97 lines
3.5 KiB
Perl
97 lines
3.5 KiB
Perl
use Test::More tests => 4;
|
|
use strict;
|
|
use warnings;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/../lib";
|
|
}
|
|
|
|
use List::Util qw(first);
|
|
use Slic3r;
|
|
use Slic3r::Test;
|
|
|
|
{
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('skirts', 0);
|
|
$config->set('perimeters', 0);
|
|
|
|
my $test = sub {
|
|
my ($conf) = @_;
|
|
$conf ||= $config;
|
|
|
|
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
|
|
|
|
my %layers_with_shells = (); # Z => $count
|
|
Slic3r::GCode::Reader->new(gcode => Slic3r::Test::gcode($print))->parse(sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
|
|
if ($self->Z > 0) {
|
|
$layers_with_shells{$self->Z} //= 0;
|
|
$layers_with_shells{$self->Z} = 1 if $info->{extruding} && $info->{dist_XY} > 0;
|
|
}
|
|
});
|
|
my @shells = @layers_with_shells{sort { $a <=> $b } keys %layers_with_shells};
|
|
fail "wrong number of bottom solid layers"
|
|
unless !defined(first { !$_ } @shells[0..$config->bottom_solid_layers-1]);
|
|
fail "wrong number of top solid layers"
|
|
unless !defined(first { !$_ } @shells[-$config->top_solid_layers..-1]);
|
|
1;
|
|
};
|
|
|
|
ok $test->(), "proper number of shells is applied";
|
|
$config->set('fill_density', 0);
|
|
|
|
ok $test->(), "proper number of shells is applied even when fill density is none";
|
|
}
|
|
|
|
# issue #1161
|
|
{
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('layer_height', 0.3);
|
|
$config->set('first_layer_height', '100%');
|
|
$config->set('bottom_solid_layers', 0);
|
|
$config->set('top_solid_layers', 3);
|
|
$config->set('cooling', 0);
|
|
$config->set('solid_infill_speed', 99);
|
|
$config->set('top_solid_infill_speed', 99);
|
|
|
|
my $print = Slic3r::Test::init_print('V', config => $config);
|
|
my %layers_with_solid_infill = (); # Z => 1
|
|
Slic3r::GCode::Reader->new(gcode => Slic3r::Test::gcode($print))->parse(sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
|
|
$layers_with_solid_infill{$self->Z} = 1
|
|
if $info->{extruding} && ($args->{F} // $self->F) == $config->solid_infill_speed*60;
|
|
});
|
|
is scalar(map $layers_with_solid_infill{$_}, grep $_ <= 7.2, keys %layers_with_solid_infill), 3,
|
|
"correct number of top solid shells is generated in V-shaped object";
|
|
}
|
|
|
|
{
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
# we need to check against one perimeter because this test is calibrated
|
|
# (shape, extrusion_width) so that perimeters cover the bottom surfaces of
|
|
# their lower layer - the test checks that shells are not generated on the
|
|
# above layers (thus 'across' the shadow perimeter)
|
|
$config->set('perimeters', 1);
|
|
$config->set('fill_density', 0);
|
|
$config->set('cooling', 0); # prevent speed alteration
|
|
$config->set('first_layer_speed', '100%'); # prevent speed alteration
|
|
$config->set('extrusion_width', 0.6);
|
|
$config->set('bottom_solid_layers', 3);
|
|
$config->set('top_solid_layers', 0);
|
|
|
|
my $print = Slic3r::Test::init_print('V', config => $config);
|
|
my %layers = (); # Z => 1
|
|
Slic3r::GCode::Reader->new(gcode => Slic3r::Test::gcode($print))->parse(sub {
|
|
my ($self, $cmd, $args, $info) = @_;
|
|
$layers{$self->Z} = 1
|
|
if $info->{extruding} && ($args->{F} // $self->F) == $config->solid_infill_speed*60;
|
|
});
|
|
is scalar(keys %layers), $config->bottom_solid_layers,
|
|
"shells are not extended into void if fill density is 0";
|
|
}
|
|
|
|
__END__
|