3017 lines
112 KiB
Plaintext
3017 lines
112 KiB
Plaintext
# Copyright (C) 2018 THE Slic3rPE'S COPYRIGHT HOLDER
|
|
# This file is distributed under the same license as the Slic3rPE package.
|
|
# Oleksandra Iushchenko <yusanka@gmail.com>, 2018.
|
|
#
|
|
msgid ""
|
|
msgstr ""
|
|
"Project-Id-Version: SLIC3R PE VERSION\n"
|
|
"Report-Msgid-Bugs-To: \n"
|
|
"POT-Creation-Date: 2018-02-13 17:18+0100\n"
|
|
"PO-Revision-Date: 2018-02-15 18:17+0100\n"
|
|
"Last-Translator: Oleksandra Iushchenko <yusanka@gmail.com>\n"
|
|
"Language-Team: \n"
|
|
"MIME-Version: 1.0\n"
|
|
"Content-Type: text/plain; charset=UTF-8\n"
|
|
"Content-Transfer-Encoding: 8bit\n"
|
|
"X-Generator: Poedit 2.0.6\n"
|
|
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
|
|
"Language: en_US\n"
|
|
"X-Poedit-KeywordsList: _L\n"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:50
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1188
|
|
msgid "Size"
|
|
msgstr "Size"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:51
|
|
msgid "Size in X and Y of the rectangular plate."
|
|
msgstr "Size in X and Y of the rectangular plate."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:57
|
|
msgid "Origin"
|
|
msgstr "Origin"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:58
|
|
msgid ""
|
|
"Distance of the 0,0 G-code coordinate from the front left corner of the "
|
|
"rectangle."
|
|
msgstr ""
|
|
"Distance of the 0,0 G-code coordinate from the front left corner of the "
|
|
"rectangle."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:65
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:133
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:204
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:215
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:329
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:340
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:359
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:438
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:783
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:803
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:862
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:880
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:898
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1046
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1054
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1096
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1105
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1115
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1123
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1131
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1217
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1423
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1493
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1529
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1706
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1713
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1720
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1729
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1739
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1749
|
|
msgid "mm"
|
|
msgstr "mm"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:66
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:435
|
|
msgid "Diameter"
|
|
msgstr "Diameter"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:67
|
|
msgid ""
|
|
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
|
|
"center."
|
|
msgstr ""
|
|
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
|
|
"center."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:965
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:312
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:704
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:960
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1274
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1447
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1473
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:432
|
|
msgid "Extruders"
|
|
msgstr "Extruders"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:966
|
|
msgid "Number of extruders of the printer."
|
|
msgstr "Number of extruders of the printer."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:30
|
|
msgid "Avoid crossing perimeters"
|
|
msgstr "Avoid crossing perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:31
|
|
msgid ""
|
|
"Optimize travel moves in order to minimize the crossing of perimeters. This "
|
|
"is mostly useful with Bowden extruders which suffer from oozing. This "
|
|
"feature slows down both the print and the G-code generation."
|
|
msgstr ""
|
|
"Optimize travel moves in order to minimize the crossing of perimeters. This "
|
|
"is mostly useful with Bowden extruders which suffer from oozing. This "
|
|
"feature slows down both the print and the G-code generation."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:38
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:939
|
|
msgid "Bed shape"
|
|
msgstr "Bed shape"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:42
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1574
|
|
msgid "Other layers"
|
|
msgstr "Other layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:43
|
|
msgid ""
|
|
"Bed temperature for layers after the first one. Set this to zero to disable "
|
|
"bed temperature control commands in the output."
|
|
msgstr ""
|
|
"Bed temperature for layers after the first one. Set this to zero to disable "
|
|
"bed temperature control commands in the output."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:46
|
|
msgid "Bed temperature"
|
|
msgstr "Bed temperature"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:52
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1131
|
|
msgid "Before layer change G-code"
|
|
msgstr "Before layer change G-code"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:53
|
|
msgid ""
|
|
"This custom code is inserted at every layer change, right before the Z move. "
|
|
"Note that you can use placeholder variables for all Slic3r settings as well "
|
|
"as [layer_num] and [layer_z]."
|
|
msgstr ""
|
|
"This custom code is inserted at every layer change, right before the Z move. "
|
|
"Note that you can use placeholder variables for all Slic3r settings as well "
|
|
"as [layer_num] and [layer_z]."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:63
|
|
msgid "Between objects G-code"
|
|
msgstr "Between objects G-code"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:64
|
|
msgid ""
|
|
"This code is inserted between objects when using sequential printing. By "
|
|
"default extruder and bed temperature are reset using non-wait command; "
|
|
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
|
|
"will not add temperature commands. Note that you can use placeholder "
|
|
"variables for all Slic3r settings, so you can put a \"M109 "
|
|
"S[first_layer_temperature]\" command wherever you want."
|
|
msgstr ""
|
|
"This code is inserted between objects when using sequential printing. By "
|
|
"default extruder and bed temperature are reset using non-wait command; "
|
|
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
|
|
"will not add temperature commands. Note that you can use placeholder "
|
|
"variables for all Slic3r settings, so you can put a \"M109 "
|
|
"S[first_layer_temperature]\" command wherever you want."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:72
|
|
msgid "Bottom"
|
|
msgstr "Bottom"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:73
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:243
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:294
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:302
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:606
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:764
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:780
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:943
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:991
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1154
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1585
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1641
|
|
msgid "Layers and Perimeters"
|
|
msgstr "Layers and perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:74
|
|
msgid "Number of solid layers to generate on bottom surfaces."
|
|
msgstr "Number of solid layers to generate on bottom surfaces."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:76
|
|
msgid "Bottom solid layers"
|
|
msgstr "Bottom solid layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:81
|
|
msgid "Bridge"
|
|
msgstr "Bridge"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:82
|
|
msgid ""
|
|
"This is the acceleration your printer will use for bridges. Set zero to "
|
|
"disable acceleration control for bridges."
|
|
msgstr ""
|
|
"This is the acceleration your printer will use for bridges. Set zero to "
|
|
"disable acceleration control for bridges."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:84
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:178
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:578
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:686
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:954
|
|
msgid "mm/s\\u00B2"
|
|
msgstr "mm/s\\u00B2"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:90
|
|
msgid "Bridging angle"
|
|
msgstr "Bridging angle"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:91
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:251
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:492
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:506
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:544
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:683
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:693
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:711
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:729
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:748
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1265
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1282
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:347
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:348
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:664
|
|
msgid "Infill"
|
|
msgstr "Infill"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:92
|
|
msgid ""
|
|
"Bridging angle override. If left to zero, the bridging angle will be "
|
|
"calculated automatically. Otherwise the provided angle will be used for all "
|
|
"bridges. Use 180\\u00B0 for zero angle."
|
|
msgstr ""
|
|
"Bridging angle override. If left to zero, the bridging angle will be "
|
|
"calculated automatically. Otherwise the provided angle will be used for all "
|
|
"bridges. Use 180\\u00B0 for zero angle."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:95
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:496
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1172
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1183
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1403
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1559
|
|
msgid "\\u00B0"
|
|
msgstr "\\u00B0"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:101
|
|
msgid "Bridges fan speed"
|
|
msgstr "Bridges fan speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:102
|
|
msgid "This fan speed is enforced during all bridges and overhangs."
|
|
msgstr "This fan speed is enforced during all bridges and overhangs."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:103
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:508
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:791
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:852
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1062
|
|
msgid "%"
|
|
msgstr "%"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:110
|
|
msgid "Bridge flow ratio"
|
|
msgstr "Bridge flow ratio"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:111
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:212
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:738
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1735
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:343
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:357
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:450
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:453
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:830
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1112
|
|
msgid "Advanced"
|
|
msgstr "Advanced"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:112
|
|
msgid ""
|
|
"This factor affects the amount of plastic for bridging. You can decrease it "
|
|
"slightly to pull the extrudates and prevent sagging, although default "
|
|
"settings are usually good and you should experiment with cooling (use a fan) "
|
|
"before tweaking this."
|
|
msgstr ""
|
|
"This factor affects the amount of plastic for bridging. You can decrease it "
|
|
"slightly to pull the extrudates and prevent sagging, although default "
|
|
"settings are usually good and you should experiment with cooling (use a fan) "
|
|
"before tweaking this."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:121
|
|
msgid "Bridges"
|
|
msgstr "Bridges"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:122
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:282
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:637
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:749
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:981
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1203
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1253
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1304
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1627
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:399
|
|
msgid "Speed"
|
|
msgstr "Speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:123
|
|
msgid "Speed for printing bridges."
|
|
msgstr "Speed for printing bridges."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:124
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:640
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:751
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:813
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:870
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:983
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1139
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1148
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1538
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1651
|
|
msgid "mm/s"
|
|
msgstr "mm/s"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:131
|
|
msgid "Brim width"
|
|
msgstr "Brim width"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:132
|
|
msgid ""
|
|
"Horizontal width of the brim that will be printed around each object on the "
|
|
"first layer."
|
|
msgstr ""
|
|
"Horizontal width of the brim that will be printed around each object on the "
|
|
"first layer."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:139
|
|
msgid "Clip multi-part objects"
|
|
msgstr "Clip multi-part objects"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:140
|
|
msgid ""
|
|
"When printing multi-material objects, this settings will make slic3r to clip "
|
|
"the overlapping object parts one by the other (2nd part will be clipped by "
|
|
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
|
|
msgstr ""
|
|
"When printing multi-material objects, this settings will make slic3r to clip "
|
|
"the overlapping object parts one by the other (2nd part will be clipped by "
|
|
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:147
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:510
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:868
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1673
|
|
msgid "Compatible printers"
|
|
msgstr "Compatible printers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:151
|
|
msgid "Compatible printers condition"
|
|
msgstr "Compatible printers condition"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:152
|
|
msgid ""
|
|
"A boolean expression using the configuration values of an active printer "
|
|
"profile. If this expression evaluates to true, this profile is considered "
|
|
"compatible with the active printer profile."
|
|
msgstr ""
|
|
"A boolean expression using the configuration values of an active printer "
|
|
"profile. If this expression evaluates to true, this profile is considered "
|
|
"compatible with the active printer profile."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:158
|
|
msgid "Complete individual objects"
|
|
msgstr "Complete individual objects"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:159
|
|
msgid ""
|
|
"When printing multiple objects or copies, this feature will complete each "
|
|
"object before moving onto next one (and starting it from its bottom layer). "
|
|
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
|
|
"warn and prevent you from extruder collisions, but beware."
|
|
msgstr ""
|
|
"When printing multiple objects or copies, this feature will complete each "
|
|
"object before moving onto next one (and starting it from its bottom layer). "
|
|
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
|
|
"warn and prevent you from extruder collisions, but beware."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:167
|
|
msgid "Enable auto cooling"
|
|
msgstr "Enable auto cooling"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:168
|
|
msgid ""
|
|
"This flag enables the automatic cooling logic that adjusts print speed and "
|
|
"fan speed according to layer printing time."
|
|
msgstr ""
|
|
"This flag enables the automatic cooling logic that adjusts print speed and "
|
|
"fan speed according to layer printing time."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:174
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:293
|
|
msgid "Default"
|
|
msgstr "Default"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:175
|
|
msgid ""
|
|
"This is the acceleration your printer will be reset to after the role-"
|
|
"specific acceleration values are used (perimeter/infill). Set zero to "
|
|
"prevent resetting acceleration at all."
|
|
msgstr ""
|
|
"This is the acceleration your printer will be reset to after the role-"
|
|
"specific acceleration values are used (perimeter/infill). Set zero to "
|
|
"prevent resetting acceleration at all."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:184
|
|
msgid "Disable fan for the first"
|
|
msgstr "Disable fan for the first"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:185
|
|
msgid ""
|
|
"You can set this to a positive value to disable fan at all during the first "
|
|
"layers, so that it does not make adhesion worse."
|
|
msgstr ""
|
|
"You can set this to a positive value to disable fan at all during the first "
|
|
"layers, so that it does not make adhesion worse."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:187
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:696
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1035
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1226
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1287
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1439
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1484
|
|
msgid "layers"
|
|
msgstr "layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:194
|
|
msgid "Don't support bridges"
|
|
msgstr "Don't support bridges"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:195
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1032
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1382
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1389
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1401
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1411
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1419
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1434
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1455
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1466
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1482
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1491
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1500
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1511
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1527
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1535
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1536
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1545
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1553
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1567
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:375
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:376
|
|
msgid "Support material"
|
|
msgstr "Support material"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:196
|
|
msgid ""
|
|
"Experimental option for preventing support material from being generated "
|
|
"under bridged areas."
|
|
msgstr ""
|
|
"Experimental option for preventing support material from being generated "
|
|
"under bridged areas."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:202
|
|
msgid "Distance between copies"
|
|
msgstr "Distance between copies"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:203
|
|
msgid "Distance used for the auto-arrange feature of the plater."
|
|
msgstr "Distance used for the auto-arrange feature of the plater."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:211
|
|
msgid "Elefant foot compensation"
|
|
msgstr "Elefant foot compensation"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:213
|
|
msgid ""
|
|
"The first layer will be shrunk in the XY plane by the configured value to "
|
|
"compensate for the 1st layer squish aka an Elefant Foot effect."
|
|
msgstr ""
|
|
"The first layer will be shrunk in the XY plane by the configured value to "
|
|
"compensate for the 1st layer squish aka an Elefant Foot effect."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:221
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:231
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:852
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1125
|
|
msgid "End G-code"
|
|
msgstr "End G-code"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:222
|
|
msgid ""
|
|
"This end procedure is inserted at the end of the output file. Note that you "
|
|
"can use placeholder variables for all Slic3r settings."
|
|
msgstr ""
|
|
"This end procedure is inserted at the end of the output file. Note that you "
|
|
"can use placeholder variables for all Slic3r settings."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:232
|
|
msgid ""
|
|
"This end procedure is inserted at the end of the output file, before the "
|
|
"printer end gcode. Note that you can use placeholder variables for all "
|
|
"Slic3r settings. If you have multiple extruders, the gcode is processed in "
|
|
"extruder order."
|
|
msgstr ""
|
|
"This end procedure is inserted at the end of the output file, before the "
|
|
"printer end gcode. Note that you can use placeholder variables for all "
|
|
"Slic3r settings. If you have multiple extruders, the gcode is processed in "
|
|
"extruder order."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:242
|
|
msgid "Ensure vertical shell thickness"
|
|
msgstr "Ensure vertical shell thickness"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:244
|
|
msgid ""
|
|
"Add solid infill near sloping surfaces to guarantee the vertical shell "
|
|
"thickness (top+bottom solid layers)."
|
|
msgstr ""
|
|
"Add solid infill near sloping surfaces to guarantee the vertical shell "
|
|
"thickness (top+bottom solid layers)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:250
|
|
msgid "Top/bottom fill pattern"
|
|
msgstr "Top/bottom fill pattern"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:252
|
|
msgid ""
|
|
"Fill pattern for top/bottom infill. This only affects the external visible "
|
|
"layer, and not its adjacent solid shells."
|
|
msgstr ""
|
|
"Fill pattern for top/bottom infill. This only affects the external visible "
|
|
"layer, and not its adjacent solid shells."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:271
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:281
|
|
msgid "External perimeters"
|
|
msgstr "External perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:272
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:381
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:594
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:712
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:969
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1294
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1456
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1616
|
|
msgid "Extrusion Width"
|
|
msgstr "Extrusion width"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:273
|
|
msgid ""
|
|
"Set this to a non-zero value to set a manual extrusion width for external "
|
|
"perimeters. If left zero, default extrusion width will be used if set, "
|
|
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
|
|
"(for example 200%), it will be computed over layer height."
|
|
msgstr ""
|
|
"Set this to a non-zero value to set a manual extrusion width for external "
|
|
"perimeters. If left zero, default extrusion width will be used if set, "
|
|
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
|
|
"(for example 200%), it will be computed over layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:276
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:599
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:717
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:974
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1298
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1460
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1621
|
|
msgid "mm or % (leave 0 for default)"
|
|
msgstr "mm or % (leave 0 for default)"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:283
|
|
msgid ""
|
|
"This separate setting will affect the speed of external perimeters (the "
|
|
"visible ones). If expressed as percentage (for example: 80%) it will be "
|
|
"calculated on the perimeters speed setting above. Set to zero for auto."
|
|
msgstr ""
|
|
"This separate setting will affect the speed of external perimeters (the "
|
|
"visible ones). If expressed as percentage (for example: 80%) it will be "
|
|
"calculated on the perimeters speed setting above. Set to zero for auto."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:286
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:621
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1257
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1308
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1503
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1633
|
|
msgid "mm/s or %"
|
|
msgstr "mm/s or %"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:293
|
|
msgid "External perimeters first"
|
|
msgstr "External perimeters first"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:295
|
|
msgid ""
|
|
"Print contour perimeters from the outermost one to the innermost one instead "
|
|
"of the default inverse order."
|
|
msgstr ""
|
|
"Print contour perimeters from the outermost one to the innermost one instead "
|
|
"of the default inverse order."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:301
|
|
msgid "Extra perimeters if needed"
|
|
msgstr "Extra perimeters if needed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:303
|
|
#, c-format
|
|
msgid ""
|
|
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
|
|
"keeps adding perimeters, until more than 70% of the loop immediately above "
|
|
"is supported."
|
|
msgstr ""
|
|
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
|
|
"keeps adding perimeters, until more than 70% of the loop immediately above "
|
|
"is supported."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:311
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:794
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1231
|
|
msgid "Extruder"
|
|
msgstr "Extruder"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:313
|
|
msgid ""
|
|
"The extruder to use (unless more specific extruder settings are specified). "
|
|
"This value overrides perimeter and infill extruders, but not the support "
|
|
"extruders."
|
|
msgstr ""
|
|
"The extruder to use (unless more specific extruder settings are specified). "
|
|
"This value overrides perimeter and infill extruders, but not the support "
|
|
"extruders."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:324
|
|
msgid "Height"
|
|
msgstr "Height"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:325
|
|
msgid ""
|
|
"Set this to the vertical distance between your nozzle tip and (usually) the "
|
|
"X carriage rods. In other words, this is the height of the clearance "
|
|
"cylinder around your extruder, and it represents the maximum depth the "
|
|
"extruder can peek before colliding with other printed objects."
|
|
msgstr ""
|
|
"Set this to the vertical distance between your nozzle tip and (usually) the "
|
|
"X carriage rods. In other words, this is the height of the clearance "
|
|
"cylinder around your extruder, and it represents the maximum depth the "
|
|
"extruder can peek before colliding with other printed objects."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:335
|
|
msgid "Radius"
|
|
msgstr "Radius"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:336
|
|
msgid ""
|
|
"Set this to the clearance radius around your extruder. If the extruder is "
|
|
"not centered, choose the largest value for safety. This setting is used to "
|
|
"check for collisions and to display the graphical preview in the plater."
|
|
msgstr ""
|
|
"Set this to the clearance radius around your extruder. If the extruder is "
|
|
"not centered, choose the largest value for safety. This setting is used to "
|
|
"check for collisions and to display the graphical preview in the plater."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:346
|
|
msgid "Extruder Color"
|
|
msgstr "Extruder Color"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:347
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:410
|
|
msgid "This is only used in the Slic3r interface as a visual help."
|
|
msgstr "This is only used in the Slic3r interface as a visual help."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:354
|
|
msgid "Extruder offset"
|
|
msgstr "Extruders offset"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:355
|
|
msgid ""
|
|
"If your firmware doesn't handle the extruder displacement you need the G-"
|
|
"code to take it into account. This option lets you specify the displacement "
|
|
"of each extruder with respect to the first one. It expects positive "
|
|
"coordinates (they will be subtracted from the XY coordinate)."
|
|
msgstr ""
|
|
"If your firmware doesn't handle the extruder displacement you need the G-"
|
|
"code to take it into account. This option lets you specify the displacement "
|
|
"of each extruder with respect to the first one. It expects positive "
|
|
"coordinates (they will be subtracted from the XY coordinate)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:364
|
|
msgid "Extrusion axis"
|
|
msgstr "Extrusion axis"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:365
|
|
msgid ""
|
|
"Use this option to set the axis letter associated to your printer's extruder "
|
|
"(usually E but some printers use A)."
|
|
msgstr ""
|
|
"Use this option to set the axis letter associated to your printer's extruder "
|
|
"(usually E but some printers use A)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:371
|
|
msgid "Extrusion multiplier"
|
|
msgstr "Extrusion multiplier"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:372
|
|
msgid ""
|
|
"This factor changes the amount of flow proportionally. You may need to tweak "
|
|
"this setting to get nice surface finish and correct single wall widths. "
|
|
"Usual values are between 0.9 and 1.1. If you think you need to change this "
|
|
"more, check filament diameter and your firmware E steps."
|
|
msgstr ""
|
|
"This factor changes the amount of flow proportionally. You may need to tweak "
|
|
"this setting to get nice surface finish and correct single wall widths. "
|
|
"Usual values are between 0.9 and 1.1. If you think you need to change this "
|
|
"more, check filament diameter and your firmware E steps."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:380
|
|
msgid "Default extrusion width"
|
|
msgstr "Default extrusion width"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:382
|
|
msgid ""
|
|
"Set this to a non-zero value to allow a manual extrusion width. If left to "
|
|
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
|
|
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
|
|
"expressed as percentage (for example: 230%), it will be computed over layer "
|
|
"height."
|
|
msgstr ""
|
|
"Set this to a non-zero value to allow a manual extrusion width. If left to "
|
|
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
|
|
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
|
|
"expressed as percentage (for example: 230%), it will be computed over layer "
|
|
"height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:386
|
|
msgid "mm or % (leave 0 for auto)"
|
|
msgstr "mm or % (leave 0 for auto)"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:391
|
|
msgid "Keep fan always on"
|
|
msgstr "Keep fan always on"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:392
|
|
msgid ""
|
|
"If this is enabled, fan will never be disabled and will be kept running at "
|
|
"least at its minimum speed. Useful for PLA, harmful for ABS."
|
|
msgstr ""
|
|
"If this is enabled, fan will never be disabled and will be kept running at "
|
|
"least at its minimum speed. Useful for PLA, harmful for ABS."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:398
|
|
msgid "Enable fan if layer print time is below"
|
|
msgstr "Enable fan if layer print time is below"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:399
|
|
msgid ""
|
|
"If layer print time is estimated below this number of seconds, fan will be "
|
|
"enabled and its speed will be calculated by interpolating the minimum and "
|
|
"maximum speeds."
|
|
msgstr ""
|
|
"If layer print time is estimated below this number of seconds, fan will be "
|
|
"enabled and its speed will be calculated by interpolating the minimum and "
|
|
"maximum speeds."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:401
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1244
|
|
msgid "approximate seconds"
|
|
msgstr "approximate seconds"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:409
|
|
msgid "Color"
|
|
msgstr "Color"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:416
|
|
msgid "Filament notes"
|
|
msgstr "Filament notes"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:417
|
|
msgid "You can put your notes regarding the filament here."
|
|
msgstr "You can put your notes regarding the filament here."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:425
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:819
|
|
msgid "Max volumetric speed"
|
|
msgstr "Max volumetric speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:426
|
|
msgid ""
|
|
"Maximum volumetric speed allowed for this filament. Limits the maximum "
|
|
"volumetric speed of a print to the minimum of print and filament volumetric "
|
|
"speed. Set to zero for no limit."
|
|
msgstr ""
|
|
"Maximum volumetric speed allowed for this filament. Limits the maximum "
|
|
"volumetric speed of a print to the minimum of print and filament volumetric "
|
|
"speed. Set to zero for no limit."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:429
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:822
|
|
msgid "mm\\u00B3/s"
|
|
msgstr "mm\\u00B3/s"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:436
|
|
msgid ""
|
|
"Enter your filament diameter here. Good precision is required, so use a "
|
|
"caliper and do multiple measurements along the filament, then compute the "
|
|
"average."
|
|
msgstr ""
|
|
"Enter your filament diameter here. Good precision is required, so use a "
|
|
"caliper and do multiple measurements along the filament, then compute the "
|
|
"average."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:444
|
|
msgid "Density"
|
|
msgstr "Density"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:445
|
|
msgid ""
|
|
"Enter your filament density here. This is only for statistical information. "
|
|
"A decent way is to weigh a known length of filament and compute the ratio of "
|
|
"the length to volume. Better is to calculate the volume directly through "
|
|
"displacement."
|
|
msgstr ""
|
|
"Enter your filament density here. This is only for statistical information. "
|
|
"A decent way is to weigh a known length of filament and compute the ratio of "
|
|
"the length to volume. Better is to calculate the volume directly through "
|
|
"displacement."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:448
|
|
msgid "g/cm\\u00B3"
|
|
msgstr "g/cm\\u00B3"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:454
|
|
msgid "Filament type"
|
|
msgstr "Filament type"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:455
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1004
|
|
msgid ""
|
|
"If you want to process the output G-code through custom scripts, just list "
|
|
"their absolute paths here. Separate multiple scripts with a semicolon. "
|
|
"Scripts will be passed the absolute path to the G-code file as the first "
|
|
"argument, and they can access the Slic3r config settings by reading "
|
|
"environment variables."
|
|
msgstr ""
|
|
"If you want to process the output G-code through custom scripts, just list "
|
|
"their absolute paths here. Separate multiple scripts with a semicolon. "
|
|
"Scripts will be passed the absolute path to the G-code file as the first "
|
|
"argument, and they can access the Slic3r config settings by reading "
|
|
"environment variables."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:474
|
|
msgid "Soluble material"
|
|
msgstr "Soluble material"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:475
|
|
msgid "Soluble material is most likely used for a soluble support."
|
|
msgstr "Soluble material is most likely used for a soluble support."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:480
|
|
msgid "Cost"
|
|
msgstr "Cost"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:481
|
|
msgid ""
|
|
"Enter your filament cost per kg here. This is only for statistical "
|
|
"information."
|
|
msgstr ""
|
|
"Enter your filament cost per kg here. This is only for statistical "
|
|
"information."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:482
|
|
msgid "money/kg"
|
|
msgstr "money/kg"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:491
|
|
msgid "Fill angle"
|
|
msgstr "Fill angle"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:493
|
|
msgid ""
|
|
"Default base angle for infill orientation. Cross-hatching will be applied to "
|
|
"this. Bridges will be infilled using the best direction Slic3r can detect, "
|
|
"so this setting does not affect them."
|
|
msgstr ""
|
|
"Default base angle for infill orientation. Cross-hatching will be applied to "
|
|
"this. Bridges will be infilled using the best direction Slic3r can detect, "
|
|
"so this setting does not affect them."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:505
|
|
msgid "Fill density"
|
|
msgstr "Fill density"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:507
|
|
#, c-format
|
|
msgid "Density of internal infill, expressed in the range 0% - 100%."
|
|
msgstr "Density of internal infill, expressed in the range 0% - 100%."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:543
|
|
msgid "Fill pattern"
|
|
msgstr "Fill pattern"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:545
|
|
msgid "Fill pattern for general low-density infill."
|
|
msgstr "Fill pattern for general low-density infill."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:575
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:584
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:593
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:627
|
|
msgid "First layer"
|
|
msgstr "First layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:576
|
|
msgid ""
|
|
"This is the acceleration your printer will use for first layer. Set zero to "
|
|
"disable acceleration control for first layer."
|
|
msgstr ""
|
|
"This is the acceleration your printer will use for first layer. Set zero to "
|
|
"disable acceleration control for first layer."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:585
|
|
msgid ""
|
|
"Heated build plate temperature for the first layer. Set this to zero to "
|
|
"disable bed temperature control commands in the output."
|
|
msgstr ""
|
|
"Heated build plate temperature for the first layer. Set this to zero to "
|
|
"disable bed temperature control commands in the output."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:595
|
|
msgid ""
|
|
"Set this to a non-zero value to set a manual extrusion width for first "
|
|
"layer. You can use this to force fatter extrudates for better adhesion. If "
|
|
"expressed as percentage (for example 120%) it will be computed over first "
|
|
"layer height. If set to zero, it will use the default extrusion width."
|
|
msgstr ""
|
|
"Set this to a non-zero value to set a manual extrusion width for first "
|
|
"layer. You can use this to force fatter extrudates for better adhesion. If "
|
|
"expressed as percentage (for example 120%) it will be computed over first "
|
|
"layer height. If set to zero, it will use the default extrusion width."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:605
|
|
msgid "First layer height"
|
|
msgstr "First layer height"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:607
|
|
msgid ""
|
|
"When printing with very low layer heights, you might still want to print a "
|
|
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
|
|
"plates. This can be expressed as an absolute value or as a percentage (for "
|
|
"example: 150%) over the default layer height."
|
|
msgstr ""
|
|
"When printing with very low layer heights, you might still want to print a "
|
|
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
|
|
"plates. This can be expressed as an absolute value or as a percentage (for "
|
|
"example: 150%) over the default layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:611
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:742
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1392
|
|
msgid "mm or %"
|
|
msgstr "mm or %"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:617
|
|
msgid "First layer speed"
|
|
msgstr "First layer speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:618
|
|
msgid ""
|
|
"If expressed as absolute value in mm/s, this speed will be applied to all "
|
|
"the print moves of the first layer, regardless of their type. If expressed "
|
|
"as a percentage (for example: 40%) it will scale the default speeds."
|
|
msgstr ""
|
|
"If expressed as absolute value in mm/s, this speed will be applied to all "
|
|
"the print moves of the first layer, regardless of their type. If expressed "
|
|
"as a percentage (for example: 40%) it will scale the default speeds."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:628
|
|
msgid ""
|
|
"Extruder temperature for first layer. If you want to control temperature "
|
|
"manually during print, set this to zero to disable temperature control "
|
|
"commands in the output file."
|
|
msgstr ""
|
|
"Extruder temperature for first layer. If you want to control temperature "
|
|
"manually during print, set this to zero to disable temperature control "
|
|
"commands in the output file."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:636
|
|
msgid "Gap fill"
|
|
msgstr "Gap fill"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:638
|
|
msgid ""
|
|
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
|
|
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
|
|
"filling."
|
|
msgstr ""
|
|
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
|
|
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
|
|
"filling."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:646
|
|
msgid "Verbose G-code"
|
|
msgstr "Verbose G-code"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:647
|
|
msgid ""
|
|
"Enable this to get a commented G-code file, with each line explained by a "
|
|
"descriptive text. If you print from SD card, the additional weight of the "
|
|
"file could make your firmware slow down."
|
|
msgstr ""
|
|
"Enable this to get a commented G-code file, with each line explained by a "
|
|
"descriptive text. If you print from SD card, the additional weight of the "
|
|
"file could make your firmware slow down."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:654
|
|
msgid "G-code flavor"
|
|
msgstr "G-code flavor"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:655
|
|
msgid ""
|
|
"Some G/M-code commands, including temperature control and others, are not "
|
|
"universal. Set this option to your printer's firmware to get a compatible "
|
|
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
|
|
"extrusion value at all."
|
|
msgstr ""
|
|
"Some G/M-code commands, including temperature control and others, are not "
|
|
"universal. Set this option to your printer's firmware to get a compatible "
|
|
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
|
|
"extrusion value at all."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:684
|
|
msgid ""
|
|
"This is the acceleration your printer will use for infill. Set zero to "
|
|
"disable acceleration control for infill."
|
|
msgstr ""
|
|
"This is the acceleration your printer will use for infill. Set zero to "
|
|
"disable acceleration control for infill."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:692
|
|
msgid "Combine infill every"
|
|
msgstr "Combine infill every"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:694
|
|
msgid ""
|
|
"This feature allows to combine infill and speed up your print by extruding "
|
|
"thicker infill layers while preserving thin perimeters, thus accuracy."
|
|
msgstr ""
|
|
"This feature allows to combine infill and speed up your print by extruding "
|
|
"thicker infill layers while preserving thin perimeters, thus accuracy."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:698
|
|
msgid "Combine infill every n layers"
|
|
msgstr "Combine infill every n layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:703
|
|
msgid "Infill extruder"
|
|
msgstr "Infill extruder"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:705
|
|
msgid "The extruder to use when printing infill."
|
|
msgstr "The extruder to use when printing infill."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:713
|
|
msgid ""
|
|
"Set this to a non-zero value to set a manual extrusion width for infill. If "
|
|
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
|
|
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
|
|
"up the infill and make your parts stronger. If expressed as percentage (for "
|
|
"example 90%) it will be computed over layer height."
|
|
msgstr ""
|
|
"Set this to a non-zero value to set a manual extrusion width for infill. If "
|
|
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
|
|
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
|
|
"up the infill and make your parts stronger. If expressed as percentage (for "
|
|
"example 90%) it will be computed over layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:722
|
|
msgid "Infill before perimeters"
|
|
msgstr "Infill before perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:723
|
|
msgid ""
|
|
"This option will switch the print order of perimeters and infill, making the "
|
|
"latter first."
|
|
msgstr ""
|
|
"This option will switch the print order of perimeters and infill, making the "
|
|
"latter first."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:728
|
|
msgid "Only infill where needed"
|
|
msgstr "Only infill where needed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:730
|
|
msgid ""
|
|
"This option will limit infill to the areas actually needed for supporting "
|
|
"ceilings (it will act as internal support material). If enabled, slows down "
|
|
"the G-code generation due to the multiple checks involved."
|
|
msgstr ""
|
|
"This option will limit infill to the areas actually needed for supporting "
|
|
"ceilings (it will act as internal support material). If enabled, slows down "
|
|
"the G-code generation due to the multiple checks involved."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:737
|
|
msgid "Infill/perimeters overlap"
|
|
msgstr "Infill/perimeters overlap"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:739
|
|
msgid ""
|
|
"This setting applies an additional overlap between infill and perimeters for "
|
|
"better bonding. Theoretically this shouldn't be needed, but backlash might "
|
|
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
|
|
"perimeter extrusion width."
|
|
msgstr ""
|
|
"This setting applies an additional overlap between infill and perimeters for "
|
|
"better bonding. Theoretically this shouldn't be needed, but backlash might "
|
|
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
|
|
"perimeter extrusion width."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:750
|
|
msgid "Speed for printing the internal fill. Set to zero for auto."
|
|
msgstr "Speed for printing the internal fill. Set to zero for auto."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:759
|
|
msgid "Interface shells"
|
|
msgstr "Interface shells"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:760
|
|
msgid ""
|
|
"Force the generation of solid shells between adjacent materials/volumes. "
|
|
"Useful for multi-extruder prints with translucent materials or manual "
|
|
"soluble support material."
|
|
msgstr ""
|
|
"Force the generation of solid shells between adjacent materials/volumes. "
|
|
"Useful for multi-extruder prints with translucent materials or manual "
|
|
"soluble support material."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:768
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1137
|
|
msgid "After layer change G-code"
|
|
msgstr "After layer change G-code"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:769
|
|
msgid ""
|
|
"This custom code is inserted at every layer change, right after the Z move "
|
|
"and before the extruder moves to the first layer point. Note that you can "
|
|
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
|
|
"[layer_z]."
|
|
msgstr ""
|
|
"This custom code is inserted at every layer change, right after the Z move "
|
|
"and before the extruder moves to the first layer point. Note that you can "
|
|
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
|
|
"[layer_z]."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:779
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:315
|
|
msgid "Layer height"
|
|
msgstr "Layer height"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:781
|
|
msgid ""
|
|
"This setting controls the height (and thus the total number) of the slices/"
|
|
"layers. Thinner layers give better accuracy but take more time to print."
|
|
msgstr ""
|
|
"This setting controls the height (and thus the total number) of the slices/"
|
|
"layers. Thinner layers give better accuracy but take more time to print."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:789
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:798
|
|
msgid "Max"
|
|
msgstr "Max"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:790
|
|
msgid "This setting represents the maximum speed of your fan."
|
|
msgstr "This setting represents the maximum speed of your fan."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:799
|
|
#, c-format
|
|
msgid ""
|
|
"This is the highest printable layer height for this extruder, used to cap "
|
|
"the variable layer height and support layer height. Maximum recommended "
|
|
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
|
|
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
|
|
msgstr ""
|
|
"This is the highest printable layer height for this extruder, used to cap "
|
|
"the variable layer height and support layer height. Maximum recommended "
|
|
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
|
|
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:809
|
|
msgid "Max print speed"
|
|
msgstr "Max print speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:810
|
|
msgid ""
|
|
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
|
|
"speed in order to keep constant extruder pressure. This experimental setting "
|
|
"is used to set the highest print speed you want to allow."
|
|
msgstr ""
|
|
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
|
|
"speed in order to keep constant extruder pressure. This experimental setting "
|
|
"is used to set the highest print speed you want to allow."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:820
|
|
msgid ""
|
|
"This experimental setting is used to set the maximum volumetric speed your "
|
|
"extruder supports."
|
|
msgstr ""
|
|
"This experimental setting is used to set the maximum volumetric speed your "
|
|
"extruder supports."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:828
|
|
msgid "Max volumetric slope positive"
|
|
msgstr "Max volumetric slope positive"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:829
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:840
|
|
msgid ""
|
|
"This experimental setting is used to limit the speed of change in extrusion "
|
|
"rate. A value of 1.8 mm\\u00B3/s\\u00B2 ensures, that a change from the "
|
|
"extrusion rate of 1.8 mm\\u00B3/s (0.45mm extrusion width, 0.2mm extrusion "
|
|
"height, feedrate 20 mm/s) to 5.4 mm\\u00B3/s (feedrate 60 mm/s) will take at "
|
|
"least 2 seconds."
|
|
msgstr ""
|
|
"This experimental setting is used to limit the speed of change in extrusion "
|
|
"rate. A value of 1.8 mm\\u00B3/s\\u00B2 ensures, that a change from the "
|
|
"extrusion rate of 1.8 mm\\u00B3/s (0.45mm extrusion width, 0.2mm extrusion "
|
|
"height, feedrate 20 mm/s) to 5.4 mm\\u00B3/s (feedrate 60 mm/s) will take at "
|
|
"least 2 seconds."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:833
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:844
|
|
msgid "mm\\u00B3/s\\u00B2"
|
|
msgstr "mm\\u00B3/s\\u00B2"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:839
|
|
msgid "Max volumetric slope negative"
|
|
msgstr "Max volumetric slope negative"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:850
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:859
|
|
msgid "Min"
|
|
msgstr "Min"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:851
|
|
msgid "This setting represents the minimum PWM your fan needs to work."
|
|
msgstr "This setting represents the minimum PWM your fan needs to work."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:860
|
|
msgid ""
|
|
"This is the lowest printable layer height for this extruder and limits the "
|
|
"resolution for variable layer height. Typical values are between 0.05 mm and "
|
|
"0.1 mm."
|
|
msgstr ""
|
|
"This is the lowest printable layer height for this extruder and limits the "
|
|
"resolution for variable layer height. Typical values are between 0.05 mm and "
|
|
"0.1 mm."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:868
|
|
msgid "Min print speed"
|
|
msgstr "Min print speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:869
|
|
msgid "Slic3r will not scale speed down below this speed."
|
|
msgstr "Slic3r will not scale speed down below this speed."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:876
|
|
msgid "Minimum extrusion length"
|
|
msgstr "Minimum extrusion length"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:877
|
|
msgid ""
|
|
"Generate no less than the number of skirt loops required to consume the "
|
|
"specified amount of filament on the bottom layer. For multi-extruder "
|
|
"machines, this minimum applies to each extruder."
|
|
msgstr ""
|
|
"Generate no less than the number of skirt loops required to consume the "
|
|
"specified amount of filament on the bottom layer. For multi-extruder "
|
|
"machines, this minimum applies to each extruder."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:886
|
|
msgid "Configuration notes"
|
|
msgstr "Configuration notes"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:887
|
|
msgid ""
|
|
"You can put here your personal notes. This text will be added to the G-code "
|
|
"header comments."
|
|
msgstr ""
|
|
"You can put here your personal notes. This text will be added to the G-code "
|
|
"header comments."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:896
|
|
msgid "Nozzle diameter"
|
|
msgstr "Nozzle diameter"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:897
|
|
msgid ""
|
|
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
|
|
msgstr ""
|
|
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:903
|
|
msgid "API Key"
|
|
msgstr "API Key"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:904
|
|
msgid ""
|
|
"Slic3r can upload G-code files to OctoPrint. This field should contain the "
|
|
"API Key required for authentication."
|
|
msgstr ""
|
|
"Slic3r can upload G-code files to OctoPrint. This field should contain the "
|
|
"API Key required for authentication."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:910
|
|
msgid "Host or IP"
|
|
msgstr "Host or IP"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:911
|
|
msgid ""
|
|
"Slic3r can upload G-code files to OctoPrint. This field should contain the "
|
|
"hostname or IP address of the OctoPrint instance."
|
|
msgstr ""
|
|
"Slic3r can upload G-code files to OctoPrint. This field should contain the "
|
|
"hostname or IP address of the OctoPrint instance."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:917
|
|
msgid "Only retract when crossing perimeters"
|
|
msgstr "Only retract when crossing perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:918
|
|
msgid ""
|
|
"Disables retraction when the travel path does not exceed the upper layer's "
|
|
"perimeters (and thus any ooze will be probably invisible)."
|
|
msgstr ""
|
|
"Disables retraction when the travel path does not exceed the upper layer's "
|
|
"perimeters (and thus any ooze will be probably invisible)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:924
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1697
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:805
|
|
msgid "Enable"
|
|
msgstr "Enable"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:925
|
|
msgid ""
|
|
"This option will drop the temperature of the inactive extruders to prevent "
|
|
"oozing. It will enable a tall skirt automatically and move extruders outside "
|
|
"such skirt when changing temperatures."
|
|
msgstr ""
|
|
"This option will drop the temperature of the inactive extruders to prevent "
|
|
"oozing. It will enable a tall skirt automatically and move extruders outside "
|
|
"such skirt when changing temperatures."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:932
|
|
msgid "Output filename format"
|
|
msgstr "Output filename format"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:933
|
|
msgid ""
|
|
"You can use all configuration options as variables inside this template. For "
|
|
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
|
|
"[year], [month], [day], [hour], [minute], [second], [version], "
|
|
"[input_filename], [input_filename_base]."
|
|
msgstr ""
|
|
"You can use all configuration options as variables inside this template. For "
|
|
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
|
|
"[year], [month], [day], [hour], [minute], [second], [version], "
|
|
"[input_filename], [input_filename_base]."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:942
|
|
msgid "Detect bridging perimeters"
|
|
msgstr "Detect bridging perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:944
|
|
msgid ""
|
|
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
|
|
"to apply bridge speed to them and enable fan."
|
|
msgstr ""
|
|
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
|
|
"to apply bridge speed to them and enable fan."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:950
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:968
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:980
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:990
|
|
msgid "Perimeters"
|
|
msgstr "Perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:951
|
|
msgid ""
|
|
"This is the acceleration your printer will use for perimeters. A high value "
|
|
"like 9000 usually gives good results if your hardware is up to the job. Set "
|
|
"zero to disable acceleration control for perimeters."
|
|
msgstr ""
|
|
"This is the acceleration your printer will use for perimeters. A high value "
|
|
"like 9000 usually gives good results if your hardware is up to the job. Set "
|
|
"zero to disable acceleration control for perimeters."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:959
|
|
msgid "Perimeter extruder"
|
|
msgstr "Perimeter extruder"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:961
|
|
msgid ""
|
|
"The extruder to use when printing perimeters and brim. First extruder is 1."
|
|
msgstr ""
|
|
"The extruder to use when printing perimeters and brim. First extruder is 1."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:970
|
|
msgid ""
|
|
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
|
|
"You may want to use thinner extrudates to get more accurate surfaces. If "
|
|
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
|
|
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
|
|
"it will be computed over layer height."
|
|
msgstr ""
|
|
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
|
|
"You may want to use thinner extrudates to get more accurate surfaces. If "
|
|
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
|
|
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
|
|
"it will be computed over layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:982
|
|
msgid ""
|
|
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
|
|
msgstr ""
|
|
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:992
|
|
msgid ""
|
|
"This option sets the number of perimeters to generate for each layer. Note "
|
|
"that Slic3r may increase this number automatically when it detects sloping "
|
|
"surfaces which benefit from a higher number of perimeters if the Extra "
|
|
"Perimeters option is enabled."
|
|
msgstr ""
|
|
"This option sets the number of perimeters to generate for each layer. Note "
|
|
"that Slic3r may increase this number automatically when it detects sloping "
|
|
"surfaces which benefit from a higher number of perimeters if the Extra "
|
|
"Perimeters option is enabled."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:996
|
|
msgid "(minimum)"
|
|
msgstr "(minimum)"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1003
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:495
|
|
msgid "Post-processing scripts"
|
|
msgstr "Post-processing scripts"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1016
|
|
msgid "Printer notes"
|
|
msgstr "Printer notes"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1017
|
|
msgid "You can put your notes regarding the printer here."
|
|
msgstr "You can put your notes regarding the printer here."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1031
|
|
msgid "Raft layers"
|
|
msgstr "Raft layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1033
|
|
msgid ""
|
|
"The object will be raised by this number of layers, and support material "
|
|
"will be generated under it."
|
|
msgstr ""
|
|
"The object will be raised by this number of layers, and support material "
|
|
"will be generated under it."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1041
|
|
msgid "Resolution"
|
|
msgstr "Resolution"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1042
|
|
msgid ""
|
|
"Minimum detail resolution, used to simplify the input file for speeding up "
|
|
"the slicing job and reducing memory usage. High-resolution models often "
|
|
"carry more detail than printers can render. Set to zero to disable any "
|
|
"simplification and use full resolution from input."
|
|
msgstr ""
|
|
"Minimum detail resolution, used to simplify the input file for speeding up "
|
|
"the slicing job and reducing memory usage. High-resolution models often "
|
|
"carry more detail than printers can render. Set to zero to disable any "
|
|
"simplification and use full resolution from input."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1052
|
|
msgid "Minimum travel after retraction"
|
|
msgstr "Minimum travel after retraction"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1053
|
|
msgid ""
|
|
"Retraction is not triggered when travel moves are shorter than this length."
|
|
msgstr ""
|
|
"Retraction is not triggered when travel moves are shorter than this length."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1059
|
|
msgid "Retract amount before wipe"
|
|
msgstr "Retract amount before wipe"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1060
|
|
msgid ""
|
|
"With bowden extruders, it may be wise to do some amount of quick retract "
|
|
"before doing the wipe movement."
|
|
msgstr ""
|
|
"With bowden extruders, it may be wise to do some amount of quick retract "
|
|
"before doing the wipe movement."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1067
|
|
msgid "Retract on layer change"
|
|
msgstr "Retract on layer change"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1068
|
|
msgid "This flag enforces a retraction whenever a Z move is done."
|
|
msgstr "This flag enforces a retraction whenever a Z move is done."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1073
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1082
|
|
msgid "Length"
|
|
msgstr "Length"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1074
|
|
msgid "Retraction Length"
|
|
msgstr "Retraction Length"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1075
|
|
msgid ""
|
|
"When retraction is triggered, filament is pulled back by the specified "
|
|
"amount (the length is measured on raw filament, before it enters the "
|
|
"extruder)."
|
|
msgstr ""
|
|
"When retraction is triggered, filament is pulled back by the specified "
|
|
"amount (the length is measured on raw filament, before it enters the "
|
|
"extruder)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1077
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1087
|
|
msgid "mm (zero to disable)"
|
|
msgstr "mm (zero to disable)"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1083
|
|
msgid "Retraction Length (Toolchange)"
|
|
msgstr "Retraction Length (Toolchange)"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1084
|
|
msgid ""
|
|
"When retraction is triggered before changing tool, filament is pulled back "
|
|
"by the specified amount (the length is measured on raw filament, before it "
|
|
"enters the extruder)."
|
|
msgstr ""
|
|
"When retraction is triggered before changing tool, filament is pulled back "
|
|
"by the specified amount (the length is measured on raw filament, before it "
|
|
"enters the extruder)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1092
|
|
msgid "Lift Z"
|
|
msgstr "Lift Z"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1093
|
|
msgid ""
|
|
"If you set this to a positive value, Z is quickly raised every time a "
|
|
"retraction is triggered. When using multiple extruders, only the setting for "
|
|
"the first extruder will be considered."
|
|
msgstr ""
|
|
"If you set this to a positive value, Z is quickly raised every time a "
|
|
"retraction is triggered. When using multiple extruders, only the setting for "
|
|
"the first extruder will be considered."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1101
|
|
msgid "Above Z"
|
|
msgstr "Above Z"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1102
|
|
msgid "Only lift Z above"
|
|
msgstr "Only lift Z above"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1103
|
|
msgid ""
|
|
"If you set this to a positive value, Z lift will only take place above the "
|
|
"specified absolute Z. You can tune this setting for skipping lift on the "
|
|
"first layers."
|
|
msgstr ""
|
|
"If you set this to a positive value, Z lift will only take place above the "
|
|
"specified absolute Z. You can tune this setting for skipping lift on the "
|
|
"first layers."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1110
|
|
msgid "Below Z"
|
|
msgstr "Below Z"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1111
|
|
msgid "Only lift Z below"
|
|
msgstr "Only lift Z below"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1112
|
|
msgid ""
|
|
"If you set this to a positive value, Z lift will only take place below the "
|
|
"specified absolute Z. You can tune this setting for limiting lift to the "
|
|
"first layers."
|
|
msgstr ""
|
|
"If you set this to a positive value, Z lift will only take place below the "
|
|
"specified absolute Z. You can tune this setting for limiting lift to the "
|
|
"first layers."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1120
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1128
|
|
msgid "Extra length on restart"
|
|
msgstr "Extra length on restart"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1121
|
|
msgid ""
|
|
"When the retraction is compensated after the travel move, the extruder will "
|
|
"push this additional amount of filament. This setting is rarely needed."
|
|
msgstr ""
|
|
"When the retraction is compensated after the travel move, the extruder will "
|
|
"push this additional amount of filament. This setting is rarely needed."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1129
|
|
msgid ""
|
|
"When the retraction is compensated after changing tool, the extruder will "
|
|
"push this additional amount of filament."
|
|
msgstr ""
|
|
"When the retraction is compensated after changing tool, the extruder will "
|
|
"push this additional amount of filament."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1136
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1137
|
|
msgid "Retraction Speed"
|
|
msgstr "Retraction Speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1138
|
|
msgid "The speed for retractions (it only applies to the extruder motor)."
|
|
msgstr "The speed for retractions (it only applies to the extruder motor)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1144
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1145
|
|
msgid "Deretraction Speed"
|
|
msgstr "Deretraction Speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1146
|
|
msgid ""
|
|
"The speed for loading of a filament into extruder after retraction (it only "
|
|
"applies to the extruder motor). If left to zero, the retraction speed is "
|
|
"used."
|
|
msgstr ""
|
|
"The speed for loading of a filament into extruder after retraction (it only "
|
|
"applies to the extruder motor). If left to zero, the retraction speed is "
|
|
"used."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1153
|
|
msgid "Seam position"
|
|
msgstr "Seam position"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1155
|
|
msgid "Position of perimeters starting points."
|
|
msgstr "Position of perimeters starting points."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1171
|
|
msgid "Direction"
|
|
msgstr "Direction"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1173
|
|
msgid "Preferred direction of the seam"
|
|
msgstr "Preferred direction of the seam"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1174
|
|
msgid "Seam preferred direction"
|
|
msgstr "Seam preferred direction"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1182
|
|
msgid "Jitter"
|
|
msgstr "Jitter"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1184
|
|
msgid "Seam preferred direction jitter"
|
|
msgstr "Seam preferred direction jitter"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1185
|
|
msgid "Preferred direction of the seam - jitter"
|
|
msgstr "Preferred direction of the seam - jitter"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1195
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:989
|
|
msgid "Serial port"
|
|
msgstr "Serial port"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1196
|
|
msgid "USB/serial port for printer connection."
|
|
msgstr "USB/serial port for printer connection."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1204
|
|
msgid "Serial port speed"
|
|
msgstr "Serial port speed"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1205
|
|
msgid "Speed (baud) of USB/serial port for printer connection."
|
|
msgstr "Speed (baud) of USB/serial port for printer connection."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1214
|
|
msgid "Distance from object"
|
|
msgstr "Distance from object"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1215
|
|
msgid ""
|
|
"Distance between skirt and object(s). Set this to zero to attach the skirt "
|
|
"to the object(s) and get a brim for better adhesion."
|
|
msgstr ""
|
|
"Distance between skirt and object(s). Set this to zero to attach the skirt "
|
|
"to the object(s) and get a brim for better adhesion."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1223
|
|
msgid "Skirt height"
|
|
msgstr "Skirt height"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1224
|
|
msgid ""
|
|
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
|
|
"as a shield against drafts."
|
|
msgstr ""
|
|
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
|
|
"as a shield against drafts."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1231
|
|
msgid "Loops (minimum)"
|
|
msgstr "Loops (minimum)"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1232
|
|
msgid "Skirt Loops"
|
|
msgstr "Skirt Loops"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1233
|
|
msgid ""
|
|
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
|
|
"set, the number of loops might be greater than the one configured here. Set "
|
|
"this to zero to disable skirt completely."
|
|
msgstr ""
|
|
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
|
|
"set, the number of loops might be greater than the one configured here. Set "
|
|
"this to zero to disable skirt completely."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1241
|
|
msgid "Slow down if layer print time is below"
|
|
msgstr "Slow down if layer print time is below"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1242
|
|
msgid ""
|
|
"If layer print time is estimated below this number of seconds, print moves "
|
|
"speed will be scaled down to extend duration to this value."
|
|
msgstr ""
|
|
"If layer print time is estimated below this number of seconds, print moves "
|
|
"speed will be scaled down to extend duration to this value."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1252
|
|
msgid "Small perimeters"
|
|
msgstr "Small perimeters"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1254
|
|
msgid ""
|
|
"This separate setting will affect the speed of perimeters having radius <= "
|
|
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
|
|
"be calculated on the perimeters speed setting above. Set to zero for auto."
|
|
msgstr ""
|
|
"This separate setting will affect the speed of perimeters having radius <= "
|
|
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
|
|
"be calculated on the perimeters speed setting above. Set to zero for auto."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1264
|
|
msgid "Solid infill threshold area"
|
|
msgstr "Solid infill threshold area"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1266
|
|
msgid ""
|
|
"Force solid infill for regions having a smaller area than the specified "
|
|
"threshold."
|
|
msgstr ""
|
|
"Force solid infill for regions having a smaller area than the specified "
|
|
"threshold."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1267
|
|
msgid "mm\\u00B2"
|
|
msgstr "mm\\u00B2"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1273
|
|
msgid "Solid infill extruder"
|
|
msgstr "Solid infill extruder"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1275
|
|
msgid "The extruder to use when printing solid infill."
|
|
msgstr "The extruder to use when printing solid infill."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1281
|
|
msgid "Solid infill every"
|
|
msgstr "Solid infill every"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1283
|
|
msgid ""
|
|
"This feature allows to force a solid layer every given number of layers. "
|
|
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
|
|
"will automatically choose the maximum possible number of layers to combine "
|
|
"according to nozzle diameter and layer height."
|
|
msgstr ""
|
|
"This feature allows to force a solid layer every given number of layers. "
|
|
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
|
|
"will automatically choose the maximum possible number of layers to combine "
|
|
"according to nozzle diameter and layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1293
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1303
|
|
msgid "Solid infill"
|
|
msgstr "Solid infill"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1295
|
|
msgid ""
|
|
"Set this to a non-zero value to set a manual extrusion width for infill for "
|
|
"solid surfaces. If left zero, default extrusion width will be used if set, "
|
|
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
|
|
"(for example 90%) it will be computed over layer height."
|
|
msgstr ""
|
|
"Set this to a non-zero value to set a manual extrusion width for infill for "
|
|
"solid surfaces. If left zero, default extrusion width will be used if set, "
|
|
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
|
|
"(for example 90%) it will be computed over layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1305
|
|
msgid ""
|
|
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
|
|
"This can be expressed as a percentage (for example: 80%) over the default "
|
|
"infill speed above. Set to zero for auto."
|
|
msgstr ""
|
|
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
|
|
"This can be expressed as a percentage (for example: 80%) over the default "
|
|
"infill speed above. Set to zero for auto."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1316
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:331
|
|
msgid "Solid layers"
|
|
msgstr "Solid layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1317
|
|
msgid "Number of solid layers to generate on top and bottom surfaces."
|
|
msgstr "Number of solid layers to generate on top and bottom surfaces."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1324
|
|
msgid "Spiral vase"
|
|
msgstr "Spiral vase"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1325
|
|
msgid ""
|
|
"This feature will raise Z gradually while printing a single-walled object in "
|
|
"order to remove any visible seam. This option requires a single perimeter, "
|
|
"no infill, no top solid layers and no support material. You can still set "
|
|
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
|
|
"when printing more than an object."
|
|
msgstr ""
|
|
"This feature will raise Z gradually while printing a single-walled object in "
|
|
"order to remove any visible seam. This option requires a single perimeter, "
|
|
"no infill, no top solid layers and no support material. You can still set "
|
|
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
|
|
"when printing more than an object."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1334
|
|
msgid "Temperature variation"
|
|
msgstr "Temperature variation"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1335
|
|
msgid ""
|
|
"Temperature difference to be applied when an extruder is not active. Enables "
|
|
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
|
|
"wiped."
|
|
msgstr ""
|
|
"Temperature difference to be applied when an extruder is not active. Enables "
|
|
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
|
|
"wiped."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1344
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1359
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:846
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1119
|
|
msgid "Start G-code"
|
|
msgstr "Start G-code"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1345
|
|
msgid ""
|
|
"This start procedure is inserted at the beginning, after bed has reached the "
|
|
"target temperature and extruder just started heating, and before extruder "
|
|
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
|
|
"such commands will not be prepended automatically so you're free to "
|
|
"customize the order of heating commands and other custom actions. Note that "
|
|
"you can use placeholder variables for all Slic3r settings, so you can put a "
|
|
"\"M109 S[first_layer_temperature]\" command wherever you want."
|
|
msgstr ""
|
|
"This start procedure is inserted at the beginning, after bed has reached the "
|
|
"target temperature and extruder just started heating, and before extruder "
|
|
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
|
|
"such commands will not be prepended automatically so you're free to "
|
|
"customize the order of heating commands and other custom actions. Note that "
|
|
"you can use placeholder variables for all Slic3r settings, so you can put a "
|
|
"\"M109 S[first_layer_temperature]\" command wherever you want."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1360
|
|
msgid ""
|
|
"This start procedure is inserted at the beginning, after any printer start "
|
|
"gcode. This is used to override settings for a specific filament. If Slic3r "
|
|
"detects M104, M109, M140 or M190 in your custom codes, such commands will "
|
|
"not be prepended automatically so you're free to customize the order of "
|
|
"heating commands and other custom actions. Note that you can use placeholder "
|
|
"variables for all Slic3r settings, so you can put a \"M109 "
|
|
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
|
|
"extruders, the gcode is processed in extruder order."
|
|
msgstr ""
|
|
"This start procedure is inserted at the beginning, after any printer start "
|
|
"gcode. This is used to override settings for a specific filament. If Slic3r "
|
|
"detects M104, M109, M140 or M190 in your custom codes, such commands will "
|
|
"not be prepended automatically so you're free to customize the order of "
|
|
"heating commands and other custom actions. Note that you can use placeholder "
|
|
"variables for all Slic3r settings, so you can put a \"M109 "
|
|
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
|
|
"extruders, the gcode is processed in extruder order."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1375
|
|
msgid "Single Extruder Multi Material"
|
|
msgstr "Single Extruder Multi Material"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1376
|
|
msgid "The printer multiplexes filaments into a single hot end."
|
|
msgstr "The printer multiplexes filaments into a single hot end."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1381
|
|
msgid "Generate support material"
|
|
msgstr "Generate support material"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1383
|
|
msgid "Enable support material generation."
|
|
msgstr "Enable support material generation."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1388
|
|
msgid "XY separation between an object and its support"
|
|
msgstr "XY separation between an object and its support"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1390
|
|
msgid ""
|
|
"XY separation between an object and its support. If expressed as percentage "
|
|
"(for example 50%), it will be calculated over external perimeter width."
|
|
msgstr ""
|
|
"XY separation between an object and its support. If expressed as percentage "
|
|
"(for example 50%), it will be calculated over external perimeter width."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1400
|
|
msgid "Pattern angle"
|
|
msgstr "Pattern angle"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1402
|
|
msgid ""
|
|
"Use this setting to rotate the support material pattern on the horizontal "
|
|
"plane."
|
|
msgstr ""
|
|
"Use this setting to rotate the support material pattern on the horizontal "
|
|
"plane."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1410
|
|
msgid "Support on build plate only"
|
|
msgstr "Support on build plate only"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1412
|
|
msgid ""
|
|
"Only create support if it lies on a build plate. Don't create support on a "
|
|
"print."
|
|
msgstr ""
|
|
"Only create support if it lies on a build plate. Don't create support on a "
|
|
"print."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1418
|
|
msgid "Contact Z distance"
|
|
msgstr "Contact Z distance"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1420
|
|
msgid ""
|
|
"The vertical distance between object and support material interface. Setting "
|
|
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
|
|
"first object layer."
|
|
msgstr ""
|
|
"The vertical distance between object and support material interface. Setting "
|
|
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
|
|
"first object layer."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1433
|
|
msgid "Enforce support for the first"
|
|
msgstr "Enforce support for the first"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1435
|
|
msgid ""
|
|
"Generate support material for the specified number of layers counting from "
|
|
"bottom, regardless of whether normal support material is enabled or not and "
|
|
"regardless of any angle threshold. This is useful for getting more adhesion "
|
|
"of objects having a very thin or poor footprint on the build plate."
|
|
msgstr ""
|
|
"Generate support material for the specified number of layers counting from "
|
|
"bottom, regardless of whether normal support material is enabled or not and "
|
|
"regardless of any angle threshold. This is useful for getting more adhesion "
|
|
"of objects having a very thin or poor footprint on the build plate."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1441
|
|
msgid "Enforce support for the first n layers"
|
|
msgstr "Enforce support for the first n layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1446
|
|
msgid "Support material/raft/skirt extruder"
|
|
msgstr "Support material/raft/skirt extruder"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1448
|
|
msgid ""
|
|
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
|
|
"use the current extruder to minimize tool changes)."
|
|
msgstr ""
|
|
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
|
|
"use the current extruder to minimize tool changes)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1457
|
|
msgid ""
|
|
"Set this to a non-zero value to set a manual extrusion width for support "
|
|
"material. If left zero, default extrusion width will be used if set, "
|
|
"otherwise nozzle diameter will be used. If expressed as percentage (for "
|
|
"example 90%) it will be computed over layer height."
|
|
msgstr ""
|
|
"Set this to a non-zero value to set a manual extrusion width for support "
|
|
"material. If left zero, default extrusion width will be used if set, "
|
|
"otherwise nozzle diameter will be used. If expressed as percentage (for "
|
|
"example 90%) it will be computed over layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1465
|
|
msgid "Interface loops"
|
|
msgstr "Interface loops"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1467
|
|
msgid ""
|
|
"Cover the top contact layer of the supports with loops. Disabled by default."
|
|
msgstr ""
|
|
"Cover the top contact layer of the supports with loops. Disabled by default."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1472
|
|
msgid "Support material/raft interface extruder"
|
|
msgstr "Support material/raft interface extruder"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1474
|
|
msgid ""
|
|
"The extruder to use when printing support material interface (1+, 0 to use "
|
|
"the current extruder to minimize tool changes). This affects raft too."
|
|
msgstr ""
|
|
"The extruder to use when printing support material interface (1+, 0 to use "
|
|
"the current extruder to minimize tool changes). This affects raft too."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1481
|
|
msgid "Interface layers"
|
|
msgstr "Interface layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1483
|
|
msgid ""
|
|
"Number of interface layers to insert between the object(s) and support "
|
|
"material."
|
|
msgstr ""
|
|
"Number of interface layers to insert between the object(s) and support "
|
|
"material."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1490
|
|
msgid "Interface pattern spacing"
|
|
msgstr "Interface pattern spacing"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1492
|
|
msgid "Spacing between interface lines. Set zero to get a solid interface."
|
|
msgstr "Spacing between interface lines. Set zero to get a solid interface."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1499
|
|
msgid "Support material interface"
|
|
msgstr "Support material interface"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1501
|
|
msgid ""
|
|
"Speed for printing support material interface layers. If expressed as "
|
|
"percentage (for example 50%) it will be calculated over support material "
|
|
"speed."
|
|
msgstr ""
|
|
"Speed for printing support material interface layers. If expressed as "
|
|
"percentage (for example 50%) it will be calculated over support material "
|
|
"speed."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1510
|
|
msgid "Pattern"
|
|
msgstr "Pattern"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1512
|
|
msgid "Pattern used to generate support material."
|
|
msgstr "Pattern used to generate support material."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1526
|
|
msgid "Pattern spacing"
|
|
msgstr "Pattern spacing"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1528
|
|
msgid "Spacing between support material lines."
|
|
msgstr "Spacing between support material lines."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1537
|
|
msgid "Speed for printing support material."
|
|
msgstr "Speed for printing support material."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1544
|
|
msgid "Synchronize with object layers"
|
|
msgstr "Synchronize with object layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1546
|
|
msgid ""
|
|
"Synchronize support layers with the object print layers. This is useful with "
|
|
"multi-material printers, where the extruder switch is expensive."
|
|
msgstr ""
|
|
"Synchronize support layers with the object print layers. This is useful with "
|
|
"multi-material printers, where the extruder switch is expensive."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1552
|
|
msgid "Overhang threshold"
|
|
msgstr "Overhang threshold"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1554
|
|
msgid ""
|
|
"Support material will not be generated for overhangs whose slope angle "
|
|
"(90\\u00B0 = vertical) is above the given threshold. In other words, this "
|
|
"value represent the most horizontal slope (measured from the horizontal "
|
|
"plane) that you can print without support material. Set to zero for "
|
|
"automatic detection (recommended)."
|
|
msgstr ""
|
|
"Support material will not be generated for overhangs whose slope angle "
|
|
"(90\\u00B0 = vertical) is above the given threshold. In other words, this "
|
|
"value represent the most horizontal slope (measured from the horizontal "
|
|
"plane) that you can print without support material. Set to zero for "
|
|
"automatic detection (recommended)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1566
|
|
msgid "With sheath around the support"
|
|
msgstr "With sheath around the support"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1568
|
|
msgid ""
|
|
"Add a sheath (a single perimeter line) around the base support. This makes "
|
|
"the support more reliable, but also more difficult to remove."
|
|
msgstr ""
|
|
"Add a sheath (a single perimeter line) around the base support. This makes "
|
|
"the support more reliable, but also more difficult to remove."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1575
|
|
msgid ""
|
|
"Extruder temperature for layers after the first one. Set this to zero to "
|
|
"disable temperature control commands in the output."
|
|
msgstr ""
|
|
"Extruder temperature for layers after the first one. Set this to zero to "
|
|
"disable temperature control commands in the output."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1578
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:793
|
|
msgid "Temperature"
|
|
msgstr "Temperature"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1584
|
|
msgid "Detect thin walls"
|
|
msgstr "Detect thin walls"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1586
|
|
msgid ""
|
|
"Detect single-width walls (parts where two extrusions don't fit and we need "
|
|
"to collapse them into a single trace)."
|
|
msgstr ""
|
|
"Detect single-width walls (parts where two extrusions don't fit and we need "
|
|
"to collapse them into a single trace)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1592
|
|
msgid "Threads"
|
|
msgstr "Threads"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1593
|
|
msgid ""
|
|
"Threads are used to parallelize long-running tasks. Optimal threads number "
|
|
"is slightly above the number of available cores/processors."
|
|
msgstr ""
|
|
"Threads are used to parallelize long-running tasks. Optimal threads number "
|
|
"is slightly above the number of available cores/processors."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1604
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1143
|
|
msgid "Tool change G-code"
|
|
msgstr "Tool change G-code"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1605
|
|
msgid ""
|
|
"This custom code is inserted right before every extruder change. Note that "
|
|
"you can use placeholder variables for all Slic3r settings as well as "
|
|
"[previous_extruder] and [next_extruder]."
|
|
msgstr ""
|
|
"This custom code is inserted right before every extruder change. Note that "
|
|
"you can use placeholder variables for all Slic3r settings as well as "
|
|
"[previous_extruder] and [next_extruder]."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1615
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1626
|
|
msgid "Top solid infill"
|
|
msgstr "Top solid infill"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1617
|
|
msgid ""
|
|
"Set this to a non-zero value to set a manual extrusion width for infill for "
|
|
"top surfaces. You may want to use thinner extrudates to fill all narrow "
|
|
"regions and get a smoother finish. If left zero, default extrusion width "
|
|
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
|
|
"percentage (for example 90%) it will be computed over layer height."
|
|
msgstr ""
|
|
"Set this to a non-zero value to set a manual extrusion width for infill for "
|
|
"top surfaces. You may want to use thinner extrudates to fill all narrow "
|
|
"regions and get a smoother finish. If left zero, default extrusion width "
|
|
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
|
|
"percentage (for example 90%) it will be computed over layer height."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1628
|
|
msgid ""
|
|
"Speed for printing top solid layers (it only applies to the uppermost "
|
|
"external layers and not to their internal solid layers). You may want to "
|
|
"slow down this to get a nicer surface finish. This can be expressed as a "
|
|
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
|
|
"for auto."
|
|
msgstr ""
|
|
"Speed for printing top solid layers (it only applies to the uppermost "
|
|
"external layers and not to their internal solid layers). You may want to "
|
|
"slow down this to get a nicer surface finish. This can be expressed as a "
|
|
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
|
|
"for auto."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1640
|
|
msgid "Top"
|
|
msgstr "Top"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1642
|
|
msgid "Number of solid layers to generate on top surfaces."
|
|
msgstr "Number of solid layers to generate on top surfaces."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1644
|
|
msgid "Top solid layers"
|
|
msgstr "Top solid layers"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1649
|
|
msgid "Travel"
|
|
msgstr "Travel"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1650
|
|
msgid "Speed for travel moves (jumps between distant extrusion points)."
|
|
msgstr "Speed for travel moves (jumps between distant extrusion points)."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1658
|
|
msgid "Use firmware retraction"
|
|
msgstr "Use firmware retraction"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1659
|
|
msgid ""
|
|
"This experimental setting uses G10 and G11 commands to have the firmware "
|
|
"handle the retraction. This is only supported in recent Marlin."
|
|
msgstr ""
|
|
"This experimental setting uses G10 and G11 commands to have the firmware "
|
|
"handle the retraction. This is only supported in recent Marlin."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1665
|
|
msgid "Use relative E distances"
|
|
msgstr "Use relative E distances"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1666
|
|
msgid ""
|
|
"If your firmware requires relative E values, check this, otherwise leave it "
|
|
"unchecked. Most firmwares use absolute values."
|
|
msgstr ""
|
|
"If your firmware requires relative E values, check this, otherwise leave it "
|
|
"unchecked. Most firmwares use absolute values."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1672
|
|
msgid "Use volumetric E"
|
|
msgstr "Use volumetric E"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1673
|
|
msgid ""
|
|
"This experimental setting uses outputs the E values in cubic millimeters "
|
|
"instead of linear millimeters. If your firmware doesn't already know "
|
|
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
|
|
"T0' in your start G-code in order to turn volumetric mode on and use the "
|
|
"filament diameter associated to the filament selected in Slic3r. This is "
|
|
"only supported in recent Marlin."
|
|
msgstr ""
|
|
"This experimental setting uses outputs the E values in cubic millimeters "
|
|
"instead of linear millimeters. If your firmware doesn't already know "
|
|
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
|
|
"T0' in your start G-code in order to turn volumetric mode on and use the "
|
|
"filament diameter associated to the filament selected in Slic3r. This is "
|
|
"only supported in recent Marlin."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1683
|
|
msgid "Enable variable layer height feature"
|
|
msgstr "Enable variable layer height feature"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1684
|
|
msgid ""
|
|
"Some printers or printer setups may have difficulties printing with a "
|
|
"variable layer height. Enabled by default."
|
|
msgstr ""
|
|
"Some printers or printer setups may have difficulties printing with a "
|
|
"variable layer height. Enabled by default."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1690
|
|
msgid "Wipe while retracting"
|
|
msgstr "Wipe while retracting"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1691
|
|
msgid ""
|
|
"This flag will move the nozzle while retracting to minimize the possible "
|
|
"blob on leaky extruders."
|
|
msgstr ""
|
|
"This flag will move the nozzle while retracting to minimize the possible "
|
|
"blob on leaky extruders."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1698
|
|
msgid ""
|
|
"Multi material printers may need to prime or purge extruders on tool "
|
|
"changes. Extrude the excess material into the wipe tower."
|
|
msgstr ""
|
|
"Multi material printers may need to prime or purge extruders on tool "
|
|
"changes. Extrude the excess material into the wipe tower."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1704
|
|
msgid "Position X"
|
|
msgstr "Position X"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1705
|
|
msgid "X coordinate of the left front corner of a wipe tower"
|
|
msgstr "X coordinate of the left front corner of a wipe tower"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1711
|
|
msgid "Position Y"
|
|
msgstr "Position Y"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1712
|
|
msgid "Y coordinate of the left front corner of a wipe tower"
|
|
msgstr "Y coordinate of the left front corner of a wipe tower"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1718
|
|
msgid "Width"
|
|
msgstr "Width"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1719
|
|
msgid "Width of a wipe tower"
|
|
msgstr "Width of a wipe tower"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1725
|
|
msgid "Per color change depth"
|
|
msgstr "Per color change depth"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1726
|
|
msgid ""
|
|
"Depth of a wipe color per color change. For N colors, there will be maximum "
|
|
"(N-1) tool switches performed, therefore the total depth of the wipe tower "
|
|
"will be (N-1) times this value."
|
|
msgstr ""
|
|
"Depth of a wipe color per color change. For N colors, there will be maximum "
|
|
"(N-1) tool switches performed, therefore the total depth of the wipe tower "
|
|
"will be (N-1) times this value."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1734
|
|
msgid "XY Size Compensation"
|
|
msgstr "XY Size Compensation"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1736
|
|
msgid ""
|
|
"The object will be grown/shrunk in the XY plane by the configured value "
|
|
"(negative = inwards, positive = outwards). This might be useful for fine-"
|
|
"tuning hole sizes."
|
|
msgstr ""
|
|
"The object will be grown/shrunk in the XY plane by the configured value "
|
|
"(negative = inwards, positive = outwards). This might be useful for fine-"
|
|
"tuning hole sizes."
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1744
|
|
msgid "Z offset"
|
|
msgstr "Z offset"
|
|
|
|
#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1745
|
|
msgid ""
|
|
"This value will be added (or subtracted) from all the Z coordinates in the "
|
|
"output G-code. It is used to compensate for bad Z endstop position: for "
|
|
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
|
|
"print bed, set this to -0.3 (or fix your endstop)."
|
|
msgstr ""
|
|
"This value will be added (or subtracted) from all the Z coordinates in the "
|
|
"output G-code. It is used to compensate for bad Z endstop position: for "
|
|
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
|
|
"print bed, set this to -0.3 (or fix your endstop)."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:39
|
|
msgid "Shape"
|
|
msgstr "Shape"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:46
|
|
msgid "Rectangular"
|
|
msgstr "Rectangular"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:62
|
|
msgid "Circular"
|
|
msgstr "Circular"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:75
|
|
msgid "Load shape from STL..."
|
|
msgstr "Load shape from STL..."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:120
|
|
msgid "Settings"
|
|
msgstr "Settings"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:298
|
|
msgid "Choose a file to import bed shape from (STL/OBJ/AMF/PRUSA):"
|
|
msgstr "Choose a file to import bed shape from (STL/OBJ/AMF/PRUSA):"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:315
|
|
msgid "Error! "
|
|
msgstr "Error! "
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:324
|
|
msgid "The selected file contains no geometry."
|
|
msgstr "The selected file contains no geometry."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:328
|
|
msgid ""
|
|
"The selected file contains several disjoint areas. This is not supported."
|
|
msgstr ""
|
|
"The selected file contains several disjoint areas. This is not supported."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.hpp:42
|
|
msgid "Bed Shape"
|
|
msgstr "Bed Shape"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:468
|
|
msgid "Error"
|
|
msgstr "Error"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:473
|
|
msgid "Notice"
|
|
msgstr "Notice"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:50
|
|
msgid "Save current "
|
|
msgstr "Save current "
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:51
|
|
msgid "Delete this preset"
|
|
msgstr "Delete this preset"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:330
|
|
msgid "Horizontal shells"
|
|
msgstr "Horizontal shells"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:336
|
|
msgid "Quality (slower slicing)"
|
|
msgstr "Quality (slower slicing)"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:353
|
|
msgid "Reducing printing time"
|
|
msgstr "Reducing printing time"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:365
|
|
msgid "Skirt and brim"
|
|
msgstr "Skirt and brim"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:381
|
|
msgid "Raft"
|
|
msgstr "Raft"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:412
|
|
msgid "Speed for non-print moves"
|
|
msgstr "Speed for non-print moves"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:415
|
|
msgid "Modifiers"
|
|
msgstr "Modifiers"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:418
|
|
msgid "Acceleration control (advanced)"
|
|
msgstr "Acceleration control (advanced)"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:425
|
|
msgid "Autospeed (advanced)"
|
|
msgstr "Autospeed (advanced)"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:431
|
|
msgid "Multiple Extruders"
|
|
msgstr "Multiple Extruders"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:439
|
|
msgid "Ooze prevention"
|
|
msgstr "Ooze prevention"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:464
|
|
msgid "Overlap"
|
|
msgstr "Overlap"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:467
|
|
msgid "Flow"
|
|
msgstr "Flow"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:470
|
|
msgid "Other"
|
|
msgstr "Other"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:477
|
|
msgid "Output options"
|
|
msgstr "Output options"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:478
|
|
msgid "Sequential printing"
|
|
msgstr "Sequential printing"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:501
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:502
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:858
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:859
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1155
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1156
|
|
msgid "Notes"
|
|
msgstr "Notes"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:508
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:866
|
|
msgid "Dependencies"
|
|
msgstr "Dependencies"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:509
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:867
|
|
msgid "Profile dependencies"
|
|
msgstr "Profile dependencies"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:799
|
|
msgid "Bed"
|
|
msgstr "Bed"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:804
|
|
msgid "Cooling"
|
|
msgstr "Cooling"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:816
|
|
msgid "Fan settings"
|
|
msgstr "Fan settings"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:835
|
|
msgid "Print speed override"
|
|
msgstr "Print speed override"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:845
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1118
|
|
msgid "Custom G-code"
|
|
msgstr "Custom G-code"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:936
|
|
msgid "General"
|
|
msgstr "General"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:937
|
|
msgid "Size and coordinates"
|
|
msgstr "Size and coordinates"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:941
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1642
|
|
msgid "Set"
|
|
msgstr "Set"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:961
|
|
msgid "Capabilities"
|
|
msgstr "Capabilities"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1003
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1071
|
|
msgid "Test"
|
|
msgstr "Test"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1016
|
|
msgid "Connection to printer works correctly."
|
|
msgstr "Connection to printer works correctly."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1016
|
|
msgid "Success!"
|
|
msgstr "Success!"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1019
|
|
msgid "Connection failed."
|
|
msgstr "Connection failed."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1031
|
|
msgid "OctoPrint upload"
|
|
msgstr "OctoPrint upload"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1034
|
|
msgid "Browse"
|
|
msgstr "Browse"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1046
|
|
msgid "Button BROWSE was clicked!"
|
|
msgstr "Button BROWSE was clicked!"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1081
|
|
msgid "Button TEST was clicked!"
|
|
msgstr "Button TEST was clicked!"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1109
|
|
msgid "Firmware"
|
|
msgstr "Firmware"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1191
|
|
msgid "Layer height limits"
|
|
msgstr "Layer height limits"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1196
|
|
msgid "Position (for multi-extruder printers)"
|
|
msgstr "Position (for multi-extruder printers)"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1215
|
|
msgid ""
|
|
"Retraction when tool is disabled (advanced settings for multi-extruder "
|
|
"setups)"
|
|
msgstr ""
|
|
"Retraction when tool is disabled (advanced settings for multi-extruder "
|
|
"setups)"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1219
|
|
msgid "Preview"
|
|
msgstr "Preview"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1310
|
|
msgid ""
|
|
"The Wipe option is not available when using the Firmware Retraction mode.\n"
|
|
"\n"
|
|
"Shall I disable it in order to enable Firmware Retraction?"
|
|
msgstr ""
|
|
"The Wipe option is not available when using the Firmware Retraction mode.\n"
|
|
"\n"
|
|
"Shall I disable it in order to enable Firmware Retraction?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1558
|
|
msgid "The supplied name is empty. It can't be saved."
|
|
msgstr "The supplied name is empty. It can't be saved."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1569
|
|
msgid "Something is wrong. It can't be saved."
|
|
msgstr "Something is wrong. It can't be saved."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1586
|
|
msgid "remove"
|
|
msgstr "remove"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1586
|
|
msgid "delete"
|
|
msgstr "delete"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1587
|
|
msgid "Are you sure you want to "
|
|
msgstr "Are you sure you want to "
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1587
|
|
msgid " the selected preset?"
|
|
msgstr " the selected preset?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1588
|
|
msgid "Remove"
|
|
msgstr "Remove"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1588
|
|
msgid "Delete"
|
|
msgstr "Delete"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1589
|
|
msgid " Preset"
|
|
msgstr " Preset"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1641
|
|
msgid "All"
|
|
msgstr "All"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1672
|
|
msgid "Select the printers this profile is compatible with."
|
|
msgstr "Select the printers this profile is compatible with."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1756
|
|
msgid "Save "
|
|
msgstr "Save "
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1756
|
|
msgid " as:"
|
|
msgstr " as:"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1790
|
|
msgid ""
|
|
"The supplied name is not valid; the following characters are not allowed:"
|
|
msgstr ""
|
|
"The supplied name is not valid; the following characters are not allowed:"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1793
|
|
msgid "The supplied name is not available."
|
|
msgstr "The supplied name is not available."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:182
|
|
msgid "Print Settings"
|
|
msgstr "Print Settings"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:202
|
|
msgid "Filament Settings"
|
|
msgstr "Filament Settings"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:248
|
|
msgid "Save preset"
|
|
msgstr "Save preset"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Field.cpp:35
|
|
msgid "default"
|
|
msgstr "default"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:71
|
|
msgid "Custom"
|
|
msgstr "Custom"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:212
|
|
msgid "Array of language names and identifiers should have the same size."
|
|
msgstr "Array of language names and identifiers should have the same size."
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:223
|
|
msgid "Select the language"
|
|
msgstr "Select the language"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:223
|
|
msgid "Language"
|
|
msgstr "Language"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:321
|
|
msgid "Change Application Language"
|
|
msgstr "Change Application Language"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:314
|
|
msgid "Layers and perimeters"
|
|
msgstr "Layers and perimeters"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:319
|
|
msgid "Vertical shells"
|
|
msgstr "Vertical shells"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:366
|
|
msgid "Skirt"
|
|
msgstr "Skirt"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:372
|
|
msgid "Brim"
|
|
msgstr "Brim"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:385
|
|
msgid "Options for support material and raft"
|
|
msgstr "Options for support material and raft"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:400
|
|
msgid "Speed for print moves"
|
|
msgstr "Speed for print moves"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:443
|
|
msgid "Wipe tower"
|
|
msgstr "Wipe tower"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:454
|
|
msgid "Extrusion width"
|
|
msgstr "Extrusion width"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:480
|
|
msgid "Extruder clearance (mm)"
|
|
msgstr "Extruder clearance (mm)"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:489
|
|
msgid "Output file"
|
|
msgstr "Output file"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:534
|
|
#, c-format
|
|
msgid ""
|
|
"The Spiral Vase mode requires:\n"
|
|
"- one perimeter\n"
|
|
"- no top solid layers\n"
|
|
"- 0% fill density\n"
|
|
"- no support material\n"
|
|
"- no ensure_vertical_shell_thickness\n"
|
|
"\n"
|
|
"Shall I adjust those settings in order to enable Spiral Vase?"
|
|
msgstr ""
|
|
"The Spiral Vase mode requires:\n"
|
|
"- one perimeter\n"
|
|
"- no top solid layers\n"
|
|
"- 0% fill density\n"
|
|
"- no support material\n"
|
|
"- no ensure_vertical_shell_thickness\n"
|
|
"\n"
|
|
"Shall I adjust those settings in order to enable Spiral Vase?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:541
|
|
msgid "Spiral Vase"
|
|
msgstr "Spiral Vase"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:560
|
|
msgid ""
|
|
"The Wipe Tower currently supports only:\n"
|
|
"- first layer height 0.2mm\n"
|
|
"- layer height from 0.15mm to 0.35mm\n"
|
|
"\n"
|
|
"Shall I adjust those settings in order to enable the Wipe Tower?"
|
|
msgstr ""
|
|
"The Wipe Tower currently supports only:\n"
|
|
"- first layer height 0.2mm\n"
|
|
"- layer height from 0.15mm to 0.35mm\n"
|
|
"\n"
|
|
"Shall I adjust those settings in order to enable the Wipe Tower?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:564
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:585
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:602
|
|
msgid "Wipe Tower"
|
|
msgstr "Wipe tower"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:581
|
|
msgid ""
|
|
"The Wipe Tower currently supports the non-soluble supports only\n"
|
|
"if they are printed with the current extruder without triggering a tool "
|
|
"change.\n"
|
|
"(both support_material_extruder and support_material_interface_extruder need "
|
|
"to be set to 0).\n"
|
|
"\n"
|
|
"Shall I adjust those settings in order to enable the Wipe Tower?"
|
|
msgstr ""
|
|
"The Wipe Tower currently supports the non-soluble supports only\n"
|
|
"if they are printed with the current extruder without triggering a tool "
|
|
"change.\n"
|
|
"(both support_material_extruder and support_material_interface_extruder need "
|
|
"to be set to 0).\n"
|
|
"\n"
|
|
"Shall I adjust those settings in order to enable the Wipe Tower?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:599
|
|
msgid ""
|
|
"For the Wipe Tower to work with the soluble supports, the support layers\n"
|
|
"need to be synchronized with the object layers.\n"
|
|
"\n"
|
|
"Shall I synchronize support layers in order to enable the Wipe Tower?"
|
|
msgstr ""
|
|
"For the Wipe Tower to work with the soluble supports, the support layers\n"
|
|
"need to be synchronized with the object layers.\n"
|
|
"\n"
|
|
"Shall I synchronize support layers in order to enable the Wipe Tower?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:617
|
|
msgid ""
|
|
"Supports work better, if the following feature is enabled:\n"
|
|
"- Detect bridging perimeters\n"
|
|
"\n"
|
|
"Shall I adjust those settings for supports?"
|
|
msgstr ""
|
|
"Supports work better, if the following feature is enabled:\n"
|
|
"- Detect bridging perimeters\n"
|
|
"\n"
|
|
"Shall I adjust those settings for supports?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:620
|
|
msgid "Support Generator"
|
|
msgstr "Support Generator"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662
|
|
msgid "The "
|
|
msgstr "The "
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662
|
|
#, c-format
|
|
msgid ""
|
|
" infill pattern is not supposed to work at 100% density.\n"
|
|
"\n"
|
|
"Shall I switch to rectilinear fill pattern?"
|
|
msgstr ""
|
|
" infill pattern is not supposed to work at 100% density.\n"
|
|
"\n"
|
|
"Shall I switch to rectilinear fill pattern?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:785
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:786
|
|
msgid "Filament"
|
|
msgstr "Filament"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:817
|
|
msgid "Fan speed"
|
|
msgstr "Fan speed"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:825
|
|
msgid "Cooling thresholds"
|
|
msgstr "Cooling thresholds"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:831
|
|
msgid "Filament properties"
|
|
msgstr "Filament properties"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:988
|
|
msgid "USB/Serial connection"
|
|
msgstr "USB/Serial connection"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:994
|
|
msgid "Rescan serial ports"
|
|
msgstr "Rescan serial ports"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1149
|
|
msgid "Between objects G-code (for sequential printing)"
|
|
msgstr "Between objects G-code (for sequential printing)"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1185
|
|
msgid "Extruder "
|
|
msgstr "Extruder "
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1199
|
|
msgid "Retraction"
|
|
msgstr "Retraction"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1202
|
|
msgid "Only lift Z"
|
|
msgstr "Only lift Z"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1312
|
|
msgid "Firmware Retraction"
|
|
msgstr "Firmware Retraction"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1467
|
|
msgid "Default "
|
|
msgstr "Default "
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1467
|
|
msgid " preset"
|
|
msgstr " preset"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1468
|
|
msgid " preset\n"
|
|
msgstr " preset\n"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1486
|
|
msgid ""
|
|
"\n"
|
|
"\n"
|
|
"is not compatible with printer\n"
|
|
msgstr ""
|
|
"\n"
|
|
"\n"
|
|
"is not compatible with printer\n"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1486
|
|
msgid ""
|
|
"\n"
|
|
"\n"
|
|
"and it has the following unsaved changes:"
|
|
msgstr ""
|
|
"\n"
|
|
"\n"
|
|
"and it has the following unsaved changes:"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1487
|
|
msgid ""
|
|
"\n"
|
|
"\n"
|
|
"has the following unsaved changes:"
|
|
msgstr ""
|
|
"\n"
|
|
"\n"
|
|
"has the following unsaved changes:"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1489
|
|
msgid ""
|
|
"\n"
|
|
"\n"
|
|
"Discard changes and continue anyway?"
|
|
msgstr ""
|
|
"\n"
|
|
"\n"
|
|
"Discard changes and continue anyway?"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1490
|
|
msgid "Unsaved Changes"
|
|
msgstr "Unsaved Changes"
|
|
|
|
#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:228
|
|
msgid "Printer Settings"
|
|
msgstr "Printer Settings"
|