90 lines
3.2 KiB
Perl
90 lines
3.2 KiB
Perl
use Test::More;
|
|
use strict;
|
|
use warnings;
|
|
|
|
plan tests => 8;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/../lib";
|
|
}
|
|
|
|
use Slic3r;
|
|
|
|
sub buffer {
|
|
my $config = shift || Slic3r::Config->new_from_defaults;
|
|
my $buffer = Slic3r::GCode::CoolingBuffer->new(
|
|
config => $config,
|
|
gcodegen => Slic3r::GCode->new(config => $config, layer_count => 10, extruders => []),
|
|
);
|
|
return $buffer;
|
|
}
|
|
|
|
my $config = Slic3r::Config->new_from_defaults;
|
|
$config->set('disable_fan_first_layers', 0);
|
|
|
|
{
|
|
my $buffer = buffer($config);
|
|
$buffer->gcodegen->elapsed_time($buffer->config->slowdown_below_layer_time + 1);
|
|
my $gcode = $buffer->append('G1 X100 E1 F3000', 0, 0, 0.4) . $buffer->flush;
|
|
like $gcode, qr/F3000/, 'speed is not altered when elapsed time is greater than slowdown threshold';
|
|
}
|
|
|
|
{
|
|
my $buffer = buffer($config);
|
|
$buffer->gcodegen->elapsed_time($buffer->config->slowdown_below_layer_time - 1);
|
|
my $gcode = $buffer->append("G1 X50 F2500\nG1 X100 E1 F3000\nG1 E4 F400", 0, 0, 0.4) . $buffer->flush;
|
|
unlike $gcode, qr/F3000/, 'speed is altered when elapsed time is lower than slowdown threshold';
|
|
like $gcode, qr/F2500/, 'speed is not altered for travel moves';
|
|
like $gcode, qr/F400/, 'speed is not altered for extruder-only moves';
|
|
}
|
|
|
|
{
|
|
my $buffer = buffer($config);
|
|
$buffer->gcodegen->elapsed_time($buffer->config->fan_below_layer_time + 1);
|
|
my $gcode = $buffer->append('G1 X100 E1 F3000', 0, 0, 0.4) . $buffer->flush;
|
|
unlike $gcode, qr/M106/, 'fan is not activated when elapsed time is greater than fan threshold';
|
|
}
|
|
|
|
{
|
|
my $buffer = buffer($config);
|
|
my $gcode = "";
|
|
for my $obj_id (0 .. 1) {
|
|
# use an elapsed time which is < the slowdown threshold but greater than it when summed twice
|
|
$buffer->gcodegen->elapsed_time($buffer->config->slowdown_below_layer_time - 1);
|
|
$gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, 0, 0.4);
|
|
}
|
|
$gcode .= $buffer->flush;
|
|
like $gcode, qr/F3000/, 'slowdown is computed on all objects printing at same Z';
|
|
}
|
|
|
|
{
|
|
my $buffer = buffer($config);
|
|
my $gcode = "";
|
|
for my $layer_id (0 .. 1) {
|
|
for my $obj_id (0 .. 1) {
|
|
# use an elapsed time which is < the threshold but greater than it when summed twice
|
|
$buffer->gcodegen->elapsed_time($buffer->config->fan_below_layer_time - 1);
|
|
$gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0.4 + 0.4*$layer_id + 0.1*$obj_id); # print same layer at distinct heights
|
|
}
|
|
}
|
|
$gcode .= $buffer->flush;
|
|
unlike $gcode, qr/M106/, 'fan activation is computed on all objects printing at different Z';
|
|
}
|
|
|
|
{
|
|
my $buffer = buffer($config);
|
|
my $gcode = "";
|
|
for my $layer_id (0 .. 1) {
|
|
for my $obj_id (0 .. 1) {
|
|
# use an elapsed time which is < the threshold even when summed twice
|
|
$buffer->gcodegen->elapsed_time($buffer->config->fan_below_layer_time/2 - 1);
|
|
$gcode .= $buffer->append("G1 X100 E1 F3000\n", $obj_id, $layer_id, 0.4 + 0.4*$layer_id + 0.1*$obj_id); # print same layer at distinct heights
|
|
}
|
|
}
|
|
$gcode .= $buffer->flush;
|
|
like $gcode, qr/M106/, 'fan activation is computed on all objects printing at different Z';
|
|
}
|
|
|
|
__END__
|