540 lines
21 KiB
Perl
540 lines
21 KiB
Perl
package Slic3r::Print;
|
|
use Moo;
|
|
|
|
use Math::ConvexHull 1.0.4 qw(convex_hull);
|
|
use Slic3r::Geometry qw(X Y Z PI MIN MAX scale);
|
|
use Slic3r::Geometry::Clipper qw(explode_expolygons safety_offset diff_ex intersection_ex
|
|
union_ex offset JT_ROUND JT_MITER);
|
|
use XXX;
|
|
|
|
has 'x_length' => (
|
|
is => 'ro',
|
|
required => 1,
|
|
);
|
|
|
|
has 'y_length' => (
|
|
is => 'ro',
|
|
required => 1,
|
|
);
|
|
|
|
has 'layers' => (
|
|
traits => ['Array'],
|
|
is => 'rw',
|
|
#isa => 'ArrayRef[Slic3r::Layer]',
|
|
default => sub { [] },
|
|
);
|
|
|
|
has 'total_extrusion_length' => (is => 'rw');
|
|
|
|
sub new_from_mesh {
|
|
my $class = shift;
|
|
my ($mesh) = @_;
|
|
|
|
$mesh->rotate($Slic3r::rotate);
|
|
$mesh->scale($Slic3r::scale / $Slic3r::resolution);
|
|
|
|
# calculate the displacements needed to
|
|
# have lowest value for each axis at coordinate 0
|
|
{
|
|
my @extents = $mesh->bounding_box;
|
|
my @shift = map -$extents[$_][MIN], X,Y,Z;
|
|
$mesh->move(@shift);
|
|
}
|
|
|
|
# duplicate object
|
|
{
|
|
my @size = $mesh->size;
|
|
my @duplicate_offset = map +($size[$_] + scale $Slic3r::duplicate_distance), (X,Y);
|
|
$mesh->duplicate(map [$duplicate_offset[X] * ($_-1), 0], 2..$Slic3r::duplicate_x);
|
|
$mesh->duplicate(map [0, $duplicate_offset[Y] * ($_-1)], 2..$Slic3r::duplicate_y);
|
|
}
|
|
|
|
# initialize print job
|
|
my @size = $mesh->size;
|
|
my $print = $class->new(
|
|
x_length => $size[X],
|
|
y_length => $size[Y],
|
|
);
|
|
|
|
$mesh->make_edge_table;
|
|
|
|
# process facets
|
|
for (my $i = 0; $i <= $#{$mesh->facets}; $i++) {
|
|
my $facet = $mesh->facets->[$i];
|
|
|
|
# transform vertex coordinates
|
|
my ($normal, @vertices) = @$facet;
|
|
$mesh->_facet($print, $i, $normal, @vertices);
|
|
}
|
|
|
|
die "Invalid input file\n" if !@{$print->layers};
|
|
|
|
# remove last layer if empty
|
|
# (we might have created it because of the $max_layer = ... + 1 code below)
|
|
pop @{$print->layers} if !@{$print->layers->[-1]->surfaces} && !@{$print->layers->[-1]->lines};
|
|
|
|
print "\n==> PROCESSING SLICES:\n";
|
|
foreach my $layer (@{ $print->layers }) {
|
|
printf "Making surfaces for layer %d:\n", $layer->id;
|
|
|
|
# layer currently has many lines representing intersections of
|
|
# model facets with the layer plane. there may also be lines
|
|
# that we need to ignore (for example, when two non-horizontal
|
|
# facets share a common edge on our plane, we get a single line;
|
|
# however that line has no meaning for our layer as it's enclosed
|
|
# inside a closed polyline)
|
|
|
|
# build surfaces from sparse lines
|
|
$layer->make_surfaces($mesh->make_loops($layer));
|
|
|
|
# free memory
|
|
$layer->lines(undef);
|
|
}
|
|
|
|
# detect slicing errors
|
|
my $warning_thrown = 0;
|
|
for (my $i = 0; $i <= $#{$print->layers}; $i++) {
|
|
my $layer = $print->layers->[$i];
|
|
next unless $layer->slicing_errors;
|
|
if (!$warning_thrown) {
|
|
warn "The model has overlapping or self-intersecting facets. I tried to repair it, "
|
|
. "however you might want to check the results or repair the input file and retry.\n";
|
|
$warning_thrown = 1;
|
|
}
|
|
|
|
# try to repair the layer surfaces by merging all contours and all holes from
|
|
# neighbor layers
|
|
Slic3r::debugf "Attempting to repair layer %d\n", $i;
|
|
|
|
my (@upper_surfaces, @lower_surfaces);
|
|
for (my $j = $i+1; $j <= $#{$print->layers}; $j++) {
|
|
if (!$print->layers->[$j]->slicing_errors) {
|
|
@upper_surfaces = @{$print->layers->[$j]->slices};
|
|
last;
|
|
}
|
|
}
|
|
for (my $j = $i-1; $j >= 0; $j--) {
|
|
if (!$print->layers->[$j]->slicing_errors) {
|
|
@lower_surfaces = @{$print->layers->[$j]->slices};
|
|
last;
|
|
}
|
|
}
|
|
|
|
my $union = union_ex([
|
|
map $_->expolygon->contour, @upper_surfaces, @lower_surfaces,
|
|
]);
|
|
my $diff = diff_ex(
|
|
[ map @$_, @$union ],
|
|
[ map $_->expolygon->holes, @upper_surfaces, @lower_surfaces, ],
|
|
);
|
|
|
|
@{$layer->slices} = map Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => 'internal'),
|
|
@$diff;
|
|
}
|
|
|
|
# remove empty layers from bottom
|
|
while (@{$print->layers} && !@{$print->layers->[0]->slices} && !@{$print->layers->[0]->thin_walls}) {
|
|
shift @{$print->layers};
|
|
for (my $i = 0; $i <= $#{$print->layers}; $i++) {
|
|
$print->layers->[$i]->id($i);
|
|
}
|
|
}
|
|
|
|
warn "No layers were detected. You might want to repair your STL file and retry.\n"
|
|
if !@{$print->layers};
|
|
|
|
return $print;
|
|
}
|
|
|
|
sub layer_count {
|
|
my $self = shift;
|
|
return scalar @{ $self->layers };
|
|
}
|
|
|
|
sub max_length {
|
|
my $self = shift;
|
|
return ($self->x_length > $self->y_length) ? $self->x_length : $self->y_length;
|
|
}
|
|
|
|
sub layer {
|
|
my $self = shift;
|
|
my ($layer_id) = @_;
|
|
|
|
# extend our print by creating all necessary layers
|
|
|
|
if ($self->layer_count < $layer_id + 1) {
|
|
for (my $i = $self->layer_count; $i <= $layer_id; $i++) {
|
|
push @{ $self->layers }, Slic3r::Layer->new(id => $i);
|
|
}
|
|
}
|
|
|
|
return $self->layers->[$layer_id];
|
|
}
|
|
|
|
sub detect_surfaces_type {
|
|
my $self = shift;
|
|
Slic3r::debugf "Detecting solid surfaces...\n";
|
|
|
|
# prepare a reusable subroutine to make surface differences
|
|
my $surface_difference = sub {
|
|
my ($subject_surfaces, $clip_surfaces, $result_type) = @_;
|
|
my $expolygons = diff_ex(
|
|
[ map { ref $_ eq 'ARRAY' ? $_ : ref $_ eq 'Slic3r::ExPolygon' ? @$_ : $_->p } @$subject_surfaces ],
|
|
[ map { ref $_ eq 'ARRAY' ? $_ : ref $_ eq 'Slic3r::ExPolygon' ? @$_ : $_->p } @$clip_surfaces ],
|
|
1,
|
|
);
|
|
return grep $_->contour->is_printable,
|
|
map Slic3r::Surface->new(expolygon => $_, surface_type => $result_type),
|
|
@$expolygons;
|
|
};
|
|
|
|
for (my $i = 0; $i < $self->layer_count; $i++) {
|
|
my $layer = $self->layers->[$i];
|
|
my $upper_layer = $self->layers->[$i+1];
|
|
my $lower_layer = $i > 0 ? $self->layers->[$i-1] : undef;
|
|
|
|
my (@bottom, @top, @internal) = ();
|
|
|
|
# find top surfaces (difference between current surfaces
|
|
# of current layer and upper one)
|
|
if ($upper_layer) {
|
|
@top = $surface_difference->($layer->slices, $upper_layer->slices, 'top');
|
|
} else {
|
|
# if no upper layer, all surfaces of this one are solid
|
|
@top = @{$layer->slices};
|
|
$_->surface_type('top') for @top;
|
|
}
|
|
|
|
# find bottom surfaces (difference between current surfaces
|
|
# of current layer and lower one)
|
|
if ($lower_layer) {
|
|
@bottom = $surface_difference->($layer->slices, $lower_layer->slices, 'bottom');
|
|
} else {
|
|
# if no lower layer, all surfaces of this one are solid
|
|
@bottom = @{$layer->slices};
|
|
$_->surface_type('bottom') for @bottom;
|
|
}
|
|
|
|
# now, if the object contained a thin membrane, we could have overlapping bottom
|
|
# and top surfaces; let's do an intersection to discover them and consider them
|
|
# as bottom surfaces (to allow for bridge detection)
|
|
if (@top && @bottom) {
|
|
my $overlapping = intersection_ex([ map $_->p, @top ], [ map $_->p, @bottom ]);
|
|
Slic3r::debugf " layer %d contains %d membrane(s)\n", $layer->id, scalar(@$overlapping);
|
|
@top = $surface_difference->([@top], $overlapping, 'top');
|
|
}
|
|
|
|
# find internal surfaces (difference between top/bottom surfaces and others)
|
|
@internal = $surface_difference->($layer->slices, [@top, @bottom], 'internal');
|
|
|
|
# save surfaces to layer
|
|
@{$layer->slices} = (@bottom, @top, @internal);
|
|
|
|
Slic3r::debugf " layer %d (%d sliced expolygons) has %d bottom, %d top and %d internal surfaces\n",
|
|
$layer->id, scalar(@{$layer->slices}), scalar(@bottom), scalar(@top), scalar(@internal);
|
|
}
|
|
|
|
# clip surfaces to the fill boundaries
|
|
foreach my $layer (@{$self->layers}) {
|
|
@{$layer->surfaces} = ();
|
|
foreach my $surface (@{$layer->slices}) {
|
|
my $intersection = intersection_ex(
|
|
[ $surface->p ],
|
|
[ map @$_, @{$layer->fill_boundaries} ],
|
|
);
|
|
push @{$layer->surfaces}, map Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => $surface->surface_type),
|
|
@$intersection;
|
|
}
|
|
|
|
# free memory
|
|
@{$layer->fill_boundaries} = ();
|
|
}
|
|
|
|
}
|
|
|
|
sub discover_horizontal_shells {
|
|
my $self = shift;
|
|
|
|
Slic3r::debugf "==> DISCOVERING HORIZONTAL SHELLS\n";
|
|
|
|
for (my $i = 0; $i < $self->layer_count; $i++) {
|
|
my $layer = $self->layers->[$i];
|
|
foreach my $type (qw(top bottom)) {
|
|
# find surfaces of current type for current layer
|
|
# and offset them to take perimeters into account
|
|
my @surfaces = map $_->offset($Slic3r::perimeters * scale $Slic3r::flow_width),
|
|
grep $_->surface_type eq $type, @{$layer->fill_surfaces} or next;
|
|
my $surfaces_p = [ map $_->p, @surfaces ];
|
|
Slic3r::debugf "Layer %d has %d surfaces of type '%s'\n",
|
|
$i, scalar(@surfaces), $type;
|
|
|
|
for (my $n = $type eq 'top' ? $i-1 : $i+1;
|
|
abs($n - $i) <= $Slic3r::solid_layers-1;
|
|
$type eq 'top' ? $n-- : $n++) {
|
|
|
|
next if $n < 0 || $n >= $self->layer_count;
|
|
Slic3r::debugf " looking for neighbors on layer %d...\n", $n;
|
|
|
|
my @neighbor_surfaces = @{$self->layers->[$n]->surfaces};
|
|
my @neighbor_fill_surfaces = @{$self->layers->[$n]->fill_surfaces};
|
|
|
|
# find intersection between neighbor and current layer's surfaces
|
|
# intersections have contours and holes
|
|
my $new_internal_solid = intersection_ex(
|
|
$surfaces_p,
|
|
[ map $_->p, grep $_->surface_type =~ /internal/, @neighbor_surfaces ],
|
|
undef, 1,
|
|
);
|
|
next if !@$new_internal_solid;
|
|
|
|
# internal-solid are the union of the existing internal-solid surfaces
|
|
# and new ones
|
|
my $internal_solid = union_ex([
|
|
( map $_->p, grep $_->surface_type eq 'internal-solid', @neighbor_fill_surfaces ),
|
|
( map @$_, @$new_internal_solid ),
|
|
]);
|
|
|
|
# subtract intersections from layer surfaces to get resulting inner surfaces
|
|
my $internal = diff_ex(
|
|
[ map $_->p, grep $_->surface_type eq 'internal', @neighbor_fill_surfaces ],
|
|
[ map @$_, @$internal_solid ],
|
|
);
|
|
Slic3r::debugf " %d internal-solid and %d internal surfaces found\n",
|
|
scalar(@$internal_solid), scalar(@$internal);
|
|
|
|
# Note: due to floating point math we're going to get some very small
|
|
# polygons as $internal; they will be removed by removed_small_features()
|
|
|
|
# assign resulting inner surfaces to layer
|
|
my $neighbor_fill_surfaces = $self->layers->[$n]->fill_surfaces;
|
|
@$neighbor_fill_surfaces = ();
|
|
push @$neighbor_fill_surfaces, Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => 'internal')
|
|
for @$internal;
|
|
|
|
# assign new internal-solid surfaces to layer
|
|
push @$neighbor_fill_surfaces, Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => 'internal-solid')
|
|
for @$internal_solid;
|
|
|
|
# assign top and bottom surfaces to layer
|
|
foreach my $s (Slic3r::Surface->group(grep $_->surface_type =~ /top|bottom/, @neighbor_fill_surfaces)) {
|
|
my $solid_surfaces = diff_ex(
|
|
[ map $_->p, @$s ],
|
|
[ map @$_, @$internal_solid, @$internal ],
|
|
);
|
|
push @$neighbor_fill_surfaces, Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => $s->[0]->surface_type, bridge_angle => $s->[0]->bridge_angle)
|
|
for @$solid_surfaces;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
sub extrude_skirt {
|
|
my $self = shift;
|
|
return unless $Slic3r::skirts > 0;
|
|
|
|
# collect points from all layers contained in skirt height
|
|
my $skirt_height = $Slic3r::skirt_height;
|
|
$skirt_height = $self->layer_count if $skirt_height > $self->layer_count;
|
|
my @layers = map $self->layer($_), 0..($skirt_height-1);
|
|
my @points = (
|
|
(map @$_, map @{$_->expolygon}, map @{$_->slices}, @layers),
|
|
(map @$_, map @{$_->thin_walls}, @layers),
|
|
);
|
|
return if !@points;
|
|
|
|
# find out convex hull
|
|
my $convex_hull = convex_hull(\@points);
|
|
|
|
# draw outlines from outside to inside
|
|
my @skirts = ();
|
|
for (my $i = $Slic3r::skirts - 1; $i >= 0; $i--) {
|
|
my $distance = scale ($Slic3r::skirt_distance + ($Slic3r::flow_spacing * $i));
|
|
my $outline = offset([$convex_hull], $distance, $Slic3r::resolution * 100, JT_ROUND);
|
|
push @skirts, Slic3r::ExtrusionLoop->new(
|
|
polygon => Slic3r::Polygon->new(@{$outline->[0]}),
|
|
role => 'skirt',
|
|
);
|
|
}
|
|
|
|
# apply skirts to all layers
|
|
push @{$_->skirts}, @skirts for @layers;
|
|
}
|
|
|
|
# combine fill surfaces across layers
|
|
sub infill_every_layers {
|
|
my $self = shift;
|
|
return unless $Slic3r::infill_every_layers > 1 && $Slic3r::fill_density > 0;
|
|
|
|
printf "==> COMBINING INFILL\n";
|
|
|
|
# start from bottom, skip first layer
|
|
for (my $i = 1; $i < $self->layer_count; $i++) {
|
|
my $layer = $self->layer($i);
|
|
|
|
# skip layer if no internal fill surfaces
|
|
next if !grep $_->surface_type eq 'internal', @{$layer->fill_surfaces};
|
|
|
|
# for each possible depth, look for intersections with the lower layer
|
|
# we do this from the greater depth to the smaller
|
|
for (my $d = $Slic3r::infill_every_layers - 1; $d >= 1; $d--) {
|
|
next if ($i - $d) < 0;
|
|
my $lower_layer = $self->layer($i - 1);
|
|
|
|
# select surfaces of the lower layer having the depth we're looking for
|
|
my @lower_surfaces = grep $_->depth_layers == $d && $_->surface_type eq 'internal',
|
|
@{$lower_layer->fill_surfaces};
|
|
next if !@lower_surfaces;
|
|
|
|
# calculate intersection between our surfaces and theirs
|
|
my $intersection = intersection_ex(
|
|
[ map $_->p, grep $_->depth_layers <= $d, @lower_surfaces ],
|
|
[ map $_->p, grep $_->surface_type eq 'internal', @{$layer->fill_surfaces} ],
|
|
);
|
|
next if !@$intersection;
|
|
|
|
# new fill surfaces of the current layer are:
|
|
# - any non-internal surface
|
|
# - intersections found (with a $d + 1 depth)
|
|
# - any internal surface not belonging to the intersection (with its original depth)
|
|
{
|
|
my @new_surfaces = ();
|
|
push @new_surfaces, grep $_->surface_type ne 'internal', @{$layer->fill_surfaces};
|
|
push @new_surfaces, map Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => 'internal', depth_layers => $d + 1), @$intersection;
|
|
|
|
foreach my $depth (reverse $d..$Slic3r::infill_every_layers) {
|
|
push @new_surfaces, map Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => 'internal', depth_layers => $depth),
|
|
|
|
# difference between our internal layers with depth == $depth
|
|
# and the intersection found
|
|
@{diff_ex(
|
|
[
|
|
map $_->p, grep $_->surface_type eq 'internal' && $_->depth_layers == $depth,
|
|
@{$layer->fill_surfaces},
|
|
],
|
|
[ map @$_, @$intersection ],
|
|
1,
|
|
)};
|
|
}
|
|
@{$layer->fill_surfaces} = @new_surfaces;
|
|
}
|
|
|
|
# now we remove the intersections from lower layer
|
|
{
|
|
my @new_surfaces = ();
|
|
push @new_surfaces, grep $_->surface_type ne 'internal', @{$lower_layer->fill_surfaces};
|
|
foreach my $depth (1..$Slic3r::infill_every_layers) {
|
|
push @new_surfaces, map Slic3r::Surface->new
|
|
(expolygon => $_, surface_type => 'internal', depth_layers => $depth),
|
|
|
|
# difference between internal layers with depth == $depth
|
|
# and the intersection found
|
|
@{diff_ex(
|
|
[
|
|
map $_->p, grep $_->surface_type eq 'internal' && $_->depth_layers == $depth,
|
|
@{$lower_layer->fill_surfaces},
|
|
],
|
|
[ map @$_, @$intersection ],
|
|
1,
|
|
)};
|
|
}
|
|
@{$lower_layer->fill_surfaces} = @new_surfaces;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
sub export_gcode {
|
|
my $self = shift;
|
|
my ($file) = @_;
|
|
|
|
printf "Exporting GCODE file...\n";
|
|
|
|
# open output gcode file
|
|
open my $fh, ">", $file
|
|
or die "Failed to open $file for writing\n";
|
|
|
|
# write some information
|
|
my @lt = localtime;
|
|
printf $fh "; generated by Slic3r $Slic3r::VERSION on %02d-%02d-%02d at %02d:%02d:%02d\n\n",
|
|
$lt[5] + 1900, $lt[4]+1, $lt[3], $lt[2], $lt[1], $lt[0];
|
|
|
|
print $fh "; $_\n" foreach split /\R/, $Slic3r::notes;
|
|
print $fh "\n" if $Slic3r::notes;
|
|
|
|
for (qw(layer_height perimeters solid_layers fill_density nozzle_diameter filament_diameter
|
|
perimeter_speed infill_speed travel_speed extrusion_width_ratio scale)) {
|
|
printf $fh "; %s = %s\n", $_, Slic3r::Config->get($_);
|
|
}
|
|
printf $fh "; single wall width = %.2fmm\n", $Slic3r::flow_width;
|
|
print $fh "\n";
|
|
|
|
# write start commands to file
|
|
printf $fh "M104 S%d ; set temperature\n", $Slic3r::temperature if $Slic3r::temperature;
|
|
print $fh "$Slic3r::start_gcode\n";
|
|
printf $fh "M109 S%d ; wait for temperature to be reached\n", $Slic3r::temperature if $Slic3r::temperature;
|
|
print $fh "G90 ; use absolute coordinates\n";
|
|
print $fh "G21 ; set units to millimeters\n";
|
|
printf $fh "G92 %s0 ; reset extrusion distance\n", $Slic3r::extrusion_axis if $Slic3r::extrusion_axis;
|
|
if ($Slic3r::use_relative_e_distances) {
|
|
print $fh "M83 ; use relative distances for extrusion\n";
|
|
} else {
|
|
print $fh "M82 ; use absolute distances for extrusion\n";
|
|
}
|
|
|
|
# set up our extruder object
|
|
my $extruder = Slic3r::Extruder->new(
|
|
# calculate X,Y shift to center print around specified origin
|
|
shift_x => $Slic3r::print_center->[X] - ($self->x_length * $Slic3r::resolution / 2),
|
|
shift_y => $Slic3r::print_center->[Y] - ($self->y_length * $Slic3r::resolution / 2),
|
|
);
|
|
|
|
# write gcode commands layer by layer
|
|
foreach my $layer (@{ $self->layers }) {
|
|
# go to layer
|
|
print $fh $extruder->change_layer($layer);
|
|
|
|
# extrude skirts
|
|
print $fh $extruder->set_acceleration($Slic3r::perimeter_acceleration);
|
|
print $fh $extruder->extrude_loop($_, 'skirt') for @{ $layer->skirts };
|
|
|
|
# extrude perimeters
|
|
print $fh $extruder->extrude($_, 'perimeter') for @{ $layer->perimeters };
|
|
|
|
# extrude fills
|
|
print $fh $extruder->set_acceleration($Slic3r::infill_acceleration);
|
|
for my $fill (@{ $layer->fills }) {
|
|
print $fh $extruder->extrude_path($_, 'fill')
|
|
for $fill->shortest_path($extruder->last_pos);
|
|
}
|
|
}
|
|
|
|
# save statistic data
|
|
$self->total_extrusion_length($extruder->total_extrusion_length);
|
|
|
|
# write end commands to file
|
|
print $fh $extruder->retract;
|
|
print $fh "M501 ; reset acceleration\n" if $Slic3r::acceleration;
|
|
print $fh "$Slic3r::end_gcode\n";
|
|
|
|
printf $fh "; filament used = %.1fmm (%.1fcm3)\n",
|
|
$self->total_extrusion_length, $self->total_extrusion_volume;
|
|
|
|
# close our gcode file
|
|
close $fh;
|
|
}
|
|
|
|
sub total_extrusion_volume {
|
|
my $self = shift;
|
|
return $self->total_extrusion_length * ($Slic3r::filament_diameter**2) * PI/4 / 1000;
|
|
}
|
|
|
|
1;
|