136 lines
5.0 KiB
Perl
136 lines
5.0 KiB
Perl
use Test::More tests => 15;
|
|
use strict;
|
|
use warnings;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/../lib";
|
|
use local::lib "$FindBin::Bin/../local-lib";
|
|
}
|
|
|
|
use List::Util qw(first);
|
|
use Slic3r;
|
|
use Slic3r::Test;
|
|
|
|
{
|
|
my $config = Slic3r::Config::new_from_defaults;
|
|
|
|
my $test = sub {
|
|
my ($conf) = @_;
|
|
$conf ||= $config;
|
|
|
|
my $print = Slic3r::Test::init_print('2x20x10', config => $conf);
|
|
|
|
my $last_move_was_z_change = 0;
|
|
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
|
|
if ($last_move_was_z_change && $cmd ne $config->layer_gcode) {
|
|
fail 'custom layer G-code was not applied after Z change';
|
|
}
|
|
if (!$last_move_was_z_change && $cmd eq $config->layer_gcode) {
|
|
fail 'custom layer G-code was not applied after Z change';
|
|
}
|
|
|
|
$last_move_was_z_change = (defined $info->{dist_Z} && $info->{dist_Z} > 0);
|
|
});
|
|
|
|
1;
|
|
};
|
|
|
|
$config->set('start_gcode', '_MY_CUSTOM_START_GCODE_'); # to avoid dealing with the nozzle lift in start G-code
|
|
$config->set('layer_gcode', '_MY_CUSTOM_LAYER_GCODE_');
|
|
ok $test->(), "custom layer G-code is applied after Z move and before other moves";
|
|
}
|
|
|
|
#==========================================================
|
|
|
|
{
|
|
my $parser = Slic3r::GCode::PlaceholderParser->new;
|
|
$parser->apply_config(my $config = Slic3r::Config::new_from_defaults);
|
|
$parser->set('foo' => '0');
|
|
is $parser->process('[temperature_[foo]]'),
|
|
$config->temperature->[0],
|
|
"nested config options";
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config::new_from_defaults;
|
|
$config->set('output_filename_format', 'ts_[travel_speed]_lh_[layer_height].gcode');
|
|
$config->set('start_gcode', "TRAVEL:[travel_speed] HEIGHT:[layer_height]\n");
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
|
|
my $output_file = $print->print->output_filepath;
|
|
my ($t, $h) = map $config->$_, qw(travel_speed layer_height);
|
|
ok $output_file =~ /ts_${t}_/, 'print config options are replaced in output filename';
|
|
ok $output_file =~ /lh_$h\./, 'region config options are replaced in output filename';
|
|
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /TRAVEL:$t/, 'print config options are replaced in custom G-code';
|
|
ok $gcode =~ /HEIGHT:$h/, 'region config options are replaced in custom G-code';
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config->new;
|
|
$config->set('extruder', 2);
|
|
$config->set('first_layer_temperature', [200,205]);
|
|
|
|
{
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /M104 S205 T1/, 'temperature set correctly for non-zero yet single extruder';
|
|
ok $gcode !~ /M104 S\d+ T0/, 'unused extruder correctly ignored';
|
|
}
|
|
|
|
$config->set('infill_extruder', 1);
|
|
{
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
ok $gcode =~ /M104 S200 T0/, 'temperature set correctly for first extruder';
|
|
ok $gcode =~ /M104 S205 T1/, 'temperature set correctly for second extruder';
|
|
}
|
|
|
|
$config->set('start_gcode', qq!
|
|
;__temp0:[first_layer_temperature_0]__
|
|
;__temp1:[first_layer_temperature_1]__
|
|
;__temp2:[first_layer_temperature_2]__
|
|
!);
|
|
{
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
# we use the [infill_extruder] placeholder to make sure this test doesn't
|
|
# catch a false positive caused by the unparsed start G-code option itself
|
|
# being embedded in the G-code
|
|
ok $gcode =~ /temp0:200/, 'temperature placeholder for first extruder correctly populated';
|
|
ok $gcode =~ /temp1:205/, 'temperature placeholder for second extruder correctly populated';
|
|
ok $gcode =~ /temp2:200/, 'temperature placeholder for unused extruder populated with first value';
|
|
}
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config::new_from_defaults;
|
|
$config->set('before_layer_gcode', ';BEFORE [layer_num]');
|
|
$config->set('layer_gcode', ';CHANGE [layer_num]');
|
|
$config->set('support_material', 1);
|
|
$config->set('layer_height', 0.2);
|
|
my $print = Slic3r::Test::init_print('overhang', config => $config);
|
|
my $gcode = Slic3r::Test::gcode($print);
|
|
|
|
my @before = ();
|
|
my @change = ();
|
|
foreach my $line (split /\R+/, $gcode) {
|
|
if ($line =~ /;BEFORE (\d+)/) {
|
|
push @before, $1;
|
|
} elsif ($line =~ /;CHANGE (\d+)/) {
|
|
push @change, $1;
|
|
fail 'inconsistent layer_num before and after layer change'
|
|
if $1 != $before[-1];
|
|
}
|
|
}
|
|
is_deeply \@before, \@change, 'layer_num is consistent before and after layer changes';
|
|
ok !defined(first { $change[$_] != $change[$_-1]+1 } 1..$#change),
|
|
'layer_num grows continously'; # i.e. no duplicates or regressions
|
|
}
|
|
|
|
__END__
|