# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-18 12:28+0100\n"
"PO-Revision-Date: 2020-11-28 16:03+0100\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 2.4.2\n"
"Last-Translator: \n"
"Language: nl\n"

#: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:297
msgid "Portions copyright"
msgstr "Gedeeltelijk auteursrecht"

#: src/slic3r/GUI/AboutDialog.cpp:132 src/slic3r/GUI/AboutDialog.cpp:261
msgid "Copyright"
msgstr "Copyright"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:134
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""
"Licentieovereenkomst van alle volgende programma's maken deel uit van de "
"software-licentieovereenkomst"

#: src/slic3r/GUI/AboutDialog.cpp:204
#, c-format
msgid "About %s"
msgstr "Over %s"

#: src/slic3r/GUI/AboutDialog.cpp:236 src/slic3r/GUI/GUI_App.cpp:231
#: src/slic3r/GUI/MainFrame.cpp:164
msgid "Version"
msgstr "Versie"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:263 src/slic3r/GUI/GUI_App.cpp:236
msgid "is licensed under the"
msgstr "is gelicenseerd onder de"

#: src/slic3r/GUI/AboutDialog.cpp:264 src/slic3r/GUI/GUI_App.cpp:236
msgid "GNU Affero General Public License, version 3"
msgstr "GNU Affero Algemene Publieke Licentie, versie 3"

#: src/slic3r/GUI/AboutDialog.cpp:265
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""
"PrusaSlicer is gebaseerd op Slic3r van Alessandro Ranellucci en de RepRap-"
"community."

#: src/slic3r/GUI/AboutDialog.cpp:266
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Bijdragen van Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr "
"Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Simon "
"Tillema en vele anderen."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:77
#, c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""
"Fout in %s. Mogelijk komt dit door een tekort aan RAM geheugen. Als u er "
"zeker van bent genoeg RAM geheugen te hebben, kan dit een andere oorzaak "
"hebben. We stellen het op prijs als u het aan ons rapporteert."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:156
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""
"Fout bij het exporteren naar output-G-code. Is de SD-kaart geblokkeerd tegen "
"schrijven?\n"
"Foutbericht: %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:159
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""
"Fout bij het exporteren naar output-G-code. Het probleem ligt mogelijk bij "
"het doelapparaat. Probeer het opnieuw te exporteren of gebruik een ander "
"apparat. De beschadigde G-code is opgeslagen als %1%.tmp."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""
"Fout bij het exporteren naar output-G-code. Hernoemen van het bestand "
"mislukt. Huidige locatie is %1%.tmp. Probeer opnieuw te exporteren."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:165
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""
"Fout bij het exporteren naar output-G-code. Exporteren gelukt, maar kan het "
"bestand %1% niet openen om te controleren. De output is %1%.tmp."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""
"Fout bij het exporteren naar output-G-code. Exporteren gelukt, maar kan het "
"bestand niet openen om te controleren. De output is %1%.tmp."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:171
msgid "Unknown error occured during exporting G-code."
msgstr "Onbekende error opgetreden tijdens exporteren van de G-code."

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:176
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:525
msgid "Running post-processing scripts"
msgstr "Uitvoeren van nabewerkingsscripts"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:178
msgid "G-code file exported to %1%"
msgstr "G-code-bestand geëxporteerd naar %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:232
msgid "Slicing complete"
msgstr "Slicen gelukt"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:227
msgid "Masked SLA file exported to %1%"
msgstr "Gemaskeerd SLA bestand geëxporteerd naar %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:528
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr "Fout bij het exporteren naar de output-G-code"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:551
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
"Plannen van de upload naar '%1%'. Zie Venster -> printhost-uploadwachtrij"

#: src/slic3r/GUI/BedShapeDialog.cpp:93
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:161
#: src/slic3r/GUI/Tab.cpp:2504
msgid "Size"
msgstr "Grootte"

#: src/slic3r/GUI/BedShapeDialog.cpp:94
msgid "Origin"
msgstr "Nulpunt"

#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:752
msgid "Diameter"
msgstr "Diameter"

#: src/slic3r/GUI/BedShapeDialog.cpp:110
msgid "Size in X and Y of the rectangular plate."
msgstr "Afmeting in X en Y van het rechthoekig platform."

#: src/slic3r/GUI/BedShapeDialog.cpp:121
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""
"Afstand van het nulpunt in de G-code naar de linkervoorhoek van het printbed."

#: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:240
#: src/slic3r/GUI/ConfigWizard.cpp:1346 src/slic3r/GUI/ConfigWizard.cpp:1360
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
#: src/slic3r/GUI/GCodeViewer.cpp:2275 src/slic3r/GUI/GCodeViewer.cpp:2281
#: src/slic3r/GUI/GCodeViewer.cpp:2289 src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75
#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:93
#: src/libslic3r/PrintConfig.cpp:131 src/libslic3r/PrintConfig.cpp:229
#: src/libslic3r/PrintConfig.cpp:287 src/libslic3r/PrintConfig.cpp:362
#: src/libslic3r/PrintConfig.cpp:370 src/libslic3r/PrintConfig.cpp:420
#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:559
#: src/libslic3r/PrintConfig.cpp:577 src/libslic3r/PrintConfig.cpp:755
#: src/libslic3r/PrintConfig.cpp:1167 src/libslic3r/PrintConfig.cpp:1348
#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1427
#: src/libslic3r/PrintConfig.cpp:1445 src/libslic3r/PrintConfig.cpp:1503
#: src/libslic3r/PrintConfig.cpp:1513 src/libslic3r/PrintConfig.cpp:1635
#: src/libslic3r/PrintConfig.cpp:1643 src/libslic3r/PrintConfig.cpp:1684
#: src/libslic3r/PrintConfig.cpp:1692 src/libslic3r/PrintConfig.cpp:1702
#: src/libslic3r/PrintConfig.cpp:1710 src/libslic3r/PrintConfig.cpp:1718
#: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:2047
#: src/libslic3r/PrintConfig.cpp:2118 src/libslic3r/PrintConfig.cpp:2152
#: src/libslic3r/PrintConfig.cpp:2281 src/libslic3r/PrintConfig.cpp:2360
#: src/libslic3r/PrintConfig.cpp:2367 src/libslic3r/PrintConfig.cpp:2374
#: src/libslic3r/PrintConfig.cpp:2404 src/libslic3r/PrintConfig.cpp:2414
#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2584
#: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2757
#: src/libslic3r/PrintConfig.cpp:2766 src/libslic3r/PrintConfig.cpp:2775
#: src/libslic3r/PrintConfig.cpp:2785 src/libslic3r/PrintConfig.cpp:2850
#: src/libslic3r/PrintConfig.cpp:2860 src/libslic3r/PrintConfig.cpp:2872
#: src/libslic3r/PrintConfig.cpp:2892 src/libslic3r/PrintConfig.cpp:2902
#: src/libslic3r/PrintConfig.cpp:2912 src/libslic3r/PrintConfig.cpp:2930
#: src/libslic3r/PrintConfig.cpp:2945 src/libslic3r/PrintConfig.cpp:2959
#: src/libslic3r/PrintConfig.cpp:2970 src/libslic3r/PrintConfig.cpp:2983
#: src/libslic3r/PrintConfig.cpp:3028 src/libslic3r/PrintConfig.cpp:3038
#: src/libslic3r/PrintConfig.cpp:3047 src/libslic3r/PrintConfig.cpp:3057
#: src/libslic3r/PrintConfig.cpp:3073 src/libslic3r/PrintConfig.cpp:3097
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:131
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
"Diameter van het printbed. Aangenomen wordt dat het nulpunt in het midden "
"ligt."

#: src/slic3r/GUI/BedShapeDialog.cpp:141
msgid "Rectangular"
msgstr "Rechthoekig"

#: src/slic3r/GUI/BedShapeDialog.cpp:142
msgid "Circular"
msgstr "Rond"

#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:309
#: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:358
msgid "Custom"
msgstr "Aangepast"

#: src/slic3r/GUI/BedShapeDialog.cpp:145
msgid "Invalid"
msgstr "Ongeldig"

#: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222
#: src/slic3r/GUI/GUI_ObjectList.cpp:2215
msgid "Shape"
msgstr "Vorm"

#: src/slic3r/GUI/BedShapeDialog.cpp:243
msgid "Load shape from STL..."
msgstr "Laad vorm van STL..."

#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1981
msgid "Settings"
msgstr "Instellingen"

#: src/slic3r/GUI/BedShapeDialog.cpp:315
msgid "Texture"
msgstr "Textuur"

#: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
msgid "Load..."
msgstr "Laad..."

#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413
#: src/slic3r/GUI/Tab.cpp:3447
msgid "Remove"
msgstr "Verwijder"

#: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446
msgid "Not found:"
msgstr "Niet gevonden:"

#: src/slic3r/GUI/BedShapeDialog.cpp:395
msgid "Model"
msgstr "Model"

#: src/slic3r/GUI/BedShapeDialog.cpp:563
msgid "Choose an STL file to import bed shape from:"
msgstr "Kies een STL-bestand om te importeren als bedvorm:"

#: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619
#: src/slic3r/GUI/BedShapeDialog.cpp:642
msgid "Invalid file format."
msgstr "Ongeldig bestandsformaat."

#: src/slic3r/GUI/BedShapeDialog.cpp:581
msgid "Error! Invalid model"
msgstr "Fout! Ongeldig model"

#: src/slic3r/GUI/BedShapeDialog.cpp:589
msgid "The selected file contains no geometry."
msgstr "Het geselecteerde bestand bevat geen geometrie."

#: src/slic3r/GUI/BedShapeDialog.cpp:593
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""
"Het geselecteerde model bevat meerdere losse delen. Dit wordt niet "
"ondersteund."

#: src/slic3r/GUI/BedShapeDialog.cpp:608
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr "Kies een bestand om te importeren als bedtextuur (PNG/SVG):"

#: src/slic3r/GUI/BedShapeDialog.cpp:631
msgid "Choose an STL file to import bed model from:"
msgstr "Kies een STL-bestand om te importeren als bedvorm:"

#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1305
msgid "Bed Shape"
msgstr "Bedvorm"

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr "Netwerk zoeken"

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr "Adres"

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr "Hostnaam"

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr "Servicenaam"

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr "OctoPrint-versie"

#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr "Zoeken naar apparaten"

#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr "Klaar"

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr "Knoppen- en tekstkleurbeschrijving"

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr "Waarde is niet gelijk aan systeemwaarde"

#: src/slic3r/GUI/ButtonsDescription.cpp:53
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""
"Waarde is veranderd en niet gelijk aan systeemwaarde of laatst opgeslagen "
"voorinstelling"

#: src/slic3r/GUI/ConfigManipulation.cpp:47
msgid ""
"Zero layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""
"Laagdikte van 0 is niet toegestaan.\n"
"\n"
"De laagdikte wordt ingesteld op 0.01."

#: src/slic3r/GUI/ConfigManipulation.cpp:48
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1376
#: src/libslic3r/PrintConfig.cpp:71
msgid "Layer height"
msgstr "Laagdikte"

#: src/slic3r/GUI/ConfigManipulation.cpp:59
msgid ""
"Zero first layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""
"Laagdikte van 0 op eerste laag is niet toegestaan.\n"
"\n"
"De laagdikte wordt ingesteld op 0.01."

#: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:938
msgid "First layer height"
msgstr "Laagdikte eerste laag"

#: src/slic3r/GUI/ConfigManipulation.cpp:80
#, c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""
"De spiraalmodus vereist:\n"
"- één perimeter\n"
"- geen dichte toplagen\n"
"- vullingsdichtheid van 0%\n"
"- geen supportmateriaal\n"
"- 'Garandeer verticale shelldikte' aan\n"
"- 'Detecteer dunne wanden' uit"

#: src/slic3r/GUI/ConfigManipulation.cpp:88
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""
"Moeten deze instellingen aangepast worden om de spiraalmodus te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:89
msgid "Spiral Vase"
msgstr "Spiraalmodus"

#: src/slic3r/GUI/ConfigManipulation.cpp:114
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""
"Het afveegblok ondersteunt voorlopig alleen onoplosbaar supportmateriaal\n"
"als ze met de huidige extruder worden geprint zonder toolwisseling.\n"
"(zowel support_material_extruder als support_material_interface_extruder "
"moet op 0 staan)."

#: src/slic3r/GUI/ConfigManipulation.cpp:118
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""
"Moeten deze instellingen aangepast worden om het afveegblok te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:119
#: src/slic3r/GUI/ConfigManipulation.cpp:139
msgid "Wipe Tower"
msgstr "Afveegblok"

#: src/slic3r/GUI/ConfigManipulation.cpp:135
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""
"De supportlagen moeten gesynchroniseerd worden om oplosbaar support\n"
"met het afveegblok te laten werken."

#: src/slic3r/GUI/ConfigManipulation.cpp:138
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""
"Moeten de supportlagen gesynchroniseerd worden met de overage lagen om het "
"afveegblok te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:158
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""
"Support werkt beter als de volgende instellingen zijn geactiveerd:\n"
"- \"Detecteer brugperimeters\""

#: src/slic3r/GUI/ConfigManipulation.cpp:161
msgid "Shall I adjust those settings for supports?"
msgstr ""
"Moeten deze instellingen aangepast worden om supportmateriaal te activeren?"

#: src/slic3r/GUI/ConfigManipulation.cpp:162
msgid "Support Generator"
msgstr "Supportgenerator"

#: src/slic3r/GUI/ConfigManipulation.cpp:207
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr "Het %1% vullingspatroon wordt niet ondersteunt bij 100%% dichtheid."

#: src/slic3r/GUI/ConfigManipulation.cpp:209
msgid "Shall I switch to rectilinear fill pattern?"
msgstr "Moet dit aangepast worden naar het rechtlijnig patroon?"

#: src/slic3r/GUI/ConfigManipulation.cpp:210
#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93
#: src/slic3r/GUI/GUI_ObjectList.cpp:652 src/slic3r/GUI/Plater.cpp:388
#: src/slic3r/GUI/Tab.cpp:1420 src/slic3r/GUI/Tab.cpp:1422
#: src/libslic3r/PrintConfig.cpp:244 src/libslic3r/PrintConfig.cpp:457
#: src/libslic3r/PrintConfig.cpp:479 src/libslic3r/PrintConfig.cpp:819
#: src/libslic3r/PrintConfig.cpp:833 src/libslic3r/PrintConfig.cpp:870
#: src/libslic3r/PrintConfig.cpp:1034 src/libslic3r/PrintConfig.cpp:1044
#: src/libslic3r/PrintConfig.cpp:1062 src/libslic3r/PrintConfig.cpp:1081
#: src/libslic3r/PrintConfig.cpp:1100 src/libslic3r/PrintConfig.cpp:1834
#: src/libslic3r/PrintConfig.cpp:1851
msgid "Infill"
msgstr "Vulling"

#: src/slic3r/GUI/ConfigManipulation.cpp:322
msgid "Head penetration should not be greater than the head width."
msgstr "Koppenetratie mag niet groter zijn dan de kopbreedte."

#: src/slic3r/GUI/ConfigManipulation.cpp:324
msgid "Invalid Head penetration"
msgstr "Ongeldige koppenetratie"

#: src/slic3r/GUI/ConfigManipulation.cpp:335
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "Pinkopdiameter moet kleiner zijn dan de pijlerdiameter."

#: src/slic3r/GUI/ConfigManipulation.cpp:337
msgid "Invalid pinhead diameter"
msgstr "Ongeldige pinkopdiameter"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Upgrade"
msgstr "Upgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Downgrade"
msgstr "Downgrade"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Before roll back"
msgstr "Voor terugrollen"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 src/libslic3r/PrintConfig.cpp:139
msgid "User"
msgstr "Gebruiker"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
#: src/slic3r/GUI/GUI_Preview.cpp:294 src/libslic3r/ExtrusionEntity.cpp:309
msgid "Unknown"
msgstr "Onbekend"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
msgid "Active"
msgstr "Actief"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
msgid "PrusaSlicer version"
msgstr "PrusaSlicer versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54 src/libslic3r/Preset.cpp:1257
msgid "print"
msgstr "print"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
msgid "filaments"
msgstr "filamenten"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 src/libslic3r/Preset.cpp:1259
msgid "SLA print"
msgstr "SLA-print"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/slic3r/GUI/Plater.cpp:688
#: src/libslic3r/Preset.cpp:1260
msgid "SLA material"
msgstr "SLA-materiaal"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:61 src/libslic3r/Preset.cpp:1261
msgid "printer"
msgstr "printer"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65 src/slic3r/GUI/Tab.cpp:1293
msgid "vendor"
msgstr "leverancier"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
msgid "version"
msgstr "versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
msgid "min PrusaSlicer version"
msgstr "min. PrusaSlicer versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
msgid "max PrusaSlicer version"
msgstr "max. PrusaSlicer versie"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
msgid "model"
msgstr "model"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
msgid "variants"
msgstr "varianten"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:83
#, c-format
msgid "Incompatible with this %s"
msgstr "Niet geschikt voor deze %s"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:86
msgid "Activate"
msgstr "Activeer"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:112
msgid "Configuration Snapshots"
msgstr "Configuratieopnamen"

#: src/slic3r/GUI/ConfigWizard.cpp:240
msgid "nozzle"
msgstr "nozzle"

#: src/slic3r/GUI/ConfigWizard.cpp:244
msgid "Alternate nozzles:"
msgstr "Overige nozzles:"

#: src/slic3r/GUI/ConfigWizard.cpp:308
msgid "All standard"
msgstr "Alle standaard"

#: src/slic3r/GUI/ConfigWizard.cpp:308
msgid "Standard"
msgstr "Standaard"

#: src/slic3r/GUI/ConfigWizard.cpp:309 src/slic3r/GUI/ConfigWizard.cpp:599
#: src/slic3r/GUI/Tab.cpp:3528 src/slic3r/GUI/UnsavedChangesDialog.cpp:921
msgid "All"
msgstr "Alles"

#: src/slic3r/GUI/ConfigWizard.cpp:310 src/slic3r/GUI/ConfigWizard.cpp:600
#: src/slic3r/GUI/Plater.cpp:360 src/slic3r/GUI/Plater.cpp:500
msgid "None"
msgstr "Geen"

#: src/slic3r/GUI/ConfigWizard.cpp:446
#, c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr "Welkom bij de %s configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:448
#, c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr "Welkom bij de %s configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:450
msgid "Welcome"
msgstr "Welkom"

#: src/slic3r/GUI/ConfigWizard.cpp:452
#, c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""
"Hallo, welkom bij %s! Deze %s helpt u bij de eerste configuratie; nog een "
"paar stappen te gaan en u bent klaar om te printen."

#: src/slic3r/GUI/ConfigWizard.cpp:457
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr "Verwijder gebruikersprofielen (vooraf wordt een opname gemaakt)"

#: src/slic3r/GUI/ConfigWizard.cpp:500
#, c-format
msgid "%s Family"
msgstr "%s serie"

#: src/slic3r/GUI/ConfigWizard.cpp:588
msgid "Printer:"
msgstr "Printer:"

#: src/slic3r/GUI/ConfigWizard.cpp:590
msgid "Vendor:"
msgstr "Leverancier:"

#: src/slic3r/GUI/ConfigWizard.cpp:591
msgid "Profile:"
msgstr "Profiel:"

#: src/slic3r/GUI/ConfigWizard.cpp:663 src/slic3r/GUI/ConfigWizard.cpp:813
#: src/slic3r/GUI/ConfigWizard.cpp:874 src/slic3r/GUI/ConfigWizard.cpp:1011
msgid "(All)"
msgstr "(Alles)"

#: src/slic3r/GUI/ConfigWizard.cpp:692
msgid ""
"Filaments marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""
"Filamenten die gemarkeerd zijn met <b>*<b> zijn <b>niet<b> geschikt voor "
"sommige geïnstalleerde printers."

#: src/slic3r/GUI/ConfigWizard.cpp:695
msgid "All installed printers are compatible with the selected filament."
msgstr ""
"Alle geïnstalleerde printers zijn geschikt voor het geselecteerde filament."

#: src/slic3r/GUI/ConfigWizard.cpp:715
msgid ""
"Only the following installed printers are compatible with the selected "
"filament:"
msgstr ""
"Alleen de volgende geïnstalleerde printers zijn geschikt voor het "
"geselecteerde filament:"

#: src/slic3r/GUI/ConfigWizard.cpp:1101
msgid "Custom Printer Setup"
msgstr "Custom printersetup"

#: src/slic3r/GUI/ConfigWizard.cpp:1101
msgid "Custom Printer"
msgstr "Custom printer"

#: src/slic3r/GUI/ConfigWizard.cpp:1103
msgid "Define a custom printer profile"
msgstr "Definieer een custom printerprofiel"

#: src/slic3r/GUI/ConfigWizard.cpp:1105
msgid "Custom profile name:"
msgstr "Custom profielnaam:"

#: src/slic3r/GUI/ConfigWizard.cpp:1130
msgid "Automatic updates"
msgstr "Automatische updates"

#: src/slic3r/GUI/ConfigWizard.cpp:1130
msgid "Updates"
msgstr "Updates"

#: src/slic3r/GUI/ConfigWizard.cpp:1138 src/slic3r/GUI/Preferences.cpp:81
msgid "Check for application updates"
msgstr "Controleer voor programma-updates"

#: src/slic3r/GUI/ConfigWizard.cpp:1142
#, c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"%s controleert op nieuwe versie online als dit is geactiveerd. Als een "
"nieuwe versie beschikbaar komt, wordt bij de volgende keer opstarten een "
"melding getoond (nooit tijdens gebruik). Dit is slechts een melding."

#: src/slic3r/GUI/ConfigWizard.cpp:1148 src/slic3r/GUI/Preferences.cpp:97
msgid "Update built-in Presets automatically"
msgstr "Update ingebouwde voorinstellingen automatisch"

#: src/slic3r/GUI/ConfigWizard.cpp:1152
#, c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"%s download updates op ingebouwde voorinstellingen in de achtergrond als dit "
"is geactiveerd. De updates worden in een tijdelijke locatie opgeslagen. "
"Wanneer een nieuwe voorinstelling beschikbaar komt, wordt een melding "
"getoond tijdens het opstarten."

#: src/slic3r/GUI/ConfigWizard.cpp:1155
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"Updates worden nooit toegepast zonder toestemming van de gebruiker en zullen "
"nooit aangepaste instellingen overschrijven."

#: src/slic3r/GUI/ConfigWizard.cpp:1160
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Daarnaast wordt een backup-opname van de hele configuratie gemaakt voor een "
"update wordt toegepast."

#: src/slic3r/GUI/ConfigWizard.cpp:1167 src/slic3r/GUI/GUI_ObjectList.cpp:1793
#: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3120
#: src/slic3r/GUI/Plater.cpp:3953 src/slic3r/GUI/Plater.cpp:3982
msgid "Reload from disk"
msgstr "Herlaad van schijf"

#: src/slic3r/GUI/ConfigWizard.cpp:1170
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""
"Exporteer volledige padnaam van modellen en bronnen in 3MF en AMF bestanden"

#: src/slic3r/GUI/ConfigWizard.cpp:1174
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""
"Sta toe om bestanden automatisch te vinden bij het herladen van de schijf "
"als dit is geactiveerd.\n"
"Als dit niet is geactiveerd vraagt het programma elke bestand apart te "
"selecteren."

#: src/slic3r/GUI/ConfigWizard.cpp:1182
msgid "View mode"
msgstr "Toon modus"

#: src/slic3r/GUI/ConfigWizard.cpp:1184
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""
"De interface van PrusaSlicer kent drie varianten:\n"
"Eenvoudig, Geavanceerd en Expert.\n"
"De eenvoudige modus toont alleen de meest frequent gebruikte instellingen. "
"De andere twee tonen meer geavanceerdere instellingen voor het fine-tunen. "
"Ze zijn van toepassing voor respectievelijk experts en gevorderden."

#: src/slic3r/GUI/ConfigWizard.cpp:1189
msgid "Simple mode"
msgstr "Eenvoudige modus"

#: src/slic3r/GUI/ConfigWizard.cpp:1190
msgid "Advanced mode"
msgstr "Geavanceerde modus"

#: src/slic3r/GUI/ConfigWizard.cpp:1191
msgid "Expert mode"
msgstr "Expertmodus"

#: src/slic3r/GUI/ConfigWizard.cpp:1197
msgid "The size of the object can be specified in inches"
msgstr "De maten van het object kunnen worden ingesteld op inches"

#: src/slic3r/GUI/ConfigWizard.cpp:1198
msgid "Use inches"
msgstr "Gebruik inches"

#: src/slic3r/GUI/ConfigWizard.cpp:1232
msgid "Other Vendors"
msgstr "Overige leveranciers"

#: src/slic3r/GUI/ConfigWizard.cpp:1236
#, c-format
msgid "Pick another vendor supported by %s"
msgstr "Kies een andere leverancier die ondersteund wordt door %s"

#: src/slic3r/GUI/ConfigWizard.cpp:1267
msgid "Firmware Type"
msgstr "Firmwaretype"

#: src/slic3r/GUI/ConfigWizard.cpp:1267 src/slic3r/GUI/Tab.cpp:2145
msgid "Firmware"
msgstr "Firmware"

#: src/slic3r/GUI/ConfigWizard.cpp:1271
msgid "Choose the type of firmware used by your printer."
msgstr "Kies het type firmware dat de printer gebruikt."

#: src/slic3r/GUI/ConfigWizard.cpp:1305
msgid "Bed Shape and Size"
msgstr "Bedvorm en -grootte"

#: src/slic3r/GUI/ConfigWizard.cpp:1308
msgid "Set the shape of your printer's bed."
msgstr "Stel de vorm van het printbed in."

#: src/slic3r/GUI/ConfigWizard.cpp:1328
msgid "Filament and Nozzle Diameters"
msgstr "Filament en nozzle diameters"

#: src/slic3r/GUI/ConfigWizard.cpp:1328
msgid "Print Diameters"
msgstr "Printdiameter"

#: src/slic3r/GUI/ConfigWizard.cpp:1342
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "Voer de diameter van de nozzle in."

#: src/slic3r/GUI/ConfigWizard.cpp:1345
msgid "Nozzle Diameter:"
msgstr "Nozzlediameter:"

#: src/slic3r/GUI/ConfigWizard.cpp:1355
msgid "Enter the diameter of your filament."
msgstr "Voer de diameter van het filament in."

#: src/slic3r/GUI/ConfigWizard.cpp:1356
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"Goede nauwkeurigheid is van belang. Gebruik dus een schuifmaat en doe "
"verschillende metingen op het filament. Bereken dan het gemiddelde."

#: src/slic3r/GUI/ConfigWizard.cpp:1359
msgid "Filament Diameter:"
msgstr "Filamentdiameter:"

#: src/slic3r/GUI/ConfigWizard.cpp:1393
msgid "Nozzle and Bed Temperatures"
msgstr "Nozzle- en bedtemperaturen"

#: src/slic3r/GUI/ConfigWizard.cpp:1393
msgid "Temperatures"
msgstr "Temperaturen"

#: src/slic3r/GUI/ConfigWizard.cpp:1409
msgid "Enter the temperature needed for extruding your filament."
msgstr "Voer de temperatuur in die nodig is om filament te extruderen."

#: src/slic3r/GUI/ConfigWizard.cpp:1410
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "Een vuistregel is 180 tot 230 °C voor PLA en 230 tot 260 °C voor ABS."

#: src/slic3r/GUI/ConfigWizard.cpp:1413
msgid "Extrusion Temperature:"
msgstr "Extrusietemperatuur:"

#: src/slic3r/GUI/ConfigWizard.cpp:1414 src/slic3r/GUI/ConfigWizard.cpp:1428
#: src/libslic3r/PrintConfig.cpp:187 src/libslic3r/PrintConfig.cpp:919
#: src/libslic3r/PrintConfig.cpp:963 src/libslic3r/PrintConfig.cpp:2200
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:1423
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""
"Voer de bedtemperatuur in die nodig is om filament aan het bed te laten "
"hechten."

#: src/slic3r/GUI/ConfigWizard.cpp:1424
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"Een vuistregel is 60 °C voor PLA en 110 °C voor ABS. Laat op 0 staan als er "
"geen verwarmd bed is."

#: src/slic3r/GUI/ConfigWizard.cpp:1427
msgid "Bed Temperature:"
msgstr "Bedtemperatuur:"

#: src/slic3r/GUI/ConfigWizard.cpp:1882 src/slic3r/GUI/ConfigWizard.cpp:2534
msgid "Filaments"
msgstr "Filamenten"

#: src/slic3r/GUI/ConfigWizard.cpp:1882 src/slic3r/GUI/ConfigWizard.cpp:2536
msgid "SLA Materials"
msgstr "SLA materialen"

#: src/slic3r/GUI/ConfigWizard.cpp:1936
msgid "FFF Technology Printers"
msgstr "FFF-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:1941
msgid "SLA Technology Printers"
msgstr "SLA-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:2247 src/slic3r/GUI/DoubleSlider.cpp:2133
#: src/slic3r/GUI/DoubleSlider.cpp:2153 src/slic3r/GUI/GUI.cpp:244
msgid "Notice"
msgstr "Let op"

#: src/slic3r/GUI/ConfigWizard.cpp:2267
msgid "The following FFF printer models have no filament selected:"
msgstr "Er is geen filament geselecteerd voor de volgende FFF-printers:"

#: src/slic3r/GUI/ConfigWizard.cpp:2271
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr "Wil je standaardfilamenten selecteren voor deze FFF-printers?"

#: src/slic3r/GUI/ConfigWizard.cpp:2285
msgid "The following SLA printer models have no materials selected:"
msgstr "Er is geen materiaal geselecteerd voor de volgende SLA-printers:"

#: src/slic3r/GUI/ConfigWizard.cpp:2289
msgid "Do you want to select default SLA materials for these printer models?"
msgstr "Wil je standard SLA-materialen selecteren voor deze printers?"

#: src/slic3r/GUI/ConfigWizard.cpp:2497
msgid "Select all standard printers"
msgstr "Select alle standaardprinters"

#: src/slic3r/GUI/ConfigWizard.cpp:2500
msgid "< &Back"
msgstr "< &Terug"

#: src/slic3r/GUI/ConfigWizard.cpp:2501
msgid "&Next >"
msgstr "&Volgende >"

#: src/slic3r/GUI/ConfigWizard.cpp:2502
msgid "&Finish"
msgstr "&Voltooi"

#: src/slic3r/GUI/ConfigWizard.cpp:2503 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:644
msgid "Cancel"
msgstr "Annuleren"

#: src/slic3r/GUI/ConfigWizard.cpp:2516
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:2519
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA-printers"

#: src/slic3r/GUI/ConfigWizard.cpp:2534
msgid "Filament Profiles Selection"
msgstr "Filament profielselectie"

#: src/slic3r/GUI/ConfigWizard.cpp:2534 src/slic3r/GUI/ConfigWizard.cpp:2536
#: src/slic3r/GUI/GUI_ObjectList.cpp:4016
msgid "Type:"
msgstr "Type:"

#: src/slic3r/GUI/ConfigWizard.cpp:2536
msgid "SLA Material Profiles Selection"
msgstr "SLA-materiaal profielselectie"

#: src/slic3r/GUI/ConfigWizard.cpp:2634
msgid "Configuration Assistant"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:2635
msgid "Configuration &Assistant"
msgstr "Configuratie-&assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:2637
msgid "Configuration Wizard"
msgstr "Configuratie-assistent"

#: src/slic3r/GUI/ConfigWizard.cpp:2638
msgid "Configuration &Wizard"
msgstr "Configuratie-&assistent"

#: src/slic3r/GUI/DoubleSlider.cpp:106
msgid "Place bearings in slots and resume printing"
msgstr "Plaats lagers in gleuven en ga door met printen"

#: src/slic3r/GUI/DoubleSlider.cpp:1075
msgid "One layer mode"
msgstr "Enkele-laagsmodus"

#: src/slic3r/GUI/DoubleSlider.cpp:1077
msgid "Discard all custom changes"
msgstr "Verwijder alle wijzigingen"

#: src/slic3r/GUI/DoubleSlider.cpp:1082 src/slic3r/GUI/DoubleSlider.cpp:1863
msgid "Jump to move"
msgstr "Ga naar beweging"

#: src/slic3r/GUI/DoubleSlider.cpp:1086
#, c-format
msgid "Jump to height %s or Set extruder sequence for the entire print"
msgstr "Ga naar hoogte %s, of stel extrudervolgorde in voor de hele print"

#: src/slic3r/GUI/DoubleSlider.cpp:1088 src/slic3r/GUI/DoubleSlider.cpp:1732
#: src/slic3r/GUI/DoubleSlider.cpp:1863 src/slic3r/GUI/DoubleSlider.cpp:1867
msgid "Jump to height"
msgstr "G naar hoogte"

#: src/slic3r/GUI/DoubleSlider.cpp:1094
msgid "Edit current color - Right click the colored slider segment"
msgstr ""
"Huidige kleur aanpassen - rechtermuisklik op het gekleurde schuifsegment"

#: src/slic3r/GUI/DoubleSlider.cpp:1104
msgid "Print mode"
msgstr "Printmodus"

#: src/slic3r/GUI/DoubleSlider.cpp:1118
msgid "Add extruder change - Left click"
msgstr "Voeg extruderwissel toe - linkermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1120
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""
"Kleurwissel toevoegen: linkermuisklik voor ingestelde kleur of shift + "
"linkermuisklik voor aangepaste kleurselectie"

#: src/slic3r/GUI/DoubleSlider.cpp:1122
msgid "Add color change - Left click"
msgstr "Kleurwissel toevoegen: linkermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1123
msgid "or press \"+\" key"
msgstr "of druk op de \"+\"-toets"

#: src/slic3r/GUI/DoubleSlider.cpp:1125
msgid "Add another code - Ctrl + Left click"
msgstr "Voeg andere code toe: Ctrl + linkermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1126
msgid "Add another code - Right click"
msgstr "Voeg andere code toe: rechtermuisklik"

#: src/slic3r/GUI/DoubleSlider.cpp:1132
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Het achtereenvolgens printen staat aan.\n"
"Het is niet mogelijk om custom G-codes aan objecten toe te voegen voor het "
"achtereenvolgens printen.\n"
"Deze code wordt niet uitgevoerd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1141
msgid "Color change (\"%1%\")"
msgstr "Kleurwissel (%1%)"

#: src/slic3r/GUI/DoubleSlider.cpp:1142
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr "Kleurwissel (%1%) voor extruder %2%"

#: src/slic3r/GUI/DoubleSlider.cpp:1144
msgid "Pause print (\"%1%\")"
msgstr "Pauzeer print (%1%)"

#: src/slic3r/GUI/DoubleSlider.cpp:1146
msgid "Custom template (\"%1%\")"
msgstr "Aangepaste template (\"%1%\")"

#: src/slic3r/GUI/DoubleSlider.cpp:1148
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr "Extruder (tool) is veranderd naar extruder %1%"

#: src/slic3r/GUI/DoubleSlider.cpp:1155
msgid "Note"
msgstr "Let op"

#: src/slic3r/GUI/DoubleSlider.cpp:1157
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""
"De G-code die is gekoppeld aan deze markering is in strijd met de "
"printmodus.\n"
"Dit aanpassen zal de gegevens van de schuif ook wijzigen."

#: src/slic3r/GUI/DoubleSlider.cpp:1160
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Er is een kleurwissel voor een extruder die niet wordt gebruikt tot het eind "
"van de print.\n"
"Deze code wordt niet toegevoegd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1163
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""
"Er is een extruderwissel naar dezelfde extruder ingesteld.\n"
"Deze code wordt niet toegevoegd bij de generatie van de G-code."

#: src/slic3r/GUI/DoubleSlider.cpp:1166
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""
"Er is een kleurwissel voor een extruder die niet eerder gebruikt is.\n"
"Controleer de instellingen om overbodige kleurwisselingen te voorkomen."

#: src/slic3r/GUI/DoubleSlider.cpp:1171
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr "Verwijder markering; linkermuisknop of druk op de '-'-knop"

#: src/slic3r/GUI/DoubleSlider.cpp:1173
msgid "Edit tick mark - Ctrl + Left click"
msgstr "Bewerk markering; CTRL + linkermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:1174
msgid "Edit tick mark - Right click"
msgstr "Bewerk markering; rechtermuisknop"

#: src/slic3r/GUI/DoubleSlider.cpp:1274 src/slic3r/GUI/DoubleSlider.cpp:1308
#: src/slic3r/GUI/GLCanvas3D.cpp:980 src/slic3r/GUI/GUI_ObjectList.cpp:1832
#: src/slic3r/GUI/Tab.cpp:2500
#, c-format
msgid "Extruder %d"
msgstr "Extruder %d"

#: src/slic3r/GUI/DoubleSlider.cpp:1275 src/slic3r/GUI/GUI_ObjectList.cpp:1833
msgid "active"
msgstr "actief"

#: src/slic3r/GUI/DoubleSlider.cpp:1284
msgid "Switch code to Change extruder"
msgstr "Code om van extruder te wisselen"

#: src/slic3r/GUI/DoubleSlider.cpp:1284 src/slic3r/GUI/GUI_ObjectList.cpp:1800
msgid "Change extruder"
msgstr "Wissel extruder"

#: src/slic3r/GUI/DoubleSlider.cpp:1285
msgid "Change extruder (N/A)"
msgstr "Wissel extruder (n.v.t.)"

#: src/slic3r/GUI/DoubleSlider.cpp:1287
msgid "Use another extruder"
msgstr "Gebruik een andere extruder"

#: src/slic3r/GUI/DoubleSlider.cpp:1309
msgid "used"
msgstr "gebruikt"

#: src/slic3r/GUI/DoubleSlider.cpp:1317
msgid "Switch code to Color change (%1%) for:"
msgstr "Code om naar kleur %1% te wisselen voor:"

#: src/slic3r/GUI/DoubleSlider.cpp:1318
msgid "Add color change (%1%) for:"
msgstr "Kleurwissel (%1%) toevoegen voor:"

#: src/slic3r/GUI/DoubleSlider.cpp:1676
msgid "Add color change"
msgstr "Kleurwissel toevoegen"

#: src/slic3r/GUI/DoubleSlider.cpp:1686
msgid "Add pause print"
msgstr "Voeg printpauze toe"

#: src/slic3r/GUI/DoubleSlider.cpp:1690
msgid "Add custom template"
msgstr "Voeg aangepaste template toe"

#: src/slic3r/GUI/DoubleSlider.cpp:1693
msgid "Add custom G-code"
msgstr "Custom G-code toevoegen"

#: src/slic3r/GUI/DoubleSlider.cpp:1711
msgid "Edit color"
msgstr "Bewerk kleur"

#: src/slic3r/GUI/DoubleSlider.cpp:1712
msgid "Edit pause print message"
msgstr "Bewerk printpauze-bericht"

#: src/slic3r/GUI/DoubleSlider.cpp:1713
msgid "Edit custom G-code"
msgstr "Bewerk custom G-code"

#: src/slic3r/GUI/DoubleSlider.cpp:1719
msgid "Delete color change"
msgstr "Verwijder kleurwissel"

#: src/slic3r/GUI/DoubleSlider.cpp:1720
msgid "Delete tool change"
msgstr "Verwijder toolwissel"

#: src/slic3r/GUI/DoubleSlider.cpp:1721
msgid "Delete pause print"
msgstr "Verwijder printpauze"

#: src/slic3r/GUI/DoubleSlider.cpp:1722
msgid "Delete custom G-code"
msgstr "Verwijder custom G-code"

#: src/slic3r/GUI/DoubleSlider.cpp:1739
msgid "Set extruder sequence for the entire print"
msgstr "Stel extrudervolgorde in voor de hele print"

#: src/slic3r/GUI/DoubleSlider.cpp:1825
msgid "Enter custom G-code used on current layer"
msgstr "Voer custom G-code in voor de huidige laag"

#: src/slic3r/GUI/DoubleSlider.cpp:1826
msgid "Custom G-code on current layer (%1% mm)."
msgstr "Custom G-code voor huidige laag (%1% mm)."

#: src/slic3r/GUI/DoubleSlider.cpp:1841
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""
"Voer een kort bericht in om te tonen op het printscherm tijdens een pauze"

#: src/slic3r/GUI/DoubleSlider.cpp:1842
msgid "Message for pause print on current layer (%1% mm)."
msgstr "Kort bericht voor printpauze bij huidige laag (%1% mm)."

#: src/slic3r/GUI/DoubleSlider.cpp:1862
msgid "Enter the move you want to jump to"
msgstr "Voer de beweging in waar u naartoe wilt"

#: src/slic3r/GUI/DoubleSlider.cpp:1862 src/slic3r/GUI/DoubleSlider.cpp:1866
msgid "Enter the height you want to jump to"
msgstr "Voer de hoogte in waar u naartoe wilt"

#: src/slic3r/GUI/DoubleSlider.cpp:2127
msgid "The last color change data was saved for a single extruder printing."
msgstr ""
"De laatste gegevens van de kleurwissel zijn opgeslagen voor enkel-"
"extruderprinters."

#: src/slic3r/GUI/DoubleSlider.cpp:2128 src/slic3r/GUI/DoubleSlider.cpp:2143
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""
"De laatste gegevens van de kleurwissel zijn opgeslagen voor een multi-"
"extruderprinter."

#: src/slic3r/GUI/DoubleSlider.cpp:2130
msgid "Your current changes will delete all saved color changes."
msgstr "De huidige wijzigingen zullen alle kleurwisselingen verwijderen."

#: src/slic3r/GUI/DoubleSlider.cpp:2131 src/slic3r/GUI/DoubleSlider.cpp:2151
msgid "Are you sure you want to continue?"
msgstr "Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/DoubleSlider.cpp:2144
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""
"Selecteer JA als u alle toolwisselingen wil opslaan,\n"
"of NEE als u alle toolwisselingen wilt veranderen in kleurwisselingen\n"
"of klik op annuleren om wijzingen ongedaan te maken."

#: src/slic3r/GUI/DoubleSlider.cpp:2147
msgid "Do you want to delete all saved tool changes?"
msgstr "Wilt u alle opgeslagen toolwisselingen verwijderen?"

#: src/slic3r/GUI/DoubleSlider.cpp:2149
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""
"De laatste gegevens van de kleurwisseling zijn opgeslagen voor een multi-"
"extruderprinter met toolwisselingen voor de hele print."

#: src/slic3r/GUI/DoubleSlider.cpp:2150
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""
"De huidige wijzigingen worden verwijderd voor alle extruder "
"(tool)wisselingen."

#: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:496
#: src/slic3r/GUI/GUI_ObjectList.cpp:508 src/slic3r/GUI/GUI_ObjectList.cpp:1015
#: src/slic3r/GUI/GUI_ObjectList.cpp:4454
#: src/slic3r/GUI/GUI_ObjectList.cpp:4464
#: src/slic3r/GUI/GUI_ObjectList.cpp:4499
#: src/slic3r/GUI/ObjectDataViewModel.cpp:209
#: src/slic3r/GUI/ObjectDataViewModel.cpp:266
#: src/slic3r/GUI/ObjectDataViewModel.cpp:291
#: src/slic3r/GUI/ObjectDataViewModel.cpp:499
msgid "default"
msgstr "standaard"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
msgid "Set extruder sequence"
msgstr "Stel extrudervolgorde in"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:39
msgid "Set extruder change for every"
msgstr "Stel toolwissel in voor elke"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
#: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:1047
#: src/libslic3r/PrintConfig.cpp:1624 src/libslic3r/PrintConfig.cpp:1789
#: src/libslic3r/PrintConfig.cpp:1856 src/libslic3r/PrintConfig.cpp:2063
#: src/libslic3r/PrintConfig.cpp:2109
msgid "layers"
msgstr "lagen"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:136
msgid "Set extruder(tool) sequence"
msgstr "Stel toolvolgorde in"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:182
msgid "Remove extruder from sequence"
msgstr "Verwijder extruder uit de reeks"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:192
msgid "Add extruder to sequence"
msgstr "Voeg extruder toe aan de reeks"

#: src/slic3r/GUI/Field.cpp:184
msgid "default value"
msgstr "standaardwaarde"

#: src/slic3r/GUI/Field.cpp:187
msgid "parameter name"
msgstr "parameternaam"

#: src/slic3r/GUI/Field.cpp:198 src/slic3r/GUI/OptionsGroup.cpp:774
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:874
msgid "N/A"
msgstr "n.v.t."

#: src/slic3r/GUI/Field.cpp:220
#, c-format
msgid "%s doesn't support percentage"
msgstr "%s ondersteunt geen percentage"

#: src/slic3r/GUI/Field.cpp:240 src/slic3r/GUI/Field.cpp:271
#: src/slic3r/GUI/Field.cpp:1417 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
msgid "Invalid numeric input."
msgstr "Ongeldige numerieke invoer."

#: src/slic3r/GUI/Field.cpp:249 src/slic3r/GUI/Field.cpp:1429
msgid "Input value is out of range"
msgstr "Ingevoerde waarde valt buiten het bereik"

#: src/slic3r/GUI/Field.cpp:285
#, c-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""
"Wordt %s%% bedoeld in plaats van %s %s?\n"
"Selecteer JA als de waarden aangepast moeten worden naar %s%%\n"
"of NEE als %s %s is de juiste waarde."

#: src/slic3r/GUI/Field.cpp:288
msgid "Parameter validation"
msgstr "Parametervalidatie"

#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr "Flash!"

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "Flashen in uitvoering. Ontkoppel de printer niet!"

#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr "Flashen mislukt"

#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr "Flashen succesvol!"

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr "Flashen mislukt. Check het AVRDUDE-logboek hieronder."

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr "Flashen geannuleerd."

#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"Dit HEX-bestand is niet geschikt voor deze printer.\n"
"Het HEX-bestand is bedoeld voor: %s\n"
"Geïdentificeerde printer: %s\n"
"\n"
"Weet u zeker dat u door wilt gaan met dit HEX-bestand?\n"
"Ga alleen door als u zeker weet dat dit juist is."

#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""
"Meerdere %s apparaten gevonden. Verbind één printer per keer voor het "
"flashen."

#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"Het %s apparaat is niet gevonden.\n"
"Klik op de reset-knop naast de USB-aansluiting als het apparaat is verbonden."

#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, c-format
msgid "The %s device could not have been found"
msgstr "Het %s apparaat kon niet gevonden worden"

#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, c-format
msgid "Error accessing port at %s: %s"
msgstr "Fout bij het openen van de poort op %s: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, c-format
msgid "Error: %s"
msgstr "Fout: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr "Firmwareflasher"

#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr "Firmwarebestand:"

#: src/slic3r/GUI/FirmwareDialog.cpp:805
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:289
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364
msgid "Browse"
msgstr "Zoek"

#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr "Seriële poort:"

#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr "Automatisch gedetecteerd"

#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr "Opnieuw scannen"

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr "Voortgang:"

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr "Status:"

#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr "Klaar"

#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr "Geavanceerd: Output logboek"

#: src/slic3r/GUI/FirmwareDialog.cpp:852
#: src/slic3r/GUI/Mouse3DController.cpp:552
#: src/slic3r/GUI/PrintHostDialogs.cpp:187
msgid "Close"
msgstr "Sluit"

#: src/slic3r/GUI/FirmwareDialog.cpp:902
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"Weet u zeker dat u het firmware flashen wilt stoppen?\n"
"Dit kan er voor zorgen dat de printer onbruikbaar wordt!"

#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid "Confirmation"
msgstr "Bevestiging"

#: src/slic3r/GUI/FirmwareDialog.cpp:906
msgid "Cancelling..."
msgstr "Annuleren..."

#: src/slic3r/GUI/GCodeViewer.cpp:221
msgid "Tool position"
msgstr "Toolpositie"

#: src/slic3r/GUI/GCodeViewer.cpp:965
msgid "Generating toolpaths"
msgstr "Toolpaden genereren"

#: src/slic3r/GUI/GCodeViewer.cpp:1356
msgid "Generating vertex buffer"
msgstr "Vertex buffer genereren"

#: src/slic3r/GUI/GCodeViewer.cpp:1437
msgid "Generating index buffers"
msgstr "Index buffers genereren"

#: src/slic3r/GUI/GCodeViewer.cpp:2163
msgid "Click to hide"
msgstr "Klik om te verbergen"

#: src/slic3r/GUI/GCodeViewer.cpp:2163
msgid "Click to show"
msgstr "Klik om te tonen"

#: src/slic3r/GUI/GCodeViewer.cpp:2275
msgid "up to"
msgstr "tot op"

#: src/slic3r/GUI/GCodeViewer.cpp:2281
msgid "above"
msgstr "boven"

#: src/slic3r/GUI/GCodeViewer.cpp:2289
msgid "from"
msgstr "vanaf"

#: src/slic3r/GUI/GCodeViewer.cpp:2289
msgid "to"
msgstr "naar"

#: src/slic3r/GUI/GCodeViewer.cpp:2317 src/slic3r/GUI/GCodeViewer.cpp:2325
#: src/slic3r/GUI/GUI_Preview.cpp:270 src/slic3r/GUI/GUI_Preview.cpp:788
msgid "Feature type"
msgstr "Type optie"

#: src/slic3r/GUI/GCodeViewer.cpp:2317 src/slic3r/GUI/GCodeViewer.cpp:2325
#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr "Tijd"

#: src/slic3r/GUI/GCodeViewer.cpp:2325
msgid "Percentage"
msgstr "Percentage"

#: src/slic3r/GUI/GCodeViewer.cpp:2328
msgid "Height (mm)"
msgstr "Hoogte (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:2329
msgid "Width (mm)"
msgstr "Breedte (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:2330
msgid "Speed (mm/s)"
msgstr "Snelheid (mm/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:2331
msgid "Fan Speed (%)"
msgstr "Ventilatorsnelheid (%)"

#: src/slic3r/GUI/GCodeViewer.cpp:2332
msgid "Volumetric flow rate (mm³/s)"
msgstr "Volumetrisch debiet (mm³/s)"

#: src/slic3r/GUI/GCodeViewer.cpp:2333 src/slic3r/GUI/GUI_Preview.cpp:276
#: src/slic3r/GUI/GUI_Preview.cpp:447 src/slic3r/GUI/GUI_Preview.cpp:694
#: src/slic3r/GUI/GUI_Preview.cpp:787 src/slic3r/GUI/GUI_Preview.cpp:1266
msgid "Tool"
msgstr "Tool"

#: src/slic3r/GUI/GCodeViewer.cpp:2334 src/slic3r/GUI/GUI_Preview.cpp:277
#: src/slic3r/GUI/GUI_Preview.cpp:785
msgid "Color Print"
msgstr "Kleurenprint"

#: src/slic3r/GUI/GCodeViewer.cpp:2370 src/slic3r/GUI/GCodeViewer.cpp:2405
#: src/slic3r/GUI/GCodeViewer.cpp:2410 src/slic3r/GUI/GUI_ObjectList.cpp:296
#: src/slic3r/GUI/wxExtensions.cpp:515 src/libslic3r/PrintConfig.cpp:530
msgid "Extruder"
msgstr "Extruder"

#: src/slic3r/GUI/GCodeViewer.cpp:2381
msgid "Default color"
msgstr "Standaardkleur"

#: src/slic3r/GUI/GCodeViewer.cpp:2405
msgid "default color"
msgstr "standaardkleur"

#: src/slic3r/GUI/GCodeViewer.cpp:2500 src/slic3r/GUI/GCodeViewer.cpp:2546
msgid "Color change"
msgstr "Kleurwissel"

#: src/slic3r/GUI/GCodeViewer.cpp:2519 src/slic3r/GUI/GCodeViewer.cpp:2544
msgid "Print"
msgstr "Print"

#: src/slic3r/GUI/GCodeViewer.cpp:2545 src/slic3r/GUI/GCodeViewer.cpp:2562
#: src/slic3r/GUI/Plater.cpp:1201
msgid "Pause"
msgstr "Pauzeer"

#: src/slic3r/GUI/GCodeViewer.cpp:2550 src/slic3r/GUI/GCodeViewer.cpp:2553
msgid "Event"
msgstr "Gebeurtenis"

#: src/slic3r/GUI/GCodeViewer.cpp:2550 src/slic3r/GUI/GCodeViewer.cpp:2553
msgid "Remaining time"
msgstr "Resterende tijd"

#: src/slic3r/GUI/GCodeViewer.cpp:2553
msgid "Duration"
msgstr "Duur"

#: src/slic3r/GUI/GCodeViewer.cpp:2588 src/slic3r/GUI/GUI_Preview.cpp:330
#: src/slic3r/GUI/GUI_Preview.cpp:1466 src/libslic3r/PrintConfig.cpp:2286
msgid "Travel"
msgstr "Beweging"

#: src/slic3r/GUI/GCodeViewer.cpp:2591
msgid "Movement"
msgstr "Beweging"

#: src/slic3r/GUI/GCodeViewer.cpp:2592
msgid "Extrusion"
msgstr "Extrusie"

#: src/slic3r/GUI/GCodeViewer.cpp:2593 src/slic3r/GUI/Tab.cpp:1680
#: src/slic3r/GUI/Tab.cpp:2550
msgid "Retraction"
msgstr "Retractie"

#: src/slic3r/GUI/GCodeViewer.cpp:2624 src/slic3r/GUI/GUI_Preview.cpp:315
#: src/slic3r/GUI/GUI_Preview.cpp:328
msgid "Options"
msgstr "Opties"

#: src/slic3r/GUI/GCodeViewer.cpp:2627 src/slic3r/GUI/GUI_Preview.cpp:331
#: src/slic3r/GUI/GUI_Preview.cpp:1467
msgid "Retractions"
msgstr "Retracties"

#: src/slic3r/GUI/GCodeViewer.cpp:2628 src/slic3r/GUI/GUI_Preview.cpp:332
#: src/slic3r/GUI/GUI_Preview.cpp:1468
msgid "Deretractions"
msgstr "Deretracties"

#: src/slic3r/GUI/GCodeViewer.cpp:2629 src/slic3r/GUI/GUI_Preview.cpp:1469
msgid "Tool changes"
msgstr "Toolwisselingen"

#: src/slic3r/GUI/GCodeViewer.cpp:2630 src/slic3r/GUI/GUI_Preview.cpp:1470
msgid "Color changes"
msgstr "Kleurwisselingen"

#: src/slic3r/GUI/GCodeViewer.cpp:2631 src/slic3r/GUI/GUI_Preview.cpp:1471
msgid "Print pauses"
msgstr "Printpauzes"

#: src/slic3r/GUI/GCodeViewer.cpp:2632 src/slic3r/GUI/GUI_Preview.cpp:1472
msgid "Custom G-codes"
msgstr "Aangepaste G-code"

#: src/slic3r/GUI/GCodeViewer.cpp:2643 src/slic3r/GUI/GCodeViewer.cpp:2667
#: src/slic3r/GUI/Plater.cpp:689 src/libslic3r/PrintConfig.cpp:113
msgid "Printer"
msgstr "Printer"

#: src/slic3r/GUI/GCodeViewer.cpp:2645 src/slic3r/GUI/GCodeViewer.cpp:2672
#: src/slic3r/GUI/Plater.cpp:685
msgid "Print settings"
msgstr "Printinstellingen"

#: src/slic3r/GUI/GCodeViewer.cpp:2648 src/slic3r/GUI/GCodeViewer.cpp:2678
#: src/slic3r/GUI/Plater.cpp:686 src/slic3r/GUI/Tab.cpp:1780
#: src/slic3r/GUI/Tab.cpp:1781
msgid "Filament"
msgstr "Filament"

#: src/slic3r/GUI/GCodeViewer.cpp:2701 src/slic3r/GUI/GCodeViewer.cpp:2706
#: src/slic3r/GUI/Plater.cpp:241 src/slic3r/GUI/Plater.cpp:1127
#: src/slic3r/GUI/Plater.cpp:1177 src/slic3r/GUI/Plater.cpp:1198
msgid "Estimated printing time"
msgstr "Geschatte printtijd"

#: src/slic3r/GUI/GCodeViewer.cpp:2701
msgid "Normal mode"
msgstr "Normale modus"

#: src/slic3r/GUI/GCodeViewer.cpp:2706
msgid "Stealth mode"
msgstr "Stille modus"

#: src/slic3r/GUI/GCodeViewer.cpp:2733
msgid "Show stealth mode"
msgstr "Toon stille modus"

#: src/slic3r/GUI/GCodeViewer.cpp:2737
msgid "Show normal mode"
msgstr "Toon normale modus"

#: src/slic3r/GUI/GLCanvas3D.cpp:228 src/slic3r/GUI/GLCanvas3D.cpp:4965
msgid "Variable layer height"
msgstr "Variabele laagdikte"

#: src/slic3r/GUI/GLCanvas3D.cpp:230
msgid "Left mouse button:"
msgstr "Linkermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:232
msgid "Add detail"
msgstr "Voeg detail toe"

#: src/slic3r/GUI/GLCanvas3D.cpp:234
msgid "Right mouse button:"
msgstr "Rechtermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:236
msgid "Remove detail"
msgstr "Verwijder detail"

#: src/slic3r/GUI/GLCanvas3D.cpp:238
msgid "Shift + Left mouse button:"
msgstr "Shift + linkermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:240
msgid "Reset to base"
msgstr "Reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:242
msgid "Shift + Right mouse button:"
msgstr "Shift + rechtermuisknop:"

#: src/slic3r/GUI/GLCanvas3D.cpp:244
msgid "Smoothing"
msgstr "Egaliseren"

#: src/slic3r/GUI/GLCanvas3D.cpp:246
msgid "Mouse wheel:"
msgstr "Scrollwieltje:"

#: src/slic3r/GUI/GLCanvas3D.cpp:248
msgid "Increase/decrease edit area"
msgstr "Vergroot/verklein bewerkgebied"

#: src/slic3r/GUI/GLCanvas3D.cpp:251
msgid "Adaptive"
msgstr "Adaptief"

#: src/slic3r/GUI/GLCanvas3D.cpp:257
msgid "Quality / Speed"
msgstr "Kwaliteit / Snelheid"

#: src/slic3r/GUI/GLCanvas3D.cpp:260
msgid "Higher print quality versus higher print speed."
msgstr "Hogere printkwaliteit tegenover een hogere printsnelheid."

#: src/slic3r/GUI/GLCanvas3D.cpp:271
msgid "Smooth"
msgstr "Egaliseer"

#: src/slic3r/GUI/GLCanvas3D.cpp:277 src/libslic3r/PrintConfig.cpp:554
msgid "Radius"
msgstr "Radius"

#: src/slic3r/GUI/GLCanvas3D.cpp:287
msgid "Keep min"
msgstr "Behoud min"

#: src/slic3r/GUI/GLCanvas3D.cpp:296
msgid "Reset"
msgstr "Reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:562
msgid "Variable layer height - Manual edit"
msgstr "Variabele laagdikte - handmatig bewerken"

#: src/slic3r/GUI/GLCanvas3D.cpp:630
msgid "An object outside the print area was detected."
msgstr "Er is een object buiten het printbereik gedetecteerd."

#: src/slic3r/GUI/GLCanvas3D.cpp:631
msgid "A toolpath outside the print area was detected."
msgstr "Er is een toolpad buiten het printbereik gedetecteerd."

#: src/slic3r/GUI/GLCanvas3D.cpp:632
msgid "SLA supports outside the print area were detected."
msgstr "Er zijn SLA-supports buiten het printbereik gedetecteerd."

#: src/slic3r/GUI/GLCanvas3D.cpp:633
msgid "Some objects are not visible."
msgstr "Sommige objecten zijn niet zichtbaar."

#: src/slic3r/GUI/GLCanvas3D.cpp:635
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""
"Er is een object buiten het printbereik gedetecteerd.\n"
"Los het probleem op om door te gaan met slicen."

#: src/slic3r/GUI/GLCanvas3D.cpp:907 src/slic3r/GUI/GLCanvas3D.cpp:936
msgid "Default print color"
msgstr "Standaard printkleur"

#: src/slic3r/GUI/GLCanvas3D.cpp:937 src/slic3r/GUI/GLCanvas3D.cpp:946
#: src/slic3r/GUI/GLCanvas3D.cpp:985
msgid "Pause print or custom G-code"
msgstr "Pauzeer de print of voer custom G-code in"

#: src/slic3r/GUI/GLCanvas3D.cpp:958
#, c-format
msgid "up to %.2f mm"
msgstr "tot %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:962
#, c-format
msgid "above %.2f mm"
msgstr "boven %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:966
#, c-format
msgid "%.2f - %.2f mm"
msgstr "%.2f - %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:998
#, c-format
msgid "Color change for Extruder %d at %.2f mm"
msgstr "Kleurwissel voor extruder %d op %.2f mm"

#: src/slic3r/GUI/GLCanvas3D.cpp:1309
msgid "Seq."
msgstr "Volg."

#: src/slic3r/GUI/GLCanvas3D.cpp:1776
msgid "Variable layer height - Reset"
msgstr "Variabele laagdikte - reset"

#: src/slic3r/GUI/GLCanvas3D.cpp:1784
msgid "Variable layer height - Adaptive"
msgstr "Variabele laagdikte - adaptief"

#: src/slic3r/GUI/GLCanvas3D.cpp:1792
msgid "Variable layer height - Smooth all"
msgstr "Variable laagdikte - egaliseer alles"

#: src/slic3r/GUI/GLCanvas3D.cpp:2228
msgid "Mirror Object"
msgstr "Spiegel object"

#: src/slic3r/GUI/GLCanvas3D.cpp:3191
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
msgid "Gizmo-Move"
msgstr "Verplaatsen"

#: src/slic3r/GUI/GLCanvas3D.cpp:3275
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522
msgid "Gizmo-Rotate"
msgstr "Roteren"

#: src/slic3r/GUI/GLCanvas3D.cpp:3802
msgid "Move Object"
msgstr "Verplaats object"

#: src/slic3r/GUI/GLCanvas3D.cpp:4289 src/slic3r/GUI/GLCanvas3D.cpp:4926
msgid "Switch to Settings"
msgstr "Schakel over naar instellingen"

#: src/slic3r/GUI/GLCanvas3D.cpp:4290 src/slic3r/GUI/GLCanvas3D.cpp:4926
msgid "Print Settings Tab"
msgstr "Printinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4291 src/slic3r/GUI/GLCanvas3D.cpp:4927
msgid "Filament Settings Tab"
msgstr "Filamentinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4291 src/slic3r/GUI/GLCanvas3D.cpp:4927
msgid "Material Settings Tab"
msgstr "Materiaalinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4292 src/slic3r/GUI/GLCanvas3D.cpp:4928
msgid "Printer Settings Tab"
msgstr "Printerinstellingentab"

#: src/slic3r/GUI/GLCanvas3D.cpp:4348
msgid "Undo History"
msgstr "Geschiedenis ongedaan maken"

#: src/slic3r/GUI/GLCanvas3D.cpp:4348
msgid "Redo History"
msgstr "Geschiedenis opnieuw doen"

#: src/slic3r/GUI/GLCanvas3D.cpp:4369
#, c-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] "Maak %1$d actie ongedaan"
msgstr[1] "Maak %1$d acties ongedaan"

#: src/slic3r/GUI/GLCanvas3D.cpp:4369
#, c-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] "Doe %1$d actie opnieuw"
msgstr[1] "Doe %1$d acties opnieuw"

#: src/slic3r/GUI/GLCanvas3D.cpp:4389 src/slic3r/GUI/GLCanvas3D.cpp:4944
#: src/slic3r/GUI/KBShortcutsDialog.cpp:130 src/slic3r/GUI/Search.cpp:426
msgid "Search"
msgstr "Zoek"

#: src/slic3r/GUI/GLCanvas3D.cpp:4403 src/slic3r/GUI/GLCanvas3D.cpp:4411
#: src/slic3r/GUI/Search.cpp:433
msgid "Enter a search term"
msgstr "Voer een zoekterm in"

#: src/slic3r/GUI/GLCanvas3D.cpp:4820
msgid "Add..."
msgstr "Voeg toe..."

#: src/slic3r/GUI/GLCanvas3D.cpp:4828 src/slic3r/GUI/GUI_ObjectList.cpp:1846
#: src/slic3r/GUI/Plater.cpp:3950 src/slic3r/GUI/Plater.cpp:3972
#: src/slic3r/GUI/Tab.cpp:3447
msgid "Delete"
msgstr "Verwijder"

#: src/slic3r/GUI/GLCanvas3D.cpp:4837 src/slic3r/GUI/KBShortcutsDialog.cpp:124
#: src/slic3r/GUI/Plater.cpp:4882
msgid "Delete all"
msgstr "Verwijder alles"

#: src/slic3r/GUI/GLCanvas3D.cpp:4846 src/slic3r/GUI/KBShortcutsDialog.cpp:151
#: src/slic3r/GUI/Plater.cpp:1633
msgid "Arrange"
msgstr "Schikken"

#: src/slic3r/GUI/GLCanvas3D.cpp:4846 src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Arrange selection"
msgstr "Schik selectie"

#: src/slic3r/GUI/GLCanvas3D.cpp:4858
msgid "Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/GLCanvas3D.cpp:4867
msgid "Paste"
msgstr "Plak"

#: src/slic3r/GUI/GLCanvas3D.cpp:4879 src/slic3r/GUI/Plater.cpp:3809
#: src/slic3r/GUI/Plater.cpp:3821 src/slic3r/GUI/Plater.cpp:3959
msgid "Add instance"
msgstr "Voeg instantie toe"

#: src/slic3r/GUI/GLCanvas3D.cpp:4890 src/slic3r/GUI/Plater.cpp:3961
msgid "Remove instance"
msgstr "Verwijder instantie"

#: src/slic3r/GUI/GLCanvas3D.cpp:4903
msgid "Split to objects"
msgstr "Verdeel in objecten"

#: src/slic3r/GUI/GLCanvas3D.cpp:4913 src/slic3r/GUI/GUI_ObjectList.cpp:1618
msgid "Split to parts"
msgstr "Verdeel in onderdelen"

#: src/slic3r/GUI/GLCanvas3D.cpp:5015 src/slic3r/GUI/KBShortcutsDialog.cpp:125
#: src/slic3r/GUI/MainFrame.cpp:1199
msgid "Undo"
msgstr "Maak ongedaan"

#: src/slic3r/GUI/GLCanvas3D.cpp:5015 src/slic3r/GUI/GLCanvas3D.cpp:5054
msgid "Click right mouse button to open/close History"
msgstr "Rechtermuisklik om geschiedenis te openen/sluiten"

#: src/slic3r/GUI/GLCanvas3D.cpp:5038
msgid "Next Undo action: %1%"
msgstr "Volgende ongedaan maken: %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:5054 src/slic3r/GUI/KBShortcutsDialog.cpp:126
#: src/slic3r/GUI/MainFrame.cpp:1202
msgid "Redo"
msgstr "Doe opnieuw"

#: src/slic3r/GUI/GLCanvas3D.cpp:5076
msgid "Next Redo action: %1%"
msgstr "Volgende opnieuw doen: %1%"

#: src/slic3r/GUI/GLCanvas3D.cpp:7179
msgid "Selection-Add from rectangle"
msgstr "Selectie - Voeg toe van boxselectie"

#: src/slic3r/GUI/GLCanvas3D.cpp:7198
msgid "Selection-Remove from rectangle"
msgstr "Selectie - Verwijder van boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:3593
msgid "Cut"
msgstr "Snij door"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
msgid "Keep upper part"
msgstr "Behoud bovenste deel"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171
msgid "Keep lower part"
msgstr "Behoud onderste deel"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172
msgid "Rotate lower part upwards"
msgstr "Roteer onderste deel naar boven"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177
msgid "Perform cut"
msgstr "Uitsnede toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
msgid "Paint-on supports"
msgstr "Inkleur-supports"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
msgid "Clipping of view"
msgstr "Weergave samenvoegen"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
msgid "Reset direction"
msgstr "Reset-richting"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27
msgid "Brush size"
msgstr "Penseelgrootte"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28
msgid "Brush shape"
msgstr "Penseelvorm"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29
msgid "Left mouse button"
msgstr "Linkermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "Enforce supports"
msgstr "Forceer supportmateriaal"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
msgid "Right mouse button"
msgstr "Rechtermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:373
msgid "Block supports"
msgstr "Blokkeer supportmateriaal"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Shift + Left mouse button"
msgstr "Shift + linkermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:368
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:378
msgid "Remove selection"
msgstr "Verwijder selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Remove all selection"
msgstr "Verwijder alle selecties"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
msgid "Circle"
msgstr "Cirkel"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
msgid "Sphere"
msgstr "Bol"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:129
msgid "Autoset by angle"
msgstr "Stel in op basis van hoek"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:118
msgid "Reset selection"
msgstr "Reset selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
msgid "Alt + Mouse wheel"
msgstr "Alt + scrollwieltje"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:159
msgid "Paints all facets inside, regardless of their orientation."
msgstr "Kleurt alle binnenfacetten, onafhankelijk van hun oriëntatie."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:173
msgid "Ignores facets facing away from the camera."
msgstr "Negeer facetten die niet in beeld zijn."

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:203
msgid "Ctrl + Mouse wheel"
msgstr "Ctrl + scrollwieltje"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233
msgid "Autoset custom supports"
msgstr "Custom support automatisch instellen"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235
msgid "Threshold:"
msgstr "Drempelwaarde:"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242
msgid "Enforce"
msgstr "Forceer"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245
msgid "Block"
msgstr "Blokkeer"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:295
msgid "Block supports by angle"
msgstr "Blokkeer supports op basis van hoek"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:296
msgid "Add supports by angle"
msgstr "Voeg supports to op basis van hoek"

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40
msgid "Place on face"
msgstr "Plaats op vlak"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
msgid "Hollow this object"
msgstr "Dit object uithollen"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Preview hollowed and drilled model"
msgstr "Toon voorbeeld van uitgehold model met gat"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
msgid "Offset"
msgstr "Shelldikte"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56
msgid "Quality"
msgstr "Kwaliteit"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
#: src/libslic3r/PrintConfig.cpp:3089
msgid "Closing distance"
msgstr "Sluitafstand"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
msgid "Hole diameter"
msgstr "Gatdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
msgid "Hole depth"
msgstr "Gatdiepte"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
msgid "Remove selected holes"
msgstr "Verwijder geselecteerde gaten"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
msgid "Remove all holes"
msgstr "Verwijder alle gaten"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
msgid "Show supports"
msgstr "Toon support"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308
msgid "Add drainage hole"
msgstr "Voeg afvoergat toe"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424
msgid "Delete drainage hole"
msgstr "Verwijder afvoergat"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624
msgid "Hollowing parameter change"
msgstr "Wijziging van uitholparameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693
msgid "Change drainage hole diameter"
msgstr "Verander afvoergatdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785
msgid "Hollow and drill"
msgstr "Uithollen en gat toevoegen"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835
msgid "Move drainage hole"
msgstr "Verplaats afvoergat"

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64
msgid "Move"
msgstr "Verplaats"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
#: src/libslic3r/PrintConfig.cpp:3642
msgid "Rotate"
msgstr "Roteer"

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
#: src/libslic3r/PrintConfig.cpp:3657
msgid "Scale"
msgstr "Verschaal"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:381
msgid "Enforce seam"
msgstr "Forceer naad"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:383
msgid "Block seam"
msgstr "Blokkeer naad"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46
msgid "Seam painting"
msgstr "Naad kleuren"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
msgid "Head diameter"
msgstr "Kopdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Lock supports under new islands"
msgstr "Vergrendel support onder nieuwe eilanden"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
msgid "Remove selected points"
msgstr "Verwijder geselecteerde punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
msgid "Remove all points"
msgstr "Verwijder alle punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
msgid "Apply changes"
msgstr "Wijzigingen toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
msgid "Discard changes"
msgstr "Wijzigingen afwijzen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
msgid "Minimal points distance"
msgstr "Minimale puntafstand"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
#: src/libslic3r/PrintConfig.cpp:2919
msgid "Support points density"
msgstr "Dichtheid van supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
msgid "Auto-generate points"
msgstr "Genereer automatisch punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
msgid "Manual editing"
msgstr "Handmatig bewerken"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374
msgid "Add support point"
msgstr "Voeg supportpunt toe"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514
msgid "Delete support point"
msgstr "Verwijder supportpunt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694
msgid "Change point head diameter"
msgstr "Wijzig puntkopdiameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762
msgid "Support parameter change"
msgstr "Wijzig supportparameter"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869
msgid "SLA Support Points"
msgstr "SLA-supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
msgid "SLA gizmo turned on"
msgstr "SLA-bewerker aangezet"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911
msgid "Do you want to save your manually edited support points?"
msgstr "Wilt u handmatig aangepaste supportpunten opslaan?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912
msgid "Save changes?"
msgstr "Wijzigingen opslaan?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924
msgid "SLA gizmo turned off"
msgstr "SLA-bewerker uitgezet"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955
msgid "Move support point"
msgstr "Verplaats supportpunt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048
msgid "Support points edit"
msgstr "Bewerk supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127
msgid "Autogeneration will erase all manually edited points."
msgstr ""
"Automatisch genereren zal alle handmatig aangepaste punten verwijderen."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128
msgid "Are you sure you want to do it?"
msgstr "Weet u zeker dat u dit wilt doen?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 src/slic3r/GUI/GUI.cpp:256
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:557
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:581
#: src/slic3r/GUI/WipeTowerDialog.cpp:45 src/slic3r/GUI/WipeTowerDialog.cpp:366
msgid "Warning"
msgstr "Waarschuwing"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134
msgid "Autogenerate support points"
msgstr "Automatisch gegenereerde supportpunten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181
msgid "SLA gizmo keyboard shortcuts"
msgstr "SLA sneltoetsen"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr "Let op: sommige sneltoetsen werken alleen in bewerkmodus."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
msgid "Left click"
msgstr "Linkermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
msgid "Add point"
msgstr "Voeg punt toe"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
msgid "Right click"
msgstr "Rechtermuisknop"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
msgid "Remove point"
msgstr "Verwijder punt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
msgid "Drag"
msgstr "Versleep"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
msgid "Move point"
msgstr "Verplaats punt"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
msgid "Add point to selection"
msgstr "Voeg punt toe aan selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
msgid "Remove point from selection"
msgstr "Verwijder punt uit selectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
msgid "Select by rectangle"
msgstr "Selecteer met boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
msgid "Deselect by rectangle"
msgstr "Deselecteer met boxselectie"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
msgid "Select all points"
msgstr "Selecteer alle punten"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Mouse wheel"
msgstr "Scrollwieltje"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Move clipping plane"
msgstr "Verplaats snijvlak"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
msgid "Reset clipping plane"
msgstr "Reset snijvlak"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
msgid "Switch to editing mode"
msgstr "Schakel over naar bewerkmodus"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521
msgid "Gizmo-Scale"
msgstr "Verschalen"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630
msgid "Gizmo-Place on Face"
msgstr "Plaats op vlak"

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:39
msgid "Entering Paint-on supports"
msgstr "Inkleur-supports toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40
msgid "Entering Seam painting"
msgstr "Inkleur-naad toepassen"

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:47
msgid "Leaving Seam painting"
msgstr "Naad-inkleuren verlaten"

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48
msgid "Leaving Paint-on supports"
msgstr "Supports-inkleuren verlaten"

#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:371
msgid "Add supports"
msgstr "Voeg supports toe"

#: src/slic3r/GUI/GUI_App.cpp:235
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""
"is gebaseerd op Slic3R van Allessandro Ranellucci en de RepRap-community."

#: src/slic3r/GUI/GUI_App.cpp:237
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""
"Bijdragen van Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik, Simon Tillema en vele "
"anderen."

#: src/slic3r/GUI/GUI_App.cpp:238
msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles"
msgstr "Coverfoto door Nora Al-Badri en Jan Nikolai Nelles"

#: src/slic3r/GUI/GUI_App.cpp:378
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""
"Beginnend bij %1% 2.3, de configuratie-locatie op Linux is veranderd "
"(volgens de XDG Base Directory Specification) naar\n"
"%2%.\n"
"\n"
"Deze locatie bestaat nog niet (misschien omdat je een nieuwere versie voor "
"het eerst draait).\n"
"Desondanks is een oude %1%-configuratie-locatie gedetecteerd in\n"
"%3%.\n"
"\n"
"Overweeg om de inhoud uit de oude locatie naar de nieuwe te verplaatsen om "
"toegang te krijgen tot je profielen, etc.\n"
"Let op dat je besluit %1% in de toekomst te downgraden als je de vorige "
"locatie weer wil gebruiken.\n"
"\n"
"Wat wil je nu doen?"

#: src/slic3r/GUI/GUI_App.cpp:386
#, c-format
msgid "%s - BREAKING CHANGE"
msgstr "%s- INGRIJPENDE WIJZIGING"

#: src/slic3r/GUI/GUI_App.cpp:388
msgid "Quit, I will move my data now"
msgstr "Afsluiten, ik zal mijn data nu verplaatsen"

#: src/slic3r/GUI/GUI_App.cpp:388
msgid "Start the application"
msgstr "Start het programma"

#: src/slic3r/GUI/GUI_App.cpp:577
#, c-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""
"%s veroorzaakte een fout. Dit komt mogelijk door een geheugentekort. Als u "
"zeker weet dat u genoeg RAM-geheugen heeft, kan dit ook een andere fout "
"zijn. We waarderen het als u dit meldt.\n"
"\n"
"Het programma zal nu afsluiten."

#: src/slic3r/GUI/GUI_App.cpp:580
msgid "Fatal error"
msgstr "Fatale fout"

#: src/slic3r/GUI/GUI_App.cpp:700
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""
"Fout in het PrusaSlicer-configuratiebestand. Het is mogelijk beschadigd. "
"Probeer het bestand handmatig te verwijderen om de fout te herstellen. Uw "
"gebruikersprofielen worden niet beïnvloed."

#: src/slic3r/GUI/GUI_App.cpp:706
msgid ""
"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error."
msgstr ""
"Fout tijdens het lezen van PrusaGCodeViewer-configuratiebestand. Het is "
"mogelijk beschadigd. Probeer het handmatig te verwijderen."

#: src/slic3r/GUI/GUI_App.cpp:760
#, c-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""
"%s\n"
"Wil je doorgaan?"

#: src/slic3r/GUI/GUI_App.cpp:762 src/slic3r/GUI/UnsavedChangesDialog.cpp:653
msgid "Remember my choice"
msgstr "Onthoud mijn keuze"

#: src/slic3r/GUI/GUI_App.cpp:797
msgid "Loading configuration"
msgstr "Configuratie aan het laden"

#: src/slic3r/GUI/GUI_App.cpp:855
msgid "Preparing settings tabs"
msgstr "Instellingentab voorbereiden"

#: src/slic3r/GUI/GUI_App.cpp:1100
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""
"Je hebt de volgende voorinstellingen opgeslagen voor de "
"printhostuploadwachtrij"

#: src/slic3r/GUI/GUI_App.cpp:1104
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""
"Maar sinds deze versie van PrusaSlicer, wordt de informatie niet meer "
"getoond in de printerinstellingen.\n"
"Instellingen zijn beschikbaar in de fysieke printerinstellingen."

#: src/slic3r/GUI/GUI_App.cpp:1106
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""
"Nieuwe printers worden automatisch \"Printer N\" genoemd bij het aanmaken.\n"
"Let op: deze naam kan later worden aangepast in de fysieke-"
"printerinstellingen"

#: src/slic3r/GUI/GUI_App.cpp:1109
msgid "Information"
msgstr "Informatie"

#: src/slic3r/GUI/GUI_App.cpp:1122 src/slic3r/GUI/GUI_App.cpp:1133
msgid "Recreating"
msgstr "Opnieuw aanmaken"

#: src/slic3r/GUI/GUI_App.cpp:1138
msgid "Loading of current presets"
msgstr "Laden van huidige presets"

#: src/slic3r/GUI/GUI_App.cpp:1143
msgid "Loading of a mode view"
msgstr "Laden van de weergavemodus"

#: src/slic3r/GUI/GUI_App.cpp:1224
msgid "Choose one file (3MF/AMF):"
msgstr "Kies een 3MF- of AMF-bestand:"

#: src/slic3r/GUI/GUI_App.cpp:1236
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Kies één of meer STL-, OBJ-, AMF-, 3MF-, of PRUSA-bestanden:"

#: src/slic3r/GUI/GUI_App.cpp:1248
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr "Kies een bestand (gcode/.GCO/.G/.ngc/NGC):"

#: src/slic3r/GUI/GUI_App.cpp:1259
msgid "Changing of an application language"
msgstr "Veranderen van de taal van het programma"

#: src/slic3r/GUI/GUI_App.cpp:1309
msgid "Select the language"
msgstr "Taalselectie"

#: src/slic3r/GUI/GUI_App.cpp:1309
msgid "Language"
msgstr "Taal"

#: src/slic3r/GUI/GUI_App.cpp:1439
msgid "modified"
msgstr "aangepast"

#: src/slic3r/GUI/GUI_App.cpp:1488
#, c-format
msgid "Run %s"
msgstr "Voer %s uit"

#: src/slic3r/GUI/GUI_App.cpp:1492
msgid "&Configuration Snapshots"
msgstr "Configuratiesnapshots"

#: src/slic3r/GUI/GUI_App.cpp:1492
msgid "Inspect / activate configuration snapshots"
msgstr "Inspecteer/activeer configuratiesnapshots"

#: src/slic3r/GUI/GUI_App.cpp:1493
msgid "Take Configuration &Snapshot"
msgstr "Neem configuratiesnapshot"

#: src/slic3r/GUI/GUI_App.cpp:1493
msgid "Capture a configuration snapshot"
msgstr "Neem een configuratiesnapshot op"

#: src/slic3r/GUI/GUI_App.cpp:1494
msgid "Check for updates"
msgstr "Controleer op updates"

#: src/slic3r/GUI/GUI_App.cpp:1494
msgid "Check for configuration updates"
msgstr "Controleer op configuratie-updates"

#: src/slic3r/GUI/GUI_App.cpp:1497
msgid "&Preferences"
msgstr "Voorkeuren"

#: src/slic3r/GUI/GUI_App.cpp:1503
msgid "Application preferences"
msgstr "Programmavoorkeuren"

#: src/slic3r/GUI/GUI_App.cpp:1508 src/slic3r/GUI/wxExtensions.cpp:673
msgid "Simple"
msgstr "Eenvoudig"

#: src/slic3r/GUI/GUI_App.cpp:1508
msgid "Simple View Mode"
msgstr "Eenvoudige weergave"

#: src/slic3r/GUI/GUI_App.cpp:1510 src/slic3r/GUI/wxExtensions.cpp:675
msgctxt "Mode"
msgid "Advanced"
msgstr "Geavanceerd"

#: src/slic3r/GUI/GUI_App.cpp:1510
msgid "Advanced View Mode"
msgstr "Geavanceerde weergave"

#: src/slic3r/GUI/GUI_App.cpp:1511 src/slic3r/GUI/wxExtensions.cpp:676
msgid "Expert"
msgstr "Expert"

#: src/slic3r/GUI/GUI_App.cpp:1511
msgid "Expert View Mode"
msgstr "Expertweergave"

#: src/slic3r/GUI/GUI_App.cpp:1516
msgid "Mode"
msgstr "Modus"

#: src/slic3r/GUI/GUI_App.cpp:1516
#, c-format
msgid "%s View Mode"
msgstr "%s-weergavemodus"

#: src/slic3r/GUI/GUI_App.cpp:1519
msgid "&Language"
msgstr "Taa&l"

#: src/slic3r/GUI/GUI_App.cpp:1522
msgid "Flash printer &firmware"
msgstr "Flash printerfirmware"

#: src/slic3r/GUI/GUI_App.cpp:1522
msgid "Upload a firmware image into an Arduino based printer"
msgstr "Upload een firmwarebestand op een Arduino-gebaseerde printer"

#: src/slic3r/GUI/GUI_App.cpp:1538
msgid "Taking configuration snapshot"
msgstr "Neem configuratiesnapshot"

#: src/slic3r/GUI/GUI_App.cpp:1538
msgid "Snapshot name"
msgstr "Snapshotnaam"

#: src/slic3r/GUI/GUI_App.cpp:1600
msgid "Language selection"
msgstr "Taalselectie"

#: src/slic3r/GUI/GUI_App.cpp:1602
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""
"Het veranderen van de taal zorgt dat het programma opnieuw opstart.\n"
"U verliest de geladen inhoud zoals getoond in de 3D-weergave."

#: src/slic3r/GUI/GUI_App.cpp:1604
msgid "Do you want to proceed?"
msgstr ""
"Weet u zeker dat u door wilt gaan?\n"
"Do you want to proceed?"

#: src/slic3r/GUI/GUI_App.cpp:1631
msgid "&Configuration"
msgstr "Configuratie"

#: src/slic3r/GUI/GUI_App.cpp:1662
msgid "The preset(s) modifications are successfully saved"
msgstr "De wijzigingen in de voorinstellingen zijn succesvol opgeslagen"

#: src/slic3r/GUI/GUI_App.cpp:1862 src/slic3r/GUI/Tab.cpp:3205
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""
"Het is niet mogelijk meerdelige objecten te printen met de SLA-technologie."

#: src/slic3r/GUI/GUI_App.cpp:1863
msgid "Please check and fix your object list."
msgstr "Controleer en repareer de objectenlijst."

#: src/slic3r/GUI/GUI_App.cpp:1864 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
#: src/slic3r/GUI/Plater.cpp:2347 src/slic3r/GUI/Tab.cpp:3207
msgid "Attention!"
msgstr "Attentie!"

#: src/slic3r/GUI/GUI_App.cpp:1881
msgid "Select a gcode file:"
msgstr "Selecteer een gcode-bestand:"

#: src/slic3r/GUI/GUI_Init.cpp:73 src/slic3r/GUI/GUI_Init.cpp:76
msgid "PrusaSlicer GUI initialization failed"
msgstr "Initialisatie van PrusaSlicer GUI mislukt"

#: src/slic3r/GUI/GUI_Init.cpp:76
msgid "Fatal error, exception catched: %1%"
msgstr "Fatale fout, uitzondering gevonden: %1%"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr "Start op hoogte"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr "Stop op hoogte"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:161
msgid "Remove layer range"
msgstr "Verwijder laagbereik"

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:165
msgid "Add layer range"
msgstr "Voeg laagbereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92
#: src/slic3r/GUI/GUI_ObjectList.cpp:651 src/libslic3r/PrintConfig.cpp:72
#: src/libslic3r/PrintConfig.cpp:216 src/libslic3r/PrintConfig.cpp:225
#: src/libslic3r/PrintConfig.cpp:449 src/libslic3r/PrintConfig.cpp:513
#: src/libslic3r/PrintConfig.cpp:521 src/libslic3r/PrintConfig.cpp:939
#: src/libslic3r/PrintConfig.cpp:1128 src/libslic3r/PrintConfig.cpp:1493
#: src/libslic3r/PrintConfig.cpp:1560 src/libslic3r/PrintConfig.cpp:1741
#: src/libslic3r/PrintConfig.cpp:2208 src/libslic3r/PrintConfig.cpp:2267
#: src/libslic3r/PrintConfig.cpp:2276
msgid "Layers and Perimeters"
msgstr "Lagen en perimeters"

#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95
#: src/slic3r/GUI/GUI_ObjectList.cpp:654 src/slic3r/GUI/GUI_Preview.cpp:306
#: src/slic3r/GUI/Tab.cpp:1458 src/slic3r/GUI/Tab.cpp:1460
#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:352
#: src/libslic3r/PrintConfig.cpp:411 src/libslic3r/PrintConfig.cpp:1621
#: src/libslic3r/PrintConfig.cpp:1999 src/libslic3r/PrintConfig.cpp:2005
#: src/libslic3r/PrintConfig.cpp:2013 src/libslic3r/PrintConfig.cpp:2025
#: src/libslic3r/PrintConfig.cpp:2035 src/libslic3r/PrintConfig.cpp:2043
#: src/libslic3r/PrintConfig.cpp:2058 src/libslic3r/PrintConfig.cpp:2079
#: src/libslic3r/PrintConfig.cpp:2091 src/libslic3r/PrintConfig.cpp:2107
#: src/libslic3r/PrintConfig.cpp:2116 src/libslic3r/PrintConfig.cpp:2125
#: src/libslic3r/PrintConfig.cpp:2136 src/libslic3r/PrintConfig.cpp:2150
#: src/libslic3r/PrintConfig.cpp:2158 src/libslic3r/PrintConfig.cpp:2159
#: src/libslic3r/PrintConfig.cpp:2168 src/libslic3r/PrintConfig.cpp:2176
#: src/libslic3r/PrintConfig.cpp:2190
msgid "Support material"
msgstr "Support"

#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99
#: src/slic3r/GUI/GUI_ObjectList.cpp:658 src/libslic3r/PrintConfig.cpp:2386
#: src/libslic3r/PrintConfig.cpp:2394
msgid "Wipe options"
msgstr "Afveegopties"

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Pad and Support"
msgstr "Basisplaat en support"

#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr "Voeg onderdeel toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr "Voeg modificator toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr "Voeg supportforcering toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr "Voeg supportblokkering toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:653
#: src/slic3r/GUI/GUI_Preview.cpp:302 src/slic3r/GUI/Tab.cpp:1428
#: src/libslic3r/ExtrusionEntity.cpp:316 src/libslic3r/ExtrusionEntity.cpp:344
#: src/libslic3r/PrintConfig.cpp:1135 src/libslic3r/PrintConfig.cpp:1141
#: src/libslic3r/PrintConfig.cpp:1155 src/libslic3r/PrintConfig.cpp:1165
#: src/libslic3r/PrintConfig.cpp:1173 src/libslic3r/PrintConfig.cpp:1175
msgid "Ironing"
msgstr "Strijken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:655
#: src/slic3r/GUI/GUI_Preview.cpp:273 src/slic3r/GUI/Tab.cpp:1484
#: src/libslic3r/PrintConfig.cpp:276 src/libslic3r/PrintConfig.cpp:501
#: src/libslic3r/PrintConfig.cpp:970 src/libslic3r/PrintConfig.cpp:1101
#: src/libslic3r/PrintConfig.cpp:1174 src/libslic3r/PrintConfig.cpp:1550
#: src/libslic3r/PrintConfig.cpp:1822 src/libslic3r/PrintConfig.cpp:1874
#: src/libslic3r/PrintConfig.cpp:2252
msgid "Speed"
msgstr "Snelheid"

#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:656
#: src/slic3r/GUI/Tab.cpp:1520 src/slic3r/GUI/Tab.cpp:2085
#: src/libslic3r/PrintConfig.cpp:531 src/libslic3r/PrintConfig.cpp:1055
#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1843
#: src/libslic3r/PrintConfig.cpp:2071 src/libslic3r/PrintConfig.cpp:2098
msgid "Extruders"
msgstr "Extruders"

#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:657
#: src/libslic3r/PrintConfig.cpp:490 src/libslic3r/PrintConfig.cpp:598
#: src/libslic3r/PrintConfig.cpp:926 src/libslic3r/PrintConfig.cpp:1063
#: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:1863
#: src/libslic3r/PrintConfig.cpp:2080 src/libslic3r/PrintConfig.cpp:2240
msgid "Extrusion Width"
msgstr "Extrusiebreedte"

#: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:661
#: src/slic3r/GUI/Tab.cpp:1416 src/slic3r/GUI/Tab.cpp:1438
#: src/slic3r/GUI/Tab.cpp:1541 src/slic3r/GUI/Tab.cpp:1544
#: src/slic3r/GUI/Tab.cpp:1828 src/slic3r/GUI/Tab.cpp:2165
#: src/slic3r/GUI/Tab.cpp:4077 src/libslic3r/PrintConfig.cpp:90
#: src/libslic3r/PrintConfig.cpp:128 src/libslic3r/PrintConfig.cpp:264
#: src/libslic3r/PrintConfig.cpp:1090 src/libslic3r/PrintConfig.cpp:2410
#: src/libslic3r/PrintConfig.cpp:2582
msgid "Advanced"
msgstr "Geavanceerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:663
#: src/slic3r/GUI/Plater.cpp:356 src/slic3r/GUI/Tab.cpp:4011
#: src/slic3r/GUI/Tab.cpp:4012 src/libslic3r/PrintConfig.cpp:2748
#: src/libslic3r/PrintConfig.cpp:2755 src/libslic3r/PrintConfig.cpp:2764
#: src/libslic3r/PrintConfig.cpp:2773 src/libslic3r/PrintConfig.cpp:2783
#: src/libslic3r/PrintConfig.cpp:2793 src/libslic3r/PrintConfig.cpp:2830
#: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2848
#: src/libslic3r/PrintConfig.cpp:2858 src/libslic3r/PrintConfig.cpp:2867
#: src/libslic3r/PrintConfig.cpp:2880 src/libslic3r/PrintConfig.cpp:2890
#: src/libslic3r/PrintConfig.cpp:2899 src/libslic3r/PrintConfig.cpp:2909
#: src/libslic3r/PrintConfig.cpp:2920 src/libslic3r/PrintConfig.cpp:2928
msgid "Supports"
msgstr "Support"

#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:664
#: src/slic3r/GUI/Plater.cpp:496 src/slic3r/GUI/Tab.cpp:4052
#: src/slic3r/GUI/Tab.cpp:4053 src/slic3r/GUI/Tab.cpp:4124
#: src/libslic3r/PrintConfig.cpp:2936 src/libslic3r/PrintConfig.cpp:2943
#: src/libslic3r/PrintConfig.cpp:2957 src/libslic3r/PrintConfig.cpp:2968
#: src/libslic3r/PrintConfig.cpp:2978 src/libslic3r/PrintConfig.cpp:3000
#: src/libslic3r/PrintConfig.cpp:3011 src/libslic3r/PrintConfig.cpp:3018
#: src/libslic3r/PrintConfig.cpp:3025 src/libslic3r/PrintConfig.cpp:3036
#: src/libslic3r/PrintConfig.cpp:3045 src/libslic3r/PrintConfig.cpp:3054
msgid "Pad"
msgstr "Basisplaat"

#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4070
#: src/slic3r/GUI/Tab.cpp:4071 src/libslic3r/SLA/Hollowing.cpp:45
#: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66
#: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3064
#: src/libslic3r/PrintConfig.cpp:3071 src/libslic3r/PrintConfig.cpp:3081
#: src/libslic3r/PrintConfig.cpp:3090
msgid "Hollowing"
msgstr "Uithollen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:284
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
msgid "Name"
msgstr "Naam"

#: src/slic3r/GUI/GUI_ObjectList.cpp:300 src/slic3r/GUI/GUI_ObjectList.cpp:441
msgid "Editing"
msgstr "Bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:386
#, c-format
msgid "Auto-repaired (%d errors):"
msgstr "Automatisch gerepareerd (%d fouten):"

#: src/slic3r/GUI/GUI_ObjectList.cpp:393
msgid "degenerate facets"
msgstr "vlakken gedegenereerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:394
msgid "edges fixed"
msgstr "randen vastgezet"

#: src/slic3r/GUI/GUI_ObjectList.cpp:395
msgid "facets removed"
msgstr "vlakken verwijderd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:396
msgid "facets added"
msgstr "vlakken toegevoegd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:397
msgid "facets reversed"
msgstr "vlakken omgekeerd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:398
msgid "backwards edges"
msgstr "omgekeerde lijnen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:406
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""
"Rechtermuisklik op het pictogram om het STL-bestand met NetFabb te repareren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:443
msgid "Right button click the icon to change the object settings"
msgstr "Rechtermuisklik op het icoontje om de objectinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:445
msgid "Click the icon to change the object settings"
msgstr "Klik op het pictogram om de objectinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:449
msgid "Right button click the icon to change the object printable property"
msgstr "Rechtermuisklik op het pictogram om de printinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:451
msgid "Click the icon to change the object printable property"
msgstr "Klik op het pictogram om de printinstellingen te wijzigen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:574
msgid "Change Extruder"
msgstr "Wijzig extruder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:589
msgid "Rename Object"
msgstr "Hernoem object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:589
msgid "Rename Sub-object"
msgstr "Hernoem subobject"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1215
#: src/slic3r/GUI/GUI_ObjectList.cpp:4244
msgid "Instances to Separated Objects"
msgstr "Zet instanties om in objecten"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1230
msgid "Volumes in Object reordered"
msgstr "Volumes in object opnieuw geordend"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1230
msgid "Object reordered"
msgstr "Object opnieuw geordend"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1306
#: src/slic3r/GUI/GUI_ObjectList.cpp:1661
#: src/slic3r/GUI/GUI_ObjectList.cpp:1667
#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
#, c-format
msgid "Quick Add Settings (%s)"
msgstr "Snel instellingen toevoegen (%s)"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1396
msgid "Select showing settings"
msgstr "Selecteer getoonde instellingen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1445
msgid "Add Settings for Layers"
msgstr "Voeg laaginstellingen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
msgid "Add Settings for Sub-object"
msgstr "Voeg instellingen voor subobject toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1447
msgid "Add Settings for Object"
msgstr "Voeg instellingen voor object toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1517
msgid "Add Settings Bundle for Height range"
msgstr "Voeg instellingen voor hoogtebereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1518
msgid "Add Settings Bundle for Sub-object"
msgstr "Voeg instellingen voor subobject toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1519
msgid "Add Settings Bundle for Object"
msgstr "Voeg instellingen voor een object toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1558
msgid "Load"
msgstr "Laad"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
#: src/slic3r/GUI/GUI_ObjectList.cpp:1595
#: src/slic3r/GUI/GUI_ObjectList.cpp:1599
msgid "Box"
msgstr "Blok"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
msgid "Cylinder"
msgstr "Cilinder"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
msgid "Slab"
msgstr "Plaat"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1631
msgid "Height range Modifier"
msgstr "Modificator voor hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1640
msgid "Add settings"
msgstr "Voeg instellingen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1718
msgid "Change type"
msgstr "Wijzig type"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1728
#: src/slic3r/GUI/GUI_ObjectList.cpp:1740
msgid "Set as a Separated Object"
msgstr "Stel in als apart object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1740
msgid "Set as a Separated Objects"
msgstr "Stel in als aparte objecten"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1750
msgid "Printable"
msgstr "Printbaar"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1765
msgid "Rename"
msgstr "Hernoem"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1776
msgid "Fix through the Netfabb"
msgstr "Repareer met NetFabb"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1786 src/slic3r/GUI/Plater.cpp:3985
msgid "Export as STL"
msgstr "Exporteer als STL-bestand"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1793
#: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3953
msgid "Reload the selected volumes from disk"
msgstr "Herlaad de geselecteerde volumes vanaf schijf"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1800
msgid "Set extruder for selected items"
msgstr "Stel extruder in voor de geselecteerde items"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1832 src/libslic3r/PrintConfig.cpp:376
msgid "Default"
msgstr "Standaard"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1852
msgid "Scale to print volume"
msgstr "Verschaal tot printvolume"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1852
msgid "Scale the selected object to fit the print volume"
msgstr "Verschaal het geselecteerde object tot deze in het printvolume past"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1858 src/slic3r/GUI/Plater.cpp:4994
msgid "Convert from imperial units"
msgstr "Converteer naar Engelse eenheden"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1861 src/slic3r/GUI/Plater.cpp:4994
msgid "Revert conversion from imperial units"
msgstr "Conversie van Engelse eenheden ongedaan maken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
#: src/slic3r/GUI/GUI_ObjectList.cpp:1876
#: src/slic3r/GUI/GUI_ObjectList.cpp:2569 src/libslic3r/PrintConfig.cpp:3633
msgid "Merge"
msgstr "Samenvoegen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
msgid "Merge objects to the one multipart object"
msgstr "Voeg objecten samen tot één meerdelig object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1876
msgid "Merge objects to the one single object"
msgstr "Voeg objecten samen tot een enkeldelig object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1953
#: src/slic3r/GUI/GUI_ObjectList.cpp:2210
msgid "Add Shape"
msgstr "Voeg vorm toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2038
msgid "Load Part"
msgstr "Laad onderdeel"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2077
msgid "Error!"
msgstr "Fout!"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2152
msgid "Add Generic Subobject"
msgstr "Voeg algemene subobjecten toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2181
msgid "Generic"
msgstr "Algemeen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2307
#: src/slic3r/GUI/GUI_ObjectList.cpp:2408
msgid "Last instance of an object cannot be deleted."
msgstr "Laatste instantie van een object kan niet verwijderd worden."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2319
msgid "Delete Settings"
msgstr "Verwijder instellingen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2341
msgid "Delete All Instances from Object"
msgstr "Verwijder alle instanties van het object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2357
msgid "Delete Height Range"
msgstr "Verwijder hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2389
msgid "From Object List You can't delete the last solid part from object."
msgstr "Het laatste onderdeel van de objectenlijst kan niet verwijderd worden."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2393
msgid "Delete Subobject"
msgstr "Verwijder subobject"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
msgid "Delete Instance"
msgstr "Verwijder instantie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2436 src/slic3r/GUI/Plater.cpp:2862
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""
"Het geselecteerde object kan niet opgedeeld worden omdat het maar één "
"geometrie bevat."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2440
msgid "Split to Parts"
msgstr "Splits naar onderdelen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2576
msgid "Merged"
msgstr "Samengevoegd"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2660
msgid "Merge all parts to the one single object"
msgstr "Voeg alle delen samen tot een enkel object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2692
msgid "Add Layers"
msgstr "Voeg lagen toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2846
msgid "Group manipulation"
msgstr "Groep bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2858
msgid "Object manipulation"
msgstr "Object bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2871
msgid "Object Settings to modify"
msgstr "Objectinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2875
msgid "Part Settings to modify"
msgstr "Onderdeelinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2880
msgid "Layer range Settings to modify"
msgstr "Laagbereikinstellingen om te bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2886
msgid "Part manipulation"
msgstr "Onderdeel bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2892
msgid "Instance manipulation"
msgstr "Instantie bewerken"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2899
msgid "Height ranges"
msgstr "Hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2899
msgid "Settings for height range"
msgstr "Instellingen voor hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3083
msgid "Delete Selected Item"
msgstr "Verwijder geselecteerd item"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3221
msgid "Delete Selected"
msgstr "Verwijder selectie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3297
#: src/slic3r/GUI/GUI_ObjectList.cpp:3325
#: src/slic3r/GUI/GUI_ObjectList.cpp:3345
msgid "Add Height Range"
msgstr "Voeg hoogtebereik toe"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3391
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""
"Kan geen laagbereik toevoegen na het huidige laagbereik.\n"
"Het volgende laagbereik is te dun om in tweeën te splitsen\n"
"zonder over de minimale laagdikte heen te gaan."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3395
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""
"Kan geen laagbereik toevoegen tussen het huidige en het volgende "
"laagbereik.\n"
"Het gat tussen het huidige en volgende laagbereik is kleiner dan\n"
"de minimum toegestane laagdikte."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3400
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""
"Kan geen nieuw laagbereik toevoegen na het huidige laagbereik.\n"
"Het huidige laagbereik overlapt met het volgende laagbereik."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3459
msgid "Edit Height Range"
msgstr "Bewerk hoogtebereik"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3754
msgid "Selection-Remove from list"
msgstr "Selectie - Verwijder van lijst"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3762
msgid "Selection-Add from list"
msgstr "Selectie - Voeg toe aan lijst"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3880
msgid "Object or Instance"
msgstr "Object of instantie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3881
#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
msgid "Part"
msgstr "Onderdeel"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3881
msgid "Layer"
msgstr "Laag"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3883
msgid "Unsupported selection"
msgstr "Niet-ondersteunde selectie"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3884
#, c-format
msgid "You started your selection with %s Item."
msgstr "De selectie is gestart met item %s."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3885
#, c-format
msgid "In this mode you can select only other %s Items%s"
msgstr "In deze modus kunt u alleen andere %s items %s selecteren"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3888
msgid "of a current Object"
msgstr "van het huidige object"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3893
#: src/slic3r/GUI/GUI_ObjectList.cpp:3968 src/slic3r/GUI/Plater.cpp:142
msgid "Info"
msgstr "Info"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4009
msgid "You can't change a type of the last solid part of the object."
msgstr ""
"U kunt het type van het laatste onderdeel van een object niet wijzigen."

#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
msgid "Modifier"
msgstr "Modificator"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
msgid "Support Enforcer"
msgstr "Supportforcering"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
msgid "Support Blocker"
msgstr "Supportblokkering"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4016
msgid "Select type of part"
msgstr "Selecteer onderdeeltype"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4021
msgid "Change Part Type"
msgstr "Wijzig onderdeeltype"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4266
msgid "Enter new name"
msgstr "Voer nieuwe naam in"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4266
msgid "Renaming"
msgstr "Hernoemen"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4282
#: src/slic3r/GUI/GUI_ObjectList.cpp:4409
#: src/slic3r/GUI/SavePresetDialog.cpp:101
#: src/slic3r/GUI/SavePresetDialog.cpp:109
msgid "The supplied name is not valid;"
msgstr "De ingevoerde naam is niet geldig;"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4283
#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
#: src/slic3r/GUI/SavePresetDialog.cpp:102
msgid "the following characters are not allowed:"
msgstr "de volgende karakters zijn niet toegestaan:"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4458
msgid "Select extruder number:"
msgstr "Selecteer extrudernummer:"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4459
msgid "This extruder will be set for selected items"
msgstr "Deze extruder wordt ingesteld voor de geselecteerde items"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4484
msgid "Change Extruders"
msgstr "Wijzig extruders"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1531
msgid "Set Printable"
msgstr "Stel in op printbaar"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1531
msgid "Set Unprintable"
msgstr "Stel in op niet-printbaar"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111
msgid "World coordinates"
msgstr "Wereldcoördinaten"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112
msgid "Local coordinates"
msgstr "Lokale coördinaten"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88
msgid "Select coordinate space, in which the transformation will be performed."
msgstr "Stel een coördinatenstelsel in. Hierin wordt de wijziging uitgevoerd."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:621
msgid "Object name"
msgstr "Objectnaam"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:505
msgid "Position"
msgstr "Positie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506
#: src/slic3r/GUI/Mouse3DController.cpp:487
#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Rotation"
msgstr "Rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271
#, c-format
msgid "Toggle %c axis mirroring"
msgstr "Zet %c-asspiegeling aan"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
msgid "Set Mirror"
msgstr "Stel spiegeling in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
msgid "in"
msgstr "in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357
msgid "Drop to bed"
msgstr "Plaats op het bed"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372
msgid "Reset rotation"
msgstr "Reset rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394
msgid "Reset Rotation"
msgstr "Reset rotatie"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
msgid "Reset scale"
msgstr "Reset verschaling"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507
msgid "Scale factors"
msgstr "Verschalingsfactoren"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:561
msgid "Translate"
msgstr "Verplaats"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:625
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""
"Niet-gelijke verschaling kan niet gebruikt worden voor meerdere objecten of "
"onderdelen"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797
msgid "Set Position"
msgstr "Stel positie in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:828
msgid "Set Orientation"
msgstr "Stel oriëntatie in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:893
msgid "Set Scale"
msgstr "Stel verschaling in"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:925
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""
"Het huidige aangepaste object is gekanteld (rotatiehoeken zijn geen "
"veelvouden van 90°).\n"
"Niet-gelijke verschaling van gekantelde objecten is alleen mogelijk in het "
"wereldcoördinatensysteem\n"
"als de rotatie is ingebouwd in de objectcoördinaten."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:928
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""
"Deze bewerking werkt onomkeerbaar.\n"
"Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:62
msgid "Additional Settings"
msgstr "Extra instellingen"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:98
msgid "Remove parameter"
msgstr "Verwijder parameter"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:104
#, c-format
msgid "Delete Option %s"
msgstr "Verwijder optie %s"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:157
#, c-format
msgid "Change Option %s"
msgstr "Wijzig optie %s"

#: src/slic3r/GUI/GUI_Preview.cpp:260 src/slic3r/GUI/GUI_Preview.cpp:266
msgid "View"
msgstr "Weergave"

#: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/PrintConfig.cpp:543
msgid "Height"
msgstr "Hoogte"

#: src/slic3r/GUI/GUI_Preview.cpp:272 src/libslic3r/PrintConfig.cpp:2372
msgid "Width"
msgstr "Breedte"

#: src/slic3r/GUI/GUI_Preview.cpp:274 src/slic3r/GUI/Tab.cpp:1814
msgid "Fan speed"
msgstr "Ventilatorsnelheid"

#: src/slic3r/GUI/GUI_Preview.cpp:275
msgid "Volumetric flow rate"
msgstr "Volumetrisch debiet"

#: src/slic3r/GUI/GUI_Preview.cpp:281 src/slic3r/GUI/GUI_Preview.cpp:283
msgid "Show"
msgstr "Toon"

#: src/slic3r/GUI/GUI_Preview.cpp:288 src/slic3r/GUI/GUI_Preview.cpp:290
#: src/slic3r/GUI/GUI_Preview.cpp:311
msgid "Feature types"
msgstr "Type opties"

#: src/slic3r/GUI/GUI_Preview.cpp:296 src/libslic3r/ExtrusionEntity.cpp:310
#: src/libslic3r/ExtrusionEntity.cpp:332
msgid "Perimeter"
msgstr "Perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:297 src/libslic3r/ExtrusionEntity.cpp:311
#: src/libslic3r/ExtrusionEntity.cpp:334
msgid "External perimeter"
msgstr "Buitenste perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:298 src/libslic3r/ExtrusionEntity.cpp:312
#: src/libslic3r/ExtrusionEntity.cpp:336
msgid "Overhang perimeter"
msgstr "Overhangende perimeter"

#: src/slic3r/GUI/GUI_Preview.cpp:299 src/libslic3r/ExtrusionEntity.cpp:313
#: src/libslic3r/ExtrusionEntity.cpp:338
msgid "Internal infill"
msgstr "Inwendige vulling"

#: src/slic3r/GUI/GUI_Preview.cpp:300 src/libslic3r/ExtrusionEntity.cpp:314
#: src/libslic3r/ExtrusionEntity.cpp:340 src/libslic3r/PrintConfig.cpp:1862
#: src/libslic3r/PrintConfig.cpp:1873
msgid "Solid infill"
msgstr "Dichte vulling"

#: src/slic3r/GUI/GUI_Preview.cpp:301 src/libslic3r/ExtrusionEntity.cpp:315
#: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/PrintConfig.cpp:2239
#: src/libslic3r/PrintConfig.cpp:2251
msgid "Top solid infill"
msgstr "Bovenste dichte vulling"

#: src/slic3r/GUI/GUI_Preview.cpp:303 src/libslic3r/ExtrusionEntity.cpp:317
#: src/libslic3r/ExtrusionEntity.cpp:346
msgid "Bridge infill"
msgstr "Brugvulling"

#: src/slic3r/GUI/GUI_Preview.cpp:304 src/libslic3r/ExtrusionEntity.cpp:318
#: src/libslic3r/ExtrusionEntity.cpp:348 src/libslic3r/PrintConfig.cpp:969
msgid "Gap fill"
msgstr "Gatenvulling"

#: src/slic3r/GUI/GUI_Preview.cpp:305 src/slic3r/GUI/Tab.cpp:1448
#: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/ExtrusionEntity.cpp:350
msgid "Skirt"
msgstr "Skirt"

#: src/slic3r/GUI/GUI_Preview.cpp:307 src/libslic3r/ExtrusionEntity.cpp:321
#: src/libslic3r/ExtrusionEntity.cpp:354 src/libslic3r/PrintConfig.cpp:2124
msgid "Support material interface"
msgstr "Supportinterface"

#: src/slic3r/GUI/GUI_Preview.cpp:308 src/slic3r/GUI/Tab.cpp:1531
#: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/ExtrusionEntity.cpp:356
msgid "Wipe tower"
msgstr "Afveegblok"

#: src/slic3r/GUI/GUI_Preview.cpp:333 src/slic3r/GUI/GUI_Preview.cpp:1473
msgid "Shells"
msgstr "Shells"

#: src/slic3r/GUI/GUI_Preview.cpp:334
msgid "Legend"
msgstr "Legenda"

#: src/slic3r/GUI/GUI_Preview.cpp:1474
msgid "Tool marker"
msgstr "Toolmarkering"

#: src/slic3r/GUI/GUI_Preview.cpp:1475
msgid "Legend/Estimated printing time"
msgstr "Legenda / Geschatte printtijd"

#: src/slic3r/GUI/ImGuiWrapper.cpp:804 src/slic3r/GUI/Search.cpp:464
msgid "Use for search"
msgstr "Gebruik om te zoeken"

#: src/slic3r/GUI/ImGuiWrapper.cpp:805 src/slic3r/GUI/Search.cpp:458
msgid "Category"
msgstr "Categorie"

#: src/slic3r/GUI/ImGuiWrapper.cpp:807 src/slic3r/GUI/Search.cpp:460
msgid "Search in English"
msgstr "Zoek in het Engels"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:149
msgid "Arranging"
msgstr "Schikken"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:176
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "Kan modellen niet schikken. Sommige vormen kunnen ongeldig zijn."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182
msgid "Arranging canceled."
msgstr "Schikken geannuleerd."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183
msgid "Arranging done."
msgstr "Schikken voltooid."

#: src/slic3r/GUI/Jobs/Job.cpp:75
msgid "ERROR: not enough resources to execute a new job."
msgstr "Fout: niet genoeg middelen om nieuwe job te starten."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41
msgid "Searching for optimal orientation"
msgstr "Zoeken naar optimale oriëntatie"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73
msgid "Orientation search canceled."
msgstr "Oriëntatie zoeken geannuleerd."

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74
msgid "Orientation found."
msgstr "Oriëntatie gevonden."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35
msgid "Choose SLA archive:"
msgstr "Kies SLA-archief:"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39
msgid "Import file"
msgstr "Importeer bestand"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46
msgid "Import model and profile"
msgstr "Importeerd model en profiel"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
msgid "Import profile only"
msgstr "Importeer alleen profiel"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
msgid "Import model only"
msgstr "Importeer alleen model"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59
msgid "Accurate"
msgstr "Nauwkeurig"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
msgid "Balanced"
msgstr "Gebalanceerd"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
msgid "Quick"
msgstr "Snel"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
msgid "Importing SLA archive"
msgstr "Importeer SLA-archief"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159
msgid "Importing canceled."
msgstr "Importeren geannuleerd."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160
msgid "Importing done."
msgstr "Succesvol geïmporteerd."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2345
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr "U kunt geen SLA-project laden met een meerdelig object op het bed"

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2346
#: src/slic3r/GUI/Tab.cpp:3206
msgid "Please check your object list before preset changing."
msgstr "Controleer de objectenlijst voor het wijzigen van de preset."

#: src/slic3r/GUI/KBShortcutsDialog.cpp:37
#: src/slic3r/GUI/KBShortcutsDialog.cpp:39 src/slic3r/GUI/MainFrame.cpp:953
#: src/slic3r/GUI/MainFrame.cpp:1344
msgid "Keyboard Shortcuts"
msgstr "Sneltoetsen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
msgid "New project, clear plater"
msgstr "Start nieuw project, verwijder modellen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
msgstr ""
"Open STL-, OBJ-, AMF- of 3MF-project met configuratie, verwijder huidige "
"modellen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Save project (3mf)"
msgstr "3MF-project opslaan"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Save project as (3mf)"
msgstr "3MF-project opslaan als"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "(Re)slice"
msgstr "(Her)slice"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
msgstr ""
"Importeer STL-, OBJ-, AMF- of 3MF-bestanden zonder configuratie en behoud "
"modellen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Import Config from ini/amf/3mf/gcode"
msgstr "Importeer configuratie van INI-, AMF-, 3MF- of gcode-bestand"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""
"Laad configuratie van INI-, AMF-, 3MF- of gcode-bestanden en voeg samen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Plater.cpp:762
#: src/slic3r/GUI/Plater.cpp:5849 src/libslic3r/PrintConfig.cpp:3538
msgid "Export G-code"
msgstr "Exporteer gcode-bestand"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Plater.cpp:5850
msgid "Send G-code"
msgstr "Stuur G-code"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Export config"
msgstr "Exporteer configuratie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118 src/slic3r/GUI/Plater.cpp:750
msgid "Export to SD card / Flash drive"
msgstr "Exporteer naar SD-kaart / USB-stick"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Eject SD card / Flash drive"
msgstr "SD-kaart/USB-stick uitwerpen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Select all objects"
msgstr "Selecteer alle objecten"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Deselect all"
msgstr "Deselecteer alles"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
msgid "Delete selected"
msgstr "Deselecteer selectie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Copy to clipboard"
msgstr "Kopieer naar klembord"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
msgid "Paste from clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
msgid "Reload plater from disk"
msgstr "Herlaad modellen van schijf"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
msgid "Select Plater Tab"
msgstr "Selecteer 3D-weergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Select Print Settings Tab"
msgstr "Selecteer printinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Select Filament Settings Tab"
msgstr "Selecteer filamentinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Select Printer Settings Tab"
msgstr "Selecteer printerinstellingentab"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid "Switch to 3D"
msgstr "Schakel over naar 3D"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Switch to Preview"
msgstr "Schakel over naar voorbeeldweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
#: src/slic3r/GUI/PrintHostDialogs.cpp:163
msgid "Print host upload queue"
msgstr "Printhost uploadwachtrij"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Camera view"
msgstr "Weergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Show/Hide object/instance labels"
msgstr "Toon/verberg objecten- of instantielabels"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Preferences.cpp:12
msgid "Preferences"
msgstr "Voorkeuren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Show keyboard shortcuts list"
msgstr "Toon lijst met sneltoetsen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Commands"
msgstr "Commando's"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Add Instance of the selected object"
msgstr "Voeg instantie van het geselecteerde object toe"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Remove Instance of the selected object"
msgstr "Verwijder instanties van het geselecteerde object"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""
"Druk om meerdere objecten te selecteren\n"
"of beweeg meerdere objecten met de muis"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Press to activate selection rectangle"
msgstr "Druk om selectiebox te activeren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Press to activate deselection rectangle"
msgstr "Druk om deselectiebox te activeren"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
msgid "Arrow Up"
msgstr "Pijltje naar boven"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Move selection 10 mm in positive Y direction"
msgstr "Verplaats selectie +10 mm in Y-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
msgid "Arrow Down"
msgstr "Pijltje naar beneden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Move selection 10 mm in negative Y direction"
msgstr "Verplaats selectie -10 mm in Y-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
msgid "Arrow Left"
msgstr "Pijltje naar links"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid "Move selection 10 mm in negative X direction"
msgstr "Verplaats selectie -10 mm in X-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid "Arrow Right"
msgstr "Pijltje naar rechts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Move selection 10 mm in positive X direction"
msgstr "Verplaats selectie +10 mm in X-richting"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Any arrow"
msgstr "Elke pijl"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Movement step set to 1 mm"
msgstr "Verplaatsingsstap instellen op 1 mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Movement in camera space"
msgstr "Verplaatsing in cameraruimte"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Page Up"
msgstr "Page Up"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Rotate selection 45 degrees CCW"
msgstr "Roteer selectie 45° tegen de klok in"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Page Down"
msgstr "Page Down"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
msgid "Rotate selection 45 degrees CW"
msgstr "Roteer selectie 45° met de klok mee"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Gizmo move"
msgstr "Verplaats"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Gizmo scale"
msgstr "Verschaal"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
msgid "Gizmo rotate"
msgstr "Roteer"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Gizmo cut"
msgstr "Snijden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Gizmo Place face on bed"
msgstr "Plaats vlak op bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
msgid "Gizmo SLA hollow"
msgstr "SLA uithollen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Gizmo SLA support points"
msgstr "SLA-supportpunten"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Unselect gizmo or clear selection"
msgstr "Deselecteer bewerker of selectie"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Change camera type (perspective, orthographic)"
msgstr "Wijzig weergavetype (perspectief of orthografisch)"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
msgid "Zoom to Bed"
msgstr "Zoom in op bed"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""
"Zoom in op geselecteerde objecten\n"
"of alle objecten in de 3D-weergave als niets is geselecteerd"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
msgid "Zoom in"
msgstr "Zoom in"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
msgid "Zoom out"
msgstr "Zoom uit"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
msgid "Switch between Editor/Preview"
msgstr "Schakel tussen bewerken / voorbeeldweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Collapse/Expand the sidebar"
msgstr "Klap de zijbalk in/uit"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr "Toon/verberg het dialoogvenster van 3Dconnexion-apparaatinstellingen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:194 src/slic3r/GUI/MainFrame.cpp:351
#: src/slic3r/GUI/MainFrame.cpp:363
msgid "Plater"
msgstr "3D-weergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr "Alle bewerkingen: roteer - linkermuisknop, beweeg - rechtermuisknop"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Gizmo move: Press to snap by 1mm"
msgstr "Bewerken: Druk om te snappen per 1mm"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
msgid "Gizmo scale: Press to snap by 5%"
msgstr "Verschalen: Druk om te snappen per 5%"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr "Verschalen: Verschaal selectie tot het past in het printvolume"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr "Verschalen: Druk om in een enkele richting te verschalen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""
"Verschalen: Druk om geselecteerde modellen rond hun eigen middelpunt te "
"verschalen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""
"Roteren: Druk om geselecteerde modellen rond hun eigen middelpunt te draaien"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
msgid "Gizmos"
msgstr "Bewerkers"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
#: src/slic3r/GUI/KBShortcutsDialog.cpp:214
msgid "Upper Layer"
msgstr "Bovenste laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
msgid "Lower Layer"
msgstr "Onderste laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
msgid "Show/Hide Legend & Estimated printing time"
msgstr "Toon/Verberg legenda en geschatte printtijd"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:219 src/slic3r/GUI/Plater.cpp:4153
#: src/slic3r/GUI/Tab.cpp:2570
msgid "Preview"
msgstr "Voorbeeldweergave"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
msgid "Move current slider thumb Up"
msgstr "Verplaats huidige schuif naar boven"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
msgid "Move current slider thumb Down"
msgstr "Verplaats huidige schuif naar beneden"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
msgid "Set upper thumb to current slider thumb"
msgstr "Stel de bovenste schuif in op het huidige punt"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
msgid "Set lower thumb to current slider thumb"
msgstr "Stel de onderste schuif in op het huidige punt"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
msgid "Add color change marker for current layer"
msgstr "Kleurwisselmarkering voor de huidige laag toevoegen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Delete color change marker for current layer"
msgstr "Verwijder kleurwisselmarkering voor de huidige laag"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
#: src/slic3r/GUI/KBShortcutsDialog.cpp:238
#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""
"Druk om 5x zo snel te gaan bij het verplaatsen van de schuif\n"
"met pijltjestoetsen of het scrollwieltje"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
msgid "Layers Slider"
msgstr "Schuif voor lagen"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
msgid "Move current slider thumb Left"
msgstr "Verplaats huidige schuif naar links"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid "Move current slider thumb Right"
msgstr "Verplaats huidige schuif naar rechts"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
msgid "Sequential Slider"
msgstr "Schuifvolgorde"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:270
msgid "Keyboard shortcuts"
msgstr "Sneltoetsen"

#: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:1274
msgid "Open new instance"
msgstr "Open nieuw venster"

#: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:77
#: src/slic3r/GUI/MainFrame.cpp:1274
msgid "Open a new PrusaSlicer instance"
msgstr "Open een PrusaSlicer venster"

#: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:79
msgid "G-code preview"
msgstr "G-code weergave"

#: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:1153
msgid "Open G-code viewer"
msgstr "Open de G-code weergave"

#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:1410
msgid "Open PrusaSlicer"
msgstr "Open PrusaSlicer"

#: src/slic3r/GUI/MainFrame.cpp:79
msgid "Open new G-code viewer"
msgstr "Open G-code weergave"

#: src/slic3r/GUI/MainFrame.cpp:166
msgid ""
"Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/"
"releases"
msgstr ""
"Vergeet niet op updates te controleren op https://github.com/prusa3d/"
"PrusaSlicer/releases"

#: src/slic3r/GUI/MainFrame.cpp:550 src/slic3r/GUI/MainFrame.cpp:552
msgid "based on Slic3r"
msgstr "gebaseerd op Slic3r"

#: src/slic3r/GUI/MainFrame.cpp:921 src/slic3r/GUI/MainFrame.cpp:1320
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D-stuurprogramma"

#: src/slic3r/GUI/MainFrame.cpp:921 src/slic3r/GUI/MainFrame.cpp:1320
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "Open de Prusa3D drivers-downloadpagina in uw browser"

#: src/slic3r/GUI/MainFrame.cpp:923 src/slic3r/GUI/MainFrame.cpp:1322
msgid "Software &Releases"
msgstr "Laatste versie downloaden"

#: src/slic3r/GUI/MainFrame.cpp:923 src/slic3r/GUI/MainFrame.cpp:1322
msgid "Open the software releases page in your browser"
msgstr "Download de laatste softwareversie vanuit uw browser"

#: src/slic3r/GUI/MainFrame.cpp:929 src/slic3r/GUI/MainFrame.cpp:1328
#, c-format
msgid "%s &Website"
msgstr "%s-&website"

#: src/slic3r/GUI/MainFrame.cpp:930 src/slic3r/GUI/MainFrame.cpp:1329
#, c-format
msgid "Open the %s website in your browser"
msgstr "Open de %s website in uw browser"

#: src/slic3r/GUI/MainFrame.cpp:936 src/slic3r/GUI/MainFrame.cpp:1335
msgid "System &Info"
msgstr "Systeeminfo"

#: src/slic3r/GUI/MainFrame.cpp:936 src/slic3r/GUI/MainFrame.cpp:1335
msgid "Show system information"
msgstr "Toon systeeminformatie"

#: src/slic3r/GUI/MainFrame.cpp:938 src/slic3r/GUI/MainFrame.cpp:1337
msgid "Show &Configuration Folder"
msgstr "Toon configuratiemap"

#: src/slic3r/GUI/MainFrame.cpp:938 src/slic3r/GUI/MainFrame.cpp:1337
msgid "Show user configuration folder (datadir)"
msgstr "Toon gebruikersconfiguratiemap (datadir)"

#: src/slic3r/GUI/MainFrame.cpp:940 src/slic3r/GUI/MainFrame.cpp:1339
msgid "Report an I&ssue"
msgstr "Rapporteer een fout"

#: src/slic3r/GUI/MainFrame.cpp:940 src/slic3r/GUI/MainFrame.cpp:1339
#, c-format
msgid "Report an issue on %s"
msgstr "Rapporteer een fout op %s"

#: src/slic3r/GUI/MainFrame.cpp:945 src/slic3r/GUI/MainFrame.cpp:949
#: src/slic3r/GUI/MainFrame.cpp:1341
#, c-format
msgid "&About %s"
msgstr "&Over %s"

#: src/slic3r/GUI/MainFrame.cpp:945 src/slic3r/GUI/MainFrame.cpp:949
#: src/slic3r/GUI/MainFrame.cpp:1341
msgid "Show about dialog"
msgstr "Toon Over-dialoogvenster"

#: src/slic3r/GUI/MainFrame.cpp:953 src/slic3r/GUI/MainFrame.cpp:1344
msgid "Show the list of the keyboard shortcuts"
msgstr "Toon de lijst met sneltoetsen"

#: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1287
msgid "Iso"
msgstr "Isometrisch"

#: src/slic3r/GUI/MainFrame.cpp:967 src/slic3r/GUI/MainFrame.cpp:1287
msgid "Iso View"
msgstr "Isometrisch aanzicht"

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:971 src/slic3r/GUI/MainFrame.cpp:1291
#: src/libslic3r/PrintConfig.cpp:2266 src/libslic3r/PrintConfig.cpp:2275
msgid "Top"
msgstr "Bovenkant"

#: src/slic3r/GUI/MainFrame.cpp:971 src/slic3r/GUI/MainFrame.cpp:1291
msgid "Top View"
msgstr "Bovenaanzicht"

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:974 src/slic3r/GUI/MainFrame.cpp:1294
#: src/libslic3r/PrintConfig.cpp:215 src/libslic3r/PrintConfig.cpp:224
msgid "Bottom"
msgstr "Onderkant"

#: src/slic3r/GUI/MainFrame.cpp:974 src/slic3r/GUI/MainFrame.cpp:1294
msgid "Bottom View"
msgstr "Onderaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:976 src/slic3r/GUI/MainFrame.cpp:1296
msgid "Front"
msgstr "Voorkant"

#: src/slic3r/GUI/MainFrame.cpp:976 src/slic3r/GUI/MainFrame.cpp:1296
msgid "Front View"
msgstr "Vooraanzicht"

#: src/slic3r/GUI/MainFrame.cpp:978 src/slic3r/GUI/MainFrame.cpp:1298
#: src/libslic3r/PrintConfig.cpp:1751
msgid "Rear"
msgstr "Achterzijde"

#: src/slic3r/GUI/MainFrame.cpp:978 src/slic3r/GUI/MainFrame.cpp:1298
msgid "Rear View"
msgstr "Achteraanzicht"

#: src/slic3r/GUI/MainFrame.cpp:980 src/slic3r/GUI/MainFrame.cpp:1300
msgid "Left"
msgstr "Links"

#: src/slic3r/GUI/MainFrame.cpp:980 src/slic3r/GUI/MainFrame.cpp:1300
msgid "Left View"
msgstr "Linkerzijaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:1302
msgid "Right"
msgstr "Rechts"

#: src/slic3r/GUI/MainFrame.cpp:982 src/slic3r/GUI/MainFrame.cpp:1302
msgid "Right View"
msgstr "Rechterzijaanzicht"

#: src/slic3r/GUI/MainFrame.cpp:998
msgid "&New Project"
msgstr "Nieuw project"

#: src/slic3r/GUI/MainFrame.cpp:998
msgid "Start a new project"
msgstr "Start nieuw project"

#: src/slic3r/GUI/MainFrame.cpp:1001
msgid "&Open Project"
msgstr "Open project"

#: src/slic3r/GUI/MainFrame.cpp:1001
msgid "Open a project file"
msgstr "Open een projectbestand"

#: src/slic3r/GUI/MainFrame.cpp:1006
msgid "Recent projects"
msgstr "Huidige projecten"

#: src/slic3r/GUI/MainFrame.cpp:1015
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""
"Het geselecteerde project is niet langer beschikbaar.\n"
"Wilt u het verwijderen uit de lijst met recente projecten?"

#: src/slic3r/GUI/MainFrame.cpp:1015 src/slic3r/GUI/MainFrame.cpp:1498
#: src/slic3r/GUI/PrintHostDialogs.cpp:259
msgid "Error"
msgstr "Fout"

#: src/slic3r/GUI/MainFrame.cpp:1040
msgid "&Save Project"
msgstr "Project opslaan"

#: src/slic3r/GUI/MainFrame.cpp:1040
msgid "Save current project file"
msgstr "Projectbestand opslaan"

#: src/slic3r/GUI/MainFrame.cpp:1044 src/slic3r/GUI/MainFrame.cpp:1046
msgid "Save Project &as"
msgstr "Project opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1044 src/slic3r/GUI/MainFrame.cpp:1046
msgid "Save current project file as"
msgstr "Projectbestand opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1054
msgid "Import STL/OBJ/AM&F/3MF"
msgstr "Importeer STL-, OBJ-, AMF- of 3MF-bestanden"

#: src/slic3r/GUI/MainFrame.cpp:1054
msgid "Load a model"
msgstr "Laad een model"

#: src/slic3r/GUI/MainFrame.cpp:1058
msgid "Import STL (imperial units)"
msgstr "Importeer STL (Engelse eenheden)"

#: src/slic3r/GUI/MainFrame.cpp:1058
msgid "Load an model saved with imperial units"
msgstr "Laad een model dat is opgeslagen met Engelse eenheden"

#: src/slic3r/GUI/MainFrame.cpp:1062
msgid "Import SL1 archive"
msgstr "Importeer SL1-archief"

#: src/slic3r/GUI/MainFrame.cpp:1062
msgid "Load an SL1 archive"
msgstr "Laad een SL1-archief"

#: src/slic3r/GUI/MainFrame.cpp:1067
msgid "Import &Config"
msgstr "Importeer configuratiebestand"

#: src/slic3r/GUI/MainFrame.cpp:1067
msgid "Load exported configuration file"
msgstr "Laad geëxporteerd configuratiebestand"

#: src/slic3r/GUI/MainFrame.cpp:1070
msgid "Import Config from &project"
msgstr "Importeer configuratie van projectbestand"

#: src/slic3r/GUI/MainFrame.cpp:1070
msgid "Load configuration from project file"
msgstr "Laad configuratie van projectbestand"

#: src/slic3r/GUI/MainFrame.cpp:1074
msgid "Import Config &Bundle"
msgstr "Importeer configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:1074
msgid "Load presets from a bundle"
msgstr "Laad presets van een bundel"

#: src/slic3r/GUI/MainFrame.cpp:1077
msgid "&Import"
msgstr "Importeer"

#: src/slic3r/GUI/MainFrame.cpp:1080 src/slic3r/GUI/MainFrame.cpp:1460
msgid "Export &G-code"
msgstr "Exporteer G-code"

#: src/slic3r/GUI/MainFrame.cpp:1080
msgid "Export current plate as G-code"
msgstr "Exporteer modellen als gcode-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1084 src/slic3r/GUI/MainFrame.cpp:1461
msgid "S&end G-code"
msgstr "Stuur G-code"

#: src/slic3r/GUI/MainFrame.cpp:1084
msgid "Send to print current plate as G-code"
msgstr "Stuur huidige weergave als G-code"

#: src/slic3r/GUI/MainFrame.cpp:1088
msgid "Export G-code to SD card / Flash drive"
msgstr "Exporteer G-code naar SD-kaart/USB-stick"

#: src/slic3r/GUI/MainFrame.cpp:1088
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr "Exporteer huidige weergave als G-code naar SD-kaart/USB-stick"

#: src/slic3r/GUI/MainFrame.cpp:1092
msgid "Export plate as &STL"
msgstr "Exporteer modellen als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1092
msgid "Export current plate as STL"
msgstr "Exporteer modellen als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1095
msgid "Export plate as STL &including supports"
msgstr "Exporteer modellen met support als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1095
msgid "Export current plate as STL including supports"
msgstr "Exporteer modellen met support als STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1098
msgid "Export plate as &AMF"
msgstr "Exporteer modellen als AMF-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1098
msgid "Export current plate as AMF"
msgstr "Exporteer modellen als AMF-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1102 src/slic3r/GUI/MainFrame.cpp:1407
msgid "Export &toolpaths as OBJ"
msgstr "Exporteer &toolpaden als OBJ-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1102 src/slic3r/GUI/MainFrame.cpp:1407
msgid "Export toolpaths as OBJ"
msgstr "Exporteer toolpaden als OBJ-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1106
msgid "Export &Config"
msgstr "Exporteer configuratie"

#: src/slic3r/GUI/MainFrame.cpp:1106
msgid "Export current configuration to file"
msgstr "Exporteer huidige configuratie naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:1109
msgid "Export Config &Bundle"
msgstr "Exporteer configuratiebundel"

#: src/slic3r/GUI/MainFrame.cpp:1109
msgid "Export all presets to file"
msgstr "Exporteer alle presets naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:1112
msgid "Export Config Bundle With Physical Printers"
msgstr "Exporteer configuratiebundel met fysieke printers"

#: src/slic3r/GUI/MainFrame.cpp:1112
msgid "Export all presets including physical printers to file"
msgstr ""
"Exporteer alle voorinstellingen, inclusief fysieke printers naar bestand"

#: src/slic3r/GUI/MainFrame.cpp:1115
msgid "&Export"
msgstr "Exporteer"

#: src/slic3r/GUI/MainFrame.cpp:1117
msgid "Ejec&t SD card / Flash drive"
msgstr "SD-kaart/USB-stick uitwerpen"

#: src/slic3r/GUI/MainFrame.cpp:1117
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr "SD-kaart/USB-stick uitwerpen nadat de G-code geëxporteerd is."

#: src/slic3r/GUI/MainFrame.cpp:1125
msgid "Quick Slice"
msgstr "Snel slicen"

#: src/slic3r/GUI/MainFrame.cpp:1125
msgid "Slice a file into a G-code"
msgstr "Slice naar een gcode-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1131
msgid "Quick Slice and Save As"
msgstr "Snel slicen en opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1131
msgid "Slice a file into a G-code, save as"
msgstr "Slice naar gcode-bestand, opslaan als"

#: src/slic3r/GUI/MainFrame.cpp:1137
msgid "Repeat Last Quick Slice"
msgstr "Herhaal laatste snelle slice"

#: src/slic3r/GUI/MainFrame.cpp:1137
msgid "Repeat last quick slice"
msgstr "Herhaal laatste snelle slice"

#: src/slic3r/GUI/MainFrame.cpp:1145
msgid "(Re)Slice No&w"
msgstr "(&Her)slice nu"

#: src/slic3r/GUI/MainFrame.cpp:1145
msgid "Start new slicing process"
msgstr "Start nieuw sliceproces"

#: src/slic3r/GUI/MainFrame.cpp:1149
msgid "&Repair STL file"
msgstr "&Repareer STL-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1149
msgid "Automatically repair an STL file"
msgstr "Automatisch een STL-bestand repareren"

#: src/slic3r/GUI/MainFrame.cpp:1153
msgid "&G-code preview"
msgstr "&G-code weergave"

#: src/slic3r/GUI/MainFrame.cpp:1156 src/slic3r/GUI/MainFrame.cpp:1414
msgid "&Quit"
msgstr "Afsluiten"

#: src/slic3r/GUI/MainFrame.cpp:1156 src/slic3r/GUI/MainFrame.cpp:1414
#, c-format
msgid "Quit %s"
msgstr "%s afsluiten"

#: src/slic3r/GUI/MainFrame.cpp:1183
msgid "&Select all"
msgstr "Selecteer alles"

#: src/slic3r/GUI/MainFrame.cpp:1184
msgid "Selects all objects"
msgstr "Selecteer alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:1186
msgid "D&eselect all"
msgstr "Deselecteer alles"

#: src/slic3r/GUI/MainFrame.cpp:1187
msgid "Deselects all objects"
msgstr "Deselecteer alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:1190
msgid "&Delete selected"
msgstr "Deselecteer selectie"

#: src/slic3r/GUI/MainFrame.cpp:1191
msgid "Deletes the current selection"
msgstr "Verwijdert huidige selectie"

#: src/slic3r/GUI/MainFrame.cpp:1193
msgid "Delete &all"
msgstr "Verwijder alles"

#: src/slic3r/GUI/MainFrame.cpp:1194
msgid "Deletes all objects"
msgstr "Verwijdert alle objecten"

#: src/slic3r/GUI/MainFrame.cpp:1198
msgid "&Undo"
msgstr "Ongedaan maken"

#: src/slic3r/GUI/MainFrame.cpp:1201
msgid "&Redo"
msgstr "Opnieuw doen"

#: src/slic3r/GUI/MainFrame.cpp:1206
msgid "&Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/MainFrame.cpp:1207
msgid "Copy selection to clipboard"
msgstr "Kopieer selectie naar klembord"

#: src/slic3r/GUI/MainFrame.cpp:1209
msgid "&Paste"
msgstr "Plak"

#: src/slic3r/GUI/MainFrame.cpp:1210
msgid "Paste clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/MainFrame.cpp:1214
msgid "Re&load from disk"
msgstr "Herlaad van schijf"

#: src/slic3r/GUI/MainFrame.cpp:1215
msgid "Reload the plater from disk"
msgstr "Herlaad modellen van schijf"

#: src/slic3r/GUI/MainFrame.cpp:1219
msgid "Searc&h"
msgstr "Zoek"

#: src/slic3r/GUI/MainFrame.cpp:1220
msgid "Search in settings"
msgstr "Zoek in instellingen"

#: src/slic3r/GUI/MainFrame.cpp:1228
msgid "&Plater Tab"
msgstr "Tabblad 3D-weergave"

#: src/slic3r/GUI/MainFrame.cpp:1228
msgid "Show the plater"
msgstr "Toon de 3D-weergave"

#: src/slic3r/GUI/MainFrame.cpp:1233
msgid "P&rint Settings Tab"
msgstr "Tabblad printinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1233
msgid "Show the print settings"
msgstr "Toon de printinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1236 src/slic3r/GUI/MainFrame.cpp:1463
msgid "&Filament Settings Tab"
msgstr "Tabblad filamentinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1236
msgid "Show the filament settings"
msgstr "Toon de filamentinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1240
msgid "Print&er Settings Tab"
msgstr "Tabblad printerinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1240
msgid "Show the printer settings"
msgstr "Toon de printerinstellingen"

#: src/slic3r/GUI/MainFrame.cpp:1246
msgid "3&D"
msgstr "3D-bewerkingsweergave"

#: src/slic3r/GUI/MainFrame.cpp:1246
msgid "Show the 3D editing view"
msgstr "Toon de 3D-bewerkingsweergave"

#: src/slic3r/GUI/MainFrame.cpp:1249
msgid "Pre&view"
msgstr "Voorbeeldweergave"

#: src/slic3r/GUI/MainFrame.cpp:1249
msgid "Show the 3D slices preview"
msgstr "Toon de 3D-weergave van de slice"

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "Print &Host Upload Queue"
msgstr "Printhost uploadwachtrij"

#: src/slic3r/GUI/MainFrame.cpp:1270
msgid "Display the Print Host Upload Queue window"
msgstr "Toon het venster van de printhost uploadwachtrij"

#: src/slic3r/GUI/MainFrame.cpp:1306
msgid "Show &labels"
msgstr "Toon labels"

#: src/slic3r/GUI/MainFrame.cpp:1306
msgid "Show object/instance labels in 3D scene"
msgstr "Toon object-/instantielabels in de 3D weergave"

#: src/slic3r/GUI/MainFrame.cpp:1309
msgid "&Collapse sidebar"
msgstr "Zijbalk inklappen"

#: src/slic3r/GUI/MainFrame.cpp:1309 src/slic3r/GUI/Plater.cpp:2235
msgid "Collapse sidebar"
msgstr "Klap zijbalk in"

#: src/slic3r/GUI/MainFrame.cpp:1359 src/slic3r/GUI/MainFrame.cpp:1369
#: src/slic3r/GUI/MainFrame.cpp:1429
msgid "&File"
msgstr "Bestand"

#: src/slic3r/GUI/MainFrame.cpp:1360 src/slic3r/GUI/MainFrame.cpp:1370
msgid "&Edit"
msgstr "Bewerk"

#: src/slic3r/GUI/MainFrame.cpp:1361 src/slic3r/GUI/MainFrame.cpp:1371
msgid "&Window"
msgstr "Venster"

#: src/slic3r/GUI/MainFrame.cpp:1362 src/slic3r/GUI/MainFrame.cpp:1372
#: src/slic3r/GUI/MainFrame.cpp:1430
msgid "&View"
msgstr "Toon"

#: src/slic3r/GUI/MainFrame.cpp:1365 src/slic3r/GUI/MainFrame.cpp:1375
#: src/slic3r/GUI/MainFrame.cpp:1435
msgid "&Help"
msgstr "&Help"

#: src/slic3r/GUI/MainFrame.cpp:1403
msgid "&Open G-code"
msgstr "&Open G-code"

#: src/slic3r/GUI/MainFrame.cpp:1403
msgid "Open a G-code file"
msgstr "Open een G-code-bestand"

#: src/slic3r/GUI/MainFrame.cpp:1410
msgid "Open &PrusaSlicer"
msgstr "Open &PrusaSlicer"

#: src/slic3r/GUI/MainFrame.cpp:1460
msgid "E&xport"
msgstr "Exporteer"

#: src/slic3r/GUI/MainFrame.cpp:1461
msgid "S&end to print"
msgstr "Stuur om te printen"

#: src/slic3r/GUI/MainFrame.cpp:1463
msgid "Mate&rial Settings Tab"
msgstr "Materiaalinstellingentab"

#: src/slic3r/GUI/MainFrame.cpp:1486
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Kies een STL-, OBJ-, AMF-, 3MF- of PRUSA-bestand om te slicen:"

#: src/slic3r/GUI/MainFrame.cpp:1497
msgid "No previously sliced file."
msgstr "Niet eerder gesliced bestand."

#: src/slic3r/GUI/MainFrame.cpp:1503
msgid "Previously sliced file ("
msgstr "Eerder gesliced bestand ("

#: src/slic3r/GUI/MainFrame.cpp:1503
msgid ") not found."
msgstr ") niet gevonden."

#: src/slic3r/GUI/MainFrame.cpp:1504
msgid "File Not Found"
msgstr "Bestand niet gevonden"

#: src/slic3r/GUI/MainFrame.cpp:1539
#, c-format
msgid "Save %s file as:"
msgstr "%s-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1539
msgid "SVG"
msgstr "SVG"

#: src/slic3r/GUI/MainFrame.cpp:1539
msgid "G-code"
msgstr "G-code"

#: src/slic3r/GUI/MainFrame.cpp:1551
msgid "Save zip file as:"
msgstr "ZIP-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1560 src/slic3r/GUI/Plater.cpp:3013
#: src/slic3r/GUI/Plater.cpp:5350 src/slic3r/GUI/Tab.cpp:1561
#: src/slic3r/GUI/Tab.cpp:4078
msgid "Slicing"
msgstr "Slicen"

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:1562
#, c-format
msgid "Processing %s"
msgstr "%s verwerken"

#: src/slic3r/GUI/MainFrame.cpp:1585
msgid "%1% was successfully sliced."
msgstr "%1% is succesvol gesliced."

#: src/slic3r/GUI/MainFrame.cpp:1587
msgid "Slicing Done!"
msgstr "Slicen klaar!"

#: src/slic3r/GUI/MainFrame.cpp:1602
msgid "Select the STL file to repair:"
msgstr "Selecteer het STL-bestand om te repareren:"

#: src/slic3r/GUI/MainFrame.cpp:1612
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr "OBJ-bestand opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1624
msgid "Your file was repaired."
msgstr "Het bestand is gerepareerd."

#: src/slic3r/GUI/MainFrame.cpp:1624 src/libslic3r/PrintConfig.cpp:3638
msgid "Repair"
msgstr "Repareer"

#: src/slic3r/GUI/MainFrame.cpp:1638
msgid "Save configuration as:"
msgstr "Configuratie opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1657 src/slic3r/GUI/MainFrame.cpp:1719
msgid "Select configuration to load:"
msgstr "Selecteer configuratie om te laden:"

#: src/slic3r/GUI/MainFrame.cpp:1693
msgid "Save presets bundle as:"
msgstr "Presetbundel opslaan als:"

#: src/slic3r/GUI/MainFrame.cpp:1740
#, c-format
msgid "%d presets successfully imported."
msgstr "%d presets succesvol geïmporteerd."

#: src/slic3r/GUI/Mouse3DController.cpp:462
msgid "3Dconnexion settings"
msgstr "3Dconnexion-instellingen"

#: src/slic3r/GUI/Mouse3DController.cpp:473
msgid "Device:"
msgstr "Apparaat:"

#: src/slic3r/GUI/Mouse3DController.cpp:478
msgid "Speed:"
msgstr "Snelheid:"

#: src/slic3r/GUI/Mouse3DController.cpp:481
#: src/slic3r/GUI/Mouse3DController.cpp:502
msgid "Translation"
msgstr "Verplaatsing"

#: src/slic3r/GUI/Mouse3DController.cpp:493
#: src/slic3r/GUI/Mouse3DController.cpp:502
msgid "Zoom"
msgstr "Zoom"

#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Deadzone:"
msgstr "Deadzone:"

#: src/slic3r/GUI/Mouse3DController.cpp:514
msgid "Options:"
msgstr "Opties:"

#: src/slic3r/GUI/Mouse3DController.cpp:517
msgid "Swap Y/Z axes"
msgstr "Wissel Y/Z-assen"

#: src/slic3r/GUI/MsgDialog.cpp:73
#, c-format
msgid "%s error"
msgstr "%s fout"

#: src/slic3r/GUI/MsgDialog.cpp:74
#, c-format
msgid "%s has encountered an error"
msgstr "%s heeft een fout veroorzaakt"

#: src/slic3r/GUI/NotificationManager.hpp:395
msgid "3D Mouse disconnected."
msgstr "3D-muis ontkoppeld."

#: src/slic3r/GUI/NotificationManager.hpp:398
msgid "Configuration update is available."
msgstr "Configuratie-update is beschikbaar."

#: src/slic3r/GUI/NotificationManager.hpp:398
msgid "See more."
msgstr "Zie meer."

#: src/slic3r/GUI/NotificationManager.hpp:400
msgid "New version is available."
msgstr "Nieuwe versie beschikbaar."

#: src/slic3r/GUI/NotificationManager.hpp:400
msgid "See Releases page."
msgstr "Zie Release-pagina."

#: src/slic3r/GUI/NotificationManager.cpp:387
#: src/slic3r/GUI/NotificationManager.cpp:397
msgid "More"
msgstr "Meer"

#: src/slic3r/GUI/NotificationManager.cpp:690
#: src/slic3r/GUI/NotificationManager.cpp:961
msgid "Export G-Code."
msgstr "Exporteer G-code."

#: src/slic3r/GUI/NotificationManager.cpp:734
msgid "Open Folder."
msgstr "Open map."

#: src/slic3r/GUI/NotificationManager.cpp:772
msgid "Eject drive"
msgstr "Schijf uitwerpen"

#: src/slic3r/GUI/NotificationManager.cpp:880
#: src/slic3r/GUI/NotificationManager.cpp:896
#: src/slic3r/GUI/NotificationManager.cpp:907
msgid "ERROR:"
msgstr "Fout:"

#: src/slic3r/GUI/NotificationManager.cpp:885
#: src/slic3r/GUI/NotificationManager.cpp:900
#: src/slic3r/GUI/NotificationManager.cpp:915
msgid "WARNING:"
msgstr "Waarschuwing:"

#: src/slic3r/GUI/NotificationManager.cpp:964
msgid "Slicing finished."
msgstr "Slicen gelukt."

#: src/slic3r/GUI/NotificationManager.cpp:1007
msgid "Exporting finished."
msgstr "Exporteren gelukt."

#: src/slic3r/GUI/ObjectDataViewModel.cpp:58
msgid "Instances"
msgstr "Instanties"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:62
#: src/slic3r/GUI/ObjectDataViewModel.cpp:225
#, c-format
msgid "Instance %d"
msgstr "Instantie %d"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3925
#: src/slic3r/GUI/Tab.cpp:4007
msgid "Layers"
msgstr "Lagen"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
msgid "Range"
msgstr "Bereik"

#: src/slic3r/GUI/OpenGLManager.cpp:259
#, c-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""
"PrusaSlicer vereist een grafische driver die OpenGL 2.0 kan draaien,\n"
"terwijl OpenGL-versie %s, render %s, leverancier %s is gedetecteerd."

#: src/slic3r/GUI/OpenGLManager.cpp:262
msgid "You may need to update your graphics card driver."
msgstr "U moet mogelijk uw grafische kaart updaten."

#: src/slic3r/GUI/OpenGLManager.cpp:265
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
msgstr ""
"Als oplossing kunt u PrusaSlicer draaien met een softwarematig 3D-"
"renderprogramma door prusa-slicer.exe uit te voeren met de --sw_renderer "
"parameter."

#: src/slic3r/GUI/OpenGLManager.cpp:267
msgid "Unsupported OpenGL version"
msgstr "Niet-ondersteunde OpenGL-versie"

#: src/slic3r/GUI/OpenGLManager.cpp:275
#, c-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""
"Kan de volgende sjablonen niet laden:\n"
"%s"

#: src/slic3r/GUI/OpenGLManager.cpp:276
msgid "Error loading shaders"
msgstr "Fout bij het laden van de sjablonen"

#: src/slic3r/GUI/OptionsGroup.cpp:328
msgctxt "Layers"
msgid "Top"
msgstr "Bovenkant"

#: src/slic3r/GUI/OptionsGroup.cpp:328
msgctxt "Layers"
msgid "Bottom"
msgstr "Onderkant"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:51
msgid "Delete this preset from this printer device"
msgstr "Verwijderen van deze preset van deze printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:81
msgid "This printer will be shown in the presets list as"
msgstr "De printer wordt getoond in de presets als"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:155
msgid "Physical Printer"
msgstr "Fysieke printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:161
msgid "Type here the name of your printer device"
msgstr "Type hier de naam van je printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:172
msgid "Descriptive name for the printer"
msgstr "Beschrijvende naam voor de printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Add preset for this printer device"
msgstr "Voeg preset toe voor deze printer"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 src/slic3r/GUI/Tab.cpp:2037
msgid "Print Host upload"
msgstr "Printhost upload"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:260
msgid "Connection to printers connected via the print host failed."
msgstr "Verbinding met printers die via printhost verbonden zijn niet gelukt."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:302
msgid "Test"
msgstr "Test"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:307
msgid "Could not get a valid Printer Host reference"
msgstr "Kan geen geldige printerhost-referentie krijgen"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:319
msgid "Success!"
msgstr "Gelukt!"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:329
msgid "Refresh Printers"
msgstr "Ververs printers"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:356
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS-CA-bestand is optioneel. Het is alleen nodig als u werkt met een zelf "
"ondertekend certificaat."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:366
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "Certificaatbestanden (*.crt, *.pem)|*.crt;*.pem|Alle betanden|*.*"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367
msgid "Open CA certificate file"
msgstr "Open een CA-certificaatbestand"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:395
#: src/libslic3r/PrintConfig.cpp:120
msgid "HTTPS CA File"
msgstr "HTTPS-CA-bestand"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:396
#, c-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
"Op dit systeem gebruikt %s HTTPS-certificaten van de Certificate Store of "
"Keychain."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:397
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"Importeer een CA-bestand in de Certificate Store of Keychain om deze te "
"gebruiken."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:543
msgid "The supplied name is empty. It can't be saved."
msgstr "De ingevoerde naam is leeg. Kan niet opgeslagen worden."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:547
msgid "You should to change a name of your printer device. It can't be saved."
msgstr ""
"Je moet de naam van de printer aanpassen. Het kan niet opgeslagen worden."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:555
msgid "Printer with name \"%1%\" already exists."
msgstr "Printer met naam \"%1%\" bestaat al."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:556
msgid "Replace?"
msgstr "Vervangen?"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:579
msgid ""
"Following printer preset(s) is duplicated:%1%The above preset for printer "
"\"%2%\" will be used just once."
msgstr ""
"De volgende printerpreset(s) zijn overgenomen: %1% De bovenstaande preset "
"voor printer \"%2%\" wordt eenmalig gebruikt."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:625
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""
"Het is niet mogelijk om de laatst gerelateerde preset voor de printer te "
"verwijderen."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:626
msgid "Infornation"
msgstr "Informatie"

#: src/slic3r/GUI/Plater.cpp:162
msgid "Volume"
msgstr "Volume"

#: src/slic3r/GUI/Plater.cpp:163
msgid "Facets"
msgstr "Vlakken"

#: src/slic3r/GUI/Plater.cpp:164
msgid "Materials"
msgstr "Materialen"

#: src/slic3r/GUI/Plater.cpp:167
msgid "Manifold"
msgstr "Gesloten model"

#: src/slic3r/GUI/Plater.cpp:217
msgid "Sliced Info"
msgstr "Slice info"

#: src/slic3r/GUI/Plater.cpp:236 src/slic3r/GUI/Plater.cpp:1143
msgid "Used Filament (m)"
msgstr "Filamentverbruik (m)"

#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1155
msgid "Used Filament (mm³)"
msgstr "Filamentverbruik (mm³)"

#: src/slic3r/GUI/Plater.cpp:238
msgid "Used Filament (g)"
msgstr "Filamentverbruik (g)"

#: src/slic3r/GUI/Plater.cpp:239
msgid "Used Material (unit)"
msgstr "Materiaalverbruik (eenheid)"

#: src/slic3r/GUI/Plater.cpp:240
msgid "Cost (money)"
msgstr "Kosten (€)"

#: src/slic3r/GUI/Plater.cpp:242
msgid "Number of tool changes"
msgstr "Aantal toolwisselingen"

#: src/slic3r/GUI/Plater.cpp:359
msgid "Select what kind of support do you need"
msgstr "Selecteer welk type support nodig is"

#: src/slic3r/GUI/Plater.cpp:361 src/libslic3r/PrintConfig.cpp:2034
#: src/libslic3r/PrintConfig.cpp:2829
msgid "Support on build plate only"
msgstr "Support alleen op het bed"

#: src/slic3r/GUI/Plater.cpp:362 src/slic3r/GUI/Plater.cpp:485
msgid "For support enforcers only"
msgstr "Alleen voor supportforceringen"

#: src/slic3r/GUI/Plater.cpp:363
msgid "Everywhere"
msgstr "Overal"

#: src/slic3r/GUI/Plater.cpp:395 src/slic3r/GUI/Tab.cpp:1455
msgid "Brim"
msgstr "Brim"

#: src/slic3r/GUI/Plater.cpp:397
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr "Door dit aan te vinken zal een brim rond elke object geprint worden."

#: src/slic3r/GUI/Plater.cpp:405
msgid "Purging volumes"
msgstr "Afveegvolume"

#: src/slic3r/GUI/Plater.cpp:499
msgid "Select what kind of pad do you need"
msgstr "Selecteer welk soort basisplaat nodig is"

#: src/slic3r/GUI/Plater.cpp:501
msgid "Below object"
msgstr "Onder het object"

#: src/slic3r/GUI/Plater.cpp:502
msgid "Around object"
msgstr "Rondom het object"

#: src/slic3r/GUI/Plater.cpp:687
msgid "SLA print settings"
msgstr "SLA-printinstellingen"

#: src/slic3r/GUI/Plater.cpp:748 src/slic3r/GUI/Plater.cpp:5850
msgid "Send to printer"
msgstr "Stuur naar printer"

#: src/slic3r/GUI/Plater.cpp:763 src/slic3r/GUI/Plater.cpp:3013
#: src/slic3r/GUI/Plater.cpp:5353
msgid "Slice now"
msgstr "Slice nu"

#: src/slic3r/GUI/Plater.cpp:918
msgid "Hold Shift to Slice & Export G-code"
msgstr "Houdt shift ingedrukt om te slicen en de G-code te exporteren"

#: src/slic3r/GUI/Plater.cpp:1063
#, c-format
msgid "%d (%d shells)"
msgstr "%d (%d shells)"

#: src/slic3r/GUI/Plater.cpp:1068
#, c-format
msgid "Auto-repaired (%d errors)"
msgstr "Automatisch gerepareerd (%d fouten)"

#: src/slic3r/GUI/Plater.cpp:1071
#, c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""
"%d degenereer vlakken, %d randen vastgezet, %d vlakken verwijderd, %d "
"vlakken toegevoegd, %d vlakken omgekeerd, %d randen omgekeerd"

#: src/slic3r/GUI/Plater.cpp:1081
msgid "Yes"
msgstr "JA"

#: src/slic3r/GUI/Plater.cpp:1102
msgid "Used Material (ml)"
msgstr "Materiaalgebruik (ml)"

#: src/slic3r/GUI/Plater.cpp:1105
msgid "object(s)"
msgstr "object(en)"

#: src/slic3r/GUI/Plater.cpp:1105
msgid "supports and pad"
msgstr "support en basisplaat"

#: src/slic3r/GUI/Plater.cpp:1143
msgid "Used Filament (in)"
msgstr "Gebruikt filament (in)"

#: src/slic3r/GUI/Plater.cpp:1145 src/slic3r/GUI/Plater.cpp:1162
msgid "objects"
msgstr "objecten"

#: src/slic3r/GUI/Plater.cpp:1145 src/slic3r/GUI/Plater.cpp:1162
msgid "wipe tower"
msgstr "afveegblok"

#: src/slic3r/GUI/Plater.cpp:1155
msgid "Used Filament (in³)"
msgstr "Gebruikt filament (in³)"

#: src/slic3r/GUI/Plater.cpp:1160 src/libslic3r/PrintConfig.cpp:803
#: src/libslic3r/PrintConfig.cpp:2644 src/libslic3r/PrintConfig.cpp:2645
msgid "Cost"
msgstr "Kosten"

#: src/slic3r/GUI/Plater.cpp:1179 src/slic3r/GUI/Plater.cpp:1226
msgid "normal mode"
msgstr "normale modus"

#: src/slic3r/GUI/Plater.cpp:1189 src/slic3r/GUI/Plater.cpp:1237
msgid "stealth mode"
msgstr "stille modus"

#: src/slic3r/GUI/Plater.cpp:1200 src/libslic3r/PrintConfig.cpp:625
msgid "Color"
msgstr "Kleur"

#: src/slic3r/GUI/Plater.cpp:1410
#, c-format
msgid "%s - Drop project file"
msgstr "%s - Plaats projectbestand"

#: src/slic3r/GUI/Plater.cpp:1417
msgid "Open as project"
msgstr "Open als project"

#: src/slic3r/GUI/Plater.cpp:1418
msgid "Import geometry only"
msgstr "Importeer alleen het model"

#: src/slic3r/GUI/Plater.cpp:1419
msgid "Import config only"
msgstr "Importeer alleen de configuratie"

#: src/slic3r/GUI/Plater.cpp:1422
msgid "Select an action to apply to the file"
msgstr "Selecteer een commando om toe te passen op het bestand"

#: src/slic3r/GUI/Plater.cpp:1423
msgid "Action"
msgstr "Commando"

#: src/slic3r/GUI/Plater.cpp:1431
msgid "Don't show again"
msgstr "Laat niet meer zien"

#: src/slic3r/GUI/Plater.cpp:1471
msgid "You can open only one .gcode file at a time."
msgstr "Je kunt maar één gcode-bestand tegelijk openen."

#: src/slic3r/GUI/Plater.cpp:1472
msgid "Drag and drop G-code file"
msgstr "Versleep en plaats G-code-bestand"

#: src/slic3r/GUI/Plater.cpp:1528 src/slic3r/GUI/Plater.cpp:4753
msgid "Import Object"
msgstr "Importeer object"

#: src/slic3r/GUI/Plater.cpp:1639
msgid "Optimize Rotation"
msgstr "Optimaliseer rotatie"

#: src/slic3r/GUI/Plater.cpp:1645
msgid "Import SLA archive"
msgstr "Importeer SLA-archief"

#: src/slic3r/GUI/Plater.cpp:2123
#, c-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""
"Succesvol ontkoppeld. Het apparat %s(%s) kan nu veilig worden verwijderd uit "
"de computer."

#: src/slic3r/GUI/Plater.cpp:2126
#, c-format
msgid "Ejecting of device %s(%s) has failed."
msgstr "Uitwerpen van apparat %s(%s) mislukt."

#: src/slic3r/GUI/Plater.cpp:2147
msgid "New Project"
msgstr "Nieuw project"

#: src/slic3r/GUI/Plater.cpp:2234
msgid "Expand sidebar"
msgstr "Zijbalk uitklappen"

#: src/slic3r/GUI/Plater.cpp:2307
msgid "Loading"
msgstr "Aan het laden"

#: src/slic3r/GUI/Plater.cpp:2317
msgid "Loading file"
msgstr "Bestand laden"

#: src/slic3r/GUI/Plater.cpp:2400
#, c-format
msgid ""
"Some object(s) in file %s looks like saved in inches.\n"
"Should I consider them as a saved in inches and convert them?"
msgstr ""
"Sommige objecten in bestand %s lijken te zijn opgeslagen in inches.\n"
"Moeten deze zodanig beschouwd en omgezet worden?"

#: src/slic3r/GUI/Plater.cpp:2402
msgid "The object appears to be saved in inches"
msgstr "Het object lijkt te zijn opgeslagen in inches"

#: src/slic3r/GUI/Plater.cpp:2410
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?"
msgstr ""
"Dit bestand bevat meerdere objecten die op meerdere hoogten zijn "
"gepositioneerd.\n"
"Moet dit bestand beschouwd worden als een enkel object met meerdere "
"onderdelen\n"
"in plaats van als meerdere objecten?"

#: src/slic3r/GUI/Plater.cpp:2413 src/slic3r/GUI/Plater.cpp:2466
msgid "Multi-part object detected"
msgstr "Meerdelig object gedetecteerd"

#: src/slic3r/GUI/Plater.cpp:2420
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""
"Dit bestand kan niet geladen worden in eenvoudige modus. Wilt u overstappen "
"op geavanceerde modus?"

#: src/slic3r/GUI/Plater.cpp:2421
msgid "Detected advanced data"
msgstr "Geavanceerde data gedetecteerd"

#: src/slic3r/GUI/Plater.cpp:2443
#, c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""
"U kan geen objecten toevoegen van %s, omdat sommige daarvan meerdelig kunnen "
"zijn"

#: src/slic3r/GUI/Plater.cpp:2463
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""
"Meerdere objecten zijn geladen voor een multi-materialprinter.\n"
"Moeten deze objecten beschouwd worden als één object\n"
"met meerdere onderdelen, of als meerdere objecten?"

#: src/slic3r/GUI/Plater.cpp:2479
msgid "Loaded"
msgstr "Geladen"

#: src/slic3r/GUI/Plater.cpp:2581
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""
"Het object is te groot. Daarom is het automatisch verschaald tot de grootte "
"van het printbed."

#: src/slic3r/GUI/Plater.cpp:2582
msgid "Object too large?"
msgstr "Object te groot?"

#: src/slic3r/GUI/Plater.cpp:2644
msgid "Export STL file:"
msgstr "Exporteer STL-bestand:"

#: src/slic3r/GUI/Plater.cpp:2651
msgid "Export AMF file:"
msgstr "Exporteer AMF-bestand:"

#: src/slic3r/GUI/Plater.cpp:2657
msgid "Save file as:"
msgstr "Bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:2663
msgid "Export OBJ file:"
msgstr "Exporteer OBJ-bestand:"

#: src/slic3r/GUI/Plater.cpp:2764
msgid "Delete Object"
msgstr "Verwijder object"

#: src/slic3r/GUI/Plater.cpp:2775
msgid "Reset Project"
msgstr "Reset project"

#: src/slic3r/GUI/Plater.cpp:2854
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""
"Het geselecteerde object kan niet opgedeeld worden omdat het meer dan één "
"volume bevat."

#: src/slic3r/GUI/Plater.cpp:2865
msgid "Split to Objects"
msgstr "Splits op naar objecten"

#: src/slic3r/GUI/Plater.cpp:2997 src/slic3r/GUI/Plater.cpp:3680
msgid "Invalid data"
msgstr "Ongeldige data"

#: src/slic3r/GUI/Plater.cpp:3007
msgid "Ready to slice"
msgstr "Klaar om te slicen"

#: src/slic3r/GUI/Plater.cpp:3045 src/slic3r/GUI/PrintHostDialogs.cpp:260
msgid "Cancelling"
msgstr "Annuleren"

#: src/slic3r/GUI/Plater.cpp:3064
msgid "Another export job is currently running."
msgstr "Een andere export loopt op dit moment."

#: src/slic3r/GUI/Plater.cpp:3181
msgid "Please select the file to reload"
msgstr "Selecteer het bestand om te herladen"

#: src/slic3r/GUI/Plater.cpp:3216
msgid "It is not allowed to change the file to reload"
msgstr "Het is niet toegestaan om het te laden bestand te wijzigen"

#: src/slic3r/GUI/Plater.cpp:3216
msgid "Do you want to retry"
msgstr "Wilt u dit opnieuw proberen"

#: src/slic3r/GUI/Plater.cpp:3234
msgid "Reload from:"
msgstr "Herladen van:"

#: src/slic3r/GUI/Plater.cpp:3325
msgid "Unable to reload:"
msgstr "Niet in staat om te herladen:"

#: src/slic3r/GUI/Plater.cpp:3330
msgid "Error during reload"
msgstr "Fout tijdens herladen"

#: src/slic3r/GUI/Plater.cpp:3349
msgid "Reload all from disk"
msgstr "Herlaad alles van schijf"

#: src/slic3r/GUI/Plater.cpp:3370
msgid "Fix Throught NetFabb"
msgstr "Repareer met NetFabb"

#: src/slic3r/GUI/Plater.cpp:3638
msgid "There are active warnings concerning sliced models:"
msgstr "Er zijn actieve waarschuwingen wat betreft de slice:"

#: src/slic3r/GUI/Plater.cpp:3649
msgid "generated warnings"
msgstr "gegeven waarschuwingen"

#: src/slic3r/GUI/Plater.cpp:3688 src/slic3r/GUI/PrintHostDialogs.cpp:261
msgid "Cancelled"
msgstr "Geannuleerd"

#: src/slic3r/GUI/Plater.cpp:3950 src/slic3r/GUI/Plater.cpp:3972
msgid "Remove the selected object"
msgstr "Verwijder het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:3959
msgid "Add one more instance of the selected object"
msgstr "Voeg een instantie van het geselecteerde object toe"

#: src/slic3r/GUI/Plater.cpp:3961
msgid "Remove one instance of the selected object"
msgstr "Verwijder een instantie van het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:3963
msgid "Set number of instances"
msgstr "Stel aantal instanties in"

#: src/slic3r/GUI/Plater.cpp:3963
msgid "Change the number of instances of the selected object"
msgstr "Wijzig het aantal instanties van het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:3982
msgid "Reload the selected object from disk"
msgstr "Herlaad het geselecteerde object van de schijf"

#: src/slic3r/GUI/Plater.cpp:3985
msgid "Export the selected object as STL file"
msgstr "Exporteer de geselecteerde objecten als STL-bestand"

#: src/slic3r/GUI/Plater.cpp:4016
msgid "Along X axis"
msgstr "Over de X-as"

#: src/slic3r/GUI/Plater.cpp:4016
msgid "Mirror the selected object along the X axis"
msgstr "Spiegel het geselecteerde object over de X-as"

#: src/slic3r/GUI/Plater.cpp:4018
msgid "Along Y axis"
msgstr "Over de Y-as"

#: src/slic3r/GUI/Plater.cpp:4018
msgid "Mirror the selected object along the Y axis"
msgstr "Spiegel het geselecteerde object over de Y-as"

#: src/slic3r/GUI/Plater.cpp:4020
msgid "Along Z axis"
msgstr "Over de Z-as"

#: src/slic3r/GUI/Plater.cpp:4020
msgid "Mirror the selected object along the Z axis"
msgstr "Spiegel het geselecteerde object over de Z-as"

#: src/slic3r/GUI/Plater.cpp:4023
msgid "Mirror"
msgstr "Spiegelen"

#: src/slic3r/GUI/Plater.cpp:4023
msgid "Mirror the selected object"
msgstr "Spiegel het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:4035
msgid "To objects"
msgstr "Aan objecten"

#: src/slic3r/GUI/Plater.cpp:4035 src/slic3r/GUI/Plater.cpp:4055
msgid "Split the selected object into individual objects"
msgstr "Verdeel het geselecteerde object in individuele objecten"

#: src/slic3r/GUI/Plater.cpp:4037
msgid "To parts"
msgstr "Aan onderdelen"

#: src/slic3r/GUI/Plater.cpp:4037 src/slic3r/GUI/Plater.cpp:4073
msgid "Split the selected object into individual sub-parts"
msgstr "Deel het geselecteerde object op in meerdere subonderdelen"

#: src/slic3r/GUI/Plater.cpp:4040 src/slic3r/GUI/Plater.cpp:4055
#: src/slic3r/GUI/Plater.cpp:4073 src/libslic3r/PrintConfig.cpp:3662
msgid "Split"
msgstr "Splits"

#: src/slic3r/GUI/Plater.cpp:4040
msgid "Split the selected object"
msgstr "Verdeel het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:4062
msgid "Optimize orientation"
msgstr "Optimaliseer oriëntatie"

#: src/slic3r/GUI/Plater.cpp:4063
msgid "Optimize the rotation of the object for better print results."
msgstr "Optimaliseer de rotatie van het object voor betere printresultaten."

#: src/slic3r/GUI/Plater.cpp:4145
msgid "3D editor view"
msgstr "3&D-bewerkingsweergave"

#: src/slic3r/GUI/Plater.cpp:4521
msgid ""
"%1% printer was active at the time the target Undo / Redo snapshot was "
"taken. Switching to %1% printer requires reloading of %1% presets."
msgstr ""
"%1% de printer was actief op het moment een 'ongedaan maken'- of 'opnieuw "
"doen'-snapshot werd genomen. Schakelen naar %1% printer vereist herladen van "
"%1% presets."

#: src/slic3r/GUI/Plater.cpp:4725
msgid "Load Project"
msgstr "Laad project"

#: src/slic3r/GUI/Plater.cpp:4757
msgid "Import Objects"
msgstr "Importeer objecten"

#: src/slic3r/GUI/Plater.cpp:4827
msgid "The selected file"
msgstr "Het geselecteerde bestand"

#: src/slic3r/GUI/Plater.cpp:4827
msgid "does not contain valid gcode."
msgstr "bevat geen geldige G-code."

#: src/slic3r/GUI/Plater.cpp:4828
msgid "Error while loading .gcode file"
msgstr "Probleem bij het laden van het gcode-bestand"

#: src/slic3r/GUI/Plater.cpp:4882
msgid "All objects will be removed, continue?"
msgstr "Alle objecten worden verwijderd. Doorgaan?"

#: src/slic3r/GUI/Plater.cpp:4890
msgid "Delete Selected Objects"
msgstr "Verwijder geselecteerde objecten"

#: src/slic3r/GUI/Plater.cpp:4898
msgid "Increase Instances"
msgstr "Verhoog aantal instanties"

#: src/slic3r/GUI/Plater.cpp:4932
msgid "Decrease Instances"
msgstr "Verlaag aantal instanties"

#: src/slic3r/GUI/Plater.cpp:4963
msgid "Enter the number of copies:"
msgstr "Voer het aantal kopieën in:"

#: src/slic3r/GUI/Plater.cpp:4964
msgid "Copies of the selected object"
msgstr "Kopieën van het geselecteerde object"

#: src/slic3r/GUI/Plater.cpp:4968
#, c-format
msgid "Set numbers of copies to %d"
msgstr "Stel aantal kopieën in voor %d"

#: src/slic3r/GUI/Plater.cpp:5029
msgid "Cut by Plane"
msgstr "Snij met behulp van vlak"

#: src/slic3r/GUI/Plater.cpp:5083
msgid "Save G-code file as:"
msgstr "G-code-bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:5083
msgid "Save SL1 file as:"
msgstr "SL1-bestand opslaan als:"

#: src/slic3r/GUI/Plater.cpp:5230
#, c-format
msgid "STL file exported to %s"
msgstr "STL-bestand geëxporteerd naar %s"

#: src/slic3r/GUI/Plater.cpp:5247
#, c-format
msgid "AMF file exported to %s"
msgstr "AMF-bestand geëxporteerd naar %s"

#: src/slic3r/GUI/Plater.cpp:5250
#, c-format
msgid "Error exporting AMF file %s"
msgstr "Fout bij het exporteren van AMF-bestand %s"

#: src/slic3r/GUI/Plater.cpp:5279
#, c-format
msgid "3MF file exported to %s"
msgstr "3MF-bestand geëxporteerd naar %s"

#: src/slic3r/GUI/Plater.cpp:5284
#, c-format
msgid "Error exporting 3MF file %s"
msgstr "Fout bij het exporteren van 3MF-bestand %s"

#: src/slic3r/GUI/Plater.cpp:5849
msgid "Export"
msgstr "Exporteer"

#: src/slic3r/GUI/Plater.cpp:5946
msgid "Paste From Clipboard"
msgstr "Plak van klembord"

#: src/slic3r/GUI/Preferences.cpp:24 src/slic3r/GUI/Tab.cpp:2071
#: src/slic3r/GUI/Tab.cpp:2253 src/slic3r/GUI/Tab.cpp:2361
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
msgid "General"
msgstr "Algemeen"

#: src/slic3r/GUI/Preferences.cpp:52
msgid "Remember output directory"
msgstr "Onthoud de opslaglocatie"

#: src/slic3r/GUI/Preferences.cpp:54
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"Als dit aan staat zal PrusaSlicer de opslaglocatie gebruiken in plaats van "
"de originele locatie."

#: src/slic3r/GUI/Preferences.cpp:64
msgid "Auto-center parts"
msgstr "Centreer onderdelen automatisch"

#: src/slic3r/GUI/Preferences.cpp:66
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""
"Als dit aan staat zal PrusaSlicer objecten automatisch centreren rond het "
"midden."

#: src/slic3r/GUI/Preferences.cpp:72
msgid "Background processing"
msgstr "Slicen op de achtergrond"

#: src/slic3r/GUI/Preferences.cpp:74
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"Als dit aanstaat zal PrusaSlicer objecten op de achtergrond slicen om tijd "
"te besparen bij het exporteren van de G-code."

#: src/slic3r/GUI/Preferences.cpp:83
msgid ""
"If enabled, PrusaSlicer will check for the new versions of itself online. "
"When a new version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"Als dit aanstaat zal PrusaSlicer zelf controleren op nieuwe versies. Als een "
"nieuwe versie beschikbaar is, wordt een melding weergegeven bij de volgende "
"keer opstarten. Dit is slechts een melding; er wordt niets automatisch "
"geïnstalleerd."

#: src/slic3r/GUI/Preferences.cpp:89
msgid "Export sources full pathnames to 3mf and amf"
msgstr "Exporteer de volledige padnamen naar 3MF- en AMF-bestanden"

#: src/slic3r/GUI/Preferences.cpp:91
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""
"Als dit is ingeschakeld is het 'herladen van de schijf'-commando toegestaan "
"om automatisch bestanden te vinden en laden als deze worden aangeroepen."

#: src/slic3r/GUI/Preferences.cpp:99
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer updates of ingebouwde presets op de "
"achtergrond downloaden. Deze updates worden gedownload naar een tijdelijke "
"locatie. Als een nieuwe preset beschikbaar komt, zal dit gemeld worden bij "
"de eerstvolgende keer opstarten."

#: src/slic3r/GUI/Preferences.cpp:104
msgid "Suppress \" - default - \" presets"
msgstr "Verberg standaardpresets"

#: src/slic3r/GUI/Preferences.cpp:106
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"Verberg standaardpresets bij de print-, filament- en printerpresets als er "
"andere geldige presets beschikbaar zijn."

#: src/slic3r/GUI/Preferences.cpp:112
msgid "Show incompatible print and filament presets"
msgstr "Toon niet geschikte print- en filamentpresets"

#: src/slic3r/GUI/Preferences.cpp:114
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"Als dit aan staat worden de print- en filamentpresets getoond in de presets-"
"editor, zelfs als ze als niet geschikt voor de actieve printer zijn "
"gemarkeerd"

#: src/slic3r/GUI/Preferences.cpp:120
msgid "Show drop project dialog"
msgstr "Toon plaats project venster"

#: src/slic3r/GUI/Preferences.cpp:122
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application, shows a dialog asking to select the action to take on the file "
"to load."
msgstr ""
"Als dit aan staat wordt bij het slepen en plaatsen van een projectbestand "
"een venster getond met de vraag wat gedaan moet worden met het te laden "
"bestand."

#: src/slic3r/GUI/Preferences.cpp:127 src/libslic3r/PrintConfig.cpp:3689
msgid "Single instance mode"
msgstr "Enkele instantiemodus"

#: src/slic3r/GUI/Preferences.cpp:130
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""
"Op OSX draait er altijd slechts één instantie van het programma. Het is "
"mogelijk om meerdere instanties van hetzelfde programma te draaien via het "
"commandoprompt. In zulke gevallen geldt deze instelling slechts voor één "
"instantie."

#: src/slic3r/GUI/Preferences.cpp:132
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""
"Als dit is ingeschakeld zal PrusaSlicer een andere instantie van PrusaSlicer "
"openen als die wordt gestart."

#: src/slic3r/GUI/Preferences.cpp:142
msgid "Use Retina resolution for the 3D scene"
msgstr "Gebruik hoge resolutie voor de 3D-scène"

#: src/slic3r/GUI/Preferences.cpp:144
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"Als dit is ingeschakeld zal de 3D-scène worden gerenderd in hoge resolutie. "
"Als u problemen ondervindt met de prestaties kan het uitschakelen van deze "
"optie mogelijk helpen."

#: src/slic3r/GUI/Preferences.cpp:161
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:659
msgid "Ask for unsaved changes when closing application"
msgstr "Vraag naar niet-opgeslagen wijzigingen bij het afsluiten"

#: src/slic3r/GUI/Preferences.cpp:163
msgid "When closing the application, always ask for unsaved changes"
msgstr ""
"Vraag altijd naar niet-opgeslagen wijzigingen als het programma wordt "
"afgesloten"

#: src/slic3r/GUI/Preferences.cpp:168
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:660
msgid "Ask for unsaved changes when selecting new preset"
msgstr ""
"Vraag naar niet-opgeslagen wijzigingen bij het selecteren van een nieuwe "
"preset"

#: src/slic3r/GUI/Preferences.cpp:170
msgid "Always ask for unsaved changes when selecting new preset"
msgstr ""
"Vraag altijd om niet-opgeslagen wijzigingen bij het selecteren van een "
"nieuwe preset"

#: src/slic3r/GUI/Preferences.cpp:176 src/slic3r/GUI/Preferences.cpp:178
msgid "Show splash screen"
msgstr "Toon projectiescherm"

#: src/slic3r/GUI/Preferences.cpp:185
msgid "Camera"
msgstr "Camera"

#: src/slic3r/GUI/Preferences.cpp:191
msgid "Use perspective camera"
msgstr "Gebruik perspectiefweergave"

#: src/slic3r/GUI/Preferences.cpp:193
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""
"Als dit is ingeschakeld zal de weergave op perspectief worden gezet. Anders "
"wordt een orthografische weergave gebruikt."

#: src/slic3r/GUI/Preferences.cpp:198
msgid "Use free camera"
msgstr "Gebruik vrij beweegbare camera"

#: src/slic3r/GUI/Preferences.cpp:200
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""
"Als dit is ingeschakeld wordt de vrij beweegbare camera gebruikt, anders een "
"vaste camera."

#: src/slic3r/GUI/Preferences.cpp:205
msgid "Reverse direction of zoom with mouse wheel"
msgstr "Zoomrichting van scrollwieltje omkeren"

#: src/slic3r/GUI/Preferences.cpp:207
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr "Als dit aanstaat wordt de scrollrichting de andere kant op ingesteld"

#: src/slic3r/GUI/Preferences.cpp:214
msgid "GUI"
msgstr "GUI"

#: src/slic3r/GUI/Preferences.cpp:227
msgid "Show sidebar collapse/expand button"
msgstr "Toon zijbalk in-/uitklappen-knop"

#: src/slic3r/GUI/Preferences.cpp:229
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""
"Als dit is ingeschakeld zal de knop om de zijbalk in te klappen getoond "
"worden in de rechterbovenhoek van de 3D-bewerkingsweergave"

#: src/slic3r/GUI/Preferences.cpp:234
msgid "Use custom size for toolbar icons"
msgstr "Aangepaste pictogramgrootte in de 3D-weergave"

#: src/slic3r/GUI/Preferences.cpp:236
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""
"Hiermee kan de grootte van werkbalkpictogrammen handmatig ingesteld worden."

#: src/slic3r/GUI/Preferences.cpp:243
msgid "Sequential slider applied only to top layer"
msgstr "Opeenvolgende schuif alleen toegepast op toplaag"

#: src/slic3r/GUI/Preferences.cpp:245
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer. If disabled, changes made using the sequential slider, "
"in preview, apply to the whole gcode."
msgstr ""
"Sta toe om wijzigingen van de opeenvolgende schuif in de voorbeeldweergave "
"alleen toe te passen op de toplaag. Als dit uitstaat worden wijzigingen "
"toegepast op de hele G-code."

#: src/slic3r/GUI/Preferences.cpp:269
msgid "Render"
msgstr "Render"

#: src/slic3r/GUI/Preferences.cpp:275
msgid "Use environment map"
msgstr "Gebruik omgevingskaart"

#: src/slic3r/GUI/Preferences.cpp:277
msgid "If enabled, renders object using the environment map."
msgstr "Als dit aanstaat worden objecten gerenderd met de omgevingskaart."

#: src/slic3r/GUI/Preferences.cpp:313
#, c-format
msgid "You need to restart %s to make the changes effective."
msgstr "U moet %s opnieuw opstarten om wijzigingen door te voeren."

#: src/slic3r/GUI/Preferences.cpp:390
msgid "Icon size in a respect to the default size"
msgstr "Pictogramgrootte vergeleken met de originele grootte"

#: src/slic3r/GUI/Preferences.cpp:405
msgid "Select toolbar icon size in respect to the default one."
msgstr "Selecteer werkbalk-pictogramgrootte in verhouding tot de originele."

#: src/slic3r/GUI/Preferences.cpp:436
msgid "Old regular layout with the tab bar"
msgstr "Oude standaardlayout met de tabbladen"

#: src/slic3r/GUI/Preferences.cpp:437
msgid "New layout, access via settings button in the top menu"
msgstr ""
"Nieuwe layout, krijg toegang tot de instellingen via de instellingenknop in "
"het topmenu"

#: src/slic3r/GUI/Preferences.cpp:438
msgid "Settings in non-modal window"
msgstr "Instelling voor niet-modaal venster"

#: src/slic3r/GUI/Preferences.cpp:447
msgid "Layout Options"
msgstr "Layout-opties"

#: src/slic3r/GUI/PresetComboBoxes.cpp:188
#: src/slic3r/GUI/PresetComboBoxes.cpp:226
#: src/slic3r/GUI/PresetComboBoxes.cpp:752
#: src/slic3r/GUI/PresetComboBoxes.cpp:802
#: src/slic3r/GUI/PresetComboBoxes.cpp:916
#: src/slic3r/GUI/PresetComboBoxes.cpp:960
msgid "System presets"
msgstr "Systeempresets"

#: src/slic3r/GUI/PresetComboBoxes.cpp:230
#: src/slic3r/GUI/PresetComboBoxes.cpp:806
#: src/slic3r/GUI/PresetComboBoxes.cpp:964
msgid "User presets"
msgstr "Presets van de gebruiker"

#: src/slic3r/GUI/PresetComboBoxes.cpp:241
msgid "Incompatible presets"
msgstr "Ongeschikte presets"

#: src/slic3r/GUI/PresetComboBoxes.cpp:276
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr "Weet je zeker dat je \"%1%\"-printer wilt verwijderen?"

#: src/slic3r/GUI/PresetComboBoxes.cpp:278
msgid "Delete Physical Printer"
msgstr "Verwijder fysieke printer"

#: src/slic3r/GUI/PresetComboBoxes.cpp:615
msgid "Click to edit preset"
msgstr "Klik om de preset te wijzigen"

#: src/slic3r/GUI/PresetComboBoxes.cpp:671
#: src/slic3r/GUI/PresetComboBoxes.cpp:701
msgid "Add/Remove presets"
msgstr "Toevoegen/verwijderen van presets"

#: src/slic3r/GUI/PresetComboBoxes.cpp:676
#: src/slic3r/GUI/PresetComboBoxes.cpp:706 src/slic3r/GUI/Tab.cpp:2958
msgid "Add physical printer"
msgstr "Voeg fysieke printer toe"

#: src/slic3r/GUI/PresetComboBoxes.cpp:690
msgid "Edit preset"
msgstr "Bewerk preset"

#: src/slic3r/GUI/PresetComboBoxes.cpp:694 src/slic3r/GUI/Tab.cpp:2958
msgid "Edit physical printer"
msgstr "Bewerk fysieke printer"

#: src/slic3r/GUI/PresetComboBoxes.cpp:697
msgid "Delete physical printer"
msgstr "Verwijder fysieke printer"

#: src/slic3r/GUI/PresetComboBoxes.cpp:817
#: src/slic3r/GUI/PresetComboBoxes.cpp:978
msgid "Physical printers"
msgstr "Fysieke printers"

#: src/slic3r/GUI/PresetComboBoxes.cpp:841
msgid "Add/Remove filaments"
msgstr "Verwijder of voeg filamenten toe"

#: src/slic3r/GUI/PresetComboBoxes.cpp:843
msgid "Add/Remove materials"
msgstr "Verwijder of voeg materialen toe"

#: src/slic3r/GUI/PresetComboBoxes.cpp:845
#: src/slic3r/GUI/PresetComboBoxes.cpp:1002
msgid "Add/Remove printers"
msgstr "Voeg toe/verwijder printers"

#: src/slic3r/GUI/PresetHints.cpp:28
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""
"Als de geschatte laagtijd onder de ~%1%s komt, zal de ventilator draaien op "
"%2%%% en de printsnelheid wordt zover gereduceerd dat niet meer dan %3%s "
"worden gebruikt voor die laag (echter nooit langzamer dan %4%mm/s)."

#: src/slic3r/GUI/PresetHints.cpp:35
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""
"Als de geschatte laagtijd groter is, maar nog steeds onder de ~%1%s, zal de "
"ventilator draaien op een proportioneel verlagende snelheid tussen %2%%% en "
"%3%%%."

#: src/slic3r/GUI/PresetHints.cpp:39
msgid "During the other layers, fan"
msgstr "Tijdens de overige lagen zal de ventilator"

#: src/slic3r/GUI/PresetHints.cpp:41
msgid "Fan"
msgstr "De ventilator zal"

#: src/slic3r/GUI/PresetHints.cpp:47
msgid "will always run at %1%%%"
msgstr "altijd draaien op %1%%%"

#: src/slic3r/GUI/PresetHints.cpp:50
msgid "except for the first %1% layers."
msgstr "behalve voor de eerste %1% lagen."

#: src/slic3r/GUI/PresetHints.cpp:52
msgid "except for the first layer."
msgstr "behalve voor de eerste laag."

#: src/slic3r/GUI/PresetHints.cpp:54
msgid "will be turned off."
msgstr "wordt uitgeschakeld."

#: src/slic3r/GUI/PresetHints.cpp:155
msgid "external perimeters"
msgstr "buitenperimeters"

#: src/slic3r/GUI/PresetHints.cpp:164
msgid "perimeters"
msgstr "perimeters"

#: src/slic3r/GUI/PresetHints.cpp:173
msgid "infill"
msgstr "vulling"

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "solid infill"
msgstr "dichte vulling"

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "top solid infill"
msgstr "bovenste dichte vulling"

#: src/slic3r/GUI/PresetHints.cpp:202
msgid "support"
msgstr "support"

#: src/slic3r/GUI/PresetHints.cpp:212
msgid "support interface"
msgstr "supportinterface"

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "First layer volumetric"
msgstr "Eerste laag volumetrisch"

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "Bridging volumetric"
msgstr "Volumetrische bruggen"

#: src/slic3r/GUI/PresetHints.cpp:218
msgid "Volumetric"
msgstr "Volumetrisch"

#: src/slic3r/GUI/PresetHints.cpp:219
msgid "flow rate is maximized"
msgstr "debiet is gemaximaliseerd"

#: src/slic3r/GUI/PresetHints.cpp:222
msgid "by the print profile maximum"
msgstr "door het printprofiel maximaal"

#: src/slic3r/GUI/PresetHints.cpp:223
msgid "when printing"
msgstr "tijdens het printen"

#: src/slic3r/GUI/PresetHints.cpp:224
msgid "with a volumetric rate"
msgstr "met een volumetrische ratio"

#: src/slic3r/GUI/PresetHints.cpp:228
#, c-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr "%3.2f mm³/s met een filamentsnelheid van %3.2f mm/s."

#: src/slic3r/GUI/PresetHints.cpp:246
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""
"Aanbevolen minimale wanddikte. Niet beschikbaar in verband met ongeldige "
"laagdikte."

#: src/slic3r/GUI/PresetHints.cpp:262
#, c-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr "Aanbevolen objecten met dunne wanden voor laagdikte %.2fmm en"

#: src/slic3r/GUI/PresetHints.cpp:269
#, c-format
msgid "%d lines: %.2f mm"
msgstr "%d lijnen: %.2fmm"

#: src/slic3r/GUI/PresetHints.cpp:273
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""
"Aanbevolen dunne wanden: not beschikbaar door extreem smalle extrusiebreedte."

#: src/slic3r/GUI/PresetHints.cpp:302
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""
"Top/bodem-shelldikte hint: niet beschikbaar door een ongeldige laagdikte."

#: src/slic3r/GUI/PresetHints.cpp:315
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr "Bovenzijde is %1% mm dik bij een laagdikte van %2% mm."

#: src/slic3r/GUI/PresetHints.cpp:318
msgid "Minimum top shell thickness is %1% mm."
msgstr "Minimale dikte van de bovenzijde is %1% mm."

#: src/slic3r/GUI/PresetHints.cpp:321
msgid "Top is open."
msgstr "Bovenzijde is open."

#: src/slic3r/GUI/PresetHints.cpp:334
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr "Onderzijde is %1% mm dik bij een laagdikte van %2% mm."

#: src/slic3r/GUI/PresetHints.cpp:337
msgid "Minimum bottom shell thickness is %1% mm."
msgstr "Minimale dikte van onderzijde is %1% mm."

#: src/slic3r/GUI/PresetHints.cpp:340
msgid "Bottom is open."
msgstr "Onderzijde is open."

#: src/slic3r/GUI/PrintHostDialogs.cpp:34
msgid "Send G-Code to printer host"
msgstr "Stuur G-code naar printerhost"

#: src/slic3r/GUI/PrintHostDialogs.cpp:34
msgid "Upload to Printer Host with the following filename:"
msgstr "Upload naar printerhost met de volgende bestandsnaam:"

#: src/slic3r/GUI/PrintHostDialogs.cpp:36
msgid "Start printing after upload"
msgstr "Print starten na het uploaden"

#: src/slic3r/GUI/PrintHostDialogs.cpp:44
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""
"Gebruik schuine streepjes ( / ) als mapscheidingstekens als dat nodig is."

#: src/slic3r/GUI/PrintHostDialogs.cpp:57
msgid "Group"
msgstr "Groep"

#: src/slic3r/GUI/PrintHostDialogs.cpp:174
msgid "ID"
msgstr "ID"

#: src/slic3r/GUI/PrintHostDialogs.cpp:175
msgid "Progress"
msgstr "Voortgang"

#: src/slic3r/GUI/PrintHostDialogs.cpp:176
msgid "Status"
msgstr "Status"

#: src/slic3r/GUI/PrintHostDialogs.cpp:177
msgid "Host"
msgstr "Host"

#: src/slic3r/GUI/PrintHostDialogs.cpp:178
msgid "Filename"
msgstr "Bestandsnaam"

#: src/slic3r/GUI/PrintHostDialogs.cpp:179
msgid "Error Message"
msgstr "Foutbericht"

#: src/slic3r/GUI/PrintHostDialogs.cpp:182
msgid "Cancel selected"
msgstr "Annuleren geselecteerd"

#: src/slic3r/GUI/PrintHostDialogs.cpp:184
msgid "Show error message"
msgstr "Toon foutbericht"

#: src/slic3r/GUI/PrintHostDialogs.cpp:226
#: src/slic3r/GUI/PrintHostDialogs.cpp:257
msgid "Enqueued"
msgstr "In de wachtrij geplaatst"

#: src/slic3r/GUI/PrintHostDialogs.cpp:258
msgid "Uploading"
msgstr "Uploaden"

#: src/slic3r/GUI/PrintHostDialogs.cpp:262
msgid "Completed"
msgstr "Voltooid"

#: src/slic3r/GUI/PrintHostDialogs.cpp:300
msgid "Error uploading to print host:"
msgstr "Fout bij het uploaden naar de printhost:"

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr "Fout: geen ramming"

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
#: src/libslic3r/PrintConfig.cpp:687 src/libslic3r/PrintConfig.cpp:731
#: src/libslic3r/PrintConfig.cpp:746 src/libslic3r/PrintConfig.cpp:2542
#: src/libslic3r/PrintConfig.cpp:2551 src/libslic3r/PrintConfig.cpp:2661
#: src/libslic3r/PrintConfig.cpp:2669 src/libslic3r/PrintConfig.cpp:2677
#: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2692
#: src/libslic3r/PrintConfig.cpp:2700
msgid "s"
msgstr "s"

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr "Volumetrische snelheid"

#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:644
#: src/libslic3r/PrintConfig.cpp:1367
msgid "mm³/s"
msgstr "mm³/s"

#: src/slic3r/GUI/SavePresetDialog.cpp:57
#, c-format
msgid "Save %s as:"
msgstr "%s opslaan als:"

#: src/slic3r/GUI/SavePresetDialog.cpp:110
msgid "the following suffix is not allowed:"
msgstr "het volgende achtervoegsel is niet toegestaan:"

#: src/slic3r/GUI/SavePresetDialog.cpp:116
msgid "The supplied name is not available."
msgstr "De ingevoerde naam is niet beschikbaar."

#: src/slic3r/GUI/SavePresetDialog.cpp:122
msgid "Cannot overwrite a system profile."
msgstr "Een systeemprofiel kan niet overschreven worden."

#: src/slic3r/GUI/SavePresetDialog.cpp:127
msgid "Cannot overwrite an external profile."
msgstr "Een extern profiel kan niet overschreven worden."

#: src/slic3r/GUI/SavePresetDialog.cpp:134
msgid "Preset with name \"%1%\" already exists."
msgstr "Preset met de naam '%1%' bestaat al."

#: src/slic3r/GUI/SavePresetDialog.cpp:136
msgid ""
"Preset with name \"%1%\" already exists and is imcopatible with selected "
"printer."
msgstr ""
"Preset met naam \"%1%\" bestaat al en is niet geschikt voor geselecteerde "
"printer."

#: src/slic3r/GUI/SavePresetDialog.cpp:137
msgid "Note: This preset will be replaced after saving"
msgstr "Let op: deze preset wordt vervangen na het opslaan"

#: src/slic3r/GUI/SavePresetDialog.cpp:142
msgid "The name cannot be empty."
msgstr "De naam is ongeldig."

#: src/slic3r/GUI/SavePresetDialog.cpp:176
#: src/slic3r/GUI/SavePresetDialog.cpp:182
msgid "Save preset"
msgstr "Preset opslaan"

#: src/slic3r/GUI/SavePresetDialog.cpp:205
msgctxt "PresetName"
msgid "Copy"
msgstr "Kopieer"

#: src/slic3r/GUI/SavePresetDialog.cpp:263
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""
"Je heb de fysieke printer \"%1%\" geselecteerd\n"
"met gerelateerde printerpreset \"%2%\""

#: src/slic3r/GUI/SavePresetDialog.cpp:296
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr "Wat wil je doen met de preset \"%1%\" na het opslaan?"

#: src/slic3r/GUI/SavePresetDialog.cpp:299
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr "Verander \"%1%\" naar \"%2%\" voor deze fysieke printer \"%3%\""

#: src/slic3r/GUI/SavePresetDialog.cpp:300
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr "Voeg \"%1%\" als volgende preset toe aan de fysieke printer \"%2%\""

#: src/slic3r/GUI/SavePresetDialog.cpp:301
msgid "Just switch to \"%1%\" preset"
msgstr "Schakel naar de \"%1%\"-preset"

#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2389
msgid "Stealth"
msgstr "Stille modus"

#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2383
msgid "Normal"
msgstr "Normaal"

#: src/slic3r/GUI/Selection.cpp:191
msgid "Selection-Add"
msgstr "Selectie - Voeg toe"

#: src/slic3r/GUI/Selection.cpp:232
msgid "Selection-Remove"
msgstr "Selectie - Verwijder"

#: src/slic3r/GUI/Selection.cpp:264
msgid "Selection-Add Object"
msgstr "Selectie - Voeg object toe"

#: src/slic3r/GUI/Selection.cpp:283
msgid "Selection-Remove Object"
msgstr "Selectie - Verwijder object"

#: src/slic3r/GUI/Selection.cpp:301
msgid "Selection-Add Instance"
msgstr "Selectie - Voeg instantie toe"

#: src/slic3r/GUI/Selection.cpp:320
msgid "Selection-Remove Instance"
msgstr "Selectie - Verwijder instantie"

#: src/slic3r/GUI/Selection.cpp:421
msgid "Selection-Add All"
msgstr "Selectie - Voeg alle toe"

#: src/slic3r/GUI/Selection.cpp:447
msgid "Selection-Remove All"
msgstr "Selectie - Verwijder alle"

#: src/slic3r/GUI/Selection.cpp:1006
msgid "Scale To Fit"
msgstr "Verschaal tot het past"

#: src/slic3r/GUI/Selection.cpp:1533
msgid "Set Printable Instance"
msgstr "Stel printbare instanties in"

#: src/slic3r/GUI/Selection.cpp:1533
msgid "Set Unprintable Instance"
msgstr "Stel instantie in op niet-printbaar"

#: src/slic3r/GUI/SysInfoDialog.cpp:90 src/slic3r/GUI/SysInfoDialog.cpp:92
msgid "System Information"
msgstr "Systeeminformatie"

#: src/slic3r/GUI/SysInfoDialog.cpp:177
msgid "Copy to Clipboard"
msgstr "Kopieer van klembord"

#: src/slic3r/GUI/Tab.cpp:111 src/libslic3r/PrintConfig.cpp:306
msgid "Compatible printers"
msgstr "Geschikte printers"

#: src/slic3r/GUI/Tab.cpp:112
msgid "Select the printers this profile is compatible with."
msgstr "Selecteer de printers die geschikt voor dit profiel zijn."

#: src/slic3r/GUI/Tab.cpp:117 src/libslic3r/PrintConfig.cpp:321
msgid "Compatible print profiles"
msgstr "Geschikte printprofielen"

#: src/slic3r/GUI/Tab.cpp:118
msgid "Select the print profiles this profile is compatible with."
msgstr "Selecteer de printprofielen die geschikt voor dit profiel zijn."

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:213
#, c-format
msgid "Save current %s"
msgstr "Huidige %s opslaan"

#: src/slic3r/GUI/Tab.cpp:214
msgid "Delete this preset"
msgstr "Verwijder preset"

#: src/slic3r/GUI/Tab.cpp:218
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"Beweeg de cursor over de knoppen voor meer informatie\n"
"of klik op deze knop."

#: src/slic3r/GUI/Tab.cpp:222
msgid "Search in settings [%1%]"
msgstr "Zoek in instellingen [%1%]"

#: src/slic3r/GUI/Tab.cpp:1228
msgid "Detach from system preset"
msgstr "Ontkoppel van systeempreset"

#: src/slic3r/GUI/Tab.cpp:1241
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""
"Een kopie van de huidige systeempreset wordt aangemaakt. Deze wordt "
"ontkoppeld van het origineel."

#: src/slic3r/GUI/Tab.cpp:1242
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr "De huidige custom preset wordt ontkoppeld van de originele preset."

#: src/slic3r/GUI/Tab.cpp:1245
msgid "Modifications to the current profile will be saved."
msgstr "Aanpassingen aan het huidige profiel worden opgeslagen."

#: src/slic3r/GUI/Tab.cpp:1248
msgid ""
"This action is not revertable.\n"
"Do you want to proceed?"
msgstr ""
"Deze actie kan niet ongedaan gemaakt worden.\n"
"Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/Tab.cpp:1250
msgid "Detach preset"
msgstr "Ontkoppel preset"

#: src/slic3r/GUI/Tab.cpp:1276
msgid "This is a default preset."
msgstr "Dit is een standaard preset."

#: src/slic3r/GUI/Tab.cpp:1278
msgid "This is a system preset."
msgstr "Dit is een systeempreset."

#: src/slic3r/GUI/Tab.cpp:1280
msgid "Current preset is inherited from the default preset."
msgstr "Huidige preset is gebaseerd op de standaard preset."

#: src/slic3r/GUI/Tab.cpp:1282
msgid "Current preset is inherited from"
msgstr "Huidige preset is afgeleid van"

#: src/slic3r/GUI/Tab.cpp:1286
msgid "It can't be deleted or modified."
msgstr "Kan niet verwijderd of aangepast worden."

#: src/slic3r/GUI/Tab.cpp:1287
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""
"Eventuele wijzigingen moet worden opgeslagen als een nieuwe preset die is "
"gebaseerd op de huidige."

#: src/slic3r/GUI/Tab.cpp:1288
msgid "To do that please specify a new name for the preset."
msgstr "Geef daarvoor een nieuwe naam aan de preset."

#: src/slic3r/GUI/Tab.cpp:1292
msgid "Additional information:"
msgstr "Additionele informatie:"

#: src/slic3r/GUI/Tab.cpp:1298
msgid "printer model"
msgstr "printermodel"

#: src/slic3r/GUI/Tab.cpp:1306
msgid "default print profile"
msgstr "standaard printprofiel"

#: src/slic3r/GUI/Tab.cpp:1309
msgid "default filament profile"
msgstr "standaard filamentprofiel"

#: src/slic3r/GUI/Tab.cpp:1323
msgid "default SLA material profile"
msgstr "standaard SLA-materiaalprofiel"

#: src/slic3r/GUI/Tab.cpp:1327
msgid "default SLA print profile"
msgstr "standaard SLA-printprofiel"

#: src/slic3r/GUI/Tab.cpp:1335
msgid "full profile name"
msgstr "volledige profielnaam"

#: src/slic3r/GUI/Tab.cpp:1336
msgid "symbolic profile name"
msgstr "symbolische profielnaam"

#: src/slic3r/GUI/Tab.cpp:1374 src/slic3r/GUI/Tab.cpp:4005
msgid "Layers and perimeters"
msgstr "Lagen en perimeters"

#: src/slic3r/GUI/Tab.cpp:1380
msgid "Vertical shells"
msgstr "Verticale shells"

#: src/slic3r/GUI/Tab.cpp:1392
msgid "Horizontal shells"
msgstr "Horizontale shells"

#: src/slic3r/GUI/Tab.cpp:1393 src/libslic3r/PrintConfig.cpp:1886
msgid "Solid layers"
msgstr "Dichte lagen"

#: src/slic3r/GUI/Tab.cpp:1398
msgid "Minimum shell thickness"
msgstr "Minimale shelldikte"

#: src/slic3r/GUI/Tab.cpp:1409
msgid "Quality (slower slicing)"
msgstr "Kwaliteit (slicen kan langer duren)"

#: src/slic3r/GUI/Tab.cpp:1434
msgid "Reducing printing time"
msgstr "Printtijd verkorten"

#: src/slic3r/GUI/Tab.cpp:1446
msgid "Skirt and brim"
msgstr "Skirt en brim"

#: src/slic3r/GUI/Tab.cpp:1466
msgid "Raft"
msgstr "Raft"

#: src/slic3r/GUI/Tab.cpp:1470
msgid "Options for support material and raft"
msgstr "Opties voor support en raft"

#: src/slic3r/GUI/Tab.cpp:1485
msgid "Speed for print moves"
msgstr "Snelheid voor printbewegingen"

#: src/slic3r/GUI/Tab.cpp:1498
msgid "Speed for non-print moves"
msgstr "Snelheid voor niet-print bewegingen"

#: src/slic3r/GUI/Tab.cpp:1501
msgid "Modifiers"
msgstr "Modificators"

#: src/slic3r/GUI/Tab.cpp:1504
msgid "Acceleration control (advanced)"
msgstr "Acceleraties (geavanceerd)"

#: src/slic3r/GUI/Tab.cpp:1511
msgid "Autospeed (advanced)"
msgstr "Automatische snelheid (geavanceerd)"

#: src/slic3r/GUI/Tab.cpp:1519
msgid "Multiple Extruders"
msgstr "Meerdere extruders"

#: src/slic3r/GUI/Tab.cpp:1527
msgid "Ooze prevention"
msgstr "Druippreventie"

#: src/slic3r/GUI/Tab.cpp:1545
msgid "Extrusion width"
msgstr "Extrusiebreedte"

#: src/slic3r/GUI/Tab.cpp:1555
msgid "Overlap"
msgstr "Overlapping"

#: src/slic3r/GUI/Tab.cpp:1558
msgid "Flow"
msgstr "Stroom"

#: src/slic3r/GUI/Tab.cpp:1567
msgid "Other"
msgstr "Overige"

#: src/slic3r/GUI/Tab.cpp:1570 src/slic3r/GUI/Tab.cpp:4081
msgid "Output options"
msgstr "Output-opties"

#: src/slic3r/GUI/Tab.cpp:1571
msgid "Sequential printing"
msgstr "Achtereenvolgens printen"

#: src/slic3r/GUI/Tab.cpp:1573
msgid "Extruder clearance (mm)"
msgstr "Extruderruimte (mm)"

#: src/slic3r/GUI/Tab.cpp:1578 src/slic3r/GUI/Tab.cpp:4082
msgid "Output file"
msgstr "Outputbestand"

#: src/slic3r/GUI/Tab.cpp:1585 src/libslic3r/PrintConfig.cpp:1572
msgid "Post-processing scripts"
msgstr "Scripts voor nabewerking"

#: src/slic3r/GUI/Tab.cpp:1591 src/slic3r/GUI/Tab.cpp:1592
#: src/slic3r/GUI/Tab.cpp:1900 src/slic3r/GUI/Tab.cpp:1901
#: src/slic3r/GUI/Tab.cpp:2234 src/slic3r/GUI/Tab.cpp:2235
#: src/slic3r/GUI/Tab.cpp:2310 src/slic3r/GUI/Tab.cpp:2311
#: src/slic3r/GUI/Tab.cpp:3948 src/slic3r/GUI/Tab.cpp:3949
msgid "Notes"
msgstr "Opmerkingen"

#: src/slic3r/GUI/Tab.cpp:1598 src/slic3r/GUI/Tab.cpp:1908
#: src/slic3r/GUI/Tab.cpp:2241 src/slic3r/GUI/Tab.cpp:2317
#: src/slic3r/GUI/Tab.cpp:3956 src/slic3r/GUI/Tab.cpp:4087
msgid "Dependencies"
msgstr "Afhankelijkheden"

#: src/slic3r/GUI/Tab.cpp:1599 src/slic3r/GUI/Tab.cpp:1909
#: src/slic3r/GUI/Tab.cpp:2242 src/slic3r/GUI/Tab.cpp:2318
#: src/slic3r/GUI/Tab.cpp:3957 src/slic3r/GUI/Tab.cpp:4088
msgid "Profile dependencies"
msgstr "Profielafhankelijkheden"

#: src/slic3r/GUI/Tab.cpp:1679
msgid "Filament Overrides"
msgstr "Overschrijven door filament"

#: src/slic3r/GUI/Tab.cpp:1789
msgid "Temperature"
msgstr "Temperatuur"

#: src/slic3r/GUI/Tab.cpp:1790
msgid "Nozzle"
msgstr "Nozzle"

#: src/slic3r/GUI/Tab.cpp:1795
msgid "Bed"
msgstr "Bed"

#: src/slic3r/GUI/Tab.cpp:1800
msgid "Cooling"
msgstr "Koeling"

#: src/slic3r/GUI/Tab.cpp:1802 src/libslic3r/PrintConfig.cpp:1474
#: src/libslic3r/PrintConfig.cpp:2334
msgid "Enable"
msgstr "Toestaan"

#: src/slic3r/GUI/Tab.cpp:1813
msgid "Fan settings"
msgstr "Ventilatorinstellingen"

#: src/slic3r/GUI/Tab.cpp:1823
msgid "Cooling thresholds"
msgstr "Koeldrempels"

#: src/slic3r/GUI/Tab.cpp:1829
msgid "Filament properties"
msgstr "Filamenteigenschappen"

#: src/slic3r/GUI/Tab.cpp:1836
msgid "Print speed override"
msgstr "Printsnelheid overschrijven"

#: src/slic3r/GUI/Tab.cpp:1846
msgid "Wipe tower parameters"
msgstr "Afveegblokparameters"

#: src/slic3r/GUI/Tab.cpp:1849
msgid "Toolchange parameters with single extruder MM printers"
msgstr "Toolwisselparameter voor multi-materialprinters met één extruder"

#: src/slic3r/GUI/Tab.cpp:1862
msgid "Ramming settings"
msgstr "Ramming-instellingen"

#: src/slic3r/GUI/Tab.cpp:1885 src/slic3r/GUI/Tab.cpp:2173
#: src/libslic3r/PrintConfig.cpp:1969
msgid "Custom G-code"
msgstr "Custom G-code"

#: src/slic3r/GUI/Tab.cpp:1886 src/slic3r/GUI/Tab.cpp:2174
#: src/libslic3r/PrintConfig.cpp:1919 src/libslic3r/PrintConfig.cpp:1934
msgid "Start G-code"
msgstr "Start G-code"

#: src/slic3r/GUI/Tab.cpp:1893 src/slic3r/GUI/Tab.cpp:2181
#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:436
msgid "End G-code"
msgstr "Eind-G-code"

#: src/slic3r/GUI/Tab.cpp:1943
msgid "Volumetric flow hints not available"
msgstr "Volumetrische stroom - opmerkingen niet beschikbaar"

#: src/slic3r/GUI/Tab.cpp:2039
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""
"Let op dat alle parameters van deze groep zijn verplaatst naar de fysieke "
"printerinstellingen (zie wijzigingslogboek).\n"
"\n"
"Een nieuw fysieke printerprofiel wordt aangemaakt door te klikken op het "
"tandwiel-icoon, rechts van het printerprofiel-selectievak, en \"Fysieke "
"printer toevoegen\" te selecteren. Het fysieke printerprofiel bewerker opent "
"ook als slechts geklikt wordt op het tandwiel-icoon in de "
"printerinstellingentab. Het fysieke printerprofiel is opgeslagen in de "
"locatie PrusaSlicer/physical_printer."

#: src/slic3r/GUI/Tab.cpp:2072 src/slic3r/GUI/Tab.cpp:2254
msgid "Size and coordinates"
msgstr "Grootte en coördinaten"

#: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
msgid "Capabilities"
msgstr "Mogelijkheden"

#: src/slic3r/GUI/Tab.cpp:2086
msgid "Number of extruders of the printer."
msgstr "Aantal extruders van de printer."

#: src/slic3r/GUI/Tab.cpp:2114
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""
"Multi-material met één extruder is geselecteerd.\n"
"Alle extruders moeten daarvoor dezelfde diameter hebben.\n"
"Wilt u de diameters voor alle extruders aanpassen gelijk aan die van de "
"eerste extruder?"

#: src/slic3r/GUI/Tab.cpp:2117 src/slic3r/GUI/Tab.cpp:2520
#: src/libslic3r/PrintConfig.cpp:1443
msgid "Nozzle diameter"
msgstr "Nozzlediameter"

#: src/slic3r/GUI/Tab.cpp:2188 src/libslic3r/PrintConfig.cpp:194
msgid "Before layer change G-code"
msgstr "G-code die komt vóór de laagwisseling"

#: src/slic3r/GUI/Tab.cpp:2195 src/libslic3r/PrintConfig.cpp:1182
msgid "After layer change G-code"
msgstr "G-code die komt na de laagwisseling"

#: src/slic3r/GUI/Tab.cpp:2202 src/libslic3r/PrintConfig.cpp:2227
msgid "Tool change G-code"
msgstr "Toolwisseling G-code"

#: src/slic3r/GUI/Tab.cpp:2209
msgid "Between objects G-code (for sequential printing)"
msgstr "G-code die komt tussen objecten (bij achtereenvolgens printen)"

#: src/slic3r/GUI/Tab.cpp:2216
msgid "Color Change G-code"
msgstr "Kleurwissel G-code"

#: src/slic3r/GUI/Tab.cpp:2222 src/libslic3r/PrintConfig.cpp:1960
msgid "Pause Print G-code"
msgstr "Pauzeer print G-code"

#: src/slic3r/GUI/Tab.cpp:2228
msgid "Template Custom G-code"
msgstr "Template custom G-code"

#: src/slic3r/GUI/Tab.cpp:2261
msgid "Display"
msgstr "Scherm"

#: src/slic3r/GUI/Tab.cpp:2276
msgid "Tilt"
msgstr "Draaiing"

#: src/slic3r/GUI/Tab.cpp:2277
msgid "Tilt time"
msgstr "Draaitijd"

#: src/slic3r/GUI/Tab.cpp:2283 src/slic3r/GUI/Tab.cpp:3932
msgid "Corrections"
msgstr "Correcties"

#: src/slic3r/GUI/Tab.cpp:2300 src/slic3r/GUI/Tab.cpp:3928
msgid "Exposure"
msgstr "Belichtingstijd"

#: src/slic3r/GUI/Tab.cpp:2359 src/slic3r/GUI/Tab.cpp:2453
#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1246
#: src/libslic3r/PrintConfig.cpp:1263 src/libslic3r/PrintConfig.cpp:1280
#: src/libslic3r/PrintConfig.cpp:1296 src/libslic3r/PrintConfig.cpp:1306
#: src/libslic3r/PrintConfig.cpp:1316 src/libslic3r/PrintConfig.cpp:1326
msgid "Machine limits"
msgstr "Machinelimieten"

#: src/slic3r/GUI/Tab.cpp:2382
msgid "Values in this column are for Normal mode"
msgstr "Waarden in deze kolom zijn voor de normale modus"

#: src/slic3r/GUI/Tab.cpp:2388
msgid "Values in this column are for Stealth mode"
msgstr "Waarden in deze kolom zijn voor de stille modus"

#: src/slic3r/GUI/Tab.cpp:2397
msgid "Maximum feedrates"
msgstr "Maximale voedingssnelheden"

#: src/slic3r/GUI/Tab.cpp:2402
msgid "Maximum accelerations"
msgstr "Maximale acceleraties"

#: src/slic3r/GUI/Tab.cpp:2409
msgid "Jerk limits"
msgstr "Ruklimieten"

#: src/slic3r/GUI/Tab.cpp:2414
msgid "Minimum feedrates"
msgstr "Minimale voedingssnelheden"

#: src/slic3r/GUI/Tab.cpp:2478 src/slic3r/GUI/Tab.cpp:2486
msgid "Single extruder MM setup"
msgstr "Multi-materialsetup met één extruder"

#: src/slic3r/GUI/Tab.cpp:2487
msgid "Single extruder multimaterial parameters"
msgstr "Parameter voor multi-material met één extruder"

#: src/slic3r/GUI/Tab.cpp:2518
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""
"Dit is een multi-materialprinter met één extruder. De diameters van alle "
"extruders worden ingesteld op de nieuwe waarde. Weet u zeker dat u wilt "
"doorgaan?"

#: src/slic3r/GUI/Tab.cpp:2542
msgid "Layer height limits"
msgstr "Laagdiktelimieten"

#: src/slic3r/GUI/Tab.cpp:2547
msgid "Position (for multi-extruder printers)"
msgstr "Positie (voor multi-extruderprinters)"

#: src/slic3r/GUI/Tab.cpp:2553
msgid "Only lift Z"
msgstr "Beweeg alleen Z omhoog"

#: src/slic3r/GUI/Tab.cpp:2566
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""
"Retractie als de tool uit staat (geavanceerde instelling voor multi-"
"extrudersetups)"

#: src/slic3r/GUI/Tab.cpp:2573
msgid "Reset to Filament Color"
msgstr "Reset naar filamentkleur"

#: src/slic3r/GUI/Tab.cpp:2751
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"De afveegoptie is niet beschikbaar als firmwareretractie aanstaat.\n"
"\n"
"Moet deze uitgezet worden om firmwareretractie te gebruiken?"

#: src/slic3r/GUI/Tab.cpp:2753
msgid "Firmware Retraction"
msgstr "Firmwareretractie"

#: src/slic3r/GUI/Tab.cpp:3339
msgid "Detached"
msgstr "Ontkoppeld"

#: src/slic3r/GUI/Tab.cpp:3402
msgid "remove"
msgstr "verwijder"

#: src/slic3r/GUI/Tab.cpp:3402
msgid "delete"
msgstr "verwijderen"

#: src/slic3r/GUI/Tab.cpp:3411
msgid "It's a last preset for this physical printer."
msgstr "Het is een laatste preset voor deze fysieke printer."

#: src/slic3r/GUI/Tab.cpp:3416
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""
"Weet je zeker dat je \"%1%\" wilt verwijderen van de fysieke printer \"%1%\"?"

#: src/slic3r/GUI/Tab.cpp:3428
msgid ""
"The physical printer(s) below is based on the preset, you are going to "
"delete."
msgstr ""
"De onderstaande fysieke printer(s) zijn gebaseerd op de preset die je gaat "
"verwijderen."

#: src/slic3r/GUI/Tab.cpp:3432
msgid ""
"Note, that selected preset will be deleted from this/those printer(s) too."
msgstr ""
"Let op dat de geselecteerde preset automatisch wordt verwijderd van deze "
"printer(s)."

#: src/slic3r/GUI/Tab.cpp:3436
msgid ""
"The physical printer(s) below is based only on the preset, you are going to "
"delete."
msgstr ""
"De onderstaande fysieke printer(s) zijn alleen gebaseerd op de preset, die "
"je gaat verwijderen."

#: src/slic3r/GUI/Tab.cpp:3440
msgid ""
"Note, that this/those printer(s) will be deleted after deleting of the "
"selected preset."
msgstr ""
"Let op dat deze printer(s) wordt verwijderd na verwijderen van geselecteerde "
"preset."

#: src/slic3r/GUI/Tab.cpp:3444
msgid "Are you sure you want to %1% the selected preset?"
msgstr "Weet u zeker dat u de geselecteerde preset %1% wilt?"

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3449
msgid "%1% Preset"
msgstr "Preset %1%"

#: src/slic3r/GUI/Tab.cpp:3530 src/slic3r/GUI/Tab.cpp:3602
msgid "Set"
msgstr "Stel in"

#: src/slic3r/GUI/Tab.cpp:3666
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""
"Machinelimieten worden opgenomen in de G-code en gebruikt voor de geschatte "
"printtijd."

#: src/slic3r/GUI/Tab.cpp:3669
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""
"Machinelimieten worden NIET opgenomen in de G-code, hoewel ze worden "
"gebruikt om de printtijd te schatten, waardoor ze niet nauwkeurig kunnen "
"zijn bij een printer met andere machinelimieten."

#: src/slic3r/GUI/Tab.cpp:3673
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""
"Machinelimieten zijn niet ingesteld, waardoor de geschatte printtijd niet "
"nauwkeurig is."

#: src/slic3r/GUI/Tab.cpp:3695
msgid "LOCKED LOCK"
msgstr "Vergrendeld"

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3697
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""
"geeft aan dat de instellingen gelijk zijn aan de systeemwaarden voor de "
"huidige optiegroep"

#: src/slic3r/GUI/Tab.cpp:3699
msgid "UNLOCKED LOCK"
msgstr "Ontgrendeld"

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3701
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""
"geeft aan dat sommige instellingen zijn veranderd en niet gelijk zijn aan de "
"standaardwaarde voor de huidige optiegroep.\n"
"Klik op het ontgrendeld-pictogram om de instelling te resetten naar de "
"systeemwaarden voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:3706
msgid "WHITE BULLET"
msgstr "Wit bolletje"

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3708
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""
"de linkerknop geeft aan dat het niet een systeempreset is,\n"
"de rechterknop geeft aan of de instelling is gewijzigd."

#: src/slic3r/GUI/Tab.cpp:3711
msgid "BACK ARROW"
msgstr "Pijltje terug"

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3713
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"geeft aan dat de instellingen zijn veranderd en niet gelijk zijn aan de "
"laatst opgeslagen preset voor de huidige optiegroep.\n"
"Klik op het pijltje-terug-pictogram om alle instellingen te resetten naar de "
"laatst opgeslagen preset voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:3723
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""
"Vergrendeld-pictogram geeft aan dat de instellingen gelijk zijn aan de "
"systeemwaarde van de huidige optiegroep"

#: src/slic3r/GUI/Tab.cpp:3725
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""
"Ontgrendeld-pictogram geeft aan dat sommige instellingen zijn veranderd en "
"niet gelijk zijn aan de systeemwaarde voor de huidige optiegroep.\n"
"Klik om alle instellingen voor de huidige optiegroep te resetten naar "
"systeemwaarden."

#: src/slic3r/GUI/Tab.cpp:3728
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr "Het witte bolletje geeft aan dat het geen systeempreset betreft."

#: src/slic3r/GUI/Tab.cpp:3731
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""
"Het witte bolletje geeft aan dat de instelling gelijk is aan de laatst "
"opgeslagen preset voor de huidige optiegroep."

#: src/slic3r/GUI/Tab.cpp:3733
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"Het pijltje-terug-pictogram geeft aan dat de instellingen zijn gewijzigd en "
"niet gelijk zijn aan de laatst opgeslagen preset voor de huidige "
"optiegroep.\n"
"Klik om alle instellingen terug te zetten voor de huidige optiegroep naar de "
"laatst opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:3739
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""
"Vergrendeld-pictogram geeft aan dat de waarde gelijk is aan de systeemwaarde."

#: src/slic3r/GUI/Tab.cpp:3740
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""
"Ontgrendeld-pictogram geeft aan dat de waarde is veranderd en niet gelijk is "
"aan de systeemwaarde.\n"
"Klik om de huidige waarde te resetten naar de systeemwaarde."

#: src/slic3r/GUI/Tab.cpp:3746
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""
"Het witte bolletje geeft aan dat de waarde gelijk is aan de laatst "
"opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:3747
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"Het pijltje-terug-pictogram geeft aan dat de waarde is veranderd en niet "
"gelijk is aan de laatst opgeslagen preset.\n"
"Klik om de waarde te resetten naar de laatst opgeslagen preset."

#: src/slic3r/GUI/Tab.cpp:3891 src/slic3r/GUI/Tab.cpp:3893
msgid "Material"
msgstr "Materiaal"

#: src/slic3r/GUI/Tab.cpp:4015
msgid "Support head"
msgstr "Supportkop"

#: src/slic3r/GUI/Tab.cpp:4020
msgid "Support pillar"
msgstr "Supportpijler"

#: src/slic3r/GUI/Tab.cpp:4043
msgid "Connection of the support sticks and junctions"
msgstr "Verbindingen van de supporttakken en kruisingen"

#: src/slic3r/GUI/Tab.cpp:4048
msgid "Automatic generation"
msgstr "Automatisch genereren"

#: src/slic3r/GUI/Tab.cpp:4122
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""
"\"%1%\" is uitgeschakeld omdat \"%2%\" aanstaat in \"%3%\"-categorie.\n"
"Om \"%1%\" aan te zetten moet \"%2%\" uit staan"

#: src/slic3r/GUI/Tab.cpp:4124 src/libslic3r/PrintConfig.cpp:2908
msgid "Object elevation"
msgstr "Objectverhoging"

#: src/slic3r/GUI/Tab.cpp:4124 src/libslic3r/PrintConfig.cpp:3010
msgid "Pad around object"
msgstr "Basisplaat rondom object"

#: src/slic3r/GUI/Tab.hpp:373 src/slic3r/GUI/Tab.hpp:495
msgid "Print Settings"
msgstr "Printinstellingen"

#: src/slic3r/GUI/Tab.hpp:404
msgid "Filament Settings"
msgstr "Filamentinstellingen"

#: src/slic3r/GUI/Tab.hpp:445
msgid "Printer Settings"
msgstr "Printerinstellingen"

#: src/slic3r/GUI/Tab.hpp:479
msgid "Material Settings"
msgstr "Materiaalinstellingen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:137
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:146
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:845
msgid "Undef"
msgstr "Ongedefinieerd"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:525
msgid "PrusaSlicer is closing: Unsaved Changes"
msgstr "PrusaSlicer sluit af: niet-opgeslagen wijzigingen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:542
msgid "Switching Presets: Unsaved Changes"
msgstr "Wisselen van presets: niet-opgeslagen wijzigingen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:608
msgid "Old Value"
msgstr "Oude waarde"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:609
msgid "New Value"
msgstr "Nieuwe waarde"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:640
msgid "Transfer"
msgstr "Omzetten"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:641
msgid "Discard"
msgstr "Afwijzen"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:642
msgid "Save"
msgstr "Opslaan"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:662
msgid "PrusaSlicer will remember your action."
msgstr "PrusaSlicer onthoudt je keuze."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:664
msgid ""
"You will not be asked about the unsaved changes the next time you close "
"PrusaSlicer."
msgstr ""
"Je wordt niet gevraagd over niet-opgeslagen wijzigingen de volgende keer als "
"PrusaSlicer afsluit."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:665
msgid ""
"You will not be asked about the unsaved changes the next time you switch a "
"preset."
msgstr ""
"Je wordt niet gevraagd over niet-opgeslagen wijzigingen de volgende keer als "
"je wisselt van preset."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:666
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""
"Kijk naar \"Voorkeuren\" en check \"%1%\"\n"
"om weer te vragen over niet-opgeslagen wijzigingen."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:668
msgid "PrusaSlicer: Don't ask me again"
msgstr "PrusaSlicer: vraag het niet nogmaals"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:735
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""
"Sommige velden zijn te lang om te passen. Rechtermuisklik toont de volledige "
"tekst."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:737
msgid "All settings changes will be discarded."
msgstr "Alle gewijzigde instellingen worden afgewezen."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
msgid "Save the selected options."
msgstr "Geselecteerde opties opslaan."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
msgid "Transfer the selected settings to the newly selected preset."
msgstr "Ze de geselecteerde instelling om in de nieuw geselecteerde preset."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:744
msgid "Save the selected options to preset \"%1%\"."
msgstr "Geselecteerde opties voor preset \"%1%\" opslaan."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:745
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""
"Zet de geselecteerde optie om in de nieuw geselecteerde preset \"%1%\"."

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1004
msgid "The following presets were modified:"
msgstr "De volgende presets zijn aangepast:"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1009
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr "Preset \"%1%\" heeft de volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1013
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""
"Preset \"%1%\" is niet geschikt voor het nieuwe printerprofiel en heeft de "
"volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1014
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""
"Preset \"%1%\" is niet geschikt voor het nieuwe printprofiel en heeft de "
"volgende niet-opgeslagen wijzigingen:"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1061
msgid "Extruders count"
msgstr "Aantal extruders"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1177
msgid "Old value"
msgstr "Oude waarde"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1178
msgid "New value"
msgstr "Nieuwe waarde"

#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr "Update beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:38
#, c-format
msgid "New version of %s is available"
msgstr "Nieuwe versie van %s beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr "Huidige versie:"

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr "Nieuwe versie:"

#: src/slic3r/GUI/UpdateDialogs.cpp:53
msgid "Changelog && Download"
msgstr "Wijzigingslogboek && Download"

#: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125
#: src/slic3r/GUI/UpdateDialogs.cpp:183
msgid "Open changelog page"
msgstr "Open wijzigingslogboekpagina"

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr "Open downloadpagina"

#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr "Geef geen meldingen over nieuwe versies meer"

#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
msgid "Configuration update"
msgstr "Configuratie-update"

#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Configuration update is available"
msgstr "Er is een configuratie-update beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"Wilt u het installeren?\n"
"\n"
"Er wordt eerst een configuratiesnapshot gemaakt. Deze kan op elk moment "
"hersteld worden en zal geen probleem geven bij nieuwere versies.\n"
"\n"
"Geüpdatete configuratiebundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173
msgid "Comment:"
msgstr "Opmerking:"

#: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210
#, c-format
msgid "%s incompatibility"
msgstr "%s incompatibiliteit"

#: src/slic3r/GUI/UpdateDialogs.cpp:148
msgid "You must install a configuration update."
msgstr "U moet een configuratie-update installeren."

#: src/slic3r/GUI/UpdateDialogs.cpp:151
#, c-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"%s zal nu updates starten, anders is het niet mogelijk dit programma correct "
"te draaien.\n"
"\n"
"Vooraf wordt een volledige configuratiesnapshot gemaakt. Het kan dan altijd "
"hersteld worden, mochten de updates problemen geven met de nieuwe versie.\n"
"\n"
"Geüpdatete configuratiebundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246
#, c-format
msgid "Exit %s"
msgstr "%s afsluiten"

#: src/slic3r/GUI/UpdateDialogs.cpp:211
#, c-format
msgid "%s configuration is incompatible"
msgstr "%s configuratie is niet geschikt"

#: src/slic3r/GUI/UpdateDialogs.cpp:216
#, c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""
"Deze versie van %s is niet geschikt voor de huidig geïnstalleerde "
"configuratiebundels.\n"
"Dit kan mogelijk ontstaan als resultaat van het draaien van een ouder %s na "
"het gebruik van een nieuwere.\n"
"\n"
"U kunt kiezen om %s af te sluiten en opnieuw te proberen met een nieuwere "
"versie of de startconfiguratie opnieuw te draaien. In geval van dat laatste "
"wordt een backup-snapshot gemaakt van de bestaande configuratie voor het "
"installeren van bestanden die geschikt zijn voor deze %s."

#: src/slic3r/GUI/UpdateDialogs.cpp:225
#, c-format
msgid "This %s version: %s"
msgstr "Deze %s versie: %s"

#: src/slic3r/GUI/UpdateDialogs.cpp:230
msgid "Incompatible bundles:"
msgstr "Ongeschikte bundels:"

#: src/slic3r/GUI/UpdateDialogs.cpp:249
msgid "Re-configure"
msgstr "Herconfigureer"

#: src/slic3r/GUI/UpdateDialogs.cpp:270
#, c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"%s gebruikt nu een geüpdatete configuratiestructuur.\n"
"\n"
"Presets van het systeem zijn geïntroduceerd. Deze bevatten ingebouwde "
"standaardinstellingen voor meerdere printers. Deze systemen kunnen niet "
"aangepast worden. In plaats daarvan kunt u nu uw eigen presets creëren op "
"basis van een van de preset.\n"
"Een overgenomen preset kan een bepaalde waarde van bovenliggende "
"instellingen meekrijgen, maar ook overschrijven met een aangepaste waarde.\n"
"\n"
"Ga verdere met de %s die volgt om de nieuwe presets in te stellen en om te "
"kiezen of automatische presets moeten worden ingeschakeld."

#: src/slic3r/GUI/UpdateDialogs.cpp:287
msgid "For more information please visit our wiki page:"
msgstr "Voor meer informatie kunt u naar onze wiki-pagina gaan:"

#: src/slic3r/GUI/UpdateDialogs.cpp:304
msgid "Configuration updates"
msgstr "Configuratie-updates"

#: src/slic3r/GUI/UpdateDialogs.cpp:304
msgid "No updates available"
msgstr "Geen updates beschikbaar"

#: src/slic3r/GUI/UpdateDialogs.cpp:309
#, c-format
msgid "%s has no configuration updates available."
msgstr "%s heeft geen configuratie-updates beschikbaar."

#: src/slic3r/GUI/WipeTowerDialog.cpp:15
msgid "Ramming customization"
msgstr "Ramming aanpassen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:41
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"Ramming wordt gebruikt voor het snel extruderen vlak voor een toolwisseling "
"bij multi-materialprinters met één extruder. Het doel daarvan is om het "
"einde van het ongeladen filament goed te vormen (zodat het later weer "
"geladen kan worden) en nieuw filament niet verhinderd wordt. Deze fase is "
"belangrijk. Verschillende materialen vereisen verschillende "
"extrusiesnelheden voor de juiste vorm. Daarom zijn de waarden tijdens de "
"ramming aan te passen.\n"
"\n"
"Dit is een expert-level instelling. Onjuiste aanpassingen kunnen zorgen voor "
"verstoppingen en andere problemen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:83
msgid "Total ramming time"
msgstr "Totale ramming-tijd"

#: src/slic3r/GUI/WipeTowerDialog.cpp:85
msgid "Total rammed volume"
msgstr "Totaal ramming-volume"

#: src/slic3r/GUI/WipeTowerDialog.cpp:89
msgid "Ramming line width"
msgstr "Lijnbreedte voor ramming"

#: src/slic3r/GUI/WipeTowerDialog.cpp:91
msgid "Ramming line spacing"
msgstr "Lijnafstand voor ramming"

#: src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr "Afveegblok - afveegvolume aanpassen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:254
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""
"Hier kunt u het benodigde afveegvolume (mm³) voor elk soort tool aanpassen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:255
msgid "Extruder changed to"
msgstr "Extruder veranderd naar"

#: src/slic3r/GUI/WipeTowerDialog.cpp:263
msgid "unloaded"
msgstr "ontladen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:264
msgid "loaded"
msgstr "geladen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:276
msgid "Tool #"
msgstr "Tool #"

#: src/slic3r/GUI/WipeTowerDialog.cpp:285
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""
"Totaal afveegvolume dat de som is van de twee onderstaande waarden, "
"afhankelijk van welke tools zijn geladen/ontladen."

#: src/slic3r/GUI/WipeTowerDialog.cpp:286
msgid "Volume to purge (mm³) when the filament is being"
msgstr "Afveegvolume (mm³) als het filament wordt gebruikt"

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "From"
msgstr "Van"

#: src/slic3r/GUI/WipeTowerDialog.cpp:365
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"Overschakelen naar eenvoudige modus zorgt dat de gewijzigde instellingen uit "
"de geavanceerde modus vervallen!\n"
"\n"
"Weet u zeker dat u wilt doorgaan?"

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show simplified settings"
msgstr "Toon eenvoudige instellingen"

#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show advanced settings"
msgstr "Toon geavanceerde instellingen"

#: src/slic3r/GUI/wxExtensions.cpp:623
#, c-format
msgid "Switch to the %s mode"
msgstr "Schakel over naar de %s modus"

#: src/slic3r/GUI/wxExtensions.cpp:624
#, c-format
msgid "Current mode is %s"
msgstr "Huidige modus is: %s"

#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68
#, c-format
msgid "Mismatched type of print host: %s"
msgstr "Onjuist type printhost: %s"

#: src/slic3r/Utils/AstroBox.cpp:84
msgid "Connection to AstroBox works correctly."
msgstr "Verbinding met AstroBox werkt naar behoren."

#: src/slic3r/Utils/AstroBox.cpp:90
msgid "Could not connect to AstroBox"
msgstr "Kan niet verbinden met AstroBox"

#: src/slic3r/Utils/AstroBox.cpp:92
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr "Let op: AstroBox-versie 1.1.0 is tenminste vereist."

#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr "Verbinding met Duet werkt naar behoren."

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr "Kan niet verbinden met Duet"

#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr "Onbekende fout opgetreden"

#: src/slic3r/Utils/Duet.cpp:145
msgid "Wrong password"
msgstr "Verkeerd wachtwoord"

#: src/slic3r/Utils/Duet.cpp:148
msgid "Could not get resources to create a new connection"
msgstr "Kan geen middelen krijgen om nieuwe verbinding te maken"

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr "Exporteer bronmodel"

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr "Laden van het model mislukt."

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr "Repareer model met de NetFabb-service"

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr "Mesh-reparatie mislukt."

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr "Gerepareerd model aan het laden"

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr "Opslaan van mesh in 3MF-container mislukt."

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr "Model repareren"

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model"
msgstr "Model exporteren"

#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr "Exporteren van tijdelijk 3MF-bestand mislukt"

#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr "Importeren van het gerepareerde 3MF-bestand mislukt"

#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr "Gerepareerd 3MF-bestand bevat geen object"

#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr "Gerepareerd 3MF-bestand bevat meer dan één object"

#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr "Gerepareerd 3MF-bestand bevat geen volume"

#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr "Gerepareerd 3MF-bestand bevat meer dan één volume"

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr "Model repareren voltooid"

#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr "Model repareren geannuleerd"

#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr "Model repareren was succesvol"

#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr "Model repareren met de NetFabb-service"

#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model repair failed:"
msgstr "Model repareren mislukt:"

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr "Uploaden naar een FlashAir-kaart niet toegestaan."

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr "Verbinding met FlashAir werkt naar behoren en uploaden is toegestaan."

#: src/slic3r/Utils/FlashAir.cpp:74
msgid "Could not connect to FlashAir"
msgstr "Kan niet verbinden met FlashAir"

#: src/slic3r/Utils/FlashAir.cpp:76
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""
"Let op: FlashAir met firmware 2.00.02 (of nieuwer) en een geactiveerde "
"upload zijn vereist."

#: src/slic3r/Utils/OctoPrint.cpp:83
msgid "Connection to OctoPrint works correctly."
msgstr "Verbinding met OctoPrint werkt naar behoren."

#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Could not connect to OctoPrint"
msgstr "Kan niet verbinden met OctoPrint"

#: src/slic3r/Utils/OctoPrint.cpp:91
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "Let op: de minimaal vereiste versie van OctoPrint is 1.1.0."

#: src/slic3r/Utils/OctoPrint.cpp:185
msgid "Connection to Prusa SL1 works correctly."
msgstr "Verbinding met Prusa SL1 werkt naar behoren."

#: src/slic3r/Utils/OctoPrint.cpp:191
msgid "Could not connect to Prusa SLA"
msgstr "Kan niet verbinden met Prusa SLA"

#: src/slic3r/Utils/PresetUpdater.cpp:727
#, c-format
msgid "requires min. %s and max. %s"
msgstr "vereist minimaal %s en maximaal %s"

#: src/slic3r/Utils/PresetUpdater.cpp:731
#, c-format
msgid "requires min. %s"
msgstr "vereist minimaal %s"

#: src/slic3r/Utils/PresetUpdater.cpp:734
#, c-format
msgid "requires max. %s"
msgstr "vereist maximaal %s"

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""
"Kan geen systeem SSL certicate store detecteren. PrusaSlicer is niet in "
"staat om een veilige netwerkverbinding in te stellen."

#: src/slic3r/Utils/Http.cpp:78
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""
"PrusaSlicer heeft een system SSL certificate store gedetecteerd in: %1%"

#: src/slic3r/Utils/Http.cpp:82
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""
"Om het systeemcertificaat handmatig op te slaan, stel je de %1% "
"omgevingsvariabele in op de juiste CA bundel en start je het programma "
"opnieuw."

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""
"Initialisatie van CURL mislukt. PrusaSlicer is niet in staat een "
"netwerkverbinding in te stellen. Zie het wijzigingslogboek voor verdere "
"details."

#: src/slic3r/Utils/Process.cpp:151
msgid "Open G-code file:"
msgstr "Open G-code bestand:"

#: src/libslic3r/GCode.cpp:602
msgid "There is an object with no extrusions on the first layer."
msgstr "Er is een object zonder extrusie op de eerste laag."

#: src/libslic3r/GCode.cpp:620
msgid "Empty layers detected, the output would not be printable."
msgstr "Lege lagen gedetecteerd. De output is mogelijk niet-printbaar."

#: src/libslic3r/GCode.cpp:621
msgid "Print z"
msgstr "Print Z"

#: src/libslic3r/GCode.cpp:622
msgid ""
"This is usually caused by negligibly small extrusions or by a faulty model. "
"Try to repair the model or change its orientation on the bed."
msgstr ""
"Dit wordt normaal gesproken veroorzaakt door verwaarloosbaar smalle lijnen "
"of door een defect model. Probeer het model te repareren of verander de "
"oriëntatie op het bed."

#: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:360
msgid "Mixed"
msgstr "Gemengd"

#: src/libslic3r/Flow.cpp:61
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""
"Kan de extrusiebreedte niet berekenen voor %1%: Variabele '%2%' niet "
"beschikbaar."

#: src/libslic3r/Format/3mf.cpp:1667
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""
"Het geselecteerde 3MF-bestand is opgeslagen in een nieuwere versie van %1% "
"en is niet geschikt."

#: src/libslic3r/Format/AMF.cpp:955
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""
"Het geselecteerde AMF-bestand is opgeslagen in een nieuwere versie van %1% "
"en is niet geschikt."

#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr "onbekende fout"

#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr "te veel bestanden"

#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr "bestand te groot"

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr "niet-ondersteunde methode"

#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr "niet-ondersteunde encryptie"

#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr "niet-ondersteunde optie"

#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr "centrale map niet gevonden"

#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr "geen ZIP-archief"

#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr "ongeldige koptekst of het archief is beschadigd"

#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr "niet-ondersteund multi-disk archief"

#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr "decompressie mislukt of archief is beschadigd"

#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr "compressie mislukt"

#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr "onverwachte gedecomprimeerde grootte"

#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr "CRC-32 check mislukt"

#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr "niet-ondersteunde centrale mapgrootte"

#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr "toewijzing mislukt"

#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr "bestand openen mislukt"

#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr "bestand creëren mislukt"

#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr "bestand schrijven mislukt"

#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr "bestand lezen mislukt"

#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr "bestand sluiten mislukt"

#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr "bestand zoeken mislukt"

#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr "bestandsstatus mislukt"

#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr "ongeldige parameter"

#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr "ongeldige bestandsnaam"

#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr "buffer te klein"

#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr "interne fout"

#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr "bestand niet gevonden"

#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr "archief te groot"

#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr "validatie mislukt"

#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr "terugschrijven mislukt"

#: src/libslic3r/Preset.cpp:1258
msgid "filament"
msgstr "filament"

#: src/libslic3r/Print.cpp:1246
msgid "All objects are outside of the print volume."
msgstr "Alle objecten bevinden zich buiten het printvolume."

#: src/libslic3r/Print.cpp:1249
msgid "The supplied settings will cause an empty print."
msgstr "De ingevoerde instellingen resulteren in een lege print."

#: src/libslic3r/Print.cpp:1253
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""
"Sommige objecten staan te dicht op elkaar. De extruder zal er tegenaan "
"botsen."

#: src/libslic3r/Print.cpp:1255
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""
"Sommige objecten zijn te groot en kunnen niet geprint worden zonder "
"botsingen."

#: src/libslic3r/Print.cpp:1264
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr "De spiraalmodus kan alleen gebruikt worden voor enkeldelige objecten."

#: src/libslic3r/Print.cpp:1271
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""
"De spiraalmodus kan alleen gebruikt worden met enkel-materiaal objecten."

#: src/libslic3r/Print.cpp:1284
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""
"Het afveegblok wordt alleen ondersteunt als alle extruders dezelfde nozzle- "
"en filamentdiameter hebben."

#: src/libslic3r/Print.cpp:1290
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
"RepRapFirmware and Repetier G-code flavors."
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor Marlin, RepRap/Sprinter, "
"RepRapFirmware en Repetier firmwaretypes."

#: src/libslic3r/Print.cpp:1292
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""
"Het afveegblok wordt alleen ondersteunt met de relatieve extruderinstelling "
"('use_relative_e_distances' = 1)."

#: src/libslic3r/Print.cpp:1294
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""
"Druippreventie wordt niet ondersteund als het afveegblok is geactiveerd."

#: src/libslic3r/Print.cpp:1296
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""
"Het afveegblok niet ondersteunt bij volumetrische extrusiewaarden "
"('use_volumetric_e' = 0)."

#: src/libslic3r/Print.cpp:1298
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""
"Het afveegblok wordt momenteel niet ondersteund voor multi-materiaal "
"achtereenvolgens printen."

#: src/libslic3r/Print.cpp:1319
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze een "
"gelijke laagdikte hebben"

#: src/libslic3r/Print.cpp:1321
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als deze op "
"een gelijk aantal raftlagen zijn geplaatst"

#: src/libslic3r/Print.cpp:1323
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als de "
"instelling 'support_material_contact_distance' gelijk staat"

#: src/libslic3r/Print.cpp:1325
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""
"Het afveegblok wordt alleen ondersteunt voor meerdere objecten als ze "
"tegelijk gesliced worden."

#: src/libslic3r/Print.cpp:1367
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""
"Het afveegblok wordt alleen ondersteunt als alle objecten dezelfde variabele "
"laagdikte hebben"

#: src/libslic3r/Print.cpp:1393
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""
"Een of meer objecten staan ingesteld op een extruder die de printer niet "
"heeft."

#: src/libslic3r/Print.cpp:1402
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr "%1%=%2% mm is te weinig om te printen bij een laagdikte van %3% mm"

#: src/libslic3r/Print.cpp:1405
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr "Te veel %1%=%2% mm om te printen met een nozzlediameter van %3% mm"

#: src/libslic3r/Print.cpp:1416
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"Printen met meerdere extruders met verschillende nozzlediameters. Als "
"support met de huidige extruder geprint moet worden, moeten alle nozzles "
"dezelfde diameter hebben ('support_material_extruder' = 0 of "
"'support_material_interface_extruder' = 0)."

#: src/libslic3r/Print.cpp:1424
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"Om het afveegblok te laten samenwerken met oplosbare support, moeten de "
"supportlagen gesynchroniseerd worden met de objectlagen."

#: src/libslic3r/Print.cpp:1428
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"Het afveegblok ondersteunt alleen niet-oplosbaar support als dat geprint "
"worden met de huidige extruder zonder toolwissel (Zet zowel "
"'support_material_extruder' en 'support_material_interface_extruder' op 0)."

#: src/libslic3r/Print.cpp:1450
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""
"Laagdikte van de eerste laag kan niet groter zijn dan de nozzlediameter"

#: src/libslic3r/Print.cpp:1455
msgid "Layer height can't be greater than nozzle diameter"
msgstr "Laagdikte kan niet groter zijn dan de nozzlediameter"

#: src/libslic3r/Print.cpp:1614
msgid "Infilling layers"
msgstr "Vullingslagen"

#: src/libslic3r/Print.cpp:1640
msgid "Generating skirt"
msgstr "Skirt genereren"

#: src/libslic3r/Print.cpp:1649
msgid "Generating brim"
msgstr "Brim genereren"

#: src/libslic3r/Print.cpp:1672
msgid "Exporting G-code"
msgstr "G-code exporteren"

#: src/libslic3r/Print.cpp:1676
msgid "Generating G-code"
msgstr "G-code genereren"

#: src/libslic3r/SLA/Pad.cpp:532
msgid "Pad brim size is too small for the current configuration."
msgstr "Brimgrootte is te klein voor de huidige configuratie."

#: src/libslic3r/SLAPrint.cpp:628
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""
"Kan niet doorgaan zonder supportpunten! Voeg supportpunten toe of schakel "
"supportgeneratie uit."

#: src/libslic3r/SLAPrint.cpp:640
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""
"Verhoging is te klein voor het object. Gebruik de 'Basisplaat rondom object'-"
"optie om het object zonder verhoging te printen."

#: src/libslic3r/SLAPrint.cpp:646
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""
"De uiteinden van de pijlers worden ingezet op de gaten tussen het object en "
"de basisplaat. De instelling 'Veilige afstand voor supportbasis' moet groter "
"zijn dan de 'Basisplaat-objectgat'-parameter hiervoor."

#: src/libslic3r/SLAPrint.cpp:661
msgid "Exposition time is out of printer profile bounds."
msgstr "De belichtingstijd valt buiten de grenzen van het printerprofiel."

#: src/libslic3r/SLAPrint.cpp:668
msgid "Initial exposition time is out of printer profile bounds."
msgstr "Initiële belichtingstijd valt buiten de printerprofielgrenzen."

#: src/libslic3r/SLAPrint.cpp:784
msgid "Slicing done"
msgstr "Slicen voltooid"

#: src/libslic3r/SLAPrintSteps.cpp:44
msgid "Hollowing model"
msgstr "Model uithollen"

#: src/libslic3r/SLAPrintSteps.cpp:45
msgid "Drilling holes into model."
msgstr "Afvoergaten toevoegen."

#: src/libslic3r/SLAPrintSteps.cpp:46
msgid "Slicing model"
msgstr "Model slicen"

#: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:359
msgid "Generating support points"
msgstr "Supportpunten genereren"

#: src/libslic3r/SLAPrintSteps.cpp:48
msgid "Generating support tree"
msgstr "Supportboom genereren"

#: src/libslic3r/SLAPrintSteps.cpp:49
msgid "Generating pad"
msgstr "Basisplaat genereren"

#: src/libslic3r/SLAPrintSteps.cpp:50
msgid "Slicing supports"
msgstr "Support slicen"

#: src/libslic3r/SLAPrintSteps.cpp:65
msgid "Merging slices and calculating statistics"
msgstr "Slices samenvoegen en statistieken berekenen"

#: src/libslic3r/SLAPrintSteps.cpp:66
msgid "Rasterizing layers"
msgstr "Lagen roosteren"

#: src/libslic3r/SLAPrintSteps.cpp:192
msgid "Too many overlapping holes."
msgstr "Te veel overlappende gaten."

#: src/libslic3r/SLAPrintSteps.cpp:201
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""
"Afvoergaten toevoegen mislukt. Dit komt meestal door een incorrect model. "
"Probeer die eerst te repareren."

#: src/libslic3r/SLAPrintSteps.cpp:247
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""
"Slicen moest gestopt worden door een interne fout: inconsistente slice-index."

#: src/libslic3r/SLAPrintSteps.cpp:411 src/libslic3r/SLAPrintSteps.cpp:420
#: src/libslic3r/SLAPrintSteps.cpp:459
msgid "Visualizing supports"
msgstr "Visualiseer support"

#: src/libslic3r/SLAPrintSteps.cpp:451
msgid "No pad can be generated for this model with the current configuration"
msgstr ""
"Met de huidige configuratie kan voor dit model geen basisplaat gegenereerd "
"worden"

#: src/libslic3r/SLAPrintSteps.cpp:619
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""
"Er zijn niet-printbare objecten. Probeer de supportinstellingen te "
"veranderen om het object printbaar te maken."

#: src/libslic3r/PrintBase.cpp:72
msgid "Failed processing of the output_filename_format template."
msgstr "Verwerken van de 'output_filename_format'-template mislukt."

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr "Printertechnologie"

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr "Bedvorm"

#: src/libslic3r/PrintConfig.cpp:56
msgid "Bed custom texture"
msgstr "Custom bedtextuur"

#: src/libslic3r/PrintConfig.cpp:61
msgid "Bed custom model"
msgstr "Custom bedmodel"

#: src/libslic3r/PrintConfig.cpp:66
msgid "Picture sizes to be stored into a .gcode and .sl1 files"
msgstr "Afbeeldingsgrootte om op te slaan in gcode- en SL1-bestanden"

#: src/libslic3r/PrintConfig.cpp:73
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"Deze instelling is voor de laagdikte (en dus het totaal aantal lagen). "
"Dunnere lagen geven een betere nauwkeurigheid, maar het printen duurt langer."

#: src/libslic3r/PrintConfig.cpp:80
msgid "Max print height"
msgstr "Maximale printhoogte"

#: src/libslic3r/PrintConfig.cpp:81
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""
"Stel dit in als maximale hoogte die bereikt kan worden door de printer."

#: src/libslic3r/PrintConfig.cpp:89
msgid "Slice gap closing radius"
msgstr "Gatvulradius"

#: src/libslic3r/PrintConfig.cpp:91
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"Gaten die kleiner zijn dan tweemaal de gatvulradius worden opgevuld tijdens "
"het slicen. Het vullen kan zorgen dat de printresolutie minder wordt. Daarom "
"wordt geadviseerd de waarde laag te houden."

#: src/libslic3r/PrintConfig.cpp:99
msgid "Hostname, IP or URL"
msgstr "Hostnaam, IP of URL"

#: src/libslic3r/PrintConfig.cpp:100
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""
"PrusaSlicer kan gcode-bestanden naar een printerhost uploaden. Dit veld moet "
"de hostnaam, IP-adres of URL van de printerhostomgeving bevatten."

#: src/libslic3r/PrintConfig.cpp:106
msgid "API Key / Password"
msgstr "API-key / wachtwoord"

#: src/libslic3r/PrintConfig.cpp:107
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"PrusaSlicer kan gcode-bestanden naar een printerhost uploaden. Dit veld moet "
"de API-key of het wachtwoord voor authenticatie bevatten."

#: src/libslic3r/PrintConfig.cpp:114
msgid "Name of the printer"
msgstr "Naam van de printer"

#: src/libslic3r/PrintConfig.cpp:121
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
"Aangepast CA-certificaatbestand kan gespecificeerd worden voor HTTPS-"
"OctoPrint verbindingen in CRT/PEM-formaat. Als er niets wordt ingevuld, "
"wordt de standaard OS-CA-certificaatopslaglocatie gebruikt."

#: src/libslic3r/PrintConfig.cpp:127
msgid "Elephant foot compensation"
msgstr "Squish-compensatie"

#: src/libslic3r/PrintConfig.cpp:129
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"De eerste laag wordt verkleind in horizontale richting met de ingestelde "
"waarde ter compensatie van het platdrukken."

#: src/libslic3r/PrintConfig.cpp:145
msgid "Password"
msgstr "Wachtwoord"

#: src/libslic3r/PrintConfig.cpp:151
msgid "Printer preset name"
msgstr "Printer-presetnaam"

#: src/libslic3r/PrintConfig.cpp:152
msgid "Related printer preset name"
msgstr "Gerelateerde printer-presetnaam"

#: src/libslic3r/PrintConfig.cpp:157
msgid "Authorization Type"
msgstr "Authorisatietype"

#: src/libslic3r/PrintConfig.cpp:176
msgid "Avoid crossing perimeters"
msgstr "Vermijd kruisende perimeters"

#: src/libslic3r/PrintConfig.cpp:177
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"Optimaliseer de bewegingen om kruisende perimeters te minimaliseren. Dit is "
"handig bij Bowden-extruders die gevoelig zijn voor druipen. Deze aanpassing "
"vertraagd zowel de print als de G-code-generatie."

#: src/libslic3r/PrintConfig.cpp:184 src/libslic3r/PrintConfig.cpp:2197
msgid "Other layers"
msgstr "Overige lagen"

#: src/libslic3r/PrintConfig.cpp:185
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""
"Bedtemperatuur voor lagen na de eerste laag. Als dit ingesteld is op 0, "
"worden bedverwarmingscommando's uitgezet."

#: src/libslic3r/PrintConfig.cpp:188
msgid "Bed temperature"
msgstr "Bedtemperatuur"

#: src/libslic3r/PrintConfig.cpp:195
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"Deze custom code wordt toegevoegd bij elke laagwisseling, vlak voor de Z-"
"beweging. U kunt hier variabelen gebruiken voor alle instellingen zoals "
"'layer_num' en 'layer_z'."

#: src/libslic3r/PrintConfig.cpp:205
msgid "Between objects G-code"
msgstr "G-code die komt tussen objecten"

#: src/libslic3r/PrintConfig.cpp:206
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"Deze code wordt ingevoegd tussen objecten bij het achtereenvolgens printen. "
"Standaard worden de extruder- en bedtemperatuur gereset met een wacht-niet-"
"commando, hoewel, als M104, M109, M140 of M190 in de custom code worden "
"gedetecteerd zal PrusaSlicer deze commando's niet meenemen. Merk op dat "
"variabelen voor alle instellingen gebruikt kunnen worden."

#: src/libslic3r/PrintConfig.cpp:217
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "Aantal te genereren dichte lagen voor ondervlakken."

#: src/libslic3r/PrintConfig.cpp:218
msgid "Bottom solid layers"
msgstr "Dichte bodemlagen"

#: src/libslic3r/PrintConfig.cpp:226
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""
"Het aantal dichte bodemlagen wordt verhoogd als blijkt dat het nodig is om "
"de minimale bodemshelldikte te garanderen."

#: src/libslic3r/PrintConfig.cpp:228
msgid "Minimum bottom shell thickness"
msgstr "Minimale shelldikte aan de onderzijde"

#: src/libslic3r/PrintConfig.cpp:234
msgid "Bridge"
msgstr "Brug"

#: src/libslic3r/PrintConfig.cpp:235
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor bruggen. Als dit ingesteld is "
"op 0, wordt de acceleratie-instelling voor bruggen uitgezet."

#: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:380
#: src/libslic3r/PrintConfig.cpp:909 src/libslic3r/PrintConfig.cpp:1037
#: src/libslic3r/PrintConfig.cpp:1269 src/libslic3r/PrintConfig.cpp:1318
#: src/libslic3r/PrintConfig.cpp:1328 src/libslic3r/PrintConfig.cpp:1522
msgid "mm/s²"
msgstr "mm/s²"

#: src/libslic3r/PrintConfig.cpp:243
msgid "Bridging angle"
msgstr "Brughoek"

#: src/libslic3r/PrintConfig.cpp:245
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"Brughoek overschrijven. Als dit ingesteld is op 0, wordt de optimale hoek "
"automatisch berekend, anders wordt de opgegeven hoek voor alle bruggen "
"gebruikt. 180° staat gelijk aan 0°."

#: src/libslic3r/PrintConfig.cpp:248 src/libslic3r/PrintConfig.cpp:823
#: src/libslic3r/PrintConfig.cpp:1759 src/libslic3r/PrintConfig.cpp:1769
#: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/PrintConfig.cpp:2182
#: src/libslic3r/PrintConfig.cpp:2381 src/libslic3r/PrintConfig.cpp:2882
#: src/libslic3r/PrintConfig.cpp:3003
msgid "°"
msgstr "°"

#: src/libslic3r/PrintConfig.cpp:254
msgid "Bridges fan speed"
msgstr "Ventilatorsnelheid voor bruggen"

#: src/libslic3r/PrintConfig.cpp:255
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "Deze ventilatorsnelheid wordt aangehouden bij bruggen en overhanging."

#: src/libslic3r/PrintConfig.cpp:256 src/libslic3r/PrintConfig.cpp:835
#: src/libslic3r/PrintConfig.cpp:1157 src/libslic3r/PrintConfig.cpp:1336
#: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1651
#: src/libslic3r/PrintConfig.cpp:2559 src/libslic3r/PrintConfig.cpp:2796
#: src/libslic3r/PrintConfig.cpp:2922
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:263
msgid "Bridge flow ratio"
msgstr "Brugextrusieverhouding"

#: src/libslic3r/PrintConfig.cpp:265
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"Deze factor beïnvloedt de hoeveelheid plastic voor bruggen. Deze kan "
"verlaagd worden om het extrudaat strak te trekken en doorzakking te "
"voorkomen. Hoewel de systeemwaarden goed zijn, kan geëxperimenteerd worden "
"met de koeling voor dit aangepast wordt."

#: src/libslic3r/PrintConfig.cpp:275
msgid "Bridges"
msgstr "Bruggen"

#: src/libslic3r/PrintConfig.cpp:277
msgid "Speed for printing bridges."
msgstr "Printsnelheid voor bruggen."

#: src/libslic3r/PrintConfig.cpp:278 src/libslic3r/PrintConfig.cpp:652
#: src/libslic3r/PrintConfig.cpp:660 src/libslic3r/PrintConfig.cpp:669
#: src/libslic3r/PrintConfig.cpp:677 src/libslic3r/PrintConfig.cpp:704
#: src/libslic3r/PrintConfig.cpp:723 src/libslic3r/PrintConfig.cpp:973
#: src/libslic3r/PrintConfig.cpp:1103 src/libslic3r/PrintConfig.cpp:1176
#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1286
#: src/libslic3r/PrintConfig.cpp:1298 src/libslic3r/PrintConfig.cpp:1308
#: src/libslic3r/PrintConfig.cpp:1358 src/libslic3r/PrintConfig.cpp:1417
#: src/libslic3r/PrintConfig.cpp:1552 src/libslic3r/PrintConfig.cpp:1726
#: src/libslic3r/PrintConfig.cpp:1735 src/libslic3r/PrintConfig.cpp:2161
#: src/libslic3r/PrintConfig.cpp:2288
msgid "mm/s"
msgstr "mm/s"

#: src/libslic3r/PrintConfig.cpp:285
msgid "Brim width"
msgstr "Breedte van de brim"

#: src/libslic3r/PrintConfig.cpp:286
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""
"Horizontale breedte van de brim die rond elk object op de eerste laag wordt "
"geprint."

#: src/libslic3r/PrintConfig.cpp:293
msgid "Clip multi-part objects"
msgstr "Meerdelige objecten samenvoegen"

#: src/libslic3r/PrintConfig.cpp:294
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"Als meerdere multi-materialobjecten worden geprint, zorgt deze instelling "
"dat PrusaSlicer de overlappende delen met de vorige in de reeks combineert "
"(2e deel wordt gecombineerd met het 1e, 3e deel met het 1e en 2e, etc)."

#: src/libslic3r/PrintConfig.cpp:301
msgid "Colorprint height"
msgstr "Kleurenprinthoogte"

#: src/libslic3r/PrintConfig.cpp:302
msgid "Heights at which a filament change is to occur."
msgstr "Hoogte waarbij de filamentwissel plaatsvindt."

#: src/libslic3r/PrintConfig.cpp:312
msgid "Compatible printers condition"
msgstr "Voorwaarden geschikte printers"

#: src/libslic3r/PrintConfig.cpp:313
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van "
"een actief printerprofiel. Als deze aanduiding op waar staat, wordt dit "
"profiel beschouwd als geschikt voor het actieve printerprofiel."

#: src/libslic3r/PrintConfig.cpp:327
msgid "Compatible print profiles condition"
msgstr "Voorwaarden geschikte printprofielen"

#: src/libslic3r/PrintConfig.cpp:328
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"Een waar/niet waar aanduiding die gebruik maakt van configuratiewaarden van "
"een actief printprofiel. Als deze aanduiding op waar staat, wordt dit "
"profiel beschouwd als geschikt voor het actieve printprofiel."

#: src/libslic3r/PrintConfig.cpp:345
msgid "Complete individual objects"
msgstr "Voltooi individuele objecten"

#: src/libslic3r/PrintConfig.cpp:346
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"Als meerdere objecten geprint worden, zorgt deze optie dat de objecten "
"afzonderlijk voltooid worden voordat bewogen wordt naar de volgende. "
"PrusaSlicer voorkomt botsingen van de extruder tegen eerder geprinte "
"objecten en zal u daar ook voor waarschuwen, maar blijf wel alert."

#: src/libslic3r/PrintConfig.cpp:354
msgid "Enable auto cooling"
msgstr "Automatisch koelen toestaan"

#: src/libslic3r/PrintConfig.cpp:355
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""
"Dit vinkje zorgt dat automatisch gekoeld wordt; de print- en "
"ventilatorsnelheid worden aangepast op basis van de laagprinttijd."

#: src/libslic3r/PrintConfig.cpp:360
msgid "Cooling tube position"
msgstr "Koelbuispositie"

#: src/libslic3r/PrintConfig.cpp:361
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "Afstand vanaf de nozzle tot het middelpunt van de koelbuis."

#: src/libslic3r/PrintConfig.cpp:368
msgid "Cooling tube length"
msgstr "Koelbuislengte"

#: src/libslic3r/PrintConfig.cpp:369
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""
"Lengte van de koelbuis om de ruimte voor koelbewegingen daarin te beperken."

#: src/libslic3r/PrintConfig.cpp:377
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"Dit is de acceleratie waarop uw printer wordt ingesteld na een specifieke "
"acceleratiewaarde (perimeters/vulling). Als dit ingesteld is op 0, worden "
"geen acceleratiewaarden opnieuw ingesteld."

#: src/libslic3r/PrintConfig.cpp:386
msgid "Default filament profile"
msgstr "Standaard filamentprofiel"

#: src/libslic3r/PrintConfig.cpp:387
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"Standaard filamentprofiel dat geassocieerd wordt met huidig printerprofiel. "
"Bij selectie van het huidige printerprofiel wordt dit filamentprofiel "
"geactiveerd."

#: src/libslic3r/PrintConfig.cpp:393
msgid "Default print profile"
msgstr "Standaard printprofiel"

#: src/libslic3r/PrintConfig.cpp:394 src/libslic3r/PrintConfig.cpp:2726
#: src/libslic3r/PrintConfig.cpp:2737
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"Standaard printprofiel dat geassocieerd wordt met huidig printerprofiel. Bij "
"selectie van het huidige printerprofiel wordt dit printprofiel geactiveerd."

#: src/libslic3r/PrintConfig.cpp:400
msgid "Disable fan for the first"
msgstr "Zet ventilator uit voor de eerste"

#: src/libslic3r/PrintConfig.cpp:401
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"U kunt dit instellen op een positieve waarde om de ventilator uit te "
"schakelen tijdens het printen van de eerste lagen voor een betere adhesie."

#: src/libslic3r/PrintConfig.cpp:410
msgid "Don't support bridges"
msgstr "Geen support voor bruggen"

#: src/libslic3r/PrintConfig.cpp:412
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr "Experimentele optie om support onder brugvlakken te vermijden."

#: src/libslic3r/PrintConfig.cpp:418
msgid "Distance between copies"
msgstr "Ruimte tussen kopieën"

#: src/libslic3r/PrintConfig.cpp:419
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""
"Gebruikte afstand tussen objecten bij automatisch schikken in de 3D-weergave."

#: src/libslic3r/PrintConfig.cpp:427
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""
"Deze eindprocedure wordt aan het eind van het outputbestand ingevoegd. Merk "
"op dat variabelen voor alle instellingen gebruikt kunnen worden."

#: src/libslic3r/PrintConfig.cpp:437
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""
"Deze eindprocedure is ingevoegd aan het eind van het outputbestand, nog voor "
"de eind G-code (en voor de toolwisselingen). Merk op dat variabelen voor "
"alle instellingen gebruikt kunnen worden. Als de printer meerdere extruders "
"heeft, wordt deze G-code in de extrudervolgorde uitgevoerd."

#: src/libslic3r/PrintConfig.cpp:448
msgid "Ensure vertical shell thickness"
msgstr "Garandeer verticale shelldikte"

#: src/libslic3r/PrintConfig.cpp:450
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""
"Voeg dichte vulling toe bij hellende vlakken om de verticale shelldikte te "
"garanderen."

#: src/libslic3r/PrintConfig.cpp:456
msgid "Top fill pattern"
msgstr "Vulpatroon voor bovenzijde"

#: src/libslic3r/PrintConfig.cpp:458
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""
"Vullingspatroon voor bovenste lagen. Dit heeft alleen invloed op de bovenste "
"zichtbare laag en niet de aangrenzende horizontale dichte shells."

#: src/libslic3r/PrintConfig.cpp:467 src/libslic3r/PrintConfig.cpp:888
#: src/libslic3r/PrintConfig.cpp:2142
msgid "Rectilinear"
msgstr "Rechtlijnig"

#: src/libslic3r/PrintConfig.cpp:468
msgid "Monotonic"
msgstr "Monotoon"

#: src/libslic3r/PrintConfig.cpp:469 src/libslic3r/PrintConfig.cpp:894
msgid "Concentric"
msgstr "Concentrisch"

#: src/libslic3r/PrintConfig.cpp:470 src/libslic3r/PrintConfig.cpp:898
msgid "Hilbert Curve"
msgstr "Hilbert-kromme"

#: src/libslic3r/PrintConfig.cpp:471 src/libslic3r/PrintConfig.cpp:899
msgid "Archimedean Chords"
msgstr "Archimedes-spiraal"

#: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:900
msgid "Octagram Spiral"
msgstr "Octagramspiraal"

#: src/libslic3r/PrintConfig.cpp:478
msgid "Bottom fill pattern"
msgstr "Vulpatroon voor onderzijde"

#: src/libslic3r/PrintConfig.cpp:480
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""
"Vulpatroon voor de bodemlaag. Dit heeft alleen invloed op de onderste "
"zichtbare laag en niet de aangrenzende horizontale dichte shells."

#: src/libslic3r/PrintConfig.cpp:489 src/libslic3r/PrintConfig.cpp:500
msgid "External perimeters"
msgstr "Buitenste perimeters"

#: src/libslic3r/PrintConfig.cpp:491
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de buitenste perimeters. Als die op 0 blijft staan, zal PrusaSlicer de "
"breedte instellen op 1,125x de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:494 src/libslic3r/PrintConfig.cpp:603
#: src/libslic3r/PrintConfig.cpp:931 src/libslic3r/PrintConfig.cpp:944
#: src/libslic3r/PrintConfig.cpp:1068 src/libslic3r/PrintConfig.cpp:1094
#: src/libslic3r/PrintConfig.cpp:1542 src/libslic3r/PrintConfig.cpp:1867
#: src/libslic3r/PrintConfig.cpp:2016 src/libslic3r/PrintConfig.cpp:2084
#: src/libslic3r/PrintConfig.cpp:2245
msgid "mm or %"
msgstr "mm of %"

#: src/libslic3r/PrintConfig.cpp:502
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Deze instelling heeft effect op de snelheid van buitenste perimeters. Als "
"dit is uitgedrukt als percentage, wordt deze genomen over de snelheid van de "
"perimeters. Als dit ingesteld is op 0, wordt een automatische snelheid "
"genomen."

#: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:953
#: src/libslic3r/PrintConfig.cpp:1826 src/libslic3r/PrintConfig.cpp:1878
#: src/libslic3r/PrintConfig.cpp:2128 src/libslic3r/PrintConfig.cpp:2258
msgid "mm/s or %"
msgstr "mm/s of %"

#: src/libslic3r/PrintConfig.cpp:512
msgid "External perimeters first"
msgstr "Buitenste perimeters eerst"

#: src/libslic3r/PrintConfig.cpp:514
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""
"Print de buitenste perimeters eerder dan de binnenste in plaats van andersom."

#: src/libslic3r/PrintConfig.cpp:520
msgid "Extra perimeters if needed"
msgstr "Extra perimeters indien nodig"

#: src/libslic3r/PrintConfig.cpp:522
#, c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"Voeg meer perimeters toe als dat nodig is voor het voorkomen van gaten in "
"hellende wanden. PrusaSlicer blijft perimeters toevoegen tot meer dan 70% "
"van de perimeters daarboven direct is ondersteund."

#: src/libslic3r/PrintConfig.cpp:532
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"De extruder die gebruikt wordt (behalve als meer specifieke "
"extruderinstellingen zijn aangegeven). Deze waarde overschrijft de "
"perimeter- en vullingsextruder, maar niet de supportextruders."

#: src/libslic3r/PrintConfig.cpp:544
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"Stel dit in als verticale afstand tussen de nozzlepunt en de geleidestangen "
"van de X-as. In andere woorden; dit is de hoogte van de vrijloopcilinder "
"rond de extruder en geeft de maximale diepte weer die de extruder kan halen "
"zonder te botsen met eerder geprinte objecten."

#: src/libslic3r/PrintConfig.cpp:555
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"Stel dit in als vrijloopradius rond de extruder. Kies de hoogste waarde "
"(voor de veiligheid) als de extruder niet is gecentreerd. Deze instelling "
"wordt gebruikt om te controleren op botsingen en om te tonen in de 3D-"
"weergave."

#: src/libslic3r/PrintConfig.cpp:565
msgid "Extruder Color"
msgstr "Extruderkleur"

#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:626
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""
"Dit wordt alleen gebruikt in de PrusaSlicer-interface als een visueel "
"hulpmiddel."

#: src/libslic3r/PrintConfig.cpp:572
msgid "Extruder offset"
msgstr "Extruder-offset"

#: src/libslic3r/PrintConfig.cpp:573
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"Als uw firmware extrudercompensatie niet toestaat, kan daar rekening mee "
"gehouden worden in de G-code. Met deze optie kunt u de compensatie per "
"extruder specificeren op basis van de eerste extruder. Hiervoor zijn "
"positieve coördinaten nodig (die worden van de X- en Y-coördinaten "
"afgetrokken)."

#: src/libslic3r/PrintConfig.cpp:582
msgid "Extrusion axis"
msgstr "Extrusie-as"

#: src/libslic3r/PrintConfig.cpp:583
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"Gebruik deze optie om de naam van de as van de extruder in te stellen "
"(normaal gesproken E, maar soms A)."

#: src/libslic3r/PrintConfig.cpp:588
msgid "Extrusion multiplier"
msgstr "Extrusie vermenigvuldigingsfactor"

#: src/libslic3r/PrintConfig.cpp:589
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"Deze factor verandert het debiet proportioneel. U kunt deze fijnstellen om "
"een mooi oppervlak en dunne wanden te krijgen. Waarden liggen normaal tussen "
"0.9 en 1.1. Check eventueel de filamentdiameter en de extruderstappen (uit "
"de firmware) als u denkt dat dit aangepast moet worden."

#: src/libslic3r/PrintConfig.cpp:597
msgid "Default extrusion width"
msgstr "Standaard extrusiebreedte"

#: src/libslic3r/PrintConfig.cpp:599
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte. Als "
"die op 0 blijft staan, zal PrusaSlicer de extrusiebreedte aanpassen op basis "
"van de nozzlediameter. Als dit is uitgedrukt als percentage, wordt dit "
"berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:609
msgid "Keep fan always on"
msgstr "Laat ventilator altijd aan"

#: src/libslic3r/PrintConfig.cpp:610
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"Als dit is ingeschakeld zal de ventilator nooit uitgezet worden, maar "
"tenminste de ingestelde minimale snelheid aanhouden."

#: src/libslic3r/PrintConfig.cpp:615
msgid "Enable fan if layer print time is below"
msgstr "Schakel de ventilator in bij een printtijd korter dan"

#: src/libslic3r/PrintConfig.cpp:616
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"Als de printtijd voor een laag onder dit aantal seconden komt, zal de "
"ventilator aangezet worden en wordt de snelheid berekend door te "
"interpoleren tussen de minimale en maximale snelheid."

#: src/libslic3r/PrintConfig.cpp:618 src/libslic3r/PrintConfig.cpp:1814
msgid "approximate seconds"
msgstr "geschat aantal seconden"

#: src/libslic3r/PrintConfig.cpp:631
msgid "Filament notes"
msgstr "Filamentopmerkingen"

#: src/libslic3r/PrintConfig.cpp:632
msgid "You can put your notes regarding the filament here."
msgstr "Hier kunt u opmerkingen over het filament plaatsen."

#: src/libslic3r/PrintConfig.cpp:640 src/libslic3r/PrintConfig.cpp:1364
msgid "Max volumetric speed"
msgstr "Maximale volumetrische snelheid"

#: src/libslic3r/PrintConfig.cpp:641
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"Maximale volumetrische snelheid is toegestaan voor dit filament. Dit beperkt "
"de maximale volumetrische snelheid van een print tot het minimum van de "
"maximale volumetrische snelheid van de print en het filament. Als dit "
"ingesteld is op 0, geldt er geen limiet."

#: src/libslic3r/PrintConfig.cpp:650
msgid "Loading speed"
msgstr "Laadsnelheid"

#: src/libslic3r/PrintConfig.cpp:651
msgid "Speed used for loading the filament on the wipe tower."
msgstr "Snelheid die gebruikt wordt voor het afveegblok."

#: src/libslic3r/PrintConfig.cpp:658
msgid "Loading speed at the start"
msgstr "Laadsnelheid aan het begin"

#: src/libslic3r/PrintConfig.cpp:659
msgid "Speed used at the very beginning of loading phase."
msgstr "Snelheid die gebruikt wordt aan het begin van de laadfase."

#: src/libslic3r/PrintConfig.cpp:666
msgid "Unloading speed"
msgstr "Ontlaadsnelheid"

#: src/libslic3r/PrintConfig.cpp:667
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""
"Snelheid die gebruikt wordt voor het ontladen van het afveegblok (heeft geen "
"effect op het initiële onderdeel van het ontladen direct na de ramming)."

#: src/libslic3r/PrintConfig.cpp:675
msgid "Unloading speed at the start"
msgstr "Ontlaadsnelheid in het begin"

#: src/libslic3r/PrintConfig.cpp:676
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""
"Snelheid die gebruikt wordt voor het ontladen van het filament direct na de "
"ramming."

#: src/libslic3r/PrintConfig.cpp:683
msgid "Delay after unloading"
msgstr "Vertraging na het ontladen"

#: src/libslic3r/PrintConfig.cpp:684
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""
"Wachttijd voor het ontladen van het filament. Dit kan helpen om betrouwbare "
"toolwisselingen te krijgen met flexibele materialen die meer tijd nodig "
"hebben om te krimpen naar de originele afmetingen."

#: src/libslic3r/PrintConfig.cpp:693
msgid "Number of cooling moves"
msgstr "Aantal koelbewegingen"

#: src/libslic3r/PrintConfig.cpp:694
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""
"Het filament wordt gekoeld tijdens het terug en voorwaarts bewegen in de "
"koelbuis. Specificeer het benodigd aantal bewegingen."

#: src/libslic3r/PrintConfig.cpp:702
msgid "Speed of the first cooling move"
msgstr "Snelheid voor de eerste koelbeweging"

#: src/libslic3r/PrintConfig.cpp:703
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr ""
"Koelbewegingen worden gelijkmatig versneld, beginnend vanaf deze snelheid."

#: src/libslic3r/PrintConfig.cpp:710
msgid "Minimal purge on wipe tower"
msgstr "Minimale afstand op afveegblok"

#: src/libslic3r/PrintConfig.cpp:711
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"Na een toolwissel is de exacte locatie van het geladen filament onbekend en "
"zal de druk op het filament niet stabiel zijn. Voor het afvegen van de "
"printkop in de vulling zal PrusaSlicer eerst deze hoeveelheid materiaal "
"afvegen aan het afveegblok om vervolgens de vulling of overige objecten goed "
"te kunnen printen."

#: src/libslic3r/PrintConfig.cpp:715
msgid "mm³"
msgstr "mm³"

#: src/libslic3r/PrintConfig.cpp:721
msgid "Speed of the last cooling move"
msgstr "Snelheid voor de laatste koelbeweging"

#: src/libslic3r/PrintConfig.cpp:722
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr "Koelbewegingen versnellen gelijkmatig tot aan deze snelheid."

#: src/libslic3r/PrintConfig.cpp:729
msgid "Filament load time"
msgstr "Laadtijd van het filament"

#: src/libslic3r/PrintConfig.cpp:730
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Tijd voor de printerfirmware (of de MMU 2.0) om nieuw filament te laden "
"tijdens een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd "
"wordt toegevoegd aan de totale printtijd in de tijdsschatting."

#: src/libslic3r/PrintConfig.cpp:737
msgid "Ramming parameters"
msgstr "Rammingparameters"

#: src/libslic3r/PrintConfig.cpp:738
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""
"Deze frase is bewerkt door het Rammingdialoog en bevat parameters voor de "
"ramming."

#: src/libslic3r/PrintConfig.cpp:744
msgid "Filament unload time"
msgstr "Ontlaadtijd voor filament"

#: src/libslic3r/PrintConfig.cpp:745
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Tijd voor de printerfirmware (of de MMU 2.0) om filament te ontladen tijdens "
"een toolwissel (tijdens het uitvoeren van de T-code). Deze tijd wordt "
"toegevoegd aan de totale printtijd in de tijdsschatting."

#: src/libslic3r/PrintConfig.cpp:753
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"Stel hier de filamentdiameter in. De juiste precisie is benodigd. Gebruik "
"daarom een schuifmaat en doe meerdere metingen over het hele filament. "
"Bereken vervolgens het gemiddelde."

#: src/libslic3r/PrintConfig.cpp:760 src/libslic3r/PrintConfig.cpp:2637
#: src/libslic3r/PrintConfig.cpp:2638
msgid "Density"
msgstr "Dichtheid"

#: src/libslic3r/PrintConfig.cpp:761
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"Stel hier de dichtheid van het filament in. Dit is slechts voor de "
"statistieken. Formule voor dichtheid: dichtheid[g/cm³] = massa[g] / "
"volume[cm³]. Formule voor volume: volume[cm³] = 1000 * (diameter[mm])² * π / "
"4 * lengte[mm]. Bepaal het gewicht door te wegen en het volume door te meten."

#: src/libslic3r/PrintConfig.cpp:764
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:769
msgid "Filament type"
msgstr "Filamenttype"

#: src/libslic3r/PrintConfig.cpp:770
msgid "The filament material type for use in custom G-codes."
msgstr "Het filamenttype voor het gebruik van de custom G-codes."

#: src/libslic3r/PrintConfig.cpp:797
msgid "Soluble material"
msgstr "Oplosbaar materiaal"

#: src/libslic3r/PrintConfig.cpp:798
msgid "Soluble material is most likely used for a soluble support."
msgstr "Oplosbaar materiaal wordt vaak gebruikt voor oplosbaar support."

#: src/libslic3r/PrintConfig.cpp:804
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""
"Voer hier de filamentkosten per kilogram in. Dit is alleen voor statistische "
"informatie."

#: src/libslic3r/PrintConfig.cpp:805
msgid "money/kg"
msgstr "€/kg"

#: src/libslic3r/PrintConfig.cpp:814 src/libslic3r/PrintConfig.cpp:2721
msgid "(Unknown)"
msgstr "(Onbekend)"

#: src/libslic3r/PrintConfig.cpp:818
msgid "Fill angle"
msgstr "Vullingshoek"

#: src/libslic3r/PrintConfig.cpp:820
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"Standaard basishoek voor de vullingsrichting. Hier wordt kruislings overheen "
"geprint. Bruggen worden geprint met de optimale richting. Deze instelling "
"zal die richting niet beïnvloeden."

#: src/libslic3r/PrintConfig.cpp:832
msgid "Fill density"
msgstr "Vullingsdichtheid"

#: src/libslic3r/PrintConfig.cpp:834
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""
"Dichtheid van inwendige vulling, uitgedrukt in een percentage (0 - 100%)"

#: src/libslic3r/PrintConfig.cpp:869
msgid "Fill pattern"
msgstr "Vullingspatroon"

#: src/libslic3r/PrintConfig.cpp:871
msgid "Fill pattern for general low-density infill."
msgstr "Vulpatroon voor algemene lagere-dichtheidsvulling."

#: src/libslic3r/PrintConfig.cpp:889
msgid "Grid"
msgstr "Raster"

#: src/libslic3r/PrintConfig.cpp:890
msgid "Triangles"
msgstr "Driehoeken"

#: src/libslic3r/PrintConfig.cpp:891
msgid "Stars"
msgstr "Sterren"

#: src/libslic3r/PrintConfig.cpp:892
msgid "Cubic"
msgstr "Kubisch"

#: src/libslic3r/PrintConfig.cpp:893
msgid "Line"
msgstr "Lijn"

#: src/libslic3r/PrintConfig.cpp:895 src/libslic3r/PrintConfig.cpp:2144
msgid "Honeycomb"
msgstr "Honingraat"

#: src/libslic3r/PrintConfig.cpp:896
msgid "3D Honeycomb"
msgstr "3D-honingraat"

#: src/libslic3r/PrintConfig.cpp:897
msgid "Gyroid"
msgstr "Gyroïde"

#: src/libslic3r/PrintConfig.cpp:901
msgid "Adaptive Cubic"
msgstr "Adaptief kubisch"

#: src/libslic3r/PrintConfig.cpp:902
msgid "Support Cubic"
msgstr "Ondersteunend kubisch"

#: src/libslic3r/PrintConfig.cpp:906 src/libslic3r/PrintConfig.cpp:915
#: src/libslic3r/PrintConfig.cpp:925 src/libslic3r/PrintConfig.cpp:959
msgid "First layer"
msgstr "Eerste laag"

#: src/libslic3r/PrintConfig.cpp:907
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor de eerste laag. Als dit "
"ingesteld is op 0, wordt de standaard acceleratie gebruikt."

#: src/libslic3r/PrintConfig.cpp:916
msgid "First layer bed temperature"
msgstr "Bedtemperatuur eerste laag"

#: src/libslic3r/PrintConfig.cpp:917
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""
"Bedtemperatuur voor de eerste laag. Als dit ingesteld is op 0, worden "
"bedtemperatuur-commando's weggelaten in de output."

#: src/libslic3r/PrintConfig.cpp:927
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de eerste laag. Dit kan gebruikt worden om dikkere lagen voor een betere "
"hechting aan het bed te gebruiken. Als dit is uitgedrukt als percentage, "
"wordt dit berekend over de laagdikte van de eerste laag. Als dit is "
"ingesteld op 0, wordt de standaard extrusiebreedte gebruikt."

#: src/libslic3r/PrintConfig.cpp:940
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""
"Als geprint wordt met hele kleine laagdiktes, moet de eerste laag iets "
"dikker geprint worden voor een betere bedhechting en tolerantie voor "
"imperfecte printplatformen. Dit kan uitgedrukt worden als een absolute "
"waarde of als percentage (bijvoorbeeld 150%) over de standaard laagdikte."

#: src/libslic3r/PrintConfig.cpp:949
msgid "First layer speed"
msgstr "Snelheid eerste laag"

#: src/libslic3r/PrintConfig.cpp:950
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"Als dit uitgedrukt wordt als absolute waarde (in mm/s), zal deze snelheid "
"toegepast worden bij alle printbewegingen van de eerste laag, onafhankelijk "
"van het type. Als dit is uitgedrukt als percentage, wordt dit berekend over "
"de standaardsnelheid."

#: src/libslic3r/PrintConfig.cpp:960
msgid "First layer nozzle temperature"
msgstr "Nozzletemperatuur eerste laag"

#: src/libslic3r/PrintConfig.cpp:961
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""
"Nozzletemperatuur voor de eerste laag. Als je handmatig de temperatuur wilt "
"wijzigen in de print, stel dit dan in op 0 om temperatuurregeling uit te "
"zetten in de G-code."

#: src/libslic3r/PrintConfig.cpp:971
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"Printsnelheid voor het gatvullen waarbij zigzag-bewegingen worden gebruikt. "
"Houd dit laag om schudden te voorkomen (wat resulteert in "
"resonantieproblemen). Als dit is ingesteld op 0, worden gaten niet gevuld."

#: src/libslic3r/PrintConfig.cpp:979
msgid "Verbose G-code"
msgstr "Opmerkingen in G-code"

#: src/libslic3r/PrintConfig.cpp:980
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"Sta dit toe om een G-code met opmerkingen te genereren. Bij elke lijn wordt "
"een opmerking geplaatst. Als u print vanaf een SD-kaart, kan de extra "
"grootte van het bestand de firmware vertragen."

#: src/libslic3r/PrintConfig.cpp:987
msgid "G-code flavor"
msgstr "G-code-variant"

#: src/libslic3r/PrintConfig.cpp:988
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""
"Sommige G- en M-commando's zijn niet universeel. Stel deze optie in om een "
"geschikte uitvoer te krijgen voor uw printer. De 'Geen extrusie'-instelling "
"kan gebruikt worden om te printen zonder materiaal te extruderen."

#: src/libslic3r/PrintConfig.cpp:1013
msgid "No extrusion"
msgstr "Geen extrusie"

#: src/libslic3r/PrintConfig.cpp:1018
msgid "Label objects"
msgstr "Label objecten"

#: src/libslic3r/PrintConfig.cpp:1019
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""
"Schakel dit in om opmerkingen in de G-code toe te voegen voor bewegingen die "
"behoren tot een object. Dit is handig voor de OctoPrint CancelObject-plugin. "
"Deze instelling is NIET geschikt voor een multi-materialsetup met één "
"extruder en 'Afvegen in object' en 'Afvegen in vulling'."

#: src/libslic3r/PrintConfig.cpp:1026
msgid "High extruder current on filament swap"
msgstr "Hoge stroomsterkte bij extruder voor filamentwissel"

#: src/libslic3r/PrintConfig.cpp:1027
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"Het kan nuttig zijn om de stroomsterkte van de extrudermotor te verhogen "
"tijdens het uitvoeren van de filamentwisseling om snelle ramming mogelijk te "
"maken en om weerstand te overwinnen tijdens het laden van filament met een "
"misvormde kop."

#: src/libslic3r/PrintConfig.cpp:1035
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor de vulling. Als dit is "
"ingesteld op 0, wordt de acceleratiecontrole uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:1043
msgid "Combine infill every"
msgstr "Combineer vulling elke"

#: src/libslic3r/PrintConfig.cpp:1045
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"Deze optie staat vullingslagen combineren toe voor een snellere print door "
"de vullingslagen stapsgewijs dikker te maken, terwijl de laagdikte van "
"perimeters behouden wordt."

#: src/libslic3r/PrintConfig.cpp:1048
msgid "Combine infill every n layers"
msgstr "Combineer vulling elke n lagen"

#: src/libslic3r/PrintConfig.cpp:1054
msgid "Infill extruder"
msgstr "Vullingsextruder"

#: src/libslic3r/PrintConfig.cpp:1056
msgid "The extruder to use when printing infill."
msgstr "De extruder die gebruikt wordt voor het printen van de vulling."

#: src/libslic3r/PrintConfig.cpp:1064
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Stel dit in op een niet-nulwaarde om handmatige extrusiebreedte in te "
"stellen. Als die op 0 blijft staan, zal PrusaSlicer de breedte instellen op "
"1,125x de nozzlediameter. Mogelijk wilt u de vulling wat sneller laten "
"printen en het onderdeel sterker maken met deze optie. Als dit is uitgedrukt "
"als percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1074
msgid "Infill before perimeters"
msgstr "Vulling vóór perimeters"

#: src/libslic3r/PrintConfig.cpp:1075
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""
"Deze optie verandert de printvolgorde van perimeters en vulling; de "
"laatstgenoemde eerst."

#: src/libslic3r/PrintConfig.cpp:1080
msgid "Only infill where needed"
msgstr "Alleen vulling waar nodig"

#: src/libslic3r/PrintConfig.cpp:1082
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"Deze optie beperkt de vulling tot gebieden waar dit nodig is voor "
"ondersteuning van bovenvlakken (het fungeert als inwendig support). Let op: "
"deze optie vertraagt de G-code-generatie."

#: src/libslic3r/PrintConfig.cpp:1089
msgid "Infill/perimeters overlap"
msgstr "Overlapping van vulling/perimeters"

#: src/libslic3r/PrintConfig.cpp:1091
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"Deze instelling zorgt voor een extra overlapping tussen vulling en "
"perimeters voor een betere hechting. Theoretisch gezien is dit niet nodig, "
"maar terugslag kan zorgen voor gaten. Als dit is uitgedrukt als percentage, "
"wordt dit berekend over de extrusiebreedte van de perimeters."

#: src/libslic3r/PrintConfig.cpp:1102
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""
"Printsnelheid voor vulling. Als dit ingesteld is op 0, wordt de snelheid "
"automatisch berekend."

#: src/libslic3r/PrintConfig.cpp:1110
msgid "Inherits profile"
msgstr "Afgeleid profiel"

#: src/libslic3r/PrintConfig.cpp:1111
msgid "Name of the profile, from which this profile inherits."
msgstr "Profielnaam waar profiel op is gebaseerd."

#: src/libslic3r/PrintConfig.cpp:1124
msgid "Interface shells"
msgstr "Interfaceshells"

#: src/libslic3r/PrintConfig.cpp:1125
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"Forceer de generatie van dichte shells tussen aangrenzende materialen/"
"volumes. Dit is handig voor multi-extruderprints met transparante materialen "
"of handmatig oplosbaar support."

#: src/libslic3r/PrintConfig.cpp:1133
msgid "Enable ironing"
msgstr "Sta strijken toe"

#: src/libslic3r/PrintConfig.cpp:1134
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""
"Sta strijken van de toplagen toe met het hete hotend voor een gladder "
"oppervlak"

#: src/libslic3r/PrintConfig.cpp:1140 src/libslic3r/PrintConfig.cpp:1142
msgid "Ironing Type"
msgstr "Strijktype"

#: src/libslic3r/PrintConfig.cpp:1154
msgid "Flow rate"
msgstr "Debiet"

#: src/libslic3r/PrintConfig.cpp:1156
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""
"Percentage van het debiet, relatief ten opzichte van de standaard laagdikte "
"van het model."

#: src/libslic3r/PrintConfig.cpp:1164
msgid "Spacing between ironing passes"
msgstr "Ruimte tussen strijkpassages"

#: src/libslic3r/PrintConfig.cpp:1166
msgid "Distance between ironing lines"
msgstr "Afstand tussen strijkpaden"

#: src/libslic3r/PrintConfig.cpp:1183
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"Deze custom code wordt ingevoegd bij elke laagwisseling, direct na de Z-"
"beweging en voor de extruder naar het volgende punt beweegt. Hier kunt u "
"variabelen gebruiken voor alle instellingen zoals 'layer_num' en 'layer_z'."

#: src/libslic3r/PrintConfig.cpp:1194
msgid "Supports remaining times"
msgstr "Ondersteunt resterende tijd"

#: src/libslic3r/PrintConfig.cpp:1195
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"Zet M73 P[geprint percentage] R[resterende tijd in minuten] na elke minuut "
"in de G-code om de firmware de exacte resterende tijd te laten weten. Vanaf "
"nu herkent de Prusa i3 MK3 de M73-commando's. Ook ondersteunt de i3 MK3 "
"firmware M73 Qxx Sxx voor de stille modus."

#: src/libslic3r/PrintConfig.cpp:1203
msgid "Supports stealth mode"
msgstr "Ondersteunt stille modus"

#: src/libslic3r/PrintConfig.cpp:1204
msgid "The firmware supports stealth mode"
msgstr "De firmware ondersteunt stille modus"

#: src/libslic3r/PrintConfig.cpp:1209
msgid "How to apply limits"
msgstr "Hoe limieten toe te voegen"

#: src/libslic3r/PrintConfig.cpp:1210
msgid "Purpose of Machine Limits"
msgstr "Doel van de machinelimieten"

#: src/libslic3r/PrintConfig.cpp:1212
msgid "How to apply the Machine Limits"
msgstr "Hoe machinelimieten toe te voegen"

#: src/libslic3r/PrintConfig.cpp:1217
msgid "Emit to G-code"
msgstr "Uitzenden van de G-code"

#: src/libslic3r/PrintConfig.cpp:1218
msgid "Use for time estimate"
msgstr "Gebruik om tijd te schatten"

#: src/libslic3r/PrintConfig.cpp:1219
msgid "Ignore"
msgstr "Negeer"

#: src/libslic3r/PrintConfig.cpp:1242
msgid "Maximum feedrate X"
msgstr "Maximale voedingssnelheid van de X-as"

#: src/libslic3r/PrintConfig.cpp:1243
msgid "Maximum feedrate Y"
msgstr "Maximale voedingssnelheid van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1244
msgid "Maximum feedrate Z"
msgstr "Maximale voedingssnelheid van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1245
msgid "Maximum feedrate E"
msgstr "Maximale extrusievoedingssnelheid"

#: src/libslic3r/PrintConfig.cpp:1248
msgid "Maximum feedrate of the X axis"
msgstr "Maximale voedingssnelheid van de X-as"

#: src/libslic3r/PrintConfig.cpp:1249
msgid "Maximum feedrate of the Y axis"
msgstr "Maximale voedingssnelheid van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1250
msgid "Maximum feedrate of the Z axis"
msgstr "Maximale voedingssnelheid van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1251
msgid "Maximum feedrate of the E axis"
msgstr "Maximale extrusievoedingssnelheid"

#: src/libslic3r/PrintConfig.cpp:1259
msgid "Maximum acceleration X"
msgstr "Maximale acceleratie X"

#: src/libslic3r/PrintConfig.cpp:1260
msgid "Maximum acceleration Y"
msgstr "Maximale acceleratie Y"

#: src/libslic3r/PrintConfig.cpp:1261
msgid "Maximum acceleration Z"
msgstr "Maximale acceleratie Z"

#: src/libslic3r/PrintConfig.cpp:1262
msgid "Maximum acceleration E"
msgstr "Maximale acceleratie E"

#: src/libslic3r/PrintConfig.cpp:1265
msgid "Maximum acceleration of the X axis"
msgstr "Maximale acceleratie van de X-as"

#: src/libslic3r/PrintConfig.cpp:1266
msgid "Maximum acceleration of the Y axis"
msgstr "Maximale acceleratie van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1267
msgid "Maximum acceleration of the Z axis"
msgstr "Maximale acceleratie van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1268
msgid "Maximum acceleration of the E axis"
msgstr "Maximale extrusie-acceleratie"

#: src/libslic3r/PrintConfig.cpp:1276
msgid "Maximum jerk X"
msgstr "Maximale ruk X"

#: src/libslic3r/PrintConfig.cpp:1277
msgid "Maximum jerk Y"
msgstr "Maximale ruk Y"

#: src/libslic3r/PrintConfig.cpp:1278
msgid "Maximum jerk Z"
msgstr "Maximale ruk Z"

#: src/libslic3r/PrintConfig.cpp:1279
msgid "Maximum jerk E"
msgstr "Maximale ruk E"

#: src/libslic3r/PrintConfig.cpp:1282
msgid "Maximum jerk of the X axis"
msgstr "Maximale ruk van de X-as"

#: src/libslic3r/PrintConfig.cpp:1283
msgid "Maximum jerk of the Y axis"
msgstr "Maximale ruk van de Y-as"

#: src/libslic3r/PrintConfig.cpp:1284
msgid "Maximum jerk of the Z axis"
msgstr "Maximale ruk van de Z-as"

#: src/libslic3r/PrintConfig.cpp:1285
msgid "Maximum jerk of the E axis"
msgstr "Maximale extrusie-ruk"

#: src/libslic3r/PrintConfig.cpp:1295
msgid "Minimum feedrate when extruding"
msgstr "Minimale voedingssnelheid tijdens extruderen"

#: src/libslic3r/PrintConfig.cpp:1297
msgid "Minimum feedrate when extruding (M205 S)"
msgstr "Minimale voedingssnelheid tijdens extruderen (M205 S)"

#: src/libslic3r/PrintConfig.cpp:1305
msgid "Minimum travel feedrate"
msgstr "Minimale voedingssnelheid voor bewegingen"

#: src/libslic3r/PrintConfig.cpp:1307
msgid "Minimum travel feedrate (M205 T)"
msgstr "Minimale voedingssnelheid voor bewegingen (M205 T)"

#: src/libslic3r/PrintConfig.cpp:1315
msgid "Maximum acceleration when extruding"
msgstr "Maximale acceleratie tijdens extruderen"

#: src/libslic3r/PrintConfig.cpp:1317
msgid "Maximum acceleration when extruding (M204 S)"
msgstr "Maximale acceleratie tijdens extruderen (M204 S)"

#: src/libslic3r/PrintConfig.cpp:1325
msgid "Maximum acceleration when retracting"
msgstr "Maximale acceleratie tijdens retracten"

#: src/libslic3r/PrintConfig.cpp:1327
msgid "Maximum acceleration when retracting (M204 T)"
msgstr "Maximale acceleratie tijdens retracten (M204 T)"

#: src/libslic3r/PrintConfig.cpp:1334 src/libslic3r/PrintConfig.cpp:1343
msgid "Max"
msgstr "Max"

#: src/libslic3r/PrintConfig.cpp:1335
msgid "This setting represents the maximum speed of your fan."
msgstr "Deze instelling gaat over de maximale snelheid van uw ventilator."

#: src/libslic3r/PrintConfig.cpp:1344
#, c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"Dit is de hoogst printbare laagdikte voor deze extruder en wordt gebruikt "
"voor de variabele laagdikte en supportlaagdikte. De maximaal aanbevolen "
"laagdikte is 75% van de extrusiebreedte om nog een redelijke laaghechting te "
"krijgen. Als dit ingesteld is op 0, wordt de waarde op 75% van de "
"nozzlediameter genomen."

#: src/libslic3r/PrintConfig.cpp:1354
msgid "Max print speed"
msgstr "Maximale printsnelheid"

#: src/libslic3r/PrintConfig.cpp:1355
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"Als de alle snelheidsinstellingen op 0 staan, berekent PrusaSlicer "
"automatisch de optimale snelheid voor een constante extrusiedruk. Deze "
"experimentele instelling wordt gebruikt voor de hoogste printsnelheid die u "
"toestaat."

#: src/libslic3r/PrintConfig.cpp:1365
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""
"Deze experimentele instelling wordt gebruikt voor de maximale volumetrische "
"snelheid van de extruder."

#: src/libslic3r/PrintConfig.cpp:1374
msgid "Max volumetric slope positive"
msgstr "Maximale volumetrische stijging"

#: src/libslic3r/PrintConfig.cpp:1375 src/libslic3r/PrintConfig.cpp:1386
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"Deze experimentele instelling wordt gebruikt om de snelheidsveranderingen te "
"limiteren. Een waarde van 1.8mm³/s² zorgt voor een extrusieratio van 1.8mm³/"
"s (0,45mm extrusiebreedte, 0,2mm laagdikte, 20mm/s voedingssnelheid) tot "
"5.4mm³/s (60mm/s voedingssnelheid). Dit duurt ten minste 2sec."

#: src/libslic3r/PrintConfig.cpp:1379 src/libslic3r/PrintConfig.cpp:1390
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1385
msgid "Max volumetric slope negative"
msgstr "Maximale volumetrische daling"

#: src/libslic3r/PrintConfig.cpp:1397 src/libslic3r/PrintConfig.cpp:1406
msgid "Min"
msgstr "Min"

#: src/libslic3r/PrintConfig.cpp:1398
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""
"Deze instelling geeft de minimale snelheid van uw ventilator aan waarbij de "
"ventilator draait."

#: src/libslic3r/PrintConfig.cpp:1407
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"Dit is de kleinst printbare laagdikte voor deze extruder en limiteert de "
"resolutie voor variabele laagdikte. Typische waarden zijn tussen 0,05 en 0,1 "
"mm."

#: src/libslic3r/PrintConfig.cpp:1415
msgid "Min print speed"
msgstr "Minimale printsnelheid"

#: src/libslic3r/PrintConfig.cpp:1416
msgid "Slic3r will not scale speed down below this speed."
msgstr ""
"PrusaSlicer zal de printsnelheid niet verlagen tot onder deze snelheid."

#: src/libslic3r/PrintConfig.cpp:1423
msgid "Minimal filament extrusion length"
msgstr "Minimale extrusielengte"

#: src/libslic3r/PrintConfig.cpp:1424
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"Genereer meer dan dit aantal skirtlijnen dat nodig is om de aangegeven "
"hoeveelheid filament op de eerste laag te verbruiken. Voor multi-"
"extruderprinters is dit het minimum voor elke extruder."

#: src/libslic3r/PrintConfig.cpp:1433
msgid "Configuration notes"
msgstr "Configuratie-opmerkingen"

#: src/libslic3r/PrintConfig.cpp:1434
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"Hier kunt u eigen opmerkingen plaatsen. Deze tekst wordt bovenin de G-code "
"toegevoegd."

#: src/libslic3r/PrintConfig.cpp:1444
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "Dit is de diameter van uw extruder-nozzle (bijvoorbeeld 0.4)"

#: src/libslic3r/PrintConfig.cpp:1449
msgid "Host Type"
msgstr "Hosttype"

#: src/libslic3r/PrintConfig.cpp:1450
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"PrusaSlicer kan gcode-bestanden uploaden naar een printerhost. Dit veld moet "
"het type host bevatten."

#: src/libslic3r/PrintConfig.cpp:1467
msgid "Only retract when crossing perimeters"
msgstr "Alleen retracten bij kruisende perimeters"

#: src/libslic3r/PrintConfig.cpp:1468
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"Schakelt retracten uit als de bewegingspaden de perimeters van de bovenste "
"laag niet overschrijdt (en maakt eventueel druipen dus onzichtbaar)."

#: src/libslic3r/PrintConfig.cpp:1475
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""
"Deze optie verlaagt de temperatuur van de inactieve extruders om druipen te "
"voorkomen. Het staat een smalle skirt automatisch toe en beweegt extruders "
"buiten zo'n skirt als de temperatuur verandert."

#: src/libslic3r/PrintConfig.cpp:1482
msgid "Output filename format"
msgstr "Formaat van bestandsnaam"

#: src/libslic3r/PrintConfig.cpp:1483
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"U kunt alle instellingen gebruiken in deze template. U kunt hier ook andere "
"variabelen gebruiken, zoals 'layer_height', 'fill_density', 'timestamp', "
"'year', 'month', 'day', 'hour', 'minute', 'second', 'version', "
"'input_filename', 'input_filename_base', etc."

#: src/libslic3r/PrintConfig.cpp:1492
msgid "Detect bridging perimeters"
msgstr "Detecteer brugperimeters"

#: src/libslic3r/PrintConfig.cpp:1494
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"Experimentele optie om het debiet voor overhanging aan te passen. Het debiet "
"voor bruggen wordt aangehouden, evenals de printsnelheid en de koeling."

#: src/libslic3r/PrintConfig.cpp:1500
msgid "Filament parking position"
msgstr "Filament parkeerpositie"

#: src/libslic3r/PrintConfig.cpp:1501
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""
"Afstand van de nozzlepunt tot de positie waar het filament wordt geparkeerd "
"wanneer dat niet geladen is. Deze moet overeenkomen met de waarde in de "
"firmware."

#: src/libslic3r/PrintConfig.cpp:1509
msgid "Extra loading distance"
msgstr "Extra laadafstand"

#: src/libslic3r/PrintConfig.cpp:1510
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""
"Als dit ingesteld is op 0, zal de afstand die het filament tijdens het laden "
"uit de parkeerpositie even groot zijn als wanneer het filament "
"teruggetrokken wordt. Als de waarde positief is, zal het verder geladen "
"worden. Als het negatief is, is de laadafstand dus korter."

#: src/libslic3r/PrintConfig.cpp:1518 src/libslic3r/PrintConfig.cpp:1536
#: src/libslic3r/PrintConfig.cpp:1549 src/libslic3r/PrintConfig.cpp:1559
msgid "Perimeters"
msgstr "Perimeters"

#: src/libslic3r/PrintConfig.cpp:1519
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""
"Deze acceleratie zal uw printer gebruiken voor perimeters. Als dit ingesteld "
"is op 0, worden acceleratie-instellingen voor perimeters uitgezet."

#: src/libslic3r/PrintConfig.cpp:1527
msgid "Perimeter extruder"
msgstr "Perimeterextruder"

#: src/libslic3r/PrintConfig.cpp:1529
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""
"De extruder die gebruikt wordt voor het printen van perimeters en de brim."

#: src/libslic3r/PrintConfig.cpp:1538
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de perimeters. Dit kan gebruikt worden voor nauwkeurigere details. Als dit "
"op 0 blijft staan, zal PrusaSlicer de breedte instellen op 1,125x de "
"nozzlediameter. Als dit is uitgedrukt als percentage, wordt dit berekend "
"over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1551
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""
"Printnelheid voor de perimeters (contouren, ook wel bekend als verticale "
"shells). Als dit ingesteld is op 0, wordt een automatische snelheid genomen."

#: src/libslic3r/PrintConfig.cpp:1561
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"Instelling voor het te genereren aantal perimeters per laag. PrusaSlicer kan "
"dit aantal verhogen als het schuine vlakken detecteert die gebruik maken van "
"een hoger aantal perimeters als de optie voor extra perimeters is "
"ingeschakeld."

#: src/libslic3r/PrintConfig.cpp:1565
msgid "(minimum)"
msgstr "(minimum)"

#: src/libslic3r/PrintConfig.cpp:1573
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"Als u de output-G-code via custom scripts wilt verwerken, hoeft u alleen de "
"paden hier te plaatsen. Scheid meerdere scripts met een puntkomma. Scripts "
"krijgen als eerste argument het pad naar het gcode-bestand. Ze hebben ook "
"toegang tot de configuratie-instellingen door het lezen van variabelen."

#: src/libslic3r/PrintConfig.cpp:1585
msgid "Printer type"
msgstr "Printertype"

#: src/libslic3r/PrintConfig.cpp:1586
msgid "Type of the printer."
msgstr "Type van de printer."

#: src/libslic3r/PrintConfig.cpp:1591
msgid "Printer notes"
msgstr "Printeropmerkingen"

#: src/libslic3r/PrintConfig.cpp:1592
msgid "You can put your notes regarding the printer here."
msgstr "Hier kunnen opmerkingen over de printer geplaatst worden."

#: src/libslic3r/PrintConfig.cpp:1600
msgid "Printer vendor"
msgstr "Printerleverancier"

#: src/libslic3r/PrintConfig.cpp:1601
msgid "Name of the printer vendor."
msgstr "Naam van de printerleverancier."

#: src/libslic3r/PrintConfig.cpp:1606
msgid "Printer variant"
msgstr "Printervariant"

#: src/libslic3r/PrintConfig.cpp:1607
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""
"Naam van de printervariant. De nozzlediameter kan bijvoorbeeld afwijken voor "
"verschillende varianten."

#: src/libslic3r/PrintConfig.cpp:1620
msgid "Raft layers"
msgstr "Raftlagen"

#: src/libslic3r/PrintConfig.cpp:1622
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""
"Het object wordt verhoogd met dit aantal lagen. Support wordt onder het "
"object gegenereerd."

#: src/libslic3r/PrintConfig.cpp:1630
msgid "Resolution"
msgstr "Resolutie"

#: src/libslic3r/PrintConfig.cpp:1631
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"Minimale resolutie van details. Dit wordt gebruikt om het geïmporteerde "
"bestand sneller te slicen, evenals de grootte van de G-code. Modellen met "
"een hoge resolutie vragen meer van een printer dan mogelijk. Als dit "
"ingesteld is op 0, wordt simplificatie uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:1641
msgid "Minimum travel after retraction"
msgstr "Minimale beweging na retracten"

#: src/libslic3r/PrintConfig.cpp:1642
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""
"Retracten is niet geactiveerd als bewegingen korter zijn dan de hier "
"ingevoerde lengte."

#: src/libslic3r/PrintConfig.cpp:1648
msgid "Retract amount before wipe"
msgstr "Retracthoeveelheid voor het afvegen"

#: src/libslic3r/PrintConfig.cpp:1649
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"Met Bowden-extruders is het verstandig om een aantal maal snel te retracten "
"voor het afvegen."

#: src/libslic3r/PrintConfig.cpp:1656
msgid "Retract on layer change"
msgstr "Retracten bij laagwisselingen"

#: src/libslic3r/PrintConfig.cpp:1657
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "Dit vinkje geeft aan of wordt teruggetrokken bij een Z-beweging."

#: src/libslic3r/PrintConfig.cpp:1662 src/libslic3r/PrintConfig.cpp:1670
msgid "Length"
msgstr "Lengte"

#: src/libslic3r/PrintConfig.cpp:1663
msgid "Retraction Length"
msgstr "Retractielengte"

#: src/libslic3r/PrintConfig.cpp:1664
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"Als retracten is geactiveerd, wordt filament teruggetrokken op de ingestelde "
"waarde (filamentlengte voor het de extruder in gaat)."

#: src/libslic3r/PrintConfig.cpp:1666 src/libslic3r/PrintConfig.cpp:1675
msgid "mm (zero to disable)"
msgstr "mm (stel in op 0 om uit te schakelen)"

#: src/libslic3r/PrintConfig.cpp:1671
msgid "Retraction Length (Toolchange)"
msgstr "Retractielengte (toolwissel)"

#: src/libslic3r/PrintConfig.cpp:1672
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"Als retracten is geactiveerd voor toolwisseling wordt filament "
"teruggetrokken op de ingestelde waarde (filamentlengte voor het de extruder "
"in gaat)."

#: src/libslic3r/PrintConfig.cpp:1680
msgid "Lift Z"
msgstr "Beweeg Z omhoog"

#: src/libslic3r/PrintConfig.cpp:1681
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"Als u dit instelt op een positieve waarde, beweegt de nozzle telkens "
"enigszins omhoog bij het retracten. Als meerdere extruders worden gebruikt, "
"wordt alleen de instelling van de eerste extruder aangehouden."

#: src/libslic3r/PrintConfig.cpp:1688
msgid "Above Z"
msgstr "Boven Z"

#: src/libslic3r/PrintConfig.cpp:1689
msgid "Only lift Z above"
msgstr "Beweeg Z alleen omhoog boven"

#: src/libslic3r/PrintConfig.cpp:1690
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"Als dit ingesteld is op een positieve waarde, zal de nozzle alleen boven de "
"ingestelde waarde omhoog bewegen voor het retracten. Deze kan aangepast "
"worden om warping te voorkomen bij de eerste lagen."

#: src/libslic3r/PrintConfig.cpp:1697
msgid "Below Z"
msgstr "Onder Z"

#: src/libslic3r/PrintConfig.cpp:1698
msgid "Only lift Z below"
msgstr "Beweeg Z alleen omhoog onder"

#: src/libslic3r/PrintConfig.cpp:1699
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"Als dit ingesteld is op een positieve waarde, zal de nozzle alleen onder de "
"ingestelde waarde omhoog bewegen bij het retracten."

#: src/libslic3r/PrintConfig.cpp:1707 src/libslic3r/PrintConfig.cpp:1715
msgid "Extra length on restart"
msgstr "Extra lengte bij een herstart"

#: src/libslic3r/PrintConfig.cpp:1708
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"Als retracten wordt gecompenseerd na een beweging, wordt deze extra "
"hoeveelheid filament geëxtrudeerd. Deze instelling is zelden van toepassing."

#: src/libslic3r/PrintConfig.cpp:1716
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""
"Als retracten wordt gecompenseerd na een toolwisseling, wordt deze extra "
"hoeveelheid filament geëxtrudeerd."

#: src/libslic3r/PrintConfig.cpp:1723 src/libslic3r/PrintConfig.cpp:1724
msgid "Retraction Speed"
msgstr "Retractiesnelheid"

#: src/libslic3r/PrintConfig.cpp:1725
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "De snelheid voor retracties (geldt alleen voor de extrudermotor)."

#: src/libslic3r/PrintConfig.cpp:1731 src/libslic3r/PrintConfig.cpp:1732
msgid "Deretraction Speed"
msgstr "Deretractiesnelheid"

#: src/libslic3r/PrintConfig.cpp:1733
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"De laadsnelheid van filament in de extruder na het retracten (geldt alleen "
"voor de extrudermotor). Als dit ingesteld is op 0, wordt de "
"retractiesnelheid gebruikt."

#: src/libslic3r/PrintConfig.cpp:1740
msgid "Seam position"
msgstr "Naadpositie"

#: src/libslic3r/PrintConfig.cpp:1742
msgid "Position of perimeters starting points."
msgstr "Startpuntpositie van perimeters."

#: src/libslic3r/PrintConfig.cpp:1748
msgid "Random"
msgstr "Willekeurig"

#: src/libslic3r/PrintConfig.cpp:1749
msgid "Nearest"
msgstr "Dichtstbijzijnd"

#: src/libslic3r/PrintConfig.cpp:1750
msgid "Aligned"
msgstr "Uitgelijnd"

#: src/libslic3r/PrintConfig.cpp:1758
msgid "Direction"
msgstr "Richting"

#: src/libslic3r/PrintConfig.cpp:1760
msgid "Preferred direction of the seam"
msgstr "Richtingsvoorkeur voor de naad"

#: src/libslic3r/PrintConfig.cpp:1761
msgid "Seam preferred direction"
msgstr "Richtingsvoorkeur voor de naad"

#: src/libslic3r/PrintConfig.cpp:1768
msgid "Jitter"
msgstr "Jitter"

#: src/libslic3r/PrintConfig.cpp:1770
msgid "Seam preferred direction jitter"
msgstr "Voorkeursrichting voor de naad - jitter"

#: src/libslic3r/PrintConfig.cpp:1771
msgid "Preferred direction of the seam - jitter"
msgstr "Voorkeursrichting voor de naad - jitter"

#: src/libslic3r/PrintConfig.cpp:1778
msgid "Distance from object"
msgstr "Afstand vanaf het object"

#: src/libslic3r/PrintConfig.cpp:1779
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""
"Afstand tussen skirt en object. Als dit ingesteld is op 0, wordt de skirt "
"aan het object vastgemaakt; het fungeert dan als brim."

#: src/libslic3r/PrintConfig.cpp:1786
msgid "Skirt height"
msgstr "Skirthoogte"

#: src/libslic3r/PrintConfig.cpp:1787
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""
"Hoogte van de skirt uitgedrukt in het aantal lagen. Stel in op een hoge "
"waarde om te gebruiken als afscherming tegen tocht."

#: src/libslic3r/PrintConfig.cpp:1794
msgid "Draft shield"
msgstr "Tochtscherm"

#: src/libslic3r/PrintConfig.cpp:1795
msgid ""
"If enabled, the skirt will be as tall as a highest printed object. This is "
"useful to protect an ABS or ASA print from warping and detaching from print "
"bed due to wind draft."
msgstr ""
"Als dit is ingeschakeld zal de skirt zo hoog zijn als het hoogte object. Dit "
"is handig om warping door tocht bij ABS of ASA te voorkomen."

#: src/libslic3r/PrintConfig.cpp:1801
msgid "Loops (minimum)"
msgstr "Rondgangen (minimaal)"

#: src/libslic3r/PrintConfig.cpp:1802
msgid "Skirt Loops"
msgstr "Rondgangen voor de skirt"

#: src/libslic3r/PrintConfig.cpp:1803
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"Het aantal rondgangen van de skirt. Als de minimale extrusielengte is "
"ingesteld kan dit aantal rondgangen groter zijn dan hier is ingesteld. Als "
"dit ingesteld is op 0, wordt de skirt uitgeschakeld."

#: src/libslic3r/PrintConfig.cpp:1811
msgid "Slow down if layer print time is below"
msgstr "Vertraag bij een kortere laagprinttijd dan"

#: src/libslic3r/PrintConfig.cpp:1812
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"Als de laagprinttijd wordt berekend onder dit aantal seconden, wordt de "
"printsnelheid verlaagd om de laagprinttijd te verlengen."

#: src/libslic3r/PrintConfig.cpp:1821
msgid "Small perimeters"
msgstr "Smalle perimeters"

#: src/libslic3r/PrintConfig.cpp:1823
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Deze instelling heeft effect op de snelheid van perimeters met een radius "
"die kleiner of gelijk is aan 6.5mm. Als dit is uitgedrukt als percentage, "
"wordt deze genomen over de snelheid van de perimeters. Als dit ingesteld is "
"op 0, wordt een automatische snelheid genomen."

#: src/libslic3r/PrintConfig.cpp:1833
msgid "Solid infill threshold area"
msgstr "Dichte vulling bij oppervlak"

#: src/libslic3r/PrintConfig.cpp:1835
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""
"Forceer dichte vulling voor delen met een kleiner doorsnee-oppervlak dan de "
"hier ingestelde waarde."

#: src/libslic3r/PrintConfig.cpp:1836
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:1842
msgid "Solid infill extruder"
msgstr "Extruder voor dichte vulling"

#: src/libslic3r/PrintConfig.cpp:1844
msgid "The extruder to use when printing solid infill."
msgstr "De extruder die gebruikt wordt voor het printen van dichte vullingen."

#: src/libslic3r/PrintConfig.cpp:1850
msgid "Solid infill every"
msgstr "Dichte vulling elke"

#: src/libslic3r/PrintConfig.cpp:1852
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"Deze optie staat het genereren van een dichte laag tussen het ingestelde "
"aantal lagen toe. Stel in op 0 om dit uit te schakelen. Stel dit in op een "
"waarde; PrusaSlicer zal dan automatisch het maximaal aantal lagen kiezen om "
"te combineren op basis van de nozzlediameter en de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1864
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de vulling van dichte lagen. Als die op 0 blijft staan, zal PrusaSlicer de "
"breedte instellen op 1,125x de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:1875
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"Printsnelheid van dichte delen. Als dit is uitgedrukt als percentage, wordt "
"dit berekend over de standaard vullingssnelheid. Als dit ingesteld is op 0, "
"worden automatische waarden genomen."

#: src/libslic3r/PrintConfig.cpp:1887
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "Aantal te genereren dichte lagen voor boven- en ondervlakken."

#: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:1894
msgid "Minimum thickness of a top / bottom shell"
msgstr "Minimale dikte van top-/bodemshell"

#: src/libslic3r/PrintConfig.cpp:1900
msgid "Spiral vase"
msgstr "Spiraalmodus"

#: src/libslic3r/PrintConfig.cpp:1901
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""
"Deze optie zorgt dat de Z-as geleidelijk omhoog gaat als een object met een "
"enkele perimeter geprint wordt om een naadlijn te voorkomen. Voor deze optie "
"is een enkele perimeter nodig; vulling, bovenlagen en support zijn niet "
"mogelijk. Bodemlagen zijn wel mogelijk, evenals een skirt en brim. Dit werkt "
"niet bij het printen van meerdere objecten tegelijk."

#: src/libslic3r/PrintConfig.cpp:1909
msgid "Temperature variation"
msgstr "Temperatuurverschil"

#: src/libslic3r/PrintConfig.cpp:1910
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""
"Temperatuurverschil dat wordt toegepast als een extruder niet actief is. Dit "
"genereert een afveegblok waarop de nozzle wordt schoongeveegd."

#: src/libslic3r/PrintConfig.cpp:1920
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""
"Deze startprocedure wordt aan het begin ingevoegd, nadat het bed de gewenste "
"temperatuur heeft bereikt, de extruder is begonnen met verwarmen en de "
"extruder klaar is met verwarmen. Als PrusaSlicer M104 of M190 detecteert in "
"uw custom codes, zullen dergelijke commando's niet automatisch worden "
"voorbereid, zodat u vrij bent om de volgorde van de verwarmingscommando's en "
"andere aangepaste acties aan te passen. Merk op dat u voor alle PrusaSlicer-"
"instellingen variabelen kunt gebruiken."

#: src/libslic3r/PrintConfig.cpp:1935
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""
"Deze startprocedure wordt aan het begin ingevoegd, na een eventuele "
"printerstart G-code (en na een eventuele toolwissel op dit filament in het "
"geval van multi-materialprinters). Dit wordt gebruikt om de instellingen "
"voor een specifieke filament te overschrijven. Als PrusaSlicer M104, M109, "
"M140 of M190 detecteert in de custom codes, zullen dergelijke commando's "
"niet automatisch worden voorgeprogrammeerd, zodat u vrij bent om de volgorde "
"van de verwarmingscommando's en andere aangepaste acties aan te passen. Merk "
"op dat u variabelen kunt gebruiken voor alle PrusaSlicer-instellingen. Als u "
"meerdere extruders hebt, wordt de G-code in de volgorde van de extruders "
"verwerkt."

#: src/libslic3r/PrintConfig.cpp:1951
msgid "Color change G-code"
msgstr "Kleurwissel-G-code"

#: src/libslic3r/PrintConfig.cpp:1952
msgid "This G-code will be used as a code for the color change"
msgstr "Deze G-code wordt gebruikt voor een kleurwisseling"

#: src/libslic3r/PrintConfig.cpp:1961
msgid "This G-code will be used as a code for the pause print"
msgstr "Deze G-code wordt gebruikt bij het pauzeren van de print"

#: src/libslic3r/PrintConfig.cpp:1970
msgid "This G-code will be used as a custom code"
msgstr "Deze G-code wordt gebruikt als custom G-code"

#: src/libslic3r/PrintConfig.cpp:1978
msgid "Single Extruder Multi Material"
msgstr "Multi-material met één extruder"

#: src/libslic3r/PrintConfig.cpp:1979
msgid "The printer multiplexes filaments into a single hot end."
msgstr "De printer mengt filament in een enkele extruder."

#: src/libslic3r/PrintConfig.cpp:1984
msgid "Prime all printing extruders"
msgstr "Veeg alle printextruders af"

#: src/libslic3r/PrintConfig.cpp:1985
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""
"Alle extruders worden afgeveegd aan de voorzijde van het printbed aan het "
"begin van de print als dit aanstaat."

#: src/libslic3r/PrintConfig.cpp:1990
msgid "No sparse layers (EXPERIMENTAL)"
msgstr "Geen smalle lagen (experimenteel)"

#: src/libslic3r/PrintConfig.cpp:1991
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""
"Het afveegblok wordt niet geprint bij lagen zonder toolwisselingen als dit "
"is ingeschakeld. Op lagen met een toolwissel zal de extruder neerwaarts "
"bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele "
"botsingen met de print."

#: src/libslic3r/PrintConfig.cpp:1998
msgid "Generate support material"
msgstr "Genereer support"

#: src/libslic3r/PrintConfig.cpp:2000
msgid "Enable support material generation."
msgstr "Sta de generatie van support toe."

#: src/libslic3r/PrintConfig.cpp:2004
msgid "Auto generated supports"
msgstr "Automatisch gegenereerd support"

#: src/libslic3r/PrintConfig.cpp:2006
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"Support wordt automatisch gegenereerd als dit aan staat. Als dit niet "
"aanstaat zal support alleen bij supportforceringen gegenereerd worden."

#: src/libslic3r/PrintConfig.cpp:2012
msgid "XY separation between an object and its support"
msgstr "Horizontale ruimte tussen het object en het support"

#: src/libslic3r/PrintConfig.cpp:2014
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"Horizontale ruimte tussen object en support. Als dit is uitgedrukt als "
"percentage, wordt deze berekend over de breedte van de buitenste perimeter."

#: src/libslic3r/PrintConfig.cpp:2024
msgid "Pattern angle"
msgstr "Patroonhoek"

#: src/libslic3r/PrintConfig.cpp:2026
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "Gebruik deze instelling om het patroon van het support te draaien."

#: src/libslic3r/PrintConfig.cpp:2036 src/libslic3r/PrintConfig.cpp:2831
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""
"Genereer alleen support als dit op het bed geplaatst wordt, dus niet op de "
"print zelf."

#: src/libslic3r/PrintConfig.cpp:2042
msgid "Contact Z distance"
msgstr "Contact Z-afstand"

#: src/libslic3r/PrintConfig.cpp:2044
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"De afstand tussen objecten en het support. Stel in op 0 om te voorkomen dat "
"PrusaSlicer bruginstellingen gebruikt voor de eerste laag boven het "
"supportdak."

#: src/libslic3r/PrintConfig.cpp:2051
msgid "0 (soluble)"
msgstr "0 (oplosbaar)"

#: src/libslic3r/PrintConfig.cpp:2052
msgid "0.2 (detachable)"
msgstr "0.2 (losbreekbaar)"

#: src/libslic3r/PrintConfig.cpp:2057
msgid "Enforce support for the first"
msgstr "Forceer support voor de eerste"

#: src/libslic3r/PrintConfig.cpp:2059
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"Genereer support voor het ingevoerd aantal lagen, tellend vanaf de bodem, "
"ongeacht de plekken waar standaard support al dan niet is toegestaan, "
"waarbij de ingesteld hoek wordt aangehouden. Dit is handig om meer hechting "
"op het bed te verkrijgen bij objecten met een klein contactoppervlak."

#: src/libslic3r/PrintConfig.cpp:2064
msgid "Enforce support for the first n layers"
msgstr "Forceer support voor de eerste n lagen"

#: src/libslic3r/PrintConfig.cpp:2070
msgid "Support material/raft/skirt extruder"
msgstr "Extruder voor support/raft/skirt"

#: src/libslic3r/PrintConfig.cpp:2072
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"De extruder die gebruikt wordt voor support, raft en skirt (stel in op 1 of "
"op 0 om de huidige extruder te gebruiken)."

#: src/libslic3r/PrintConfig.cpp:2081
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"het support. Als die op 0 blijft staan, zal PrusaSlicer de breedte instellen "
"zelf bepalen op basis van de nozzlediameter. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:2090
msgid "Interface loops"
msgstr "Interface rondgangen"

#: src/libslic3r/PrintConfig.cpp:2092
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""
"Bedek de bovenste interfacelagen van het support met rondgangen. Dit staat "
"standaard uit."

#: src/libslic3r/PrintConfig.cpp:2097
msgid "Support material/raft interface extruder"
msgstr "Extruder voor supportdak en de bovenlaag van de raft"

#: src/libslic3r/PrintConfig.cpp:2099
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"De extruder die gebruikt wordt voor de supportinterface (stel in op hoger "
"dan 1 of op 0 om de huidige extruder te gebruiken voor minder "
"toolwisselingen). Dit heeft ook effect op de raft."

#: src/libslic3r/PrintConfig.cpp:2106
msgid "Interface layers"
msgstr "Supportinterface-lagen"

#: src/libslic3r/PrintConfig.cpp:2108
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr "Aantal interface-lagen tussen het support en het object."

#: src/libslic3r/PrintConfig.cpp:2115
msgid "Interface pattern spacing"
msgstr "Tussenafstand voor interface"

#: src/libslic3r/PrintConfig.cpp:2117
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""
"Ruimte tussen lijnen van supportinterface. Als dit ingesteld is op 0, wordt "
"een dichte supportinterface gegenereerd."

#: src/libslic3r/PrintConfig.cpp:2126
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"Printsnelheid van supportinterface-lagen. Als dit is uitgedrukt als "
"percentage, wordt dit berekend over de snelheid van het support."

#: src/libslic3r/PrintConfig.cpp:2135
msgid "Pattern"
msgstr "Patroon"

#: src/libslic3r/PrintConfig.cpp:2137
msgid "Pattern used to generate support material."
msgstr "Patroon dat gebruikt wordt voor het support."

#: src/libslic3r/PrintConfig.cpp:2143
msgid "Rectilinear grid"
msgstr "Rechtlijnig raster"

#: src/libslic3r/PrintConfig.cpp:2149
msgid "Pattern spacing"
msgstr "Tussenafstand van het patroon"

#: src/libslic3r/PrintConfig.cpp:2151
msgid "Spacing between support material lines."
msgstr "Afstand tussen supportlijnen."

#: src/libslic3r/PrintConfig.cpp:2160
msgid "Speed for printing support material."
msgstr "Printsnelheid voor support."

#: src/libslic3r/PrintConfig.cpp:2167
msgid "Synchronize with object layers"
msgstr "Synchroniseer met objectlagen"

#: src/libslic3r/PrintConfig.cpp:2169
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""
"Synchroniseer de supportlagen met de objectlagen. Dit is handig voor multi-"
"materialprinters waar een toolwissel duur is."

#: src/libslic3r/PrintConfig.cpp:2175
msgid "Overhang threshold"
msgstr "Maximale overhanghoek"

#: src/libslic3r/PrintConfig.cpp:2177
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"Support wordt niet gegenereerd als de overhanghoek boven de gegeven waarde "
"ligt. In andere woorden; deze waarde geeft de hoek met het bed aan die "
"geprint moet worden met support. Als dit ingesteld is op 0, wordt dit "
"automatisch gedetecteerd (aanbevolen)."

#: src/libslic3r/PrintConfig.cpp:2189
msgid "With sheath around the support"
msgstr "Met schild rond het support"

#: src/libslic3r/PrintConfig.cpp:2191
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"Voeg een schild (één perimeterlijn) rondom het support toe. Dit maakt het "
"support betrouwbaarder maar ook moeilijker te verwijderen."

#: src/libslic3r/PrintConfig.cpp:2198
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""
"Nozzletemperatuur voor lagen na de eerste laag. Stel in op 0 om "
"temperatuurregeling uit te zetten in de G-code."

#: src/libslic3r/PrintConfig.cpp:2201
msgid "Nozzle temperature"
msgstr "Nozzletemperatuur"

#: src/libslic3r/PrintConfig.cpp:2207
msgid "Detect thin walls"
msgstr "Detecteer dunne wanden"

#: src/libslic3r/PrintConfig.cpp:2209
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"Detecteer éénlijnige wanden (delen waar 2 extrusielijnen niet passen en dit "
"geprint moet worden met 1 lijn)."

#: src/libslic3r/PrintConfig.cpp:2215
msgid "Threads"
msgstr "Meerdere processen"

#: src/libslic3r/PrintConfig.cpp:2216
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""
"Meerdere processen worden gebruikt om langdurige commando's parallel te "
"draaien. Het optimaal aantal processen is vlak boven het aanwezige aantal "
"kernen/processoren."

#: src/libslic3r/PrintConfig.cpp:2228
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {previous_extruder} and "
"{next_extruder} can be used. When a tool-changing command which changes to "
"the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""
"Deze custom code wordt ingevoegd voor elke toolwissel. Zowel variabelen van "
"alle PrusaSlicer-instellingen als 'previous_extruder' en 'next_extruder' "
"kunnen gebruikt worden. Als een toolwissel-commando (bijvoorbeeld "
"'T[next_extruder]') is ingevoegd, zal PrusaSlicer niet nog een dergelijk "
"commando invoegen. Het is daarom mogelijk om voor én na de toolwissel een "
"custom script te draaien."

#: src/libslic3r/PrintConfig.cpp:2241
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"Stel in op een niet-nulwaarde om te werken met manuele extrusiebreedte voor "
"de vulling van bovenvlakken. Dit kan gebruikt worden voor een dunner "
"extrudaat in smalle gebieden voor een gladdere afwerking. Als dit is "
"uitgedrukt als percentage, wordt dit berekend over de laagdikte."

#: src/libslic3r/PrintConfig.cpp:2253
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"Printsnelheid voor dichte toplagen (alleen de buitenste zichtbare laag). Als "
"deze waarde lager wordt gezet, resulteert dit in een gladder oppervlak. Als "
"dit is uitgedrukt als percentage, wordt dit berekend over de "
"vullingssnelheid. Als dit ingesteld is op 0, wordt een automatische snelheid "
"genomen."

#: src/libslic3r/PrintConfig.cpp:2268
msgid "Number of solid layers to generate on top surfaces."
msgstr "Aantal te genereren dichte lagen voor bovenvlakken."

#: src/libslic3r/PrintConfig.cpp:2269
msgid "Top solid layers"
msgstr "Bovenste dichte vulling"

#: src/libslic3r/PrintConfig.cpp:2277
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""
"Het aantal dichte bovenlagen wordt verhoogd als blijkt dat dit nodig is om "
"de minimale shelldikte te garanderen. Dit is handig om kussenvorming te "
"voorkomen bij het printen met variabele laagdikte."

#: src/libslic3r/PrintConfig.cpp:2280
msgid "Minimum top shell thickness"
msgstr "Minimale shelldikte aan de bovenzijde"

#: src/libslic3r/PrintConfig.cpp:2287
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "Bewegingssnelheid als niet geëxtrudeerd wordt."

#: src/libslic3r/PrintConfig.cpp:2295
msgid "Use firmware retraction"
msgstr "Gebruik de firmware-retractie"

#: src/libslic3r/PrintConfig.cpp:2296
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"Deze experimentele instelling gebruikt G10 en G11 commando's voor het "
"retracten in de firmware. Dit wordt alleen ondersteunt bij de recente Marlin-"
"variant."

#: src/libslic3r/PrintConfig.cpp:2302
msgid "Use relative E distances"
msgstr "Gebruik relatieve E-waarden"

#: src/libslic3r/PrintConfig.cpp:2303
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"Als uw firmware relatieve extrusiewaarden nodig heeft, vink dit dan aan. "
"Laat het ander uit staan. De meeste firmware gebruiken absolute waarden."

#: src/libslic3r/PrintConfig.cpp:2309
msgid "Use volumetric E"
msgstr "Gebruik volumetrische E-waarden"

#: src/libslic3r/PrintConfig.cpp:2310
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"Deze experimentele instelling gebruikt E-waarden in kubieke millimeters in "
"plaats van lineaire millimeters. Als uw firmware nog niet weet wat de "
"filamentdiameter is, kunt u een commando zoals 'M200 D[filament_diameter_0] "
"T0' in de start G-code invoegen om de volumetrische modus te gebruiken. Deze "
"variabele gebruikt de filamentdiameter zoals ingevoerd bij de "
"filamentinstellingen. Dit wordt alleen ondersteund in de recente Marlin-"
"variant."

#: src/libslic3r/PrintConfig.cpp:2320
msgid "Enable variable layer height feature"
msgstr "Variabele laagdikte toestaan"

#: src/libslic3r/PrintConfig.cpp:2321
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"Sommige printers of printersetups kunnen niet printen met een variabele "
"laagdikte. Staat standaard aan."

#: src/libslic3r/PrintConfig.cpp:2327
msgid "Wipe while retracting"
msgstr "Veeg af bij het retracten"

#: src/libslic3r/PrintConfig.cpp:2328
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"Als u dit aanvinkt beweegt de nozzle tijdens het retracten om een blob of "
"lekkende extruders tegen te gaan."

#: src/libslic3r/PrintConfig.cpp:2335
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"Multi-materialprinters moeten afvegen bij toolwisselingen. Extrudeer het "
"overtollige materiaal op het afveegblok."

#: src/libslic3r/PrintConfig.cpp:2341
msgid "Purging volumes - load/unload volumes"
msgstr "Afveegvolume - laad/ontlaad volumes"

#: src/libslic3r/PrintConfig.cpp:2342
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""
"Deze vector bespaart de benodigde volumes om van/naar elke extruder dat op "
"het afveegblok wordt gebruikt te wisselen. Deze waarden worden gebruikt om "
"het creëren van de onderstaande volledige reinigingsvolumes te "
"vereenvoudigen."

#: src/libslic3r/PrintConfig.cpp:2348
msgid "Purging volumes - matrix"
msgstr "Afveegvolume - matrix"

#: src/libslic3r/PrintConfig.cpp:2349
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""
"Deze matrix beschrijft volume (in mm³) dat is vereist om nieuw filament af "
"te vegen aan het afveegblok voor elk paar van extruders."

#: src/libslic3r/PrintConfig.cpp:2358
msgid "Position X"
msgstr "X-positie"

#: src/libslic3r/PrintConfig.cpp:2359
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "X-coördinaat van de linkervoorhoek van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2365
msgid "Position Y"
msgstr "Y-positie"

#: src/libslic3r/PrintConfig.cpp:2366
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "Y-coördinaat van de linkervoorhoek van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2373
msgid "Width of a wipe tower"
msgstr "Breedte van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2379
msgid "Wipe tower rotation angle"
msgstr "Rotatie van het afveegblok"

#: src/libslic3r/PrintConfig.cpp:2380
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr "Rotatie van het afveegblok ten opzichte van de X-as."

#: src/libslic3r/PrintConfig.cpp:2387
msgid "Wipe into this object's infill"
msgstr "Afvegen in de vulling van het object"

#: src/libslic3r/PrintConfig.cpp:2388
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""
"Het afvegen na de toolwissel wordt gedaan in de vulling van het object. Dit "
"reduceert de hoeveelheid afval, maar kan leiden tot een langere printtijd."

#: src/libslic3r/PrintConfig.cpp:2395
msgid "Wipe into this object"
msgstr "Afvegen in dit object"

#: src/libslic3r/PrintConfig.cpp:2396
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"Het object wordt gebruikt om de nozzle af te vegen bij een toolwissel om "
"materiaal dat anders in het afveegblok gebruikt wordt te besparen. Kleuren "
"kunnen dan gemengd worden."

#: src/libslic3r/PrintConfig.cpp:2402
msgid "Maximal bridging distance"
msgstr "Maximale brugafstand"

#: src/libslic3r/PrintConfig.cpp:2403
msgid "Maximal distance between supports on sparse infill sections."
msgstr "Maximale afstand tussen support op dunne vullingsdelen."

#: src/libslic3r/PrintConfig.cpp:2409
msgid "XY Size Compensation"
msgstr "Compensatie voor X- en Y-grootte"

#: src/libslic3r/PrintConfig.cpp:2411
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"Het object wordt in horizontale richting verbreed/versmald in de ingestelde "
"waarde (negatief = naar binnen, positief = naar buiten). Dit kan handig zijn "
"voor het verfijnen van gaten."

#: src/libslic3r/PrintConfig.cpp:2419
msgid "Z offset"
msgstr "Z-hoogte"

#: src/libslic3r/PrintConfig.cpp:2420
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"Deze waarde wordt toegevoegd (of afgetrokken) van alle Z-coördinaten in de G-"
"code. Het wordt gebruikt voor een slechte Z-eindstop positie. Als de Z-"
"eindstop bijvoorbeeld een waarde gebruikt die 0.3mm van het printbed is, kan "
"dit ingesteld worden op -0.3mm."

#: src/libslic3r/PrintConfig.cpp:2487
msgid "Display width"
msgstr "Schermbreedte"

#: src/libslic3r/PrintConfig.cpp:2488
msgid "Width of the display"
msgstr "Breedte van het scherm"

#: src/libslic3r/PrintConfig.cpp:2493
msgid "Display height"
msgstr "Schermhoogte"

#: src/libslic3r/PrintConfig.cpp:2494
msgid "Height of the display"
msgstr "Hoogte van het scherm"

#: src/libslic3r/PrintConfig.cpp:2499
msgid "Number of pixels in"
msgstr "Aantal pixels"

#: src/libslic3r/PrintConfig.cpp:2501
msgid "Number of pixels in X"
msgstr "Aantal pixels in de breedte"

#: src/libslic3r/PrintConfig.cpp:2507
msgid "Number of pixels in Y"
msgstr "Aantal pixels in de hoogte"

#: src/libslic3r/PrintConfig.cpp:2512
msgid "Display horizontal mirroring"
msgstr "Scherm horizontaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2513
msgid "Mirror horizontally"
msgstr "Spiegel horizontaal"

#: src/libslic3r/PrintConfig.cpp:2514
msgid "Enable horizontal mirroring of output images"
msgstr "Horizontaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2519
msgid "Display vertical mirroring"
msgstr "Scherm verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2520
msgid "Mirror vertically"
msgstr "Verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2521
msgid "Enable vertical mirroring of output images"
msgstr "Verticaal spiegelen"

#: src/libslic3r/PrintConfig.cpp:2526
msgid "Display orientation"
msgstr "Schermoriëntatie"

#: src/libslic3r/PrintConfig.cpp:2527
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"Stel de werkelijke oriëntatie van het LCD-scherm van de SLA-printer in. "
"Staande modus zal de breedte- en hoogteparameters omwisselen en de output "
"wordt 90 graden gedraaid."

#: src/libslic3r/PrintConfig.cpp:2533
msgid "Landscape"
msgstr "Liggend"

#: src/libslic3r/PrintConfig.cpp:2534
msgid "Portrait"
msgstr "Staand"

#: src/libslic3r/PrintConfig.cpp:2539
msgid "Fast"
msgstr "Snel"

#: src/libslic3r/PrintConfig.cpp:2540
msgid "Fast tilt"
msgstr "Snelle draaiing"

#: src/libslic3r/PrintConfig.cpp:2541
msgid "Time of the fast tilt"
msgstr "Tijd van de snelle draaiing"

#: src/libslic3r/PrintConfig.cpp:2548
msgid "Slow"
msgstr "Langzaam"

#: src/libslic3r/PrintConfig.cpp:2549
msgid "Slow tilt"
msgstr "Langzaam draaien"

#: src/libslic3r/PrintConfig.cpp:2550
msgid "Time of the slow tilt"
msgstr "Tijd van de langzame draaiing"

#: src/libslic3r/PrintConfig.cpp:2557
msgid "Area fill"
msgstr "Vulgebied"

#: src/libslic3r/PrintConfig.cpp:2558
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"Percentage van het printbed. \n"
"Als het printgebied buiten een specifieke waarde valt \n"
"wordt een korte draaiing gebruikt, anders een snelle"

#: src/libslic3r/PrintConfig.cpp:2565 src/libslic3r/PrintConfig.cpp:2566
#: src/libslic3r/PrintConfig.cpp:2567
msgid "Printer scaling correction"
msgstr "Verschalingscorrectie voor printer"

#: src/libslic3r/PrintConfig.cpp:2573 src/libslic3r/PrintConfig.cpp:2574
msgid "Printer absolute correction"
msgstr "Absolute correctie voor printer"

#: src/libslic3r/PrintConfig.cpp:2575
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""
"Zal de geslicede veelhoeken uitrekken of laten krimpen, afhankelijk van de "
"correctiewaarde."

#: src/libslic3r/PrintConfig.cpp:2581
msgid "Elephant foot minimum width"
msgstr "Squish-compensatiebreedte"

#: src/libslic3r/PrintConfig.cpp:2583
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr "Minimale breedte van delen waarop squish-compensatie wordt toegepast."

#: src/libslic3r/PrintConfig.cpp:2590 src/libslic3r/PrintConfig.cpp:2591
msgid "Printer gamma correction"
msgstr "Gammacorrectie voor printer"

#: src/libslic3r/PrintConfig.cpp:2592
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""
"Dit zorgt voor een gammacorrectie voor de veelhoeken. Een gammawaarde van 0 "
"betekent een waarde die in het midden ligt. Dit gedrag elimineert anti-"
"aliasing zonder dat gaten in de veelhoeken verloren gaan."

#: src/libslic3r/PrintConfig.cpp:2604 src/libslic3r/PrintConfig.cpp:2605
msgid "SLA material type"
msgstr "SLA-materiaaltype"

#: src/libslic3r/PrintConfig.cpp:2616 src/libslic3r/PrintConfig.cpp:2617
msgid "Initial layer height"
msgstr "Laagdikte eerste laag"

#: src/libslic3r/PrintConfig.cpp:2623 src/libslic3r/PrintConfig.cpp:2624
msgid "Bottle volume"
msgstr "Flesinhoud (volume)"

#: src/libslic3r/PrintConfig.cpp:2625
msgid "ml"
msgstr "ml"

#: src/libslic3r/PrintConfig.cpp:2630 src/libslic3r/PrintConfig.cpp:2631
msgid "Bottle weight"
msgstr "Flesinhoud (gewicht)"

#: src/libslic3r/PrintConfig.cpp:2632
msgid "kg"
msgstr "kg"

#: src/libslic3r/PrintConfig.cpp:2639
msgid "g/ml"
msgstr "g/ml"

#: src/libslic3r/PrintConfig.cpp:2646
msgid "money/bottle"
msgstr "€/fles"

#: src/libslic3r/PrintConfig.cpp:2651
msgid "Faded layers"
msgstr "Transitielagen"

#: src/libslic3r/PrintConfig.cpp:2652
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""
"Aantal lagen waarin de initiële belichtingstijd stapsgewijs wordt "
"teruggebracht naar de standaard belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2659 src/libslic3r/PrintConfig.cpp:2660
msgid "Minimum exposure time"
msgstr "Minimale belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2668
msgid "Maximum exposure time"
msgstr "Maximale belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:2676
msgid "Exposure time"
msgstr "Belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2682 src/libslic3r/PrintConfig.cpp:2683
msgid "Minimum initial exposure time"
msgstr "Minimale initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2690 src/libslic3r/PrintConfig.cpp:2691
msgid "Maximum initial exposure time"
msgstr "Maximale initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2699
msgid "Initial exposure time"
msgstr "Initiële belichtingstijd"

#: src/libslic3r/PrintConfig.cpp:2705 src/libslic3r/PrintConfig.cpp:2706
msgid "Correction for expansion"
msgstr "Vergrotingscorrectie"

#: src/libslic3r/PrintConfig.cpp:2712
msgid "SLA print material notes"
msgstr "SLA-printmateriaal opmerkingen"

#: src/libslic3r/PrintConfig.cpp:2713
msgid "You can put your notes regarding the SLA print material here."
msgstr "U kunt hier opmerkingen plaatsen wat betreft het SLA-materiaal."

#: src/libslic3r/PrintConfig.cpp:2725 src/libslic3r/PrintConfig.cpp:2736
msgid "Default SLA material profile"
msgstr "Standaard SLA-materiaalprofiel"

#: src/libslic3r/PrintConfig.cpp:2747
msgid "Generate supports"
msgstr "Genereer support"

#: src/libslic3r/PrintConfig.cpp:2749
msgid "Generate supports for the models"
msgstr "Genereer support voor de modellen"

#: src/libslic3r/PrintConfig.cpp:2754
msgid "Pinhead front diameter"
msgstr "Diameter voorzijde pinkop"

#: src/libslic3r/PrintConfig.cpp:2756
msgid "Diameter of the pointing side of the head"
msgstr "Diameter van de puntige zijde van de kop"

#: src/libslic3r/PrintConfig.cpp:2763
msgid "Head penetration"
msgstr "Koppenetratie"

#: src/libslic3r/PrintConfig.cpp:2765
msgid "How much the pinhead has to penetrate the model surface"
msgstr "Hoe ver de supportkop in het model moet steken"

#: src/libslic3r/PrintConfig.cpp:2772
msgid "Pinhead width"
msgstr "Pinkopbreedte"

#: src/libslic3r/PrintConfig.cpp:2774
msgid "Width from the back sphere center to the front sphere center"
msgstr "Centerafstand van de achterste tot de voorste bol"

#: src/libslic3r/PrintConfig.cpp:2782
msgid "Pillar diameter"
msgstr "Pijlerdiameter"

#: src/libslic3r/PrintConfig.cpp:2784
msgid "Diameter in mm of the support pillars"
msgstr "Diameter van de supportpijlers (in mm)"

#: src/libslic3r/PrintConfig.cpp:2792
msgid "Small pillar diameter percent"
msgstr "Percentage van smalle pijlerdiameter"

#: src/libslic3r/PrintConfig.cpp:2794
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""
"Het percentage van smallere pijlers vergeleken met normale pijlerdiameters "
"die worden gebruikt in moeilijk te bereiken plekken."

#: src/libslic3r/PrintConfig.cpp:2803
msgid "Max bridges on a pillar"
msgstr "Maximaal aantal bruggen op een pijler"

#: src/libslic3r/PrintConfig.cpp:2805
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""
"Maximaal aantal bruggen dat op een pijler geplaatst kan worden. Bruggen "
"houden supportpuntkop bij elkaar en verbinden pijlers as smalle takken."

#: src/libslic3r/PrintConfig.cpp:2813
msgid "Pillar connection mode"
msgstr "Pijlerverbindingsmodus"

#: src/libslic3r/PrintConfig.cpp:2814
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"Geeft het type brug tussen twee aangrenzende pijlers aan. Dit kan zigzag, "
"kruisend (dubbele zigzag) of dynamisch zijn. Dynamisch houdt in dat wordt "
"geschakeld tussen de eerste twee, afhankelijk van de pijlerafstand."

#: src/libslic3r/PrintConfig.cpp:2822
msgid "Zig-Zag"
msgstr "Zigzag"

#: src/libslic3r/PrintConfig.cpp:2823
msgid "Cross"
msgstr "Kruisend"

#: src/libslic3r/PrintConfig.cpp:2824
msgid "Dynamic"
msgstr "Dynamisch"

#: src/libslic3r/PrintConfig.cpp:2836
msgid "Pillar widening factor"
msgstr "Pijlervergrotingsfactor"

#: src/libslic3r/PrintConfig.cpp:2838
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""
"Bruggen of pijlers samenvoegen met andere pijlers kan de radius vergroten. 0 "
"betekent geen vergroting, 1 betekent volle vergroting."

#: src/libslic3r/PrintConfig.cpp:2847
msgid "Support base diameter"
msgstr "Supportbasis - diameter"

#: src/libslic3r/PrintConfig.cpp:2849
msgid "Diameter in mm of the pillar base"
msgstr "Diameter van de pijlerbasis (in mm)"

#: src/libslic3r/PrintConfig.cpp:2857
msgid "Support base height"
msgstr "Supportbasis - hoogte"

#: src/libslic3r/PrintConfig.cpp:2859
msgid "The height of the pillar base cone"
msgstr "Hoogte van de pijlerbasiskegel"

#: src/libslic3r/PrintConfig.cpp:2866
msgid "Support base safety distance"
msgstr "Supportbasis - veilige afstand"

#: src/libslic3r/PrintConfig.cpp:2869
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""
"Minimale afstand tussen pijlerbasis en model (in mm). Dit is handig bij de "
"modus zonder verhoging waar een gat volgens deze parameter wordt ingevoegd "
"tussen het model en de basisplaat."

#: src/libslic3r/PrintConfig.cpp:2879
msgid "Critical angle"
msgstr "Kritische hoek"

#: src/libslic3r/PrintConfig.cpp:2881
msgid "The default angle for connecting support sticks and junctions."
msgstr "De standaardhoek voor de verbinding van supporttakken en kruisingen."

#: src/libslic3r/PrintConfig.cpp:2889
msgid "Max bridge length"
msgstr "Maximale bruglengte"

#: src/libslic3r/PrintConfig.cpp:2891
msgid "The max length of a bridge"
msgstr "Maximale bruglengte"

#: src/libslic3r/PrintConfig.cpp:2898
msgid "Max pillar linking distance"
msgstr "Maximale pijler-verbindafstand"

#: src/libslic3r/PrintConfig.cpp:2900
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""
"Maximale verbindingsafstand van twee pijlers. Een waarde van 0 schakelt aan "
"elkaar verbonden pijlers uit."

#: src/libslic3r/PrintConfig.cpp:2910
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""
"Hoe veel het support omhoog moet bewegen op het ondersteunde object. Als "
"'Basisplaat rondom object' is ingeschakeld wordt deze waarde genegeerd."

#: src/libslic3r/PrintConfig.cpp:2921
msgid "This is a relative measure of support points density."
msgstr "Relatieve waarde van de dichtheid van supportpunten."

#: src/libslic3r/PrintConfig.cpp:2927
msgid "Minimal distance of the support points"
msgstr "Minimale supportpuntafstand"

#: src/libslic3r/PrintConfig.cpp:2929
msgid "No support points will be placed closer than this threshold."
msgstr "Minimale afstand tussen supportpunten."

#: src/libslic3r/PrintConfig.cpp:2935
msgid "Use pad"
msgstr "Gebruik basisplaat"

#: src/libslic3r/PrintConfig.cpp:2937
msgid "Add a pad underneath the supported model"
msgstr "Voeg een basisplaat toe onder het model met support"

#: src/libslic3r/PrintConfig.cpp:2942
msgid "Pad wall thickness"
msgstr "Basisplaat - wanddikte"

#: src/libslic3r/PrintConfig.cpp:2944
msgid "The thickness of the pad and its optional cavity walls."
msgstr "Dikte van de basisplaat en optionele wanden."

#: src/libslic3r/PrintConfig.cpp:2952
msgid "Pad wall height"
msgstr "Basisplaat - wandhoogte"

#: src/libslic3r/PrintConfig.cpp:2953
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""
"Geeft de basisplaat-wandhoogte aan. Als dit ingesteld is op 0, wordt dit "
"uitgeschakeld. Wees voorzichtig met het aanzetten van deze optie, omdat "
"sommige resins een sterk zuigeffect in de holte produceren, wat het afpellen "
"van de print van het folie lastig kan maken."

#: src/libslic3r/PrintConfig.cpp:2966
msgid "Pad brim size"
msgstr "Basisplaat - expansie"

#: src/libslic3r/PrintConfig.cpp:2967
msgid "How far should the pad extend around the contained geometry"
msgstr "Hoe ver de basisplaat moet uitsteken buiten de geometrie"

#: src/libslic3r/PrintConfig.cpp:2977
msgid "Max merge distance"
msgstr "Maximale combineerafstand"

#: src/libslic3r/PrintConfig.cpp:2979
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"Sommige objecten werken beter met een aantal kleinere basisplaten in plaats "
"van één grote. Deze parameter bepaalt hoe ver de tussenafstand van de "
"kleinere basisplaten mogen zijn."

#: src/libslic3r/PrintConfig.cpp:2999
msgid "Pad wall slope"
msgstr "Basisplaat - zijhoek"

#: src/libslic3r/PrintConfig.cpp:3001
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""
"Hoek van de basisplaatzijde ten opzichte van het bed. 90 graden betekent een "
"rechte zijkant."

#: src/libslic3r/PrintConfig.cpp:3012
msgid "Create pad around object and ignore the support elevation"
msgstr "Genereer basisplaat rondom object en schakel objectverhoging uit"

#: src/libslic3r/PrintConfig.cpp:3017
msgid "Pad around object everywhere"
msgstr "Overal basisplaat rondom object"

#: src/libslic3r/PrintConfig.cpp:3019
msgid "Force pad around object everywhere"
msgstr "Forceer basisplaat overal rondom het object"

#: src/libslic3r/PrintConfig.cpp:3024
msgid "Pad object gap"
msgstr "Basisplaat - gat"

#: src/libslic3r/PrintConfig.cpp:3026
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""
"Het gat tussen de onderkant van het object en de gegenereerde basisplaat in "
"de modus zonder verhoging."

#: src/libslic3r/PrintConfig.cpp:3035
msgid "Pad object connector stride"
msgstr "Basisplaat - verbindingstakafstand"

#: src/libslic3r/PrintConfig.cpp:3037
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""
"Afstand tussen twee verbindingstakken die het object verbinden aan de "
"basisplaat."

#: src/libslic3r/PrintConfig.cpp:3044
msgid "Pad object connector width"
msgstr "Basisplaat - verbindingstakbreedte"

#: src/libslic3r/PrintConfig.cpp:3046
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""
"Breedte van de verbindingstakken die het object en de basisplaat met elkaar "
"verbinden."

#: src/libslic3r/PrintConfig.cpp:3053
msgid "Pad object connector penetration"
msgstr "Basisplaat - Verbindingstakinsteek"

#: src/libslic3r/PrintConfig.cpp:3056
msgid "How much should the tiny connectors penetrate into the model body."
msgstr "Hoe ver de verbindingstakken in het model steken."

#: src/libslic3r/PrintConfig.cpp:3063
msgid "Enable hollowing"
msgstr "Uithollen toestaan"

#: src/libslic3r/PrintConfig.cpp:3065
msgid "Hollow out a model to have an empty interior"
msgstr "Hol een model uit voor een leeg binnenste"

#: src/libslic3r/PrintConfig.cpp:3070
msgid "Wall thickness"
msgstr "Wanddikte"

#: src/libslic3r/PrintConfig.cpp:3072
msgid "Minimum wall thickness of a hollowed model."
msgstr "Minimale wanddikte van een uitgehold model."

#: src/libslic3r/PrintConfig.cpp:3080
msgid "Accuracy"
msgstr "Nauwkeurigheid"

#: src/libslic3r/PrintConfig.cpp:3082
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""
"Prestatie tegenover nauwkeurigheid van berekenen. Lagere waarde kunnen "
"ongewenste artefacten produceren."

#: src/libslic3r/PrintConfig.cpp:3092
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""
"Uithollen voltooid in twee stappen: eerst is een denkbeeldig binnenste in "
"het model berekend (wanddikte + sluitafstand). Daarna is het opgeblazen, "
"terug naar de aangegeven wanddikte. Een grotere sluitafstand maakt het "
"binnenste ronder. Bij een waarde van 0 is het binnenste vrijwel gelijk aan "
"de buitenzijde."

#: src/libslic3r/PrintConfig.cpp:3505
msgid "Export OBJ"
msgstr "Exporteer OBJ"

#: src/libslic3r/PrintConfig.cpp:3506
msgid "Export the model(s) as OBJ."
msgstr "Exporteer de modellen als OBJ-bestand."

#: src/libslic3r/PrintConfig.cpp:3517
msgid "Export SLA"
msgstr "Exporteer SLA"

#: src/libslic3r/PrintConfig.cpp:3518
msgid "Slice the model and export SLA printing layers as PNG."
msgstr "Slice het model en exporteer SLA-printlagen als PNG-bestanden."

#: src/libslic3r/PrintConfig.cpp:3523
msgid "Export 3MF"
msgstr "Exporteer 3MF"

#: src/libslic3r/PrintConfig.cpp:3524
msgid "Export the model(s) as 3MF."
msgstr "Exporteer de modellen als 3MF-bestanden."

#: src/libslic3r/PrintConfig.cpp:3528
msgid "Export AMF"
msgstr "Exporteer AMF"

#: src/libslic3r/PrintConfig.cpp:3529
msgid "Export the model(s) as AMF."
msgstr "Exporteer de modellen als AMF-bestanden."

#: src/libslic3r/PrintConfig.cpp:3533
msgid "Export STL"
msgstr "Exporteer STL"

#: src/libslic3r/PrintConfig.cpp:3534
msgid "Export the model(s) as STL."
msgstr "Exporteer de modellen als STL-bestand."

#: src/libslic3r/PrintConfig.cpp:3539
msgid "Slice the model and export toolpaths as G-code."
msgstr "Slice het model en exporteer de paden als G-code-bestand."

#: src/libslic3r/PrintConfig.cpp:3544
msgid "G-code viewer"
msgstr "G-code weergave"

#: src/libslic3r/PrintConfig.cpp:3545
msgid "Visualize an already sliced and saved G-code"
msgstr "Visualiseer een reeds opgeslagen G-code"

#: src/libslic3r/PrintConfig.cpp:3550
msgid "Slice"
msgstr "Slice"

#: src/libslic3r/PrintConfig.cpp:3551
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""
"Slice het model als FFF of SLA, gebaseerd op de 'printer_technology'-"
"configuratiewaarde."

#: src/libslic3r/PrintConfig.cpp:3556
msgid "Help"
msgstr "Help"

#: src/libslic3r/PrintConfig.cpp:3557
msgid "Show this help."
msgstr "Toon deze hulp zien."

#: src/libslic3r/PrintConfig.cpp:3562
msgid "Help (FFF options)"
msgstr "Help (FFF-opties)"

#: src/libslic3r/PrintConfig.cpp:3563
msgid "Show the full list of print/G-code configuration options."
msgstr "Toon de volledige lijst van print- of G-code-configuratie-opties."

#: src/libslic3r/PrintConfig.cpp:3567
msgid "Help (SLA options)"
msgstr "Help (SLA opties)"

#: src/libslic3r/PrintConfig.cpp:3568
msgid "Show the full list of SLA print configuration options."
msgstr "Toon de volledige lijst van SLA-printconfiguratie-opties."

#: src/libslic3r/PrintConfig.cpp:3572
msgid "Output Model Info"
msgstr "Output model-info"

#: src/libslic3r/PrintConfig.cpp:3573
msgid "Write information about the model to the console."
msgstr "Schrijf informatie over het model naar de console."

#: src/libslic3r/PrintConfig.cpp:3577
msgid "Save config file"
msgstr "Sla configuratiebestand op"

#: src/libslic3r/PrintConfig.cpp:3578
msgid "Save configuration to the specified file."
msgstr "Sla configuratie op in aangegeven bestand."

#: src/libslic3r/PrintConfig.cpp:3588
msgid "Align XY"
msgstr "XY uitlijnen"

#: src/libslic3r/PrintConfig.cpp:3589
msgid "Align the model to the given point."
msgstr "Lijn de modellen uit op het gegeven punt."

#: src/libslic3r/PrintConfig.cpp:3594
msgid "Cut model at the given Z."
msgstr "Snijdt model op de ingestelde hoogte."

#: src/libslic3r/PrintConfig.cpp:3615
msgid "Center"
msgstr "Centreer"

#: src/libslic3r/PrintConfig.cpp:3616
msgid "Center the print around the given center."
msgstr "Centreer de print op het middelpunt."

#: src/libslic3r/PrintConfig.cpp:3620
msgid "Don't arrange"
msgstr "Niet schikken"

#: src/libslic3r/PrintConfig.cpp:3621
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""
"Herschik de modellen niet voor het samenvoegen en behoudt de originele X- en "
"Y-coördinaten."

#: src/libslic3r/PrintConfig.cpp:3624
msgid "Duplicate"
msgstr "Dupliceer"

#: src/libslic3r/PrintConfig.cpp:3625
msgid "Multiply copies by this factor."
msgstr "Meerdere kopieën van dit aantal."

#: src/libslic3r/PrintConfig.cpp:3629
msgid "Duplicate by grid"
msgstr "Dupliceer in raster"

#: src/libslic3r/PrintConfig.cpp:3630
msgid "Multiply copies by creating a grid."
msgstr "Meerdere kopieën in raster."

#: src/libslic3r/PrintConfig.cpp:3634
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"Schik de toegevoegde modellen en combineer ze tot één model om eenmalig "
"acties uit te voeren."

#: src/libslic3r/PrintConfig.cpp:3639
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"Probeer alle niet-gesloten meshes te repareren (deze optie is impliciet "
"toegevoegd om, wanneer dat nodig is, onmogelijke modellen toch te slicen)."

#: src/libslic3r/PrintConfig.cpp:3643
msgid "Rotation angle around the Z axis in degrees."
msgstr "Rotatiehoek rond de Z-as in graden."

#: src/libslic3r/PrintConfig.cpp:3647
msgid "Rotate around X"
msgstr "Draai over de X-as"

#: src/libslic3r/PrintConfig.cpp:3648
msgid "Rotation angle around the X axis in degrees."
msgstr "Rotatiehoek rond de X-as in graden."

#: src/libslic3r/PrintConfig.cpp:3652
msgid "Rotate around Y"
msgstr "Draai over de Y-as"

#: src/libslic3r/PrintConfig.cpp:3653
msgid "Rotation angle around the Y axis in degrees."
msgstr "Rotatiehoek rond de Y-as in graden."

#: src/libslic3r/PrintConfig.cpp:3658
msgid "Scaling factor or percentage."
msgstr "Schalingsfactor of percentage."

#: src/libslic3r/PrintConfig.cpp:3663
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""
"Detecteer niet-verbonden onderdelen in het model en deel ze op in "
"verschillende objecten."

#: src/libslic3r/PrintConfig.cpp:3666
msgid "Scale to Fit"
msgstr "Verschaal naar passing"

#: src/libslic3r/PrintConfig.cpp:3667
msgid "Scale to fit the given volume."
msgstr "Verschaal naar passing in het gegeven volume."

#: src/libslic3r/PrintConfig.cpp:3676
msgid "Ignore non-existent config files"
msgstr "Negeer niet-bestaande configuratiebestanden"

#: src/libslic3r/PrintConfig.cpp:3677
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "Geef geen fout als een bestand om te laden niet bestaat."

#: src/libslic3r/PrintConfig.cpp:3680
msgid "Load config file"
msgstr "Laad configuratiebestand"

#: src/libslic3r/PrintConfig.cpp:3681
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""
"Laad configuratie uit een specifiek bestand. Dit kan meerdere keren gebruikt "
"worden om instellingen uit meerdere bestanden te laden."

#: src/libslic3r/PrintConfig.cpp:3684
msgid "Output File"
msgstr "Outputbestand"

#: src/libslic3r/PrintConfig.cpp:3685
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""
"Het bestand waaroverheen wordt geschreven (als dit niet aangegeven is, wort "
"dit gebaseerd op het inputbestand)."

#: src/libslic3r/PrintConfig.cpp:3690
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""
"Als dit is ingeschakeld worden de commando-argumenten naar een bestaande "
"instantie van de PrusaSlicer GUI of een geopend PrusaSlicer venster "
"gestuurd. Dit overschrijft de \"enkele instantie\"-configuratiewaarde van de "
"programmavoorkeuren."

#: src/libslic3r/PrintConfig.cpp:3701
msgid "Data directory"
msgstr "Bestandslocatie voor de data"

#: src/libslic3r/PrintConfig.cpp:3702
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"Laad fabrieksinstellingen en sla op. Dit is handig voor het onderhouden van "
"verschillende profielen of het opnemen van configuraties van een "
"netwerkopslag."

#: src/libslic3r/PrintConfig.cpp:3705
msgid "Logging level"
msgstr "Logboekniveau"

#: src/libslic3r/PrintConfig.cpp:3706
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""
"Stel log-gevoeligheid in. 0: fataal, 1: fout, 2: waarschuwing, 3: info, 4: "
"debug, 5: traceer\n"
"Voorbeeld: loglevel = 2 geeft fataal-, fout- en waarschuwingslevelberichten."

#: src/libslic3r/PrintConfig.cpp:3712
msgid "Render with a software renderer"
msgstr "Render met software-renderer"

#: src/libslic3r/PrintConfig.cpp:3713
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""
"Render met software-renderer. De meegeleverde MESA-software-renderer is "
"geladen in plaats van het standaard OpenGL stuurprogramma."

#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr "Fout bij ZIP-archief"

#: src/libslic3r/PrintObject.cpp:114
msgid "Processing triangulated mesh"
msgstr "Mesh aan het verwerken"

#: src/libslic3r/PrintObject.cpp:158
msgid "Generating perimeters"
msgstr "Perimeters genereren"

#: src/libslic3r/PrintObject.cpp:261
msgid "Preparing infill"
msgstr "Vulling voorbereiden"

#: src/libslic3r/PrintObject.cpp:422
msgid "Generating support material"
msgstr "Support genereren"