PrusaSlicer-NonPlainar/src/libslic3r/libslic3r.h

281 lines
8.9 KiB
C++

#ifndef _libslic3r_h_
#define _libslic3r_h_
#include "libslic3r_version.h"
// this needs to be included early for MSVC (listing it in Build.PL is not enough)
#include <memory>
#include <array>
#include <algorithm>
#include <ostream>
#include <iostream>
#include <math.h>
#include <queue>
#include <sstream>
#include <cstdio>
#include <stdint.h>
#include <stdarg.h>
#include <vector>
#include <cassert>
#include <cmath>
#include <type_traits>
#include "Technologies.hpp"
#include "Semver.hpp"
#if 1
// Saves around 32% RAM after slicing step, 6.7% after G-code export (tested on PrusaSlicer 2.2.0 final).
using coord_t = int32_t;
#else
//FIXME At least FillRectilinear2 and std::boost Voronoi require coord_t to be 32bit.
typedef int64_t coord_t;
#endif
using coordf_t = double;
//FIXME This epsilon value is used for many non-related purposes:
// For a threshold of a squared Euclidean distance,
// for a trheshold in a difference of radians,
// for a threshold of a cross product of two non-normalized vectors etc.
static constexpr double EPSILON = 1e-4;
// Scaling factor for a conversion from coord_t to coordf_t: 10e-6
// This scaling generates a following fixed point representation with for a 32bit integer:
// 0..4294mm with 1nm resolution
// int32_t fits an interval of (-2147.48mm, +2147.48mm)
// with int64_t we don't have to worry anymore about the size of the int.
static constexpr double SCALING_FACTOR = 0.000001;
// RESOLUTION, SCALED_RESOLUTION: Used as an error threshold for a Douglas-Peucker polyline simplification algorithm.
static constexpr double RESOLUTION = 0.0125;
#define SCALED_RESOLUTION (RESOLUTION / SCALING_FACTOR)
static constexpr double PI = 3.141592653589793238;
// When extruding a closed loop, the loop is interrupted and shortened a bit to reduce the seam.
static constexpr double LOOP_CLIPPING_LENGTH_OVER_NOZZLE_DIAMETER = 0.15;
// Maximum perimeter length for the loop to apply the small perimeter speed.
#define SMALL_PERIMETER_LENGTH ((6.5 / SCALING_FACTOR) * 2 * PI)
static constexpr double INSET_OVERLAP_TOLERANCE = 0.4;
// 3mm ring around the top / bottom / bridging areas.
//FIXME This is quite a lot.
static constexpr double EXTERNAL_INFILL_MARGIN = 3.;
//FIXME Better to use an inline function with an explicit return type.
//inline coord_t scale_(coordf_t v) { return coord_t(floor(v / SCALING_FACTOR + 0.5f)); }
#define scale_(val) ((val) / SCALING_FACTOR)
#define SCALED_EPSILON scale_(EPSILON)
#define SLIC3R_DEBUG_OUT_PATH_PREFIX "out/"
inline std::string debug_out_path(const char *name, ...)
{
char buffer[2048];
va_list args;
va_start(args, name);
std::vsprintf(buffer, name, args);
va_end(args);
return std::string(SLIC3R_DEBUG_OUT_PATH_PREFIX) + std::string(buffer);
}
#ifndef UNUSED
#define UNUSED(x) (void)(x)
#endif /* UNUSED */
// Write slices as SVG images into out directory during the 2D processing of the slices.
// #define SLIC3R_DEBUG_SLICE_PROCESSING
namespace Slic3r {
extern Semver SEMVER;
template<typename T, typename Q>
inline T unscale(Q v) { return T(v) * T(SCALING_FACTOR); }
enum Axis {
X=0,
Y,
Z,
E,
F,
NUM_AXES,
// For the GCodeReader to mark a parsed axis, which is not in "XYZEF", it was parsed correctly.
UNKNOWN_AXIS = NUM_AXES,
NUM_AXES_WITH_UNKNOWN,
};
template <class T>
inline void append_to(std::vector<T> &dst, const std::vector<T> &src)
{
dst.insert(dst.end(), src.begin(), src.end());
}
template <typename T>
inline void append(std::vector<T>& dest, const std::vector<T>& src)
{
if (dest.empty())
dest = src;
else
dest.insert(dest.end(), src.begin(), src.end());
}
template <typename T>
inline void append(std::vector<T>& dest, std::vector<T>&& src)
{
if (dest.empty())
dest = std::move(src);
else
std::move(std::begin(src), std::end(src), std::back_inserter(dest));
src.clear();
src.shrink_to_fit();
}
// Casting an std::vector<> from one type to another type without warnings about a loss of accuracy.
template<typename T_TO, typename T_FROM>
std::vector<T_TO> cast(const std::vector<T_FROM> &src)
{
std::vector<T_TO> dst;
dst.reserve(src.size());
for (const T_FROM &a : src)
dst.emplace_back((T_TO)a);
return dst;
}
template <typename T>
inline void remove_nulls(std::vector<T*> &vec)
{
vec.erase(
std::remove_if(vec.begin(), vec.end(), [](const T *ptr) { return ptr == nullptr; }),
vec.end());
}
template <typename T>
inline void sort_remove_duplicates(std::vector<T> &vec)
{
std::sort(vec.begin(), vec.end());
vec.erase(std::unique(vec.begin(), vec.end()), vec.end());
}
// Older compilers do not provide a std::make_unique template. Provide a simple one.
template<typename T, typename... Args>
inline std::unique_ptr<T> make_unique(Args&&... args) {
return std::unique_ptr<T>(new T(std::forward<Args>(args)...));
}
// Variant of std::lower_bound() with compare predicate, but without the key.
// This variant is very useful in case that the T type is large or it does not even have a public constructor.
template<class ForwardIt, class LowerThanKeyPredicate>
ForwardIt lower_bound_by_predicate(ForwardIt first, ForwardIt last, LowerThanKeyPredicate lower_thank_key)
{
ForwardIt it;
typename std::iterator_traits<ForwardIt>::difference_type count, step;
count = std::distance(first, last);
while (count > 0) {
it = first;
step = count / 2;
std::advance(it, step);
if (lower_thank_key(*it)) {
first = ++it;
count -= step + 1;
}
else
count = step;
}
return first;
}
// from https://en.cppreference.com/w/cpp/algorithm/lower_bound
template<class ForwardIt, class T, class Compare=std::less<>>
ForwardIt binary_find(ForwardIt first, ForwardIt last, const T& value, Compare comp={})
{
// Note: BOTH type T and the type after ForwardIt is dereferenced
// must be implicitly convertible to BOTH Type1 and Type2, used in Compare.
// This is stricter than lower_bound requirement (see above)
first = std::lower_bound(first, last, value, comp);
return first != last && !comp(value, *first) ? first : last;
}
// from https://en.cppreference.com/w/cpp/algorithm/lower_bound
template<class ForwardIt, class LowerThanKeyPredicate, class EqualToKeyPredicate>
ForwardIt binary_find_by_predicate(ForwardIt first, ForwardIt last, LowerThanKeyPredicate lower_thank_key, EqualToKeyPredicate equal_to_key)
{
// Note: BOTH type T and the type after ForwardIt is dereferenced
// must be implicitly convertible to BOTH Type1 and Type2, used in Compare.
// This is stricter than lower_bound requirement (see above)
first = lower_bound_by_predicate(first, last, lower_thank_key);
return first != last && equal_to_key(*first) ? first : last;
}
template<typename T>
static inline T sqr(T x)
{
return x * x;
}
template <typename T>
static inline T clamp(const T low, const T high, const T value)
{
return std::max(low, std::min(high, value));
}
template <typename T, typename Number>
static inline T lerp(const T& a, const T& b, Number t)
{
assert((t >= Number(-EPSILON)) && (t <= Number(1) + Number(EPSILON)));
return (Number(1) - t) * a + t * b;
}
template <typename Number>
static inline bool is_approx(Number value, Number test_value)
{
return std::fabs(double(value) - double(test_value)) < double(EPSILON);
}
// A meta-predicate which is true for integers wider than or equal to coord_t
template<class I> struct is_scaled_coord
{
static const constexpr bool value =
std::is_integral<I>::value &&
std::numeric_limits<I>::digits >=
std::numeric_limits<coord_t>::digits;
};
// Meta predicates for floating, 'scaled coord' and generic arithmetic types
// Can be used to restrict templates to work for only the specified set of types.
// parameter T is the type we want to restrict
// parameter O (Optional defaults to T) is the type that the whole expression
// will be evaluated to.
// e.g. template<class T> FloatingOnly<T, bool> is_nan(T val);
// The whole template will be defined only for floating point types and the
// return type will be bool.
// For more info how to use, see docs for std::enable_if
//
template<class T, class O = T>
using FloatingOnly = std::enable_if_t<std::is_floating_point<T>::value, O>;
template<class T, class O = T>
using ScaledCoordOnly = std::enable_if_t<is_scaled_coord<T>::value, O>;
template<class T, class O = T>
using IntegerOnly = std::enable_if_t<std::is_integral<T>::value, O>;
template<class T, class O = T>
using ArithmeticOnly = std::enable_if_t<std::is_arithmetic<T>::value, O>;
template<class T, class O = T>
using IteratorOnly = std::enable_if_t<
!std::is_same_v<typename std::iterator_traits<T>::value_type, void>, O
>;
template<class T, class I, class... Args> // Arbitrary allocator can be used
IntegerOnly<I, std::vector<T, Args...>> reserve_vector(I capacity)
{
std::vector<T, Args...> ret;
if (capacity > I(0)) ret.reserve(size_t(capacity));
return ret;
}
} // namespace Slic3r
#endif