4164 lines
151 KiB
INI
4164 lines
151 KiB
INI
# Print profiles for the Prusa Research printers.
|
|
|
|
[vendor]
|
|
# Vendor name will be shown by the Config Wizard.
|
|
name = Prusa Research
|
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
|
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
|
config_version = 1.0.7
|
|
# Where to get the updates from?
|
|
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
|
changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
|
|
|
# The printer models will be shown by the Configuration Wizard in this order,
|
|
# also the first model installed & the first nozzle installed will be activated after install.
|
|
#TODO: One day we may differentiate variants of the nozzles / hot ends,
|
|
#for example by the melt zone size, or whether the nozzle is hardened.
|
|
# Printer model name will be shown by the installation wizard.
|
|
|
|
|
|
[printer_model:MINI]
|
|
name = Original Prusa MINI
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MINI
|
|
|
|
[printer_model:MK3S]
|
|
name = Original Prusa i3 MK3S
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK3
|
|
|
|
[printer_model:MK3]
|
|
name = Original Prusa i3 MK3
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK3
|
|
|
|
[printer_model:MK3SMMU2S]
|
|
name = Original Prusa i3 MK3S MMU2S
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK3
|
|
|
|
[printer_model:MK3MMU2]
|
|
name = Original Prusa i3 MK3 MMU2
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK3
|
|
|
|
[printer_model:MK2.5S]
|
|
name = Original Prusa i3 MK2.5S
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK2.5
|
|
|
|
[printer_model:MK2.5]
|
|
name = Original Prusa i3 MK2.5
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK2.5
|
|
|
|
[printer_model:MK2.5SMMU2S]
|
|
name = Original Prusa i3 MK2.5S MMU2S
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK2.5
|
|
|
|
[printer_model:MK2.5MMU2]
|
|
name = Original Prusa i3 MK2.5 MMU2
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK2.5
|
|
|
|
[printer_model:MK2S]
|
|
name = Original Prusa i3 MK2S
|
|
variants = 0.4; 0.25; 0.6
|
|
technology = FFF
|
|
family = MK2
|
|
|
|
[printer_model:MK2SMM]
|
|
name = Original Prusa i3 MK2S MMU1
|
|
variants = 0.4; 0.6
|
|
technology = FFF
|
|
family = MK2
|
|
|
|
[printer_model:SL1]
|
|
name = Original Prusa SL1
|
|
variants = default
|
|
technology = SLA
|
|
family = SL1
|
|
|
|
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
|
# not make it into the user interface.
|
|
|
|
# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
|
|
# All other print presets will derive from the *common* print preset.
|
|
[print:*common*]
|
|
avoid_crossing_perimeters = 0
|
|
bridge_acceleration = 1000
|
|
bridge_angle = 0
|
|
bridge_flow_ratio = 0.8
|
|
bridge_speed = 20
|
|
brim_width = 0
|
|
clip_multipart_objects = 1
|
|
compatible_printers =
|
|
complete_objects = 0
|
|
default_acceleration = 1000
|
|
dont_support_bridges = 1
|
|
elefant_foot_compensation = 0
|
|
ensure_vertical_shell_thickness = 1
|
|
external_fill_pattern = rectilinear
|
|
external_perimeters_first = 0
|
|
external_perimeter_extrusion_width = 0.45
|
|
extra_perimeters = 0
|
|
extruder_clearance_height = 25
|
|
extruder_clearance_radius = 45
|
|
extrusion_width = 0.45
|
|
fill_angle = 45
|
|
fill_density = 20%
|
|
fill_pattern = cubic
|
|
first_layer_acceleration = 1000
|
|
first_layer_extrusion_width = 0.42
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 20
|
|
gap_fill_speed = 40
|
|
gcode_comments = 0
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.45
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 25%
|
|
interface_shells = 0
|
|
max_print_speed = 100
|
|
max_volumetric_extrusion_rate_slope_negative = 0
|
|
max_volumetric_extrusion_rate_slope_positive = 0
|
|
max_volumetric_speed = 0
|
|
min_skirt_length = 4
|
|
notes =
|
|
overhangs = 0
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
perimeters = 2
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.45
|
|
post_process =
|
|
print_settings_id =
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = nearest
|
|
single_extruder_multi_material_priming = 1
|
|
skirts = 1
|
|
skirt_distance = 2
|
|
skirt_height = 3
|
|
small_perimeter_speed = 25
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.45
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.35
|
|
support_material_interface_extruder = 0
|
|
support_material_angle = 0
|
|
support_material_buildplate_only = 0
|
|
support_material_enforce_layers = 0
|
|
support_material_contact_distance = 0.1
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_spacing = 2
|
|
support_material_speed = 50
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 55
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 50%
|
|
thin_walls = 0
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 40
|
|
travel_speed = 180
|
|
wipe_tower = 1
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
xy_size_compensation = 0
|
|
|
|
[print:*MK3*]
|
|
fill_pattern = grid
|
|
single_extruder_multi_material_priming = 0
|
|
travel_speed = 180
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 125
|
|
|
|
[print:*MK306*]
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
single_extruder_multi_material_priming = 0
|
|
travel_speed = 180
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 125
|
|
|
|
## MINI
|
|
|
|
[print:*MINI*]
|
|
fill_pattern = grid
|
|
travel_speed = 150
|
|
wipe_tower = 0
|
|
default_acceleration = 1250
|
|
first_layer_acceleration = 800
|
|
infill_acceleration = 1000
|
|
bridge_acceleration = 1000
|
|
support_material_speed = 40
|
|
max_print_speed = 150
|
|
extruder_clearance_height = 20
|
|
extruder_clearance_radius = 35
|
|
|
|
# Print parameters common to a 0.25mm diameter nozzle.
|
|
[print:*0.25nozzle*]
|
|
external_perimeter_extrusion_width = 0.25
|
|
extrusion_width = 0.25
|
|
first_layer_extrusion_width = 0.3
|
|
infill_extrusion_width = 0.25
|
|
perimeter_extrusion_width = 0.25
|
|
solid_infill_extrusion_width = 0.25
|
|
top_infill_extrusion_width = 0.25
|
|
support_material_extrusion_width = 0.2
|
|
support_material_interface_layers = 0
|
|
support_material_interface_spacing = 0.15
|
|
support_material_spacing = 1
|
|
support_material_xy_spacing = 150%
|
|
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
|
|
[print:*0.25nozzleMK3*]
|
|
external_perimeter_extrusion_width = 0.25
|
|
extrusion_width = 0.25
|
|
first_layer_extrusion_width = 0.3
|
|
infill_extrusion_width = 0.25
|
|
perimeter_extrusion_width = 0.25
|
|
solid_infill_extrusion_width = 0.25
|
|
top_infill_extrusion_width = 0.25
|
|
support_material_extrusion_width = 0.2
|
|
support_material_interface_layers = 0
|
|
support_material_interface_spacing = 0.15
|
|
support_material_spacing = 1
|
|
support_material_xy_spacing = 150%
|
|
perimeter_speed = 30
|
|
external_perimeter_speed = 20
|
|
small_perimeter_speed = 20
|
|
infill_speed = 45
|
|
solid_infill_speed = 45
|
|
top_solid_infill_speed = 30
|
|
support_material_speed = 40
|
|
bridge_speed = 20
|
|
gap_fill_speed = 30
|
|
perimeter_acceleration = 500
|
|
infill_acceleration = 1000
|
|
bridge_acceleration = 500
|
|
first_layer_acceleration = 500
|
|
default_acceleration = 1000
|
|
max_print_speed = 80
|
|
perimeters = 3
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
|
|
[print:*0.25nozzleMINI*]
|
|
external_perimeter_extrusion_width = 0.25
|
|
extrusion_width = 0.25
|
|
first_layer_extrusion_width = 0.3
|
|
infill_extrusion_width = 0.25
|
|
perimeter_extrusion_width = 0.25
|
|
solid_infill_extrusion_width = 0.25
|
|
top_infill_extrusion_width = 0.25
|
|
support_material_extrusion_width = 0.2
|
|
support_material_interface_layers = 0
|
|
support_material_interface_spacing = 0.15
|
|
support_material_spacing = 1
|
|
support_material_xy_spacing = 150%
|
|
perimeter_speed = 30
|
|
external_perimeter_speed = 20
|
|
small_perimeter_speed = 20
|
|
infill_speed = 40
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
support_material_speed = 40
|
|
bridge_speed = 20
|
|
gap_fill_speed = 30
|
|
perimeter_acceleration = 500
|
|
infill_acceleration = 800
|
|
bridge_acceleration = 500
|
|
first_layer_acceleration = 500
|
|
max_print_speed = 80
|
|
perimeters = 3
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
|
|
# Print parameters common to a 0.6mm diameter nozzle.
|
|
[print:*0.6nozzle*]
|
|
external_perimeter_extrusion_width = 0.61
|
|
extrusion_width = 0.67
|
|
first_layer_extrusion_width = 0.65
|
|
infill_extrusion_width = 0.7
|
|
perimeter_extrusion_width = 0.65
|
|
solid_infill_extrusion_width = 0.65
|
|
top_infill_extrusion_width = 0.6
|
|
support_material_extrusion_width = 0.55
|
|
support_material_contact_distance = 0.15
|
|
support_material_xy_spacing = 80%
|
|
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
|
|
[print:*0.6nozzleMK3*]
|
|
external_perimeter_extrusion_width = 0.65
|
|
extrusion_width = 0.65
|
|
first_layer_extrusion_width = 0.65
|
|
infill_extrusion_width = 0.7
|
|
perimeter_extrusion_width = 0.65
|
|
solid_infill_extrusion_width = 0.7
|
|
top_infill_extrusion_width = 0.6
|
|
support_material_extrusion_width = 0.55
|
|
bridge_flow_ratio = 0.95
|
|
bridge_speed = 25
|
|
support_material_contact_distance = 0.15
|
|
support_material_xy_spacing = 80%
|
|
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
|
|
[print:*0.6nozzleMINI*]
|
|
external_perimeter_extrusion_width = 0.65
|
|
extrusion_width = 0.65
|
|
first_layer_extrusion_width = 0.65
|
|
infill_extrusion_width = 0.68
|
|
perimeter_extrusion_width = 0.65
|
|
solid_infill_extrusion_width = 0.68
|
|
top_infill_extrusion_width = 0.6
|
|
support_material_extrusion_width = 0.55
|
|
bridge_flow_ratio = 0.95
|
|
bridge_speed = 25
|
|
support_material_contact_distance = 0.15
|
|
support_material_xy_spacing = 80%
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
travel_speed = 150
|
|
perimeter_acceleration = 800
|
|
infill_acceleration = 1000
|
|
bridge_acceleration = 1000
|
|
first_layer_acceleration = 1000
|
|
default_acceleration = 1250
|
|
support_material_speed = 40
|
|
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
|
|
[print:*soluble_support*]
|
|
overhangs = 1
|
|
skirts = 0
|
|
support_material = 1
|
|
support_material_contact_distance = 0
|
|
support_material_extruder = 4
|
|
support_material_extrusion_width = 0.45
|
|
support_material_interface_extruder = 4
|
|
support_material_interface_spacing = 0.1
|
|
support_material_synchronize_layers = 1
|
|
support_material_threshold = 80
|
|
support_material_with_sheath = 1
|
|
wipe_tower_bridging = 6
|
|
support_material_interface_speed = 80%
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.05mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.05mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 10
|
|
bridge_acceleration = 300
|
|
bridge_flow_ratio = 0.7
|
|
default_acceleration = 1000
|
|
external_perimeter_speed = 20
|
|
fill_density = 20%
|
|
first_layer_acceleration = 500
|
|
gap_fill_speed = 20
|
|
infill_acceleration = 800
|
|
infill_speed = 30
|
|
max_print_speed = 80
|
|
small_perimeter_speed = 20
|
|
solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.3
|
|
support_material_spacing = 1.5
|
|
layer_height = 0.05
|
|
perimeter_acceleration = 300
|
|
perimeter_speed = 30
|
|
perimeters = 3
|
|
support_material_speed = 30
|
|
top_solid_infill_speed = 20
|
|
top_solid_layers = 15
|
|
|
|
[print:0.05mm ULTRADETAIL]
|
|
inherits = *0.05mm*
|
|
# alias = 0.05mm ULTRADETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
|
infill_extrusion_width = 0.5
|
|
|
|
# MK3 #
|
|
[print:0.05mm ULTRADETAIL MK3]
|
|
inherits = *0.05mm*; *MK3*
|
|
# alias = 0.05mm ULTRADETAIL
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
|
top_infill_extrusion_width = 0.4
|
|
|
|
# MK2 #
|
|
[print:0.05mm ULTRADETAIL 0.25 nozzle]
|
|
inherits = *0.05mm*; *0.25nozzle*
|
|
# alias = 0.05mm ULTRADETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
|
fill_density = 20%
|
|
infill_speed = 20
|
|
max_print_speed = 100
|
|
perimeter_speed = 20
|
|
small_perimeter_speed = 15
|
|
solid_infill_speed = 20
|
|
support_material_speed = 20
|
|
|
|
# MK3 #
|
|
[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
|
|
inherits = *0.05mm*; *0.25nozzle*; *MK3*
|
|
# alias = 0.05mm ULTRADETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.07mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.07mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 8
|
|
bridge_acceleration = 300
|
|
bridge_flow_ratio = 0.7
|
|
bridge_speed = 20
|
|
default_acceleration = 1000
|
|
external_perimeter_speed = 20
|
|
fill_density = 15%
|
|
first_layer_acceleration = 500
|
|
gap_fill_speed = 20
|
|
infill_acceleration = 800
|
|
infill_speed = 40
|
|
max_print_speed = 80
|
|
small_perimeter_speed = 20
|
|
solid_infill_speed = 40
|
|
support_material_extrusion_width = 0.3
|
|
support_material_spacing = 1.5
|
|
layer_height = 0.07
|
|
perimeter_acceleration = 300
|
|
perimeter_speed = 30
|
|
perimeters = 3
|
|
support_material_speed = 40
|
|
top_solid_infill_speed = 30
|
|
top_solid_layers = 11
|
|
|
|
# MK3 #
|
|
[print:0.07mm ULTRADETAIL MK3]
|
|
inherits = *0.07mm*; *MK3*
|
|
# alias = 0.07mm ULTRADETAIL
|
|
fill_pattern = gyroid
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
|
top_infill_extrusion_width = 0.4
|
|
|
|
[print:0.07mm ULTRADETAIL 0.25 nozzle MK3]
|
|
inherits = *0.07mm*; *0.25nozzle*; *MK3*
|
|
# alias = 0.07mm ULTRADETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
|
infill_speed = 30
|
|
solid_infill_speed = 30
|
|
support_material_speed = 30
|
|
top_solid_infill_speed = 20
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.10mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
# MK2 #
|
|
[print:*0.10mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 7
|
|
bridge_flow_ratio = 0.7
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
|
layer_height = 0.1
|
|
perimeter_acceleration = 800
|
|
top_solid_layers = 9
|
|
|
|
# MK2 #
|
|
[print:0.10mm DETAIL]
|
|
inherits = *0.10mm*
|
|
# alias = 0.10mm DETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
|
external_perimeter_speed = 40
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
perimeter_speed = 50
|
|
solid_infill_speed = 50
|
|
|
|
# MK3 #
|
|
[print:0.10mm DETAIL MK3]
|
|
inherits = *0.10mm*; *MK3*
|
|
# alias = 0.10mm DETAIL
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
|
external_perimeter_speed = 25
|
|
infill_acceleration = 1250
|
|
infill_speed = 80
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 80
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_infill_speed = 40
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
|
|
# MK2 #
|
|
[print:0.10mm DETAIL 0.25 nozzle]
|
|
inherits = *0.10mm*; *0.25nozzle*
|
|
# alias = 0.10mm DETAIL
|
|
bridge_acceleration = 600
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
|
|
external_perimeter_speed = 20
|
|
infill_acceleration = 1000
|
|
infill_speed = 40
|
|
perimeter_acceleration = 600
|
|
perimeter_speed = 25
|
|
small_perimeter_speed = 15
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
|
|
# MK3 #
|
|
[print:0.10mm DETAIL 0.25 nozzle MK3]
|
|
inherits = *0.10mm*; *0.25nozzleMK3*; *MK3*
|
|
# alias = 0.10mm DETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.15mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.15mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 5
|
|
external_perimeter_speed = 40
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
layer_height = 0.15
|
|
perimeter_acceleration = 800
|
|
perimeter_speed = 50
|
|
solid_infill_speed = 50
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_layers = 7
|
|
|
|
# MK2 #
|
|
[print:0.15mm 100mms Linear Advance]
|
|
inherits = *0.15mm*
|
|
bridge_flow_ratio = 0.95
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 50
|
|
infill_speed = 100
|
|
max_print_speed = 150
|
|
perimeter_speed = 60
|
|
small_perimeter_speed = 30
|
|
solid_infill_speed = 100
|
|
support_material_speed = 60
|
|
top_solid_infill_speed = 70
|
|
|
|
# MK2 #
|
|
[print:0.15mm OPTIMAL]
|
|
inherits = *0.15mm*
|
|
# alias = 0.15mm OPTIMAL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
top_infill_extrusion_width = 0.45
|
|
|
|
# MK2 #
|
|
[print:0.15mm OPTIMAL 0.25 nozzle]
|
|
inherits = *0.15mm*; *0.25nozzle*
|
|
# alias = 0.15mm OPTIMAL
|
|
bridge_acceleration = 600
|
|
bridge_flow_ratio = 0.7
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
|
|
external_perimeter_speed = 20
|
|
infill_acceleration = 1000
|
|
infill_speed = 40
|
|
perimeter_acceleration = 600
|
|
perimeter_speed = 25
|
|
small_perimeter_speed = 15
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
|
|
# MK2 #
|
|
[print:0.15mm OPTIMAL 0.6 nozzle]
|
|
inherits = *0.15mm*; *0.6nozzle*
|
|
# alias = 0.15mm OPTIMAL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
|
|
|
# MK3 #
|
|
[print:0.15mm QUALITY MK3]
|
|
inherits = *0.15mm*; *MK3*
|
|
# alias = 0.15mm QUALITY
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 25
|
|
infill_acceleration = 1250
|
|
infill_speed = 80
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 80
|
|
top_solid_infill_speed = 40
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
|
|
[print:0.15mm SPEED MK3]
|
|
inherits = *0.15mm*; *MK3*
|
|
# alias = 0.15mm SPEED
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 60
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
# MK3 MMU #
|
|
[print:0.15mm SOLUBLE FULL MK3]
|
|
inherits = 0.15mm SPEED MK3; *soluble_support*
|
|
# alias = 0.15mm SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 30
|
|
|
|
# MK3 MMU #
|
|
[print:0.15mm SOLUBLE INTERFACE MK3]
|
|
inherits = 0.15mm SOLUBLE FULL MK3
|
|
# alias = 0.15mm SOLUBLE INTERFACE
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
|
|
# MK2 MMU #
|
|
[print:0.15mm OPTIMAL SOLUBLE FULL]
|
|
inherits = *0.15mm*; *soluble_support*
|
|
# alias = 0.15mm OPTIMAL SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
external_perimeter_speed = 25
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 30
|
|
|
|
# MK2 MMU #
|
|
[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
|
|
inherits = 0.15mm OPTIMAL SOLUBLE FULL
|
|
# alias = 0.15mm OPTIMAL SOLUBLE INTERFACE
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 80%
|
|
|
|
# MK3 #
|
|
[print:0.15mm QUALITY 0.25 nozzle MK3]
|
|
inherits = *0.15mm*; *0.25nozzleMK3*; *MK3*
|
|
# alias = 0.15mm QUALITY
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
# MK3 #
|
|
[print:0.15mm DETAIL 0.6 nozzle MK3]
|
|
inherits = *0.15mm*; *0.6nozzleMK3*; *MK306*
|
|
# alias = 0.15mm DETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 70
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 70
|
|
top_solid_infill_speed = 45
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.20mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.20mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 4
|
|
bridge_flow_ratio = 0.95
|
|
external_perimeter_speed = 40
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
layer_height = 0.2
|
|
perimeter_acceleration = 800
|
|
perimeter_speed = 50
|
|
solid_infill_speed = 50
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_layers = 5
|
|
|
|
# MK2 #
|
|
[print:0.20mm 100mms Linear Advance]
|
|
inherits = *0.20mm*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 50
|
|
infill_speed = 100
|
|
max_print_speed = 150
|
|
perimeter_speed = 60
|
|
small_perimeter_speed = 30
|
|
solid_infill_speed = 100
|
|
support_material_speed = 60
|
|
top_solid_infill_speed = 70
|
|
|
|
# MK3 #
|
|
[print:0.20mm QUALITY MK3]
|
|
inherits = *0.20mm*; *MK3*
|
|
# alias = 0.20mm QUALITY
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 25
|
|
infill_acceleration = 1250
|
|
infill_speed = 80
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 80
|
|
top_solid_infill_speed = 40
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
|
|
[print:0.20mm SPEED MK3]
|
|
inherits = *0.20mm*; *MK3*
|
|
# alias = 0.20mm SPEED
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 60
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
# MK3 MMU #
|
|
[print:0.20mm SOLUBLE FULL MK3]
|
|
inherits = 0.20mm SPEED MK3; *soluble_support*
|
|
# alias = 0.20mm SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 30
|
|
|
|
# MK3 MMU #
|
|
[print:0.20mm SOLUBLE INTERFACE MK3]
|
|
inherits = 0.20mm SOLUBLE FULL MK3
|
|
# alias = 0.20mm SOLUBLE INTERFACE
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
|
|
# MK2 #
|
|
[print:0.20mm NORMAL]
|
|
inherits = *0.20mm*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
|
|
# MK2 #
|
|
[print:0.20mm NORMAL 0.6 nozzle]
|
|
inherits = *0.20mm*; *0.6nozzle*
|
|
# alias = 0.20mm NORMAL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
|
|
|
# MK2 MMU #
|
|
[print:0.20mm NORMAL SOLUBLE FULL]
|
|
inherits = *0.20mm*; *soluble_support*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
external_perimeter_speed = 30
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
|
|
# MK2 MMU #
|
|
[print:0.20mm NORMAL SOLUBLE INTERFACE]
|
|
inherits = 0.20mm NORMAL SOLUBLE FULL
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 80%
|
|
|
|
# MK3 #
|
|
[print:0.20mm DETAIL 0.6 nozzle MK3]
|
|
inherits = *0.20mm*; *0.6nozzleMK3*; *MK306*
|
|
# alias = 0.20mm DETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 70
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 70
|
|
top_solid_infill_speed = 45
|
|
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.25mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.25mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 4
|
|
bridge_flow_ratio = 0.95
|
|
external_perimeter_speed = 40
|
|
perimeter_acceleration = 800
|
|
layer_height = 0.25
|
|
perimeter_speed = 50
|
|
top_solid_layers = 4
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.30mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.30mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 4
|
|
bridge_flow_ratio = 0.95
|
|
external_perimeter_speed = 40
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
layer_height = 0.3
|
|
perimeter_acceleration = 800
|
|
perimeter_speed = 50
|
|
solid_infill_speed = 50
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_layers = 4
|
|
|
|
[print:0.30mm QUALITY 0.6 nozzle MK3]
|
|
inherits = *0.30mm*; *0.6nozzleMK3*; *MK306*
|
|
# alias = 0.30mm QUALITY
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 70
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 70
|
|
top_solid_infill_speed = 45
|
|
|
|
[print:0.30mm SOLUBLE FULL 0.6 nozzle MK3]
|
|
inherits = 0.30mm QUALITY 0.6 nozzle MK3; *soluble_support*
|
|
# alias = 0.30mm SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
support_material_speed = 40
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_infill_extrusion_width = 0.6
|
|
support_material_extrusion_width = 0.6
|
|
top_solid_infill_speed = 30
|
|
support_material_xy_spacing = 80%
|
|
|
|
[print:0.30mm SOLUBLE INTERFACE 0.6 nozzle MK3]
|
|
inherits = 0.30mm SOLUBLE FULL 0.6 nozzle MK3
|
|
# alias = 0.30mm SOLUBLE INTERFACE
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
|
|
[print:0.30mm DRAFT MK3]
|
|
inherits = *0.30mm*; *MK3*
|
|
# alias = 0.30mm DRAFT
|
|
bottom_solid_layers = 3
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 85
|
|
max_print_speed = 200
|
|
perimeter_speed = 50
|
|
small_perimeter_speed = 30
|
|
solid_infill_speed = 80
|
|
top_solid_infill_speed = 40
|
|
support_material_speed = 45
|
|
external_perimeter_extrusion_width = 0.6
|
|
extrusion_width = 0.5
|
|
first_layer_extrusion_width = 0.42
|
|
infill_extrusion_width = 0.5
|
|
perimeter_extrusion_width = 0.5
|
|
solid_infill_extrusion_width = 0.5
|
|
top_infill_extrusion_width = 0.45
|
|
support_material_extrusion_width = 0.38
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.35mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.35mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 3
|
|
external_perimeter_extrusion_width = 0.6
|
|
external_perimeter_speed = 40
|
|
first_layer_extrusion_width = 0.75
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
layer_height = 0.35
|
|
perimeter_acceleration = 800
|
|
perimeter_extrusion_width = 0.65
|
|
perimeter_speed = 50
|
|
solid_infill_extrusion_width = 0.65
|
|
solid_infill_speed = 60
|
|
top_solid_infill_speed = 50
|
|
top_solid_layers = 4
|
|
|
|
# MK2 #
|
|
[print:0.35mm FAST]
|
|
inherits = *0.35mm*
|
|
bridge_flow_ratio = 0.95
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
first_layer_extrusion_width = 0.42
|
|
perimeter_extrusion_width = 0.43
|
|
solid_infill_extrusion_width = 0.7
|
|
top_infill_extrusion_width = 0.43
|
|
support_material_extrusion_width = 0.37
|
|
|
|
# MK2 #
|
|
[print:0.35mm FAST 0.6 nozzle]
|
|
inherits = *0.35mm*; *0.6nozzle*
|
|
# alias = 0.35mm FAST
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
|
|
|
# MK2 MMU #
|
|
[print:0.35mm FAST sol full 0.6 nozzle]
|
|
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
|
|
# alias = 0.35mm FAST SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
|
|
external_perimeter_extrusion_width = 0.6
|
|
external_perimeter_speed = 30
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
perimeter_speed = 40
|
|
support_material_speed = 40
|
|
support_material_interface_layers = 2
|
|
support_material_xy_spacing = 120%
|
|
top_infill_extrusion_width = 0.6
|
|
support_material_extrusion_width = 0.6
|
|
|
|
# MK2 MMU #
|
|
[print:0.35mm FAST sol int 0.6 nozzle]
|
|
inherits = 0.35mm FAST sol full 0.6 nozzle
|
|
# alias = 0.35mm FAST SOLUBLE INTERFACE
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 150%
|
|
|
|
# MK3 #
|
|
[print:0.35mm SPEED 0.6 nozzle MK3]
|
|
inherits = *0.35mm*; *0.6nozzleMK3*; *MK306*
|
|
# alias = 0.35mm SPEED
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 70
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 70
|
|
top_solid_infill_speed = 45
|
|
external_perimeter_extrusion_width = 0.68
|
|
perimeter_extrusion_width = 0.68
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.40mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.40mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 3
|
|
external_perimeter_extrusion_width = 0.6
|
|
external_perimeter_speed = 40
|
|
first_layer_extrusion_width = 0.65
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
layer_height = 0.4
|
|
perimeter_acceleration = 800
|
|
perimeter_extrusion_width = 0.65
|
|
perimeter_speed = 50
|
|
solid_infill_extrusion_width = 0.65
|
|
solid_infill_speed = 60
|
|
top_solid_infill_speed = 40
|
|
top_solid_layers = 4
|
|
|
|
# MK3 #
|
|
[print:0.40mm DRAFT 0.6 nozzle MK3]
|
|
inherits = *0.40mm*; *0.6nozzleMK3*; *MK306*
|
|
# alias = 0.40mm DRAFT
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 70
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 70
|
|
top_solid_infill_speed = 45
|
|
external_perimeter_extrusion_width = 0.7
|
|
perimeter_extrusion_width = 0.7
|
|
infill_extrusion_width = 0.7
|
|
solid_infill_extrusion_width = 0.7
|
|
|
|
# XXXXXXXXXXXXXXXXXXXXXX
|
|
# XXX----- MK2.5 ----XXX
|
|
# XXXXXXXXXXXXXXXXXXXXXX
|
|
|
|
# MK2.5 #
|
|
[print:0.15mm 100mms Linear Advance MK2.5]
|
|
inherits = 0.15mm 100mms Linear Advance
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# MK2.5 #
|
|
[print:0.15mm OPTIMAL MK2.5]
|
|
inherits = 0.15mm OPTIMAL
|
|
# alias = 0.15mm OPTIMAL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# MK2.5 MMU2 #
|
|
[print:0.15mm OPTIMAL SOLUBLE FULL MK2.5]
|
|
inherits = 0.15mm OPTIMAL SOLUBLE FULL
|
|
# alias = 0.15mm OPTIMAL SOLUBLE FULL
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
|
|
# MK2.5 MMU2 #
|
|
[print:0.15mm OPTIMAL SOLUBLE INTERFACE MK2.5]
|
|
inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE
|
|
# alias = 0.15mm OPTIMAL SOLUBLE INTERFACE
|
|
support_material_extruder = 0
|
|
support_material_interface_extruder = 5
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
|
|
# MK2.5 #
|
|
[print:0.20mm 100mms Linear Advance MK2.5]
|
|
inherits = 0.20mm 100mms Linear Advance
|
|
# alias = 0.20mm 100mms Linear Advance
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# MK2.5 #
|
|
[print:0.20mm NORMAL MK2.5]
|
|
inherits = 0.20mm NORMAL
|
|
# alias = 0.20mm NORMAL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# MK2.5 MMU2 #
|
|
[print:0.20mm NORMAL SOLUBLE FULL MK2.5]
|
|
inherits = 0.20mm NORMAL SOLUBLE FULL
|
|
# alias = 0.20mm NORMAL SOLUBLE FULL
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# MK2.5 MMU2 #
|
|
[print:0.20mm NORMAL SOLUBLE INTERFACE MK2.5]
|
|
inherits = 0.20mm NORMAL SOLUBLE INTERFACE
|
|
# alias = 0.20mm NORMAL SOLUBLE INTERFACE
|
|
support_material_extruder = 0
|
|
support_material_interface_extruder = 5
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# MK2.5 #
|
|
[print:0.35mm FAST MK2.5]
|
|
inherits = 0.35mm FAST
|
|
# alias = 0.35mm FAST
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# MK2.5 MMU2 0.6 nozzle#
|
|
[print:0.35mm SOLUBLE FULL 0.6 nozzle MK2.5]
|
|
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
|
|
# alias = 0.35mm SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
|
|
external_perimeter_extrusion_width = 0.6
|
|
external_perimeter_speed = 30
|
|
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
perimeter_speed = 40
|
|
support_material_speed = 40
|
|
support_material_interface_layers = 2
|
|
support_material_xy_spacing = 80%
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
top_infill_extrusion_width = 0.6
|
|
support_material_extrusion_width = 0.6
|
|
|
|
[print:0.35mm SOLUBLE INTERFACE 0.6 nozzle MK2.5]
|
|
inherits = 0.35mm SOLUBLE FULL 0.6 nozzle MK2.5
|
|
# alias = 0.35mm SOLUBLE INTERFACE
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 80%
|
|
|
|
## MINI print profiles
|
|
|
|
# 0.4mm nozzle
|
|
|
|
[print:0.05mm ULTRADETAIL MINI]
|
|
inherits = *0.05mm*; *MINI*
|
|
# alias = 0.05mm ULTRADETAIL
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
top_infill_extrusion_width = 0.4
|
|
small_perimeter_speed = 15
|
|
perimeter_extrusion_width = 0.4
|
|
external_perimeter_extrusion_width = 0.4
|
|
|
|
[print:0.07mm ULTRADETAIL MINI]
|
|
inherits = *0.07mm*; *MINI*
|
|
# alias = 0.07mm ULTRADETAIL
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
top_infill_extrusion_width = 0.4
|
|
small_perimeter_speed = 15
|
|
perimeter_extrusion_width = 0.4
|
|
external_perimeter_extrusion_width = 0.4
|
|
|
|
[print:0.10mm DETAIL MINI]
|
|
inherits = *0.10mm*; *MINI*
|
|
# alias = 0.10mm DETAIL
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 30
|
|
infill_speed = 80
|
|
solid_infill_speed = 80
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_infill_speed = 40
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
perimeters = 3
|
|
bridge_acceleration = 1000
|
|
|
|
[print:0.15mm QUALITY MINI]
|
|
inherits = *0.15mm*; *MINI*
|
|
# alias = 0.15mm QUALITY
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 30
|
|
infill_speed = 80
|
|
solid_infill_speed = 80
|
|
top_solid_infill_speed = 40
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
bridge_flow_ratio = 0.85
|
|
|
|
[print:0.15mm SPEED MINI]
|
|
inherits = *0.15mm*; *MINI*
|
|
# alias = 0.15mm SPEED
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
perimeter_speed = 50
|
|
external_perimeter_speed = 40
|
|
infill_speed = 140
|
|
solid_infill_speed = 140
|
|
top_solid_infill_speed = 40
|
|
bridge_flow_ratio = 0.85
|
|
|
|
[print:0.20mm QUALITY MINI]
|
|
inherits = *0.20mm*; *MINI*
|
|
# alias = 0.20mm QUALITY
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 30
|
|
infill_speed = 80
|
|
solid_infill_speed = 80
|
|
top_solid_infill_speed = 40
|
|
fill_pattern = gyroid
|
|
fill_density = 15%
|
|
|
|
[print:0.20mm SPEED MINI]
|
|
inherits = *0.20mm*; *MINI*
|
|
# alias = 0.20mm SPEED
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
perimeter_speed = 50
|
|
external_perimeter_speed = 40
|
|
infill_speed = 140
|
|
max_print_speed = 150
|
|
solid_infill_speed = 140
|
|
top_solid_infill_speed = 40
|
|
|
|
[print:0.25mm DRAFT MINI]
|
|
inherits = *0.25mm*; *MINI*
|
|
# alias = 0.25mm DRAFT
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 40
|
|
infill_speed = 110
|
|
perimeter_speed = 55
|
|
small_perimeter_speed = 25
|
|
solid_infill_speed = 100
|
|
top_solid_infill_speed = 45
|
|
first_layer_extrusion_width = 0.42
|
|
infill_extrusion_width = 0.45
|
|
solid_infill_extrusion_width = 0.45
|
|
top_infill_extrusion_width = 0.4
|
|
|
|
# 0.25mm nozzle
|
|
|
|
[print:0.05mm ULTRADETAIL 0.25 nozzle MINI]
|
|
inherits = *0.05mm*; *0.25nozzle*; *MINI*
|
|
# alias = 0.05mm ULTRADETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
[print:0.07mm ULTRADETAIL 0.25 nozzle MINI]
|
|
inherits = *0.07mm*; *0.25nozzle*; *MINI*
|
|
# alias = 0.07mm ULTRADETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
|
|
infill_speed = 30
|
|
solid_infill_speed = 30
|
|
support_material_speed = 30
|
|
top_solid_infill_speed = 20
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
[print:0.10mm DETAIL 0.25 nozzle MINI]
|
|
inherits = *0.10mm*; *0.25nozzleMINI*; *MINI*
|
|
# alias = 0.10mm DETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
[print:0.15mm QUALITY 0.25 nozzle MINI]
|
|
inherits = *0.15mm*; *0.25nozzleMINI*; *MINI*
|
|
# alias = 0.15mm QUALITY
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
|
|
fill_pattern = grid
|
|
fill_density = 20%
|
|
|
|
# 0.6mm nozzle
|
|
|
|
[print:0.15mm DETAIL 0.6 nozzle MINI]
|
|
inherits = *0.15mm*; *0.6nozzleMINI*
|
|
# alias = 0.15mm DETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_speed = 70
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 70
|
|
top_solid_infill_speed = 45
|
|
infill_extrusion_width = 0.65
|
|
solid_infill_extrusion_width = 0.65
|
|
|
|
[print:0.20mm DETAIL 0.6 nozzle MINI]
|
|
inherits = *0.20mm*; *0.6nozzleMINI*
|
|
# alias = 0.20mm DETAIL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_speed = 70
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 70
|
|
top_solid_infill_speed = 45
|
|
infill_extrusion_width = 0.65
|
|
solid_infill_extrusion_width = 0.65
|
|
|
|
[print:0.30mm QUALITY 0.6 nozzle MINI]
|
|
inherits = *0.30mm*; *0.6nozzleMINI*
|
|
# alias = 0.30mm QUALITY
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_speed = 65
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 65
|
|
top_solid_infill_speed = 45
|
|
external_perimeter_extrusion_width = 0.68
|
|
perimeter_extrusion_width = 0.68
|
|
|
|
[print:0.35mm SPEED 0.6 nozzle MINI]
|
|
inherits = *0.35mm*; *0.6nozzleMINI*
|
|
# alias = 0.35mm SPEED
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_speed = 60
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 60
|
|
top_solid_infill_speed = 45
|
|
external_perimeter_extrusion_width = 0.68
|
|
perimeter_extrusion_width = 0.68
|
|
|
|
[print:0.40mm DRAFT 0.6 nozzle MINI]
|
|
inherits = *0.40mm*; *0.6nozzleMINI*
|
|
# alias = 0.40mm DRAFT
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_speed = 50
|
|
max_print_speed = 100
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 50
|
|
top_solid_infill_speed = 45
|
|
external_perimeter_extrusion_width = 0.68
|
|
perimeter_extrusion_width = 0.68
|
|
infill_extrusion_width = 0.68
|
|
solid_infill_extrusion_width = 0.68
|
|
|
|
# XXXXXXxxXXXXXXXXXXXXXX
|
|
# XXX--- filament ---XXX
|
|
# XXXXXXXXxxXXXXXXXXXXXX
|
|
|
|
[filament:*common*]
|
|
cooling = 1
|
|
compatible_printers =
|
|
# For now, all but selected filaments are disabled for the MMU 2.0
|
|
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
end_filament_gcode = "; Filament-specific end gcode"
|
|
extrusion_multiplier = 1
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_toolchange_delay = 0
|
|
filament_cooling_moves = 4
|
|
filament_cooling_initial_speed = 2.2
|
|
filament_cooling_final_speed = 3.4
|
|
filament_load_time = 0
|
|
filament_unload_time = 0
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_cost = 0
|
|
filament_density = 0
|
|
filament_diameter = 1.75
|
|
filament_notes = ""
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 20
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode"
|
|
|
|
[filament:*PLA*]
|
|
inherits = *common*
|
|
bed_temperature = 60
|
|
bridge_fan_speed = 100
|
|
disable_fan_first_layers = 1
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FF8000
|
|
filament_max_volumetric_speed = 15
|
|
filament_type = PLA
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
temperature = 210
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode"
|
|
|
|
[filament:*PET*]
|
|
inherits = *common*
|
|
bed_temperature = 90
|
|
bridge_fan_speed = 50
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 20
|
|
filament_colour = #FF8000
|
|
filament_max_volumetric_speed = 8
|
|
filament_type = PETG
|
|
first_layer_bed_temperature = 85
|
|
first_layer_temperature = 230
|
|
max_fan_speed = 50
|
|
min_fan_speed = 30
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode"
|
|
temperature = 240
|
|
filament_retract_length = 1.4
|
|
filament_retract_lift = 0.2
|
|
compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
|
|
[filament:*PET06*]
|
|
inherits = *PET*
|
|
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
filament_max_volumetric_speed = 15
|
|
|
|
[filament:*PETMMU1*]
|
|
inherits = *PET*
|
|
filament_retract_length = nil
|
|
filament_retract_speed = nil
|
|
filament_retract_lift = 0.2
|
|
compatible_printers_condition = printer_model=="MK2SMM"
|
|
|
|
[filament:*PETMINI*]
|
|
inherits = *PET*
|
|
filament_retract_length = nil
|
|
filament_retract_speed = 40
|
|
filament_deretract_speed = 25
|
|
filament_retract_lift = nil
|
|
filament_retract_before_travel = 1
|
|
filament_max_volumetric_speed = 7
|
|
compatible_printers_condition = printer_model=="MINI"
|
|
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.2{endif} ; Filament gcode"
|
|
|
|
[filament:*PETMINI06*]
|
|
inherits = *PET*
|
|
filament_retract_length = nil
|
|
filament_retract_speed = 40
|
|
filament_deretract_speed = 25
|
|
filament_retract_lift = nil
|
|
filament_retract_before_travel = 1
|
|
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.6
|
|
start_filament_gcode = "M900 K0.12 ; Filament gcode"
|
|
filament_max_volumetric_speed = 13
|
|
|
|
[filament:*ABSMINI*]
|
|
inherits = *ABS*
|
|
bed_temperature = 100
|
|
filament_retract_length = 2.7
|
|
filament_retract_speed = nil
|
|
filament_deretract_speed = nil
|
|
filament_retract_lift = nil
|
|
filament_retract_before_travel = 3
|
|
filament_wipe = 0
|
|
filament_max_volumetric_speed = 10
|
|
compatible_printers_condition = printer_model=="MINI"
|
|
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.2{endif} ; Filament gcode"
|
|
|
|
[filament:*FLEXMINI*]
|
|
inherits = *FLEX*
|
|
first_layer_temperature = 245
|
|
temperature = 245
|
|
filament_retract_length = 4
|
|
filament_retract_speed = 40
|
|
filament_deretract_speed = 15
|
|
filament_retract_lift = 0
|
|
filament_retract_before_travel = 5
|
|
filament_wipe = 0
|
|
bridge_fan_speed = 80
|
|
fan_always_on = 1
|
|
cooling = 0
|
|
max_fan_speed = 50
|
|
min_fan_speed = 50
|
|
filament_max_volumetric_speed = 1.35
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
|
|
disable_fan_first_layers = 4
|
|
extrusion_multiplier = 1.15
|
|
filament_density = 1.22
|
|
filament_colour = #F2F200
|
|
start_filament_gcode = "M900 K0 ; Filament gcode"
|
|
|
|
[filament:*ABS*]
|
|
inherits = *common*
|
|
bed_temperature = 110
|
|
bridge_fan_speed = 30
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 20
|
|
filament_colour = #3A80CA
|
|
filament_max_volumetric_speed = 11
|
|
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_type = ABS
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 255
|
|
max_fan_speed = 30
|
|
min_fan_speed = 20
|
|
temperature = 255
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode"
|
|
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
|
|
[filament:*FLEX*]
|
|
inherits = *common*
|
|
bed_temperature = 50
|
|
bridge_fan_speed = 80
|
|
# For now, all but selected filaments are disabled for the MMU 2.0
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
extrusion_multiplier = 1.2
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 100
|
|
filament_colour = #008000
|
|
filament_max_volumetric_speed = 1.5
|
|
filament_type = FLEX
|
|
first_layer_bed_temperature = 50
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 90
|
|
min_fan_speed = 70
|
|
start_filament_gcode = "M900 K0"; Filament gcode"
|
|
temperature = 240
|
|
filament_retract_length = 0.8
|
|
filament_deretract_speed = 25
|
|
filament_retract_lift = 0
|
|
filament_wipe = 0
|
|
|
|
[filament:ColorFabb bronzeFill]
|
|
inherits = *PLA*
|
|
filament_vendor = ColorFabb
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 72.89
|
|
filament_density = 3.9
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 9
|
|
|
|
[filament:ColorFabb steelFill]
|
|
inherits = *PLA*
|
|
filament_vendor = ColorFabb
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 72.89
|
|
filament_density = 3.13
|
|
filament_colour = #808080
|
|
filament_max_volumetric_speed = 8
|
|
|
|
[filament:ColorFabb copperFill]
|
|
inherits = *PLA*
|
|
filament_vendor = ColorFabb
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 72.89
|
|
filament_density = 3.9
|
|
filament_colour = #82603E
|
|
filament_max_volumetric_speed = 9
|
|
|
|
[filament:ColorFabb HT]
|
|
inherits = *PET*
|
|
filament_vendor = ColorFabb
|
|
bed_temperature = 110
|
|
bridge_fan_speed = 30
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_cost = 65.66
|
|
filament_density = 1.18
|
|
first_layer_bed_temperature = 105
|
|
first_layer_temperature = 270
|
|
max_fan_speed = 20
|
|
min_fan_speed = 10
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb PLA-PHA]
|
|
inherits = *PLA*
|
|
filament_vendor = ColorFabb
|
|
filament_cost = 52.46
|
|
filament_density = 1.24
|
|
|
|
[filament:ColorFabb woodFill]
|
|
inherits = *PLA*
|
|
filament_vendor = ColorFabb
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 58.30
|
|
filament_density = 1.15
|
|
filament_colour = #dfc287
|
|
filament_max_volumetric_speed = 9
|
|
first_layer_temperature = 200
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 200
|
|
|
|
[filament:ColorFabb corkFill]
|
|
inherits = *PLA*
|
|
filament_vendor = ColorFabb
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 58.30
|
|
filament_density = 1.18
|
|
filament_colour = #634d33
|
|
filament_max_volumetric_speed = 6
|
|
first_layer_temperature = 220
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 220
|
|
|
|
[filament:ColorFabb XT]
|
|
inherits = *PET*
|
|
filament_vendor = ColorFabb
|
|
filament_cost = 58.30
|
|
filament_density = 1.27
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb XT-CF20]
|
|
inherits = *PET*
|
|
filament_vendor = ColorFabb
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 72.89
|
|
filament_density = 1.35
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 1
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
temperature = 260
|
|
filament_retract_length = nil
|
|
filament_retract_lift = 0.2
|
|
|
|
[filament:ColorFabb nGen]
|
|
inherits = *PET*
|
|
filament_vendor = ColorFabb
|
|
filament_cost = 52.46
|
|
filament_density = 1.2
|
|
bridge_fan_speed = 40
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_type = NGEN
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 35
|
|
min_fan_speed = 20
|
|
|
|
[filament:ColorFabb nGen flex]
|
|
inherits = *FLEX*
|
|
filament_vendor = ColorFabb
|
|
filament_cost = 58.30
|
|
filament_density = 1
|
|
bed_temperature = 85
|
|
bridge_fan_speed = 40
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
extrusion_multiplier = 1
|
|
fan_below_layer_time = 10
|
|
filament_max_volumetric_speed = 5
|
|
first_layer_bed_temperature = 85
|
|
first_layer_temperature = 260
|
|
max_fan_speed = 35
|
|
min_fan_speed = 20
|
|
temperature = 260
|
|
filament_retract_length = nil
|
|
filament_retract_lift = 0
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
|
|
|
[filament:E3D Edge]
|
|
inherits = *PET*
|
|
filament_vendor = E3D
|
|
filament_cost = 56.9
|
|
filament_density = 1.26
|
|
filament_type = EDGE
|
|
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
|
|
[filament:E3D PC-ABS]
|
|
inherits = *ABS*
|
|
filament_vendor = E3D
|
|
filament_cost = 0
|
|
filament_type = PC
|
|
filament_density = 1.05
|
|
first_layer_temperature = 270
|
|
temperature = 270
|
|
|
|
[filament:Fillamentum PLA]
|
|
inherits = *PLA*
|
|
filament_vendor = Fillamentum
|
|
filament_cost = 25.4
|
|
filament_density = 1.24
|
|
|
|
[filament:Fillamentum ABS]
|
|
inherits = *ABS*
|
|
filament_vendor = Fillamentum
|
|
filament_cost = 32.4
|
|
filament_density = 1.04
|
|
first_layer_temperature = 240
|
|
temperature = 240
|
|
|
|
[filament:Fillamentum ASA]
|
|
inherits = *ABS*
|
|
filament_vendor = Fillamentum
|
|
filament_cost = 38.7
|
|
filament_density = 1.07
|
|
fan_always_on = 1
|
|
cooling = 1
|
|
min_fan_speed = 20
|
|
max_fan_speed = 20
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 15
|
|
first_layer_temperature = 265
|
|
temperature = 265
|
|
filament_type = ASA
|
|
|
|
[filament:Prusament ASA]
|
|
inherits = *ABS*
|
|
filament_vendor = Prusa Research
|
|
filament_cost = 35.28
|
|
filament_density = 1.07
|
|
fan_always_on = 1
|
|
first_layer_temperature = 260
|
|
first_layer_bed_temperature = 105
|
|
temperature = 260
|
|
bed_temperature = 110
|
|
cooling = 1
|
|
min_fan_speed = 20
|
|
max_fan_speed = 20
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 15
|
|
disable_fan_first_layers = 4
|
|
filament_type = ASA
|
|
filament_colour = #FFF2EC
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}12{else}20{endif} ; Filament gcode"
|
|
|
|
[filament:Fillamentum CPE]
|
|
inherits = *PET*
|
|
filament_vendor = Fillamentum
|
|
filament_cost = 54.1
|
|
filament_density = 1.25
|
|
filament_type = CPE
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 275
|
|
max_fan_speed = 50
|
|
min_fan_speed = 50
|
|
temperature = 275
|
|
|
|
[filament:Fillamentum Timberfill]
|
|
inherits = *PLA*
|
|
filament_vendor = Fillamentum
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 68
|
|
filament_density = 1.15
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 10
|
|
first_layer_temperature = 190
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 190
|
|
|
|
[filament:Generic ABS]
|
|
inherits = *ABS*
|
|
filament_vendor = Generic
|
|
filament_cost = 27.82
|
|
filament_density = 1.04
|
|
filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS"
|
|
|
|
[filament:Generic PET]
|
|
inherits = *PET*
|
|
filament_vendor = Generic
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
|
|
|
|
[filament:Generic PLA]
|
|
inherits = *PLA*
|
|
filament_vendor = Generic
|
|
filament_cost = 25.4
|
|
filament_density = 1.24
|
|
filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
|
|
|
[filament:Generic FLEX]
|
|
inherits = *FLEX*
|
|
filament_vendor = Generic
|
|
filament_cost = 82
|
|
filament_density = 1.22
|
|
filament_max_volumetric_speed = 1.2
|
|
filament_retract_length = 0
|
|
filament_retract_speed = nil
|
|
filament_retract_lift = nil
|
|
|
|
[filament:SainSmart TPU]
|
|
inherits = *FLEX*
|
|
filament_vendor = SainSmart
|
|
fan_always_on = 1
|
|
filament_max_volumetric_speed = 2.5
|
|
extrusion_multiplier = 1.15
|
|
first_layer_temperature = 230
|
|
first_layer_bed_temperature = 50
|
|
temperature = 230
|
|
bed_temperature = 50
|
|
bridge_fan_speed = 100
|
|
max_fan_speed = 80
|
|
min_fan_speed = 80
|
|
filament_retract_before_travel = 3
|
|
filament_cost = 32.99
|
|
filament_density = 1.21
|
|
filament_retract_length = 1
|
|
filament_retract_speed = nil
|
|
filament_deretract_speed = 25
|
|
filament_retract_lift = 0
|
|
filament_wipe = 0
|
|
disable_fan_first_layers = 3
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 10
|
|
cooling = 1
|
|
|
|
[filament:Filatech FilaFlex40]
|
|
inherits = *FLEX*
|
|
filament_vendor = Filatech
|
|
fan_always_on = 1
|
|
filament_max_volumetric_speed = 2.5
|
|
extrusion_multiplier = 1.15
|
|
first_layer_temperature = 230
|
|
first_layer_bed_temperature = 50
|
|
temperature = 230
|
|
bed_temperature = 50
|
|
bridge_fan_speed = 100
|
|
max_fan_speed = 50
|
|
min_fan_speed = 50
|
|
filament_retract_before_travel = 3
|
|
filament_cost = 51.45
|
|
filament_density = 1.22
|
|
filament_retract_length = 2
|
|
filament_retract_speed = 50
|
|
filament_deretract_speed = 25
|
|
filament_retract_lift = 0
|
|
filament_wipe = 0
|
|
disable_fan_first_layers = 3
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 10
|
|
cooling = 1
|
|
|
|
[filament:Polymaker PC-Max]
|
|
inherits = *ABS*
|
|
filament_vendor = Polymaker
|
|
filament_cost = 77.3
|
|
filament_density = 1.20
|
|
filament_type = PC
|
|
bed_temperature = 115
|
|
filament_colour = #3A80CA
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 270
|
|
temperature = 270
|
|
bridge_fan_speed = 0
|
|
|
|
[filament:PrimaSelect PVA+]
|
|
inherits = *PLA*
|
|
filament_vendor = PrimaSelect
|
|
filament_cost = 108
|
|
filament_density = 1.23
|
|
cooling = 0
|
|
fan_always_on = 0
|
|
filament_colour = #FFFFD7
|
|
filament_max_volumetric_speed = 3.8
|
|
filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'"
|
|
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_soluble = 1
|
|
filament_type = PVA
|
|
first_layer_temperature = 195
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 195
|
|
|
|
[filament:Prusa ABS]
|
|
inherits = *ABS*
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.82
|
|
filament_density = 1.08
|
|
filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS"
|
|
|
|
[filament:*ABS MMU2*]
|
|
inherits = Prusa ABS
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
filament_cooling_final_speed = 50
|
|
filament_cooling_initial_speed = 10
|
|
filament_cooling_moves = 5
|
|
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
|
|
filament_loading_speed_start = 19
|
|
filament_load_time = 15
|
|
filament_unload_time = 12
|
|
filament_loading_speed = 14
|
|
filament_unloading_speed = 20
|
|
|
|
[filament:Generic ABS MMU2]
|
|
inherits = *ABS MMU2*
|
|
# alias = Generic ABS
|
|
filament_vendor = Generic
|
|
|
|
[filament:Prusament ASA MMU2]
|
|
inherits = *ABS MMU2*
|
|
# alias = Prusament ASA
|
|
filament_vendor = Prusa Research
|
|
filament_cost = 35.28
|
|
filament_density = 1.07
|
|
fan_always_on = 1
|
|
first_layer_temperature = 260
|
|
first_layer_bed_temperature = 105
|
|
temperature = 260
|
|
bed_temperature = 110
|
|
cooling = 1
|
|
min_fan_speed = 20
|
|
max_fan_speed = 20
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 15
|
|
disable_fan_first_layers = 4
|
|
filament_cooling_final_speed = 2
|
|
filament_cooling_initial_speed = 3
|
|
filament_cooling_moves = 1
|
|
filament_type = ASA
|
|
filament_colour = #FFF2EC
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}12{else}20{endif} ; Filament gcode"
|
|
|
|
[filament:Prusa ABS MMU2]
|
|
inherits = *ABS MMU2*
|
|
# alias = Prusa ABS
|
|
filament_vendor = Made for Prusa
|
|
|
|
[filament:Prusa HIPS]
|
|
inherits = *ABS*
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.3
|
|
filament_density = 1.04
|
|
bridge_fan_speed = 50
|
|
cooling = 1
|
|
extrusion_multiplier = 0.9
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 10
|
|
filament_colour = #FFFFD7
|
|
filament_soluble = 1
|
|
filament_type = HIPS
|
|
first_layer_temperature = 220
|
|
max_fan_speed = 20
|
|
min_fan_speed = 20
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 220
|
|
|
|
[filament:Prusa PET]
|
|
inherits = *PET*
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
|
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
|
|
[filament:Prusament PETG]
|
|
inherits = *PET*
|
|
filament_vendor = Prusa Research
|
|
first_layer_temperature = 240
|
|
temperature = 250
|
|
filament_cost = 24.99
|
|
filament_density = 1.27
|
|
filament_type = PETG
|
|
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
|
|
[filament:Prusa PET 0.6 nozzle]
|
|
inherits = *PET06*
|
|
# alias = Prusa PET
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
|
|
|
[filament:Prusament PETG 0.6 nozzle]
|
|
inherits = *PET06*
|
|
# alias = Prusament PETG
|
|
filament_vendor = Prusa Research
|
|
first_layer_temperature = 240
|
|
temperature = 250
|
|
filament_cost = 24.99
|
|
filament_density = 1.27
|
|
filament_type = PETG
|
|
|
|
[filament:*PET MMU2*]
|
|
inherits = Prusa PET
|
|
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
temperature = 230
|
|
first_layer_temperature = 230
|
|
filament_cooling_final_speed = 1
|
|
filament_cooling_initial_speed = 2
|
|
filament_cooling_moves = 1
|
|
filament_load_time = 15
|
|
filament_loading_speed = 14
|
|
filament_notes = PET
|
|
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_unload_time = 12
|
|
filament_unloading_speed = 20
|
|
filament_unloading_speed_start = 120
|
|
filament_loading_speed_start = 19
|
|
filament_retract_length = 1.4
|
|
filament_retract_lift = 0.2
|
|
|
|
[filament:*PET MMU2 06*]
|
|
inherits = *PET MMU2*
|
|
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
filament_max_volumetric_speed = 13
|
|
|
|
[filament:Generic PET MMU2]
|
|
inherits = *PET MMU2*
|
|
# alias = Generic PET
|
|
filament_vendor = Generic
|
|
|
|
[filament:Prusa PET MMU2]
|
|
inherits = *PET MMU2*
|
|
# alias = Prusa PET
|
|
filament_vendor = Made for Prusa
|
|
|
|
[filament:Prusament PETG MMU2]
|
|
inherits = *PET MMU2*
|
|
filament_type = PETG
|
|
# alias = Prusament PETG
|
|
filament_vendor = Prusa Research
|
|
|
|
[filament:Generic PET MMU2 0.6 nozzle]
|
|
inherits = *PET MMU2 06*
|
|
# alias = Generic PET
|
|
filament_vendor = Generic
|
|
|
|
[filament:Prusa PET MMU2 0.6 nozzle]
|
|
inherits = *PET MMU2 06*
|
|
# alias = Prusa PET
|
|
filament_vendor = Made for Prusa
|
|
|
|
[filament:Prusament PETG MMU2 0.6 nozzle]
|
|
inherits = *PET MMU2 06*
|
|
filament_type = PETG
|
|
# alias = Prusament PETG
|
|
filament_vendor = Prusa Research
|
|
|
|
[filament:Prusa PLA]
|
|
inherits = *PLA*
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 25.4
|
|
filament_density = 1.24
|
|
filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFiberlogy PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nAmazonBasics PLA"
|
|
|
|
[filament:Prusament PLA]
|
|
inherits = *PLA*
|
|
filament_vendor = Prusa Research
|
|
temperature = 215
|
|
filament_cost = 24.99
|
|
filament_density = 1.24
|
|
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
|
|
|
|
[filament:*PLA MMU2*]
|
|
inherits = Prusa PLA
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
temperature = 205
|
|
filament_cooling_final_speed = 2
|
|
filament_cooling_initial_speed = 3
|
|
filament_cooling_moves = 1
|
|
filament_load_time = 15
|
|
filament_loading_speed = 14
|
|
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_unload_time = 12
|
|
filament_unloading_speed = 20
|
|
filament_loading_speed_start = 19
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_unloading_speed_start = 100
|
|
|
|
[filament:Generic PLA MMU2]
|
|
inherits = *PLA MMU2*
|
|
# alias = Generic PLA
|
|
filament_vendor = Generic
|
|
|
|
[filament:Prusa PLA MMU2]
|
|
inherits = *PLA MMU2*
|
|
# alias = Prusa PLA
|
|
filament_vendor = Made for Prusa
|
|
|
|
[filament:Prusament PLA MMU2]
|
|
inherits = *PLA MMU2*
|
|
# alias = Prusament PLA
|
|
filament_vendor = Prusa Research
|
|
|
|
[filament:SemiFlex or Flexfill 98A]
|
|
inherits = *FLEX*
|
|
filament_vendor = Generic
|
|
filament_cost = 82
|
|
filament_density = 1.22
|
|
filament_max_volumetric_speed = 1.35
|
|
|
|
[filament:Taulman Bridge]
|
|
inherits = *common*
|
|
filament_vendor = Taulman
|
|
filament_cost = 40
|
|
filament_density = 1.13
|
|
bed_temperature = 90
|
|
bridge_fan_speed = 40
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 20
|
|
filament_colour = #DEE0E6
|
|
filament_max_volumetric_speed = 10
|
|
filament_soluble = 0
|
|
filament_type = NYLON
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 5
|
|
min_fan_speed = 0
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 250
|
|
|
|
[filament:Taulman T-Glase]
|
|
inherits = *PET*
|
|
filament_vendor = Taulman
|
|
filament_cost = 40
|
|
filament_density = 1.27
|
|
bridge_fan_speed = 40
|
|
cooling = 0
|
|
fan_always_on = 0
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 5
|
|
min_fan_speed = 0
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
|
|
[filament:Verbatim PLA]
|
|
inherits = *PLA*
|
|
filament_vendor = Verbatim
|
|
filament_cost = 42.99
|
|
filament_density = 1.24
|
|
|
|
[filament:Verbatim BVOH]
|
|
inherits = *common*
|
|
filament_vendor = Verbatim
|
|
filament_cost = 218
|
|
filament_density = 1.23
|
|
bed_temperature = 60
|
|
bridge_fan_speed = 100
|
|
cooling = 0
|
|
disable_fan_first_layers = 1
|
|
extrusion_multiplier = 1
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FFFFD7
|
|
filament_max_volumetric_speed = 4
|
|
filament_notes = "List of materials tested with standard PVA print settings:\n\nVerbatim BVOH"
|
|
filament_soluble = 1
|
|
filament_type = PVA
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 210
|
|
|
|
[filament:Verbatim BVOH MMU2]
|
|
inherits = Verbatim BVOH
|
|
# alias = Verbatim BVOH
|
|
filament_vendor = Verbatim
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
temperature = 195
|
|
fan_always_on = 1
|
|
first_layer_temperature = 200
|
|
filament_cooling_final_speed = 1
|
|
filament_cooling_initial_speed = 2
|
|
filament_max_volumetric_speed = 4
|
|
filament_type = PVA
|
|
filament_cooling_moves = 1
|
|
filament_load_time = 15
|
|
filament_loading_speed = 14
|
|
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_unload_time = 12
|
|
filament_unloading_speed = 20
|
|
filament_unloading_speed_start = 100
|
|
filament_loading_speed_start = 19
|
|
|
|
[filament:PrimaSelect PVA+ MMU2]
|
|
inherits = *common*
|
|
# alias = PrimaSelect PVA+
|
|
filament_vendor = PrimaSelect
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
bed_temperature = 60
|
|
bridge_fan_speed = 100
|
|
cooling = 0
|
|
disable_fan_first_layers = 1
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FFFFD7
|
|
filament_cooling_final_speed = 2
|
|
filament_cooling_initial_speed = 4
|
|
filament_cooling_moves = 2
|
|
filament_cost = 25.4
|
|
filament_density = 1.24
|
|
filament_diameter = 1.75
|
|
filament_load_time = 15
|
|
filament_loading_speed = 14
|
|
filament_loading_speed_start = 19
|
|
filament_max_volumetric_speed = 3.8
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = "List of materials tested with standard PVA print settings:\n\nPrimaSelect PVA+"
|
|
filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6"
|
|
filament_soluble = 1
|
|
filament_toolchange_delay = 0
|
|
filament_type = PVA
|
|
filament_unload_time = 12
|
|
filament_unloading_speed = 20
|
|
filament_unloading_speed_start = 100
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 200
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 20
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
temperature = 195
|
|
|
|
[filament:Verbatim PP]
|
|
inherits = *common*
|
|
filament_vendor = Verbatim
|
|
filament_cost = 72
|
|
filament_density = 0.89
|
|
bed_temperature = 100
|
|
bridge_fan_speed = 100
|
|
cooling = 1
|
|
disable_fan_first_layers = 2
|
|
extrusion_multiplier = 1
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 100
|
|
filament_colour = #DEE0E6
|
|
filament_max_volumetric_speed = 5
|
|
filament_notes = "List of materials tested with standard PLA print settings:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
|
|
filament_type = PP
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 220
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}0{else}10{endif}; Filament gcode"
|
|
temperature = 220
|
|
|
|
## Filaments MMU1
|
|
|
|
[filament:ColorFabb HT MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = ColorFabb HT
|
|
filament_vendor = ColorFabb
|
|
bed_temperature = 110
|
|
bridge_fan_speed = 30
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_cost = 58.66
|
|
filament_density = 1.18
|
|
first_layer_bed_temperature = 105
|
|
first_layer_temperature = 270
|
|
max_fan_speed = 20
|
|
min_fan_speed = 10
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb XT MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = ColorFabb XT
|
|
filament_vendor = ColorFabb
|
|
filament_type = PETG
|
|
filament_cost = 62.9
|
|
filament_density = 1.27
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb XT-CF20 MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = ColorFabb XT-CF20
|
|
filament_vendor = ColorFabb
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MK2SMM"
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 80.65
|
|
filament_density = 1.35
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 1
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
temperature = 260
|
|
|
|
[filament:ColorFabb nGen MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = ColorFabb nGen
|
|
filament_vendor = ColorFabb
|
|
filament_cost = 21.2
|
|
filament_density = 1.2
|
|
bridge_fan_speed = 40
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_type = NGEN
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 35
|
|
min_fan_speed = 20
|
|
|
|
[filament:E3D Edge MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = E3D Edge
|
|
filament_vendor = E3D
|
|
filament_cost = 56.9
|
|
filament_density = 1.26
|
|
filament_type = EDGE
|
|
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
|
|
|
|
[filament:Fillamentum CPE MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = Fillamentum CPE
|
|
filament_vendor = Fillamentum
|
|
filament_cost = 54.1
|
|
filament_density = 1.25
|
|
filament_type = CPE
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 275
|
|
max_fan_speed = 50
|
|
min_fan_speed = 50
|
|
temperature = 275
|
|
|
|
[filament:Generic PET MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = Generic PET
|
|
filament_vendor = Generic
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
|
|
|
|
[filament:Prusa PET MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = Prusa PET
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
|
|
|
[filament:Prusament PETG MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = Prusament PETG
|
|
filament_vendor = Prusa Research
|
|
first_layer_temperature = 240
|
|
temperature = 250
|
|
filament_cost = 24.99
|
|
filament_density = 1.27
|
|
filament_type = PETG
|
|
|
|
[filament:Taulman T-Glase MMU1]
|
|
inherits = *PETMMU1*
|
|
# alias = Taulman T-Glase
|
|
filament_vendor = Taulman
|
|
filament_cost = 40
|
|
filament_density = 1.27
|
|
bridge_fan_speed = 40
|
|
cooling = 0
|
|
fan_always_on = 0
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 5
|
|
min_fan_speed = 0
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
|
|
[filament:SemiFlex or Flexfill 98A MMU1]
|
|
inherits = *FLEX*
|
|
# alias = SemiFlex or Flexfill 98A
|
|
filament_vendor = Generic
|
|
filament_cost = 82
|
|
filament_density = 1.22
|
|
filament_max_volumetric_speed = 1.35
|
|
filament_retract_length = nil
|
|
filament_retract_speed = nil
|
|
filament_retract_lift = nil
|
|
compatible_printers_condition = printer_model=="MK2SMM"
|
|
|
|
[filament:Generic FLEX MMU1]
|
|
inherits = *FLEX*
|
|
# alias = Generic FLEX
|
|
filament_vendor = Generic
|
|
filament_cost = 82
|
|
filament_density = 1.22
|
|
filament_max_volumetric_speed = 1.2
|
|
filament_retract_length = 0
|
|
filament_retract_speed = nil
|
|
filament_retract_lift = nil
|
|
compatible_printers_condition = printer_model=="MK2SMM"
|
|
|
|
## Filaments MINI
|
|
|
|
[filament:Generic PET MINI]
|
|
inherits = Generic PET; *PETMINI*
|
|
# alias = Generic PET
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
|
|
|
|
[filament:Generic ABS MINI]
|
|
inherits = Generic ABS; *ABSMINI*
|
|
# alias = Generic ABS
|
|
filament_cost = 27.82
|
|
filament_density = 1.08
|
|
|
|
[filament:Prusament PETG MINI]
|
|
inherits = Prusament PETG; *PETMINI*
|
|
# alias = Prusament PETG
|
|
first_layer_temperature = 240
|
|
temperature = 250
|
|
filament_density = 1.27
|
|
filament_cost = 24.99
|
|
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
|
|
|
|
[filament:Prusament PETG 0.6 nozzle MINI]
|
|
inherits = Prusament PETG; *PETMINI06*
|
|
# alias = Prusament PETG
|
|
first_layer_temperature = 240
|
|
temperature = 250
|
|
filament_density = 1.27
|
|
filament_cost = 24.99
|
|
|
|
[filament:Generic PET 0.6 nozzle MINI]
|
|
inherits = Generic PET; *PETMINI06*
|
|
# alias = Generic PET
|
|
|
|
[filament:Prusament ASA MINI]
|
|
inherits = Prusament ASA; *ABSMINI*
|
|
# alias = Prusament ASA
|
|
first_layer_temperature = 260
|
|
first_layer_bed_temperature = 100
|
|
temperature = 260
|
|
bed_temperature = 100
|
|
fan_always_on = 1
|
|
cooling = 1
|
|
min_fan_speed = 20
|
|
max_fan_speed = 20
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 15
|
|
disable_fan_first_layers = 4
|
|
filament_type = ASA
|
|
filament_colour = #FFF2EC
|
|
filament_cost = 35.28
|
|
filament_density = 1.07
|
|
|
|
[filament:Fillamentum Flexfill 98A MINI]
|
|
inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
|
|
# alias = Fillamentum Flexfill 98A
|
|
filament_vendor = Fillamentum
|
|
first_layer_temperature = 240
|
|
temperature = 240
|
|
filament_max_volumetric_speed = 1.35
|
|
|
|
[filament:Generic FLEX MINI]
|
|
inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
|
|
# alias = Generic FLEX
|
|
filament_vendor = Generic
|
|
first_layer_temperature = 240
|
|
temperature = 240
|
|
fan_always_on = 0
|
|
bridge_fan_speed = 80
|
|
filament_retract_length = 3
|
|
filament_max_volumetric_speed = 1.35
|
|
|
|
[filament:AmazonBasics TPU MINI]
|
|
inherits = *FLEXMINI*
|
|
# alias = AmazonBasics TPU
|
|
filament_vendor = AmazonBasics
|
|
filament_max_volumetric_speed = 1.5
|
|
first_layer_temperature = 235
|
|
first_layer_bed_temperature = 50
|
|
temperature = 235
|
|
bed_temperature = 50
|
|
bridge_fan_speed = 100
|
|
max_fan_speed = 80
|
|
min_fan_speed = 80
|
|
filament_retract_before_travel = 5
|
|
filament_cost = 19.99
|
|
filament_density = 1.21
|
|
|
|
[filament:SainSmart TPU MINI]
|
|
inherits = *FLEXMINI*
|
|
# alias = SainSmart TPU
|
|
filament_vendor = SainSmart
|
|
filament_max_volumetric_speed = 1.8
|
|
first_layer_temperature = 235
|
|
first_layer_bed_temperature = 50
|
|
temperature = 235
|
|
bed_temperature = 50
|
|
bridge_fan_speed = 100
|
|
max_fan_speed = 80
|
|
min_fan_speed = 80
|
|
filament_retract_before_travel = 5
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 10
|
|
cooling = 1
|
|
filament_cost = 32.99
|
|
filament_density = 1.21
|
|
|
|
[filament:Filatech FilaFlex40 MINI]
|
|
inherits = *FLEXMINI*
|
|
# alias = Filatech FilaFlex40
|
|
filament_vendor = Filatech
|
|
filament_max_volumetric_speed = 1.8
|
|
fan_always_on = 1
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature = 55
|
|
temperature = 240
|
|
bed_temperature = 55
|
|
filament_retract_length = 4
|
|
filament_retract_before_travel = 5
|
|
bridge_fan_speed = 80
|
|
max_fan_speed = 50
|
|
min_fan_speed = 50
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 10
|
|
cooling = 1
|
|
filament_cost = 51.45
|
|
|
|
[filament:Fillamentum Flexfill 92A MINI]
|
|
inherits = *FLEXMINI*
|
|
# alias = Fillamentum Flexfill 92A
|
|
filament_vendor = Fillamentum
|
|
first_layer_temperature = 245
|
|
temperature = 245
|
|
filament_retract_length = 3
|
|
filament_retract_speed = 40
|
|
filament_deretract_speed = 15
|
|
filament_retract_lift = 0
|
|
filament_retract_before_travel = 7
|
|
filament_wipe = 0
|
|
filament_density = 1.20
|
|
filament_cost = 33.95
|
|
bridge_fan_speed = 70
|
|
fan_always_on = 1
|
|
cooling = 0
|
|
max_fan_speed = 50
|
|
min_fan_speed = 50
|
|
filament_max_volumetric_speed = 1.2
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
|
|
disable_fan_first_layers = 4
|
|
extrusion_multiplier = 1.2
|
|
start_filament_gcode = "M900 K0 ; Filament gcode"
|
|
|
|
[filament:Fillamentum CPE MINI]
|
|
inherits = Fillamentum CPE; *PETMINI*
|
|
# alias = Fillamentum CPE
|
|
first_layer_temperature = 265
|
|
first_layer_bed_temperature = 90
|
|
temperature = 265
|
|
filament_type = CPE
|
|
filament_cost = 54.1
|
|
filament_density = 1.25
|
|
|
|
[filament:ColorFabb nGen MINI]
|
|
inherits = ColorFabb nGen; *PETMINI*
|
|
# alias = ColorFabb nGen
|
|
filament_cost = 52.46
|
|
filament_density = 1.2
|
|
|
|
[filament:E3D PC-ABS MINI]
|
|
inherits = E3D PC-ABS; *ABSMINI*
|
|
# alias = E3D PC-ABS
|
|
filament_density = 1.05
|
|
filament_cost = 28.80
|
|
|
|
[filament:Fillamentum ABS MINI]
|
|
inherits = Fillamentum ABS; *ABSMINI*
|
|
# alias = Fillamentum ABS
|
|
filament_cost = 32.4
|
|
filament_density = 1.04
|
|
|
|
[filament:Fillamentum ASA MINI]
|
|
inherits = Fillamentum ASA; *ABSMINI*
|
|
# alias = Fillamentum ASA
|
|
first_layer_temperature = 255
|
|
first_layer_bed_temperature = 100
|
|
temperature = 255
|
|
bed_temperature = 100
|
|
fan_always_on = 1
|
|
cooling = 1
|
|
min_fan_speed = 20
|
|
max_fan_speed = 20
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 15
|
|
disable_fan_first_layers = 4
|
|
filament_type = ASA
|
|
filament_colour = #FFF2EC
|
|
filament_cost = 38.7
|
|
filament_density = 1.07
|
|
|
|
[filament:Polymaker PC-Max MINI]
|
|
inherits = Polymaker PC-Max; *ABSMINI*
|
|
# alias = Polymaker PC-Max
|
|
filament_type = PC
|
|
bed_temperature = 100
|
|
filament_colour = #3A80CA
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 270
|
|
temperature = 270
|
|
bridge_fan_speed = 0
|
|
filament_cost = 77.3
|
|
filament_density = 1.20
|
|
|
|
[filament:Prusa ABS MINI]
|
|
inherits = *ABSMINI*
|
|
# alias = Prusa ABS
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.82
|
|
filament_density = 1.08
|
|
|
|
[filament:Generic HIPS MINI]
|
|
inherits = *ABSMINI*
|
|
# alias = Generic HIPS
|
|
filament_vendor = Generic
|
|
filament_cost = 27.3
|
|
filament_density = 1.04
|
|
bridge_fan_speed = 50
|
|
cooling = 1
|
|
extrusion_multiplier = 0.9
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 10
|
|
filament_colour = #FFFFD7
|
|
filament_soluble = 1
|
|
filament_type = HIPS
|
|
first_layer_temperature = 230
|
|
max_fan_speed = 20
|
|
min_fan_speed = 20
|
|
temperature = 230
|
|
|
|
[filament:ColorFabb HT MINI]
|
|
inherits = *PETMINI*
|
|
# alias = ColorFabb HT
|
|
filament_vendor = ColorFabb
|
|
bed_temperature = 100
|
|
bridge_fan_speed = 30
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_cost = 58.66
|
|
filament_density = 1.18
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 270
|
|
max_fan_speed = 20
|
|
min_fan_speed = 10
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb XT MINI]
|
|
inherits = *PETMINI*
|
|
# alias = ColorFabb XT
|
|
filament_vendor = ColorFabb
|
|
filament_type = PETG
|
|
filament_cost = 62.9
|
|
filament_density = 1.27
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb XT-CF20 MINI]
|
|
inherits = *PETMINI*
|
|
# alias = ColorFabb XT-CF20
|
|
filament_vendor = ColorFabb
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 80.65
|
|
filament_density = 1.35
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 1
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
temperature = 260
|
|
|
|
[filament:Taulman T-Glase MINI]
|
|
inherits = *PETMINI*
|
|
# alias = Taulman T-Glase
|
|
filament_vendor = Taulman
|
|
filament_cost = 40
|
|
filament_density = 1.27
|
|
bridge_fan_speed = 40
|
|
cooling = 0
|
|
fan_always_on = 0
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 5
|
|
min_fan_speed = 0
|
|
|
|
[filament:E3D Edge MINI]
|
|
inherits = *PETMINI*
|
|
# alias = E3D Edge
|
|
filament_vendor = E3D
|
|
filament_cost = 56.9
|
|
filament_density = 1.26
|
|
filament_type = EDGE
|
|
|
|
[filament:Prusa PET MINI]
|
|
inherits = *PETMINI*
|
|
# alias = Prusa PET
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6
|
|
|
|
[filament:Prusa PET 0.6 nozzle MINI]
|
|
inherits = *PETMINI06*
|
|
# alias = Prusa PET
|
|
filament_vendor = Made for Prusa
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
|
|
[sla_print:*common*]
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
|
|
layer_height = 0.05
|
|
output_filename_format = [input_filename_base].sl1
|
|
pad_edge_radius = 0.5
|
|
pad_enable = 1
|
|
pad_max_merge_distance = 50
|
|
pad_wall_height = 0
|
|
pad_wall_thickness = 1
|
|
pad_wall_slope = 90
|
|
slice_closing_radius = 0.005
|
|
support_base_diameter = 3
|
|
support_base_height = 1
|
|
support_critical_angle = 45
|
|
support_density_at_45 = 250
|
|
support_density_at_horizontal = 500
|
|
support_head_front_diameter = 0.4
|
|
support_head_penetration = 0.4
|
|
support_head_width = 3
|
|
support_max_bridge_length = 10
|
|
support_minimal_z = 0
|
|
support_object_elevation = 5
|
|
support_pillar_diameter = 1
|
|
support_pillar_connection_mode = zigzag
|
|
support_pillar_widening_factor = 0
|
|
supports_enable = 1
|
|
|
|
[sla_print:0.025 UltraDetail]
|
|
inherits = *common*
|
|
layer_height = 0.025
|
|
support_head_width = 2
|
|
|
|
[sla_print:0.035 Detail]
|
|
inherits = *common*
|
|
layer_height = 0.035
|
|
|
|
[sla_print:0.05 Normal]
|
|
inherits = *common*
|
|
layer_height = 0.05
|
|
|
|
[sla_print:0.1 Fast]
|
|
inherits = *common*
|
|
layer_height = 0.1
|
|
support_head_front_diameter = 0.5
|
|
support_head_penetration = 0.5
|
|
support_pillar_diameter = 1.3
|
|
|
|
########### Materials
|
|
|
|
[sla_material:*common 0.05*]
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
|
|
compatible_prints_condition = layer_height == 0.05
|
|
exposure_time = 12
|
|
initial_exposure_time = 45
|
|
initial_layer_height = 0.05
|
|
material_correction = 1,1,1
|
|
material_notes =
|
|
|
|
[sla_material:*common 0.025*]
|
|
inherits = *common 0.05*
|
|
compatible_prints_condition = layer_height == 0.025
|
|
exposure_time = 10
|
|
initial_exposure_time = 35
|
|
initial_layer_height = 0.025
|
|
|
|
[sla_material:*common 0.035*]
|
|
inherits = *common 0.05*
|
|
compatible_prints_condition = layer_height == 0.035
|
|
exposure_time = 13
|
|
initial_exposure_time = 40
|
|
initial_layer_height = 0.035
|
|
|
|
[sla_material:*common 0.1*]
|
|
inherits = *common 0.05*
|
|
compatible_prints_condition = layer_height == 0.1
|
|
exposure_time = 20
|
|
initial_exposure_time = 45
|
|
initial_layer_height = 0.1
|
|
|
|
########### Materials 0.025
|
|
|
|
[sla_material:3DM-ABS 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 12
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:3DM-Vulcan Gold 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 12
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:BlueCast Phrozen Wax 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 15
|
|
initial_exposure_time = 50
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast EcoGray 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast Kera Master Dental 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 45
|
|
material_type = Dental
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast X10 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 4
|
|
initial_exposure_time = 100
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:Esun Bio-Photopolymer Resin White 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 5
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Esun
|
|
|
|
[sla_material:Esun Standard Resin Black 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Esun
|
|
|
|
[sla_material:Photocentric Ash Grey 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 9
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Photocentric
|
|
|
|
[sla_material:Resinworks 3D Violet 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 15
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Resinworks 3D
|
|
|
|
[sla_material:Resinworks 3D Green 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 17
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Resinworks 3D
|
|
|
|
## Prusa
|
|
[sla_material:Prusa Orange Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Grey Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 7
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Azure Blue Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 7
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
|
|
[sla_material:Prusa Maroon Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Beige Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Pink Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 7
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa White Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6.5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Transparent Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 15
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Green Dental Casting 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 12
|
|
initial_exposure_time = 40
|
|
material_type = Casting
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Transparent Green Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Clear ABS like 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 6
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa ABS like White 0.025]
|
|
## inherits = *common 0.025*
|
|
## exposure_time = 6
|
|
## initial_exposure_time = 30
|
|
|
|
[sla_material:Prusa Grey High Tenacity 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 5
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Super Low Odor Cyan Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Super Low Odor Magenta Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Super Low Odor Yellow Tough 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Orange-Yellow Teeth Model 0.025]
|
|
inherits = *common 0.025*
|
|
exposure_time = 5
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
|
|
########### Materials 0.05
|
|
|
|
[sla_material:Asiga Denta Model 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 15
|
|
initial_exposure_time = 30
|
|
material_type = Dental
|
|
material_vendor = Asiga
|
|
|
|
[sla_material:Ameralabs AMD 3 LED 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 5
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Ameralabs
|
|
|
|
[sla_material:BlueCast EcoGray 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast Kera Master Dental 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 50
|
|
material_type = Dental
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast LCD-DLP Original 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 10
|
|
initial_exposure_time = 60
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast Phrozen Wax 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 16
|
|
initial_exposure_time = 50
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast S+ 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 9
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast X5 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 9
|
|
initial_exposure_time = 100
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast X10 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 100
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast 23LS 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8
|
|
initial_exposure_time = 50
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:Monocure 3D Black Rapid Resin 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = Monocure
|
|
|
|
[sla_material:Monocure 3D Blue Rapid Resin 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = Monocure
|
|
|
|
[sla_material:Monocure 3D Clear Rapid Resin 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = Monocure
|
|
|
|
[sla_material:Monocure 3D Grey Rapid Resin 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 10
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Monocure
|
|
|
|
[sla_material:Monocure 3D White Rapid Resin 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = Monocure
|
|
|
|
[sla_material:3DM-HTR140 (high temperature) 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 12
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Monocure
|
|
|
|
[sla_material:Esun Bio-Photopolymer Resin White 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Esun
|
|
|
|
[sla_material:Esun Standard Resin Black 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Esun
|
|
|
|
[sla_material:3DM-ABS 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 13
|
|
initial_exposure_time = 25
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:3DM-BLACK 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 20
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:3DM-DENT 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 45
|
|
material_type = Dental
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:3DM-HR Green 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 15
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:3DM-HR Red Wine 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 9
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:3DM-XPRO White 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 9
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:3DM-Vulcan Gold 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 15
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = 3DM
|
|
|
|
[sla_material:FTD Ash Grey 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 9
|
|
initial_exposure_time = 40
|
|
material_type = Tough
|
|
material_vendor = FTD
|
|
|
|
[sla_material:Harz Labs Model Resin Cherry 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Harz Labs
|
|
|
|
[sla_material:Resinworks 3D Violet 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 17
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Resinworks 3D
|
|
|
|
[sla_material:Resinworks 3D Green 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 21
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Resinworks 3D
|
|
|
|
[sla_material:Photocentric Hard Grey 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 15
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Photocentric
|
|
|
|
[sla_material:Photocentric Ash Grey 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 10
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Photocentric
|
|
|
|
## Prusa
|
|
|
|
[sla_material:Prusa Beige Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Orange Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7.5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Grey Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8.5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Black Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa Super Low Odor Beige Tough 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 7.5
|
|
## initial_exposure_time = 35
|
|
## material_type = Tough
|
|
## material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa Super Low Odor White Tough 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 6.5
|
|
## initial_exposure_time = 35
|
|
## material_type = Tough
|
|
## material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa Super Low Odor Grey Tough 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 6.5
|
|
## initial_exposure_time = 35
|
|
## material_type = Tough
|
|
## material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Super Low Odor Cyan Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Super Low Odor Magenta Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Super Low Odor Yellow Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa Black High Tenacity 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 7
|
|
## initial_exposure_time = 35
|
|
## material_type = Tough
|
|
## material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Orange-Yellow Teeth Model 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Green Dental Casting 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 13
|
|
initial_exposure_time = 50
|
|
material_type = Casting
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa Yellow Solid 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 7
|
|
## initial_exposure_time = 35
|
|
|
|
[sla_material:Prusa White Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7.5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Transparent Green Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Transparent Red Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Maroon Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7.5
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Pink Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Azure Blue Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Transparent Tough 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 15
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa Yellow Flexible 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 9
|
|
## initial_exposure_time = 35
|
|
|
|
[sla_material:Prusa Transparent Flexible 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 5
|
|
initial_exposure_time = 15
|
|
material_type = Flexible
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa White Flexible 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 9
|
|
## initial_exposure_time = 35
|
|
|
|
[sla_material:Prusa Blue Flexible 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 5
|
|
initial_exposure_time = 15
|
|
material_type = Flexible
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa Black Flexible 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 9
|
|
## initial_exposure_time = 35
|
|
|
|
## [sla_material:Prusa Red Flexible 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 9
|
|
## initial_exposure_time = 35
|
|
|
|
[sla_material:Prusa Clear ABS like 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 8
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
## [sla_material:Prusa ABS like White 0.05]
|
|
## inherits = *common 0.05*
|
|
## exposure_time = 8
|
|
## initial_exposure_time = 30
|
|
|
|
[sla_material:Prusa Yellow Jewelry Casting 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 13
|
|
initial_exposure_time = 45
|
|
material_type = Casting
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Grey High Tenacity 0.05]
|
|
inherits = *common 0.05*
|
|
exposure_time = 7
|
|
initial_exposure_time = 30
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
########### Materials 0.035
|
|
|
|
[sla_material:Prusa Orange Tough 0.035]
|
|
inherits = *common 0.035*
|
|
exposure_time = 6
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
########### Materials 0.1
|
|
|
|
[sla_material:BlueCast EcoGray 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 10
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
[sla_material:BlueCast Kera Master Dental 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 50
|
|
material_type = Tough
|
|
material_vendor = BlueCast
|
|
|
|
## Prusa
|
|
|
|
[sla_material:Prusa Orange Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Beige Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Pink Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Azure Blue Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Maroon Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa White Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 45
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Black Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 13
|
|
initial_exposure_time = 55
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Transparent Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 8
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Green Dental Casting 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 15
|
|
initial_exposure_time = 50
|
|
material_type = Casting
|
|
material_vendor = Prusa
|
|
|
|
[sla_material:Prusa Transparent Green Tough 0.1]
|
|
inherits = *common 0.1*
|
|
exposure_time = 7
|
|
initial_exposure_time = 35
|
|
material_type = Tough
|
|
material_vendor = Prusa
|
|
|
|
[printer:*common*]
|
|
printer_technology = FFF
|
|
bed_shape = 0x0,250x0,250x210,0x210
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
|
between_objects_gcode =
|
|
deretract_speed = 0
|
|
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
silent_mode = 0
|
|
remaining_times = 1
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
max_layer_height = 0.25
|
|
min_layer_height = 0.07
|
|
max_print_height = 200
|
|
nozzle_diameter = 0.4
|
|
octoprint_apikey =
|
|
octoprint_host =
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
|
|
printer_settings_id =
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 0.8
|
|
retract_length_toolchange = 4
|
|
retract_lift = 0.6
|
|
retract_lift_above = 0
|
|
retract_lift_below = 199
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 35
|
|
serial_port =
|
|
serial_speed = 250000
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|
|
printer_model = MK2S
|
|
printer_variant = 0.4
|
|
default_print_profile = 0.15mm OPTIMAL
|
|
default_filament_profile = Prusament PLA
|
|
|
|
[printer:*multimaterial*]
|
|
inherits = *common*
|
|
deretract_speed = 50
|
|
retract_before_travel = 3
|
|
retract_before_wipe = 60%
|
|
retract_layer_change = 0
|
|
retract_length = 4
|
|
retract_lift = 0.6
|
|
retract_lift_above = 0
|
|
retract_lift_below = 199
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 80
|
|
parking_pos_retraction = 92
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
single_extruder_multi_material = 1
|
|
variable_layer_height = 1
|
|
printer_model = MK2SMM
|
|
|
|
[printer:*mm-single*]
|
|
inherits = *multimaterial*
|
|
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0
|
|
default_print_profile = 0.15mm OPTIMAL
|
|
|
|
[printer:*mm-multi*]
|
|
inherits = *multimaterial*
|
|
high_current_on_filament_swap = 1
|
|
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors
|
|
extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0
|
|
default_print_profile = 0.15mm OPTIMAL
|
|
|
|
# XXXXXXXXXXXXXXXXX
|
|
# XXX--- MK2 ---XXX
|
|
# XXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK2S]
|
|
inherits = *common*
|
|
|
|
[printer:Original Prusa i3 MK2S 0.25 nozzle]
|
|
inherits = *common*
|
|
max_layer_height = 0.15
|
|
min_layer_height = 0.05
|
|
nozzle_diameter = 0.25
|
|
retract_length = 1
|
|
retract_speed = 50
|
|
variable_layer_height = 1
|
|
printer_variant = 0.25
|
|
retract_lift = 0.15
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
|
|
|
[printer:Original Prusa i3 MK2S 0.6 nozzle]
|
|
inherits = *common*
|
|
max_layer_height = 0.35
|
|
min_layer_height = 0.1
|
|
nozzle_diameter = 0.6
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
# XXX--- MK2MM ---XXX
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK2S MMU1 Single]
|
|
inherits = *mm-single*
|
|
max_layer_height = 0.25
|
|
min_layer_height = 0.07
|
|
|
|
[printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle]
|
|
inherits = *mm-single*
|
|
nozzle_diameter = 0.6
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
max_layer_height = 0.35
|
|
min_layer_height = 0.1
|
|
|
|
[printer:Original Prusa i3 MK2S MMU1]
|
|
inherits = *mm-multi*
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4
|
|
max_layer_height = 0.25
|
|
min_layer_height = 0.07
|
|
|
|
[printer:Original Prusa i3 MK2S MMU1 0.6 nozzle]
|
|
inherits = *mm-multi*
|
|
nozzle_diameter = 0.6,0.6,0.6,0.6
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
max_layer_height = 0.35
|
|
min_layer_height = 0.1
|
|
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
# XXX--- MK2.5 ---XXX
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK2.5]
|
|
inherits = Original Prusa i3 MK2S
|
|
printer_model = MK2.5
|
|
remaining_times = 1
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK2S 0.25 nozzle
|
|
printer_model = MK2.5
|
|
remaining_times = 1
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK2S 0.6 nozzle
|
|
printer_model = MK2.5
|
|
remaining_times = 1
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5 MMU2 Single]
|
|
inherits = Original Prusa i3 MK2.5; *mm2*
|
|
printer_model = MK2.5MMU2
|
|
single_extruder_multi_material = 0
|
|
max_print_height = 200
|
|
remaining_times = 1
|
|
silent_mode = 0
|
|
retract_lift_below = 199
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
default_print_profile = 0.15mm OPTIMAL MK2.5
|
|
default_filament_profile = Prusament PLA
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
|
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
|
|
|
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle
|
|
printer_model = MK2.5MMU2
|
|
|
|
[printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle
|
|
printer_model = MK2.5MMU2
|
|
|
|
[printer:Original Prusa i3 MK2.5 MMU2]
|
|
inherits = Original Prusa i3 MK2.5; *mm2*
|
|
printer_model = MK2.5MMU2
|
|
max_print_height = 200
|
|
remaining_times = 1
|
|
silent_mode = 0
|
|
retract_lift_below = 199
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
default_print_profile = 0.15mm OPTIMAL MK2.5
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
|
single_extruder_multi_material = 1
|
|
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
|
|
# (for example the retract values) are duplicaed from the first value, so they do not need
|
|
# to be defined explicitely.
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
|
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
|
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
|
|
|
[printer:Original Prusa i3 MK2.5S]
|
|
inherits = Original Prusa i3 MK2.5
|
|
printer_model = MK2.5S
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK2.5 0.25 nozzle
|
|
printer_model = MK2.5S
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK2.5 0.6 nozzle
|
|
printer_model = MK2.5S
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5S MMU2S Single]
|
|
inherits = Original Prusa i3 MK2.5; *mm2s*
|
|
printer_model = MK2.5SMMU2S
|
|
single_extruder_multi_material = 0
|
|
max_print_height = 200
|
|
remaining_times = 1
|
|
silent_mode = 0
|
|
retract_lift_below = 199
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
default_print_profile = 0.15mm OPTIMAL MK2.5
|
|
default_filament_profile = Prusament PLA
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
|
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
|
|
|
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK2.5S MMU2S Single
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
|
|
max_layer_height = 0.35
|
|
min_layer_height = 0.1
|
|
nozzle_diameter = 0.6
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
|
|
[printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK2.5S MMU2S Single
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
|
|
max_layer_height = 0.15
|
|
min_layer_height = 0.05
|
|
nozzle_diameter = 0.25
|
|
printer_variant = 0.25
|
|
retract_lift = 0.15
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
|
|
|
|
[printer:Original Prusa i3 MK2.5S MMU2S]
|
|
inherits = Original Prusa i3 MK2.5; *mm2s*
|
|
printer_model = MK2.5SMMU2S
|
|
max_print_height = 200
|
|
remaining_times = 1
|
|
silent_mode = 0
|
|
retract_lift_below = 199
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
default_print_profile = 0.15mm OPTIMAL MK2.5
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
|
single_extruder_multi_material = 1
|
|
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
|
|
# (for example the retract values) are duplicaed from the first value, so they do not need
|
|
# to be defined explicitely.
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
|
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
|
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
|
|
|
[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK2.5S MMU2S
|
|
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
|
|
[printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK2.5 MMU2
|
|
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
|
|
# XXXXXXXXXXXXXXXXX
|
|
# XXX--- MK3 ---XXX
|
|
# XXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK3]
|
|
inherits = *common*
|
|
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
|
machine_max_acceleration_e = 5000,5000
|
|
machine_max_acceleration_extruding = 1250,1250
|
|
machine_max_acceleration_retracting = 1250,1250
|
|
machine_max_acceleration_x = 1000,960
|
|
machine_max_acceleration_y = 1000,960
|
|
machine_max_acceleration_z = 1000,1000
|
|
machine_max_feedrate_e = 120,120
|
|
machine_max_feedrate_x = 200,100
|
|
machine_max_feedrate_y = 200,100
|
|
machine_max_feedrate_z = 12,12
|
|
machine_max_jerk_e = 1.5,1.5
|
|
machine_max_jerk_x = 8,8
|
|
machine_max_jerk_y = 8,8
|
|
machine_max_jerk_z = 0.4,0.4
|
|
machine_min_extruding_rate = 0,0
|
|
machine_min_travel_rate = 0,0
|
|
silent_mode = 1
|
|
remaining_times = 1
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
|
retract_lift_below = 209
|
|
max_print_height = 210
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
|
printer_model = MK3
|
|
default_print_profile = 0.15mm QUALITY MK3
|
|
|
|
[printer:Original Prusa i3 MK3 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK3
|
|
nozzle_diameter = 0.25
|
|
max_layer_height = 0.15
|
|
min_layer_height = 0.05
|
|
printer_variant = 0.25
|
|
retract_lift = 0.15
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK3
|
|
nozzle_diameter = 0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3S]
|
|
inherits = Original Prusa i3 MK3
|
|
printer_model = MK3S
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
|
|
|
[printer:Original Prusa i3 MK3S 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK3 0.25 nozzle
|
|
printer_model = MK3S
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
|
|
|
[printer:Original Prusa i3 MK3S 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK3 0.6 nozzle
|
|
printer_model = MK3S
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
|
|
|
|
[printer:*mm2*]
|
|
inherits = Original Prusa i3 MK3
|
|
single_extruder_multi_material = 1
|
|
cooling_tube_length = 10
|
|
cooling_tube_retraction = 30
|
|
parking_pos_retraction = 85
|
|
retract_length_toolchange = 3
|
|
extra_loading_move = -13
|
|
printer_model = MK3MMU2
|
|
default_print_profile = 0.15mm QUALITY MK3
|
|
default_filament_profile = Prusament PLA MMU2
|
|
|
|
[printer:*mm2s*]
|
|
inherits = Original Prusa i3 MK3
|
|
single_extruder_multi_material = 1
|
|
cooling_tube_length = 20
|
|
cooling_tube_retraction = 40
|
|
parking_pos_retraction = 85
|
|
retract_length_toolchange = 3
|
|
extra_loading_move = -25
|
|
printer_model = MK3SMMU2S
|
|
default_print_profile = 0.15mm QUALITY MK3
|
|
default_filament_profile = Prusament PLA MMU2
|
|
|
|
[printer:Original Prusa i3 MK3 MMU2 Single]
|
|
inherits = *mm2*
|
|
single_extruder_multi_material = 0
|
|
default_filament_profile = Prusament PLA
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
|
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
|
|
|
[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK3 MMU2 Single
|
|
single_extruder_multi_material = 0
|
|
nozzle_diameter = 0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK3 MMU2 Single
|
|
single_extruder_multi_material = 0
|
|
nozzle_diameter = 0.25
|
|
max_layer_height = 0.15
|
|
min_layer_height = 0.05
|
|
printer_variant = 0.25
|
|
retract_lift = 0.15
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3 MMU2]
|
|
inherits = *mm2*
|
|
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
|
|
# (for example the retract values) are duplicaed from the first value, so they do not need
|
|
# to be defined explicitely.
|
|
machine_max_acceleration_e = 8000,8000
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
|
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
|
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
|
|
|
[printer:Original Prusa i3 MK3S MMU2S Single]
|
|
inherits = *mm2s*
|
|
single_extruder_multi_material = 0
|
|
default_filament_profile = Prusament PLA
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
|
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
|
|
|
|
[printer:Original Prusa i3 MK3S MMU2S Single 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK3S MMU2S Single
|
|
single_extruder_multi_material = 0
|
|
nozzle_diameter = 0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3S MMU2S Single 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK3S MMU2S Single
|
|
single_extruder_multi_material = 0
|
|
nozzle_diameter = 0.25
|
|
max_layer_height = 0.15
|
|
min_layer_height = 0.05
|
|
printer_variant = 0.25
|
|
retract_lift = 0.15
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3S MMU2S]
|
|
inherits = *mm2s*
|
|
machine_max_acceleration_e = 8000,8000
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
|
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
|
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
|
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
|
|
|
## 0.6mm nozzle MMU2/S printer profiles
|
|
|
|
[printer:Original Prusa i3 MK3S MMU2S 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK3S MMU2S
|
|
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3 MMU2 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK3 MMU2
|
|
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
|
|
|
## MINI
|
|
|
|
[printer:Original Prusa MINI]
|
|
inherits = *common*
|
|
printer_model = MINI
|
|
printer_technology = FFF
|
|
printer_variant = 0.4
|
|
printer_vendor =
|
|
thumbnails = 16x16,220x124
|
|
bed_shape = 0x0,180x0,180x180,0x180
|
|
default_filament_profile = "Prusament PLA"
|
|
default_print_profile = 0.15mm QUALITY MINI
|
|
gcode_flavor = marlin
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 1250
|
|
machine_max_acceleration_retracting = 1250
|
|
machine_max_acceleration_x = 1250
|
|
machine_max_acceleration_y = 1250
|
|
machine_max_acceleration_z = 400
|
|
machine_max_feedrate_e = 80
|
|
machine_max_feedrate_x = 180
|
|
machine_max_feedrate_y = 180
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 10
|
|
machine_max_jerk_x = 8
|
|
machine_max_jerk_y = 8
|
|
machine_max_jerk_z = 2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
max_layer_height = 0.25
|
|
max_print_height = 180
|
|
min_layer_height = 0.07
|
|
nozzle_diameter = 0.4
|
|
retract_length = 3.2
|
|
retract_lift = 0.2
|
|
retract_speed = 70
|
|
deretract_speed = 40
|
|
wipe = 1
|
|
retract_before_wipe = 70%
|
|
retract_before_travel = 1.5
|
|
retract_lift_above = 0
|
|
retract_lift_below = 179
|
|
retract_layer_change = 0
|
|
silent_mode = 0
|
|
remaining_times = 1
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM92 E317 ; set steps/unit for extruder\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
|
|
end_gcode = G1 E-1 F2100 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+5, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y180 F4200 ; park print head\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM84 ; disable motors
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
|
|
extruder_colour =
|
|
|
|
[printer:Original Prusa MINI 0.25 nozzle]
|
|
inherits = Original Prusa MINI
|
|
printer_variant = 0.25
|
|
nozzle_diameter = 0.25
|
|
max_layer_height = 0.15
|
|
min_layer_height = 0.05
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle MINI
|
|
retract_length = 3
|
|
retract_lift = 0.15
|
|
retract_speed = 70
|
|
deretract_speed = 40
|
|
wipe = 1
|
|
retract_before_wipe = 70%
|
|
retract_before_travel = 1
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM92 E317 ; set steps/unit for extruder\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow
|
|
|
|
[printer:Original Prusa MINI 0.6 nozzle]
|
|
inherits = Original Prusa MINI
|
|
printer_variant = 0.6
|
|
nozzle_diameter = 0.6
|
|
max_layer_height = 0.40
|
|
min_layer_height = 0.15
|
|
default_print_profile = 0.30mm QUALITY 0.6 nozzle MINI
|
|
retract_length = 3.5
|
|
retract_lift = 0.2
|
|
retract_speed = 70
|
|
deretract_speed = 40
|
|
wipe = 1
|
|
retract_before_wipe = 70%
|
|
retract_before_travel = 1
|
|
|
|
[printer:Original Prusa SL1]
|
|
printer_technology = SLA
|
|
printer_model = SL1
|
|
printer_variant = default
|
|
default_sla_material_profile = Prusa Orange Tough 0.05
|
|
default_sla_print_profile = 0.05 Normal
|
|
thumbnails = 400x400,800x480
|
|
bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02
|
|
display_height = 68.04
|
|
display_orientation = portrait
|
|
display_pixels_x = 2560
|
|
display_pixels_y = 1440
|
|
display_width = 120.96
|
|
max_print_height = 150
|
|
min_exposure_time = 1
|
|
max_exposure_time = 120
|
|
min_initial_exposure_time = 1
|
|
max_initial_exposure_time = 300
|
|
printer_correction = 1,1,1
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
|
|
|
|
# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
|
|
[obsolete_presets]
|
|
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
|
|
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|