PrusaSlicer-NonPlainar/t/arcs.t

123 lines
5.0 KiB
Perl

use Test::More;
use strict;
use warnings;
plan tests => 24;
BEGIN {
use FindBin;
use lib "$FindBin::Bin/../lib";
}
use Slic3r;
use Slic3r::ExtrusionPath ':roles';
use Slic3r::Geometry qw(scaled_epsilon epsilon scale unscale X Y deg2rad);
{
my $angle = deg2rad(4);
foreach my $ccw (1, 0) {
my $polyline = Slic3r::Polyline->new_scale([0,0], [0,10]);
{
my $p3 = Slic3r::Point->new_scale(0, 20);
$p3->rotate($angle * ($ccw ? 1 : -1), $polyline->[-1]);
is $ccw, ($p3->[X] < $polyline->[-1][X]) ? 1 : 0, 'third point is rotated correctly';
$polyline->append($p3);
}
ok abs($polyline->length - scale(20)) < scaled_epsilon, 'curved polyline length';
is $ccw, ($polyline->[2]->ccw(@$polyline[0,1]) > 0) ? 1 : 0, 'curved polyline has wanted orientation';
ok my $arc = Slic3r::GCode::ArcFitting::polyline_to_arc($polyline), 'arc is detected';
is $ccw, $arc->is_ccw, 'arc orientation is correct';
ok abs($arc->angle - $angle) < epsilon, 'arc relative angle is correct';
ok $arc->start->coincides_with($polyline->[0]), 'arc start point is correct';
ok $arc->end->coincides_with($polyline->[-1]), 'arc end point is correct';
# since first polyline segment is vertical we expect arc center to have same Y as its first point
is $arc->center->[Y], 0, 'arc center has correct Y';
my $s1 = Slic3r::Line->new(@$polyline[0,1]);
my $s2 = Slic3r::Line->new(@$polyline[1,2]);
ok abs($arc->center->distance_to($s1->midpoint) - $arc->center->distance_to($s2->midpoint)) < scaled_epsilon,
'arc center is equidistant from both segments\' midpoints';
}
}
#==========================================================
{
my $path = Slic3r::Polyline->new_scale(
[13.532242,2.665496], [18.702911,9.954623], [22.251514,9.238193], [25.800116,9.954623],
[28.697942,11.908391], [30.65171,14.806217], [31.36814,18.35482],
[30.65171,21.903423], [28.697942,24.801249], [25.800116,26.755017], [22.251514,27.471447],
[18.702911,26.755017], [15.805085,24.801249], [13.851317,21.903423], [13.134887,18.35482],
[86948.77,175149.09], [119825.35,100585],
);
if (0) {
require "Slic3r::SVG";
Slic3r::SVG::output(
"arc.svg",
polylines => [$path],
);
}
my $af = Slic3r::GCode::ArcFitting->new(max_relative_angle => deg2rad(30));
my @chunks = $af->detect_arcs($path);
is scalar(@chunks), 3, 'path collection now contains three paths';
isa_ok $chunks[0], 'Slic3r::Polyline', 'first one is polyline';
isa_ok $chunks[1], 'Slic3r::GCode::ArcFitting::Arc', 'second one is arc';
isa_ok $chunks[2], 'Slic3r::Polyline', 'third one is polyline';
}
exit;
#==========================================================
{
my @points = map [ scale $_->[0], scale $_->[1] ], (
[10,20], [10.7845909572784,19.9691733373313], [11.5643446504023,19.8768834059514],
[12.3344536385591,19.7236992039768], [13.0901699437495,19.5105651629515],
[13.8268343236509,19.2387953251129], [14.5399049973955,18.9100652418837],
[15.2249856471595,18.5264016435409], [15.8778525229247,18.0901699437495],
[16.4944804833018,17.6040596560003]
);
my $path1 = Slic3r::ExtrusionPath->new(
polyline => Slic3r::Polyline->new(@points),
role => EXTR_ROLE_FILL,
mm3_per_mm => 0.5,
);
my $path2 = Slic3r::ExtrusionPath->new(
polyline => Slic3r::Polyline->new(reverse @points),
role => EXTR_ROLE_FILL,
mm3_per_mm => 0.5,
);
my @paths1 = $path1->detect_arcs(10, scale 1);
my @paths2 = $path2->detect_arcs(10, scale 1);
is scalar(@paths1), 1, 'path collection now contains one path';
is scalar(@paths2), 1, 'path collection now contains one path';
isa_ok $paths1[0], 'Slic3r::ExtrusionPath::Arc', 'path';
isa_ok $paths2[0], 'Slic3r::ExtrusionPath::Arc', 'path';
my $expected_length = scale 7.06858347057701;
ok abs($paths1[0]->length - $expected_length) < scaled_epsilon, 'cw oriented arc has correct length';
ok abs($paths2[0]->length - $expected_length) < scaled_epsilon, 'ccw oriented arc has correct length';
is $paths1[0]->orientation, 'cw', 'cw orientation was correctly detected';
is $paths2[0]->orientation, 'ccw', 'ccw orientation was correctly detected';
is $paths1[0]->flow_spacing, $path1->flow_spacing, 'flow spacing was correctly preserved';
my $center1 = [ map sprintf('%.0f', $_), @{ $paths1[0]->center } ];
ok abs($center1->[X] - scale 10) < scaled_epsilon && abs($center1->[Y] - scale 10) < scaled_epsilon, 'center was correctly detected';
my $center2 = [ map sprintf('%.0f', $_), @{ $paths2[0]->center } ];
ok abs($center2->[X] - scale 10) < scaled_epsilon && abs($center1->[Y] - scale 10) < scaled_epsilon, 'center was correctly detected';
}
#==========================================================