r/GUI/Plater.cpp:3159 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3250 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3255 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3274 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3295 msgid "Fix Throught NetFabb" msgstr "" #: src/slic3r/GUI/Plater.cpp:3563 msgid "There are active warnings concerning sliced models:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3574 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:3613 src/slic3r/GUI/PrintHostDialogs.cpp:261 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:3875 src/slic3r/GUI/Plater.cpp:3897 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3884 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3886 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3888 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:3888 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3907 msgid "Reload the selected object from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3910 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:3941 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3941 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3943 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3943 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3945 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3945 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:3948 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:3948 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3960 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3960 src/slic3r/GUI/Plater.cpp:3980 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3962 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3962 src/slic3r/GUI/Plater.cpp:3998 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3965 src/slic3r/GUI/Plater.cpp:3980 #: src/slic3r/GUI/Plater.cpp:3998 src/libslic3r/PrintConfig.cpp:3662 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:3965 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3987 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:3988 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:4070 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4446 msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" #: src/slic3r/GUI/Plater.cpp:4650 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:4678 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4682 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4752 msgid "The selected file" msgstr "" #: src/slic3r/GUI/Plater.cpp:4752 msgid "does not contain valid gcode." msgstr "" #: src/slic3r/GUI/Plater.cpp:4753 msgid "Error while loading .gcode file" msgstr "" #: src/slic3r/GUI/Plater.cpp:4807 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:4815 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4823 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4857 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:4888 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:4889 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4893 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:4954 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:5008 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5008 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5155 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5172 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5175 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5204 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5209 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5774 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:5775 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:5871 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:24 src/slic3r/GUI/Tab.cpp:2071 #: src/slic3r/GUI/Tab.cpp:2253 src/slic3r/GUI/Tab.cpp:2361 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:52 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:54 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:64 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:66 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:72 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:74 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:83 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:89 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:91 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:99 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:104 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:106 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:112 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:114 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:120 src/libslic3r/PrintConfig.cpp:3689 msgid "Single instance mode" msgstr "" #: src/slic3r/GUI/Preferences.cpp:123 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:125 msgid "" "If this is enabled, when starting PrusaSlicer and another instance of the " "same PrusaSlicer is already running, that instance will be reactivated " "instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:135 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:137 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:154 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:659 msgid "Ask for unsaved changes when closing application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:156 msgid "When closing the application, always ask for unsaved changes" msgstr "" #: src/slic3r/GUI/Preferences.cpp:161 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:660 msgid "Ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:163 msgid "Always ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:169 src/slic3r/GUI/Preferences.cpp:171 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:178 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:184 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:186 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:191 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:193 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:198 msgid "Reverse direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:200 msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:207 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:220 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:222 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:227 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:229 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:236 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:238 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer. If disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:262 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:268 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:270 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:306 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preferences.cpp:383 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:398 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:429 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:430 msgid "New layout, access via settings button in the top menu" msgstr "" #: src/slic3r/GUI/Preferences.cpp:431 msgid "Settings in non-modal window" msgstr "" #: src/slic3r/GUI/Preferences.cpp:440 msgid "Layout Options" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:188 #: src/slic3r/GUI/PresetComboBoxes.cpp:226 #: src/slic3r/GUI/PresetComboBoxes.cpp:752 #: src/slic3r/GUI/PresetComboBoxes.cpp:802 #: src/slic3r/GUI/PresetComboBoxes.cpp:916 #: src/slic3r/GUI/PresetComboBoxes.cpp:960 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:230 #: src/slic3r/GUI/PresetComboBoxes.cpp:806 #: src/slic3r/GUI/PresetComboBoxes.cpp:964 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:241 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:276 msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:278 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:615 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:671 #: src/slic3r/GUI/PresetComboBoxes.cpp:701 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:676 #: src/slic3r/GUI/PresetComboBoxes.cpp:706 src/slic3r/GUI/Tab.cpp:2960 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:690 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:694 src/slic3r/GUI/Tab.cpp:2960 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:697 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:817 #: src/slic3r/GUI/PresetComboBoxes.cpp:978 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:841 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:843 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:845 #: src/slic3r/GUI/PresetComboBoxes.cpp:1002 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:28 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:35 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:39 msgid "During the other layers, fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:41 msgid "Fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:47 msgid "will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:50 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:52 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:54 msgid "will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:155 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:164 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:173 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:183 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:202 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:212 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:223 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:224 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:228 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:246 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:262 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:269 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:273 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:302 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:315 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:318 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:321 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:334 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:337 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:340 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:34 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:34 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:36 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:44 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:57 msgid "Group" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:174 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:175 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:176 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:177 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:178 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:179 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:182 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:184 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:226 #: src/slic3r/GUI/PrintHostDialogs.cpp:257 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:258 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:262 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:300 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83 #: src/libslic3r/PrintConfig.cpp:687 src/libslic3r/PrintConfig.cpp:731 #: src/libslic3r/PrintConfig.cpp:746 src/libslic3r/PrintConfig.cpp:2542 #: src/libslic3r/PrintConfig.cpp:2551 src/libslic3r/PrintConfig.cpp:2661 #: src/libslic3r/PrintConfig.cpp:2669 src/libslic3r/PrintConfig.cpp:2677 #: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2692 #: src/libslic3r/PrintConfig.cpp:2700 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:644 #: src/libslic3r/PrintConfig.cpp:1367 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:57 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:110 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:116 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:122 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:127 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:134 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:136 msgid "" "Preset with name \"%1%\" already exists and is imcopatible with selected " "printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:137 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:142 msgid "The name cannot be empty." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:176 #: src/slic3r/GUI/SavePresetDialog.cpp:182 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:205 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:263 msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:296 msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:299 msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:300 msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:301 msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2391 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2385 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:191 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:232 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:264 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:283 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:301 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:320 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:421 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:447 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:1006 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/Selection.cpp:1533 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:1533 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:90 src/slic3r/GUI/SysInfoDialog.cpp:92 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:177 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:111 src/libslic3r/PrintConfig.cpp:306 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:112 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:117 src/libslic3r/PrintConfig.cpp:321 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:118 msgid "Select the print profiles this profile is compatible with." msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:213 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:214 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:218 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:222 msgid "Search in settings [%1%]" msgstr "" #: src/slic3r/GUI/Tab.cpp:1228 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1241 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1242 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1245 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1248 msgid "" "This action is not revertable.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1250 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1276 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1278 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1280 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1282 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1286 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1287 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1288 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1292 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1298 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1306 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1309 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1323 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1327 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1335 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1336 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1374 src/slic3r/GUI/Tab.cpp:4007 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1380 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1392 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1393 src/libslic3r/PrintConfig.cpp:1886 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1398 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1409 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1434 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1446 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1466 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1470 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1485 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1498 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1501 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1504 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1511 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1519 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1527 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1545 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1555 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1558 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1567 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1570 src/slic3r/GUI/Tab.cpp:4083 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1571 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1573 msgid "Extruder clearance (mm)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1578 src/slic3r/GUI/Tab.cpp:4084 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1585 src/libslic3r/PrintConfig.cpp:1572 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1591 src/slic3r/GUI/Tab.cpp:1592 #: src/slic3r/GUI/Tab.cpp:1900 src/slic3r/GUI/Tab.cpp:1901 #: src/slic3r/GUI/Tab.cpp:2234 src/slic3r/GUI/Tab.cpp:2235 #: src/slic3r/GUI/Tab.cpp:2310 src/slic3r/GUI/Tab.cpp:2311 #: src/slic3r/GUI/Tab.cpp:3950 src/slic3r/GUI/Tab.cpp:3951 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1598 src/slic3r/GUI/Tab.cpp:1908 #: src/slic3r/GUI/Tab.cpp:2241 src/slic3r/GUI/Tab.cpp:2317 #: src/slic3r/GUI/Tab.cpp:3958 src/slic3r/GUI/Tab.cpp:4089 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1599 src/slic3r/GUI/Tab.cpp:1909 #: src/slic3r/GUI/Tab.cpp:2242 src/slic3r/GUI/Tab.cpp:2318 #: src/slic3r/GUI/Tab.cpp:3959 src/slic3r/GUI/Tab.cpp:4090 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1679 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1789 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1790 msgid "Nozzle" msgstr "" #: src/slic3r/GUI/Tab.cpp:1795 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1800 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1802 src/libslic3r/PrintConfig.cpp:1474 #: src/libslic3r/PrintConfig.cpp:2334 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1813 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1823 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1829 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1836 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1846 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1849 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1862 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1885 src/slic3r/GUI/Tab.cpp:2173 #: src/libslic3r/PrintConfig.cpp:1969 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1886 src/slic3r/GUI/Tab.cpp:2174 #: src/libslic3r/PrintConfig.cpp:1919 src/libslic3r/PrintConfig.cpp:1934 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1893 src/slic3r/GUI/Tab.cpp:2181 #: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:436 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1943 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2039 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"Add physical " "printer\" item in the Printer combo box. The Physical Printer profile editor " "opens also when clicking on the \"cog\" icon in the Printer settings tab. " "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2072 src/slic3r/GUI/Tab.cpp:2254 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/UnsavedChangesDialog.cpp:1066 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2086 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2114 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2117 src/slic3r/GUI/Tab.cpp:2522 #: src/libslic3r/PrintConfig.cpp:1443 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2188 src/libslic3r/PrintConfig.cpp:194 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2195 src/libslic3r/PrintConfig.cpp:1182 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2202 src/libslic3r/PrintConfig.cpp:2227 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2209 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2216 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2222 src/libslic3r/PrintConfig.cpp:1960 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2228 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2261 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2276 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2277 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2283 src/slic3r/GUI/Tab.cpp:3934 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2300 src/slic3r/GUI/Tab.cpp:3930 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2359 src/slic3r/GUI/Tab.cpp:2455 #: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1246 #: src/libslic3r/PrintConfig.cpp:1263 src/libslic3r/PrintConfig.cpp:1280 #: src/libslic3r/PrintConfig.cpp:1296 src/libslic3r/PrintConfig.cpp:1306 #: src/libslic3r/PrintConfig.cpp:1316 src/libslic3r/PrintConfig.cpp:1326 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2384 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2390 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2399 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2404 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2411 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2416 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2480 src/slic3r/GUI/Tab.cpp:2488 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2489 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2520 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2544 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2549 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2555 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2568 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2575 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2753 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2755 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3341 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3404 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3404 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3413 msgid "It's a last preset for this physical printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:3418 msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3430 msgid "" "The physical printer(s) below is based on the preset, you are going to " "delete." msgstr "" #: src/slic3r/GUI/Tab.cpp:3434 msgid "" "Note, that selected preset will be deleted from this/those printer(s) too." msgstr "" #: src/slic3r/GUI/Tab.cpp:3438 msgid "" "The physical printer(s) below is based only on the preset, you are going to " "delete." msgstr "" #: src/slic3r/GUI/Tab.cpp:3442 msgid "" "Note, that this/those printer(s) will be deleted after deleting of the " "selected preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3446 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3451 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3532 src/slic3r/GUI/Tab.cpp:3604 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3668 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:3671 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:3675 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:3697 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3699 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3701 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3703 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3708 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3710 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3713 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3715 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3725 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3727 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3730 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3733 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3735 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3741 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3742 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3748 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3749 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3893 src/slic3r/GUI/Tab.cpp:3895 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4017 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4022 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4045 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4050 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4124 msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:4126 src/libslic3r/PrintConfig.cpp:2908 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4126 src/libslic3r/PrintConfig.cpp:3010 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/Tab.hpp:373 src/slic3r/GUI/Tab.hpp:495 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:404 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:445 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:479 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:137 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:146 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:845 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:525 msgid "PrusaSlicer is closing: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:542 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:608 msgid "Old Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:609 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:640 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:641 msgid "Discard" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:642 msgid "Save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:662 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:664 msgid "" "You will not be asked about the unsaved changes the next time you close " "PrusaSlicer." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:665 msgid "" "You will not be asked about the unsaved changes the next time you switch a " "preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:666 msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:668 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:735 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:737 msgid "All settings changes will be discarded." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:740 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:740 msgid "Transfer the selected settings to the newly selected preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:744 msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:745 msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1004 msgid "The following presets were modified:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1009 msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1013 msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1014 msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1061 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1177 msgid "Old value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1178 msgid "New value" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125 #: src/slic3r/GUI/UpdateDialogs.cpp:183 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:249 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:287 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:309 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:15 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:41 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:83 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:85 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:89 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:91 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:142 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:254 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:255 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:263 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:264 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:276 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:285 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:286 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:365 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:623 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:624 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:145 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:148 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed:" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:83 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:89 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:91 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:185 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:191 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:727 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:731 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:734 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:151 msgid "Open G-code file:" msgstr "" #: src/libslic3r/GCode.cpp:602 msgid "There is an object with no extrusions on the first layer." msgstr "" #: src/libslic3r/GCode.cpp:620 msgid "Empty layers detected, the output would not be printable." msgstr "" #: src/libslic3r/GCode.cpp:621 msgid "Print z" msgstr "" #: src/libslic3r/GCode.cpp:622 msgid "" "This is usually caused by negligibly small extrusions or by a faulty model. " "Try to repair the model or change its orientation on the bed." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:360 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1667 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:955 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Preset.cpp:1258 msgid "filament" msgstr "" #: src/libslic3r/Print.cpp:1246 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1249 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1253 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1255 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1264 msgid "The Spiral Vase option can only be used when printing a single object." msgstr "" #: src/libslic3r/Print.cpp:1271 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1284 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:1290 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1292 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1294 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:1296 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:1298 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:1319 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1321 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1323 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1325 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1367 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:1393 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1402 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1405 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1416 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1424 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1428 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1450 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1455 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1614 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1640 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1649 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1672 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1676 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLA/Pad.cpp:532 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:628 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:640 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:646 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:661 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:668 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:784 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:44 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:359 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:65 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:192 msgid "Too many overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:201 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:247 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:411 src/libslic3r/SLAPrintSteps.cpp:420 #: src/libslic3r/SLAPrintSteps.cpp:459 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:451 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:619 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:72 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:56 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:61 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:66 msgid "Picture sizes to be stored into a .gcode and .sl1 files" msgstr "" #: src/libslic3r/PrintConfig.cpp:73 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:80 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:81 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:89 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:91 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:99 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:100 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance." msgstr "" #: src/libslic3r/PrintConfig.cpp:106 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:107 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:114 msgid "Name of the printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:121 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:127 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:129 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:145 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:151 msgid "Printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:152 msgid "Related printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:157 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:176 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:177 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:184 src/libslic3r/PrintConfig.cpp:2197 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:185 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:188 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:195 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:205 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:206 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:217 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:218 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:226 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:228 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:234 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:235 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:380 #: src/libslic3r/PrintConfig.cpp:909 src/libslic3r/PrintConfig.cpp:1037 #: src/libslic3r/PrintConfig.cpp:1269 src/libslic3r/PrintConfig.cpp:1318 #: src/libslic3r/PrintConfig.cpp:1328 src/libslic3r/PrintConfig.cpp:1522 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:243 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:245 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:248 src/libslic3r/PrintConfig.cpp:823 #: src/libslic3r/PrintConfig.cpp:1759 src/libslic3r/PrintConfig.cpp:1769 #: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/PrintConfig.cpp:2182 #: src/libslic3r/PrintConfig.cpp:2381 src/libslic3r/PrintConfig.cpp:2882 #: src/libslic3r/PrintConfig.cpp:3003 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:254 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:255 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:256 src/libslic3r/PrintConfig.cpp:835 #: src/libslic3r/PrintConfig.cpp:1157 src/libslic3r/PrintConfig.cpp:1336 #: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1651 #: src/libslic3r/PrintConfig.cpp:2559 src/libslic3r/PrintConfig.cpp:2796 #: src/libslic3r/PrintConfig.cpp:2922 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:263 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:265 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:275 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:277 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:278 src/libslic3r/PrintConfig.cpp:652 #: src/libslic3r/PrintConfig.cpp:660 src/libslic3r/PrintConfig.cpp:669 #: src/libslic3r/PrintConfig.cpp:677 src/libslic3r/PrintConfig.cpp:704 #: src/libslic3r/PrintConfig.cpp:723 src/libslic3r/PrintConfig.cpp:973 #: src/libslic3r/PrintConfig.cpp:1103 src/libslic3r/PrintConfig.cpp:1176 #: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1286 #: src/libslic3r/PrintConfig.cpp:1298 src/libslic3r/PrintConfig.cpp:1308 #: src/libslic3r/PrintConfig.cpp:1358 src/libslic3r/PrintConfig.cpp:1417 #: src/libslic3r/PrintConfig.cpp:1552 src/libslic3r/PrintConfig.cpp:1726 #: src/libslic3r/PrintConfig.cpp:1735 src/libslic3r/PrintConfig.cpp:2161 #: src/libslic3r/PrintConfig.cpp:2288 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:285 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:286 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:293 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:294 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:301 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:302 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:312 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:313 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:327 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:328 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:345 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:346 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:354 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:355 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:360 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:361 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:368 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:369 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:377 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:386 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:387 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:393 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:394 src/libslic3r/PrintConfig.cpp:2726 #: src/libslic3r/PrintConfig.cpp:2737 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:400 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:401 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:410 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:412 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:418 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:419 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:427 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:437 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:448 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:450 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:456 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:458 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:467 src/libslic3r/PrintConfig.cpp:888 #: src/libslic3r/PrintConfig.cpp:2142 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:468 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:469 src/libslic3r/PrintConfig.cpp:894 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:470 src/libslic3r/PrintConfig.cpp:898 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:471 src/libslic3r/PrintConfig.cpp:899 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:900 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:478 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:480 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:489 src/libslic3r/PrintConfig.cpp:500 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:491 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:494 src/libslic3r/PrintConfig.cpp:603 #: src/libslic3r/PrintConfig.cpp:931 src/libslic3r/PrintConfig.cpp:944 #: src/libslic3r/PrintConfig.cpp:1068 src/libslic3r/PrintConfig.cpp:1094 #: src/libslic3r/PrintConfig.cpp:1542 src/libslic3r/PrintConfig.cpp:1867 #: src/libslic3r/PrintConfig.cpp:2016 src/libslic3r/PrintConfig.cpp:2084 #: src/libslic3r/PrintConfig.cpp:2245 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:502 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:953 #: src/libslic3r/PrintConfig.cpp:1826 src/libslic3r/PrintConfig.cpp:1878 #: src/libslic3r/PrintConfig.cpp:2128 src/libslic3r/PrintConfig.cpp:2258 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:512 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:514 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:520 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:522 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:532 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:544 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:555 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:565 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:626 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:572 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:573 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:582 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:583 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:588 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:589 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:597 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:599 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:609 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:610 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:615 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:616 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:618 src/libslic3r/PrintConfig.cpp:1814 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:631 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:632 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:640 src/libslic3r/PrintConfig.cpp:1364 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:641 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:650 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:651 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:658 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:659 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:666 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:667 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:675 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:676 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:683 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:684 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:693 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:694 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:702 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:703 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:710 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:711 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:715 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:721 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:722 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:729 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:730 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:737 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:738 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:744 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:745 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:753 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:760 src/libslic3r/PrintConfig.cpp:2637 #: src/libslic3r/PrintConfig.cpp:2638 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:761 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:764 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:769 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:770 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:797 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:798 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:804 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:805 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:814 src/libslic3r/PrintConfig.cpp:2721 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:818 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:820 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:832 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:834 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:869 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:871 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:889 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:890 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:891 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:892 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:893 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:895 src/libslic3r/PrintConfig.cpp:2144 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:896 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:897 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:901 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:902 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:906 src/libslic3r/PrintConfig.cpp:915 #: src/libslic3r/PrintConfig.cpp:925 src/libslic3r/PrintConfig.cpp:959 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:907 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:916 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:917 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:927 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:940 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:949 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:950 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:960 msgid "First layer nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:961 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:971 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:979 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:980 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:987 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:988 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1013 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1018 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1019 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1026 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1027 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1035 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1043 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1045 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1048 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1054 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1056 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1064 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1074 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1075 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1080 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1082 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1089 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1091 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1102 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1110 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1111 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1124 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1125 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1133 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1134 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1140 src/libslic3r/PrintConfig.cpp:1142 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1154 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1156 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1164 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1166 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1183 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1194 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1195 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1203 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1204 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1209 msgid "How to apply limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1210 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1212 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1217 msgid "Emit to G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1218 msgid "Use for time estimate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1219 msgid "Ignore" msgstr "" #: src/libslic3r/PrintConfig.cpp:1242 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1243 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1244 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1245 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1248 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1249 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1250 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1251 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1259 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1260 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1261 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1262 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1265 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1266 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1267 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1268 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1276 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1277 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1278 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1279 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1282 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1283 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1284 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1285 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1295 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1297 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1305 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1307 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1315 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1317 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1325 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1327 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1334 src/libslic3r/PrintConfig.cpp:1343 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1335 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1344 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1354 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1355 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1365 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1374 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1375 src/libslic3r/PrintConfig.cpp:1386 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1379 src/libslic3r/PrintConfig.cpp:1390 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1385 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1397 src/libslic3r/PrintConfig.cpp:1406 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1398 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1407 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1415 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1416 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1423 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1424 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1433 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1434 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1444 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1449 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1450 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1467 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1468 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1475 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1482 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1483 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1492 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1494 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1500 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1501 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1509 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1510 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1518 src/libslic3r/PrintConfig.cpp:1536 #: src/libslic3r/PrintConfig.cpp:1549 src/libslic3r/PrintConfig.cpp:1559 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1519 msgid "" "This is the acceleration your printer will use for perimeters. A high value " "like 9000 usually gives good results if your hardware is up to the job. Set " "zero to disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1527 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1529 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1538 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1551 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1561 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1565 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1573 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1585 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1586 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1591 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1592 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1600 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1601 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1606 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1607 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1620 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1622 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1630 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1631 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1641 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1642 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1648 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1649 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1656 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1657 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1662 src/libslic3r/PrintConfig.cpp:1670 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1663 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1664 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1666 src/libslic3r/PrintConfig.cpp:1675 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1671 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1672 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1680 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1681 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1688 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1689 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1690 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1697 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1698 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1699 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1707 src/libslic3r/PrintConfig.cpp:1715 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1708 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1716 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1723 src/libslic3r/PrintConfig.cpp:1724 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1725 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1731 src/libslic3r/PrintConfig.cpp:1732 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1733 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1740 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1742 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1748 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1749 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1750 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1758 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1760 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1761 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1768 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1770 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1771 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1778 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1779 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1786 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1787 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1794 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:1795 msgid "" "If enabled, the skirt will be as tall as a highest printed object. This is " "useful to protect an ABS or ASA print from warping and detaching from print " "bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:1801 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1802 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1803 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1811 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1812 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1821 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1823 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1833 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1835 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1836 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1842 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1844 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1850 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1852 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1864 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1875 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1887 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:1894 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:1900 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1901 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: src/libslic3r/PrintConfig.cpp:1909 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:1910 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:1920 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:1935 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:1951 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1952 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1961 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:1970 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1978 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1979 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:1984 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:1985 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1990 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1991 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1998 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2000 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2004 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2006 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2012 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2014 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2024 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2026 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2036 src/libslic3r/PrintConfig.cpp:2831 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2042 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2044 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2051 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2052 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2057 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2059 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2064 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2070 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2072 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2081 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2090 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2092 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2097 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2099 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2106 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2108 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2115 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2117 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2126 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2135 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2137 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2143 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2149 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2151 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2160 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2167 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2169 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2175 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2177 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2189 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2191 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2198 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2201 msgid "Nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2207 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2209 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2215 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2216 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2228 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {previous_extruder} and " "{next_extruder} can be used. When a tool-changing command which changes to " "the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2241 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2253 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2268 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2269 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2277 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2280 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2287 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2295 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2296 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2302 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2303 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2309 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2310 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2320 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2321 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2327 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2328 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2335 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2341 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2342 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2348 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2349 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2358 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2359 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2365 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2366 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2373 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2379 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2380 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2387 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2388 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2395 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2396 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2402 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2403 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2409 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2411 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2419 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2420 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2487 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2488 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2493 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2494 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2499 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2501 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2507 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2512 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2513 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:2514 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2519 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2520 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:2521 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2526 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2527 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2533 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2534 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2539 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2540 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2541 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2548 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2549 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2550 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2557 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2558 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2565 src/libslic3r/PrintConfig.cpp:2566 #: src/libslic3r/PrintConfig.cpp:2567 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2573 src/libslic3r/PrintConfig.cpp:2574 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2575 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2581 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2583 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2590 src/libslic3r/PrintConfig.cpp:2591 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2592 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2604 src/libslic3r/PrintConfig.cpp:2605 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2616 src/libslic3r/PrintConfig.cpp:2617 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2624 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:2625 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2630 src/libslic3r/PrintConfig.cpp:2631 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:2632 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:2639 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2646 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2651 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2652 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2659 src/libslic3r/PrintConfig.cpp:2660 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2668 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:2676 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2682 src/libslic3r/PrintConfig.cpp:2683 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2690 src/libslic3r/PrintConfig.cpp:2691 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2699 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2705 src/libslic3r/PrintConfig.cpp:2706 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2712 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2713 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2725 src/libslic3r/PrintConfig.cpp:2736 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2747 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2749 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2754 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2756 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2763 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2765 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2772 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2774 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2782 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2784 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2792 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:2794 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:2803 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:2805 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:2813 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2814 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2822 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2823 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2824 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2836 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2838 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2847 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2849 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2857 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2859 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2866 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2869 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2879 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2881 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2889 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2891 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2898 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2900 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2910 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:2921 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:2927 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:2929 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2935 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:2937 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:2942 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2944 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2952 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2953 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:2966 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:2967 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:2977 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2979 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2999 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3001 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3012 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3017 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3019 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3024 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3026 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3035 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3037 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3044 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3046 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3053 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3056 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3063 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:3065 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:3070 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3072 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:3080 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:3082 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:3092 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3505 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:3506 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:3517 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:3518 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:3523 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3524 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3528 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3529 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3533 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:3534 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:3539 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:3544 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3545 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:3550 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:3551 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3556 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3557 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3562 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3563 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3567 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3568 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3572 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3573 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3577 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3578 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3588 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3589 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3594 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3615 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3616 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3620 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3621 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3624 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3625 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3629 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3630 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3634 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3639 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3643 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3647 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3648 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3652 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3653 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3658 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3663 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3666 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3667 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3676 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3677 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3680 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3681 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3684 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3685 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3690 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:3701 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3702 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3705 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3706 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:3712 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3713 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:114 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:158 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:261 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:422 msgid "Generating support material" msgstr ""