423 lines
12 KiB
INI
423 lines
12 KiB
INI
# Print profiles for the Creality printers.
|
|
|
|
[vendor]
|
|
# Vendor name will be shown by the Config Wizard.
|
|
name = Creality
|
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
|
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
|
config_version = 0.0.1
|
|
# Where to get the updates from?
|
|
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
|
|
# changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
|
|
|
# The printer models will be shown by the Configuration Wizard in this order,
|
|
# also the first model installed & the first nozzle installed will be activated after install.
|
|
# Printer model name will be shown by the installation wizard.
|
|
|
|
[printer_model:ENDER3]
|
|
name = Creality Ender-3
|
|
variants = 0.4
|
|
technology = FFF
|
|
|
|
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
|
# not make it into the user interface.
|
|
|
|
# Common print preset
|
|
[print:*common*]
|
|
avoid_crossing_perimeters = 0
|
|
bridge_angle = 0
|
|
bridge_flow_ratio = 0.95
|
|
bridge_speed = 25
|
|
brim_width = 0
|
|
clip_multipart_objects = 1
|
|
compatible_printers =
|
|
complete_objects = 0
|
|
dont_support_bridges = 1
|
|
elefant_foot_compensation = 0
|
|
ensure_vertical_shell_thickness = 1
|
|
external_fill_pattern = rectilinear
|
|
external_perimeters_first = 0
|
|
external_perimeter_extrusion_width = 0.45
|
|
extra_perimeters = 0
|
|
extruder_clearance_height = 25
|
|
extruder_clearance_radius = 45
|
|
extrusion_width = 0.45
|
|
fill_angle = 45
|
|
fill_density = 20%
|
|
fill_pattern = grid
|
|
first_layer_extrusion_width = 0.42
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 20
|
|
gap_fill_speed = 30
|
|
gcode_comments = 0
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.45
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 25%
|
|
interface_shells = 0
|
|
max_print_speed = 100
|
|
max_volumetric_extrusion_rate_slope_negative = 0
|
|
max_volumetric_extrusion_rate_slope_positive = 0
|
|
max_volumetric_speed = 0
|
|
min_skirt_length = 4
|
|
notes =
|
|
overhangs = 0
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
perimeters = 2
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.45
|
|
post_process =
|
|
print_settings_id =
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = nearest
|
|
single_extruder_multi_material_priming = 1
|
|
skirts = 1
|
|
skirt_distance = 2
|
|
skirt_height = 2
|
|
small_perimeter_speed = 25
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.45
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.4
|
|
support_material_interface_extruder = 0
|
|
support_material_angle = 0
|
|
support_material_buildplate_only = 0
|
|
support_material_enforce_layers = 0
|
|
support_material_contact_distance = 0.15
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_spacing = 2
|
|
support_material_speed = 40
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 45
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 60%
|
|
thin_walls = 0
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 40
|
|
travel_speed = 100
|
|
wipe_tower = 0
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
xy_size_compensation = 0
|
|
|
|
[print:*0.12mm*]
|
|
inherits = *common*
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 25
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
layer_height = 0.12
|
|
perimeters = 3
|
|
top_infill_extrusion_width = 0.4
|
|
bottom_solid_layers = 6
|
|
top_solid_layers = 7
|
|
|
|
[print:*0.20mm*]
|
|
inherits = *common*
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 25
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
layer_height = 0.20
|
|
top_infill_extrusion_width = 0.4
|
|
bottom_solid_layers = 4
|
|
top_solid_layers = 5
|
|
|
|
[print:*0.24mm*]
|
|
inherits = *common*
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 25
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
layer_height = 0.24
|
|
top_infill_extrusion_width = 0.45
|
|
bottom_solid_layers = 3
|
|
top_solid_layers = 4
|
|
|
|
[print:0.12mm DETAIL @ENDER3]
|
|
inherits = *0.12mm*
|
|
# alias = 0.12mm DETAIL
|
|
travel_speed = 150
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.38
|
|
compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.20mm NORMAL @ENDER3]
|
|
inherits = *0.20mm*
|
|
# alias = 0.20mm NORMAL
|
|
travel_speed = 150
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.38
|
|
compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.24mm DRAFT @ENDER3]
|
|
inherits = *0.24mm*
|
|
# alias = 0.24mm DRAFT
|
|
travel_speed = 150
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.38
|
|
compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
|
|
|
|
# Common filament preset
|
|
[filament:*common*]
|
|
cooling = 0
|
|
compatible_printers =
|
|
extrusion_multiplier = 1
|
|
filament_cost = 0
|
|
filament_density = 0
|
|
filament_diameter = 1.75
|
|
filament_notes = ""
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 20
|
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
|
|
|
|
[filament:*PLA*]
|
|
inherits = *common*
|
|
bed_temperature = 40
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FF3232
|
|
filament_max_volumetric_speed = 15
|
|
filament_type = PLA
|
|
filament_density = 1.24
|
|
filament_cost = 20
|
|
first_layer_bed_temperature = 40
|
|
first_layer_temperature = 215
|
|
fan_always_on = 1
|
|
cooling = 1
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
bridge_fan_speed = 100
|
|
disable_fan_first_layers = 1
|
|
temperature = 210
|
|
|
|
[filament:*PET*]
|
|
inherits = *common*
|
|
bed_temperature = 70
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
fan_below_layer_time = 20
|
|
filament_colour = #FF8000
|
|
filament_max_volumetric_speed = 8
|
|
filament_type = PETG
|
|
filament_density = 1.27
|
|
filament_cost = 30
|
|
first_layer_bed_temperature =70
|
|
first_layer_temperature = 240
|
|
fan_always_on = 1
|
|
max_fan_speed = 50
|
|
min_fan_speed = 20
|
|
bridge_fan_speed = 100
|
|
temperature = 240
|
|
|
|
[filament:*ABS*]
|
|
inherits = *common*
|
|
bed_temperature = 100
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
fan_below_layer_time = 20
|
|
filament_colour = #3A80CA
|
|
filament_max_volumetric_speed = 11
|
|
filament_type = ABS
|
|
filament_density = 1.04
|
|
filament_cost = 20
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 245
|
|
fan_always_on = 0
|
|
max_fan_speed = 0
|
|
min_fan_speed = 0
|
|
bridge_fan_speed = 30
|
|
top_fan_speed = 0
|
|
temperature = 245
|
|
|
|
[filament:Generic PLA @ENDER3]
|
|
inherits = *PLA*
|
|
# alias = Generic PLA
|
|
filament_vendor = Generic
|
|
|
|
[filament:Generic PET @ENDER3]
|
|
inherits = *PET*
|
|
# alias = Generic PET
|
|
filament_vendor = Generic
|
|
|
|
[filament:Generic ABS @ENDER3]
|
|
inherits = *ABS*
|
|
# alias = Generic ABS
|
|
first_layer_bed_temperature = 90
|
|
bed_temperature = 90
|
|
filament_vendor = Generic
|
|
|
|
[filament:Creality PLA @ENDER3]
|
|
inherits = *PLA*
|
|
# alias = Creality PLA
|
|
filament_vendor = Creality
|
|
temperature = 205
|
|
bed_temperature = 40
|
|
first_layer_temperature = 210
|
|
first_layer_bed_temperature =40
|
|
|
|
[filament:Creality PET @ENDER3]
|
|
inherits = *PET*
|
|
# alias = Creality PET
|
|
filament_vendor = Creality
|
|
temperature = 240
|
|
bed_temperature = 70
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature =70
|
|
max_fan_speed = 40
|
|
min_fan_speed = 20
|
|
|
|
[filament:Creality ABS @ENDER3]
|
|
inherits = *ABS*
|
|
# alias = Creality ABS
|
|
filament_vendor = Creality
|
|
temperature = 240
|
|
bed_temperature = 90
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature =90
|
|
|
|
[filament:Prusament PLA @ENDER3]
|
|
inherits = *PLA*
|
|
# alias = Prusament PLA
|
|
filament_vendor = Prusa Research
|
|
temperature = 215
|
|
bed_temperature = 40
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature =40
|
|
filament_cost = 24.99
|
|
filament_density = 1.24
|
|
|
|
[filament:Prusament PETG @ENDER3]
|
|
inherits = *PET*
|
|
# alias = Prusament PETG
|
|
filament_vendor = Prusa Research
|
|
temperature = 245
|
|
bed_temperature = 70
|
|
first_layer_temperature = 245
|
|
first_layer_bed_temperature =70
|
|
filament_cost = 24.99
|
|
filament_density = 1.27
|
|
|
|
# Common printer preset
|
|
[printer:*common*]
|
|
printer_technology = FFF
|
|
bed_shape = 0x0,200x0,200x200,0x200
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
|
between_objects_gcode =
|
|
deretract_speed = 0
|
|
extruder_colour = #FFFF00
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
silent_mode = 0
|
|
remaining_times = 0
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 3000
|
|
machine_max_acceleration_y = 3000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 20
|
|
machine_max_jerk_y = 20
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
max_layer_height = 0.3
|
|
min_layer_height = 0.07
|
|
max_print_height = 200
|
|
nozzle_diameter = 0.4
|
|
octoprint_apikey =
|
|
octoprint_host =
|
|
printer_notes =
|
|
printer_settings_id =
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 1
|
|
retract_length_toolchange = 1
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 35
|
|
serial_port =
|
|
serial_speed = 250000
|
|
single_extruder_multi_material = 0
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 Z0.15 F240\nG1 X60.0 E9.0 F800.0 ; intro line\nG1 X100.0 E12.5 F800 ; intro line\nG92 E0.0
|
|
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 F3000 ; home X axis\nM84 ; disable motors
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|
|
printer_model =
|
|
default_print_profile =
|
|
default_filament_profile =
|
|
|
|
[printer:Creality ENDER-3]
|
|
inherits = *common*
|
|
printer_model = ENDER3
|
|
printer_variant = 0.4
|
|
max_layer_height = 0.25
|
|
min_layer_height = 0.1
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3
|
|
bed_shape = 0x0,220x0,220x220,0x220
|
|
max_print_height = 250
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 500
|
|
machine_max_acceleration_retracting = 1000
|
|
machine_max_acceleration_x = 500
|
|
machine_max_acceleration_y = 500
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 10
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 8
|
|
machine_max_jerk_y = 8
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
nozzle_diameter = 0.4
|
|
retract_before_travel = 2
|
|
retract_length = 5
|
|
retract_speed = 60
|
|
deretract_speed = 40
|
|
retract_before_wipe = 70%
|
|
default_print_profile = 0.20mm NORMAL
|
|
default_filament_profile = Creality PLA
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E30 F1200.0 ; intro line\nG92 E0.0
|
|
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y200 F3000 ; present print\nM84 X Y E ; disable motors |