# Print profiles for the gCreate printers.
#
# GTL Modified 220825 (at gCreate Shop)
# Speed improvements, start/end gCode changes

[vendor]
# Vendor name will be shown by the Config Wizard.
name = gCreate
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.1
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/gCreate/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.


#Basic methodology

#  Common settings are overridden by settings further down the line as they get more specific
#
#  Common printer settings > Common settings based on layer height > Name displayed on quality dropdown
#
#  Common filament settings > common filament settings based on type > Specific settings based on vendor   
#

[printer_model:GMAX15P]
name = gMax 1.5XT Plus
variants = 0.5; 0.3; 0.4; 0.8; 1.0
technology = FFF
family = GMAX
bed_model = gmax15p_bed.stl
bed_texture = gmax15p.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE

[printer_model:GMAX2]
name = gMax 2
variants = 0.5; 0.3; 0.4; 0.8; 1.0
technology = FFF
family = GMAX
#has to be named (printer)_bed.stl
bed_model = gmax2_bed.stl
bed_texture = gmax2.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE


[printer_model:GMAX2PRO]
name = gMax 2 Pro
variants = 0.5; 0.3; 0.4; 0.8; 1.0
technology = FFF
family = GMAX
#has to be named (printer)_bed.stl
bed_model = gmax2_bed.stl
bed_texture = gmax2.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE

[printer_model:GMAX2DUAL2IN1]
name = gMax 2 Dual 2in1
variants = 0.5
technology = FFF
family = GMAX
#has to be named (printer)_bed.stl
bed_model = gmax2_bed.stl
bed_texture = gmax2.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE

[printer_model:GMAX2DUAL]
name = gMax 2 Dual Chimera
variants = 0.5
technology = FFF
family = GMAX
#has to be named (printer)_bed.stl
bed_model = gmax2_bed.stl
bed_texture = gmax2.svg
default_materials = Generic PLA @GCREATE; Generic PETG @GCREATE; Generic ABS @GCREATE; Prusament PLA @GCREATE; Prusament PETG @GCREATE; Generic TPU 90A @GCREATE; Generic CF PETG @GCREATE; Generic CF Nylon @GCREATE; Generic CF PLA @GCREATE

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print presets for every printer model. will be overtaken by presets further down that are printer, filament nozzle or layer height specific
[print:*common*]
avoid_crossing_perimeters = 0
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 35
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 400
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0
external_perimeter_speed = 65%
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = 3dhoneycomb
first_layer_extrusion_width = 0
first_layer_height = 125%
first_layer_speed = 65%
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 15
notes = 
overhangs = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 0
skirts = 1
skirt_distance = 2
skirt_height = 1
small_perimeter_speed = 50%
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 80%
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.2
support_material_interface_contact_loops = 0
support_material_interface_layers = 4
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 40
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
top_infill_extrusion_width = 0
top_solid_infill_speed = 50%
travel_speed = 100
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 75
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0

##################################
#  SET LAYER HEIGHT VARIANTS     #
##################################

#common layer height variants

[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 150%
perimeters = 3
bottom_solid_layers = 6
top_solid_layers = 8

[print:*0.15mm*]
inherits = *common*
layer_height = 0.15
first_layer_height = 125%
perimeters = 3
bottom_solid_layers = 5
top_solid_layers = 6

[print:*0.20mm*]
inherits = *common*
layer_height = 0.2
first_layer_height = 125%
first_layer_speed = 50%
perimeters = 3
bottom_solid_layers = 3
top_solid_layers = 4


[print:*0.25mm*]
inherits = *common*
layer_height = 0.25
first_layer_height = 100%
first_layer_speed = 50%
top_infill_extrusion_width = 0
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.3mm*]
inherits = *common*
layer_height = 0.3
first_layer_height = 100%
first_layer_speed = 50%
top_infill_extrusion_width = 0
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.4mm*]
inherits = *common*
layer_height = 0.4
first_layer_height = 100%
first_layer_speed = 50%
top_infill_extrusion_width = 0
bottom_solid_layers = 3
top_solid_layers = 4


[print:*0.5mm*]
inherits = *common*
layer_height = 0.5
first_layer_height = 100%
first_layer_speed = 45%
top_infill_extrusion_width = 0
bottom_solid_layers = 3
top_solid_layers = 3

[print:*0.6mm*]
inherits = *common*
layer_height = 0.6
first_layer_height = 100%
first_layer_speed = 40%
top_infill_extrusion_width = 0
bottom_solid_layers = 3
top_solid_layers = 3

[print:*SLOW*]
#SPEED
perimeter_speed = 40
small_perimeter_speed = 35
external_perimeter_speed = 35
infill_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_speed = 35
bridge_speed = 35
gap_fill_speed = 30

[print:*FAST*]
#SPEED
perimeter_speed = 70
small_perimeter_speed = 85%
external_perimeter_speed = 75%
infill_speed = 85%
solid_infill_speed = 70%
top_solid_infill_speed = 65%
support_material_speed = 75%
bridge_speed = 45
gap_fill_speed = 30


#############################################################################
#  SET PRINTER AND NOZZLE SPECIFIC PROFLIES (THESE SHOW INT HE DROPDOWN)    #
#############################################################################

#we can add specific changes for specific printers and nozzle sizes. Just put in conditionals
# compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/ and printer_model=~/.*GMAX2PRO.*/ and nozzle_diameter[0]==0.5


#TEMPLATE

#SPEED SETTINGS
#[print:0.10mm - Very Thin Layers @GCREATE]
#perimeter_speed = 100%
#small_perimeter_speed = 100%
#external_perimeter_speed = 100%
#infill_speed = 100%
#solid_infill_speed = 100%
#top_solid_infill_speed = 100%
#support_material_speed = 100%
#bridge_speed = 100%
#don't adjust gap speed above 30 or it causes layer shifting
#gap_fill_speed = 30

#ADVANCED
#



[print:0.10mm - Very Thin Layers @GCREATE]
inherits = *0.10mm*
#Below works. Will only allow gMax 2 and gMax 2 Pro with specific nozzle sizes
#compatible_printers_condition = nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5 and printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2.*/
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.15mm - Thin Layers @GCREATE]
inherits = *0.15mm*
#Below works. Will only allow gMax 2 and gMax 2 Pro with specific nozzle sizes
#compatible_printers_condition = nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5 and printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2.*/
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.20mm - Standard Layers @GCREATE]
inherits = *0.20mm*
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.20mm - Standard Layers Slow (PETG and TPU) @GCREATE]
inherits = *0.20mm*; *SLOW*
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.20mm - Standard Layers Fast @GCREATE]
inherits = *0.20mm*; *FAST*
compatible_printers_condition = (nozzle_diameter[0]==0.3 or nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.25mm - Thick Layers @GCREATE]
inherits = *0.25mm*
compatible_printers_condition = (nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.30mm - Very Thick Layers @GCREATE]
inherits = *0.3mm*
compatible_printers_condition = (nozzle_diameter[0]==0.4 or nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.40mm - High Output Layers @GCREATE]
inherits = *0.4mm*
compatible_printers_condition = (nozzle_diameter[0]==0.5 or nozzle_diameter[0]==0.8 or nozzle_diameter[0]==1.0) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.50mm - High Output Layers @GCREATE]
inherits = *0.5mm*
compatible_printers_condition = (nozzle_diameter[0]==0.8 or nozzle_diameter[0]==1.0) and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.60mm - High Output Layers @GCREATE]
inherits = *0.6mm*
compatible_printers_condition = nozzle_diameter[0]==0.8 or nozzle_diameter[0]==1.0 and (printer_model=~/.*GMAX2PRO.*/ or printer_model=~/.*GMAX2/ or printer_model=~/.*GMAX15P.*/) and ! (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)

[print:0.20mm - Dual 2in1 @GCREATE]
inherits = *0.20mm*
compatible_printers_condition = (nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2DUAL2IN1/)
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_no_sparse_layers = 1
wipe_tower_rotation_angle = 0
wipe_tower_width = 75
wipe_tower_x = 100
wipe_tower_y = 300

[print:0.20mm - Dual Chimera @GCREATE]
inherits = *0.20mm*
compatible_printers_condition = (nozzle_diameter[0]==0.5) and (printer_model=~/.*GMAX2DUAL/) 
# wipe tower
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_no_sparse_layers = 1
wipe_tower_rotation_angle = 0
wipe_tower_width = 75
wipe_tower_x = 100
wipe_tower_y = 300
# ooze prevention
ooze_prevention = 1
standby_temperature_delta = -15

[print:0.20mm - Dual 2in1 PLA with PVA Support @GCREATE]
inherits = *0.20mm*; 0.20mm - Dual 2in1 @GCREATE
compatible_printers_condition = (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/)
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 0
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 400
dont_support_bridges = 0
draft_shield = 0
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0
external_perimeter_speed = 75%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.23
first_layer_speed = 35
gap_fill_speed = 30
gcode_comments = 0
gcode_label_objects = 1
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 80
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 15
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 65
perimeters = 4
post_process = 
print_settings_id = 0.20mm - Dual 2in1 @GCREATE PLA PVA Support
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 6
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 35
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance = 0
support_material_enforce_layers = 0
support_material_extruder = 2
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 2
support_material_interface_layers = 4
support_material_interface_spacing = 0
support_material_interface_speed = 90%
support_material_pattern = rectilinear-grid
support_material_spacing = 3
support_material_speed = 65
support_material_synchronize_layers = 1
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 0
thin_walls = 1
threads = 8
top_fill_pattern = monotonic
top_infill_extrusion_width = 0
top_solid_infill_speed = 35
top_solid_layers = 4
top_solid_min_thickness = 0
travel_speed = 130
wipe_tower = 1
wipe_tower_bridging = 20
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 75
wipe_tower_x = 50
wipe_tower_y = 400



##################################
#  SET FILAMENT VARIANTS         #
##################################

# TEMPLATE

#[filament:*PLA*]
#inherits = *common*

#filament_type = PLA
#filament_density = 1.24
#filament_cost = 20

#first_layer_bed_temperature = 60
#first_layer_temperature = 200
#temperature = 200
#bed_temperature = 60

#fan_always_on = 1
#cooling = 1
#disable_fan_first_layers = 1
#max_fan_speed = 90
#min_fan_speed = 90
#bridge_fan_speed = 75

#fan_below_layer_time = 15
#slowdown_below_layer_time = 10

#compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/


# Common filament preset across all filaments
[filament:*common*]
cooling = 0
extrusion_multiplier = 1
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
min_print_speed = 15
slowdown_below_layer_time = 10
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/


# Common filament preset across all PLA filaments
[filament:*PLA*]
inherits = *common*
extrusion_multiplier = 0.94
bed_temperature = 60
fan_below_layer_time = 15
filament_colour = #FF3232
filament_max_volumetric_speed = 0
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 200

filament_cooling_moves = 0
filament_loading_speed = 30
filament_loading_speed_start = 30
filament_ramming_parameters = "0"
filament_unload_time = 0
filament_unloading_speed = 30
filament_unloading_speed_start = 30

fan_always_on = 1
cooling = 1
disable_fan_first_layers = 1
max_fan_speed = 80
min_fan_speed = 40
bridge_fan_speed = 80
temperature = 200
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

[filament:*PET*]
inherits = *common*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 15
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 50
temperature = 240
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

[filament:*ABS*]
inherits = *common*
bed_temperature = 70
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 15
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = ABS
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 80
first_layer_temperature = 235
fan_always_on = 0
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 50
temperature = 235
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

[filament:*TPU90A*]
inherits = *common*
filament_type = TPU

filament_density = 1.20
filament_cost = 25

first_layer_bed_temperature = 60
first_layer_temperature = 215
temperature = 215
bed_temperature = 60

fan_always_on = 1
cooling = 1
disable_fan_first_layers = 1
max_fan_speed = 50
min_fan_speed = 35
bridge_fan_speed = 60

compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

[filament:*CFPETG*]
inherits = *common*; *PET*
filament_type = Carbon Fiber
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

[filament:*CFNYLON*]
inherits = *common*
filament_type = Carbon Fiber

#need to add speed, cooling, retraction and brim
temperature = 250
bed_temperature = 65
bridge_fan_speed = 50
first_layer_temperature = 250
first_layer_bed_temperature = 65
#filament_cost = 24.99
filament_density = 1.06
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

[filament:*CFPLA*]
inherits = *common*
filament_type = Carbon Fiber

#need to add speed, cooling, retraction and brim

#temperature = 245
#bed_temperature = 70
#first_layer_temperature = 245
#first_layer_bed_temperature = 70
#filament_cost = 24.99
#filament_density = 1.27
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

[filament:*WOODFILLPLA*]
inherits = *common*; *PLA*

#need to add speed, cooling, retraction and brim

#temperature = 245
#bed_temperature = 70
#first_layer_temperature = 245
#first_layer_bed_temperature = 70
#filament_cost = 24.99
#filament_density = 1.27

compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_GCREATE.*/

#specific filament settings per brand. These are the names displayed in the list
[filament:Prusament PLA @GCREATE]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 205
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 50
filament_cost = 24.99
filament_density = 1.24

[filament:Prusament PETG @GCREATE]
inherits = *PET*
filament_vendor = Prusa Polymers
temperature = 245
bed_temperature = 70
bridge_fan_speed = 50
first_layer_temperature = 245
first_layer_bed_temperature = 70
filament_cost = 24.99
filament_density = 1.27

[filament:Generic ABS @GCREATE]
inherits = *ABS*
filament_vendor = Generic

[filament:Generic PLA @GCREATE]
inherits = *PLA*
filament_vendor = Generic

[filament:Generic PLA no Heated Bed @GCREATE]
inherits = *PLA*
filament_vendor = Generic
# set bed to zero
first_layer_temperature = 205
temperature = 205
first_layer_bed_temperature = 0
bed_temperature = 0

[filament:Generic PETG @GCREATE]
inherits = *PET*
filament_vendor = Generic
temperature = 230
bed_temperature = 70
first_layer_temperature = 235
first_layer_bed_temperature = 70

[filament:Atomic PLA @GCREATE]
inherits = *PLA*
filament_vendor = Atomic Filament
temperature = 215
first_layer_temperature = 205
bed_temperature = 60

[filament:Push Plastic PLA @GCREATE]
inherits = *PLA*
filament_vendor = Push Plastic
temperature = 200
bed_temperature = 60

[filament:HT PLA @GCREATE]
inherits = *PLA*
filament_vendor = ProtoPasta
temperature = 250
bed_temperature = 70

[filament:Generic HIPS @GCREATE]
inherits = *PET*
filament_vendor = Generic
filament_density = 1.04
temperature = 230
first_layer_temperature = 235
bed_temperature = 100
first_layer_bed_temperature = 100
filament_type = HIPS

[filament:Generic TPU 90A @GCREATE]
inherits = *TPU90A*
filament_vendor = Generic

[filament:Generic CF PETG @GCREATE]
inherits = *CFPETG*
filament_vendor = Generic

[filament:Generic CF Nylon @GCREATE]
inherits = *CFNYLON*
filament_vendor = Generic

[filament:Generic CF PLA @GCREATE]
inherits = *CFPLA*
filament_vendor = Generic

[filament:ColorFabb Woodfill PLA @GCREATE]
inherits = *WOODFILLPLA*
filament_vendor = ColorFabb

[filament:Generic PVA @GCREATE - PLA and PVA Support]
bed_temperature = 0
bridge_fan_speed = 75
#compatible_printers_condition = (printer_model=~/.*GMAX2DUAL2IN1.*/ or printer_model=~/.*GMAX2DUAL.*/
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 15
filament_colour = #F5F2C4
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 0
filament_loading_speed = 30
filament_loading_speed_start = 30
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 7
filament_ramming_parameters = "0"
filament_settings_id = "Generic PVA Support @GCREATE"
filament_soluble = 1
filament_toolchange_delay = 0
filament_type = PVA
filament_unload_time = 0
filament_unloading_speed = 30
filament_unloading_speed_start = 30
filament_vendor = Generic
first_layer_temperature = 195
inherits = Generic PLA @GCREATE
max_fan_speed = 80
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "; Filament gcode\n"
temperature = 195

#################################
#  SET COMMON PRINTER SETTINGS  #
#################################

# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 1000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 800
machine_max_acceleration_y = 800
machine_max_acceleration_z = 15
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 70
single_extruder_multi_material = 0
thumbnails = 95x95
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0


###################################
#  SET PRINTER SPECIFIC PROFILES  #
###################################

[printer:*gCreate gMax 2*]
inherits = *common*
printer_model = GMAX2
#printer_variant = 0.5
max_layer_height = 0.7
min_layer_height = 0.15
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2
bed_shape = 0x0,457x0,457x457,0x457
max_print_height = 610
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 600
machine_max_acceleration_y = 600
machine_max_acceleration_z = 15
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 8
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
#nozzle_diameter = 0.7
retract_before_travel = 2
retract_length = 0.75
retract_speed = 70
deretract_speed = 40
retract_before_wipe = 70%
default_print_profile = 0.20mm - Standard Layers @GCREATE
start_gcode = M420 Z20\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0
end_gcode = M104 S0 T0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors

#[printer:*abl*]
#start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp#\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed #temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 #E0.0

[printer:*gCreate gMax 2 Pro*]
inherits = *common*
printer_model = GMAX2PRO
#printer_variant = 0.5
max_layer_height = 0.7
min_layer_height = 0.08
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2PRO
start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000
bed_shape = 0x0,457x0,457x457,0x457
max_print_height = 610

default_print_profile = 0.20mm - Standard Layers @GCREATE

[printer:*gCreate gMax 1.5XT Plus*]
inherits = *common*
printer_model = GMAX15P
#printer_variant = 0.5
max_layer_height = 0.6
min_layer_height = 0.08
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX15P
bed_shape = 0x0,410x0,410x410,0x410
max_print_height = 533

default_print_profile = 0.20mm - Standard Layers @GCREATE

[printer:*gCreate gMax 2 Dual 2in1*]
inherits = *common*
printer_model = GMAX2DUAL2IN1
max_layer_height = 0.7
min_layer_height = 0.08
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2DUAL2IN1
start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000
bed_shape = 0x0,457x0,457x457,0x457
max_print_height = 610
default_print_profile = 0.20mm - Standard Layers @GCREATE
single_extruder_multi_material = 1
#cooling tube retraction
cooling_tube_retraction = 30
cooling_tube_length = 6
parking_pos_retraction = 30
extra_loading_move = -1
#multi tool settings
extruder_colour = #FF3333;#0000CC
extruder_offset = 0x0,0x0
retract_length_toolchange = 30;30


[printer:*gCreate gMax 2 Dual Chimera*]
inherits = *common*
printer_model = GMAX2DUAL
max_layer_height = 0.7
min_layer_height = 0.08
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_GCREATE\nPRINTER_MODEL_GMAX2DUAL
start_gcode = G90\nG28\nM420 Z20\nG1 Z5 F5000\nM218 T1 X20 Y0 ; Set second extruder offset
end_gcode = M104 S0 T0 ; turn off temperature\nM104 S0 T1 ; turn off 2nd extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F3000 ; present print\n{if layer_z < max_print_height-10}G1 Z{z_offset+min(layer_z+70, max_print_height-10)} F600{endif} ; Move print head up\nM84 X Y E ; disable motors
bed_shape = 0x0,457x0,457x457,0x457
max_print_height = 610
default_print_profile = 0.20mm - Standard Layers @GCREATE
single_extruder_multi_material = 0
#multi tool settings
extruder_colour = #FF3333;#0000CC
extruder_offset = 0x0,20x0
retract_length_toolchange = 8,8
retract_speed = 70,70

##############################################
#  SET NOZZLE DIAMETER VARIANTS PER PRINTER  #
##############################################

#these are the names and printers displayed in the drop down menus when selecting profiles

#####################################
#gMax 1.5 XT+ and gMax 1.5+ profiles#
#####################################


[printer:gMax 1.5XT Plus - 0.3mm nozzle]
#match printer name above
inherits = *gCreate gMax 1.5XT Plus*
printer_variant = 0.3
nozzle_diameter = 0.3
max_layer_height = 0.25
min_layer_height = 0.08

[printer:gMax 1.5XT Plus - 0.4mm nozzle]
#match printer name above
inherits = *gCreate gMax 1.5XT Plus*
printer_variant = 0.4
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.12
#default_print_profile = 0.15mm - Thin Layers @GCREATE @0.4 nozzle

[printer:gMax 1.5XT Plus - 0.5mm nozzle]
#match printer name above
inherits = *gCreate gMax 1.5XT Plus*
printer_variant = 0.5
nozzle_diameter = 0.5
max_layer_height = 0.4
min_layer_height = 0.15
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5
#default_print_profile = 0.20mm - Normal Layers @GCREATE @0.5 nozzle

[printer:gMax 1.5XT Plus - 0.8mm nozzle]
#match printer name above
inherits = *gCreate gMax 1.5XT Plus*
printer_variant = 0.8
nozzle_diameter = 0.8
max_layer_height = 0.7
min_layer_height = 0.25
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5

[printer:gMax 1.5XT Plus - 1.0mm nozzle]
#match printer name above
inherits = *gCreate gMax 1.5XT Plus*
printer_variant = 1.0
nozzle_diameter = 1.0
max_layer_height = 0.8
min_layer_height = 0.3
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5


#################
#gMax 2 profiles#
#################

[printer:gMax 2 - 0.3mm nozzle]
#match printer name above
inherits = *gCreate gMax 2*
printer_variant = 0.3
nozzle_diameter = 0.3
max_layer_height = 0.25
min_layer_height = 0.08

[printer:gMax 2 - 0.4mm nozzle]
#match printer name above
inherits = *gCreate gMax 2*
printer_variant = 0.4
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.12
#default_print_profile = 0.15mm - Thin Layers @GCREATE @0.4 nozzle

[printer:gMax 2 - 0.5mm nozzle]
#match printer name above
inherits = *gCreate gMax 2*
printer_variant = 0.5
nozzle_diameter = 0.5
max_layer_height = 0.4
min_layer_height = 0.15
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5
#default_print_profile = 0.20mm - Normal Layers @GCREATE @0.5 nozzle

[printer:gMax 2 - 0.8mm nozzle]
#match printer name above
inherits = *gCreate gMax 2*
printer_variant = 0.8
nozzle_diameter = 0.8
max_layer_height = 0.7
min_layer_height = 0.25
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5

[printer:gMax 2 - 1.0mm nozzle]
#match printer name above
inherits = *gCreate gMax 2*
printer_variant = 1.0
nozzle_diameter = 1.0
max_layer_height = 0.8
min_layer_height = 0.3
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5


#####################
#gMax 2 Pro profiles#
#####################

[printer:gMax 2 Pro - 0.3mm nozzle]
#match printer name above
inherits = *gCreate gMax 2 Pro*
printer_variant = 0.3
nozzle_diameter = 0.3
max_layer_height = 0.25
min_layer_height = 0.08

[printer:gMax 2 Pro - 0.4mm nozzle]
#match printer name above
inherits = *gCreate gMax 2 Pro*
printer_variant = 0.4
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.12
#default_print_profile = 0.15mm - Thin Layers @GCREATE @0.4 nozzle

[printer:gMax 2 Pro - 0.5mm nozzle]
#match printer name above
inherits = *gCreate gMax 2 Pro*
printer_variant = 0.5
nozzle_diameter = 0.5
max_layer_height = 0.4
min_layer_height = 0.15
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5
#default_print_profile = 0.20mm - Normal Layers @GCREATE @0.5 nozzle

[printer:gMax 2 Pro - 0.8mm nozzle]
#match printer name above
inherits = *gCreate gMax 2 Pro*
printer_variant = 0.8
nozzle_diameter = 0.8
max_layer_height = 0.7
min_layer_height = 0.25
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5

[printer:gMax 2 Pro - 1.0mm nozzle]
#match printer name above
inherits = *gCreate gMax 2 Pro*
printer_variant = 1.0
nozzle_diameter = 1.0
max_layer_height = 0.8
min_layer_height = 0.3
#default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
#retract_length = 3.5

###########################
#gMax 2 Dual 2in1 profiles#
###########################

[printer:gMax 2 Dual 2in1 - 0.5, 0.5mm nozzle]
#match printer name above
inherits = *gCreate gMax 2 Dual 2in1*
printer_variant = 0.5
nozzle_diameter = 0.5, 0.5
max_layer_height = 0.4
min_layer_height = 0.15

##############################
#gMax 2 Dual Chimera profiles#
##############################

[printer:gMax 2 Dual Chimera - 0.5, 0.5mm nozzle]
inherits = *gCreate gMax 2 Dual Chimera*
printer_variant = 0.5
nozzle_diameter = 0.5, 0.5
max_layer_height = 0.4
min_layer_height = 0.15