42fada4576
Fixed the update downloader to ignore downloaded preset index if it is older than the currently active one.
1600 lines
65 KiB
INI
1600 lines
65 KiB
INI
# Print profiles for the Prusa Research printers.
|
|
|
|
[vendor]
|
|
# Vendor name will be shown by the Config Wizard.
|
|
name = Prusa Research
|
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
|
# This means, the server may force the Slic3r configuration to be downgraded.
|
|
config_version = 0.4.0-alpha3
|
|
# Where to get the updates from?
|
|
config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
|
|
|
|
# The printer models will be shown by the Configuration Wizard in this order,
|
|
# also the first model installed & the first nozzle installed will be activated after install.
|
|
#TODO: One day we may differentiate variants of the nozzles / hot ends,
|
|
#for example by the melt zone size, or whether the nozzle is hardened.
|
|
# Printer model name will be shown by the installation wizard.
|
|
|
|
[printer_model:MK3]
|
|
name = Original Prusa i3 MK3
|
|
variants = 0.4; 0.25; 0.6
|
|
|
|
[printer_model:MK2.5]
|
|
name = Original Prusa i3 MK2.5
|
|
variants = 0.4; 0.25; 0.6
|
|
|
|
[printer_model:MK2S]
|
|
name = Original Prusa i3 MK2/S
|
|
variants = 0.4; 0.25; 0.6
|
|
|
|
[printer_model:MK3MMU2]
|
|
name = Original Prusa i3 MK3 MMU 2.0
|
|
variants = 0.4
|
|
|
|
[printer_model:MK2SMM]
|
|
name = Original Prusa i3 MK2/S MMU 1.0
|
|
variants = 0.4; 0.6
|
|
|
|
[printer_model:MK2.5MMU2]
|
|
name = Original Prusa i3 MK2.5 MMU 2.0
|
|
variants = 0.4
|
|
|
|
[printer_model:SL1]
|
|
name = Original Prusa SL1
|
|
variants = default
|
|
|
|
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
|
# not make it into the user interface.
|
|
|
|
# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
|
|
# All other print presets will derive from the *common* print preset.
|
|
[print:*common*]
|
|
avoid_crossing_perimeters = 0
|
|
bridge_acceleration = 1000
|
|
bridge_angle = 0
|
|
bridge_flow_ratio = 0.8
|
|
bridge_speed = 20
|
|
brim_width = 0
|
|
clip_multipart_objects = 1
|
|
compatible_printers =
|
|
complete_objects = 0
|
|
default_acceleration = 1000
|
|
dont_support_bridges = 1
|
|
elefant_foot_compensation = 0
|
|
ensure_vertical_shell_thickness = 1
|
|
external_fill_pattern = rectilinear
|
|
external_perimeters_first = 0
|
|
external_perimeter_extrusion_width = 0.45
|
|
extra_perimeters = 0
|
|
extruder_clearance_height = 20
|
|
extruder_clearance_radius = 20
|
|
extrusion_width = 0.45
|
|
fill_angle = 45
|
|
fill_density = 20%
|
|
fill_pattern = cubic
|
|
first_layer_acceleration = 1000
|
|
first_layer_extrusion_width = 0.42
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 20
|
|
gap_fill_speed = 40
|
|
gcode_comments = 0
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.45
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 25%
|
|
interface_shells = 0
|
|
max_print_speed = 100
|
|
max_volumetric_extrusion_rate_slope_negative = 0
|
|
max_volumetric_extrusion_rate_slope_positive = 0
|
|
max_volumetric_speed = 0
|
|
min_skirt_length = 4
|
|
notes =
|
|
overhangs = 0
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode
|
|
perimeters = 2
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.45
|
|
post_process =
|
|
print_settings_id =
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = nearest
|
|
single_extruder_multi_material_priming = 1
|
|
skirts = 1
|
|
skirt_distance = 2
|
|
skirt_height = 3
|
|
small_perimeter_speed = 25
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.45
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.35
|
|
support_material_interface_extruder = 0
|
|
support_material_angle = 0
|
|
support_material_buildplate_only = 0
|
|
support_material_enforce_layers = 0
|
|
support_material_contact_distance = 0.1
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_spacing = 2
|
|
support_material_speed = 50
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 55
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 50%
|
|
thin_walls = 0
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 40
|
|
travel_speed = 180
|
|
wipe_tower = 1
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
xy_size_compensation = 0
|
|
|
|
[print:*MK3*]
|
|
fill_pattern = grid
|
|
single_extruder_multi_material_priming = 0
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 125
|
|
|
|
# Print parameters common to a 0.25mm diameter nozzle.
|
|
[print:*0.25nozzle*]
|
|
external_perimeter_extrusion_width = 0.25
|
|
extrusion_width = 0.25
|
|
first_layer_extrusion_width = 0.25
|
|
infill_extrusion_width = 0.25
|
|
perimeter_extrusion_width = 0.25
|
|
solid_infill_extrusion_width = 0.25
|
|
top_infill_extrusion_width = 0.25
|
|
support_material_extrusion_width = 0.2
|
|
support_material_interface_layers = 0
|
|
support_material_interface_spacing = 0.15
|
|
support_material_spacing = 1
|
|
support_material_xy_spacing = 150%
|
|
|
|
# Print parameters common to a 0.6mm diameter nozzle.
|
|
[print:*0.6nozzle*]
|
|
external_perimeter_extrusion_width = 0.61
|
|
extrusion_width = 0.67
|
|
first_layer_extrusion_width = 0.65
|
|
infill_extrusion_width = 0.7
|
|
perimeter_extrusion_width = 0.65
|
|
solid_infill_extrusion_width = 0.65
|
|
top_infill_extrusion_width = 0.6
|
|
support_material_extrusion_width = 0.55
|
|
|
|
[print:*soluble_support*]
|
|
overhangs = 1
|
|
skirts = 0
|
|
support_material = 1
|
|
support_material_contact_distance = 0
|
|
support_material_extruder = 4
|
|
support_material_extrusion_width = 0.45
|
|
support_material_interface_extruder = 4
|
|
support_material_interface_spacing = 0.1
|
|
support_material_synchronize_layers = 1
|
|
support_material_threshold = 80
|
|
support_material_with_sheath = 1
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.05mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.05mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 10
|
|
bridge_acceleration = 300
|
|
bridge_flow_ratio = 0.7
|
|
default_acceleration = 500
|
|
external_perimeter_speed = 20
|
|
fill_density = 20%
|
|
first_layer_acceleration = 500
|
|
gap_fill_speed = 20
|
|
infill_acceleration = 800
|
|
infill_speed = 30
|
|
max_print_speed = 80
|
|
small_perimeter_speed = 20
|
|
solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.3
|
|
support_material_spacing = 1.5
|
|
layer_height = 0.05
|
|
perimeter_acceleration = 300
|
|
perimeter_speed = 30
|
|
perimeters = 3
|
|
support_material_speed = 30
|
|
top_solid_infill_speed = 20
|
|
top_solid_layers = 15
|
|
|
|
[print:0.05mm ULTRADETAIL]
|
|
inherits = *0.05mm*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
|
infill_extrusion_width = 0.5
|
|
|
|
[print:0.05mm ULTRADETAIL MK3]
|
|
inherits = *0.05mm*; *MK3*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
|
top_infill_extrusion_width = 0.4
|
|
|
|
[print:0.05mm ULTRADETAIL 0.25 nozzle]
|
|
inherits = *0.05mm*; *0.25nozzle*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
|
fill_density = 20%
|
|
infill_speed = 20
|
|
max_print_speed = 100
|
|
perimeter_speed = 20
|
|
small_perimeter_speed = 15
|
|
solid_infill_speed = 20
|
|
support_material_speed = 20
|
|
|
|
[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
|
|
inherits = *0.05mm*; *0.25nozzle*; *MK3*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.10mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.10mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 7
|
|
bridge_flow_ratio = 0.7
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
|
layer_height = 0.1
|
|
perimeter_acceleration = 800
|
|
top_solid_layers = 9
|
|
|
|
[print:0.10mm DETAIL]
|
|
inherits = *0.10mm*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
|
external_perimeter_speed = 40
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
perimeter_speed = 50
|
|
solid_infill_speed = 50
|
|
|
|
[print:0.10mm DETAIL MK3]
|
|
inherits = *0.10mm*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_infill_speed = 50
|
|
|
|
[print:0.10mm DETAIL 0.25 nozzle]
|
|
inherits = *0.10mm*; *0.25nozzle*
|
|
bridge_acceleration = 600
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
|
|
external_perimeter_speed = 20
|
|
infill_acceleration = 1600
|
|
infill_speed = 40
|
|
perimeter_acceleration = 600
|
|
perimeter_speed = 25
|
|
small_perimeter_speed = 15
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
|
|
[print:0.10mm DETAIL 0.25 nozzle MK3]
|
|
inherits = *0.10mm*; *0.25nozzle*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
[print:0.10mm DETAIL 0.6 nozzle MK3]
|
|
inherits = *0.10mm*; *0.6nozzle*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.15mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.15mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 5
|
|
external_perimeter_speed = 40
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
layer_height = 0.15
|
|
perimeter_acceleration = 800
|
|
perimeter_speed = 50
|
|
solid_infill_speed = 50
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_layers = 7
|
|
|
|
[print:0.15mm 100mms Linear Advance]
|
|
inherits = *0.15mm*
|
|
bridge_flow_ratio = 0.95
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 50
|
|
infill_speed = 100
|
|
max_print_speed = 150
|
|
perimeter_speed = 60
|
|
small_perimeter_speed = 30
|
|
solid_infill_speed = 100
|
|
support_material_speed = 60
|
|
top_solid_infill_speed = 70
|
|
|
|
[print:0.15mm OPTIMAL]
|
|
inherits = *0.15mm*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
top_infill_extrusion_width = 0.45
|
|
|
|
[print:0.15mm OPTIMAL 0.25 nozzle]
|
|
inherits = *0.15mm*; *0.25nozzle*
|
|
bridge_acceleration = 600
|
|
bridge_flow_ratio = 0.7
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
|
|
external_perimeter_speed = 20
|
|
infill_acceleration = 1600
|
|
infill_speed = 40
|
|
perimeter_acceleration = 600
|
|
perimeter_speed = 25
|
|
small_perimeter_speed = 15
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
|
|
[print:0.15mm OPTIMAL 0.6 nozzle]
|
|
inherits = *0.15mm*; *0.6nozzle*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
|
|
|
[print:0.15mm OPTIMAL MK3]
|
|
inherits = *0.15mm*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
[print:0.15mm OPTIMAL MK3 SOLUBLE FULL]
|
|
inherits = 0.15mm OPTIMAL MK3; *soluble_support*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 30
|
|
|
|
[print:0.15mm OPTIMAL MK3 SOLUBLE INTERFACE]
|
|
inherits = 0.15mm OPTIMAL MK3 SOLUBLE FULL
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
|
|
[print:0.15mm OPTIMAL SOLUBLE FULL]
|
|
inherits = *0.15mm*; *soluble_support*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
external_perimeter_speed = 25
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 30
|
|
|
|
[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
|
|
inherits = 0.15mm OPTIMAL SOLUBLE FULL
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 80%
|
|
|
|
[print:0.15mm OPTIMAL 0.25 nozzle MK3]
|
|
inherits = *0.15mm*; *0.25nozzle*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
[print:*0.20mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 4
|
|
bridge_flow_ratio = 0.95
|
|
external_perimeter_speed = 40
|
|
infill_acceleration = 1250
|
|
infill_speed = 60
|
|
layer_height = 0.2
|
|
perimeter_acceleration = 800
|
|
perimeter_speed = 50
|
|
solid_infill_speed = 50
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_layers = 5
|
|
|
|
[print:0.15mm OPTIMAL 0.6 nozzle MK3]
|
|
inherits = *0.15mm*; *0.6nozzle*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.20mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:0.20mm 100mms Linear Advance]
|
|
inherits = *0.20mm*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 50
|
|
infill_speed = 100
|
|
max_print_speed = 150
|
|
perimeter_speed = 60
|
|
small_perimeter_speed = 30
|
|
solid_infill_speed = 100
|
|
support_material_speed = 60
|
|
top_solid_infill_speed = 70
|
|
|
|
[print:0.20mm FAST MK3]
|
|
inherits = *0.20mm*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
[print:0.20mm FAST MK3 SOLUBLE FULL]
|
|
inherits = 0.20mm FAST MK3; *soluble_support*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
support_material_extruder = 5
|
|
support_material_interface_extruder = 5
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 30
|
|
|
|
[print:0.20mm FAST MK3 SOLUBLE INTERFACE]
|
|
inherits = 0.20mm FAST MK3 SOLUBLE FULL
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
|
|
[print:0.20mm NORMAL]
|
|
inherits = *0.20mm*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.20mm NORMAL 0.6 nozzle]
|
|
inherits = *0.20mm*; *0.6nozzle*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
|
|
|
[print:0.20mm NORMAL SOLUBLE FULL]
|
|
inherits = *0.20mm*; *soluble_support*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
external_perimeter_speed = 30
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
|
perimeter_speed = 40
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
|
|
[print:0.20mm NORMAL SOLUBLE INTERFACE]
|
|
inherits = 0.20mm NORMAL SOLUBLE FULL
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 3
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 80%
|
|
|
|
[print:0.20mm FAST 0.6 nozzle MK3]
|
|
inherits = *0.20mm*; *0.6nozzle*; *MK3*
|
|
bridge_speed = 30
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
|
|
external_perimeter_speed = 35
|
|
infill_acceleration = 1250
|
|
infill_speed = 200
|
|
max_print_speed = 200
|
|
perimeter_speed = 45
|
|
solid_infill_speed = 200
|
|
top_solid_infill_speed = 50
|
|
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
# XXX--- 0.35mm ---XXX
|
|
# XXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:*0.35mm*]
|
|
inherits = *common*
|
|
bottom_solid_layers = 3
|
|
external_perimeter_extrusion_width = 0.6
|
|
external_perimeter_speed = 40
|
|
first_layer_extrusion_width = 0.75
|
|
infill_acceleration = 2000
|
|
infill_speed = 60
|
|
layer_height = 0.35
|
|
perimeter_acceleration = 800
|
|
perimeter_extrusion_width = 0.65
|
|
perimeter_speed = 50
|
|
solid_infill_extrusion_width = 0.65
|
|
solid_infill_speed = 60
|
|
top_solid_infill_speed = 50
|
|
top_solid_layers = 4
|
|
|
|
[print:0.35mm FAST]
|
|
inherits = *0.35mm*
|
|
bridge_flow_ratio = 0.95
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
|
|
first_layer_extrusion_width = 0.42
|
|
perimeter_extrusion_width = 0.43
|
|
solid_infill_extrusion_width = 0.7
|
|
top_infill_extrusion_width = 0.43
|
|
|
|
[print:0.35mm FAST 0.6 nozzle]
|
|
inherits = *0.35mm*; *0.6nozzle*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
|
|
|
|
[print:0.35mm FAST sol full 0.6 nozzle]
|
|
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
|
|
external_perimeter_extrusion_width = 0.6
|
|
external_perimeter_speed = 30
|
|
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
|
perimeter_speed = 40
|
|
support_material_interface_layers = 3
|
|
support_material_xy_spacing = 120%
|
|
top_infill_extrusion_width = 0.57
|
|
|
|
[print:0.35mm FAST sol int 0.6 nozzle]
|
|
inherits = 0.35mm FAST sol full 0.6 nozzle
|
|
support_material_extruder = 0
|
|
support_material_interface_layers = 2
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 150%
|
|
|
|
# XXXXXXXXXXXXXXXXXXXXXX
|
|
# XXX----- MK2.5 ----XXX
|
|
# XXXXXXXXXXXXXXXXXXXXXX
|
|
|
|
[print:0.15mm 100mms Linear Advance MK2.5]
|
|
inherits = 0.15mm 100mms Linear Advance
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
[print:0.15mm OPTIMAL MK2.5]
|
|
inherits = 0.15mm OPTIMAL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
[print:0.15mm OPTIMAL SOLUBLE FULL MK2.5]
|
|
inherits = 0.15mm OPTIMAL SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
|
|
[print:0.15mm OPTIMAL SOLUBLE INTERFACE MK2.5]
|
|
inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
|
|
[print:0.20mm 100mms Linear Advance MK2.5]
|
|
inherits = 0.20mm 100mms Linear Advance
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
[print:0.20mm NORMAL MK2.5]
|
|
inherits = 0.20mm NORMAL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
[print:0.20mm NORMAL SOLUBLE FULL MK2.5]
|
|
inherits = 0.20mm NORMAL SOLUBLE FULL
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
[print:0.20mm NORMAL SOLUBLE INTERFACE MK2.5]
|
|
inherits = 0.20mm NORMAL SOLUBLE INTERFACE
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
[print:0.35mm FAST MK2.5]
|
|
inherits = 0.35mm FAST
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
|
single_extruder_multi_material_priming = 0
|
|
|
|
# XXXXXXxxXXXXXXXXXXXXXX
|
|
# XXX--- filament ---XXX
|
|
# XXXXXXXXxxXXXXXXXXXXXX
|
|
|
|
[filament:*common*]
|
|
cooling = 1
|
|
compatible_printers =
|
|
# For now, all but selected filaments are disabled for the MMU 2.0
|
|
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
end_filament_gcode = "; Filament-specific end gcode"
|
|
extrusion_multiplier = 1
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_toolchange_delay = 0
|
|
filament_cooling_moves = 4
|
|
filament_cooling_initial_speed = 2.2
|
|
filament_cooling_final_speed = 3.4
|
|
filament_load_time = 0
|
|
filament_unload_time = 0
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_cost = 0
|
|
filament_density = 0
|
|
filament_diameter = 1.75
|
|
filament_notes = ""
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 20
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
|
|
[filament:*PLA*]
|
|
inherits = *common*
|
|
bed_temperature = 60
|
|
bridge_fan_speed = 100
|
|
disable_fan_first_layers = 1
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FF3232
|
|
filament_max_volumetric_speed = 15
|
|
filament_type = PLA
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
temperature = 210
|
|
|
|
[filament:*PET*]
|
|
inherits = *common*
|
|
bed_temperature = 90
|
|
bridge_fan_speed = 50
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 20
|
|
filament_colour = #FF8000
|
|
filament_max_volumetric_speed = 8
|
|
filament_type = PET
|
|
first_layer_bed_temperature = 85
|
|
first_layer_temperature = 230
|
|
max_fan_speed = 50
|
|
min_fan_speed = 30
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
|
|
temperature = 240
|
|
|
|
[filament:*ABS*]
|
|
inherits = *common*
|
|
bed_temperature = 110
|
|
bridge_fan_speed = 30
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 20
|
|
filament_colour = #3A80CA
|
|
filament_max_volumetric_speed = 11
|
|
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_type = ABS
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 255
|
|
max_fan_speed = 30
|
|
min_fan_speed = 20
|
|
temperature = 255
|
|
|
|
[filament:*FLEX*]
|
|
inherits = *common*
|
|
bed_temperature = 50
|
|
bridge_fan_speed = 100
|
|
# For now, all but selected filaments are disabled for the MMU 2.0
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
|
cooling = 0
|
|
disable_fan_first_layers = 1
|
|
extrusion_multiplier = 1.2
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 100
|
|
filament_colour = #00CA0A
|
|
filament_max_volumetric_speed = 1.5
|
|
filament_type = FLEX
|
|
first_layer_bed_temperature = 50
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 90
|
|
min_fan_speed = 70
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 240
|
|
|
|
[filament:ColorFabb Brass Bronze]
|
|
inherits = *PLA*
|
|
# For now, all but selected filaments are disabled for the MMU 2.0
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 80.65
|
|
filament_density = 4
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 10
|
|
|
|
[filament:ColorFabb HT]
|
|
inherits = *PET*
|
|
bed_temperature = 110
|
|
bridge_fan_speed = 30
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_cost = 58.66
|
|
filament_density = 1.18
|
|
first_layer_bed_temperature = 105
|
|
first_layer_temperature = 270
|
|
max_fan_speed = 20
|
|
min_fan_speed = 10
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb PLA-PHA]
|
|
inherits = *PLA*
|
|
filament_cost = 55.5
|
|
filament_density = 1.24
|
|
|
|
[filament:ColorFabb Woodfil]
|
|
inherits = *PLA*
|
|
# For now, all but selected filaments are disabled for the MMU 2.0
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 62.9
|
|
filament_density = 1.15
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 10
|
|
first_layer_temperature = 200
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 200
|
|
|
|
[filament:ColorFabb XT]
|
|
inherits = *PET*
|
|
filament_type = PET
|
|
filament_cost = 62.9
|
|
filament_density = 1.27
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
temperature = 270
|
|
|
|
[filament:ColorFabb XT-CF20]
|
|
inherits = *PET*
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 80.65
|
|
filament_density = 1.35
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 1
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 260
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
temperature = 260
|
|
|
|
[filament:ColorFabb nGen]
|
|
inherits = *PET*
|
|
filament_cost = 21.2
|
|
filament_density = 1.2
|
|
bridge_fan_speed = 40
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_type = NGEN
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 35
|
|
min_fan_speed = 20
|
|
|
|
[filament:ColorFabb nGen flex]
|
|
inherits = *FLEX*
|
|
filament_cost = 0
|
|
filament_density = 1
|
|
bed_temperature = 85
|
|
bridge_fan_speed = 40
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
extrusion_multiplier = 1
|
|
fan_below_layer_time = 10
|
|
filament_max_volumetric_speed = 5
|
|
first_layer_bed_temperature = 85
|
|
first_layer_temperature = 260
|
|
max_fan_speed = 35
|
|
min_fan_speed = 20
|
|
temperature = 260
|
|
|
|
[filament:E3D Edge]
|
|
inherits = *PET*
|
|
filament_cost = 56.9
|
|
filament_density = 1.26
|
|
filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
|
|
|
|
[filament:E3D PC-ABS]
|
|
inherits = *ABS*
|
|
filament_cost = 0
|
|
filament_density = 1.05
|
|
first_layer_temperature = 270
|
|
temperature = 270
|
|
|
|
[filament:Fillamentum ABS]
|
|
inherits = *ABS*
|
|
filament_cost = 32.4
|
|
filament_density = 1.04
|
|
first_layer_temperature = 240
|
|
temperature = 240
|
|
|
|
[filament:Fillamentum ASA]
|
|
inherits = *ABS*
|
|
filament_cost = 38.7
|
|
filament_density = 1.04
|
|
fan_always_on = 1
|
|
first_layer_temperature = 265
|
|
temperature = 265
|
|
|
|
[filament:Fillamentum CPE HG100 HM100]
|
|
inherits = *PET*
|
|
filament_cost = 54.1
|
|
filament_density = 1.25
|
|
filament_notes = "CPE HG100 , CPE HM100"
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 275
|
|
max_fan_speed = 50
|
|
min_fan_speed = 50
|
|
temperature = 275
|
|
|
|
[filament:Fillamentum Timberfil]
|
|
inherits = *PLA*
|
|
# For now, all but selected filaments are disabled for the MMU 2.0
|
|
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
|
extrusion_multiplier = 1.2
|
|
filament_cost = 68
|
|
filament_density = 1.15
|
|
filament_colour = #804040
|
|
filament_max_volumetric_speed = 10
|
|
first_layer_temperature = 190
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 190
|
|
|
|
[filament:Generic ABS]
|
|
inherits = *ABS*
|
|
filament_cost = 27.82
|
|
filament_density = 1.04
|
|
filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
|
|
|
|
[filament:Generic PET]
|
|
inherits = *PET*
|
|
filament_cost = 27.82
|
|
filament_density = 1.24
|
|
filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
|
|
|
|
[filament:Generic PLA]
|
|
inherits = *PLA*
|
|
filament_cost = 25.4
|
|
filament_density = 1.27
|
|
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
|
|
|
[filament:Polymaker PC-Max]
|
|
inherits = *ABS*
|
|
filament_cost = 77.3
|
|
filament_density = 1.20
|
|
bed_temperature = 115
|
|
filament_colour = #3A80CA
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 270
|
|
temperature = 270
|
|
|
|
[filament:Primavalue PVA]
|
|
inherits = *PLA*
|
|
filament_cost = 108
|
|
filament_density = 1.23
|
|
cooling = 0
|
|
fan_always_on = 0
|
|
filament_colour = #FFFFD7
|
|
filament_max_volumetric_speed = 10
|
|
filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
|
|
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_soluble = 1
|
|
filament_type = PVA
|
|
first_layer_temperature = 195
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 195
|
|
|
|
[filament:Prusa ABS]
|
|
inherits = *ABS*
|
|
filament_cost = 27.82
|
|
filament_density = 1.08
|
|
filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
|
|
|
|
[filament:*ABS MMU2*]
|
|
inherits = Prusa ABS
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
filament_cooling_final_speed = 50
|
|
filament_cooling_initial_speed = 10
|
|
filament_cooling_moves = 5
|
|
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
|
|
|
|
[filament:Generic ABS MMU2]
|
|
inherits = *ABS MMU2*
|
|
|
|
[filament:Prusa ABS MMU2]
|
|
inherits = *ABS MMU2*
|
|
|
|
[filament:Prusa HIPS]
|
|
inherits = *ABS*
|
|
filament_cost = 27.3
|
|
filament_density = 1.04
|
|
bridge_fan_speed = 50
|
|
cooling = 1
|
|
extrusion_multiplier = 0.9
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 10
|
|
filament_colour = #FFFFD7
|
|
filament_soluble = 1
|
|
filament_type = HIPS
|
|
first_layer_temperature = 220
|
|
max_fan_speed = 20
|
|
min_fan_speed = 20
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 220
|
|
|
|
[filament:Prusa PET]
|
|
inherits = *PET*
|
|
filament_cost = 27.82
|
|
filament_density = 1.27
|
|
filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
|
|
|
|
[filament:*PET MMU2*]
|
|
inherits = Prusa PET
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
temperature = 230
|
|
first_layer_temperature = 230
|
|
filament_cooling_final_speed = 1
|
|
filament_cooling_initial_speed = 2
|
|
filament_cooling_moves = 1
|
|
filament_load_time = 12
|
|
filament_loading_speed = 14
|
|
filament_notes = PET
|
|
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_unload_time = 11
|
|
filament_unloading_speed = 20
|
|
filament_unloading_speed_start = 120
|
|
|
|
[filament:Generic PET MMU2]
|
|
inherits = *PET MMU2*
|
|
|
|
[filament:Prusa PET MMU2]
|
|
inherits = *PET MMU2*
|
|
|
|
[filament:Prusa PLA]
|
|
inherits = *PLA*
|
|
filament_cost = 25.4
|
|
filament_density = 1.24
|
|
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
|
|
|
[filament:Prusament PLA]
|
|
inherits = *PLA*
|
|
temperature = 215
|
|
filament_cost = 24.99
|
|
filament_density = 1.24
|
|
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
|
|
|
|
[filament:*PLA MMU2*]
|
|
inherits = Prusa PLA
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
temperature = 205
|
|
filament_cooling_final_speed = 1
|
|
filament_cooling_initial_speed = 2
|
|
filament_cooling_moves = 1
|
|
filament_load_time = 12
|
|
filament_loading_speed = 14
|
|
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_unload_time = 11
|
|
filament_unloading_speed = 20
|
|
|
|
[filament:Generic PLA MMU2]
|
|
inherits = *PLA MMU2*
|
|
|
|
[filament:Prusa PLA MMU2]
|
|
inherits = *PLA MMU2*
|
|
|
|
[filament:Prusament PLA MMU2]
|
|
inherits = *PLA MMU2*
|
|
|
|
[filament:SemiFlex or Flexfill 98A]
|
|
inherits = *FLEX*
|
|
filament_cost = 82
|
|
filament_density = 1.22
|
|
|
|
[filament:Taulman Bridge]
|
|
inherits = *common*
|
|
filament_cost = 40
|
|
filament_density = 1.13
|
|
bed_temperature = 90
|
|
bridge_fan_speed = 40
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 20
|
|
filament_colour = #DEE0E6
|
|
filament_max_volumetric_speed = 10
|
|
filament_soluble = 0
|
|
filament_type = PET
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 5
|
|
min_fan_speed = 0
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 250
|
|
|
|
[filament:Taulman T-Glase]
|
|
inherits = *PET*
|
|
filament_cost = 40
|
|
filament_density = 1.27
|
|
bridge_fan_speed = 40
|
|
cooling = 0
|
|
fan_always_on = 0
|
|
first_layer_bed_temperature = 90
|
|
first_layer_temperature = 240
|
|
max_fan_speed = 5
|
|
min_fan_speed = 0
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
|
|
|
[filament:Verbatim BVOH]
|
|
inherits = *common*
|
|
filament_cost = 218
|
|
filament_density = 1.23
|
|
bed_temperature = 60
|
|
bridge_fan_speed = 100
|
|
cooling = 0
|
|
disable_fan_first_layers = 1
|
|
extrusion_multiplier = 1
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FFFFD7
|
|
filament_max_volumetric_speed = 4
|
|
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
|
filament_soluble = 1
|
|
filament_type = PLA
|
|
first_layer_bed_temperature = 60
|
|
first_layer_temperature = 215
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 210
|
|
|
|
[filament:Verbatim BVOH MMU2]
|
|
inherits = Verbatim BVOH
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
|
temperature = 195
|
|
filament_notes = BVOH
|
|
fan_always_on = 1
|
|
first_layer_temperature = 200
|
|
filament_cooling_final_speed = 1
|
|
filament_cooling_initial_speed = 2
|
|
filament_max_volumetric_speed = 4
|
|
filament_type = PVA
|
|
filament_cooling_moves = 1
|
|
filament_load_time = 12
|
|
filament_loading_speed = 14
|
|
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_unload_time = 11
|
|
filament_unloading_speed = 20
|
|
filament_unloading_speed_start = 100
|
|
|
|
[filament:Verbatim PP]
|
|
inherits = *common*
|
|
filament_cost = 72
|
|
filament_density = 0.89
|
|
bed_temperature = 100
|
|
bridge_fan_speed = 100
|
|
cooling = 1
|
|
disable_fan_first_layers = 2
|
|
extrusion_multiplier = 1
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 100
|
|
filament_colour = #DEE0E6
|
|
filament_max_volumetric_speed = 5
|
|
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
|
|
filament_type = PLA
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 220
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
|
temperature = 220
|
|
|
|
[sla_print:*common*]
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
|
|
layer_height = 0.05
|
|
output_filename_format = [input_filename_base].dwz
|
|
pad_edge_radius = 0.5
|
|
pad_enable = 1
|
|
pad_max_merge_distance = 50
|
|
pad_wall_height = 3
|
|
pad_wall_thickness = 1
|
|
support_base_diameter = 3
|
|
support_base_height = 0.5
|
|
support_critical_angle = 45
|
|
support_density_at_45 = 250
|
|
support_density_at_horizontal = 500
|
|
support_head_front_diameter = 0.4
|
|
support_head_penetration = 0.4
|
|
support_head_width = 3
|
|
support_max_bridge_length = 10
|
|
support_minimal_z = 0
|
|
support_object_elevation = 5
|
|
support_pillar_diameter = 1
|
|
support_pillar_widening_factor = 0
|
|
supports_enable = 1
|
|
|
|
[sla_print:0.025 UltraDetail]
|
|
inherits = *common*
|
|
layer_height = 0.025
|
|
support_head_width = 2
|
|
|
|
[sla_print:0.035 Detail]
|
|
inherits = *common*
|
|
layer_height = 0.035
|
|
|
|
[sla_print:0.05 Normal]
|
|
inherits = *common*
|
|
layer_height = 0.05
|
|
|
|
[sla_print:0.1 Fast]
|
|
inherits = *common*
|
|
layer_height = 0.1
|
|
|
|
########### Materials 0.025
|
|
|
|
[sla_material:*common 0.05*]
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
|
|
compatible_prints_condition = layer_height == 0.05
|
|
exposure_time = 12
|
|
initial_exposure_time = 45
|
|
initial_layer_height = 0.5
|
|
material_correction_curing = 1,1,1
|
|
material_correction_printing = 1,1,1
|
|
material_notes =
|
|
|
|
[sla_material:*common 0.025*]
|
|
inherits = *common 0.05*
|
|
compatible_prints_condition = layer_height == 0.025
|
|
exposure_time = 10
|
|
initial_exposure_time = 35
|
|
|
|
[sla_material:*common 0.035*]
|
|
inherits = *common 0.05*
|
|
compatible_prints_condition = layer_height == 0.035
|
|
exposure_time = 13
|
|
initial_exposure_time = 40
|
|
|
|
[sla_material:*common 0.1*]
|
|
inherits = *common 0.05*
|
|
compatible_prints_condition = layer_height == 0.1
|
|
exposure_time = 20
|
|
initial_exposure_time = 90
|
|
|
|
########### Materials 0.025
|
|
|
|
[sla_material:Jamg He Transparent Clear 0.025]
|
|
inherits = *common 0.025*
|
|
|
|
[sla_material:Jamg He Transparent Green 0.025]
|
|
inherits = *common 0.025*
|
|
|
|
[sla_material:Jamg He Transparent Orange 0.025]
|
|
inherits = *common 0.025*
|
|
|
|
[sla_material:Jamg He Transparent Red 0.025]
|
|
inherits = *common 0.025*
|
|
|
|
########### Materials 0.05
|
|
|
|
[sla_material:Jamg He Transparent Clear 0.05]
|
|
inherits = *common 0.05*
|
|
|
|
[sla_material:Jamg He Transparent Green 0.05]
|
|
inherits = *common 0.05*
|
|
|
|
[sla_material:Jamg He Transparent Orange 0.05]
|
|
inherits = *common 0.05*
|
|
|
|
[sla_material:Jamg He Transparent Red 0.05]
|
|
inherits = *common 0.05*
|
|
|
|
########### Materials 0.035
|
|
|
|
[sla_material:Jamg He Transparent Clear 0.035]
|
|
inherits = *common 0.035*
|
|
|
|
[sla_material:Jamg He Transparent Green 0.035]
|
|
inherits = *common 0.035*
|
|
|
|
[sla_material:Jamg He Transparent Orange 0.035]
|
|
inherits = *common 0.035*
|
|
|
|
[sla_material:Jamg He Transparent Red 0.035]
|
|
inherits = *common 0.035*
|
|
|
|
########### Materials 0.1
|
|
|
|
[sla_material:Jamg He Transparent Clear 0.1]
|
|
inherits = *common 0.1*
|
|
|
|
[sla_material:Jamg He Transparent Green 0.1]
|
|
inherits = *common 0.1*
|
|
|
|
[sla_material:Jamg He Transparent Orange 0.1]
|
|
inherits = *common 0.1*
|
|
|
|
[sla_material:Jamg He Transparent Red 0.1]
|
|
inherits = *common 0.1*
|
|
|
|
[printer:*common*]
|
|
printer_technology = FFF
|
|
bed_shape = 0x0,250x0,250x210,0x210
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
|
between_objects_gcode =
|
|
deretract_speed = 0
|
|
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
|
extruder_colour = #FFFF00
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
silent_mode = 0
|
|
remaining_times = 0
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
max_layer_height = 0.25
|
|
min_layer_height = 0.07
|
|
max_print_height = 200
|
|
nozzle_diameter = 0.4
|
|
octoprint_apikey =
|
|
octoprint_host =
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
|
|
printer_settings_id =
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 0.8
|
|
retract_length_toolchange = 4
|
|
retract_lift = 0.6
|
|
retract_lift_above = 0
|
|
retract_lift_below = 199
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 35
|
|
serial_port =
|
|
serial_speed = 250000
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|
|
printer_model = MK2S
|
|
printer_variant = 0.4
|
|
default_print_profile = 0.15mm OPTIMAL
|
|
default_filament_profile = Prusament PLA
|
|
|
|
[printer:*multimaterial*]
|
|
inherits = *common*
|
|
deretract_speed = 50
|
|
retract_before_travel = 3
|
|
retract_before_wipe = 60%
|
|
retract_layer_change = 0
|
|
retract_length = 4
|
|
retract_lift = 0.6
|
|
retract_lift_above = 0
|
|
retract_lift_below = 199
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 80
|
|
parking_pos_retraction = 92
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
single_extruder_multi_material = 1
|
|
printer_model = MK2SMM
|
|
|
|
[printer:*mm-single*]
|
|
inherits = *multimaterial*
|
|
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
|
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
|
|
default_print_profile = 0.15mm OPTIMAL
|
|
|
|
[printer:*mm-multi*]
|
|
inherits = *multimaterial*
|
|
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors
|
|
extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
|
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
|
|
variable_layer_height = 0
|
|
default_print_profile = 0.15mm OPTIMAL
|
|
|
|
# XXXXXXXXXXXXXXXXX
|
|
# XXX--- MK2 ---XXX
|
|
# XXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK2]
|
|
inherits = *common*
|
|
|
|
[printer:Original Prusa i3 MK2 0.25 nozzle]
|
|
inherits = *common*
|
|
max_layer_height = 0.1
|
|
min_layer_height = 0.05
|
|
nozzle_diameter = 0.25
|
|
retract_length = 1
|
|
retract_speed = 50
|
|
variable_layer_height = 0
|
|
printer_variant = 0.25
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle
|
|
|
|
[printer:Original Prusa i3 MK2 0.6 nozzle]
|
|
inherits = *common*
|
|
max_layer_height = 0.35
|
|
min_layer_height = 0.1
|
|
nozzle_diameter = 0.6
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
# XXX--- MK2MM ---XXX
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK2 MM Single Mode]
|
|
inherits = *mm-single*
|
|
|
|
[printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle]
|
|
inherits = *mm-single*
|
|
nozzle_diameter = 0.6
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
|
|
[printer:Original Prusa i3 MK2 MultiMaterial]
|
|
inherits = *mm-multi*
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4
|
|
|
|
[printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle]
|
|
inherits = *mm-multi*
|
|
nozzle_diameter = 0.6,0.6,0.6,0.6
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
|
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
# XXX--- MK2.5 ---XXX
|
|
# XXXXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK2.5]
|
|
inherits = Original Prusa i3 MK2
|
|
printer_model = MK2.5
|
|
remaining_times = 1
|
|
start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5 MMU2 Single]
|
|
inherits = Original Prusa i3 MK2.5; *mm2*
|
|
printer_model = MK2.5MMU2
|
|
single_extruder_multi_material = 0
|
|
max_print_height = 200
|
|
remaining_times = 1
|
|
silent_mode = 0
|
|
retract_lift_below = 199
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
default_print_profile = 0.15mm OPTIMAL MK2.5
|
|
default_filament_profile = Prusament PLA
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
|
start_gcode = M107\nM115 U3.4.2 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT?\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
|
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
|
|
|
[printer:Original Prusa i3 MK2.5 MMU2]
|
|
inherits = Original Prusa i3 MK2.5; *mm2*
|
|
printer_model = MK2.5MMU2
|
|
max_print_height = 200
|
|
remaining_times = 1
|
|
silent_mode = 0
|
|
retract_lift_below = 199
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 10
|
|
machine_max_jerk_y = 10
|
|
machine_max_jerk_z = 0.2
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
default_print_profile = 0.15mm OPTIMAL MK2.5
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
|
|
single_extruder_multi_material = 1
|
|
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
|
|
# (for example the retract values) are duplicaed from the first value, so they do not need
|
|
# to be defined explicitely.
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
|
extruder_colour = #FF8000;#0080FF;#00FFFF;#FF4F4F;#9FFF9F
|
|
start_gcode = M107\nM115 U3.4.2 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
|
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
|
|
|
|
[printer:Original Prusa i3 MK2.5 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK2 0.25 nozzle
|
|
printer_model = MK2.5
|
|
remaining_times = 1
|
|
start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
[printer:Original Prusa i3 MK2.5 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK2 0.6 nozzle
|
|
printer_model = MK2.5
|
|
remaining_times = 1
|
|
start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
|
|
|
|
# XXXXXXXXXXXXXXXXX
|
|
# XXX--- MK3 ---XXX
|
|
# XXXXXXXXXXXXXXXXX
|
|
|
|
[printer:Original Prusa i3 MK3]
|
|
inherits = *common*
|
|
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
|
machine_max_acceleration_e = 5000,5000
|
|
machine_max_acceleration_extruding = 1250,1250
|
|
machine_max_acceleration_retracting = 1250,1250
|
|
machine_max_acceleration_x = 1000,960
|
|
machine_max_acceleration_y = 1000,960
|
|
machine_max_acceleration_z = 1000,1000
|
|
machine_max_feedrate_e = 120,120
|
|
machine_max_feedrate_x = 200,100
|
|
machine_max_feedrate_y = 200,100
|
|
machine_max_feedrate_z = 12,12
|
|
machine_max_jerk_e = 1.5,1.5
|
|
machine_max_jerk_x = 8,8
|
|
machine_max_jerk_y = 8,8
|
|
machine_max_jerk_z = 0.4,0.4
|
|
machine_min_extruding_rate = 0,0
|
|
machine_min_travel_rate = 0,0
|
|
silent_mode = 1
|
|
remaining_times = 1
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
|
retract_lift_below = 209
|
|
max_print_height = 210
|
|
start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
|
printer_model = MK3
|
|
default_print_profile = 0.15mm OPTIMAL MK3
|
|
|
|
[printer:Original Prusa i3 MK3 0.25 nozzle]
|
|
inherits = Original Prusa i3 MK3
|
|
nozzle_diameter = 0.25
|
|
max_layer_height = 0.1
|
|
min_layer_height = 0.05
|
|
printer_variant = 0.25
|
|
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
|
|
|
[printer:Original Prusa i3 MK3 0.6 nozzle]
|
|
inherits = Original Prusa i3 MK3
|
|
nozzle_diameter = 0.6
|
|
max_layer_height = 0.35
|
|
min_layer_height = 0.1
|
|
printer_variant = 0.6
|
|
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
|
|
|
[printer:*mm2*]
|
|
inherits = Original Prusa i3 MK3
|
|
single_extruder_multi_material = 1
|
|
cooling_tube_length = 10
|
|
cooling_tube_retraction = 30
|
|
parking_pos_retraction = 85
|
|
retract_length_toolchange = 3
|
|
extra_loading_move = -13
|
|
printer_model = MK3MMU2
|
|
default_print_profile = 0.15mm OPTIMAL MK3
|
|
default_filament_profile = Prusament PLA MMU2
|
|
|
|
[printer:Original Prusa i3 MK3 MMU2 Single]
|
|
inherits = *mm2*
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M107\nM115 U3.4.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT?\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
|
end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
|
|
|
[printer:Original Prusa i3 MK3 MMU2]
|
|
inherits = *mm2*
|
|
# The 5x nozzle diameter defines the number of extruders. Other extruder parameters
|
|
# (for example the retract values) are duplicaed from the first value, so they do not need
|
|
# to be defined explicitely.
|
|
machine_max_acceleration_e = 8000,8000
|
|
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
|
|
extruder_colour = #FF8000;#0080FF;#00FFFF;#FF4F4F;#9FFF9F
|
|
start_gcode = M107\nM115 U3.4.1 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
|
|
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
|
|
|
|
[printer:Original Prusa SL1]
|
|
printer_technology = SLA
|
|
printer_model = SL1
|
|
printer_variant = default
|
|
default_sla_material_profile = Jamg He Transparent Green 0.05
|
|
default_sla_print_profile = 0.05 Normal
|
|
bed_shape = 0.98x1.02,119.98x1.02,119.98x68.02,0.98x68.02
|
|
display_height = 68.04
|
|
display_orientation = portrait
|
|
display_pixels_x = 2560
|
|
display_pixels_y = 1440
|
|
display_width = 120.96
|
|
max_print_height = 150
|
|
printer_correction = 1,1,1
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n
|
|
|
|
# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
|
|
[obsolete_presets]
|
|
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
|
|
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|
|
printer="Original Prusa SL1 dummy"
|