264 lines
12 KiB
C++
264 lines
12 KiB
C++
#include <catch2/catch.hpp>
|
|
|
|
#include "libslic3r/GCodeReader.hpp"
|
|
#include "libslic3r/Config.hpp"
|
|
#include "libslic3r/Geometry.hpp"
|
|
|
|
#include <boost/algorithm/string.hpp>
|
|
|
|
#include "test_data.hpp" // get access to init_print, etc
|
|
|
|
using namespace Slic3r::Test;
|
|
using namespace Slic3r;
|
|
|
|
/// Helper method to find the tool used for the brim (always the first extrusion)
|
|
int get_brim_tool(std::string &gcode, Slic3r::GCodeReader& parser) {
|
|
int brim_tool = -1;
|
|
int tool = -1;
|
|
|
|
parser.parse_buffer(gcode, [&tool, &brim_tool] (Slic3r::GCodeReader& self, const Slic3r::GCodeReader::GCodeLine& line)
|
|
{
|
|
// if the command is a T command, set the the current tool
|
|
if (boost::starts_with(line.cmd(), "T")) {
|
|
tool = atoi(line.cmd().data() + 1);
|
|
} else if (line.cmd() == "G1" && line.extruding(self) && line.dist_XY(self) > 0 && brim_tool < 0) {
|
|
brim_tool = tool;
|
|
}
|
|
});
|
|
|
|
return brim_tool;
|
|
}
|
|
|
|
TEST_CASE("Skirt height is honored") {
|
|
std::shared_ptr<Slic3r::DynamicPrintConfig> config(Slic3r::DynamicPrintConfig::new_from_defaults());
|
|
config->opt_int("skirts") = 1;
|
|
config->opt_int("skirt_height") = 5;
|
|
config->opt_int("perimeters") = 0;
|
|
config->opt_float("support_material_speed") = 99;
|
|
|
|
// avoid altering speeds unexpectedly
|
|
config->set_deserialize("cooling", "0");
|
|
config->set_deserialize("first_layer_speed", "100%");
|
|
double support_speed = config->opt<Slic3r::ConfigOptionFloat>("support_material_speed")->value * MM_PER_MIN;
|
|
|
|
std::map<double, bool> layers_with_skirt;
|
|
std::string gcode;
|
|
GCodeReader parser;
|
|
Slic3r::Model model;
|
|
|
|
SECTION("printing a single object") {
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
gcode = Slic3r::Test::gcode(print);
|
|
}
|
|
|
|
SECTION("printing multiple objects") {
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20, TestMesh::cube_20x20x20}, model, config);
|
|
gcode = Slic3r::Test::gcode(print);
|
|
}
|
|
parser.parse_buffer(gcode, [&layers_with_skirt, &support_speed] (Slic3r::GCodeReader& self, const Slic3r::GCodeReader::GCodeLine& line)
|
|
{
|
|
if (line.extruding(self) && self.f() == Approx(support_speed)) {
|
|
layers_with_skirt[self.z()] = 1;
|
|
}
|
|
});
|
|
|
|
REQUIRE(layers_with_skirt.size() == (size_t)config->opt_int("skirt_height"));
|
|
}
|
|
|
|
SCENARIO("Original Slic3r Skirt/Brim tests", "[!mayfail]") {
|
|
Slic3r::GCodeReader parser;
|
|
Slic3r::Model model;
|
|
std::string gcode;
|
|
GIVEN("A default configuration") {
|
|
std::shared_ptr<Slic3r::DynamicPrintConfig> config(Slic3r::DynamicPrintConfig::new_from_defaults());
|
|
config->set_num_extruders(4);
|
|
config->opt_float("support_material_speed") = 99;
|
|
config->set_deserialize("first_layer_height", "0.3");
|
|
config->set_deserialize("gcode_comments", "1");
|
|
|
|
// avoid altering speeds unexpectedly
|
|
config->set_deserialize("cooling", "0");
|
|
config->set_deserialize("first_layer_speed", "100%");
|
|
// remove noise from top/solid layers
|
|
config->opt_int("top_solid_layers") = 0;
|
|
config->opt_int("bottom_solid_layers") = 1;
|
|
|
|
WHEN("Brim width is set to 5") {
|
|
config->opt_int("perimeters") = 0;
|
|
config->opt_int("skirts") = 0;
|
|
config->opt_float("brim_width") = 5;
|
|
THEN("Brim is generated") {
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
gcode = Slic3r::Test::gcode(print);
|
|
bool brim_generated = false;
|
|
double support_speed = config->opt<Slic3r::ConfigOptionFloat>("support_material_speed")->value * MM_PER_MIN;
|
|
parser.parse_buffer(gcode, [&brim_generated, support_speed] (Slic3r::GCodeReader& self, const Slic3r::GCodeReader::GCodeLine& line)
|
|
{
|
|
if (self.z() == Approx(0.3) || line.new_Z(self) == Approx(0.3)) {
|
|
if (line.extruding(self) && self.f() == Approx(support_speed)) {
|
|
brim_generated = true;
|
|
}
|
|
}
|
|
});
|
|
REQUIRE(brim_generated);
|
|
}
|
|
}
|
|
|
|
WHEN("Skirt area is smaller than the brim") {
|
|
config->opt_int("skirts") = 1;
|
|
config->opt_float("brim_width") = 10;
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
THEN("Gcode generates") {
|
|
REQUIRE(! Slic3r::Test::gcode(print).empty());
|
|
}
|
|
}
|
|
|
|
WHEN("Skirt height is 0 and skirts > 0") {
|
|
config->opt_int("skirts") = 2;
|
|
config->opt_int("skirt_height") = 0;
|
|
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
THEN("Gcode generates") {
|
|
REQUIRE(! Slic3r::Test::gcode(print).empty());
|
|
}
|
|
}
|
|
|
|
WHEN("Perimeter extruder = 2 and support extruders = 3") {
|
|
config->opt_int("skirts") = 0;
|
|
config->opt_float("brim_width") = 5;
|
|
config->opt_int("perimeter_extruder") = 2;
|
|
config->opt_int("support_material_extruder") = 3;
|
|
THEN("Brim is printed with the extruder used for the perimeters of first object") {
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
gcode = Slic3r::Test::gcode(print);
|
|
int tool = get_brim_tool(gcode, parser);
|
|
REQUIRE(tool == config->opt_int("perimeter_extruder") - 1);
|
|
}
|
|
}
|
|
WHEN("Perimeter extruder = 2, support extruders = 3, raft is enabled") {
|
|
config->opt_int("skirts") = 0;
|
|
config->opt_float("brim_width") = 5;
|
|
config->opt_int("perimeter_extruder") = 2;
|
|
config->opt_int("support_material_extruder") = 3;
|
|
config->opt_int("raft_layers") = 1;
|
|
THEN("brim is printed with same extruder as skirt") {
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
gcode = Slic3r::Test::gcode(print);
|
|
int tool = get_brim_tool(gcode, parser);
|
|
REQUIRE(tool == config->opt_int("support_material_extruder") - 1);
|
|
}
|
|
}
|
|
WHEN("brim width to 1 with layer_width of 0.5") {
|
|
config->opt_int("skirts") = 0;
|
|
config->set_deserialize("first_layer_extrusion_width", "0.5");
|
|
config->opt_float("brim_width") = 1;
|
|
|
|
THEN("2 brim lines") {
|
|
Slic3r::Model model;
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
print->process();
|
|
REQUIRE(print->brim().entities.size() == 2);
|
|
}
|
|
}
|
|
|
|
#if 0
|
|
WHEN("brim ears on a square") {
|
|
config->opt_int("skirts") = 0);
|
|
config->set_deserialize("first_layer_extrusion_width", "0.5");
|
|
config->opt_float("brim_width") = 1;
|
|
config->set("brim_ears", true);
|
|
config->set("brim_ears_max_angle", 91);
|
|
|
|
Slic3r::Model model;
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
print->process();
|
|
|
|
THEN("Four brim ears") {
|
|
REQUIRE(print->brim.size() == 4);
|
|
}
|
|
}
|
|
|
|
WHEN("brim ears on a square but with a too small max angle") {
|
|
config->set("skirts", 0);
|
|
config->set("first_layer_extrusion_width", 0.5);
|
|
config->set("brim_width", 1);
|
|
config->set("brim_ears", true);
|
|
config->set("brim_ears_max_angle", 89);
|
|
|
|
THEN("no brim") {
|
|
Slic3r::Model model;
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
print->process();
|
|
REQUIRE(print->brim.size() == 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
WHEN("Object is plated with overhang support and a brim") {
|
|
config->opt_float("layer_height") = 0.4;
|
|
config->set_deserialize("first_layer_height", "0.4");
|
|
config->opt_int("skirts") = 1;
|
|
config->opt_float("skirt_distance") = 0;
|
|
config->opt_float("support_material_speed") = 99;
|
|
config->opt_int("perimeter_extruder") = 1;
|
|
config->opt_int("support_material_extruder") = 2;
|
|
config->opt_int("infill_extruder") = 3; // ensure that a tool command gets emitted.
|
|
config->set_deserialize("cooling", "0"); // to prevent speeds to be altered
|
|
config->set_deserialize("first_layer_speed", "100%"); // to prevent speeds to be altered
|
|
|
|
Slic3r::Model model;
|
|
auto print = Slic3r::Test::init_print({TestMesh::overhang}, model, config);
|
|
print->process();
|
|
|
|
// config->set("support_material", true); // to prevent speeds to be altered
|
|
|
|
THEN("skirt length is large enough to contain object with support") {
|
|
CHECK(config->opt_bool("support_material")); // test is not valid if support material is off
|
|
double skirt_length = 0.0;
|
|
Points extrusion_points;
|
|
int tool = -1;
|
|
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
std::string gcode = Slic3r::Test::gcode(print);
|
|
|
|
double support_speed = config->opt<ConfigOptionFloat>("support_material_speed")->value * MM_PER_MIN;
|
|
parser.parse_buffer(gcode, [config, &extrusion_points, &tool, &skirt_length, support_speed] (Slic3r::GCodeReader& self, const Slic3r::GCodeReader::GCodeLine& line)
|
|
{
|
|
// std::cerr << line.cmd() << "\n";
|
|
if (boost::starts_with(line.cmd(), "T")) {
|
|
tool = atoi(line.cmd().data() + 1);
|
|
} else if (self.z() == Approx(config->opt<ConfigOptionFloat>("first_layer_height")->value)) {
|
|
// on first layer
|
|
if (line.extruding(self) && line.dist_XY(self) > 0) {
|
|
float speed = ( self.f() > 0 ? self.f() : line.new_F(self));
|
|
// std::cerr << "Tool " << tool << "\n";
|
|
if (speed == Approx(support_speed) && tool == config->opt_int("perimeter_extruder") - 1) {
|
|
// Skirt uses first material extruder, support material speed.
|
|
skirt_length += line.dist_XY(self);
|
|
} else {
|
|
extrusion_points.push_back(Slic3r::Point::new_scale(line.new_X(self), line.new_Y(self)));
|
|
}
|
|
}
|
|
}
|
|
|
|
if (self.z() == Approx(0.3) || line.new_Z(self) == Approx(0.3)) {
|
|
if (line.extruding(self) && self.f() == Approx(support_speed)) {
|
|
}
|
|
}
|
|
});
|
|
Slic3r::Polygon convex_hull = Slic3r::Geometry::convex_hull(extrusion_points);
|
|
double hull_perimeter = unscale<double>(convex_hull.split_at_first_point().length());
|
|
REQUIRE(skirt_length > hull_perimeter);
|
|
}
|
|
}
|
|
WHEN("Large minimum skirt length is used.") {
|
|
config->opt_float("min_skirt_length") = 20;
|
|
Slic3r::Model model;
|
|
auto print = Slic3r::Test::init_print({TestMesh::cube_20x20x20}, model, config);
|
|
THEN("Gcode generation doesn't crash") {
|
|
REQUIRE(! Slic3r::Test::gcode(print).empty());
|
|
}
|
|
}
|
|
}
|
|
}
|