127 lines
5.0 KiB
Perl
127 lines
5.0 KiB
Perl
use Test::More tests => 6;
|
|
use strict;
|
|
use warnings;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/../lib";
|
|
}
|
|
|
|
use List::Util qw(first);
|
|
use Slic3r;
|
|
use Slic3r::Geometry qw(scale convex_hull);
|
|
use Slic3r::Test;
|
|
|
|
{
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('raft_layers', 2);
|
|
$config->set('infill_extruder', 2);
|
|
$config->set('support_material_extruder', 3);
|
|
$config->set('ooze_prevention', 1);
|
|
$config->set('extruder_offset', [ [0,0], [20,0], [0,20] ]);
|
|
$config->set('temperature', [200, 180, 170]);
|
|
$config->set('first_layer_temperature', [206, 186, 166]);
|
|
$config->set('toolchange_gcode', ';toolchange'); # test that it doesn't crash when this is supplied
|
|
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
|
|
my $tool = undef;
|
|
my @tool_temp = (0,0,0);
|
|
my @toolchange_points = ();
|
|
my @extrusion_points = ();
|
|
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
|
|
if ($cmd =~ /^T(\d+)/) {
|
|
if (defined $tool) {
|
|
my $expected_temp = $self->Z == ($config->get_value('first_layer_height') + $config->z_offset)
|
|
? $config->first_layer_temperature->[$tool]
|
|
: $config->temperature->[$tool];
|
|
die 'standby temperature was not set before toolchange'
|
|
if $tool_temp[$tool] != $expected_temp + $config->standby_temperature_delta;
|
|
}
|
|
$tool = $1;
|
|
push @toolchange_points, Slic3r::Point->new_scale($self->X, $self->Y);
|
|
} elsif ($cmd eq 'M104' || $cmd eq 'M109') {
|
|
my $t = $args->{T} // $tool;
|
|
if ($tool_temp[$t] == 0) {
|
|
fail 'initial temperature is not equal to first layer temperature + standby delta'
|
|
unless $args->{S} == $config->first_layer_temperature->[$t] + $config->standby_temperature_delta;
|
|
}
|
|
$tool_temp[$t] = $args->{S};
|
|
} elsif ($cmd eq 'G1' && $info->{extruding} && $info->{dist_XY} > 0) {
|
|
push @extrusion_points, my $point = Slic3r::Point->new_scale($args->{X}, $args->{Y});
|
|
$point->translate(map scale($_), @{ $config->extruder_offset->[$tool] });
|
|
}
|
|
});
|
|
my $convex_hull = convex_hull(\@extrusion_points);
|
|
ok !(first { $convex_hull->contains_point($_) } @toolchange_points), 'all toolchanges happen outside skirt';
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('support_material_extruder', 3);
|
|
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
ok Slic3r::Test::gcode($print), 'no errors when using non-consecutive extruders';
|
|
}
|
|
|
|
{
|
|
my $model = Slic3r::Model->new;
|
|
my $object = $model->add_object;
|
|
my $lower_config = $model->set_material('lower')->config;
|
|
my $upper_config = $model->set_material('upper')->config;
|
|
$object->add_volume(mesh => Slic3r::Test::mesh('20mm_cube'), material_id => 'lower');
|
|
$object->add_volume(mesh => Slic3r::Test::mesh('20mm_cube', translate => [0,0,20]), material_id => 'upper');
|
|
$object->add_instance(offset => [0,0]);
|
|
|
|
$lower_config->set('extruder', 1);
|
|
$lower_config->set('bottom_solid_layers', 0);
|
|
$lower_config->set('top_solid_layers', 1);
|
|
$upper_config->set('extruder', 2);
|
|
$upper_config->set('bottom_solid_layers', 1);
|
|
$upper_config->set('top_solid_layers', 0);
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('fill_density', 0);
|
|
$config->set('solid_infill_speed', 99);
|
|
$config->set('top_solid_infill_speed', 99);
|
|
$config->set('cooling', 0); # for preventing speeds from being altered
|
|
$config->set('first_layer_speed', '100%'); # for preventing speeds from being altered
|
|
|
|
my $test = sub {
|
|
my $print = Slic3r::Test::init_print($model, config => $config);
|
|
my $tool = undef;
|
|
my %T0_shells = my %T1_shells = (); # Z => 1
|
|
Slic3r::GCode::Reader->new->parse(my $gcode = Slic3r::Test::gcode($print), sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
|
|
if ($cmd =~ /^T(\d+)/) {
|
|
$tool = $1;
|
|
} elsif ($cmd eq 'G1' && $info->{extruding} && $info->{dist_XY} > 0) {
|
|
if (($args->{F} // $self->F) == $config->solid_infill_speed*60) {
|
|
if ($tool == 0) {
|
|
$T0_shells{$self->Z} = 1;
|
|
} elsif ($tool == 1) {
|
|
$T1_shells{$self->Z} = 1;
|
|
}
|
|
}
|
|
}
|
|
});
|
|
return [ sort keys %T0_shells ], [ sort keys %T1_shells ];
|
|
};
|
|
|
|
{
|
|
my ($t0, $t1) = $test->();
|
|
is scalar(@$t0), 0, 'no interface shells';
|
|
is scalar(@$t1), 0, 'no interface shells';
|
|
}
|
|
{
|
|
$config->set('interface_shells', 1);
|
|
my ($t0, $t1) = $test->();
|
|
is scalar(@$t0), $lower_config->top_solid_layers, 'top interface shells';
|
|
is scalar(@$t1), $upper_config->bottom_solid_layers, 'bottom interface shells';
|
|
}
|
|
}
|
|
|
|
__END__
|