747 lines
23 KiB
INI
747 lines
23 KiB
INI
# RatRig profiles
|
|
|
|
# Based on the profiles from PR: https://github.com/slic3r/slic3r-profiles/pull/13 by top-gun.
|
|
|
|
# The graphics for the bed (SVG) was created by PwnCNC and published on Thingiverse under the Creative Commons Attribution license: https://www.thingiverse.com/thing:4861532/files
|
|
|
|
[vendor]
|
|
# Vendor name will be shown by the Config Wizard.
|
|
name = RatRig
|
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
|
# This means, the server may force the Slic3r configuration to be downgraded.
|
|
config_version = 1.0.0
|
|
# Where to get the updates from?
|
|
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/RatRig/
|
|
# The printer models will be shown by the Configuration Wizard in this order,
|
|
# also the first model installed & the first nozzle installed will be activated after install.
|
|
#TODO: One day we may differentiate variants of the nozzles / hot ends,
|
|
#for example by the melt zone size, or whether the nozzle is hardened.
|
|
# Printer model name will be shown by the installation wizard.
|
|
|
|
[printer_model:VC3_300]
|
|
name = RatRig V-Core-3 300mm
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = V-Core-3
|
|
bed_model = rr-vc-300.stl
|
|
bed_texture = rr-vc-300.svg
|
|
default_materials = Generic PETG V6 @RatRig; Generic PETG HF @RatRig; Generic PLA @RatRig; Esun ePA-CF @RatRig; Generic ABS @RatRig
|
|
|
|
[printer_model:VC3_400]
|
|
name = RatRig V-Core-3 400mm
|
|
variants = 0.4
|
|
family = V-Core-3
|
|
bed_model = rr-vc-400.stl
|
|
bed_texture = rr-vc-400.svg
|
|
default_materials = Generic PETG V6 @RatRig; Generic PETG HF @RatRig; Generic PLA @RatRig; Esun ePA-CF @RatRig; Generic ABS @RatRig
|
|
|
|
[printer_model:VC3_500]
|
|
name = RatRig V-Core-3 500mm
|
|
variants = 0.4
|
|
family = V-Core-3
|
|
bed_model = rr-vc-500.stl
|
|
bed_texture = rr-vc-500.svg
|
|
default_materials = Generic PETG V6 @RatRig; Generic PETG HF @RatRig; Generic PLA @RatRig; Esun ePA-CF @RatRig; Generic ABS @RatRig
|
|
|
|
[printer_model:VMINION]
|
|
name = RatRig V-Minion
|
|
variants = 0.4
|
|
technology = FFF
|
|
family = V-Minion
|
|
bed_model = rr-vminion.stl
|
|
bed_texture = rr-vminion.svg
|
|
default_materials = Generic PETG V6 @RatRig; Generic PETG HF @RatRig; Generic PLA @RatRig; @Esun ePA-CF RatRig; Generic ABS @RatRig
|
|
|
|
[print:*common*]
|
|
compatible_printers_condition = printer_model=~/.*VC3_.*/ and nozzle_diameter[0]==0.4
|
|
allow_empty_layers = 0
|
|
avoid_crossing_perimeters = 0
|
|
avoid_crossing_perimeters_max_detour = 0
|
|
bottom_fill_pattern = monotonic
|
|
extra_perimeters = 0
|
|
bottom_solid_layers = 8
|
|
bottom_solid_min_thickness = 0
|
|
bridge_acceleration = 0
|
|
bridge_angle = 0
|
|
bridge_speed = 60
|
|
brim_offset = 0
|
|
brim_width = 0
|
|
clip_multipart_objects = 1
|
|
complete_objects = 0
|
|
complete_objects_one_skirt = 0
|
|
complete_objects_sort = object
|
|
default_acceleration = 3000
|
|
dont_support_bridges = 1
|
|
draft_shield = 0
|
|
ensure_vertical_shell_thickness = 1
|
|
exact_last_layer_height = 0
|
|
external_infill_margin = 150%
|
|
external_perimeter_extrusion_width = 0.4
|
|
external_perimeter_speed = 90%
|
|
extruder_clearance_height = 25
|
|
extruder_clearance_radius = 45
|
|
extrusion_width = 0.4
|
|
fill_angle = 45
|
|
fill_density = 15%
|
|
fill_pattern = cubic
|
|
first_layer_acceleration = 1000
|
|
first_layer_extrusion_width = 0.45
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 40
|
|
gap_fill = 1
|
|
gap_fill_speed = 50
|
|
gcode_comments = 0
|
|
gcode_label_objects = 1
|
|
infill_acceleration = 4000
|
|
infill_anchor = 600%
|
|
infill_anchor_max = 5
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.4
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 18%
|
|
infill_speed = 150
|
|
interface_shells = 0
|
|
ironing = 0
|
|
ironing_flowrate = 15%
|
|
ironing_spacing = 0.1
|
|
ironing_speed = 15
|
|
ironing_type = top
|
|
layer_height = 0.15
|
|
max_print_speed = 300
|
|
max_volumetric_speed = 12
|
|
min_skirt_length = 4
|
|
notes =
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode
|
|
over_bridge_flow_ratio = 100%
|
|
perimeter_acceleration = 3000
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.4
|
|
perimeter_speed = 120
|
|
perimeters = 2
|
|
post_process =
|
|
print_settings_id =
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = aligned
|
|
skirt_distance = 10
|
|
skirt_height = 1
|
|
skirts = 2
|
|
slice_closing_radius = 0.049
|
|
small_perimeter_speed = 25
|
|
solid_fill_pattern = rectilinear
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.4
|
|
solid_infill_speed = 80%
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_angle = 0
|
|
support_material_auto = 1
|
|
support_material_buildplate_only = 1
|
|
support_material_contact_distance_bottom = 0.2
|
|
support_material_contact_distance_top = 0.2
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.38
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_extruder = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_pattern = rectilinear
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_solid_first_layer = 0
|
|
support_material_spacing = 2
|
|
support_material_speed = 50
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 65
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 60%
|
|
thin_walls = 0
|
|
threads = 4
|
|
top_fill_pattern = monotonic
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_infill_speed = 60%
|
|
top_solid_layers = 8
|
|
top_solid_min_thickness = 0
|
|
travel_speed = 250
|
|
travel_speed_z = 0
|
|
wipe_tower = 0
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_no_sparse_layers = 0
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
elefant_foot_compensation = 0.1
|
|
|
|
[print:*common_minion*]
|
|
compatible_printers_condition = printer_model=~/.*MINION.*/
|
|
avoid_crossing_perimeters = 0
|
|
avoid_crossing_perimeters_max_detour = 0
|
|
bottom_solid_min_thickness = 0
|
|
bridge_acceleration = 0
|
|
bridge_angle = 0
|
|
bridge_speed = 60
|
|
brim_offset = 0
|
|
brim_width = 0
|
|
brim_width_interior = 0
|
|
clip_multipart_objects = 1
|
|
complete_objects = 0
|
|
default_acceleration = 2000
|
|
dont_support_bridges = 1
|
|
draft_shield = 0
|
|
ensure_vertical_shell_thickness = 1
|
|
external_perimeter_extrusion_width = 0.4
|
|
external_perimeter_speed = 110
|
|
extra_perimeters = 0
|
|
extra_perimeters_overhangs = 0
|
|
extruder_clearance_height = 25
|
|
extruder_clearance_radius = 45
|
|
extrusion_width = 0.4
|
|
fill_angle = 45
|
|
fill_density = 15%
|
|
fill_pattern = cubic
|
|
first_layer_acceleration = 1000
|
|
first_layer_extrusion_width = 0.45
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 50
|
|
gap_fill = 1
|
|
gap_fill_speed = 50
|
|
gcode_comments = 0
|
|
gcode_label_objects = 1
|
|
infill_acceleration = 3000
|
|
infill_anchor = 600%
|
|
infill_anchor_max = 5
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.4
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 18%
|
|
infill_speed = 140
|
|
interface_shells = 0
|
|
ironing = 0
|
|
ironing_flowrate = 15%
|
|
ironing_spacing = 0.1
|
|
ironing_speed = 15
|
|
ironing_type = top
|
|
layer_height = 0.2
|
|
max_print_speed = 200
|
|
max_volumetric_speed = 15
|
|
min_skirt_length = 4
|
|
notes =
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode
|
|
perimeter_acceleration = 2500
|
|
perimeter_bonding = 0%
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.4
|
|
perimeter_overlap = 100%
|
|
perimeter_round_corners = 0
|
|
perimeter_speed = 120
|
|
perimeters = 2
|
|
post_process =
|
|
print_settings_id =
|
|
print_temperature = 0
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = aligned
|
|
single_extruder_multi_material_priming = 1
|
|
skirt_distance = 10
|
|
skirt_height = 1
|
|
skirts = 2
|
|
slice_closing_radius = 0.049
|
|
small_perimeter_speed = 50
|
|
solid_fill_pattern = rectilinear
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.4
|
|
solid_infill_speed = 80%
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_angle = 0
|
|
support_material_auto = 0
|
|
support_material_buildplate_only = 1
|
|
support_material_contact_distance_bottom = 0.2
|
|
support_material_contact_distance_top = 0.2
|
|
support_material_enforce_layers = 0
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.38
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_extruder = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_pattern = rectilinear
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_solid_first_layer = 0
|
|
support_material_spacing = 2
|
|
support_material_speed = 50
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 65
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 60%
|
|
thin_walls = 0
|
|
top_fill_pattern = monotonic
|
|
top_infill_extrusion_width = 0.4
|
|
top_solid_infill_speed = 60%
|
|
top_solid_layers = 5
|
|
top_solid_min_thickness = 0
|
|
travel_speed = 200
|
|
travel_speed_z = 0
|
|
wipe_tower = 0
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_no_sparse_layers = 0
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
xy_inner_size_compensation = 0
|
|
xy_size_compensation = 0
|
|
elefant_foot_compensation = 0.1
|
|
|
|
[print:*0.15mm*]
|
|
bottom_solid_layers = 7
|
|
top_solid_layers = 7
|
|
layer_height = 0.15
|
|
bridge_flow_ratio = 0.7
|
|
max_print_speed = 250
|
|
solid_infill_speed = 80%
|
|
|
|
[print:*0.2mm*]
|
|
bottom_solid_layers = 5
|
|
top_solid_layers = 5
|
|
layer_height = 0.2
|
|
bridge_flow_ratio = 0.8
|
|
|
|
[print:0.15mm NORMAL @RatRig]
|
|
inherits = *common*; *0.15mm*
|
|
max_print_speed = 300
|
|
bottom_solid_layers = 8
|
|
top_solid_layers = 8
|
|
|
|
[print:0.15mm HF @RatRig]
|
|
inherits = *common*; *0.15mm*
|
|
compatible_printers_condition = printer_model=~/.*VC3_.*/ and nozzle_diameter[0]==0.4
|
|
external_perimeter_speed = 140
|
|
first_layer_infill_speed = 60
|
|
first_layer_speed = 60
|
|
gap_fill_speed = 50
|
|
infill_speed = 230
|
|
ironing_speed = 15
|
|
max_print_speed = 280
|
|
max_volumetric_speed = 25
|
|
perimeter_speed = 160
|
|
small_perimeter_speed = 25
|
|
solid_infill_speed = 80%
|
|
top_solid_infill_speed = 60%
|
|
fill_pattern = cubic
|
|
|
|
[print:0.20mm NORMAL @RatRig]
|
|
inherits = *common*; *0.2mm*
|
|
fill_pattern = cubic
|
|
external_perimeter_speed = 120
|
|
infill_speed = 160
|
|
compatible_printers_condition = printer_model=~/.*VC3_.*/ and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.20mm NORMAL V-Minion @RatRig]
|
|
inherits = *common_minion*; *0.2mm*
|
|
compatible_printers_condition = printer_model=~/.*MINION.*/
|
|
bottom_solid_layers = 3
|
|
|
|
[print:0.15mm QUALITY V-Minion @RatRig]
|
|
inherits = *common_minion*; *0.15mm*
|
|
compatible_printers_condition = printer_model=~/.*MINION.*/
|
|
solid_infill_speed = 120
|
|
|
|
[print:0.20mm HF @RatRig]
|
|
inherits = 0.15mm HF @RatRig; *0.2mm*
|
|
compatible_printers_condition = printer_model=~/.*VC3_.*/
|
|
external_perimeter_speed = 140
|
|
first_layer_infill_speed = 60
|
|
first_layer_speed = 60
|
|
gap_fill_speed = 50
|
|
infill_speed = 230
|
|
ironing_speed = 15
|
|
max_print_speed = 280
|
|
max_volumetric_speed = 25
|
|
perimeter_speed = 160
|
|
small_perimeter_speed = 25
|
|
solid_infill_speed = 80%
|
|
top_solid_infill_speed = 60%
|
|
|
|
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
|
# not make it into the user interface.
|
|
|
|
# Common printer preset
|
|
[printer:*common*]
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n;{if layer_num == 2 }SET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=1{endif}\n\n
|
|
between_objects_gcode =
|
|
color_change_gcode = M600
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
default_filament_profile = "Generic PLA @RatRig"
|
|
default_print_profile = 0.20mm NORMAL @RatRig
|
|
deretract_speed = 40
|
|
end_gcode = END_PRINT\n
|
|
extra_loading_move = -2
|
|
extruder_colour = ""
|
|
gcode_flavor = marlin
|
|
high_current_on_filament_swap = 0
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n
|
|
machine_limits_usage = time_estimate_only
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 9000
|
|
machine_max_acceleration_retracting = 9000
|
|
machine_max_acceleration_travel = 9000,1250
|
|
machine_max_acceleration_x = 9000
|
|
machine_max_acceleration_y = 9000
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 10
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 5
|
|
machine_max_jerk_y = 5
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
min_layer_height = 0.05
|
|
nozzle_diameter = 0.4
|
|
parking_pos_retraction = 92
|
|
pause_print_gcode = M601
|
|
print_host =
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RatRig\nPRINTER_MODEL_VCORE\nPRINTER_HAS_Directextruder\nE3DV6
|
|
remaining_times = 1
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 1
|
|
retract_length_toolchange = 1
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 40
|
|
silent_mode = 0
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode interfering with the macro\nM109 S0 ; Prevents prusaslicer from prepending m109 to the gcode interfering with the macro\nSTART_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\n;enable this if you have a BTT Smart Filament Sensor\nSET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=0\n
|
|
thumbnails = 16x16,220x220
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 0
|
|
z_offset = 0
|
|
|
|
[printer:*vcore-klipper*]
|
|
inherits = *common*
|
|
printer_model =
|
|
printer_variant = 0.4
|
|
|
|
[printer:*vminion-klipper*]
|
|
inherits = *common*
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n;{if layer_num == 2 }SET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=1{endif}\n\n
|
|
default_filament_profile = "Generic PLA @RatRig"
|
|
default_print_profile = 0.20mm NORMAL V-Minion @RatRig
|
|
deretract_speed = 40
|
|
end_gcode = END_PRINT\n
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n
|
|
machine_limits_usage = time_estimate_only
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 9000
|
|
machine_max_acceleration_retracting = 9000
|
|
machine_max_acceleration_travel = 4000,1250
|
|
machine_max_acceleration_x = 4000
|
|
machine_max_acceleration_y = 4000
|
|
machine_max_acceleration_z = 50
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 250
|
|
machine_max_feedrate_y = 250
|
|
machine_max_feedrate_z = 10
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 5
|
|
machine_max_jerk_y = 5
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
min_layer_height = 0.05
|
|
nozzle_diameter = 0.4
|
|
parking_pos_retraction = 92
|
|
pause_print_gcode = M601
|
|
print_host =
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_RatRig\nPRINTER_MODEL_VMINION\nPRINTER_HAS_Directextruder\nE3DV6
|
|
remaining_times = 1
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 1
|
|
retract_length_toolchange = 1
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_lift_first_layer = 0
|
|
retract_lift_top = "All surfaces"
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 40
|
|
silent_mode = 0
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M190 S0 ; Prevents prusaslicer from prepending m190 to the gcode interfering with the macro\nM109 S0 ; Prevents prusaslicer from prepending m109 to the gcode interfering with the macro\nSTART_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\n;enable this if you have a BTT Smart Filament Sensor\nSET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=0\n
|
|
start_gcode_manual = 0
|
|
template_custom_gcode =
|
|
thumbnails = 16x16,220x220
|
|
thumbnails_color = #018aff
|
|
thumbnails_custom_color = 0
|
|
thumbnails_with_bed = 1
|
|
time_estimation_compensation = 100%
|
|
tool_name = ""
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 0
|
|
wipe_advanced = 0
|
|
wipe_advanced_algo = linear
|
|
wipe_advanced_multiplier = 60
|
|
wipe_advanced_nozzle_melted_volume = 120
|
|
wipe_extra_perimeter = 0
|
|
z_offset = 0
|
|
z_step = 0.00125
|
|
|
|
[printer:*0.4nozzle*]
|
|
nozzle_diameter = 0.4
|
|
max_layer_height = 0.3
|
|
min_layer_height = 0.05
|
|
retract_lift_above = 0.2
|
|
printer_variant = 0.4
|
|
|
|
[printer:RatRig V-Core-3-300]
|
|
inherits = *vcore-klipper*; *0.4nozzle*
|
|
bed_shape = 0x0,300x0,300x300,0x300
|
|
max_print_height = 300
|
|
printer_model = VC3_300
|
|
|
|
[printer:RatRig V-Core-3-400]
|
|
inherits = *vcore-klipper*; *0.4nozzle*
|
|
bed_shape = 0x0,400x0,400x400,0x400
|
|
max_print_height = 400
|
|
printer_model = VC3_400
|
|
|
|
[printer:RatRig V-Core-3-500]
|
|
inherits = *vcore-klipper*; *0.4nozzle*
|
|
bed_shape = 0x0,500x0,500x500,0x500
|
|
max_print_height = 500
|
|
printer_model = VC3_500
|
|
|
|
[printer:RatRig V-Minion-180]
|
|
inherits = *vminion-klipper*; *0.4nozzle*
|
|
bed_shape = 0x0,180x0,180x180,0x180
|
|
max_print_height = 180
|
|
printer_model = VMINION
|
|
|
|
[filament:Generic ABS @RatRig]
|
|
filament_vendor = Generic
|
|
filament_type = ABS
|
|
bed_temperature = 105
|
|
bridge_fan_speed = 30
|
|
cooling = 1
|
|
disable_fan_first_layers = 2
|
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
extrusion_multiplier = 0.98
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_colour = #3A80CA
|
|
filament_cooling_final_speed = 3.4
|
|
filament_cooling_initial_speed = 2.2
|
|
filament_cooling_moves = 4
|
|
filament_cooling_zone_pause = 0
|
|
filament_cost = 18
|
|
filament_density = 1.04
|
|
filament_deretract_speed = nil
|
|
filament_diameter = 1.75
|
|
filament_load_time = 0
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_max_speed = 0
|
|
filament_max_volumetric_speed = 0
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = ""
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_retract_layer_change = 0
|
|
filament_retract_length = 0.7
|
|
filament_soluble = 0
|
|
filament_spool_weight = 0
|
|
filament_toolchange_delay = 0
|
|
filament_toolchange_part_fan_speed = 50
|
|
filament_toolchange_temp = 200
|
|
filament_unload_time = 0
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_wipe = 1
|
|
first_layer_bed_temperature = 108
|
|
first_layer_temperature = 248
|
|
full_fan_speed_layer = 0
|
|
max_fan_speed = 30
|
|
min_fan_speed = 20
|
|
min_print_speed = 25
|
|
slowdown_below_layer_time = 10
|
|
start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0.0\nSET_PRESSURE_ADVANCE ADVANCE=0.03"
|
|
temperature = 243
|
|
|
|
[filament:Generic PETG V6 @RatRig]
|
|
filament_vendor = Generic
|
|
filament_type = PETG
|
|
bed_temperature = 80
|
|
bridge_fan_speed = 100
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
extrusion_multiplier = 0.94
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 10
|
|
filament_colour = #FF8000
|
|
filament_cost = 20
|
|
filament_density = 1.27
|
|
filament_diameter = 1.75
|
|
filament_enable_toolchange_part_fan = 0
|
|
filament_enable_toolchange_temp = 0
|
|
filament_load_time = 0
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_max_speed = 0
|
|
filament_max_volumetric_speed = 11
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = ""
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_retract_layer_change = 1
|
|
filament_retract_length = 1.2
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
filament_spool_weight = 0
|
|
filament_unload_time = 0
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_wipe = 1
|
|
first_layer_bed_temperature = 80
|
|
first_layer_temperature = 240
|
|
full_fan_speed_layer = 0
|
|
max_fan_speed = 100
|
|
min_fan_speed = 40
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 10
|
|
start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0\nSET_PRESSURE_ADVANCE ADVANCE=0.05"
|
|
temperature = 235
|
|
|
|
[filament:Generic PETG HF @RatRig]
|
|
inherits = Generic PETG V6 @RatRig
|
|
temperature = 235
|
|
first_layer_temperature = 235
|
|
filament_max_volumetric_speed = 25
|
|
|
|
[filament:Generic PLA @RatRig]
|
|
filament_vendor = Generic
|
|
filament_type = PLA
|
|
bed_temperature = 65
|
|
bridge_fan_speed = 100
|
|
cooling = 1
|
|
disable_fan_first_layers = 2
|
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
extrusion_multiplier = 0.89
|
|
fan_always_on = 1
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FF3232
|
|
filament_cooling_final_speed = 3.4
|
|
filament_cooling_initial_speed = 2.2
|
|
filament_cooling_moves = 4
|
|
filament_cooling_zone_pause = 0
|
|
filament_cost = 20
|
|
filament_density = 1.24
|
|
filament_deretract_speed = nil
|
|
filament_diameter = 1.75
|
|
filament_load_time = 0
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_max_speed = 0
|
|
filament_max_volumetric_speed = 0
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = ""
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_retract_length = 0.6
|
|
filament_soluble = 0
|
|
filament_spool_weight = 0
|
|
filament_toolchange_delay = 0
|
|
filament_unload_time = 0
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_wipe = nil
|
|
first_layer_bed_temperature = 68
|
|
first_layer_temperature = 205
|
|
full_fan_speed_layer = 4
|
|
inherits =
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
min_print_speed = 10
|
|
slowdown_below_layer_time = 15
|
|
start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0\nSET_PRESSURE_ADVANCE ADVANCE=0.05"
|
|
temperature = 195
|
|
|
|
[filament:Esun ePA-CF @RatRig]
|
|
filament_vendor = Esun
|
|
filament_type = NYLON
|
|
bed_temperature = 80
|
|
bridge_fan_speed = 50
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
external_perimeter_fan_speed = 0
|
|
extrusion_multiplier = 0.98
|
|
fan_always_on = 0
|
|
fan_below_layer_time = 10
|
|
filament_colour = #3A80CA
|
|
filament_cooling_final_speed = 3.4
|
|
filament_cooling_initial_speed = 2.2
|
|
filament_cooling_moves = 4
|
|
filament_cooling_zone_pause = 0
|
|
filament_cost = 60
|
|
filament_density = 1.24
|
|
filament_diameter = 1.75
|
|
filament_load_time = 0
|
|
filament_loading_speed = 28
|
|
filament_loading_speed_start = 3
|
|
filament_max_speed = 0
|
|
filament_max_volumetric_speed = 4
|
|
filament_minimal_purge_on_wipe_tower = 15
|
|
filament_notes = ""
|
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
filament_retract_length = 2
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
filament_spool_weight = 0
|
|
filament_unload_time = 0
|
|
filament_unloading_speed = 90
|
|
filament_unloading_speed_start = 100
|
|
filament_wipe = 1
|
|
first_layer_bed_temperature = 80
|
|
first_layer_temperature = 270
|
|
full_fan_speed_layer = 0
|
|
inherits =
|
|
max_fan_speed = 15
|
|
min_fan_speed = 0
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 10
|
|
start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0.0\n\n{if nozzle_diameter[0]==0.4} SET_PRESSURE_ADVANCE ADVANCE=0.045{elsif nozzle_diameter[0]==0.6}SET_PRESSURE_ADVANCE ADVANCE=0.02{endif}\n\n"
|
|
temperature = 270 |