PrusaSlicer-NonPlainar/resources/profiles/BIQU.ini

# Print profiles for BIQU printers.
# Based on PR https://github.com/slic3r/slic3r-profiles/pull/32 by @bkonosky


[vendor]
name = BIQU
config_version = 0.1.0
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIQU/

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:BIQUBX]
name = BIQU BX
variants = 0.4
technology = FFF
bed_model = BX_Bed.stl
bed_texture = BX_Texture.png
default_materials = Generic PLA @BIQU; Generic PETG @BIQU; Generic ABS @BIQU

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = monotonic
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 25
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
bridge_acceleration = 250
perimeter_acceleration = 500
infill_acceleration = 500
first_layer_acceleration = 500
default_acceleration = 500
dont_support_bridges = 1
ensure_vertical_shell_thickness = 1
external_perimeters_first = 0
external_perimeter_speed = 25
extra_perimeters = 0
extruder_clearance_height = 34
extruder_clearance_radius = 47
fill_angle = 45
fill_density = 15%
fill_pattern = gyroid
first_layer_height = 0.2
elefant_foot_compensation = 0.1
first_layer_speed = 20
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_speed = 40
raft_layers = 0
seam_position = nearest
single_extruder_multi_material_priming = 0
skirts = 1
skirt_distance = 3
skirt_height = 2
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_bottom_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_solid_first_layer = 1
support_material_spacing = 2
support_material_speed = 40
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_perimeters = 1
thin_walls = 1
top_fill_pattern = monotonic
top_solid_infill_speed = 30
travel_speed = 150
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 160
wipe_tower_y = 160
xy_size_compensation = 0
extrusion_width = 0.45
external_perimeter_extrusion_width = 0.43
first_layer_extrusion_width = 0.55
support_material_extrusion_width = 0.38
top_infill_extrusion_width = 0.43

[print:*0.08mm*]
inherits = *common*
layer_height = 0.08
perimeters = 3
bottom_solid_layers = 9
top_solid_layers = 11
bridge_flow_ratio = 0.7

[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
perimeters = 3
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 0.7

[print:*0.12mm*]
inherits = *common*
layer_height = 0.12
perimeters = 3
bottom_solid_layers = 6
top_solid_layers = 7
bridge_flow_ratio = 0.7

[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 7
bridge_flow_ratio = 0.85

[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
bottom_solid_layers = 4
top_solid_layers = 5

[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.32mm*]
inherits = *common*
layer_height = 0.32
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.08mm HIGHDETAIL @BIQU]
inherits = *0.08mm*
compatible_printers_condition = printer_model=~/(BIQUBX).*/

[print:0.10mm HIGHDETAIL @BIQU]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(BIQUBX).*/

[print:0.12mm DETAIL @BIQU]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(BIQUBX).*/

[print:0.16mm OPTIMAL @BIQU]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(BIQUBX).*/

[print:0.20mm NORMAL @BIQU]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(BIQUBX).*/

[print:0.24mm DRAFT @BIQU]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(BIQUBX).*/

[print:0.28mm SUPERDRAFT @BIQU]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(BIQUBX).*/

[filament:*common*]
cooling = 0
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIQU.*/

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_max_volumetric_speed = 15
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 210
fan_always_on = 1
cooling = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 205

[filament:*PET*]
inherits = *common*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 240

[filament:*ABS*]
inherits = *common*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 11
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245

[filament:Generic PLA @BIQU]
inherits = *PLA*
filament_vendor = Generic

[filament:Generic PETG @BIQU]
inherits = *PET*
filament_vendor = Generic

[filament:Generic ABS @BIQU]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic



# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n\n
between_objects_gcode = 
pause_print_gcode = 
deretract_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin2
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 1000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 1000
machine_max_acceleration_y = 1000
machine_max_acceleration_z = 100
machine_max_feedrate_e = 65
machine_max_feedrate_x = 200
machine_max_feedrate_y = 200
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
max_layer_height = 0.28
min_layer_height = 0.08
max_print_height = 250
nozzle_diameter = 0.4
printer_notes = 
printer_settings_id = 
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 1
retract_length = 5
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
single_extruder_multi_material = 0
thumbnails = 16x16,220x124
thumbnails_color = #018aff
thumbnails_custom_color = 0
thumbnails_end_file = 0
thumbnails_format = PNG
thumbnails_with_bed = 0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
z_step = 0.04
printer_model = 
default_print_profile = 0.16mm OPTIMAL @BIQU
default_filament_profile = Generic PLA @BIQU
start_gcode = M117 Initial homing sequence. ; Home so that the probe is positioned to heat\nG28\n\nM117 Probe heating position\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\n\nM117 Getting the heaters up to temp!\nM104 S140 ; Set Extruder temperature, no wait\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\n\nM117 Waiting for probe to warm!\nG4 S90 ; Wait another 90s for the probe to absorb heat.\n\nM117 Post warming re-home\nG28 ; Home all axes again after warming\n\nM117 Z-Align\nG34\n\nM117 ABL Probing\nG29\n\nM900 K0 L0 T0 ; Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\n\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\n\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM104 S{first_layer_temperature[initial_tool]} ; Set Extruder temperature\nM109 S{first_layer_temperature[initial_tool]} ; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\n\nG92 E0 ; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Printing...\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract a bit more and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z by 10mm\nG90 ;Return to absolute positioning\n\nG1 X0 Y{print_bed_max[1]*0.8} ;TaDaaaa\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n

[printer:*spriteextruder*]
retract_length = 0.6
retract_speed = 40
deretract_speed = 40
retract_before_travel = 1
retract_before_wipe = 0%

# Intended for printers with dual extruders and a single hotend/nozzle, like the CR-X series
[printer:*dualextruder*]
single_extruder_multi_material = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
extra_loading_move = -2
parking_pos_retraction = 92
deretract_speed = 40,40
extruder_colour = #FCE94F;#729FCF
extruder_offset = 0x0,0x0
max_layer_height = 0.28,0.28
min_layer_height = 0.08,0.08
nozzle_diameter = 0.4,0.4
retract_before_travel = 2,2
retract_before_wipe = 70%,70%
retract_layer_change = 1,1
retract_length = 5,5
retract_length_toolchange = 1,1
retract_lift = 0,0
retract_lift_above = 0,0
retract_lift_below = 0,0
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retract_speed = 60,60
wipe = 1,1

[printer:*SmallBowden*]
inherits = *common*
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
retract_before_travel = 2
retract_length = 5
retract_speed = 60
deretract_speed = 40
retract_before_wipe = 70%
default_filament_profile = Generic PLA @BIQU

[printer:*0.4nozzle*]
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.04
printer_variant = 0.4
default_print_profile = 0.20mm NORMAL @BIQU

[printer:*BIQU BX*]
inherits = *common*; *spriteextruder*
bed_shape =  0x0,250x0,250x250,0x250
max_print_height = 250
printer_model = BIQUBX
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIQU\nPRINTER_MODEL_BIQUBX

[printer:BIQU BX]
inherits = *BIQU BX*; *0.4nozzle*