PrusaSlicer-NonPlainar/resources/localization/Slic3rPE.pot

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-05-10 11:46+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: src/slic3r/GUI/AboutDialog.cpp:35
#, possible-c-format
msgid "About %s"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:67 src/slic3r/GUI/MainFrame.cpp:59
msgid "Version"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:92
msgid "Copyright"
msgstr ""

#. TRN "Slic3r _is licensed under the_ License"
#: src/slic3r/GUI/AboutDialog.cpp:94
msgid "is licensed under the"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:95
msgid "GNU Affero General Public License, version 3"
msgstr ""

#: src/slic3r/GUI/AboutDialog.cpp:96
msgid ""
"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
"numerous others."
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:400
msgid "Copying of the temporary G-code to the output G-code failed"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:398
msgid "Running post-processing scripts"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:87
msgid "G-code file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:91
#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:109
msgid "Slicing complete"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:105
msgid "Masked SLA file exported to %1%"
msgstr ""

#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:409
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:60
msgid "Shape"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:68
msgid "Rectangular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:72
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:137
#: src/slic3r/GUI/Tab.cpp:2258
msgid "Size"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:73
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:79
msgid "Origin"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:84
msgid "Circular"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:87 src/slic3r/GUI/ConfigWizard.cpp:118
#: src/slic3r/GUI/ConfigWizard.cpp:565 src/slic3r/GUI/ConfigWizard.cpp:579
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
#: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:84
#: src/libslic3r/PrintConfig.cpp:60 src/libslic3r/PrintConfig.cpp:67
#: src/libslic3r/PrintConfig.cpp:76 src/libslic3r/PrintConfig.cpp:211
#: src/libslic3r/PrintConfig.cpp:286 src/libslic3r/PrintConfig.cpp:294
#: src/libslic3r/PrintConfig.cpp:344 src/libslic3r/PrintConfig.cpp:354
#: src/libslic3r/PrintConfig.cpp:474 src/libslic3r/PrintConfig.cpp:485
#: src/libslic3r/PrintConfig.cpp:503 src/libslic3r/PrintConfig.cpp:681
#: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1252
#: src/libslic3r/PrintConfig.cpp:1270 src/libslic3r/PrintConfig.cpp:1288
#: src/libslic3r/PrintConfig.cpp:1340 src/libslic3r/PrintConfig.cpp:1350
#: src/libslic3r/PrintConfig.cpp:1471 src/libslic3r/PrintConfig.cpp:1479
#: src/libslic3r/PrintConfig.cpp:1520 src/libslic3r/PrintConfig.cpp:1528
#: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:1546
#: src/libslic3r/PrintConfig.cpp:1554 src/libslic3r/PrintConfig.cpp:1637
#: src/libslic3r/PrintConfig.cpp:1853 src/libslic3r/PrintConfig.cpp:1923
#: src/libslic3r/PrintConfig.cpp:1957 src/libslic3r/PrintConfig.cpp:2150
#: src/libslic3r/PrintConfig.cpp:2157 src/libslic3r/PrintConfig.cpp:2164
#: src/libslic3r/PrintConfig.cpp:2194 src/libslic3r/PrintConfig.cpp:2204
#: src/libslic3r/PrintConfig.cpp:2214 src/libslic3r/PrintConfig.cpp:2322
#: src/libslic3r/PrintConfig.cpp:2397 src/libslic3r/PrintConfig.cpp:2406
#: src/libslic3r/PrintConfig.cpp:2415 src/libslic3r/PrintConfig.cpp:2425
#: src/libslic3r/PrintConfig.cpp:2469 src/libslic3r/PrintConfig.cpp:2479
#: src/libslic3r/PrintConfig.cpp:2498 src/libslic3r/PrintConfig.cpp:2508
#: src/libslic3r/PrintConfig.cpp:2517 src/libslic3r/PrintConfig.cpp:2535
#: src/libslic3r/PrintConfig.cpp:2550 src/libslic3r/PrintConfig.cpp:2564
#: src/libslic3r/PrintConfig.cpp:2577 src/libslic3r/PrintConfig.cpp:2587
msgid "mm"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:88 src/libslic3r/PrintConfig.cpp:678
msgid "Diameter"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:89
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:93 src/slic3r/GUI/GUI_Preview.cpp:239
#: src/libslic3r/GCode/PreviewData.cpp:175
msgid "Custom"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:97
msgid "Load shape from STL..."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:143
msgid "Settings"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:316
msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/GUI_ObjectList.cpp:1443
msgid "Error! "
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:342
msgid "The selected file contains no geometry."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.cpp:346
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: src/slic3r/GUI/BedShapeDialog.hpp:45 src/slic3r/GUI/ConfigWizard.cpp:530
msgid "Bed Shape"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr ""

#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr ""

#: src/slic3r/GUI/ButtonsDescription.cpp:53
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
msgid "Upgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
msgid "Downgrade"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
msgid "Before roll back"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "User"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
msgid "Unknown"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:39
msgid "Active: "
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
msgid "slic3r version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1274
#: src/slic3r/GUI/Tab.hpp:315
msgid "print"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47
msgid "filaments"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:48 src/slic3r/GUI/Preset.cpp:1278
#: src/slic3r/GUI/Tab.hpp:366
msgid "printer"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:929
msgid "vendor"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
msgid "min slic3r version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
msgid "max slic3r version"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "model"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
msgid "variants"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70
#, possible-c-format
msgid "Incompatible with this %s"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:73
msgid "Activate"
msgstr ""

#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:99
msgid "Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:118
msgid "nozzle"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:122
msgid "Alternate nozzles:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:188
msgid "All standard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:189 src/slic3r/GUI/Tab.cpp:3000
msgid "All"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:190 src/slic3r/GUI/Plater.cpp:433
#: src/libslic3r/GCode/PreviewData.cpp:162
msgid "None"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:296
#, possible-c-format
msgid "Welcome to the %s Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:298
#, possible-c-format
msgid "Welcome to the %s Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:300
msgid "Welcome"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/GUI_App.cpp:670
#, possible-c-format
msgid "Run %s"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:306
#, possible-c-format
msgid ""
"Hello, welcome to %s! This %s helps you with the initial configuration; just "
"a few settings and you will be ready to print."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:311
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:342
#, possible-c-format
msgid "%s Family"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:379
msgid "Custom Printer Setup"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:379
msgid "Custom Printer"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:381
msgid "Define a custom printer profile"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:383
msgid "Custom profile name:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:407
msgid "Automatic updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:407
msgid "Updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:415 src/slic3r/GUI/Preferences.cpp:61
msgid "Check for application updates"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:419
#, possible-c-format
msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:425 src/slic3r/GUI/Preferences.cpp:69
msgid "Update built-in Presets automatically"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:429
#, possible-c-format
msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:432
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:437
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:444
msgid "Other Vendors"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:446
#, possible-c-format
msgid "Pick another vendor supported by %s:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:492
msgid "Firmware Type"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:492 src/slic3r/GUI/Tab.cpp:1921
msgid "Firmware"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:496
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:530
msgid "Bed Shape and Size"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:533
msgid "Set the shape of your printer's bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:547
msgid "Filament and Nozzle Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:547
msgid "Print Diameters"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:561
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:564
msgid "Nozzle Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:574
msgid "Enter the diameter of your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:575
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:578
msgid "Filament Diameter:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:596
msgid "Extruder and Bed Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:596
msgid "Temperatures"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:612
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:613
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:616
msgid "Extrusion Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:617 src/slic3r/GUI/ConfigWizard.cpp:631
msgid "°C"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:626
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:627
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:630
msgid "Bed Temperature:"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1093
msgid "Select all standard printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1096
msgid "< &Back"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1097
msgid "&Next >"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1098
msgid "&Finish"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1099 src/slic3r/GUI/FirmwareDialog.cpp:147
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37
#: src/slic3r/GUI/ProgressStatusBar.cpp:28
msgid "Cancel"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1113
msgid "Prusa FFF Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1116
msgid "Prusa MSLA Technology Printers"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1185
msgid "Configuration Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1186
msgid "Configuration &Assistant"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1188
msgid "Configuration Wizard"
msgstr ""

#: src/slic3r/GUI/ConfigWizard.cpp:1189
msgid "Configuration &Wizard"
msgstr ""

#: src/slic3r/GUI/Field.cpp:93
msgid "default value"
msgstr ""

#: src/slic3r/GUI/Field.cpp:96
msgid "parameter name"
msgstr ""

#: src/slic3r/GUI/Field.cpp:124
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: src/slic3r/GUI/Field.cpp:138 src/slic3r/GUI/Field.cpp:161
msgid "Invalid numeric input."
msgstr ""

#: src/slic3r/GUI/Field.cpp:143
msgid "Input value is out of range"
msgstr ""

#: src/slic3r/GUI/Field.cpp:169
#, possible-c-format
msgid ""
"Do you mean %d%% instead of %d %s?\n"
"Select YES if you want to change this value to %d%%, \n"
"or NO if you are sure that %d %s is a correct value."
msgstr ""

#: src/slic3r/GUI/Field.cpp:172
msgid "Parameter validation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:146
msgid "Flash!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:148
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:192
msgid "Flashing failed: "
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:273
msgid "Flashing succeeded!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:274
msgid "Flashing failed. Please see the avrdude log below."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:275
msgid "Flashing cancelled."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:313
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:400 src/slic3r/GUI/FirmwareDialog.cpp:436
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:417
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:530
#, possible-c-format
msgid "The %s device could not have been found"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:608
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:610
#, possible-c-format
msgid "Error: %s"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:740
msgid "Firmware flasher"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:765
msgid "Firmware image:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:768 src/slic3r/GUI/Tab.cpp:1682
msgid "Browse"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:770
msgid "Serial port:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:772
msgid "Autodetected"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:773
msgid "Rescan"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:780
msgid "Progress:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:783
msgid "Status:"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:784
msgid "Ready"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:804
msgid "Advanced: Output log"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:815
#: src/slic3r/GUI/PrintHostDialogs.cpp:160
msgid "Close"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:863
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:864
msgid "Confirmation"
msgstr ""

#: src/slic3r/GUI/FirmwareDialog.cpp:867
msgid "Cancelling..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:719
msgid "Detected object outside print volume"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:720
msgid "Detected toolpath outside print volume"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:721
msgid "Detected support outside print volume"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:722
msgid "Some objects are not visible when editing supports"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:724
msgid ""
"Detected object outside print volume\n"
"Resolve a clash to continue slicing/export process correctly"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3395
msgid "Add..."
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3405 src/slic3r/GUI/GUI_ObjectList.cpp:1269
#: src/slic3r/GUI/Plater.cpp:2908 src/slic3r/GUI/Plater.cpp:2926
#: src/slic3r/GUI/Tab.cpp:2951
msgid "Delete"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3416 src/slic3r/GUI/Plater.cpp:3316
msgid "Delete all"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3427 src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Arrange"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3441 src/slic3r/GUI/Tab.cpp:2892
msgid "Copy"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3452
msgid "Paste"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3466
msgid "Add instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3478
msgid "Remove instance"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3493
msgid "Split to objects"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3505 src/slic3r/GUI/GUI_ObjectList.cpp:1122
msgid "Split to parts"
msgstr ""

#: src/slic3r/GUI/GLCanvas3D.cpp:3520
msgid "Layers editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195
msgid "Rotate lower part upwards"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198
msgid "Perform cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:43
msgid "Cut object:"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3039
msgid "Cut"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
msgid "Keep upper part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
msgid "Keep lower part"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32
msgid "Place on face"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51
msgid "Move"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
msgid "Position (mm)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
msgid "Displacement (mm)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:342
#: src/libslic3r/PrintConfig.cpp:3088
msgid "Rotate"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491
msgid "Rotation (deg)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:231
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:343
#: src/libslic3r/PrintConfig.cpp:3103
msgid "Scale"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276
msgid "Scale (%)"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:840
msgid "Head diameter: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:853
msgid "Lock supports under new islands"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:857
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1239
msgid "Remove selected points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:861
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:914
msgid "Remove all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:866
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242
msgid "Apply changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:871
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1243
msgid "Discard changes"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:879
msgid "Minimal points distance: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:890
msgid "Support points density: "
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:904
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1245
msgid "Auto-generate points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:910
msgid "Manual editing"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:928
msgid "Clipping of view:"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:930
msgid "Reset direction"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:997
msgid "SLA Support Points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024
msgid "Do you want to save your manually edited support points?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025
msgid "Save changes?"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1168
msgid ""
"Autogeneration will erase all manually edited points.\n"
"\n"
"Are you sure you want to do it?\n"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1170 src/slic3r/GUI/GUI.cpp:283
#: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328
msgid "Warning"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1202
msgid "SLA gizmo keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
msgid "Note: some shortcuts work in (non)editing mode only."
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
msgid "Left click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
msgid "Add point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
msgid "Right click"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
msgid "Remove point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
msgid "Drag"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
msgid "Move point"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
msgid "Add point to selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
msgid "Remove point from selection"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
msgid "Select by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
msgid "Deselect by rectangle"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1238
msgid "Select all points"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
msgid "Mouse wheel"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
msgid "Move clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1241
msgid "Reset clipping plane"
msgstr ""

#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1244
msgid "Switch to editing mode"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:142 src/slic3r/GUI/Tab.cpp:2810
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:143
msgid "Please check and fix your object list."
msgstr ""

#: src/slic3r/GUI/GUI.cpp:144 src/slic3r/GUI/Tab.cpp:2812
msgid "Attention!"
msgstr ""

#: src/slic3r/GUI/GUI.cpp:277
msgid "Notice"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:390
msgid "Changing of an application language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:398 src/slic3r/GUI/GUI_App.cpp:407
msgid "Recreating"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:411
msgid "Loading of current presets"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:419
msgid "Loading of a mode view"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:501
msgid "Choose one file (3MF):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:513
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:526
msgid "Array of language names and identifiers should have the same size."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:536
msgid "Select the language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:536
msgid "Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:606 src/slic3r/GUI/GUI_ObjectList.cpp:1257
#: src/libslic3r/PrintConfig.cpp:300
msgid "Default"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:673
msgid "&Configuration Snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:673
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:674
msgid "Take Configuration &Snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:674
msgid "Capture a configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:677
msgid "&Preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:683
msgid "Application preferences"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:686 src/slic3r/GUI/wxExtensions.cpp:2509
msgid "Simple"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:686
msgid "Simple View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:687 src/slic3r/GUI/GUI_ObjectList.cpp:85
#: src/slic3r/GUI/GUI_ObjectList.cpp:539 src/slic3r/GUI/Tab.cpp:1027
#: src/slic3r/GUI/Tab.cpp:1042 src/slic3r/GUI/Tab.cpp:1140
#: src/slic3r/GUI/Tab.cpp:1143 src/slic3r/GUI/Tab.cpp:1516
#: src/slic3r/GUI/Tab.cpp:1941 src/slic3r/GUI/Tab.cpp:3453
#: src/slic3r/GUI/wxExtensions.cpp:2510 src/libslic3r/PrintConfig.cpp:73
#: src/libslic3r/PrintConfig.cpp:188 src/libslic3r/PrintConfig.cpp:351
#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:2200
msgid "Advanced"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:687
msgid "Advanced View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:688 src/slic3r/GUI/wxExtensions.cpp:2511
msgid "Expert"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:688
msgid "Expert View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:693
msgid "Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:693
#, possible-c-format
msgid "%s View Mode"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:695
msgid "Change Application &Language"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:697
msgid "Flash printer &firmware"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:697
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:709
msgid "Taking configuration snapshot"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:709
msgid "Snapshot name"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:752
msgid ""
"Switching the language will trigger application restart.\n"
"You will lose content of the plater."
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:754
msgid "Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:755
msgid "Language selection"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:781
msgid "&Configuration"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:801
msgid "The following presets were modified"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:801 src/slic3r/GUI/Tab.cpp:2798
msgid "Discard changes and continue anyway?"
msgstr ""

#: src/slic3r/GUI/GUI_App.cpp:802
msgid "Unsaved Presets"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:77
#: src/slic3r/GUI/GUI_ObjectList.cpp:531 src/libslic3r/PrintConfig.cpp:57
#: src/libslic3r/PrintConfig.cpp:151 src/libslic3r/PrintConfig.cpp:382
#: src/libslic3r/PrintConfig.cpp:439 src/libslic3r/PrintConfig.cpp:447
#: src/libslic3r/PrintConfig.cpp:843 src/libslic3r/PrintConfig.cpp:1027
#: src/libslic3r/PrintConfig.cpp:1330 src/libslic3r/PrintConfig.cpp:1396
#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:2012
#: src/libslic3r/PrintConfig.cpp:2069
msgid "Layers and Perimeters"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:78
#: src/slic3r/GUI/GUI_ObjectList.cpp:532 src/slic3r/GUI/Plater.cpp:447
#: src/slic3r/GUI/Tab.cpp:1031 src/slic3r/GUI/Tab.cpp:1032
#: src/slic3r/GUI/Tab.cpp:1361 src/libslic3r/PrintConfig.cpp:168
#: src/libslic3r/PrintConfig.cpp:390 src/libslic3r/PrintConfig.cpp:730
#: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:781
#: src/libslic3r/PrintConfig.cpp:934 src/libslic3r/PrintConfig.cpp:944
#: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:980
#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:1684
#: src/libslic3r/PrintConfig.cpp:1701
msgid "Infill"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:79
#: src/slic3r/GUI/GUI_ObjectList.cpp:533 src/slic3r/GUI/GUI_Preview.cpp:236
#: src/slic3r/GUI/Tab.cpp:1060 src/slic3r/GUI/Tab.cpp:1061
#: src/libslic3r/PrintConfig.cpp:335 src/libslic3r/PrintConfig.cpp:1457
#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1811
#: src/libslic3r/PrintConfig.cpp:1819 src/libslic3r/PrintConfig.cpp:1831
#: src/libslic3r/PrintConfig.cpp:1841 src/libslic3r/PrintConfig.cpp:1849
#: src/libslic3r/PrintConfig.cpp:1864 src/libslic3r/PrintConfig.cpp:1885
#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:1912
#: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1930
#: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:1955
#: src/libslic3r/PrintConfig.cpp:1963 src/libslic3r/PrintConfig.cpp:1964
#: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:1981
#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/GCode/PreviewData.cpp:172
msgid "Support material"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:81
#: src/slic3r/GUI/GUI_ObjectList.cpp:535 src/slic3r/GUI/Tab.cpp:1120
#: src/slic3r/GUI/Tab.cpp:1845 src/libslic3r/PrintConfig.cpp:457
#: src/libslic3r/PrintConfig.cpp:955 src/libslic3r/PrintConfig.cpp:1365
#: src/libslic3r/PrintConfig.cpp:1693 src/libslic3r/PrintConfig.cpp:1877
#: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2176
#: src/libslic3r/PrintConfig.cpp:2184
msgid "Extruders"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:39
msgid "Pad and Support"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:45
msgid "Add part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:46
msgid "Add modifier"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:47
msgid "Add support enforcer"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:48
msgid "Add support blocker"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:80 src/slic3r/GUI/GUI_ObjectList.cpp:534
#: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1085
#: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:427
#: src/libslic3r/PrintConfig.cpp:872 src/libslic3r/PrintConfig.cpp:1000
#: src/libslic3r/PrintConfig.cpp:1386 src/libslic3r/PrintConfig.cpp:1623
#: src/libslic3r/PrintConfig.cpp:1672 src/libslic3r/PrintConfig.cpp:1723
#: src/libslic3r/PrintConfig.cpp:2054
msgid "Speed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:82 src/slic3r/GUI/GUI_ObjectList.cpp:536
#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:524
#: src/libslic3r/PrintConfig.cpp:831 src/libslic3r/PrintConfig.cpp:963
#: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1713
#: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:2043
msgid "Extrusion Width"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:87 src/slic3r/GUI/GUI_ObjectList.cpp:541
#: src/slic3r/GUI/Plater.cpp:429 src/slic3r/GUI/Tab.cpp:3415
#: src/slic3r/GUI/Tab.cpp:3416 src/libslic3r/PrintConfig.cpp:2388
#: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:2404
#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2423
#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2456
#: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2477
#: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496
#: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2515
#: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2533
msgid "Supports"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:88 src/slic3r/GUI/GUI_ObjectList.cpp:542
#: src/slic3r/GUI/Tab.cpp:3443 src/slic3r/GUI/Tab.cpp:3444
#: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2548
#: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2572
#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594
msgid "Pad"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:203
msgid "Name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:257
#, possible-c-format
msgid "Auto-repaired (%d errors):\n"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:264
msgid "degenerate facets"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:265
msgid "edges fixed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:266
msgid "facets removed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:267
msgid "facets added"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:268
msgid "facets reversed"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:269
msgid "backwards edges"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:277
msgid "Right button click the icon to fix STL through Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:306
msgid "Right button click the icon to change the object settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:362 src/slic3r/GUI/Tab.cpp:1480
#: src/libslic3r/PrintConfig.cpp:456
msgid "Extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:876 src/slic3r/GUI/GUI_ObjectList.cpp:1151
#: src/slic3r/GUI/GUI_ObjectList.cpp:1157
#: src/slic3r/GUI/GUI_ObjectList.cpp:1389
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:939
msgid "Select showing settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1072
msgid "Load"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
#: src/slic3r/GUI/GUI_ObjectList.cpp:1102
#: src/slic3r/GUI/GUI_ObjectList.cpp:1105
msgid "Box"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
msgid "Cylinder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
msgid "Sphere"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
msgid "Slab"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1130
msgid "Add settings"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1197
msgid "Change type"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1204
#: src/slic3r/GUI/GUI_ObjectList.cpp:1343
msgid "Set as a Separated Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1212
msgid "Rename"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1222
msgid "Fix through the Netfabb"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1231 src/slic3r/GUI/Plater.cpp:2944
msgid "Export as STL"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1238
msgid "Change extruder"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1263
msgid "Select new extruder for the object/part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1343
msgid "Set as a Separated Objects"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1556
msgid "Generic"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1699
msgid "You can't delete the last solid part from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1716
msgid "You can't delete the last intance from object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1742 src/slic3r/GUI/Plater.cpp:2290
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1851
msgid "Group manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1863
msgid "Object manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1873
msgid "Object Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1877
msgid "Part Settings to modify"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1886
msgid "Part manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:1892
msgid "Instance manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2417
msgid "Object or Instance"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2417
msgid "Part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2419
msgid "Unsupported selection"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2420
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2421
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2424
msgid "of a current Object"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2429
#: src/slic3r/GUI/GUI_ObjectList.cpp:2502 src/slic3r/GUI/Plater.cpp:118
msgid "Info"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2543
msgid "You can't change a type of the last solid part of the object."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2550
msgid "Select type of part"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2714
msgid "Enter new name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2714
msgid "Renaming"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2730
#: src/slic3r/GUI/GUI_ObjectList.cpp:2824 src/slic3r/GUI/Tab.cpp:3296
#: src/slic3r/GUI/Tab.cpp:3300
msgid "The supplied name is not valid;"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2731
#: src/slic3r/GUI/GUI_ObjectList.cpp:2825 src/slic3r/GUI/Tab.cpp:3297
msgid "the following characters are not allowed:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2845
msgid "Set extruder for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2846
msgid "Select extruder number for selected objects and/or parts"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2859
msgid "Select extruder number:"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectList.cpp:2860
msgid "This extruder will be set for selected items"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:40
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:83
msgid "World coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:41
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84
msgid "Local coordinates"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60
msgid "Select coordinate space, in which the transformation will be performed."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:102
msgid "Object Manipulation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
msgid "Object name"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:282
msgid "Position"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:283
msgid "Rotation"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
msgid "Scale factors"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
msgid "Translate"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
msgid ""
"The currently manipulated object is tilted (rotation angles are not "
"multiples of 90°).\n"
"Non-uniform scaling of tilted objects is only possible in the World "
"coordinate system,\n"
"once the rotation is embedded into the object coordinates."
msgstr ""

#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:643
msgid ""
"This operation is irreversible.\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/GUI_ObjectSettings.cpp:58
msgid "Additional Settings"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:209
msgid "View"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:537
#: src/libslic3r/GCode/PreviewData.cpp:394
msgid "Feature type"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:469
msgid "Height"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2162
msgid "Width"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:216
msgid "Volumetric flow rate"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:315
#: src/slic3r/GUI/GUI_Preview.cpp:481 src/slic3r/GUI/GUI_Preview.cpp:537
#: src/slic3r/GUI/GUI_Preview.cpp:713 src/libslic3r/GCode/PreviewData.cpp:404
msgid "Tool"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/GUI_Preview.cpp:535
#: src/libslic3r/GCode/PreviewData.cpp:406
msgid "Color Print"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:221
msgid "Show"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:225
msgid "Feature types"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/GCode/PreviewData.cpp:163
msgid "Perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/GCode/PreviewData.cpp:164
msgid "External perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/GCode/PreviewData.cpp:165
msgid "Overhang perimeter"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/GCode/PreviewData.cpp:166
msgid "Internal infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1712
#: src/libslic3r/PrintConfig.cpp:1722 src/libslic3r/GCode/PreviewData.cpp:167
msgid "Solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2042
#: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/GCode/PreviewData.cpp:168
msgid "Top solid infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/GCode/PreviewData.cpp:169
msgid "Bridge infill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:871
#: src/libslic3r/GCode/PreviewData.cpp:170
msgid "Gap fill"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1051
#: src/libslic3r/GCode/PreviewData.cpp:171
msgid "Skirt"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1929
#: src/libslic3r/GCode/PreviewData.cpp:173
msgid "Support material interface"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1131
#: src/libslic3r/GCode/PreviewData.cpp:174
msgid "Wipe tower"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2076
msgid "Travel"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:244
msgid "Retractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:245
msgid "Unretractions"
msgstr ""

#: src/slic3r/GUI/GUI_Preview.cpp:246
msgid "Shells"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:13 src/slic3r/GUI/MainFrame.cpp:571
msgid "Keyboard Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Load Config from .ini/amf/3mf/gcode"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:740
#: src/slic3r/GUI/Plater.cpp:3839 src/libslic3r/PrintConfig.cpp:2990
msgid "Export G-code"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Save project (3MF)"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
msgid "Load Config from .ini/amf/3mf/gcode and merge"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "(Re)slice"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
msgid "Select Plater Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
msgid "Select Print Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
msgid "Select Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Select Printer Settings Tab"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Switch to 3D"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Switch to Preview"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:121 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
#: src/slic3r/GUI/PrintHostDialogs.cpp:135
msgid "Print host upload queue"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
msgid "Camera view"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
msgid "Add Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
msgid "Remove Instance of the selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
msgid "Show keyboard shortcuts list"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
msgid "Press to select multiple object or move multiple object with mouse"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
msgid "Main Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid "Select All objects"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Delete selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Delete All"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Copy to clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
msgid "Paste from clipboard"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Gizmo scale"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Gizmo rotate"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Gizmo cut"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Gizmo Place face on bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Gizmo SLA support points"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
#, possible-c-format
msgid ""
"Press to snap by 5% in Gizmo scale\n"
"or by 1mm in Gizmo move"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
msgid ""
"Press to scale or rotate selected objects\n"
"around their own center"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Zoom to Bed"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
msgid "Zoom to all objects in scene, if none selected"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
msgid "Zoom to selected object"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
msgid "Zoom in"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
msgid "Zoom out"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
msgid "Unselect gizmo, keep object selection"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
msgid "Plater Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Arrow Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
msgid "Upper Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
msgid "Arrow Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
msgid "Lower Layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Preview Shortcuts"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Move current slider thumb Up"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
msgid "Move current slider thumb Down"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "Arrow Left"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
msgid "Set upper thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Arrow Right"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
msgid "Set lower thumb to current slider thumb"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
msgid "Add color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
msgid "Delete color change marker for current layer"
msgstr ""

#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
msgid "Layers Slider Shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:61
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:163
msgid "Plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:344
msgid "&Open Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:344
msgid "Open a project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:346
msgid "&Save Project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:346
msgid "Save current project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:348
msgid "Save Project &as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:348
msgid "Save current project file as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:354
msgid "Import STL/OBJ/AM&F/3MF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:354
msgid "Load a model"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:357
msgid "Import &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:357
msgid "Load exported configuration file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:359
msgid "Import Config from &project"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:359
msgid "Load configuration from project file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:362
msgid "Import Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:362
msgid "Load presets from a bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:364
msgid "&Import"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:367 src/slic3r/GUI/MainFrame.cpp:607
msgid "Export &G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:367
msgid "Export current plate as G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:371
msgid "Export plate as &STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:371
msgid "Export current plate as STL"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:373
msgid "Export plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:373
msgid "Export current plate as STL including supports"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:375
msgid "Export plate as &AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:375
msgid "Export current plate as AMF"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:378
msgid "Export &Config"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:378
msgid "Export current configuration to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:380
msgid "Export Config &Bundle"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:380
msgid "Export all presets to file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:382
msgid "&Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:388
msgid "Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:388
msgid "Slice a file into a G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:394
msgid "Quick Slice and Save As"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:394
msgid "Slice a file into a G-code, save as"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:400
msgid "Repeat Last Quick Slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:400
msgid "Repeat last quick slice"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "(Re)Slice &Now"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:408
msgid "Start new slicing process"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:411
msgid "&Repair STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:411
msgid "Automatically repair an STL file"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:414
msgid "&Quit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:414
#, possible-c-format
msgid "Quit %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:449
msgid "&Select all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:449
msgid "Selects all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:452
msgid "&Delete selected"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:452
msgid "Deletes the current selection"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:454
msgid "Delete &all"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:454
msgid "Deletes all objects"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:459
msgid "&Copy"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:459
msgid "Copy selection to clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:461
msgid "&Paste"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:461
msgid "Paste clipboard"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:476
msgid "&Plater Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:476
msgid "Show the plater"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:483
msgid "P&rint Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:483
msgid "Show the print settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:485 src/slic3r/GUI/MainFrame.cpp:609
msgid "&Filament Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:485
msgid "Show the filament settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:488
msgid "Print&er Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:488
msgid "Show the printer settings"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "3&D"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:492
msgid "Show the 3D editing view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:494
msgid "Pre&view"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:494
msgid "Show the 3D slices preview"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:515
msgid "Print &Host Upload Queue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:515
msgid "Display the Print Host Upload Queue window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Iso"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Iso View"
msgstr ""

#. TRN To be shown in the main menu View->Top
#: src/slic3r/GUI/MainFrame.cpp:527
msgctxt "Layers"
msgid "Top"
msgstr ""

#. TRN To be shown in Print Settings "Top solid layers"
#: src/libslic3r/PrintConfig.cpp:2068
msgid "Top"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:527
msgid "Top View"
msgstr ""

#. TRN To be shown in the main menu View->Bottom
#: src/slic3r/GUI/MainFrame.cpp:529
msgid "Bottom"
msgstr ""

#. TRN To be shown in Print Settings "Bottom solid layers"
#: src/libslic3r/PrintConfig.cpp:150
msgctxt "Layers"
msgid "Bottom"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:529
msgid "Bottom View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:530
msgid "Front"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:530
msgid "Front View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:531 src/libslic3r/PrintConfig.cpp:1587
msgid "Rear"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:531
msgid "Rear View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "Left"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:532
msgid "Left View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:533
msgid "Right"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:533
msgid "Right View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:547
msgid "Prusa 3D &Drivers"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:547
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:549
msgid "Prusa Edition &Releases"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:549
msgid "Open the Prusa Edition releases page in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:555
#, possible-c-format
msgid "%s &Website"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:556
#, possible-c-format
msgid "Open the %s website in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:558
#, possible-c-format
msgid "%s &Manual"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:559
#, possible-c-format
msgid "Open the %s manual in your browser"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:562
msgid "System &Info"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:562
msgid "Show system information"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:564
msgid "Show &Configuration Folder"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:564
msgid "Show user configuration folder (datadir)"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:566
msgid "Report an I&ssue"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:566
#, possible-c-format
msgid "Report an issue on %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:568
#, possible-c-format
msgid "&About %s"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:568
msgid "Show about dialog"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:571
msgid "Show the list of the keyboard shortcuts"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:579
msgid "&File"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:580
msgid "&Edit"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:581
msgid "&Window"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:582
msgid "&View"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:585
msgid "&Help"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:3839
msgid "Export"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:609
msgid "Mate&rial Settings Tab"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:630
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:644
msgid "No previously sliced file."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:645 src/slic3r/GUI/PrintHostDialogs.cpp:230
msgid "Error"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:650
msgid "Previously sliced file ("
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:650
msgid ") not found."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:651
msgid "File Not Found"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686 src/slic3r/GUI/Tab.cpp:3257
msgid "Save "
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "SVG"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686
msgid "G-code"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:686
msgid " file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:701
msgid "Save zip file as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:713 src/slic3r/GUI/Plater.cpp:2423
#: src/slic3r/GUI/Plater.cpp:3633 src/slic3r/GUI/Tab.cpp:1160
#: src/slic3r/GUI/Tab.cpp:3454
msgid "Slicing"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:713
msgid "Processing "
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:736
msgid " was successfully sliced."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:738
msgid "Slicing Done!"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:753
msgid "Select the STL file to repair:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:766
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:781
msgid "Your file was repaired."
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:781 src/libslic3r/PrintConfig.cpp:3084
msgid "Repair"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:795
msgid "Save configuration as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:815 src/slic3r/GUI/MainFrame.cpp:879
msgid "Select configuration to load:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:852
msgid "Save presets bundle as:"
msgstr ""

#: src/slic3r/GUI/MainFrame.cpp:903
#, possible-c-format
msgid "%d presets successfully imported."
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:73
#, possible-c-format
msgid "%s error"
msgstr ""

#: src/slic3r/GUI/MsgDialog.cpp:74
#, possible-c-format
msgid "%s has encountered an error"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:138
msgid "Volume"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:139
msgid "Facets"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:140
msgid "Materials"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:143
msgid "Manifold"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:193
msgid "Sliced Info"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:1048
msgid "Used Filament (m)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:213
msgid "Used Filament (mm³)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:214
msgid "Used Filament (g)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:215
msgid "Used Material (unit)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:216 src/slic3r/GUI/Plater.cpp:1063
#: src/libslic3r/PrintConfig.cpp:718
msgid "Cost"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:217 src/slic3r/GUI/Plater.cpp:1035
#: src/slic3r/GUI/Plater.cpp:1077
msgid "Estimated printing time"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:218
msgid "Number of tool changes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:292
msgid "Click to edit preset"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:432
msgid "Select what kind of support do you need"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:434 src/libslic3r/PrintConfig.cpp:1840
#: src/libslic3r/PrintConfig.cpp:2448
msgid "Support on build plate only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:435 src/slic3r/GUI/Plater.cpp:528
msgid "For support enforcers only"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:436
msgid "Everywhere"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:454 src/slic3r/GUI/Tab.cpp:1057
msgid "Brim"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:456
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:464
msgid "Purging volumes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:688
msgid "Print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:689 src/slic3r/GUI/Tab.cpp:1471
#: src/slic3r/GUI/Tab.cpp:1472
msgid "Filament"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:690
msgid "SLA print settings"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Preset.cpp:1277
msgid "SLA material"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:692
msgid "Printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:738 src/slic3r/GUI/Plater.cpp:3840
msgid "Send to printer"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:741 src/slic3r/GUI/Plater.cpp:2423
#: src/slic3r/GUI/Plater.cpp:3636
msgid "Slice now"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:880
msgid "Hold Shift to Slice & Export G-code"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:981
#, possible-c-format
msgid "%d (%d shells)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:986
#, possible-c-format
msgid "Auto-repaired (%d errors)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:989
#, possible-c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:999
msgid "Yes"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1022
msgid "Used Material (ml)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1025
msgid "object(s)"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1025
msgid "supports and pad"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
msgid "objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
msgid "wipe tower"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1080
msgid "normal mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1084
msgid "stealth mode"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1601
msgid "Loading"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1611
#, possible-c-format
msgid "Processing input file %s\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1669
msgid ""
"This file contains several objects positioned at multiple heights. Instead "
"of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1672 src/slic3r/GUI/Plater.cpp:1780
msgid "Multi-part object detected"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1723
msgid ""
"This file cannot be loaded in a simple mode. Do you want to switch to an "
"advanced mode?\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1724
msgid "Detected advanced data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1757
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1777
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?\n"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1793
msgid "Loaded"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1885
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1886
msgid "Object too large?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1936
msgid "Export STL file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1943
msgid "Export AMF file:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:1949
msgid "Save file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2114
msgid "Arranging canceled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2117
msgid "Arranging"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2151
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2155
msgid "Arranging done."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2196
msgid "Orientation search canceled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2201
msgid "Searching for optimal orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2262
msgid "Orientation found."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2282
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2408
msgid "Invalid data"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2417
msgid "Ready to slice"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2455 src/slic3r/GUI/PrintHostDialogs.cpp:231
msgid "Cancelling"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2472
msgid "Another export job is currently running."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2733
msgid "Export failed"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2738 src/slic3r/GUI/PrintHostDialogs.cpp:232
msgid "Cancelled"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2824 src/slic3r/GUI/Plater.cpp:2836
#: src/slic3r/GUI/Plater.cpp:2914
msgid "Increase copies"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2908 src/slic3r/GUI/Plater.cpp:2926
msgid "Remove the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2914
msgid "Place one more copy of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2916
msgid "Decrease copies"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2916
msgid "Remove one copy of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2918
msgid "Set number of copies"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2918
msgid "Change the number of copies of the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2941
msgid "Reload from Disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2941
msgid "Reload the selected file from Disk"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2944
msgid "Export the selected object as STL file"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2956
msgid "Along X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2956
msgid "Mirror the selected object along the X axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2958
msgid "Along Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2958
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2960
msgid "Along Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2960
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2963
msgid "Mirror"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2963
msgid "Mirror the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2983
msgid "To objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2983 src/slic3r/GUI/Plater.cpp:3005
msgid "Split the selected object into individual objects"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2985
msgid "To parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2985 src/slic3r/GUI/Plater.cpp:3025
msgid "Split the selected object into individual sub-parts"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2988 src/slic3r/GUI/Plater.cpp:3005
#: src/slic3r/GUI/Plater.cpp:3025 src/libslic3r/PrintConfig.cpp:3108
msgid "Split"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:2988
msgid "Split the selected object"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3011
msgid "Optimize orientation"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3011
msgid "Optimize the rotation of the object for better print results."
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3074
msgid "3D editor view"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3085 src/slic3r/GUI/Tab.cpp:2289
msgid "Preview"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3316
msgid "All objects will be removed, continue ?"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3451
msgid "Save G-code file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3451
msgid "Save SL1 file as:"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3563
#, possible-c-format
msgid "STL file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3579
#, possible-c-format
msgid "AMF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3582
#, possible-c-format
msgid "Error exporting AMF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3608
#, possible-c-format
msgid "3MF file exported to %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3611
#, possible-c-format
msgid "Error exporting 3MF file %s"
msgstr ""

#: src/slic3r/GUI/Plater.cpp:3840
msgid "Send G-code"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:19 src/slic3r/GUI/Tab.cpp:1813
#: src/slic3r/GUI/Tab.cpp:2014
msgid "General"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:36
msgid "Remember output directory"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:38
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:44
msgid "Auto-center parts"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:46
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:52
msgid "Background processing"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:54
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:63
msgid "If enabled, Slic3r checks for new versions of "
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:71
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:76
msgid "Suppress \" - default - \" presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:78
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:84
msgid "Show incompatible print and filament presets"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:86
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:93
msgid "Use legacy OpenGL 1.1 rendering"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:95
msgid ""
"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
"try to check this checkbox. This will disable the layer height editing and "
"anti aliasing, so it is likely better to upgrade your graphics driver."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:103
msgid "Use Retina resolution for the 3D scene"
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:105
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""

#: src/slic3r/GUI/Preferences.cpp:130
#, possible-c-format
msgid "You need to restart %s to make the changes effective."
msgstr ""

#: src/slic3r/GUI/Preset.cpp:207
msgid "modified"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:930 src/slic3r/GUI/Preset.cpp:970
#: src/slic3r/GUI/Preset.cpp:1035 src/slic3r/GUI/Preset.cpp:1067
#: src/slic3r/GUI/PresetBundle.cpp:1488 src/slic3r/GUI/PresetBundle.cpp:1553
msgid "System presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:974 src/slic3r/GUI/Preset.cpp:1071
#: src/slic3r/GUI/PresetBundle.cpp:1558
msgid "User presets"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1003 src/slic3r/GUI/Tab.cpp:238
msgid "Add a new printer"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1275 src/slic3r/GUI/Tab.hpp:333
msgid "filament"
msgstr ""

#: src/slic3r/GUI/Preset.cpp:1276
msgid "SLA print"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:28
#, possible-c-format
msgid ""
"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
"will be reduced so that no less than %ds are spent on that layer (however, "
"speed will never be reduced below %dmm/s)."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:32
#, possible-c-format
msgid ""
"\n"
"If estimated layer time is greater, but still below ~%ds, fan will run at a "
"proportionally decreasing speed between %d%% and %d%%."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:36
msgid ""
"\n"
"During the other layers, fan "
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:38
msgid "Fan "
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:43
#, possible-c-format
msgid "will always run at %d%% "
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:46
#, possible-c-format
msgid "except for the first %d layers"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:50
msgid "except for the first layer"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:52
msgid "will be turned off."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:153
msgid "external perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:162
msgid "perimeters"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:171
msgid "infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:181
msgid "solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:189
msgid "top solid infill"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:200
msgid "support"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:210
msgid "support interface"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:216
msgid "First layer volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:216
msgid "Bridging volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:216
msgid "Volumetric"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:217
msgid " flow rate is maximized "
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:220
msgid "by the print profile maximum"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:221
msgid "when printing "
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:222
msgid " with a volumetric rate "
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:226
#, possible-c-format
msgid "%3.2f mm³/s"
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:228
#, possible-c-format
msgid " at filament speed %3.2f mm/s."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:247
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:264
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and "
msgstr ""

#: src/slic3r/GUI/PresetHints.cpp:271
#, possible-c-format
msgid "%d lines: %.2lf mm"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Send G-Code to printer host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:33
msgid "Upload to Printer Host with the following filename:"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Start printing after upload"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:42
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:148
msgid "ID"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:149
msgid "Progress"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:150
msgid "Status"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:151
msgid "Host"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:152
msgid "Filename"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:153
msgid "Error Message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:156
msgid "Cancel selected"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:158
msgid "Show error message"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:197
#: src/slic3r/GUI/PrintHostDialogs.cpp:228
msgid "Enqueued"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:229
msgid "Uploading"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:233
msgid "Completed"
msgstr ""

#: src/slic3r/GUI/PrintHostDialogs.cpp:271
msgid "Error uploading to print host:"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81
#: src/slic3r/GUI/WipeTowerDialog.cpp:82 src/libslic3r/PrintConfig.cpp:613
#: src/libslic3r/PrintConfig.cpp:657 src/libslic3r/PrintConfig.cpp:672
#: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:2277
#: src/libslic3r/PrintConfig.cpp:2337 src/libslic3r/PrintConfig.cpp:2344
msgid "s"
msgstr ""

#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr ""

#: src/slic3r/GUI/SysInfoDialog.cpp:44
msgid "System Information"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:51 src/libslic3r/PrintConfig.cpp:230
msgid "Compatible printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:52
msgid "Select the printers this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:57 src/libslic3r/PrintConfig.cpp:245
msgid "Compatible print profiles"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:58
msgid "Select the print profiles this profile is compatible with."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:131
msgid "Save current "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:132
msgid "Delete this preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:137
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:915
msgid "It's a default preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:916
msgid "It's a system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:917
msgid "Current preset is inherited from "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:922
msgid "It can't be deleted or modified. "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:923
msgid ""
"Any modifications should be saved as a new preset inherited from this one. "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:924
msgid "To do that please specify a new name for the preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:928
msgid "Additional information:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:934
msgid "printer model"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:942
msgid "default print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:945
msgid "default filament profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:959
msgid "default SLA material profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:963
msgid "default SLA print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:998 src/slic3r/GUI/Tab.cpp:3409
msgid "Layers and perimeters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:999 src/libslic3r/PrintConfig.cpp:56
msgid "Layer height"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1003
msgid "Vertical shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1014
msgid "Horizontal shells"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1015 src/libslic3r/PrintConfig.cpp:1735
msgid "Solid layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1020
msgid "Quality (slower slicing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1038
msgid "Reducing printing time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1050
msgid "Skirt and brim"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1067
msgid "Raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1071
msgid "Options for support material and raft"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1086
msgid "Speed for print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1098
msgid "Speed for non-print moves"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1101
msgid "Modifiers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1104
msgid "Acceleration control (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1111
msgid "Autospeed (advanced)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1119
msgid "Multiple Extruders"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1127
msgid "Ooze prevention"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1144
msgid "Extrusion width"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1154
msgid "Overlap"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1157
msgid "Flow"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1166
msgid "Other"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1169 src/slic3r/GUI/Tab.cpp:3457
msgid "Output options"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1170
msgid "Sequential printing"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1172
msgid "Extruder clearance (mm)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1181 src/slic3r/GUI/Tab.cpp:3458
msgid "Output file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1188 src/libslic3r/PrintConfig.cpp:1408
msgid "Post-processing scripts"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1194 src/slic3r/GUI/Tab.cpp:1195
#: src/slic3r/GUI/Tab.cpp:1577 src/slic3r/GUI/Tab.cpp:1578
#: src/slic3r/GUI/Tab.cpp:1986 src/slic3r/GUI/Tab.cpp:1987
#: src/slic3r/GUI/Tab.cpp:2080 src/slic3r/GUI/Tab.cpp:2081
#: src/slic3r/GUI/Tab.cpp:3346 src/slic3r/GUI/Tab.cpp:3347
msgid "Notes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1201 src/slic3r/GUI/Tab.cpp:1585
#: src/slic3r/GUI/Tab.cpp:1993 src/slic3r/GUI/Tab.cpp:2087
#: src/slic3r/GUI/Tab.cpp:3354 src/slic3r/GUI/Tab.cpp:3463
msgid "Dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1202 src/slic3r/GUI/Tab.cpp:1586
#: src/slic3r/GUI/Tab.cpp:1994 src/slic3r/GUI/Tab.cpp:2088
#: src/slic3r/GUI/Tab.cpp:3355 src/slic3r/GUI/Tab.cpp:3464
msgid "Profile dependencies"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1248
#, possible-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- no ensure_vertical_shell_thickness\n"
"\n"
"Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1255
msgid "Spiral Vase"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1278
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0).\n"
"\n"
"Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1282 src/slic3r/GUI/Tab.cpp:1299
msgid "Wipe Tower"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1296
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers.\n"
"\n"
"Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1314
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters\n"
"\n"
"Shall I adjust those settings for supports?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1317
msgid "Support Generator"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1359
msgid "The "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1359
#, possible-c-format
msgid ""
" infill pattern is not supposed to work at 100% density.\n"
"\n"
"Shall I switch to rectilinear fill pattern?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1479
msgid "Temperature "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1485
msgid "Bed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1490
msgid "Cooling"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1491 src/libslic3r/PrintConfig.cpp:1311
#: src/libslic3r/PrintConfig.cpp:2124
msgid "Enable"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1502
msgid "Fan settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1503
msgid "Fan speed"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1511
msgid "Cooling thresholds"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1517
msgid "Filament properties"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1521
msgid "Print speed override"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1531
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1546
msgid "Ramming settings"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1564 src/slic3r/GUI/Tab.cpp:1949
msgid "Custom G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1565 src/slic3r/GUI/Tab.cpp:1950
#: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1776
msgid "Start G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1571 src/slic3r/GUI/Tab.cpp:1956
#: src/libslic3r/PrintConfig.cpp:360 src/libslic3r/PrintConfig.cpp:370
msgid "End G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1701 src/slic3r/GUI/Tab.cpp:1889
msgid "Test"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1711
msgid "Could not get a valid Printer Host reference"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1717 src/slic3r/GUI/Tab.cpp:1902
msgid "Success!"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1732
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1738
msgid " Browse "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1745
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1746
msgid "Open CA certificate file"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1774
#, possible-c-format
msgid ""
"HTTPS CA File:\n"
"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"    \tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1814 src/slic3r/GUI/Tab.cpp:2015
msgid "Size and coordinates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1819 src/slic3r/GUI/Tab.cpp:2020
#: src/slic3r/GUI/Tab.cpp:3002
msgid " Set "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1841
msgid "Capabilities"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1846
msgid "Number of extruders of the printer."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1874
msgid "USB/Serial connection"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1875 src/libslic3r/PrintConfig.cpp:1616
msgid "Serial port"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1880
msgid "Rescan serial ports"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1902
msgid "Connection to printer works correctly."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1905
msgid "Connection failed."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1918 src/slic3r/GUI/Tab.cpp:2075
msgid "Print Host upload"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1962 src/libslic3r/PrintConfig.cpp:129
msgid "Before layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1968 src/libslic3r/PrintConfig.cpp:1032
msgid "After layer change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1974 src/libslic3r/PrintConfig.cpp:2031
msgid "Tool change G-code"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:1980
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2042
msgid "Display"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2053
msgid "Tilt"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2054
msgid "Tilt time"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2060 src/slic3r/GUI/Tab.cpp:3328
msgid "Corrections"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2137 src/slic3r/GUI/Tab.cpp:2210
#: src/libslic3r/PrintConfig.cpp:1082 src/libslic3r/PrintConfig.cpp:1100
#: src/libslic3r/PrintConfig.cpp:1118 src/libslic3r/PrintConfig.cpp:1135
#: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1157
#: src/libslic3r/PrintConfig.cpp:1168
msgid "Machine limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2151
msgid "Values in this column are for Normal mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2152
msgid "Normal"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2157
msgid "Values in this column are for Stealth mode"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2158
msgid "Stealth"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2166
msgid "Maximum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2171
msgid "Maximum accelerations"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2178
msgid "Jerk limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2183
msgid "Minimum feedrates"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2232 src/slic3r/GUI/Tab.cpp:2240
msgid "Single extruder MM setup"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2241
msgid "Single extruder multimaterial parameters"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2254 src/libslic3r/GCode/PreviewData.cpp:475
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2261
msgid "Layer height limits"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2266
msgid "Position (for multi-extruder printers)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2269
msgid "Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2272
msgid "Only lift Z"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2285
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2443
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2445
msgid "Firmware Retraction"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2771
#, possible-c-format
msgid "Default preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2772
#, possible-c-format
msgid "Preset (%s)"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2789
msgid "has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2792
msgid "is not compatible with printer"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2793
msgid "is not compatible with print profile"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2795
msgid "and it has the following unsaved changes:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2799
msgid "Unsaved Changes"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2811
msgid "Please check your object list before preset changing."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2914
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2919
msgid "Cannot overwrite a system profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2923
msgid "Cannot overwrite an external profile."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2949
msgid "remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2949
msgid "delete"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2950
msgid "Are you sure you want to "
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2950
msgid " the selected preset?"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2951
msgid "Remove"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:2952
msgid " Preset"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3078
msgid "LOCKED LOCK"
msgstr ""

#. TRN Description for "LOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3080
msgid ""
"indicates that the settings are the same as the system values for the "
"current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3082
msgid "UNLOCKED LOCK"
msgstr ""

#. TRN Description for "UNLOCKED LOCK"
#: src/slic3r/GUI/Tab.cpp:3084
msgid ""
"indicates that some settings were changed and are not equal to the system "
"values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3089
msgid "WHITE BULLET"
msgstr ""

#. TRN Description for "WHITE BULLET"
#: src/slic3r/GUI/Tab.cpp:3091
msgid ""
"for the left button: \tindicates a non-system preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3094
msgid "BACK ARROW"
msgstr ""

#. TRN Description for "BACK ARROW"
#: src/slic3r/GUI/Tab.cpp:3096
msgid ""
"indicates that the settings were changed and are not equal to the last saved "
"preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3121
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system "
"values for the current option group"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3123
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system values for the current option group.\n"
"Click to reset all settings for current option group to the system values."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3126
msgid "WHITE BULLET icon indicates a non system preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3129
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3131
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3137
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3138
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system value.\n"
"Click to reset current value to the system value."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3144
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3145
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3257
msgid " as:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3301
msgid "the following postfix are not allowed:"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3305
msgid "The supplied name is not available."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3318
msgid "Material"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3320 src/slic3r/GUI/Tab.cpp:3411
msgid "Layers"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3324
msgid "Exposure"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3419
msgid "Support head"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3424
msgid "Support pillar"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3434
msgid "Connection of the support sticks and junctions"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3439
msgid "Automatic generation"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3501
msgid "Head penetration should not be greater than the head width."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3502
msgid "Invalid Head penetration"
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3514
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr ""

#: src/slic3r/GUI/Tab.cpp:3515
msgid "Invalid pinhead diameter"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:315 src/slic3r/GUI/Tab.hpp:403
msgid "Print Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:333
msgid "Filament Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:366
msgid "Printer Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:389
msgid "Material Settings"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:389
msgid "sla_material"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:403
msgid "sla_print"
msgstr ""

#: src/slic3r/GUI/Tab.hpp:415
msgid "Save preset"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:30
msgid "Update available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:30
#, possible-c-format
msgid "New version of %s is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:37
msgid "To download, follow the link below."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "Current version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:47
msgid "New version:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:55
msgid "Don't notify about new releases any more"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:73 src/slic3r/GUI/UpdateDialogs.cpp:168
msgid "Configuration update"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:73
msgid "Configuration update is available"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:76
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:112
#, possible-c-format
msgid "%s incompatibility"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:113
#, possible-c-format
msgid "%s configuration is incompatible"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:118
#, possible-c-format
msgid ""
"This version of %s is not compatible with currently installed configuration "
"bundles.\n"
"This probably happened as a result of running an older %s after using a "
"newer one.\n"
"\n"
"You may either exit %s and try again with a newer version, or you may re-run "
"the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this %s.\n"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:127
#, possible-c-format
msgid "This %s version: %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:132
msgid "Incompatible bundles:"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:148
#, possible-c-format
msgid "Exit %s"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:151
msgid "Re-configure"
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:172
#, possible-c-format
msgid ""
"%s now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: src/slic3r/GUI/UpdateDialogs.cpp:188
msgid "For more information please visit our wiki page:"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:14
msgid "Ramming customization"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:40
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:82
msgid "Total ramming time"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:84
msgid "Total rammed volume"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:88
msgid "Ramming line width"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:90
msgid "Ramming line spacing"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:141
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:225
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:226
msgid "Extruder changed to"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:234
msgid "unloaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:235
msgid "loaded"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:240
msgid "Tool #"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:247
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:248
msgid "Volume to purge (mm³) when the filament is being"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:262
msgid "From"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:327
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:339
msgid "Show simplified settings"
msgstr ""

#: src/slic3r/GUI/WipeTowerDialog.cpp:339
msgid "Show advanced settings"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:400
msgid "Instances"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:407 src/slic3r/GUI/wxExtensions.cpp:474
#, possible-c-format
msgid "Instance %d"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2462
#, possible-c-format
msgid "Switch to the %s mode"
msgstr ""

#: src/slic3r/GUI/wxExtensions.cpp:2463
#, possible-c-format
msgid "Current mode is %s"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:51
msgid "Connection to Duet works correctly."
msgstr ""

#: src/slic3r/Utils/Duet.cpp:56
msgid "Could not connect to Duet"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154
msgid "Unknown error occured"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:148
msgid "Wrong password"
msgstr ""

#: src/slic3r/Utils/Duet.cpp:151
msgid "Could not get resources to create a new connection"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:69
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:84
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:90
msgid "Could not connect to OctoPrint"
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:90
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:195
msgid "Connection to Prusa SL1 works correctly."
msgstr ""

#: src/slic3r/Utils/OctoPrint.cpp:200
msgid "Could not connect to Prusa SLA"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:583
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:588
#, possible-c-format
msgid "requires min. %s"
msgstr ""

#: src/slic3r/Utils/PresetUpdater.cpp:590
#, possible-c-format
msgid "requires max. %s"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model..."
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr ""

#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model repair failed: \n"
msgstr ""

#: src/libslic3r/Zipper.cpp:35
msgid "undefined error"
msgstr ""

#: src/libslic3r/Zipper.cpp:37
msgid "too many files"
msgstr ""

#: src/libslic3r/Zipper.cpp:39
msgid "file too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:41
msgid "unsupported method"
msgstr ""

#: src/libslic3r/Zipper.cpp:43
msgid "unsupported encryption"
msgstr ""

#: src/libslic3r/Zipper.cpp:45
msgid "unsupported feature"
msgstr ""

#: src/libslic3r/Zipper.cpp:47
msgid "failed finding central directory"
msgstr ""

#: src/libslic3r/Zipper.cpp:49
msgid "not a ZIP archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:51
msgid "invalid header or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:53
msgid "unsupported multidisk archive"
msgstr ""

#: src/libslic3r/Zipper.cpp:55
msgid "decompression failed or archive is corrupted"
msgstr ""

#: src/libslic3r/Zipper.cpp:57
msgid "compression failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:59
msgid "unexpected decompressed size"
msgstr ""

#: src/libslic3r/Zipper.cpp:61
msgid "CRC-32 check failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:63
msgid "unsupported central directory size"
msgstr ""

#: src/libslic3r/Zipper.cpp:65
msgid "allocation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:67
msgid "file open failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:69
msgid "file create failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:71
msgid "file write failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:73
msgid "file read failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:75
msgid "file close failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:77
msgid "file seek failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:79
msgid "file stat failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:81
msgid "invalid parameter"
msgstr ""

#: src/libslic3r/Zipper.cpp:83
msgid "invalid filename"
msgstr ""

#: src/libslic3r/Zipper.cpp:85
msgid "buffer too small"
msgstr ""

#: src/libslic3r/Zipper.cpp:87
msgid "internal error"
msgstr ""

#: src/libslic3r/Zipper.cpp:89
msgid "file not found"
msgstr ""

#: src/libslic3r/Zipper.cpp:91
msgid "archive is too large"
msgstr ""

#: src/libslic3r/Zipper.cpp:93
msgid "validation failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:95
msgid "write calledback failed"
msgstr ""

#: src/libslic3r/Zipper.cpp:105
msgid "Error with zip archive"
msgstr ""

#: src/libslic3r/Print.cpp:1135
msgid "All objects are outside of the print volume."
msgstr ""

#: src/libslic3r/Print.cpp:1162
msgid "Some objects are too close; your extruder will collide with them."
msgstr ""

#: src/libslic3r/Print.cpp:1177
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr ""

#: src/libslic3r/Print.cpp:1187
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr ""

#: src/libslic3r/Print.cpp:1189
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr ""

#: src/libslic3r/Print.cpp:1195
msgid ""
"All extruders must have the same diameter for single extruder multimaterial "
"printer."
msgstr ""

#: src/libslic3r/Print.cpp:1200
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr ""

#: src/libslic3r/Print.cpp:1202
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr ""

#: src/libslic3r/Print.cpp:1223
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heights"
msgstr ""

#: src/libslic3r/Print.cpp:1225
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr ""

#: src/libslic3r/Print.cpp:1227
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""

#: src/libslic3r/Print.cpp:1229
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr ""

#: src/libslic3r/Print.cpp:1258
msgid ""
"The Wipe tower is only supported if all objects have the same layer height "
"profile"
msgstr ""

#: src/libslic3r/Print.cpp:1268
msgid "The supplied settings will cause an empty print."
msgstr ""

#: src/libslic3r/Print.cpp:1285
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""

#: src/libslic3r/Print.cpp:1294
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""

#: src/libslic3r/Print.cpp:1302
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr ""

#: src/libslic3r/Print.cpp:1306
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""

#: src/libslic3r/Print.cpp:1313
msgid "first_layer_height"
msgstr ""

#: src/libslic3r/Print.cpp:1328
msgid "First layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1332
msgid "Layer height can't be greater than nozzle diameter"
msgstr ""

#: src/libslic3r/Print.cpp:1476
msgid "Infilling layers"
msgstr ""

#: src/libslic3r/Print.cpp:1484
msgid "Generating skirt"
msgstr ""

#: src/libslic3r/Print.cpp:1492
msgid "Generating brim"
msgstr ""

#: src/libslic3r/Print.cpp:1520
msgid "Exporting G-code"
msgstr ""

#: src/libslic3r/Print.cpp:1524
msgid "Generating G-code"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:57
msgid "Slicing model"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:58 src/libslic3r/SLAPrint.cpp:819
msgid "Generating support points"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:59
msgid "Generating support tree"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:60
msgid "Generating pad"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:61
msgid "Slicing supports"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:78
msgid "Merging slices and calculating statistics"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:79
msgid "Rasterizing layers"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:622
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:634
msgid "Elevation is too low for object."
msgstr ""

#. TRN To be shown at the status bar on SLA slicing error.
#: src/libslic3r/SLAPrint.cpp:719
msgid "Slicing had to be stopped due to an internal error."
msgstr ""

#: src/libslic3r/SLAPrint.cpp:867 src/libslic3r/SLAPrint.cpp:877
#: src/libslic3r/SLAPrint.cpp:925
msgid "Visualizing supports"
msgstr ""

#: src/libslic3r/SLAPrint.cpp:1463
msgid "Slicing done"
msgstr ""

#: src/libslic3r/PrintBase.cpp:65
msgid "Failed processing of the output_filename_format template."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
msgid "Printer technology"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:51
msgid "Bed shape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:58
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:65
msgid "Max print height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:66
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:72
msgid "Slice gap closing radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:74
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:82
msgid "Hostname, IP or URL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:83
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:89
msgid "API Key / Password"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:90
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:96
msgid "HTTPS CA File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:97
msgid ""
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
"in crt/pem format. If left blank, the default OS CA certificate repository "
"is used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:112
msgid "Avoid crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:113
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:120 src/libslic3r/PrintConfig.cpp:2002
msgid "Other layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:121
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:123
msgid "Bed temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:130
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:140
msgid "Between objects G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:141
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:152
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:153
msgid "Bottom solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:158
msgid "Bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:159
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:161 src/libslic3r/PrintConfig.cpp:304
#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:937
#: src/libslic3r/PrintConfig.cpp:1106 src/libslic3r/PrintConfig.cpp:1159
#: src/libslic3r/PrintConfig.cpp:1170 src/libslic3r/PrintConfig.cpp:1359
msgid "mm/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:167
msgid "Bridging angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:169
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:172 src/libslic3r/PrintConfig.cpp:734
#: src/libslic3r/PrintConfig.cpp:1595 src/libslic3r/PrintConfig.cpp:1605
#: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:1987
#: src/libslic3r/PrintConfig.cpp:2171 src/libslic3r/PrintConfig.cpp:2488
#: src/libslic3r/PrintConfig.cpp:2597
msgid "°"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:178
msgid "Bridges fan speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:179
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:746
#: src/libslic3r/PrintConfig.cpp:1179 src/libslic3r/PrintConfig.cpp:1242
#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:2285
#: src/libslic3r/PrintConfig.cpp:2527
msgid "%"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:187
msgid "Bridge flow ratio"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:189
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:199
msgid "Bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:201
msgid "Speed for printing bridges."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:578
#: src/libslic3r/PrintConfig.cpp:586 src/libslic3r/PrintConfig.cpp:595
#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:630
#: src/libslic3r/PrintConfig.cpp:649 src/libslic3r/PrintConfig.cpp:875
#: src/libslic3r/PrintConfig.cpp:1002 src/libslic3r/PrintConfig.cpp:1088
#: src/libslic3r/PrintConfig.cpp:1124 src/libslic3r/PrintConfig.cpp:1137
#: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1201
#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1388
#: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1571
#: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:2078
msgid "mm/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:209
msgid "Brim width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:210
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:217
msgid "Clip multi-part objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:218
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:225
msgid "Colorprint height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:226
msgid "Heights at which a filament change is to occur. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:236
msgid "Compatible printers condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:237
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:251
msgid "Compatible print profiles condition"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:252
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:269
msgid "Complete individual objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:270
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:278
msgid "Enable auto cooling"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:279
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:284
msgid "Cooling tube position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:285
msgid "Distance of the center-point of the cooling tube from the extruder tip "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:292
msgid "Cooling tube length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:293
msgid "Length of the cooling tube to limit space for cooling moves inside it "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:301
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:310
msgid "Default filament profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:311
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:317
msgid "Default print profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:318 src/libslic3r/PrintConfig.cpp:2366
#: src/libslic3r/PrintConfig.cpp:2377
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:324
msgid "Disable fan for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:325
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:327 src/libslic3r/PrintConfig.cpp:947
#: src/libslic3r/PrintConfig.cpp:1460 src/libslic3r/PrintConfig.cpp:1645
#: src/libslic3r/PrintConfig.cpp:1706 src/libslic3r/PrintConfig.cpp:1869
#: src/libslic3r/PrintConfig.cpp:1914
msgid "layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:334
msgid "Don't support bridges"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:336
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:342
msgid "Distance between copies"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:343
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:350
msgid "Elephant foot compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:352
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:361
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all Slic3r settings."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:371
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode. Note that you can use placeholder variables for all "
"Slic3r settings. If you have multiple extruders, the gcode is processed in "
"extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:381
msgid "Ensure vertical shell thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:383
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:389
msgid "Top fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:391
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:797
#: src/libslic3r/PrintConfig.cpp:1947
msgid "Rectilinear"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:803
msgid "Concentric"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807
msgid "Hilbert Curve"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:808
msgid "Archimedean Chords"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:809
msgid "Octagram Spiral"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:410
msgid "Bottom fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:411
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:416 src/libslic3r/PrintConfig.cpp:426
msgid "External perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:418
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:421 src/libslic3r/PrintConfig.cpp:836
#: src/libslic3r/PrintConfig.cpp:968 src/libslic3r/PrintConfig.cpp:1379
#: src/libslic3r/PrintConfig.cpp:1717 src/libslic3r/PrintConfig.cpp:1890
#: src/libslic3r/PrintConfig.cpp:2048
msgid "mm or % (leave 0 for default)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:428
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:431 src/libslic3r/PrintConfig.cpp:857
#: src/libslic3r/PrintConfig.cpp:1676 src/libslic3r/PrintConfig.cpp:1727
#: src/libslic3r/PrintConfig.cpp:1933 src/libslic3r/PrintConfig.cpp:2060
msgid "mm/s or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:438
msgid "External perimeters first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:440
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:446
msgid "Extra perimeters if needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:448
#, possible-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:458
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:470
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:480
msgid "Radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:481
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:491
msgid "Extruder Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:492 src/libslic3r/PrintConfig.cpp:552
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:498
msgid "Extruder offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:499
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:508
msgid "Extrusion axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:509
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:514
msgid "Extrusion multiplier"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:515
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:523
msgid "Default extrusion width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:525
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:529
msgid "mm or % (leave 0 for auto)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:534
msgid "Keep fan always on"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:535
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:540
msgid "Enable fan if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:541
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:543 src/libslic3r/PrintConfig.cpp:1663
msgid "approximate seconds"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:551
msgid "Color"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:557
msgid "Filament notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:558
msgid "You can put your notes regarding the filament here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:1207
msgid "Max volumetric speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:567
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:570 src/libslic3r/PrintConfig.cpp:1210
msgid "mm³/s"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:576
msgid "Loading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:577
msgid "Speed used for loading the filament on the wipe tower. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:584
msgid "Loading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:585
msgid "Speed used at the very beginning of loading phase. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:592
msgid "Unloading speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:593
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming). "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:601
msgid "Unloading speed at the start"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:602
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:609
msgid "Delay after unloading"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:610
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:619
msgid "Number of cooling moves"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:620
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:628
msgid "Speed of the first cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:629
msgid "Cooling moves are gradually accelerating beginning at this speed. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:636
msgid "Minimal purge on wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:637
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:641
msgid "mm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:647
msgid "Speed of the last cooling move"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:648
msgid "Cooling moves are gradually accelerating towards this speed. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:655
msgid "Filament load time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:656
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:663
msgid "Ramming parameters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:664
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:670
msgid "Filament unload time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:671
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:679
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:686
msgid "Density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:687
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:690
msgid "g/cm³"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:695
msgid "Filament type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:696
msgid "The filament material type for use in custom G-codes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:712
msgid "Soluble material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:713
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:719
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:720
msgid "money/kg"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:729
msgid "Fill angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:731
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:743
msgid "Fill density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:745
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:780
msgid "Fill pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:782
msgid "Fill pattern for general low-density infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:798
msgid "Grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:799
msgid "Triangles"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:800
msgid "Stars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:801
msgid "Cubic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:802
msgid "Line"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:1949
msgid "Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:805
msgid "3D Honeycomb"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:806
msgid "Gyroid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:822
#: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:863
msgid "First layer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:814
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:823
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:832
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:842
msgid "First layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:844
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:848 src/libslic3r/PrintConfig.cpp:993
#: src/libslic3r/PrintConfig.cpp:1822
msgid "mm or %"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:853
msgid "First layer speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:854
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:864
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:873
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:881
msgid "Verbose G-code"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:882
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:889
msgid "G-code flavor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:890
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
"extrusion value at all."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:913
msgid "No extrusion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:918
msgid "Label objects"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:919
msgid ""
"Enable this to add comments into the G-Code labeling print moves with what "
"object they belong to, which is useful for the Octoprint CancelObject "
"plugin. This settings is NOT compatible with Single Extruder Multi Material "
"setup and Wipe into Object / Wipe into Infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:926
msgid "High extruder current on filament swap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:927
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:935
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:943
msgid "Combine infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:945
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:948
msgid "Combine infill every n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:954
msgid "Infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:956
msgid "The extruder to use when printing infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:964
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:973
msgid "Infill before perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:974
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:979
msgid "Only infill where needed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:981
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:988
msgid "Infill/perimeters overlap"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:990
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1001
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1009
msgid "Inherits profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1010
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1023
msgid "Interface shells"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1024
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1033
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1044
msgid "Supports remaining times"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1045
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1053
msgid "Supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1054
msgid "The firmware supports stealth mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1078
msgid "Maximum feedrate X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1079
msgid "Maximum feedrate Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1080
msgid "Maximum feedrate Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1081
msgid "Maximum feedrate E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1084
msgid "Maximum feedrate of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1085
msgid "Maximum feedrate of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1086
msgid "Maximum feedrate of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1087
msgid "Maximum feedrate of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1096
msgid "Maximum acceleration X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1097
msgid "Maximum acceleration Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1098
msgid "Maximum acceleration Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1099
msgid "Maximum acceleration E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1102
msgid "Maximum acceleration of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1103
msgid "Maximum acceleration of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1104
msgid "Maximum acceleration of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1105
msgid "Maximum acceleration of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1114
msgid "Maximum jerk X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1115
msgid "Maximum jerk Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1116
msgid "Maximum jerk Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1117
msgid "Maximum jerk E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1120
msgid "Maximum jerk of the X axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1121
msgid "Maximum jerk of the Y axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1122
msgid "Maximum jerk of the Z axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1123
msgid "Maximum jerk of the E axis"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1134
msgid "Minimum feedrate when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1136
msgid "Minimum feedrate when extruding (M205 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1145
msgid "Minimum travel feedrate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1147
msgid "Minimum travel feedrate (M205 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1156
msgid "Maximum acceleration when extruding"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1158
msgid "Maximum acceleration when extruding (M204 S)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1167
msgid "Maximum acceleration when retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1169
msgid "Maximum acceleration when retracting (M204 T)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1177 src/libslic3r/PrintConfig.cpp:1186
msgid "Max"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1178
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1187
#, possible-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1197
msgid "Max print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1198
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1208
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1217
msgid "Max volumetric slope positive"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1218 src/libslic3r/PrintConfig.cpp:1229
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1222 src/libslic3r/PrintConfig.cpp:1233
msgid "mm³/s²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1228
msgid "Max volumetric slope negative"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1240 src/libslic3r/PrintConfig.cpp:1249
msgid "Min"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1241
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1250
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1258
msgid "Min print speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1259
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1266
msgid "Minimal filament extrusion length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1267
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1276
msgid "Configuration notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1277
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1286
msgid "Nozzle diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1287
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1292
msgid "Host Type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1293
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1304
msgid "Only retract when crossing perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1305
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1312
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1319
msgid "Output filename format"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1320
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1329
msgid "Detect bridging perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1331
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1337
msgid "Filament parking position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1338
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1346
msgid "Extra loading distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1347
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1355 src/libslic3r/PrintConfig.cpp:1373
#: src/libslic3r/PrintConfig.cpp:1385 src/libslic3r/PrintConfig.cpp:1395
msgid "Perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1356
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1364
msgid "Perimeter extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1366
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1375
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1387
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1397
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1401
msgid "(minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1409
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1421
msgid "Printer type"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1422
msgid "Type of the printer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1427
msgid "Printer notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1428
msgid "You can put your notes regarding the printer here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1436
msgid "Printer vendor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1437
msgid "Name of the printer vendor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1442
msgid "Printer variant"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1443
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1456
msgid "Raft layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1458
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1466
msgid "Resolution"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1467
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1477
msgid "Minimum travel after retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1478
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1484
msgid "Retract amount before wipe"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1485
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1492
msgid "Retract on layer change"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1493
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1498 src/libslic3r/PrintConfig.cpp:1506
msgid "Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1499
msgid "Retraction Length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1500
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1511
msgid "mm (zero to disable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1507
msgid "Retraction Length (Toolchange)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1508
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1516
msgid "Lift Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1517
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1524
msgid "Above Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1525
msgid "Only lift Z above"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1526
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1533
msgid "Below Z"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1534
msgid "Only lift Z below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1535
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551
msgid "Extra length on restart"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1544
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1552
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1559 src/libslic3r/PrintConfig.cpp:1560
msgid "Retraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1561
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1568
msgid "Deretraction Speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1569
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1576
msgid "Seam position"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1578
msgid "Position of perimeters starting points."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1584
msgid "Random"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1585
msgid "Nearest"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1586
msgid "Aligned"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1594
msgid "Direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1596
msgid "Preferred direction of the seam"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1597
msgid "Seam preferred direction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1604
msgid "Jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1606
msgid "Seam preferred direction jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1607
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1617
msgid "USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1624
msgid "Serial port speed"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1625
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1634
msgid "Distance from object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1635
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1642
msgid "Skirt height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1643
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1650
msgid "Loops (minimum)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1651
msgid "Skirt Loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1652
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1660
msgid "Slow down if layer print time is below"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1661
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1671
msgid "Small perimeters"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1673
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1683
msgid "Solid infill threshold area"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1685
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1686
msgid "mm²"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1692
msgid "Solid infill extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1694
msgid "The extruder to use when printing solid infill."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1700
msgid "Solid infill every"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1702
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1714
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1724
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1736
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1742
msgid "Spiral vase"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1743
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1751
msgid "Temperature variation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1752
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1762
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
"such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all Slic3r settings, so you can put a "
"\"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1777
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode. This is used to override settings for a specific filament. If Slic3r "
"detects M104, M109, M140 or M190 in your custom codes, such commands will "
"not be prepended automatically so you're free to customize the order of "
"heating commands and other custom actions. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1792
msgid "Single Extruder Multi Material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1793
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1798
msgid "Prime all printing extruders"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1799
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1804
msgid "Generate support material"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1806
msgid "Enable support material generation."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1810
msgid "Auto generated supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1812
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1818
msgid "XY separation between an object and its support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1820
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1830
msgid "Pattern angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1832
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:2450
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1848
msgid "Contact Z distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1850
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1857
msgid "0 (soluble)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1858
msgid "0.2 (detachable)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1863
msgid "Enforce support for the first"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1865
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1870
msgid "Enforce support for the first n layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1876
msgid "Support material/raft/skirt extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1878
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1887
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1895
msgid "Interface loops"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1897
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1902
msgid "Support material/raft interface extruder"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1904
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1911
msgid "Interface layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1913
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1920
msgid "Interface pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1922
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1931
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1940
msgid "Pattern"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1942
msgid "Pattern used to generate support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1948
msgid "Rectilinear grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1954
msgid "Pattern spacing"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1956
msgid "Spacing between support material lines."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1965
msgid "Speed for printing support material."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1972
msgid "Synchronize with object layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1974
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1980
msgid "Overhang threshold"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1982
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1994
msgid "With sheath around the support"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:1996
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2003
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2005
msgid "Temperature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2011
msgid "Detect thin walls"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2013
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2019
msgid "Threads"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2020
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2032
msgid ""
"This custom code is inserted right before every extruder change. Note that "
"you can use placeholder variables for all Slic3r settings as well as "
"[previous_extruder] and [next_extruder]."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2044
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2055
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2070
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2071
msgid "Top solid layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2077
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2085
msgid "Use firmware retraction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2086
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2092
msgid "Use relative E distances"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2093
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2099
msgid "Use volumetric E"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2100
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2110
msgid "Enable variable layer height feature"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2111
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2117
msgid "Wipe while retracting"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2118
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2125
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2131
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2132
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2138
msgid "Purging volumes - matrix"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2139
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2148
msgid "Position X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2149
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2155
msgid "Position Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2156
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2163
msgid "Width of a wipe tower"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2169
msgid "Wipe tower rotation angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2170
msgid "Wipe tower rotation angle with respect to x-axis "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2177
msgid "Wipe into this object's infill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2178
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2185
msgid "Wipe into this object"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2186
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2192
msgid "Maximal bridging distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2193
msgid "Maximal distance between supports on sparse infill sections. "
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2199
msgid "XY Size Compensation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2201
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2209
msgid "Z offset"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2210
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2227
msgid "Display width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2228
msgid "Width of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2233
msgid "Display height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2234
msgid "Height of the display"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2239
msgid "Number of pixels in"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2241
msgid "Number of pixels in X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2247
msgid "Number of pixels in Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2252
msgid "Display orientation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2253
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2259
msgid "Landscape"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2260
msgid "Portrait"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2265
msgid "Fast"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2266
msgid "Fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2267
msgid "Time of the fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2274
msgid "Slow"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2275
msgid "Slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2276
msgid "Time of the slow tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2283
msgid "Area fill"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2284
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292
#: src/libslic3r/PrintConfig.cpp:2293
msgid "Printer scaling correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2299 src/libslic3r/PrintConfig.cpp:2300
msgid "Printer absolute correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2301
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2307 src/libslic3r/PrintConfig.cpp:2308
msgid "Printer gamma correction"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2309
msgid ""
"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
"value of zero means thresholding with the threshold in the middle. This "
"behaviour eliminates antialiasing without losing holes in polygons."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321
msgid "Initial layer height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2327
msgid "Faded layers"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2328
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2336
msgid "Exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2342 src/libslic3r/PrintConfig.cpp:2343
msgid "Initial exposure time"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2349 src/libslic3r/PrintConfig.cpp:2350
msgid "Correction for expansion"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2356
msgid "SLA print material notes"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2357
msgid "You can put your notes regarding the SLA print material here."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2365 src/libslic3r/PrintConfig.cpp:2376
msgid "Default SLA material profile"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2387
msgid "Generate supports"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2389
msgid "Generate supports for the models"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2394
msgid "Support head front diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2396
msgid "Diameter of the pointing side of the head"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2403
msgid "Support head penetration"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2405
msgid "How much the pinhead has to penetrate the model surface"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2412
msgid "Support head width"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2414
msgid "Width from the back sphere center to the front sphere center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2422
msgid "Support pillar diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2424
msgid "Diameter in mm of the support pillars"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2432
msgid "Support pillar connection mode"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2433
msgid ""
"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2441
msgid "Zig-Zag"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2442
msgid "Cross"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2443
msgid "Dynamic"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2455
msgid "Pillar widening factor"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2457
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2466
msgid "Support base diameter"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2468
msgid "Diameter in mm of the pillar base"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2476
msgid "Support base height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2478
msgid "The height of the pillar base cone"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2485
msgid "Critical angle"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2487
msgid "The default angle for connecting support sticks and junctions."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2495
msgid "Max bridge length"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2497
msgid "The max length of a bridge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2504
msgid "Max pillar linking distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2506
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2514
msgid "Object elevation"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2516
msgid "How much the supports should lift up the supported object."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2524
msgid "Support points density"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2526
msgid "This is a relative measure of support points density."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2532
msgid "Minimal distance of the support points"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2534
msgid "No support points will be placed closer than this threshold."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2540
msgid "Use pad"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2542
msgid "Add a pad underneath the supported model"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2547
msgid "Pad wall thickness"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2549
msgid "The thickness of the pad and its optional cavity walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2557
msgid "Pad wall height"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2558
msgid ""
"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
"when enabling this feature, as some resins may produce an extreme suction "
"effect inside the cavity, which makes peeling the print off the vat foil "
"difficult."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2571
msgid "Max merge distance"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2573
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2584
msgid "Pad edge radius"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2593
msgid "Pad wall slope"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2595
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2957
msgid "Export OBJ"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2958
msgid "Export the model(s) as OBJ."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2969
msgid "Export SLA"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2970
msgid "Slice the model and export SLA printing layers as PNG."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2975
msgid "Export 3MF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2976
msgid "Export the model(s) as 3MF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2980
msgid "Export AMF"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2981
msgid "Export the model(s) as AMF."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2985
msgid "Export STL"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2986
msgid "Export the model(s) as STL."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2991
msgid "Slice the model and export toolpaths as G-code."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2996
msgid "Slice"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:2997
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3002
msgid "Help"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3003
msgid "Show this help."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3008
msgid "Help (FFF options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3009
msgid "Show the full list of print/G-code configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3013
msgid "Help (SLA options)"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3014
msgid "Show the full list of SLA print configuration options."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3018
msgid "Output Model Info"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3019
msgid "Write information about the model to the console."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3023
msgid "Save config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3024
msgid "Save configuration to the specified file."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3034
msgid "Align XY"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3035
msgid "Align the model to the given point."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3040
msgid "Cut model at the given Z."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3061
msgid "Center"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3062
msgid "Center the print around the given center."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3066
msgid "Don't arrange"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3067
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3070
msgid "Duplicate"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3071
msgid "Multiply copies by this factor."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3075
msgid "Duplicate by grid"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3076
msgid "Multiply copies by creating a grid."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3079
msgid "Merge"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3080
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3085
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3089
msgid "Rotation angle around the Z axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3093
msgid "Rotate around X"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3094
msgid "Rotation angle around the X axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3098
msgid "Rotate around Y"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3099
msgid "Rotation angle around the Y axis in degrees."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3104
msgid "Scaling factor or percentage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3109
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3112
msgid "Scale to Fit"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3113
msgid "Scale to fit the given volume."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3122
msgid "Ignore non-existent config files"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3123
msgid "Do not fail if a file supplied to --load does not exist."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3126
msgid "Load config file"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3127
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3130
msgid "Output File"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3131
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3141
msgid "Data directory"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3142
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3145
msgid "Logging level"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3146
msgid ""
"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3151
msgid "Render with a software renderer"
msgstr ""

#: src/libslic3r/PrintConfig.cpp:3152
msgid ""
"Render with a software renderer. The bundled MESA software renderer is "
"loaded instead of the default OpenGL driver."
msgstr ""

#: src/libslic3r/PrintObject.cpp:110
msgid "Processing triangulated mesh"
msgstr ""

#: src/libslic3r/PrintObject.cpp:141
msgid "Generating perimeters"
msgstr ""

#: src/libslic3r/PrintObject.cpp:251
msgid "Preparing infill"
msgstr ""

#: src/libslic3r/PrintObject.cpp:391
msgid "Generating support material"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:176
msgid "Mixed"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:396
msgid "Height (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:398
msgid "Width (mm)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:400
msgid "Speed (mm/s)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:402
msgid "Volumetric flow rate (mm3/s)"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:491
msgid "Default print color"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:495
#, possible-c-format
msgid "up to %.2f mm"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:499
#, possible-c-format
msgid "above %.2f mm"
msgstr ""

#: src/libslic3r/GCode/PreviewData.cpp:504
#, possible-c-format
msgid "%.2f - %.2f mm"
msgstr ""