184 lines
6.8 KiB
Perl
Executable File
184 lines
6.8 KiB
Perl
Executable File
#!/usr/bin/perl
|
|
|
|
use strict;
|
|
use warnings;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/lib";
|
|
}
|
|
|
|
use Getopt::Long;
|
|
use Slic3r;
|
|
use XXX;
|
|
|
|
my %opt;
|
|
GetOptions(
|
|
'help' => sub { usage() },
|
|
|
|
'debug' => \$Slic3r::debug,
|
|
'o|output' => \$opt{output},
|
|
|
|
'save=s' => \$opt{save},
|
|
'load=s' => \$opt{load},
|
|
|
|
# printer options
|
|
'nozzle-diameter=f' => \$Slic3r::nozzle_diameter,
|
|
'print-center=s' => \$Slic3r::print_center,
|
|
'use-relative-e-distances' => \$Slic3r::use_relative_e_distances,
|
|
'z-offset=f' => \$Slic3r::z_offset,
|
|
|
|
# filament options
|
|
'filament-diameter=f' => \$Slic3r::filament_diameter,
|
|
'filament-packing-density=f' => \$Slic3r::filament_packing_density,
|
|
'temperature=i' => \$Slic3r::temperature,
|
|
|
|
# speed options
|
|
'print-feed-rate=i' => \$Slic3r::print_feed_rate,
|
|
'travel-feed-rate=i' => \$Slic3r::travel_feed_rate,
|
|
'perimeter-feed-rate=i' => \$Slic3r::perimeter_feed_rate,
|
|
'bottom-layer-speed-ratio=f' => \$Slic3r::bottom_layer_speed_ratio,
|
|
|
|
# accuracy options
|
|
'layer-height=f' => \$Slic3r::layer_height,
|
|
'high-res-perimeters' => \$Slic3r::high_res_perimeters,
|
|
|
|
# print options
|
|
'perimeters=i' => \$Slic3r::perimeter_offsets,
|
|
'solid-layers=i' => \$Slic3r::solid_layers,
|
|
'fill-type=s' => \$Slic3r::fill_type,
|
|
'fill-density=f' => \$Slic3r::fill_density,
|
|
'fill-angle=i' => \$Slic3r::fill_angle,
|
|
|
|
# retraction options
|
|
'retract-length=f' => \$Slic3r::retract_length,
|
|
'retract-speed=i' => \$Slic3r::retract_speed,
|
|
'retract-restart-extra=f' => \$Slic3r::retract_restart_extra,
|
|
'retract-before-travel=f' => \$Slic3r::retract_before_travel,
|
|
|
|
# skirt options
|
|
'skirts=i' => \$Slic3r::skirts,
|
|
'skirt-distance=i' => \$Slic3r::skirt_distance,
|
|
|
|
# transform options
|
|
'scale=f' => \$Slic3r::scale,
|
|
'rotate=i' => \$Slic3r::rotate,
|
|
'multiply-x=i' => \$Slic3r::multiply_x,
|
|
'multiply-y=i' => \$Slic3r::multiply_y,
|
|
'multiply-distance=i' => \$Slic3r::multiply_distance,
|
|
);
|
|
|
|
# load configuration
|
|
if ($opt{load}) {
|
|
-e $opt{load} or die "Cannot find specified configuration file.\n";
|
|
Slic3r::Config->load($opt{load});
|
|
}
|
|
|
|
# validate configuration
|
|
Slic3r::Config->validate;
|
|
|
|
# save configuration
|
|
Slic3r::Config->save($opt{save}) if $opt{save};
|
|
|
|
# start GUI
|
|
if (!@ARGV && !$opt{save} && eval "require Slic3r::GUI; 1") {
|
|
Slic3r::GUI->new->MainLoop;
|
|
exit;
|
|
}
|
|
|
|
if ($ARGV[0]) {
|
|
|
|
# skein
|
|
my $input_file = $ARGV[0];
|
|
|
|
my $skein = Slic3r::Skein->new(
|
|
input_file => $input_file,
|
|
output_file => $opt{output},
|
|
);
|
|
$skein->go;
|
|
|
|
} else {
|
|
usage(1) unless $opt{save};
|
|
}
|
|
|
|
sub usage {
|
|
my ($exit_code) = @_;
|
|
|
|
print <<"EOF";
|
|
Slic3r is a STL-to-GCODE translator for RepRap 3D printers
|
|
written by Alessandro Ranellucci <aar\@cpan.org> - http://slic3r.org/
|
|
|
|
Usage: slic3r.pl [ OPTIONS ] file.stl
|
|
|
|
--help Output this usage screen and exit
|
|
--save <file> Save configuration to the specified file
|
|
--load <file> Load configuration from the specified file
|
|
|
|
Printer options:
|
|
--nozzle-diameter Diameter of nozzle in mm (default: $Slic3r::nozzle_diameter)
|
|
--print-center Coordinates of the point to center the print around
|
|
(default: $Slic3r::print_center->[0],$Slic3r::print_center->[1])
|
|
--use-relative-e-distances
|
|
Use relative distances for extrusion in GCODE output
|
|
--z-offset Additional height in mm to add to vertical coordinates
|
|
(+/-, default: $Slic3r::z_offset)
|
|
|
|
Filament options:
|
|
--filament-diameter Diameter of your raw filament (default: $Slic3r::filament_diameter)
|
|
--filament-packing-density
|
|
Ratio of the extruded volume over volume pushed
|
|
into the extruder (default: $Slic3r::filament_packing_density)
|
|
--temperature Extrusion temperature (default: $Slic3r::temperature)
|
|
|
|
Speed options:
|
|
--print-feed-rate Speed of print moves in mm/sec (default: $Slic3r::print_feed_rate)
|
|
--travel-feed-rate Speed of non-print moves in mm/sec (default: $Slic3r::travel_feed_rate)
|
|
--perimeter-feed-rate
|
|
Speed of print moves for perimeters in mm/sec (default: $Slic3r::print_feed_rate)
|
|
--bottom-layer-speed-ratio
|
|
Factor to increase/decrease speeds on bottom
|
|
layer by (default: $Slic3r::bottom_layer_speed_ratio)
|
|
|
|
Accuracy options:
|
|
--layer-height Layer height in mm (default: $Slic3r::layer_height)
|
|
--high-res-perimeters
|
|
Print perimeters at half layer height to get surface accuracy
|
|
(default: disabled)
|
|
|
|
Print options:
|
|
--perimeters Number of perimeters/horizontal skins (range: 1+,
|
|
default: $Slic3r::perimeter_offsets)
|
|
--solid-layers Number of solid layers to do for top/bottom surfaces
|
|
(range: 1+, default: $Slic3r::solid_layers)
|
|
--fill-density Infill density (range: 0-1, default: $Slic3r::fill_density)
|
|
--fill-angle Infill angle in degrees (range: 0-90, default: $Slic3r::fill_angle)
|
|
|
|
Retraction options:
|
|
--retract-length Length of retraction in mm when pausing extrusion
|
|
(default: $Slic3r::retract_length)
|
|
--retract-speed Speed for retraction in mm/sec (default: $Slic3r::retract_speed)
|
|
--retract-restart-extra
|
|
Additional amount of filament in mm to push after
|
|
compensating retraction (default: $Slic3r::retract_restart_extra)
|
|
--retract-before-travel
|
|
Only retract before travel moves of this length (default: $Slic3r::retract_before_travel)
|
|
|
|
Skirt options:
|
|
--skirts Number of skirts to draw (default: $Slic3r::skirts)
|
|
--skirt-distance Distance in mm between innermost skirt and object
|
|
(default: $Slic3r::skirt_distance)
|
|
-o, --output File to output gcode to (default: <inputfile>.gcode)
|
|
|
|
Transform options:
|
|
--scale Factor for scaling input object (default: $Slic3r::scale)
|
|
--rotate Rotation angle in degrees (0-360, default: $Slic3r::rotate)
|
|
--multiply-x Number of items along X axis (1+, default: $Slic3r::multiply_x)
|
|
--multiply-y Number of items along Y axis (1+, default: $Slic3r::multiply_y)
|
|
--multiply-distance Distance in mm between copies (default: $Slic3r::multiply_distance)
|
|
|
|
EOF
|
|
exit ($exit_code || 0);
|
|
}
|
|
|
|
__END__
|