# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2022-07-12 14:41+0200\n"
"PO-Revision-Date: 2019-05-23 00:37+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: tr_TR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:303
msgid "Portions copyright"
msgstr "Bölümler telif hakkı"

#: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:267
msgid "Copyright"
msgstr "Telif Hakkı"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:141
msgid ""
"License agreements of all following programs (libraries) are part of "
"application license agreement"
msgstr ""
"İlgili tüm programların (kütüphanelerin) lisans sözleşmeleri, ana uygulama "
"lisans sözleşmesinin bir parçasıdır"

#: src/slic3r/GUI/AboutDialog.cpp:210
#, c-format, boost-format
msgid "About %s"
msgstr "%s Hakkında"

#: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:367
#: src/slic3r/GUI/GUI_App.cpp:262
msgid "Version"
msgstr "Sürüm"

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:269 src/slic3r/GUI/GUI_App.cpp:268
msgid "is licensed under the"
msgstr "lisans türü"

#: src/slic3r/GUI/AboutDialog.cpp:270 src/slic3r/GUI/GUI_App.cpp:268
msgid "GNU Affero General Public License, version 3"
msgstr "GNU Affero Genel Kamu Lisansı, sürüm 3"

#: src/slic3r/GUI/AboutDialog.cpp:271
msgid ""
"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
"community."
msgstr ""
"PrusaSlicer, Alessandro Ranellucci ve RepRap topluluğuna ait olan Slic3r alt "
"yapısına sahiptir."

#: src/slic3r/GUI/AboutDialog.cpp:272
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""
"Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph "
"Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik ve diğerlerinin katkıları "
"ile."

#: src/slic3r/GUI/AboutDialog.cpp:308
msgid "Copy Version Info"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
#, boost-format
msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
msgid ""
"Please save your project and restart PrusaSlicer. We would be glad if you "
"reported the issue."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:204
msgid "Slicing complete"
msgstr "Dilimleme tamamlandı"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:199
#, boost-format
msgid "Masked SLA file exported to %1%"
msgstr "Dışa aktarılan maskelenmiş SLA dosyası %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:286
msgid "Access violation"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:288
msgid "Illegal instruction"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
msgid "Divide by zero"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:292
msgid "Overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:294
msgid "Underflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:297
msgid "Floating reserved operand"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:300
msgid "Stack overflow"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:659
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:726
msgid "Running post-processing scripts"
msgstr "İşlem sonrası komutlar çalıştırılıyor"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:690
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:710
msgid "Unknown error occured during exporting G-code."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:695
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
"card is write locked?\n"
"Error message: %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:698
#, boost-format
msgid ""
"Copying of the temporary G-code to the output G-code failed. There might be "
"problem with target device, please try exporting again or using different "
"device. The corrupted output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:701
#, boost-format
msgid ""
"Renaming of the G-code after copying to the selected destination folder has "
"failed. Current path is %1%.tmp. Please try exporting again."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:704
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the original code at %1% "
"couldn't be opened during copy check. The output G-code is at %2%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:707
#, boost-format
msgid ""
"Copying of the temporary G-code has finished but the exported code couldn't "
"be opened during copy check. The output G-code is at %1%.tmp."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:715
#, boost-format
msgid "G-code file exported to %1%"
msgstr "Dışa aktarılan G-code dosyası %1%"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:729
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""
"Geçici G-code bilgilerinin kalıcı G-code çıktısına kopyalanma işlemiş "
"başarısız oldu"

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:751
#, boost-format
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""
"%1% için karşıya yükleme planlanıyor. Bkz. Pencere -> Ana Bilgisayar Yükleme "
"Sırası"

#: src/slic3r/GUI/BedShapeDialog.cpp:31
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:218 src/slic3r/GUI/Plater.cpp:204
#: src/slic3r/GUI/Tab.cpp:2764
msgid "Size"
msgstr "Boyut"

#: src/slic3r/GUI/BedShapeDialog.cpp:32
msgid "Origin"
msgstr "Başlangıç Noktası"

#: src/slic3r/GUI/BedShapeDialog.cpp:33 src/libslic3r/PrintConfig.cpp:1016
msgid "Diameter"
msgstr "Çap"

#: src/slic3r/GUI/BedShapeDialog.cpp:49
msgid "Size in X and Y of the rectangular plate."
msgstr "Dikdörtgen tablanın X ve Y eksen ölçüsü."

#: src/slic3r/GUI/BedShapeDialog.cpp:58
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr "0,0 G-code koordinatının dikdörtgenin sol ön köşesine olan mesafesi."

#: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:262
#: src/slic3r/GUI/ConfigWizard.cpp:1476 src/slic3r/GUI/ConfigWizard.cpp:1490
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
#: src/slic3r/GUI/GCodeViewer.cpp:3181 src/slic3r/GUI/GCodeViewer.cpp:3187
#: src/slic3r/GUI/GCodeViewer.cpp:3195 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
#: src/slic3r/GUI/ObjectDataViewModel.cpp:134
#: src/slic3r/GUI/WipeTowerDialog.cpp:116 src/libslic3r/PrintConfig.cpp:262
#: src/libslic3r/PrintConfig.cpp:289 src/libslic3r/PrintConfig.cpp:296
#: src/libslic3r/PrintConfig.cpp:459 src/libslic3r/PrintConfig.cpp:519
#: src/libslic3r/PrintConfig.cpp:545 src/libslic3r/PrintConfig.cpp:620
#: src/libslic3r/PrintConfig.cpp:628 src/libslic3r/PrintConfig.cpp:678
#: src/libslic3r/PrintConfig.cpp:809 src/libslic3r/PrintConfig.cpp:820
#: src/libslic3r/PrintConfig.cpp:838 src/libslic3r/PrintConfig.cpp:1019
#: src/libslic3r/PrintConfig.cpp:1230 src/libslic3r/PrintConfig.cpp:1297
#: src/libslic3r/PrintConfig.cpp:1307 src/libslic3r/PrintConfig.cpp:1587
#: src/libslic3r/PrintConfig.cpp:1781 src/libslic3r/PrintConfig.cpp:1842
#: src/libslic3r/PrintConfig.cpp:1860 src/libslic3r/PrintConfig.cpp:1878
#: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:1951
#: src/libslic3r/PrintConfig.cpp:2065 src/libslic3r/PrintConfig.cpp:2074
#: src/libslic3r/PrintConfig.cpp:2093 src/libslic3r/PrintConfig.cpp:2114
#: src/libslic3r/PrintConfig.cpp:2126 src/libslic3r/PrintConfig.cpp:2134
#: src/libslic3r/PrintConfig.cpp:2175 src/libslic3r/PrintConfig.cpp:2183
#: src/libslic3r/PrintConfig.cpp:2193 src/libslic3r/PrintConfig.cpp:2201
#: src/libslic3r/PrintConfig.cpp:2209 src/libslic3r/PrintConfig.cpp:2271
#: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:2571
#: src/libslic3r/PrintConfig.cpp:2588 src/libslic3r/PrintConfig.cpp:2689
#: src/libslic3r/PrintConfig.cpp:2698 src/libslic3r/PrintConfig.cpp:2748
#: src/libslic3r/PrintConfig.cpp:2900 src/libslic3r/PrintConfig.cpp:2988
#: src/libslic3r/PrintConfig.cpp:2995 src/libslic3r/PrintConfig.cpp:3002
#: src/libslic3r/PrintConfig.cpp:3016 src/libslic3r/PrintConfig.cpp:3040
#: src/libslic3r/PrintConfig.cpp:3050 src/libslic3r/PrintConfig.cpp:3060
#: src/libslic3r/PrintConfig.cpp:3083 src/libslic3r/PrintConfig.cpp:3161
#: src/libslic3r/PrintConfig.cpp:3367 src/libslic3r/PrintConfig.cpp:3408
#: src/libslic3r/PrintConfig.cpp:3568 src/libslic3r/PrintConfig.cpp:3577
#: src/libslic3r/PrintConfig.cpp:3586 src/libslic3r/PrintConfig.cpp:3596
#: src/libslic3r/PrintConfig.cpp:3661 src/libslic3r/PrintConfig.cpp:3671
#: src/libslic3r/PrintConfig.cpp:3683 src/libslic3r/PrintConfig.cpp:3703
#: src/libslic3r/PrintConfig.cpp:3713 src/libslic3r/PrintConfig.cpp:3723
#: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3756
#: src/libslic3r/PrintConfig.cpp:3770 src/libslic3r/PrintConfig.cpp:3781
#: src/libslic3r/PrintConfig.cpp:3794 src/libslic3r/PrintConfig.cpp:3839
#: src/libslic3r/PrintConfig.cpp:3849 src/libslic3r/PrintConfig.cpp:3858
#: src/libslic3r/PrintConfig.cpp:3868 src/libslic3r/PrintConfig.cpp:3884
#: src/libslic3r/PrintConfig.cpp:3908
msgid "mm"
msgstr "mm"

#: src/slic3r/GUI/BedShapeDialog.cpp:66
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""
"Baskı tablasının çapı. Başlangıç noktasının (0,0) merkezde olduğu "
"varsayılmaktadır."

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Rectangular"
msgstr "Dikdörtgen"

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Circular"
msgstr "Dairesel"

#: src/slic3r/GUI/BedShapeDialog.cpp:81 src/slic3r/GUI/GUI_Preview.cpp:252
#: src/libslic3r/ExtrusionEntity.cpp:343 src/libslic3r/ExtrusionEntity.cpp:378
msgid "Custom"
msgstr "Özel"

#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:179
#: src/slic3r/GUI/GUI_ObjectList.cpp:1701
msgid "Shape"
msgstr "Şekil"

#: src/slic3r/GUI/BedShapeDialog.cpp:203
msgid "Load shape from STL..."
msgstr "STL dosyadan şekil yükle..."

#: src/slic3r/GUI/BedShapeDialog.cpp:249 src/slic3r/GUI/GCodeViewer.cpp:3709
#: src/slic3r/GUI/MainFrame.cpp:2143
msgid "Settings"
msgstr "Ayarlar"

#: src/slic3r/GUI/BedShapeDialog.cpp:273
msgid "Texture"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:283 src/slic3r/GUI/BedShapeDialog.cpp:354
msgid "Load..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/BedShapeDialog.cpp:362
#: src/slic3r/GUI/Tab.cpp:3750
msgid "Remove"
msgstr "Kaldır"

#: src/slic3r/GUI/BedShapeDialog.cpp:317 src/slic3r/GUI/BedShapeDialog.cpp:388
msgid "Not found:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:344
msgid "Model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:508
msgid "Choose an STL file to import bed shape from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:514 src/slic3r/GUI/BedShapeDialog.cpp:562
#: src/slic3r/GUI/BedShapeDialog.cpp:584
msgid "Invalid file format."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:525
msgid "Error! Invalid model"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:533
msgid "The selected file contains no geometry."
msgstr "Seçilen dosya geometri içermiyor."

#: src/slic3r/GUI/BedShapeDialog.cpp:537
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr "Seçilen dosya birçok ayrı alan içerir. Bu durum desteklennozülktedir."

#: src/slic3r/GUI/BedShapeDialog.cpp:552
msgid "Choose a file to import bed texture from (PNG/SVG):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:574
msgid "Choose an STL file to import bed model from:"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:95 src/slic3r/GUI/ConfigWizard.cpp:1396
msgid "Bed Shape"
msgstr "Tabla Şekli"

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr "Ağ araması"

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr "Adres"

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr "Ana bilgisayar adı"

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr "Servis ismi"

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr "OctoPrint sürümü"

#: src/slic3r/GUI/BonjourDialog.cpp:224
msgid "Searching for devices"
msgstr "Cihazlar aranıyor"

#: src/slic3r/GUI/BonjourDialog.cpp:231
msgid "Finished"
msgstr "Bitti"

#: src/slic3r/GUI/ButtonsDescription.cpp:42
msgid "Revert color to default"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:57
msgid "Value is the same as the system value"
msgstr "Girilen değer sistem değeriyle aynıdır"

#: src/slic3r/GUI/ButtonsDescription.cpp:58
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""
"Değer değiştirildi ve sistem değerine ya da son kaydedilen ön ayara eşit "
"değil"

#: src/slic3r/GUI/ButtonsDescription.cpp:62
msgid "Buttons And Text Colors Description"
msgstr "Düğme ve Metin Renk Açıklamaları"

#: src/slic3r/GUI/ConfigManipulation.cpp:49
msgid ""
"Layer height is not valid.\n"
"\n"
"The layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:50
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1449
#: src/libslic3r/PrintConfig.cpp:285
msgid "Layer height"
msgstr "Katman yüksekliği"

#: src/slic3r/GUI/ConfigManipulation.cpp:61
msgid ""
"First layer height is not valid.\n"
"\n"
"The first layer height will be reset to 0.01."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:62 src/libslic3r/PrintConfig.cpp:1226
msgid "First layer height"
msgstr "İlk katman yüksekliği"

#: src/slic3r/GUI/ConfigManipulation.cpp:82
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- Ensure vertical shell thickness enabled\n"
"- Detect thin walls disabled"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:90
msgid "Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:91
msgid "Spiral Vase"
msgstr "Spiral Vazo"

#: src/slic3r/GUI/ConfigManipulation.cpp:121
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0)."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:125
msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:126
#: src/slic3r/GUI/ConfigManipulation.cpp:146
msgid "Wipe Tower"
msgstr "Kule Sil"

#: src/slic3r/GUI/ConfigManipulation.cpp:142
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:145
msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:164
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:167
msgid "Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:168
msgid "Support Generator"
msgstr "Destek Üreticisi"

#: src/slic3r/GUI/ConfigManipulation.cpp:195
#, boost-format
msgid "The %1% infill pattern is not supposed to work at 100%% density."
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:198
msgid "Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/ConfigManipulation.cpp:199
#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
#: src/slic3r/GUI/Plater.cpp:460 src/slic3r/GUI/Tab.cpp:1503
#: src/slic3r/GUI/Tab.cpp:1505 src/libslic3r/PrintConfig.cpp:474
#: src/libslic3r/PrintConfig.cpp:715 src/libslic3r/PrintConfig.cpp:739
#: src/libslic3r/PrintConfig.cpp:1093 src/libslic3r/PrintConfig.cpp:1107
#: src/libslic3r/PrintConfig.cpp:1144 src/libslic3r/PrintConfig.cpp:1393
#: src/libslic3r/PrintConfig.cpp:1403 src/libslic3r/PrintConfig.cpp:1472
#: src/libslic3r/PrintConfig.cpp:1492 src/libslic3r/PrintConfig.cpp:1511
#: src/libslic3r/PrintConfig.cpp:2332 src/libslic3r/PrintConfig.cpp:2349
msgid "Infill"
msgstr "Dolgu"

#: src/slic3r/GUI/ConfigManipulation.cpp:338
msgid "Head penetration should not be greater than the head width."
msgstr "Kafa penetrasyonu kafa genişliğinden daha büyük olmamalıdır."

#: src/slic3r/GUI/ConfigManipulation.cpp:340
msgid "Invalid Head penetration"
msgstr "Geçersiz kafa penetrasyonu"

#: src/slic3r/GUI/ConfigManipulation.cpp:351
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "Pinhead çapı, sütun çapından daha küçük olmalıdır."

#: src/slic3r/GUI/ConfigManipulation.cpp:353
msgid "Invalid pinhead diameter"
msgstr "Geçersiz iğne başı çapı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
msgid "Upgrade"
msgstr "Sürüm yükselt"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Downgrade"
msgstr "Sürüm düşür"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "Before roll back"
msgstr "Geri almadan önce"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 src/libslic3r/PrintConfig.cpp:339
msgid "User"
msgstr "Kullanıcı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28
#: src/slic3r/GUI/GUI_Preview.cpp:238 src/libslic3r/ExtrusionEntity.cpp:329
msgid "Unknown"
msgstr "Bilinmiyor"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "Active"
msgstr "Aktif"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
msgid "PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1340
msgid "print"
msgstr "yazdır"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
msgid "filaments"
msgstr "filamentler"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1342
msgid "SLA print"
msgstr "SLA baskısı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
#: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
#: src/slic3r/GUI/Plater.cpp:821 src/libslic3r/Preset.cpp:1343
msgid "SLA material"
msgstr "SLA malzemesi"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1344
msgid "printer"
msgstr "yazıcı"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1366
msgid "vendor"
msgstr "üretici"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
msgid "version"
msgstr "sürüm"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76
msgid "min PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
msgid "max PrusaSlicer version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "model"
msgstr "model"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
msgid "variants"
msgstr "varyantlar"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93
#, c-format, boost-format
msgid "Incompatible with this %s"
msgstr "%s ile uyumsuz"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96
msgid "Activate"
msgstr "Etkinleştir"

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123
msgid "Configuration Snapshots"
msgstr "Yapılandırma Anlık Görüntüleri"

#: src/slic3r/GUI/ConfigWizard.cpp:262
msgid "nozzle"
msgstr "nozül"

#: src/slic3r/GUI/ConfigWizard.cpp:266
msgid "Alternate nozzles:"
msgstr "Alternatif nozüller:"

#: src/slic3r/GUI/ConfigWizard.cpp:330
msgid "All standard"
msgstr "Tüm standartlar"

#: src/slic3r/GUI/ConfigWizard.cpp:330
msgid "Standard"
msgstr "Standart"

#: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
#: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3832
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
msgid "All"
msgstr "Tümü"

#: src/slic3r/GUI/ConfigWizard.cpp:332 src/slic3r/GUI/ConfigWizard.cpp:652
#: src/slic3r/GUI/DoubleSlider.cpp:2030 src/slic3r/GUI/Plater.cpp:432
#: src/slic3r/GUI/Plater.cpp:579 src/slic3r/GUI/Preferences.cpp:436
#: src/libslic3r/PrintConfig.cpp:1286
msgid "None"
msgstr "Hiçbiri"

#: src/slic3r/GUI/ConfigWizard.cpp:484
#, c-format, boost-format
msgid "Welcome to the %s Configuration Assistant"
msgstr "%s Yapılandırma Asistanına Hoş Geldiniz"

#: src/slic3r/GUI/ConfigWizard.cpp:486
#, c-format, boost-format
msgid "Welcome to the %s Configuration Wizard"
msgstr "%s Yapılandırma Sihirbazına Hoş Geldiniz"

#: src/slic3r/GUI/ConfigWizard.cpp:488
msgid "Welcome"
msgstr "Hoşgeldiniz"

#: src/slic3r/GUI/ConfigWizard.cpp:490
#, c-format, boost-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""
"Merhaba, %s uygulamasına hoş geldiniz! Bu %s, ilk yapılandırmada size "
"yardımcı olacak ve sadece birkaç ayar yaptıktan sonra yazdırmaya hazır "
"olacaksınız."

#: src/slic3r/GUI/ConfigWizard.cpp:495
msgid "Remove user profiles (a snapshot will be taken beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:498
msgid ""
"Perform desktop integration (Sets this binary to be searchable by the "
"system)."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:550
#, c-format, boost-format
msgid "%s Family"
msgstr "%s Ailesi"

#: src/slic3r/GUI/ConfigWizard.cpp:640
msgid "Printer:"
msgstr "Yazıcı:"

#: src/slic3r/GUI/ConfigWizard.cpp:642
msgid "Vendor:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:643
msgid "Profile:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:720 src/slic3r/GUI/ConfigWizard.cpp:892
#: src/slic3r/GUI/ConfigWizard.cpp:952 src/slic3r/GUI/ConfigWizard.cpp:1088
msgid "(All)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752
#, boost-format
msgid ""
"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
"printers."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752 src/slic3r/GUI/ConfigWizard.cpp:2043
#: src/slic3r/GUI/ConfigWizard.cpp:2912
msgid "Filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:752
msgid "SLA materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:755
#, boost-format
msgid "All installed printers are compatible with the selected %1%."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1341
msgid "filament"
msgstr "filaman"

#: src/slic3r/GUI/ConfigWizard.cpp:778
msgid ""
"Only the following installed printers are compatible with the selected "
"filaments"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:779
msgid ""
"Only the following installed printers are compatible with the selected SLA "
"materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1175
msgid "Custom Printer Setup"
msgstr "Özel Yazıcı Ayarı"

#: src/slic3r/GUI/ConfigWizard.cpp:1175
msgid "Custom Printer"
msgstr "Özel Yazıcı"

#: src/slic3r/GUI/ConfigWizard.cpp:1177
msgid "Define a custom printer profile"
msgstr "Özel bir yazıcı profili tanımla"

#: src/slic3r/GUI/ConfigWizard.cpp:1179
msgid "Custom profile name:"
msgstr "Özel profil ismi:"

#: src/slic3r/GUI/ConfigWizard.cpp:1206
msgid "Automatic updates"
msgstr "Otomatik güncelleme"

#: src/slic3r/GUI/ConfigWizard.cpp:1206
msgid "Updates"
msgstr "Güncellemeler"

#: src/slic3r/GUI/ConfigWizard.cpp:1214
msgid "Check for application updates"
msgstr "Güncellemeleri kontrol et"

#: src/slic3r/GUI/ConfigWizard.cpp:1218
#, c-format, boost-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"Eğer etkinse, %s çevrimiçi olarak yeni uygulama sürümlerini kontrol eder. "
"Yeni bir sürüm kullanıma sunulduğunda, bir sonraki uygulama başlangıcında "
"(hiçbir zaman program kullanımı sırasında değil) bir bildirim görüntülenir. "
"Bu sadece bir bildirim mekanizmasıdır, otomatik kurulum yapılmaz."

#: src/slic3r/GUI/ConfigWizard.cpp:1224 src/slic3r/GUI/Preferences.cpp:175
msgid "Update built-in Presets automatically"
msgstr "Yerleşik Hazır Ayarları otomatik olarak güncelle"

#: src/slic3r/GUI/ConfigWizard.cpp:1228
#, c-format, boost-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Eğer etkinse, %s arka planda yerleşik sistem ön ayarları "
"güncelleştirmelerini indirir. Bu güncellemeler ayrı bir geçici konuma "
"indirilir. Yeni bir ön ayar sürümü kullanılabilir olduğunda, uygulama "
"başlangıcında sunulur."

#: src/slic3r/GUI/ConfigWizard.cpp:1231
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""
"Güncellemeler, kullanıcının izni olmadan asla uygulanmaz ve asla "
"kullanıcının kişisel ayarlarının üzerine yazılmaz."

#: src/slic3r/GUI/ConfigWizard.cpp:1236
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Ek olarak, bir güncelleme uygulanmadan önce tüm konfigürasyonun bir yedeği "
"oluşturulur."

#: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
#: src/slic3r/GUI/Plater.cpp:3569
msgid "Reload from disk"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1246
msgid ""
"Export full pathnames of models and parts sources into 3mf and amf files"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1250
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked.\n"
"If not enabled, the Reload from disk command will ask to select each file "
"using an open file dialog."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1259
msgid "Files association"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1261 src/slic3r/GUI/Preferences.cpp:157
msgid "Associate .3mf files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/Preferences.cpp:164
msgid "Associate .stl files to PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1272
msgid "View mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1274
msgid ""
"PrusaSlicer's user interfaces comes in three variants:\n"
"Simple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for "
"regular 3D printing. The other two offer progressively more sophisticated "
"fine-tuning, they are suitable for advanced and expert users, respectively."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1279
msgid "Simple mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1280
msgid "Advanced mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1281
msgid "Expert mode"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1287
msgid "The size of the object can be specified in inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1288
msgid "Use inches"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1322
msgid "Other Vendors"
msgstr "Diğer Üreticiler"

#: src/slic3r/GUI/ConfigWizard.cpp:1326
#, c-format, boost-format
msgid "Pick another vendor supported by %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1357
msgid "Firmware Type"
msgstr "Yazılım Türü"

#: src/slic3r/GUI/ConfigWizard.cpp:1357 src/slic3r/GUI/Tab.cpp:2365
msgid "Firmware"
msgstr "Yazılım"

#: src/slic3r/GUI/ConfigWizard.cpp:1361
msgid "Choose the type of firmware used by your printer."
msgstr "Yazıcınız tarafından kullanılan yazılım türünü seçin."

#: src/slic3r/GUI/ConfigWizard.cpp:1396
msgid "Bed Shape and Size"
msgstr "Tabla Şekil ve Ölçüsü"

#: src/slic3r/GUI/ConfigWizard.cpp:1399
msgid "Set the shape of your printer's bed."
msgstr "Yazıcı tablasının şeklini ayarlayın."

#: src/slic3r/GUI/ConfigWizard.cpp:1433 src/slic3r/GUI/Field.cpp:255
#: src/slic3r/GUI/Field.cpp:324 src/slic3r/GUI/Field.cpp:1561
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:435
msgid "Invalid numeric input."
msgstr "Geçersiz nümerik giriş."

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Filament and Nozzle Diameters"
msgstr "Filament ve Nozül Çapları"

#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Print Diameters"
msgstr "Baskı Çapları"

#: src/slic3r/GUI/ConfigWizard.cpp:1472
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "Yazıcınızın nozül çapını girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1475
msgid "Nozzle Diameter:"
msgstr "Nozül Çapı:"

#: src/slic3r/GUI/ConfigWizard.cpp:1485
msgid "Enter the diameter of your filament."
msgstr "Filament çapını girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1486
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"İyi bir hassasiyet gereklidir, bu nedenle bir kumpas kullanın ve filament "
"boyunca birçok ölçüm yapın, ardından ortalama değeri girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1489
msgid "Filament Diameter:"
msgstr "Filament Çapı:"

#: src/slic3r/GUI/ConfigWizard.cpp:1547
msgid "Nozzle and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1547
msgid "Temperatures"
msgstr "Sıcaklıklar"

#: src/slic3r/GUI/ConfigWizard.cpp:1563
msgid "Enter the temperature needed for extruding your filament."
msgstr "Filament ilerletmek için gereken sıcaklığı girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1564
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "Temel kural PLA için 160 ila 230 °C ve ABS için 215 ila 250 °C'dir."

#: src/slic3r/GUI/ConfigWizard.cpp:1567
msgid "Extrusion Temperature:"
msgstr "Ekstrüder Sıcaklığı:"

#: src/slic3r/GUI/ConfigWizard.cpp:1568 src/slic3r/GUI/ConfigWizard.cpp:1582
#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:1206
#: src/libslic3r/PrintConfig.cpp:1261 src/libslic3r/PrintConfig.cpp:2810
msgid "°C"
msgstr "°C"

#: src/slic3r/GUI/ConfigWizard.cpp:1577
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""
"Filamentin ısıtılmış tablaya yapışmasını sağlamak için gereken sıcaklığı "
"girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1578
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""
"Genel kural PLA için 60 °C ve ABS için 110 °C'dir. Isıtılmış tabla yoksa "
"sıfır girin."

#: src/slic3r/GUI/ConfigWizard.cpp:1581
msgid "Bed Temperature:"
msgstr "Tabla Sıcaklığı:"

#: src/slic3r/GUI/ConfigWizard.cpp:2043 src/slic3r/GUI/ConfigWizard.cpp:2915
msgid "SLA Materials"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2097
msgid "FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2102
msgid "SLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2338
#, boost-format
msgid ""
"Following printer profiles has no default filament: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2339
#, boost-format
msgid ""
"Following printer profiles has no default material: %1%Please select one "
"manually."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2340 src/slic3r/GUI/ConfigWizard.cpp:2438
#: src/slic3r/GUI/DoubleSlider.cpp:2522 src/slic3r/GUI/DoubleSlider.cpp:2543
#: src/slic3r/GUI/GUI.cpp:232
msgid "Notice"
msgstr "Bilgilendirme"

#: src/slic3r/GUI/ConfigWizard.cpp:2459
msgid "The following FFF printer models have no filament selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2463
msgid "Do you want to select default filaments for these FFF printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2477
msgid "The following SLA printer models have no materials selected:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2481
msgid "Do you want to select default SLA materials for these printer models?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2523
msgid "Configuration is edited in ConfigWizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2566
msgid "All user presets will be deleted."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2596
msgid "A new vendor was installed and one of its printers will be activated"
msgid_plural ""
"New vendors were installed and one of theirs printers will be activated"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/ConfigWizard.cpp:2625
msgid "Do you want to continue changing the configuration?"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2691
msgid "A new Printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2696
msgid "Some Printers were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2717
msgid "A new filament was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2718
msgid "A new SLA material was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2729
msgid "Some filaments were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2729
msgid "Some SLA materials were uninstalled."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2773
msgid "Custom printer was installed and it will be activated."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2858
msgid "Select all standard printers"
msgstr "Tüm standart yazıcıları seç"

#: src/slic3r/GUI/ConfigWizard.cpp:2861
msgid "< &Back"
msgstr "< &Geri"

#: src/slic3r/GUI/ConfigWizard.cpp:2862
msgid "&Next >"
msgstr "&İleri >"

#: src/slic3r/GUI/ConfigWizard.cpp:2863
msgid "&Finish"
msgstr "&Bitti"

#: src/slic3r/GUI/ConfigWizard.cpp:2864
#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:490
#: src/slic3r/GUI/FirmwareDialog.cpp:153
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
msgid "Cancel"
msgstr "İptal"

#: src/slic3r/GUI/ConfigWizard.cpp:2884
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF Teknoloji Yazıcılar"

#: src/slic3r/GUI/ConfigWizard.cpp:2892
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA Teknoloji Yazıcılar"

#: src/slic3r/GUI/ConfigWizard.cpp:2912
msgid "Filament Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:2912 src/slic3r/GUI/ConfigWizard.cpp:2915
#: src/slic3r/GUI/GUI_ObjectList.cpp:3781
msgid "Type:"
msgstr "Tür:"

#: src/slic3r/GUI/ConfigWizard.cpp:2915
msgid "SLA Material Profiles Selection"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:3036
msgid "Configuration Assistant"
msgstr "Yapılandırma Asistanı"

#: src/slic3r/GUI/ConfigWizard.cpp:3037
msgid "Configuration &Assistant"
msgstr "Yapılandırma &Asistanı"

#: src/slic3r/GUI/ConfigWizard.cpp:3039
msgid "Configuration Wizard"
msgstr "Yapılandırma Sihirbazını"

#: src/slic3r/GUI/ConfigWizard.cpp:3040
msgid "Configuration &Wizard"
msgstr "Yapılandırma Sihirbazı"

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
msgid ""
"Performing desktop integration failed - boost::filesystem::canonical did not "
"return appimage path."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
msgid "Performing desktop integration failed - Could not find executable."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:378
msgid ""
"Performing desktop integration failed because the application directory was "
"not found."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:419
msgid ""
"Performing desktop integration failed - could not create Gcodeviewer desktop "
"file. PrusaSlicer desktop file was probably created successfully."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
#: src/slic3r/GUI/GUI_App.cpp:2244
msgid "Desktop Integration"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:466
msgid ""
"Desktop Integration sets this binary to be searchable by the system.\n"
"\n"
"Press \"Perform\" to proceed."
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:480
msgid "Perform"
msgstr ""

#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:486
#: src/slic3r/GUI/GLCanvas3D.cpp:4699 src/slic3r/GUI/KBShortcutsDialog.cpp:97
#: src/slic3r/GUI/MainFrame.cpp:1338
msgid "Undo"
msgstr "Geri Al"

#: src/slic3r/GUI/DoubleSlider.cpp:109
msgid "Place bearings in slots and resume printing"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1379
msgid "One layer mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1381
msgid "Discard all custom changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1385 src/slic3r/GUI/DoubleSlider.cpp:2255
msgid "Jump to move"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1388
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"Set ruler mode\n"
"or Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1391
#, c-format, boost-format
msgid ""
"Jump to height %s\n"
"or Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1396
msgid "Edit current color - Right click the colored slider segment"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1398
msgid "This is wipe tower layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1408
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing sequentually."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1412
msgid "Print mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1426
msgid "Add extruder change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1428
msgid ""
"Add color change - Left click for predefined color or Shift + Left click for "
"custom color selection"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1430
msgid "Add color change - Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1431
msgid "or press \"+\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1433
msgid "Add another code - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1434
msgid "Add another code - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1440
msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1458
msgid "continue"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1466
#, boost-format
msgid "Color change (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1467
#, boost-format
msgid "Color change (\"%1%\") for Extruder %2%"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1469
#, boost-format
msgid "Pause print (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1471
#, boost-format
msgid "Custom template (\"%1%\")"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1473
#, boost-format
msgid "Extruder (tool) is changed to Extruder \"%1%\""
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1480
msgid "Note"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1482
msgid ""
"G-code associated to this tick mark is in a conflict with print mode.\n"
"Editing it will cause changes of Slider data."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1485
msgid ""
"There is a color change for extruder that won't be used till the end of "
"print job.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1488
msgid ""
"There is an extruder change set to the same extruder.\n"
"This code won't be processed during G-code generation."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1491
msgid ""
"There is a color change for extruder that has not been used before.\n"
"Check your settings to avoid redundant color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1496
msgid "Delete tick mark - Left click or press \"-\" key"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1498
msgid "Edit tick mark - Ctrl + Left click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1499
msgid "Edit tick mark - Right click"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1602 src/slic3r/GUI/DoubleSlider.cpp:1633
#: src/slic3r/GUI/GUI_Factories.cpp:778
#, c-format, boost-format
msgid "Extruder %d"
msgstr "Ekstrüder %d"

#: src/slic3r/GUI/DoubleSlider.cpp:1603 src/slic3r/GUI/GUI_Factories.cpp:779
msgid "active"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1612
msgid "Switch code to Change extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1612 src/slic3r/GUI/GUI_Factories.cpp:740
msgid "Change extruder"
msgstr "Ekstrüder değiştir"

#: src/slic3r/GUI/DoubleSlider.cpp:1613
msgid "Change extruder (N/A)"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1615 src/slic3r/GUI/GUI_Factories.cpp:787
msgid "Use another extruder"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1634
msgid "used"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1642
#, boost-format
msgid "Switch code to Color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1643
#, boost-format
msgid "Add color change (%1%) for:"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1968
msgid "Add color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1979
msgid "Add pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1983
msgid "Add custom template"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:1986
msgid "Add custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2004
msgid "Edit color"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2005
msgid "Edit pause print message"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2006
msgid "Edit custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2012
msgid "Delete color change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2013
msgid "Delete tool change"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2014
msgid "Delete pause print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2015
msgid "Delete custom G-code"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2025 src/slic3r/GUI/DoubleSlider.cpp:2255
msgid "Jump to height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2030
msgid "Hide ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2034
msgid "Show object height"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2034
msgid "Show object height on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2038
msgid "Show estimated print time"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2038
msgid "Show estimated print time on the ruler"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2042
msgid "Ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2042
msgid "Set ruler mode"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2047
msgid "Set extruder sequence for the entire print"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2051
msgid "Set auto color changes"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2086
msgid "This action will cause deletion of all ticks on vertical slider."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2087 src/slic3r/GUI/Tab.cpp:1318
msgid ""
"This action is not revertible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2088
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1133 src/slic3r/GUI/GUI.cpp:245
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:645
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:675
#: src/slic3r/GUI/WipeTowerDialog.cpp:58 src/slic3r/GUI/WipeTowerDialog.cpp:443
msgid "Warning"
msgstr "Uyarı"

#: src/slic3r/GUI/DoubleSlider.cpp:2216
msgid "Enter custom G-code used on current layer"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2217
#, boost-format
msgid "Custom G-code on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2238
msgid "Enter short message shown on Printer display when a print is paused"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2239
#, boost-format
msgid "Message for pause print on current layer (%1% mm)."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2254
msgid "Enter the move you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2254
msgid "Enter the height you want to jump to"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2515
msgid "The last color change data was saved for a single extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2516 src/slic3r/GUI/DoubleSlider.cpp:2532
msgid "The last color change data was saved for a multi extruder printing."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2518
msgid "Your current changes will delete all saved color changes."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2519 src/slic3r/GUI/DoubleSlider.cpp:2540
msgid "Are you sure you want to continue?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2533
msgid ""
"Select YES if you want to delete all saved tool changes, \n"
"NO if you want all tool changes switch to color changes, \n"
"or CANCEL to leave it unchanged."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2536
msgid "Do you want to delete all saved tool changes?"
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2538
msgid ""
"The last color change data was saved for a multi extruder printing with tool "
"changes for whole print."
msgstr ""

#: src/slic3r/GUI/DoubleSlider.cpp:2539
msgid "Your current changes will delete all saved extruder (tool) changes."
msgstr ""

#: src/slic3r/GUI/ExtraRenderers.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:538
#: src/slic3r/GUI/GUI_ObjectList.cpp:550 src/slic3r/GUI/GUI_ObjectList.cpp:979
#: src/slic3r/GUI/GUI_ObjectList.cpp:1966
#: src/slic3r/GUI/GUI_ObjectList.cpp:4282
#: src/slic3r/GUI/ObjectDataViewModel.cpp:250
#: src/slic3r/GUI/ObjectDataViewModel.cpp:352
#: src/slic3r/GUI/ObjectDataViewModel.cpp:376
#: src/slic3r/GUI/ObjectDataViewModel.cpp:607 src/libslic3r/PrintConfig.cpp:796
msgid "default"
msgstr "varsayılan"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
msgid "Set extruder sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
msgid "Set extruder change for every"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
#: src/libslic3r/PrintConfig.cpp:661 src/libslic3r/PrintConfig.cpp:1406
#: src/libslic3r/PrintConfig.cpp:2103 src/libslic3r/PrintConfig.cpp:2278
#: src/libslic3r/PrintConfig.cpp:2354 src/libslic3r/PrintConfig.cpp:2607
#: src/libslic3r/PrintConfig.cpp:2655 src/libslic3r/PrintConfig.cpp:2674
msgid "layers"
msgstr "katman"

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
msgid "Random sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
msgid "If enabled, random sequence of the selected extruders will be used."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
msgid "Allow next color repetition"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
msgid "If enabled, a repetition of the next random color will be allowed."
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
msgid "Set extruder(tool) sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
msgid "Remove extruder from sequence"
msgstr ""

#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
msgid "Add extruder to sequence"
msgstr ""

#: src/slic3r/GUI/Field.cpp:190
msgid "default value"
msgstr "varsayılan değer"

#: src/slic3r/GUI/Field.cpp:193
msgid "parameter name"
msgstr "parametre ismi"

#: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
msgid "N/A"
msgstr ""

#: src/slic3r/GUI/Field.cpp:226 src/slic3r/GUI/Field.cpp:298
#, c-format, boost-format
msgid "%s doesn't support percentage"
msgstr "%s yüzde değer desteklemiyor"

#: src/slic3r/GUI/Field.cpp:266
#, c-format, boost-format
msgid ""
"Input value is out of range\n"
"Are you sure that %s is a correct value and that you want to continue?"
msgstr ""

#: src/slic3r/GUI/Field.cpp:269 src/slic3r/GUI/Field.cpp:343
msgid "Parameter validation"
msgstr "Parametre doğrulama"

#: src/slic3r/GUI/Field.cpp:282 src/slic3r/GUI/Field.cpp:390
#: src/slic3r/GUI/Field.cpp:1573
msgid "Input value is out of range"
msgstr "Girilen değer limit dışı"

#: src/slic3r/GUI/Field.cpp:340
#, c-format, boost-format
msgid ""
"Do you mean %s%% instead of %s %s?\n"
"Select YES if you want to change this value to %s%%, \n"
"or NO if you are sure that %s %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:397
#, boost-format
msgid ""
"Invalid input format. Expected vector of dimensions in the following format: "
"\"%1%\""
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flash!"
msgstr "Yükle!"

#: src/slic3r/GUI/FirmwareDialog.cpp:154
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "Yükleme devam ediyor. Lütfen yazıcı bağlantısını kesmeyin!"

#: src/slic3r/GUI/FirmwareDialog.cpp:201
msgid "Flashing failed"
msgstr "Yükleme başarısız"

#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing succeeded!"
msgstr "Yükleme tamamlandı!"

#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing failed. Please see the avrdude log below."
msgstr "Yükleme başarısız. Lütfen aşağıdaki avrdude olay kaydına bakınız."

#: src/slic3r/GUI/FirmwareDialog.cpp:285
msgid "Flashing cancelled."
msgstr "Yükleme iptal edildi."

#: src/slic3r/GUI/FirmwareDialog.cpp:333
#, c-format, boost-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"Yazılım dosyası yazıcı modeli ile uyumlu değil.\n"
"Yazılımın ait olduğu yazıcı: %s\n"
"Mevcut yazıcı: %s\n"
"\n"
"Yine de bu yazılım dosyasını yüklemek istiyor musunuz?\n"
"Lütfen bu işlemin doğru olduğundan eminseniz devam ediniz."

#: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455
#, c-format, boost-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""
"Birden çok %s yazıcı bulundu. Lütfen yükleme için bir defada yalnızca birini "
"bağlayın."

#: src/slic3r/GUI/FirmwareDialog.cpp:437
#, c-format, boost-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"%s aygıtı bulunamadı.\n"
"Cihaz bağlıysa, lütfen USB konektörünün yanındaki Sıfırla düğmesine basın ..."

#: src/slic3r/GUI/FirmwareDialog.cpp:549
#, c-format, boost-format
msgid "The %s device could not have been found"
msgstr "%s cihazı bulunamadı"

#: src/slic3r/GUI/FirmwareDialog.cpp:650
#, c-format, boost-format
msgid "Error accessing port at %s: %s"
msgstr "%s konumundaki bağlantı noktasına erişim hatası: %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:652
#, c-format, boost-format
msgid "Error: %s"
msgstr "Hata : %s"

#: src/slic3r/GUI/FirmwareDialog.cpp:787
msgid "Firmware flasher"
msgstr "Yazılım yükleme"

#: src/slic3r/GUI/FirmwareDialog.cpp:812
msgid "Firmware image:"
msgstr "Yazılım dosyası:"

#: src/slic3r/GUI/FirmwareDialog.cpp:813
msgid "Select a file"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:815
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:297
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:372
msgid "Browse"
msgstr "Gözat"

#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Serial port:"
msgstr "Bağlantı noktası:"

#: src/slic3r/GUI/FirmwareDialog.cpp:819
msgid "Autodetected"
msgstr "Otomatik tanımlandı"

#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Rescan"
msgstr "Yenile"

#: src/slic3r/GUI/FirmwareDialog.cpp:827
msgid "Progress:"
msgstr "İlerleme:"

#: src/slic3r/GUI/FirmwareDialog.cpp:830
msgid "Status:"
msgstr "Durum:"

#: src/slic3r/GUI/FirmwareDialog.cpp:831
msgid "Ready"
msgstr "Hazır"

#: src/slic3r/GUI/FirmwareDialog.cpp:851
msgid "Advanced: Output log"
msgstr "Gelişmiş: Çıktı günlüğü"

#: src/slic3r/GUI/FirmwareDialog.cpp:862
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:310
#: src/slic3r/GUI/Mouse3DController.cpp:543
#: src/slic3r/GUI/PrintHostDialogs.cpp:261
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:122
msgid "Close"
msgstr "Kapat"

#: src/slic3r/GUI/FirmwareDialog.cpp:915
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"Yazılım yüklemesini iptal etmek istediğinize emin misiniz?\n"
"Bu işlem yazıcınızı kullanılamaz durumda bırakabilir!"

#: src/slic3r/GUI/FirmwareDialog.cpp:916
msgid "Confirmation"
msgstr "Onaylama"

#: src/slic3r/GUI/FirmwareDialog.cpp:919
msgid "Cancelling..."
msgstr "İptal ediliyor..."

#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1400
msgid "Shape Gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:76
msgid "Select shape from the gallery"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:100
msgid "Add to bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:101
msgid "Add selected shape(s) to the bed"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4151
msgid "Add"
msgstr "Ekle"

#: src/slic3r/GUI/GalleryDialog.cpp:117
msgid "Add one or more custom shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:118 src/slic3r/GUI/GalleryDialog.cpp:508
#: src/slic3r/GUI/GLCanvas3D.cpp:4490 src/slic3r/GUI/GUI_Factories.cpp:444
#: src/slic3r/GUI/Tab.cpp:3750
msgid "Delete"
msgstr "Sil"

#: src/slic3r/GUI/GalleryDialog.cpp:118
msgid "Delete one or more custom shape. You can't delete system shapes"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:402
msgid "Choose one or more files (STL, OBJ):"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:442
#, boost-format
msgid ""
"It looks like selected %1%-file has an error or is destructed.\n"
"We can't load this file"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:453
msgid "Choose one PNG file:"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:466
msgid "Replacing of the PNG"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:510
msgid "Change thumbnail"
msgstr ""

#: src/slic3r/GUI/GalleryDialog.cpp:551 src/slic3r/GUI/GalleryDialog.cpp:556
#, boost-format
msgid "Loading of the \"%1%\""
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:274
msgid "Tool position"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1457
msgid "Generating toolpaths"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1517
msgid "Generating vertex buffer"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:1857
msgid "Generating index buffers"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3052
msgid "Click to hide"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3052
msgid "Click to show"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3181
msgid "up to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3187
msgid "above"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3195
msgid "from"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3195
msgid "to"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3245 src/slic3r/GUI/GCodeViewer.cpp:3246
#: src/slic3r/GUI/GCodeViewer.cpp:3295
msgid "Percentage"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3256 src/slic3r/GUI/GCodeViewer.cpp:3295
#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:958
msgid "Feature type"
msgstr "Özellikler"

#: src/slic3r/GUI/GCodeViewer.cpp:3256 src/slic3r/GUI/GCodeViewer.cpp:3295
#: src/slic3r/GUI/RammingChart.cpp:90
msgid "Time"
msgstr "Zaman"

#: src/slic3r/GUI/GCodeViewer.cpp:3295 src/slic3r/GUI/GCodeViewer.cpp:3306
#: src/slic3r/GUI/GCodeViewer.cpp:3566
msgid "Used filament"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3298
msgid "Height (mm)"
msgstr "Yükseklik (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3299
msgid "Width (mm)"
msgstr "Genişlik (mm)"

#: src/slic3r/GUI/GCodeViewer.cpp:3300
msgid "Speed (mm/s)"
msgstr "Hız (mm / s)"

#: src/slic3r/GUI/GCodeViewer.cpp:3301
msgid "Fan Speed (%)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3302
msgid "Temperature (°C)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3303
msgid "Volumetric flow rate (mm³/s)"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3306 src/slic3r/GUI/GUI_Preview.cpp:224
#: src/slic3r/GUI/GUI_Preview.cpp:958
msgid "Tool"
msgstr "Araç"

#: src/slic3r/GUI/GCodeViewer.cpp:3309 src/slic3r/GUI/GUI_Preview.cpp:225
#: src/slic3r/GUI/GUI_Preview.cpp:957
msgid "Color Print"
msgstr "Renkli baskı"

#: src/slic3r/GUI/GCodeViewer.cpp:3347 src/slic3r/GUI/GCodeViewer.cpp:3393
#: src/slic3r/GUI/GCodeViewer.cpp:3398 src/slic3r/GUI/GUI_ObjectList.cpp:312
#: src/slic3r/GUI/wxExtensions.cpp:536 src/libslic3r/PrintConfig.cpp:791
msgid "Extruder"
msgstr "Ekstrüder"

#: src/slic3r/GUI/GCodeViewer.cpp:3370
msgid "Default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3393
msgid "default color"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3491 src/slic3r/GUI/GCodeViewer.cpp:3547
msgid "Color change"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3510 src/slic3r/GUI/GCodeViewer.cpp:3545
msgid "Print"
msgstr "Yazdır"

#: src/slic3r/GUI/GCodeViewer.cpp:3546 src/slic3r/GUI/GCodeViewer.cpp:3580
msgid "Pause"
msgstr "Duraklat"

#: src/slic3r/GUI/GCodeViewer.cpp:3563 src/slic3r/GUI/GCodeViewer.cpp:3566
msgid "Event"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3563 src/slic3r/GUI/GCodeViewer.cpp:3566
msgid "Remaining time"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3563 src/slic3r/GUI/GCodeViewer.cpp:3566
msgid "Duration"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3609 src/slic3r/GUI/GUI_Preview.cpp:1049
#: src/libslic3r/PrintConfig.cpp:2905
msgid "Travel"
msgstr "Boşta ilerleme"

#: src/slic3r/GUI/GCodeViewer.cpp:3612
msgid "Movement"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3613
msgid "Extrusion"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3614 src/slic3r/GUI/Tab.cpp:1869
#: src/slic3r/GUI/Tab.cpp:2811
msgid "Retraction"
msgstr "Geri çekme"

#: src/slic3r/GUI/GCodeViewer.cpp:3631 src/slic3r/GUI/GCodeViewer.cpp:3634
#: src/slic3r/GUI/GUI_Preview.cpp:1050
msgid "Wipe"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3666 src/slic3r/GUI/GUI_Preview.cpp:257
#: src/slic3r/GUI/GUI_Preview.cpp:272
msgid "Options"
msgstr "Ayarlar"

#: src/slic3r/GUI/GCodeViewer.cpp:3669 src/slic3r/GUI/GUI_Preview.cpp:1051
msgid "Retractions"
msgstr "Geri Çekme"

#: src/slic3r/GUI/GCodeViewer.cpp:3670 src/slic3r/GUI/GUI_Preview.cpp:1052
msgid "Deretractions"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3671 src/slic3r/GUI/GUI_Preview.cpp:1053
msgid "Seams"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3672 src/slic3r/GUI/GUI_Preview.cpp:1054
msgid "Tool changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3673 src/slic3r/GUI/GUI_Preview.cpp:1055
msgid "Color changes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3674 src/slic3r/GUI/GUI_Preview.cpp:1056
msgid "Print pauses"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3675 src/slic3r/GUI/GUI_Preview.cpp:1057
msgid "Custom G-codes"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3695 src/slic3r/GUI/GCodeViewer.cpp:3714
#: src/slic3r/GUI/GUI.cpp:341 src/slic3r/GUI/Plater.cpp:822
#: src/libslic3r/PrintConfig.cpp:321
msgid "Printer"
msgstr "Yazıcı"

#: src/slic3r/GUI/GCodeViewer.cpp:3697 src/slic3r/GUI/GCodeViewer.cpp:3719
#: src/slic3r/GUI/GUI.cpp:337 src/slic3r/GUI/Plater.cpp:818
msgid "Print settings"
msgstr "Baskı ayarları"

#: src/slic3r/GUI/GCodeViewer.cpp:3700 src/slic3r/GUI/GCodeViewer.cpp:3726
#: src/slic3r/GUI/GUI.cpp:339 src/slic3r/GUI/Plater.cpp:819
#: src/slic3r/GUI/Tab.cpp:1969 src/slic3r/GUI/Tab.cpp:1970
msgid "Filament"
msgstr "Filament"

#: src/slic3r/GUI/GCodeViewer.cpp:3739
msgid "Estimated printing times"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3758
msgid "Normal mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3759
msgid "Stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3766 src/libslic3r/PrintConfig.cpp:1184
#: src/libslic3r/PrintConfig.cpp:1202 src/libslic3r/PrintConfig.cpp:1212
#: src/libslic3r/PrintConfig.cpp:1257
msgid "First layer"
msgstr "İlk katman"

#: src/slic3r/GUI/GCodeViewer.cpp:3767
msgid "Total"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3796
msgid "Show stealth mode"
msgstr ""

#: src/slic3r/GUI/GCodeViewer.cpp:3800
msgid "Show normal mode"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:225 src/slic3r/GUI/GLCanvas3D.cpp:4637
#: src/slic3r/GUI/ObjectDataViewModel.cpp:53
msgid "Variable layer height"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:227
msgid "Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:229
msgid "Add detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:231
msgid "Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:233
msgid "Remove detail"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:235
msgid "Shift + Left mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:237
msgid "Reset to base"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:239
msgid "Shift + Right mouse button:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:241
msgid "Smoothing"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:243
msgid "Mouse wheel:"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:245
msgid "Increase/decrease edit area"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:248
msgid "Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:254
msgid "Quality / Speed"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:257
msgid "Higher print quality versus higher print speed."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:268
msgid "Smooth"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:274 src/libslic3r/PrintConfig.cpp:815
msgid "Radius"
msgstr "Yarıçap"

#: src/slic3r/GUI/GLCanvas3D.cpp:286
msgid "Keep min"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:295 src/slic3r/GUI/GLCanvas3D.cpp:4066
msgid "Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:561
msgid "Variable layer height - Manual edit"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:676
msgid "Seq."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1265
msgid "Variable layer height - Reset"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1273
msgid "Variable layer height - Adaptive"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1281
msgid "Variable layer height - Smooth all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:1688
msgid "Mirror Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2567
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:560
msgid "Gizmo-Move"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:2650
#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:562
msgid "Gizmo-Rotate"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3255
msgid "Move Object"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3776 src/slic3r/GUI/GLCanvas3D.cpp:4598
msgid "Switch to Settings"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3777 src/slic3r/GUI/GLCanvas3D.cpp:4598
msgid "Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3778 src/slic3r/GUI/GLCanvas3D.cpp:4599
msgid "Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3778 src/slic3r/GUI/GLCanvas3D.cpp:4599
msgid "Material Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3779 src/slic3r/GUI/GLCanvas3D.cpp:4600
msgid "Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3926
msgid "Undo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3926
msgid "Redo History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3946
#, c-format, boost-format
msgid "Undo %1$d Action"
msgid_plural "Undo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3946
#, c-format, boost-format
msgid "Redo %1$d Action"
msgid_plural "Redo %1$d Actions"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3966 src/slic3r/GUI/GLCanvas3D.cpp:4616
#: src/slic3r/GUI/KBShortcutsDialog.cpp:106 src/slic3r/GUI/Search.cpp:426
msgid "Search"
msgstr "Ara"

#: src/slic3r/GUI/GLCanvas3D.cpp:3980 src/slic3r/GUI/GLCanvas3D.cpp:3988
#: src/slic3r/GUI/Search.cpp:432
msgid "Enter a search term"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4019
msgid "Arrange options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4049
#, boost-format
msgid "Press %1%left mouse button to enter the exact value"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4051
msgid "Spacing"
msgstr "Aralık"

#: src/slic3r/GUI/GLCanvas3D.cpp:4058
msgid "Enable rotations (slow)"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4076 src/slic3r/GUI/GLCanvas3D.cpp:4508
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Plater.cpp:1664
msgid "Arrange"
msgstr "Hizala"

#: src/slic3r/GUI/GLCanvas3D.cpp:4482
msgid "Add..."
msgstr "Ekle..."

#: src/slic3r/GUI/GLCanvas3D.cpp:4499 src/slic3r/GUI/KBShortcutsDialog.cpp:96
#: src/slic3r/GUI/Plater.cpp:5496 src/slic3r/GUI/Tab.cpp:4157
msgid "Delete all"
msgstr "Tümünü sil"

#: src/slic3r/GUI/GLCanvas3D.cpp:4508 src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Arrange selection"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4508
msgid "Click right mouse button to show arrangement options"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4530
msgid "Copy"
msgstr "Kopyala"

#: src/slic3r/GUI/GLCanvas3D.cpp:4539
msgid "Paste"
msgstr "Yapıştır"

#: src/slic3r/GUI/GLCanvas3D.cpp:4551 src/slic3r/GUI/GUI_Factories.cpp:1084
#: src/slic3r/GUI/GUI_Factories.cpp:1108 src/slic3r/GUI/GUI_Factories.cpp:1119
msgid "Add instance"
msgstr "Kopyasını ekle"

#: src/slic3r/GUI/GLCanvas3D.cpp:4562 src/slic3r/GUI/GUI_Factories.cpp:1087
msgid "Remove instance"
msgstr "Kopyayı sil"

#: src/slic3r/GUI/GLCanvas3D.cpp:4575
msgid "Split to objects"
msgstr "Nesnelere böl"

#: src/slic3r/GUI/GLCanvas3D.cpp:4585
msgid "Split to parts"
msgstr "Paçalara böl"

#: src/slic3r/GUI/GLCanvas3D.cpp:4699 src/slic3r/GUI/GLCanvas3D.cpp:4738
msgid "Click right mouse button to open/close History"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4722
#, boost-format
msgid "Next Undo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:4738 src/slic3r/GUI/KBShortcutsDialog.cpp:98
#: src/slic3r/GUI/MainFrame.cpp:1341
msgid "Redo"
msgstr "Yinele"

#: src/slic3r/GUI/GLCanvas3D.cpp:4760
#, boost-format
msgid "Next Redo action: %1%"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6377
msgid "An object outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6378
msgid "A toolpath outside the print area was detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6379
msgid "SLA supports outside the print area were detected."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6380
msgid "Some objects are not visible during editing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6382
msgid ""
"An object outside the print area was detected.\n"
"Resolve the current problem to continue slicing."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6456
msgid "Selection-Add from rectangle"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:6471
msgid "Selection-Remove from rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:160 src/libslic3r/PrintConfig.cpp:4471
msgid "Cut"
msgstr "Kes"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:320
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:478
msgid "in"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
msgid "Keep upper part"
msgstr "Üst parçayi koru"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195
msgid "Keep lower part"
msgstr "Alt parçayi koru"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:196
msgid "Rotate lower part upwards"
msgstr "Alt kismi yukari dogru çevir"

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:201
msgid "Perform cut"
msgstr "Kesme islemini uygula"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
#: src/slic3r/GUI/ObjectDataViewModel.cpp:49
msgid "Paint-on supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
msgid "Clipping of view"
msgstr "Görünüm kırpma"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
msgid "Reset direction"
msgstr "Yönü sıfırla"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
msgid "Brush size"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
msgid "Brush shape"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
msgid "Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
msgid "Enforce supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
msgid "Right mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:434
msgid "Block supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
msgid "Shift + Left mouse button"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:429
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250
msgid "Remove selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
msgid "Remove all selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
msgid "Circle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Sphere"
msgstr "Küre"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:68
#: src/libslic3r/PrintConfig.cpp:1167
msgid "Triangles"
msgstr "Üçgenler"

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
msgid "Highlight overhang by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
msgid "Enforce"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
msgid "Tool type"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
msgid "Brush"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:128
msgid "Smart fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:131
msgid "Smart fill angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:132
msgid "Split triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:67
msgid "On overhangs only"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:174
#, boost-format
msgid ""
"Preselects faces by overhang angle. It is possible to restrict paintable "
"facets to only preselected faces when the option \"%1%\" is enabled."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:217
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:378
msgid "Paints facets according to the chosen painting brush."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:391
msgid ""
"Paints neighboring facets whose relative angle is less or equal to set angle."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:229
#, boost-format
msgid "Allows painting only on facets selected by: \"%1%\""
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:244
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:419
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:144
msgid "Paints all facets inside, regardless of their orientation."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:253
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:428
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:152
msgid "Ignores facets facing away from the camera."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:262
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:437
msgid "Paints only one facet."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:270
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:462
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:132
msgid "Alt + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:275
msgid "Splits bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:308
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:483
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:170
msgid "Ctrl + Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:313
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:488
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:175
msgid "Reset selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:364
msgid "Block supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:365
msgid "Add supports by angle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:432
msgid "Add supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:41
msgid "Place on face"
msgstr "Yüzeye yerleştir"

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
msgid "Hollow this object"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
msgid "Preview hollowed and drilled model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
msgid "Offset"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:57
msgid "Quality"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
#: src/libslic3r/PrintConfig.cpp:3900
msgid "Closing distance"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
msgid "Hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
msgid "Hole depth"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
msgid "Remove selected holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
msgid "Remove all holes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
msgid "Show supports"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:287
msgid "Add drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:403
msgid "Delete drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:590
msgid "Hollowing parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:667
msgid "Change drainage hole diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:761
msgid "Hollow and drill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:811
msgid "Move drainage hole"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:27
#, boost-format
msgid ""
"Your printer has more extruders than the multi-material painting gizmo "
"supports. For this reason, only the first %1% extruders will be able to be "
"used for painting."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:45
#: src/slic3r/GUI/ObjectDataViewModel.cpp:51
msgid "Multimaterial painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
msgid "First color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
msgid "Second color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:120
#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:671
msgid "Remove painted color"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
msgid "Clear all"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:129
msgid "Bucket fill"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:404
msgid "Paints neighboring facets that have the same color."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450
msgid "Split bigger facets into smaller ones while the object is painted."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:674
#, boost-format
msgid "Painted using: Extruder %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:55
msgid "Move"
msgstr "Taşı"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:466
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:543
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
#: src/libslic3r/PrintConfig.cpp:4525
msgid "Rotate"
msgstr "Çevir"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:505
msgid "Optimize orientation"
msgstr "Yönlendirmeyi optimize et"

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:552
#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:319
msgid "Apply"
msgstr "Uygula"

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:579
#: src/libslic3r/PrintConfig.cpp:4540
msgid "Scale"
msgstr "Ölçek"

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:253
msgid "Enforce seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:255
msgid "Block seam"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
msgid "Seam painting"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:67
msgid "Mesh name"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:69
msgid "Detail level"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:70
msgid "Decimate ratio"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:113
#, boost-format
msgid ""
"Processing model '%1%' with more than 1M triangles could be slow. It is "
"highly recommend to reduce amount of triangles."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:116
#: src/slic3r/GUI/GUI_Factories.cpp:705
msgid "Simplify model"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:143
msgid "Simplify"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:156
msgid "Simplification is currently only allowed when a single part is selected"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:157
#: src/slic3r/GUI/MainFrame.cpp:1165 src/slic3r/GUI/MainFrame.cpp:1622
#: src/slic3r/GUI/PrintHostDialogs.cpp:373
msgid "Error"
msgstr "Hata"

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:250
msgid "Extra high"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:251
msgid "High"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:252
msgid "Medium"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:253
msgid "Low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:254
msgid "Extra low"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:304
#, c-format, boost-format
msgid "%d triangles"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:307
msgid "Show wireframe"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:313
msgid "Operation already cancelling. Please wait few seconds."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:322
msgid "Can't apply when proccess preview."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:329
#, boost-format
msgid "Process %1% / 100"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:479
#, boost-format
msgid "Simplify %1%"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
msgid "Head diameter"
msgstr "Başlık çapı"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
msgid "Lock supports under new islands"
msgstr "Yeni adalardaki destekleri kilitle"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
msgid "Remove selected points"
msgstr "Seçilen noktaları kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
msgid "Remove all points"
msgstr "Tüm noktaları kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1226
msgid "Apply changes"
msgstr "Değişiklikleri uygula"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1227
msgid "Discard changes"
msgstr "Değişiklikleri iptal et"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
msgid "Minimal points distance"
msgstr "En düşük nokta mesafesi"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
#: src/libslic3r/PrintConfig.cpp:3730
msgid "Support points density"
msgstr "Destek noktaları yoğunluğu"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1229
msgid "Auto-generate points"
msgstr "Noktaları otomatik oluştur"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Manual editing"
msgstr "Manuel düzenleme"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:372
msgid "Add support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:522
msgid "Delete support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:702
msgid "Change point head diameter"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:770
msgid "Support parameter change"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:876
msgid "SLA Support Points"
msgstr "SLA Destek Noktaları"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
msgid "Do you want to save your manually edited support points?"
msgstr "El ile düzenlenen destek noktalarınızı kaydetmek ister misiniz?"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:898
msgid "Save support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:958
msgid "Move support point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1051
msgid "Support points edit"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1131
msgid "Autogeneration will erase all manually edited points."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1132
msgid "Are you sure you want to do it?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1138
msgid "Autogenerate support points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1186
msgid "SLA gizmo keyboard shortcuts"
msgstr "SLA gizmo klavye kısayolları"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1197
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr "Not: Bazı kısayollar yalnızca düzenleme modunda çalışır."

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Left click"
msgstr "Sol tık"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
msgid "Add point"
msgstr "Nokta ekle"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
msgid "Right click"
msgstr "Sağ tık"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
msgid "Remove point"
msgstr "Noktayı kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
msgid "Drag"
msgstr "Sürükle"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
msgid "Move point"
msgstr "Hareket noktası"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
msgid "Add point to selection"
msgstr "Seçime nokta ekle"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
msgid "Remove point from selection"
msgstr "Seçimden noktayı kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
msgid "Select by rectangle"
msgstr "Dikdörtgene göre seç"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
msgid "Deselect by rectangle"
msgstr "Dikdörtgene göre seçimi kaldır"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
msgid "Select all points"
msgstr "Tüm noktaları seç"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
msgid "Mouse wheel"
msgstr "Fare tekerleği"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
msgid "Move clipping plane"
msgstr "Kırpma düzlemini taşı"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1225
msgid "Reset clipping plane"
msgstr "Kırpma düzlemini sıfırla"

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1228
msgid "Switch to editing mode"
msgstr "Düzenleme moduna geç"

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:196
msgid ""
"ERROR: Please close all manipulators available from the left toolbar first"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:561
msgid "Gizmo-Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:673
msgid "Gizmo-Place on Face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1270
msgid ""
"You are currently editing SLA support points. Please, apply or discard your "
"changes first."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:292
msgid "Undefined"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:317
#, boost-format
msgid "%1% was substituted with %2%"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:326
msgid ""
"Most likely the configuration was produced by a newer version of PrusaSlicer "
"or by some PrusaSlicer fork."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:327
msgid "The following values were substituted:"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:328
msgid "Review the substitutions and adjust them if needed."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:338 src/slic3r/GUI/Plater.cpp:820
msgid "SLA print settings"
msgstr "SLA yazdırma ayarları"

#: src/slic3r/GUI/GUI.cpp:342 src/slic3r/GUI/PhysicalPrinterDialog.cpp:157
msgid "Physical Printer"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:355
msgid ""
"Configuration bundle was loaded, however some configuration values were not "
"recognized."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:365
#, boost-format
msgid ""
"Configuration file \"%1%\" was loaded, however some configuration values "
"were not recognized."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:266
msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:267
msgid "Developed by Prusa Research."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:269
msgid ""
"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:270
msgid "Artwork model by Leslie Ing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:411
#, boost-format
msgid ""
"Starting with %1% 2.3, configuration directory on Linux has changed "
"(according to XDG Base Directory Specification) to \n"
"%2%.\n"
"\n"
"This directory did not exist yet (maybe you run the new version for the "
"first time).\n"
"However, an old %1% configuration directory was detected in \n"
"%3%.\n"
"\n"
"Consider moving the contents of the old directory to the new location in "
"order to access your profiles, etc.\n"
"Note that if you decide to downgrade %1% in future, it will use the old "
"location again.\n"
"\n"
"What do you want to do now?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:419
#, c-format, boost-format
msgid "%s - BREAKING CHANGE"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:421
msgid "Quit, I will move my data now"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:421
msgid "Start the application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:698
#, c-format, boost-format
msgid ""
"%s has encountered an error. It was likely caused by running out of memory. "
"If you are sure you have enough RAM on your system, this may also be a bug "
"and we would be glad if you reported it.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:701
msgid "Fatal error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:705
msgid ""
"PrusaSlicer has encountered a localization error. Please report to "
"PrusaSlicer team, what language was active and in which scenario this issue "
"happened. Thank you.\n"
"\n"
"The application will now terminate."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:708
msgid "Critical error"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:713
#, boost-format
msgid "Internal error: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:908 src/slic3r/GUI/GUI_App.cpp:1006
msgid ""
"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error. Your user profiles will "
"not be affected."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:914 src/slic3r/GUI/GUI_App.cpp:1012
msgid ""
"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
"manually delete the file to recover from the error."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:961
#, boost-format
msgid "You are opening %1% version %2%."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:964
#, boost-format
msgid ""
"The active configuration was created by <b>%1% %2%</b>,\n"
"while a newer configuration was found in <b>%3%</b>\n"
"created by <b>%1% %4%</b>.\n"
"\n"
"Shall the newer configuration be imported?\n"
"If so, your active configuration will be backed up before importing the new "
"configuration."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:972
#, boost-format
msgid ""
"An existing configuration was found in <b>%3%</b>\n"
"created by <b>%1% %2%</b>.\n"
"\n"
"Shall this configuration be imported?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:980
msgid "Import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:981
msgid "Don't import"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:989
msgid "Continue and import newer configuration?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1050
msgid ""
"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
"available in the system.\n"
"Please download and install a 64 bit build of PrusaSlicer from https://www."
"prusa3d.cz/prusaslicer/.\n"
"Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1133
#, c-format, boost-format
msgid ""
"%s\n"
"Do you want to continue?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1135 src/slic3r/GUI/GUI_App.cpp:3100
#: src/slic3r/GUI/Plater.cpp:1726 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
msgid "Remember my choice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1177
msgid "Loading configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1208
#, boost-format
msgid "New release version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1209
msgid "See Download page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1223
#, boost-format
msgid "New prerelease version %1% is available."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1224
msgid "See Releases page."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1261
msgid "Preparing settings tabs"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1335 src/slic3r/GUI/Preferences.cpp:287
msgid "Restore window position on start"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1337
msgid "PrusaSlicer started after a crash"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1338
#, boost-format
msgid ""
"PrusaSlicer crashed last time when attempting to set window position.\n"
"We are sorry for the inconvenience, it unfortunately happens with certain "
"multiple-monitor setups.\n"
"More precise reason for the crash: \"%1%\".\n"
"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
"\n"
"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
"Otherwise, the application will most likely crash again next time."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1350
#, boost-format
msgid "Disable \"%1%\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1351
#, boost-format
msgid "Leave \"%1%\" enabled"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1678
msgid ""
"You have the following presets with saved options for \"Print Host upload\""
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1682
msgid ""
"But since this version of PrusaSlicer we don't show this information in "
"Printer Settings anymore.\n"
"Settings will be available in physical printers settings."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1684
msgid ""
"By default new Printer devices will be named as \"Printer N\" during its "
"creation.\n"
"Note: This name can be changed later from the physical printers settings"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1688 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
msgid "Information"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1701 src/slic3r/GUI/GUI_App.cpp:1712
msgid "Recreating"
msgstr "Yeniden oluşturma"

#: src/slic3r/GUI/GUI_App.cpp:1715
msgid "Loading of current presets"
msgstr "Geçerli hazır ayarlar yükleniyor"

#: src/slic3r/GUI/GUI_App.cpp:1720
msgid "Loading of a mode view"
msgstr "Mod görünümü yükleniyor"

#: src/slic3r/GUI/GUI_App.cpp:1858
msgid "Choose one file (3MF/AMF):"
msgstr "Bir dosya seçin (3MF/AMF):"

#: src/slic3r/GUI/GUI_App.cpp:1870
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Bir veya daha fazla dosya seçin (STL / OBJ / AMF / 3MF / PRUSA):"

#: src/slic3r/GUI/GUI_App.cpp:1882
msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:1893
msgid "Changing of an application language"
msgstr "Bir uygulama dilinin değiştirilmesi"

#: src/slic3r/GUI/GUI_App.cpp:2032
msgid "Select the language"
msgstr "Dil seçiniz"

#: src/slic3r/GUI/GUI_App.cpp:2032
msgid "Language"
msgstr "Dil"

#: src/slic3r/GUI/GUI_App.cpp:2181
msgid "modified"
msgstr "değiştirilmiş"

#: src/slic3r/GUI/GUI_App.cpp:2235
#, c-format, boost-format
msgid "Run %s"
msgstr "%s başlat"

#: src/slic3r/GUI/GUI_App.cpp:2239
msgid "&Configuration Snapshots"
msgstr "&Yapılandırma Anlık Görüntüleri"

#: src/slic3r/GUI/GUI_App.cpp:2239
msgid "Inspect / activate configuration snapshots"
msgstr "Yapılandırma anlık görüntülerini inceleme/etkinleştirme"

#: src/slic3r/GUI/GUI_App.cpp:2240
msgid "Take Configuration &Snapshot"
msgstr "Yapılandırma &Anlık Görüntüsü Al"

#: src/slic3r/GUI/GUI_App.cpp:2240
msgid "Capture a configuration snapshot"
msgstr "Yapılandırma anlık görüntüsünü kaydet"

#: src/slic3r/GUI/GUI_App.cpp:2241
msgid "Check for Configuration Updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2241
msgid "Check for configuration updates"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2248
msgid "&Preferences"
msgstr "&Tercihler"

#: src/slic3r/GUI/GUI_App.cpp:2254
msgid "Application preferences"
msgstr "Uygulama tercihleri"

#: src/slic3r/GUI/GUI_App.cpp:2259 src/slic3r/GUI/wxExtensions.cpp:708
msgid "Simple"
msgstr "Basit"

#: src/slic3r/GUI/GUI_App.cpp:2259
msgid "Simple View Mode"
msgstr "Basit görünüm modu"

#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:710
msgctxt "Mode"
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2261
msgid "Advanced View Mode"
msgstr "Gelişmiş Görünüm Modu"

#: src/slic3r/GUI/GUI_App.cpp:2262 src/slic3r/GUI/wxExtensions.cpp:711
msgid "Expert"
msgstr "Uzman"

#: src/slic3r/GUI/GUI_App.cpp:2262
msgid "Expert View Mode"
msgstr "Uzman Modu"

#: src/slic3r/GUI/GUI_App.cpp:2267
msgid "Mode"
msgstr "Mod"

#: src/slic3r/GUI/GUI_App.cpp:2267
#, c-format, boost-format
msgid "%s View Mode"
msgstr "%s Görüntüleme Modu"

#: src/slic3r/GUI/GUI_App.cpp:2270
msgid "&Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2273
msgid "Flash Printer &Firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2273
msgid "Upload a firmware image into an Arduino based printer"
msgstr "Arduino tabanlı bir yazıcıya yazılım yükle"

#: src/slic3r/GUI/GUI_App.cpp:2293
msgid "Taking a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2294
msgid ""
"Some presets are modified and the unsaved changes will not be captured by "
"the configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2295
msgid "Snapshot name"
msgstr "Anlık görüntü adı"

#: src/slic3r/GUI/GUI_App.cpp:2311
msgid "Loading a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2320
#, boost-format
msgid "Continue to activate a configuration snapshot %1%?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2334
msgid "Failed to activate configuration snapshot."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2353
msgid "Restart application"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2387
msgid "Language selection"
msgstr "Dil seçimi"

#: src/slic3r/GUI/GUI_App.cpp:2390
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""
"Dilin değiştirilmesi uygulamanın yeniden başlatılmasını tetikler.\n"
"Tabla içeriğini kaybedeceksiniz."

#: src/slic3r/GUI/GUI_App.cpp:2392 src/slic3r/GUI/Preferences.cpp:582
msgid "Do you want to proceed?"
msgstr "Devam etmek istiyor musunuz?"

#: src/slic3r/GUI/GUI_App.cpp:2419
msgid "&Configuration"
msgstr "&Ayarlar"

#: src/slic3r/GUI/GUI_App.cpp:2533 src/slic3r/GUI/GUI_App.cpp:2594
msgid "The preset modifications are successfully saved"
msgid_plural "The presets modifications are successfully saved"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_App.cpp:2597
msgid "For new project all modifications will be reseted"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2635
msgid "Loading a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2638
msgid "Project is loading"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2638
msgid "Opening new project while some presets are unsaved."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2657
msgid "The uploads are still ongoing"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2657
msgid "Stop them and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2661
msgid "Ongoing uploads"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2875
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr "SLA teknolojisi ile çok parçalı nesnelerin basılması mümkün değildir."

#: src/slic3r/GUI/GUI_App.cpp:2876 src/slic3r/GUI/Jobs/SLAImportJob.cpp:235
#: src/slic3r/GUI/Plater.cpp:2448
msgid "Please check your object list before preset changing."
msgstr ""
"Lütfen önceden ayarlanmış değişiklik yapmadan önce nesne listenizi kontrol "
"edin."

#: src/slic3r/GUI/GUI_App.cpp:2900
msgid "Configuration is editing from ConfigWizard"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:2925
msgid "Select a gcode file:"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3099 src/slic3r/GUI/GUI_App.cpp:3122
msgid "Open hyperlink in default browser?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3099 src/slic3r/GUI/GUI_App.cpp:3122
msgid "PrusaSlicer: Open hyperlink"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Preferences.cpp:382
msgid "Suppress to open hyperlink in browser"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3106 src/slic3r/GUI/Plater.cpp:1732
msgid "PrusaSlicer will remember your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3107
msgid "You will not be asked about it again on hyperlinks hovering."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3108 src/slic3r/GUI/Plater.cpp:1736
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to changes your choice."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:3110 src/slic3r/GUI/Plater.cpp:1738
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
msgid "PrusaSlicer: Don't ask me again"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:57 src/slic3r/GUI/GUI_Init.cpp:60
msgid "PrusaSlicer GUI initialization failed"
msgstr ""

#: src/slic3r/GUI/GUI_Init.cpp:60
#, boost-format
msgid "Fatal error, exception catched: %1%"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
#: src/libslic3r/PrintConfig.cpp:286 src/libslic3r/PrintConfig.cpp:403
#: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:455
#: src/libslic3r/PrintConfig.cpp:707 src/libslic3r/PrintConfig.cpp:774
#: src/libslic3r/PrintConfig.cpp:782 src/libslic3r/PrintConfig.cpp:1227
#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:1539
#: src/libslic3r/PrintConfig.cpp:1931 src/libslic3r/PrintConfig.cpp:1998
#: src/libslic3r/PrintConfig.cpp:2232 src/libslic3r/PrintConfig.cpp:2818
#: src/libslic3r/PrintConfig.cpp:2826 src/libslic3r/PrintConfig.cpp:2886
#: src/libslic3r/PrintConfig.cpp:2895 src/libslic3r/PrintConfig.cpp:3066
msgid "Layers and Perimeters"
msgstr "Katmanlar ve Duvarlar"

#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
#: src/slic3r/GUI/GUI_Preview.cpp:249 src/slic3r/GUI/Tab.cpp:1547
#: src/slic3r/GUI/Tab.cpp:1549 src/libslic3r/ExtrusionEntity.cpp:340
#: src/libslic3r/ExtrusionEntity.cpp:372 src/libslic3r/PrintConfig.cpp:669
#: src/libslic3r/PrintConfig.cpp:2063 src/libslic3r/PrintConfig.cpp:2072
#: src/libslic3r/PrintConfig.cpp:2081 src/libslic3r/PrintConfig.cpp:2091
#: src/libslic3r/PrintConfig.cpp:2100 src/libslic3r/PrintConfig.cpp:2522
#: src/libslic3r/PrintConfig.cpp:2528 src/libslic3r/PrintConfig.cpp:2536
#: src/libslic3r/PrintConfig.cpp:2549 src/libslic3r/PrintConfig.cpp:2559
#: src/libslic3r/PrintConfig.cpp:2567 src/libslic3r/PrintConfig.cpp:2585
#: src/libslic3r/PrintConfig.cpp:2602 src/libslic3r/PrintConfig.cpp:2623
#: src/libslic3r/PrintConfig.cpp:2636 src/libslic3r/PrintConfig.cpp:2653
#: src/libslic3r/PrintConfig.cpp:2671 src/libslic3r/PrintConfig.cpp:2686
#: src/libslic3r/PrintConfig.cpp:2696 src/libslic3r/PrintConfig.cpp:2705
#: src/libslic3r/PrintConfig.cpp:2716 src/libslic3r/PrintConfig.cpp:2730
#: src/libslic3r/PrintConfig.cpp:2746 src/libslic3r/PrintConfig.cpp:2754
#: src/libslic3r/PrintConfig.cpp:2755 src/libslic3r/PrintConfig.cpp:2764
#: src/libslic3r/PrintConfig.cpp:2778 src/libslic3r/PrintConfig.cpp:2786
#: src/libslic3r/PrintConfig.cpp:2800
msgid "Support material"
msgstr "Destek"

#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
#: src/libslic3r/PrintConfig.cpp:3022 src/libslic3r/PrintConfig.cpp:3030
msgid "Wipe options"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:65
msgid "Pad and Support"
msgstr "Ped ve Destek"

#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/GUI_Preview.cpp:245
#: src/slic3r/GUI/Tab.cpp:1513 src/libslic3r/ExtrusionEntity.cpp:336
#: src/libslic3r/ExtrusionEntity.cpp:364 src/libslic3r/PrintConfig.cpp:1555
#: src/libslic3r/PrintConfig.cpp:1561 src/libslic3r/PrintConfig.cpp:1575
#: src/libslic3r/PrintConfig.cpp:1585 src/libslic3r/PrintConfig.cpp:1593
#: src/libslic3r/PrintConfig.cpp:1595
msgid "Ironing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1278
#: src/libslic3r/PrintConfig.cpp:1279 src/libslic3r/PrintConfig.cpp:1294
#: src/libslic3r/PrintConfig.cpp:1304
msgid "Fuzzy Skin"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/GUI_Preview.cpp:220
#: src/slic3r/GUI/Tab.cpp:1581 src/libslic3r/PrintConfig.cpp:506
#: src/libslic3r/PrintConfig.cpp:762 src/libslic3r/PrintConfig.cpp:1321
#: src/libslic3r/PrintConfig.cpp:1512 src/libslic3r/PrintConfig.cpp:1594
#: src/libslic3r/PrintConfig.cpp:1988 src/libslic3r/PrintConfig.cpp:2320
#: src/libslic3r/PrintConfig.cpp:2373 src/libslic3r/PrintConfig.cpp:2871
msgid "Speed"
msgstr "Hız"

#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1620
#: src/slic3r/GUI/Tab.cpp:2303 src/libslic3r/PrintConfig.cpp:792
#: src/libslic3r/PrintConfig.cpp:1465 src/libslic3r/PrintConfig.cpp:1965
#: src/libslic3r/PrintConfig.cpp:2341 src/libslic3r/PrintConfig.cpp:2615
#: src/libslic3r/PrintConfig.cpp:2643
msgid "Extruders"
msgstr "Ekstrüder sayısı"

#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:750
#: src/libslic3r/PrintConfig.cpp:860 src/libslic3r/PrintConfig.cpp:1213
#: src/libslic3r/PrintConfig.cpp:1473 src/libslic3r/PrintConfig.cpp:1974
#: src/libslic3r/PrintConfig.cpp:2361 src/libslic3r/PrintConfig.cpp:2624
#: src/libslic3r/PrintConfig.cpp:2858
msgid "Extrusion Width"
msgstr "Ekstrüzyon genişliği"

#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1533
#: src/libslic3r/PrintConfig.cpp:516 src/libslic3r/PrintConfig.cpp:527
#: src/libslic3r/PrintConfig.cpp:543
msgid "Skirt and brim"
msgstr "Etek ve kenar"

#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1491
#: src/slic3r/GUI/Tab.cpp:1525 src/slic3r/GUI/Tab.cpp:1642
#: src/slic3r/GUI/Tab.cpp:1646 src/slic3r/GUI/Tab.cpp:2030
#: src/slic3r/GUI/Tab.cpp:2401 src/slic3r/GUI/Tab.cpp:4728
#: src/libslic3r/PrintConfig.cpp:259 src/libslic3r/PrintConfig.cpp:494
#: src/libslic3r/PrintConfig.cpp:1414 src/libslic3r/PrintConfig.cpp:1501
#: src/libslic3r/PrintConfig.cpp:1548 src/libslic3r/PrintConfig.cpp:2498
#: src/libslic3r/PrintConfig.cpp:2508 src/libslic3r/PrintConfig.cpp:3046
#: src/libslic3r/PrintConfig.cpp:3080 src/libslic3r/PrintConfig.cpp:3090
#: src/libslic3r/PrintConfig.cpp:3105 src/libslic3r/PrintConfig.cpp:3118
#: src/libslic3r/PrintConfig.cpp:3127 src/libslic3r/PrintConfig.cpp:3142
#: src/libslic3r/PrintConfig.cpp:3157 src/libslic3r/PrintConfig.cpp:3168
#: src/libslic3r/PrintConfig.cpp:3365
msgid "Advanced"
msgstr "Gelişmiş"

#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
#: src/slic3r/GUI/Tab.cpp:4662 src/slic3r/GUI/Tab.cpp:4663
#: src/libslic3r/PrintConfig.cpp:3559 src/libslic3r/PrintConfig.cpp:3566
#: src/libslic3r/PrintConfig.cpp:3575 src/libslic3r/PrintConfig.cpp:3584
#: src/libslic3r/PrintConfig.cpp:3594 src/libslic3r/PrintConfig.cpp:3604
#: src/libslic3r/PrintConfig.cpp:3641 src/libslic3r/PrintConfig.cpp:3648
#: src/libslic3r/PrintConfig.cpp:3659 src/libslic3r/PrintConfig.cpp:3669
#: src/libslic3r/PrintConfig.cpp:3678 src/libslic3r/PrintConfig.cpp:3691
#: src/libslic3r/PrintConfig.cpp:3701 src/libslic3r/PrintConfig.cpp:3710
#: src/libslic3r/PrintConfig.cpp:3720 src/libslic3r/PrintConfig.cpp:3731
#: src/libslic3r/PrintConfig.cpp:3739
msgid "Supports"
msgstr "Destekler"

#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:575
#: src/slic3r/GUI/Tab.cpp:4703 src/slic3r/GUI/Tab.cpp:4704
#: src/slic3r/GUI/Tab.cpp:4776 src/libslic3r/PrintConfig.cpp:3747
#: src/libslic3r/PrintConfig.cpp:3754 src/libslic3r/PrintConfig.cpp:3768
#: src/libslic3r/PrintConfig.cpp:3779 src/libslic3r/PrintConfig.cpp:3789
#: src/libslic3r/PrintConfig.cpp:3811 src/libslic3r/PrintConfig.cpp:3822
#: src/libslic3r/PrintConfig.cpp:3829 src/libslic3r/PrintConfig.cpp:3836
#: src/libslic3r/PrintConfig.cpp:3847 src/libslic3r/PrintConfig.cpp:3856
#: src/libslic3r/PrintConfig.cpp:3865
msgid "Pad"
msgstr "Altlık"

#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4721
#: src/slic3r/GUI/Tab.cpp:4722 src/libslic3r/SLA/Hollowing.cpp:73
#: src/libslic3r/SLA/Hollowing.cpp:85 src/libslic3r/SLA/Hollowing.cpp:105
#: src/libslic3r/SLA/Hollowing.cpp:114 src/libslic3r/PrintConfig.cpp:3875
#: src/libslic3r/PrintConfig.cpp:3882 src/libslic3r/PrintConfig.cpp:3892
#: src/libslic3r/PrintConfig.cpp:3901
msgid "Hollowing"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:160
msgid "Add part"
msgstr "Bölüm ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:161
msgid "Add negative volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:162
msgid "Add modifier"
msgstr "Niteleyici ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:163
msgid "Add support blocker"
msgstr "Destek engelleyici ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:164
msgid "Add support enforcer"
msgstr "Destek uygulayıcısı ekle"

#: src/slic3r/GUI/GUI_Factories.cpp:300
msgid "Select showing settings"
msgstr "Gösterme ayarlarını seç"

#: src/slic3r/GUI/GUI_Factories.cpp:407 src/slic3r/GUI/GUI_Factories.cpp:412
#: src/slic3r/GUI/GUI_Factories.cpp:556 src/slic3r/GUI/GUI_Factories.cpp:562
#, c-format, boost-format
msgid "Quick Add Settings (%s)"
msgstr "Hızlı Ekleme Ayarları ( %s )"

#: src/slic3r/GUI/GUI_Factories.cpp:444
msgid "Remove the selected object"
msgstr "Seçilen nesneyi kaldır"

#: src/slic3r/GUI/GUI_Factories.cpp:456
msgid "Load"
msgstr "Yükle"

#: src/slic3r/GUI/GUI_Factories.cpp:461 src/slic3r/GUI/GUI_Factories.cpp:501
#: src/slic3r/GUI/GUI_Factories.cpp:505
msgid "Box"
msgstr "Kutu"

#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Cylinder"
msgstr "Silindir"

#: src/slic3r/GUI/GUI_Factories.cpp:461
msgid "Slab"
msgstr "Levha"

#: src/slic3r/GUI/GUI_Factories.cpp:471
msgid "Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:488 src/slic3r/GUI/GUI_Factories.cpp:526
msgid "Height range Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:535
msgid "Add settings"
msgstr "Ekleme ayarları"

#: src/slic3r/GUI/GUI_Factories.cpp:626
msgid "Change type"
msgstr "Türünü değiştir"

#: src/slic3r/GUI/GUI_Factories.cpp:636 src/slic3r/GUI/GUI_Factories.cpp:648
msgid "Set as a Separated Object"
msgstr "Ayrılmış Nesne Olarak Ayarla"

#: src/slic3r/GUI/GUI_Factories.cpp:648
msgid "Set as a Separated Objects"
msgstr "Ayrılmış Nesneler Olarak Ayarla"

#: src/slic3r/GUI/GUI_Factories.cpp:658
msgid "Printable"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:686
msgid "Rename"
msgstr "Adını değiştirmek"

#: src/slic3r/GUI/GUI_Factories.cpp:696
msgid "Fix through the Netfabb"
msgstr "Netfabb ile düzelt"

#: src/slic3r/GUI/GUI_Factories.cpp:715
msgid "Export as STL"
msgstr "STL Olarak Dışa Aktar"

#: src/slic3r/GUI/GUI_Factories.cpp:726
msgid "Reload the selected volumes from disk"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3555
msgid "Replace with STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:733
msgid "Replace the selected volume with new STL"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:740
msgid "Set extruder for selected items"
msgstr "Seçilen ürünler için ekstrüder seti"

#: src/slic3r/GUI/GUI_Factories.cpp:778 src/slic3r/Utils/Repetier.cpp:126
#: src/slic3r/Utils/Repetier.cpp:209 src/libslic3r/PrintConfig.cpp:634
#: src/libslic3r/PrintConfig.cpp:2738
msgid "Default"
msgstr "Varsayılan"

#: src/slic3r/GUI/GUI_Factories.cpp:795
msgid "Scale to print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:795
msgid "Scale the selected object to fit the print volume"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5642
msgid "Convert from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5643
msgid "Revert conversion from imperial units"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5644
msgid "Convert from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5644
msgid "Revert conversion from meters"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:859 src/slic3r/GUI/GUI_ObjectList.cpp:2133
#: src/libslic3r/PrintConfig.cpp:4516
msgid "Merge"
msgstr "Birleştir"

#: src/slic3r/GUI/GUI_Factories.cpp:859
msgid "Merge objects to the one multipart object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:878
msgid "Along X axis"
msgstr "X ekseni boyunca"

#: src/slic3r/GUI/GUI_Factories.cpp:878
msgid "Mirror the selected object along the X axis"
msgstr "Seçilen nesneyi X ekseni boyunca yansıt"

#: src/slic3r/GUI/GUI_Factories.cpp:880
msgid "Along Y axis"
msgstr "Y ekseni boyunca"

#: src/slic3r/GUI/GUI_Factories.cpp:880
msgid "Mirror the selected object along the Y axis"
msgstr "Seçilen nesneyi Y ekseni boyunca aynala"

#: src/slic3r/GUI/GUI_Factories.cpp:882
msgid "Along Z axis"
msgstr "Z ekseni boyunca"

#: src/slic3r/GUI/GUI_Factories.cpp:882
msgid "Mirror the selected object along the Z axis"
msgstr "Seçilen nesneyi Z ekseni boyunca aynalayın"

#: src/slic3r/GUI/GUI_Factories.cpp:885
msgid "Mirror"
msgstr "Ayna"

#: src/slic3r/GUI/GUI_Factories.cpp:885
msgid "Mirror the selected object"
msgstr "Seçilen nesneyi yansıtma"

#: src/slic3r/GUI/GUI_Factories.cpp:901 src/slic3r/GUI/GUI_ObjectList.cpp:1696
msgid "Add Shape"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:937
msgid "To objects"
msgstr "Nesnelere"

#: src/slic3r/GUI/GUI_Factories.cpp:937 src/slic3r/GUI/GUI_Factories.cpp:954
msgid "Split the selected object into individual objects"
msgstr "Seçilen nesneyi ayrı nesnelere bölme"

#: src/slic3r/GUI/GUI_Factories.cpp:940
msgid "To parts"
msgstr "Parçalara"

#: src/slic3r/GUI/GUI_Factories.cpp:940 src/slic3r/GUI/GUI_Factories.cpp:975
msgid "Split the selected object into individual parts"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:944 src/slic3r/GUI/GUI_Factories.cpp:954
#: src/slic3r/GUI/GUI_Factories.cpp:975 src/libslic3r/PrintConfig.cpp:4545
msgid "Split"
msgstr "Bölünmüş"

#: src/slic3r/GUI/GUI_Factories.cpp:944
msgid "Split the selected object"
msgstr "Seçili nesneyi böl"

#: src/slic3r/GUI/GUI_Factories.cpp:1084
msgid "Add one more instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1087
msgid "Remove one instance of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1090
msgid "Set number of instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1090
msgid "Change the number of instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1094
msgid "Fill bed with instances"
msgstr ""

#: src/slic3r/GUI/GUI_Factories.cpp:1094
msgid "Fill the remaining area of bed with instances of the selected object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Start at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Stop at height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
msgid "Remove layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
msgid "Add layer range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:297
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:139
msgid "Name"
msgstr "İsim"

#: src/slic3r/GUI/GUI_ObjectList.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:480
msgid "Editing"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:400
msgid "No errors detected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:409
#, c-format, boost-format
msgid "Auto-repaired %1$d error"
msgid_plural "Auto-repaired %1$d errors"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:415
#, c-format, boost-format
msgid "%1$d degenerate facet"
msgid_plural "%1$d degenerate facets"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:417
#, c-format, boost-format
msgid "%1$d edge fixed"
msgid_plural "%1$d edges fixed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:419
#, c-format, boost-format
msgid "%1$d facet removed"
msgid_plural "%1$d facets removed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:421
#, c-format, boost-format
msgid "%1$d facet reversed"
msgid_plural "%1$d facets reversed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:423
#, c-format, boost-format
msgid "%1$d backward edge"
msgid_plural "%1$d backward edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:426 src/slic3r/GUI/GUI_ObjectList.cpp:429
#, c-format, boost-format
msgid "%1$d open edge"
msgid_plural "%1$d open edges"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:428
msgid "Remaining errors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:436
msgid "Right button click the icon to fix STL through Netfabb"
msgstr "STL'yi Netfabb ile düzeltmek için simgeye sağ tıklayın"

#: src/slic3r/GUI/GUI_ObjectList.cpp:482
msgid "Right button click the icon to change the object settings"
msgstr "Nesne ayarlarını değiştirmek için simgeye sağ tıklayın"

#: src/slic3r/GUI/GUI_ObjectList.cpp:484
msgid "Click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:488
msgid "Right button click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:490
msgid "Click the icon to change the object printable property"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:616
msgid "Change Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:631
msgid "Rename Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:631
msgid "Rename Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1242
#: src/slic3r/GUI/GUI_ObjectList.cpp:3997
msgid "Instances to Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1248
msgid "Volumes in Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1248
msgid "Object reordered"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1298
msgid "Add Settings for Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1299
msgid "Add Settings for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1300
msgid "Add Settings for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
msgid "Add Settings Bundle for Height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1340
msgid "Add Settings Bundle for Sub-object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1341
msgid "Add Settings Bundle for Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1413
msgid "Load Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1413
msgid "Load Modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1509 src/slic3r/GUI/Plater.cpp:2380
msgid "Loading"
msgstr "Yükleniyor"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2406
msgid "Loading file"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1548
msgid "Error!"
msgstr "Hata!"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1638
msgid "Add Generic Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1663
msgid "Generic"
msgstr "Genel"

#: src/slic3r/GUI/GUI_ObjectList.cpp:1727
msgid "Add Shape from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1727
msgid "Add Shapes from Gallery"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1830
msgid "Remove paint-on supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1837
msgid "Remove paint-on seam"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1844
msgid "Remove Multi Material painting"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1850
msgid "Shift objects to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1856
msgid "Remove variable layer height"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1877
msgid "Delete Settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1901
msgid "Delete All Instances from Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1917
msgid "Delete Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1949
msgid "From Object List You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1953
msgid "Delete Subobject"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1976
msgid "Last instance of an object cannot be deleted."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1980
msgid "Delete Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2004
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr "Seçilen nesne bölünemedi çünkü yalnızca bir parça içeriyordu."

#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
msgid "Split to Parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2140
msgid "Merged"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2228
msgid "Merge all parts to the one single object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2260
msgid "Add Layers"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2429
msgid "Group manipulation"
msgstr "Grup manipülasyonu"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2444
msgid "Object manipulation"
msgstr "Nesne yönetimi"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2477
msgid "Object Settings to modify"
msgstr "Değiştirilecek Nesne Ayarları"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2481
msgid "Part Settings to modify"
msgstr "Değiştirilecek Parça Ayarları"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2486
msgid "Layer range Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2492
msgid "Part manipulation"
msgstr "Bölüm manipülasyon"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2498
msgid "Instance manipulation"
msgstr "Kopya yönetimi"

#: src/slic3r/GUI/GUI_ObjectList.cpp:2505
msgid "Height ranges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2505
msgid "Settings for height range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2741
msgid "Delete Selected Item"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2934
msgid "Delete Selected"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3010
#: src/slic3r/GUI/GUI_ObjectList.cpp:3038
#: src/slic3r/GUI/GUI_ObjectList.cpp:3058
msgid "Add Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3104
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"The next layer range is too thin to be split to two\n"
"without violating the minimum layer height."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3108
msgid ""
"Cannot insert a new layer range between the current and the next layer "
"range.\n"
"The gap between the current layer range and the next layer range\n"
"is thinner than the minimum layer height allowed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3113
msgid ""
"Cannot insert a new layer range after the current layer range.\n"
"Current layer range overlaps with the next layer range."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3172
msgid "Edit Height Range"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3491
msgid "Selection-Remove from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3503
msgid "Selection-Add from list"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3640
msgid "Object or Instance"
msgstr "Nesne veya Örnek"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3641
#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Part"
msgstr "Bölüm"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3641
msgid "Layer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3643
msgid "Unsupported selection"
msgstr "Desteklenmeyen seçim"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3644
#, c-format, boost-format
msgid "You started your selection with %s Item."
msgstr "Seçiminize %s öğe ile başladınız."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3645
#, c-format, boost-format
msgid "In this mode you can select only other %s Items%s"
msgstr "Bu modda sadece diğer %s maddeleri seçebilirsiniz. %s"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3648
msgid "of a current Object"
msgstr "geçerli bir Nesnenin"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3653
#: src/slic3r/GUI/GUI_ObjectList.cpp:3728 src/slic3r/GUI/Plater.cpp:181
msgid "Info"
msgstr "Bilgi"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3775
msgid "You can't change a type of the last solid part of the object."
msgstr "Nesnenin son katı kısmının türünü değiştiremezsiniz."

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Negative Volume"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Modifier"
msgstr "Niteleyici"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Support Blocker"
msgstr "Destek Engelleyici"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3780
msgid "Support Enforcer"
msgstr "Destek Uygulayıcı"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3781
msgid "Select type of part"
msgstr "Parça türünü seçin"

#: src/slic3r/GUI/GUI_ObjectList.cpp:3786
msgid "Change Part Type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4019
msgid "Enter new name"
msgstr "Yeni isim girin"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4019
msgid "Renaming"
msgstr "Yeniden adlandırma"

#: src/slic3r/GUI/GUI_ObjectList.cpp:4082
msgid "Repairing model"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4111
msgid "Fix through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4114
msgid "Fixing through NetFabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4144
msgid "The following model was repaired successfully"
msgid_plural "The following models were repaired successfully"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4150
msgid "Folowing model repair failed"
msgid_plural "Folowing models repair failed"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4155
msgid "Repairing was canceled"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4267
msgid "Change Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4407
msgid "Set Printable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4407
msgid "Set Unprintable group"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4409
msgid "Set Printable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4409
msgid "Set Unprintable"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
msgid "Set Printable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
msgid "Set Unprintable Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:55
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84
msgid "World coordinates"
msgstr "Dünya koordinatları"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:56
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:85
msgid "Local coordinates"
msgstr "Yerel koordinatlar"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60
msgid "Select coordinate space, in which the transformation will be performed."
msgstr "Dönüşümün gerçekleştirileceği koordinat alanını seçin."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:141 src/libslic3r/GCode.cpp:540
msgid "Object name"
msgstr "Nesne adı"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:521
msgid "Position"
msgstr "Pozisyon"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:522
#: src/slic3r/GUI/Mouse3DController.cpp:478
#: src/slic3r/GUI/Mouse3DController.cpp:499
msgid "Rotation"
msgstr "Rotasyon"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:250
#, c-format, boost-format
msgid "Toggle %c axis mirroring"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
msgid "Set Mirror"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:336
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:348
msgid "Drop to bed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
msgid "Reset rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
msgid "Reset Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:398
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:400
msgid "Reset scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:414
msgid "Inches"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:523
msgid "Scale factors"
msgstr "Ölçek"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:577
msgid "Translate"
msgstr "Çeviri"

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
msgid ""
"You cannot use non-uniform scaling mode for multiple objects/parts selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:820
msgid "Set Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:852
msgid "Set Orientation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:931
msgid "Set Scale"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:980
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""
"Hali hazırda yönetilen nesne eğiktir (dönme açıları 90 °'nin katları "
"değildir).\n"
"Eğik nesnelerin düzgün olmayan bir şekilde ölçeklendirilmesi sadece "
"koordinat sisteminde mümkündür, çünkü rotasyon nesne koordinatlarına gömülü "
"değildir."

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:983
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""
"Bu işlem geri alınamaz.\n"
"Devam etmek ister misiniz?"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:63
msgid "Additional Settings"
msgstr "Ek ayarlar"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:99
msgid "Remove parameter"
msgstr "Parametre kaldır"

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:105
#, c-format, boost-format
msgid "Delete Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
#, c-format, boost-format
msgid "Change Option %s"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:211
msgid "View"
msgstr "Görünüm"

#: src/slic3r/GUI/GUI_Preview.cpp:218 src/libslic3r/PrintConfig.cpp:804
msgid "Height"
msgstr "Yükseklik"

#: src/slic3r/GUI/GUI_Preview.cpp:219 src/libslic3r/PrintConfig.cpp:3000
msgid "Width"
msgstr "Genişlik"

#: src/slic3r/GUI/GUI_Preview.cpp:221 src/slic3r/GUI/Tab.cpp:2015
msgid "Fan speed"
msgstr "Fan hızı"

#: src/slic3r/GUI/GUI_Preview.cpp:222 src/slic3r/GUI/Tab.cpp:1990
msgid "Temperature"
msgstr "Sıcaklık"

#: src/slic3r/GUI/GUI_Preview.cpp:223
msgid "Volumetric flow rate"
msgstr "Hacimsel akış hızı"

#: src/slic3r/GUI/GUI_Preview.cpp:228
msgid "Show"
msgstr "Göster"

#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/GUI_Preview.cpp:254
msgid "Feature types"
msgstr "Özellik türleri"

#: src/slic3r/GUI/GUI_Preview.cpp:239 src/libslic3r/ExtrusionEntity.cpp:330
#: src/libslic3r/ExtrusionEntity.cpp:352
msgid "Perimeter"
msgstr "Duvar"

#: src/slic3r/GUI/GUI_Preview.cpp:240 src/libslic3r/ExtrusionEntity.cpp:331
#: src/libslic3r/ExtrusionEntity.cpp:354
msgid "External perimeter"
msgstr "Dış duvar"

#: src/slic3r/GUI/GUI_Preview.cpp:241 src/libslic3r/ExtrusionEntity.cpp:332
#: src/libslic3r/ExtrusionEntity.cpp:356
msgid "Overhang perimeter"
msgstr "Çıkıntı duvar"

#: src/slic3r/GUI/GUI_Preview.cpp:242 src/libslic3r/ExtrusionEntity.cpp:333
#: src/libslic3r/ExtrusionEntity.cpp:358
msgid "Internal infill"
msgstr "İç dolgu"

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/ExtrusionEntity.cpp:334
#: src/libslic3r/ExtrusionEntity.cpp:360 src/libslic3r/PrintConfig.cpp:2360
#: src/libslic3r/PrintConfig.cpp:2372
msgid "Solid infill"
msgstr "Katı dolgu"

#: src/slic3r/GUI/GUI_Preview.cpp:244 src/libslic3r/ExtrusionEntity.cpp:335
#: src/libslic3r/ExtrusionEntity.cpp:362 src/libslic3r/PrintConfig.cpp:2857
#: src/libslic3r/PrintConfig.cpp:2870
msgid "Top solid infill"
msgstr "Üst katı dolgu"

#: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/ExtrusionEntity.cpp:337
#: src/libslic3r/ExtrusionEntity.cpp:366
msgid "Bridge infill"
msgstr "Köprü dolgusu"

#: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/ExtrusionEntity.cpp:338
#: src/libslic3r/ExtrusionEntity.cpp:368 src/libslic3r/PrintConfig.cpp:1320
msgid "Gap fill"
msgstr "Boşluk doldurma"

#: src/slic3r/GUI/GUI_Preview.cpp:248 src/libslic3r/ExtrusionEntity.cpp:339
#: src/libslic3r/ExtrusionEntity.cpp:370
msgid "Skirt/Brim"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:250 src/libslic3r/ExtrusionEntity.cpp:341
#: src/libslic3r/ExtrusionEntity.cpp:374 src/libslic3r/PrintConfig.cpp:2704
msgid "Support material interface"
msgstr "Destek ara bağlantısı"

#: src/slic3r/GUI/GUI_Preview.cpp:251 src/slic3r/GUI/Tab.cpp:1631
#: src/libslic3r/ExtrusionEntity.cpp:342 src/libslic3r/ExtrusionEntity.cpp:376
msgid "Wipe tower"
msgstr "Temizleme kulesi"

#: src/slic3r/GUI/GUI_Preview.cpp:728
msgid "NOTE:"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:729
#, boost-format
msgid "Sliced object \"%1%\" looks like a logo or a sign"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:730
msgid "Apply color change automatically"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1058
msgid "Shells"
msgstr "Duvarlar"

#: src/slic3r/GUI/GUI_Preview.cpp:1059
msgid "Tool marker"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:1060
msgid "Legend/Estimated printing time"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:771
#: src/slic3r/GUI/HintNotification.cpp:797
#: src/slic3r/GUI/NotificationManager.cpp:374
#: src/slic3r/GUI/NotificationManager.cpp:391
msgid "More"
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:912
msgid "Open Preferences."
msgstr ""

#: src/slic3r/GUI/HintNotification.cpp:1004
msgid "Open Documentation in web browser."
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:527
msgid "Edit"
msgstr "Düzenle"

#: src/slic3r/GUI/ImGuiWrapper.cpp:960 src/slic3r/GUI/Search.cpp:470
msgid "Use for search"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:961 src/slic3r/GUI/Search.cpp:463
msgid "Category"
msgstr ""

#: src/slic3r/GUI/ImGuiWrapper.cpp:963 src/slic3r/GUI/Search.cpp:465
msgid "Search in English"
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:171
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "Model nesneleri düzenlenemedi! Bazı geometriler geçersiz olabilir."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:180
msgid "Arranging"
msgstr "Düzenleme"

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:204
msgid "Arranging canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:205
msgid "Arranging done."
msgstr "Düzenleme yapıldı."

#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:250
#, c-format, boost-format
msgid ""
"Arrangement ignored the following objects which can't fit into a single "
"bed:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:123
msgid "Filling bed"
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:134
msgid "Bed filling canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/FillBedJob.cpp:135
msgid "Bed filling done."
msgstr ""

#: src/slic3r/GUI/Jobs/Job.cpp:111
msgid "ERROR: not enough resources to execute a new job."
msgstr ""

#: src/slic3r/GUI/Jobs/PlaterJob.cpp:13
msgid "An unexpected error occured"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:21
msgid "Best surface quality"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:23
msgid "Optimize object rotation for best surface quality."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24
msgid "Reduced overhang slopes"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:26
msgid ""
"Optimize object rotation to have minimum amount of overhangs needing support "
"structures.\n"
"Note that this method will try to find the best surface of the object for "
"touching the print bed if no elevation is set."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:30
msgid "Lowest Z height"
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:32
msgid "Rotate the model to have the lowest z height for faster print time."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:59
msgid "Searching for optimal orientation"
msgstr "Optimum yönlendirme aranıyor"

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:77
msgid "Orientation search canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:78
msgid "Orientation found."
msgstr "Oryantasyon bulundu."

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:36
msgid "Choose SLA archive:"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:40
msgid "Import file"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
msgid "Import model and profile"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
msgid "Import profile only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
msgid "Import model only"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
msgid "Accurate"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
msgid "Balanced"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:62
msgid "Quick"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:140
msgid "Importing SLA archive"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:158
msgid ""
"The SLA archive doesn't contain any presets. Please activate some SLA "
"printer preset first before importing that SLA archive."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:164
msgid "Importing canceled."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:165
msgid "Importing done."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:187
msgid "The file does not exist."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:221
msgid ""
"The imported SLA archive did not contain any presets. The current SLA "
"presets were used as fallback."
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:234 src/slic3r/GUI/Plater.cpp:2447
msgid "You cannot load SLA project with a multi-part object on the bed"
msgstr ""

#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:236 src/slic3r/GUI/Plater.cpp:2449
msgid "Attention!"
msgstr "Dikkat!"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1103
msgid "Keyboard Shortcuts"
msgstr "Klavye kısayolları"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:77
msgid "New project, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:78
msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:79
msgid "Save project (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:80
msgid "Save project as (3mf)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:81
msgid "(Re)slice"
msgstr "(Tekrar) dilimle"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:83
msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:84
msgid "Import Config from ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:85
msgid "Load Config from ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:913
#: src/slic3r/GUI/Plater.cpp:6530 src/libslic3r/PrintConfig.cpp:4416
msgid "Export G-code"
msgstr "G-code Dışa Aktar"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6531
msgid "Send G-code"
msgstr "G kodunu gönder"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
msgid "Export config"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:90 src/slic3r/GUI/Plater.cpp:896
msgid "Export to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:91
msgid "Eject SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
msgid "Select all objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
msgid "Deselect all"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:95
msgid "Delete selected"
msgstr "Seçileni sil"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:99
msgid "Copy to clipboard"
msgstr "Panoya kopyala"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Paste from clipboard"
msgstr "Panodan yapıştır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
msgid "Reload plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
msgid "Select Plater Tab"
msgstr "Tabla Sekmesini Seç"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Select Print Settings Tab"
msgstr "Yazdırma Ayarları Sekmesi"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
msgid "Select Filament Settings Tab"
msgstr "Filament Ayarları Sekmesi"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Select Printer Settings Tab"
msgstr "Yazıcı Ayarları Sekmesi"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Switch to 3D"
msgstr "3B görünüme geç"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Switch to Preview"
msgstr "Ön izleme"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
#: src/slic3r/GUI/PrintHostDialogs.cpp:217
msgid "Print host upload queue"
msgstr "Ana bilgisayar yükleme kuyruğunu yazdır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/MainFrame.cpp:75
msgid "Open new instance"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Camera view"
msgstr "Kamera görünümü"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Show/Hide object/instance labels"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Preferences.cpp:46
msgid "Preferences"
msgstr "Tercihler"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Show keyboard shortcuts list"
msgstr "Klavye kısayolları listesini göster"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
msgid "Commands"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Add Instance of the selected object"
msgstr "Seçilen nesnenin örneğini ekle"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Remove Instance of the selected object"
msgstr "Seçilen nesnenin örneğini kaldır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid ""
"Press to select multiple objects\n"
"or move multiple objects with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Press to activate selection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Press to activate deselection rectangle"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
msgid "Arrow Up"
msgstr "Yukarı ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Move selection 10 mm in positive Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Arrow Down"
msgstr "Aşağı ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Move selection 10 mm in negative Y direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Arrow Left"
msgstr "Sol ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Move selection 10 mm in negative X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Arrow Right"
msgstr "Sağ Ok"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Move selection 10 mm in positive X direction"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Any arrow"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Movement step set to 1 mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Movement in camera space"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Page Up"
msgstr "Page Up"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Rotate selection 45 degrees CCW"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Page Down"
msgstr "Page Down"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Rotate selection 45 degrees CW"
msgstr ""

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Gizmo move"
msgstr "Gizmo hareketi"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid "Gizmo scale"
msgstr "Gizmo ölçeği"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Gizmo rotate"
msgstr "Gizmo döndürme"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Gizmo cut"
msgstr "Gizmo kesim"

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Gizmo Place face on bed"
msgstr "Gizmo yüzeyini tablaya yerleştir"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Gizmo SLA hollow"
msgstr ""

# What is Gizmo? Didn't find suitable word in Turkish.
#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Gizmo SLA support points"
msgstr "Gizmo SLA destek noktaları"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Gizmo FDM paint-on supports"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
msgid "Gizmo FDM paint-on seam"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Gizmo Multi Material painting"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
msgid "Unselect gizmo or clear selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
msgid "Change camera type (perspective, orthographic)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
msgid "Zoom to Bed"
msgstr "Tablaya Yakınlaştır"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
msgid ""
"Zoom to selected object\n"
"or all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
msgid "Zoom in"
msgstr "Yaklaş"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
msgid "Zoom out"
msgstr "Uzaklaş"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
msgid "Switch between Editor/Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
msgid "Collapse/Expand the sidebar"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
msgid "Show/Hide 3Dconnexion devices settings dialog"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
msgid "Minimize application"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:181 src/slic3r/GUI/MainFrame.cpp:284
#: src/slic3r/GUI/MainFrame.cpp:333 src/slic3r/GUI/MainFrame.cpp:445
#: src/slic3r/GUI/MainFrame.cpp:448 src/slic3r/GUI/MainFrame.cpp:470
#: src/slic3r/GUI/MainFrame.cpp:473
msgid "Plater"
msgstr "Tabla"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Gizmo move: Press to snap by 1mm"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
msgid "Gizmo scale: Press to snap by 5%"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Gizmo scale: Scale selection to fit print volume"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:188
msgid "Gizmo scale: Press to activate one direction scaling"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
msgid "Gizmo scale: Press to scale selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
msgid "Gizmo rotate: Press to rotate selected objects around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid "Gizmos"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
msgid ""
"The following shortcuts are applicable when the specified gizmo is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
msgid "Set selected items as Printable/Unprintable"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
msgid "Set default extruder for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
msgid "Set extruder number for the selected items"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
msgid "Objects List"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:205 src/slic3r/GUI/MainFrame.cpp:1521
msgid "Open a G-code file"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:207 src/slic3r/GUI/MainFrame.cpp:1355
#: src/slic3r/GUI/MainFrame.cpp:1359 src/slic3r/GUI/MainFrame.cpp:1526
#: src/slic3r/GUI/MainFrame.cpp:1530
msgid "Reload the plater from disk"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
msgid "Vertical slider - Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
msgid "Vertical slider - Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
msgid "Horizontal slider - Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
msgid "Horizontal slider - Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
msgid "On/Off one layer mode of the vertical slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
msgid "Show/Hide Legend and Estimated printing time"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
msgid "Show/Hide G-code window"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4467
#: src/slic3r/GUI/Tab.cpp:2831
msgid "Preview"
msgstr "Ön izleme"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
msgid "Move active thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:234
msgid "Move active thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
msgid "Set upper thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:236
msgid "Set lower thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:237
msgid "Add color change marker for current layer"
msgstr "Mevcut katman için renk değiştirme işaretçisini ekle"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:238
msgid "Delete color change marker for current layer"
msgstr "Geçerli katman için renk değişikliği işaretçisini sil"

#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
#: src/slic3r/GUI/KBShortcutsDialog.cpp:251
msgid ""
"Press to speed up 5 times while moving thumb\n"
"with arrow keys or mouse wheel"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Vertical Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid ""
"The following shortcuts are applicable in G-code preview when the vertical "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Move active thumb Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Move active thumb Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:248
msgid "Set left thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
msgid "Set right thumb as active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid "Horizontal Slider"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
msgid ""
"The following shortcuts are applicable in G-code preview when the horizontal "
"slider is active"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:278
msgid "Keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:75 src/slic3r/GUI/MainFrame.cpp:89
#: src/slic3r/GUI/MainFrame.cpp:1416
msgid "Open a new PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:91
msgid "G-code preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:1304
msgid "Open G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:89 src/slic3r/GUI/MainFrame.cpp:1537
msgid "Open PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:91
msgid "Open new G-code viewer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:225
msgid "Closing PrusaSlicer. Current project is modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:232
msgid "PrusaSlicer is closing"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:232
msgid "Closing PrusaSlicer while some presets are modified."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
msgid "Print Settings"
msgstr "Baskı Ayarları"

#: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
#: src/slic3r/GUI/MainFrame.cpp:2099 src/slic3r/GUI/MainFrame.cpp:2100
#: src/slic3r/GUI/Tab.hpp:535
msgid "Material Settings"
msgstr "Malzeme Ayarları"

#: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
#: src/slic3r/GUI/MainFrame.cpp:2099 src/slic3r/GUI/MainFrame.cpp:2100
#: src/slic3r/GUI/Tab.hpp:461
msgid "Filament Settings"
msgstr "Filament Ayarları"

#: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
#: src/slic3r/GUI/Tab.hpp:503
msgid "Printer Settings"
msgstr "Yazıcı ayarları"

#: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1719
#: src/slic3r/GUI/Plater.cpp:2839
msgid "Untitled"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:655
msgid "based on Slic3r"
msgstr "slic3r uygulamasına dayalı"

#: src/slic3r/GUI/MainFrame.cpp:1073
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D ve Sürücüler"

#: src/slic3r/GUI/MainFrame.cpp:1073
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "Prusa3D sürücüleri indirme sayfasını tarayıcınızda açar"

#: src/slic3r/GUI/MainFrame.cpp:1075
msgid "Software &Releases"
msgstr "Yazılım ve Bültenler"

#: src/slic3r/GUI/MainFrame.cpp:1075
msgid "Open the software releases page in your browser"
msgstr "Tarayıcınızda yazılım sürümleri sayfasını açar"

#: src/slic3r/GUI/MainFrame.cpp:1081
#, c-format, boost-format
msgid "%s &Website"
msgstr "%s &Web Sitesi"

#: src/slic3r/GUI/MainFrame.cpp:1082
#, c-format, boost-format
msgid "Open the %s website in your browser"
msgstr "Tarayıcınızda %s web sitesini açar"

#: src/slic3r/GUI/MainFrame.cpp:1088
msgid "System &Info"
msgstr "Sistem bilgisi"

#: src/slic3r/GUI/MainFrame.cpp:1088
msgid "Show system information"
msgstr "Sistem bilgisini göster"

#: src/slic3r/GUI/MainFrame.cpp:1090
msgid "Show &Configuration Folder"
msgstr "&Yapılandırma Klasörünü Göster"

#: src/slic3r/GUI/MainFrame.cpp:1090
msgid "Show user configuration folder (datadir)"
msgstr "Kullanıcı konfigürasyon klasörünü göster"

#: src/slic3r/GUI/MainFrame.cpp:1092
msgid "Report an I&ssue"
msgstr "Bir Görüş Bildirin"

#: src/slic3r/GUI/MainFrame.cpp:1092
#, c-format, boost-format
msgid "Report an issue on %s"
msgstr "%s ile ilgili görüş bildirin"

#: src/slic3r/GUI/MainFrame.cpp:1095 src/slic3r/GUI/MainFrame.cpp:1098
#, c-format, boost-format
msgid "&About %s"
msgstr "%s &Hakkında"

#: src/slic3r/GUI/MainFrame.cpp:1095 src/slic3r/GUI/MainFrame.cpp:1098
msgid "Show about dialog"
msgstr "Hakkında"

#: src/slic3r/GUI/MainFrame.cpp:1100
msgid "Show Tip of the Day"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1100
msgid ""
"Opens Tip of the day notification in bottom right corner or shows another "
"tip if already opened."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1103
msgid "Show the list of the keyboard shortcuts"
msgstr "Klavye kısayollarının listesini göster"

#: src/slic3r/GUI/MainFrame.cpp:1117
msgid "Iso"
msgstr "Perspektif"

#: src/slic3r/GUI/MainFrame.cpp:1117
msgid "Iso View"
msgstr "Perspektif görünümü"

#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1121 src/libslic3r/PrintConfig.cpp:2885
#: src/libslic3r/PrintConfig.cpp:2894
msgid "Top"
msgstr "Üst"

#: src/slic3r/GUI/MainFrame.cpp:1121
msgid "Top View"
msgstr "Üst Görünüm"

#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1124 src/libslic3r/PrintConfig.cpp:445
#: src/libslic3r/PrintConfig.cpp:454
msgid "Bottom"
msgstr "Alt"

#: src/slic3r/GUI/MainFrame.cpp:1124
msgid "Bottom View"
msgstr "Alt Görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1126
msgid "Front"
msgstr "Ön"

#: src/slic3r/GUI/MainFrame.cpp:1126
msgid "Front View"
msgstr "Ön görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1128 src/libslic3r/PrintConfig.cpp:2242
msgid "Rear"
msgstr "Arka"

#: src/slic3r/GUI/MainFrame.cpp:1128
msgid "Rear View"
msgstr "Arka görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1130
msgid "Left"
msgstr "Sol"

#: src/slic3r/GUI/MainFrame.cpp:1130
msgid "Left View"
msgstr "Sol görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1132
msgid "Right"
msgstr "Sağ"

#: src/slic3r/GUI/MainFrame.cpp:1132
msgid "Right View"
msgstr "Sağ görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1145
msgid "&New Project"
msgstr "&Yeni Proje"

#: src/slic3r/GUI/MainFrame.cpp:1145
msgid "Start a new project"
msgstr "Yeni bir proje başlat"

#: src/slic3r/GUI/MainFrame.cpp:1148
msgid "&Open Project"
msgstr "& Proje Aç"

#: src/slic3r/GUI/MainFrame.cpp:1148
msgid "Open a project file"
msgstr "Bir proje dosyası açın"

#: src/slic3r/GUI/MainFrame.cpp:1153
msgid "Recent projects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1165
msgid ""
"The selected project is no longer available.\n"
"Do you want to remove it from the recent projects list?"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1190
msgid "&Save Project"
msgstr "& Projeyi Kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1190
msgid "Save current project file"
msgstr "Mevcut proje dosyasını kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1194 src/slic3r/GUI/MainFrame.cpp:1196
msgid "Save Project &as"
msgstr "Projeyi farklı kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1194 src/slic3r/GUI/MainFrame.cpp:1196
msgid "Save current project file as"
msgstr "Mevcut proje dosyasını farklı kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1204
msgid "Import STL/OBJ/AM&F/3MF"
msgstr "STL/OBJ/AM&F/3MF"

#: src/slic3r/GUI/MainFrame.cpp:1204
msgid "Load a model"
msgstr "Bir model yükle"

#: src/slic3r/GUI/MainFrame.cpp:1208
msgid "Import STL (Imperial Units)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1208
msgid "Load an model saved with imperial units"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1212
msgid "Import SL1 / SL1S Archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1212
msgid "Load an SL1 / Sl1S archive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1217
msgid "Import &Config"
msgstr "&Ayarları İçe Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1217
msgid "Load exported configuration file"
msgstr "Dışa aktarılan yapılandırma dosyasını yükle"

#: src/slic3r/GUI/MainFrame.cpp:1220
msgid "Import Config from &Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1220
msgid "Load configuration from project file"
msgstr "Proje dosyasından yapılandırmayı yükle"

#: src/slic3r/GUI/MainFrame.cpp:1224
msgid "Import Config &Bundle"
msgstr "Ha&zır Ayarları İçe Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1224
msgid "Load presets from a bundle"
msgstr "Paketten hazır ayarları yükleme"

#: src/slic3r/GUI/MainFrame.cpp:1227
msgid "&Import"
msgstr "&İçe Aktarma"

#: src/slic3r/GUI/MainFrame.cpp:1230 src/slic3r/GUI/MainFrame.cpp:1582
msgid "Export &G-code"
msgstr "&G-code Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1230
msgid "Export current plate as G-code"
msgstr "Geçerli tablayı G-code olarak dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1234 src/slic3r/GUI/MainFrame.cpp:1583
msgid "S&end G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1234
msgid "Send to print current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1238
msgid "Export G-code to SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1238
msgid "Export current plate as G-code to SD card / Flash drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1242
msgid "Export Plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1242
msgid "Export current plate as STL"
msgstr "Geçerli tablayı STL olarak dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1245
msgid "Export Plate as STL &Including Supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1245
msgid "Export current plate as STL including supports"
msgstr "Geçerli tablayı destekler ile STL olarak dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1253 src/slic3r/GUI/MainFrame.cpp:1534
msgid "Export &Toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1253 src/slic3r/GUI/MainFrame.cpp:1534
msgid "Export toolpaths as OBJ"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1257
msgid "Export &Config"
msgstr "Ayarları &Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1257
msgid "Export current configuration to file"
msgstr "Geçerli yapılandırmayı dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1260
msgid "Export Config &Bundle"
msgstr "&Hazır Ayarları Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1260
msgid "Export all presets to file"
msgstr "Tüm hazır ayarları dışa aktar"

#: src/slic3r/GUI/MainFrame.cpp:1263
msgid "Export Config Bundle With Physical Printers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1263
msgid "Export all presets including physical printers to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1266
msgid "&Export"
msgstr "&Dışa Aktar"

#: src/slic3r/GUI/MainFrame.cpp:1268
msgid "Ejec&t SD Card / Flash Drive"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1268
msgid "Eject SD card / Flash drive after the G-code was exported to it."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1276
msgid "Quick Slice"
msgstr "Hızlı Dilim"

#: src/slic3r/GUI/MainFrame.cpp:1276
msgid "Slice a file into a G-code"
msgstr "Bir dosyayı G koduna dilimleme"

#: src/slic3r/GUI/MainFrame.cpp:1282
msgid "Quick Slice and Save As"
msgstr "Hızlı Dilim ve Farklı Kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1282
msgid "Slice a file into a G-code, save as"
msgstr "Bir dosyayı dilimle ve farklı kaydet"

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Repeat Last Quick Slice"
msgstr "Son Hızlı Dilimi Tekrarla"

#: src/slic3r/GUI/MainFrame.cpp:1288
msgid "Repeat last quick slice"
msgstr "Son hızlı dilimi tekrarla"

#: src/slic3r/GUI/MainFrame.cpp:1296
msgid "(Re)Slice No&w"
msgstr "(Tekrar)Dilimle"

#: src/slic3r/GUI/MainFrame.cpp:1296
msgid "Start new slicing process"
msgstr "Yeni dilimleme işlemine başla"

#: src/slic3r/GUI/MainFrame.cpp:1300
msgid "&Repair STL file"
msgstr "& STL dosyasını onar"

#: src/slic3r/GUI/MainFrame.cpp:1300
msgid "Automatically repair an STL file"
msgstr "Bir STL dosyasını otomatik olarak onar"

#: src/slic3r/GUI/MainFrame.cpp:1304
msgid "&G-code Preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1307 src/slic3r/GUI/MainFrame.cpp:1541
msgid "&Quit"
msgstr "&Çıkış"

#: src/slic3r/GUI/MainFrame.cpp:1307 src/slic3r/GUI/MainFrame.cpp:1541
#, c-format, boost-format
msgid "Quit %s"
msgstr "%s uygulamasını kapat"

#: src/slic3r/GUI/MainFrame.cpp:1322
msgid "&Select All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1323
msgid "Selects all objects"
msgstr "Tüm nesneleri seçer"

#: src/slic3r/GUI/MainFrame.cpp:1325
msgid "D&eselect All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1326
msgid "Deselects all objects"
msgstr "Tüm nesnelerin seçimini kaldırır"

#: src/slic3r/GUI/MainFrame.cpp:1329
msgid "&Delete Selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1330
msgid "Deletes the current selection"
msgstr "Mevcut seçimi siler"

#: src/slic3r/GUI/MainFrame.cpp:1332
msgid "Delete &All"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1333
msgid "Deletes all objects"
msgstr "Tüm nesneleri sil"

#: src/slic3r/GUI/MainFrame.cpp:1337
msgid "&Undo"
msgstr "&Geri Al"

#: src/slic3r/GUI/MainFrame.cpp:1340
msgid "&Redo"
msgstr "&Yinele"

#: src/slic3r/GUI/MainFrame.cpp:1345
msgid "&Copy"
msgstr "&Kopyala"

#: src/slic3r/GUI/MainFrame.cpp:1346
msgid "Copy selection to clipboard"
msgstr "Seçimi panoya kopyala"

#: src/slic3r/GUI/MainFrame.cpp:1348
msgid "&Paste"
msgstr "&Yapıştır"

#: src/slic3r/GUI/MainFrame.cpp:1349
msgid "Paste clipboard"
msgstr "Panodan yapıştır"

#: src/slic3r/GUI/MainFrame.cpp:1354 src/slic3r/GUI/MainFrame.cpp:1358
#: src/slic3r/GUI/MainFrame.cpp:1525 src/slic3r/GUI/MainFrame.cpp:1529
msgid "Re&load from Disk"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1364
msgid "Searc&h"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1365
msgid "Search in settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1373
msgid "&Plater Tab"
msgstr "&Tabla Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1373
msgid "Show the plater"
msgstr "Tablayı göster"

#: src/slic3r/GUI/MainFrame.cpp:1378
msgid "P&rint Settings Tab"
msgstr "B&askı Ayarları Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1378
msgid "Show the print settings"
msgstr "Baskı ayarlarını göster"

#: src/slic3r/GUI/MainFrame.cpp:1381 src/slic3r/GUI/MainFrame.cpp:1585
msgid "&Filament Settings Tab"
msgstr "& Filament Ayarları Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1381
msgid "Show the filament settings"
msgstr "Filament ayarlarını göster"

#: src/slic3r/GUI/MainFrame.cpp:1385
msgid "Print&er Settings Tab"
msgstr "Yazıcı Ayarları S&ekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1385
msgid "Show the printer settings"
msgstr "Yazıcı ayarlarını göster"

#: src/slic3r/GUI/MainFrame.cpp:1391
msgid "3&D"
msgstr "3&B"

#: src/slic3r/GUI/MainFrame.cpp:1391
msgid "Show the 3D editing view"
msgstr "3B düzenleme görünümünü göster"

#: src/slic3r/GUI/MainFrame.cpp:1394
msgid "Pre&view"
msgstr "Ön izleme"

#: src/slic3r/GUI/MainFrame.cpp:1394
msgid "Show the 3D slices preview"
msgstr "3B dilimleme ön izlemesini göster"

#: src/slic3r/GUI/MainFrame.cpp:1400
msgid "Open the dialog to modify shape gallery"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1412
msgid "Print &Host Upload Queue"
msgstr "Yazdırma ve Ana Bilgisayar Yükleme Kuyruğu"

#: src/slic3r/GUI/MainFrame.cpp:1412
msgid "Display the Print Host Upload Queue window"
msgstr "Ana Bilgisayar Yükleme Sırasını Yazdır penceresini görüntüle"

#: src/slic3r/GUI/MainFrame.cpp:1416
msgid "Open New Instance"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1420
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1563
msgid "Compare Presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1420
msgid "Compare presets"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1430
msgid "Show &Labels"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1430
msgid "Show object/instance labels in 3D scene"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1433
msgid "&Collapse Sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1433 src/slic3r/GUI/Plater.cpp:2320
msgid "Collapse sidebar"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1438
msgid "&Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1438
msgid "Fullscreen"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1453 src/slic3r/GUI/MainFrame.cpp:1556
msgid "&File"
msgstr "&Dosya"

#: src/slic3r/GUI/MainFrame.cpp:1454
msgid "&Edit"
msgstr "&Düzenle"

#: src/slic3r/GUI/MainFrame.cpp:1455
msgid "&Window"
msgstr "&Pencere"

#: src/slic3r/GUI/MainFrame.cpp:1456 src/slic3r/GUI/MainFrame.cpp:1557
msgid "&View"
msgstr "&Görünüm"

#: src/slic3r/GUI/MainFrame.cpp:1459 src/slic3r/GUI/MainFrame.cpp:1560
msgid "&Help"
msgstr "&Yardım"

#: src/slic3r/GUI/MainFrame.cpp:1521
msgid "&Open G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1537
msgid "Open &PrusaSlicer"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1582
msgid "E&xport"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1583
msgid "S&end to print"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1585
msgid "Mate&rial Settings Tab"
msgstr "Mate&ryal Ayarları Sekmesi"

#: src/slic3r/GUI/MainFrame.cpp:1609
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "Dilimlemek için bir dosya seçin (STL / OBJ / AMF / 3MF / PRUSA):"

#: src/slic3r/GUI/MainFrame.cpp:1621
msgid "No previously sliced file."
msgstr "Daha önce dilimlenmiş dosya yok."

#: src/slic3r/GUI/MainFrame.cpp:1628
msgid "Previously sliced file ("
msgstr "Önceden dilimlenmiş dosya ("

#: src/slic3r/GUI/MainFrame.cpp:1628
msgid ") not found."
msgstr ") bulunamadı."

#: src/slic3r/GUI/MainFrame.cpp:1629
msgid "File Not Found"
msgstr "Dosya bulunamadı"

#: src/slic3r/GUI/MainFrame.cpp:1664
#, c-format, boost-format
msgid "Save %s file as:"
msgstr "%s dosyasını farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1664
msgid "SVG"
msgstr "SVG"

#: src/slic3r/GUI/MainFrame.cpp:1664
msgid "G-code"
msgstr "G-kod"

#: src/slic3r/GUI/MainFrame.cpp:1676
msgid "Save zip file as:"
msgstr "Zip dosyasını farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1685 src/slic3r/GUI/Plater.cpp:3316
#: src/slic3r/GUI/Plater.cpp:6051 src/slic3r/GUI/Tab.cpp:1663
#: src/slic3r/GUI/Tab.cpp:4729
msgid "Slicing"
msgstr "Dilimleme"

#. TRN "Processing input_file_basename"
#: src/slic3r/GUI/MainFrame.cpp:1687
#, c-format, boost-format
msgid "Processing %s"
msgstr "%s"

#: src/slic3r/GUI/MainFrame.cpp:1710
#, boost-format
msgid "%1% was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1713
msgid "Slicing Done!"
msgstr "Dilimleme Yapıldı!"

#: src/slic3r/GUI/MainFrame.cpp:1729
msgid "Select the STL file to repair:"
msgstr "Onarılacak STL dosyasını seçin:"

#: src/slic3r/GUI/MainFrame.cpp:1739
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""
"OBJ dosyasını kaydet (hataları STL'den koordine etmeye daha az eğilimli):"

#: src/slic3r/GUI/MainFrame.cpp:1750
msgid "Your file was repaired."
msgstr "Dosyanız onarıldı."

#: src/slic3r/GUI/MainFrame.cpp:1750 src/libslic3r/PrintConfig.cpp:4521
msgid "Repair"
msgstr "Onar"

#: src/slic3r/GUI/MainFrame.cpp:1764
msgid "Save configuration as:"
msgstr "Yapılandırmayı farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1781
msgid "Loading of a configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1783 src/slic3r/GUI/MainFrame.cpp:1848
msgid "Select configuration to load:"
msgstr "Yüklenecek yapılandırmayı seçin:"

#: src/slic3r/GUI/MainFrame.cpp:1812
msgid "Exporting configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1813
msgid ""
"Some presets are modified and the unsaved changes will not be exported into "
"configuration bundle."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1822
msgid "Save presets bundle as:"
msgstr "Ön ayar paketini farklı kaydet:"

#: src/slic3r/GUI/MainFrame.cpp:1845
msgid "Loading of a configuration bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:1875
#, c-format, boost-format
msgid "%d presets successfully imported."
msgstr "%d ön ayar başarıyla içe aktarıldı."

#: src/slic3r/GUI/Mouse3DController.cpp:453
msgid "3Dconnexion settings"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:464
msgid "Device:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:469
msgid "Speed:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:472
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Translation"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:484
#: src/slic3r/GUI/Mouse3DController.cpp:493
msgid "Zoom"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:490
msgid "Deadzone:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:505
msgid "Options:"
msgstr ""

#: src/slic3r/GUI/Mouse3DController.cpp:508
msgid "Swap Y/Z axes"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:227
#, c-format, boost-format
msgid "%s error"
msgstr "%s hata"

#: src/slic3r/GUI/MsgDialog.cpp:228
#, c-format, boost-format
msgid "%s has encountered an error"
msgstr "%s bir hatayla karşılaştı"

#: src/slic3r/GUI/MsgDialog.cpp:247
#, c-format, boost-format
msgid "%s warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:248
#, c-format, boost-format
msgid "%s has a warning"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:261 src/slic3r/GUI/MsgDialog.cpp:274
#, c-format, boost-format
msgid "%s info"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:302
#, c-format, boost-format
msgid "%s information"
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:752
msgid "3D Mouse disconnected."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:753
msgid "Configuration update is available."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:753
msgid "See more."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:761
msgid ""
"You have just added a G-code for color change, but its value is empty.\n"
"To export the G-code correctly, check the \"Color Change G-code\" in "
"\"Printer Settings > Custom G-code\""
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:764
msgid ""
"No color change event was added to the print. The print does not look like a "
"sign."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:766
msgid "Desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:768
msgid "Desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:770
msgid "Undo desktop integration was successful."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:772
msgid "Undo desktop integration failed."
msgstr ""

#: src/slic3r/GUI/NotificationManager.hpp:773
msgid "Exporting."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:664
msgid "Open Folder."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:701
msgid "Eject drive"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:885
msgid "ERROR"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:890
msgid "CANCELED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:895
msgid "COMPLETED"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:937
msgid "Cancel upload"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:996
#, c-format, boost-format
msgid "%1$d object was loaded with custom supports."
msgid_plural "%1$d objects were loaded with custom supports."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:997
#, c-format, boost-format
msgid "%1$d object was loaded with custom seam."
msgid_plural "%1$d objects were loaded with custom seam."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:998
#, c-format, boost-format
msgid "%1$d object was loaded with multimaterial painting."
msgid_plural "%1$d objects were loaded with multimaterial painting."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:999
#, c-format, boost-format
msgid "%1$d object was loaded with variable layer height."
msgid_plural "%1$d objects were loaded with variable layer height."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1000
#, c-format, boost-format
msgid "%1$d object was loaded with partial sinking."
msgid_plural "%1$d objects were loaded with partial sinking."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/NotificationManager.cpp:1113
msgid "Slicing finished."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1113
msgid "Export G-Code."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1113
msgid "Export."
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1447
#: src/slic3r/GUI/NotificationManager.cpp:1454
#: src/slic3r/GUI/NotificationManager.cpp:1470
#: src/slic3r/GUI/NotificationManager.cpp:1476
#: src/slic3r/GUI/NotificationManager.cpp:1547
msgid "ERROR:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1459
#: src/slic3r/GUI/NotificationManager.cpp:1486
#: src/slic3r/GUI/NotificationManager.cpp:1494
#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3184
msgid "WARNING:"
msgstr ""

#: src/slic3r/GUI/NotificationManager.cpp:1598
msgid "Exporting finished."
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:50
msgid "Paint-on seam"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:52
msgid "Sinking"
msgstr ""

#: src/slic3r/GUI/ObjectDataViewModel.cpp:94
msgid "Instances"
msgstr "Örnekleri"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:98
#: src/slic3r/GUI/ObjectDataViewModel.cpp:266
#, c-format, boost-format
msgid "Instance %d"
msgstr "Kopya %d"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4567
#: src/slic3r/GUI/Tab.cpp:4658
msgid "Layers"
msgstr "Katmanlar"

#: src/slic3r/GUI/ObjectDataViewModel.cpp:134
msgid "Range"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:257
#, c-format, boost-format
msgid ""
"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
"while OpenGL version %s, render %s, vendor %s was detected."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:260
msgid "You may need to update your graphics card driver."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:263
msgid ""
"As a workaround, you may run PrusaSlicer with a software rendered 3D "
"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:265
msgid "Unsupported OpenGL version"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:273
#, c-format, boost-format
msgid ""
"Unable to load the following shaders:\n"
"%s"
msgstr ""

#: src/slic3r/GUI/OpenGLManager.cpp:274
msgid "Error loading shaders"
msgstr ""

#: src/slic3r/GUI/OptionsGroup.cpp:352
msgctxt "Layers"
msgid "Top"
msgstr "Üst"

#: src/slic3r/GUI/OptionsGroup.cpp:352
msgctxt "Layers"
msgid "Bottom"
msgstr "Alt"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
msgid "Delete this preset from this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:83
msgid "This printer will be shown in the presets list as"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
msgid "Type here the name of your printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
msgid "Descriptive name for the printer"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
msgid "Add preset for this printer device"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2254
msgid "Print Host upload"
msgstr "Ana Bilgisayar yüklemesini yazdır"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:268
msgid "Connection to printers connected via the print host failed."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:310
msgid "Test"
msgstr "Ölçek"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:315
msgid "Could not get a valid Printer Host reference"
msgstr "Geçerli bir Yazıcı Ana Bilgisayar başvurusu alınamadı"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327
msgid "Success!"
msgstr "Başarı!"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337
msgid "Refresh Printers"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:364
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS CA dosyası isteğe bağlıdır. HTTPS'yi kendinden imzalı bir sertifika "
"ile kullanıyorsanız gereklidir."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:374
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "Sertifika dosyaları (*.crt, *.pem) | *.crt; * Pem | Tüm dosyalar | *.*"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
msgid "Open CA certificate file"
msgstr "CA sertifika dosyasını aç"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:404
#: src/libslic3r/PrintConfig.cpp:329
msgid "HTTPS CA File"
msgstr "HTTPS CA Dosyası"

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:405
#, c-format, boost-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
"Bu sistemde, %s , sistem Sertifika Deposu veya Anahtarlıktan HTTPS "
"sertifikaları kullanır."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:406
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"Özel bir CA dosyası kullanmak için, lütfen CA dosyanızı Sertifika Deposu/"
"Anahtarlık içine aktarın."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:630
msgid "The supplied name is empty. It can't be saved."
msgstr "Sağlanan ad boş. Kurtarılamaz."

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:634
msgid "You have to enter a printer name."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:642
#, boost-format
msgid "Printer with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:643
msgid "Replace?"
msgstr ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:670
#, boost-format
msgid ""
"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
"\" will be used just once."
msgid_plural ""
"Following printer presets are duplicated:%1%The above presets for printer "
"\"%2%\" will be used just once."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:720
msgid "It's not possible to delete the last related preset for the printer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:141
msgid "The provided name is not valid;"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:142 src/slic3r/GUI/SavePresetDialog.cpp:102
msgid "the following characters are not allowed:"
msgstr "aşağıdaki karakterlere izin verilmez:"

#: src/slic3r/GUI/Plater.cpp:207
msgid ""
"For a multipart object, this value isn't accurate.\n"
"It doesn't take account of intersections and negative volumes."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:211
msgid "Volume"
msgstr "Hacim"

#: src/slic3r/GUI/Plater.cpp:213
msgid "Facets"
msgstr "Yüzey Sayısı"

#: src/slic3r/GUI/Plater.cpp:276
msgid "Sliced Info"
msgstr "Dilimlenmiş Bilgi"

#: src/slic3r/GUI/Plater.cpp:296 src/slic3r/GUI/Plater.cpp:1377
msgid "Used Filament (g)"
msgstr "Kullanılan Filament (g)"

#: src/slic3r/GUI/Plater.cpp:297 src/slic3r/GUI/Plater.cpp:1358
msgid "Used Filament (m)"
msgstr "Kullanılan Filament (m)"

#: src/slic3r/GUI/Plater.cpp:298 src/slic3r/GUI/Plater.cpp:1370
msgid "Used Filament (mm³)"
msgstr "Kullanılan Filament (mm³)"

#: src/slic3r/GUI/Plater.cpp:299
msgid "Used Material (unit)"
msgstr "Kullanılan Malzeme (birim)"

#: src/slic3r/GUI/Plater.cpp:300
msgid "Cost (money)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:301 src/slic3r/GUI/Plater.cpp:1340
#: src/slic3r/GUI/Plater.cpp:1427
msgid "Estimated printing time"
msgstr "Tahmini baskı süresi"

#: src/slic3r/GUI/Plater.cpp:302
msgid "Number of tool changes"
msgstr "Takım değişikliği sayısı"

#: src/slic3r/GUI/Plater.cpp:431
msgid "Select what kind of support do you need"
msgstr "Ne tür bir desteğe ihtiyacınız olduğunu seçin"

#: src/slic3r/GUI/Plater.cpp:433 src/libslic3r/PrintConfig.cpp:2558
#: src/libslic3r/PrintConfig.cpp:3640
msgid "Support on build plate only"
msgstr "Yalnızca tablada destek"

#: src/slic3r/GUI/Plater.cpp:434 src/slic3r/GUI/Plater.cpp:564
msgid "For support enforcers only"
msgstr "Yalnızca destek uygulayıcıları için"

#: src/slic3r/GUI/Plater.cpp:435
msgid "Everywhere"
msgstr "Her yerde"

#: src/slic3r/GUI/Plater.cpp:467 src/slic3r/GUI/Tab.cpp:1542
msgid "Brim"
msgstr "Kenar (Brim)"

#: src/slic3r/GUI/Plater.cpp:469
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""
"Bu bayrak, ilk katmandaki her nesnenin etrafına basılacak kenarı (brim) "
"etkinleştirir."

#: src/slic3r/GUI/Plater.cpp:477
msgid "Purging volumes"
msgstr "Boşaltma hacimleri"

#: src/slic3r/GUI/Plater.cpp:578
msgid "Select what kind of pad do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:580
msgid "Below object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:581
msgid "Around object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:894 src/slic3r/GUI/Plater.cpp:6531
msgid "Send to printer"
msgstr "Yazıcıya gönder"

#: src/slic3r/GUI/Plater.cpp:914 src/slic3r/GUI/Plater.cpp:3316
#: src/slic3r/GUI/Plater.cpp:6054
msgid "Slice now"
msgstr "Şimdi dilimle"

#: src/slic3r/GUI/Plater.cpp:1087
msgid "Hold Shift to Slice & Export G-code"
msgstr ""
"Dilimlemek ve G-code olarak Dışa Aktarmak için Üst Karakter(Shift) tuşunu "
"basılı tutun"

#: src/slic3r/GUI/Plater.cpp:1287
#, boost-format
msgid "%1% (%2$d shell)"
msgid_plural "%1% (%2$d shells)"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1315
msgid "Used Material (ml)"
msgstr "Kullanılan Malzeme (ml)"

#: src/slic3r/GUI/Plater.cpp:1318
msgid "object"
msgid_plural "objects"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:1318
msgid "supports and pad"
msgstr "destekler ve ped"

#: src/slic3r/GUI/Plater.cpp:1358
msgid "Used Filament (in)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1360 src/slic3r/GUI/Plater.cpp:1413
msgid "objects"
msgstr "nesneleri"

#: src/slic3r/GUI/Plater.cpp:1360 src/slic3r/GUI/Plater.cpp:1413
msgid "wipe tower"
msgstr "temizleme kulesi"

#: src/slic3r/GUI/Plater.cpp:1370
msgid "Used Filament (in³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1396
#, boost-format
msgid "Filament at extruder %1%"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1402
msgid "(including spool)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1411 src/libslic3r/PrintConfig.cpp:1067
#: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3435
msgid "Cost"
msgstr "Maliyet"

#: src/slic3r/GUI/Plater.cpp:1429
msgid "normal mode"
msgstr "normal mod"

#: src/slic3r/GUI/Plater.cpp:1436
msgid "stealth mode"
msgstr "gizli mod"

#: src/slic3r/GUI/Plater.cpp:1670
msgid "Fill bed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1676
msgid "Optimize Rotation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1682
msgid "Import SLA archive"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1725
#, boost-format
msgid "Do you want to save the changes to \"%1%\"?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1730 src/slic3r/GUI/Preferences.cpp:222
msgid "Ask for unsaved changes in project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1733
msgid ""
"You will not be asked about it again, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2198
#, c-format, boost-format
msgid ""
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
"computer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2203
#, c-format, boost-format
msgid "Ejecting of device %s(%s) has failed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2222 src/slic3r/GUI/Plater.cpp:5095
msgid "New Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2319
msgid "Expand sidebar"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2507
msgid ""
"The preset below was temporarily installed on the active instance of "
"PrusaSlicer"
msgid_plural ""
"The presets below were temporarily installed on the active instance of "
"PrusaSlicer"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2537
#, boost-format
msgid "Failed loading file \"%1%\" due to an invalid configuration."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2557
#, c-format, boost-format
msgid ""
"Object size from file %s appears to be zero.\n"
"This object has been removed from the model"
msgid_plural ""
"Objects size from file %s appears to be zero.\n"
"These objects have been removed from the model"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2561
msgid "The size of the object is zero"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2574
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in meters.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2578 src/slic3r/GUI/Plater.cpp:2600
msgid "The object is too small"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2579 src/slic3r/GUI/Plater.cpp:2601
msgid "Apply to all the remaining small objects being loaded."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2596
#, c-format, boost-format
msgid ""
"The dimensions of the object from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of the object?"
msgid_plural ""
"The dimensions of some objects from file %s seem to be defined in inches.\n"
"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
"the dimensions of these objects?"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Plater.cpp:2614
msgid ""
"This file contains several objects positioned at multiple heights.\n"
"Instead of considering them as multiple objects, should \n"
"the file be loaded as a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2617 src/slic3r/GUI/Plater.cpp:2672
msgid "Multi-part object detected"
msgstr "Çok parçalı nesne algılandı"

#: src/slic3r/GUI/Plater.cpp:2625
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2626
msgid "Detected advanced data"
msgstr "Gelişmiş veriler tespit edildi"

#: src/slic3r/GUI/Plater.cpp:2646
#, c-format, boost-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""
"%s öğesinden nesne ekleyemezsiniz çünkü bir yada bir kaçı çoklu parçadan "
"oluşuyor"

#: src/slic3r/GUI/Plater.cpp:2669
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2788
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""
"Nesneniz çok büyük görünüyor, bu nedenle baskı tablanıza uyacak şekilde "
"otomatik olarak küçültüldü."

#: src/slic3r/GUI/Plater.cpp:2789
msgid "Object too large?"
msgstr "Nesne çok mu büyük?"

#: src/slic3r/GUI/Plater.cpp:2867
msgid "Export STL file:"
msgstr "Dışa aktarılacak STL dosya:"

#: src/slic3r/GUI/Plater.cpp:2874
msgid "Export AMF file:"
msgstr "AMF dosyasını dışa aktar:"

#: src/slic3r/GUI/Plater.cpp:2880
msgid "Save file as:"
msgstr "Farklı kaydet:"

#: src/slic3r/GUI/Plater.cpp:2886
msgid "Export OBJ file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2984
msgid "Delete Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2996
msgid "Delete All Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3024
msgid "Reset Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3107
msgid ""
"The selected object couldn't be split because it contains only one solid "
"part."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3114
msgid "All non-solid parts (modifiers) were deleted"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3116
msgid "Split to Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3166
msgid ""
"An object has custom support enforcers which will not be used because "
"supports are disabled."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3168
msgid "Enable supports for enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3297 src/slic3r/GUI/Plater.cpp:4163
msgid "Invalid data"
msgstr "Geçersiz veri"

#: src/slic3r/GUI/Plater.cpp:3367
msgid "Another export job is currently running."
msgstr "Şu anda başka bir dışa aktarma işlemi çalışıyor."

#: src/slic3r/GUI/Plater.cpp:3453
msgid "Replace from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3471
msgid "Unable to replace with more than one volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3471 src/slic3r/GUI/Plater.cpp:3550
msgid "Error during replace"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3542
msgid "Select the new file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3550
msgid "File for the replace wasn't selected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3641
msgid "Please select the file to reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3672 src/slic3r/GUI/Plater.cpp:5230
msgid "The selected file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3673
msgid "differs from the original file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3673
msgid "Do you want to replace it"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3690 src/slic3r/GUI/Plater.cpp:3696
msgid "Reload from:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3799
msgid "Unable to reload:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3804
msgid "Error during reload"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3822
msgid "Reload all from disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4117
msgid "There are active warnings concerning sliced models:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4128
msgid "generated warnings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4459
msgid "3D editor view"
msgstr "3B düzenleme görünümü"

#: src/slic3r/GUI/Plater.cpp:4880
msgid "Undo / Redo is processing"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:4882
#, boost-format
msgid ""
"Switching the printer technology from %1% to %2%.\n"
"Some %1% presets were modified, which will be lost after switching the "
"printer technology."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5079
msgid "Creating a new project while the current project is modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5082
msgid "Creating a new project while some presets are modified."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5083
msgid "You can keep presets modifications to the new project or discard them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5084
msgid ""
"You can keep presets modifications to the new project, discard them or save "
"changes as new presets.\n"
"Note, if changes will be saved then new project wouldn't keep them"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5090
msgid "Creating a new project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5124
msgid "Load Project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5154 src/slic3r/GUI/Plater.cpp:5419
msgid "Import Object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5158
msgid "Import Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5230
msgid "does not contain valid gcode."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5231
msgid "Error while loading .gcode file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5284
#, c-format, boost-format
msgid "%s - Drop project file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5291
msgid "Open as project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5292
msgid "Import geometry only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5293
msgid "Import config only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5296
msgid "Select an action to apply to the file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5301
msgid "Action"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5317
msgid "Don't show again"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5358
msgid "You can open only one .gcode file at a time."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5359
msgid "Drag and drop G-code file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5441
msgid "Load File"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5446
msgid "Load Files"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5496
msgid "All objects will be removed, continue?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5507
msgid "Delete Selected Objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5516
msgid "Increase Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5550
msgid "Decrease Instances"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5601
msgid "Enter the number of copies:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5602
msgid "Copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5606
#, c-format, boost-format
msgid "Set numbers of copies to %d"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5684
msgid "Cut by Plane"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5744
msgid "Save G-code file as:"
msgstr "G kodu dosyasını farklı kaydet:"

#: src/slic3r/GUI/Plater.cpp:5744
msgid "Save SL1 / SL1S file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5753
msgid "The provided file name is not valid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5754
msgid "The following characters are not allowed by a FAT file system:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5944
msgid ""
"The plater is empty.\n"
"Do you want to save the project?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:5944
msgid "Save project"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6530
msgid "Export"
msgstr "Dışa Aktar"

#: src/slic3r/GUI/Plater.cpp:6562
msgid ""
"Custom supports, seams and multimaterial painting were removed after "
"repairing the mesh."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:6676
msgid "Paste From Clipboard"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2289
#: src/slic3r/GUI/Tab.cpp:2516 src/slic3r/GUI/Tab.cpp:2623
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1287
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1674
msgid "General"
msgstr "Genel"

#: src/slic3r/GUI/Preferences.cpp:121
msgid "Remember output directory"
msgstr "Çıkış dizinini hatırla"

#: src/slic3r/GUI/Preferences.cpp:123
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"Bu etkinse, Slic3r giriş dosyalarını içeren yerine son çıkış dizinini "
"soracaktır."

#: src/slic3r/GUI/Preferences.cpp:129
msgid "Auto-center parts"
msgstr "Parçaları otomatik ortala"

#: src/slic3r/GUI/Preferences.cpp:131
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""
"Bu etkinse, Slic3r nesneleri tabla merkezinin çevresinde otomatik ortalar."

#: src/slic3r/GUI/Preferences.cpp:137
msgid "Background processing"
msgstr "Arkaplan işleme"

#: src/slic3r/GUI/Preferences.cpp:139
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"Bu etkinse, Slic3r, G kodunu dışa aktarırken zaman kazanmak için nesneleri "
"yüklendikleri anda işleme koyar."

#: src/slic3r/GUI/Preferences.cpp:148
msgid "Export sources full pathnames to 3mf and amf"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:150
msgid ""
"If enabled, allows the Reload from disk command to automatically find and "
"load the files when invoked."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:159
msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:166
msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:177
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"Etkinleştirilirse Slic3r, arka planda yerleşik sistem ön ayarları "
"güncelleştirmelerini indirir. Bu güncellemeler ayrı bir geçici konuma "
"indirilir. Yeni önceden ayarlanmış bir sürüm kullanıma sunulduğunda, "
"uygulama başlangıcında sunulur."

#: src/slic3r/GUI/Preferences.cpp:182
msgid "Suppress \" - default - \" presets"
msgstr "\\ \"- varsayılan - \" ön ayarları bastır"

#: src/slic3r/GUI/Preferences.cpp:184
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"Kullanılabilir başka geçerli hazır ayarlar bulunduğunda, Yazdır / Filament / "
"Yazıcı seçimlerinde \\ \"- varsayılan - \" hazır ayarlarını bastırın."

#: src/slic3r/GUI/Preferences.cpp:190
msgid "Show incompatible print and filament presets"
msgstr "Uyumsuz baskı ve filament hazır ayarları göster"

#: src/slic3r/GUI/Preferences.cpp:192
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"İşaretlendiğinde, yazdırma ve filament hazır ayarları, etkin yazıcıyla "
"uyumsuz olarak işaretlenmiş olsalar bile hazır ayar düzenleyicisinde "
"gösterilir"

#: src/slic3r/GUI/Preferences.cpp:200
msgid "Show drop project dialog"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:202
msgid ""
"When checked, whenever dragging and dropping a project file on the "
"application, shows a dialog asking to select the action to take on the file "
"to load."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:208 src/slic3r/GUI/Preferences.cpp:212
msgid "Allow just a single PrusaSlicer instance"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:210
msgid ""
"On OSX there is always only one instance of app running by default. However "
"it is allowed to run multiple instances of same app from the command line. "
"In such case this settings will allow only one instance."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:214
msgid ""
"If this is enabled, when starting PrusaSlicer and another instance of the "
"same PrusaSlicer is already running, that instance will be reactivated "
"instead."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:224
msgid ""
"Always ask for unsaved changes in project, when: \n"
"- Closing PrusaSlicer,\n"
"- Loading or creating a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:233
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
msgid ""
"Ask to save unsaved changes in presets when closing the application or when "
"loading a new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:235
msgid ""
"Always ask for unsaved changes in presets, when: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:242
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
msgid "Ask for unsaved changes in presets when selecting new preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:244
msgid ""
"Always ask for unsaved changes in presets when selecting new preset or "
"resetting a preset"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:249
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
msgid "Ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:251
msgid "Always ask for unsaved changes in presets when creating new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:258
msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:260
msgid ""
"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
"gcode files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:268
msgid "Use Retina resolution for the 3D scene"
msgstr "3B sahne için Retina çözünürlüğünü kullan"

#: src/slic3r/GUI/Preferences.cpp:270
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"Etkinleştirilirse, 3D sahne Retina çözünürlüğünde oluşturulur. 3B performans "
"sorunları yaşıyorsanız, bu seçeneğin devre dışı bırakılması yardımcı "
"olabilir."

#: src/slic3r/GUI/Preferences.cpp:280 src/slic3r/GUI/Preferences.cpp:282
msgid "Show splash screen"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:289
msgid "If enabled, PrusaSlicer will be open at the position it was closed"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:295
msgid "Clear Undo / Redo stack on new project"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:297
msgid ""
"Clear Undo / Redo stack on new project or when an existing project is loaded."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:303
msgid "Enable support for legacy 3DConnexion devices"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:305
msgid ""
"If enabled, the legacy 3DConnexion devices settings dialog is available by "
"pressing CTRL+M"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:314
msgid "Camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:319
msgid "Use perspective camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:321
msgid ""
"If enabled, use perspective camera. If not enabled, use orthographic camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:326
msgid "Use free camera"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:328
msgid "If enabled, use free camera. If not enabled, use constrained camera."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:333
msgid "Reverse direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:335
msgid "If enabled, reverses the direction of zoom with mouse wheel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:343
msgid "GUI"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:366
msgid "Sequential slider applied only to top layer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:368
msgid ""
"If enabled, changes made using the sequential slider, in preview, apply only "
"to gcode top layer. If disabled, changes made using the sequential slider, "
"in preview, apply to the whole gcode."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:375
msgid "Show sidebar collapse/expand button"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:377
msgid ""
"If enabled, the button for the collapse sidebar will be appeared in top "
"right corner of the 3D Scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:384
msgid "If enabled, PrusaSlicer will not open hyperlinks in your browser."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:391
msgid "Use colors for axes values in Manipulation panel"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:393
msgid ""
"If enabled, the axes names and axes values will be colorized according to "
"the axes colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:399
msgid "Order object volumes by types"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:401
msgid ""
"If enabled, volumes will be always ordered inside the object. Correct order "
"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
"Modifiers. But one of the model parts have to be on the first place."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:408
msgid "Set settings tabs as menu items (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:410
msgid ""
"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
"will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:419
msgid "Show \"Tip of the day\" notification after start"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:421
msgid "If enabled, useful hints are displayed at startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:427
msgid "Notify about new releases"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:429
msgid ""
"You will be notified about new release after startup acordingly: All = "
"Regular release and alpha / beta releases. Release only = regular release."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:435
msgid "Release only"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:444
msgid "Use custom size for toolbar icons"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:446
msgid "If enabled, you can change size of toolbar icons manually."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:471
msgid "Render"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:476
msgid "Use environment map"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:478
msgid "If enabled, renders object using the environment map."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:491
msgid "Dark mode (experimental)"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:496
msgid "Enable dark mode"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:498
msgid ""
"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:507
msgid "Use system menu for application"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:509
msgid ""
"If enabled, application will use the standard Windows system menu,\n"
"but on some combination of display scales it can looks ugly. If disabled, "
"old UI will be used."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:578
msgid "Changes for the critical options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:580
msgid ""
"Changing some options will trigger application restart.\n"
"You will lose the content of the plater."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:694
msgid "Icon size in a respect to the default size"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:709
msgid "Select toolbar icon size in respect to the default one."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:743 src/slic3r/GUI/Preferences.cpp:754
msgid "Old regular layout with the tab bar"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:744
msgid "New layout, access via settings button in the top menu"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:745 src/slic3r/GUI/Preferences.cpp:755
msgid "Settings in non-modal window"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:763
msgid "Layout Options"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:806
msgid "Text colors"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:249
#: src/slic3r/GUI/PresetComboBoxes.cpp:287
#: src/slic3r/GUI/PresetComboBoxes.cpp:794
#: src/slic3r/GUI/PresetComboBoxes.cpp:849
#: src/slic3r/GUI/PresetComboBoxes.cpp:989
#: src/slic3r/GUI/PresetComboBoxes.cpp:1033
msgid "System presets"
msgstr "Sistem ön ayarları"

#: src/slic3r/GUI/PresetComboBoxes.cpp:291
#: src/slic3r/GUI/PresetComboBoxes.cpp:853
#: src/slic3r/GUI/PresetComboBoxes.cpp:1037
msgid "User presets"
msgstr "Kullanıcı ön ayarları"

#: src/slic3r/GUI/PresetComboBoxes.cpp:302
msgid "Incompatible presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:337
#, boost-format
msgid "Are you sure you want to delete \"%1%\" printer?"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:340
msgid "Delete Physical Printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:581
msgid "Click to edit preset"
msgstr "Hazır ayarı düzenlemek için tıklayın"

#: src/slic3r/GUI/PresetComboBoxes.cpp:697
#: src/slic3r/GUI/PresetComboBoxes.cpp:737
msgid "Add/Remove presets"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:702
#: src/slic3r/GUI/PresetComboBoxes.cpp:742 src/slic3r/GUI/Tab.cpp:3247
msgid "Add physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:716
msgid "Edit preset"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:722
msgid "Change extruder color"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:730 src/slic3r/GUI/Tab.cpp:3247
msgid "Edit physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:733
msgid "Delete physical printer"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:864
#: src/slic3r/GUI/PresetComboBoxes.cpp:1051
msgid "Physical printers"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:888
msgid "Add/Remove filaments"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:890
msgid "Add/Remove materials"
msgstr ""

#: src/slic3r/GUI/PresetComboBoxes.cpp:892
#: src/slic3r/GUI/PresetComboBoxes.cpp:1075
msgid "Add/Remove printers"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:32
#, boost-format
msgid ""
"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
"speed will be reduced so that no less than %3%s are spent on that layer "
"(however, speed will never be reduced below %4%mm/s)."
msgstr ""
"Tahmini katman süresi ~%1%s'nin altındaysa, fan %2%%% oranında çalışır ve "
"baskı hızı düşürülür, böylece bu katmana %3%s'den az harcanmaz (ancak hız "
"asla %4%mm/s altına düşürülmez)."

#: src/slic3r/GUI/PresetHints.cpp:40
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
"proportionally decreasing speed between %2%%% and %3%%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:44
#, boost-format
msgid ""
"If estimated layer time is greater, but still below ~%1%s, fan will run at "
"%2%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:55
#, boost-format
msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "During the other layers, fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:57
#, boost-format
msgid "Fan will always run at %1%%%"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:59
#, boost-format
msgid "except for the first %1% layers."
msgstr "ilk %1% katman hariç."

#: src/slic3r/GUI/PresetHints.cpp:61
msgid "except for the first layer."
msgstr "ilk katman hariç."

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "During the other layers, fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:64
msgid "Fan will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:170
msgid "external perimeters"
msgstr "dış duvar"

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "perimeters"
msgstr "duvarlar"

#: src/slic3r/GUI/PresetHints.cpp:174
msgid "infill"
msgstr "dolgu"

#: src/slic3r/GUI/PresetHints.cpp:176
msgid "solid infill"
msgstr "katı dolgu"

#: src/slic3r/GUI/PresetHints.cpp:178
msgid "top solid infill"
msgstr "üst katı dolgu"

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "support"
msgstr "destek"

#: src/slic3r/GUI/PresetHints.cpp:183
msgid "support interface"
msgstr "destek bağlantısı"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "First layer volumetric"
msgstr "İlk katman hacimsel"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Bridging volumetric"
msgstr "Hacimsel köprüleme"

#: src/slic3r/GUI/PresetHints.cpp:187
msgid "Volumetric"
msgstr "Volumetrik"

#: src/slic3r/GUI/PresetHints.cpp:188
msgid "flow rate is maximized"
msgstr "akış hızı en üst seviyeye ayarlandı"

#: src/slic3r/GUI/PresetHints.cpp:191
msgid "by the print profile maximum"
msgstr "en yüksek baskı profiline göre"

#: src/slic3r/GUI/PresetHints.cpp:192
msgid "when printing"
msgstr "yazdırırken"

#: src/slic3r/GUI/PresetHints.cpp:193
msgid "with a volumetric rate"
msgstr "hacimsel oranda"

#: src/slic3r/GUI/PresetHints.cpp:197
#, c-format, boost-format
msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
msgstr "%3.2f mm³/s filament hızında %3.2f mm/s."

#: src/slic3r/GUI/PresetHints.cpp:215
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""
"Önerilen nesne duvar kalınlığı: Geçersiz katman yüksekliği nedeniyle mevcut "
"değil."

#: src/slic3r/GUI/PresetHints.cpp:221
#, c-format, boost-format
msgid "Recommended object thin wall thickness for layer height %.2f and"
msgstr "Katman yüksekliği %.2f için önerilen duvar kalınlığı"

#: src/slic3r/GUI/PresetHints.cpp:236
#, c-format, boost-format
msgid "%d lines: %.2f mm"
msgstr "%d sıra: %.2f mm"

#: src/slic3r/GUI/PresetHints.cpp:240
msgid ""
"Recommended object thin wall thickness: Not available due to excessively "
"small extrusion width."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:269
msgid ""
"Top / bottom shell thickness hint: Not available due to invalid layer height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:282
#, boost-format
msgid "Top shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:285
#, boost-format
msgid "Minimum top shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:288
msgid "Top is open."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:301
#, boost-format
msgid "Bottom shell is %1% mm thick for layer height %2% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:304
#, boost-format
msgid "Minimum bottom shell thickness is %1% mm."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:307
msgid "Bottom is open."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:40
msgid "Send G-Code to printer host"
msgstr "G-Kodunu yazıcı ana bilgisayarına gönderin"

#: src/slic3r/GUI/PrintHostDialogs.cpp:40
msgid "Upload to Printer Host with the following filename:"
msgstr "Aşağıdaki dosya adıyla Yazıcı Ana Bilgisayarına yükleyin:"

#: src/slic3r/GUI/PrintHostDialogs.cpp:51
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr "Gerekirse, eğik çizgi (/) işlevini dizin ayırıcı olarak kullanın."

#: src/slic3r/GUI/PrintHostDialogs.cpp:60
msgid "Group"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:84
#, c-format, boost-format
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:91
msgid "Upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:101
msgid "Upload and Print"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:112
msgid "Upload and Simulate"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:247
msgid "ID"
msgstr "İD"

#: src/slic3r/GUI/PrintHostDialogs.cpp:248
msgid "Progress"
msgstr "İlerleme"

#: src/slic3r/GUI/PrintHostDialogs.cpp:249
msgid "Status"
msgstr "Durum"

#: src/slic3r/GUI/PrintHostDialogs.cpp:250
msgid "Host"
msgstr "Sunucu"

#: src/slic3r/GUI/PrintHostDialogs.cpp:251
msgctxt "OfFile"
msgid "Size"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:252
msgid "Filename"
msgstr "Dosya adı"

#: src/slic3r/GUI/PrintHostDialogs.cpp:253
msgid "Error Message"
msgstr "Hata mesajı"

#: src/slic3r/GUI/PrintHostDialogs.cpp:256
msgid "Cancel selected"
msgstr "Seçileni iptal et"

#: src/slic3r/GUI/PrintHostDialogs.cpp:258
msgid "Show error message"
msgstr "Hata mesajını göster"

#: src/slic3r/GUI/PrintHostDialogs.cpp:316
#: src/slic3r/GUI/PrintHostDialogs.cpp:371
msgid "Enqueued"
msgstr "Sıraya alındı"

#: src/slic3r/GUI/PrintHostDialogs.cpp:372
msgid "Uploading"
msgstr "Yükleme"

#: src/slic3r/GUI/PrintHostDialogs.cpp:374
msgid "Cancelling"
msgstr "İptal ediliyor"

#: src/slic3r/GUI/PrintHostDialogs.cpp:375
msgid "Cancelled"
msgstr "İptal edildi"

#: src/slic3r/GUI/PrintHostDialogs.cpp:376
msgid "Completed"
msgstr "Tamamlandı"

#: src/slic3r/GUI/PrintHostDialogs.cpp:424
msgid "Error uploading to print host:"
msgstr "Ana makineye yüklerken hata oluştu:"

#: src/slic3r/GUI/RammingChart.cpp:29
msgid "NO RAMMING AT ALL"
msgstr "TÜMÜNDE SIKIŞTIRMA YOK"

#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:114
#: src/libslic3r/PrintConfig.cpp:951 src/libslic3r/PrintConfig.cpp:995
#: src/libslic3r/PrintConfig.cpp:1010 src/libslic3r/PrintConfig.cpp:3292
#: src/libslic3r/PrintConfig.cpp:3301 src/libslic3r/PrintConfig.cpp:3310
#: src/libslic3r/PrintConfig.cpp:3451 src/libslic3r/PrintConfig.cpp:3459
#: src/libslic3r/PrintConfig.cpp:3467 src/libslic3r/PrintConfig.cpp:3474
#: src/libslic3r/PrintConfig.cpp:3482 src/libslic3r/PrintConfig.cpp:3490
msgid "s"
msgstr "s"

#: src/slic3r/GUI/RammingChart.cpp:95
msgid "Volumetric speed"
msgstr "Hacimsel hız"

#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:908
#: src/libslic3r/PrintConfig.cpp:1800
msgid "mm³/s"
msgstr "mm³/sn"

#: src/slic3r/GUI/SavePresetDialog.cpp:57
#, c-format, boost-format
msgid "Save %s as:"
msgstr "%s şu şekilde kaydet:"

#: src/slic3r/GUI/SavePresetDialog.cpp:101
#: src/slic3r/GUI/SavePresetDialog.cpp:109
msgid "The supplied name is not valid;"
msgstr "Sağlanan ad geçerli değil;"

#: src/slic3r/GUI/SavePresetDialog.cpp:110
msgid "the following suffix is not allowed:"
msgstr "aşağıdaki son eke izin verilmiyor:"

#: src/slic3r/GUI/SavePresetDialog.cpp:116
msgid "The supplied name is not available."
msgstr "Verilen isim mevcut değil."

#: src/slic3r/GUI/SavePresetDialog.cpp:122
msgid "Cannot overwrite a system profile."
msgstr "Bir sistem profilinin üzerine yazılamaz."

#: src/slic3r/GUI/SavePresetDialog.cpp:127
msgid "Cannot overwrite an external profile."
msgstr "Harici bir profilin üzerine yazılamaz."

#: src/slic3r/GUI/SavePresetDialog.cpp:134
#, boost-format
msgid "Preset with name \"%1%\" already exists."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:136
#, boost-format
msgid ""
"Preset with name \"%1%\" already exists and is incompatible with selected "
"printer."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:137
msgid "Note: This preset will be replaced after saving"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:142
msgid "The name cannot be empty."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:147
msgid "The name cannot start with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:152
msgid "The name cannot end with space character."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:157
msgid "The name cannot be the same as a preset alias name."
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:191
#: src/slic3r/GUI/SavePresetDialog.cpp:197
msgid "Save preset"
msgstr "Ön ayarı kaydet"

#: src/slic3r/GUI/SavePresetDialog.cpp:221
msgctxt "PresetName"
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:283
#, boost-format
msgid ""
"You have selected physical printer \"%1%\" \n"
"with related printer preset \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:322
#, boost-format
msgid "What would you like to do with \"%1%\" preset after saving?"
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:325
#, boost-format
msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:326
#, boost-format
msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
msgstr ""

#: src/slic3r/GUI/SavePresetDialog.cpp:327
#, boost-format
msgid "Just switch to \"%1%\" preset"
msgstr ""

#: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:336
#: src/slic3r/GUI/Tab.cpp:2651
msgid "Stealth"
msgstr "Gizli"

#: src/slic3r/GUI/Search.cpp:90 src/slic3r/GUI/Search.cpp:336
#: src/slic3r/GUI/Tab.cpp:2645
msgid "Normal"
msgstr "Normal"

#: src/slic3r/GUI/Selection.cpp:168
msgid "Selection-Add"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:209
msgid "Selection-Remove"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:241
msgid "Selection-Add Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:260
msgid "Selection-Remove Object"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:278
msgid "Selection-Add Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:297
msgid "Selection-Remove Instance"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:394
msgid "Selection-Add All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:419
msgid "Selection-Remove All"
msgstr ""

#: src/slic3r/GUI/Selection.cpp:950
msgid "Scale To Fit"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:114
msgid "Data to send"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:550
#: src/slic3r/GUI/SendSystemInfoDialog.cpp:618
msgid "Send system info"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:581
#, boost-format
msgid ""
"This is the first time you are running %1%. We would like to ask you to send "
"some of your system information to us. This will only happen once and we "
"will not ask you to do this again (only after you upgrade to the next "
"version)."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:585
msgid ""
"If we know your hardware, operating system, etc., it will greatly help us in "
"development and prioritization, because we will be able to focus our effort "
"more efficiently and spend time on features that are needed the most."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:588
msgid "Is it safe?"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:590
#, boost-format
msgid ""
"We do not send any personal information nor anything that would allow us to "
"identify you later. To detect duplicate entries, a unique number derived "
"from your system is sent, but the source information cannot be "
"reconstructed. Apart from that, only general data about your OS, hardware "
"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
"inspect the code actually performing the communication, see %1%."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:614
msgid "Show verbatim data that will be sent"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:616
msgid "Ask me next time"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:617
msgid "Do not send anything"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:703
msgid "System info sent successfully. Thank you."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:706
msgid "Sending system info failed!"
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:713
msgid "Sending system info was cancelled."
msgstr ""

#: src/slic3r/GUI/SendSystemInfoDialog.cpp:720
msgid "Sending system info..."
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:84
msgid "System Information"
msgstr "Sistem bilgisi"

#: src/slic3r/GUI/SysInfoDialog.cpp:150
msgid "Blacklisted libraries loaded into PrusaSlicer process:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:162
msgid "Eigen vectorization supported:"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:169
msgid "Copy to Clipboard"
msgstr "Panoya Kopyala"

#: src/slic3r/GUI/Tab.cpp:114 src/libslic3r/PrintConfig.cpp:564
msgid "Compatible printers"
msgstr "Uyumlu yazıcılar"

#: src/slic3r/GUI/Tab.cpp:115
msgid "Select the printers this profile is compatible with."
msgstr "Bu profilin uyumlu olduğu yazıcıları seç."

#: src/slic3r/GUI/Tab.cpp:120 src/libslic3r/PrintConfig.cpp:579
msgid "Compatible print profiles"
msgstr "Uyumlu baskı profilleri"

#: src/slic3r/GUI/Tab.cpp:121
msgid "Select the print profiles this profile is compatible with."
msgstr "Bu profilin uyumlu olduğu baskı profillerini seçin."

#: src/slic3r/GUI/Tab.cpp:216
msgid "Compare this preset with some another"
msgstr ""

#. TRN "Save current Settings"
#: src/slic3r/GUI/Tab.cpp:218
#, c-format, boost-format
msgid "Save current %s"
msgstr "Mevcut %s değerini kaydet"

#: src/slic3r/GUI/Tab.cpp:219
msgid "Delete this preset"
msgstr "Bu hazır ayarı sil"

#: src/slic3r/GUI/Tab.cpp:223
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"Daha fazla bilgi bulmak için imleci düğmelerin üzerine getirin \\ veya bu "
"düğmeye tıklayın."

#: src/slic3r/GUI/Tab.cpp:227
#, boost-format
msgid "Search in settings [%1%]"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1298
msgid "Detach from system preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1311
msgid ""
"A copy of the current system preset will be created, which will be detached "
"from the system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1312
msgid ""
"The current custom preset will be detached from the parent system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1315
msgid "Modifications to the current profile will be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1321
msgid "Detach preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1347
msgid "This is a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1349
msgid "This is a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1351
msgid "Current preset is inherited from the default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1355
msgid "Current preset is inherited from"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1359
msgid "It can't be deleted or modified."
msgstr "Silinemez veya değiştirilemez."

#: src/slic3r/GUI/Tab.cpp:1360
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr ""
"Herhangi bir değişiklik, bundan devralınan yeni bir ön ayar olarak "
"kaydedilmelidir."

#: src/slic3r/GUI/Tab.cpp:1361
msgid "To do that please specify a new name for the preset."
msgstr "Bunu yapmak için lütfen hazır ayar için yeni bir ad belirtin."

#: src/slic3r/GUI/Tab.cpp:1365
msgid "Additional information:"
msgstr "Ek bilgi:"

#: src/slic3r/GUI/Tab.cpp:1371
msgid "printer model"
msgstr "yazıcı modeli"

#: src/slic3r/GUI/Tab.cpp:1379
msgid "default print profile"
msgstr "varsayılan yazdırma profili"

#: src/slic3r/GUI/Tab.cpp:1382
msgid "default filament profile"
msgstr "varsayılan filament profili"

#: src/slic3r/GUI/Tab.cpp:1396
msgid "default SLA material profile"
msgstr "varsayılan SLA malzeme profili"

#: src/slic3r/GUI/Tab.cpp:1400
msgid "default SLA print profile"
msgstr "varsayılan SLA yazdırma profili"

#: src/slic3r/GUI/Tab.cpp:1408
msgid "full profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1409
msgid "symbolic profile name"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1447 src/slic3r/GUI/Tab.cpp:4656
msgid "Layers and perimeters"
msgstr "Katmanlar ve duvarlar"

#: src/slic3r/GUI/Tab.cpp:1453
msgid "Vertical shells"
msgstr "Duvar sayısı"

#: src/slic3r/GUI/Tab.cpp:1465
msgid "Horizontal shells"
msgstr "Yatay katmanlar"

#: src/slic3r/GUI/Tab.cpp:1466 src/libslic3r/PrintConfig.cpp:2385
msgid "Solid layers"
msgstr "Katı katmanlar"

#: src/slic3r/GUI/Tab.cpp:1471
msgid "Minimum shell thickness"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1482
msgid "Quality (slower slicing)"
msgstr "Kalite (daha yavaş dilimleme)"

#: src/slic3r/GUI/Tab.cpp:1497
msgid "Fuzzy skin (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1520
msgid "Reducing printing time"
msgstr "Baskı süresine etki eden ayarlar"

#: src/slic3r/GUI/Tab.cpp:1535 src/libslic3r/ExtrusionEntity.cpp:370
msgid "Skirt"
msgstr "Etek (Skirt)"

#: src/slic3r/GUI/Tab.cpp:1557
msgid "Raft"
msgstr "Alt Destek (Raft)"

#: src/slic3r/GUI/Tab.cpp:1562
msgid "Options for support material and raft"
msgstr "Destek ve alt destek (raft) için seçenekler"

#: src/slic3r/GUI/Tab.cpp:1582
msgid "Speed for print moves"
msgstr "Baskı esnasında kullanılacak hızlar"

#: src/slic3r/GUI/Tab.cpp:1595
msgid "Speed for non-print moves"
msgstr "Baskı haricinde kullanılacak hızlar"

#: src/slic3r/GUI/Tab.cpp:1599
msgid "Modifiers"
msgstr "Düzenleyiciler"

#: src/slic3r/GUI/Tab.cpp:1603
msgid "Acceleration control (advanced)"
msgstr "Hızlanma kontrolü (gelişmiş)"

#: src/slic3r/GUI/Tab.cpp:1611
msgid "Autospeed (advanced)"
msgstr "Otomatik hız (gelişmiş)"

#: src/slic3r/GUI/Tab.cpp:1615
msgid "Pressure equalizer (experimental)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1619
msgid "Multiple Extruders"
msgstr "Çoklu Ekstrüder"

#: src/slic3r/GUI/Tab.cpp:1627
msgid "Ooze prevention"
msgstr "Sızıntı önleme"

#: src/slic3r/GUI/Tab.cpp:1647
msgid "Extrusion width"
msgstr "Ekstrüzyon genişliği"

#: src/slic3r/GUI/Tab.cpp:1657
msgid "Overlap"
msgstr "Üzerine bindirme"

#: src/slic3r/GUI/Tab.cpp:1660
msgid "Flow"
msgstr "Akış"

#: src/slic3r/GUI/Tab.cpp:1671 src/slic3r/GUI/Tab.cpp:1699
msgid "Other"
msgstr "Diğer"

#: src/slic3r/GUI/Tab.cpp:1674
msgid "Arachne perimeter generator"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1684 src/slic3r/GUI/Tab.cpp:4733
msgid "Output options"
msgstr "Çıktı seçenekleri"

#: src/slic3r/GUI/Tab.cpp:1685
msgid "Sequential printing"
msgstr "Sıralı baskı"

#: src/slic3r/GUI/Tab.cpp:1687
msgid "Extruder clearance"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1692 src/slic3r/GUI/Tab.cpp:4734
msgid "Output file"
msgstr "Çıktı dosyası"

#: src/slic3r/GUI/Tab.cpp:1711 src/libslic3r/PrintConfig.cpp:2010
msgid "Post-processing scripts"
msgstr "İşlem sonrası komut dosyaları"

#: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:1724
#: src/slic3r/GUI/Tab.cpp:2109 src/slic3r/GUI/Tab.cpp:2110
#: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2498
#: src/slic3r/GUI/Tab.cpp:2570 src/slic3r/GUI/Tab.cpp:2571
#: src/slic3r/GUI/Tab.cpp:3956 src/slic3r/GUI/Tab.cpp:4584
#: src/slic3r/GUI/Tab.cpp:4585
msgid "Notes"
msgstr "Notlar"

#: src/slic3r/GUI/Tab.cpp:1730 src/slic3r/GUI/Tab.cpp:2117
#: src/slic3r/GUI/Tab.cpp:2504 src/slic3r/GUI/Tab.cpp:2577
#: src/slic3r/GUI/Tab.cpp:4592 src/slic3r/GUI/Tab.cpp:4739
msgid "Dependencies"
msgstr "Bağımlılıklar"

#: src/slic3r/GUI/Tab.cpp:1731 src/slic3r/GUI/Tab.cpp:2118
#: src/slic3r/GUI/Tab.cpp:2505 src/slic3r/GUI/Tab.cpp:2578
#: src/slic3r/GUI/Tab.cpp:4593 src/slic3r/GUI/Tab.cpp:4740
msgid "Profile dependencies"
msgstr "Profil bağımlılıkları"

#: src/slic3r/GUI/Tab.cpp:1770
msgid "Post processing scripts shall modify G-code file in place."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1849
#, c-format, boost-format
msgid ""
"The following line %s contains reserved keywords.\n"
"Please remove it, as it may cause problems in G-code visualization and "
"printing time estimation."
msgid_plural ""
"The following lines %s contain reserved keywords.\n"
"Please remove them, as they may cause problems in G-code visualization and "
"printing time estimation."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:1854
msgid "Found reserved keywords in"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1868
msgid "Filament Overrides"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1991
msgid "Nozzle"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1996
msgid "Bed"
msgstr "Tabla"

#: src/slic3r/GUI/Tab.cpp:2001
msgid "Cooling"
msgstr "Soğutma"

#: src/slic3r/GUI/Tab.cpp:2003 src/libslic3r/PrintConfig.cpp:1912
#: src/libslic3r/PrintConfig.cpp:2962
msgid "Enable"
msgstr "Etkin"

#: src/slic3r/GUI/Tab.cpp:2014
msgid "Fan settings"
msgstr "Fan ayarları"

#: src/slic3r/GUI/Tab.cpp:2025
msgid "Cooling thresholds"
msgstr "Soğutma eşikleri"

#: src/slic3r/GUI/Tab.cpp:2031
msgid "Filament properties"
msgstr "Filament özellikleri"

#: src/slic3r/GUI/Tab.cpp:2038
msgid "Print speed override"
msgstr "Baskı hızı geçersiz kılma"

#: src/slic3r/GUI/Tab.cpp:2048
msgid "Wipe tower parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2051
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""
"Tek ekstrüder Çoklu Filament (MM) yazıcılarla takım değiştirme parametreleri"

#: src/slic3r/GUI/Tab.cpp:2064
msgid "Ramming settings"
msgstr "Sıkıştırma ayarları"

#: src/slic3r/GUI/Tab.cpp:2088 src/slic3r/GUI/Tab.cpp:2409
#: src/slic3r/GUI/Tab.cpp:4263 src/libslic3r/GCode.cpp:733
#: src/libslic3r/PrintConfig.cpp:2468
msgid "Custom G-code"
msgstr "Özel G-code"

#: src/slic3r/GUI/Tab.cpp:2089 src/slic3r/GUI/Tab.cpp:2410
#: src/libslic3r/GCode.cpp:707 src/libslic3r/PrintConfig.cpp:2418
#: src/libslic3r/PrintConfig.cpp:2433
msgid "Start G-code"
msgstr "Başlangıç G-code"

#: src/slic3r/GUI/Tab.cpp:2099 src/slic3r/GUI/Tab.cpp:2420
#: src/libslic3r/GCode.cpp:708 src/libslic3r/PrintConfig.cpp:684
#: src/libslic3r/PrintConfig.cpp:694
msgid "End G-code"
msgstr "Bitiş G-code"

#: src/slic3r/GUI/Tab.cpp:2152
msgid "Volumetric flow hints not available"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2256
msgid ""
"Note: All parameters from this group are moved to the Physical Printer "
"settings (see changelog).\n"
"\n"
"A new Physical Printer profile is created by clicking on the \"cog\" icon "
"right of the Printer profiles combo box, by selecting the \"Add physical "
"printer\" item in the Printer combo box. The Physical Printer profile editor "
"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
"The Physical Printer profiles are being stored into PrusaSlicer/"
"physical_printer directory."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2290 src/slic3r/GUI/Tab.cpp:2517
msgid "Size and coordinates"
msgstr "Boyut ve koordinatlar"

#: src/slic3r/GUI/Tab.cpp:2299 src/slic3r/GUI/UnsavedChangesDialog.cpp:1287
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1674
msgid "Capabilities"
msgstr "Kabiliyetler"

#: src/slic3r/GUI/Tab.cpp:2304
msgid "Number of extruders of the printer."
msgstr "Yazıcının ekstrüder sayısı."

#: src/slic3r/GUI/Tab.cpp:2333
msgid ""
"Single Extruder Multi Material is selected, \n"
"and all extruders must have the same diameter.\n"
"Do you want to change the diameter for all extruders to first extruder "
"nozzle diameter value?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2337 src/slic3r/GUI/Tab.cpp:2781
#: src/libslic3r/PrintConfig.cpp:1876
msgid "Nozzle diameter"
msgstr "Nozül çapı"

#: src/slic3r/GUI/Tab.cpp:2430 src/libslic3r/GCode.cpp:709
#: src/libslic3r/PrintConfig.cpp:424
msgid "Before layer change G-code"
msgstr "Katman değiştirmeden önce G-code"

#: src/slic3r/GUI/Tab.cpp:2440 src/libslic3r/GCode.cpp:710
#: src/libslic3r/PrintConfig.cpp:1602
msgid "After layer change G-code"
msgstr "Katman değişiminden sonra G-code"

#: src/slic3r/GUI/Tab.cpp:2450 src/libslic3r/GCode.cpp:711
#: src/libslic3r/PrintConfig.cpp:2845
msgid "Tool change G-code"
msgstr "Takım değiştirme G kodu"

#: src/slic3r/GUI/Tab.cpp:2460 src/libslic3r/GCode.cpp:712
msgid "Between objects G-code (for sequential printing)"
msgstr "Nesneler arasında Gcode (sıralı baskı için)"

#: src/slic3r/GUI/Tab.cpp:2470 src/libslic3r/GCode.cpp:713
msgid "Color Change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2479 src/libslic3r/GCode.cpp:714
#: src/libslic3r/PrintConfig.cpp:2459
msgid "Pause Print G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2488 src/libslic3r/GCode.cpp:715
msgid "Template Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2524
msgid "Display"
msgstr "Ekran"

#: src/slic3r/GUI/Tab.cpp:2539
msgid "Tilt"
msgstr "Eğim"

#: src/slic3r/GUI/Tab.cpp:2540
msgid "Tilt time"
msgstr "Yatırma zamanı"

#: src/slic3r/GUI/Tab.cpp:2547 src/slic3r/GUI/Tab.cpp:4574
msgid "Corrections"
msgstr "Düzeltmeler"

#: src/slic3r/GUI/Tab.cpp:2560 src/slic3r/GUI/Tab.cpp:4570
msgid "Exposure"
msgstr "Poz"

#: src/slic3r/GUI/Tab.cpp:2621 src/slic3r/GUI/Tab.cpp:2708
#: src/libslic3r/PrintConfig.cpp:1631 src/libslic3r/PrintConfig.cpp:1666
#: src/libslic3r/PrintConfig.cpp:1683 src/libslic3r/PrintConfig.cpp:1700
#: src/libslic3r/PrintConfig.cpp:1716 src/libslic3r/PrintConfig.cpp:1726
#: src/libslic3r/PrintConfig.cpp:1736 src/libslic3r/PrintConfig.cpp:1749
#: src/libslic3r/PrintConfig.cpp:1759
msgid "Machine limits"
msgstr "Makine sınırları"

#: src/slic3r/GUI/Tab.cpp:2644
msgid "Values in this column are for Normal mode"
msgstr "Bu sütundaki değerler Normal mod içindir"

#: src/slic3r/GUI/Tab.cpp:2650
msgid "Values in this column are for Stealth mode"
msgstr "Bu sütundaki değerler Gizli mod içindir"

#: src/slic3r/GUI/Tab.cpp:2659
msgid "Maximum feedrates"
msgstr "En yüksek hızlar"

#: src/slic3r/GUI/Tab.cpp:2664
msgid "Maximum accelerations"
msgstr "En yüksek ivme (Acceleration)"

#: src/slic3r/GUI/Tab.cpp:2673
msgid "Jerk limits"
msgstr "Ani Hareket (Jerk) sınırları"

#: src/slic3r/GUI/Tab.cpp:2679
msgid "Minimum feedrates"
msgstr "En düşük besleme hızı"

#: src/slic3r/GUI/Tab.cpp:2733 src/slic3r/GUI/Tab.cpp:2742
msgid "Single extruder MM setup"
msgstr "Tek ekstrüder çoklu filament kurulumu"

#: src/slic3r/GUI/Tab.cpp:2743
msgid "Single extruder multimaterial parameters"
msgstr "Tek ekstrüder çok yönlü parametreler"

#: src/slic3r/GUI/Tab.cpp:2778
msgid ""
"This is a single extruder multimaterial printer, diameters of all extruders "
"will be set to the new value. Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2803
msgid "Layer height limits"
msgstr "Katman yüksekliği sınırları"

#: src/slic3r/GUI/Tab.cpp:2808
msgid "Position (for multi-extruder printers)"
msgstr "Konum (çoklu ekstrüder yazıcıları için)"

#: src/slic3r/GUI/Tab.cpp:2814
msgid "Only lift Z"
msgstr "Koşullu Z kaldırma"

#: src/slic3r/GUI/Tab.cpp:2827
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""
"Takım devre dışı bırakıldığında geri çekme (çoklu ekstrüder ayarları için "
"gelişmiş ayarlar)"

#: src/slic3r/GUI/Tab.cpp:2834
msgid "Reset to Filament Color"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3011
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"Donanımsal Geri Çekme kullanırken Temizleme seçeneği kullanılamaz.\n"
"\n"
"Donanımsal Geri Çekmeyi etkinleştirmek için Temizleme seçeneğini kapatmamı "
"iste misiniz?"

#: src/slic3r/GUI/Tab.cpp:3013
msgid "Firmware Retraction"
msgstr "Firmware Retraction"

#: src/slic3r/GUI/Tab.cpp:3318
msgid "New printer preset selected"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3624
msgid "Detached"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3701
msgid "remove"
msgstr "kaldır"

#: src/slic3r/GUI/Tab.cpp:3701
msgid "delete"
msgstr "sil"

#: src/slic3r/GUI/Tab.cpp:3710
msgid "It's a last preset for this physical printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3715
#, boost-format
msgid ""
"Are you sure you want to delete \"%1%\" preset from the physical printer "
"\"%2%\"?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3727
msgid ""
"The physical printer below is based on the preset, you are going to delete."
msgid_plural ""
"The physical printers below are based on the preset, you are going to delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3732
msgid "Note, that the selected preset will be deleted from this printer too."
msgid_plural ""
"Note, that the selected preset will be deleted from these printers too."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3737
msgid ""
"The physical printer below is based only on the preset, you are going to "
"delete."
msgid_plural ""
"The physical printers below are based only on the preset, you are going to "
"delete."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3742
msgid ""
"Note, that this printer will be deleted after deleting the selected preset."
msgid_plural ""
"Note, that these printers will be deleted after deleting the selected preset."
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/Tab.cpp:3747
#, boost-format
msgid "Are you sure you want to %1% the selected preset?"
msgstr "%1% ayarını seçili ön ayar yapmak istediğinizden emin misiniz?"

#. TRN  Remove/Delete
#: src/slic3r/GUI/Tab.cpp:3752
#, boost-format
msgid "%1% Preset"
msgstr "%1% Ön Ayar"

#: src/slic3r/GUI/Tab.cpp:3835 src/slic3r/GUI/Tab.cpp:4197
msgid "Set"
msgstr "Ayarla"

#: src/slic3r/GUI/Tab.cpp:3954
msgid "Find"
msgstr "Bul"

#: src/slic3r/GUI/Tab.cpp:3955
msgid "Replace with"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4044
msgid "Regular expression"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4048
msgid "Case insensitive"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4052
msgid "Whole word"
msgstr "Tam kelime"

#: src/slic3r/GUI/Tab.cpp:4056
msgid "Match single line"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4159
msgid "Are you sure you want to delete all substitutions?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4291
msgid ""
"Machine limits will be emitted to G-code and used to estimate print time."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4294
msgid ""
"Machine limits will NOT be emitted to G-code, however they will be used to "
"estimate print time, which may therefore not be accurate as the printer may "
"apply a different set of machine limits."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4298
msgid ""
"Machine limits are not set, therefore the print time estimate may not be "
"accurate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4320
msgid "LOCKED LOCK"
msgstr "KAPALI KİLİT"

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4322
msgid ""
"indicates that the settings are the same as the system (or default) values "
"for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4324
msgid "UNLOCKED LOCK"
msgstr "AÇIK KİLİT"

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:4326
msgid ""
"indicates that some settings were changed and are not equal to the system "
"(or default) values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system (or default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4331
msgid "WHITE BULLET"
msgstr "BEYAZ NOKTA"

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:4333
msgid ""
"for the left button: indicates a non-system (or non-default) preset,\n"
"for the right button: indicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4336
msgid "BACK ARROW"
msgstr "GERİ OK"

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:4338
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"ayarların değiştirildiğini ve mevcut seçenek grubunun son kaydedilen ön "
"ayarına eşit olmadığını gösterir.\n"
"Geçerli seçenek grubunun tüm ayarlarını en son kaydedilen ön ayara "
"sıfırlamak için GERİ OK tuşuna basın."

#: src/slic3r/GUI/Tab.cpp:4348
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system (or "
"default) values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4350
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system (or default) values for the current option group.\n"
"Click to reset all settings for current option group to the system (or "
"default) values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4353
msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4356
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""
"BEYAZ NOKTA simgesi ayarların geçerli seçenek grubu için en son kaydedilen "
"ön ayardakiyle aynı olduğunu gösterir."

#: src/slic3r/GUI/Tab.cpp:4358
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"GERİ OK simgesi ayarların değiştirildiğini ve geçerli seçenek grubunun son "
"kaydedilen ön ayarına eşit olmadığını gösterir.\n"
"Geçerli seçenek grubunun tüm ayarlarını en son kaydedilen ön ayara "
"sıfırlamak için tıklayın."

#: src/slic3r/GUI/Tab.cpp:4364
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system (or "
"default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4365
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system (or default) value.\n"
"Click to reset current value to the system (or default) value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4371
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""
"BEYAZ NOKTA simgesi, değerin son kaydedilen ön ayardakiyle aynı olduğunu "
"gösterir."

#: src/slic3r/GUI/Tab.cpp:4372
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"GERİ OK simgesi, değerin değiştirildiğini ve en son kaydedilen ön ayara eşit "
"olmadığını gösterir.\n"
"Geçerli değeri son kaydedilen ön ayara sıfırlamak için tıklayın."

#: src/slic3r/GUI/Tab.cpp:4526 src/slic3r/GUI/Tab.cpp:4528
msgid "Material"
msgstr "Malzeme"

#: src/slic3r/GUI/Tab.cpp:4613 src/slic3r/GUI/Tab.cpp:4614
msgid "Material printing profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4666
msgid "Support head"
msgstr "Destek kafa"

#: src/slic3r/GUI/Tab.cpp:4671
msgid "Support pillar"
msgstr "Destek ayağı"

#: src/slic3r/GUI/Tab.cpp:4694
msgid "Connection of the support sticks and junctions"
msgstr "Destek çubuklarının ve birleşimlerinin bağlantısı"

#: src/slic3r/GUI/Tab.cpp:4699
msgid "Automatic generation"
msgstr "Otomatik oluşturma"

#: src/slic3r/GUI/Tab.cpp:4774
#, boost-format
msgid ""
"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
"To enable \"%1%\", please switch off \"%2%\""
msgstr ""

#: src/slic3r/GUI/Tab.cpp:4776 src/libslic3r/PrintConfig.cpp:3719
msgid "Object elevation"
msgstr "Nesne yüksekliği"

#: src/slic3r/GUI/Tab.cpp:4776 src/libslic3r/PrintConfig.cpp:3821
msgid "Pad around object"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
msgid "Undef"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
msgid "Unsaved Changes"
msgstr "Kaydedilmemiş Değişiklikler"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
msgid "Switching Presets: Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
msgid "Old Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
msgid "New Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
msgid "Keep"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
msgid "Transfer"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
msgid "Don't save"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
msgid "Discard"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
msgid "Save"
msgstr "Kaydet"

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"create new project"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
msgid ""
"You will not be asked about the unsaved changes in presets the next time you "
"switch a preset"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
msgid ""
"You will not be asked about the unsaved changes in presets the next time "
"you: \n"
"- Closing PrusaSlicer while some presets are modified,\n"
"- Loading a new project while some presets are modified"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
msgid "PrusaSlicer will remember your action."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
#, boost-format
msgid ""
"Visit \"Preferences\" and check \"%1%\"\n"
"to be asked about unsaved changes again."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1696
msgid ""
"Some fields are too long to fit. Right mouse click reveals the full text."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
msgid "All settings changes will not be saved"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
msgid "All settings changes will be discarded."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
msgid "Save the selected options."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
msgid "Keep the selected settings."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
msgid "Transfer the selected settings to the newly selected preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
#, boost-format
msgid "Save the selected options to preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
#, boost-format
msgid "Transfer the selected options to the newly selected preset \"%1%\"."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
msgid "The following preset was modified"
msgid_plural "The following presets were modified"
msgstr[0] ""
msgstr[1] ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
#, boost-format
msgid "Preset \"%1%\" has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new printer profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
#, boost-format
msgid ""
"Preset \"%1%\" is not compatible with the new print profile and it has the "
"following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1670
msgid "Extruders count"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1453
msgid "Select presets to compare"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1502
msgid "Show all presets (including incompatible)"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
msgid "Left Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
msgid "Right Preset Value"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1627
msgid "One of the presets doesn't found"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1638
msgid "Compared presets has different printer technology"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1652
msgid "Presets are the same"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1660
msgid ""
"Presets are different.\n"
"Click this button to select the same preset for the right and left preset."
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1684
msgid "Undef category"
msgstr ""

#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1684
msgid "Undef group"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:37
msgid "Update available"
msgstr "Güncelleme uygun"

#: src/slic3r/GUI/UpdateDialogs.cpp:37
#, c-format, boost-format
msgid "New version of %s is available"
msgstr "%s yeni sürümü mevcut"

#: src/slic3r/GUI/UpdateDialogs.cpp:42
msgid "Current version:"
msgstr "Mevcut sürüm:"

#: src/slic3r/GUI/UpdateDialogs.cpp:44
msgid "New version:"
msgstr "Yeni sürüm:"

#: src/slic3r/GUI/UpdateDialogs.cpp:52
msgid "Changelog & Download"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:59 src/slic3r/GUI/UpdateDialogs.cpp:133
#: src/slic3r/GUI/UpdateDialogs.cpp:191
msgid "Open changelog page"
msgstr "Değişiklik sayfasını aç"

#: src/slic3r/GUI/UpdateDialogs.cpp:65
msgid "Open download page"
msgstr "İndirme sayfasını aç"

#: src/slic3r/GUI/UpdateDialogs.cpp:72
msgid "Don't notify about new releases any more"
msgstr "Artık yeni sürümlerden haberdar etme"

#: src/slic3r/GUI/UpdateDialogs.cpp:94
msgid "Opening Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:94 src/slic3r/GUI/UpdateDialogs.cpp:261
msgid "Configuration update"
msgstr "Yapılandırma güncelleme"

#: src/slic3r/GUI/UpdateDialogs.cpp:95
msgid ""
"PrusaSlicer is not using the newest configuration available.\n"
"Configuration Wizard may not offer the latest printers, filaments and SLA "
"materials to be installed."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:97
msgid "Configuration update is available"
msgstr "Yapılandırma güncellemesi var"

#: src/slic3r/GUI/UpdateDialogs.cpp:100
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"Yüklemek ister misiniz?\n"
"\n"
"Önce tam bir yapılandırma görüntüsünün oluşturulacağını unutmayın. Yeni "
"sürümde bir sorun olması durumunda herhangi bir zamanda geri yüklenebilir.\n"
"\n"
"Güncelleme yapılandırma paketleri:"

#: src/slic3r/GUI/UpdateDialogs.cpp:121 src/slic3r/GUI/UpdateDialogs.cpp:181
msgid "Comment:"
msgstr "Yorum:"

#: src/slic3r/GUI/UpdateDialogs.cpp:142
msgid "Install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:144
msgid "Don't install"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:157 src/slic3r/GUI/UpdateDialogs.cpp:212
#, c-format, boost-format
msgid "%s incompatibility"
msgstr "%s uyumsuzluğu"

#: src/slic3r/GUI/UpdateDialogs.cpp:157
msgid "You must install a configuration update."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:160
#, c-format, boost-format
msgid ""
"%s will now start updates. Otherwise it won't be able to start.\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:200 src/slic3r/GUI/UpdateDialogs.cpp:247
#, c-format, boost-format
msgid "Exit %s"
msgstr "%s Çıkış"

#: src/slic3r/GUI/UpdateDialogs.cpp:213
#, c-format, boost-format
msgid "%s configuration is incompatible"
msgstr "%s yapılandırması uyumlu değil"

#: src/slic3r/GUI/UpdateDialogs.cpp:216
#, c-format, boost-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:225
#, c-format, boost-format
msgid "This %s version: %s"
msgstr "Bu %s versiyonu: %s"

#: src/slic3r/GUI/UpdateDialogs.cpp:230
msgid "Incompatible bundles:"
msgstr "Uyumsuz paketler:"

#: src/slic3r/GUI/UpdateDialogs.cpp:246
msgid "Re-configure"
msgstr "Yeniden yapılandır"

#: src/slic3r/GUI/UpdateDialogs.cpp:265
#, c-format, boost-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"%s şimdi güncellenmiş bir konfigürasyon yapısı kullanıyor.\n"
"\n"
"Çeşitli yazıcılar için yerleşik varsayılan ayarları tutan 'Sistem ön "
"ayarları' adı verilen bir sistem tanıtıldı. Bu Sistem ön ayarları "
"değiştirilemez, bunun yerine, kullanıcılar artık Sistem ön ayarlarından "
"birinden ayarları devralarak kendi ön ayarlarını oluşturabilir.\n"
"Bir ön ayarın devralınması, üst öğesinden belirli bir değeri devralabilir "
"veya özelleştirilmiş bir değerle geçersiz kılabilir.\n"
"\n"
"Lütfen yeni hazır ayarları ayarlamak ve otomatik hazır ayar "
"güncellemelerinin etkinleştirilip etkinleştirilmeyeceğini seçmek için %s ile "
"devam edin."

#: src/slic3r/GUI/UpdateDialogs.cpp:282
msgid "For more information please visit our wiki page:"
msgstr "Daha fazla bilgi için lütfen wiki sayfamızı ziyaret edin:"

#: src/slic3r/GUI/UpdateDialogs.cpp:299
msgid "Configuration updates"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:299
msgid "No updates available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:304
#, c-format, boost-format
msgid "%s has no configuration updates available."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:21
msgid "Ramming customization"
msgstr "Sıkıştırma özelleştirme"

#: src/slic3r/GUI/WipeTowerDialog.cpp:54
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"Sıkıştırma, tek bir ekstrüder ile çoklu filament kullanan yazıcıda bir "
"filament değişikliğinden hemen önce hızlı ekstrüzyon işlemidir. Amacı, "
"boşaltılmamış filamentin sonunu düzgün bir şekilde biçimlendirmektir, "
"böylece yeni filamentin yerleştirilmesini engellemez ve daha sonra yeniden "
"yerleştirilebilir. Bu işlem önemlidir ve farklı malzemeler iyi bir şekil "
"elde etmek için farklı ekstrüzyon hızları gerektirebilir. Bu nedenle, "
"sıkıştırma sırasında ekstrüzyon hızları ayarlanabilir.\n"
"\n"
"Bu uzman düzeyinde bir ayardır, yanlış ayarlamalar sıkışmalara, ekstrüder "
"çarkının filamenti taşlanmasına vb. sebep olabilir."

#: src/slic3r/GUI/WipeTowerDialog.cpp:114
msgid "Total ramming time"
msgstr "Toplam sıkıştırma süresi"

#: src/slic3r/GUI/WipeTowerDialog.cpp:116
msgid "Total rammed volume"
msgstr "Toplam sıkıştırma hacmi"

#: src/slic3r/GUI/WipeTowerDialog.cpp:120
msgid "Ramming line width"
msgstr "Sıkıştırma genişliği"

#: src/slic3r/GUI/WipeTowerDialog.cpp:122
msgid "Ramming line spacing"
msgstr "Sıkıştırma satır boşluğu"

#: src/slic3r/GUI/WipeTowerDialog.cpp:173
msgid "Wipe tower - Purging volume adjustment"
msgstr "Temizleme kulesi - Boşaltma hacmi ayarı"

#: src/slic3r/GUI/WipeTowerDialog.cpp:299
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""
"Burada, herhangi bir takım çifti için gerekli temizleme hacmini (mm³) "
"ayarlayabilirsiniz."

#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "Extruder changed to"
msgstr "Ekstrüder şuna değiştirildi"

#: src/slic3r/GUI/WipeTowerDialog.cpp:308
msgid "unloaded"
msgstr "kaldırıldı"

#: src/slic3r/GUI/WipeTowerDialog.cpp:309
msgid "loaded"
msgstr "yüklü"

#: src/slic3r/GUI/WipeTowerDialog.cpp:352
msgid "Tool #"
msgstr "Araç #"

#: src/slic3r/GUI/WipeTowerDialog.cpp:361
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""
"Toplam temizleme hacmi, hangi araçların yüklü / boşaltıldığına bağlı olarak "
"aşağıdaki iki değer toplanarak hesaplanır."

#: src/slic3r/GUI/WipeTowerDialog.cpp:362
msgid "Volume to purge (mm³) when the filament is being"
msgstr "Filament olurken temizlenecek hacim (mm³)"

#: src/slic3r/GUI/WipeTowerDialog.cpp:376
msgid "From"
msgstr "From"

#: src/slic3r/GUI/WipeTowerDialog.cpp:442
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"Basit ayarlara geçmek, gelişmiş modda yapılan değişiklikleri iptal eder! \n"
"\n"
"Devam etmek ister misiniz?"

#: src/slic3r/GUI/WipeTowerDialog.cpp:454
msgid "Show simplified settings"
msgstr "Basitleştirilmiş ayarları göster"

#: src/slic3r/GUI/WipeTowerDialog.cpp:454
msgid "Show advanced settings"
msgstr "Gelişmiş ayarları göster"

#: src/slic3r/GUI/wxExtensions.cpp:644
#, c-format, boost-format
msgid "Switch to the %s mode"
msgstr "%s moda geç"

#: src/slic3r/GUI/wxExtensions.cpp:645
#, c-format, boost-format
msgid "Current mode is %s"
msgstr "Geçerli mod %s"

#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:141
#: src/slic3r/Utils/Repetier.cpp:69
#, c-format, boost-format
msgid "Mismatched type of print host: %s"
msgstr "Eşleşmeyen baskı sunucusu türü: %s"

#: src/slic3r/Utils/AstroBox.cpp:84
msgid "Connection to AstroBox works correctly."
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:90
msgid "Could not connect to AstroBox"
msgstr ""

#: src/slic3r/Utils/AstroBox.cpp:92
msgid "Note: AstroBox version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr "Duet ile bağlantı düzgün çalışıyor."

#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr "Duet ile bağlantı kurulamadı"

#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:157
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr "Bilinmeyen bir hata oluştu"

#: src/slic3r/Utils/Duet.cpp:151
msgid "Wrong password"
msgstr "Yanlış şifre"

#: src/slic3r/Utils/Duet.cpp:154
msgid "Could not get resources to create a new connection"
msgstr "Yeni bir bağlantı oluşturmak için kaynaklar alınamadı"

#: src/slic3r/Utils/FixModelByWin10.cpp:221
#: src/slic3r/Utils/FixModelByWin10.cpp:361
msgid "Exporting source model"
msgstr "Kaynak model dışa aktarılıyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:237
msgid "Failed loading the input model."
msgstr "Giriş modeli yüklenemedi."

#: src/slic3r/Utils/FixModelByWin10.cpp:244
msgid "Repairing model by the Netfabb service"
msgstr "Netfabb servisi tarafından tamir modeli"

#: src/slic3r/Utils/FixModelByWin10.cpp:250
msgid "Mesh repair failed."
msgstr "Ağ onarımı başarısız oldu."

#: src/slic3r/Utils/FixModelByWin10.cpp:253
#: src/slic3r/Utils/FixModelByWin10.cpp:388
msgid "Loading repaired model"
msgstr "Onarılan model yükleniyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:265
#: src/slic3r/Utils/FixModelByWin10.cpp:272
#: src/slic3r/Utils/FixModelByWin10.cpp:303
msgid "Saving mesh into the 3MF container failed."
msgstr "3MF kabına ağ kaydetme işlemi başarısız oldu."

#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Export of a temporary 3mf file failed"
msgstr "Geçici 3MF dosyasına dışa aktarım başarısız oldu"

#: src/slic3r/Utils/FixModelByWin10.cpp:394
msgid "Import of the repaired 3mf file failed"
msgstr "Onarılmış 3mf dosyasının içe aktarılması başarısız oldu"

#: src/slic3r/Utils/FixModelByWin10.cpp:396
msgid "Repaired 3MF file does not contain any object"
msgstr "Onarılmış 3MF dosyası herhangi bir nesne içermiyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:398
msgid "Repaired 3MF file contains more than one object"
msgstr "Onarılmış 3MF dosyası birden fazla nesne içeriyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Repaired 3MF file does not contain any volume"
msgstr "Onarılmış 3MF dosyası herhangi bir birim içermiyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:402
msgid "Repaired 3MF file contains more than one volume"
msgstr "Onarılmış 3MF dosyası birden fazla cilt içeriyor"

#: src/slic3r/Utils/FixModelByWin10.cpp:412
msgid "Model repair finished"
msgstr "Model onarımı bitti"

#: src/slic3r/Utils/FixModelByWin10.cpp:418
msgid "Model repair canceled"
msgstr "Model onarımı iptal edildi"

#: src/slic3r/Utils/FlashAir.cpp:58
msgid "Upload not enabled on FlashAir card."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:68
msgid "Connection to FlashAir works correctly and upload is enabled."
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:74
msgid "Could not connect to FlashAir"
msgstr ""

#: src/slic3r/Utils/FlashAir.cpp:76
msgid ""
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
"is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:164
msgid "Connection to OctoPrint works correctly."
msgstr "OctoPrint ile bağlantı düzgün çalışıyor."

#: src/slic3r/Utils/OctoPrint.cpp:170
msgid "Could not connect to OctoPrint"
msgstr "OctoPrint ile bağlantı kurulamadı"

#: src/slic3r/Utils/OctoPrint.cpp:172
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "Not: OctoPrint sürümü en az 1.1.0 gereklidir."

#: src/slic3r/Utils/OctoPrint.cpp:292
msgid "Connection to Prusa SL1 / SL1S works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:298
msgid "Could not connect to Prusa SLA"
msgstr "Prusa SLA ile bağlantı kurulamadı"

#: src/slic3r/Utils/OctoPrint.cpp:336
msgid "Connection to PrusaLink works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:342
msgid "Could not connect to PrusaLink"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:61
#, boost-format
msgid "Copying of file %1% to %2% failed: %3%"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:645
#: src/slic3r/Utils/PresetUpdater.cpp:662
msgid "Continue and install configuration updates?"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:777
msgid ""
"Configuration Updates causes a lost of preset modification.\n"
"So, check unsaved changes and save them if necessary."
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:779
msgid "Updating"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:808
#, c-format, boost-format
msgid "requires min. %s and max. %s"
msgstr "en az %s ve en çok %s gerektirir"

#: src/slic3r/Utils/PresetUpdater.cpp:812
#, c-format, boost-format
msgid "requires min. %s"
msgstr "en az %s gerektirir"

#: src/slic3r/Utils/PresetUpdater.cpp:815
#, c-format, boost-format
msgid "requires max. %s"
msgstr "en çok %s gerektirir"

#: src/slic3r/Utils/Http.cpp:73
msgid ""
"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
"establish secure network connections."
msgstr ""

#: src/slic3r/Utils/Http.cpp:78
#, boost-format
msgid "PrusaSlicer detected system SSL certificate store in: %1%"
msgstr ""

#: src/slic3r/Utils/Http.cpp:82
#, boost-format
msgid ""
"To specify the system certificate store manually, please set the %1% "
"environment variable to the correct CA bundle and restart the application."
msgstr ""

#: src/slic3r/Utils/Http.cpp:91
msgid ""
"CURL init has failed. PrusaSlicer will be unable to establish network "
"connections. See logs for additional details."
msgstr ""

#: src/slic3r/Utils/Process.cpp:157
msgid "Open G-code file:"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:84
msgid "Connection to Repetier works correctly."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:90
msgid "Could not connect to Repetier"
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:92
msgid "Note: Repetier version at least 0.90.0 is required."
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:246
#, boost-format
msgid ""
"HTTP status: %1%\n"
"Message body: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:253
#, boost-format
msgid ""
"Parsing of host response failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Utils/Repetier.cpp:266
#, boost-format
msgid ""
"Enumeration of host printers failed.\n"
"Message body: \"%1%\"\n"
"Error: \"%2%\""
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:584
msgid "Taking a configuration snapshot failed."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:598
msgid ""
"PrusaSlicer has encountered an error while taking a configuration snapshot."
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:599
msgid "PrusaSlicer error"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Continue"
msgstr ""

#: src/slic3r/Config/Snapshot.cpp:601
msgid "Abort"
msgstr ""

#: src/libslic3r/GCode.cpp:539
msgid "There is an object with no extrusions in the first layer."
msgstr ""

#: src/libslic3r/GCode.cpp:570
#, boost-format
msgid "Empty layer between %1% and %2%."
msgstr ""

#: src/libslic3r/GCode.cpp:573
msgid "(Some lines not shown)"
msgstr ""

#: src/libslic3r/GCode.cpp:575
#, boost-format
msgid "Object name: %1%"
msgstr ""

#: src/libslic3r/GCode.cpp:576
msgid ""
"Make sure the object is printable. This is usually caused by negligibly "
"small extrusions or by a faulty model. Try to repair the model or change its "
"orientation on the bed."
msgstr ""

#: src/libslic3r/GCode.cpp:718
msgid "Filament Start G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:725
msgid "Filament End G-code"
msgstr ""

#: src/libslic3r/GCode.cpp:764
msgid "In the custom G-code were found reserved keywords:"
msgstr ""

#: src/libslic3r/GCode.cpp:766
msgid ""
"This may cause problems in g-code visualization and printing time estimation."
msgstr ""

#: src/libslic3r/GCode.cpp:1200 src/libslic3r/GCode.cpp:1211
msgid "No extrusions were generated for objects."
msgstr ""

#: src/libslic3r/GCode.cpp:1406
msgid ""
"Your print is very close to the priming regions. Make sure there is no "
"collision."
msgstr ""

#: src/libslic3r/ExtrusionEntity.cpp:344 src/libslic3r/ExtrusionEntity.cpp:380
msgid "Mixed"
msgstr "Karışık"

#: src/libslic3r/Flow.cpp:61
#, boost-format
msgid ""
"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1734
#, boost-format
msgid ""
"The selected 3mf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1745
msgid ""
"The selected 3MF contains FDM supports painted object using a newer version "
"of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1749
msgid ""
"The selected 3MF contains seam painted object using a newer version of "
"PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/3mf.cpp:1753
msgid ""
"The selected 3MF contains multi-material painted object using a newer "
"version of PrusaSlicer and is not compatible."
msgstr ""

#: src/libslic3r/Format/AMF.cpp:993
#, boost-format
msgid ""
"The selected amf file has been saved with a newer version of %1% and is not "
"compatible."
msgstr ""

#: src/libslic3r/GCode/PostProcessor.cpp:289
#, boost-format
msgid ""
"Post-processing script %1% failed.\n"
"\n"
"The post-processing script is expected to change the G-code file %2% in "
"place, but the G-code file was deleted and likely saved under a new name.\n"
"Please adjust the post-processing script to change the G-code in place and "
"consult the manual on how to optionally rename the post-processed G-code "
"file.\n"
msgstr ""

#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr "tanımsız hata"

#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr "çok fazla dosya"

#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr "dosya çok büyük"

#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr "desteklenmeyen yöntem"

#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr "desteklenmeyen şifreleme"

#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr "desteklenmeyen özellik"

#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr "merkez dizini bulamadı"

#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr "dosya ZIP değil"

#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr "geçersiz başlık veya arşiv bozuk"

#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr "desteklenmeyen multidisk arşivi"

#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr "açma işlemi başarısız oldu veya arşiv bozuk"

#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr "sıkıştırma başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr "beklenmeyen sıkıştırılmış boyut"

#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr "CRC-32 kontrolü başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr "desteklenmeyen merkezi dizin boyutu"

#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr "tahsis başarısız"

#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr "dosya açılamadı"

#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr "dosya oluşturma başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr "dosya yazımı başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr "dosya okunamadı"

#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr "dosya kapatılamadı"

#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr "dosya arama başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr "dosya statüsü başarısız oldu"

#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr "geçersiz parametre"

#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr "geçersiz dosya adı"

#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr "arabellek çok küçük"

#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr "iç hata"

#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr "dosya bulunamadı"

#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr "arşiv çok büyük"

#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr "doğrulama başarısız"

#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr "geri arama yazma başarısız oldu"

#: src/libslic3r/Print.cpp:451
msgid "All objects are outside of the print volume."
msgstr "Tüm nesneler baskı hacminin dışında."

#: src/libslic3r/Print.cpp:454
msgid "The supplied settings will cause an empty print."
msgstr "Verilen ayarlar boş yazdırmaya neden olur."

#: src/libslic3r/Print.cpp:458
msgid "Some objects are too close; your extruder will collide with them."
msgstr "Bazı nesneler çok yakın; Ekstrüderiniz onlarla çarpışacaktır."

#: src/libslic3r/Print.cpp:460
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr "Bazı nesneler çok uzun ve ekstrüder çarpışmaları olmadan basılamaz."

#: src/libslic3r/Print.cpp:469
msgid ""
"Only a single object may be printed at a time in Spiral Vase mode. Either "
"remove all but the last object, or enable sequential mode by "
"\"complete_objects\"."
msgstr ""

#: src/libslic3r/Print.cpp:473
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""
"Spiral Vazo seçeneği, yalnızca tek malzeme nesnelerini yazdırırken "
"kullanılabilir."

#: src/libslic3r/Print.cpp:486
msgid ""
"The wipe tower is only supported if all extruders have the same nozzle "
"diameter and use filaments of the same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:492
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
"RepRapFirmware and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:494
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""
"Temizleme Kulesi şu anda yalnızca göreceli ekstrüder adreslemesi ile "
"desteklenmektedir (use_relative_e_distances = 1)."

#: src/libslic3r/Print.cpp:496
msgid "Ooze prevention is currently not supported with the wipe tower enabled."
msgstr ""

#: src/libslic3r/Print.cpp:498
msgid ""
"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
msgstr ""

#: src/libslic3r/Print.cpp:500
msgid ""
"The Wipe Tower is currently not supported for multimaterial sequential "
"prints."
msgstr ""

#: src/libslic3r/Print.cpp:521
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""
"Temizleme Kulesi, yalnızca eşit katman yüksekliğine sahipse birden çok nesne "
"için desteklenir"

#: src/libslic3r/Print.cpp:523
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""
"Temizleme Kulesi, yalnızca eşit sayıda sal katmanın üzerine basıldıysa, "
"yalnızca birden çok nesne için desteklenir"

#: src/libslic3r/Print.cpp:526
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"Temizleme Kulesi, yalnızca aynı support_material_contact_distance ile "
"yazdırılıyorsa, birden çok nesne için desteklenir"

#: src/libslic3r/Print.cpp:528
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""
"Temizleme Kulesi, yalnızca eşit şekilde dilimlenmeleri durumunda birden çok "
"nesne için desteklenir."

#: src/libslic3r/Print.cpp:552
msgid ""
"The Wipe tower is only supported if all objects have the same variable layer "
"height"
msgstr ""

#: src/libslic3r/Print.cpp:576
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""
"Bir veya daha fazla nesneye, yazıcının sahip olmadığı bir ekstrüder "
"verilmiştir."

#: src/libslic3r/Print.cpp:589
#, boost-format
msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:592
#, boost-format
msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
msgstr ""

#: src/libslic3r/Print.cpp:603
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"Farklı nozül çaplarına sahip birden fazla ekstrüder ile baskı. Destek mevcut "
"ekstrüder ile basılacaksa (support_material_ekstrüder == 0 veya "
"support_material_interface_ekstrüder == 0), tüm nozullar aynı çapta "
"olmalıdır."

#: src/libslic3r/Print.cpp:611
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""
"Temizleme Kulesi'nin çözülebilir desteklerle çalışması için, destek "
"katmanlarının nesne katmanları ile senkronize edilmesi gerekir."

#: src/libslic3r/Print.cpp:615
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"Temizleme Kulesi şu anda çözülemeyen destekleri sadece bir takım "
"değişikliğini tetiklemeden mevcut ekstrüder ile basıldıysa desteklemektedir. "
"(Hem support_material_ekstrüder hem de support_material_interface_ekstrüder "
"0 olarak ayarlanmalıdır)."

#: src/libslic3r/Print.cpp:651
msgid "First layer height can't be greater than nozzle diameter"
msgstr "İlk katman yüksekliği nozül çapından büyük olamaz"

#: src/libslic3r/Print.cpp:656
msgid "Layer height can't be greater than nozzle diameter"
msgstr "Katman yüksekliği nozül çapından büyük olamaz"

#: src/libslic3r/Print.cpp:677
msgid ""
"Relative extruder addressing requires resetting the extruder position at "
"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
"layer_gcode."
msgstr ""

#: src/libslic3r/Print.cpp:679
msgid ""
"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
"absolute extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:681
msgid ""
"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
"extruder addressing."
msgstr ""

#: src/libslic3r/Print.cpp:823
msgid "Infilling layers"
msgstr "Dolgu katmanları"

#: src/libslic3r/Print.cpp:845
msgid "Generating skirt and brim"
msgstr ""

#: src/libslic3r/Print.cpp:893
msgid "Exporting G-code"
msgstr "G-code dışa aktarılıyor"

#: src/libslic3r/Print.cpp:897
msgid "Generating G-code"
msgstr "G kodu oluşturma"

#: src/libslic3r/SLA/Pad.cpp:533
msgid "Pad brim size is too small for the current configuration."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:628
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""
"Destek noktaları olmadan devam edemezsiniz! Destek noktaları ekleyin veya "
"destek oluşturmayı devre dışı bırakın."

#: src/libslic3r/SLAPrint.cpp:640
msgid ""
"Elevation is too low for object. Use the \"Pad around object\" feature to "
"print the object without elevation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:646
msgid ""
"The endings of the support pillars will be deployed on the gap between the "
"object and the pad. 'Support base safety distance' has to be greater than "
"the 'Pad object gap' parameter to avoid this."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:661
msgid "Exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:668
msgid "Initial exposition time is out of printer profile bounds."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:784
msgid "Slicing done"
msgstr "Dilimleme yapıldı"

#: src/libslic3r/SLAPrintSteps.cpp:47
msgid "Hollowing model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:48
msgid "Drilling holes into model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:49
msgid "Slicing model"
msgstr "Dilimleme modeli"

#: src/libslic3r/SLAPrintSteps.cpp:50 src/libslic3r/SLAPrintSteps.cpp:639
msgid "Generating support points"
msgstr "Destek noktaları oluşturmak"

#: src/libslic3r/SLAPrintSteps.cpp:51
msgid "Generating support tree"
msgstr "Destek ağacı oluşturma"

#: src/libslic3r/SLAPrintSteps.cpp:52
msgid "Generating pad"
msgstr "Üreten ped"

#: src/libslic3r/SLAPrintSteps.cpp:53
msgid "Slicing supports"
msgstr "Dilimleme destekleri"

#: src/libslic3r/SLAPrintSteps.cpp:68
msgid "Merging slices and calculating statistics"
msgstr "Dilimleri birleştirme ve istatistik hesaplama"

#: src/libslic3r/SLAPrintSteps.cpp:69
msgid "Rasterizing layers"
msgstr "Rasterleştirme katmanları"

#: src/libslic3r/SLAPrintSteps.cpp:435
msgid "Too many overlapping holes."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:442
msgid ""
"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:450
msgid "Unable to drill the current configuration of holes into the model."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:470
msgid ""
"Drilling holes into the mesh failed. This is usually caused by broken model. "
"Try to fix it first."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:476
msgid "Failed to drill some holes into the model"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:520
msgid ""
"Slicing had to be stopped due to an internal error: Inconsistent slice index."
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:691 src/libslic3r/SLAPrintSteps.cpp:700
#: src/libslic3r/SLAPrintSteps.cpp:738
msgid "Visualizing supports"
msgstr "Görselleştirme destekleri"

#: src/libslic3r/SLAPrintSteps.cpp:730
msgid "No pad can be generated for this model with the current configuration"
msgstr ""

#: src/libslic3r/SLAPrintSteps.cpp:854
msgid ""
"There are unprintable objects. Try to adjust support settings to make the "
"objects printable."
msgstr ""

#: src/libslic3r/PrintBase.cpp:84
msgid "Failed processing of the output_filename_format template."
msgstr "Output_filename_format şablonunun işlenmesi başarısız oldu."

#: src/libslic3r/PrintConfig.cpp:235 src/libslic3r/PrintConfig.cpp:236
msgid "Printer technology"
msgstr "Yazıcı teknolojisi"

#: src/libslic3r/PrintConfig.cpp:243
msgid "Bed shape"
msgstr "Tabla şekli"

#: src/libslic3r/PrintConfig.cpp:248
msgid "Bed custom texture"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:253
msgid "Bed custom model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:258
msgid "Elephant foot compensation"
msgstr "Fil ayağı koruması"

#: src/libslic3r/PrintConfig.cpp:260
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"İlk katmanda ezilme, bir diğer ismiyle fil ayağı etkisini önlemek için ilk "
"katman XY düzleminde bu değer kadar küçültülecektir."

#: src/libslic3r/PrintConfig.cpp:268
msgid "G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:269
msgid ""
"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
"following format: \"XxY, XxY, ...\""
msgstr ""

#: src/libslic3r/PrintConfig.cpp:275
msgid "Format of G-code thumbnails"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:276
msgid ""
"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
"QOI for low memory firmware"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:287
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"Bu ayar, dilimlerin / katmanların yüksekliğini (ve böylece toplam sayıyı) "
"kontrol eder. Daha ince katmanlar daha iyi doğruluk sağlar ancak yazdırması "
"daha uzun sürer."

#: src/libslic3r/PrintConfig.cpp:294
msgid "Max print height"
msgstr "En fazla baskı yüksekliği"

#: src/libslic3r/PrintConfig.cpp:295
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""
"Bunu, yazdırma sırasında ekstrüderinizin ulaşabileceği en fazla yüksekliğe "
"ayarlayın."

#: src/libslic3r/PrintConfig.cpp:303
msgid "Hostname, IP or URL"
msgstr "Ana bilgisayar adı, IP veya URL"

#: src/libslic3r/PrintConfig.cpp:304
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:313
msgid "API Key / Password"
msgstr "API Anahtarı / Şifre"

#: src/libslic3r/PrintConfig.cpp:314
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"Slic3r, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu "
"alan, API Anahtarını veya kimlik doğrulama için gereken şifreyi içermelidir."

#: src/libslic3r/PrintConfig.cpp:322
msgid "Name of the printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:330
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""
"HTTPS OctoPrint bağlantıları için crt/pem biçiminde özel CA sertifika "
"dosyası belirtilebilir. Boş bırakılırsa, varsayılan OS CA sertifika "
"kullanılır."

#: src/libslic3r/PrintConfig.cpp:346
msgid "Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:354
msgid "Ignore HTTPS certificate revocation checks"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:355
msgid ""
"Ignore HTTPS certificate revocation checks in case of missing or offline "
"distribution points. One may want to enable this option for self signed "
"certificates if connection fails."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:362
msgid "Printer preset names"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:363
msgid "Names of presets related to the physical printer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:368
msgid "Authorization Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:373
msgid "API key"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:374
msgid "HTTP digest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:394
msgid "Avoid crossing perimeters"
msgstr "Yan duvarların üzerinden geçme"

#: src/libslic3r/PrintConfig.cpp:395
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"Nozülün duvarların üzerinden geçişini en aza indirmek için hareketleri "
"optimize eder. Bu çoğunlukla sızmaya maruz kalan Bowden ekstrüderleri ile "
"faydalıdır. Bu özellik hem yazdırmayı hem de G-code oluşumunu yavaşlatır."

#: src/libslic3r/PrintConfig.cpp:402
msgid "Avoid crossing perimeters - Max detour length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:404
msgid ""
"The maximum detour length for avoid crossing perimeters. If the detour is "
"longer than this value, avoid crossing perimeters is not applied for this "
"travel path. Detour length could be specified either as an absolute value or "
"as percentage (for example 50%) of a direct travel path."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:407
msgid "mm or % (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:414 src/libslic3r/PrintConfig.cpp:2807
msgid "Other layers"
msgstr "Diğer katmanlar"

#: src/libslic3r/PrintConfig.cpp:415
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""
"İlk katman sonrasındaki katmanlar için tabla sıcaklığı. Tabla ısı kontrol "
"komutlarını devre dışı bırakmak için bunu sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:418
msgid "Bed temperature"
msgstr "Tabla sıcaklığı"

#: src/libslic3r/PrintConfig.cpp:425
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"Bu özel kod, Z hareketinden hemen önce her katman değişikliğinde eklenir. "
"Yer tutucu değişkenlerini tüm Slic3r ayarlarının yanı sıra [layer_num] ve "
"[layer_z] için kullanabileceğinizi unutmayın."

#: src/libslic3r/PrintConfig.cpp:435
msgid "Between objects G-code"
msgstr "Nesneler arasında G-code"

#: src/libslic3r/PrintConfig.cpp:436
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"Sıralı baskı kullanılırken bu kod nesneler arasına eklenir. Varsayılan "
"olarak ekstrüder ve tabla sıcaklığı, non-wait komutunu kullanarak "
"sıfırlanır; ancak bu özel kodda M104, M109, M140 veya M190 algılanırsa, "
"Slic3r sıcaklık komutları eklemeyecektir. Tüm Slic3r ayarları için yer "
"tutucu değişkenleri kullanabileceğinizi unutmayın, böylece istediğiniz yere "
"\\ \"M109 S [first_layer_temperature] \" komutunu koyabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:447
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "Alt yüzeylerde üretilecek katı katmanların sayısı."

#: src/libslic3r/PrintConfig.cpp:448
msgid "Bottom solid layers"
msgstr "Alt katı katman"

#: src/libslic3r/PrintConfig.cpp:456
msgid ""
"The number of bottom solid layers is increased above bottom_solid_layers if "
"necessary to satisfy minimum thickness of bottom shell."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:458
msgid "Minimum bottom shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:464
msgid "Bridge"
msgstr "Köprü"

#: src/libslic3r/PrintConfig.cpp:465
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""
"Bu, yazıcınızın köprüler için kullanacağı hızlanmadır. Köprüler için "
"hızlanma kontrolünü devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:467 src/libslic3r/PrintConfig.cpp:638
#: src/libslic3r/PrintConfig.cpp:1187 src/libslic3r/PrintConfig.cpp:1196
#: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1689
#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:1751
#: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1959
msgid "mm/s²"
msgstr "mm/s²"

#: src/libslic3r/PrintConfig.cpp:473
msgid "Bridging angle"
msgstr "Köprü açısı"

#: src/libslic3r/PrintConfig.cpp:475
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"Varsayılan köprü açısını geçersiz kılar. Sıfır olursa, köprü açısı otomatik "
"olarak hesaplanır. Aksi takdirde, verilen açı tüm köprüler için "
"kullanılacaktır. Sıfır açı için 180° kullanın."

#: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:1097
#: src/libslic3r/PrintConfig.cpp:2250 src/libslic3r/PrintConfig.cpp:2260
#: src/libslic3r/PrintConfig.cpp:2551 src/libslic3r/PrintConfig.cpp:2792
#: src/libslic3r/PrintConfig.cpp:3009 src/libslic3r/PrintConfig.cpp:3110
#: src/libslic3r/PrintConfig.cpp:3693 src/libslic3r/PrintConfig.cpp:3814
msgid "°"
msgstr "°"

#: src/libslic3r/PrintConfig.cpp:484
msgid "Bridges fan speed"
msgstr "Köprü fan hızı"

#: src/libslic3r/PrintConfig.cpp:485
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "Bu fan hızı tüm köprüler ve çıkıntılar sırasında uygulanır."

#: src/libslic3r/PrintConfig.cpp:486 src/libslic3r/PrintConfig.cpp:1109
#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:1769
#: src/libslic3r/PrintConfig.cpp:1832 src/libslic3r/PrintConfig.cpp:2083
#: src/libslic3r/PrintConfig.cpp:2142 src/libslic3r/PrintConfig.cpp:3134
#: src/libslic3r/PrintConfig.cpp:3149 src/libslic3r/PrintConfig.cpp:3318
#: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:3733
msgid "%"
msgstr "%"

#: src/libslic3r/PrintConfig.cpp:493
msgid "Bridge flow ratio"
msgstr "Köprü akış oranı"

#: src/libslic3r/PrintConfig.cpp:495
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"Bu faktör köprüleme için plastik miktarını etkiler. Ekstrüdatları çekmek ve "
"sarkmasını önlemek için hafifçe azaltabilirsiniz, bununla birlikte "
"varsayılan ayarlar genellikle iyidir ve ince ayar yapmadan önce soğutma (bir "
"fan kullanın) denemelisiniz."

#: src/libslic3r/PrintConfig.cpp:505
msgid "Bridges"
msgstr "Köprüler"

#: src/libslic3r/PrintConfig.cpp:507
msgid "Speed for printing bridges."
msgstr "Köprü yazdırma hızı."

#: src/libslic3r/PrintConfig.cpp:508 src/libslic3r/PrintConfig.cpp:916
#: src/libslic3r/PrintConfig.cpp:924 src/libslic3r/PrintConfig.cpp:933
#: src/libslic3r/PrintConfig.cpp:941 src/libslic3r/PrintConfig.cpp:968
#: src/libslic3r/PrintConfig.cpp:987 src/libslic3r/PrintConfig.cpp:1324
#: src/libslic3r/PrintConfig.cpp:1514 src/libslic3r/PrintConfig.cpp:1596
#: src/libslic3r/PrintConfig.cpp:1672 src/libslic3r/PrintConfig.cpp:1706
#: src/libslic3r/PrintConfig.cpp:1718 src/libslic3r/PrintConfig.cpp:1728
#: src/libslic3r/PrintConfig.cpp:1791 src/libslic3r/PrintConfig.cpp:1850
#: src/libslic3r/PrintConfig.cpp:1990 src/libslic3r/PrintConfig.cpp:2217
#: src/libslic3r/PrintConfig.cpp:2226 src/libslic3r/PrintConfig.cpp:2757
#: src/libslic3r/PrintConfig.cpp:2907 src/libslic3r/PrintConfig.cpp:2917
msgid "mm/s"
msgstr "mm/s"

#: src/libslic3r/PrintConfig.cpp:515
msgid "Brim width"
msgstr "Kenar genişliği"

#: src/libslic3r/PrintConfig.cpp:517
msgid ""
"The horizontal width of the brim that will be printed around each object on "
"the first layer. When raft is used, no brim is generated (use "
"raft_first_layer_expansion)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:526
msgid "Brim type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:528
msgid ""
"The places where the brim will be printed around each object on the first "
"layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:534
msgid "No brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:535
msgid "Outer brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:536
msgid "Inner brim only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:537
msgid "Outer and inner brim"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:542
msgid "Brim separation gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:544
msgid ""
"Offset of brim from the printed object. The offset is applied after the "
"elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:551
msgid "Clip multi-part objects"
msgstr "Çok parçalı nesneleri kırp"

#: src/libslic3r/PrintConfig.cpp:552
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"Çok malzemeli nesneler yazdırırken, Slic3r çakışan nesne parçalarını birbiri "
"ardına kırpacaktır (ikinci parça birinci ile, üçüncü parça birinci ve ikinci "
"vb. ile kırpılacaktır)."

#: src/libslic3r/PrintConfig.cpp:559
msgid "Colorprint height"
msgstr "Renkli baskı yüksekliği"

#: src/libslic3r/PrintConfig.cpp:560
msgid "Heights at which a filament change is to occur."
msgstr "Bir filament değişiminin meydana geldiği yükseklikler."

#: src/libslic3r/PrintConfig.cpp:570
msgid "Compatible printers condition"
msgstr "Uyumlu yazıcılar durumu"

#: src/libslic3r/PrintConfig.cpp:571
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"Etkin bir yazıcı profilinin yapılandırma değerlerini kullanan bir boolean "
"ifadesi. Bu ifade doğru olarak değerlendirilirse, bu profil etkin yazıcı "
"profiliyle uyumlu olarak kabul edilir."

#: src/libslic3r/PrintConfig.cpp:585
msgid "Compatible print profiles condition"
msgstr "Uyumlu baskı profilleri koşulu"

#: src/libslic3r/PrintConfig.cpp:586
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"Aktif bir yazdırma profilinin yapılandırma değerlerini kullanan bir boolean "
"ifadesi. Bu ifade doğru olarak değerlendirilirse, bu profil aktif yazdırma "
"profiliyle uyumlu olarak kabul edilir."

#: src/libslic3r/PrintConfig.cpp:603
msgid "Complete individual objects"
msgstr "Tek tek nesneleri tamamla"

#: src/libslic3r/PrintConfig.cpp:604
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"Birden çok nesne veya kopya yazdırırken, bu özellik her nesneyi bir "
"sonrakine geçmeden önce tamamlar (ve onu alt katmanından başlatır). Bu "
"özellik, hatalı baskı riskini önlemek için kullanışlıdır. Slic3r sizi "
"ekstrüder çarpmalarına karşı uyarır ve önlem alır fakat yine de dikkatli "
"olun."

#: src/libslic3r/PrintConfig.cpp:612
msgid "Enable auto cooling"
msgstr "Otomatik soğutmayı etkinleştir"

#: src/libslic3r/PrintConfig.cpp:613
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""
"Bu bayrak, baskı hızını ve fan hızını katman baskı zamanına göre ayarlayan "
"otomatik soğutma mantığını etkinleştirir."

#: src/libslic3r/PrintConfig.cpp:618
msgid "Cooling tube position"
msgstr "Soğutma tüpü konumu"

#: src/libslic3r/PrintConfig.cpp:619
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "Soğutma tüpünün merkez noktasının ekstrüder ucundan mesafesi."

#: src/libslic3r/PrintConfig.cpp:626
msgid "Cooling tube length"
msgstr "Soğutma tüpü uzunluğu"

#: src/libslic3r/PrintConfig.cpp:627
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr ""
"Soğutma tüpünün içindeki hareketleri sınırlamak için soğutma tüpünün "
"uzunluğu."

#: src/libslic3r/PrintConfig.cpp:635
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"Özel hızlandırma değerleri kullanıldıktan sonra (duvar / dolgu) sıfırlanacak "
"olan ivmedir. Hızlanmayı sıfırlamayı önlemek için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:644
msgid "Default filament profile"
msgstr "Varsayılan filament profili"

#: src/libslic3r/PrintConfig.cpp:645
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"Geçerli yazıcı profiliyle ilişkilendirilmiş varsayılan filament profili. "
"Geçerli yazıcı profilinin seçilmesinde bu filament profili "
"etkinleştirilecektir."

#: src/libslic3r/PrintConfig.cpp:651
msgid "Default print profile"
msgstr "Varsayılan yazdırma profili"

#: src/libslic3r/PrintConfig.cpp:652 src/libslic3r/PrintConfig.cpp:3537
#: src/libslic3r/PrintConfig.cpp:3548
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"Geçerli yazıcı profiliyle ilişkilendirilmiş varsayılan yazdırma profili. "
"Geçerli yazıcı profili seçildiğinde, bu baskı profili etkinleştirilecektir."

#: src/libslic3r/PrintConfig.cpp:658
msgid "Disable fan for the first"
msgstr "Fanın devre dışı bırakılacağı katman sayısı"

#: src/libslic3r/PrintConfig.cpp:659
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"Bunu, ilk katmanlar sırasında fanı devre dışı bırakmak için pozitif bir "
"değere ayarlayabilirsiniz, böylece yapışma daha kötü olmaz."

#: src/libslic3r/PrintConfig.cpp:668
msgid "Don't support bridges"
msgstr "Köprüleri destekleme"

#: src/libslic3r/PrintConfig.cpp:670
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""
"Desteklerin köprülü alanlar altında oluşturulmasını önlemek için deneysel "
"seçenek."

#: src/libslic3r/PrintConfig.cpp:676
msgid "Distance between copies"
msgstr "Kopyalar arasındaki mesafe"

#: src/libslic3r/PrintConfig.cpp:677
msgid "Distance used for the auto-arrange feature of the plater."
msgstr "Tablanın otomatik düzenleme özelliği için kullanılan mesafesi."

#: src/libslic3r/PrintConfig.cpp:685
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all PrusaSlicer settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:695
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode (and before any toolchange from this filament in case of "
"multimaterial printers). Note that you can use placeholder variables for all "
"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
"in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:706
msgid "Ensure vertical shell thickness"
msgstr "Dikey kabuk kalınlığını sağlamlaştır"

#: src/libslic3r/PrintConfig.cpp:708
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""
"Dikey kabuk kalınlığını (üst + alt katı katmanlar) garanti altına almak için "
"eğimli yüzeylerin yanına katı dolgu ekler."

#: src/libslic3r/PrintConfig.cpp:714
msgid "Top fill pattern"
msgstr "Üst dolgu deseni"

#: src/libslic3r/PrintConfig.cpp:716
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""
"Üst dolgu deseni. Bu sadece üstteki görünür katmanı etkiler, bitişik katı "
"katmanları etkilemez."

#: src/libslic3r/PrintConfig.cpp:726 src/libslic3r/PrintConfig.cpp:1164
#: src/libslic3r/PrintConfig.cpp:2722 src/libslic3r/PrintConfig.cpp:2739
msgid "Rectilinear"
msgstr "Düz çizgili"

#: src/libslic3r/PrintConfig.cpp:727
msgid "Monotonic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:1165
msgid "Aligned Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:1171
#: src/libslic3r/PrintConfig.cpp:2740
msgid "Concentric"
msgstr "Ortak merkezli"

#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:1175
msgid "Hilbert Curve"
msgstr "Hilbert Eğrisi"

#: src/libslic3r/PrintConfig.cpp:731 src/libslic3r/PrintConfig.cpp:1176
msgid "Archimedean Chords"
msgstr "Arşimet Akorları"

#: src/libslic3r/PrintConfig.cpp:732 src/libslic3r/PrintConfig.cpp:1177
msgid "Octagram Spiral"
msgstr "Octagram Spiral"

#: src/libslic3r/PrintConfig.cpp:738
msgid "Bottom fill pattern"
msgstr "Alt dolgu deseni"

#: src/libslic3r/PrintConfig.cpp:740
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""
"Alt dolgu deseni. Bu sadece alt dış görünür tabakayı etkiler, bitişik katı "
"katmanları etkilemez."

#: src/libslic3r/PrintConfig.cpp:749 src/libslic3r/PrintConfig.cpp:761
msgid "External perimeters"
msgstr "Dış duvar"

#: src/libslic3r/PrintConfig.cpp:751
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"Harici duvar için manuel ekstrüzyon genişliğini ayarlamak için bunu sıfır "
"olmayan bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı takdirde "
"varsayılan ekstrüzyon genişliği kullanılacaktır, aksi takdirde 1.125 x nozül "
"çapı kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% 200), katman "
"yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:754 src/libslic3r/PrintConfig.cpp:865
#: src/libslic3r/PrintConfig.cpp:1218 src/libslic3r/PrintConfig.cpp:1421
#: src/libslic3r/PrintConfig.cpp:1478 src/libslic3r/PrintConfig.cpp:1505
#: src/libslic3r/PrintConfig.cpp:1979 src/libslic3r/PrintConfig.cpp:2365
#: src/libslic3r/PrintConfig.cpp:2539 src/libslic3r/PrintConfig.cpp:2628
#: src/libslic3r/PrintConfig.cpp:2863 src/libslic3r/PrintConfig.cpp:3098
#: src/libslic3r/PrintConfig.cpp:3173
msgid "mm or %"
msgstr "mm veya %"

#: src/libslic3r/PrintConfig.cpp:763
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Bu ayar harici duvar hızlarını (görünür olanları) etkiler. Yüzde olarak "
"ifade edilirse (örneğin:% 80), yukarıdaki duvar hız ayarında hesaplanır. "
"Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:766 src/libslic3r/PrintConfig.cpp:1240
#: src/libslic3r/PrintConfig.cpp:1251 src/libslic3r/PrintConfig.cpp:2324
#: src/libslic3r/PrintConfig.cpp:2377 src/libslic3r/PrintConfig.cpp:2708
#: src/libslic3r/PrintConfig.cpp:2877
msgid "mm/s or %"
msgstr "mm/s veya %"

#: src/libslic3r/PrintConfig.cpp:773
msgid "External perimeters first"
msgstr "Önce dış duvarlar"

#: src/libslic3r/PrintConfig.cpp:775
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr "Duvarları önce en dıştan başlayarak en içe doğru basar."

#: src/libslic3r/PrintConfig.cpp:781
msgid "Extra perimeters if needed"
msgstr "Gerekirse fazladan duvar ekle"

#: src/libslic3r/PrintConfig.cpp:783
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"Eğimli duvarlardaki boşlukları önlemek için gerektiğinde daha fazla duvar "
"ekler. Slic3r, hemen üstteki döngünün %70'inden fazlası desteklenene kadar "
"duvar eklemeye devam eder."

#: src/libslic3r/PrintConfig.cpp:793
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"Kullanılacak ekstrüder (daha spesifik ekstrüder ayarları belirtilmedikçe). "
"Bu değer, duvar ve dolgu ekstrüderlerini geçersiz kılar, ancak destek "
"ekstrüderlerini etkilemez."

#: src/libslic3r/PrintConfig.cpp:805
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"Bunu, nozül ucu ile (genellikle) X taşıyıcı çubukları arasındaki dikey "
"mesafeye ayarlayın. Başka bir deyişle, bu ekstrüderin etrafındaki boşaltma "
"silindirinin yüksekliğidir ve ekstrüderin diğer basılı nesnelerle "
"çarpışmadan önce gözetebileceği en fazla derinliği temsil eder."

#: src/libslic3r/PrintConfig.cpp:816
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"Bunu, ekstrüderinizin etrafındaki boşluk yarıçapına ayarlayın. Ekstrüder "
"ortalanmamışsa, güvenlik için en büyük değeri seçin. Bu ayar, çarpışmaları "
"kontrol etmek ve grafiksel ön izlemeyi tablada görüntülemek için kullanılır."

#: src/libslic3r/PrintConfig.cpp:826
msgid "Extruder Color"
msgstr "Ekstrüder Rengi"

#: src/libslic3r/PrintConfig.cpp:827 src/libslic3r/PrintConfig.cpp:890
#: src/libslic3r/PrintConfig.cpp:3389
msgid "This is only used in the Slic3r interface as a visual help."
msgstr "Bu sadece Slic3r arayüzünde görsel bir yardım olarak kullanılır."

#: src/libslic3r/PrintConfig.cpp:833
msgid "Extruder offset"
msgstr "Ekstrüder ofset"

#: src/libslic3r/PrintConfig.cpp:834
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"Ürün yazılımınız ekstrüder yer değiştirmesini işlemiyorsa, hesaba katmak "
"için G koduna ihtiyacınız vardır. Bu seçenek, her ekstrüderin birincisine "
"göre yer değiştirmesini belirtmenizi sağlar. Pozitif koordinatlar "
"girilmelidir (XY koordinatından çıkarılacaklar)."

#: src/libslic3r/PrintConfig.cpp:843
msgid "Extrusion axis"
msgstr "Ekstrüzyon ekseni"

#: src/libslic3r/PrintConfig.cpp:844
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"Yazıcınızın ekstrüderiyle ilişkili eksen harfini ayarlamak için bu seçeneği "
"kullanın (genellikle E ancak bazı yazıcılar A kullanır)."

#: src/libslic3r/PrintConfig.cpp:849
msgid "Extrusion multiplier"
msgstr "Ekstrüzyon çarpanı"

#: src/libslic3r/PrintConfig.cpp:850
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"Bu faktör, akış miktarını orantılı olarak değiştirir. Güzel yüzey kalitesi "
"elde etmek ve tek duvar genişliğini düzeltmek için bu ayarı ince ayar "
"yapmanız gerekebilir. Her zamanki değerler 0,9 ile 1,1 arasındadır. Bunu "
"daha fazla değiştirmeniz gerektiğini düşünüyorsanız, filament çapını ve ürün "
"yazılımı E adımlarınızı kontrol edin."

#: src/libslic3r/PrintConfig.cpp:859
msgid "Default extrusion width"
msgstr "Varsayılan ekstrüzyon genişliği"

#: src/libslic3r/PrintConfig.cpp:861
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"Manuel bir ekstrüzyon genişliği sağlamak için bunu sıfır olmayan bir değere "
"ayarlayın. Sıfır bırakılırsa Slic3r, nozül çapından ekstrüzyon "
"genişliklerini türetir (duvar ekstrüzyon genişliği, dolgu ekstrüzyon "
"genişliği vb. İçin araç ipuçlarına bakın). Yüzde olarak ifade edilirse "
"(örneğin:% 230), katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:873
msgid "Keep fan always on"
msgstr "Fanı daima açık tut"

#: src/libslic3r/PrintConfig.cpp:874
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"Bu etkinleştirilirse, fan hiçbir zaman devre dışı bırakılmaz ve en azından "
"en düşük hızında çalışmaya devam eder. PLA için faydalı, ABS için zararlı."

#: src/libslic3r/PrintConfig.cpp:879
msgid "Enable fan if layer print time is below"
msgstr "Katman yazdırma süresi bu değerin altındaysa fanı etkinleştir"

#: src/libslic3r/PrintConfig.cpp:880
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"Katman baskı süresi bu sürenin altında tahmin edilirse, fan etkinleşecek ve "
"hızı en az ve en fazla hızları kullanılarak hesaplanacaktır."

#: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:2312
msgid "approximate seconds"
msgstr "yaklaşık saniye"

#: src/libslic3r/PrintConfig.cpp:889 src/libslic3r/PrintConfig.cpp:3388
msgid "Color"
msgstr "Renk"

#: src/libslic3r/PrintConfig.cpp:895
msgid "Filament notes"
msgstr "Filament notları"

#: src/libslic3r/PrintConfig.cpp:896
msgid "You can put your notes regarding the filament here."
msgstr "Filament ile ilgili notlarınızı buraya yazabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:904 src/libslic3r/PrintConfig.cpp:1797
msgid "Max volumetric speed"
msgstr "En yüksek hacimsel hız"

#: src/libslic3r/PrintConfig.cpp:905
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"Bu filament için izin verilen en fazla hacimsel hız. Bir baskının en fazla "
"hacimsel hızını en düşük baskı ve filament hacimsel hızıyla sınırlandırır. "
"Limitsiz olarak sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:914
msgid "Loading speed"
msgstr "Yükleme hızı"

#: src/libslic3r/PrintConfig.cpp:915
msgid "Speed used for loading the filament on the wipe tower."
msgstr "Filamenti temizleme kulesi üzerinde yüklemek için kullanılan hız."

#: src/libslic3r/PrintConfig.cpp:922
msgid "Loading speed at the start"
msgstr "Başlangıçta yükleme hızı"

#: src/libslic3r/PrintConfig.cpp:923
msgid "Speed used at the very beginning of loading phase."
msgstr "Yükleme aşamasının başında kullanılan hız."

#: src/libslic3r/PrintConfig.cpp:930
msgid "Unloading speed"
msgstr "Boşaltma hızı"

#: src/libslic3r/PrintConfig.cpp:931
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming)."
msgstr ""
"Temizleme kulesinde filamenti boşaltmak için kullanılan hız (boşaltmanın ilk "
"kısmını etkilemez)."

#: src/libslic3r/PrintConfig.cpp:939
msgid "Unloading speed at the start"
msgstr "Başlangıçta boşaltma hızı"

#: src/libslic3r/PrintConfig.cpp:940
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming."
msgstr ""
"Sıkıştırma işleminden hemen sonra filamentin ucunu boşaltmak için kullanılan "
"hız."

#: src/libslic3r/PrintConfig.cpp:947
msgid "Delay after unloading"
msgstr "Boşaltma işleminden sonra gecikme"

#: src/libslic3r/PrintConfig.cpp:948
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions."
msgstr ""
"Filament boşaltıldıktan sonra bekleme süresi. Orijinal boyutlarına küçültmek "
"için daha fazla zamana ihtiyaç duyan esnek malzemelerle güvenilir takım "
"değişimleri elde etmenize yardımcı olabilir."

#: src/libslic3r/PrintConfig.cpp:957
msgid "Number of cooling moves"
msgstr "Soğutma hareketi sayısı"

#: src/libslic3r/PrintConfig.cpp:958
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr ""
"Filament, soğutma tüplerinde ileri geri hareket ettirilerek soğutulur. Bu "
"hareketlerin istediğiniz sayısını belirtin."

#: src/libslic3r/PrintConfig.cpp:966
msgid "Speed of the first cooling move"
msgstr "İlk soğutma hareketinin hızı"

#: src/libslic3r/PrintConfig.cpp:967
msgid "Cooling moves are gradually accelerating beginning at this speed."
msgstr "Soğutma hızı bu seviyeden başlayarak kademeli olarak artacaktır."

#: src/libslic3r/PrintConfig.cpp:974
msgid "Minimal purge on wipe tower"
msgstr "Temizleme kulesinde en düşük temizleme"

#: src/libslic3r/PrintConfig.cpp:975
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"Bir takım değişiminden sonra, yeni yüklenen filamentin tam konumu "
"bilinmeyebilir ve filament basıncı henüz sabit değildir. Nozülü bir dolgu "
"alanı veya gözden çıkarılmış bir nesne ile temizlemeden önce, Slic3r, arka "
"arkaya dolgulu veya gözden çıkarılmış nesne ekstrüzyonlarını güvenilir bir "
"şekilde üretmek için her zaman bu miktardaki malzemeyi temizleme kulesine "
"doldurur."

#: src/libslic3r/PrintConfig.cpp:979
msgid "mm³"
msgstr "mm³"

#: src/libslic3r/PrintConfig.cpp:985
msgid "Speed of the last cooling move"
msgstr "Son soğutma hareketinin hızı"

#: src/libslic3r/PrintConfig.cpp:986
msgid "Cooling moves are gradually accelerating towards this speed."
msgstr "Soğutma hızı yavaş yavaş bu hıza doğru artacaktır."

#: src/libslic3r/PrintConfig.cpp:993
msgid "Filament load time"
msgstr "Filament yükleme süresi"

#: src/libslic3r/PrintConfig.cpp:994
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Yazıcı yazılımının (veya Çok Malzemeli Ünite 2.0) takım değiştirme sırasında "
"(T kodu yürütülürken) yeni bir filament yükleme zamanı. Bu süre, G-code "
"zaman tahmincisi tarafından toplam yazdırma zamanına eklenir."

#: src/libslic3r/PrintConfig.cpp:1001
msgid "Ramming parameters"
msgstr "Sıkıştırma parametreleri"

#: src/libslic3r/PrintConfig.cpp:1002
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr ""
"Bu dize RammingDialog tarafından düzenlenmiştir ve sıkıştırma özel "
"parametrelerini içerir."

#: src/libslic3r/PrintConfig.cpp:1008
msgid "Filament unload time"
msgstr "Filament boşaltma süresi"

#: src/libslic3r/PrintConfig.cpp:1009
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"Yazıcı yazılımının (veya Çok Malzemeli Birim 2.0) bir takım değişikliği "
"sırasında (T kodunu yürütürken) bir filamenti boşaltma süresi. Bu süre, G-"
"code zaman tahmincisi tarafından toplam yazdırma zamanına eklenir."

#: src/libslic3r/PrintConfig.cpp:1017
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"Filament çapınızı buraya girin. İyi bir hassasiyet gereklidir, bu nedenle "
"bir kumpas kullanın ve filament boyunca birçok ölçüm yapın, ardından "
"ortalamayı hesaplayın."

#: src/libslic3r/PrintConfig.cpp:1024 src/libslic3r/PrintConfig.cpp:3427
#: src/libslic3r/PrintConfig.cpp:3428
msgid "Density"
msgstr "Yoğunluk"

#: src/libslic3r/PrintConfig.cpp:1025
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"Filament yoğunluğunuzu buraya girin. Bu sadece istatistiksel bilgi içindir. "
"İyi bir yol, bilinen bir filament uzunluğunu tartmak ve uzunluğun hacme "
"oranını hesaplamaktır. Daha iyisi, hacmi doğrudan yer değiştirme yoluyla "
"hesaplamaktır."

#: src/libslic3r/PrintConfig.cpp:1028
msgid "g/cm³"
msgstr "g/cm³"

#: src/libslic3r/PrintConfig.cpp:1033
msgid "Filament type"
msgstr "Filament tipi"

#: src/libslic3r/PrintConfig.cpp:1034
msgid "The filament material type for use in custom G-codes."
msgstr "Özel G kodlarında kullanım için filament malzeme tipi."

#: src/libslic3r/PrintConfig.cpp:1061
msgid "Soluble material"
msgstr "Çözünür malzeme"

#: src/libslic3r/PrintConfig.cpp:1062
msgid "Soluble material is most likely used for a soluble support."
msgstr "Çözünebilir malzeme genellikle destekler için kullanılır."

#: src/libslic3r/PrintConfig.cpp:1068
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""
"Buraya kg başına filament maliyetinizi girin. Bu sadece istatistiksel bilgi "
"içindir."

#: src/libslic3r/PrintConfig.cpp:1069
msgid "money/kg"
msgstr "fiyat/kg"

#: src/libslic3r/PrintConfig.cpp:1074
msgid "Spool weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1075
msgid ""
"Enter weight of the empty filament spool. One may weigh a partially consumed "
"filament spool before printing and one may compare the measured weight with "
"the calculated weight of the filament with the spool to find out whether the "
"amount of filament on the spool is sufficient to finish the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1079
msgid "g"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:3532
msgid "(Unknown)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1092
msgid "Fill angle"
msgstr "Doldurma açısı"

#: src/libslic3r/PrintConfig.cpp:1094
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"Dolgu oryantasyonu için varsayılan taban açısı. Buna çapraz tarama "
"uygulanacaktır. Köprüler, Slic3r uygulamasının algılayabileceği en iyi yön "
"kullanılarak doldurulur, bu nedenle bu ayar onları etkilemez."

#: src/libslic3r/PrintConfig.cpp:1106
msgid "Fill density"
msgstr "Dolgu yoğunluğu"

#: src/libslic3r/PrintConfig.cpp:1108
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "İç dolgu yoğunluğu, %0 - %100 aralığında ifade edilir."

#: src/libslic3r/PrintConfig.cpp:1143
msgid "Fill pattern"
msgstr "Dolgu deseni"

#: src/libslic3r/PrintConfig.cpp:1145
msgid "Fill pattern for general low-density infill."
msgstr "Genel düşük yoğunluklu dolgu için dolgu deseni."

#: src/libslic3r/PrintConfig.cpp:1166 src/libslic3r/PrintConfig.cpp:2771
msgid "Grid"
msgstr "Kafes"

#: src/libslic3r/PrintConfig.cpp:1168
msgid "Stars"
msgstr "Yıldızlar"

#: src/libslic3r/PrintConfig.cpp:1169
msgid "Cubic"
msgstr "Kübik"

#: src/libslic3r/PrintConfig.cpp:1170
msgid "Line"
msgstr "Hat"

#: src/libslic3r/PrintConfig.cpp:1172 src/libslic3r/PrintConfig.cpp:2724
msgid "Honeycomb"
msgstr "Bal peteği"

#: src/libslic3r/PrintConfig.cpp:1173
msgid "3D Honeycomb"
msgstr "3B Petek"

#: src/libslic3r/PrintConfig.cpp:1174
msgid "Gyroid"
msgstr "Gyroid"

#: src/libslic3r/PrintConfig.cpp:1178
msgid "Adaptive Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1179
msgid "Support Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1180
msgid "Lightning"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1185
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""
"Bu, yazıcınızın ilk katman için kullanacağı hızlanmadır. İlk katman için "
"hızlanma kontrolünü devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1193
msgid "First object layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1194
msgid ""
"This is the acceleration your printer will use for first layer of object "
"above raft interface. Set zero to disable acceleration control for first "
"layer of object above raft interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1203
msgid "First layer bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1204
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""
"İlk katman için ısıtılmış tabla sıcaklığı. G-code dosyası tabla sıcaklığı "
"kontrol komutlarını devre dışı bırakmak için bunu sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1214
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"İlk katman için manuel ekstrüzyon genişliğini ayarlamak üzere bunu sıfır "
"olmayan bir değere ayarlayın. Bunu, daha iyi yapışma için daha fazla "
"ekstrüder zorlamak için kullanabilirsiniz. Yüzde olarak ifade edilirse "
"(örneğin% 120), ilk katman yüksekliği üzerinden hesaplanır. Sıfıra "
"ayarlanırsa, varsayılan ekstrüzyon genişliğini kullanır."

#: src/libslic3r/PrintConfig.cpp:1228
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1236
msgid "First layer speed"
msgstr "İlk katman hızı"

#: src/libslic3r/PrintConfig.cpp:1237
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"Mutlak değer olarak mm/s cinsinden ifade edilirse, bu hız, türüne "
"bakılmaksızın, ilk katmanın tüm yazdırma hareketlerine uygulanır. Yüzde "
"olarak ifade edilirse (örneğin:% 40), varsayılan hızları ölçeklendirir."

#: src/libslic3r/PrintConfig.cpp:1247
msgid "Speed of object first layer over raft interface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1248
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first object layer above raft interface, regardless "
"of their type. If expressed as a percentage (for example: 40%) it will scale "
"the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1258
msgid "First layer nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1259
msgid ""
"Nozzle temperature for the first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1267
msgid "Full fan speed at layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1268
msgid ""
"Fan speed will be ramped up linearly from zero at layer "
"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
"\"full_fan_speed_layer\" will be ignored if lower than "
"\"disable_fan_first_layers\", in which case the fan will be running at "
"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1280
msgid "Fuzzy skin type."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1287
msgid "Outside walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1288
msgid "All walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1293
msgid "Fuzzy skin thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1295
msgid ""
"The maximum distance that each skin point can be offset (both ways), "
"measured perpendicular to the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1303
msgid "Fuzzy skin point distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1305
msgid ""
"Perimeters will be split into multiple segments by inserting Fuzzy skin "
"points. Lowering the Fuzzy skin point distance will increase the number of "
"randomly offset points on the perimeter wall."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1313
msgid "Fill gaps"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1315
msgid ""
"Enables filling of gaps between perimeters and between the inner most "
"perimeters and infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1322
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"Kısa zikzak hamleleri kullanarak küçük boşlukları doldurma hızı. Çok fazla "
"titreme ve rezonans sorunlarından kaçınmak için bunu oldukça düşük tutun. "
"Boşluk doldurmayı devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1330
msgid "Verbose G-code"
msgstr "Ayrıntılı G-kodu"

#: src/libslic3r/PrintConfig.cpp:1331
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"G-code dosyası her satırına açıklayıcı birer metin eklemek için "
"etkinleştirin. SD karttan yazdırma işleminde dosya büyüklüğü artacağından "
"yazılıma ek bir yük getirebilir."

#: src/libslic3r/PrintConfig.cpp:1338
msgid "G-code flavor"
msgstr "G-code derleyici"

#: src/libslic3r/PrintConfig.cpp:1339
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1366
msgid "No extrusion"
msgstr "Ekstrüzyon yok"

#: src/libslic3r/PrintConfig.cpp:1371
msgid "Label objects"
msgstr "Nesneleri etiketle"

#: src/libslic3r/PrintConfig.cpp:1372
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""
"G-code dosyasına baskı hareketlerinin hangi nesneye ait olduklarını "
"belirtmesi amacıyla etiketler eklemek için bu seçeneği aktif edin. Octoprint "
"Nesne İptal (CancelObject) eklentisi için kullanışlıdır. Bu ayarlar, Tek "
"Ekstrüder Çoklu Malzeme ayarları ile uyumlu DEĞİLDİR."

#: src/libslic3r/PrintConfig.cpp:1379
msgid "G-code substitutions"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1380
msgid "Find / replace patterns in G-code lines and substitute them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1385
msgid "High extruder current on filament swap"
msgstr "Filament değişiminde yüksek ekstrüder akımı"

#: src/libslic3r/PrintConfig.cpp:1386
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"Filament değiştirme sekansı sırasında ekstrüder motor akımını arttırmak, "
"hızlı sıkıştırma hızlarını sağlamak ve çirkin şekilli bir ucu olan bir "
"filament yüklenirken direncin üstesinden gelmek için faydalı olabilir."

#: src/libslic3r/PrintConfig.cpp:1394
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""
"Bu, yazıcınızın dolgu için kullanacağı hızlanmadır. Dolgu için hızlanma "
"kontrolünü devre dışı bırakmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1402
msgid "Combine infill every"
msgstr "Her n katmanda bir dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1404
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"Bu özellik, dolguyu birleştirmenize ve ince duvarları korurken daha kalın "
"dolgu katmanlarını sıkıştırarak baskınızı hızlandırır, böylece doğruluk "
"sağlar."

#: src/libslic3r/PrintConfig.cpp:1407
msgid "Combine infill every n layers"
msgstr "Her n katmanındaki dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1413
msgid "Length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1415
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than infill_anchor_max is found, the infill line is "
"connected to a perimeter segment at just one side and the length of the "
"perimeter segment taken is limited to this parameter, but no longer than "
"anchor_length_max. Set this parameter to zero to disable anchoring "
"perimeters connected to a single infill line."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1431
msgid "0 (no open anchors)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1432 src/libslic3r/PrintConfig.cpp:1455
msgid "1 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1433 src/libslic3r/PrintConfig.cpp:1456
msgid "2 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1434 src/libslic3r/PrintConfig.cpp:1457
msgid "5 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1435 src/libslic3r/PrintConfig.cpp:1458
msgid "10 mm"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1436 src/libslic3r/PrintConfig.cpp:1459
msgid "1000 (unlimited)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1441
msgid "Maximum length of the infill anchor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1443
msgid ""
"Connect an infill line to an internal perimeter with a short segment of an "
"additional perimeter. If expressed as percentage (example: 15%) it is "
"calculated over infill extrusion width. PrusaSlicer tries to connect two "
"close infill lines to a short perimeter segment. If no such perimeter "
"segment shorter than this parameter is found, the infill line is connected "
"to a perimeter segment at just one side and the length of the perimeter "
"segment taken is limited to infill_anchor, but no longer than this "
"parameter. Set this parameter to zero to disable anchoring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1454
msgid "0 (not anchored)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1464
msgid "Infill extruder"
msgstr "Dolgu"

#: src/libslic3r/PrintConfig.cpp:1466
msgid "The extruder to use when printing infill."
msgstr "Dolgu yazdırırken kullanılacak ekstrüder."

#: src/libslic3r/PrintConfig.cpp:1474
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Dolgu için manuel ekstrüzyon genişliğini ayarlamak üzere bunu sıfır olmayan "
"bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı takdirde varsayılan "
"ekstrüzyon genişliği kullanılacaktır, aksi takdirde 1.125 x nozül çapı "
"kullanılacaktır. Dolguyu hızlandırmak ve parçalarınızı daha güçlü hale "
"getirmek için yağlı ekstrüdatlar kullanmak isteyebilirsiniz. Yüzde olarak "
"ifade edilirse (örneğin% 90), katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:1485
msgid "Infill before perimeters"
msgstr "Duvarlardan önce dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1486
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""
"Bu seçenek, varsayılanın aksine önce dolguyu yapıp daha sonra duvarların "
"basılmasını sağlar."

#: src/libslic3r/PrintConfig.cpp:1491
msgid "Only infill where needed"
msgstr "Sadece ihtiyaç duyulan yerlerde dolgu yap"

#: src/libslic3r/PrintConfig.cpp:1493
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"Bu seçenek, tavanları desteklemek için gerçekte ihtiyaç duyulan alanlarla "
"dolumu sınırlayacaktır (iç destek olarak işlev görecektir). "
"Etkinleştirilirse, söz konusu birden fazla kontrol nedeniyle G kodu "
"oluşumunu yavaşlatır."

#: src/libslic3r/PrintConfig.cpp:1500
msgid "Infill/perimeters overlap"
msgstr "Dolgu/duvar üst üste binme"

#: src/libslic3r/PrintConfig.cpp:1502
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"Bu ayar daha iyi bir yapıştırma için dolgu ve duvar arasında ek bir üst üste "
"bindirme uygular. Teorik olarak buna ihtiyaç duyulmamalı, ancak geri tepme "
"boşluklara neden olabilir. Yüzde olarak ifade edilirse (örnek:% 15), duvar "
"ekstrüzyon genişliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:1513
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr "Dahili dolguyu yazdırma hızı. Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1521
msgid "Inherits profile"
msgstr "Miras profil"

#: src/libslic3r/PrintConfig.cpp:1522
msgid "Name of the profile, from which this profile inherits."
msgstr "Bu profilin devraldığı profilin adı."

#: src/libslic3r/PrintConfig.cpp:1535
msgid "Interface shells"
msgstr "Ara bağlantı duvarları"

#: src/libslic3r/PrintConfig.cpp:1536
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"Bitişik malzemeler/hacimler arasında katı kabuk oluşumuna zorlar. Yarı "
"saydam malzemelerle veya çözülebilir destek malzemeleriyle çoklu ekstrüder "
"baskıları için kullanışlıdır."

#: src/libslic3r/PrintConfig.cpp:1544
msgid "Maximum width of a segmented region"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1545
msgid "Maximum width of a segmented region. Zero disables this feature."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1546 src/libslic3r/PrintConfig.cpp:2157
#: src/libslic3r/PrintConfig.cpp:2166
msgid "mm (zero to disable)"
msgstr "mm (devre dışı bırakmak için sıfır)"

#: src/libslic3r/PrintConfig.cpp:1553
msgid "Enable ironing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1554
msgid ""
"Enable ironing of the top layers with the hot print head for smooth surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1560 src/libslic3r/PrintConfig.cpp:1562
msgid "Ironing Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1567
msgid "All top surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1568
msgid "Topmost surface only"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1569
msgid "All solid surfaces"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1574
msgid "Flow rate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1576
msgid "Percent of a flow rate relative to object's normal layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1584
msgid "Spacing between ironing passes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1586
msgid "Distance between ironing lines"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1603
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"Bu özel kod, Z hareketinden hemen sonra ve ekstrüder ilk katman noktasına "
"hareket etmeden önce her katman değişiminde eklenir. Yer tutucu "
"değişkenlerini tüm Slic3r ayarlarının yanı sıra [layer_num] ve [layer_z] "
"için kullanabileceğinizi unutmayın."

#: src/libslic3r/PrintConfig.cpp:1614
msgid "Supports remaining times"
msgstr "Kalan süreleri destekler"

#: src/libslic3r/PrintConfig.cpp:1615
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"Yazılımın kalan süreyi doğru göstermesi için M73 P [yazdırılan yüzde] R "
"[dakika cinsinden kalan süre], G-code içine 1 dakikalık aralıklarla "
"uygulanır. Şu an itibariyle sadece Prusa i3 MK3 yazılımı M73'ü tanıyor. "
"Ayrıca i3 MK3 üretici yazılımı sessiz mod için M73 Qxx Sxx'i destekler."

#: src/libslic3r/PrintConfig.cpp:1623
msgid "Supports stealth mode"
msgstr "Gizli modu destekler"

#: src/libslic3r/PrintConfig.cpp:1624
msgid "The firmware supports stealth mode"
msgstr "Üretici yazılımı gizli modu destekliyor"

#: src/libslic3r/PrintConfig.cpp:1629
msgid "How to apply limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1630
msgid "Purpose of Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1632
msgid "How to apply the Machine Limits"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1637
msgid "Emit to G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1638
msgid "Use for time estimate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1639
msgid "Ignore"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1662
msgid "Maximum feedrate X"
msgstr "En yüksek hız X"

#: src/libslic3r/PrintConfig.cpp:1663
msgid "Maximum feedrate Y"
msgstr "En yüksek hız Y"

#: src/libslic3r/PrintConfig.cpp:1664
msgid "Maximum feedrate Z"
msgstr "En yüksek hız Z"

#: src/libslic3r/PrintConfig.cpp:1665
msgid "Maximum feedrate E"
msgstr "En yüksek hız E"

#: src/libslic3r/PrintConfig.cpp:1668
msgid "Maximum feedrate of the X axis"
msgstr "X ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1669
msgid "Maximum feedrate of the Y axis"
msgstr "Y ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1670
msgid "Maximum feedrate of the Z axis"
msgstr "Z ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1671
msgid "Maximum feedrate of the E axis"
msgstr "E ekseninin en fazla ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1679
msgid "Maximum acceleration X"
msgstr "En yüksek hızlanma X"

#: src/libslic3r/PrintConfig.cpp:1680
msgid "Maximum acceleration Y"
msgstr "En yüksek hızlanma Y"

#: src/libslic3r/PrintConfig.cpp:1681
msgid "Maximum acceleration Z"
msgstr "En yüksek hızlanma Z"

#: src/libslic3r/PrintConfig.cpp:1682
msgid "Maximum acceleration E"
msgstr "En yüksek hızlanma E"

#: src/libslic3r/PrintConfig.cpp:1685
msgid "Maximum acceleration of the X axis"
msgstr "X ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1686
msgid "Maximum acceleration of the Y axis"
msgstr "Y ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1687
msgid "Maximum acceleration of the Z axis"
msgstr "Z ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1688
msgid "Maximum acceleration of the E axis"
msgstr "E ekseninin en yüksek ivmesi"

#: src/libslic3r/PrintConfig.cpp:1696
msgid "Maximum jerk X"
msgstr "En yüksek ani hareket X"

#: src/libslic3r/PrintConfig.cpp:1697
msgid "Maximum jerk Y"
msgstr "En yüksek ani hareket Y"

#: src/libslic3r/PrintConfig.cpp:1698
msgid "Maximum jerk Z"
msgstr "En yüksek ani hareket Z"

#: src/libslic3r/PrintConfig.cpp:1699
msgid "Maximum jerk E"
msgstr "En yüksek ani hareket E"

#: src/libslic3r/PrintConfig.cpp:1702
msgid "Maximum jerk of the X axis"
msgstr "X ekseninin en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1703
msgid "Maximum jerk of the Y axis"
msgstr "Y ekseninin en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1704
msgid "Maximum jerk of the Z axis"
msgstr "Z ekseni en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1705
msgid "Maximum jerk of the E axis"
msgstr "E ekseninin en yüksek ani hareketi"

#: src/libslic3r/PrintConfig.cpp:1715
msgid "Minimum feedrate when extruding"
msgstr "Ekstrüzyon sırasında en düşük ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1717
msgid "Minimum feedrate when extruding (M205 S)"
msgstr "Ekstrüzyon sırasında en düşük ilerleme hızı (M205 S)"

#: src/libslic3r/PrintConfig.cpp:1725
msgid "Minimum travel feedrate"
msgstr "En düşük boşta ilerleme hızı"

#: src/libslic3r/PrintConfig.cpp:1727
msgid "Minimum travel feedrate (M205 T)"
msgstr "En düşük hareket hızı (M205 T)"

#: src/libslic3r/PrintConfig.cpp:1735
msgid "Maximum acceleration when extruding"
msgstr "Ekstrüzyon sırasında en yüksek hızlanma"

#: src/libslic3r/PrintConfig.cpp:1737
msgid ""
"Maximum acceleration when extruding (M204 P)\n"
"\n"
"Marlin (legacy) firmware flavor will use this also as travel acceleration "
"(M204 T)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1748
msgid "Maximum acceleration when retracting"
msgstr "Geri çekilirken en yüksek hızlanma"

#: src/libslic3r/PrintConfig.cpp:1750
msgid "Maximum acceleration when retracting (M204 R)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1758
msgid "Maximum acceleration for travel moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1760
msgid "Maximum acceleration for travel moves (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1767 src/libslic3r/PrintConfig.cpp:1776
msgid "Max"
msgstr "En fazla"

#: src/libslic3r/PrintConfig.cpp:1768
msgid "This setting represents the maximum speed of your fan."
msgstr "Bu ayar, fanınızın en fazla hızını gösterir."

#: src/libslic3r/PrintConfig.cpp:1777
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"Bu extrüder için basılabilir en yüksek katman kalınlığıdır ve değişken "
"katman yüksekliği ile destek katman yüksekliği için kullanılır. Katmanlar "
"arası en iyi yapışma sağlamak için tavsiye edilen en büyük katman yüksekliği "
"ekstrüzyon genişliğinin %75'idir. Eğer 0 olarak girilirse katman yüksekliği "
"nozül çapının %75'i ile sınırlandırılır."

#: src/libslic3r/PrintConfig.cpp:1787
msgid "Max print speed"
msgstr "En yüksek baskı hızı"

#: src/libslic3r/PrintConfig.cpp:1788
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"Diğer hız ayarlarını 0 olarak ayarlarken Slic3r, sabit ekstrüder basıncını "
"korumak için optimum hızı otomatik olarak hesaplayacaktır. Bu deneysel ayar, "
"izin vermek istediğiniz en yüksek baskı hızını ayarlamak için kullanılır."

#: src/libslic3r/PrintConfig.cpp:1798
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""
"Bu deneysel ayar, ekstrüderinizin desteklediği en fazla hacimsel hızı "
"ayarlamak için kullanılır."

#: src/libslic3r/PrintConfig.cpp:1806
msgid "Max volumetric slope positive"
msgstr "Max hacimsel eğim pozitif"

#: src/libslic3r/PrintConfig.cpp:1807
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
"(feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1812 src/libslic3r/PrintConfig.cpp:1824
msgid "mm³/s²"
msgstr "mm³/s²"

#: src/libslic3r/PrintConfig.cpp:1818
msgid "Max volumetric slope negative"
msgstr "En yüksek hacimsel eğim negatif"

#: src/libslic3r/PrintConfig.cpp:1819
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
"(feedrate 20 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1830 src/libslic3r/PrintConfig.cpp:1839
msgid "Min"
msgstr "Min"

#: src/libslic3r/PrintConfig.cpp:1831
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""
"Bu ayar, fanınızın çalışması için gereken en düşük PWM değerini gösterir."

#: src/libslic3r/PrintConfig.cpp:1840
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"Bu ekstrüder için yazdırılabilir en düşük katman yüksekliğidir ve değişken "
"katman yüksekliği için çözünürlüğü sınırlar. Tipik değerler 0,05 mm ile 0,1 "
"mm arasındadır."

#: src/libslic3r/PrintConfig.cpp:1848
msgid "Min print speed"
msgstr "En düşük baskı hızı"

#: src/libslic3r/PrintConfig.cpp:1849
msgid "Slic3r will not scale speed down below this speed."
msgstr "Slic3r, hızı bu değerin altına düşürmez."

#: src/libslic3r/PrintConfig.cpp:1856
msgid "Minimal filament extrusion length"
msgstr "En düşük filament ekstrüzyon uzunluğu"

#: src/libslic3r/PrintConfig.cpp:1857
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"Eteği basmak için gereken filament uzunluğu belirtilen değerden daha az ise "
"en az bu değer kadar filament kullanılarak etek basılır. Çoklu ekstrüder "
"yazıcılarda bu her ekstrüder için geçerlidir."

#: src/libslic3r/PrintConfig.cpp:1866
msgid "Configuration notes"
msgstr "Yapılandırma notları"

#: src/libslic3r/PrintConfig.cpp:1867
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"Kişisel notlarınızı buraya yazabilirsiniz. Bu metin G-kod başlığı "
"yorumlarına eklenecektir."

#: src/libslic3r/PrintConfig.cpp:1877
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "Nozül çapı (örneğin: 0,5, 0,35 vb.)"

#: src/libslic3r/PrintConfig.cpp:1882
msgid "Host Type"
msgstr "Ana bilgisayar türü"

#: src/libslic3r/PrintConfig.cpp:1883
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""
"Slic3r, G kodu dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu "
"alan, ana bilgisayarın türünü içermelidir."

#: src/libslic3r/PrintConfig.cpp:1905
msgid "Only retract when crossing perimeters"
msgstr "Yalnızca duvarların üzerinden geçerken geri çekme uygula"

#: src/libslic3r/PrintConfig.cpp:1906
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""
"Üst katmanın duvarları üzerinden geçilmeyecek ise geri çekmeyi devre dışı "
"bırak. (böylece herhangi bir sızıntı muhtemelen görünmez olacaktır)."

#: src/libslic3r/PrintConfig.cpp:1913
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""
"Bu seçenek sızmayı önlemek için aktif olmayan ekstrüderlerin sıcaklığını "
"düşürecektir. Otomatik olarak uzun bir eteğe izin verecek ve sıcaklık "
"değiştirirken ekstrüderleri bu eteklerin dışına taşıyacaktır."

#: src/libslic3r/PrintConfig.cpp:1920
msgid "Output filename format"
msgstr "Çıktı dosya adı ve türü"

#: src/libslic3r/PrintConfig.cpp:1921
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"Tüm konfigürasyon seçeneklerini bu şablon içindeki değişkenler olarak "
"kullanabilirsiniz. Örneğin: [layer_height], [fill_density], [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."

#: src/libslic3r/PrintConfig.cpp:1930
msgid "Detect bridging perimeters"
msgstr "Köprüleme duvarlarını algıla"

#: src/libslic3r/PrintConfig.cpp:1932
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"Askıda kalan bölgelerde filament akışını ayarlamak için deneysel seçenek "
"(köprü akışı kullanılacaktır). Köprü işleminde geçerli hız uygulanır ve fan "
"etkinleştirilir."

#: src/libslic3r/PrintConfig.cpp:1938
msgid "Filament parking position"
msgstr "Filament park yeri"

#: src/libslic3r/PrintConfig.cpp:1939
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware."
msgstr ""
"Nozülün, filamentin boşaltıldığında park edildiği pozisyondan uzaklığı. Bu "
"değer yazıcı yazılımındaki değerle eşleşmelidir."

#: src/libslic3r/PrintConfig.cpp:1947
msgid "Extra loading distance"
msgstr "Fazladan yükleme mesafesi"

#: src/libslic3r/PrintConfig.cpp:1948
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading."
msgstr ""
"Sıfıra ayarlandığında, filamentin yükleme sırasında park konumundan hareket "
"ettirildiği mesafe, yükleme sırasında geri taşınan ile tamamen aynıdır. "
"Pozitif olduğunda, eklenirse, negatifse, yükleme hareketi boşaltmadan daha "
"kısadır."

#: src/libslic3r/PrintConfig.cpp:1956 src/libslic3r/PrintConfig.cpp:1973
#: src/libslic3r/PrintConfig.cpp:1987 src/libslic3r/PrintConfig.cpp:1997
msgid "Perimeters"
msgstr "Duvarlar"

#: src/libslic3r/PrintConfig.cpp:1957
msgid ""
"This is the acceleration your printer will use for perimeters. Set zero to "
"disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1964
msgid "Perimeter extruder"
msgstr "Duvar"

#: src/libslic3r/PrintConfig.cpp:1966
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""
"Duvar ve kenarları (brim) yazdırırken kullanılacak ekstrüder. İlk ekstrüder "
"1'dir."

#: src/libslic3r/PrintConfig.cpp:1975
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"Duvar için manuel ekstrüzyon genişliği ayarlamak için bunu sıfır olmayan bir "
"değere ayarlayın. Daha hassas yüzeyler elde etmek için daha ince "
"ekstrüderler kullanmak isteyebilirsiniz. Sıfır bırakılırsa, ayarlandığı "
"takdirde varsayılan ekstrüzyon genişliği kullanılacaktır, aksi takdirde "
"1.125 x nozül çapı kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% "
"200) katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:1989
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr "Duvarlar için hız. Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:1999
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"Bu seçenek, her katman için oluşturulacak duvar sayısını ayarlar. "
"Slic3r'nin, Fazladan Duvar seçeneği etkinse, daha yüksek sayıda duvarlardan "
"yararlanan eğimli yüzeyleri tespit ettiğinde bu sayıyı otomatik olarak "
"artırabileceğini unutmayın."

#: src/libslic3r/PrintConfig.cpp:2003
msgid "(minimum)"
msgstr "(En az)"

#: src/libslic3r/PrintConfig.cpp:2011
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"G-code satırlarını özel komut dosyaları aracılığıyla işlemek istiyorsanız, "
"burada mutlak yollarını listeleyebilirsiniz. Birden çok komut dosyasını "
"noktalı virgülle ayırın. Komut dosyaları, G argümanına giden mutlak yolu ilk "
"argüman olarak geçirir ve ortam değişkenlerini okuyarak Slic3r ayarlarına "
"erişebilirler."

#: src/libslic3r/PrintConfig.cpp:2023
msgid "Printer type"
msgstr "Yazıcı tipi"

#: src/libslic3r/PrintConfig.cpp:2024
msgid "Type of the printer."
msgstr "Yazıcının tipi."

#: src/libslic3r/PrintConfig.cpp:2029
msgid "Printer notes"
msgstr "Yazıcı notları"

#: src/libslic3r/PrintConfig.cpp:2030
msgid "You can put your notes regarding the printer here."
msgstr "Yazıcıyla ilgili notlarınızı buraya yazabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:2038
msgid "Printer vendor"
msgstr "Yazıcı satıcısı"

#: src/libslic3r/PrintConfig.cpp:2039
msgid "Name of the printer vendor."
msgstr "Yazıcı satıcısının adı."

#: src/libslic3r/PrintConfig.cpp:2044
msgid "Printer variant"
msgstr "Yazıcı varyantı"

#: src/libslic3r/PrintConfig.cpp:2045
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""
"Yazıcı varyantının adı. Örneğin, yazıcı varyantları bir nozül çapı ile ayırt "
"edilebilir."

#: src/libslic3r/PrintConfig.cpp:2062
msgid "Raft contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2064
msgid ""
"The vertical distance between object and raft. Ignored for soluble interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2071
msgid "Raft expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2073
msgid "Expansion of the raft in XY plane for better stability."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2080
msgid "First layer density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2082
msgid "Density of the first raft or support layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2090
msgid "First layer expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2092
msgid ""
"Expansion of the first raft or support layer to improve adhesion to print "
"bed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2099
msgid "Raft layers"
msgstr "Alt destek katman sayısı"

#: src/libslic3r/PrintConfig.cpp:2101
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""
"Nesne bu sayıda katman kadar yükseltilecek ve altında destek üretilecektir."

#: src/libslic3r/PrintConfig.cpp:2109
msgid "Slice resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2110
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"Dilimleme işini hızlandırmak ve bellek kullanımını azaltmak için girdi "
"dosyasını basitleştirmek için kullanılan en düşük detay çözünürlüğü. Yüksek "
"çözünürlüklü modeller genellikle yazıcıların verebileceğinden daha fazla "
"ayrıntı taşır. Herhangi bir basitleştirmeyi devre dışı bırakmak ve girişten "
"gelen tam çözünürlüğü kullanmak için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2120
msgid "G-code resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2121
msgid ""
"Maximum deviation of exported G-code paths from their full resolution "
"counterparts. Very high resolution G-code requires huge amount of RAM to "
"slice and preview, also a 3D printer may stutter not being able to process a "
"high resolution G-code in a timely manner. On the other hand, a low "
"resolution G-code will produce a low poly effect and because the G-code "
"reduction is performed at each layer independently, visible artifacts may be "
"produced."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2132
msgid "Minimum travel after retraction"
msgstr "Geri çekmeden sonra en düşük hareket"

#: src/libslic3r/PrintConfig.cpp:2133
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr "Boşta hareket bu uzunluktan kısa olduğunda geri çekme tetiklenmez."

#: src/libslic3r/PrintConfig.cpp:2139
msgid "Retract amount before wipe"
msgstr "Temizleme işleminden önce geri çekilecek miktar"

#: src/libslic3r/PrintConfig.cpp:2140
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""
"Bowden ekstrüderleri ile, temizleme hareketini yapmadan önce bir miktar "
"hızlı geri çekme yapmak akıllıca olabilir."

#: src/libslic3r/PrintConfig.cpp:2147
msgid "Retract on layer change"
msgstr "Katman değişiminde geri çek"

#: src/libslic3r/PrintConfig.cpp:2148
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "Bir Z hareketi yapıldığında bu seçenek geri çekmeye zorlar."

#: src/libslic3r/PrintConfig.cpp:2153 src/libslic3r/PrintConfig.cpp:2161
msgid "Length"
msgstr "Uzunluk"

#: src/libslic3r/PrintConfig.cpp:2154
msgid "Retraction Length"
msgstr "Geri çekme uzunluğu"

#: src/libslic3r/PrintConfig.cpp:2155
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"Geri çekme tetiklendiğinde, filament belirtilen miktarda geri çekilir "
"(uzunluk, ekstrüzyona girmeden önce ham filament üzerinde ölçülür)."

#: src/libslic3r/PrintConfig.cpp:2162
msgid "Retraction Length (Toolchange)"
msgstr "Geri Çekme Uzunluğu (Takım Değişimi)"

#: src/libslic3r/PrintConfig.cpp:2163
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"Alet değiştirilmeden önce geri çekme tetiklendiğinde, filament belirtilen "
"miktarda geri çekilir (uzunluk, ham filament üzerinde, ekstrüdere girmeden "
"önce ölçülür)."

#: src/libslic3r/PrintConfig.cpp:2171
msgid "Lift Z"
msgstr "Z kaldırma"

#: src/libslic3r/PrintConfig.cpp:2172
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"Bunu pozitif bir değere ayarlarsanız, her geri çekme tetiklendiğinde Z hızlı "
"bir şekilde yükselir. Birden fazla ekstrüder kullanıldığında, yalnızca ilk "
"ekstrüder için ayar dikkate alınacaktır."

#: src/libslic3r/PrintConfig.cpp:2179
msgid "Above Z"
msgstr "Z'nin üstünde"

#: src/libslic3r/PrintConfig.cpp:2180
msgid "Only lift Z above"
msgstr "Sadece yukarıdaki Z kaldıracı"

#: src/libslic3r/PrintConfig.cpp:2181
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"Bunu pozitif bir değere ayarlarsanız, Z kaldırma yalnızca belirtilen mutlak "
"Z'nin üzerinde gerçekleşir. Bu ayarı, ilk katlarda kaldırmayı atlamak için "
"ayarlayabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:2188
msgid "Below Z"
msgstr "Z altında"

#: src/libslic3r/PrintConfig.cpp:2189
msgid "Only lift Z below"
msgstr "Sadece aşağıda Z kaldırarak"

#: src/libslic3r/PrintConfig.cpp:2190
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"Bunu pozitif bir değere ayarlarsanız, Z kaldırma yalnızca belirtilen mutlak "
"Z'nin altında gerçekleşir. Bu ayarı, asansörü ilk katmanlara sınırlamak için "
"ayarlayabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:2198 src/libslic3r/PrintConfig.cpp:2206
msgid "Extra length on restart"
msgstr "Yeniden başlatma sırasında fazladan uzunluk"

#: src/libslic3r/PrintConfig.cpp:2199
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"Geri çekme işlemi boşta hareketten sonra telafi edildiğinde, ekstrüder bu "
"ilave filament miktarını iter. Bu ayara nadiren ihtiyaç duyulur."

#: src/libslic3r/PrintConfig.cpp:2207
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""
"Alet değiştirildikten sonra geri çekme telafi edildiğinde, ekstrüder bu "
"ilave filament miktarını itecektir."

#: src/libslic3r/PrintConfig.cpp:2214 src/libslic3r/PrintConfig.cpp:2215
msgid "Retraction Speed"
msgstr "Geri çekme hızı"

#: src/libslic3r/PrintConfig.cpp:2216
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "Geri çekme hızı (sadece ekstrüder motoru için geçerlidir)."

#: src/libslic3r/PrintConfig.cpp:2222 src/libslic3r/PrintConfig.cpp:2223
msgid "Deretraction Speed"
msgstr "İleri İtme Hızı"

#: src/libslic3r/PrintConfig.cpp:2224
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"Çekme işleminden sonra bir filamentin ekstrüder içine yüklenme hızı (sadece "
"ekstrüder motoru için geçerlidir). Sıfır bırakılırsa, geri çekme hızı "
"kullanılır."

#: src/libslic3r/PrintConfig.cpp:2231
msgid "Seam position"
msgstr "Katman başlangıç konumu"

#: src/libslic3r/PrintConfig.cpp:2233
msgid "Position of perimeters starting points."
msgstr "Katman başlangıç noktalarının konumu."

#: src/libslic3r/PrintConfig.cpp:2239
msgid "Random"
msgstr "Rasgele"

#: src/libslic3r/PrintConfig.cpp:2240
msgid "Nearest"
msgstr "En yakın"

#: src/libslic3r/PrintConfig.cpp:2241
msgid "Aligned"
msgstr "Hizalı"

#: src/libslic3r/PrintConfig.cpp:2249
msgid "Direction"
msgstr "Yön"

#: src/libslic3r/PrintConfig.cpp:2251
msgid "Preferred direction of the seam"
msgstr "Tercih edilen dikiş yönü"

#: src/libslic3r/PrintConfig.cpp:2252
msgid "Seam preferred direction"
msgstr "Dikiş yönü tercih"

#: src/libslic3r/PrintConfig.cpp:2259
msgid "Jitter"
msgstr "Değişimi"

#: src/libslic3r/PrintConfig.cpp:2261
msgid "Seam preferred direction jitter"
msgstr "Dikiş tercih edilen yön titreşimi"

#: src/libslic3r/PrintConfig.cpp:2262
msgid "Preferred direction of the seam - jitter"
msgstr "Dikişin tercih edilen yönü - titreme"

#: src/libslic3r/PrintConfig.cpp:2269
msgid "Distance from brim/object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2270
msgid ""
"Distance between skirt and brim (when draft shield is not used) or objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2276
msgid "Skirt height"
msgstr "Etek yüksekliği"

#: src/libslic3r/PrintConfig.cpp:2277
msgid "Height of skirt expressed in layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2283
msgid "Draft shield"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2284
msgid ""
"With draft shield active, the skirt will be printed skirt_distance from the "
"object, possibly intersecting brim.\n"
"Enabled = skirt is as tall as the highest printed object.\n"
"Limited = skirt is as tall as specified by skirt_height.\n"
"This is useful to protect an ABS or ASA print from warping and detaching "
"from print bed due to wind draft."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2292
msgid "Disabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2293
msgid "Limited"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2294
msgid "Enabled"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2299
msgid "Loops (minimum)"
msgstr "Etek sayısı (en az)"

#: src/libslic3r/PrintConfig.cpp:2300
msgid "Skirt Loops"
msgstr "Etek Sayısı"

#: src/libslic3r/PrintConfig.cpp:2301
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"Etek için ilmek sayısı. En düşük Ekstrüzyon Uzunluğu seçeneği ayarlanmışsa, "
"döngü sayısı burada yapılandırılandan daha büyük olabilir. Eteği tamamen "
"devre dışı bırakmak için bunu sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2309
msgid "Slow down if layer print time is below"
msgstr "Katman yazdırma süresi bu değerden düşükse yavaşla"

#: src/libslic3r/PrintConfig.cpp:2310
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"Katman yazdırma süresi bu sürenin altında tahmin edilirse, süreyi bu değere "
"uzatmak için yazdırma hızı düşürülür."

#: src/libslic3r/PrintConfig.cpp:2319
msgid "Small perimeters"
msgstr "Küçük duvarlar"

#: src/libslic3r/PrintConfig.cpp:2321
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"Bu ayar yarıçapı <= 6.5mm olan (genellikle delikler) duvar hızını etkiler. "
"Yüzde olarak ifade edilirse (örneğin:% 80), yukarıdaki duvar hız ayarında "
"hesaplanır. Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2331
msgid "Solid infill threshold area"
msgstr "Katı dolgu eşik alanı"

#: src/libslic3r/PrintConfig.cpp:2333
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""
"Belirtilen eşikten daha küçük bir alana sahip bölgeler için katı dolgu "
"yapılmasına zorlar."

#: src/libslic3r/PrintConfig.cpp:2334
msgid "mm²"
msgstr "mm²"

#: src/libslic3r/PrintConfig.cpp:2340
msgid "Solid infill extruder"
msgstr "Katı dolgu"

#: src/libslic3r/PrintConfig.cpp:2342
msgid "The extruder to use when printing solid infill."
msgstr "Katı dolguyu yazdırırken kullanılacak ekstrüder."

#: src/libslic3r/PrintConfig.cpp:2348
msgid "Solid infill every"
msgstr "Her n katmanda bir katı dolgu yap"

#: src/libslic3r/PrintConfig.cpp:2350
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"Bu özellik, verilen her katmanda katı bir katmanın basılmasını sağlar. Devre "
"dışı bırakmak için sıfır girin. Bunu herhangi bir değere ayarlayabilirsiniz "
"(örneğin 9999); Slic3r, nozül çapına ve katman yüksekliğine göre "
"birleştirilecek mümkün olan en fazla katman sayısını otomatik olarak "
"seçecektir."

#: src/libslic3r/PrintConfig.cpp:2362
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"Katı yüzeyler için dolgu için manuel ekstrüzyon genişliğini ayarlamak üzere "
"bunu sıfır olmayan bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı "
"takdirde varsayılan ekstrüzyon genişliği kullanılacaktır, aksi takdirde "
"1.125 x nozül çapı kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% "
"90), katman yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2374
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"Katı bölgelerin yazdırılması için hız (üst / alt / iç yatay kabuklar). Bu, "
"yukarıdaki varsayılan doldurma hızına göre yüzde olarak ifade edilebilir "
"(örneğin:% 80). Otomatik için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2386
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "Üst ve alt yüzeylerde üretilecek katı katmanların sayısı."

#: src/libslic3r/PrintConfig.cpp:2392 src/libslic3r/PrintConfig.cpp:2393
msgid "Minimum thickness of a top / bottom shell"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2399
msgid "Spiral vase"
msgstr "Spiral vazo"

#: src/libslic3r/PrintConfig.cpp:2400
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than one single object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2408
msgid "Temperature variation"
msgstr "Sıcaklık değişimi"

#: src/libslic3r/PrintConfig.cpp:2409
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""
"Bir ekstrüder aktif olmadığında uygulanacak sıcaklık farkı. Nozülün düzenli "
"olarak silindiği tam yükseklikte bir \"temizlik\" eteği oluşturur."

#: src/libslic3r/PrintConfig.cpp:2419
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If PrusaSlicer detects M104 or M190 in your custom "
"codes, such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all PrusaSlicer settings, so you can "
"put a \"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2434
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode (and after any toolchange to this filament in case of multi-material "
"printers). This is used to override settings for a specific filament. If "
"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
"commands will not be prepended automatically so you're free to customize the "
"order of heating commands and other custom actions. Note that you can use "
"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2450
msgid "Color change G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2451
msgid "This G-code will be used as a code for the color change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2460
msgid "This G-code will be used as a code for the pause print"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2469
msgid "This G-code will be used as a custom code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2477
msgid "Single Extruder Multi Material"
msgstr "Tek Ekstrüder Çoklu Filament"

#: src/libslic3r/PrintConfig.cpp:2478
msgid "The printer multiplexes filaments into a single hot end."
msgstr "Tek nozül çok extruder ile çoklu filament kullanan yazıcı türüdür."

#: src/libslic3r/PrintConfig.cpp:2483
msgid "Prime all printing extruders"
msgstr "Tüm ekstrüderleri temizle"

#: src/libslic3r/PrintConfig.cpp:2484
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""
"Etkinleştirildiğinde, tüm yazdırma ekstrüderleri, baskının başlangıcında "
"tablanın ön kenarından temizlenir."

#: src/libslic3r/PrintConfig.cpp:2489
msgid "No sparse layers (EXPERIMENTAL)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2490
msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2497
msgid "Slice gap closing radius"
msgstr "Dilimleme boşluğu kapatma yarı çapı"

#: src/libslic3r/PrintConfig.cpp:2499
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"Üçgen yüzey dilimleme işlemi sırasında aralık kapatma yarıçapından 2 kat "
"küçük çatlaklar doldurulur. Aralık kapatma işlemi, nihai baskı çözünürlüğünü "
"azaltabilir, bu nedenle değerin makul derecede düşük tutulması önerilir."

#: src/libslic3r/PrintConfig.cpp:2507
msgid "Slicing Mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2509
msgid ""
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
"close all holes in the model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2514
msgid "Regular"
msgstr "Normal"

#: src/libslic3r/PrintConfig.cpp:2515
msgid "Even-odd"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2516
msgid "Close holes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2521
msgid "Generate support material"
msgstr "Destekleri aktif et"

#: src/libslic3r/PrintConfig.cpp:2523
msgid "Enable support material generation."
msgstr "Destekleri aktif et."

#: src/libslic3r/PrintConfig.cpp:2527
msgid "Auto generated supports"
msgstr "Destekleri otomatik oluştur"

#: src/libslic3r/PrintConfig.cpp:2529
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"İşaretliyse, çıkma eşik değerine göre destek otomatik olarak oluşturulur. "
"Denetlenmezse, yalnızca \"Destek Uygulayıcı\" birimleri içinde destekler "
"oluşturulur."

#: src/libslic3r/PrintConfig.cpp:2535
msgid "XY separation between an object and its support"
msgstr "Bir nesne ve destek arasındaki XY eksenlerdeki ayrım"

#: src/libslic3r/PrintConfig.cpp:2537
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"Bir nesne ve desteği arasındaki XY ayrımı. Yüzde olarak ifade edilirse "
"(örneğin% 50), dış duvar genişliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2548
msgid "Pattern angle"
msgstr "Desen açısı"

#: src/libslic3r/PrintConfig.cpp:2550
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "Destek desenini yatay düzlemde döndürmek için bu ayarı kullanın."

#: src/libslic3r/PrintConfig.cpp:2560 src/libslic3r/PrintConfig.cpp:3642
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""
"Yalnızca tablaya yerleştirilmiş ise destek oluştur. Baskıda destek oluşturma."

#: src/libslic3r/PrintConfig.cpp:2566
msgid "Top contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2568
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"Nesne ve destek ara bağlantısı arasındaki dikey mesafe. Bunu 0'a ayarlamak "
"ayrıca Slic3r'nin birinci nesne katmanı için köprü akışı ve hız kullanmasını "
"önleyecektir."

#: src/libslic3r/PrintConfig.cpp:2576
msgid "0 (soluble)"
msgstr "0 (çözülebilir)"

#: src/libslic3r/PrintConfig.cpp:2577
msgid "0.1 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2578
msgid "0.2 (detachable)"
msgstr "0.2 (çıkarılabilir)"

#: src/libslic3r/PrintConfig.cpp:2584
msgid "Bottom contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2586
msgid ""
"The vertical distance between the object top surface and the support "
"material interface. If set to zero, support_material_contact_distance will "
"be used for both top and bottom contact Z distances."
msgstr ""

#. TRN To be shown in Print Settings "Bottom contact Z distance". Have to be as short as possible
#. TRN To be shown in Print Settings "Bottom interface layers". Have to be as short as possible
#: src/libslic3r/PrintConfig.cpp:2594 src/libslic3r/PrintConfig.cpp:2679
msgid "Same as top"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2601
msgid "Enforce support for the first"
msgstr "İlk katman için desteğe zorla"

#: src/libslic3r/PrintConfig.cpp:2603
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"Normal desteğin etkinleştirilip etkinleştirilmediğine bakılmaksızın ve "
"herhangi bir açı eşiğine bakılmaksızın, alttan sayılan belirli sayıda katman "
"için destek oluştur. Bu, tablada çok ince veya zayıf bir kaplama alanına "
"sahip nesnelerin daha fazla yapışmasını sağlamak için kullanışlıdır."

#: src/libslic3r/PrintConfig.cpp:2608
msgid "Enforce support for the first n layers"
msgstr "İlk n katman için desteğe zorla"

#: src/libslic3r/PrintConfig.cpp:2614
msgid "Support material/raft/skirt extruder"
msgstr "Destek/sal (raft)/etek (skirt) ekstrüder"

#: src/libslic3r/PrintConfig.cpp:2616
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"Destek, sal (raft) ve etek (skirt) yazdırırken kullanılacak ekstrüder (takım "
"değişimlerini en aza indirmek için mevcut ekstrüder kullanmak için 1+, 0)."

#: src/libslic3r/PrintConfig.cpp:2625
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"Destek için manuel ekstrüzyon genişliğini ayarlamak üzere bunu sıfır olmayan "
"bir değere ayarlayın. Sıfır bırakılırsa, ayarlandığı takdirde varsayılan "
"ekstrüzyon genişliği kullanılacaktır, aksi takdirde nozül çapı "
"kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% 90), katman "
"yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2635
msgid "Interface loops"
msgstr "Ara bağlantı döngüsü"

#: src/libslic3r/PrintConfig.cpp:2637
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""
"Desteklerin üst temas katmanını spiral şeklinde kapat. Varsayılan olarak "
"devre dışı bırakılmıştır."

#: src/libslic3r/PrintConfig.cpp:2642
msgid "Support material/raft interface extruder"
msgstr "Destek/sal (raft) bağlantı ekstrüder"

#: src/libslic3r/PrintConfig.cpp:2644
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"Destek ara bağlantısı yazdırırken kullanılacak ekstrüder (takım "
"değişimlerini en aza indirmek için mevcut ekstrüder kullanmak için 1+, 0). "
"Bu da salı (raft) etkiler."

#: src/libslic3r/PrintConfig.cpp:2652
msgid "Top interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2654
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""
"Nesneler ve destek arasına eklenecek ara bağlantı katmanlarının sayısı."

#: src/libslic3r/PrintConfig.cpp:2661
msgid "0 (off)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2662
msgid "1 (light)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2663
msgid "2 (default)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2664
msgid "3 (heavy)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2670
msgid "Bottom interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2672
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material. Set to -1 to use support_material_interface_layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2685
msgid "Closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2687
msgid ""
"For snug supports, the support regions will be merged using morphological "
"closing operation. Gaps smaller than the closing radius will be filled in."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2695
msgid "Interface pattern spacing"
msgstr "Ara bağlantı deseni aralığı"

#: src/libslic3r/PrintConfig.cpp:2697
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""
"Ara bağlantı çizgileri arasındaki boşluk. Sağlam bir ara bağlantı elde etmek "
"için sıfıra ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2706
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"Destek ara bağlantı katmanlarını yazdırma hızı. Yüzde olarak ifade edilirse "
"(örneğin% 50) destek baskı hızı üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2715
msgid "Pattern"
msgstr "Desen"

#: src/libslic3r/PrintConfig.cpp:2717
msgid "Pattern used to generate support material."
msgstr "Destek için kullanılan desen."

#: src/libslic3r/PrintConfig.cpp:2723
msgid "Rectilinear grid"
msgstr "Doğrusal ızgara"

#: src/libslic3r/PrintConfig.cpp:2729
msgid "Interface pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2731
msgid ""
"Pattern used to generate support material interface. Default pattern for non-"
"soluble support interface is Rectilinear, while default pattern for soluble "
"support interface is Concentric."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2745
msgid "Pattern spacing"
msgstr "Desen aralığı"

#: src/libslic3r/PrintConfig.cpp:2747
msgid "Spacing between support material lines."
msgstr "Destek hatları arasındaki boşluk."

#: src/libslic3r/PrintConfig.cpp:2756
msgid "Speed for printing support material."
msgstr "Destek baskısı için hız."

#: src/libslic3r/PrintConfig.cpp:2763
msgid "Style"
msgstr "Biçem"

#: src/libslic3r/PrintConfig.cpp:2765
msgid ""
"Style and shape of the support towers. Projecting the supports into a "
"regular grid will create more stable supports, while snug support towers "
"will save material and reduce object scarring."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2772
msgid "Snug"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2777
msgid "Synchronize with object layers"
msgstr "Nesne katmanları ile senkronize et"

#: src/libslic3r/PrintConfig.cpp:2779
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""
"Nesne yazdırma katmanlarıyla destek katmanlarını senkronize et. Bu, çoklu "
"extrüder sistemlerde maliyeti düşürmek için kullanışlı bir yöntemdir."

#: src/libslic3r/PrintConfig.cpp:2785
msgid "Overhang threshold"
msgstr "Destek konulacak açı"

#: src/libslic3r/PrintConfig.cpp:2787
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"Eğim açısı (90° = dikey) verilen eşiğin üstünde olan çıkıntılar için destek "
"üretilmez. Başka bir deyişle, bu değer, destek olmadan yazdırabileceğiniz en "
"yatay eğimi (yatay düzlemden ölçülen) temsil eder. Otomatik algılama için "
"sıfıra ayarlayın (önerilir)."

#: src/libslic3r/PrintConfig.cpp:2799
msgid "With sheath around the support"
msgstr "Destek etrafında kılıf"

#: src/libslic3r/PrintConfig.cpp:2801
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"Taban desteğinin etrafına bir kılıf (tek bir duvar çizgisi) ekler. Bu, "
"desteği daha güvenilir hale getirir, ancak kaldırılması da zorlaştırır."

#: src/libslic3r/PrintConfig.cpp:2808
msgid ""
"Nozzle temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2811
msgid "Nozzle temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2817
msgid "Thick bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2819
msgid ""
"If enabled, bridges are more reliable, can bridge longer distances, but may "
"look worse. If disabled, bridges look better but are reliable just for "
"shorter bridged distances."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2825
msgid "Detect thin walls"
msgstr "İnce duvarları algıla"

#: src/libslic3r/PrintConfig.cpp:2827
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"Tek duvarları tespit et (iki sıra duvarın sığmadığı ve bunların tek bir ize "
"daraltılması gereken parçalar)."

#: src/libslic3r/PrintConfig.cpp:2833
msgid "Threads"
msgstr "İş Parçacığı"

#: src/libslic3r/PrintConfig.cpp:2834
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""
"İplikler uzun süren görevleri paralelleştirmek için kullanılır. En uygun iş "
"parçacığı sayısı, kullanılabilir çekirdek / işlemci sayısının biraz "
"üzerindedir."

#: src/libslic3r/PrintConfig.cpp:2846
msgid ""
"This custom code is inserted before every toolchange. Placeholder variables "
"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
"and {next_extruder} can be used. When a tool-changing command which changes "
"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
"will emit no other such command. It is therefore possible to script custom "
"behaviour both before and after the toolchange."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2859
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"Üst yüzeyler için dolgu için manuel ekstrüzyon genişliğini ayarlamak üzere "
"bunu sıfır olmayan bir değere ayarlayın. Tüm dar bölgeleri doldurmak ve daha "
"pürüzsüz bir yüzey elde etmek için daha ince ekstrüderler kullanmak "
"isteyebilirsiniz. Sıfır bırakılırsa, ayarlandığı takdirde varsayılan "
"ekstrüzyon genişliği kullanılacaktır, aksi takdirde nozül çapı "
"kullanılacaktır. Yüzde olarak ifade edilirse (örneğin% 90), katman "
"yüksekliği üzerinden hesaplanır."

#: src/libslic3r/PrintConfig.cpp:2872
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"Üst katı katmanları yazdırma hızı (yalnızca en üstteki dış katmanlara "
"uygulanır, iç katı katmanlarına uygulanmaz). Daha güzel bir yüzey elde etmek "
"için bunu yavaşlatmak isteyebilirsiniz. Bu, yukarıdaki katı doldurma hızına "
"göre yüzde (örneğin:% 80) olarak ifade edilebilir. Otomatik için sıfıra "
"ayarlayın."

#: src/libslic3r/PrintConfig.cpp:2887
msgid "Number of solid layers to generate on top surfaces."
msgstr "Üst yüzeylerde üretilecek katı katmanların sayısı."

#: src/libslic3r/PrintConfig.cpp:2888
msgid "Top solid layers"
msgstr "Üst katı katmanlar"

#: src/libslic3r/PrintConfig.cpp:2896
msgid ""
"The number of top solid layers is increased above top_solid_layers if "
"necessary to satisfy minimum thickness of top shell. This is useful to "
"prevent pillowing effect when printing with variable layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2899
msgid "Minimum top shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2906
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "Boşta hareket için hız (uzak ekstrüzyon noktaları arasında atlar)."

#: src/libslic3r/PrintConfig.cpp:2914
msgid "Z travel"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2915
msgid ""
"Speed for movements along the Z axis.\n"
"When set to zero, the value is ignored and regular travel speed is used "
"instead."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2923
msgid "Use firmware retraction"
msgstr "Yazılım geri çekme özelliğini kullan"

#: src/libslic3r/PrintConfig.cpp:2924
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"Bu deneysel ayar, üretici yazılımının geri çekmeyi ele alması için G10 ve "
"G11 komutlarını kullanır. Bu sadece son Marlin'de desteklenir."

#: src/libslic3r/PrintConfig.cpp:2930
msgid "Use relative E distances"
msgstr "Bağıl E mesafeleri kullan"

#: src/libslic3r/PrintConfig.cpp:2931
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""
"Yazılımınız göreceli E değerleri gerektiriyorsa, bunu kontrol edin, aksi "
"halde işaretlemeden bırakın. Çoğu yazılım mutlak değerleri kullanır."

#: src/libslic3r/PrintConfig.cpp:2937
msgid "Use volumetric E"
msgstr "Hacimsel E kullan"

#: src/libslic3r/PrintConfig.cpp:2938
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"Bu deneysel ayar, E değerlerini doğrusal milimetre yerine kübik milimetre "
"cinsinden verir. Üretici yazılımınız zaten filament çapını bilmiyorsa, "
"volumetrik modu açmak ve seçilen filamentle ilişkili filament çapını "
"kullanmak için başlangıç kodunuzda 'M200 D [filament çapı] T0' gibi komutlar "
"ekleyebilirsiniz. Bu sadece son sürüm Marlin'de desteklenir."

#: src/libslic3r/PrintConfig.cpp:2948
msgid "Enable variable layer height feature"
msgstr "Değişken katman yüksekliği özelliğini etkinleştir"

#: src/libslic3r/PrintConfig.cpp:2949
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"Bazı yazıcılarda veya yazıcı ayarlarında, değişken katman yüksekliğinde "
"yazdırmakta zorluk olabilir. Varsayılan olarak etkindir."

#: src/libslic3r/PrintConfig.cpp:2955
msgid "Wipe while retracting"
msgstr "Geri çekerken temizlik de yap"

#: src/libslic3r/PrintConfig.cpp:2956
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""
"Bu seçenek sızdıran ekstrüderlerde olası kabarcıkları en aza indirmek için "
"geri çekme esnasında nozülü hareket ettirecektir."

#: src/libslic3r/PrintConfig.cpp:2963
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"Çok malzemeli yazıcıların ekstrüderleri takım değişikliklerinde doldurması "
"veya boşaltması gerekebilir. Fazla malzemeyi temizleme kulesine boşaltır."

#: src/libslic3r/PrintConfig.cpp:2969
msgid "Purging volumes - load/unload volumes"
msgstr "Boşaltma hacimleri - hacimleri yükleme / boşaltma"

#: src/libslic3r/PrintConfig.cpp:2970
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below."
msgstr ""
"Bu vektör, temizleme kulesinde kullanılan her bir aletten / a geçmek için "
"gereken hacimleri kaydeder. Bu değerler aşağıdaki tüm temizleme hacimlerinin "
"oluşturulmasını kolaylaştırmak için kullanılır."

#: src/libslic3r/PrintConfig.cpp:2976
msgid "Purging volumes - matrix"
msgstr "Boşaltma hacimleri - matris"

#: src/libslic3r/PrintConfig.cpp:2977
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools."
msgstr ""
"Bu matris, temizleme kulesinde yeni filamenti herhangi bir takım çifti için "
"temizlemek için gereken hacimleri (kübik milimetre cinsinden) açıklar."

#: src/libslic3r/PrintConfig.cpp:2986
msgid "Position X"
msgstr "X Konumu"

#: src/libslic3r/PrintConfig.cpp:2987
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "Temizleme kulesinin sol ön köşesinin X koordinatı"

#: src/libslic3r/PrintConfig.cpp:2993
msgid "Position Y"
msgstr "Y konumu"

#: src/libslic3r/PrintConfig.cpp:2994
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "Temizleme kulesinin sol ön köşesinin Y koordinatı"

#: src/libslic3r/PrintConfig.cpp:3001
msgid "Width of a wipe tower"
msgstr "Temizleme kulesinin genişliği"

#: src/libslic3r/PrintConfig.cpp:3007
msgid "Wipe tower rotation angle"
msgstr "Temizleme Kulesi dönme açısı"

#: src/libslic3r/PrintConfig.cpp:3008
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr "X eksenine göre temizleme kulesi dönme açısı."

#: src/libslic3r/PrintConfig.cpp:3014 src/libslic3r/PrintConfig.cpp:3015
msgid "Wipe tower brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3023
msgid "Wipe into this object's infill"
msgstr "Bu nesnenin dolgusu içinde temizlik işlemi yap"

#: src/libslic3r/PrintConfig.cpp:3024
msgid ""
"Purging after toolchange will be done inside this object's infills. This "
"lowers the amount of waste but may result in longer print time  due to "
"additional travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3031
msgid "Wipe into this object"
msgstr "Bu nesneye sil"

#: src/libslic3r/PrintConfig.cpp:3032
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"Alet değişiminden sonra, temizleme kulesinde bitecek ve baskı süresini "
"azaltacak malzemeden tasarruf etmek üzere nozülü temizlemek için nesne "
"kullanılacaktır. Sonuç olarak nesnelerin renkleri karışacaktır."

#: src/libslic3r/PrintConfig.cpp:3038
msgid "Maximal bridging distance"
msgstr "En fazla köprüleme mesafesi"

#: src/libslic3r/PrintConfig.cpp:3039
msgid "Maximal distance between supports on sparse infill sections."
msgstr "Seyrek dolgu bölümlerinde destekler arasındaki azami mesafe."

#: src/libslic3r/PrintConfig.cpp:3045
msgid "XY Size Compensation"
msgstr "XY Boyut Telafisi"

#: src/libslic3r/PrintConfig.cpp:3047
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"Nesne, XY düzleminde yapılandırılmış değerle büyütülecek / küçültülecektir "
"(negatif = içe, pozitif = dışarı doğru). Bu, ince ayar delik boyutları için "
"yararlı olabilir."

#: src/libslic3r/PrintConfig.cpp:3055
msgid "Z offset"
msgstr "Z ofset"

#: src/libslic3r/PrintConfig.cpp:3056
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"Bu değer G-code listesindeki tüm Z koordinatlarına eklenecek (veya "
"çıkartılacak). Hatalı Z limit anahtarı konumunu telafi etmek için "
"kullanılır: örneğin, limit anahtarı gerçekte nozülü tabladan 0.3 mm uzakta "
"bırakırsa, bunu -0.3 olarak ayarlayın (veya bu değeri 0 yapıp limit "
"anahtarınızı ayarlayın)."

#: src/libslic3r/PrintConfig.cpp:3065
msgid "Perimeter generator"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3067
msgid ""
"Classic perimeter generator produces perimeters with constant extrusion "
"width and for very thin areas is used gap-fill. Arachne engine produces "
"perimeters with variable extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3073
msgid "Classic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3074
msgid "Arachne"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3079
msgid "Perimeter transition length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3081
msgid ""
"When transitioning between different numbers of perimeters as the part "
"becomes thinner, a certain amount of space is allotted to split or join the "
"perimeter segments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3089
msgid "Perimeter transitioning filter margin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3091
msgid ""
"Prevent transitioning back and forth between one extra perimeter and one "
"less. This margin extends the range of extrusion widths which follow to "
"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
"Increasing this margin reduces the number of transitions, which reduces the "
"number of extrusion starts/stops and travel time. However, large extrusion "
"width variation can lead to under- or overextrusion problems. If expressed "
"as a percentage (for example 25%), it will be computed based on the nozzle "
"diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3104
msgid "Perimeter transitioning threshold angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3106
msgid ""
"When to create transitions between even and odd numbers of perimeters. A "
"wedge shape with an angle greater than this setting will not have "
"transitions and no perimeters will be printed in the center to fill the "
"remaining space. Reducing this setting reduces the number and length of "
"these center perimeters, but may leave gaps or overextrude."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3117
msgid "Perimeter distribution count"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3119
msgid ""
"The number of perimeters, counted from the center, over which the variation "
"needs to be spread. Lower values mean that the outer perimeters don't change "
"in width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3126
msgid "Split middle perimeter threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3128
msgid ""
"The smallest extrusion width, as a factor of the normal extrusion width, "
"above which the middle perimeter (if there is one) will be split into two. "
"Reduce this setting to use more, thinner perimeters. Increase to use fewer, "
"wider perimeters. Note that this applies -as if- the entire shape should be "
"filled with perimeter, so the middle here refers to the middle of the object "
"between two outer edges of the shape, even if there actually is infill or "
"other extrusion types in the print instead of the perimeter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3141
msgid "Add middle perimeter threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3143
msgid ""
"The smallest extrusion width, as a factor of the normal extrusion width, "
"above which a middle perimeter (if there wasn't one already) will be added. "
"Reduce this setting to use more, thinner perimeters. Increase to use fewer, "
"wider perimeters. Note that this applies -as if- the entire shape should be "
"filled with perimeter, so the middle here refers to the middle of the object "
"between two outer edges of the shape, even if there actually is infill or "
"other extrusion types in the print instead of the perimeter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3156
msgid "Minimum feature size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3158
msgid ""
"Minimum thickness of thin features. Model features that are thinner than "
"this value will not be printed, while features thicker than the Minimum "
"feature size will be widened to the Minimum perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3167
msgid "Minimum perimeter width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3169
msgid ""
"Width of the perimeter that will replace thin features (according to the "
"Minimum feature size) of the model. If the Minimum perimeter width is "
"thinner than the thickness of the feature, the perimeter will become as "
"thick as the feature itself. If expressed as a percentage (for example 85%), "
"it will be computed based on the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3237
msgid "Display width"
msgstr "Ekran genişliği"

#: src/libslic3r/PrintConfig.cpp:3238
msgid "Width of the display"
msgstr "Ekranın genişliği"

#: src/libslic3r/PrintConfig.cpp:3243
msgid "Display height"
msgstr "Ekran yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3244
msgid "Height of the display"
msgstr "Ekran yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3249
msgid "Number of pixels in"
msgstr "Piksel sayısı"

#: src/libslic3r/PrintConfig.cpp:3251
msgid "Number of pixels in X"
msgstr "X'teki piksel sayısı"

#: src/libslic3r/PrintConfig.cpp:3257
msgid "Number of pixels in Y"
msgstr "Y cinsinden piksel sayısı"

#: src/libslic3r/PrintConfig.cpp:3262
msgid "Display horizontal mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3263
msgid "Mirror horizontally"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3264
msgid "Enable horizontal mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3269
msgid "Display vertical mirroring"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3270
msgid "Mirror vertically"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3271
msgid "Enable vertical mirroring of output images"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3276
msgid "Display orientation"
msgstr "Ekran yönü"

#: src/libslic3r/PrintConfig.cpp:3277
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"SLA yazıcısının içindeki LCD ekran yönünü ayarlayın. Portre modu, ekran "
"genişliği ve yükseklik parametrelerinin anlamını değiştirecek ve çıkış "
"görüntüleri 90 derece döndürülecektir."

#: src/libslic3r/PrintConfig.cpp:3283
msgid "Landscape"
msgstr "Peyzaj"

#: src/libslic3r/PrintConfig.cpp:3284
msgid "Portrait"
msgstr "Portre"

#: src/libslic3r/PrintConfig.cpp:3289 src/libslic3r/PrintConfig.cpp:3924
msgid "Fast"
msgstr "Hızlı"

#: src/libslic3r/PrintConfig.cpp:3290
msgid "Fast tilt"
msgstr "Hızlı eğim"

#: src/libslic3r/PrintConfig.cpp:3291
msgid "Time of the fast tilt"
msgstr "Hızlı yatırma zamanı"

#: src/libslic3r/PrintConfig.cpp:3298 src/libslic3r/PrintConfig.cpp:3923
msgid "Slow"
msgstr "Yavaş"

#: src/libslic3r/PrintConfig.cpp:3299
msgid "Slow tilt"
msgstr "Yavaş eğim"

#: src/libslic3r/PrintConfig.cpp:3300
msgid "Time of the slow tilt"
msgstr "Yavaş yatırma zamanı"

#: src/libslic3r/PrintConfig.cpp:3307 src/libslic3r/PrintConfig.cpp:3925
msgid "High viscosity"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3308
msgid "Tilt for high viscosity resin"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3309
msgid "Time of the super slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3316
msgid "Area fill"
msgstr "Alan dolgusu"

#: src/libslic3r/PrintConfig.cpp:3317
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"Tabla alanının yüzdesi.\n"
"Baskı alanı belirtilen değeri aşarsa,\n"
"yavaş eğim kullanılır, aksi takdirde - hızlı eğim kullanılır"

#: src/libslic3r/PrintConfig.cpp:3324 src/libslic3r/PrintConfig.cpp:3325
#: src/libslic3r/PrintConfig.cpp:3326
msgid "Printer scaling correction"
msgstr "Yazıcı ölçeklendirme düzeltmesi"

#: src/libslic3r/PrintConfig.cpp:3332 src/libslic3r/PrintConfig.cpp:3334
msgid "Printer scaling correction in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3333
msgid "Printer scaling X axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3340 src/libslic3r/PrintConfig.cpp:3342
msgid "Printer scaling correction in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3341
msgid "Printer scaling Y axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3348 src/libslic3r/PrintConfig.cpp:3350
msgid "Printer scaling correction in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3349
msgid "Printer scaling Z axis correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3356 src/libslic3r/PrintConfig.cpp:3357
msgid "Printer absolute correction"
msgstr "Yazıcı mutlak düzeltme"

#: src/libslic3r/PrintConfig.cpp:3358
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""
"Dilimlenen 2D poligonları düzeltme işaretine göre şişirecek veya "
"söndürecektir."

#: src/libslic3r/PrintConfig.cpp:3364
msgid "Elephant foot minimum width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3366
msgid ""
"Minimum width of features to maintain when doing elephant foot compensation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3373 src/libslic3r/PrintConfig.cpp:3374
msgid "Printer gamma correction"
msgstr "Yazıcı gama düzeltmesi"

#: src/libslic3r/PrintConfig.cpp:3375
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""
"Pikselleştirilmiş 2B poligonlara bir gama düzeltmesi uygulayacaktır. Sıfır "
"gamma değeri, ortadaki eşik ile eşik anlamına gelir. Bu davranış, "
"çokgenlerde delik kaybetmeden kenar bozulmalarını ortadan kaldırır."

#: src/libslic3r/PrintConfig.cpp:3394 src/libslic3r/PrintConfig.cpp:3395
msgid "SLA material type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3406 src/libslic3r/PrintConfig.cpp:3407
msgid "Initial layer height"
msgstr "İlk katman yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3413 src/libslic3r/PrintConfig.cpp:3414
msgid "Bottle volume"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3415
msgid "ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3420 src/libslic3r/PrintConfig.cpp:3421
msgid "Bottle weight"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3422
msgid "kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3429
msgid "g/ml"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3436
msgid "money/bottle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3441
msgid "Faded layers"
msgstr "Soluk katmanlar"

#: src/libslic3r/PrintConfig.cpp:3442
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""
"Maruz kalma süresi için gereken katman sayısı, ilk maruz kalma süresinden "
"maruz kalma süresine kadar kaybolur"

#: src/libslic3r/PrintConfig.cpp:3449 src/libslic3r/PrintConfig.cpp:3450
msgid "Minimum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3457 src/libslic3r/PrintConfig.cpp:3458
msgid "Maximum exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3465 src/libslic3r/PrintConfig.cpp:3466
msgid "Exposure time"
msgstr "Pozlama süresi"

#: src/libslic3r/PrintConfig.cpp:3472 src/libslic3r/PrintConfig.cpp:3473
msgid "Minimum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3480 src/libslic3r/PrintConfig.cpp:3481
msgid "Maximum initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3488 src/libslic3r/PrintConfig.cpp:3489
msgid "Initial exposure time"
msgstr "İlk maruz kalma süresi"

#: src/libslic3r/PrintConfig.cpp:3495 src/libslic3r/PrintConfig.cpp:3496
msgid "Correction for expansion"
msgstr "Genişleme için düzeltme"

#: src/libslic3r/PrintConfig.cpp:3502 src/libslic3r/PrintConfig.cpp:3503
msgid "Correction for expansion in X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3509 src/libslic3r/PrintConfig.cpp:3510
msgid "Correction for expansion in Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3516 src/libslic3r/PrintConfig.cpp:3517
msgid "Correction for expansion in Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3523
msgid "SLA print material notes"
msgstr "SLA baskı malzemesi notları"

#: src/libslic3r/PrintConfig.cpp:3524
msgid "You can put your notes regarding the SLA print material here."
msgstr "SLA baskı malzemesi ile ilgili notlarınızı buraya yazabilirsiniz."

#: src/libslic3r/PrintConfig.cpp:3536 src/libslic3r/PrintConfig.cpp:3547
msgid "Default SLA material profile"
msgstr "Varsayılan SLA malzeme profili"

#: src/libslic3r/PrintConfig.cpp:3558
msgid "Generate supports"
msgstr "Destek üret"

#: src/libslic3r/PrintConfig.cpp:3560
msgid "Generate supports for the models"
msgstr "Modeller için destek oluşturun"

#: src/libslic3r/PrintConfig.cpp:3565
msgid "Pinhead front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3567
msgid "Diameter of the pointing side of the head"
msgstr "Başın gösterdiği tarafın çapı"

#: src/libslic3r/PrintConfig.cpp:3574
msgid "Head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3576
msgid "How much the pinhead has to penetrate the model surface"
msgstr "Pinheadin model yüzeyine ne kadar nüfuz etmesi gerektiği"

#: src/libslic3r/PrintConfig.cpp:3583
msgid "Pinhead width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3585
msgid "Width from the back sphere center to the front sphere center"
msgstr "Arka küre merkezinden ön küre merkezine genişlik"

#: src/libslic3r/PrintConfig.cpp:3593
msgid "Pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3595
msgid "Diameter in mm of the support pillars"
msgstr "Destek direklerinin mm cinsinden çapı"

#: src/libslic3r/PrintConfig.cpp:3603
msgid "Small pillar diameter percent"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3605
msgid ""
"The percentage of smaller pillars compared to the normal pillar diameter "
"which are used in problematic areas where a normal pilla cannot fit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3614
msgid "Max bridges on a pillar"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3616
msgid ""
"Maximum number of bridges that can be placed on a pillar. Bridges hold "
"support point pinheads and connect to pillars as small branches."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3624
msgid "Pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3625
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"İki komşu sütun arasındaki köprü tipini kontrol eder. İki sütunun mesafesine "
"bağlı olarak otomatik olarak ilk ikisi arasında geçiş yapacak zig-zag, "
"çapraz (çift zig-zag) veya dinamik olabilir."

#: src/libslic3r/PrintConfig.cpp:3633
msgid "Zig-Zag"
msgstr "Zikzaklı"

#: src/libslic3r/PrintConfig.cpp:3634
msgid "Cross"
msgstr "Çapraz"

#: src/libslic3r/PrintConfig.cpp:3635
msgid "Dynamic"
msgstr "Dinamik"

#: src/libslic3r/PrintConfig.cpp:3647
msgid "Pillar widening factor"
msgstr "Ayağı genişletme faktörü"

#: src/libslic3r/PrintConfig.cpp:3649
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""
"Köprüler veya sütunların başka bir sütunla birleştirilmesi yarıçapı "
"artırabilir. Sıfır, artış yok demektir, biri tam artış demektir."

#: src/libslic3r/PrintConfig.cpp:3658
msgid "Support base diameter"
msgstr "Destek taban çapı"

#: src/libslic3r/PrintConfig.cpp:3660
msgid "Diameter in mm of the pillar base"
msgstr "Sütun tabanının mm cinsinden çapı"

#: src/libslic3r/PrintConfig.cpp:3668
msgid "Support base height"
msgstr "Destek taban yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3670
msgid "The height of the pillar base cone"
msgstr "Sütun tabanı konisinin yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3677
msgid "Support base safety distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3680
msgid ""
"The minimum distance of the pillar base from the model in mm. Makes sense in "
"zero elevation mode where a gap according to this parameter is inserted "
"between the model and the pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3690
msgid "Critical angle"
msgstr "Kritik açı"

#: src/libslic3r/PrintConfig.cpp:3692
msgid "The default angle for connecting support sticks and junctions."
msgstr "Destek çubuklarını ve bağlantılarını bağlamak için varsayılan açı."

#: src/libslic3r/PrintConfig.cpp:3700
msgid "Max bridge length"
msgstr "En fazla köprü uzunluğu"

#: src/libslic3r/PrintConfig.cpp:3702
msgid "The max length of a bridge"
msgstr "Bir köprünün en fazla uzunluğu"

#: src/libslic3r/PrintConfig.cpp:3709
msgid "Max pillar linking distance"
msgstr "Max sütun bağlama mesafesi"

#: src/libslic3r/PrintConfig.cpp:3711
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""
"Birbiriyle bağlantı kurması için iki sütunun en fazla mesafesi. Sıfır "
"değeri, direk basamaklandırmasını yasaklar."

#: src/libslic3r/PrintConfig.cpp:3721
msgid ""
"How much the supports should lift up the supported object. If \"Pad around "
"object\" is enabled, this value is ignored."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3732
msgid "This is a relative measure of support points density."
msgstr "Bu, destek noktalarının yoğunluğunun göreceli bir ölçüsüdür."

#: src/libslic3r/PrintConfig.cpp:3738
msgid "Minimal distance of the support points"
msgstr "Destek noktalarının en düşük mesafesi"

#: src/libslic3r/PrintConfig.cpp:3740
msgid "No support points will be placed closer than this threshold."
msgstr "Bu eşikten daha yakın hiçbir destek noktası yerleştirilmeyecektir."

#: src/libslic3r/PrintConfig.cpp:3746
msgid "Use pad"
msgstr "Ped kullan"

#: src/libslic3r/PrintConfig.cpp:3748
msgid "Add a pad underneath the supported model"
msgstr "Desteklenen modelin altına bir ped ekler"

#: src/libslic3r/PrintConfig.cpp:3753
msgid "Pad wall thickness"
msgstr "Ped duvar kalınlığı"

#: src/libslic3r/PrintConfig.cpp:3755
msgid "The thickness of the pad and its optional cavity walls."
msgstr "Pedin kalınlığı ve isteğe bağlı boşluk duvarları."

#: src/libslic3r/PrintConfig.cpp:3763
msgid "Pad wall height"
msgstr "Ped duvar yüksekliği"

#: src/libslic3r/PrintConfig.cpp:3764
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""
"Ped boşluğu derinliğini tanımlar. Boşluğu devre dışı bırakmak için sıfıra "
"ayarlayın. Bu özelliği etkinleştirirken dikkatli olun, çünkü bazı reçineler "
"boşluğun içinde aşırı bir emme etkisi oluşturabilir ve bu da baskıyı "
"ayırmayı zorlaştırır."

#: src/libslic3r/PrintConfig.cpp:3777
msgid "Pad brim size"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3778
msgid "How far should the pad extend around the contained geometry"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3788
msgid "Max merge distance"
msgstr "En fazla birleştirme mesafesi"

#: src/libslic3r/PrintConfig.cpp:3790
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"Bazı nesneler, tek bir büyük bir tane yerine birkaç daha küçük pedle "
"birlikte olabilir. Bu parametre iki küçük pedin ortasının ne kadar uzakta "
"olması gerektiğini tanımlar. Yaklaşırlarsa, bir pede birleştirilirler."

#: src/libslic3r/PrintConfig.cpp:3810
msgid "Pad wall slope"
msgstr "Ped duvar eğimi"

#: src/libslic3r/PrintConfig.cpp:3812
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""
"Ped duvarının tabla düzlemine göre eğimi. 90 derece, düz duvarlar anlamına "
"gelir."

#: src/libslic3r/PrintConfig.cpp:3823
msgid "Create pad around object and ignore the support elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3828
msgid "Pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3830
msgid "Force pad around object everywhere"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3835
msgid "Pad object gap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3837
msgid ""
"The gap between the object bottom and the generated pad in zero elevation "
"mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3846
msgid "Pad object connector stride"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3848
msgid ""
"Distance between two connector sticks which connect the object and the "
"generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3855
msgid "Pad object connector width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3857
msgid ""
"Width of the connector sticks which connect the object and the generated pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3864
msgid "Pad object connector penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3867
msgid "How much should the tiny connectors penetrate into the model body."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3874
msgid "Enable hollowing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3876
msgid "Hollow out a model to have an empty interior"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3881
msgid "Wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3883
msgid "Minimum wall thickness of a hollowed model."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3891
msgid "Accuracy"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3893
msgid ""
"Performance vs accuracy of calculation. Lower values may produce unwanted "
"artifacts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3903
msgid ""
"Hollowing is done in two steps: first, an imaginary interior is calculated "
"deeper (offset plus the closing distance) in the object and then it's "
"inflated back to the specified offset. A greater closing distance makes the "
"interior more rounded. At zero, the interior will resemble the exterior the "
"most."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3915
msgid "Print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3917
msgid ""
"A slower printing profile might be necessary when using materials with "
"higher viscosity or with some hollowed parts. It slows down the tilt "
"movement and adds a delay before exposure."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4383
msgid "Export OBJ"
msgstr "OBJ olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4384
msgid "Export the model(s) as OBJ."
msgstr "Model(ler)i OBJ olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4395
msgid "Export SLA"
msgstr "SLA olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4396
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""
"Modeli dilimleyin ve SLA yazdırma katmanlarını PNG olarak dışa aktarın."

#: src/libslic3r/PrintConfig.cpp:4401
msgid "Export 3MF"
msgstr "3MF Olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4402
msgid "Export the model(s) as 3MF."
msgstr "Model(ler)i 3MF olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4406
msgid "Export AMF"
msgstr "AMF Olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4407
msgid "Export the model(s) as AMF."
msgstr "Model(ler)i AMF olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4411
msgid "Export STL"
msgstr "STL olarak Dışa Aktar"

#: src/libslic3r/PrintConfig.cpp:4412
msgid "Export the model(s) as STL."
msgstr "Model(ler)i STL olarak dışa aktar."

#: src/libslic3r/PrintConfig.cpp:4417
msgid "Slice the model and export toolpaths as G-code."
msgstr "Modeli dilimleyin ve takım yollarını G kodu olarak dışa aktarın."

#: src/libslic3r/PrintConfig.cpp:4422
msgid "G-code viewer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4423
msgid "Visualize an already sliced and saved G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4428
msgid "Slice"
msgstr "Dilim"

#: src/libslic3r/PrintConfig.cpp:4429
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""
"Modeli, printer_technology yapılandırma değerine göre FFF veya SLA olarak "
"dilimleyin."

#: src/libslic3r/PrintConfig.cpp:4434
msgid "Help"
msgstr "Yardım"

#: src/libslic3r/PrintConfig.cpp:4435
msgid "Show this help."
msgstr "Bu yardımı göster."

#: src/libslic3r/PrintConfig.cpp:4440
msgid "Help (FFF options)"
msgstr "Yardım (FFF seçenekleri)"

#: src/libslic3r/PrintConfig.cpp:4441
msgid "Show the full list of print/G-code configuration options."
msgstr "Baskı/G-code yapılandırma seçeneklerinin tam listesini göster."

#: src/libslic3r/PrintConfig.cpp:4445
msgid "Help (SLA options)"
msgstr "Yardım (SLA seçenekleri)"

#: src/libslic3r/PrintConfig.cpp:4446
msgid "Show the full list of SLA print configuration options."
msgstr "SLA yazdırma yapılandırma seçeneklerinin tam listesini göster."

#: src/libslic3r/PrintConfig.cpp:4450
msgid "Output Model Info"
msgstr "Çıktı Model Bilgisi"

#: src/libslic3r/PrintConfig.cpp:4451
msgid "Write information about the model to the console."
msgstr "Modelle ilgili bilgileri konsola yazın."

#: src/libslic3r/PrintConfig.cpp:4455
msgid "Save config file"
msgstr "Konfigürasyon dosyasını kaydet"

#: src/libslic3r/PrintConfig.cpp:4456
msgid "Save configuration to the specified file."
msgstr "Yapılandırmayı belirtilen dosyaya kaydeder."

#: src/libslic3r/PrintConfig.cpp:4466
msgid "Align XY"
msgstr "XY'yi Hizala"

#: src/libslic3r/PrintConfig.cpp:4467
msgid "Align the model to the given point."
msgstr "Modeli verilen noktaya hizala."

#: src/libslic3r/PrintConfig.cpp:4472
msgid "Cut model at the given Z."
msgstr "Modeli belirtilen Z seviyesinden kes."

#: src/libslic3r/PrintConfig.cpp:4493
msgid "Center"
msgstr "Merkez"

#: src/libslic3r/PrintConfig.cpp:4494
msgid "Center the print around the given center."
msgstr "Baskıyı verilen merkezin çevresine ortala."

#: src/libslic3r/PrintConfig.cpp:4498
msgid "Don't arrange"
msgstr "Düzenleme"

#: src/libslic3r/PrintConfig.cpp:4499
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""
"Birleştirmeden ve orijinal XY koordinatlarını saklamadan modelleri yeniden "
"düzenleme."

#: src/libslic3r/PrintConfig.cpp:4502
msgid "Ensure on bed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4503
msgid ""
"Lift the object above the bed when it is partially below. Enabled by "
"default, use --no-ensure-on-bed to disable."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4507
msgid "Duplicate"
msgstr "Çoğalt"

#: src/libslic3r/PrintConfig.cpp:4508
msgid "Multiply copies by this factor."
msgstr "Kopyaları bu faktörle çarpın."

#: src/libslic3r/PrintConfig.cpp:4512
msgid "Duplicate by grid"
msgstr "Kılavuza göre çoğalt"

#: src/libslic3r/PrintConfig.cpp:4513
msgid "Multiply copies by creating a grid."
msgstr "Izgara oluşturarak kopyaları çarpın."

#: src/libslic3r/PrintConfig.cpp:4517
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"Tedarik edilen modelleri bir plaka içinde düzenleyin ve bir kez işlem yapmak "
"için bunları tek bir modelde birleştirin."

#: src/libslic3r/PrintConfig.cpp:4522
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"Herhangi bir manifold olmayan örgüyü onarmaya çalışın (bu seçenek, istenen "
"eylemi gerçekleştirmek için modeli dilimlememiz gerektiğinde dolaylı olarak "
"eklenir)."

#: src/libslic3r/PrintConfig.cpp:4526
msgid "Rotation angle around the Z axis in degrees."
msgstr "Z ekseni etrafındaki dönüş açısı, derece olarak."

#: src/libslic3r/PrintConfig.cpp:4530
msgid "Rotate around X"
msgstr "X etrafında döndür"

#: src/libslic3r/PrintConfig.cpp:4531
msgid "Rotation angle around the X axis in degrees."
msgstr "X ekseni etrafındaki dönüş açısı, derece olarak."

#: src/libslic3r/PrintConfig.cpp:4535
msgid "Rotate around Y"
msgstr "Y etrafında döndür"

#: src/libslic3r/PrintConfig.cpp:4536
msgid "Rotation angle around the Y axis in degrees."
msgstr "Y ekseni etrafındaki dönüş açısı, derece olarak."

#: src/libslic3r/PrintConfig.cpp:4541
msgid "Scaling factor or percentage."
msgstr "Ölçekleme faktörü veya yüzdesi."

#: src/libslic3r/PrintConfig.cpp:4546
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""
"Modellerde bağlı olmayan parçaları tespit et ve bunları ayrı nesnelere böl."

#: src/libslic3r/PrintConfig.cpp:4549
msgid "Scale to Fit"
msgstr "Uygun ölçek"

#: src/libslic3r/PrintConfig.cpp:4550
msgid "Scale to fit the given volume."
msgstr "Verilen hacme uyması için ölçeklendirin."

#: src/libslic3r/PrintConfig.cpp:4559
msgid "Ignore non-existent config files"
msgstr "Var olmayan config dosyalarını yoksay"

#: src/libslic3r/PrintConfig.cpp:4560
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "Do not fail if a file supplied to --load does not exist."

#: src/libslic3r/PrintConfig.cpp:4563
msgid ""
"Forward-compatibility rule when loading configurations from config files and "
"project files (3MF, AMF)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4564
msgid ""
"This version of PrusaSlicer may not understand configurations produced by "
"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
"the list of supported firmware flavors. One may decide to bail out or to "
"substitute an unknown value with a default silently or verbosely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4571
msgid "Bail out on unknown configuration values"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4572
msgid ""
"Enable reading unknown configuration values by verbosely substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4573
msgid ""
"Enable reading unknown configuration values by silently substituting them "
"with defaults."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4577
msgid "Load config file"
msgstr "Konfigürasyon dosyası yükle"

#: src/libslic3r/PrintConfig.cpp:4578
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""
"Belirtilen dosyadan yapılandırmayı yükle. Seçenekleri birden fazla dosyadan "
"yüklemek için birden fazla kez kullanılabilir."

#: src/libslic3r/PrintConfig.cpp:4581
msgid "Output File"
msgstr "Çıktı dosyası"

#: src/libslic3r/PrintConfig.cpp:4582
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""
"Çıktının yazılacağı dosya (belirtilmemişse girdi dosyasına dayanacaktır)."

#: src/libslic3r/PrintConfig.cpp:4586
msgid "Single instance mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4587
msgid ""
"If enabled, the command line arguments are sent to an existing instance of "
"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
"the \"single_instance\" configuration value from application preferences."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4598
msgid "Data directory"
msgstr "Veri dizini"

#: src/libslic3r/PrintConfig.cpp:4599
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"Ayarları verilen dizine yükleyin ve saklayın. Bu, farklı profilleri korumak "
"için veya bir ağ depolama birimindeki yapılandırmaları dahil etmek için "
"kullanışlıdır."

#: src/libslic3r/PrintConfig.cpp:4602
msgid "Logging level"
msgstr "Günlük seviyesi"

#: src/libslic3r/PrintConfig.cpp:4603
msgid ""
"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
"trace\n"
"For example. loglevel=2 logs fatal, error and warning level messages."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:4609
msgid "Render with a software renderer"
msgstr "Bir yazılım oluşturucuyla işleme"

#: src/libslic3r/PrintConfig.cpp:4610
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""
"Bir yazılım oluşturucuyla renderleyin. Birlikte verilen MESA yazılım "
"oluşturucusu, varsayılan OpenGL sürücüsü yerine yüklenir."

#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr "Zip arşivinde hata"

#: src/libslic3r/PrintObject.cpp:126
msgid "Generating perimeters"
msgstr "Duvar oluşturma"

#: src/libslic3r/PrintObject.cpp:229
msgid "Preparing infill"
msgstr "Dolgu hazırlama"

#: src/libslic3r/PrintObject.cpp:403
msgid "Generating support material"
msgstr "Destek oluşturma"

#: resources/data/hints.ini: [hint:Fuzzy skin]
msgid ""
"Fuzzy skin\n"
"Did you know that you can create rough fibre-like texture on the sides of "
"your models using the<a>Fuzzy skin</a>feature? You can also use modifiers to "
"apply fuzzy-skin only to a portion of your model."
msgstr ""

#: resources/data/hints.ini: [hint:Shapes gallery]
msgid ""
"Shapes gallery\n"
"Did you know that PrusaSlicer has a Shapes Gallery? You can use the included "
"models as modifiers, negative volumes or as printable objects. Right-click "
"the platter and select<a>Add Shape - Gallery</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Arrange settings]
msgid ""
"Arrange settings\n"
"Did you know that you can right-click the<a>Arrange icon</a>to adjust the "
"size of the gap between objects and to allow automatic rotations?"
msgstr ""

#: resources/data/hints.ini: [hint:Negative volume]
msgid ""
"Negative volume\n"
"Did you know that you can subtract one mesh from another using the Negative "
"volume modifier? That way you can, for example, create easily resizable "
"holes directly in PrusaSlicer. Read more in the documentation. (Requires "
"Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Simplify mesh]
msgid ""
"Simplify mesh\n"
"Did you know that you can reduce the number of triangles in a mesh using the "
"Simplify mesh feature? Right-click the model and select Simplify model. Read "
"more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Reload from disk]
msgid ""
"Reload from disk\n"
"Did you know that if you created a newer version of your model, you can "
"simply reload it in PrusaSlicer? Right-click the model in the 3D view and "
"choose Reload from disk. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Hiding sidebar]
msgid ""
"Hiding sidebar\n"
"Did you know that you can hide the right sidebar using the shortcut <b>Shift"
"+Tab</b>? You can also enable the icon for this from the<a>Preferences</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Perspective camera]
msgid ""
"Perspective camera\n"
"Did you know that you can use the <b>K</b> key to quickly switch between an "
"orthographic and perspective camera?"
msgstr ""

#: resources/data/hints.ini: [hint:Camera Views]
msgid ""
"Camera Views\n"
"Did you know that you can use the number keys <b>0-6</b> to quickly switch "
"between predefined camera angles?"
msgstr ""

#: resources/data/hints.ini: [hint:Place on face]
msgid ""
"Place on face\n"
"Did you know that you can quickly orient a model so that one of its faces "
"sits on the print bed? Select the<a>Place on face</a>function or press the "
"<b>F</b> key."
msgstr ""

#: resources/data/hints.ini: [hint:Set number of instances]
msgid ""
"Set number of instances\n"
"Did you know that you can right-click a model and set an exact number of "
"instances instead of copy-pasting it several times?"
msgstr ""

#: resources/data/hints.ini: [hint:Combine infill]
msgid ""
"Combine infill\n"
"Did you know that you can print the infill with a higher layer height "
"compared to perimeters to save print time using the setting<a>Combine infill "
"every</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Variable layer height]
msgid ""
"Variable layer height\n"
"Did you know that you can print different regions of your model with a "
"different layer height and smooth the transitions between them? Try "
"the<a>Variable layer height tool</a>. (Not available for SLA printers.)"
msgstr ""

#: resources/data/hints.ini: [hint:Undo/redo history]
msgid ""
"Undo/redo history\n"
"Did you know that you can right-click the<a>undo/redo arrows</a>to see the "
"history of changes and to undo or redo several actions at once?"
msgstr ""

#: resources/data/hints.ini: [hint:Different layer height for each model]
msgid ""
"Different layer height for each model\n"
"Did you know that you can print each model on the plater with a different "
"layer height? Right-click the model in the 3D view, choose Layers and "
"Perimeters and adjust the values in the right panel. Read more in the "
"documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Solid infill threshold area]
msgid ""
"Solid infill threshold area\n"
"Did you know that you can make parts of your model with a small cross-"
"section be filled with solid infill automatically? Set the<a>Solid infill "
"threshold area</a>. (Expert mode only.)"
msgstr ""

#: resources/data/hints.ini: [hint:Search functionality]
msgid ""
"Search functionality\n"
"Did you know that you use the<a>Search</a>tool to quickly find a specific "
"PrusaSlicer setting? Or use the familiar shortcut <b>Ctrl+F</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Box selection]
msgid ""
"Box selection\n"
"Did you know that you can do a box selection with Shift+Mouse drag? You can "
"also box-deselect objects with <b>Alt+Mouse drag</b>."
msgstr ""

#: resources/data/hints.ini: [hint:Zoom on selected objects or all if none
#: selected]
msgid ""
"Zoom on selected objects or on all objects if none selected\n"
"Did you know that you can zoom in on selected objects by pressing the <b>Z</"
"b> key? If none are selected, the camera will zoom on all objects in the "
"scene."
msgstr ""

#: resources/data/hints.ini: [hint:Printable toggle]
msgid ""
"Printable toggle\n"
"Did you know that you can disable the G-code generation for the selected "
"model without having to move or delete it? Toggle the Printable property of "
"a model from the Right-click context menu."
msgstr ""

#: resources/data/hints.ini: [hint:Mirror]
msgid ""
"Mirror\n"
"Did you know that you can mirror the selected model to create a reversed "
"version of it? Right-click the model, select Mirror and pick the mirror axis."
msgstr ""

#: resources/data/hints.ini: [hint:PageUp / PageDown quick rotation by 45
#: degrees]
msgid ""
"PageUp / PageDown quick rotation by 45 degrees\n"
"Did you know that you can quickly rotate selected models by 45 degrees "
"around the Z-axis clockwise or counter-clockwise by pressing <b>Page Up</b> "
"or <b>Page Down</b> respectively?"
msgstr ""

#: resources/data/hints.ini: [hint:Load config from G-code]
msgid ""
"Load config from G-code\n"
"Did you know that you can use File-Import-Import Config to load print, "
"filament and printer profiles from an existing G-code file? Similarly, you "
"can use File-Import-Import SL1 / SL1S archive, which also lets you "
"reconstruct 3D models from the voxel data."
msgstr ""

#: resources/data/hints.ini: [hint:Ironing]
msgid ""
"Ironing\n"
"Did you know that you can smooth top surfaces of prints using Ironing? The "
"nozzle will run a special second infill phase at the same layer to fill in "
"holes and flatten any lifted plastic. Read more in the documentation. "
"(Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on supports]
msgid ""
"Paint-on supports\n"
"Did you know that you can paint directly on the object and select areas, "
"where supports should be enforced or blocked? Try the<a>Paint-on supports</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Paint-on seam]
msgid ""
"Paint-on seam\n"
"Did you know that you can paint directly on the object and select where to "
"place the start/endpoint of each perimeter loop? Try the<a>Seam painting</"
"a>feature. (Requires Advanced or Expert mode.)"
msgstr ""

#: resources/data/hints.ini: [hint:Insert Pause]
msgid ""
"Insert Pause\n"
"Did you know that you can schedule the print to pause at a specific layer? "
"Right-click the layer slider in the Preview and select Add pause print "
"(M601). This can be used to insert magnets, weights or nuts into your "
"prints. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Insert Custom G-code]
msgid ""
"Insert Custom G-code\n"
"Did you know that you can insert a custom G-code at a specific layer? Left-"
"click the layer in the Preview, Right-click the plus icon and select Add "
"custom G-code. With this function you can, for example, create a temperature "
"tower. Read more in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Configuration snapshots]
msgid ""
"Configuration snapshots\n"
"Did you know that you can roll back to a complete backup of all system and "
"user profiles? You can view and move back and forth between snapshots using "
"the Configuration - <a>Configuration snapshots menu</a>."
msgstr ""

#: resources/data/hints.ini: [hint:Minimum shell thickness]
msgid ""
"Minimum shell thickness\n"
"Did you know that instead of the number of top and bottom layers, you can "
"define the<a>Minimum shell thickness</a>in millimeters? This feature is "
"especially useful when using the variable layer height function."
msgstr ""

#: resources/data/hints.ini: [hint:Settings in non-modal window]
msgid ""
"Settings in non-modal window\n"
"Did you know that you can open the Settings in a new non-modal window? This "
"means you can have settings open on one screen and the G-code Preview on the "
"other. Go to the<a>Preferences</a>and select Settings in non-modal window."
msgstr ""

#: resources/data/hints.ini: [hint:Adaptive infills]
msgid ""
"Adaptive infills\n"
"Did you know that you can use the Adaptive cubic and Support cubic infills "
"to decrease the print time and lower the filament consumption? Read more in "
"the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Lightning infill]
msgid ""
"Lightning infill\n"
"Did you know that you can use the Lightning infill to support only the top "
"surfaces, save a lot of the filament, and decrease the print time? Read more "
"in the documentation."
msgstr ""

#: resources/data/hints.ini: [hint:Fullscreen mode]
msgid ""
"Fullscreen mode\n"
"Did you know that you can switch PrusaSlicer to fullscreen mode? Use the "
"<b>F11</b> hotkey."
msgstr ""

#: ../src/common/debugrpt.cpp:586
msgid ""
"\n"
"Please send this report to the program maintainer, thank you!\n"
msgstr ""
"\n"
"Lütfen bu raporu program geliştiricisine gönderin, teşekkürler!\n"

#: ../src/richtext/richtextstyledlg.cpp:210
#: ../src/richtext/richtextstyledlg.cpp:222
msgid " "
msgstr " "

#: ../src/generic/dbgrptg.cpp:326
msgid "              Thank you and we're sorry for the inconvenience!\n"
msgstr "              Teşekkürler, yaşadığınız sorundan dolayı özür dileriz!\n"

#: ../src/common/prntbase.cpp:573
#, c-format
msgid " (copy %d of %d)"
msgstr " (kopya %d / %d)"

#: ../src/common/log.cpp:421
#, c-format
msgid " (error %ld: %s)"
msgstr " (hata %ld: %s)"

#: ../src/common/imagtiff.cpp:72
#, c-format
msgid " (in module \"%s\")"
msgstr " (\"%s\" modülünde)"

#: ../src/osx/core/secretstore.cpp:138
msgid " (while overwriting an existing item)"
msgstr " (varolan bir ögenin üzerine yazılırken)"

#: ../src/common/docview.cpp:1642
msgid " - "
msgstr " - "

#: ../src/richtext/richtextprint.cpp:593 ../src/html/htmprint.cpp:714
msgid " Preview"
msgstr " Önizleme"

#: ../src/common/fontcmn.cpp:824
msgid " bold"
msgstr " koyu"

#: ../src/common/fontcmn.cpp:840
msgid " italic"
msgstr " yatık"

#: ../src/common/fontcmn.cpp:820
msgid " light"
msgstr " açık"

#: ../src/common/fontcmn.cpp:807
msgid " strikethrough"
msgstr " üstü çizili"

#: ../src/common/paper.cpp:117
msgid "#10 Envelope, 4 1/8 x 9 1/2 in"
msgstr "#10 Zarf, 4 1/8 x 9 1/2 inç"

#: ../src/common/paper.cpp:118
msgid "#11 Envelope, 4 1/2 x 10 3/8 in"
msgstr "#11 Zarf, 4 1/2 x 10 3/8 inç"

#: ../src/common/paper.cpp:119
msgid "#12 Envelope, 4 3/4 x 11 in"
msgstr "#12 Zarf, 4 3/4 x 11 inç"

#: ../src/common/paper.cpp:120
msgid "#14 Envelope, 5 x 11 1/2 in"
msgstr "#14 Zarf, 5 x 11 1/2 inç"

#: ../src/common/paper.cpp:116
msgid "#9 Envelope, 3 7/8 x 8 7/8 in"
msgstr "#9 Zarf, 3 7/8 x 8 7/8 inç"

#: ../src/html/helpwnd.cpp:1031
#, c-format
msgid "%d of %lu"
msgstr "%d / %lu"

#: ../src/html/helpwnd.cpp:1678
#, c-format
msgid "%i of %u"
msgstr "%i / %u"

#: ../src/generic/filectrlg.cpp:279
#, c-format
msgid "%ld byte"
msgid_plural "%ld bytes"
msgstr[0] "%ld bayt"

#: ../src/html/helpwnd.cpp:1033
#, c-format
msgid "%lu of %lu"
msgstr "%lu / %lu"

#: ../src/generic/datavgen.cpp:6028
#, c-format
msgid "%s (%d items)"
msgstr "%s (%d öge)"

#: ../src/common/cmdline.cpp:1221
#, c-format
msgid "%s (or %s)"
msgstr "%s (ya da %s)"

#: ../src/generic/logg.cpp:224
#, c-format
msgid "%s Error"
msgstr "%s Hata"

#: ../src/generic/logg.cpp:236
#, c-format
msgid "%s Information"
msgstr "%s Bilgileri"

#: ../src/generic/preferencesg.cpp:113
#, c-format
msgid "%s Preferences"
msgstr "%s Ayarları"

#: ../src/generic/logg.cpp:228
#, c-format
msgid "%s Warning"
msgstr "%s Uyarı"

#: ../src/common/tarstrm.cpp:1319
#, c-format
msgid "%s did not fit the tar header for entry '%s'"
msgstr "%s '%s' kaydının tar başlığına sığmadı"

#: ../src/common/fldlgcmn.cpp:124
#, c-format
msgid "%s files (%s)|%s"
msgstr "%s dosya (%s)|%s"

#: ../src/html/helpwnd.cpp:1716
#, c-format
msgid "%u of %u"
msgstr "%u / %u"

#: ../src/common/stockitem.cpp:139
msgid "&About"
msgstr "H&akkında"

#: ../src/common/stockitem.cpp:207
msgid "&Actual Size"
msgstr "&Geçerli Boyut"

#: ../src/richtext/richtextindentspage.cpp:262
msgid "&After a paragraph:"
msgstr "P&aragraftan sonra:"

#: ../src/richtext/richtextindentspage.cpp:128
#: ../src/richtext/richtextliststylepage.cpp:319
msgid "&Alignment"
msgstr "Hiz&alama"

#: ../src/common/stockitem.cpp:141
msgid "&Apply"
msgstr "Uygul&a"

#: ../src/richtext/richtextstyledlg.cpp:251
msgid "&Apply Style"
msgstr "Biçemi Uygul&a"

#: ../src/msw/mdi.cpp:179
msgid "&Arrange Icons"
msgstr "Si&mgeleri Düzenle"

#: ../src/common/stockitem.cpp:195
msgid "&Ascending"
msgstr "&Artan"

#: ../src/common/stockitem.cpp:142
msgid "&Back"
msgstr "&Geri"

#: ../src/richtext/richtextstylepage.cpp:115
msgid "&Based on:"
msgstr "&Kaynak:"

#: ../src/richtext/richtextindentspage.cpp:253
msgid "&Before a paragraph:"
msgstr "&Paragraftan önce:"

#: ../src/richtext/richtextfontpage.cpp:262
msgid "&Bg colour:"
msgstr "&Art alan rengi:"

#: ../src/richtext/richtextbackgroundpage.cpp:298
msgid "&Blur distance:"
msgstr "&Bulanıklık uzaklığı:"

#: ../src/common/stockitem.cpp:143
msgid "&Bold"
msgstr "&Koyu"

#: ../src/common/stockitem.cpp:144
msgid "&Bottom"
msgstr "Al&t"

#: ../src/richtext/richtextborderspage.cpp:345
#: ../src/richtext/richtextborderspage.cpp:513
#: ../src/richtext/richtextmarginspage.cpp:259
#: ../src/richtext/richtextmarginspage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:637
#: ../src/richtext/richtextsizepage.cpp:644
msgid "&Bottom:"
msgstr "Al&t:"

#: ../include/wx/richtext/richtextbuffer.h:3866
msgid "&Box"
msgstr "&Kutu"

#: ../src/richtext/richtextliststylepage.cpp:210
#: ../src/richtext/richtextbulletspage.cpp:146
msgid "&Bullet style:"
msgstr "&Madde imi biçemi:"

#: ../src/common/stockitem.cpp:146
msgid "&CD-Rom"
msgstr "&CD-Rom"

#: ../src/generic/wizard.cpp:434 ../src/generic/fontdlgg.cpp:470
#: ../src/generic/fontdlgg.cpp:489 ../src/osx/carbon/fontdlg.cpp:402
#: ../src/common/dlgcmn.cpp:279 ../src/common/stockitem.cpp:145
msgid "&Cancel"
msgstr "İ&ptal"

#: ../src/msw/mdi.cpp:175
msgid "&Cascade"
msgstr "Arka arkaya &diz"

#: ../include/wx/richtext/richtextbuffer.h:5960
msgid "&Cell"
msgstr "&Hücre"

#: ../src/richtext/richtextsymboldlg.cpp:439
msgid "&Character code:"
msgstr "&Karakter kodu:"

#: ../src/common/stockitem.cpp:147
msgid "&Clear"
msgstr "T&emizle"

#: ../src/generic/logg.cpp:516 ../src/common/stockitem.cpp:148
#: ../src/common/prntbase.cpp:1600 ../src/univ/themes/win32.cpp:3756
msgid "&Close"
msgstr "&Kapat"

#: ../src/common/stockitem.cpp:193
msgid "&Color"
msgstr "&Renk"

#: ../src/richtext/richtextfontpage.cpp:249
msgid "&Colour:"
msgstr "&Renk:"

#: ../src/common/stockitem.cpp:149
msgid "&Convert"
msgstr "&Dönüştür"

#: ../src/generic/hyperlinkg.cpp:156
msgid "&Copy URL"
msgstr "İnternet Adresini K&opyala"

#: ../src/common/headerctrlcmn.cpp:306
msgid "&Customize..."
msgstr "Ö&zelleştir..."

#: ../src/generic/dbgrptg.cpp:334
msgid "&Debug report preview:"
msgstr "&Hata ayıklama raporu ön izlemesi:"

#: ../src/richtext/richtexttabspage.cpp:138
#: ../src/richtext/richtextctrl.cpp:335 ../src/osx/textctrl_osx.cpp:579
#: ../src/common/stockitem.cpp:152 ../src/msw/textctrl.cpp:2510
msgid "&Delete"
msgstr "&Sil"

#: ../src/richtext/richtextstyledlg.cpp:269
msgid "&Delete Style..."
msgstr "&Biçemi Sil..."

#: ../src/common/stockitem.cpp:196
msgid "&Descending"
msgstr "A&zalan"

#: ../src/generic/logg.cpp:682
msgid "&Details"
msgstr "&Ayrıntılar"

#: ../src/common/stockitem.cpp:153
msgid "&Down"
msgstr "&Aşağı"

#: ../src/richtext/richtextstyledlg.cpp:263
msgid "&Edit Style..."
msgstr "Biçemi Düz&enle..."

#: ../src/common/stockitem.cpp:155
msgid "&Execute"
msgstr "&Yürüt"

#: ../src/common/stockitem.cpp:158
msgid "&Find"
msgstr "B&ul"

#: ../src/common/stockitem.cpp:159
msgid "&First"
msgstr "İ&lk"

#: ../src/richtext/richtextsizepage.cpp:244
msgid "&Floating mode:"
msgstr "&Yüzer kip:"

#: ../src/common/stockitem.cpp:160
msgid "&Floppy"
msgstr "&Esnek"

#: ../src/common/stockitem.cpp:194
msgid "&Font"
msgstr "&Yazı türü"

#: ../src/generic/fontdlgg.cpp:371
msgid "&Font family:"
msgstr "&Yazı türü ailesi:"

#: ../src/richtext/richtextliststylepage.cpp:194
msgid "&Font for Level..."
msgstr "&Düzeyin yazı türü..."

#: ../src/richtext/richtextfontpage.cpp:147
#: ../src/richtext/richtextsymboldlg.cpp:400
msgid "&Font:"
msgstr "&Yazı türü:"

#: ../src/common/stockitem.cpp:161
msgid "&Forward"
msgstr "İ&leri"

#: ../src/richtext/richtextsymboldlg.cpp:451
msgid "&From:"
msgstr "&Kaynak:"

#: ../src/common/stockitem.cpp:162
msgid "&Harddisk"
msgstr "&Sabit disk"

#: ../src/richtext/richtextsizepage.cpp:351
#: ../src/richtext/richtextsizepage.cpp:358
msgid "&Height:"
msgstr "&Yükseklik:"

#: ../include/wx/richmsgdlg.h:30
msgid "&Hide details"
msgstr "Ayrıntıları &gizle"

#: ../src/common/stockitem.cpp:164
msgid "&Home"
msgstr "&Açılış"

#: ../src/richtext/richtextbackgroundpage.cpp:212
msgid "&Horizontal offset:"
msgstr "&Yatay öteleme:"

#: ../src/richtext/richtextindentspage.cpp:184
#: ../src/richtext/richtextliststylepage.cpp:372
msgid "&Indentation (tenths of a mm)"
msgstr "İçe&rlek (1/10mm ölçeğinde)"

#: ../src/richtext/richtextindentspage.cpp:167
#: ../src/richtext/richtextliststylepage.cpp:356
msgid "&Indeterminate"
msgstr "&Belirsiz"

#: ../src/common/stockitem.cpp:166
msgid "&Index"
msgstr "D&izin"

#: ../src/common/stockitem.cpp:167
msgid "&Info"
msgstr "&Bilgiler"

#: ../src/common/stockitem.cpp:168
msgid "&Italic"
msgstr "&Yatık"

#: ../src/common/stockitem.cpp:169
msgid "&Jump to"
msgstr "A&tla"

#: ../src/richtext/richtextindentspage.cpp:153
#: ../src/richtext/richtextliststylepage.cpp:342
msgid "&Justified"
msgstr "&Hizalanmış"

#: ../src/common/stockitem.cpp:174
msgid "&Last"
msgstr "&Son"

#: ../src/richtext/richtextindentspage.cpp:139
#: ../src/richtext/richtextliststylepage.cpp:328
msgid "&Left"
msgstr "So&l"

#: ../src/richtext/richtextindentspage.cpp:195
#: ../src/richtext/richtextborderspage.cpp:243
#: ../src/richtext/richtextborderspage.cpp:411
#: ../src/richtext/richtextliststylepage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:186
#: ../src/richtext/richtextmarginspage.cpp:300
#: ../src/richtext/richtextsizepage.cpp:532
#: ../src/richtext/richtextsizepage.cpp:539
msgid "&Left:"
msgstr "So&l:"

#: ../src/richtext/richtextliststylepage.cpp:183
msgid "&List level:"
msgstr "&Liste düzeyi:"

#: ../src/generic/logg.cpp:517
msgid "&Log"
msgstr "Gün&lük"

#: ../src/univ/themes/win32.cpp:3748
msgid "&Move"
msgstr "&Taşı"

#: ../src/richtext/richtextsizepage.cpp:672
msgid "&Move the object to:"
msgstr "&Nesneyi şuraya taşı:"

#: ../src/common/stockitem.cpp:175
msgid "&Network"
msgstr "&Ağ"

#: ../src/richtext/richtexttabspage.cpp:132 ../src/common/stockitem.cpp:176
msgid "&New"
msgstr "Ye&ni"

#: ../src/aui/tabmdi.cpp:111 ../src/generic/mdig.cpp:100 ../src/msw/mdi.cpp:180
msgid "&Next"
msgstr "So&nraki"

#: ../src/richtext/richtextsizepage.cpp:681
msgid "&Next Paragraph"
msgstr "So&nraki Paragraf"

#: ../src/generic/tipdlg.cpp:240
msgid "&Next Tip"
msgstr "So&nraki İpucu"

#: ../src/richtext/richtextstylepage.cpp:125
msgid "&Next style:"
msgstr "So&nraki biçem:"

#: ../src/common/stockitem.cpp:177 ../src/msw/msgdlg.cpp:441
msgid "&No"
msgstr "&Hayır"

#: ../src/generic/dbgrptg.cpp:356
msgid "&Notes:"
msgstr "&Notlar:"

#: ../src/richtext/richtextbulletspage.cpp:251
msgid "&Number:"
msgstr "&Sayı:"

#: ../src/generic/fontdlgg.cpp:475 ../src/generic/fontdlgg.cpp:482
#: ../src/osx/carbon/fontdlg.cpp:408 ../src/common/stockitem.cpp:178
msgid "&OK"
msgstr "&Tamam"

#: ../src/generic/dbgrptg.cpp:342 ../src/common/stockitem.cpp:179
msgid "&Open..."
msgstr "&Aç..."

#: ../src/richtext/richtextindentspage.cpp:222
msgid "&Outline level:"
msgstr "Başlık &düzeyi:"

#: ../src/richtext/richtextindentspage.cpp:293
msgid "&Page Break"
msgstr "&Sayfa Sonu"

#: ../include/wx/richtext/richtextbuffer.h:5010
msgid "&Picture"
msgstr "&Görsel"

#: ../src/generic/fontdlgg.cpp:422
msgid "&Point size:"
msgstr "Yazı &boyutu:"

#: ../src/richtext/richtexttabspage.cpp:110
msgid "&Position (tenths of a mm):"
msgstr "&Konum (1/10mm):"

#: ../src/richtext/richtextsizepage.cpp:514
msgid "&Position mode:"
msgstr "&Konum kipi:"

#: ../src/aui/tabmdi.cpp:112 ../src/generic/mdig.cpp:101 ../src/msw/mdi.cpp:181
msgid "&Previous"
msgstr "Ö&nceki"

#: ../src/richtext/richtextsizepage.cpp:675
msgid "&Previous Paragraph"
msgstr "Önceki &Paragraf"

#: ../src/common/stockitem.cpp:183
msgid "&Print..."
msgstr "&Yazdır..."

#: ../src/richtext/richtextctrl.cpp:339 ../src/richtext/richtextctrl.cpp:5514
#: ../src/common/stockitem.cpp:184
msgid "&Properties"
msgstr "Ö&zellikler"

#: ../src/common/cmdproc.cpp:289 ../src/common/cmdproc.cpp:309
msgid "&Redo "
msgstr "&Yinele "

#: ../src/richtext/richtextstyledlg.cpp:257
msgid "&Rename Style..."
msgstr "Biçemi &yeniden adlandır..."

#: ../src/generic/fdrepdlg.cpp:179
msgid "&Replace"
msgstr "&Değiştir"

#: ../src/richtext/richtextstyledlg.cpp:287
msgid "&Restart numbering"
msgstr "Numa&ralandırmayı yeniden başlat"

#: ../src/univ/themes/win32.cpp:3747
msgid "&Restore"
msgstr "Ge&ri yükle"

#: ../src/richtext/richtextindentspage.cpp:146
#: ../src/richtext/richtextliststylepage.cpp:335
msgid "&Right"
msgstr "&Sağ"

#: ../src/richtext/richtextindentspage.cpp:213
#: ../src/richtext/richtextborderspage.cpp:277
#: ../src/richtext/richtextborderspage.cpp:445
#: ../src/richtext/richtextliststylepage.cpp:399
#: ../src/richtext/richtextmarginspage.cpp:211
#: ../src/richtext/richtextmarginspage.cpp:325
#: ../src/richtext/richtextsizepage.cpp:602
#: ../src/richtext/richtextsizepage.cpp:609
msgid "&Right:"
msgstr "&Sağ:"

#: ../src/common/stockitem.cpp:190
msgid "&Save"
msgstr "Kay&det"

#: ../src/common/stockitem.cpp:191
msgid "&Save as"
msgstr "&Farklı kaydet"

#: ../include/wx/richmsgdlg.h:29
msgid "&See details"
msgstr "&Ayrıntılar"

#: ../src/generic/tipdlg.cpp:236
msgid "&Show tips at startup"
msgstr "İpuçları &açılışta görüntülensin"

#: ../src/univ/themes/win32.cpp:3750
msgid "&Size"
msgstr "&Boyut"

#: ../src/richtext/richtextfontpage.cpp:159
msgid "&Size:"
msgstr "&Boyut:"

#: ../src/generic/progdlgg.cpp:252
msgid "&Skip"
msgstr "A&tla"

#: ../src/richtext/richtextindentspage.cpp:242
#: ../src/richtext/richtextliststylepage.cpp:417
msgid "&Spacing (tenths of a mm)"
msgstr "&Boşluk (1/10mm)"

#: ../src/common/stockitem.cpp:197
msgid "&Spell Check"
msgstr "&Yazım Denetimi"

#: ../src/common/stockitem.cpp:198
msgid "&Stop"
msgstr "&Durdur"

#: ../src/richtext/richtextfontpage.cpp:275 ../src/common/stockitem.cpp:199
msgid "&Strikethrough"
msgstr "Ü&stü çizili"

#: ../src/generic/fontdlgg.cpp:382 ../src/richtext/richtextstylepage.cpp:106
msgid "&Style:"
msgstr "&Biçem:"

#: ../src/richtext/richtextstyledlg.cpp:198
msgid "&Styles:"
msgstr "&Biçemler:"

#: ../src/richtext/richtextsymboldlg.cpp:413
msgid "&Subset:"
msgstr "A&lt küme:"

#: ../src/richtext/richtextliststylepage.cpp:268
#: ../src/richtext/richtextbulletspage.cpp:209
msgid "&Symbol:"
msgstr "&Simge:"

#: ../src/richtext/richtextborderspage.cpp:381
#: ../src/richtext/richtextborderspage.cpp:549
msgid "&Synchronize values"
msgstr "&Değerleri eşleştir"

#: ../include/wx/richtext/richtextbuffer.h:6069
msgid "&Table"
msgstr "&Tablo"

#: ../src/common/stockitem.cpp:200
msgid "&Top"
msgstr "Üs&t"

#: ../src/richtext/richtextborderspage.cpp:311
#: ../src/richtext/richtextborderspage.cpp:479
#: ../src/richtext/richtextmarginspage.cpp:234
#: ../src/richtext/richtextmarginspage.cpp:348
#: ../src/richtext/richtextsizepage.cpp:567
#: ../src/richtext/richtextsizepage.cpp:574
msgid "&Top:"
msgstr "Üs&t:"

#: ../src/generic/fontdlgg.cpp:444 ../src/common/stockitem.cpp:202
msgid "&Underline"
msgstr "&Altı çizili"

#: ../src/richtext/richtextfontpage.cpp:234
msgid "&Underlining:"
msgstr "&Altını çizme:"

#: ../src/common/cmdproc.cpp:265
msgid "&Undo "
msgstr "&Geri Al "

#: ../src/common/stockitem.cpp:204
msgid "&Unindent"
msgstr "İçerleği &geri al"

#: ../src/common/stockitem.cpp:205
msgid "&Up"
msgstr "Y&ukarı"

#: ../src/richtext/richtextsizepage.cpp:278
msgid "&Vertical alignment:"
msgstr "&Dikey hizalama:"

#: ../src/richtext/richtextbackgroundpage.cpp:235
msgid "&Vertical offset:"
msgstr "&Dikey öteleme:"

#: ../src/generic/dbgrptg.cpp:340
msgid "&View..."
msgstr "&Görünüm..."

#: ../src/generic/fontdlgg.cpp:393
msgid "&Weight:"
msgstr "&Yoğunluk:"

#: ../src/richtext/richtextsizepage.cpp:317
#: ../src/richtext/richtextsizepage.cpp:324
msgid "&Width:"
msgstr "&Genişlik:"

#: ../src/common/stockitem.cpp:206 ../src/msw/msgdlg.cpp:441
msgid "&Yes"
msgstr "&Evet"

#: ../src/common/valtext.cpp:256
#, c-format
msgid "'%s' contains illegal characters"
msgstr "'%s' içinde geçersiz karakterler var"

#: ../src/common/valtext.cpp:254
#, c-format
msgid "'%s' doesn't consist only of valid characters"
msgstr "'%s' yalnız geçerli karakterleri içermiyor"

#: ../src/common/config.cpp:519 ../src/msw/regconf.cpp:258
#, c-format
msgid "'%s' has extra '..', ignored."
msgstr "'%s' içindeki fazladan '..' yoksayıldı."

#: ../src/common/cmdline.cpp:1113 ../src/common/cmdline.cpp:1131
#, c-format
msgid "'%s' is not a correct numeric value for option '%s'."
msgstr "'%s' '%s' seçeneği için doğru bir sayısal değer değil."

#: ../src/common/translation.cpp:1100
#, c-format
msgid "'%s' is not a valid message catalog."
msgstr "'%s' geçerli bir ileti kataloğu değil."

#: ../src/common/valtext.cpp:165
#, c-format
msgid "'%s' is not one of the valid strings"
msgstr "'%s' geçerli dizgelerden biri değil"

#: ../src/common/valtext.cpp:167
#, c-format
msgid "'%s' is one of the invalid strings"
msgstr "'%s' geçersiz dizgelerden biri"

#: ../src/common/textbuf.cpp:237
#, c-format
msgid "'%s' is probably a binary buffer."
msgstr "'%s' muhtemelen ikili ara bellek."

#: ../src/common/valtext.cpp:252
#, c-format
msgid "'%s' should be numeric."
msgstr "'%s' sayısal olmalı."

#: ../src/common/valtext.cpp:244
#, c-format
msgid "'%s' should only contain ASCII characters."
msgstr "'%s' yalnız ASCII karakterler içermeli."

#: ../src/common/valtext.cpp:246
#, c-format
msgid "'%s' should only contain alphabetic characters."
msgstr "'%s' yalnız alfabetik karakterler içermeli."

#: ../src/common/valtext.cpp:248
#, c-format
msgid "'%s' should only contain alphabetic or numeric characters."
msgstr "'%s' yalnız alfabetik ya da sayısal karakterler içermeli."

#: ../src/common/valtext.cpp:250
#, c-format
msgid "'%s' should only contain digits."
msgstr "'%s' yalnız rakamlar içermeli."

#: ../src/richtext/richtextliststylepage.cpp:229
#: ../src/richtext/richtextbulletspage.cpp:166
msgid "(*)"
msgstr "(*)"

#: ../src/html/helpwnd.cpp:963
msgid "(Help)"
msgstr "(Yardım)"

#: ../src/richtext/richtextliststylepage.cpp:481
#: ../src/richtext/richtextbulletspage.cpp:273
msgid "(None)"
msgstr "(Hiçbiri)"

#: ../src/richtext/richtextsymboldlg.cpp:504
msgid "(Normal text)"
msgstr "(Normal metin)"

#: ../src/html/helpwnd.cpp:419 ../src/html/helpwnd.cpp:1106
#: ../src/html/helpwnd.cpp:1742
msgid "(bookmarks)"
msgstr "(yer imleri)"

#: ../src/richtext/richtextindentspage.cpp:274
#: ../src/richtext/richtextindentspage.cpp:286
#: ../src/richtext/richtextindentspage.cpp:287
#: ../src/richtext/richtextindentspage.cpp:311
#: ../src/richtext/richtextindentspage.cpp:326
#: ../src/richtext/richtextformatdlg.cpp:884
#: ../src/richtext/richtextfontpage.cpp:349
#: ../src/richtext/richtextfontpage.cpp:353
#: ../src/richtext/richtextfontpage.cpp:357
#: ../src/richtext/richtextliststylepage.cpp:448
#: ../src/richtext/richtextliststylepage.cpp:460
#: ../src/richtext/richtextliststylepage.cpp:461
msgid "(none)"
msgstr "(hiçbiri)"

#: ../src/richtext/richtextliststylepage.cpp:492
#: ../src/richtext/richtextbulletspage.cpp:284
msgid "*"
msgstr "*"

#: ../src/richtext/richtextliststylepage.cpp:236
#: ../src/richtext/richtextbulletspage.cpp:173
msgid "*)"
msgstr "*)"

#: ../src/richtext/richtextliststylepage.cpp:495
#: ../src/richtext/richtextbulletspage.cpp:287
msgid "+"
msgstr "+"

#: ../src/msw/utils.cpp:1152
msgid ", 64-bit edition"
msgstr ", 64-bit sürümü"

#: ../src/richtext/richtextliststylepage.cpp:493
#: ../src/richtext/richtextbulletspage.cpp:285
msgid "-"
msgstr "-"

#: ../src/generic/filepickerg.cpp:66
msgid "..."
msgstr "..."

#: ../src/richtext/richtextindentspage.cpp:276
#: ../src/richtext/richtextliststylepage.cpp:450
msgid "1.1"
msgstr "1.1"

#: ../src/richtext/richtextindentspage.cpp:277
#: ../src/richtext/richtextliststylepage.cpp:451
msgid "1.2"
msgstr "1.2"

#: ../src/richtext/richtextindentspage.cpp:278
#: ../src/richtext/richtextliststylepage.cpp:452
msgid "1.3"
msgstr "1.3"

#: ../src/richtext/richtextindentspage.cpp:279
#: ../src/richtext/richtextliststylepage.cpp:453
msgid "1.4"
msgstr "1.4"

#: ../src/richtext/richtextindentspage.cpp:280
#: ../src/richtext/richtextliststylepage.cpp:454
msgid "1.5"
msgstr "1.5"

#: ../src/richtext/richtextindentspage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:455
msgid "1.6"
msgstr "1.6"

#: ../src/richtext/richtextindentspage.cpp:282
#: ../src/richtext/richtextliststylepage.cpp:456
msgid "1.7"
msgstr "1.7"

#: ../src/richtext/richtextindentspage.cpp:283
#: ../src/richtext/richtextliststylepage.cpp:457
msgid "1.8"
msgstr "1.8"

#: ../src/richtext/richtextindentspage.cpp:284
#: ../src/richtext/richtextliststylepage.cpp:458
msgid "1.9"
msgstr "1.9"

#: ../src/common/paper.cpp:140
msgid "10 x 11 in"
msgstr "10 x 11 inç"

#: ../src/common/paper.cpp:113
msgid "10 x 14 in"
msgstr "10 x 14 inç"

#: ../src/common/paper.cpp:114
msgid "11 x 17 in"
msgstr "11 x 17 inç"

#: ../src/common/paper.cpp:184
msgid "12 x 11 in"
msgstr "12 x 11 inç"

#: ../src/common/paper.cpp:141
msgid "15 x 11 in"
msgstr "15 x 11 inç"

#: ../src/richtext/richtextindentspage.cpp:285
#: ../src/richtext/richtextliststylepage.cpp:459
msgid "2"
msgstr "2"

#: ../src/common/paper.cpp:132
msgid "6 3/4 Envelope, 3 5/8 x 6 1/2 in"
msgstr "6 3/4 Zarf, 3 5/8 x 6 1/2 inç"

#: ../src/common/paper.cpp:139
msgid "9 x 11 in"
msgstr "9 x 11 inç"

#: ../src/html/htmprint.cpp:431
msgid ": file does not exist!"
msgstr ": dosya bulunamadı!"

#: ../src/common/fontmap.cpp:199
msgid ": unknown charset"
msgstr ": karakter kümesi bilinmiyor"

#: ../src/common/fontmap.cpp:413
msgid ": unknown encoding"
msgstr ": kodlama bilinmiyor"

#: ../src/osx/carbon/fontdlg.cpp:422 ../src/osx/carbon/fontdlg.cpp:628
#: ../src/osx/carbon/fontdlg.cpp:648
msgid "<Any Decorative>"
msgstr "<Süslü>"

#: ../src/osx/carbon/fontdlg.cpp:423 ../src/osx/carbon/fontdlg.cpp:630
#: ../src/osx/carbon/fontdlg.cpp:650
msgid "<Any Modern>"
msgstr "<Modern>"

#: ../src/osx/carbon/fontdlg.cpp:421 ../src/osx/carbon/fontdlg.cpp:626
#: ../src/osx/carbon/fontdlg.cpp:646
msgid "<Any Roman>"
msgstr "<Roman>"

#: ../src/osx/carbon/fontdlg.cpp:424 ../src/osx/carbon/fontdlg.cpp:632
#: ../src/osx/carbon/fontdlg.cpp:652
msgid "<Any Script>"
msgstr "<Betik>"

#: ../src/osx/carbon/fontdlg.cpp:425 ../src/osx/carbon/fontdlg.cpp:637
#: ../src/osx/carbon/fontdlg.cpp:656
msgid "<Any Swiss>"
msgstr "<İsveç>"

#: ../src/osx/carbon/fontdlg.cpp:426 ../src/osx/carbon/fontdlg.cpp:634
#: ../src/osx/carbon/fontdlg.cpp:654
msgid "<Any Teletype>"
msgstr "<Teletype>"

#: ../src/osx/carbon/fontdlg.cpp:420
msgid "<Any>"
msgstr "<Herhangi>"

#: ../src/generic/filectrlg.cpp:250 ../src/generic/filectrlg.cpp:273
msgid "<DIR>"
msgstr "<DIR>"

#: ../src/generic/filectrlg.cpp:254 ../src/generic/filectrlg.cpp:277
msgid "<DRIVE>"
msgstr "<DRIVE>"

#: ../src/generic/filectrlg.cpp:252 ../src/generic/filectrlg.cpp:275
msgid "<LINK>"
msgstr "<LINK>"

#: ../src/html/helpwnd.cpp:1266
msgid "<b><i>Bold italic face.</i></b><br>"
msgstr "<b><i>Koyu yatık şekil.</i></b><br>"

#: ../src/html/helpwnd.cpp:1270
msgid "<b><i>bold italic <u>underlined</u></i></b><br>"
msgstr "<b><i>koyu yatık <u>altı çizili</u></i></b><br>"

#: ../src/html/helpwnd.cpp:1265
msgid "<b>Bold face.</b> "
msgstr "<b>Koyu şekil.</b> "

#: ../src/html/helpwnd.cpp:1264
msgid "<i>Italic face.</i> "
msgstr "<i>Yatık şekil.</i> "

#: ../src/richtext/richtextliststylepage.cpp:494
#: ../src/richtext/richtextbulletspage.cpp:286
msgid ">"
msgstr ">"

#: ../src/generic/dbgrptg.cpp:318
msgid "A debug report has been generated in the directory\n"
msgstr "Klasörde bir hata ayıklama raporu oluşturuldu\n"

#: ../src/common/debugrpt.cpp:573
msgid "A debug report has been generated. It can be found in"
msgstr "Hata ayıklama raporu oluşturuldu. Şurada bulabilirsiniz"

#: ../src/common/xtixml.cpp:418
msgid "A non empty collection must consist of 'element' nodes"
msgstr "Boş olmayan bir yığın 'element' düğümlerinden oluşmalıdır"

#: ../src/richtext/richtextliststylepage.cpp:304
#: ../src/richtext/richtextliststylepage.cpp:306
#: ../src/richtext/richtextbulletspage.cpp:244
#: ../src/richtext/richtextbulletspage.cpp:246
msgid "A standard bullet name."
msgstr "Standart bir madde imi adı."

#: ../src/common/paper.cpp:217
msgid "A0 sheet, 841 x 1189 mm"
msgstr "A0 sayfa, 841 x 1189 mm"

#: ../src/common/paper.cpp:218
msgid "A1 sheet, 594 x 841 mm"
msgstr "A1 sayfa, 594 x 841 mm"

#: ../src/common/paper.cpp:159
msgid "A2 420 x 594 mm"
msgstr "A2 420 x 594 mm"

#: ../src/common/paper.cpp:156
msgid "A3 Extra 322 x 445 mm"
msgstr "A3 Ekstra 322 x 445 mm"

#: ../src/common/paper.cpp:161
msgid "A3 Extra Transverse 322 x 445 mm"
msgstr "A3 Ekstra Enine 322 x 445 mm"

#: ../src/common/paper.cpp:170
msgid "A3 Rotated 420 x 297 mm"
msgstr "A3 Çevrilmiş 420 x 297 mm"

#: ../src/common/paper.cpp:160
msgid "A3 Transverse 297 x 420 mm"
msgstr "A3 Enine 297 x 420 mm"

#: ../src/common/paper.cpp:106
msgid "A3 sheet, 297 x 420 mm"
msgstr "A3 sayfa, 297 x 420 mm"

#: ../src/common/paper.cpp:146
msgid "A4 Extra 9.27 x 12.69 in"
msgstr "A4 Ekstra 9.27 x 12.69 inç"

#: ../src/common/paper.cpp:153
msgid "A4 Plus 210 x 330 mm"
msgstr "A4 Artı 210 x 330 mm"

#: ../src/common/paper.cpp:171
msgid "A4 Rotated 297 x 210 mm"
msgstr "A4 Çevrilmiş 297 x 210 mm"

#: ../src/common/paper.cpp:148
msgid "A4 Transverse 210 x 297 mm"
msgstr "A4 Enine 210 x 297 mm"

#: ../src/common/paper.cpp:97
msgid "A4 sheet, 210 x 297 mm"
msgstr "A4 sayfa, 210 x 297 mm"

#: ../src/common/paper.cpp:107
msgid "A4 small sheet, 210 x 297 mm"
msgstr "A4 küçük sayfa, 210 x 297 mm"

#: ../src/common/paper.cpp:157
msgid "A5 Extra 174 x 235 mm"
msgstr "A5 Ekstra 174 x 235 mm"

#: ../src/common/paper.cpp:172
msgid "A5 Rotated 210 x 148 mm"
msgstr "A5 Çevrilmiş 210 x 148 mm"

#: ../src/common/paper.cpp:154
msgid "A5 Transverse 148 x 210 mm"
msgstr "A5 Enine 148 x 210 mm"

#: ../src/common/paper.cpp:108
msgid "A5 sheet, 148 x 210 mm"
msgstr "A5 sayfa, 148 x 210 mm"

#: ../src/common/paper.cpp:164
msgid "A6 105 x 148 mm"
msgstr "A6 105 x 148 mm"

#: ../src/common/paper.cpp:177
msgid "A6 Rotated 148 x 105 mm"
msgstr "A6 Çevrilmiş 148 x 105 mm"

#: ../src/generic/fontdlgg.cpp:83 ../src/richtext/richtextformatdlg.cpp:529
#: ../src/osx/carbon/fontdlg.cpp:153
msgid "ABCDEFGabcdefg12345"
msgstr "ABCDEFGabcdefg12345"

#: ../src/richtext/richtextsymboldlg.cpp:458 ../src/common/ftp.cpp:403
msgid "ASCII"
msgstr "ASCII"

#: ../src/common/stockitem.cpp:139
msgid "About"
msgstr "Hakkında"

#: ../src/osx/menu_osx.cpp:560
msgid "About..."
msgstr "Hakkında..."

#: ../src/richtext/richtextsizepage.cpp:520
msgid "Absolute"
msgstr "Mutlak"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:873
msgid "ActiveBorder"
msgstr "EtkinKenarlık"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:874
msgid "ActiveCaption"
msgstr "EtkinBaşlık"

#: ../src/common/stockitem.cpp:207
msgid "Actual Size"
msgstr "Geçerli Boyut"

#: ../src/richtext/richtextbuffer.cpp:11455
msgid "Add Column"
msgstr "Sütun Ekle"

#: ../src/richtext/richtextbuffer.cpp:11392
msgid "Add Row"
msgstr "Satır Ekle"

#: ../src/html/helpwnd.cpp:432
msgid "Add current page to bookmarks"
msgstr "Geçerli sayfayı yer imlerine ekle"

#: ../src/generic/colrdlgg.cpp:366
msgid "Add to custom colours"
msgstr "Özel renklere ekle"

#: ../include/wx/xtiprop.h:255
msgid "AddToPropertyCollection called on a generic accessor"
msgstr "AddToPropertyCollection işlevi, genel bir erişici üzerinden çağrıldı"

#: ../include/wx/xtiprop.h:193
msgid "AddToPropertyCollection called w/o valid adder"
msgstr "AddToPropertyCollection işlevi, geçerli bir ekleyici olmadançağrıldı"

#: ../src/html/helpctrl.cpp:159
#, c-format
msgid "Adding book %s"
msgstr "%s kitabı ekleniyor"

#: ../src/richtext/richtextliststylepage.cpp:435
msgid "After a paragraph:"
msgstr "Paragraftan sonra:"

#: ../src/common/stockitem.cpp:172
msgid "Align Left"
msgstr "Sola Hizala"

#: ../src/common/stockitem.cpp:173
msgid "Align Right"
msgstr "Sağa Hizala"

#: ../src/richtext/richtextsizepage.cpp:266
msgid "Alignment"
msgstr "Hizalama"

#: ../src/generic/filectrlg.cpp:1197 ../src/common/fldlgcmn.cpp:107
#, c-format
msgid "All files (%s)|%s"
msgstr "Tüm dosyalar (%s)|%s"

#: ../include/wx/defs.h:2886
msgid "All files (*)|*"
msgstr "Tüm dosyalar (*)|*"

#: ../include/wx/defs.h:2883
msgid "All files (*.*)|*.*"
msgstr "Tüm dosyalar (*.*)|*.*"

#: ../src/richtext/richtextstyles.cpp:1061
msgid "All styles"
msgstr "Tüm biçemler"

#: ../src/propgrid/manager.cpp:1528
msgid "Alphabetic Mode"
msgstr "Alfabetik Kip"

#: ../src/common/xtistrm.cpp:425
msgid "Already Registered Object passed to SetObjectClassInfo"
msgstr "SetObjectClassInfo işlevi zaten kaydedilmiş bir nesne ile çağrıldı"

#: ../src/unix/dialup.cpp:353
msgid "Already dialling ISP."
msgstr "ISP zaten aranıyor."

#: ../src/common/accelcmn.cpp:331 ../src/univ/themes/win32.cpp:3756
msgid "Alt+"
msgstr "Alt+"

#: ../src/richtext/richtextborderspage.cpp:577
#: ../src/richtext/richtextborderspage.cpp:579
msgid "An optional corner radius for adding rounded corners."
msgstr "Yuvarlak köşeler eklemek için isteğe bağlı köşe yarıçapı."

#: ../src/common/debugrpt.cpp:576
msgid "And includes the following files:\n"
msgstr "Ve aşağıdaki dosyaları içeriyor:\n"

#: ../src/generic/animateg.cpp:162
#, c-format
msgid "Animation file is not of type %ld."
msgstr "Canlandırma dosyası %ld türünde değil."

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:872
msgid "AppWorkspace"
msgstr "UygulamaAlanı"

#: ../src/generic/logg.cpp:1014
#, c-format
msgid "Append log to file '%s' (choosing [No] will overwrite it)?"
msgstr "'%s' günlük dosyasına eklensin ([Hayır] seçilirse üzerine yazılacak)."

#: ../src/osx/menu_osx.cpp:577 ../src/osx/menu_osx.cpp:585
msgid "Application"
msgstr "Uygulama"

#: ../src/propgrid/advprops.cpp:1609
msgid "Aqua"
msgstr "Deniz Mavisi"

#: ../src/richtext/richtextliststylepage.cpp:482
#: ../src/richtext/richtextbulletspage.cpp:274
msgid "Arabic"
msgstr "Arapça"

#: ../src/common/fmapbase.cpp:153
msgid "Arabic (ISO-8859-6)"
msgstr "Arapça (ISO-8859-6)"

#: ../src/msw/ole/automtn.cpp:672
#, c-format
msgid "Argument %u not found."
msgstr "%u argümanı bulunamadı."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1753
msgid "Arrow"
msgstr "Ok"

#: ../src/generic/aboutdlgg.cpp:184
msgid "Artists"
msgstr "Sanatçılar"

#: ../src/common/stockitem.cpp:195
msgid "Ascending"
msgstr "Artan"

#: ../src/generic/filectrlg.cpp:433
msgid "Attributes"
msgstr "Öznitelikler"

#: ../src/richtext/richtextliststylepage.cpp:294
#: ../src/richtext/richtextbulletspage.cpp:232
#: ../src/richtext/richtextbulletspage.cpp:234
msgid "Available fonts."
msgstr "Kullanılabilecek yazı türleri."

#: ../src/common/paper.cpp:137
msgid "B4 (ISO) 250 x 353 mm"
msgstr "B4 (ISO) 250 x 353 mm"

#: ../src/common/paper.cpp:173
msgid "B4 (JIS) Rotated 364 x 257 mm"
msgstr "B4 (JIS) Çevrilmiş 364 x 257 mm"

#: ../src/common/paper.cpp:127
msgid "B4 Envelope, 250 x 353 mm"
msgstr "B4 Zarf, 250 x 353 mm"

#: ../src/common/paper.cpp:109
msgid "B4 sheet, 250 x 354 mm"
msgstr "B4 sayfa, 250 x 354 mm"

#: ../src/common/paper.cpp:158
msgid "B5 (ISO) Extra 201 x 276 mm"
msgstr "B5 (ISO) Ekstra 201 x 276 mm"

#: ../src/common/paper.cpp:174
msgid "B5 (JIS) Rotated 257 x 182 mm"
msgstr "B5 (JIS) Çevrilmiş 257 x 182 mm"

#: ../src/common/paper.cpp:155
msgid "B5 (JIS) Transverse 182 x 257 mm"
msgstr "B5 (JIS) Enine 182 x 257 mm"

#: ../src/common/paper.cpp:128
msgid "B5 Envelope, 176 x 250 mm"
msgstr "B5 Zarf, 176 x 250 mm"

#: ../src/common/paper.cpp:110
msgid "B5 sheet, 182 x 257 millimeter"
msgstr "B5 sayfa, 182 x 257 mm"

#: ../src/common/paper.cpp:182
msgid "B6 (JIS) 128 x 182 mm"
msgstr "B6 (JIS) 128 x 182 mm"

#: ../src/common/paper.cpp:183
msgid "B6 (JIS) Rotated 182 x 128 mm"
msgstr "B6 (JIS) Çevrilmiş 182 x 128 mm"

#: ../src/common/paper.cpp:129
msgid "B6 Envelope, 176 x 125 mm"
msgstr "B6 Zarf, 176 x 125 mm"

#: ../src/common/imagbmp.cpp:531 ../src/common/imagbmp.cpp:561
#: ../src/common/imagbmp.cpp:576
msgid "BMP: Couldn't allocate memory."
msgstr "BMP: bellek ayrılamadı."

#: ../src/common/imagbmp.cpp:100
msgid "BMP: Couldn't save invalid image."
msgstr "BMP: Geçersiz görüntü kaydedilemedi."

#: ../src/common/imagbmp.cpp:356
msgid "BMP: Couldn't write RGB color map."
msgstr "BMP: RGB renk haritası yazılamadı."

#: ../src/common/imagbmp.cpp:490
msgid "BMP: Couldn't write data."
msgstr "BMP: Veri yazılamadı."

#: ../src/common/imagbmp.cpp:246
msgid "BMP: Couldn't write the file (Bitmap) header."
msgstr "BMP: Dosya (Bitmap) başlık bilgisi yazılamadı."

#: ../src/common/imagbmp.cpp:269
msgid "BMP: Couldn't write the file (BitmapInfo) header."
msgstr "BMP: Dosya (BitmapInfo) başlık bilgisi yazılamadı."

#: ../src/common/imagbmp.cpp:140
msgid "BMP: wxImage doesn't have own wxPalette."
msgstr "BMP: wxImage için wxPalette yok."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:142 ../src/common/accelcmn.cpp:52
msgid "Back"
msgstr "Geri"

#: ../src/richtext/richtextbackgroundpage.cpp:148
#: ../src/richtext/richtextformatdlg.cpp:384
msgid "Background"
msgstr "Art alan"

#: ../src/richtext/richtextbackgroundpage.cpp:160
msgid "Background &colour:"
msgstr "Art alan &rengi:"

#: ../src/osx/carbon/fontdlg.cpp:220
msgid "Background colour"
msgstr "Art alan rengi"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:52
msgid "Backspace"
msgstr "Geri silme"

#: ../src/common/fmapbase.cpp:160
msgid "Baltic (ISO-8859-13)"
msgstr "Baltık (ISO-8859-13)"

#: ../src/common/fmapbase.cpp:151
msgid "Baltic (old) (ISO-8859-4)"
msgstr "Baltık (eski) (ISO-8859-4)"

#: ../src/richtext/richtextliststylepage.cpp:426
msgid "Before a paragraph:"
msgstr "Paragraftan önce:"

#: ../src/richtext/richtextliststylepage.cpp:489
#: ../src/richtext/richtextbulletspage.cpp:281
msgid "Bitmap"
msgstr "Bitmap"

#: ../src/propgrid/advprops.cpp:1594
msgid "Black"
msgstr "Siyah"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1755
msgid "Blank"
msgstr "Boş"

#: ../src/propgrid/advprops.cpp:1603
msgid "Blue"
msgstr "Mavi"

#: ../src/generic/colrdlgg.cpp:345
msgid "Blue:"
msgstr "Mavi:"

#: ../src/generic/fontdlgg.cpp:333 ../src/richtext/richtextfontpage.cpp:355
#: ../src/osx/carbon/fontdlg.cpp:354 ../src/common/stockitem.cpp:143
msgid "Bold"
msgstr "Kalın"

#: ../src/richtext/richtextborderspage.cpp:230
#: ../src/richtext/richtextborderspage.cpp:388
msgid "Border"
msgstr "Kenarlık"

#: ../src/richtext/richtextformatdlg.cpp:379
msgid "Borders"
msgstr "Kenarlıklar"

#: ../src/generic/prntdlgg.cpp:893
msgid "Bottom margin (mm):"
msgstr "Alt kenar boşluğu (mm):"

#: ../src/richtext/richtextbuffer.cpp:9383
msgid "Box Properties"
msgstr "Kutu Özellikleri"

#: ../src/richtext/richtextstyles.cpp:1065
msgid "Box styles"
msgstr "Kutu biçemleri"

#: ../src/propgrid/advprops.cpp:1602
msgid "Brown"
msgstr "Kahverengi"

#: ../src/richtext/richtextliststylepage.cpp:245
#: ../src/richtext/richtextbulletspage.cpp:182
msgid "Bullet &Alignment:"
msgstr "Madde İmi &Hizalaması:"

#: ../src/richtext/richtextliststylepage.cpp:309
msgid "Bullet style"
msgstr "Madde imi biçemi"

#: ../src/richtext/richtextformatdlg.cpp:359
msgid "Bullets"
msgstr "Madde imleri"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1756
msgid "Bullseye"
msgstr "Öküz gözü"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:875
msgid "ButtonFace"
msgstr "DüğmeÖnyüzü"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:876
msgid "ButtonHighlight"
msgstr "DüğmeVurgusu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:877
msgid "ButtonShadow"
msgstr "DüğmeGölgesi"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:878
msgid "ButtonText"
msgstr "DüğmeMetni"

#: ../src/common/paper.cpp:98
msgid "C sheet, 17 x 22 in"
msgstr "C sayfa, 17 x 22 inç"

#: ../src/generic/logg.cpp:514
msgid "C&lear"
msgstr "T&emizle"

#: ../src/generic/fontdlgg.cpp:406
msgid "C&olour:"
msgstr "&Renk:"

#: ../src/common/paper.cpp:123
msgid "C3 Envelope, 324 x 458 mm"
msgstr "C3 Zarf, 324 x 458 mm"

#: ../src/common/paper.cpp:124
msgid "C4 Envelope, 229 x 324 mm"
msgstr "C4 Zarf, 229 x 324 mm"

#: ../src/common/paper.cpp:122
msgid "C5 Envelope, 162 x 229 mm"
msgstr "C5 Zarf, 162 x 229 mm"

#: ../src/common/paper.cpp:125
msgid "C6 Envelope, 114 x 162 mm"
msgstr "C6 Zarf, 114 x 162 mm"

#: ../src/common/paper.cpp:126
msgid "C65 Envelope, 114 x 229 mm"
msgstr "C65 Zarf, 114 x 229 mm"

#: ../src/common/stockitem.cpp:146
msgid "CD-Rom"
msgstr "CD-Rom"

#: ../src/html/chm.cpp:815 ../src/html/chm.cpp:874
msgid "CHM handler currently supports only local files!"
msgstr "CHM işleyici şimdilik yalnız yerel dosyaları destekliyor!"

#: ../src/richtext/richtextfontpage.cpp:282
msgid "Ca&pitals"
msgstr "&Büyük harfler"

#: ../src/common/cmdproc.cpp:267
msgid "Can't &Undo "
msgstr "&Geri Alınamıyor "

#: ../src/common/image.cpp:2824
msgid "Can't automatically determine the image format for non-seekable input."
msgstr "Aranamayan giriş için görsel biçimi kendiliğinden belirlenemiyor."

#: ../src/msw/registry.cpp:506
#, c-format
msgid "Can't close registry key '%s'"
msgstr "'%s' kayıt anahtarı kapatılamadı"

#: ../src/msw/registry.cpp:584
#, c-format
msgid "Can't copy values of unsupported type %d."
msgstr "Desteklenmeyen %d türünün değerleri kopyalanamadı."

#: ../src/msw/registry.cpp:487
#, c-format
msgid "Can't create registry key '%s'"
msgstr "'%s' kayıt anahtarı oluşturulamadı"

#: ../src/msw/thread.cpp:665
msgid "Can't create thread"
msgstr "İş parçacığı oluşturulamadı"

#: ../src/msw/window.cpp:3691
#, c-format
msgid "Can't create window of class %s"
msgstr "%s sınıfının penceresi oluşturulamadı"

#: ../src/msw/registry.cpp:777
#, c-format
msgid "Can't delete key '%s'"
msgstr "'%s' anahtarı silinemedi"

#: ../src/msw/iniconf.cpp:458
#, c-format
msgid "Can't delete the INI file '%s'"
msgstr "'%s' INI dosyası silinemedi"

#: ../src/msw/registry.cpp:805
#, c-format
msgid "Can't delete value '%s' from key '%s'"
msgstr "'%s' değeri '%s' anahtarından silinemiyor"

#: ../src/msw/registry.cpp:1171
#, c-format
msgid "Can't enumerate subkeys of key '%s'"
msgstr "'%s' anahtarının alt anahtarları sayılamadı"

#: ../src/msw/registry.cpp:1132
#, c-format
msgid "Can't enumerate values of key '%s'"
msgstr "'%s' anahtarının değerleri sayılamadı"

#: ../src/msw/registry.cpp:1389
#, c-format
msgid "Can't export value of unsupported type %d."
msgstr "Desteklenmeyen %d türünün değeri verilemedi."

#: ../src/common/ffile.cpp:254
#, c-format
msgid "Can't find current position in file '%s'"
msgstr "'%s' dosyasındaki geçerli konum bulunamadı"

#: ../src/msw/registry.cpp:418
#, c-format
msgid "Can't get info about registry key '%s'"
msgstr "'%s' kayıt anahtarı hakkında bilgi alınamadı"

#: ../src/common/zstream.cpp:346
msgid "Can't initialize zlib deflate stream."
msgstr "Zlib sıkıştırma akışı başlatılamadı."

#: ../src/common/zstream.cpp:185
msgid "Can't initialize zlib inflate stream."
msgstr "Zlib ayıklama akışı başlatılamadı."

#: ../src/msw/fswatcher.cpp:476
#, c-format
msgid "Can't monitor non-existent directory \"%s\" for changes."
msgstr "\"%s\" klasörü bulunamadığından değişiklikleri izlenemiyor."

#: ../src/msw/registry.cpp:454
#, c-format
msgid "Can't open registry key '%s'"
msgstr "'%s' kayıt anahtarı açılamadı"

#: ../src/common/zstream.cpp:252
#, c-format
msgid "Can't read from inflate stream: %s"
msgstr "Ayıklama akışı okunamadı: %s"

#: ../src/common/zstream.cpp:244
msgid "Can't read inflate stream: unexpected EOF in underlying stream."
msgstr "Ayıklama akışı okunamadı: alt akışıta beklenmeyen dosya sonu."

#: ../src/msw/registry.cpp:1064
#, c-format
msgid "Can't read value of '%s'"
msgstr "'%s' değeri okunamadı"

#: ../src/msw/registry.cpp:878 ../src/msw/registry.cpp:910
#: ../src/msw/registry.cpp:975
#, c-format
msgid "Can't read value of key '%s'"
msgstr "'%s' anahtarının değeri okunamadı"

#: ../src/common/image.cpp:2620
#, c-format
msgid "Can't save image to file '%s': unknown extension."
msgstr "Görüntü '%s' dosyasına kaydedilemedi: bilinmeyen uzantı."

#: ../src/generic/logg.cpp:573 ../src/generic/logg.cpp:976
msgid "Can't save log contents to file."
msgstr "Günlük içeriği dosyaya kaydedilemedi."

#: ../src/msw/thread.cpp:629
msgid "Can't set thread priority"
msgstr "İş parçacığının önceliği ayarlanamadı"

#: ../src/msw/registry.cpp:896 ../src/msw/registry.cpp:938
#: ../src/msw/registry.cpp:1081
#, c-format
msgid "Can't set value of '%s'"
msgstr "'%s' değeri değiştirilemedi"

#: ../src/unix/utilsunx.cpp:351
msgid "Can't write to child process's stdin"
msgstr "Alt işlem stdin yazılamadı"

#: ../src/common/zstream.cpp:427
#, c-format
msgid "Can't write to deflate stream: %s"
msgstr "Sıkıştırma akışına yazılamadı: %s"

#: ../src/common/filefn.cpp:1261
#, c-format
msgid "Cannot enumerate files '%s'"
msgstr "'%s' dosyaları sayılamadı"

#: ../src/msw/dir.cpp:263
#, c-format
msgid "Cannot enumerate files in directory '%s'"
msgstr "'%s' klasöründeki dosyalar sayılamadı"

#: ../src/msw/dialup.cpp:523
#, c-format
msgid "Cannot find active dialup connection: %s"
msgstr "Etkin çevirmeli bağlantı bulunamadı: %s"

#: ../src/msw/dialup.cpp:827
msgid "Cannot find the location of address book file"
msgstr "Adres defteri dosyasının yeri bulunamadı"

#: ../src/msw/ole/automtn.cpp:562
#, c-format
msgid "Cannot get an active instance of \"%s\""
msgstr "Çalışan bir \"%s\" kopyası bulunamadı"

#: ../src/unix/threadpsx.cpp:1035
#, c-format
msgid "Cannot get priority range for scheduling policy %d."
msgstr "Zamanlama ilkesi %d için öncelik aralığı alınamadı."

#: ../src/unix/utilsunx.cpp:987
msgid "Cannot get the hostname"
msgstr "Sunucu adı alınamadı"

#: ../src/unix/utilsunx.cpp:1023
msgid "Cannot get the official hostname"
msgstr "Resmi sunucu adı alınamadı"

#: ../src/msw/dialup.cpp:928
msgid "Cannot hang up - no active dialup connection."
msgstr "Kapatılamadı - etkin çevirmeli bağlantı yok."

#: ../include/wx/msw/ole/oleutils.h:51
msgid "Cannot initialize OLE"
msgstr "OLE başlatılamadı"

#: ../src/common/socket.cpp:853
msgid "Cannot initialize sockets"
msgstr "Soketler başlatılamadı"

#: ../src/msw/volume.cpp:619
#, c-format
msgid "Cannot load icon from '%s'."
msgstr "'%s' içinden simge yüklenemedi."

#: ../src/xrc/xmlres.cpp:360
#, c-format
msgid "Cannot load resources from '%s'."
msgstr "Kaynaklar '%s' dosyasından yüklenemedi."

#: ../src/xrc/xmlres.cpp:742
#, c-format
msgid "Cannot load resources from file '%s'."
msgstr "Kaynaklar '%s' dosyasından yüklenemedi."

#: ../src/html/htmlfilt.cpp:137
#, c-format
msgid "Cannot open HTML document: %s"
msgstr "%s HTML belgesi açılamadı"

#: ../src/html/helpdata.cpp:667
#, c-format
msgid "Cannot open HTML help book: %s"
msgstr "%s HTML yardım kitabı açılamadı"

#: ../src/html/helpdata.cpp:299
#, c-format
msgid "Cannot open contents file: %s"
msgstr "%s içerik dosyası açılamadı"

#: ../src/generic/dcpsg.cpp:1667
msgid "Cannot open file for PostScript printing!"
msgstr "Dosya PostScript yazdırma için açılamadı!"

#: ../src/html/helpdata.cpp:313
#, c-format
msgid "Cannot open index file: %s"
msgstr "%s dizin dosyası açılamadı"

#: ../src/xrc/xmlres.cpp:724
#, c-format
msgid "Cannot open resources file '%s'."
msgstr "'%s' kaynak dosyası açılamadı."

#: ../src/html/helpwnd.cpp:1534
msgid "Cannot print empty page."
msgstr "Boş sayfa basılamaz."

#: ../src/msw/volume.cpp:507
#, c-format
msgid "Cannot read typename from '%s'!"
msgstr "'%s' içinden tür adı okunamadı!"

#: ../src/msw/thread.cpp:888
#, c-format
msgid "Cannot resume thread %lx"
msgstr "%lx iş parçacığı sürdürülemiyor"

#: ../src/unix/threadpsx.cpp:1016
msgid "Cannot retrieve thread scheduling policy."
msgstr "İş parçacığı zamanlama ilkesi alınamadı."

#: ../src/common/intl.cpp:558
#, c-format
msgid "Cannot set locale to language \"%s\"."
msgstr "Yerel ayarlar \"%s\" diline çevrilemedi."

#: ../src/unix/threadpsx.cpp:831 ../src/msw/thread.cpp:546
msgid "Cannot start thread: error writing TLS."
msgstr "İş parçacığı başlatılamadı: TLS yazma hatası."

#: ../src/msw/thread.cpp:872
#, c-format
msgid "Cannot suspend thread %lx"
msgstr "%lx iş parçacığı beklemeye alınamadı"

#: ../src/msw/thread.cpp:794
msgid "Cannot wait for thread termination"
msgstr "İş parçacığının sonlanması beklenemiyor"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:75
msgid "Capital"
msgstr "Büyük"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:879
msgid "CaptionText"
msgstr "BaşlıkMetni"

#: ../src/html/helpwnd.cpp:533
msgid "Case sensitive"
msgstr "Büyük küçük harfe duyarlı"

#: ../src/propgrid/manager.cpp:1509
msgid "Categorized Mode"
msgstr "Kategorize Kip"

#: ../src/richtext/richtextbuffer.cpp:9968
msgid "Cell Properties"
msgstr "Hücre Özellikleri"

#: ../src/common/fmapbase.cpp:161
msgid "Celtic (ISO-8859-14)"
msgstr "Keltçe (ISO-8859-14)"

#: ../src/richtext/richtextindentspage.cpp:160
#: ../src/richtext/richtextliststylepage.cpp:349
msgid "Cen&tred"
msgstr "Or&talanmış"

#: ../src/common/stockitem.cpp:170
msgid "Centered"
msgstr "Ortalanmış"

#: ../src/common/fmapbase.cpp:149
msgid "Central European (ISO-8859-2)"
msgstr "Orta Avrupa (ISO-8859-2)"

#: ../src/richtext/richtextliststylepage.cpp:250
#: ../src/richtext/richtextbulletspage.cpp:187
msgid "Centre"
msgstr "Orta"

#: ../src/richtext/richtextindentspage.cpp:162
#: ../src/richtext/richtextindentspage.cpp:164
#: ../src/richtext/richtextliststylepage.cpp:351
#: ../src/richtext/richtextliststylepage.cpp:353
msgid "Centre text."
msgstr "Metni ortala."

#: ../src/richtext/richtextsizepage.cpp:287
msgid "Centred"
msgstr "Ortalanmış"

#: ../src/richtext/richtextliststylepage.cpp:280
#: ../src/richtext/richtextbulletspage.cpp:219
msgid "Ch&oose..."
msgstr "S&eçin..."

#: ../src/richtext/richtextbuffer.cpp:4354
msgid "Change List Style"
msgstr "Liste Biçemini Değiştir"

#: ../src/richtext/richtextbuffer.cpp:3709
msgid "Change Object Style"
msgstr "Nesne Biçemini Değiştir"

#: ../src/richtext/richtextbuffer.cpp:3982
#: ../src/richtext/richtextbuffer.cpp:8129
msgid "Change Properties"
msgstr "Özellikleri Değiştir"

#: ../src/richtext/richtextbuffer.cpp:3526
msgid "Change Style"
msgstr "Biçemi Değiştir"

#: ../src/common/fileconf.cpp:341
#, c-format
msgid "Changes won't be saved to avoid overwriting the existing file \"%s\""
msgstr ""
"Varolan \"%s\" dosyasının üzerine yazılmasını önlemek için değişiklikler "
"kaydedilmeyecek"

#: ../src/gtk/filepicker.cpp:190 ../src/gtk/filedlg.cpp:87
#, c-format
msgid "Changing current directory to \"%s\" failed"
msgstr "Geçerli klasör \"%s\" olarak değiştirilemedi"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1757
msgid "Character"
msgstr "Karakter"

#: ../src/richtext/richtextstyles.cpp:1063
msgid "Character styles"
msgstr "Karakter biçemleri"

#: ../src/richtext/richtextliststylepage.cpp:224
#: ../src/richtext/richtextliststylepage.cpp:226
#: ../src/richtext/richtextbulletspage.cpp:161
#: ../src/richtext/richtextbulletspage.cpp:163
msgid "Check to add a period after the bullet."
msgstr "Madde iminin ardına nokta eklenmesi için işaretleyin."

#: ../src/richtext/richtextliststylepage.cpp:238
#: ../src/richtext/richtextliststylepage.cpp:240
#: ../src/richtext/richtextbulletspage.cpp:175
#: ../src/richtext/richtextbulletspage.cpp:177
msgid "Check to add a right parenthesis."
msgstr "Sağa bir parantez eklemek için işaretleyin."

#: ../src/richtext/richtextborderspage.cpp:383
#: ../src/richtext/richtextborderspage.cpp:385
#: ../src/richtext/richtextborderspage.cpp:551
#: ../src/richtext/richtextborderspage.cpp:553
msgid "Check to edit all borders simultaneously."
msgstr "Tüm kenarlıklara aynı anda uygulanması için işaretleyin."

#: ../src/richtext/richtextliststylepage.cpp:231
#: ../src/richtext/richtextliststylepage.cpp:233
#: ../src/richtext/richtextbulletspage.cpp:168
#: ../src/richtext/richtextbulletspage.cpp:170
msgid "Check to enclose the bullet in parentheses."
msgstr "Madde imini parantez içine almak için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:315
#: ../src/richtext/richtextfontpage.cpp:317
msgid "Check to indicate right-to-left text layout."
msgstr "Sağdan sola yazı için işaretleyin."

#: ../src/osx/carbon/fontdlg.cpp:356 ../src/osx/carbon/fontdlg.cpp:358
msgid "Check to make the font bold."
msgstr "Koyu yazı türü için işaretleyin."

#: ../src/osx/carbon/fontdlg.cpp:363 ../src/osx/carbon/fontdlg.cpp:365
msgid "Check to make the font italic."
msgstr "Yatık yazı türü için işaretleyin."

#: ../src/osx/carbon/fontdlg.cpp:372 ../src/osx/carbon/fontdlg.cpp:374
msgid "Check to make the font underlined."
msgstr "Altı çizili yazı türü için işaretleyin."

#: ../src/richtext/richtextstyledlg.cpp:289
#: ../src/richtext/richtextstyledlg.cpp:291
msgid "Check to restart numbering."
msgstr "Yeniden numaralandırmak için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:277
#: ../src/richtext/richtextfontpage.cpp:279
msgid "Check to show a line through the text."
msgstr "Metnin üzerini çizmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:284
#: ../src/richtext/richtextfontpage.cpp:286
msgid "Check to show the text in capitals."
msgstr "Metni büyük harfe dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:291
#: ../src/richtext/richtextfontpage.cpp:293
msgid "Check to show the text in small capitals."
msgstr "Metni küçük harfe dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:305
#: ../src/richtext/richtextfontpage.cpp:307
msgid "Check to show the text in subscript."
msgstr "Metni alt karaktere dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:298
#: ../src/richtext/richtextfontpage.cpp:300
msgid "Check to show the text in superscript."
msgstr "Metni üst karaktere dönüştürmek için işaretleyin."

#: ../src/richtext/richtextfontpage.cpp:322
#: ../src/richtext/richtextfontpage.cpp:324
msgid "Check to suppress hyphenation."
msgstr "Hecelemeyi engellemek için işaretleyin."

#: ../src/msw/dialup.cpp:763
msgid "Choose ISP to dial"
msgstr "Aranacak servis sağlayıcıyı seçin"

#: ../src/propgrid/props.cpp:1922
msgid "Choose a directory:"
msgstr "Bir klasör seçin:"

#: ../src/propgrid/props.cpp:1975
msgid "Choose a file"
msgstr "Bir dosya seçin"

#: ../src/generic/colrdlgg.cpp:158 ../src/gtk/colordlg.cpp:54
msgid "Choose colour"
msgstr "Renk seçin"

#: ../src/generic/fontpickerg.cpp:50 ../src/gtk/fontdlg.cpp:77
#: ../src/gtk1/fontdlg.cpp:125
msgid "Choose font"
msgstr "Yazı türü seçin"

#: ../src/common/module.cpp:74
#, c-format
msgid "Circular dependency involving module \"%s\" detected."
msgstr "\"%s\" modülü ile döngüsel bağlılık algılandı."

#: ../src/aui/tabmdi.cpp:108 ../src/generic/mdig.cpp:97
msgid "Cl&ose"
msgstr "Kapa&t"

#: ../src/msw/ole/automtn.cpp:684
msgid "Class not registered."
msgstr "Sınıf kaydedilmemiş."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:147 ../src/common/accelcmn.cpp:72
msgid "Clear"
msgstr "Temizle"

#: ../src/generic/logg.cpp:514
msgid "Clear the log contents"
msgstr "Günlük içeriğini temizleyin"

#: ../src/richtext/richtextstyledlg.cpp:252
#: ../src/richtext/richtextstyledlg.cpp:254
msgid "Click to apply the selected style."
msgstr "Seçili biçemi uygulamak için tıklayın."

#: ../src/richtext/richtextliststylepage.cpp:281
#: ../src/richtext/richtextliststylepage.cpp:283
#: ../src/richtext/richtextbulletspage.cpp:220
#: ../src/richtext/richtextbulletspage.cpp:222
msgid "Click to browse for a symbol."
msgstr "Bir simge seçmek için tıklayın."

#: ../src/osx/carbon/fontdlg.cpp:403 ../src/osx/carbon/fontdlg.cpp:405
msgid "Click to cancel changes to the font."
msgstr "Yazı türü değişikliklerinden vazgeçmek için tıklayın."

#: ../src/generic/fontdlgg.cpp:472 ../src/generic/fontdlgg.cpp:491
msgid "Click to cancel the font selection."
msgstr "Yazı türü seçiminden vazgeçmek için tıklayın."

#: ../src/osx/carbon/fontdlg.cpp:384 ../src/osx/carbon/fontdlg.cpp:386
msgid "Click to change the font colour."
msgstr "Metin rengini değiştirmek için tıklayın."

#: ../src/richtext/richtextfontpage.cpp:267
#: ../src/richtext/richtextfontpage.cpp:269
msgid "Click to change the text background colour."
msgstr "Metin art alan rengini değiştirmek için tıklayın."

#: ../src/richtext/richtextfontpage.cpp:254
#: ../src/richtext/richtextfontpage.cpp:256
msgid "Click to change the text colour."
msgstr "Metin rengini değiştirmek için tıklayın."

#: ../src/richtext/richtextliststylepage.cpp:195
#: ../src/richtext/richtextliststylepage.cpp:197
msgid "Click to choose the font for this level."
msgstr "Bu düzeyin yazı türünü seçmek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:279
#: ../src/richtext/richtextstyledlg.cpp:281
msgid "Click to close this window."
msgstr "Pencereyi kapatmak için tıklayın."

#: ../src/osx/carbon/fontdlg.cpp:410 ../src/osx/carbon/fontdlg.cpp:412
msgid "Click to confirm changes to the font."
msgstr "Yazı türündeki değişiklikleri onaylamak için tıklayın."

#: ../src/generic/fontdlgg.cpp:477 ../src/generic/fontdlgg.cpp:479
#: ../src/generic/fontdlgg.cpp:484 ../src/generic/fontdlgg.cpp:486
msgid "Click to confirm the font selection."
msgstr "Yazı türü seçimini onaylamak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:244
#: ../src/richtext/richtextstyledlg.cpp:246
msgid "Click to create a new box style."
msgstr "Yeni bir kutu biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:226
#: ../src/richtext/richtextstyledlg.cpp:228
msgid "Click to create a new character style."
msgstr "Yeni bir karakter biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:238
#: ../src/richtext/richtextstyledlg.cpp:240
msgid "Click to create a new list style."
msgstr "Yeni bir liste biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:232
#: ../src/richtext/richtextstyledlg.cpp:234
msgid "Click to create a new paragraph style."
msgstr "Yeni bir paragraf biçemi oluşturmak için tıklayın."

#: ../src/richtext/richtexttabspage.cpp:133
#: ../src/richtext/richtexttabspage.cpp:135
msgid "Click to create a new tab position."
msgstr "Yeni bir sekme konumu oluşturmak için tıklayın."

#: ../src/richtext/richtexttabspage.cpp:145
#: ../src/richtext/richtexttabspage.cpp:147
msgid "Click to delete all tab positions."
msgstr "Tüm sekme konumlarını silmek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:270
#: ../src/richtext/richtextstyledlg.cpp:272
msgid "Click to delete the selected style."
msgstr "Seçili biçemi silmek için tıklayın."

#: ../src/richtext/richtexttabspage.cpp:139
#: ../src/richtext/richtexttabspage.cpp:141
msgid "Click to delete the selected tab position."
msgstr "Seçili sekme konumunu silmek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:264
#: ../src/richtext/richtextstyledlg.cpp:266
msgid "Click to edit the selected style."
msgstr "Seçili biçemi düzenlemek için tıklayın."

#: ../src/richtext/richtextstyledlg.cpp:258
#: ../src/richtext/richtextstyledlg.cpp:260
msgid "Click to rename the selected style."
msgstr "Seçili biçemi yeniden adlandırmak için tıklayın."

#: ../src/aui/tabmdi.cpp:109 ../src/generic/mdig.cpp:98
msgid "Close All"
msgstr "Tümünü Kapat"

#: ../src/common/stockitem.cpp:266
msgid "Close current document"
msgstr "Geçerli belgeyi kapat"

#: ../src/generic/logg.cpp:516
msgid "Close this window"
msgstr "Bu pencereyi kapat"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6006
msgid "Collapse"
msgstr "Daralt"

#: ../src/richtext/richtextformatdlg.cpp:776
msgid "Colour"
msgstr "Renk"

#: ../src/msw/colordlg.cpp:158
#, c-format
msgid "Colour selection dialog failed with error %0lx."
msgstr "Renk seçimi penceresi %0lx hatasıyla sonlandı."

#: ../src/osx/carbon/fontdlg.cpp:380
msgid "Colour:"
msgstr "Renk:"

#: ../src/generic/datavgen.cpp:6077
#, c-format
msgid "Column %u"
msgstr "Sütun %u"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:114
msgid "Command"
msgstr "Komut"

#: ../src/common/init.cpp:196
#, c-format
msgid ""
"Command line argument %d couldn't be converted to Unicode and will be "
"ignored."
msgstr "%d komut satırı değişkeni Unikoda çevrilemediğinden yok sayılacak."

#: ../src/msw/fontdlg.cpp:120
#, c-format
msgid "Common dialog failed with error code %0lx."
msgstr "Ortak diyalog %0lx hata koduyla sonlandı."

#: ../src/gtk/window.cpp:4649
msgid ""
"Compositing not supported by this system, please enable it in your Window "
"Manager."
msgstr ""
"Sistemin birleştirme (compositing) desteği etkin değil. Lütfen Pencere "
"Yöneticinizden etkinleştirin."

#: ../src/html/helpwnd.cpp:1551
msgid "Compressed HTML Help file (*.chm)|*.chm|"
msgstr "Sıkıştırılmış HTML Yardım dosyası (*.chm)|*.chm|"

#: ../src/generic/dirctrlg.cpp:444
msgid "Computer"
msgstr "Bilgisayarım"

#: ../src/common/fileconf.cpp:934
#, c-format
msgid "Config entry name cannot start with '%c'."
msgstr "Ayar kaydının adı '%c' ile başlayamaz."

#: ../src/generic/filedlgg.cpp:349 ../src/gtk/filedlg.cpp:60
msgid "Confirm"
msgstr "Onayla"

#: ../src/html/htmlwin.cpp:566
msgid "Connecting..."
msgstr "Bağlanılıyor..."

#: ../src/html/helpwnd.cpp:475
msgid "Contents"
msgstr "İçerik"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:880
msgid "ControlDark"
msgstr "DenetimKoyu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:881
msgid "ControlLight"
msgstr "DenetimAçık"

#: ../src/common/strconv.cpp:2262
#, c-format
msgid "Conversion to charset '%s' doesn't work."
msgstr "'%s' karakter kümesine dönüşüm çalışmıyor."

#: ../src/common/stockitem.cpp:149
msgid "Convert"
msgstr "Dönüştür"

#: ../src/html/htmlwin.cpp:1079
#, c-format
msgid "Copied to clipboard:\"%s\""
msgstr "\"%s\" panoya kopyalandı."

#: ../src/generic/prntdlgg.cpp:247
msgid "Copies:"
msgstr "Kopya sayısı:"

#: ../src/common/stockitem.cpp:258
msgid "Copy selection"
msgstr "Seçimi kopyala"

#: ../src/richtext/richtextborderspage.cpp:566
#: ../src/richtext/richtextborderspage.cpp:601
msgid "Corner"
msgstr "Köşe"

#: ../src/richtext/richtextborderspage.cpp:575
msgid "Corner &radius:"
msgstr "Köşe ça&pı:"

#: ../src/html/chm.cpp:718
#, c-format
msgid "Could not create temporary file '%s'"
msgstr "'%s' geçici dosyası oluşturulamadı."

#: ../src/html/chm.cpp:273
#, c-format
msgid "Could not extract %s into %s: %s"
msgstr "%s %s içine ayıklanamadı: %s"

#: ../src/generic/tabg.cpp:1048
msgid "Could not find tab for id"
msgstr "Kodun sekmesi bulunamadı."

#: ../src/gtk/notifmsg.cpp:108
msgid "Could not initalize libnotify."
msgstr "Libnotify başlatılamadı."

#: ../src/html/chm.cpp:444
#, c-format
msgid "Could not locate file '%s'."
msgstr "'%s' dosyası bulunamadı."

#: ../src/common/filefn.cpp:1403
msgid "Could not set current working directory"
msgstr "Geçerli çalışma klasörü ayarlanamadı."

#: ../src/common/prntbase.cpp:2015
msgid "Could not start document preview."
msgstr "Belge önizlemesi başlatılamadı."

#: ../src/generic/printps.cpp:178 ../src/msw/printwin.cpp:210
#: ../src/gtk/print.cpp:1132
msgid "Could not start printing."
msgstr "Yazdırma başlatılamadı."

#: ../src/common/wincmn.cpp:2125
msgid "Could not transfer data to window"
msgstr "Veri pencereye aktarılamadı."

#: ../src/msw/imaglist.cpp:187 ../src/msw/imaglist.cpp:224
#: ../src/msw/imaglist.cpp:249 ../src/msw/dragimag.cpp:185
#: ../src/msw/dragimag.cpp:220
msgid "Couldn't add an image to the image list."
msgstr "Görsel listesine bir görsel eklenemedi."

#: ../src/osx/glcanvas_osx.cpp:414 ../src/unix/glx11.cpp:558
#: ../src/msw/glcanvas.cpp:616
msgid "Couldn't create OpenGL context"
msgstr "OpenGL bağlamı oluşturulamadı"

#: ../src/msw/timer.cpp:134
msgid "Couldn't create a timer"
msgstr "Bir zamanlayıcı oluşturulamadı."

#: ../src/osx/carbon/overlay.cpp:122
msgid "Couldn't create the overlay window"
msgstr "Örtüşme penceresi oluşturulamadı."

#: ../src/common/translation.cpp:2024
msgid "Couldn't enumerate translations"
msgstr "Çeviriler sayılamadı."

#: ../src/common/dynlib.cpp:120
#, c-format
msgid "Couldn't find symbol '%s' in a dynamic library"
msgstr "'%s' simgesi devingen kitaplıkta bulunamadı."

#: ../src/msw/thread.cpp:915
msgid "Couldn't get the current thread pointer"
msgstr "Geçerli iş parçacığı imleci alınamadı."

#: ../src/osx/carbon/overlay.cpp:129
msgid "Couldn't init the context on the overlay window"
msgstr "Örtüşme penceresinde bağlam başlatılamadı."

#: ../src/common/imaggif.cpp:244
msgid "Couldn't initialize GIF hash table."
msgstr "GIF hash tablosu başlatılamadı."

#: ../src/common/imagpng.cpp:409
msgid "Couldn't load a PNG image - file is corrupted or not enough memory."
msgstr "PNG görseli yüklenemedi - dosya bozuk ya da bellek yetersiz."

#: ../src/unix/sound.cpp:470
#, c-format
msgid "Couldn't load sound data from '%s'."
msgstr "Ses verisi '%s' içinden yüklenemedi."

#: ../src/msw/dirdlg.cpp:435
msgid "Couldn't obtain folder name"
msgstr "Klasör adı alınamadı."

#: ../src/unix/sound_sdl.cpp:229
#, c-format
msgid "Couldn't open audio: %s"
msgstr "Ses açılamadı: %s"

#: ../src/msw/ole/dataobj.cpp:377
#, c-format
msgid "Couldn't register clipboard format '%s'."
msgstr "'%s' pano biçimi kaydedilemedi."

#: ../src/msw/listctrl.cpp:869
#, c-format
msgid "Couldn't retrieve information about list control item %d."
msgstr "%d liste denetimi ögesi hakkında bilgi alınamadı."

#: ../src/common/imagpng.cpp:498 ../src/common/imagpng.cpp:509
#: ../src/common/imagpng.cpp:519
msgid "Couldn't save PNG image."
msgstr "PNG görseli kaydedilemedi."

#: ../src/msw/thread.cpp:684
msgid "Couldn't terminate thread"
msgstr "İş parçacığı sonlandırılamadı."

#: ../src/common/xtistrm.cpp:166
#, c-format
msgid "Create Parameter %s not found in declared RTTI Parameters"
msgstr "'Create Parameter' %s bildirilen RTTI parametreleri içinde bulunamadı."

#: ../src/generic/dirdlgg.cpp:288
msgid "Create directory"
msgstr "Klasör oluştur"

#: ../src/generic/filedlgg.cpp:212 ../src/generic/dirdlgg.cpp:111
msgid "Create new directory"
msgstr "Yeni klasör oluştur"

#: ../src/xrc/xmlres.cpp:2460
#, c-format
msgid "Creating %s \"%s\" failed."
msgstr "%s \"%s\" oluşturulamadı."

#: ../src/common/accelcmn.cpp:333
msgid "Ctrl+"
msgstr "Ctrl+"

#: ../src/richtext/richtextctrl.cpp:332 ../src/osx/textctrl_osx.cpp:576
#: ../src/common/stockitem.cpp:151 ../src/msw/textctrl.cpp:2507
msgid "Cu&t"
msgstr "&Kesin"

#: ../src/generic/filectrlg.cpp:940
msgid "Current directory:"
msgstr "Geçerli klasör:"

#: ../src/gtk/print.cpp:217
msgid "Custom size"
msgstr "Özel boyut"

#: ../src/common/headerctrlcmn.cpp:60
msgid "Customize Columns"
msgstr "Sütunları Özelleştir"

#: ../src/common/stockitem.cpp:259
msgid "Cut selection"
msgstr "Seçimi kes"

#: ../src/common/fmapbase.cpp:152
msgid "Cyrillic (ISO-8859-5)"
msgstr "Kril (ISO-8859-5)"

#: ../src/common/paper.cpp:99
msgid "D sheet, 22 x 34 in"
msgstr "D sayfa, 22 x 34 inç"

#: ../src/msw/dde.cpp:703
msgid "DDE poke request failed"
msgstr "DDE itme isteği yapılamadı."

#: ../src/common/imagbmp.cpp:1169
msgid "DIB Header: Encoding doesn't match bitdepth."
msgstr "DIB Başlık Bilgisi: Kodlama, bit derinliğine uymuyor."

#: ../src/common/imagbmp.cpp:1074
msgid "DIB Header: Image height > 32767 pixels for file."
msgstr "DIB Başlık Bilgisi: Dosya için görsel yüksekliği > 32767 piksel."

#: ../src/common/imagbmp.cpp:1066
msgid "DIB Header: Image width > 32767 pixels for file."
msgstr "DIB Başlık Bilgisi: Dosya için görsel genişliği > 32767 piksel."

#: ../src/common/imagbmp.cpp:1094
msgid "DIB Header: Unknown bitdepth in file."
msgstr "DIB Başlık Bilgisi: Dosyada bilinmeyen bit derinliği."

#: ../src/common/imagbmp.cpp:1149
msgid "DIB Header: Unknown encoding in file."
msgstr "DIB Başlık Bilgisi: Dosyada bilinmeyen kodlama."

#: ../src/common/paper.cpp:121
msgid "DL Envelope, 110 x 220 mm"
msgstr "DL Zarf, 110 x 220 mm"

#: ../src/richtext/richtextborderspage.cpp:613
msgid "Dashed"
msgstr "Çizgili"

#: ../src/generic/dbgrptg.cpp:300
#, c-format
msgid "Debug report \"%s\""
msgstr "Hata ayıklama raporu \"%s\""

#: ../src/common/debugrpt.cpp:210
msgid "Debug report couldn't be created."
msgstr "Hata ayıklama raporu oluşturulamadı."

#: ../src/common/debugrpt.cpp:553
msgid "Debug report generation has failed."
msgstr "Hata ayıklama raporu oluşturulamadı."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:84
msgid "Decimal"
msgstr "Ondalık"

#: ../src/generic/fontdlgg.cpp:323
msgid "Decorative"
msgstr "Süslü"

#: ../src/common/fmapbase.cpp:796
msgid "Default encoding"
msgstr "Varsayılan kodlama"

#: ../src/dfb/fontmgr.cpp:180
msgid "Default font"
msgstr "Varsayılan yazı türü"

#: ../src/generic/prntdlgg.cpp:510
msgid "Default printer"
msgstr "Varsayılan yazıcı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:51
msgid "Del"
msgstr "Del"

#: ../src/richtext/richtexttabspage.cpp:144
msgid "Delete A&ll"
msgstr "Tümünü Si&l"

#: ../src/richtext/richtextbuffer.cpp:11341
msgid "Delete Column"
msgstr "Sütunu Sil"

#: ../src/richtext/richtextbuffer.cpp:11291
msgid "Delete Row"
msgstr "Satırı Sil"

#: ../src/richtext/richtextstyledlg.cpp:782
msgid "Delete Style"
msgstr "Biçemi Sil"

#: ../src/richtext/richtextctrl.cpp:1345 ../src/richtext/richtextctrl.cpp:1584
msgid "Delete Text"
msgstr "Metni Sil"

#: ../src/generic/editlbox.cpp:170
msgid "Delete item"
msgstr "Ögeyi Sil"

#: ../src/common/stockitem.cpp:260
msgid "Delete selection"
msgstr "Seçimi sil"

#: ../src/richtext/richtextstyledlg.cpp:782
#, c-format
msgid "Delete style %s?"
msgstr "%s biçemi silinsin mi?"

#: ../src/unix/snglinst.cpp:301
#, c-format
msgid "Deleted stale lock file '%s'."
msgstr "Eski kilit dosyası '%s' silindi."

#: ../src/common/secretstore.cpp:220
#, c-format
msgid "Deleting password for \"%s/%s\" failed: %s."
msgstr "\"%s/%s\" için parola silinemedi: %s."

#: ../src/common/module.cpp:124
#, c-format
msgid "Dependency \"%s\" of module \"%s\" doesn't exist."
msgstr "\"%s\" bağlılığı \"%s\" modülü için bulunamadı."

#: ../src/common/stockitem.cpp:196
msgid "Descending"
msgstr "Azalan"

#. TRANSLATORS: Keyword of system colour
#: ../src/generic/dirctrlg.cpp:526 ../src/propgrid/advprops.cpp:882
msgid "Desktop"
msgstr "Masaüstü"

#: ../src/generic/aboutdlgg.cpp:70
msgid "Developed by "
msgstr "Geliştirici "

#: ../src/generic/aboutdlgg.cpp:176
msgid "Developers"
msgstr "Geliştiriciler"

#: ../src/msw/dialup.cpp:374
msgid ""
"Dial up functions are unavailable because the remote access service (RAS) is "
"not installed on this machine. Please install it."
msgstr ""
"Uzaktan erişim hizmeti (RAS) kurulu olmadığı için arama işlevleri "
"kullanılamıyor. Lütfen kurun."

#: ../src/generic/tipdlg.cpp:211
msgid "Did you know..."
msgstr "Biliyor musunuz..."

#: ../src/dfb/wrapdfb.cpp:63
#, c-format
msgid "DirectFB error %d occurred."
msgstr "%d DirectFB hatası oluştu."

#: ../src/motif/filedlg.cpp:219
msgid "Directories"
msgstr "Klasörler"

#: ../src/common/filefn.cpp:1183
#, c-format
msgid "Directory '%s' couldn't be created"
msgstr "'%s' klasörü oluşturulamadı"

#: ../src/common/filefn.cpp:1197
#, c-format
msgid "Directory '%s' couldn't be deleted"
msgstr "'%s' klasörü silinemedi"

#: ../src/generic/dirdlgg.cpp:204
msgid "Directory does not exist"
msgstr "Klasör bulunamadı"

#: ../src/generic/filectrlg.cpp:1399
msgid "Directory doesn't exist."
msgstr "Klasör bulunamadı."

#: ../src/common/docview.cpp:457
msgid "Discard changes and reload the last saved version?"
msgstr "Değişiklikler iptal edilip son kaydedilmiş sürüme dönülsün mü?"

#: ../src/html/helpwnd.cpp:502
msgid ""
"Display all index items that contain given substring. Search is case "
"insensitive."
msgstr ""
"Verilen alt dizgeyi içeren tüm dizin elemanları görüntülensin. Arama küçük-"
"büyük harfe duyarlıdır."

#: ../src/html/helpwnd.cpp:679
msgid "Display options dialog"
msgstr "Ayarlar penceresi görüntülensin"

#: ../src/html/helpwnd.cpp:322
msgid "Displays help as you browse the books on the left."
msgstr "Soldaki kitapları gezilirken yardım görüntülenir."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:85
msgid "Divide"
msgstr "Bölü"

#: ../src/common/docview.cpp:533
#, c-format
msgid "Do you want to save changes to %s?"
msgstr "%s üzerinde yapılan değişiklikleri kaydetmek istiyor musunuz?"

#: ../src/common/prntbase.cpp:542
msgid "Document:"
msgstr "Belge:"

#: ../src/generic/aboutdlgg.cpp:73
msgid "Documentation by "
msgstr "Belgeleyen "

#: ../src/generic/aboutdlgg.cpp:180
msgid "Documentation writers"
msgstr "Belge yazarları"

#: ../src/common/sizer.cpp:2799
msgid "Don't Save"
msgstr "Kaydedilmesin"

#: ../src/html/htmlwin.cpp:633
msgid "Done"
msgstr "Tamamlandı"

#: ../src/generic/progdlgg.cpp:448 ../src/msw/progdlg.cpp:407
msgid "Done."
msgstr "Tamamlandı."

#: ../src/richtext/richtextborderspage.cpp:612
msgid "Dotted"
msgstr "Noktalı"

#: ../src/richtext/richtextborderspage.cpp:614
msgid "Double"
msgstr "Çift"

#: ../src/common/paper.cpp:176
msgid "Double Japanese Postcard Rotated 148 x 200 mm"
msgstr "Japon Çift Postakartı Çevrilmiş 148 x 200 mm"

#: ../src/common/xtixml.cpp:273
#, c-format
msgid "Doubly used id : %d"
msgstr "Kod iki kez kullanılmış: %d"

#. TRANSLATORS: Name of keyboard key
#: ../src/generic/fdrepdlg.cpp:152 ../src/common/stockitem.cpp:153
#: ../src/common/accelcmn.cpp:64
msgid "Down"
msgstr "Aşağı"

#: ../src/common/paper.cpp:100
msgid "E sheet, 34 x 44 in"
msgstr "E sayfa, 34 x 44 inç"

#: ../src/unix/fswatcher_inotify.cpp:561
msgid "EOF while reading from inotify descriptor"
msgstr "inotify belirteci okunurken dosya sonuna ulaşıldı"

#: ../src/generic/editlbox.cpp:168
msgid "Edit item"
msgstr "Ögeyi düzenle"

#: ../include/wx/generic/progdlgg.h:84
msgid "Elapsed time:"
msgstr "Geçen süre:"

#: ../src/richtext/richtextsizepage.cpp:353
#: ../src/richtext/richtextsizepage.cpp:355
#: ../src/richtext/richtextsizepage.cpp:465
#: ../src/richtext/richtextsizepage.cpp:467
msgid "Enable the height value."
msgstr "Yükseklik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:438
#: ../src/richtext/richtextsizepage.cpp:440
msgid "Enable the maximum width value."
msgstr "En büyük genişlik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:411
#: ../src/richtext/richtextsizepage.cpp:413
msgid "Enable the minimum height value."
msgstr "En büyük yükseklik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:384
#: ../src/richtext/richtextsizepage.cpp:386
msgid "Enable the minimum width value."
msgstr "En küçük genişlik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:319
#: ../src/richtext/richtextsizepage.cpp:321
msgid "Enable the width value."
msgstr "Genişlik değeri kullanılsın."

#: ../src/richtext/richtextsizepage.cpp:280
#: ../src/richtext/richtextsizepage.cpp:282
msgid "Enable vertical alignment."
msgstr "Dikey hizalama kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:162
#: ../src/richtext/richtextbackgroundpage.cpp:164
msgid "Enables a background colour."
msgstr "Art alan rengi kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:196
#: ../src/richtext/richtextbackgroundpage.cpp:198
msgid "Enables a shadow."
msgstr "Gölge kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:300
#: ../src/richtext/richtextbackgroundpage.cpp:302
msgid "Enables the blur distance."
msgstr "Bulanıklık uzaklığı kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:260
#: ../src/richtext/richtextbackgroundpage.cpp:262
msgid "Enables the shadow colour."
msgstr "Gölge rengi kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:327
#: ../src/richtext/richtextbackgroundpage.cpp:329
msgid "Enables the shadow opacity."
msgstr "Gölge matlığı kullanılsın."

#: ../src/richtext/richtextbackgroundpage.cpp:273
#: ../src/richtext/richtextbackgroundpage.cpp:275
msgid "Enables the shadow spread."
msgstr "Gölge yayma kullanılsın."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:66
msgid "End"
msgstr "End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:55
msgid "Enter"
msgstr "Enter"

#: ../src/richtext/richtextstyledlg.cpp:934
msgid "Enter a box style name"
msgstr "Bir kutu biçemi adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:606
msgid "Enter a character style name"
msgstr "Bir karakter biçemi adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:820
msgid "Enter a list style name"
msgstr "Bir liste biçemi adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:893
msgid "Enter a new style name"
msgstr "Yeni bir biçem adı yazın"

#: ../src/richtext/richtextstyledlg.cpp:654
msgid "Enter a paragraph style name"
msgstr "Bir paragraf biçemi adı yazın"

#: ../src/generic/dbgrptg.cpp:174
#, c-format
msgid "Enter command to open file \"%s\":"
msgstr "\"%s\" dosyasını açacak komutu yazın:"

#: ../src/generic/helpext.cpp:459
msgid "Entries found"
msgstr "Bulunan kayıt"

#: ../src/common/paper.cpp:142
msgid "Envelope Invite 220 x 220 mm"
msgstr "Davetiye Zarf 220 x 220 mm"

#: ../src/common/config.cpp:469
#, c-format
msgid ""
"Environment variables expansion failed: missing '%c' at position %u in '%s'."
msgstr "Ortam değişkenleri açılamadı: eksik '%c', konum %u, '%s' içinde."

#: ../src/unix/epolldispatcher.cpp:103
msgid "Error closing epoll descriptor"
msgstr "Epoll tanımlayıcı kapatma hatası"

#: ../src/unix/fswatcher_kqueue.cpp:114
msgid "Error closing kqueue instance"
msgstr "Kqueue kopyası kapatılırken hata"

#: ../src/common/filefn.cpp:1049
#, c-format
msgid "Error copying the file '%s' to '%s'."
msgstr "'%s' dosyası '%s' içine kopyalanamadı."

#: ../src/generic/dirdlgg.cpp:222
msgid "Error creating directory"
msgstr "Klasör oluşturulurken sorun çıktı"

#: ../src/common/imagbmp.cpp:1181
msgid "Error in reading image DIB."
msgstr "DIB görüntüsü okuma sorunu."

#: ../src/propgrid/propgrid.cpp:6696
#, c-format
msgid "Error in resource: %s"
msgstr "%s kaynağında sorun"

#: ../src/common/fileconf.cpp:422
msgid "Error reading config options."
msgstr "Ayarlar okunurken sorun çıktı."

#: ../src/common/fileconf.cpp:1029
msgid "Error saving user configuration data."
msgstr "Kullanıcı ayarları kaydedilirken sorun çıktı."

#: ../src/gtk/print.cpp:722
msgid "Error while printing: "
msgstr "Yazdırma sorunu: "

#: ../src/common/log.cpp:219
msgid "Error: "
msgstr "Hata: "

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:69
msgid "Esc"
msgstr "Esc"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:70
msgid "Escape"
msgstr "Escape"

#: ../src/common/fmapbase.cpp:150
msgid "Esperanto (ISO-8859-3)"
msgstr "Esperanto (ISO-8859-3)"

#: ../include/wx/generic/progdlgg.h:85
msgid "Estimated time:"
msgstr "Öngörülen süre:"

#: ../src/generic/dbgrptg.cpp:234
msgid "Executable files (*.exe)|*.exe|"
msgstr "Yürütülebilir dosyalar (*.exe)|*.exe|"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:155 ../src/common/accelcmn.cpp:78
msgid "Execute"
msgstr "Yürüt"

#: ../src/msw/utilsexc.cpp:876
#, c-format
msgid "Execution of command '%s' failed"
msgstr "'%s' komutu yürütülemedi"

#: ../src/common/paper.cpp:105
msgid "Executive, 7 1/4 x 10 1/2 in"
msgstr "Executive, 7 1/4 x 10 1/2 inç"

#. TRANSLATORS: Action for manipulating a tree control
#: ../src/generic/datavgen.cpp:6009
msgid "Expand"
msgstr "Genişlet"

#: ../src/msw/registry.cpp:1240
#, c-format
msgid ""
"Exporting registry key: file \"%s\" already exists and won't be overwritten."
msgstr "Kayıt anahtarı verme: \"%s\" dosyası zaten var, üzerine yazılmayacak."

#: ../src/common/fmapbase.cpp:195
msgid "Extended Unix Codepage for Japanese (EUC-JP)"
msgstr "Japonca için genişletilmiş Unix Codepage (EUC-JP)"

#: ../src/html/chm.cpp:725
#, c-format
msgid "Extraction of '%s' into '%s' failed."
msgstr "'%s'', '%s' içine açılamadı."

#: ../src/common/accelcmn.cpp:249 ../src/common/accelcmn.cpp:344
msgid "F"
msgstr "F"

#. TRANSLATORS: Label of font face name
#: ../src/propgrid/advprops.cpp:672
msgid "Face Name"
msgstr "Yazı Türü Adı"

#: ../src/unix/snglinst.cpp:269
msgid "Failed to access lock file."
msgstr "Kilit dosyasına erişilemedi."

#: ../src/unix/epolldispatcher.cpp:116
#, c-format
msgid "Failed to add descriptor %d to epoll descriptor %d"
msgstr "%d tanımlayıcısı %d epoll tanımlayısıcına eklenemedi"

#: ../src/msw/dib.cpp:489
#, c-format
msgid "Failed to allocate %luKb of memory for bitmap data."
msgstr "Bit eşlem verisi için %luKb bellek ayrılamadı."

#: ../src/common/glcmn.cpp:115
msgid "Failed to allocate colour for OpenGL"
msgstr "OpenGL için renk ayarlanamadı"

#: ../src/unix/displayx11.cpp:236
msgid "Failed to change video mode"
msgstr "Görüntü kipi değiştirilemedi"

#: ../src/common/image.cpp:3277
#, c-format
msgid "Failed to check format of image file \"%s\"."
msgstr "\"%s\" görsel dosyasının biçimi denetlenemedi."

#: ../src/common/debugrpt.cpp:239
#, c-format
msgid "Failed to clean up debug report directory \"%s\""
msgstr "\"%s\" hata ayıklama rapor klasörü temizlenemedi"

#: ../src/common/filename.cpp:192
msgid "Failed to close file handle"
msgstr "Dosya işleyici kapatılamadı"

#: ../src/unix/snglinst.cpp:340
#, c-format
msgid "Failed to close lock file '%s'"
msgstr "'%s' kilit dosyası kapatılamadı"

#: ../src/msw/clipbrd.cpp:112
msgid "Failed to close the clipboard."
msgstr "Pano kapatılamadı."

#: ../src/x11/utils.cpp:208
#, c-format
msgid "Failed to close the display \"%s\""
msgstr "\"%s\" görüntüsü kapatılamadı"

#: ../src/msw/dialup.cpp:797
msgid "Failed to connect: missing username/password."
msgstr "Bağlanılamadı: kullanıcı adı/parola eksik."

#: ../src/msw/dialup.cpp:743
msgid "Failed to connect: no ISP to dial."
msgstr "Bağlanılamadı: aranacak ISS yok."

#: ../src/common/textfile.cpp:203
#, c-format
msgid "Failed to convert file \"%s\" to Unicode."
msgstr "\"%s\" dosyası Unikoda çevrilemedi."

#: ../src/generic/logg.cpp:956
msgid "Failed to copy dialog contents to the clipboard."
msgstr "Pencere içeriği panoya kopyalanamadı."

#: ../src/msw/registry.cpp:692
#, c-format
msgid "Failed to copy registry value '%s'"
msgstr "'%s' kayıt değeri kopyalanamadı"

#: ../src/msw/registry.cpp:701
#, c-format
msgid "Failed to copy the contents of registry key '%s' to '%s'."
msgstr "'%s' kayıt anahtarının içeriği '%s' içine kopyalanamadı."

#: ../src/common/filefn.cpp:1015
#, c-format
msgid "Failed to copy the file '%s' to '%s'"
msgstr "'%s' dosyası '%s' içine kopyalanamadı"

#: ../src/msw/registry.cpp:679
#, c-format
msgid "Failed to copy the registry subkey '%s' to '%s'."
msgstr "'%s' kayıt alt anahtarı '%s' içine kopyalanamadı."

#: ../src/msw/dde.cpp:1070
msgid "Failed to create DDE string"
msgstr "DDE dizgesi oluşturulamadı"

#: ../src/msw/mdi.cpp:616
msgid "Failed to create MDI parent frame."
msgstr "MDI üst çerçevesi oluşturulamadı."

#: ../src/common/filename.cpp:1027
msgid "Failed to create a temporary file name"
msgstr "Geçici dosya adı oluşturulamadı"

#: ../src/msw/utilsexc.cpp:228
msgid "Failed to create an anonymous pipe"
msgstr "Anonim bir boru oluşturulamadı"

#: ../src/msw/ole/automtn.cpp:522
#, c-format
msgid "Failed to create an instance of \"%s\""
msgstr "\"%s\" kopyası oluşturulamadı"

#: ../src/msw/dde.cpp:437
#, c-format
msgid "Failed to create connection to server '%s' on topic '%s'"
msgstr "'%s' sunucusuna '%s' konusundan bağlantı kurulamadı"

#: ../src/msw/cursor.cpp:204
msgid "Failed to create cursor."
msgstr "İmleç oluşturulamadı."

#: ../src/common/debugrpt.cpp:209
#, c-format
msgid "Failed to create directory \"%s\""
msgstr "\"%s\" klasörü oluşturulamadı"

#: ../src/generic/dirdlgg.cpp:220
#, c-format
msgid ""
"Failed to create directory '%s'\n"
"(Do you have the required permissions?)"
msgstr ""
"'%s' klasörü oluşturulamadı\n"
"(Yeterli izniniz var mı?)"

#: ../src/unix/epolldispatcher.cpp:84
msgid "Failed to create epoll descriptor"
msgstr "Epoll tanımlayıcısı oluşturulamadı"

#: ../src/msw/mimetype.cpp:238
#, c-format
msgid "Failed to create registry entry for '%s' files."
msgstr "'%s' dosyaları için kayıt anahtarı oluşturulamadı."

#: ../src/msw/fdrepdlg.cpp:409
#, c-format
msgid "Failed to create the standard find/replace dialog (error code %d)"
msgstr "Standart bul/değiştir penceresi oluşturulamadı (hata kodu %d)"

#: ../src/unix/wakeuppipe.cpp:52
msgid "Failed to create wake up pipe used by event loop."
msgstr "Olay döngüsünde kullanılan uyandırma borusu oluşturulamadı."

#: ../src/html/winpars.cpp:730
#, c-format
msgid "Failed to display HTML document in %s encoding"
msgstr "HTML belgesi %s kodlamasıyla görüntülenemedi"

#: ../src/msw/clipbrd.cpp:124
msgid "Failed to empty the clipboard."
msgstr "Pano temizlenemedi."

#: ../src/unix/displayx11.cpp:212
msgid "Failed to enumerate video modes"
msgstr "Görüntü kipleri sıralanamadı"

#: ../src/msw/dde.cpp:722
msgid "Failed to establish an advise loop with DDE server"
msgstr "DDE sunucusuyla danışma döngüsü sağlanamadı"

#: ../src/msw/dialup.cpp:629 ../src/msw/dialup.cpp:863
#, c-format
msgid "Failed to establish dialup connection: %s"
msgstr "Çevirmeli bağlantı gerçekleştirilemedi: %s"

#: ../src/unix/utilsunx.cpp:611
#, c-format
msgid "Failed to execute '%s'\n"
msgstr "'%s' çalıştırılamadı\n"

#: ../src/common/debugrpt.cpp:720
msgid "Failed to execute curl, please install it in PATH."
msgstr "Curl çalıştırılamadı, lütfen YOL içine yükleyin."

#: ../src/msw/ole/automtn.cpp:505
#, c-format
msgid "Failed to find CLSID of \"%s\""
msgstr "\"%s\" için CLSID bulunamadı"

#: ../src/common/regex.cpp:431 ../src/common/regex.cpp:479
#, c-format
msgid "Failed to find match for regular expression: %s"
msgstr "Kurallı ifadeye uygun veri bulunamadı: %s"

#: ../src/msw/dialup.cpp:695
#, c-format
msgid "Failed to get ISP names: %s"
msgstr "ISS adları alınamadı: %s"

#: ../src/msw/ole/automtn.cpp:574
#, c-format
msgid "Failed to get OLE automation interface for \"%s\""
msgstr "\"%s\" için OLE otomasyonu arayüzü getirilemedi"

#: ../src/msw/clipbrd.cpp:711
msgid "Failed to get data from the clipboard"
msgstr "Panodan veri alınamadı"

#: ../src/common/time.cpp:223
msgid "Failed to get the local system time"
msgstr "Yerel sistem zamanı alınamadı"

#: ../src/common/filefn.cpp:1345
msgid "Failed to get the working directory"
msgstr "Çalışma klasörü alınamadı"

#: ../src/univ/theme.cpp:114
msgid "Failed to initialize GUI: no built-in themes found."
msgstr "GUI başlatılamadı: içsel bir tema bulunamadı."

#: ../src/msw/helpchm.cpp:63
msgid "Failed to initialize MS HTML Help."
msgstr "MS HTML Yardım başlatılamadı."

#: ../src/msw/glcanvas.cpp:1381
msgid "Failed to initialize OpenGL"
msgstr "OpenGL başlatılamadı"

#: ../src/msw/dialup.cpp:858
#, c-format
msgid "Failed to initiate dialup connection: %s"
msgstr "Çevirmeli bağlantı başlatılamadı: %s"

#: ../src/gtk/textctrl.cpp:1128
msgid "Failed to insert text in the control."
msgstr "Metin denetime eklenemedi."

#: ../src/unix/snglinst.cpp:241
#, c-format
msgid "Failed to inspect the lock file '%s'"
msgstr "'%s' kilit dosyası incelenemedi"

#: ../src/unix/appunix.cpp:182
msgid "Failed to install signal handler"
msgstr "İşaret işleyici kurulamadı"

#: ../src/unix/threadpsx.cpp:1167
msgid ""
"Failed to join a thread, potential memory leak detected - please restart the "
"program"
msgstr ""
"İş parçacığına bağlanılamadı, olası bellek taşması bulundu - lütfen programı "
"yeniden başlatın"

#: ../src/msw/utils.cpp:629
#, c-format
msgid "Failed to kill process %d"
msgstr "%d işlemi sonlandırılamadı"

#: ../src/common/image.cpp:2500
#, c-format
msgid "Failed to load bitmap \"%s\" from resources."
msgstr "Kaynaklardan \"%s\" bit eşlemi yüklenemedi."

#: ../src/common/image.cpp:2509
#, c-format
msgid "Failed to load icon \"%s\" from resources."
msgstr "Kaynaklardan \"%s\" simgesi yüklenemedi."

#: ../src/common/iconbndl.cpp:225
#, c-format
msgid "Failed to load icons from resource '%s'."
msgstr "'%s' kaynağından simgeler yüklenemedi."

#: ../src/common/iconbndl.cpp:200
#, c-format
msgid "Failed to load image %%d from file '%s'."
msgstr "%%d görseli '%s' dosyasından yüklenemedi."

#: ../src/common/iconbndl.cpp:208
#, c-format
msgid "Failed to load image %d from stream."
msgstr "%d görseli akıştan yüklenemedi."

#: ../src/common/image.cpp:2587 ../src/common/image.cpp:2606
#, c-format
msgid "Failed to load image from file \"%s\"."
msgstr "\"%s\" dosyasından görsel yüklenemedi."

#: ../src/msw/enhmeta.cpp:97
#, c-format
msgid "Failed to load metafile from file \"%s\"."
msgstr "\"%s\" dosyasından metafile yüklenemedi."

#: ../src/msw/volume.cpp:327
msgid "Failed to load mpr.dll."
msgstr "mpr.dll yüklenemedi."

#: ../src/msw/utils.cpp:953
#, c-format
msgid "Failed to load resource \"%s\"."
msgstr "\"%s\" kaynağı yüklenemedi."

#: ../src/common/dynlib.cpp:92
#, c-format
msgid "Failed to load shared library '%s'"
msgstr "'%s' paylaşılmış kitaplığı yüklenemedi"

#: ../src/osx/core/sound.cpp:145
#, c-format
msgid "Failed to load sound from \"%s\" (error %d)."
msgstr "\"%s\" üzerinden ses yüklenemedi (hata %d)."

#: ../src/msw/utils.cpp:960
#, c-format
msgid "Failed to lock resource \"%s\"."
msgstr "\"%s\" kaynağı kilitlenemedi."

#: ../src/unix/snglinst.cpp:198
#, c-format
msgid "Failed to lock the lock file '%s'"
msgstr "'%s' kilit dosyası kilitlenemedi"

#: ../src/unix/epolldispatcher.cpp:136
#, c-format
msgid "Failed to modify descriptor %d in epoll descriptor %d"
msgstr "%d tanımlayıcısı değiştirilemedi (epoll %d tanımlayıcısındaki)"

#: ../src/common/filename.cpp:2575
#, c-format
msgid "Failed to modify file times for '%s'"
msgstr "'%s' için dosya zamanları değiştirilemedi"

#: ../src/common/selectdispatcher.cpp:258
msgid "Failed to monitor I/O channels"
msgstr "Giriş/Çıkış kanalları izlenemedi"

#: ../src/common/filename.cpp:175
#, c-format
msgid "Failed to open '%s' for reading"
msgstr "'%s' okunmak üzere açılamadı"

#: ../src/common/filename.cpp:180
#, c-format
msgid "Failed to open '%s' for writing"
msgstr "'%s' yazılmak üzere açılamadı"

#: ../src/html/chm.cpp:141
#, c-format
msgid "Failed to open CHM archive '%s'."
msgstr "'%s' CHM arşivi açılamadı."

#: ../src/common/utilscmn.cpp:1126
#, c-format
msgid "Failed to open URL \"%s\" in default browser."
msgstr "'%s' İnternet adresi varsayılan tarayıcıyla açılamadı."

#: ../include/wx/msw/private/fswatcher.h:92
#, c-format
msgid "Failed to open directory \"%s\" for monitoring."
msgstr "\"%s\"klasörü izlenmek üzere açılamadı."

#: ../src/x11/utils.cpp:227
#, c-format
msgid "Failed to open display \"%s\"."
msgstr "\"%s\" görüntüsü açılamadı."

#: ../src/common/filename.cpp:1062
msgid "Failed to open temporary file."
msgstr "Geçici dosya açılamadı."

#: ../src/msw/clipbrd.cpp:91
msgid "Failed to open the clipboard."
msgstr "Pano açılamadı."

#: ../src/common/translation.cpp:1184
#, c-format
msgid "Failed to parse Plural-Forms: '%s'"
msgstr "Çoğul-formlar ayrıştırılamadı: '%s'"

#: ../src/unix/mediactrl.cpp:1214
#, c-format
msgid "Failed to prepare playing \"%s\"."
msgstr "\"%s\" oynatmaya hazırlanamadı."

#: ../src/msw/clipbrd.cpp:600
msgid "Failed to put data on the clipboard"
msgstr "Veri panoya konulamadı"

#: ../src/unix/snglinst.cpp:278
msgid "Failed to read PID from lock file."
msgstr "Kilit dosyasından PID okunamadı."

#: ../src/common/fileconf.cpp:433
msgid "Failed to read config options."
msgstr "Ayarlar okunamadı."

#: ../src/common/docview.cpp:681
#, c-format
msgid "Failed to read document from the file \"%s\"."
msgstr "\"%s\" dosyasından belge okunamadı."

#: ../src/dfb/evtloop.cpp:98
msgid "Failed to read event from DirectFB pipe"
msgstr "DirectFB borusundan olay okunamadı"

#: ../src/unix/wakeuppipe.cpp:120
msgid "Failed to read from wake-up pipe"
msgstr "Uyandırma borusu okunamadı"

#: ../src/unix/utilsunx.cpp:679
msgid "Failed to redirect child process input/output"
msgstr "Alt iş giriş/çıkışı yönlendirilemedi"

#: ../src/msw/utilsexc.cpp:701
msgid "Failed to redirect the child process IO"
msgstr "Alt iş giriş/çıkışı yönlendirilemedi"

#: ../src/msw/dde.cpp:288
#, c-format
msgid "Failed to register DDE server '%s'"
msgstr "'%s' DDE sunucusuna kayıt olunamadı"

#: ../src/common/fontmap.cpp:245
#, c-format
msgid "Failed to remember the encoding for the charset '%s'."
msgstr "'%s' karakter kümesi için kodlama anımsanamadı."

#: ../src/common/debugrpt.cpp:227
#, c-format
msgid "Failed to remove debug report file \"%s\""
msgstr "\"%s\" hata ayıklama rapor dosyası silinemedi"

#: ../src/unix/snglinst.cpp:328
#, c-format
msgid "Failed to remove lock file '%s'"
msgstr "'%s' kilit dosyası silinemedi"

#: ../src/unix/snglinst.cpp:288
#, c-format
msgid "Failed to remove stale lock file '%s'."
msgstr "'%s' eski kilit dosyası silinemedi."

#: ../src/msw/registry.cpp:529
#, c-format
msgid "Failed to rename registry value '%s' to '%s'."
msgstr "'%s' kayıt değeri '%s' olarak yeniden adlandırılamadı."

#: ../src/common/filefn.cpp:1122
#, c-format
msgid ""
"Failed to rename the file '%s' to '%s' because the destination file already "
"exists."
msgstr ""
"'%s' dosyası aynı adlı bir dosya olduğundan '%s' olarak yeniden "
"adlandırılamadı."

#: ../src/msw/registry.cpp:634
#, c-format
msgid "Failed to rename the registry key '%s' to '%s'."
msgstr "'%s' kayıt anahtarı '%s' olarak yeniden adlandırılamadı."

#: ../src/common/filename.cpp:2671
#, c-format
msgid "Failed to retrieve file times for '%s'"
msgstr "'%s' için dosya zamanları alınamadı"

#: ../src/msw/dialup.cpp:468
msgid "Failed to retrieve text of RAS error message"
msgstr "RAS hata iletisi metni alınamadı"

#: ../src/msw/clipbrd.cpp:748
msgid "Failed to retrieve the supported clipboard formats"
msgstr "Desteklenen pano biçimleri alınamadı"

#: ../src/common/docview.cpp:652
#, c-format
msgid "Failed to save document to the file \"%s\"."
msgstr "Belge \"%s\" dosyasına kaydedilemedi."

#: ../src/msw/dib.cpp:269
#, c-format
msgid "Failed to save the bitmap image to file \"%s\"."
msgstr "Bit eşlemi görüntüsü \"%s\" dosyasına kaydedilemedi."

#: ../src/msw/dde.cpp:763
msgid "Failed to send DDE advise notification"
msgstr "DDE danışma uyarısı gönderilemedi"

#: ../src/common/ftp.cpp:402
#, c-format
msgid "Failed to set FTP transfer mode to %s."
msgstr "FTP aktarım kipi %s olarak ayarlanamadı."

#: ../src/msw/clipbrd.cpp:427
msgid "Failed to set clipboard data."
msgstr "Pano verisi ayarlanamadı."

#: ../src/unix/snglinst.cpp:181
#, c-format
msgid "Failed to set permissions on lock file '%s'"
msgstr "'%s' kilit dosyasının izinleri ayarlanamadı"

#: ../src/unix/utilsunx.cpp:668
msgid "Failed to set process priority"
msgstr "İşlem önceliği ayarlanamadı"

#: ../src/common/file.cpp:559
msgid "Failed to set temporary file permissions"
msgstr "Geçici dosya izinleri ayarlanamadı"

#: ../src/gtk/textctrl.cpp:1072
msgid "Failed to set text in the text control."
msgstr "Metin denetime yerleştirilemedi."

#: ../src/unix/threadpsx.cpp:1298
#, c-format
msgid "Failed to set thread concurrency level to %lu"
msgstr "%lu iş parçacığı öncelik düzeyi ayarlanamadı."

#: ../src/unix/threadpsx.cpp:1424
#, c-format
msgid "Failed to set thread priority %d."
msgstr "%d iş parçacığı önceliği ayarlanamadı."

#: ../src/unix/utilsunx.cpp:783
msgid "Failed to set up non-blocking pipe, the program might hang."
msgstr "Engellemesiz boru kurulamadı, program takılabilir."

#: ../src/common/fs_mem.cpp:261
#, c-format
msgid "Failed to store image '%s' to memory VFS!"
msgstr "'%s' görüntüsü VFS belleğine yerleştirilemedi!"

#: ../src/dfb/evtloop.cpp:170
msgid "Failed to switch DirectFB pipe to non-blocking mode"
msgstr "DirectFB borusu engellemesiz kipe döndürülemedi"

#: ../src/unix/wakeuppipe.cpp:59
msgid "Failed to switch wake up pipe to non-blocking mode"
msgstr "Uyandırma borusu engellemesiz kipe döndürülemedi"

#: ../src/unix/threadpsx.cpp:1605
msgid "Failed to terminate a thread."
msgstr "Bir iş parçacığı sonlandırılamadı."

#: ../src/msw/dde.cpp:741
msgid "Failed to terminate the advise loop with DDE server"
msgstr "DDE sunucusuyla danışma döngüsü sonlandırılamadı"

#: ../src/msw/dialup.cpp:938
#, c-format
msgid "Failed to terminate the dialup connection: %s"
msgstr "Çevirmeli bağlantı sonlandırılamadı: %s"

#: ../src/common/filename.cpp:2590
#, c-format
msgid "Failed to touch the file '%s'"
msgstr "'%s' dosyasına dokunulamadı"

#: ../src/unix/snglinst.cpp:334
#, c-format
msgid "Failed to unlock lock file '%s'"
msgstr "'%s' kilit dosyasının kilidi kaldırılamadı"

#: ../src/msw/dde.cpp:309
#, c-format
msgid "Failed to unregister DDE server '%s'"
msgstr "'%s' DDE sunucusundan kayıt iptali yapılamadı"

#: ../src/unix/epolldispatcher.cpp:155
#, c-format
msgid "Failed to unregister descriptor %d from epoll descriptor %d"
msgstr "%d tanımlayıcısı kaldırılamadı (%d epoll tanımlayıcısından)"

#: ../src/common/fileconf.cpp:1006
msgid "Failed to update user configuration file."
msgstr "Kullanıcı ayarları dosyası kaydedilemedi."

#: ../src/common/debugrpt.cpp:733
#, c-format
msgid "Failed to upload the debug report (error code %d)."
msgstr "Hata ayıklama raporu yüklenemedi (hata kodu %d)."

#: ../src/unix/snglinst.cpp:168
#, c-format
msgid "Failed to write to lock file '%s'"
msgstr "'%s' kilit dosyasına yazılamadı"

#. TRANSLATORS: Name of Boolean false value
#: ../src/propgrid/propgrid.cpp:209
msgid "False"
msgstr "Yanlış"

#. TRANSLATORS: Label of font family
#: ../src/propgrid/advprops.cpp:694
msgid "Family"
msgstr "Aile"

#: ../src/common/stockitem.cpp:157
msgid "File"
msgstr "Dosya"

#: ../src/common/docview.cpp:669
#, c-format
msgid "File \"%s\" could not be opened for reading."
msgstr "\"%s\" dosyası okunmak üzere açılamadı."

#: ../src/common/docview.cpp:646
#, c-format
msgid "File \"%s\" could not be opened for writing."
msgstr "\"%s\" dosyası yazılmak üzere açılamadı."

#: ../src/generic/filedlgg.cpp:346 ../src/gtk/filedlg.cpp:57
#, c-format
msgid "File '%s' already exists, do you really want to overwrite it?"
msgstr "'%s' dosyası zaten var, üzerine yazılsın mı?"

#: ../src/common/filefn.cpp:1156
#, c-format
msgid "File '%s' couldn't be removed"
msgstr "'%s' dosyası silinemedi"

#: ../src/common/filefn.cpp:1139
#, c-format
msgid "File '%s' couldn't be renamed '%s'"
msgstr "'%s' dosyası '%s' olarak yeniden adlandırılamadı"

#: ../src/richtext/richtextctrl.cpp:3081 ../src/common/textcmn.cpp:953
msgid "File couldn't be loaded."
msgstr "Dosya yüklenemedi."

#: ../src/msw/filedlg.cpp:393
#, c-format
msgid "File dialog failed with error code %0lx."
msgstr "Dosya diyaloğu %0lx hata koduyla sonlandı."

#: ../src/common/docview.cpp:1789
msgid "File error"
msgstr "Dosya hatası"

#: ../src/generic/dirctrlg.cpp:588 ../src/generic/filectrlg.cpp:770
msgid "File name exists already."
msgstr "Aynı adlı bir dosya zaten var."

#: ../src/motif/filedlg.cpp:220
msgid "Files"
msgstr "Dosyalar"

#: ../src/common/filefn.cpp:1591
#, c-format
msgid "Files (%s)"
msgstr "Dosyalar (%s)"

#: ../src/motif/filedlg.cpp:218
msgid "Filter"
msgstr "Süzgeç"

#: ../src/common/stockitem.cpp:159
msgid "First"
msgstr "İlk"

#: ../src/common/prntbase.cpp:1548
msgid "First page"
msgstr "İlk sayfa"

#: ../src/richtext/richtextsizepage.cpp:521
msgid "Fixed"
msgstr "Sabit"

#: ../src/html/helpwnd.cpp:1206
msgid "Fixed font:"
msgstr "Sabit yazı türü:"

#: ../src/html/helpwnd.cpp:1269
msgid "Fixed size face.<br> <b>bold</b> <i>italic</i> "
msgstr "Sabit boyutlu tür.<br> <b>koyu</b> <i>eğik</i> "

#: ../src/richtext/richtextsizepage.cpp:229
msgid "Floating"
msgstr "Yüzen"

#: ../src/common/stockitem.cpp:160
msgid "Floppy"
msgstr "Esnek"

#: ../src/common/paper.cpp:111
msgid "Folio, 8 1/2 x 13 in"
msgstr "Kitap yaprağı, 8 1/2 x 13 inç"

#: ../src/richtext/richtextformatdlg.cpp:344 ../src/osx/carbon/fontdlg.cpp:287
#: ../src/common/stockitem.cpp:194
msgid "Font"
msgstr "Yazı türü"

#: ../src/richtext/richtextfontpage.cpp:221
msgid "Font &weight:"
msgstr "Yazı &koyuluğu:"

#: ../src/html/helpwnd.cpp:1207
msgid "Font size:"
msgstr "Yazı boyutu"

#: ../src/richtext/richtextfontpage.cpp:208
msgid "Font st&yle:"
msgstr "Yazı &biçemi:"

#: ../src/osx/carbon/fontdlg.cpp:329
msgid "Font:"
msgstr "Yazı türü:"

#: ../src/dfb/fontmgr.cpp:198
#, c-format
msgid "Fonts index file %s disappeared while loading fonts."
msgstr "Yazı türleri yüklenirken %s yazı türü dizin dosyası kayboldu."

#: ../src/unix/utilsunx.cpp:645
msgid "Fork failed"
msgstr "Ayrıştırma başarısız"

#: ../src/common/stockitem.cpp:161
msgid "Forward"
msgstr "İleri"

#: ../src/common/xtixml.cpp:235
msgid "Forward hrefs are not supported"
msgstr "Yönlendirme href biçimi desteklenmiyor"

#: ../src/html/helpwnd.cpp:875
#, c-format
msgid "Found %i matches"
msgstr "%i sonuç bulundu"

#: ../src/generic/prntdlgg.cpp:238
msgid "From:"
msgstr "Kaynak:"

#: ../src/propgrid/advprops.cpp:1604
msgid "Fuchsia"
msgstr "Fuşya"

#: ../src/common/imaggif.cpp:138
msgid "GIF: data stream seems to be truncated."
msgstr "GIF: veri akışı budanmış görünüyor."

#: ../src/common/imaggif.cpp:128
msgid "GIF: error in GIF image format."
msgstr "GIF: GIF görsel biçimi hatası."

#: ../src/common/imaggif.cpp:133
msgid "GIF: not enough memory."
msgstr "GIF: bellek yetersiz."

#: ../src/gtk/window.cpp:4631
msgid ""
"GTK+ installed on this machine is too old to support screen compositing, "
"please install GTK+ 2.12 or later."
msgstr ""
"Yüklü GTK+ çok eski ve ekran karmayı desteklemiyor. Lütfen GTK+ 2.12 ya da "
"üzeri bir sürüm yükleyin."

#: ../src/univ/themes/gtk.cpp:525
msgid "GTK+ theme"
msgstr "GTK+ teması"

#: ../src/common/prntbase.cpp:258
msgid "Generic PostScript"
msgstr "Genel PostScript"

#: ../src/common/paper.cpp:135
msgid "German Legal Fanfold, 8 1/2 x 13 in"
msgstr "Alman Legal Fanfold, 8 1/2 x 13 inç"

#: ../src/common/paper.cpp:134
msgid "German Std Fanfold, 8 1/2 x 12 in"
msgstr "Alman Standart Fanfold, 8 1/2 x 12 inç"

#: ../include/wx/xtiprop.h:184
msgid "GetProperty called w/o valid getter"
msgstr "'GetProperty' işlevi geçerli bir alıcı olmaksızın çağrıldı"

#: ../include/wx/xtiprop.h:262
msgid "GetPropertyCollection called on a generic accessor"
msgstr "'GetPropertyCollection' işlevi genel bir erişici üzerinden çağrıldı"

#: ../include/wx/xtiprop.h:202
msgid "GetPropertyCollection called w/o valid collection getter"
msgstr ""
"'GetPropertyCollection' işlevi geçerli bir koleksiyon alıcısı olmaksızın "
"çağrıldı"

#: ../src/html/helpwnd.cpp:660
msgid "Go back"
msgstr "Geri git"

#: ../src/html/helpwnd.cpp:661
msgid "Go forward"
msgstr "İleri git"

#: ../src/html/helpwnd.cpp:663
msgid "Go one level up in document hierarchy"
msgstr "Belge hiyerarşisinde bir düzey yukarı git"

#: ../src/generic/filedlgg.cpp:208 ../src/generic/dirdlgg.cpp:116
msgid "Go to home directory"
msgstr "Açılış klasörüne git"

#: ../src/generic/filedlgg.cpp:205
msgid "Go to parent directory"
msgstr "Üst klasöre git"

#: ../src/generic/aboutdlgg.cpp:76
msgid "Graphics art by "
msgstr "Grafikleri hazırlayan "

#: ../src/propgrid/advprops.cpp:1599
msgid "Gray"
msgstr "Gri"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:883
msgid "GrayText"
msgstr "GriMetin"

#: ../src/common/fmapbase.cpp:154
msgid "Greek (ISO-8859-7)"
msgstr "Yunanca (ISO-8859-7)"

#: ../src/propgrid/advprops.cpp:1600
msgid "Green"
msgstr "Yeşil"

#: ../src/generic/colrdlgg.cpp:342
msgid "Green:"
msgstr "Yeşil:"

#: ../src/richtext/richtextborderspage.cpp:615
msgid "Groove"
msgstr "Groove"

#: ../src/common/zstream.cpp:158 ../src/common/zstream.cpp:318
msgid "Gzip not supported by this version of zlib"
msgstr "Gzip bu Zlib sürümü tarafından desteklemiyor"

#: ../src/html/helpwnd.cpp:1549
msgid "HTML Help Project (*.hhp)|*.hhp|"
msgstr "HTML Yardım Projesi (*.hhp)|*.hhp|"

#: ../src/html/htmlwin.cpp:681
#, c-format
msgid "HTML anchor %s does not exist."
msgstr "%s HTML çapası bulunamadı."

#: ../src/html/helpwnd.cpp:1547
msgid "HTML files (*.html;*.htm)|*.html;*.htm|"
msgstr "HTML dosyaları (*.html;*.htm)|*.html;*.htm|"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1759
msgid "Hand"
msgstr "El"

#: ../src/common/stockitem.cpp:162
msgid "Harddisk"
msgstr "Sabit disk"

#: ../src/common/fmapbase.cpp:155
msgid "Hebrew (ISO-8859-8)"
msgstr "İbranice (ISO-8859-8)"

#: ../src/html/helpwnd.cpp:1200
msgid "Help Browser Options"
msgstr "Yardım Tarayıcısı Ayarları"

#: ../src/generic/helpext.cpp:454 ../src/generic/helpext.cpp:455
msgid "Help Index"
msgstr "Yardım Dizini"

#: ../src/html/helpwnd.cpp:1531
msgid "Help Printing"
msgstr "Yardım Yazdırma"

#: ../src/html/helpwnd.cpp:801
msgid "Help Topics"
msgstr "Yardım Konuları"

#: ../src/html/helpwnd.cpp:1548
msgid "Help books (*.htb)|*.htb|Help books (*.zip)|*.zip|"
msgstr "Yardım kitapları (*.htb)|*.htb|Yardım kitapları (*.zip)|*.zip|"

#: ../src/generic/helpext.cpp:267
#, c-format
msgid "Help directory \"%s\" not found."
msgstr "\"%s\" yardım klasörü bulunamadı."

#: ../src/generic/helpext.cpp:275
#, c-format
msgid "Help file \"%s\" not found."
msgstr "\"%s\" yardım dosyası bulunamadı."

#: ../src/html/helpctrl.cpp:63
#, c-format
msgid "Help: %s"
msgstr "Yardım: %s"

#: ../src/osx/menu_osx.cpp:577
#, c-format
msgid "Hide %s"
msgstr "%s gizle"

#: ../src/osx/menu_osx.cpp:579
msgid "Hide Others"
msgstr "Diğerlerini Gizle"

#: ../src/generic/infobar.cpp:84
msgid "Hide this notification message."
msgstr "Bu uyarı iletisini gizle."

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:884
msgid "Highlight"
msgstr "Vurgu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:885
msgid "HighlightText"
msgstr "VurguMetni"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/stockitem.cpp:164 ../src/common/accelcmn.cpp:65
msgid "Home"
msgstr "Açılış"

#: ../src/generic/dirctrlg.cpp:524
msgid "Home directory"
msgstr "Açılış klasörü"

#: ../src/richtext/richtextsizepage.cpp:253
#: ../src/richtext/richtextsizepage.cpp:255
msgid "How the object will float relative to the text."
msgstr "Nesnenin metne göre nasıl yüzeceği."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1760
msgid "I-Beam"
msgstr "I-Işını"

#: ../src/common/imagbmp.cpp:1196
msgid "ICO: Error in reading mask DIB."
msgstr "ICO: DIB maskesi okuma sorunu."

#: ../src/common/imagbmp.cpp:1290 ../src/common/imagbmp.cpp:1390
#: ../src/common/imagbmp.cpp:1405 ../src/common/imagbmp.cpp:1416
#: ../src/common/imagbmp.cpp:1430 ../src/common/imagbmp.cpp:1478
#: ../src/common/imagbmp.cpp:1493 ../src/common/imagbmp.cpp:1507
#: ../src/common/imagbmp.cpp:1518
msgid "ICO: Error writing the image file!"
msgstr "ICO: Görsel dosyası yazma sorunu!"

#: ../src/common/imagbmp.cpp:1255
msgid "ICO: Image too tall for an icon."
msgstr "ICO: Görsel simge için çok uzun."

#: ../src/common/imagbmp.cpp:1263
msgid "ICO: Image too wide for an icon."
msgstr "ICO: Görsel simge için çok geniş."

#: ../src/common/imagbmp.cpp:1603
msgid "ICO: Invalid icon index."
msgstr "ICO: Simge dizini geçersiz."

#: ../src/common/imagiff.cpp:758
msgid "IFF: data stream seems to be truncated."
msgstr "IIF: veri akışı budanmış görünüyor."

#: ../src/common/imagiff.cpp:742
msgid "IFF: error in IFF image format."
msgstr "IIF: IFF görsel biçimi hatası."

#: ../src/common/imagiff.cpp:745
msgid "IFF: not enough memory."
msgstr "IIF: yetersiz bellek."

#: ../src/common/imagiff.cpp:748
msgid "IFF: unknown error!!!"
msgstr "IIF: bilinmeyen hata!!!"

#: ../src/common/fmapbase.cpp:197
msgid "ISO-2022-JP"
msgstr "ISO-2022-JP"

#: ../src/html/htmprint.cpp:282
msgid ""
"If possible, try changing the layout parameters to make the printout more "
"narrow."
msgstr ""
"Olabiliyorsa, çıktıyı daraltmak için sayfa ayarlarını değiştirmeyi deneyin."

#: ../src/generic/dbgrptg.cpp:358
msgid ""
"If you have any additional information pertaining to this bug\n"
"report, please enter it here and it will be joined to it:"
msgstr ""
"Bu hata raporuna ekleyeceğiniz bir bilgi varsa,\n"
"lütfen buraya yazın:"

#: ../src/generic/dbgrptg.cpp:324
msgid ""
"If you wish to suppress this debug report completely, please choose the "
"\"Cancel\" button,\n"
"but be warned that it may hinder improving the program, so if\n"
"at all possible please do continue with the report generation.\n"
msgstr ""
"Bu hata raporunu göndermek istemiyorsanız, \"İptal\" düğmesine tıklayın,\n"
"ancak bu rapor, yazılımın geliştirilmesine yardımcı olabilir, \n"
"bu nedenle olanağınız varsa raporu gönderin.\n"

#: ../src/msw/registry.cpp:1405
#, c-format
msgid "Ignoring value \"%s\" of the key \"%s\"."
msgstr "\"%s\" değeri \"%s\" anahtarı için yok sayılıyor."

#: ../src/common/xtistrm.cpp:295
msgid "Illegal Object Class (Non-wxEvtHandler) as Event Source"
msgstr "Olay kaynağı nesne sınıfı geçersiz (Non-wxEvtHandler)"

#: ../src/common/xti.cpp:513
msgid "Illegal Parameter Count for ConstructObject Method"
msgstr "ConstructObject yordamı için parametre sayısı geçersiz"

#: ../src/common/xti.cpp:501
msgid "Illegal Parameter Count for Create Method"
msgstr "Create yordamı için parametre sayısı geçersiz"

#: ../src/generic/dirctrlg.cpp:570 ../src/generic/filectrlg.cpp:756
msgid "Illegal directory name."
msgstr "Klasör adı geçersiz."

#: ../src/generic/filectrlg.cpp:1367
msgid "Illegal file specification."
msgstr "Dosya tanımı geçersiz."

#: ../src/common/image.cpp:2269
msgid "Image and mask have different sizes."
msgstr "Görsel ve maske farklı boyutlarda."

#: ../src/common/image.cpp:2746
#, c-format
msgid "Image file is not of type %d."
msgstr "Görsel dosyası %d türünde değil."

#: ../src/common/image.cpp:2877
#, c-format
msgid "Image is not of type %s."
msgstr "Görsel dosyası %s türünde değil."

#: ../src/msw/textctrl.cpp:488
msgid ""
"Impossible to create a rich edit control, using simple text control instead. "
"Please reinstall riched32.dll"
msgstr ""
"Zengin metin denetimi oluşturulamıyor. Onun yerine basit metin denetimi "
"kullanılacak. Lütfen riched32.dll kitaplığını yeniden yükleyin."

#: ../src/unix/utilsunx.cpp:301
msgid "Impossible to get child process input"
msgstr "Alt iş girdisi alınamıyor"

#: ../src/common/filefn.cpp:1028
#, c-format
msgid "Impossible to get permissions for file '%s'"
msgstr "'%s' dosyasının izinleri okunamıyor"

#: ../src/common/filefn.cpp:1042
#, c-format
msgid "Impossible to overwrite the file '%s'"
msgstr "'%s' dosyasının üzerine yazılamıyor"

#: ../src/common/filefn.cpp:1097
#, c-format
msgid "Impossible to set permissions for the file '%s'"
msgstr "'%s' dosyasının izinleri değiştirilemiyor"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:886
msgid "InactiveBorder"
msgstr "DevredışıKenarlık"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:887
msgid "InactiveCaption"
msgstr "DevredışıBaşlık"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:888
msgid "InactiveCaptionText"
msgstr "DevredışıBaşlıkMetni"

#: ../src/common/gifdecod.cpp:792
#, c-format
msgid "Incorrect GIF frame size (%u, %d) for the frame #%u"
msgstr "GIF kare sayısı yanlış (%u, %d) #%u karesi"

#: ../src/msw/ole/automtn.cpp:635
msgid "Incorrect number of arguments."
msgstr "Argüman sayısı hatalı."

#: ../src/common/stockitem.cpp:165
msgid "Indent"
msgstr "Girinti"

#: ../src/richtext/richtextformatdlg.cpp:349
msgid "Indents && Spacing"
msgstr "Girinti ve Boşluklar"

#: ../src/common/stockitem.cpp:166 ../src/html/helpwnd.cpp:515
msgid "Index"
msgstr "Dizin"

#: ../src/common/fmapbase.cpp:159
msgid "Indian (ISO-8859-12)"
msgstr "Hintçe (ISO-8859-12)"

#: ../src/common/init.cpp:287
msgid "Initialization failed in post init, aborting."
msgstr "Hazırlığın ardından başlatılamadı, vazgeçiliyor."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:54
msgid "Ins"
msgstr "Ins"

#. TRANSLATORS: Name of keyboard key
#: ../src/richtext/richtextsymboldlg.cpp:472 ../src/common/accelcmn.cpp:53
msgid "Insert"
msgstr "Ekle"

#: ../src/richtext/richtextbuffer.cpp:8067
msgid "Insert Field"
msgstr "Alan Ekle"

#: ../src/richtext/richtextbuffer.cpp:7978
#: ../src/richtext/richtextbuffer.cpp:8936
msgid "Insert Image"
msgstr "Görsel Ekle"

#: ../src/richtext/richtextbuffer.cpp:8025
msgid "Insert Object"
msgstr "Nesne Ekle"

#: ../src/richtext/richtextctrl.cpp:1286 ../src/richtext/richtextctrl.cpp:1494
#: ../src/richtext/richtextbuffer.cpp:7822
#: ../src/richtext/richtextbuffer.cpp:7852
#: ../src/richtext/richtextbuffer.cpp:7894
msgid "Insert Text"
msgstr "Metin Ekle"

#: ../src/richtext/richtextindentspage.cpp:295
#: ../src/richtext/richtextindentspage.cpp:297
msgid "Inserts a page break before the paragraph."
msgstr "Paragraftan önce bir sayfa sonu ekler."

#: ../src/richtext/richtextborderspage.cpp:617
msgid "Inset"
msgstr "Gömme"

#: ../src/gtk/app.cpp:425
#, c-format
msgid "Invalid GTK+ command line option, use \"%s --help\""
msgstr "Geçersiz GTK+ komut satırı seçeneği, \"%s --help\" yazarak yardım alın"

#: ../src/common/imagtiff.cpp:311
msgid "Invalid TIFF image index."
msgstr "TIFF görsel dizini geçersiz."

#: ../src/common/appcmn.cpp:273
#, c-format
msgid "Invalid display mode specification '%s'."
msgstr "'%s' görünüm kipi özelliği geçersiz."

#: ../src/x11/app.cpp:127
#, c-format
msgid "Invalid geometry specification '%s'"
msgstr "'%s' geometri özelliği geçersiz."

#: ../src/unix/fswatcher_inotify.cpp:323
#, c-format
msgid "Invalid inotify event for \"%s\""
msgstr "\"%s\" için inotify etkinliği geçersiz."

#: ../src/unix/snglinst.cpp:312
#, c-format
msgid "Invalid lock file '%s'."
msgstr "'%s' kilit dosyası geçersiz."

#: ../src/common/translation.cpp:1125
msgid "Invalid message catalog."
msgstr "İleti kataloğu geçersiz."

#: ../src/common/xtistrm.cpp:405 ../src/common/xtistrm.cpp:420
msgid "Invalid or Null Object ID passed to GetObjectClassInfo"
msgstr "GetObjectClassInfo işlevine geçersiz ya da boş nesne kodu gönderildi"

#: ../src/common/xtistrm.cpp:435
msgid "Invalid or Null Object ID passed to HasObjectClassInfo"
msgstr "HasObjectClassInfo işlevine geçersiz ya da boş nesne kodu gönderildi"

#: ../src/common/regex.cpp:310
#, c-format
msgid "Invalid regular expression '%s': %s"
msgstr "Kurallı ifade geçersiz '%s': %s"

#: ../src/common/config.cpp:226
#, c-format
msgid "Invalid value %ld for a boolean key \"%s\" in config file."
msgstr "Ayar dosyasındaki %ld değeri \"%s\" ikili anahtarı geçersiz."

#: ../src/generic/fontdlgg.cpp:329 ../src/richtext/richtextfontpage.cpp:351
#: ../src/osx/carbon/fontdlg.cpp:361 ../src/common/stockitem.cpp:168
msgid "Italic"
msgstr "Yatık"

#: ../src/common/paper.cpp:130
msgid "Italy Envelope, 110 x 230 mm"
msgstr "İtalyan Zarf, 110 x 230 mm"

#: ../src/common/imagjpeg.cpp:270
msgid "JPEG: Couldn't load - file is probably corrupted."
msgstr "JPEG: Yüklenemedi - dosya bozuk olabilir."

#: ../src/common/imagjpeg.cpp:449
msgid "JPEG: Couldn't save image."
msgstr "JPEG: Görsel kaydedilemedi."

#: ../src/common/paper.cpp:163
msgid "Japanese Double Postcard 200 x 148 mm"
msgstr "Japon Çift Postakartı 200 x 148 mm"

#: ../src/common/paper.cpp:167
msgid "Japanese Envelope Chou #3"
msgstr "Japon Zarf Chou #3"

#: ../src/common/paper.cpp:180
msgid "Japanese Envelope Chou #3 Rotated"
msgstr "Japon Zarf Chou #3 Çevrilmiş"

#: ../src/common/paper.cpp:168
msgid "Japanese Envelope Chou #4"
msgstr "Japon Zarf Chou #4"

#: ../src/common/paper.cpp:181
msgid "Japanese Envelope Chou #4 Rotated"
msgstr "Japon Zarf Chou #4 Çevrilmiş"

#: ../src/common/paper.cpp:165
msgid "Japanese Envelope Kaku #2"
msgstr "Japon Zarf Kaku #2"

#: ../src/common/paper.cpp:178
msgid "Japanese Envelope Kaku #2 Rotated"
msgstr "Japon Zarf Kaku #2 Çevrilmiş"

#: ../src/common/paper.cpp:166
msgid "Japanese Envelope Kaku #3"
msgstr "Japon Zarf Kaku #3"

#: ../src/common/paper.cpp:179
msgid "Japanese Envelope Kaku #3 Rotated"
msgstr "Japon Zarf Kaku #3 Çevrilmiş"

#: ../src/common/paper.cpp:185
msgid "Japanese Envelope You #4"
msgstr "Japon Zarf You #4"

#: ../src/common/paper.cpp:186
msgid "Japanese Envelope You #4 Rotated"
msgstr "Japon Zarf You #4 Çevrilmiş"

#: ../src/common/paper.cpp:138
msgid "Japanese Postcard 100 x 148 mm"
msgstr "Japon Postakartı 100 x 148 mm"

#: ../src/common/paper.cpp:175
msgid "Japanese Postcard Rotated 148 x 100 mm"
msgstr "Japon Postakartı Çevrilmiş 148 x 100 mm"

#: ../src/common/stockitem.cpp:169
msgid "Jump to"
msgstr "Atla"

#: ../src/common/stockitem.cpp:171
msgid "Justified"
msgstr "Hizalanmış"

#: ../src/richtext/richtextindentspage.cpp:155
#: ../src/richtext/richtextindentspage.cpp:157
#: ../src/richtext/richtextliststylepage.cpp:344
#: ../src/richtext/richtextliststylepage.cpp:346
msgid "Justify text left and right."
msgstr "Metin sola ve sağa hizalanır."

#: ../src/common/fmapbase.cpp:163
msgid "KOI8-R"
msgstr "KOI8-R"

#: ../src/common/fmapbase.cpp:164
msgid "KOI8-U"
msgstr "KOI8-U"

#: ../src/common/accelcmn.cpp:265 ../src/common/accelcmn.cpp:347
msgid "KP_"
msgstr "KP_"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "KP_Add"
msgstr "TT_Ekleme"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "KP_Begin"
msgstr "TT_Başlangıç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "KP_Decimal"
msgstr "TT_Ondalık"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "KP_Delete"
msgstr "TT_Del"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "KP_Divide"
msgstr "TT_Bölü"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "KP_Down"
msgstr "TT_Aşağı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:100
msgid "KP_End"
msgstr "TT_End"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "KP_Enter"
msgstr "TT_Enter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "KP_Equal"
msgstr "TT_Eşit"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "KP_Home"
msgstr "TT_Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "KP_Insert"
msgstr "TT_Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "KP_Left"
msgstr "TT_Sol"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "KP_Multiply"
msgstr "TT_Çarpı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:99
msgid "KP_Next"
msgstr "TT_Next"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "KP_PageDown"
msgstr "TT_PageDown"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "KP_PageUp"
msgstr "TT_PageUp"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:98
msgid "KP_Prior"
msgstr "TT_Önceki"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "KP_Right"
msgstr "TT_Sağ"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "KP_Separator"
msgstr "TT_Ayıraç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "KP_Space"
msgstr "TT_Boşluk"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "KP_Subtract"
msgstr "TT_Eksi"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "KP_Tab"
msgstr "TT_Sekme"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "KP_Up"
msgstr "TT_Yukarı"

#: ../src/richtext/richtextindentspage.cpp:270
msgid "L&ine spacing:"
msgstr "&Satır aralığı:"

#: ../src/common/stockitem.cpp:174
msgid "Last"
msgstr "Son"

#: ../src/common/prntbase.cpp:1572
msgid "Last page"
msgstr "Son sayfa"

#: ../src/common/log.cpp:305
#, c-format
msgid "Last repeated message (\"%s\", %u time) wasn't output"
msgid_plural "Last repeated message (\"%s\", %u times) wasn't output"
msgstr[0] "Son yinelenen ileti (\"%s\", %u kez) çıkartılmadı"

#: ../src/common/paper.cpp:103
msgid "Ledger, 17 x 11 in"
msgstr "Ledger, 17 x 11 inç"

#: ../src/richtext/richtextindentspage.cpp:204
#: ../src/richtext/richtextliststylepage.cpp:390
msgid "Left (&first line):"
msgstr "Sol (i&lk satır):"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1761
msgid "Left Button"
msgstr "Sol Düğme"

#: ../src/generic/prntdlgg.cpp:880
msgid "Left margin (mm):"
msgstr "Sol kenar boşluğu (mm):"

#: ../src/richtext/richtextindentspage.cpp:141
#: ../src/richtext/richtextindentspage.cpp:143
#: ../src/richtext/richtextliststylepage.cpp:330
#: ../src/richtext/richtextliststylepage.cpp:332
msgid "Left-align text."
msgstr "Metin sola yaslanır."

#: ../src/common/paper.cpp:144
msgid "Legal Extra 9 1/2 x 15 in"
msgstr "Legal Ek 9 1/2 x 15 inç"

#: ../src/common/paper.cpp:96
msgid "Legal, 8 1/2 x 14 in"
msgstr "Legal, 8 1/2 x 14 inç"

#: ../src/common/paper.cpp:143
msgid "Letter Extra 9 1/2 x 12 in"
msgstr "Letter Ek 9 1/2 x 12 inç"

#: ../src/common/paper.cpp:149
msgid "Letter Extra Transverse 9.275 x 12 in"
msgstr "Letter Ek Enine 9.275 x 12 inç"

#: ../src/common/paper.cpp:152
msgid "Letter Plus 8 1/2 x 12.69 in"
msgstr "Letter Artı 8 1/2 x 12.69 inç"

#: ../src/common/paper.cpp:169
msgid "Letter Rotated 11 x 8 1/2 in"
msgstr "Letter Çevrilmiş 11 x 8 1/2 inç"

#: ../src/common/paper.cpp:101
msgid "Letter Small, 8 1/2 x 11 in"
msgstr "Letter Küçük, 8 1/2 x 11 inç"

#: ../src/common/paper.cpp:147
msgid "Letter Transverse 8 1/2 x 11 in"
msgstr "Letter Enine 8 1/2 x 11 inç"

#: ../src/common/paper.cpp:95
msgid "Letter, 8 1/2 x 11 in"
msgstr "Letter, 8 1/2 x 11 inç"

#: ../src/generic/aboutdlgg.cpp:173
msgid "License"
msgstr "Lisans"

#: ../src/generic/fontdlgg.cpp:332
msgid "Light"
msgstr "Açık"

#: ../src/propgrid/advprops.cpp:1608
msgid "Lime"
msgstr "Limon"

#: ../src/generic/helpext.cpp:294
#, c-format
msgid "Line %lu of map file \"%s\" has invalid syntax, skipped."
msgstr ""
"%lu satırında \"%s\" eşleştirme dosyası içinde sözdizimi hatası var, atlandı."

#: ../src/richtext/richtextliststylepage.cpp:444
msgid "Line spacing:"
msgstr "Satır aralığı:"

#: ../src/html/chm.cpp:838
msgid "Link contained '//', converted to absolute link."
msgstr "Bağlantı '//' içeriyor, mutlak bağlantıya dönüştürüldü."

#: ../src/richtext/richtextformatdlg.cpp:364
msgid "List Style"
msgstr "Liste Biçemi"

#: ../src/richtext/richtextstyles.cpp:1064
msgid "List styles"
msgstr "Liste biçemleri"

#: ../src/richtext/richtextfontpage.cpp:197
#: ../src/richtext/richtextfontpage.cpp:199
msgid "Lists font sizes in points."
msgstr "Yazı türü boyutları punto olarak listelenir."

#: ../src/richtext/richtextfontpage.cpp:190
#: ../src/richtext/richtextfontpage.cpp:192
msgid "Lists the available fonts."
msgstr "Kullanılabilir yazı türleri listelenir."

#: ../src/common/fldlgcmn.cpp:340
#, c-format
msgid "Load %s file"
msgstr "%s dosyasını yükle"

#: ../src/html/htmlwin.cpp:597
msgid "Loading : "
msgstr "Yükleniyor : "

#: ../src/unix/snglinst.cpp:246
#, c-format
msgid "Lock file '%s' has incorrect owner."
msgstr "'%s' kilit dosyasının sahibi hatalı."

#: ../src/unix/snglinst.cpp:251
#, c-format
msgid "Lock file '%s' has incorrect permissions."
msgstr "'%s' kilit dosyasının izinleri doğru değil."

#: ../src/generic/logg.cpp:576
#, c-format
msgid "Log saved to the file '%s'."
msgstr "Günlük '%s' dosyasına kaydedildi."

#: ../src/richtext/richtextliststylepage.cpp:484
#: ../src/richtext/richtextbulletspage.cpp:276
msgid "Lower case letters"
msgstr "Küçük harfler"

#: ../src/richtext/richtextliststylepage.cpp:486
#: ../src/richtext/richtextbulletspage.cpp:278
msgid "Lower case roman numerals"
msgstr "Küçük harf Romen rakamları"

#: ../src/gtk/mdi.cpp:422 ../src/gtk1/mdi.cpp:431
msgid "MDI child"
msgstr "MDI alt"

#: ../src/msw/helpchm.cpp:56
msgid ""
"MS HTML Help functions are unavailable because the MS HTML Help library is "
"not installed on this machine. Please install it."
msgstr ""
"MS HTML Yardım kitaplığı yüklü olmadığından yardım işlevleri kullanılamıyor. "
"Lütfen yükleyin."

#: ../src/univ/themes/win32.cpp:3754
msgid "Ma&ximize"
msgstr "Ekranı &kaplat"

#: ../src/common/fmapbase.cpp:203
msgid "MacArabic"
msgstr "MacArapça"

#: ../src/common/fmapbase.cpp:222
msgid "MacArmenian"
msgstr "MacErmenice"

#: ../src/common/fmapbase.cpp:211
msgid "MacBengali"
msgstr "MacBengalce"

#: ../src/common/fmapbase.cpp:217
msgid "MacBurmese"
msgstr "MacBurmese"

#: ../src/common/fmapbase.cpp:236
msgid "MacCeltic"
msgstr "MacKeltçe"

#: ../src/common/fmapbase.cpp:227
msgid "MacCentralEurRoman"
msgstr "MacOrtaAvrupaRoman"

#: ../src/common/fmapbase.cpp:223
msgid "MacChineseSimp"
msgstr "MacÇinceBasit"

#: ../src/common/fmapbase.cpp:201
msgid "MacChineseTrad"
msgstr "MacÇinceGeleneksel"

#: ../src/common/fmapbase.cpp:233
msgid "MacCroatian"
msgstr "MacHırvatça"

#: ../src/common/fmapbase.cpp:206
msgid "MacCyrillic"
msgstr "MacKiril"

#: ../src/common/fmapbase.cpp:207
msgid "MacDevanagari"
msgstr "MacDevanagari"

#: ../src/common/fmapbase.cpp:231
msgid "MacDingbats"
msgstr "MacDingbats"

#: ../src/common/fmapbase.cpp:226
msgid "MacEthiopic"
msgstr "MacEtyopça"

#: ../src/common/fmapbase.cpp:229
msgid "MacExtArabic"
msgstr "MacExtArapça"

#: ../src/common/fmapbase.cpp:237
msgid "MacGaelic"
msgstr "MacGaliçce"

#: ../src/common/fmapbase.cpp:221
msgid "MacGeorgian"
msgstr "MacAzerice"

#: ../src/common/fmapbase.cpp:205
msgid "MacGreek"
msgstr "MacYunanca"

#: ../src/common/fmapbase.cpp:209
msgid "MacGujarati"
msgstr "MacGujarati"

#: ../src/common/fmapbase.cpp:208
msgid "MacGurmukhi"
msgstr "MacGurmukhi"

#: ../src/common/fmapbase.cpp:204
msgid "MacHebrew"
msgstr "Macİbranice"

#: ../src/common/fmapbase.cpp:234
msgid "MacIcelandic"
msgstr "MacIzlandaca"

#: ../src/common/fmapbase.cpp:200
msgid "MacJapanese"
msgstr "MacJaponca"

#: ../src/common/fmapbase.cpp:214
msgid "MacKannada"
msgstr "MacKanada"

#: ../src/common/fmapbase.cpp:238
msgid "MacKeyboardGlyphs"
msgstr "MacKeyboardGlyphs"

#: ../src/common/fmapbase.cpp:218
msgid "MacKhmer"
msgstr "MacKmerce"

#: ../src/common/fmapbase.cpp:202
msgid "MacKorean"
msgstr "MacKorece"

#: ../src/common/fmapbase.cpp:220
msgid "MacLaotian"
msgstr "MacLaotian"

#: ../src/common/fmapbase.cpp:215
msgid "MacMalayalam"
msgstr "MacMalayca"

#: ../src/common/fmapbase.cpp:225
msgid "MacMongolian"
msgstr "MacMongolca"

#: ../src/common/fmapbase.cpp:210
msgid "MacOriya"
msgstr "MacOriya"

#: ../src/common/fmapbase.cpp:199
msgid "MacRoman"
msgstr "MacRoman"

#: ../src/common/fmapbase.cpp:235
msgid "MacRomanian"
msgstr "MacRomence"

#: ../src/common/fmapbase.cpp:216
msgid "MacSinhalese"
msgstr "MacSinhalese"

#: ../src/common/fmapbase.cpp:230
msgid "MacSymbol"
msgstr "MacSimge"

#: ../src/common/fmapbase.cpp:212
msgid "MacTamil"
msgstr "MacTamil"

#: ../src/common/fmapbase.cpp:213
msgid "MacTelugu"
msgstr "MacTelugu"

#: ../src/common/fmapbase.cpp:219
msgid "MacThai"
msgstr "MacTay"

#: ../src/common/fmapbase.cpp:224
msgid "MacTibetan"
msgstr "MacTibetçe"

#: ../src/common/fmapbase.cpp:232
msgid "MacTurkish"
msgstr "MacTürkçe"

#: ../src/common/fmapbase.cpp:228
msgid "MacVietnamese"
msgstr "MacVietnamca"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1762
msgid "Magnifier"
msgstr "Büyüteç"

#: ../src/propgrid/advprops.cpp:2143
msgid "Make a selection:"
msgstr "Bir seçim yapın:"

#: ../src/richtext/richtextformatdlg.cpp:374
#: ../src/richtext/richtextmarginspage.cpp:171
msgid "Margins"
msgstr "Kenar Boşlukları"

#: ../src/propgrid/advprops.cpp:1595
msgid "Maroon"
msgstr "Kestane"

#: ../src/generic/fdrepdlg.cpp:147
msgid "Match case"
msgstr "Küçük büyük harf eşleştirilsin"

#: ../src/richtext/richtextsizepage.cpp:463
msgid "Max height:"
msgstr "En fazla yükseklik:"

#: ../src/richtext/richtextsizepage.cpp:436
msgid "Max width:"
msgstr "En fazla genişlik:"

#: ../src/unix/mediactrl.cpp:947
#, c-format
msgid "Media playback error: %s"
msgstr "Ortam oynatma hatası: %s"

#: ../src/common/fs_mem.cpp:175
#, c-format
msgid "Memory VFS already contains file '%s'!"
msgstr "'%s' dosyası zaten VFS belleğinde yer alıyor!"

#. TRANSLATORS: Name of keyboard key
#. TRANSLATORS: Keyword of system colour
#: ../src/common/accelcmn.cpp:73 ../src/propgrid/advprops.cpp:889
msgid "Menu"
msgstr "Menü"

#: ../src/common/msgout.cpp:124
msgid "Message"
msgstr "İleti"

#: ../src/univ/themes/metal.cpp:168
msgid "Metal theme"
msgstr "Metal tema"

#: ../src/msw/ole/automtn.cpp:652
msgid "Method or property not found."
msgstr "Yordam ya da özellik bulunamadı."

#: ../src/univ/themes/win32.cpp:3752
msgid "Mi&nimize"
msgstr "Simge &durumuna küçült"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1763
msgid "Middle Button"
msgstr "Orta Düğme"

#: ../src/richtext/richtextsizepage.cpp:409
msgid "Min height:"
msgstr "En az yükseklik:"

#: ../src/richtext/richtextsizepage.cpp:382
msgid "Min width:"
msgstr "En az genişlik:"

#: ../src/msw/ole/automtn.cpp:668
msgid "Missing a required parameter."
msgstr "Gereken bir parametre eksik."

#: ../src/generic/fontdlgg.cpp:324
msgid "Modern"
msgstr "Modern"

#: ../src/generic/filectrlg.cpp:427
msgid "Modified"
msgstr "Değişiklik"

#: ../src/common/module.cpp:133
#, c-format
msgid "Module \"%s\" initialization failed"
msgstr "\"%s\" modülü başlatılamadı"

#: ../src/common/paper.cpp:131
msgid "Monarch Envelope, 3 7/8 x 7 1/2 in"
msgstr "Monarşi Zarf, 3 7/8 x 7 1/2 inç"

#: ../src/msw/fswatcher.cpp:143
msgid "Monitoring individual files for changes is not supported currently."
msgstr "Tek tek dosyaların değişiminin izlenmesi şu anda desteklenmiyor."

#: ../src/generic/editlbox.cpp:172
msgid "Move down"
msgstr "Aşağı taşı"

#: ../src/generic/editlbox.cpp:171
msgid "Move up"
msgstr "Yukarı taşı"

#: ../src/richtext/richtextsizepage.cpp:682
#: ../src/richtext/richtextsizepage.cpp:684
msgid "Moves the object to the next paragraph."
msgstr "Nesneyi sonraki paragrafa taşır."

#: ../src/richtext/richtextsizepage.cpp:676
#: ../src/richtext/richtextsizepage.cpp:678
msgid "Moves the object to the previous paragraph."
msgstr "Nesneyi önceki paragrafa taşır."

#: ../src/richtext/richtextbuffer.cpp:9966
msgid "Multiple Cell Properties"
msgstr "Çoklu Hücre Özellikleri"

#: ../src/propgrid/advprops.cpp:1596
msgid "Navy"
msgstr "Lacivert"

#: ../src/common/stockitem.cpp:175
msgid "Network"
msgstr "Ağ"

#: ../src/common/stockitem.cpp:176
msgid "New"
msgstr "Yeni"

#: ../src/richtext/richtextstyledlg.cpp:243
msgid "New &Box Style..."
msgstr "Yeni &Kutu Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:225
msgid "New &Character Style..."
msgstr "Yeni &Karakter Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:237
msgid "New &List Style..."
msgstr "Yeni &Liste Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:231
msgid "New &Paragraph Style..."
msgstr "Yeni &Paragraf Biçemi..."

#: ../src/richtext/richtextstyledlg.cpp:606
#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:654
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:820
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:893
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:934
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "New Style"
msgstr "Yeni Biçem"

#: ../src/generic/editlbox.cpp:169
msgid "New item"
msgstr "Yeni öge"

#: ../src/generic/dirdlgg.cpp:297 ../src/generic/dirdlgg.cpp:307
#: ../src/generic/filectrlg.cpp:618 ../src/generic/filectrlg.cpp:627
msgid "NewName"
msgstr "YeniAd"

#: ../src/common/prntbase.cpp:1567 ../src/html/helpwnd.cpp:665
msgid "Next page"
msgstr "Sonraki sayfa"

#: ../include/wx/msgdlg.h:277 ../src/common/stockitem.cpp:177
#: ../src/motif/msgdlg.cpp:196
msgid "No"
msgstr "Hayır"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1764
msgid "No Entry"
msgstr "Kayıt Yok"

#: ../src/generic/animateg.cpp:150
#, c-format
msgid "No animation handler for type %ld defined."
msgstr "%ld türü için canlandırma işleyicisi tanımlanmamış."

#: ../src/dfb/bitmap.cpp:642 ../src/dfb/bitmap.cpp:676
#, c-format
msgid "No bitmap handler for type %d defined."
msgstr "%d türü için bit eşlemi işleyicisi tanımlanmamış."

#: ../src/common/utilscmn.cpp:1077
msgid "No default application configured for HTML files."
msgstr "HTML dosyaları için varsayılan uygulama ayarlanmamış."

#: ../src/generic/helpext.cpp:445
msgid "No entries found."
msgstr "Hiç bir kayıt bulunamadı."

#: ../src/common/fontmap.cpp:421
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found,\n"
"but an alternative encoding '%s' is available.\n"
"Do you want to use this encoding (otherwise you will have to choose another "
"one)?"
msgstr ""
"Metni '%s' kodlamasıyla görüntüleyecek bir yazı türü yok,\n"
"ancak onun yerine '%s' kodlama seçeneği kullanılabilir.\n"
"Bu kodlamayı kullanmak istiyor musunuz (aksi halde başka bir tane "
"seçmelisiniz) ?"

#: ../src/common/fontmap.cpp:426
#, c-format
msgid ""
"No font for displaying text in encoding '%s' found.\n"
"Would you like to select a font to be used for this encoding\n"
"(otherwise the text in this encoding will not be shown correctly)?"
msgstr ""
"Metni '%s' kodlamasıyla görüntüleyecek bir yazı türü yok.\n"
"Bu kodlamayı kullanabileceğiniz bir yazı türü seçmek istiyor musunuz\n"
"(aksi halde bu kodlamadaki metin doğru olarak görüntülenmez) ?"

#: ../src/generic/animateg.cpp:142
msgid "No handler found for animation type."
msgstr "Canlandırma türünün işleyicisi bulunamadı."

#: ../src/common/image.cpp:2728
msgid "No handler found for image type."
msgstr "Görüntü türünün işleyicisi bulunamadı."

#: ../src/common/image.cpp:2736 ../src/common/image.cpp:2848
#: ../src/common/image.cpp:2901
#, c-format
msgid "No image handler for type %d defined."
msgstr "%d türünün görüntü işleyicisi tanımlanmamış."

#: ../src/common/image.cpp:2871 ../src/common/image.cpp:2915
#, c-format
msgid "No image handler for type %s defined."
msgstr "%s türünün görüntü işleyicisi tanımlanmamış."

#: ../src/html/helpwnd.cpp:858
msgid "No matching page found yet"
msgstr "Henüz uyan bir sayfa bulunamadı"

#: ../src/unix/sound.cpp:81
msgid "No sound"
msgstr "Ses yok"

#: ../src/common/image.cpp:2277 ../src/common/image.cpp:2318
msgid "No unused colour in image being masked."
msgstr "Maskelenen görselde kullanılmamış renk yok."

#: ../src/common/image.cpp:3374
msgid "No unused colour in image."
msgstr "Görselde kullanılmamış renk yok."

#: ../src/generic/helpext.cpp:302
#, c-format
msgid "No valid mappings found in the file \"%s\"."
msgstr "\"%s\" dosyasında geçerli eşleme bulunamadı."

#: ../src/common/fmapbase.cpp:157
msgid "Nordic (ISO-8859-10)"
msgstr "Norveçce (ISO-8859-10)"

#: ../src/html/helpwnd.cpp:1263
msgid "Normal face<br>and <u>underlined</u>. "
msgstr "Normal yazı türü <br>ve <u>altı çizili</u>. "

#: ../src/html/helpwnd.cpp:1205
msgid "Normal font:"
msgstr "Normal yazı türü:"

#: ../src/propgrid/props.cpp:1128
#, c-format
msgid "Not %s"
msgstr "%s değil"

#: ../include/wx/filename.h:573 ../include/wx/filename.h:578
msgid "Not available"
msgstr "Kullanılamıyor"

#: ../src/richtext/richtextfontpage.cpp:358
msgid "Not underlined"
msgstr "Altı çizili değil"

#: ../src/common/paper.cpp:115
msgid "Note, 8 1/2 x 11 in"
msgstr "Not, 8 1/2 x 11 inç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:105
msgid "Num *"
msgstr "Num *"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:106
msgid "Num +"
msgstr "Num +"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:107
msgid "Num ,"
msgstr "Num ,"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:108
msgid "Num -"
msgstr "Num -"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:109
msgid "Num ."
msgstr "Num ."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:110
msgid "Num /"
msgstr "Num /"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:104
msgid "Num ="
msgstr "Num ="

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:101
msgid "Num Begin"
msgstr "Num Başlangıç"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:103
msgid "Num Delete"
msgstr "Num Delete"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:95
msgid "Num Down"
msgstr "Num Aşağı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:100
msgid "Num End"
msgstr "Num Son"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:90
msgid "Num Enter"
msgstr "Num Enter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:91
msgid "Num Home"
msgstr "Num Home"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:102
msgid "Num Insert"
msgstr "Num Insert"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:86
msgid "Num Lock"
msgstr "Num Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:97
msgid "Num Page Down"
msgstr "Num Page Down"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:96
msgid "Num Page Up"
msgstr "Num Page Up"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:94
msgid "Num Right"
msgstr "Num Sağ"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:88
msgid "Num Space"
msgstr "Num Boşluk"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:89
msgid "Num Tab"
msgstr "Num Sekme"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:93
msgid "Num Up"
msgstr "Num Yukarı"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:92
msgid "Num left"
msgstr "Num sol"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:86
msgid "Num_lock"
msgstr "Num_lock"

#: ../src/richtext/richtextliststylepage.cpp:487
#: ../src/richtext/richtextbulletspage.cpp:279
msgid "Numbered outline"
msgstr "Numaralı taslak"

#: ../include/wx/msgdlg.h:278 ../src/richtext/richtextstyledlg.cpp:297
#: ../src/common/stockitem.cpp:178 ../src/msw/msgdlg.cpp:454
#: ../src/msw/msgdlg.cpp:747 ../src/gtk1/fontdlg.cpp:138
msgid "OK"
msgstr "Tamam"

#: ../src/msw/ole/automtn.cpp:692
#, c-format
msgid "OLE Automation error in %s: %s"
msgstr "%s içinde OLE otomasyon hatası: %s"

#: ../include/wx/richtext/richtextimagedlg.h:37
msgid "Object Properties"
msgstr "Nesne Özellikleri"

#: ../src/msw/ole/automtn.cpp:660
msgid "Object implementation does not support named arguments."
msgstr "Nesne uygulaması adlandırılmış argümanları desteklemiyor."

#: ../src/common/xtixml.cpp:264
msgid "Objects must have an id attribute"
msgstr "Nesnelerin bir kod özniteliği olmalıdır"

#: ../src/propgrid/advprops.cpp:1601
msgid "Olive"
msgstr "Zeytin"

#: ../src/richtext/richtextbackgroundpage.cpp:325
msgid "Opaci&ty:"
msgstr "&Matlık:"

#: ../src/generic/colrdlgg.cpp:354
msgid "Opacity:"
msgstr "Matlık:"

#: ../src/common/docview.cpp:1773 ../src/common/docview.cpp:1815
msgid "Open File"
msgstr "Dosya Aç"

#: ../src/html/helpwnd.cpp:671 ../src/html/helpwnd.cpp:1554
msgid "Open HTML document"
msgstr "HTML belgesi aç"

#: ../src/generic/dbgrptg.cpp:163
#, c-format
msgid "Open file \"%s\""
msgstr "Dosya aç \"%s\""

#: ../src/common/stockitem.cpp:179
msgid "Open..."
msgstr "Aç..."

#: ../src/unix/glx11.cpp:506 ../src/msw/glcanvas.cpp:592
msgid "OpenGL 3.0 or later is not supported by the OpenGL driver."
msgstr ""
"OpenGL 3.0 ve üzerindeki sürümler OpenGL sürücüsü tarafından desteklenmiyor."

#: ../src/generic/dirctrlg.cpp:599 ../src/generic/dirdlgg.cpp:323
#: ../src/generic/filectrlg.cpp:642 ../src/generic/filectrlg.cpp:786
msgid "Operation not permitted."
msgstr "İşleme izin verilmiyor."

#: ../src/common/cmdline.cpp:900
#, c-format
msgid "Option '%s' can't be negated"
msgstr "'%s' seçeneği yok sayılamaz"

#: ../src/common/cmdline.cpp:1064
#, c-format
msgid "Option '%s' requires a value."
msgstr "'%s' seçeneğinin bir değeri olması gerekiyor."

#: ../src/common/cmdline.cpp:1147
#, c-format
msgid "Option '%s': '%s' cannot be converted to a date."
msgstr "'%s' seçeneği: '%s' tarihe dönüştürülemiyor."

#: ../src/propgrid/advprops.cpp:1606
msgid "Orange"
msgstr "Turuncu"

#: ../src/generic/prntdlgg.cpp:615 ../src/generic/prntdlgg.cpp:869
msgid "Orientation"
msgstr "Yön"

#: ../src/common/windowid.cpp:242
msgid "Out of window IDs.  Recommend shutting down application."
msgstr "Pencere kodları tükendi. Uygulamayı kapatmanız önerilir."

#: ../src/richtext/richtextborderspage.cpp:398
#: ../src/richtext/richtextborderspage.cpp:556
msgid "Outline"
msgstr "Taslak"

#: ../src/richtext/richtextborderspage.cpp:618
msgid "Outset"
msgstr "Kabartma"

#: ../src/msw/ole/automtn.cpp:656
msgid "Overflow while coercing argument values."
msgstr "Arguman değerleri zorlanırken taşma oldu."

#: ../src/common/imagpcx.cpp:457 ../src/common/imagpcx.cpp:480
msgid "PCX: couldn't allocate memory"
msgstr "PCX: bellek ayrılamadı"

#: ../src/common/imagpcx.cpp:456
msgid "PCX: image format unsupported"
msgstr "PCX: görsel biçimi desteklenmiyor"

#: ../src/common/imagpcx.cpp:479
msgid "PCX: invalid image"
msgstr "PCX: görsel geçersiz"

#: ../src/common/imagpcx.cpp:442
msgid "PCX: this is not a PCX file."
msgstr "PCX: bu bir PCX dosyası değil."

#: ../src/common/imagpcx.cpp:459 ../src/common/imagpcx.cpp:481
msgid "PCX: unknown error !!!"
msgstr "PCX: bilinmeyen hata !!!"

#: ../src/common/imagpcx.cpp:458
msgid "PCX: version number too low"
msgstr "PCX: sürüm numarası çok küçük"

#: ../src/common/imagpnm.cpp:91
msgid "PNM: Couldn't allocate memory."
msgstr "PNM: Bellek ayrılamadı."

#: ../src/common/imagpnm.cpp:73
msgid "PNM: File format is not recognized."
msgstr "PNM: Dosya biçimi tanınamadı."

#: ../src/common/imagpnm.cpp:112 ../src/common/imagpnm.cpp:134
#: ../src/common/imagpnm.cpp:156
msgid "PNM: File seems truncated."
msgstr "PNM: Dosya budanmış görünüyor."

#: ../src/common/paper.cpp:187
msgid "PRC 16K 146 x 215 mm"
msgstr "PRC 16K 146 x 215 mm"

#: ../src/common/paper.cpp:200
msgid "PRC 16K Rotated"
msgstr "PRC 16K Çevrilmiş"

#: ../src/common/paper.cpp:188
msgid "PRC 32K 97 x 151 mm"
msgstr "PRC 32K 97 x 151 mm"

#: ../src/common/paper.cpp:201
msgid "PRC 32K Rotated"
msgstr "PRC 32K Çevrilmiş"

#: ../src/common/paper.cpp:189
msgid "PRC 32K(Big) 97 x 151 mm"
msgstr "PRC 32K(Büyük) 97 x 151 mm"

#: ../src/common/paper.cpp:202
msgid "PRC 32K(Big) Rotated"
msgstr "PRC 32K(Büyük) Çevrilmiş"

#: ../src/common/paper.cpp:190
msgid "PRC Envelope #1 102 x 165 mm"
msgstr "PRC Zarf #1 102 x 165 mm"

#: ../src/common/paper.cpp:203
msgid "PRC Envelope #1 Rotated 165 x 102 mm"
msgstr "PRC Zarf #1 Çevrilmiş 165 x 102 mm"

#: ../src/common/paper.cpp:199
msgid "PRC Envelope #10 324 x 458 mm"
msgstr "PRC Zarf #10 324 x 458 mm"

#: ../src/common/paper.cpp:212
msgid "PRC Envelope #10 Rotated 458 x 324 mm"
msgstr "PRC Zarf #10 Çevrilmiş 458 x 324 mm"

#: ../src/common/paper.cpp:191
msgid "PRC Envelope #2 102 x 176 mm"
msgstr "PRC Zarf #2 102 x 176 mm"

#: ../src/common/paper.cpp:204
msgid "PRC Envelope #2 Rotated 176 x 102 mm"
msgstr "PRC Zarf #2 Çevrilmiş 176 x 102 mm"

#: ../src/common/paper.cpp:192
msgid "PRC Envelope #3 125 x 176 mm"
msgstr "PRC Zarf #3 125 x 176 mm"

#: ../src/common/paper.cpp:205
msgid "PRC Envelope #3 Rotated 176 x 125 mm"
msgstr "PRC Zarf #3 Çevrilmiş 176 x 125 mm"

#: ../src/common/paper.cpp:193
msgid "PRC Envelope #4 110 x 208 mm"
msgstr "PRC Zarf #4 110 x 208 mm"

#: ../src/common/paper.cpp:206
msgid "PRC Envelope #4 Rotated 208 x 110 mm"
msgstr "PRC Zarf #4 Çevrilmiş 208 x 110 mm"

#: ../src/common/paper.cpp:194
msgid "PRC Envelope #5 110 x 220 mm"
msgstr "PRC Zarf #5 110 x 220 mm"

#: ../src/common/paper.cpp:207
msgid "PRC Envelope #5 Rotated 220 x 110 mm"
msgstr "PRC Zarf #5 Çevrilmiş 220 x 110 mm"

#: ../src/common/paper.cpp:195
msgid "PRC Envelope #6 120 x 230 mm"
msgstr "PRC Zarf #6 120 x 230 mm"

#: ../src/common/paper.cpp:208
msgid "PRC Envelope #6 Rotated 230 x 120 mm"
msgstr "PRC Zarf #6 Çevrilmiş 230 x 120 mm"

#: ../src/common/paper.cpp:196
msgid "PRC Envelope #7 160 x 230 mm"
msgstr "PRC Zarf #7 160 x 230 mm"

#: ../src/common/paper.cpp:209
msgid "PRC Envelope #7 Rotated 230 x 160 mm"
msgstr "PRC Zarf #7 Çevrilmiş 230 x 160 mm"

#: ../src/common/paper.cpp:197
msgid "PRC Envelope #8 120 x 309 mm"
msgstr "PRC Zarf #8 120 x 309 mm"

#: ../src/common/paper.cpp:210
msgid "PRC Envelope #8 Rotated 309 x 120 mm"
msgstr "PRC Zarf #8 Çevrilmiş 309 x 120 mm"

#: ../src/common/paper.cpp:198
msgid "PRC Envelope #9 229 x 324 mm"
msgstr "PRC Zarf #9 229 x 324 mm"

#: ../src/common/paper.cpp:211
msgid "PRC Envelope #9 Rotated 324 x 229 mm"
msgstr "PRC Zarf #9 Çevrilmiş 324 x 229 mm"

#: ../src/richtext/richtextmarginspage.cpp:285
msgid "Padding"
msgstr "Yastıklama"

#: ../src/common/prntbase.cpp:2074
#, c-format
msgid "Page %d"
msgstr "Sayfa %d"

#: ../src/common/prntbase.cpp:2072
#, c-format
msgid "Page %d of %d"
msgstr "Sayfa %d / %d"

#: ../src/gtk/print.cpp:826
msgid "Page Setup"
msgstr "Sayfa Düzeni"

#: ../src/generic/prntdlgg.cpp:828 ../src/common/prntbase.cpp:484
msgid "Page setup"
msgstr "Sayfa düzeni"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:58
msgid "PageDown"
msgstr "PageDown"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:57
msgid "PageUp"
msgstr "PageUp"

#: ../src/generic/prntdlgg.cpp:216
msgid "Pages"
msgstr "Sayfalar"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1765
msgid "Paint Brush"
msgstr "Boya Fırçası"

#: ../src/generic/prntdlgg.cpp:602 ../src/generic/prntdlgg.cpp:801
#: ../src/generic/prntdlgg.cpp:842 ../src/generic/prntdlgg.cpp:855
#: ../src/generic/prntdlgg.cpp:1052 ../src/generic/prntdlgg.cpp:1057
msgid "Paper size"
msgstr "Kağıt boyutu"

#: ../src/richtext/richtextstyles.cpp:1062
msgid "Paragraph styles"
msgstr "Paragraf biçemleri"

#: ../src/common/xtistrm.cpp:465
msgid "Passing a already registered object to SetObject"
msgstr "SetObject işlevine zaten kayıtlı olan bir nesne gönderildi"

#: ../src/common/xtistrm.cpp:476
msgid "Passing an unknown object to GetObject"
msgstr "GetObject işlevine bilinmeyen bir nesne gönderildi"

#: ../src/common/stockitem.cpp:262
msgid "Paste selection"
msgstr "Seçimi yapıştır"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1766
msgid "Pencil"
msgstr "Kalem"

#: ../src/richtext/richtextliststylepage.cpp:222
#: ../src/richtext/richtextbulletspage.cpp:159
msgid "Peri&od"
msgstr "N&okta"

#: ../src/generic/filectrlg.cpp:430
msgid "Permissions"
msgstr "İzinler"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:60
msgid "PgDn"
msgstr "PgDn"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:59
msgid "PgUp"
msgstr "PgUp"

#: ../src/richtext/richtextbuffer.cpp:12868
msgid "Picture Properties"
msgstr "Görsel Özellikleri"

#: ../include/wx/unix/pipe.h:47
msgid "Pipe creation failed"
msgstr "Boru oluşturulamadı"

#: ../src/gtk1/fontdlg.cpp:74
msgid "Please choose a valid font."
msgstr "Lütfen geçerli bir yazı türü seçin."

#: ../src/generic/filedlgg.cpp:357 ../src/gtk/filedlg.cpp:73
msgid "Please choose an existing file."
msgstr "Lütfen varolan bir dosya seçin."

#: ../src/html/helpwnd.cpp:800
msgid "Please choose the page to display:"
msgstr "Lütfen görüntülenecek sayfayı seçin:"

#: ../src/msw/dialup.cpp:764
msgid "Please choose which ISP do you want to connect to"
msgstr "Lütfen bağlanmak istediğiniz hizmet sağlayıcıyı seçin"

#: ../src/common/headerctrlcmn.cpp:59
msgid "Please select the columns to show and define their order:"
msgstr "Lütfen görüntülenecek sütunları seçin ve sıralarını belirleyin:"

#: ../src/common/prntbase.cpp:538
msgid "Please wait while printing..."
msgstr "Yazdırılıyor, lütfen bekleyin..."

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1767
msgid "Point Left"
msgstr "Sola Ok"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1768
msgid "Point Right"
msgstr "Sağa Ok"

#. TRANSLATORS: Label of font point size
#: ../src/propgrid/advprops.cpp:662
msgid "Point Size"
msgstr "Punto Boyutu"

#: ../src/generic/prntdlgg.cpp:298
msgid "PostScript file"
msgstr "PostScript dosyası"

#: ../src/osx/menu_osx.cpp:568
msgid "Preferences..."
msgstr "Ayarlar..."

#: ../src/common/prntbase.cpp:546
msgid "Preparing"
msgstr "Hazırlanıyor"

#: ../src/generic/fontdlgg.cpp:455 ../src/osx/carbon/fontdlg.cpp:390
#: ../src/html/helpwnd.cpp:1222
msgid "Preview:"
msgstr "Önizleme:"

#: ../src/common/prntbase.cpp:1553 ../src/html/helpwnd.cpp:664
msgid "Previous page"
msgstr "Önceki sayfa"

#: ../include/wx/prntbase.h:399 ../src/common/docview.cpp:1268
msgid "Print Preview"
msgstr "Baskı Önizlemesi"

#: ../src/common/prntbase.cpp:2015 ../src/common/prntbase.cpp:2057
#: ../src/common/prntbase.cpp:2065
msgid "Print Preview Failure"
msgstr "Baskı Önizleme Sorunu"

#: ../src/generic/prntdlgg.cpp:224
msgid "Print Range"
msgstr "Yazdırma Aralığı"

#: ../src/generic/prntdlgg.cpp:449
msgid "Print Setup"
msgstr "Yazdırma Ayarları"

#: ../src/generic/prntdlgg.cpp:621
msgid "Print in colour"
msgstr "Renkli yazdır"

#: ../src/common/stockitem.cpp:182
msgid "Print previe&w..."
msgstr "Baskı ö&nizleme..."

#: ../src/common/docview.cpp:1262
msgid "Print preview creation failed."
msgstr "Baskı önizleme oluşturulamadı."

#: ../src/common/stockitem.cpp:182
msgid "Print preview..."
msgstr "Baskı önizleme..."

#: ../src/generic/prntdlgg.cpp:630
msgid "Print spooling"
msgstr "Yazdırma kuyruğu"

#: ../src/html/helpwnd.cpp:675
msgid "Print this page"
msgstr "Bu sayfayı yazdır"

#: ../src/generic/prntdlgg.cpp:185
msgid "Print to File"
msgstr "Dosyaya Yazdır"

#: ../src/common/stockitem.cpp:183
msgid "Print..."
msgstr "Yazdır..."

#: ../src/generic/prntdlgg.cpp:633
msgid "Printer command:"
msgstr "Yazıcı komutu:"

#: ../src/generic/prntdlgg.cpp:180
msgid "Printer options"
msgstr "Yazıcı ayarları"

#: ../src/generic/prntdlgg.cpp:645
msgid "Printer options:"
msgstr "Yazıcı ayarları:"

#: ../src/generic/prntdlgg.cpp:916
msgid "Printer..."
msgstr "Yazıcı..."

#: ../include/wx/richtext/richtextprint.h:163 ../src/common/prntbase.cpp:535
#: ../src/html/htmprint.cpp:277
msgid "Printing"
msgstr "Yazdırılıyor"

#: ../src/common/prntbase.cpp:612
msgid "Printing "
msgstr "Yazdırılıyor "

#: ../src/common/prntbase.cpp:347
msgid "Printing Error"
msgstr "Yazdırma Hatası"

#: ../src/common/prntbase.cpp:565
#, c-format
msgid "Printing page %d"
msgstr "Yazdırılan sayfa %d"

#: ../src/common/prntbase.cpp:570
#, c-format
msgid "Printing page %d of %d"
msgstr "Yazdırılan sayfa %d / %d"

#: ../src/generic/printps.cpp:201
#, c-format
msgid "Printing page %d..."
msgstr "Yazdırılan sayfa %d..."

#: ../src/generic/printps.cpp:161
msgid "Printing..."
msgstr "Yazdırılıyor..."

#: ../include/wx/richtext/richtextprint.h:109 ../include/wx/prntbase.h:267
#: ../src/common/docview.cpp:2132
msgid "Printout"
msgstr "Çıktı"

#: ../src/common/debugrpt.cpp:560
#, c-format
msgid ""
"Processing debug report has failed, leaving the files in \"%s\" directory."
msgstr ""
"Hata ayıklama raporu oluşturulamadı, dosyalar \"%s\" klasöründe bırakıldı."

#: ../src/common/stockitem.cpp:184
msgid "Properties"
msgstr "Özellikler"

#: ../src/propgrid/manager.cpp:237
msgid "Property"
msgstr "Özellik"

#. TRANSLATORS: Caption of message box displaying any property error
#: ../src/propgrid/propgrid.cpp:3185 ../src/propgrid/propgrid.cpp:3318
msgid "Property Error"
msgstr "Özellik Hatası"

#: ../src/propgrid/advprops.cpp:1597
msgid "Purple"
msgstr "Mor"

#: ../src/common/paper.cpp:112
msgid "Quarto, 215 x 275 mm"
msgstr "Quarto, 215 x 275 mm"

#: ../src/generic/logg.cpp:1016
msgid "Question"
msgstr "Soru"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1769
msgid "Question Arrow"
msgstr "Soru Oku"

#: ../src/common/stockitem.cpp:156
msgid "Quit"
msgstr "Çıkış"

#: ../src/common/stockitem.cpp:263
msgid "Quit this program"
msgstr "Bu uygulamayı kapat"

#: ../src/common/accelcmn.cpp:338
msgid "RawCtrl+"
msgstr "HamCtrl+"

#: ../src/common/ffile.cpp:109 ../src/common/ffile.cpp:133
#, c-format
msgid "Read error on file '%s'"
msgstr "'%s' dosyasında okuma sorunu"

#: ../src/common/secretstore.cpp:199
#, c-format
msgid "Reading password for \"%s/%s\" failed: %s."
msgstr "\"%s/%s\" için parola okunamadı: %s."

#: ../src/propgrid/advprops.cpp:1605
msgid "Red"
msgstr "Kırmızı"

#: ../src/generic/colrdlgg.cpp:339
msgid "Red:"
msgstr "Kırmızı:"

#: ../src/common/stockitem.cpp:264
msgid "Redo last action"
msgstr "Son eylemi yeniden yap"

#: ../src/common/stockitem.cpp:186
msgid "Refresh"
msgstr "Yenile"

#: ../src/msw/registry.cpp:626
#, c-format
msgid "Registry key '%s' already exists."
msgstr "'%s' kayıt anahtarı zaten var."

#: ../src/msw/registry.cpp:595
#, c-format
msgid "Registry key '%s' does not exist, cannot rename it."
msgstr "'%s' kayıt anahtarı bulunamadığından yeniden adlandırılamıyor."

#: ../src/msw/registry.cpp:727
#, c-format
msgid ""
"Registry key '%s' is needed for normal system operation,\n"
"deleting it will leave your system in unusable state:\n"
"operation aborted."
msgstr ""
"'%s' kayıt anahtarı normal sistem işlemleri için gerekiyor,\n"
"silinmesi sistemi kararsız bir hale getirir:\n"
"işlem iptal edildi."

#: ../src/msw/registry.cpp:954
#, c-format
msgid "Registry value \"%s\" is not binary (but of type %s)"
msgstr "\"%s\" kayıt anahtarı ikili (ya da %s türünde) değil"

#: ../src/msw/registry.cpp:917
#, c-format
msgid "Registry value \"%s\" is not numeric (but of type %s)"
msgstr "\"%s\" kayıt anahtarı sayısal (ya da %s türünde) değil"

#: ../src/msw/registry.cpp:1003
#, c-format
msgid "Registry value \"%s\" is not text (but of type %s)"
msgstr "\"%s\" kayıt anahtarı metin (ya da %s türünde) değil"

#: ../src/msw/registry.cpp:521
#, c-format
msgid "Registry value '%s' already exists."
msgstr "'%s' kayıt değeri zaten var."

#: ../src/richtext/richtextsizepage.cpp:519
msgid "Relative"
msgstr "Bağıl"

#: ../src/generic/helpext.cpp:458
msgid "Relevant entries:"
msgstr "İlgili kayıtlar:"

#: ../include/wx/generic/progdlgg.h:86
msgid "Remaining time:"
msgstr "Kalan süre:"

#: ../src/richtext/richtextctrl.cpp:1562
msgid "Remove Bullet"
msgstr "Madde İmini Kaldır"

#: ../src/html/helpwnd.cpp:433
msgid "Remove current page from bookmarks"
msgstr "Geçerli sayfayı yer imlerinden sil"

#: ../src/common/rendcmn.cpp:194
#, c-format
msgid "Renderer \"%s\" has incompatible version %d.%d and couldn't be loaded."
msgstr "\"%s\" görüntüleyicisinin %d.%d sürümü uyumsuz olduğundan yüklenemedi."

#: ../src/richtext/richtextbuffer.cpp:4527
msgid "Renumber List"
msgstr "Listeyi Yeniden Numarala"

#: ../src/common/stockitem.cpp:188
msgid "Rep&lace"
msgstr "&Değiştir"

#: ../src/richtext/richtextctrl.cpp:3673 ../src/common/stockitem.cpp:188
msgid "Replace"
msgstr "Değiştir"

#: ../src/generic/fdrepdlg.cpp:182
msgid "Replace &all"
msgstr "&Tümünü değiştir"

#: ../src/common/stockitem.cpp:261
msgid "Replace selection"
msgstr "Seçimi değiştir"

#: ../src/generic/fdrepdlg.cpp:124
msgid "Replace with:"
msgstr "Şununla değiştir:"

#: ../src/common/valtext.cpp:163
msgid "Required information entry is empty."
msgstr "Gereken bilgi kayıdı boş."

#: ../src/common/translation.cpp:1975
#, c-format
msgid "Resource '%s' is not a valid message catalog."
msgstr "'%s' kaynağı geçerli bir ileti kataloğu değil."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:56
msgid "Return"
msgstr "Return"

#: ../src/common/stockitem.cpp:189
msgid "Revert to Saved"
msgstr "Kaydedilmiş Olana Geri Dön"

#: ../src/richtext/richtextborderspage.cpp:616
msgid "Ridge"
msgstr "Sırt"

#: ../src/richtext/richtextfontpage.cpp:313
msgid "Rig&ht-to-left"
msgstr "Sağ&dan sola"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1754
msgid "Right Arrow"
msgstr "Sağ Ok"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1770
msgid "Right Button"
msgstr "Sağ Düğme"

#: ../src/generic/prntdlgg.cpp:892
msgid "Right margin (mm):"
msgstr "Sağ kenar boşluğu (mm):"

#: ../src/richtext/richtextindentspage.cpp:148
#: ../src/richtext/richtextindentspage.cpp:150
#: ../src/richtext/richtextliststylepage.cpp:337
#: ../src/richtext/richtextliststylepage.cpp:339
msgid "Right-align text."
msgstr "Metin sağa yaslanır."

#: ../src/generic/fontdlgg.cpp:322
msgid "Roman"
msgstr "Roman"

#: ../src/generic/datavgen.cpp:5916
#, c-format
msgid "Row %i"
msgstr "Satır %i"

#: ../src/richtext/richtextliststylepage.cpp:299
#: ../src/richtext/richtextbulletspage.cpp:239
msgid "S&tandard bullet name:"
msgstr "S&tandart madde imi adı:"

#: ../src/common/accelcmn.cpp:268 ../src/common/accelcmn.cpp:350
msgid "SPECIAL"
msgstr "SPECIAL"

#: ../src/common/fldlgcmn.cpp:342
#, c-format
msgid "Save %s file"
msgstr "%s dosyasını kaydet"

#: ../src/generic/logg.cpp:512
msgid "Save &As..."
msgstr "&Farklı Kaydet..."

#: ../src/common/docview.cpp:366
msgid "Save As"
msgstr "Farklı Kaydet"

#: ../src/common/stockitem.cpp:191
msgid "Save as"
msgstr "Farklı kaydet"

#: ../src/common/stockitem.cpp:267
msgid "Save current document"
msgstr "Geçerli belgeyi kaydet"

#: ../src/common/stockitem.cpp:268
msgid "Save current document with a different filename"
msgstr "Geçerli belgeyi farklı bir adla kaydet"

#: ../src/generic/logg.cpp:512
msgid "Save log contents to file"
msgstr "Günlük içeriğini dosyaya kaydet"

#: ../src/common/secretstore.cpp:179
#, c-format
msgid "Saving password for \"%s/%s\" failed: %s."
msgstr "\"%s/%s\" için parola kaydedilemedi: %s."

#: ../src/generic/fontdlgg.cpp:325
msgid "Script"
msgstr "Betik"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Scroll Lock"
msgstr "Scroll Lock"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:87
msgid "Scroll_lock"
msgstr "Scroll_lock"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:890
msgid "Scrollbar"
msgstr "Kaydırma çubuğu"

#: ../src/html/helpwnd.cpp:537
msgid ""
"Search contents of help book(s) for all occurrences of the text you typed "
"above"
msgstr "Yukarıya yazılan metin yardım kitapları içinde her türlü aranır"

#: ../src/generic/fdrepdlg.cpp:160
msgid "Search direction"
msgstr "Arama yönü"

#: ../src/generic/fdrepdlg.cpp:112
msgid "Search for:"
msgstr "Aranan:"

#: ../src/html/helpwnd.cpp:1052
msgid "Search in all books"
msgstr "Tüm kitaplarda ara"

#: ../src/html/helpwnd.cpp:857
msgid "Searching..."
msgstr "Aranıyor..."

#: ../src/generic/dirctrlg.cpp:446
msgid "Sections"
msgstr "Bölümler"

#: ../src/common/ffile.cpp:238
#, c-format
msgid "Seek error on file '%s'"
msgstr "'%s' dosyasında arama sorunu"

#: ../src/common/ffile.cpp:228
#, c-format
msgid "Seek error on file '%s' (large files not supported by stdio)"
msgstr ""
"'%s' dosyasında arama hatası (büyük dosyalar 'stdio' tarafından "
"desteklenmiyor)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:76
msgid "Select"
msgstr "Seçin"

#: ../src/richtext/richtextctrl.cpp:337 ../src/osx/textctrl_osx.cpp:581
#: ../src/common/stockitem.cpp:192 ../src/msw/textctrl.cpp:2512
msgid "Select &All"
msgstr "&Tümünü Seç"

#: ../src/common/stockitem.cpp:192 ../src/stc/stc_i18n.cpp:21
msgid "Select All"
msgstr "Tümünü Seç"

#: ../src/common/docview.cpp:1895
msgid "Select a document template"
msgstr "Bir belge şablonu seçin"

#: ../src/common/docview.cpp:1969
msgid "Select a document view"
msgstr "Bir belge görünümü seçin"

#: ../src/richtext/richtextfontpage.cpp:226
#: ../src/richtext/richtextfontpage.cpp:228
msgid "Select regular or bold."
msgstr "Normal ya da koyu biçemi seçin."

#: ../src/richtext/richtextfontpage.cpp:213
#: ../src/richtext/richtextfontpage.cpp:215
msgid "Select regular or italic style."
msgstr "Normal ya da yatık biçemi seçin."

#: ../src/richtext/richtextfontpage.cpp:239
#: ../src/richtext/richtextfontpage.cpp:241
msgid "Select underlining or no underlining."
msgstr "Altı çizili ya da normal biçemi seçin."

#: ../src/motif/filedlg.cpp:220
msgid "Selection"
msgstr "Seçim"

#: ../src/richtext/richtextliststylepage.cpp:187
#: ../src/richtext/richtextliststylepage.cpp:189
msgid "Selects the list level to edit."
msgstr "Düzenlenecek liste düzeyini seçer."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:82
msgid "Separator"
msgstr "Ayıraç"

#: ../src/common/cmdline.cpp:1083
#, c-format
msgid "Separator expected after the option '%s'."
msgstr "'%s' seçeneğinden sonra ayraç bekleniyor."

#: ../src/osx/menu_osx.cpp:572
msgid "Services"
msgstr "Hizmetler"

#: ../src/richtext/richtextbuffer.cpp:11217
msgid "Set Cell Style"
msgstr "Hücre Biçemini Ayarla"

#: ../include/wx/xtiprop.h:175
msgid "SetProperty called w/o valid setter"
msgstr "'SetProperty' işlevi geçerli bir yerleştirici olmaksızın çağrıldı"

#: ../src/generic/prntdlgg.cpp:188
msgid "Setup..."
msgstr "Kurulum..."

#: ../src/msw/dialup.cpp:544
msgid "Several active dialup connections found, choosing one randomly."
msgstr "Birkaç etkin çevirmeli bağlantı bulundu, rastgele biri seçiliyor."

#: ../src/richtext/richtextbackgroundpage.cpp:271
msgid "Sh&adow spread:"
msgstr "&Gölge yayılması:"

#: ../src/richtext/richtextbackgroundpage.cpp:179
msgid "Shadow"
msgstr "Gölge"

#: ../src/richtext/richtextbackgroundpage.cpp:258
msgid "Shadow c&olour:"
msgstr "Gölge re&ngi:"

#: ../src/common/accelcmn.cpp:335
msgid "Shift+"
msgstr "Shift+"

#: ../src/generic/dirdlgg.cpp:147
msgid "Show &hidden directories"
msgstr "Gizli &klasörleri görüntüle"

#: ../src/generic/filectrlg.cpp:983
msgid "Show &hidden files"
msgstr "Gizli &dosyaları görüntüle"

#: ../src/osx/menu_osx.cpp:580
msgid "Show All"
msgstr "Tümünü Görüntüle"

#: ../src/html/helpwnd.cpp:492
msgid "Show all"
msgstr "Tümünü görüntüle"

#: ../src/html/helpwnd.cpp:503
msgid "Show all items in index"
msgstr "Dizindeki tüm ögeleri görüntüle"

#: ../src/html/helpwnd.cpp:658
msgid "Show/hide navigation panel"
msgstr "Gezinti panosunu görüntüle/gizle"

#: ../src/richtext/richtextsymboldlg.cpp:421
#: ../src/richtext/richtextsymboldlg.cpp:423
msgid "Shows a Unicode subset."
msgstr "Bir Unikod alt kümesini görüntüler."

#: ../src/richtext/richtextliststylepage.cpp:472
#: ../src/richtext/richtextliststylepage.cpp:474
#: ../src/richtext/richtextbulletspage.cpp:263
#: ../src/richtext/richtextbulletspage.cpp:265
msgid "Shows a preview of the bullet settings."
msgstr "Madde imi ayarlarının önizlemesini görüntüler."

#: ../src/richtext/richtextfontpage.cpp:330
#: ../src/richtext/richtextfontpage.cpp:332
msgid "Shows a preview of the font settings."
msgstr "Yazı türü ayarlarının bir önizlemesini görüntüler."

#: ../src/osx/carbon/fontdlg.cpp:394 ../src/osx/carbon/fontdlg.cpp:396
msgid "Shows a preview of the font."
msgstr "Yazı türünün önizlemesini görüntüler."

#: ../src/richtext/richtextindentspage.cpp:303
#: ../src/richtext/richtextindentspage.cpp:305
msgid "Shows a preview of the paragraph settings."
msgstr "Paragraf ayarlarının önizlemesini görüntüler."

#: ../src/generic/fontdlgg.cpp:460 ../src/generic/fontdlgg.cpp:462
msgid "Shows the font preview."
msgstr "Yazı türünün önizlemesini görüntüler."

#: ../src/propgrid/advprops.cpp:1607
msgid "Silver"
msgstr "Gümüş"

#: ../src/univ/themes/mono.cpp:516
msgid "Simple monochrome theme"
msgstr "Basit tek renkli tema"

#: ../src/richtext/richtextindentspage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:449
msgid "Single"
msgstr "Tek"

#: ../src/osx/carbon/fontdlg.cpp:339
msgid "Size:"
msgstr "Boyut:"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1775
msgid "Sizing"
msgstr "Boyutlandırma"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1772
msgid "Sizing N-S"
msgstr "Boyutlandırma K-G"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1771
msgid "Sizing NE-SW"
msgstr "Boyutlandırma KD-GB"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1773
msgid "Sizing NW-SE"
msgstr "Boyutlandırma KB-GD"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1774
msgid "Sizing W-E"
msgstr "Boyutlandırma B-D"

#: ../src/msw/progdlg.cpp:801
msgid "Skip"
msgstr "Atla"

#: ../src/generic/fontdlgg.cpp:330
msgid "Slant"
msgstr "Eğik"

#: ../src/richtext/richtextfontpage.cpp:289
msgid "Small C&apitals"
msgstr "Küçük H&arfler"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:79
msgid "Snapshot"
msgstr "Ekran görüntüsü"

#: ../src/richtext/richtextborderspage.cpp:611
msgid "Solid"
msgstr "Katı"

#: ../src/common/docview.cpp:1791
msgid "Sorry, could not open this file."
msgstr "Maalesef bu dosya açılamıyor."

#: ../src/common/prntbase.cpp:2057 ../src/common/prntbase.cpp:2065
msgid "Sorry, not enough memory to create a preview."
msgstr "Maalesef önizleme oluşturmak için yeterli bellek yok."

#: ../src/richtext/richtextstyledlg.cpp:611
#: ../src/richtext/richtextstyledlg.cpp:659
#: ../src/richtext/richtextstyledlg.cpp:825
#: ../src/richtext/richtextstyledlg.cpp:901
#: ../src/richtext/richtextstyledlg.cpp:939
msgid "Sorry, that name is taken. Please choose another."
msgstr "Maalesef bu ad kullanılmış. Lütfen başka bir ad seçin."

#: ../src/common/docview.cpp:1814
msgid "Sorry, the format for this file is unknown."
msgstr "Maalesef bu dosyanın biçimi bilinmiyor."

#: ../src/unix/sound.cpp:492
msgid "Sound data are in unsupported format."
msgstr "Ses verisi biçimi desteklenmiyor."

#: ../src/unix/sound.cpp:477
#, c-format
msgid "Sound file '%s' is in unsupported format."
msgstr "'%s' ses dosyasının biçimi desteklenmiyor."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:67
msgid "Space"
msgstr "Boşluk"

#: ../src/common/stockitem.cpp:197
msgid "Spell Check"
msgstr "Yazım Denetimi"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1776
msgid "Spraycan"
msgstr "Sprey"

#: ../src/common/paper.cpp:104
msgid "Statement, 5 1/2 x 8 1/2 in"
msgstr "Statement, 5 1/2 x 8 1/2 inç"

#: ../src/richtext/richtextsizepage.cpp:518
#: ../src/richtext/richtextsizepage.cpp:523
msgid "Static"
msgstr "Durağan"

#: ../src/common/stockitem.cpp:198
msgid "Stop"
msgstr "Durdur"

#: ../src/common/stockitem.cpp:199
msgid "Strikethrough"
msgstr "Üstü çizili"

#: ../src/common/colourcmn.cpp:45
#, c-format
msgid "String To Colour : Incorrect colour specification : %s"
msgstr "Dizgeden Renge: Hatalı renk tanımı: %s"

#: ../include/wx/richtext/richtextstyledlg.h:46
msgid "Style Organiser"
msgstr "Biçem Düzenleyici"

#: ../src/osx/carbon/fontdlg.cpp:348
msgid "Style:"
msgstr "Biçem:"

#: ../src/richtext/richtextfontpage.cpp:303
msgid "Subscrip&t"
msgstr "Al&t karakter"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:83
msgid "Subtract"
msgstr "Eksi"

#: ../src/richtext/richtextfontpage.cpp:296
msgid "Supe&rscript"
msgstr "Ü&st karakter"

#: ../src/common/paper.cpp:150
msgid "SuperA/SuperA/A4 227 x 356 mm"
msgstr "SuperA/SuperA/A4 227 x 356 mm"

#: ../src/common/paper.cpp:151
msgid "SuperB/SuperB/A3 305 x 487 mm"
msgstr "SuperB/SuperB/A3 305 x 487 mm"

#: ../src/richtext/richtextfontpage.cpp:320
msgid "Suppress hyphe&nation"
msgstr "Heceleme e&ngellensin"

#: ../src/generic/fontdlgg.cpp:326
msgid "Swiss"
msgstr "İsveç"

#: ../src/richtext/richtextliststylepage.cpp:488
#: ../src/richtext/richtextbulletspage.cpp:280
msgid "Symbol"
msgstr "Simge"

#: ../src/richtext/richtextliststylepage.cpp:288
#: ../src/richtext/richtextbulletspage.cpp:227
msgid "Symbol &font:"
msgstr "Simge &yazı türü:"

#: ../include/wx/richtext/richtextsymboldlg.h:47
msgid "Symbols"
msgstr "Simgeler"

#: ../src/common/imagtiff.cpp:369 ../src/common/imagtiff.cpp:382
#: ../src/common/imagtiff.cpp:741
msgid "TIFF: Couldn't allocate memory."
msgstr "TIFF: Bellek ayrılamadı."

#: ../src/common/imagtiff.cpp:301
msgid "TIFF: Error loading image."
msgstr "TIFF: Görsel yükleme sorunu."

#: ../src/common/imagtiff.cpp:468
msgid "TIFF: Error reading image."
msgstr "TIFF: Görsel okuma sorunu."

#: ../src/common/imagtiff.cpp:608
msgid "TIFF: Error saving image."
msgstr "TIFF: Görsel kaydetme sorunu."

#: ../src/common/imagtiff.cpp:846
msgid "TIFF: Error writing image."
msgstr "TIFF: Görsel yazma sorunu."

#: ../src/common/imagtiff.cpp:355
msgid "TIFF: Image size is abnormally big."
msgstr "TIFF: Görsel boyutu anormal büyük."

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:68
msgid "Tab"
msgstr "Sekme"

#: ../src/richtext/richtextbuffer.cpp:11498
msgid "Table Properties"
msgstr "Tablo Özellikleri"

#: ../src/common/paper.cpp:145
msgid "Tabloid Extra 11.69 x 18 in"
msgstr "Tabloid Ek 11.69 x 18 inç"

#: ../src/common/paper.cpp:102
msgid "Tabloid, 11 x 17 in"
msgstr "Tabloid, 11 x 17 inç"

#: ../src/richtext/richtextformatdlg.cpp:354
msgid "Tabs"
msgstr "Sekmeler"

#: ../src/propgrid/advprops.cpp:1598
msgid "Teal"
msgstr "Yeşilimsi mavi"

#: ../src/generic/fontdlgg.cpp:327
msgid "Teletype"
msgstr "Teletype"

#: ../src/common/docview.cpp:1896
msgid "Templates"
msgstr "Kalıplar"

#: ../src/common/fmapbase.cpp:158
msgid "Thai (ISO-8859-11)"
msgstr "Thai (ISO-8859-11)"

#: ../src/common/ftp.cpp:619
msgid "The FTP server doesn't support passive mode."
msgstr "FTP sunucusu pasif kipi desteklemiyor."

#: ../src/common/ftp.cpp:605
msgid "The FTP server doesn't support the PORT command."
msgstr "FTP sunucusu PORT komutunu desteklemiyor."

#: ../src/richtext/richtextliststylepage.cpp:215
#: ../src/richtext/richtextliststylepage.cpp:217
#: ../src/richtext/richtextbulletspage.cpp:151
#: ../src/richtext/richtextbulletspage.cpp:153
msgid "The available bullet styles."
msgstr "Kullanılabilecek madde imi biçemleri."

#: ../src/richtext/richtextstyledlg.cpp:202
#: ../src/richtext/richtextstyledlg.cpp:204
msgid "The available styles."
msgstr "Kullanılabilecek biçemler."

#: ../src/richtext/richtextbackgroundpage.cpp:168
#: ../src/richtext/richtextbackgroundpage.cpp:170
msgid "The background colour."
msgstr "Art alan rengi."

#: ../src/richtext/richtextborderspage.cpp:267
#: ../src/richtext/richtextborderspage.cpp:269
#: ../src/richtext/richtextborderspage.cpp:301
#: ../src/richtext/richtextborderspage.cpp:303
#: ../src/richtext/richtextborderspage.cpp:335
#: ../src/richtext/richtextborderspage.cpp:337
#: ../src/richtext/richtextborderspage.cpp:369
#: ../src/richtext/richtextborderspage.cpp:371
#: ../src/richtext/richtextborderspage.cpp:435
#: ../src/richtext/richtextborderspage.cpp:437
#: ../src/richtext/richtextborderspage.cpp:469
#: ../src/richtext/richtextborderspage.cpp:471
#: ../src/richtext/richtextborderspage.cpp:503
#: ../src/richtext/richtextborderspage.cpp:505
#: ../src/richtext/richtextborderspage.cpp:537
#: ../src/richtext/richtextborderspage.cpp:539
msgid "The border line style."
msgstr "Kenarlık çizgisi biçemi."

#: ../src/richtext/richtextmarginspage.cpp:267
#: ../src/richtext/richtextmarginspage.cpp:269
msgid "The bottom margin size."
msgstr "Alt kenar boşluğunun boyutu."

#: ../src/richtext/richtextmarginspage.cpp:381
#: ../src/richtext/richtextmarginspage.cpp:383
msgid "The bottom padding size."
msgstr "Alt yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:639
#: ../src/richtext/richtextsizepage.cpp:641
#: ../src/richtext/richtextsizepage.cpp:653
#: ../src/richtext/richtextsizepage.cpp:655
msgid "The bottom position."
msgstr "Alt konum."

#: ../src/richtext/richtextliststylepage.cpp:254
#: ../src/richtext/richtextliststylepage.cpp:256
#: ../src/richtext/richtextliststylepage.cpp:275
#: ../src/richtext/richtextliststylepage.cpp:277
#: ../src/richtext/richtextbulletspage.cpp:191
#: ../src/richtext/richtextbulletspage.cpp:193
#: ../src/richtext/richtextbulletspage.cpp:214
#: ../src/richtext/richtextbulletspage.cpp:216
msgid "The bullet character."
msgstr "Madde imi karakteri."

#: ../src/richtext/richtextsymboldlg.cpp:443
#: ../src/richtext/richtextsymboldlg.cpp:445
msgid "The character code."
msgstr "Karakter kodu."

#: ../src/common/fontmap.cpp:203
#, c-format
msgid ""
"The charset '%s' is unknown. You may select\n"
"another charset to replace it with or choose\n"
"[Cancel] if it cannot be replaced"
msgstr ""
"'%s' karakter kümesi bilinmiyor. Yerine\n"
"başka bir tane seçebilir ya da \n"
"seçemiyorsanız [İptal] düğmesine tıklayabilirsiniz"

#: ../src/msw/ole/dataobj.cpp:394
#, c-format
msgid "The clipboard format '%d' doesn't exist."
msgstr "'%d' pano biçimi bulunamıyor."

#: ../src/richtext/richtextstylepage.cpp:130
#: ../src/richtext/richtextstylepage.cpp:132
msgid "The default style for the next paragraph."
msgstr "Sonraki paragraf için varsayılan biçem."

#: ../src/generic/dirdlgg.cpp:202
#, c-format
msgid ""
"The directory '%s' does not exist\n"
"Create it now?"
msgstr ""
"'%s' klasörü bulunamadı\n"
"Şimdi oluşturulsun mu?"

#: ../src/html/htmprint.cpp:271
#, c-format
msgid ""
"The document \"%s\" doesn't fit on the page horizontally and will be "
"truncated if printed.\n"
"\n"
"Would you like to proceed with printing it nevertheless?"
msgstr ""
"\"%s\" belgesi sayfaya yatay olarak sığmıyor ve yazdırılırsa budanacak.\n"
"\n"
"Buna rağmen yazdırmak istiyor musunuz?"

#: ../src/common/docview.cpp:1202
#, c-format
msgid ""
"The file '%s' doesn't exist and couldn't be opened.\n"
"It has been removed from the most recently used files list."
msgstr ""
"'%s' dosyası yok ve açılamadı.\n"
"Son kullanılan dosyalar listesinden kaldırıldı."

#: ../src/richtext/richtextindentspage.cpp:208
#: ../src/richtext/richtextindentspage.cpp:210
#: ../src/richtext/richtextliststylepage.cpp:394
#: ../src/richtext/richtextliststylepage.cpp:396
msgid "The first line indent."
msgstr "İlk satır girintisi."

#: ../src/gtk/utilsgtk.cpp:481
msgid "The following standard GTK+ options are also supported:\n"
msgstr "Aşağıdaki standart GTK+ seçenekleri de desteklenmektedir:\n"

#: ../src/generic/fontdlgg.cpp:414 ../src/generic/fontdlgg.cpp:416
msgid "The font colour."
msgstr "Yazı türü rengi."

#: ../src/generic/fontdlgg.cpp:375 ../src/generic/fontdlgg.cpp:377
msgid "The font family."
msgstr "Yazı türü ailesi."

#: ../src/richtext/richtextsymboldlg.cpp:405
#: ../src/richtext/richtextsymboldlg.cpp:407
msgid "The font from which to take the symbol."
msgstr "Simgenin alınacağı yazı türü."

#: ../src/generic/fontdlgg.cpp:427 ../src/generic/fontdlgg.cpp:429
#: ../src/generic/fontdlgg.cpp:434 ../src/generic/fontdlgg.cpp:436
msgid "The font point size."
msgstr "Yazı türü punto boyutu."

#: ../src/osx/carbon/fontdlg.cpp:343 ../src/osx/carbon/fontdlg.cpp:345
msgid "The font size in points."
msgstr "Punto cinsinden yazı türü boyutu."

#: ../src/richtext/richtextfontpage.cpp:181
#: ../src/richtext/richtextfontpage.cpp:183
msgid "The font size units, points or pixels."
msgstr "Yazı türü boyutu birimi, punto ya da piksel."

#: ../src/generic/fontdlgg.cpp:386 ../src/generic/fontdlgg.cpp:388
msgid "The font style."
msgstr "Yazı türü biçemi."

#: ../src/generic/fontdlgg.cpp:397 ../src/generic/fontdlgg.cpp:399
msgid "The font weight."
msgstr "Yazı türü yoğunluğu."

#: ../src/common/docview.cpp:1483
#, c-format
msgid "The format of file '%s' couldn't be determined."
msgstr "'%s' dosyasının biçimi belirlenemedi."

#: ../src/richtext/richtextbackgroundpage.cpp:219
#: ../src/richtext/richtextbackgroundpage.cpp:221
msgid "The horizontal offset."
msgstr "Yatay öteleme."

#: ../src/richtext/richtextindentspage.cpp:199
#: ../src/richtext/richtextindentspage.cpp:201
#: ../src/richtext/richtextliststylepage.cpp:385
#: ../src/richtext/richtextliststylepage.cpp:387
msgid "The left indent."
msgstr "Sol girinti."

#: ../src/richtext/richtextmarginspage.cpp:194
#: ../src/richtext/richtextmarginspage.cpp:196
msgid "The left margin size."
msgstr "Sol kenar boşluğu boyutu."

#: ../src/richtext/richtextmarginspage.cpp:308
#: ../src/richtext/richtextmarginspage.cpp:310
msgid "The left padding size."
msgstr "Sol yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:534
#: ../src/richtext/richtextsizepage.cpp:536
#: ../src/richtext/richtextsizepage.cpp:548
#: ../src/richtext/richtextsizepage.cpp:550
msgid "The left position."
msgstr "Sol konum."

#: ../src/richtext/richtextindentspage.cpp:288
#: ../src/richtext/richtextindentspage.cpp:290
#: ../src/richtext/richtextliststylepage.cpp:462
#: ../src/richtext/richtextliststylepage.cpp:464
msgid "The line spacing."
msgstr "Satır aralığı."

#: ../src/richtext/richtextbulletspage.cpp:255
#: ../src/richtext/richtextbulletspage.cpp:257
msgid "The list item number."
msgstr "Liste ögesi numarası."

#: ../src/msw/ole/automtn.cpp:664
msgid "The locale ID is unknown."
msgstr "Yerel kodu bilinmiyor."

#: ../src/richtext/richtextsizepage.cpp:366
#: ../src/richtext/richtextsizepage.cpp:368
msgid "The object height."
msgstr "Nesne yüksekliği."

#: ../src/richtext/richtextsizepage.cpp:474
#: ../src/richtext/richtextsizepage.cpp:476
msgid "The object maximum height."
msgstr "En fazla nesne yüksekliği."

#: ../src/richtext/richtextsizepage.cpp:447
#: ../src/richtext/richtextsizepage.cpp:449
msgid "The object maximum width."
msgstr "En fazla nesne genişliği."

#: ../src/richtext/richtextsizepage.cpp:420
#: ../src/richtext/richtextsizepage.cpp:422
msgid "The object minimum height."
msgstr "En az nesne yüksekliği."

#: ../src/richtext/richtextsizepage.cpp:393
#: ../src/richtext/richtextsizepage.cpp:395
msgid "The object minimum width."
msgstr "En az nesne genişliği."

#: ../src/richtext/richtextsizepage.cpp:332
#: ../src/richtext/richtextsizepage.cpp:334
msgid "The object width."
msgstr "Nesne genişliği."

#: ../src/richtext/richtextindentspage.cpp:227
#: ../src/richtext/richtextindentspage.cpp:229
msgid "The outline level."
msgstr "Taslak düzeyi."

#: ../src/common/log.cpp:277
#, c-format
msgid "The previous message repeated %u time."
msgid_plural "The previous message repeated %u times."
msgstr[0] "Önceki ileti %u kez yinelendi."

#: ../src/common/log.cpp:270
msgid "The previous message repeated once."
msgstr "Önceki ileti bir kez yinelendi."

#: ../src/richtext/richtextsymboldlg.cpp:462
#: ../src/richtext/richtextsymboldlg.cpp:464
msgid "The range to show."
msgstr "Görüntülenecek aralık."

#: ../src/generic/dbgrptg.cpp:322
msgid ""
"The report contains the files listed below. If any of these files contain "
"private information,\n"
"please uncheck them and they will be removed from the report.\n"
msgstr ""
"Bu rapor aşağıdaki dosyaları içermektedir. Bu dosyalarda özel bilgileriniz "
"varsa,\n"
"rapordan çıkarmak istediğiniz dosyaların işaretini kaldırın.\n"

#: ../src/common/cmdline.cpp:1254
#, c-format
msgid "The required parameter '%s' was not specified."
msgstr "Gerekli '%s' parametresi belirtilmemiş."

#: ../src/richtext/richtextindentspage.cpp:217
#: ../src/richtext/richtextindentspage.cpp:219
#: ../src/richtext/richtextliststylepage.cpp:403
#: ../src/richtext/richtextliststylepage.cpp:405
msgid "The right indent."
msgstr "Sağ girinti."

#: ../src/richtext/richtextmarginspage.cpp:219
#: ../src/richtext/richtextmarginspage.cpp:221
msgid "The right margin size."
msgstr "Sağ kenar boşluğu boyutu."

#: ../src/richtext/richtextmarginspage.cpp:333
#: ../src/richtext/richtextmarginspage.cpp:335
msgid "The right padding size."
msgstr "Sağ yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:604
#: ../src/richtext/richtextsizepage.cpp:606
#: ../src/richtext/richtextsizepage.cpp:618
#: ../src/richtext/richtextsizepage.cpp:620
msgid "The right position."
msgstr "Sağ konum."

#: ../src/richtext/richtextbackgroundpage.cpp:309
#: ../src/richtext/richtextbackgroundpage.cpp:311
msgid "The shadow blur distance."
msgstr "Gölge bulanıklaştırma uzaklığı."

#: ../src/richtext/richtextbackgroundpage.cpp:266
#: ../src/richtext/richtextbackgroundpage.cpp:268
msgid "The shadow colour."
msgstr "Gölge rengi.."

#: ../src/richtext/richtextbackgroundpage.cpp:336
#: ../src/richtext/richtextbackgroundpage.cpp:338
msgid "The shadow opacity."
msgstr "Gölge matlığı."

#: ../src/richtext/richtextbackgroundpage.cpp:282
#: ../src/richtext/richtextbackgroundpage.cpp:284
msgid "The shadow spread."
msgstr "Gölge yayılması."

#: ../src/richtext/richtextindentspage.cpp:267
#: ../src/richtext/richtextliststylepage.cpp:439
#: ../src/richtext/richtextliststylepage.cpp:441
msgid "The spacing after the paragraph."
msgstr "Paragraftan sonraki boşluk."

#: ../src/richtext/richtextindentspage.cpp:257
#: ../src/richtext/richtextindentspage.cpp:259
#: ../src/richtext/richtextliststylepage.cpp:430
#: ../src/richtext/richtextliststylepage.cpp:432
msgid "The spacing before the paragraph."
msgstr "Paragraftan önceki boşluk."

#: ../src/richtext/richtextstylepage.cpp:110
#: ../src/richtext/richtextstylepage.cpp:112
msgid "The style name."
msgstr "Biçem adı."

#: ../src/richtext/richtextstylepage.cpp:120
#: ../src/richtext/richtextstylepage.cpp:122
msgid "The style on which this style is based."
msgstr "Bu biçemin temel alındığı biçem."

#: ../src/richtext/richtextstyledlg.cpp:214
#: ../src/richtext/richtextstyledlg.cpp:216
msgid "The style preview."
msgstr "Biçem önizlemesi."

#: ../src/msw/ole/automtn.cpp:680
msgid "The system cannot find the file specified."
msgstr "Sistem belirtilen dosyayı bulamadı."

#: ../src/richtext/richtexttabspage.cpp:114
#: ../src/richtext/richtexttabspage.cpp:116
msgid "The tab position."
msgstr "Sekme konumu."

#: ../src/richtext/richtexttabspage.cpp:120
msgid "The tab positions."
msgstr "Sekme konumları."

#: ../src/richtext/richtextctrl.cpp:3098
msgid "The text couldn't be saved."
msgstr "Metin kaydedilemedi."

#: ../src/richtext/richtextmarginspage.cpp:242
#: ../src/richtext/richtextmarginspage.cpp:244
msgid "The top margin size."
msgstr "Üst kenar boşluğu boyutu."

#: ../src/richtext/richtextmarginspage.cpp:356
#: ../src/richtext/richtextmarginspage.cpp:358
msgid "The top padding size."
msgstr "Üst yastıklama boyutu."

#: ../src/richtext/richtextsizepage.cpp:569
#: ../src/richtext/richtextsizepage.cpp:571
#: ../src/richtext/richtextsizepage.cpp:583
#: ../src/richtext/richtextsizepage.cpp:585
msgid "The top position."
msgstr "Üst konum."

#: ../src/common/cmdline.cpp:1232
#, c-format
msgid "The value for the option '%s' must be specified."
msgstr "'%s' seçeneği için değer belirtilmelidir."

#: ../src/richtext/richtextborderspage.cpp:585
#: ../src/richtext/richtextborderspage.cpp:587
msgid "The value of the corner radius."
msgstr "Köşe yarıçapı değeri."

#: ../src/msw/dialup.cpp:433
#, c-format
msgid ""
"The version of remote access service (RAS) installed on this machine is too "
"old, please upgrade (the following required function is missing: %s)."
msgstr ""
"Bu bilgisayarda kurulu uzak erişim hizmetinin (RAS) sürümü çok eski, lütfen "
"yükseltin (gereken şu işlev eksik: %s)."

#: ../src/richtext/richtextbackgroundpage.cpp:242
#: ../src/richtext/richtextbackgroundpage.cpp:244
msgid "The vertical offset."
msgstr "Dikey öteleme."

#: ../src/richtext/richtextprint.cpp:619 ../src/html/htmprint.cpp:745
msgid ""
"There was a problem during page setup: you may need to set a default printer."
msgstr ""
"Sayfa ayarlanırken bir sorun çıktı: bir varsayılan yazıcı belirlemeniz "
"gerekebilir."

#: ../src/html/htmprint.cpp:255
msgid ""
"This document doesn't fit on the page horizontally and will be truncated "
"when it is printed."
msgstr "Bu belge sayfaya yatay olarak sığmıyor ve yazdırılırsa budanacak."

#: ../src/common/image.cpp:2854
#, c-format
msgid "This is not a %s."
msgstr "Bu bir %s değil."

#: ../src/common/wincmn.cpp:1653
msgid "This platform does not support background transparency."
msgstr "Bu platformda art alan saydamlığı desteklenmiyor."

#: ../src/gtk/window.cpp:4660
msgid ""
"This program was compiled with a too old version of GTK+, please rebuild "
"with GTK+ 2.12 or newer."
msgstr ""
"Bu program çok eski bir GTK+ sürümüyle derlenmiş. Lütfen GTK+ 2.12 ya da "
"üzeri bir sürümle yeniden derleyin."

#: ../src/msw/thread.cpp:1240
msgid ""
"Thread module initialization failed: cannot store value in thread local "
"storage"
msgstr "İş parçacığı modülü başlatılamadı: yerel depoya değer koyulamıyor"

#: ../src/unix/threadpsx.cpp:1794
msgid "Thread module initialization failed: failed to create thread key"
msgstr ""
"İş parçacığı modülü başlatılamadı: iş parçacığı anahtarı oluşturulamadı"

#: ../src/msw/thread.cpp:1228
msgid ""
"Thread module initialization failed: impossible to allocate index in thread "
"local storage"
msgstr "İş parçacığı modülü başlatılamadı: yerel depoda dizin oluşturulamıyor"

#: ../src/unix/threadpsx.cpp:1043
msgid "Thread priority setting is ignored."
msgstr "İş parçacığı öncelik ayarları yok sayıldı."

#: ../src/msw/mdi.cpp:176
msgid "Tile &Horizontally"
msgstr "&Yatay Döşe"

#: ../src/msw/mdi.cpp:177
msgid "Tile &Vertically"
msgstr "&Dikey Döşe"

#: ../src/common/ftp.cpp:200
msgid "Timeout while waiting for FTP server to connect, try passive mode."
msgstr "FTP sunucu bağlantısı zaman aşımına uğradı, pasif kipi deneyin."

#: ../src/generic/tipdlg.cpp:201
msgid "Tip of the Day"
msgstr "Günün İpucu"

#: ../src/generic/tipdlg.cpp:140
msgid "Tips not available, sorry!"
msgstr "Maalesef herhangi bir ipucu yok!"

#: ../src/generic/prntdlgg.cpp:242
msgid "To:"
msgstr "Kime:"

#: ../src/richtext/richtextbuffer.cpp:8363
msgid "Too many EndStyle calls!"
msgstr "Çok fazla EndStyle çağrısı!"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:891
msgid "Tooltip"
msgstr "İpucu"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:892
msgid "TooltipText"
msgstr "İpucuMetni"

#: ../src/generic/prntdlgg.cpp:881
msgid "Top margin (mm):"
msgstr "Üst kenar boşluğu (mm):"

#: ../src/generic/aboutdlgg.cpp:79
msgid "Translations by "
msgstr "Çeviren "

#: ../src/generic/aboutdlgg.cpp:188
msgid "Translators"
msgstr "Çevirmenler"

#. TRANSLATORS: Name of Boolean true value
#: ../src/propgrid/propgrid.cpp:211
msgid "True"
msgstr "Doğru"

#: ../src/common/fs_mem.cpp:227
#, c-format
msgid "Trying to remove file '%s' from memory VFS, but it is not loaded!"
msgstr ""
"'%s' dosyası yüklü olmadığı halde VFS belleğinden silinmeye çalışılıyor!"

#: ../src/common/fmapbase.cpp:156
msgid "Turkish (ISO-8859-9)"
msgstr "Türkçe (ISO-8859-9)"

#: ../src/generic/filectrlg.cpp:426
msgid "Type"
msgstr "Tür"

#: ../src/richtext/richtextfontpage.cpp:151
#: ../src/richtext/richtextfontpage.cpp:153
msgid "Type a font name."
msgstr "Bir yazı türü adı yazın."

#: ../src/richtext/richtextfontpage.cpp:166
#: ../src/richtext/richtextfontpage.cpp:168
msgid "Type a size in points."
msgstr "Punto cinsinden bir boyut yazın."

#: ../src/msw/ole/automtn.cpp:676
#, c-format
msgid "Type mismatch in argument %u."
msgstr "%u argümanında tür uyuşmazlığı."

#: ../src/common/xtixml.cpp:356 ../src/common/xtixml.cpp:509
#: ../src/common/xtistrm.cpp:318
msgid "Type must have enum - long conversion"
msgstr "Tür enum - long çevrimini desteklemelidir"

#: ../src/propgrid/propgridiface.cpp:401
#, c-format
msgid ""
"Type operation \"%s\" failed: Property labeled \"%s\" is of type \"%s\", NOT "
"\"%s\"."
msgstr ""
"\"%s\" tür işlemi yapılamadı: Etiketlenen özellik \"%s\" \"%s\" türünde, \"%s"
"\" türünde DEĞİL."

#: ../src/common/paper.cpp:133
msgid "US Std Fanfold, 14 7/8 x 11 in"
msgstr "US Std Fanfold, 14 7/8 x 11 inç"

#: ../src/common/fmapbase.cpp:196
msgid "US-ASCII"
msgstr "US-ASCII"

#: ../src/unix/fswatcher_inotify.cpp:109
msgid "Unable to add inotify watch"
msgstr "inotify izlemesi eklenemedi"

#: ../src/unix/fswatcher_kqueue.cpp:136
msgid "Unable to add kqueue watch"
msgstr "kqueue izlemesi eklenemedi"

#: ../include/wx/msw/private/fswatcher.h:142
msgid "Unable to associate handle with I/O completion port"
msgstr "Giriş/Çıkış tamamlanma kapısı işleyici ile ilişkilendirilemedi"

#: ../include/wx/msw/private/fswatcher.h:125
msgid "Unable to close I/O completion port handle"
msgstr "Giriş/Çıkış tamamlanma kapısı işleyicisi kapatılamadı"

#: ../src/unix/fswatcher_inotify.cpp:97
msgid "Unable to close inotify instance"
msgstr "inotify kopyası kapatılamadı"

#: ../include/wx/unix/private/fswatcher_kqueue.h:74
#, c-format
msgid "Unable to close path '%s'"
msgstr "'%s' yolu kapatılamadı"

#: ../include/wx/msw/private/fswatcher.h:48
#, c-format
msgid "Unable to close the handle for '%s'"
msgstr "'%s' işleyicisi kapatılamadı"

#: ../include/wx/msw/private/fswatcher.h:273
msgid "Unable to create I/O completion port"
msgstr "Giriş/Çıkış tamamlanma kapısı oluşturulamadı"

#: ../src/msw/fswatcher.cpp:84
msgid "Unable to create IOCP worker thread"
msgstr "IOCP iş parçacığı oluşturulamadı"

#: ../src/unix/fswatcher_inotify.cpp:74
msgid "Unable to create inotify instance"
msgstr "inotify kopyası oluşturulamadı"

#: ../src/unix/fswatcher_kqueue.cpp:97
msgid "Unable to create kqueue instance"
msgstr "kqueue kopyası oluşturulamadı"

#: ../include/wx/msw/private/fswatcher.h:262
msgid "Unable to dequeue completion packet"
msgstr "Tamamlanma paketi kuyruktan çıkarılamadı"

#: ../src/unix/fswatcher_kqueue.cpp:185
msgid "Unable to get events from kqueue"
msgstr "Olaylar kqueue üzerinden alınamadı"

#: ../src/gtk/app.cpp:435
msgid "Unable to initialize GTK+, is DISPLAY set properly?"
msgstr "GTK+ başlatılamadı, DISPLAY düzgün ayarlanmış mı?"

#: ../include/wx/unix/private/fswatcher_kqueue.h:57
#, c-format
msgid "Unable to open path '%s'"
msgstr "'%s' yolu açılamadı"

#: ../src/html/htmlwin.cpp:583
#, c-format
msgid "Unable to open requested HTML document: %s"
msgstr "İstenen HTML belgesi açılamıyor: %s"

#: ../src/unix/sound.cpp:368
msgid "Unable to play sound asynchronously."
msgstr "Ses zaman eşlemesiz olarak çalınamıyor."

#: ../include/wx/msw/private/fswatcher.h:213
msgid "Unable to post completion status"
msgstr "Tamamlanma durumu gönderilemedi"

#: ../src/unix/fswatcher_inotify.cpp:556
msgid "Unable to read from inotify descriptor"
msgstr "inotify tanımlayıcısı okunamadı"

#: ../src/unix/fswatcher_inotify.cpp:141
#, c-format
msgid "Unable to remove inotify watch %i"
msgstr "%i inotify izlemesi kaldırılamadı"

#: ../src/unix/fswatcher_kqueue.cpp:153
msgid "Unable to remove kqueue watch"
msgstr "kqueue izlemesi kaldırılamadı"

#: ../src/msw/fswatcher.cpp:168
#, c-format
msgid "Unable to set up watch for '%s'"
msgstr "'%s' izlemesi kurulamadı"

#: ../src/msw/fswatcher.cpp:91
msgid "Unable to start IOCP worker thread"
msgstr "IOCP iş parçacığı başlatılamadı"

#: ../src/common/stockitem.cpp:201
msgid "Undelete"
msgstr "Silmeyi geri al"

#: ../src/common/stockitem.cpp:202
msgid "Underline"
msgstr "Altı çizili"

#. TRANSLATORS: Label of underlined font
#: ../src/richtext/richtextfontpage.cpp:359 ../src/osx/carbon/fontdlg.cpp:370
#: ../src/propgrid/advprops.cpp:690
msgid "Underlined"
msgstr "Altı çizili"

#: ../src/common/stockitem.cpp:265
msgid "Undo last action"
msgstr "Son işlemi geri al"

#: ../src/common/cmdline.cpp:1029
#, c-format
msgid "Unexpected characters following option '%s'."
msgstr "'%s' seçeneğinden sonra beklenmeyen karakterler."

#: ../src/unix/fswatcher_inotify.cpp:274
#, c-format
msgid "Unexpected event for \"%s\": no matching watch descriptor."
msgstr "\"%s\" için beklenmeyen etkinlik: uyan izleme belirteci yok."

#: ../src/common/cmdline.cpp:1195
#, c-format
msgid "Unexpected parameter '%s'"
msgstr "Beklenmeyen parametre '%s'"

#: ../include/wx/msw/private/fswatcher.h:148
msgid "Unexpectedly new I/O completion port was created"
msgstr "Beklenmedik şekilde yeni Giriş/Çıkış tamamlanma kapısı oluşturuldu"

#: ../src/msw/fswatcher.cpp:70
msgid "Ungraceful worker thread termination"
msgstr "Uygunsuz iş parçacığı sonlandırması"

#: ../src/richtext/richtextsymboldlg.cpp:459
#: ../src/richtext/richtextsymboldlg.cpp:460
#: ../src/richtext/richtextsymboldlg.cpp:461
msgid "Unicode"
msgstr "Unikod"

#: ../src/common/fmapbase.cpp:185 ../src/common/fmapbase.cpp:191
msgid "Unicode 16 bit (UTF-16)"
msgstr "Unikod 16 bit (UTF-16)"

#: ../src/common/fmapbase.cpp:190
msgid "Unicode 16 bit Big Endian (UTF-16BE)"
msgstr "Unikod 16 bit Big Endian (UTF-16BE)"

#: ../src/common/fmapbase.cpp:186
msgid "Unicode 16 bit Little Endian (UTF-16LE)"
msgstr "Unikod 16 bit Little Endian (UTF-16LE)"

#: ../src/common/fmapbase.cpp:187 ../src/common/fmapbase.cpp:193
msgid "Unicode 32 bit (UTF-32)"
msgstr "Unikod 32 bit (UTF-32)"

#: ../src/common/fmapbase.cpp:192
msgid "Unicode 32 bit Big Endian (UTF-32BE)"
msgstr "Unikod 32 bit Big Endian (UTF-32BE)"

#: ../src/common/fmapbase.cpp:188
msgid "Unicode 32 bit Little Endian (UTF-32LE)"
msgstr "Unikod 32 bit Little Endian (UTF-32LE)"

#: ../src/common/fmapbase.cpp:182
msgid "Unicode 7 bit (UTF-7)"
msgstr "7 bit Unikod (UTF-7)"

#: ../src/common/fmapbase.cpp:183
msgid "Unicode 8 bit (UTF-8)"
msgstr "8 bit Unikod (UTF-8)"

#: ../src/common/stockitem.cpp:204
msgid "Unindent"
msgstr "Girintiyi geri al"

#: ../src/richtext/richtextborderspage.cpp:360
#: ../src/richtext/richtextborderspage.cpp:362
msgid "Units for the bottom border width."
msgstr "Alt kenarlık genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:277
#: ../src/richtext/richtextmarginspage.cpp:279
msgid "Units for the bottom margin."
msgstr "Alt kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:528
#: ../src/richtext/richtextborderspage.cpp:530
msgid "Units for the bottom outline width."
msgstr "Alt taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:391
#: ../src/richtext/richtextmarginspage.cpp:393
msgid "Units for the bottom padding."
msgstr "Alt yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:664
#: ../src/richtext/richtextsizepage.cpp:666
msgid "Units for the bottom position."
msgstr "Alt konumun birimleri."

#: ../src/richtext/richtextborderspage.cpp:596
#: ../src/richtext/richtextborderspage.cpp:598
msgid "Units for the corner radius."
msgstr "Köşe yarıçapı birimi."

#: ../src/richtext/richtextborderspage.cpp:258
#: ../src/richtext/richtextborderspage.cpp:260
msgid "Units for the left border width."
msgstr "Sol sınır genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:204
#: ../src/richtext/richtextmarginspage.cpp:206
msgid "Units for the left margin."
msgstr "Sol kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:426
#: ../src/richtext/richtextborderspage.cpp:428
msgid "Units for the left outline width."
msgstr "Sol taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:318
#: ../src/richtext/richtextmarginspage.cpp:320
msgid "Units for the left padding."
msgstr "Sol yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:559
#: ../src/richtext/richtextsizepage.cpp:561
msgid "Units for the left position."
msgstr "Sol konumun birimleri."

#: ../src/richtext/richtextsizepage.cpp:485
#: ../src/richtext/richtextsizepage.cpp:487
msgid "Units for the maximum object height."
msgstr "En fazla nesne yüksekliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:458
#: ../src/richtext/richtextsizepage.cpp:460
msgid "Units for the maximum object width."
msgstr "En fazla nesne genişliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:431
#: ../src/richtext/richtextsizepage.cpp:433
msgid "Units for the minimum object height."
msgstr "En az nesne yüksekliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:404
#: ../src/richtext/richtextsizepage.cpp:406
msgid "Units for the minimum object width."
msgstr "En az nesne genişliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:377
#: ../src/richtext/richtextsizepage.cpp:379
msgid "Units for the object height."
msgstr "Nesne yüksekliğinin birimleri."

#: ../src/richtext/richtextsizepage.cpp:343
#: ../src/richtext/richtextsizepage.cpp:345
msgid "Units for the object width."
msgstr "Nesne genişliğinin birimleri."

#: ../src/richtext/richtextborderspage.cpp:292
#: ../src/richtext/richtextborderspage.cpp:294
msgid "Units for the right border width."
msgstr "Sağ sınır genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:229
#: ../src/richtext/richtextmarginspage.cpp:231
msgid "Units for the right margin."
msgstr "Sağ kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:460
#: ../src/richtext/richtextborderspage.cpp:462
msgid "Units for the right outline width."
msgstr "Sağ taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:343
#: ../src/richtext/richtextmarginspage.cpp:345
msgid "Units for the right padding."
msgstr "Sağ yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:629
#: ../src/richtext/richtextsizepage.cpp:631
msgid "Units for the right position."
msgstr "Sağ konumun birimleri."

#: ../src/richtext/richtextborderspage.cpp:326
#: ../src/richtext/richtextborderspage.cpp:328
msgid "Units for the top border width."
msgstr "Üst kenarlık genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:252
#: ../src/richtext/richtextmarginspage.cpp:254
msgid "Units for the top margin."
msgstr "Üst kenar boşluğunun birimleri."

#: ../src/richtext/richtextborderspage.cpp:494
#: ../src/richtext/richtextborderspage.cpp:496
msgid "Units for the top outline width."
msgstr "Üst taslak genişliğinin birimleri."

#: ../src/richtext/richtextmarginspage.cpp:366
#: ../src/richtext/richtextmarginspage.cpp:368
msgid "Units for the top padding."
msgstr "Üst yastıklamanın birimleri."

#: ../src/richtext/richtextsizepage.cpp:594
#: ../src/richtext/richtextsizepage.cpp:596
msgid "Units for the top position."
msgstr "Üst konumun birimleri."

#: ../src/richtext/richtextbackgroundpage.cpp:230
#: ../src/richtext/richtextbackgroundpage.cpp:232
#: ../src/richtext/richtextbackgroundpage.cpp:253
#: ../src/richtext/richtextbackgroundpage.cpp:255
#: ../src/richtext/richtextbackgroundpage.cpp:293
#: ../src/richtext/richtextbackgroundpage.cpp:295
#: ../src/richtext/richtextbackgroundpage.cpp:320
#: ../src/richtext/richtextbackgroundpage.cpp:322
msgid "Units for this value."
msgstr "Bu değerin birimleri."

#: ../src/msw/dde.cpp:1174
#, c-format
msgid "Unknown DDE error %08x"
msgstr "Bilinmeyen DDE hatası %08x"

#: ../src/common/xtistrm.cpp:410
msgid "Unknown Object passed to GetObjectClassInfo"
msgstr "GetObjectClassInfo işlevi bilinmeyen nesne ile çağrıldı"

#: ../src/common/imagpng.cpp:366
#, c-format
msgid "Unknown PNG resolution unit %d"
msgstr "Bilinmeyen PNG çözünürlük birimi %d"

#: ../src/common/xtixml.cpp:327
#, c-format
msgid "Unknown Property %s"
msgstr "Bilinmeyen Özellik %s"

#: ../src/common/imagtiff.cpp:529
#, c-format
msgid "Unknown TIFF resolution unit %d ignored"
msgstr "Bilinmeyen TIFF %d çözünürlük birimi yok sayıldı"

#: ../src/unix/dlunix.cpp:160
msgid "Unknown dynamic library error"
msgstr "Blinmeyen devingen kitaplık sorunu"

#: ../src/common/fmapbase.cpp:810
#, c-format
msgid "Unknown encoding (%d)"
msgstr "Bilinmeyen kodlama (%d)"

#: ../src/msw/ole/automtn.cpp:688
#, c-format
msgid "Unknown error %08x"
msgstr "Bilinmeyen sorun %08x"

#: ../src/msw/ole/automtn.cpp:647
msgid "Unknown exception"
msgstr "Bilinmeyen istisna"

#: ../src/common/image.cpp:2839
msgid "Unknown image data format."
msgstr "Bilinmeyen görsel veri biçimi."

#: ../src/common/cmdline.cpp:914
#, c-format
msgid "Unknown long option '%s'"
msgstr "Blinmeyen long seçeneği '%s'"

#: ../src/msw/ole/automtn.cpp:631
msgid "Unknown name or named argument."
msgstr "Bilinmeyen ad ya da adlandırılmış argüman."

#: ../src/common/cmdline.cpp:929 ../src/common/cmdline.cpp:951
#, c-format
msgid "Unknown option '%s'"
msgstr "Bilinmeyen seçenek '%s'"

#: ../src/common/mimecmn.cpp:225
#, c-format
msgid "Unmatched '{' in an entry for mime type %s."
msgstr "%s MIME türü kaydına uymayan '{'."

#: ../src/common/cmdproc.cpp:262 ../src/common/cmdproc.cpp:288
#: ../src/common/cmdproc.cpp:308
msgid "Unnamed command"
msgstr "Adsız komut"

#. TRANSLATORS: Text  displayed for unspecified value
#: ../src/propgrid/propgrid.cpp:413
msgid "Unspecified"
msgstr "Belirtilmemiş"

#: ../src/msw/clipbrd.cpp:311
msgid "Unsupported clipboard format."
msgstr "Desteklenmeyen pano biçimi."

#: ../src/common/appcmn.cpp:256
#, c-format
msgid "Unsupported theme '%s'."
msgstr "Desteklenmeyen tema '%s'."

#. TRANSLATORS: Name of keyboard key
#: ../src/generic/fdrepdlg.cpp:152 ../src/common/stockitem.cpp:205
#: ../src/common/accelcmn.cpp:63
msgid "Up"
msgstr "Yukarı"

#: ../src/richtext/richtextliststylepage.cpp:483
#: ../src/richtext/richtextbulletspage.cpp:275
msgid "Upper case letters"
msgstr "Büyük harfler"

#: ../src/richtext/richtextliststylepage.cpp:485
#: ../src/richtext/richtextbulletspage.cpp:277
msgid "Upper case roman numerals"
msgstr "Büyük harf romen rakamları"

#: ../src/common/cmdline.cpp:1326
#, c-format
msgid "Usage: %s"
msgstr "Kullanım: %s"

#: ../src/richtext/richtextbackgroundpage.cpp:194
msgid "Use &shadow"
msgstr "&Gölge kullanılsın"

#: ../src/richtext/richtextindentspage.cpp:169
#: ../src/richtext/richtextindentspage.cpp:171
#: ../src/richtext/richtextliststylepage.cpp:358
#: ../src/richtext/richtextliststylepage.cpp:360
msgid "Use the current alignment setting."
msgstr "Geçerli hizalama ayarları kullanılsın."

#: ../src/common/valtext.cpp:179
msgid "Validation conflict"
msgstr "Doğrulama çelişkisi"

#: ../src/propgrid/manager.cpp:238
msgid "Value"
msgstr "Değer"

#: ../src/propgrid/props.cpp:386 ../src/propgrid/props.cpp:500
#, c-format
msgid "Value must be %s or higher."
msgstr "Değer %s ya da daha büyük olmalı."

#: ../src/propgrid/props.cpp:417 ../src/propgrid/props.cpp:531
#, c-format
msgid "Value must be %s or less."
msgstr "Değer %s ya da daha küçük olmalı."

#: ../src/propgrid/props.cpp:393 ../src/propgrid/props.cpp:424
#: ../src/propgrid/props.cpp:507 ../src/propgrid/props.cpp:538
#, c-format
msgid "Value must be between %s and %s."
msgstr "Değer %s ile %s arasında olmalı."

#: ../src/generic/aboutdlgg.cpp:128
msgid "Version "
msgstr "Sürüm "

#: ../src/richtext/richtextsizepage.cpp:291
#: ../src/richtext/richtextsizepage.cpp:293
msgid "Vertical alignment."
msgstr "Dikey hizalama."

#: ../src/generic/filedlgg.cpp:202
msgid "View files as a detailed view"
msgstr "Dosyalar ayrıntılı görünümde görüntülensin"

#: ../src/generic/filedlgg.cpp:200
msgid "View files as a list view"
msgstr "Dosyalar liste görünümünde görüntülensin"

#: ../src/common/docview.cpp:1970
msgid "Views"
msgstr "Görünümler"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1777
msgid "Wait"
msgstr "Bekleme"

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1779
msgid "Wait Arrow"
msgstr "Bekleme Oku"

#: ../src/unix/epolldispatcher.cpp:213
#, c-format
msgid "Waiting for IO on epoll descriptor %d failed"
msgstr "%d epoll tanımlayıcısı üstündeki GÇ beklemesi başarısız"

#: ../src/common/log.cpp:223
msgid "Warning: "
msgstr "Uyarı: "

#. TRANSLATORS: System cursor name
#: ../src/propgrid/advprops.cpp:1778
msgid "Watch"
msgstr "İzleme"

#. TRANSLATORS: Label of font weight
#: ../src/propgrid/advprops.cpp:685
msgid "Weight"
msgstr "Yoğunluk"

#: ../src/common/fmapbase.cpp:148
msgid "Western European (ISO-8859-1)"
msgstr "Batı Avrupa (ISO-8859-1)"

#: ../src/common/fmapbase.cpp:162
msgid "Western European with Euro (ISO-8859-15)"
msgstr "Batı Avrupa (Euro) (ISO-8859-15)"

#: ../src/generic/fontdlgg.cpp:446 ../src/generic/fontdlgg.cpp:448
msgid "Whether the font is underlined."
msgstr "Yazı türünün altı çizili olup olmadığı."

#: ../src/propgrid/advprops.cpp:1611
msgid "White"
msgstr "Beyaz"

#: ../src/html/helpwnd.cpp:534
msgid "Whole words only"
msgstr "Yalnız tam kelimeler"

#: ../src/univ/themes/win32.cpp:1102
msgid "Win32 theme"
msgstr "Win32 teması"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:893
msgid "Window"
msgstr "Pencere"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:894
msgid "WindowFrame"
msgstr "PencereÇerçevesi"

#. TRANSLATORS: Keyword of system colour
#: ../src/propgrid/advprops.cpp:895
msgid "WindowText"
msgstr "PencereMetni"

#: ../src/common/fmapbase.cpp:177
msgid "Windows Arabic (CP 1256)"
msgstr "Windows Arapça (CP 1256)"

#: ../src/common/fmapbase.cpp:178
msgid "Windows Baltic (CP 1257)"
msgstr "Windows Baltık (CP 1257)"

#: ../src/common/fmapbase.cpp:171
msgid "Windows Central European (CP 1250)"
msgstr "Windows Orta Avrupa (CP 1250)"

#: ../src/common/fmapbase.cpp:168
msgid "Windows Chinese Simplified (CP 936) or GB-2312"
msgstr "Windows Basitleştirilmiş Çince (CP 936) ya da GB-2312"

#: ../src/common/fmapbase.cpp:170
msgid "Windows Chinese Traditional (CP 950) or Big-5"
msgstr "Windows Geleneksel Çince (CP 950) ya da Big-5"

#: ../src/common/fmapbase.cpp:172
msgid "Windows Cyrillic (CP 1251)"
msgstr "Windows Kiril (CP 1251)"

#: ../src/common/fmapbase.cpp:174
msgid "Windows Greek (CP 1253)"
msgstr "Windows Yunanca (CP 1253)"

#: ../src/common/fmapbase.cpp:176
msgid "Windows Hebrew (CP 1255)"
msgstr "Windows İbranice (CP 1255)"

#: ../src/common/fmapbase.cpp:167
msgid "Windows Japanese (CP 932) or Shift-JIS"
msgstr "Windows Japonca (CP 932) ya da Shift-JIS"

#: ../src/common/fmapbase.cpp:180
msgid "Windows Johab (CP 1361)"
msgstr "Windows Johab (CP 1361)"

#: ../src/common/fmapbase.cpp:169
msgid "Windows Korean (CP 949)"
msgstr "Windows Korece (CP 949)"

#: ../src/common/fmapbase.cpp:166
msgid "Windows Thai (CP 874)"
msgstr "Windows Tai (CP 874)"

#: ../src/common/fmapbase.cpp:175
msgid "Windows Turkish (CP 1254)"
msgstr "Windows Türkçe (CP 1254)"

#: ../src/common/fmapbase.cpp:179
msgid "Windows Vietnamese (CP 1258)"
msgstr "Windows Vietnamca (CP 1258)"

#: ../src/common/fmapbase.cpp:173
msgid "Windows Western European (CP 1252)"
msgstr "Windows Batı Avrupa (CP 1252)"

#: ../src/common/fmapbase.cpp:181
msgid "Windows/DOS OEM (CP 437)"
msgstr "Windows/DOS OEM (CP 437)"

#: ../src/common/fmapbase.cpp:165
msgid "Windows/DOS OEM Cyrillic (CP 866)"
msgstr "Windows/DOS OEM Kiril (CP 866)"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:111
msgid "Windows_Left"
msgstr "Pencere_Sol"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:113
msgid "Windows_Menu"
msgstr "Pencere_Menü"

#. TRANSLATORS: Name of keyboard key
#: ../src/common/accelcmn.cpp:112
msgid "Windows_Right"
msgstr "Pencere_Sağ"

#: ../src/common/ffile.cpp:150
#, c-format
msgid "Write error on file '%s'"
msgstr "'%s' dosyasına yazma hatası"

#: ../src/xml/xml.cpp:914
#, c-format
msgid "XML parsing error: '%s' at line %d"
msgstr "XML işleme hatası: '%s' %d satırında"

#: ../src/common/xpmdecod.cpp:796
msgid "XPM: Malformed pixel data!"
msgstr "XPM: Bozuk piksel verisi!"

#: ../src/common/xpmdecod.cpp:705
#, c-format
msgid "XPM: incorrect colour description in line %d"
msgstr "XPM: %d satırında hatalı renk açıklaması"

#: ../src/common/xpmdecod.cpp:680
msgid "XPM: incorrect header format!"
msgstr "XPM: hatalı üst bilgi biçimi!"

#: ../src/common/xpmdecod.cpp:716 ../src/common/xpmdecod.cpp:725
#, c-format
msgid "XPM: malformed colour definition '%s' at line %d!"
msgstr "XPM: '%s' bozuk renk tanımı %d satırında!"

#: ../src/common/xpmdecod.cpp:755
msgid "XPM: no colors left to use for mask!"
msgstr "XPM: maske için kullanılacak renk kalmadı!"

#: ../src/common/xpmdecod.cpp:782
#, c-format
msgid "XPM: truncated image data at line %d!"
msgstr "XPM: %d satırında budanmış görüntü verisi!"

#: ../src/propgrid/advprops.cpp:1610
msgid "Yellow"
msgstr "Sarı"

#: ../include/wx/msgdlg.h:276 ../src/common/stockitem.cpp:206
#: ../src/motif/msgdlg.cpp:196
msgid "Yes"
msgstr "Evet"

#: ../src/osx/carbon/overlay.cpp:155
msgid "You cannot Clear an overlay that is not inited"
msgstr "Hazırlanmamış bir örtüşmeyi temizleyemezsiniz"

#: ../src/osx/carbon/overlay.cpp:107 ../src/dfb/overlay.cpp:61
msgid "You cannot Init an overlay twice"
msgstr "Bir örtüşmeyi iki kez hazırlayamazsınız"

#: ../src/generic/dirdlgg.cpp:287
msgid "You cannot add a new directory to this section."
msgstr "Bu bölüme yeni bir klasör ekleyemezsiniz."

#: ../src/propgrid/propgrid.cpp:3299
msgid "You have entered invalid value. Press ESC to cancel editing."
msgstr ""
"Geçersiz bir değer yazdınız, düzenlemeyi iptal etmek için ESC tuşuna basın."

#: ../src/common/stockitem.cpp:209
msgid "Zoom &In"
msgstr "&Büyüt"

#: ../src/common/stockitem.cpp:210
msgid "Zoom &Out"
msgstr "&Küçült"

#: ../src/common/stockitem.cpp:209 ../src/common/prntbase.cpp:1594
msgid "Zoom In"
msgstr "Büyüt"

#: ../src/common/stockitem.cpp:210 ../src/common/prntbase.cpp:1580
msgid "Zoom Out"
msgstr "Küçült"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to &Fit"
msgstr "&Sığdır"

#: ../src/common/stockitem.cpp:208
msgid "Zoom to Fit"
msgstr "Sığdır"

#: ../src/msw/dde.cpp:1141
msgid "a DDEML application has created a prolonged race condition."
msgstr "bir DDEML uygulaması uzun koşu durumu oluşturdu."

#: ../src/msw/dde.cpp:1129
msgid ""
"a DDEML function was called without first calling the DdeInitialize "
"function,\n"
"or an invalid instance identifier\n"
"was passed to a DDEML function."
msgstr ""
"DDEML işlevi DdeInitialize işlevi çağrılmadan önce çağrıldı,\n"
"ya da DDEML işlevine geçersiz bir \n"
"örnek tanımlayıcısı gönderildi."

#: ../src/msw/dde.cpp:1147
msgid "a client's attempt to establish a conversation has failed."
msgstr "bir istemcinin konuşma başlatma denemesi başarısız oldu."

#: ../src/msw/dde.cpp:1144
msgid "a memory allocation failed."
msgstr "bellek ayrılamadı."

#: ../src/msw/dde.cpp:1138
msgid "a parameter failed to be validated by the DDEML."
msgstr "parametre DDEML tarafından doğrulanamadı."

#: ../src/msw/dde.cpp:1120
msgid "a request for a synchronous advise transaction has timed out."
msgstr "eşzamanlı danışma işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1126
msgid "a request for a synchronous data transaction has timed out."
msgstr "eşzamanlı veri işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1135
msgid "a request for a synchronous execute transaction has timed out."
msgstr "eşzamanlı çalıştırma işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1153
msgid "a request for a synchronous poke transaction has timed out."
msgstr "eşzamanlı itme işlemi isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1168
msgid "a request to end an advise transaction has timed out."
msgstr "danışma işlemi bitirme isteği zaman aşımına uğradı."

#: ../src/msw/dde.cpp:1162
msgid ""
"a server-side transaction was attempted on a conversation\n"
"that was terminated by the client, or the server\n"
"terminated before completing a transaction."
msgstr ""
"istemci tarafından sonlandırılmış bir görüşme üstünde\n"
"sunucu tarafında bir işlem denendi, ya da sunucu\n"
"işlem tamamlanmadan sonlandırıldı."

#: ../src/msw/dde.cpp:1150
msgid "a transaction failed."
msgstr "işlem tamamlanamadı.."

#: ../src/common/accelcmn.cpp:189
msgid "alt"
msgstr "alt"

#: ../src/msw/dde.cpp:1132
msgid ""
"an application initialized as APPCLASS_MONITOR has\n"
"attempted to perform a DDE transaction,\n"
"or an application initialized as APPCMD_CLIENTONLY has \n"
"attempted to perform server transactions."
msgstr ""
"APPCLASS_MONITOR olarak başlatılmış bir uygulama\n"
"DDE hareketi gerçekleştirmeyi denedi,\n"
"ya da APPCMD_CLIENTONLY olarak başlatılmış bir uygulama\n"
"sunucu hareketi gerçekleştirmeyi denedi."

#: ../src/msw/dde.cpp:1156
msgid "an internal call to the PostMessage function has failed. "
msgstr "PostMessage işlevine içsel çağrı yapılamadı. "

#: ../src/msw/dde.cpp:1165
msgid "an internal error has occurred in the DDEML."
msgstr "DDEML içsel hatası."

#: ../src/msw/dde.cpp:1171
msgid ""
"an invalid transaction identifier was passed to a DDEML function.\n"
"Once the application has returned from an XTYP_XACT_COMPLETE callback,\n"
"the transaction identifier for that callback is no longer valid."
msgstr ""
"DDEML işlevine geçersiz hareket kimliği gönderilmiş.\n"
"Uygulama XTYP_XACT_COMPLETE çağrısından döndüğünde\n"
"bu çağrının hareket kimliği geçersiz olacak."

#: ../src/common/zipstrm.cpp:1483
msgid "assuming this is a multi-part zip concatenated"
msgstr "bunun çok parçalı birleştirilmiş bir zip olduğu varsayılıyor"

#: ../src/common/fileconf.cpp:1847
#, c-format
msgid "attempt to change immutable key '%s' ignored."
msgstr "'%s' değişmez anahtarını değiştirme denemesi yok sayıldı."

#: ../src/html/chm.cpp:329
msgid "bad arguments to library function"
msgstr "kitaplık işlevi için hatalı değişkenler"

#: ../src/html/chm.cpp:341
msgid "bad signature"
msgstr "imza kötü"

#: ../src/common/zipstrm.cpp:1918
msgid "bad zipfile offset to entry"
msgstr "kayıt için hatalı zip dosyası konumu"

#: ../src/common/ftp.cpp:403
msgid "binary"
msgstr "ikili"

#: ../src/common/fontcmn.cpp:996
msgid "bold"
msgstr "koyu"

#: ../src/msw/utils.cpp:1144
#, c-format
msgid "build %lu"
msgstr "yapım %lu"

#: ../src/common/ffile.cpp:75
#, c-format
msgid "can't close file '%s'"
msgstr "'%s' dosyası kapatılamıyor"

#: ../src/common/file.cpp:245
#, c-format
msgid "can't close file descriptor %d"
msgstr "%d dosya tanımlayıcısı kapatılamıyor"

#: ../src/common/file.cpp:586
#, c-format
msgid "can't commit changes to file '%s'"
msgstr "'%s' dosyasındaki değişiklikler işlenemiyor"

#: ../src/common/file.cpp:178
#, c-format
msgid "can't create file '%s'"
msgstr "'%s' dosyası oluşturulamıyor"

#: ../src/common/fileconf.cpp:1141
#, c-format
msgid "can't delete user configuration file '%s'"
msgstr "kullanıcı yapılandırma dosyası '%s' silinemiyor"

#: ../src/common/file.cpp:495
#, c-format
msgid "can't determine if the end of file is reached on descriptor %d"
msgstr ""
"%d tanımlayıcısı üstündeki dosyanın sonuna ulaşılıp ulaşılamadığı "
"belirlenemiyor"

#: ../src/common/zipstrm.cpp:1692
msgid "can't find central directory in zip"
msgstr "zip içinde merkez klasör bulunamıyor"

#: ../src/common/file.cpp:465
#, c-format
msgid "can't find length of file on file descriptor %d"
msgstr "%d tanımlayıcısı üstündeki dosyanın uzunluğu bulunamıyor"

#: ../src/msw/utils.cpp:341
msgid "can't find user's HOME, using current directory."
msgstr "kullanıcının klasörü bulunamadığından geçerli klasör kullanılıyor."

#: ../src/common/file.cpp:366
#, c-format
msgid "can't flush file descriptor %d"
msgstr "%d dosya tanımlayıcısı temizlenemiyor"

#: ../src/common/file.cpp:422
#, c-format
msgid "can't get seek position on file descriptor %d"
msgstr "%d dosya tanımlayıcısı üstündeki arama konumu alınamıyor"

#: ../src/common/fontmap.cpp:325
msgid "can't load any font, aborting"
msgstr "herhangi bir yazı türü yüklenemedi, vazgeçiliyor"

#: ../src/common/file.cpp:231 ../src/common/ffile.cpp:59
#, c-format
msgid "can't open file '%s'"
msgstr "'%s' dosyası açılamıyor"

#: ../src/common/fileconf.cpp:320
#, c-format
msgid "can't open global configuration file '%s'."
msgstr "'%s' genel ayar dosyası açılamıyor"

#: ../src/common/fileconf.cpp:336
#, c-format
msgid "can't open user configuration file '%s'."
msgstr "'%s' kullanıcı ayar dosyası açılamıyor"

#: ../src/common/fileconf.cpp:986
msgid "can't open user configuration file."
msgstr "kullanıcı ayar dosyası açılamıyor."

#: ../src/common/zipstrm.cpp:579
msgid "can't re-initialize zlib deflate stream"
msgstr "zlib ayıklama akışı yeniden başlatılamadı"

#: ../src/common/zipstrm.cpp:604
msgid "can't re-initialize zlib inflate stream"
msgstr "zlib sıkıştırma akışı yeniden başlatılamadı"

#: ../src/common/file.cpp:304
#, c-format
msgid "can't read from file descriptor %d"
msgstr "%d dosya tanımlayıcısından okunamıyor"

#: ../src/common/file.cpp:581
#, c-format
msgid "can't remove file '%s'"
msgstr "'%s' dosyası silinemedi"

#: ../src/common/file.cpp:598
#, c-format
msgid "can't remove temporary file '%s'"
msgstr "'%s' geçici dosyası silinemedi"

#: ../src/common/file.cpp:408
#, c-format
msgid "can't seek on file descriptor %d"
msgstr "%d dosya tanımlayıcısı üzerinde arama yapılamıyor"

#: ../src/common/textfile.cpp:273
#, c-format
msgid "can't write buffer '%s' to disk."
msgstr "'%s' ara belleği diske yazılamadı."

#: ../src/common/file.cpp:323
#, c-format
msgid "can't write to file descriptor %d"
msgstr "%d dosya tanımlayıcısına yazılamıyor"

#: ../src/common/fileconf.cpp:1000
msgid "can't write user configuration file."
msgstr "kullanıcı ayar dosyası yazılamadı."

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:482 ../src/generic/datavgen.cpp:1261
msgid "checked"
msgstr "doğrulandı"

#: ../src/html/chm.cpp:345
msgid "checksum error"
msgstr "sağlama sorunu"

#: ../src/common/tarstrm.cpp:820
msgid "checksum failure reading tar header block"
msgstr "tar başlık bloğu okunurken sağlama sorunu"

#: ../src/richtext/richtextbackgroundpage.cpp:226
#: ../src/richtext/richtextbackgroundpage.cpp:249
#: ../src/richtext/richtextbackgroundpage.cpp:289
#: ../src/richtext/richtextbackgroundpage.cpp:316
#: ../src/richtext/richtextborderspage.cpp:254
#: ../src/richtext/richtextborderspage.cpp:288
#: ../src/richtext/richtextborderspage.cpp:322
#: ../src/richtext/richtextborderspage.cpp:356
#: ../src/richtext/richtextborderspage.cpp:422
#: ../src/richtext/richtextborderspage.cpp:456
#: ../src/richtext/richtextborderspage.cpp:490
#: ../src/richtext/richtextborderspage.cpp:524
#: ../src/richtext/richtextborderspage.cpp:592
#: ../src/richtext/richtextmarginspage.cpp:201
#: ../src/richtext/richtextmarginspage.cpp:226
#: ../src/richtext/richtextmarginspage.cpp:249
#: ../src/richtext/richtextmarginspage.cpp:274
#: ../src/richtext/richtextmarginspage.cpp:315
#: ../src/richtext/richtextmarginspage.cpp:340
#: ../src/richtext/richtextmarginspage.cpp:363
#: ../src/richtext/richtextmarginspage.cpp:388
#: ../src/richtext/richtextsizepage.cpp:339
#: ../src/richtext/richtextsizepage.cpp:373
#: ../src/richtext/richtextsizepage.cpp:400
#: ../src/richtext/richtextsizepage.cpp:427
#: ../src/richtext/richtextsizepage.cpp:454
#: ../src/richtext/richtextsizepage.cpp:481
#: ../src/richtext/richtextsizepage.cpp:555
#: ../src/richtext/richtextsizepage.cpp:590
#: ../src/richtext/richtextsizepage.cpp:625
#: ../src/richtext/richtextsizepage.cpp:660
msgid "cm"
msgstr "cm"

#: ../src/html/chm.cpp:347
msgid "compression error"
msgstr "sıkıştırma sorunu"

#: ../src/common/regex.cpp:236
msgid "conversion to 8-bit encoding failed"
msgstr "8-bit kodlama dönüşümü yapılamadı"

#: ../src/common/accelcmn.cpp:187
msgid "ctrl"
msgstr "ctrl"

#: ../src/common/cmdline.cpp:1500
msgid "date"
msgstr "tarih"

#: ../src/html/chm.cpp:349
msgid "decompression error"
msgstr "ayıklama sorunu"

#: ../src/common/cmdline.cpp:1496
msgid "double"
msgstr "çift"

#: ../src/common/debugrpt.cpp:538
msgid "dump of the process state (binary)"
msgstr "işlem durum dökümü (ikili)"

#: ../src/common/datetimefmt.cpp:1969
msgid "eighteenth"
msgstr "onsekizinci"

#: ../src/common/datetimefmt.cpp:1959
msgid "eighth"
msgstr "sekizinci"

#: ../src/common/datetimefmt.cpp:1962
msgid "eleventh"
msgstr "onbirinci"

#: ../src/common/fileconf.cpp:1833
#, c-format
msgid "entry '%s' appears more than once in group '%s'"
msgstr "'%s' kaydı '%s' grubunda birden çok kez var"

#: ../src/html/chm.cpp:343
msgid "error in data format"
msgstr "veri biçimi sorunu"

#: ../src/html/chm.cpp:331
msgid "error opening file"
msgstr "dosya açma sorunu"

#: ../src/common/zipstrm.cpp:1778
msgid "error reading zip central directory"
msgstr "zip merkez klasörünü okuma sorunu"

#: ../src/common/zipstrm.cpp:1870
msgid "error reading zip local header"
msgstr "zip yerel başlığını okuma sorunu"

#: ../src/common/zipstrm.cpp:2531
#, c-format
msgid "error writing zip entry '%s': bad crc or length"
msgstr "'%s' zip kaydı yazma sorunu: hatalı CRC ya da uzunluk"

#: ../src/common/ffile.cpp:188
#, c-format
msgid "failed to flush the file '%s'"
msgstr "'%s' dosyası temizlenemedi"

#. TRANSLATORS: Name of Boolean false value
#: ../src/generic/datavgen.cpp:1030
msgid "false"
msgstr "yanlış"

#: ../src/common/datetimefmt.cpp:1966
msgid "fifteenth"
msgstr "onbeşinci"

#: ../src/common/datetimefmt.cpp:1956
msgid "fifth"
msgstr "beşinci"

#: ../src/common/fileconf.cpp:579
#, c-format
msgid "file '%s', line %zu: '%s' ignored after group header."
msgstr "dosya '%s', satır %zu: '%s' grup üst bilgisinden sonra yok sayıldı."

#: ../src/common/fileconf.cpp:608
#, c-format
msgid "file '%s', line %zu: '=' expected."
msgstr "dosya '%s', satır %zu: '=' bekleniyor."

#: ../src/common/fileconf.cpp:631
#, c-format
msgid "file '%s', line %zu: key '%s' was first found at line %d."
msgstr "dosya '%s', satır %zu: anahtar '%s' ilk olarak %d satırında bulundu."

#: ../src/common/fileconf.cpp:621
#, c-format
msgid "file '%s', line %zu: value for immutable key '%s' ignored."
msgstr "dosya '%s', satır %zu: '%s' değişmez anahtarı için değer yok sayıldı."

#: ../src/common/fileconf.cpp:543
#, c-format
msgid "file '%s': unexpected character %c at line %zu."
msgstr "dosya '%s': beklenmedik karakter %c, satır: %zu."

#: ../src/richtext/richtextbuffer.cpp:8738
msgid "files"
msgstr "dosyalar"

#: ../src/common/datetimefmt.cpp:1952
msgid "first"
msgstr "birinci"

#: ../src/html/helpwnd.cpp:1252
msgid "font size"
msgstr "yazı türü boyutu"

#: ../src/common/datetimefmt.cpp:1965
msgid "fourteenth"
msgstr "ondördüncü"

#: ../src/common/datetimefmt.cpp:1955
msgid "fourth"
msgstr "dördüncü"

#: ../src/common/appbase.cpp:783
msgid "generate verbose log messages"
msgstr "ayrıntılı günlük iletileri oluşturulsun"

#: ../src/richtext/richtextbuffer.cpp:13138
#: ../src/richtext/richtextbuffer.cpp:13248
msgid "image"
msgstr "görsel"

#: ../src/common/tarstrm.cpp:796
msgid "incomplete header block in tar"
msgstr "tar başlık bloğu eksik"

#: ../src/common/xtixml.cpp:489
msgid "incorrect event handler string, missing dot"
msgstr "hatalı olay işleyici dizgesi, nokta eksik"

#: ../src/common/tarstrm.cpp:1381
msgid "incorrect size given for tar entry"
msgstr "tar kaydının boyutu hatalı verilmiş"

#: ../src/common/tarstrm.cpp:993
msgid "invalid data in extended tar header"
msgstr "ek tar başlığında hatalı veri"

#: ../src/generic/logg.cpp:1030
msgid "invalid message box return value"
msgstr "geçersiz ileti penceresi sonuç değeri"

#: ../src/common/zipstrm.cpp:1647
msgid "invalid zip file"
msgstr "geçersiz zip dosyası"

#: ../src/common/fontcmn.cpp:1001
msgid "italic"
msgstr "yatık"

#: ../src/common/fontcmn.cpp:991
msgid "light"
msgstr "açık"

#: ../src/common/intl.cpp:303
#, c-format
msgid "locale '%s' cannot be set."
msgstr "'%s' yerel ayarları seçilemiyor."

#: ../src/common/datetimefmt.cpp:2125
msgid "midnight"
msgstr "gece yarısı"

#: ../src/common/datetimefmt.cpp:1970
msgid "nineteenth"
msgstr "ondokuzuncu"

#: ../src/common/datetimefmt.cpp:1960
msgid "ninth"
msgstr "dokuzuncu"

#: ../src/msw/dde.cpp:1116
msgid "no DDE error."
msgstr "DDE bulunamadı hatası."

#: ../src/html/chm.cpp:327
msgid "no error"
msgstr "hata yok"

#: ../src/dfb/fontmgr.cpp:174
#, c-format
msgid "no fonts found in %s, using builtin font"
msgstr "%s içinde yazı türü yok, içsel yazı türü kullanılıyor"

#: ../src/html/helpdata.cpp:657
msgid "noname"
msgstr "adsız"

#: ../src/common/datetimefmt.cpp:2124
msgid "noon"
msgstr "öğlen"

#: ../src/richtext/richtextstyles.cpp:779
msgid "normal"
msgstr "normal"

#: ../src/common/cmdline.cpp:1492
msgid "num"
msgstr "tamsayı"

#: ../src/common/xtixml.cpp:259
msgid "objects cannot have XML Text Nodes"
msgstr "nesnelerin XML Metin Düğümleri olamaz"

#: ../src/html/chm.cpp:339
msgid "out of memory"
msgstr "bellek yetersiz"

#: ../src/common/debugrpt.cpp:514
msgid "process context description"
msgstr "işlem bağlamı tanımı"

#: ../src/richtext/richtextbackgroundpage.cpp:227
#: ../src/richtext/richtextbackgroundpage.cpp:250
#: ../src/richtext/richtextbackgroundpage.cpp:290
#: ../src/richtext/richtextbackgroundpage.cpp:317
#: ../src/richtext/richtextfontpage.cpp:177
#: ../src/richtext/richtextfontpage.cpp:180
#: ../src/richtext/richtextborderspage.cpp:255
#: ../src/richtext/richtextborderspage.cpp:289
#: ../src/richtext/richtextborderspage.cpp:323
#: ../src/richtext/richtextborderspage.cpp:357
#: ../src/richtext/richtextborderspage.cpp:423
#: ../src/richtext/richtextborderspage.cpp:457
#: ../src/richtext/richtextborderspage.cpp:491
#: ../src/richtext/richtextborderspage.cpp:525
#: ../src/richtext/richtextborderspage.cpp:593
msgid "pt"
msgstr "punto"

#: ../src/richtext/richtextbackgroundpage.cpp:225
#: ../src/richtext/richtextbackgroundpage.cpp:228
#: ../src/richtext/richtextbackgroundpage.cpp:229
#: ../src/richtext/richtextbackgroundpage.cpp:248
#: ../src/richtext/richtextbackgroundpage.cpp:251
#: ../src/richtext/richtextbackgroundpage.cpp:252
#: ../src/richtext/richtextbackgroundpage.cpp:288
#: ../src/richtext/richtextbackgroundpage.cpp:291
#: ../src/richtext/richtextbackgroundpage.cpp:292
#: ../src/richtext/richtextbackgroundpage.cpp:315
#: ../src/richtext/richtextbackgroundpage.cpp:318
#: ../src/richtext/richtextbackgroundpage.cpp:319
#: ../src/richtext/richtextfontpage.cpp:178
#: ../src/richtext/richtextborderspage.cpp:253
#: ../src/richtext/richtextborderspage.cpp:256
#: ../src/richtext/richtextborderspage.cpp:257
#: ../src/richtext/richtextborderspage.cpp:287
#: ../src/richtext/richtextborderspage.cpp:290
#: ../src/richtext/richtextborderspage.cpp:291
#: ../src/richtext/richtextborderspage.cpp:321
#: ../src/richtext/richtextborderspage.cpp:324
#: ../src/richtext/richtextborderspage.cpp:325
#: ../src/richtext/richtextborderspage.cpp:355
#: ../src/richtext/richtextborderspage.cpp:358
#: ../src/richtext/richtextborderspage.cpp:359
#: ../src/richtext/richtextborderspage.cpp:421
#: ../src/richtext/richtextborderspage.cpp:424
#: ../src/richtext/richtextborderspage.cpp:425
#: ../src/richtext/richtextborderspage.cpp:455
#: ../src/richtext/richtextborderspage.cpp:458
#: ../src/richtext/richtextborderspage.cpp:459
#: ../src/richtext/richtextborderspage.cpp:489
#: ../src/richtext/richtextborderspage.cpp:492
#: ../src/richtext/richtextborderspage.cpp:493
#: ../src/richtext/richtextborderspage.cpp:523
#: ../src/richtext/richtextborderspage.cpp:526
#: ../src/richtext/richtextborderspage.cpp:527
#: ../src/richtext/richtextborderspage.cpp:591
#: ../src/richtext/richtextborderspage.cpp:594
#: ../src/richtext/richtextborderspage.cpp:595
#: ../src/richtext/richtextmarginspage.cpp:200
#: ../src/richtext/richtextmarginspage.cpp:202
#: ../src/richtext/richtextmarginspage.cpp:203
#: ../src/richtext/richtextmarginspage.cpp:225
#: ../src/richtext/richtextmarginspage.cpp:227
#: ../src/richtext/richtextmarginspage.cpp:228
#: ../src/richtext/richtextmarginspage.cpp:248
#: ../src/richtext/richtextmarginspage.cpp:250
#: ../src/richtext/richtextmarginspage.cpp:251
#: ../src/richtext/richtextmarginspage.cpp:273
#: ../src/richtext/richtextmarginspage.cpp:275
#: ../src/richtext/richtextmarginspage.cpp:276
#: ../src/richtext/richtextmarginspage.cpp:314
#: ../src/richtext/richtextmarginspage.cpp:316
#: ../src/richtext/richtextmarginspage.cpp:317
#: ../src/richtext/richtextmarginspage.cpp:339
#: ../src/richtext/richtextmarginspage.cpp:341
#: ../src/richtext/richtextmarginspage.cpp:342
#: ../src/richtext/richtextmarginspage.cpp:362
#: ../src/richtext/richtextmarginspage.cpp:364
#: ../src/richtext/richtextmarginspage.cpp:365
#: ../src/richtext/richtextmarginspage.cpp:387
#: ../src/richtext/richtextmarginspage.cpp:389
#: ../src/richtext/richtextmarginspage.cpp:390
#: ../src/richtext/richtextsizepage.cpp:338
#: ../src/richtext/richtextsizepage.cpp:341
#: ../src/richtext/richtextsizepage.cpp:342
#: ../src/richtext/richtextsizepage.cpp:372
#: ../src/richtext/richtextsizepage.cpp:375
#: ../src/richtext/richtextsizepage.cpp:376
#: ../src/richtext/richtextsizepage.cpp:399
#: ../src/richtext/richtextsizepage.cpp:402
#: ../src/richtext/richtextsizepage.cpp:403
#: ../src/richtext/richtextsizepage.cpp:426
#: ../src/richtext/richtextsizepage.cpp:429
#: ../src/richtext/richtextsizepage.cpp:430
#: ../src/richtext/richtextsizepage.cpp:453
#: ../src/richtext/richtextsizepage.cpp:456
#: ../src/richtext/richtextsizepage.cpp:457
#: ../src/richtext/richtextsizepage.cpp:480
#: ../src/richtext/richtextsizepage.cpp:483
#: ../src/richtext/richtextsizepage.cpp:484
#: ../src/richtext/richtextsizepage.cpp:554
#: ../src/richtext/richtextsizepage.cpp:557
#: ../src/richtext/richtextsizepage.cpp:558
#: ../src/richtext/richtextsizepage.cpp:589
#: ../src/richtext/richtextsizepage.cpp:592
#: ../src/richtext/richtextsizepage.cpp:593
#: ../src/richtext/richtextsizepage.cpp:624
#: ../src/richtext/richtextsizepage.cpp:627
#: ../src/richtext/richtextsizepage.cpp:628
#: ../src/richtext/richtextsizepage.cpp:659
#: ../src/richtext/richtextsizepage.cpp:662
#: ../src/richtext/richtextsizepage.cpp:663
msgid "px"
msgstr "piksel"

#: ../src/common/accelcmn.cpp:193
msgid "rawctrl"
msgstr "hamctrl"

#: ../src/html/chm.cpp:333
msgid "read error"
msgstr "okuma hatası"

#: ../src/common/zipstrm.cpp:2085
#, c-format
msgid "reading zip stream (entry %s): bad crc"
msgstr "zip akışı okuma (kayıt %s): CRC hatalı"

#: ../src/common/zipstrm.cpp:2080
#, c-format
msgid "reading zip stream (entry %s): bad length"
msgstr "zip akışı okuma (kayıt %s): uzunluk hatalı"

#: ../src/msw/dde.cpp:1159
msgid "reentrancy problem."
msgstr "yeniden giriş sorunu."

#: ../src/common/datetimefmt.cpp:1953
msgid "second"
msgstr "ikinci"

#: ../src/html/chm.cpp:337
msgid "seek error"
msgstr "arama hatası"

#: ../src/common/datetimefmt.cpp:1968
msgid "seventeenth"
msgstr "onyedinci"

#: ../src/common/datetimefmt.cpp:1958
msgid "seventh"
msgstr "yedinci"

#: ../src/common/accelcmn.cpp:191
msgid "shift"
msgstr "shift"

#: ../src/common/appbase.cpp:773
msgid "show this help message"
msgstr "bu yardım iletisi görüntülensin"

#: ../src/common/datetimefmt.cpp:1967
msgid "sixteenth"
msgstr "onaltıncı"

#: ../src/common/datetimefmt.cpp:1957
msgid "sixth"
msgstr "altıncı"

#: ../src/common/appcmn.cpp:234
msgid "specify display mode to use (e.g. 640x480-16)"
msgstr "kullanılacak görüntü kipini belirleyin (ör. 640x480-16)"

#: ../src/common/appcmn.cpp:220
msgid "specify the theme to use"
msgstr "kullanılacak temayı belirleyin"

#: ../src/richtext/richtextbuffer.cpp:9340
msgid "standard/circle"
msgstr "standart/daire"

#: ../src/richtext/richtextbuffer.cpp:9341
msgid "standard/circle-outline"
msgstr "standart/daire-çerçeve"

#: ../src/richtext/richtextbuffer.cpp:9343
msgid "standard/diamond"
msgstr "standart/elmas"

#: ../src/richtext/richtextbuffer.cpp:9342
msgid "standard/square"
msgstr "standart/kare"

#: ../src/richtext/richtextbuffer.cpp:9344
msgid "standard/triangle"
msgstr "standart/üçgen"

#: ../src/common/zipstrm.cpp:1985
msgid "stored file length not in Zip header"
msgstr "kayıtlı dosya uzunluğu Zip başlığında yok"

#: ../src/common/cmdline.cpp:1488
msgid "str"
msgstr "str"

#: ../src/common/fontcmn.cpp:982
msgid "strikethrough"
msgstr "üstü çizili"

#: ../src/common/tarstrm.cpp:1003 ../src/common/tarstrm.cpp:1025
#: ../src/common/tarstrm.cpp:1507 ../src/common/tarstrm.cpp:1529
msgid "tar entry not open"
msgstr "tar kaydı açık değil"

#: ../src/common/datetimefmt.cpp:1961
msgid "tenth"
msgstr "onuncu"

#: ../src/msw/dde.cpp:1123
msgid "the response to the transaction caused the DDE_FBUSY bit to be set."
msgstr "harekete yanıt DDE_FBUSY bayrak bitinin kaldırılmasına yol açtı."

#: ../src/common/datetimefmt.cpp:1954
msgid "third"
msgstr "üçüncü"

#: ../src/common/datetimefmt.cpp:1964
msgid "thirteenth"
msgstr "onüçüncü"

#: ../src/common/datetimefmt.cpp:1758
msgid "today"
msgstr "bugün"

#: ../src/common/datetimefmt.cpp:1760
msgid "tomorrow"
msgstr "yarın"

#: ../src/common/fileconf.cpp:1944
#, c-format
msgid "trailing backslash ignored in '%s'"
msgstr "'%s' sonundaki ters eğik çizgi yok sayıldı"

#: ../src/gtk/aboutdlg.cpp:218
msgid "translator-credits"
msgstr "çevirmenler"

#. TRANSLATORS: Name of Boolean true value
#: ../src/generic/datavgen.cpp:1028
msgid "true"
msgstr "doğru"

#: ../src/common/datetimefmt.cpp:1963
msgid "twelfth"
msgstr "yirminci"

#: ../src/common/datetimefmt.cpp:1971
msgid "twentieth"
msgstr "onikinci"

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:486 ../src/generic/datavgen.cpp:1263
msgid "unchecked"
msgstr "işaretlenmemiş"

#: ../src/common/fontcmn.cpp:802 ../src/common/fontcmn.cpp:978
msgid "underlined"
msgstr "altı çizili"

#. TRANSLATORS: Checkbox state name
#: ../src/generic/treelist.cpp:490
msgid "undetermined"
msgstr "belirlenmemiş"

#: ../src/common/fileconf.cpp:1979
#, c-format
msgid "unexpected \" at position %d in '%s'."
msgstr "%d konumunda, '%s' içinde beklenmeyen \"."

#: ../src/common/tarstrm.cpp:1045
msgid "unexpected end of file"
msgstr "beklenmeyen dosya sonu"

#: ../src/generic/progdlgg.cpp:370 ../src/common/tarstrm.cpp:371
#: ../src/common/tarstrm.cpp:394 ../src/common/tarstrm.cpp:425
msgid "unknown"
msgstr "bilinmiyor"

#: ../src/msw/registry.cpp:150
#, c-format
msgid "unknown (%lu)"
msgstr "bilinmiyor (%lu)"

#: ../src/common/xtixml.cpp:253
#, c-format
msgid "unknown class %s"
msgstr "bilinmeyen sınıf %s"

#: ../src/common/regex.cpp:258 ../src/html/chm.cpp:351
msgid "unknown error"
msgstr "bilinmeyen hata"

#: ../src/msw/dialup.cpp:471
#, c-format
msgid "unknown error (error code %08x)."
msgstr "bilinmeyen hata (hata kodu %08x)."

#: ../src/common/fmapbase.cpp:834
#, c-format
msgid "unknown-%d"
msgstr "bilinmeyen-%d"

#: ../src/common/docview.cpp:509
msgid "unnamed"
msgstr "adsız"

#: ../src/common/docview.cpp:1624
#, c-format
msgid "unnamed%d"
msgstr "adsız%d"

#: ../src/common/zipstrm.cpp:1999 ../src/common/zipstrm.cpp:2319
msgid "unsupported Zip compression method"
msgstr "desteklenmeyen Zip sıkıştırma yöntemi"

#: ../src/common/translation.cpp:1892
#, c-format
msgid "using catalog '%s' from '%s'."
msgstr "'%s' kataloğu '%s' üzerinden kullanılıyor."

#: ../src/html/chm.cpp:335
msgid "write error"
msgstr "yazma sorunu"

#: ../src/common/time.cpp:292
msgid "wxGetTimeOfDay failed."
msgstr "wxGetTimeOfDay başarısız."

#: ../src/motif/app.cpp:242
#, c-format
msgid "wxWidgets could not open display for '%s': exiting."
msgstr "wxWidgets '%s' için görünümü açamadı: çıkılıyor."

#: ../src/x11/app.cpp:170
msgid "wxWidgets could not open display. Exiting."
msgstr "wxWidgets görünümü açamadı. Çıkılıyor."

#: ../src/richtext/richtextsymboldlg.cpp:434
msgid "xxxx"
msgstr "xxxx"

#: ../src/common/datetimefmt.cpp:1759
msgid "yesterday"
msgstr "dün"

#: ../src/common/zstream.cpp:251 ../src/common/zstream.cpp:426
#, c-format
msgid "zlib error %d"
msgstr "zlib hatası %d"

#: ../src/richtext/richtextliststylepage.cpp:496
#: ../src/richtext/richtextbulletspage.cpp:288
msgid "~"
msgstr "~"