PrusaSlicer-NonPlainar/lib/Slic3r/GCode/CoolingBuffer.pm
Chow Loong Jin 2e2e4e68d3 Fix layer time slowdown
The recent GCode writer changes which put the speed changes on a line of
their own have caused the layer time slowdown to be ignored by the regex
in CoolingBuffer.pm.

Fixes: #3134
2016-04-10 16:10:18 +08:00

82 lines
3.2 KiB
Perl

package Slic3r::GCode::CoolingBuffer;
use Moo;
has 'config' => (is => 'ro', required => 1); # Slic3r::Config::Print
has 'gcodegen' => (is => 'ro', required => 1);
has 'gcode' => (is => 'rw', default => sub {""});
has 'elapsed_time' => (is => 'rw', default => sub {0});
has 'layer_id' => (is => 'rw');
has 'last_z' => (is => 'rw', default => sub { {} }); # obj_id => z (basically a 'last seen' table)
has 'min_print_speed' => (is => 'lazy');
sub _build_min_print_speed {
my $self = shift;
return 60 * $self->config->min_print_speed;
}
sub append {
my $self = shift;
my ($gcode, $obj_id, $layer_id, $print_z) = @_;
my $return = "";
if (exists $self->last_z->{$obj_id} && $self->last_z->{$obj_id} != $print_z) {
$return = $self->flush;
}
$self->layer_id($layer_id);
$self->last_z->{$obj_id} = $print_z;
$self->gcode($self->gcode . $gcode);
$self->elapsed_time($self->elapsed_time + $self->gcodegen->elapsed_time);
$self->gcodegen->set_elapsed_time(0);
return $return;
}
sub flush {
my $self = shift;
my $gcode = $self->gcode;
my $elapsed = $self->elapsed_time;
$self->gcode("");
$self->elapsed_time(0);
$self->last_z({}); # reset the whole table otherwise we would compute overlapping times
my $fan_speed = $self->config->fan_always_on ? $self->config->min_fan_speed : 0;
my $speed_factor = 1;
if ($self->config->cooling) {
Slic3r::debugf "Layer %d estimated printing time: %d seconds\n", $self->layer_id, $elapsed;
if ($elapsed < $self->config->slowdown_below_layer_time) {
$fan_speed = $self->config->max_fan_speed;
$speed_factor = $elapsed / $self->config->slowdown_below_layer_time;
} elsif ($elapsed < $self->config->fan_below_layer_time) {
$fan_speed = $self->config->max_fan_speed - ($self->config->max_fan_speed - $self->config->min_fan_speed)
* ($elapsed - $self->config->slowdown_below_layer_time)
/ ($self->config->fan_below_layer_time - $self->config->slowdown_below_layer_time); #/
}
Slic3r::debugf " fan = %d%%, speed = %d%%\n", $fan_speed, $speed_factor * 100;
if ($speed_factor < 1) {
$gcode =~ s/^(?=.*?;_EXTRUDE_SET_SPEED)(?!.*?;_WIPE)(?<!;_BRIDGE_FAN_START\n)(G1\sF)(\d+(?:\.\d+)?)/
my $new_speed = $2 * $speed_factor;
$1 . sprintf("%.3f", $new_speed < $self->min_print_speed ? $self->min_print_speed : $new_speed)
/gexm;
}
}
$fan_speed = 0 if $self->layer_id < $self->config->disable_fan_first_layers;
$gcode = $self->gcodegen->writer->set_fan($fan_speed) . $gcode;
# bridge fan speed
if (!$self->config->cooling || $self->config->bridge_fan_speed == 0 || $self->layer_id < $self->config->disable_fan_first_layers) {
$gcode =~ s/^;_BRIDGE_FAN_(?:START|END)\n//gm;
} else {
$gcode =~ s/^;_BRIDGE_FAN_START\n/ $self->gcodegen->writer->set_fan($self->config->bridge_fan_speed, 1) /gmex;
$gcode =~ s/^;_BRIDGE_FAN_END\n/ $self->gcodegen->writer->set_fan($fan_speed, 1) /gmex;
}
$gcode =~ s/;_WIPE//g;
$gcode =~ s/;_EXTRUDE_SET_SPEED//g;
return $gcode;
}
1;