463 lines
21 KiB
Perl
463 lines
21 KiB
Perl
package Slic3r::Layer::PerimeterGenerator;
|
||
use Moo;
|
||
|
||
use Slic3r::ExtrusionLoop ':roles';
|
||
use Slic3r::ExtrusionPath ':roles';
|
||
use Slic3r::Geometry qw(scale unscale chained_path);
|
||
use Slic3r::Geometry::Clipper qw(union_ex diff diff_ex intersection_ex offset offset2
|
||
offset_ex offset2_ex union_pt intersection_ppl diff_ppl);
|
||
use Slic3r::Surface ':types';
|
||
|
||
has 'slices' => (is => 'ro', required => 1); # SurfaceCollection
|
||
has 'lower_slices' => (is => 'ro', required => 0);
|
||
has 'layer_height' => (is => 'ro', required => 1);
|
||
has 'layer_id' => (is => 'ro', required => 0, default => sub { -1 });
|
||
has 'perimeter_flow' => (is => 'ro', required => 1);
|
||
has 'ext_perimeter_flow' => (is => 'ro', required => 1);
|
||
has 'overhang_flow' => (is => 'ro', required => 1);
|
||
has 'solid_infill_flow' => (is => 'ro', required => 1);
|
||
has 'config' => (is => 'ro', default => sub { Slic3r::Config::PrintRegion->new });
|
||
has 'print_config' => (is => 'ro', default => sub { Slic3r::Config::Print->new });
|
||
has '_lower_slices_p' => (is => 'rw', default => sub { [] });
|
||
has '_holes_pt' => (is => 'rw');
|
||
has '_ext_mm3_per_mm' => (is => 'rw');
|
||
has '_mm3_per_mm' => (is => 'rw');
|
||
has '_mm3_per_mm_overhang' => (is => 'rw');
|
||
has '_thin_wall_polylines' => (is => 'rw', default => sub { [] });
|
||
|
||
# generated loops will be put here
|
||
has 'loops' => (is => 'ro', default => sub { Slic3r::ExtrusionPath::Collection->new });
|
||
|
||
# generated gap fills will be put here
|
||
has 'gap_fill' => (is => 'ro', default => sub { Slic3r::ExtrusionPath::Collection->new });
|
||
|
||
# generated fill surfaces will be put here
|
||
has 'fill_surfaces' => (is => 'ro', default => sub { Slic3r::Surface::Collection->new });
|
||
|
||
sub BUILDARGS {
|
||
my ($class, %args) = @_;
|
||
|
||
if (my $flow = delete $args{flow}) {
|
||
$args{perimeter_flow} //= $flow;
|
||
$args{ext_perimeter_flow} //= $flow;
|
||
$args{overhang_flow} //= $flow;
|
||
$args{solid_infill_flow} //= $flow;
|
||
}
|
||
|
||
return { %args };
|
||
}
|
||
|
||
sub process {
|
||
my ($self) = @_;
|
||
|
||
# other perimeters
|
||
$self->_mm3_per_mm($self->perimeter_flow->mm3_per_mm);
|
||
my $pwidth = $self->perimeter_flow->scaled_width;
|
||
my $pspacing = $self->perimeter_flow->scaled_spacing;
|
||
|
||
# external perimeters
|
||
$self->_ext_mm3_per_mm($self->ext_perimeter_flow->mm3_per_mm);
|
||
my $ext_pwidth = $self->ext_perimeter_flow->scaled_width;
|
||
my $ext_pspacing = scale($self->ext_perimeter_flow->spacing_to($self->perimeter_flow));
|
||
|
||
# overhang perimeters
|
||
$self->_mm3_per_mm_overhang($self->overhang_flow->mm3_per_mm);
|
||
|
||
# solid infill
|
||
my $ispacing = $self->solid_infill_flow->scaled_spacing;
|
||
my $gap_area_threshold = $pwidth ** 2;
|
||
|
||
# Calculate the minimum required spacing between two adjacent traces.
|
||
# This should be equal to the nominal flow spacing but we experiment
|
||
# with some tolerance in order to avoid triggering medial axis when
|
||
# some squishing might work. Loops are still spaced by the entire
|
||
# flow spacing; this only applies to collapsing parts.
|
||
my $min_spacing = $pspacing * (1 - &Slic3r::INSET_OVERLAP_TOLERANCE);
|
||
my $ext_min_spacing = $ext_pspacing * (1 - &Slic3r::INSET_OVERLAP_TOLERANCE);
|
||
|
||
# prepare grown lower layer slices for overhang detection
|
||
if ($self->lower_slices && $self->config->overhangs) {
|
||
# We consider overhang any part where the entire nozzle diameter is not supported by the
|
||
# lower layer, so we take lower slices and offset them by half the nozzle diameter used
|
||
# in the current layer
|
||
my $nozzle_diameter = $self->print_config->get_at('nozzle_diameter', $self->config->perimeter_extruder-1);
|
||
|
||
$self->_lower_slices_p(
|
||
offset([ map @$_, @{$self->lower_slices} ], scale +$nozzle_diameter/2)
|
||
);
|
||
}
|
||
|
||
# we need to process each island separately because we might have different
|
||
# extra perimeters for each one
|
||
foreach my $surface (@{$self->slices}) {
|
||
my @contours = (); # array of Polygons with ccw orientation
|
||
my @holes = (); # array of Polygons with cw orientation
|
||
my @thin_walls = (); # array of ExPolygons
|
||
|
||
# detect how many perimeters must be generated for this island
|
||
my $loop_number = $self->config->perimeters + ($surface->extra_perimeters || 0);
|
||
|
||
my @last = @{$surface->expolygon};
|
||
my @gaps = (); # array of ExPolygons
|
||
if ($loop_number > 0) {
|
||
# we loop one time more than needed in order to find gaps after the last perimeter was applied
|
||
for my $i (1 .. ($loop_number+1)) { # outer loop is 1
|
||
my @offsets = ();
|
||
if ($i == 1) {
|
||
# the minimum thickness of a single loop is:
|
||
# ext_width/2 + ext_spacing/2 + spacing/2 + width/2
|
||
if ($self->config->thin_walls) {
|
||
@offsets = @{offset2(
|
||
\@last,
|
||
-(0.5*$ext_pwidth + 0.5*$ext_min_spacing - 1),
|
||
+(0.5*$ext_min_spacing - 1),
|
||
)};
|
||
} else {
|
||
@offsets = @{offset(
|
||
\@last,
|
||
-0.5*$ext_pwidth,
|
||
)};
|
||
}
|
||
|
||
# look for thin walls
|
||
if ($self->config->thin_walls) {
|
||
my $diff = diff_ex(
|
||
\@last,
|
||
offset(\@offsets, +0.5*$ext_pwidth),
|
||
1, # medial axis requires non-overlapping geometry
|
||
);
|
||
push @thin_walls, @$diff;
|
||
}
|
||
} else {
|
||
my $distance = ($i == 2) ? $ext_pspacing : $pspacing;
|
||
|
||
if ($self->config->thin_walls) {
|
||
@offsets = @{offset2(
|
||
\@last,
|
||
-($distance + 0.5*$min_spacing - 1),
|
||
+(0.5*$min_spacing - 1),
|
||
)};
|
||
} else {
|
||
@offsets = @{offset(
|
||
\@last,
|
||
-$distance,
|
||
)};
|
||
}
|
||
|
||
# look for gaps
|
||
if ($self->config->gap_fill_speed > 0 && $self->config->fill_density > 0) {
|
||
# not using safety offset here would "detect" very narrow gaps
|
||
# (but still long enough to escape the area threshold) that gap fill
|
||
# won't be able to fill but we'd still remove from infill area
|
||
my $diff = diff_ex(
|
||
offset(\@last, -0.5*$pspacing),
|
||
offset(\@offsets, +0.5*$pspacing + 10), # safety offset
|
||
);
|
||
push @gaps, grep abs($_->area) >= $gap_area_threshold, @$diff;
|
||
}
|
||
}
|
||
|
||
last if !@offsets;
|
||
last if $i > $loop_number; # we were only looking for gaps this time
|
||
|
||
# clone polygons because these ExPolygons will go out of scope very soon
|
||
@last = @offsets;
|
||
foreach my $polygon (@offsets) {
|
||
if ($polygon->is_counter_clockwise) {
|
||
push @contours, $polygon;
|
||
} else {
|
||
push @holes, $polygon;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
# fill gaps
|
||
if (@gaps) {
|
||
if (0) {
|
||
require "Slic3r/SVG.pm";
|
||
Slic3r::SVG::output(
|
||
"gaps.svg",
|
||
expolygons => \@gaps,
|
||
);
|
||
}
|
||
|
||
# where $pwidth < thickness < 2*$pspacing, infill with width = 1.5*$pwidth
|
||
# where 0.5*$pwidth < thickness < $pwidth, infill with width = 0.5*$pwidth
|
||
my @gap_sizes = (
|
||
[ $pwidth, 2*$pspacing, unscale 1.5*$pwidth ],
|
||
[ 0.5*$pwidth, $pwidth, unscale 0.5*$pwidth ],
|
||
);
|
||
foreach my $gap_size (@gap_sizes) {
|
||
my @gap_fill = $self->_fill_gaps(@$gap_size, \@gaps);
|
||
$self->gap_fill->append($_) for @gap_fill;
|
||
|
||
# Make sure we don't infill narrow parts that are already gap-filled
|
||
# (we only consider this surface's gaps to reduce the diff() complexity).
|
||
# Growing actual extrusions ensures that gaps not filled by medial axis
|
||
# are not subtracted from fill surfaces (they might be too short gaps
|
||
# that medial axis skips but infill might join with other infill regions
|
||
# and use zigzag).
|
||
my $w = $gap_size->[2];
|
||
my @filled = map {
|
||
@{($_->isa('Slic3r::ExtrusionLoop') ? $_->polygon->split_at_first_point : $_->polyline)
|
||
->grow(scale $w/2)};
|
||
} @gap_fill;
|
||
@last = @{diff(\@last, \@filled)};
|
||
}
|
||
}
|
||
|
||
# create one more offset to be used as boundary for fill
|
||
# we offset by half the perimeter spacing (to get to the actual infill boundary)
|
||
# and then we offset back and forth by half the infill spacing to only consider the
|
||
# non-collapsing regions
|
||
my $min_perimeter_infill_spacing = $ispacing * (1 - &Slic3r::INSET_OVERLAP_TOLERANCE);
|
||
$self->fill_surfaces->append($_)
|
||
for map Slic3r::Surface->new(expolygon => $_, surface_type => S_TYPE_INTERNAL), # use a bogus surface type
|
||
@{offset2_ex(
|
||
[ map @{$_->simplify_p(&Slic3r::SCALED_RESOLUTION)}, @{union_ex(\@last)} ],
|
||
-($pspacing/2 + $min_perimeter_infill_spacing/2),
|
||
+$min_perimeter_infill_spacing/2,
|
||
)};
|
||
|
||
|
||
# process thin walls by collapsing slices to single passes
|
||
if (@thin_walls) {
|
||
# the following offset2 ensures almost nothing in @thin_walls is narrower than $min_width
|
||
# (actually, something larger than that still may exist due to mitering or other causes)
|
||
my $min_width = $pwidth / 4;
|
||
@thin_walls = @{offset2_ex([ map @$_, @thin_walls ], -$min_width/2, +$min_width/2)};
|
||
|
||
# the maximum thickness of our thin wall area is equal to the minimum thickness of a single loop
|
||
$self->_thin_wall_polylines([ map @{$_->medial_axis($pwidth + $pspacing, $min_width)}, @thin_walls ]);
|
||
Slic3r::debugf " %d thin walls detected\n", scalar(@{$self->_thin_wall_polylines}) if $Slic3r::debug;
|
||
|
||
if (0) {
|
||
require "Slic3r/SVG.pm";
|
||
Slic3r::SVG::output(
|
||
"medial_axis.svg",
|
||
no_arrows => 1,
|
||
expolygons => \@thin_walls,
|
||
green_polylines => [ map $_->polygon->split_at_first_point, @{$self->perimeters} ],
|
||
red_polylines => $self->_thin_wall_polylines,
|
||
);
|
||
}
|
||
}
|
||
|
||
# find nesting hierarchies separately for contours and holes
|
||
my $contours_pt = union_pt(\@contours);
|
||
$self->_holes_pt(union_pt(\@holes));
|
||
|
||
# order loops from inner to outer (in terms of object slices)
|
||
my @loops = $self->_traverse_pt($contours_pt, 0, 1);
|
||
|
||
# if brim will be printed, reverse the order of perimeters so that
|
||
# we continue inwards after having finished the brim
|
||
# TODO: add test for perimeter order
|
||
@loops = reverse @loops
|
||
if $self->config->external_perimeters_first
|
||
|| ($self->layer_id == 0 && $self->print_config->brim_width > 0);
|
||
|
||
# append perimeters for this slice as a collection
|
||
$self->loops->append(Slic3r::ExtrusionPath::Collection->new(@loops));
|
||
}
|
||
}
|
||
|
||
sub _traverse_pt {
|
||
my ($self, $polynodes, $depth, $is_contour) = @_;
|
||
|
||
# convert all polynodes to ExtrusionLoop objects
|
||
my $collection = Slic3r::ExtrusionPath::Collection->new; # temporary collection
|
||
my @children = ();
|
||
foreach my $polynode (@$polynodes) {
|
||
my $polygon = ($polynode->{outer} // $polynode->{hole})->clone;
|
||
|
||
my $role = EXTR_ROLE_PERIMETER;
|
||
my $loop_role = EXTRL_ROLE_DEFAULT;
|
||
|
||
my $root_level = $depth == 0;
|
||
my $no_children = !@{ $polynode->{children} };
|
||
my $is_external = $is_contour ? $root_level : $no_children;
|
||
my $is_internal = $is_contour ? $no_children : $root_level;
|
||
if ($is_contour && $is_internal) {
|
||
# internal perimeters are root level in case of holes
|
||
# and items with no children in case of contours
|
||
# Note that we set loop role to ContourInternalPerimeter
|
||
# also when loop is both internal and external (i.e.
|
||
# there's only one contour loop).
|
||
$loop_role = EXTRL_ROLE_CONTOUR_INTERNAL_PERIMETER;
|
||
}
|
||
if ($is_external) {
|
||
# external perimeters are root level in case of contours
|
||
# and items with no children in case of holes
|
||
$role = EXTR_ROLE_EXTERNAL_PERIMETER;
|
||
}
|
||
|
||
# detect overhanging/bridging perimeters
|
||
my @paths = ();
|
||
if ($self->config->overhangs && $self->layer_id > 0) {
|
||
# get non-overhang paths by intersecting this loop with the grown lower slices
|
||
foreach my $polyline (@{ intersection_ppl([ $polygon ], $self->_lower_slices_p) }) {
|
||
push @paths, Slic3r::ExtrusionPath->new(
|
||
polyline => $polyline,
|
||
role => $role,
|
||
mm3_per_mm => ($is_external ? $self->_ext_mm3_per_mm : $self->_mm3_per_mm),
|
||
width => ($is_external ? $self->ext_perimeter_flow->width : $self->perimeter_flow->width),
|
||
height => $self->layer_height,
|
||
);
|
||
}
|
||
|
||
# get overhang paths by checking what parts of this loop fall
|
||
# outside the grown lower slices (thus where the distance between
|
||
# the loop centerline and original lower slices is >= half nozzle diameter
|
||
foreach my $polyline (@{ diff_ppl([ $polygon ], $self->_lower_slices_p) }) {
|
||
push @paths, Slic3r::ExtrusionPath->new(
|
||
polyline => $polyline,
|
||
role => EXTR_ROLE_OVERHANG_PERIMETER,
|
||
mm3_per_mm => $self->_mm3_per_mm_overhang,
|
||
width => $self->overhang_flow->width,
|
||
height => $self->layer_height,
|
||
);
|
||
}
|
||
|
||
# reapply the nearest point search for starting point
|
||
# (clone because the collection gets DESTROY'ed)
|
||
# We allow polyline reversal because Clipper may have randomly
|
||
# reversed polylines during clipping.
|
||
my $collection = Slic3r::ExtrusionPath::Collection->new(@paths); # temporary collection
|
||
@paths = map $_->clone, @{$collection->chained_path(0)};
|
||
} else {
|
||
push @paths, Slic3r::ExtrusionPath->new(
|
||
polyline => $polygon->split_at_first_point,
|
||
role => $role,
|
||
mm3_per_mm => $self->_mm3_per_mm,
|
||
width => $self->perimeter_flow->width,
|
||
height => $self->layer_height,
|
||
);
|
||
}
|
||
my $loop = Slic3r::ExtrusionLoop->new_from_paths(@paths);
|
||
$loop->role($loop_role);
|
||
|
||
# return ccw contours and cw holes
|
||
# GCode.pm will convert all of them to ccw, but it needs to know
|
||
# what the holes are in order to compute the correct inwards move
|
||
# We do this on the final Loop object because overhang clipping
|
||
# does not keep orientation.
|
||
if ($is_contour) {
|
||
$loop->make_counter_clockwise;
|
||
} else {
|
||
$loop->make_clockwise;
|
||
}
|
||
$collection->append($loop);
|
||
|
||
# save the children
|
||
push @children, $polynode->{children};
|
||
}
|
||
|
||
# if we're handling the top-level contours, add thin walls as candidates too
|
||
# in order to include them in the nearest-neighbor search
|
||
if ($is_contour && $depth == 0) {
|
||
foreach my $polyline (@{$self->_thin_wall_polylines}) {
|
||
$collection->append(Slic3r::ExtrusionPath->new(
|
||
polyline => $polyline,
|
||
role => EXTR_ROLE_EXTERNAL_PERIMETER,
|
||
mm3_per_mm => $self->_mm3_per_mm,
|
||
width => $self->perimeter_flow->width,
|
||
height => $self->layer_height,
|
||
));
|
||
}
|
||
}
|
||
|
||
# use a nearest neighbor search to order these children
|
||
# TODO: supply second argument to chained_path() too?
|
||
# (We used to skip this chained_path() when $is_contour &&
|
||
# $depth == 0 because slices are ordered at G_code export
|
||
# time, but multiple top-level perimeters might belong to
|
||
# the same slice actually, so that was a broken optimization.)
|
||
# We supply no_reverse = false because we want to permit reversal
|
||
# of thin walls, but we rely on the fact that loops will never
|
||
# be reversed anyway.
|
||
my $sorted_collection = $collection->chained_path_indices(0);
|
||
my @orig_indices = @{$sorted_collection->orig_indices};
|
||
|
||
my @loops = ();
|
||
foreach my $loop (@$sorted_collection) {
|
||
my $orig_index = shift @orig_indices;
|
||
|
||
if ($loop->isa('Slic3r::ExtrusionPath')) {
|
||
push @loops, $loop->clone;
|
||
} else {
|
||
# if this is an external contour find all holes belonging to this contour(s)
|
||
# and prepend them
|
||
if ($is_contour && $depth == 0) {
|
||
# $loop is the outermost loop of an island
|
||
my @holes = ();
|
||
for (my $i = 0; $i <= $#{$self->_holes_pt}; $i++) {
|
||
if ($loop->polygon->contains_point($self->_holes_pt->[$i]{outer}->first_point)) {
|
||
push @holes, splice @{$self->_holes_pt}, $i, 1; # remove from candidates to reduce complexity
|
||
$i--;
|
||
}
|
||
}
|
||
|
||
# order holes efficiently
|
||
@holes = @holes[@{chained_path([ map {($_->{outer} // $_->{hole})->first_point} @holes ])}];
|
||
|
||
push @loops, reverse map $self->_traverse_pt([$_], 0, 0), @holes;
|
||
}
|
||
|
||
# traverse children and prepend them to this loop
|
||
push @loops, $self->_traverse_pt($children[$orig_index], $depth+1, $is_contour);
|
||
push @loops, $loop->clone;
|
||
}
|
||
}
|
||
return @loops;
|
||
}
|
||
|
||
sub _fill_gaps {
|
||
my ($self, $min, $max, $w, $gaps) = @_;
|
||
|
||
my $this = diff_ex(
|
||
offset2([ map @$_, @$gaps ], -$min/2, +$min/2),
|
||
offset2([ map @$_, @$gaps ], -$max/2, +$max/2),
|
||
1,
|
||
);
|
||
my @polylines = map @{$_->medial_axis($max, $min/2)}, @$this;
|
||
return if !@polylines;
|
||
|
||
Slic3r::debugf " %d gaps filled with extrusion width = %s\n", scalar @$this, $w
|
||
if @$this;
|
||
|
||
#my $flow = $layerm->flow(FLOW_ROLE_SOLID_INFILL, 0, $w);
|
||
my $flow = Slic3r::Flow->new(
|
||
width => $w,
|
||
height => $self->layer_height,
|
||
nozzle_diameter => $self->solid_infill_flow->nozzle_diameter,
|
||
);
|
||
|
||
my %path_args = (
|
||
role => EXTR_ROLE_GAPFILL,
|
||
mm3_per_mm => $flow->mm3_per_mm,
|
||
width => $flow->width,
|
||
height => $self->layer_height,
|
||
);
|
||
|
||
my @entities = ();
|
||
foreach my $polyline (@polylines) {
|
||
#if ($polylines[$i]->isa('Slic3r::Polygon')) {
|
||
# my $loop = Slic3r::ExtrusionLoop->new;
|
||
# $loop->append(Slic3r::ExtrusionPath->new(polyline => $polylines[$i]->split_at_first_point, %path_args));
|
||
# $polylines[$i] = $loop;
|
||
if ($polyline->is_valid && $polyline->first_point->coincides_with($polyline->last_point)) {
|
||
# since medial_axis() now returns only Polyline objects, detect loops here
|
||
push @entities, my $loop = Slic3r::ExtrusionLoop->new;
|
||
$loop->append(Slic3r::ExtrusionPath->new(polyline => $polyline, %path_args));
|
||
} else {
|
||
push @entities, Slic3r::ExtrusionPath->new(polyline => $polyline, %path_args);
|
||
}
|
||
}
|
||
|
||
return @entities;
|
||
}
|
||
|
||
1;
|