71b1e09af9
"filament_load_time" and "filament_unload_time" values to match the MK3 MMU2 behavior. Emitting of the remaining times into the output G-code was made optional through a new "remaining_times" configuration value, so the firmware flavors and versions, which do not know the M73 code, will not complain. Configuration changes: The wipe tower default position was shifted inwards after the wipe tower coordinate reference point was changed from the center to the left front corner. Added the "filament_load_time" and "filament_unload_time" values to the MK3 MMU filament profiles. Enabled "remaining_times" for the MK2.5, MK3 and MK3MMU2 printers.
26 lines
1.3 KiB
Plaintext
26 lines
1.3 KiB
Plaintext
min_slic3r_version = 1.41.0-alpha
|
|
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
|
0.2.0-alpha7 Fixed the *MK3* references
|
|
0.2.0-alpha6
|
|
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
|
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
|
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
|
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
|
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
|
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
|
min_slic3r_version = 1.40.0
|
|
0.1.11 fw version changed to 3.3.1
|
|
0.1.10 MK3 jerk and acceleration update
|
|
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
|
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
|
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
|
0.1.6 Split the MK2.5 profile from the MK2S
|
|
min_slic3r_version = 1.40.0-beta
|
|
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
|
0.1.4 edited fw version, added z-raise after print
|
|
min_slic3r_version = 1.40.0-alpha
|
|
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
|
0.1.2 Wipe tower changes
|
|
0.1.1 Minor print speed adjustments
|
|
0.1.0 Initial
|