package Slic3r::Print;
use Moo;

use File::Basename qw(basename fileparse);
use Math::ConvexHull 1.0.4 qw(convex_hull);
use Slic3r::ExtrusionPath ':roles';
use Slic3r::Geometry qw(X Y Z X1 Y1 X2 Y2 PI scale unscale move_points);
use Slic3r::Geometry::Clipper qw(diff_ex union_ex offset JT_ROUND);
use Time::HiRes qw(gettimeofday tv_interval);

has 'objects'                => (is => 'rw', default => sub {[]});
has 'copies'                 => (is => 'rw', default => sub {[]});  # obj_idx => [copies...]
has 'total_extrusion_length' => (is => 'rw');
has 'processing_time'        => (is => 'rw', required => 0);

# ordered collection of extrusion paths to build skirt loops
has 'skirt' => (
    is      => 'rw',
    #isa     => 'ArrayRef[Slic3r::ExtrusionLoop]',
    default => sub { [] },
);

sub add_object_from_file {
    my $self = shift;
    my ($input_file) = @_;
    
    my $object;
    if ($input_file =~ /\.stl$/i) {
        my $mesh = Slic3r::Format::STL->read_file($input_file);
        $mesh->check_manifoldness;
        $object = $self->add_object_from_mesh($mesh);
    } elsif ($input_file =~ /\.obj$/i) {
        my $mesh = Slic3r::Format::OBJ->read_file($input_file);
        $mesh->check_manifoldness;
        $object = $self->add_object_from_mesh($mesh);
    } elsif ( $input_file =~ /\.amf(\.xml)?$/i) {
        my ($materials, $meshes_by_material) = Slic3r::Format::AMF->read_file($input_file);
        $_->check_manifoldness for values %$meshes_by_material;
        $object = $self->add_object_from_mesh($meshes_by_material->{_} || +(values %$meshes_by_material)[0]);
    } else {
        die "Input file must have .stl, .obj or .amf(.xml) extension\n";
    }
    $object->input_file($input_file);
    return $object;
}

sub add_object_from_mesh {
    my $self = shift;
    my ($mesh) = @_;
    
    $mesh->rotate($Slic3r::rotate);
    $mesh->scale($Slic3r::scale / $Slic3r::scaling_factor);
    $mesh->align_to_origin;
    
    # initialize print object
    my @size = $mesh->size;
    my $object = Slic3r::Print::Object->new(
        mesh     => $mesh,
        x_length => $size[X],
        y_length => $size[Y],
    );
    
    push @{$self->objects}, $object;
    push @{$self->copies}, [[0, 0]];
    return $object;
}

sub cleanup {
    my $self = shift;
    $_->cleanup for @{$self->objects};
    @{$self->skirt} = ();
    $self->total_extrusion_length(0);
    $self->processing_time(0);
}

sub layer_count {
    my $self = shift;
    my $count = 0;
    foreach my $object (@{$self->objects}) {
        $count = @{$object->layers} if @{$object->layers} > $count;
    }
    return $count;
}

sub duplicate {
    my $self = shift;
    
    if ($Slic3r::duplicate_grid->[X] > 1 || $Slic3r::duplicate_grid->[Y] > 1) {
        if (@{$self->objects} > 1) {
            die "Grid duplication is not supported with multiple objects\n";
        }
        my $object = $self->objects->[0];
        
        # generate offsets for copies
        my $dist = scale $Slic3r::duplicate_distance;
        @{$self->copies->[0]} = ();
        for my $x_copy (1..$Slic3r::duplicate_grid->[X]) {
            for my $y_copy (1..$Slic3r::duplicate_grid->[Y]) {
                push @{$self->copies->[0]}, [
                    ($object->x_length + $dist) * ($x_copy-1),
                    ($object->y_length + $dist) * ($y_copy-1),
                ];
            }
        }
    } elsif ($Slic3r::duplicate > 1) {
        foreach my $copies (@{$self->copies}) {
            @$copies = map [0,0], 1..$Slic3r::duplicate;
        }
        $self->arrange_objects;
    }
}

sub arrange_objects {
    my $self = shift;

    my $total_parts = scalar map @$_, @{$self->copies};
    my $partx = my $party = 0;
    foreach my $object (@{$self->objects}) {
        $partx = $object->x_length if $object->x_length > $partx;
        $party = $object->y_length if $object->y_length > $party;
    }
    my @positions = Slic3r::Geometry::arrange
        ($total_parts, $partx, $party, (map scale $_, @$Slic3r::bed_size), scale $Slic3r::duplicate_distance);
    
    for my $obj_idx (0..$#{$self->objects}) {
        @{$self->copies->[$obj_idx]} = splice @positions, 0, scalar @{$self->copies->[$obj_idx]};
    }
}

sub bounding_box {
    my $self = shift;
    
    my @points = ();
    foreach my $obj_idx (0 .. $#{$self->objects}) {
        my $object = $self->objects->[$obj_idx];
        foreach my $copy (@{$self->copies->[$obj_idx]}) {
            push @points,
                [ $copy->[X], $copy->[Y] ],
                [ $copy->[X] + $object->x_length, $copy->[Y] ],
                [ $copy->[X] + $object->x_length, $copy->[Y] + $object->y_length ],
                [ $copy->[X], $copy->[Y] + $object->y_length ];
        }
    }
    return Slic3r::Geometry::bounding_box(\@points);
}

sub size {
    my $self = shift;
    
    my @bb = $self->bounding_box;
    return [ $bb[X2] - $bb[X1], $bb[Y2] - $bb[Y1] ];
}

sub export_gcode {
    my $self = shift;
    my %params = @_;
    
    my $status_cb = $params{status_cb} || sub {};
    my $t0 = [gettimeofday];
    
    # skein the STL into layers
    # each layer has surfaces with holes
    $status_cb->(5, "Processing input file");    
    $status_cb->(10, "Processing triangulated mesh");
    $_->slice for @{$self->objects};
    unless ($params{keep_meshes}) {
        $_->mesh(undef) for @{$self->objects};  # free memory
    }
    
    # make perimeters
    # this will add a set of extrusion loops to each layer
    # as well as generate infill boundaries
    $status_cb->(20, "Generating perimeters");
    $_->make_perimeters for @{$self->objects};
    
    # this will clip $layer->surfaces to the infill boundaries 
    # and split them in top/bottom/internal surfaces;
    $status_cb->(30, "Detecting solid surfaces");
    $_->detect_surfaces_type for @{$self->objects};
    
    # decide what surfaces are to be filled
    $status_cb->(35, "Preparing infill surfaces");
    $_->prepare_fill_surfaces for map @{$_->layers}, @{$self->objects};
    
    # this will remove unprintable surfaces
    # (those that are too tight for extrusion)
    $status_cb->(40, "Cleaning up");
    $_->remove_small_surfaces for map @{$_->layers}, @{$self->objects};
    
    # this will detect bridges and reverse bridges
    # and rearrange top/bottom/internal surfaces
    $status_cb->(45, "Detect bridges");
    $_->process_bridges for map @{$_->layers}, @{$self->objects};
    
    # detect which fill surfaces are near external layers
    # they will be split in internal and internal-solid surfaces
    $status_cb->(60, "Generating horizontal shells");
    $_->discover_horizontal_shells for @{$self->objects};
    
    # free memory
    @{$_->surfaces} = () for map @{$_->layers}, @{$self->objects};
    
    # combine fill surfaces to honor the "infill every N layers" option
    $status_cb->(70, "Combining infill");
    $_->infill_every_layers for @{$self->objects};
    
    # this will generate extrusion paths for each layer
    $status_cb->(80, "Infilling layers");
    {
        my $fill_maker = Slic3r::Fill->new('print' => $self);
        
        my @items = ();  # [obj_idx, layer_id]
        foreach my $obj_idx (0 .. $#{$self->objects}) {
            push @items, map [$obj_idx, $_], 0..$#{$self->objects->[$obj_idx]->layers};
        }
        Slic3r::parallelize(
            items => [@items],
            thread_cb => sub {
                my $q = shift;
                $Slic3r::Geometry::Clipper::clipper = Math::Clipper->new;
                my $fills = {};
                while (defined (my $obj_layer = $q->dequeue)) {
                    my ($obj_idx, $layer_id) = @$obj_layer;
                    $fills->{$obj_idx} ||= {};
                    $fills->{$obj_idx}{$layer_id} = [ $fill_maker->make_fill($self->objects->[$obj_idx]->layers->[$layer_id]) ];
                }
                return $fills;
            },
            collect_cb => sub {
                my $fills = shift;
                foreach my $obj_idx (keys %$fills) {
                    foreach my $layer_id (keys %{$fills->{$obj_idx}}) {
                        @{$self->objects->[$obj_idx]->layers->[$layer_id]->fills} = @{$fills->{$obj_idx}{$layer_id}};
                    }
                }
            },
            no_threads_cb => sub {
                foreach my $layer (map @{$_->layers}, @{$self->objects}) {
                    @{$layer->fills} = $fill_maker->make_fill($layer);
                }
            },
        );
    }
    
    # generate support material
    if ($Slic3r::support_material) {
        $status_cb->(85, "Generating support material");
        $_->generate_support_material(print => $self) for @{$self->objects};
    }
    
    # free memory (note that support material needs fill_surfaces)
    @{$_->fill_surfaces} = () for map @{$_->layers}, @{$self->objects};
    
    # make skirt
    $status_cb->(88, "Generating skirt");
    $self->make_skirt;
    
    # output everything to a G-code file
    my $output_file = $self->expanded_output_filepath($params{output_file});
    $status_cb->(90, "Exporting G-code to $output_file");
    $self->write_gcode($output_file);
    
    # run post-processing scripts
    if (@$Slic3r::post_process) {
        $status_cb->(95, "Running post-processing scripts");
        for (@$Slic3r::post_process) {
            Slic3r::debugf "  '%s' '%s'\n", $_, $output_file;
            system($_, $output_file);
        }
    }
    
    # output some statistics
    $self->processing_time(tv_interval($t0));
    printf "Done. Process took %d minutes and %.3f seconds\n", 
        int($self->processing_time/60),
        $self->processing_time - int($self->processing_time/60)*60;
    
    # TODO: more statistics!
    printf "Filament required: %.1fmm (%.1fcm3)\n",
        $self->total_extrusion_length, $self->total_extrusion_volume;
}

sub export_svg {
    my $self = shift;
    my %params = @_;
    
    $_->slice for @{$self->objects};
    unless ($params{keep_meshes}) {
        $_->mesh(undef) for @{$self->objects};  # free memory
    }
    $self->arrange_objects;
    
    my $output_file = $self->expanded_output_filepath($params{output_file});
    $output_file =~ s/\.gcode$/.svg/i;
    
    open my $fh, ">", $output_file or die "Failed to open $output_file for writing\n";
    print "Exporting to $output_file...";
    my $print_size = $self->size;
    print $fh sprintf <<"EOF", unscale($print_size->[X]), unscale($print_size->[Y]);
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">
<svg width="%s" height="%s" xmlns="http://www.w3.org/2000/svg" xmlns:svg="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:slic3r="http://slic3r.org/namespaces/slic3r">
  <!-- 
  Generated using Slic3r $Slic3r::VERSION
  http://slic3r.org/
   -->
EOF
    
    my $print_polygon = sub {
        my ($polygon, $type) = @_;
        printf $fh qq{    <polygon slic3r:type="%s" points="%s" style="fill: %s" />\n},
            $type, (join ' ', map { join ',', map unscale $_, @$_ } @$polygon),
            ($type eq 'contour' ? 'white' : 'black');
    };
    
    for my $layer_id (0..$self->layer_count-1) {
        my @layers = map $_->layers->[$layer_id], @{$self->objects};
        printf $fh qq{  <g id="layer%d" slic3r:z="%s">\n}, $layer_id, unscale +(grep defined $_, @layers)[0]->slice_z;
        
        for my $obj_idx (0 .. $#layers) {
            my $layer = $layers[$layer_id] or next;
            
            # sort slices so that the outermost ones come first
            my @slices = sort { $a->expolygon->contour->encloses_point($b->expolygon->contour->[0]) ? 0 : 1 } @{$layer->slices};
            
            foreach my $copy (@{$self->copies->[$obj_idx]}) {
                foreach my $slice (@slices) {
                    my $expolygon = $slice->expolygon->clone;
                    $expolygon->translate(@$copy);
                    $print_polygon->($expolygon->contour, 'contour');
                    $print_polygon->($_, 'hole') for $expolygon->holes;
                }
            }
        }
        print $fh qq{  </g>\n};
    }
    
    print $fh "</svg>\n";
    close $fh;
    print "Done.\n";
}

sub make_skirt {
    my $self = shift;
    return unless $Slic3r::skirts > 0;
    
    # collect points from all layers contained in skirt height
    my $skirt_height = $Slic3r::skirt_height;
    $skirt_height = $self->layer_count if $skirt_height > $self->layer_count;
    my @points = ();
    foreach my $obj_idx (0 .. $#{$self->objects}) {
        my @layers = map $self->objects->[$obj_idx]->layer($_), 0..($skirt_height-1);
        my @layer_points = (
            (map @$_, map @{$_->expolygon}, map @{$_->slices}, @layers),
            (map @$_, map @{$_->thin_walls}, @layers),
            (map @{$_->polyline->deserialize}, map @{$_->support_fills->paths}, grep $_->support_fills, @layers),
        );
        push @points, map move_points($_, @layer_points), @{$self->copies->[$obj_idx]};
    }
    return if @points < 3;  # at least three points required for a convex hull
    
    # find out convex hull
    my $convex_hull = convex_hull(\@points);
    
    # draw outlines from outside to inside
    my @skirt = ();
    for (my $i = $Slic3r::skirts - 1; $i >= 0; $i--) {
        my $distance = scale ($Slic3r::skirt_distance + ($Slic3r::flow_spacing * $i));
        my $outline = offset([$convex_hull], $distance, $Slic3r::scaling_factor * 100, JT_ROUND);
        push @skirt, Slic3r::ExtrusionLoop->new(
            polygon => Slic3r::Polygon->new(@{$outline->[0]}),
            role => EXTR_ROLE_SKIRT,
        );
    }
    push @{$self->skirt}, @skirt;
}

sub write_gcode {
    my $self = shift;
    my ($file) = @_;
    
    # open output gcode file
    open my $fh, ">", $file
        or die "Failed to open $file for writing\n";
    
    # write some information
    my @lt = localtime;
    printf $fh "; generated by Slic3r $Slic3r::VERSION on %04d-%02d-%02d at %02d:%02d:%02d\n\n",
        $lt[5] + 1900, $lt[4]+1, $lt[3], $lt[2], $lt[1], $lt[0];

    print $fh "; $_\n" foreach split /\R/, $Slic3r::notes;
    print $fh "\n" if $Slic3r::notes;
    
    for (qw(layer_height perimeters solid_layers fill_density nozzle_diameter filament_diameter
        extrusion_multiplier perimeter_speed infill_speed travel_speed extrusion_width_ratio scale)) {
        printf $fh "; %s = %s\n", $_, Slic3r::Config->get($_);
    }
    printf $fh "; single wall width = %.2fmm\n", $Slic3r::flow_width;
    print  $fh "\n";
    
    # set up our extruder object
    my $extruder = Slic3r::Extruder->new;
    my $min_print_speed = 60 * $Slic3r::min_print_speed;
    my $dec = $extruder->dec;
    if ($Slic3r::support_material && $Slic3r::support_material_tool > 0) {
        print $fh $extruder->set_tool(0);
    }
    print $fh $extruder->set_fan(0, 1) if $Slic3r::cooling && $Slic3r::disable_fan_first_layers;
    
    # write start commands to file
    printf $fh $extruder->set_bed_temperature($Slic3r::first_layer_bed_temperature, 1),
            if $Slic3r::first_layer_bed_temperature && $Slic3r::start_gcode !~ /M190/i;
    printf $fh $extruder->set_temperature($Slic3r::first_layer_temperature)
        if $Slic3r::first_layer_temperature;
    printf $fh "%s\n", Slic3r::Config->replace_options($Slic3r::start_gcode);
    printf $fh $extruder->set_temperature($Slic3r::first_layer_temperature, 1)
            if $Slic3r::first_layer_temperature && $Slic3r::start_gcode !~ /M109/i;
    print  $fh "G90 ; use absolute coordinates\n";
    print  $fh "G21 ; set units to millimeters\n";
    if ($Slic3r::gcode_flavor =~ /^(?:reprap|teacup)$/) {
        printf $fh "G92 %s0 ; reset extrusion distance\n", $Slic3r::extrusion_axis
            if $Slic3r::extrusion_axis && !$Slic3r::use_relative_e_distances;
        if ($Slic3r::gcode_flavor =~ /^(?:reprap|makerbot)$/) {
            if ($Slic3r::use_relative_e_distances) {
                print $fh "M83 ; use relative distances for extrusion\n";
            } else {
                print $fh "M82 ; use absolute distances for extrusion\n";
            }
        }
    }
    
    # calculate X,Y shift to center print around specified origin
    my @print_bb = $self->bounding_box;
    my @shift = (
        $Slic3r::print_center->[X] - (unscale ($print_bb[X2] - $print_bb[X1]) / 2) - unscale $print_bb[X1],
        $Slic3r::print_center->[Y] - (unscale ($print_bb[Y2] - $print_bb[Y1]) / 2) - unscale $print_bb[Y1],
    );
    
    # prepare the logic to print one layer
    my $skirt_done = 0;
    my $extrude_layer = sub {
        my ($layer_id, $object_copies) = @_;
        my $gcode = "";
        
        if ($layer_id == 1) {
            $gcode .= $extruder->set_temperature($Slic3r::temperature)
                if $Slic3r::temperature && $Slic3r::temperature != $Slic3r::first_layer_temperature;
            $gcode .= $extruder->set_bed_temperature($Slic3r::bed_temperature)
                if $Slic3r::bed_temperature && $Slic3r::bed_temperature != $Slic3r::first_layer_bed_temperature;
        }
        
        # go to layer (just use the first one, we only need Z from it)
        $gcode .= $extruder->change_layer($self->objects->[$object_copies->[0][0]]->layers->[$layer_id]);
        $extruder->elapsed_time(0);
        
        # extrude skirt
        if (!$skirt_done) {
            $extruder->shift_x($shift[X]);
            $extruder->shift_y($shift[Y]);
            $gcode .= $extruder->set_acceleration($Slic3r::perimeter_acceleration);
            if ($layer_id < $Slic3r::skirt_height) {
                $gcode .= $extruder->extrude_loop($_, 'skirt') for @{$self->skirt};
            }
            $skirt_done = 1;
        }
        
        for my $obj_copy (@$object_copies) {
            my ($obj_idx, $copy) = @$obj_copy;
            my $layer = $self->objects->[$obj_idx]->layers->[$layer_id];
            
            # retract explicitely because changing the shift_[xy] properties below
            # won't always trigger the automatic retraction
            $gcode .= $extruder->retract;
            
            $extruder->shift_x($shift[X] + unscale $copy->[X]);
            $extruder->shift_y($shift[Y] + unscale $copy->[Y]);
            
            # extrude perimeters
            $gcode .= $extruder->extrude($_, 'perimeter') for @{ $layer->perimeters };
            
            # extrude fills
            $gcode .= $extruder->set_acceleration($Slic3r::infill_acceleration);
            for my $fill (@{ $layer->fills }) {
                $gcode .= $extruder->extrude_path($_, 'fill') 
                    for $fill->shortest_path($extruder->last_pos);
            }
            
            # extrude support material
            if ($layer->support_fills) {
                $gcode .= $extruder->set_tool($Slic3r::support_material_tool)
                    if $Slic3r::support_material_tool > 0;
                $gcode .= $extruder->extrude_path($_, 'support material') 
                    for $layer->support_fills->shortest_path($extruder->last_pos);
                $gcode .= $extruder->set_tool(0)
                    if $Slic3r::support_material_tool > 0;
            }
        }
        last if !$gcode;
        
        my $fan_speed = $Slic3r::fan_always_on ? $Slic3r::min_fan_speed : 0;
        my $speed_factor = 1;
        if ($Slic3r::cooling) {
            my $layer_time = $extruder->elapsed_time;
            Slic3r::debugf "Layer %d estimated printing time: %d seconds\n", $layer_id, $layer_time;
            if ($layer_time < $Slic3r::slowdown_below_layer_time) {
                $fan_speed = $Slic3r::max_fan_speed;
                $speed_factor = $layer_time / $Slic3r::slowdown_below_layer_time;
            } elsif ($layer_time < $Slic3r::fan_below_layer_time) {
                $fan_speed = $Slic3r::max_fan_speed - ($Slic3r::max_fan_speed - $Slic3r::min_fan_speed)
                    * ($layer_time - $Slic3r::slowdown_below_layer_time)
                    / ($Slic3r::fan_below_layer_time - $Slic3r::slowdown_below_layer_time); #/
            }
            Slic3r::debugf "  fan = %d%%, speed = %d%%\n", $fan_speed, $speed_factor * 100;
            
            if ($speed_factor < 1) {
                $gcode =~ s/^(?=.*? [XY])(?=.*? E)(G1 .*?F)(\d+(?:\.\d+)?)/
                    my $new_speed = $2 * $speed_factor;
                    $1 . sprintf("%.${dec}f", $new_speed < $min_print_speed ? $min_print_speed : $new_speed)
                    /gexm;
            }
            $fan_speed = 0 if $layer_id < $Slic3r::disable_fan_first_layers;
        }
        $gcode = $extruder->set_fan($fan_speed) . $gcode;
        
        # bridge fan speed
        if (!$Slic3r::cooling || $Slic3r::bridge_fan_speed == 0 || $layer_id < $Slic3r::disable_fan_first_layers) {
            $gcode =~ s/^;_BRIDGE_FAN_(?:START|END)\n//gm;
        } else {
            $gcode =~ s/^;_BRIDGE_FAN_START\n/ $extruder->set_fan($Slic3r::bridge_fan_speed, 1) /gmex;
            $gcode =~ s/^;_BRIDGE_FAN_END\n/ $extruder->set_fan($fan_speed, 1) /gmex;
        }
        
        return $gcode;
    };
    
    # do all objects for each layer
    if ($Slic3r::complete_objects) {
        
        # print objects from the smallest to the tallest to avoid collisions
        # when moving onto next object starting point
        my @obj_idx = sort { $self->objects->[$a]->layer_count <=> $self->objects->[$b]->layer_count } 0..$#{$self->objects};
        
        my $finished_objects = 0;
        for my $obj_idx (@obj_idx) {
            for my $copy (@{ $self->copies->[$obj_idx] }) {
                # move to the origin position for the copy we're going to print.
                # this happens before Z goes down to layer 0 again, so that 
                # no collision happens hopefully.
                if ($finished_objects > 0) {
                    $extruder->shift_x($shift[X] + unscale $copy->[X]);
                    $extruder->shift_y($shift[Y] + unscale $copy->[Y]);
                    print $fh $extruder->retract;
                    print $fh $extruder->G0(Slic3r::Point->new(0,0), undef, 0, 'move to origin position for next object');
                }
                
                for my $layer_id (0..$#{$self->objects->[$obj_idx]->layers}) {
                    # if we are printing the bottom layer of an object, and we have already finished
                    # another one, set first layer temperatures. this happens before the Z move
                    # is triggered, so machine has more time to reach such temperatures
                    if ($layer_id == 0 && $finished_objects > 0) {
                        printf $fh $extruder->set_bed_temperature($Slic3r::first_layer_bed_temperature),
                            if $Slic3r::first_layer_bed_temperature;
                        printf $fh $extruder->set_temperature($Slic3r::first_layer_temperature)
                            if $Slic3r::first_layer_temperature;
                    }
                    print $fh $extrude_layer->($layer_id, [[ $obj_idx, $copy ]]);
                }
                $finished_objects++;
            }
        }
    } else {
        for my $layer_id (0..$self->layer_count-1) {
            my @object_copies = ();
            for my $obj_idx (grep $self->objects->[$_]->layers->[$layer_id], 0..$#{$self->objects}) {
                push @object_copies, map [ $obj_idx, $_ ], @{ $self->copies->[$obj_idx] };
            }
            print $fh $extrude_layer->($layer_id, \@object_copies);
        }
    }
    
    # save statistic data
    $self->total_extrusion_length($extruder->total_extrusion_length);
    
    # write end commands to file
    print $fh $extruder->retract;
    print $fh $extruder->set_fan(0);
    print $fh "M501 ; reset acceleration\n" if $Slic3r::acceleration;
    printf $fh "%s\n", Slic3r::Config->replace_options($Slic3r::end_gcode);
    
    printf $fh "; filament used = %.1fmm (%.1fcm3)\n",
        $self->total_extrusion_length, $self->total_extrusion_volume;
    
    # close our gcode file
    close $fh;
}

sub total_extrusion_volume {
    my $self = shift;
    return $self->total_extrusion_length * ($Slic3r::filament_diameter**2) * PI/4 / 1000;
}

# this method will return the value of $self->output_file after expanding its
# format variables with their values
sub expanded_output_filepath {
    my $self = shift;
    my ($path) = @_;
    
    # if no explicit output file was defined, we take the input
    # file directory and append the specified filename format
    my $input_file = $self->objects->[0]->input_file;
    $path ||= (fileparse($input_file))[1] . $Slic3r::output_filename_format;
    
    my $input_filename = my $input_filename_base = basename($input_file);
    $input_filename_base =~ s/\.(?:stl|amf(?:\.xml)?)$//i;
    
    return Slic3r::Config->replace_options($path, {
        input_filename      => $input_filename,
        input_filename_base => $input_filename_base,
    });
}

1;