3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a7b4b232e9
PrusaSlicer-NonPlainar/src/slic3r/GUI/ConfigWizard.cpp

1842 lines
64 KiB
C++
Raw Blame History

// FIXME: extract absolute units -> em
#include "ConfigWizard_private.hpp"
#include <algorithm>
#include <numeric>
#include <utility>
#include <unordered_map>
#include <stdexcept>
#include <boost/format.hpp>
#include <boost/log/trivial.hpp>
#include <boost/algorithm/string/predicate.hpp>
#include <wx/settings.h>
#include <wx/stattext.h>
#include <wx/textctrl.h>
#include <wx/dcclient.h>
#include <wx/statbmp.h>
#include <wx/checkbox.h>
#include <wx/statline.h>
#include <wx/dataview.h>
#include <wx/notebook.h>
#include <wx/display.h>
#include <wx/filefn.h>
#include <wx/wupdlock.h>
#include <wx/debug.h>
#include "libslic3r/Utils.hpp"
#include "GUI.hpp"
#include "GUI_Utils.hpp"
#include "slic3r/Config/Snapshot.hpp"
#include "slic3r/Utils/PresetUpdater.hpp"
namespace Slic3r {
namespace GUI {
using Config::Snapshot;
using Config::SnapshotDB;
// Configuration data structures extensions needed for the wizard
Bundle::Bundle(fs::path source_path, bool is_in_resources, bool is_prusa_bundle)
: preset_bundle(new PresetBundle)
, vendor_profile(nullptr)
, is_in_resources(is_in_resources)
, is_prusa_bundle(is_prusa_bundle)
{
preset_bundle->load_configbundle(source_path.string(), PresetBundle::LOAD_CFGBNDLE_SYSTEM);
auto first_vendor = preset_bundle->vendors.begin();
wxCHECK_RET(first_vendor != preset_bundle->vendors.end(), "Failed to load preset bundle");
vendor_profile = &first_vendor->second;
}
Bundle::Bundle(Bundle &&other)
: preset_bundle(std::move(other.preset_bundle))
, vendor_profile(other.vendor_profile)
, is_in_resources(other.is_in_resources)
, is_prusa_bundle(other.is_prusa_bundle)
{
other.vendor_profile = nullptr;
}
BundleMap BundleMap::load()
{
BundleMap res;
const auto vendor_dir = (boost::filesystem::path(Slic3r::data_dir()) / "vendor").make_preferred();
const auto rsrc_vendor_dir = (boost::filesystem::path(resources_dir()) / "profiles").make_preferred();
auto prusa_bundle_path = (vendor_dir / PresetBundle::PRUSA_BUNDLE).replace_extension(".ini");
auto prusa_bundle_rsrc = false;
if (! boost::filesystem::exists(prusa_bundle_path)) {
prusa_bundle_path = (rsrc_vendor_dir / PresetBundle::PRUSA_BUNDLE).replace_extension(".ini");
prusa_bundle_rsrc = true;
}
Bundle prusa_bundle(std::move(prusa_bundle_path), prusa_bundle_rsrc, true);
res.emplace(PresetBundle::PRUSA_BUNDLE, std::move(prusa_bundle));
// Load the other bundles in the datadir/vendor directory
// and then additionally from resources/profiles.
bool is_in_resources = false;
for (auto dir : { &vendor_dir, &rsrc_vendor_dir }) {
for (const auto &dir_entry : boost::filesystem::directory_iterator(*dir)) {
if (Slic3r::is_ini_file(dir_entry)) {
std::string id = dir_entry.path().stem().string(); // stem() = filename() without the trailing ".ini" part
// Don't load this bundle if we've already loaded it.
if (res.find(id) != res.end()) { continue; }
Bundle bundle(dir_entry.path(), is_in_resources);
res.emplace(std::move(id), std::move(bundle));
}
}
is_in_resources = true;
}
return res;
}
Bundle& BundleMap::prusa_bundle()
{
auto it = find(PresetBundle::PRUSA_BUNDLE);
if (it == end()) {
throw std::runtime_error("ConfigWizard: Internal error in BundleMap: PRUSA_BUNDLE not loaded");
}
return it->second;
}
const Bundle& BundleMap::prusa_bundle() const
{
return const_cast<BundleMap*>(this)->prusa_bundle();
}
// Printer model picker GUI control
struct PrinterPickerEvent : public wxEvent
{
std::string vendor_id;
std::string model_id;
std::string variant_name;
bool enable;
PrinterPickerEvent(wxEventType eventType, int winid, std::string vendor_id, std::string model_id, std::string variant_name, bool enable)
: wxEvent(winid, eventType)
, vendor_id(std::move(vendor_id))
, model_id(std::move(model_id))
, variant_name(std::move(variant_name))
, enable(enable)
{}
virtual wxEvent *Clone() const
{
return new PrinterPickerEvent(*this);
}
};
wxDEFINE_EVENT(EVT_PRINTER_PICK, PrinterPickerEvent);
const std::string PrinterPicker::PRINTER_PLACEHOLDER = "printer_placeholder.png";
PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxString title, size_t max_cols, const AppConfig &appconfig, const ModelFilter &filter)
: wxPanel(parent)
, vendor_id(vendor.id)
, width(0)
{
const auto &models = vendor.models;
auto *sizer = new wxBoxSizer(wxVERTICAL);
const auto font_title = GetFont().MakeBold().Scaled(1.3f);
const auto font_name = GetFont().MakeBold();
const auto font_alt_nozzle = GetFont().Scaled(0.9f);
// wxGrid appends widgets by rows, but we need to construct them in columns.
// These vectors are used to hold the elements so that they can be appended in the right order.
std::vector<wxStaticText*> titles;
std::vector<wxStaticBitmap*> bitmaps;
std::vector<wxPanel*> variants_panels;
int max_row_width = 0;
int current_row_width = 0;
for (const auto &model : models) {
if (! filter(model)) { continue; }
wxBitmap bitmap;
int bitmap_width = 0;
const wxString bitmap_file = GUI::from_u8(Slic3r::var((boost::format("printers/%1%_%2%.png") % vendor.id % model.id).str()));
if (wxFileExists(bitmap_file)) {
bitmap.LoadFile(bitmap_file, wxBITMAP_TYPE_PNG);
bitmap_width = bitmap.GetWidth();
} else {
BOOST_LOG_TRIVIAL(warning) << boost::format("Can't find bitmap file `%1%` for vendor `%2%`, printer `%3%`, using placeholder icon instead")
% bitmap_file
% vendor.id
% model.id;
const wxString placeholder_file = GUI::from_u8(Slic3r::var(PRINTER_PLACEHOLDER));
if (wxFileExists(placeholder_file)) {
bitmap.LoadFile(placeholder_file, wxBITMAP_TYPE_PNG);
bitmap_width = bitmap.GetWidth();
}
}
auto *title = new wxStaticText(this, wxID_ANY, model.name, wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
title->SetFont(font_name);
const int wrap_width = std::max((int)MODEL_MIN_WRAP, bitmap_width);
title->Wrap(wrap_width);
current_row_width += wrap_width;
if (titles.size() % max_cols == max_cols - 1) {
max_row_width = std::max(max_row_width, current_row_width);
current_row_width = 0;
}
titles.push_back(title);
auto *bitmap_widget = new wxStaticBitmap(this, wxID_ANY, bitmap);
bitmaps.push_back(bitmap_widget);
auto *variants_panel = new wxPanel(this);
auto *variants_sizer = new wxBoxSizer(wxVERTICAL);
variants_panel->SetSizer(variants_sizer);
const auto model_id = model.id;
for (size_t i = 0; i < model.variants.size(); i++) {
const auto &variant = model.variants[i];
const auto label = model.technology == ptFFF
? wxString::Format("%s %s %s", variant.name, _(L("mm")), _(L("nozzle")))
: from_u8(model.name);
if (i == 1) {
auto *alt_label = new wxStaticText(variants_panel, wxID_ANY, _(L("Alternate nozzles:")));
alt_label->SetFont(font_alt_nozzle);
variants_sizer->Add(alt_label, 0, wxBOTTOM, 3);
}
auto *cbox = new Checkbox(variants_panel, label, model_id, variant.name);
i == 0 ? cboxes.push_back(cbox) : cboxes_alt.push_back(cbox);
const bool enabled = appconfig.get_variant(vendor.id, model_id, variant.name);
cbox->SetValue(enabled);
variants_sizer->Add(cbox, 0, wxBOTTOM, 3);
cbox->Bind(wxEVT_CHECKBOX, [this, cbox](wxCommandEvent &event) {
on_checkbox(cbox, event.IsChecked());
});
}
variants_panels.push_back(variants_panel);
}
width = std::max(max_row_width, current_row_width);
const size_t cols = std::min(max_cols, titles.size());
auto *printer_grid = new wxFlexGridSizer(cols, 0, 20);
printer_grid->SetFlexibleDirection(wxVERTICAL | wxHORIZONTAL);
if (titles.size() > 0) {
const size_t odd_items = titles.size() % cols;
for (size_t i = 0; i < titles.size() - odd_items; i += cols) {
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(titles[j], 0, wxBOTTOM, 3); }
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(bitmaps[j], 0, wxBOTTOM, 20); }
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(variants_panels[j]); }
// Add separator space
if (i > 0) {
for (size_t j = i; j < i + cols; j++) { printer_grid->Add(1, 100); }
}
}
if (odd_items > 0) {
for (size_t i = 0; i < cols; i++) { printer_grid->Add(1, 100); }
const size_t rem = titles.size() - odd_items;
for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(titles[i], 0, wxBOTTOM, 3); }
for (size_t i = 0; i < cols - odd_items; i++) { printer_grid->AddSpacer(1); }
for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(bitmaps[i], 0, wxBOTTOM, 20); }
for (size_t i = 0; i < cols - odd_items; i++) { printer_grid->AddSpacer(1); }
for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(variants_panels[i]); }
}
}
auto *title_sizer = new wxBoxSizer(wxHORIZONTAL);
if (! title.IsEmpty()) {
auto *title_widget = new wxStaticText(this, wxID_ANY, title);
title_widget->SetFont(font_title);
title_sizer->Add(title_widget);
}
title_sizer->AddStretchSpacer();
if (titles.size() > 1) {
// It only makes sense to add the All / None buttons if there's multiple printers
auto *sel_all_std = new wxButton(this, wxID_ANY, _(L("All standard")));
auto *sel_all = new wxButton(this, wxID_ANY, _(L("All")));
auto *sel_none = new wxButton(this, wxID_ANY, _(L("None")));
sel_all_std->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->select_all(true, false); });
sel_all->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->select_all(true, true); });
sel_none->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->select_all(false); });
title_sizer->Add(sel_all_std, 0, wxRIGHT, BTN_SPACING);
title_sizer->Add(sel_all, 0, wxRIGHT, BTN_SPACING);
title_sizer->Add(sel_none);
// fill button indexes used later for buttons rescaling
m_button_indexes = { sel_all_std->GetId(), sel_all->GetId(), sel_none->GetId() };
}
sizer->Add(title_sizer, 0, wxEXPAND | wxBOTTOM, BTN_SPACING);
sizer->Add(printer_grid);
SetSizer(sizer);
}
PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxString title, size_t max_cols, const AppConfig &appconfig)
: PrinterPicker(parent, vendor, std::move(title), max_cols, appconfig, [](const VendorProfile::PrinterModel&) { return true; })
{}
void PrinterPicker::select_all(bool select, bool alternates)
{
for (const auto &cb : cboxes) {
if (cb->GetValue() != select) {
cb->SetValue(select);
on_checkbox(cb, select);
}
}
if (! select) { alternates = false; }
for (const auto &cb : cboxes_alt) {
if (cb->GetValue() != alternates) {
cb->SetValue(alternates);
on_checkbox(cb, alternates);
}
}
}
void PrinterPicker::select_one(size_t i, bool select)
{
if (i < cboxes.size() && cboxes[i]->GetValue() != select) {
cboxes[i]->SetValue(select);
on_checkbox(cboxes[i], select);
}
}
bool PrinterPicker::any_selected() const
{
for (const auto &cb : cboxes) {
if (cb->GetValue()) { return true; }
}
for (const auto &cb : cboxes_alt) {
if (cb->GetValue()) { return true; }
}
return false;
}
void PrinterPicker::on_checkbox(const Checkbox *cbox, bool checked)
{
PrinterPickerEvent evt(EVT_PRINTER_PICK, GetId(), vendor_id, cbox->model, cbox->variant, checked);
AddPendingEvent(evt);
}
// Wizard page base
ConfigWizardPage::ConfigWizardPage(ConfigWizard *parent, wxString title, wxString shortname, unsigned indent)
: wxPanel(parent->p->hscroll)
, parent(parent)
, shortname(std::move(shortname))
, indent(indent)
{
auto *sizer = new wxBoxSizer(wxVERTICAL);
auto *text = new wxStaticText(this, wxID_ANY, std::move(title), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
const auto font = GetFont().MakeBold().Scaled(1.5);
text->SetFont(font);
sizer->Add(text, 0, wxALIGN_LEFT, 0);
sizer->AddSpacer(10);
content = new wxBoxSizer(wxVERTICAL);
sizer->Add(content, 1);
SetSizer(sizer);
this->Hide();
Bind(wxEVT_SIZE, [this](wxSizeEvent &event) {
this->Layout();
event.Skip();
});
}
ConfigWizardPage::~ConfigWizardPage() {}
wxStaticText* ConfigWizardPage::append_text(wxString text)
{
auto *widget = new wxStaticText(this, wxID_ANY, text, wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
widget->Wrap(WRAP_WIDTH);
widget->SetMinSize(wxSize(WRAP_WIDTH, -1));
append(widget);
return widget;
}
void ConfigWizardPage::append_spacer(int space)
{
// FIXME: scaling
content->AddSpacer(space);
}
// Wizard pages
PageWelcome::PageWelcome(ConfigWizard *parent)
: ConfigWizardPage(parent, wxString::Format(
#ifdef __APPLE__
_(L("Welcome to the %s Configuration Assistant"))
#else
_(L("Welcome to the %s Configuration Wizard"))
#endif
, SLIC3R_APP_NAME), _(L("Welcome")))
, welcome_text(append_text(wxString::Format(
_(L("Hello, welcome to %s! This %s helps you with the initial configuration; just a few settings and you will be ready to print.")),
SLIC3R_APP_NAME,
ConfigWizard::name())
))
, cbox_reset(append(
new wxCheckBox(this, wxID_ANY, _(L("Remove user profiles - install from scratch (a snapshot will be taken beforehand)")))
))
{
welcome_text->Hide();
cbox_reset->Hide();
}
void PageWelcome::set_run_reason(ConfigWizard::RunReason run_reason)
{
const bool data_empty = run_reason == ConfigWizard::RR_DATA_EMPTY;
welcome_text->Show(data_empty);
cbox_reset->Show(!data_empty);
}
PagePrinters::PagePrinters(ConfigWizard *parent,
wxString title,
wxString shortname,
const VendorProfile &vendor,
unsigned indent,
Technology technology)
: ConfigWizardPage(parent, std::move(title), std::move(shortname), indent)
, technology(technology)
, install(false) // only used for 3rd party vendors
{
enum {
COL_SIZE = 200,
};
AppConfig *appconfig = &this->wizard_p()->appconfig_new;
const auto families = vendor.families();
for (const auto &family : families) {
const auto filter = [&](const VendorProfile::PrinterModel &model) {
return ((model.technology == ptFFF && technology & T_FFF)
|| (model.technology == ptSLA && technology & T_SLA))
&& model.family == family;
};
if (std::find_if(vendor.models.begin(), vendor.models.end(), filter) == vendor.models.end()) {
continue;
}
const auto picker_title = family.empty() ? wxString() : wxString::Format(_(L("%s Family")), family);
auto *picker = new PrinterPicker(this, vendor, picker_title, MAX_COLS, *appconfig, filter);
picker->Bind(EVT_PRINTER_PICK, [this, appconfig](const PrinterPickerEvent &evt) {
appconfig->set_variant(evt.vendor_id, evt.model_id, evt.variant_name, evt.enable);
wizard_p()->on_printer_pick(this, evt);
});
append(new wxStaticLine(this));
append(picker);
printer_pickers.push_back(picker);
}
}
void PagePrinters::select_all(bool select, bool alternates)
{
for (auto picker : printer_pickers) {
picker->select_all(select, alternates);
}
}
int PagePrinters::get_width() const
{
return std::accumulate(printer_pickers.begin(), printer_pickers.end(), 0,
[](int acc, const PrinterPicker *picker) { return std::max(acc, picker->get_width()); });
}
bool PagePrinters::any_selected() const
{
for (const auto *picker : printer_pickers) {
if (picker->any_selected()) { return true; }
}
return false;
}
void PagePrinters::set_run_reason(ConfigWizard::RunReason run_reason)
{
if (technology == T_FFF
&& (run_reason == ConfigWizard::RR_DATA_EMPTY || run_reason == ConfigWizard::RR_DATA_LEGACY)
&& printer_pickers.size() > 0) {
printer_pickers[0]->select_one(0, true);
}
}
const std::string PageMaterials::EMPTY;
PageMaterials::PageMaterials(ConfigWizard *parent, Materials *materials, wxString title, wxString shortname, wxString list1name)
: ConfigWizardPage(parent, std::move(title), std::move(shortname))
, materials(materials)
, list_l1(new StringList(this))
, list_l2(new StringList(this))
, list_l3(new PresetList(this))
{
append_spacer(VERTICAL_SPACING);
const int em = parent->em_unit();
const int list_h = 30*em;
list_l1->SetMinSize(wxSize(8*em, list_h));
list_l2->SetMinSize(wxSize(13*em, list_h));
list_l3->SetMinSize(wxSize(25*em, list_h));
auto *grid = new wxFlexGridSizer(3, 0, em);
grid->Add(new wxStaticText(this, wxID_ANY, list1name));
grid->Add(new wxStaticText(this, wxID_ANY, _(L("Vendor:"))));
grid->Add(new wxStaticText(this, wxID_ANY, _(L("Profile:"))));
grid->Add(list_l1);
grid->Add(list_l2);
grid->Add(list_l3);
auto *btn_sizer = new wxBoxSizer(wxHORIZONTAL);
auto *sel_all = new wxButton(this, wxID_ANY, _(L("All")));
auto *sel_none = new wxButton(this, wxID_ANY, _(L("None")));
btn_sizer->Add(sel_all, 0, wxRIGHT, em / 2);
btn_sizer->Add(sel_none);
grid->Add(new wxBoxSizer(wxHORIZONTAL));
grid->Add(new wxBoxSizer(wxHORIZONTAL));
grid->Add(btn_sizer, 0, wxALIGN_RIGHT);
append(grid);
list_l1->Bind(wxEVT_LISTBOX, [this](wxCommandEvent &) {
update_lists(list_l1->GetSelection(), list_l2->GetSelection());
});
list_l2->Bind(wxEVT_LISTBOX, [this](wxCommandEvent &) {
update_lists(list_l1->GetSelection(), list_l2->GetSelection());
});
list_l3->Bind(wxEVT_CHECKLISTBOX, [this](wxCommandEvent &evt) { select_material(evt.GetInt()); });
sel_all->Bind(wxEVT_BUTTON, [this](wxCommandEvent &) { select_all(true); });
sel_none->Bind(wxEVT_BUTTON, [this](wxCommandEvent &) { select_all(false); });
reload_presets();
}
void PageMaterials::reload_presets()
{
clear();
list_l1->append(_(L("(All)")), &EMPTY);
for (const std::string &type : materials->types) {
list_l1->append(type, &type);
}
if (list_l1->GetCount() > 0) {
list_l1->SetSelection(0);
sel1_prev = wxNOT_FOUND;
sel2_prev = wxNOT_FOUND;
update_lists(0, 0);
}
presets_loaded = true;
}
void PageMaterials::update_lists(int sel1, int sel2)
{
wxWindowUpdateLocker freeze_guard(this);
(void)freeze_guard;
if (sel1 != sel1_prev) {
// Refresh the second list
// XXX: The vendor list is created with quadratic complexity here,
// but the number of vendors is going to be very small this shouldn't be a problem.
list_l2->Clear();
list_l2->append(_(L("(All)")), &EMPTY);
if (sel1 != wxNOT_FOUND) {
const std::string &type = list_l1->get_data(sel1);
materials->filter_presets(type, EMPTY, [this](const Preset *p) {
const std::string &vendor = this->materials->get_vendor(p);
if (list_l2->find(vendor) == wxNOT_FOUND) {
list_l2->append(vendor, &vendor);
}
});
}
sel1_prev = sel1;
sel2 = 0;
sel2_prev = wxNOT_FOUND;
list_l2->SetSelection(sel2);
list_l3->Clear();
}
if (sel2 != sel2_prev) {
// Refresh the third list
list_l3->Clear();
if (sel1 != wxNOT_FOUND && sel2 != wxNOT_FOUND) {
const std::string &type = list_l1->get_data(sel1);
const std::string &vendor = list_l2->get_data(sel2);
materials->filter_presets(type, vendor, [this](const Preset *p) {
const int i = list_l3->append(p->name, p);
const bool checked = wizard_p()->appconfig_new.has(materials->appconfig_section(), p->name);
list_l3->Check(i, checked);
});
}
sel2_prev = sel2;
}
}
void PageMaterials::select_material(int i)
{
const bool checked = list_l3->IsChecked(i);
const Preset &preset = list_l3->get_data(i);
if (checked) {
wizard_p()->appconfig_new.set(materials->appconfig_section(), preset.name, "1");
} else {
wizard_p()->appconfig_new.erase(materials->appconfig_section(), preset.name);
}
}
void PageMaterials::select_all(bool select)
{
wxWindowUpdateLocker freeze_guard(this);
(void)freeze_guard;
for (unsigned i = 0; i < list_l3->GetCount(); i++) {
const bool current = list_l3->IsChecked(i);
if (current != select) {
list_l3->Check(i, select);
select_material(i);
}
}
}
void PageMaterials::clear()
{
list_l1->Clear();
list_l2->Clear();
list_l3->Clear();
sel1_prev = wxNOT_FOUND;
sel2_prev = wxNOT_FOUND;
presets_loaded = false;
}
void PageMaterials::on_activate()
{
if (! presets_loaded) {
wizard_p()->update_materials(materials->technology);
reload_presets();
}
}
const char *PageCustom::default_profile_name = "My Settings";
PageCustom::PageCustom(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("Custom Printer Setup")), _(L("Custom Printer")))
{
cb_custom = new wxCheckBox(this, wxID_ANY, _(L("Define a custom printer profile")));
tc_profile_name = new wxTextCtrl(this, wxID_ANY, default_profile_name);
auto *label = new wxStaticText(this, wxID_ANY, _(L("Custom profile name:")));
tc_profile_name->Enable(false);
tc_profile_name->Bind(wxEVT_KILL_FOCUS, [this](wxFocusEvent &evt) {
if (tc_profile_name->GetValue().IsEmpty()) {
if (profile_name_prev.IsEmpty()) { tc_profile_name->SetValue(default_profile_name); }
else { tc_profile_name->SetValue(profile_name_prev); }
} else {
profile_name_prev = tc_profile_name->GetValue();
}
evt.Skip();
});
cb_custom->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) {
tc_profile_name->Enable(custom_wanted());
wizard_p()->on_custom_setup();
});
append(cb_custom);
append(label);
append(tc_profile_name);
}
PageUpdate::PageUpdate(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("Automatic updates")), _(L("Updates")))
, version_check(true)
, preset_update(true)
{
const AppConfig *app_config = wxGetApp().app_config;
auto boldfont = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
boldfont.SetWeight(wxFONTWEIGHT_BOLD);
auto *box_slic3r = new wxCheckBox(this, wxID_ANY, _(L("Check for application updates")));
box_slic3r->SetValue(app_config->get("version_check") == "1");
append(box_slic3r);
append_text(wxString::Format(_(L(
"If enabled, %s checks for new application versions online. When a new version becomes available, "
"a notification is displayed at the next application startup (never during program usage). "
"This is only a notification mechanisms, no automatic installation is done.")), SLIC3R_APP_NAME));
append_spacer(VERTICAL_SPACING);
auto *box_presets = new wxCheckBox(this, wxID_ANY, _(L("Update built-in Presets automatically")));
box_presets->SetValue(app_config->get("preset_update") == "1");
append(box_presets);
append_text(wxString::Format(_(L(
"If enabled, %s downloads updates of built-in system presets in the background."
"These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application startup.")), SLIC3R_APP_NAME));
const auto text_bold = _(L("Updates are never applied without user's consent and never overwrite user's customized settings."));
auto *label_bold = new wxStaticText(this, wxID_ANY, text_bold);
label_bold->SetFont(boldfont);
label_bold->Wrap(WRAP_WIDTH);
append(label_bold);
append_text(_(L("Additionally a backup snapshot of the whole configuration is created before an update is applied.")));
box_slic3r->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) { this->version_check = event.IsChecked(); });
box_presets->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) { this->preset_update = event.IsChecked(); });
}
PageMode::PageMode(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("View mode")), _(L("View mode")))
{
append_text(_(L("PrusaSlicer's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\n"
"The Simple mode shows only the most frequently used settings relevant for regular 3D printing. "
"The other two offer progressivly more sophisticated fine-tuning, "
"they are suitable for advanced and expert usiser, respectively.")));
radio_simple = new wxRadioButton(this, wxID_ANY, _(L("Simple mode")));
radio_advanced = new wxRadioButton(this, wxID_ANY, _(L("Advanced mode")));
radio_expert = new wxRadioButton(this, wxID_ANY, _(L("Expert mode")));
append(radio_simple);
append(radio_advanced);
append(radio_expert);
}
void PageMode::on_activate()
{
std::string mode { "simple" };
wxGetApp().app_config->get("", "view_mode", mode);
if (mode == "advanced") { radio_advanced->SetValue(true); }
else if (mode == "expert") { radio_expert->SetValue(true); }
else { radio_simple->SetValue(true); }
}
void PageMode::serialize_mode(AppConfig *app_config) const
{
const char *mode = "simple";
if (radio_advanced->GetValue()) { mode = "advanced"; }
if (radio_expert->GetValue()) { mode = "expert"; }
app_config->set("view_mode", mode);
}
PageVendors::PageVendors(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("Other Vendors")), _(L("Other Vendors")))
{
const AppConfig &appconfig = this->wizard_p()->appconfig_new;
append_text(wxString::Format(_(L("Pick another vendor supported by %s: (FIXME: this text)")), SLIC3R_APP_NAME));
auto boldfont = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
boldfont.SetWeight(wxFONTWEIGHT_BOLD);
for (const auto &pair : wizard_p()->bundles) {
const VendorProfile *vendor = pair.second.vendor_profile;
if (vendor->id == PresetBundle::PRUSA_BUNDLE) { continue; }
auto *cbox = new wxCheckBox(this, wxID_ANY, vendor->name);
cbox->Bind(wxEVT_CHECKBOX, [=](wxCommandEvent &event) {
wizard_p()->on_3rdparty_install(vendor, cbox->IsChecked());
});
const auto &vendors = appconfig.vendors();
const bool enabled = vendors.find(pair.first) != vendors.end();
if (enabled) {
cbox->SetValue(true);
auto pair = wizard_p()->pages_3rdparty.find(vendor->id);
wxCHECK_RET(pair != wizard_p()->pages_3rdparty.end(), "Internal error: 3rd party vendor printers page not created");
pair->second->install = true;
}
append(cbox);
}
}
PageFirmware::PageFirmware(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("Firmware Type")), _(L("Firmware")), 1)
, gcode_opt(*print_config_def.get("gcode_flavor"))
, gcode_picker(nullptr)
{
append_text(_(L("Choose the type of firmware used by your printer.")));
append_text(_(gcode_opt.tooltip));
wxArrayString choices;
choices.Alloc(gcode_opt.enum_labels.size());
for (const auto &label : gcode_opt.enum_labels) {
choices.Add(label);
}
gcode_picker = new wxChoice(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, choices);
const auto &enum_values = gcode_opt.enum_values;
auto needle = enum_values.cend();
if (gcode_opt.default_value) {
needle = std::find(enum_values.cbegin(), enum_values.cend(), gcode_opt.default_value->serialize());
}
if (needle != enum_values.cend()) {
gcode_picker->SetSelection(needle - enum_values.cbegin());
} else {
gcode_picker->SetSelection(0);
}
append(gcode_picker);
}
void PageFirmware::apply_custom_config(DynamicPrintConfig &config)
{
auto sel = gcode_picker->GetSelection();
if (sel >= 0 && (size_t)sel < gcode_opt.enum_labels.size()) {
auto *opt = new ConfigOptionEnum<GCodeFlavor>(static_cast<GCodeFlavor>(sel));
config.set_key_value("gcode_flavor", opt);
}
}
PageBedShape::PageBedShape(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("Bed Shape and Size")), _(L("Bed Shape")), 1)
, shape_panel(new BedShapePanel(this))
{
append_text(_(L("Set the shape of your printer's bed.")));
shape_panel->build_panel(*wizard_p()->custom_config->option<ConfigOptionPoints>("bed_shape"),
*wizard_p()->custom_config->option<ConfigOptionString>("bed_custom_texture"),
*wizard_p()->custom_config->option<ConfigOptionString>("bed_custom_model"));
append(shape_panel);
}
void PageBedShape::apply_custom_config(DynamicPrintConfig &config)
{
const std::vector<Vec2d>& points = shape_panel->get_shape();
const std::string& custom_texture = shape_panel->get_custom_texture();
const std::string& custom_model = shape_panel->get_custom_model();
config.set_key_value("bed_shape", new ConfigOptionPoints(points));
config.set_key_value("bed_custom_texture", new ConfigOptionString(custom_texture));
config.set_key_value("bed_custom_model", new ConfigOptionString(custom_model));
}
PageDiameters::PageDiameters(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("Filament and Nozzle Diameters")), _(L("Print Diameters")), 1)
, spin_nozzle(new wxSpinCtrlDouble(this, wxID_ANY))
, spin_filam(new wxSpinCtrlDouble(this, wxID_ANY))
{
spin_nozzle->SetDigits(2);
spin_nozzle->SetIncrement(0.1);
auto *default_nozzle = print_config_def.get("nozzle_diameter")->get_default_value<ConfigOptionFloats>();
spin_nozzle->SetValue(default_nozzle != nullptr && default_nozzle->size() > 0 ? default_nozzle->get_at(0) : 0.5);
spin_filam->SetDigits(2);
spin_filam->SetIncrement(0.25);
auto *default_filam = print_config_def.get("filament_diameter")->get_default_value<ConfigOptionFloats>();
spin_filam->SetValue(default_filam != nullptr && default_filam->size() > 0 ? default_filam->get_at(0) : 3.0);
append_text(_(L("Enter the diameter of your printer's hot end nozzle.")));
auto *sizer_nozzle = new wxFlexGridSizer(3, 5, 5);
auto *text_nozzle = new wxStaticText(this, wxID_ANY, _(L("Nozzle Diameter:")));
auto *unit_nozzle = new wxStaticText(this, wxID_ANY, _(L("mm")));
sizer_nozzle->AddGrowableCol(0, 1);
sizer_nozzle->Add(text_nozzle, 0, wxALIGN_CENTRE_VERTICAL);
sizer_nozzle->Add(spin_nozzle);
sizer_nozzle->Add(unit_nozzle, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_nozzle);
append_spacer(VERTICAL_SPACING);
append_text(_(L("Enter the diameter of your filament.")));
append_text(_(L("Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average.")));
auto *sizer_filam = new wxFlexGridSizer(3, 5, 5);
auto *text_filam = new wxStaticText(this, wxID_ANY, _(L("Filament Diameter:")));
auto *unit_filam = new wxStaticText(this, wxID_ANY, _(L("mm")));
sizer_filam->AddGrowableCol(0, 1);
sizer_filam->Add(text_filam, 0, wxALIGN_CENTRE_VERTICAL);
sizer_filam->Add(spin_filam);
sizer_filam->Add(unit_filam, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_filam);
}
void PageDiameters::apply_custom_config(DynamicPrintConfig &config)
{
auto *opt_nozzle = new ConfigOptionFloats(1, spin_nozzle->GetValue());
config.set_key_value("nozzle_diameter", opt_nozzle);
auto *opt_filam = new ConfigOptionFloats(1, spin_filam->GetValue());
config.set_key_value("filament_diameter", opt_filam);
auto set_extrusion_width = [&config, opt_nozzle](const char *key, double dmr) {
char buf[64];
sprintf(buf, "%.2lf", dmr * opt_nozzle->values.front() / 0.4);
config.set_key_value(key, new ConfigOptionFloatOrPercent(atof(buf), false));
};
set_extrusion_width("support_material_extrusion_width", 0.35);
set_extrusion_width("top_infill_extrusion_width", 0.40);
set_extrusion_width("first_layer_extrusion_width", 0.42);
set_extrusion_width("extrusion_width", 0.45);
set_extrusion_width("perimeter_extrusion_width", 0.45);
set_extrusion_width("external_perimeter_extrusion_width", 0.45);
set_extrusion_width("infill_extrusion_width", 0.45);
set_extrusion_width("solid_infill_extrusion_width", 0.45);
}
PageTemperatures::PageTemperatures(ConfigWizard *parent)
: ConfigWizardPage(parent, _(L("Extruder and Bed Temperatures")), _(L("Temperatures")), 1)
, spin_extr(new wxSpinCtrlDouble(this, wxID_ANY))
, spin_bed(new wxSpinCtrlDouble(this, wxID_ANY))
{
spin_extr->SetIncrement(5.0);
const auto &def_extr = *print_config_def.get("temperature");
spin_extr->SetRange(def_extr.min, def_extr.max);
auto *default_extr = def_extr.get_default_value<ConfigOptionInts>();
spin_extr->SetValue(default_extr != nullptr && default_extr->size() > 0 ? default_extr->get_at(0) : 200);
spin_bed->SetIncrement(5.0);
const auto &def_bed = *print_config_def.get("bed_temperature");
spin_bed->SetRange(def_bed.min, def_bed.max);
auto *default_bed = def_bed.get_default_value<ConfigOptionInts>();
spin_bed->SetValue(default_bed != nullptr && default_bed->size() > 0 ? default_bed->get_at(0) : 0);
append_text(_(L("Enter the temperature needed for extruding your filament.")));
append_text(_(L("A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS.")));
auto *sizer_extr = new wxFlexGridSizer(3, 5, 5);
auto *text_extr = new wxStaticText(this, wxID_ANY, _(L("Extrusion Temperature:")));
auto *unit_extr = new wxStaticText(this, wxID_ANY, _(L("°C")));
sizer_extr->AddGrowableCol(0, 1);
sizer_extr->Add(text_extr, 0, wxALIGN_CENTRE_VERTICAL);
sizer_extr->Add(spin_extr);
sizer_extr->Add(unit_extr, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_extr);
append_spacer(VERTICAL_SPACING);
append_text(_(L("Enter the bed temperature needed for getting your filament to stick to your heated bed.")));
append_text(_(L("A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed.")));
auto *sizer_bed = new wxFlexGridSizer(3, 5, 5);
auto *text_bed = new wxStaticText(this, wxID_ANY, _(L("Bed Temperature:")));
auto *unit_bed = new wxStaticText(this, wxID_ANY, _(L("°C")));
sizer_bed->AddGrowableCol(0, 1);
sizer_bed->Add(text_bed, 0, wxALIGN_CENTRE_VERTICAL);
sizer_bed->Add(spin_bed);
sizer_bed->Add(unit_bed, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_bed);
}
void PageTemperatures::apply_custom_config(DynamicPrintConfig &config)
{
auto *opt_extr = new ConfigOptionInts(1, spin_extr->GetValue());
config.set_key_value("temperature", opt_extr);
auto *opt_extr1st = new ConfigOptionInts(1, spin_extr->GetValue());
config.set_key_value("first_layer_temperature", opt_extr1st);
auto *opt_bed = new ConfigOptionInts(1, spin_bed->GetValue());
config.set_key_value("bed_temperature", opt_bed);
auto *opt_bed1st = new ConfigOptionInts(1, spin_bed->GetValue());
config.set_key_value("first_layer_bed_temperature", opt_bed1st);
}
// Index
ConfigWizardIndex::ConfigWizardIndex(wxWindow *parent)
: wxPanel(parent)
, bg(ScalableBitmap(parent, "PrusaSlicer_192px_transparent.png", 192))
, bullet_black(ScalableBitmap(parent, "bullet_black.png"))
, bullet_blue(ScalableBitmap(parent, "bullet_blue.png"))
, bullet_white(ScalableBitmap(parent, "bullet_white.png"))
, item_active(NO_ITEM)
, item_hover(NO_ITEM)
, last_page((size_t)-1)
{
SetMinSize(bg.bmp().GetSize());
const wxSize size = GetTextExtent("m");
em_w = size.x;
em_h = size.y;
// Add logo bitmap.
// This could be done in on_paint() along with the index labels, but I've found it tricky
// to get the bitmap rendered well on all platforms with transparent background.
// In some cases it didn't work at all. And so wxStaticBitmap is used here instead,
// because it has all the platform quirks figured out.
auto *sizer = new wxBoxSizer(wxVERTICAL);
logo = new wxStaticBitmap(this, wxID_ANY, bg.bmp());
sizer->AddStretchSpacer();
sizer->Add(logo);
SetSizer(sizer);
Bind(wxEVT_PAINT, &ConfigWizardIndex::on_paint, this);
Bind(wxEVT_MOTION, &ConfigWizardIndex::on_mouse_move, this);
Bind(wxEVT_LEAVE_WINDOW, [this](wxMouseEvent &evt) {
if (item_hover != -1) {
item_hover = -1;
Refresh();
}
evt.Skip();
});
Bind(wxEVT_LEFT_UP, [this](wxMouseEvent &evt) {
if (item_hover >= 0) { go_to(item_hover); }
});
}
wxDECLARE_EVENT(EVT_INDEX_PAGE, wxCommandEvent);
void ConfigWizardIndex::add_page(ConfigWizardPage *page)
{
last_page = items.size();
items.emplace_back(Item { page->shortname, page->indent, page });
Refresh();
}
void ConfigWizardIndex::add_label(wxString label, unsigned indent)
{
items.emplace_back(Item { std::move(label), indent, nullptr });
Refresh();
}
ConfigWizardPage* ConfigWizardIndex::active_page() const
{
if (item_active >= items.size()) { return nullptr; }
return items[item_active].page;
}
void ConfigWizardIndex::go_prev()
{
// Search for a preceiding item that is a page (not a label, ie. page != nullptr)
if (item_active == NO_ITEM) { return; }
for (size_t i = item_active; i > 0; i--) {
if (items[i - 1].page != nullptr) {
go_to(i - 1);
return;
}
}
}
void ConfigWizardIndex::go_next()
{
// Search for a next item that is a page (not a label, ie. page != nullptr)
if (item_active == NO_ITEM) { return; }
for (size_t i = item_active + 1; i < items.size(); i++) {
if (items[i].page != nullptr) {
go_to(i);
return;
}
}
}
// This one actually performs the go-to op
void ConfigWizardIndex::go_to(size_t i)
{
if (i != item_active
&& i < items.size()
&& items[i].page != nullptr) {
auto *new_active = items[i].page;
auto *former_active = active_page();
if (former_active != nullptr) {
former_active->Hide();
}
item_active = i;
new_active->Show();
wxCommandEvent evt(EVT_INDEX_PAGE, GetId());
AddPendingEvent(evt);
Refresh();
new_active->on_activate();
}
}
void ConfigWizardIndex::go_to(const ConfigWizardPage *page)
{
if (page == nullptr) { return; }
for (size_t i = 0; i < items.size(); i++) {
if (items[i].page == page) {
go_to(i);
return;
}
}
}
void ConfigWizardIndex::clear()
{
auto *former_active = active_page();
if (former_active != nullptr) { former_active->Hide(); }
items.clear();
item_active = NO_ITEM;
}
void ConfigWizardIndex::on_paint(wxPaintEvent & evt)
{
const auto size = GetClientSize();
if (size.GetHeight() == 0 || size.GetWidth() == 0) { return; }
wxPaintDC dc(this);
const auto bullet_w = bullet_black.bmp().GetSize().GetWidth();
const auto bullet_h = bullet_black.bmp().GetSize().GetHeight();
const int yoff_icon = bullet_h < em_h ? (em_h - bullet_h) / 2 : 0;
const int yoff_text = bullet_h > em_h ? (bullet_h - em_h) / 2 : 0;
const int yinc = item_height();
int index_width = 0;
unsigned y = 0;
for (size_t i = 0; i < items.size(); i++) {
const Item& item = items[i];
unsigned x = em_w/2 + item.indent * em_w;
if (i == item_active || (item_hover >= 0 && i == (size_t)item_hover)) {
dc.DrawBitmap(bullet_blue.bmp(), x, y + yoff_icon, false);
}
else if (i < item_active) { dc.DrawBitmap(bullet_black.bmp(), x, y + yoff_icon, false); }
else if (i > item_active) { dc.DrawBitmap(bullet_white.bmp(), x, y + yoff_icon, false); }
x += + bullet_w + em_w/2;
const auto text_size = dc.GetTextExtent(item.label);
dc.DrawText(item.label, x, y + yoff_text);
y += yinc;
index_width = std::max(index_width, (int)x + text_size.x);
}
if (GetMinSize().x < index_width) {
CallAfter([this, index_width]() {
SetMinSize(wxSize(index_width, GetMinSize().y));
Refresh();
});
}
}
void ConfigWizardIndex::on_mouse_move(wxMouseEvent &evt)
{
const wxClientDC dc(this);
const wxPoint pos = evt.GetLogicalPosition(dc);
const ssize_t item_hover_new = pos.y / item_height();
if (item_hover_new < ssize_t(items.size()) && item_hover_new != item_hover) {
item_hover = item_hover_new;
Refresh();
}
evt.Skip();
}
void ConfigWizardIndex::msw_rescale()
{
const wxSize size = GetTextExtent("m");
em_w = size.x;
em_h = size.y;
bg.msw_rescale();
SetMinSize(bg.bmp().GetSize());
logo->SetBitmap(bg.bmp());
bullet_black.msw_rescale();
bullet_blue.msw_rescale();
bullet_white.msw_rescale();
Refresh();
}
// Materials
const std::string Materials::UNKNOWN = "(Unknown)";
void Materials::push(const Preset *preset)
{
presets.insert(preset);
types.insert(technology & T_FFF
? Materials::get_filament_type(preset)
: Materials::get_material_type(preset));
}
void Materials::clear()
{
presets.clear();
types.clear();
}
const std::string& Materials::appconfig_section() const
{
return (technology & T_FFF) ? AppConfig::SECTION_FILAMENTS : AppConfig::SECTION_MATERIALS;
}
const std::string& Materials::get_type(const Preset *preset) const
{
return (technology & T_FFF) ? get_filament_type(preset) : get_material_type(preset);
}
const std::string& Materials::get_vendor(const Preset *preset) const
{
return (technology & T_FFF) ? get_filament_vendor(preset) : get_material_vendor(preset);
}
const std::string& Materials::get_filament_type(const Preset *preset)
{
const auto *opt = preset->config.opt<ConfigOptionStrings>("filament_type");
if (opt != nullptr && opt->values.size() > 0) {
return opt->values[0];
} else {
return UNKNOWN;
}
}
const std::string& Materials::get_filament_vendor(const Preset *preset)
{
const auto *opt = preset->config.opt<ConfigOptionString>("filament_vendor");
return opt != nullptr ? opt->value : UNKNOWN;
}
const std::string& Materials::get_material_type(const Preset *preset)
{
const auto *opt = preset->config.opt<ConfigOptionString>("material_type");
if (opt != nullptr) {
return opt->value;
} else {
return UNKNOWN;
}
}
const std::string& Materials::get_material_vendor(const Preset *preset)
{
const auto *opt = preset->config.opt<ConfigOptionString>("material_vendor");
return opt != nullptr ? opt->value : UNKNOWN;
}
// priv
static const std::unordered_map<std::string, std::pair<std::string, std::string>> legacy_preset_map {{
{ "Original Prusa i3 MK2.ini", std::make_pair("MK2S", "0.4") },
{ "Original Prusa i3 MK2 MM Single Mode.ini", std::make_pair("MK2SMM", "0.4") },
{ "Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini", std::make_pair("MK2SMM", "0.6") },
{ "Original Prusa i3 MK2 MultiMaterial.ini", std::make_pair("MK2SMM", "0.4") },
{ "Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini", std::make_pair("MK2SMM", "0.6") },
{ "Original Prusa i3 MK2 0.25 nozzle.ini", std::make_pair("MK2S", "0.25") },
{ "Original Prusa i3 MK2 0.6 nozzle.ini", std::make_pair("MK2S", "0.6") },
{ "Original Prusa i3 MK3.ini", std::make_pair("MK3", "0.4") },
}};
void ConfigWizard::priv::load_pages()
{
wxWindowUpdateLocker freeze_guard(q);
(void)freeze_guard;
const ConfigWizardPage *former_active = index->active_page();
index->clear();
index->add_page(page_welcome);
// Printers
index->add_page(page_fff);
index->add_page(page_msla);
index->add_page(page_vendors);
for (const auto &pair : pages_3rdparty) {
PagePrinters *page = pair.second;
if (page->install) { index->add_page(page); }
}
index->add_page(page_custom);
if (page_custom->custom_wanted()) {
index->add_page(page_firmware);
index->add_page(page_bed);
index->add_page(page_diams);
index->add_page(page_temps);
}
// Filaments & Materials
if (any_fff_selected) { index->add_page(page_filaments); }
if (any_sla_selected) { index->add_page(page_sla_materials); }
index->add_page(page_update);
index->add_page(page_mode);
index->go_to(former_active); // Will restore the active item/page if possible
q->Layout();
}
void ConfigWizard::priv::init_dialog_size()
{
// Clamp the Wizard size based on screen dimensions
const auto idx = wxDisplay::GetFromWindow(q);
wxDisplay display(idx != wxNOT_FOUND ? idx : 0u);
const auto disp_rect = display.GetClientArea();
wxRect window_rect(
disp_rect.x + disp_rect.width / 20,
disp_rect.y + disp_rect.height / 20,
9*disp_rect.width / 10,
9*disp_rect.height / 10);
const int width_hint = index->GetSize().GetWidth() + page_fff->get_width() + 30 * em(); // XXX: magic constant, I found no better solution
if (width_hint < window_rect.width) {
window_rect.x += (window_rect.width - width_hint) / 2;
window_rect.width = width_hint;
}
q->SetSize(window_rect);
}
void ConfigWizard::priv::load_vendors()
{
bundles = BundleMap::load();
// Load up the set of vendors / models / variants the user has had enabled up till now
AppConfig *app_config = wxGetApp().app_config;
if (! app_config->legacy_datadir()) {
appconfig_new.set_vendors(*app_config);
} else {
// In case of legacy datadir, try to guess the preference based on the printer preset files that are present
const auto printer_dir = fs::path(Slic3r::data_dir()) / "printer";
for (auto &dir_entry : boost::filesystem::directory_iterator(printer_dir))
if (Slic3r::is_ini_file(dir_entry)) {
auto needle = legacy_preset_map.find(dir_entry.path().filename().string());
if (needle == legacy_preset_map.end()) { continue; }
const auto &model = needle->second.first;
const auto &variant = needle->second.second;
appconfig_new.set_variant("PrusaResearch", model, variant, true);
}
}
// Initialize the is_visible flag in printer Presets
for (auto &pair : bundles) {
pair.second.preset_bundle->load_installed_printers(appconfig_new);
}
update_materials(T_ANY);
if (app_config->has_section(AppConfig::SECTION_FILAMENTS)) {
appconfig_new.set_section(AppConfig::SECTION_FILAMENTS, app_config->get_section(AppConfig::SECTION_FILAMENTS));
}
if (app_config->has_section(AppConfig::SECTION_MATERIALS)) {
appconfig_new.set_section(AppConfig::SECTION_MATERIALS, app_config->get_section(AppConfig::SECTION_MATERIALS));
}
}
void ConfigWizard::priv::add_page(ConfigWizardPage *page)
{
hscroll_sizer->Add(page, 0, wxEXPAND);
all_pages.push_back(page);
}
void ConfigWizard::priv::enable_next(bool enable)
{
btn_next->Enable(enable);
btn_finish->Enable(enable);
}
void ConfigWizard::priv::set_start_page(ConfigWizard::StartPage start_page)
{
switch (start_page) {
case ConfigWizard::SP_PRINTERS: index->go_to(page_fff); break;
case ConfigWizard::SP_FILAMENTS: index->go_to(page_filaments); break;
case ConfigWizard::SP_MATERIALS: index->go_to(page_sla_materials); break;
default: index->go_to(page_welcome); break;
}
}
void ConfigWizard::priv::create_3rdparty_pages()
{
for (const auto &pair : bundles) {
const VendorProfile *vendor = pair.second.vendor_profile;
if (vendor->id == PresetBundle::PRUSA_BUNDLE) { continue; }
auto *page = new PagePrinters(q, vendor->name, vendor->name, *vendor, 1, T_ANY);
add_page(page);
pages_3rdparty.insert({vendor->id, page});
}
}
void ConfigWizard::priv::set_run_reason(RunReason run_reason)
{
this->run_reason = run_reason;
for (auto &page : all_pages) {
page->set_run_reason(run_reason);
}
}
void ConfigWizard::priv::update_materials(Technology technology)
{
if (any_fff_selected && (technology & T_FFF)) {
filaments.clear();
// Iterate filaments in all bundles
for (const auto &pair : bundles) {
for (const auto &filament : pair.second.preset_bundle->filaments) {
// Check if filament is already added
if (filaments.containts(&filament)) { continue; }
// Iterate printers in all bundles
for (const auto &pair : bundles) {
for (const auto &printer : pair.second.preset_bundle->printers) {
// Filter out inapplicable printers
if (!printer.is_visible || printer.printer_technology() != ptFFF) {
continue;
}
if (filament.is_compatible_with_printer(printer)) {
filaments.push(&filament);
}
}
}
}
}
}
if (any_sla_selected && (technology & T_SLA)) {
sla_materials.clear();
// Iterate SLA materials in all bundles
for (const auto &pair : bundles) {
for (const auto &material : pair.second.preset_bundle->sla_materials) {
// Check if material is already added
if (sla_materials.containts(&material)) { continue; }
// Iterate printers in all bundles
for (const auto &pair : bundles) {
for (const auto &printer : pair.second.preset_bundle->printers) {
// Filter out inapplicable printers
if (!printer.is_visible || printer.printer_technology() != ptSLA) {
continue;
}
if (material.is_compatible_with_printer(printer)) {
sla_materials.push(&material);
}
}
}
}
}
}
}
void ConfigWizard::priv::on_custom_setup()
{
load_pages();
}
void ConfigWizard::priv::on_printer_pick(PagePrinters *page, const PrinterPickerEvent &evt)
{
if (page_msla->any_selected() != any_sla_selected ||
page_fff->any_selected() != any_fff_selected) {
any_fff_selected = page_fff->any_selected();
any_sla_selected = page_msla->any_selected();
load_pages();
}
// Update the is_visible flag on relevant printer profiles
for (auto &pair : bundles) {
if (pair.first != evt.vendor_id) { continue; }
for (auto &preset : pair.second.preset_bundle->printers) {
if (preset.config.opt_string("printer_model") == evt.model_id
&& preset.config.opt_string("printer_variant") == evt.variant_name) {
preset.is_visible = evt.enable;
}
}
}
if (page == page_fff) {
page_filaments->clear();
} else if (page == page_msla) {
page_sla_materials->clear();
}
}
void ConfigWizard::priv::on_3rdparty_install(const VendorProfile *vendor, bool install)
{
auto it = pages_3rdparty.find(vendor->id);
wxCHECK_RET(it != pages_3rdparty.end(), "Internal error: GUI page not found for 3rd party vendor profile");
PagePrinters *page = it->second;
if (page->install && !install) {
page->select_all(false);
}
page->install = install;
page->Layout();
load_pages();
}
void ConfigWizard::priv::apply_config(AppConfig *app_config, PresetBundle *preset_bundle, const PresetUpdater *updater)
{
const auto enabled_vendors = appconfig_new.vendors();
// Install bundles from resources if needed:
std::vector<std::string> install_bundles;
for (const auto &pair : bundles) {
if (! pair.second.is_in_resources) { continue; }
if (pair.second.is_prusa_bundle) {
// Always install Prusa bundle, because it has a lot of filaments/materials
// likely to be referenced by other profiles.
install_bundles.emplace_back(pair.first);
continue;
}
const auto vendor = enabled_vendors.find(pair.first);
if (vendor == enabled_vendors.end()) { continue; }
size_t size_sum = 0;
for (const auto &model : vendor->second) { size_sum += model.second.size(); }
if (size_sum > 0) {
// This vendor needs to be installed
install_bundles.emplace_back(pair.first);
}
}
// Decide whether to create snapshot based on run_reason and the reset profile checkbox
bool snapshot = true;
Snapshot::Reason snapshot_reason = Snapshot::SNAPSHOT_UPGRADE;
switch (run_reason) {
case ConfigWizard::RR_DATA_EMPTY:
snapshot = false;
break;
case ConfigWizard::RR_DATA_LEGACY:
snapshot = true;
break;
case ConfigWizard::RR_DATA_INCOMPAT:
// In this case snapshot has already been taken by
// PresetUpdater with the appropriate reason
snapshot = false;
break;
case ConfigWizard::RR_USER:
snapshot = page_welcome->reset_user_profile();
snapshot_reason = Snapshot::SNAPSHOT_USER;
break;
}
if (snapshot) {
SnapshotDB::singleton().take_snapshot(*app_config, snapshot_reason);
}
if (install_bundles.size() > 0) {
// Install bundles from resources.
// Don't create snapshot - we've already done that above if applicable.
updater->install_bundles_rsrc(std::move(install_bundles), false);
} else {
BOOST_LOG_TRIVIAL(info) << "No bundles need to be installed from resources";
}
if (page_welcome->reset_user_profile()) {
BOOST_LOG_TRIVIAL(info) << "Resetting user profiles...";
preset_bundle->reset(true);
}
app_config->set_vendors(appconfig_new);
if (appconfig_new.has_section(AppConfig::SECTION_FILAMENTS)) {
app_config->set_section(AppConfig::SECTION_FILAMENTS, appconfig_new.get_section(AppConfig::SECTION_FILAMENTS));
}
if (appconfig_new.has_section(AppConfig::SECTION_MATERIALS)) {
app_config->set_section(AppConfig::SECTION_MATERIALS, appconfig_new.get_section(AppConfig::SECTION_MATERIALS));
}
app_config->set("version_check", page_update->version_check ? "1" : "0");
app_config->set("preset_update", page_update->preset_update ? "1" : "0");
page_mode->serialize_mode(app_config);
std::string preferred_model;
// Figure out the default pre-selected printer based on the selections in the pickers.
// The default is the first selected printer model (one with at least 1 variant selected).
// The default is only applied by load_presets() if the user doesn't have a (visible) printer
// selected already.
// Prusa printers are considered first, then 3rd party.
const auto config_prusa = enabled_vendors.find("PrusaResearch");
if (config_prusa != enabled_vendors.end()) {
for (const auto &model : bundles.prusa_bundle().vendor_profile->models) {
const auto model_it = config_prusa->second.find(model.id);
if (model_it != config_prusa->second.end() && model_it->second.size() > 0) {
preferred_model = model.id;
break;
}
}
}
if (preferred_model.empty()) {
for (const auto &bundle : bundles) {
if (bundle.second.is_prusa_bundle) { continue; }
const auto config = enabled_vendors.find(bundle.first);
for (const auto &model : bundle.second.vendor_profile->models) {
const auto model_it = config->second.find(model.id);
if (model_it != config->second.end() && model_it->second.size() > 0) {
preferred_model = model.id;
break;
}
}
}
}
preset_bundle->load_presets(*app_config, preferred_model);
if (page_custom->custom_wanted()) {
page_firmware->apply_custom_config(*custom_config);
page_bed->apply_custom_config(*custom_config);
page_diams->apply_custom_config(*custom_config);
page_temps->apply_custom_config(*custom_config);
const std::string profile_name = page_custom->profile_name();
preset_bundle->load_config(profile_name, *custom_config);
}
// Update the selections from the compatibilty.
preset_bundle->export_selections(*app_config);
}
// Public
ConfigWizard::ConfigWizard(wxWindow *parent)
: DPIDialog(parent, wxID_ANY, wxString(SLIC3R_APP_NAME) + " - " + name(), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER)
, p(new priv(this))
{
this->SetFont(wxGetApp().normal_font());
p->load_vendors();
p->custom_config.reset(DynamicPrintConfig::new_from_defaults_keys({
"gcode_flavor", "bed_shape", "bed_custom_texture", "bed_custom_model", "nozzle_diameter", "filament_diameter", "temperature", "bed_temperature",
}));
p->index = new ConfigWizardIndex(this);
auto *vsizer = new wxBoxSizer(wxVERTICAL);
auto *topsizer = new wxBoxSizer(wxHORIZONTAL);
auto *hline = new wxStaticLine(this);
p->btnsizer = new wxBoxSizer(wxHORIZONTAL);
// Initially we _do not_ SetScrollRate in order to figure out the overall width of the Wizard without scrolling.
// Later, we compare that to the size of the current screen and set minimum width based on that (see below).
p->hscroll = new wxScrolledWindow(this);
p->hscroll_sizer = new wxBoxSizer(wxHORIZONTAL);
p->hscroll->SetSizer(p->hscroll_sizer);
topsizer->Add(p->index, 0, wxEXPAND);
topsizer->AddSpacer(INDEX_MARGIN);
topsizer->Add(p->hscroll, 1, wxEXPAND);
p->btn_sel_all = new wxButton(this, wxID_ANY, _(L("Select all standard printers")));
p->btnsizer->Add(p->btn_sel_all);
p->btn_prev = new wxButton(this, wxID_ANY, _(L("< &Back")));
p->btn_next = new wxButton(this, wxID_ANY, _(L("&Next >")));
p->btn_finish = new wxButton(this, wxID_APPLY, _(L("&Finish")));
p->btn_cancel = new wxButton(this, wxID_CANCEL, _(L("Cancel"))); // Note: The label needs to be present, otherwise we get accelerator bugs on Mac
p->btnsizer->AddStretchSpacer();
p->btnsizer->Add(p->btn_prev, 0, wxLEFT, BTN_SPACING);
p->btnsizer->Add(p->btn_next, 0, wxLEFT, BTN_SPACING);
p->btnsizer->Add(p->btn_finish, 0, wxLEFT, BTN_SPACING);
p->btnsizer->Add(p->btn_cancel, 0, wxLEFT, BTN_SPACING);
const auto prusa_it = p->bundles.find("PrusaResearch");
wxCHECK_RET(prusa_it != p->bundles.cend(), "Vendor PrusaResearch not found");
const VendorProfile *vendor_prusa = prusa_it->second.vendor_profile;
p->add_page(p->page_welcome = new PageWelcome(this));
p->page_fff = new PagePrinters(this, _(L("Prusa FFF Technology Printers")), "Prusa FFF", *vendor_prusa, 0, T_FFF);
p->add_page(p->page_fff);
p->page_msla = new PagePrinters(this, _(L("Prusa MSLA Technology Printers")), "Prusa MSLA", *vendor_prusa, 0, T_SLA);
p->add_page(p->page_msla);
p->add_page(p->page_filaments = new PageMaterials(this, &p->filaments,
_(L("Filament Profiles Selection")), _(L("Filaments")), _(L("Type:")) ));
p->add_page(p->page_sla_materials = new PageMaterials(this, &p->sla_materials,
_(L("SLA Material Profiles Selection")), _(L("SLA Materials")), _(L("Layer height:")) ));
p->add_page(p->page_custom = new PageCustom(this));
p->add_page(p->page_update = new PageUpdate(this));
p->add_page(p->page_mode = new PageMode(this));
p->add_page(p->page_firmware = new PageFirmware(this));
p->add_page(p->page_bed = new PageBedShape(this));
p->add_page(p->page_diams = new PageDiameters(this));
p->add_page(p->page_temps = new PageTemperatures(this));
// Pages for 3rd party vendors
p->create_3rdparty_pages(); // Needs to ne done _before_ creating PageVendors
p->add_page(p->page_vendors = new PageVendors(this));
p->any_sla_selected = p->page_msla->any_selected();
p->any_fff_selected = p->page_fff->any_selected();
p->load_pages();
p->index->go_to(size_t{0});
vsizer->Add(topsizer, 1, wxEXPAND | wxALL, DIALOG_MARGIN);
vsizer->Add(hline, 0, wxEXPAND);
vsizer->Add(p->btnsizer, 0, wxEXPAND | wxALL, DIALOG_MARGIN);
SetSizer(vsizer);
SetSizerAndFit(vsizer);
// We can now enable scrolling on hscroll
p->hscroll->SetScrollRate(30, 30);
on_window_geometry(this, [this]() {
p->init_dialog_size();
});
p->btn_prev->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &) { this->p->index->go_prev(); });
p->btn_next->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &) { this->p->index->go_next(); });
p->btn_finish->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &) { this->EndModal(wxID_OK); });
p->btn_finish->Hide();
p->btn_sel_all->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &) {
p->any_sla_selected = true;
p->load_pages();
p->page_fff->select_all(true, false);
p->page_msla->select_all(true, false);
p->index->go_to(p->page_mode);
});
p->index->Bind(EVT_INDEX_PAGE, [this](const wxCommandEvent &) {
const bool is_last = p->index->active_is_last();
p->btn_next->Show(! is_last);
p->btn_finish->Show(is_last);
Layout();
});
}
ConfigWizard::~ConfigWizard() {}
bool ConfigWizard::run(RunReason reason, StartPage start_page)
{
BOOST_LOG_TRIVIAL(info) << boost::format("Running ConfigWizard, reason: %1%, start_page: %2%") % reason % start_page;
GUI_App &app = wxGetApp();
p->set_run_reason(reason);
p->set_start_page(start_page);
if (ShowModal() == wxID_OK) {
p->apply_config(app.app_config, app.preset_bundle, app.preset_updater);
app.app_config->set_legacy_datadir(false);
app.update_mode();
BOOST_LOG_TRIVIAL(info) << "ConfigWizard applied";
return true;
} else {
BOOST_LOG_TRIVIAL(info) << "ConfigWizard cancelled";
return false;
}
}
const wxString& ConfigWizard::name(const bool from_menu/* = false*/)
{
// A different naming convention is used for the Wizard on Windows & GTK vs. OSX.
// Note: Don't call _() macro here.
// This function just return the current name according to the OS.
// Translation is implemented inside GUI_App::add_config_menu()
#if __APPLE__
static const wxString config_wizard_name = L("Configuration Assistant");
static const wxString config_wizard_name_menu = L("Configuration &Assistant");
#else
static const wxString config_wizard_name = L("Configuration Wizard");
static const wxString config_wizard_name_menu = L("Configuration &Wizard");
#endif
return from_menu ? config_wizard_name_menu : config_wizard_name;
}
void ConfigWizard::on_dpi_changed(const wxRect &suggested_rect)
{
p->index->msw_rescale();
const int em = em_unit();
msw_buttons_rescale(this, em, { wxID_APPLY,
wxID_CANCEL,
p->btn_sel_all->GetId(),
p->btn_next->GetId(),
p->btn_prev->GetId() });
for (auto printer_picker: p->page_fff->printer_pickers)
msw_buttons_rescale(this, em, printer_picker->get_button_indexes());
p->init_dialog_size();
Refresh();
}
}
}
Reference in New Issue View Git Blame Copy Permalink