# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2019-05-10 13:25+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: src/slic3r/GUI/AboutDialog.cpp:35 #, possible-c-format msgid "About %s" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:67 src/slic3r/GUI/MainFrame.cpp:59 msgid "Version" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:92 msgid "Copyright" msgstr "" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:94 msgid "is licensed under the" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:95 msgid "GNU Affero General Public License, version 3" msgstr "" #: src/slic3r/GUI/AboutDialog.cpp:96 msgid "" "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and " "numerous others." msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:400 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:398 msgid "Running post-processing scripts" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:87 msgid "G-code file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:91 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:109 msgid "Slicing complete" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:105 msgid "Masked SLA file exported to %1%" msgstr "" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:409 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:60 msgid "Shape" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:68 msgid "Rectangular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:72 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:137 #: src/slic3r/GUI/Tab.cpp:2258 msgid "Size" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:73 msgid "Size in X and Y of the rectangular plate." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:79 msgid "Origin" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:80 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:84 msgid "Circular" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:87 src/slic3r/GUI/ConfigWizard.cpp:118 #: src/slic3r/GUI/ConfigWizard.cpp:565 src/slic3r/GUI/ConfigWizard.cpp:579 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229 #: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:84 #: src/libslic3r/PrintConfig.cpp:60 src/libslic3r/PrintConfig.cpp:67 #: src/libslic3r/PrintConfig.cpp:76 src/libslic3r/PrintConfig.cpp:211 #: src/libslic3r/PrintConfig.cpp:286 src/libslic3r/PrintConfig.cpp:294 #: src/libslic3r/PrintConfig.cpp:344 src/libslic3r/PrintConfig.cpp:354 #: src/libslic3r/PrintConfig.cpp:474 src/libslic3r/PrintConfig.cpp:485 #: src/libslic3r/PrintConfig.cpp:503 src/libslic3r/PrintConfig.cpp:681 #: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1252 #: src/libslic3r/PrintConfig.cpp:1270 src/libslic3r/PrintConfig.cpp:1288 #: src/libslic3r/PrintConfig.cpp:1340 src/libslic3r/PrintConfig.cpp:1350 #: src/libslic3r/PrintConfig.cpp:1471 src/libslic3r/PrintConfig.cpp:1479 #: src/libslic3r/PrintConfig.cpp:1520 src/libslic3r/PrintConfig.cpp:1528 #: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:1546 #: src/libslic3r/PrintConfig.cpp:1554 src/libslic3r/PrintConfig.cpp:1637 #: src/libslic3r/PrintConfig.cpp:1853 src/libslic3r/PrintConfig.cpp:1923 #: src/libslic3r/PrintConfig.cpp:1957 src/libslic3r/PrintConfig.cpp:2150 #: src/libslic3r/PrintConfig.cpp:2157 src/libslic3r/PrintConfig.cpp:2164 #: src/libslic3r/PrintConfig.cpp:2194 src/libslic3r/PrintConfig.cpp:2204 #: src/libslic3r/PrintConfig.cpp:2214 src/libslic3r/PrintConfig.cpp:2322 #: src/libslic3r/PrintConfig.cpp:2397 src/libslic3r/PrintConfig.cpp:2406 #: src/libslic3r/PrintConfig.cpp:2415 src/libslic3r/PrintConfig.cpp:2425 #: src/libslic3r/PrintConfig.cpp:2469 src/libslic3r/PrintConfig.cpp:2479 #: src/libslic3r/PrintConfig.cpp:2498 src/libslic3r/PrintConfig.cpp:2508 #: src/libslic3r/PrintConfig.cpp:2517 src/libslic3r/PrintConfig.cpp:2535 #: src/libslic3r/PrintConfig.cpp:2550 src/libslic3r/PrintConfig.cpp:2564 #: src/libslic3r/PrintConfig.cpp:2577 src/libslic3r/PrintConfig.cpp:2587 msgid "mm" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:88 src/libslic3r/PrintConfig.cpp:678 msgid "Diameter" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:89 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:93 src/slic3r/GUI/GUI_Preview.cpp:239 #: src/libslic3r/GCode/PreviewData.cpp:175 msgid "Custom" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:97 msgid "Load shape from STL..." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:143 msgid "Settings" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:316 msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/GUI_ObjectList.cpp:1443 msgid "Error! " msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:342 msgid "The selected file contains no geometry." msgstr "" #: src/slic3r/GUI/BedShapeDialog.cpp:346 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" #: src/slic3r/GUI/BedShapeDialog.hpp:45 src/slic3r/GUI/ConfigWizard.cpp:530 msgid "Bed Shape" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "" #: src/slic3r/GUI/ButtonsDescription.cpp:53 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18 msgid "Upgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20 msgid "Downgrade" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22 msgid "Before roll back" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 msgid "User" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 msgid "Unknown" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:39 msgid "Active: " msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45 msgid "slic3r version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1274 #: src/slic3r/GUI/Tab.hpp:315 msgid "print" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47 msgid "filaments" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:48 src/slic3r/GUI/Preset.cpp:1278 #: src/slic3r/GUI/Tab.hpp:366 msgid "printer" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:929 msgid "vendor" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 msgid "version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 msgid "min slic3r version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 msgid "max slic3r version" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 msgid "model" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58 msgid "variants" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70 #, possible-c-format msgid "Incompatible with this %s" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:73 msgid "Activate" msgstr "" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:99 msgid "Configuration Snapshots" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:118 msgid "nozzle" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:122 msgid "Alternate nozzles:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:188 msgid "All standard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:189 src/slic3r/GUI/Tab.cpp:3000 msgid "All" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:190 src/slic3r/GUI/Plater.cpp:433 #: src/libslic3r/GCode/PreviewData.cpp:162 msgid "None" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:296 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:298 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:300 msgid "Welcome" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/GUI_App.cpp:670 #, possible-c-format msgid "Run %s" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:306 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:311 msgid "" "Remove user profiles - install from scratch (a snapshot will be taken " "beforehand)" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:342 #, possible-c-format msgid "%s Family" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:379 msgid "Custom Printer Setup" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:379 msgid "Custom Printer" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:381 msgid "Define a custom printer profile" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:383 msgid "Custom profile name:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:407 msgid "Automatic updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:407 msgid "Updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:415 src/slic3r/GUI/Preferences.cpp:61 msgid "Check for application updates" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:419 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:425 src/slic3r/GUI/Preferences.cpp:69 msgid "Update built-in Presets automatically" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:429 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:432 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:437 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:444 msgid "Other Vendors" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:446 #, possible-c-format msgid "Pick another vendor supported by %s:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:492 msgid "Firmware Type" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:492 src/slic3r/GUI/Tab.cpp:1921 msgid "Firmware" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:496 msgid "Choose the type of firmware used by your printer." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:530 msgid "Bed Shape and Size" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:533 msgid "Set the shape of your printer's bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:547 msgid "Filament and Nozzle Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:547 msgid "Print Diameters" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:561 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:564 msgid "Nozzle Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:574 msgid "Enter the diameter of your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:575 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:578 msgid "Filament Diameter:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:596 msgid "Extruder and Bed Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:596 msgid "Temperatures" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:612 msgid "Enter the temperature needed for extruding your filament." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:613 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:616 msgid "Extrusion Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:617 src/slic3r/GUI/ConfigWizard.cpp:631 msgid "°C" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:626 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:627 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:630 msgid "Bed Temperature:" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1093 msgid "Select all standard printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1096 msgid "< &Back" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1097 msgid "&Next >" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1098 msgid "&Finish" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1099 src/slic3r/GUI/FirmwareDialog.cpp:147 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37 #: src/slic3r/GUI/ProgressStatusBar.cpp:28 msgid "Cancel" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1113 msgid "Prusa FFF Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1116 msgid "Prusa MSLA Technology Printers" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1185 msgid "Configuration Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1186 msgid "Configuration &Assistant" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1188 msgid "Configuration Wizard" msgstr "" #: src/slic3r/GUI/ConfigWizard.cpp:1189 msgid "Configuration &Wizard" msgstr "" #: src/slic3r/GUI/Field.cpp:117 msgid "default value" msgstr "" #: src/slic3r/GUI/Field.cpp:120 msgid "parameter name" msgstr "" #: src/slic3r/GUI/Field.cpp:148 #, possible-c-format msgid "%s doesn't support percentage" msgstr "" #: src/slic3r/GUI/Field.cpp:162 src/slic3r/GUI/Field.cpp:185 msgid "Invalid numeric input." msgstr "" #: src/slic3r/GUI/Field.cpp:167 msgid "Input value is out of range" msgstr "" #: src/slic3r/GUI/Field.cpp:193 #, possible-c-format msgid "" "Do you mean %d%% instead of %d %s?\n" "Select YES if you want to change this value to %d%%, \n" "or NO if you are sure that %d %s is a correct value." msgstr "" #: src/slic3r/GUI/Field.cpp:196 msgid "Parameter validation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:146 msgid "Flash!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:148 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:192 msgid "Flashing failed: " msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:273 msgid "Flashing succeeded!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:274 msgid "Flashing failed. Please see the avrdude log below." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:275 msgid "Flashing cancelled." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:313 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:400 src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:417 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:530 #, possible-c-format msgid "The %s device could not have been found" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:608 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:610 #, possible-c-format msgid "Error: %s" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:740 msgid "Firmware flasher" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:765 msgid "Firmware image:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:768 src/slic3r/GUI/Tab.cpp:1682 msgid "Browse" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:770 msgid "Serial port:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:772 msgid "Autodetected" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:773 msgid "Rescan" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:780 msgid "Progress:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:783 msgid "Status:" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:784 msgid "Ready" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:804 msgid "Advanced: Output log" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:815 #: src/slic3r/GUI/PrintHostDialogs.cpp:160 msgid "Close" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:863 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:864 msgid "Confirmation" msgstr "" #: src/slic3r/GUI/FirmwareDialog.cpp:867 msgid "Cancelling..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:720 msgid "An object outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:721 msgid "A toolpath outside the print area was detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:722 msgid "SLA supports outside the print area were detected" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:723 msgid "Some objects are not visible when editing supports" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:725 msgid "" "An object outside the print area was detected\n" "Resolve the current problem to continue slicing" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3434 msgid "Add..." msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3444 src/slic3r/GUI/GUI_ObjectList.cpp:1269 #: src/slic3r/GUI/Plater.cpp:2933 src/slic3r/GUI/Plater.cpp:2951 #: src/slic3r/GUI/Tab.cpp:2951 msgid "Delete" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3455 src/slic3r/GUI/Plater.cpp:3341 msgid "Delete all" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3466 src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Arrange" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3480 src/slic3r/GUI/Tab.cpp:2892 msgid "Copy" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3491 msgid "Paste" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3505 msgid "Add instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3517 msgid "Remove instance" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3532 msgid "Split to objects" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3544 src/slic3r/GUI/GUI_ObjectList.cpp:1122 msgid "Split to parts" msgstr "" #: src/slic3r/GUI/GLCanvas3D.cpp:3559 msgid "Layers editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195 msgid "Rotate lower part upwards" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:36 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198 msgid "Perform cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:43 msgid "Cut object:" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3039 msgid "Cut" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193 msgid "Keep upper part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194 msgid "Keep lower part" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32 msgid "Place on face" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51 msgid "Move" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177 msgid "Position (mm)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177 msgid "Displacement (mm)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:342 #: src/libslic3r/PrintConfig.cpp:3088 msgid "Rotate" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491 msgid "Rotation (deg)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:231 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:343 #: src/libslic3r/PrintConfig.cpp:3103 msgid "Scale" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276 msgid "Scale (%)" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:840 msgid "Head diameter: " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:853 msgid "Lock supports under new islands" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:857 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1239 msgid "Remove selected points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:861 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:914 msgid "Remove all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:866 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242 msgid "Apply changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:871 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1243 msgid "Discard changes" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:879 msgid "Minimal points distance: " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:890 msgid "Support points density: " msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:904 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1245 msgid "Auto-generate points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:910 msgid "Manual editing" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:928 msgid "Clipping of view:" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:930 msgid "Reset direction" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:997 msgid "SLA Support Points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024 msgid "Do you want to save your manually edited support points?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025 msgid "Save changes?" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1168 msgid "" "Autogeneration will erase all manually edited points.\n" "\n" "Are you sure you want to do it?\n" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1170 src/slic3r/GUI/GUI.cpp:283 #: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328 msgid "Warning" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1202 msgid "SLA gizmo keyboard shortcuts" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235 msgid "Left click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231 msgid "Add point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232 msgid "Right click" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232 msgid "Remove point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237 msgid "Drag" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233 msgid "Move point" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234 msgid "Add point to selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235 msgid "Remove point from selection" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236 msgid "Select by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237 msgid "Deselect by rectangle" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1238 msgid "Select all points" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240 msgid "Mouse wheel" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240 msgid "Move clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1241 msgid "Reset clipping plane" msgstr "" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1244 msgid "Switch to editing mode" msgstr "" #: src/slic3r/GUI/GUI.cpp:142 src/slic3r/GUI/Tab.cpp:2810 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" #: src/slic3r/GUI/GUI.cpp:143 msgid "Please check and fix your object list." msgstr "" #: src/slic3r/GUI/GUI.cpp:144 src/slic3r/GUI/Tab.cpp:2812 msgid "Attention!" msgstr "" #: src/slic3r/GUI/GUI.cpp:277 msgid "Notice" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:390 msgid "Changing of an application language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:398 src/slic3r/GUI/GUI_App.cpp:407 msgid "Recreating" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:411 msgid "Loading of current presets" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:419 msgid "Loading of a mode view" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:501 msgid "Choose one file (3MF):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:513 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:526 msgid "Array of language names and identifiers should have the same size." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:536 msgid "Select the language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:536 msgid "Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:606 src/slic3r/GUI/GUI_ObjectList.cpp:1257 #: src/libslic3r/PrintConfig.cpp:300 msgid "Default" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:673 msgid "&Configuration Snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:673 msgid "Inspect / activate configuration snapshots" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:674 msgid "Take Configuration &Snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:674 msgid "Capture a configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:677 msgid "&Preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:683 msgid "Application preferences" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:686 src/slic3r/GUI/wxExtensions.cpp:2509 msgid "Simple" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:686 msgid "Simple View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:687 src/slic3r/GUI/GUI_ObjectList.cpp:85 #: src/slic3r/GUI/GUI_ObjectList.cpp:539 src/slic3r/GUI/Tab.cpp:1027 #: src/slic3r/GUI/Tab.cpp:1042 src/slic3r/GUI/Tab.cpp:1140 #: src/slic3r/GUI/Tab.cpp:1143 src/slic3r/GUI/Tab.cpp:1516 #: src/slic3r/GUI/Tab.cpp:1941 src/slic3r/GUI/Tab.cpp:3453 #: src/slic3r/GUI/wxExtensions.cpp:2510 src/libslic3r/PrintConfig.cpp:73 #: src/libslic3r/PrintConfig.cpp:188 src/libslic3r/PrintConfig.cpp:351 #: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:2200 msgid "Advanced" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:687 msgid "Advanced View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:688 src/slic3r/GUI/wxExtensions.cpp:2511 msgid "Expert" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:688 msgid "Expert View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:693 msgid "Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:693 #, possible-c-format msgid "%s View Mode" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:695 msgid "Change Application &Language" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:697 msgid "Flash printer &firmware" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:697 msgid "Upload a firmware image into an Arduino based printer" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:709 msgid "Taking configuration snapshot" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:709 msgid "Snapshot name" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:752 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" #: src/slic3r/GUI/GUI_App.cpp:754 msgid "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:755 msgid "Language selection" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:781 msgid "&Configuration" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:801 msgid "The following presets were modified" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:801 src/slic3r/GUI/Tab.cpp:2798 msgid "Discard changes and continue anyway?" msgstr "" #: src/slic3r/GUI/GUI_App.cpp:802 msgid "Unsaved Presets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:77 #: src/slic3r/GUI/GUI_ObjectList.cpp:531 src/libslic3r/PrintConfig.cpp:57 #: src/libslic3r/PrintConfig.cpp:151 src/libslic3r/PrintConfig.cpp:382 #: src/libslic3r/PrintConfig.cpp:439 src/libslic3r/PrintConfig.cpp:447 #: src/libslic3r/PrintConfig.cpp:843 src/libslic3r/PrintConfig.cpp:1027 #: src/libslic3r/PrintConfig.cpp:1330 src/libslic3r/PrintConfig.cpp:1396 #: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:2012 #: src/libslic3r/PrintConfig.cpp:2069 msgid "Layers and Perimeters" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:78 #: src/slic3r/GUI/GUI_ObjectList.cpp:532 src/slic3r/GUI/Plater.cpp:447 #: src/slic3r/GUI/Tab.cpp:1031 src/slic3r/GUI/Tab.cpp:1032 #: src/slic3r/GUI/Tab.cpp:1361 src/libslic3r/PrintConfig.cpp:168 #: src/libslic3r/PrintConfig.cpp:390 src/libslic3r/PrintConfig.cpp:730 #: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:781 #: src/libslic3r/PrintConfig.cpp:934 src/libslic3r/PrintConfig.cpp:944 #: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:980 #: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:1684 #: src/libslic3r/PrintConfig.cpp:1701 msgid "Infill" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:79 #: src/slic3r/GUI/GUI_ObjectList.cpp:533 src/slic3r/GUI/GUI_Preview.cpp:236 #: src/slic3r/GUI/Tab.cpp:1060 src/slic3r/GUI/Tab.cpp:1061 #: src/libslic3r/PrintConfig.cpp:335 src/libslic3r/PrintConfig.cpp:1457 #: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1811 #: src/libslic3r/PrintConfig.cpp:1819 src/libslic3r/PrintConfig.cpp:1831 #: src/libslic3r/PrintConfig.cpp:1841 src/libslic3r/PrintConfig.cpp:1849 #: src/libslic3r/PrintConfig.cpp:1864 src/libslic3r/PrintConfig.cpp:1885 #: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:1912 #: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1930 #: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:1955 #: src/libslic3r/PrintConfig.cpp:1963 src/libslic3r/PrintConfig.cpp:1964 #: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:1981 #: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/GCode/PreviewData.cpp:172 msgid "Support material" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:81 #: src/slic3r/GUI/GUI_ObjectList.cpp:535 src/slic3r/GUI/Tab.cpp:1120 #: src/slic3r/GUI/Tab.cpp:1845 src/libslic3r/PrintConfig.cpp:457 #: src/libslic3r/PrintConfig.cpp:955 src/libslic3r/PrintConfig.cpp:1365 #: src/libslic3r/PrintConfig.cpp:1693 src/libslic3r/PrintConfig.cpp:1877 #: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2176 #: src/libslic3r/PrintConfig.cpp:2184 msgid "Extruders" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:39 msgid "Pad and Support" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:45 msgid "Add part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:46 msgid "Add modifier" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:47 msgid "Add support enforcer" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:48 msgid "Add support blocker" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:80 src/slic3r/GUI/GUI_ObjectList.cpp:534 #: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1085 #: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:427 #: src/libslic3r/PrintConfig.cpp:872 src/libslic3r/PrintConfig.cpp:1000 #: src/libslic3r/PrintConfig.cpp:1386 src/libslic3r/PrintConfig.cpp:1623 #: src/libslic3r/PrintConfig.cpp:1672 src/libslic3r/PrintConfig.cpp:1723 #: src/libslic3r/PrintConfig.cpp:2054 msgid "Speed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:82 src/slic3r/GUI/GUI_ObjectList.cpp:536 #: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:524 #: src/libslic3r/PrintConfig.cpp:831 src/libslic3r/PrintConfig.cpp:963 #: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1713 #: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:2043 msgid "Extrusion Width" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:87 src/slic3r/GUI/GUI_ObjectList.cpp:541 #: src/slic3r/GUI/Plater.cpp:429 src/slic3r/GUI/Tab.cpp:3415 #: src/slic3r/GUI/Tab.cpp:3416 src/libslic3r/PrintConfig.cpp:2388 #: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:2404 #: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2423 #: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2456 #: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2477 #: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496 #: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2515 #: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2533 msgid "Supports" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:88 src/slic3r/GUI/GUI_ObjectList.cpp:542 #: src/slic3r/GUI/Tab.cpp:3443 src/slic3r/GUI/Tab.cpp:3444 #: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2548 #: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2572 #: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594 msgid "Pad" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:203 msgid "Name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:257 #, possible-c-format msgid "Auto-repaired (%d errors):\n" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:264 msgid "degenerate facets" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:265 msgid "edges fixed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:266 msgid "facets removed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:267 msgid "facets added" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:268 msgid "facets reversed" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:269 msgid "backwards edges" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:277 msgid "Right button click the icon to fix STL through Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:306 msgid "Right button click the icon to change the object settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:357 src/slic3r/GUI/GUI_ObjectList.cpp:378 #: src/slic3r/GUI/GUI_ObjectList.cpp:390 src/slic3r/GUI/GUI_ObjectList.cpp:2855 #: src/slic3r/GUI/GUI_ObjectList.cpp:2865 #: src/slic3r/GUI/GUI_ObjectList.cpp:2897 src/slic3r/GUI/wxExtensions.cpp:499 #: src/slic3r/GUI/wxExtensions.cpp:524 msgid "default" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:362 src/slic3r/GUI/Tab.cpp:1480 #: src/libslic3r/PrintConfig.cpp:456 msgid "Extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:876 src/slic3r/GUI/GUI_ObjectList.cpp:1151 #: src/slic3r/GUI/GUI_ObjectList.cpp:1157 #: src/slic3r/GUI/GUI_ObjectList.cpp:1389 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:939 msgid "Select showing settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1072 msgid "Load" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1077 #: src/slic3r/GUI/GUI_ObjectList.cpp:1102 #: src/slic3r/GUI/GUI_ObjectList.cpp:1105 msgid "Box" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1077 msgid "Cylinder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1077 msgid "Sphere" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1077 msgid "Slab" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1130 msgid "Add settings" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1197 msgid "Change type" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1204 #: src/slic3r/GUI/GUI_ObjectList.cpp:1343 msgid "Set as a Separated Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1212 msgid "Rename" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1222 msgid "Fix through the Netfabb" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1231 src/slic3r/GUI/Plater.cpp:2969 msgid "Export as STL" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1238 msgid "Change extruder" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1263 msgid "Select new extruder for the object/part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1343 msgid "Set as a Separated Objects" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1556 msgid "Generic" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1699 msgid "You can't delete the last solid part from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1716 msgid "You can't delete the last intance from object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1742 src/slic3r/GUI/Plater.cpp:2306 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1851 msgid "Group manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1863 msgid "Object manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1873 msgid "Object Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1877 msgid "Part Settings to modify" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1886 msgid "Part manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:1892 msgid "Instance manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2417 msgid "Object or Instance" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2417 msgid "Part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2419 msgid "Unsupported selection" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2420 #, possible-c-format msgid "You started your selection with %s Item." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2421 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2424 msgid "of a current Object" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2429 #: src/slic3r/GUI/GUI_ObjectList.cpp:2502 src/slic3r/GUI/Plater.cpp:118 msgid "Info" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2543 msgid "You can't change a type of the last solid part of the object." msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2550 msgid "Select type of part" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2714 msgid "Enter new name" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2714 msgid "Renaming" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2730 #: src/slic3r/GUI/GUI_ObjectList.cpp:2824 src/slic3r/GUI/Tab.cpp:3296 #: src/slic3r/GUI/Tab.cpp:3300 msgid "The supplied name is not valid;" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2731 #: src/slic3r/GUI/GUI_ObjectList.cpp:2825 src/slic3r/GUI/Tab.cpp:3297 msgid "the following characters are not allowed:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2845 msgid "Set extruder for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2846 msgid "Select extruder number for selected objects and/or parts" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2859 msgid "Select extruder number:" msgstr "" #: src/slic3r/GUI/GUI_ObjectList.cpp:2860 msgid "This extruder will be set for selected items" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:40 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:83 msgid "World coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:41 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84 msgid "Local coordinates" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60 msgid "Select coordinate space, in which the transformation will be performed." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:102 msgid "Object Manipulation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153 msgid "Object name" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:282 msgid "Position" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:283 msgid "Rotation" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284 msgid "Scale factors" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 msgid "Translate" msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:643 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:58 msgid "Additional Settings" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:209 msgid "View" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:537 #: src/libslic3r/GCode/PreviewData.cpp:394 msgid "Feature type" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:469 msgid "Height" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2162 msgid "Width" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:216 msgid "Volumetric flow rate" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:315 #: src/slic3r/GUI/GUI_Preview.cpp:481 src/slic3r/GUI/GUI_Preview.cpp:537 #: src/slic3r/GUI/GUI_Preview.cpp:713 src/libslic3r/GCode/PreviewData.cpp:404 msgid "Tool" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/GUI_Preview.cpp:535 #: src/libslic3r/GCode/PreviewData.cpp:406 msgid "Color Print" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:221 msgid "Show" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:225 msgid "Feature types" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/GCode/PreviewData.cpp:163 msgid "Perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/GCode/PreviewData.cpp:164 msgid "External perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/GCode/PreviewData.cpp:165 msgid "Overhang perimeter" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/GCode/PreviewData.cpp:166 msgid "Internal infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1712 #: src/libslic3r/PrintConfig.cpp:1722 src/libslic3r/GCode/PreviewData.cpp:167 msgid "Solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2042 #: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/GCode/PreviewData.cpp:168 msgid "Top solid infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/GCode/PreviewData.cpp:169 msgid "Bridge infill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:871 #: src/libslic3r/GCode/PreviewData.cpp:170 msgid "Gap fill" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1051 #: src/libslic3r/GCode/PreviewData.cpp:171 msgid "Skirt" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1929 #: src/libslic3r/GCode/PreviewData.cpp:173 msgid "Support material interface" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1131 #: src/libslic3r/GCode/PreviewData.cpp:174 msgid "Wipe tower" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2076 msgid "Travel" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:244 msgid "Retractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:245 msgid "Unretractions" msgstr "" #: src/slic3r/GUI/GUI_Preview.cpp:246 msgid "Shells" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:13 src/slic3r/GUI/MainFrame.cpp:571 msgid "Keyboard Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:105 msgid "Open project STL/OBJ/AMF/3MF with config, delete bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 msgid "Import STL/OBJ/AMF/3MF without config, keep bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:107 msgid "Load Config from .ini/amf/3mf/gcode" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:740 #: src/slic3r/GUI/Plater.cpp:3864 src/libslic3r/PrintConfig.cpp:2990 msgid "Export G-code" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Save project (3MF)" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:110 msgid "Load Config from .ini/amf/3mf/gcode and merge" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:111 msgid "(Re)slice" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 msgid "Select Plater Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:116 msgid "Select Print Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:117 msgid "Select Filament Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:118 msgid "Select Printer Settings Tab" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:119 msgid "Switch to 3D" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 msgid "Switch to Preview" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:121 src/slic3r/GUI/Preferences.cpp:10 msgid "Preferences" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 #: src/slic3r/GUI/PrintHostDialogs.cpp:135 msgid "Print host upload queue" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 msgid "Camera view" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:124 msgid "Add Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:125 msgid "Remove Instance of the selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:126 msgid "Show keyboard shortcuts list" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 msgid "Press to select multiple object or move multiple object with mouse" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 msgid "Main Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Select All objects" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Delete selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Delete All" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Copy to clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:140 msgid "Paste from clipboard" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:142 msgid "Gizmo scale" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Gizmo rotate" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Gizmo cut" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:145 msgid "Gizmo Place face on bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Gizmo SLA support points" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 #, possible-c-format msgid "" "Press to snap by 5% in Gizmo scale\n" "or by 1mm in Gizmo move" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:148 msgid "" "Press to scale or rotate selected objects\n" "around their own center" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:149 msgid "Zoom to Bed" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:150 msgid "Zoom to all objects in scene, if none selected" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:151 msgid "Zoom to selected object" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:152 msgid "Zoom in" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:153 msgid "Zoom out" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:154 msgid "Unselect gizmo, keep object selection" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:156 msgid "Plater Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 #: src/slic3r/GUI/KBShortcutsDialog.cpp:182 msgid "Arrow Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:171 #: src/slic3r/GUI/KBShortcutsDialog.cpp:173 msgid "Upper Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 #: src/slic3r/GUI/KBShortcutsDialog.cpp:183 msgid "Arrow Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:172 #: src/slic3r/GUI/KBShortcutsDialog.cpp:174 msgid "Lower Layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:176 msgid "Preview Shortcuts" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:182 msgid "Move current slider thumb Up" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:183 msgid "Move current slider thumb Down" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:184 msgid "Arrow Left" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:184 msgid "Set upper thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "Arrow Right" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:185 msgid "Set lower thumb to current slider thumb" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:186 msgid "Add color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:187 msgid "Delete color change marker for current layer" msgstr "" #: src/slic3r/GUI/KBShortcutsDialog.cpp:189 msgid "Layers Slider Shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:61 msgid "" " - Remember to check for updates at http://github.com/prusa3d/slic3r/releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:163 msgid "Plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:344 msgid "&Open Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:344 msgid "Open a project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:346 msgid "&Save Project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:346 msgid "Save current project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:348 msgid "Save Project &as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:348 msgid "Save current project file as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:354 msgid "Import STL/OBJ/AM&F/3MF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:354 msgid "Load a model" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:357 msgid "Import &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:357 msgid "Load exported configuration file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:359 msgid "Import Config from &project" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:359 msgid "Load configuration from project file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:362 msgid "Import Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:362 msgid "Load presets from a bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:364 msgid "&Import" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:367 src/slic3r/GUI/MainFrame.cpp:607 msgid "Export &G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:367 msgid "Export current plate as G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:371 msgid "Export plate as &STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:371 msgid "Export current plate as STL" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:373 msgid "Export plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:373 msgid "Export current plate as STL including supports" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:375 msgid "Export plate as &AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:375 msgid "Export current plate as AMF" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:378 msgid "Export &Config" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:378 msgid "Export current configuration to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:380 msgid "Export Config &Bundle" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:380 msgid "Export all presets to file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:382 msgid "&Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:388 msgid "Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:388 msgid "Slice a file into a G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:394 msgid "Quick Slice and Save As" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:394 msgid "Slice a file into a G-code, save as" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:400 msgid "Repeat Last Quick Slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:400 msgid "Repeat last quick slice" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:408 msgid "(Re)Slice &Now" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:408 msgid "Start new slicing process" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:411 msgid "&Repair STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:411 msgid "Automatically repair an STL file" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:414 msgid "&Quit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:414 #, possible-c-format msgid "Quit %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:449 msgid "&Select all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:449 msgid "Selects all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:452 msgid "&Delete selected" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:452 msgid "Deletes the current selection" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:454 msgid "Delete &all" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:454 msgid "Deletes all objects" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:459 msgid "&Copy" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:459 msgid "Copy selection to clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:461 msgid "&Paste" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:461 msgid "Paste clipboard" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:476 msgid "&Plater Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:476 msgid "Show the plater" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:483 msgid "P&rint Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:483 msgid "Show the print settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:485 src/slic3r/GUI/MainFrame.cpp:609 msgid "&Filament Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:485 msgid "Show the filament settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:488 msgid "Print&er Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:488 msgid "Show the printer settings" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:492 msgid "3&D" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:492 msgid "Show the 3D editing view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:494 msgid "Pre&view" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:494 msgid "Show the 3D slices preview" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:515 msgid "Print &Host Upload Queue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:515 msgid "Display the Print Host Upload Queue window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:524 msgid "Iso" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:524 msgid "Iso View" msgstr "" #. TRN To be shown in the main menu View->Top #: src/slic3r/GUI/MainFrame.cpp:527 msgctxt "Layers" msgid "Top" msgstr "" #. TRN To be shown in Print Settings "Top solid layers" #: src/libslic3r/PrintConfig.cpp:2068 msgid "Top" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:527 msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom #: src/slic3r/GUI/MainFrame.cpp:529 msgid "Bottom" msgstr "" #. TRN To be shown in Print Settings "Bottom solid layers" #: src/libslic3r/PrintConfig.cpp:150 msgctxt "Layers" msgid "Bottom" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:529 msgid "Bottom View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:530 msgid "Front" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:530 msgid "Front View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:531 src/libslic3r/PrintConfig.cpp:1587 msgid "Rear" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:531 msgid "Rear View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:532 msgid "Left" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:532 msgid "Left View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:533 msgid "Right" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:533 msgid "Right View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:547 msgid "Prusa 3D &Drivers" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:547 msgid "Open the Prusa3D drivers download page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:549 msgid "Prusa Edition &Releases" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:549 msgid "Open the Prusa Edition releases page in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:555 #, possible-c-format msgid "%s &Website" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:556 #, possible-c-format msgid "Open the %s website in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:558 #, possible-c-format msgid "%s &Manual" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:559 #, possible-c-format msgid "Open the %s manual in your browser" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:562 msgid "System &Info" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:562 msgid "Show system information" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:564 msgid "Show &Configuration Folder" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:564 msgid "Show user configuration folder (datadir)" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:566 msgid "Report an I&ssue" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:566 #, possible-c-format msgid "Report an issue on %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:568 #, possible-c-format msgid "&About %s" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:568 msgid "Show about dialog" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:571 msgid "Show the list of the keyboard shortcuts" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:579 msgid "&File" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:580 msgid "&Edit" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:581 msgid "&Window" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:582 msgid "&View" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:585 msgid "&Help" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:3864 msgid "Export" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:609 msgid "Mate&rial Settings Tab" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:630 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:644 msgid "No previously sliced file." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:645 src/slic3r/GUI/PrintHostDialogs.cpp:230 msgid "Error" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:650 msgid "Previously sliced file (" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:650 msgid ") not found." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:651 msgid "File Not Found" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:686 src/slic3r/GUI/Tab.cpp:3257 msgid "Save " msgstr "" #: src/slic3r/GUI/MainFrame.cpp:686 msgid "SVG" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:686 msgid "G-code" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:686 msgid " file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:701 msgid "Save zip file as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:713 src/slic3r/GUI/Plater.cpp:2439 #: src/slic3r/GUI/Plater.cpp:3658 src/slic3r/GUI/Tab.cpp:1160 #: src/slic3r/GUI/Tab.cpp:3454 msgid "Slicing" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:713 msgid "Processing " msgstr "" #: src/slic3r/GUI/MainFrame.cpp:736 msgid " was successfully sliced." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:738 msgid "Slicing Done!" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:753 msgid "Select the STL file to repair:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:766 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:781 msgid "Your file was repaired." msgstr "" #: src/slic3r/GUI/MainFrame.cpp:781 src/libslic3r/PrintConfig.cpp:3084 msgid "Repair" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:795 msgid "Save configuration as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:815 src/slic3r/GUI/MainFrame.cpp:879 msgid "Select configuration to load:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:852 msgid "Save presets bundle as:" msgstr "" #: src/slic3r/GUI/MainFrame.cpp:903 #, possible-c-format msgid "%d presets successfully imported." msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:73 #, possible-c-format msgid "%s error" msgstr "" #: src/slic3r/GUI/MsgDialog.cpp:74 #, possible-c-format msgid "%s has encountered an error" msgstr "" #: src/slic3r/GUI/Plater.cpp:138 msgid "Volume" msgstr "" #: src/slic3r/GUI/Plater.cpp:139 msgid "Facets" msgstr "" #: src/slic3r/GUI/Plater.cpp:140 msgid "Materials" msgstr "" #: src/slic3r/GUI/Plater.cpp:143 msgid "Manifold" msgstr "" #: src/slic3r/GUI/Plater.cpp:193 msgid "Sliced Info" msgstr "" #: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:1048 msgid "Used Filament (m)" msgstr "" #: src/slic3r/GUI/Plater.cpp:213 msgid "Used Filament (mm³)" msgstr "" #: src/slic3r/GUI/Plater.cpp:214 msgid "Used Filament (g)" msgstr "" #: src/slic3r/GUI/Plater.cpp:215 msgid "Used Material (unit)" msgstr "" #: src/slic3r/GUI/Plater.cpp:216 src/slic3r/GUI/Plater.cpp:1063 #: src/libslic3r/PrintConfig.cpp:718 msgid "Cost" msgstr "" #: src/slic3r/GUI/Plater.cpp:217 src/slic3r/GUI/Plater.cpp:1035 #: src/slic3r/GUI/Plater.cpp:1077 msgid "Estimated printing time" msgstr "" #: src/slic3r/GUI/Plater.cpp:218 msgid "Number of tool changes" msgstr "" #: src/slic3r/GUI/Plater.cpp:292 msgid "Click to edit preset" msgstr "" #: src/slic3r/GUI/Plater.cpp:432 msgid "Select what kind of support do you need" msgstr "" #: src/slic3r/GUI/Plater.cpp:434 src/libslic3r/PrintConfig.cpp:1840 #: src/libslic3r/PrintConfig.cpp:2448 msgid "Support on build plate only" msgstr "" #: src/slic3r/GUI/Plater.cpp:435 src/slic3r/GUI/Plater.cpp:528 msgid "For support enforcers only" msgstr "" #: src/slic3r/GUI/Plater.cpp:436 msgid "Everywhere" msgstr "" #: src/slic3r/GUI/Plater.cpp:454 src/slic3r/GUI/Tab.cpp:1057 msgid "Brim" msgstr "" #: src/slic3r/GUI/Plater.cpp:456 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "" #: src/slic3r/GUI/Plater.cpp:464 msgid "Purging volumes" msgstr "" #: src/slic3r/GUI/Plater.cpp:688 msgid "Print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:689 src/slic3r/GUI/Tab.cpp:1471 #: src/slic3r/GUI/Tab.cpp:1472 msgid "Filament" msgstr "" #: src/slic3r/GUI/Plater.cpp:690 msgid "SLA print settings" msgstr "" #: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Preset.cpp:1277 msgid "SLA material" msgstr "" #: src/slic3r/GUI/Plater.cpp:692 msgid "Printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:738 src/slic3r/GUI/Plater.cpp:3865 msgid "Send to printer" msgstr "" #: src/slic3r/GUI/Plater.cpp:741 src/slic3r/GUI/Plater.cpp:2439 #: src/slic3r/GUI/Plater.cpp:3661 msgid "Slice now" msgstr "" #: src/slic3r/GUI/Plater.cpp:880 msgid "Hold Shift to Slice & Export G-code" msgstr "" #: src/slic3r/GUI/Plater.cpp:981 #, possible-c-format msgid "%d (%d shells)" msgstr "" #: src/slic3r/GUI/Plater.cpp:986 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "" #: src/slic3r/GUI/Plater.cpp:989 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" #: src/slic3r/GUI/Plater.cpp:999 msgid "Yes" msgstr "" #: src/slic3r/GUI/Plater.cpp:1022 msgid "Used Material (ml)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1025 msgid "object(s)" msgstr "" #: src/slic3r/GUI/Plater.cpp:1025 msgid "supports and pad" msgstr "" #: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065 msgid "objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065 msgid "wipe tower" msgstr "" #: src/slic3r/GUI/Plater.cpp:1080 msgid "normal mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1084 msgid "stealth mode" msgstr "" #: src/slic3r/GUI/Plater.cpp:1604 msgid "Loading" msgstr "" #: src/slic3r/GUI/Plater.cpp:1614 #, possible-c-format msgid "Processing input file %s\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:1672 msgid "" "This file contains several objects positioned at multiple heights. Instead " "of considering them as multiple objects, should I consider\n" "this file as a single object having multiple parts?\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:1675 src/slic3r/GUI/Plater.cpp:1783 msgid "Multi-part object detected" msgstr "" #: src/slic3r/GUI/Plater.cpp:1726 msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:1727 msgid "Detected advanced data" msgstr "" #: src/slic3r/GUI/Plater.cpp:1760 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" #: src/slic3r/GUI/Plater.cpp:1780 msgid "" "Multiple objects were loaded for a multi-material printer.\n" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?\n" msgstr "" #: src/slic3r/GUI/Plater.cpp:1796 msgid "Loaded" msgstr "" #: src/slic3r/GUI/Plater.cpp:1894 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" #: src/slic3r/GUI/Plater.cpp:1895 msgid "Object too large?" msgstr "" #: src/slic3r/GUI/Plater.cpp:1945 msgid "Export STL file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:1952 msgid "Export AMF file:" msgstr "" #: src/slic3r/GUI/Plater.cpp:1958 msgid "Save file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:2123 msgid "Arranging canceled" msgstr "" #: src/slic3r/GUI/Plater.cpp:2126 msgid "Arranging" msgstr "" #: src/slic3r/GUI/Plater.cpp:2163 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" #: src/slic3r/GUI/Plater.cpp:2170 msgid "Arranging done." msgstr "" #: src/slic3r/GUI/Plater.cpp:2211 msgid "Orientation search canceled" msgstr "" #: src/slic3r/GUI/Plater.cpp:2216 msgid "Searching for optimal orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:2278 msgid "Orientation found." msgstr "" #: src/slic3r/GUI/Plater.cpp:2298 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "" #: src/slic3r/GUI/Plater.cpp:2424 msgid "Invalid data" msgstr "" #: src/slic3r/GUI/Plater.cpp:2433 msgid "Ready to slice" msgstr "" #: src/slic3r/GUI/Plater.cpp:2471 src/slic3r/GUI/PrintHostDialogs.cpp:231 msgid "Cancelling" msgstr "" #: src/slic3r/GUI/Plater.cpp:2488 msgid "Another export job is currently running." msgstr "" #: src/slic3r/GUI/Plater.cpp:2749 msgid "Export failed" msgstr "" #: src/slic3r/GUI/Plater.cpp:2754 src/slic3r/GUI/PrintHostDialogs.cpp:232 msgid "Cancelled" msgstr "" #: src/slic3r/GUI/Plater.cpp:2840 src/slic3r/GUI/Plater.cpp:2852 #: src/slic3r/GUI/Plater.cpp:2939 msgid "Increase copies" msgstr "" #: src/slic3r/GUI/Plater.cpp:2933 src/slic3r/GUI/Plater.cpp:2951 msgid "Remove the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2939 msgid "Place one more copy of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2941 msgid "Decrease copies" msgstr "" #: src/slic3r/GUI/Plater.cpp:2941 msgid "Remove one copy of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2943 msgid "Set number of copies" msgstr "" #: src/slic3r/GUI/Plater.cpp:2943 msgid "Change the number of copies of the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:2966 msgid "Reload from Disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:2966 msgid "Reload the selected file from Disk" msgstr "" #: src/slic3r/GUI/Plater.cpp:2969 msgid "Export the selected object as STL file" msgstr "" #: src/slic3r/GUI/Plater.cpp:2981 msgid "Along X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:2981 msgid "Mirror the selected object along the X axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:2983 msgid "Along Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:2983 msgid "Mirror the selected object along the Y axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:2985 msgid "Along Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:2985 msgid "Mirror the selected object along the Z axis" msgstr "" #: src/slic3r/GUI/Plater.cpp:2988 msgid "Mirror" msgstr "" #: src/slic3r/GUI/Plater.cpp:2988 msgid "Mirror the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3008 msgid "To objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3008 src/slic3r/GUI/Plater.cpp:3030 msgid "Split the selected object into individual objects" msgstr "" #: src/slic3r/GUI/Plater.cpp:3010 msgid "To parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3010 src/slic3r/GUI/Plater.cpp:3050 msgid "Split the selected object into individual sub-parts" msgstr "" #: src/slic3r/GUI/Plater.cpp:3013 src/slic3r/GUI/Plater.cpp:3030 #: src/slic3r/GUI/Plater.cpp:3050 src/libslic3r/PrintConfig.cpp:3108 msgid "Split" msgstr "" #: src/slic3r/GUI/Plater.cpp:3013 msgid "Split the selected object" msgstr "" #: src/slic3r/GUI/Plater.cpp:3036 msgid "Optimize orientation" msgstr "" #: src/slic3r/GUI/Plater.cpp:3036 msgid "Optimize the rotation of the object for better print results." msgstr "" #: src/slic3r/GUI/Plater.cpp:3099 msgid "3D editor view" msgstr "" #: src/slic3r/GUI/Plater.cpp:3110 src/slic3r/GUI/Tab.cpp:2289 msgid "Preview" msgstr "" #: src/slic3r/GUI/Plater.cpp:3341 msgid "All objects will be removed, continue ?" msgstr "" #: src/slic3r/GUI/Plater.cpp:3476 msgid "Save G-code file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3476 msgid "Save SL1 file as:" msgstr "" #: src/slic3r/GUI/Plater.cpp:3588 #, possible-c-format msgid "STL file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:3604 #, possible-c-format msgid "AMF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:3607 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:3633 #, possible-c-format msgid "3MF file exported to %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:3636 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "" #: src/slic3r/GUI/Plater.cpp:3865 msgid "Send G-code" msgstr "" #: src/slic3r/GUI/Preferences.cpp:19 src/slic3r/GUI/Tab.cpp:1813 #: src/slic3r/GUI/Tab.cpp:2014 msgid "General" msgstr "" #: src/slic3r/GUI/Preferences.cpp:36 msgid "Remember output directory" msgstr "" #: src/slic3r/GUI/Preferences.cpp:38 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" #: src/slic3r/GUI/Preferences.cpp:44 msgid "Auto-center parts" msgstr "" #: src/slic3r/GUI/Preferences.cpp:46 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" #: src/slic3r/GUI/Preferences.cpp:52 msgid "Background processing" msgstr "" #: src/slic3r/GUI/Preferences.cpp:54 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" #: src/slic3r/GUI/Preferences.cpp:63 msgid "If enabled, Slic3r checks for new versions of " msgstr "" #: src/slic3r/GUI/Preferences.cpp:71 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" #: src/slic3r/GUI/Preferences.cpp:76 msgid "Suppress \" - default - \" presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:78 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" #: src/slic3r/GUI/Preferences.cpp:84 msgid "Show incompatible print and filament presets" msgstr "" #: src/slic3r/GUI/Preferences.cpp:86 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" #: src/slic3r/GUI/Preferences.cpp:93 msgid "Use legacy OpenGL 1.1 rendering" msgstr "" #: src/slic3r/GUI/Preferences.cpp:95 msgid "" "If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may " "try to check this checkbox. This will disable the layer height editing and " "anti aliasing, so it is likely better to upgrade your graphics driver." msgstr "" #: src/slic3r/GUI/Preferences.cpp:103 msgid "Use Retina resolution for the 3D scene" msgstr "" #: src/slic3r/GUI/Preferences.cpp:105 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" #: src/slic3r/GUI/Preferences.cpp:130 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "" #: src/slic3r/GUI/Preset.cpp:207 msgid "modified" msgstr "" #: src/slic3r/GUI/Preset.cpp:930 src/slic3r/GUI/Preset.cpp:970 #: src/slic3r/GUI/Preset.cpp:1035 src/slic3r/GUI/Preset.cpp:1067 #: src/slic3r/GUI/PresetBundle.cpp:1488 src/slic3r/GUI/PresetBundle.cpp:1553 msgid "System presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:974 src/slic3r/GUI/Preset.cpp:1071 #: src/slic3r/GUI/PresetBundle.cpp:1558 msgid "User presets" msgstr "" #: src/slic3r/GUI/Preset.cpp:1003 src/slic3r/GUI/Tab.cpp:238 msgid "Add a new printer" msgstr "" #: src/slic3r/GUI/Preset.cpp:1275 src/slic3r/GUI/Tab.hpp:333 msgid "filament" msgstr "" #: src/slic3r/GUI/Preset.cpp:1276 msgid "SLA print" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:28 #, possible-c-format msgid "" "If estimated layer time is below ~%ds, fan will run at %d%% and print speed " "will be reduced so that no less than %ds are spent on that layer (however, " "speed will never be reduced below %dmm/s)." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:32 #, possible-c-format msgid "" "\n" "If estimated layer time is greater, but still below ~%ds, fan will run at a " "proportionally decreasing speed between %d%% and %d%%." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:36 msgid "" "\n" "During the other layers, fan " msgstr "" #: src/slic3r/GUI/PresetHints.cpp:38 msgid "Fan " msgstr "" #: src/slic3r/GUI/PresetHints.cpp:43 #, possible-c-format msgid "will always run at %d%% " msgstr "" #: src/slic3r/GUI/PresetHints.cpp:46 #, possible-c-format msgid "except for the first %d layers" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:50 msgid "except for the first layer" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:52 msgid "will be turned off." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:153 msgid "external perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:162 msgid "perimeters" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:171 msgid "infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:181 msgid "solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:189 msgid "top solid infill" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:200 msgid "support" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:210 msgid "support interface" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:216 msgid "First layer volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:216 msgid "Bridging volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:216 msgid "Volumetric" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:217 msgid " flow rate is maximized " msgstr "" #: src/slic3r/GUI/PresetHints.cpp:220 msgid "by the print profile maximum" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:221 msgid "when printing " msgstr "" #: src/slic3r/GUI/PresetHints.cpp:222 msgid " with a volumetric rate " msgstr "" #: src/slic3r/GUI/PresetHints.cpp:226 #, possible-c-format msgid "%3.2f mm³/s" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:228 #, possible-c-format msgid " at filament speed %3.2f mm/s." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:247 msgid "" "Recommended object thin wall thickness: Not available due to invalid layer " "height." msgstr "" #: src/slic3r/GUI/PresetHints.cpp:264 #, possible-c-format msgid "Recommended object thin wall thickness for layer height %.2f and " msgstr "" #: src/slic3r/GUI/PresetHints.cpp:271 #, possible-c-format msgid "%d lines: %.2lf mm" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Send G-Code to printer host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:33 msgid "Upload to Printer Host with the following filename:" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Start printing after upload" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:42 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:148 msgid "ID" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:149 msgid "Progress" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:150 msgid "Status" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:151 msgid "Host" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:152 msgid "Filename" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:153 msgid "Error Message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:156 msgid "Cancel selected" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:158 msgid "Show error message" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:197 #: src/slic3r/GUI/PrintHostDialogs.cpp:228 msgid "Enqueued" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:229 msgid "Uploading" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:233 msgid "Completed" msgstr "" #: src/slic3r/GUI/PrintHostDialogs.cpp:271 msgid "Error uploading to print host:" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81 #: src/slic3r/GUI/WipeTowerDialog.cpp:82 src/libslic3r/PrintConfig.cpp:613 #: src/libslic3r/PrintConfig.cpp:657 src/libslic3r/PrintConfig.cpp:672 #: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:2277 #: src/libslic3r/PrintConfig.cpp:2337 src/libslic3r/PrintConfig.cpp:2344 msgid "s" msgstr "" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "" #: src/slic3r/GUI/SysInfoDialog.cpp:44 msgid "System Information" msgstr "" #: src/slic3r/GUI/Tab.cpp:51 src/libslic3r/PrintConfig.cpp:230 msgid "Compatible printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:52 msgid "Select the printers this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:57 src/libslic3r/PrintConfig.cpp:245 msgid "Compatible print profiles" msgstr "" #: src/slic3r/GUI/Tab.cpp:58 msgid "Select the print profiles this profile is compatible with." msgstr "" #: src/slic3r/GUI/Tab.cpp:131 msgid "Save current " msgstr "" #: src/slic3r/GUI/Tab.cpp:132 msgid "Delete this preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:137 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" #: src/slic3r/GUI/Tab.cpp:915 msgid "It's a default preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:916 msgid "It's a system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:917 msgid "Current preset is inherited from " msgstr "" #: src/slic3r/GUI/Tab.cpp:922 msgid "It can't be deleted or modified. " msgstr "" #: src/slic3r/GUI/Tab.cpp:923 msgid "" "Any modifications should be saved as a new preset inherited from this one. " msgstr "" #: src/slic3r/GUI/Tab.cpp:924 msgid "To do that please specify a new name for the preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:928 msgid "Additional information:" msgstr "" #: src/slic3r/GUI/Tab.cpp:934 msgid "printer model" msgstr "" #: src/slic3r/GUI/Tab.cpp:942 msgid "default print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:945 msgid "default filament profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:959 msgid "default SLA material profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:963 msgid "default SLA print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:998 src/slic3r/GUI/Tab.cpp:3409 msgid "Layers and perimeters" msgstr "" #: src/slic3r/GUI/Tab.cpp:999 src/libslic3r/PrintConfig.cpp:56 msgid "Layer height" msgstr "" #: src/slic3r/GUI/Tab.cpp:1003 msgid "Vertical shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1014 msgid "Horizontal shells" msgstr "" #: src/slic3r/GUI/Tab.cpp:1015 src/libslic3r/PrintConfig.cpp:1735 msgid "Solid layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1020 msgid "Quality (slower slicing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1038 msgid "Reducing printing time" msgstr "" #: src/slic3r/GUI/Tab.cpp:1050 msgid "Skirt and brim" msgstr "" #: src/slic3r/GUI/Tab.cpp:1067 msgid "Raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1071 msgid "Options for support material and raft" msgstr "" #: src/slic3r/GUI/Tab.cpp:1086 msgid "Speed for print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1098 msgid "Speed for non-print moves" msgstr "" #: src/slic3r/GUI/Tab.cpp:1101 msgid "Modifiers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1104 msgid "Acceleration control (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1111 msgid "Autospeed (advanced)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1119 msgid "Multiple Extruders" msgstr "" #: src/slic3r/GUI/Tab.cpp:1127 msgid "Ooze prevention" msgstr "" #: src/slic3r/GUI/Tab.cpp:1144 msgid "Extrusion width" msgstr "" #: src/slic3r/GUI/Tab.cpp:1154 msgid "Overlap" msgstr "" #: src/slic3r/GUI/Tab.cpp:1157 msgid "Flow" msgstr "" #: src/slic3r/GUI/Tab.cpp:1166 msgid "Other" msgstr "" #: src/slic3r/GUI/Tab.cpp:1169 src/slic3r/GUI/Tab.cpp:3457 msgid "Output options" msgstr "" #: src/slic3r/GUI/Tab.cpp:1170 msgid "Sequential printing" msgstr "" #: src/slic3r/GUI/Tab.cpp:1172 msgid "Extruder clearance (mm)" msgstr "" #: src/slic3r/GUI/Tab.cpp:1181 src/slic3r/GUI/Tab.cpp:3458 msgid "Output file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1188 src/libslic3r/PrintConfig.cpp:1408 msgid "Post-processing scripts" msgstr "" #: src/slic3r/GUI/Tab.cpp:1194 src/slic3r/GUI/Tab.cpp:1195 #: src/slic3r/GUI/Tab.cpp:1577 src/slic3r/GUI/Tab.cpp:1578 #: src/slic3r/GUI/Tab.cpp:1986 src/slic3r/GUI/Tab.cpp:1987 #: src/slic3r/GUI/Tab.cpp:2080 src/slic3r/GUI/Tab.cpp:2081 #: src/slic3r/GUI/Tab.cpp:3346 src/slic3r/GUI/Tab.cpp:3347 msgid "Notes" msgstr "" #: src/slic3r/GUI/Tab.cpp:1201 src/slic3r/GUI/Tab.cpp:1585 #: src/slic3r/GUI/Tab.cpp:1993 src/slic3r/GUI/Tab.cpp:2087 #: src/slic3r/GUI/Tab.cpp:3354 src/slic3r/GUI/Tab.cpp:3463 msgid "Dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1202 src/slic3r/GUI/Tab.cpp:1586 #: src/slic3r/GUI/Tab.cpp:1994 src/slic3r/GUI/Tab.cpp:2088 #: src/slic3r/GUI/Tab.cpp:3355 src/slic3r/GUI/Tab.cpp:3464 msgid "Profile dependencies" msgstr "" #: src/slic3r/GUI/Tab.cpp:1248 #, possible-c-format msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- no ensure_vertical_shell_thickness\n" "\n" "Shall I adjust those settings in order to enable Spiral Vase?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1255 msgid "Spiral Vase" msgstr "" #: src/slic3r/GUI/Tab.cpp:1278 msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool " "change.\n" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0).\n" "\n" "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1282 src/slic3r/GUI/Tab.cpp:1299 msgid "Wipe Tower" msgstr "" #: src/slic3r/GUI/Tab.cpp:1296 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers.\n" "\n" "Shall I synchronize support layers in order to enable the Wipe Tower?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1314 msgid "" "Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters\n" "\n" "Shall I adjust those settings for supports?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1317 msgid "Support Generator" msgstr "" #: src/slic3r/GUI/Tab.cpp:1359 msgid "The " msgstr "" #: src/slic3r/GUI/Tab.cpp:1359 #, possible-c-format msgid "" " infill pattern is not supposed to work at 100% density.\n" "\n" "Shall I switch to rectilinear fill pattern?" msgstr "" #: src/slic3r/GUI/Tab.cpp:1479 msgid "Temperature " msgstr "" #: src/slic3r/GUI/Tab.cpp:1485 msgid "Bed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1490 msgid "Cooling" msgstr "" #: src/slic3r/GUI/Tab.cpp:1491 src/libslic3r/PrintConfig.cpp:1311 #: src/libslic3r/PrintConfig.cpp:2124 msgid "Enable" msgstr "" #: src/slic3r/GUI/Tab.cpp:1502 msgid "Fan settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1503 msgid "Fan speed" msgstr "" #: src/slic3r/GUI/Tab.cpp:1511 msgid "Cooling thresholds" msgstr "" #: src/slic3r/GUI/Tab.cpp:1517 msgid "Filament properties" msgstr "" #: src/slic3r/GUI/Tab.cpp:1521 msgid "Print speed override" msgstr "" #: src/slic3r/GUI/Tab.cpp:1531 msgid "Toolchange parameters with single extruder MM printers" msgstr "" #: src/slic3r/GUI/Tab.cpp:1546 msgid "Ramming settings" msgstr "" #: src/slic3r/GUI/Tab.cpp:1564 src/slic3r/GUI/Tab.cpp:1949 msgid "Custom G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1565 src/slic3r/GUI/Tab.cpp:1950 #: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1776 msgid "Start G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1571 src/slic3r/GUI/Tab.cpp:1956 #: src/libslic3r/PrintConfig.cpp:360 src/libslic3r/PrintConfig.cpp:370 msgid "End G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1701 src/slic3r/GUI/Tab.cpp:1889 msgid "Test" msgstr "" #: src/slic3r/GUI/Tab.cpp:1711 msgid "Could not get a valid Printer Host reference" msgstr "" #: src/slic3r/GUI/Tab.cpp:1717 src/slic3r/GUI/Tab.cpp:1902 msgid "Success!" msgstr "" #: src/slic3r/GUI/Tab.cpp:1732 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" #: src/slic3r/GUI/Tab.cpp:1738 msgid " Browse " msgstr "" #: src/slic3r/GUI/Tab.cpp:1745 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" #: src/slic3r/GUI/Tab.cpp:1746 msgid "Open CA certificate file" msgstr "" #: src/slic3r/GUI/Tab.cpp:1774 #, possible-c-format msgid "" "HTTPS CA File:\n" " \tOn this system, %s uses HTTPS certificates from the system Certificate " "Store or Keychain.\n" " \tTo use a custom CA file, please import your CA file into Certificate " "Store / Keychain." msgstr "" #: src/slic3r/GUI/Tab.cpp:1814 src/slic3r/GUI/Tab.cpp:2015 msgid "Size and coordinates" msgstr "" #: src/slic3r/GUI/Tab.cpp:1819 src/slic3r/GUI/Tab.cpp:2020 #: src/slic3r/GUI/Tab.cpp:3002 msgid " Set " msgstr "" #: src/slic3r/GUI/Tab.cpp:1841 msgid "Capabilities" msgstr "" #: src/slic3r/GUI/Tab.cpp:1846 msgid "Number of extruders of the printer." msgstr "" #: src/slic3r/GUI/Tab.cpp:1874 msgid "USB/Serial connection" msgstr "" #: src/slic3r/GUI/Tab.cpp:1875 src/libslic3r/PrintConfig.cpp:1616 msgid "Serial port" msgstr "" #: src/slic3r/GUI/Tab.cpp:1880 msgid "Rescan serial ports" msgstr "" #: src/slic3r/GUI/Tab.cpp:1902 msgid "Connection to printer works correctly." msgstr "" #: src/slic3r/GUI/Tab.cpp:1905 msgid "Connection failed." msgstr "" #: src/slic3r/GUI/Tab.cpp:1918 src/slic3r/GUI/Tab.cpp:2075 msgid "Print Host upload" msgstr "" #: src/slic3r/GUI/Tab.cpp:1962 src/libslic3r/PrintConfig.cpp:129 msgid "Before layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1968 src/libslic3r/PrintConfig.cpp:1032 msgid "After layer change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1974 src/libslic3r/PrintConfig.cpp:2031 msgid "Tool change G-code" msgstr "" #: src/slic3r/GUI/Tab.cpp:1980 msgid "Between objects G-code (for sequential printing)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2042 msgid "Display" msgstr "" #: src/slic3r/GUI/Tab.cpp:2053 msgid "Tilt" msgstr "" #: src/slic3r/GUI/Tab.cpp:2054 msgid "Tilt time" msgstr "" #: src/slic3r/GUI/Tab.cpp:2060 src/slic3r/GUI/Tab.cpp:3328 msgid "Corrections" msgstr "" #: src/slic3r/GUI/Tab.cpp:2137 src/slic3r/GUI/Tab.cpp:2210 #: src/libslic3r/PrintConfig.cpp:1082 src/libslic3r/PrintConfig.cpp:1100 #: src/libslic3r/PrintConfig.cpp:1118 src/libslic3r/PrintConfig.cpp:1135 #: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1157 #: src/libslic3r/PrintConfig.cpp:1168 msgid "Machine limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2151 msgid "Values in this column are for Normal mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2152 msgid "Normal" msgstr "" #: src/slic3r/GUI/Tab.cpp:2157 msgid "Values in this column are for Stealth mode" msgstr "" #: src/slic3r/GUI/Tab.cpp:2158 msgid "Stealth" msgstr "" #: src/slic3r/GUI/Tab.cpp:2166 msgid "Maximum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2171 msgid "Maximum accelerations" msgstr "" #: src/slic3r/GUI/Tab.cpp:2178 msgid "Jerk limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2183 msgid "Minimum feedrates" msgstr "" #: src/slic3r/GUI/Tab.cpp:2232 src/slic3r/GUI/Tab.cpp:2240 msgid "Single extruder MM setup" msgstr "" #: src/slic3r/GUI/Tab.cpp:2241 msgid "Single extruder multimaterial parameters" msgstr "" #: src/slic3r/GUI/Tab.cpp:2254 src/libslic3r/GCode/PreviewData.cpp:475 #, possible-c-format msgid "Extruder %d" msgstr "" #: src/slic3r/GUI/Tab.cpp:2261 msgid "Layer height limits" msgstr "" #: src/slic3r/GUI/Tab.cpp:2266 msgid "Position (for multi-extruder printers)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2269 msgid "Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:2272 msgid "Only lift Z" msgstr "" #: src/slic3r/GUI/Tab.cpp:2285 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2443 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2445 msgid "Firmware Retraction" msgstr "" #: src/slic3r/GUI/Tab.cpp:2771 #, possible-c-format msgid "Default preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2772 #, possible-c-format msgid "Preset (%s)" msgstr "" #: src/slic3r/GUI/Tab.cpp:2789 msgid "has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:2792 msgid "is not compatible with printer" msgstr "" #: src/slic3r/GUI/Tab.cpp:2793 msgid "is not compatible with print profile" msgstr "" #: src/slic3r/GUI/Tab.cpp:2795 msgid "and it has the following unsaved changes:" msgstr "" #: src/slic3r/GUI/Tab.cpp:2799 msgid "Unsaved Changes" msgstr "" #: src/slic3r/GUI/Tab.cpp:2811 msgid "Please check your object list before preset changing." msgstr "" #: src/slic3r/GUI/Tab.cpp:2914 msgid "The supplied name is empty. It can't be saved." msgstr "" #: src/slic3r/GUI/Tab.cpp:2919 msgid "Cannot overwrite a system profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:2923 msgid "Cannot overwrite an external profile." msgstr "" #: src/slic3r/GUI/Tab.cpp:2949 msgid "remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:2949 msgid "delete" msgstr "" #: src/slic3r/GUI/Tab.cpp:2950 msgid "Are you sure you want to " msgstr "" #: src/slic3r/GUI/Tab.cpp:2950 msgid " the selected preset?" msgstr "" #: src/slic3r/GUI/Tab.cpp:2951 msgid "Remove" msgstr "" #: src/slic3r/GUI/Tab.cpp:2952 msgid " Preset" msgstr "" #: src/slic3r/GUI/Tab.cpp:3078 msgid "LOCKED LOCK" msgstr "" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3080 msgid "" "indicates that the settings are the same as the system values for the " "current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3082 msgid "UNLOCKED LOCK" msgstr "" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3084 msgid "" "indicates that some settings were changed and are not equal to the system " "values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3089 msgid "WHITE BULLET" msgstr "" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3091 msgid "" "for the left button: \tindicates a non-system preset,\n" "for the right button: \tindicates that the settings hasn't been modified." msgstr "" #: src/slic3r/GUI/Tab.cpp:3094 msgid "BACK ARROW" msgstr "" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3096 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3121 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system " "values for the current option group" msgstr "" #: src/slic3r/GUI/Tab.cpp:3123 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system values for the current option group.\n" "Click to reset all settings for current option group to the system values." msgstr "" #: src/slic3r/GUI/Tab.cpp:3126 msgid "WHITE BULLET icon indicates a non system preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3129 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" #: src/slic3r/GUI/Tab.cpp:3131 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3137 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3138 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system value.\n" "Click to reset current value to the system value." msgstr "" #: src/slic3r/GUI/Tab.cpp:3144 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3145 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" #: src/slic3r/GUI/Tab.cpp:3257 msgid " as:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3301 msgid "the following postfix are not allowed:" msgstr "" #: src/slic3r/GUI/Tab.cpp:3305 msgid "The supplied name is not available." msgstr "" #: src/slic3r/GUI/Tab.cpp:3318 msgid "Material" msgstr "" #: src/slic3r/GUI/Tab.cpp:3320 src/slic3r/GUI/Tab.cpp:3411 msgid "Layers" msgstr "" #: src/slic3r/GUI/Tab.cpp:3324 msgid "Exposure" msgstr "" #: src/slic3r/GUI/Tab.cpp:3419 msgid "Support head" msgstr "" #: src/slic3r/GUI/Tab.cpp:3424 msgid "Support pillar" msgstr "" #: src/slic3r/GUI/Tab.cpp:3434 msgid "Connection of the support sticks and junctions" msgstr "" #: src/slic3r/GUI/Tab.cpp:3439 msgid "Automatic generation" msgstr "" #: src/slic3r/GUI/Tab.cpp:3501 msgid "Head penetration should not be greater than the head width." msgstr "" #: src/slic3r/GUI/Tab.cpp:3502 msgid "Invalid Head penetration" msgstr "" #: src/slic3r/GUI/Tab.cpp:3514 msgid "Pinhead diameter should be smaller than the pillar diameter." msgstr "" #: src/slic3r/GUI/Tab.cpp:3515 msgid "Invalid pinhead diameter" msgstr "" #: src/slic3r/GUI/Tab.hpp:315 src/slic3r/GUI/Tab.hpp:403 msgid "Print Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:333 msgid "Filament Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:366 msgid "Printer Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:389 msgid "Material Settings" msgstr "" #: src/slic3r/GUI/Tab.hpp:389 msgid "sla_material" msgstr "" #: src/slic3r/GUI/Tab.hpp:403 msgid "sla_print" msgstr "" #: src/slic3r/GUI/Tab.hpp:415 msgid "Save preset" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:30 msgid "Update available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:30 #, possible-c-format msgid "New version of %s is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:37 msgid "To download, follow the link below." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "Current version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:47 msgid "New version:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:55 msgid "Don't notify about new releases any more" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:73 src/slic3r/GUI/UpdateDialogs.cpp:168 msgid "Configuration update" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:73 msgid "Configuration update is available" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:76 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:112 #, possible-c-format msgid "%s incompatibility" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:113 #, possible-c-format msgid "%s configuration is incompatible" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:118 #, possible-c-format msgid "" "This version of %s is not compatible with currently installed configuration " "bundles.\n" "This probably happened as a result of running an older %s after using a " "newer one.\n" "\n" "You may either exit %s and try again with a newer version, or you may re-run " "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s.\n" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:127 #, possible-c-format msgid "This %s version: %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:132 msgid "Incompatible bundles:" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:148 #, possible-c-format msgid "Exit %s" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:151 msgid "Re-configure" msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:172 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" #: src/slic3r/GUI/UpdateDialogs.cpp:188 msgid "For more information please visit our wiki page:" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:14 msgid "Ramming customization" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:40 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:82 msgid "Total ramming time" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:84 msgid "Total rammed volume" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:88 msgid "Ramming line width" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:90 msgid "Ramming line spacing" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:141 msgid "Wipe tower - Purging volume adjustment" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:225 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:226 msgid "Extruder changed to" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:234 msgid "unloaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:235 msgid "loaded" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:240 msgid "Tool #" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:247 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:248 msgid "Volume to purge (mm³) when the filament is being" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:262 msgid "From" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:327 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:339 msgid "Show simplified settings" msgstr "" #: src/slic3r/GUI/WipeTowerDialog.cpp:339 msgid "Show advanced settings" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:400 msgid "Instances" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:407 src/slic3r/GUI/wxExtensions.cpp:474 #, possible-c-format msgid "Instance %d" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:2462 #, possible-c-format msgid "Switch to the %s mode" msgstr "" #: src/slic3r/GUI/wxExtensions.cpp:2463 #, possible-c-format msgid "Current mode is %s" msgstr "" #: src/slic3r/Utils/Duet.cpp:51 msgid "Connection to Duet works correctly." msgstr "" #: src/slic3r/Utils/Duet.cpp:56 msgid "Could not connect to Duet" msgstr "" #: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154 msgid "Unknown error occured" msgstr "" #: src/slic3r/Utils/Duet.cpp:148 msgid "Wrong password" msgstr "" #: src/slic3r/Utils/Duet.cpp:151 msgid "Could not get resources to create a new connection" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:69 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:84 msgid "Connection to OctoPrint works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:90 msgid "Could not connect to OctoPrint" msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:90 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:195 msgid "Connection to Prusa SL1 works correctly." msgstr "" #: src/slic3r/Utils/OctoPrint.cpp:200 msgid "Could not connect to Prusa SLA" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:583 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:588 #, possible-c-format msgid "requires min. %s" msgstr "" #: src/slic3r/Utils/PresetUpdater.cpp:590 #, possible-c-format msgid "requires max. %s" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model..." msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "" #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model repair failed: \n" msgstr "" #: src/libslic3r/Zipper.cpp:35 msgid "undefined error" msgstr "" #: src/libslic3r/Zipper.cpp:37 msgid "too many files" msgstr "" #: src/libslic3r/Zipper.cpp:39 msgid "file too large" msgstr "" #: src/libslic3r/Zipper.cpp:41 msgid "unsupported method" msgstr "" #: src/libslic3r/Zipper.cpp:43 msgid "unsupported encryption" msgstr "" #: src/libslic3r/Zipper.cpp:45 msgid "unsupported feature" msgstr "" #: src/libslic3r/Zipper.cpp:47 msgid "failed finding central directory" msgstr "" #: src/libslic3r/Zipper.cpp:49 msgid "not a ZIP archive" msgstr "" #: src/libslic3r/Zipper.cpp:51 msgid "invalid header or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:53 msgid "unsupported multidisk archive" msgstr "" #: src/libslic3r/Zipper.cpp:55 msgid "decompression failed or archive is corrupted" msgstr "" #: src/libslic3r/Zipper.cpp:57 msgid "compression failed" msgstr "" #: src/libslic3r/Zipper.cpp:59 msgid "unexpected decompressed size" msgstr "" #: src/libslic3r/Zipper.cpp:61 msgid "CRC-32 check failed" msgstr "" #: src/libslic3r/Zipper.cpp:63 msgid "unsupported central directory size" msgstr "" #: src/libslic3r/Zipper.cpp:65 msgid "allocation failed" msgstr "" #: src/libslic3r/Zipper.cpp:67 msgid "file open failed" msgstr "" #: src/libslic3r/Zipper.cpp:69 msgid "file create failed" msgstr "" #: src/libslic3r/Zipper.cpp:71 msgid "file write failed" msgstr "" #: src/libslic3r/Zipper.cpp:73 msgid "file read failed" msgstr "" #: src/libslic3r/Zipper.cpp:75 msgid "file close failed" msgstr "" #: src/libslic3r/Zipper.cpp:77 msgid "file seek failed" msgstr "" #: src/libslic3r/Zipper.cpp:79 msgid "file stat failed" msgstr "" #: src/libslic3r/Zipper.cpp:81 msgid "invalid parameter" msgstr "" #: src/libslic3r/Zipper.cpp:83 msgid "invalid filename" msgstr "" #: src/libslic3r/Zipper.cpp:85 msgid "buffer too small" msgstr "" #: src/libslic3r/Zipper.cpp:87 msgid "internal error" msgstr "" #: src/libslic3r/Zipper.cpp:89 msgid "file not found" msgstr "" #: src/libslic3r/Zipper.cpp:91 msgid "archive is too large" msgstr "" #: src/libslic3r/Zipper.cpp:93 msgid "validation failed" msgstr "" #: src/libslic3r/Zipper.cpp:95 msgid "write calledback failed" msgstr "" #: src/libslic3r/Zipper.cpp:105 msgid "Error with zip archive" msgstr "" #: src/libslic3r/Print.cpp:1135 msgid "All objects are outside of the print volume." msgstr "" #: src/libslic3r/Print.cpp:1162 msgid "Some objects are too close; your extruder will collide with them." msgstr "" #: src/libslic3r/Print.cpp:1177 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" #: src/libslic3r/Print.cpp:1187 msgid "The Spiral Vase option can only be used when printing a single object." msgstr "" #: src/libslic3r/Print.cpp:1189 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" #: src/libslic3r/Print.cpp:1195 msgid "" "All extruders must have the same diameter for single extruder multimaterial " "printer." msgstr "" #: src/libslic3r/Print.cpp:1200 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " "and Repetier G-code flavors." msgstr "" #: src/libslic3r/Print.cpp:1202 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" #: src/libslic3r/Print.cpp:1223 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" #: src/libslic3r/Print.cpp:1225 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" #: src/libslic3r/Print.cpp:1227 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" #: src/libslic3r/Print.cpp:1229 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" #: src/libslic3r/Print.cpp:1258 msgid "" "The Wipe tower is only supported if all objects have the same layer height " "profile" msgstr "" #: src/libslic3r/Print.cpp:1268 msgid "The supplied settings will cause an empty print." msgstr "" #: src/libslic3r/Print.cpp:1285 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" #: src/libslic3r/Print.cpp:1294 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" #: src/libslic3r/Print.cpp:1302 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" #: src/libslic3r/Print.cpp:1306 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" #: src/libslic3r/Print.cpp:1313 msgid "first_layer_height" msgstr "" #: src/libslic3r/Print.cpp:1328 msgid "First layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1332 msgid "Layer height can't be greater than nozzle diameter" msgstr "" #: src/libslic3r/Print.cpp:1476 msgid "Infilling layers" msgstr "" #: src/libslic3r/Print.cpp:1484 msgid "Generating skirt" msgstr "" #: src/libslic3r/Print.cpp:1492 msgid "Generating brim" msgstr "" #: src/libslic3r/Print.cpp:1520 msgid "Exporting G-code" msgstr "" #: src/libslic3r/Print.cpp:1524 msgid "Generating G-code" msgstr "" #: src/libslic3r/SLAPrint.cpp:57 msgid "Slicing model" msgstr "" #: src/libslic3r/SLAPrint.cpp:58 src/libslic3r/SLAPrint.cpp:819 msgid "Generating support points" msgstr "" #: src/libslic3r/SLAPrint.cpp:59 msgid "Generating support tree" msgstr "" #: src/libslic3r/SLAPrint.cpp:60 msgid "Generating pad" msgstr "" #: src/libslic3r/SLAPrint.cpp:61 msgid "Slicing supports" msgstr "" #: src/libslic3r/SLAPrint.cpp:78 msgid "Merging slices and calculating statistics" msgstr "" #: src/libslic3r/SLAPrint.cpp:79 msgid "Rasterizing layers" msgstr "" #: src/libslic3r/SLAPrint.cpp:622 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" #: src/libslic3r/SLAPrint.cpp:634 msgid "Elevation is too low for object." msgstr "" #. TRN To be shown at the status bar on SLA slicing error. #: src/libslic3r/SLAPrint.cpp:719 msgid "Slicing had to be stopped due to an internal error." msgstr "" #: src/libslic3r/SLAPrint.cpp:867 src/libslic3r/SLAPrint.cpp:877 #: src/libslic3r/SLAPrint.cpp:925 msgid "Visualizing supports" msgstr "" #: src/libslic3r/SLAPrint.cpp:1463 msgid "Slicing done" msgstr "" #: src/libslic3r/PrintBase.cpp:65 msgid "Failed processing of the output_filename_format template." msgstr "" #: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44 msgid "Printer technology" msgstr "" #: src/libslic3r/PrintConfig.cpp:51 msgid "Bed shape" msgstr "" #: src/libslic3r/PrintConfig.cpp:58 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" #: src/libslic3r/PrintConfig.cpp:65 msgid "Max print height" msgstr "" #: src/libslic3r/PrintConfig.cpp:66 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" #: src/libslic3r/PrintConfig.cpp:72 msgid "Slice gap closing radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:74 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" #: src/libslic3r/PrintConfig.cpp:82 msgid "Hostname, IP or URL" msgstr "" #: src/libslic3r/PrintConfig.cpp:83 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance." msgstr "" #: src/libslic3r/PrintConfig.cpp:89 msgid "API Key / Password" msgstr "" #: src/libslic3r/PrintConfig.cpp:90 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" #: src/libslic3r/PrintConfig.cpp:96 msgid "HTTPS CA File" msgstr "" #: src/libslic3r/PrintConfig.cpp:97 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" #: src/libslic3r/PrintConfig.cpp:112 msgid "Avoid crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:113 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:120 src/libslic3r/PrintConfig.cpp:2002 msgid "Other layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:121 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:123 msgid "Bed temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:130 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:140 msgid "Between objects G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:141 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:152 msgid "Number of solid layers to generate on bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:153 msgid "Bottom solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:158 msgid "Bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:159 msgid "" "This is the acceleration your printer will use for bridges. Set zero to " "disable acceleration control for bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:161 src/libslic3r/PrintConfig.cpp:304 #: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:937 #: src/libslic3r/PrintConfig.cpp:1106 src/libslic3r/PrintConfig.cpp:1159 #: src/libslic3r/PrintConfig.cpp:1170 src/libslic3r/PrintConfig.cpp:1359 msgid "mm/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:167 msgid "Bridging angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:169 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" #: src/libslic3r/PrintConfig.cpp:172 src/libslic3r/PrintConfig.cpp:734 #: src/libslic3r/PrintConfig.cpp:1595 src/libslic3r/PrintConfig.cpp:1605 #: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:1987 #: src/libslic3r/PrintConfig.cpp:2171 src/libslic3r/PrintConfig.cpp:2488 #: src/libslic3r/PrintConfig.cpp:2597 msgid "°" msgstr "" #: src/libslic3r/PrintConfig.cpp:178 msgid "Bridges fan speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:179 msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" #: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:746 #: src/libslic3r/PrintConfig.cpp:1179 src/libslic3r/PrintConfig.cpp:1242 #: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:2285 #: src/libslic3r/PrintConfig.cpp:2527 msgid "%" msgstr "" #: src/libslic3r/PrintConfig.cpp:187 msgid "Bridge flow ratio" msgstr "" #: src/libslic3r/PrintConfig.cpp:189 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" #: src/libslic3r/PrintConfig.cpp:199 msgid "Bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:201 msgid "Speed for printing bridges." msgstr "" #: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:578 #: src/libslic3r/PrintConfig.cpp:586 src/libslic3r/PrintConfig.cpp:595 #: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:630 #: src/libslic3r/PrintConfig.cpp:649 src/libslic3r/PrintConfig.cpp:875 #: src/libslic3r/PrintConfig.cpp:1002 src/libslic3r/PrintConfig.cpp:1088 #: src/libslic3r/PrintConfig.cpp:1124 src/libslic3r/PrintConfig.cpp:1137 #: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1201 #: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1388 #: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1571 #: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:2078 msgid "mm/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:209 msgid "Brim width" msgstr "" #: src/libslic3r/PrintConfig.cpp:210 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:217 msgid "Clip multi-part objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:218 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" #: src/libslic3r/PrintConfig.cpp:225 msgid "Colorprint height" msgstr "" #: src/libslic3r/PrintConfig.cpp:226 msgid "Heights at which a filament change is to occur. " msgstr "" #: src/libslic3r/PrintConfig.cpp:236 msgid "Compatible printers condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:237 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:251 msgid "Compatible print profiles condition" msgstr "" #: src/libslic3r/PrintConfig.cpp:252 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" #: src/libslic3r/PrintConfig.cpp:269 msgid "Complete individual objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:270 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" #: src/libslic3r/PrintConfig.cpp:278 msgid "Enable auto cooling" msgstr "" #: src/libslic3r/PrintConfig.cpp:279 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" #: src/libslic3r/PrintConfig.cpp:284 msgid "Cooling tube position" msgstr "" #: src/libslic3r/PrintConfig.cpp:285 msgid "Distance of the center-point of the cooling tube from the extruder tip " msgstr "" #: src/libslic3r/PrintConfig.cpp:292 msgid "Cooling tube length" msgstr "" #: src/libslic3r/PrintConfig.cpp:293 msgid "Length of the cooling tube to limit space for cooling moves inside it " msgstr "" #: src/libslic3r/PrintConfig.cpp:301 msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). Set zero to " "prevent resetting acceleration at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:310 msgid "Default filament profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:311 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:317 msgid "Default print profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:318 src/libslic3r/PrintConfig.cpp:2366 #: src/libslic3r/PrintConfig.cpp:2377 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" #: src/libslic3r/PrintConfig.cpp:324 msgid "Disable fan for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:325 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" #: src/libslic3r/PrintConfig.cpp:327 src/libslic3r/PrintConfig.cpp:947 #: src/libslic3r/PrintConfig.cpp:1460 src/libslic3r/PrintConfig.cpp:1645 #: src/libslic3r/PrintConfig.cpp:1706 src/libslic3r/PrintConfig.cpp:1869 #: src/libslic3r/PrintConfig.cpp:1914 msgid "layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:334 msgid "Don't support bridges" msgstr "" #: src/libslic3r/PrintConfig.cpp:336 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" #: src/libslic3r/PrintConfig.cpp:342 msgid "Distance between copies" msgstr "" #: src/libslic3r/PrintConfig.cpp:343 msgid "Distance used for the auto-arrange feature of the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:350 msgid "Elephant foot compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:352 msgid "" "The first layer will be shrunk in the XY plane by the configured value to " "compensate for the 1st layer squish aka an Elephant Foot effect." msgstr "" #: src/libslic3r/PrintConfig.cpp:361 msgid "" "This end procedure is inserted at the end of the output file. Note that you " "can use placeholder variables for all Slic3r settings." msgstr "" #: src/libslic3r/PrintConfig.cpp:371 msgid "" "This end procedure is inserted at the end of the output file, before the " "printer end gcode. Note that you can use placeholder variables for all " "Slic3r settings. If you have multiple extruders, the gcode is processed in " "extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:381 msgid "Ensure vertical shell thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:383 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" #: src/libslic3r/PrintConfig.cpp:389 msgid "Top fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:391 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:797 #: src/libslic3r/PrintConfig.cpp:1947 msgid "Rectilinear" msgstr "" #: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:803 msgid "Concentric" msgstr "" #: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807 msgid "Hilbert Curve" msgstr "" #: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:808 msgid "Archimedean Chords" msgstr "" #: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:809 msgid "Octagram Spiral" msgstr "" #: src/libslic3r/PrintConfig.cpp:410 msgid "Bottom fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:411 msgid "" "Fill pattern for bottom infill. This only affects the bottom external " "visible layer, and not its adjacent solid shells." msgstr "" #: src/libslic3r/PrintConfig.cpp:416 src/libslic3r/PrintConfig.cpp:426 msgid "External perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:418 msgid "" "Set this to a non-zero value to set a manual extrusion width for external " "perimeters. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 200%), it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:421 src/libslic3r/PrintConfig.cpp:836 #: src/libslic3r/PrintConfig.cpp:968 src/libslic3r/PrintConfig.cpp:1379 #: src/libslic3r/PrintConfig.cpp:1717 src/libslic3r/PrintConfig.cpp:1890 #: src/libslic3r/PrintConfig.cpp:2048 msgid "mm or % (leave 0 for default)" msgstr "" #: src/libslic3r/PrintConfig.cpp:428 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:431 src/libslic3r/PrintConfig.cpp:857 #: src/libslic3r/PrintConfig.cpp:1676 src/libslic3r/PrintConfig.cpp:1727 #: src/libslic3r/PrintConfig.cpp:1933 src/libslic3r/PrintConfig.cpp:2060 msgid "mm/s or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:438 msgid "External perimeters first" msgstr "" #: src/libslic3r/PrintConfig.cpp:440 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" #: src/libslic3r/PrintConfig.cpp:446 msgid "Extra perimeters if needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:448 #, possible-c-format msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " "is supported." msgstr "" #: src/libslic3r/PrintConfig.cpp:458 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:470 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:480 msgid "Radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:481 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" #: src/libslic3r/PrintConfig.cpp:491 msgid "Extruder Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:492 src/libslic3r/PrintConfig.cpp:552 msgid "This is only used in the Slic3r interface as a visual help." msgstr "" #: src/libslic3r/PrintConfig.cpp:498 msgid "Extruder offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:499 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" #: src/libslic3r/PrintConfig.cpp:508 msgid "Extrusion axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:509 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" #: src/libslic3r/PrintConfig.cpp:514 msgid "Extrusion multiplier" msgstr "" #: src/libslic3r/PrintConfig.cpp:515 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" #: src/libslic3r/PrintConfig.cpp:523 msgid "Default extrusion width" msgstr "" #: src/libslic3r/PrintConfig.cpp:525 msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " "tooltips for perimeter extrusion width, infill extrusion width etc). If " "expressed as percentage (for example: 230%), it will be computed over layer " "height." msgstr "" #: src/libslic3r/PrintConfig.cpp:529 msgid "mm or % (leave 0 for auto)" msgstr "" #: src/libslic3r/PrintConfig.cpp:534 msgid "Keep fan always on" msgstr "" #: src/libslic3r/PrintConfig.cpp:535 msgid "" "If this is enabled, fan will never be disabled and will be kept running at " "least at its minimum speed. Useful for PLA, harmful for ABS." msgstr "" #: src/libslic3r/PrintConfig.cpp:540 msgid "Enable fan if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:541 msgid "" "If layer print time is estimated below this number of seconds, fan will be " "enabled and its speed will be calculated by interpolating the minimum and " "maximum speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:543 src/libslic3r/PrintConfig.cpp:1663 msgid "approximate seconds" msgstr "" #: src/libslic3r/PrintConfig.cpp:551 msgid "Color" msgstr "" #: src/libslic3r/PrintConfig.cpp:557 msgid "Filament notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:558 msgid "You can put your notes regarding the filament here." msgstr "" #: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:1207 msgid "Max volumetric speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:567 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" #: src/libslic3r/PrintConfig.cpp:570 src/libslic3r/PrintConfig.cpp:1210 msgid "mm³/s" msgstr "" #: src/libslic3r/PrintConfig.cpp:576 msgid "Loading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:577 msgid "Speed used for loading the filament on the wipe tower. " msgstr "" #: src/libslic3r/PrintConfig.cpp:584 msgid "Loading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:585 msgid "Speed used at the very beginning of loading phase. " msgstr "" #: src/libslic3r/PrintConfig.cpp:592 msgid "Unloading speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:593 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming). " msgstr "" #: src/libslic3r/PrintConfig.cpp:601 msgid "Unloading speed at the start" msgstr "" #: src/libslic3r/PrintConfig.cpp:602 msgid "" "Speed used for unloading the tip of the filament immediately after ramming. " msgstr "" #: src/libslic3r/PrintConfig.cpp:609 msgid "Delay after unloading" msgstr "" #: src/libslic3r/PrintConfig.cpp:610 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions. " msgstr "" #: src/libslic3r/PrintConfig.cpp:619 msgid "Number of cooling moves" msgstr "" #: src/libslic3r/PrintConfig.cpp:620 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves " msgstr "" #: src/libslic3r/PrintConfig.cpp:628 msgid "Speed of the first cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:629 msgid "Cooling moves are gradually accelerating beginning at this speed. " msgstr "" #: src/libslic3r/PrintConfig.cpp:636 msgid "Minimal purge on wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:637 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" #: src/libslic3r/PrintConfig.cpp:641 msgid "mm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:647 msgid "Speed of the last cooling move" msgstr "" #: src/libslic3r/PrintConfig.cpp:648 msgid "Cooling moves are gradually accelerating towards this speed. " msgstr "" #: src/libslic3r/PrintConfig.cpp:655 msgid "Filament load time" msgstr "" #: src/libslic3r/PrintConfig.cpp:656 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:663 msgid "Ramming parameters" msgstr "" #: src/libslic3r/PrintConfig.cpp:664 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters " msgstr "" #: src/libslic3r/PrintConfig.cpp:670 msgid "Filament unload time" msgstr "" #: src/libslic3r/PrintConfig.cpp:671 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" #: src/libslic3r/PrintConfig.cpp:679 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" #: src/libslic3r/PrintConfig.cpp:686 msgid "Density" msgstr "" #: src/libslic3r/PrintConfig.cpp:687 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" #: src/libslic3r/PrintConfig.cpp:690 msgid "g/cm³" msgstr "" #: src/libslic3r/PrintConfig.cpp:695 msgid "Filament type" msgstr "" #: src/libslic3r/PrintConfig.cpp:696 msgid "The filament material type for use in custom G-codes." msgstr "" #: src/libslic3r/PrintConfig.cpp:712 msgid "Soluble material" msgstr "" #: src/libslic3r/PrintConfig.cpp:713 msgid "Soluble material is most likely used for a soluble support." msgstr "" #: src/libslic3r/PrintConfig.cpp:719 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" #: src/libslic3r/PrintConfig.cpp:720 msgid "money/kg" msgstr "" #: src/libslic3r/PrintConfig.cpp:729 msgid "Fill angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:731 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" #: src/libslic3r/PrintConfig.cpp:743 msgid "Fill density" msgstr "" #: src/libslic3r/PrintConfig.cpp:745 msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "" #: src/libslic3r/PrintConfig.cpp:780 msgid "Fill pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:782 msgid "Fill pattern for general low-density infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:798 msgid "Grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:799 msgid "Triangles" msgstr "" #: src/libslic3r/PrintConfig.cpp:800 msgid "Stars" msgstr "" #: src/libslic3r/PrintConfig.cpp:801 msgid "Cubic" msgstr "" #: src/libslic3r/PrintConfig.cpp:802 msgid "Line" msgstr "" #: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:1949 msgid "Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:805 msgid "3D Honeycomb" msgstr "" #: src/libslic3r/PrintConfig.cpp:806 msgid "Gyroid" msgstr "" #: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:822 #: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:863 msgid "First layer" msgstr "" #: src/libslic3r/PrintConfig.cpp:814 msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:823 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:832 msgid "" "Set this to a non-zero value to set a manual extrusion width for first " "layer. You can use this to force fatter extrudates for better adhesion. If " "expressed as percentage (for example 120%) it will be computed over first " "layer height. If set to zero, it will use the default extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:842 msgid "First layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:844 msgid "" "When printing with very low layer heights, you might still want to print a " "thicker bottom layer to improve adhesion and tolerance for non perfect build " "plates. This can be expressed as an absolute value or as a percentage (for " "example: 150%) over the default layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:848 src/libslic3r/PrintConfig.cpp:993 #: src/libslic3r/PrintConfig.cpp:1822 msgid "mm or %" msgstr "" #: src/libslic3r/PrintConfig.cpp:853 msgid "First layer speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:854 msgid "" "If expressed as absolute value in mm/s, this speed will be applied to all " "the print moves of the first layer, regardless of their type. If expressed " "as a percentage (for example: 40%) it will scale the default speeds." msgstr "" #: src/libslic3r/PrintConfig.cpp:864 msgid "" "Extruder temperature for first layer. If you want to control temperature " "manually during print, set this to zero to disable temperature control " "commands in the output file." msgstr "" #: src/libslic3r/PrintConfig.cpp:873 msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues. Set zero to disable gaps " "filling." msgstr "" #: src/libslic3r/PrintConfig.cpp:881 msgid "Verbose G-code" msgstr "" #: src/libslic3r/PrintConfig.cpp:882 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" #: src/libslic3r/PrintConfig.cpp:889 msgid "G-code flavor" msgstr "" #: src/libslic3r/PrintConfig.cpp:890 msgid "" "Some G/M-code commands, including temperature control and others, are not " "universal. Set this option to your printer's firmware to get a compatible " "output. The \"No extrusion\" flavor prevents Slic3r from exporting any " "extrusion value at all." msgstr "" #: src/libslic3r/PrintConfig.cpp:913 msgid "No extrusion" msgstr "" #: src/libslic3r/PrintConfig.cpp:918 msgid "Label objects" msgstr "" #: src/libslic3r/PrintConfig.cpp:919 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:926 msgid "High extruder current on filament swap" msgstr "" #: src/libslic3r/PrintConfig.cpp:927 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" #: src/libslic3r/PrintConfig.cpp:935 msgid "" "This is the acceleration your printer will use for infill. Set zero to " "disable acceleration control for infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:943 msgid "Combine infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:945 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" #: src/libslic3r/PrintConfig.cpp:948 msgid "Combine infill every n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:954 msgid "Infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:956 msgid "The extruder to use when printing infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:964 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. You may want to use fatter extrudates to speed " "up the infill and make your parts stronger. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:973 msgid "Infill before perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:974 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" #: src/libslic3r/PrintConfig.cpp:979 msgid "Only infill where needed" msgstr "" #: src/libslic3r/PrintConfig.cpp:981 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" #: src/libslic3r/PrintConfig.cpp:988 msgid "Infill/perimeters overlap" msgstr "" #: src/libslic3r/PrintConfig.cpp:990 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1001 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1009 msgid "Inherits profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:1010 msgid "Name of the profile, from which this profile inherits." msgstr "" #: src/libslic3r/PrintConfig.cpp:1023 msgid "Interface shells" msgstr "" #: src/libslic3r/PrintConfig.cpp:1024 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1033 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1044 msgid "Supports remaining times" msgstr "" #: src/libslic3r/PrintConfig.cpp:1045 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" #: src/libslic3r/PrintConfig.cpp:1053 msgid "Supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1054 msgid "The firmware supports stealth mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:1078 msgid "Maximum feedrate X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1079 msgid "Maximum feedrate Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1080 msgid "Maximum feedrate Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1081 msgid "Maximum feedrate E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1084 msgid "Maximum feedrate of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1085 msgid "Maximum feedrate of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1086 msgid "Maximum feedrate of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1087 msgid "Maximum feedrate of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1096 msgid "Maximum acceleration X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1097 msgid "Maximum acceleration Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1098 msgid "Maximum acceleration Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1099 msgid "Maximum acceleration E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1102 msgid "Maximum acceleration of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1103 msgid "Maximum acceleration of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1104 msgid "Maximum acceleration of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1105 msgid "Maximum acceleration of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1114 msgid "Maximum jerk X" msgstr "" #: src/libslic3r/PrintConfig.cpp:1115 msgid "Maximum jerk Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:1116 msgid "Maximum jerk Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1117 msgid "Maximum jerk E" msgstr "" #: src/libslic3r/PrintConfig.cpp:1120 msgid "Maximum jerk of the X axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1121 msgid "Maximum jerk of the Y axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1122 msgid "Maximum jerk of the Z axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1123 msgid "Maximum jerk of the E axis" msgstr "" #: src/libslic3r/PrintConfig.cpp:1134 msgid "Minimum feedrate when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1136 msgid "Minimum feedrate when extruding (M205 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1145 msgid "Minimum travel feedrate" msgstr "" #: src/libslic3r/PrintConfig.cpp:1147 msgid "Minimum travel feedrate (M205 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1156 msgid "Maximum acceleration when extruding" msgstr "" #: src/libslic3r/PrintConfig.cpp:1158 msgid "Maximum acceleration when extruding (M204 S)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1167 msgid "Maximum acceleration when retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:1169 msgid "Maximum acceleration when retracting (M204 T)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1177 src/libslic3r/PrintConfig.cpp:1186 msgid "Max" msgstr "" #: src/libslic3r/PrintConfig.cpp:1178 msgid "This setting represents the maximum speed of your fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1187 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1197 msgid "Max print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1198 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" #: src/libslic3r/PrintConfig.cpp:1208 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "" #: src/libslic3r/PrintConfig.cpp:1217 msgid "Max volumetric slope positive" msgstr "" #: src/libslic3r/PrintConfig.cpp:1218 src/libslic3r/PrintConfig.cpp:1229 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" #: src/libslic3r/PrintConfig.cpp:1222 src/libslic3r/PrintConfig.cpp:1233 msgid "mm³/s²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1228 msgid "Max volumetric slope negative" msgstr "" #: src/libslic3r/PrintConfig.cpp:1240 src/libslic3r/PrintConfig.cpp:1249 msgid "Min" msgstr "" #: src/libslic3r/PrintConfig.cpp:1241 msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" #: src/libslic3r/PrintConfig.cpp:1250 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" #: src/libslic3r/PrintConfig.cpp:1258 msgid "Min print speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1259 msgid "Slic3r will not scale speed down below this speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1266 msgid "Minimal filament extrusion length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1267 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" #: src/libslic3r/PrintConfig.cpp:1276 msgid "Configuration notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1277 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "" #: src/libslic3r/PrintConfig.cpp:1286 msgid "Nozzle diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1287 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1292 msgid "Host Type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1293 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" #: src/libslic3r/PrintConfig.cpp:1304 msgid "Only retract when crossing perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1305 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1312 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" #: src/libslic3r/PrintConfig.cpp:1319 msgid "Output filename format" msgstr "" #: src/libslic3r/PrintConfig.cpp:1320 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" #: src/libslic3r/PrintConfig.cpp:1329 msgid "Detect bridging perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1331 msgid "" "Experimental option to adjust flow for overhangs (bridge flow will be used), " "to apply bridge speed to them and enable fan." msgstr "" #: src/libslic3r/PrintConfig.cpp:1337 msgid "Filament parking position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1338 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware. " msgstr "" #: src/libslic3r/PrintConfig.cpp:1346 msgid "Extra loading distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1347 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading. " msgstr "" #: src/libslic3r/PrintConfig.cpp:1355 src/libslic3r/PrintConfig.cpp:1373 #: src/libslic3r/PrintConfig.cpp:1385 src/libslic3r/PrintConfig.cpp:1395 msgid "Perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1356 msgid "" "This is the acceleration your printer will use for perimeters. A high value " "like 9000 usually gives good results if your hardware is up to the job. Set " "zero to disable acceleration control for perimeters." msgstr "" #: src/libslic3r/PrintConfig.cpp:1364 msgid "Perimeter extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1366 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" #: src/libslic3r/PrintConfig.cpp:1375 msgid "" "Set this to a non-zero value to set a manual extrusion width for perimeters. " "You may want to use thinner extrudates to get more accurate surfaces. If " "left zero, default extrusion width will be used if set, otherwise 1.125 x " "nozzle diameter will be used. If expressed as percentage (for example 200%) " "it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1387 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1397 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" #: src/libslic3r/PrintConfig.cpp:1401 msgid "(minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1409 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" #: src/libslic3r/PrintConfig.cpp:1421 msgid "Printer type" msgstr "" #: src/libslic3r/PrintConfig.cpp:1422 msgid "Type of the printer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1427 msgid "Printer notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:1428 msgid "You can put your notes regarding the printer here." msgstr "" #: src/libslic3r/PrintConfig.cpp:1436 msgid "Printer vendor" msgstr "" #: src/libslic3r/PrintConfig.cpp:1437 msgid "Name of the printer vendor." msgstr "" #: src/libslic3r/PrintConfig.cpp:1442 msgid "Printer variant" msgstr "" #: src/libslic3r/PrintConfig.cpp:1443 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" #: src/libslic3r/PrintConfig.cpp:1456 msgid "Raft layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1458 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" #: src/libslic3r/PrintConfig.cpp:1466 msgid "Resolution" msgstr "" #: src/libslic3r/PrintConfig.cpp:1467 msgid "" "Minimum detail resolution, used to simplify the input file for speeding up " "the slicing job and reducing memory usage. High-resolution models often " "carry more detail than printers can render. Set to zero to disable any " "simplification and use full resolution from input." msgstr "" #: src/libslic3r/PrintConfig.cpp:1477 msgid "Minimum travel after retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1478 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "" #: src/libslic3r/PrintConfig.cpp:1484 msgid "Retract amount before wipe" msgstr "" #: src/libslic3r/PrintConfig.cpp:1485 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" #: src/libslic3r/PrintConfig.cpp:1492 msgid "Retract on layer change" msgstr "" #: src/libslic3r/PrintConfig.cpp:1493 msgid "This flag enforces a retraction whenever a Z move is done." msgstr "" #: src/libslic3r/PrintConfig.cpp:1498 src/libslic3r/PrintConfig.cpp:1506 msgid "Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1499 msgid "Retraction Length" msgstr "" #: src/libslic3r/PrintConfig.cpp:1500 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1511 msgid "mm (zero to disable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1507 msgid "Retraction Length (Toolchange)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1508 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1516 msgid "Lift Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1517 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" #: src/libslic3r/PrintConfig.cpp:1524 msgid "Above Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1525 msgid "Only lift Z above" msgstr "" #: src/libslic3r/PrintConfig.cpp:1526 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1533 msgid "Below Z" msgstr "" #: src/libslic3r/PrintConfig.cpp:1534 msgid "Only lift Z below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1535 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" #: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551 msgid "Extra length on restart" msgstr "" #: src/libslic3r/PrintConfig.cpp:1544 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1552 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "" #: src/libslic3r/PrintConfig.cpp:1559 src/libslic3r/PrintConfig.cpp:1560 msgid "Retraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1561 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1568 msgid "Deretraction Speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1569 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" #: src/libslic3r/PrintConfig.cpp:1576 msgid "Seam position" msgstr "" #: src/libslic3r/PrintConfig.cpp:1578 msgid "Position of perimeters starting points." msgstr "" #: src/libslic3r/PrintConfig.cpp:1584 msgid "Random" msgstr "" #: src/libslic3r/PrintConfig.cpp:1585 msgid "Nearest" msgstr "" #: src/libslic3r/PrintConfig.cpp:1586 msgid "Aligned" msgstr "" #: src/libslic3r/PrintConfig.cpp:1594 msgid "Direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1596 msgid "Preferred direction of the seam" msgstr "" #: src/libslic3r/PrintConfig.cpp:1597 msgid "Seam preferred direction" msgstr "" #: src/libslic3r/PrintConfig.cpp:1604 msgid "Jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1606 msgid "Seam preferred direction jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1607 msgid "Preferred direction of the seam - jitter" msgstr "" #: src/libslic3r/PrintConfig.cpp:1617 msgid "USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1624 msgid "Serial port speed" msgstr "" #: src/libslic3r/PrintConfig.cpp:1625 msgid "Speed (baud) of USB/serial port for printer connection." msgstr "" #: src/libslic3r/PrintConfig.cpp:1634 msgid "Distance from object" msgstr "" #: src/libslic3r/PrintConfig.cpp:1635 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" #: src/libslic3r/PrintConfig.cpp:1642 msgid "Skirt height" msgstr "" #: src/libslic3r/PrintConfig.cpp:1643 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "" #: src/libslic3r/PrintConfig.cpp:1650 msgid "Loops (minimum)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1651 msgid "Skirt Loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1652 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" #: src/libslic3r/PrintConfig.cpp:1660 msgid "Slow down if layer print time is below" msgstr "" #: src/libslic3r/PrintConfig.cpp:1661 msgid "" "If layer print time is estimated below this number of seconds, print moves " "speed will be scaled down to extend duration to this value." msgstr "" #: src/libslic3r/PrintConfig.cpp:1671 msgid "Small perimeters" msgstr "" #: src/libslic3r/PrintConfig.cpp:1673 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1683 msgid "Solid infill threshold area" msgstr "" #: src/libslic3r/PrintConfig.cpp:1685 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:1686 msgid "mm²" msgstr "" #: src/libslic3r/PrintConfig.cpp:1692 msgid "Solid infill extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1694 msgid "The extruder to use when printing solid infill." msgstr "" #: src/libslic3r/PrintConfig.cpp:1700 msgid "Solid infill every" msgstr "" #: src/libslic3r/PrintConfig.cpp:1702 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1714 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "solid surfaces. If left zero, default extrusion width will be used if set, " "otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " "(for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1724 msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " "infill speed above. Set to zero for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:1736 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:1742 msgid "Spiral vase" msgstr "" #: src/libslic3r/PrintConfig.cpp:1743 msgid "" "This feature will raise Z gradually while printing a single-walled object in " "order to remove any visible seam. This option requires a single perimeter, " "no infill, no top solid layers and no support material. You can still set " "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than an object." msgstr "" #: src/libslic3r/PrintConfig.cpp:1751 msgid "Temperature variation" msgstr "" #: src/libslic3r/PrintConfig.cpp:1752 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" #: src/libslic3r/PrintConfig.cpp:1762 msgid "" "This start procedure is inserted at the beginning, after bed has reached the " "target temperature and extruder just started heating, and before extruder " "has finished heating. If Slic3r detects M104 or M190 in your custom codes, " "such commands will not be prepended automatically so you're free to " "customize the order of heating commands and other custom actions. Note that " "you can use placeholder variables for all Slic3r settings, so you can put a " "\"M109 S[first_layer_temperature]\" command wherever you want." msgstr "" #: src/libslic3r/PrintConfig.cpp:1777 msgid "" "This start procedure is inserted at the beginning, after any printer start " "gcode. This is used to override settings for a specific filament. If Slic3r " "detects M104, M109, M140 or M190 in your custom codes, such commands will " "not be prepended automatically so you're free to customize the order of " "heating commands and other custom actions. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 " "S[first_layer_temperature]\" command wherever you want. If you have multiple " "extruders, the gcode is processed in extruder order." msgstr "" #: src/libslic3r/PrintConfig.cpp:1792 msgid "Single Extruder Multi Material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1793 msgid "The printer multiplexes filaments into a single hot end." msgstr "" #: src/libslic3r/PrintConfig.cpp:1798 msgid "Prime all printing extruders" msgstr "" #: src/libslic3r/PrintConfig.cpp:1799 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1804 msgid "Generate support material" msgstr "" #: src/libslic3r/PrintConfig.cpp:1806 msgid "Enable support material generation." msgstr "" #: src/libslic3r/PrintConfig.cpp:1810 msgid "Auto generated supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:1812 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" #: src/libslic3r/PrintConfig.cpp:1818 msgid "XY separation between an object and its support" msgstr "" #: src/libslic3r/PrintConfig.cpp:1820 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" #: src/libslic3r/PrintConfig.cpp:1830 msgid "Pattern angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:1832 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" #: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:2450 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" #: src/libslic3r/PrintConfig.cpp:1848 msgid "Contact Z distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:1850 msgid "" "The vertical distance between object and support material interface. Setting " "this to 0 will also prevent Slic3r from using bridge flow and speed for the " "first object layer." msgstr "" #: src/libslic3r/PrintConfig.cpp:1857 msgid "0 (soluble)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1858 msgid "0.2 (detachable)" msgstr "" #: src/libslic3r/PrintConfig.cpp:1863 msgid "Enforce support for the first" msgstr "" #: src/libslic3r/PrintConfig.cpp:1865 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" #: src/libslic3r/PrintConfig.cpp:1870 msgid "Enforce support for the first n layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1876 msgid "Support material/raft/skirt extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1878 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1887 msgid "" "Set this to a non-zero value to set a manual extrusion width for support " "material. If left zero, default extrusion width will be used if set, " "otherwise nozzle diameter will be used. If expressed as percentage (for " "example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:1895 msgid "Interface loops" msgstr "" #: src/libslic3r/PrintConfig.cpp:1897 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:1902 msgid "Support material/raft interface extruder" msgstr "" #: src/libslic3r/PrintConfig.cpp:1904 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" #: src/libslic3r/PrintConfig.cpp:1911 msgid "Interface layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1913 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1920 msgid "Interface pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1922 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" #: src/libslic3r/PrintConfig.cpp:1931 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" #: src/libslic3r/PrintConfig.cpp:1940 msgid "Pattern" msgstr "" #: src/libslic3r/PrintConfig.cpp:1942 msgid "Pattern used to generate support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1948 msgid "Rectilinear grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:1954 msgid "Pattern spacing" msgstr "" #: src/libslic3r/PrintConfig.cpp:1956 msgid "Spacing between support material lines." msgstr "" #: src/libslic3r/PrintConfig.cpp:1965 msgid "Speed for printing support material." msgstr "" #: src/libslic3r/PrintConfig.cpp:1972 msgid "Synchronize with object layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:1974 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" #: src/libslic3r/PrintConfig.cpp:1980 msgid "Overhang threshold" msgstr "" #: src/libslic3r/PrintConfig.cpp:1982 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" #: src/libslic3r/PrintConfig.cpp:1994 msgid "With sheath around the support" msgstr "" #: src/libslic3r/PrintConfig.cpp:1996 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" #: src/libslic3r/PrintConfig.cpp:2003 msgid "" "Extruder temperature for layers after the first one. Set this to zero to " "disable temperature control commands in the output." msgstr "" #: src/libslic3r/PrintConfig.cpp:2005 msgid "Temperature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2011 msgid "Detect thin walls" msgstr "" #: src/libslic3r/PrintConfig.cpp:2013 msgid "" "Detect single-width walls (parts where two extrusions don't fit and we need " "to collapse them into a single trace)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2019 msgid "Threads" msgstr "" #: src/libslic3r/PrintConfig.cpp:2020 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" #: src/libslic3r/PrintConfig.cpp:2032 msgid "" "This custom code is inserted right before every extruder change. Note that " "you can use placeholder variables for all Slic3r settings as well as " "[previous_extruder] and [next_extruder]." msgstr "" #: src/libslic3r/PrintConfig.cpp:2044 msgid "" "Set this to a non-zero value to set a manual extrusion width for infill for " "top surfaces. You may want to use thinner extrudates to fill all narrow " "regions and get a smoother finish. If left zero, default extrusion width " "will be used if set, otherwise nozzle diameter will be used. If expressed as " "percentage (for example 90%) it will be computed over layer height." msgstr "" #: src/libslic3r/PrintConfig.cpp:2055 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" #: src/libslic3r/PrintConfig.cpp:2070 msgid "Number of solid layers to generate on top surfaces." msgstr "" #: src/libslic3r/PrintConfig.cpp:2071 msgid "Top solid layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2077 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2085 msgid "Use firmware retraction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2086 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2092 msgid "Use relative E distances" msgstr "" #: src/libslic3r/PrintConfig.cpp:2093 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" #: src/libslic3r/PrintConfig.cpp:2099 msgid "Use volumetric E" msgstr "" #: src/libslic3r/PrintConfig.cpp:2100 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" #: src/libslic3r/PrintConfig.cpp:2110 msgid "Enable variable layer height feature" msgstr "" #: src/libslic3r/PrintConfig.cpp:2111 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" #: src/libslic3r/PrintConfig.cpp:2117 msgid "Wipe while retracting" msgstr "" #: src/libslic3r/PrintConfig.cpp:2118 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "" #: src/libslic3r/PrintConfig.cpp:2125 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" #: src/libslic3r/PrintConfig.cpp:2131 msgid "Purging volumes - load/unload volumes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2132 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below. " msgstr "" #: src/libslic3r/PrintConfig.cpp:2138 msgid "Purging volumes - matrix" msgstr "" #: src/libslic3r/PrintConfig.cpp:2139 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools. " msgstr "" #: src/libslic3r/PrintConfig.cpp:2148 msgid "Position X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2149 msgid "X coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2155 msgid "Position Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2156 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2163 msgid "Width of a wipe tower" msgstr "" #: src/libslic3r/PrintConfig.cpp:2169 msgid "Wipe tower rotation angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2170 msgid "Wipe tower rotation angle with respect to x-axis " msgstr "" #: src/libslic3r/PrintConfig.cpp:2177 msgid "Wipe into this object's infill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2178 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" #: src/libslic3r/PrintConfig.cpp:2185 msgid "Wipe into this object" msgstr "" #: src/libslic3r/PrintConfig.cpp:2186 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" #: src/libslic3r/PrintConfig.cpp:2192 msgid "Maximal bridging distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2193 msgid "Maximal distance between supports on sparse infill sections. " msgstr "" #: src/libslic3r/PrintConfig.cpp:2199 msgid "XY Size Compensation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2201 msgid "" "The object will be grown/shrunk in the XY plane by the configured value " "(negative = inwards, positive = outwards). This might be useful for fine-" "tuning hole sizes." msgstr "" #: src/libslic3r/PrintConfig.cpp:2209 msgid "Z offset" msgstr "" #: src/libslic3r/PrintConfig.cpp:2210 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" #: src/libslic3r/PrintConfig.cpp:2227 msgid "Display width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2228 msgid "Width of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2233 msgid "Display height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2234 msgid "Height of the display" msgstr "" #: src/libslic3r/PrintConfig.cpp:2239 msgid "Number of pixels in" msgstr "" #: src/libslic3r/PrintConfig.cpp:2241 msgid "Number of pixels in X" msgstr "" #: src/libslic3r/PrintConfig.cpp:2247 msgid "Number of pixels in Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:2252 msgid "Display orientation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2253 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:2259 msgid "Landscape" msgstr "" #: src/libslic3r/PrintConfig.cpp:2260 msgid "Portrait" msgstr "" #: src/libslic3r/PrintConfig.cpp:2265 msgid "Fast" msgstr "" #: src/libslic3r/PrintConfig.cpp:2266 msgid "Fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2267 msgid "Time of the fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2274 msgid "Slow" msgstr "" #: src/libslic3r/PrintConfig.cpp:2275 msgid "Slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2276 msgid "Time of the slow tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2283 msgid "Area fill" msgstr "" #: src/libslic3r/PrintConfig.cpp:2284 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" #: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292 #: src/libslic3r/PrintConfig.cpp:2293 msgid "Printer scaling correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2299 src/libslic3r/PrintConfig.cpp:2300 msgid "Printer absolute correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2301 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" #: src/libslic3r/PrintConfig.cpp:2307 src/libslic3r/PrintConfig.cpp:2308 msgid "Printer gamma correction" msgstr "" #: src/libslic3r/PrintConfig.cpp:2309 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" #: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321 msgid "Initial layer height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2327 msgid "Faded layers" msgstr "" #: src/libslic3r/PrintConfig.cpp:2328 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2336 msgid "Exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2342 src/libslic3r/PrintConfig.cpp:2343 msgid "Initial exposure time" msgstr "" #: src/libslic3r/PrintConfig.cpp:2349 src/libslic3r/PrintConfig.cpp:2350 msgid "Correction for expansion" msgstr "" #: src/libslic3r/PrintConfig.cpp:2356 msgid "SLA print material notes" msgstr "" #: src/libslic3r/PrintConfig.cpp:2357 msgid "You can put your notes regarding the SLA print material here." msgstr "" #: src/libslic3r/PrintConfig.cpp:2365 src/libslic3r/PrintConfig.cpp:2376 msgid "Default SLA material profile" msgstr "" #: src/libslic3r/PrintConfig.cpp:2387 msgid "Generate supports" msgstr "" #: src/libslic3r/PrintConfig.cpp:2389 msgid "Generate supports for the models" msgstr "" #: src/libslic3r/PrintConfig.cpp:2394 msgid "Support head front diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2396 msgid "Diameter of the pointing side of the head" msgstr "" #: src/libslic3r/PrintConfig.cpp:2403 msgid "Support head penetration" msgstr "" #: src/libslic3r/PrintConfig.cpp:2405 msgid "How much the pinhead has to penetrate the model surface" msgstr "" #: src/libslic3r/PrintConfig.cpp:2412 msgid "Support head width" msgstr "" #: src/libslic3r/PrintConfig.cpp:2414 msgid "Width from the back sphere center to the front sphere center" msgstr "" #: src/libslic3r/PrintConfig.cpp:2422 msgid "Support pillar diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2424 msgid "Diameter in mm of the support pillars" msgstr "" #: src/libslic3r/PrintConfig.cpp:2432 msgid "Support pillar connection mode" msgstr "" #: src/libslic3r/PrintConfig.cpp:2433 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" #: src/libslic3r/PrintConfig.cpp:2441 msgid "Zig-Zag" msgstr "" #: src/libslic3r/PrintConfig.cpp:2442 msgid "Cross" msgstr "" #: src/libslic3r/PrintConfig.cpp:2443 msgid "Dynamic" msgstr "" #: src/libslic3r/PrintConfig.cpp:2455 msgid "Pillar widening factor" msgstr "" #: src/libslic3r/PrintConfig.cpp:2457 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" #: src/libslic3r/PrintConfig.cpp:2466 msgid "Support base diameter" msgstr "" #: src/libslic3r/PrintConfig.cpp:2468 msgid "Diameter in mm of the pillar base" msgstr "" #: src/libslic3r/PrintConfig.cpp:2476 msgid "Support base height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2478 msgid "The height of the pillar base cone" msgstr "" #: src/libslic3r/PrintConfig.cpp:2485 msgid "Critical angle" msgstr "" #: src/libslic3r/PrintConfig.cpp:2487 msgid "The default angle for connecting support sticks and junctions." msgstr "" #: src/libslic3r/PrintConfig.cpp:2495 msgid "Max bridge length" msgstr "" #: src/libslic3r/PrintConfig.cpp:2497 msgid "The max length of a bridge" msgstr "" #: src/libslic3r/PrintConfig.cpp:2504 msgid "Max pillar linking distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2506 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" #: src/libslic3r/PrintConfig.cpp:2514 msgid "Object elevation" msgstr "" #: src/libslic3r/PrintConfig.cpp:2516 msgid "How much the supports should lift up the supported object." msgstr "" #: src/libslic3r/PrintConfig.cpp:2524 msgid "Support points density" msgstr "" #: src/libslic3r/PrintConfig.cpp:2526 msgid "This is a relative measure of support points density." msgstr "" #: src/libslic3r/PrintConfig.cpp:2532 msgid "Minimal distance of the support points" msgstr "" #: src/libslic3r/PrintConfig.cpp:2534 msgid "No support points will be placed closer than this threshold." msgstr "" #: src/libslic3r/PrintConfig.cpp:2540 msgid "Use pad" msgstr "" #: src/libslic3r/PrintConfig.cpp:2542 msgid "Add a pad underneath the supported model" msgstr "" #: src/libslic3r/PrintConfig.cpp:2547 msgid "Pad wall thickness" msgstr "" #: src/libslic3r/PrintConfig.cpp:2549 msgid "The thickness of the pad and its optional cavity walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2557 msgid "Pad wall height" msgstr "" #: src/libslic3r/PrintConfig.cpp:2558 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" #: src/libslic3r/PrintConfig.cpp:2571 msgid "Max merge distance" msgstr "" #: src/libslic3r/PrintConfig.cpp:2573 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" #: src/libslic3r/PrintConfig.cpp:2584 msgid "Pad edge radius" msgstr "" #: src/libslic3r/PrintConfig.cpp:2593 msgid "Pad wall slope" msgstr "" #: src/libslic3r/PrintConfig.cpp:2595 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" #: src/libslic3r/PrintConfig.cpp:2957 msgid "Export OBJ" msgstr "" #: src/libslic3r/PrintConfig.cpp:2958 msgid "Export the model(s) as OBJ." msgstr "" #: src/libslic3r/PrintConfig.cpp:2969 msgid "Export SLA" msgstr "" #: src/libslic3r/PrintConfig.cpp:2970 msgid "Slice the model and export SLA printing layers as PNG." msgstr "" #: src/libslic3r/PrintConfig.cpp:2975 msgid "Export 3MF" msgstr "" #: src/libslic3r/PrintConfig.cpp:2976 msgid "Export the model(s) as 3MF." msgstr "" #: src/libslic3r/PrintConfig.cpp:2980 msgid "Export AMF" msgstr "" #: src/libslic3r/PrintConfig.cpp:2981 msgid "Export the model(s) as AMF." msgstr "" #: src/libslic3r/PrintConfig.cpp:2985 msgid "Export STL" msgstr "" #: src/libslic3r/PrintConfig.cpp:2986 msgid "Export the model(s) as STL." msgstr "" #: src/libslic3r/PrintConfig.cpp:2991 msgid "Slice the model and export toolpaths as G-code." msgstr "" #: src/libslic3r/PrintConfig.cpp:2996 msgid "Slice" msgstr "" #: src/libslic3r/PrintConfig.cpp:2997 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" #: src/libslic3r/PrintConfig.cpp:3002 msgid "Help" msgstr "" #: src/libslic3r/PrintConfig.cpp:3003 msgid "Show this help." msgstr "" #: src/libslic3r/PrintConfig.cpp:3008 msgid "Help (FFF options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3009 msgid "Show the full list of print/G-code configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3013 msgid "Help (SLA options)" msgstr "" #: src/libslic3r/PrintConfig.cpp:3014 msgid "Show the full list of SLA print configuration options." msgstr "" #: src/libslic3r/PrintConfig.cpp:3018 msgid "Output Model Info" msgstr "" #: src/libslic3r/PrintConfig.cpp:3019 msgid "Write information about the model to the console." msgstr "" #: src/libslic3r/PrintConfig.cpp:3023 msgid "Save config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3024 msgid "Save configuration to the specified file." msgstr "" #: src/libslic3r/PrintConfig.cpp:3034 msgid "Align XY" msgstr "" #: src/libslic3r/PrintConfig.cpp:3035 msgid "Align the model to the given point." msgstr "" #: src/libslic3r/PrintConfig.cpp:3040 msgid "Cut model at the given Z." msgstr "" #: src/libslic3r/PrintConfig.cpp:3061 msgid "Center" msgstr "" #: src/libslic3r/PrintConfig.cpp:3062 msgid "Center the print around the given center." msgstr "" #: src/libslic3r/PrintConfig.cpp:3066 msgid "Don't arrange" msgstr "" #: src/libslic3r/PrintConfig.cpp:3067 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "" #: src/libslic3r/PrintConfig.cpp:3070 msgid "Duplicate" msgstr "" #: src/libslic3r/PrintConfig.cpp:3071 msgid "Multiply copies by this factor." msgstr "" #: src/libslic3r/PrintConfig.cpp:3075 msgid "Duplicate by grid" msgstr "" #: src/libslic3r/PrintConfig.cpp:3076 msgid "Multiply copies by creating a grid." msgstr "" #: src/libslic3r/PrintConfig.cpp:3079 msgid "Merge" msgstr "" #: src/libslic3r/PrintConfig.cpp:3080 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" #: src/libslic3r/PrintConfig.cpp:3085 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3089 msgid "Rotation angle around the Z axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3093 msgid "Rotate around X" msgstr "" #: src/libslic3r/PrintConfig.cpp:3094 msgid "Rotation angle around the X axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3098 msgid "Rotate around Y" msgstr "" #: src/libslic3r/PrintConfig.cpp:3099 msgid "Rotation angle around the Y axis in degrees." msgstr "" #: src/libslic3r/PrintConfig.cpp:3104 msgid "Scaling factor or percentage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3109 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" #: src/libslic3r/PrintConfig.cpp:3112 msgid "Scale to Fit" msgstr "" #: src/libslic3r/PrintConfig.cpp:3113 msgid "Scale to fit the given volume." msgstr "" #: src/libslic3r/PrintConfig.cpp:3122 msgid "Ignore non-existent config files" msgstr "" #: src/libslic3r/PrintConfig.cpp:3123 msgid "Do not fail if a file supplied to --load does not exist." msgstr "" #: src/libslic3r/PrintConfig.cpp:3126 msgid "Load config file" msgstr "" #: src/libslic3r/PrintConfig.cpp:3127 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" #: src/libslic3r/PrintConfig.cpp:3130 msgid "Output File" msgstr "" #: src/libslic3r/PrintConfig.cpp:3131 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" #: src/libslic3r/PrintConfig.cpp:3141 msgid "Data directory" msgstr "" #: src/libslic3r/PrintConfig.cpp:3142 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" #: src/libslic3r/PrintConfig.cpp:3145 msgid "Logging level" msgstr "" #: src/libslic3r/PrintConfig.cpp:3146 msgid "" "Messages with severity lower or eqal to the loglevel will be printed out. 0:" "trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal" msgstr "" #: src/libslic3r/PrintConfig.cpp:3151 msgid "Render with a software renderer" msgstr "" #: src/libslic3r/PrintConfig.cpp:3152 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" #: src/libslic3r/PrintObject.cpp:110 msgid "Processing triangulated mesh" msgstr "" #: src/libslic3r/PrintObject.cpp:141 msgid "Generating perimeters" msgstr "" #: src/libslic3r/PrintObject.cpp:251 msgid "Preparing infill" msgstr "" #: src/libslic3r/PrintObject.cpp:391 msgid "Generating support material" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:176 msgid "Mixed" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:396 msgid "Height (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:398 msgid "Width (mm)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:400 msgid "Speed (mm/s)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:402 msgid "Volumetric flow rate (mm3/s)" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:491 msgid "Default print color" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:495 #, possible-c-format msgid "up to %.2f mm" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:499 #, possible-c-format msgid "above %.2f mm" msgstr "" #: src/libslic3r/GCode/PreviewData.cpp:504 #, possible-c-format msgid "%.2f - %.2f mm" msgstr ""