# Print profiles for the Rigid3D printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Rigid3D
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.1
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Rigid3D/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:Zero2]
name = Rigid3D Zero2
variants = 0.4
technology = FFF
family = Zero
bed_model = zero_bed.stl
bed_texture = zero2_bed.png
default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D

[printer_model:Zero3]
name = Rigid3D Zero3
variants = 0.4
technology = FFF
family = Zero
bed_model = zero_bed.stl
bed_texture = zero3_bed.png
default_materials =Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D

[printer_model:Mucit]
name = Rigid3D Mucit
variants = 0.4
technology = FFF
family = Mucit
bed_model = mucit_bed.stl
bed_texture = mucit_bed.png
default_materials = Generic PLA @Rigid3D; Rigid3D PLA @Rigid3D

[printer_model:Mucit2]
name = Rigid3D Mucit2
variants = 0.4
technology = FFF
family = Mucit
bed_model = mucit2_bed.stl
bed_texture = mucit2_bed.png
default_materials = Generic PLA @Rigid3D; Generic PETG @Rigid3D; Generic ABS @Rigid3D; Rigid3D PLA @Rigid3D; Generic Nylon @Rigid3D; Generic FLEX @Rigid3D

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_min_thickness = 0.8
bridge_acceleration = 0
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_separation = 0
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0
external_perimeter_speed = 50%
external_perimeters_first = 1
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 10%
fill_pattern = line
first_layer_acceleration = 0
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0
first_layer_height = 0.2
first_layer_speed = 50%
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 20
gcode_comments = 0
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = 
infill_acceleration = 0
infill_anchor = 2.5
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
inherits = 
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 0
mmu_segmented_region_max_width = 0
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 2
post_process = 
print_settings_id = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0
seam_position = random
single_extruder_multi_material_priming = 1
skirt_distance = 6
skirt_height = 1
skirts = 0
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 15
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 100%
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_style = organic
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
thick_bridges = 0
thin_walls = 1
top_fill_pattern = monotonic
top_infill_extrusion_width = 0
top_solid_infill_speed = 100%
top_solid_min_thickness = 0.8
travel_speed = 80
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0

[print:0.06mm - Ultra @Rigid3D]
inherits = *common*
layer_height = 0.06
bottom_solid_layers = 10
top_solid_layers = 14

[print:0.12mm - Super @Rigid3D]
inherits = *common*
layer_height = 0.12
bottom_solid_layers = 7
top_solid_layers = 7

[print:0.16mm - Good @Rigid3D]
inherits = *common*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 5

[print:0.20mm - Standard @Rigid3D]
inherits = *common*
layer_height = 0.20
bottom_solid_layers = 4
top_solid_layers = 4

[print:0.24mm - Draft @Rigid3D]
inherits = *common*
layer_height = 0.24
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.28mm - Low @Rigid3D]
inherits = *common*
layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4

[filament:*common*]
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_below_layer_time = 60
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_deretract_speed = nil
filament_diameter = 1.75
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_wipe = nil
min_print_speed = 10
slowdown_below_layer_time = 10
start_filament_gcode = "; Filament gcode\n"

[filament:*PLA*]
inherits = *common*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/
bridge_fan_speed = 100
cooling = 1
fan_always_on = 1
filament_type = PLA
full_fan_speed_layer = 4
max_fan_speed = 100
min_fan_speed = 100

[filament:*ABS*]
inherits = *common*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
cooling = 1
fan_always_on = 0
filament_type = ABS
max_fan_speed = 0
min_fan_speed = 0

[filament:*PETG*]
inherits = *common*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
cooling = 1
fan_always_on = 0
filament_type = PETG
max_fan_speed = 50
min_fan_speed = 30

[filament:*FLEX*]
inherits = *common*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
bridge_fan_speed = 100
cooling = 1
fan_always_on = 1
filament_type = FLEX
full_fan_speed_layer = 4
max_fan_speed = 100
min_fan_speed = 100

[filament:*NYLON*]
inherits = *common*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_RIGID3D.*/ and printer_notes=~/.*PRINTER_HAS_HEATEDBED.*/
cooling = 1
fan_always_on = 0
filament_type = NYLON
max_fan_speed = 0
min_fan_speed = 0

[filament:Generic PLA @Rigid3D]
inherits = *PLA*
bed_temperature = 55
filament_colour = #FFFF00
filament_density = 1.24
filament_max_volumetric_speed = 12
first_layer_temperature = 215
temperature = 215
first_layer_bed_temperature = 60

[filament:Rigid3D PLA @Rigid3D]
inherits = *PLA*
filament_colour = #FFFF00
filament_density = 1.24
first_layer_temperature = 210
temperature = 205
first_layer_bed_temperature = 60
bed_temperature = 55
filament_max_volumetric_speed = 12

[filament:Generic ABS @Rigid3D]
inherits = *ABS*
filament_colour = #49B928
filament_density = 1.04
first_layer_temperature = 235
temperature = 235
first_layer_bed_temperature = 100
bed_temperature = 100
filament_max_volumetric_speed = 8

[filament:Generic PETG @Rigid3D]
inherits = *PETG*
filament_colour = #FF8000
filament_density = 1.27
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 70
bed_temperature = 70
filament_max_volumetric_speed = 8

[filament:Generic FLEX @Rigid3D]
inherits = *FLEX*
filament_colour = #C80000
filament_density = 1.21
first_layer_temperature = 225
temperature = 225
first_layer_bed_temperature = 70
bed_temperature = 70
filament_max_volumetric_speed = 2.5

[filament:Generic Nylon @Rigid3D]
inherits = *NYLON*
filament_colour = #0AF1CE
filament_density = 1.12
first_layer_temperature = 250
temperature = 250
first_layer_bed_temperature = 100
bed_temperature = 100
filament_max_volumetric_speed = 8

# Common printer preset
[printer:*common*]
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode = 
color_change_gcode = M600
default_filament_profile = "Rigid3D PLA @Rigid3D"
default_print_profile = "0.20mm - Standard @Rigid3D"
deretract_speed = 0
extruder_offset = 0x0
gcode_flavor = marlin2
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n\n
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 1000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_travel = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 25
machine_max_feedrate_x = 120
machine_max_feedrate_y = 120
machine_max_feedrate_z = 20
machine_max_jerk_e = 5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.3
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.32
min_layer_height = 0.05
nozzle_diameter = 0.4
pause_print_gcode = M0
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
remaining_times = 0
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 25
silent_mode = 0
single_extruder_multi_material = 0
template_custom_gcode = 
thumbnails = 
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0

[printer:Rigid3D Zero2]
inherits = *common*
bed_shape = 0x0,200x0,200x200,0x200
max_print_height = 190
printer_model = Zero2
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO2\nPRINTER_HAS_HEATEDBED\n
start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
end_gcode = G1 X0 Y180\nM107\nG91\nG0 Z20\nT0\nG1 E-1\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n

[printer:Rigid3D Zero3]
inherits = *common*
bed_shape = 0x0,200x0,200x200,0x200
max_print_height = 200
printer_model = Zero3
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_ZERO3\nPRINTER_HAS_HEATEDBED\n
start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X190.0 Y0.1 Z0.3 F1500.0 E15\nG1 X190 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E30\nG1 Z2.0 F1500.0\nG92 E0\n
end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n

[printer:Rigid3D Mucit]
inherits = *common*
bed_shape = 0x0,150x0,150x150,0x150
max_print_height = 150
printer_model = Mucit
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT\n
start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
end_gcode = G1 X0 Y140\nM107\nG91\nG0 Z20\nT0\nG1 E-2\nM104 T0 S0\nG90\nG92 E0\nM140 S0\nM84\nM300 S2093 P150\nM300 S2637 P150\nM300 S3135 P150\nM300 S4186 P150\nM300 S3135 P150\nM300 S2637 P150\nM300 S2793 P150\nM300 S2349 P150\nM300 S1975 P150\nM300 S2093 P450\n

[printer:Rigid3D Mucit2]
inherits = *common*
bed_shape = 0x0,150x0,150x150,0x150
max_print_height = 150
printer_model = Mucit2
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RIGID3D\nPRINTER_MODEL_MUCIT2\nPRINTER_HAS_HEATEDBED\n
start_gcode = G21\nG92 E0\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nG28\nM420 S1\nM107\nG90\nM190 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nG1 X10.0 Y0.1 Z0.3 F3000.0\nG1 X140.0 Y0.1 Z0.3 F1500.0 E10\nG1 X140 Y0.4 Z0.3 F3000.0\nG1 X10.0 Y0.4 Z0.3 F1500.0 E20\nG1 Z2.0 F1500.0\nG92 E0\n
end_gcode = G92 E0\nT0\nG1 F1800 E-2\nG27 P2\nM107\nM104 T0 S0\nM140 S0\nG90\nG92 E0\nM18\n