# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-12-04 12:20+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:297 msgid "Portions copyright" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:132 src/slic3r/GUI/AboutDialog.cpp:261 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:134 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:204 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:236 src/slic3r/GUI/GUI_App.cpp:231 #: src/slic3r/GUI/MainFrame.cpp:152 msgid "Version" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:263 src/slic3r/GUI/GUI_App.cpp:236 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:264 src/slic3r/GUI/GUI_App.cpp:236 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:265 msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:266 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:78 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183 msgid "Unknown error occured during exporting G-code." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168 msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD " "card is write locked?\n" "Error message: %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:171 msgid "" "Copying of the temporary G-code to the output G-code failed. There might be " "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:174 msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:177 msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:180 msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:187 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:536 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:189 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:194 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:243 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:238 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:539 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:562 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162 #: src/slic3r/GUI/Tab.cpp:2532 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:94 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:756 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:110 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:121 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:237 #: src/slic3r/GUI/ConfigWizard.cpp:1359 src/slic3r/GUI/ConfigWizard.cpp:1373 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:88 #: src/slic3r/GUI/GCodeViewer.cpp:2324 src/slic3r/GUI/GCodeViewer.cpp:2330 #: src/slic3r/GUI/GCodeViewer.cpp:2338 src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75 #: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:93 #: src/libslic3r/PrintConfig.cpp:133 src/libslic3r/PrintConfig.cpp:231 #: src/libslic3r/PrintConfig.cpp:289 src/libslic3r/PrintConfig.cpp:364 #: src/libslic3r/PrintConfig.cpp:372 src/libslic3r/PrintConfig.cpp:422 #: src/libslic3r/PrintConfig.cpp:552 src/libslic3r/PrintConfig.cpp:563 #: src/libslic3r/PrintConfig.cpp:581 src/libslic3r/PrintConfig.cpp:759 #: src/libslic3r/PrintConfig.cpp:1232 src/libslic3r/PrintConfig.cpp:1413 #: src/libslic3r/PrintConfig.cpp:1474 src/libslic3r/PrintConfig.cpp:1492 #: src/libslic3r/PrintConfig.cpp:1510 src/libslic3r/PrintConfig.cpp:1568 #: src/libslic3r/PrintConfig.cpp:1578 src/libslic3r/PrintConfig.cpp:1699 #: src/libslic3r/PrintConfig.cpp:1707 src/libslic3r/PrintConfig.cpp:1748 #: src/libslic3r/PrintConfig.cpp:1756 src/libslic3r/PrintConfig.cpp:1766 #: src/libslic3r/PrintConfig.cpp:1774 src/libslic3r/PrintConfig.cpp:1782 #: src/libslic3r/PrintConfig.cpp:1845 src/libslic3r/PrintConfig.cpp:2111 #: src/libslic3r/PrintConfig.cpp:2182 src/libslic3r/PrintConfig.cpp:2216 #: src/libslic3r/PrintConfig.cpp:2345 src/libslic3r/PrintConfig.cpp:2424 #: src/libslic3r/PrintConfig.cpp:2431 src/libslic3r/PrintConfig.cpp:2438 #: src/libslic3r/PrintConfig.cpp:2468 src/libslic3r/PrintConfig.cpp:2478 #: src/libslic3r/PrintConfig.cpp:2488 src/libslic3r/PrintConfig.cpp:2648 #: src/libslic3r/PrintConfig.cpp:2682 src/libslic3r/PrintConfig.cpp:2821 #: src/libslic3r/PrintConfig.cpp:2830 src/libslic3r/PrintConfig.cpp:2839 #: src/libslic3r/PrintConfig.cpp:2849 src/libslic3r/PrintConfig.cpp:2914 #: src/libslic3r/PrintConfig.cpp:2924 src/libslic3r/PrintConfig.cpp:2936 #: src/libslic3r/PrintConfig.cpp:2956 src/libslic3r/PrintConfig.cpp:2966 #: src/libslic3r/PrintConfig.cpp:2976 src/libslic3r/PrintConfig.cpp:2994 #: src/libslic3r/PrintConfig.cpp:3009 src/libslic3r/PrintConfig.cpp:3023 #: src/libslic3r/PrintConfig.cpp:3034 src/libslic3r/PrintConfig.cpp:3047 #: src/libslic3r/PrintConfig.cpp:3092 src/libslic3r/PrintConfig.cpp:3102 #: src/libslic3r/PrintConfig.cpp:3111 src/libslic3r/PrintConfig.cpp:3121 #: src/libslic3r/PrintConfig.cpp:3137 src/libslic3r/PrintConfig.cpp:3161 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:131 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:141 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:142 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:241 #: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:358 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:145 msgid "Invalid" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222 #: src/slic3r/GUI/GUI_ObjectList.cpp:2215 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:243 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1818 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:315 msgid "Texture" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405 msgid "Load..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413 #: src/slic3r/GUI/Tab.cpp:3475 msgid "Remove" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446 msgid "Not found:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:395 msgid "Model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:563 msgid "Choose an STL file to import bed shape from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619 #: src/slic3r/GUI/BedShapeDialog.cpp:642 msgid "Invalid file format." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:581 msgid "Error! Invalid model" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:589 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:593 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:608 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:631 msgid "Choose an STL file to import bed model from:" msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1318 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:47 msgid "" "Zero layer height is not valid.\n" "\n" "The layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:48 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1390 #: src/libslic3r/PrintConfig.cpp:71 msgid "Layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:59 msgid "" "Zero first layer height is not valid.\n" "\n" "The first layer height will be reset to 0.01." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:954 msgid "First layer height" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:80 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:88 msgid "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:89 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:114 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:118 msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:119 #: src/slic3r/GUI/ConfigManipulation.cpp:139 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:135 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:138 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:158 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:161 msgid "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:162 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:207 msgid "The %1% infill pattern is not supposed to work at 100%% density." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:209 msgid "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:210 #: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93 #: src/slic3r/GUI/GUI_ObjectList.cpp:652 src/slic3r/GUI/Plater.cpp:389 #: src/slic3r/GUI/Tab.cpp:1434 src/slic3r/GUI/Tab.cpp:1436 #: src/libslic3r/PrintConfig.cpp:246 src/libslic3r/PrintConfig.cpp:459 #: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:833 #: src/libslic3r/PrintConfig.cpp:847 src/libslic3r/PrintConfig.cpp:884 #: src/libslic3r/PrintConfig.cpp:1050 src/libslic3r/PrintConfig.cpp:1060 #: src/libslic3r/PrintConfig.cpp:1127 src/libslic3r/PrintConfig.cpp:1146 #: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1898 #: src/libslic3r/PrintConfig.cpp:1915 msgid "Infill" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:325 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:327 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:338 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/ConfigManipulation.cpp:340 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:141 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28 #: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/ExtrusionEntity.cpp:309 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44 msgid "Active" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 msgid "PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1257 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/libslic3r/Preset.cpp:1259 msgid "SLA print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 src/slic3r/GUI/Plater.cpp:696 #: src/libslic3r/Preset.cpp:1260 msgid "SLA material" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:62 src/libslic3r/Preset.cpp:1261 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 src/slic3r/GUI/Tab.cpp:1307 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67 msgid "min PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69 msgid "max PrusaSlicer version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:84 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:87 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:113 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:237 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:241 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:305 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:305 msgid "Standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:306 src/slic3r/GUI/ConfigWizard.cpp:596 #: src/slic3r/GUI/Tab.cpp:3556 src/slic3r/GUI/UnsavedChangesDialog.cpp:927 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:307 src/slic3r/GUI/ConfigWizard.cpp:597 #: src/slic3r/GUI/DoubleSlider.cpp:1849 src/slic3r/GUI/Plater.cpp:361 #: src/slic3r/GUI/Plater.cpp:504 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:443 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:445 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:447 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:449 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:454 msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:497 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:585 msgid "Printer:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:587 msgid "Vendor:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:588 msgid "Profile:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:660 src/slic3r/GUI/ConfigWizard.cpp:810 #: src/slic3r/GUI/ConfigWizard.cpp:871 src/slic3r/GUI/ConfigWizard.cpp:1008 msgid "(All)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:689 msgid "" "Filaments marked with * are not compatible with some installed " "printers." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:692 msgid "All installed printers are compatible with the selected filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:712 msgid "" "Only the following installed printers are compatible with the selected " "filament:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1098 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1098 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1100 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1102 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1127 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1127 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1135 src/slic3r/GUI/Preferences.cpp:73 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1139 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1145 src/slic3r/GUI/Preferences.cpp:108 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1149 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1152 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1157 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1164 src/slic3r/GUI/GUI_ObjectList.cpp:1793 #: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3101 #: src/slic3r/GUI/Plater.cpp:3935 src/slic3r/GUI/Plater.cpp:3966 msgid "Reload from disk" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1167 msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1171 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked.\n" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1181 msgid "Files association" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1183 src/slic3r/GUI/Preferences.cpp:91 msgid "Associate .3mf files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1184 src/slic3r/GUI/Preferences.cpp:98 msgid "Associate .stl files to PrusaSlicer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1195 msgid "View mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1197 msgid "" "PrusaSlicer's user interfaces comes in three variants:\n" "Simple, Advanced, and Expert.\n" "The Simple mode shows only the most frequently used settings relevant for " "regular 3D printing. The other two offer progressively more sophisticated " "fine-tuning, they are suitable for advanced and expert users, respectively." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1202 msgid "Simple mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1203 msgid "Advanced mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1204 msgid "Expert mode" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1210 msgid "The size of the object can be specified in inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1211 msgid "Use inches" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1245 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1249 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1280 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1280 src/slic3r/GUI/Tab.cpp:2173 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1284 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1318 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1321 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1341 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1341 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1355 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1358 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1368 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1369 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1372 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1406 msgid "Nozzle and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1406 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1422 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1423 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1426 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1427 src/slic3r/GUI/ConfigWizard.cpp:1441 #: src/libslic3r/PrintConfig.cpp:189 src/libslic3r/PrintConfig.cpp:935 #: src/libslic3r/PrintConfig.cpp:979 src/libslic3r/PrintConfig.cpp:2264 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1436 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1437 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1440 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1900 src/slic3r/GUI/ConfigWizard.cpp:2572 msgid "Filaments" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1900 src/slic3r/GUI/ConfigWizard.cpp:2574 msgid "SLA Materials" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1954 msgid "FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1959 msgid "SLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2265 src/slic3r/GUI/DoubleSlider.cpp:2232 #: src/slic3r/GUI/DoubleSlider.cpp:2252 src/slic3r/GUI/GUI.cpp:244 msgid "Notice" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2285 msgid "The following FFF printer models have no filament selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2289 msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2303 msgid "The following SLA printer models have no materials selected:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2307 msgid "Do you want to select default SLA materials for these printer models?" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2535 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2538 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2539 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2540 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2541 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:650 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2554 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2557 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2572 msgid "Filament Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2572 src/slic3r/GUI/ConfigWizard.cpp:2574 #: src/slic3r/GUI/GUI_ObjectList.cpp:4016 msgid "Type:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2574 msgid "SLA Material Profiles Selection" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2677 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2678 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2680 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:2681 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:96 msgid "Place bearings in slots and resume printing" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1211 msgid "One layer mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1213 msgid "Discard all custom changes" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1217 src/slic3r/GUI/DoubleSlider.cpp:1985 msgid "Jump to move" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1220 #, possible-c-format msgid "" "Jump to height %s\n" "Set ruler mode\n" "or Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1223 #, possible-c-format msgid "" "Jump to height %s\n" "or Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1228 msgid "Edit current color - Right click the colored slider segment" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1238 msgid "Print mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1252 msgid "Add extruder change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1254 msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1256 msgid "Add color change - Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1257 msgid "or press \"+\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1259 msgid "Add another code - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1260 msgid "Add another code - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1266 msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1275 msgid "Color change (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1276 msgid "Color change (\"%1%\") for Extruder %2%" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1278 msgid "Pause print (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1280 msgid "Custom template (\"%1%\")" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1282 msgid "Extruder (tool) is changed to Extruder \"%1%\"" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1289 msgid "Note" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1291 msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" "Editing it will cause changes of Slider data." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1294 msgid "" "There is a color change for extruder that won't be used till the end of " "print job.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1297 msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1300 msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1305 msgid "Delete tick mark - Left click or press \"-\" key" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1307 msgid "Edit tick mark - Ctrl + Left click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1308 msgid "Edit tick mark - Right click" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1408 src/slic3r/GUI/DoubleSlider.cpp:1442 #: src/slic3r/GUI/GUI_ObjectList.cpp:1832 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1409 src/slic3r/GUI/GUI_ObjectList.cpp:1833 msgid "active" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1418 msgid "Switch code to Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1418 src/slic3r/GUI/GUI_ObjectList.cpp:1800 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1419 msgid "Change extruder (N/A)" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1421 msgid "Use another extruder" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1443 msgid "used" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1451 msgid "Switch code to Color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1452 msgid "Add color change (%1%) for:" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1788 msgid "Add color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1798 msgid "Add pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1802 msgid "Add custom template" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1805 msgid "Add custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1823 msgid "Edit color" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1824 msgid "Edit pause print message" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1825 msgid "Edit custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1831 msgid "Delete color change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1832 msgid "Delete tool change" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1833 msgid "Delete pause print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1834 msgid "Delete custom G-code" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1844 src/slic3r/GUI/DoubleSlider.cpp:1985 msgid "Jump to height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1849 msgid "Hide ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1853 msgid "Show object height" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1853 msgid "Show object height on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1857 msgid "Show estimated print time" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1857 msgid "Show estimated print time on the ruler" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1861 msgid "Ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1861 msgid "Set ruler mode" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1866 msgid "Set extruder sequence for the entire print" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1952 msgid "Enter custom G-code used on current layer" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1953 msgid "Custom G-code on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1968 msgid "Enter short message shown on Printer display when a print is paused" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1969 msgid "Message for pause print on current layer (%1% mm)." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1984 msgid "Enter the move you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:1984 msgid "Enter the height you want to jump to" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2226 msgid "The last color change data was saved for a single extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2227 src/slic3r/GUI/DoubleSlider.cpp:2242 msgid "The last color change data was saved for a multi extruder printing." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2229 msgid "Your current changes will delete all saved color changes." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2230 src/slic3r/GUI/DoubleSlider.cpp:2250 msgid "Are you sure you want to continue?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2243 msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" "or CANCEL to leave it unchanged." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2246 msgid "Do you want to delete all saved tool changes?" msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2248 msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" #: src/slic3r/GUI/DoubleSlider.cpp:2249 msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" #: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:496 #: src/slic3r/GUI/GUI_ObjectList.cpp:508 src/slic3r/GUI/GUI_ObjectList.cpp:1015 #: src/slic3r/GUI/GUI_ObjectList.cpp:4454 #: src/slic3r/GUI/GUI_ObjectList.cpp:4464 #: src/slic3r/GUI/GUI_ObjectList.cpp:4499 #: src/slic3r/GUI/ObjectDataViewModel.cpp:209 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266 #: src/slic3r/GUI/ObjectDataViewModel.cpp:291 #: src/slic3r/GUI/ObjectDataViewModel.cpp:499 src/libslic3r/PrintConfig.cpp:539 msgid "default" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:24 msgid "Set extruder sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:40 msgid "Set extruder change for every" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:53 #: src/libslic3r/PrintConfig.cpp:405 src/libslic3r/PrintConfig.cpp:1063 #: src/libslic3r/PrintConfig.cpp:1688 src/libslic3r/PrintConfig.cpp:1853 #: src/libslic3r/PrintConfig.cpp:1920 src/libslic3r/PrintConfig.cpp:2127 #: src/libslic3r/PrintConfig.cpp:2173 msgid "layers" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:137 msgid "Set extruder(tool) sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:183 msgid "Remove extruder from sequence" msgstr "" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:193 msgid "Add extruder to sequence" msgstr "" #: src/slic3r/GUI/Field.cpp:184 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:187 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:198 src/slic3r/GUI/OptionsGroup.cpp:779 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:880 msgid "N/A" msgstr "" #: src/slic3r/GUI/Field.cpp:220 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:240 src/slic3r/GUI/Field.cpp:276 #: src/slic3r/GUI/Field.cpp:1430 src/slic3r/GUI/GUI_ObjectLayers.cpp:413 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:249 src/slic3r/GUI/Field.cpp:1442 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:292 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:295 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:805 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:289 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:852 #: src/slic3r/GUI/Mouse3DController.cpp:552 #: src/slic3r/GUI/PrintHostDialogs.cpp:187 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:902 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:906 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:220 msgid "Tool position" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:984 msgid "Generating toolpaths" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1375 msgid "Generating vertex buffer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:1468 msgid "Generating index buffers" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2212 msgid "Click to hide" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2212 msgid "Click to show" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2324 msgid "up to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2330 msgid "above" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2338 msgid "from" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2338 msgid "to" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2366 src/slic3r/GUI/GCodeViewer.cpp:2374 #: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:517 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2366 src/slic3r/GUI/GCodeViewer.cpp:2374 #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2374 msgid "Percentage" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2377 msgid "Height (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2378 msgid "Width (mm)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2379 msgid "Speed (mm/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2380 msgid "Fan Speed (%)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2381 msgid "Volumetric flow rate (mm³/s)" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2382 src/slic3r/GUI/GUI_Preview.cpp:218 #: src/slic3r/GUI/GUI_Preview.cpp:325 src/slic3r/GUI/GUI_Preview.cpp:468 #: src/slic3r/GUI/GUI_Preview.cpp:516 src/slic3r/GUI/GUI_Preview.cpp:855 msgid "Tool" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2383 src/slic3r/GUI/GUI_Preview.cpp:219 #: src/slic3r/GUI/GUI_Preview.cpp:514 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2419 src/slic3r/GUI/GCodeViewer.cpp:2454 #: src/slic3r/GUI/GCodeViewer.cpp:2459 src/slic3r/GUI/GUI_ObjectList.cpp:296 #: src/slic3r/GUI/wxExtensions.cpp:519 src/libslic3r/PrintConfig.cpp:534 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2430 msgid "Default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2454 msgid "default color" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2549 src/slic3r/GUI/GCodeViewer.cpp:2595 msgid "Color change" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2568 src/slic3r/GUI/GCodeViewer.cpp:2593 msgid "Print" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2594 src/slic3r/GUI/GCodeViewer.cpp:2611 msgid "Pause" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2599 src/slic3r/GUI/GCodeViewer.cpp:2602 msgid "Event" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2599 src/slic3r/GUI/GCodeViewer.cpp:2602 msgid "Remaining time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2602 msgid "Duration" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2637 src/slic3r/GUI/GUI_Preview.cpp:981 #: src/libslic3r/PrintConfig.cpp:2350 msgid "Travel" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2640 msgid "Movement" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2641 msgid "Extrusion" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2642 src/slic3r/GUI/Tab.cpp:1696 #: src/slic3r/GUI/Tab.cpp:2578 msgid "Retraction" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2660 src/slic3r/GUI/GCodeViewer.cpp:2663 #: src/slic3r/GUI/GUI_Preview.cpp:983 msgid "Wipe" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2695 src/slic3r/GUI/GUI_Preview.cpp:246 #: src/slic3r/GUI/GUI_Preview.cpp:262 msgid "Options" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2698 src/slic3r/GUI/GUI_Preview.cpp:985 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2699 src/slic3r/GUI/GUI_Preview.cpp:986 msgid "Deretractions" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2700 src/slic3r/GUI/GUI_Preview.cpp:987 msgid "Tool changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2701 src/slic3r/GUI/GUI_Preview.cpp:988 msgid "Color changes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2702 src/slic3r/GUI/GUI_Preview.cpp:989 msgid "Print pauses" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2703 src/slic3r/GUI/GUI_Preview.cpp:990 msgid "Custom G-codes" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2714 src/slic3r/GUI/GCodeViewer.cpp:2738 #: src/slic3r/GUI/Plater.cpp:697 src/libslic3r/PrintConfig.cpp:115 msgid "Printer" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2716 src/slic3r/GUI/GCodeViewer.cpp:2743 #: src/slic3r/GUI/Plater.cpp:693 msgid "Print settings" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2719 src/slic3r/GUI/GCodeViewer.cpp:2749 #: src/slic3r/GUI/Plater.cpp:694 src/slic3r/GUI/Tab.cpp:1796 #: src/slic3r/GUI/Tab.cpp:1797 msgid "Filament" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2774 src/slic3r/GUI/GCodeViewer.cpp:2779 #: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1135 #: src/slic3r/GUI/Plater.cpp:1220 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2774 msgid "Normal mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2779 msgid "Stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2806 msgid "Show stealth mode" msgstr "" #: src/slic3r/GUI/GCodeViewer.cpp:2810 msgid "Show normal mode" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:228 src/slic3r/GUI/GLCanvas3D.cpp:4542 msgid "Variable layer height" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:230 msgid "Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:232 msgid "Add detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:234 msgid "Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:236 msgid "Remove detail" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:238 msgid "Shift + Left mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:240 msgid "Reset to base" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:242 msgid "Shift + Right mouse button:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:244 msgid "Smoothing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:246 msgid "Mouse wheel:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:248 msgid "Increase/decrease edit area" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:251 msgid "Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:257 msgid "Quality / Speed" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:260 msgid "Higher print quality versus higher print speed." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:271 msgid "Smooth" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:277 src/libslic3r/PrintConfig.cpp:558 msgid "Radius" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:287 msgid "Keep min" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:296 src/slic3r/GUI/GLCanvas3D.cpp:3982 msgid "Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:558 msgid "Variable layer height - Manual edit" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:626 msgid "An object outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:627 msgid "A toolpath outside the print area was detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:628 msgid "SLA supports outside the print area were detected." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:629 msgid "Some objects are not visible." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:631 msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:941 msgid "Seq." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1445 msgid "Variable layer height - Reset" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1453 msgid "Variable layer height - Adaptive" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1461 msgid "Variable layer height - Smooth all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:1860 msgid "Mirror Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2724 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520 msgid "Gizmo-Move" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:2802 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522 msgid "Gizmo-Rotate" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3321 msgid "Move Object" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3790 src/slic3r/GUI/GLCanvas3D.cpp:4503 msgid "Switch to Settings" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3791 src/slic3r/GUI/GLCanvas3D.cpp:4503 msgid "Print Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3792 src/slic3r/GUI/GLCanvas3D.cpp:4504 msgid "Filament Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3792 src/slic3r/GUI/GLCanvas3D.cpp:4504 msgid "Material Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3793 src/slic3r/GUI/GLCanvas3D.cpp:4505 msgid "Printer Settings Tab" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3841 msgid "Undo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3841 msgid "Redo History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3862 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3862 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "" msgstr[1] "" #: src/slic3r/GUI/GLCanvas3D.cpp:3882 src/slic3r/GUI/GLCanvas3D.cpp:4521 #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Search.cpp:351 msgid "Search" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3896 src/slic3r/GUI/GLCanvas3D.cpp:3904 #: src/slic3r/GUI/Search.cpp:358 msgid "Enter a search term" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3935 msgid "Arrange options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3965 msgid "Use CTRL+left mouse key to enter text edit mode:" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3967 msgid "Spacing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3974 msgid "Enable rotations (slow)" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3992 src/slic3r/GUI/GLCanvas3D.cpp:4413 #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Plater.cpp:1645 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4387 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4395 src/slic3r/GUI/GUI_ObjectList.cpp:1846 #: src/slic3r/GUI/Plater.cpp:3932 src/slic3r/GUI/Plater.cpp:3956 #: src/slic3r/GUI/Tab.cpp:3475 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4404 src/slic3r/GUI/KBShortcutsDialog.cpp:116 #: src/slic3r/GUI/Plater.cpp:5043 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4413 src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Arrange selection" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4413 msgid "Click right mouse button to show arrangement options" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4435 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4444 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4456 src/slic3r/GUI/Plater.cpp:3791 #: src/slic3r/GUI/Plater.cpp:3803 src/slic3r/GUI/Plater.cpp:3941 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4467 src/slic3r/GUI/Plater.cpp:3943 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4480 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4490 src/slic3r/GUI/GUI_ObjectList.cpp:1618 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4592 src/slic3r/GUI/KBShortcutsDialog.cpp:117 #: src/slic3r/GUI/MainFrame.cpp:1128 msgid "Undo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4592 src/slic3r/GUI/GLCanvas3D.cpp:4631 msgid "Click right mouse button to open/close History" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4615 msgid "Next Undo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4631 src/slic3r/GUI/KBShortcutsDialog.cpp:118 #: src/slic3r/GUI/MainFrame.cpp:1131 msgid "Redo" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:4653 msgid "Next Redo action: %1%" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6275 msgid "Selection-Add from rectangle" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:6294 msgid "Selection-Remove from rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:3657 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33 msgid "Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57 msgid "Clipping of view" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27 msgid "Brush size" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28 msgid "Brush shape" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29 msgid "Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47 msgid "Enforce supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31 msgid "Right mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:373 msgid "Block supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33 msgid "Shift + Left mouse button" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:368 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:378 msgid "Remove selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35 msgid "Remove all selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36 msgid "Circle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37 #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Sphere" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:129 msgid "Autoset by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:118 msgid "Reset selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141 msgid "Alt + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:159 msgid "Paints all facets inside, regardless of their orientation." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:173 msgid "Ignores facets facing away from the camera." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:203 msgid "Ctrl + Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233 msgid "Autoset custom supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235 msgid "Threshold:" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242 msgid "Enforce" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245 msgid "Block" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295 msgid "Block supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296 msgid "Add supports by angle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40 msgid "Hollow this object" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41 msgid "Preview hollowed and drilled model" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42 msgid "Offset" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43 #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56 msgid "Quality" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44 #: src/libslic3r/PrintConfig.cpp:3153 msgid "Closing distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45 msgid "Hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46 msgid "Hole depth" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47 msgid "Remove selected holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48 msgid "Remove all holes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51 msgid "Show supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308 msgid "Add drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424 msgid "Delete drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624 msgid "Hollowing parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693 msgid "Change drainage hole diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785 msgid "Hollow and drill" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835 msgid "Move drainage hole" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 #: src/libslic3r/PrintConfig.cpp:3706 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/libslic3r/PrintConfig.cpp:3721 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:381 msgid "Enforce seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32 #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:383 msgid "Block seam" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46 msgid "Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 msgid "Head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 msgid "Minimal points distance" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 #: src/libslic3r/PrintConfig.cpp:2983 msgid "Support points density" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374 msgid "Add support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514 msgid "Delete support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694 msgid "Change point head diameter" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762 msgid "Support parameter change" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897 msgid "SLA gizmo turned on" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924 msgid "SLA gizmo turned off" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955 msgid "Move support point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048 msgid "Support points edit" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127 msgid "Autogeneration will erase all manually edited points." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128 msgid "Are you sure you want to do it?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 src/slic3r/GUI/GUI.cpp:256 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:557 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:581 #: src/slic3r/GUI/WipeTowerDialog.cpp:45 src/slic3r/GUI/WipeTowerDialog.cpp:366 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134 msgid "Autogenerate support points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521 msgid "Gizmo-Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630 msgid "Gizmo-Place on Face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:39 msgid "Entering Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40 msgid "Entering Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:47 msgid "Leaving Seam painting" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48 msgid "Leaving Paint-on supports" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:371 msgid "Add supports" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:235 msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:237 msgid "" "Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas " "Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:238 msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:378 msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " "(according to XDG Base Directory Specification) to \n" "%2%.\n" "\n" "This directory did not exist yet (maybe you run the new version for the " "first time).\n" "However, an old %1% configuration directory was detected in \n" "%3%.\n" "\n" "Consider moving the contents of the old directory to the new location in " "order to access your profiles, etc.\n" "Note that if you decide to downgrade %1% in future, it will use the old " "location again.\n" "\n" "What do you want to do now?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:386 #, possible-c-format msgid "%s - BREAKING CHANGE" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:388 msgid "Quit, I will move my data now" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:388 msgid "Start the application" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:576 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:579 msgid "Fatal error" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:699 msgid "" "Error parsing PrusaSlicer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error. Your user profiles will " "not be affected." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:705 msgid "" "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to " "manually delete the file to recover from the error." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:759 #, possible-c-format msgid "" "%s\n" "Do you want to continue?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:761 src/slic3r/GUI/UnsavedChangesDialog.cpp:659 msgid "Remember my choice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:796 msgid "Loading configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:864 msgid "Preparing settings tabs" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1109 msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1113 msgid "" "But since this version of PrusaSlicer we don't show this information in " "Printer Settings anymore.\n" "Settings will be available in physical printers settings." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1115 msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1118 src/slic3r/GUI/PhysicalPrinterDialog.cpp:626 msgid "Information" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1131 src/slic3r/GUI/GUI_App.cpp:1142 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1147 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1152 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1233 msgid "Choose one file (3MF/AMF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1245 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1257 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1268 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1330 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1330 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1460 msgid "modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1509 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1513 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1513 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1514 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1514 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1515 msgid "Check for updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1515 msgid "Check for configuration updates" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1518 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1524 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1529 src/slic3r/GUI/wxExtensions.cpp:677 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1529 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1531 src/slic3r/GUI/wxExtensions.cpp:679 msgctxt "Mode" msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1531 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1532 src/slic3r/GUI/wxExtensions.cpp:680 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1532 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1537 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1537 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1540 msgid "&Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1543 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1543 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1559 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1559 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1635 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1637 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1639 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1666 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1697 msgid "The preset(s) modifications are successfully saved" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1908 src/slic3r/GUI/Tab.cpp:3233 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1909 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1910 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 #: src/slic3r/GUI/Plater.cpp:2346 src/slic3r/GUI/Tab.cpp:3235 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:1927 msgid "Select a gcode file:" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:73 src/slic3r/GUI/GUI_Init.cpp:76 msgid "PrusaSlicer GUI initialization failed" msgstr "" #: src/slic3r/GUI/GUI_Init.cpp:76 msgid "Fatal error, exception catched: %1%" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:161 msgid "Remove layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:165 msgid "Add layer range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92 #: src/slic3r/GUI/GUI_ObjectList.cpp:651 src/libslic3r/PrintConfig.cpp:72 #: src/libslic3r/PrintConfig.cpp:218 src/libslic3r/PrintConfig.cpp:227 #: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:517 #: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:955 #: src/libslic3r/PrintConfig.cpp:1193 src/libslic3r/PrintConfig.cpp:1558 #: src/libslic3r/PrintConfig.cpp:1624 src/libslic3r/PrintConfig.cpp:1805 #: src/libslic3r/PrintConfig.cpp:2272 src/libslic3r/PrintConfig.cpp:2331 #: src/libslic3r/PrintConfig.cpp:2340 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95 #: src/slic3r/GUI/GUI_ObjectList.cpp:654 src/slic3r/GUI/GUI_Preview.cpp:238 #: src/slic3r/GUI/Tab.cpp:1474 src/slic3r/GUI/Tab.cpp:1476 #: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:352 #: src/libslic3r/PrintConfig.cpp:413 src/libslic3r/PrintConfig.cpp:1685 #: src/libslic3r/PrintConfig.cpp:2063 src/libslic3r/PrintConfig.cpp:2069 #: src/libslic3r/PrintConfig.cpp:2077 src/libslic3r/PrintConfig.cpp:2089 #: src/libslic3r/PrintConfig.cpp:2099 src/libslic3r/PrintConfig.cpp:2107 #: src/libslic3r/PrintConfig.cpp:2122 src/libslic3r/PrintConfig.cpp:2143 #: src/libslic3r/PrintConfig.cpp:2155 src/libslic3r/PrintConfig.cpp:2171 #: src/libslic3r/PrintConfig.cpp:2180 src/libslic3r/PrintConfig.cpp:2189 #: src/libslic3r/PrintConfig.cpp:2200 src/libslic3r/PrintConfig.cpp:2214 #: src/libslic3r/PrintConfig.cpp:2222 src/libslic3r/PrintConfig.cpp:2223 #: src/libslic3r/PrintConfig.cpp:2232 src/libslic3r/PrintConfig.cpp:2240 #: src/libslic3r/PrintConfig.cpp:2254 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99 #: src/slic3r/GUI/GUI_ObjectList.cpp:658 src/libslic3r/PrintConfig.cpp:2450 #: src/libslic3r/PrintConfig.cpp:2458 msgid "Wipe options" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:45 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:51 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:52 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:53 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:54 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:653 #: src/slic3r/GUI/GUI_Preview.cpp:234 src/slic3r/GUI/Tab.cpp:1444 #: src/libslic3r/ExtrusionEntity.cpp:316 src/libslic3r/ExtrusionEntity.cpp:344 #: src/libslic3r/PrintConfig.cpp:1200 src/libslic3r/PrintConfig.cpp:1206 #: src/libslic3r/PrintConfig.cpp:1220 src/libslic3r/PrintConfig.cpp:1230 #: src/libslic3r/PrintConfig.cpp:1238 src/libslic3r/PrintConfig.cpp:1240 msgid "Ironing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:655 #: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1500 #: src/libslic3r/PrintConfig.cpp:278 src/libslic3r/PrintConfig.cpp:505 #: src/libslic3r/PrintConfig.cpp:986 src/libslic3r/PrintConfig.cpp:1166 #: src/libslic3r/PrintConfig.cpp:1239 src/libslic3r/PrintConfig.cpp:1614 #: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:1938 #: src/libslic3r/PrintConfig.cpp:2316 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:656 #: src/slic3r/GUI/Tab.cpp:1536 src/slic3r/GUI/Tab.cpp:2113 #: src/libslic3r/PrintConfig.cpp:535 src/libslic3r/PrintConfig.cpp:1120 #: src/libslic3r/PrintConfig.cpp:1592 src/libslic3r/PrintConfig.cpp:1907 #: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2162 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:657 #: src/libslic3r/PrintConfig.cpp:494 src/libslic3r/PrintConfig.cpp:602 #: src/libslic3r/PrintConfig.cpp:942 src/libslic3r/PrintConfig.cpp:1128 #: src/libslic3r/PrintConfig.cpp:1601 src/libslic3r/PrintConfig.cpp:1927 #: src/libslic3r/PrintConfig.cpp:2144 src/libslic3r/PrintConfig.cpp:2304 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:661 #: src/slic3r/GUI/Tab.cpp:1430 src/slic3r/GUI/Tab.cpp:1454 #: src/slic3r/GUI/Tab.cpp:1557 src/slic3r/GUI/Tab.cpp:1560 #: src/slic3r/GUI/Tab.cpp:1856 src/slic3r/GUI/Tab.cpp:2193 #: src/slic3r/GUI/Tab.cpp:4105 src/libslic3r/PrintConfig.cpp:90 #: src/libslic3r/PrintConfig.cpp:130 src/libslic3r/PrintConfig.cpp:266 #: src/libslic3r/PrintConfig.cpp:1071 src/libslic3r/PrintConfig.cpp:1155 #: src/libslic3r/PrintConfig.cpp:2474 src/libslic3r/PrintConfig.cpp:2646 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:663 #: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4039 #: src/slic3r/GUI/Tab.cpp:4040 src/libslic3r/PrintConfig.cpp:2812 #: src/libslic3r/PrintConfig.cpp:2819 src/libslic3r/PrintConfig.cpp:2828 #: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2847 #: src/libslic3r/PrintConfig.cpp:2857 src/libslic3r/PrintConfig.cpp:2894 #: src/libslic3r/PrintConfig.cpp:2901 src/libslic3r/PrintConfig.cpp:2912 #: src/libslic3r/PrintConfig.cpp:2922 src/libslic3r/PrintConfig.cpp:2931 #: src/libslic3r/PrintConfig.cpp:2944 src/libslic3r/PrintConfig.cpp:2954 #: src/libslic3r/PrintConfig.cpp:2963 src/libslic3r/PrintConfig.cpp:2973 #: src/libslic3r/PrintConfig.cpp:2984 src/libslic3r/PrintConfig.cpp:2992 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:664 #: src/slic3r/GUI/Plater.cpp:500 src/slic3r/GUI/Tab.cpp:4080 #: src/slic3r/GUI/Tab.cpp:4081 src/slic3r/GUI/Tab.cpp:4152 #: src/libslic3r/PrintConfig.cpp:3000 src/libslic3r/PrintConfig.cpp:3007 #: src/libslic3r/PrintConfig.cpp:3021 src/libslic3r/PrintConfig.cpp:3032 #: src/libslic3r/PrintConfig.cpp:3042 src/libslic3r/PrintConfig.cpp:3064 #: src/libslic3r/PrintConfig.cpp:3075 src/libslic3r/PrintConfig.cpp:3082 #: src/libslic3r/PrintConfig.cpp:3089 src/libslic3r/PrintConfig.cpp:3100 #: src/libslic3r/PrintConfig.cpp:3109 src/libslic3r/PrintConfig.cpp:3118 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4098 #: src/slic3r/GUI/Tab.cpp:4099 src/libslic3r/SLA/Hollowing.cpp:45 #: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66 #: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3128 #: src/libslic3r/PrintConfig.cpp:3135 src/libslic3r/PrintConfig.cpp:3145 #: src/libslic3r/PrintConfig.cpp:3154 msgid "Hollowing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:284 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:300 src/slic3r/GUI/GUI_ObjectList.cpp:441 msgid "Editing" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:386 #, possible-c-format msgid "Auto-repaired (%d errors):" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:393 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:394 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:395 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:396 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:397 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:398 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:406 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:443 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:445 msgid "Click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:449 msgid "Right button click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:451 msgid "Click the icon to change the object printable property" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:574 msgid "Change Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:589 msgid "Rename Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:589 msgid "Rename Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1215 #: src/slic3r/GUI/GUI_ObjectList.cpp:4244 msgid "Instances to Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1230 msgid "Volumes in Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1230 msgid "Object reordered" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1306 #: src/slic3r/GUI/GUI_ObjectList.cpp:1661 #: src/slic3r/GUI/GUI_ObjectList.cpp:1667 #: src/slic3r/GUI/GUI_ObjectList.cpp:2008 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1396 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1445 msgid "Add Settings for Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1446 msgid "Add Settings for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1447 msgid "Add Settings for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1517 msgid "Add Settings Bundle for Height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1518 msgid "Add Settings Bundle for Sub-object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1519 msgid "Add Settings Bundle for Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1558 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 #: src/slic3r/GUI/GUI_ObjectList.cpp:1595 #: src/slic3r/GUI/GUI_ObjectList.cpp:1599 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1563 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1631 msgid "Height range Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1640 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1718 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1728 #: src/slic3r/GUI/GUI_ObjectList.cpp:1740 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1740 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1750 msgid "Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1765 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1776 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1786 src/slic3r/GUI/Plater.cpp:3969 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1793 #: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3935 msgid "Reload the selected volumes from disk" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1800 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1832 src/libslic3r/PrintConfig.cpp:378 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1852 msgid "Scale to print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1852 msgid "Scale the selected object to fit the print volume" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1858 src/slic3r/GUI/Plater.cpp:5160 msgid "Convert from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1861 src/slic3r/GUI/Plater.cpp:5160 msgid "Revert conversion from imperial units" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1868 #: src/slic3r/GUI/GUI_ObjectList.cpp:1876 #: src/slic3r/GUI/GUI_ObjectList.cpp:2569 src/libslic3r/PrintConfig.cpp:3697 msgid "Merge" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1868 msgid "Merge objects to the one multipart object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1876 msgid "Merge objects to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1953 #: src/slic3r/GUI/GUI_ObjectList.cpp:2210 msgid "Add Shape" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2038 msgid "Load Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2077 msgid "Error!" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2152 msgid "Add Generic Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2181 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2307 #: src/slic3r/GUI/GUI_ObjectList.cpp:2408 msgid "Last instance of an object cannot be deleted." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2319 msgid "Delete Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2341 msgid "Delete All Instances from Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2357 msgid "Delete Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2389 msgid "From Object List You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2393 msgid "Delete Subobject" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2412 msgid "Delete Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2436 src/slic3r/GUI/Plater.cpp:2850 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2440 msgid "Split to Parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2576 msgid "Merged" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2660 msgid "Merge all parts to the one single object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2692 msgid "Add Layers" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2846 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2858 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2871 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2875 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2880 msgid "Layer range Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2886 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2892 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2899 msgid "Height ranges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2899 msgid "Settings for height range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3083 msgid "Delete Selected Item" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3221 msgid "Delete Selected" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3297 #: src/slic3r/GUI/GUI_ObjectList.cpp:3325 #: src/slic3r/GUI/GUI_ObjectList.cpp:3345 msgid "Add Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3391 msgid "" "Cannot insert a new layer range after the current layer range.\n" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3395 msgid "" "Cannot insert a new layer range between the current and the next layer " "range.\n" "The gap between the current layer range and the next layer range\n" "is thinner than the minimum layer height allowed." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3400 msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3459 msgid "Edit Height Range" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3754 msgid "Selection-Remove from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3762 msgid "Selection-Add from list" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3880 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3881 #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3881 msgid "Layer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3883 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3884 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3885 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3888 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:3893 #: src/slic3r/GUI/GUI_ObjectList.cpp:3968 src/slic3r/GUI/Plater.cpp:143 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4009 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Support Enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4014 msgid "Support Blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4016 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4021 msgid "Change Part Type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4266 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4266 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4282 #: src/slic3r/GUI/GUI_ObjectList.cpp:4409 #: src/slic3r/GUI/SavePresetDialog.cpp:101 #: src/slic3r/GUI/SavePresetDialog.cpp:109 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4283 #: src/slic3r/GUI/GUI_ObjectList.cpp:4410 #: src/slic3r/GUI/SavePresetDialog.cpp:102 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4458 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4459 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4484 msgid "Change Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1512 msgid "Set Printable" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1512 msgid "Set Unprintable" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:631 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:505 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506 #: src/slic3r/GUI/Mouse3DController.cpp:487 #: src/slic3r/GUI/Mouse3DController.cpp:508 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305 msgid "Set Mirror" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 msgid "in" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357 msgid "Drop to bed" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372 msgid "Reset rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394 msgid "Reset Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 msgid "Reset scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:561 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:625 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797 msgid "Set Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:828 msgid "Set Orientation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:893 msgid "Set Scale" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:925 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:928 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:62 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:98 msgid "Remove parameter" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:104 #, possible-c-format msgid "Delete Option %s" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:157 #, possible-c-format msgid "Change Option %s" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:210 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:547 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2436 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:216 src/slic3r/GUI/Tab.cpp:1842 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:217 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:222 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:225 src/slic3r/GUI/GUI_Preview.cpp:243 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/ExtrusionEntity.cpp:310 #: src/libslic3r/ExtrusionEntity.cpp:332 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/ExtrusionEntity.cpp:311 #: src/libslic3r/ExtrusionEntity.cpp:334 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/ExtrusionEntity.cpp:312 #: src/libslic3r/ExtrusionEntity.cpp:336 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/ExtrusionEntity.cpp:313 #: src/libslic3r/ExtrusionEntity.cpp:338 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/ExtrusionEntity.cpp:314 #: src/libslic3r/ExtrusionEntity.cpp:340 src/libslic3r/PrintConfig.cpp:1926 #: src/libslic3r/PrintConfig.cpp:1937 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/ExtrusionEntity.cpp:315 #: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2303 #: src/libslic3r/PrintConfig.cpp:2315 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:235 src/libslic3r/ExtrusionEntity.cpp:317 #: src/libslic3r/ExtrusionEntity.cpp:346 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:236 src/libslic3r/ExtrusionEntity.cpp:318 #: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:985 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:237 src/slic3r/GUI/Tab.cpp:1464 #: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/ExtrusionEntity.cpp:350 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:321 #: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:2188 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:240 src/slic3r/GUI/Tab.cpp:1547 #: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/ExtrusionEntity.cpp:356 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:991 msgid "Shells" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:992 msgid "Tool marker" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:993 msgid "Legend/Estimated printing time" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:804 src/slic3r/GUI/Search.cpp:389 msgid "Use for search" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:805 src/slic3r/GUI/Search.cpp:383 msgid "Category" msgstr "" #: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:385 msgid "Search in English" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:146 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:176 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182 msgid "Arranging canceled." msgstr "" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Jobs/Job.cpp:75 msgid "ERROR: not enough resources to execute a new job." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73 msgid "Orientation search canceled." msgstr "" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35 msgid "Choose SLA archive:" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39 msgid "Import file" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46 msgid "Import model and profile" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47 msgid "Import profile only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48 msgid "Import model only" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59 msgid "Accurate" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60 msgid "Balanced" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61 msgid "Quick" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135 msgid "Importing SLA archive" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159 msgid "Importing canceled." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160 msgid "Importing done." msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2344 msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2345 #: src/slic3r/GUI/Tab.cpp:3234 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:34 src/slic3r/GUI/MainFrame.cpp:897 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:97 msgid "New project, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:98 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:99 msgid "Save project (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:100 msgid "Save project as (3mf)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:101 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:103 msgid "Import STL/OBJ/AMF/3MF without config, keep plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 msgid "Import Config from ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:105 msgid "Load Config from ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:107 src/slic3r/GUI/Plater.cpp:770 #: src/slic3r/GUI/Plater.cpp:5985 src/libslic3r/PrintConfig.cpp:3602 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:5986 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Export config" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:110 src/slic3r/GUI/Plater.cpp:758 msgid "Export to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 msgid "Eject SD card / Flash drive" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:113 msgid "Select all objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 msgid "Deselect all" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:115 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 msgid "Reload plater from disk" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:124 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:125 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 #: src/slic3r/GUI/PrintHostDialogs.cpp:163 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:132 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:133 msgid "Show/Hide object/instance labels" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 src/slic3r/GUI/Preferences.cpp:12 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Commands" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "" "Press to select multiple objects\n" "or move multiple objects with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "Press to activate selection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Press to activate deselection rectangle" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 #: src/slic3r/GUI/KBShortcutsDialog.cpp:241 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 msgid "Move selection 10 mm in positive Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:231 #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Move selection 10 mm in negative Y direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 #: src/slic3r/GUI/KBShortcutsDialog.cpp:232 #: src/slic3r/GUI/KBShortcutsDialog.cpp:238 #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 #: src/slic3r/GUI/KBShortcutsDialog.cpp:255 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Move selection 10 mm in negative X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 #: src/slic3r/GUI/KBShortcutsDialog.cpp:210 #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 #: src/slic3r/GUI/KBShortcutsDialog.cpp:244 #: src/slic3r/GUI/KBShortcutsDialog.cpp:256 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Move selection 10 mm in positive X direction" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Any arrow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Movement step set to 1 mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:155 msgid "Movement in camera space" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Page Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Rotate selection 45 degrees CCW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Page Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:157 msgid "Rotate selection 45 degrees CW" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:158 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:159 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:160 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:161 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:162 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:163 msgid "Gizmo SLA hollow" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:164 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:165 msgid "Unselect gizmo or clear selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:166 msgid "Change camera type (perspective, orthographic)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:168 msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:169 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:170 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 msgid "Switch between Editor/Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 msgid "Collapse/Expand the sidebar" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:175 msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:177 #: src/slic3r/GUI/KBShortcutsDialog.cpp:181 msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:190 src/slic3r/GUI/MainFrame.cpp:327 #: src/slic3r/GUI/MainFrame.cpp:339 msgid "Plater" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:193 msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:194 msgid "Gizmo move: Press to snap by 1mm" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:195 msgid "Gizmo scale: Press to snap by 5%" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 msgid "Gizmo scale: Scale selection to fit print volume" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 msgid "Gizmo scale: Press to activate one direction scaling" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:202 msgid "Gizmos" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 #: src/slic3r/GUI/KBShortcutsDialog.cpp:211 #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 msgid "Vertical slider - Move active thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 #: src/slic3r/GUI/KBShortcutsDialog.cpp:212 #: src/slic3r/GUI/KBShortcutsDialog.cpp:231 msgid "Vertical slider - Move active thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 #: src/slic3r/GUI/KBShortcutsDialog.cpp:213 #: src/slic3r/GUI/KBShortcutsDialog.cpp:238 msgid "Horizontal slider - Move active thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:210 #: src/slic3r/GUI/KBShortcutsDialog.cpp:214 #: src/slic3r/GUI/KBShortcutsDialog.cpp:239 msgid "Horizontal slider - Move active thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 msgid "On/Off one layer mode of the vertical slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:216 msgid "Show/Hide Legend and Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:218 msgid "Upper layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 msgid "Lower layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 msgid "Show/Hide Legend & Estimated printing time" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 src/slic3r/GUI/Plater.cpp:4135 #: src/slic3r/GUI/Tab.cpp:2598 msgid "Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:232 msgid "Vertical slider - Set upper thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:233 msgid "Vertical slider - Set lower thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:234 msgid "Vertical slider - Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:235 msgid "Vertical slider - Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:236 msgid "Horizontal slider - Set left thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:237 msgid "Horizontal slider - Set right thumb as active" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:241 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:244 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:245 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:248 #: src/slic3r/GUI/KBShortcutsDialog.cpp:249 #: src/slic3r/GUI/KBShortcutsDialog.cpp:257 #: src/slic3r/GUI/KBShortcutsDialog.cpp:258 msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:252 msgid "Layers Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:255 msgid "Move active slider thumb Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:256 msgid "Move active slider thumb Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:261 msgid "Sequential Slider" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:284 msgid "Keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:1188 msgid "Open new instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:80 #: src/slic3r/GUI/MainFrame.cpp:1188 msgid "Open a new PrusaSlicer instance" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:69 src/slic3r/GUI/MainFrame.cpp:82 msgid "G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:69 src/slic3r/GUI/MainFrame.cpp:1094 msgid "Open G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1252 msgid "Open PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:82 msgid "Open new G-code viewer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:154 msgid "" "Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/" "releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:506 msgid "based on Slic3r" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:869 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:869 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:871 msgid "Software &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:871 msgid "Open the software releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:877 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:878 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:884 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:884 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:886 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:886 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:888 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:888 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:891 src/slic3r/GUI/MainFrame.cpp:894 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:891 src/slic3r/GUI/MainFrame.cpp:894 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:897 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:911 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:911 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:915 src/libslic3r/PrintConfig.cpp:2330 #: src/libslic3r/PrintConfig.cpp:2339 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:915 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:918 src/libslic3r/PrintConfig.cpp:217 #: src/libslic3r/PrintConfig.cpp:226 msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:918 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:920 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:920 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:922 src/libslic3r/PrintConfig.cpp:1815 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:922 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:924 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:924 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:926 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:926 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:939 msgid "&New Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:939 msgid "Start a new project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:942 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:942 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:947 msgid "Recent projects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:956 msgid "" "The selected project is no longer available.\n" "Do you want to remove it from the recent projects list?" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:956 src/slic3r/GUI/MainFrame.cpp:1335 #: src/slic3r/GUI/PrintHostDialogs.cpp:259 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:981 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:981 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:985 src/slic3r/GUI/MainFrame.cpp:987 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:985 src/slic3r/GUI/MainFrame.cpp:987 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:995 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:995 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:999 msgid "Import STL (imperial units)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:999 msgid "Load an model saved with imperial units" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1003 msgid "Import SL1 archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1003 msgid "Load an SL1 archive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1008 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1008 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1011 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1011 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1015 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1015 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1018 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1021 src/slic3r/GUI/MainFrame.cpp:1297 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1021 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1025 src/slic3r/GUI/MainFrame.cpp:1298 msgid "S&end G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1025 msgid "Send to print current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1029 msgid "Export G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1029 msgid "Export current plate as G-code to SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1033 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1033 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1036 msgid "Export plate as STL &including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1036 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1039 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1039 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1043 src/slic3r/GUI/MainFrame.cpp:1249 msgid "Export &toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1043 src/slic3r/GUI/MainFrame.cpp:1249 msgid "Export toolpaths as OBJ" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1047 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1047 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1050 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1050 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1053 msgid "Export Config Bundle With Physical Printers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1053 msgid "Export all presets including physical printers to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1056 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 msgid "Ejec&t SD card / Flash drive" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1058 msgid "Eject SD card / Flash drive after the G-code was exported to it." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1066 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1066 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1072 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1072 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1078 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1078 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1086 msgid "(Re)Slice No&w" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1086 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1090 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1090 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1094 msgid "&G-code preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1097 src/slic3r/GUI/MainFrame.cpp:1256 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1097 src/slic3r/GUI/MainFrame.cpp:1256 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1112 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1113 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1115 msgid "D&eselect all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1116 msgid "Deselects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1119 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1120 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1122 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1123 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1127 msgid "&Undo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1130 msgid "&Redo" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1135 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1136 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1138 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1139 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1143 src/slic3r/GUI/MainFrame.cpp:1245 msgid "Re&load from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1144 src/slic3r/GUI/MainFrame.cpp:1246 msgid "Reload the plater from disk" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1148 msgid "Searc&h" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1149 msgid "Search in settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1157 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1157 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1162 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1162 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1165 src/slic3r/GUI/MainFrame.cpp:1300 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1165 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1169 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1169 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1175 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1175 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1178 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1178 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1184 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1184 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1199 msgid "Show &labels" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1199 msgid "Show object/instance labels in 3D scene" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1202 msgid "&Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1202 src/slic3r/GUI/Plater.cpp:2234 msgid "Collapse sidebar" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1214 src/slic3r/GUI/MainFrame.cpp:1271 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1215 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1216 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1217 src/slic3r/GUI/MainFrame.cpp:1272 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1220 src/slic3r/GUI/MainFrame.cpp:1275 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1242 msgid "&Open G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1242 msgid "Open a G-code file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1252 msgid "Open &PrusaSlicer" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1297 msgid "E&xport" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1298 msgid "S&end to print" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1300 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1323 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1334 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1340 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1340 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1341 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1376 #, possible-c-format msgid "Save %s file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1376 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1376 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1388 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1397 src/slic3r/GUI/Plater.cpp:2994 #: src/slic3r/GUI/Plater.cpp:5517 src/slic3r/GUI/Tab.cpp:1577 #: src/slic3r/GUI/Tab.cpp:4106 msgid "Slicing" msgstr "" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1399 #, possible-c-format msgid "Processing %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1422 msgid "%1% was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1424 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1439 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1449 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1461 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1461 src/libslic3r/PrintConfig.cpp:3702 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1475 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1494 src/slic3r/GUI/MainFrame.cpp:1556 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1530 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:1577 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:462 msgid "3Dconnexion settings" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:473 msgid "Device:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:478 msgid "Speed:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:481 #: src/slic3r/GUI/Mouse3DController.cpp:502 msgid "Translation" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:493 #: src/slic3r/GUI/Mouse3DController.cpp:502 msgid "Zoom" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:499 msgid "Deadzone:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:514 msgid "Options:" msgstr "" #: src/slic3r/GUI/Mouse3DController.cpp:517 msgid "Swap Y/Z axes" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:70 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:71 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:398 msgid "3D Mouse disconnected." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:401 msgid "Configuration update is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:401 msgid "See more." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:403 msgid "New version is available." msgstr "" #: src/slic3r/GUI/NotificationManager.hpp:403 msgid "See Releases page." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:387 #: src/slic3r/GUI/NotificationManager.cpp:397 msgid "More" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:690 #: src/slic3r/GUI/NotificationManager.cpp:961 msgid "Export G-Code." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:734 msgid "Open Folder." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:772 msgid "Eject drive" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:880 #: src/slic3r/GUI/NotificationManager.cpp:896 #: src/slic3r/GUI/NotificationManager.cpp:907 msgid "ERROR:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:885 #: src/slic3r/GUI/NotificationManager.cpp:900 #: src/slic3r/GUI/NotificationManager.cpp:915 msgid "WARNING:" msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:964 msgid "Slicing finished." msgstr "" #: src/slic3r/GUI/NotificationManager.cpp:1007 msgid "Exporting finished." msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:58 msgid "Instances" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:62 #: src/slic3r/GUI/ObjectDataViewModel.cpp:225 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3953 #: src/slic3r/GUI/Tab.cpp:4035 msgid "Layers" msgstr "" #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 msgid "Range" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:259 #, possible-c-format msgid "" "PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n" "while OpenGL version %s, render %s, vendor %s was detected." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:262 msgid "You may need to update your graphics card driver." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:265 msgid "" "As a workaround, you may run PrusaSlicer with a software rendered 3D " "graphics by running prusa-slicer.exe with the --sw_renderer parameter." msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:267 msgid "Unsupported OpenGL version" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:275 #, possible-c-format msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" #: src/slic3r/GUI/OpenGLManager.cpp:276 msgid "Error loading shaders" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:333 msgctxt "Layers" msgid "Top" msgstr "" #: src/slic3r/GUI/OptionsGroup.cpp:333 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:51 msgid "Delete this preset from this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:81 msgid "This printer will be shown in the presets list as" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:155 msgid "Physical Printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:161 msgid "Type here the name of your printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:172 msgid "Descriptive name for the printer" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176 msgid "Add preset for this printer device" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 src/slic3r/GUI/Tab.cpp:2065 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:260 msgid "Connection to printers connected via the print host failed." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:302 msgid "Test" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:307 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:319 msgid "Success!" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:329 msgid "Refresh Printers" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:356 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:366 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:395 #: src/libslic3r/PrintConfig.cpp:122 msgid "HTTPS CA File" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:396 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:397 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:543 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:547 msgid "You should to change a name of your printer device. It can't be saved." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:555 msgid "Printer with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:556 msgid "Replace?" msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:579 msgid "" "Following printer preset(s) is duplicated:%1%The above preset for printer " "\"%2%\" will be used just once." msgstr "" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:625 msgid "It's not possible to delete the last related preset for the printer." msgstr "" #: src/slic3r/GUI/Plater.cpp:163 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:164 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:165 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:168 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:218 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1151 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1163 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1170 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:240 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:241 msgid "Cost (money)" msgstr "" #: src/slic3r/GUI/Plater.cpp:243 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:360 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:2098 #: src/libslic3r/PrintConfig.cpp:2893 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:489 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:364 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:396 src/slic3r/GUI/Tab.cpp:1471 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:398 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:406 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:503 msgid "Select what kind of pad do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:505 msgid "Below object" msgstr "" #: src/slic3r/GUI/Plater.cpp:506 msgid "Around object" msgstr "" #: src/slic3r/GUI/Plater.cpp:695 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:756 src/slic3r/GUI/Plater.cpp:5986 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:771 src/slic3r/GUI/Plater.cpp:2994 #: src/slic3r/GUI/Plater.cpp:5520 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:926 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:1071 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1076 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1079 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:1089 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1110 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1113 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1113 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1151 msgid "Used Filament (in)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1206 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1206 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1163 msgid "Used Filament (in³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1189 msgid "Filament at extruder %1%" msgstr "" #: src/slic3r/GUI/Plater.cpp:1195 msgid "(including spool)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1204 src/libslic3r/PrintConfig.cpp:807 #: src/libslic3r/PrintConfig.cpp:2708 src/libslic3r/PrintConfig.cpp:2709 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:1222 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1232 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1400 src/slic3r/GUI/Plater.cpp:4859 #, possible-c-format msgid "%s - Drop project file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1407 src/slic3r/GUI/Plater.cpp:4866 msgid "Open as project" msgstr "" #: src/slic3r/GUI/Plater.cpp:1408 src/slic3r/GUI/Plater.cpp:4867 msgid "Import geometry only" msgstr "" #: src/slic3r/GUI/Plater.cpp:1409 src/slic3r/GUI/Plater.cpp:4868 msgid "Import config only" msgstr "" #: src/slic3r/GUI/Plater.cpp:1412 src/slic3r/GUI/Plater.cpp:4871 msgid "Select an action to apply to the file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1413 src/slic3r/GUI/Plater.cpp:4872 msgid "Action" msgstr "" #: src/slic3r/GUI/Plater.cpp:1421 src/slic3r/GUI/Plater.cpp:4880 msgid "Don't show again" msgstr "" #: src/slic3r/GUI/Plater.cpp:1466 src/slic3r/GUI/Plater.cpp:4917 msgid "You can open only one .gcode file at a time." msgstr "" #: src/slic3r/GUI/Plater.cpp:1467 src/slic3r/GUI/Plater.cpp:4918 msgid "Drag and drop G-code file" msgstr "" #: src/slic3r/GUI/Plater.cpp:1521 src/slic3r/GUI/Plater.cpp:4731 #: src/slic3r/GUI/Plater.cpp:4972 msgid "Import Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:1543 src/slic3r/GUI/Plater.cpp:4994 msgid "Load File" msgstr "" #: src/slic3r/GUI/Plater.cpp:1548 src/slic3r/GUI/Plater.cpp:4999 msgid "Load Files" msgstr "" #: src/slic3r/GUI/Plater.cpp:1651 msgid "Fill bed" msgstr "" #: src/slic3r/GUI/Plater.cpp:1657 msgid "Optimize Rotation" msgstr "" #: src/slic3r/GUI/Plater.cpp:1663 msgid "Import SLA archive" msgstr "" #: src/slic3r/GUI/Plater.cpp:2118 #, possible-c-format msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" #: src/slic3r/GUI/Plater.cpp:2121 #, possible-c-format msgid "Ejecting of device %s(%s) has failed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2140 msgid "New Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2233 msgid "Expand sidebar" msgstr "" #: src/slic3r/GUI/Plater.cpp:2306 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:2316 msgid "Loading file" msgstr "" #: src/slic3r/GUI/Plater.cpp:2400 #, possible-c-format msgid "" "Some object(s) in file %s looks like saved in inches.\n" "Should I consider them as a saved in inches and convert them?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2402 msgid "The object appears to be saved in inches" msgstr "" #: src/slic3r/GUI/Plater.cpp:2410 msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2413 src/slic3r/GUI/Plater.cpp:2466 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:2420 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2421 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2443 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:2463 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2479 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:2581 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:2582 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:2644 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2651 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2657 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2663 msgid "Export OBJ file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2759 msgid "Delete Object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2770 msgid "Reset Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:2842 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2853 msgid "Split to Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:2978 src/slic3r/GUI/Plater.cpp:3662 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2988 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:3026 src/slic3r/GUI/PrintHostDialogs.cpp:260 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:3045 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:3162 msgid "Please select the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3197 msgid "It is not allowed to change the file to reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3197 msgid "Do you want to retry" msgstr "" #: src/slic3r/GUI/Plater.cpp:3215 msgid "Reload from:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3306 msgid "Unable to reload:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3311 msgid "Error during reload" msgstr "" #: src/slic3r/GUI/Plater.cpp:3330 msgid "Reload all from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3351 msgid "Fix Throught NetFabb" msgstr "" #: src/slic3r/GUI/Plater.cpp:3619 msgid "There are active warnings concerning sliced models:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3630 msgid "generated warnings" msgstr "" #: src/slic3r/GUI/Plater.cpp:3670 src/slic3r/GUI/PrintHostDialogs.cpp:261 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:3932 src/slic3r/GUI/Plater.cpp:3956 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3941 msgid "Add one more instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3943 msgid "Remove one instance of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3945 msgid "Set number of instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:3945 msgid "Change the number of instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3947 msgid "Fill bed with instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:3947 msgid "Fill the remaining area of bed with instances of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3966 msgid "Reload the selected object from disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:3969 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:4000 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4000 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4002 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4002 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4004 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4004 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:4007 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:4007 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4019 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4019 src/slic3r/GUI/Plater.cpp:4039 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4021 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4021 src/slic3r/GUI/Plater.cpp:4057 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:4024 src/slic3r/GUI/Plater.cpp:4039 #: src/slic3r/GUI/Plater.cpp:4057 src/libslic3r/PrintConfig.cpp:3726 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:4024 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:4046 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:4047 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:4127 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:4499 msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" #: src/slic3r/GUI/Plater.cpp:4703 msgid "Load Project" msgstr "" #: src/slic3r/GUI/Plater.cpp:4735 msgid "Import Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:4804 msgid "The selected file" msgstr "" #: src/slic3r/GUI/Plater.cpp:4804 msgid "does not contain valid gcode." msgstr "" #: src/slic3r/GUI/Plater.cpp:4805 msgid "Error while loading .gcode file" msgstr "" #: src/slic3r/GUI/Plater.cpp:5043 msgid "All objects will be removed, continue?" msgstr "" #: src/slic3r/GUI/Plater.cpp:5051 msgid "Delete Selected Objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:5059 msgid "Increase Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5093 msgid "Decrease Instances" msgstr "" #: src/slic3r/GUI/Plater.cpp:5124 msgid "Enter the number of copies:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5125 msgid "Copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:5129 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "" #: src/slic3r/GUI/Plater.cpp:5195 msgid "Cut by Plane" msgstr "" #: src/slic3r/GUI/Plater.cpp:5252 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5252 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:5399 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5416 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5419 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5448 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5453 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:5985 msgid "Export" msgstr "" #: src/slic3r/GUI/Plater.cpp:6080 msgid "Paste From Clipboard" msgstr "" #: src/slic3r/GUI/Preferences.cpp:24 src/slic3r/GUI/Tab.cpp:2099 #: src/slic3r/GUI/Tab.cpp:2281 src/slic3r/GUI/Tab.cpp:2389 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1072 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:48 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:50 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:56 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:58 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:64 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:66 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:75 msgid "" "If enabled, PrusaSlicer will check for the new versions of itself online. " "When a new version becomes available a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/Preferences.cpp:81 msgid "Export sources full pathnames to 3mf and amf" msgstr "" #: src/slic3r/GUI/Preferences.cpp:83 msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" #: src/slic3r/GUI/Preferences.cpp:93 msgid "If enabled, sets PrusaSlicer as default application to open .3mf files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:100 msgid "If enabled, sets PrusaSlicer as default application to open .stl files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:110 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:115 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:117 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:123 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:125 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:131 msgid "Show drop project dialog" msgstr "" #: src/slic3r/GUI/Preferences.cpp:133 msgid "" "When checked, whenever dragging and dropping a project file on the " "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" #: src/slic3r/GUI/Preferences.cpp:138 src/libslic3r/PrintConfig.cpp:3753 msgid "Single instance mode" msgstr "" #: src/slic3r/GUI/Preferences.cpp:141 msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" #: src/slic3r/GUI/Preferences.cpp:143 msgid "" "If this is enabled, when starting PrusaSlicer and another instance of the " "same PrusaSlicer is already running, that instance will be reactivated " "instead." msgstr "" #: src/slic3r/GUI/Preferences.cpp:160 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:665 msgid "Ask for unsaved changes when closing application" msgstr "" #: src/slic3r/GUI/Preferences.cpp:162 msgid "When closing the application, always ask for unsaved changes" msgstr "" #: src/slic3r/GUI/Preferences.cpp:167 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:666 msgid "Ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:169 msgid "Always ask for unsaved changes when selecting new preset" msgstr "" #: src/slic3r/GUI/Preferences.cpp:177 msgid "Associate .gcode files to PrusaSlicer G-code Viewer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:179 msgid "" "If enabled, sets PrusaSlicer G-code Viewer as default application to open ." "gcode files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:188 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:190 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:198 src/slic3r/GUI/Preferences.cpp:200 msgid "Show splash screen" msgstr "" #: src/slic3r/GUI/Preferences.cpp:207 msgid "Enable support for legacy 3DConnexion devices" msgstr "" #: src/slic3r/GUI/Preferences.cpp:209 msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" #: src/slic3r/GUI/Preferences.cpp:218 msgid "Camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:224 msgid "Use perspective camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:226 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:231 msgid "Use free camera" msgstr "" #: src/slic3r/GUI/Preferences.cpp:233 msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" #: src/slic3r/GUI/Preferences.cpp:238 msgid "Reverse direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:240 msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "" #: src/slic3r/GUI/Preferences.cpp:247 msgid "GUI" msgstr "" #: src/slic3r/GUI/Preferences.cpp:262 msgid "Show sidebar collapse/expand button" msgstr "" #: src/slic3r/GUI/Preferences.cpp:264 msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:269 msgid "Use custom size for toolbar icons" msgstr "" #: src/slic3r/GUI/Preferences.cpp:271 msgid "If enabled, you can change size of toolbar icons manually." msgstr "" #: src/slic3r/GUI/Preferences.cpp:276 msgid "Suppress to open hyperlink in browser" msgstr "" #: src/slic3r/GUI/Preferences.cpp:278 msgid "" "If enabled, the descriptions of configuration parameters in settings tabs " "woldn't work as hyperlinks. If disabled, the descriptions of configuration " "parameters in settings tabs will work as hyperlinks." msgstr "" #: src/slic3r/GUI/Preferences.cpp:285 msgid "Sequential slider applied only to top layer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:287 msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer. If disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" #: src/slic3r/GUI/Preferences.cpp:304 msgid "Render" msgstr "" #: src/slic3r/GUI/Preferences.cpp:310 msgid "Use environment map" msgstr "" #: src/slic3r/GUI/Preferences.cpp:312 msgid "If enabled, renders object using the environment map." msgstr "" #: src/slic3r/GUI/Preferences.cpp:345 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preferences.cpp:420 msgid "Icon size in a respect to the default size" msgstr "" #: src/slic3r/GUI/Preferences.cpp:435 msgid "Select toolbar icon size in respect to the default one." msgstr "" #: src/slic3r/GUI/Preferences.cpp:466 msgid "Old regular layout with the tab bar" msgstr "" #: src/slic3r/GUI/Preferences.cpp:467 msgid "New layout, access via settings button in the top menu" msgstr "" #: src/slic3r/GUI/Preferences.cpp:468 msgid "Settings in non-modal window" msgstr "" #: src/slic3r/GUI/Preferences.cpp:477 msgid "Layout Options" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:197 #: src/slic3r/GUI/PresetComboBoxes.cpp:235 #: src/slic3r/GUI/PresetComboBoxes.cpp:761 #: src/slic3r/GUI/PresetComboBoxes.cpp:811 #: src/slic3r/GUI/PresetComboBoxes.cpp:925 #: src/slic3r/GUI/PresetComboBoxes.cpp:969 msgid "System presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:239 #: src/slic3r/GUI/PresetComboBoxes.cpp:815 #: src/slic3r/GUI/PresetComboBoxes.cpp:973 msgid "User presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:250 msgid "Incompatible presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:285 msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:287 msgid "Delete Physical Printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:624 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:680 #: src/slic3r/GUI/PresetComboBoxes.cpp:710 msgid "Add/Remove presets" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:685 #: src/slic3r/GUI/PresetComboBoxes.cpp:715 src/slic3r/GUI/Tab.cpp:2986 msgid "Add physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:699 msgid "Edit preset" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:703 src/slic3r/GUI/Tab.cpp:2986 msgid "Edit physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:706 msgid "Delete physical printer" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:826 #: src/slic3r/GUI/PresetComboBoxes.cpp:987 msgid "Physical printers" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:850 msgid "Add/Remove filaments" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:852 msgid "Add/Remove materials" msgstr "" #: src/slic3r/GUI/PresetComboBoxes.cpp:854 #: src/slic3r/GUI/PresetComboBoxes.cpp:1011 msgid "Add/Remove printers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:28 msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " "(however, speed will never be reduced below %4%mm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:35 msgid "" "If estimated layer time is greater, but still below ~%1%s, fan will run at a " "proportionally decreasing speed between %2%%% and %3%%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:39 msgid "During the other layers, fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:41 msgid "Fan" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:47 msgid "will always run at %1%%%" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:50 msgid "except for the first %1% layers." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:52 msgid "except for the first layer." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:54 msgid "will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:155 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:164 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:173 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:183 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:191 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:202 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:212 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:218 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:219 msgid "flow rate is maximized" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:223 msgid "when printing" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:224 msgid "with a volumetric rate" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:228 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:246 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:262 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:269 #, possible-c-format msgid "%d lines: %.2f mm" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:273 msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:302 msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:315 msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:318 msgid "Minimum top shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:321 msgid "Top is open." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:334 msgid "Bottom shell is %1% mm thick for layer height %2% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:337 msgid "Minimum bottom shell thickness is %1% mm." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:340 msgid "Bottom is open." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:34 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:34 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:36 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:44 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:57 msgid "Group" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:174 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:175 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:176 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:177 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:178 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:179 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:182 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:184 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:226 #: src/slic3r/GUI/PrintHostDialogs.cpp:257 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:258 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:262 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:300 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83 #: src/libslic3r/PrintConfig.cpp:691 src/libslic3r/PrintConfig.cpp:735 #: src/libslic3r/PrintConfig.cpp:750 src/libslic3r/PrintConfig.cpp:2606 #: src/libslic3r/PrintConfig.cpp:2615 src/libslic3r/PrintConfig.cpp:2725 #: src/libslic3r/PrintConfig.cpp:2733 src/libslic3r/PrintConfig.cpp:2741 #: src/libslic3r/PrintConfig.cpp:2748 src/libslic3r/PrintConfig.cpp:2756 #: src/libslic3r/PrintConfig.cpp:2764 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:648 #: src/libslic3r/PrintConfig.cpp:1432 msgid "mm³/s" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:57 #, possible-c-format msgid "Save %s as:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:110 msgid "the following suffix is not allowed:" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:116 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:122 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:127 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:134 msgid "Preset with name \"%1%\" already exists." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:136 msgid "" "Preset with name \"%1%\" already exists and is incopatible with selected " "printer." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:137 msgid "Note: This preset will be replaced after saving" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:142 msgid "The name cannot be empty." msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:176 #: src/slic3r/GUI/SavePresetDialog.cpp:182 msgid "Save preset" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:205 msgctxt "PresetName" msgid "Copy" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:263 msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:296 msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:299 msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:300 msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" #: src/slic3r/GUI/SavePresetDialog.cpp:301 msgid "Just switch to \"%1%\" preset" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2417 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2411 msgid "Normal" msgstr "" #: src/slic3r/GUI/Selection.cpp:172 msgid "Selection-Add" msgstr "" #: src/slic3r/GUI/Selection.cpp:213 msgid "Selection-Remove" msgstr "" #: src/slic3r/GUI/Selection.cpp:245 msgid "Selection-Add Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:264 msgid "Selection-Remove Object" msgstr "" #: src/slic3r/GUI/Selection.cpp:282 msgid "Selection-Add Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:301 msgid "Selection-Remove Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:402 msgid "Selection-Add All" msgstr "" #: src/slic3r/GUI/Selection.cpp:428 msgid "Selection-Remove All" msgstr "" #: src/slic3r/GUI/Selection.cpp:987 msgid "Scale To Fit" msgstr "" #: src/slic3r/GUI/Selection.cpp:1514 msgid "Set Printable Instance" msgstr "" #: src/slic3r/GUI/Selection.cpp:1514 msgid "Set Unprintable Instance" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:82 msgid "System Information" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:158 msgid "Copy to Clipboard" msgstr "" #: src/slic3r/GUI/Tab.cpp:112 src/libslic3r/PrintConfig.cpp:308 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:113 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:118 src/libslic3r/PrintConfig.cpp:323 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:119 msgid "Select the print profiles this profile is compatible with." msgstr "" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:214 #, possible-c-format msgid "Save current %s" msgstr "" #: src/slic3r/GUI/Tab.cpp:215 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:219 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:223 msgid "Search in settings [%1%]" msgstr "" #: src/slic3r/GUI/Tab.cpp:1240 msgid "Detach from system preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1253 msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1254 msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1257 msgid "Modifications to the current profile will be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:1260 msgid "" "This action is not revertable.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1262 msgid "Detach preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:1288 msgid "This is a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1290 msgid "This is a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1292 msgid "Current preset is inherited from the default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1296 msgid "Current preset is inherited from" msgstr "" #: src/slic3r/GUI/Tab.cpp:1300 msgid "It can't be deleted or modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:1301 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" #: src/slic3r/GUI/Tab.cpp:1302 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:1306 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:1312 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:1320 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1323 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1337 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1341 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:1349 msgid "full profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1350 msgid "symbolic profile name" msgstr "" #: src/slic3r/GUI/Tab.cpp:1388 src/slic3r/GUI/Tab.cpp:4033 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1394 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1406 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1407 src/libslic3r/PrintConfig.cpp:1950 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1412 msgid "Minimum shell thickness" msgstr "" #: src/slic3r/GUI/Tab.cpp:1423 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1450 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1462 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1482 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1486 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1501 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1514 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1517 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1520 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1527 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1535 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1543 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1561 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1571 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1574 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1583 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1586 src/slic3r/GUI/Tab.cpp:4109 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1587 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1589 msgid "Extruder clearance" msgstr "" #: src/slic3r/GUI/Tab.cpp:1594 src/slic3r/GUI/Tab.cpp:4110 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1601 src/libslic3r/PrintConfig.cpp:1636 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1607 src/slic3r/GUI/Tab.cpp:1608 #: src/slic3r/GUI/Tab.cpp:1928 src/slic3r/GUI/Tab.cpp:1929 #: src/slic3r/GUI/Tab.cpp:2262 src/slic3r/GUI/Tab.cpp:2263 #: src/slic3r/GUI/Tab.cpp:2338 src/slic3r/GUI/Tab.cpp:2339 #: src/slic3r/GUI/Tab.cpp:3976 src/slic3r/GUI/Tab.cpp:3977 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1614 src/slic3r/GUI/Tab.cpp:1936 #: src/slic3r/GUI/Tab.cpp:2269 src/slic3r/GUI/Tab.cpp:2345 #: src/slic3r/GUI/Tab.cpp:3984 src/slic3r/GUI/Tab.cpp:4115 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1615 src/slic3r/GUI/Tab.cpp:1937 #: src/slic3r/GUI/Tab.cpp:2270 src/slic3r/GUI/Tab.cpp:2346 #: src/slic3r/GUI/Tab.cpp:3985 src/slic3r/GUI/Tab.cpp:4116 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1695 msgid "Filament Overrides" msgstr "" #: src/slic3r/GUI/Tab.cpp:1817 msgid "Temperature" msgstr "" #: src/slic3r/GUI/Tab.cpp:1818 msgid "Nozzle" msgstr "" #: src/slic3r/GUI/Tab.cpp:1823 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1828 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1830 src/libslic3r/PrintConfig.cpp:1539 #: src/libslic3r/PrintConfig.cpp:2398 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1841 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1851 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1857 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1864 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1874 msgid "Wipe tower parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:1877 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1890 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1913 src/slic3r/GUI/Tab.cpp:2201 #: src/libslic3r/PrintConfig.cpp:2033 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1914 src/slic3r/GUI/Tab.cpp:2202 #: src/libslic3r/PrintConfig.cpp:1983 src/libslic3r/PrintConfig.cpp:1998 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1921 src/slic3r/GUI/Tab.cpp:2209 #: src/libslic3r/PrintConfig.cpp:428 src/libslic3r/PrintConfig.cpp:438 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1971 msgid "Volumetric flow hints not available" msgstr "" #: src/slic3r/GUI/Tab.cpp:2067 msgid "" "Note: All parameters from this group are moved to the Physical Printer " "settings (see changelog).\n" "\n" "A new Physical Printer profile is created by clicking on the \"cog\" icon " "right of the Printer profiles combo box, by selecting the \"Add physical " "printer\" item in the Printer combo box. The Physical Printer profile editor " "opens also when clicking on the \"cog\" icon in the Printer settings tab. " "The Physical Printer profiles are being stored into PrusaSlicer/" "physical_printer directory." msgstr "" #: src/slic3r/GUI/Tab.cpp:2100 src/slic3r/GUI/Tab.cpp:2282 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2109 src/slic3r/GUI/UnsavedChangesDialog.cpp:1072 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:2114 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:2142 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2145 src/slic3r/GUI/Tab.cpp:2548 #: src/libslic3r/PrintConfig.cpp:1508 msgid "Nozzle diameter" msgstr "" #: src/slic3r/GUI/Tab.cpp:2216 src/libslic3r/PrintConfig.cpp:196 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2223 src/libslic3r/PrintConfig.cpp:1247 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2230 src/libslic3r/PrintConfig.cpp:2291 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2237 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2244 msgid "Color Change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2250 src/libslic3r/PrintConfig.cpp:2024 msgid "Pause Print G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2256 msgid "Template Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:2289 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2304 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2305 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2311 src/slic3r/GUI/Tab.cpp:3960 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2328 src/slic3r/GUI/Tab.cpp:3956 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:2387 src/slic3r/GUI/Tab.cpp:2481 #: src/libslic3r/PrintConfig.cpp:1276 src/libslic3r/PrintConfig.cpp:1311 #: src/libslic3r/PrintConfig.cpp:1328 src/libslic3r/PrintConfig.cpp:1345 #: src/libslic3r/PrintConfig.cpp:1361 src/libslic3r/PrintConfig.cpp:1371 #: src/libslic3r/PrintConfig.cpp:1381 src/libslic3r/PrintConfig.cpp:1391 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2410 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2416 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2425 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2430 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2437 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2442 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2506 src/slic3r/GUI/Tab.cpp:2514 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2515 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2546 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2570 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2575 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2581 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2594 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2601 msgid "Reset to Filament Color" msgstr "" #: src/slic3r/GUI/Tab.cpp:2779 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2781 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:3367 msgid "Detached" msgstr "" #: src/slic3r/GUI/Tab.cpp:3430 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:3430 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:3439 msgid "It's a last preset for this physical printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:3444 msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" msgstr "" #: src/slic3r/GUI/Tab.cpp:3456 msgid "" "The physical printer(s) below is based on the preset, you are going to " "delete." msgstr "" #: src/slic3r/GUI/Tab.cpp:3460 msgid "" "Note, that selected preset will be deleted from this/those printer(s) too." msgstr "" #: src/slic3r/GUI/Tab.cpp:3464 msgid "" "The physical printer(s) below is based only on the preset, you are going to " "delete." msgstr "" #: src/slic3r/GUI/Tab.cpp:3468 msgid "" "Note, that this/those printer(s) will be deleted after deleting of the " "selected preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3472 msgid "Are you sure you want to %1% the selected preset?" msgstr "" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3477 msgid "%1% Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3558 src/slic3r/GUI/Tab.cpp:3630 msgid "Set" msgstr "" #: src/slic3r/GUI/Tab.cpp:3694 msgid "" "Machine limits will be emitted to G-code and used to estimate print time." msgstr "" #: src/slic3r/GUI/Tab.cpp:3697 msgid "" "Machine limits will NOT be emitted to G-code, however they will be used to " "estimate print time, which may therefore not be accurate as the printer may " "apply a different set of machine limits." msgstr "" #: src/slic3r/GUI/Tab.cpp:3701 msgid "" "Machine limits are not set, therefore the print time estimate may not be " "accurate." msgstr "" #: src/slic3r/GUI/Tab.cpp:3723 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3725 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3727 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3729 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3734 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3736 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3739 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3741 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3751 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3753 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3756 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3759 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3761 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3767 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3768 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3774 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3775 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3919 src/slic3r/GUI/Tab.cpp:3921 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:4043 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:4048 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:4071 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:4076 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4150 msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" #: src/slic3r/GUI/Tab.cpp:4152 src/libslic3r/PrintConfig.cpp:2972 msgid "Object elevation" msgstr "" #: src/slic3r/GUI/Tab.cpp:4152 src/libslic3r/PrintConfig.cpp:3074 msgid "Pad around object" msgstr "" #: src/slic3r/GUI/Tab.hpp:374 src/slic3r/GUI/Tab.hpp:496 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:405 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:446 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:480 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:143 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:152 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:851 msgid "Undef" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:531 msgid "PrusaSlicer is closing: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:548 msgid "Switching Presets: Unsaved Changes" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:614 msgid "Old Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:615 msgid "New Value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:646 msgid "Transfer" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:647 msgid "Discard" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:648 msgid "Save" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:668 msgid "PrusaSlicer will remember your action." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:670 msgid "" "You will not be asked about the unsaved changes the next time you close " "PrusaSlicer." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:671 msgid "" "You will not be asked about the unsaved changes the next time you switch a " "preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:672 msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:674 msgid "PrusaSlicer: Don't ask me again" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:741 msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:743 msgid "All settings changes will be discarded." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:746 msgid "Save the selected options." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:746 msgid "Transfer the selected settings to the newly selected preset." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:750 msgid "Save the selected options to preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:751 msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1010 msgid "The following presets were modified:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1015 msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1019 msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1020 msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067 msgid "Extruders count" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1183 msgid "Old value" msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1184 msgid "New value" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125 #: src/slic3r/GUI/UpdateDialogs.cpp:183 msgid "Open changelog page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173 msgid "Comment:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 msgid "You must install a configuration update." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 #, possible-c-format msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:216 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:249 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:270 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:287 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "Configuration updates" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:304 msgid "No updates available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:309 #, possible-c-format msgid "%s has no configuration updates available." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:15 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:41 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:83 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:85 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:89 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:91 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:142 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:254 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:255 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:263 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:264 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:276 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:285 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:286 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:365 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:627 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:628 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:84 msgid "Connection to AstroBox works correctly." msgstr "" #: src/slic3r/Utils/AstroBox.cpp:90 msgid "Could not connect to AstroBox" msgstr "" #: src/slic3r/Utils/AstroBox.cpp:92 msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:145 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:148 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed:" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:58 msgid "Upload not enabled on FlashAir card." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:68 msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" #: src/slic3r/Utils/FlashAir.cpp:74 msgid "Could not connect to FlashAir" msgstr "" #: src/slic3r/Utils/FlashAir.cpp:76 msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:83 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:89 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:91 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:185 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:191 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:727 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:731 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:734 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/Http.cpp:73 msgid "" "Could not detect system SSL certificate store. PrusaSlicer will be unable to " "establish secure network connections." msgstr "" #: src/slic3r/Utils/Http.cpp:78 msgid "PrusaSlicer detected system SSL certificate store in: %1%" msgstr "" #: src/slic3r/Utils/Http.cpp:82 msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" #: src/slic3r/Utils/Http.cpp:91 msgid "" "CURL init has failed. PrusaSlicer will be unable to establish network " "connections. See logs for additional details." msgstr "" #: src/slic3r/Utils/Process.cpp:151 msgid "Open G-code file:" msgstr "" #: src/libslic3r/GCode.cpp:612 msgid "There is an object with no extrusions on the first layer." msgstr "" #: src/libslic3r/GCode.cpp:630 msgid "Empty layers detected, the output would not be printable." msgstr "" #: src/libslic3r/GCode.cpp:631 msgid "Print z" msgstr "" #: src/libslic3r/GCode.cpp:632 msgid "" "This is usually caused by negligibly small extrusions or by a faulty model. " "Try to repair the model or change its orientation on the bed." msgstr "" #: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:360 msgid "Mixed" msgstr "" #: src/libslic3r/Flow.cpp:61 msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" #: src/libslic3r/Format/3mf.cpp:1667 msgid "" "The selected 3mf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/Format/AMF.cpp:955 msgid "" "The selected amf file has been saved with a newer version of %1% and is not " "compatible." msgstr "" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "" #: src/libslic3r/Preset.cpp:1258 msgid "filament" msgstr "" #: src/libslic3r/Print.cpp:1247 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1250 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1254 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1256 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1265 msgid "The Spiral Vase option can only be used when printing a single object." msgstr "" #: src/libslic3r/Print.cpp:1272 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1285 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" #: src/libslic3r/Print.cpp:1291 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, " "RepRapFirmware and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1293 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1295 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" #: src/libslic3r/Print.cpp:1297 msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" #: src/libslic3r/Print.cpp:1299 msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" #: src/libslic3r/Print.cpp:1320 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1322 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1324 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1326 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1368 msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" #: src/libslic3r/Print.cpp:1394 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1403 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1406 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "" #: src/libslic3r/Print.cpp:1417 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1425 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1429 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1451 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1456 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1615 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1641 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1650 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1673 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1677 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLA/Pad.cpp:532 msgid "Pad brim size is too small for the current configuration." msgstr "" #: src/libslic3r/SLAPrint.cpp:628 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:640 msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" #: src/libslic3r/SLAPrint.cpp:646 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" #: src/libslic3r/SLAPrint.cpp:661 msgid "Exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:668 msgid "Initial exposition time is out of printer profile bounds." msgstr "" #: src/libslic3r/SLAPrint.cpp:784 msgid "Slicing done" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:44 msgid "Hollowing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:45 msgid "Drilling holes into model." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:359 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:48 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:65 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:192 msgid "Too many overlapping holes." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:201 msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:247 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:411 src/libslic3r/SLAPrintSteps.cpp:420 #: src/libslic3r/SLAPrintSteps.cpp:459 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:451 msgid "No pad can be generated for this model with the current configuration" msgstr "" #: src/libslic3r/SLAPrintSteps.cpp:619 msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" #: src/libslic3r/PrintBase.cpp:72 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:56 msgid "Bed custom texture" msgstr "" #: src/libslic3r/PrintConfig.cpp:61 msgid "Bed custom model" msgstr "" #: src/libslic3r/PrintConfig.cpp:66 msgid "Picture sizes to be stored into a .gcode and .sl1 files" msgstr "" #: src/libslic3r/PrintConfig.cpp:73 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:80 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:81 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:89 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:91 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:99 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:100 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" #: src/libslic3r/PrintConfig.cpp:108 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:109 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:116 msgid "Name of the printer" msgstr "" #: src/libslic3r/PrintConfig.cpp:123 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:129 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:131 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:147 msgid "Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:153 msgid "Printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:154 msgid "Related printer preset name" msgstr "" #: src/libslic3r/PrintConfig.cpp:159 msgid "Authorization Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:164 msgid "API key" msgstr "" #: src/libslic3r/PrintConfig.cpp:165 msgid "HTTP digest" msgstr "" #: src/libslic3r/PrintConfig.cpp:178 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:179 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:186 src/libslic3r/PrintConfig.cpp:2261 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:187 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:190 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:197 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:207 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:208 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:219 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:220 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:228 msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" #: src/libslic3r/PrintConfig.cpp:230 msgid "Minimum bottom shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:236 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:237 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:239 src/libslic3r/PrintConfig.cpp:382 #: src/libslic3r/PrintConfig.cpp:925 src/libslic3r/PrintConfig.cpp:1053 #: src/libslic3r/PrintConfig.cpp:1334 src/libslic3r/PrintConfig.cpp:1383 #: src/libslic3r/PrintConfig.cpp:1393 src/libslic3r/PrintConfig.cpp:1586 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:245 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:247 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:250 src/libslic3r/PrintConfig.cpp:837 #: src/libslic3r/PrintConfig.cpp:1823 src/libslic3r/PrintConfig.cpp:1833 #: src/libslic3r/PrintConfig.cpp:2091 src/libslic3r/PrintConfig.cpp:2246 #: src/libslic3r/PrintConfig.cpp:2445 src/libslic3r/PrintConfig.cpp:2946 #: src/libslic3r/PrintConfig.cpp:3067 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:256 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:257 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:258 src/libslic3r/PrintConfig.cpp:849 #: src/libslic3r/PrintConfig.cpp:1222 src/libslic3r/PrintConfig.cpp:1401 #: src/libslic3r/PrintConfig.cpp:1464 src/libslic3r/PrintConfig.cpp:1715 #: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2860 #: src/libslic3r/PrintConfig.cpp:2986 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:265 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:267 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:277 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:279 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:280 src/libslic3r/PrintConfig.cpp:656 #: src/libslic3r/PrintConfig.cpp:664 src/libslic3r/PrintConfig.cpp:673 #: src/libslic3r/PrintConfig.cpp:681 src/libslic3r/PrintConfig.cpp:708 #: src/libslic3r/PrintConfig.cpp:727 src/libslic3r/PrintConfig.cpp:989 #: src/libslic3r/PrintConfig.cpp:1168 src/libslic3r/PrintConfig.cpp:1241 #: src/libslic3r/PrintConfig.cpp:1317 src/libslic3r/PrintConfig.cpp:1351 #: src/libslic3r/PrintConfig.cpp:1363 src/libslic3r/PrintConfig.cpp:1373 #: src/libslic3r/PrintConfig.cpp:1423 src/libslic3r/PrintConfig.cpp:1482 #: src/libslic3r/PrintConfig.cpp:1616 src/libslic3r/PrintConfig.cpp:1790 #: src/libslic3r/PrintConfig.cpp:1799 src/libslic3r/PrintConfig.cpp:2225 #: src/libslic3r/PrintConfig.cpp:2352 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:287 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:288 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:295 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:296 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:303 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:304 msgid "Heights at which a filament change is to occur." msgstr "" #: src/libslic3r/PrintConfig.cpp:314 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:315 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:329 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:330 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:347 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:348 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:356 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:357 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:362 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:363 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:370 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:371 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" #: src/libslic3r/PrintConfig.cpp:379 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:388 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:389 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:395 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:396 src/libslic3r/PrintConfig.cpp:2790 #: src/libslic3r/PrintConfig.cpp:2801 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:402 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:403 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:412 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:414 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:420 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:421 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:429 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all PrusaSlicer settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:439 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode (and before any toolchange from this filament in case of " "multimaterial printers). Note that you can use placeholder variables for all " "PrusaSlicer settings. If you have multiple extruders, the gcode is processed " "in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:450 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:452 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:458 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:460 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:470 src/libslic3r/PrintConfig.cpp:903 #: src/libslic3r/PrintConfig.cpp:2206 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:471 msgid "Monotonic" msgstr "" #: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:904 msgid "Aligned Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:473 src/libslic3r/PrintConfig.cpp:910 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:474 src/libslic3r/PrintConfig.cpp:914 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:475 src/libslic3r/PrintConfig.cpp:915 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:476 src/libslic3r/PrintConfig.cpp:916 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:482 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:484 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:493 src/libslic3r/PrintConfig.cpp:504 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:495 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:498 src/libslic3r/PrintConfig.cpp:607 #: src/libslic3r/PrintConfig.cpp:947 src/libslic3r/PrintConfig.cpp:960 #: src/libslic3r/PrintConfig.cpp:1078 src/libslic3r/PrintConfig.cpp:1133 #: src/libslic3r/PrintConfig.cpp:1159 src/libslic3r/PrintConfig.cpp:1606 #: src/libslic3r/PrintConfig.cpp:1931 src/libslic3r/PrintConfig.cpp:2080 #: src/libslic3r/PrintConfig.cpp:2148 src/libslic3r/PrintConfig.cpp:2309 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:506 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:509 src/libslic3r/PrintConfig.cpp:969 #: src/libslic3r/PrintConfig.cpp:1890 src/libslic3r/PrintConfig.cpp:1942 #: src/libslic3r/PrintConfig.cpp:2192 src/libslic3r/PrintConfig.cpp:2322 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:516 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:518 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:524 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:526 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:536 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:548 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:559 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:569 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:570 src/libslic3r/PrintConfig.cpp:630 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:576 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:577 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:586 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:587 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:592 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:593 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:601 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:603 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:613 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:614 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:619 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:620 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:622 src/libslic3r/PrintConfig.cpp:1878 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:629 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:635 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:636 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:1429 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:645 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:654 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:655 msgid "Speed used for loading the filament on the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:662 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:663 msgid "Speed used at the very beginning of loading phase." msgstr "" #: src/libslic3r/PrintConfig.cpp:670 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:671 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming)." msgstr "" #: src/libslic3r/PrintConfig.cpp:679 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:680 msgid "" "Speed used for unloading the tip of the filament immediately after ramming." msgstr "" #: src/libslic3r/PrintConfig.cpp:687 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:688 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions." msgstr "" #: src/libslic3r/PrintConfig.cpp:697 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:698 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:706 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:707 msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:714 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:715 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:719 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:725 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:726 msgid "Cooling moves are gradually accelerating towards this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:733 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:734 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:741 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:742 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" #: src/libslic3r/PrintConfig.cpp:748 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:749 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:757 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:764 src/libslic3r/PrintConfig.cpp:2701 #: src/libslic3r/PrintConfig.cpp:2702 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:765 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:768 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:773 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:774 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:801 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:802 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:808 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:809 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:814 msgid "Spool weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:815 msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " "filament spool before printing and one may compare the measured weight with " "the calculated weight of the filament with the spool to find out whether the " "amount of filament on the spool is sufficient to finish the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:819 msgid "g" msgstr "" #: src/libslic3r/PrintConfig.cpp:828 src/libslic3r/PrintConfig.cpp:2785 msgid "(Unknown)" msgstr "" #: src/libslic3r/PrintConfig.cpp:832 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:834 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:846 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:848 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:883 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:885 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:905 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:906 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:907 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:908 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:909 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:911 src/libslic3r/PrintConfig.cpp:2208 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:912 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:913 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:917 msgid "Adaptive Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:918 msgid "Support Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:922 src/libslic3r/PrintConfig.cpp:931 #: src/libslic3r/PrintConfig.cpp:941 src/libslic3r/PrintConfig.cpp:975 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:923 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:932 msgid "First layer bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:933 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:943 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:956 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:965 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:966 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:976 msgid "First layer nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:977 msgid "" "Nozzle temperature for the first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:987 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:995 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:996 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:1003 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1004 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:1029 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:1034 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:1035 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1042 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1043 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:1051 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1059 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1061 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:1064 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1070 msgid "Length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1072 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than infill_anchor_max is found, the infill line is " "connected to a perimeter segment at just one side and the length of the " "perimeter segment taken is limited to this parameter, but no longer than " "anchor_length_max. Set this parameter to zero to disable anchoring " "perimeters connected to a single infill line." msgstr "" #: src/libslic3r/PrintConfig.cpp:1087 msgid "0 (no open anchors)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1092 src/libslic3r/PrintConfig.cpp:1114 msgid "1000 (unlimited)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1097 msgid "Maximum length of the infill anchor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1099 msgid "" "Connect an infill line to an internal perimeter with a short segment of an " "additional perimeter. If expressed as percentage (example: 15%) it is " "calculated over infill extrusion width. PrusaSlicer tries to connect two " "close infill lines to a short perimeter segment. If no such perimeter " "segment shorter than this parameter is found, the infill line is connected " "to a perimeter segment at just one side and the length of the perimeter " "segment taken is limited to infill_anchor, but no longer than this " "parameter. Set this parameter to zero to disable anchoring." msgstr "" #: src/libslic3r/PrintConfig.cpp:1109 msgid "0 (not anchored)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1119 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1121 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1129 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1139 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1140 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:1145 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1147 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:1154 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:1156 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1167 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1175 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1176 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1189 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1190 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1198 msgid "Enable ironing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1199 msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:1205 src/libslic3r/PrintConfig.cpp:1207 msgid "Ironing Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1212 msgid "All top surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1213 msgid "Topmost surface only" msgstr "" #: src/libslic3r/PrintConfig.cpp:1214 msgid "All solid surfaces" msgstr "" #: src/libslic3r/PrintConfig.cpp:1219 msgid "Flow rate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1221 msgid "Percent of a flow rate relative to object's normal layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1229 msgid "Spacing between ironing passes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1231 msgid "Distance between ironing lines" msgstr "" #: src/libslic3r/PrintConfig.cpp:1248 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1259 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1260 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1268 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1269 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1274 msgid "How to apply limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1275 msgid "Purpose of Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1277 msgid "How to apply the Machine Limits" msgstr "" #: src/libslic3r/PrintConfig.cpp:1282 msgid "Emit to G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:1283 msgid "Use for time estimate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1284 msgid "Ignore" msgstr "" #: src/libslic3r/PrintConfig.cpp:1307 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1308 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1309 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1310 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1313 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1314 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1315 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1316 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1324 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1325 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1326 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1327 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1330 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1331 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1332 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1333 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1341 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1342 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1343 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1344 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1347 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1348 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1349 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1350 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1360 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1362 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1370 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1372 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1380 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1382 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1390 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1392 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1408 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1400 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1409 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1419 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1420 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1430 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1439 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1440 src/libslic3r/PrintConfig.cpp:1451 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1444 src/libslic3r/PrintConfig.cpp:1455 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1450 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1462 src/libslic3r/PrintConfig.cpp:1471 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1463 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1472 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1480 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1481 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1488 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1489 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1498 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1499 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1509 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1514 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1515 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1532 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1533 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1540 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1547 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1548 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1557 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1559 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1565 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1566 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware." msgstr "" #: src/libslic3r/PrintConfig.cpp:1574 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1575 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading." msgstr "" #: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1600 #: src/libslic3r/PrintConfig.cpp:1613 src/libslic3r/PrintConfig.cpp:1623 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1584 msgid "" "This is the acceleration your printer will use for perimeters. Set zero to " "disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1591 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1593 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1602 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1615 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1625 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1629 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1637 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1649 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1650 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1655 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1656 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1664 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1665 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1670 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1671 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1684 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1686 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1694 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1695 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1705 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1706 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1712 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1713 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1720 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1721 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1726 src/libslic3r/PrintConfig.cpp:1734 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1727 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1728 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1730 src/libslic3r/PrintConfig.cpp:1739 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1735 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1736 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1744 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1745 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1752 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1753 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1754 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1761 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1762 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1763 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1771 src/libslic3r/PrintConfig.cpp:1779 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1772 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1780 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1787 src/libslic3r/PrintConfig.cpp:1788 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1789 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1795 src/libslic3r/PrintConfig.cpp:1796 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1797 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1804 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1806 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1812 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1813 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1814 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1822 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1824 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1825 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1832 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1834 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1835 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1842 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1843 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1850 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1851 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1858 msgid "Draft shield" msgstr "" #: src/libslic3r/PrintConfig.cpp:1859 msgid "" "If enabled, the skirt will be as tall as a highest printed object. This is " "useful to protect an ABS or ASA print from warping and detaching from print " "bed due to wind draft." msgstr "" #: src/libslic3r/PrintConfig.cpp:1865 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1866 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1867 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1875 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1876 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1885 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1887 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1897 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1899 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1900 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1906 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1908 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1914 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1916 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1928 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1939 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1951 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1957 src/libslic3r/PrintConfig.cpp:1958 msgid "Minimum thickness of a top / bottom shell" msgstr "" #: src/libslic3r/PrintConfig.cpp:1964 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1965 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: src/libslic3r/PrintConfig.cpp:1973 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:1974 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:1984 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If PrusaSlicer detects M104 or M190 in your custom " "codes, such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all PrusaSlicer settings, so you can " "put a \"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:1999 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode (and after any toolchange to this filament in case of multi-material " "printers). This is used to override settings for a specific filament. If " "PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such " "commands will not be prepended automatically so you're free to customize the " "order of heating commands and other custom actions. Note that you can use " "placeholder variables for all PrusaSlicer settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:2015 msgid "Color change G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2016 msgid "This G-code will be used as a code for the color change" msgstr "" #: src/libslic3r/PrintConfig.cpp:2025 msgid "This G-code will be used as a code for the pause print" msgstr "" #: src/libslic3r/PrintConfig.cpp:2034 msgid "This G-code will be used as a custom code" msgstr "" #: src/libslic3r/PrintConfig.cpp:2042 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2043 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:2048 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:2049 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2054 msgid "No sparse layers (EXPERIMENTAL)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2055 msgid "" "If enabled, the wipe tower will not be printed on layers with no " "toolchanges. On layers with a toolchange, extruder will travel downward to " "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2062 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:2064 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2068 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2070 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:2076 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2078 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:2088 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2090 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:2100 src/libslic3r/PrintConfig.cpp:2895 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:2106 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2108 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:2115 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2116 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:2121 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:2123 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:2128 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2134 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2136 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2145 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2154 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:2156 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2161 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:2163 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:2170 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2172 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2179 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2181 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:2190 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:2199 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:2201 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2207 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:2213 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:2215 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:2224 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:2231 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2233 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:2239 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:2241 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2253 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:2255 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2262 msgid "" "Nozzle temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2265 msgid "Nozzle temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2271 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2273 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2279 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2280 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2292 msgid "" "This custom code is inserted before every toolchange. Placeholder variables " "for all PrusaSlicer settings as well as {previous_extruder} and " "{next_extruder} can be used. When a tool-changing command which changes to " "the correct extruder is included (such as T{next_extruder}), PrusaSlicer " "will emit no other such command. It is therefore possible to script custom " "behaviour both before and after the toolchange." msgstr "" #: src/libslic3r/PrintConfig.cpp:2305 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2317 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2332 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2333 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2341 msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2344 msgid "Minimum top shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2351 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2359 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2360 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2366 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2367 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2373 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2374 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2384 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2385 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2391 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2392 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2399 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2405 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2406 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below." msgstr "" #: src/libslic3r/PrintConfig.cpp:2412 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2413 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools." msgstr "" #: src/libslic3r/PrintConfig.cpp:2422 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2423 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2429 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2430 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2437 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2443 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2444 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "" #: src/libslic3r/PrintConfig.cpp:2451 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2452 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2459 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2460 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2466 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2467 msgid "Maximal distance between supports on sparse infill sections." msgstr "" #: src/libslic3r/PrintConfig.cpp:2473 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2475 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2483 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2484 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2551 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2552 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2557 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2558 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2563 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2565 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2571 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2576 msgid "Display horizontal mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2577 msgid "Mirror horizontally" msgstr "" #: src/libslic3r/PrintConfig.cpp:2578 msgid "Enable horizontal mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2583 msgid "Display vertical mirroring" msgstr "" #: src/libslic3r/PrintConfig.cpp:2584 msgid "Mirror vertically" msgstr "" #: src/libslic3r/PrintConfig.cpp:2585 msgid "Enable vertical mirroring of output images" msgstr "" #: src/libslic3r/PrintConfig.cpp:2590 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2591 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2597 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2598 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2603 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2604 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2605 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2612 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2613 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2614 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2621 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2622 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2629 src/libslic3r/PrintConfig.cpp:2630 #: src/libslic3r/PrintConfig.cpp:2631 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2637 src/libslic3r/PrintConfig.cpp:2638 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2639 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2645 msgid "Elephant foot minimum width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2647 msgid "" "Minimum width of features to maintain when doing elephant foot compensation." msgstr "" #: src/libslic3r/PrintConfig.cpp:2654 src/libslic3r/PrintConfig.cpp:2655 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2656 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2668 src/libslic3r/PrintConfig.cpp:2669 msgid "SLA material type" msgstr "" #: src/libslic3r/PrintConfig.cpp:2680 src/libslic3r/PrintConfig.cpp:2681 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2687 src/libslic3r/PrintConfig.cpp:2688 msgid "Bottle volume" msgstr "" #: src/libslic3r/PrintConfig.cpp:2689 msgid "ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2694 src/libslic3r/PrintConfig.cpp:2695 msgid "Bottle weight" msgstr "" #: src/libslic3r/PrintConfig.cpp:2696 msgid "kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:2703 msgid "g/ml" msgstr "" #: src/libslic3r/PrintConfig.cpp:2710 msgid "money/bottle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2715 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2716 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2723 src/libslic3r/PrintConfig.cpp:2724 msgid "Minimum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2731 src/libslic3r/PrintConfig.cpp:2732 msgid "Maximum exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2739 src/libslic3r/PrintConfig.cpp:2740 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2746 src/libslic3r/PrintConfig.cpp:2747 msgid "Minimum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2754 src/libslic3r/PrintConfig.cpp:2755 msgid "Maximum initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2762 src/libslic3r/PrintConfig.cpp:2763 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2769 src/libslic3r/PrintConfig.cpp:2770 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2776 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2777 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2789 src/libslic3r/PrintConfig.cpp:2800 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2811 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2813 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2818 msgid "Pinhead front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2820 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2827 msgid "Head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2829 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2836 msgid "Pinhead width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2838 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2846 msgid "Pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2848 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2856 msgid "Small pillar diameter percent" msgstr "" #: src/libslic3r/PrintConfig.cpp:2858 msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" #: src/libslic3r/PrintConfig.cpp:2867 msgid "Max bridges on a pillar" msgstr "" #: src/libslic3r/PrintConfig.cpp:2869 msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" #: src/libslic3r/PrintConfig.cpp:2877 msgid "Pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2878 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2886 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2887 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2888 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2900 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2902 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2911 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2913 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2921 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2923 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2930 msgid "Support base safety distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2933 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2943 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2945 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2953 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2955 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2962 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2964 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2974 msgid "" "How much the supports should lift up the supported object. If \"Pad around " "object\" is enabled, this value is ignored." msgstr "" #: src/libslic3r/PrintConfig.cpp:2985 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:2991 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:2993 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2999 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:3001 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:3006 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3008 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3016 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:3017 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:3030 msgid "Pad brim size" msgstr "" #: src/libslic3r/PrintConfig.cpp:3031 msgid "How far should the pad extend around the contained geometry" msgstr "" #: src/libslic3r/PrintConfig.cpp:3041 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:3043 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3063 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:3065 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:3076 msgid "Create pad around object and ignore the support elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:3081 msgid "Pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3083 msgid "Force pad around object everywhere" msgstr "" #: src/libslic3r/PrintConfig.cpp:3088 msgid "Pad object gap" msgstr "" #: src/libslic3r/PrintConfig.cpp:3090 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:3099 msgid "Pad object connector stride" msgstr "" #: src/libslic3r/PrintConfig.cpp:3101 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3108 msgid "Pad object connector width" msgstr "" #: src/libslic3r/PrintConfig.cpp:3110 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:3117 msgid "Pad object connector penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:3120 msgid "How much should the tiny connectors penetrate into the model body." msgstr "" #: src/libslic3r/PrintConfig.cpp:3127 msgid "Enable hollowing" msgstr "" #: src/libslic3r/PrintConfig.cpp:3129 msgid "Hollow out a model to have an empty interior" msgstr "" #: src/libslic3r/PrintConfig.cpp:3134 msgid "Wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:3136 msgid "Minimum wall thickness of a hollowed model." msgstr "" #: src/libslic3r/PrintConfig.cpp:3144 msgid "Accuracy" msgstr "" #: src/libslic3r/PrintConfig.cpp:3146 msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" #: src/libslic3r/PrintConfig.cpp:3156 msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " "deeper (offset plus the closing distance) in the object and then it's " "inflated back to the specified offset. A greater closing distance makes the " "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" #: src/libslic3r/PrintConfig.cpp:3569 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:3570 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:3581 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:3582 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:3587 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3588 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3592 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:3593 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:3597 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:3598 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:3603 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:3608 msgid "G-code viewer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3609 msgid "Visualize an already sliced and saved G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:3614 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:3615 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3620 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3621 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3626 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3627 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3631 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3632 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3636 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3637 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3641 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3642 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3652 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3653 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3658 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3679 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3680 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3684 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3685 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3688 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3689 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3693 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3694 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3698 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3703 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3707 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3711 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3712 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3716 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3717 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3722 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3727 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3730 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3731 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3740 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3741 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3744 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3745 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3748 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3749 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3754 msgid "" "If enabled, the command line arguments are sent to an existing instance of " "GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides " "the \"single_instance\" configuration value from application preferences." msgstr "" #: src/libslic3r/PrintConfig.cpp:3765 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3766 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3769 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3770 msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" #: src/libslic3r/PrintConfig.cpp:3776 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3777 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "" #: src/libslic3r/PrintObject.cpp:113 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:157 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:260 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:421 msgid "Generating support material" msgstr ""