183 lines
7.6 KiB
Perl
Executable File
183 lines
7.6 KiB
Perl
Executable File
#!/usr/bin/perl
|
|
|
|
use strict;
|
|
use warnings;
|
|
|
|
BEGIN {
|
|
use FindBin;
|
|
use lib "$FindBin::Bin/lib";
|
|
}
|
|
|
|
use Getopt::Long;
|
|
use Slic3r;
|
|
use XXX;
|
|
$|++;
|
|
|
|
my %opt = ();
|
|
my %cli_options = ();
|
|
{
|
|
my %options = (
|
|
'help' => sub { usage() },
|
|
|
|
'debug' => \$Slic3r::debug,
|
|
'o|output=s' => \$opt{output},
|
|
'close-after-slicing' => \$opt{close_after_slicing},
|
|
|
|
'save=s' => \$opt{save},
|
|
'load=s' => \$opt{load},
|
|
);
|
|
foreach my $opt_key (keys %$Slic3r::Config::Options) {
|
|
my $opt = $Slic3r::Config::Options->{$opt_key};
|
|
$options{ $opt->{cli} } = \$cli_options{$opt_key}
|
|
if $opt->{cli};
|
|
}
|
|
|
|
GetOptions(%options) or usage(1);
|
|
}
|
|
|
|
# load configuration
|
|
if ($opt{load}) {
|
|
-e $opt{load} or die "Cannot find specified configuration file.\n";
|
|
Slic3r::Config->load($opt{load});
|
|
}
|
|
|
|
# validate command line options
|
|
Slic3r::Config->validate_cli(\%cli_options);
|
|
|
|
# apply command line options
|
|
Slic3r::Config->set($_ => $cli_options{$_})
|
|
for grep defined $cli_options{$_}, keys %cli_options;
|
|
|
|
# validate configuration
|
|
Slic3r::Config->validate;
|
|
|
|
# save configuration
|
|
Slic3r::Config->save($opt{save}) if $opt{save};
|
|
|
|
# start GUI
|
|
if (!@ARGV && !$opt{save} && eval "require Slic3r::GUI; 1") {
|
|
Slic3r::GUI->new->MainLoop;
|
|
exit;
|
|
}
|
|
|
|
if ($ARGV[0]) {
|
|
|
|
# skein
|
|
my $input_file = $ARGV[0];
|
|
|
|
my $skein = Slic3r::Skein->new(
|
|
input_file => $input_file,
|
|
output_file => $opt{output},
|
|
);
|
|
$skein->go;
|
|
|
|
} else {
|
|
usage(1) unless $opt{save};
|
|
}
|
|
|
|
sub usage {
|
|
my ($exit_code) = @_;
|
|
|
|
print <<"EOF";
|
|
Slic3r $Slic3r::VERSION is a STL-to-GCODE translator for RepRap 3D printers
|
|
written by Alessandro Ranellucci <aar\@cpan.org> - http://slic3r.org/
|
|
|
|
Usage: slic3r.pl [ OPTIONS ] file.stl
|
|
|
|
--help Output this usage screen and exit
|
|
--save <file> Save configuration to the specified file
|
|
--load <file> Load configuration from the specified file
|
|
-o, --output File to output gcode to (default: <inputfile>.gcode)
|
|
|
|
Printer options:
|
|
--nozzle-diameter Diameter of nozzle in mm (default: $Slic3r::nozzle_diameter)
|
|
--print-center Coordinates of the point to center the print around
|
|
(default: $Slic3r::print_center->[0],$Slic3r::print_center->[1])
|
|
--use-relative-e-distances
|
|
Use relative distances for extrusion in GCODE output
|
|
--extrusion-axis The axis used for extrusion; leave empty to disable extrusion
|
|
(default: $Slic3r::extrusion_axis)
|
|
--z-offset Additional height in mm to add to vertical coordinates
|
|
(+/-, default: $Slic3r::z_offset)
|
|
--gcode-arcs Use G2/G3 commands for native arcs (experimental, not supported
|
|
by all firmwares)
|
|
--g0 Use G0 commands for retraction (experimenta, not supported by all
|
|
firmwares)
|
|
|
|
Filament options:
|
|
--filament-diameter Diameter in mm of your raw filament (default: $Slic3r::filament_diameter)
|
|
--extrusion-multiplier
|
|
Change this to alter the amount of plastic extruded. There should be
|
|
very little need to change this value, which is only useful to
|
|
compensate for filament packing (default: $Slic3r::extrusion_multiplier)
|
|
--temperature Extrusion temperature, set 0 to disable (default: $Slic3r::temperature)
|
|
|
|
Speed options:
|
|
--travel-speed Speed of non-print moves in mm/sec (default: $Slic3r::travel_speed)
|
|
--perimeter-speed Speed of print moves for perimeters in mm/sec (default: $Slic3r::perimeter_speed)
|
|
--small-perimeter-speed
|
|
Speed of print moves for small perimeters in mm/sec (default: $Slic3r::small_perimeter_speed)
|
|
--infill-speed Speed of print moves in mm/sec (default: $Slic3r::infill_speed)
|
|
--solid-infill-speed Speed of print moves for solid surfaces in mm/sec (default: $Slic3r::solid_infill_speed)
|
|
--bridge-speed Speed of bridge print moves in mm/sec (default: $Slic3r::bridge_speed)
|
|
--bottom-layer-speed-ratio
|
|
Factor to increase/decrease speeds on bottom
|
|
layer by (default: $Slic3r::bottom_layer_speed_ratio)
|
|
|
|
Accuracy options:
|
|
--layer-height Layer height in mm (default: $Slic3r::layer_height)
|
|
--first-layer-height-ratio
|
|
Multiplication factor for the height to slice and print the first
|
|
layer with (> 0, default: $Slic3r::first_layer_height_ratio)
|
|
--infill-every-layers
|
|
Infill every N layers (default: $Slic3r::infill_every_layers)
|
|
--extrusion-width-ratio
|
|
Calculate the extrusion width as the layer height multiplied by
|
|
this value (> 0, default: calculated automatically)
|
|
--bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: $Slic3r::bridge_flow_ratio)
|
|
|
|
Print options:
|
|
--perimeters Number of perimeters/horizontal skins (range: 1+,
|
|
default: $Slic3r::perimeters)
|
|
--solid-layers Number of solid layers to do for top/bottom surfaces
|
|
(range: 1+, default: $Slic3r::solid_layers)
|
|
--fill-density Infill density (range: 0-1, default: $Slic3r::fill_density)
|
|
--fill-angle Infill angle in degrees (range: 0-90, default: $Slic3r::fill_angle)
|
|
--fill-pattern Pattern to use to fill non-solid layers (default: $Slic3r::fill_pattern)
|
|
--solid-fill-pattern Pattern to use to fill solid layers (default: $Slic3r::solid_fill_pattern)
|
|
--start-gcode Load initial gcode from the supplied file. This will overwrite
|
|
the default command (home all axes [G28]).
|
|
--end-gcode Load final gcode from the supplied file. This will overwrite
|
|
the default commands (turn off temperature [M104 S0],
|
|
home X axis [G28 X], disable motors [M84]).
|
|
|
|
Retraction options:
|
|
--retract-length Length of retraction in mm when pausing extrusion
|
|
(default: $Slic3r::retract_length)
|
|
--retract-speed Speed for retraction in mm/sec (default: $Slic3r::retract_speed)
|
|
--retract-restart-extra
|
|
Additional amount of filament in mm to push after
|
|
compensating retraction (default: $Slic3r::retract_restart_extra)
|
|
--retract-before-travel
|
|
Only retract before travel moves of this length (default: $Slic3r::retract_before_travel)
|
|
--retract-lift Lift Z by the given distance in mm when retracting (default: $Slic3r::retract_lift)
|
|
|
|
Skirt options:
|
|
--skirts Number of skirts to draw (default: $Slic3r::skirts)
|
|
--skirt-distance Distance in mm between innermost skirt and object
|
|
(default: $Slic3r::skirt_distance)
|
|
--skirt-height Height of skirts to draw (expressed in layers, default: $Slic3r::skirt_height)
|
|
|
|
Transform options:
|
|
--scale Factor for scaling input object (default: $Slic3r::scale)
|
|
--rotate Rotation angle in degrees (0-360, default: $Slic3r::rotate)
|
|
--duplicate-x Number of items along X axis (1+, default: $Slic3r::duplicate_x)
|
|
--duplicate-y Number of items along Y axis (1+, default: $Slic3r::duplicate_y)
|
|
--duplicate-distance Distance in mm between copies (default: $Slic3r::duplicate_distance)
|
|
|
|
EOF
|
|
exit ($exit_code || 0);
|
|
}
|
|
|
|
__END__
|